debian/0000775000000000000000000000000012264344261007174 5ustar debian/rules0000775000000000000000000000764512264344177010276 0ustar #!/usr/bin/make -f # -*- makefile -*- # Sample debian/rules that uses debhelper. # This file was originally written by Joey Hess and Craig Small. # As a special exception, when this file is copied by dh-make into a # dh-make output file, you may use that output file without restriction. # This special exception was added by Craig Small in version 0.37 of dh-make. # Uncomment this to turn on verbose mode. #export DH_VERBOSE=1 # These are used for cross-compiling and for saving the configure script # from having to guess our platform (since we know it already) DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE) DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE) CPPFLAGS :=$(shell dpkg-buildflags --get CPPFLAGS) CFLAGS :=$(shell dpkg-buildflags --get CFLAGS) CXXFLAGS :=$(shell dpkg-buildflags --get CXXFLAGS) LDFLAGS :=$(shell dpkg-buildflags --get LDFLAGS) CFLAGS += -Wall -g ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS))) CFLAGS += -O0 else CFLAGS += -O2 endif ifeq (,$(findstring nostrip,$(DEB_BUILD_OPTIONS))) INSTALL_PROGRAM += -s endif # shared library versions, option 1 version=2.0.5 major=2 # option 2, assuming the library is created as src/.libs/libfoo.so.2.0.5 or so #version=`ls src/.libs/lib*.so.* | \ # awk '{if (match($$0,/[0-9]+\.[0-9]+\.[0-9]+$$/)) print substr($$0,RSTART)}'` #major=`ls src/.libs/lib*.so.* | \ # awk '{if (match($$0,/\.so\.[0-9]+$$/)) print substr($$0,RSTART+4)}'` config.status: configure-stamp configure-stamp: dh_testdir dh_autoreconf # Add here commands to configure the package. LDFLAGS="$(LDFLAGS)" CFLAGS="$(CFLAGS)" \ CPPFLAGS="$(CPPFLAGS)" CXXFLAGS="$(CXXFLAGS)" \ ./configure --host=$(DEB_HOST_GNU_TYPE) \ --build=$(DEB_BUILD_GNU_TYPE) --prefix=/usr \ --mandir=\$${prefix}/share/man --infodir=\$${prefix}/share/info touch configure-stamp build: build-arch build-indep build-arch: build-stamp build-indep: build-stamp build-stamp: configure-stamp dh_testdir # Add here commands to compile the package. $(MAKE) touch build-stamp clean: dh_testdir dh_testroot rm -f build-stamp configure-stamp # Add here commands to clean up after the build process. dh_autoreconf_clean dh_clean install: build dh_testdir dh_testroot dh_prep dh_installdirs # Add here commands to install the package into debian/tmp DESTDIR=$(CURDIR)/debian/tmp $(MAKE) install mkdir -p $(CURDIR)/debian/tmp/usr/share/doc/libcoyotl-dev/html cp -r docs/html/* $(CURDIR)/debian/tmp/usr/share/doc/libcoyotl-dev/html mkdir -p $(CURDIR)/debian/tmp/usr/share/doc/libcoyotl-dev/test cp -r test/* $(CURDIR)/debian/tmp/usr/share/doc/libcoyotl-dev/test rm -f $(CURDIR)/debian/tmp/usr/share/doc/libcoyotl-dev/test/*.o rm -f $(CURDIR)/debian/tmp/usr/share/doc/libcoyotl-dev/test/test_maze rm -f $(CURDIR)/debian/tmp/usr/share/doc/libcoyotl-dev/test/test_prng rm -rf $(CURDIR)/debian/tmp/usr/bin rm -f $(CURDIR)/debian/libcoyotl-dev/usr/share/doc/libcoyotl-dev/test/test_maze rm -f $(CURDIR)/debian/libcoyotl-dev/usr/share/doc/libcoyotl-dev/test/test_prng rm -f $(CURDIR)/debian/libcoyotl-dev/usr/share/doc/libcoyotl-dev/test/*.o rm -rf $(CURDIR)/debian/libcoyotl-dev/usr/share/doc/libcoyotl-dev/test/bin # Build architecture-independent files here. binary-indep: build install # We have nothing to do by default. # Build architecture-dependent files here. binary-arch: build install dh_testdir dh_testroot dh_installchangelogs ChangeLog dh_installdocs dh_installexamples # dh_installdebconf dh_installman dh_install dh_link dh_makeshlibs dh_strip dh_compress dh_fixperms # dh_perl # dh_python dh_installdeb install -m644 debian/shlibs debian/libcoyotl-3.1-4/DEBIAN rm -f debian/libcoyotl-dev/DEBIAN/shlibs sed -i "/dependency_libs/ s/'.*'/''/" `find . -name '*.la'` dh_shlibdeps -plibcoyotl-3.1-4 dh_shlibdeps -plibcoyotl-dev dh_gencontrol dh_md5sums dh_builddeb binary: binary-indep binary-arch .PHONY: build clean binary-indep binary-arch binary install debian/changelog0000664000000000000000000000630012264344254011047 0ustar libcoyotl (3.1.0-6ubuntu1) trusty; urgency=medium * Use dh-autoreconf to get new libtool macros for ppc64el. * Remove config.{sub,guess} logic in d/rules, as autoreconf does this. -- Logan Rosen Sat, 11 Jan 2014 17:41:12 -0500 libcoyotl (3.1.0-6) unstable; urgency=low * Updated Standards-Version * Correct lintian problems by building for hardening properly * Closes: Bug#662395 -- corrected libpng-dev dependency for libpng transition -- Al Stone Fri, 06 Jul 2012 17:03:02 -0600 libcoyotl (3.1.0-5) unstable; urgency=low * Convert to 3.0 (quilt) format. * Incorporate NMU (thanks!) * Incorporate Ubuntu patches (thanks!). Closes: Bug#641702. Also Closes: Bug#641377. * Lintian cleanup: update standards version * Lintian cleanup: add ${misc:Depends} where needed * Lintian cleanup: add build-arch build-indep targets to debian/rules * Lintian cleanup: add Section: libs for source * Lintian cleanup: updated debhelper compat version * Lintian cleanup: point to properly versioned license file -- Al Stone Sat, 26 Nov 2011 16:27:59 -0700 libcoyotl (3.1.0-4.1ubuntu1) oneiric; urgency=low * Avoid building the package twice. * Regenerate the auto* files. LP: #831162. * Add Section attribute to the source package to avoid upload failure. -- Matthias Klose Thu, 15 Sep 2011 10:13:28 +0200 libcoyotl (3.1.0-4.1) unstable; urgency=low * Non-maintainer upload. * Fix g++-4.3 FTBFS Thanks to Cyril Brulebois (Closes: 455274). -- Pierre Habouzit Sun, 16 Mar 2008 21:04:50 +0000 libcoyotl (3.1.0-4) unstable; urgency=low * Closes: bug#417075 -- FTBS with GCC 4.3 * Lintian cleanup -- Al Stone Sun, 25 Nov 2007 16:34:51 -0700 libcoyotl (3.1.0-3) unstable; urgency=low * Corrected shlibs file and use of dh_shlibdeps -- Al Stone Sat, 26 Nov 2005 18:06:43 -0700 libcoyotl (3.1.0-2) unstable; urgency=low * Clean up shlibs file. * Clean up changelog typo -- Al Stone Mon, 21 Nov 2005 21:27:32 -0700 libcoyotl (3.1.0-1) unstable; urgency=low * Upgraded to latest upstream. * Closes: bug#339200 -- library package needs to be renamed (libstdc++ allocator change) -- Al Stone Mon, 21 Nov 2005 15:55:19 -0700 libcoyotl (3.0.2-2) unstable; urgency=low * Was not adding in the right shlib links in libcoyotl-dev -- Al Stone Mon, 24 Oct 2005 21:32:36 -0600 libcoyotl (3.0.2-1) unstable; urgency=low * New upstream version: ABI was updated, documentation added * Update Debian standards version * Closes: bug#333976 -- Please undergo C++ 'c2' transition -- Al Stone Sun, 23 Oct 2005 14:48:25 -0600 libcoyotl (3.0.1-2) unstable; urgency=low * Remove unneeded dependence on g++ package that's in build-essential -- Al Stone Tue, 7 Dec 2004 21:41:47 -0700 libcoyotl (3.0.1-1) unstable; urgency=low * Initial Release. * Part of the set of packages that close bug#275425, the RFP/ITP for acovea * Added proper copyright text in test/test_prng.cpp -- Al Stone Fri, 22 Oct 2004 18:28:19 -0600 debian/compat0000664000000000000000000000000211775700262010375 0ustar 8 debian/copyright0000664000000000000000000000174711775700262011143 0ustar This package was debianized by Al Stone on Fri, 22 Oct 2004 18:28:19 -0600. It was downloaded from http://www.coyotegulch.com/products/acovea/ Copyright: 1992-2004 by Scott Robert Ladd Upstream Author: Scott Robert Ladd License: This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License with the Debian GNU/Linux distribution in file /usr/share/common-licenses/GPL-2; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA debian/source/0000775000000000000000000000000011775700262010477 5ustar debian/source/patch-header0000664000000000000000000000041511775700262012747 0ustar These patches contain all the Debian-specific changes mixed together. The changes that should be here are changes to the regenerated autoconf files created during the package build process, plus some minor source code changes to keep up to date with compiler changes. debian/source/format0000664000000000000000000000001411775700262011705 0ustar 3.0 (quilt) debian/README.Debian0000664000000000000000000000044511775700262011243 0ustar libcoyotl for Debian -------------------- It is true that there are extra license files for this package. This package can be dual-licensed, and the additional files indicate when the upstream author would use which license. -- Al Stone Sat, 26 Nov 2011 17:21:07 -0700 debian/shlibs0000664000000000000000000000004011775700262010400 0ustar libcoyotl-3.1 4 libcoyotl-3.1-4 debian/libcoyotl-3.1-4.dirs0000664000000000000000000000001011775700262012511 0ustar usr/lib debian/libcoyotl-dev.install0000664000000000000000000000061011775700262013340 0ustar debian/tmp/usr/include/* usr/include debian/tmp/usr/lib/lib*.a usr/lib debian/tmp/usr/lib/lib*.so usr/lib debian/tmp/usr/lib/*.la usr/lib test/test_maze usr/share/doc/libcoyotl-dev/test test/test_prng usr/share/doc/libcoyotl-dev/test debian/tmp/usr/share/doc/libcoyotl-dev/test/* usr/share/doc/libcoyotl-dev/test debian/tmp/usr/share/doc/libcoyotl-dev/html/* usr/share/doc/libcoyotl-dev/html debian/libcoyotl-dev.dirs0000664000000000000000000000012611775700262012635 0ustar usr/lib usr/include usr/share/doc/libcoyotl-dev/test usr/share/doc/libcoyotl-dev/html debian/libcoyotl-3.1-4.install0000664000000000000000000000007211775700262013226 0ustar debian/tmp/usr/lib/lib*.so.* usr/lib debian/shlibs DEBIAN debian/control0000664000000000000000000000512212264344256010603 0ustar Source: libcoyotl Section: libs Priority: optional Maintainer: Ubuntu Developers XSBC-Original-Maintainer: Al Stone Build-Depends: debhelper (>= 8.0.0), libpng-dev, doxygen, dh-autoreconf Standards-Version: 3.9.3 Package: libcoyotl-dev Section: libdevel Architecture: any Depends: libcoyotl-3.1-4 (= ${binary:Version}), ${misc:Depends} Description: portable C++ classes used by acovea -- development files This package provides the files needed to develop code that uses the libcoyotl library. . The classes provided here do not easily fit into a single category; in essence, these are tools that the author of the acovea package has found useful in a variety of applications. . Among the algorithms included: . - a polymorphic collection of the best pseudorandom number generators, including the Mersenne Twister and Marsaglia's favorites. . - utilities for working with real numbers, including additional functions for trigonometry, least common multiple, greatest common denominator, rounding, and other purposes. . - a simple cross-platform command-line parser. . - a framework for generating rectangular mazes. . - a template for fixed-point math based on different integer sizes and decimal point locations. . - templatized sorting utilities (designed before standard C++'s use of , but still useful). . - validation tools for "Design by Contract" programming. Package: libcoyotl-3.1-4 Section: libs Architecture: any Conflicts: libcoyotl3c2 Replaces: libcoyotl3c2 Depends: ${shlibs:Depends}, ${misc:Depends} Description: portable C++ classes used by acovea The classes provided here do not easily fit into a single category; in essence, these are tools that the author of the acovea package has found useful in a variety of applications. . Among the algorithms included: . - a polymorphic collection of the best pseudorandom number generators, including the Mersenne Twister and Marsaglia's favorites. . - utilities for working with real numbers, including additional functions for trigonometry, least common multiple, greatest common denominator, rounding, and other purposes. . - a simple cross-platform command-line parser. . - a framework for generating rectangular mazes. . - a template for fixed-point math based on different integer sizes and decimal point locations. . - templatized sorting utilities (designed before standard C++'s use of , but still useful). . - validation tools for "Design by Contract" programming. debian/docs0000664000000000000000000000007611775700262010055 0ustar AUTHORS NEWS README LICENSE.NON-FREE LICENSE.POLICY ChangeLog debian/dirs0000664000000000000000000000002611775700262010061 0ustar usr/lib usr/share/doc debian/patches/0000775000000000000000000000000011775701002010617 5ustar debian/patches/series0000664000000000000000000000004511775701002012033 0ustar update-includes.patch debian-changes debian/patches/update-includes.patch0000664000000000000000000000151011775700262014732 0ustar Index: libcoyotl/command_line.cpp =================================================================== --- libcoyotl.orig/libcoyotl/command_line.cpp 2011-11-26 15:54:43.000000000 -0700 +++ libcoyotl/libcoyotl/command_line.cpp 2011-11-26 17:00:50.000000000 -0700 @@ -31,6 +31,7 @@ // //----------------------------------------------------------------------- +#include #include "command_line.h" using namespace libcoyotl; Index: libcoyotl/sortutil.h =================================================================== --- libcoyotl.orig/libcoyotl/sortutil.h 2011-11-26 15:54:43.000000000 -0700 +++ libcoyotl/libcoyotl/sortutil.h 2011-11-26 17:01:34.000000000 -0700 @@ -36,6 +36,7 @@ #if !defined(LIBCOYOTL_SORTUTIL_H) #define LIBCOYOTL_SORTUTIL_H +#include #include namespace libcoyotl debian/patches/debian-changes0000664000000000000000001120654011775701002013403 0ustar These patches contain all the Debian-specific changes mixed together. The changes that should be here are changes to the regenerated autoconf files created during the package build process, plus some minor source code changes to keep up to date with compiler changes. --- libcoyotl-3.1.0.orig/missing +++ libcoyotl-3.1.0/missing @@ -1,10 +1,10 @@ #! /bin/sh # Common stub for a few missing GNU programs while installing. -scriptversion=2005-06-08.21 +scriptversion=2009-04-28.21; # UTC -# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005 -# Free Software Foundation, Inc. +# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006, +# 2008, 2009 Free Software Foundation, Inc. # Originally by Fran,cois Pinard , 1996. # This program is free software; you can redistribute it and/or modify @@ -18,9 +18,7 @@ scriptversion=2005-06-08.21 # GNU General Public License for more details. # You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA -# 02110-1301, USA. +# along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a @@ -33,6 +31,8 @@ if test $# -eq 0; then fi run=: +sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p' +sed_minuso='s/.* -o \([^ ]*\).*/\1/p' # In the cases where this matters, `missing' is being run in the # srcdir already. @@ -44,7 +44,7 @@ fi msg="missing on your system" -case "$1" in +case $1 in --run) # Try to run requested program, and just exit if it succeeds. run= @@ -77,6 +77,7 @@ Supported PROGRAM values: aclocal touch file \`aclocal.m4' autoconf touch file \`configure' autoheader touch file \`config.h.in' + autom4te touch the output file, or create a stub one automake touch all \`Makefile.in' files bison create \`y.tab.[ch]', if possible, from existing .[ch] flex create \`lex.yy.c', if possible, from existing .c @@ -86,6 +87,9 @@ Supported PROGRAM values: tar try tar, gnutar, gtar, then tar without non-portable flags yacc create \`y.tab.[ch]', if possible, from existing .[ch] +Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and +\`g' are ignored when checking the name. + Send bug reports to ." exit $? ;; @@ -103,15 +107,22 @@ Send bug reports to &2 "ERROR: \`tar' requires --run" exit 1 @@ -135,7 +146,7 @@ esac # If it does not exist, or fails to run (possibly an outdated version), # try to emulate it. -case "$1" in +case $program in aclocal*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if @@ -145,7 +156,7 @@ WARNING: \`$1' is $msg. You should only touch aclocal.m4 ;; - autoconf) + autoconf*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`${configure_ac}'. You might want to install the @@ -154,7 +165,7 @@ WARNING: \`$1' is $msg. You should only touch configure ;; - autoheader) + autoheader*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`acconfig.h' or \`${configure_ac}'. You might want @@ -164,7 +175,7 @@ WARNING: \`$1' is $msg. You should only test -z "$files" && files="config.h" touch_files= for f in $files; do - case "$f" in + case $f in *:*) touch_files="$touch_files "`echo "$f" | sed -e 's/^[^:]*://' -e 's/:.*//'`;; *) touch_files="$touch_files $f.in";; @@ -184,7 +195,7 @@ WARNING: \`$1' is $msg. You should only while read f; do touch "$f"; done ;; - autom4te) + autom4te*) echo 1>&2 "\ WARNING: \`$1' is needed, but is $msg. You might have modified some files without having the @@ -192,8 +203,8 @@ WARNING: \`$1' is needed, but is $msg. You can get \`$1' as part of \`Autoconf' from any GNU archive site." - file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'` - test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'` + file=`echo "$*" | sed -n "$sed_output"` + test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` if test -f "$file"; then touch $file else @@ -207,80 +218,78 @@ WARNING: \`$1' is needed, but is $msg. fi ;; - bison|yacc) + bison*|yacc*) echo 1>&2 "\ WARNING: \`$1' $msg. You should only need it if you modified a \`.y' file. You may need the \`Bison' package in order for those modifications to take effect. You can get \`Bison' from any GNU archive site." rm -f y.tab.c y.tab.h - if [ $# -ne 1 ]; then + if test $# -ne 1; then eval LASTARG="\${$#}" - case "$LASTARG" in + case $LASTARG in *.y) SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` - if [ -f "$SRCFILE" ]; then + if test -f "$SRCFILE"; then cp "$SRCFILE" y.tab.c fi SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` - if [ -f "$SRCFILE" ]; then + if test -f "$SRCFILE"; then cp "$SRCFILE" y.tab.h fi ;; esac fi - if [ ! -f y.tab.h ]; then + if test ! -f y.tab.h; then echo >y.tab.h fi - if [ ! -f y.tab.c ]; then + if test ! -f y.tab.c; then echo 'main() { return 0; }' >y.tab.c fi ;; - lex|flex) + lex*|flex*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a \`.l' file. You may need the \`Flex' package in order for those modifications to take effect. You can get \`Flex' from any GNU archive site." rm -f lex.yy.c - if [ $# -ne 1 ]; then + if test $# -ne 1; then eval LASTARG="\${$#}" - case "$LASTARG" in + case $LASTARG in *.l) SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` - if [ -f "$SRCFILE" ]; then + if test -f "$SRCFILE"; then cp "$SRCFILE" lex.yy.c fi ;; esac fi - if [ ! -f lex.yy.c ]; then + if test ! -f lex.yy.c; then echo 'main() { return 0; }' >lex.yy.c fi ;; - help2man) + help2man*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a dependency of a manual page. You may need the \`Help2man' package in order for those modifications to take effect. You can get \`Help2man' from any GNU archive site." - file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` - if test -z "$file"; then - file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'` - fi - if [ -f "$file" ]; then + file=`echo "$*" | sed -n "$sed_output"` + test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` + if test -f "$file"; then touch $file else test -z "$file" || exec >$file echo ".ab help2man is required to generate this page" - exit 1 + exit $? fi ;; - makeinfo) + makeinfo*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a \`.texi' or \`.texinfo' file, or any other file @@ -289,11 +298,17 @@ WARNING: \`$1' is $msg. You should only DU, IRIX). You might want to install the \`Texinfo' package or the \`GNU make' package. Grab either from any GNU archive site." # The file to touch is that specified with -o ... - file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` + file=`echo "$*" | sed -n "$sed_output"` + test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` if test -z "$file"; then # ... or it is the one specified with @setfilename ... infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` - file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile` + file=`sed -n ' + /^@setfilename/{ + s/.* \([^ ]*\) *$/\1/ + p + q + }' $infile` # ... or it is derived from the source name (dir/f.texi becomes f.info) test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info fi @@ -303,7 +318,7 @@ WARNING: \`$1' is $msg. You should only touch $file ;; - tar) + tar*) shift # We have already tried tar in the generic part. @@ -317,13 +332,13 @@ WARNING: \`$1' is $msg. You should only fi firstarg="$1" if shift; then - case "$firstarg" in + case $firstarg in *o*) firstarg=`echo "$firstarg" | sed s/o//` tar "$firstarg" "$@" && exit 0 ;; esac - case "$firstarg" in + case $firstarg in *h*) firstarg=`echo "$firstarg" | sed s/h//` tar "$firstarg" "$@" && exit 0 @@ -356,5 +371,6 @@ exit 0 # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-end: "$" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" # End: --- libcoyotl-3.1.0.orig/config.sub +++ libcoyotl-3.1.0/config.sub @@ -1,9 +1,10 @@ #! /bin/sh # Configuration validation subroutine script. # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, -# 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc. +# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, +# 2011, 2012 Free Software Foundation, Inc. -timestamp='2005-06-02' +timestamp='2012-04-18' # This file is (in principle) common to ALL GNU software. # The presence of a machine in this file suggests that SOME GNU software @@ -20,9 +21,7 @@ timestamp='2005-06-02' # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA -# 02110-1301, USA. +# along with this program; if not, see . # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a @@ -31,13 +30,16 @@ timestamp='2005-06-02' # Please send patches to . Submit a context -# diff and a properly formatted ChangeLog entry. +# diff and a properly formatted GNU ChangeLog entry. # # Configuration subroutine to validate and canonicalize a configuration type. # Supply the specified configuration type as an argument. # If it is invalid, we print an error message on stderr and exit with code 1. # Otherwise, we print the canonical config type on stdout and succeed. +# You can get the latest version of this script from: +# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD + # This file is supposed to be the same for all GNU packages # and recognize all the CPU types, system types and aliases # that are meaningful with *any* GNU software. @@ -71,7 +73,8 @@ Report bugs and patches to . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a @@ -86,12 +85,34 @@ if test "$depmode" = dashXmstdout; then depmode=dashmstdout fi +cygpath_u="cygpath -u -f -" +if test "$depmode" = msvcmsys; then + # This is just like msvisualcpp but w/o cygpath translation. + # Just convert the backslash-escaped backslashes to single forward + # slashes to satisfy depend.m4 + cygpath_u="sed s,\\\\\\\\,/,g" + depmode=msvisualcpp +fi + case "$depmode" in gcc3) ## gcc 3 implements dependency tracking that does exactly what ## we want. Yay! Note: for some reason libtool 1.4 doesn't like ## it if -MD -MP comes after the -MF stuff. Hmm. - "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" +## Unfortunately, FreeBSD c89 acceptance of flags depends upon +## the command line argument order; so add the flags where they +## appear in depend2.am. Note that the slowdown incurred here +## affects only configure: in makefiles, %FASTDEP% shortcuts this. + for arg + do + case $arg in + -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;; + *) set fnord "$@" "$arg" ;; + esac + shift # fnord + shift # $arg + done + "$@" stat=$? if test $stat -eq 0; then : else @@ -178,14 +199,14 @@ sgi) ' < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ tr ' -' ' ' >> $depfile - echo >> $depfile +' ' ' >> "$depfile" + echo >> "$depfile" # The second pass generates a dummy entry for each header file. tr ' ' ' ' < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ - >> $depfile + >> "$depfile" else # The sourcefile does not contain any dependencies, so just # store a dummy comment line, to avoid errors with the Makefile @@ -201,34 +222,39 @@ aix) # current directory. Also, the AIX compiler puts `$object:' at the # start of each line; $object doesn't have directory information. # Version 6 uses the directory in both cases. - stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'` - tmpdepfile="$stripped.u" + dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` + test "x$dir" = "x$object" && dir= + base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` if test "$libtool" = yes; then + tmpdepfile1=$dir$base.u + tmpdepfile2=$base.u + tmpdepfile3=$dir.libs/$base.u "$@" -Wc,-M else + tmpdepfile1=$dir$base.u + tmpdepfile2=$dir$base.u + tmpdepfile3=$dir$base.u "$@" -M fi stat=$? - if test -f "$tmpdepfile"; then : - else - stripped=`echo "$stripped" | sed 's,^.*/,,'` - tmpdepfile="$stripped.u" - fi - if test $stat -eq 0; then : else - rm -f "$tmpdepfile" + rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" exit $stat fi + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" + do + test -f "$tmpdepfile" && break + done if test -f "$tmpdepfile"; then - outname="$stripped.o" # Each line is of the form `foo.o: dependent.h'. # Do two passes, one to just change these to # `$object: dependent.h' and one to simply `dependent.h:'. - sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile" - sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile" + sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" + # That's a tab and a space in the []. + sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" else # The sourcefile does not contain any dependencies, so just # store a dummy comment line, to avoid errors with the Makefile @@ -276,6 +302,51 @@ icc) rm -f "$tmpdepfile" ;; +hp2) + # The "hp" stanza above does not work with aCC (C++) and HP's ia64 + # compilers, which have integrated preprocessors. The correct option + # to use with these is +Maked; it writes dependencies to a file named + # 'foo.d', which lands next to the object file, wherever that + # happens to be. + # Much of this is similar to the tru64 case; see comments there. + dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` + test "x$dir" = "x$object" && dir= + base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` + if test "$libtool" = yes; then + tmpdepfile1=$dir$base.d + tmpdepfile2=$dir.libs/$base.d + "$@" -Wc,+Maked + else + tmpdepfile1=$dir$base.d + tmpdepfile2=$dir$base.d + "$@" +Maked + fi + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile1" "$tmpdepfile2" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" + do + test -f "$tmpdepfile" && break + done + if test -f "$tmpdepfile"; then + sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile" + # Add `dependent.h:' lines. + sed -ne '2,${ + s/^ *// + s/ \\*$// + s/$/:/ + p + }' "$tmpdepfile" >> "$depfile" + else + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" "$tmpdepfile2" + ;; + tru64) # The Tru64 compiler uses -MD to generate dependencies as a side # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. @@ -288,13 +359,13 @@ tru64) if test "$libtool" = yes; then # With Tru64 cc, shared objects can also be used to make a - # static library. This mecanism is used in libtool 1.4 series to + # static library. This mechanism is used in libtool 1.4 series to # handle both shared and static libraries in a single compilation. # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d. # # With libtool 1.5 this exception was removed, and libtool now # generates 2 separate objects for the 2 libraries. These two - # compilations output dependencies in in $dir.libs/$base.o.d and + # compilations output dependencies in $dir.libs/$base.o.d and # in $dir$base.o.d. We have to check for both files, because # one of the two compilations can be disabled. We should prefer # $dir$base.o.d over $dir.libs/$base.o.d because the latter is @@ -345,7 +416,7 @@ dashmstdout) # Remove the call to Libtool. if test "$libtool" = yes; then - while test $1 != '--mode=compile'; do + while test "X$1" != 'X--mode=compile'; do shift done shift @@ -396,32 +467,39 @@ makedepend) "$@" || exit $? # Remove any Libtool call if test "$libtool" = yes; then - while test $1 != '--mode=compile'; do + while test "X$1" != 'X--mode=compile'; do shift done shift fi # X makedepend shift - cleared=no - for arg in "$@"; do + cleared=no eat=no + for arg + do case $cleared in no) set ""; shift cleared=yes ;; esac + if test $eat = yes; then + eat=no + continue + fi case "$arg" in -D*|-I*) set fnord "$@" "$arg"; shift ;; # Strip any option that makedepend may not understand. Remove # the object too, otherwise makedepend will parse it as a source file. + -arch) + eat=yes ;; -*|$object) ;; *) set fnord "$@" "$arg"; shift ;; esac done - obj_suffix="`echo $object | sed 's/^.*\././'`" + obj_suffix=`echo "$object" | sed 's/^.*\././'` touch "$tmpdepfile" ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" rm -f "$depfile" @@ -441,7 +519,7 @@ cpp) # Remove the call to Libtool. if test "$libtool" = yes; then - while test $1 != '--mode=compile'; do + while test "X$1" != 'X--mode=compile'; do shift done shift @@ -479,13 +557,27 @@ cpp) msvisualcpp) # Important note: in order to support this mode, a compiler *must* - # always write the preprocessed file to stdout, regardless of -o, - # because we must use -o when running libtool. + # always write the preprocessed file to stdout. "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + IFS=" " for arg do case "$arg" in + -o) + shift + ;; + $object) + shift + ;; "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") set fnord "$@" shift @@ -498,16 +590,23 @@ msvisualcpp) ;; esac done - "$@" -E | - sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile" + "$@" -E 2>/dev/null | + sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" - . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" + sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" echo " " >> "$depfile" - . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile" + sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile" rm -f "$tmpdepfile" ;; +msvcmsys) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + none) exec "$@" ;; @@ -526,5 +625,6 @@ exit 0 # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-end: "$" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" # End: --- libcoyotl-3.1.0.orig/install-sh +++ libcoyotl-3.1.0/install-sh @@ -1,7 +1,7 @@ #!/bin/sh # install - install a program, script, or datafile -scriptversion=2005-05-14.22 +scriptversion=2009-04-28.21; # UTC # This originates from X11R5 (mit/util/scripts/install.sh), which was # later released in X11R6 (xc/config/util/install.sh) with the @@ -39,38 +39,68 @@ scriptversion=2005-05-14.22 # when there is no Makefile. # # This script is compatible with the BSD install script, but was written -# from scratch. It can only install one file at a time, a restriction -# shared with many OS's install programs. +# from scratch. + +nl=' +' +IFS=" "" $nl" # set DOITPROG to echo to test this script # Don't use :- since 4.3BSD and earlier shells don't like it. -doit="${DOITPROG-}" +doit=${DOITPROG-} +if test -z "$doit"; then + doit_exec=exec +else + doit_exec=$doit +fi -# put in absolute paths if you don't have them in your path; or use env. vars. +# Put in absolute file names if you don't have them in your path; +# or use environment vars. -mvprog="${MVPROG-mv}" -cpprog="${CPPROG-cp}" -chmodprog="${CHMODPROG-chmod}" -chownprog="${CHOWNPROG-chown}" -chgrpprog="${CHGRPPROG-chgrp}" -stripprog="${STRIPPROG-strip}" -rmprog="${RMPROG-rm}" -mkdirprog="${MKDIRPROG-mkdir}" +chgrpprog=${CHGRPPROG-chgrp} +chmodprog=${CHMODPROG-chmod} +chownprog=${CHOWNPROG-chown} +cmpprog=${CMPPROG-cmp} +cpprog=${CPPROG-cp} +mkdirprog=${MKDIRPROG-mkdir} +mvprog=${MVPROG-mv} +rmprog=${RMPROG-rm} +stripprog=${STRIPPROG-strip} + +posix_glob='?' +initialize_posix_glob=' + test "$posix_glob" != "?" || { + if (set -f) 2>/dev/null; then + posix_glob= + else + posix_glob=: + fi + } +' + +posix_mkdir= + +# Desired mode of installed file. +mode=0755 -chmodcmd="$chmodprog 0755" -chowncmd= chgrpcmd= -stripcmd= +chmodcmd=$chmodprog +chowncmd= +mvcmd=$mvprog rmcmd="$rmprog -f" -mvcmd="$mvprog" +stripcmd= + src= dst= dir_arg= -dstarg= +dst_arg= + +copy_on_change=false no_target_directory= -usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE +usage="\ +Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE or: $0 [OPTION]... SRCFILES... DIRECTORY or: $0 [OPTION]... -t DIRECTORY SRCFILES... or: $0 [OPTION]... -d DIRECTORIES... @@ -80,81 +110,86 @@ In the 2nd and 3rd, copy all SRCFILES to In the 4th, create DIRECTORIES. Options: --c (ignored) --d create directories instead of installing files. --g GROUP $chgrpprog installed files to GROUP. --m MODE $chmodprog installed files to MODE. --o USER $chownprog installed files to USER. --s $stripprog installed files. --t DIRECTORY install into DIRECTORY. --T report an error if DSTFILE is a directory. ---help display this help and exit. ---version display version info and exit. + --help display this help and exit. + --version display version info and exit. + + -c (ignored) + -C install only if different (preserve the last data modification time) + -d create directories instead of installing files. + -g GROUP $chgrpprog installed files to GROUP. + -m MODE $chmodprog installed files to MODE. + -o USER $chownprog installed files to USER. + -s $stripprog installed files. + -t DIRECTORY install into DIRECTORY. + -T report an error if DSTFILE is a directory. Environment variables override the default commands: - CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG + CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG + RMPROG STRIPPROG " -while test -n "$1"; do +while test $# -ne 0; do case $1 in - -c) shift - continue;; + -c) ;; - -d) dir_arg=true - shift - continue;; + -C) copy_on_change=true;; + + -d) dir_arg=true;; -g) chgrpcmd="$chgrpprog $2" - shift - shift - continue;; + shift;; --help) echo "$usage"; exit $?;; - -m) chmodcmd="$chmodprog $2" - shift - shift - continue;; + -m) mode=$2 + case $mode in + *' '* | *' '* | *' +'* | *'*'* | *'?'* | *'['*) + echo "$0: invalid mode: $mode" >&2 + exit 1;; + esac + shift;; -o) chowncmd="$chownprog $2" - shift - shift - continue;; - - -s) stripcmd=$stripprog - shift - continue;; - - -t) dstarg=$2 - shift - shift - continue;; - - -T) no_target_directory=true - shift - continue;; + shift;; + + -s) stripcmd=$stripprog;; + + -t) dst_arg=$2 + shift;; + + -T) no_target_directory=true;; --version) echo "$0 $scriptversion"; exit $?;; - *) # When -d is used, all remaining arguments are directories to create. - # When -t is used, the destination is already specified. - test -n "$dir_arg$dstarg" && break - # Otherwise, the last argument is the destination. Remove it from $@. - for arg - do - if test -n "$dstarg"; then - # $@ is not empty: it contains at least $arg. - set fnord "$@" "$dstarg" - shift # fnord - fi - shift # arg - dstarg=$arg - done + --) shift break;; + + -*) echo "$0: invalid option: $1" >&2 + exit 1;; + + *) break;; esac + shift done -if test -z "$1"; then +if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then + # When -d is used, all remaining arguments are directories to create. + # When -t is used, the destination is already specified. + # Otherwise, the last argument is the destination. Remove it from $@. + for arg + do + if test -n "$dst_arg"; then + # $@ is not empty: it contains at least $arg. + set fnord "$@" "$dst_arg" + shift # fnord + fi + shift # arg + dst_arg=$arg + done +fi + +if test $# -eq 0; then if test -z "$dir_arg"; then echo "$0: no input file specified." >&2 exit 1 @@ -164,24 +199,47 @@ if test -z "$1"; then exit 0 fi +if test -z "$dir_arg"; then + trap '(exit $?); exit' 1 2 13 15 + + # Set umask so as not to create temps with too-generous modes. + # However, 'strip' requires both read and write access to temps. + case $mode in + # Optimize common cases. + *644) cp_umask=133;; + *755) cp_umask=22;; + + *[0-7]) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw='% 200' + fi + cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; + *) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw=,u+rw + fi + cp_umask=$mode$u_plus_rw;; + esac +fi + for src do # Protect names starting with `-'. case $src in - -*) src=./$src ;; + -*) src=./$src;; esac if test -n "$dir_arg"; then dst=$src - src= - - if test -d "$dst"; then - mkdircmd=: - chmodcmd= - else - mkdircmd=$mkdirprog - fi + dstdir=$dst + test -d "$dstdir" + dstdir_status=$? else + # Waiting for this to be detected by the "$cpprog $src $dsttmp" command # might cause directories to be created, which would be especially bad # if $src (and thus $dsttmp) contains '*'. @@ -190,71 +248,199 @@ do exit 1 fi - if test -z "$dstarg"; then + if test -z "$dst_arg"; then echo "$0: no destination specified." >&2 exit 1 fi - dst=$dstarg + dst=$dst_arg # Protect names starting with `-'. case $dst in - -*) dst=./$dst ;; + -*) dst=./$dst;; esac # If destination is a directory, append the input filename; won't work # if double slashes aren't ignored. if test -d "$dst"; then if test -n "$no_target_directory"; then - echo "$0: $dstarg: Is a directory" >&2 + echo "$0: $dst_arg: Is a directory" >&2 exit 1 fi - dst=$dst/`basename "$src"` + dstdir=$dst + dst=$dstdir/`basename "$src"` + dstdir_status=0 + else + # Prefer dirname, but fall back on a substitute if dirname fails. + dstdir=` + (dirname "$dst") 2>/dev/null || + expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$dst" : 'X\(//\)[^/]' \| \ + X"$dst" : 'X\(//\)$' \| \ + X"$dst" : 'X\(/\)' \| . 2>/dev/null || + echo X"$dst" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q' + ` + + test -d "$dstdir" + dstdir_status=$? fi fi - # This sed command emulates the dirname command. - dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'` - - # Make sure that the destination directory exists. + obsolete_mkdir_used=false - # Skip lots of stat calls in the usual case. - if test ! -d "$dstdir"; then - defaultIFS=' - ' - IFS="${IFS-$defaultIFS}" - - oIFS=$IFS - # Some sh's can't handle IFS=/ for some reason. - IFS='%' - set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'` - shift - IFS=$oIFS + if test $dstdir_status != 0; then + case $posix_mkdir in + '') + # Create intermediate dirs using mode 755 as modified by the umask. + # This is like FreeBSD 'install' as of 1997-10-28. + umask=`umask` + case $stripcmd.$umask in + # Optimize common cases. + *[2367][2367]) mkdir_umask=$umask;; + .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; + + *[0-7]) + mkdir_umask=`expr $umask + 22 \ + - $umask % 100 % 40 + $umask % 20 \ + - $umask % 10 % 4 + $umask % 2 + `;; + *) mkdir_umask=$umask,go-w;; + esac + + # With -d, create the new directory with the user-specified mode. + # Otherwise, rely on $mkdir_umask. + if test -n "$dir_arg"; then + mkdir_mode=-m$mode + else + mkdir_mode= + fi + + posix_mkdir=false + case $umask in + *[123567][0-7][0-7]) + # POSIX mkdir -p sets u+wx bits regardless of umask, which + # is incompatible with FreeBSD 'install' when (umask & 300) != 0. + ;; + *) + tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ + trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 + + if (umask $mkdir_umask && + exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 + then + if test -z "$dir_arg" || { + # Check for POSIX incompatibilities with -m. + # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or + # other-writeable bit of parent directory when it shouldn't. + # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. + ls_ld_tmpdir=`ls -ld "$tmpdir"` + case $ls_ld_tmpdir in + d????-?r-*) different_mode=700;; + d????-?--*) different_mode=755;; + *) false;; + esac && + $mkdirprog -m$different_mode -p -- "$tmpdir" && { + ls_ld_tmpdir_1=`ls -ld "$tmpdir"` + test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" + } + } + then posix_mkdir=: + fi + rmdir "$tmpdir/d" "$tmpdir" + else + # Remove any dirs left behind by ancient mkdir implementations. + rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null + fi + trap '' 0;; + esac;; + esac - pathcomp= + if + $posix_mkdir && ( + umask $mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" + ) + then : + else - while test $# -ne 0 ; do - pathcomp=$pathcomp$1 + # The umask is ridiculous, or mkdir does not conform to POSIX, + # or it failed possibly due to a race condition. Create the + # directory the slow way, step by step, checking for races as we go. + + case $dstdir in + /*) prefix='/';; + -*) prefix='./';; + *) prefix='';; + esac + + eval "$initialize_posix_glob" + + oIFS=$IFS + IFS=/ + $posix_glob set -f + set fnord $dstdir shift - if test ! -d "$pathcomp"; then - $mkdirprog "$pathcomp" - # mkdir can fail with a `File exist' error in case several - # install-sh are creating the directory concurrently. This - # is OK. - test -d "$pathcomp" || exit + $posix_glob set +f + IFS=$oIFS + + prefixes= + + for d + do + test -z "$d" && continue + + prefix=$prefix$d + if test -d "$prefix"; then + prefixes= + else + if $posix_mkdir; then + (umask=$mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break + # Don't fail if two instances are running concurrently. + test -d "$prefix" || exit 1 + else + case $prefix in + *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; + *) qprefix=$prefix;; + esac + prefixes="$prefixes '$qprefix'" + fi + fi + prefix=$prefix/ + done + + if test -n "$prefixes"; then + # Don't fail if two instances are running concurrently. + (umask $mkdir_umask && + eval "\$doit_exec \$mkdirprog $prefixes") || + test -d "$dstdir" || exit 1 + obsolete_mkdir_used=true fi - pathcomp=$pathcomp/ - done + fi fi if test -n "$dir_arg"; then - $doit $mkdircmd "$dst" \ - && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \ - && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \ - && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \ - && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; } - + { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && + { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && + { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || + test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 else - dstfile=`basename "$dst"` # Make a couple of temp file names in the proper directory. dsttmp=$dstdir/_inst.$$_ @@ -262,10 +448,9 @@ do # Trap to clean up those temp files at exit. trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 - trap '(exit $?); exit' 1 2 13 15 # Copy the file name to the temp name. - $doit $cpprog "$src" "$dsttmp" && + (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && # and set any options; do chmod last to preserve setuid bits. # @@ -273,51 +458,63 @@ do # ignore errors from any of these, just make sure not to ignore # errors from the above "$doit $cpprog $src $dsttmp" command. # - { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \ - && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \ - && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \ - && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } && - - # Now rename the file to the real destination. - { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \ - || { - # The rename failed, perhaps because mv can't rename something else - # to itself, or perhaps because mv is so ancient that it does not - # support -f. - - # Now remove or move aside any old file at destination location. - # We try this two ways since rm can't unlink itself on some - # systems and the destination file might be busy for other - # reasons. In this case, the final cleanup might fail but the new - # file should still install successfully. - { - if test -f "$dstdir/$dstfile"; then - $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \ - || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \ - || { - echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2 - (exit 1); exit 1 - } - else - : - fi - } && - - # Now rename the file to the real destination. - $doit $mvcmd "$dsttmp" "$dstdir/$dstfile" - } - } - fi || { (exit 1); exit 1; } -done + { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && + { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && + { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && + { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && + + # If -C, don't bother to copy if it wouldn't change the file. + if $copy_on_change && + old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && + new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && + + eval "$initialize_posix_glob" && + $posix_glob set -f && + set X $old && old=:$2:$4:$5:$6 && + set X $new && new=:$2:$4:$5:$6 && + $posix_glob set +f && + + test "$old" = "$new" && + $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 + then + rm -f "$dsttmp" + else + # Rename the file to the real destination. + $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || -# The final little trick to "correctly" pass the exit status to the exit trap. -{ - (exit 0); exit 0 -} + # The rename failed, perhaps because mv can't rename something else + # to itself, or perhaps because mv is so ancient that it does not + # support -f. + { + # Now remove or move aside any old file at destination location. + # We try this two ways since rm can't unlink itself on some + # systems and the destination file might be busy for other + # reasons. In this case, the final cleanup might fail but the new + # file should still install successfully. + { + test ! -f "$dst" || + $doit $rmcmd -f "$dst" 2>/dev/null || + { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && + { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } + } || + { echo "$0: cannot unlink or rename $dst" >&2 + (exit 1); exit 1 + } + } && + + # Now rename the file to the real destination. + $doit $mvcmd "$dsttmp" "$dst" + } + fi || exit 1 + + trap '' 0 + fi +done # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-end: "$" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" # End: --- libcoyotl-3.1.0.orig/ltmain.sh +++ libcoyotl-3.1.0/ltmain.sh @@ -1,30 +1,130 @@ -# ltmain.sh - Provide generalized library-building support services. -# NOTE: Changing this file will not affect anything until you rerun configure. -# -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005 -# Free Software Foundation, Inc. -# Originally by Gordon Matzigkeit , 1996 -# -# This program is free software; you can redistribute it and/or modify + +# libtool (GNU libtool) 2.4.2 +# Written by Gordon Matzigkeit , 1996 + +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, +# 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc. +# This is free software; see the source for copying conditions. There is NO +# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + +# GNU Libtool is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # -# This program is distributed in the hope that it will be useful, but +# As a special exception to the GNU General Public License, +# if you distribute this file as part of a program or library that +# is built using GNU Libtool, you may include this file under the +# same distribution terms that you use for the rest of that program. +# +# GNU Libtool is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +# along with GNU Libtool; see the file COPYING. If not, a copy +# can be downloaded from http://www.gnu.org/licenses/gpl.html, +# or obtained by writing to the Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + +# Usage: $progname [OPTION]... [MODE-ARG]... +# +# Provide generalized library-building support services. # -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. +# --config show all configuration variables +# --debug enable verbose shell tracing +# -n, --dry-run display commands without modifying any files +# --features display basic configuration information and exit +# --mode=MODE use operation mode MODE +# --preserve-dup-deps don't remove duplicate dependency libraries +# --quiet, --silent don't print informational messages +# --no-quiet, --no-silent +# print informational messages (default) +# --no-warn don't display warning messages +# --tag=TAG use configuration variables from tag TAG +# -v, --verbose print more informational messages than default +# --no-verbose don't print the extra informational messages +# --version print version information +# -h, --help, --help-all print short, long, or detailed help message +# +# MODE must be one of the following: +# +# clean remove files from the build directory +# compile compile a source file into a libtool object +# execute automatically set library path, then run a program +# finish complete the installation of libtool libraries +# install install libraries or executables +# link create a library or an executable +# uninstall remove libraries from an installed directory +# +# MODE-ARGS vary depending on the MODE. When passed as first option, +# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that. +# Try `$progname --help --mode=MODE' for a more detailed description of MODE. +# +# When reporting a bug, please describe a test case to reproduce it and +# include the following information: +# +# host-triplet: $host +# shell: $SHELL +# compiler: $LTCC +# compiler flags: $LTCFLAGS +# linker: $LD (gnu? $with_gnu_ld) +# $progname: (GNU libtool) 2.4.2 Debian-2.4.2-1 +# automake: $automake_version +# autoconf: $autoconf_version +# +# Report bugs to . +# GNU libtool home page: . +# General help using GNU software: . + +PROGRAM=libtool +PACKAGE=libtool +VERSION="2.4.2 Debian-2.4.2-1" +TIMESTAMP="" +package_revision=1.3337 + +# Be Bourne compatible +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac +fi +BIN_SH=xpg4; export BIN_SH # for Tru64 +DUALCASE=1; export DUALCASE # for MKS sh + +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +$1 +_LTECHO_EOF' +} + +# NLS nuisances: We save the old values to restore during execute mode. +lt_user_locale= +lt_safe_locale= +for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES +do + eval "if test \"\${$lt_var+set}\" = set; then + save_$lt_var=\$$lt_var + $lt_var=C + export $lt_var + lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\" + lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\" + fi" +done +LC_ALL=C +LANGUAGE=C +export LANGUAGE LC_ALL + +$lt_unset CDPATH -basename="s,^.*/,,g" # Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh # is ksh but when the shell is invoked as "sh" and the current value of @@ -33,4507 +133,3327 @@ basename="s,^.*/,,g" # function. progpath="$0" -# define SED for historic ltconfig's generated by Libtool 1.3 -test -z "$SED" && SED=sed -# The name of this program: -progname=`echo "$progpath" | $SED $basename` -modename="$progname" + +: ${CP="cp -f"} +test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'} +: ${MAKE="make"} +: ${MKDIR="mkdir"} +: ${MV="mv -f"} +: ${RM="rm -f"} +: ${SHELL="${CONFIG_SHELL-/bin/sh}"} +: ${Xsed="$SED -e 1s/^X//"} # Global variables: EXIT_SUCCESS=0 EXIT_FAILURE=1 +EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing. +EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake. -PROGRAM=ltmain.sh -PACKAGE=libtool -VERSION=1.5.20 -TIMESTAMP=" (1.1220.2.287 2005/08/31 18:54:15)" - -# See if we are running on zsh, and set the options which allow our -# commands through without removal of \ escapes. -if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST -fi -# Same for EGREP, and just to be sure, do LTCC as well -if test "X$EGREP" = X ; then - EGREP=egrep -fi -if test "X$LTCC" = X ; then - LTCC=${CC-gcc} -fi +exit_status=$EXIT_SUCCESS -# Check that we have a working $echo. -if test "X$1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift -elif test "X$1" = X--fallback-echo; then - # Avoid inline document here, it may be left over - : -elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then - # Yippee, $echo works! - : -else - # Restart under the correct shell, and then maybe $echo will work. - exec $SHELL "$progpath" --no-reexec ${1+"$@"} -fi +# Make sure IFS has a sensible default +lt_nl=' +' +IFS=" $lt_nl" -if test "X$1" = X--fallback-echo; then - # used as fallback echo - shift - cat <&2 - $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 - exit $EXIT_FAILURE -fi +# func_dirname_and_basename file append nondir_replacement +# perform func_basename and func_dirname in a single function +# call: +# dirname: Compute the dirname of FILE. If nonempty, +# add APPEND to the result, otherwise set result +# to NONDIR_REPLACEMENT. +# value returned in "$func_dirname_result" +# basename: Compute filename of FILE. +# value retuned in "$func_basename_result" +# Implementation must be kept synchronized with func_dirname +# and func_basename. For efficiency, we do not delegate to +# those functions but instead duplicate the functionality here. +func_dirname_and_basename () +{ + # Extract subdirectory from the argument. + func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"` + if test "X$func_dirname_result" = "X${1}"; then + func_dirname_result="${3}" + else + func_dirname_result="$func_dirname_result${2}" + fi + func_basename_result=`$ECHO "${1}" | $SED -e "$basename"` +} # func_dirname_and_basename may be replaced by extended shell implementation -# Global variables. -mode=$default_mode -nonopt= -prev= -prevopt= -run= -show="$echo" -show_help= -execute_dlfiles= -lo2o="s/\\.lo\$/.${objext}/" -o2lo="s/\\.${objext}\$/.lo/" -if test -z "$max_cmd_len"; then - i=0 - testring="ABCD" - new_result= - - # If test is not a shell built-in, we'll probably end up computing a - # maximum length that is only half of the actual maximum length, but - # we can't tell. - while (test "X"`$SHELL $0 --fallback-echo "X$testring" 2>/dev/null` \ - = "XX$testring") >/dev/null 2>&1 && - new_result=`expr "X$testring" : ".*" 2>&1` && - max_cmd_len="$new_result" && - test "$i" != 17 # 1/2 MB should be enough - do - i=`expr $i + 1` - testring="$testring$testring" - done - testring= - # Add a significant safety factor because C++ compilers can tack on massive - # amounts of additional arguments before passing them to the linker. - # It appears as though 1/2 is a usable value. - max_cmd_len=`expr $max_cmd_len \/ 2` -fi +# func_stripname prefix suffix name +# strip PREFIX and SUFFIX off of NAME. +# PREFIX and SUFFIX must not contain globbing or regex special +# characters, hashes, percent signs, but SUFFIX may contain a leading +# dot (in which case that matches only a dot). +# func_strip_suffix prefix name +func_stripname () +{ + case ${2} in + .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; + *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; + esac +} # func_stripname may be replaced by extended shell implementation -##################################### -# Shell function definitions: -# This seems to be the best place for them -# func_win32_libid arg -# return the library type of file 'arg' -# -# Need a lot of goo to handle *both* DLLs and import libs -# Has to be a shell function in order to 'eat' the argument -# that is supplied when $file_magic_command is called. -func_win32_libid () +# These SED scripts presuppose an absolute path with a trailing slash. +pathcar='s,^/\([^/]*\).*$,\1,' +pathcdr='s,^/[^/]*,,' +removedotparts=':dotsl + s@/\./@/@g + t dotsl + s,/\.$,/,' +collapseslashes='s@/\{1,\}@/@g' +finalslash='s,/*$,/,' + +# func_normal_abspath PATH +# Remove doubled-up and trailing slashes, "." path components, +# and cancel out any ".." path components in PATH after making +# it an absolute path. +# value returned in "$func_normal_abspath_result" +func_normal_abspath () { - win32_libid_type="unknown" - win32_fileres=`file -L $1 2>/dev/null` - case $win32_fileres in - *ar\ archive\ import\ library*) # definitely import - win32_libid_type="x86 archive import" + # Start from root dir and reassemble the path. + func_normal_abspath_result= + func_normal_abspath_tpath=$1 + func_normal_abspath_altnamespace= + case $func_normal_abspath_tpath in + "") + # Empty path, that just means $cwd. + func_stripname '' '/' "`pwd`" + func_normal_abspath_result=$func_stripname_result + return ;; - *ar\ archive*) # could be an import, or static - if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \ - $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then - win32_nmres=`eval $NM -f posix -A $1 | \ - sed -n -e '1,100{/ I /{x;/import/!{s/^/import/;h;p;};x;};}'` - if test "X$win32_nmres" = "Ximport" ; then - win32_libid_type="x86 archive import" - else - win32_libid_type="x86 archive static" - fi - fi + # The next three entries are used to spot a run of precisely + # two leading slashes without using negated character classes; + # we take advantage of case's first-match behaviour. + ///*) + # Unusual form of absolute path, do nothing. ;; - *DLL*) - win32_libid_type="x86 DLL" + //*) + # Not necessarily an ordinary path; POSIX reserves leading '//' + # and for example Cygwin uses it to access remote file shares + # over CIFS/SMB, so we conserve a leading double slash if found. + func_normal_abspath_altnamespace=/ ;; - *executable*) # but shell scripts are "executable" too... - case $win32_fileres in - *MS\ Windows\ PE\ Intel*) - win32_libid_type="x86 DLL" - ;; - esac + /*) + # Absolute path, do nothing. + ;; + *) + # Relative path, prepend $cwd. + func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath ;; esac - $echo $win32_libid_type + # Cancel out all the simple stuff to save iterations. We also want + # the path to end with a slash for ease of parsing, so make sure + # there is one (and only one) here. + func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ + -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"` + while :; do + # Processed it all yet? + if test "$func_normal_abspath_tpath" = / ; then + # If we ascended to the root using ".." the result may be empty now. + if test -z "$func_normal_abspath_result" ; then + func_normal_abspath_result=/ + fi + break + fi + func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \ + -e "$pathcar"` + func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ + -e "$pathcdr"` + # Figure out what to do with it + case $func_normal_abspath_tcomponent in + "") + # Trailing empty path component, ignore it. + ;; + ..) + # Parent dir; strip last assembled component from result. + func_dirname "$func_normal_abspath_result" + func_normal_abspath_result=$func_dirname_result + ;; + *) + # Actual path component, append it. + func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent + ;; + esac + done + # Restore leading double-slash if one was found on entry. + func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result } - -# func_infer_tag arg -# Infer tagged configuration to use if any are available and -# if one wasn't chosen via the "--tag" command line option. -# Only attempt this if the compiler in the base compile -# command doesn't match the default compiler. -# arg is usually of the form 'gcc ...' -func_infer_tag () +# func_relative_path SRCDIR DSTDIR +# generates a relative path from SRCDIR to DSTDIR, with a trailing +# slash if non-empty, suitable for immediately appending a filename +# without needing to append a separator. +# value returned in "$func_relative_path_result" +func_relative_path () { - if test -n "$available_tags" && test -z "$tagname"; then - CC_quoted= - for arg in $CC; do - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - CC_quoted="$CC_quoted $arg" - done - case $@ in - # Blanks in the command may have been stripped by the calling shell, - # but not from the CC environment variable when configure was run. - " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;; - # Blanks at the start of $base_compile will cause this to fail - # if we don't check for them as well. + func_relative_path_result= + func_normal_abspath "$1" + func_relative_path_tlibdir=$func_normal_abspath_result + func_normal_abspath "$2" + func_relative_path_tbindir=$func_normal_abspath_result + + # Ascend the tree starting from libdir + while :; do + # check if we have found a prefix of bindir + case $func_relative_path_tbindir in + $func_relative_path_tlibdir) + # found an exact match + func_relative_path_tcancelled= + break + ;; + $func_relative_path_tlibdir*) + # found a matching prefix + func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir" + func_relative_path_tcancelled=$func_stripname_result + if test -z "$func_relative_path_result"; then + func_relative_path_result=. + fi + break + ;; *) - for z in $available_tags; do - if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then - # Evaluate the configuration. - eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" - CC_quoted= - for arg in $CC; do - # Double-quote args containing other shell metacharacters. - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - CC_quoted="$CC_quoted $arg" - done - # user sometimes does CC=-gcc so we need to match that to 'gcc' - trimedcc=`echo ${CC} | $SED -e "s/${host}-//g"` - # and sometimes libtool has CC=-gcc but user does CC=gcc - extendcc=${host}-${CC} - # and sometimes libtool has CC=-gcc but user has CC=-gcc - # (Gentoo-specific hack because we always export $CHOST) - mungedcc=${CHOST-${host}}-${trimedcc} - case "$@ " in - "cc "* | " cc "* | "${host}-cc "* | " ${host}-cc "*|\ - "gcc "* | " gcc "* | "${host}-gcc "* | " ${host}-gcc "*) - tagname=CC - break ;; - "$trimedcc "* | " $trimedcc "* | "`$echo $trimedcc` "* | " `$echo $trimedcc` "*|\ - "$extendcc "* | " $extendcc "* | "`$echo $extendcc` "* | " `$echo $extendcc` "*|\ - "$mungedcc "* | " $mungedcc "* | "`$echo $mungedcc` "* | " `$echo $mungedcc` "*|\ - " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) - # The compiler in the base compile command matches - # the one in the tagged configuration. - # Assume this is the tagged configuration we want. - tagname=$z - break - ;; - esac - fi - done - # If $tagname still isn't set, then no tagged configuration - # was found and let the user know that the "--tag" command - # line option must be used. - if test -z "$tagname"; then - $echo "$modename: unable to infer tagged configuration" - $echo "$modename: specify a tag with \`--tag'" 1>&2 - exit $EXIT_FAILURE -# else -# $echo "$modename: using $tagname tagged configuration" - fi - ;; - esac - fi + func_dirname $func_relative_path_tlibdir + func_relative_path_tlibdir=${func_dirname_result} + if test "x$func_relative_path_tlibdir" = x ; then + # Have to descend all the way to the root! + func_relative_path_result=../$func_relative_path_result + func_relative_path_tcancelled=$func_relative_path_tbindir + break + fi + func_relative_path_result=../$func_relative_path_result + ;; + esac + done + + # Now calculate path; take care to avoid doubling-up slashes. + func_stripname '' '/' "$func_relative_path_result" + func_relative_path_result=$func_stripname_result + func_stripname '/' '/' "$func_relative_path_tcancelled" + if test "x$func_stripname_result" != x ; then + func_relative_path_result=${func_relative_path_result}/${func_stripname_result} + fi + + # Normalisation. If bindir is libdir, return empty string, + # else relative path ending with a slash; either way, target + # file name can be directly appended. + if test ! -z "$func_relative_path_result"; then + func_stripname './' '' "$func_relative_path_result/" + func_relative_path_result=$func_stripname_result + fi } +# The name of this program: +func_dirname_and_basename "$progpath" +progname=$func_basename_result -# func_extract_an_archive dir oldlib -func_extract_an_archive () +# Make sure we have an absolute path for reexecution: +case $progpath in + [\\/]*|[A-Za-z]:\\*) ;; + *[\\/]*) + progdir=$func_dirname_result + progdir=`cd "$progdir" && pwd` + progpath="$progdir/$progname" + ;; + *) + save_IFS="$IFS" + IFS=${PATH_SEPARATOR-:} + for progdir in $PATH; do + IFS="$save_IFS" + test -x "$progdir/$progname" && break + done + IFS="$save_IFS" + test -n "$progdir" || progdir=`pwd` + progpath="$progdir/$progname" + ;; +esac + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed="${SED}"' -e 1s/^X//' +sed_quote_subst='s/\([`"$\\]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\(["`\\]\)/\\\1/g' + +# Sed substitution that turns a string into a regex matching for the +# string literally. +sed_make_literal_regex='s,[].[^$\\*\/],\\&,g' + +# Sed substitution that converts a w32 file name or path +# which contains forward slashes, into one that contains +# (escaped) backslashes. A very naive implementation. +lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' + +# Re-`\' parameter expansions in output of double_quote_subst that were +# `\'-ed in input to the same. If an odd number of `\' preceded a '$' +# in input to double_quote_subst, that '$' was protected from expansion. +# Since each input `\' is now two `\'s, look for any number of runs of +# four `\'s followed by two `\'s and then a '$'. `\' that '$'. +bs='\\' +bs2='\\\\' +bs4='\\\\\\\\' +dollar='\$' +sed_double_backslash="\ + s/$bs4/&\\ +/g + s/^$bs2$dollar/$bs&/ + s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g + s/\n//g" + +# Standard options: +opt_dry_run=false +opt_help=false +opt_quiet=false +opt_verbose=false +opt_warning=: + +# func_echo arg... +# Echo program name prefixed message, along with the current mode +# name if it has been set yet. +func_echo () { - f_ex_an_ar_dir="$1"; shift - f_ex_an_ar_oldlib="$1" + $ECHO "$progname: ${opt_mode+$opt_mode: }$*" +} - $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)" - $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $? - if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then - : - else - $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2 - exit $EXIT_FAILURE - fi +# func_verbose arg... +# Echo program name prefixed message in verbose mode only. +func_verbose () +{ + $opt_verbose && func_echo ${1+"$@"} + + # A bug in bash halts the script if the last line of a function + # fails when set -e is in force, so we need another command to + # work around that: + : } -# func_extract_archives gentop oldlib ... -func_extract_archives () +# func_echo_all arg... +# Invoke $ECHO with all args, space-separated. +func_echo_all () { - my_gentop="$1"; shift - my_oldlibs=${1+"$@"} - my_oldobjs="" - my_xlib="" - my_xabs="" - my_xdir="" - my_status="" + $ECHO "$*" +} - $show "${rm}r $my_gentop" - $run ${rm}r "$my_gentop" - $show "$mkdir $my_gentop" - $run $mkdir "$my_gentop" - my_status=$? - if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then - exit $my_status - fi +# func_error arg... +# Echo program name prefixed message to standard error. +func_error () +{ + $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2 +} - for my_xlib in $my_oldlibs; do - # Extract the objects. - case $my_xlib in - [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; - *) my_xabs=`pwd`"/$my_xlib" ;; - esac - my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'` - my_xdir="$my_gentop/$my_xlib" +# func_warning arg... +# Echo program name prefixed warning message to standard error. +func_warning () +{ + $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2 - $show "${rm}r $my_xdir" - $run ${rm}r "$my_xdir" - $show "$mkdir $my_xdir" - $run $mkdir "$my_xdir" - status=$? - if test "$status" -ne 0 && test ! -d "$my_xdir"; then - exit $status - fi - case $host in - *-darwin*) - $show "Extracting $my_xabs" - # Do not bother doing anything if just a dry run - if test -z "$run"; then - darwin_orig_dir=`pwd` - cd $my_xdir || exit $? - darwin_archive=$my_xabs - darwin_curdir=`pwd` - darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'` - darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null` - if test -n "$darwin_arches"; then - darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'` - darwin_arch= - $show "$darwin_base_archive has multiple architectures $darwin_arches" - for darwin_arch in $darwin_arches ; do - mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}" - lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" - cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" - func_extract_an_archive "`pwd`" "${darwin_base_archive}" - cd "$darwin_curdir" - $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" - done # $darwin_arches - ## Okay now we have a bunch of thin objects, gotta fatten them up :) - darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP` - darwin_file= - darwin_files= - for darwin_file in $darwin_filelist; do - darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP` - lipo -create -output "$darwin_file" $darwin_files - done # $darwin_filelist - ${rm}r unfat-$$ - cd "$darwin_orig_dir" - else - cd "$darwin_orig_dir" - func_extract_an_archive "$my_xdir" "$my_xabs" - fi # $darwin_arches - fi # $run - ;; - *) - func_extract_an_archive "$my_xdir" "$my_xabs" - ;; - esac - my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` - done - func_extract_archives_result="$my_oldobjs" + # bash bug again: + : } -# End of Shell function definitions -##################################### -# Darwin sucks -eval std_shrext=\"$shrext_cmds\" +# func_fatal_error arg... +# Echo program name prefixed message to standard error, and exit. +func_fatal_error () +{ + func_error ${1+"$@"} + exit $EXIT_FAILURE +} -# Parse our command line options once, thoroughly. -while test "$#" -gt 0 -do - arg="$1" - shift +# func_fatal_help arg... +# Echo program name prefixed message to standard error, followed by +# a help hint, and exit. +func_fatal_help () +{ + func_error ${1+"$@"} + func_fatal_error "$help" +} +help="Try \`$progname --help' for more information." ## default - case $arg in - -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;; - *) optarg= ;; - esac - # If the previous option needs an argument, assign it. - if test -n "$prev"; then - case $prev in - execute_dlfiles) - execute_dlfiles="$execute_dlfiles $arg" - ;; - tag) - tagname="$arg" - preserve_args="${preserve_args}=$arg" - - # Check whether tagname contains only valid characters - case $tagname in - *[!-_A-Za-z0-9,/]*) - $echo "$progname: invalid tag name: $tagname" 1>&2 - exit $EXIT_FAILURE - ;; +# func_grep expression filename +# Check whether EXPRESSION matches any line of FILENAME, without output. +func_grep () +{ + $GREP "$1" "$2" >/dev/null 2>&1 +} + + +# func_mkdir_p directory-path +# Make sure the entire path to DIRECTORY-PATH is available. +func_mkdir_p () +{ + my_directory_path="$1" + my_dir_list= + + if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then + + # Protect directory names starting with `-' + case $my_directory_path in + -*) my_directory_path="./$my_directory_path" ;; esac - case $tagname in - CC) - # Don't test for the "default" C tag, as we know, it's there, but - # not specially marked. - ;; - *) - if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then - taglist="$taglist $tagname" - # Evaluate the configuration. - eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`" - else - $echo "$progname: ignoring unknown tag $tagname" 1>&2 - fi - ;; - esac - ;; - *) - eval "$prev=\$arg" - ;; - esac + # While some portion of DIR does not yet exist... + while test ! -d "$my_directory_path"; do + # ...make a list in topmost first order. Use a colon delimited + # list incase some portion of path contains whitespace. + my_dir_list="$my_directory_path:$my_dir_list" - prev= - prevopt= - continue - fi + # If the last portion added has no slash in it, the list is done + case $my_directory_path in */*) ;; *) break ;; esac - # Have we seen a non-optional argument yet? - case $arg in - --help) - show_help=yes - ;; + # ...otherwise throw away the child directory and loop + my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"` + done + my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'` - --version) - $echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP" - $echo - $echo "Copyright (C) 2005 Free Software Foundation, Inc." - $echo "This is free software; see the source for copying conditions. There is NO" - $echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." - exit $? - ;; + save_mkdir_p_IFS="$IFS"; IFS=':' + for my_dir in $my_dir_list; do + IFS="$save_mkdir_p_IFS" + # mkdir can fail with a `File exist' error if two processes + # try to create one of the directories concurrently. Don't + # stop in that case! + $MKDIR "$my_dir" 2>/dev/null || : + done + IFS="$save_mkdir_p_IFS" - --config) - ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath - # Now print the configurations for the tags. - for tagname in $taglist; do - ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath" - done - exit $? - ;; + # Bail out if we (or some other process) failed to create a directory. + test -d "$my_directory_path" || \ + func_fatal_error "Failed to create \`$1'" + fi +} - --debug) - $echo "$progname: enabling shell trace mode" - set -x - preserve_args="$preserve_args $arg" - ;; - --dry-run | -n) - run=: - ;; +# func_mktempdir [string] +# Make a temporary directory that won't clash with other running +# libtool processes, and avoids race conditions if possible. If +# given, STRING is the basename for that directory. +func_mktempdir () +{ + my_template="${TMPDIR-/tmp}/${1-$progname}" - --features) - $echo "host: $host" - if test "$build_libtool_libs" = yes; then - $echo "enable shared libraries" + if test "$opt_dry_run" = ":"; then + # Return a directory name, but don't create it in dry-run mode + my_tmpdir="${my_template}-$$" else - $echo "disable shared libraries" - fi - if test "$build_old_libs" = yes; then - $echo "enable static libraries" - else - $echo "disable static libraries" + + # If mktemp works, use that first and foremost + my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` + + if test ! -d "$my_tmpdir"; then + # Failing that, at least try and use $RANDOM to avoid a race + my_tmpdir="${my_template}-${RANDOM-0}$$" + + save_mktempdir_umask=`umask` + umask 0077 + $MKDIR "$my_tmpdir" + umask $save_mktempdir_umask + fi + + # If we're not in dry-run mode, bomb out on failure + test -d "$my_tmpdir" || \ + func_fatal_error "cannot create temporary directory \`$my_tmpdir'" fi - exit $? - ;; - --finish) mode="finish" ;; + $ECHO "$my_tmpdir" +} - --mode) prevopt="--mode" prev=mode ;; - --mode=*) mode="$optarg" ;; - --preserve-dup-deps) duplicate_deps="yes" ;; +# func_quote_for_eval arg +# Aesthetically quote ARG to be evaled later. +# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT +# is double-quoted, suitable for a subsequent eval, whereas +# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters +# which are still active within double quotes backslashified. +func_quote_for_eval () +{ + case $1 in + *[\\\`\"\$]*) + func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;; + *) + func_quote_for_eval_unquoted_result="$1" ;; + esac - --quiet | --silent) - show=: - preserve_args="$preserve_args $arg" - ;; + case $func_quote_for_eval_unquoted_result in + # Double-quote args containing shell metacharacters to delay + # word splitting, command substitution and and variable + # expansion for a subsequent eval. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\"" + ;; + *) + func_quote_for_eval_result="$func_quote_for_eval_unquoted_result" + esac +} - --tag) prevopt="--tag" prev=tag ;; - --tag=*) - set tag "$optarg" ${1+"$@"} - shift - prev=tag - preserve_args="$preserve_args --tag" - ;; - -dlopen) - prevopt="-dlopen" - prev=execute_dlfiles - ;; +# func_quote_for_expand arg +# Aesthetically quote ARG to be evaled later; same as above, +# but do not quote variable references. +func_quote_for_expand () +{ + case $1 in + *[\\\`\"]*) + my_arg=`$ECHO "$1" | $SED \ + -e "$double_quote_subst" -e "$sed_double_backslash"` ;; + *) + my_arg="$1" ;; + esac - -*) - $echo "$modename: unrecognized option \`$arg'" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - ;; + case $my_arg in + # Double-quote args containing shell metacharacters to delay + # word splitting and command substitution for a subsequent eval. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + my_arg="\"$my_arg\"" + ;; + esac - *) - nonopt="$arg" - break - ;; - esac -done + func_quote_for_expand_result="$my_arg" +} -if test -n "$prevopt"; then - $echo "$modename: option \`$prevopt' requires an argument" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE -fi -# If this variable is set in any of the actions, the command in it -# will be execed at the end. This prevents here-documents from being -# left over by shells. -exec_cmd= +# func_show_eval cmd [fail_exp] +# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is +# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP +# is given, then evaluate it. +func_show_eval () +{ + my_cmd="$1" + my_fail_exp="${2-:}" -if test -z "$show_help"; then + ${opt_silent-false} || { + func_quote_for_expand "$my_cmd" + eval "func_echo $func_quote_for_expand_result" + } + + if ${opt_dry_run-false}; then :; else + eval "$my_cmd" + my_status=$? + if test "$my_status" -eq 0; then :; else + eval "(exit $my_status); $my_fail_exp" + fi + fi +} - # Infer the operation mode. - if test -z "$mode"; then - $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2 - $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2 - case $nonopt in - *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*) - mode=link - for arg - do - case $arg in - -c) - mode=compile - break - ;; - esac - done - ;; - *db | *dbx | *strace | *truss) - mode=execute - ;; - *install*|cp|mv) - mode=install - ;; - *rm) - mode=uninstall - ;; - *) - # If we have no mode, but dlfiles were specified, then do execute mode. - test -n "$execute_dlfiles" && mode=execute - # Just use the default operation mode. - if test -z "$mode"; then - if test -n "$nonopt"; then - $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2 - else - $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2 - fi +# func_show_eval_locale cmd [fail_exp] +# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is +# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP +# is given, then evaluate it. Use the saved locale for evaluation. +func_show_eval_locale () +{ + my_cmd="$1" + my_fail_exp="${2-:}" + + ${opt_silent-false} || { + func_quote_for_expand "$my_cmd" + eval "func_echo $func_quote_for_expand_result" + } + + if ${opt_dry_run-false}; then :; else + eval "$lt_user_locale + $my_cmd" + my_status=$? + eval "$lt_safe_locale" + if test "$my_status" -eq 0; then :; else + eval "(exit $my_status); $my_fail_exp" fi - ;; - esac - fi + fi +} - # Only execute mode is allowed to have -dlopen flags. - if test -n "$execute_dlfiles" && test "$mode" != execute; then - $echo "$modename: unrecognized option \`-dlopen'" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi +# func_tr_sh +# Turn $1 into a string suitable for a shell variable name. +# Result is stored in $func_tr_sh_result. All characters +# not in the set a-zA-Z0-9_ are replaced with '_'. Further, +# if $1 begins with a digit, a '_' is prepended as well. +func_tr_sh () +{ + case $1 in + [0-9]* | *[!a-zA-Z0-9_]*) + func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'` + ;; + * ) + func_tr_sh_result=$1 + ;; + esac +} - # Change the help message to a mode-specific one. - generic_help="$help" - help="Try \`$modename --help --mode=$mode' for more information." - - # These modes are in order of execution frequency so that they run quickly. - case $mode in - # libtool compile mode - compile) - modename="$modename: compile" - # Get the compilation command and the source file. - base_compile= - srcfile="$nonopt" # always keep a non-empty value in "srcfile" - suppress_opt=yes - suppress_output= - arg_mode=normal - libobj= - later= - for arg - do - case $arg_mode in - arg ) - # do not "continue". Instead, add this to base_compile - lastarg="$arg" - arg_mode=normal - ;; +# func_version +# Echo version message to standard output and exit. +func_version () +{ + $opt_debug - target ) - libobj="$arg" - arg_mode=normal - continue - ;; + $SED -n '/(C)/!b go + :more + /\./!{ + N + s/\n# / / + b more + } + :go + /^# '$PROGRAM' (GNU /,/# warranty; / { + s/^# // + s/^# *$// + s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/ + p + }' < "$progpath" + exit $? +} - normal ) - # Accept any command-line options. - case $arg in - -o) - if test -n "$libobj" ; then - $echo "$modename: you cannot specify \`-o' more than once" 1>&2 - exit $EXIT_FAILURE - fi - arg_mode=target - continue - ;; +# func_usage +# Echo short help message to standard output and exit. +func_usage () +{ + $opt_debug - -static | -prefer-pic | -prefer-non-pic) - later="$later $arg" - continue - ;; + $SED -n '/^# Usage:/,/^# *.*--help/ { + s/^# // + s/^# *$// + s/\$progname/'$progname'/ + p + }' < "$progpath" + echo + $ECHO "run \`$progname --help | more' for full usage" + exit $? +} - -no-suppress) - suppress_opt=no - continue - ;; +# func_help [NOEXIT] +# Echo long help message to standard output and exit, +# unless 'noexit' is passed as argument. +func_help () +{ + $opt_debug - -Xcompiler) - arg_mode=arg # the next one goes into the "base_compile" arg list - continue # The current "srcfile" will either be retained or - ;; # replaced later. I would guess that would be a bug. + $SED -n '/^# Usage:/,/# Report bugs to/ { + :print + s/^# // + s/^# *$// + s*\$progname*'$progname'* + s*\$host*'"$host"'* + s*\$SHELL*'"$SHELL"'* + s*\$LTCC*'"$LTCC"'* + s*\$LTCFLAGS*'"$LTCFLAGS"'* + s*\$LD*'"$LD"'* + s/\$with_gnu_ld/'"$with_gnu_ld"'/ + s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/ + s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/ + p + d + } + /^# .* home page:/b print + /^# General help using/b print + ' < "$progpath" + ret=$? + if test -z "$1"; then + exit $ret + fi +} - -Wc,*) - args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"` - lastarg= - save_ifs="$IFS"; IFS=',' - for arg in $args; do - IFS="$save_ifs" +# func_missing_arg argname +# Echo program name prefixed message to standard error and set global +# exit_cmd. +func_missing_arg () +{ + $opt_debug - # Double-quote args containing other shell metacharacters. - # Many Bourne shells cannot handle close brackets correctly - # in scan sets, so we specify it separately. - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - lastarg="$lastarg $arg" - done - IFS="$save_ifs" - lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"` + func_error "missing argument for $1." + exit_cmd=exit +} - # Add the arguments to base_compile. - base_compile="$base_compile $lastarg" - continue - ;; - * ) - # Accept the current argument as the source file. - # The previous "srcfile" becomes the current argument. - # - lastarg="$srcfile" - srcfile="$arg" - ;; - esac # case $arg - ;; - esac # case $arg_mode +# func_split_short_opt shortopt +# Set func_split_short_opt_name and func_split_short_opt_arg shell +# variables after splitting SHORTOPT after the 2nd character. +func_split_short_opt () +{ + my_sed_short_opt='1s/^\(..\).*$/\1/;q' + my_sed_short_rest='1s/^..\(.*\)$/\1/;q' - # Aesthetically quote the previous argument. - lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"` + func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"` + func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"` +} # func_split_short_opt may be replaced by extended shell implementation - case $lastarg in - # Double-quote args containing other shell metacharacters. - # Many Bourne shells cannot handle close brackets correctly - # in scan sets, and some SunOS ksh mistreat backslash-escaping - # in scan sets (worked around with variable expansion), - # and furthermore cannot handle '|' '&' '(' ')' in scan sets - # at all, so we specify them separately. - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - lastarg="\"$lastarg\"" - ;; - esac - base_compile="$base_compile $lastarg" - done # for arg +# func_split_long_opt longopt +# Set func_split_long_opt_name and func_split_long_opt_arg shell +# variables after splitting LONGOPT at the `=' sign. +func_split_long_opt () +{ + my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q' + my_sed_long_arg='1s/^--[^=]*=//' - case $arg_mode in - arg) - $echo "$modename: you must specify an argument for -Xcompile" - exit $EXIT_FAILURE - ;; - target) - $echo "$modename: you must specify a target with \`-o'" 1>&2 - exit $EXIT_FAILURE - ;; - *) - # Get the name of the library object. - [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'` - ;; - esac + func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"` + func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"` +} # func_split_long_opt may be replaced by extended shell implementation - # Recognize several different file suffixes. - # If the user specifies -o file.o, it is replaced with file.lo - xform='[cCFSifmso]' - case $libobj in - *.ada) xform=ada ;; - *.adb) xform=adb ;; - *.ads) xform=ads ;; - *.asm) xform=asm ;; - *.c++) xform=c++ ;; - *.cc) xform=cc ;; - *.ii) xform=ii ;; - *.class) xform=class ;; - *.cpp) xform=cpp ;; - *.cxx) xform=cxx ;; - *.f90) xform=f90 ;; - *.for) xform=for ;; - *.java) xform=java ;; - esac +exit_cmd=: - libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"` - case $libobj in - *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;; - *) - $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2 - exit $EXIT_FAILURE - ;; - esac - func_infer_tag $base_compile - for arg in $later; do - case $arg in - -static) - build_old_libs=yes - continue - ;; - -prefer-pic) - pic_mode=yes - continue - ;; +magic="%%%MAGIC variable%%%" +magic_exe="%%%MAGIC EXE variable%%%" - -prefer-non-pic) - pic_mode=no - continue - ;; - esac - done +# Global variables. +nonopt= +preserve_args= +lo2o="s/\\.lo\$/.${objext}/" +o2lo="s/\\.${objext}\$/.lo/" +extracted_archives= +extracted_serial=0 - qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"` - case $qlibobj in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - qlibobj="\"$qlibobj\"" ;; - esac - test "X$libobj" != "X$qlibobj" \ - && $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' &()|`$[]' \ - && $echo "$modename: libobj name \`$libobj' may not contain shell special characters." - objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` - xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$obj"; then - xdir= - else - xdir=$xdir/ - fi - lobj=${xdir}$objdir/$objname +# If this variable is set in any of the actions, the command in it +# will be execed at the end. This prevents here-documents from being +# left over by shells. +exec_cmd= - if test -z "$base_compile"; then - $echo "$modename: you must specify a compilation command" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi +# func_append var value +# Append VALUE to the end of shell variable VAR. +func_append () +{ + eval "${1}=\$${1}\${2}" +} # func_append may be replaced by extended shell implementation - # Delete any leftover library objects. - if test "$build_old_libs" = yes; then - removelist="$obj $lobj $libobj ${libobj}T" - else - removelist="$lobj $libobj ${libobj}T" - fi +# func_append_quoted var value +# Quote VALUE and append to the end of shell variable VAR, separated +# by a space. +func_append_quoted () +{ + func_quote_for_eval "${2}" + eval "${1}=\$${1}\\ \$func_quote_for_eval_result" +} # func_append_quoted may be replaced by extended shell implementation - $run $rm $removelist - trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15 - # On Cygwin there's no "real" PIC flag so we must build both object types - case $host_os in - cygwin* | mingw* | pw32* | os2*) - pic_mode=default - ;; - esac - if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then - # non-PIC code in shared libraries is not supported - pic_mode=default - fi +# func_arith arithmetic-term... +func_arith () +{ + func_arith_result=`expr "${@}"` +} # func_arith may be replaced by extended shell implementation - # Calculate the filename of the output object if compiler does - # not support -o with -c - if test "$compiler_c_o" = no; then - output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} - lockfile="$output_obj.lock" - removelist="$removelist $output_obj $lockfile" - trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15 - else - output_obj= - need_locks=no - lockfile= - fi - # Lock this critical section if it is needed - # We use this script file to make the link, it avoids creating a new file - if test "$need_locks" = yes; then - until $run ln "$srcfile" "$lockfile" 2>/dev/null; do - $show "Waiting for $lockfile to be removed" - sleep 2 - done - elif test "$need_locks" = warn; then - if test -f "$lockfile"; then - $echo "\ -*** ERROR, $lockfile exists and contains: -`cat $lockfile 2>/dev/null` +# func_len string +# STRING may not start with a hyphen. +func_len () +{ + func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len` +} # func_len may be replaced by extended shell implementation -This indicates that another process is trying to use the same -temporary object file, and libtool could not work around it because -your compiler does not support \`-c' and \`-o' together. If you -repeat this compilation, it may succeed, by chance, but you had better -avoid parallel builds (make -j) in this platform, or get a better -compiler." - $run $rm $removelist - exit $EXIT_FAILURE - fi - $echo "$srcfile" > "$lockfile" - fi +# func_lo2o object +func_lo2o () +{ + func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"` +} # func_lo2o may be replaced by extended shell implementation - if test -n "$fix_srcfile_path"; then - eval srcfile=\"$fix_srcfile_path\" - fi - qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"` - case $qsrcfile in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - qsrcfile="\"$qsrcfile\"" ;; - esac - $run $rm "$libobj" "${libobj}T" +# func_xform libobj-or-source +func_xform () +{ + func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'` +} # func_xform may be replaced by extended shell implementation - # Create a libtool object file (analogous to a ".la" file), - # but don't create it if we're doing a dry run. - test -z "$run" && cat > ${libobj}T </dev/null`" != "X$srcfile"; then - $echo "\ -*** ERROR, $lockfile contains: -`cat $lockfile 2>/dev/null` + exit $? +} -but it should contain: -$srcfile +# func_enable_tag tagname +# Verify that TAGNAME is valid, and either flag an error and exit, or +# enable the TAGNAME tag. We also add TAGNAME to the global $taglist +# variable here. +func_enable_tag () +{ + # Global variable: + tagname="$1" -This indicates that another process is trying to use the same -temporary object file, and libtool could not work around it because -your compiler does not support \`-c' and \`-o' together. If you -repeat this compilation, it may succeed, by chance, but you had better -avoid parallel builds (make -j) in this platform, or get a better -compiler." + re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$" + re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$" + sed_extractcf="/$re_begincf/,/$re_endcf/p" + + # Validate tagname. + case $tagname in + *[!-_A-Za-z0-9,/]*) + func_fatal_error "invalid tag name: $tagname" + ;; + esac - $run $rm $removelist - exit $EXIT_FAILURE - fi + # Don't test for the "default" C tag, as we know it's + # there but not specially marked. + case $tagname in + CC) ;; + *) + if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then + taglist="$taglist $tagname" - # Just move the object if needed, then go on to compile the next one - if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then - $show "$mv $output_obj $lobj" - if $run $mv $output_obj $lobj; then : - else - error=$? - $run $rm $removelist - exit $error - fi + # Evaluate the configuration. Be careful to quote the path + # and the sed script, to avoid splitting on whitespace, but + # also don't use non-portable quotes within backquotes within + # quotes we have to do it in 2 steps: + extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"` + eval "$extractedcf" + else + func_error "ignoring unknown tag $tagname" fi + ;; + esac +} - # Append the name of the PIC object to the libtool object file. - test -z "$run" && cat >> ${libobj}T <&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, but the +$progname: definition of this LT_INIT comes from an older release. +$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION +$progname: and run autoconf again. +_LT_EOF + else + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, but the +$progname: definition of this LT_INIT comes from $PACKAGE $macro_version. +$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION +$progname: and run autoconf again. +_LT_EOF fi else - # No PIC object so indicate it doesn't exist in the libtool - # object file. - test -z "$run" && cat >> ${libobj}T <&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, +$progname: but the definition of this LT_INIT comes from revision $macro_revision. +$progname: You should recreate aclocal.m4 with macros from revision $package_revision +$progname: of $PACKAGE $VERSION and run autoconf again. +_LT_EOF fi - # Only build a position-dependent object if we build old libraries. - if test "$build_old_libs" = yes; then - if test "$pic_mode" != yes; then - # Don't build PIC code - command="$base_compile $qsrcfile" - else - command="$base_compile $qsrcfile $pic_flag" - fi - if test "$compiler_c_o" = yes; then - command="$command -o $obj" - fi + exit $EXIT_MISMATCH + fi +} - # Suppress compiler output if we already did a PIC compilation. - command="$command$suppress_output" - $run $rm "$obj" "$output_obj" - $show "$command" - if $run eval "$command"; then : - else - $run $rm $removelist - exit $EXIT_FAILURE - fi - if test "$need_locks" = warn && - test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then - $echo "\ -*** ERROR, $lockfile contains: -`cat $lockfile 2>/dev/null` +# Shorthand for --mode=foo, only valid as the first argument +case $1 in +clean|clea|cle|cl) + shift; set dummy --mode clean ${1+"$@"}; shift + ;; +compile|compil|compi|comp|com|co|c) + shift; set dummy --mode compile ${1+"$@"}; shift + ;; +execute|execut|execu|exec|exe|ex|e) + shift; set dummy --mode execute ${1+"$@"}; shift + ;; +finish|finis|fini|fin|fi|f) + shift; set dummy --mode finish ${1+"$@"}; shift + ;; +install|instal|insta|inst|ins|in|i) + shift; set dummy --mode install ${1+"$@"}; shift + ;; +link|lin|li|l) + shift; set dummy --mode link ${1+"$@"}; shift + ;; +uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) + shift; set dummy --mode uninstall ${1+"$@"}; shift + ;; +esac -but it should contain: -$srcfile -This indicates that another process is trying to use the same -temporary object file, and libtool could not work around it because -your compiler does not support \`-c' and \`-o' together. If you -repeat this compilation, it may succeed, by chance, but you had better -avoid parallel builds (make -j) in this platform, or get a better -compiler." - $run $rm $removelist - exit $EXIT_FAILURE - fi +# Option defaults: +opt_debug=: +opt_dry_run=false +opt_config=false +opt_preserve_dup_deps=false +opt_features=false +opt_finish=false +opt_help=false +opt_help_all=false +opt_silent=: +opt_warning=: +opt_verbose=: +opt_silent=false +opt_verbose=false - # Just move the object if needed - if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then - $show "$mv $output_obj $obj" - if $run $mv $output_obj $obj; then : - else - error=$? - $run $rm $removelist - exit $error - fi - fi - # Append the name of the non-PIC object the libtool object file. - # Only append if the libtool object file exists. - test -z "$run" && cat >> ${libobj}T <> ${libobj}T <&2 - fi - if test -n "$link_static_flag"; then - dlopen_self=$dlopen_self_static - fi - else - if test -z "$pic_flag" && test -n "$link_static_flag"; then - dlopen_self=$dlopen_self_static - fi - fi - build_libtool_libs=no - build_old_libs=yes - prefer_static_libs=yes - break - ;; - esac - done + # Only execute mode is allowed to have -dlopen flags. + if test -n "$opt_dlopen" && test "$opt_mode" != execute; then + func_error "unrecognized option \`-dlopen'" + $ECHO "$help" 1>&2 + exit $EXIT_FAILURE + fi - # See if our shared archives depend on static archives. - test -n "$old_archive_from_new_cmds" && build_old_libs=yes - - # Go through the arguments, transforming them on the way. - while test "$#" -gt 0; do - arg="$1" - shift - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test - ;; - *) qarg=$arg ;; - esac - libtool_args="$libtool_args $qarg" - - # If the previous option needs an argument, assign it. - if test -n "$prev"; then - case $prev in - output) - compile_command="$compile_command @OUTPUT@" - finalize_command="$finalize_command @OUTPUT@" - ;; - esac - - case $prev in - dlfiles|dlprefiles) - if test "$preload" = no; then - # Add the symbol object into the linking commands. - compile_command="$compile_command @SYMFILE@" - finalize_command="$finalize_command @SYMFILE@" - preload=yes - fi - case $arg in - *.la | *.lo) ;; # We handle these cases below. - force) - if test "$dlself" = no; then - dlself=needless - export_dynamic=yes - fi - prev= - continue - ;; - self) - if test "$prev" = dlprefiles; then - dlself=yes - elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then - dlself=yes - else - dlself=needless - export_dynamic=yes - fi - prev= - continue - ;; - *) - if test "$prev" = dlfiles; then - dlfiles="$dlfiles $arg" - else - dlprefiles="$dlprefiles $arg" - fi - prev= - continue - ;; - esac - ;; - expsyms) - export_symbols="$arg" - if test ! -f "$arg"; then - $echo "$modename: symbol file \`$arg' does not exist" - exit $EXIT_FAILURE - fi - prev= - continue - ;; - expsyms_regex) - export_symbols_regex="$arg" - prev= - continue - ;; - inst_prefix) - inst_prefix_dir="$arg" - prev= - continue - ;; - precious_regex) - precious_files_regex="$arg" - prev= - continue - ;; - release) - release="-$arg" - prev= - continue - ;; - objectlist) - if test -f "$arg"; then - save_arg=$arg - moreargs= - for fil in `cat $save_arg` - do -# moreargs="$moreargs $fil" - arg=$fil - # A libtool-controlled object. - - # Check to see that this really is a libtool object. - if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - pic_object= - non_pic_object= + # Change the help message to a mode-specific one. + generic_help="$help" + help="Try \`$progname --help --mode=$opt_mode' for more information." + } - # Read the .lo file - # If there is no directory component, then add one. - case $arg in - */* | *\\*) . $arg ;; - *) . ./$arg ;; - esac - if test -z "$pic_object" || \ - test -z "$non_pic_object" || - test "$pic_object" = none && \ - test "$non_pic_object" = none; then - $echo "$modename: cannot find name of object for \`$arg'" 1>&2 - exit $EXIT_FAILURE - fi + # Bail if the options were screwed + $exit_cmd $EXIT_FAILURE +} - # Extract subdirectory from the argument. - xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$arg"; then - xdir= - else - xdir="$xdir/" - fi - if test "$pic_object" != none; then - # Prepend the subdirectory the object is found in. - pic_object="$xdir$pic_object" - if test "$prev" = dlfiles; then - if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then - dlfiles="$dlfiles $pic_object" - prev= - continue - else - # If libtool objects are unsupported, then we need to preload. - prev=dlprefiles - fi - fi - # CHECK ME: I think I busted this. -Ossama - if test "$prev" = dlprefiles; then - # Preload the old-style object. - dlprefiles="$dlprefiles $pic_object" - prev= - fi +## ----------- ## +## Main. ## +## ----------- ## + +# func_lalib_p file +# True iff FILE is a libtool `.la' library or `.lo' object file. +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_lalib_p () +{ + test -f "$1" && + $SED -e 4q "$1" 2>/dev/null \ + | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1 +} - # A PIC object. - libobjs="$libobjs $pic_object" - arg="$pic_object" - fi +# func_lalib_unsafe_p file +# True iff FILE is a libtool `.la' library or `.lo' object file. +# This function implements the same check as func_lalib_p without +# resorting to external programs. To this end, it redirects stdin and +# closes it afterwards, without saving the original file descriptor. +# As a safety measure, use it only where a negative result would be +# fatal anyway. Works if `file' does not exist. +func_lalib_unsafe_p () +{ + lalib_p=no + if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then + for lalib_p_l in 1 2 3 4 + do + read lalib_p_line + case "$lalib_p_line" in + \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;; + esac + done + exec 0<&5 5<&- + fi + test "$lalib_p" = yes +} - # Non-PIC object. - if test "$non_pic_object" != none; then - # Prepend the subdirectory the object is found in. - non_pic_object="$xdir$non_pic_object" +# func_ltwrapper_script_p file +# True iff FILE is a libtool wrapper script +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_ltwrapper_script_p () +{ + func_lalib_p "$1" +} - # A standard non-PIC object - non_pic_objects="$non_pic_objects $non_pic_object" - if test -z "$pic_object" || test "$pic_object" = none ; then - arg="$non_pic_object" - fi - fi - else - # Only an error if not doing a dry-run. - if test -z "$run"; then - $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 - exit $EXIT_FAILURE - else - # Dry-run case. +# func_ltwrapper_executable_p file +# True iff FILE is a libtool wrapper executable +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_ltwrapper_executable_p () +{ + func_ltwrapper_exec_suffix= + case $1 in + *.exe) ;; + *) func_ltwrapper_exec_suffix=.exe ;; + esac + $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1 +} - # Extract subdirectory from the argument. - xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$arg"; then - xdir= - else - xdir="$xdir/" - fi +# func_ltwrapper_scriptname file +# Assumes file is an ltwrapper_executable +# uses $file to determine the appropriate filename for a +# temporary ltwrapper_script. +func_ltwrapper_scriptname () +{ + func_dirname_and_basename "$1" "" "." + func_stripname '' '.exe' "$func_basename_result" + func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper" +} - pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` - non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` - libobjs="$libobjs $pic_object" - non_pic_objects="$non_pic_objects $non_pic_object" - fi - fi - done - else - $echo "$modename: link input file \`$save_arg' does not exist" - exit $EXIT_FAILURE - fi - arg=$save_arg - prev= - continue - ;; - rpath | xrpath) - # We need an absolute path. - case $arg in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - $echo "$modename: only absolute run-paths are allowed" 1>&2 - exit $EXIT_FAILURE - ;; - esac - if test "$prev" = rpath; then - case "$rpath " in - *" $arg "*) ;; - *) rpath="$rpath $arg" ;; - esac - else - case "$xrpath " in - *" $arg "*) ;; - *) xrpath="$xrpath $arg" ;; - esac - fi - prev= - continue - ;; - xcompiler) - compiler_flags="$compiler_flags $qarg" - prev= - compile_command="$compile_command $qarg" - finalize_command="$finalize_command $qarg" - continue - ;; - xlinker) - linker_flags="$linker_flags $qarg" - compiler_flags="$compiler_flags $wl$qarg" - prev= - compile_command="$compile_command $wl$qarg" - finalize_command="$finalize_command $wl$qarg" - continue - ;; - xcclinker) - linker_flags="$linker_flags $qarg" - compiler_flags="$compiler_flags $qarg" - prev= - compile_command="$compile_command $qarg" - finalize_command="$finalize_command $qarg" - continue - ;; - shrext) - shrext_cmds="$arg" - prev= - continue - ;; - darwin_framework) - compiler_flags="$compiler_flags $arg" - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" - prev= - continue - ;; - *) - eval "$prev=\"\$arg\"" - prev= - continue - ;; - esac - fi # test -n "$prev" +# func_ltwrapper_p file +# True iff FILE is a libtool wrapper script or wrapper executable +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_ltwrapper_p () +{ + func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1" +} - prevarg="$arg" - case $arg in - -all-static) - if test -n "$link_static_flag"; then - compile_command="$compile_command $link_static_flag" - finalize_command="$finalize_command $link_static_flag" - fi - continue - ;; +# func_execute_cmds commands fail_cmd +# Execute tilde-delimited COMMANDS. +# If FAIL_CMD is given, eval that upon failure. +# FAIL_CMD may read-access the current command in variable CMD! +func_execute_cmds () +{ + $opt_debug + save_ifs=$IFS; IFS='~' + for cmd in $1; do + IFS=$save_ifs + eval cmd=\"$cmd\" + func_show_eval "$cmd" "${2-:}" + done + IFS=$save_ifs +} - -allow-undefined) - # FIXME: remove this flag sometime in the future. - $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2 - continue - ;; - -avoid-version) - avoid_version=yes - continue - ;; +# func_source file +# Source FILE, adding directory component if necessary. +# Note that it is not necessary on cygwin/mingw to append a dot to +# FILE even if both FILE and FILE.exe exist: automatic-append-.exe +# behavior happens only for exec(3), not for open(2)! Also, sourcing +# `FILE.' does not work on cygwin managed mounts. +func_source () +{ + $opt_debug + case $1 in + */* | *\\*) . "$1" ;; + *) . "./$1" ;; + esac +} - -dlopen) - prev=dlfiles - continue - ;; - -dlpreopen) - prev=dlprefiles - continue - ;; +# func_resolve_sysroot PATH +# Replace a leading = in PATH with a sysroot. Store the result into +# func_resolve_sysroot_result +func_resolve_sysroot () +{ + func_resolve_sysroot_result=$1 + case $func_resolve_sysroot_result in + =*) + func_stripname '=' '' "$func_resolve_sysroot_result" + func_resolve_sysroot_result=$lt_sysroot$func_stripname_result + ;; + esac +} - -export-dynamic) - export_dynamic=yes - continue - ;; +# func_replace_sysroot PATH +# If PATH begins with the sysroot, replace it with = and +# store the result into func_replace_sysroot_result. +func_replace_sysroot () +{ + case "$lt_sysroot:$1" in + ?*:"$lt_sysroot"*) + func_stripname "$lt_sysroot" '' "$1" + func_replace_sysroot_result="=$func_stripname_result" + ;; + *) + # Including no sysroot. + func_replace_sysroot_result=$1 + ;; + esac +} - -export-symbols | -export-symbols-regex) - if test -n "$export_symbols" || test -n "$export_symbols_regex"; then - $echo "$modename: more than one -exported-symbols argument is not allowed" - exit $EXIT_FAILURE - fi - if test "X$arg" = "X-export-symbols"; then - prev=expsyms - else - prev=expsyms_regex +# func_infer_tag arg +# Infer tagged configuration to use if any are available and +# if one wasn't chosen via the "--tag" command line option. +# Only attempt this if the compiler in the base compile +# command doesn't match the default compiler. +# arg is usually of the form 'gcc ...' +func_infer_tag () +{ + $opt_debug + if test -n "$available_tags" && test -z "$tagname"; then + CC_quoted= + for arg in $CC; do + func_append_quoted CC_quoted "$arg" + done + CC_expanded=`func_echo_all $CC` + CC_quoted_expanded=`func_echo_all $CC_quoted` + case $@ in + # Blanks in the command may have been stripped by the calling shell, + # but not from the CC environment variable when configure was run. + " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ + " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;; + # Blanks at the start of $base_compile will cause this to fail + # if we don't check for them as well. + *) + for z in $available_tags; do + if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then + # Evaluate the configuration. + eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" + CC_quoted= + for arg in $CC; do + # Double-quote args containing other shell metacharacters. + func_append_quoted CC_quoted "$arg" + done + CC_expanded=`func_echo_all $CC` + CC_quoted_expanded=`func_echo_all $CC_quoted` + case "$@ " in + " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ + " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) + # The compiler in the base compile command matches + # the one in the tagged configuration. + # Assume this is the tagged configuration we want. + tagname=$z + break + ;; + esac + fi + done + # If $tagname still isn't set, then no tagged configuration + # was found and let the user know that the "--tag" command + # line option must be used. + if test -z "$tagname"; then + func_echo "unable to infer tagged configuration" + func_fatal_error "specify a tag with \`--tag'" +# else +# func_verbose "using $tagname tagged configuration" fi - continue ;; + esac + fi +} - -framework|-arch) - prev=darwin_framework - compiler_flags="$compiler_flags $arg" - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" - continue - ;; - -inst-prefix-dir) - prev=inst_prefix - continue - ;; - # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* - # so, if we see these flags be careful not to treat them like -L - -L[A-Z][A-Z]*:*) - case $with_gcc/$host in - no/*-*-irix* | /*-*-irix*) - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" - ;; - esac - continue - ;; +# func_write_libtool_object output_name pic_name nonpic_name +# Create a libtool object file (analogous to a ".la" file), +# but don't create it if we're doing a dry run. +func_write_libtool_object () +{ + write_libobj=${1} + if test "$build_libtool_libs" = yes; then + write_lobj=\'${2}\' + else + write_lobj=none + fi - -L*) - dir=`$echo "X$arg" | $Xsed -e 's/^-L//'` - # We need an absolute path. - case $dir in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - absdir=`cd "$dir" && pwd` - if test -z "$absdir"; then - $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2 - exit $EXIT_FAILURE - fi - dir="$absdir" - ;; - esac - case "$deplibs " in - *" -L$dir "*) ;; - *) - deplibs="$deplibs -L$dir" - lib_search_path="$lib_search_path $dir" - ;; - esac - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) - case :$dllsearchpath: in - *":$dir:"*) ;; - *) dllsearchpath="$dllsearchpath:$dir";; - esac - ;; - esac - continue - ;; + if test "$build_old_libs" = yes; then + write_oldobj=\'${3}\' + else + write_oldobj=none + fi - -l*) - if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then - case $host in - *-*-cygwin* | *-*-pw32* | *-*-beos*) - # These systems don't actually have a C or math library (as such) - continue - ;; - *-*-mingw* | *-*-os2*) - # These systems don't actually have a C library (as such) - test "X$arg" = "X-lc" && continue - ;; - *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) - # Do not include libc due to us having libc/libc_r. - test "X$arg" = "X-lc" && continue - ;; - *-*-rhapsody* | *-*-darwin1.[012]) - # Rhapsody C and math libraries are in the System framework - deplibs="$deplibs -framework System" - continue - esac - elif test "X$arg" = "X-lc_r"; then - case $host in - *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) - # Do not include libc_r directly, use -pthread flag. - continue - ;; - esac - fi - deplibs="$deplibs $arg" - continue - ;; + $opt_dry_run || { + cat >${write_libobj}T <\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" - if test "$with_gcc" = "yes" ; then - compiler_flags="$compiler_flags $arg" +################################################## +# FILE NAME AND PATH CONVERSION HELPER FUNCTIONS # +################################################## + +# func_convert_core_file_wine_to_w32 ARG +# Helper function used by file name conversion functions when $build is *nix, +# and $host is mingw, cygwin, or some other w32 environment. Relies on a +# correctly configured wine environment available, with the winepath program +# in $build's $PATH. +# +# ARG is the $build file name to be converted to w32 format. +# Result is available in $func_convert_core_file_wine_to_w32_result, and will +# be empty on error (or when ARG is empty) +func_convert_core_file_wine_to_w32 () +{ + $opt_debug + func_convert_core_file_wine_to_w32_result="$1" + if test -n "$1"; then + # Unfortunately, winepath does not exit with a non-zero error code, so we + # are forced to check the contents of stdout. On the other hand, if the + # command is not found, the shell will set an exit code of 127 and print + # *an error message* to stdout. So we must check for both error code of + # zero AND non-empty stdout, which explains the odd construction: + func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null` + if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then + func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" | + $SED -e "$lt_sed_naive_backslashify"` + else + func_convert_core_file_wine_to_w32_result= + fi + fi +} +# end: func_convert_core_file_wine_to_w32 + + +# func_convert_core_path_wine_to_w32 ARG +# Helper function used by path conversion functions when $build is *nix, and +# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly +# configured wine environment available, with the winepath program in $build's +# $PATH. Assumes ARG has no leading or trailing path separator characters. +# +# ARG is path to be converted from $build format to win32. +# Result is available in $func_convert_core_path_wine_to_w32_result. +# Unconvertible file (directory) names in ARG are skipped; if no directory names +# are convertible, then the result may be empty. +func_convert_core_path_wine_to_w32 () +{ + $opt_debug + # unfortunately, winepath doesn't convert paths, only file names + func_convert_core_path_wine_to_w32_result="" + if test -n "$1"; then + oldIFS=$IFS + IFS=: + for func_convert_core_path_wine_to_w32_f in $1; do + IFS=$oldIFS + func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f" + if test -n "$func_convert_core_file_wine_to_w32_result" ; then + if test -z "$func_convert_core_path_wine_to_w32_result"; then + func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result" + else + func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result" fi - continue - ;; + fi + done + IFS=$oldIFS + fi +} +# end: func_convert_core_path_wine_to_w32 - -shrext) - prev=shrext - continue - ;; - -no-fast-install) - fast_install=no - continue - ;; +# func_cygpath ARGS... +# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when +# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2) +# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or +# (2), returns the Cygwin file name or path in func_cygpath_result (input +# file name or path is assumed to be in w32 format, as previously converted +# from $build's *nix or MSYS format). In case (3), returns the w32 file name +# or path in func_cygpath_result (input file name or path is assumed to be in +# Cygwin format). Returns an empty string on error. +# +# ARGS are passed to cygpath, with the last one being the file name or path to +# be converted. +# +# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH +# environment variable; do not put it in $PATH. +func_cygpath () +{ + $opt_debug + if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then + func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null` + if test "$?" -ne 0; then + # on failure, ensure result is empty + func_cygpath_result= + fi + else + func_cygpath_result= + func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'" + fi +} +#end: func_cygpath - -no-install) - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) - # The PATH hackery in wrapper scripts is required on Windows - # in order for the loader to find any dlls it needs. - $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2 - $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2 - fast_install=no - ;; - *) no_install=yes ;; - esac - continue - ;; - -no-undefined) - allow_undefined=no - continue - ;; +# func_convert_core_msys_to_w32 ARG +# Convert file name or path ARG from MSYS format to w32 format. Return +# result in func_convert_core_msys_to_w32_result. +func_convert_core_msys_to_w32 () +{ + $opt_debug + # awkward: cmd appends spaces to result + func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null | + $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"` +} +#end: func_convert_core_msys_to_w32 - -objectlist) - prev=objectlist - continue - ;; - -o) prev=output ;; +# func_convert_file_check ARG1 ARG2 +# Verify that ARG1 (a file name in $build format) was converted to $host +# format in ARG2. Otherwise, emit an error message, but continue (resetting +# func_to_host_file_result to ARG1). +func_convert_file_check () +{ + $opt_debug + if test -z "$2" && test -n "$1" ; then + func_error "Could not determine host file name corresponding to" + func_error " \`$1'" + func_error "Continuing, but uninstalled executables may not work." + # Fallback: + func_to_host_file_result="$1" + fi +} +# end func_convert_file_check - -precious-files-regex) - prev=precious_regex - continue - ;; - -release) - prev=release - continue - ;; +# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH +# Verify that FROM_PATH (a path in $build format) was converted to $host +# format in TO_PATH. Otherwise, emit an error message, but continue, resetting +# func_to_host_file_result to a simplistic fallback value (see below). +func_convert_path_check () +{ + $opt_debug + if test -z "$4" && test -n "$3"; then + func_error "Could not determine the host path corresponding to" + func_error " \`$3'" + func_error "Continuing, but uninstalled executables may not work." + # Fallback. This is a deliberately simplistic "conversion" and + # should not be "improved". See libtool.info. + if test "x$1" != "x$2"; then + lt_replace_pathsep_chars="s|$1|$2|g" + func_to_host_path_result=`echo "$3" | + $SED -e "$lt_replace_pathsep_chars"` + else + func_to_host_path_result="$3" + fi + fi +} +# end func_convert_path_check - -rpath) - prev=rpath - continue - ;; - -R) - prev=xrpath - continue - ;; +# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG +# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT +# and appending REPL if ORIG matches BACKPAT. +func_convert_path_front_back_pathsep () +{ + $opt_debug + case $4 in + $1 ) func_to_host_path_result="$3$func_to_host_path_result" + ;; + esac + case $4 in + $2 ) func_append func_to_host_path_result "$3" + ;; + esac +} +# end func_convert_path_front_back_pathsep - -R*) - dir=`$echo "X$arg" | $Xsed -e 's/^-R//'` - # We need an absolute path. - case $dir in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - $echo "$modename: only absolute run-paths are allowed" 1>&2 - exit $EXIT_FAILURE - ;; - esac - case "$xrpath " in - *" $dir "*) ;; - *) xrpath="$xrpath $dir" ;; - esac - continue - ;; - -static) - # The effects of -static are defined in a previous loop. - # We used to do the same as -all-static on platforms that - # didn't have a PIC flag, but the assumption that the effects - # would be equivalent was wrong. It would break on at least - # Digital Unix and AIX. - continue - ;; +################################################## +# $build to $host FILE NAME CONVERSION FUNCTIONS # +################################################## +# invoked via `$to_host_file_cmd ARG' +# +# In each case, ARG is the path to be converted from $build to $host format. +# Result will be available in $func_to_host_file_result. - -thread-safe) - thread_safe=yes - continue - ;; - -version-info) - prev=vinfo - continue - ;; - -version-number) - prev=vinfo - vinfo_number=yes - continue - ;; +# func_to_host_file ARG +# Converts the file name ARG from $build format to $host format. Return result +# in func_to_host_file_result. +func_to_host_file () +{ + $opt_debug + $to_host_file_cmd "$1" +} +# end func_to_host_file - -Wc,*) - args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'` - arg= - save_ifs="$IFS"; IFS=',' - for flag in $args; do - IFS="$save_ifs" - case $flag in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - flag="\"$flag\"" - ;; - esac - arg="$arg $wl$flag" - compiler_flags="$compiler_flags $flag" - done - IFS="$save_ifs" - arg=`$echo "X$arg" | $Xsed -e "s/^ //"` - ;; - -Wl,*) - args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'` - arg= - save_ifs="$IFS"; IFS=',' - for flag in $args; do - IFS="$save_ifs" - case $flag in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - flag="\"$flag\"" - ;; - esac - arg="$arg $wl$flag" - compiler_flags="$compiler_flags $wl$flag" - linker_flags="$linker_flags $flag" - done - IFS="$save_ifs" - arg=`$echo "X$arg" | $Xsed -e "s/^ //"` - ;; +# func_to_tool_file ARG LAZY +# converts the file name ARG from $build format to toolchain format. Return +# result in func_to_tool_file_result. If the conversion in use is listed +# in (the comma separated) LAZY, no conversion takes place. +func_to_tool_file () +{ + $opt_debug + case ,$2, in + *,"$to_tool_file_cmd",*) + func_to_tool_file_result=$1 + ;; + *) + $to_tool_file_cmd "$1" + func_to_tool_file_result=$func_to_host_file_result + ;; + esac +} +# end func_to_tool_file - -Xcompiler) - prev=xcompiler - continue - ;; - -Xlinker) - prev=xlinker - continue - ;; +# func_convert_file_noop ARG +# Copy ARG to func_to_host_file_result. +func_convert_file_noop () +{ + func_to_host_file_result="$1" +} +# end func_convert_file_noop - -XCClinker) - prev=xcclinker - continue - ;; - -Kthread | -mthreads | -mt | -pthread | -pthreads | -threads | -qthreaded | -kthread ) - compiler_flags="$compiler_flags $arg" - continue - ;; +# func_convert_file_msys_to_w32 ARG +# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic +# conversion to w32 is not available inside the cwrapper. Returns result in +# func_to_host_file_result. +func_convert_file_msys_to_w32 () +{ + $opt_debug + func_to_host_file_result="$1" + if test -n "$1"; then + func_convert_core_msys_to_w32 "$1" + func_to_host_file_result="$func_convert_core_msys_to_w32_result" + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_msys_to_w32 - # Some other compiler flag. - -* | +*) - # Unknown arguments in both finalize_command and compile_command need - # to be aesthetically quoted because they are evaled later. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - ;; - *.$objext) - # A standard object. - objs="$objs $arg" - ;; +# func_convert_file_cygwin_to_w32 ARG +# Convert file name ARG from Cygwin to w32 format. Returns result in +# func_to_host_file_result. +func_convert_file_cygwin_to_w32 () +{ + $opt_debug + func_to_host_file_result="$1" + if test -n "$1"; then + # because $build is cygwin, we call "the" cygpath in $PATH; no need to use + # LT_CYGPATH in this case. + func_to_host_file_result=`cygpath -m "$1"` + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_cygwin_to_w32 - *.lo) - # A libtool-controlled object. - # Check to see that this really is a libtool object. - if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - pic_object= - non_pic_object= +# func_convert_file_nix_to_w32 ARG +# Convert file name ARG from *nix to w32 format. Requires a wine environment +# and a working winepath. Returns result in func_to_host_file_result. +func_convert_file_nix_to_w32 () +{ + $opt_debug + func_to_host_file_result="$1" + if test -n "$1"; then + func_convert_core_file_wine_to_w32 "$1" + func_to_host_file_result="$func_convert_core_file_wine_to_w32_result" + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_nix_to_w32 - # Read the .lo file - # If there is no directory component, then add one. - case $arg in - */* | *\\*) . $arg ;; - *) . ./$arg ;; - esac - if test -z "$pic_object" || \ - test -z "$non_pic_object" || - test "$pic_object" = none && \ - test "$non_pic_object" = none; then - $echo "$modename: cannot find name of object for \`$arg'" 1>&2 - exit $EXIT_FAILURE - fi +# func_convert_file_msys_to_cygwin ARG +# Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. +# Returns result in func_to_host_file_result. +func_convert_file_msys_to_cygwin () +{ + $opt_debug + func_to_host_file_result="$1" + if test -n "$1"; then + func_convert_core_msys_to_w32 "$1" + func_cygpath -u "$func_convert_core_msys_to_w32_result" + func_to_host_file_result="$func_cygpath_result" + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_msys_to_cygwin - # Extract subdirectory from the argument. - xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$arg"; then - xdir= - else - xdir="$xdir/" - fi - if test "$pic_object" != none; then - # Prepend the subdirectory the object is found in. - pic_object="$xdir$pic_object" +# func_convert_file_nix_to_cygwin ARG +# Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed +# in a wine environment, working winepath, and LT_CYGPATH set. Returns result +# in func_to_host_file_result. +func_convert_file_nix_to_cygwin () +{ + $opt_debug + func_to_host_file_result="$1" + if test -n "$1"; then + # convert from *nix to w32, then use cygpath to convert from w32 to cygwin. + func_convert_core_file_wine_to_w32 "$1" + func_cygpath -u "$func_convert_core_file_wine_to_w32_result" + func_to_host_file_result="$func_cygpath_result" + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_nix_to_cygwin - if test "$prev" = dlfiles; then - if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then - dlfiles="$dlfiles $pic_object" - prev= - continue - else - # If libtool objects are unsupported, then we need to preload. - prev=dlprefiles - fi - fi - # CHECK ME: I think I busted this. -Ossama - if test "$prev" = dlprefiles; then - # Preload the old-style object. - dlprefiles="$dlprefiles $pic_object" - prev= - fi +############################################# +# $build to $host PATH CONVERSION FUNCTIONS # +############################################# +# invoked via `$to_host_path_cmd ARG' +# +# In each case, ARG is the path to be converted from $build to $host format. +# The result will be available in $func_to_host_path_result. +# +# Path separators are also converted from $build format to $host format. If +# ARG begins or ends with a path separator character, it is preserved (but +# converted to $host format) on output. +# +# All path conversion functions are named using the following convention: +# file name conversion function : func_convert_file_X_to_Y () +# path conversion function : func_convert_path_X_to_Y () +# where, for any given $build/$host combination the 'X_to_Y' value is the +# same. If conversion functions are added for new $build/$host combinations, +# the two new functions must follow this pattern, or func_init_to_host_path_cmd +# will break. - # A PIC object. - libobjs="$libobjs $pic_object" - arg="$pic_object" - fi - # Non-PIC object. - if test "$non_pic_object" != none; then - # Prepend the subdirectory the object is found in. - non_pic_object="$xdir$non_pic_object" +# func_init_to_host_path_cmd +# Ensures that function "pointer" variable $to_host_path_cmd is set to the +# appropriate value, based on the value of $to_host_file_cmd. +to_host_path_cmd= +func_init_to_host_path_cmd () +{ + $opt_debug + if test -z "$to_host_path_cmd"; then + func_stripname 'func_convert_file_' '' "$to_host_file_cmd" + to_host_path_cmd="func_convert_path_${func_stripname_result}" + fi +} - # A standard non-PIC object - non_pic_objects="$non_pic_objects $non_pic_object" - if test -z "$pic_object" || test "$pic_object" = none ; then - arg="$non_pic_object" - fi - fi - else - # Only an error if not doing a dry-run. - if test -z "$run"; then - $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 - exit $EXIT_FAILURE - else - # Dry-run case. - # Extract subdirectory from the argument. - xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$arg"; then - xdir= - else - xdir="$xdir/" - fi +# func_to_host_path ARG +# Converts the path ARG from $build format to $host format. Return result +# in func_to_host_path_result. +func_to_host_path () +{ + $opt_debug + func_init_to_host_path_cmd + $to_host_path_cmd "$1" +} +# end func_to_host_path - pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` - non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` - libobjs="$libobjs $pic_object" - non_pic_objects="$non_pic_objects $non_pic_object" - fi - fi - ;; - *.$libext) - # An archive. - deplibs="$deplibs $arg" - old_deplibs="$old_deplibs $arg" - continue - ;; +# func_convert_path_noop ARG +# Copy ARG to func_to_host_path_result. +func_convert_path_noop () +{ + func_to_host_path_result="$1" +} +# end func_convert_path_noop - *.la) - # A libtool-controlled library. - if test "$prev" = dlfiles; then - # This library was specified with -dlopen. - dlfiles="$dlfiles $arg" - prev= - elif test "$prev" = dlprefiles; then - # The library was specified with -dlpreopen. - dlprefiles="$dlprefiles $arg" - prev= - else - deplibs="$deplibs $arg" - fi - continue - ;; +# func_convert_path_msys_to_w32 ARG +# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic +# conversion to w32 is not available inside the cwrapper. Returns result in +# func_to_host_path_result. +func_convert_path_msys_to_w32 () +{ + $opt_debug + func_to_host_path_result="$1" + if test -n "$1"; then + # Remove leading and trailing path separator characters from ARG. MSYS + # behavior is inconsistent here; cygpath turns them into '.;' and ';.'; + # and winepath ignores them completely. + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" + func_to_host_path_result="$func_convert_core_msys_to_w32_result" + func_convert_path_check : ";" \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" + fi +} +# end func_convert_path_msys_to_w32 - # Some other compiler argument. - *) - # Unknown arguments in both finalize_command and compile_command need - # to be aesthetically quoted because they are evaled later. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - ;; - esac # arg - # Now actually substitute the argument into the commands. - if test -n "$arg"; then - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" - fi - done # argument parsing loop +# func_convert_path_cygwin_to_w32 ARG +# Convert path ARG from Cygwin to w32 format. Returns result in +# func_to_host_file_result. +func_convert_path_cygwin_to_w32 () +{ + $opt_debug + func_to_host_path_result="$1" + if test -n "$1"; then + # See func_convert_path_msys_to_w32: + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"` + func_convert_path_check : ";" \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" + fi +} +# end func_convert_path_cygwin_to_w32 - if test -n "$prev"; then - $echo "$modename: the \`$prevarg' option requires an argument" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi - if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then - eval arg=\"$export_dynamic_flag_spec\" - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" - fi +# func_convert_path_nix_to_w32 ARG +# Convert path ARG from *nix to w32 format. Requires a wine environment and +# a working winepath. Returns result in func_to_host_file_result. +func_convert_path_nix_to_w32 () +{ + $opt_debug + func_to_host_path_result="$1" + if test -n "$1"; then + # See func_convert_path_msys_to_w32: + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" + func_to_host_path_result="$func_convert_core_path_wine_to_w32_result" + func_convert_path_check : ";" \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" + fi +} +# end func_convert_path_nix_to_w32 - oldlibs= - # calculate the name of the file, without its directory - outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'` - libobjs_save="$libobjs" - if test -n "$shlibpath_var"; then - # get the directories listed in $shlibpath_var - eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` - else - shlib_search_path= - fi - eval sys_lib_search_path=\"$sys_lib_search_path_spec\" - eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" +# func_convert_path_msys_to_cygwin ARG +# Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. +# Returns result in func_to_host_file_result. +func_convert_path_msys_to_cygwin () +{ + $opt_debug + func_to_host_path_result="$1" + if test -n "$1"; then + # See func_convert_path_msys_to_w32: + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" + func_cygpath -u -p "$func_convert_core_msys_to_w32_result" + func_to_host_path_result="$func_cygpath_result" + func_convert_path_check : : \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" : "$1" + fi +} +# end func_convert_path_msys_to_cygwin - output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'` - if test "X$output_objdir" = "X$output"; then - output_objdir="$objdir" - else - output_objdir="$output_objdir/$objdir" - fi - # Create the object directory. - if test ! -d "$output_objdir"; then - $show "$mkdir $output_objdir" - $run $mkdir $output_objdir - status=$? - if test "$status" -ne 0 && test ! -d "$output_objdir"; then - exit $status - fi - fi - # Determine the type of output - case $output in - "") - $echo "$modename: you must specify an output file" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - ;; - *.$libext) linkmode=oldlib ;; - *.lo | *.$objext) linkmode=obj ;; - *.la) linkmode=lib ;; - *) linkmode=prog ;; # Anything else should be a program. - esac +# func_convert_path_nix_to_cygwin ARG +# Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a +# a wine environment, working winepath, and LT_CYGPATH set. Returns result in +# func_to_host_file_result. +func_convert_path_nix_to_cygwin () +{ + $opt_debug + func_to_host_path_result="$1" + if test -n "$1"; then + # Remove leading and trailing path separator characters from + # ARG. msys behavior is inconsistent here, cygpath turns them + # into '.;' and ';.', and winepath ignores them completely. + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" + func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result" + func_to_host_path_result="$func_cygpath_result" + func_convert_path_check : : \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" : "$1" + fi +} +# end func_convert_path_nix_to_cygwin - case $host in - *cygwin* | *mingw* | *pw32*) - # don't eliminate duplications in $postdeps and $predeps - duplicate_compiler_generated_deps=yes - ;; - *) - duplicate_compiler_generated_deps=$duplicate_deps - ;; - esac - specialdeplibs= - libs= - # Find all interdependent deplibs by searching for libraries - # that are linked more than once (e.g. -la -lb -la) - for deplib in $deplibs; do - if test "X$duplicate_deps" = "Xyes" ; then - case "$libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; - esac - fi - libs="$libs $deplib" - done +# func_mode_compile arg... +func_mode_compile () +{ + $opt_debug + # Get the compilation command and the source file. + base_compile= + srcfile="$nonopt" # always keep a non-empty value in "srcfile" + suppress_opt=yes + suppress_output= + arg_mode=normal + libobj= + later= + pie_flag= - if test "$linkmode" = lib; then - libs="$predeps $libs $compiler_lib_search_path $postdeps" + for arg + do + case $arg_mode in + arg ) + # do not "continue". Instead, add this to base_compile + lastarg="$arg" + arg_mode=normal + ;; - # Compute libraries that are listed more than once in $predeps - # $postdeps and mark them as special (i.e., whose duplicates are - # not to be eliminated). - pre_post_deps= - if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then - for pre_post_dep in $predeps $postdeps; do - case "$pre_post_deps " in - *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; - esac - pre_post_deps="$pre_post_deps $pre_post_dep" - done - fi - pre_post_deps= - fi + target ) + libobj="$arg" + arg_mode=normal + continue + ;; - deplibs= - newdependency_libs= - newlib_search_path= - need_relink=no # whether we're linking any uninstalled libtool libraries - notinst_deplibs= # not-installed libtool libraries - notinst_path= # paths that contain not-installed libtool libraries - case $linkmode in - lib) - passes="conv link" - for file in $dlfiles $dlprefiles; do - case $file in - *.la) ;; - *) - $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2 - exit $EXIT_FAILURE - ;; - esac - done - ;; - prog) - compile_deplibs= - finalize_deplibs= - alldeplibs=no - newdlfiles= - newdlprefiles= - passes="conv scan dlopen dlpreopen link" - ;; - *) passes="conv" - ;; - esac - for pass in $passes; do - if test "$linkmode,$pass" = "lib,link" || - test "$linkmode,$pass" = "prog,scan"; then - libs="$deplibs" - deplibs= - fi - if test "$linkmode" = prog; then - case $pass in - dlopen) libs="$dlfiles" ;; - dlpreopen) libs="$dlprefiles" ;; - link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; - esac - fi - if test "$pass" = dlopen; then - # Collect dlpreopened libraries - save_deplibs="$deplibs" - deplibs= - fi - for deplib in $libs; do - lib= - found=no - case $deplib in - -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe) - if test "$linkmode,$pass" = "prog,link"; then - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - compiler_flags="$compiler_flags $deplib" - fi + normal ) + # Accept any command-line options. + case $arg in + -o) + test -n "$libobj" && \ + func_fatal_error "you cannot specify \`-o' more than once" + arg_mode=target continue ;; - -l*) - if test "$linkmode" != lib && test "$linkmode" != prog; then - $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2 - continue - fi - name=`$echo "X$deplib" | $Xsed -e 's/^-l//'` - for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do - for search_ext in .la $std_shrext .so .a; do - # Search the libtool library - lib="$searchdir/lib${name}${search_ext}" - if test -f "$lib"; then - if test "$search_ext" = ".la"; then - found=yes - else - found=no - fi - break 2 - fi - done - done - if test "$found" != yes; then - # deplib doesn't seem to be a libtool library - if test "$linkmode,$pass" = "prog,link"; then - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - deplibs="$deplib $deplibs" - test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" - fi - continue - else # deplib is a libtool library - # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, - # We need to do some special things here, and not later. - if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then - case " $predeps $postdeps " in - *" $deplib "*) - if (${SED} -e '2q' $lib | - grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - library_names= - old_library= - case $lib in - */* | *\\*) . $lib ;; - *) . ./$lib ;; - esac - for l in $old_library $library_names; do - ll="$l" - done - if test "X$ll" = "X$old_library" ; then # only static version available - found=no - ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` - test "X$ladir" = "X$lib" && ladir="." - lib=$ladir/$old_library - if test "$linkmode,$pass" = "prog,link"; then - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - deplibs="$deplib $deplibs" - test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" - fi - continue - fi - fi - ;; - *) ;; - esac - fi - fi - ;; # -l - -L*) - case $linkmode in - lib) - deplibs="$deplib $deplibs" - test "$pass" = conv && continue - newdependency_libs="$deplib $newdependency_libs" - newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` - ;; - prog) - if test "$pass" = conv; then - deplibs="$deplib $deplibs" - continue - fi - if test "$pass" = scan; then - deplibs="$deplib $deplibs" - else - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - fi - newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` - ;; - *) - $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2 - ;; - esac # linkmode - continue - ;; # -L - -R*) - if test "$pass" = link; then - dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'` - # Make sure the xrpath contains only unique directories. - case "$xrpath " in - *" $dir "*) ;; - *) xrpath="$xrpath $dir" ;; - esac - fi - deplibs="$deplib $deplibs" + + -pie | -fpie | -fPIE) + func_append pie_flag " $arg" continue ;; - *.la) lib="$deplib" ;; - *.$libext) - if test "$pass" = conv; then - deplibs="$deplib $deplibs" - continue - fi - case $linkmode in - lib) - valid_a_lib=no - case $deplibs_check_method in - match_pattern*) - set dummy $deplibs_check_method - match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` - if eval $echo \"$deplib\" 2>/dev/null \ - | $SED 10q \ - | $EGREP "$match_pattern_regex" > /dev/null; then - valid_a_lib=yes - fi - ;; - pass_all) - valid_a_lib=yes - ;; - esac - if test "$valid_a_lib" != yes; then - $echo - $echo "*** Warning: Trying to link with static lib archive $deplib." - $echo "*** I have the capability to make that library automatically link in when" - $echo "*** you link to this library. But I can only do this if you have a" - $echo "*** shared version of the library, which you do not appear to have" - $echo "*** because the file extensions .$libext of this argument makes me believe" - $echo "*** that it is just a static archive that I should not used here." - else - $echo - $echo "*** Warning: Linking the shared library $output against the" - $echo "*** static library $deplib is not portable!" - deplibs="$deplib $deplibs" - fi - continue - ;; - prog) - if test "$pass" != link; then - deplibs="$deplib $deplibs" - else - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - fi - continue - ;; - esac # linkmode - ;; # *.$libext - *.lo | *.$objext) - if test "$pass" = conv; then - deplibs="$deplib $deplibs" - elif test "$linkmode" = prog; then - if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then - # If there is no dlopen support or we're linking statically, - # we need to preload. - newdlprefiles="$newdlprefiles $deplib" - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - newdlfiles="$newdlfiles $deplib" - fi - fi + + -shared | -static | -prefer-pic | -prefer-non-pic) + func_append later " $arg" continue ;; - %DEPLIBS%) - alldeplibs=yes + + -no-suppress) + suppress_opt=no continue ;; - esac # case $deplib - if test "$found" = yes || test -f "$lib"; then : - else - $echo "$modename: cannot find the library \`$lib'" 1>&2 - exit $EXIT_FAILURE - fi - # Check to see that this really is a libtool archive. - if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : - else - $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 - exit $EXIT_FAILURE - fi + -Xcompiler) + arg_mode=arg # the next one goes into the "base_compile" arg list + continue # The current "srcfile" will either be retained or + ;; # replaced later. I would guess that would be a bug. - ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` - test "X$ladir" = "X$lib" && ladir="." + -Wc,*) + func_stripname '-Wc,' '' "$arg" + args=$func_stripname_result + lastarg= + save_ifs="$IFS"; IFS=',' + for arg in $args; do + IFS="$save_ifs" + func_append_quoted lastarg "$arg" + done + IFS="$save_ifs" + func_stripname ' ' '' "$lastarg" + lastarg=$func_stripname_result - dlname= - dlopen= - dlpreopen= - libdir= - library_names= - old_library= - # If the library was installed with an old release of libtool, - # it will not redefine variables installed, or shouldnotlink - installed=yes - shouldnotlink=no - avoidtemprpath= + # Add the arguments to base_compile. + func_append base_compile " $lastarg" + continue + ;; + *) + # Accept the current argument as the source file. + # The previous "srcfile" becomes the current argument. + # + lastarg="$srcfile" + srcfile="$arg" + ;; + esac # case $arg + ;; + esac # case $arg_mode - # Read the .la file - case $lib in - */* | *\\*) . $lib ;; - *) . ./$lib ;; - esac + # Aesthetically quote the previous argument. + func_append_quoted base_compile "$lastarg" + done # for arg - if test "$linkmode,$pass" = "lib,link" || - test "$linkmode,$pass" = "prog,scan" || - { test "$linkmode" != prog && test "$linkmode" != lib; }; then - test -n "$dlopen" && dlfiles="$dlfiles $dlopen" - test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" - fi + case $arg_mode in + arg) + func_fatal_error "you must specify an argument for -Xcompile" + ;; + target) + func_fatal_error "you must specify a target with \`-o'" + ;; + *) + # Get the name of the library object. + test -z "$libobj" && { + func_basename "$srcfile" + libobj="$func_basename_result" + } + ;; + esac - if test "$pass" = conv; then - # Only check for convenience libraries - deplibs="$lib $deplibs" - if test -z "$libdir"; then - if test -z "$old_library"; then - $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 - exit $EXIT_FAILURE - fi - # It is a libtool convenience library, so add in its objects. - convenience="$convenience $ladir/$objdir/$old_library" - old_convenience="$old_convenience $ladir/$objdir/$old_library" - tmp_libs= - for deplib in $dependency_libs; do - deplibs="$deplib $deplibs" - if test "X$duplicate_deps" = "Xyes" ; then - case "$tmp_libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; - esac - fi - tmp_libs="$tmp_libs $deplib" - done - elif test "$linkmode" != prog && test "$linkmode" != lib; then - $echo "$modename: \`$lib' is not a convenience library" 1>&2 - exit $EXIT_FAILURE - fi - continue - fi # $pass = conv + # Recognize several different file suffixes. + # If the user specifies -o file.o, it is replaced with file.lo + case $libobj in + *.[cCFSifmso] | \ + *.ada | *.adb | *.ads | *.asm | \ + *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \ + *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup) + func_xform "$libobj" + libobj=$func_xform_result + ;; + esac + case $libobj in + *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;; + *) + func_fatal_error "cannot determine name of library object from \`$libobj'" + ;; + esac - # Get the name of the library we link against. - linklib= - for l in $old_library $library_names; do - linklib="$l" - done - if test -z "$linklib"; then - $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 - exit $EXIT_FAILURE - fi + func_infer_tag $base_compile - # This library was specified with -dlopen. - if test "$pass" = dlopen; then - if test -z "$libdir"; then - $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2 - exit $EXIT_FAILURE - fi - if test -z "$dlname" || - test "$dlopen_support" != yes || - test "$build_libtool_libs" = no; then - # If there is no dlname, no dlopen support or we're linking - # statically, we need to preload. We also need to preload any - # dependent libraries so libltdl's deplib preloader doesn't - # bomb out in the load deplibs phase. - dlprefiles="$dlprefiles $lib $dependency_libs" - else - newdlfiles="$newdlfiles $lib" - fi - continue - fi # $pass = dlopen + for arg in $later; do + case $arg in + -shared) + test "$build_libtool_libs" != yes && \ + func_fatal_configuration "can not build a shared library" + build_old_libs=no + continue + ;; - # We need an absolute path. - case $ladir in - [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; - *) - abs_ladir=`cd "$ladir" && pwd` - if test -z "$abs_ladir"; then - $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2 - $echo "$modename: passing it literally to the linker, although it might fail" 1>&2 - abs_ladir="$ladir" - fi - ;; - esac - laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` + -static) + build_libtool_libs=no + build_old_libs=yes + continue + ;; - # Find the relevant object directory and library name. - if test "X$installed" = Xyes; then - if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then - $echo "$modename: warning: library \`$lib' was moved." 1>&2 - dir="$ladir" - absdir="$abs_ladir" - libdir="$abs_ladir" - else - dir="$libdir" - absdir="$libdir" - fi - test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes - else - if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then - dir="$ladir" - absdir="$abs_ladir" - # Remove this search path later - notinst_path="$notinst_path $abs_ladir" - else - dir="$ladir/$objdir" - absdir="$abs_ladir/$objdir" - # Remove this search path later - notinst_path="$notinst_path $abs_ladir" - fi - fi # $installed = yes - name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` + -prefer-pic) + pic_mode=yes + continue + ;; - # This library was specified with -dlpreopen. - if test "$pass" = dlpreopen; then - if test -z "$libdir"; then - $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2 - exit $EXIT_FAILURE - fi - # Prefer using a static library (so that no silly _DYNAMIC symbols - # are required to link). - if test -n "$old_library"; then - newdlprefiles="$newdlprefiles $dir/$old_library" - # Otherwise, use the dlname, so that lt_dlopen finds it. - elif test -n "$dlname"; then - newdlprefiles="$newdlprefiles $dir/$dlname" - else - newdlprefiles="$newdlprefiles $dir/$linklib" - fi - fi # $pass = dlpreopen + -prefer-non-pic) + pic_mode=no + continue + ;; + esac + done - if test -z "$libdir"; then - # Link the convenience library - if test "$linkmode" = lib; then - deplibs="$dir/$old_library $deplibs" - elif test "$linkmode,$pass" = "prog,link"; then - compile_deplibs="$dir/$old_library $compile_deplibs" - finalize_deplibs="$dir/$old_library $finalize_deplibs" - else - deplibs="$lib $deplibs" # used for prog,scan pass - fi - continue - fi + func_quote_for_eval "$libobj" + test "X$libobj" != "X$func_quote_for_eval_result" \ + && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \ + && func_warning "libobj name \`$libobj' may not contain shell special characters." + func_dirname_and_basename "$obj" "/" "" + objname="$func_basename_result" + xdir="$func_dirname_result" + lobj=${xdir}$objdir/$objname + test -z "$base_compile" && \ + func_fatal_help "you must specify a compilation command" - if test "$linkmode" = prog && test "$pass" != link; then - newlib_search_path="$newlib_search_path $ladir" - deplibs="$lib $deplibs" + # Delete any leftover library objects. + if test "$build_old_libs" = yes; then + removelist="$obj $lobj $libobj ${libobj}T" + else + removelist="$lobj $libobj ${libobj}T" + fi - linkalldeplibs=no - if test "$link_all_deplibs" != no || test -z "$library_names" || - test "$build_libtool_libs" = no; then - linkalldeplibs=yes - fi + # On Cygwin there's no "real" PIC flag so we must build both object types + case $host_os in + cygwin* | mingw* | pw32* | os2* | cegcc*) + pic_mode=default + ;; + esac + if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then + # non-PIC code in shared libraries is not supported + pic_mode=default + fi - tmp_libs= - for deplib in $dependency_libs; do - case $deplib in - -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test - esac - # Need to link against all dependency_libs? - if test "$linkalldeplibs" = yes; then - deplibs="$deplib $deplibs" - else - # Need to hardcode shared library paths - # or/and link against static libraries - newdependency_libs="$deplib $newdependency_libs" - fi - if test "X$duplicate_deps" = "Xyes" ; then - case "$tmp_libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; - esac - fi - tmp_libs="$tmp_libs $deplib" - done # for deplib - continue - fi # $linkmode = prog... + # Calculate the filename of the output object if compiler does + # not support -o with -c + if test "$compiler_c_o" = no; then + output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext} + lockfile="$output_obj.lock" + else + output_obj= + need_locks=no + lockfile= + fi - if test "$linkmode,$pass" = "prog,link"; then - if test -n "$library_names" && - { test "$prefer_static_libs" = no || test -z "$old_library"; }; then - # We need to hardcode the library path - if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then - # Make sure the rpath contains only unique directories. - case "$temp_rpath " in - *" $dir "*) ;; - *" $absdir "*) ;; - *) temp_rpath="$temp_rpath $absdir" ;; - esac - fi + # Lock this critical section if it is needed + # We use this script file to make the link, it avoids creating a new file + if test "$need_locks" = yes; then + until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do + func_echo "Waiting for $lockfile to be removed" + sleep 2 + done + elif test "$need_locks" = warn; then + if test -f "$lockfile"; then + $ECHO "\ +*** ERROR, $lockfile exists and contains: +`cat $lockfile 2>/dev/null` - # Hardcode the library path. - # Skip directories that are in the system default run-time - # search path. - case " $sys_lib_dlsearch_path " in - *" $absdir "*) ;; - *) - case "$compile_rpath " in - *" $absdir "*) ;; - *) compile_rpath="$compile_rpath $absdir" - esac - ;; - esac - case " $sys_lib_dlsearch_path " in - *" $libdir "*) ;; - *) - case "$finalize_rpath " in - *" $libdir "*) ;; - *) finalize_rpath="$finalize_rpath $libdir" - esac - ;; - esac - fi # $linkmode,$pass = prog,link... +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." - if test "$alldeplibs" = yes && - { test "$deplibs_check_method" = pass_all || - { test "$build_libtool_libs" = yes && - test -n "$library_names"; }; }; then - # We only need to search for static libraries - continue - fi - fi + $opt_dry_run || $RM $removelist + exit $EXIT_FAILURE + fi + func_append removelist " $output_obj" + $ECHO "$srcfile" > "$lockfile" + fi - link_static=no # Whether the deplib will be linked statically - if test -n "$library_names" && - { test "$prefer_static_libs" = no || test -z "$old_library"; }; then - if test "$installed" = no; then - notinst_deplibs="$notinst_deplibs $lib" - need_relink=yes - fi - # This is a shared library + $opt_dry_run || $RM $removelist + func_append removelist " $lockfile" + trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15 + + func_to_tool_file "$srcfile" func_convert_file_msys_to_w32 + srcfile=$func_to_tool_file_result + func_quote_for_eval "$srcfile" + qsrcfile=$func_quote_for_eval_result - # Warn about portability, can't link against -module's on - # some systems (darwin) - if test "$shouldnotlink" = yes && test "$pass" = link ; then - $echo - if test "$linkmode" = prog; then - $echo "*** Warning: Linking the executable $output against the loadable module" - else - $echo "*** Warning: Linking the shared library $output against the loadable module" - fi - $echo "*** $linklib is not portable!" - fi - if test "$linkmode" = lib && - test "$hardcode_into_libs" = yes; then - # Hardcode the library path. - # Skip directories that are in the system default run-time - # search path. - case " $sys_lib_dlsearch_path " in - *" $absdir "*) ;; - *) - case "$compile_rpath " in - *" $absdir "*) ;; - *) compile_rpath="$compile_rpath $absdir" - esac - ;; - esac - case " $sys_lib_dlsearch_path " in - *" $libdir "*) ;; - *) - case "$finalize_rpath " in - *" $libdir "*) ;; - *) finalize_rpath="$finalize_rpath $libdir" - esac - ;; - esac - fi + # Only build a PIC object if we are building libtool libraries. + if test "$build_libtool_libs" = yes; then + # Without this assignment, base_compile gets emptied. + fbsd_hideous_sh_bug=$base_compile - if test -n "$old_archive_from_expsyms_cmds"; then - # figure out the soname - set dummy $library_names - realname="$2" - shift; shift - libname=`eval \\$echo \"$libname_spec\"` - # use dlname if we got it. it's perfectly good, no? - if test -n "$dlname"; then - soname="$dlname" - elif test -n "$soname_spec"; then - # bleh windows - case $host in - *cygwin* | mingw*) - major=`expr $current - $age` - versuffix="-$major" - ;; - esac - eval soname=\"$soname_spec\" - else - soname="$realname" - fi + if test "$pic_mode" != no; then + command="$base_compile $qsrcfile $pic_flag" + else + # Don't build PIC code + command="$base_compile $qsrcfile" + fi - # Make a new name for the extract_expsyms_cmds to use - soroot="$soname" - soname=`$echo $soroot | ${SED} -e 's/^.*\///'` - newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a" + func_mkdir_p "$xdir$objdir" - # If the library has no export list, then create one now - if test -f "$output_objdir/$soname-def"; then : - else - $show "extracting exported symbol list from \`$soname'" - save_ifs="$IFS"; IFS='~' - cmds=$extract_expsyms_cmds - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - fi + if test -z "$output_obj"; then + # Place PIC objects in $objdir + func_append command " -o $lobj" + fi - # Create $newlib - if test -f "$output_objdir/$newlib"; then :; else - $show "generating import library for \`$soname'" - save_ifs="$IFS"; IFS='~' - cmds=$old_archive_from_expsyms_cmds - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - fi - # make sure the library variables are pointing to the new library - dir=$output_objdir - linklib=$newlib - fi # test -n "$old_archive_from_expsyms_cmds" + func_show_eval_locale "$command" \ + 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE' - if test "$linkmode" = prog || test "$mode" != relink; then - add_shlibpath= - add_dir= - add= - lib_linked=yes - case $hardcode_action in - immediate | unsupported) - if test "$hardcode_direct" = no; then - add="$dir/$linklib" - case $host in - *-*-sco3.2v5* ) add_dir="-L$dir" ;; - *-*-darwin* ) - # if the lib is a module then we can not link against - # it, someone is ignoring the new warnings I added - if /usr/bin/file -L $add 2> /dev/null | $EGREP "bundle" >/dev/null ; then - $echo "** Warning, lib $linklib is a module, not a shared library" - if test -z "$old_library" ; then - $echo - $echo "** And there doesn't seem to be a static archive available" - $echo "** The link will probably fail, sorry" - else - add="$dir/$old_library" - fi - fi - esac - elif test "$hardcode_minus_L" = no; then - case $host in - *-*-sunos*) add_shlibpath="$dir" ;; - esac - add_dir="-L$dir" - add="-l$name" - elif test "$hardcode_shlibpath_var" = no; then - add_shlibpath="$dir" - add="-l$name" - else - lib_linked=no - fi - ;; - relink) - if test "$hardcode_direct" = yes; then - add="$dir/$linklib" - elif test "$hardcode_minus_L" = yes; then - add_dir="-L$dir" - # Try looking first in the location we're being installed to. - if test -n "$inst_prefix_dir"; then - case $libdir in - [\\/]*) - add_dir="$add_dir -L$inst_prefix_dir$libdir" - ;; - esac - fi - add="-l$name" - elif test "$hardcode_shlibpath_var" = yes; then - add_shlibpath="$dir" - add="-l$name" - else - lib_linked=no - fi - ;; - *) lib_linked=no ;; - esac + if test "$need_locks" = warn && + test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then + $ECHO "\ +*** ERROR, $lockfile contains: +`cat $lockfile 2>/dev/null` - if test "$lib_linked" != yes; then - $echo "$modename: configuration error: unsupported hardcode properties" - exit $EXIT_FAILURE - fi +but it should contain: +$srcfile - if test -n "$add_shlibpath"; then - case :$compile_shlibpath: in - *":$add_shlibpath:"*) ;; - *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; - esac - fi - if test "$linkmode" = prog; then - test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" - test -n "$add" && compile_deplibs="$add $compile_deplibs" - else - test -n "$add_dir" && deplibs="$add_dir $deplibs" - test -n "$add" && deplibs="$add $deplibs" - if test "$hardcode_direct" != yes && \ - test "$hardcode_minus_L" != yes && \ - test "$hardcode_shlibpath_var" = yes; then - case :$finalize_shlibpath: in - *":$libdir:"*) ;; - *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; - esac - fi - fi - fi +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." - if test "$linkmode" = prog || test "$mode" = relink; then - add_shlibpath= - add_dir= - add= - # Finalize command for both is simple: just hardcode it. - if test "$hardcode_direct" = yes; then - add="$libdir/$linklib" - elif test "$hardcode_minus_L" = yes; then - add_dir="-L$libdir" - add="-l$name" - elif test "$hardcode_shlibpath_var" = yes; then - case :$finalize_shlibpath: in - *":$libdir:"*) ;; - *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; - esac - add="-l$name" - elif test "$hardcode_automatic" = yes; then - if test -n "$inst_prefix_dir" && - test -f "$inst_prefix_dir$libdir/$linklib" ; then - add="$inst_prefix_dir$libdir/$linklib" - else - add="$libdir/$linklib" - fi - else - # We cannot seem to hardcode it, guess we'll fake it. - add_dir="-L$libdir" - # Try looking first in the location we're being installed to. - if test -n "$inst_prefix_dir"; then - case $libdir in - [\\/]*) - add_dir="$add_dir -L$inst_prefix_dir$libdir" - ;; - esac - fi - add="-l$name" - fi + $opt_dry_run || $RM $removelist + exit $EXIT_FAILURE + fi - if test "$linkmode" = prog; then - test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" - test -n "$add" && finalize_deplibs="$add $finalize_deplibs" - else - test -n "$add_dir" && deplibs="$add_dir $deplibs" - test -n "$add" && deplibs="$add $deplibs" - fi - fi - elif test "$linkmode" = prog; then - # Here we assume that one of hardcode_direct or hardcode_minus_L - # is not unsupported. This is valid on all known static and - # shared platforms. - if test "$hardcode_direct" != unsupported; then - test -n "$old_library" && linklib="$old_library" - compile_deplibs="$dir/$linklib $compile_deplibs" - finalize_deplibs="$dir/$linklib $finalize_deplibs" - else - compile_deplibs="-l$name -L$dir $compile_deplibs" - finalize_deplibs="-l$name -L$dir $finalize_deplibs" - fi - elif test "$build_libtool_libs" = yes; then - # Not a shared library - if test "$deplibs_check_method" != pass_all; then - # We're trying link a shared library against a static one - # but the system doesn't support it. + # Just move the object if needed, then go on to compile the next one + if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then + func_show_eval '$MV "$output_obj" "$lobj"' \ + 'error=$?; $opt_dry_run || $RM $removelist; exit $error' + fi - # Just print a warning and add the library to dependency_libs so - # that the program can be linked against the static library. - $echo - $echo "*** Warning: This system can not link to static lib archive $lib." - $echo "*** I have the capability to make that library automatically link in when" - $echo "*** you link to this library. But I can only do this if you have a" - $echo "*** shared version of the library, which you do not appear to have." - if test "$module" = yes; then - $echo "*** But as you try to build a module library, libtool will still create " - $echo "*** a static module, that should work as long as the dlopening application" - $echo "*** is linked with the -dlopen flag to resolve symbols at runtime." - if test -z "$global_symbol_pipe"; then - $echo - $echo "*** However, this would only work if libtool was able to extract symbol" - $echo "*** lists from a program, using \`nm' or equivalent, but libtool could" - $echo "*** not find such a program. So, this module is probably useless." - $echo "*** \`nm' from GNU binutils and a full rebuild may help." - fi - if test "$build_old_libs" = no; then - build_libtool_libs=module - build_old_libs=yes - else - build_libtool_libs=no - fi - fi - else - deplibs="$dir/$old_library $deplibs" - link_static=yes - fi - fi # link shared/static library? + # Allow error messages only from the first compilation. + if test "$suppress_opt" = yes; then + suppress_output=' >/dev/null 2>&1' + fi + fi - if test "$linkmode" = lib; then - if test -n "$dependency_libs" && - { test "$hardcode_into_libs" != yes || - test "$build_old_libs" = yes || - test "$link_static" = yes; }; then - # Extract -R from dependency_libs - temp_deplibs= - for libdir in $dependency_libs; do - case $libdir in - -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'` - case " $xrpath " in - *" $temp_xrpath "*) ;; - *) xrpath="$xrpath $temp_xrpath";; - esac;; - *) temp_deplibs="$temp_deplibs $libdir";; - esac - done - dependency_libs="$temp_deplibs" - fi + # Only build a position-dependent object if we build old libraries. + if test "$build_old_libs" = yes; then + if test "$pic_mode" != yes; then + # Don't build PIC code + command="$base_compile $qsrcfile$pie_flag" + else + command="$base_compile $qsrcfile $pic_flag" + fi + if test "$compiler_c_o" = yes; then + func_append command " -o $obj" + fi - newlib_search_path="$newlib_search_path $absdir" - # Link against this library - test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" - # ... and its dependency_libs - tmp_libs= - for deplib in $dependency_libs; do - newdependency_libs="$deplib $newdependency_libs" - if test "X$duplicate_deps" = "Xyes" ; then - case "$tmp_libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; - esac - fi - tmp_libs="$tmp_libs $deplib" - done + # Suppress compiler output if we already did a PIC compilation. + func_append command "$suppress_output" + func_show_eval_locale "$command" \ + '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' - if test "$link_all_deplibs" != no; then - # Add the search paths of all dependency libraries - for deplib in $dependency_libs; do - case $deplib in - -L*) path="$deplib" ;; - *.la) - dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'` - test "X$dir" = "X$deplib" && dir="." - # We need an absolute path. - case $dir in - [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; - *) - absdir=`cd "$dir" && pwd` - if test -z "$absdir"; then - $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2 - absdir="$dir" - fi - ;; - esac - if grep "^installed=no" $deplib > /dev/null; then - path="$absdir/$objdir" - else - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` - if test -z "$libdir"; then - $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 - exit $EXIT_FAILURE - fi - if test "$absdir" != "$libdir"; then - $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2 - fi - path="$absdir" - fi - depdepl= - case $host in - *-*-darwin*) - # we do not want to link against static libs, - # but need to link against shared - eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` - if test -n "$deplibrary_names" ; then - for tmp in $deplibrary_names ; do - depdepl=$tmp - done - if test -f "$path/$depdepl" ; then - depdepl="$path/$depdepl" - fi - # do not add paths which are already there - case " $newlib_search_path " in - *" $path "*) ;; - *) newlib_search_path="$newlib_search_path $path";; - esac - fi - path="" - ;; - *) - path="-L$path" - ;; - esac - ;; - -l*) - case $host in - *-*-darwin*) - # Again, we only want to link against shared libraries - eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"` - for tmp in $newlib_search_path ; do - if test -f "$tmp/lib$tmp_libs.dylib" ; then - eval depdepl="$tmp/lib$tmp_libs.dylib" - break - fi - done - path="" - ;; - *) continue ;; - esac - ;; - *) continue ;; - esac - case " $deplibs " in - *" $path "*) ;; - *) deplibs="$path $deplibs" ;; - esac - case " $deplibs " in - *" $depdepl "*) ;; - *) deplibs="$depdepl $deplibs" ;; - esac - done - fi # link_all_deplibs != no - fi # linkmode = lib - done # for deplib in $libs - dependency_libs="$newdependency_libs" - if test "$pass" = dlpreopen; then - # Link the dlpreopened libraries before other libraries - for deplib in $save_deplibs; do - deplibs="$deplib $deplibs" - done - fi - if test "$pass" != dlopen; then - if test "$pass" != conv; then - # Make sure lib_search_path contains only unique directories. - lib_search_path= - for dir in $newlib_search_path; do - case "$lib_search_path " in - *" $dir "*) ;; - *) lib_search_path="$lib_search_path $dir" ;; - esac - done - newlib_search_path= - fi + if test "$need_locks" = warn && + test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then + $ECHO "\ +*** ERROR, $lockfile contains: +`cat $lockfile 2>/dev/null` - if test "$linkmode,$pass" != "prog,link"; then - vars="deplibs" - else - vars="compile_deplibs finalize_deplibs" - fi - for var in $vars dependency_libs; do - # Add libraries to $var in reverse order - eval tmp_libs=\"\$$var\" - new_libs= - for deplib in $tmp_libs; do - # FIXME: Pedantically, this is the right thing to do, so - # that some nasty dependency loop isn't accidentally - # broken: - #new_libs="$deplib $new_libs" - # Pragmatically, this seems to cause very few problems in - # practice: - case $deplib in - -L*) new_libs="$deplib $new_libs" ;; - -R*) ;; - *) - # And here is the reason: when a library appears more - # than once as an explicit dependence of a library, or - # is implicitly linked in more than once by the - # compiler, it is considered special, and multiple - # occurrences thereof are not removed. Compare this - # with having the same library being listed as a - # dependency of multiple other libraries: in this case, - # we know (pedantically, we assume) the library does not - # need to be listed more than once, so we keep only the - # last copy. This is not always right, but it is rare - # enough that we require users that really mean to play - # such unportable linking tricks to link the library - # using -Wl,-lname, so that libtool does not consider it - # for duplicate removal. - case " $specialdeplibs " in - *" $deplib "*) new_libs="$deplib $new_libs" ;; - *) - case " $new_libs " in - *" $deplib "*) ;; - *) new_libs="$deplib $new_libs" ;; - esac - ;; - esac - ;; - esac - done - tmp_libs= - for deplib in $new_libs; do - case $deplib in - -L*) - case " $tmp_libs " in - *" $deplib "*) ;; - *) tmp_libs="$tmp_libs $deplib" ;; - esac - ;; - *) tmp_libs="$tmp_libs $deplib" ;; - esac - done - eval $var=\"$tmp_libs\" - done # for var - fi - # Last step: remove runtime libs from dependency_libs - # (they stay in deplibs) - tmp_libs= - for i in $dependency_libs ; do - case " $predeps $postdeps $compiler_lib_search_path " in - *" $i "*) - i="" - ;; - esac - if test -n "$i" ; then - tmp_libs="$tmp_libs $i" - fi - done - dependency_libs=$tmp_libs - done # for pass - if test "$linkmode" = prog; then - dlfiles="$newdlfiles" - dlprefiles="$newdlprefiles" - fi +but it should contain: +$srcfile - case $linkmode in - oldlib) - if test -n "$deplibs"; then - $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2 - fi +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2 + $opt_dry_run || $RM $removelist + exit $EXIT_FAILURE fi - if test -n "$rpath"; then - $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2 + # Just move the object if needed + if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then + func_show_eval '$MV "$output_obj" "$obj"' \ + 'error=$?; $opt_dry_run || $RM $removelist; exit $error' fi + fi - if test -n "$xrpath"; then - $echo "$modename: warning: \`-R' is ignored for archives" 1>&2 - fi + $opt_dry_run || { + func_write_libtool_object "$libobj" "$objdir/$objname" "$objname" - if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2 + # Unlock the critical section if it was locked + if test "$need_locks" != no; then + removelist=$lockfile + $RM "$lockfile" fi + } - if test -n "$release"; then - $echo "$modename: warning: \`-release' is ignored for archives" 1>&2 - fi + exit $EXIT_SUCCESS +} - if test -n "$export_symbols" || test -n "$export_symbols_regex"; then - $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2 - fi +$opt_help || { + test "$opt_mode" = compile && func_mode_compile ${1+"$@"} +} - # Now set the variables for building old libraries. - build_libtool_libs=no - oldlibs="$output" - objs="$objs$old_deplibs" - ;; +func_mode_help () +{ + # We need to display help for each of the modes. + case $opt_mode in + "") + # Generic help is extracted from the usage comments + # at the start of this file. + func_help + ;; - lib) - # Make sure we only generate libraries of the form `libNAME.la'. - case $outputname in - lib*) - name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` - eval shared_ext=\"$shrext_cmds\" - eval libname=\"$libname_spec\" - ;; - *) - if test "$module" = no; then - $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi - if test "$need_lib_prefix" != no; then - # Add the "lib" prefix for modules if required - name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` - eval shared_ext=\"$shrext_cmds\" - eval libname=\"$libname_spec\" - else - libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` - fi - ;; - esac + clean) + $ECHO \ +"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE... - if test -n "$objs"; then - if test "$deplibs_check_method" != pass_all; then - $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1 - exit $EXIT_FAILURE - else - $echo - $echo "*** Warning: Linking the shared library $output against the non-libtool" - $echo "*** objects $objs is not portable!" - libobjs="$libobjs $objs" - fi - fi +Remove files from the build directory. - if test "$dlself" != no; then - $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2 - fi +RM is the name of the program to use to delete files associated with each FILE +(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +to RM. - set dummy $rpath - if test "$#" -gt 2; then - $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2 - fi - install_libdir="$2" +If FILE is a libtool library, object or program, all the files associated +with it are deleted. Otherwise, only FILE itself is deleted using RM." + ;; - oldlibs= - if test -z "$rpath"; then - if test "$build_libtool_libs" = yes; then - # Building a libtool convenience library. - # Some compilers have problems with a `.al' extension so - # convenience libraries should have the same extension an - # archive normally would. - oldlibs="$output_objdir/$libname.$libext $oldlibs" - build_libtool_libs=convenience - build_old_libs=yes - fi + compile) + $ECHO \ +"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE - if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2 - fi +Compile a source file into a libtool library object. - if test -n "$release"; then - $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2 - fi - else +This mode accepts the following additional options: - # Parse the version information argument. - save_ifs="$IFS"; IFS=':' - set dummy $vinfo 0 0 0 - IFS="$save_ifs" + -o OUTPUT-FILE set the output file name to OUTPUT-FILE + -no-suppress do not suppress compiler output for multiple passes + -prefer-pic try to build PIC objects only + -prefer-non-pic try to build non-PIC objects only + -shared do not build a \`.o' file suitable for static linking + -static only build a \`.o' file suitable for static linking + -Wc,FLAG pass FLAG directly to the compiler - if test -n "$8"; then - $echo "$modename: too many parameters to \`-version-info'" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi +COMPILE-COMMAND is a command to be used in creating a \`standard' object file +from the given SOURCEFILE. - # convert absolute version numbers to libtool ages - # this retains compatibility with .la files and attempts - # to make the code below a bit more comprehensible +The output file name is determined by removing the directory component from +SOURCEFILE, then substituting the C source code suffix \`.c' with the +library object suffix, \`.lo'." + ;; - case $vinfo_number in - yes) - number_major="$2" - number_minor="$3" - number_revision="$4" - # - # There are really only two kinds -- those that - # use the current revision as the major version - # and those that subtract age and use age as - # a minor version. But, then there is irix - # which has an extra 1 added just for fun - # - case $version_type in - darwin|linux|osf|windows) - current=`expr $number_major + $number_minor` - age="$number_minor" - revision="$number_revision" - ;; - freebsd-aout|freebsd-elf|sunos) - current="$number_major" - revision="$number_minor" - age="0" - ;; - irix|nonstopux) - current=`expr $number_major + $number_minor - 1` - age="$number_minor" - revision="$number_minor" - ;; - esac - ;; - no) - current="$2" - revision="$3" - age="$4" - ;; - esac + execute) + $ECHO \ +"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]... - # Check that each of the things are valid numbers. - case $current in - 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; - *) - $echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2 - $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit $EXIT_FAILURE - ;; - esac +Automatically set library path, then run a program. - case $revision in - 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; - *) - $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2 - $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit $EXIT_FAILURE - ;; - esac +This mode accepts the following additional options: - case $age in - 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; - *) - $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2 - $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit $EXIT_FAILURE - ;; - esac + -dlopen FILE add the directory containing FILE to the library path - if test "$age" -gt "$current"; then - $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2 - $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit $EXIT_FAILURE - fi +This mode sets the library path environment variable according to \`-dlopen' +flags. - # Calculate the version variables. - major= - versuffix= - verstring= - case $version_type in - none) ;; +If any of the ARGS are libtool executable wrappers, then they are translated +into their corresponding uninstalled binary, and any of their required library +directories are added to the library path. - darwin) - # Like Linux, but with the current version available in - # verstring for coding it into the library header - major=.`expr $current - $age` - versuffix="$major.$age.$revision" - # Darwin ld doesn't like 0 for these options... - minor_current=`expr $current + 1` - verstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" - ;; +Then, COMMAND is executed, with ARGS as arguments." + ;; - freebsd-aout) - major=".$current" - versuffix=".$current.$revision"; - ;; + finish) + $ECHO \ +"Usage: $progname [OPTION]... --mode=finish [LIBDIR]... - freebsd-elf) - major=".$current" - versuffix=".$current"; - ;; +Complete the installation of libtool libraries. - irix | nonstopux) - major=`expr $current - $age + 1` +Each LIBDIR is a directory that contains libtool libraries. - case $version_type in - nonstopux) verstring_prefix=nonstopux ;; - *) verstring_prefix=sgi ;; - esac - verstring="$verstring_prefix$major.$revision" +The commands that this mode executes may require superuser privileges. Use +the \`--dry-run' option if you just want to see what would be executed." + ;; - # Add in all the interfaces that we are compatible with. - loop=$revision - while test "$loop" -ne 0; do - iface=`expr $revision - $loop` - loop=`expr $loop - 1` - verstring="$verstring_prefix$major.$iface:$verstring" - done + install) + $ECHO \ +"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND... - # Before this point, $major must not contain `.'. - major=.$major - versuffix="$major.$revision" - ;; +Install executables or libraries. - linux) - major=.`expr $current - $age` - versuffix="$major.$age.$revision" - ;; +INSTALL-COMMAND is the installation command. The first component should be +either the \`install' or \`cp' program. - osf) - major=.`expr $current - $age` - versuffix=".$current.$age.$revision" - verstring="$current.$age.$revision" +The following components of INSTALL-COMMAND are treated specially: - # Add in all the interfaces that we are compatible with. - loop=$age - while test "$loop" -ne 0; do - iface=`expr $current - $loop` - loop=`expr $loop - 1` - verstring="$verstring:${iface}.0" - done + -inst-prefix-dir PREFIX-DIR Use PREFIX-DIR as a staging area for installation - # Make executables depend on our current version. - verstring="$verstring:${current}.0" - ;; +The rest of the components are interpreted as arguments to that command (only +BSD-compatible install options are recognized)." + ;; - sunos) - major=".$current" - versuffix=".$current.$revision" - ;; + link) + $ECHO \ +"Usage: $progname [OPTION]... --mode=link LINK-COMMAND... - windows) - # Use '-' rather than '.', since we only want one - # extension on DOS 8.3 filesystems. - major=`expr $current - $age` - versuffix="-$major" - ;; +Link object files or libraries together to form another library, or to +create an executable program. - *) - $echo "$modename: unknown library version type \`$version_type'" 1>&2 - $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 - exit $EXIT_FAILURE - ;; - esac +LINK-COMMAND is a command using the C compiler that you would use to create +a program from several object files. - # Clear the version info if we defaulted, and they specified a release. - if test -z "$vinfo" && test -n "$release"; then - major= - case $version_type in - darwin) - # we can't check for "0.0" in archive_cmds due to quoting - # problems, so we reset it completely - verstring= - ;; - *) - verstring="0.0" - ;; - esac - if test "$need_version" = no; then - versuffix= - else - versuffix=".0.0" - fi - fi +The following components of LINK-COMMAND are treated specially: - # Remove version info from name if versioning should be avoided - if test "$avoid_version" = yes && test "$need_version" = no; then - major= - versuffix= - verstring="" - fi + -all-static do not do any dynamic linking at all + -avoid-version do not add a version suffix if possible + -bindir BINDIR specify path to binaries directory (for systems where + libraries must be found in the PATH setting at runtime) + -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime + -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols + -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) + -export-symbols SYMFILE + try to export only the symbols listed in SYMFILE + -export-symbols-regex REGEX + try to export only the symbols matching REGEX + -LLIBDIR search LIBDIR for required installed libraries + -lNAME OUTPUT-FILE requires the installed library libNAME + -module build a library that can dlopened + -no-fast-install disable the fast-install mode + -no-install link a not-installable executable + -no-undefined declare that a library does not refer to external symbols + -o OUTPUT-FILE create OUTPUT-FILE from the specified objects + -objectlist FILE Use a list of object files found in FILE to specify objects + -precious-files-regex REGEX + don't remove output files matching REGEX + -release RELEASE specify package release information + -rpath LIBDIR the created library will eventually be installed in LIBDIR + -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries + -shared only do dynamic linking of libtool libraries + -shrext SUFFIX override the standard shared library file extension + -static do not do any dynamic linking of uninstalled libtool libraries + -static-libtool-libs + do not do any dynamic linking of libtool libraries + -version-info CURRENT[:REVISION[:AGE]] + specify library version info [each variable defaults to 0] + -weak LIBNAME declare that the target provides the LIBNAME interface + -Wc,FLAG + -Xcompiler FLAG pass linker-specific FLAG directly to the compiler + -Wl,FLAG + -Xlinker FLAG pass linker-specific FLAG directly to the linker + -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC) - # Check to see if the archive will have undefined symbols. - if test "$allow_undefined" = yes; then - if test "$allow_undefined_flag" = unsupported; then - $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2 - build_libtool_libs=no - build_old_libs=yes - fi - else - # Don't allow undefined symbols. - allow_undefined_flag="$no_undefined_flag" - fi - fi +All other options (arguments beginning with \`-') are ignored. - if test "$mode" != relink; then - # Remove our outputs, but don't remove object files since they - # may have been created when compiling PIC objects. - removelist= - tempremovelist=`$echo "$output_objdir/*"` - for p in $tempremovelist; do - case $p in - *.$objext) - ;; - $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) - if test "X$precious_files_regex" != "X"; then - if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 - then - continue - fi - fi - removelist="$removelist $p" - ;; - *) ;; - esac - done - if test -n "$removelist"; then - $show "${rm}r $removelist" - $run ${rm}r $removelist - fi - fi +Every other argument is treated as a filename. Files ending in \`.la' are +treated as uninstalled libtool libraries, other files are standard or library +object files. - # Now set the variables for building old libraries. - if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then - oldlibs="$oldlibs $output_objdir/$libname.$libext" +If the OUTPUT-FILE ends in \`.la', then a libtool library is created, +only library objects (\`.lo' files) may be specified, and \`-rpath' is +required, except when creating a convenience library. - # Transform .lo files to .o files. - oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` - fi +If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created +using \`ar' and \`ranlib', or on Windows using \`lib'. - # Eliminate all temporary directories. - for path in $notinst_path; do - lib_search_path=`$echo "$lib_search_path " | ${SED} -e 's% $path % %g'` - deplibs=`$echo "$deplibs " | ${SED} -e 's% -L$path % %g'` - dependency_libs=`$echo "$dependency_libs " | ${SED} -e 's% -L$path % %g'` - done +If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file +is created, otherwise an executable program is created." + ;; - if test -n "$xrpath"; then - # If the user specified any rpath flags, then add them. - temp_xrpath= - for libdir in $xrpath; do - temp_xrpath="$temp_xrpath -R$libdir" - case "$finalize_rpath " in - *" $libdir "*) ;; - *) finalize_rpath="$finalize_rpath $libdir" ;; - esac - done - if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then - dependency_libs="$temp_xrpath $dependency_libs" - fi - fi + uninstall) + $ECHO \ +"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... - # Make sure dlfiles contains only unique files that won't be dlpreopened - old_dlfiles="$dlfiles" - dlfiles= - for lib in $old_dlfiles; do - case " $dlprefiles $dlfiles " in - *" $lib "*) ;; - *) dlfiles="$dlfiles $lib" ;; - esac - done +Remove libraries from an installation directory. - # Make sure dlprefiles contains only unique files - old_dlprefiles="$dlprefiles" - dlprefiles= - for lib in $old_dlprefiles; do - case "$dlprefiles " in - *" $lib "*) ;; - *) dlprefiles="$dlprefiles $lib" ;; - esac +RM is the name of the program to use to delete files associated with each FILE +(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +to RM. + +If FILE is a libtool library, all the files associated with it are deleted. +Otherwise, only FILE itself is deleted using RM." + ;; + + *) + func_fatal_help "invalid operation mode \`$opt_mode'" + ;; + esac + + echo + $ECHO "Try \`$progname --help' for more information about other modes." +} + +# Now that we've collected a possible --mode arg, show help if necessary +if $opt_help; then + if test "$opt_help" = :; then + func_mode_help + else + { + func_help noexit + for opt_mode in compile link execute install finish uninstall clean; do + func_mode_help done + } | sed -n '1p; 2,$s/^Usage:/ or: /p' + { + func_help noexit + for opt_mode in compile link execute install finish uninstall clean; do + echo + func_mode_help + done + } | + sed '1d + /^When reporting/,/^Report/{ + H + d + } + $x + /information about other modes/d + /more detailed .*MODE/d + s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/' + fi + exit $? +fi - if test "$build_libtool_libs" = yes; then - if test -n "$rpath"; then - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*) - # these systems don't actually have a c library (as such)! - ;; - *-*-rhapsody* | *-*-darwin1.[012]) - # Rhapsody C library is in the System framework - deplibs="$deplibs -framework System" - ;; - *-*-netbsd*) - # Don't link with libc until the a.out ld.so is fixed. - ;; - *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) - # Do not include libc due to us having libc/libc_r. - test "X$arg" = "X-lc" && continue - ;; - *) - # Add libc to deplibs on all other systems if necessary. - if test "$build_libtool_need_lc" = "yes"; then - deplibs="$deplibs -lc" - fi - ;; - esac - fi - # Transform deplibs into only deplibs that can be linked in shared. - name_save=$name - libname_save=$libname - release_save=$release - versuffix_save=$versuffix - major_save=$major - # I'm not sure if I'm treating the release correctly. I think - # release should show up in the -l (ie -lgmp5) so we don't want to - # add it in twice. Is that correct? - release="" - versuffix="" - major="" - newdeplibs= - droppeddeps=no - case $deplibs_check_method in - pass_all) - # Don't check for shared/static. Everything works. - # This might be a little naive. We might want to check - # whether the library exists or not. But this is on - # osf3 & osf4 and I'm not really sure... Just - # implementing what was already the behavior. - newdeplibs=$deplibs - ;; - test_compile) - # This code stresses the "libraries are programs" paradigm to its - # limits. Maybe even breaks it. We compile a program, linking it - # against the deplibs as a proxy for the library. Then we can check - # whether they linked in statically or dynamically with ldd. - $rm conftest.c - cat > conftest.c </dev/null` - for potent_lib in $potential_libs; do - # Follow soft links. - if ls -lLd "$potent_lib" 2>/dev/null \ - | grep " -> " >/dev/null; then - continue - fi - # The statement above tries to avoid entering an - # endless loop below, in case of cyclic links. - # We might still enter an endless loop, since a link - # loop can be closed while we follow links, - # but so what? - potlib="$potent_lib" - while test -h "$potlib" 2>/dev/null; do - potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` - case $potliblink in - [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; - *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; - esac - done - # It is ok to link against an archive when - # building a shared library. - if $AR -t $potlib > /dev/null 2>&1; then - newdeplibs="$newdeplibs $a_deplib" - a_deplib="" - break 2 - fi - if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \ - | ${SED} 10q \ - | $EGREP "$file_magic_regex" > /dev/null; then - newdeplibs="$newdeplibs $a_deplib" - a_deplib="" - break 2 - fi - done - done - fi - if test -n "$a_deplib" ; then - droppeddeps=yes - $echo - $echo "*** Warning: linker path does not have real file for library $a_deplib." - $echo "*** I have the capability to make that library automatically link in when" - $echo "*** you link to this library. But I can only do this if you have a" - $echo "*** shared version of the library, which you do not appear to have" - $echo "*** because I did check the linker path looking for a file starting" - if test -z "$potlib" ; then - $echo "*** with $libname but no candidates were found. (...for file magic test)" - else - $echo "*** with $libname and none of the candidates passed a file format test" - $echo "*** using a file magic. Last file checked: $potlib" - fi - fi - else - # Add a -L argument. - newdeplibs="$newdeplibs $a_deplib" - fi - done # Gone through all deplibs. - ;; - match_pattern*) - set dummy $deplibs_check_method - match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` - for a_deplib in $deplibs; do - name=`expr $a_deplib : '-l\(.*\)'` - # If $name is empty we are operating on a -L argument. - if test -n "$name" && test "$name" != "0"; then - if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then - case " $predeps $postdeps " in - *" $a_deplib "*) - newdeplibs="$newdeplibs $a_deplib" - a_deplib="" - ;; - esac - fi - if test -n "$a_deplib" ; then - libname=`eval \\$echo \"$libname_spec\"` - for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do - potential_libs=`ls $i/$libname[.-]* 2>/dev/null` - for potent_lib in $potential_libs; do - potlib="$potent_lib" # see symlink-check above in file_magic test - if eval $echo \"$potent_lib\" 2>/dev/null \ - | ${SED} 10q \ - | $EGREP "$match_pattern_regex" > /dev/null; then - newdeplibs="$newdeplibs $a_deplib" - a_deplib="" - break 2 - fi - done - done - fi - if test -n "$a_deplib" ; then - droppeddeps=yes - $echo - $echo "*** Warning: linker path does not have real file for library $a_deplib." - $echo "*** I have the capability to make that library automatically link in when" - $echo "*** you link to this library. But I can only do this if you have a" - $echo "*** shared version of the library, which you do not appear to have" - $echo "*** because I did check the linker path looking for a file starting" - if test -z "$potlib" ; then - $echo "*** with $libname but no candidates were found. (...for regex pattern test)" - else - $echo "*** with $libname and none of the candidates passed a file format test" - $echo "*** using a regex pattern. Last file checked: $potlib" - fi - fi - else - # Add a -L argument. - newdeplibs="$newdeplibs $a_deplib" - fi - done # Gone through all deplibs. - ;; - none | unknown | *) - newdeplibs="" - tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \ - -e 's/ -[LR][^ ]*//g'` - if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then - for i in $predeps $postdeps ; do - # can't use Xsed below, because $i might contain '/' - tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"` - done - fi - if $echo "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' \ - | grep . >/dev/null; then - $echo - if test "X$deplibs_check_method" = "Xnone"; then - $echo "*** Warning: inter-library dependencies are not supported in this platform." - else - $echo "*** Warning: inter-library dependencies are not known to be supported." - fi - $echo "*** All declared inter-library dependencies are being dropped." - droppeddeps=yes - fi - ;; - esac - versuffix=$versuffix_save - major=$major_save - release=$release_save - libname=$libname_save - name=$name_save +# func_mode_execute arg... +func_mode_execute () +{ + $opt_debug + # The first argument is the command name. + cmd="$nonopt" + test -z "$cmd" && \ + func_fatal_help "you must specify a COMMAND" - case $host in - *-*-rhapsody* | *-*-darwin1.[012]) - # On Rhapsody replace the C library is the System framework - newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'` - ;; - esac + # Handle -dlopen flags immediately. + for file in $opt_dlopen; do + test -f "$file" \ + || func_fatal_help "\`$file' is not a file" - if test "$droppeddeps" = yes; then - if test "$module" = yes; then - $echo - $echo "*** Warning: libtool could not satisfy all declared inter-library" - $echo "*** dependencies of module $libname. Therefore, libtool will create" - $echo "*** a static module, that should work as long as the dlopening" - $echo "*** application is linked with the -dlopen flag." - if test -z "$global_symbol_pipe"; then - $echo - $echo "*** However, this would only work if libtool was able to extract symbol" - $echo "*** lists from a program, using \`nm' or equivalent, but libtool could" - $echo "*** not find such a program. So, this module is probably useless." - $echo "*** \`nm' from GNU binutils and a full rebuild may help." - fi - if test "$build_old_libs" = no; then - oldlibs="$output_objdir/$libname.$libext" - build_libtool_libs=module - build_old_libs=yes - else - build_libtool_libs=no - fi - else - $echo "*** The inter-library dependencies that have been dropped here will be" - $echo "*** automatically added whenever a program is linked with this library" - $echo "*** or is declared to -dlopen it." + dir= + case $file in + *.la) + func_resolve_sysroot "$file" + file=$func_resolve_sysroot_result - if test "$allow_undefined" = no; then - $echo - $echo "*** Since this library must not contain undefined symbols," - $echo "*** because either the platform does not support them or" - $echo "*** it was explicitly requested with -no-undefined," - $echo "*** libtool will only create a static version of it." - if test "$build_old_libs" = no; then - oldlibs="$output_objdir/$libname.$libext" - build_libtool_libs=module - build_old_libs=yes - else - build_libtool_libs=no - fi - fi + # Check to see that this really is a libtool archive. + func_lalib_unsafe_p "$file" \ + || func_fatal_help "\`$lib' is not a valid libtool archive" + + # Read the libtool library. + dlname= + library_names= + func_source "$file" + + # Skip this library if it cannot be dlopened. + if test -z "$dlname"; then + # Warn if it was a shared library. + test -n "$library_names" && \ + func_warning "\`$file' was not linked with \`-export-dynamic'" + continue + fi + + func_dirname "$file" "" "." + dir="$func_dirname_result" + + if test -f "$dir/$objdir/$dlname"; then + func_append dir "/$objdir" + else + if test ! -f "$dir/$dlname"; then + func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" fi fi - # Done checking deplibs! - deplibs=$newdeplibs + ;; + + *.lo) + # Just add the directory containing the .lo file. + func_dirname "$file" "" "." + dir="$func_dirname_result" + ;; + + *) + func_warning "\`-dlopen' is ignored for non-libtool libraries and objects" + continue + ;; + esac + + # Get the absolute pathname. + absdir=`cd "$dir" && pwd` + test -n "$absdir" && dir="$absdir" + + # Now add the directory to shlibpath_var. + if eval "test -z \"\$$shlibpath_var\""; then + eval "$shlibpath_var=\"\$dir\"" + else + eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" fi + done - # All the library-specific variables (install_libdir is set above). - library_names= - old_library= - dlname= + # This variable tells wrapper scripts just to set shlibpath_var + # rather than running their programs. + libtool_execute_magic="$magic" - # Test again, we may have decided not to build it any more - if test "$build_libtool_libs" = yes; then - if test "$hardcode_into_libs" = yes; then - # Hardcode the library paths - hardcode_libdirs= - dep_rpath= - rpath="$finalize_rpath" - test "$mode" != relink && rpath="$compile_rpath$rpath" - for libdir in $rpath; do - if test -n "$hardcode_libdir_flag_spec"; then - if test -n "$hardcode_libdir_separator"; then - if test -z "$hardcode_libdirs"; then - hardcode_libdirs="$libdir" - else - # Just accumulate the unique libdirs. - case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in - *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) - ;; - *) - hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" - ;; - esac - fi - else - eval flag=\"$hardcode_libdir_flag_spec\" - dep_rpath="$dep_rpath $flag" - fi - elif test -n "$runpath_var"; then - case "$perm_rpath " in - *" $libdir "*) ;; - *) perm_rpath="$perm_rpath $libdir" ;; - esac - fi - done - # Substitute the hardcoded libdirs into the rpath. - if test -n "$hardcode_libdir_separator" && - test -n "$hardcode_libdirs"; then - libdir="$hardcode_libdirs" - if test -n "$hardcode_libdir_flag_spec_ld"; then - eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" - else - eval dep_rpath=\"$hardcode_libdir_flag_spec\" - fi - fi - if test -n "$runpath_var" && test -n "$perm_rpath"; then - # We should set the runpath_var. - rpath= - for dir in $perm_rpath; do - rpath="$rpath$dir:" - done - eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" - fi - test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" - fi - - shlibpath="$finalize_shlibpath" - test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" - if test -n "$shlibpath"; then - eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" - fi - - # Get the real and link names of the library. - eval shared_ext=\"$shrext_cmds\" - eval library_names=\"$library_names_spec\" - set dummy $library_names - realname="$2" - shift; shift - - if test -n "$soname_spec"; then - eval soname=\"$soname_spec\" - else - soname="$realname" - fi - if test -z "$dlname"; then - dlname=$soname + # Check if any of the arguments is a wrapper script. + args= + for file + do + case $file in + -* | *.la | *.lo ) ;; + *) + # Do a test to see if this is really a libtool program. + if func_ltwrapper_script_p "$file"; then + func_source "$file" + # Transform arg to wrapped name. + file="$progdir/$program" + elif func_ltwrapper_executable_p "$file"; then + func_ltwrapper_scriptname "$file" + func_source "$func_ltwrapper_scriptname_result" + # Transform arg to wrapped name. + file="$progdir/$program" fi + ;; + esac + # Quote arguments (to preserve shell metacharacters). + func_append_quoted args "$file" + done - lib="$output_objdir/$realname" - for link - do - linknames="$linknames $link" - done - - # Use standard objects if they are pic - test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + if test "X$opt_dry_run" = Xfalse; then + if test -n "$shlibpath_var"; then + # Export the shlibpath_var. + eval "export $shlibpath_var" + fi - # Prepare the list of exported symbols - if test -z "$export_symbols"; then - if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then - $show "generating symbol list for \`$libname.la'" - export_symbols="$output_objdir/$libname.exp" - $run $rm $export_symbols - cmds=$export_symbols_cmds - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - if len=`expr "X$cmd" : ".*"` && - test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then - $show "$cmd" - $run eval "$cmd" || exit $? - skipped_export=false + # Restore saved environment variables + for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES + do + eval "if test \"\${save_$lt_var+set}\" = set; then + $lt_var=\$save_$lt_var; export $lt_var else - # The command line is too long to execute in one step. - $show "using reloadable object file for export list..." - skipped_export=: - # Break out early, otherwise skipped_export may be - # set to false by a later but shorter cmd. - break - fi - done - IFS="$save_ifs" - if test -n "$export_symbols_regex"; then - $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\"" - $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' - $show "$mv \"${export_symbols}T\" \"$export_symbols\"" - $run eval '$mv "${export_symbols}T" "$export_symbols"' - fi - fi - fi + $lt_unset $lt_var + fi" + done - if test -n "$export_symbols" && test -n "$include_expsyms"; then - $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"' - fi + # Now prepare to actually exec the command. + exec_cmd="\$cmd$args" + else + # Display what would be done. + if test -n "$shlibpath_var"; then + eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" + echo "export $shlibpath_var" + fi + $ECHO "$cmd$args" + exit $EXIT_SUCCESS + fi +} - tmp_deplibs= - for test_deplib in $deplibs; do - case " $convenience " in - *" $test_deplib "*) ;; - *) - tmp_deplibs="$tmp_deplibs $test_deplib" - ;; - esac - done - deplibs="$tmp_deplibs" +test "$opt_mode" = execute && func_mode_execute ${1+"$@"} - if test -n "$convenience"; then - if test -n "$whole_archive_flag_spec"; then - save_libobjs=$libobjs - eval libobjs=\"\$libobjs $whole_archive_flag_spec\" - else - gentop="$output_objdir/${outputname}x" - generated="$generated $gentop" - func_extract_archives $gentop $convenience - libobjs="$libobjs $func_extract_archives_result" - fi - fi - - if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then - eval flag=\"$thread_safe_flag_spec\" - linker_flags="$linker_flags $flag" - fi +# func_mode_finish arg... +func_mode_finish () +{ + $opt_debug + libs= + libdirs= + admincmds= - # Make a backup of the uninstalled library when relinking - if test "$mode" = relink; then - $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $? - fi + for opt in "$nonopt" ${1+"$@"} + do + if test -d "$opt"; then + func_append libdirs " $opt" - # Do each of the archive commands. - if test "$module" = yes && test -n "$module_cmds" ; then - if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then - eval test_cmds=\"$module_expsym_cmds\" - cmds=$module_expsym_cmds - else - eval test_cmds=\"$module_cmds\" - cmds=$module_cmds - fi - else - if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then - eval test_cmds=\"$archive_expsym_cmds\" - cmds=$archive_expsym_cmds + elif test -f "$opt"; then + if func_lalib_unsafe_p "$opt"; then + func_append libs " $opt" else - eval test_cmds=\"$archive_cmds\" - cmds=$archive_cmds - fi + func_warning "\`$opt' is not a valid libtool archive" fi - if test "X$skipped_export" != "X:" && - len=`expr "X$test_cmds" : ".*" 2>/dev/null` && - test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then - : - else - # The command line is too long to link in one step, link piecewise. - $echo "creating reloadable object files..." + else + func_fatal_error "invalid argument \`$opt'" + fi + done - # Save the value of $output and $libobjs because we want to - # use them later. If we have whole_archive_flag_spec, we - # want to use save_libobjs as it was before - # whole_archive_flag_spec was expanded, because we can't - # assume the linker understands whole_archive_flag_spec. - # This may have to be revisited, in case too many - # convenience libraries get linked in and end up exceeding - # the spec. - if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then - save_libobjs=$libobjs - fi - save_output=$output - output_la=`$echo "X$output" | $Xsed -e "$basename"` + if test -n "$libs"; then + if test -n "$lt_sysroot"; then + sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"` + sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;" + else + sysroot_cmd= + fi - # Clear the reloadable object creation command queue and - # initialize k to one. - test_cmds= - concat_cmds= - objlist= - delfiles= - last_robj= - k=1 - output=$output_objdir/$output_la-${k}.$objext - # Loop over the list of objects to be linked. - for obj in $save_libobjs - do - eval test_cmds=\"$reload_cmds $objlist $last_robj\" - if test "X$objlist" = X || - { len=`expr "X$test_cmds" : ".*" 2>/dev/null` && - test "$len" -le "$max_cmd_len"; }; then - objlist="$objlist $obj" - else - # The command $test_cmds is almost too long, add a - # command to the queue. - if test "$k" -eq 1 ; then - # The first file doesn't have a previous command to add. - eval concat_cmds=\"$reload_cmds $objlist $last_robj\" - else - # All subsequent reloadable object files will link in - # the last one created. - eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\" - fi - last_robj=$output_objdir/$output_la-${k}.$objext - k=`expr $k + 1` - output=$output_objdir/$output_la-${k}.$objext - objlist=$obj - len=1 - fi - done - # Handle the remaining objects by creating one last - # reloadable object file. All subsequent reloadable object - # files will link in the last one created. - test -z "$concat_cmds" || concat_cmds=$concat_cmds~ - eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" + # Remove sysroot references + if $opt_dry_run; then + for lib in $libs; do + echo "removing references to $lt_sysroot and \`=' prefixes from $lib" + done + else + tmpdir=`func_mktempdir` + for lib in $libs; do + sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \ + > $tmpdir/tmp-la + mv -f $tmpdir/tmp-la $lib + done + ${RM}r "$tmpdir" + fi + fi - if ${skipped_export-false}; then - $show "generating symbol list for \`$libname.la'" - export_symbols="$output_objdir/$libname.exp" - $run $rm $export_symbols - libobjs=$output - # Append the command to create the export file. - eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\" - fi - - # Set up a command to remove the reloadable object files - # after they are used. - i=0 - while test "$i" -lt "$k" - do - i=`expr $i + 1` - delfiles="$delfiles $output_objdir/$output_la-${i}.$objext" - done + if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then + for libdir in $libdirs; do + if test -n "$finish_cmds"; then + # Do each command in the finish commands. + func_execute_cmds "$finish_cmds" 'admincmds="$admincmds +'"$cmd"'"' + fi + if test -n "$finish_eval"; then + # Do the single finish_eval. + eval cmds=\"$finish_eval\" + $opt_dry_run || eval "$cmds" || func_append admincmds " + $cmds" + fi + done + fi - $echo "creating a temporary reloadable object file: $output" + # Exit here if they wanted silent mode. + $opt_silent && exit $EXIT_SUCCESS - # Loop through the commands generated above and execute them. - save_ifs="$IFS"; IFS='~' - for cmd in $concat_cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" + if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then + echo "----------------------------------------------------------------------" + echo "Libraries have been installed in:" + for libdir in $libdirs; do + $ECHO " $libdir" + done + echo + echo "If you ever happen to want to link against installed libraries" + echo "in a given directory, LIBDIR, you must either use libtool, and" + echo "specify the full pathname of the library, or use the \`-LLIBDIR'" + echo "flag during linking and do at least one of the following:" + if test -n "$shlibpath_var"; then + echo " - add LIBDIR to the \`$shlibpath_var' environment variable" + echo " during execution" + fi + if test -n "$runpath_var"; then + echo " - add LIBDIR to the \`$runpath_var' environment variable" + echo " during linking" + fi + if test -n "$hardcode_libdir_flag_spec"; then + libdir=LIBDIR + eval flag=\"$hardcode_libdir_flag_spec\" - libobjs=$output - # Restore the value of output. - output=$save_output + $ECHO " - use the \`$flag' linker flag" + fi + if test -n "$admincmds"; then + $ECHO " - have your system administrator run these commands:$admincmds" + fi + if test -f /etc/ld.so.conf; then + echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" + fi + echo - if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then - eval libobjs=\"\$libobjs $whole_archive_flag_spec\" - fi - # Expand the library linking commands again to reset the - # value of $libobjs for piecewise linking. + echo "See any operating system documentation about shared libraries for" + case $host in + solaris2.[6789]|solaris2.1[0-9]) + echo "more information, such as the ld(1), crle(1) and ld.so(8) manual" + echo "pages." + ;; + *) + echo "more information, such as the ld(1) and ld.so(8) manual pages." + ;; + esac + echo "----------------------------------------------------------------------" + fi + exit $EXIT_SUCCESS +} - # Do each of the archive commands. - if test "$module" = yes && test -n "$module_cmds" ; then - if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then - cmds=$module_expsym_cmds - else - cmds=$module_cmds - fi - else - if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then - cmds=$archive_expsym_cmds - else - cmds=$archive_cmds - fi - fi +test "$opt_mode" = finish && func_mode_finish ${1+"$@"} - # Append the command to remove the reloadable object files - # to the just-reset $cmds. - eval cmds=\"\$cmds~\$rm $delfiles\" - fi - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - $show "$cmd" - $run eval "$cmd" || { - lt_exit=$? - # Restore the uninstalled library and exit - if test "$mode" = relink; then - $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)' - fi +# func_mode_install arg... +func_mode_install () +{ + $opt_debug + # There may be an optional sh(1) argument at the beginning of + # install_prog (especially on Windows NT). + if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || + # Allow the use of GNU shtool's install command. + case $nonopt in *shtool*) :;; *) false;; esac; then + # Aesthetically quote it. + func_quote_for_eval "$nonopt" + install_prog="$func_quote_for_eval_result " + arg=$1 + shift + else + install_prog= + arg=$nonopt + fi - exit $lt_exit - } - done - IFS="$save_ifs" - - # Restore the uninstalled library and exit - if test "$mode" = relink; then - $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $? + # The real first argument should be the name of the installation program. + # Aesthetically quote it. + func_quote_for_eval "$arg" + func_append install_prog "$func_quote_for_eval_result" + install_shared_prog=$install_prog + case " $install_prog " in + *[\\\ /]cp\ *) install_cp=: ;; + *) install_cp=false ;; + esac - if test -n "$convenience"; then - if test -z "$whole_archive_flag_spec"; then - $show "${rm}r $gentop" - $run ${rm}r "$gentop" - fi - fi + # We need to accept at least all the BSD install flags. + dest= + files= + opts= + prev= + install_type= + isdir=no + stripme= + no_mode=: + for arg + do + arg2= + if test -n "$dest"; then + func_append files " $dest" + dest=$arg + continue + fi - exit $EXIT_SUCCESS + case $arg in + -d) isdir=yes ;; + -f) + if $install_cp; then :; else + prev=$arg fi - - # Create links to the real library. - for linkname in $linknames; do - if test "$realname" != "$linkname"; then - $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)" - $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $? + ;; + -g | -m | -o) + prev=$arg + ;; + -s) + stripme=" -s" + continue + ;; + -*) + ;; + *) + # If the previous option needed an argument, then skip it. + if test -n "$prev"; then + if test "x$prev" = x-m && test -n "$install_override_mode"; then + arg2=$install_override_mode + no_mode=false fi - done - - # If -module or -export-dynamic was specified, set the dlname. - if test "$module" = yes || test "$export_dynamic" = yes; then - # On all known operating systems, these are identical. - dlname="$soname" + prev= + else + dest=$arg + continue fi - fi - ;; + ;; + esac - obj) - if test -n "$deplibs"; then - $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2 + # Aesthetically quote the argument. + func_quote_for_eval "$arg" + func_append install_prog " $func_quote_for_eval_result" + if test -n "$arg2"; then + func_quote_for_eval "$arg2" fi + func_append install_shared_prog " $func_quote_for_eval_result" + done - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2 - fi + test -z "$install_prog" && \ + func_fatal_help "you must specify an install program" - if test -n "$rpath"; then - $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2 - fi + test -n "$prev" && \ + func_fatal_help "the \`$prev' option requires an argument" - if test -n "$xrpath"; then - $echo "$modename: warning: \`-R' is ignored for objects" 1>&2 + if test -n "$install_override_mode" && $no_mode; then + if $install_cp; then :; else + func_quote_for_eval "$install_override_mode" + func_append install_shared_prog " -m $func_quote_for_eval_result" fi + fi - if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2 + if test -z "$files"; then + if test -z "$dest"; then + func_fatal_help "no file or destination specified" + else + func_fatal_help "you must specify a destination" fi + fi - if test -n "$release"; then - $echo "$modename: warning: \`-release' is ignored for objects" 1>&2 - fi + # Strip any trailing slash from the destination. + func_stripname '' '/' "$dest" + dest=$func_stripname_result - case $output in - *.lo) - if test -n "$objs$old_deplibs"; then - $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2 - exit $EXIT_FAILURE - fi - libobj="$output" - obj=`$echo "X$output" | $Xsed -e "$lo2o"` - ;; - *) - libobj= - obj="$output" + # Check to see that the destination is a directory. + test -d "$dest" && isdir=yes + if test "$isdir" = yes; then + destdir="$dest" + destname= + else + func_dirname_and_basename "$dest" "" "." + destdir="$func_dirname_result" + destname="$func_basename_result" + + # Not a directory, so check to see that there is only one file specified. + set dummy $files; shift + test "$#" -gt 1 && \ + func_fatal_help "\`$dest' is not a directory" + fi + case $destdir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + for file in $files; do + case $file in + *.lo) ;; + *) + func_fatal_help "\`$destdir' must be an absolute directory name" + ;; + esac + done + ;; + esac + + # This variable tells wrapper scripts just to set variables rather + # than running their programs. + libtool_install_magic="$magic" + + staticlibs= + future_libdirs= + current_libdirs= + for file in $files; do + + # Do each installation. + case $file in + *.$libext) + # Do the static libraries later. + func_append staticlibs " $file" ;; - esac - # Delete the old objects. - $run $rm $obj $libobj + *.la) + func_resolve_sysroot "$file" + file=$func_resolve_sysroot_result - # Objects from convenience libraries. This assumes - # single-version convenience libraries. Whenever we create - # different ones for PIC/non-PIC, this we'll have to duplicate - # the extraction. - reload_conv_objs= - gentop= - # reload_cmds runs $LD directly, so let us get rid of - # -Wl from whole_archive_flag_spec - wl= + # Check to see that this really is a libtool archive. + func_lalib_unsafe_p "$file" \ + || func_fatal_help "\`$file' is not a valid libtool archive" - if test -n "$convenience"; then - if test -n "$whole_archive_flag_spec"; then - eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\" - else - gentop="$output_objdir/${obj}x" - generated="$generated $gentop" + library_names= + old_library= + relink_command= + func_source "$file" - func_extract_archives $gentop $convenience - reload_conv_objs="$reload_objs $func_extract_archives_result" + # Add the libdir to current_libdirs if it is the destination. + if test "X$destdir" = "X$libdir"; then + case "$current_libdirs " in + *" $libdir "*) ;; + *) func_append current_libdirs " $libdir" ;; + esac + else + # Note the libdir as a future libdir. + case "$future_libdirs " in + *" $libdir "*) ;; + *) func_append future_libdirs " $libdir" ;; + esac fi - fi - # Create the old-style object. - reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test + func_dirname "$file" "/" "" + dir="$func_dirname_result" + func_append dir "$objdir" - output="$obj" - cmds=$reload_cmds - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" + if test -n "$relink_command"; then + # Determine the prefix the user has applied to our future dir. + inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"` - # Exit if we aren't doing a library object file. - if test -z "$libobj"; then - if test -n "$gentop"; then - $show "${rm}r $gentop" - $run ${rm}r $gentop - fi + # Don't allow the user to place us outside of our expected + # location b/c this prevents finding dependent libraries that + # are installed to the same prefix. + # At present, this check doesn't affect windows .dll's that + # are installed into $libdir/../bin (currently, that works fine) + # but it's something to keep an eye on. + test "$inst_prefix_dir" = "$destdir" && \ + func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir" - exit $EXIT_SUCCESS - fi + if test -n "$inst_prefix_dir"; then + # Stick the inst_prefix_dir data into the link command. + relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` + else + relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"` + fi - if test "$build_libtool_libs" != yes; then - if test -n "$gentop"; then - $show "${rm}r $gentop" - $run ${rm}r $gentop + func_warning "relinking \`$file'" + func_show_eval "$relink_command" \ + 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"' fi - # Create an invalid libtool object if no PIC, so that we don't - # accidentally link it into a program. - # $show "echo timestamp > $libobj" - # $run eval "echo timestamp > $libobj" || exit $? - exit $EXIT_SUCCESS - fi + # See the names of the shared library. + set dummy $library_names; shift + if test -n "$1"; then + realname="$1" + shift - if test -n "$pic_flag" || test "$pic_mode" != default; then - # Only do commands if we really have different PIC objects. - reload_objs="$libobjs $reload_conv_objs" - output="$libobj" - cmds=$reload_cmds - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - fi + srcname="$realname" + test -n "$relink_command" && srcname="$realname"T - if test -n "$gentop"; then - $show "${rm}r $gentop" - $run ${rm}r $gentop - fi + # Install the shared library and build the symlinks. + func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \ + 'exit $?' + tstripme="$stripme" + case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + case $realname in + *.dll.a) + tstripme="" + ;; + esac + ;; + esac + if test -n "$tstripme" && test -n "$striplib"; then + func_show_eval "$striplib $destdir/$realname" 'exit $?' + fi - exit $EXIT_SUCCESS - ;; + if test "$#" -gt 0; then + # Delete the old symlinks, and create new ones. + # Try `ln -sf' first, because the `ln' binary might depend on + # the symlink we replace! Solaris /bin/ln does not understand -f, + # so we also need to try rm && ln -s. + for linkname + do + test "$linkname" != "$realname" \ + && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })" + done + fi - prog) - case $host in - *cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;; - esac - if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2 - fi + # Do each command in the postinstall commands. + lib="$destdir/$realname" + func_execute_cmds "$postinstall_cmds" 'exit $?' + fi - if test -n "$release"; then - $echo "$modename: warning: \`-release' is ignored for programs" 1>&2 - fi + # Install the pseudo-library for information purposes. + func_basename "$file" + name="$func_basename_result" + instname="$dir/$name"i + func_show_eval "$install_prog $instname $destdir/$name" 'exit $?' + + # Maybe install the static library, too. + test -n "$old_library" && func_append staticlibs " $dir/$old_library" + ;; - if test "$preload" = yes; then - if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown && - test "$dlopen_self_static" = unknown; then - $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support." + *.lo) + # Install (i.e. copy) a libtool object. + + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile="$destdir/$destname" + else + func_basename "$file" + destfile="$func_basename_result" + destfile="$destdir/$destfile" fi - fi - case $host in - *-*-rhapsody* | *-*-darwin1.[012]) - # On Rhapsody replace the C library is the System framework - compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'` - finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'` - ;; - esac + # Deduce the name of the destination old-style object file. + case $destfile in + *.lo) + func_lo2o "$destfile" + staticdest=$func_lo2o_result + ;; + *.$objext) + staticdest="$destfile" + destfile= + ;; + *) + func_fatal_help "cannot copy a libtool object to \`$destfile'" + ;; + esac - case $host in - *darwin*) - # Don't allow lazy linking, it breaks C++ global constructors - if test "$tagname" = CXX ; then - compile_command="$compile_command ${wl}-bind_at_load" - finalize_command="$finalize_command ${wl}-bind_at_load" - fi - ;; - esac + # Install the libtool object if requested. + test -n "$destfile" && \ + func_show_eval "$install_prog $file $destfile" 'exit $?' - compile_command="$compile_command $compile_deplibs" - finalize_command="$finalize_command $finalize_deplibs" + # Install the old object if enabled. + if test "$build_old_libs" = yes; then + # Deduce the name of the old-style object file. + func_lo2o "$file" + staticobj=$func_lo2o_result + func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?' + fi + exit $EXIT_SUCCESS + ;; - if test -n "$rpath$xrpath"; then - # If the user specified any rpath flags, then add them. - for libdir in $rpath $xrpath; do - # This is the magic to use -rpath. - case "$finalize_rpath " in - *" $libdir "*) ;; - *) finalize_rpath="$finalize_rpath $libdir" ;; - esac - done - fi + *) + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile="$destdir/$destname" + else + func_basename "$file" + destfile="$func_basename_result" + destfile="$destdir/$destfile" + fi - # Now hardcode the library paths - rpath= - hardcode_libdirs= - for libdir in $compile_rpath $finalize_rpath; do - if test -n "$hardcode_libdir_flag_spec"; then - if test -n "$hardcode_libdir_separator"; then - if test -z "$hardcode_libdirs"; then - hardcode_libdirs="$libdir" - else - # Just accumulate the unique libdirs. - case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in - *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) - ;; - *) - hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" - ;; - esac + # If the file is missing, and there is a .exe on the end, strip it + # because it is most likely a libtool script we actually want to + # install + stripped_ext="" + case $file in + *.exe) + if test ! -f "$file"; then + func_stripname '' '.exe' "$file" + file=$func_stripname_result + stripped_ext=".exe" fi - else - eval flag=\"$hardcode_libdir_flag_spec\" - rpath="$rpath $flag" - fi - elif test -n "$runpath_var"; then - case "$perm_rpath " in - *" $libdir "*) ;; - *) perm_rpath="$perm_rpath $libdir" ;; - esac - fi - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) - case :$dllsearchpath: in - *":$libdir:"*) ;; - *) dllsearchpath="$dllsearchpath:$libdir";; - esac - ;; + ;; esac - done - # Substitute the hardcoded libdirs into the rpath. - if test -n "$hardcode_libdir_separator" && - test -n "$hardcode_libdirs"; then - libdir="$hardcode_libdirs" - eval rpath=\" $hardcode_libdir_flag_spec\" - fi - compile_rpath="$rpath" - rpath= - hardcode_libdirs= - for libdir in $finalize_rpath; do - if test -n "$hardcode_libdir_flag_spec"; then - if test -n "$hardcode_libdir_separator"; then - if test -z "$hardcode_libdirs"; then - hardcode_libdirs="$libdir" + # Do a test to see if this is really a libtool program. + case $host in + *cygwin* | *mingw*) + if func_ltwrapper_executable_p "$file"; then + func_ltwrapper_scriptname "$file" + wrapper=$func_ltwrapper_scriptname_result else - # Just accumulate the unique libdirs. - case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in - *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) - ;; - *) - hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" - ;; - esac + func_stripname '' '.exe' "$file" + wrapper=$func_stripname_result + fi + ;; + *) + wrapper=$file + ;; + esac + if func_ltwrapper_script_p "$wrapper"; then + notinst_deplibs= + relink_command= + + func_source "$wrapper" + + # Check the variables that should have been set. + test -z "$generated_by_libtool_version" && \ + func_fatal_error "invalid libtool wrapper script \`$wrapper'" + + finalize=yes + for lib in $notinst_deplibs; do + # Check to see that each library is installed. + libdir= + if test -f "$lib"; then + func_source "$lib" + fi + libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test + if test -n "$libdir" && test ! -f "$libfile"; then + func_warning "\`$lib' has not been installed in \`$libdir'" + finalize=no fi + done + + relink_command= + func_source "$wrapper" + + outputname= + if test "$fast_install" = no && test -n "$relink_command"; then + $opt_dry_run || { + if test "$finalize" = yes; then + tmpdir=`func_mktempdir` + func_basename "$file$stripped_ext" + file="$func_basename_result" + outputname="$tmpdir/$file" + # Replace the output file specification. + relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'` + + $opt_silent || { + func_quote_for_expand "$relink_command" + eval "func_echo $func_quote_for_expand_result" + } + if eval "$relink_command"; then : + else + func_error "error: relink \`$file' with the above command before installing it" + $opt_dry_run || ${RM}r "$tmpdir" + continue + fi + file="$outputname" + else + func_warning "cannot relink \`$file'" + fi + } else - eval flag=\"$hardcode_libdir_flag_spec\" - rpath="$rpath $flag" + # Install the binary that we compiled earlier. + file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"` fi - elif test -n "$runpath_var"; then - case "$finalize_perm_rpath " in - *" $libdir "*) ;; - *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; + fi + + # remove .exe since cygwin /usr/bin/install will append another + # one anyway + case $install_prog,$host in + */usr/bin/install*,*cygwin*) + case $file:$destfile in + *.exe:*.exe) + # this is ok + ;; + *.exe:*) + destfile=$destfile.exe + ;; + *:*.exe) + func_stripname '' '.exe' "$destfile" + destfile=$func_stripname_result + ;; esac + ;; + esac + func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?' + $opt_dry_run || if test -n "$outputname"; then + ${RM}r "$tmpdir" fi - done - # Substitute the hardcoded libdirs into the rpath. - if test -n "$hardcode_libdir_separator" && - test -n "$hardcode_libdirs"; then - libdir="$hardcode_libdirs" - eval rpath=\" $hardcode_libdir_flag_spec\" - fi - finalize_rpath="$rpath" + ;; + esac + done - if test -n "$libobjs" && test "$build_old_libs" = yes; then - # Transform all the library objects into standard objects. - compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + for file in $staticlibs; do + func_basename "$file" + name="$func_basename_result" + + # Set up the ranlib parameters. + oldlib="$destdir/$name" + func_to_tool_file "$oldlib" func_convert_file_msys_to_w32 + tool_oldlib=$func_to_tool_file_result + + func_show_eval "$install_prog \$file \$oldlib" 'exit $?' + + if test -n "$stripme" && test -n "$old_striplib"; then + func_show_eval "$old_striplib $tool_oldlib" 'exit $?' fi - dlsyms= - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - if test -n "$NM" && test -n "$global_symbol_pipe"; then - dlsyms="${outputname}S.c" - else - $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2 - fi + # Do each command in the postinstall commands. + func_execute_cmds "$old_postinstall_cmds" 'exit $?' + done + + test -n "$future_libdirs" && \ + func_warning "remember to run \`$progname --finish$future_libdirs'" + + if test -n "$current_libdirs"; then + # Maybe just do a dry run. + $opt_dry_run && current_libdirs=" -n$current_libdirs" + exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' + else + exit $EXIT_SUCCESS + fi +} + +test "$opt_mode" = install && func_mode_install ${1+"$@"} + + +# func_generate_dlsyms outputname originator pic_p +# Extract symbols from dlprefiles and create ${outputname}S.o with +# a dlpreopen symbol table. +func_generate_dlsyms () +{ + $opt_debug + my_outputname="$1" + my_originator="$2" + my_pic_p="${3-no}" + my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'` + my_dlsyms= + + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + if test -n "$NM" && test -n "$global_symbol_pipe"; then + my_dlsyms="${my_outputname}S.c" + else + func_error "not configured to extract global symbols from dlpreopened files" fi + fi - if test -n "$dlsyms"; then - case $dlsyms in - "") ;; - *.c) - # Discover the nlist of each of the dlfiles. - nlist="$output_objdir/${outputname}.nm" + if test -n "$my_dlsyms"; then + case $my_dlsyms in + "") ;; + *.c) + # Discover the nlist of each of the dlfiles. + nlist="$output_objdir/${my_outputname}.nm" - $show "$rm $nlist ${nlist}S ${nlist}T" - $run $rm "$nlist" "${nlist}S" "${nlist}T" + func_show_eval "$RM $nlist ${nlist}S ${nlist}T" - # Parse the name list into a source file. - $show "creating $output_objdir/$dlsyms" + # Parse the name list into a source file. + func_verbose "creating $output_objdir/$my_dlsyms" - test -z "$run" && $echo > "$output_objdir/$dlsyms" "\ -/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */ -/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */ + $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\ +/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */ +/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */ #ifdef __cplusplus extern \"C\" { #endif -/* Prevent the only kind of declaration conflicts we can make. */ -#define lt_preloaded_symbols some_other_symbol +#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4)) +#pragma GCC diagnostic ignored \"-Wstrict-prototypes\" +#endif + +/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ +#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) +/* DATA imports from DLLs on WIN32 con't be const, because runtime + relocations are performed -- see ld's documentation on pseudo-relocs. */ +# define LT_DLSYM_CONST +#elif defined(__osf__) +/* This system does not cope well with relocations in const data. */ +# define LT_DLSYM_CONST +#else +# define LT_DLSYM_CONST const +#endif /* External symbol declarations for the compiler. */\ " - if test "$dlself" = yes; then - $show "generating symbol list for \`$output'" - - test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist" - - # Add our own program objects to the symbol list. - progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - for arg in $progfiles; do - $show "extracting global C symbols from \`$arg'" - $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" - done - - if test -n "$exclude_expsyms"; then - $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' - $run eval '$mv "$nlist"T "$nlist"' - fi - - if test -n "$export_symbols_regex"; then - $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' - $run eval '$mv "$nlist"T "$nlist"' - fi + if test "$dlself" = yes; then + func_verbose "generating symbol list for \`$output'" - # Prepare the list of exported symbols - if test -z "$export_symbols"; then - export_symbols="$output_objdir/$outputname.exp" - $run $rm $export_symbols - $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' - else - $run eval "${SED} -e 's/\([ ][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' - $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' - $run eval 'mv "$nlist"T "$nlist"' - fi - fi + $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist" - for arg in $dlprefiles; do - $show "extracting global C symbols from \`$arg'" - name=`$echo "$arg" | ${SED} -e 's%^.*/%%'` - $run eval '$echo ": $name " >> "$nlist"' - $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" + # Add our own program objects to the symbol list. + progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP` + for progfile in $progfiles; do + func_to_tool_file "$progfile" func_convert_file_msys_to_w32 + func_verbose "extracting global C symbols from \`$func_to_tool_file_result'" + $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'" done - if test -z "$run"; then - # Make sure we have at least an empty file. - test -f "$nlist" || : > "$nlist" - - if test -n "$exclude_expsyms"; then - $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T - $mv "$nlist"T "$nlist" - fi - - # Try sorting and uniquifying the output. - if grep -v "^: " < "$nlist" | - if sort -k 3 /dev/null 2>&1; then - sort -k 3 - else - sort +2 - fi | - uniq > "$nlist"S; then - : - else - grep -v "^: " < "$nlist" > "$nlist"S - fi + if test -n "$exclude_expsyms"; then + $opt_dry_run || { + eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' + eval '$MV "$nlist"T "$nlist"' + } + fi - if test -f "$nlist"S; then - eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"' - else - $echo '/* NONE */' >> "$output_objdir/$dlsyms" - fi + if test -n "$export_symbols_regex"; then + $opt_dry_run || { + eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' + eval '$MV "$nlist"T "$nlist"' + } + fi - $echo >> "$output_objdir/$dlsyms" "\ + # Prepare the list of exported symbols + if test -z "$export_symbols"; then + export_symbols="$output_objdir/$outputname.exp" + $opt_dry_run || { + $RM $export_symbols + eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' + case $host in + *cygwin* | *mingw* | *cegcc* ) + eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' + eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' + ;; + esac + } + else + $opt_dry_run || { + eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' + eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' + eval '$MV "$nlist"T "$nlist"' + case $host in + *cygwin* | *mingw* | *cegcc* ) + eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' + eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' + ;; + esac + } + fi + fi -#undef lt_preloaded_symbols + for dlprefile in $dlprefiles; do + func_verbose "extracting global C symbols from \`$dlprefile'" + func_basename "$dlprefile" + name="$func_basename_result" + case $host in + *cygwin* | *mingw* | *cegcc* ) + # if an import library, we need to obtain dlname + if func_win32_import_lib_p "$dlprefile"; then + func_tr_sh "$dlprefile" + eval "curr_lafile=\$libfile_$func_tr_sh_result" + dlprefile_dlbasename="" + if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then + # Use subshell, to avoid clobbering current variable values + dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"` + if test -n "$dlprefile_dlname" ; then + func_basename "$dlprefile_dlname" + dlprefile_dlbasename="$func_basename_result" + else + # no lafile. user explicitly requested -dlpreopen . + $sharedlib_from_linklib_cmd "$dlprefile" + dlprefile_dlbasename=$sharedlib_from_linklib_result + fi + fi + $opt_dry_run || { + if test -n "$dlprefile_dlbasename" ; then + eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"' + else + func_warning "Could not compute DLL name from $name" + eval '$ECHO ": $name " >> "$nlist"' + fi + func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 + eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe | + $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'" + } + else # not an import lib + $opt_dry_run || { + eval '$ECHO ": $name " >> "$nlist"' + func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 + eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" + } + fi + ;; + *) + $opt_dry_run || { + eval '$ECHO ": $name " >> "$nlist"' + func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 + eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" + } + ;; + esac + done -#if defined (__STDC__) && __STDC__ -# define lt_ptr void * -#else -# define lt_ptr char * -# define const -#endif + $opt_dry_run || { + # Make sure we have at least an empty file. + test -f "$nlist" || : > "$nlist" + + if test -n "$exclude_expsyms"; then + $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T + $MV "$nlist"T "$nlist" + fi -/* The mapping between symbol names and symbols. */ -" + # Try sorting and uniquifying the output. + if $GREP -v "^: " < "$nlist" | + if sort -k 3 /dev/null 2>&1; then + sort -k 3 + else + sort +2 + fi | + uniq > "$nlist"S; then + : + else + $GREP -v "^: " < "$nlist" > "$nlist"S + fi - case $host in - *cygwin* | *mingw* ) - $echo >> "$output_objdir/$dlsyms" "\ -/* DATA imports from DLLs on WIN32 can't be const, because - runtime relocations are performed -- see ld's documentation - on pseudo-relocs */ -struct { -" - ;; - * ) - $echo >> "$output_objdir/$dlsyms" "\ -const struct { -" - ;; - esac + if test -f "$nlist"S; then + eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"' + else + echo '/* NONE */' >> "$output_objdir/$my_dlsyms" + fi + echo >> "$output_objdir/$my_dlsyms" "\ - $echo >> "$output_objdir/$dlsyms" "\ +/* The mapping between symbol names and symbols. */ +typedef struct { const char *name; - lt_ptr address; -} -lt_preloaded_symbols[] = + void *address; +} lt_dlsymlist; +extern LT_DLSYM_CONST lt_dlsymlist +lt_${my_prefix}_LTX_preloaded_symbols[]; +LT_DLSYM_CONST lt_dlsymlist +lt_${my_prefix}_LTX_preloaded_symbols[] = {\ -" + { \"$my_originator\", (void *) 0 }," - eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms" - - $echo >> "$output_objdir/$dlsyms" "\ - {0, (lt_ptr) 0} + case $need_lib_prefix in + no) + eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms" + ;; + *) + eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms" + ;; + esac + echo >> "$output_objdir/$my_dlsyms" "\ + {0, (void *) 0} }; /* This works around a problem in FreeBSD linker */ #ifdef FREEBSD_WORKAROUND static const void *lt_preloaded_setup() { - return lt_preloaded_symbols; + return lt_${my_prefix}_LTX_preloaded_symbols; } #endif @@ -4541,430 +3461,387 @@ static const void *lt_preloaded_setup() } #endif\ " - fi + } # !$opt_dry_run - pic_flag_for_symtable= + pic_flag_for_symtable= + case "$compile_command " in + *" -static "*) ;; + *) case $host in # compiling the symbol table file with pic_flag works around # a FreeBSD bug that causes programs to crash when -lm is # linked before any other PIC object. But we must not use # pic_flag when linking with -static. The problem exists in # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. - *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) - case "$compile_command " in - *" -static "*) ;; - *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";; - esac;; + *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) + pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;; *-*-hpux*) - case "$compile_command " in - *" -static "*) ;; - *) pic_flag_for_symtable=" $pic_flag";; - esac + pic_flag_for_symtable=" $pic_flag" ;; + *) + if test "X$my_pic_p" != Xno; then + pic_flag_for_symtable=" $pic_flag" + fi + ;; esac - - # Now compile the dynamic symbol file. - $show "(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")" - $run eval '(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $? - - # Clean up the generated files. - $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T" - $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T" - - # Transform the symbol file into the correct name. - compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` - finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` - ;; - *) - $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2 - exit $EXIT_FAILURE ;; esac - else - # We keep going just in case the user didn't refer to - # lt_preloaded_symbols. The linker will fail if global_symbol_pipe - # really was required. - - # Nullify the symbol file. - compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` - finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` - fi - - if test "$need_relink" = no || test "$build_libtool_libs" != yes; then - # Replace the output file specification. - compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` - link_command="$compile_command$compile_rpath" - - # We have no uninstalled library dependencies, so finalize right now. - $show "$link_command" - $run eval "$link_command" - status=$? + symtab_cflags= + for arg in $LTCFLAGS; do + case $arg in + -pie | -fpie | -fPIE) ;; + *) func_append symtab_cflags " $arg" ;; + esac + done - # Delete the generated files. - if test -n "$dlsyms"; then - $show "$rm $output_objdir/${outputname}S.${objext}" - $run $rm "$output_objdir/${outputname}S.${objext}" - fi + # Now compile the dynamic symbol file. + func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?' - exit $status - fi + # Clean up the generated files. + func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"' - if test -n "$shlibpath_var"; then - # We should set the shlibpath_var - rpath= - for dir in $temp_rpath; do - case $dir in - [\\/]* | [A-Za-z]:[\\/]*) - # Absolute path. - rpath="$rpath$dir:" - ;; - *) - # Relative path: add a thisdir entry. - rpath="$rpath\$thisdir/$dir:" - ;; - esac - done - temp_rpath="$rpath" - fi - - if test -n "$compile_shlibpath$finalize_shlibpath"; then - compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" - fi - if test -n "$finalize_shlibpath"; then - finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" - fi - - compile_var= - finalize_var= - if test -n "$runpath_var"; then - if test -n "$perm_rpath"; then - # We should set the runpath_var. - rpath= - for dir in $perm_rpath; do - rpath="$rpath$dir:" - done - compile_var="$runpath_var=\"$rpath\$$runpath_var\" " - fi - if test -n "$finalize_perm_rpath"; then - # We should set the runpath_var. - rpath= - for dir in $finalize_perm_rpath; do - rpath="$rpath$dir:" - done - finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " - fi - fi - - if test "$no_install" = yes; then - # We don't need to create a wrapper script. - link_command="$compile_var$compile_command$compile_rpath" - # Replace the output file specification. - link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` - # Delete the old output file. - $run $rm $output - # Link the executable and exit - $show "$link_command" - $run eval "$link_command" || exit $? - exit $EXIT_SUCCESS - fi - - if test "$hardcode_action" = relink; then - # Fast installation is not supported - link_command="$compile_var$compile_command$compile_rpath" - relink_command="$finalize_var$finalize_command$finalize_rpath" - - $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2 - $echo "$modename: \`$output' will be relinked during installation" 1>&2 - else - if test "$fast_install" != no; then - link_command="$finalize_var$compile_command$finalize_rpath" - if test "$fast_install" = yes; then - relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` - else - # fast_install is set to needless - relink_command= - fi - else - link_command="$compile_var$compile_command$compile_rpath" - relink_command="$finalize_var$finalize_command$finalize_rpath" - fi - fi - - # Replace the output file specification. - link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` - - # Delete the old output files. - $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname - - $show "$link_command" - $run eval "$link_command" || exit $? - - # Now create the wrapper script. - $show "creating $output" - - # Quote the relink command for shipping. - if test -n "$relink_command"; then - # Preserve any variables that may affect compiler behavior - for var in $variables_saved_for_relink; do - if eval test -z \"\${$var+set}\"; then - relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" - elif eval var_value=\$$var; test -z "$var_value"; then - relink_command="$var=; export $var; $relink_command" + # Transform the symbol file into the correct name. + symfileobj="$output_objdir/${my_outputname}S.$objext" + case $host in + *cygwin* | *mingw* | *cegcc* ) + if test -f "$output_objdir/$my_outputname.def"; then + compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` else - var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` - relink_command="$var=\"$var_value\"; export $var; $relink_command" + compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` fi - done - relink_command="(cd `pwd`; $relink_command)" - relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` - fi - - # Quote $echo for shipping. - if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then - case $progpath in - [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";; - *) qecho="$SHELL `pwd`/$progpath --fallback-echo";; - esac - qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"` - else - qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"` - fi - - # Only actually do things if our run command is non-null. - if test -z "$run"; then - # win32 will think the script is a binary if it has - # a .exe suffix, so we strip it off here. - case $output in - *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;; - esac - # test for cygwin because mv fails w/o .exe extensions - case $host in - *cygwin*) - exeext=.exe - outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;; - *) exeext= ;; + ;; + *) + compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` + ;; esac - case $host in - *cygwin* | *mingw* ) - cwrappersource=`$echo ${objdir}/lt-${outputname}.c` - cwrapper=`$echo ${output}.exe` - $rm $cwrappersource $cwrapper - trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 - - cat > $cwrappersource <> $cwrappersource<<"EOF" -#include -#include -#include -#include -#include -#include - -#if defined(PATH_MAX) -# define LT_PATHMAX PATH_MAX -#elif defined(MAXPATHLEN) -# define LT_PATHMAX MAXPATHLEN -#else -# define LT_PATHMAX 1024 -#endif - -#ifndef DIR_SEPARATOR -#define DIR_SEPARATOR '/' -#endif - -#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ - defined (__OS2__) -#define HAVE_DOS_BASED_FILE_SYSTEM -#ifndef DIR_SEPARATOR_2 -#define DIR_SEPARATOR_2 '\\' -#endif -#endif - -#ifndef DIR_SEPARATOR_2 -# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) -#else /* DIR_SEPARATOR_2 */ -# define IS_DIR_SEPARATOR(ch) \ - (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) -#endif /* DIR_SEPARATOR_2 */ - -#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) -#define XFREE(stale) do { \ - if (stale) { free ((void *) stale); stale = 0; } \ -} while (0) - -const char *program_name = NULL; - -void * xmalloc (size_t num); -char * xstrdup (const char *string); -char * basename (const char *name); -char * fnqualify(const char *path); -char * strendzap(char *str, const char *pat); -void lt_fatal (const char *message, ...); + ;; + *) + func_fatal_error "unknown suffix for \`$my_dlsyms'" + ;; + esac + else + # We keep going just in case the user didn't refer to + # lt_preloaded_symbols. The linker will fail if global_symbol_pipe + # really was required. + + # Nullify the symbol file. + compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"` + fi +} -int -main (int argc, char *argv[]) +# func_win32_libid arg +# return the library type of file 'arg' +# +# Need a lot of goo to handle *both* DLLs and import libs +# Has to be a shell function in order to 'eat' the argument +# that is supplied when $file_magic_command is called. +# Despite the name, also deal with 64 bit binaries. +func_win32_libid () { - char **newargz; - int i; - - program_name = (char *) xstrdup ((char *) basename (argv[0])); - newargz = XMALLOC(char *, argc+2); -EOF - - cat >> $cwrappersource <> $cwrappersource <<"EOF" - newargz[1] = fnqualify(argv[0]); - /* we know the script has the same name, without the .exe */ - /* so make sure newargz[1] doesn't end in .exe */ - strendzap(newargz[1],".exe"); - for (i = 1; i < argc; i++) - newargz[i+1] = xstrdup(argv[i]); - newargz[argc+1] = NULL; -EOF - - cat >> $cwrappersource <> $cwrappersource <<"EOF" - return 127; + $opt_debug + win32_libid_type="unknown" + win32_fileres=`file -L $1 2>/dev/null` + case $win32_fileres in + *ar\ archive\ import\ library*) # definitely import + win32_libid_type="x86 archive import" + ;; + *ar\ archive*) # could be an import, or static + # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD. + if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | + $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then + func_to_tool_file "$1" func_convert_file_msys_to_w32 + win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" | + $SED -n -e ' + 1,100{ + / I /{ + s,.*,import, + p + q + } + }'` + case $win32_nmres in + import*) win32_libid_type="x86 archive import";; + *) win32_libid_type="x86 archive static";; + esac + fi + ;; + *DLL*) + win32_libid_type="x86 DLL" + ;; + *executable*) # but shell scripts are "executable" too... + case $win32_fileres in + *MS\ Windows\ PE\ Intel*) + win32_libid_type="x86 DLL" + ;; + esac + ;; + esac + $ECHO "$win32_libid_type" } -void * -xmalloc (size_t num) +# func_cygming_dll_for_implib ARG +# +# Platform-specific function to extract the +# name of the DLL associated with the specified +# import library ARG. +# Invoked by eval'ing the libtool variable +# $sharedlib_from_linklib_cmd +# Result is available in the variable +# $sharedlib_from_linklib_result +func_cygming_dll_for_implib () { - void * p = (void *) malloc (num); - if (!p) - lt_fatal ("Memory exhausted"); - - return p; + $opt_debug + sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"` } -char * -xstrdup (const char *string) +# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs +# +# The is the core of a fallback implementation of a +# platform-specific function to extract the name of the +# DLL associated with the specified import library LIBNAME. +# +# SECTION_NAME is either .idata$6 or .idata$7, depending +# on the platform and compiler that created the implib. +# +# Echos the name of the DLL associated with the +# specified import library. +func_cygming_dll_for_implib_fallback_core () { - return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL -; + $opt_debug + match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"` + $OBJDUMP -s --section "$1" "$2" 2>/dev/null | + $SED '/^Contents of section '"$match_literal"':/{ + # Place marker at beginning of archive member dllname section + s/.*/====MARK====/ + p + d + } + # These lines can sometimes be longer than 43 characters, but + # are always uninteresting + /:[ ]*file format pe[i]\{,1\}-/d + /^In archive [^:]*:/d + # Ensure marker is printed + /^====MARK====/p + # Remove all lines with less than 43 characters + /^.\{43\}/!d + # From remaining lines, remove first 43 characters + s/^.\{43\}//' | + $SED -n ' + # Join marker and all lines until next marker into a single line + /^====MARK====/ b para + H + $ b para + b + :para + x + s/\n//g + # Remove the marker + s/^====MARK====// + # Remove trailing dots and whitespace + s/[\. \t]*$// + # Print + /./p' | + # we now have a list, one entry per line, of the stringified + # contents of the appropriate section of all members of the + # archive which possess that section. Heuristic: eliminate + # all those which have a first or second character that is + # a '.' (that is, objdump's representation of an unprintable + # character.) This should work for all archives with less than + # 0x302f exports -- but will fail for DLLs whose name actually + # begins with a literal '.' or a single character followed by + # a '.'. + # + # Of those that remain, print the first one. + $SED -e '/^\./d;/^.\./d;q' } -char * -basename (const char *name) +# func_cygming_gnu_implib_p ARG +# This predicate returns with zero status (TRUE) if +# ARG is a GNU/binutils-style import library. Returns +# with nonzero status (FALSE) otherwise. +func_cygming_gnu_implib_p () { - const char *base; - -#if defined (HAVE_DOS_BASED_FILE_SYSTEM) - /* Skip over the disk name in MSDOS pathnames. */ - if (isalpha (name[0]) && name[1] == ':') - name += 2; -#endif - - for (base = name; *name; name++) - if (IS_DIR_SEPARATOR (*name)) - base = name + 1; - return (char *) base; + $opt_debug + func_to_tool_file "$1" func_convert_file_msys_to_w32 + func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'` + test -n "$func_cygming_gnu_implib_tmp" } -char * -fnqualify(const char *path) +# func_cygming_ms_implib_p ARG +# This predicate returns with zero status (TRUE) if +# ARG is an MS-style import library. Returns +# with nonzero status (FALSE) otherwise. +func_cygming_ms_implib_p () { - size_t size; - char *p; - char tmp[LT_PATHMAX + 1]; - - assert(path != NULL); - - /* Is it qualified already? */ -#if defined (HAVE_DOS_BASED_FILE_SYSTEM) - if (isalpha (path[0]) && path[1] == ':') - return xstrdup (path); -#endif - if (IS_DIR_SEPARATOR (path[0])) - return xstrdup (path); - - /* prepend the current directory */ - /* doesn't handle '~' */ - if (getcwd (tmp, LT_PATHMAX) == NULL) - lt_fatal ("getcwd failed"); - size = strlen(tmp) + 1 + strlen(path) + 1; /* +2 for '/' and '\0' */ - p = XMALLOC(char, size); - sprintf(p, "%s%c%s", tmp, DIR_SEPARATOR, path); - return p; + $opt_debug + func_to_tool_file "$1" func_convert_file_msys_to_w32 + func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'` + test -n "$func_cygming_ms_implib_tmp" } -char * -strendzap(char *str, const char *pat) +# func_cygming_dll_for_implib_fallback ARG +# Platform-specific function to extract the +# name of the DLL associated with the specified +# import library ARG. +# +# This fallback implementation is for use when $DLLTOOL +# does not support the --identify-strict option. +# Invoked by eval'ing the libtool variable +# $sharedlib_from_linklib_cmd +# Result is available in the variable +# $sharedlib_from_linklib_result +func_cygming_dll_for_implib_fallback () { - size_t len, patlen; - - assert(str != NULL); - assert(pat != NULL); + $opt_debug + if func_cygming_gnu_implib_p "$1" ; then + # binutils import library + sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"` + elif func_cygming_ms_implib_p "$1" ; then + # ms-generated import library + sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"` + else + # unknown + sharedlib_from_linklib_result="" + fi +} - len = strlen(str); - patlen = strlen(pat); - if (patlen <= len) - { - str += len - patlen; - if (strcmp(str, pat) == 0) - *str = '\0'; - } - return str; +# func_extract_an_archive dir oldlib +func_extract_an_archive () +{ + $opt_debug + f_ex_an_ar_dir="$1"; shift + f_ex_an_ar_oldlib="$1" + if test "$lock_old_archive_extraction" = yes; then + lockfile=$f_ex_an_ar_oldlib.lock + until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do + func_echo "Waiting for $lockfile to be removed" + sleep 2 + done + fi + func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \ + 'stat=$?; rm -f "$lockfile"; exit $stat' + if test "$lock_old_archive_extraction" = yes; then + $opt_dry_run || rm -f "$lockfile" + fi + if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then + : + else + func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" + fi } -static void -lt_error_core (int exit_status, const char * mode, - const char * message, va_list ap) -{ - fprintf (stderr, "%s: %s: ", program_name, mode); - vfprintf (stderr, message, ap); - fprintf (stderr, ".\n"); - if (exit_status >= 0) - exit (exit_status); +# func_extract_archives gentop oldlib ... +func_extract_archives () +{ + $opt_debug + my_gentop="$1"; shift + my_oldlibs=${1+"$@"} + my_oldobjs="" + my_xlib="" + my_xabs="" + my_xdir="" + + for my_xlib in $my_oldlibs; do + # Extract the objects. + case $my_xlib in + [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; + *) my_xabs=`pwd`"/$my_xlib" ;; + esac + func_basename "$my_xlib" + my_xlib="$func_basename_result" + my_xlib_u=$my_xlib + while :; do + case " $extracted_archives " in + *" $my_xlib_u "*) + func_arith $extracted_serial + 1 + extracted_serial=$func_arith_result + my_xlib_u=lt$extracted_serial-$my_xlib ;; + *) break ;; + esac + done + extracted_archives="$extracted_archives $my_xlib_u" + my_xdir="$my_gentop/$my_xlib_u" + + func_mkdir_p "$my_xdir" + + case $host in + *-darwin*) + func_verbose "Extracting $my_xabs" + # Do not bother doing anything if just a dry run + $opt_dry_run || { + darwin_orig_dir=`pwd` + cd $my_xdir || exit $? + darwin_archive=$my_xabs + darwin_curdir=`pwd` + darwin_base_archive=`basename "$darwin_archive"` + darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true` + if test -n "$darwin_arches"; then + darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'` + darwin_arch= + func_verbose "$darwin_base_archive has multiple architectures $darwin_arches" + for darwin_arch in $darwin_arches ; do + func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}" + $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" + cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" + func_extract_an_archive "`pwd`" "${darwin_base_archive}" + cd "$darwin_curdir" + $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" + done # $darwin_arches + ## Okay now we've a bunch of thin objects, gotta fatten them up :) + darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u` + darwin_file= + darwin_files= + for darwin_file in $darwin_filelist; do + darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP` + $LIPO -create -output "$darwin_file" $darwin_files + done # $darwin_filelist + $RM -rf unfat-$$ + cd "$darwin_orig_dir" + else + cd $darwin_orig_dir + func_extract_an_archive "$my_xdir" "$my_xabs" + fi # $darwin_arches + } # !$opt_dry_run + ;; + *) + func_extract_an_archive "$my_xdir" "$my_xabs" + ;; + esac + my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP` + done + + func_extract_archives_result="$my_oldobjs" } -void -lt_fatal (const char *message, ...) + +# func_emit_wrapper [arg=no] +# +# Emit a libtool wrapper script on stdout. +# Don't directly open a file because we may want to +# incorporate the script contents within a cygwin/mingw +# wrapper executable. Must ONLY be called from within +# func_mode_link because it depends on a number of variables +# set therein. +# +# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR +# variable will take. If 'yes', then the emitted script +# will assume that the directory in which it is stored is +# the $objdir directory. This is a cygwin/mingw-specific +# behavior. +func_emit_wrapper () { - va_list ap; - va_start (ap, message); - lt_error_core (EXIT_FAILURE, "FATAL", message, ap); - va_end (ap); -} -EOF - # we should really use a build-platform specific compiler - # here, but OTOH, the wrappers (shell script and this C one) - # are only useful if you want to execute the "real" binary. - # Since the "real" binary is built for $host, then this - # wrapper might as well be built for $host, too. - $run $LTCC -s -o $cwrapper $cwrappersource - ;; - esac - $rm $output - trap "$rm $output; exit $EXIT_FAILURE" 1 2 15 + func_emit_wrapper_arg1=${1-no} - $echo > $output "\ + $ECHO "\ #! $SHELL # $output - temporary wrapper script for $objdir/$outputname -# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP +# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION # # The $output program cannot be directly executed until all the libtool # libraries that it depends on are installed. @@ -4974,9 +3851,22 @@ EOF # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. -Xsed='${SED} -e 1s/^X//' sed_quote_subst='$sed_quote_subst' +# Be Bourne compatible +if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which + # is contrary to our usage. Disable this feature. + alias -g '\${1+\"\$@\"}'='\"\$@\"' + setopt NO_GLOB_SUBST +else + case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac +fi +BIN_SH=xpg4; export BIN_SH # for Tru64 +DUALCASE=1; export DUALCASE # for MKS sh + # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH @@ -4985,1246 +3875,5580 @@ relink_command=\"$relink_command\" # This environment variable determines our operation mode. if test \"\$libtool_install_magic\" = \"$magic\"; then - # install mode needs the following variable: + # install mode needs the following variables: + generated_by_libtool_version='$macro_version' notinst_deplibs='$notinst_deplibs' else - # When we are sourced in execute mode, \$file and \$echo are already set. + # When we are sourced in execute mode, \$file and \$ECHO are already set. if test \"\$libtool_execute_magic\" != \"$magic\"; then - echo=\"$qecho\" - file=\"\$0\" - # Make sure echo works. - if test \"X\$1\" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. + file=\"\$0\"" + + qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"` + $ECHO "\ + +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +\$1 +_LTECHO_EOF' +} + ECHO=\"$qECHO\" + fi + +# Very basic option parsing. These options are (a) specific to +# the libtool wrapper, (b) are identical between the wrapper +# /script/ and the wrapper /executable/ which is used only on +# windows platforms, and (c) all begin with the string "--lt-" +# (application programs are unlikely to have options which match +# this pattern). +# +# There are only two supported options: --lt-debug and +# --lt-dump-script. There is, deliberately, no --lt-help. +# +# The first argument to this parsing function should be the +# script's $0 value, followed by "$@". +lt_option_debug= +func_parse_lt_options () +{ + lt_script_arg0=\$0 + shift + for lt_opt + do + case \"\$lt_opt\" in + --lt-debug) lt_option_debug=1 ;; + --lt-dump-script) + lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\` + test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=. + lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\` + cat \"\$lt_dump_D/\$lt_dump_F\" + exit 0 + ;; + --lt-*) + \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2 + exit 1 + ;; + esac + done + + # Print the debug banner immediately: + if test -n \"\$lt_option_debug\"; then + echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2 + fi +} + +# Used when --lt-debug. Prints its arguments to stdout +# (redirection is the responsibility of the caller) +func_lt_dump_args () +{ + lt_dump_args_N=1; + for lt_arg + do + \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\" + lt_dump_args_N=\`expr \$lt_dump_args_N + 1\` + done +} + +# Core function for launching the target application +func_exec_program_core () +{ +" + case $host in + # Backslashes separate directories on plain windows + *-*-mingw | *-*-os2* | *-cegcc*) + $ECHO "\ + if test -n \"\$lt_option_debug\"; then + \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2 + func_lt_dump_args \${1+\"\$@\"} 1>&2 + fi + exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} +" + ;; + + *) + $ECHO "\ + if test -n \"\$lt_option_debug\"; then + \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2 + func_lt_dump_args \${1+\"\$@\"} 1>&2 + fi + exec \"\$progdir/\$program\" \${1+\"\$@\"} +" + ;; + esac + $ECHO "\ + \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 + exit 1 +} + +# A function to encapsulate launching the target application +# Strips options in the --lt-* namespace from \$@ and +# launches target application with the remaining arguments. +func_exec_program () +{ + case \" \$* \" in + *\\ --lt-*) + for lt_wr_arg + do + case \$lt_wr_arg in + --lt-*) ;; + *) set x \"\$@\" \"\$lt_wr_arg\"; shift;; + esac shift - elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then - # Yippee, \$echo works! - : + done ;; + esac + func_exec_program_core \${1+\"\$@\"} +} + + # Parse options + func_parse_lt_options \"\$0\" \${1+\"\$@\"} + + # Find the directory that this script lives in. + thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\` + test \"x\$thisdir\" = \"x\$file\" && thisdir=. + + # Follow symbolic links until we get to the real thisdir. + file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\` + while test -n \"\$file\"; do + destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\` + + # If there was a directory component, then change thisdir. + if test \"x\$destdir\" != \"x\$file\"; then + case \"\$destdir\" in + [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; + *) thisdir=\"\$thisdir/\$destdir\" ;; + esac + fi + + file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\` + file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\` + done + + # Usually 'no', except on cygwin/mingw when embedded into + # the cwrapper. + WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1 + if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then + # special case for '.' + if test \"\$thisdir\" = \".\"; then + thisdir=\`pwd\` + fi + # remove .libs from thisdir + case \"\$thisdir\" in + *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;; + $objdir ) thisdir=. ;; + esac + fi + + # Try to get the absolute directory name. + absdir=\`cd \"\$thisdir\" && pwd\` + test -n \"\$absdir\" && thisdir=\"\$absdir\" +" + + if test "$fast_install" = yes; then + $ECHO "\ + program=lt-'$outputname'$exeext + progdir=\"\$thisdir/$objdir\" + + if test ! -f \"\$progdir/\$program\" || + { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ + test \"X\$file\" != \"X\$progdir/\$program\"; }; then + + file=\"\$\$-\$program\" + + if test ! -d \"\$progdir\"; then + $MKDIR \"\$progdir\" else - # Restart under the correct shell, and then maybe \$echo will work. - exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} + $RM \"\$progdir/\$file\" + fi" + + $ECHO "\ + + # relink executable if necessary + if test -n \"\$relink_command\"; then + if relink_command_output=\`eval \$relink_command 2>&1\`; then : + else + $ECHO \"\$relink_command_output\" >&2 + $RM \"\$progdir/\$file\" + exit 1 + fi + fi + + $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || + { $RM \"\$progdir/\$program\"; + $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; } + $RM \"\$progdir/\$file\" + fi" + else + $ECHO "\ + program='$outputname' + progdir=\"\$thisdir/$objdir\" +" + fi + + $ECHO "\ + + if test -f \"\$progdir/\$program\"; then" + + # fixup the dll searchpath if we need to. + # + # Fix the DLL searchpath if we need to. Do this before prepending + # to shlibpath, because on Windows, both are PATH and uninstalled + # libraries must come first. + if test -n "$dllsearchpath"; then + $ECHO "\ + # Add the dll search path components to the executable PATH + PATH=$dllsearchpath:\$PATH +" + fi + + # Export our shlibpath_var if we have one. + if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then + $ECHO "\ + # Add our own library path to $shlibpath_var + $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" + + # Some systems cannot cope with colon-terminated $shlibpath_var + # The second colon is a workaround for a bug in BeOS R4 sed + $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\` + + export $shlibpath_var +" + fi + + $ECHO "\ + if test \"\$libtool_execute_magic\" != \"$magic\"; then + # Run the actual program with our arguments. + func_exec_program \${1+\"\$@\"} fi - fi\ + else + # The program doesn't exist. + \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 + \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 + \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 + exit 1 + fi +fi\ " - $echo >> $output "\ +} + + +# func_emit_cwrapperexe_src +# emit the source code for a wrapper executable on stdout +# Must ONLY be called from within func_mode_link because +# it depends on a number of variable set therein. +func_emit_cwrapperexe_src () +{ + cat < +#include +#ifdef _MSC_VER +# include +# include +# include +#else +# include +# include +# ifdef __CYGWIN__ +# include +# endif +#endif +#include +#include +#include +#include +#include +#include +#include +#include + +/* declarations of non-ANSI functions */ +#if defined(__MINGW32__) +# ifdef __STRICT_ANSI__ +int _putenv (const char *); +# endif +#elif defined(__CYGWIN__) +# ifdef __STRICT_ANSI__ +char *realpath (const char *, char *); +int putenv (char *); +int setenv (const char *, const char *, int); +# endif +/* #elif defined (other platforms) ... */ +#endif + +/* portability defines, excluding path handling macros */ +#if defined(_MSC_VER) +# define setmode _setmode +# define stat _stat +# define chmod _chmod +# define getcwd _getcwd +# define putenv _putenv +# define S_IXUSR _S_IEXEC +# ifndef _INTPTR_T_DEFINED +# define _INTPTR_T_DEFINED +# define intptr_t int +# endif +#elif defined(__MINGW32__) +# define setmode _setmode +# define stat _stat +# define chmod _chmod +# define getcwd _getcwd +# define putenv _putenv +#elif defined(__CYGWIN__) +# define HAVE_SETENV +# define FOPEN_WB "wb" +/* #elif defined (other platforms) ... */ +#endif + +#if defined(PATH_MAX) +# define LT_PATHMAX PATH_MAX +#elif defined(MAXPATHLEN) +# define LT_PATHMAX MAXPATHLEN +#else +# define LT_PATHMAX 1024 +#endif + +#ifndef S_IXOTH +# define S_IXOTH 0 +#endif +#ifndef S_IXGRP +# define S_IXGRP 0 +#endif + +/* path handling portability macros */ +#ifndef DIR_SEPARATOR +# define DIR_SEPARATOR '/' +# define PATH_SEPARATOR ':' +#endif + +#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ + defined (__OS2__) +# define HAVE_DOS_BASED_FILE_SYSTEM +# define FOPEN_WB "wb" +# ifndef DIR_SEPARATOR_2 +# define DIR_SEPARATOR_2 '\\' +# endif +# ifndef PATH_SEPARATOR_2 +# define PATH_SEPARATOR_2 ';' +# endif +#endif + +#ifndef DIR_SEPARATOR_2 +# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) +#else /* DIR_SEPARATOR_2 */ +# define IS_DIR_SEPARATOR(ch) \ + (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) +#endif /* DIR_SEPARATOR_2 */ + +#ifndef PATH_SEPARATOR_2 +# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) +#else /* PATH_SEPARATOR_2 */ +# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) +#endif /* PATH_SEPARATOR_2 */ + +#ifndef FOPEN_WB +# define FOPEN_WB "w" +#endif +#ifndef _O_BINARY +# define _O_BINARY 0 +#endif + +#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) +#define XFREE(stale) do { \ + if (stale) { free ((void *) stale); stale = 0; } \ +} while (0) + +#if defined(LT_DEBUGWRAPPER) +static int lt_debug = 1; +#else +static int lt_debug = 0; +#endif + +const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */ + +void *xmalloc (size_t num); +char *xstrdup (const char *string); +const char *base_name (const char *name); +char *find_executable (const char *wrapper); +char *chase_symlinks (const char *pathspec); +int make_executable (const char *path); +int check_executable (const char *path); +char *strendzap (char *str, const char *pat); +void lt_debugprintf (const char *file, int line, const char *fmt, ...); +void lt_fatal (const char *file, int line, const char *message, ...); +static const char *nonnull (const char *s); +static const char *nonempty (const char *s); +void lt_setenv (const char *name, const char *value); +char *lt_extend_str (const char *orig_value, const char *add, int to_end); +void lt_update_exe_path (const char *name, const char *value); +void lt_update_lib_path (const char *name, const char *value); +char **prepare_spawn (char **argv); +void lt_dump_script (FILE *f); +EOF + + cat <= 0) + && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH))) + return 1; + else + return 0; +} + +int +make_executable (const char *path) +{ + int rval = 0; + struct stat st; + + lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n", + nonempty (path)); + if ((!path) || (!*path)) + return 0; + + if (stat (path, &st) >= 0) + { + rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR); + } + return rval; +} + +/* Searches for the full path of the wrapper. Returns + newly allocated full path name if found, NULL otherwise + Does not chase symlinks, even on platforms that support them. +*/ +char * +find_executable (const char *wrapper) +{ + int has_slash = 0; + const char *p; + const char *p_next; + /* static buffer for getcwd */ + char tmp[LT_PATHMAX + 1]; + int tmp_len; + char *concat_name; + + lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n", + nonempty (wrapper)); + + if ((wrapper == NULL) || (*wrapper == '\0')) + return NULL; + + /* Absolute path? */ +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':') + { + concat_name = xstrdup (wrapper); + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + } + else + { +#endif + if (IS_DIR_SEPARATOR (wrapper[0])) + { + concat_name = xstrdup (wrapper); + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + } +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + } +#endif + + for (p = wrapper; *p; p++) + if (*p == '/') + { + has_slash = 1; + break; + } + if (!has_slash) + { + /* no slashes; search PATH */ + const char *path = getenv ("PATH"); + if (path != NULL) + { + for (p = path; *p; p = p_next) + { + const char *q; + size_t p_len; + for (q = p; *q; q++) + if (IS_PATH_SEPARATOR (*q)) + break; + p_len = q - p; + p_next = (*q == '\0' ? q : q + 1); + if (p_len == 0) + { + /* empty path: current directory */ + if (getcwd (tmp, LT_PATHMAX) == NULL) + lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", + nonnull (strerror (errno))); + tmp_len = strlen (tmp); + concat_name = + XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); + memcpy (concat_name, tmp, tmp_len); + concat_name[tmp_len] = '/'; + strcpy (concat_name + tmp_len + 1, wrapper); + } + else + { + concat_name = + XMALLOC (char, p_len + 1 + strlen (wrapper) + 1); + memcpy (concat_name, p, p_len); + concat_name[p_len] = '/'; + strcpy (concat_name + p_len + 1, wrapper); + } + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + } + } + /* not found in PATH; assume curdir */ + } + /* Relative path | not found in path: prepend cwd */ + if (getcwd (tmp, LT_PATHMAX) == NULL) + lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", + nonnull (strerror (errno))); + tmp_len = strlen (tmp); + concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); + memcpy (concat_name, tmp, tmp_len); + concat_name[tmp_len] = '/'; + strcpy (concat_name + tmp_len + 1, wrapper); + + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + return NULL; +} + +char * +chase_symlinks (const char *pathspec) +{ +#ifndef S_ISLNK + return xstrdup (pathspec); +#else + char buf[LT_PATHMAX]; + struct stat s; + char *tmp_pathspec = xstrdup (pathspec); + char *p; + int has_symlinks = 0; + while (strlen (tmp_pathspec) && !has_symlinks) + { + lt_debugprintf (__FILE__, __LINE__, + "checking path component for symlinks: %s\n", + tmp_pathspec); + if (lstat (tmp_pathspec, &s) == 0) + { + if (S_ISLNK (s.st_mode) != 0) + { + has_symlinks = 1; + break; + } + + /* search backwards for last DIR_SEPARATOR */ + p = tmp_pathspec + strlen (tmp_pathspec) - 1; + while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) + p--; + if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) + { + /* no more DIR_SEPARATORS left */ + break; + } + *p = '\0'; + } + else + { + lt_fatal (__FILE__, __LINE__, + "error accessing file \"%s\": %s", + tmp_pathspec, nonnull (strerror (errno))); + } + } + XFREE (tmp_pathspec); + + if (!has_symlinks) + { + return xstrdup (pathspec); + } + + tmp_pathspec = realpath (pathspec, buf); + if (tmp_pathspec == 0) + { + lt_fatal (__FILE__, __LINE__, + "could not follow symlinks for %s", pathspec); + } + return xstrdup (tmp_pathspec); +#endif +} + +char * +strendzap (char *str, const char *pat) +{ + size_t len, patlen; + + assert (str != NULL); + assert (pat != NULL); + + len = strlen (str); + patlen = strlen (pat); + + if (patlen <= len) + { + str += len - patlen; + if (strcmp (str, pat) == 0) + *str = '\0'; + } + return str; +} + +void +lt_debugprintf (const char *file, int line, const char *fmt, ...) +{ + va_list args; + if (lt_debug) + { + (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line); + va_start (args, fmt); + (void) vfprintf (stderr, fmt, args); + va_end (args); + } +} + +static void +lt_error_core (int exit_status, const char *file, + int line, const char *mode, + const char *message, va_list ap) +{ + fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode); + vfprintf (stderr, message, ap); + fprintf (stderr, ".\n"); + + if (exit_status >= 0) + exit (exit_status); +} + +void +lt_fatal (const char *file, int line, const char *message, ...) +{ + va_list ap; + va_start (ap, message); + lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap); + va_end (ap); +} + +static const char * +nonnull (const char *s) +{ + return s ? s : "(null)"; +} + +static const char * +nonempty (const char *s) +{ + return (s && !*s) ? "(empty)" : nonnull (s); +} + +void +lt_setenv (const char *name, const char *value) +{ + lt_debugprintf (__FILE__, __LINE__, + "(lt_setenv) setting '%s' to '%s'\n", + nonnull (name), nonnull (value)); + { +#ifdef HAVE_SETENV + /* always make a copy, for consistency with !HAVE_SETENV */ + char *str = xstrdup (value); + setenv (name, str, 1); +#else + int len = strlen (name) + 1 + strlen (value) + 1; + char *str = XMALLOC (char, len); + sprintf (str, "%s=%s", name, value); + if (putenv (str) != EXIT_SUCCESS) + { + XFREE (str); + } +#endif + } +} + +char * +lt_extend_str (const char *orig_value, const char *add, int to_end) +{ + char *new_value; + if (orig_value && *orig_value) + { + int orig_value_len = strlen (orig_value); + int add_len = strlen (add); + new_value = XMALLOC (char, add_len + orig_value_len + 1); + if (to_end) + { + strcpy (new_value, orig_value); + strcpy (new_value + orig_value_len, add); + } + else + { + strcpy (new_value, add); + strcpy (new_value + add_len, orig_value); + } + } + else + { + new_value = xstrdup (add); + } + return new_value; +} + +void +lt_update_exe_path (const char *name, const char *value) +{ + lt_debugprintf (__FILE__, __LINE__, + "(lt_update_exe_path) modifying '%s' by prepending '%s'\n", + nonnull (name), nonnull (value)); + + if (name && *name && value && *value) + { + char *new_value = lt_extend_str (getenv (name), value, 0); + /* some systems can't cope with a ':'-terminated path #' */ + int len = strlen (new_value); + while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1])) + { + new_value[len-1] = '\0'; + } + lt_setenv (name, new_value); + XFREE (new_value); + } +} + +void +lt_update_lib_path (const char *name, const char *value) +{ + lt_debugprintf (__FILE__, __LINE__, + "(lt_update_lib_path) modifying '%s' by prepending '%s'\n", + nonnull (name), nonnull (value)); + + if (name && *name && value && *value) + { + char *new_value = lt_extend_str (getenv (name), value, 0); + lt_setenv (name, new_value); + XFREE (new_value); + } +} + +EOF + case $host_os in + mingw*) + cat <<"EOF" + +/* Prepares an argument vector before calling spawn(). + Note that spawn() does not by itself call the command interpreter + (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") : + ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO); + GetVersionEx(&v); + v.dwPlatformId == VER_PLATFORM_WIN32_NT; + }) ? "cmd.exe" : "command.com"). + Instead it simply concatenates the arguments, separated by ' ', and calls + CreateProcess(). We must quote the arguments since Win32 CreateProcess() + interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a + special way: + - Space and tab are interpreted as delimiters. They are not treated as + delimiters if they are surrounded by double quotes: "...". + - Unescaped double quotes are removed from the input. Their only effect is + that within double quotes, space and tab are treated like normal + characters. + - Backslashes not followed by double quotes are not special. + - But 2*n+1 backslashes followed by a double quote become + n backslashes followed by a double quote (n >= 0): + \" -> " + \\\" -> \" + \\\\\" -> \\" + */ +#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" +#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" +char ** +prepare_spawn (char **argv) +{ + size_t argc; + char **new_argv; + size_t i; + + /* Count number of arguments. */ + for (argc = 0; argv[argc] != NULL; argc++) + ; + + /* Allocate new argument vector. */ + new_argv = XMALLOC (char *, argc + 1); + + /* Put quoted arguments into the new argument vector. */ + for (i = 0; i < argc; i++) + { + const char *string = argv[i]; + + if (string[0] == '\0') + new_argv[i] = xstrdup ("\"\""); + else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL) + { + int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL); + size_t length; + unsigned int backslashes; + const char *s; + char *quoted_string; + char *p; + + length = 0; + backslashes = 0; + if (quote_around) + length++; + for (s = string; *s != '\0'; s++) + { + char c = *s; + if (c == '"') + length += backslashes + 1; + length++; + if (c == '\\') + backslashes++; + else + backslashes = 0; + } + if (quote_around) + length += backslashes + 1; + + quoted_string = XMALLOC (char, length + 1); + + p = quoted_string; + backslashes = 0; + if (quote_around) + *p++ = '"'; + for (s = string; *s != '\0'; s++) + { + char c = *s; + if (c == '"') + { + unsigned int j; + for (j = backslashes + 1; j > 0; j--) + *p++ = '\\'; + } + *p++ = c; + if (c == '\\') + backslashes++; + else + backslashes = 0; + } + if (quote_around) + { + unsigned int j; + for (j = backslashes; j > 0; j--) + *p++ = '\\'; + *p++ = '"'; + } + *p = '\0'; + + new_argv[i] = quoted_string; + } + else + new_argv[i] = (char *) string; + } + new_argv[argc] = NULL; + + return new_argv; +} +EOF + ;; + esac + + cat <<"EOF" +void lt_dump_script (FILE* f) +{ +EOF + func_emit_wrapper yes | + $SED -n -e ' +s/^\(.\{79\}\)\(..*\)/\1\ +\2/ +h +s/\([\\"]\)/\\\1/g +s/$/\\n/ +s/\([^\n]*\).*/ fputs ("\1", f);/p +g +D' + cat <<"EOF" +} +EOF +} +# end: func_emit_cwrapperexe_src + +# func_win32_import_lib_p ARG +# True if ARG is an import lib, as indicated by $file_magic_cmd +func_win32_import_lib_p () +{ + $opt_debug + case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in + *import*) : ;; + *) false ;; + esac +} + +# func_mode_link arg... +func_mode_link () +{ + $opt_debug + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) + # It is impossible to link a dll without this setting, and + # we shouldn't force the makefile maintainer to figure out + # which system we are compiling for in order to pass an extra + # flag for every libtool invocation. + # allow_undefined=no + + # FIXME: Unfortunately, there are problems with the above when trying + # to make a dll which has undefined symbols, in which case not + # even a static library is built. For now, we need to specify + # -no-undefined on the libtool link line when we can be certain + # that all symbols are satisfied, otherwise we get a static library. + allow_undefined=yes + ;; + *) + allow_undefined=yes + ;; + esac + libtool_args=$nonopt + base_compile="$nonopt $@" + compile_command=$nonopt + finalize_command=$nonopt + + compile_rpath= + finalize_rpath= + compile_shlibpath= + finalize_shlibpath= + convenience= + old_convenience= + deplibs= + old_deplibs= + compiler_flags= + linker_flags= + dllsearchpath= + lib_search_path=`pwd` + inst_prefix_dir= + new_inherited_linker_flags= + + avoid_version=no + bindir= + dlfiles= + dlprefiles= + dlself=no + export_dynamic=no + export_symbols= + export_symbols_regex= + generated= + libobjs= + ltlibs= + module=no + no_install=no + objs= + non_pic_objects= + precious_files_regex= + prefer_static_libs=no + preload=no + prev= + prevarg= + release= + rpath= + xrpath= + perm_rpath= + temp_rpath= + thread_safe=no + vinfo= + vinfo_number=no + weak_libs= + single_module="${wl}-single_module" + func_infer_tag $base_compile + + # We need to know -static, to get the right output filenames. + for arg + do + case $arg in + -shared) + test "$build_libtool_libs" != yes && \ + func_fatal_configuration "can not build a shared library" + build_old_libs=no + break + ;; + -all-static | -static | -static-libtool-libs) + case $arg in + -all-static) + if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then + func_warning "complete static linking is impossible in this configuration" + fi + if test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=yes + ;; + -static) + if test -z "$pic_flag" && test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=built + ;; + -static-libtool-libs) + if test -z "$pic_flag" && test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=yes + ;; + esac + build_libtool_libs=no + build_old_libs=yes + break + ;; + esac + done + + # See if our shared archives depend on static archives. + test -n "$old_archive_from_new_cmds" && build_old_libs=yes + + # Go through the arguments, transforming them on the way. + while test "$#" -gt 0; do + arg="$1" + shift + func_quote_for_eval "$arg" + qarg=$func_quote_for_eval_unquoted_result + func_append libtool_args " $func_quote_for_eval_result" + + # If the previous option needs an argument, assign it. + if test -n "$prev"; then + case $prev in + output) + func_append compile_command " @OUTPUT@" + func_append finalize_command " @OUTPUT@" + ;; + esac + + case $prev in + bindir) + bindir="$arg" + prev= + continue + ;; + dlfiles|dlprefiles) + if test "$preload" = no; then + # Add the symbol object into the linking commands. + func_append compile_command " @SYMFILE@" + func_append finalize_command " @SYMFILE@" + preload=yes + fi + case $arg in + *.la | *.lo) ;; # We handle these cases below. + force) + if test "$dlself" = no; then + dlself=needless + export_dynamic=yes + fi + prev= + continue + ;; + self) + if test "$prev" = dlprefiles; then + dlself=yes + elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then + dlself=yes + else + dlself=needless + export_dynamic=yes + fi + prev= + continue + ;; + *) + if test "$prev" = dlfiles; then + func_append dlfiles " $arg" + else + func_append dlprefiles " $arg" + fi + prev= + continue + ;; + esac + ;; + expsyms) + export_symbols="$arg" + test -f "$arg" \ + || func_fatal_error "symbol file \`$arg' does not exist" + prev= + continue + ;; + expsyms_regex) + export_symbols_regex="$arg" + prev= + continue + ;; + framework) + case $host in + *-*-darwin*) + case "$deplibs " in + *" $qarg.ltframework "*) ;; + *) func_append deplibs " $qarg.ltframework" # this is fixed later + ;; + esac + ;; + esac + prev= + continue + ;; + inst_prefix) + inst_prefix_dir="$arg" + prev= + continue + ;; + objectlist) + if test -f "$arg"; then + save_arg=$arg + moreargs= + for fil in `cat "$save_arg"` + do +# func_append moreargs " $fil" + arg=$fil + # A libtool-controlled object. + + # Check to see that this really is a libtool object. + if func_lalib_unsafe_p "$arg"; then + pic_object= + non_pic_object= + + # Read the .lo file + func_source "$arg" + + if test -z "$pic_object" || + test -z "$non_pic_object" || + test "$pic_object" = none && + test "$non_pic_object" = none; then + func_fatal_error "cannot find name of object for \`$arg'" + fi + + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + if test "$pic_object" != none; then + # Prepend the subdirectory the object is found in. + pic_object="$xdir$pic_object" + + if test "$prev" = dlfiles; then + if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + func_append dlfiles " $pic_object" + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles + fi + fi + + # CHECK ME: I think I busted this. -Ossama + if test "$prev" = dlprefiles; then + # Preload the old-style object. + func_append dlprefiles " $pic_object" + prev= + fi + + # A PIC object. + func_append libobjs " $pic_object" + arg="$pic_object" + fi + + # Non-PIC object. + if test "$non_pic_object" != none; then + # Prepend the subdirectory the object is found in. + non_pic_object="$xdir$non_pic_object" + + # A standard non-PIC object + func_append non_pic_objects " $non_pic_object" + if test -z "$pic_object" || test "$pic_object" = none ; then + arg="$non_pic_object" + fi + else + # If the PIC object exists, use it instead. + # $xdir was prepended to $pic_object above. + non_pic_object="$pic_object" + func_append non_pic_objects " $non_pic_object" + fi + else + # Only an error if not doing a dry-run. + if $opt_dry_run; then + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + func_lo2o "$arg" + pic_object=$xdir$objdir/$func_lo2o_result + non_pic_object=$xdir$func_lo2o_result + func_append libobjs " $pic_object" + func_append non_pic_objects " $non_pic_object" + else + func_fatal_error "\`$arg' is not a valid libtool object" + fi + fi + done + else + func_fatal_error "link input file \`$arg' does not exist" + fi + arg=$save_arg + prev= + continue + ;; + precious_regex) + precious_files_regex="$arg" + prev= + continue + ;; + release) + release="-$arg" + prev= + continue + ;; + rpath | xrpath) + # We need an absolute path. + case $arg in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + func_fatal_error "only absolute run-paths are allowed" + ;; + esac + if test "$prev" = rpath; then + case "$rpath " in + *" $arg "*) ;; + *) func_append rpath " $arg" ;; + esac + else + case "$xrpath " in + *" $arg "*) ;; + *) func_append xrpath " $arg" ;; + esac + fi + prev= + continue + ;; + shrext) + shrext_cmds="$arg" + prev= + continue + ;; + weak) + func_append weak_libs " $arg" + prev= + continue + ;; + xcclinker) + func_append linker_flags " $qarg" + func_append compiler_flags " $qarg" + prev= + func_append compile_command " $qarg" + func_append finalize_command " $qarg" + continue + ;; + xcompiler) + func_append compiler_flags " $qarg" + prev= + func_append compile_command " $qarg" + func_append finalize_command " $qarg" + continue + ;; + xlinker) + func_append linker_flags " $qarg" + func_append compiler_flags " $wl$qarg" + prev= + func_append compile_command " $wl$qarg" + func_append finalize_command " $wl$qarg" + continue + ;; + *) + eval "$prev=\"\$arg\"" + prev= + continue + ;; + esac + fi # test -n "$prev" + + prevarg="$arg" + + case $arg in + -all-static) + if test -n "$link_static_flag"; then + # See comment for -static flag below, for more details. + func_append compile_command " $link_static_flag" + func_append finalize_command " $link_static_flag" + fi + continue + ;; + + -allow-undefined) + # FIXME: remove this flag sometime in the future. + func_fatal_error "\`-allow-undefined' must not be used because it is the default" + ;; + + -avoid-version) + avoid_version=yes + continue + ;; + + -bindir) + prev=bindir + continue + ;; + + -dlopen) + prev=dlfiles + continue + ;; + + -dlpreopen) + prev=dlprefiles + continue + ;; + + -export-dynamic) + export_dynamic=yes + continue + ;; + + -export-symbols | -export-symbols-regex) + if test -n "$export_symbols" || test -n "$export_symbols_regex"; then + func_fatal_error "more than one -exported-symbols argument is not allowed" + fi + if test "X$arg" = "X-export-symbols"; then + prev=expsyms + else + prev=expsyms_regex + fi + continue + ;; + + -framework) + prev=framework + continue + ;; + + -inst-prefix-dir) + prev=inst_prefix + continue + ;; + + # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* + # so, if we see these flags be careful not to treat them like -L + -L[A-Z][A-Z]*:*) + case $with_gcc/$host in + no/*-*-irix* | /*-*-irix*) + func_append compile_command " $arg" + func_append finalize_command " $arg" + ;; + esac + continue + ;; + + -L*) + func_stripname "-L" '' "$arg" + if test -z "$func_stripname_result"; then + if test "$#" -gt 0; then + func_fatal_error "require no space between \`-L' and \`$1'" + else + func_fatal_error "need path for \`-L' option" + fi + fi + func_resolve_sysroot "$func_stripname_result" + dir=$func_resolve_sysroot_result + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + absdir=`cd "$dir" && pwd` + test -z "$absdir" && \ + func_fatal_error "cannot determine absolute directory name of \`$dir'" + dir="$absdir" + ;; + esac + case "$deplibs " in + *" -L$dir "* | *" $arg "*) + # Will only happen for absolute or sysroot arguments + ;; + *) + # Preserve sysroot, but never include relative directories + case $dir in + [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;; + *) func_append deplibs " -L$dir" ;; + esac + func_append lib_search_path " $dir" + ;; + esac + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) + testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'` + case :$dllsearchpath: in + *":$dir:"*) ;; + ::) dllsearchpath=$dir;; + *) func_append dllsearchpath ":$dir";; + esac + case :$dllsearchpath: in + *":$testbindir:"*) ;; + ::) dllsearchpath=$testbindir;; + *) func_append dllsearchpath ":$testbindir";; + esac + ;; + esac + continue + ;; + + -l*) + if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*) + # These systems don't actually have a C or math library (as such) + continue + ;; + *-*-os2*) + # These systems don't actually have a C library (as such) + test "X$arg" = "X-lc" && continue + ;; + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc due to us having libc/libc_r. + test "X$arg" = "X-lc" && continue + ;; + *-*-rhapsody* | *-*-darwin1.[012]) + # Rhapsody C and math libraries are in the System framework + func_append deplibs " System.ltframework" + continue + ;; + *-*-sco3.2v5* | *-*-sco5v6*) + # Causes problems with __ctype + test "X$arg" = "X-lc" && continue + ;; + *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) + # Compiler inserts libc in the correct place for threads to work + test "X$arg" = "X-lc" && continue + ;; + esac + elif test "X$arg" = "X-lc_r"; then + case $host in + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc_r directly, use -pthread flag. + continue + ;; + esac + fi + func_append deplibs " $arg" + continue + ;; + + -module) + module=yes + continue + ;; + + # Tru64 UNIX uses -model [arg] to determine the layout of C++ + # classes, name mangling, and exception handling. + # Darwin uses the -arch flag to determine output architecture. + -model|-arch|-isysroot|--sysroot) + func_append compiler_flags " $arg" + func_append compile_command " $arg" + func_append finalize_command " $arg" + prev=xcompiler + continue + ;; + + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \ + |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*) + func_append compiler_flags " $arg" + func_append compile_command " $arg" + func_append finalize_command " $arg" + case "$new_inherited_linker_flags " in + *" $arg "*) ;; + * ) func_append new_inherited_linker_flags " $arg" ;; + esac + continue + ;; + + -multi_module) + single_module="${wl}-multi_module" + continue + ;; + + -no-fast-install) + fast_install=no + continue + ;; + + -no-install) + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*) + # The PATH hackery in wrapper scripts is required on Windows + # and Darwin in order for the loader to find any dlls it needs. + func_warning "\`-no-install' is ignored for $host" + func_warning "assuming \`-no-fast-install' instead" + fast_install=no + ;; + *) no_install=yes ;; + esac + continue + ;; + + -no-undefined) + allow_undefined=no + continue + ;; + + -objectlist) + prev=objectlist + continue + ;; + + -o) prev=output ;; + + -precious-files-regex) + prev=precious_regex + continue + ;; + + -release) + prev=release + continue + ;; + + -rpath) + prev=rpath + continue + ;; + + -R) + prev=xrpath + continue + ;; + + -R*) + func_stripname '-R' '' "$arg" + dir=$func_stripname_result + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + =*) + func_stripname '=' '' "$dir" + dir=$lt_sysroot$func_stripname_result + ;; + *) + func_fatal_error "only absolute run-paths are allowed" + ;; + esac + case "$xrpath " in + *" $dir "*) ;; + *) func_append xrpath " $dir" ;; + esac + continue + ;; + + -shared) + # The effects of -shared are defined in a previous loop. + continue + ;; + + -shrext) + prev=shrext + continue + ;; + + -static | -static-libtool-libs) + # The effects of -static are defined in a previous loop. + # We used to do the same as -all-static on platforms that + # didn't have a PIC flag, but the assumption that the effects + # would be equivalent was wrong. It would break on at least + # Digital Unix and AIX. + continue + ;; + + -thread-safe) + thread_safe=yes + continue + ;; + + -version-info) + prev=vinfo + continue + ;; + + -version-number) + prev=vinfo + vinfo_number=yes + continue + ;; + + -weak) + prev=weak + continue + ;; + + -Wc,*) + func_stripname '-Wc,' '' "$arg" + args=$func_stripname_result + arg= + save_ifs="$IFS"; IFS=',' + for flag in $args; do + IFS="$save_ifs" + func_quote_for_eval "$flag" + func_append arg " $func_quote_for_eval_result" + func_append compiler_flags " $func_quote_for_eval_result" + done + IFS="$save_ifs" + func_stripname ' ' '' "$arg" + arg=$func_stripname_result + ;; + + -Wl,*) + func_stripname '-Wl,' '' "$arg" + args=$func_stripname_result + arg= + save_ifs="$IFS"; IFS=',' + for flag in $args; do + IFS="$save_ifs" + func_quote_for_eval "$flag" + func_append arg " $wl$func_quote_for_eval_result" + func_append compiler_flags " $wl$func_quote_for_eval_result" + func_append linker_flags " $func_quote_for_eval_result" + done + IFS="$save_ifs" + func_stripname ' ' '' "$arg" + arg=$func_stripname_result + ;; + + -Xcompiler) + prev=xcompiler + continue + ;; + + -Xlinker) + prev=xlinker + continue + ;; + + -XCClinker) + prev=xcclinker + continue + ;; + + # -msg_* for osf cc + -msg_*) + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + ;; + + # Flags to be passed through unchanged, with rationale: + # -64, -mips[0-9] enable 64-bit mode for the SGI compiler + # -r[0-9][0-9]* specify processor for the SGI compiler + # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler + # +DA*, +DD* enable 64-bit mode for the HP compiler + # -q* compiler args for the IBM compiler + # -m*, -t[45]*, -txscale* architecture-specific flags for GCC + # -F/path path to uninstalled frameworks, gcc on darwin + # -p, -pg, --coverage, -fprofile-* profiling flags for GCC + # @file GCC response files + # -tp=* Portland pgcc target processor selection + # --sysroot=* for sysroot support + # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization + -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ + -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \ + -O*|-flto*|-fwhopr*|-fuse-linker-plugin) + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + func_append compile_command " $arg" + func_append finalize_command " $arg" + func_append compiler_flags " $arg" + continue + ;; + + # Some other compiler flag. + -* | +*) + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + ;; + + *.$objext) + # A standard object. + func_append objs " $arg" + ;; + + *.lo) + # A libtool-controlled object. + + # Check to see that this really is a libtool object. + if func_lalib_unsafe_p "$arg"; then + pic_object= + non_pic_object= + + # Read the .lo file + func_source "$arg" + + if test -z "$pic_object" || + test -z "$non_pic_object" || + test "$pic_object" = none && + test "$non_pic_object" = none; then + func_fatal_error "cannot find name of object for \`$arg'" + fi + + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + if test "$pic_object" != none; then + # Prepend the subdirectory the object is found in. + pic_object="$xdir$pic_object" + + if test "$prev" = dlfiles; then + if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + func_append dlfiles " $pic_object" + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles + fi + fi + + # CHECK ME: I think I busted this. -Ossama + if test "$prev" = dlprefiles; then + # Preload the old-style object. + func_append dlprefiles " $pic_object" + prev= + fi + + # A PIC object. + func_append libobjs " $pic_object" + arg="$pic_object" + fi + + # Non-PIC object. + if test "$non_pic_object" != none; then + # Prepend the subdirectory the object is found in. + non_pic_object="$xdir$non_pic_object" + + # A standard non-PIC object + func_append non_pic_objects " $non_pic_object" + if test -z "$pic_object" || test "$pic_object" = none ; then + arg="$non_pic_object" + fi + else + # If the PIC object exists, use it instead. + # $xdir was prepended to $pic_object above. + non_pic_object="$pic_object" + func_append non_pic_objects " $non_pic_object" + fi + else + # Only an error if not doing a dry-run. + if $opt_dry_run; then + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + func_lo2o "$arg" + pic_object=$xdir$objdir/$func_lo2o_result + non_pic_object=$xdir$func_lo2o_result + func_append libobjs " $pic_object" + func_append non_pic_objects " $non_pic_object" + else + func_fatal_error "\`$arg' is not a valid libtool object" + fi + fi + ;; + + *.$libext) + # An archive. + func_append deplibs " $arg" + func_append old_deplibs " $arg" + continue + ;; + + *.la) + # A libtool-controlled library. + + func_resolve_sysroot "$arg" + if test "$prev" = dlfiles; then + # This library was specified with -dlopen. + func_append dlfiles " $func_resolve_sysroot_result" + prev= + elif test "$prev" = dlprefiles; then + # The library was specified with -dlpreopen. + func_append dlprefiles " $func_resolve_sysroot_result" + prev= + else + func_append deplibs " $func_resolve_sysroot_result" + fi + continue + ;; + + # Some other compiler argument. + *) + # Unknown arguments in both finalize_command and compile_command need + # to be aesthetically quoted because they are evaled later. + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + ;; + esac # arg + + # Now actually substitute the argument into the commands. + if test -n "$arg"; then + func_append compile_command " $arg" + func_append finalize_command " $arg" + fi + done # argument parsing loop + + test -n "$prev" && \ + func_fatal_help "the \`$prevarg' option requires an argument" + + if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then + eval arg=\"$export_dynamic_flag_spec\" + func_append compile_command " $arg" + func_append finalize_command " $arg" + fi + + oldlibs= + # calculate the name of the file, without its directory + func_basename "$output" + outputname="$func_basename_result" + libobjs_save="$libobjs" + + if test -n "$shlibpath_var"; then + # get the directories listed in $shlibpath_var + eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\` + else + shlib_search_path= + fi + eval sys_lib_search_path=\"$sys_lib_search_path_spec\" + eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" + + func_dirname "$output" "/" "" + output_objdir="$func_dirname_result$objdir" + func_to_tool_file "$output_objdir/" + tool_output_objdir=$func_to_tool_file_result + # Create the object directory. + func_mkdir_p "$output_objdir" + + # Determine the type of output + case $output in + "") + func_fatal_help "you must specify an output file" + ;; + *.$libext) linkmode=oldlib ;; + *.lo | *.$objext) linkmode=obj ;; + *.la) linkmode=lib ;; + *) linkmode=prog ;; # Anything else should be a program. + esac + + specialdeplibs= + + libs= + # Find all interdependent deplibs by searching for libraries + # that are linked more than once (e.g. -la -lb -la) + for deplib in $deplibs; do + if $opt_preserve_dup_deps ; then + case "$libs " in + *" $deplib "*) func_append specialdeplibs " $deplib" ;; + esac + fi + func_append libs " $deplib" + done + + if test "$linkmode" = lib; then + libs="$predeps $libs $compiler_lib_search_path $postdeps" + + # Compute libraries that are listed more than once in $predeps + # $postdeps and mark them as special (i.e., whose duplicates are + # not to be eliminated). + pre_post_deps= + if $opt_duplicate_compiler_generated_deps; then + for pre_post_dep in $predeps $postdeps; do + case "$pre_post_deps " in + *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;; + esac + func_append pre_post_deps " $pre_post_dep" + done + fi + pre_post_deps= + fi + + deplibs= + newdependency_libs= + newlib_search_path= + need_relink=no # whether we're linking any uninstalled libtool libraries + notinst_deplibs= # not-installed libtool libraries + notinst_path= # paths that contain not-installed libtool libraries + + case $linkmode in + lib) + passes="conv dlpreopen link" + for file in $dlfiles $dlprefiles; do + case $file in + *.la) ;; + *) + func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file" + ;; + esac + done + ;; + prog) + compile_deplibs= + finalize_deplibs= + alldeplibs=no + newdlfiles= + newdlprefiles= + passes="conv scan dlopen dlpreopen link" + ;; + *) passes="conv" + ;; + esac + + for pass in $passes; do + # The preopen pass in lib mode reverses $deplibs; put it back here + # so that -L comes before libs that need it for instance... + if test "$linkmode,$pass" = "lib,link"; then + ## FIXME: Find the place where the list is rebuilt in the wrong + ## order, and fix it there properly + tmp_deplibs= + for deplib in $deplibs; do + tmp_deplibs="$deplib $tmp_deplibs" + done + deplibs="$tmp_deplibs" + fi + + if test "$linkmode,$pass" = "lib,link" || + test "$linkmode,$pass" = "prog,scan"; then + libs="$deplibs" + deplibs= + fi + if test "$linkmode" = prog; then + case $pass in + dlopen) libs="$dlfiles" ;; + dlpreopen) libs="$dlprefiles" ;; + link) + libs="$deplibs %DEPLIBS%" + test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs" + ;; + esac + fi + if test "$linkmode,$pass" = "lib,dlpreopen"; then + # Collect and forward deplibs of preopened libtool libs + for lib in $dlprefiles; do + # Ignore non-libtool-libs + dependency_libs= + func_resolve_sysroot "$lib" + case $lib in + *.la) func_source "$func_resolve_sysroot_result" ;; + esac + + # Collect preopened libtool deplibs, except any this library + # has declared as weak libs + for deplib in $dependency_libs; do + func_basename "$deplib" + deplib_base=$func_basename_result + case " $weak_libs " in + *" $deplib_base "*) ;; + *) func_append deplibs " $deplib" ;; + esac + done + done + libs="$dlprefiles" + fi + if test "$pass" = dlopen; then + # Collect dlpreopened libraries + save_deplibs="$deplibs" + deplibs= + fi + + for deplib in $libs; do + lib= + found=no + case $deplib in + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \ + |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*) + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + func_append compiler_flags " $deplib" + if test "$linkmode" = lib ; then + case "$new_inherited_linker_flags " in + *" $deplib "*) ;; + * ) func_append new_inherited_linker_flags " $deplib" ;; + esac + fi + fi + continue + ;; + -l*) + if test "$linkmode" != lib && test "$linkmode" != prog; then + func_warning "\`-l' is ignored for archives/objects" + continue + fi + func_stripname '-l' '' "$deplib" + name=$func_stripname_result + if test "$linkmode" = lib; then + searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path" + else + searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path" + fi + for searchdir in $searchdirs; do + for search_ext in .la $std_shrext .so .a; do + # Search the libtool library + lib="$searchdir/lib${name}${search_ext}" + if test -f "$lib"; then + if test "$search_ext" = ".la"; then + found=yes + else + found=no + fi + break 2 + fi + done + done + if test "$found" != yes; then + # deplib doesn't seem to be a libtool library + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" + fi + continue + else # deplib is a libtool library + # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, + # We need to do some special things here, and not later. + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $deplib "*) + if func_lalib_p "$lib"; then + library_names= + old_library= + func_source "$lib" + for l in $old_library $library_names; do + ll="$l" + done + if test "X$ll" = "X$old_library" ; then # only static version available + found=no + func_dirname "$lib" "" "." + ladir="$func_dirname_result" + lib=$ladir/$old_library + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" + fi + continue + fi + fi + ;; + *) ;; + esac + fi + fi + ;; # -l + *.ltframework) + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + if test "$linkmode" = lib ; then + case "$new_inherited_linker_flags " in + *" $deplib "*) ;; + * ) func_append new_inherited_linker_flags " $deplib" ;; + esac + fi + fi + continue + ;; + -L*) + case $linkmode in + lib) + deplibs="$deplib $deplibs" + test "$pass" = conv && continue + newdependency_libs="$deplib $newdependency_libs" + func_stripname '-L' '' "$deplib" + func_resolve_sysroot "$func_stripname_result" + func_append newlib_search_path " $func_resolve_sysroot_result" + ;; + prog) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + continue + fi + if test "$pass" = scan; then + deplibs="$deplib $deplibs" + else + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + fi + func_stripname '-L' '' "$deplib" + func_resolve_sysroot "$func_stripname_result" + func_append newlib_search_path " $func_resolve_sysroot_result" + ;; + *) + func_warning "\`-L' is ignored for archives/objects" + ;; + esac # linkmode + continue + ;; # -L + -R*) + if test "$pass" = link; then + func_stripname '-R' '' "$deplib" + func_resolve_sysroot "$func_stripname_result" + dir=$func_resolve_sysroot_result + # Make sure the xrpath contains only unique directories. + case "$xrpath " in + *" $dir "*) ;; + *) func_append xrpath " $dir" ;; + esac + fi + deplibs="$deplib $deplibs" + continue + ;; + *.la) + func_resolve_sysroot "$deplib" + lib=$func_resolve_sysroot_result + ;; + *.$libext) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + continue + fi + case $linkmode in + lib) + # Linking convenience modules into shared libraries is allowed, + # but linking other static libraries is non-portable. + case " $dlpreconveniencelibs " in + *" $deplib "*) ;; + *) + valid_a_lib=no + case $deplibs_check_method in + match_pattern*) + set dummy $deplibs_check_method; shift + match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` + if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \ + | $EGREP "$match_pattern_regex" > /dev/null; then + valid_a_lib=yes + fi + ;; + pass_all) + valid_a_lib=yes + ;; + esac + if test "$valid_a_lib" != yes; then + echo + $ECHO "*** Warning: Trying to link with static lib archive $deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have" + echo "*** because the file extensions .$libext of this argument makes me believe" + echo "*** that it is just a static archive that I should not use here." + else + echo + $ECHO "*** Warning: Linking the shared library $output against the" + $ECHO "*** static library $deplib is not portable!" + deplibs="$deplib $deplibs" + fi + ;; + esac + continue + ;; + prog) + if test "$pass" != link; then + deplibs="$deplib $deplibs" + else + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + fi + continue + ;; + esac # linkmode + ;; # *.$libext + *.lo | *.$objext) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + elif test "$linkmode" = prog; then + if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then + # If there is no dlopen support or we're linking statically, + # we need to preload. + func_append newdlprefiles " $deplib" + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + func_append newdlfiles " $deplib" + fi + fi + continue + ;; + %DEPLIBS%) + alldeplibs=yes + continue + ;; + esac # case $deplib + + if test "$found" = yes || test -f "$lib"; then : + else + func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'" + fi + + # Check to see that this really is a libtool archive. + func_lalib_unsafe_p "$lib" \ + || func_fatal_error "\`$lib' is not a valid libtool archive" + + func_dirname "$lib" "" "." + ladir="$func_dirname_result" + + dlname= + dlopen= + dlpreopen= + libdir= + library_names= + old_library= + inherited_linker_flags= + # If the library was installed with an old release of libtool, + # it will not redefine variables installed, or shouldnotlink + installed=yes + shouldnotlink=no + avoidtemprpath= + + + # Read the .la file + func_source "$lib" + + # Convert "-framework foo" to "foo.ltframework" + if test -n "$inherited_linker_flags"; then + tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'` + for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do + case " $new_inherited_linker_flags " in + *" $tmp_inherited_linker_flag "*) ;; + *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";; + esac + done + fi + dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + if test "$linkmode,$pass" = "lib,link" || + test "$linkmode,$pass" = "prog,scan" || + { test "$linkmode" != prog && test "$linkmode" != lib; }; then + test -n "$dlopen" && func_append dlfiles " $dlopen" + test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen" + fi + + if test "$pass" = conv; then + # Only check for convenience libraries + deplibs="$lib $deplibs" + if test -z "$libdir"; then + if test -z "$old_library"; then + func_fatal_error "cannot find name of link library for \`$lib'" + fi + # It is a libtool convenience library, so add in its objects. + func_append convenience " $ladir/$objdir/$old_library" + func_append old_convenience " $ladir/$objdir/$old_library" + tmp_libs= + for deplib in $dependency_libs; do + deplibs="$deplib $deplibs" + if $opt_preserve_dup_deps ; then + case "$tmp_libs " in + *" $deplib "*) func_append specialdeplibs " $deplib" ;; + esac + fi + func_append tmp_libs " $deplib" + done + elif test "$linkmode" != prog && test "$linkmode" != lib; then + func_fatal_error "\`$lib' is not a convenience library" + fi + continue + fi # $pass = conv + + + # Get the name of the library we link against. + linklib= + if test -n "$old_library" && + { test "$prefer_static_libs" = yes || + test "$prefer_static_libs,$installed" = "built,no"; }; then + linklib=$old_library + else + for l in $old_library $library_names; do + linklib="$l" + done + fi + if test -z "$linklib"; then + func_fatal_error "cannot find name of link library for \`$lib'" + fi + + # This library was specified with -dlopen. + if test "$pass" = dlopen; then + if test -z "$libdir"; then + func_fatal_error "cannot -dlopen a convenience library: \`$lib'" + fi + if test -z "$dlname" || + test "$dlopen_support" != yes || + test "$build_libtool_libs" = no; then + # If there is no dlname, no dlopen support or we're linking + # statically, we need to preload. We also need to preload any + # dependent libraries so libltdl's deplib preloader doesn't + # bomb out in the load deplibs phase. + func_append dlprefiles " $lib $dependency_libs" + else + func_append newdlfiles " $lib" + fi + continue + fi # $pass = dlopen + + # We need an absolute path. + case $ladir in + [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; + *) + abs_ladir=`cd "$ladir" && pwd` + if test -z "$abs_ladir"; then + func_warning "cannot determine absolute directory name of \`$ladir'" + func_warning "passing it literally to the linker, although it might fail" + abs_ladir="$ladir" + fi + ;; + esac + func_basename "$lib" + laname="$func_basename_result" + + # Find the relevant object directory and library name. + if test "X$installed" = Xyes; then + if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then + func_warning "library \`$lib' was moved." + dir="$ladir" + absdir="$abs_ladir" + libdir="$abs_ladir" + else + dir="$lt_sysroot$libdir" + absdir="$lt_sysroot$libdir" + fi + test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes + else + if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then + dir="$ladir" + absdir="$abs_ladir" + # Remove this search path later + func_append notinst_path " $abs_ladir" + else + dir="$ladir/$objdir" + absdir="$abs_ladir/$objdir" + # Remove this search path later + func_append notinst_path " $abs_ladir" + fi + fi # $installed = yes + func_stripname 'lib' '.la' "$laname" + name=$func_stripname_result + + # This library was specified with -dlpreopen. + if test "$pass" = dlpreopen; then + if test -z "$libdir" && test "$linkmode" = prog; then + func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'" + fi + case "$host" in + # special handling for platforms with PE-DLLs. + *cygwin* | *mingw* | *cegcc* ) + # Linker will automatically link against shared library if both + # static and shared are present. Therefore, ensure we extract + # symbols from the import library if a shared library is present + # (otherwise, the dlopen module name will be incorrect). We do + # this by putting the import library name into $newdlprefiles. + # We recover the dlopen module name by 'saving' the la file + # name in a special purpose variable, and (later) extracting the + # dlname from the la file. + if test -n "$dlname"; then + func_tr_sh "$dir/$linklib" + eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname" + func_append newdlprefiles " $dir/$linklib" + else + func_append newdlprefiles " $dir/$old_library" + # Keep a list of preopened convenience libraries to check + # that they are being used correctly in the link pass. + test -z "$libdir" && \ + func_append dlpreconveniencelibs " $dir/$old_library" + fi + ;; + * ) + # Prefer using a static library (so that no silly _DYNAMIC symbols + # are required to link). + if test -n "$old_library"; then + func_append newdlprefiles " $dir/$old_library" + # Keep a list of preopened convenience libraries to check + # that they are being used correctly in the link pass. + test -z "$libdir" && \ + func_append dlpreconveniencelibs " $dir/$old_library" + # Otherwise, use the dlname, so that lt_dlopen finds it. + elif test -n "$dlname"; then + func_append newdlprefiles " $dir/$dlname" + else + func_append newdlprefiles " $dir/$linklib" + fi + ;; + esac + fi # $pass = dlpreopen + + if test -z "$libdir"; then + # Link the convenience library + if test "$linkmode" = lib; then + deplibs="$dir/$old_library $deplibs" + elif test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$dir/$old_library $compile_deplibs" + finalize_deplibs="$dir/$old_library $finalize_deplibs" + else + deplibs="$lib $deplibs" # used for prog,scan pass + fi + continue + fi + + + if test "$linkmode" = prog && test "$pass" != link; then + func_append newlib_search_path " $ladir" + deplibs="$lib $deplibs" + + linkalldeplibs=no + if test "$link_all_deplibs" != no || test -z "$library_names" || + test "$build_libtool_libs" = no; then + linkalldeplibs=yes + fi + + tmp_libs= + for deplib in $dependency_libs; do + case $deplib in + -L*) func_stripname '-L' '' "$deplib" + func_resolve_sysroot "$func_stripname_result" + func_append newlib_search_path " $func_resolve_sysroot_result" + ;; + esac + # Need to link against all dependency_libs? + if test "$linkalldeplibs" = yes; then + deplibs="$deplib $deplibs" + else + # Need to hardcode shared library paths + # or/and link against static libraries + newdependency_libs="$deplib $newdependency_libs" + fi + if $opt_preserve_dup_deps ; then + case "$tmp_libs " in + *" $deplib "*) func_append specialdeplibs " $deplib" ;; + esac + fi + func_append tmp_libs " $deplib" + done # for deplib + continue + fi # $linkmode = prog... + + if test "$linkmode,$pass" = "prog,link"; then + if test -n "$library_names" && + { { test "$prefer_static_libs" = no || + test "$prefer_static_libs,$installed" = "built,yes"; } || + test -z "$old_library"; }; then + # We need to hardcode the library path + if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then + # Make sure the rpath contains only unique directories. + case "$temp_rpath:" in + *"$absdir:"*) ;; + *) func_append temp_rpath "$absdir:" ;; + esac + fi + + # Hardcode the library path. + # Skip directories that are in the system default run-time + # search path. + case " $sys_lib_dlsearch_path " in + *" $absdir "*) ;; + *) + case "$compile_rpath " in + *" $absdir "*) ;; + *) func_append compile_rpath " $absdir" ;; + esac + ;; + esac + case " $sys_lib_dlsearch_path " in + *" $libdir "*) ;; + *) + case "$finalize_rpath " in + *" $libdir "*) ;; + *) func_append finalize_rpath " $libdir" ;; + esac + ;; + esac + fi # $linkmode,$pass = prog,link... + + if test "$alldeplibs" = yes && + { test "$deplibs_check_method" = pass_all || + { test "$build_libtool_libs" = yes && + test -n "$library_names"; }; }; then + # We only need to search for static libraries + continue + fi + fi + + link_static=no # Whether the deplib will be linked statically + use_static_libs=$prefer_static_libs + if test "$use_static_libs" = built && test "$installed" = yes; then + use_static_libs=no + fi + if test -n "$library_names" && + { test "$use_static_libs" = no || test -z "$old_library"; }; then + case $host in + *cygwin* | *mingw* | *cegcc*) + # No point in relinking DLLs because paths are not encoded + func_append notinst_deplibs " $lib" + need_relink=no + ;; + *) + if test "$installed" = no; then + func_append notinst_deplibs " $lib" + need_relink=yes + fi + ;; + esac + # This is a shared library + + # Warn about portability, can't link against -module's on some + # systems (darwin). Don't bleat about dlopened modules though! + dlopenmodule="" + for dlpremoduletest in $dlprefiles; do + if test "X$dlpremoduletest" = "X$lib"; then + dlopenmodule="$dlpremoduletest" + break + fi + done + if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then + echo + if test "$linkmode" = prog; then + $ECHO "*** Warning: Linking the executable $output against the loadable module" + else + $ECHO "*** Warning: Linking the shared library $output against the loadable module" + fi + $ECHO "*** $linklib is not portable!" + fi + if test "$linkmode" = lib && + test "$hardcode_into_libs" = yes; then + # Hardcode the library path. + # Skip directories that are in the system default run-time + # search path. + case " $sys_lib_dlsearch_path " in + *" $absdir "*) ;; + *) + case "$compile_rpath " in + *" $absdir "*) ;; + *) func_append compile_rpath " $absdir" ;; + esac + ;; + esac + case " $sys_lib_dlsearch_path " in + *" $libdir "*) ;; + *) + case "$finalize_rpath " in + *" $libdir "*) ;; + *) func_append finalize_rpath " $libdir" ;; + esac + ;; + esac + fi + + if test -n "$old_archive_from_expsyms_cmds"; then + # figure out the soname + set dummy $library_names + shift + realname="$1" + shift + libname=`eval "\\$ECHO \"$libname_spec\""` + # use dlname if we got it. it's perfectly good, no? + if test -n "$dlname"; then + soname="$dlname" + elif test -n "$soname_spec"; then + # bleh windows + case $host in + *cygwin* | mingw* | *cegcc*) + func_arith $current - $age + major=$func_arith_result + versuffix="-$major" + ;; + esac + eval soname=\"$soname_spec\" + else + soname="$realname" + fi + + # Make a new name for the extract_expsyms_cmds to use + soroot="$soname" + func_basename "$soroot" + soname="$func_basename_result" + func_stripname 'lib' '.dll' "$soname" + newlib=libimp-$func_stripname_result.a + + # If the library has no export list, then create one now + if test -f "$output_objdir/$soname-def"; then : + else + func_verbose "extracting exported symbol list from \`$soname'" + func_execute_cmds "$extract_expsyms_cmds" 'exit $?' + fi + + # Create $newlib + if test -f "$output_objdir/$newlib"; then :; else + func_verbose "generating import library for \`$soname'" + func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?' + fi + # make sure the library variables are pointing to the new library + dir=$output_objdir + linklib=$newlib + fi # test -n "$old_archive_from_expsyms_cmds" + + if test "$linkmode" = prog || test "$opt_mode" != relink; then + add_shlibpath= + add_dir= + add= + lib_linked=yes + case $hardcode_action in + immediate | unsupported) + if test "$hardcode_direct" = no; then + add="$dir/$linklib" + case $host in + *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; + *-*-sysv4*uw2*) add_dir="-L$dir" ;; + *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ + *-*-unixware7*) add_dir="-L$dir" ;; + *-*-darwin* ) + # if the lib is a (non-dlopened) module then we can not + # link against it, someone is ignoring the earlier warnings + if /usr/bin/file -L $add 2> /dev/null | + $GREP ": [^:]* bundle" >/dev/null ; then + if test "X$dlopenmodule" != "X$lib"; then + $ECHO "*** Warning: lib $linklib is a module, not a shared library" + if test -z "$old_library" ; then + echo + echo "*** And there doesn't seem to be a static archive available" + echo "*** The link will probably fail, sorry" + else + add="$dir/$old_library" + fi + elif test -n "$old_library"; then + add="$dir/$old_library" + fi + fi + esac + elif test "$hardcode_minus_L" = no; then + case $host in + *-*-sunos*) add_shlibpath="$dir" ;; + esac + add_dir="-L$dir" + add="-l$name" + elif test "$hardcode_shlibpath_var" = no; then + add_shlibpath="$dir" + add="-l$name" + else + lib_linked=no + fi + ;; + relink) + if test "$hardcode_direct" = yes && + test "$hardcode_direct_absolute" = no; then + add="$dir/$linklib" + elif test "$hardcode_minus_L" = yes; then + add_dir="-L$absdir" + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then + case $libdir in + [\\/]*) + func_append add_dir " -L$inst_prefix_dir$libdir" + ;; + esac + fi + add="-l$name" + elif test "$hardcode_shlibpath_var" = yes; then + add_shlibpath="$dir" + add="-l$name" + else + lib_linked=no + fi + ;; + *) lib_linked=no ;; + esac + + if test "$lib_linked" != yes; then + func_fatal_configuration "unsupported hardcode properties" + fi + + if test -n "$add_shlibpath"; then + case :$compile_shlibpath: in + *":$add_shlibpath:"*) ;; + *) func_append compile_shlibpath "$add_shlibpath:" ;; + esac + fi + if test "$linkmode" = prog; then + test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" + test -n "$add" && compile_deplibs="$add $compile_deplibs" + else + test -n "$add_dir" && deplibs="$add_dir $deplibs" + test -n "$add" && deplibs="$add $deplibs" + if test "$hardcode_direct" != yes && + test "$hardcode_minus_L" != yes && + test "$hardcode_shlibpath_var" = yes; then + case :$finalize_shlibpath: in + *":$libdir:"*) ;; + *) func_append finalize_shlibpath "$libdir:" ;; + esac + fi + fi + fi + + if test "$linkmode" = prog || test "$opt_mode" = relink; then + add_shlibpath= + add_dir= + add= + # Finalize command for both is simple: just hardcode it. + if test "$hardcode_direct" = yes && + test "$hardcode_direct_absolute" = no; then + add="$libdir/$linklib" + elif test "$hardcode_minus_L" = yes; then + add_dir="-L$libdir" + add="-l$name" + elif test "$hardcode_shlibpath_var" = yes; then + case :$finalize_shlibpath: in + *":$libdir:"*) ;; + *) func_append finalize_shlibpath "$libdir:" ;; + esac + add="-l$name" + elif test "$hardcode_automatic" = yes; then + if test -n "$inst_prefix_dir" && + test -f "$inst_prefix_dir$libdir/$linklib" ; then + add="$inst_prefix_dir$libdir/$linklib" + else + add="$libdir/$linklib" + fi + else + # We cannot seem to hardcode it, guess we'll fake it. + add_dir="-L$libdir" + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then + case $libdir in + [\\/]*) + func_append add_dir " -L$inst_prefix_dir$libdir" + ;; + esac + fi + add="-l$name" + fi + + if test "$linkmode" = prog; then + test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" + test -n "$add" && finalize_deplibs="$add $finalize_deplibs" + else + test -n "$add_dir" && deplibs="$add_dir $deplibs" + test -n "$add" && deplibs="$add $deplibs" + fi + fi + elif test "$linkmode" = prog; then + # Here we assume that one of hardcode_direct or hardcode_minus_L + # is not unsupported. This is valid on all known static and + # shared platforms. + if test "$hardcode_direct" != unsupported; then + test -n "$old_library" && linklib="$old_library" + compile_deplibs="$dir/$linklib $compile_deplibs" + finalize_deplibs="$dir/$linklib $finalize_deplibs" + else + compile_deplibs="-l$name -L$dir $compile_deplibs" + finalize_deplibs="-l$name -L$dir $finalize_deplibs" + fi + elif test "$build_libtool_libs" = yes; then + # Not a shared library + if test "$deplibs_check_method" != pass_all; then + # We're trying link a shared library against a static one + # but the system doesn't support it. + + # Just print a warning and add the library to dependency_libs so + # that the program can be linked against the static library. + echo + $ECHO "*** Warning: This system can not link to static lib archive $lib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have." + if test "$module" = yes; then + echo "*** But as you try to build a module library, libtool will still create " + echo "*** a static module, that should work as long as the dlopening application" + echo "*** is linked with the -dlopen flag to resolve symbols at runtime." + if test -z "$global_symbol_pipe"; then + echo + echo "*** However, this would only work if libtool was able to extract symbol" + echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + echo "*** not find such a program. So, this module is probably useless." + echo "*** \`nm' from GNU binutils and a full rebuild may help." + fi + if test "$build_old_libs" = no; then + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + fi + else + deplibs="$dir/$old_library $deplibs" + link_static=yes + fi + fi # link shared/static library? + + if test "$linkmode" = lib; then + if test -n "$dependency_libs" && + { test "$hardcode_into_libs" != yes || + test "$build_old_libs" = yes || + test "$link_static" = yes; }; then + # Extract -R from dependency_libs + temp_deplibs= + for libdir in $dependency_libs; do + case $libdir in + -R*) func_stripname '-R' '' "$libdir" + temp_xrpath=$func_stripname_result + case " $xrpath " in + *" $temp_xrpath "*) ;; + *) func_append xrpath " $temp_xrpath";; + esac;; + *) func_append temp_deplibs " $libdir";; + esac + done + dependency_libs="$temp_deplibs" + fi + + func_append newlib_search_path " $absdir" + # Link against this library + test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" + # ... and its dependency_libs + tmp_libs= + for deplib in $dependency_libs; do + newdependency_libs="$deplib $newdependency_libs" + case $deplib in + -L*) func_stripname '-L' '' "$deplib" + func_resolve_sysroot "$func_stripname_result";; + *) func_resolve_sysroot "$deplib" ;; + esac + if $opt_preserve_dup_deps ; then + case "$tmp_libs " in + *" $func_resolve_sysroot_result "*) + func_append specialdeplibs " $func_resolve_sysroot_result" ;; + esac + fi + func_append tmp_libs " $func_resolve_sysroot_result" + done + + if test "$link_all_deplibs" != no; then + # Add the search paths of all dependency libraries + for deplib in $dependency_libs; do + path= + case $deplib in + -L*) path="$deplib" ;; + *.la) + func_resolve_sysroot "$deplib" + deplib=$func_resolve_sysroot_result + func_dirname "$deplib" "" "." + dir=$func_dirname_result + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; + *) + absdir=`cd "$dir" && pwd` + if test -z "$absdir"; then + func_warning "cannot determine absolute directory name of \`$dir'" + absdir="$dir" + fi + ;; + esac + if $GREP "^installed=no" $deplib > /dev/null; then + case $host in + *-*-darwin*) + depdepl= + eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` + if test -n "$deplibrary_names" ; then + for tmp in $deplibrary_names ; do + depdepl=$tmp + done + if test -f "$absdir/$objdir/$depdepl" ; then + depdepl="$absdir/$objdir/$depdepl" + darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` + if test -z "$darwin_install_name"; then + darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` + fi + func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" + func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}" + path= + fi + fi + ;; + *) + path="-L$absdir/$objdir" + ;; + esac + else + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + test -z "$libdir" && \ + func_fatal_error "\`$deplib' is not a valid libtool archive" + test "$absdir" != "$libdir" && \ + func_warning "\`$deplib' seems to be moved" + + path="-L$absdir" + fi + ;; + esac + case " $deplibs " in + *" $path "*) ;; + *) deplibs="$path $deplibs" ;; + esac + done + fi # link_all_deplibs != no + fi # linkmode = lib + done # for deplib in $libs + if test "$pass" = link; then + if test "$linkmode" = "prog"; then + compile_deplibs="$new_inherited_linker_flags $compile_deplibs" + finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" + else + compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + fi + fi + dependency_libs="$newdependency_libs" + if test "$pass" = dlpreopen; then + # Link the dlpreopened libraries before other libraries + for deplib in $save_deplibs; do + deplibs="$deplib $deplibs" + done + fi + if test "$pass" != dlopen; then + if test "$pass" != conv; then + # Make sure lib_search_path contains only unique directories. + lib_search_path= + for dir in $newlib_search_path; do + case "$lib_search_path " in + *" $dir "*) ;; + *) func_append lib_search_path " $dir" ;; + esac + done + newlib_search_path= + fi + + if test "$linkmode,$pass" != "prog,link"; then + vars="deplibs" + else + vars="compile_deplibs finalize_deplibs" + fi + for var in $vars dependency_libs; do + # Add libraries to $var in reverse order + eval tmp_libs=\"\$$var\" + new_libs= + for deplib in $tmp_libs; do + # FIXME: Pedantically, this is the right thing to do, so + # that some nasty dependency loop isn't accidentally + # broken: + #new_libs="$deplib $new_libs" + # Pragmatically, this seems to cause very few problems in + # practice: + case $deplib in + -L*) new_libs="$deplib $new_libs" ;; + -R*) ;; + *) + # And here is the reason: when a library appears more + # than once as an explicit dependence of a library, or + # is implicitly linked in more than once by the + # compiler, it is considered special, and multiple + # occurrences thereof are not removed. Compare this + # with having the same library being listed as a + # dependency of multiple other libraries: in this case, + # we know (pedantically, we assume) the library does not + # need to be listed more than once, so we keep only the + # last copy. This is not always right, but it is rare + # enough that we require users that really mean to play + # such unportable linking tricks to link the library + # using -Wl,-lname, so that libtool does not consider it + # for duplicate removal. + case " $specialdeplibs " in + *" $deplib "*) new_libs="$deplib $new_libs" ;; + *) + case " $new_libs " in + *" $deplib "*) ;; + *) new_libs="$deplib $new_libs" ;; + esac + ;; + esac + ;; + esac + done + tmp_libs= + for deplib in $new_libs; do + case $deplib in + -L*) + case " $tmp_libs " in + *" $deplib "*) ;; + *) func_append tmp_libs " $deplib" ;; + esac + ;; + *) func_append tmp_libs " $deplib" ;; + esac + done + eval $var=\"$tmp_libs\" + done # for var + fi + # Last step: remove runtime libs from dependency_libs + # (they stay in deplibs) + tmp_libs= + for i in $dependency_libs ; do + case " $predeps $postdeps $compiler_lib_search_path " in + *" $i "*) + i="" + ;; + esac + if test -n "$i" ; then + func_append tmp_libs " $i" + fi + done + dependency_libs=$tmp_libs + done # for pass + if test "$linkmode" = prog; then + dlfiles="$newdlfiles" + fi + if test "$linkmode" = prog || test "$linkmode" = lib; then + dlprefiles="$newdlprefiles" + fi + + case $linkmode in + oldlib) + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + func_warning "\`-dlopen' is ignored for archives" + fi + + case " $deplibs" in + *\ -l* | *\ -L*) + func_warning "\`-l' and \`-L' are ignored for archives" ;; + esac + + test -n "$rpath" && \ + func_warning "\`-rpath' is ignored for archives" + + test -n "$xrpath" && \ + func_warning "\`-R' is ignored for archives" + + test -n "$vinfo" && \ + func_warning "\`-version-info/-version-number' is ignored for archives" + + test -n "$release" && \ + func_warning "\`-release' is ignored for archives" + + test -n "$export_symbols$export_symbols_regex" && \ + func_warning "\`-export-symbols' is ignored for archives" + + # Now set the variables for building old libraries. + build_libtool_libs=no + oldlibs="$output" + func_append objs "$old_deplibs" + ;; + + lib) + # Make sure we only generate libraries of the form `libNAME.la'. + case $outputname in + lib*) + func_stripname 'lib' '.la' "$outputname" + name=$func_stripname_result + eval shared_ext=\"$shrext_cmds\" + eval libname=\"$libname_spec\" + ;; + *) + test "$module" = no && \ + func_fatal_help "libtool library \`$output' must begin with \`lib'" + + if test "$need_lib_prefix" != no; then + # Add the "lib" prefix for modules if required + func_stripname '' '.la' "$outputname" + name=$func_stripname_result + eval shared_ext=\"$shrext_cmds\" + eval libname=\"$libname_spec\" + else + func_stripname '' '.la' "$outputname" + libname=$func_stripname_result + fi + ;; + esac + + if test -n "$objs"; then + if test "$deplibs_check_method" != pass_all; then + func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs" + else + echo + $ECHO "*** Warning: Linking the shared library $output against the non-libtool" + $ECHO "*** objects $objs is not portable!" + func_append libobjs " $objs" + fi + fi + + test "$dlself" != no && \ + func_warning "\`-dlopen self' is ignored for libtool libraries" + + set dummy $rpath + shift + test "$#" -gt 1 && \ + func_warning "ignoring multiple \`-rpath's for a libtool library" + + install_libdir="$1" + + oldlibs= + if test -z "$rpath"; then + if test "$build_libtool_libs" = yes; then + # Building a libtool convenience library. + # Some compilers have problems with a `.al' extension so + # convenience libraries should have the same extension an + # archive normally would. + oldlibs="$output_objdir/$libname.$libext $oldlibs" + build_libtool_libs=convenience + build_old_libs=yes + fi + + test -n "$vinfo" && \ + func_warning "\`-version-info/-version-number' is ignored for convenience libraries" + + test -n "$release" && \ + func_warning "\`-release' is ignored for convenience libraries" + else + + # Parse the version information argument. + save_ifs="$IFS"; IFS=':' + set dummy $vinfo 0 0 0 + shift + IFS="$save_ifs" + + test -n "$7" && \ + func_fatal_help "too many parameters to \`-version-info'" + + # convert absolute version numbers to libtool ages + # this retains compatibility with .la files and attempts + # to make the code below a bit more comprehensible + + case $vinfo_number in + yes) + number_major="$1" + number_minor="$2" + number_revision="$3" + # + # There are really only two kinds -- those that + # use the current revision as the major version + # and those that subtract age and use age as + # a minor version. But, then there is irix + # which has an extra 1 added just for fun + # + case $version_type in + # correct linux to gnu/linux during the next big refactor + darwin|linux|osf|windows|none) + func_arith $number_major + $number_minor + current=$func_arith_result + age="$number_minor" + revision="$number_revision" + ;; + freebsd-aout|freebsd-elf|qnx|sunos) + current="$number_major" + revision="$number_minor" + age="0" + ;; + irix|nonstopux) + func_arith $number_major + $number_minor + current=$func_arith_result + age="$number_minor" + revision="$number_minor" + lt_irix_increment=no + ;; + *) + func_fatal_configuration "$modename: unknown library version type \`$version_type'" + ;; + esac + ;; + no) + current="$1" + revision="$2" + age="$3" + ;; + esac + + # Check that each of the things are valid numbers. + case $current in + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) + func_error "CURRENT \`$current' must be a nonnegative integer" + func_fatal_error "\`$vinfo' is not valid version information" + ;; + esac + + case $revision in + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) + func_error "REVISION \`$revision' must be a nonnegative integer" + func_fatal_error "\`$vinfo' is not valid version information" + ;; + esac + + case $age in + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) + func_error "AGE \`$age' must be a nonnegative integer" + func_fatal_error "\`$vinfo' is not valid version information" + ;; + esac + + if test "$age" -gt "$current"; then + func_error "AGE \`$age' is greater than the current interface number \`$current'" + func_fatal_error "\`$vinfo' is not valid version information" + fi + + # Calculate the version variables. + major= + versuffix= + verstring= + case $version_type in + none) ;; + + darwin) + # Like Linux, but with the current version available in + # verstring for coding it into the library header + func_arith $current - $age + major=.$func_arith_result + versuffix="$major.$age.$revision" + # Darwin ld doesn't like 0 for these options... + func_arith $current + 1 + minor_current=$func_arith_result + xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" + verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" + ;; + + freebsd-aout) + major=".$current" + versuffix=".$current.$revision"; + ;; + + freebsd-elf) + major=".$current" + versuffix=".$current" + ;; + + irix | nonstopux) + if test "X$lt_irix_increment" = "Xno"; then + func_arith $current - $age + else + func_arith $current - $age + 1 + fi + major=$func_arith_result + + case $version_type in + nonstopux) verstring_prefix=nonstopux ;; + *) verstring_prefix=sgi ;; + esac + verstring="$verstring_prefix$major.$revision" + + # Add in all the interfaces that we are compatible with. + loop=$revision + while test "$loop" -ne 0; do + func_arith $revision - $loop + iface=$func_arith_result + func_arith $loop - 1 + loop=$func_arith_result + verstring="$verstring_prefix$major.$iface:$verstring" + done + + # Before this point, $major must not contain `.'. + major=.$major + versuffix="$major.$revision" + ;; + + linux) # correct to gnu/linux during the next big refactor + func_arith $current - $age + major=.$func_arith_result + versuffix="$major.$age.$revision" + ;; + + osf) + func_arith $current - $age + major=.$func_arith_result + versuffix=".$current.$age.$revision" + verstring="$current.$age.$revision" + + # Add in all the interfaces that we are compatible with. + loop=$age + while test "$loop" -ne 0; do + func_arith $current - $loop + iface=$func_arith_result + func_arith $loop - 1 + loop=$func_arith_result + verstring="$verstring:${iface}.0" + done + + # Make executables depend on our current version. + func_append verstring ":${current}.0" + ;; + + qnx) + major=".$current" + versuffix=".$current" + ;; + + sunos) + major=".$current" + versuffix=".$current.$revision" + ;; + + windows) + # Use '-' rather than '.', since we only want one + # extension on DOS 8.3 filesystems. + func_arith $current - $age + major=$func_arith_result + versuffix="-$major" + ;; + + *) + func_fatal_configuration "unknown library version type \`$version_type'" + ;; + esac + + # Clear the version info if we defaulted, and they specified a release. + if test -z "$vinfo" && test -n "$release"; then + major= + case $version_type in + darwin) + # we can't check for "0.0" in archive_cmds due to quoting + # problems, so we reset it completely + verstring= + ;; + *) + verstring="0.0" + ;; + esac + if test "$need_version" = no; then + versuffix= + else + versuffix=".0.0" + fi + fi + + # Remove version info from name if versioning should be avoided + if test "$avoid_version" = yes && test "$need_version" = no; then + major= + versuffix= + verstring="" + fi + + # Check to see if the archive will have undefined symbols. + if test "$allow_undefined" = yes; then + if test "$allow_undefined_flag" = unsupported; then + func_warning "undefined symbols not allowed in $host shared libraries" + build_libtool_libs=no + build_old_libs=yes + fi + else + # Don't allow undefined symbols. + allow_undefined_flag="$no_undefined_flag" + fi + + fi + + func_generate_dlsyms "$libname" "$libname" "yes" + func_append libobjs " $symfileobj" + test "X$libobjs" = "X " && libobjs= + + if test "$opt_mode" != relink; then + # Remove our outputs, but don't remove object files since they + # may have been created when compiling PIC objects. + removelist= + tempremovelist=`$ECHO "$output_objdir/*"` + for p in $tempremovelist; do + case $p in + *.$objext | *.gcno) + ;; + $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) + if test "X$precious_files_regex" != "X"; then + if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 + then + continue + fi + fi + func_append removelist " $p" + ;; + *) ;; + esac + done + test -n "$removelist" && \ + func_show_eval "${RM}r \$removelist" + fi + + # Now set the variables for building old libraries. + if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then + func_append oldlibs " $output_objdir/$libname.$libext" + + # Transform .lo files to .o files. + oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP` + fi + + # Eliminate all temporary directories. + #for path in $notinst_path; do + # lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"` + # deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"` + # dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"` + #done + + if test -n "$xrpath"; then + # If the user specified any rpath flags, then add them. + temp_xrpath= + for libdir in $xrpath; do + func_replace_sysroot "$libdir" + func_append temp_xrpath " -R$func_replace_sysroot_result" + case "$finalize_rpath " in + *" $libdir "*) ;; + *) func_append finalize_rpath " $libdir" ;; + esac + done + if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then + dependency_libs="$temp_xrpath $dependency_libs" + fi + fi + + # Make sure dlfiles contains only unique files that won't be dlpreopened + old_dlfiles="$dlfiles" + dlfiles= + for lib in $old_dlfiles; do + case " $dlprefiles $dlfiles " in + *" $lib "*) ;; + *) func_append dlfiles " $lib" ;; + esac + done + + # Make sure dlprefiles contains only unique files + old_dlprefiles="$dlprefiles" + dlprefiles= + for lib in $old_dlprefiles; do + case "$dlprefiles " in + *" $lib "*) ;; + *) func_append dlprefiles " $lib" ;; + esac + done + + if test "$build_libtool_libs" = yes; then + if test -n "$rpath"; then + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*) + # these systems don't actually have a c library (as such)! + ;; + *-*-rhapsody* | *-*-darwin1.[012]) + # Rhapsody C library is in the System framework + func_append deplibs " System.ltframework" + ;; + *-*-netbsd*) + # Don't link with libc until the a.out ld.so is fixed. + ;; + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc due to us having libc/libc_r. + ;; + *-*-sco3.2v5* | *-*-sco5v6*) + # Causes problems with __ctype + ;; + *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) + # Compiler inserts libc in the correct place for threads to work + ;; + *) + # Add libc to deplibs on all other systems if necessary. + if test "$build_libtool_need_lc" = "yes"; then + func_append deplibs " -lc" + fi + ;; + esac + fi + + # Transform deplibs into only deplibs that can be linked in shared. + name_save=$name + libname_save=$libname + release_save=$release + versuffix_save=$versuffix + major_save=$major + # I'm not sure if I'm treating the release correctly. I think + # release should show up in the -l (ie -lgmp5) so we don't want to + # add it in twice. Is that correct? + release="" + versuffix="" + major="" + newdeplibs= + droppeddeps=no + case $deplibs_check_method in + pass_all) + # Don't check for shared/static. Everything works. + # This might be a little naive. We might want to check + # whether the library exists or not. But this is on + # osf3 & osf4 and I'm not really sure... Just + # implementing what was already the behavior. + newdeplibs=$deplibs + ;; + test_compile) + # This code stresses the "libraries are programs" paradigm to its + # limits. Maybe even breaks it. We compile a program, linking it + # against the deplibs as a proxy for the library. Then we can check + # whether they linked in statically or dynamically with ldd. + $opt_dry_run || $RM conftest.c + cat > conftest.c </dev/null` + $nocaseglob + else + potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null` + fi + for potent_lib in $potential_libs; do + # Follow soft links. + if ls -lLd "$potent_lib" 2>/dev/null | + $GREP " -> " >/dev/null; then + continue + fi + # The statement above tries to avoid entering an + # endless loop below, in case of cyclic links. + # We might still enter an endless loop, since a link + # loop can be closed while we follow links, + # but so what? + potlib="$potent_lib" + while test -h "$potlib" 2>/dev/null; do + potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` + case $potliblink in + [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; + *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";; + esac + done + if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | + $SED -e 10q | + $EGREP "$file_magic_regex" > /dev/null; then + func_append newdeplibs " $a_deplib" + a_deplib="" + break 2 + fi + done + done + fi + if test -n "$a_deplib" ; then + droppeddeps=yes + echo + $ECHO "*** Warning: linker path does not have real file for library $a_deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have" + echo "*** because I did check the linker path looking for a file starting" + if test -z "$potlib" ; then + $ECHO "*** with $libname but no candidates were found. (...for file magic test)" + else + $ECHO "*** with $libname and none of the candidates passed a file format test" + $ECHO "*** using a file magic. Last file checked: $potlib" + fi + fi + ;; + *) + # Add a -L argument. + func_append newdeplibs " $a_deplib" + ;; + esac + done # Gone through all deplibs. + ;; + match_pattern*) + set dummy $deplibs_check_method; shift + match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` + for a_deplib in $deplibs; do + case $a_deplib in + -l*) + func_stripname -l '' "$a_deplib" + name=$func_stripname_result + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $a_deplib "*) + func_append newdeplibs " $a_deplib" + a_deplib="" + ;; + esac + fi + if test -n "$a_deplib" ; then + libname=`eval "\\$ECHO \"$libname_spec\""` + for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do + potential_libs=`ls $i/$libname[.-]* 2>/dev/null` + for potent_lib in $potential_libs; do + potlib="$potent_lib" # see symlink-check above in file_magic test + if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \ + $EGREP "$match_pattern_regex" > /dev/null; then + func_append newdeplibs " $a_deplib" + a_deplib="" + break 2 + fi + done + done + fi + if test -n "$a_deplib" ; then + droppeddeps=yes + echo + $ECHO "*** Warning: linker path does not have real file for library $a_deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have" + echo "*** because I did check the linker path looking for a file starting" + if test -z "$potlib" ; then + $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" + else + $ECHO "*** with $libname and none of the candidates passed a file format test" + $ECHO "*** using a regex pattern. Last file checked: $potlib" + fi + fi + ;; + *) + # Add a -L argument. + func_append newdeplibs " $a_deplib" + ;; + esac + done # Gone through all deplibs. + ;; + none | unknown | *) + newdeplibs="" + tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'` + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + for i in $predeps $postdeps ; do + # can't use Xsed below, because $i might contain '/' + tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"` + done + fi + case $tmp_deplibs in + *[!\ \ ]*) + echo + if test "X$deplibs_check_method" = "Xnone"; then + echo "*** Warning: inter-library dependencies are not supported in this platform." + else + echo "*** Warning: inter-library dependencies are not known to be supported." + fi + echo "*** All declared inter-library dependencies are being dropped." + droppeddeps=yes + ;; + esac + ;; + esac + versuffix=$versuffix_save + major=$major_save + release=$release_save + libname=$libname_save + name=$name_save - # Find the directory that this script lives in. - thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` - test \"x\$thisdir\" = \"x\$file\" && thisdir=. + case $host in + *-*-rhapsody* | *-*-darwin1.[012]) + # On Rhapsody replace the C library with the System framework + newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'` + ;; + esac - # Follow symbolic links until we get to the real thisdir. - file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` - while test -n \"\$file\"; do - destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` + if test "$droppeddeps" = yes; then + if test "$module" = yes; then + echo + echo "*** Warning: libtool could not satisfy all declared inter-library" + $ECHO "*** dependencies of module $libname. Therefore, libtool will create" + echo "*** a static module, that should work as long as the dlopening" + echo "*** application is linked with the -dlopen flag." + if test -z "$global_symbol_pipe"; then + echo + echo "*** However, this would only work if libtool was able to extract symbol" + echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + echo "*** not find such a program. So, this module is probably useless." + echo "*** \`nm' from GNU binutils and a full rebuild may help." + fi + if test "$build_old_libs" = no; then + oldlibs="$output_objdir/$libname.$libext" + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + else + echo "*** The inter-library dependencies that have been dropped here will be" + echo "*** automatically added whenever a program is linked with this library" + echo "*** or is declared to -dlopen it." - # If there was a directory component, then change thisdir. - if test \"x\$destdir\" != \"x\$file\"; then - case \"\$destdir\" in - [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; - *) thisdir=\"\$thisdir/\$destdir\" ;; + if test "$allow_undefined" = no; then + echo + echo "*** Since this library must not contain undefined symbols," + echo "*** because either the platform does not support them or" + echo "*** it was explicitly requested with -no-undefined," + echo "*** libtool will only create a static version of it." + if test "$build_old_libs" = no; then + oldlibs="$output_objdir/$libname.$libext" + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + fi + fi + fi + # Done checking deplibs! + deplibs=$newdeplibs + fi + # Time to change all our "foo.ltframework" stuff back to "-framework foo" + case $host in + *-*-darwin*) + newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + ;; esac - fi - - file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\` - file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` - done - - # Try to get the absolute directory name. - absdir=\`cd \"\$thisdir\" && pwd\` - test -n \"\$absdir\" && thisdir=\"\$absdir\" -" - - if test "$fast_install" = yes; then - $echo >> $output "\ - program=lt-'$outputname'$exeext - progdir=\"\$thisdir/$objdir\" - - if test ! -f \"\$progdir/\$program\" || \\ - { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ - test \"X\$file\" != \"X\$progdir/\$program\"; }; then - - file=\"\$\$-\$program\" - - if test ! -d \"\$progdir\"; then - $mkdir \"\$progdir\" - else - $rm \"\$progdir/\$file\" - fi" - $echo >> $output "\ + # move library search paths that coincide with paths to not yet + # installed libraries to the beginning of the library search list + new_libs= + for path in $notinst_path; do + case " $new_libs " in + *" -L$path/$objdir "*) ;; + *) + case " $deplibs " in + *" -L$path/$objdir "*) + func_append new_libs " -L$path/$objdir" ;; + esac + ;; + esac + done + for deplib in $deplibs; do + case $deplib in + -L*) + case " $new_libs " in + *" $deplib "*) ;; + *) func_append new_libs " $deplib" ;; + esac + ;; + *) func_append new_libs " $deplib" ;; + esac + done + deplibs="$new_libs" - # relink executable if necessary - if test -n \"\$relink_command\"; then - if relink_command_output=\`eval \$relink_command 2>&1\`; then : - else - $echo \"\$relink_command_output\" >&2 - $rm \"\$progdir/\$file\" - exit $EXIT_FAILURE - fi - fi + # All the library-specific variables (install_libdir is set above). + library_names= + old_library= + dlname= - $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || - { $rm \"\$progdir/\$program\"; - $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; } - $rm \"\$progdir/\$file\" - fi" - else - $echo >> $output "\ - program='$outputname' - progdir=\"\$thisdir/$objdir\" -" + # Test again, we may have decided not to build it any more + if test "$build_libtool_libs" = yes; then + # Remove ${wl} instances when linking with ld. + # FIXME: should test the right _cmds variable. + case $archive_cmds in + *\$LD\ *) wl= ;; + esac + if test "$hardcode_into_libs" = yes; then + # Hardcode the library paths + hardcode_libdirs= + dep_rpath= + rpath="$finalize_rpath" + test "$opt_mode" != relink && rpath="$compile_rpath$rpath" + for libdir in $rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + func_replace_sysroot "$libdir" + libdir=$func_replace_sysroot_result + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + func_append dep_rpath " $flag" + fi + elif test -n "$runpath_var"; then + case "$perm_rpath " in + *" $libdir "*) ;; + *) func_append perm_rpath " $libdir" ;; + esac + fi + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + eval "dep_rpath=\"$hardcode_libdir_flag_spec\"" + fi + if test -n "$runpath_var" && test -n "$perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $perm_rpath; do + func_append rpath "$dir:" + done + eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" + fi + test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" fi - $echo >> $output "\ - - if test -f \"\$progdir/\$program\"; then" - - # Export our shlibpath_var if we have one. - if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then - $echo >> $output "\ - # Add our own library path to $shlibpath_var - $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" + shlibpath="$finalize_shlibpath" + test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath" + if test -n "$shlibpath"; then + eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" + fi - # Some systems cannot cope with colon-terminated $shlibpath_var - # The second colon is a workaround for a bug in BeOS R4 sed - $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` + # Get the real and link names of the library. + eval shared_ext=\"$shrext_cmds\" + eval library_names=\"$library_names_spec\" + set dummy $library_names + shift + realname="$1" + shift - export $shlibpath_var -" + if test -n "$soname_spec"; then + eval soname=\"$soname_spec\" + else + soname="$realname" fi - - # fixup the dll searchpath if we need to. - if test -n "$dllsearchpath"; then - $echo >> $output "\ - # Add the dll search path components to the executable PATH - PATH=$dllsearchpath:\$PATH -" + if test -z "$dlname"; then + dlname=$soname fi - $echo >> $output "\ - if test \"\$libtool_execute_magic\" != \"$magic\"; then - # Run the actual program with our arguments. + lib="$output_objdir/$realname" + linknames= + for link + do + func_append linknames " $link" + done - # Make sure env LD_LIBRARY_PATH does not mess us up - if test -n \"\${LD_LIBRARY_PATH+set}\"; then - export LD_LIBRARY_PATH=\$progdir:\$LD_LIBRARY_PATH - fi -" - case $host in - # Backslashes separate directories on plain windows - *-*-mingw | *-*-os2*) - $echo >> $output "\ - exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} -" - ;; + # Use standard objects if they are pic + test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP` + test "X$libobjs" = "X " && libobjs= - *) - $echo >> $output "\ - exec \"\$progdir/\$program\" \${1+\"\$@\"} -" + delfiles= + if test -n "$export_symbols" && test -n "$include_expsyms"; then + $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" + export_symbols="$output_objdir/$libname.uexp" + func_append delfiles " $export_symbols" + fi + + orig_export_symbols= + case $host_os in + cygwin* | mingw* | cegcc*) + if test -n "$export_symbols" && test -z "$export_symbols_regex"; then + # exporting using user supplied symfile + if test "x`$SED 1q $export_symbols`" != xEXPORTS; then + # and it's NOT already a .def file. Must figure out + # which of the given symbols are data symbols and tag + # them as such. So, trigger use of export_symbols_cmds. + # export_symbols gets reassigned inside the "prepare + # the list of exported symbols" if statement, so the + # include_expsyms logic still works. + orig_export_symbols="$export_symbols" + export_symbols= + always_export_symbols=yes + fi + fi ;; esac - $echo >> $output "\ - \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\" - exit $EXIT_FAILURE - fi - else - # The program doesn't exist. - \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 - \$echo \"This script is just a wrapper for \$program.\" 1>&2 - $echo \"See the $PACKAGE documentation for more information.\" 1>&2 - exit $EXIT_FAILURE - fi -fi\ -" - chmod +x $output - fi - exit $EXIT_SUCCESS - ;; - esac - - # See if we need to build an old-fashioned archive. - for oldlib in $oldlibs; do - if test "$build_libtool_libs" = convenience; then - oldobjs="$libobjs_save" - addlibs="$convenience" - build_libtool_libs=no - else - if test "$build_libtool_libs" = module; then - oldobjs="$libobjs_save" - build_libtool_libs=no - else - oldobjs="$old_deplibs $non_pic_objects" + # Prepare the list of exported symbols + if test -z "$export_symbols"; then + if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then + func_verbose "generating symbol list for \`$libname.la'" + export_symbols="$output_objdir/$libname.exp" + $opt_dry_run || $RM $export_symbols + cmds=$export_symbols_cmds + save_ifs="$IFS"; IFS='~' + for cmd1 in $cmds; do + IFS="$save_ifs" + # Take the normal branch if the nm_file_list_spec branch + # doesn't work or if tool conversion is not needed. + case $nm_file_list_spec~$to_tool_file_cmd in + *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*) + try_normal_branch=yes + eval cmd=\"$cmd1\" + func_len " $cmd" + len=$func_len_result + ;; + *) + try_normal_branch=no + ;; + esac + if test "$try_normal_branch" = yes \ + && { test "$len" -lt "$max_cmd_len" \ + || test "$max_cmd_len" -le -1; } + then + func_show_eval "$cmd" 'exit $?' + skipped_export=false + elif test -n "$nm_file_list_spec"; then + func_basename "$output" + output_la=$func_basename_result + save_libobjs=$libobjs + save_output=$output + output=${output_objdir}/${output_la}.nm + func_to_tool_file "$output" + libobjs=$nm_file_list_spec$func_to_tool_file_result + func_append delfiles " $output" + func_verbose "creating $NM input file list: $output" + for obj in $save_libobjs; do + func_to_tool_file "$obj" + $ECHO "$func_to_tool_file_result" + done > "$output" + eval cmd=\"$cmd1\" + func_show_eval "$cmd" 'exit $?' + output=$save_output + libobjs=$save_libobjs + skipped_export=false + else + # The command line is too long to execute in one step. + func_verbose "using reloadable object file for export list..." + skipped_export=: + # Break out early, otherwise skipped_export may be + # set to false by a later but shorter cmd. + break + fi + done + IFS="$save_ifs" + if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then + func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' + func_show_eval '$MV "${export_symbols}T" "$export_symbols"' + fi + fi fi - addlibs="$old_convenience" - fi - - if test -n "$addlibs"; then - gentop="$output_objdir/${outputname}x" - generated="$generated $gentop" - func_extract_archives $gentop $addlibs - oldobjs="$oldobjs $func_extract_archives_result" - fi + if test -n "$export_symbols" && test -n "$include_expsyms"; then + tmp_export_symbols="$export_symbols" + test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" + $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' + fi + + if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then + # The given exports_symbols file has to be filtered, so filter it. + func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" + # FIXME: $output_objdir/$libname.filter potentially contains lots of + # 's' commands which not all seds can handle. GNU sed should be fine + # though. Also, the filter scales superlinearly with the number of + # global variables. join(1) would be nice here, but unfortunately + # isn't a blessed tool. + $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter + func_append delfiles " $export_symbols $output_objdir/$libname.filter" + export_symbols=$output_objdir/$libname.def + $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols + fi - # Do each command in the archive commands. - if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then - cmds=$old_archive_from_new_cmds - else - # POSIX demands no paths to be encoded in archives. We have - # to avoid creating archives with duplicate basenames if we - # might have to extract them afterwards, e.g., when creating a - # static archive out of a convenience library, or when linking - # the entirety of a libtool archive into another (currently - # not supported by libtool). - if (for obj in $oldobjs - do - $echo "X$obj" | $Xsed -e 's%^.*/%%' - done | sort | sort -uc >/dev/null 2>&1); then - : - else - $echo "copying selected object files to avoid basename conflicts..." + tmp_deplibs= + for test_deplib in $deplibs; do + case " $convenience " in + *" $test_deplib "*) ;; + *) + func_append tmp_deplibs " $test_deplib" + ;; + esac + done + deplibs="$tmp_deplibs" - if test -z "$gentop"; then + if test -n "$convenience"; then + if test -n "$whole_archive_flag_spec" && + test "$compiler_needs_object" = yes && + test -z "$libobjs"; then + # extract the archives, so we have objects to list. + # TODO: could optimize this to just extract one archive. + whole_archive_flag_spec= + fi + if test -n "$whole_archive_flag_spec"; then + save_libobjs=$libobjs + eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + test "X$libobjs" = "X " && libobjs= + else gentop="$output_objdir/${outputname}x" - generated="$generated $gentop" + func_append generated " $gentop" - $show "${rm}r $gentop" - $run ${rm}r "$gentop" - $show "$mkdir $gentop" - $run $mkdir "$gentop" - status=$? - if test "$status" -ne 0 && test ! -d "$gentop"; then - exit $status - fi + func_extract_archives $gentop $convenience + func_append libobjs " $func_extract_archives_result" + test "X$libobjs" = "X " && libobjs= fi + fi - save_oldobjs=$oldobjs - oldobjs= - counter=1 - for obj in $save_oldobjs - do - objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` - case " $oldobjs " in - " ") oldobjs=$obj ;; - *[\ /]"$objbase "*) - while :; do - # Make sure we don't pick an alternate name that also - # overlaps. - newobj=lt$counter-$objbase - counter=`expr $counter + 1` - case " $oldobjs " in - *[\ /]"$newobj "*) ;; - *) if test ! -f "$gentop/$newobj"; then break; fi ;; - esac - done - $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" - $run ln "$obj" "$gentop/$newobj" || - $run cp "$obj" "$gentop/$newobj" - oldobjs="$oldobjs $gentop/$newobj" - ;; - *) oldobjs="$oldobjs $obj" ;; - esac - done + if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then + eval flag=\"$thread_safe_flag_spec\" + func_append linker_flags " $flag" fi - eval cmds=\"$old_archive_cmds\" + # Make a backup of the uninstalled library when relinking + if test "$opt_mode" = relink; then + $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? + fi - if len=`expr "X$cmds" : ".*"` && - test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then - cmds=$old_archive_cmds + # Do each of the archive commands. + if test "$module" = yes && test -n "$module_cmds" ; then + if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then + eval test_cmds=\"$module_expsym_cmds\" + cmds=$module_expsym_cmds + else + eval test_cmds=\"$module_cmds\" + cmds=$module_cmds + fi else - # the command line is too long to link in one step, link in parts - $echo "using piecewise archive linking..." - save_RANLIB=$RANLIB - RANLIB=: - objlist= - concat_cmds= - save_oldobjs=$oldobjs - - # Is there a better way of finding the last object in the list? - for obj in $save_oldobjs - do - last_oldobj=$obj - done - for obj in $save_oldobjs - do - oldobjs="$objlist $obj" - objlist="$objlist $obj" - eval test_cmds=\"$old_archive_cmds\" - if len=`expr "X$test_cmds" : ".*" 2>/dev/null` && - test "$len" -le "$max_cmd_len"; then - : - else - # the above command should be used before it gets too long - oldobjs=$objlist - if test "$obj" = "$last_oldobj" ; then - RANLIB=$save_RANLIB - fi - test -z "$concat_cmds" || concat_cmds=$concat_cmds~ - eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" - objlist= - fi - done - RANLIB=$save_RANLIB - oldobjs=$objlist - if test "X$oldobjs" = "X" ; then - eval cmds=\"\$concat_cmds\" + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + eval test_cmds=\"$archive_expsym_cmds\" + cmds=$archive_expsym_cmds else - eval cmds=\"\$concat_cmds~\$old_archive_cmds\" + eval test_cmds=\"$archive_cmds\" + cmds=$archive_cmds fi fi - fi - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - eval cmd=\"$cmd\" - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - done - - if test -n "$generated"; then - $show "${rm}r$generated" - $run ${rm}r$generated - fi - - # Now create the libtool archive. - case $output in - *.la) - old_library= - test "$build_old_libs" = yes && old_library="$libname.$libext" - $show "creating $output" - # Preserve any variables that may affect compiler behavior - for var in $variables_saved_for_relink; do - if eval test -z \"\${$var+set}\"; then - relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" - elif eval var_value=\$$var; test -z "$var_value"; then - relink_command="$var=; export $var; $relink_command" + if test "X$skipped_export" != "X:" && + func_len " $test_cmds" && + len=$func_len_result && + test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then + : else - var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` - relink_command="$var=\"$var_value\"; export $var; $relink_command" - fi - done - # Quote the link command for shipping. - relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" - relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` - if test "$hardcode_automatic" = yes ; then - relink_command= - fi + # The command line is too long to link in one step, link piecewise + # or, if using GNU ld and skipped_export is not :, use a linker + # script. + # Save the value of $output and $libobjs because we want to + # use them later. If we have whole_archive_flag_spec, we + # want to use save_libobjs as it was before + # whole_archive_flag_spec was expanded, because we can't + # assume the linker understands whole_archive_flag_spec. + # This may have to be revisited, in case too many + # convenience libraries get linked in and end up exceeding + # the spec. + if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then + save_libobjs=$libobjs + fi + save_output=$output + func_basename "$output" + output_la=$func_basename_result - # Only create the output if not a dry run. - if test -z "$run"; then - for installed in no yes; do - if test "$installed" = yes; then - if test -z "$install_libdir"; then - break + # Clear the reloadable object creation command queue and + # initialize k to one. + test_cmds= + concat_cmds= + objlist= + last_robj= + k=1 + + if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then + output=${output_objdir}/${output_la}.lnkscript + func_verbose "creating GNU ld script: $output" + echo 'INPUT (' > $output + for obj in $save_libobjs + do + func_to_tool_file "$obj" + $ECHO "$func_to_tool_file_result" >> $output + done + echo ')' >> $output + func_append delfiles " $output" + func_to_tool_file "$output" + output=$func_to_tool_file_result + elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then + output=${output_objdir}/${output_la}.lnk + func_verbose "creating linker input file list: $output" + : > $output + set x $save_libobjs + shift + firstobj= + if test "$compiler_needs_object" = yes; then + firstobj="$1 " + shift fi - output="$output_objdir/$outputname"i - # Replace all uninstalled libtool libraries with the installed ones - newdependency_libs= - for deplib in $dependency_libs; do - case $deplib in - *.la) - name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'` - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` - if test -z "$libdir"; then - $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 - exit $EXIT_FAILURE - fi - if test "X$EGREP" = X ; then - EGREP=egrep - fi - # We do not want portage's install root ($D) present. Check only for - # this if the .la is being installed. - if test "$installed" = yes && test "$D"; then - eval mynewdependency_lib=`echo "$libdir/$name" |sed -e "s:$D:/:g" -e 's:/\+:/:g'` + for obj + do + func_to_tool_file "$obj" + $ECHO "$func_to_tool_file_result" >> $output + done + func_append delfiles " $output" + func_to_tool_file "$output" + output=$firstobj\"$file_list_spec$func_to_tool_file_result\" + else + if test -n "$save_libobjs"; then + func_verbose "creating reloadable object files..." + output=$output_objdir/$output_la-${k}.$objext + eval test_cmds=\"$reload_cmds\" + func_len " $test_cmds" + len0=$func_len_result + len=$len0 + + # Loop over the list of objects to be linked. + for obj in $save_libobjs + do + func_len " $obj" + func_arith $len + $func_len_result + len=$func_arith_result + if test "X$objlist" = X || + test "$len" -lt "$max_cmd_len"; then + func_append objlist " $obj" else - mynewdependency_lib="$libdir/$name" - fi - # Do not add duplicates - if test "$mynewdependency_lib"; then - my_little_ninja_foo_1=`echo $newdependency_libs |$EGREP -e "$mynewdependency_lib"` - if test -z "$my_little_ninja_foo_1"; then - newdependency_libs="$newdependency_libs $mynewdependency_lib" - fi - fi - ;; - *) - if test "$installed" = yes; then - # Rather use S=WORKDIR if our version of portage supports it. - # This is because some ebuild (gcc) do not use $S as buildroot. - if test "$PWORKDIR"; then - S="$PWORKDIR" - fi - # We do not want portage's build root ($S) present. - my_little_ninja_foo_2=`echo $deplib |$EGREP -e "$S"` - # We do not want portage's install root ($D) present. - my_little_ninja_foo_3=`echo $deplib |$EGREP -e "$D"` - if test -n "$my_little_ninja_foo_2" && test "$S"; then - mynewdependency_lib="" - elif test -n "$my_little_ninja_foo_3" && test "$D"; then - eval mynewdependency_lib=`echo "$deplib" |sed -e "s:$D:/:g" -e 's:/\+:/:g'` + # The command $test_cmds is almost too long, add a + # command to the queue. + if test "$k" -eq 1 ; then + # The first file doesn't have a previous command to add. + reload_objs=$objlist + eval concat_cmds=\"$reload_cmds\" else - mynewdependency_lib="$deplib" - fi - else - mynewdependency_lib="$deplib" - fi - # Do not add duplicates - if test "$mynewdependency_lib"; then - my_little_ninja_foo_4=`echo $newdependency_libs |$EGREP -e "$mynewdependency_lib"` - if test -z "$my_little_ninja_foo_4"; then - newdependency_libs="$newdependency_libs $mynewdependency_lib" + # All subsequent reloadable object files will link in + # the last one created. + reload_objs="$objlist $last_robj" + eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\" fi + last_robj=$output_objdir/$output_la-${k}.$objext + func_arith $k + 1 + k=$func_arith_result + output=$output_objdir/$output_la-${k}.$objext + objlist=" $obj" + func_len " $last_robj" + func_arith $len0 + $func_len_result + len=$func_arith_result fi - ;; - esac - done - dependency_libs="$newdependency_libs" - newdlfiles= - for lib in $dlfiles; do - name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` - if test -z "$libdir"; then - $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 - exit $EXIT_FAILURE + done + # Handle the remaining objects by creating one last + # reloadable object file. All subsequent reloadable object + # files will link in the last one created. + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + reload_objs="$objlist $last_robj" + eval concat_cmds=\"\${concat_cmds}$reload_cmds\" + if test -n "$last_robj"; then + eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\" fi - newdlfiles="$newdlfiles $libdir/$name" - done - dlfiles="$newdlfiles" - newdlprefiles= - for lib in $dlprefiles; do - name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` - if test -z "$libdir"; then - $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 - exit $EXIT_FAILURE + func_append delfiles " $output" + + else + output= + fi + + if ${skipped_export-false}; then + func_verbose "generating symbol list for \`$libname.la'" + export_symbols="$output_objdir/$libname.exp" + $opt_dry_run || $RM $export_symbols + libobjs=$output + # Append the command to create the export file. + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\" + if test -n "$last_robj"; then + eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" fi - newdlprefiles="$newdlprefiles $libdir/$name" - done - dlprefiles="$newdlprefiles" - else - newdlfiles= - for lib in $dlfiles; do - case $lib in - [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; - *) abs=`pwd`"/$lib" ;; - esac - newdlfiles="$newdlfiles $abs" - done - dlfiles="$newdlfiles" - newdlprefiles= - for lib in $dlprefiles; do - case $lib in - [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; - *) abs=`pwd`"/$lib" ;; - esac - newdlprefiles="$newdlprefiles $abs" + fi + + test -n "$save_libobjs" && + func_verbose "creating a temporary reloadable object file: $output" + + # Loop through the commands generated above and execute them. + save_ifs="$IFS"; IFS='~' + for cmd in $concat_cmds; do + IFS="$save_ifs" + $opt_silent || { + func_quote_for_expand "$cmd" + eval "func_echo $func_quote_for_expand_result" + } + $opt_dry_run || eval "$cmd" || { + lt_exit=$? + + # Restore the uninstalled library and exit + if test "$opt_mode" = relink; then + ( cd "$output_objdir" && \ + $RM "${realname}T" && \ + $MV "${realname}U" "$realname" ) + fi + + exit $lt_exit + } done - dlprefiles="$newdlprefiles" + IFS="$save_ifs" + + if test -n "$export_symbols_regex" && ${skipped_export-false}; then + func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' + func_show_eval '$MV "${export_symbols}T" "$export_symbols"' + fi fi - $rm $output - # place dlname in correct position for cygwin - tdlname=$dlname - case $host,$output,$installed,$module,$dlname in - *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; - esac - # Do not add duplicates - if test "$installed" = yes && test "$D"; then - install_libdir=`echo "$install_libdir" |sed -e "s:$D:/:g" -e 's:/\+:/:g'` + + if ${skipped_export-false}; then + if test -n "$export_symbols" && test -n "$include_expsyms"; then + tmp_export_symbols="$export_symbols" + test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" + $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' + fi + + if test -n "$orig_export_symbols"; then + # The given exports_symbols file has to be filtered, so filter it. + func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" + # FIXME: $output_objdir/$libname.filter potentially contains lots of + # 's' commands which not all seds can handle. GNU sed should be fine + # though. Also, the filter scales superlinearly with the number of + # global variables. join(1) would be nice here, but unfortunately + # isn't a blessed tool. + $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter + func_append delfiles " $export_symbols $output_objdir/$libname.filter" + export_symbols=$output_objdir/$libname.def + $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols + fi fi - $echo > $output "\ -# $outputname - a libtool library file -# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP -# -# Please DO NOT delete this file! -# It is necessary for linking the library. -# The name that we can dlopen(3). -dlname='$tdlname' + libobjs=$output + # Restore the value of output. + output=$save_output -# Names of this library. -library_names='$library_names' + if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then + eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + test "X$libobjs" = "X " && libobjs= + fi + # Expand the library linking commands again to reset the + # value of $libobjs for piecewise linking. -# The name of the static archive. -old_library='$old_library' + # Do each of the archive commands. + if test "$module" = yes && test -n "$module_cmds" ; then + if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then + cmds=$module_expsym_cmds + else + cmds=$module_cmds + fi + else + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + cmds=$archive_expsym_cmds + else + cmds=$archive_cmds + fi + fi + fi -# Libraries that this one depends upon. -dependency_libs='$dependency_libs' + if test -n "$delfiles"; then + # Append the command to remove temporary files to $cmds. + eval cmds=\"\$cmds~\$RM $delfiles\" + fi -# Version information for $libname. -current=$current -age=$age -revision=$revision + # Add any objects from preloaded convenience libraries + if test -n "$dlprefiles"; then + gentop="$output_objdir/${outputname}x" + func_append generated " $gentop" + + func_extract_archives $gentop $dlprefiles + func_append libobjs " $func_extract_archives_result" + test "X$libobjs" = "X " && libobjs= + fi + + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $opt_silent || { + func_quote_for_expand "$cmd" + eval "func_echo $func_quote_for_expand_result" + } + $opt_dry_run || eval "$cmd" || { + lt_exit=$? + + # Restore the uninstalled library and exit + if test "$opt_mode" = relink; then + ( cd "$output_objdir" && \ + $RM "${realname}T" && \ + $MV "${realname}U" "$realname" ) + fi + + exit $lt_exit + } + done + IFS="$save_ifs" -# Is this an already installed library? -installed=$installed + # Restore the uninstalled library and exit + if test "$opt_mode" = relink; then + $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? -# Should we warn about portability when linking against -modules? -shouldnotlink=$module + if test -n "$convenience"; then + if test -z "$whole_archive_flag_spec"; then + func_show_eval '${RM}r "$gentop"' + fi + fi -# Files to dlopen/dlpreopen -dlopen='$dlfiles' -dlpreopen='$dlprefiles' + exit $EXIT_SUCCESS + fi -# Directory that this library needs to be installed in: -libdir='$install_libdir'" - if test "$installed" = no && test "$need_relink" = yes; then - $echo >> $output "\ -relink_command=\"$relink_command\"" + # Create links to the real library. + for linkname in $linknames; do + if test "$realname" != "$linkname"; then + func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?' fi done - fi - # Do a symbolic link so that the libtool archive can be found in - # LD_LIBRARY_PATH before the program is installed. - $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" - $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $? + # If -module or -export-dynamic was specified, set the dlname. + if test "$module" = yes || test "$export_dynamic" = yes; then + # On all known operating systems, these are identical. + dlname="$soname" + fi + fi ;; - esac - exit $EXIT_SUCCESS - ;; - # libtool install mode - install) - modename="$modename: install" + obj) + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + func_warning "\`-dlopen' is ignored for objects" + fi - # There may be an optional sh(1) argument at the beginning of - # install_prog (especially on Windows NT). - if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || - # Allow the use of GNU shtool's install command. - $echo "X$nonopt" | grep shtool > /dev/null; then - # Aesthetically quote it. - arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"` - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; + case " $deplibs" in + *\ -l* | *\ -L*) + func_warning "\`-l' and \`-L' are ignored for objects" ;; esac - install_prog="$arg " - arg="$1" - shift - else - install_prog= - arg=$nonopt - fi - # The real first argument should be the name of the installation program. - # Aesthetically quote it. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - install_prog="$install_prog$arg" + test -n "$rpath" && \ + func_warning "\`-rpath' is ignored for objects" - # We need to accept at least all the BSD install flags. - dest= - files= - opts= - prev= - install_type= - isdir=no - stripme= - for arg - do - if test -n "$dest"; then - files="$files $dest" - dest=$arg - continue - fi + test -n "$xrpath" && \ + func_warning "\`-R' is ignored for objects" - case $arg in - -d) isdir=yes ;; - -f) - case " $install_prog " in - *[\\\ /]cp\ *) ;; - *) prev=$arg ;; - esac - ;; - -g | -m | -o) prev=$arg ;; - -s) - stripme=" -s" - continue - ;; - -*) + test -n "$vinfo" && \ + func_warning "\`-version-info' is ignored for objects" + + test -n "$release" && \ + func_warning "\`-release' is ignored for objects" + + case $output in + *.lo) + test -n "$objs$old_deplibs" && \ + func_fatal_error "cannot build library object \`$output' from non-libtool objects" + + libobj=$output + func_lo2o "$libobj" + obj=$func_lo2o_result ;; *) - # If the previous option needed an argument, then skip it. - if test -n "$prev"; then - prev= - else - dest=$arg - continue - fi + libobj= + obj="$output" ;; esac - # Aesthetically quote the argument. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - install_prog="$install_prog $arg" - done + # Delete the old objects. + $opt_dry_run || $RM $obj $libobj - if test -z "$install_prog"; then - $echo "$modename: you must specify an install program" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi + # Objects from convenience libraries. This assumes + # single-version convenience libraries. Whenever we create + # different ones for PIC/non-PIC, this we'll have to duplicate + # the extraction. + reload_conv_objs= + gentop= + # reload_cmds runs $LD directly, so let us get rid of + # -Wl from whole_archive_flag_spec and hope we can get by with + # turning comma into space.. + wl= - if test -n "$prev"; then - $echo "$modename: the \`$prev' option requires an argument" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi + if test -n "$convenience"; then + if test -n "$whole_archive_flag_spec"; then + eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" + reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'` + else + gentop="$output_objdir/${obj}x" + func_append generated " $gentop" - if test -z "$files"; then - if test -z "$dest"; then - $echo "$modename: no file or destination specified" 1>&2 - else - $echo "$modename: you must specify a destination" 1>&2 + func_extract_archives $gentop $convenience + reload_conv_objs="$reload_objs $func_extract_archives_result" + fi fi - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi - # Strip any trailing slash from the destination. - dest=`$echo "X$dest" | $Xsed -e 's%/$%%'` + # If we're not building shared, we need to use non_pic_objs + test "$build_libtool_libs" != yes && libobjs="$non_pic_objects" - # Check to see that the destination is a directory. - test -d "$dest" && isdir=yes - if test "$isdir" = yes; then - destdir="$dest" - destname= - else - destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'` - test "X$destdir" = "X$dest" && destdir=. - destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'` + # Create the old-style object. + reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test - # Not a directory, so check to see that there is only one file specified. - set dummy $files - if test "$#" -gt 2; then - $echo "$modename: \`$dest' is not a directory" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE + output="$obj" + func_execute_cmds "$reload_cmds" 'exit $?' + + # Exit if we aren't doing a library object file. + if test -z "$libobj"; then + if test -n "$gentop"; then + func_show_eval '${RM}r "$gentop"' + fi + + exit $EXIT_SUCCESS fi - fi - case $destdir in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - for file in $files; do - case $file in - *.lo) ;; - *) - $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - ;; - esac - done + + if test "$build_libtool_libs" != yes; then + if test -n "$gentop"; then + func_show_eval '${RM}r "$gentop"' + fi + + # Create an invalid libtool object if no PIC, so that we don't + # accidentally link it into a program. + # $show "echo timestamp > $libobj" + # $opt_dry_run || eval "echo timestamp > $libobj" || exit $? + exit $EXIT_SUCCESS + fi + + if test -n "$pic_flag" || test "$pic_mode" != default; then + # Only do commands if we really have different PIC objects. + reload_objs="$libobjs $reload_conv_objs" + output="$libobj" + func_execute_cmds "$reload_cmds" 'exit $?' + fi + + if test -n "$gentop"; then + func_show_eval '${RM}r "$gentop"' + fi + + exit $EXIT_SUCCESS ;; - esac - # This variable tells wrapper scripts just to set variables rather - # than running their programs. - libtool_install_magic="$magic" + prog) + case $host in + *cygwin*) func_stripname '' '.exe' "$output" + output=$func_stripname_result.exe;; + esac + test -n "$vinfo" && \ + func_warning "\`-version-info' is ignored for programs" - staticlibs= - future_libdirs= - current_libdirs= - for file in $files; do + test -n "$release" && \ + func_warning "\`-release' is ignored for programs" - # Do each installation. - case $file in - *.$libext) - # Do the static libraries later. - staticlibs="$staticlibs $file" + test "$preload" = yes \ + && test "$dlopen_support" = unknown \ + && test "$dlopen_self" = unknown \ + && test "$dlopen_self_static" = unknown && \ + func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support." + + case $host in + *-*-rhapsody* | *-*-darwin1.[012]) + # On Rhapsody replace the C library is the System framework + compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'` + finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'` ;; + esac - *.la) - # Check to see that this really is a libtool archive. - if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : - else - $echo "$modename: \`$file' is not a valid libtool archive" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE + case $host in + *-*-darwin*) + # Don't allow lazy linking, it breaks C++ global constructors + # But is supposedly fixed on 10.4 or later (yay!). + if test "$tagname" = CXX ; then + case ${MACOSX_DEPLOYMENT_TARGET-10.0} in + 10.[0123]) + func_append compile_command " ${wl}-bind_at_load" + func_append finalize_command " ${wl}-bind_at_load" + ;; + esac fi + # Time to change all our "foo.ltframework" stuff back to "-framework foo" + compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + ;; + esac - library_names= - old_library= - relink_command= - # If there is no directory component, then add one. - case $file in - */* | *\\*) . $file ;; - *) . ./$file ;; + + # move library search paths that coincide with paths to not yet + # installed libraries to the beginning of the library search list + new_libs= + for path in $notinst_path; do + case " $new_libs " in + *" -L$path/$objdir "*) ;; + *) + case " $compile_deplibs " in + *" -L$path/$objdir "*) + func_append new_libs " -L$path/$objdir" ;; + esac + ;; + esac + done + for deplib in $compile_deplibs; do + case $deplib in + -L*) + case " $new_libs " in + *" $deplib "*) ;; + *) func_append new_libs " $deplib" ;; + esac + ;; + *) func_append new_libs " $deplib" ;; esac + done + compile_deplibs="$new_libs" - # Add the libdir to current_libdirs if it is the destination. - if test "X$destdir" = "X$libdir"; then - case "$current_libdirs " in + + func_append compile_command " $compile_deplibs" + func_append finalize_command " $finalize_deplibs" + + if test -n "$rpath$xrpath"; then + # If the user specified any rpath flags, then add them. + for libdir in $rpath $xrpath; do + # This is the magic to use -rpath. + case "$finalize_rpath " in *" $libdir "*) ;; - *) current_libdirs="$current_libdirs $libdir" ;; + *) func_append finalize_rpath " $libdir" ;; esac - else - # Note the libdir as a future libdir. - case "$future_libdirs " in + done + fi + + # Now hardcode the library paths + rpath= + hardcode_libdirs= + for libdir in $compile_rpath $finalize_rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + func_append rpath " $flag" + fi + elif test -n "$runpath_var"; then + case "$perm_rpath " in *" $libdir "*) ;; - *) future_libdirs="$future_libdirs $libdir" ;; + *) func_append perm_rpath " $libdir" ;; esac fi + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) + testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'` + case :$dllsearchpath: in + *":$libdir:"*) ;; + ::) dllsearchpath=$libdir;; + *) func_append dllsearchpath ":$libdir";; + esac + case :$dllsearchpath: in + *":$testbindir:"*) ;; + ::) dllsearchpath=$testbindir;; + *) func_append dllsearchpath ":$testbindir";; + esac + ;; + esac + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + eval rpath=\" $hardcode_libdir_flag_spec\" + fi + compile_rpath="$rpath" - dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/ - test "X$dir" = "X$file/" && dir= - dir="$dir$objdir" - - if test -n "$relink_command"; then - # Determine the prefix the user has applied to our future dir. - inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"` - - # Don't allow the user to place us outside of our expected - # location b/c this prevents finding dependent libraries that - # are installed to the same prefix. - # At present, this check doesn't affect windows .dll's that - # are installed into $libdir/../bin (currently, that works fine) - # but it's something to keep an eye on. - if test "$inst_prefix_dir" = "$destdir"; then - $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2 - exit $EXIT_FAILURE - fi - - if test -n "$inst_prefix_dir"; then - # Stick the inst_prefix_dir data into the link command. - relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` - else - relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%%"` - fi - - $echo "$modename: warning: relinking \`$file'" 1>&2 - $show "$relink_command" - if $run eval "$relink_command"; then : + rpath= + hardcode_libdirs= + for libdir in $finalize_rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" + ;; + esac + fi else - $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 - exit $EXIT_FAILURE + eval flag=\"$hardcode_libdir_flag_spec\" + func_append rpath " $flag" fi + elif test -n "$runpath_var"; then + case "$finalize_perm_rpath " in + *" $libdir "*) ;; + *) func_append finalize_perm_rpath " $libdir" ;; + esac fi + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + eval rpath=\" $hardcode_libdir_flag_spec\" + fi + finalize_rpath="$rpath" - # See the names of the shared library. - set dummy $library_names - if test -n "$2"; then - realname="$2" - shift - shift + if test -n "$libobjs" && test "$build_old_libs" = yes; then + # Transform all the library objects into standard objects. + compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP` + finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP` + fi - srcname="$realname" - test -n "$relink_command" && srcname="$realname"T + func_generate_dlsyms "$outputname" "@PROGRAM@" "no" - # Install the shared library and build the symlinks. - $show "$install_prog $dir/$srcname $destdir/$realname" - $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $? - if test -n "$stripme" && test -n "$striplib"; then - $show "$striplib $destdir/$realname" - $run eval "$striplib $destdir/$realname" || exit $? - fi + # template prelinking step + if test -n "$prelink_cmds"; then + func_execute_cmds "$prelink_cmds" 'exit $?' + fi - if test "$#" -gt 0; then - # Delete the old symlinks, and create new ones. - # Try `ln -sf' first, because the `ln' binary might depend on - # the symlink we replace! Solaris /bin/ln does not understand -f, - # so we also need to try rm && ln -s. - for linkname - do - if test "$linkname" != "$realname"; then - $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })" - $run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })" - fi - done - fi + wrappers_required=yes + case $host in + *cegcc* | *mingw32ce*) + # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway. + wrappers_required=no + ;; + *cygwin* | *mingw* ) + if test "$build_libtool_libs" != yes; then + wrappers_required=no + fi + ;; + *) + if test "$need_relink" = no || test "$build_libtool_libs" != yes; then + wrappers_required=no + fi + ;; + esac + if test "$wrappers_required" = no; then + # Replace the output file specification. + compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'` + link_command="$compile_command$compile_rpath" - # Do each command in the postinstall commands. - lib="$destdir/$realname" - cmds=$postinstall_cmds - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - $show "$cmd" - $run eval "$cmd" || { - lt_exit=$? - - # Restore the uninstalled library and exit - if test "$mode" = relink; then - $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)' - fi + # We have no uninstalled library dependencies, so finalize right now. + exit_status=0 + func_show_eval "$link_command" 'exit_status=$?' - exit $lt_exit - } - done - IFS="$save_ifs" + if test -n "$postlink_cmds"; then + func_to_tool_file "$output" + postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` + func_execute_cmds "$postlink_cmds" 'exit $?' fi - # Install the pseudo-library for information purposes. - name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - instname="$dir/$name"i - $show "$install_prog $instname $destdir/$name" - $run eval "$install_prog $instname $destdir/$name" || exit $? + # Delete the generated files. + if test -f "$output_objdir/${outputname}S.${objext}"; then + func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"' + fi - # Maybe install the static library, too. - test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" - ;; + exit $exit_status + fi - *.lo) - # Install (i.e. copy) a libtool object. + if test -n "$compile_shlibpath$finalize_shlibpath"; then + compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" + fi + if test -n "$finalize_shlibpath"; then + finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" + fi - # Figure out destination file name, if it wasn't already specified. - if test -n "$destname"; then - destfile="$destdir/$destname" - else - destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - destfile="$destdir/$destfile" + compile_var= + finalize_var= + if test -n "$runpath_var"; then + if test -n "$perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $perm_rpath; do + func_append rpath "$dir:" + done + compile_var="$runpath_var=\"$rpath\$$runpath_var\" " fi - - # Deduce the name of the destination old-style object file. - case $destfile in - *.lo) - staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"` - ;; - *.$objext) - staticdest="$destfile" - destfile= - ;; - *) - $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - ;; - esac - - # Install the libtool object if requested. - if test -n "$destfile"; then - $show "$install_prog $file $destfile" - $run eval "$install_prog $file $destfile" || exit $? + if test -n "$finalize_perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $finalize_perm_rpath; do + func_append rpath "$dir:" + done + finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " fi + fi - # Install the old object if enabled. - if test "$build_old_libs" = yes; then - # Deduce the name of the old-style object file. - staticobj=`$echo "X$file" | $Xsed -e "$lo2o"` + if test "$no_install" = yes; then + # We don't need to create a wrapper script. + link_command="$compile_var$compile_command$compile_rpath" + # Replace the output file specification. + link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'` + # Delete the old output file. + $opt_dry_run || $RM $output + # Link the executable and exit + func_show_eval "$link_command" 'exit $?' - $show "$install_prog $staticobj $staticdest" - $run eval "$install_prog \$staticobj \$staticdest" || exit $? + if test -n "$postlink_cmds"; then + func_to_tool_file "$output" + postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` + func_execute_cmds "$postlink_cmds" 'exit $?' fi + exit $EXIT_SUCCESS - ;; + fi - *) - # Figure out destination file name, if it wasn't already specified. - if test -n "$destname"; then - destfile="$destdir/$destname" + if test "$hardcode_action" = relink; then + # Fast installation is not supported + link_command="$compile_var$compile_command$compile_rpath" + relink_command="$finalize_var$finalize_command$finalize_rpath" + + func_warning "this platform does not like uninstalled shared libraries" + func_warning "\`$output' will be relinked during installation" + else + if test "$fast_install" != no; then + link_command="$finalize_var$compile_command$finalize_rpath" + if test "$fast_install" = yes; then + relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'` + else + # fast_install is set to needless + relink_command= + fi else - destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - destfile="$destdir/$destfile" + link_command="$compile_var$compile_command$compile_rpath" + relink_command="$finalize_var$finalize_command$finalize_rpath" fi + fi - # If the file is missing, and there is a .exe on the end, strip it - # because it is most likely a libtool script we actually want to - # install - stripped_ext="" - case $file in - *.exe) - if test ! -f "$file"; then - file=`$echo $file|${SED} 's,.exe$,,'` - stripped_ext=".exe" - fi - ;; - esac + # Replace the output file specification. + link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` - # Do a test to see if this is really a libtool program. - case $host in - *cygwin*|*mingw*) - wrapper=`$echo $file | ${SED} -e 's,.exe$,,'` - ;; - *) - wrapper=$file - ;; - esac - if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then - notinst_deplibs= - relink_command= + # Delete the old output files. + $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname - # Note that it is not necessary on cygwin/mingw to append a dot to - # foo even if both foo and FILE.exe exist: automatic-append-.exe - # behavior happens only for exec(3), not for open(2)! Also, sourcing - # `FILE.' does not work on cygwin managed mounts. - # - # If there is no directory component, then add one. - case $wrapper in - */* | *\\*) . ${wrapper} ;; - *) . ./${wrapper} ;; - esac + func_show_eval "$link_command" 'exit $?' - # Check the variables that should have been set. - if test -z "$notinst_deplibs"; then - $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2 - exit $EXIT_FAILURE - fi + if test -n "$postlink_cmds"; then + func_to_tool_file "$output_objdir/$outputname" + postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` + func_execute_cmds "$postlink_cmds" 'exit $?' + fi - finalize=yes - for lib in $notinst_deplibs; do - # Check to see that each library is installed. - libdir= - if test -f "$lib"; then - # If there is no directory component, then add one. - case $lib in - */* | *\\*) . $lib ;; - *) . ./$lib ;; - esac - fi - libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test - if test -n "$libdir" && test ! -f "$libfile"; then - $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2 - finalize=no - fi - done + # Now create the wrapper script. + func_verbose "creating $output" - relink_command= - # Note that it is not necessary on cygwin/mingw to append a dot to - # foo even if both foo and FILE.exe exist: automatic-append-.exe - # behavior happens only for exec(3), not for open(2)! Also, sourcing - # `FILE.' does not work on cygwin managed mounts. - # - # If there is no directory component, then add one. - case $wrapper in - */* | *\\*) . ${wrapper} ;; - *) . ./${wrapper} ;; - esac + # Quote the relink command for shipping. + if test -n "$relink_command"; then + # Preserve any variables that may affect compiler behavior + for var in $variables_saved_for_relink; do + if eval test -z \"\${$var+set}\"; then + relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" + elif eval var_value=\$$var; test -z "$var_value"; then + relink_command="$var=; export $var; $relink_command" + else + func_quote_for_eval "$var_value" + relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" + fi + done + relink_command="(cd `pwd`; $relink_command)" + relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` + fi - outputname= - if test "$fast_install" = no && test -n "$relink_command"; then - if test "$finalize" = yes && test -z "$run"; then - tmpdir="/tmp" - test -n "$TMPDIR" && tmpdir="$TMPDIR" - tmpdir="$tmpdir/libtool-$$" - save_umask=`umask` - umask 0077 - if $mkdir "$tmpdir"; then - umask $save_umask - else - umask $save_umask - $echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2 - continue - fi - file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'` - outputname="$tmpdir/$file" - # Replace the output file specification. - relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` + # Only actually do things if not in dry run mode. + $opt_dry_run || { + # win32 will think the script is a binary if it has + # a .exe suffix, so we strip it off here. + case $output in + *.exe) func_stripname '' '.exe' "$output" + output=$func_stripname_result ;; + esac + # test for cygwin because mv fails w/o .exe extensions + case $host in + *cygwin*) + exeext=.exe + func_stripname '' '.exe' "$outputname" + outputname=$func_stripname_result ;; + *) exeext= ;; + esac + case $host in + *cygwin* | *mingw* ) + func_dirname_and_basename "$output" "" "." + output_name=$func_basename_result + output_path=$func_dirname_result + cwrappersource="$output_path/$objdir/lt-$output_name.c" + cwrapper="$output_path/$output_name.exe" + $RM $cwrappersource $cwrapper + trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 + + func_emit_cwrapperexe_src > $cwrappersource + + # The wrapper executable is built using the $host compiler, + # because it contains $host paths and files. If cross- + # compiling, it, like the target executable, must be + # executed on the $host or under an emulation environment. + $opt_dry_run || { + $LTCC $LTCFLAGS -o $cwrapper $cwrappersource + $STRIP $cwrapper + } - $show "$relink_command" - if $run eval "$relink_command"; then : + # Now, create the wrapper script for func_source use: + func_ltwrapper_scriptname $cwrapper + $RM $func_ltwrapper_scriptname_result + trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15 + $opt_dry_run || { + # note: this script will not be executed, so do not chmod. + if test "x$build" = "x$host" ; then + $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result else - $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 - ${rm}r "$tmpdir" - continue + func_emit_wrapper no > $func_ltwrapper_scriptname_result fi - file="$outputname" - else - $echo "$modename: warning: cannot relink \`$file'" 1>&2 - fi - else - # Install the binary that we compiled earlier. - file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` - fi - fi + } + ;; + * ) + $RM $output + trap "$RM $output; exit $EXIT_FAILURE" 1 2 15 - # remove .exe since cygwin /usr/bin/install will append another - # one anyway - case $install_prog,$host in - */usr/bin/install*,*cygwin*) - case $file:$destfile in - *.exe:*.exe) - # this is ok - ;; - *.exe:*) - destfile=$destfile.exe - ;; - *:*.exe) - destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'` - ;; - esac + func_emit_wrapper no > $output + chmod +x $output ;; esac - $show "$install_prog$stripme $file $destfile" - $run eval "$install_prog\$stripme \$file \$destfile" || exit $? - test -n "$outputname" && ${rm}r "$tmpdir" - ;; - esac - done - - for file in $staticlibs; do - name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - - # Set up the ranlib parameters. - oldlib="$destdir/$name" + } + exit $EXIT_SUCCESS + ;; + esac - $show "$install_prog $file $oldlib" - $run eval "$install_prog \$file \$oldlib" || exit $? + # See if we need to build an old-fashioned archive. + for oldlib in $oldlibs; do - if test -n "$stripme" && test -n "$old_striplib"; then - $show "$old_striplib $oldlib" - $run eval "$old_striplib $oldlib" || exit $? + if test "$build_libtool_libs" = convenience; then + oldobjs="$libobjs_save $symfileobj" + addlibs="$convenience" + build_libtool_libs=no + else + if test "$build_libtool_libs" = module; then + oldobjs="$libobjs_save" + build_libtool_libs=no + else + oldobjs="$old_deplibs $non_pic_objects" + if test "$preload" = yes && test -f "$symfileobj"; then + func_append oldobjs " $symfileobj" + fi + fi + addlibs="$old_convenience" fi - # Do each command in the postinstall commands. - cmds=$old_postinstall_cmds - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - done + if test -n "$addlibs"; then + gentop="$output_objdir/${outputname}x" + func_append generated " $gentop" - if test -n "$future_libdirs"; then - $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2 - fi + func_extract_archives $gentop $addlibs + func_append oldobjs " $func_extract_archives_result" + fi - if test -n "$current_libdirs"; then - # Maybe just do a dry run. - test -n "$run" && current_libdirs=" -n$current_libdirs" - exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' - else - exit $EXIT_SUCCESS - fi - ;; + # Do each command in the archive commands. + if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then + cmds=$old_archive_from_new_cmds + else - # libtool finish mode - finish) - modename="$modename: finish" - libdirs="$nonopt" - admincmds= + # Add any objects from preloaded convenience libraries + if test -n "$dlprefiles"; then + gentop="$output_objdir/${outputname}x" + func_append generated " $gentop" - if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then - for dir - do - libdirs="$libdirs $dir" - done + func_extract_archives $gentop $dlprefiles + func_append oldobjs " $func_extract_archives_result" + fi - for libdir in $libdirs; do - if test -n "$finish_cmds"; then - # Do each command in the finish commands. - cmds=$finish_cmds - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - $show "$cmd" - $run eval "$cmd" || admincmds="$admincmds - $cmd" + # POSIX demands no paths to be encoded in archives. We have + # to avoid creating archives with duplicate basenames if we + # might have to extract them afterwards, e.g., when creating a + # static archive out of a convenience library, or when linking + # the entirety of a libtool archive into another (currently + # not supported by libtool). + if (for obj in $oldobjs + do + func_basename "$obj" + $ECHO "$func_basename_result" + done | sort | sort -uc >/dev/null 2>&1); then + : + else + echo "copying selected object files to avoid basename conflicts..." + gentop="$output_objdir/${outputname}x" + func_append generated " $gentop" + func_mkdir_p "$gentop" + save_oldobjs=$oldobjs + oldobjs= + counter=1 + for obj in $save_oldobjs + do + func_basename "$obj" + objbase="$func_basename_result" + case " $oldobjs " in + " ") oldobjs=$obj ;; + *[\ /]"$objbase "*) + while :; do + # Make sure we don't pick an alternate name that also + # overlaps. + newobj=lt$counter-$objbase + func_arith $counter + 1 + counter=$func_arith_result + case " $oldobjs " in + *[\ /]"$newobj "*) ;; + *) if test ! -f "$gentop/$newobj"; then break; fi ;; + esac + done + func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" + func_append oldobjs " $gentop/$newobj" + ;; + *) func_append oldobjs " $obj" ;; + esac done - IFS="$save_ifs" - fi - if test -n "$finish_eval"; then - # Do the single finish_eval. - eval cmds=\"$finish_eval\" - $run eval "$cmds" || admincmds="$admincmds - $cmds" fi - done - fi - - # Exit here if they wanted silent mode. - test "$show" = : && exit $EXIT_SUCCESS + func_to_tool_file "$oldlib" func_convert_file_msys_to_w32 + tool_oldlib=$func_to_tool_file_result + eval cmds=\"$old_archive_cmds\" - $echo "----------------------------------------------------------------------" - $echo "Libraries have been installed in:" - for libdir in $libdirs; do - $echo " $libdir" + func_len " $cmds" + len=$func_len_result + if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then + cmds=$old_archive_cmds + elif test -n "$archiver_list_spec"; then + func_verbose "using command file archive linking..." + for obj in $oldobjs + do + func_to_tool_file "$obj" + $ECHO "$func_to_tool_file_result" + done > $output_objdir/$libname.libcmd + func_to_tool_file "$output_objdir/$libname.libcmd" + oldobjs=" $archiver_list_spec$func_to_tool_file_result" + cmds=$old_archive_cmds + else + # the command line is too long to link in one step, link in parts + func_verbose "using piecewise archive linking..." + save_RANLIB=$RANLIB + RANLIB=: + objlist= + concat_cmds= + save_oldobjs=$oldobjs + oldobjs= + # Is there a better way of finding the last object in the list? + for obj in $save_oldobjs + do + last_oldobj=$obj + done + eval test_cmds=\"$old_archive_cmds\" + func_len " $test_cmds" + len0=$func_len_result + len=$len0 + for obj in $save_oldobjs + do + func_len " $obj" + func_arith $len + $func_len_result + len=$func_arith_result + func_append objlist " $obj" + if test "$len" -lt "$max_cmd_len"; then + : + else + # the above command should be used before it gets too long + oldobjs=$objlist + if test "$obj" = "$last_oldobj" ; then + RANLIB=$save_RANLIB + fi + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" + objlist= + len=$len0 + fi + done + RANLIB=$save_RANLIB + oldobjs=$objlist + if test "X$oldobjs" = "X" ; then + eval cmds=\"\$concat_cmds\" + else + eval cmds=\"\$concat_cmds~\$old_archive_cmds\" + fi + fi + fi + func_execute_cmds "$cmds" 'exit $?' done - $echo - $echo "If you ever happen to want to link against installed libraries" - $echo "in a given directory, LIBDIR, you must either use libtool, and" - $echo "specify the full pathname of the library, or use the \`-LLIBDIR'" - $echo "flag during linking and do at least one of the following:" - if test -n "$shlibpath_var"; then - $echo " - add LIBDIR to the \`$shlibpath_var' environment variable" - $echo " during execution" - fi - if test -n "$runpath_var"; then - $echo " - add LIBDIR to the \`$runpath_var' environment variable" - $echo " during linking" - fi - if test -n "$hardcode_libdir_flag_spec"; then - libdir=LIBDIR - eval flag=\"$hardcode_libdir_flag_spec\" - - $echo " - use the \`$flag' linker flag" - fi - if test -n "$admincmds"; then - $echo " - have your system administrator run these commands:$admincmds" - fi - if test -f /etc/ld.so.conf; then - $echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" - fi - $echo - $echo "See any operating system documentation about shared libraries for" - $echo "more information, such as the ld(1) and ld.so(8) manual pages." - $echo "----------------------------------------------------------------------" - exit $EXIT_SUCCESS - ;; - - # libtool execute mode - execute) - modename="$modename: execute" - # The first argument is the command name. - cmd="$nonopt" - if test -z "$cmd"; then - $echo "$modename: you must specify a COMMAND" 1>&2 - $echo "$help" - exit $EXIT_FAILURE - fi + test -n "$generated" && \ + func_show_eval "${RM}r$generated" - # Handle -dlopen flags immediately. - for file in $execute_dlfiles; do - if test ! -f "$file"; then - $echo "$modename: \`$file' is not a file" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi + # Now create the libtool archive. + case $output in + *.la) + old_library= + test "$build_old_libs" = yes && old_library="$libname.$libext" + func_verbose "creating $output" - dir= - case $file in - *.la) - # Check to see that this really is a libtool archive. - if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + # Preserve any variables that may affect compiler behavior + for var in $variables_saved_for_relink; do + if eval test -z \"\${$var+set}\"; then + relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" + elif eval var_value=\$$var; test -z "$var_value"; then + relink_command="$var=; export $var; $relink_command" else - $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE + func_quote_for_eval "$var_value" + relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" fi + done + # Quote the link command for shipping. + relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" + relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` + if test "$hardcode_automatic" = yes ; then + relink_command= + fi - # Read the libtool library. - dlname= - library_names= + # Only create the output if not a dry run. + $opt_dry_run || { + for installed in no yes; do + if test "$installed" = yes; then + if test -z "$install_libdir"; then + break + fi + output="$output_objdir/$outputname"i + # Replace all uninstalled libtool libraries with the installed ones + newdependency_libs= + for deplib in $dependency_libs; do + case $deplib in + *.la) + func_basename "$deplib" + name="$func_basename_result" + func_resolve_sysroot "$deplib" + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result` + test -z "$libdir" && \ + func_fatal_error "\`$deplib' is not a valid libtool archive" + func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name" + ;; + -L*) + func_stripname -L '' "$deplib" + func_replace_sysroot "$func_stripname_result" + func_append newdependency_libs " -L$func_replace_sysroot_result" + ;; + -R*) + func_stripname -R '' "$deplib" + func_replace_sysroot "$func_stripname_result" + func_append newdependency_libs " -R$func_replace_sysroot_result" + ;; + *) func_append newdependency_libs " $deplib" ;; + esac + done + dependency_libs="$newdependency_libs" + newdlfiles= + + for lib in $dlfiles; do + case $lib in + *.la) + func_basename "$lib" + name="$func_basename_result" + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + test -z "$libdir" && \ + func_fatal_error "\`$lib' is not a valid libtool archive" + func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name" + ;; + *) func_append newdlfiles " $lib" ;; + esac + done + dlfiles="$newdlfiles" + newdlprefiles= + for lib in $dlprefiles; do + case $lib in + *.la) + # Only pass preopened files to the pseudo-archive (for + # eventual linking with the app. that links it) if we + # didn't already link the preopened objects directly into + # the library: + func_basename "$lib" + name="$func_basename_result" + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + test -z "$libdir" && \ + func_fatal_error "\`$lib' is not a valid libtool archive" + func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name" + ;; + esac + done + dlprefiles="$newdlprefiles" + else + newdlfiles= + for lib in $dlfiles; do + case $lib in + [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; + *) abs=`pwd`"/$lib" ;; + esac + func_append newdlfiles " $abs" + done + dlfiles="$newdlfiles" + newdlprefiles= + for lib in $dlprefiles; do + case $lib in + [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; + *) abs=`pwd`"/$lib" ;; + esac + func_append newdlprefiles " $abs" + done + dlprefiles="$newdlprefiles" + fi + $RM $output + # place dlname in correct position for cygwin + # In fact, it would be nice if we could use this code for all target + # systems that can't hard-code library paths into their executables + # and that have no shared library path variable independent of PATH, + # but it turns out we can't easily determine that from inspecting + # libtool variables, so we have to hard-code the OSs to which it + # applies here; at the moment, that means platforms that use the PE + # object format with DLL files. See the long comment at the top of + # tests/bindir.at for full details. + tdlname=$dlname + case $host,$output,$installed,$module,$dlname in + *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) + # If a -bindir argument was supplied, place the dll there. + if test "x$bindir" != x ; + then + func_relative_path "$install_libdir" "$bindir" + tdlname=$func_relative_path_result$dlname + else + # Otherwise fall back on heuristic. + tdlname=../bin/$dlname + fi + ;; + esac + $ECHO > $output "\ +# $outputname - a libtool library file +# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION +# +# Please DO NOT delete this file! +# It is necessary for linking the library. - # If there is no directory component, then add one. - case $file in - */* | *\\*) . $file ;; - *) . ./$file ;; - esac +# The name that we can dlopen(3). +dlname='$tdlname' - # Skip this library if it cannot be dlopened. - if test -z "$dlname"; then - # Warn if it was a shared library. - test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'" - continue - fi +# Names of this library. +library_names='$library_names' - dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` - test "X$dir" = "X$file" && dir=. +# The name of the static archive. +old_library='$old_library' - if test -f "$dir/$objdir/$dlname"; then - dir="$dir/$objdir" - else - $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2 - exit $EXIT_FAILURE - fi - ;; +# Linker flags that can not go in dependency_libs. +inherited_linker_flags='$new_inherited_linker_flags' - *.lo) - # Just add the directory containing the .lo file. - dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` - test "X$dir" = "X$file" && dir=. - ;; +# Libraries that this one depends upon. +dependency_libs='$dependency_libs' - *) - $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2 - continue - ;; - esac +# Names of additional weak libraries provided by this library +weak_library_names='$weak_libs' - # Get the absolute pathname. - absdir=`cd "$dir" && pwd` - test -n "$absdir" && dir="$absdir" +# Version information for $libname. +current=$current +age=$age +revision=$revision - # Now add the directory to shlibpath_var. - if eval "test -z \"\$$shlibpath_var\""; then - eval "$shlibpath_var=\"\$dir\"" - else - eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" - fi - done +# Is this an already installed library? +installed=$installed - # This variable tells wrapper scripts just to set shlibpath_var - # rather than running their programs. - libtool_execute_magic="$magic" +# Should we warn about portability when linking against -modules? +shouldnotlink=$module - # Check if any of the arguments is a wrapper script. - args= - for file - do - case $file in - -*) ;; - *) - # Do a test to see if this is really a libtool program. - if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - # If there is no directory component, then add one. - case $file in - */* | *\\*) . $file ;; - *) . ./$file ;; - esac +# Files to dlopen/dlpreopen +dlopen='$dlfiles' +dlpreopen='$dlprefiles' - # Transform arg to wrapped name. - file="$progdir/$program" - fi - ;; - esac - # Quote arguments (to preserve shell metacharacters). - file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"` - args="$args \"$file\"" - done +# Directory that this library needs to be installed in: +libdir='$install_libdir'" + if test "$installed" = no && test "$need_relink" = yes; then + $ECHO >> $output "\ +relink_command=\"$relink_command\"" + fi + done + } - if test -z "$run"; then - if test -n "$shlibpath_var"; then - # Export the shlibpath_var. - eval "export $shlibpath_var" - fi + # Do a symbolic link so that the libtool archive can be found in + # LD_LIBRARY_PATH before the program is installed. + func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?' + ;; + esac + exit $EXIT_SUCCESS +} - # Restore saved environment variables - if test "${save_LC_ALL+set}" = set; then - LC_ALL="$save_LC_ALL"; export LC_ALL - fi - if test "${save_LANG+set}" = set; then - LANG="$save_LANG"; export LANG - fi +{ test "$opt_mode" = link || test "$opt_mode" = relink; } && + func_mode_link ${1+"$@"} - # Now prepare to actually exec the command. - exec_cmd="\$cmd$args" - else - # Display what would be done. - if test -n "$shlibpath_var"; then - eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\"" - $echo "export $shlibpath_var" - fi - $echo "$cmd$args" - exit $EXIT_SUCCESS - fi - ;; - # libtool clean and uninstall mode - clean | uninstall) - modename="$modename: $mode" - rm="$nonopt" +# func_mode_uninstall arg... +func_mode_uninstall () +{ + $opt_debug + RM="$nonopt" files= rmforce= exit_status=0 @@ -6236,44 +9460,41 @@ relink_command=\"$relink_command\"" for arg do case $arg in - -f) rm="$rm $arg"; rmforce=yes ;; - -*) rm="$rm $arg" ;; - *) files="$files $arg" ;; + -f) func_append RM " $arg"; rmforce=yes ;; + -*) func_append RM " $arg" ;; + *) func_append files " $arg" ;; esac done - if test -z "$rm"; then - $echo "$modename: you must specify an RM program" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi + test -z "$RM" && \ + func_fatal_help "you must specify an RM program" rmdirs= - origobjdir="$objdir" for file in $files; do - dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` - if test "X$dir" = "X$file"; then - dir=. - objdir="$origobjdir" + func_dirname "$file" "" "." + dir="$func_dirname_result" + if test "X$dir" = X.; then + odir="$objdir" else - objdir="$dir/$origobjdir" + odir="$dir/$objdir" fi - name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - test "$mode" = uninstall && objdir="$dir" + func_basename "$file" + name="$func_basename_result" + test "$opt_mode" = uninstall && odir="$dir" - # Remember objdir for removal later, being careful to avoid duplicates - if test "$mode" = clean; then + # Remember odir for removal later, being careful to avoid duplicates + if test "$opt_mode" = clean; then case " $rmdirs " in - *" $objdir "*) ;; - *) rmdirs="$rmdirs $objdir" ;; + *" $odir "*) ;; + *) func_append rmdirs " $odir" ;; esac fi # Don't error if the file doesn't exist and rm -f was used. - if (test -L "$file") >/dev/null 2>&1 \ - || (test -h "$file") >/dev/null 2>&1 \ - || test -f "$file"; then + if { test -L "$file"; } >/dev/null 2>&1 || + { test -h "$file"; } >/dev/null 2>&1 || + test -f "$file"; then : elif test -d "$file"; then exit_status=1 @@ -6287,335 +9508,130 @@ relink_command=\"$relink_command\"" case $name in *.la) # Possibly a libtool archive, so verify it. - if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - . $dir/$name + if func_lalib_p "$file"; then + func_source $dir/$name # Delete the libtool libraries and symlinks. for n in $library_names; do - rmfiles="$rmfiles $objdir/$n" + func_append rmfiles " $odir/$n" done - test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library" - test "$mode" = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" + test -n "$old_library" && func_append rmfiles " $odir/$old_library" - if test "$mode" = uninstall; then + case "$opt_mode" in + clean) + case " $library_names " in + *" $dlname "*) ;; + *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;; + esac + test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i" + ;; + uninstall) if test -n "$library_names"; then # Do each command in the postuninstall commands. - cmds=$postuninstall_cmds - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - $show "$cmd" - $run eval "$cmd" - if test "$?" -ne 0 && test "$rmforce" != yes; then - exit_status=1 - fi - done - IFS="$save_ifs" + func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' fi if test -n "$old_library"; then # Do each command in the old_postuninstall commands. - cmds=$old_postuninstall_cmds - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - $show "$cmd" - $run eval "$cmd" - if test "$?" -ne 0 && test "$rmforce" != yes; then - exit_status=1 - fi - done - IFS="$save_ifs" + func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' fi # FIXME: should reinstall the best remaining shared library. - fi + ;; + esac fi ;; *.lo) # Possibly a libtool object, so verify it. - if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + if func_lalib_p "$file"; then # Read the .lo file - . $dir/$name + func_source $dir/$name # Add PIC object to the list of files to remove. - if test -n "$pic_object" \ - && test "$pic_object" != none; then - rmfiles="$rmfiles $dir/$pic_object" + if test -n "$pic_object" && + test "$pic_object" != none; then + func_append rmfiles " $dir/$pic_object" fi # Add non-PIC object to the list of files to remove. - if test -n "$non_pic_object" \ - && test "$non_pic_object" != none; then - rmfiles="$rmfiles $dir/$non_pic_object" + if test -n "$non_pic_object" && + test "$non_pic_object" != none; then + func_append rmfiles " $dir/$non_pic_object" fi fi ;; *) - if test "$mode" = clean ; then + if test "$opt_mode" = clean ; then noexename=$name case $file in *.exe) - file=`$echo $file|${SED} 's,.exe$,,'` - noexename=`$echo $name|${SED} 's,.exe$,,'` + func_stripname '' '.exe' "$file" + file=$func_stripname_result + func_stripname '' '.exe' "$name" + noexename=$func_stripname_result # $file with .exe has already been added to rmfiles, # add $file without .exe - rmfiles="$rmfiles $file" + func_append rmfiles " $file" ;; esac # Do a test to see if this is a libtool program. - if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - relink_command= - . $dir/$noexename + if func_ltwrapper_p "$file"; then + if func_ltwrapper_executable_p "$file"; then + func_ltwrapper_scriptname "$file" + relink_command= + func_source $func_ltwrapper_scriptname_result + func_append rmfiles " $func_ltwrapper_scriptname_result" + else + relink_command= + func_source $dir/$noexename + fi # note $name still contains .exe if it was in $file originally # as does the version of $file that was added into $rmfiles - rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}" + func_append rmfiles " $odir/$name $odir/${name}S.${objext}" if test "$fast_install" = yes && test -n "$relink_command"; then - rmfiles="$rmfiles $objdir/lt-$name" + func_append rmfiles " $odir/lt-$name" fi if test "X$noexename" != "X$name" ; then - rmfiles="$rmfiles $objdir/lt-${noexename}.c" + func_append rmfiles " $odir/lt-${noexename}.c" fi fi fi ;; esac - $show "$rm $rmfiles" - $run $rm $rmfiles || exit_status=1 + func_show_eval "$RM $rmfiles" 'exit_status=1' done - objdir="$origobjdir" # Try to remove the ${objdir}s in the directories where we deleted files for dir in $rmdirs; do if test -d "$dir"; then - $show "rmdir $dir" - $run rmdir $dir >/dev/null 2>&1 + func_show_eval "rmdir $dir >/dev/null 2>&1" fi done exit $exit_status - ;; +} - "") - $echo "$modename: you must specify a MODE" 1>&2 - $echo "$generic_help" 1>&2 - exit $EXIT_FAILURE - ;; - esac +{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } && + func_mode_uninstall ${1+"$@"} - if test -z "$exec_cmd"; then - $echo "$modename: invalid operation mode \`$mode'" 1>&2 - $echo "$generic_help" 1>&2 - exit $EXIT_FAILURE - fi -fi # test -z "$show_help" +test -z "$opt_mode" && { + help="$generic_help" + func_fatal_help "you must specify a MODE" +} + +test -z "$exec_cmd" && \ + func_fatal_help "invalid operation mode \`$opt_mode'" if test -n "$exec_cmd"; then - eval exec $exec_cmd + eval exec "$exec_cmd" exit $EXIT_FAILURE fi -# We need to display help for each of the modes. -case $mode in -"") $echo \ -"Usage: $modename [OPTION]... [MODE-ARG]... - -Provide generalized library-building support services. - - --config show all configuration variables - --debug enable verbose shell tracing --n, --dry-run display commands without modifying any files - --features display basic configuration information and exit - --finish same as \`--mode=finish' - --help display this help message and exit - --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS] - --quiet same as \`--silent' - --silent don't print informational messages - --tag=TAG use configuration variables from tag TAG - --version print version information - -MODE must be one of the following: - - clean remove files from the build directory - compile compile a source file into a libtool object - execute automatically set library path, then run a program - finish complete the installation of libtool libraries - install install libraries or executables - link create a library or an executable - uninstall remove libraries from an installed directory - -MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for -a more detailed description of MODE. - -Report bugs to ." - exit $EXIT_SUCCESS - ;; - -clean) - $echo \ -"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE... - -Remove files from the build directory. - -RM is the name of the program to use to delete files associated with each FILE -(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed -to RM. - -If FILE is a libtool library, object or program, all the files associated -with it are deleted. Otherwise, only FILE itself is deleted using RM." - ;; - -compile) - $echo \ -"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE - -Compile a source file into a libtool library object. - -This mode accepts the following additional options: - - -o OUTPUT-FILE set the output file name to OUTPUT-FILE - -prefer-pic try to building PIC objects only - -prefer-non-pic try to building non-PIC objects only - -static always build a \`.o' file suitable for static linking - -COMPILE-COMMAND is a command to be used in creating a \`standard' object file -from the given SOURCEFILE. - -The output file name is determined by removing the directory component from -SOURCEFILE, then substituting the C source code suffix \`.c' with the -library object suffix, \`.lo'." - ;; - -execute) - $echo \ -"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]... - -Automatically set library path, then run a program. - -This mode accepts the following additional options: - - -dlopen FILE add the directory containing FILE to the library path - -This mode sets the library path environment variable according to \`-dlopen' -flags. - -If any of the ARGS are libtool executable wrappers, then they are translated -into their corresponding uninstalled binary, and any of their required library -directories are added to the library path. - -Then, COMMAND is executed, with ARGS as arguments." - ;; - -finish) - $echo \ -"Usage: $modename [OPTION]... --mode=finish [LIBDIR]... - -Complete the installation of libtool libraries. - -Each LIBDIR is a directory that contains libtool libraries. - -The commands that this mode executes may require superuser privileges. Use -the \`--dry-run' option if you just want to see what would be executed." - ;; - -install) - $echo \ -"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND... - -Install executables or libraries. - -INSTALL-COMMAND is the installation command. The first component should be -either the \`install' or \`cp' program. - -The rest of the components are interpreted as arguments to that command (only -BSD-compatible install options are recognized)." - ;; - -link) - $echo \ -"Usage: $modename [OPTION]... --mode=link LINK-COMMAND... +exit $exit_status -Link object files or libraries together to form another library, or to -create an executable program. - -LINK-COMMAND is a command using the C compiler that you would use to create -a program from several object files. - -The following components of LINK-COMMAND are treated specially: - - -all-static do not do any dynamic linking at all - -avoid-version do not add a version suffix if possible - -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime - -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols - -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) - -export-symbols SYMFILE - try to export only the symbols listed in SYMFILE - -export-symbols-regex REGEX - try to export only the symbols matching REGEX - -LLIBDIR search LIBDIR for required installed libraries - -lNAME OUTPUT-FILE requires the installed library libNAME - -module build a library that can dlopened - -no-fast-install disable the fast-install mode - -no-install link a not-installable executable - -no-undefined declare that a library does not refer to external symbols - -o OUTPUT-FILE create OUTPUT-FILE from the specified objects - -objectlist FILE Use a list of object files found in FILE to specify objects - -precious-files-regex REGEX - don't remove output files matching REGEX - -release RELEASE specify package release information - -rpath LIBDIR the created library will eventually be installed in LIBDIR - -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries - -static do not do any dynamic linking of libtool libraries - -version-info CURRENT[:REVISION[:AGE]] - specify library version info [each variable defaults to 0] - -All other options (arguments beginning with \`-') are ignored. - -Every other argument is treated as a filename. Files ending in \`.la' are -treated as uninstalled libtool libraries, other files are standard or library -object files. - -If the OUTPUT-FILE ends in \`.la', then a libtool library is created, -only library objects (\`.lo' files) may be specified, and \`-rpath' is -required, except when creating a convenience library. - -If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created -using \`ar' and \`ranlib', or on Windows using \`lib'. - -If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file -is created, otherwise an executable program is created." - ;; - -uninstall) - $echo \ -"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... - -Remove libraries from an installation directory. - -RM is the name of the program to use to delete files associated with each FILE -(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed -to RM. - -If FILE is a libtool library, all the files associated with it are deleted. -Otherwise, only FILE itself is deleted using RM." - ;; - -*) - $echo "$modename: invalid operation mode \`$mode'" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - ;; -esac - -$echo -$echo "Try \`$modename --help' for more information about other modes." - -exit $? # The TAGs below are defined such that we never get into a situation # in which we disable both kinds of libraries. Given conflicting @@ -6634,10 +9650,12 @@ build_old_libs=yes # ### END LIBTOOL TAG CONFIG: disable-shared # ### BEGIN LIBTOOL TAG CONFIG: disable-static -build_old_libs=`case $build_libtool_libs in yes) $echo no;; *) $echo yes;; esac` +build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` # ### END LIBTOOL TAG CONFIG: disable-static # Local Variables: # mode:shell-script # sh-indentation:2 # End: +# vi:sw=2 + --- libcoyotl-3.1.0.orig/Makefile.in +++ libcoyotl-3.1.0/Makefile.in @@ -1,8 +1,9 @@ -# Makefile.in generated by automake 1.9.6 from Makefile.am. +# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005 Free Software Foundation, Inc. +# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, +# Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -13,15 +14,12 @@ # PARTICULAR PURPOSE. @SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ -top_builddir = . +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -INSTALL = @INSTALL@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c @@ -35,27 +33,34 @@ PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ +subdir = . DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ $(srcdir)/Makefile.in $(srcdir)/libcoyotl.pc.in \ $(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \ config.guess config.sub depcomp install-sh ltmain.sh missing -subdir = . ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ - configure.lineno configure.status.lineno + configure.lineno config.status.lineno mkinstalldirs = $(install_sh) -d CONFIG_CLEAN_FILES = libcoyotl.pc +CONFIG_CLEAN_VPATH_FILES = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ - install-exec-recursive install-info-recursive \ - install-recursive installcheck-recursive installdirs-recursive \ - pdf-recursive ps-recursive uninstall-info-recursive \ - uninstall-recursive + install-dvi-recursive install-exec-recursive \ + install-html-recursive install-info-recursive \ + install-pdf-recursive install-ps-recursive install-recursive \ + installcheck-recursive installdirs-recursive pdf-recursive \ + ps-recursive uninstall-recursive +RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive +AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ + $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ + distdir dist dist-all distcheck ETAGS = etags CTAGS = ctags DIST_SUBDIRS = libcoyotl test docs @@ -63,16 +68,39 @@ DISTFILES = $(DIST_COMMON) $(DIST_SOURCE distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ - { test ! -d $(distdir) \ - || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ - && rm -fr $(distdir); }; } + { test ! -d "$(distdir)" \ + || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ + && rm -fr "$(distdir)"; }; } +am__relativize = \ + dir0=`pwd`; \ + sed_first='s,^\([^/]*\)/.*$$,\1,'; \ + sed_rest='s,^[^/]*/*,,'; \ + sed_last='s,^.*/\([^/]*\)$$,\1,'; \ + sed_butlast='s,/*[^/]*$$,,'; \ + while test -n "$$dir1"; do \ + first=`echo "$$dir1" | sed -e "$$sed_first"`; \ + if test "$$first" != "."; then \ + if test "$$first" = ".."; then \ + dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ + dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ + else \ + first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ + if test "$$first2" = "$$first"; then \ + dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ + else \ + dir2="../$$dir2"; \ + fi; \ + dir0="$$dir0"/"$$first"; \ + fi; \ + fi; \ + dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ + done; \ + reldir="$$dir2" DIST_ARCHIVES = $(distdir).tar.gz GZIP_ENV = --best distuninstallcheck_listfiles = find . -type f -print distcleancheck_listfiles = find . -type f -print ACLOCAL = @ACLOCAL@ -AMDEP_FALSE = @AMDEP_FALSE@ -AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ AR = @AR@ AUTOCONF = @AUTOCONF@ @@ -91,55 +119,65 @@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ -ECHO = @ECHO@ +DLLTOOL = @DLLTOOL@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ -F77 = @F77@ -FFLAGS = @FFLAGS@ +FGREP = @FGREP@ GENERIC_LIBRARY_NAME = @GENERIC_LIBRARY_NAME@ GENERIC_LIBRARY_VERSION = @GENERIC_LIBRARY_VERSION@ GENERIC_RELEASE = @GENERIC_RELEASE@ GENERIC_VERSION = @GENERIC_VERSION@ +GREP = @GREP@ HAVE_DOXYGEN = @HAVE_DOXYGEN@ -HAVE_DOXYGEN_FALSE = @HAVE_DOXYGEN_FALSE@ -HAVE_DOXYGEN_TRUE = @HAVE_DOXYGEN_TRUE@ +INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ +MKDIR_P = @MKDIR_P@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ +SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ -ac_ct_F77 = @ac_ct_F77@ -ac_ct_RANLIB = @ac_ct_RANLIB@ -ac_ct_STRIP = @ac_ct_STRIP@ -am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ -am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ -am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ -am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ @@ -151,28 +189,40 @@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ +builddir = @builddir@ datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ +htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ +localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ +psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ SUBDIRS = libcoyotl test $(DOC_DIR) EXTRA_DIST = LICENSE.GPL LICENSE.POLICY LICENSE.NON-FREE reconf @HAVE_DOXYGEN_FALSE@DOC_DIR = @@ -186,15 +236,15 @@ $(srcdir)/Makefile.in: $(srcdir)/Makefi @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ - echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \ - cd $(srcdir) && $(AUTOMAKE) --foreign \ + echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ + $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ && exit 0; \ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign Makefile + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ @@ -210,9 +260,10 @@ $(top_builddir)/config.status: $(top_src $(SHELL) ./config.status --recheck $(top_srcdir)/configure: $(am__configure_deps) - cd $(srcdir) && $(AUTOCONF) + $(am__cd) $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) + $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) +$(am__aclocal_m4_deps): libcoyotl.pc: $(top_builddir)/config.status $(srcdir)/libcoyotl.pc.in cd $(top_builddir) && $(SHELL) ./config.status $@ @@ -223,8 +274,7 @@ clean-libtool: -rm -rf .libs _libs distclean-libtool: - -rm -f libtool -uninstall-info-am: + -rm -f libtool config.lt # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. @@ -233,7 +283,7 @@ uninstall-info-am: # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): - @failcom='exit 1'; \ + @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ @@ -250,16 +300,15 @@ $(RECURSIVE_TARGETS): else \ local_target="$$target"; \ fi; \ - (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" -mostlyclean-recursive clean-recursive distclean-recursive \ -maintainer-clean-recursive: - @failcom='exit 1'; \ +$(RECURSIVE_CLEAN_TARGETS): + @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ @@ -285,16 +334,16 @@ maintainer-clean-recursive: else \ local_target="$$target"; \ fi; \ - (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) @@ -302,14 +351,14 @@ ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) - tags=; \ + set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ @@ -321,93 +370,114 @@ TAGS: tags-recursive $(HEADERS) $(SOURCE list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ - tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ + set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - test -z "$(CTAGS_ARGS)$$tags$$unique" \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$tags $$unique + $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) $(am__remove_distdir) - mkdir $(distdir) - $(mkdir_p) $(distdir)/. - @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ - list='$(DISTFILES)'; for file in $$list; do \ - case $$file in \ - $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ - $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ - esac; \ + test -d "$(distdir)" || mkdir "$(distdir)" + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkdir_p) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done - list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ - || $(mkdir_p) "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ - distdir=`$(am__cd) $(distdir) && pwd`; \ - top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ - (cd $$subdir && \ + fi; \ + done + @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ + $(am__relativize); \ + new_distdir=$$reldir; \ + dir1=$$subdir; dir2="$(top_distdir)"; \ + $(am__relativize); \ + new_top_distdir=$$reldir; \ + echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ + echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ + ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$$top_distdir" \ - distdir="$$distdir/$$subdir" \ + top_distdir="$$new_top_distdir" \ + distdir="$$new_distdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ + am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done - -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ + -test -n "$(am__skip_mode_fix)" \ + || find "$(distdir)" -type d ! -perm -755 \ + -exec chmod u+rwx,go+rx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ - || chmod -R a+r $(distdir) + ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ + || chmod -R a+r "$(distdir)" dist-gzip: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) @@ -416,6 +486,14 @@ dist-bzip2: distdir tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 $(am__remove_distdir) +dist-lzma: distdir + tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma + $(am__remove_distdir) + +dist-xz: distdir + tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz + $(am__remove_distdir) + dist-tarZ: distdir tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__remove_distdir) @@ -439,13 +517,17 @@ dist dist-all: distdir distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ - GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ + GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ - bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ + bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ + *.tar.lzma*) \ + lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\ + *.tar.xz*) \ + xz -dc $(distdir).tar.xz | $(am__untar) ;;\ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ - GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ + GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ esac @@ -453,9 +535,11 @@ distcheck: dist mkdir $(distdir)/_build mkdir $(distdir)/_inst chmod a-w $(distdir) + test -d $(distdir)/_build || exit 0; \ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ - && cd $(distdir)/_build \ + && am__cwd=`pwd` \ + && $(am__cd) $(distdir)/_build \ && ../configure --srcdir=.. --prefix="$$dc_install_base" \ $(DISTCHECK_CONFIGURE_FLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) \ @@ -477,13 +561,15 @@ distcheck: dist && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist \ && rm -rf $(DIST_ARCHIVES) \ - && $(MAKE) $(AM_MAKEFLAGS) distcleancheck + && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ + && cd "$$am__cwd" \ + || exit 1 $(am__remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ - sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}' + sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' distuninstallcheck: - @cd $(distuninstallcheck_dir) \ + @$(am__cd) '$(distuninstallcheck_dir)' \ && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ @@ -525,6 +611,7 @@ clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @@ -545,18 +632,38 @@ dvi-am: html: html-recursive +html-am: + info: info-recursive info-am: install-data-am: +install-dvi: install-dvi-recursive + +install-dvi-am: + install-exec-am: +install-html: install-html-recursive + +install-html-am: + install-info: install-info-recursive +install-info-am: + install-man: +install-pdf: install-pdf-recursive + +install-pdf-am: + +install-ps: install-ps-recursive + +install-ps-am: + installcheck-am: maintainer-clean: maintainer-clean-recursive @@ -577,24 +684,27 @@ ps: ps-recursive ps-am: -uninstall-am: uninstall-info-am +uninstall-am: -uninstall-info: uninstall-info-recursive +.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ + install-am install-strip tags-recursive -.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \ - check-am clean clean-generic clean-libtool clean-recursive \ - ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \ - dist-shar dist-tarZ dist-zip distcheck distclean \ - distclean-generic distclean-libtool distclean-recursive \ +.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ + all all-am am--refresh check check-am clean clean-generic \ + clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \ + dist-gzip dist-lzma dist-shar dist-tarZ dist-xz dist-zip \ + distcheck distclean distclean-generic distclean-libtool \ distclean-tags distcleancheck distdir distuninstallcheck dvi \ dvi-am html html-am info info-am install install-am \ - install-data install-data-am install-exec install-exec-am \ - install-info install-info-am install-man install-strip \ + install-data install-data-am install-dvi install-dvi-am \ + install-exec install-exec-am install-html install-html-am \ + install-info install-info-am install-man install-pdf \ + install-pdf-am install-ps install-ps-am install-strip \ installcheck installcheck-am installdirs installdirs-am \ - maintainer-clean maintainer-clean-generic \ - maintainer-clean-recursive mostlyclean mostlyclean-generic \ - mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \ - tags tags-recursive uninstall uninstall-am uninstall-info-am + maintainer-clean maintainer-clean-generic mostlyclean \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ + tags tags-recursive uninstall uninstall-am + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. --- libcoyotl-3.1.0.orig/config.guess +++ libcoyotl-3.1.0/config.guess @@ -1,9 +1,10 @@ #! /bin/sh # Attempt to guess a canonical system name. # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, -# 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc. +# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, +# 2011, 2012 Free Software Foundation, Inc. -timestamp='2005-05-27' +timestamp='2012-02-10' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by @@ -16,9 +17,7 @@ timestamp='2005-05-27' # General Public License for more details. # # You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA -# 02110-1301, USA. +# along with this program; if not, see . # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a @@ -26,16 +25,16 @@ timestamp='2005-05-27' # the same distribution terms that you use for the rest of that program. -# Originally written by Per Bothner . -# Please send patches to . Submit a context -# diff and a properly formatted ChangeLog entry. +# Originally written by Per Bothner. Please send patches (context +# diff format) to and include a ChangeLog +# entry. # # This script attempts to guess a canonical system name similar to # config.sub. If it succeeds, it prints the system name on stdout, and # exits with 0. Otherwise, it exits with 1. # -# The plan is that this can be called by configure scripts if you -# don't specify an explicit build system type. +# You can get the latest version of this script from: +# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD me=`echo "$0" | sed -e 's,.*/,,'` @@ -55,7 +54,8 @@ version="\ GNU config.guess ($timestamp) Originally written by Per Bothner. -Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, +2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO @@ -106,7 +106,7 @@ set_cc_for_build=' trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; : ${TMPDIR=/tmp} ; - { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || + { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; @@ -125,7 +125,7 @@ case $CC_FOR_BUILD,$HOST_CC,$CC in ;; ,,*) CC_FOR_BUILD=$CC ;; ,*,*) CC_FOR_BUILD=$HOST_CC ;; -esac ;' +esac ; set_cc_for_build= ;' # This is needed to find uname on a Pyramid OSx when run in the BSD universe. # (ghazi@noc.rutgers.edu 1994-08-24) @@ -138,29 +138,12 @@ UNAME_RELEASE=`(uname -r) 2>/dev/null` | UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown -if [ "${UNAME_SYSTEM}" = "Linux" ] ; then - eval $set_cc_for_build - cat << EOF > $dummy.c - #include - #ifdef __UCLIBC__ - # ifdef __UCLIBC_CONFIG_VERSION__ - LIBC=uclibc __UCLIBC_CONFIG_VERSION__ - # else - LIBC=uclibc - # endif - #else - LIBC=gnu - #endif -EOF - eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep LIBC= | sed -e 's: ::g'` -fi - # Note: order is significant - the case branches are not exclusive. case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in *:NetBSD:*:*) # NetBSD (nbsd) targets should (where applicable) match one or - # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, + # more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*, # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently # switched to ELF, *-*-netbsd* would select the old # object file format. This provides both forward @@ -177,6 +160,7 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:$ arm*) machine=arm-unknown ;; sh3el) machine=shl-unknown ;; sh3eb) machine=sh-unknown ;; + sh5el) machine=sh5le-unknown ;; *) machine=${UNAME_MACHINE_ARCH}-unknown ;; esac # The Operating System including object format, if it has switched @@ -185,7 +169,7 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:$ arm*|i386|m68k|ns32k|sh3*|sparc|vax) eval $set_cc_for_build if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ - | grep __ELF__ >/dev/null + | grep -q __ELF__ then # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). # Return netbsd for either. FIX? @@ -195,7 +179,7 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:$ fi ;; *) - os=netbsd + os=netbsd ;; esac # The OS release @@ -216,50 +200,18 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:$ # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. echo "${machine}-${os}${release}" exit ;; - amd64:OpenBSD:*:*) - echo x86_64-unknown-openbsd${UNAME_RELEASE} - exit ;; - amiga:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit ;; - cats:OpenBSD:*:*) - echo arm-unknown-openbsd${UNAME_RELEASE} - exit ;; - hp300:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit ;; - luna88k:OpenBSD:*:*) - echo m88k-unknown-openbsd${UNAME_RELEASE} - exit ;; - mac68k:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit ;; - macppc:OpenBSD:*:*) - echo powerpc-unknown-openbsd${UNAME_RELEASE} - exit ;; - mvme68k:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit ;; - mvme88k:OpenBSD:*:*) - echo m88k-unknown-openbsd${UNAME_RELEASE} - exit ;; - mvmeppc:OpenBSD:*:*) - echo powerpc-unknown-openbsd${UNAME_RELEASE} - exit ;; - sgi:OpenBSD:*:*) - echo mips64-unknown-openbsd${UNAME_RELEASE} - exit ;; - sun3:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit ;; *:OpenBSD:*:*) - echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE} + UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` + echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} exit ;; *:ekkoBSD:*:*) echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} exit ;; + *:SolidBSD:*:*) + echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE} + exit ;; macppc:MirBSD:*:*) - echo powerppc-unknown-mirbsd${UNAME_RELEASE} + echo powerpc-unknown-mirbsd${UNAME_RELEASE} exit ;; *:MirBSD:*:*) echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} @@ -270,7 +222,7 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:$ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` ;; *5.*) - UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` ;; esac # According to Compaq, /usr/sbin/psrinfo has been available on @@ -316,7 +268,10 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:$ # A Xn.n version is an unreleased experimental baselevel. # 1.2 uses "1.2" for uname -r. echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` - exit ;; + # Reset EXIT trap before exiting to avoid spurious non-zero exit code. + exitcode=$? + trap '' 0 + exit $exitcode ;; Alpha\ *:Windows_NT*:*) # How do we know it's Interix rather than the generic POSIX subsystem? # Should we change UNAME_MACHINE based on the output of uname instead @@ -342,7 +297,7 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:$ echo s390-ibm-zvmoe exit ;; *:OS400:*:*) - echo powerpc-ibm-os400 + echo powerpc-ibm-os400 exit ;; arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) echo arm-acorn-riscix${UNAME_RELEASE} @@ -371,14 +326,33 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:$ case `/usr/bin/uname -p` in sparc) echo sparc-icl-nx7; exit ;; esac ;; + s390x:SunOS:*:*) + echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; sun4H:SunOS:5.*:*) echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; - i86pc:SunOS:5.*:*) - echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*) + echo i386-pc-auroraux${UNAME_RELEASE} + exit ;; + i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) + eval $set_cc_for_build + SUN_ARCH="i386" + # If there is a compiler, see if it is configured for 64-bit objects. + # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. + # This test works for both compilers. + if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then + if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ + (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ + grep IS_64BIT_ARCH >/dev/null + then + SUN_ARCH="x86_64" + fi + fi + echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; sun4*:SunOS:6*:*) # According to config.sub, this is the proper way to canonicalize @@ -422,23 +396,23 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:$ # MiNT. But MiNT is downward compatible to TOS, so this should # be no problem. atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} + echo m68k-atari-mint${UNAME_RELEASE} exit ;; atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} - exit ;; + exit ;; *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} + echo m68k-atari-mint${UNAME_RELEASE} exit ;; milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) - echo m68k-milan-mint${UNAME_RELEASE} - exit ;; + echo m68k-milan-mint${UNAME_RELEASE} + exit ;; hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) - echo m68k-hades-mint${UNAME_RELEASE} - exit ;; + echo m68k-hades-mint${UNAME_RELEASE} + exit ;; *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) - echo m68k-unknown-mint${UNAME_RELEASE} - exit ;; + echo m68k-unknown-mint${UNAME_RELEASE} + exit ;; m68k:machten:*:*) echo m68k-apple-machten${UNAME_RELEASE} exit ;; @@ -508,8 +482,8 @@ EOF echo m88k-motorola-sysv3 exit ;; AViiON:dgux:*:*) - # DG/UX returns AViiON for all architectures - UNAME_PROCESSOR=`/usr/bin/uname -p` + # DG/UX returns AViiON for all architectures + UNAME_PROCESSOR=`/usr/bin/uname -p` if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] then if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ @@ -522,7 +496,7 @@ EOF else echo i586-dg-dgux${UNAME_RELEASE} fi - exit ;; + exit ;; M88*:DolphinOS:*:*) # DolphinOS (SVR3) echo m88k-dolphin-sysv3 exit ;; @@ -579,7 +553,7 @@ EOF echo rs6000-ibm-aix3.2 fi exit ;; - *:AIX:*:[45]) + *:AIX:*:[4567]) IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then IBM_ARCH=rs6000 @@ -622,52 +596,52 @@ EOF 9000/[678][0-9][0-9]) if [ -x /usr/bin/getconf ]; then sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` - sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` - case "${sc_cpu_version}" in - 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 - 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 - 532) # CPU_PA_RISC2_0 - case "${sc_kernel_bits}" in - 32) HP_ARCH="hppa2.0n" ;; - 64) HP_ARCH="hppa2.0w" ;; + sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` + case "${sc_cpu_version}" in + 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 + 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 + 532) # CPU_PA_RISC2_0 + case "${sc_kernel_bits}" in + 32) HP_ARCH="hppa2.0n" ;; + 64) HP_ARCH="hppa2.0w" ;; '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 - esac ;; - esac + esac ;; + esac fi if [ "${HP_ARCH}" = "" ]; then eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c + sed 's/^ //' << EOF >$dummy.c + + #define _HPUX_SOURCE + #include + #include - #define _HPUX_SOURCE - #include - #include - - int main () - { - #if defined(_SC_KERNEL_BITS) - long bits = sysconf(_SC_KERNEL_BITS); - #endif - long cpu = sysconf (_SC_CPU_VERSION); - - switch (cpu) - { - case CPU_PA_RISC1_0: puts ("hppa1.0"); break; - case CPU_PA_RISC1_1: puts ("hppa1.1"); break; - case CPU_PA_RISC2_0: - #if defined(_SC_KERNEL_BITS) - switch (bits) - { - case 64: puts ("hppa2.0w"); break; - case 32: puts ("hppa2.0n"); break; - default: puts ("hppa2.0"); break; - } break; - #else /* !defined(_SC_KERNEL_BITS) */ - puts ("hppa2.0"); break; - #endif - default: puts ("hppa1.0"); break; - } - exit (0); - } + int main () + { + #if defined(_SC_KERNEL_BITS) + long bits = sysconf(_SC_KERNEL_BITS); + #endif + long cpu = sysconf (_SC_CPU_VERSION); + + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1"); break; + case CPU_PA_RISC2_0: + #if defined(_SC_KERNEL_BITS) + switch (bits) + { + case 64: puts ("hppa2.0w"); break; + case 32: puts ("hppa2.0n"); break; + default: puts ("hppa2.0"); break; + } break; + #else /* !defined(_SC_KERNEL_BITS) */ + puts ("hppa2.0"); break; + #endif + default: puts ("hppa1.0"); break; + } + exit (0); + } EOF (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` test -z "$HP_ARCH" && HP_ARCH=hppa @@ -675,8 +649,7 @@ EOF esac if [ ${HP_ARCH} = "hppa2.0w" ] then - # avoid double evaluation of $set_cc_for_build - test -n "$CC_FOR_BUILD" || eval $set_cc_for_build + eval $set_cc_for_build # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler @@ -688,7 +661,7 @@ EOF # => hppa64-hp-hpux11.23 if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | - grep __LP64__ >/dev/null + grep -q __LP64__ then HP_ARCH="hppa2.0w" else @@ -759,22 +732,22 @@ EOF exit ;; C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) echo c1-convex-bsd - exit ;; + exit ;; C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) if getsysinfo -f scalar_acc then echo c32-convex-bsd else echo c2-convex-bsd fi - exit ;; + exit ;; C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) echo c34-convex-bsd - exit ;; + exit ;; C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) echo c38-convex-bsd - exit ;; + exit ;; C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) echo c4-convex-bsd - exit ;; + exit ;; CRAY*Y-MP:*:*:*) echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; @@ -798,14 +771,14 @@ EOF exit ;; F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` - FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` - FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` - echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" - exit ;; + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` + echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; 5000:UNIX_System_V:4.*:*) - FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` - FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` - echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` + echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" exit ;; i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} @@ -817,27 +790,48 @@ EOF echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} exit ;; *:FreeBSD:*:*) - echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` + UNAME_PROCESSOR=`/usr/bin/uname -p` + case ${UNAME_PROCESSOR} in + amd64) + echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + *) + echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + esac exit ;; i*:CYGWIN*:*) echo ${UNAME_MACHINE}-pc-cygwin exit ;; - i*:MINGW*:*) + *:MINGW*:*) echo ${UNAME_MACHINE}-pc-mingw32 exit ;; + i*:MSYS*:*) + echo ${UNAME_MACHINE}-pc-msys + exit ;; i*:windows32*:*) - # uname -m includes "-pc" on this system. - echo ${UNAME_MACHINE}-mingw32 + # uname -m includes "-pc" on this system. + echo ${UNAME_MACHINE}-mingw32 exit ;; i*:PW*:*) echo ${UNAME_MACHINE}-pc-pw32 exit ;; - x86:Interix*:[34]*) - echo i586-pc-interix${UNAME_RELEASE}|sed -e 's/\..*//' - exit ;; + *:Interix*:*) + case ${UNAME_MACHINE} in + x86) + echo i586-pc-interix${UNAME_RELEASE} + exit ;; + authenticamd | genuineintel | EM64T) + echo x86_64-unknown-interix${UNAME_RELEASE} + exit ;; + IA64) + echo ia64-unknown-interix${UNAME_RELEASE} + exit ;; + esac ;; [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) echo i${UNAME_MACHINE}-pc-mks exit ;; + 8664:Windows_NT:*) + echo x86_64-pc-mks + exit ;; i*:Windows_NT*:* | Pentium*:Windows_NT*:*) # How do we know it's Interix rather than the generic POSIX subsystem? # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we @@ -847,7 +841,7 @@ EOF i*:UWIN*:*) echo ${UNAME_MACHINE}-pc-uwin exit ;; - amd64:CYGWIN*:*:*) + amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) echo x86_64-unknown-cygwin exit ;; p*:CYGWIN*:*) @@ -867,171 +861,144 @@ EOF i*86:Minix:*:*) echo ${UNAME_MACHINE}-pc-minix exit ;; + aarch64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + aarch64_be:Linux:*:*) + UNAME_MACHINE=aarch64_be + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + alpha:Linux:*:*) + case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in + EV5) UNAME_MACHINE=alphaev5 ;; + EV56) UNAME_MACHINE=alphaev56 ;; + PCA56) UNAME_MACHINE=alphapca56 ;; + PCA57) UNAME_MACHINE=alphapca56 ;; + EV6) UNAME_MACHINE=alphaev6 ;; + EV67) UNAME_MACHINE=alphaev67 ;; + EV68*) UNAME_MACHINE=alphaev68 ;; + esac + objdump --private-headers /bin/sh | grep -q ld.so.1 + if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi + echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} + exit ;; arm*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + eval $set_cc_for_build + if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ARM_EABI__ + then + echo ${UNAME_MACHINE}-unknown-linux-gnu + else + if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ARM_PCS_VFP + then + echo ${UNAME_MACHINE}-unknown-linux-gnueabi + else + echo ${UNAME_MACHINE}-unknown-linux-gnueabihf + fi + fi + exit ;; + avr32*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; cris:Linux:*:*) - echo cris-axis-linux-${LIBC} + echo ${UNAME_MACHINE}-axis-linux-gnu exit ;; crisv32:Linux:*:*) - echo crisv32-axis-linux-${LIBC} + echo ${UNAME_MACHINE}-axis-linux-gnu exit ;; frv:Linux:*:*) - echo frv-unknown-linux-${LIBC} + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + hexagon:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + i*86:Linux:*:*) + LIBC=gnu + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #ifdef __dietlibc__ + LIBC=dietlibc + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'` + echo "${UNAME_MACHINE}-pc-linux-${LIBC}" exit ;; ia64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; m32r*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; m68*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; - mips:Linux:*:*) + mips:Linux:*:* | mips64:Linux:*:*) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #undef CPU - #undef mips - #undef mipsel + #undef ${UNAME_MACHINE} + #undef ${UNAME_MACHINE}el #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) - CPU=mipsel + CPU=${UNAME_MACHINE}el #else #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) - CPU=mips + CPU=${UNAME_MACHINE} #else CPU= #endif #endif EOF - eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` - test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; } + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'` + test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } ;; - mips64:Linux:*:*) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #undef CPU - #undef mips64 - #undef mips64el - #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) - CPU=mips64el - #else - #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) - CPU=mips64 - #else - CPU= - #endif - #endif -EOF - eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` - test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; } - ;; - ppc:Linux:*:*) - echo powerpc-unknown-linux-${LIBC} + or32:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; - ppc64:Linux:*:*) - echo powerpc64-unknown-linux-${LIBC} + padre:Linux:*:*) + echo sparc-unknown-linux-gnu exit ;; - alpha:Linux:*:*) - case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in - EV5) UNAME_MACHINE=alphaev5 ;; - EV56) UNAME_MACHINE=alphaev56 ;; - PCA56) UNAME_MACHINE=alphapca56 ;; - PCA57) UNAME_MACHINE=alphapca56 ;; - EV6) UNAME_MACHINE=alphaev6 ;; - EV67) UNAME_MACHINE=alphaev67 ;; - EV68*) UNAME_MACHINE=alphaev68 ;; - esac - objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null - if test "$?" = 0 ; then LIBC="gnulibc1" ; fi - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + parisc64:Linux:*:* | hppa64:Linux:*:*) + echo hppa64-unknown-linux-gnu exit ;; parisc:Linux:*:* | hppa:Linux:*:*) # Look for CPU level case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in - PA7*) echo hppa1.1-unknown-linux-${LIBC} ;; - PA8*) echo hppa2.0-unknown-linux-${LIBC} ;; - *) echo hppa-unknown-linux-${LIBC} ;; + PA7*) echo hppa1.1-unknown-linux-gnu ;; + PA8*) echo hppa2.0-unknown-linux-gnu ;; + *) echo hppa-unknown-linux-gnu ;; esac exit ;; - parisc64:Linux:*:* | hppa64:Linux:*:*) - echo hppa64-unknown-linux-${LIBC} + ppc64:Linux:*:*) + echo powerpc64-unknown-linux-gnu + exit ;; + ppc:Linux:*:*) + echo powerpc-unknown-linux-gnu exit ;; s390:Linux:*:* | s390x:Linux:*:*) echo ${UNAME_MACHINE}-ibm-linux exit ;; sh64*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; sh*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; sparc:Linux:*:* | sparc64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + tile*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + vax:Linux:*:*) + echo ${UNAME_MACHINE}-dec-linux-gnu exit ;; x86_64:Linux:*:*) - echo x86_64-unknown-linux-${LIBC} + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + xtensa*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; - i*86:Linux:*:*) - # The BFD linker knows what the default object file format is, so - # first see if it will tell us. cd to the root directory to prevent - # problems with other programs or directories called `ld' in the path. - # Set LC_ALL=C to ensure ld outputs messages in English. - ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \ - | sed -ne '/supported targets:/!d - s/[ ][ ]*/ /g - s/.*supported targets: *// - s/ .*// - p'` - case "$ld_supported_targets" in - elf32-i386) - TENTATIVE="${UNAME_MACHINE}-pc-linux-${LIBC}" - ;; - a.out-i386-linux) - echo "${UNAME_MACHINE}-pc-linux-${LIBC}aout" - exit ;; - coff-i386) - echo "${UNAME_MACHINE}-pc-linux-${LIBC}coff" - exit ;; - "") - # Either a pre-BFD a.out linker (linux-gnuoldld) or - # one that does not give us useful --help. - echo "${UNAME_MACHINE}-pc-linux-${LIBC}oldld" - exit ;; - esac - if [ "$LIBC" != "gnu" ] ; then echo "$TENTATIVE" && exit 0 ; fi - # Determine whether the default compiler is a.out or elf - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #include - #ifdef __ELF__ - # ifdef __GLIBC__ - # if __GLIBC__ >= 2 - LIBC=gnu - # else - LIBC=gnulibc1 - # endif - # else - LIBC=gnulibc1 - # endif - #else - #ifdef __INTEL_COMPILER - LIBC=gnu - #else - LIBC=gnuaout - #endif - #endif - #ifdef __dietlibc__ - LIBC=dietlibc - #endif -EOF - eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=` - test x"${LIBC}" != x && { - echo "${UNAME_MACHINE}-pc-linux-${LIBC}" - exit - } - test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; } - ;; i*86:DYNIX/ptx:4*:*) # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. # earlier versions are messed up and put the nodename in both @@ -1039,11 +1006,11 @@ EOF echo i386-sequent-sysv4 exit ;; i*86:UNIX_SV:4.2MP:2.*) - # Unixware is an offshoot of SVR4, but it has its own version - # number series starting with 2... - # I am not positive that other SVR4 systems won't match this, + # Unixware is an offshoot of SVR4, but it has its own version + # number series starting with 2... + # I am not positive that other SVR4 systems won't match this, # I just have to hope. -- rms. - # Use sysv4.2uw... so that sysv4* matches it. + # Use sysv4.2uw... so that sysv4* matches it. echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} exit ;; i*86:OS/2:*:*) @@ -1060,7 +1027,7 @@ EOF i*86:syllable:*:*) echo ${UNAME_MACHINE}-pc-syllable exit ;; - i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) + i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*) echo i386-unknown-lynxos${UNAME_RELEASE} exit ;; i*86:*DOS:*:*) @@ -1075,7 +1042,7 @@ EOF fi exit ;; i*86:*:5:[678]*) - # UnixWare 7.x, OpenUNIX and OpenServer 6. + # UnixWare 7.x, OpenUNIX and OpenServer 6. case `/bin/uname -X | grep "^Machine"` in *486*) UNAME_MACHINE=i486 ;; *Pentium) UNAME_MACHINE=i586 ;; @@ -1103,10 +1070,13 @@ EOF exit ;; pc:*:*:*) # Left here for compatibility: - # uname -m prints for DJGPP always 'pc', but it prints nothing about - # the processor, so we play safe by assuming i386. - echo i386-pc-msdosdjgpp - exit ;; + # uname -m prints for DJGPP always 'pc', but it prints nothing about + # the processor, so we play safe by assuming i586. + # Note: whatever this is, it MUST be the same as what config.sub + # prints for the "djgpp" host, or else GDB configury will decide that + # this is a cross-build. + echo i586-pc-msdosdjgpp + exit ;; Intel:Mach:3*:*) echo i386-pc-mach3 exit ;; @@ -1141,8 +1111,18 @@ EOF /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && { echo i486-ncr-sysv4; exit; } ;; + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4; exit; } ;; + NCR*:*:4.2:* | MPRAS*:*:4.2:*) + OS_REL='.3' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) echo m68k-unknown-lynxos${UNAME_RELEASE} exit ;; @@ -1155,7 +1135,7 @@ EOF rs6000:LynxOS:2.*:*) echo rs6000-unknown-lynxos${UNAME_RELEASE} exit ;; - PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*) + PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*) echo powerpc-unknown-lynxos${UNAME_RELEASE} exit ;; SM[BE]S:UNIX_SV:*:*) @@ -1175,10 +1155,10 @@ EOF echo ns32k-sni-sysv fi exit ;; - PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort - # says - echo i586-unisys-sysv4 - exit ;; + PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort + # says + echo i586-unisys-sysv4 + exit ;; *:UNIX_System_V:4*:FTX*) # From Gerald Hewes . # How about differentiating between stratus architectures? -djm @@ -1204,11 +1184,11 @@ EOF exit ;; R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) if [ -d /usr/nec ]; then - echo mips-nec-sysv${UNAME_RELEASE} + echo mips-nec-sysv${UNAME_RELEASE} else - echo mips-unknown-sysv${UNAME_RELEASE} + echo mips-unknown-sysv${UNAME_RELEASE} fi - exit ;; + exit ;; BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. echo powerpc-be-beos exit ;; @@ -1218,6 +1198,9 @@ EOF BePC:BeOS:*:*) # BeOS running on Intel PC compatible. echo i586-pc-beos exit ;; + BePC:Haiku:*:*) # Haiku running on Intel PC compatible. + echo i586-pc-haiku + exit ;; SX-4:SUPER-UX:*:*) echo sx4-nec-superux${UNAME_RELEASE} exit ;; @@ -1227,6 +1210,15 @@ EOF SX-6:SUPER-UX:*:*) echo sx6-nec-superux${UNAME_RELEASE} exit ;; + SX-7:SUPER-UX:*:*) + echo sx7-nec-superux${UNAME_RELEASE} + exit ;; + SX-8:SUPER-UX:*:*) + echo sx8-nec-superux${UNAME_RELEASE} + exit ;; + SX-8R:SUPER-UX:*:*) + echo sx8r-nec-superux${UNAME_RELEASE} + exit ;; Power*:Rhapsody:*:*) echo powerpc-apple-rhapsody${UNAME_RELEASE} exit ;; @@ -1236,7 +1228,16 @@ EOF *:Darwin:*:*) UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown case $UNAME_PROCESSOR in - *86) UNAME_PROCESSOR=i686 ;; + i386) + eval $set_cc_for_build + if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then + if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \ + (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ + grep IS_64BIT_ARCH >/dev/null + then + UNAME_PROCESSOR="x86_64" + fi + fi ;; unknown) UNAME_PROCESSOR=powerpc ;; esac echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} @@ -1252,6 +1253,9 @@ EOF *:QNX:*:4*) echo i386-pc-qnx exit ;; + NEO-?:NONSTOP_KERNEL:*:*) + echo neo-tandem-nsk${UNAME_RELEASE} + exit ;; NSE-?:NONSTOP_KERNEL:*:*) echo nse-tandem-nsk${UNAME_RELEASE} exit ;; @@ -1297,13 +1301,13 @@ EOF echo pdp10-unknown-its exit ;; SEI:*:*:SEIUX) - echo mips-sei-seiux${UNAME_RELEASE} + echo mips-sei-seiux${UNAME_RELEASE} exit ;; *:DragonFly:*:*) echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` exit ;; *:*VMS:*:*) - UNAME_MACHINE=`(uname -p) 2>/dev/null` + UNAME_MACHINE=`(uname -p) 2>/dev/null` case "${UNAME_MACHINE}" in A*) echo alpha-dec-vms ; exit ;; I*) echo ia64-dec-vms ; exit ;; @@ -1315,6 +1319,15 @@ EOF i*86:skyos:*:*) echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' exit ;; + i*86:rdos:*:*) + echo ${UNAME_MACHINE}-pc-rdos + exit ;; + i*86:AROS:*:*) + echo ${UNAME_MACHINE}-pc-aros + exit ;; + x86_64:VMkernel:*:*) + echo ${UNAME_MACHINE}-unknown-esx + exit ;; esac #echo '(No uname command or uname output not recognized.)' 1>&2 @@ -1337,11 +1350,11 @@ main () #include printf ("m68k-sony-newsos%s\n", #ifdef NEWSOS4 - "4" + "4" #else - "" + "" #endif - ); exit (0); + ); exit (0); #endif #endif @@ -1475,9 +1488,9 @@ This script, last modified $timestamp, h the operating system you are using. It is advised that you download the most up to date version of the config scripts from - http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.guess + http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD and - http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.sub + http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD If the version you run ($0) is already up to date, please send the following data and any information you think might be --- libcoyotl-3.1.0.orig/aclocal.m4 +++ libcoyotl-3.1.0/aclocal.m4 @@ -1,7 +1,7 @@ -# generated automatically by aclocal 1.9.6 -*- Autoconf -*- +# generated automatically by aclocal 1.11.1 -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, -# 2005 Free Software Foundation, Inc. +# 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -11,103 +11,208 @@ # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. +m4_ifndef([AC_AUTOCONF_VERSION], + [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.68],, +[m4_warning([this file was generated for autoconf 2.68. +You have another version of autoconf. It may work, but is not guaranteed to. +If you have problems, you may need to regenerate the build system entirely. +To do so, use the procedure documented by the package, typically `autoreconf'.])]) + # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- +# +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, +# 2006, 2007, 2008, 2009, 2010, 2011 Free Software +# Foundation, Inc. +# Written by Gordon Matzigkeit, 1996 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +m4_define([_LT_COPYING], [dnl +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, +# 2006, 2007, 2008, 2009, 2010, 2011 Free Software +# Foundation, Inc. +# Written by Gordon Matzigkeit, 1996 +# +# This file is part of GNU Libtool. +# +# GNU Libtool is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# As a special exception to the GNU General Public License, +# if you distribute this file as part of a program or library that +# is built using GNU Libtool, you may include this file under the +# same distribution terms that you use for the rest of that program. +# +# GNU Libtool is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Libtool; see the file COPYING. If not, a copy +# can be downloaded from http://www.gnu.org/licenses/gpl.html, or +# obtained by writing to the Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +]) -# serial 47 AC_PROG_LIBTOOL +# serial 57 LT_INIT -# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED) -# ----------------------------------------------------------- -# If this macro is not defined by Autoconf, define it here. -m4_ifdef([AC_PROVIDE_IFELSE], - [], - [m4_define([AC_PROVIDE_IFELSE], - [m4_ifdef([AC_PROVIDE_$1], - [$2], [$3])])]) +# LT_PREREQ(VERSION) +# ------------------ +# Complain and exit if this libtool version is less that VERSION. +m4_defun([LT_PREREQ], +[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1, + [m4_default([$3], + [m4_fatal([Libtool version $1 or higher is required], + 63)])], + [$2])]) -# AC_PROG_LIBTOOL -# --------------- -AC_DEFUN([AC_PROG_LIBTOOL], -[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl -dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX -dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX. - AC_PROVIDE_IFELSE([AC_PROG_CXX], - [AC_LIBTOOL_CXX], - [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX - ])]) -dnl And a similar setup for Fortran 77 support - AC_PROVIDE_IFELSE([AC_PROG_F77], - [AC_LIBTOOL_F77], - [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77 -])]) - -dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly. -dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run -dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both. - AC_PROVIDE_IFELSE([AC_PROG_GCJ], - [AC_LIBTOOL_GCJ], - [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], - [AC_LIBTOOL_GCJ], - [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ], - [AC_LIBTOOL_GCJ], - [ifdef([AC_PROG_GCJ], - [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])]) - ifdef([A][M_PROG_GCJ], - [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])]) - ifdef([LT_AC_PROG_GCJ], - [define([LT_AC_PROG_GCJ], - defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])]) -])])# AC_PROG_LIBTOOL +# _LT_CHECK_BUILDDIR +# ------------------ +# Complain if the absolute build directory name contains unusual characters +m4_defun([_LT_CHECK_BUILDDIR], +[case `pwd` in + *\ * | *\ *) + AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;; +esac +]) -# _AC_PROG_LIBTOOL -# ---------------- -AC_DEFUN([_AC_PROG_LIBTOOL], -[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl -AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl -AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl -AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl +# LT_INIT([OPTIONS]) +# ------------------ +AC_DEFUN([LT_INIT], +[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT +AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl +AC_BEFORE([$0], [LT_LANG])dnl +AC_BEFORE([$0], [LT_OUTPUT])dnl +AC_BEFORE([$0], [LTDL_INIT])dnl +m4_require([_LT_CHECK_BUILDDIR])dnl + +dnl Autoconf doesn't catch unexpanded LT_ macros by default: +m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl +m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl +dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4 +dnl unless we require an AC_DEFUNed macro: +AC_REQUIRE([LTOPTIONS_VERSION])dnl +AC_REQUIRE([LTSUGAR_VERSION])dnl +AC_REQUIRE([LTVERSION_VERSION])dnl +AC_REQUIRE([LTOBSOLETE_VERSION])dnl +m4_require([_LT_PROG_LTMAIN])dnl + +_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}]) + +dnl Parse OPTIONS +_LT_SET_OPTIONS([$0], [$1]) # This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" +LIBTOOL_DEPS="$ltmain" # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' AC_SUBST(LIBTOOL)dnl -# Prevent multiple expansion -define([AC_PROG_LIBTOOL], []) -])# _AC_PROG_LIBTOOL +_LT_SETUP +# Only expand once: +m4_define([LT_INIT]) +])# LT_INIT + +# Old names: +AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT]) +AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_PROG_LIBTOOL], []) +dnl AC_DEFUN([AM_PROG_LIBTOOL], []) -# AC_LIBTOOL_SETUP -# ---------------- -AC_DEFUN([AC_LIBTOOL_SETUP], -[AC_PREREQ(2.50)dnl -AC_REQUIRE([AC_ENABLE_SHARED])dnl -AC_REQUIRE([AC_ENABLE_STATIC])dnl -AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl -AC_REQUIRE([AC_CANONICAL_HOST])dnl + +# _LT_CC_BASENAME(CC) +# ------------------- +# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. +m4_defun([_LT_CC_BASENAME], +[for cc_temp in $1""; do + case $cc_temp in + compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; + distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` +]) + + +# _LT_FILEUTILS_DEFAULTS +# ---------------------- +# It is okay to use these file commands and assume they have been set +# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'. +m4_defun([_LT_FILEUTILS_DEFAULTS], +[: ${CP="cp -f"} +: ${MV="mv -f"} +: ${RM="rm -f"} +])# _LT_FILEUTILS_DEFAULTS + + +# _LT_SETUP +# --------- +m4_defun([_LT_SETUP], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_PROG_LD])dnl -AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl -AC_REQUIRE([AC_PROG_NM])dnl +AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl +AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl +_LT_DECL([], [PATH_SEPARATOR], [1], [The PATH separator for the build system])dnl +dnl +_LT_DECL([], [host_alias], [0], [The host system])dnl +_LT_DECL([], [host], [0])dnl +_LT_DECL([], [host_os], [0])dnl +dnl +_LT_DECL([], [build_alias], [0], [The build system])dnl +_LT_DECL([], [build], [0])dnl +_LT_DECL([], [build_os], [0])dnl +dnl +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([LT_PATH_LD])dnl +AC_REQUIRE([LT_PATH_NM])dnl +dnl AC_REQUIRE([AC_PROG_LN_S])dnl -AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl -# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! -AC_REQUIRE([AC_OBJEXT])dnl -AC_REQUIRE([AC_EXEEXT])dnl +test -z "$LN_S" && LN_S="ln -s" +_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl dnl +AC_REQUIRE([LT_CMD_MAX_LEN])dnl +_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl +_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl +dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_CHECK_SHELL_FEATURES])dnl +m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl +m4_require([_LT_CMD_RELOAD])dnl +m4_require([_LT_CHECK_MAGIC_METHOD])dnl +m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl +m4_require([_LT_CMD_OLD_ARCHIVE])dnl +m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl +m4_require([_LT_WITH_SYSROOT])dnl + +_LT_CONFIG_LIBTOOL_INIT([ +# See if we are running on zsh, and set the options which allow our +# commands through without removal of \ escapes INIT. +if test -n "\${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST +fi +]) +if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST +fi -AC_LIBTOOL_SYS_MAX_CMD_LEN -AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE -AC_LIBTOOL_OBJDIR +_LT_CHECK_OBJDIR -AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl -_LT_AC_PROG_ECHO_BACKSLASH +m4_require([_LT_TAG_COMPILER])dnl case $host_os in aix3*) @@ -121,6169 +226,8406 @@ aix3*) ;; esac -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed='sed -e 1s/^X//' -[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'] - -# Same as above, but do not quote variable references. -[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'] - -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' - -# Sed substitution to avoid accidental globbing in evaled expressions -no_glob_subst='s/\*/\\\*/g' - -# Constants: -rm="rm -f" - # Global variables: -default_ofile=libtool +ofile=libtool can_build_shared=yes # All known linkers require a `.a' archive for static linking (except MSVC, # which needs '.lib'). libext=a -ltmain="$ac_aux_dir/ltmain.sh" -ofile="$default_ofile" -with_gnu_ld="$lt_cv_prog_gnu_ld" -AC_CHECK_TOOL(AR, ar, false) -AC_CHECK_TOOL(RANLIB, ranlib, :) -AC_CHECK_TOOL(STRIP, strip, :) +with_gnu_ld="$lt_cv_prog_gnu_ld" old_CC="$CC" old_CFLAGS="$CFLAGS" # Set sane defaults for various variables -test -z "$AR" && AR=ar -test -z "$AR_FLAGS" && AR_FLAGS=cru -test -z "$AS" && AS=as test -z "$CC" && CC=cc test -z "$LTCC" && LTCC=$CC -test -z "$DLLTOOL" && DLLTOOL=dlltool +test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS test -z "$LD" && LD=ld -test -z "$LN_S" && LN_S="ln -s" -test -z "$MAGIC_CMD" && MAGIC_CMD=file -test -z "$NM" && NM=nm -test -z "$SED" && SED=sed -test -z "$OBJDUMP" && OBJDUMP=objdump -test -z "$RANLIB" && RANLIB=: -test -z "$STRIP" && STRIP=: test -z "$ac_objext" && ac_objext=o -# Determine commands to create old-style static archives. -old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' -old_postinstall_cmds='chmod 644 $oldlib' -old_postuninstall_cmds= - -if test -n "$RANLIB"; then - case $host_os in - openbsd*) - old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds" - ;; - *) - old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" - ;; - esac - old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" -fi - _LT_CC_BASENAME([$compiler]) # Only perform the check for file, if the check method requires it +test -z "$MAGIC_CMD" && MAGIC_CMD=file case $deplibs_check_method in file_magic*) if test "$file_magic_cmd" = '$MAGIC_CMD'; then - AC_PATH_MAGIC + _LT_PATH_MAGIC fi ;; esac -AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no) -AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], -enable_win32_dll=yes, enable_win32_dll=no) - -AC_ARG_ENABLE([libtool-lock], - [AC_HELP_STRING([--disable-libtool-lock], - [avoid locking (might break parallel builds)])]) -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes +# Use C for the default configuration in the libtool script +LT_SUPPORTED_TAG([CC]) +_LT_LANG_C_CONFIG +_LT_LANG_DEFAULT_CONFIG +_LT_CONFIG_COMMANDS +])# _LT_SETUP -AC_ARG_WITH([pic], - [AC_HELP_STRING([--with-pic], - [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], - [pic_mode="$withval"], - [pic_mode=default]) -test -z "$pic_mode" && pic_mode=default -# Check if we have a version mismatch between libtool.m4 and ltmain.sh. -# -# Note: This should be in AC_LIBTOOL_SETUP, _after_ $ltmain have been defined. -# We also should do it _before_ AC_LIBTOOL_LANG_C_CONFIG that actually -# calls AC_LIBTOOL_CONFIG and creates libtool. -# -_LT_VERSION_CHECK +# _LT_PREPARE_SED_QUOTE_VARS +# -------------------------- +# Define a few sed substitution that help us do robust quoting. +m4_defun([_LT_PREPARE_SED_QUOTE_VARS], +[# Backslashify metacharacters that are still active within +# double-quoted strings. +sed_quote_subst='s/\([["`$\\]]\)/\\\1/g' -# Use C for the default configuration in the libtool script -tagname= -AC_LIBTOOL_LANG_C_CONFIG -_LT_AC_TAGCONFIG -])# AC_LIBTOOL_SETUP +# Same as above, but do not quote variable references. +double_quote_subst='s/\([["`\\]]\)/\\\1/g' +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' -# _LT_VERSION_CHECK -# ----------------- -AC_DEFUN([_LT_VERSION_CHECK], -[AC_MSG_CHECKING([for correct ltmain.sh version]) -if test -z "$ltmain"; then - AC_MSG_RESULT(no) - echo - echo "*** [Gentoo] sanity check failed! ***" - echo "*** \$ltmain is not defined, please check the patch for consistency! ***" - echo - exit 1 -fi -gentoo_lt_version="1.5.20" -gentoo_ltmain_version=`grep '^[[:space:]]*VERSION=' $ltmain | sed -e 's|^[[:space:]]*VERSION=||'` -if test "$gentoo_lt_version" != "$gentoo_ltmain_version"; then - AC_MSG_RESULT(no) - echo - echo "*** [Gentoo] sanity check failed! ***" - echo "*** libtool.m4 and ltmain.sh have a version mismatch! ***" - echo "*** (libtool.m4 = $gentoo_lt_version, ltmain.sh = $gentoo_ltmain_version) ***" - echo - echo "Please run:" - echo - echo " libtoolize --copy --force" - echo - echo "if appropriate, please contact the maintainer of this" - echo "package (or your distribution) for help." - echo - exit 1 -else - AC_MSG_RESULT(yes) -fi -])# _LT_VERSION_CHECK +# Sed substitution to delay expansion of an escaped single quote. +delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' +# Sed substitution to avoid accidental globbing in evaled expressions +no_glob_subst='s/\*/\\\*/g' +]) -# _LT_AC_SYS_COMPILER -# ------------------- -AC_DEFUN([_LT_AC_SYS_COMPILER], -[AC_REQUIRE([AC_PROG_CC])dnl +# _LT_PROG_LTMAIN +# --------------- +# Note that this code is called both from `configure', and `config.status' +# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably, +# `config.status' has no value for ac_aux_dir unless we are using Automake, +# so we pass a copy along to make sure it has a sensible value anyway. +m4_defun([_LT_PROG_LTMAIN], +[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl +_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir']) +ltmain="$ac_aux_dir/ltmain.sh" +])# _LT_PROG_LTMAIN -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} -# Allow CC to be a program name with arguments. -compiler=$CC -])# _LT_AC_SYS_COMPILER +# So that we can recreate a full libtool script including additional +# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS +# in macros and then make a single call at the end using the `libtool' +# label. -# _LT_CC_BASENAME(CC) -# ------------------- -# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. -AC_DEFUN([_LT_CC_BASENAME], -[for cc_temp in $1""; do - case $cc_temp in - compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; - distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` + +# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS]) +# ---------------------------------------- +# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later. +m4_define([_LT_CONFIG_LIBTOOL_INIT], +[m4_ifval([$1], + [m4_append([_LT_OUTPUT_LIBTOOL_INIT], + [$1 +])])]) + +# Initialize. +m4_define([_LT_OUTPUT_LIBTOOL_INIT]) + + +# _LT_CONFIG_LIBTOOL([COMMANDS]) +# ------------------------------ +# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later. +m4_define([_LT_CONFIG_LIBTOOL], +[m4_ifval([$1], + [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS], + [$1 +])])]) + +# Initialize. +m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS]) + + +# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS]) +# ----------------------------------------------------- +m4_defun([_LT_CONFIG_SAVE_COMMANDS], +[_LT_CONFIG_LIBTOOL([$1]) +_LT_CONFIG_LIBTOOL_INIT([$2]) ]) -# _LT_COMPILER_BOILERPLATE -# ------------------------ -# Check for compiler boilerplate output or warnings with -# the simple compiler test code. -AC_DEFUN([_LT_COMPILER_BOILERPLATE], -[ac_outfile=conftest.$ac_objext -printf "$lt_simple_compile_test_code" >conftest.$ac_ext -eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d' >conftest.err -_lt_compiler_boilerplate=`cat conftest.err` -$rm conftest* -])# _LT_COMPILER_BOILERPLATE +# _LT_FORMAT_COMMENT([COMMENT]) +# ----------------------------- +# Add leading comment marks to the start of each line, and a trailing +# full-stop to the whole comment if one is not present already. +m4_define([_LT_FORMAT_COMMENT], +[m4_ifval([$1], [ +m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])], + [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.]) +)]) -# _LT_LINKER_BOILERPLATE -# ---------------------- -# Check for linker boilerplate output or warnings with -# the simple link test code. -AC_DEFUN([_LT_LINKER_BOILERPLATE], -[ac_outfile=conftest.$ac_objext -printf "$lt_simple_link_test_code" >conftest.$ac_ext -eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d' >conftest.err -_lt_linker_boilerplate=`cat conftest.err` -$rm conftest* -])# _LT_LINKER_BOILERPLATE -# _LT_AC_SYS_LIBPATH_AIX -# ---------------------- -# Links a minimal program and checks the executable -# for the system default hardcoded library path. In most cases, -# this is /usr/lib:/lib, but when the MPI compilers are used -# the location of the communication and MPI libs are included too. -# If we don't find anything, use the default library path according -# to the aix ld manual. -AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX], -[AC_LINK_IFELSE(AC_LANG_PROGRAM,[ -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'`; fi],[]) -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi -])# _LT_AC_SYS_LIBPATH_AIX +# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?]) +# ------------------------------------------------------------------- +# CONFIGNAME is the name given to the value in the libtool script. +# VARNAME is the (base) name used in the configure script. +# VALUE may be 0, 1 or 2 for a computed quote escaped value based on +# VARNAME. Any other value will be used directly. +m4_define([_LT_DECL], +[lt_if_append_uniq([lt_decl_varnames], [$2], [, ], + [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name], + [m4_ifval([$1], [$1], [$2])]) + lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3]) + m4_ifval([$4], + [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])]) + lt_dict_add_subkey([lt_decl_dict], [$2], + [tagged?], [m4_ifval([$5], [yes], [no])])]) +]) -# _LT_AC_SHELL_INIT(ARG) -# ---------------------- -AC_DEFUN([_LT_AC_SHELL_INIT], -[ifdef([AC_DIVERSION_NOTICE], - [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], - [AC_DIVERT_PUSH(NOTICE)]) -$1 -AC_DIVERT_POP -])# _LT_AC_SHELL_INIT +# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION]) +# -------------------------------------------------------- +m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])]) + + +# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...]) +# ------------------------------------------------ +m4_define([lt_decl_tag_varnames], +[_lt_decl_filter([tagged?], [yes], $@)]) + + +# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..]) +# --------------------------------------------------------- +m4_define([_lt_decl_filter], +[m4_case([$#], + [0], [m4_fatal([$0: too few arguments: $#])], + [1], [m4_fatal([$0: too few arguments: $#: $1])], + [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)], + [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)], + [lt_dict_filter([lt_decl_dict], $@)])[]dnl +]) -# _LT_AC_PROG_ECHO_BACKSLASH -# -------------------------- -# Add some code to the start of the generated configure script which -# will find an echo command which doesn't interpret backslashes. -AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH], -[_LT_AC_SHELL_INIT([ -# Check that we are running under the correct shell. -SHELL=${CONFIG_SHELL-/bin/sh} - -case X$ECHO in -X*--fallback-echo) - # Remove one level of quotation (which was required for Make). - ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` - ;; -esac -echo=${ECHO-echo} -if test "X[$]1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift -elif test "X[$]1" = X--fallback-echo; then - # Avoid inline document here, it may be left over - : -elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then - # Yippee, $echo works! - : -else - # Restart under the correct shell. - exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} -fi +# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...]) +# -------------------------------------------------- +m4_define([lt_decl_quote_varnames], +[_lt_decl_filter([value], [1], $@)]) + + +# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...]) +# --------------------------------------------------- +m4_define([lt_decl_dquote_varnames], +[_lt_decl_filter([value], [2], $@)]) + + +# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...]) +# --------------------------------------------------- +m4_define([lt_decl_varnames_tagged], +[m4_assert([$# <= 2])dnl +_$0(m4_quote(m4_default([$1], [[, ]])), + m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]), + m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))]) +m4_define([_lt_decl_varnames_tagged], +[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])]) + + +# lt_decl_all_varnames([SEPARATOR], [VARNAME1...]) +# ------------------------------------------------ +m4_define([lt_decl_all_varnames], +[_$0(m4_quote(m4_default([$1], [[, ]])), + m4_if([$2], [], + m4_quote(lt_decl_varnames), + m4_quote(m4_shift($@))))[]dnl +]) +m4_define([_lt_decl_all_varnames], +[lt_join($@, lt_decl_varnames_tagged([$1], + lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl +]) -if test "X[$]1" = X--fallback-echo; then - # used as fallback echo - shift - cat </dev/null 2>&1 && unset CDPATH +# _LT_CONFIG_STATUS_DECLARE([VARNAME]) +# ------------------------------------ +# Quote a variable value, and forward it to `config.status' so that its +# declaration there will have the same value as in `configure'. VARNAME +# must have a single quote delimited value for this to work. +m4_define([_LT_CONFIG_STATUS_DECLARE], +[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`']) -if test -z "$ECHO"; then -if test "X${echo_test_string+set}" != Xset; then -# find a string as large as possible, as long as the shell can cope with it - for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do - # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... - if (echo_test_string=`eval $cmd`) 2>/dev/null && - echo_test_string=`eval $cmd` && - (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null - then - break - fi - done -fi -if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - : -else - # The Solaris, AIX, and Digital Unix default echo programs unquote - # backslashes. This makes it impossible to quote backslashes using - # echo "$something" | sed 's/\\/\\\\/g' - # - # So, first we look for a working echo in the user's PATH. +# _LT_CONFIG_STATUS_DECLARATIONS +# ------------------------------ +# We delimit libtool config variables with single quotes, so when +# we write them to config.status, we have to be sure to quote all +# embedded single quotes properly. In configure, this macro expands +# each variable declared with _LT_DECL (and _LT_TAGDECL) into: +# +# ='`$ECHO "$" | $SED "$delay_single_quote_subst"`' +m4_defun([_LT_CONFIG_STATUS_DECLARATIONS], +[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames), + [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])]) - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for dir in $PATH /usr/ucb; do - IFS="$lt_save_ifs" - if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && - test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$dir/echo" - break - fi - done - IFS="$lt_save_ifs" - if test "X$echo" = Xecho; then - # We didn't find a better echo, so look for alternatives. - if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # This shell has a builtin print -r that does the trick. - echo='print -r' - elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && - test "X$CONFIG_SHELL" != X/bin/ksh; then - # If we have ksh, try running configure again with it. - ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} - export ORIGINAL_CONFIG_SHELL - CONFIG_SHELL=/bin/ksh - export CONFIG_SHELL - exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} - else - # Try using printf. - echo='printf %s\n' - if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # Cool, printf works - : - elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL - export CONFIG_SHELL - SHELL="$CONFIG_SHELL" - export SHELL - echo="$CONFIG_SHELL [$]0 --fallback-echo" - elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$CONFIG_SHELL [$]0 --fallback-echo" - else - # maybe with a smaller string... - prev=: +# _LT_LIBTOOL_TAGS +# ---------------- +# Output comment and list of tags supported by the script +m4_defun([_LT_LIBTOOL_TAGS], +[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl +available_tags="_LT_TAGS"dnl +]) - for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do - if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null - then - break - fi - prev="$cmd" - done - if test "$prev" != 'sed 50q "[$]0"'; then - echo_test_string=`eval $prev` - export echo_test_string - exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} - else - # Oops. We lost completely, so just stick with echo. - echo=echo - fi - fi - fi - fi -fi -fi +# _LT_LIBTOOL_DECLARE(VARNAME, [TAG]) +# ----------------------------------- +# Extract the dictionary values for VARNAME (optionally with TAG) and +# expand to a commented shell variable setting: +# +# # Some comment about what VAR is for. +# visible_name=$lt_internal_name +m4_define([_LT_LIBTOOL_DECLARE], +[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], + [description])))[]dnl +m4_pushdef([_libtool_name], + m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl +m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])), + [0], [_libtool_name=[$]$1], + [1], [_libtool_name=$lt_[]$1], + [2], [_libtool_name=$lt_[]$1], + [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl +m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl +]) -# Copy echo and quote the copy suitably for passing to libtool from -# the Makefile, instead of quoting the original, which is used later. -ECHO=$echo -if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then - ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" -fi -AC_SUBST(ECHO) -])])# _LT_AC_PROG_ECHO_BACKSLASH +# _LT_LIBTOOL_CONFIG_VARS +# ----------------------- +# Produce commented declarations of non-tagged libtool config variables +# suitable for insertion in the LIBTOOL CONFIG section of the `libtool' +# script. Tagged libtool config variables (even for the LIBTOOL CONFIG +# section) are produced by _LT_LIBTOOL_TAG_VARS. +m4_defun([_LT_LIBTOOL_CONFIG_VARS], +[m4_foreach([_lt_var], + m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)), + [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])]) + + +# _LT_LIBTOOL_TAG_VARS(TAG) +# ------------------------- +m4_define([_LT_LIBTOOL_TAG_VARS], +[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames), + [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])]) -# _LT_AC_LOCK -# ----------- -AC_DEFUN([_LT_AC_LOCK], -[AC_ARG_ENABLE([libtool-lock], - [AC_HELP_STRING([--disable-libtool-lock], - [avoid locking (might break parallel builds)])]) -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes +# _LT_TAGVAR(VARNAME, [TAGNAME]) +# ------------------------------ +m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])]) -# Some flags need to be propagated to the compiler or linker for good -# libtool support. -case $host in -ia64-*-hpux*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.$ac_objext` in - *ELF-32*) - HPUX_IA64_MODE="32" - ;; - *ELF-64*) - HPUX_IA64_MODE="64" - ;; - esac - fi - rm -rf conftest* - ;; -*-*-irix6*) - # Find out which ABI we are using. - echo '[#]line __oline__ "configure"' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - if test "$lt_cv_prog_gnu_ld" = yes; then - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -melf32bsmip" - ;; - *N32*) - LD="${LD-ld} -melf32bmipn32" + +# _LT_CONFIG_COMMANDS +# ------------------- +# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of +# variables for single and double quote escaping we saved from calls +# to _LT_DECL, we can put quote escaped variables declarations +# into `config.status', and then the shell code to quote escape them in +# for loops in `config.status'. Finally, any additional code accumulated +# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded. +m4_defun([_LT_CONFIG_COMMANDS], +[AC_PROVIDE_IFELSE([LT_OUTPUT], + dnl If the libtool generation code has been placed in $CONFIG_LT, + dnl instead of duplicating it all over again into config.status, + dnl then we will have config.status run $CONFIG_LT later, so it + dnl needs to know what name is stored there: + [AC_CONFIG_COMMANDS([libtool], + [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])], + dnl If the libtool generation code is destined for config.status, + dnl expand the accumulated commands and init code now: + [AC_CONFIG_COMMANDS([libtool], + [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])]) +])#_LT_CONFIG_COMMANDS + + +# Initialize. +m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT], +[ + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +sed_quote_subst='$sed_quote_subst' +double_quote_subst='$double_quote_subst' +delay_variable_subst='$delay_variable_subst' +_LT_CONFIG_STATUS_DECLARATIONS +LTCC='$LTCC' +LTCFLAGS='$LTCFLAGS' +compiler='$compiler_DEFAULT' + +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +\$[]1 +_LTECHO_EOF' +} + +# Quote evaled strings. +for var in lt_decl_all_varnames([[ \ +]], lt_decl_quote_varnames); do + case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + *[[\\\\\\\`\\"\\\$]]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ;; - *64-bit*) - LD="${LD-ld} -melf64bmip" + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ;; esac - else - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -32" - ;; - *N32*) - LD="${LD-ld} -n32" +done + +# Double-quote double-evaled strings. +for var in lt_decl_all_varnames([[ \ +]], lt_decl_dquote_varnames); do + case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + *[[\\\\\\\`\\"\\\$]]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ;; - *64-bit*) - LD="${LD-ld} -64" + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ;; esac - fi - fi - rm -rf conftest* - ;; +done -x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.o` in - *32-bit*) - case $host in - x86_64-*linux*) - LD="${LD-ld} -m elf_i386" - ;; - ppc64-*linux*|powerpc64-*linux*) - LD="${LD-ld} -m elf32ppclinux" - ;; - s390x-*linux*) - LD="${LD-ld} -m elf_s390" - ;; - sparc64-*linux*) - LD="${LD-ld} -m elf32_sparc" - ;; - esac - ;; - *64-bit*) - case $host in - x86_64-*linux*) - LD="${LD-ld} -m elf_x86_64" - ;; - ppc*-*linux*|powerpc*-*linux*) - LD="${LD-ld} -m elf64ppc" - ;; - s390*-*linux*) - LD="${LD-ld} -m elf64_s390" - ;; - sparc*-*linux*) - LD="${LD-ld} -m elf64_sparc" - ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; +_LT_OUTPUT_LIBTOOL_INIT +]) -*-*-linux*) - # Test if the compiler is 64bit - echo 'int i;' > conftest.$ac_ext - lt_cv_cc_64bit_output=no - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.$ac_objext` in - *"ELF 64"*) - lt_cv_cc_64bit_output=yes - ;; - esac - fi - rm -rf conftest* - ;; - -*-*-sco3.2v5*) - # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -belf" - AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, - [AC_LANG_PUSH(C) - AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) - AC_LANG_POP]) - if test x"$lt_cv_cc_needs_belf" != x"yes"; then - # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS="$SAVE_CFLAGS" - fi - ;; -AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], -[*-*-cygwin* | *-*-mingw* | *-*-pw32*) - AC_CHECK_TOOL(DLLTOOL, dlltool, false) - AC_CHECK_TOOL(AS, as, false) - AC_CHECK_TOOL(OBJDUMP, objdump, false) - ;; - ]) -esac +# _LT_GENERATED_FILE_INIT(FILE, [COMMENT]) +# ------------------------------------ +# Generate a child script FILE with all initialization necessary to +# reuse the environment learned by the parent script, and make the +# file executable. If COMMENT is supplied, it is inserted after the +# `#!' sequence but before initialization text begins. After this +# macro, additional text can be appended to FILE to form the body of +# the child script. The macro ends with non-zero status if the +# file could not be fully written (such as if the disk is full). +m4_ifdef([AS_INIT_GENERATED], +[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])], +[m4_defun([_LT_GENERATED_FILE_INIT], +[m4_require([AS_PREPARE])]dnl +[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl +[lt_write_fail=0 +cat >$1 <<_ASEOF || lt_write_fail=1 +#! $SHELL +# Generated by $as_me. +$2 +SHELL=\${CONFIG_SHELL-$SHELL} +export SHELL +_ASEOF +cat >>$1 <<\_ASEOF || lt_write_fail=1 +AS_SHELL_SANITIZE +_AS_PREPARE +exec AS_MESSAGE_FD>&1 +_ASEOF +test $lt_write_fail = 0 && chmod +x $1[]dnl +m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT + +# LT_OUTPUT +# --------- +# This macro allows early generation of the libtool script (before +# AC_OUTPUT is called), incase it is used in configure for compilation +# tests. +AC_DEFUN([LT_OUTPUT], +[: ${CONFIG_LT=./config.lt} +AC_MSG_NOTICE([creating $CONFIG_LT]) +_LT_GENERATED_FILE_INIT(["$CONFIG_LT"], +[# Run this file to recreate a libtool stub with the current configuration.]) + +cat >>"$CONFIG_LT" <<\_LTEOF +lt_cl_silent=false +exec AS_MESSAGE_LOG_FD>>config.log +{ + echo + AS_BOX([Running $as_me.]) +} >&AS_MESSAGE_LOG_FD -need_locks="$enable_libtool_lock" +lt_cl_help="\ +\`$as_me' creates a local libtool stub from the current configuration, +for use in further configure time tests before the real libtool is +generated. -])# _LT_AC_LOCK +Usage: $[0] [[OPTIONS]] + -h, --help print this help, then exit + -V, --version print version number, then exit + -q, --quiet do not print progress messages + -d, --debug don't remove temporary files -# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, -# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) -# ---------------------------------------------------------------- -# Check whether the given compiler option works -AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], -[AC_REQUIRE([LT_AC_PROG_SED]) -AC_CACHE_CHECK([$1], [$2], - [$2=no - ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) - printf "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="$3" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&AS_MESSAGE_LOG_FD - echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $echo "X$_lt_compiler_boilerplate" | $Xsed >conftest.exp - $SED '/^$/d' conftest.err >conftest.er2 - if test ! -s conftest.err || diff conftest.exp conftest.er2 >/dev/null; then - $2=yes - fi - fi - $rm conftest* -]) +Report bugs to ." -if test x"[$]$2" = xyes; then - ifelse([$5], , :, [$5]) -else - ifelse([$6], , :, [$6]) -fi -])# AC_LIBTOOL_COMPILER_OPTION +lt_cl_version="\ +m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl +m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION]) +configured by $[0], generated by m4_PACKAGE_STRING. +Copyright (C) 2011 Free Software Foundation, Inc. +This config.lt script is free software; the Free Software Foundation +gives unlimited permision to copy, distribute and modify it." -# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, -# [ACTION-SUCCESS], [ACTION-FAILURE]) -# ------------------------------------------------------------ -# Check whether the given compiler option works -AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], -[AC_CACHE_CHECK([$1], [$2], - [$2=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS $3" - printf "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The linker can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&AS_MESSAGE_LOG_FD - $echo "X$_lt_linker_boilerplate" | $Xsed > conftest.exp - $SED '/^$/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - $2=yes - fi - else - $2=yes - fi - fi - $rm conftest* - LDFLAGS="$save_LDFLAGS" -]) +while test $[#] != 0 +do + case $[1] in + --version | --v* | -V ) + echo "$lt_cl_version"; exit 0 ;; + --help | --h* | -h ) + echo "$lt_cl_help"; exit 0 ;; + --debug | --d* | -d ) + debug=: ;; + --quiet | --q* | --silent | --s* | -q ) + lt_cl_silent=: ;; -if test x"[$]$2" = xyes; then - ifelse([$4], , :, [$4]) -else - ifelse([$5], , :, [$5]) + -*) AC_MSG_ERROR([unrecognized option: $[1] +Try \`$[0] --help' for more information.]) ;; + + *) AC_MSG_ERROR([unrecognized argument: $[1] +Try \`$[0] --help' for more information.]) ;; + esac + shift +done + +if $lt_cl_silent; then + exec AS_MESSAGE_FD>/dev/null fi -])# AC_LIBTOOL_LINKER_OPTION +_LTEOF +cat >>"$CONFIG_LT" <<_LTEOF +_LT_OUTPUT_LIBTOOL_COMMANDS_INIT +_LTEOF + +cat >>"$CONFIG_LT" <<\_LTEOF +AC_MSG_NOTICE([creating $ofile]) +_LT_OUTPUT_LIBTOOL_COMMANDS +AS_EXIT(0) +_LTEOF +chmod +x "$CONFIG_LT" + +# configure is writing to config.log, but config.lt does its own redirection, +# appending to config.log, which fails on DOS, as config.log is still kept +# open by configure. Here we exec the FD to /dev/null, effectively closing +# config.log, so it can be properly (re)opened and appended to by config.lt. +lt_cl_success=: +test "$silent" = yes && + lt_config_lt_args="$lt_config_lt_args --quiet" +exec AS_MESSAGE_LOG_FD>/dev/null +$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false +exec AS_MESSAGE_LOG_FD>>config.log +$lt_cl_success || AS_EXIT(1) +])# LT_OUTPUT -# AC_LIBTOOL_SYS_MAX_CMD_LEN -# -------------------------- -AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], -[# find the maximum length of command line arguments -AC_MSG_CHECKING([the maximum length of command line arguments]) -AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl - i=0 - teststring="ABCD" - case $build_os in - msdosdjgpp*) - # On DJGPP, this test can blow up pretty badly due to problems in libc - # (any single argument exceeding 2000 bytes causes a buffer overrun - # during glob expansion). Even if it were fixed, the result of this - # check would be larger than it should be. - lt_cv_sys_max_cmd_len=12288; # 12K is about right - ;; +# _LT_CONFIG(TAG) +# --------------- +# If TAG is the built-in tag, create an initial libtool script with a +# default configuration from the untagged config vars. Otherwise add code +# to config.status for appending the configuration named by TAG from the +# matching tagged config vars. +m4_defun([_LT_CONFIG], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +_LT_CONFIG_SAVE_COMMANDS([ + m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl + m4_if(_LT_TAG, [C], [ + # See if we are running on zsh, and set the options which allow our + # commands through without removal of \ escapes. + if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST + fi - gnu*) - # Under GNU Hurd, this test is not required because there is - # no limit to the length of command line arguments. - # Libtool will interpret -1 as no limit whatsoever - lt_cv_sys_max_cmd_len=-1; - ;; + cfgfile="${ofile}T" + trap "$RM \"$cfgfile\"; exit 1" 1 2 15 + $RM "$cfgfile" - cygwin* | mingw*) - # On Win9x/ME, this test blows up -- it succeeds, but takes - # about 5 minutes as the teststring grows exponentially. - # Worse, since 9x/ME are not pre-emptively multitasking, - # you end up with a "frozen" computer, even though with patience - # the test eventually succeeds (with a max line length of 256k). - # Instead, let's just punt: use the minimum linelength reported by - # all of the supported platforms: 8192 (on NT/2K/XP). - lt_cv_sys_max_cmd_len=8192; - ;; + cat <<_LT_EOF >> "$cfgfile" +#! $SHELL - amigaos*) - # On AmigaOS with pdksh, this test takes hours, literally. - # So we just punt and use a minimum line length of 8192. - lt_cv_sys_max_cmd_len=8192; - ;; +# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +# NOTE: Changes made to this file will be lost: look at ltmain.sh. +# +_LT_COPYING +_LT_LIBTOOL_TAGS - netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) - # This has been around since 386BSD, at least. Likely further. - if test -x /sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` - elif test -x /usr/sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` - else - lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs - fi - # And add a safety zone - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - ;; - osf*) - # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure - # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not - # nice to cause kernel panics so lets avoid the loop below. - # First set a reasonable default. - lt_cv_sys_max_cmd_len=16384 - # - if test -x /sbin/sysconfig; then - case `/sbin/sysconfig -q proc exec_disable_arg_limit` in - *1*) lt_cv_sys_max_cmd_len=-1 ;; - esac - fi - ;; - *) - # If test is not a shell built-in, we'll probably end up computing a - # maximum length that is only half of the actual maximum length, but - # we can't tell. - SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} - while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \ - = "XX$teststring") >/dev/null 2>&1 && - new_result=`expr "X$teststring" : ".*" 2>&1` && - lt_cv_sys_max_cmd_len=$new_result && - test $i != 17 # 1/2 MB should be enough - do - i=`expr $i + 1` - teststring=$teststring$teststring - done - teststring= - # Add a significant safety factor because C++ compilers can tack on massive - # amounts of additional arguments before passing them to the linker. - # It appears as though 1/2 is a usable value. - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` +# ### BEGIN LIBTOOL CONFIG +_LT_LIBTOOL_CONFIG_VARS +_LT_LIBTOOL_TAG_VARS +# ### END LIBTOOL CONFIG + +_LT_EOF + + case $host_os in + aix3*) + cat <<\_LT_EOF >> "$cfgfile" +# AIX sometimes has problems with the GCC collect2 program. For some +# reason, if we set the COLLECT_NAMES environment variable, the problems +# vanish in a puff of smoke. +if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES +fi +_LT_EOF ;; esac -]) -if test -n $lt_cv_sys_max_cmd_len ; then - AC_MSG_RESULT($lt_cv_sys_max_cmd_len) -else - AC_MSG_RESULT(none) -fi -])# AC_LIBTOOL_SYS_MAX_CMD_LEN + _LT_PROG_LTMAIN -# _LT_AC_CHECK_DLFCN -# -------------------- -AC_DEFUN([_LT_AC_CHECK_DLFCN], -[AC_CHECK_HEADERS(dlfcn.h)dnl -])# _LT_AC_CHECK_DLFCN + # We use sed instead of cat because bash on DJGPP gets confused if + # if finds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? + sed '$q' "$ltmain" >> "$cfgfile" \ + || (rm -f "$cfgfile"; exit 1) + _LT_PROG_REPLACE_SHELLFNS -# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, -# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) -# ------------------------------------------------------------------ -AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF], -[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl -if test "$cross_compiling" = yes; then : - [$4] -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext <> "$ofile" -#if HAVE_DLFCN_H -#include -#endif +dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded +dnl in a comment (ie after a #). +# ### BEGIN LIBTOOL TAG CONFIG: $1 +_LT_LIBTOOL_TAG_VARS(_LT_TAG) +# ### END LIBTOOL TAG CONFIG: $1 +_LT_EOF +])dnl /m4_if +], +[m4_if([$1], [], [ + PACKAGE='$PACKAGE' + VERSION='$VERSION' + TIMESTAMP='$TIMESTAMP' + RM='$RM' + ofile='$ofile'], []) +])dnl /_LT_CONFIG_SAVE_COMMANDS +])# _LT_CONFIG -#include -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif +# LT_SUPPORTED_TAG(TAG) +# --------------------- +# Trace this macro to discover what tags are supported by the libtool +# --tag option, using: +# autoconf --trace 'LT_SUPPORTED_TAG:$1' +AC_DEFUN([LT_SUPPORTED_TAG], []) -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif -#ifdef __cplusplus -extern "C" void exit (int); -#endif +# C support is built-in for now +m4_define([_LT_LANG_C_enabled], []) +m4_define([_LT_TAGS], []) -void fnord() { int i=42;} -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - /* dlclose (self); */ - } +# LT_LANG(LANG) +# ------------- +# Enable libtool support for the given language if not already enabled. +AC_DEFUN([LT_LANG], +[AC_BEFORE([$0], [LT_OUTPUT])dnl +m4_case([$1], + [C], [_LT_LANG(C)], + [C++], [_LT_LANG(CXX)], + [Go], [_LT_LANG(GO)], + [Java], [_LT_LANG(GCJ)], + [Fortran 77], [_LT_LANG(F77)], + [Fortran], [_LT_LANG(FC)], + [Windows Resource], [_LT_LANG(RC)], + [m4_ifdef([_LT_LANG_]$1[_CONFIG], + [_LT_LANG($1)], + [m4_fatal([$0: unsupported language: "$1"])])])dnl +])# LT_LANG - exit (status); -}] -EOF - if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) $1 ;; - x$lt_dlneed_uscore) $2 ;; - x$lt_unknown|x*) $3 ;; - esac - else : - # compilation failed - $3 + +# _LT_LANG(LANGNAME) +# ------------------ +m4_defun([_LT_LANG], +[m4_ifdef([_LT_LANG_]$1[_enabled], [], + [LT_SUPPORTED_TAG([$1])dnl + m4_append([_LT_TAGS], [$1 ])dnl + m4_define([_LT_LANG_]$1[_enabled], [])dnl + _LT_LANG_$1_CONFIG($1)])dnl +])# _LT_LANG + + +m4_ifndef([AC_PROG_GO], [ +# NOTE: This macro has been submitted for inclusion into # +# GNU Autoconf as AC_PROG_GO. When it is available in # +# a released version of Autoconf we should remove this # +# macro and use it instead. # +m4_defun([AC_PROG_GO], +[AC_LANG_PUSH(Go)dnl +AC_ARG_VAR([GOC], [Go compiler command])dnl +AC_ARG_VAR([GOFLAGS], [Go compiler flags])dnl +_AC_ARG_VAR_LDFLAGS()dnl +AC_CHECK_TOOL(GOC, gccgo) +if test -z "$GOC"; then + if test -n "$ac_tool_prefix"; then + AC_CHECK_PROG(GOC, [${ac_tool_prefix}gccgo], [${ac_tool_prefix}gccgo]) fi fi -rm -fr conftest* -])# _LT_AC_TRY_DLOPEN_SELF +if test -z "$GOC"; then + AC_CHECK_PROG(GOC, gccgo, gccgo, false) +fi +])#m4_defun +])#m4_ifndef -# AC_LIBTOOL_DLOPEN_SELF -# ------------------- -AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], -[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl -if test "x$enable_dlopen" != xyes; then - enable_dlopen=unknown - enable_dlopen_self=unknown - enable_dlopen_self_static=unknown -else - lt_cv_dlopen=no - lt_cv_dlopen_libs= +# _LT_LANG_DEFAULT_CONFIG +# ----------------------- +m4_defun([_LT_LANG_DEFAULT_CONFIG], +[AC_PROVIDE_IFELSE([AC_PROG_CXX], + [LT_LANG(CXX)], + [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])]) + +AC_PROVIDE_IFELSE([AC_PROG_F77], + [LT_LANG(F77)], + [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])]) + +AC_PROVIDE_IFELSE([AC_PROG_FC], + [LT_LANG(FC)], + [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])]) + +dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal +dnl pulling things in needlessly. +AC_PROVIDE_IFELSE([AC_PROG_GCJ], + [LT_LANG(GCJ)], + [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], + [LT_LANG(GCJ)], + [AC_PROVIDE_IFELSE([LT_PROG_GCJ], + [LT_LANG(GCJ)], + [m4_ifdef([AC_PROG_GCJ], + [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])]) + m4_ifdef([A][M_PROG_GCJ], + [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])]) + m4_ifdef([LT_PROG_GCJ], + [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])]) + +AC_PROVIDE_IFELSE([AC_PROG_GO], + [LT_LANG(GO)], + [m4_define([AC_PROG_GO], defn([AC_PROG_GO])[LT_LANG(GO)])]) + +AC_PROVIDE_IFELSE([LT_PROG_RC], + [LT_LANG(RC)], + [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])]) +])# _LT_LANG_DEFAULT_CONFIG + +# Obsolete macros: +AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)]) +AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)]) +AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)]) +AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)]) +AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_CXX], []) +dnl AC_DEFUN([AC_LIBTOOL_F77], []) +dnl AC_DEFUN([AC_LIBTOOL_FC], []) +dnl AC_DEFUN([AC_LIBTOOL_GCJ], []) +dnl AC_DEFUN([AC_LIBTOOL_RC], []) - case $host_os in - beos*) - lt_cv_dlopen="load_add_on" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ;; - mingw* | pw32*) - lt_cv_dlopen="LoadLibrary" - lt_cv_dlopen_libs= - ;; +# _LT_TAG_COMPILER +# ---------------- +m4_defun([_LT_TAG_COMPILER], +[AC_REQUIRE([AC_PROG_CC])dnl - cygwin*) - lt_cv_dlopen="dlopen" - lt_cv_dlopen_libs= - ;; +_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl +_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl +_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl +_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl - darwin*) - # if libdl is installed we need to link against it - AC_CHECK_LIB([dl], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ - lt_cv_dlopen="dyld" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ]) - ;; +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} - *) - AC_CHECK_FUNC([shl_load], - [lt_cv_dlopen="shl_load"], - [AC_CHECK_LIB([dld], [shl_load], - [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"], - [AC_CHECK_FUNC([dlopen], - [lt_cv_dlopen="dlopen"], - [AC_CHECK_LIB([dl], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], - [AC_CHECK_LIB([svld], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], - [AC_CHECK_LIB([dld], [dld_link], - [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"]) - ]) - ]) - ]) - ]) - ]) - ;; - esac +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} - if test "x$lt_cv_dlopen" != xno; then - enable_dlopen=yes - else - enable_dlopen=no - fi +# Allow CC to be a program name with arguments. +compiler=$CC +])# _LT_TAG_COMPILER - case $lt_cv_dlopen in - dlopen) - save_CPPFLAGS="$CPPFLAGS" - test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - save_LDFLAGS="$LDFLAGS" - eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" +# _LT_COMPILER_BOILERPLATE +# ------------------------ +# Check for compiler boilerplate output or warnings with +# the simple compiler test code. +m4_defun([_LT_COMPILER_BOILERPLATE], +[m4_require([_LT_DECL_SED])dnl +ac_outfile=conftest.$ac_objext +echo "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$RM conftest* +])# _LT_COMPILER_BOILERPLATE - save_LIBS="$LIBS" - LIBS="$lt_cv_dlopen_libs $LIBS" - AC_CACHE_CHECK([whether a program can dlopen itself], - lt_cv_dlopen_self, [dnl - _LT_AC_TRY_DLOPEN_SELF( - lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, - lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) +# _LT_LINKER_BOILERPLATE +# ---------------------- +# Check for linker boilerplate output or warnings with +# the simple link test code. +m4_defun([_LT_LINKER_BOILERPLATE], +[m4_require([_LT_DECL_SED])dnl +ac_outfile=conftest.$ac_objext +echo "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$RM -r conftest* +])# _LT_LINKER_BOILERPLATE + +# _LT_REQUIRED_DARWIN_CHECKS +# ------------------------- +m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[ + case $host_os in + rhapsody* | darwin*) + AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:]) + AC_CHECK_TOOL([NMEDIT], [nmedit], [:]) + AC_CHECK_TOOL([LIPO], [lipo], [:]) + AC_CHECK_TOOL([OTOOL], [otool], [:]) + AC_CHECK_TOOL([OTOOL64], [otool64], [:]) + _LT_DECL([], [DSYMUTIL], [1], + [Tool to manipulate archived DWARF debug symbol files on Mac OS X]) + _LT_DECL([], [NMEDIT], [1], + [Tool to change global to local symbols on Mac OS X]) + _LT_DECL([], [LIPO], [1], + [Tool to manipulate fat objects and archives on Mac OS X]) + _LT_DECL([], [OTOOL], [1], + [ldd/readelf like tool for Mach-O binaries on Mac OS X]) + _LT_DECL([], [OTOOL64], [1], + [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4]) + + AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod], + [lt_cv_apple_cc_single_mod=no + if test -z "${LT_MULTI_MODULE}"; then + # By default we will add the -single_module flag. You can override + # by either setting the environment variable LT_MULTI_MODULE + # non-empty at configure time, or by adding -multi_module to the + # link flags. + rm -rf libconftest.dylib* + echo "int foo(void){return 1;}" > conftest.c + echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ +-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD + $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ + -dynamiclib -Wl,-single_module conftest.c 2>conftest.err + _lt_result=$? + # If there is a non-empty error log, and "single_module" + # appears in it, assume the flag caused a linker warning + if test -s conftest.err && $GREP single_module conftest.err; then + cat conftest.err >&AS_MESSAGE_LOG_FD + # Otherwise, if the output was created with a 0 exit code from + # the compiler, it worked. + elif test -f libconftest.dylib && test $_lt_result -eq 0; then + lt_cv_apple_cc_single_mod=yes + else + cat conftest.err >&AS_MESSAGE_LOG_FD + fi + rm -rf libconftest.dylib* + rm -f conftest.* + fi]) + + AC_CACHE_CHECK([for -exported_symbols_list linker flag], + [lt_cv_ld_exported_symbols_list], + [lt_cv_ld_exported_symbols_list=no + save_LDFLAGS=$LDFLAGS + echo "_main" > conftest.sym + LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" + AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], + [lt_cv_ld_exported_symbols_list=yes], + [lt_cv_ld_exported_symbols_list=no]) + LDFLAGS="$save_LDFLAGS" ]) - if test "x$lt_cv_dlopen_self" = xyes; then - LDFLAGS="$LDFLAGS $link_static_flag" - AC_CACHE_CHECK([whether a statically linked program can dlopen itself], - lt_cv_dlopen_self_static, [dnl - _LT_AC_TRY_DLOPEN_SELF( - lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, - lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) - ]) + AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load], + [lt_cv_ld_force_load=no + cat > conftest.c << _LT_EOF +int forced_loaded() { return 2;} +_LT_EOF + echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD + $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD + echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD + $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD + echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD + $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD + cat > conftest.c << _LT_EOF +int main() { return 0;} +_LT_EOF + echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD + $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err + _lt_result=$? + if test -s conftest.err && $GREP force_load conftest.err; then + cat conftest.err >&AS_MESSAGE_LOG_FD + elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then + lt_cv_ld_force_load=yes + else + cat conftest.err >&AS_MESSAGE_LOG_FD + fi + rm -f conftest.err libconftest.a conftest conftest.c + rm -rf conftest.dSYM + ]) + case $host_os in + rhapsody* | darwin1.[[012]]) + _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; + darwin1.*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + darwin*) # darwin 5.x on + # if running on 10.5 or later, the deployment target defaults + # to the OS version, if on x86, and 10.4, the deployment + # target defaults to 10.4. Don't you love it? + case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in + 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + 10.[[012]]*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + 10.*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + esac + ;; + esac + if test "$lt_cv_apple_cc_single_mod" = "yes"; then + _lt_dar_single_mod='$single_module' + fi + if test "$lt_cv_ld_exported_symbols_list" = "yes"; then + _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' + else + _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' + fi + if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then + _lt_dsymutil='~$DSYMUTIL $lib || :' + else + _lt_dsymutil= fi - - CPPFLAGS="$save_CPPFLAGS" - LDFLAGS="$save_LDFLAGS" - LIBS="$save_LIBS" ;; esac +]) - case $lt_cv_dlopen_self in - yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; - *) enable_dlopen_self=unknown ;; - esac - case $lt_cv_dlopen_self_static in - yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; - *) enable_dlopen_self_static=unknown ;; +# _LT_DARWIN_LINKER_FEATURES([TAG]) +# --------------------------------- +# Checks for linker and compiler features on darwin +m4_defun([_LT_DARWIN_LINKER_FEATURES], +[ + m4_require([_LT_REQUIRED_DARWIN_CHECKS]) + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_automatic, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + if test "$lt_cv_ld_force_load" = "yes"; then + _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' + m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes], + [FC], [_LT_TAGVAR(compiler_needs_object, $1)=yes]) + else + _LT_TAGVAR(whole_archive_flag_spec, $1)='' + fi + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined" + case $cc_basename in + ifort*) _lt_dar_can_shared=yes ;; + *) _lt_dar_can_shared=$GCC ;; esac -fi -])# AC_LIBTOOL_DLOPEN_SELF + if test "$_lt_dar_can_shared" = "yes"; then + output_verbose_link_cmd=func_echo_all + _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" + _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" + _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" + _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" + m4_if([$1], [CXX], +[ if test "$lt_cv_apple_cc_single_mod" != "yes"; then + _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" + _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" + fi +],[]) + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi +]) +# _LT_SYS_MODULE_PATH_AIX([TAGNAME]) +# ---------------------------------- +# Links a minimal program and checks the executable +# for the system default hardcoded library path. In most cases, +# this is /usr/lib:/lib, but when the MPI compilers are used +# the location of the communication and MPI libs are included too. +# If we don't find anything, use the default library path according +# to the aix ld manual. +# Store the results from the different compilers for each TAGNAME. +# Allow to override them for all tags through lt_cv_aix_libpath. +m4_defun([_LT_SYS_MODULE_PATH_AIX], +[m4_require([_LT_DECL_SED])dnl +if test "${lt_cv_aix_libpath+set}" = set; then + aix_libpath=$lt_cv_aix_libpath +else + AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])], + [AC_LINK_IFELSE([AC_LANG_PROGRAM],[ + lt_aix_libpath_sed='[ + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\([^ ]*\) *$/\1/ + p + } + }]' + _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. + if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then + _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi],[]) + if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then + _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib" + fi + ]) + aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1]) +fi +])# _LT_SYS_MODULE_PATH_AIX -# AC_LIBTOOL_PROG_CC_C_O([TAGNAME]) -# --------------------------------- -# Check to see if options -c and -o are simultaneously supported by compiler -AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O], -[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl -AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], - [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)], - [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no - $rm -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - printf "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&AS_MESSAGE_LOG_FD - echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $echo "X$_lt_compiler_boilerplate" | $Xsed > out/conftest.exp - $SED '/^$/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.err || diff out/conftest.exp out/conftest.er2 >/dev/null; then - _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes - fi - fi - chmod u+w . 2>&AS_MESSAGE_LOG_FD - $rm conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files - $rm out/* && rmdir out - cd .. - rmdir conftest - $rm conftest* -]) -])# AC_LIBTOOL_PROG_CC_C_O +# _LT_SHELL_INIT(ARG) +# ------------------- +m4_define([_LT_SHELL_INIT], +[m4_divert_text([M4SH-INIT], [$1 +])])# _LT_SHELL_INIT -# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME]) -# ----------------------------------------- -# Check to see if we can do hard links to lock some files if needed -AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], -[AC_REQUIRE([_LT_AC_LOCK])dnl -hard_links="nottested" -if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - AC_MSG_CHECKING([if we can lock with hard links]) - hard_links=yes - $rm conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - AC_MSG_RESULT([$hard_links]) - if test "$hard_links" = no; then - AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) - need_locks=warn - fi +# _LT_PROG_ECHO_BACKSLASH +# ----------------------- +# Find how we can fake an echo command that does not interpret backslash. +# In particular, with Autoconf 2.60 or later we add some code to the start +# of the generated configure script which will find a shell with a builtin +# printf (which we can use as an echo command). +m4_defun([_LT_PROG_ECHO_BACKSLASH], +[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO + +AC_MSG_CHECKING([how to print strings]) +# Test print first, because it will be a builtin if present. +if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ + test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='print -r --' +elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='printf %s\n' else - need_locks=no + # Use this function as a fallback that always works. + func_fallback_echo () + { + eval 'cat <<_LTECHO_EOF +$[]1 +_LTECHO_EOF' + } + ECHO='func_fallback_echo' fi -])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS +# func_echo_all arg... +# Invoke $ECHO with all args, space-separated. +func_echo_all () +{ + $ECHO "$*" +} -# AC_LIBTOOL_OBJDIR -# ----------------- -AC_DEFUN([AC_LIBTOOL_OBJDIR], -[AC_CACHE_CHECK([for objdir], [lt_cv_objdir], -[rm -f .libs 2>/dev/null -mkdir .libs 2>/dev/null -if test -d .libs; then - lt_cv_objdir=.libs -else - # MS-DOS does not allow filenames that begin with a dot. - lt_cv_objdir=_libs -fi -rmdir .libs 2>/dev/null]) -objdir=$lt_cv_objdir -])# AC_LIBTOOL_OBJDIR +case "$ECHO" in + printf*) AC_MSG_RESULT([printf]) ;; + print*) AC_MSG_RESULT([print -r]) ;; + *) AC_MSG_RESULT([cat]) ;; +esac +m4_ifdef([_AS_DETECT_SUGGESTED], +[_AS_DETECT_SUGGESTED([ + test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || ( + ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' + ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO + ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO + PATH=/empty FPATH=/empty; export PATH FPATH + test "X`printf %s $ECHO`" = "X$ECHO" \ + || test "X`print -r -- $ECHO`" = "X$ECHO" )])]) + +_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts]) +_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes]) +])# _LT_PROG_ECHO_BACKSLASH -# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME]) -# ---------------------------------------------- -# Check hardcoding attributes. -AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], -[AC_MSG_CHECKING([how to hardcode library paths into programs]) -_LT_AC_TAGVAR(hardcode_action, $1)= -if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \ - test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \ - test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then - # We can hardcode non-existant directories. - if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no && - test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then - # Linking always hardcodes the temporary library directory. - _LT_AC_TAGVAR(hardcode_action, $1)=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - _LT_AC_TAGVAR(hardcode_action, $1)=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - _LT_AC_TAGVAR(hardcode_action, $1)=unsupported -fi -AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)]) +# _LT_WITH_SYSROOT +# ---------------- +AC_DEFUN([_LT_WITH_SYSROOT], +[AC_MSG_CHECKING([for sysroot]) +AC_ARG_WITH([sysroot], +[ --with-sysroot[=DIR] Search for dependent libraries within DIR + (or the compiler's sysroot if not specified).], +[], [with_sysroot=no]) + +dnl lt_sysroot will always be passed unquoted. We quote it here +dnl in case the user passed a directory name. +lt_sysroot= +case ${with_sysroot} in #( + yes) + if test "$GCC" = yes; then + lt_sysroot=`$CC --print-sysroot 2>/dev/null` + fi + ;; #( + /*) + lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` + ;; #( + no|'') + ;; #( + *) + AC_MSG_RESULT([${with_sysroot}]) + AC_MSG_ERROR([The sysroot must be an absolute path.]) + ;; +esac -if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then - # Fast installation is not supported - enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then - # Fast installation is not necessary - enable_fast_install=needless -fi -])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH + AC_MSG_RESULT([${lt_sysroot:-no}]) +_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl +[dependent libraries, and in which our libraries should be installed.])]) +# _LT_ENABLE_LOCK +# --------------- +m4_defun([_LT_ENABLE_LOCK], +[AC_ARG_ENABLE([libtool-lock], + [AS_HELP_STRING([--disable-libtool-lock], + [avoid locking (might break parallel builds)])]) +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes -# AC_LIBTOOL_SYS_LIB_STRIP -# ------------------------ -AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP], -[striplib= -old_striplib= -AC_MSG_CHECKING([whether stripping libraries is possible]) -if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" - AC_MSG_RESULT([yes]) -else -# FIXME - insert some real tests, host_os isn't really good enough - case $host_os in - darwin*) - if test -n "$STRIP" ; then - striplib="$STRIP -x" - AC_MSG_RESULT([yes]) - else - AC_MSG_RESULT([no]) -fi - ;; - *) - AC_MSG_RESULT([no]) - ;; - esac -fi -])# AC_LIBTOOL_SYS_LIB_STRIP - - -# AC_LIBTOOL_SYS_DYNAMIC_LINKER -# ----------------------------- -# PORTME Fill in your ld.so characteristics -AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER], -[AC_MSG_CHECKING([dynamic linker characteristics]) -library_names_spec= -libname_spec='lib$name' -soname_spec= -shrext_cmds=".so" -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -if test "$GCC" = yes; then - sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` - if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then - # if the path contains ";" then we assume it to be the separator - # otherwise default to the standard path separator (i.e. ":") - it is - # assumed that no part of a normal pathname contains ";" but that should - # okay in the real world where ";" in dirpaths is itself problematic. - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` +# Some flags need to be propagated to the compiler or linker for good +# libtool support. +case $host in +ia64-*-hpux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.$ac_objext` in + *ELF-32*) + HPUX_IA64_MODE="32" + ;; + *ELF-64*) + HPUX_IA64_MODE="64" + ;; + esac fi -else - sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" -fi -need_lib_prefix=unknown -hardcode_into_libs=no - -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -need_version=unknown - -case $host_os in -aix3*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' - shlibpath_var=LIBPATH - - # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}${shared_ext}$major' + rm -rf conftest* ;; - -aix4* | aix5*) - version_type=linux - need_lib_prefix=no - need_version=no - hardcode_into_libs=yes - if test "$host_cpu" = ia64; then - # AIX 5 supports IA64 - library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[[01]] | aix4.[[01]].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # AIX (on Power*) has no versioning support, so currently we can not hardcode correct - # soname into executable. Probably we can add versioning support to - # collect2, so additional links can be useful in future. - if test "$aix_use_runtimelinking" = yes; then - # If using run time linking (on AIX 4.2 or later) use lib.so - # instead of lib.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +*-*-irix6*) + # Find out which ABI we are using. + echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + if test "$lt_cv_prog_gnu_ld" = yes; then + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -melf32bsmip" + ;; + *N32*) + LD="${LD-ld} -melf32bmipn32" + ;; + *64-bit*) + LD="${LD-ld} -melf64bmip" + ;; + esac else - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}${shared_ext}$major' + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -32" + ;; + *N32*) + LD="${LD-ld} -n32" + ;; + *64-bit*) + LD="${LD-ld} -64" + ;; + esac fi - shlibpath_var=LIBPATH fi + rm -rf conftest* ;; -amigaos*) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' +x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ +s390*-*linux*|s390*-*tpf*|sparc*-*linux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.o` in + *32-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_i386_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_i386" + ;; + ppc64-*linux*|powerpc64-*linux*) + LD="${LD-ld} -m elf32ppclinux" + ;; + s390x-*linux*) + LD="${LD-ld} -m elf_s390" + ;; + sparc64-*linux*) + LD="${LD-ld} -m elf32_sparc" + ;; + esac + ;; + *64-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_x86_64_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_x86_64" + ;; + ppc*-*linux*|powerpc*-*linux*) + LD="${LD-ld} -m elf64ppc" + ;; + s390*-*linux*|s390*-*tpf*) + LD="${LD-ld} -m elf64_s390" + ;; + sparc*-*linux*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + ;; + esac + fi + rm -rf conftest* ;; -beos*) - library_names_spec='${libname}${shared_ext}' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH +*-*-sco3.2v5*) + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -belf" + AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, + [AC_LANG_PUSH(C) + AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) + AC_LANG_POP]) + if test x"$lt_cv_cc_needs_belf" != x"yes"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS="$SAVE_CFLAGS" + fi ;; - -bsdi[[45]]*) - version_type=linux - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs +*-*solaris*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.o` in + *64-bit*) + case $lt_cv_prog_gnu_ld in + yes*) + case $host in + i?86-*-solaris*) + LD="${LD-ld} -m elf_x86_64" + ;; + sparc*-*-solaris*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + # GNU ld 2.21 introduced _sol2 emulations. Use them if available. + if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then + LD="${LD-ld}_sol2" + fi + ;; + *) + if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then + LD="${LD-ld} -64" + fi + ;; + esac + ;; + esac + fi + rm -rf conftest* ;; +esac -cygwin* | mingw* | pw32*) - version_type=windows - shrext_cmds=".dll" - need_version=no - need_lib_prefix=no +need_locks="$enable_libtool_lock" +])# _LT_ENABLE_LOCK - case $GCC,$host_os in - yes,cygwin* | yes,mingw* | yes,pw32*) - library_names_spec='$libname.dll.a' - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname~ - chmod a+x \$dldir/$dlname' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $rm \$dlpath' - shlibpath_overrides_runpath=yes - case $host_os in - cygwin*) - # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" - ;; - mingw*) - # MinGW DLLs use traditional 'lib' prefix - soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` - if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then - # It is most probably a Windows format PATH printed by - # mingw gcc, but we are running on Cygwin. Gcc prints its search - # path with ; separators, and with drive letters. We can handle the - # drive letters (cygwin fileutils understands them), so leave them, - # especially as we might pass files found there to a mingw objdump, - # which wouldn't understand a cygwinified path. Ahh. - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` +# _LT_PROG_AR +# ----------- +m4_defun([_LT_PROG_AR], +[AC_CHECK_TOOLS(AR, [ar], false) +: ${AR=ar} +: ${AR_FLAGS=cru} +_LT_DECL([], [AR], [1], [The archiver]) +_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive]) + +AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file], + [lt_cv_ar_at_file=no + AC_COMPILE_IFELSE([AC_LANG_PROGRAM], + [echo conftest.$ac_objext > conftest.lst + lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD' + AC_TRY_EVAL([lt_ar_try]) + if test "$ac_status" -eq 0; then + # Ensure the archiver fails upon bogus file names. + rm -f conftest.$ac_objext libconftest.a + AC_TRY_EVAL([lt_ar_try]) + if test "$ac_status" -ne 0; then + lt_cv_ar_at_file=@ + fi fi - ;; - pw32*) - # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' - ;; - esac - ;; + rm -f conftest.* libconftest.a + ]) + ]) - linux*) - if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - supports_anon_versioning=no - case `$LD -v 2>/dev/null` in - *\ [01].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 - *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... - *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... - *\ 2.11.*) ;; # other 2.11 versions - *) supports_anon_versioning=yes ;; - esac - if test $supports_anon_versioning = yes; then - archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~ -cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ -$echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' - else - $archive_expsym_cmds="$archive_cmds" - fi - else - ld_shlibs=no - fi - ;; +if test "x$lt_cv_ar_at_file" = xno; then + archiver_list_spec= +else + archiver_list_spec=$lt_cv_ar_at_file +fi +_LT_DECL([], [archiver_list_spec], [1], + [How to feed a file listing to the archiver]) +])# _LT_PROG_AR + + +# _LT_CMD_OLD_ARCHIVE +# ------------------- +m4_defun([_LT_CMD_OLD_ARCHIVE], +[_LT_PROG_AR + +AC_CHECK_TOOL(STRIP, strip, :) +test -z "$STRIP" && STRIP=: +_LT_DECL([], [STRIP], [1], [A symbol stripping program]) + +AC_CHECK_TOOL(RANLIB, ranlib, :) +test -z "$RANLIB" && RANLIB=: +_LT_DECL([], [RANLIB], [1], + [Commands used to install an old-style archive]) + +# Determine commands to create old-style static archives. +old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= +if test -n "$RANLIB"; then + case $host_os in + openbsd*) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" + ;; *) - library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib" ;; esac - dynamic_linker='Win32 ld.exe' - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; + old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib" +fi -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' - soname_spec='${libname}${release}${major}$shared_ext' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' - # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. - if test "$GCC" = yes; then - sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` - else - sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' - fi - sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' - ;; +case $host_os in + darwin*) + lock_old_archive_extraction=yes ;; + *) + lock_old_archive_extraction=no ;; +esac +_LT_DECL([], [old_postinstall_cmds], [2]) +_LT_DECL([], [old_postuninstall_cmds], [2]) +_LT_TAGDECL([], [old_archive_cmds], [2], + [Commands used to build an old-style archive]) +_LT_DECL([], [lock_old_archive_extraction], [0], + [Whether to use a lock for old archive extraction]) +])# _LT_CMD_OLD_ARCHIVE -dgux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; -freebsd1*) - dynamic_linker=no - ;; +# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) +# ---------------------------------------------------------------- +# Check whether the given compiler option works +AC_DEFUN([_LT_COMPILER_OPTION], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_SED])dnl +AC_CACHE_CHECK([$1], [$2], + [$2=no + m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$3" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&AS_MESSAGE_LOG_FD + echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + $2=yes + fi + fi + $RM conftest* +]) -kfreebsd*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='GNU ld.so' - ;; +if test x"[$]$2" = xyes; then + m4_if([$5], , :, [$5]) +else + m4_if([$6], , :, [$6]) +fi +])# _LT_COMPILER_OPTION -freebsd* | dragonfly*) - # DragonFly does not have aout. When/if they implement a new - # versioning mechanism, adjust this. - if test -x /usr/bin/objformat; then - objformat=`/usr/bin/objformat` - else - case $host_os in - freebsd[[123]]*) objformat=aout ;; - *) objformat=elf ;; - esac - fi - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in - freebsd2*) - shlibpath_overrides_runpath=yes +# Old name: +AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], []) + + +# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +# [ACTION-SUCCESS], [ACTION-FAILURE]) +# ---------------------------------------------------- +# Check whether the given linker option works +AC_DEFUN([_LT_LINKER_OPTION], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_SED])dnl +AC_CACHE_CHECK([$1], [$2], + [$2=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $3" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&AS_MESSAGE_LOG_FD + $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + $2=yes + fi + else + $2=yes + fi + fi + $RM -r conftest* + LDFLAGS="$save_LDFLAGS" +]) + +if test x"[$]$2" = xyes; then + m4_if([$4], , :, [$4]) +else + m4_if([$5], , :, [$5]) +fi +])# _LT_LINKER_OPTION + +# Old name: +AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], []) + + +# LT_CMD_MAX_LEN +#--------------- +AC_DEFUN([LT_CMD_MAX_LEN], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +# find the maximum length of command line arguments +AC_MSG_CHECKING([the maximum length of command line arguments]) +AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl + i=0 + teststring="ABCD" + + case $build_os in + msdosdjgpp*) + # On DJGPP, this test can blow up pretty badly due to problems in libc + # (any single argument exceeding 2000 bytes causes a buffer overrun + # during glob expansion). Even if it were fixed, the result of this + # check would be larger than it should be. + lt_cv_sys_max_cmd_len=12288; # 12K is about right ;; - freebsd3.[[01]]* | freebsdelf3.[[01]]*) - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes + + gnu*) + # Under GNU Hurd, this test is not required because there is + # no limit to the length of command line arguments. + # Libtool will interpret -1 as no limit whatsoever + lt_cv_sys_max_cmd_len=-1; ;; - *) # from 3.2 on - shlibpath_overrides_runpath=no - hardcode_into_libs=yes + + cygwin* | mingw* | cegcc*) + # On Win9x/ME, this test blows up -- it succeeds, but takes + # about 5 minutes as the teststring grows exponentially. + # Worse, since 9x/ME are not pre-emptively multitasking, + # you end up with a "frozen" computer, even though with patience + # the test eventually succeeds (with a max line length of 256k). + # Instead, let's just punt: use the minimum linelength reported by + # all of the supported platforms: 8192 (on NT/2K/XP). + lt_cv_sys_max_cmd_len=8192; ;; - esac - ;; -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; + mint*) + # On MiNT this can take a long time and run out of memory. + lt_cv_sys_max_cmd_len=8192; + ;; -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - version_type=sunos - need_lib_prefix=no - need_version=no - case $host_cpu in - ia64*) - shrext_cmds='.so' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.so" - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - if test "X$HPUX_IA64_MODE" = X32; then - sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + amigaos*) + # On AmigaOS with pdksh, this test takes hours, literally. + # So we just punt and use a minimum line length of 8192. + lt_cv_sys_max_cmd_len=8192; + ;; + + netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) + # This has been around since 386BSD, at least. Likely further. + if test -x /sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` + elif test -x /usr/sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` else - sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs fi - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + # And add a safety zone + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ;; - hppa*64*) - shrext_cmds='.sl' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.sl" - shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - *) - shrext_cmds='.sl' - dynamic_linker="$host_os dld.sl" - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' + + interix*) + # We know the value 262144 and hardcode it with a safety zone (like BSD) + lt_cv_sys_max_cmd_len=196608 ;; - esac - # HP-UX runs *really* slowly unless shared libraries are mode 555. - postinstall_cmds='chmod 555 $lib' - ;; -irix5* | irix6* | nonstopux*) - case $host_os in - nonstopux*) version_type=nonstopux ;; - *) - if test "$lt_cv_prog_gnu_ld" = yes; then - version_type=linux - else - version_type=irix - fi ;; - esac - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' - case $host_os in - irix5* | nonstopux*) - libsuff= shlibsuff= + os2*) + # The test takes a long time on OS/2. + lt_cv_sys_max_cmd_len=8192 + ;; + + osf*) + # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure + # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not + # nice to cause kernel panics so lets avoid the loop below. + # First set a reasonable default. + lt_cv_sys_max_cmd_len=16384 + # + if test -x /sbin/sysconfig; then + case `/sbin/sysconfig -q proc exec_disable_arg_limit` in + *1*) lt_cv_sys_max_cmd_len=-1 ;; + esac + fi + ;; + sco3.2v5*) + lt_cv_sys_max_cmd_len=102400 + ;; + sysv5* | sco5v6* | sysv4.2uw2*) + kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` + if test -n "$kargmax"; then + lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` + else + lt_cv_sys_max_cmd_len=32768 + fi ;; *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") - libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") - libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") - libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac + lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` + if test -n "$lt_cv_sys_max_cmd_len"; then + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + else + # Make teststring a little bigger before we do anything with it. + # a 1K string should be a reasonable start. + for i in 1 2 3 4 5 6 7 8 ; do + teststring=$teststring$teststring + done + SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} + # If test is not a shell built-in, we'll probably end up computing a + # maximum length that is only half of the actual maximum length, but + # we can't tell. + while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \ + = "X$teststring$teststring"; } >/dev/null 2>&1 && + test $i != 17 # 1/2 MB should be enough + do + i=`expr $i + 1` + teststring=$teststring$teststring + done + # Only check the string length outside the loop. + lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` + teststring= + # Add a significant safety factor because C++ compilers can tack on + # massive amounts of additional arguments before passing them to the + # linker. It appears as though 1/2 is a usable value. + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` + fi ;; esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" - hardcode_into_libs=yes - ;; +]) +if test -n $lt_cv_sys_max_cmd_len ; then + AC_MSG_RESULT($lt_cv_sys_max_cmd_len) +else + AC_MSG_RESULT(none) +fi +max_cmd_len=$lt_cv_sys_max_cmd_len +_LT_DECL([], [max_cmd_len], [0], + [What is the maximum length of a command?]) +])# LT_CMD_MAX_LEN -# No shared lib support for Linux oldld, aout, or coff. -linux*oldld* | linux*aout* | linux*coff*) - dynamic_linker=no - ;; +# Old name: +AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], []) -# This must be Linux ELF. -linux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - # Append ld.so.conf contents to the search path - if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` - sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" - fi +# _LT_HEADER_DLFCN +# ---------------- +m4_defun([_LT_HEADER_DLFCN], +[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl +])# _LT_HEADER_DLFCN - case $host_cpu:$lt_cv_cc_64bit_output in - powerpc64:yes | s390x:yes | sparc64:yes | x86_64:yes) - sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /usr/X11R6/lib64" - sys_lib_search_path_spec="/lib64 /usr/lib64 /usr/local/lib64 /usr/X11R6/lib64" - ;; - esac - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' +# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, +# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) +# ---------------------------------------------------------------- +m4_defun([_LT_TRY_DLOPEN_SELF], +[m4_require([_LT_HEADER_DLFCN])dnl +if test "$cross_compiling" = yes; then : + [$4] +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +[#line $LINENO "configure" +#include "confdefs.h" - # Find out which ABI we are using (multilib Linux x86_64 hack). - libsuff= - case "$host_cpu" in - x86_64*) - echo '[#]line __oline__ "configure"' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.$ac_objext` in - *64-bit*) - libsuff=64 - ;; - esac - fi - rm -rf conftest* - ;; - *) - ;; - esac - sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}" - sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" - ;; +#if HAVE_DLFCN_H +#include +#endif -knetbsd*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='GNU ld.so' - ;; +#include -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +/* When -fvisbility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ +#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +int fnord () __attribute__((visibility("default"))); +#endif + +int fnord () { return 42; } +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else + { + if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + else puts (dlerror ()); + } + /* dlclose (self); */ + } else - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='NetBSD ld.elf_so' + puts (dlerror ()); + + return status; +}] +_LT_EOF + if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) $1 ;; + x$lt_dlneed_uscore) $2 ;; + x$lt_dlunknown|x*) $3 ;; + esac + else : + # compilation failed + $3 fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; +fi +rm -fr conftest* +])# _LT_TRY_DLOPEN_SELF -newsos6) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; -nto-qnx*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; +# LT_SYS_DLOPEN_SELF +# ------------------ +AC_DEFUN([LT_SYS_DLOPEN_SELF], +[m4_require([_LT_HEADER_DLFCN])dnl +if test "x$enable_dlopen" != xyes; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown +else + lt_cv_dlopen=no + lt_cv_dlopen_libs= -openbsd*) - version_type=sunos - need_lib_prefix=no - # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. case $host_os in - openbsd3.3 | openbsd3.3.*) need_version=yes ;; - *) need_version=no ;; + beos*) + lt_cv_dlopen="load_add_on" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ;; + + mingw* | pw32* | cegcc*) + lt_cv_dlopen="LoadLibrary" + lt_cv_dlopen_libs= + ;; + + cygwin*) + lt_cv_dlopen="dlopen" + lt_cv_dlopen_libs= + ;; + + darwin*) + # if libdl is installed we need to link against it + AC_CHECK_LIB([dl], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ + lt_cv_dlopen="dyld" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ]) + ;; + + *) + AC_CHECK_FUNC([shl_load], + [lt_cv_dlopen="shl_load"], + [AC_CHECK_LIB([dld], [shl_load], + [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"], + [AC_CHECK_FUNC([dlopen], + [lt_cv_dlopen="dlopen"], + [AC_CHECK_LIB([dl], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], + [AC_CHECK_LIB([svld], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], + [AC_CHECK_LIB([dld], [dld_link], + [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"]) + ]) + ]) + ]) + ]) + ]) + ;; esac - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case $host_os in - openbsd2.[[89]] | openbsd2.[[89]].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac + + if test "x$lt_cv_dlopen" != xno; then + enable_dlopen=yes else - shlibpath_overrides_runpath=yes + enable_dlopen=no fi - ;; -os2*) - libname_spec='$name' - shrext_cmds=".dll" - need_lib_prefix=no - library_names_spec='$libname${shared_ext} $libname.a' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH - ;; + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS="$CPPFLAGS" + test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" -osf3* | osf4* | osf5*) - version_type=osf - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" - ;; + save_LDFLAGS="$LDFLAGS" + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" -sco3.2v5*) - version_type=osf - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - ;; + save_LIBS="$LIBS" + LIBS="$lt_cv_dlopen_libs $LIBS" -solaris*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; + AC_CACHE_CHECK([whether a program can dlopen itself], + lt_cv_dlopen_self, [dnl + _LT_TRY_DLOPEN_SELF( + lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, + lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) + ]) -sunos4*) - version_type=sunos - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no - fi - need_version=yes - ;; + if test "x$lt_cv_dlopen_self" = xyes; then + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" + AC_CACHE_CHECK([whether a statically linked program can dlopen itself], + lt_cv_dlopen_self_static, [dnl + _LT_TRY_DLOPEN_SELF( + lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, + lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) + ]) + fi -sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - need_lib_prefix=no - export_dynamic_flag_spec='${wl}-Blargedynsym' - runpath_var=LD_RUN_PATH - ;; - siemens) - need_lib_prefix=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; + CPPFLAGS="$save_CPPFLAGS" + LDFLAGS="$save_LDFLAGS" + LIBS="$save_LIBS" + ;; esac - ;; - -sysv4*MP*) - if test -d /usr/nec ;then - version_type=linux - library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' - soname_spec='$libname${shared_ext}.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; - -uts4*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -*) - dynamic_linker=no - ;; -esac -AC_MSG_RESULT([$dynamic_linker]) -test "$dynamic_linker" = no && can_build_shared=no -])# AC_LIBTOOL_SYS_DYNAMIC_LINKER + case $lt_cv_dlopen_self in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac -# _LT_AC_TAGCONFIG -# ---------------- -AC_DEFUN([_LT_AC_TAGCONFIG], -[AC_ARG_WITH([tags], - [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@], - [include additional configurations @<:@automatic@:>@])], - [tagnames="$withval"]) - -if test -f "$ltmain" && test -n "$tagnames"; then - if test ! -f "${ofile}"; then - AC_MSG_WARN([output file `$ofile' does not exist]) - fi + case $lt_cv_dlopen_self_static in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac +fi +_LT_DECL([dlopen_support], [enable_dlopen], [0], + [Whether dlopen is supported]) +_LT_DECL([dlopen_self], [enable_dlopen_self], [0], + [Whether dlopen of programs is supported]) +_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0], + [Whether dlopen of statically linked programs is supported]) +])# LT_SYS_DLOPEN_SELF + +# Old name: +AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], []) - if test -z "$LTCC"; then - eval "`$SHELL ${ofile} --config | grep '^LTCC='`" - if test -z "$LTCC"; then - AC_MSG_WARN([output file `$ofile' does not look like a libtool script]) - else - AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile']) - fi - fi - # Extract list of available tagged configurations in $ofile. - # Note that this assumes the entire list is on one line. - available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'` +# _LT_COMPILER_C_O([TAGNAME]) +# --------------------------- +# Check to see if options -c and -o are simultaneously supported by compiler. +# This macro does not hard code the compiler like AC_PROG_CC_C_O. +m4_defun([_LT_COMPILER_C_O], +[m4_require([_LT_DECL_SED])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_TAG_COMPILER])dnl +AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], + [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)], + [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for tagname in $tagnames; do - IFS="$lt_save_ifs" - # Check whether tagname contains only valid characters - case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in - "") ;; - *) AC_MSG_ERROR([invalid tag name: $tagname]) - ;; - esac + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&AS_MESSAGE_LOG_FD + echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes + fi + fi + chmod u+w . 2>&AS_MESSAGE_LOG_FD + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* +]) +_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1], + [Does compiler simultaneously support -c and -o options?]) +])# _LT_COMPILER_C_O - if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null - then - AC_MSG_ERROR([tag name \"$tagname\" already exists]) - fi - # Update the list of available tags. - if test -n "$tagname"; then - echo appending configuration tag \"$tagname\" to $ofile - - case $tagname in - CXX) - if test -n "$CXX" && ( test "X$CXX" != "Xno" && - ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || - (test "X$CXX" != "Xg++"))) ; then - AC_LIBTOOL_LANG_CXX_CONFIG - else - tagname="" - fi - ;; +# _LT_COMPILER_FILE_LOCKS([TAGNAME]) +# ---------------------------------- +# Check to see if we can do hard links to lock some files if needed +m4_defun([_LT_COMPILER_FILE_LOCKS], +[m4_require([_LT_ENABLE_LOCK])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +_LT_COMPILER_C_O([$1]) - F77) - if test -n "$F77" && test "X$F77" != "Xno"; then - AC_LIBTOOL_LANG_F77_CONFIG - else - tagname="" - fi - ;; +hard_links="nottested" +if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + AC_MSG_CHECKING([if we can lock with hard links]) + hard_links=yes + $RM conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + AC_MSG_RESULT([$hard_links]) + if test "$hard_links" = no; then + AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) + need_locks=warn + fi +else + need_locks=no +fi +_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?]) +])# _LT_COMPILER_FILE_LOCKS - GCJ) - if test -n "$GCJ" && test "X$GCJ" != "Xno"; then - AC_LIBTOOL_LANG_GCJ_CONFIG - else - tagname="" - fi - ;; - RC) - AC_LIBTOOL_LANG_RC_CONFIG - ;; +# _LT_CHECK_OBJDIR +# ---------------- +m4_defun([_LT_CHECK_OBJDIR], +[AC_CACHE_CHECK([for objdir], [lt_cv_objdir], +[rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + lt_cv_objdir=.libs +else + # MS-DOS does not allow filenames that begin with a dot. + lt_cv_objdir=_libs +fi +rmdir .libs 2>/dev/null]) +objdir=$lt_cv_objdir +_LT_DECL([], [objdir], [0], + [The name of the directory that contains temporary libtool files])dnl +m4_pattern_allow([LT_OBJDIR])dnl +AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/", + [Define to the sub-directory in which libtool stores uninstalled libraries.]) +])# _LT_CHECK_OBJDIR - *) - AC_MSG_ERROR([Unsupported tag name: $tagname]) - ;; - esac - # Append the new tag name to the list of available tags. - if test -n "$tagname" ; then - available_tags="$available_tags $tagname" - fi - fi - done - IFS="$lt_save_ifs" +# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME]) +# -------------------------------------- +# Check hardcoding attributes. +m4_defun([_LT_LINKER_HARDCODE_LIBPATH], +[AC_MSG_CHECKING([how to hardcode library paths into programs]) +_LT_TAGVAR(hardcode_action, $1)= +if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" || + test -n "$_LT_TAGVAR(runpath_var, $1)" || + test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then - # Now substitute the updated list of available tags. - if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then - mv "${ofile}T" "$ofile" - chmod +x "$ofile" + # We can hardcode non-existent directories. + if test "$_LT_TAGVAR(hardcode_direct, $1)" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no && + test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then + # Linking always hardcodes the temporary library directory. + _LT_TAGVAR(hardcode_action, $1)=relink else - rm -f "${ofile}T" - AC_MSG_ERROR([unable to update list of available tagged configurations.]) + # We can link without hardcoding, and we can hardcode nonexisting dirs. + _LT_TAGVAR(hardcode_action, $1)=immediate fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + _LT_TAGVAR(hardcode_action, $1)=unsupported fi -])# _LT_AC_TAGCONFIG +AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)]) +if test "$_LT_TAGVAR(hardcode_action, $1)" = relink || + test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi +_LT_TAGDECL([], [hardcode_action], [0], + [How to hardcode a shared library path into an executable]) +])# _LT_LINKER_HARDCODE_LIBPATH -# AC_LIBTOOL_DLOPEN -# ----------------- -# enable checks for dlopen support -AC_DEFUN([AC_LIBTOOL_DLOPEN], - [AC_BEFORE([$0],[AC_LIBTOOL_SETUP]) -])# AC_LIBTOOL_DLOPEN +# _LT_CMD_STRIPLIB +# ---------------- +m4_defun([_LT_CMD_STRIPLIB], +[m4_require([_LT_DECL_EGREP]) +striplib= +old_striplib= +AC_MSG_CHECKING([whether stripping libraries is possible]) +if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + AC_MSG_RESULT([yes]) +else +# FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP" ; then + striplib="$STRIP -x" + old_striplib="$STRIP -S" + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) + fi + ;; + *) + AC_MSG_RESULT([no]) + ;; + esac +fi +_LT_DECL([], [old_striplib], [1], [Commands to strip libraries]) +_LT_DECL([], [striplib], [1]) +])# _LT_CMD_STRIPLIB -# AC_LIBTOOL_WIN32_DLL -# -------------------- -# declare package support for building win32 DLLs -AC_DEFUN([AC_LIBTOOL_WIN32_DLL], -[AC_BEFORE([$0], [AC_LIBTOOL_SETUP]) -])# AC_LIBTOOL_WIN32_DLL +# _LT_SYS_DYNAMIC_LINKER([TAG]) +# ----------------------------- +# PORTME Fill in your ld.so characteristics +m4_defun([_LT_SYS_DYNAMIC_LINKER], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_OBJDUMP])dnl +m4_require([_LT_DECL_SED])dnl +m4_require([_LT_CHECK_SHELL_FEATURES])dnl +AC_MSG_CHECKING([dynamic linker characteristics]) +m4_if([$1], + [], [ +if test "$GCC" = yes; then + case $host_os in + darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; + *) lt_awk_arg="/^libraries:/" ;; + esac + case $host_os in + mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;; + *) lt_sed_strip_eq="s,=/,/,g" ;; + esac + lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` + case $lt_search_path_spec in + *\;*) + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` + ;; + *) + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` + ;; + esac + # Ok, now we have the path, separated by spaces, we can step through it + # and add multilib dir if necessary. + lt_tmp_lt_search_path_spec= + lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` + for lt_sys_path in $lt_search_path_spec; do + if test -d "$lt_sys_path/$lt_multi_os_dir"; then + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" + else + test -d "$lt_sys_path" && \ + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" + fi + done + lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' +BEGIN {RS=" "; FS="/|\n";} { + lt_foo=""; + lt_count=0; + for (lt_i = NF; lt_i > 0; lt_i--) { + if ($lt_i != "" && $lt_i != ".") { + if ($lt_i == "..") { + lt_count++; + } else { + if (lt_count == 0) { + lt_foo="/" $lt_i lt_foo; + } else { + lt_count--; + } + } + } + } + if (lt_foo != "") { lt_freq[[lt_foo]]++; } + if (lt_freq[[lt_foo]] == 1) { print lt_foo; } +}'` + # AWK program above erroneously prepends '/' to C:/dos/paths + # for these hosts. + case $host_os in + mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ + $SED 's,/\([[A-Za-z]]:\),\1,g'` ;; + esac + sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` +else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi]) +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=".so" +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +need_lib_prefix=unknown +hardcode_into_libs=no -# AC_ENABLE_SHARED([DEFAULT]) -# --------------------------- -# implement the --enable-shared flag -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -AC_DEFUN([AC_ENABLE_SHARED], -[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE([shared], - [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@], - [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])], - [p=${PACKAGE-default} - case $enableval in - yes) enable_shared=yes ;; - no) enable_shared=no ;; - *) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac], - [enable_shared=]AC_ENABLE_SHARED_DEFAULT) -])# AC_ENABLE_SHARED - +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown -# AC_DISABLE_SHARED -# ----------------- -#- set the default shared flag to --disable-shared -AC_DEFUN([AC_DISABLE_SHARED], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_SHARED(no) -])# AC_DISABLE_SHARED +case $host_os in +aix3*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + shlibpath_var=LIBPATH + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}${shared_ext}$major' + ;; -# AC_ENABLE_STATIC([DEFAULT]) -# --------------------------- -# implement the --enable-static flag -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -AC_DEFUN([AC_ENABLE_STATIC], -[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE([static], - [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@], - [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])], - [p=${PACKAGE-default} - case $enableval in - yes) enable_static=yes ;; - no) enable_static=no ;; - *) - enable_static=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS="$lt_save_ifs" +aix[[4-9]]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[[01]] | aix4.[[01]].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then + : + else + can_build_shared=no + fi ;; - esac], - [enable_static=]AC_ENABLE_STATIC_DEFAULT) -])# AC_ENABLE_STATIC - - -# AC_DISABLE_STATIC -# ----------------- -# set the default static flag to --disable-static -AC_DEFUN([AC_DISABLE_STATIC], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_STATIC(no) -])# AC_DISABLE_STATIC + esac + # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + if test "$aix_use_runtimelinking" = yes; then + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}${shared_ext}$major' + fi + shlibpath_var=LIBPATH + fi + ;; +amigaos*) + case $host_cpu in + powerpc) + # Since July 2007 AmigaOS4 officially supports .so libraries. + # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + ;; + m68k) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + esac + ;; -# AC_ENABLE_FAST_INSTALL([DEFAULT]) -# --------------------------------- -# implement the --enable-fast-install flag -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -AC_DEFUN([AC_ENABLE_FAST_INSTALL], -[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE([fast-install], - [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], - [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], - [p=${PACKAGE-default} - case $enableval in - yes) enable_fast_install=yes ;; - no) enable_fast_install=no ;; - *) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_fast_install=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac], - [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT) -])# AC_ENABLE_FAST_INSTALL +beos*) + library_names_spec='${libname}${shared_ext}' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; +bsdi[[45]]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; -# AC_DISABLE_FAST_INSTALL -# ----------------------- -# set the default to --disable-fast-install -AC_DEFUN([AC_DISABLE_FAST_INSTALL], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_FAST_INSTALL(no) -])# AC_DISABLE_FAST_INSTALL +cygwin* | mingw* | pw32* | cegcc*) + version_type=windows + shrext_cmds=".dll" + need_version=no + need_lib_prefix=no + case $GCC,$cc_basename in + yes,*) + # gcc + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes -# AC_LIBTOOL_PICMODE([MODE]) -# -------------------------- -# implement the --with-pic flag -# MODE is either `yes' or `no'. If omitted, it defaults to `both'. -AC_DEFUN([AC_LIBTOOL_PICMODE], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -pic_mode=ifelse($#,1,$1,default) -])# AC_LIBTOOL_PICMODE + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' +m4_if([$1], [],[ + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"]) + ;; + mingw* | cegcc*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + ;; + esac + dynamic_linker='Win32 ld.exe' + ;; + *,cl*) + # Native MSVC + libname_spec='$name' + soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + library_names_spec='${libname}.dll.lib' -# AC_PROG_EGREP -# ------------- -# This is predefined starting with Autoconf 2.54, so this conditional -# definition can be removed once we require Autoconf 2.54 or later. -m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP], -[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep], - [if echo a | (grep -E '(a|b)') >/dev/null 2>&1 - then ac_cv_prog_egrep='grep -E' - else ac_cv_prog_egrep='egrep' - fi]) - EGREP=$ac_cv_prog_egrep - AC_SUBST([EGREP]) -])]) + case $build_os in + mingw*) + sys_lib_search_path_spec= + lt_save_ifs=$IFS + IFS=';' + for lt_path in $LIB + do + IFS=$lt_save_ifs + # Let DOS variable expansion print the short 8.3 style file name. + lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` + sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" + done + IFS=$lt_save_ifs + # Convert to MSYS style. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'` + ;; + cygwin*) + # Convert to unix form, then to dos form, then back to unix form + # but this time dos style (no spaces!) so that the unix form looks + # like /cygdrive/c/PROGRA~1:/cygdr... + sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` + sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` + sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + ;; + *) + sys_lib_search_path_spec="$LIB" + if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then + # It is most probably a Windows format PATH. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + # FIXME: find the short name or the path components, as spaces are + # common. (e.g. "Program Files" -> "PROGRA~1") + ;; + esac + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + dynamic_linker='Win32 link.exe' + ;; -# AC_PATH_TOOL_PREFIX -# ------------------- -# find a file program which can recognise shared library -AC_DEFUN([AC_PATH_TOOL_PREFIX], -[AC_REQUIRE([AC_PROG_EGREP])dnl -AC_MSG_CHECKING([for $1]) -AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, -[case $MAGIC_CMD in -[[\\/*] | ?:[\\/]*]) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + *) + # Assume MSVC wrapper + library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' + dynamic_linker='Win32 ld.exe' + ;; + esac + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH ;; -*) - lt_save_MAGIC_CMD="$MAGIC_CMD" - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR -dnl $ac_dummy forces splitting on constant user-supplied paths. -dnl POSIX.2 word splitting is done only on the output of word expansions, -dnl not every word. This closes a longstanding sh security hole. - ac_dummy="ifelse([$2], , $PATH, [$2])" - for ac_dir in $ac_dummy; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$1; then - lt_cv_path_MAGIC_CMD="$ac_dir/$1" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - $EGREP "$file_magic_regex" > /dev/null; then - : - else - cat <&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org -EOF - fi ;; - esac - fi - break - fi - done - IFS="$lt_save_ifs" - MAGIC_CMD="$lt_save_MAGIC_CMD" +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' +m4_if([$1], [],[ + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ;; -esac]) -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - AC_MSG_RESULT($MAGIC_CMD) -else - AC_MSG_RESULT(no) -fi -])# AC_PATH_TOOL_PREFIX - -# AC_PATH_MAGIC -# ------------- -# find a file program which can recognise a shared library -AC_DEFUN([AC_PATH_MAGIC], -[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) -if test -z "$lt_cv_path_MAGIC_CMD"; then - if test -n "$ac_tool_prefix"; then - AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) +dgux*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` else - MAGIC_CMD=: + case $host_os in + freebsd[[23]].*) objformat=aout ;; + *) objformat=elf ;; + esac fi -fi -])# AC_PATH_MAGIC - - -# AC_PROG_LD -# ---------- -# find the pathname to the GNU or non-GNU linker -AC_DEFUN([AC_PROG_LD], -[AC_ARG_WITH([gnu-ld], - [AC_HELP_STRING([--with-gnu-ld], - [assume the C compiler uses GNU ld @<:@default=no@:>@])], - [test "$withval" = no || with_gnu_ld=yes], - [with_gnu_ld=no]) -AC_REQUIRE([LT_AC_PROG_SED])dnl -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -ac_prog=ld -if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - AC_MSG_CHECKING([for ld used by $CC]) - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [[\\/]]* | ?:[[\\/]]*) - re_direlt='/[[^/]][[^/]]*/\.\./' - # Canonicalize the pathname of ld - ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` - while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + need_version=no + need_lib_prefix=no ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld + freebsd-*) + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2.*) + shlibpath_overrides_runpath=yes ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown + freebsd3.[[01]]* | freebsdelf3.[[01]]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes ;; - esac -elif test "$with_gnu_ld" = yes; then - AC_MSG_CHECKING([for GNU ld]) -else - AC_MSG_CHECKING([for non-GNU ld]) -fi -AC_CACHE_VAL(lt_cv_path_LD, -[if test -z "$LD"; then - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some variants of GNU ld only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - case `"$lt_cv_path_LD" -v 2>&1 &1 /dev/null; then - case $host_cpu in - i*86 ) - # Not sure whether the presence of OpenBSD here was a mistake. - # Let's accept both of them until this is cleared up. - lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - ;; - esac - else - lt_cv_deplibs_check_method=pass_all - fi +gnu*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes ;; -gnu*) - lt_cv_deplibs_check_method=pass_all +haiku*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + dynamic_linker="$host_os runtime_loader" + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LIBRARY_PATH + shlibpath_overrides_runpath=yes + sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' + hardcode_into_libs=yes ;; -hpux10.20* | hpux11*) - lt_cv_file_magic_cmd=/usr/bin/file +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no case $host_cpu in ia64*) - lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' - lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + if test "X$HPUX_IA64_MODE" = X32; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + fi + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; hppa*64*) - [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'] - lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; *) - lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' - lt_cv_file_magic_test_file=/usr/lib/libc.sl + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' ;; esac + # HP-UX runs *really* slowly unless shared libraries are mode 555, ... + postinstall_cmds='chmod 555 $lib' + # or fails outright, so override atomically: + install_override_mode=555 + ;; + +interix[[3-9]]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes ;; irix5* | irix6* | nonstopux*) - case $LD in - *-32|*"-32 ") libmagic=32-bit;; - *-n32|*"-n32 ") libmagic=N32;; - *-64|*"-64 ") libmagic=64-bit;; - *) libmagic=never-match;; + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test "$lt_cv_prog_gnu_ld" = yes; then + version_type=linux # correct to gnu/linux during the next big refactor + else + version_type=irix + fi ;; esac - lt_cv_deplibs_check_method=pass_all + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + hardcode_into_libs=yes ;; -# This must be Linux ELF. -linux*) - lt_cv_deplibs_check_method=pass_all +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + +# This must be glibc/ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + + # Some binutils ld are patched to set DT_RUNPATH + AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath], + [lt_cv_shlibpath_overrides_runpath=no + save_LDFLAGS=$LDFLAGS + save_libdir=$libdir + eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \ + LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\"" + AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], + [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null], + [lt_cv_shlibpath_overrides_runpath=yes])]) + LDFLAGS=$save_LDFLAGS + libdir=$save_libdir + ]) + shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath + + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +netbsdelf*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='NetBSD ld.elf_so' ;; netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' else - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='NetBSD ld.elf_so' fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes ;; -newos6*) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=/usr/lib/libnls.so +newsos6) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes ;; -nto-qnx*) - lt_cv_deplibs_check_method=unknown +*nto* | *qnx*) + version_type=qnx + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='ldqnx.so' ;; openbsd*) - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' + version_type=sunos + sys_lib_dlsearch_path_spec="/usr/lib" + need_lib_prefix=no + # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. + case $host_os in + openbsd3.3 | openbsd3.3.*) need_version=yes ;; + *) need_version=no ;; + esac + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case $host_os in + openbsd2.[[89]] | openbsd2.[[89]].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac else - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' + shlibpath_overrides_runpath=yes fi ;; +os2*) + libname_spec='$name' + shrext_cmds=".dll" + need_lib_prefix=no + library_names_spec='$libname${shared_ext} $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + osf3* | osf4* | osf5*) - lt_cv_deplibs_check_method=pass_all + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ;; -sco3.2v5*) - lt_cv_deplibs_check_method=pass_all +rdos*) + dynamic_linker=no ;; solaris*) - lt_cv_deplibs_check_method=pass_all + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes ;; -sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) +sysv4 | sysv4.3*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH case $host_vendor in - motorola) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` - ;; - ncr) - lt_cv_deplibs_check_method=pass_all - ;; - sequent) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' - ;; - sni) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" - lt_cv_file_magic_test_file=/lib/libc.so - ;; - siemens) - lt_cv_deplibs_check_method=pass_all - ;; + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; esac ;; -sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7* | sysv4*uw2*) - lt_cv_deplibs_check_method=pass_all +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' + soname_spec='$libname${shared_ext}.$major' + shlibpath_var=LD_LIBRARY_PATH + fi ;; -esac -]) -file_magic_cmd=$lt_cv_file_magic_cmd -deplibs_check_method=$lt_cv_deplibs_check_method -test -z "$deplibs_check_method" && deplibs_check_method=unknown -])# AC_DEPLIBS_CHECK_METHOD +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + version_type=freebsd-elf + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + if test "$with_gnu_ld" = yes; then + sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' + else + sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' + case $host_os in + sco3.2v5*) + sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" + ;; + esac + fi + sys_lib_dlsearch_path_spec='/usr/lib' + ;; -# AC_PROG_NM -# ---------- -# find the pathname to a BSD-compatible name lister -AC_DEFUN([AC_PROG_NM], -[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM, -[if test -n "$NM"; then - # Let the user override the test. - lt_cv_path_NM="$NM" -else - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - tmp_nm="$ac_dir/${ac_tool_prefix}nm" - if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - # Tru64's nm complains that /dev/null is an invalid object file - case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in - */dev/null* | *'Invalid file or object type'*) - lt_cv_path_NM="$tmp_nm -B" - break - ;; - *) - case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in - */dev/null*) - lt_cv_path_NM="$tmp_nm -p" - break - ;; - *) - lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - ;; - esac - esac - fi - done - IFS="$lt_save_ifs" - test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm -fi]) -NM="$lt_cv_path_NM" -])# AC_PROG_NM - - -# AC_CHECK_LIBM -# ------------- -# check for math library -AC_DEFUN([AC_CHECK_LIBM], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -LIBM= -case $host in -*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*) - # These system don't have libm, or don't need it +tpf*) + # TPF is a cross-target only. Preferred cross-host = GNU/Linux. + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes ;; -*-ncr-sysv4.3*) - AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") - AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") + +uts4*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH ;; + *) - AC_CHECK_LIB(m, cos, LIBM="-lm") + dynamic_linker=no ;; esac -])# AC_CHECK_LIBM - - -# AC_LIBLTDL_CONVENIENCE([DIRECTORY]) -# ----------------------------------- -# sets LIBLTDL to the link flags for the libltdl convenience library and -# LTDLINCL to the include flags for the libltdl header and adds -# --enable-ltdl-convenience to the configure arguments. Note that -# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided, -# it is assumed to be `libltdl'. LIBLTDL will be prefixed with -# '${top_builddir}/' and LTDLINCL will be prefixed with '${top_srcdir}/' -# (note the single quotes!). If your package is not flat and you're not -# using automake, define top_builddir and top_srcdir appropriately in -# the Makefiles. -AC_DEFUN([AC_LIBLTDL_CONVENIENCE], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl - case $enable_ltdl_convenience in - no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; - "") enable_ltdl_convenience=yes - ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; - esac - LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la - LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) - # For backwards non-gettext consistent compatibility... - INCLTDL="$LTDLINCL" -])# AC_LIBLTDL_CONVENIENCE - - -# AC_LIBLTDL_INSTALLABLE([DIRECTORY]) -# ----------------------------------- -# sets LIBLTDL to the link flags for the libltdl installable library and -# LTDLINCL to the include flags for the libltdl header and adds -# --enable-ltdl-install to the configure arguments. Note that -# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided, -# and an installed libltdl is not found, it is assumed to be `libltdl'. -# LIBLTDL will be prefixed with '${top_builddir}/'# and LTDLINCL with -# '${top_srcdir}/' (note the single quotes!). If your package is not -# flat and you're not using automake, define top_builddir and top_srcdir -# appropriately in the Makefiles. -# In the future, this macro may have to be called after AC_PROG_LIBTOOL. -AC_DEFUN([AC_LIBLTDL_INSTALLABLE], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl - AC_CHECK_LIB(ltdl, lt_dlinit, - [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], - [if test x"$enable_ltdl_install" = xno; then - AC_MSG_WARN([libltdl not installed, but installation disabled]) - else - enable_ltdl_install=yes - fi - ]) - if test x"$enable_ltdl_install" = x"yes"; then - ac_configure_args="$ac_configure_args --enable-ltdl-install" - LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la - LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) - else - ac_configure_args="$ac_configure_args --enable-ltdl-install=no" - LIBLTDL="-lltdl" - LTDLINCL= - fi - # For backwards non-gettext consistent compatibility... - INCLTDL="$LTDLINCL" -])# AC_LIBLTDL_INSTALLABLE - - -# AC_LIBTOOL_CXX -# -------------- -# enable support for C++ libraries -AC_DEFUN([AC_LIBTOOL_CXX], -[AC_REQUIRE([_LT_AC_LANG_CXX]) -])# AC_LIBTOOL_CXX - - -# _LT_AC_LANG_CXX -# --------------- -AC_DEFUN([_LT_AC_LANG_CXX], -[AC_REQUIRE([AC_PROG_CXX]) -AC_REQUIRE([_LT_AC_PROG_CXXCPP]) -_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX]) -])# _LT_AC_LANG_CXX +AC_MSG_RESULT([$dynamic_linker]) +test "$dynamic_linker" = no && can_build_shared=no -# _LT_AC_PROG_CXXCPP -# --------------- -AC_DEFUN([_LT_AC_PROG_CXXCPP], -[ -AC_REQUIRE([AC_PROG_CXX]) -if test -n "$CXX" && ( test "X$CXX" != "Xno" && - ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || - (test "X$CXX" != "Xg++"))) ; then - AC_PROG_CXXCPP +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi -])# _LT_AC_PROG_CXXCPP -# AC_LIBTOOL_F77 -# -------------- -# enable support for Fortran 77 libraries -AC_DEFUN([AC_LIBTOOL_F77], -[AC_REQUIRE([_LT_AC_LANG_F77]) -])# AC_LIBTOOL_F77 +if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then + sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" +fi +if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then + sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" +fi +_LT_DECL([], [variables_saved_for_relink], [1], + [Variables whose values should be saved in libtool wrapper scripts and + restored at link time]) +_LT_DECL([], [need_lib_prefix], [0], + [Do we need the "lib" prefix for modules?]) +_LT_DECL([], [need_version], [0], [Do we need a version for libraries?]) +_LT_DECL([], [version_type], [0], [Library versioning type]) +_LT_DECL([], [runpath_var], [0], [Shared library runtime path variable]) +_LT_DECL([], [shlibpath_var], [0],[Shared library path variable]) +_LT_DECL([], [shlibpath_overrides_runpath], [0], + [Is shlibpath searched before the hard-coded library search path?]) +_LT_DECL([], [libname_spec], [1], [Format of library name prefix]) +_LT_DECL([], [library_names_spec], [1], + [[List of archive names. First name is the real one, the rest are links. + The last name is the one that the linker finds with -lNAME]]) +_LT_DECL([], [soname_spec], [1], + [[The coded name of the library, if different from the real name]]) +_LT_DECL([], [install_override_mode], [1], + [Permission mode override for installation of shared libraries]) +_LT_DECL([], [postinstall_cmds], [2], + [Command to use after installation of a shared archive]) +_LT_DECL([], [postuninstall_cmds], [2], + [Command to use after uninstallation of a shared archive]) +_LT_DECL([], [finish_cmds], [2], + [Commands used to finish a libtool library installation in a directory]) +_LT_DECL([], [finish_eval], [1], + [[As "finish_cmds", except a single script fragment to be evaled but + not shown]]) +_LT_DECL([], [hardcode_into_libs], [0], + [Whether we should hardcode library paths into libraries]) +_LT_DECL([], [sys_lib_search_path_spec], [2], + [Compile-time system search path for libraries]) +_LT_DECL([], [sys_lib_dlsearch_path_spec], [2], + [Run-time system search path for libraries]) +])# _LT_SYS_DYNAMIC_LINKER -# _LT_AC_LANG_F77 -# --------------- -AC_DEFUN([_LT_AC_LANG_F77], -[AC_REQUIRE([AC_PROG_F77]) -_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77]) -])# _LT_AC_LANG_F77 +# _LT_PATH_TOOL_PREFIX(TOOL) +# -------------------------- +# find a file program which can recognize shared library +AC_DEFUN([_LT_PATH_TOOL_PREFIX], +[m4_require([_LT_DECL_EGREP])dnl +AC_MSG_CHECKING([for $1]) +AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, +[case $MAGIC_CMD in +[[\\/*] | ?:[\\/]*]) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD="$MAGIC_CMD" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +dnl $ac_dummy forces splitting on constant user-supplied paths. +dnl POSIX.2 word splitting is done only on the output of word expansions, +dnl not every word. This closes a longstanding sh security hole. + ac_dummy="m4_if([$2], , $PATH, [$2])" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$1; then + lt_cv_path_MAGIC_CMD="$ac_dir/$1" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <<_LT_EOF 1>&2 -# AC_LIBTOOL_GCJ -# -------------- -# enable support for GCJ libraries -AC_DEFUN([AC_LIBTOOL_GCJ], -[AC_REQUIRE([_LT_AC_LANG_GCJ]) -])# AC_LIBTOOL_GCJ +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org +_LT_EOF + fi ;; + esac + fi + break + fi + done + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" + ;; +esac]) +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + AC_MSG_RESULT($MAGIC_CMD) +else + AC_MSG_RESULT(no) +fi +_LT_DECL([], [MAGIC_CMD], [0], + [Used to examine libraries when file_magic_cmd begins with "file"])dnl +])# _LT_PATH_TOOL_PREFIX -# _LT_AC_LANG_GCJ -# --------------- -AC_DEFUN([_LT_AC_LANG_GCJ], -[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[], - [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[], - [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[], - [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])], - [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])], - [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])]) -_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ]) -])# _LT_AC_LANG_GCJ +# Old name: +AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], []) -# AC_LIBTOOL_RC +# _LT_PATH_MAGIC # -------------- -# enable support for Windows resource files -AC_DEFUN([AC_LIBTOOL_RC], -[AC_REQUIRE([LT_AC_PROG_RC]) -_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC]) -])# AC_LIBTOOL_RC - - -# AC_LIBTOOL_LANG_C_CONFIG -# ------------------------ -# Ensure that the configuration vars for the C compiler are -# suitably defined. Those variables are subsequently used by -# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. -AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG]) -AC_DEFUN([_LT_AC_LANG_C_CONFIG], -[lt_save_CC="$CC" -AC_LANG_PUSH(C) - -# Source file extension for C test sources. -ac_ext=c - -# Object file extension for compiled C test sources. -objext=o -_LT_AC_TAGVAR(objext, $1)=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="int some_variable = 0;\n" +# find a file program which can recognize a shared library +m4_defun([_LT_PATH_MAGIC], +[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) +if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) + else + MAGIC_CMD=: + fi +fi +])# _LT_PATH_MAGIC -# Code to be used in simple link tests -lt_simple_link_test_code='int main(){return(0);}\n' -_LT_AC_SYS_COMPILER +# LT_PATH_LD +# ---------- +# find the pathname to the GNU or non-GNU linker +AC_DEFUN([LT_PATH_LD], +[AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +m4_require([_LT_DECL_SED])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_PROG_ECHO_BACKSLASH])dnl -# save warnings/boilerplate of simple test code -_LT_COMPILER_BOILERPLATE -_LT_LINKER_BOILERPLATE +AC_ARG_WITH([gnu-ld], + [AS_HELP_STRING([--with-gnu-ld], + [assume the C compiler uses GNU ld @<:@default=no@:>@])], + [test "$withval" = no || with_gnu_ld=yes], + [with_gnu_ld=no])dnl -# -# Check for any special shared library compilation flags. -# -_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)= -if test "$GCC" = no; then - case $host_os in - sco3.2v5*) - _LT_AC_TAGVAR(lt_prog_cc_shlib, $1)='-belf' +ac_prog=ld +if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + AC_MSG_CHECKING([for ld used by $CC]) + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [[\\/]]* | ?:[[\\/]]*) + re_direlt='/[[^/]][[^/]]*/\.\./' + # Canonicalize the pathname of ld + ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` + while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do + ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown ;; esac +elif test "$with_gnu_ld" = yes; then + AC_MSG_CHECKING([for GNU ld]) +else + AC_MSG_CHECKING([for non-GNU ld]) fi -if test -n "$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)"; then - AC_MSG_WARN([`$CC' requires `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to build shared libraries]) - if echo "$old_CC $old_CFLAGS " | grep "[[ ]]$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)[[ ]]" >/dev/null; then : - else - AC_MSG_WARN([add `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to the CC or CFLAGS env variable and reconfigure]) - _LT_AC_TAGVAR(lt_cv_prog_cc_can_build_shared, $1)=no - fi +AC_CACHE_VAL(lt_cv_path_LD, +[if test -z "$LD"; then + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some variants of GNU ld only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$lt_cv_path_LD" -v 2>&1 &1 /dev/null 2>&1; then + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + else + # Keep this pattern in sync with the one in func_win32_libid. + lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' + lt_cv_file_magic_cmd='$OBJDUMP -f' + fi + ;; - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' +cegcc*) + # use the weaker test based on 'objdump'. See mingw*. + lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' + ;; - # If archive_cmds runs LD, not CC, wlarc should be empty - # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to - # investigate it a little bit more. (MM) - wlarc='${wl}' +darwin* | rhapsody*) + lt_cv_deplibs_check_method=pass_all + ;; - # ancient GNU ld didn't support --whole-archive et. al. - if eval "`$CC -print-prog-name=ld` --help 2>&1" | \ - grep 'no-whole-archive' > /dev/null; then - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= - fi +freebsd* | dragonfly*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; + esac else - with_gnu_ld=no - wlarc= - - # A generic and very simple default shared library creation - # command for GNU C++ for the case where it uses the native - # linker, instead of GNU ld. If possible, this setting should - # overridden to take advantage of the native linker features on - # the platform it is being used on. - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' + lt_cv_deplibs_check_method=pass_all fi + ;; - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' +gnu*) + lt_cv_deplibs_check_method=pass_all + ;; -else - GXX=no - with_gnu_ld=no - wlarc= -fi +haiku*) + lt_cv_deplibs_check_method=pass_all + ;; -# PORTME: fill in a description of your system's C++ link characteristics -AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) -_LT_AC_TAGVAR(ld_shlibs, $1)=yes -case $host_os in - aix3*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no +hpux10.20* | hpux11*) + lt_cv_file_magic_cmd=/usr/bin/file + case $host_cpu in + ia64*) + lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' + lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so ;; - aix4* | aix5*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - aix_use_runtimelinking=no + hppa*64*) + [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'] + lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl + ;; + *) + lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library' + lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; + esac + ;; - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*) - for ld_flag in $LDFLAGS; do - case $ld_flag in - *-brtl*) - aix_use_runtimelinking=yes - break - ;; - esac - done - esac +interix[[3-9]]*) + # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$' + ;; - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi +irix5* | irix6* | nonstopux*) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; + esac + lt_cv_deplibs_check_method=pass_all + ;; - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - _LT_AC_TAGVAR(archive_cmds, $1)='' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes +# This must be glibc/ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu) + lt_cv_deplibs_check_method=pass_all + ;; - if test "$GXX" = yes; then - case $host_os in aix4.[[012]]|aix4.[[012]].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - else - # We have old collect2 - _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= - fi - esac - shared_flag='-shared' - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' - fi - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' - else - shared_flag='${wl}-bM:SRE' - fi - fi - fi +netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' + fi + ;; - # It seems that -bexpall does not export symbols beginning with - # underscore (_), so it is better to generate a list of symbols to export. - _LT_AC_TAGVAR(always_export_symbols, $1)=yes - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' - # Determine the default libpath from the value encoded in an empty executable. - _LT_AC_SYS_LIBPATH_AIX - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" +newos6*) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' - _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an empty executable. - _LT_AC_SYS_LIBPATH_AIX - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' - # -bexpall does not export symbols beginning with underscore (_) - _LT_AC_TAGVAR(always_export_symbols, $1)=yes - # Exported symbols can be pulled into shared objects from archives - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' ' - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes - # This is similar to how AIX traditionally builds its shared libraries. - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi - fi - ;; - chorus*) - case $cc_basename in - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; +*nto* | *qnx*) + lt_cv_deplibs_check_method=pass_all + ;; +openbsd*) + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' + fi + ;; - cygwin* | mingw* | pw32*) - # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, - # as there is no search path for DLLs. - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_AC_TAGVAR(always_export_symbols, $1)=no - _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - - if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi +osf3* | osf4* | osf5*) + lt_cv_deplibs_check_method=pass_all ;; - darwin* | rhapsody*) - case $host_os in - rhapsody* | darwin1.[[012]]) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress' - ;; - *) # Darwin 1.3 on - if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' - else - case ${MACOSX_DEPLOYMENT_TARGET} in - 10.[[012]]) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' - ;; - 10.*) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup' - ;; - esac - fi - ;; - esac - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_automatic, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='' - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - - if test "$GXX" = yes ; then - lt_int_apple_cc_single_mod=no - output_verbose_link_cmd='echo' - if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then - lt_int_apple_cc_single_mod=yes - fi - if test "X$lt_int_apple_cc_single_mod" = Xyes ; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' - fi - _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds - if test "X$lt_int_apple_cc_single_mod" = Xyes ; then - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - else - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - fi - _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - else - case $cc_basename in - xlc*) - output_verbose_link_cmd='echo' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' - _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - ;; - *) - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - fi - ;; - dgux*) - case $cc_basename in - ec++*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - ghcx*) - # Green Hills C++ Compiler - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac +rdos*) + lt_cv_deplibs_check_method=pass_all + ;; + +solaris*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv4 | sysv4.3*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ;; - freebsd[[12]]*) - # C++ shared libraries reported to be fairly broken before switch to ELF - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - freebsd-elf*) - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - ;; - freebsd* | kfreebsd*-gnu | dragonfly*) - # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF - # conventions - _LT_AC_TAGVAR(ld_shlibs, $1)=yes + ncr) + lt_cv_deplibs_check_method=pass_all ;; - gnu*) + sequent) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;; - hpux9*) - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, - # but as the default - # location of the library. - - case $cc_basename in - CC*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - aCC*) - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[[-]]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - *) - if test "$GXX" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - else - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac + sni) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" + lt_cv_file_magic_test_file=/lib/libc.so ;; - hpux10*|hpux11*) - if test $with_gnu_ld = no; then - case $host_cpu in - hppa*64*) - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - ;; - ia64*) - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - ;; - *) - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - ;; - esac - fi - case $host_cpu in - hppa*64*) - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - ia64*) - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, - # but as the default - # location of the library. - ;; - *) - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, - # but as the default - # location of the library. - ;; - esac - - case $cc_basename in - CC*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - aCC*) - case $host_cpu in - hppa*64*|ia64*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' - ;; - *) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - esac - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - *) - if test "$GXX" = yes; then - if test $with_gnu_ld = no; then - case $host_cpu in - ia64*|hppa*64*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' - ;; - *) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - esac - fi - else - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac + siemens) + lt_cv_deplibs_check_method=pass_all ;; - irix5* | irix6*) - case $cc_basename in - CC*) - # SGI C++ - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - - # Archives containing C++ object files must be created using - # "CC -ar", where "CC" is the IRIX C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' - ;; - *) - if test "$GXX" = yes; then - if test "$with_gnu_ld" = no; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib' - fi - fi - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - ;; - esac - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + pc) + lt_cv_deplibs_check_method=pass_all ;; - linux*) - case $cc_basename in - KCC*) - # Kuck and Associates, Inc. (KAI) C++ Compiler - - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - - # Archives containing C++ object files must be created using - # "CC -Bstatic", where "CC" is the KAI C++ compiler. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' - ;; - icpc*) - # Intel C++ - with_gnu_ld=yes - # version 8.0 and above of icpc choke on multiply defined symbols - # if we add $predep_objects and $postdep_objects, however 7.1 and - # earlier do not add the objects themselves. - case `$CC -V 2>&1` in - *"Version 7."*) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - ;; - *) # Version 8.0 or newer - tmp_idyn= - case $host_cpu in - ia64*) tmp_idyn=' -i_dynamic';; - esac - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - ;; - esac - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' - ;; - pgCC*) - # Portland Group C++ compiler - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' - ;; - cxx*) - # Compaq C++ - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' + esac + ;; - runpath_var=LD_RUN_PATH - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +tpf*) + lt_cv_deplibs_check_method=pass_all + ;; +esac +]) - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - esac - ;; - lynxos*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - m88k*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - mvs*) - case $cc_basename in - cxx*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' - wlarc= - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - fi - # Workaround some broken pre-1.5 toolchains - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' - ;; - openbsd2*) - # C++ shared libraries are fairly broken - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - openbsd*) - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' +file_magic_glob= +want_nocaseglob=no +if test "$build" = "$host"; then + case $host_os in + mingw* | pw32*) + if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then + want_nocaseglob=yes + else + file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"` fi - output_verbose_link_cmd='echo' ;; - osf3*) - case $cc_basename in - KCC*) - # Kuck and Associates, Inc. (KAI) C++ Compiler + esac +fi - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Archives containing C++ object files must be created using - # "CC -Bstatic", where "CC" is the KAI C++ compiler. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' - - ;; - RCC*) - # Rational C++ 2.4.1 - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - cxx*) - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - *) - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' +file_magic_cmd=$lt_cv_file_magic_cmd +deplibs_check_method=$lt_cv_deplibs_check_method +test -z "$deplibs_check_method" && deplibs_check_method=unknown - else - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - osf4* | osf5*) - case $cc_basename in - KCC*) - # Kuck and Associates, Inc. (KAI) C++ Compiler +_LT_DECL([], [deplibs_check_method], [1], + [Method to check whether dependent libraries are shared objects]) +_LT_DECL([], [file_magic_cmd], [1], + [Command to use when deplibs_check_method = "file_magic"]) +_LT_DECL([], [file_magic_glob], [1], + [How to find potential files when deplibs_check_method = "file_magic"]) +_LT_DECL([], [want_nocaseglob], [1], + [Find potential files using nocaseglob when deplibs_check_method = "file_magic"]) +])# _LT_CHECK_MAGIC_METHOD - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Archives containing C++ object files must be created using - # the KAI C++ compiler. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' - ;; - RCC*) - # Rational C++ 2.4.1 - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - cxx*) - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ - echo "-hidden">> $lib.exp~ - $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~ - $rm $lib.exp' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - *) - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' - else - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - psos*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - sco*) - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - case $cc_basename in - CC*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - sunos4*) - case $cc_basename in - CC*) - # Sun C++ 4.x - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - lcc*) - # Lucid - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - solaris*) - case $cc_basename in - CC*) - # Sun C++ 4.2, 5.x and Centerline C++ - _LT_AC_TAGVAR(archive_cmds_need_lc,$1)=yes - _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - case $host_os in - solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; +# LT_PATH_NM +# ---------- +# find the pathname to a BSD- or MS-compatible name lister +AC_DEFUN([LT_PATH_NM], +[AC_REQUIRE([AC_PROG_CC])dnl +AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM, +[if test -n "$NM"; then + # Let the user override the test. + lt_cv_path_NM="$NM" +else + lt_nm_to_check="${ac_tool_prefix}nm" + if test -n "$ac_tool_prefix" && test "$build" = "$host"; then + lt_nm_to_check="$lt_nm_to_check nm" + fi + for lt_tmp_nm in $lt_nm_to_check; do + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + tmp_nm="$ac_dir/$lt_tmp_nm" + if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then + # Check to see if the nm accepts a BSD-compat flag. + # Adding the `sed 1q' prevents false positives on HP-UX, which says: + # nm: unknown option "B" ignored + # Tru64's nm complains that /dev/null is an invalid object file + case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in + */dev/null* | *'Invalid file or object type'*) + lt_cv_path_NM="$tmp_nm -B" + break + ;; + *) + case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in + */dev/null*) + lt_cv_path_NM="$tmp_nm -p" + break + ;; *) - # The C++ compiler is used as linker so we must use $wl - # flag to pass the commands to the underlying system - # linker. We must also pass each convience library through - # to the system linker between allextract/defaultextract. - # The C++ compiler will combine linker options so we - # cannot just pass the convience library names through - # without $wl. - # Supported since Solaris 2.6 (maybe 2.5.1?) - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags ;; + esac + ;; esac - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - - output_verbose_link_cmd='echo' - - # Archives containing C++ object files must be created using - # "CC -xar", where "CC" is the Sun C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' - ;; - gcx*) - # Green Hills C++ Compiler - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - - # The C++ compiler must be used to create the archive. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' - ;; - *) - # GNU C++ compiler with Solaris linker - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' - if $CC --version | grep -v '^2\.7' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" - else - # g++ 2.7 appears to require `-G' NOT `-shared' on this - # platform. - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' + fi + done + IFS="$lt_save_ifs" + done + : ${lt_cv_path_NM=no} +fi]) +if test "$lt_cv_path_NM" != "no"; then + NM="$lt_cv_path_NM" +else + # Didn't find any BSD compatible name lister, look for dumpbin. + if test -n "$DUMPBIN"; then : + # Let the user override the test. + else + AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :) + case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in + *COFF*) + DUMPBIN="$DUMPBIN -symbols" + ;; + *) + DUMPBIN=: + ;; + esac + fi + AC_SUBST([DUMPBIN]) + if test "$DUMPBIN" != ":"; then + NM="$DUMPBIN" + fi +fi +test -z "$NM" && NM=nm +AC_SUBST([NM]) +_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" - fi +AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface], + [lt_cv_nm_interface="BSD nm" + echo "int some_variable = 0;" > conftest.$ac_ext + (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$ac_compile" 2>conftest.err) + cat conftest.err >&AS_MESSAGE_LOG_FD + (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD) + (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) + cat conftest.err >&AS_MESSAGE_LOG_FD + (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD) + cat conftest.out >&AS_MESSAGE_LOG_FD + if $GREP 'External.*some_variable' conftest.out > /dev/null; then + lt_cv_nm_interface="MS dumpbin" + fi + rm -f conftest*]) +])# LT_PATH_NM + +# Old names: +AU_ALIAS([AM_PROG_NM], [LT_PATH_NM]) +AU_ALIAS([AC_PROG_NM], [LT_PATH_NM]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AM_PROG_NM], []) +dnl AC_DEFUN([AC_PROG_NM], []) + +# _LT_CHECK_SHAREDLIB_FROM_LINKLIB +# -------------------------------- +# how to determine the name of the shared library +# associated with a specific link library. +# -- PORTME fill in with the dynamic library characteristics +m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB], +[m4_require([_LT_DECL_EGREP]) +m4_require([_LT_DECL_OBJDUMP]) +m4_require([_LT_DECL_DLLTOOL]) +AC_CACHE_CHECK([how to associate runtime and link libraries], +lt_cv_sharedlib_from_linklib_cmd, +[lt_cv_sharedlib_from_linklib_cmd='unknown' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' - fi - ;; - esac - ;; - sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*) - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - ;; - tandem*) - case $cc_basename in - NCC*) - # NonStop-UX NCC 3.20 - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - vxworks*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no +case $host_os in +cygwin* | mingw* | pw32* | cegcc*) + # two different shell functions defined in ltmain.sh + # decide which to use based on capabilities of $DLLTOOL + case `$DLLTOOL --help 2>&1` in + *--identify-strict*) + lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib ;; *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no + lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback ;; + esac + ;; +*) + # fallback: assume linklib IS sharedlib + lt_cv_sharedlib_from_linklib_cmd="$ECHO" + ;; esac -AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) -test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no +]) +sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd +test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO -_LT_AC_TAGVAR(GCC, $1)="$GXX" -_LT_AC_TAGVAR(LD, $1)="$LD" +_LT_DECL([], [sharedlib_from_linklib_cmd], [1], + [Command to associate shared and link libraries]) +])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB -AC_LIBTOOL_POSTDEP_PREDEP($1) -AC_LIBTOOL_PROG_COMPILER_PIC($1) -AC_LIBTOOL_PROG_CC_C_O($1) -AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) -AC_LIBTOOL_PROG_LD_SHLIBS($1) -AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) -AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) -AC_LIBTOOL_SYS_LIB_STRIP -AC_LIBTOOL_DLOPEN_SELF($1) -AC_LIBTOOL_CONFIG($1) +# _LT_PATH_MANIFEST_TOOL +# ---------------------- +# locate the manifest tool +m4_defun([_LT_PATH_MANIFEST_TOOL], +[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :) +test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt +AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool], + [lt_cv_path_mainfest_tool=no + echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD + $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out + cat conftest.err >&AS_MESSAGE_LOG_FD + if $GREP 'Manifest Tool' conftest.out > /dev/null; then + lt_cv_path_mainfest_tool=yes + fi + rm -f conftest*]) +if test "x$lt_cv_path_mainfest_tool" != xyes; then + MANIFEST_TOOL=: +fi +_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl +])# _LT_PATH_MANIFEST_TOOL -AC_LANG_POP -CC=$lt_save_CC -LDCXX=$LD -LD=$lt_save_LD -GCC=$lt_save_GCC -with_gnu_ldcxx=$with_gnu_ld -with_gnu_ld=$lt_save_with_gnu_ld -lt_cv_path_LDCXX=$lt_cv_path_LD -lt_cv_path_LD=$lt_save_path_LD -lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld -lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld -])# AC_LIBTOOL_LANG_CXX_CONFIG -# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME]) -# ------------------------ -# Figure out "hidden" library dependencies from verbose -# compiler output when linking a shared library. -# Parse the compiler output and extract the necessary -# objects, libraries and library flags. -AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],[ -dnl we can't use the lt_simple_compile_test_code here, -dnl because it contains code intended for an executable, -dnl not a library. It's possible we should let each -dnl tag define a new lt_????_link_test_code variable, -dnl but it's only used here... -ifelse([$1],[],[cat > conftest.$ac_ext < conftest.$ac_ext < conftest.$ac_ext < conftest.$ac_ext <&1` in +*GNU* | *'with BFD'*) + symcode='[[ABCDGIRSTW]]' ;; +esac -AC_LIBTOOL_CONFIG($1) +# Transform an extracted symbol line into a proper C declaration. +# Some systems (esp. on ia64) link data and code symbols differently, +# so use this general approach. +lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" -AC_LANG_POP -CC="$lt_save_CC" -])# AC_LIBTOOL_LANG_F77_CONFIG +# Transform an extracted symbol line into symbol name and symbol address +lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'" +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'" +# Handle CRLF in mingw tool chain +opt_cr= +case $build_os in +mingw*) + opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp + ;; +esac -# AC_LIBTOOL_LANG_GCJ_CONFIG -# -------------------------- -# Ensure that the configuration vars for the C compiler are -# suitably defined. Those variables are subsequently used by -# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. -AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)]) -AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG], -[AC_LANG_SAVE +# Try without a prefix underscore, then with it. +for ac_symprfx in "" "_"; do -# Source file extension for Java test sources. -ac_ext=java + # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. + symxfrm="\\1 $ac_symprfx\\2 \\2" -# Object file extension for compiled Java test sources. -objext=o -_LT_AC_TAGVAR(objext, $1)=$objext + # Write the raw and C identifiers. + if test "$lt_cv_nm_interface" = "MS dumpbin"; then + # Fake it for dumpbin and say T for any non-static function + # and D for any global variable. + # Also find C++ and __fastcall symbols from MSVC++, + # which start with @ or ?. + lt_cv_sys_global_symbol_pipe="$AWK ['"\ +" {last_section=section; section=\$ 3};"\ +" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ +" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ +" \$ 0!~/External *\|/{next};"\ +" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ +" {if(hide[section]) next};"\ +" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ +" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ +" s[1]~/^[@?]/{print s[1], s[1]; next};"\ +" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ +" ' prfx=^$ac_symprfx]" + else + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + fi + lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" -# Code to be used in simple compile tests -lt_simple_compile_test_code="class foo {}\n" + # Check to see that the pipe works correctly. + pipe_works=no -# Code to be used in simple link tests -lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }\n' + rm -f conftest* + cat > conftest.$ac_ext <<_LT_EOF +#ifdef __cplusplus +extern "C" { +#endif +char nm_test_var; +void nm_test_func(void); +void nm_test_func(void){} +#ifdef __cplusplus +} +#endif +int main(){nm_test_var='a';nm_test_func();return(0);} +_LT_EOF -# ltmain only uses $CC for tagged configurations so make sure $CC is set. -_LT_AC_SYS_COMPILER + if AC_TRY_EVAL(ac_compile); then + # Now try to grab the symbols. + nlist=conftest.nm + if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" + else + rm -f "$nlist"T + fi -# save warnings/boilerplate of simple test code -_LT_COMPILER_BOILERPLATE -_LT_LINKER_BOILERPLATE + # Make sure that we snagged all the symbols we need. + if $GREP ' nm_test_var$' "$nlist" >/dev/null; then + if $GREP ' nm_test_func$' "$nlist" >/dev/null; then + cat <<_LT_EOF > conftest.$ac_ext +/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ +#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) +/* DATA imports from DLLs on WIN32 con't be const, because runtime + relocations are performed -- see ld's documentation on pseudo-relocs. */ +# define LT@&t@_DLSYM_CONST +#elif defined(__osf__) +/* This system does not cope well with relocations in const data. */ +# define LT@&t@_DLSYM_CONST +#else +# define LT@&t@_DLSYM_CONST const +#endif -# Allow CC to be a program name with arguments. -lt_save_CC="$CC" -CC=${GCJ-"gcj"} -compiler=$CC -_LT_AC_TAGVAR(compiler, $1)=$CC -_LT_CC_BASENAME([$compiler]) +#ifdef __cplusplus +extern "C" { +#endif -# GCJ did not exist at the time GCC didn't implicitly link libc in. -_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_EOF + # Now generate the symbol file. + eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' -_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds + cat <<_LT_EOF >> conftest.$ac_ext -AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1) -AC_LIBTOOL_PROG_COMPILER_PIC($1) -AC_LIBTOOL_PROG_CC_C_O($1) -AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) -AC_LIBTOOL_PROG_LD_SHLIBS($1) -AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) -AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) -AC_LIBTOOL_SYS_LIB_STRIP -AC_LIBTOOL_DLOPEN_SELF($1) +/* The mapping between symbol names and symbols. */ +LT@&t@_DLSYM_CONST struct { + const char *name; + void *address; +} +lt__PROGRAM__LTX_preloaded_symbols[[]] = +{ + { "@PROGRAM@", (void *) 0 }, +_LT_EOF + $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext + cat <<\_LT_EOF >> conftest.$ac_ext + {0, (void *) 0} +}; -AC_LIBTOOL_CONFIG($1) +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt__PROGRAM__LTX_preloaded_symbols; +} +#endif -AC_LANG_RESTORE -CC="$lt_save_CC" -])# AC_LIBTOOL_LANG_GCJ_CONFIG +#ifdef __cplusplus +} +#endif +_LT_EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext + lt_globsym_save_LIBS=$LIBS + lt_globsym_save_CFLAGS=$CFLAGS + LIBS="conftstm.$ac_objext" + CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" + if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then + pipe_works=yes + fi + LIBS=$lt_globsym_save_LIBS + CFLAGS=$lt_globsym_save_CFLAGS + else + echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD + fi + else + echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD + fi + else + echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD + fi + else + echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD + cat conftest.$ac_ext >&5 + fi + rm -rf conftest* conftst* + # Do not use the global_symbol_pipe unless it works. + if test "$pipe_works" = yes; then + break + else + lt_cv_sys_global_symbol_pipe= + fi +done +]) +if test -z "$lt_cv_sys_global_symbol_pipe"; then + lt_cv_sys_global_symbol_to_cdecl= +fi +if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then + AC_MSG_RESULT(failed) +else + AC_MSG_RESULT(ok) +fi -# AC_LIBTOOL_LANG_RC_CONFIG -# -------------------------- -# Ensure that the configuration vars for the Windows resource compiler are -# suitably defined. Those variables are subsequently used by -# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. -AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)]) -AC_DEFUN([_LT_AC_LANG_RC_CONFIG], -[AC_LANG_SAVE +# Response file support. +if test "$lt_cv_nm_interface" = "MS dumpbin"; then + nm_file_list_spec='@' +elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then + nm_file_list_spec='@' +fi + +_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1], + [Take the output of nm and produce a listing of raw symbols and C names]) +_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1], + [Transform the output of nm in a proper C declaration]) +_LT_DECL([global_symbol_to_c_name_address], + [lt_cv_sys_global_symbol_to_c_name_address], [1], + [Transform the output of nm in a C name address pair]) +_LT_DECL([global_symbol_to_c_name_address_lib_prefix], + [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1], + [Transform the output of nm in a C name address pair when lib prefix is needed]) +_LT_DECL([], [nm_file_list_spec], [1], + [Specify filename containing input files for $NM]) +]) # _LT_CMD_GLOBAL_SYMBOLS -# Source file extension for RC test sources. -ac_ext=rc -# Object file extension for compiled RC test sources. -objext=o -_LT_AC_TAGVAR(objext, $1)=$objext +# _LT_COMPILER_PIC([TAGNAME]) +# --------------------------- +m4_defun([_LT_COMPILER_PIC], +[m4_require([_LT_TAG_COMPILER])dnl +_LT_TAGVAR(lt_prog_compiler_wl, $1)= +_LT_TAGVAR(lt_prog_compiler_pic, $1)= +_LT_TAGVAR(lt_prog_compiler_static, $1)= -# Code to be used in simple compile tests -lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n' +m4_if([$1], [CXX], [ + # C++ specific cases for pic, static, wl, etc. + if test "$GXX" = yes; then + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' -# Code to be used in simple link tests -lt_simple_link_test_code="$lt_simple_compile_test_code" + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; -# ltmain only uses $CC for tagged configurations so make sure $CC is set. -_LT_AC_SYS_COMPILER + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + m68k) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + ;; + esac + ;; -# save warnings/boilerplate of simple test code -_LT_COMPILER_BOILERPLATE -_LT_LINKER_BOILERPLATE - -# Allow CC to be a program name with arguments. -lt_save_CC="$CC" -CC=${RC-"windres"} -compiler=$CC -_LT_AC_TAGVAR(compiler, $1)=$CC -_LT_CC_BASENAME([$compiler]) -_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes - -AC_LIBTOOL_CONFIG($1) - -AC_LANG_RESTORE -CC="$lt_save_CC" -])# AC_LIBTOOL_LANG_RC_CONFIG - - -# AC_LIBTOOL_CONFIG([TAGNAME]) -# ---------------------------- -# If TAGNAME is not passed, then create an initial libtool script -# with a default configuration from the untagged config vars. Otherwise -# add code to config.status for appending the configuration named by -# TAGNAME from the matching tagged config vars. -AC_DEFUN([AC_LIBTOOL_CONFIG], -[# The else clause should only fire when bootstrapping the -# libtool distribution, otherwise you forgot to ship ltmain.sh -# with your package, and you will get complaints that there are -# no rules to generate ltmain.sh. -if test -f "$ltmain"; then - # See if we are running on zsh, and set the options which allow our commands through - # without removal of \ escapes. - if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST - fi - # Now quote all the things that may contain metacharacters while being - # careful not to overquote the AC_SUBSTed values. We take copies of the - # variables and quote the copies for generation of the libtool script. - for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \ - SED SHELL STRIP \ - libname_spec library_names_spec soname_spec extract_expsyms_cmds \ - old_striplib striplib file_magic_cmd finish_cmds finish_eval \ - deplibs_check_method reload_flag reload_cmds need_locks \ - lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ - lt_cv_sys_global_symbol_to_c_name_address \ - sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ - old_postinstall_cmds old_postuninstall_cmds \ - _LT_AC_TAGVAR(compiler, $1) \ - _LT_AC_TAGVAR(CC, $1) \ - _LT_AC_TAGVAR(LD, $1) \ - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \ - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \ - _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \ - _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \ - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \ - _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \ - _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \ - _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \ - _LT_AC_TAGVAR(old_archive_cmds, $1) \ - _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \ - _LT_AC_TAGVAR(predep_objects, $1) \ - _LT_AC_TAGVAR(postdep_objects, $1) \ - _LT_AC_TAGVAR(predeps, $1) \ - _LT_AC_TAGVAR(postdeps, $1) \ - _LT_AC_TAGVAR(compiler_lib_search_path, $1) \ - _LT_AC_TAGVAR(archive_cmds, $1) \ - _LT_AC_TAGVAR(archive_expsym_cmds, $1) \ - _LT_AC_TAGVAR(postinstall_cmds, $1) \ - _LT_AC_TAGVAR(postuninstall_cmds, $1) \ - _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \ - _LT_AC_TAGVAR(allow_undefined_flag, $1) \ - _LT_AC_TAGVAR(no_undefined_flag, $1) \ - _LT_AC_TAGVAR(export_symbols_cmds, $1) \ - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \ - _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \ - _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \ - _LT_AC_TAGVAR(hardcode_automatic, $1) \ - _LT_AC_TAGVAR(module_cmds, $1) \ - _LT_AC_TAGVAR(module_expsym_cmds, $1) \ - _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \ - _LT_AC_TAGVAR(exclude_expsyms, $1) \ - _LT_AC_TAGVAR(include_expsyms, $1); do - - case $var in - _LT_AC_TAGVAR(old_archive_cmds, $1) | \ - _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \ - _LT_AC_TAGVAR(archive_cmds, $1) | \ - _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \ - _LT_AC_TAGVAR(module_cmds, $1) | \ - _LT_AC_TAGVAR(module_expsym_cmds, $1) | \ - _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \ - _LT_AC_TAGVAR(export_symbols_cmds, $1) | \ - extract_expsyms_cmds | reload_cmds | finish_cmds | \ - postinstall_cmds | postuninstall_cmds | \ - old_postinstall_cmds | old_postuninstall_cmds | \ - sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) - # Double-quote double-evaled strings. - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + mingw* | cygwin* | os2* | pw32* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + # Although the cygwin gcc ignores -fPIC, still need this for old-style + # (--disable-auto-import) libraries + m4_if([$1], [GCJ], [], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + ;; + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + ;; + *djgpp*) + # DJGPP does not support shared libraries at all + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + ;; + haiku*) + # PIC is the default for Haiku. + # The "-static" flag exists, but is broken. + _LT_TAGVAR(lt_prog_compiler_static, $1)= + ;; + interix[[3-9]]*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + sysv4*MP*) + if test -d /usr/nec; then + _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic + fi + ;; + hpux*) + # PIC is the default for 64-bit PA HP-UX, but not for 32-bit + # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag + # sets the default TLS model and affects inlining. + case $host_cpu in + hppa*64*) + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + ;; + *qnx* | *nto*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ;; *) - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac - done - - case $lt_echo in - *'\[$]0 --fallback-echo"') - lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'` - ;; - esac - -ifelse([$1], [], - [cfgfile="${ofile}T" - trap "$rm \"$cfgfile\"; exit 1" 1 2 15 - $rm -f "$cfgfile" - AC_MSG_NOTICE([creating $ofile])], - [cfgfile="$ofile"]) + else + case $host_os in + aix[[4-9]]*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + else + _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' + fi + ;; + chorus*) + case $cc_basename in + cxch68*) + # Green Hills C++ Compiler + # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" + ;; + esac + ;; + mingw* | cygwin* | os2* | pw32* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + m4_if([$1], [GCJ], [], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + ;; + dgux*) + case $cc_basename in + ec++*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + ;; + ghcx*) + # Green Hills C++ Compiler + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + *) + ;; + esac + ;; + freebsd* | dragonfly*) + # FreeBSD uses GNU C++ + ;; + hpux9* | hpux10* | hpux11*) + case $cc_basename in + CC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + if test "$host_cpu" != ia64; then + _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + fi + ;; + aCC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + ;; + esac + ;; + *) + ;; + esac + ;; + interix*) + # This is c89, which is MS Visual C++ (no shared libs) + # Anyone wants to do a port? + ;; + irix5* | irix6* | nonstopux*) + case $cc_basename in + CC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + # CC pic flag -KPIC is the default. + ;; + *) + ;; + esac + ;; + linux* | k*bsd*-gnu | kopensolaris*-gnu) + case $cc_basename in + KCC*) + # KAI C++ Compiler + _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + ecpc* ) + # old Intel C++ for x86_64 which still supported -KPIC. + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + icpc* ) + # Intel C++, used to be incompatible with GCC. + # ICC 10 doesn't accept -KPIC any more. + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + pgCC* | pgcpp*) + # Portland Group C++ compiler + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + cxx*) + # Compaq C++ + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*) + # IBM XL 8.0, 9.0 on PPC and BlueGene + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C++ 5.9 + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + ;; + esac + ;; + esac + ;; + lynxos*) + ;; + m88k*) + ;; + mvs*) + case $cc_basename in + cxx*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' + ;; + *) + ;; + esac + ;; + netbsd* | netbsdelf*-gnu) + ;; + *qnx* | *nto*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; + osf3* | osf4* | osf5*) + case $cc_basename in + KCC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' + ;; + RCC*) + # Rational C++ 2.4.1 + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + cxx*) + # Digital/Compaq C++ + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + *) + ;; + esac + ;; + psos*) + ;; + solaris*) + case $cc_basename in + CC* | sunCC*) + # Sun C++ 4.2, 5.x and Centerline C++ + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + ;; + gcx*) + # Green Hills C++ Compiler + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + ;; + *) + ;; + esac + ;; + sunos4*) + case $cc_basename in + CC*) + # Sun C++ 4.x + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + lcc*) + # Lucid + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + *) + ;; + esac + ;; + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + case $cc_basename in + CC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + esac + ;; + tandem*) + case $cc_basename in + NCC*) + # NonStop-UX NCC 3.20 + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + ;; + *) + ;; + esac + ;; + vxworks*) + ;; + *) + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + esac + fi +], +[ + if test "$GCC" = yes; then + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' - cat <<__EOF__ >> "$cfgfile" -ifelse([$1], [], -[#! $SHELL + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; -# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services. -# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) -# NOTE: Changes made to this file will be lost: look at ltmain.sh. -# -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 -# Free Software Foundation, Inc. -# -# This file is part of GNU Libtool: -# Originally by Gordon Matzigkeit , 1996 -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + m68k) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + ;; + esac + ;; -# A sed program that does not truncate output. -SED=$lt_SED + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; -# Sed that helps us avoid accidentally triggering echo(1) options like -n. -Xsed="$SED -e 1s/^X//" + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + # Although the cygwin gcc ignores -fPIC, still need this for old-style + # (--disable-auto-import) libraries + m4_if([$1], [GCJ], [], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + ;; -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + ;; -# The names of the tagged configurations supported by this script. -available_tags= + haiku*) + # PIC is the default for Haiku. + # The "-static" flag exists, but is broken. + _LT_TAGVAR(lt_prog_compiler_static, $1)= + ;; -# ### BEGIN LIBTOOL CONFIG], -[# ### BEGIN LIBTOOL TAG CONFIG: $tagname]) + hpux*) + # PIC is the default for 64-bit PA HP-UX, but not for 32-bit + # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag + # sets the default TLS model and affects inlining. + case $host_cpu in + hppa*64*) + # +Z the default + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + ;; -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: + interix[[3-9]]*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + enable_shared=no + ;; -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; -# Whether or not to build static libraries. -build_old_libs=$enable_static + sysv4*MP*) + if test -d /usr/nec; then + _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic + fi + ;; -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1) - -# Whether or not to disallow shared libs when runtime libs are static -allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) - -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install - -# The host system. -host_alias=$host_alias -host=$host -host_os=$host_os - -# The build system. -build_alias=$build_alias -build=$build -build_os=$build_os - -# An echo program that does not interpret backslashes. -echo=$lt_echo - -# The archiver. -AR=$lt_AR -AR_FLAGS=$lt_AR_FLAGS + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac -# A C compiler. -LTCC=$lt_LTCC + case $cc_basename in + nvcc*) # Cuda Compiler Driver 2.2 + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker ' + if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then + _LT_TAGVAR(lt_prog_compiler_pic, $1)="-Xcompiler $_LT_TAGVAR(lt_prog_compiler_pic, $1)" + fi + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + else + _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' + fi + ;; -# A language-specific compiler. -CC=$lt_[]_LT_AC_TAGVAR(compiler, $1) + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + m4_if([$1], [GCJ], [], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + ;; -# Is the compiler the GNU C compiler? -with_gcc=$_LT_AC_TAGVAR(GCC, $1) + hpux9* | hpux10* | hpux11*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + ;; -# An ERE matcher. -EGREP=$lt_EGREP + irix5* | irix6* | nonstopux*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # PIC (with -KPIC) is the default. + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; -# The linker used to build libraries. -LD=$lt_[]_LT_AC_TAGVAR(LD, $1) + linux* | k*bsd*-gnu | kopensolaris*-gnu) + case $cc_basename in + # old Intel for x86_64 which still supported -KPIC. + ecc*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + # icc used to be incompatible with GCC. + # ICC 10 doesn't accept -KPIC any more. + icc* | ifort*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + # Lahey Fortran 8.1. + lf95*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared' + _LT_TAGVAR(lt_prog_compiler_static, $1)='--static' + ;; + nagfor*) + # NAG Fortran compiler + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + ccc*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # All Alpha code is PIC. + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + xl* | bgxl* | bgf* | mpixl*) + # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [[1-7]].* | *Sun*Fortran*\ 8.[[0-3]]*) + # Sun Fortran 8.3 passes all unrecognized flags to the linker + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='' + ;; + *Sun\ F* | *Sun*Fortran*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + ;; + *Sun\ C*) + # Sun C 5.9 + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + ;; + *Intel*\ [[CF]]*Compiler*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + *Portland\ Group*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + esac + ;; + esac + ;; -# Whether we need hard or soft links. -LN_S=$lt_LN_S + newsos6) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; -# A BSD-compatible nm program. -NM=$lt_NM + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; -# A symbol stripping program -STRIP=$lt_STRIP + osf3* | osf4* | osf5*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # All OSF/1 code is PIC. + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; -# Used to examine libraries when file_magic_cmd begins "file" -MAGIC_CMD=$MAGIC_CMD + rdos*) + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; -# Used on cygwin: DLL creation program. -DLLTOOL="$DLLTOOL" + solaris*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + case $cc_basename in + f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; + *) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; + esac + ;; -# Used on cygwin: object dumper. -OBJDUMP="$OBJDUMP" + sunos4*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; -# Used on cygwin: assembler. -AS="$AS" + sysv4 | sysv4.2uw2* | sysv4.3*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; -# The name of the directory that contains temporary libtool files. -objdir=$objdir + sysv4*MP*) + if test -d /usr/nec ;then + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; -# How to pass a linker flag through the compiler. -wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) + unicos*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; -# Object file suffix (normally "o"). -objext="$ac_objext" + uts4*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; -# Old archive suffix (normally "a"). -libext="$libext" + *) + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + esac + fi +]) +case $host_os in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])" + ;; +esac -# Shared library suffix (normally ".so"). -shrext_cmds='$shrext_cmds' +AC_CACHE_CHECK([for $compiler option to produce PIC], + [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)], + [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)]) +_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1) -# Executable file suffix (normally ""). -exeext="$exeext" +# +# Check to make sure the PIC flag actually works. +# +if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then + _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works], + [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)], + [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [], + [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in + "" | " "*) ;; + *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;; + esac], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) +fi +_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1], + [Additional compiler flags for building library objects]) -# Additional compiler flags for building library objects. -pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) -pic_mode=$pic_mode +_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1], + [How to pass a linker flag through the compiler]) +# +# Check to make sure the static flag actually works. +# +wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\" +_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], + _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1), + $lt_tmp_static_flag, + [], + [_LT_TAGVAR(lt_prog_compiler_static, $1)=]) +_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1], + [Compiler flag to prevent dynamic linking]) +])# _LT_COMPILER_PIC -# What is the maximum length of a command? -max_cmd_len=$lt_cv_sys_max_cmd_len -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) +# _LT_LINKER_SHLIBS([TAGNAME]) +# ---------------------------- +# See if the linker supports building shared libraries. +m4_defun([_LT_LINKER_SHLIBS], +[AC_REQUIRE([LT_PATH_LD])dnl +AC_REQUIRE([LT_PATH_NM])dnl +m4_require([_LT_PATH_MANIFEST_TOOL])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_DECL_SED])dnl +m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl +m4_require([_LT_TAG_COMPILER])dnl +AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) +m4_if([$1], [CXX], [ + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] + case $host_os in + aix[[4-9]]*) + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + # Also, AIX nm treats weak defined symbols like other global defined + # symbols, whereas GNU nm marks them as "W". + if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + else + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + fi + ;; + pw32*) + _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" + ;; + cygwin* | mingw* | cegcc*) + case $cc_basename in + cl*) + _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' + ;; + *) + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' + _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] + ;; + esac + ;; + linux* | k*bsd*-gnu | gnu*) + _LT_TAGVAR(link_all_deplibs, $1)=no + ;; + *) + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + ;; + esac +], [ + runpath_var= + _LT_TAGVAR(allow_undefined_flag, $1)= + _LT_TAGVAR(always_export_symbols, $1)=no + _LT_TAGVAR(archive_cmds, $1)= + _LT_TAGVAR(archive_expsym_cmds, $1)= + _LT_TAGVAR(compiler_needs_object, $1)=no + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + _LT_TAGVAR(export_dynamic_flag_spec, $1)= + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + _LT_TAGVAR(hardcode_automatic, $1)=no + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_direct_absolute, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_TAGVAR(hardcode_libdir_separator, $1)= + _LT_TAGVAR(hardcode_minus_L, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + _LT_TAGVAR(inherit_rpath, $1)=no + _LT_TAGVAR(link_all_deplibs, $1)=unknown + _LT_TAGVAR(module_cmds, $1)= + _LT_TAGVAR(module_expsym_cmds, $1)= + _LT_TAGVAR(old_archive_from_new_cmds, $1)= + _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)= + _LT_TAGVAR(thread_safe_flag_spec, $1)= + _LT_TAGVAR(whole_archive_flag_spec, $1)= + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + _LT_TAGVAR(include_expsyms, $1)= + # exclude_expsyms can be an extended regexp of symbols to exclude + # it will be wrapped by ` (' and `)$', so one must not match beginning or + # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', + # as well as any symbol that contains `d'. + _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + # Exclude shared library initialization/finalization symbols. +dnl Note also adjust exclude_expsyms for C++ above. + extract_expsyms_cmds= -# Must we lock files when doing compilation? -need_locks=$lt_need_locks + case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + interix*) + # we just hope/assume this is gcc and not c89 (= MSVC++) + with_gnu_ld=yes + ;; + openbsd*) + with_gnu_ld=no + ;; + linux* | k*bsd*-gnu | gnu*) + _LT_TAGVAR(link_all_deplibs, $1)=no + ;; + esac -# Do we need the lib prefix for modules? -need_lib_prefix=$need_lib_prefix + _LT_TAGVAR(ld_shlibs, $1)=yes -# Do we need a version for libraries? -need_version=$need_version + # On some targets, GNU ld is compatible enough with the native linker + # that we're better off using the native interface for both. + lt_use_gnu_ld_interface=no + if test "$with_gnu_ld" = yes; then + case $host_os in + aix*) + # The AIX port of GNU ld has always aspired to compatibility + # with the native linker. However, as the warning in the GNU ld + # block says, versions before 2.19.5* couldn't really create working + # shared libraries, regardless of the interface used. + case `$LD -v 2>&1` in + *\ \(GNU\ Binutils\)\ 2.19.5*) ;; + *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;; + *\ \(GNU\ Binutils\)\ [[3-9]]*) ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + fi -# Whether dlopen is supported. -dlopen_support=$enable_dlopen + if test "$lt_use_gnu_ld_interface" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + runpath_var=LD_RUN_PATH + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then + _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + _LT_TAGVAR(whole_archive_flag_spec, $1)= + fi + supports_anon_versioning=no + case `$LD -v 2>&1` in + *GNU\ gold*) supports_anon_versioning=yes ;; + *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static + # See if GNU ld supports shared libraries. + case $host_os in + aix[[3-9]]*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + _LT_TAGVAR(ld_shlibs, $1)=no + cat <<_LT_EOF 1>&2 -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1) +*** Warning: the GNU linker, at least up to release 2.19, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to install binutils +*** 2.20 or above, or modify your PATH so that a non-GNU linker is found. +*** You will then need to restart the configuration process. -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) +_LT_EOF + fi + ;; -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1) + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='' + ;; + m68k) + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_minus_L, $1)=yes + ;; + esac + ;; -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1) + beos*) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; -# Compiler flag to generate thread-safe objects. -thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1) + cygwin* | mingw* | pw32* | cegcc*) + # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, + # as there is no search path for DLLs. + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=no + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' + _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] -# Library versioning type. -version_type=$version_type + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; -# Format of library name prefix. -libname_spec=$lt_libname_spec + haiku*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME. -library_names_spec=$lt_library_names_spec + interix[[3-9]]*) + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec + gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) + tmp_diet=no + if test "$host_os" = linux-dietlibc; then + case $cc_basename in + diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) + esac + fi + if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ + && test "$tmp_diet" = no + then + tmp_addflag=' $pic_flag' + tmp_sharedflag='-shared' + case $cc_basename,$host_cpu in + pgcc*) # Portland Group C compiler + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag' + ;; + pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group f77 and f90 compilers + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag -Mnomain' ;; + ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 + tmp_addflag=' -i_dynamic' ;; + efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 + tmp_addflag=' -i_dynamic -nofor_main' ;; + ifc* | ifort*) # Intel Fortran compiler + tmp_addflag=' -nofor_main' ;; + lf95*) # Lahey Fortran 8.1 + _LT_TAGVAR(whole_archive_flag_spec, $1)= + tmp_sharedflag='--shared' ;; + xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below) + tmp_sharedflag='-qmkshrobj' + tmp_addflag= ;; + nvcc*) # Cuda Compiler Driver 2.2 + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + _LT_TAGVAR(compiler_needs_object, $1)=yes + ;; + esac + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) # Sun C 5.9 + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + _LT_TAGVAR(compiler_needs_object, $1)=yes + tmp_sharedflag='-G' ;; + *Sun\ F*) # Sun Fortran 8.3 + tmp_sharedflag='-G' ;; + esac + _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -# Commands used to build and install an old-style archive. -RANLIB=$lt_RANLIB -old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1) -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds + if test "x$supports_anon_versioning" = xyes; then + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1) + case $cc_basename in + xlf* | bgf* | bgxlf* | mpixlf*) + # IBM XL Fortran 10.1 on PPC cannot create shared libs itself + _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' + if test "x$supports_anon_versioning" = xyes; then + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' + fi + ;; + esac + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) + netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; -# Commands used to build and install a shared archive. -archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1) -archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1) -postinstall_cmds=$lt_postinstall_cmds -postuninstall_cmds=$lt_postuninstall_cmds + solaris*) + if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then + _LT_TAGVAR(ld_shlibs, $1)=no + cat <<_LT_EOF 1>&2 -# Commands used to build a loadable module (assumed same as above if empty) -module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1) -module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1) +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib +_LT_EOF + elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; -# Dependencies to place before the objects being linked to create a -# shared library. -predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1) + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) + case `$LD -v 2>&1` in + *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) + _LT_TAGVAR(ld_shlibs, $1)=no + cat <<_LT_EOF 1>&2 -# Dependencies to place after the objects being linked to create a -# shared library. -postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1) +*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not +*** reliably create shared libraries on SCO systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.16.91.0.3 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. -# Dependencies to place before the objects being linked to create a -# shared library. -predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1) +_LT_EOF + ;; + *) + # For security reasons, it is highly recommended that you always + # use absolute paths for naming shared libraries, and exclude the + # DT_RUNPATH tag from executables and libraries. But doing so + # requires that you compile everything twice, which is a pain. + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; -# Dependencies to place after the objects being linked to create a -# shared library. -postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1) + sunos4*) + _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; -# The library search path used internally by the compiler when linking -# a shared library. -compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1) + *) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method + if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then + runpath_var= + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_TAGVAR(export_dynamic_flag_spec, $1)= + _LT_TAGVAR(whole_archive_flag_spec, $1)= + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=yes + _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + _LT_TAGVAR(hardcode_minus_L, $1)=yes + if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + _LT_TAGVAR(hardcode_direct, $1)=unsupported + fi + ;; -# Command to use when deplibs_check_method == file_magic. -file_magic_cmd=$lt_file_magic_cmd + aix[[4-9]]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + # Also, AIX nm treats weak defined symbols like other global + # defined symbols, whereas GNU nm marks them as "W". + if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + else + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + fi + aix_use_runtimelinking=no -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1) + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + ;; + esac -# Flag that forces no undefined symbols. -no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1) + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. -# Same as above, but a single script fragment to be evaled but not shown. -finish_eval=$lt_finish_eval + _LT_TAGVAR(archive_cmds, $1)='' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + if test "$GCC" = yes; then + case $host_os in aix4.[[012]]|aix4.[[012]].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && + strings "$collect2name" | $GREP resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + _LT_TAGVAR(hardcode_direct, $1)=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)= + fi + ;; + esac + shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi + _LT_TAGVAR(link_all_deplibs, $1)=no + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi -# Transform the output of nm in a proper C declaration -global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + _LT_TAGVAR(always_export_symbols, $1)=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + _LT_TAGVAR(allow_undefined_flag, $1)='-berok' + # Determine the default libpath from the value encoded in an + # empty executable. + _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' + _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" + _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an + # empty executable. + _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' + if test "$with_gnu_ld" = yes; then + # We only use this code for GNU lds that support --whole-archive. + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + else + # Exported symbols can be pulled into shared objects from archives + _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)=yes + # This is similar to how AIX traditionally builds its shared libraries. + _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; -# Transform the output of nm in a C name address pair -global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='' + ;; + m68k) + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_minus_L, $1)=yes + ;; + esac + ;; -# This is the shared library runtime path variable. -runpath_var=$runpath_var + bsdi[[45]]*) + _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic + ;; -# This is the shared library path variable. -shlibpath_var=$shlibpath_var + cygwin* | mingw* | pw32* | cegcc*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + case $cc_basename in + cl*) + # Native MSVC + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=yes + _LT_TAGVAR(file_list_spec, $1)='@' + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' + _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; + else + sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; + fi~ + $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ + linknames=' + # The linker will not automatically build a static lib if we build a DLL. + # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' + # Don't use ranlib + _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' + _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ + lt_tool_outputfile="@TOOL_OUTPUT@"~ + case $lt_outputfile in + *.exe|*.EXE) ;; + *) + lt_outputfile="$lt_outputfile.exe" + lt_tool_outputfile="$lt_tool_outputfile.exe" + ;; + esac~ + if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then + $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; + $RM "$lt_outputfile.manifest"; + fi' + ;; + *) + # Assume MSVC wrapper + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' + # FIXME: Should let the user specify the lib program. + _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + ;; + esac + ;; -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath + darwin* | rhapsody*) + _LT_DARWIN_LINKER_FEATURES($1) + ;; -# How to hardcode a shared library path into an executable. -hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1) + dgux*) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2.*) + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; -# If ld is used when linking, flag to hardcode \$libdir into -# a binary during linking. This must work even if \$libdir does -# not exist. -hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | dragonfly*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1) + hpux9*) + if test "$GCC" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + fi + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(hardcode_direct, $1)=yes -# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the -# resulting binary. -hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1) + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + ;; -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1) + hpux10*) + if test "$GCC" = yes && test "$with_gnu_ld" = no; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + fi + if test "$with_gnu_ld" = no; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_TAGVAR(hardcode_minus_L, $1)=yes + fi + ;; -# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into -# the resulting binary. -hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1) + hpux11*) + if test "$GCC" = yes && test "$with_gnu_ld" = no; then + case $host_cpu in + hppa*64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else + case $host_cpu in + hppa*64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + m4_if($1, [], [ + # Older versions of the 11.00 compiler do not understand -b yet + # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) + _LT_LINKER_OPTION([if $CC understands -b], + _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b], + [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'], + [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])], + [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags']) + ;; + esac + fi + if test "$with_gnu_ld" = no; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: -# Set to yes if building a shared library automatically hardcodes DIR into the library -# and all subsequent libraries and executables linked against it. -hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1) + case $host_cpu in + hppa*64*|ia64*) + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + *) + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' -# Variables whose values should be saved in libtool wrapper scripts and -# restored at relink time. -variables_saved_for_relink="$variables_saved_for_relink" + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_TAGVAR(hardcode_minus_L, $1)=yes + ;; + esac + fi + ;; -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1) + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + # Try to use the -exported_symbol ld option, if it does not + # work, assume that -exports_file does not work either and + # implicitly export all symbols. + # This should be the same for all languages, so no per-tag cache variable. + AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol], + [lt_cv_irix_exported_symbol], + [save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" + AC_LINK_IFELSE( + [AC_LANG_SOURCE( + [AC_LANG_CASE([C], [[int foo (void) { return 0; }]], + [C++], [[int foo (void) { return 0; }]], + [Fortran 77], [[ + subroutine foo + end]], + [Fortran], [[ + subroutine foo + end]])])], + [lt_cv_irix_exported_symbol=yes], + [lt_cv_irix_exported_symbol=no]) + LDFLAGS="$save_LDFLAGS"]) + if test "$lt_cv_irix_exported_symbol" = yes; then + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' + fi + else + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)='no' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(inherit_rpath, $1)=yes + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; -# Compile-time system search path for libraries -sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; -# Run-time system search path for libraries -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + newsos6) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; -# Fix the shell variable \$srcfile for the compiler. -fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)" + *nto* | *qnx*) + ;; -# Set to yes if exported symbols are required. -always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1) + openbsd*) + if test -f /usr/libexec/ld.so; then + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + else + case $host_os in + openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + ;; + esac + fi + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; -# The commands to list exported symbols. -export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1) + os2*) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + ;; -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds + osf3*) + if test "$GCC" = yes; then + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)='no' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + ;; -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1) + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + else + _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ + $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' -# Symbols that must always be exported. -include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1) + # Both c and cxx compiler support -rpath directly + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)='no' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + ;; -ifelse([$1],[], -[# ### END LIBTOOL CONFIG], -[# ### END LIBTOOL TAG CONFIG: $tagname]) + solaris*) + _LT_TAGVAR(no_undefined_flag, $1)=' -z defs' + if test "$GCC" = yes; then + wlarc='${wl}' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + else + case `$CC -V 2>&1` in + *"Compilers 5.0"*) + wlarc='' + _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' + ;; + *) + wlarc='${wl}' + _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + ;; + esac + fi + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) + # The compiler driver will combine and reorder linker options, + # but understands `-z linker_flag'. GCC discards it without `$wl', + # but is careful enough not to reorder. + # Supported since Solaris 2.6 (maybe 2.5.1?) + if test "$GCC" = yes; then + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + else + _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' + fi + ;; + esac + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; -__EOF__ + sunos4*) + if test "x$host_vendor" = xsequent; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; -ifelse([$1],[], [ - case $host_os in - aix3*) - cat <<\EOF >> "$cfgfile" + sysv4) + case $host_vendor in + sni) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true??? + ;; + siemens) + ## LD is ld it makes a PLAMLIB + ## CC just makes a GrossModule. + _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' + _LT_TAGVAR(hardcode_direct, $1)=no + ;; + motorola) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie + ;; + esac + runpath_var='LD_RUN_PATH' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; -# AIX sometimes has problems with the GCC collect2 program. For some -# reason, if we set the COLLECT_NAMES environment variable, the problems -# vanish in a puff of smoke. -if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES -fi -EOF - ;; - esac - - # We use sed instead of cat because bash on DJGPP gets confused if - # if finds mixed CR/LF and LF-only lines. Since sed operates in - # text mode, it properly converts lines to CR/LF. This bash problem - # is reportedly fixed, but why not run on old versions too? - sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1) - - mv -f "$cfgfile" "$ofile" || \ - (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") - chmod +x "$ofile" -]) -else - # If there is no Makefile yet, we rely on a make rule to execute - # `config.status --recheck' to rerun these tests and create the - # libtool script then. - ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` - if test -f "$ltmain_in"; then - test -f Makefile && make "$ltmain" - fi -fi -])# AC_LIBTOOL_CONFIG + sysv4.3*) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' + ;; + sysv4*MP*) + if test -d /usr/nec; then + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + _LT_TAGVAR(ld_shlibs, $1)=yes + fi + ;; -# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME]) -# ------------------------------------------- -AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], -[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) + _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var='LD_RUN_PATH' -_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= + if test "$GCC" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; -if test "$GCC" = yes; then - _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' + runpath_var='LD_RUN_PATH' - AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], - lt_cv_prog_compiler_rtti_exceptions, - [-fno-rtti -fno-exceptions], [], - [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) -fi -])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI + if test "$GCC" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + uts4*) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; -# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE -# --------------------------------- -AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], -[AC_REQUIRE([AC_CANONICAL_HOST]) -AC_REQUIRE([AC_PROG_NM]) -AC_REQUIRE([AC_OBJEXT]) -# Check for command to grab the raw symbol name followed by C symbol from nm. -AC_MSG_CHECKING([command to parse $NM output from $compiler object]) -AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], -[ -# These are sane defaults that work on at least a few old systems. -# [They come from Ultrix. What could be older than Ultrix?!! ;)] + *) + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac -# Character class describing NM global symbol codes. -symcode='[[BCDEGRST]]' + if test x$host_vendor = xsni; then + case $host in + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym' + ;; + esac + fi + fi +]) +AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) +test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no -# Regexp to match symbols that can be accessed directly from C. -sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' +_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld -# Transform an extracted symbol line into a proper C declaration -lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'" +_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl +_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl +_LT_DECL([], [extract_expsyms_cmds], [2], + [The commands to extract the exported symbol list from a shared archive]) -# Transform an extracted symbol line into symbol name and symbol address -lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" +# +# Do we need to explicitly link libc? +# +case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in +x|xyes) + # Assume -lc should be added + _LT_TAGVAR(archive_cmds_need_lc, $1)=yes -# Define system-specific variables. -case $host_os in -aix*) - symcode='[[BCDT]]' - ;; -cygwin* | mingw* | pw32*) - symcode='[[ABCDGISTW]]' - ;; -hpux*) # Its linker distinguishes data from code symbols - if test "$host_cpu" = ia64; then - symcode='[[ABCDEGRST]]' - fi - lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" - lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" - ;; -linux*) - if test "$host_cpu" = ia64; then - symcode='[[ABCDGIRSTW]]' - lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" - lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + if test "$enable_shared" = yes && test "$GCC" = yes; then + case $_LT_TAGVAR(archive_cmds, $1) in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + AC_CACHE_CHECK([whether -lc should be explicitly linked in], + [lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1), + [$RM conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + if AC_TRY_EVAL(ac_compile) 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) + pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1) + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1) + _LT_TAGVAR(allow_undefined_flag, $1)= + if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) + then + lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no + else + lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes + fi + _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $RM conftest* + ]) + _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1) + ;; + esac fi ;; -irix* | nonstopux*) - symcode='[[BCDEGRST]]' - ;; -osf*) - symcode='[[BCDEGQRST]]' - ;; -solaris* | sysv5*) - symcode='[[BDRT]]' - ;; -sysv4) - symcode='[[DFNSTU]]' - ;; esac -# Handle CRLF in mingw tool chain -opt_cr= -case $build_os in -mingw*) - opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp - ;; -esac +_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0], + [Whether or not to add -lc for building shared libraries]) +_LT_TAGDECL([allow_libtool_libs_with_static_runtimes], + [enable_shared_with_static_runtimes], [0], + [Whether or not to disallow shared libs when runtime libs are static]) +_LT_TAGDECL([], [export_dynamic_flag_spec], [1], + [Compiler flag to allow reflexive dlopens]) +_LT_TAGDECL([], [whole_archive_flag_spec], [1], + [Compiler flag to generate shared objects directly from archives]) +_LT_TAGDECL([], [compiler_needs_object], [1], + [Whether the compiler copes with passing no objects directly]) +_LT_TAGDECL([], [old_archive_from_new_cmds], [2], + [Create an old-style archive from a shared archive]) +_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2], + [Create a temporary old-style archive to link instead of a shared archive]) +_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive]) +_LT_TAGDECL([], [archive_expsym_cmds], [2]) +_LT_TAGDECL([], [module_cmds], [2], + [Commands used to build a loadable module if different from building + a shared archive.]) +_LT_TAGDECL([], [module_expsym_cmds], [2]) +_LT_TAGDECL([], [with_gnu_ld], [1], + [Whether we are building with GNU ld or not]) +_LT_TAGDECL([], [allow_undefined_flag], [1], + [Flag that allows shared libraries with undefined symbols to be built]) +_LT_TAGDECL([], [no_undefined_flag], [1], + [Flag that enforces no undefined symbols]) +_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1], + [Flag to hardcode $libdir into a binary during linking. + This must work even if $libdir does not exist]) +_LT_TAGDECL([], [hardcode_libdir_separator], [1], + [Whether we need a single "-rpath" flag with a separated argument]) +_LT_TAGDECL([], [hardcode_direct], [0], + [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes + DIR into the resulting binary]) +_LT_TAGDECL([], [hardcode_direct_absolute], [0], + [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes + DIR into the resulting binary and the resulting library dependency is + "absolute", i.e impossible to change by setting ${shlibpath_var} if the + library is relocated]) +_LT_TAGDECL([], [hardcode_minus_L], [0], + [Set to "yes" if using the -LDIR flag during linking hardcodes DIR + into the resulting binary]) +_LT_TAGDECL([], [hardcode_shlibpath_var], [0], + [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR + into the resulting binary]) +_LT_TAGDECL([], [hardcode_automatic], [0], + [Set to "yes" if building a shared library automatically hardcodes DIR + into the library and all subsequent libraries and executables linked + against it]) +_LT_TAGDECL([], [inherit_rpath], [0], + [Set to yes if linker adds runtime paths of dependent libraries + to runtime path list]) +_LT_TAGDECL([], [link_all_deplibs], [0], + [Whether libtool must link a program against all its dependency libraries]) +_LT_TAGDECL([], [always_export_symbols], [0], + [Set to "yes" if exported symbols are required]) +_LT_TAGDECL([], [export_symbols_cmds], [2], + [The commands to list exported symbols]) +_LT_TAGDECL([], [exclude_expsyms], [1], + [Symbols that should not be listed in the preloaded symbols]) +_LT_TAGDECL([], [include_expsyms], [1], + [Symbols that must always be exported]) +_LT_TAGDECL([], [prelink_cmds], [2], + [Commands necessary for linking programs (against libraries) with templates]) +_LT_TAGDECL([], [postlink_cmds], [2], + [Commands necessary for finishing linking programs]) +_LT_TAGDECL([], [file_list_spec], [1], + [Specify filename containing input files]) +dnl FIXME: Not yet implemented +dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1], +dnl [Compiler flag to generate thread safe objects]) +])# _LT_LINKER_SHLIBS -# If we're using GNU nm, then use its standard symbol codes. -case `$NM -V 2>&1` in -*GNU* | *'with BFD'*) - symcode='[[ABCDGIRSTW]]' ;; -esac -# Try without a prefix undercore, then with it. -for ac_symprfx in "" "_"; do +# _LT_LANG_C_CONFIG([TAG]) +# ------------------------ +# Ensure that the configuration variables for a C compiler are suitably +# defined. These variables are subsequently used by _LT_CONFIG to write +# the compiler configuration to `libtool'. +m4_defun([_LT_LANG_C_CONFIG], +[m4_require([_LT_DECL_EGREP])dnl +lt_save_CC="$CC" +AC_LANG_PUSH(C) - # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. - symxfrm="\\1 $ac_symprfx\\2 \\2" +# Source file extension for C test sources. +ac_ext=c - # Write the raw and C identifiers. - lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" +# Object file extension for compiled C test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext - # Check to see that the pipe works correctly. - pipe_works=no +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;" - rm -f conftest* - cat > conftest.$ac_ext < $nlist) && test -s "$nlist"; then - # Try sorting and uniquifying the output. - if sort "$nlist" | uniq > "$nlist"T; then - mv -f "$nlist"T "$nlist" - else - rm -f "$nlist"T - fi +_LT_TAG_COMPILER +# Save the default compiler, since it gets overwritten when the other +# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. +compiler_DEFAULT=$CC - # Make sure that we snagged all the symbols we need. - if grep ' nm_test_var$' "$nlist" >/dev/null; then - if grep ' nm_test_func$' "$nlist" >/dev/null; then - cat < conftest.$ac_ext -#ifdef __cplusplus -extern "C" { -#endif +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE -EOF - # Now generate the symbol file. - eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext' +if test -n "$compiler"; then + _LT_COMPILER_NO_RTTI($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + LT_SYS_DLOPEN_SELF + _LT_CMD_STRIPLIB + + # Report which library types will actually be built + AC_MSG_CHECKING([if libtool supports shared libraries]) + AC_MSG_RESULT([$can_build_shared]) - cat <> conftest.$ac_ext -#if defined (__STDC__) && __STDC__ -# define lt_ptr_t void * -#else -# define lt_ptr_t char * -# define const -#endif + AC_MSG_CHECKING([whether to build shared libraries]) + test "$can_build_shared" = "no" && enable_shared=no -/* The mapping between symbol names and symbols. */ -const struct { - const char *name; - lt_ptr_t address; -} -lt_preloaded_symbols[[]] = -{ -EOF - $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext - cat <<\EOF >> conftest.$ac_ext - {0, (lt_ptr_t) 0} -}; + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; -#ifdef __cplusplus -} -#endif -EOF - # Now try linking the two files. - mv conftest.$ac_objext conftstm.$ac_objext - lt_save_LIBS="$LIBS" - lt_save_CFLAGS="$CFLAGS" - LIBS="conftstm.$ac_objext" - CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" - if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then - pipe_works=yes - fi - LIBS="$lt_save_LIBS" - CFLAGS="$lt_save_CFLAGS" - else - echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD - fi - else - echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD - fi - else - echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD + aix[[4-9]]*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no fi - else - echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD - cat conftest.$ac_ext >&5 - fi - rm -f conftest* conftst* + ;; + esac + AC_MSG_RESULT([$enable_shared]) - # Do not use the global_symbol_pipe unless it works. - if test "$pipe_works" = yes; then - break - else - lt_cv_sys_global_symbol_pipe= - fi -done -]) -if test -z "$lt_cv_sys_global_symbol_pipe"; then - lt_cv_sys_global_symbol_to_cdecl= + AC_MSG_CHECKING([whether to build static libraries]) + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes + AC_MSG_RESULT([$enable_static]) + + _LT_CONFIG($1) fi -if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then - AC_MSG_RESULT(failed) +AC_LANG_POP +CC="$lt_save_CC" +])# _LT_LANG_C_CONFIG + + +# _LT_LANG_CXX_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for a C++ compiler are suitably +# defined. These variables are subsequently used by _LT_CONFIG to write +# the compiler configuration to `libtool'. +m4_defun([_LT_LANG_CXX_CONFIG], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_PATH_MANIFEST_TOOL])dnl +if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + AC_PROG_CXXCPP else - AC_MSG_RESULT(ok) + _lt_caught_CXX_error=yes fi -]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE +AC_LANG_PUSH(C++) +_LT_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_TAGVAR(allow_undefined_flag, $1)= +_LT_TAGVAR(always_export_symbols, $1)=no +_LT_TAGVAR(archive_expsym_cmds, $1)= +_LT_TAGVAR(compiler_needs_object, $1)=no +_LT_TAGVAR(export_dynamic_flag_spec, $1)= +_LT_TAGVAR(hardcode_direct, $1)=no +_LT_TAGVAR(hardcode_direct_absolute, $1)=no +_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= +_LT_TAGVAR(hardcode_libdir_separator, $1)= +_LT_TAGVAR(hardcode_minus_L, $1)=no +_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported +_LT_TAGVAR(hardcode_automatic, $1)=no +_LT_TAGVAR(inherit_rpath, $1)=no +_LT_TAGVAR(module_cmds, $1)= +_LT_TAGVAR(module_expsym_cmds, $1)= +_LT_TAGVAR(link_all_deplibs, $1)=unknown +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds +_LT_TAGVAR(no_undefined_flag, $1)= +_LT_TAGVAR(whole_archive_flag_spec, $1)= +_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no -# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME]) -# --------------------------------------- -AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC], -[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)= -_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= -_LT_AC_TAGVAR(lt_prog_compiler_static, $1)= +# Source file extension for C++ test sources. +ac_ext=cpp -AC_MSG_CHECKING([for $compiler option to produce PIC]) - ifelse([$1],[CXX],[ - # C++ specific cases for pic, static, wl, etc. - if test "$GXX" = yes; then - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' +# Object file extension for compiled C++ test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +# No sense in running all these tests if we already determined that +# the CXX compiler isn't working. Some variables (like enable_shared) +# are currently assumed to apply to all compilers on this platform, +# and will be corrupted by setting them based on a non-working compiler. +if test "$_lt_caught_CXX_error" != yes; then + # Code to be used in simple compile tests + lt_simple_compile_test_code="int some_variable = 0;" + + # Code to be used in simple link tests + lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }' + + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + _LT_TAG_COMPILER + + # save warnings/boilerplate of simple test code + _LT_COMPILER_BOILERPLATE + _LT_LINKER_BOILERPLATE + + # Allow CC to be a program name with arguments. + lt_save_CC=$CC + lt_save_CFLAGS=$CFLAGS + lt_save_LD=$LD + lt_save_GCC=$GCC + GCC=$GXX + lt_save_with_gnu_ld=$with_gnu_ld + lt_save_path_LD=$lt_cv_path_LD + if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then + lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx + else + $as_unset lt_cv_prog_gnu_ld + fi + if test -n "${lt_cv_path_LDCXX+set}"; then + lt_cv_path_LD=$lt_cv_path_LDCXX + else + $as_unset lt_cv_path_LD + fi + test -z "${LDCXX+set}" || LD=$LDCXX + CC=${CXX-"c++"} + CFLAGS=$CXXFLAGS + compiler=$CC + _LT_TAGVAR(compiler, $1)=$CC + _LT_CC_BASENAME([$compiler]) + + if test -n "$compiler"; then + # We don't want -fno-exception when compiling C++ code, so set the + # no_builtin_flag separately + if test "$GXX" = yes; then + _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' + else + _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= + fi + + if test "$GXX" = yes; then + # Set up default GNU C++ configuration + + LT_PATH_LD + + # Check if GNU C++ uses GNU ld as the underlying linker, since the + # archiving commands below assume that GNU ld is being used. + if test "$with_gnu_ld" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + + # If archive_cmds runs LD, not CC, wlarc should be empty + # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to + # investigate it a little bit more. (MM) + wlarc='${wl}' + + # ancient GNU ld didn't support --whole-archive et. al. + if eval "`$CC -print-prog-name=ld` --help 2>&1" | + $GREP 'no-whole-archive' > /dev/null; then + _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + _LT_TAGVAR(whole_archive_flag_spec, $1)= + fi + else + with_gnu_ld=no + wlarc= + + # A generic and very simple default shared library creation + # command for GNU C++ for the case where it uses the native + # linker, instead of GNU ld. If possible, this setting should + # overridden to take advantage of the native linker features on + # the platform it is being used on. + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' fi - ;; - amigaos*) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' - ;; - beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - mingw* | os2* | pw32*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' - ;; - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' - ;; - *djgpp*) - # DJGPP does not support shared libraries at all - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= - ;; - sysv4*MP*) - if test -d /usr/nec; then - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic - fi - ;; - hpux*) - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - ;; - *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - ;; - *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - else + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + + else + GXX=no + with_gnu_ld=no + wlarc= + fi + + # PORTME: fill in a description of your system's C++ link characteristics + AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) + _LT_TAGVAR(ld_shlibs, $1)=yes case $host_os in - aix4* | aix5*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + aix3*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + aix[[4-9]]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) + for ld_flag in $LDFLAGS; do + case $ld_flag in + *-brtl*) + aix_use_runtimelinking=yes + break + ;; + esac + done + ;; + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + _LT_TAGVAR(archive_cmds, $1)='' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' + + if test "$GXX" = yes; then + case $host_os in aix4.[[012]]|aix4.[[012]].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && + strings "$collect2name" | $GREP resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + _LT_TAGVAR(hardcode_direct, $1)=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)= + fi + esac + shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to + # export. + _LT_TAGVAR(always_export_symbols, $1)=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + _LT_TAGVAR(allow_undefined_flag, $1)='-berok' + # Determine the default libpath from the value encoded in an empty + # executable. + _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' + _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" + _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an + # empty executable. + _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' + if test "$with_gnu_ld" = yes; then + # We only use this code for GNU lds that support --whole-archive. + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + else + # Exported symbols can be pulled into shared objects from archives + _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)=yes + # This is similar to how AIX traditionally builds its shared + # libraries. + _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + + beos*) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' + _LT_TAGVAR(ld_shlibs, $1)=no fi ;; + chorus*) - case $cc_basename in - cxch68*) - # Green Hills C++ Compiler - # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" + case $cc_basename in + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + cygwin* | mingw* | pw32* | cegcc*) + case $GXX,$cc_basename in + ,cl* | no,cl*) + # Native MSVC + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=yes + _LT_TAGVAR(file_list_spec, $1)='@' + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' + _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; + else + $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; + fi~ + $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ + linknames=' + # The linker will not automatically build a static lib if we build a DLL. + # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + # Don't use ranlib + _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' + _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ + lt_tool_outputfile="@TOOL_OUTPUT@"~ + case $lt_outputfile in + *.exe|*.EXE) ;; + *) + lt_outputfile="$lt_outputfile.exe" + lt_tool_outputfile="$lt_tool_outputfile.exe" + ;; + esac~ + func_to_tool_file "$lt_outputfile"~ + if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then + $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; + $RM "$lt_outputfile.manifest"; + fi' + ;; + *) + # g++ + # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, + # as there is no search path for DLLs. + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=no + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi ;; esac ;; - darwin*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - case $cc_basename in - xlc*) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon' - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - ;; - esac - ;; + darwin* | rhapsody*) + _LT_DARWIN_LINKER_FEATURES($1) + ;; + dgux*) - case $cc_basename in - ec++*) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + case $cc_basename in + ec++*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no ;; - ghcx*) + ghcx*) # Green Hills C++ Compiler - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no ;; - *) + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no ;; - esac - ;; - freebsd* | kfreebsd*-gnu | dragonfly*) - # FreeBSD uses GNU C++ - ;; - hpux9* | hpux10* | hpux11*) - case $cc_basename in - CC*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" - if test "$host_cpu" != ia64; then - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' - fi + esac + ;; + + freebsd2.*) + # C++ shared libraries reported to be fairly broken before + # switch to ELF + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + freebsd-elf*) + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + ;; + + freebsd* | dragonfly*) + # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF + # conventions + _LT_TAGVAR(ld_shlibs, $1)=yes + ;; + + gnu*) + ;; + + haiku*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + + hpux9*) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, + # but as the default + # location of the library. + + case $cc_basename in + CC*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + aCC*) + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + ;; + *) + if test "$GXX" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + + hpux10*|hpux11*) + if test $with_gnu_ld = no; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + case $host_cpu in + hppa*64*|ia64*) + ;; + *) + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + ;; + esac + fi + case $host_cpu in + hppa*64*|ia64*) + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + *) + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, + # but as the default + # location of the library. + ;; + esac + + case $cc_basename in + CC*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no ;; - aCC*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" + aCC*) case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' - ;; + hppa*64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + ia64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; esac + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' ;; - *) + *) + if test "$GXX" = yes; then + if test $with_gnu_ld = no; then + case $host_cpu in + hppa*64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + ia64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + esac + fi + else + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + fi ;; - esac - ;; - irix5* | irix6* | nonstopux*) - case $cc_basename in - CC*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - # CC pic flag -KPIC is the default. + esac + ;; + + interix[[3-9]]*) + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + irix5* | irix6*) + case $cc_basename in + CC*) + # SGI C++ + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + + # Archives containing C++ object files must be created using + # "CC -ar", where "CC" is the IRIX C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' ;; - *) + *) + if test "$GXX" = yes; then + if test "$with_gnu_ld" = no; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib' + fi + fi + _LT_TAGVAR(link_all_deplibs, $1)=yes ;; - esac - ;; - linux*) - case $cc_basename in - KCC*) - # KAI C++ Compiler - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + esac + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(inherit_rpath, $1)=yes + ;; + + linux* | k*bsd*-gnu | kopensolaris*-gnu) + case $cc_basename in + KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + + # Archives containing C++ object files must be created using + # "CC -Bstatic", where "CC" is the KAI C++ compiler. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; - icpc* | ecpc*) + icpc* | ecpc* ) # Intel C++ - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' - ;; - pgCC*) - # Portland Group C++ compiler. - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + with_gnu_ld=yes + # version 8.0 and above of icpc choke on multiply defined symbols + # if we add $predep_objects and $postdep_objects, however 7.1 and + # earlier do not add the objects themselves. + case `$CC -V 2>&1` in + *"Version 7."*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + ;; + *) # Version 8.0 or newer + tmp_idyn= + case $host_cpu in + ia64*) tmp_idyn=' -i_dynamic';; + esac + _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + ;; + esac + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' ;; + pgCC* | pgcpp*) + # Portland Group C++ compiler + case `$CC -V` in + *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*) + _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ + compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"' + _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ + $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~ + $RANLIB $oldlib' + _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ + $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ + $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' + ;; + *) # Version 6 and above use weak symbols + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' + ;; + esac + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + ;; cxx*) # Compaq C++ - # Make sure the PIC flag is empty. It appears that all Alpha - # Linux and Compaq Tru64 Unix objects are PIC. - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' + + runpath_var=LD_RUN_PATH + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed' + ;; + xl* | mpixl* | bgxl*) + # IBM XL 8.0 on PPC, with GNU ld + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + if test "x$supports_anon_versioning" = xyes; then + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi ;; *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C++ 5.9 + _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' + _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + _LT_TAGVAR(compiler_needs_object, $1)=yes + + # Not sure whether something based on + # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 + # would be better. + output_verbose_link_cmd='func_echo_all' + + # Archives containing C++ object files must be created using + # "CC -xar", where "CC" is the Sun C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' + ;; + esac ;; esac ;; + lynxos*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no ;; + m88k*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no ;; + mvs*) - case $cc_basename in - cxx*) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' + case $cc_basename in + cxx*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no ;; *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no ;; esac ;; + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' + wlarc= + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + fi + # Workaround some broken pre-1.5 toolchains + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' ;; + + *nto* | *qnx*) + _LT_TAGVAR(ld_shlibs, $1)=yes + ;; + + openbsd2*) + # C++ shared libraries are fairly broken + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + openbsd*) + if test -f /usr/libexec/ld.so; then + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + fi + output_verbose_link_cmd=func_echo_all + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + osf3* | osf4* | osf5*) - case $cc_basename in - KCC*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' + case $cc_basename in + KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Archives containing C++ object files must be created using + # the KAI C++ compiler. + case $host in + osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; + *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;; + esac ;; - RCC*) + RCC*) # Rational C++ 2.4.1 - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no ;; - cxx*) - # Digital/Compaq C++ - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # Make sure the PIC flag is empty. It appears that all Alpha - # Linux and Compaq Tru64 Unix objects are PIC. - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + cxx*) + case $host in + osf3*) + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + ;; + *) + _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ + echo "-hidden">> $lib.exp~ + $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~ + $RM $lib.exp' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + ;; + esac + + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' ;; *) + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + case $host in + osf3*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + ;; + esac + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + + else + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + fi ;; - esac - ;; + esac + ;; + psos*) - ;; - sco*) - case $cc_basename in - CC*) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + sunos4*) + case $cc_basename in + CC*) + # Sun C++ 4.x + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no ;; - *) + lcc*) + # Lucid + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no ;; - esac - ;; + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + solaris*) - case $cc_basename in - CC*) + case $cc_basename in + CC* | sunCC*) # Sun C++ 4.2, 5.x and Centerline C++ - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + _LT_TAGVAR(archive_cmds_need_lc,$1)=yes + _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' + _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) + # The compiler driver will combine and reorder linker options, + # but understands `-z linker_flag'. + # Supported since Solaris 2.6 (maybe 2.5.1?) + _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' + ;; + esac + _LT_TAGVAR(link_all_deplibs, $1)=yes + + output_verbose_link_cmd='func_echo_all' + + # Archives containing C++ object files must be created using + # "CC -xar", where "CC" is the Sun C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' ;; - gcx*) + gcx*) # Green Hills C++ Compiler - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + + # The C++ compiler must be used to create the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' ;; - *) + *) + # GNU C++ compiler with Solaris linker + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' + if $CC --version | $GREP -v '^2\.7' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + else + # g++ 2.7 appears to require `-G' NOT `-shared' on this + # platform. + _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + fi + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + ;; + esac + fi ;; - esac - ;; - sunos4*) + esac + ;; + + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) + _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var='LD_RUN_PATH' + + case $cc_basename in + CC*) + _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + ;; + + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' + runpath_var='LD_RUN_PATH' + case $cc_basename in - CC*) - # Sun C++ 4.x - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - lcc*) - # Lucid - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + CC*) + _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~ + '"$_LT_TAGVAR(old_archive_cmds, $1)" + _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~ + '"$_LT_TAGVAR(reload_cmds, $1)" ;; *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; esac - ;; + ;; + tandem*) - case $cc_basename in - NCC*) + case $cc_basename in + NCC*) # NonStop-UX NCC 3.20 - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no ;; - *) + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no ;; - esac - ;; - unixware*) - ;; + esac + ;; + vxworks*) - ;; + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + *) - _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - ;; + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; esac - fi -], -[ - if test "$GCC" = yes; then - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - fi + AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) + test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no + + _LT_TAGVAR(GCC, $1)="$GXX" + _LT_TAGVAR(LD, $1)="$LD" + + ## CAVEAT EMPTOR: + ## There is no encapsulation within the following macros, do not change + ## the running order or otherwise move them around unless you know exactly + ## what you are doing... + _LT_SYS_HIDDEN_LIBDEPS($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) + fi # test -n "$compiler" + + CC=$lt_save_CC + CFLAGS=$lt_save_CFLAGS + LDCXX=$LD + LD=$lt_save_LD + GCC=$lt_save_GCC + with_gnu_ld=$lt_save_with_gnu_ld + lt_cv_path_LDCXX=$lt_cv_path_LD + lt_cv_path_LD=$lt_save_path_LD + lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld + lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld +fi # test "$_lt_caught_CXX_error" != yes + +AC_LANG_POP +])# _LT_LANG_CXX_CONFIG + + +# _LT_FUNC_STRIPNAME_CNF +# ---------------------- +# func_stripname_cnf prefix suffix name +# strip PREFIX and SUFFIX off of NAME. +# PREFIX and SUFFIX must not contain globbing or regex special +# characters, hashes, percent signs, but SUFFIX may contain a leading +# dot (in which case that matches only a dot). +# +# This function is identical to the (non-XSI) version of func_stripname, +# except this one can be used by m4 code that may be executed by configure, +# rather than the libtool script. +m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl +AC_REQUIRE([_LT_DECL_SED]) +AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH]) +func_stripname_cnf () +{ + case ${2} in + .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; + *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; + esac +} # func_stripname_cnf +])# _LT_FUNC_STRIPNAME_CNF + +# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME]) +# --------------------------------- +# Figure out "hidden" library dependencies from verbose +# compiler output when linking a shared library. +# Parse the compiler output and extract the necessary +# objects, libraries and library flags. +m4_defun([_LT_SYS_HIDDEN_LIBDEPS], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl +# Dependencies to place before and after the object being linked: +_LT_TAGVAR(predep_objects, $1)= +_LT_TAGVAR(postdep_objects, $1)= +_LT_TAGVAR(predeps, $1)= +_LT_TAGVAR(postdeps, $1)= +_LT_TAGVAR(compiler_lib_search_path, $1)= + +dnl we can't use the lt_simple_compile_test_code here, +dnl because it contains code intended for an executable, +dnl not a library. It's possible we should let each +dnl tag define a new lt_????_link_test_code variable, +dnl but it's only used here... +m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF +int a; +void foo (void) { a = 0; } +_LT_EOF +], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF +class Foo +{ +public: + Foo (void) { a = 0; } +private: + int a; +}; +_LT_EOF +], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF + subroutine foo + implicit none + integer*4 a + a=0 + return + end +_LT_EOF +], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF + subroutine foo + implicit none + integer a + a=0 + return + end +_LT_EOF +], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF +public class foo { + private int a; + public void bar (void) { + a = 0; + } +}; +_LT_EOF +], [$1], [GO], [cat > conftest.$ac_ext <<_LT_EOF +package foo +func foo() { +} +_LT_EOF +]) + +_lt_libdeps_save_CFLAGS=$CFLAGS +case "$CC $CFLAGS " in #( +*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;; +*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;; +*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;; +esac + +dnl Parse the compiler output and extract the necessary +dnl objects, libraries and library flags. +if AC_TRY_EVAL(ac_compile); then + # Parse the compiler output and extract the necessary + # objects, libraries and library flags. + + # Sentinel used to keep track of whether or not we are before + # the conftest object file. + pre_test_object_deps_done=no + + for p in `eval "$output_verbose_link_cmd"`; do + case ${prev}${p} in + + -L* | -R* | -l*) + # Some compilers place space between "-{L,R}" and the path. + # Remove the space. + if test $p = "-L" || + test $p = "-R"; then + prev=$p + continue + fi + + # Expand the sysroot to ease extracting the directories later. + if test -z "$prev"; then + case $p in + -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;; + -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;; + -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;; + esac + fi + case $p in + =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;; + esac + if test "$pre_test_object_deps_done" = no; then + case ${prev} in + -L | -R) + # Internal compiler library paths should come after those + # provided the user. The postdeps already come after the + # user supplied libs so there is no need to process them. + if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then + _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}" + else + _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}" + fi + ;; + # The "-l" case would never come before the object being + # linked, so don't bother handling this case. + esac + else + if test -z "$_LT_TAGVAR(postdeps, $1)"; then + _LT_TAGVAR(postdeps, $1)="${prev}${p}" + else + _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}" + fi + fi + prev= + ;; + + *.lto.$objext) ;; # Ignore GCC LTO objects + *.$objext) + # This assumes that the test object file only shows up + # once in the compiler output. + if test "$p" = "conftest.$objext"; then + pre_test_object_deps_done=yes + continue + fi + + if test "$pre_test_object_deps_done" = no; then + if test -z "$_LT_TAGVAR(predep_objects, $1)"; then + _LT_TAGVAR(predep_objects, $1)="$p" + else + _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p" + fi + else + if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then + _LT_TAGVAR(postdep_objects, $1)="$p" + else + _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p" + fi + fi + ;; + + *) ;; # Ignore the rest. + + esac + done + + # Clean up. + rm -f a.out a.exe +else + echo "libtool.m4: error: problem compiling $1 test program" +fi + +$RM -f confest.$objext +CFLAGS=$_lt_libdeps_save_CFLAGS + +# PORTME: override above test on systems where it is broken +m4_if([$1], [CXX], +[case $host_os in +interix[[3-9]]*) + # Interix 3.5 installs completely hosed .la files for C++, so rather than + # hack all around it, let's just trust "g++" to DTRT. + _LT_TAGVAR(predep_objects,$1)= + _LT_TAGVAR(postdep_objects,$1)= + _LT_TAGVAR(postdeps,$1)= + ;; + +linux*) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C++ 5.9 + + # The more standards-conforming stlport4 library is + # incompatible with the Cstd library. Avoid specifying + # it if it's in CXXFLAGS. Ignore libCrun as + # -library=stlport4 depends on it. + case " $CXX $CXXFLAGS " in + *" -library=stlport4 "*) + solaris_use_stlport4=yes ;; + esac - amigaos*) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + if test "$solaris_use_stlport4" != yes; then + _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' + fi + ;; + esac + ;; + +solaris*) + case $cc_basename in + CC* | sunCC*) + # The more standards-conforming stlport4 library is + # incompatible with the Cstd library. Avoid specifying + # it if it's in CXXFLAGS. Ignore libCrun as + # -library=stlport4 depends on it. + case " $CXX $CXXFLAGS " in + *" -library=stlport4 "*) + solaris_use_stlport4=yes ;; + esac + + # Adding this requires a known-good setup of shared libraries for + # Sun compiler versions before 5.6, else PIC objects from an old + # archive will be linked into the output, leading to subtle bugs. + if test "$solaris_use_stlport4" != yes; then + _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' + fi + ;; + esac + ;; +esac +]) + +case " $_LT_TAGVAR(postdeps, $1) " in +*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;; +esac + _LT_TAGVAR(compiler_lib_search_dirs, $1)= +if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then + _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` +fi +_LT_TAGDECL([], [compiler_lib_search_dirs], [1], + [The directories searched by this compiler when creating a shared library]) +_LT_TAGDECL([], [predep_objects], [1], + [Dependencies to place before and after the objects being linked to + create a shared library]) +_LT_TAGDECL([], [postdep_objects], [1]) +_LT_TAGDECL([], [predeps], [1]) +_LT_TAGDECL([], [postdeps], [1]) +_LT_TAGDECL([], [compiler_lib_search_path], [1], + [The library search path used internally by the compiler when linking + a shared library]) +])# _LT_SYS_HIDDEN_LIBDEPS + + +# _LT_LANG_F77_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for a Fortran 77 compiler are +# suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to `libtool'. +m4_defun([_LT_LANG_F77_CONFIG], +[AC_LANG_PUSH(Fortran 77) +if test -z "$F77" || test "X$F77" = "Xno"; then + _lt_disable_F77=yes +fi + +_LT_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_TAGVAR(allow_undefined_flag, $1)= +_LT_TAGVAR(always_export_symbols, $1)=no +_LT_TAGVAR(archive_expsym_cmds, $1)= +_LT_TAGVAR(export_dynamic_flag_spec, $1)= +_LT_TAGVAR(hardcode_direct, $1)=no +_LT_TAGVAR(hardcode_direct_absolute, $1)=no +_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= +_LT_TAGVAR(hardcode_libdir_separator, $1)= +_LT_TAGVAR(hardcode_minus_L, $1)=no +_LT_TAGVAR(hardcode_automatic, $1)=no +_LT_TAGVAR(inherit_rpath, $1)=no +_LT_TAGVAR(module_cmds, $1)= +_LT_TAGVAR(module_expsym_cmds, $1)= +_LT_TAGVAR(link_all_deplibs, $1)=unknown +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds +_LT_TAGVAR(no_undefined_flag, $1)= +_LT_TAGVAR(whole_archive_flag_spec, $1)= +_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + +# Source file extension for f77 test sources. +ac_ext=f + +# Object file extension for compiled f77 test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# No sense in running all these tests if we already determined that +# the F77 compiler isn't working. Some variables (like enable_shared) +# are currently assumed to apply to all compilers on this platform, +# and will be corrupted by setting them based on a non-working compiler. +if test "$_lt_disable_F77" != yes; then + # Code to be used in simple compile tests + lt_simple_compile_test_code="\ + subroutine t + return + end +" + + # Code to be used in simple link tests + lt_simple_link_test_code="\ + program t + end +" + + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + _LT_TAG_COMPILER + + # save warnings/boilerplate of simple test code + _LT_COMPILER_BOILERPLATE + _LT_LINKER_BOILERPLATE + + # Allow CC to be a program name with arguments. + lt_save_CC="$CC" + lt_save_GCC=$GCC + lt_save_CFLAGS=$CFLAGS + CC=${F77-"f77"} + CFLAGS=$FFLAGS + compiler=$CC + _LT_TAGVAR(compiler, $1)=$CC + _LT_CC_BASENAME([$compiler]) + GCC=$G77 + if test -n "$compiler"; then + AC_MSG_CHECKING([if libtool supports shared libraries]) + AC_MSG_RESULT([$can_build_shared]) + + AC_MSG_CHECKING([whether to build shared libraries]) + test "$can_build_shared" = "no" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + aix[[4-9]]*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; + esac + AC_MSG_RESULT([$enable_shared]) + + AC_MSG_CHECKING([whether to build static libraries]) + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes + AC_MSG_RESULT([$enable_static]) + + _LT_TAGVAR(GCC, $1)="$G77" + _LT_TAGVAR(LD, $1)="$LD" + + ## CAVEAT EMPTOR: + ## There is no encapsulation within the following macros, do not change + ## the running order or otherwise move them around unless you know exactly + ## what you are doing... + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) + fi # test -n "$compiler" + + GCC=$lt_save_GCC + CC="$lt_save_CC" + CFLAGS="$lt_save_CFLAGS" +fi # test "$_lt_disable_F77" != yes + +AC_LANG_POP +])# _LT_LANG_F77_CONFIG + + +# _LT_LANG_FC_CONFIG([TAG]) +# ------------------------- +# Ensure that the configuration variables for a Fortran compiler are +# suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to `libtool'. +m4_defun([_LT_LANG_FC_CONFIG], +[AC_LANG_PUSH(Fortran) + +if test -z "$FC" || test "X$FC" = "Xno"; then + _lt_disable_FC=yes +fi + +_LT_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_TAGVAR(allow_undefined_flag, $1)= +_LT_TAGVAR(always_export_symbols, $1)=no +_LT_TAGVAR(archive_expsym_cmds, $1)= +_LT_TAGVAR(export_dynamic_flag_spec, $1)= +_LT_TAGVAR(hardcode_direct, $1)=no +_LT_TAGVAR(hardcode_direct_absolute, $1)=no +_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= +_LT_TAGVAR(hardcode_libdir_separator, $1)= +_LT_TAGVAR(hardcode_minus_L, $1)=no +_LT_TAGVAR(hardcode_automatic, $1)=no +_LT_TAGVAR(inherit_rpath, $1)=no +_LT_TAGVAR(module_cmds, $1)= +_LT_TAGVAR(module_expsym_cmds, $1)= +_LT_TAGVAR(link_all_deplibs, $1)=unknown +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds +_LT_TAGVAR(no_undefined_flag, $1)= +_LT_TAGVAR(whole_archive_flag_spec, $1)= +_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + +# Source file extension for fc test sources. +ac_ext=${ac_fc_srcext-f} + +# Object file extension for compiled fc test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# No sense in running all these tests if we already determined that +# the FC compiler isn't working. Some variables (like enable_shared) +# are currently assumed to apply to all compilers on this platform, +# and will be corrupted by setting them based on a non-working compiler. +if test "$_lt_disable_FC" != yes; then + # Code to be used in simple compile tests + lt_simple_compile_test_code="\ + subroutine t + return + end +" + + # Code to be used in simple link tests + lt_simple_link_test_code="\ + program t + end +" + + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + _LT_TAG_COMPILER + + # save warnings/boilerplate of simple test code + _LT_COMPILER_BOILERPLATE + _LT_LINKER_BOILERPLATE + + # Allow CC to be a program name with arguments. + lt_save_CC="$CC" + lt_save_GCC=$GCC + lt_save_CFLAGS=$CFLAGS + CC=${FC-"f95"} + CFLAGS=$FCFLAGS + compiler=$CC + GCC=$ac_cv_fc_compiler_gnu + + _LT_TAGVAR(compiler, $1)=$CC + _LT_CC_BASENAME([$compiler]) + + if test -n "$compiler"; then + AC_MSG_CHECKING([if libtool supports shared libraries]) + AC_MSG_RESULT([$can_build_shared]) + + AC_MSG_CHECKING([whether to build shared libraries]) + test "$can_build_shared" = "no" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + aix[[4-9]]*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; + esac + AC_MSG_RESULT([$enable_shared]) + + AC_MSG_CHECKING([whether to build static libraries]) + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes + AC_MSG_RESULT([$enable_static]) + + _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu" + _LT_TAGVAR(LD, $1)="$LD" + + ## CAVEAT EMPTOR: + ## There is no encapsulation within the following macros, do not change + ## the running order or otherwise move them around unless you know exactly + ## what you are doing... + _LT_SYS_HIDDEN_LIBDEPS($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) + fi # test -n "$compiler" + + GCC=$lt_save_GCC + CC=$lt_save_CC + CFLAGS=$lt_save_CFLAGS +fi # test "$_lt_disable_FC" != yes + +AC_LANG_POP +])# _LT_LANG_FC_CONFIG + + +# _LT_LANG_GCJ_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for the GNU Java Compiler compiler +# are suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to `libtool'. +m4_defun([_LT_LANG_GCJ_CONFIG], +[AC_REQUIRE([LT_PROG_GCJ])dnl +AC_LANG_SAVE + +# Source file extension for Java test sources. +ac_ext=java + +# Object file extension for compiled Java test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="class foo {}" + +# Code to be used in simple link tests +lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }' + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_TAG_COMPILER + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +# Allow CC to be a program name with arguments. +lt_save_CC=$CC +lt_save_CFLAGS=$CFLAGS +lt_save_GCC=$GCC +GCC=yes +CC=${GCJ-"gcj"} +CFLAGS=$GCJFLAGS +compiler=$CC +_LT_TAGVAR(compiler, $1)=$CC +_LT_TAGVAR(LD, $1)="$LD" +_LT_CC_BASENAME([$compiler]) + +# GCJ did not exist at the time GCC didn't implicitly link libc in. +_LT_TAGVAR(archive_cmds_need_lc, $1)=no + +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds + +if test -n "$compiler"; then + _LT_COMPILER_NO_RTTI($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) +fi + +AC_LANG_RESTORE + +GCC=$lt_save_GCC +CC=$lt_save_CC +CFLAGS=$lt_save_CFLAGS +])# _LT_LANG_GCJ_CONFIG + + +# _LT_LANG_GO_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for the GNU Go compiler +# are suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to `libtool'. +m4_defun([_LT_LANG_GO_CONFIG], +[AC_REQUIRE([LT_PROG_GO])dnl +AC_LANG_SAVE + +# Source file extension for Go test sources. +ac_ext=go + +# Object file extension for compiled Go test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="package main; func main() { }" + +# Code to be used in simple link tests +lt_simple_link_test_code='package main; func main() { }' + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_TAG_COMPILER + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +# Allow CC to be a program name with arguments. +lt_save_CC=$CC +lt_save_CFLAGS=$CFLAGS +lt_save_GCC=$GCC +GCC=yes +CC=${GOC-"gccgo"} +CFLAGS=$GOFLAGS +compiler=$CC +_LT_TAGVAR(compiler, $1)=$CC +_LT_TAGVAR(LD, $1)="$LD" +_LT_CC_BASENAME([$compiler]) + +# Go did not exist at the time GCC didn't implicitly link libc in. +_LT_TAGVAR(archive_cmds_need_lc, $1)=no + +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds + +if test -n "$compiler"; then + _LT_COMPILER_NO_RTTI($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) +fi + +AC_LANG_RESTORE + +GCC=$lt_save_GCC +CC=$lt_save_CC +CFLAGS=$lt_save_CFLAGS +])# _LT_LANG_GO_CONFIG + + +# _LT_LANG_RC_CONFIG([TAG]) +# ------------------------- +# Ensure that the configuration variables for the Windows resource compiler +# are suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to `libtool'. +m4_defun([_LT_LANG_RC_CONFIG], +[AC_REQUIRE([LT_PROG_RC])dnl +AC_LANG_SAVE + +# Source file extension for RC test sources. +ac_ext=rc + +# Object file extension for compiled RC test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' + +# Code to be used in simple link tests +lt_simple_link_test_code="$lt_simple_compile_test_code" + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_TAG_COMPILER + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +# Allow CC to be a program name with arguments. +lt_save_CC="$CC" +lt_save_CFLAGS=$CFLAGS +lt_save_GCC=$GCC +GCC= +CC=${RC-"windres"} +CFLAGS= +compiler=$CC +_LT_TAGVAR(compiler, $1)=$CC +_LT_CC_BASENAME([$compiler]) +_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes + +if test -n "$compiler"; then + : + _LT_CONFIG($1) +fi + +GCC=$lt_save_GCC +AC_LANG_RESTORE +CC=$lt_save_CC +CFLAGS=$lt_save_CFLAGS +])# _LT_LANG_RC_CONFIG + + +# LT_PROG_GCJ +# ----------- +AC_DEFUN([LT_PROG_GCJ], +[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ], + [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ], + [AC_CHECK_TOOL(GCJ, gcj,) + test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" + AC_SUBST(GCJFLAGS)])])[]dnl +]) + +# Old name: +AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([LT_AC_PROG_GCJ], []) + + +# LT_PROG_GO +# ---------- +AC_DEFUN([LT_PROG_GO], +[AC_CHECK_TOOL(GOC, gccgo,) +]) + + +# LT_PROG_RC +# ---------- +AC_DEFUN([LT_PROG_RC], +[AC_CHECK_TOOL(RC, windres,) +]) + +# Old name: +AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([LT_AC_PROG_RC], []) + + +# _LT_DECL_EGREP +# -------------- +# If we don't have a new enough Autoconf to choose the best grep +# available, choose the one first in the user's PATH. +m4_defun([_LT_DECL_EGREP], +[AC_REQUIRE([AC_PROG_EGREP])dnl +AC_REQUIRE([AC_PROG_FGREP])dnl +test -z "$GREP" && GREP=grep +_LT_DECL([], [GREP], [1], [A grep program that handles long lines]) +_LT_DECL([], [EGREP], [1], [An ERE matcher]) +_LT_DECL([], [FGREP], [1], [A literal string matcher]) +dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too +AC_SUBST([GREP]) +]) + + +# _LT_DECL_OBJDUMP +# -------------- +# If we don't have a new enough Autoconf to choose the best objdump +# available, choose the one first in the user's PATH. +m4_defun([_LT_DECL_OBJDUMP], +[AC_CHECK_TOOL(OBJDUMP, objdump, false) +test -z "$OBJDUMP" && OBJDUMP=objdump +_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper]) +AC_SUBST([OBJDUMP]) +]) + +# _LT_DECL_DLLTOOL +# ---------------- +# Ensure DLLTOOL variable is set. +m4_defun([_LT_DECL_DLLTOOL], +[AC_CHECK_TOOL(DLLTOOL, dlltool, false) +test -z "$DLLTOOL" && DLLTOOL=dlltool +_LT_DECL([], [DLLTOOL], [1], [DLL creation program]) +AC_SUBST([DLLTOOL]) +]) + +# _LT_DECL_SED +# ------------ +# Check for a fully-functional sed program, that truncates +# as few characters as possible. Prefer GNU sed if found. +m4_defun([_LT_DECL_SED], +[AC_PROG_SED +test -z "$SED" && SED=sed +Xsed="$SED -e 1s/^X//" +_LT_DECL([], [SED], [1], [A sed program that does not truncate output]) +_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"], + [Sed that helps us avoid accidentally triggering echo(1) options like -n]) +])# _LT_DECL_SED + +m4_ifndef([AC_PROG_SED], [ +# NOTE: This macro has been submitted for inclusion into # +# GNU Autoconf as AC_PROG_SED. When it is available in # +# a released version of Autoconf we should remove this # +# macro and use it instead. # + +m4_defun([AC_PROG_SED], +[AC_MSG_CHECKING([for a sed that does not truncate output]) +AC_CACHE_VAL(lt_cv_path_SED, +[# Loop through the user's path and test for sed and gsed. +# Then use that list of sed's as ones to test for truncation. +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for lt_ac_prog in sed gsed; do + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then + lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" + fi + done + done +done +IFS=$as_save_IFS +lt_ac_max=0 +lt_ac_count=0 +# Add /usr/xpg4/bin/sed as it is typically found on Solaris +# along with /bin/sed that truncates output. +for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do + test ! -f $lt_ac_sed && continue + cat /dev/null > conftest.in + lt_ac_count=0 + echo $ECHO_N "0123456789$ECHO_C" >conftest.in + # Check for GNU sed and select it if it is found. + if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then + lt_cv_path_SED=$lt_ac_sed + break + fi + while true; do + cat conftest.in conftest.in >conftest.tmp + mv conftest.tmp conftest.in + cp conftest.in conftest.nl + echo >>conftest.nl + $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break + cmp -s conftest.out conftest.nl || break + # 10000 chars as input seems more than enough + test $lt_ac_count -gt 10 && break + lt_ac_count=`expr $lt_ac_count + 1` + if test $lt_ac_count -gt $lt_ac_max; then + lt_ac_max=$lt_ac_count + lt_cv_path_SED=$lt_ac_sed + fi + done +done +]) +SED=$lt_cv_path_SED +AC_SUBST([SED]) +AC_MSG_RESULT([$SED]) +])#AC_PROG_SED +])#m4_ifndef - beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; +# Old name: +AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([LT_AC_PROG_SED], []) - mingw* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' - ;; - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' - ;; +# _LT_CHECK_SHELL_FEATURES +# ------------------------ +# Find out whether the shell is Bourne or XSI compatible, +# or has some other useful features. +m4_defun([_LT_CHECK_SHELL_FEATURES], +[AC_MSG_CHECKING([whether the shell understands some XSI constructs]) +# Try some XSI features +xsi_shell=no +( _lt_dummy="a/b/c" + test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ + = c,a/b,b/c, \ + && eval 'test $(( 1 + 1 )) -eq 2 \ + && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ + && xsi_shell=yes +AC_MSG_RESULT([$xsi_shell]) +_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell']) + +AC_MSG_CHECKING([whether the shell understands "+="]) +lt_shell_append=no +( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \ + >/dev/null 2>&1 \ + && lt_shell_append=yes +AC_MSG_RESULT([$lt_shell_append]) +_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append']) - msdosdjgpp*) - # Just because we use GCC doesn't mean we suddenly get shared libraries - # on systems that don't support them. - _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - enable_shared=no - ;; +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + lt_unset=unset +else + lt_unset=false +fi +_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl - sysv4*MP*) - if test -d /usr/nec; then - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic - fi - ;; +# test EBCDIC or ASCII +case `echo X|tr X '\101'` in + A) # ASCII based system + # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr + lt_SP2NL='tr \040 \012' + lt_NL2SP='tr \015\012 \040\040' + ;; + *) # EBCDIC based system + lt_SP2NL='tr \100 \n' + lt_NL2SP='tr \r\n \100\100' + ;; +esac +_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl +_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl +])# _LT_CHECK_SHELL_FEATURES + + +# _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY) +# ------------------------------------------------------ +# In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and +# '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY. +m4_defun([_LT_PROG_FUNCTION_REPLACE], +[dnl { +sed -e '/^$1 ()$/,/^} # $1 /c\ +$1 ()\ +{\ +m4_bpatsubsts([$2], [$], [\\], [^\([ ]\)], [\\\1]) +} # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: +]) - hpux*) - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - ;; - *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; +# _LT_PROG_REPLACE_SHELLFNS +# ------------------------- +# Replace existing portable implementations of several shell functions with +# equivalent extended shell implementations where those features are available.. +m4_defun([_LT_PROG_REPLACE_SHELLFNS], +[if test x"$xsi_shell" = xyes; then + _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl + case ${1} in + */*) func_dirname_result="${1%/*}${2}" ;; + * ) func_dirname_result="${3}" ;; + esac]) + + _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl + func_basename_result="${1##*/}"]) + + _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl + case ${1} in + */*) func_dirname_result="${1%/*}${2}" ;; + * ) func_dirname_result="${3}" ;; esac - else - # PORTME Check for flag to pass linker flags through the system compiler. - case $host_os in - aix*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - else - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' - fi - ;; - darwin*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - case $cc_basename in - xlc*) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon' - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - ;; - esac - ;; - - mingw* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' - ;; - - hpux9* | hpux10* | hpux11*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' - ;; - esac - # Is there a better lt_prog_compiler_static that works with the bundled CC? - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' - ;; - - irix5* | irix6* | nonstopux*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # PIC (with -KPIC) is the default. - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; + func_basename_result="${1##*/}"]) - newsos6) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; + _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl + # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are + # positional parameters, so assign one to ordinary parameter first. + func_stripname_result=${3} + func_stripname_result=${func_stripname_result#"${1}"} + func_stripname_result=${func_stripname_result%"${2}"}]) - linux*) - case $cc_basename in - icc* | ecc*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' - ;; - pgcc* | pgf77* | pgf90* | pgf95*) - # Portland Group compilers (*not* the Pentium gcc compiler, - # which looks to be a dead project) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - ccc*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # All Alpha code is PIC. - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - esac - ;; + _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl + func_split_long_opt_name=${1%%=*} + func_split_long_opt_arg=${1#*=}]) - osf3* | osf4* | osf5*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # All OSF/1 code is PIC. - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; + _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl + func_split_short_opt_arg=${1#??} + func_split_short_opt_name=${1%"$func_split_short_opt_arg"}]) - sco3.2v5*) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kpic' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-dn' - ;; + _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl + case ${1} in + *.lo) func_lo2o_result=${1%.lo}.${objext} ;; + *) func_lo2o_result=${1} ;; + esac]) - solaris*) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - case $cc_basename in - f77* | f90* | f95*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; - *) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; - esac - ;; + _LT_PROG_FUNCTION_REPLACE([func_xform], [ func_xform_result=${1%.*}.lo]) - sunos4*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; + _LT_PROG_FUNCTION_REPLACE([func_arith], [ func_arith_result=$(( $[*] ))]) - sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; + _LT_PROG_FUNCTION_REPLACE([func_len], [ func_len_result=${#1}]) +fi - sysv4*MP*) - if test -d /usr/nec ;then - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - fi - ;; +if test x"$lt_shell_append" = xyes; then + _LT_PROG_FUNCTION_REPLACE([func_append], [ eval "${1}+=\\${2}"]) - unicos*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - ;; + _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl + func_quote_for_eval "${2}" +dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \ + eval "${1}+=\\\\ \\$func_quote_for_eval_result"]) - uts4*) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; + # Save a `func_append' function call where possible by direct use of '+=' + sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") + test 0 -eq $? || _lt_function_replace_fail=: +else + # Save a `func_append' function call even when '+=' is not available + sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") + test 0 -eq $? || _lt_function_replace_fail=: +fi - *) - _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - ;; - esac - fi +if test x"$_lt_function_replace_fail" = x":"; then + AC_MSG_WARN([Unable to substitute extended shell functions in $ofile]) +fi ]) -AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)]) -# -# Check to make sure the PIC flag actually works. -# -if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then - AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works], - _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1), - [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [], - [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in - "" | " "*) ;; - *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;; - esac], - [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= - _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) -fi -case $host_os in - # For platforms which do not support PIC, -DPIC is meaningless: - *djgpp*) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= +# _LT_PATH_CONVERSION_FUNCTIONS +# ----------------------------- +# Determine which file name conversion functions should be used by +# func_to_host_file (and, implicitly, by func_to_host_path). These are needed +# for certain cross-compile configurations and native mingw. +m4_defun([_LT_PATH_CONVERSION_FUNCTIONS], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +AC_MSG_CHECKING([how to convert $build file names to $host format]) +AC_CACHE_VAL(lt_cv_to_host_file_cmd, +[case $host in + *-*-mingw* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 + ;; + *-*-cygwin* ) + lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 + ;; + * ) # otherwise, assume *nix + lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 + ;; + esac ;; - *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])" + *-*-cygwin* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin + ;; + *-*-cygwin* ) + lt_cv_to_host_file_cmd=func_convert_file_noop + ;; + * ) # otherwise, assume *nix + lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin + ;; + esac + ;; + * ) # unhandled hosts (and "normal" native builds) + lt_cv_to_host_file_cmd=func_convert_file_noop + ;; +esac +]) +to_host_file_cmd=$lt_cv_to_host_file_cmd +AC_MSG_RESULT([$lt_cv_to_host_file_cmd]) +_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd], + [0], [convert $build file names to $host format])dnl + +AC_MSG_CHECKING([how to convert $build file names to toolchain format]) +AC_CACHE_VAL(lt_cv_to_tool_file_cmd, +[#assume ordinary cross tools, or native build. +lt_cv_to_tool_file_cmd=func_convert_file_noop +case $host in + *-*-mingw* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 + ;; + esac ;; esac ]) +to_tool_file_cmd=$lt_cv_to_tool_file_cmd +AC_MSG_RESULT([$lt_cv_to_tool_file_cmd]) +_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd], + [0], [convert $build files to toolchain format])dnl +])# _LT_PATH_CONVERSION_FUNCTIONS +# Helper functions for option handling. -*- Autoconf -*- +# +# Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation, +# Inc. +# Written by Gary V. Vaughan, 2004 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. -# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME]) -# ------------------------------------ -# See if the linker supports building shared libraries. -AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS], -[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) -ifelse([$1],[CXX],[ - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - case $host_os in - aix4* | aix5*) - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - if $NM -V 2>&1 | grep 'GNU' > /dev/null; then - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' - else - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' - fi - ;; - pw32*) - _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" - ;; - cygwin* | mingw*) - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/;/^.* __nm__/s/^.* __nm__\([[^ ]]*\) [[^ ]]*/\1 DATA/;/^I /d;/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' - ;; - *) - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - ;; - esac -],[ - runpath_var= - _LT_AC_TAGVAR(allow_undefined_flag, $1)= - _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no - _LT_AC_TAGVAR(archive_cmds, $1)= - _LT_AC_TAGVAR(archive_expsym_cmds, $1)= - _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)= - _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)= - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= - _LT_AC_TAGVAR(thread_safe_flag_spec, $1)= - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= - _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_minus_L, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown - _LT_AC_TAGVAR(hardcode_automatic, $1)=no - _LT_AC_TAGVAR(module_cmds, $1)= - _LT_AC_TAGVAR(module_expsym_cmds, $1)= - _LT_AC_TAGVAR(always_export_symbols, $1)=no - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - # include_expsyms should be a list of space-separated symbols to be *always* - # included in the symbol list - _LT_AC_TAGVAR(include_expsyms, $1)= - # exclude_expsyms can be an extended regexp of symbols to exclude - # it will be wrapped by ` (' and `)$', so one must not match beginning or - # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', - # as well as any symbol that contains `d'. - _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_" - # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out - # platforms (ab)use it in PIC code, but their linkers get confused if - # the symbol is explicitly referenced. Since portable code cannot - # rely on this symbol name, it's probably fine to never include it in - # preloaded symbol tables. - extract_expsyms_cmds= - # Just being paranoid about ensuring that cc_basename is set. - _LT_CC_BASENAME([$compiler]) - case $host_os in - cygwin* | mingw* | pw32*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no - fi - ;; - openbsd*) - with_gnu_ld=no - ;; - esac +# serial 7 ltoptions.m4 - _LT_AC_TAGVAR(ld_shlibs, $1)=yes - if test "$with_gnu_ld" = yes; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' +# This is to help aclocal find these macros, as it can't see m4_define. +AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])]) - # Set some defaults for GNU ld with shared library support. These - # are reset later if shared libraries are not supported. Putting them - # here allows them to be overridden if necessary. - runpath_var=LD_RUN_PATH - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= - fi - supports_anon_versioning=no - case `$LD -v 2>/dev/null` in - *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 - *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... - *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... - *\ 2.11.*) ;; # other 2.11 versions - *) supports_anon_versioning=yes ;; - esac - # See if GNU ld supports shared libraries. - case $host_os in - aix3* | aix4* | aix5*) - # On AIX/PPC, the GNU linker is very broken - if test "$host_cpu" != ia64; then - _LT_AC_TAGVAR(ld_shlibs, $1)=no - cat <&2 +# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME) +# ------------------------------------------ +m4_define([_LT_MANGLE_OPTION], +[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])]) -*** Warning: the GNU linker, at least up to release 2.9.1, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to modify your PATH -*** so that a non-GNU linker is found, and then restart. -EOF - fi - ;; +# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME) +# --------------------------------------- +# Set option OPTION-NAME for macro MACRO-NAME, and if there is a +# matching handler defined, dispatch to it. Other OPTION-NAMEs are +# saved as a flag. +m4_define([_LT_SET_OPTION], +[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl +m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]), + _LT_MANGLE_DEFUN([$1], [$2]), + [m4_warning([Unknown $1 option `$2'])])[]dnl +]) - amigaos*) - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - - # Samuel A. Falvo II reports - # that the semantics of dynamic libraries on AmigaOS, at least up - # to version 4, is to share data among multiple programs linked - # with the same dynamic library. Since this doesn't match the - # behavior of shared libraries on other platforms, we can't use - # them. - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - beos*) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; +# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET]) +# ------------------------------------------------------------ +# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. +m4_define([_LT_IF_OPTION], +[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])]) - cygwin* | mingw* | pw32*) - # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, - # as there is no search path for DLLs. - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_AC_TAGVAR(always_export_symbols, $1)=no - _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' - if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; +# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET) +# ------------------------------------------------------- +# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME +# are set. +m4_define([_LT_UNLESS_OPTIONS], +[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), + [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option), + [m4_define([$0_found])])])[]dnl +m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3 +])[]dnl +]) - linux*) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - tmp_addflag= - case $cc_basename,$host_cpu in - pgcc*) # Portland Group C compiler - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag' - ;; - pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag -Mnomain' ;; - ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 - tmp_addflag=' -i_dynamic' ;; - efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 - tmp_addflag=' -i_dynamic -nofor_main' ;; - ifc* | ifort*) # Intel Fortran compiler - tmp_addflag=' -nofor_main' ;; - esac - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - if test $supports_anon_versioning = yes; then - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - $echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' - fi - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; +# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST) +# ---------------------------------------- +# OPTION-LIST is a space-separated list of Libtool options associated +# with MACRO-NAME. If any OPTION has a matching handler declared with +# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about +# the unknown option and exit. +m4_defun([_LT_SET_OPTIONS], +[# Set options +m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), + [_LT_SET_OPTION([$1], _LT_Option)]) + +m4_if([$1],[LT_INIT],[ + dnl + dnl Simply set some default values (i.e off) if boolean options were not + dnl specified: + _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no + ]) + _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no + ]) + dnl + dnl If no reference was made to various pairs of opposing options, then + dnl we run the default mode handler for the pair. For example, if neither + dnl `shared' nor `disable-shared' was passed, we enable building of shared + dnl archives by default: + _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED]) + _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC]) + _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC]) + _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install], + [_LT_ENABLE_FAST_INSTALL]) + ]) +])# _LT_SET_OPTIONS + + + +# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME) +# ----------------------------------------- +m4_define([_LT_MANGLE_DEFUN], +[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])]) + - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; +# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE) +# ----------------------------------------------- +m4_define([LT_OPTION_DEFINE], +[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl +])# LT_OPTION_DEFINE - solaris* | sysv5*) - if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then - _LT_AC_TAGVAR(ld_shlibs, $1)=no - cat <&2 -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. +# dlopen +# ------ +LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes +]) -EOF - elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; +AU_DEFUN([AC_LIBTOOL_DLOPEN], +[_LT_SET_OPTION([LT_INIT], [dlopen]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you +put the `dlopen' option into LT_INIT's first parameter.]) +]) - sunos4*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' - wlarc= - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], []) - *) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no; then - runpath_var= - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= - fi - else - # PORTME fill in a description of your system's linker (not GNU ld) - case $host_os in - aix3*) - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_AC_TAGVAR(always_export_symbols, $1)=yes - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - if test "$GCC" = yes && test -z "$link_static_flag"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported - fi - ;; +# win32-dll +# --------- +# Declare package support for building win32 dll's. +LT_OPTION_DEFINE([LT_INIT], [win32-dll], +[enable_win32_dll=yes - aix4* | aix5*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - if $NM -V 2>&1 | grep 'GNU' > /dev/null; then - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' - else - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' - fi - aix_use_runtimelinking=no +case $host in +*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*) + AC_CHECK_TOOL(AS, as, false) + AC_CHECK_TOOL(DLLTOOL, dlltool, false) + AC_CHECK_TOOL(OBJDUMP, objdump, false) + ;; +esac - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*) - for ld_flag in $LDFLAGS; do - if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then - aix_use_runtimelinking=yes - break - fi - done - esac +test -z "$AS" && AS=as +_LT_DECL([], [AS], [1], [Assembler program])dnl - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi +test -z "$DLLTOOL" && DLLTOOL=dlltool +_LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. +test -z "$OBJDUMP" && OBJDUMP=objdump +_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl +])# win32-dll - _LT_AC_TAGVAR(archive_cmds, $1)='' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes +AU_DEFUN([AC_LIBTOOL_WIN32_DLL], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +_LT_SET_OPTION([LT_INIT], [win32-dll]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you +put the `win32-dll' option into LT_INIT's first parameter.]) +]) - if test "$GCC" = yes; then - case $host_os in aix4.[[012]]|aix4.[[012]].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - else - # We have old collect2 - _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= - fi - esac - shared_flag='-shared' - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' - fi - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' - else - shared_flag='${wl}-bM:SRE' - fi - fi - fi +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], []) - # It seems that -bexpall does not export symbols beginning with - # underscore (_), so it is better to generate a list of symbols to export. - _LT_AC_TAGVAR(always_export_symbols, $1)=yes - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' - # Determine the default libpath from the value encoded in an empty executable. - _LT_AC_SYS_LIBPATH_AIX - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' - _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an empty executable. - _LT_AC_SYS_LIBPATH_AIX - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' - # -bexpall does not export symbols beginning with underscore (_) - _LT_AC_TAGVAR(always_export_symbols, $1)=yes - # Exported symbols can be pulled into shared objects from archives - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' ' - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes - # This is similar to how AIX traditionally builds its shared libraries. - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + +# _LT_ENABLE_SHARED([DEFAULT]) +# ---------------------------- +# implement the --enable-shared flag, and supports the `shared' and +# `disable-shared' LT_INIT options. +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +m4_define([_LT_ENABLE_SHARED], +[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl +AC_ARG_ENABLE([shared], + [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@], + [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_shared=yes ;; + no) enable_shared=no ;; + *) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_shared=yes fi - fi + done + IFS="$lt_save_ifs" ;; + esac], + [enable_shared=]_LT_ENABLE_SHARED_DEFAULT) - amigaos*) - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - # see comment about different semantics on the GNU ld section - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; + _LT_DECL([build_libtool_libs], [enable_shared], [0], + [Whether or not to build shared libraries]) +])# _LT_ENABLE_SHARED - bsdi[[45]]*) - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic - ;; +LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])]) +LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])]) - cygwin* | mingw* | pw32*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true' - # FIXME: Should let the user specify the lib program. - _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs' - _LT_AC_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`' - _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - ;; +# Old names: +AC_DEFUN([AC_ENABLE_SHARED], +[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared]) +]) - darwin* | rhapsody*) - case $host_os in - rhapsody* | darwin1.[[012]]) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress' - ;; - *) # Darwin 1.3 on - if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' - else - case ${MACOSX_DEPLOYMENT_TARGET} in - 10.[[012]]) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' - ;; - 10.*) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup' - ;; - esac - fi - ;; - esac - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_automatic, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='' - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - if test "$GCC" = yes ; then - output_verbose_link_cmd='echo' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' - _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - else - case $cc_basename in - xlc*) - output_verbose_link_cmd='echo' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' - _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - ;; - *) - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - fi - ;; +AC_DEFUN([AC_DISABLE_SHARED], +[_LT_SET_OPTION([LT_INIT], [disable-shared]) +]) - dgux*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; +AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) +AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) - freebsd1*) - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AM_ENABLE_SHARED], []) +dnl AC_DEFUN([AM_DISABLE_SHARED], []) - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd* | kfreebsd*-gnu | dragonfly*) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +# _LT_ENABLE_STATIC([DEFAULT]) +# ---------------------------- +# implement the --enable-static flag, and support the `static' and +# `disable-static' LT_INIT options. +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +m4_define([_LT_ENABLE_STATIC], +[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl +AC_ARG_ENABLE([static], + [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@], + [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_static=yes ;; + no) enable_static=no ;; + *) + enable_static=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS="$lt_save_ifs" ;; + esac], + [enable_static=]_LT_ENABLE_STATIC_DEFAULT) - hpux9*) - if test "$GCC" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_DECL([build_old_libs], [enable_static], [0], + [Whether or not to build static libraries]) +])# _LT_ENABLE_STATIC - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - ;; +LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])]) +LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])]) - hpux10* | hpux11*) - if test "$GCC" = yes -a "$with_gnu_ld" = no; then - case $host_cpu in - hppa*64*|ia64*) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - else - case $host_cpu in - hppa*64*|ia64*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags' - ;; - *) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' - ;; - esac - fi - if test "$with_gnu_ld" = no; then - case $host_cpu in - hppa*64*) - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - ia64*) - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +# Old names: +AC_DEFUN([AC_ENABLE_STATIC], +[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static]) +]) - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - ;; - *) - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' +AC_DEFUN([AC_DISABLE_STATIC], +[_LT_SET_OPTION([LT_INIT], [disable-static]) +]) - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - ;; - esac - fi - ;; +AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) +AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) - irix5* | irix6* | nonstopux*) - if test "$GCC" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir' - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - ;; +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AM_ENABLE_STATIC], []) +dnl AC_DEFUN([AM_DISABLE_STATIC], []) - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + + +# _LT_ENABLE_FAST_INSTALL([DEFAULT]) +# ---------------------------------- +# implement the --enable-fast-install flag, and support the `fast-install' +# and `disable-fast-install' LT_INIT options. +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +m4_define([_LT_ENABLE_FAST_INSTALL], +[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl +AC_ARG_ENABLE([fast-install], + [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], + [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_fast_install=yes ;; + no) enable_fast_install=no ;; + *) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS="$lt_save_ifs" ;; + esac], + [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT) + +_LT_DECL([fast_install], [enable_fast_install], [0], + [Whether or not to optimize for fast installation])dnl +])# _LT_ENABLE_FAST_INSTALL + +LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])]) +LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])]) + +# Old names: +AU_DEFUN([AC_ENABLE_FAST_INSTALL], +[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you put +the `fast-install' option into LT_INIT's first parameter.]) +]) - newsos6) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; +AU_DEFUN([AC_DISABLE_FAST_INSTALL], +[_LT_SET_OPTION([LT_INIT], [disable-fast-install]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you put +the `disable-fast-install' option into LT_INIT's first parameter.]) +]) - openbsd*) - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - else - case $host_os in - openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - ;; - *) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - ;; - esac - fi - ;; +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], []) +dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], []) - os2*) - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' - ;; - osf3*) - if test "$GCC" = yes; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +# _LT_WITH_PIC([MODE]) +# -------------------- +# implement the --with-pic flag, and support the `pic-only' and `no-pic' +# LT_INIT options. +# MODE is either `yes' or `no'. If omitted, it defaults to `both'. +m4_define([_LT_WITH_PIC], +[AC_ARG_WITH([pic], + [AS_HELP_STRING([--with-pic@<:@=PKGS@:>@], + [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], + [lt_p=${PACKAGE-default} + case $withval in + yes|no) pic_mode=$withval ;; + *) + pic_mode=default + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for lt_pkg in $withval; do + IFS="$lt_save_ifs" + if test "X$lt_pkg" = "X$lt_p"; then + pic_mode=yes + fi + done + IFS="$lt_save_ifs" ;; + esac], + [pic_mode=default]) - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - else - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ - $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' +test -z "$pic_mode" && pic_mode=m4_default([$1], [default]) - # Both c and cxx compiler support -rpath directly - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' - fi - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - ;; +_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl +])# _LT_WITH_PIC - sco3.2v5*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - ;; +LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])]) +LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])]) - solaris*) - _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' - if test "$GCC" = yes; then - wlarc='${wl}' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' - else - wlarc='' - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - case $host_os in - solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; - *) - # The compiler driver will combine linker options so we - # cannot just pass the convience library names through - # without $wl, iff we do not link with $LD. - # Luckily, gcc supports the same syntax we need for Sun Studio. - # Supported since Solaris 2.6 (maybe 2.5.1?) - case $wlarc in - '') - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;; - *) - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;; - esac ;; - esac - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - ;; +# Old name: +AU_DEFUN([AC_LIBTOOL_PICMODE], +[_LT_SET_OPTION([LT_INIT], [pic-only]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you +put the `pic-only' option into LT_INIT's first parameter.]) +]) - sunos4*) - if test "x$host_vendor" = xsequent; then - # Use $CC to link under sequent, because it throws in some extra .o - # files that make .init and .fini sections work. - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_PICMODE], []) - sysv4) - case $host_vendor in - sni) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true??? - ;; - siemens) - ## LD is ld it makes a PLAMLIB - ## CC just makes a GrossModule. - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' - _LT_AC_TAGVAR(hardcode_direct, $1)=no - ;; - motorola) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie - ;; - esac - runpath_var='LD_RUN_PATH' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - sysv4.3*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' - ;; +m4_define([_LTDL_MODE], []) +LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive], + [m4_define([_LTDL_MODE], [nonrecursive])]) +LT_OPTION_DEFINE([LTDL_INIT], [recursive], + [m4_define([_LTDL_MODE], [recursive])]) +LT_OPTION_DEFINE([LTDL_INIT], [subproject], + [m4_define([_LTDL_MODE], [subproject])]) - sysv4*MP*) - if test -d /usr/nec; then - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - _LT_AC_TAGVAR(ld_shlibs, $1)=yes - fi - ;; +m4_define([_LTDL_TYPE], []) +LT_OPTION_DEFINE([LTDL_INIT], [installable], + [m4_define([_LTDL_TYPE], [installable])]) +LT_OPTION_DEFINE([LTDL_INIT], [convenience], + [m4_define([_LTDL_TYPE], [convenience])]) - sysv4.2uw2*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_minus_L, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - hardcode_runpath_var=yes - runpath_var=LD_RUN_PATH - ;; +# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*- +# +# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc. +# Written by Gary V. Vaughan, 2004 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. - sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*) - _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z ${wl}text' - if test "$GCC" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - runpath_var='LD_RUN_PATH' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; +# serial 6 ltsugar.m4 - sysv5*) - _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' - # $CC -shared without GNU ld will not create a library from C++ - # object files and a static libstdc++, better avoid it by now - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - runpath_var='LD_RUN_PATH' - ;; +# This is to help aclocal find these macros, as it can't see m4_define. +AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])]) - uts4*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - *) - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - fi -]) -AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) -test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no +# lt_join(SEP, ARG1, [ARG2...]) +# ----------------------------- +# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their +# associated separator. +# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier +# versions in m4sugar had bugs. +m4_define([lt_join], +[m4_if([$#], [1], [], + [$#], [2], [[$2]], + [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])]) +m4_define([_lt_join], +[m4_if([$#$2], [2], [], + [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])]) -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi -# -# Do we need to explicitly link libc? -# -case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in -x|xyes) - # Assume -lc should be added - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes +# lt_car(LIST) +# lt_cdr(LIST) +# ------------ +# Manipulate m4 lists. +# These macros are necessary as long as will still need to support +# Autoconf-2.59 which quotes differently. +m4_define([lt_car], [[$1]]) +m4_define([lt_cdr], +[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])], + [$#], 1, [], + [m4_dquote(m4_shift($@))])]) +m4_define([lt_unquote], $1) + + +# lt_append(MACRO-NAME, STRING, [SEPARATOR]) +# ------------------------------------------ +# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'. +# Note that neither SEPARATOR nor STRING are expanded; they are appended +# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked). +# No SEPARATOR is output if MACRO-NAME was previously undefined (different +# than defined and empty). +# +# This macro is needed until we can rely on Autoconf 2.62, since earlier +# versions of m4sugar mistakenly expanded SEPARATOR but not STRING. +m4_define([lt_append], +[m4_define([$1], + m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])]) - if test "$enable_shared" = yes && test "$GCC" = yes; then - case $_LT_AC_TAGVAR(archive_cmds, $1) in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - AC_MSG_CHECKING([whether -lc should be explicitly linked in]) - $rm conftest* - printf "$lt_simple_compile_test_code" > conftest.$ac_ext - - if AC_TRY_EVAL(ac_compile) 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1) - _LT_AC_TAGVAR(allow_undefined_flag, $1)= - if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) - then - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - else - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes - fi - _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $rm conftest* - AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)]) - ;; - esac - fi - ;; -esac -])# AC_LIBTOOL_PROG_LD_SHLIBS -# _LT_AC_FILE_LTDLL_C -# ------------------- -# Be careful that the start marker always follows a newline. -AC_DEFUN([_LT_AC_FILE_LTDLL_C], [ -# /* ltdll.c starts here */ -# #define WIN32_LEAN_AND_MEAN -# #include -# #undef WIN32_LEAN_AND_MEAN -# #include -# -# #ifndef __CYGWIN__ -# # ifdef __CYGWIN32__ -# # define __CYGWIN__ __CYGWIN32__ -# # endif -# #endif -# -# #ifdef __cplusplus -# extern "C" { -# #endif -# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); -# #ifdef __cplusplus -# } -# #endif -# -# #ifdef __CYGWIN__ -# #include -# DECLARE_CYGWIN_DLL( DllMain ); -# #endif -# HINSTANCE __hDllInstance_base; -# -# BOOL APIENTRY -# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) -# { -# __hDllInstance_base = hInst; -# return TRUE; -# } -# /* ltdll.c ends here */ -])# _LT_AC_FILE_LTDLL_C +# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...]) +# ---------------------------------------------------------- +# Produce a SEP delimited list of all paired combinations of elements of +# PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list +# has the form PREFIXmINFIXSUFFIXn. +# Needed until we can rely on m4_combine added in Autoconf 2.62. +m4_define([lt_combine], +[m4_if(m4_eval([$# > 3]), [1], + [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl +[[m4_foreach([_Lt_prefix], [$2], + [m4_foreach([_Lt_suffix], + ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[, + [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])]) + + +# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ]) +# ----------------------------------------------------------------------- +# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited +# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ. +m4_define([lt_if_append_uniq], +[m4_ifdef([$1], + [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1], + [lt_append([$1], [$2], [$3])$4], + [$5])], + [lt_append([$1], [$2], [$3])$4])]) -# _LT_AC_TAGVAR(VARNAME, [TAGNAME]) -# --------------------------------- -AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])]) +# lt_dict_add(DICT, KEY, VALUE) +# ----------------------------- +m4_define([lt_dict_add], +[m4_define([$1($2)], [$3])]) -# old names -AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL]) -AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) -AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) -AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) -AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) -AC_DEFUN([AM_PROG_LD], [AC_PROG_LD]) -AC_DEFUN([AM_PROG_NM], [AC_PROG_NM]) +# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE) +# -------------------------------------------- +m4_define([lt_dict_add_subkey], +[m4_define([$1($2:$3)], [$4])]) -# This is just to silence aclocal about the macro not being used -ifelse([AC_DISABLE_FAST_INSTALL]) -AC_DEFUN([LT_AC_PROG_GCJ], -[AC_CHECK_TOOL(GCJ, gcj, no) - test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" - AC_SUBST(GCJFLAGS) +# lt_dict_fetch(DICT, KEY, [SUBKEY]) +# ---------------------------------- +m4_define([lt_dict_fetch], +[m4_ifval([$3], + m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]), + m4_ifdef([$1($2)], [m4_defn([$1($2)])]))]) + + +# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE]) +# ----------------------------------------------------------------- +m4_define([lt_if_dict_fetch], +[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4], + [$5], + [$6])]) + + +# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...]) +# -------------------------------------------------------------- +m4_define([lt_dict_filter], +[m4_if([$5], [], [], + [lt_join(m4_quote(m4_default([$4], [[, ]])), + lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]), + [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl ]) -AC_DEFUN([LT_AC_PROG_RC], -[AC_CHECK_TOOL(RC, windres, no) -]) +# ltversion.m4 -- version numbers -*- Autoconf -*- +# +# Copyright (C) 2004 Free Software Foundation, Inc. +# Written by Scott James Remnant, 2004 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. -# NOTE: This macro has been submitted for inclusion into # -# GNU Autoconf as AC_PROG_SED. When it is available in # -# a released version of Autoconf we should remove this # -# macro and use it instead. # -# LT_AC_PROG_SED -# -------------- -# Check for a fully-functional sed program, that truncates -# as few characters as possible. Prefer GNU sed if found. -AC_DEFUN([LT_AC_PROG_SED], -[AC_MSG_CHECKING([for a sed that does not truncate output]) -AC_CACHE_VAL(lt_cv_path_SED, -[# Loop through the user's path and test for sed and gsed. -# Then use that list of sed's as ones to test for truncation. -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for lt_ac_prog in sed gsed; do - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then - lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" - fi - done - done -done -lt_ac_max=0 -lt_ac_count=0 -# Add /usr/xpg4/bin/sed as it is typically found on Solaris -# along with /bin/sed that truncates output. -for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do - test ! -f $lt_ac_sed && continue - cat /dev/null > conftest.in - lt_ac_count=0 - echo $ECHO_N "0123456789$ECHO_C" >conftest.in - # Check for GNU sed and select it if it is found. - if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then - lt_cv_path_SED=$lt_ac_sed - break - fi - while true; do - cat conftest.in conftest.in >conftest.tmp - mv conftest.tmp conftest.in - cp conftest.in conftest.nl - echo >>conftest.nl - $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break - cmp -s conftest.out conftest.nl || break - # 10000 chars as input seems more than enough - test $lt_ac_count -gt 10 && break - lt_ac_count=`expr $lt_ac_count + 1` - if test $lt_ac_count -gt $lt_ac_max; then - lt_ac_max=$lt_ac_count - lt_cv_path_SED=$lt_ac_sed - fi - done -done -]) -SED=$lt_cv_path_SED -AC_MSG_RESULT([$SED]) +# @configure_input@ + +# serial 3337 ltversion.m4 +# This file is part of GNU Libtool + +m4_define([LT_PACKAGE_VERSION], [2.4.2]) +m4_define([LT_PACKAGE_REVISION], [1.3337]) + +AC_DEFUN([LTVERSION_VERSION], +[macro_version='2.4.2' +macro_revision='1.3337' +_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?]) +_LT_DECL(, macro_revision, 0) ]) -# Copyright (C) 2002, 2003, 2005 Free Software Foundation, Inc. +# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*- +# +# Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc. +# Written by Scott James Remnant, 2004. +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# serial 5 lt~obsolete.m4 + +# These exist entirely to fool aclocal when bootstrapping libtool. +# +# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN) +# which have later been changed to m4_define as they aren't part of the +# exported API, or moved to Autoconf or Automake where they belong. +# +# The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN +# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us +# using a macro with the same name in our local m4/libtool.m4 it'll +# pull the old libtool.m4 in (it doesn't see our shiny new m4_define +# and doesn't know about Autoconf macros at all.) +# +# So we provide this file, which has a silly filename so it's always +# included after everything else. This provides aclocal with the +# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything +# because those macros already exist, or will be overwritten later. +# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. +# +# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here. +# Yes, that means every name once taken will need to remain here until +# we give up compatibility with versions before 1.7, at which point +# we need to keep only those names which we still refer to. + +# This is to help aclocal find these macros, as it can't see m4_define. +AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])]) + +m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])]) +m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])]) +m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])]) +m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])]) +m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])]) +m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])]) +m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])]) +m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])]) +m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])]) +m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])]) +m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])]) +m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])]) +m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])]) +m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])]) +m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])]) +m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])]) +m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])]) +m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])]) +m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])]) +m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])]) +m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])]) +m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])]) +m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])]) +m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])]) +m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])]) +m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])]) +m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])]) +m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])]) +m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])]) +m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])]) +m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])]) +m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])]) +m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])]) +m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])]) +m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])]) +m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])]) +m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])]) +m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])]) +m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])]) +m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])]) +m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])]) +m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])]) +m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])]) +m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])]) +m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])]) +m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])]) +m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])]) +m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])]) +m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])]) +m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])]) +m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS], [AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])]) +m4_ifndef([_LT_AC_PROG_CXXCPP], [AC_DEFUN([_LT_AC_PROG_CXXCPP])]) +m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS], [AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])]) +m4_ifndef([_LT_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])]) +m4_ifndef([_LT_PROG_F77], [AC_DEFUN([_LT_PROG_F77])]) +m4_ifndef([_LT_PROG_FC], [AC_DEFUN([_LT_PROG_FC])]) +m4_ifndef([_LT_PROG_CXX], [AC_DEFUN([_LT_PROG_CXX])]) + +# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -6293,14 +8635,31 @@ AC_MSG_RESULT([$SED]) # ---------------------------- # Automake X.Y traces this macro to ensure aclocal.m4 has been # generated from the m4 files accompanying Automake X.Y. -AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"]) +# (This private macro should not be called outside this file.) +AC_DEFUN([AM_AUTOMAKE_VERSION], +[am__api_version='1.11' +dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to +dnl require some minimum version. Point them to the right macro. +m4_if([$1], [1.11.1], [], + [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl +]) + +# _AM_AUTOCONF_VERSION(VERSION) +# ----------------------------- +# aclocal traces this macro to find the Autoconf version. +# This is a private macro too. Using m4_define simplifies +# the logic in aclocal, which can simply ignore this definition. +m4_define([_AM_AUTOCONF_VERSION], []) # AM_SET_CURRENT_AUTOMAKE_VERSION # ------------------------------- -# Call AM_AUTOMAKE_VERSION so it can be traced. -# This function is AC_REQUIREd by AC_INIT_AUTOMAKE. +# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. +# This function is AC_REQUIREd by AM_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], - [AM_AUTOMAKE_VERSION([1.9.6])]) +[AM_AUTOMAKE_VERSION([1.11.1])dnl +m4_ifndef([AC_AUTOCONF_VERSION], + [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) # AM_AUX_DIR_EXPAND -*- Autoconf -*- @@ -6357,14 +8716,14 @@ am_aux_dir=`cd $ac_aux_dir && pwd` # AM_CONDITIONAL -*- Autoconf -*- -# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005 +# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 7 +# serial 9 # AM_CONDITIONAL(NAME, SHELL-CONDITION) # ------------------------------------- @@ -6373,8 +8732,11 @@ AC_DEFUN([AM_CONDITIONAL], [AC_PREREQ(2.52)dnl ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl -AC_SUBST([$1_TRUE]) -AC_SUBST([$1_FALSE]) +AC_SUBST([$1_TRUE])dnl +AC_SUBST([$1_FALSE])dnl +_AM_SUBST_NOTMAKE([$1_TRUE])dnl +_AM_SUBST_NOTMAKE([$1_FALSE])dnl +m4_define([_AM_COND_VALUE_$1], [$2])dnl if $2; then $1_TRUE= $1_FALSE='#' @@ -6388,15 +8750,14 @@ AC_CONFIG_COMMANDS_PRE( Usually this means the macro was only invoked conditionally.]]) fi])]) - -# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 8 +# serial 10 # There are a few dirty hacks below to avoid letting `AC_PROG_CC' be # written in clear, in which case automake, when reading aclocal.m4, @@ -6424,6 +8785,7 @@ AC_REQUIRE([AM_DEP_TRACK])dnl ifelse([$1], CC, [depcc="$CC" am_compiler_list=], [$1], CXX, [depcc="$CXX" am_compiler_list=], [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], + [$1], UPC, [depcc="$UPC" am_compiler_list=], [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], [depcc="$$1" am_compiler_list=]) @@ -6452,6 +8814,16 @@ AC_CACHE_CHECK([dependency style of $dep if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` fi + am__universal=false + m4_case([$1], [CC], + [case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac], + [CXX], + [case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac]) + for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and @@ -6469,7 +8841,17 @@ AC_CACHE_CHECK([dependency style of $dep done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested @@ -6479,18 +8861,23 @@ AC_CACHE_CHECK([dependency style of $dep break fi ;; + msvisualcpp | msvcmsys) + # This compiler won't grok `-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; none) break ;; esac - # We check with `-c' and `-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. if depmode=$depmode \ - source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ + source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message @@ -6541,61 +8928,74 @@ if test "x$enable_dependency_tracking" ! AMDEPBACKSLASH='\' fi AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) -AC_SUBST([AMDEPBACKSLASH]) +AC_SUBST([AMDEPBACKSLASH])dnl +_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl ]) # Generate code to set up dependency tracking. -*- Autoconf -*- -# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -#serial 3 +#serial 5 # _AM_OUTPUT_DEPENDENCY_COMMANDS # ------------------------------ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], -[for mf in $CONFIG_FILES; do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named `Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # So let's grep whole file. - if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then - dirpart=`AS_DIRNAME("$mf")` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running `make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # When using ansi2knr, U may be empty or an underscore; expand it - U=`sed -n 's/^U = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`AS_DIRNAME(["$file"])` - AS_MKDIR_P([$dirpart/$fdir]) - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" +[{ + # Autoconf 2.62 quotes --file arguments for eval, but not when files + # are listed without --file. Let's play safe and only enable the eval + # if we detect the quoting. + case $CONFIG_FILES in + *\'*) eval set x "$CONFIG_FILES" ;; + *) set x $CONFIG_FILES ;; + esac + shift + for mf + do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named `Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then + dirpart=`AS_DIRNAME("$mf")` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # When using ansi2knr, U may be empty or an underscore; expand it + U=`sed -n 's/^U = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`AS_DIRNAME(["$file"])` + AS_MKDIR_P([$dirpart/$fdir]) + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done done -done +} ])# _AM_OUTPUT_DEPENDENCY_COMMANDS @@ -6614,14 +9014,14 @@ AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS] # Do all the work for Automake. -*- Autoconf -*- -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 -# Free Software Foundation, Inc. +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, +# 2005, 2006, 2008, 2009 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 12 +# serial 16 # This macro actually does too much. Some checks are only needed if # your package does certain things. But this isn't really a big deal. @@ -6638,16 +9038,20 @@ AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS] # arguments mandatory, and then we can depend on a new Autoconf # release and drop the old call support. AC_DEFUN([AM_INIT_AUTOMAKE], -[AC_PREREQ([2.58])dnl +[AC_PREREQ([2.62])dnl dnl Autoconf wants to disallow AM_ names. We explicitly allow dnl the ones we care about. m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl AC_REQUIRE([AC_PROG_INSTALL])dnl -# test to see if srcdir already configured -if test "`cd $srcdir && pwd`" != "`pwd`" && - test -f $srcdir/config.status; then - AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) + fi fi # test whether we have cygpath @@ -6667,6 +9071,9 @@ m4_ifval([$2], AC_SUBST([PACKAGE], [$1])dnl AC_SUBST([VERSION], [$2])], [_AM_SET_OPTIONS([$1])dnl +dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. +m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,, + [m4_fatal([AC_INIT should be called with package and version arguments])])dnl AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl @@ -6682,8 +9089,8 @@ AM_MISSING_PROG(AUTOCONF, autoconf) AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) AM_MISSING_PROG(AUTOHEADER, autoheader) AM_MISSING_PROG(MAKEINFO, makeinfo) -AM_PROG_INSTALL_SH -AM_PROG_INSTALL_STRIP +AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl AC_REQUIRE([AM_PROG_MKDIR_P])dnl # We need awk for the "check" target. The system "awk" is bad on # some platforms. @@ -6691,20 +9098,37 @@ AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AM_SET_LEADING_DOT])dnl _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], - [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], - [_AM_PROG_TAR([v7])])]) + [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], + [_AM_PROG_TAR([v7])])]) _AM_IF_OPTION([no-dependencies],, [AC_PROVIDE_IFELSE([AC_PROG_CC], - [_AM_DEPENDENCIES(CC)], - [define([AC_PROG_CC], - defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl + [_AM_DEPENDENCIES(CC)], + [define([AC_PROG_CC], + defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl AC_PROVIDE_IFELSE([AC_PROG_CXX], - [_AM_DEPENDENCIES(CXX)], - [define([AC_PROG_CXX], - defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl + [_AM_DEPENDENCIES(CXX)], + [define([AC_PROG_CXX], + defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl +AC_PROVIDE_IFELSE([AC_PROG_OBJC], + [_AM_DEPENDENCIES(OBJC)], + [define([AC_PROG_OBJC], + defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl ]) +_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl +dnl The `parallel-tests' driver may need to know about EXEEXT, so add the +dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro +dnl is hooked onto _AC_COMPILER_EXEEXT early, see below. +AC_CONFIG_COMMANDS_PRE(dnl +[m4_provide_if([_AM_COMPILER_EXEEXT], + [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl ]) +dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion. Do not +dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further +dnl mangled by Autoconf and run in a shell conditional statement. +m4_define([_AC_COMPILER_EXEEXT], +m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) + # When config.status generates a header, we must update the stamp-h file. # This file resides in the same directory as the config header @@ -6715,18 +9139,19 @@ AC_PROVIDE_IFELSE([AC_PROG_CXX], # our stamp files there. AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], [# Compute $1's index in $config_headers. +_am_arg=$1 _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in - $1 | $1:* ) + $_am_arg | $_am_arg:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done -echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count]) +echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) -# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. +# Copyright (C) 2001, 2003, 2005, 2008 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -6737,7 +9162,14 @@ echo "timestamp for $1" >`AS_DIRNAME([$1 # Define $install_sh. AC_DEFUN([AM_PROG_INSTALL_SH], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -install_sh=${install_sh-"$am_aux_dir/install-sh"} +if test x"${install_sh}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; + *) + install_sh="\${SHELL} $am_aux_dir/install-sh" + esac +fi AC_SUBST(install_sh)]) # Copyright (C) 2003, 2005 Free Software Foundation, Inc. @@ -6763,13 +9195,13 @@ AC_SUBST([am__leading_dot])]) # Check to see how 'make' treats includes. -*- Autoconf -*- -# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. +# Copyright (C) 2001, 2002, 2003, 2005, 2009 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 3 +# serial 4 # AM_MAKE_INCLUDE() # ----------------- @@ -6778,7 +9210,7 @@ AC_DEFUN([AM_MAKE_INCLUDE], [am_make=${MAKE-make} cat > confinc << 'END' am__doit: - @echo done + @echo this is the am__doit target .PHONY: am__doit END # If we don't find an include directive, just comment out the code. @@ -6788,24 +9220,24 @@ am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf -# We grep out `Entering directory' and `Leaving directory' -# messages which can occur if `w' ends up in MAKEFLAGS. -# In particular we don't look at `^make:' because GNU make might -# be invoked under some other name (usually "gmake"), in which -# case it prints its new name instead of `make'. -if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then - am__include=include - am__quote= - _am_result=GNU -fi +# Ignore all kinds of additional output from `make'. +case `$am_make -s -f confmf 2> /dev/null` in #( +*the\ am__doit\ target*) + am__include=include + am__quote= + _am_result=GNU + ;; +esac # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf - if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then - am__include=.include - am__quote="\"" - _am_result=BSD - fi + case `$am_make -s -f confmf 2> /dev/null` in #( + *the\ am__doit\ target*) + am__include=.include + am__quote="\"" + _am_result=BSD + ;; + esac fi AC_SUBST([am__include]) AC_SUBST([am__quote]) @@ -6815,14 +9247,14 @@ rm -f confinc confmf # Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- -# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005 +# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 4 +# serial 6 # AM_MISSING_PROG(NAME, PROGRAM) # ------------------------------ @@ -6838,7 +9270,15 @@ AC_SUBST($1)]) # If it does, set am_missing_run to use it, otherwise, to nothing. AC_DEFUN([AM_MISSING_HAS_RUN], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" +AC_REQUIRE_AUX_FILE([missing])dnl +if test x"${MISSING+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; + *) + MISSING="\${SHELL} $am_aux_dir/missing" ;; + esac +fi # Use eval to expand $SHELL if eval "$MISSING --run true"; then am_missing_run="$MISSING --run " @@ -6848,7 +9288,7 @@ else fi ]) -# Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc. +# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -6856,70 +9296,33 @@ fi # AM_PROG_MKDIR_P # --------------- -# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise. -# -# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories -# created by `make install' are always world readable, even if the -# installer happens to have an overly restrictive umask (e.g. 077). -# This was a mistake. There are at least two reasons why we must not -# use `-m 0755': -# - it causes special bits like SGID to be ignored, -# - it may be too restrictive (some setups expect 775 directories). -# -# Do not use -m 0755 and let people choose whatever they expect by -# setting umask. -# -# We cannot accept any implementation of `mkdir' that recognizes `-p'. -# Some implementations (such as Solaris 8's) are not thread-safe: if a -# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c' -# concurrently, both version can detect that a/ is missing, but only -# one can create it and the other will error out. Consequently we -# restrict ourselves to GNU make (using the --version option ensures -# this.) +# Check for `mkdir -p'. AC_DEFUN([AM_PROG_MKDIR_P], -[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then - # We used to keeping the `.' as first argument, in order to - # allow $(mkdir_p) to be used without argument. As in - # $(mkdir_p) $(somedir) - # where $(somedir) is conditionally defined. However this is wrong - # for two reasons: - # 1. if the package is installed by a user who cannot write `.' - # make install will fail, - # 2. the above comment should most certainly read - # $(mkdir_p) $(DESTDIR)$(somedir) - # so it does not work when $(somedir) is undefined and - # $(DESTDIR) is not. - # To support the latter case, we have to write - # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), - # so the `.' trick is pointless. - mkdir_p='mkdir -p --' -else - # On NextStep and OpenStep, the `mkdir' command does not - # recognize any option. It will interpret all options as - # directories to create, and then abort because `.' already - # exists. - for d in ./-p ./--version; - do - test -d $d && rmdir $d - done - # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. - if test -f "$ac_aux_dir/mkinstalldirs"; then - mkdir_p='$(mkinstalldirs)' - else - mkdir_p='$(install_sh) -d' - fi -fi -AC_SUBST([mkdir_p])]) +[AC_PREREQ([2.60])dnl +AC_REQUIRE([AC_PROG_MKDIR_P])dnl +dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P, +dnl while keeping a definition of mkdir_p for backward compatibility. +dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile. +dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of +dnl Makefile.ins that do not define MKDIR_P, so we do our own +dnl adjustment using top_builddir (which is defined more often than +dnl MKDIR_P). +AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl +case $mkdir_p in + [[\\/$]]* | ?:[[\\/]]*) ;; + */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; +esac +]) # Helper functions for option handling. -*- Autoconf -*- -# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. +# Copyright (C) 2001, 2002, 2003, 2005, 2008 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 3 +# serial 4 # _AM_MANGLE_OPTION(NAME) # ----------------------- @@ -6936,7 +9339,7 @@ AC_DEFUN([_AM_SET_OPTION], # ---------------------------------- # OPTIONS is a space-separated list of Automake options. AC_DEFUN([_AM_SET_OPTIONS], -[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) +[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) # _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) # ------------------------------------------- @@ -6946,14 +9349,14 @@ AC_DEFUN([_AM_IF_OPTION], # Check to make sure that the build environment is sane. -*- Autoconf -*- -# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 +# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 4 +# serial 5 # AM_SANITY_CHECK # --------------- @@ -6962,16 +9365,29 @@ AC_DEFUN([AM_SANITY_CHECK], # Just in case sleep 1 echo timestamp > conftest.file +# Reject unsafe characters in $srcdir or the absolute working directory +# name. Accept space and tab only in the latter. +am_lf=' +' +case `pwd` in + *[[\\\"\#\$\&\'\`$am_lf]]*) + AC_MSG_ERROR([unsafe absolute working directory name]);; +esac +case $srcdir in + *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) + AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);; +esac + # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( - set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` if test "$[*]" = "X"; then # -L didn't work. - set X `ls -t $srcdir/configure conftest.file` + set X `ls -t "$srcdir/configure" conftest.file` fi rm -f conftest.file if test "$[*]" != "X $srcdir/configure conftest.file" \ @@ -7021,9 +9437,28 @@ dnl Don't test for $cross_compiling = ye if test "$cross_compiling" != no; then AC_CHECK_TOOL([STRIP], [strip], :) fi -INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) +# Copyright (C) 2006, 2008 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 2 + +# _AM_SUBST_NOTMAKE(VARIABLE) +# --------------------------- +# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. +# This macro is traced by Automake. +AC_DEFUN([_AM_SUBST_NOTMAKE]) + +# AM_SUBST_NOTMAKE(VARIABLE) +# --------------------------- +# Public sister of _AM_SUBST_NOTMAKE. +AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) + # Check how to create a tarball. -*- Autoconf -*- # Copyright (C) 2004, 2005 Free Software Foundation, Inc. --- libcoyotl-3.1.0.orig/configure +++ libcoyotl-3.1.0/configure @@ -1,81 +1,431 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.59. +# Generated by GNU Autoconf 2.68. +# +# +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, +# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software +# Foundation, Inc. +# # -# Copyright (C) 2003 Free Software Foundation, Inc. # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. -## --------------------- ## -## M4sh Initialization. ## -## --------------------- ## +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## -# Be Bourne compatible -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' -elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then - set -o posix + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac fi -DUALCASE=1; export DUALCASE # for MKS sh -# Support unset when possible. -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - as_unset=unset -else - as_unset=false + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in #( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' fi +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +as_myself= +case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi -# Work around bugs in pre-3.0 UWIN ksh. -$as_unset ENV MAIL MAILPATH +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. -for as_var in \ - LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ - LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ - LC_TELEPHONE LC_TIME +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +if test "x$CONFIG_SHELL" = x; then + as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which + # is contrary to our usage. Disable this feature. + alias -g '\${1+\"\$@\"}'='\"\$@\"' + setopt NO_GLOB_SUBST +else + case \`(set -o) 2>/dev/null\` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi +" + as_required="as_fn_return () { (exit \$1); } +as_fn_success () { as_fn_return 0; } +as_fn_failure () { as_fn_return 1; } +as_fn_ret_success () { return 0; } +as_fn_ret_failure () { return 1; } + +exitcode=0 +as_fn_success || { exitcode=1; echo as_fn_success failed.; } +as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } +as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } +as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } +if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : + +else + exitcode=1; echo positional parameters were not saved. +fi +test x\$exitcode = x0 || exit 1" + as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO + as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO + eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && + test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 + + test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || ( + ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' + ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO + ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO + PATH=/empty FPATH=/empty; export PATH FPATH + test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\ + || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1 +test \$(( 1 + 1 )) = 2 || exit 1" + if (eval "$as_required") 2>/dev/null; then : + as_have_required=yes +else + as_have_required=no +fi + if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : + +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +as_found=false +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do - if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then - eval $as_var=C; export $as_var - else - $as_unset $as_var - fi + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + as_found=: + case $as_dir in #( + /*) + for as_base in sh bash ksh sh5; do + # Try only shells that exist, to save several forks. + as_shell=$as_dir/$as_base + if { test -f "$as_shell" || test -f "$as_shell.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : + CONFIG_SHELL=$as_shell as_have_required=yes + if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : + break 2 +fi +fi + done;; + esac + as_found=false done +$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : + CONFIG_SHELL=$SHELL as_have_required=yes +fi; } +IFS=$as_save_IFS + + + if test "x$CONFIG_SHELL" != x; then : + # We cannot yet assume a decent shell, so we have to provide a + # neutralization value for shells without unset; and this also + # works around shells that cannot unset nonexistent variables. + # Preserve -v and -x to the replacement shell. + BASH_ENV=/dev/null + ENV=/dev/null + (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV + export CONFIG_SHELL + case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; + esac + exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"} +fi + + if test x$as_have_required = xno; then : + $as_echo "$0: This script requires a shell more modern than all" + $as_echo "$0: the shells that I found on your system." + if test x${ZSH_VERSION+set} = xset ; then + $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" + $as_echo "$0: be upgraded to zsh 4.3.4 or later." + else + $as_echo "$0: Please tell bug-autoconf@gnu.org about your system, +$0: including any error possibly output before this +$0: message. Then install a modern shell, or manually run +$0: the script under such a shell if you do have one." + fi + exit 1 +fi +fi +fi +SHELL=${CONFIG_SHELL-/bin/sh} +export SHELL +# Unset more variables known to interfere with behavior of common tools. +CLICOLOR_FORCE= GREP_OPTIONS= +unset CLICOLOR_FORCE GREP_OPTIONS + +## --------------------- ## +## M4sh Shell Functions. ## +## --------------------- ## +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} # as_fn_mkdir_p +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith + -# Required to use basename. -if expr a : '\(a\)' >/dev/null 2>&1; then +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi -if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi -# Name of the executable. -as_me=`$as_basename "$0" || +as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)$' \| \ - . : '\(.\)' 2>/dev/null || -echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } - /^X\/\(\/\/\)$/{ s//\1/; q; } - /^X\/\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` - -# PATH needs CR, and LINENO needs CR and PATH. # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' @@ -83,146 +433,107 @@ as_cr_Letters=$as_cr_letters$as_cr_LETTE as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conf$$.sh -fi - - - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" || { - # Find who we are. Look in the path if we contain no path at all - # relative or not. - case $0 in - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -done - - ;; - esac - # We did not find ourselves, most probably we were run as `sh COMMAND' - # in which case we are not to be found in the path. - if test "x$as_myself" = x; then - as_myself=$0 - fi - if test ! -f "$as_myself"; then - { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 - { (exit 1); exit 1; }; } - fi - case $CONFIG_SHELL in - '') - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for as_base in sh bash ksh sh5; do - case $as_dir in - /*) - if ("$as_dir/$as_base" -c ' - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then - $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } - $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } - CONFIG_SHELL=$as_dir/$as_base - export CONFIG_SHELL - exec "$CONFIG_SHELL" "$0" ${1+"$@"} - fi;; - esac - done -done -;; - esac - # Create $as_me.lineno as a copy of $as_myself, but with $LINENO - # uniformly replaced by the line number. The first 'sed' inserts a - # line-number line before each line; the second 'sed' does the real - # work. The second script uses 'N' to pair each line-number line - # with the numbered line, and appends trailing '-' during - # substitution so that $LINENO is not a special case at line end. - # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the - # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) - sed '=' <$as_myself | + as_lineno_1=$LINENO as_lineno_1a=$LINENO + as_lineno_2=$LINENO as_lineno_2a=$LINENO + eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && + test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { + # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno N - s,$,-, - : loop - s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ t loop - s,-$,, - s,^['$as_cr_digits']*\n,, + s/-\n.*// ' >$as_me.lineno && - chmod +x $as_me.lineno || - { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 - { (exit 1); exit 1; }; } + chmod +x "$as_me.lineno" || + { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensible to this). - . ./$as_me.lineno + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" # Exit status is that of the last command. exit } - -case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in - *c*,-n*) ECHO_N= ECHO_C=' -' ECHO_T=' ' ;; - *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; - *) ECHO_N= ECHO_C='\c' ECHO_T= ;; +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in #((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; esac -if expr a : '\(a\)' >/dev/null 2>&1; then - as_expr=expr +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file else - as_expr=false + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null fi - -rm -f conf$$ conf$$.exe conf$$.file -echo >conf$$.file -if ln -s conf$$.file conf$$ 2>/dev/null; then - # We could just check for DJGPP; but this test a) works b) is more generic - # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). - if test -f conf$$.exe; then - # Don't use ln at all; we don't have any links - as_ln_s='cp -p' - else +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -p'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -p' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -p' fi -elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln else as_ln_s='cp -p' fi -rm -f conf$$ conf$$.exe conf$$.file +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null if mkdir -p . 2>/dev/null; then - as_mkdir_p=: + as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false fi -as_executable_p="test -f" +if test -x / >/dev/null 2>&1; then + as_test_x='test -x' +else + if ls -dL / >/dev/null 2>&1; then + as_ls_L_option=L + else + as_ls_L_option= + fi + as_test_x=' + eval sh -c '\'' + if test -d "$1"; then + test -d "$1/."; + else + case $1 in #( + -*)set "./$1";; + esac; + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( + ???[sx]*):;;*)false;;esac;fi + '\'' sh + ' +fi +as_executable_p=$as_test_x # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" @@ -230,193 +541,28 @@ as_tr_cpp="eval sed 'y%*$as_cr_letters%P # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - -# IFS -# We need space, tab and new line, in precisely that order. -as_nl=' -' -IFS=" $as_nl" - -# CDPATH. -$as_unset CDPATH - - - -# Check that we are running under the correct shell. SHELL=${CONFIG_SHELL-/bin/sh} -case X$ECHO in -X*--fallback-echo) - # Remove one level of quotation (which was required for Make). - ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','` - ;; -esac - -echo=${ECHO-echo} -if test "X$1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift -elif test "X$1" = X--fallback-echo; then - # Avoid inline document here, it may be left over - : -elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then - # Yippee, $echo works! - : -else - # Restart under the correct shell. - exec $SHELL "$0" --no-reexec ${1+"$@"} -fi - -if test "X$1" = X--fallback-echo; then - # used as fallback echo - shift - cat </dev/null 2>&1 && unset CDPATH - -if test -z "$ECHO"; then -if test "X${echo_test_string+set}" != Xset; then -# find a string as large as possible, as long as the shell can cope with it - for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do - # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... - if (echo_test_string=`eval $cmd`) 2>/dev/null && - echo_test_string=`eval $cmd` && - (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null - then - break - fi - done -fi - -if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - : -else - # The Solaris, AIX, and Digital Unix default echo programs unquote - # backslashes. This makes it impossible to quote backslashes using - # echo "$something" | sed 's/\\/\\\\/g' - # - # So, first we look for a working echo in the user's PATH. - - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for dir in $PATH /usr/ucb; do - IFS="$lt_save_ifs" - if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && - test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$dir/echo" - break - fi - done - IFS="$lt_save_ifs" - - if test "X$echo" = Xecho; then - # We didn't find a better echo, so look for alternatives. - if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # This shell has a builtin print -r that does the trick. - echo='print -r' - elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && - test "X$CONFIG_SHELL" != X/bin/ksh; then - # If we have ksh, try running configure again with it. - ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} - export ORIGINAL_CONFIG_SHELL - CONFIG_SHELL=/bin/ksh - export CONFIG_SHELL - exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"} - else - # Try using printf. - echo='printf %s\n' - if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # Cool, printf works - : - elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL - export CONFIG_SHELL - SHELL="$CONFIG_SHELL" - export SHELL - echo="$CONFIG_SHELL $0 --fallback-echo" - elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$CONFIG_SHELL $0 --fallback-echo" - else - # maybe with a smaller string... - prev=: - - for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do - if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null - then - break - fi - prev="$cmd" - done - - if test "$prev" != 'sed 50q "$0"'; then - echo_test_string=`eval $prev` - export echo_test_string - exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"} - else - # Oops. We lost completely, so just stick with echo. - echo=echo - fi - fi - fi - fi -fi -fi - -# Copy echo and quote the copy suitably for passing to libtool from -# the Makefile, instead of quoting the original, which is used later. -ECHO=$echo -if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then - ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo" -fi - - - -tagnames=${tagnames+${tagnames},}CXX - -tagnames=${tagnames+${tagnames},}F77 +test -n "$DJDIR" || exec 7<&0 &1 # Name of the host. -# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, +# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, # so uname gets run too. ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` -exec 6>&1 - # # Initializations. # ac_default_prefix=/usr/local +ac_clean_files= ac_config_libobj_dir=. +LIBOBJS= cross_compiling=no subdirs= MFLAGS= MAKEFLAGS= -SHELL=${CONFIG_SHELL-/bin/sh} - -# Maximum number of lines to put in a shell here document. -# This variable seems obsolete. It should probably be removed, and -# only ac_max_sed_lines should be used. -: ${ac_max_here_lines=38} # Identity of this package. PACKAGE_NAME= @@ -424,51 +570,202 @@ PACKAGE_TARNAME= PACKAGE_VERSION= PACKAGE_STRING= PACKAGE_BUGREPORT= +PACKAGE_URL= ac_unique_file="libcoyotl/maze.h" # Factoring default headers for most tests. ac_includes_default="\ #include -#if HAVE_SYS_TYPES_H +#ifdef HAVE_SYS_TYPES_H # include #endif -#if HAVE_SYS_STAT_H +#ifdef HAVE_SYS_STAT_H # include #endif -#if STDC_HEADERS +#ifdef STDC_HEADERS # include # include #else -# if HAVE_STDLIB_H +# ifdef HAVE_STDLIB_H # include # endif #endif -#if HAVE_STRING_H -# if !STDC_HEADERS && HAVE_MEMORY_H +#ifdef HAVE_STRING_H +# if !defined STDC_HEADERS && defined HAVE_MEMORY_H # include # endif # include #endif -#if HAVE_STRINGS_H +#ifdef HAVE_STRINGS_H # include #endif -#if HAVE_INTTYPES_H +#ifdef HAVE_INTTYPES_H # include -#else -# if HAVE_STDINT_H -# include -# endif #endif -#if HAVE_UNISTD_H +#ifdef HAVE_STDINT_H +# include +#endif +#ifdef HAVE_UNISTD_H # include #endif" -ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS GENERIC_LIBRARY_VERSION GENERIC_LIBRARY_NAME GENERIC_RELEASE GENERIC_VERSION INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE CXX CXXFLAGS ac_ct_CXX CXXDEPMODE am__fastdepCXX_TRUE am__fastdepCXX_FALSE build build_cpu build_vendor build_os host host_cpu host_vendor host_os EGREP LN_S ECHO AR ac_ct_AR RANLIB ac_ct_RANLIB CPP CXXCPP F77 FFLAGS ac_ct_F77 LIBTOOL HAVE_DOXYGEN HAVE_DOXYGEN_TRUE HAVE_DOXYGEN_FALSE LIBOBJS LTLIBOBJS' +ac_subst_vars='am__EXEEXT_FALSE +am__EXEEXT_TRUE +LTLIBOBJS +LIBOBJS +HAVE_DOXYGEN_FALSE +HAVE_DOXYGEN_TRUE +HAVE_DOXYGEN +CXXCPP +CPP +OTOOL64 +OTOOL +LIPO +NMEDIT +DSYMUTIL +MANIFEST_TOOL +RANLIB +ac_ct_AR +AR +DLLTOOL +OBJDUMP +LN_S +NM +ac_ct_DUMPBIN +DUMPBIN +LD +FGREP +EGREP +GREP +SED +host_os +host_vendor +host_cpu +host +build_os +build_vendor +build_cpu +build +LIBTOOL +am__fastdepCXX_FALSE +am__fastdepCXX_TRUE +CXXDEPMODE +ac_ct_CXX +CXXFLAGS +CXX +am__fastdepCC_FALSE +am__fastdepCC_TRUE +CCDEPMODE +AMDEPBACKSLASH +AMDEP_FALSE +AMDEP_TRUE +am__quote +am__include +DEPDIR +OBJEXT +EXEEXT +ac_ct_CC +CPPFLAGS +LDFLAGS +CFLAGS +CC +am__untar +am__tar +AMTAR +am__leading_dot +SET_MAKE +AWK +mkdir_p +MKDIR_P +INSTALL_STRIP_PROGRAM +STRIP +install_sh +MAKEINFO +AUTOHEADER +AUTOMAKE +AUTOCONF +ACLOCAL +VERSION +PACKAGE +CYGPATH_W +am__isrc +INSTALL_DATA +INSTALL_SCRIPT +INSTALL_PROGRAM +GENERIC_VERSION +GENERIC_RELEASE +GENERIC_LIBRARY_NAME +GENERIC_LIBRARY_VERSION +target_alias +host_alias +build_alias +LIBS +ECHO_T +ECHO_N +ECHO_C +DEFS +mandir +localedir +libdir +psdir +pdfdir +dvidir +htmldir +infodir +docdir +oldincludedir +includedir +localstatedir +sharedstatedir +sysconfdir +datadir +datarootdir +libexecdir +sbindir +bindir +program_transform_name +prefix +exec_prefix +PACKAGE_URL +PACKAGE_BUGREPORT +PACKAGE_STRING +PACKAGE_VERSION +PACKAGE_TARNAME +PACKAGE_NAME +PATH_SEPARATOR +SHELL' ac_subst_files='' +ac_user_opts=' +enable_option_checking +enable_dependency_tracking +enable_shared +enable_static +with_pic +enable_fast_install +with_gnu_ld +with_sysroot +enable_libtool_lock +' + ac_precious_vars='build_alias +host_alias +target_alias +CC +CFLAGS +LDFLAGS +LIBS +CPPFLAGS +CXX +CXXFLAGS +CCC +CPP +CXXCPP' + # Initialize some variables set by options. ac_init_help= ac_init_version=false +ac_unrecognized_opts= +ac_unrecognized_sep= # The variables have the same names as the options, with # dashes changed to underlines. cache_file=/dev/null @@ -491,34 +788,49 @@ x_libraries=NONE # and all the variables that are supposed to be based on exec_prefix # by default will actually change. # Use braces instead of parens because sh, perl, etc. also accept them. +# (The list follows the same order as the GNU Coding Standards.) bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' -datadir='${prefix}/share' +datarootdir='${prefix}/share' +datadir='${datarootdir}' sysconfdir='${prefix}/etc' sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' -libdir='${exec_prefix}/lib' includedir='${prefix}/include' oldincludedir='/usr/include' -infodir='${prefix}/info' -mandir='${prefix}/man' +docdir='${datarootdir}/doc/${PACKAGE}' +infodir='${datarootdir}/info' +htmldir='${docdir}' +dvidir='${docdir}' +pdfdir='${docdir}' +psdir='${docdir}' +libdir='${exec_prefix}/lib' +localedir='${datarootdir}/locale' +mandir='${datarootdir}/man' ac_prev= +ac_dashdash= for ac_option do # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then - eval "$ac_prev=\$ac_option" + eval $ac_prev=\$ac_option ac_prev= continue fi - ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'` + case $ac_option in + *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; + *=) ac_optarg= ;; + *) ac_optarg=yes ;; + esac # Accept the important Cygnus configure options, so we can diagnose typos. - case $ac_option in + case $ac_dashdash$ac_option in + --) + ac_dashdash=yes ;; -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; @@ -540,33 +852,59 @@ do --config-cache | -C) cache_file=config.cache ;; - -datadir | --datadir | --datadi | --datad | --data | --dat | --da) + -datadir | --datadir | --datadi | --datad) ac_prev=datadir ;; - -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ - | --da=*) + -datadir=* | --datadir=* | --datadi=* | --datad=*) datadir=$ac_optarg ;; + -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ + | --dataroo | --dataro | --datar) + ac_prev=datarootdir ;; + -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ + | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) + datarootdir=$ac_optarg ;; + -disable-* | --disable-*) - ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. - expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid feature name: $ac_feature" >&2 - { (exit 1); exit 1; }; } - ac_feature=`echo $ac_feature | sed 's/-/_/g'` - eval "enable_$ac_feature=no" ;; + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=no ;; + + -docdir | --docdir | --docdi | --doc | --do) + ac_prev=docdir ;; + -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) + docdir=$ac_optarg ;; + + -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) + ac_prev=dvidir ;; + -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) + dvidir=$ac_optarg ;; -enable-* | --enable-*) - ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. - expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid feature name: $ac_feature" >&2 - { (exit 1); exit 1; }; } - ac_feature=`echo $ac_feature | sed 's/-/_/g'` - case $ac_option in - *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; - *) ac_optarg=yes ;; + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; esac - eval "enable_$ac_feature='$ac_optarg'" ;; + eval enable_$ac_useropt=\$ac_optarg ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ @@ -593,6 +931,12 @@ do -host=* | --host=* | --hos=* | --ho=*) host_alias=$ac_optarg ;; + -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) + ac_prev=htmldir ;; + -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ + | --ht=*) + htmldir=$ac_optarg ;; + -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; @@ -617,13 +961,16 @@ do | --libexe=* | --libex=* | --libe=*) libexecdir=$ac_optarg ;; + -localedir | --localedir | --localedi | --localed | --locale) + ac_prev=localedir ;; + -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) + localedir=$ac_optarg ;; + -localstatedir | --localstatedir | --localstatedi | --localstated \ - | --localstate | --localstat | --localsta | --localst \ - | --locals | --local | --loca | --loc | --lo) + | --localstate | --localstat | --localsta | --localst | --locals) ac_prev=localstatedir ;; -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ - | --localstate=* | --localstat=* | --localsta=* | --localst=* \ - | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) + | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) localstatedir=$ac_optarg ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) @@ -688,6 +1035,16 @@ do | --progr-tra=* | --program-tr=* | --program-t=*) program_transform_name=$ac_optarg ;; + -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) + ac_prev=pdfdir ;; + -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) + pdfdir=$ac_optarg ;; + + -psdir | --psdir | --psdi | --psd | --ps) + ac_prev=psdir ;; + -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) + psdir=$ac_optarg ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) silent=yes ;; @@ -738,26 +1095,36 @@ do ac_init_version=: ;; -with-* | --with-*) - ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. - expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid package name: $ac_package" >&2 - { (exit 1); exit 1; }; } - ac_package=`echo $ac_package| sed 's/-/_/g'` - case $ac_option in - *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; - *) ac_optarg=yes ;; + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" + ac_unrecognized_sep=', ';; esac - eval "with_$ac_package='$ac_optarg'" ;; + eval with_$ac_useropt=\$ac_optarg ;; -without-* | --without-*) - ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` + ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. - expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid package name: $ac_package" >&2 - { (exit 1); exit 1; }; } - ac_package=`echo $ac_package | sed 's/-/_/g'` - eval "with_$ac_package=no" ;; + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=no ;; --x) # Obsolete; use --with-x. @@ -777,27 +1144,26 @@ do | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries=$ac_optarg ;; - -*) { echo "$as_me: error: unrecognized option: $ac_option -Try \`$0 --help' for more information." >&2 - { (exit 1); exit 1; }; } + -*) as_fn_error $? "unrecognized option: \`$ac_option' +Try \`$0 --help' for more information" ;; *=*) ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` # Reject names that are not valid shell variable names. - expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 - { (exit 1); exit 1; }; } - ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` - eval "$ac_envvar='$ac_optarg'" + case $ac_envvar in #( + '' | [0-9]* | *[!_$as_cr_alnum]* ) + as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; + esac + eval $ac_envvar=\$ac_optarg export $ac_envvar ;; *) # FIXME: should be removed in autoconf 3.0. - echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && - echo "$as_me: WARNING: invalid host type: $ac_option" >&2 - : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} + $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" ;; esac @@ -805,31 +1171,36 @@ done if test -n "$ac_prev"; then ac_option=--`echo $ac_prev | sed 's/_/-/g'` - { echo "$as_me: error: missing argument to $ac_option" >&2 - { (exit 1); exit 1; }; } + as_fn_error $? "missing argument to $ac_option" fi -# Be sure to have absolute paths. -for ac_var in exec_prefix prefix -do - eval ac_val=$`echo $ac_var` - case $ac_val in - [\\/$]* | ?:[\\/]* | NONE | '' ) ;; - *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 - { (exit 1); exit 1; }; };; +if test -n "$ac_unrecognized_opts"; then + case $enable_option_checking in + no) ;; + fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; + *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; esac -done +fi -# Be sure to have absolute paths. -for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ - localstatedir libdir includedir oldincludedir infodir mandir +# Check all directory arguments for consistency. +for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ + datadir sysconfdir sharedstatedir localstatedir includedir \ + oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ + libdir localedir mandir do - eval ac_val=$`echo $ac_var` + eval ac_val=\$$ac_var + # Remove trailing slashes. + case $ac_val in + */ ) + ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` + eval $ac_var=\$ac_val;; + esac + # Be sure to have absolute directory names. case $ac_val in - [\\/$]* | ?:[\\/]* ) ;; - *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 - { (exit 1); exit 1; }; };; + [\\/$]* | ?:[\\/]* ) continue;; + NONE | '' ) case $ac_var in *prefix ) continue;; esac;; esac + as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" done # There might be people who depend on the old broken behavior: `$host' @@ -843,8 +1214,8 @@ target=$target_alias if test "x$host_alias" != x; then if test "x$build_alias" = x; then cross_compiling=maybe - echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. - If a cross compiler is detected then cross compile mode will be used." >&2 + $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host. + If a cross compiler is detected then cross compile mode will be used" >&2 elif test "x$build_alias" != "x$host_alias"; then cross_compiling=yes fi @@ -856,22 +1227,41 @@ test -n "$host_alias" && ac_tool_prefix= test "$silent" = yes && exec 6>/dev/null +ac_pwd=`pwd` && test -n "$ac_pwd" && +ac_ls_di=`ls -di .` && +ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || + as_fn_error $? "working directory cannot be determined" +test "X$ac_ls_di" = "X$ac_pwd_ls_di" || + as_fn_error $? "pwd does not report name of working directory" + + # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes - # Try the directory containing this script, then its parent. - ac_confdir=`(dirname "$0") 2>/dev/null || -$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$0" : 'X\(//\)[^/]' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$0" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` + # Try the directory containing this script, then the parent directory. + ac_confdir=`$as_dirname -- "$as_myself" || +$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_myself" : 'X\(//\)[^/]' \| \ + X"$as_myself" : 'X\(//\)$' \| \ + X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_myself" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` srcdir=$ac_confdir if test ! -r "$srcdir/$ac_unique_file"; then srcdir=.. @@ -880,70 +1270,29 @@ else ac_srcdir_defaulted=no fi if test ! -r "$srcdir/$ac_unique_file"; then - if test "$ac_srcdir_defaulted" = yes; then - { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 - { (exit 1); exit 1; }; } - else - { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 - { (exit 1); exit 1; }; } - fi + test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." + as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" fi -(cd $srcdir && test -r "./$ac_unique_file") 2>/dev/null || - { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 - { (exit 1); exit 1; }; } -srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` -ac_env_build_alias_set=${build_alias+set} -ac_env_build_alias_value=$build_alias -ac_cv_env_build_alias_set=${build_alias+set} -ac_cv_env_build_alias_value=$build_alias -ac_env_host_alias_set=${host_alias+set} -ac_env_host_alias_value=$host_alias -ac_cv_env_host_alias_set=${host_alias+set} -ac_cv_env_host_alias_value=$host_alias -ac_env_target_alias_set=${target_alias+set} -ac_env_target_alias_value=$target_alias -ac_cv_env_target_alias_set=${target_alias+set} -ac_cv_env_target_alias_value=$target_alias -ac_env_CC_set=${CC+set} -ac_env_CC_value=$CC -ac_cv_env_CC_set=${CC+set} -ac_cv_env_CC_value=$CC -ac_env_CFLAGS_set=${CFLAGS+set} -ac_env_CFLAGS_value=$CFLAGS -ac_cv_env_CFLAGS_set=${CFLAGS+set} -ac_cv_env_CFLAGS_value=$CFLAGS -ac_env_LDFLAGS_set=${LDFLAGS+set} -ac_env_LDFLAGS_value=$LDFLAGS -ac_cv_env_LDFLAGS_set=${LDFLAGS+set} -ac_cv_env_LDFLAGS_value=$LDFLAGS -ac_env_CPPFLAGS_set=${CPPFLAGS+set} -ac_env_CPPFLAGS_value=$CPPFLAGS -ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set} -ac_cv_env_CPPFLAGS_value=$CPPFLAGS -ac_env_CXX_set=${CXX+set} -ac_env_CXX_value=$CXX -ac_cv_env_CXX_set=${CXX+set} -ac_cv_env_CXX_value=$CXX -ac_env_CXXFLAGS_set=${CXXFLAGS+set} -ac_env_CXXFLAGS_value=$CXXFLAGS -ac_cv_env_CXXFLAGS_set=${CXXFLAGS+set} -ac_cv_env_CXXFLAGS_value=$CXXFLAGS -ac_env_CPP_set=${CPP+set} -ac_env_CPP_value=$CPP -ac_cv_env_CPP_set=${CPP+set} -ac_cv_env_CPP_value=$CPP -ac_env_CXXCPP_set=${CXXCPP+set} -ac_env_CXXCPP_value=$CXXCPP -ac_cv_env_CXXCPP_set=${CXXCPP+set} -ac_cv_env_CXXCPP_value=$CXXCPP -ac_env_F77_set=${F77+set} -ac_env_F77_value=$F77 -ac_cv_env_F77_set=${F77+set} -ac_cv_env_F77_value=$F77 -ac_env_FFLAGS_set=${FFLAGS+set} -ac_env_FFLAGS_value=$FFLAGS -ac_cv_env_FFLAGS_set=${FFLAGS+set} -ac_cv_env_FFLAGS_value=$FFLAGS +ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" +ac_abs_confdir=`( + cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" + pwd)` +# When building in place, set srcdir=. +if test "$ac_abs_confdir" = "$ac_pwd"; then + srcdir=. +fi +# Remove unnecessary trailing slashes from srcdir. +# Double slashes in file names in object file debugging info +# mess up M-x gdb in Emacs. +case $srcdir in +*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; +esac +for ac_var in $ac_precious_vars; do + eval ac_env_${ac_var}_set=\${${ac_var}+set} + eval ac_env_${ac_var}_value=\$${ac_var} + eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} + eval ac_cv_env_${ac_var}_value=\$${ac_var} +done # # Report the --help message. @@ -966,20 +1315,17 @@ Configuration: --help=short display options specific to this package --help=recursive display the short help of all the included packages -V, --version display version information and exit - -q, --quiet, --silent do not print \`checking...' messages + -q, --quiet, --silent do not print \`checking ...' messages --cache-file=FILE cache test results in FILE [disabled] -C, --config-cache alias for \`--cache-file=config.cache' -n, --no-create do not create output files --srcdir=DIR find the sources in DIR [configure dir or \`..'] -_ACEOF - - cat <<_ACEOF Installation directories: --prefix=PREFIX install architecture-independent files in PREFIX - [$ac_default_prefix] + [$ac_default_prefix] --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - [PREFIX] + [PREFIX] By default, \`make install' will install all the files in \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify @@ -989,18 +1335,25 @@ for instance \`--prefix=\$HOME'. For better control, use the options below. Fine tuning of the installation directories: - --bindir=DIR user executables [EPREFIX/bin] - --sbindir=DIR system admin executables [EPREFIX/sbin] - --libexecdir=DIR program executables [EPREFIX/libexec] - --datadir=DIR read-only architecture-independent data [PREFIX/share] - --sysconfdir=DIR read-only single-machine data [PREFIX/etc] - --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] - --localstatedir=DIR modifiable single-machine data [PREFIX/var] - --libdir=DIR object code libraries [EPREFIX/lib] - --includedir=DIR C header files [PREFIX/include] - --oldincludedir=DIR C header files for non-gcc [/usr/include] - --infodir=DIR info documentation [PREFIX/info] - --mandir=DIR man documentation [PREFIX/man] + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] + --datadir=DIR read-only architecture-independent data [DATAROOTDIR] + --infodir=DIR info documentation [DATAROOTDIR/info] + --localedir=DIR locale-dependent data [DATAROOTDIR/locale] + --mandir=DIR man documentation [DATAROOTDIR/man] + --docdir=DIR documentation root [DATAROOTDIR/doc/PACKAGE] + --htmldir=DIR html documentation [DOCDIR] + --dvidir=DIR dvi documentation [DOCDIR] + --pdfdir=DIR pdf documentation [DOCDIR] + --psdir=DIR ps documentation [DOCDIR] _ACEOF cat <<\_ACEOF @@ -1021,14 +1374,13 @@ if test -n "$ac_init_help"; then cat <<\_ACEOF Optional Features: + --disable-option-checking ignore unrecognized --enable/--with options --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] --disable-dependency-tracking speeds up one-time build --enable-dependency-tracking do not reject slow dependency extractors - --enable-shared[=PKGS] - build shared libraries [default=yes] - --enable-static[=PKGS] - build static libraries [default=yes] + --enable-shared[=PKGS] build shared libraries [default=yes] + --enable-static[=PKGS] build static libraries [default=yes] --enable-fast-install[=PKGS] optimize for fast installation [default=yes] --disable-libtool-lock avoid locking (might break parallel builds) @@ -1036,142 +1388,680 @@ Optional Features: Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) - --with-gnu-ld assume the C compiler uses GNU ld [default=no] - --with-pic try to use only PIC/non-PIC objects [default=use + --with-pic[=PKGS] try to use only PIC/non-PIC objects [default=use both] - --with-tags[=TAGS] - include additional configurations [automatic] + --with-gnu-ld assume the C compiler uses GNU ld [default=no] + --with-sysroot=DIR Search for dependent libraries within DIR + (or the compiler's sysroot if not specified). Some influential environment variables: CC C compiler command CFLAGS C compiler flags LDFLAGS linker flags, e.g. -L if you have libraries in a nonstandard directory - CPPFLAGS C/C++ preprocessor flags, e.g. -I if you have - headers in a nonstandard directory + LIBS libraries to pass to the linker, e.g. -l + CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if + you have headers in a nonstandard directory CXX C++ compiler command CXXFLAGS C++ compiler flags CPP C preprocessor CXXCPP C++ preprocessor - F77 Fortran 77 compiler command - FFLAGS Fortran 77 compiler flags Use these variables to override the choices made by `configure' or to help it to find libraries and programs with nonstandard names/locations. +Report bugs to the package provider. _ACEOF +ac_status=$? fi if test "$ac_init_help" = "recursive"; then # If there are subdirs, report their specific --help. - ac_popdir=`pwd` for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue - test -d $ac_dir || continue + test -d "$ac_dir" || + { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || + continue ac_builddir=. -if test "$ac_dir" != .; then - ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` - # A "../" for each directory in $ac_dir_suffix. - ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` -else - ac_dir_suffix= ac_top_builddir= -fi +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix case $srcdir in - .) # No --srcdir option. We are building in place. + .) # We are building in place. ac_srcdir=. - if test -z "$ac_top_builddir"; then - ac_top_srcdir=. - else - ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` - fi ;; - [\\/]* | ?:[\\/]* ) # Absolute path. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir ;; - *) # Relative path. - ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_builddir$srcdir ;; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix -# Do not use `cd foo && pwd` to compute absolute paths, because -# the directories may not exist. -case `pwd` in -.) ac_abs_builddir="$ac_dir";; -*) - case "$ac_dir" in - .) ac_abs_builddir=`pwd`;; - [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; - *) ac_abs_builddir=`pwd`/"$ac_dir";; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_builddir=${ac_top_builddir}.;; -*) - case ${ac_top_builddir}. in - .) ac_abs_top_builddir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; - *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_srcdir=$ac_srcdir;; -*) - case $ac_srcdir in - .) ac_abs_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; - *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_srcdir=$ac_top_srcdir;; -*) - case $ac_top_srcdir in - .) ac_abs_top_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; - *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; - esac;; -esac - - cd $ac_dir - # Check for guested configure; otherwise get Cygnus style configure. - if test -f $ac_srcdir/configure.gnu; then - echo - $SHELL $ac_srcdir/configure.gnu --help=recursive - elif test -f $ac_srcdir/configure; then - echo - $SHELL $ac_srcdir/configure --help=recursive - elif test -f $ac_srcdir/configure.ac || - test -f $ac_srcdir/configure.in; then - echo - $ac_configure --help + cd "$ac_dir" || { ac_status=$?; continue; } + # Check for guested configure. + if test -f "$ac_srcdir/configure.gnu"; then + echo && + $SHELL "$ac_srcdir/configure.gnu" --help=recursive + elif test -f "$ac_srcdir/configure"; then + echo && + $SHELL "$ac_srcdir/configure" --help=recursive else - echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 - fi - cd $ac_popdir + $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi || ac_status=$? + cd "$ac_pwd" || { ac_status=$?; break; } done fi -test -n "$ac_init_help" && exit 0 +test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF +configure +generated by GNU Autoconf 2.68 -Copyright (C) 2003 Free Software Foundation, Inc. +Copyright (C) 2010 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. _ACEOF - exit 0 + exit fi -exec 5>config.log -cat >&5 <<_ACEOF + +## ------------------------ ## +## Autoconf initialization. ## +## ------------------------ ## + +# ac_fn_c_try_compile LINENO +# -------------------------- +# Try to compile conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext + if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_compile + +# ac_fn_cxx_try_compile LINENO +# ---------------------------- +# Try to compile conftest.$ac_ext, and return whether this succeeded. +ac_fn_cxx_try_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext + if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_cxx_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_cxx_try_compile + +# ac_fn_c_try_link LINENO +# ----------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_link () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext conftest$ac_exeext + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information + # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would + # interfere with the next link command; also delete a directory that is + # left behind by Apple's compiler. We do this before executing the actions. + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_link + +# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES +# ------------------------------------------------------- +# Tests whether HEADER exists and can be compiled using the include files in +# INCLUDES, setting the cache variable VAR accordingly. +ac_fn_c_check_header_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +#include <$2> +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_header_compile + +# ac_fn_c_try_cpp LINENO +# ---------------------- +# Try to preprocess conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_cpp () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } > conftest.i && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_cpp + +# ac_fn_c_try_run LINENO +# ---------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes +# that executables *can* be run. +ac_fn_c_try_run () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then : + ac_retval=0 +else + $as_echo "$as_me: program exited with status $ac_status" >&5 + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=$ac_status +fi + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_run + +# ac_fn_c_check_func LINENO FUNC VAR +# ---------------------------------- +# Tests whether FUNC exists, setting the cache variable VAR accordingly +ac_fn_c_check_func () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +/* Define $2 to an innocuous variant, in case declares $2. + For example, HP-UX 11i declares gettimeofday. */ +#define $2 innocuous_$2 + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $2 (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef $2 + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char $2 (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_$2 || defined __stub___$2 +choke me +#endif + +int +main () +{ +return $2 (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_func + +# ac_fn_cxx_try_cpp LINENO +# ------------------------ +# Try to preprocess conftest.$ac_ext, and return whether this succeeded. +ac_fn_cxx_try_cpp () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } > conftest.i && { + test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || + test ! -s conftest.err + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_cxx_try_cpp + +# ac_fn_cxx_try_link LINENO +# ------------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. +ac_fn_cxx_try_link () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext conftest$ac_exeext + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_cxx_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information + # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would + # interfere with the next link command; also delete a directory that is + # left behind by Apple's compiler. We do this before executing the actions. + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_cxx_try_link + +# ac_fn_cxx_try_run LINENO +# ------------------------ +# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes +# that executables *can* be run. +ac_fn_cxx_try_run () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then : + ac_retval=0 +else + $as_echo "$as_me: program exited with status $ac_status" >&5 + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=$ac_status +fi + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_cxx_try_run + +# ac_fn_cxx_check_type LINENO TYPE VAR INCLUDES +# --------------------------------------------- +# Tests whether TYPE exists after having included INCLUDES, setting cache +# variable VAR accordingly. +ac_fn_cxx_check_type () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + eval "$3=no" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +if (sizeof ($2)) + return 0; + ; + return 0; +} +_ACEOF +if ac_fn_cxx_try_compile "$LINENO"; then : + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +if (sizeof (($2))) + return 0; + ; + return 0; +} +_ACEOF +if ac_fn_cxx_try_compile "$LINENO"; then : + +else + eval "$3=yes" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_cxx_check_type + +# ac_fn_cxx_check_header_mongrel LINENO HEADER VAR INCLUDES +# --------------------------------------------------------- +# Tests whether HEADER exists, giving a warning if it cannot be compiled using +# the include files in INCLUDES and setting the cache variable VAR +# accordingly. +ac_fn_cxx_check_header_mongrel () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if eval \${$3+:} false; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +else + # Is the header compilable? +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 +$as_echo_n "checking $2 usability... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +#include <$2> +_ACEOF +if ac_fn_cxx_try_compile "$LINENO"; then : + ac_header_compiler=yes +else + ac_header_compiler=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 +$as_echo "$ac_header_compiler" >&6; } + +# Is the header present? +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 +$as_echo_n "checking $2 presence... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include <$2> +_ACEOF +if ac_fn_cxx_try_cpp "$LINENO"; then : + ac_header_preproc=yes +else + ac_header_preproc=no +fi +rm -f conftest.err conftest.i conftest.$ac_ext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 +$as_echo "$ac_header_preproc" >&6; } + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_cxx_preproc_warn_flag in #(( + yes:no: ) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 +$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 +$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} + ;; + no:yes:* ) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 +$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 +$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 +$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 +$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 +$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} + ;; +esac + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + eval "$3=\$ac_header_compiler" +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_cxx_check_header_mongrel +cat >config.log <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by $as_me, which was -generated by GNU Autoconf 2.59. Invocation command line was +generated by GNU Autoconf 2.68. Invocation command line was $ $0 $@ _ACEOF +exec 5>>config.log { cat <<_ASUNAME ## --------- ## @@ -1190,7 +2080,7 @@ uname -v = `(uname -v) 2>/dev/null || ec /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` -hostinfo = `(hostinfo) 2>/dev/null || echo unknown` +/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` @@ -1202,8 +2092,9 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - echo "PATH: $as_dir" -done + $as_echo "PATH: $as_dir" + done +IFS=$as_save_IFS } >&5 @@ -1225,7 +2116,6 @@ _ACEOF ac_configure_args= ac_configure_args0= ac_configure_args1= -ac_sep= ac_must_keep_next=false for ac_pass in 1 2 do @@ -1236,13 +2126,13 @@ do -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) continue ;; - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) - ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + *\'*) + ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac case $ac_pass in - 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; + 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; 2) - ac_configure_args1="$ac_configure_args1 '$ac_arg'" + as_fn_append ac_configure_args1 " '$ac_arg'" if test $ac_must_keep_next = true; then ac_must_keep_next=false # Got value, back to normal. else @@ -1258,104 +2148,115 @@ do -* ) ac_must_keep_next=true ;; esac fi - ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" - # Get rid of the leading space. - ac_sep=" " + as_fn_append ac_configure_args " '$ac_arg'" ;; esac done done -$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } -$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } +{ ac_configure_args0=; unset ac_configure_args0;} +{ ac_configure_args1=; unset ac_configure_args1;} # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there # would cause problems or look ugly. -# WARNING: Be sure not to use single quotes in there, as some shells, -# such as our DU 5.0 friend, will then `close' the trap. +# WARNING: Use '\'' to represent an apostrophe within the trap. +# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. trap 'exit_status=$? # Save into config.log some information that might help in debugging. { echo - cat <<\_ASBOX -## ---------------- ## + $as_echo "## ---------------- ## ## Cache variables. ## -## ---------------- ## -_ASBOX +## ---------------- ##" echo # The following way of writing the cache mishandles newlines in values, -{ +( + for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done (set) 2>&1 | - case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in - *ac_space=\ *) + case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( + *${as_nl}ac_space=\ *) sed -n \ - "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" - ;; + "s/'\''/'\''\\\\'\'''\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" + ;; #( *) - sed -n \ - "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; - esac; -} + esac | + sort +) echo - cat <<\_ASBOX -## ----------------- ## + $as_echo "## ----------------- ## ## Output variables. ## -## ----------------- ## -_ASBOX +## ----------------- ##" echo for ac_var in $ac_subst_vars do - eval ac_val=$`echo $ac_var` - echo "$ac_var='"'"'$ac_val'"'"'" + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" done | sort echo if test -n "$ac_subst_files"; then - cat <<\_ASBOX -## ------------- ## -## Output files. ## -## ------------- ## -_ASBOX + $as_echo "## ------------------- ## +## File substitutions. ## +## ------------------- ##" echo for ac_var in $ac_subst_files do - eval ac_val=$`echo $ac_var` - echo "$ac_var='"'"'$ac_val'"'"'" + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" done | sort echo fi if test -s confdefs.h; then - cat <<\_ASBOX -## ----------- ## + $as_echo "## ----------- ## ## confdefs.h. ## -## ----------- ## -_ASBOX +## ----------- ##" echo - sed "/^$/d" confdefs.h | sort + cat confdefs.h echo fi test "$ac_signal" != 0 && - echo "$as_me: caught signal $ac_signal" - echo "$as_me: exit $exit_status" + $as_echo "$as_me: caught signal $ac_signal" + $as_echo "$as_me: exit $exit_status" } >&5 - rm -f core *.core && - rm -rf conftest* confdefs* conf$$* $ac_clean_files && + rm -f core *.core core.conftest.* && + rm -f -r conftest* confdefs* conf$$* $ac_clean_files && exit $exit_status - ' 0 +' 0 for ac_signal in 1 2 13 15; do - trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal + trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal done ac_signal=0 # confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -rf conftest* confdefs.h -# AIX cpp loses on an empty file, so make sure it contains at least a newline. -echo >confdefs.h +rm -f -r conftest* confdefs.h + +$as_echo "/* confdefs.h */" > confdefs.h # Predefined preprocessor variables. @@ -1363,112 +2264,137 @@ cat >>confdefs.h <<_ACEOF #define PACKAGE_NAME "$PACKAGE_NAME" _ACEOF - cat >>confdefs.h <<_ACEOF #define PACKAGE_TARNAME "$PACKAGE_TARNAME" _ACEOF - cat >>confdefs.h <<_ACEOF #define PACKAGE_VERSION "$PACKAGE_VERSION" _ACEOF - cat >>confdefs.h <<_ACEOF #define PACKAGE_STRING "$PACKAGE_STRING" _ACEOF - cat >>confdefs.h <<_ACEOF #define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" _ACEOF +cat >>confdefs.h <<_ACEOF +#define PACKAGE_URL "$PACKAGE_URL" +_ACEOF + # Let the site file select an alternate cache file if it wants to. -# Prefer explicitly selected file to automatically selected ones. -if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" - else - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" - fi +# Prefer an explicitly selected file to automatically selected ones. +ac_site_file1=NONE +ac_site_file2=NONE +if test -n "$CONFIG_SITE"; then + # We do not want a PATH search for config.site. + case $CONFIG_SITE in #(( + -*) ac_site_file1=./$CONFIG_SITE;; + */*) ac_site_file1=$CONFIG_SITE;; + *) ac_site_file1=./$CONFIG_SITE;; + esac +elif test "x$prefix" != xNONE; then + ac_site_file1=$prefix/share/config.site + ac_site_file2=$prefix/etc/config.site +else + ac_site_file1=$ac_default_prefix/share/config.site + ac_site_file2=$ac_default_prefix/etc/config.site fi -for ac_site_file in $CONFIG_SITE; do - if test -r "$ac_site_file"; then - { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 -echo "$as_me: loading site script $ac_site_file" >&6;} +for ac_site_file in "$ac_site_file1" "$ac_site_file2" +do + test "x$ac_site_file" = xNONE && continue + if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 +$as_echo "$as_me: loading site script $ac_site_file" >&6;} sed 's/^/| /' "$ac_site_file" >&5 - . "$ac_site_file" + . "$ac_site_file" \ + || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "failed to load site script $ac_site_file +See \`config.log' for more details" "$LINENO" 5; } fi done if test -r "$cache_file"; then - # Some versions of bash will fail to source /dev/null (special - # files actually), so we avoid doing that. - if test -f "$cache_file"; then - { echo "$as_me:$LINENO: loading cache $cache_file" >&5 -echo "$as_me: loading cache $cache_file" >&6;} + # Some versions of bash will fail to source /dev/null (special files + # actually), so we avoid doing that. DJGPP emulates it as a regular file. + if test /dev/null != "$cache_file" && test -f "$cache_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 +$as_echo "$as_me: loading cache $cache_file" >&6;} case $cache_file in - [\\/]* | ?:[\\/]* ) . $cache_file;; - *) . ./$cache_file;; + [\\/]* | ?:[\\/]* ) . "$cache_file";; + *) . "./$cache_file";; esac fi else - { echo "$as_me:$LINENO: creating cache $cache_file" >&5 -echo "$as_me: creating cache $cache_file" >&6;} + { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 +$as_echo "$as_me: creating cache $cache_file" >&6;} >$cache_file fi # Check that the precious variables saved in the cache have kept the same # value. ac_cache_corrupted=false -for ac_var in `(set) 2>&1 | - sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do +for ac_var in $ac_precious_vars; do eval ac_old_set=\$ac_cv_env_${ac_var}_set eval ac_new_set=\$ac_env_${ac_var}_set - eval ac_old_val="\$ac_cv_env_${ac_var}_value" - eval ac_new_val="\$ac_env_${ac_var}_value" + eval ac_old_val=\$ac_cv_env_${ac_var}_value + eval ac_new_val=\$ac_env_${ac_var}_value case $ac_old_set,$ac_new_set in set,) - { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 -echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ac_cache_corrupted=: ;; ,set) - { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 -echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ac_cache_corrupted=: ;; ,);; *) if test "x$ac_old_val" != "x$ac_new_val"; then - { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 -echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} - { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 -echo "$as_me: former value: $ac_old_val" >&2;} - { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 -echo "$as_me: current value: $ac_new_val" >&2;} - ac_cache_corrupted=: + # differences in whitespace do not lead to failure. + ac_old_val_w=`echo x $ac_old_val` + ac_new_val_w=`echo x $ac_new_val` + if test "$ac_old_val_w" != "$ac_new_val_w"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 +$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + ac_cache_corrupted=: + else + { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 +$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} + eval $ac_var=\$ac_old_val + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 +$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 +$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} fi;; esac # Pass precious variables to config.status. if test "$ac_new_set" = set; then case $ac_new_val in - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) - ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; *) ac_arg=$ac_var=$ac_new_val ;; esac case " $ac_configure_args " in *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. - *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; + *) as_fn_append ac_configure_args " '$ac_arg'" ;; esac fi done if $ac_cache_corrupted; then - { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 -echo "$as_me: error: changes in the environment can compromise the build" >&2;} - { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 -echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} - { (exit 1); exit 1; }; } -fi + { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 +$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} + as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 +fi +## -------------------- ## +## Main body of script. ## +## -------------------- ## ac_ext=c ac_cpp='$CPP $CPPFLAGS' @@ -1479,23 +2405,6 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - - - - - - - - - - - - - - - GENERIC_LIBRARY_NAME=libcoyotl #release versioning @@ -1531,31 +2440,36 @@ GENERIC_RELEASE=$GENERIC_MAJOR_VERSION.$ VERSION=$GENERIC_VERSION -am__api_version="1.9" +am__api_version='1.11' + ac_aux_dir= -for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do - if test -f $ac_dir/install-sh; then +for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do + if test -f "$ac_dir/install-sh"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install-sh -c" break - elif test -f $ac_dir/install.sh; then + elif test -f "$ac_dir/install.sh"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install.sh -c" break - elif test -f $ac_dir/shtool; then + elif test -f "$ac_dir/shtool"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/shtool install -c" break fi done if test -z "$ac_aux_dir"; then - { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5 -echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;} - { (exit 1); exit 1; }; } -fi -ac_config_guess="$SHELL $ac_aux_dir/config.guess" -ac_config_sub="$SHELL $ac_aux_dir/config.sub" -ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. + as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 +fi + +# These three variables are undocumented and unsupported, +# and are intended to be withdrawn in a future Autoconf release. +# They can cause serious problems if a builder's source tree is in a directory +# whose full name contains unusual characters. +ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. +ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. +ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. + # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or @@ -1570,22 +2484,23 @@ ac_configure="$SHELL $ac_aux_dir/configu # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. -echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 -echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 +# Reject install programs that cannot install multiple files. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 +$as_echo_n "checking for a BSD-compatible install... " >&6; } if test -z "$INSTALL"; then -if test "${ac_cv_path_install+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +if ${ac_cv_path_install+:} false; then : + $as_echo_n "(cached) " >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - # Account for people who put trailing slashes in PATH elements. -case $as_dir/ in - ./ | .// | /cC/* | \ + # Account for people who put trailing slashes in PATH elements. +case $as_dir/ in #(( + ./ | .// | /[cC]/* | \ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ - ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ + ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ /usr/ucb/* ) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. @@ -1593,7 +2508,7 @@ case $as_dir/ in # by default. for ac_prog in ginstall scoinst install; do for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then + if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then if test $ac_prog = install && grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. @@ -1603,30 +2518,43 @@ case $as_dir/ in # program-specific install script used by HP pwplus--don't use. : else - ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" - break 3 + rm -rf conftest.one conftest.two conftest.dir + echo one > conftest.one + echo two > conftest.two + mkdir conftest.dir + if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && + test -s conftest.one && test -s conftest.two && + test -s conftest.dir/conftest.one && + test -s conftest.dir/conftest.two + then + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi fi fi done done ;; esac -done + done +IFS=$as_save_IFS + +rm -rf conftest.one conftest.two conftest.dir fi if test "${ac_cv_path_install+set}" = set; then INSTALL=$ac_cv_path_install else - # As a last resort, use the slow shell script. We don't cache a - # path for INSTALL within a source directory, because that will + # As a last resort, use the slow shell script. Don't cache a + # value for INSTALL within a source directory, because that will # break other packages using the cache if that directory is - # removed, or if the path is relative. + # removed, or if the value is a relative name. INSTALL=$ac_install_sh fi fi -echo "$as_me:$LINENO: result: $INSTALL" >&5 -echo "${ECHO_T}$INSTALL" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 +$as_echo "$INSTALL" >&6; } # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. @@ -1636,21 +2564,34 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCR test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' -echo "$as_me:$LINENO: checking whether build environment is sane" >&5 -echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 +$as_echo_n "checking whether build environment is sane... " >&6; } # Just in case sleep 1 echo timestamp > conftest.file +# Reject unsafe characters in $srcdir or the absolute working directory +# name. Accept space and tab only in the latter. +am_lf=' +' +case `pwd` in + *[\\\"\#\$\&\'\`$am_lf]*) + as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; +esac +case $srcdir in + *[\\\"\#\$\&\'\`$am_lf\ \ ]*) + as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;; +esac + # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( - set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` if test "$*" = "X"; then # -L didn't work. - set X `ls -t $srcdir/configure conftest.file` + set X `ls -t "$srcdir/configure" conftest.file` fi rm -f conftest.file if test "$*" != "X $srcdir/configure conftest.file" \ @@ -1660,11 +2601,8 @@ if ( # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". - { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken -alias in your environment" >&5 -echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken -alias in your environment" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "ls -t appears to fail. Make sure there is not a broken +alias in your environment" "$LINENO" 5 fi test "$2" = conftest.file @@ -1673,81 +2611,206 @@ then # Ok. : else - { { echo "$as_me:$LINENO: error: newly created file is older than distributed files! -Check your system clock" >&5 -echo "$as_me: error: newly created file is older than distributed files! -Check your system clock" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "newly created file is older than distributed files! +Check your system clock" "$LINENO" 5 fi -echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } test "$program_prefix" != NONE && - program_transform_name="s,^,$program_prefix,;$program_transform_name" + program_transform_name="s&^&$program_prefix&;$program_transform_name" # Use a double $ so make ignores it. test "$program_suffix" != NONE && - program_transform_name="s,\$,$program_suffix,;$program_transform_name" -# Double any \ or $. echo might interpret backslashes. + program_transform_name="s&\$&$program_suffix&;$program_transform_name" +# Double any \ or $. # By default was `s,x,x', remove it if useless. -cat <<\_ACEOF >conftest.sed -s/[\\$]/&&/g;s/;s,x,x,$// -_ACEOF -program_transform_name=`echo $program_transform_name | sed -f conftest.sed` -rm conftest.sed +ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' +program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` # expand $ac_aux_dir to an absolute path am_aux_dir=`cd $ac_aux_dir && pwd` -test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" +if test x"${MISSING+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; + *) + MISSING="\${SHELL} $am_aux_dir/missing" ;; + esac +fi # Use eval to expand $SHELL if eval "$MISSING --run true"; then am_missing_run="$MISSING --run " else am_missing_run= - { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 -echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5 +$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} fi -if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then - # We used to keeping the `.' as first argument, in order to - # allow $(mkdir_p) to be used without argument. As in - # $(mkdir_p) $(somedir) - # where $(somedir) is conditionally defined. However this is wrong - # for two reasons: - # 1. if the package is installed by a user who cannot write `.' - # make install will fail, - # 2. the above comment should most certainly read - # $(mkdir_p) $(DESTDIR)$(somedir) - # so it does not work when $(somedir) is undefined and - # $(DESTDIR) is not. - # To support the latter case, we have to write - # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), - # so the `.' trick is pointless. - mkdir_p='mkdir -p --' -else - # On NextStep and OpenStep, the `mkdir' command does not - # recognize any option. It will interpret all options as - # directories to create, and then abort because `.' already - # exists. - for d in ./-p ./--version; - do - test -d $d && rmdir $d - done - # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. - if test -f "$ac_aux_dir/mkinstalldirs"; then - mkdir_p='$(mkinstalldirs)' +if test x"${install_sh}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; + *) + install_sh="\${SHELL} $am_aux_dir/install-sh" + esac +fi + +# Installed binaries are usually stripped using `strip' when the user +# run `make install-strip'. However `strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the `STRIP' environment variable to overrule this program. +if test "$cross_compiling" != no; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 +$as_echo "$STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_STRIP="strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 +$as_echo "$ac_ct_STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_STRIP" = x; then + STRIP=":" else - mkdir_p='$(install_sh) -d' + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + STRIP=$ac_ct_STRIP + fi +else + STRIP="$ac_cv_prog_STRIP" +fi + +fi +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 +$as_echo_n "checking for a thread-safe mkdir -p... " >&6; } +if test -z "$MKDIR_P"; then + if ${ac_cv_path_mkdir+:} false; then : + $as_echo_n "(cached) " >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in mkdir gmkdir; do + for ac_exec_ext in '' $ac_executable_extensions; do + { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue + case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( + 'mkdir (GNU coreutils) '* | \ + 'mkdir (coreutils) '* | \ + 'mkdir (fileutils) '4.1*) + ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext + break 3;; + esac + done + done + done +IFS=$as_save_IFS + +fi + + test -d ./--version && rmdir ./--version + if test "${ac_cv_path_mkdir+set}" = set; then + MKDIR_P="$ac_cv_path_mkdir -p" + else + # As a last resort, use the slow shell script. Don't cache a + # value for MKDIR_P within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + MKDIR_P="$ac_install_sh -d" fi fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 +$as_echo "$MKDIR_P" >&6; } + +mkdir_p="$MKDIR_P" +case $mkdir_p in + [\\/$]* | ?:[\\/]*) ;; + */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; +esac for ac_prog in gawk mawk nawk awk do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_AWK+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AWK+:} false; then : + $as_echo_n "(cached) " >&6 else if test -n "$AWK"; then ac_cv_prog_AWK="$AWK" # Let the user override the test. @@ -1757,55 +2820,59 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_AWK="$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done +IFS=$as_save_IFS fi fi AWK=$ac_cv_prog_AWK if test -n "$AWK"; then - echo "$as_me:$LINENO: result: $AWK" >&5 -echo "${ECHO_T}$AWK" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 +$as_echo "$AWK" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi + test -n "$AWK" && break done -echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 -echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6 -set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'` -if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } +set x ${MAKE-make} +ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` +if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : + $as_echo_n "(cached) " >&6 else cat >conftest.make <<\_ACEOF +SHELL = /bin/sh all: - @echo 'ac_maketemp="$(MAKE)"' + @echo '@@@%%%=$(MAKE)=@@@%%%' _ACEOF -# GNU make sometimes prints "make[1]: Entering...", which would confuse us. -eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` -if test -n "$ac_maketemp"; then - eval ac_cv_prog_make_${ac_make}_set=yes -else - eval ac_cv_prog_make_${ac_make}_set=no -fi +# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. +case `${MAKE-make} -f conftest.make 2>/dev/null` in + *@@@%%%=?*=@@@%%%*) + eval ac_cv_prog_make_${ac_make}_set=yes;; + *) + eval ac_cv_prog_make_${ac_make}_set=no;; +esac rm -f conftest.make fi -if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 +if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } SET_MAKE= else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } SET_MAKE="MAKE=${MAKE-make}" fi @@ -1818,12 +2885,14 @@ else fi rmdir .tst 2>/dev/null -# test to see if srcdir already configured -if test "`cd $srcdir && pwd`" != "`pwd`" && - test -f $srcdir/config.status; then - { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 -echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} - { (exit 1); exit 1; }; } +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + am__isrc=' -I$(srcdir)' + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 + fi fi # test whether we have cygpath @@ -1857,96 +2926,6 @@ AUTOHEADER=${AUTOHEADER-"${am_missing_ru MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} -install_sh=${install_sh-"$am_aux_dir/install-sh"} - -# Installed binaries are usually stripped using `strip' when the user -# run `make install-strip'. However `strip' might not be the right -# tool to use in cross-compilation environments, therefore Automake -# will honor the `STRIP' environment variable to overrule this program. -if test "$cross_compiling" != no; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -set dummy ${ac_tool_prefix}strip; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_STRIP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$STRIP"; then - ac_cv_prog_STRIP="$STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -STRIP=$ac_cv_prog_STRIP -if test -n "$STRIP"; then - echo "$as_me:$LINENO: result: $STRIP" >&5 -echo "${ECHO_T}$STRIP" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -fi -if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_STRIP"; then - ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_STRIP="strip" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - - test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" -fi -fi -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -if test -n "$ac_ct_STRIP"; then - echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 -echo "${ECHO_T}$ac_ct_STRIP" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - STRIP=$ac_ct_STRIP -else - STRIP="$ac_cv_prog_STRIP" -fi - -fi -INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" - # We need awk for the "check" target. The system "awk" is bad on # some platforms. # Always define AMTAR for backward compatibility. @@ -1969,10 +2948,10 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. @@ -1982,35 +2961,37 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="${ac_tool_prefix}gcc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done +IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi + fi if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. @@ -2020,39 +3001,50 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CC="gcc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done +IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then - echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi - CC=$ac_ct_CC + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi else CC="$ac_cv_prog_CC" fi if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. @@ -2062,77 +3054,37 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="${ac_tool_prefix}cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done +IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi - CC=$ac_ct_CC -else - CC="$ac_cv_prog_CC" -fi + fi fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. @@ -2143,18 +3095,19 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done +IFS=$as_save_IFS if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. @@ -2172,24 +3125,25 @@ fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi + fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then - for ac_prog in cl + for ac_prog in cl.exe do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. @@ -2199,39 +3153,41 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done +IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi + test -n "$CC" && break done fi if test -z "$CC"; then ac_ct_CC=$CC - for ac_prog in cl + for ac_prog in cl.exe do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. @@ -2241,66 +3197,78 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CC="$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done +IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then - echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi + test -n "$ac_ct_CC" && break done - CC=$ac_ct_CC + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi fi fi -test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH -See \`config.log' for more details." >&5 -echo "$as_me: error: no acceptable C compiler found in \$PATH -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } +test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "no acceptable C compiler found in \$PATH +See \`config.log' for more details" "$LINENO" 5; } # Provide some information about the compiler. -echo "$as_me:$LINENO:" \ - "checking for C compiler version" >&5 -ac_compiler=`set X $ac_compile; echo $2` -{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 - (eval $ac_compiler --version &5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 - (eval $ac_compiler -v &5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 - (eval $ac_compiler -V &5) 2>&5 +$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 +set X $ac_compile +ac_compiler=$2 +for ac_option in --version -v -V -qversion; do + { { ac_try="$ac_compiler $ac_option >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compiler $ac_option >&5") 2>conftest.err ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } + if test -s conftest.err; then + sed '10a\ +... rest of stderr output deleted ... + 10q' conftest.err >conftest.er1 + cat conftest.er1 >&5 + fi + rm -f conftest.er1 conftest.err + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } +done -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -2312,112 +3280,108 @@ main () } _ACEOF ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files a.out a.exe b.out" +ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" # Try to create an executable without -o first, disregard a.out. # It will help us diagnose broken compilers, and finding out an intuition # of exeext. -echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 -echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6 -ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` -if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 - (eval $ac_link_default) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - # Find the output, starting from the most likely. This scheme is -# not robust to junk in `.', hence go to wildcards (a.*) only as a last -# resort. - -# Be careful to initialize this variable, since it used to be cached. -# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. -ac_cv_exeext= -# b.out is created by i960 compilers. -for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 +$as_echo_n "checking whether the C compiler works... " >&6; } +ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` + +# The possible output files: +ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" + +ac_rmfiles= +for ac_file in $ac_files +do + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + * ) ac_rmfiles="$ac_rmfiles $ac_file";; + esac +done +rm -f $ac_rmfiles + +if { { ac_try="$ac_link_default" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link_default") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. +# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' +# in a Makefile. We should not override ac_cv_exeext if it was cached, +# so that the user can short-circuit this test for compilers unknown to +# Autoconf. +for ac_file in $ac_files '' do test -f "$ac_file" || continue case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) - ;; - conftest.$ac_ext ) - # This is the source file. + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; [ab].out ) # We found the default executable, but exeext='' is most # certainly right. break;; *.* ) - ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - # FIXME: I believe we export ac_cv_exeext for Libtool, - # but it would be cool to find out if it's true. Does anybody - # maintain Libtool? --akim. - export ac_cv_exeext + if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; + then :; else + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + fi + # We set ac_cv_exeext here because the later test for it is not + # safe: cross compilers may not add the suffix if given an `-o' + # argument, so we may need to know it at that point already. + # Even if this section looks crufty: it has the advantage of + # actually working. break;; * ) break;; esac done -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +test "$ac_cv_exeext" = no && ac_cv_exeext= -{ { echo "$as_me:$LINENO: error: C compiler cannot create executables -See \`config.log' for more details." >&5 -echo "$as_me: error: C compiler cannot create executables -See \`config.log' for more details." >&2;} - { (exit 77); exit 77; }; } +else + ac_file='' fi +if test -z "$ac_file"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +$as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "C compiler cannot create executables +See \`config.log' for more details" "$LINENO" 5; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 +$as_echo_n "checking for C compiler default output file name... " >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 +$as_echo "$ac_file" >&6; } ac_exeext=$ac_cv_exeext -echo "$as_me:$LINENO: result: $ac_file" >&5 -echo "${ECHO_T}$ac_file" >&6 -# Check the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -echo "$as_me:$LINENO: checking whether the C compiler works" >&5 -echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6 -# FIXME: These cross compiler hacks should be removed for Autoconf 3.0 -# If not cross compiling, check that we can run a simple program. -if test "$cross_compiling" != yes; then - if { ac_try='./$ac_file' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - cross_compiling=no - else - if test "$cross_compiling" = maybe; then - cross_compiling=yes - else - { { echo "$as_me:$LINENO: error: cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } - fi - fi -fi -echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - -rm -f a.out a.exe conftest$ac_cv_exeext b.out +rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out ac_clean_files=$ac_clean_files_save -# Check the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 -echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 -echo "$as_me:$LINENO: result: $cross_compiling" >&5 -echo "${ECHO_T}$cross_compiling" >&6 - -echo "$as_me:$LINENO: checking for suffix of executables" >&5 -echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6 -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 +$as_echo_n "checking for suffix of executables... " >&6; } +if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : # If both `conftest.exe' and `conftest' are `present' (well, observable) # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will # work properly (i.e., refer to `conftest.exe'), while it won't with @@ -2425,38 +3389,90 @@ if { (eval echo "$as_me:$LINENO: \"$ac_l for ac_file in conftest.exe conftest conftest.*; do test -f "$ac_file" || continue case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - export ac_cv_exeext break;; * ) break;; esac done else - { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -fi - -rm -f conftest$ac_cv_exeext -echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 -echo "${ECHO_T}$ac_cv_exeext" >&6 + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details" "$LINENO" 5; } +fi +rm -f conftest conftest$ac_cv_exeext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 +$as_echo "$ac_cv_exeext" >&6; } rm -f conftest.$ac_ext EXEEXT=$ac_cv_exeext ac_exeext=$EXEEXT -echo "$as_me:$LINENO: checking for suffix of object files" >&5 -echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 -if test "${ac_cv_objext+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main () +{ +FILE *f = fopen ("conftest.out", "w"); + return ferror (f) || fclose (f) != 0; + + ; + return 0; +} _ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +ac_clean_files="$ac_clean_files conftest.out" +# Check that the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 +$as_echo_n "checking whether we are cross compiling... " >&6; } +if test "$cross_compiling" != yes; then + { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if { ac_try='./conftest$ac_cv_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details" "$LINENO" 5; } + fi + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 +$as_echo "$cross_compiling" >&6; } + +rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 +$as_echo_n "checking for suffix of object files... " >&6; } +if ${ac_cv_objext+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -2468,45 +3484,46 @@ main () } _ACEOF rm -f conftest.o conftest.obj -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do +if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + for ac_file in conftest.o conftest.obj conftest.*; do + test -f "$ac_file" || continue; case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` break;; esac done else - echo "$as_me: failed program was:" >&5 + $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot compute suffix of object files: cannot compile -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of object files: cannot compile +See \`config.log' for more details" "$LINENO" 5; } fi - rm -f conftest.$ac_cv_objext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 -echo "${ECHO_T}$ac_cv_objext" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 +$as_echo "$ac_cv_objext" >&6; } OBJEXT=$ac_cv_objext ac_objext=$OBJEXT -echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 -echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 -if test "${ac_cv_c_compiler_gnu+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 +$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } +if ${ac_cv_c_compiler_gnu+:} false; then : + $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -2520,55 +3537,34 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_compile "$LINENO"; then : ac_compiler_gnu=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_compiler_gnu=no + ac_compiler_gnu=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi -echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 -echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 -GCC=`test $ac_compiler_gnu = yes && echo yes` +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 +$as_echo "$ac_cv_c_compiler_gnu" >&6; } +if test $ac_compiler_gnu = yes; then + GCC=yes +else + GCC= +fi ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS -CFLAGS="-g" -echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 -echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 -if test "${ac_cv_prog_cc_g+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 +$as_echo_n "checking whether $CC accepts -g... " >&6; } +if ${ac_cv_prog_cc_g+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_save_c_werror_flag=$ac_c_werror_flag + ac_c_werror_flag=yes + ac_cv_prog_cc_g=no + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -2579,39 +3575,49 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + CFLAGS="" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + +else + ac_c_werror_flag=$ac_save_c_werror_flag + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ -ac_cv_prog_cc_g=no + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 -echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_c_werror_flag=$ac_save_c_werror_flag +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 +$as_echo "$ac_cv_prog_cc_g" >&6; } if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then @@ -2627,18 +3633,14 @@ else CFLAGS= fi fi -echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 -echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 -if test "${ac_cv_prog_cc_stdc+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 +$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } +if ${ac_cv_prog_cc_c89+:} false; then : + $as_echo_n "(cached) " >&6 else - ac_cv_prog_cc_stdc=no + ac_cv_prog_cc_c89=no ac_save_CC=$CC -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include @@ -2666,12 +3668,17 @@ static char *f (char * (*g) (char **, in /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has function prototypes and stuff, but not '\xHH' hex character constants. These don't provoke an error unfortunately, instead are silently treated - as 'x'. The following induces an error, until -std1 is added to get + as 'x'. The following induces an error, until -std is added to get proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an array size at least. It's necessary to write '\x00'==0 to get something - that's true only with -std1. */ + that's true only with -std. */ int osf4_cc_array ['\x00' == 0 ? 1 : -1]; +/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters + inside strings and character constants. */ +#define FOO(x) 'x' +int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; + int test (int i, double x); struct s1 {int (*f) (int a);}; struct s2 {int (*f) (double a);}; @@ -2686,205 +3693,37 @@ return f (e, argv, 0) != argv[0] || f return 0; } _ACEOF -# Don't try gcc -ansi; that turns off useful extensions and -# breaks some systems' header files. -# AIX -qlanglvl=ansi -# Ultrix and OSF/1 -std1 -# HP-UX 10.20 and later -Ae -# HP-UX older versions -Aa -D_HPUX_SOURCE -# SVR4 -Xc -D__EXTENSIONS__ -for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ + -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" - rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_prog_cc_stdc=$ac_arg -break -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - + if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_c89=$ac_arg fi -rm -f conftest.err conftest.$ac_objext +rm -f core conftest.err conftest.$ac_objext + test "x$ac_cv_prog_cc_c89" != "xno" && break done -rm -f conftest.$ac_ext conftest.$ac_objext +rm -f conftest.$ac_ext CC=$ac_save_CC fi - -case "x$ac_cv_prog_cc_stdc" in - x|xno) - echo "$as_me:$LINENO: result: none needed" >&5 -echo "${ECHO_T}none needed" >&6 ;; +# AC_CACHE_VAL +case "x$ac_cv_prog_cc_c89" in + x) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 +$as_echo "none needed" >&6; } ;; + xno) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 +$as_echo "unsupported" >&6; } ;; *) - echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 -echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 - CC="$CC $ac_cv_prog_cc_stdc" ;; + CC="$CC $ac_cv_prog_cc_c89" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 +$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; esac +if test "x$ac_cv_prog_cc_c89" != xno; then : -# Some people use a C++ compiler to compile C. Since we use `exit', -# in C++ we need to declare it. In case someone uses the same compiler -# for both compiling C and C++ we need to have the C++ compiler decide -# the declaration of exit, since it's the most demanding environment. -cat >conftest.$ac_ext <<_ACEOF -#ifndef __cplusplus - choke me -#endif -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - for ac_declaration in \ - '' \ - 'extern "C" void std::exit (int) throw (); using std::exit;' \ - 'extern "C" void std::exit (int); using std::exit;' \ - 'extern "C" void exit (int) throw ();' \ - 'extern "C" void exit (int);' \ - 'void exit (int);' -do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_declaration -#include -int -main () -{ -exit (42); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -continue -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_declaration -int -main () -{ -exit (42); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - break -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -done -rm -f conftest* -if test -n "$ac_declaration"; then - echo '#ifdef __cplusplus' >>confdefs.h - echo $ac_declaration >>confdefs.h - echo '#endif' >>confdefs.h fi -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' @@ -2892,60 +3731,58 @@ ac_link='$CC -o conftest$ac_exeext $CFLA ac_compiler_gnu=$ac_cv_c_compiler_gnu DEPDIR="${am__leading_dot}deps" - ac_config_commands="$ac_config_commands depfiles" +ac_config_commands="$ac_config_commands depfiles" am_make=${MAKE-make} cat > confinc << 'END' am__doit: - @echo done + @echo this is the am__doit target .PHONY: am__doit END # If we don't find an include directive, just comment out the code. -echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 -echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 +$as_echo_n "checking for style of include used by $am_make... " >&6; } am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf -# We grep out `Entering directory' and `Leaving directory' -# messages which can occur if `w' ends up in MAKEFLAGS. -# In particular we don't look at `^make:' because GNU make might -# be invoked under some other name (usually "gmake"), in which -# case it prints its new name instead of `make'. -if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then - am__include=include - am__quote= - _am_result=GNU -fi +# Ignore all kinds of additional output from `make'. +case `$am_make -s -f confmf 2> /dev/null` in #( +*the\ am__doit\ target*) + am__include=include + am__quote= + _am_result=GNU + ;; +esac # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf - if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then - am__include=.include - am__quote="\"" - _am_result=BSD - fi + case `$am_make -s -f confmf 2> /dev/null` in #( + *the\ am__doit\ target*) + am__include=.include + am__quote="\"" + _am_result=BSD + ;; + esac fi -echo "$as_me:$LINENO: result: $_am_result" >&5 -echo "${ECHO_T}$_am_result" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 +$as_echo "$_am_result" >&6; } rm -f confinc confmf -# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given. -if test "${enable_dependency_tracking+set}" = set; then - enableval="$enable_dependency_tracking" +# Check whether --enable-dependency-tracking was given. +if test "${enable_dependency_tracking+set}" = set; then : + enableval=$enable_dependency_tracking; +fi -fi; if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' fi - - -if test "x$enable_dependency_tracking" != xno; then + if test "x$enable_dependency_tracking" != xno; then AMDEP_TRUE= AMDEP_FALSE='#' else @@ -2955,13 +3792,12 @@ fi - depcc="$CC" am_compiler_list= -echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 -echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6 -if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 +$as_echo_n "checking dependency style of $depcc... " >&6; } +if ${am_cv_CC_dependencies_compiler_type+:} false; then : + $as_echo_n "(cached) " >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up @@ -2986,6 +3822,11 @@ else if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` fi + am__universal=false + case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac + for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and @@ -3003,7 +3844,17 @@ else done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested @@ -3013,18 +3864,23 @@ else break fi ;; + msvisualcpp | msvcmsys) + # This compiler won't grok `-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; none) break ;; esac - # We check with `-c' and `-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. if depmode=$depmode \ - source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ + source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message @@ -3048,13 +3904,11 @@ else fi fi -echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 -echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 +$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type - - -if + if test "x$enable_dependency_tracking" != xno \ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then am__fastdepCC_TRUE= @@ -3065,20 +3919,24 @@ else fi -ac_ext=cc +ac_ext=cpp ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu -if test -n "$ac_tool_prefix"; then - for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC +if test -z "$CXX"; then + if test -n "$CCC"; then + CXX=$CCC + else + if test -n "$ac_tool_prefix"; then + for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CXX+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CXX+:} false; then : + $as_echo_n "(cached) " >&6 else if test -n "$CXX"; then ac_cv_prog_CXX="$CXX" # Let the user override the test. @@ -3088,39 +3946,41 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CXX="$ac_tool_prefix$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done +IFS=$as_save_IFS fi fi CXX=$ac_cv_prog_CXX if test -n "$CXX"; then - echo "$as_me:$LINENO: result: $CXX" >&5 -echo "${ECHO_T}$CXX" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXX" >&5 +$as_echo "$CXX" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi + test -n "$CXX" && break done fi if test -z "$CXX"; then ac_ct_CXX=$CXX - for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC + for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CXX+:} false; then : + $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CXX"; then ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test. @@ -3130,64 +3990,77 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CXX="$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done +IFS=$as_save_IFS fi fi ac_ct_CXX=$ac_cv_prog_ac_ct_CXX if test -n "$ac_ct_CXX"; then - echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5 -echo "${ECHO_T}$ac_ct_CXX" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CXX" >&5 +$as_echo "$ac_ct_CXX" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi + test -n "$ac_ct_CXX" && break done -test -n "$ac_ct_CXX" || ac_ct_CXX="g++" - CXX=$ac_ct_CXX + if test "x$ac_ct_CXX" = x; then + CXX="g++" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CXX=$ac_ct_CXX + fi fi - + fi +fi # Provide some information about the compiler. -echo "$as_me:$LINENO:" \ - "checking for C++ compiler version" >&5 -ac_compiler=`set X $ac_compile; echo $2` -{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 - (eval $ac_compiler --version &5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 - (eval $ac_compiler -v &5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 - (eval $ac_compiler -V &5) 2>&5 +$as_echo "$as_me:${as_lineno-$LINENO}: checking for C++ compiler version" >&5 +set X $ac_compile +ac_compiler=$2 +for ac_option in --version -v -V -qversion; do + { { ac_try="$ac_compiler $ac_option >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compiler $ac_option >&5") 2>conftest.err ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } - -echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5 -echo $ECHO_N "checking whether we are using the GNU C++ compiler... $ECHO_C" >&6 -if test "${ac_cv_cxx_compiler_gnu+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + if test -s conftest.err; then + sed '10a\ +... rest of stderr output deleted ... + 10q' conftest.err >conftest.er1 + cat conftest.er1 >&5 + fi + rm -f conftest.er1 conftest.err + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } +done + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C++ compiler" >&5 +$as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; } +if ${ac_cv_cxx_compiler_gnu+:} false; then : + $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -3201,55 +4074,34 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_cxx_try_compile "$LINENO"; then : ac_compiler_gnu=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_compiler_gnu=no + ac_compiler_gnu=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_cxx_compiler_gnu=$ac_compiler_gnu fi -echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5 -echo "${ECHO_T}$ac_cv_cxx_compiler_gnu" >&6 -GXX=`test $ac_compiler_gnu = yes && echo yes` +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_cxx_compiler_gnu" >&5 +$as_echo "$ac_cv_cxx_compiler_gnu" >&6; } +if test $ac_compiler_gnu = yes; then + GXX=yes +else + GXX= +fi ac_test_CXXFLAGS=${CXXFLAGS+set} ac_save_CXXFLAGS=$CXXFLAGS -CXXFLAGS="-g" -echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5 -echo $ECHO_N "checking whether $CXX accepts -g... $ECHO_C" >&6 -if test "${ac_cv_prog_cxx_g+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -g" >&5 +$as_echo_n "checking whether $CXX accepts -g... " >&6; } +if ${ac_cv_prog_cxx_g+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_save_cxx_werror_flag=$ac_cxx_werror_flag + ac_cxx_werror_flag=yes + ac_cv_prog_cxx_g=no + CXXFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -3260,175 +4112,79 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_cxx_try_compile "$LINENO"; then : ac_cv_prog_cxx_g=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_prog_cxx_g=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5 -echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6 -if test "$ac_test_CXXFLAGS" = set; then - CXXFLAGS=$ac_save_CXXFLAGS -elif test $ac_cv_prog_cxx_g = yes; then - if test "$GXX" = yes; then - CXXFLAGS="-g -O2" - else - CXXFLAGS="-g" - fi -else - if test "$GXX" = yes; then - CXXFLAGS="-O2" - else - CXXFLAGS= - fi -fi -for ac_declaration in \ - '' \ - 'extern "C" void std::exit (int) throw (); using std::exit;' \ - 'extern "C" void std::exit (int); using std::exit;' \ - 'extern "C" void exit (int) throw ();' \ - 'extern "C" void exit (int);' \ - 'void exit (int);' -do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + CXXFLAGS="" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -$ac_declaration -#include + int main () { -exit (42); + ; return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +if ac_fn_cxx_try_compile "$LINENO"; then : -continue -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +else + ac_cxx_werror_flag=$ac_save_cxx_werror_flag + CXXFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -$ac_declaration + int main () { -exit (42); + ; return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - break -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - +if ac_fn_cxx_try_compile "$LINENO"; then : + ac_cv_prog_cxx_g=yes fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -done -rm -f conftest* -if test -n "$ac_declaration"; then - echo '#ifdef __cplusplus' >>confdefs.h - echo $ac_declaration >>confdefs.h - echo '#endif' >>confdefs.h +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -depcc="$CXX" am_compiler_list= - -echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 -echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6 -if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_cxx_werror_flag=$ac_save_cxx_werror_flag +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cxx_g" >&5 +$as_echo "$ac_cv_prog_cxx_g" >&6; } +if test "$ac_test_CXXFLAGS" = set; then + CXXFLAGS=$ac_save_CXXFLAGS +elif test $ac_cv_prog_cxx_g = yes; then + if test "$GXX" = yes; then + CXXFLAGS="-g -O2" + else + CXXFLAGS="-g" + fi +else + if test "$GXX" = yes; then + CXXFLAGS="-O2" + else + CXXFLAGS= + fi +fi +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +depcc="$CXX" am_compiler_list= + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 +$as_echo_n "checking dependency style of $depcc... " >&6; } +if ${am_cv_CXX_dependencies_compiler_type+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named `D' -- because `-MD' means `put the output @@ -3450,6 +4206,11 @@ else if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` fi + am__universal=false + case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac + for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and @@ -3467,7 +4228,17 @@ else done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested @@ -3477,18 +4248,23 @@ else break fi ;; + msvisualcpp | msvcmsys) + # This compiler won't grok `-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; none) break ;; esac - # We check with `-c' and `-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. if depmode=$depmode \ - source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ + source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message @@ -3512,13 +4288,11 @@ else fi fi -echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5 -echo "${ECHO_T}$am_cv_CXX_dependencies_compiler_type" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CXX_dependencies_compiler_type" >&5 +$as_echo "$am_cv_CXX_dependencies_compiler_type" >&6; } CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type - - -if + if test "x$enable_dependency_tracking" != xno \ && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then am__fastdepCXX_TRUE= @@ -3529,217 +4303,482 @@ else fi -# Check whether --enable-shared or --disable-shared was given. -if test "${enable_shared+set}" = set; then - enableval="$enable_shared" - p=${PACKAGE-default} - case $enableval in - yes) enable_shared=yes ;; - no) enable_shared=no ;; - *) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac -else - enable_shared=yes -fi; +case `pwd` in + *\ * | *\ *) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 +$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; +esac -# Check whether --enable-static or --disable-static was given. -if test "${enable_static+set}" = set; then - enableval="$enable_static" - p=${PACKAGE-default} - case $enableval in - yes) enable_static=yes ;; - no) enable_static=no ;; - *) - enable_static=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac -else - enable_static=yes -fi; -# Check whether --enable-fast-install or --disable-fast-install was given. -if test "${enable_fast_install+set}" = set; then - enableval="$enable_fast_install" - p=${PACKAGE-default} - case $enableval in - yes) enable_fast_install=yes ;; - no) enable_fast_install=no ;; - *) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_fast_install=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac -else - enable_fast_install=yes -fi; + +macro_version='2.4.2' +macro_revision='1.3337' + + + + + + + + + + + + + +ltmain="$ac_aux_dir/ltmain.sh" # Make sure we can run config.sub. -$ac_config_sub sun4 >/dev/null 2>&1 || - { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5 -echo "$as_me: error: cannot run $ac_config_sub" >&2;} - { (exit 1); exit 1; }; } - -echo "$as_me:$LINENO: checking build system type" >&5 -echo $ECHO_N "checking build system type... $ECHO_C" >&6 -if test "${ac_cv_build+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_cv_build_alias=$build_alias -test -z "$ac_cv_build_alias" && - ac_cv_build_alias=`$ac_config_guess` -test -z "$ac_cv_build_alias" && - { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 -echo "$as_me: error: cannot guess build type; you must specify one" >&2;} - { (exit 1); exit 1; }; } -ac_cv_build=`$ac_config_sub $ac_cv_build_alias` || - { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5 -echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;} - { (exit 1); exit 1; }; } +$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || + as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 -fi -echo "$as_me:$LINENO: result: $ac_cv_build" >&5 -echo "${ECHO_T}$ac_cv_build" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 +$as_echo_n "checking build system type... " >&6; } +if ${ac_cv_build+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_build_alias=$build_alias +test "x$ac_build_alias" = x && + ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` +test "x$ac_build_alias" = x && + as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 +ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 +$as_echo "$ac_cv_build" >&6; } +case $ac_cv_build in +*-*-*) ;; +*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;; +esac build=$ac_cv_build -build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` - - -echo "$as_me:$LINENO: checking host system type" >&5 -echo $ECHO_N "checking host system type... $ECHO_C" >&6 -if test "${ac_cv_host+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_cv_host_alias=$host_alias -test -z "$ac_cv_host_alias" && - ac_cv_host_alias=$ac_cv_build_alias -ac_cv_host=`$ac_config_sub $ac_cv_host_alias` || - { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5 -echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;} - { (exit 1); exit 1; }; } +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_build +shift +build_cpu=$1 +build_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +build_os=$* +IFS=$ac_save_IFS +case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 +$as_echo_n "checking host system type... " >&6; } +if ${ac_cv_host+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test "x$host_alias" = x; then + ac_cv_host=$ac_cv_build +else + ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 +fi fi -echo "$as_me:$LINENO: result: $ac_cv_host" >&5 -echo "${ECHO_T}$ac_cv_host" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 +$as_echo "$ac_cv_host" >&6; } +case $ac_cv_host in +*-*-*) ;; +*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;; +esac host=$ac_cv_host -host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_host +shift +host_cpu=$1 +host_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +host_os=$* +IFS=$ac_save_IFS +case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac + + +# Backslashify metacharacters that are still active within +# double-quoted strings. +sed_quote_subst='s/\(["`$\\]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\(["`\\]\)/\\\1/g' + +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +# Sed substitution to delay expansion of an escaped single quote. +delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' +# Sed substitution to avoid accidental globbing in evaled expressions +no_glob_subst='s/\*/\\\*/g' -echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5 -echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6 -if test "${lt_cv_path_SED+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5 +$as_echo_n "checking how to print strings... " >&6; } +# Test print first, because it will be a builtin if present. +if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ + test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='print -r --' +elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='printf %s\n' else - # Loop through the user's path and test for sed and gsed. -# Then use that list of sed's as ones to test for truncation. -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + # Use this function as a fallback that always works. + func_fallback_echo () + { + eval 'cat <<_LTECHO_EOF +$1 +_LTECHO_EOF' + } + ECHO='func_fallback_echo' +fi + +# func_echo_all arg... +# Invoke $ECHO with all args, space-separated. +func_echo_all () +{ + $ECHO "" +} + +case "$ECHO" in + printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5 +$as_echo "printf" >&6; } ;; + print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5 +$as_echo "print -r" >&6; } ;; + *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5 +$as_echo "cat" >&6; } ;; +esac + + + + + + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 +$as_echo_n "checking for a sed that does not truncate output... " >&6; } +if ${ac_cv_path_SED+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ + for ac_i in 1 2 3 4 5 6 7; do + ac_script="$ac_script$as_nl$ac_script" + done + echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed + { ac_script=; unset ac_script;} + if test -z "$SED"; then + ac_path_SED_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for lt_ac_prog in sed gsed; do + for ac_prog in sed gsed; do for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then - lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" - fi + ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" + { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue +# Check for GNU ac_path_SED and select it if it is found. + # Check for GNU $ac_path_SED +case `"$ac_path_SED" --version 2>&1` in +*GNU*) + ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo '' >> "conftest.nl" + "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_SED_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_SED="$ac_path_SED" + ac_path_SED_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_SED_found && break 3 done done -done -lt_ac_max=0 -lt_ac_count=0 -# Add /usr/xpg4/bin/sed as it is typically found on Solaris -# along with /bin/sed that truncates output. -for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do - test ! -f $lt_ac_sed && continue - cat /dev/null > conftest.in - lt_ac_count=0 - echo $ECHO_N "0123456789$ECHO_C" >conftest.in - # Check for GNU sed and select it if it is found. - if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then - lt_cv_path_SED=$lt_ac_sed - break + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_SED"; then + as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5 fi - while true; do - cat conftest.in conftest.in >conftest.tmp - mv conftest.tmp conftest.in - cp conftest.in conftest.nl - echo >>conftest.nl - $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break - cmp -s conftest.out conftest.nl || break - # 10000 chars as input seems more than enough - test $lt_ac_count -gt 10 && break - lt_ac_count=`expr $lt_ac_count + 1` - if test $lt_ac_count -gt $lt_ac_max; then - lt_ac_max=$lt_ac_count - lt_cv_path_SED=$lt_ac_sed +else + ac_cv_path_SED=$SED +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5 +$as_echo "$ac_cv_path_SED" >&6; } + SED="$ac_cv_path_SED" + rm -f conftest.sed + +test -z "$SED" && SED=sed +Xsed="$SED -e 1s/^X//" + + + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 +$as_echo_n "checking for grep that handles long lines and -e... " >&6; } +if ${ac_cv_path_GREP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$GREP"; then + ac_path_GREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in grep ggrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" + { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue +# Check for GNU ac_path_GREP and select it if it is found. + # Check for GNU $ac_path_GREP +case `"$ac_path_GREP" --version 2>&1` in +*GNU*) + ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'GREP' >> "conftest.nl" + "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_GREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_GREP="$ac_path_GREP" + ac_path_GREP_max=$ac_count fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break done -done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_GREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_GREP"; then + as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_GREP=$GREP +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 +$as_echo "$ac_cv_path_GREP" >&6; } + GREP="$ac_cv_path_GREP" + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 +$as_echo_n "checking for egrep... " >&6; } +if ${ac_cv_path_EGREP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 + then ac_cv_path_EGREP="$GREP -E" + else + if test -z "$EGREP"; then + ac_path_EGREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in egrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" + { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue +# Check for GNU ac_path_EGREP and select it if it is found. + # Check for GNU $ac_path_EGREP +case `"$ac_path_EGREP" --version 2>&1` in +*GNU*) + ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'EGREP' >> "conftest.nl" + "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_EGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_EGREP="$ac_path_EGREP" + ac_path_EGREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_EGREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_EGREP"; then + as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_EGREP=$EGREP +fi + + fi fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 +$as_echo "$ac_cv_path_EGREP" >&6; } + EGREP="$ac_cv_path_EGREP" + -SED=$lt_cv_path_SED -echo "$as_me:$LINENO: result: $SED" >&5 -echo "${ECHO_T}$SED" >&6 - -echo "$as_me:$LINENO: checking for egrep" >&5 -echo $ECHO_N "checking for egrep... $ECHO_C" >&6 -if test "${ac_cv_prog_egrep+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if echo a | (grep -E '(a|b)') >/dev/null 2>&1 - then ac_cv_prog_egrep='grep -E' - else ac_cv_prog_egrep='egrep' +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5 +$as_echo_n "checking for fgrep... " >&6; } +if ${ac_cv_path_FGREP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 + then ac_cv_path_FGREP="$GREP -F" + else + if test -z "$FGREP"; then + ac_path_FGREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in fgrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" + { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue +# Check for GNU ac_path_FGREP and select it if it is found. + # Check for GNU $ac_path_FGREP +case `"$ac_path_FGREP" --version 2>&1` in +*GNU*) + ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'FGREP' >> "conftest.nl" + "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_FGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_FGREP="$ac_path_FGREP" + ac_path_FGREP_max=$ac_count fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_FGREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_FGREP"; then + as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_FGREP=$FGREP +fi + + fi fi -echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5 -echo "${ECHO_T}$ac_cv_prog_egrep" >&6 - EGREP=$ac_cv_prog_egrep +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5 +$as_echo "$ac_cv_path_FGREP" >&6; } + FGREP="$ac_cv_path_FGREP" + + +test -z "$GREP" && GREP=grep + + + + -# Check whether --with-gnu-ld or --without-gnu-ld was given. -if test "${with_gnu_ld+set}" = set; then - withval="$with_gnu_ld" - test "$withval" = no || with_gnu_ld=yes + + + + + + + + + + + + +# Check whether --with-gnu-ld was given. +if test "${with_gnu_ld+set}" = set; then : + withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes else with_gnu_ld=no -fi; +fi + ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. - echo "$as_me:$LINENO: checking for ld used by $CC" >&5 -echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 +$as_echo_n "checking for ld used by $CC... " >&6; } case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw @@ -3752,9 +4791,9 @@ echo $ECHO_N "checking for ld used by $C [\\/]* | ?:[\\/]*) re_direlt='/[^/][^/]*/\.\./' # Canonicalize the pathname of ld - ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` - while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` + ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` + while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do + ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; @@ -3768,14 +4807,14 @@ echo $ECHO_N "checking for ld used by $C ;; esac elif test "$with_gnu_ld" = yes; then - echo "$as_me:$LINENO: checking for GNU ld" >&5 -echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 +$as_echo_n "checking for GNU ld... " >&6; } else - echo "$as_me:$LINENO: checking for non-GNU ld" >&5 -echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 +$as_echo_n "checking for non-GNU ld... " >&6; } fi -if test "${lt_cv_path_LD+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +if ${lt_cv_path_LD+:} false; then : + $as_echo_n "(cached) " >&6 else if test -z "$LD"; then lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR @@ -3805,19 +4844,17 @@ fi LD="$lt_cv_path_LD" if test -n "$LD"; then - echo "$as_me:$LINENO: result: $LD" >&5 -echo "${ECHO_T}$LD" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5 +$as_echo "$LD" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi -test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 -echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} - { (exit 1); exit 1; }; } -echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 -echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6 -if test "${lt_cv_prog_gnu_ld+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 +$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } +if ${lt_cv_prog_gnu_ld+:} false; then : + $as_echo_n "(cached) " >&6 else # I'd rather use --version here, but apparently some GNU lds only accept -v. case `$LD -v 2>&1 &1 &5 -echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5 +$as_echo "$lt_cv_prog_gnu_ld" >&6; } with_gnu_ld=$lt_cv_prog_gnu_ld -echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 -echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6 -if test "${lt_cv_ld_reload_flag+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_cv_ld_reload_flag='-r' -fi -echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 -echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6 -reload_flag=$lt_cv_ld_reload_flag -case $reload_flag in -"" | " "*) ;; -*) reload_flag=" $reload_flag" ;; -esac -reload_cmds='$LD$reload_flag -o $output$reload_objs' -case $host_os in - darwin*) - if test "$GCC" = yes; then - reload_cmds='$CC -nostdlib ${wl}-r -o $output$reload_objs' - else - reload_cmds='$LD$reload_flag -o $output$reload_objs' - fi - ;; -esac -echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5 -echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6 -if test "${lt_cv_path_NM+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5 +$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; } +if ${lt_cv_path_NM+:} false; then : + $as_echo_n "(cached) " >&6 else if test -n "$NM"; then # Let the user override the test. lt_cv_path_NM="$NM" else - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - tmp_nm="$ac_dir/${ac_tool_prefix}nm" - if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - # Tru64's nm complains that /dev/null is an invalid object file - case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in - */dev/null* | *'Invalid file or object type'*) - lt_cv_path_NM="$tmp_nm -B" - break - ;; - *) - case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in - */dev/null*) - lt_cv_path_NM="$tmp_nm -p" + lt_nm_to_check="${ac_tool_prefix}nm" + if test -n "$ac_tool_prefix" && test "$build" = "$host"; then + lt_nm_to_check="$lt_nm_to_check nm" + fi + for lt_tmp_nm in $lt_nm_to_check; do + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + tmp_nm="$ac_dir/$lt_tmp_nm" + if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then + # Check to see if the nm accepts a BSD-compat flag. + # Adding the `sed 1q' prevents false positives on HP-UX, which says: + # nm: unknown option "B" ignored + # Tru64's nm complains that /dev/null is an invalid object file + case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in + */dev/null* | *'Invalid file or object type'*) + lt_cv_path_NM="$tmp_nm -B" break ;; *) - lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags + case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in + */dev/null*) + lt_cv_path_NM="$tmp_nm -p" + break + ;; + *) + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags + ;; + esac ;; esac - esac - fi + fi + done + IFS="$lt_save_ifs" done - IFS="$lt_save_ifs" - test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm + : ${lt_cv_path_NM=no} fi fi -echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5 -echo "${ECHO_T}$lt_cv_path_NM" >&6 -NM="$lt_cv_path_NM" - -echo "$as_me:$LINENO: checking whether ln -s works" >&5 -echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6 -LN_S=$as_ln_s -if test "$LN_S" = "ln -s"; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5 +$as_echo "$lt_cv_path_NM" >&6; } +if test "$lt_cv_path_NM" != "no"; then + NM="$lt_cv_path_NM" else - echo "$as_me:$LINENO: result: no, using $LN_S" >&5 -echo "${ECHO_T}no, using $LN_S" >&6 -fi + # Didn't find any BSD compatible name lister, look for dumpbin. + if test -n "$DUMPBIN"; then : + # Let the user override the test. + else + if test -n "$ac_tool_prefix"; then + for ac_prog in dumpbin "link -dump" + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_DUMPBIN+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$DUMPBIN"; then + ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS -echo "$as_me:$LINENO: checking how to recognise dependent libraries" >&5 -echo $ECHO_N "checking how to recognise dependent libraries... $ECHO_C" >&6 -if test "${lt_cv_deplibs_check_method+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +fi +DUMPBIN=$ac_cv_prog_DUMPBIN +if test -n "$DUMPBIN"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5 +$as_echo "$DUMPBIN" >&6; } else - lt_cv_file_magic_cmd='$MAGIC_CMD' -lt_cv_file_magic_test_file= -lt_cv_deplibs_check_method='unknown' -# Need to set the preceding variable on all platforms that support -# interlibrary dependencies. -# 'none' -- dependencies not supported. -# `unknown' -- same as none, but documents that we really don't know. -# 'pass_all' -- all dependencies passed with no checks. -# 'test_compile' -- check by making test program. -# 'file_magic [[regex]]' -- check by looking for files in library path -# which responds to the $file_magic_cmd with a given extended regex. -# If you have `file' or equivalent on your system and you're not sure -# whether `pass_all' will *always* work, you probably want this one. + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi -case $host_os in -aix4* | aix5*) - lt_cv_deplibs_check_method=pass_all - ;; -beos*) - lt_cv_deplibs_check_method=pass_all - ;; + test -n "$DUMPBIN" && break + done +fi +if test -z "$DUMPBIN"; then + ac_ct_DUMPBIN=$DUMPBIN + for ac_prog in dumpbin "link -dump" +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_DUMPBIN"; then + ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS -bsdi[45]*) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' - lt_cv_file_magic_cmd='/usr/bin/file -L' - lt_cv_file_magic_test_file=/shlib/libc.so - ;; +fi +fi +ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN +if test -n "$ac_ct_DUMPBIN"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5 +$as_echo "$ac_ct_DUMPBIN" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi -cygwin*) - # func_win32_libid is a shell function defined in ltmain.sh - lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' - lt_cv_file_magic_cmd='func_win32_libid' - ;; -mingw* | pw32*) - # Base MSYS/MinGW do not provide the 'file' command needed by - # func_win32_libid shell function, so use a weaker test based on 'objdump'. - lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' - lt_cv_file_magic_cmd='$OBJDUMP -f' - ;; + test -n "$ac_ct_DUMPBIN" && break +done -darwin* | rhapsody*) - lt_cv_deplibs_check_method=pass_all - ;; + if test "x$ac_ct_DUMPBIN" = x; then + DUMPBIN=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DUMPBIN=$ac_ct_DUMPBIN + fi +fi -freebsd* | kfreebsd*-gnu | dragonfly*) - if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then - case $host_cpu in - i*86 ) - # Not sure whether the presence of OpenBSD here was a mistake. - # Let's accept both of them until this is cleared up. - lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in + *COFF*) + DUMPBIN="$DUMPBIN -symbols" + ;; + *) + DUMPBIN=: ;; esac - else - lt_cv_deplibs_check_method=pass_all fi - ;; -gnu*) - lt_cv_deplibs_check_method=pass_all - ;; - -hpux10.20* | hpux11*) - lt_cv_file_magic_cmd=/usr/bin/file - case $host_cpu in - ia64*) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' - lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so - ;; - hppa*64*) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]' - lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl - ;; - *) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' - lt_cv_file_magic_test_file=/usr/lib/libc.sl - ;; - esac - ;; + if test "$DUMPBIN" != ":"; then + NM="$DUMPBIN" + fi +fi +test -z "$NM" && NM=nm -irix5* | irix6* | nonstopux*) - case $LD in - *-32|*"-32 ") libmagic=32-bit;; - *-n32|*"-n32 ") libmagic=N32;; - *-64|*"-64 ") libmagic=64-bit;; - *) libmagic=never-match;; - esac - lt_cv_deplibs_check_method=pass_all - ;; -# This must be Linux ELF. -linux*) - lt_cv_deplibs_check_method=pass_all - ;; -netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' - else - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' - fi - ;; -newos6*) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=/usr/lib/libnls.so - ;; -nto-qnx*) - lt_cv_deplibs_check_method=unknown - ;; -openbsd*) - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' - else - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5 +$as_echo_n "checking the name lister ($NM) interface... " >&6; } +if ${lt_cv_nm_interface+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_nm_interface="BSD nm" + echo "int some_variable = 0;" > conftest.$ac_ext + (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5) + (eval "$ac_compile" 2>conftest.err) + cat conftest.err >&5 + (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5) + (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) + cat conftest.err >&5 + (eval echo "\"\$as_me:$LINENO: output\"" >&5) + cat conftest.out >&5 + if $GREP 'External.*some_variable' conftest.out > /dev/null; then + lt_cv_nm_interface="MS dumpbin" fi - ;; - -osf3* | osf4* | osf5*) - lt_cv_deplibs_check_method=pass_all - ;; + rm -f conftest* +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5 +$as_echo "$lt_cv_nm_interface" >&6; } -sco3.2v5*) - lt_cv_deplibs_check_method=pass_all - ;; +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5 +$as_echo_n "checking whether ln -s works... " >&6; } +LN_S=$as_ln_s +if test "$LN_S" = "ln -s"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5 +$as_echo "no, using $LN_S" >&6; } +fi -solaris*) - lt_cv_deplibs_check_method=pass_all - ;; +# find the maximum length of command line arguments +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5 +$as_echo_n "checking the maximum length of command line arguments... " >&6; } +if ${lt_cv_sys_max_cmd_len+:} false; then : + $as_echo_n "(cached) " >&6 +else + i=0 + teststring="ABCD" -sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - case $host_vendor in - motorola) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + case $build_os in + msdosdjgpp*) + # On DJGPP, this test can blow up pretty badly due to problems in libc + # (any single argument exceeding 2000 bytes causes a buffer overrun + # during glob expansion). Even if it were fixed, the result of this + # check would be larger than it should be. + lt_cv_sys_max_cmd_len=12288; # 12K is about right ;; - ncr) - lt_cv_deplibs_check_method=pass_all + + gnu*) + # Under GNU Hurd, this test is not required because there is + # no limit to the length of command line arguments. + # Libtool will interpret -1 as no limit whatsoever + lt_cv_sys_max_cmd_len=-1; ;; - sequent) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' + + cygwin* | mingw* | cegcc*) + # On Win9x/ME, this test blows up -- it succeeds, but takes + # about 5 minutes as the teststring grows exponentially. + # Worse, since 9x/ME are not pre-emptively multitasking, + # you end up with a "frozen" computer, even though with patience + # the test eventually succeeds (with a max line length of 256k). + # Instead, let's just punt: use the minimum linelength reported by + # all of the supported platforms: 8192 (on NT/2K/XP). + lt_cv_sys_max_cmd_len=8192; ;; - sni) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" - lt_cv_file_magic_test_file=/lib/libc.so + + mint*) + # On MiNT this can take a long time and run out of memory. + lt_cv_sys_max_cmd_len=8192; ;; - siemens) - lt_cv_deplibs_check_method=pass_all + + amigaos*) + # On AmigaOS with pdksh, this test takes hours, literally. + # So we just punt and use a minimum line length of 8192. + lt_cv_sys_max_cmd_len=8192; ;; - esac - ;; -sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7* | sysv4*uw2*) - lt_cv_deplibs_check_method=pass_all - ;; -esac + netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) + # This has been around since 386BSD, at least. Likely further. + if test -x /sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` + elif test -x /usr/sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` + else + lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs + fi + # And add a safety zone + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + ;; + + interix*) + # We know the value 262144 and hardcode it with a safety zone (like BSD) + lt_cv_sys_max_cmd_len=196608 + ;; + + os2*) + # The test takes a long time on OS/2. + lt_cv_sys_max_cmd_len=8192 + ;; + + osf*) + # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure + # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not + # nice to cause kernel panics so lets avoid the loop below. + # First set a reasonable default. + lt_cv_sys_max_cmd_len=16384 + # + if test -x /sbin/sysconfig; then + case `/sbin/sysconfig -q proc exec_disable_arg_limit` in + *1*) lt_cv_sys_max_cmd_len=-1 ;; + esac + fi + ;; + sco3.2v5*) + lt_cv_sys_max_cmd_len=102400 + ;; + sysv5* | sco5v6* | sysv4.2uw2*) + kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` + if test -n "$kargmax"; then + lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` + else + lt_cv_sys_max_cmd_len=32768 + fi + ;; + *) + lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` + if test -n "$lt_cv_sys_max_cmd_len"; then + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + else + # Make teststring a little bigger before we do anything with it. + # a 1K string should be a reasonable start. + for i in 1 2 3 4 5 6 7 8 ; do + teststring=$teststring$teststring + done + SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} + # If test is not a shell built-in, we'll probably end up computing a + # maximum length that is only half of the actual maximum length, but + # we can't tell. + while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \ + = "X$teststring$teststring"; } >/dev/null 2>&1 && + test $i != 17 # 1/2 MB should be enough + do + i=`expr $i + 1` + teststring=$teststring$teststring + done + # Only check the string length outside the loop. + lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` + teststring= + # Add a significant safety factor because C++ compilers can tack on + # massive amounts of additional arguments before passing them to the + # linker. It appears as though 1/2 is a usable value. + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` + fi + ;; + esac fi -echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 -echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6 -file_magic_cmd=$lt_cv_file_magic_cmd -deplibs_check_method=$lt_cv_deplibs_check_method -test -z "$deplibs_check_method" && deplibs_check_method=unknown +if test -n $lt_cv_sys_max_cmd_len ; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5 +$as_echo "$lt_cv_sys_max_cmd_len" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5 +$as_echo "none" >&6; } +fi +max_cmd_len=$lt_cv_sys_max_cmd_len -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} -# Allow CC to be a program name with arguments. -compiler=$CC -# Check whether --enable-libtool-lock or --disable-libtool-lock was given. -if test "${enable_libtool_lock+set}" = set; then - enableval="$enable_libtool_lock" +: ${CP="cp -f"} +: ${MV="mv -f"} +: ${RM="rm -f"} + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5 +$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; } +# Try some XSI features +xsi_shell=no +( _lt_dummy="a/b/c" + test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ + = c,a/b,b/c, \ + && eval 'test $(( 1 + 1 )) -eq 2 \ + && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ + && xsi_shell=yes +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5 +$as_echo "$xsi_shell" >&6; } + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5 +$as_echo_n "checking whether the shell understands \"+=\"... " >&6; } +lt_shell_append=no +( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \ + >/dev/null 2>&1 \ + && lt_shell_append=yes +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5 +$as_echo "$lt_shell_append" >&6; } -fi; -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes -# Some flags need to be propagated to the compiler or linker for good -# libtool support. -case $host in -ia64-*-hpux*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - case `/usr/bin/file conftest.$ac_objext` in - *ELF-32*) - HPUX_IA64_MODE="32" - ;; - *ELF-64*) - HPUX_IA64_MODE="64" - ;; - esac - fi - rm -rf conftest* +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + lt_unset=unset +else + lt_unset=false +fi + + + + + +# test EBCDIC or ASCII +case `echo X|tr X '\101'` in + A) # ASCII based system + # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr + lt_SP2NL='tr \040 \012' + lt_NL2SP='tr \015\012 \040\040' ;; -*-*-irix6*) - # Find out which ABI we are using. - echo '#line 4138 "configure"' > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - if test "$lt_cv_prog_gnu_ld" = yes; then - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -melf32bsmip" - ;; - *N32*) - LD="${LD-ld} -melf32bmipn32" - ;; - *64-bit*) - LD="${LD-ld} -melf64bmip" - ;; - esac - else - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -32" - ;; - *N32*) - LD="${LD-ld} -n32" - ;; - *64-bit*) - LD="${LD-ld} -64" - ;; - esac - fi - fi - rm -rf conftest* + *) # EBCDIC based system + lt_SP2NL='tr \100 \n' + lt_NL2SP='tr \r\n \100\100' ;; +esac -x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - case `/usr/bin/file conftest.o` in - *32-bit*) - case $host in - x86_64-*linux*) - LD="${LD-ld} -m elf_i386" - ;; - ppc64-*linux*|powerpc64-*linux*) - LD="${LD-ld} -m elf32ppclinux" - ;; - s390x-*linux*) - LD="${LD-ld} -m elf_s390" - ;; - sparc64-*linux*) - LD="${LD-ld} -m elf32_sparc" - ;; - esac - ;; - *64-bit*) - case $host in - x86_64-*linux*) - LD="${LD-ld} -m elf_x86_64" - ;; - ppc*-*linux*|powerpc*-*linux*) - LD="${LD-ld} -m elf64ppc" - ;; - s390*-*linux*) - LD="${LD-ld} -m elf64_s390" - ;; - sparc*-*linux*) - LD="${LD-ld} -m elf64_sparc" - ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; -*-*-linux*) - # Test if the compiler is 64bit - echo 'int i;' > conftest.$ac_ext - lt_cv_cc_64bit_output=no - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - case `/usr/bin/file conftest.$ac_objext` in - *"ELF 64"*) - lt_cv_cc_64bit_output=yes - ;; - esac - fi - rm -rf conftest* - ;; -*-*-sco3.2v5*) - # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -belf" - echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 -echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6 -if test "${lt_cv_cc_needs_belf+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -int -main () -{ - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - lt_cv_cc_needs_belf=yes + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5 +$as_echo_n "checking how to convert $build file names to $host format... " >&6; } +if ${lt_cv_to_host_file_cmd+:} false; then : + $as_echo_n "(cached) " >&6 else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + case $host in + *-*-mingw* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 + ;; + *-*-cygwin* ) + lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 + ;; + * ) # otherwise, assume *nix + lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 + ;; + esac + ;; + *-*-cygwin* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin + ;; + *-*-cygwin* ) + lt_cv_to_host_file_cmd=func_convert_file_noop + ;; + * ) # otherwise, assume *nix + lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin + ;; + esac + ;; + * ) # unhandled hosts (and "normal" native builds) + lt_cv_to_host_file_cmd=func_convert_file_noop + ;; +esac -lt_cv_cc_needs_belf=no fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -fi -echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 -echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6 - if test x"$lt_cv_cc_needs_belf" != x"yes"; then - # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS="$SAVE_CFLAGS" - fi - ;; +to_host_file_cmd=$lt_cv_to_host_file_cmd +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5 +$as_echo "$lt_cv_to_host_file_cmd" >&6; } -esac -need_locks="$enable_libtool_lock" -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 -echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6 -# On Suns, sometimes $CPP names a directory. -if test -n "$CPP" && test -d "$CPP"; then - CPP= -fi -if test -z "$CPP"; then - if test "${ac_cv_prog_CPP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - # Double quotes because CPP needs to be expanded - for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" - do - ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - : + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5 +$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; } +if ${lt_cv_to_tool_file_cmd+:} false; then : + $as_echo_n "(cached) " >&6 else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + #assume ordinary cross tools, or native build. +lt_cv_to_tool_file_cmd=func_convert_file_noop +case $host in + *-*-mingw* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 + ;; + esac + ;; +esac - # Broken: fails on valid input. -continue fi -rm -f conftest.err conftest.$ac_ext - # OK, works on sane cases. Now check whether non-existent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi +to_tool_file_cmd=$lt_cv_to_tool_file_cmd +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5 +$as_echo "$lt_cv_to_tool_file_cmd" >&6; } + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5 +$as_echo_n "checking for $LD option to reload object files... " >&6; } +if ${lt_cv_ld_reload_flag+:} false; then : + $as_echo_n "(cached) " >&6 else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - # Broken: success on invalid input. -continue -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then - break + lt_cv_ld_reload_flag='-r' fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5 +$as_echo "$lt_cv_ld_reload_flag" >&6; } +reload_flag=$lt_cv_ld_reload_flag +case $reload_flag in +"" | " "*) ;; +*) reload_flag=" $reload_flag" ;; +esac +reload_cmds='$LD$reload_flag -o $output$reload_objs' +case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + if test "$GCC" != yes; then + reload_cmds=false + fi + ;; + darwin*) + if test "$GCC" = yes; then + reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' + else + reload_cmds='$LD$reload_flag -o $output$reload_objs' + fi + ;; +esac - done - ac_cv_prog_CPP=$CPP -fi - CPP=$ac_cv_prog_CPP -else - ac_cv_prog_CPP=$CPP -fi -echo "$as_me:$LINENO: result: $CPP" >&5 -echo "${ECHO_T}$CPP" >&6 -ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.$ac_ext - # OK, works on sane cases. Now check whether non-existent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - # Broken: success on invalid input. -continue -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.$ac_ext -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then - : -else - { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details." >&5 -echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -fi -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -echo "$as_me:$LINENO: checking for ANSI C header files" >&5 -echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 -if test "${ac_cv_header_stdc+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. +set dummy ${ac_tool_prefix}objdump; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_OBJDUMP+:} false; then : + $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -#include -#include -#include - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_header_stdc=yes + if test -n "$OBJDUMP"; then + ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_header_stdc=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext - -if test $ac_cv_header_stdc = yes; then - # SunOS 4.x string.h does not declare mem*, contrary to ANSI. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "memchr" >/dev/null 2>&1; then - : -else - ac_cv_header_stdc=no fi -rm -f conftest* - fi - -if test $ac_cv_header_stdc = yes; then - # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "free" >/dev/null 2>&1; then - : +OBJDUMP=$ac_cv_prog_OBJDUMP +if test -n "$OBJDUMP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 +$as_echo "$OBJDUMP" >&6; } else - ac_cv_header_stdc=no + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi -rm -f conftest* -fi -if test $ac_cv_header_stdc = yes; then - # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. - if test "$cross_compiling" = yes; then - : +fi +if test -z "$ac_cv_prog_OBJDUMP"; then + ac_ct_OBJDUMP=$OBJDUMP + # Extract the first word of "objdump", so it can be a program name with args. +set dummy objdump; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then : + $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -#if ((' ' & 0x0FF) == 0x020) -# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -#else -# define ISLOWER(c) \ - (('a' <= (c) && (c) <= 'i') \ - || ('j' <= (c) && (c) <= 'r') \ - || ('s' <= (c) && (c) <= 'z')) -# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) -#endif - -#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) -int -main () -{ - int i; - for (i = 0; i < 256; i++) - if (XOR (islower (i), ISLOWER (i)) - || toupper (i) != TOUPPER (i)) - exit(2); - exit (0); -} -_ACEOF -rm -f conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - : + if test -n "$ac_ct_OBJDUMP"; then + ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. else - echo "$as_me: program exited with status $ac_status" >&5 -echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_OBJDUMP="objdump" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS -( exit $ac_status ) -ac_cv_header_stdc=no -fi -rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi fi +ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP +if test -n "$ac_ct_OBJDUMP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 +$as_echo "$ac_ct_OBJDUMP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi -echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 -echo "${ECHO_T}$ac_cv_header_stdc" >&6 -if test $ac_cv_header_stdc = yes; then - -cat >>confdefs.h <<\_ACEOF -#define STDC_HEADERS 1 -_ACEOF + if test "x$ac_ct_OBJDUMP" = x; then + OBJDUMP="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OBJDUMP=$ac_ct_OBJDUMP + fi +else + OBJDUMP="$ac_cv_prog_OBJDUMP" fi -# On IRIX 5.3, sys/types and inttypes.h are conflicting. - +test -z "$OBJDUMP" && OBJDUMP=objdump @@ -4726,841 +5507,861 @@ fi -for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ - inttypes.h stdint.h unistd.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - eval "$as_ac_Header=yes" +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5 +$as_echo_n "checking how to recognize dependent libraries... " >&6; } +if ${lt_cv_deplibs_check_method+:} false; then : + $as_echo_n "(cached) " >&6 else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -eval "$as_ac_Header=no" -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF + lt_cv_file_magic_cmd='$MAGIC_CMD' +lt_cv_file_magic_test_file= +lt_cv_deplibs_check_method='unknown' +# Need to set the preceding variable on all platforms that support +# interlibrary dependencies. +# 'none' -- dependencies not supported. +# `unknown' -- same as none, but documents that we really don't know. +# 'pass_all' -- all dependencies passed with no checks. +# 'test_compile' -- check by making test program. +# 'file_magic [[regex]]' -- check by looking for files in library path +# which responds to the $file_magic_cmd with a given extended regex. +# If you have `file' or equivalent on your system and you're not sure +# whether `pass_all' will *always* work, you probably want this one. -fi +case $host_os in +aix[4-9]*) + lt_cv_deplibs_check_method=pass_all + ;; -done +beos*) + lt_cv_deplibs_check_method=pass_all + ;; +bsdi[45]*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' + lt_cv_file_magic_cmd='/usr/bin/file -L' + lt_cv_file_magic_test_file=/shlib/libc.so + ;; +cygwin*) + # func_win32_libid is a shell function defined in ltmain.sh + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + ;; -for ac_header in dlfcn.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -else - # Is the header compilable? -echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +mingw* | pw32*) + # Base MSYS/MinGW do not provide the 'file' command needed by + # func_win32_libid shell function, so use a weaker test based on 'objdump', + # unless we find 'file', for example because we are cross-compiling. + # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin. + if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + else + # Keep this pattern in sync with the one in func_win32_libid. + lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' + lt_cv_file_magic_cmd='$OBJDUMP -f' + fi + ;; -ac_header_compiler=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 +cegcc*) + # use the weaker test based on 'objdump'. See mingw*. + lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' + ;; -# Is the header present? -echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag +darwin* | rhapsody*) + lt_cv_deplibs_check_method=pass_all + ;; + +freebsd* | dragonfly*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; + esac else - ac_cpp_err= + lt_cv_deplibs_check_method=pass_all fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - ac_header_preproc=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + ;; - ac_header_preproc=no -fi -rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 +gnu*) + lt_cv_deplibs_check_method=pass_all + ;; -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes +haiku*) + lt_cv_deplibs_check_method=pass_all + ;; + +hpux10.20* | hpux11*) + lt_cv_file_magic_cmd=/usr/bin/file + case $host_cpu in + ia64*) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' + lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so ;; - no:yes:* ) - { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - ( - cat <<\_ASBOX -## ------------------------------------------ ## -## Report this to the AC_PACKAGE_NAME lists. ## -## ------------------------------------------ ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 + hppa*64*) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]' + lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl + ;; + *) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library' + lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; + esac + ;; + +interix[3-9]*) + # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' + ;; + +irix5* | irix6* | nonstopux*) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; + esac + lt_cv_deplibs_check_method=pass_all + ;; + +# This must be glibc/ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu) + lt_cv_deplibs_check_method=pass_all + ;; + +netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' + fi + ;; + +newos6*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; + +*nto* | *qnx*) + lt_cv_deplibs_check_method=pass_all + ;; + +openbsd*) + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + fi + ;; + +osf3* | osf4* | osf5*) + lt_cv_deplibs_check_method=pass_all + ;; + +rdos*) + lt_cv_deplibs_check_method=pass_all + ;; + +solaris*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv4 | sysv4.3*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + ;; + ncr) + lt_cv_deplibs_check_method=pass_all + ;; + sequent) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;; + sni) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" + lt_cv_file_magic_test_file=/lib/libc.so + ;; + siemens) + lt_cv_deplibs_check_method=pass_all + ;; + pc) + lt_cv_deplibs_check_method=pass_all + ;; + esac + ;; + +tpf*) + lt_cv_deplibs_check_method=pass_all + ;; esac -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - eval "$as_ac_Header=\$ac_header_preproc" -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 fi -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5 +$as_echo "$lt_cv_deplibs_check_method" >&6; } +file_magic_glob= +want_nocaseglob=no +if test "$build" = "$host"; then + case $host_os in + mingw* | pw32*) + if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then + want_nocaseglob=yes + else + file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"` + fi + ;; + esac fi -done +file_magic_cmd=$lt_cv_file_magic_cmd +deplibs_check_method=$lt_cv_deplibs_check_method +test -z "$deplibs_check_method" && deplibs_check_method=unknown -if test -n "$CXX" && ( test "X$CXX" != "Xno" && - ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || - (test "X$CXX" != "Xg++"))) ; then - ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu -echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5 -echo $ECHO_N "checking how to run the C++ preprocessor... $ECHO_C" >&6 -if test -z "$CXXCPP"; then - if test "${ac_cv_prog_CXXCPP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + + + + + + + + + + + + + + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. +set dummy ${ac_tool_prefix}dlltool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_DLLTOOL+:} false; then : + $as_echo_n "(cached) " >&6 else - # Double quotes because CXXCPP needs to be expanded - for CXXCPP in "$CXX -E" "/lib/cpp" - do - ac_preproc_ok=false -for ac_cxx_preproc_warn_flag in '' yes + if test -n "$DLLTOOL"; then + ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_cxx_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag - else - ac_cpp_err= + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 fi -else - ac_cpp_err=yes +done + done +IFS=$as_save_IFS + fi -if test -z "$ac_cpp_err"; then - : +fi +DLLTOOL=$ac_cv_prog_DLLTOOL +if test -n "$DLLTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5 +$as_echo "$DLLTOOL" >&6; } else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Broken: fails on valid input. -continue + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi -rm -f conftest.err conftest.$ac_ext - # OK, works on sane cases. Now check whether non-existent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_cxx_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes + fi -if test -z "$ac_cpp_err"; then - # Broken: success on invalid input. -continue +if test -z "$ac_cv_prog_DLLTOOL"; then + ac_ct_DLLTOOL=$DLLTOOL + # Extract the first word of "dlltool", so it can be a program name with args. +set dummy dlltool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then : + $as_echo_n "(cached) " >&6 else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then - break -fi - - done - ac_cv_prog_CXXCPP=$CXXCPP - -fi - CXXCPP=$ac_cv_prog_CXXCPP + if test -n "$ac_ct_DLLTOOL"; then + ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. else - ac_cv_prog_CXXCPP=$CXXCPP -fi -echo "$as_me:$LINENO: result: $CXXCPP" >&5 -echo "${ECHO_T}$CXXCPP" >&6 -ac_preproc_ok=false -for ac_cxx_preproc_warn_flag in '' yes +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_cxx_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag - else - ac_cpp_err= + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_DLLTOOL="dlltool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 fi -else - ac_cpp_err=yes +done + done +IFS=$as_save_IFS + fi -if test -z "$ac_cpp_err"; then - : +fi +ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL +if test -n "$ac_ct_DLLTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5 +$as_echo "$ac_ct_DLLTOOL" >&6; } else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Broken: fails on valid input. -continue + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi -rm -f conftest.err conftest.$ac_ext - # OK, works on sane cases. Now check whether non-existent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_cxx_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag + if test "x$ac_ct_DLLTOOL" = x; then + DLLTOOL="false" else - ac_cpp_err= + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DLLTOOL=$ac_ct_DLLTOOL fi else - ac_cpp_err=yes + DLLTOOL="$ac_cv_prog_DLLTOOL" fi -if test -z "$ac_cpp_err"; then - # Broken: success on invalid input. -continue -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.$ac_ext +test -z "$DLLTOOL" && DLLTOOL=dlltool -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then - : + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5 +$as_echo_n "checking how to associate runtime and link libraries... " >&6; } +if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then : + $as_echo_n "(cached) " >&6 else - { { echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check -See \`config.log' for more details." >&5 -echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -fi + lt_cv_sharedlib_from_linklib_cmd='unknown' -ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu +case $host_os in +cygwin* | mingw* | pw32* | cegcc*) + # two different shell functions defined in ltmain.sh + # decide which to use based on capabilities of $DLLTOOL + case `$DLLTOOL --help 2>&1` in + *--identify-strict*) + lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib + ;; + *) + lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback + ;; + esac + ;; +*) + # fallback: assume linklib IS sharedlib + lt_cv_sharedlib_from_linklib_cmd="$ECHO" + ;; +esac fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5 +$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; } +sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd +test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO + + + + + + -ac_ext=f -ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5' -ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_f77_compiler_gnu if test -n "$ac_tool_prefix"; then - for ac_prog in g77 f77 xlf frt pgf77 fort77 fl32 af77 f90 xlf90 pgf90 epcf90 f95 fort xlf95 ifc efc pgf95 lf95 gfortran + for ac_prog in ar do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_F77+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AR+:} false; then : + $as_echo_n "(cached) " >&6 else - if test -n "$F77"; then - ac_cv_prog_F77="$F77" # Let the user override the test. + if test -n "$AR"; then + ac_cv_prog_AR="$AR" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_F77="$ac_tool_prefix$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_AR="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done +IFS=$as_save_IFS fi fi -F77=$ac_cv_prog_F77 -if test -n "$F77"; then - echo "$as_me:$LINENO: result: $F77" >&5 -echo "${ECHO_T}$F77" >&6 +AR=$ac_cv_prog_AR +if test -n "$AR"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 +$as_echo "$AR" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi - test -n "$F77" && break + + test -n "$AR" && break done fi -if test -z "$F77"; then - ac_ct_F77=$F77 - for ac_prog in g77 f77 xlf frt pgf77 fort77 fl32 af77 f90 xlf90 pgf90 epcf90 f95 fort xlf95 ifc efc pgf95 lf95 gfortran +if test -z "$AR"; then + ac_ct_AR=$AR + for ac_prog in ar do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_F77+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_AR+:} false; then : + $as_echo_n "(cached) " >&6 else - if test -n "$ac_ct_F77"; then - ac_cv_prog_ac_ct_F77="$ac_ct_F77" # Let the user override the test. + if test -n "$ac_ct_AR"; then + ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_F77="$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_AR="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done +IFS=$as_save_IFS fi fi -ac_ct_F77=$ac_cv_prog_ac_ct_F77 -if test -n "$ac_ct_F77"; then - echo "$as_me:$LINENO: result: $ac_ct_F77" >&5 -echo "${ECHO_T}$ac_ct_F77" >&6 +ac_ct_AR=$ac_cv_prog_ac_ct_AR +if test -n "$ac_ct_AR"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 +$as_echo "$ac_ct_AR" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi - test -n "$ac_ct_F77" && break + + test -n "$ac_ct_AR" && break done - F77=$ac_ct_F77 + if test "x$ac_ct_AR" = x; then + AR="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + AR=$ac_ct_AR + fi fi +: ${AR=ar} +: ${AR_FLAGS=cru} -# Provide some information about the compiler. -echo "$as_me:5271:" \ - "checking for Fortran 77 compiler version" >&5 -ac_compiler=`set X $ac_compile; echo $2` -{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 - (eval $ac_compiler --version &5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 - (eval $ac_compiler -v &5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 - (eval $ac_compiler -V &5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -rm -f a.out - -# If we don't use `.F' as extension, the preprocessor is not run on the -# input file. (Note that this only needs to work for GNU compilers.) -ac_save_ext=$ac_ext -ac_ext=F -echo "$as_me:$LINENO: checking whether we are using the GNU Fortran 77 compiler" >&5 -echo $ECHO_N "checking whether we are using the GNU Fortran 77 compiler... $ECHO_C" >&6 -if test "${ac_cv_f77_compiler_gnu+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF - program main -#ifndef __GNUC__ - choke me -#endif - end -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_f77_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_compiler_gnu=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 -ac_compiler_gnu=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -ac_cv_f77_compiler_gnu=$ac_compiler_gnu -fi -echo "$as_me:$LINENO: result: $ac_cv_f77_compiler_gnu" >&5 -echo "${ECHO_T}$ac_cv_f77_compiler_gnu" >&6 -ac_ext=$ac_save_ext -ac_test_FFLAGS=${FFLAGS+set} -ac_save_FFLAGS=$FFLAGS -FFLAGS= -echo "$as_me:$LINENO: checking whether $F77 accepts -g" >&5 -echo $ECHO_N "checking whether $F77 accepts -g... $ECHO_C" >&6 -if test "${ac_cv_prog_f77_g+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - FFLAGS=-g -cat >conftest.$ac_ext <<_ACEOF - program main - - end -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_f77_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_prog_f77_g=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_prog_f77_g=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_prog_f77_g" >&5 -echo "${ECHO_T}$ac_cv_prog_f77_g" >&6 -if test "$ac_test_FFLAGS" = set; then - FFLAGS=$ac_save_FFLAGS -elif test $ac_cv_prog_f77_g = yes; then - if test "x$ac_cv_f77_compiler_gnu" = xyes; then - FFLAGS="-g -O2" - else - FFLAGS="-g" - fi -else - if test "x$ac_cv_f77_compiler_gnu" = xyes; then - FFLAGS="-O2" - else - FFLAGS= - fi -fi -G77=`test $ac_compiler_gnu = yes && echo yes` -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! -# find the maximum length of command line arguments -echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5 -echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6 -if test "${lt_cv_sys_max_cmd_len+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5 +$as_echo_n "checking for archiver @FILE support... " >&6; } +if ${lt_cv_ar_at_file+:} false; then : + $as_echo_n "(cached) " >&6 else - i=0 - teststring="ABCD" - - case $build_os in - msdosdjgpp*) - # On DJGPP, this test can blow up pretty badly due to problems in libc - # (any single argument exceeding 2000 bytes causes a buffer overrun - # during glob expansion). Even if it were fixed, the result of this - # check would be larger than it should be. - lt_cv_sys_max_cmd_len=12288; # 12K is about right - ;; - - gnu*) - # Under GNU Hurd, this test is not required because there is - # no limit to the length of command line arguments. - # Libtool will interpret -1 as no limit whatsoever - lt_cv_sys_max_cmd_len=-1; - ;; + lt_cv_ar_at_file=no + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ - cygwin* | mingw*) - # On Win9x/ME, this test blows up -- it succeeds, but takes - # about 5 minutes as the teststring grows exponentially. - # Worse, since 9x/ME are not pre-emptively multitasking, - # you end up with a "frozen" computer, even though with patience - # the test eventually succeeds (with a max line length of 256k). - # Instead, let's just punt: use the minimum linelength reported by - # all of the supported platforms: 8192 (on NT/2K/XP). - lt_cv_sys_max_cmd_len=8192; - ;; +int +main () +{ - amigaos*) - # On AmigaOS with pdksh, this test takes hours, literally. - # So we just punt and use a minimum line length of 8192. - lt_cv_sys_max_cmd_len=8192; - ;; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + echo conftest.$ac_objext > conftest.lst + lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5' + { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 + (eval $lt_ar_try) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if test "$ac_status" -eq 0; then + # Ensure the archiver fails upon bogus file names. + rm -f conftest.$ac_objext libconftest.a + { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 + (eval $lt_ar_try) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if test "$ac_status" -ne 0; then + lt_cv_ar_at_file=@ + fi + fi + rm -f conftest.* libconftest.a - netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) - # This has been around since 386BSD, at least. Likely further. - if test -x /sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` - elif test -x /usr/sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` - else - lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs - fi - # And add a safety zone - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - ;; - osf*) - # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure - # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not - # nice to cause kernel panics so lets avoid the loop below. - # First set a reasonable default. - lt_cv_sys_max_cmd_len=16384 - # - if test -x /sbin/sysconfig; then - case `/sbin/sysconfig -q proc exec_disable_arg_limit` in - *1*) lt_cv_sys_max_cmd_len=-1 ;; - esac - fi - ;; - *) - # If test is not a shell built-in, we'll probably end up computing a - # maximum length that is only half of the actual maximum length, but - # we can't tell. - SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} - while (test "X"`$SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \ - = "XX$teststring") >/dev/null 2>&1 && - new_result=`expr "X$teststring" : ".*" 2>&1` && - lt_cv_sys_max_cmd_len=$new_result && - test $i != 17 # 1/2 MB should be enough - do - i=`expr $i + 1` - teststring=$teststring$teststring - done - teststring= - # Add a significant safety factor because C++ compilers can tack on massive - # amounts of additional arguments before passing them to the linker. - # It appears as though 1/2 is a usable value. - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` - ;; - esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5 +$as_echo "$lt_cv_ar_at_file" >&6; } -if test -n $lt_cv_sys_max_cmd_len ; then - echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5 -echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6 +if test "x$lt_cv_ar_at_file" = xno; then + archiver_list_spec= else - echo "$as_me:$LINENO: result: none" >&5 -echo "${ECHO_T}none" >&6 + archiver_list_spec=$lt_cv_ar_at_file fi -# Check for command to grab the raw symbol name followed by C symbol from nm. -echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5 -echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6 -if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - -# These are sane defaults that work on at least a few old systems. -# [They come from Ultrix. What could be older than Ultrix?!! ;)] - -# Character class describing NM global symbol codes. -symcode='[BCDEGRST]' - -# Regexp to match symbols that can be accessed directly from C. -sympat='\([_A-Za-z][_A-Za-z0-9]*\)' -# Transform an extracted symbol line into a proper C declaration -lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'" -# Transform an extracted symbol line into symbol name and symbol address -lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" -# Define system-specific variables. -case $host_os in -aix*) - symcode='[BCDT]' - ;; -cygwin* | mingw* | pw32*) - symcode='[ABCDGISTW]' - ;; -hpux*) # Its linker distinguishes data from code symbols - if test "$host_cpu" = ia64; then - symcode='[ABCDEGRST]' +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 +$as_echo "$STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_STRIP="strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 +$as_echo "$ac_ct_STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_STRIP" = x; then + STRIP=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + STRIP=$ac_ct_STRIP + fi +else + STRIP="$ac_cv_prog_STRIP" +fi + +test -z "$STRIP" && STRIP=: + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. +set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_RANLIB+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +RANLIB=$ac_cv_prog_RANLIB +if test -n "$RANLIB"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 +$as_echo "$RANLIB" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_RANLIB"; then + ac_ct_RANLIB=$RANLIB + # Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_RANLIB+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_RANLIB"; then + ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_RANLIB="ranlib" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB +if test -n "$ac_ct_RANLIB"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 +$as_echo "$ac_ct_RANLIB" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_RANLIB" = x; then + RANLIB=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + RANLIB=$ac_ct_RANLIB fi - lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" - lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" +else + RANLIB="$ac_cv_prog_RANLIB" +fi + +test -z "$RANLIB" && RANLIB=: + + + + + + +# Determine commands to create old-style static archives. +old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= + +if test -n "$RANLIB"; then + case $host_os in + openbsd*) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" + ;; + *) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib" + ;; + esac + old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib" +fi + +case $host_os in + darwin*) + lock_old_archive_extraction=yes ;; + *) + lock_old_archive_extraction=no ;; +esac + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC + + +# Check for command to grab the raw symbol name followed by C symbol from nm. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5 +$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; } +if ${lt_cv_sys_global_symbol_pipe+:} false; then : + $as_echo_n "(cached) " >&6 +else + +# These are sane defaults that work on at least a few old systems. +# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +# Character class describing NM global symbol codes. +symcode='[BCDEGRST]' + +# Regexp to match symbols that can be accessed directly from C. +sympat='\([_A-Za-z][_A-Za-z0-9]*\)' + +# Define system-specific variables. +case $host_os in +aix*) + symcode='[BCDT]' ;; -linux*) +cygwin* | mingw* | pw32* | cegcc*) + symcode='[ABCDGISTW]' + ;; +hpux*) if test "$host_cpu" = ia64; then - symcode='[ABCDGIRSTW]' - lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" - lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + symcode='[ABCDEGRST]' fi ;; irix* | nonstopux*) @@ -5569,65 +6370,104 @@ irix* | nonstopux*) osf*) symcode='[BCDEGQRST]' ;; -solaris* | sysv5*) +solaris*) symcode='[BDRT]' ;; +sco3.2v5*) + symcode='[DT]' + ;; +sysv4.2uw2*) + symcode='[DT]' + ;; +sysv5* | sco5v6* | unixware* | OpenUNIX*) + symcode='[ABDT]' + ;; sysv4) symcode='[DFNSTU]' ;; esac +# If we're using GNU nm, then use its standard symbol codes. +case `$NM -V 2>&1` in +*GNU* | *'with BFD'*) + symcode='[ABCDGIRSTW]' ;; +esac + +# Transform an extracted symbol line into a proper C declaration. +# Some systems (esp. on ia64) link data and code symbols differently, +# so use this general approach. +lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + +# Transform an extracted symbol line into symbol name and symbol address +lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'" +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'" + # Handle CRLF in mingw tool chain opt_cr= case $build_os in mingw*) - opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp + opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp ;; esac -# If we're using GNU nm, then use its standard symbol codes. -case `$NM -V 2>&1` in -*GNU* | *'with BFD'*) - symcode='[ABCDGIRSTW]' ;; -esac - -# Try without a prefix undercore, then with it. +# Try without a prefix underscore, then with it. for ac_symprfx in "" "_"; do # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. symxfrm="\\1 $ac_symprfx\\2 \\2" # Write the raw and C identifiers. - lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + if test "$lt_cv_nm_interface" = "MS dumpbin"; then + # Fake it for dumpbin and say T for any non-static function + # and D for any global variable. + # Also find C++ and __fastcall symbols from MSVC++, + # which start with @ or ?. + lt_cv_sys_global_symbol_pipe="$AWK '"\ +" {last_section=section; section=\$ 3};"\ +" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ +" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ +" \$ 0!~/External *\|/{next};"\ +" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ +" {if(hide[section]) next};"\ +" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ +" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ +" s[1]~/^[@?]/{print s[1], s[1]; next};"\ +" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ +" ' prfx=^$ac_symprfx" + else + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + fi + lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" # Check to see that the pipe works correctly. pipe_works=no rm -f conftest* - cat > conftest.$ac_ext < conftest.$ac_ext <<_LT_EOF #ifdef __cplusplus extern "C" { #endif char nm_test_var; -void nm_test_func(){} +void nm_test_func(void); +void nm_test_func(void){} #ifdef __cplusplus } #endif int main(){nm_test_var='a';nm_test_func();return(0);} -EOF +_LT_EOF - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then # Now try to grab the symbols. nlist=conftest.nm - if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5 - (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5 + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5 + (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5 ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s "$nlist"; then + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s "$nlist"; then # Try sorting and uniquifying the output. if sort "$nlist" | uniq > "$nlist"T; then mv -f "$nlist"T "$nlist" @@ -5636,57 +6476,71 @@ EOF fi # Make sure that we snagged all the symbols we need. - if grep ' nm_test_var$' "$nlist" >/dev/null; then - if grep ' nm_test_func$' "$nlist" >/dev/null; then - cat < conftest.$ac_ext + if $GREP ' nm_test_var$' "$nlist" >/dev/null; then + if $GREP ' nm_test_func$' "$nlist" >/dev/null; then + cat <<_LT_EOF > conftest.$ac_ext +/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ +#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) +/* DATA imports from DLLs on WIN32 con't be const, because runtime + relocations are performed -- see ld's documentation on pseudo-relocs. */ +# define LT_DLSYM_CONST +#elif defined(__osf__) +/* This system does not cope well with relocations in const data. */ +# define LT_DLSYM_CONST +#else +# define LT_DLSYM_CONST const +#endif + #ifdef __cplusplus extern "C" { #endif -EOF +_LT_EOF # Now generate the symbol file. - eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext' + eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' - cat <> conftest.$ac_ext -#if defined (__STDC__) && __STDC__ -# define lt_ptr_t void * -#else -# define lt_ptr_t char * -# define const -#endif + cat <<_LT_EOF >> conftest.$ac_ext -/* The mapping between symbol names and symbols. */ -const struct { +/* The mapping between symbol names and symbols. */ +LT_DLSYM_CONST struct { const char *name; - lt_ptr_t address; + void *address; } -lt_preloaded_symbols[] = +lt__PROGRAM__LTX_preloaded_symbols[] = { -EOF - $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext - cat <<\EOF >> conftest.$ac_ext - {0, (lt_ptr_t) 0} + { "@PROGRAM@", (void *) 0 }, +_LT_EOF + $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext + cat <<\_LT_EOF >> conftest.$ac_ext + {0, (void *) 0} }; +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt__PROGRAM__LTX_preloaded_symbols; +} +#endif + #ifdef __cplusplus } #endif -EOF +_LT_EOF # Now try linking the two files. mv conftest.$ac_objext conftstm.$ac_objext - lt_save_LIBS="$LIBS" - lt_save_CFLAGS="$CFLAGS" + lt_globsym_save_LIBS=$LIBS + lt_globsym_save_CFLAGS=$CFLAGS LIBS="conftstm.$ac_objext" CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" - if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest${ac_exeext}; then + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s conftest${ac_exeext}; then pipe_works=yes fi - LIBS="$lt_save_LIBS" - CFLAGS="$lt_save_CFLAGS" + LIBS=$lt_globsym_save_LIBS + CFLAGS=$lt_globsym_save_CFLAGS else echo "cannot find nm_test_func in $nlist" >&5 fi @@ -5700,7 +6554,7 @@ EOF echo "$progname: failed program was:" >&5 cat conftest.$ac_ext >&5 fi - rm -f conftest* conftst* + rm -rf conftest* conftst* # Do not use the global_symbol_pipe unless it works. if test "$pipe_works" = yes; then @@ -5716,5889 +6570,3884 @@ if test -z "$lt_cv_sys_global_symbol_pip lt_cv_sys_global_symbol_to_cdecl= fi if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then - echo "$as_me:$LINENO: result: failed" >&5 -echo "${ECHO_T}failed" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5 +$as_echo "failed" >&6; } else - echo "$as_me:$LINENO: result: ok" >&5 -echo "${ECHO_T}ok" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 +$as_echo "ok" >&6; } fi -echo "$as_me:$LINENO: checking for objdir" >&5 -echo $ECHO_N "checking for objdir... $ECHO_C" >&6 -if test "${lt_cv_objdir+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - rm -f .libs 2>/dev/null -mkdir .libs 2>/dev/null -if test -d .libs; then - lt_cv_objdir=.libs -else - # MS-DOS does not allow filenames that begin with a dot. - lt_cv_objdir=_libs +# Response file support. +if test "$lt_cv_nm_interface" = "MS dumpbin"; then + nm_file_list_spec='@' +elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then + nm_file_list_spec='@' fi -rmdir .libs 2>/dev/null + + + + + + + + + + + + + + + + + + + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5 +$as_echo_n "checking for sysroot... " >&6; } + +# Check whether --with-sysroot was given. +if test "${with_sysroot+set}" = set; then : + withval=$with_sysroot; +else + with_sysroot=no fi -echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5 -echo "${ECHO_T}$lt_cv_objdir" >&6 -objdir=$lt_cv_objdir +lt_sysroot= +case ${with_sysroot} in #( + yes) + if test "$GCC" = yes; then + lt_sysroot=`$CC --print-sysroot 2>/dev/null` + fi + ;; #( + /*) + lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` + ;; #( + no|'') + ;; #( + *) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5 +$as_echo "${with_sysroot}" >&6; } + as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5 + ;; +esac + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5 +$as_echo "${lt_sysroot:-no}" >&6; } -case $host_os in -aix3*) - # AIX sometimes has problems with the GCC collect2 program. For some - # reason, if we set the COLLECT_NAMES environment variable, the problems - # vanish in a puff of smoke. - if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES + + + +# Check whether --enable-libtool-lock was given. +if test "${enable_libtool_lock+set}" = set; then : + enableval=$enable_libtool_lock; +fi + +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + +# Some flags need to be propagated to the compiler or linker for good +# libtool support. +case $host in +ia64-*-hpux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + case `/usr/bin/file conftest.$ac_objext` in + *ELF-32*) + HPUX_IA64_MODE="32" + ;; + *ELF-64*) + HPUX_IA64_MODE="64" + ;; + esac fi + rm -rf conftest* + ;; +*-*-irix6*) + # Find out which ABI we are using. + echo '#line '$LINENO' "configure"' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + if test "$lt_cv_prog_gnu_ld" = yes; then + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -melf32bsmip" + ;; + *N32*) + LD="${LD-ld} -melf32bmipn32" + ;; + *64-bit*) + LD="${LD-ld} -melf64bmip" + ;; + esac + else + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -32" + ;; + *N32*) + LD="${LD-ld} -n32" + ;; + *64-bit*) + LD="${LD-ld} -64" + ;; + esac + fi + fi + rm -rf conftest* ;; -esac -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed='sed -e 1s/^X//' -sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g' +x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ +s390*-*linux*|s390*-*tpf*|sparc*-*linux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + case `/usr/bin/file conftest.o` in + *32-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_i386_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_i386" + ;; + ppc64-*linux*|powerpc64-*linux*) + LD="${LD-ld} -m elf32ppclinux" + ;; + s390x-*linux*) + LD="${LD-ld} -m elf_s390" + ;; + sparc64-*linux*) + LD="${LD-ld} -m elf32_sparc" + ;; + esac + ;; + *64-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_x86_64_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_x86_64" + ;; + ppc*-*linux*|powerpc*-*linux*) + LD="${LD-ld} -m elf64ppc" + ;; + s390*-*linux*|s390*-*tpf*) + LD="${LD-ld} -m elf64_s390" + ;; + sparc*-*linux*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; -# Same as above, but do not quote variable references. -double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g' +*-*-sco3.2v5*) + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -belf" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5 +$as_echo_n "checking whether the C compiler needs -belf... " >&6; } +if ${lt_cv_cc_needs_belf+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ -# Sed substitution to avoid accidental globbing in evaled expressions -no_glob_subst='s/\*/\\\*/g' +int +main () +{ -# Constants: -rm="rm -f" + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + lt_cv_cc_needs_belf=yes +else + lt_cv_cc_needs_belf=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu -# Global variables: -default_ofile=libtool -can_build_shared=yes +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5 +$as_echo "$lt_cv_cc_needs_belf" >&6; } + if test x"$lt_cv_cc_needs_belf" != x"yes"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS="$SAVE_CFLAGS" + fi + ;; +*-*solaris*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + case `/usr/bin/file conftest.o` in + *64-bit*) + case $lt_cv_prog_gnu_ld in + yes*) + case $host in + i?86-*-solaris*) + LD="${LD-ld} -m elf_x86_64" + ;; + sparc*-*-solaris*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + # GNU ld 2.21 introduced _sol2 emulations. Use them if available. + if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then + LD="${LD-ld}_sol2" + fi + ;; + *) + if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then + LD="${LD-ld} -64" + fi + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; +esac -# All known linkers require a `.a' archive for static linking (except MSVC, -# which needs '.lib'). -libext=a -ltmain="$ac_aux_dir/ltmain.sh" -ofile="$default_ofile" -with_gnu_ld="$lt_cv_prog_gnu_ld" +need_locks="$enable_libtool_lock" if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. -set dummy ${ac_tool_prefix}ar; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_AR+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args. +set dummy ${ac_tool_prefix}mt; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_MANIFEST_TOOL+:} false; then : + $as_echo_n "(cached) " >&6 else - if test -n "$AR"; then - ac_cv_prog_AR="$AR" # Let the user override the test. + if test -n "$MANIFEST_TOOL"; then + ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_AR="${ac_tool_prefix}ar" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done +IFS=$as_save_IFS fi fi -AR=$ac_cv_prog_AR -if test -n "$AR"; then - echo "$as_me:$LINENO: result: $AR" >&5 -echo "${ECHO_T}$AR" >&6 +MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL +if test -n "$MANIFEST_TOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5 +$as_echo "$MANIFEST_TOOL" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi + fi -if test -z "$ac_cv_prog_AR"; then - ac_ct_AR=$AR - # Extract the first word of "ar", so it can be a program name with args. -set dummy ar; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_AR+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +if test -z "$ac_cv_prog_MANIFEST_TOOL"; then + ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL + # Extract the first word of "mt", so it can be a program name with args. +set dummy mt; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then : + $as_echo_n "(cached) " >&6 else - if test -n "$ac_ct_AR"; then - ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. + if test -n "$ac_ct_MANIFEST_TOOL"; then + ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_AR="ar" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_MANIFEST_TOOL="mt" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done +IFS=$as_save_IFS - test -z "$ac_cv_prog_ac_ct_AR" && ac_cv_prog_ac_ct_AR="false" fi fi -ac_ct_AR=$ac_cv_prog_ac_ct_AR -if test -n "$ac_ct_AR"; then - echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 -echo "${ECHO_T}$ac_ct_AR" >&6 +ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL +if test -n "$ac_ct_MANIFEST_TOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5 +$as_echo "$ac_ct_MANIFEST_TOOL" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi - AR=$ac_ct_AR + if test "x$ac_ct_MANIFEST_TOOL" = x; then + MANIFEST_TOOL=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL + fi else - AR="$ac_cv_prog_AR" + MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL" fi -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. -set dummy ${ac_tool_prefix}ranlib; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_RANLIB+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5 +$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; } +if ${lt_cv_path_mainfest_tool+:} false; then : + $as_echo_n "(cached) " >&6 else - if test -n "$RANLIB"; then - ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. + lt_cv_path_mainfest_tool=no + echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5 + $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out + cat conftest.err >&5 + if $GREP 'Manifest Tool' conftest.out > /dev/null; then + lt_cv_path_mainfest_tool=yes + fi + rm -f conftest* +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5 +$as_echo "$lt_cv_path_mainfest_tool" >&6; } +if test "x$lt_cv_path_mainfest_tool" != xyes; then + MANIFEST_TOOL=: +fi + + + + + + + case $host_os in + rhapsody* | darwin*) + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. +set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_DSYMUTIL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$DSYMUTIL"; then + ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done +IFS=$as_save_IFS fi fi -RANLIB=$ac_cv_prog_RANLIB -if test -n "$RANLIB"; then - echo "$as_me:$LINENO: result: $RANLIB" >&5 -echo "${ECHO_T}$RANLIB" >&6 +DSYMUTIL=$ac_cv_prog_DSYMUTIL +if test -n "$DSYMUTIL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5 +$as_echo "$DSYMUTIL" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi + fi -if test -z "$ac_cv_prog_RANLIB"; then - ac_ct_RANLIB=$RANLIB - # Extract the first word of "ranlib", so it can be a program name with args. -set dummy ranlib; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +if test -z "$ac_cv_prog_DSYMUTIL"; then + ac_ct_DSYMUTIL=$DSYMUTIL + # Extract the first word of "dsymutil", so it can be a program name with args. +set dummy dsymutil; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then : + $as_echo_n "(cached) " >&6 else - if test -n "$ac_ct_RANLIB"; then - ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. + if test -n "$ac_ct_DSYMUTIL"; then + ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_RANLIB="ranlib" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done +IFS=$as_save_IFS - test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":" fi fi -ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB -if test -n "$ac_ct_RANLIB"; then - echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 -echo "${ECHO_T}$ac_ct_RANLIB" >&6 +ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL +if test -n "$ac_ct_DSYMUTIL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5 +$as_echo "$ac_ct_DSYMUTIL" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi - RANLIB=$ac_ct_RANLIB + if test "x$ac_ct_DSYMUTIL" = x; then + DSYMUTIL=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DSYMUTIL=$ac_ct_DSYMUTIL + fi else - RANLIB="$ac_cv_prog_RANLIB" + DSYMUTIL="$ac_cv_prog_DSYMUTIL" fi -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -set dummy ${ac_tool_prefix}strip; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_STRIP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. +set dummy ${ac_tool_prefix}nmedit; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_NMEDIT+:} false; then : + $as_echo_n "(cached) " >&6 else - if test -n "$STRIP"; then - ac_cv_prog_STRIP="$STRIP" # Let the user override the test. + if test -n "$NMEDIT"; then + ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done +IFS=$as_save_IFS fi fi -STRIP=$ac_cv_prog_STRIP -if test -n "$STRIP"; then - echo "$as_me:$LINENO: result: $STRIP" >&5 -echo "${ECHO_T}$STRIP" >&6 +NMEDIT=$ac_cv_prog_NMEDIT +if test -n "$NMEDIT"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5 +$as_echo "$NMEDIT" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi + fi -if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +if test -z "$ac_cv_prog_NMEDIT"; then + ac_ct_NMEDIT=$NMEDIT + # Extract the first word of "nmedit", so it can be a program name with args. +set dummy nmedit; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then : + $as_echo_n "(cached) " >&6 else - if test -n "$ac_ct_STRIP"; then - ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. + if test -n "$ac_ct_NMEDIT"; then + ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_STRIP="strip" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_NMEDIT="nmedit" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done +IFS=$as_save_IFS - test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" fi fi -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -if test -n "$ac_ct_STRIP"; then - echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 -echo "${ECHO_T}$ac_ct_STRIP" >&6 +ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT +if test -n "$ac_ct_NMEDIT"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5 +$as_echo "$ac_ct_NMEDIT" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi - STRIP=$ac_ct_STRIP + if test "x$ac_ct_NMEDIT" = x; then + NMEDIT=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + NMEDIT=$ac_ct_NMEDIT + fi else - STRIP="$ac_cv_prog_STRIP" + NMEDIT="$ac_cv_prog_NMEDIT" fi + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. +set dummy ${ac_tool_prefix}lipo; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_LIPO+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$LIPO"; then + ac_cv_prog_LIPO="$LIPO" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_LIPO="${ac_tool_prefix}lipo" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS -old_CC="$CC" -old_CFLAGS="$CFLAGS" - -# Set sane defaults for various variables -test -z "$AR" && AR=ar -test -z "$AR_FLAGS" && AR_FLAGS=cru -test -z "$AS" && AS=as -test -z "$CC" && CC=cc -test -z "$LTCC" && LTCC=$CC -test -z "$DLLTOOL" && DLLTOOL=dlltool -test -z "$LD" && LD=ld -test -z "$LN_S" && LN_S="ln -s" -test -z "$MAGIC_CMD" && MAGIC_CMD=file -test -z "$NM" && NM=nm -test -z "$SED" && SED=sed -test -z "$OBJDUMP" && OBJDUMP=objdump -test -z "$RANLIB" && RANLIB=: -test -z "$STRIP" && STRIP=: -test -z "$ac_objext" && ac_objext=o +fi +fi +LIPO=$ac_cv_prog_LIPO +if test -n "$LIPO"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5 +$as_echo "$LIPO" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi -# Determine commands to create old-style static archives. -old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' -old_postinstall_cmds='chmod 644 $oldlib' -old_postuninstall_cmds= -if test -n "$RANLIB"; then - case $host_os in - openbsd*) - old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds" - ;; - *) - old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" - ;; - esac - old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" fi - -for cc_temp in $compiler""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac +if test -z "$ac_cv_prog_LIPO"; then + ac_ct_LIPO=$LIPO + # Extract the first word of "lipo", so it can be a program name with args. +set dummy lipo; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_LIPO+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_LIPO"; then + ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_LIPO="lipo" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi done -cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` - + done +IFS=$as_save_IFS -# Only perform the check for file, if the check method requires it -case $deplibs_check_method in -file_magic*) - if test "$file_magic_cmd" = '$MAGIC_CMD'; then - echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 -echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6 -if test "${lt_cv_path_MAGIC_CMD+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +fi +ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO +if test -n "$ac_ct_LIPO"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5 +$as_echo "$ac_ct_LIPO" >&6; } else - case $MAGIC_CMD in -[\\/*] | ?:[\\/]*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; -*) - lt_save_MAGIC_CMD="$MAGIC_CMD" - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" - for ac_dir in $ac_dummy; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/${ac_tool_prefix}file; then - lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - $EGREP "$file_magic_regex" > /dev/null; then - : - else - cat <&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi -EOF - fi ;; - esac - fi - break - fi - done - IFS="$lt_save_ifs" - MAGIC_CMD="$lt_save_MAGIC_CMD" - ;; + if test "x$ac_ct_LIPO" = x; then + LIPO=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; esac + LIPO=$ac_ct_LIPO + fi +else + LIPO="$ac_cv_prog_LIPO" fi -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 -echo "${ECHO_T}$MAGIC_CMD" >&6 + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. +set dummy ${ac_tool_prefix}otool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_OTOOL+:} false; then : + $as_echo_n "(cached) " >&6 else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi + if test -n "$OTOOL"; then + ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_OTOOL="${ac_tool_prefix}otool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS -if test -z "$lt_cv_path_MAGIC_CMD"; then - if test -n "$ac_tool_prefix"; then - echo "$as_me:$LINENO: checking for file" >&5 -echo $ECHO_N "checking for file... $ECHO_C" >&6 -if test "${lt_cv_path_MAGIC_CMD+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +fi +OTOOL=$ac_cv_prog_OTOOL +if test -n "$OTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5 +$as_echo "$OTOOL" >&6; } else - case $MAGIC_CMD in -[\\/*] | ?:[\\/]*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; -*) - lt_save_MAGIC_CMD="$MAGIC_CMD" - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" - for ac_dir in $ac_dummy; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/file; then - lt_cv_path_MAGIC_CMD="$ac_dir/file" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - $EGREP "$file_magic_regex" > /dev/null; then - : - else - cat <&2 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org -EOF - fi ;; - esac - fi - break - fi - done - IFS="$lt_save_ifs" - MAGIC_CMD="$lt_save_MAGIC_CMD" - ;; -esac fi +if test -z "$ac_cv_prog_OTOOL"; then + ac_ct_OTOOL=$OTOOL + # Extract the first word of "otool", so it can be a program name with args. +set dummy otool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_OTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OTOOL"; then + ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_OTOOL="otool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 -echo "${ECHO_T}$MAGIC_CMD" >&6 +fi +fi +ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL +if test -n "$ac_ct_OTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5 +$as_echo "$ac_ct_OTOOL" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi + if test "x$ac_ct_OTOOL" = x; then + OTOOL=":" else - MAGIC_CMD=: + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OTOOL=$ac_ct_OTOOL fi +else + OTOOL="$ac_cv_prog_OTOOL" fi + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. +set dummy ${ac_tool_prefix}otool64; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_OTOOL64+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$OTOOL64"; then + ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 fi - ;; -esac - -enable_dlopen=no -enable_win32_dll=no - -# Check whether --enable-libtool-lock or --disable-libtool-lock was given. -if test "${enable_libtool_lock+set}" = set; then - enableval="$enable_libtool_lock" +done + done +IFS=$as_save_IFS -fi; -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes +fi +fi +OTOOL64=$ac_cv_prog_OTOOL64 +if test -n "$OTOOL64"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5 +$as_echo "$OTOOL64" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi -# Check whether --with-pic or --without-pic was given. -if test "${with_pic+set}" = set; then - withval="$with_pic" - pic_mode="$withval" +fi +if test -z "$ac_cv_prog_OTOOL64"; then + ac_ct_OTOOL64=$OTOOL64 + # Extract the first word of "otool64", so it can be a program name with args. +set dummy otool64; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then : + $as_echo_n "(cached) " >&6 else - pic_mode=default -fi; -test -z "$pic_mode" && pic_mode=default + if test -n "$ac_ct_OTOOL64"; then + ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_OTOOL64="otool64" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS -# Check if we have a version mismatch between libtool.m4 and ltmain.sh. -# -# Note: This should be in AC_LIBTOOL_SETUP, _after_ $ltmain have been defined. -# We also should do it _before_ AC_LIBTOOL_LANG_C_CONFIG that actually -# calls AC_LIBTOOL_CONFIG and creates libtool. -# -echo "$as_me:$LINENO: checking for correct ltmain.sh version" >&5 -echo $ECHO_N "checking for correct ltmain.sh version... $ECHO_C" >&6 -if test -z "$ltmain"; then - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - echo - echo "*** Gentoo sanity check failed! ***" - echo "*** \$ltmain is not defined, please check the patch for consistency! ***" - echo - exit 1 fi -gentoo_lt_version="1.5.20" -gentoo_ltmain_version=`grep '^[:space:]*VERSION=' $ltmain | sed -e 's|^[:space:]*VERSION=||'` -if test "$gentoo_lt_version" != "$gentoo_ltmain_version"; then - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - echo - echo "*** Gentoo sanity check failed! ***" - echo "*** libtool.m4 and ltmain.sh have a version mismatch! ***" - echo "*** (libtool.m4 = $gentoo_lt_version, ltmain.sh = $gentoo_ltmain_version) ***" - echo - echo "Please run:" - echo - echo " libtoolize --copy --force" - echo - echo "if appropriate, please contact the maintainer of this" - echo "package (or your distribution) for help." - echo - exit 1 +fi +ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 +if test -n "$ac_ct_OTOOL64"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5 +$as_echo "$ac_ct_OTOOL64" >&6; } else - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_OTOOL64" = x; then + OTOOL64=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OTOOL64=$ac_ct_OTOOL64 + fi +else + OTOOL64="$ac_cv_prog_OTOOL64" fi -# Use C for the default configuration in the libtool script -tagname= -lt_save_CC="$CC" -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -# Source file extension for C test sources. -ac_ext=c -# Object file extension for compiled C test sources. -objext=o -objext=$objext -# Code to be used in simple compile tests -lt_simple_compile_test_code="int some_variable = 0;\n" -# Code to be used in simple link tests -lt_simple_link_test_code='int main(){return(0);}\n' -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} -# Allow CC to be a program name with arguments. -compiler=$CC -# save warnings/boilerplate of simple test code -ac_outfile=conftest.$ac_objext -printf "$lt_simple_compile_test_code" >conftest.$ac_ext -eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d' >conftest.err -_lt_compiler_boilerplate=`cat conftest.err` -$rm conftest* -ac_outfile=conftest.$ac_objext -printf "$lt_simple_link_test_code" >conftest.$ac_ext -eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d' >conftest.err -_lt_linker_boilerplate=`cat conftest.err` -$rm conftest* -# -# Check for any special shared library compilation flags. -# -lt_prog_cc_shlib= -if test "$GCC" = no; then - case $host_os in - sco3.2v5*) - lt_prog_cc_shlib='-belf' - ;; - esac -fi -if test -n "$lt_prog_cc_shlib"; then - { echo "$as_me:$LINENO: WARNING: \`$CC' requires \`$lt_prog_cc_shlib' to build shared libraries" >&5 -echo "$as_me: WARNING: \`$CC' requires \`$lt_prog_cc_shlib' to build shared libraries" >&2;} - if echo "$old_CC $old_CFLAGS " | grep "[ ]$lt_prog_cc_shlib[ ]" >/dev/null; then : - else - { echo "$as_me:$LINENO: WARNING: add \`$lt_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&5 -echo "$as_me: WARNING: add \`$lt_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&2;} - lt_cv_prog_cc_can_build_shared=no - fi -fi -# -# Check to make sure the static flag actually works. -# -echo "$as_me:$LINENO: checking if $compiler static flag $lt_prog_compiler_static works" >&5 -echo $ECHO_N "checking if $compiler static flag $lt_prog_compiler_static works... $ECHO_C" >&6 -if test "${lt_prog_compiler_static_works+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_prog_compiler_static_works=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS $lt_prog_compiler_static" - printf "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The linker can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&5 - $echo "X$_lt_linker_boilerplate" | $Xsed > conftest.exp - $SED '/^$/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - lt_prog_compiler_static_works=yes - fi - else - lt_prog_compiler_static_works=yes - fi - fi - $rm conftest* - LDFLAGS="$save_LDFLAGS" -fi -echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works" >&5 -echo "${ECHO_T}$lt_prog_compiler_static_works" >&6 -if test x"$lt_prog_compiler_static_works" = xyes; then - : -else - lt_prog_compiler_static= -fi -lt_prog_compiler_no_builtin_flag= -if test "$GCC" = yes; then - lt_prog_compiler_no_builtin_flag=' -fno-builtin' -echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 -echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6 -if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_cv_prog_compiler_rtti_exceptions=no - ac_outfile=conftest.$ac_objext - printf "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="-fno-rtti -fno-exceptions" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:6410: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 - echo "$as_me:6414: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $echo "X$_lt_compiler_boilerplate" | $Xsed >conftest.exp - $SED '/^$/d' conftest.err >conftest.er2 - if test ! -s conftest.err || diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_rtti_exceptions=yes - fi - fi - $rm conftest* + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5 +$as_echo_n "checking for -single_module linker flag... " >&6; } +if ${lt_cv_apple_cc_single_mod+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_apple_cc_single_mod=no + if test -z "${LT_MULTI_MODULE}"; then + # By default we will add the -single_module flag. You can override + # by either setting the environment variable LT_MULTI_MODULE + # non-empty at configure time, or by adding -multi_module to the + # link flags. + rm -rf libconftest.dylib* + echo "int foo(void){return 1;}" > conftest.c + echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ +-dynamiclib -Wl,-single_module conftest.c" >&5 + $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ + -dynamiclib -Wl,-single_module conftest.c 2>conftest.err + _lt_result=$? + # If there is a non-empty error log, and "single_module" + # appears in it, assume the flag caused a linker warning + if test -s conftest.err && $GREP single_module conftest.err; then + cat conftest.err >&5 + # Otherwise, if the output was created with a 0 exit code from + # the compiler, it worked. + elif test -f libconftest.dylib && test $_lt_result -eq 0; then + lt_cv_apple_cc_single_mod=yes + else + cat conftest.err >&5 + fi + rm -rf libconftest.dylib* + rm -f conftest.* + fi fi -echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 -echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5 +$as_echo "$lt_cv_apple_cc_single_mod" >&6; } -if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then - lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5 +$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; } +if ${lt_cv_ld_exported_symbols_list+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_ld_exported_symbols_list=no + save_LDFLAGS=$LDFLAGS + echo "_main" > conftest.sym + LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + lt_cv_ld_exported_symbols_list=yes else - : + lt_cv_ld_exported_symbols_list=no fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS="$save_LDFLAGS" + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5 +$as_echo "$lt_cv_ld_exported_symbols_list" >&6; } + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5 +$as_echo_n "checking for -force_load linker flag... " >&6; } +if ${lt_cv_ld_force_load+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_ld_force_load=no + cat > conftest.c << _LT_EOF +int forced_loaded() { return 2;} +_LT_EOF + echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5 + $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5 + echo "$AR cru libconftest.a conftest.o" >&5 + $AR cru libconftest.a conftest.o 2>&5 + echo "$RANLIB libconftest.a" >&5 + $RANLIB libconftest.a 2>&5 + cat > conftest.c << _LT_EOF +int main() { return 0;} +_LT_EOF + echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5 + $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err + _lt_result=$? + if test -s conftest.err && $GREP force_load conftest.err; then + cat conftest.err >&5 + elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then + lt_cv_ld_force_load=yes + else + cat conftest.err >&5 + fi + rm -f conftest.err libconftest.a conftest conftest.c + rm -rf conftest.dSYM fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5 +$as_echo "$lt_cv_ld_force_load" >&6; } + case $host_os in + rhapsody* | darwin1.[012]) + _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; + darwin1.*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + darwin*) # darwin 5.x on + # if running on 10.5 or later, the deployment target defaults + # to the OS version, if on x86, and 10.4, the deployment + # target defaults to 10.4. Don't you love it? + case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in + 10.0,*86*-darwin8*|10.0,*-darwin[91]*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + 10.[012]*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + 10.*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + esac + ;; + esac + if test "$lt_cv_apple_cc_single_mod" = "yes"; then + _lt_dar_single_mod='$single_module' + fi + if test "$lt_cv_ld_exported_symbols_list" = "yes"; then + _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' + else + _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' + fi + if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then + _lt_dsymutil='~$DSYMUTIL $lib || :' + else + _lt_dsymutil= + fi + ;; + esac -lt_prog_compiler_wl= -lt_prog_compiler_pic= -lt_prog_compiler_static= +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 +$as_echo_n "checking how to run the C preprocessor... " >&6; } +# On Suns, sometimes $CPP names a directory. +if test -n "$CPP" && test -d "$CPP"; then + CPP= +fi +if test -z "$CPP"; then + if ${ac_cv_prog_CPP+:} false; then : + $as_echo_n "(cached) " >&6 +else + # Double quotes because CPP needs to be expanded + for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" + do + ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : -echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 -echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 +else + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.i conftest.$ac_ext - if test "$GCC" = yes; then - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_static='-static' + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue +else + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.i conftest.$ac_ext - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static='-Bstatic' - fi - ;; +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : + break +fi - amigaos*) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' - ;; + done + ac_cv_prog_CPP=$CPP - beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; +fi + CPP=$ac_cv_prog_CPP +else + ac_cv_prog_CPP=$CPP +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 +$as_echo "$CPP" >&6; } +ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : - mingw* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_prog_compiler_pic='-DDLL_EXPORT' - ;; +else + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.i conftest.$ac_ext - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - lt_prog_compiler_pic='-fno-common' - ;; + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue +else + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.i conftest.$ac_ext - msdosdjgpp*) - # Just because we use GCC doesn't mean we suddenly get shared libraries - # on systems that don't support them. - lt_prog_compiler_can_build_shared=no - enable_shared=no - ;; +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : - sysv4*MP*) - if test -d /usr/nec; then - lt_prog_compiler_pic=-Kconform_pic - fi - ;; +else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details" "$LINENO" 5; } +fi - hpux*) - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic='-fPIC' - ;; - esac - ;; +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu - *) - lt_prog_compiler_pic='-fPIC' - ;; - esac - else - # PORTME Check for flag to pass linker flags through the system compiler. - case $host_os in - aix*) - lt_prog_compiler_wl='-Wl,' - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static='-Bstatic' - else - lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' - fi - ;; - darwin*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - case $cc_basename in - xlc*) - lt_prog_compiler_pic='-qnocommon' - lt_prog_compiler_wl='-Wl,' - ;; - esac - ;; - - mingw* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_prog_compiler_pic='-DDLL_EXPORT' - ;; - - hpux9* | hpux10* | hpux11*) - lt_prog_compiler_wl='-Wl,' - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic='+Z' - ;; - esac - # Is there a better lt_prog_compiler_static that works with the bundled CC? - lt_prog_compiler_static='${wl}-a ${wl}archive' - ;; - - irix5* | irix6* | nonstopux*) - lt_prog_compiler_wl='-Wl,' - # PIC (with -KPIC) is the default. - lt_prog_compiler_static='-non_shared' - ;; - - newsos6) - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; - - linux*) - case $cc_basename in - icc* | ecc*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-static' - ;; - pgcc* | pgf77* | pgf90* | pgf95*) - # Portland Group compilers (*not* the Pentium gcc compiler, - # which looks to be a dead project) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fpic' - lt_prog_compiler_static='-Bstatic' - ;; - ccc*) - lt_prog_compiler_wl='-Wl,' - # All Alpha code is PIC. - lt_prog_compiler_static='-non_shared' - ;; - esac - ;; - osf3* | osf4* | osf5*) - lt_prog_compiler_wl='-Wl,' - # All OSF/1 code is PIC. - lt_prog_compiler_static='-non_shared' - ;; +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 +$as_echo_n "checking for ANSI C header files... " >&6; } +if ${ac_cv_header_stdc+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#include +#include - sco3.2v5*) - lt_prog_compiler_pic='-Kpic' - lt_prog_compiler_static='-dn' - ;; +int +main () +{ - solaris*) - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - case $cc_basename in - f77* | f90* | f95*) - lt_prog_compiler_wl='-Qoption ld ';; - *) - lt_prog_compiler_wl='-Wl,';; - esac - ;; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_header_stdc=yes +else + ac_cv_header_stdc=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - sunos4*) - lt_prog_compiler_wl='-Qoption ld ' - lt_prog_compiler_pic='-PIC' - lt_prog_compiler_static='-Bstatic' - ;; +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include - sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "memchr" >/dev/null 2>&1; then : - sysv4*MP*) - if test -d /usr/nec ;then - lt_prog_compiler_pic='-Kconform_pic' - lt_prog_compiler_static='-Bstatic' - fi - ;; +else + ac_cv_header_stdc=no +fi +rm -f conftest* - unicos*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_can_build_shared=no - ;; +fi - uts4*) - lt_prog_compiler_pic='-pic' - lt_prog_compiler_static='-Bstatic' - ;; +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include - *) - lt_prog_compiler_can_build_shared=no - ;; - esac - fi +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "free" >/dev/null 2>&1; then : -echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5 -echo "${ECHO_T}$lt_prog_compiler_pic" >&6 +else + ac_cv_header_stdc=no +fi +rm -f conftest* -# -# Check to make sure the PIC flag actually works. -# -if test -n "$lt_prog_compiler_pic"; then +fi -echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 -echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6 -if test "${lt_prog_compiler_pic_works+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. + if test "$cross_compiling" = yes; then : + : else - lt_prog_compiler_pic_works=no - ac_outfile=conftest.$ac_objext - printf "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="$lt_prog_compiler_pic -DPIC" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:6672: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 - echo "$as_me:6676: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $echo "X$_lt_compiler_boilerplate" | $Xsed >conftest.exp - $SED '/^$/d' conftest.err >conftest.er2 - if test ! -s conftest.err || diff conftest.exp conftest.er2 >/dev/null; then - lt_prog_compiler_pic_works=yes - fi - fi - $rm conftest* + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#if ((' ' & 0x0FF) == 0x020) +# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#else +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) +# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +#endif -fi -echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works" >&5 -echo "${ECHO_T}$lt_prog_compiler_pic_works" >&6 +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int +main () +{ + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + return 2; + return 0; +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : -if test x"$lt_prog_compiler_pic_works" = xyes; then - case $lt_prog_compiler_pic in - "" | " "*) ;; - *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; - esac else - lt_prog_compiler_pic= - lt_prog_compiler_can_build_shared=no + ac_cv_header_stdc=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext fi fi -case $host_os in - # For platforms which do not support PIC, -DPIC is meaningless: - *djgpp*) - lt_prog_compiler_pic= - ;; - *) - lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" - ;; -esac +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 +$as_echo "$ac_cv_header_stdc" >&6; } +if test $ac_cv_header_stdc = yes; then -echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 -echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 -if test "${lt_cv_prog_compiler_c_o+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_cv_prog_compiler_c_o=no - $rm -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - printf "$lt_simple_compile_test_code" > conftest.$ac_ext +$as_echo "#define STDC_HEADERS 1" >>confdefs.h - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:6734: $lt_compile\"" >&5) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&5 - echo "$as_me:6738: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $echo "X$_lt_compiler_boilerplate" | $Xsed > out/conftest.exp - $SED '/^$/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.err || diff out/conftest.exp out/conftest.er2 >/dev/null; then - lt_cv_prog_compiler_c_o=yes - fi - fi - chmod u+w . 2>&5 - $rm conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files - $rm out/* && rmdir out - cd .. - rmdir conftest - $rm conftest* +fi + +# On IRIX 5.3, sys/types and inttypes.h are conflicting. +for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ + inttypes.h stdint.h unistd.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default +" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF fi -echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 -echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6 +done -hard_links="nottested" -if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 -echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6 - hard_links=yes - $rm conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - echo "$as_me:$LINENO: result: $hard_links" >&5 -echo "${ECHO_T}$hard_links" >&6 - if test "$hard_links" = no; then - { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 -echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} - need_locks=warn - fi -else - need_locks=no -fi -echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 -echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 +for ac_header in dlfcn.h +do : + ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default +" +if test "x$ac_cv_header_dlfcn_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_DLFCN_H 1 +_ACEOF + +fi - runpath_var= - allow_undefined_flag= - enable_shared_with_static_runtimes=no - archive_cmds= - archive_expsym_cmds= - old_archive_From_new_cmds= - old_archive_from_expsyms_cmds= - export_dynamic_flag_spec= - whole_archive_flag_spec= - thread_safe_flag_spec= - hardcode_libdir_flag_spec= - hardcode_libdir_flag_spec_ld= - hardcode_libdir_separator= - hardcode_direct=no - hardcode_minus_L=no - hardcode_shlibpath_var=unsupported - link_all_deplibs=unknown - hardcode_automatic=no - module_cmds= - module_expsym_cmds= - always_export_symbols=no - export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - # include_expsyms should be a list of space-separated symbols to be *always* - # included in the symbol list - include_expsyms= - # exclude_expsyms can be an extended regexp of symbols to exclude - # it will be wrapped by ` (' and `)$', so one must not match beginning or - # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', - # as well as any symbol that contains `d'. - exclude_expsyms="_GLOBAL_OFFSET_TABLE_" - # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out - # platforms (ab)use it in PIC code, but their linkers get confused if - # the symbol is explicitly referenced. Since portable code cannot - # rely on this symbol name, it's probably fine to never include it in - # preloaded symbol tables. - extract_expsyms_cmds= - # Just being paranoid about ensuring that cc_basename is set. - for cc_temp in $compiler""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac done -cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` - case $host_os in - cygwin* | mingw* | pw32*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no - fi - ;; - openbsd*) - with_gnu_ld=no - ;; + + + +func_stripname_cnf () +{ + case ${2} in + .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; + *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; esac +} # func_stripname_cnf - ld_shlibs=yes - if test "$with_gnu_ld" = yes; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' - # Set some defaults for GNU ld with shared library support. These - # are reset later if shared libraries are not supported. Putting them - # here allows them to be overridden if necessary. - runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' - export_dynamic_flag_spec='${wl}--export-dynamic' - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - whole_archive_flag_spec= - fi - supports_anon_versioning=no - case `$LD -v 2>/dev/null` in - *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 - *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... - *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... - *\ 2.11.*) ;; # other 2.11 versions - *) supports_anon_versioning=yes ;; - esac - # See if GNU ld supports shared libraries. - case $host_os in - aix3* | aix4* | aix5*) - # On AIX/PPC, the GNU linker is very broken - if test "$host_cpu" != ia64; then - ld_shlibs=no - cat <&2 -*** Warning: the GNU linker, at least up to release 2.9.1, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to modify your PATH -*** so that a non-GNU linker is found, and then restart. -EOF - fi - ;; +# Set options - amigaos*) - archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - # Samuel A. Falvo II reports - # that the semantics of dynamic libraries on AmigaOS, at least up - # to version 4, is to share data among multiple programs linked - # with the same dynamic library. Since this doesn't match the - # behavior of shared libraries on other platforms, we can't use - # them. - ld_shlibs=no - ;; - beos*) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - allow_undefined_flag=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - ld_shlibs=no - fi - ;; + enable_dlopen=no - cygwin* | mingw* | pw32*) - # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, - # as there is no search path for DLLs. - hardcode_libdir_flag_spec='-L$libdir' - allow_undefined_flag=unsupported - always_export_symbols=no - enable_shared_with_static_runtimes=yes - export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' - if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' - else - ld_shlibs=no - fi - ;; + enable_win32_dll=no - linux*) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - tmp_addflag= - case $cc_basename,$host_cpu in - pgcc*) # Portland Group C compiler - whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag' - ;; - pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers - whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag -Mnomain' ;; - ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 - tmp_addflag=' -i_dynamic' ;; - efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 - tmp_addflag=' -i_dynamic -nofor_main' ;; - ifc* | ifort*) # Intel Fortran compiler - tmp_addflag=' -nofor_main' ;; - esac - archive_cmds='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - if test $supports_anon_versioning = yes; then - archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - $echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + # Check whether --enable-shared was given. +if test "${enable_shared+set}" = set; then : + enableval=$enable_shared; p=${PACKAGE-default} + case $enableval in + yes) enable_shared=yes ;; + no) enable_shared=no ;; + *) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_shared=yes fi - else - ld_shlibs=no - fi + done + IFS="$lt_save_ifs" ;; + esac +else + enable_shared=yes +fi + + + - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; - solaris* | sysv5*) - if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then - ld_shlibs=no - cat <&2 -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. -EOF - elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - sunos4*) - archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' - wlarc= - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; + # Check whether --enable-static was given. +if test "${enable_static+set}" = set; then : + enableval=$enable_static; p=${PACKAGE-default} + case $enableval in + yes) enable_static=yes ;; + no) enable_static=no ;; *) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi + enable_static=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS="$lt_save_ifs" ;; esac +else + enable_static=yes +fi - if test "$ld_shlibs" = no; then - runpath_var= - hardcode_libdir_flag_spec= - export_dynamic_flag_spec= - whole_archive_flag_spec= - fi - else - # PORTME fill in a description of your system's linker (not GNU ld) - case $host_os in - aix3*) - allow_undefined_flag=unsupported - always_export_symbols=yes - archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - hardcode_minus_L=yes - if test "$GCC" = yes && test -z "$link_static_flag"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - hardcode_direct=unsupported - fi - ;; - aix4* | aix5*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - if $NM -V 2>&1 | grep 'GNU' > /dev/null; then - export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' - else - export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' - fi - aix_use_runtimelinking=no - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[23]|aix4.[23].*|aix5*) - for ld_flag in $LDFLAGS; do - if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then - aix_use_runtimelinking=yes - break - fi - done - esac - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - archive_cmds='' - hardcode_direct=yes - hardcode_libdir_separator=':' - link_all_deplibs=yes - - if test "$GCC" = yes; then - case $host_os in aix4.[012]|aix4.[012].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - hardcode_direct=yes - else - # We have old collect2 - hardcode_direct=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - hardcode_minus_L=yes - hardcode_libdir_flag_spec='-L$libdir' - hardcode_libdir_separator= - fi - esac - shared_flag='-shared' - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' - fi - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' - else - shared_flag='${wl}-bM:SRE' - fi - fi - fi - # It seems that -bexpall does not export symbols beginning with - # underscore (_), so it is better to generate a list of symbols to export. - always_export_symbols=yes - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - allow_undefined_flag='-berok' - # Determine the default libpath from the value encoded in an empty executable. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -int -main () -{ - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'`; fi +# Check whether --with-pic was given. +if test "${with_pic+set}" = set; then : + withval=$with_pic; lt_p=${PACKAGE-default} + case $withval in + yes|no) pic_mode=$withval ;; + *) + pic_mode=default + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for lt_pkg in $withval; do + IFS="$lt_save_ifs" + if test "X$lt_pkg" = "X$lt_p"; then + pic_mode=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - + pic_mode=default fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" - archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' - allow_undefined_flag="-z nodefs" - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an empty executable. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -int -main () -{ +test -z "$pic_mode" && pic_mode=default - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'`; fi -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - no_undefined_flag=' ${wl}-bernotok' - allow_undefined_flag=' ${wl}-berok' - # -bexpall does not export symbols beginning with underscore (_) - always_export_symbols=yes - # Exported symbols can be pulled into shared objects from archives - whole_archive_flag_spec=' ' - archive_cmds_need_lc=yes - # This is similar to how AIX traditionally builds its shared libraries. - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + + + + # Check whether --enable-fast-install was given. +if test "${enable_fast_install+set}" = set; then : + enableval=$enable_fast_install; p=${PACKAGE-default} + case $enableval in + yes) enable_fast_install=yes ;; + no) enable_fast_install=no ;; + *) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_fast_install=yes fi - fi + done + IFS="$lt_save_ifs" ;; + esac +else + enable_fast_install=yes +fi - amigaos*) - archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - # see comment about different semantics on the GNU ld section - ld_shlibs=no - ;; - bsdi[45]*) - export_dynamic_flag_spec=-rdynamic - ;; - cygwin* | mingw* | pw32*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec=' ' - allow_undefined_flag=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - old_archive_From_new_cmds='true' - # FIXME: Should let the user specify the lib program. - old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs' - fix_srcfile_path='`cygpath -w "$srcfile"`' - enable_shared_with_static_runtimes=yes - ;; - darwin* | rhapsody*) - case $host_os in - rhapsody* | darwin1.[012]) - allow_undefined_flag='${wl}-undefined ${wl}suppress' - ;; - *) # Darwin 1.3 on - if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then - allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' - else - case ${MACOSX_DEPLOYMENT_TARGET} in - 10.[012]) - allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' - ;; - 10.*) - allow_undefined_flag='${wl}-undefined ${wl}dynamic_lookup' - ;; - esac - fi - ;; - esac - archive_cmds_need_lc=no - hardcode_direct=no - hardcode_automatic=yes - hardcode_shlibpath_var=unsupported - whole_archive_flag_spec='' - link_all_deplibs=yes - if test "$GCC" = yes ; then - output_verbose_link_cmd='echo' - archive_cmds='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' - module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds - archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - else - case $cc_basename in - xlc*) - output_verbose_link_cmd='echo' - archive_cmds='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' - module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds - archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - ;; - *) - ld_shlibs=no - ;; - esac - fi - ;; - dgux*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; - freebsd1*) - ld_shlibs=no - ;; - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd* | kfreebsd*-gnu | dragonfly*) - archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - hpux9*) - if test "$GCC" = yes; then - archive_cmds='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - else - archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - fi - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - export_dynamic_flag_spec='${wl}-E' - ;; +# This can be used to rebuild libtool when needed +LIBTOOL_DEPS="$ltmain" - hpux10* | hpux11*) - if test "$GCC" = yes -a "$with_gnu_ld" = no; then - case $host_cpu in - hppa*64*|ia64*) - archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - else - case $host_cpu in - hppa*64*|ia64*) - archive_cmds='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags' - ;; - *) - archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' - ;; - esac - fi - if test "$with_gnu_ld" = no; then - case $host_cpu in - hppa*64*) - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_flag_spec_ld='+b $libdir' - hardcode_libdir_separator=: - hardcode_direct=no - hardcode_shlibpath_var=no - ;; - ia64*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_direct=no - hardcode_shlibpath_var=no +# Always use our own libtool. +LIBTOOL='$(SHELL) $(top_builddir)/libtool' - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - ;; - *) - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - export_dynamic_flag_spec='${wl}-E' - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - ;; - esac - fi - ;; - irix5* | irix6* | nonstopux*) - if test "$GCC" = yes; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec_ld='-rpath $libdir' - fi - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - link_all_deplibs=yes - ;; - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else - archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF - fi - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - newsos6) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_shlibpath_var=no - ;; - openbsd*) - hardcode_direct=yes - hardcode_shlibpath_var=no - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - export_dynamic_flag_spec='${wl}-E' - else - case $host_os in - openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-R$libdir' - ;; - *) - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - ;; - esac - fi - ;; - os2*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - allow_undefined_flag=unsupported - archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - old_archive_From_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' - ;; - osf3*) - if test "$GCC" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - fi - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - ;; - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ - $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' - # Both c and cxx compiler support -rpath directly - hardcode_libdir_flag_spec='-rpath $libdir' - fi - hardcode_libdir_separator=: - ;; - sco3.2v5*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - export_dynamic_flag_spec='${wl}-Bexport' - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - ;; - solaris*) - no_undefined_flag=' -z text' - if test "$GCC" = yes; then - wlarc='${wl}' - archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' - else - wlarc='' - archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - fi - hardcode_libdir_flag_spec='-R$libdir' - hardcode_shlibpath_var=no - case $host_os in - solaris2.[0-5] | solaris2.[0-5].*) ;; - *) - # The compiler driver will combine linker options so we - # cannot just pass the convience library names through - # without $wl, iff we do not link with $LD. - # Luckily, gcc supports the same syntax we need for Sun Studio. - # Supported since Solaris 2.6 (maybe 2.5.1?) - case $wlarc in - '') - whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;; - *) - whole_archive_flag_spec='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;; - esac ;; - esac - link_all_deplibs=yes - ;; - sunos4*) - if test "x$host_vendor" = xsequent; then - # Use $CC to link under sequent, because it throws in some extra .o - # files that make .init and .fini sections work. - archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' - fi - hardcode_libdir_flag_spec='-L$libdir' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - sysv4) - case $host_vendor in - sni) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes # is this really true??? - ;; - siemens) - ## LD is ld it makes a PLAMLIB - ## CC just makes a GrossModule. - archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' - reload_cmds='$CC -r -o $output$reload_objs' - hardcode_direct=no - ;; - motorola) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=no #Motorola manual says yes, but my tests say they lie - ;; - esac - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var=no - ;; - sysv4.3*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - export_dynamic_flag_spec='-Bexport' - ;; - sysv4*MP*) - if test -d /usr/nec; then - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - ld_shlibs=yes - fi - ;; - sysv4.2uw2*) - archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_minus_L=no - hardcode_shlibpath_var=no - hardcode_runpath_var=yes - runpath_var=LD_RUN_PATH - ;; - sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*) - no_undefined_flag='${wl}-z ${wl}text' - if test "$GCC" = yes; then - archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var=no - ;; - sysv5*) - no_undefined_flag=' -z text' - # $CC -shared without GNU ld will not create a library from C++ - # object files and a static libstdc++, better avoid it by now - archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - hardcode_libdir_flag_spec= - hardcode_shlibpath_var=no - runpath_var='LD_RUN_PATH' - ;; - uts4*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; - *) - ld_shlibs=no - ;; - esac - fi -echo "$as_me:$LINENO: result: $ld_shlibs" >&5 -echo "${ECHO_T}$ld_shlibs" >&6 -test "$ld_shlibs" = no && can_build_shared=no -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi -# -# Do we need to explicitly link libc? -# -case "x$archive_cmds_need_lc" in -x|xyes) - # Assume -lc should be added - archive_cmds_need_lc=yes - if test "$enable_shared" = yes && test "$GCC" = yes; then - case $archive_cmds in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 -echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6 - $rm conftest* - printf "$lt_simple_compile_test_code" > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$lt_prog_compiler_wl - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$allow_undefined_flag - allow_undefined_flag= - if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 - (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } - then - archive_cmds_need_lc=no - else - archive_cmds_need_lc=yes - fi - allow_undefined_flag=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $rm conftest* - echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5 -echo "${ECHO_T}$archive_cmds_need_lc" >&6 - ;; - esac - fi - ;; -esac -echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 -echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6 -library_names_spec= -libname_spec='lib$name' -soname_spec= -shrext_cmds=".so" -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -if test "$GCC" = yes; then - sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` - if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then - # if the path contains ";" then we assume it to be the separator - # otherwise default to the standard path separator (i.e. ":") - it is - # assumed that no part of a normal pathname contains ";" but that should - # okay in the real world where ";" in dirpaths is itself problematic. - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi -else - sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" -fi -need_lib_prefix=unknown -hardcode_into_libs=no -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -need_version=unknown -case $host_os in -aix3*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' - shlibpath_var=LIBPATH - # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}${shared_ext}$major' - ;; +test -z "$LN_S" && LN_S="ln -s" -aix4* | aix5*) - version_type=linux - need_lib_prefix=no - need_version=no - hardcode_into_libs=yes - if test "$host_cpu" = ia64; then - # AIX 5 supports IA64 - library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[01] | aix4.[01].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # AIX (on Power*) has no versioning support, so currently we can not hardcode correct - # soname into executable. Probably we can add versioning support to - # collect2, so additional links can be useful in future. - if test "$aix_use_runtimelinking" = yes; then - # If using run time linking (on AIX 4.2 or later) use lib.so - # instead of lib.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - else - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}${shared_ext}$major' - fi - shlibpath_var=LIBPATH - fi - ;; -amigaos*) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' - ;; -beos*) - library_names_spec='${libname}${shared_ext}' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; -bsdi[45]*) - version_type=linux - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; -cygwin* | mingw* | pw32*) - version_type=windows - shrext_cmds=".dll" - need_version=no - need_lib_prefix=no - case $GCC,$host_os in - yes,cygwin* | yes,mingw* | yes,pw32*) - library_names_spec='$libname.dll.a' - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname~ - chmod a+x \$dldir/$dlname' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $rm \$dlpath' - shlibpath_overrides_runpath=yes - case $host_os in - cygwin*) - # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" - ;; - mingw*) - # MinGW DLLs use traditional 'lib' prefix - soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` - if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then - # It is most probably a Windows format PATH printed by - # mingw gcc, but we are running on Cygwin. Gcc prints its search - # path with ; separators, and with drive letters. We can handle the - # drive letters (cygwin fileutils understands them), so leave them, - # especially as we might pass files found there to a mingw objdump, - # which wouldn't understand a cygwinified path. Ahh. - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi - ;; - pw32*) - # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - ;; - esac - ;; - linux*) - if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - supports_anon_versioning=no - case `$LD -v 2>/dev/null` in - *\ 01.* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 - *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... - *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... - *\ 2.11.*) ;; # other 2.11 versions - *) supports_anon_versioning=yes ;; - esac - if test $supports_anon_versioning = yes; then - archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~ -cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ -$echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' - else - $archive_expsym_cmds="$archive_cmds" - fi - else - ld_shlibs=no - fi - ;; - *) - library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' - ;; - esac - dynamic_linker='Win32 ld.exe' - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' - soname_spec='${libname}${release}${major}$shared_ext' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' - # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. - if test "$GCC" = yes; then - sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` - else - sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' - fi - sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' - ;; -dgux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; -freebsd1*) - dynamic_linker=no - ;; -kfreebsd*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='GNU ld.so' - ;; -freebsd* | dragonfly*) - # DragonFly does not have aout. When/if they implement a new - # versioning mechanism, adjust this. - if test -x /usr/bin/objformat; then - objformat=`/usr/bin/objformat` - else - case $host_os in - freebsd[123]*) objformat=aout ;; - *) objformat=elf ;; - esac - fi - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in - freebsd2*) - shlibpath_overrides_runpath=yes - ;; - freebsd3.[01]* | freebsdelf3.[01]*) - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - *) # from 3.2 on - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - esac - ;; +if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST +fi -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5 +$as_echo_n "checking for objdir... " >&6; } +if ${lt_cv_objdir+:} false; then : + $as_echo_n "(cached) " >&6 +else + rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + lt_cv_objdir=.libs +else + # MS-DOS does not allow filenames that begin with a dot. + lt_cv_objdir=_libs +fi +rmdir .libs 2>/dev/null +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5 +$as_echo "$lt_cv_objdir" >&6; } +objdir=$lt_cv_objdir -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - version_type=sunos - need_lib_prefix=no - need_version=no - case $host_cpu in - ia64*) - shrext_cmds='.so' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.so" - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - if test "X$HPUX_IA64_MODE" = X32; then - sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" - else - sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" - fi - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - hppa*64*) - shrext_cmds='.sl' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.sl" - shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - *) - shrext_cmds='.sl' - dynamic_linker="$host_os dld.sl" - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - ;; - esac - # HP-UX runs *really* slowly unless shared libraries are mode 555. - postinstall_cmds='chmod 555 $lib' - ;; -irix5* | irix6* | nonstopux*) - case $host_os in - nonstopux*) version_type=nonstopux ;; - *) - if test "$lt_cv_prog_gnu_ld" = yes; then - version_type=linux - else - version_type=irix - fi ;; - esac - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' - case $host_os in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") - libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") - libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") - libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" - hardcode_into_libs=yes - ;; -# No shared lib support for Linux oldld, aout, or coff. -linux*oldld* | linux*aout* | linux*coff*) - dynamic_linker=no - ;; -# This must be Linux ELF. -linux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - # Append ld.so.conf contents to the search path - if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` - sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" - fi +cat >>confdefs.h <<_ACEOF +#define LT_OBJDIR "$lt_cv_objdir/" +_ACEOF - case $host_cpu:$lt_cv_cc_64bit_output in - powerpc64:yes | s390x:yes | sparc64:yes | x86_64:yes) - sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /usr/X11R6/lib64" - sys_lib_search_path_spec="/lib64 /usr/lib64 /usr/local/lib64 /usr/X11R6/lib64" - ;; - esac - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' - # Find out which ABI we are using (multilib Linux x86_64 hack). - libsuff= - case "$host_cpu" in - x86_64*) - echo '#line 8173 "configure"' > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - case `/usr/bin/file conftest.$ac_objext` in - *64-bit*) - libsuff=64 - ;; - esac - fi - rm -rf conftest* - ;; - *) - ;; - esac - sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}" - sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" - ;; -knetbsd*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='GNU ld.so' +case $host_os in +aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES + fi ;; +esac -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - -newsos6) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -nto-qnx*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -openbsd*) - version_type=sunos - need_lib_prefix=no - # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. - case $host_os in - openbsd3.3 | openbsd3.3.*) need_version=yes ;; - *) need_version=no ;; - esac - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case $host_os in - openbsd2.[89] | openbsd2.[89].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac - else - shlibpath_overrides_runpath=yes - fi - ;; - -os2*) - libname_spec='$name' - shrext_cmds=".dll" - need_lib_prefix=no - library_names_spec='$libname${shared_ext} $libname.a' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH - ;; +# Global variables: +ofile=libtool +can_build_shared=yes -osf3* | osf4* | osf5*) - version_type=osf - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" - ;; +# All known linkers require a `.a' archive for static linking (except MSVC, +# which needs '.lib'). +libext=a -sco3.2v5*) - version_type=osf - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - ;; +with_gnu_ld="$lt_cv_prog_gnu_ld" -solaris*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; +old_CC="$CC" +old_CFLAGS="$CFLAGS" -sunos4*) - version_type=sunos - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no - fi - need_version=yes - ;; +# Set sane defaults for various variables +test -z "$CC" && CC=cc +test -z "$LTCC" && LTCC=$CC +test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS +test -z "$LD" && LD=ld +test -z "$ac_objext" && ac_objext=o -sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - need_lib_prefix=no - export_dynamic_flag_spec='${wl}-Blargedynsym' - runpath_var=LD_RUN_PATH - ;; - siemens) - need_lib_prefix=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; +for cc_temp in $compiler""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; esac - ;; +done +cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` -sysv4*MP*) - if test -d /usr/nec ;then - version_type=linux - library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' - soname_spec='$libname${shared_ext}.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; -uts4*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH +# Only perform the check for file, if the check method requires it +test -z "$MAGIC_CMD" && MAGIC_CMD=file +case $deplibs_check_method in +file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5 +$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; } +if ${lt_cv_path_MAGIC_CMD+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $MAGIC_CMD in +[\\/*] | ?:[\\/]*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ;; - *) - dynamic_linker=no - ;; -esac -echo "$as_me:$LINENO: result: $dynamic_linker" >&5 -echo "${ECHO_T}$dynamic_linker" >&6 -test "$dynamic_linker" = no && can_build_shared=no - -echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 -echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 -hardcode_action= -if test -n "$hardcode_libdir_flag_spec" || \ - test -n "$runpath_var" || \ - test "X$hardcode_automatic" = "Xyes" ; then + lt_save_MAGIC_CMD="$MAGIC_CMD" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/${ac_tool_prefix}file; then + lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <<_LT_EOF 1>&2 - # We can hardcode non-existant directories. - if test "$hardcode_direct" != no && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, )" != no && - test "$hardcode_minus_L" != no; then - # Linking always hardcodes the temporary library directory. - hardcode_action=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - hardcode_action=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - hardcode_action=unsupported -fi -echo "$as_me:$LINENO: result: $hardcode_action" >&5 -echo "${ECHO_T}$hardcode_action" >&6 +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org -if test "$hardcode_action" = relink; then - # Fast installation is not supported - enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then - # Fast installation is not necessary - enable_fast_install=needless +_LT_EOF + fi ;; + esac + fi + break + fi + done + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" + ;; +esac fi -striplib= -old_striplib= -echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 -echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6 -if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 +$as_echo "$MAGIC_CMD" >&6; } else -# FIXME - insert some real tests, host_os isn't really good enough - case $host_os in - darwin*) - if test -n "$STRIP" ; then - striplib="$STRIP -x" - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - ;; - *) - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - ;; - esac + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi -if test "x$enable_dlopen" != xyes; then - enable_dlopen=unknown - enable_dlopen_self=unknown - enable_dlopen_self_static=unknown -else - lt_cv_dlopen=no - lt_cv_dlopen_libs= - case $host_os in - beos*) - lt_cv_dlopen="load_add_on" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ;; - mingw* | pw32*) - lt_cv_dlopen="LoadLibrary" - lt_cv_dlopen_libs= - ;; - cygwin*) - lt_cv_dlopen="dlopen" - lt_cv_dlopen_libs= - ;; - darwin*) - # if libdl is installed we need to link against it - echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 -echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 -if test "${ac_cv_lib_dl_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5 +$as_echo_n "checking for file... " >&6; } +if ${lt_cv_path_MAGIC_CMD+:} false; then : + $as_echo_n "(cached) " >&6 else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldl $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ + case $MAGIC_CMD in +[\\/*] | ?:[\\/]*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD="$MAGIC_CMD" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/file; then + lt_cv_path_MAGIC_CMD="$ac_dir/file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <<_LT_EOF 1>&2 -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dlopen (); -int -main () -{ -dlopen (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_dl_dlopen=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org -ac_cv_lib_dl_dlopen=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS +_LT_EOF + fi ;; + esac + fi + break + fi + done + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" + ;; +esac fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 -echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 -if test $ac_cv_lib_dl_dlopen = yes; then - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" + +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 +$as_echo "$MAGIC_CMD" >&6; } else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi - lt_cv_dlopen="dyld" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes + else + MAGIC_CMD=: + fi fi - ;; + fi + ;; +esac - *) - echo "$as_me:$LINENO: checking for shl_load" >&5 -echo $ECHO_N "checking for shl_load... $ECHO_C" >&6 -if test "${ac_cv_func_shl_load+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define shl_load to an innocuous variant, in case declares shl_load. - For example, HP-UX 11i declares gettimeofday. */ -#define shl_load innocuous_shl_load +# Use C for the default configuration in the libtool script -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char shl_load (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ +lt_save_CC="$CC" +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu -#ifdef __STDC__ -# include -#else -# include -#endif -#undef shl_load +# Source file extension for C test sources. +ac_ext=c -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -{ -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char shl_load (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_shl_load) || defined (__stub___shl_load) -choke me -#else -char (*f) () = shl_load; -#endif -#ifdef __cplusplus -} -#endif +# Object file extension for compiled C test sources. +objext=o +objext=$objext -int -main () -{ -return f != shl_load; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_shl_load=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;" -ac_cv_func_shl_load=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 -echo "${ECHO_T}$ac_cv_func_shl_load" >&6 -if test $ac_cv_func_shl_load = yes; then - lt_cv_dlopen="shl_load" -else - echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 -echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6 -if test "${ac_cv_lib_dld_shl_load+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +# Code to be used in simple link tests +lt_simple_link_test_code='int main(){return(0);}' -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char shl_load (); -int -main () -{ -shl_load (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_dld_shl_load=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_lib_dld_shl_load=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 -echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6 -if test $ac_cv_lib_dld_shl_load = yes; then - lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld" -else - echo "$as_me:$LINENO: checking for dlopen" >&5 -echo $ECHO_N "checking for dlopen... $ECHO_C" >&6 -if test "${ac_cv_func_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define dlopen to an innocuous variant, in case declares dlopen. - For example, HP-UX 11i declares gettimeofday. */ -#define dlopen innocuous_dlopen -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char dlopen (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ -#ifdef __STDC__ -# include -#else -# include -#endif -#undef dlopen -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -{ -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dlopen (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_dlopen) || defined (__stub___dlopen) -choke me -#else -char (*f) () = dlopen; -#endif -#ifdef __cplusplus -} -#endif -int -main () -{ -return f != dlopen; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_dlopen=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} -ac_cv_func_dlopen=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 -echo "${ECHO_T}$ac_cv_func_dlopen" >&6 -if test $ac_cv_func_dlopen = yes; then - lt_cv_dlopen="dlopen" -else - echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 -echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 -if test "${ac_cv_lib_dl_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldl $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dlopen (); -int -main () -{ -dlopen (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_dl_dlopen=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +# Allow CC to be a program name with arguments. +compiler=$CC -ac_cv_lib_dl_dlopen=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 -echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 -if test $ac_cv_lib_dl_dlopen = yes; then - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" -else - echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 -echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6 -if test "${ac_cv_lib_svld_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lsvld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +# Save the default compiler, since it gets overwritten when the other +# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. +compiler_DEFAULT=$CC -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dlopen (); -int -main () -{ -dlopen (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_svld_dlopen=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_svld_dlopen=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 -echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6 -if test $ac_cv_lib_svld_dlopen = yes; then - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" -else - echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 -echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6 -if test "${ac_cv_lib_dld_dld_link+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dld_link (); -int -main () -{ -dld_link (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_dld_dld_link=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +# save warnings/boilerplate of simple test code +ac_outfile=conftest.$ac_objext +echo "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$RM conftest* -ac_cv_lib_dld_dld_link=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 -echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6 -if test $ac_cv_lib_dld_dld_link = yes; then - lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld" -fi +ac_outfile=conftest.$ac_objext +echo "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$RM -r conftest* -fi +if test -n "$compiler"; then +lt_prog_compiler_no_builtin_flag= -fi +if test "$GCC" = yes; then + case $cc_basename in + nvcc*) + lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;; + *) + lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;; + esac + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 +$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } +if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_rtti_exceptions=no + ac_outfile=conftest.$ac_objext + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="-fno-rtti -fno-exceptions" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_rtti_exceptions=yes + fi + fi + $RM conftest* fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 +$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } - +if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then + lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" +else + : fi - fi - ;; - esac - if test "x$lt_cv_dlopen" != xno; then - enable_dlopen=yes - else - enable_dlopen=no - fi - case $lt_cv_dlopen in - dlopen) - save_CPPFLAGS="$CPPFLAGS" - test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - save_LDFLAGS="$LDFLAGS" - eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - save_LIBS="$LIBS" - LIBS="$lt_cv_dlopen_libs $LIBS" - echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 -echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6 -if test "${lt_cv_dlopen_self+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test "$cross_compiling" = yes; then : - lt_cv_dlopen_self=cross -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext < -#endif -#include + if test "$GCC" = yes; then + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_static='-static' -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static='-Bstatic' + fi + ;; -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + lt_prog_compiler_pic='-fPIC' + ;; + m68k) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' + ;; + esac + ;; -#ifdef __cplusplus -extern "C" void exit (int); -#endif + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; -void fnord() { int i=42;} -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + # Although the cygwin gcc ignores -fPIC, still need this for old-style + # (--disable-auto-import) libraries + lt_prog_compiler_pic='-DDLL_EXPORT' + ;; - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - /* dlclose (self); */ - } + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_prog_compiler_pic='-fno-common' + ;; - exit (status); -} -EOF - if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) >&5 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; - x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; - x$lt_unknown|x*) lt_cv_dlopen_self=no ;; - esac - else : - # compilation failed - lt_cv_dlopen_self=no - fi -fi -rm -fr conftest* + haiku*) + # PIC is the default for Haiku. + # The "-static" flag exists, but is broken. + lt_prog_compiler_static= + ;; + hpux*) + # PIC is the default for 64-bit PA HP-UX, but not for 32-bit + # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag + # sets the default TLS model and affects inlining. + case $host_cpu in + hppa*64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic='-fPIC' + ;; + esac + ;; -fi -echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 -echo "${ECHO_T}$lt_cv_dlopen_self" >&6 + interix[3-9]*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; - if test "x$lt_cv_dlopen_self" = xyes; then - LDFLAGS="$LDFLAGS $link_static_flag" - echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 -echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6 -if test "${lt_cv_dlopen_self_static+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test "$cross_compiling" = yes; then : - lt_cv_dlopen_self_static=cross -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext < -#endif + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + lt_prog_compiler_pic='-fPIC -shared' + ;; -#include + sysv4*MP*) + if test -d /usr/nec; then + lt_prog_compiler_pic=-Kconform_pic + fi + ;; -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif + *) + lt_prog_compiler_pic='-fPIC' + ;; + esac -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif + case $cc_basename in + nvcc*) # Cuda Compiler Driver 2.2 + lt_prog_compiler_wl='-Xlinker ' + if test -n "$lt_prog_compiler_pic"; then + lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic" + fi + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + lt_prog_compiler_wl='-Wl,' + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static='-Bstatic' + else + lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' + fi + ;; -#ifdef __cplusplus -extern "C" void exit (int); -#endif + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_prog_compiler_pic='-DDLL_EXPORT' + ;; -void fnord() { int i=42;} -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; + hpux9* | hpux10* | hpux11*) + lt_prog_compiler_wl='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + lt_prog_compiler_static='${wl}-a ${wl}archive' + ;; - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - /* dlclose (self); */ - } + irix5* | irix6* | nonstopux*) + lt_prog_compiler_wl='-Wl,' + # PIC (with -KPIC) is the default. + lt_prog_compiler_static='-non_shared' + ;; - exit (status); -} -EOF - if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) >&5 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;; - esac - else : - # compilation failed - lt_cv_dlopen_self_static=no - fi -fi -rm -fr conftest* + linux* | k*bsd*-gnu | kopensolaris*-gnu) + case $cc_basename in + # old Intel for x86_64 which still supported -KPIC. + ecc*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-static' + ;; + # icc used to be incompatible with GCC. + # ICC 10 doesn't accept -KPIC any more. + icc* | ifort*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fPIC' + lt_prog_compiler_static='-static' + ;; + # Lahey Fortran 8.1. + lf95*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='--shared' + lt_prog_compiler_static='--static' + ;; + nagfor*) + # NAG Fortran compiler + lt_prog_compiler_wl='-Wl,-Wl,,' + lt_prog_compiler_pic='-PIC' + lt_prog_compiler_static='-Bstatic' + ;; + pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fpic' + lt_prog_compiler_static='-Bstatic' + ;; + ccc*) + lt_prog_compiler_wl='-Wl,' + # All Alpha code is PIC. + lt_prog_compiler_static='-non_shared' + ;; + xl* | bgxl* | bgf* | mpixl*) + # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-qpic' + lt_prog_compiler_static='-qstaticlink' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*) + # Sun Fortran 8.3 passes all unrecognized flags to the linker + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='' + ;; + *Sun\ F* | *Sun*Fortran*) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='-Qoption ld ' + ;; + *Sun\ C*) + # Sun C 5.9 + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='-Wl,' + ;; + *Intel*\ [CF]*Compiler*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fPIC' + lt_prog_compiler_static='-static' + ;; + *Portland\ Group*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fpic' + lt_prog_compiler_static='-Bstatic' + ;; + esac + ;; + esac + ;; + newsos6) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; -fi -echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 -echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6 - fi + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + lt_prog_compiler_pic='-fPIC -shared' + ;; - CPPFLAGS="$save_CPPFLAGS" - LDFLAGS="$save_LDFLAGS" - LIBS="$save_LIBS" - ;; - esac + osf3* | osf4* | osf5*) + lt_prog_compiler_wl='-Wl,' + # All OSF/1 code is PIC. + lt_prog_compiler_static='-non_shared' + ;; - case $lt_cv_dlopen_self in - yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; - *) enable_dlopen_self=unknown ;; - esac + rdos*) + lt_prog_compiler_static='-non_shared' + ;; - case $lt_cv_dlopen_self_static in - yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; - *) enable_dlopen_self_static=unknown ;; - esac -fi + solaris*) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + case $cc_basename in + f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) + lt_prog_compiler_wl='-Qoption ld ';; + *) + lt_prog_compiler_wl='-Wl,';; + esac + ;; + + sunos4*) + lt_prog_compiler_wl='-Qoption ld ' + lt_prog_compiler_pic='-PIC' + lt_prog_compiler_static='-Bstatic' + ;; + sysv4 | sysv4.2uw2* | sysv4.3*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; -# Report which librarie types wil actually be built -echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 -echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6 -echo "$as_me:$LINENO: result: $can_build_shared" >&5 -echo "${ECHO_T}$can_build_shared" >&6 - -echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 -echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6 -test "$can_build_shared" = "no" && enable_shared=no + sysv4*MP*) + if test -d /usr/nec ;then + lt_prog_compiler_pic='-Kconform_pic' + lt_prog_compiler_static='-Bstatic' + fi + ;; -# On AIX, shared libraries and static libraries use the same namespace, and -# are all built from PIC. -case $host_os in -aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; -aix4* | aix5*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no - fi - ;; -esac -echo "$as_me:$LINENO: result: $enable_shared" >&5 -echo "${ECHO_T}$enable_shared" >&6 + unicos*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_can_build_shared=no + ;; -echo "$as_me:$LINENO: checking whether to build static libraries" >&5 -echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6 -# Make sure either enable_shared or enable_static is yes. -test "$enable_shared" = yes || enable_static=yes -echo "$as_me:$LINENO: result: $enable_static" >&5 -echo "${ECHO_T}$enable_static" >&6 - -# The else clause should only fire when bootstrapping the -# libtool distribution, otherwise you forgot to ship ltmain.sh -# with your package, and you will get complaints that there are -# no rules to generate ltmain.sh. -if test -f "$ltmain"; then - # See if we are running on zsh, and set the options which allow our commands through - # without removal of \ escapes. - if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST - fi - # Now quote all the things that may contain metacharacters while being - # careful not to overquote the AC_SUBSTed values. We take copies of the - # variables and quote the copies for generation of the libtool script. - for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \ - SED SHELL STRIP \ - libname_spec library_names_spec soname_spec extract_expsyms_cmds \ - old_striplib striplib file_magic_cmd finish_cmds finish_eval \ - deplibs_check_method reload_flag reload_cmds need_locks \ - lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ - lt_cv_sys_global_symbol_to_c_name_address \ - sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ - old_postinstall_cmds old_postuninstall_cmds \ - compiler \ - CC \ - LD \ - lt_prog_compiler_wl \ - lt_prog_compiler_pic \ - lt_prog_compiler_static \ - lt_prog_compiler_no_builtin_flag \ - export_dynamic_flag_spec \ - thread_safe_flag_spec \ - whole_archive_flag_spec \ - enable_shared_with_static_runtimes \ - old_archive_cmds \ - old_archive_from_new_cmds \ - predep_objects \ - postdep_objects \ - predeps \ - postdeps \ - compiler_lib_search_path \ - archive_cmds \ - archive_expsym_cmds \ - postinstall_cmds \ - postuninstall_cmds \ - old_archive_from_expsyms_cmds \ - allow_undefined_flag \ - no_undefined_flag \ - export_symbols_cmds \ - hardcode_libdir_flag_spec \ - hardcode_libdir_flag_spec_ld \ - hardcode_libdir_separator \ - hardcode_automatic \ - module_cmds \ - module_expsym_cmds \ - lt_cv_prog_compiler_c_o \ - exclude_expsyms \ - include_expsyms; do - - case $var in - old_archive_cmds | \ - old_archive_from_new_cmds | \ - archive_cmds | \ - archive_expsym_cmds | \ - module_cmds | \ - module_expsym_cmds | \ - old_archive_from_expsyms_cmds | \ - export_symbols_cmds | \ - extract_expsyms_cmds | reload_cmds | finish_cmds | \ - postinstall_cmds | postuninstall_cmds | \ - old_postinstall_cmds | old_postuninstall_cmds | \ - sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) - # Double-quote double-evaled strings. - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" + uts4*) + lt_prog_compiler_pic='-pic' + lt_prog_compiler_static='-Bstatic' ;; + *) - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" + lt_prog_compiler_can_build_shared=no ;; esac - done + fi - case $lt_echo in - *'\$0 --fallback-echo"') - lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` +case $host_os in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + lt_prog_compiler_pic= ;; - esac - -cfgfile="${ofile}T" - trap "$rm \"$cfgfile\"; exit 1" 1 2 15 - $rm -f "$cfgfile" - { echo "$as_me:$LINENO: creating $ofile" >&5 -echo "$as_me: creating $ofile" >&6;} + *) + lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" + ;; +esac - cat <<__EOF__ >> "$cfgfile" -#! $SHELL +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 +$as_echo_n "checking for $compiler option to produce PIC... " >&6; } +if ${lt_cv_prog_compiler_pic+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_pic=$lt_prog_compiler_pic +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5 +$as_echo "$lt_cv_prog_compiler_pic" >&6; } +lt_prog_compiler_pic=$lt_cv_prog_compiler_pic -# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services. -# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) -# NOTE: Changes made to this file will be lost: look at ltmain.sh. # -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 -# Free Software Foundation, Inc. -# -# This file is part of GNU Libtool: -# Originally by Gordon Matzigkeit , 1996 -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +# Check to make sure the PIC flag actually works. # -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. +if test -n "$lt_prog_compiler_pic"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 +$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } +if ${lt_cv_prog_compiler_pic_works+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_pic_works=no + ac_outfile=conftest.$ac_objext + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$lt_prog_compiler_pic -DPIC" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_pic_works=yes + fi + fi + $RM conftest* -# A sed program that does not truncate output. -SED=$lt_SED +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5 +$as_echo "$lt_cv_prog_compiler_pic_works" >&6; } -# Sed that helps us avoid accidentally triggering echo(1) options like -n. -Xsed="$SED -e 1s/^X//" +if test x"$lt_cv_prog_compiler_pic_works" = xyes; then + case $lt_prog_compiler_pic in + "" | " "*) ;; + *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; + esac +else + lt_prog_compiler_pic= + lt_prog_compiler_can_build_shared=no +fi -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH +fi -# The names of the tagged configurations supported by this script. -available_tags= -# ### BEGIN LIBTOOL CONFIG -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared - -# Whether or not to build static libraries. -build_old_libs=$enable_static -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$archive_cmds_need_lc -# Whether or not to disallow shared libs when runtime libs are static -allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install -# The host system. -host_alias=$host_alias -host=$host -host_os=$host_os -# The build system. -build_alias=$build_alias -build=$build -build_os=$build_os -# An echo program that does not interpret backslashes. -echo=$lt_echo +# +# Check to make sure the static flag actually works. +# +wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } +if ${lt_cv_prog_compiler_static_works+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_static_works=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $lt_tmp_static_flag" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&5 + $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_static_works=yes + fi + else + lt_cv_prog_compiler_static_works=yes + fi + fi + $RM -r conftest* + LDFLAGS="$save_LDFLAGS" -# The archiver. -AR=$lt_AR -AR_FLAGS=$lt_AR_FLAGS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5 +$as_echo "$lt_cv_prog_compiler_static_works" >&6; } -# A C compiler. -LTCC=$lt_LTCC +if test x"$lt_cv_prog_compiler_static_works" = xyes; then + : +else + lt_prog_compiler_static= +fi -# A language-specific compiler. -CC=$lt_compiler -# Is the compiler the GNU C compiler? -with_gcc=$GCC -# An ERE matcher. -EGREP=$lt_EGREP -# The linker used to build libraries. -LD=$lt_LD -# Whether we need hard or soft links. -LN_S=$lt_LN_S -# A BSD-compatible nm program. -NM=$lt_NM -# A symbol stripping program -STRIP=$lt_STRIP + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 +$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +if ${lt_cv_prog_compiler_c_o+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_c_o=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext -# Used to examine libraries when file_magic_cmd begins "file" -MAGIC_CMD=$MAGIC_CMD + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o=yes + fi + fi + chmod u+w . 2>&5 + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* -# Used on cygwin: DLL creation program. -DLLTOOL="$DLLTOOL" +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 +$as_echo "$lt_cv_prog_compiler_c_o" >&6; } -# Used on cygwin: object dumper. -OBJDUMP="$OBJDUMP" -# Used on cygwin: assembler. -AS="$AS" -# The name of the directory that contains temporary libtool files. -objdir=$objdir -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds -# How to pass a linker flag through the compiler. -wl=$lt_lt_prog_compiler_wl -# Object file suffix (normally "o"). -objext="$ac_objext" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 +$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +if ${lt_cv_prog_compiler_c_o+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_c_o=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext -# Old archive suffix (normally "a"). -libext="$libext" + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o=yes + fi + fi + chmod u+w . 2>&5 + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* -# Shared library suffix (normally ".so"). -shrext_cmds='$shrext_cmds' +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 +$as_echo "$lt_cv_prog_compiler_c_o" >&6; } -# Executable file suffix (normally ""). -exeext="$exeext" -# Additional compiler flags for building library objects. -pic_flag=$lt_lt_prog_compiler_pic -pic_mode=$pic_mode -# What is the maximum length of a command? -max_cmd_len=$lt_cv_sys_max_cmd_len -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_lt_cv_prog_compiler_c_o +hard_links="nottested" +if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 +$as_echo_n "checking if we can lock with hard links... " >&6; } + hard_links=yes + $RM conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 +$as_echo "$hard_links" >&6; } + if test "$hard_links" = no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 +$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} + need_locks=warn + fi +else + need_locks=no +fi -# Must we lock files when doing compilation? -need_locks=$lt_need_locks -# Do we need the lib prefix for modules? -need_lib_prefix=$need_lib_prefix -# Do we need a version for libraries? -need_version=$need_version -# Whether dlopen is supported. -dlopen_support=$enable_dlopen -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_lt_prog_compiler_static + runpath_var= + allow_undefined_flag= + always_export_symbols=no + archive_cmds= + archive_expsym_cmds= + compiler_needs_object=no + enable_shared_with_static_runtimes=no + export_dynamic_flag_spec= + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + hardcode_automatic=no + hardcode_direct=no + hardcode_direct_absolute=no + hardcode_libdir_flag_spec= + hardcode_libdir_separator= + hardcode_minus_L=no + hardcode_shlibpath_var=unsupported + inherit_rpath=no + link_all_deplibs=unknown + module_cmds= + module_expsym_cmds= + old_archive_from_new_cmds= + old_archive_from_expsyms_cmds= + thread_safe_flag_spec= + whole_archive_flag_spec= + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + include_expsyms= + # exclude_expsyms can be an extended regexp of symbols to exclude + # it will be wrapped by ` (' and `)$', so one must not match beginning or + # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', + # as well as any symbol that contains `d'. + exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + # Exclude shared library initialization/finalization symbols. + extract_expsyms_cmds= -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag + case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + interix*) + # we just hope/assume this is gcc and not c89 (= MSVC++) + with_gnu_ld=yes + ;; + openbsd*) + with_gnu_ld=no + ;; + linux* | k*bsd*-gnu | gnu*) + link_all_deplibs=no + ;; + esac -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_export_dynamic_flag_spec + ld_shlibs=yes -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_whole_archive_flag_spec + # On some targets, GNU ld is compatible enough with the native linker + # that we're better off using the native interface for both. + lt_use_gnu_ld_interface=no + if test "$with_gnu_ld" = yes; then + case $host_os in + aix*) + # The AIX port of GNU ld has always aspired to compatibility + # with the native linker. However, as the warning in the GNU ld + # block says, versions before 2.19.5* couldn't really create working + # shared libraries, regardless of the interface used. + case `$LD -v 2>&1` in + *\ \(GNU\ Binutils\)\ 2.19.5*) ;; + *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;; + *\ \(GNU\ Binutils\)\ [3-9]*) ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + fi -# Compiler flag to generate thread-safe objects. -thread_safe_flag_spec=$lt_thread_safe_flag_spec + if test "$lt_use_gnu_ld_interface" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' -# Library versioning type. -version_type=$version_type + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + runpath_var=LD_RUN_PATH + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + export_dynamic_flag_spec='${wl}--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then + whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + whole_archive_flag_spec= + fi + supports_anon_versioning=no + case `$LD -v 2>&1` in + *GNU\ gold*) supports_anon_versioning=yes ;; + *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac -# Format of library name prefix. -libname_spec=$lt_libname_spec + # See if GNU ld supports shared libraries. + case $host_os in + aix[3-9]*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + ld_shlibs=no + cat <<_LT_EOF 1>&2 -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME. -library_names_spec=$lt_library_names_spec +*** Warning: the GNU linker, at least up to release 2.19, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to install binutils +*** 2.20 or above, or modify your PATH so that a non-GNU linker is found. +*** You will then need to restart the configuration process. -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec +_LT_EOF + fi + ;; -# Commands used to build and install an old-style archive. -RANLIB=$lt_RANLIB -old_archive_cmds=$lt_old_archive_cmds -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='' + ;; + m68k) + archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + esac + ;; -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_old_archive_from_new_cmds + beos*) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + allow_undefined_flag=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + ld_shlibs=no + fi + ;; -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds + cygwin* | mingw* | pw32* | cegcc*) + # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, + # as there is no search path for DLLs. + hardcode_libdir_flag_spec='-L$libdir' + export_dynamic_flag_spec='${wl}--export-all-symbols' + allow_undefined_flag=unsupported + always_export_symbols=no + enable_shared_with_static_runtimes=yes + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' + exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' -# Commands used to build and install a shared archive. -archive_cmds=$lt_archive_cmds -archive_expsym_cmds=$lt_archive_expsym_cmds -postinstall_cmds=$lt_postinstall_cmds -postuninstall_cmds=$lt_postuninstall_cmds + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + ld_shlibs=no + fi + ;; -# Commands used to build a loadable module (assumed same as above if empty) -module_cmds=$lt_module_cmds -module_expsym_cmds=$lt_module_expsym_cmds + haiku*) + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + link_all_deplibs=yes + ;; -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib + interix[3-9]*) + hardcode_direct=no + hardcode_shlibpath_var=no + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + export_dynamic_flag_spec='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; -# Dependencies to place before the objects being linked to create a -# shared library. -predep_objects=$lt_predep_objects + gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) + tmp_diet=no + if test "$host_os" = linux-dietlibc; then + case $cc_basename in + diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) + esac + fi + if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ + && test "$tmp_diet" = no + then + tmp_addflag=' $pic_flag' + tmp_sharedflag='-shared' + case $cc_basename,$host_cpu in + pgcc*) # Portland Group C compiler + whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag' + ;; + pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group f77 and f90 compilers + whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag -Mnomain' ;; + ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 + tmp_addflag=' -i_dynamic' ;; + efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 + tmp_addflag=' -i_dynamic -nofor_main' ;; + ifc* | ifort*) # Intel Fortran compiler + tmp_addflag=' -nofor_main' ;; + lf95*) # Lahey Fortran 8.1 + whole_archive_flag_spec= + tmp_sharedflag='--shared' ;; + xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) + tmp_sharedflag='-qmkshrobj' + tmp_addflag= ;; + nvcc*) # Cuda Compiler Driver 2.2 + whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + compiler_needs_object=yes + ;; + esac + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) # Sun C 5.9 + whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + compiler_needs_object=yes + tmp_sharedflag='-G' ;; + *Sun\ F*) # Sun Fortran 8.3 + tmp_sharedflag='-G' ;; + esac + archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -# Dependencies to place after the objects being linked to create a -# shared library. -postdep_objects=$lt_postdep_objects + if test "x$supports_anon_versioning" = xyes; then + archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi -# Dependencies to place before the objects being linked to create a -# shared library. -predeps=$lt_predeps + case $cc_basename in + xlf* | bgf* | bgxlf* | mpixlf*) + # IBM XL Fortran 10.1 on PPC cannot create shared libs itself + whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' + if test "x$supports_anon_versioning" = xyes; then + archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' + fi + ;; + esac + else + ld_shlibs=no + fi + ;; -# Dependencies to place after the objects being linked to create a -# shared library. -postdeps=$lt_postdeps + netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; -# The library search path used internally by the compiler when linking -# a shared library. -compiler_lib_search_path=$lt_compiler_lib_search_path + solaris*) + if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then + ld_shlibs=no + cat <<_LT_EOF 1>&2 -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. -# Command to use when deplibs_check_method == file_magic. -file_magic_cmd=$lt_file_magic_cmd +_LT_EOF + elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_allow_undefined_flag + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) + case `$LD -v 2>&1` in + *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) + ld_shlibs=no + cat <<_LT_EOF 1>&2 -# Flag that forces no undefined symbols. -no_undefined_flag=$lt_no_undefined_flag +*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not +*** reliably create shared libraries on SCO systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.16.91.0.3 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds +_LT_EOF + ;; + *) + # For security reasons, it is highly recommended that you always + # use absolute paths for naming shared libraries, and exclude the + # DT_RUNPATH tag from executables and libraries. But doing so + # requires that you compile everything twice, which is a pain. + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + esac + ;; -# Same as above, but a single script fragment to be evaled but not shown. -finish_eval=$lt_finish_eval + sunos4*) + archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + *) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + esac -# Transform the output of nm in a proper C declaration -global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + if test "$ld_shlibs" = no; then + runpath_var= + hardcode_libdir_flag_spec= + export_dynamic_flag_spec= + whole_archive_flag_spec= + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + allow_undefined_flag=unsupported + always_export_symbols=yes + archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + hardcode_minus_L=yes + if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + hardcode_direct=unsupported + fi + ;; -# Transform the output of nm in a C name address pair -global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + aix[4-9]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + # Also, AIX nm treats weak defined symbols like other global + # defined symbols, whereas GNU nm marks them as "W". + if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then + export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + else + export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + fi + aix_use_runtimelinking=no -# This is the shared library runtime path variable. -runpath_var=$runpath_var + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + ;; + esac -# This is the shared library path variable. -shlibpath_var=$shlibpath_var + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. -# How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action + archive_cmds='' + hardcode_direct=yes + hardcode_direct_absolute=yes + hardcode_libdir_separator=':' + link_all_deplibs=yes + file_list_spec='${wl}-f,' -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs + if test "$GCC" = yes; then + case $host_os in aix4.[012]|aix4.[012].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && + strings "$collect2name" | $GREP resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + hardcode_direct=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + hardcode_minus_L=yes + hardcode_libdir_flag_spec='-L$libdir' + hardcode_libdir_separator= + fi + ;; + esac + shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi + link_all_deplibs=no + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec + export_dynamic_flag_spec='${wl}-bexpall' + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + always_export_symbols=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + allow_undefined_flag='-berok' + # Determine the default libpath from the value encoded in an + # empty executable. + if test "${lt_cv_aix_libpath+set}" = set; then + aix_libpath=$lt_cv_aix_libpath +else + if ${lt_cv_aix_libpath_+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ -# If ld is used when linking, flag to hardcode \$libdir into -# a binary during linking. This must work even if \$libdir does -# not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld +int +main () +{ -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator=$lt_hardcode_libdir_separator + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : -# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the -# resulting binary. -hardcode_direct=$hardcode_direct - -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L=$hardcode_minus_L - -# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into -# the resulting binary. -hardcode_shlibpath_var=$hardcode_shlibpath_var + lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\([^ ]*\) *$/\1/ + p + } + }' + lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_="/usr/lib:/lib" + fi -# Set to yes if building a shared library automatically hardcodes DIR into the library -# and all subsequent libraries and executables linked against it. -hardcode_automatic=$hardcode_automatic +fi -# Variables whose values should be saved in libtool wrapper scripts and -# restored at relink time. -variables_saved_for_relink="$variables_saved_for_relink" + aix_libpath=$lt_cv_aix_libpath_ +fi -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$link_all_deplibs + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' + allow_undefined_flag="-z nodefs" + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an + # empty executable. + if test "${lt_cv_aix_libpath+set}" = set; then + aix_libpath=$lt_cv_aix_libpath +else + if ${lt_cv_aix_libpath_+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ -# Compile-time system search path for libraries -sys_lib_search_path_spec=$lt_sys_lib_search_path_spec +int +main () +{ -# Run-time system search path for libraries -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : -# Fix the shell variable \$srcfile for the compiler. -fix_srcfile_path="$fix_srcfile_path" + lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\([^ ]*\) *$/\1/ + p + } + }' + lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_="/usr/lib:/lib" + fi -# Set to yes if exported symbols are required. -always_export_symbols=$always_export_symbols +fi -# The commands to list exported symbols. -export_symbols_cmds=$lt_export_symbols_cmds + aix_libpath=$lt_cv_aix_libpath_ +fi -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + no_undefined_flag=' ${wl}-bernotok' + allow_undefined_flag=' ${wl}-berok' + if test "$with_gnu_ld" = yes; then + # We only use this code for GNU lds that support --whole-archive. + whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + else + # Exported symbols can be pulled into shared objects from archives + whole_archive_flag_spec='$convenience' + fi + archive_cmds_need_lc=yes + # This is similar to how AIX traditionally builds its shared libraries. + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_exclude_expsyms + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='' + ;; + m68k) + archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + esac + ;; -# Symbols that must always be exported. -include_expsyms=$lt_include_expsyms + bsdi[45]*) + export_dynamic_flag_spec=-rdynamic + ;; -# ### END LIBTOOL CONFIG + cygwin* | mingw* | pw32* | cegcc*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + case $cc_basename in + cl*) + # Native MSVC + hardcode_libdir_flag_spec=' ' + allow_undefined_flag=unsupported + always_export_symbols=yes + file_list_spec='@' + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' + archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; + else + sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; + fi~ + $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ + linknames=' + # The linker will not automatically build a static lib if we build a DLL. + # _LT_TAGVAR(old_archive_from_new_cmds, )='true' + enable_shared_with_static_runtimes=yes + exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' + # Don't use ranlib + old_postinstall_cmds='chmod 644 $oldlib' + postlink_cmds='lt_outputfile="@OUTPUT@"~ + lt_tool_outputfile="@TOOL_OUTPUT@"~ + case $lt_outputfile in + *.exe|*.EXE) ;; + *) + lt_outputfile="$lt_outputfile.exe" + lt_tool_outputfile="$lt_tool_outputfile.exe" + ;; + esac~ + if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then + $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; + $RM "$lt_outputfile.manifest"; + fi' + ;; + *) + # Assume MSVC wrapper + hardcode_libdir_flag_spec=' ' + allow_undefined_flag=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + old_archive_from_new_cmds='true' + # FIXME: Should let the user specify the lib program. + old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' + enable_shared_with_static_runtimes=yes + ;; + esac + ;; -__EOF__ + darwin* | rhapsody*) - case $host_os in - aix3*) - cat <<\EOF >> "$cfgfile" + archive_cmds_need_lc=no + hardcode_direct=no + hardcode_automatic=yes + hardcode_shlibpath_var=unsupported + if test "$lt_cv_ld_force_load" = "yes"; then + whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' -# AIX sometimes has problems with the GCC collect2 program. For some -# reason, if we set the COLLECT_NAMES environment variable, the problems -# vanish in a puff of smoke. -if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES -fi -EOF - ;; + else + whole_archive_flag_spec='' + fi + link_all_deplibs=yes + allow_undefined_flag="$_lt_dar_allow_undefined" + case $cc_basename in + ifort*) _lt_dar_can_shared=yes ;; + *) _lt_dar_can_shared=$GCC ;; esac + if test "$_lt_dar_can_shared" = "yes"; then + output_verbose_link_cmd=func_echo_all + archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" + module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" + archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" + module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" - # We use sed instead of cat because bash on DJGPP gets confused if - # if finds mixed CR/LF and LF-only lines. Since sed operates in - # text mode, it properly converts lines to CR/LF. This bash problem - # is reportedly fixed, but why not run on old versions too? - sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1) - - mv -f "$cfgfile" "$ofile" || \ - (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") - chmod +x "$ofile" - -else - # If there is no Makefile yet, we rely on a make rule to execute - # `config.status --recheck' to rerun these tests and create the - # libtool script then. - ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` - if test -f "$ltmain_in"; then - test -f Makefile && make "$ltmain" + else + ld_shlibs=no fi -fi - - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -CC="$lt_save_CC" + ;; -# Check whether --with-tags or --without-tags was given. -if test "${with_tags+set}" = set; then - withval="$with_tags" - tagnames="$withval" -fi; - -if test -f "$ltmain" && test -n "$tagnames"; then - if test ! -f "${ofile}"; then - { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not exist" >&5 -echo "$as_me: WARNING: output file \`$ofile' does not exist" >&2;} - fi - - if test -z "$LTCC"; then - eval "`$SHELL ${ofile} --config | grep '^LTCC='`" - if test -z "$LTCC"; then - { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not look like a libtool script" >&5 -echo "$as_me: WARNING: output file \`$ofile' does not look like a libtool script" >&2;} - else - { echo "$as_me:$LINENO: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&5 -echo "$as_me: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&2;} - fi - fi + dgux*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; - # Extract list of available tagged configurations in $ofile. - # Note that this assumes the entire list is on one line. - available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'` + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for tagname in $tagnames; do - IFS="$lt_save_ifs" - # Check whether tagname contains only valid characters - case `$echo "X$tagname" | $Xsed -e 's:[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]::g'` in - "") ;; - *) { { echo "$as_me:$LINENO: error: invalid tag name: $tagname" >&5 -echo "$as_me: error: invalid tag name: $tagname" >&2;} - { (exit 1); exit 1; }; } - ;; - esac + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2.*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; - if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null - then - { { echo "$as_me:$LINENO: error: tag name \"$tagname\" already exists" >&5 -echo "$as_me: error: tag name \"$tagname\" already exists" >&2;} - { (exit 1); exit 1; }; } - fi + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | dragonfly*) + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; - # Update the list of available tags. - if test -n "$tagname"; then - echo appending configuration tag \"$tagname\" to $ofile - - case $tagname in - CXX) - if test -n "$CXX" && ( test "X$CXX" != "Xno" && - ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || - (test "X$CXX" != "Xg++"))) ; then - ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu + hpux9*) + if test "$GCC" = yes; then + archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + fi + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + export_dynamic_flag_spec='${wl}-E' + ;; + hpux10*) + if test "$GCC" = yes && test "$with_gnu_ld" = no; then + archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + fi + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + hardcode_direct_absolute=yes + export_dynamic_flag_spec='${wl}-E' + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + fi + ;; + hpux11*) + if test "$GCC" = yes && test "$with_gnu_ld" = no; then + case $host_cpu in + hppa*64*) + archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else + case $host_cpu in + hppa*64*) + archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) -archive_cmds_need_lc_CXX=no -allow_undefined_flag_CXX= -always_export_symbols_CXX=no -archive_expsym_cmds_CXX= -export_dynamic_flag_spec_CXX= -hardcode_direct_CXX=no -hardcode_libdir_flag_spec_CXX= -hardcode_libdir_flag_spec_ld_CXX= -hardcode_libdir_separator_CXX= -hardcode_minus_L_CXX=no -hardcode_automatic_CXX=no -module_cmds_CXX= -module_expsym_cmds_CXX= -link_all_deplibs_CXX=unknown -old_archive_cmds_CXX=$old_archive_cmds -no_undefined_flag_CXX= -whole_archive_flag_spec_CXX= -enable_shared_with_static_runtimes_CXX=no + # Older versions of the 11.00 compiler do not understand -b yet + # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5 +$as_echo_n "checking if $CC understands -b... " >&6; } +if ${lt_cv_prog_compiler__b+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler__b=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS -b" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&5 + $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler__b=yes + fi + else + lt_cv_prog_compiler__b=yes + fi + fi + $RM -r conftest* + LDFLAGS="$save_LDFLAGS" -# Dependencies to place before and after the object being linked: -predep_objects_CXX= -postdep_objects_CXX= -predeps_CXX= -postdeps_CXX= -compiler_lib_search_path_CXX= +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5 +$as_echo "$lt_cv_prog_compiler__b" >&6; } -# Source file extension for C++ test sources. -ac_ext=cpp +if test x"$lt_cv_prog_compiler__b" = xyes; then + archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' +else + archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' +fi -# Object file extension for compiled C++ test sources. -objext=o -objext_CXX=$objext + ;; + esac + fi + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: -# Code to be used in simple compile tests -lt_simple_compile_test_code="int some_variable = 0;\n" + case $host_cpu in + hppa*64*|ia64*) + hardcode_direct=no + hardcode_shlibpath_var=no + ;; + *) + hardcode_direct=yes + hardcode_direct_absolute=yes + export_dynamic_flag_spec='${wl}-E' -# Code to be used in simple link tests -lt_simple_link_test_code='int main(int, char *) { return(0); }\n' + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + ;; + esac + fi + ;; -# ltmain only uses $CC for tagged configurations so make sure $CC is set. - -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} - -# Allow CC to be a program name with arguments. -compiler=$CC - - -# save warnings/boilerplate of simple test code -ac_outfile=conftest.$ac_objext -printf "$lt_simple_compile_test_code" >conftest.$ac_ext -eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d' >conftest.err -_lt_compiler_boilerplate=`cat conftest.err` -$rm conftest* + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + # Try to use the -exported_symbol ld option, if it does not + # work, assume that -exports_file does not work either and + # implicitly export all symbols. + # This should be the same for all languages, so no per-tag cache variable. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5 +$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; } +if ${lt_cv_irix_exported_symbol+:} false; then : + $as_echo_n "(cached) " >&6 +else + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +int foo (void) { return 0; } +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + lt_cv_irix_exported_symbol=yes +else + lt_cv_irix_exported_symbol=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS="$save_LDFLAGS" +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5 +$as_echo "$lt_cv_irix_exported_symbol" >&6; } + if test "$lt_cv_irix_exported_symbol" = yes; then + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' + fi + else + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' + fi + archive_cmds_need_lc='no' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + inherit_rpath=yes + link_all_deplibs=yes + ;; -ac_outfile=conftest.$ac_objext -printf "$lt_simple_link_test_code" >conftest.$ac_ext -eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d' >conftest.err -_lt_linker_boilerplate=`cat conftest.err` -$rm conftest* + netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + newsos6) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_shlibpath_var=no + ;; -# Allow CC to be a program name with arguments. -lt_save_CC=$CC -lt_save_LD=$LD -lt_save_GCC=$GCC -GCC=$GXX -lt_save_with_gnu_ld=$with_gnu_ld -lt_save_path_LD=$lt_cv_path_LD -if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then - lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx -else - unset lt_cv_prog_gnu_ld -fi -if test -n "${lt_cv_path_LDCXX+set}"; then - lt_cv_path_LD=$lt_cv_path_LDCXX -else - unset lt_cv_path_LD -fi -test -z "${LDCXX+set}" || LD=$LDCXX -CC=${CXX-"c++"} -compiler=$CC -compiler_CXX=$CC -for cc_temp in $compiler""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` + *nto* | *qnx*) + ;; + openbsd*) + if test -f /usr/libexec/ld.so; then + hardcode_direct=yes + hardcode_shlibpath_var=no + hardcode_direct_absolute=yes + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + export_dynamic_flag_spec='${wl}-E' + else + case $host_os in + openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-R$libdir' + ;; + *) + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + ;; + esac + fi + else + ld_shlibs=no + fi + ;; -# We don't want -fno-exception wen compiling C++ code, so set the -# no_builtin_flag separately -if test "$GXX" = yes; then - lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin' -else - lt_prog_compiler_no_builtin_flag_CXX= -fi + os2*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + allow_undefined_flag=unsupported + archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + ;; -if test "$GXX" = yes; then - # Set up default GNU C++ configuration + osf3*) + if test "$GCC" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + fi + archive_cmds_need_lc='no' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + ;; + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ + $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' -# Check whether --with-gnu-ld or --without-gnu-ld was given. -if test "${with_gnu_ld+set}" = set; then - withval="$with_gnu_ld" - test "$withval" = no || with_gnu_ld=yes -else - with_gnu_ld=no -fi; -ac_prog=ld -if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - echo "$as_me:$LINENO: checking for ld used by $CC" >&5 -echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6 - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [\\/]* | ?:[\\/]*) - re_direlt='/[^/][^/]*/\.\./' - # Canonicalize the pathname of ld - ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` - while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" + # Both c and cxx compiler support -rpath directly + hardcode_libdir_flag_spec='-rpath $libdir' + fi + archive_cmds_need_lc='no' + hardcode_libdir_separator=: ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - echo "$as_me:$LINENO: checking for GNU ld" >&5 -echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6 -else - echo "$as_me:$LINENO: checking for non-GNU ld" >&5 -echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6 -fi -if test "${lt_cv_path_LD+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -z "$LD"; then - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some variants of GNU ld only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - case `"$lt_cv_path_LD" -v 2>&1 &1` in + *"Compilers 5.0"*) + wlarc='' + archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' + ;; + *) + wlarc='${wl}' + archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + ;; + esac + fi + hardcode_libdir_flag_spec='-R$libdir' + hardcode_shlibpath_var=no + case $host_os in + solaris2.[0-5] | solaris2.[0-5].*) ;; *) - test "$with_gnu_ld" != yes && break + # The compiler driver will combine and reorder linker options, + # but understands `-z linker_flag'. GCC discards it without `$wl', + # but is careful enough not to reorder. + # Supported since Solaris 2.6 (maybe 2.5.1?) + if test "$GCC" = yes; then + whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + else + whole_archive_flag_spec='-z allextract$convenience -z defaultextract' + fi ;; esac - fi - done - IFS="$lt_save_ifs" -else - lt_cv_path_LD="$LD" # Let the user override the test with a path. -fi -fi - -LD="$lt_cv_path_LD" -if test -n "$LD"; then - echo "$as_me:$LINENO: result: $LD" >&5 -echo "${ECHO_T}$LD" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi -test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 -echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} - { (exit 1); exit 1; }; } -echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 -echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6 -if test "${lt_cv_prog_gnu_ld+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - # I'd rather use --version here, but apparently some GNU lds only accept -v. -case `$LD -v 2>&1 &5 -echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6 -with_gnu_ld=$lt_cv_prog_gnu_ld + link_all_deplibs=yes + ;; + sunos4*) + if test "x$host_vendor" = xsequent; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + hardcode_libdir_flag_spec='-L$libdir' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + sysv4) + case $host_vendor in + sni) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes # is this really true??? + ;; + siemens) + ## LD is ld it makes a PLAMLIB + ## CC just makes a GrossModule. + archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' + reload_cmds='$CC -r -o $output$reload_objs' + hardcode_direct=no + ;; + motorola) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=no #Motorola manual says yes, but my tests say they lie + ;; + esac + runpath_var='LD_RUN_PATH' + hardcode_shlibpath_var=no + ;; - # Check if GNU C++ uses GNU ld as the underlying linker, since the - # archiving commands below assume that GNU ld is being used. - if test "$with_gnu_ld" = yes; then - archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + sysv4.3*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + export_dynamic_flag_spec='-Bexport' + ;; - hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir' - export_dynamic_flag_spec_CXX='${wl}--export-dynamic' + sysv4*MP*) + if test -d /usr/nec; then + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + ld_shlibs=yes + fi + ;; - # If archive_cmds runs LD, not CC, wlarc should be empty - # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to - # investigate it a little bit more. (MM) - wlarc='${wl}' + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) + no_undefined_flag='${wl}-z,text' + archive_cmds_need_lc=no + hardcode_shlibpath_var=no + runpath_var='LD_RUN_PATH' - # ancient GNU ld didn't support --whole-archive et. al. - if eval "`$CC -print-prog-name=ld` --help 2>&1" | \ - grep 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - whole_archive_flag_spec_CXX= - fi - else - with_gnu_ld=no - wlarc= + if test "$GCC" = yes; then + archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; - # A generic and very simple default shared library creation - # command for GNU C++ for the case where it uses the native - # linker, instead of GNU ld. If possible, this setting should - # overridden to take advantage of the native linker features on - # the platform it is being used on. - archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' - fi + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + no_undefined_flag='${wl}-z,text' + allow_undefined_flag='${wl}-z,nodefs' + archive_cmds_need_lc=no + hardcode_shlibpath_var=no + hardcode_libdir_flag_spec='${wl}-R,$libdir' + hardcode_libdir_separator=':' + link_all_deplibs=yes + export_dynamic_flag_spec='${wl}-Bexport' + runpath_var='LD_RUN_PATH' - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' + if test "$GCC" = yes; then + archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; -else - GXX=no - with_gnu_ld=no - wlarc= -fi + uts4*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; -# PORTME: fill in a description of your system's C++ link characteristics -echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 -echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 -ld_shlibs_CXX=yes -case $host_os in - aix3*) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - aix4* | aix5*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - aix_use_runtimelinking=no + *) + ld_shlibs=no + ;; + esac - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[23]|aix4.[23].*|aix5*) - for ld_flag in $LDFLAGS; do - case $ld_flag in - *-brtl*) - aix_use_runtimelinking=yes - break - ;; - esac - done + if test x$host_vendor = xsni; then + case $host in + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + export_dynamic_flag_spec='${wl}-Blargedynsym' + ;; esac - - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' fi + fi - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - archive_cmds_CXX='' - hardcode_direct_CXX=yes - hardcode_libdir_separator_CXX=':' - link_all_deplibs_CXX=yes +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5 +$as_echo "$ld_shlibs" >&6; } +test "$ld_shlibs" = no && can_build_shared=no - if test "$GXX" = yes; then - case $host_os in aix4.[012]|aix4.[012].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - hardcode_direct_CXX=yes - else - # We have old collect2 - hardcode_direct_CXX=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - hardcode_minus_L_CXX=yes - hardcode_libdir_flag_spec_CXX='-L$libdir' - hardcode_libdir_separator_CXX= - fi - esac - shared_flag='-shared' - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' - fi - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' - else - shared_flag='${wl}-bM:SRE' - fi - fi - fi +with_gnu_ld=$with_gnu_ld - # It seems that -bexpall does not export symbols beginning with - # underscore (_), so it is better to generate a list of symbols to export. - always_export_symbols_CXX=yes - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - allow_undefined_flag_CXX='-berok' - # Determine the default libpath from the value encoded in an empty executable. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -int -main () -{ - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'`; fi -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi - hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" - archive_expsym_cmds_CXX="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib' - allow_undefined_flag_CXX="-z nodefs" - archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an empty executable. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -int -main () -{ - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'`; fi -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi - hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - no_undefined_flag_CXX=' ${wl}-bernotok' - allow_undefined_flag_CXX=' ${wl}-berok' - # -bexpall does not export symbols beginning with underscore (_) - always_export_symbols_CXX=yes - # Exported symbols can be pulled into shared objects from archives - whole_archive_flag_spec_CXX=' ' - archive_cmds_need_lc_CXX=yes - # This is similar to how AIX traditionally builds its shared libraries. - archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi - fi - ;; - chorus*) - case $cc_basename in - *) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - esac - ;; - cygwin* | mingw* | pw32*) - # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless, - # as there is no search path for DLLs. - hardcode_libdir_flag_spec_CXX='-L$libdir' - allow_undefined_flag_CXX=unsupported - always_export_symbols_CXX=no - enable_shared_with_static_runtimes_CXX=yes - - if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then - archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' - else - ld_shlibs_CXX=no - fi - ;; - darwin* | rhapsody*) - case $host_os in - rhapsody* | darwin1.[012]) - allow_undefined_flag_CXX='${wl}-undefined ${wl}suppress' - ;; - *) # Darwin 1.3 on - if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then - allow_undefined_flag_CXX='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' - else - case ${MACOSX_DEPLOYMENT_TARGET} in - 10.[012]) - allow_undefined_flag_CXX='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' - ;; - 10.*) - allow_undefined_flag_CXX='${wl}-undefined ${wl}dynamic_lookup' - ;; - esac - fi - ;; - esac - archive_cmds_need_lc_CXX=no - hardcode_direct_CXX=no - hardcode_automatic_CXX=yes - hardcode_shlibpath_var_CXX=unsupported - whole_archive_flag_spec_CXX='' - link_all_deplibs_CXX=yes - - if test "$GXX" = yes ; then - lt_int_apple_cc_single_mod=no - output_verbose_link_cmd='echo' - if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then - lt_int_apple_cc_single_mod=yes - fi - if test "X$lt_int_apple_cc_single_mod" = Xyes ; then - archive_cmds_CXX='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' - else - archive_cmds_CXX='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' - fi - module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds - if test "X$lt_int_apple_cc_single_mod" = Xyes ; then - archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - else - archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - fi - module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - else - case $cc_basename in - xlc*) - output_verbose_link_cmd='echo' - archive_cmds_CXX='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' - module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds - archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - ;; - *) - ld_shlibs_CXX=no - ;; - esac - fi - ;; - dgux*) - case $cc_basename in - ec++*) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - ghcx*) - # Green Hills C++ Compiler - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - *) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - esac - ;; - freebsd[12]*) - # C++ shared libraries reported to be fairly broken before switch to ELF - ld_shlibs_CXX=no - ;; - freebsd-elf*) - archive_cmds_need_lc_CXX=no - ;; - freebsd* | kfreebsd*-gnu | dragonfly*) - # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF - # conventions - ld_shlibs_CXX=yes - ;; - gnu*) - ;; - hpux9*) - hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' - hardcode_libdir_separator_CXX=: - export_dynamic_flag_spec_CXX='${wl}-E' - hardcode_direct_CXX=yes - hardcode_minus_L_CXX=yes # Not in the search PATH, - # but as the default - # location of the library. +# +# Do we need to explicitly link libc? +# +case "x$archive_cmds_need_lc" in +x|xyes) + # Assume -lc should be added + archive_cmds_need_lc=yes - case $cc_basename in - CC*) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - aCC*) - archive_cmds_CXX='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - *) - if test "$GXX" = yes; then - archive_cmds_CXX='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - else - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - fi - ;; - esac - ;; - hpux10*|hpux11*) - if test $with_gnu_ld = no; then - case $host_cpu in - hppa*64*) - hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' - hardcode_libdir_flag_spec_ld_CXX='+b $libdir' - hardcode_libdir_separator_CXX=: - ;; - ia64*) - hardcode_libdir_flag_spec_CXX='-L$libdir' - ;; - *) - hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' - hardcode_libdir_separator_CXX=: - export_dynamic_flag_spec_CXX='${wl}-E' - ;; - esac - fi - case $host_cpu in - hppa*64*) - hardcode_direct_CXX=no - hardcode_shlibpath_var_CXX=no - ;; - ia64*) - hardcode_direct_CXX=no - hardcode_shlibpath_var_CXX=no - hardcode_minus_L_CXX=yes # Not in the search PATH, - # but as the default - # location of the library. - ;; - *) - hardcode_direct_CXX=yes - hardcode_minus_L_CXX=yes # Not in the search PATH, - # but as the default - # location of the library. + if test "$enable_shared" = yes && test "$GCC" = yes; then + case $archive_cmds in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. ;; - esac + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 +$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } +if ${lt_cv_archive_cmds_need_lc+:} false; then : + $as_echo_n "(cached) " >&6 +else + $RM conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext - case $cc_basename in - CC*) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - aCC*) - case $host_cpu in - hppa*64*|ia64*) - archive_cmds_CXX='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' - ;; - *) - archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - esac - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - *) - if test "$GXX" = yes; then - if test $with_gnu_ld = no; then - case $host_cpu in - ia64*|hppa*64*) - archive_cmds_CXX='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' - ;; - *) - archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - esac - fi - else - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - fi - ;; - esac - ;; - irix5* | irix6*) - case $cc_basename in - CC*) - # SGI C++ - archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - - # Archives containing C++ object files must be created using - # "CC -ar", where "CC" is the IRIX C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs' - ;; - *) - if test "$GXX" = yes; then - if test "$with_gnu_ld" = no; then - archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_prog_compiler_wl + pic_flag=$lt_prog_compiler_pic + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$allow_undefined_flag + allow_undefined_flag= + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 + (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + then + lt_cv_archive_cmds_need_lc=no else - archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib' + lt_cv_archive_cmds_need_lc=yes fi + allow_undefined_flag=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 fi - link_all_deplibs_CXX=yes - ;; + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5 +$as_echo "$lt_cv_archive_cmds_need_lc" >&6; } + archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc + ;; esac - hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator_CXX=: - ;; - linux*) - case $cc_basename in - KCC*) - # Kuck and Associates, Inc. (KAI) C++ Compiler + fi + ;; +esac + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - - hardcode_libdir_flag_spec_CXX='${wl}--rpath,$libdir' - export_dynamic_flag_spec_CXX='${wl}--export-dynamic' - - # Archives containing C++ object files must be created using - # "CC -Bstatic", where "CC" is the KAI C++ compiler. - old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' - ;; - icpc*) - # Intel C++ - with_gnu_ld=yes - # version 8.0 and above of icpc choke on multiply defined symbols - # if we add $predep_objects and $postdep_objects, however 7.1 and - # earlier do not add the objects themselves. - case `$CC -V 2>&1` in - *"Version 7."*) - archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - ;; - *) # Version 8.0 or newer - tmp_idyn= - case $host_cpu in - ia64*) tmp_idyn=' -i_dynamic';; - esac - archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - ;; - esac - archive_cmds_need_lc_CXX=no - hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' - export_dynamic_flag_spec_CXX='${wl}--export-dynamic' - whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive' - ;; - pgCC*) - # Portland Group C++ compiler - archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' - archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' - - hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir' - export_dynamic_flag_spec_CXX='${wl}--export-dynamic' - whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' - ;; - cxx*) - # Compaq C++ - archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' - runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec_CXX='-rpath $libdir' - hardcode_libdir_separator_CXX=: - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - esac - ;; - lynxos*) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - m88k*) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - mvs*) - case $cc_basename in - cxx*) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - *) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - esac - ;; - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds_CXX='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' - wlarc= - hardcode_libdir_flag_spec_CXX='-R$libdir' - hardcode_direct_CXX=yes - hardcode_shlibpath_var_CXX=no - fi - # Workaround some broken pre-1.5 toolchains - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' - ;; - openbsd2*) - # C++ shared libraries are fairly broken - ld_shlibs_CXX=no - ;; - openbsd*) - hardcode_direct_CXX=yes - hardcode_shlibpath_var_CXX=no - archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' - hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' - export_dynamic_flag_spec_CXX='${wl}-E' - whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - fi - output_verbose_link_cmd='echo' - ;; - osf3*) - case $cc_basename in - KCC*) - # Kuck and Associates, Inc. (KAI) C++ Compiler - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' - hardcode_libdir_separator_CXX=: - # Archives containing C++ object files must be created using - # "CC -Bstatic", where "CC" is the KAI C++ compiler. - old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' - ;; - RCC*) - # Rational C++ 2.4.1 - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - cxx*) - allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - - hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator_CXX=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - *) - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator_CXX=: - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' - else - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - fi - ;; - esac - ;; - osf4* | osf5*) - case $cc_basename in - KCC*) - # Kuck and Associates, Inc. (KAI) C++ Compiler - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' - hardcode_libdir_separator_CXX=: - # Archives containing C++ object files must be created using - # the KAI C++ compiler. - old_archive_cmds_CXX='$CC -o $oldlib $oldobjs' - ;; - RCC*) - # Rational C++ 2.4.1 - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - cxx*) - allow_undefined_flag_CXX=' -expect_unresolved \*' - archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ - echo "-hidden">> $lib.exp~ - $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~ - $rm $lib.exp' - - hardcode_libdir_flag_spec_CXX='-rpath $libdir' - hardcode_libdir_separator_CXX=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - *) - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator_CXX=: - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' - else - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - fi - ;; - esac - ;; - psos*) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - sco*) - archive_cmds_need_lc_CXX=no - case $cc_basename in - CC*) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - *) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - esac - ;; - sunos4*) - case $cc_basename in - CC*) - # Sun C++ 4.x - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - lcc*) - # Lucid - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - *) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - esac - ;; - solaris*) - case $cc_basename in - CC*) - # Sun C++ 4.2, 5.x and Centerline C++ - archive_cmds_need_lc_CXX=yes - no_undefined_flag_CXX=' -zdefs' - archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' - hardcode_libdir_flag_spec_CXX='-R$libdir' - hardcode_shlibpath_var_CXX=no - case $host_os in - solaris2.[0-5] | solaris2.[0-5].*) ;; - *) - # The C++ compiler is used as linker so we must use $wl - # flag to pass the commands to the underlying system - # linker. We must also pass each convience library through - # to the system linker between allextract/defaultextract. - # The C++ compiler will combine linker options so we - # cannot just pass the convience library names through - # without $wl. - # Supported since Solaris 2.6 (maybe 2.5.1?) - whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' - ;; - esac - link_all_deplibs_CXX=yes - output_verbose_link_cmd='echo' - # Archives containing C++ object files must be created using - # "CC -xar", where "CC" is the Sun C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs' - ;; - gcx*) - # Green Hills C++ Compiler - archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - # The C++ compiler must be used to create the archive. - old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs' - ;; - *) - # GNU C++ compiler with Solaris linker - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - no_undefined_flag_CXX=' ${wl}-z ${wl}defs' - if $CC --version | grep -v '^2\.7' > /dev/null; then - archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" - else - # g++ 2.7 appears to require `-G' NOT `-shared' on this - # platform. - archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" - fi - hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir' - fi - ;; - esac - ;; - sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*) - archive_cmds_need_lc_CXX=no - ;; - tandem*) - case $cc_basename in - NCC*) - # NonStop-UX NCC 3.20 - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - *) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - esac - ;; - vxworks*) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - *) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; -esac -echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5 -echo "${ECHO_T}$ld_shlibs_CXX" >&6 -test "$ld_shlibs_CXX" = no && can_build_shared=no -GCC_CXX="$GXX" -LD_CXX="$LD" -cat > conftest.$ac_ext <&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - # Parse the compiler output and extract the necessary - # objects, libraries and library flags. - # Sentinel used to keep track of whether or not we are before - # the conftest object file. - pre_test_object_deps_done=no - # The `*' in the case matches for architectures that use `case' in - # $output_verbose_cmd can trigger glob expansion during the loop - # eval without this substitution. - output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"` - for p in `eval $output_verbose_link_cmd`; do - case $p in - -L* | -R* | -l*) - # Some compilers place space between "-{L,R}" and the path. - # Remove the space. - if test $p = "-L" \ - || test $p = "-R"; then - prev=$p - continue - else - prev= - fi - if test "$pre_test_object_deps_done" = no; then - case $p in - -L* | -R*) - # Internal compiler library paths should come after those - # provided the user. The postdeps already come after the - # user supplied libs so there is no need to process them. - if test -z "$compiler_lib_search_path_CXX"; then - compiler_lib_search_path_CXX="${prev}${p}" - else - compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}" - fi - ;; - # The "-l" case would never come before the object being - # linked, so don't bother handling this case. - esac - else - if test -z "$postdeps_CXX"; then - postdeps_CXX="${prev}${p}" - else - postdeps_CXX="${postdeps_CXX} ${prev}${p}" - fi - fi - ;; - *.$objext) - # This assumes that the test object file only shows up - # once in the compiler output. - if test "$p" = "conftest.$objext"; then - pre_test_object_deps_done=yes - continue - fi - if test "$pre_test_object_deps_done" = no; then - if test -z "$predep_objects_CXX"; then - predep_objects_CXX="$p" - else - predep_objects_CXX="$predep_objects_CXX $p" - fi - else - if test -z "$postdep_objects_CXX"; then - postdep_objects_CXX="$p" - else - postdep_objects_CXX="$postdep_objects_CXX $p" - fi - fi - ;; - *) ;; # Ignore the rest. - esac - done - # Clean up. - rm -f a.out a.exe -else - echo "libtool.m4: error: problem compiling CXX test program" -fi -$rm -f confest.$objext -# PORTME: override above test on systems where it is broken -case $host_os in -solaris*) - case $cc_basename in - CC*) - # Adding this requires a known-good setup of shared libraries for - # Sun compiler versions before 5.6, else PIC objects from an old - # archive will be linked into the output, leading to subtle bugs. - postdeps_CXX='-lCstd -lCrun' - ;; - esac -esac -case " $postdeps_CXX " in -*" -lc "*) archive_cmds_need_lc_CXX=no ;; -esac -lt_prog_compiler_wl_CXX= -lt_prog_compiler_pic_CXX= -lt_prog_compiler_static_CXX= -echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 -echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 - # C++ specific cases for pic, static, wl, etc. - if test "$GXX" = yes; then - lt_prog_compiler_wl_CXX='-Wl,' - lt_prog_compiler_static_CXX='-static' - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static_CXX='-Bstatic' - fi - ;; - amigaos*) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4' - ;; - beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - mingw* | os2* | pw32*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_prog_compiler_pic_CXX='-DDLL_EXPORT' - ;; - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - lt_prog_compiler_pic_CXX='-fno-common' - ;; - *djgpp*) - # DJGPP does not support shared libraries at all - lt_prog_compiler_pic_CXX= - ;; - sysv4*MP*) - if test -d /usr/nec; then - lt_prog_compiler_pic_CXX=-Kconform_pic - fi - ;; - hpux*) - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - ;; - *) - lt_prog_compiler_pic_CXX='-fPIC' - ;; - esac - ;; - *) - lt_prog_compiler_pic_CXX='-fPIC' - ;; - esac - else - case $host_os in - aix4* | aix5*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static_CXX='-Bstatic' - else - lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp' - fi - ;; - chorus*) - case $cc_basename in - cxch68*) - # Green Hills C++ Compiler - # _LT_AC_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" - ;; - esac - ;; - darwin*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - case $cc_basename in - xlc*) - lt_prog_compiler_pic_CXX='-qnocommon' - lt_prog_compiler_wl_CXX='-Wl,' - ;; - esac - ;; - dgux*) - case $cc_basename in - ec++*) - lt_prog_compiler_pic_CXX='-KPIC' - ;; - ghcx*) - # Green Hills C++ Compiler - lt_prog_compiler_pic_CXX='-pic' - ;; - *) - ;; - esac - ;; - freebsd* | kfreebsd*-gnu | dragonfly*) - # FreeBSD uses GNU C++ - ;; - hpux9* | hpux10* | hpux11*) - case $cc_basename in - CC*) - lt_prog_compiler_wl_CXX='-Wl,' - lt_prog_compiler_static_CXX="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" - if test "$host_cpu" != ia64; then - lt_prog_compiler_pic_CXX='+Z' - fi - ;; - aCC*) - lt_prog_compiler_wl_CXX='-Wl,' - lt_prog_compiler_static_CXX="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic_CXX='+Z' - ;; - esac - ;; - *) - ;; - esac - ;; - irix5* | irix6* | nonstopux*) - case $cc_basename in - CC*) - lt_prog_compiler_wl_CXX='-Wl,' - lt_prog_compiler_static_CXX='-non_shared' - # CC pic flag -KPIC is the default. - ;; - *) - ;; - esac - ;; - linux*) - case $cc_basename in - KCC*) - # KAI C++ Compiler - lt_prog_compiler_wl_CXX='--backend -Wl,' - lt_prog_compiler_pic_CXX='-fPIC' - ;; - icpc* | ecpc*) - # Intel C++ - lt_prog_compiler_wl_CXX='-Wl,' - lt_prog_compiler_pic_CXX='-KPIC' - lt_prog_compiler_static_CXX='-static' - ;; - pgCC*) - # Portland Group C++ compiler. - lt_prog_compiler_wl_CXX='-Wl,' - lt_prog_compiler_pic_CXX='-fpic' - lt_prog_compiler_static_CXX='-Bstatic' - ;; - cxx*) - # Compaq C++ - # Make sure the PIC flag is empty. It appears that all Alpha - # Linux and Compaq Tru64 Unix objects are PIC. - lt_prog_compiler_pic_CXX= - lt_prog_compiler_static_CXX='-non_shared' - ;; - *) - ;; - esac - ;; - lynxos*) - ;; - m88k*) - ;; - mvs*) - case $cc_basename in - cxx*) - lt_prog_compiler_pic_CXX='-W c,exportall' - ;; - *) - ;; - esac - ;; - netbsd*) - ;; - osf3* | osf4* | osf5*) - case $cc_basename in - KCC*) - lt_prog_compiler_wl_CXX='--backend -Wl,' - ;; - RCC*) - # Rational C++ 2.4.1 - lt_prog_compiler_pic_CXX='-pic' - ;; - cxx*) - # Digital/Compaq C++ - lt_prog_compiler_wl_CXX='-Wl,' - # Make sure the PIC flag is empty. It appears that all Alpha - # Linux and Compaq Tru64 Unix objects are PIC. - lt_prog_compiler_pic_CXX= - lt_prog_compiler_static_CXX='-non_shared' - ;; - *) - ;; - esac - ;; - psos*) - ;; - sco*) - case $cc_basename in - CC*) - lt_prog_compiler_pic_CXX='-fPIC' - ;; - *) - ;; - esac - ;; - solaris*) - case $cc_basename in - CC*) - # Sun C++ 4.2, 5.x and Centerline C++ - lt_prog_compiler_pic_CXX='-KPIC' - lt_prog_compiler_static_CXX='-Bstatic' - lt_prog_compiler_wl_CXX='-Qoption ld ' - ;; - gcx*) - # Green Hills C++ Compiler - lt_prog_compiler_pic_CXX='-PIC' - ;; - *) - ;; - esac - ;; - sunos4*) - case $cc_basename in - CC*) - # Sun C++ 4.x - lt_prog_compiler_pic_CXX='-pic' - lt_prog_compiler_static_CXX='-Bstatic' - ;; - lcc*) - # Lucid - lt_prog_compiler_pic_CXX='-pic' - ;; - *) - ;; - esac - ;; - tandem*) - case $cc_basename in - NCC*) - # NonStop-UX NCC 3.20 - lt_prog_compiler_pic_CXX='-KPIC' - ;; - *) - ;; - esac - ;; - unixware*) - ;; - vxworks*) - ;; - *) - lt_prog_compiler_can_build_shared_CXX=no - ;; - esac - fi -echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_CXX" >&5 -echo "${ECHO_T}$lt_prog_compiler_pic_CXX" >&6 -# -# Check to make sure the PIC flag actually works. -# -if test -n "$lt_prog_compiler_pic_CXX"; then -echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5 -echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... $ECHO_C" >&6 -if test "${lt_prog_compiler_pic_works_CXX+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_prog_compiler_pic_works_CXX=no - ac_outfile=conftest.$ac_objext - printf "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:11390: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 - echo "$as_me:11394: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $echo "X$_lt_compiler_boilerplate" | $Xsed >conftest.exp - $SED '/^$/d' conftest.err >conftest.er2 - if test ! -s conftest.err || diff conftest.exp conftest.er2 >/dev/null; then - lt_prog_compiler_pic_works_CXX=yes - fi - fi - $rm conftest* -fi -echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_CXX" >&5 -echo "${ECHO_T}$lt_prog_compiler_pic_works_CXX" >&6 -if test x"$lt_prog_compiler_pic_works_CXX" = xyes; then - case $lt_prog_compiler_pic_CXX in - "" | " "*) ;; - *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;; - esac -else - lt_prog_compiler_pic_CXX= - lt_prog_compiler_can_build_shared_CXX=no -fi -fi -case $host_os in - # For platforms which do not support PIC, -DPIC is meaningless: - *djgpp*) - lt_prog_compiler_pic_CXX= - ;; - *) - lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC" - ;; -esac -echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 -echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 -if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_cv_prog_compiler_c_o_CXX=no - $rm -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - printf "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:11452: $lt_compile\"" >&5) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&5 - echo "$as_me:11456: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $echo "X$_lt_compiler_boilerplate" | $Xsed > out/conftest.exp - $SED '/^$/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.err || diff out/conftest.exp out/conftest.er2 >/dev/null; then - lt_cv_prog_compiler_c_o_CXX=yes - fi - fi - chmod u+w . 2>&5 - $rm conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files - $rm out/* && rmdir out - cd .. - rmdir conftest - $rm conftest* -fi -echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5 -echo "${ECHO_T}$lt_cv_prog_compiler_c_o_CXX" >&6 -hard_links="nottested" -if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 -echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6 - hard_links=yes - $rm conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - echo "$as_me:$LINENO: result: $hard_links" >&5 -echo "${ECHO_T}$hard_links" >&6 - if test "$hard_links" = no; then - { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 -echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} - need_locks=warn - fi -else - need_locks=no -fi -echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 -echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 - export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - case $host_os in - aix4* | aix5*) - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - if $NM -V 2>&1 | grep 'GNU' > /dev/null; then - export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' - else - export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' - fi - ;; - pw32*) - export_symbols_cmds_CXX="$ltdll_cmds" - ;; - cygwin* | mingw*) - export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/;/^.* __nm__/s/^.* __nm__\([^ ]*\) [^ ]*/\1 DATA/;/^I /d;/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' - ;; - *) - export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - ;; - esac -echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5 -echo "${ECHO_T}$ld_shlibs_CXX" >&6 -test "$ld_shlibs_CXX" = no && can_build_shared=no -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi -# -# Do we need to explicitly link libc? -# -case "x$archive_cmds_need_lc_CXX" in -x|xyes) - # Assume -lc should be added - archive_cmds_need_lc_CXX=yes - if test "$enable_shared" = yes && test "$GCC" = yes; then - case $archive_cmds_CXX in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 -echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6 - $rm conftest* - printf "$lt_simple_compile_test_code" > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$lt_prog_compiler_wl_CXX - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$allow_undefined_flag_CXX - allow_undefined_flag_CXX= - if { (eval echo "$as_me:$LINENO: \"$archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 - (eval $archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } - then - archive_cmds_need_lc_CXX=no - else - archive_cmds_need_lc_CXX=yes - fi - allow_undefined_flag_CXX=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $rm conftest* - echo "$as_me:$LINENO: result: $archive_cmds_need_lc_CXX" >&5 -echo "${ECHO_T}$archive_cmds_need_lc_CXX" >&6 - ;; - esac - fi - ;; -esac -echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 -echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 +$as_echo_n "checking dynamic linker characteristics... " >&6; } + +if test "$GCC" = yes; then + case $host_os in + darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; + *) lt_awk_arg="/^libraries:/" ;; + esac + case $host_os in + mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;; + *) lt_sed_strip_eq="s,=/,/,g" ;; + esac + lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` + case $lt_search_path_spec in + *\;*) + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` + ;; + *) + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` + ;; + esac + # Ok, now we have the path, separated by spaces, we can step through it + # and add multilib dir if necessary. + lt_tmp_lt_search_path_spec= + lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` + for lt_sys_path in $lt_search_path_spec; do + if test -d "$lt_sys_path/$lt_multi_os_dir"; then + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" + else + test -d "$lt_sys_path" && \ + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" + fi + done + lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' +BEGIN {RS=" "; FS="/|\n";} { + lt_foo=""; + lt_count=0; + for (lt_i = NF; lt_i > 0; lt_i--) { + if ($lt_i != "" && $lt_i != ".") { + if ($lt_i == "..") { + lt_count++; + } else { + if (lt_count == 0) { + lt_foo="/" $lt_i lt_foo; + } else { + lt_count--; + } + } + } + } + if (lt_foo != "") { lt_freq[lt_foo]++; } + if (lt_freq[lt_foo] == 1) { print lt_foo; } +}'` + # AWK program above erroneously prepends '/' to C:/dos/paths + # for these hosts. + case $host_os in + mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ + $SED 's,/\([A-Za-z]:\),\1,g'` ;; + esac + sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` +else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi library_names_spec= libname_spec='lib$name' soname_spec= @@ -11612,20 +10461,6 @@ shlibpath_overrides_runpath=unknown version_type=none dynamic_linker="$host_os ld.so" sys_lib_dlsearch_path_spec="/lib /usr/lib" -if test "$GCC" = yes; then - sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` - if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then - # if the path contains ";" then we assume it to be the separator - # otherwise default to the standard path separator (i.e. ":") - it is - # assumed that no part of a normal pathname contains ";" but that should - # okay in the real world where ";" in dirpaths is itself problematic. - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi -else - sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" -fi need_lib_prefix=unknown hardcode_into_libs=no @@ -11635,7 +10470,7 @@ need_version=unknown case $host_os in aix3*) - version_type=linux + version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' shlibpath_var=LIBPATH @@ -11643,8 +10478,8 @@ aix3*) soname_spec='${libname}${release}${shared_ext}$major' ;; -aix4* | aix5*) - version_type=linux +aix[4-9]*) + version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no hardcode_into_libs=yes @@ -11662,7 +10497,7 @@ aix4* | aix5*) aix4 | aix4.[01] | aix4.[01].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' - echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then + echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then : else can_build_shared=no @@ -11688,9 +10523,18 @@ aix4* | aix5*) ;; amigaos*) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + case $host_cpu in + powerpc) + # Since July 2007 AmigaOS4 officially supports .so libraries. + # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + ;; + m68k) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + esac ;; beos*) @@ -11700,7 +10544,7 @@ beos*) ;; bsdi[45]*) - version_type=linux + version_type=linux # correct to gnu/linux during the next big refactor need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' @@ -11713,85 +10557,112 @@ bsdi[45]*) # libtool to hard-code these into programs ;; -cygwin* | mingw* | pw32*) +cygwin* | mingw* | pw32* | cegcc*) version_type=windows shrext_cmds=".dll" need_version=no need_lib_prefix=no - case $GCC,$host_os in - yes,cygwin* | yes,mingw* | yes,pw32*) + case $GCC,$cc_basename in + yes,*) + # gcc library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname~ - chmod a+x \$dldir/$dlname' + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ - $rm \$dlpath' + $RM \$dlpath' shlibpath_overrides_runpath=yes case $host_os in cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" + + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api" ;; - mingw*) + mingw* | cegcc*) # MinGW DLLs use traditional 'lib' prefix soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` - if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then - # It is most probably a Windows format PATH printed by - # mingw gcc, but we are running on Cygwin. Gcc prints its search - # path with ; separators, and with drive letters. We can handle the - # drive letters (cygwin fileutils understands them), so leave them, - # especially as we might pass files found there to a mingw objdump, - # which wouldn't understand a cygwinified path. Ahh. - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; esac + dynamic_linker='Win32 ld.exe' ;; - linux*) - if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - supports_anon_versioning=no - case `$LD -v 2>/dev/null` in - *\ 01.* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 - *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... - *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... - *\ 2.11.*) ;; # other 2.11 versions - *) supports_anon_versioning=yes ;; - esac - if test $supports_anon_versioning = yes; then - archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~ -cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ -$echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + *,cl*) + # Native MSVC + libname_spec='$name' + soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + library_names_spec='${libname}.dll.lib' + + case $build_os in + mingw*) + sys_lib_search_path_spec= + lt_save_ifs=$IFS + IFS=';' + for lt_path in $LIB + do + IFS=$lt_save_ifs + # Let DOS variable expansion print the short 8.3 style file name. + lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` + sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" + done + IFS=$lt_save_ifs + # Convert to MSYS style. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'` + ;; + cygwin*) + # Convert to unix form, then to dos form, then back to unix form + # but this time dos style (no spaces!) so that the unix form looks + # like /cygdrive/c/PROGRA~1:/cygdr... + sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` + sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` + sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + ;; + *) + sys_lib_search_path_spec="$LIB" + if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then + # It is most probably a Windows format PATH. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` else - $archive_expsym_cmds="$archive_cmds" + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi - else - ld_shlibs=no - fi + # FIXME: find the short name or the path components, as spaces are + # common. (e.g. "Program Files" -> "PROGRA~1") + ;; + esac + + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + dynamic_linker='Win32 link.exe' ;; *) + # Assume MSVC wrapper library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' + dynamic_linker='Win32 ld.exe' ;; esac - dynamic_linker='Win32 ld.exe' # FIXME: first we should search . and the directory the executable is in shlibpath_var=PATH ;; @@ -11801,22 +10672,18 @@ darwin* | rhapsody*) version_type=darwin need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' + library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' soname_spec='${libname}${release}${major}$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' - # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. - if test "$GCC" = yes; then - sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` - else - sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' - fi + + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ;; dgux*) - version_type=linux + version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' @@ -11824,22 +10691,6 @@ dgux*) shlibpath_var=LD_LIBRARY_PATH ;; -freebsd1*) - dynamic_linker=no - ;; - -kfreebsd*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='GNU ld.so' - ;; - freebsd* | dragonfly*) # DragonFly does not have aout. When/if they implement a new # versioning mechanism, adjust this. @@ -11847,7 +10698,7 @@ freebsd* | dragonfly*) objformat=`/usr/bin/objformat` else case $host_os in - freebsd[123]*) objformat=aout ;; + freebsd[23].*) objformat=aout ;; *) objformat=elf ;; esac fi @@ -11865,27 +10716,46 @@ freebsd* | dragonfly*) esac shlibpath_var=LD_LIBRARY_PATH case $host_os in - freebsd2*) + freebsd2.*) shlibpath_overrides_runpath=yes ;; freebsd3.[01]* | freebsdelf3.[01]*) shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; - *) # from 3.2 on + freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ + freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; + *) # from 4.6 on, and DragonFly + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; esac ;; gnu*) - version_type=linux + version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +haiku*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + dynamic_linker="$host_os runtime_loader" + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LIBRARY_PATH + shlibpath_overrides_runpath=yes + sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' hardcode_into_libs=yes ;; @@ -11911,18 +10781,18 @@ hpux9* | hpux10* | hpux11*) fi sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; - hppa*64*) - shrext_cmds='.sl' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.sl" - shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - *) + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) shrext_cmds='.sl' dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH @@ -11931,8 +10801,22 @@ hpux9* | hpux10* | hpux11*) soname_spec='${libname}${release}${shared_ext}$major' ;; esac - # HP-UX runs *really* slowly unless shared libraries are mode 555. + # HP-UX runs *really* slowly unless shared libraries are mode 555, ... postinstall_cmds='chmod 555 $lib' + # or fails outright, so override atomically: + install_override_mode=555 + ;; + +interix[3-9]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes ;; irix5* | irix6* | nonstopux*) @@ -11940,7 +10824,7 @@ irix5* | irix6* | nonstopux*) nonstopux*) version_type=nonstopux ;; *) if test "$lt_cv_prog_gnu_ld" = yes; then - version_type=linux + version_type=linux # correct to gnu/linux during the next big refactor else version_type=irix fi ;; @@ -11977,9 +10861,9 @@ linux*oldld* | linux*aout* | linux*coff* dynamic_linker=no ;; -# This must be Linux ELF. -linux*) - version_type=linux +# This must be glibc/ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu) + version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' @@ -11987,6 +10871,41 @@ linux*) finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no + + # Some binutils ld are patched to set DT_RUNPATH + if ${lt_cv_shlibpath_overrides_runpath+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_shlibpath_overrides_runpath=no + save_LDFLAGS=$LDFLAGS + save_libdir=$libdir + eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ + LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : + lt_cv_shlibpath_overrides_runpath=yes +fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$save_LDFLAGS + libdir=$save_libdir + +fi + + shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath + # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. @@ -11994,17 +10913,10 @@ linux*) # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" fi - case $host_cpu:$lt_cv_cc_64bit_output in - powerpc64:yes | s390x:yes | sparc64:yes | x86_64:yes) - sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /usr/X11R6/lib64" - sys_lib_search_path_spec="/lib64 /usr/lib64 /usr/local/lib64 /usr/X11R6/lib64" - ;; - esac - # We used to test for /lib/ld.so.1 and disable shared libraries on # powerpc, because MkLinux only supported shared libraries with the # GNU dynamic linker. Since this was broken with cross compilers, @@ -12012,33 +10924,9 @@ linux*) # people can always --disable-shared, the test was removed, and we # assume the GNU/Linux dynamic linker is in use. dynamic_linker='GNU/Linux ld.so' + ;; - # Find out which ABI we are using (multilib Linux x86_64 hack). - libsuff= - case "$host_cpu" in - x86_64*) - echo '#line 12020 "configure"' > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - case `/usr/bin/file conftest.$ac_objext` in - *64-bit*) - libsuff=64 - ;; - esac - fi - rm -rf conftest* - ;; - *) - ;; - esac - sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}" - sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" - ;; - -knetbsd*-gnu) +netbsdelf*-gnu) version_type=linux need_lib_prefix=no need_version=no @@ -12047,14 +10935,14 @@ knetbsd*-gnu) shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes - dynamic_linker='GNU ld.so' + dynamic_linker='NetBSD ld.elf_so' ;; netbsd*) version_type=sunos need_lib_prefix=no need_version=no - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' @@ -12069,34 +10957,37 @@ netbsd*) ;; newsos6) - version_type=linux + version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; -nto-qnx*) - version_type=linux +*nto* | *qnx*) + version_type=qnx need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='ldqnx.so' ;; openbsd*) version_type=sunos + sys_lib_dlsearch_path_spec="/usr/lib" need_lib_prefix=no # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. case $host_os in - openbsd3.3 | openbsd3.3.*) need_version=yes ;; - *) need_version=no ;; + openbsd3.3 | openbsd3.3.*) need_version=yes ;; + *) need_version=no ;; esac library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then case $host_os in openbsd2.[89] | openbsd2.[89].*) shlibpath_overrides_runpath=no @@ -12130,15 +11021,12 @@ osf3* | osf4* | osf5*) sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ;; -sco3.2v5*) - version_type=osf - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH +rdos*) + dynamic_linker=no ;; solaris*) - version_type=linux + version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' @@ -12162,8 +11050,8 @@ sunos4*) need_version=yes ;; -sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - version_type=linux +sysv4 | sysv4.3*) + version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH @@ -12171,7 +11059,6 @@ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) sni) shlibpath_overrides_runpath=no need_lib_prefix=no - export_dynamic_flag_spec='${wl}-Blargedynsym' runpath_var=LD_RUN_PATH ;; siemens) @@ -12188,15 +11075,48 @@ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) sysv4*MP*) if test -d /usr/nec ;then - version_type=linux + version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' soname_spec='$libname${shared_ext}.$major' shlibpath_var=LD_LIBRARY_PATH fi ;; +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + version_type=freebsd-elf + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + if test "$with_gnu_ld" = yes; then + sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' + else + sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' + case $host_os in + sco3.2v5*) + sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" + ;; + esac + fi + sys_lib_dlsearch_path_spec='/usr/lib' + ;; + +tpf*) + # TPF is a cross-target only. Preferred cross-host = GNU/Linux. + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + uts4*) - version_type=linux + version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH @@ -12206,39 +11126,143 @@ uts4*) dynamic_linker=no ;; esac -echo "$as_me:$LINENO: result: $dynamic_linker" >&5 -echo "${ECHO_T}$dynamic_linker" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 +$as_echo "$dynamic_linker" >&6; } test "$dynamic_linker" = no && can_build_shared=no -echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 -echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 -hardcode_action_CXX= -if test -n "$hardcode_libdir_flag_spec_CXX" || \ - test -n "$runpath_var_CXX" || \ - test "X$hardcode_automatic_CXX" = "Xyes" ; then +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi - # We can hardcode non-existant directories. - if test "$hardcode_direct_CXX" != no && +if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then + sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" +fi +if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then + sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" +fi + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 +$as_echo_n "checking how to hardcode library paths into programs... " >&6; } +hardcode_action= +if test -n "$hardcode_libdir_flag_spec" || + test -n "$runpath_var" || + test "X$hardcode_automatic" = "Xyes" ; then + + # We can hardcode non-existent directories. + if test "$hardcode_direct" != no && # If the only mechanism to avoid hardcoding is shlibpath_var, we # have to relink, otherwise we might link with an installed library # when we should be linking with a yet-to-be-installed one - ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, CXX)" != no && - test "$hardcode_minus_L_CXX" != no; then + ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no && + test "$hardcode_minus_L" != no; then # Linking always hardcodes the temporary library directory. - hardcode_action_CXX=relink + hardcode_action=relink else # We can link without hardcoding, and we can hardcode nonexisting dirs. - hardcode_action_CXX=immediate + hardcode_action=immediate fi else # We cannot hardcode anything, or else we can only hardcode existing # directories. - hardcode_action_CXX=unsupported + hardcode_action=unsupported fi -echo "$as_me:$LINENO: result: $hardcode_action_CXX" >&5 -echo "${ECHO_T}$hardcode_action_CXX" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5 +$as_echo "$hardcode_action" >&6; } -if test "$hardcode_action_CXX" = relink; then +if test "$hardcode_action" = relink || + test "$inherit_rpath" = yes; then # Fast installation is not supported enable_fast_install=no elif test "$shlibpath_overrides_runpath" = yes || @@ -12247,36 +11271,12 @@ elif test "$shlibpath_overrides_runpath" enable_fast_install=needless fi -striplib= -old_striplib= -echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 -echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6 -if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 -else -# FIXME - insert some real tests, host_os isn't really good enough - case $host_os in - darwin*) - if test -n "$STRIP" ; then - striplib="$STRIP -x" - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - ;; - *) - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - ;; - esac -fi -if test "x$enable_dlopen" != xyes; then + + + + + if test "x$enable_dlopen" != xyes; then enable_dlopen=unknown enable_dlopen_self=unknown enable_dlopen_self_static=unknown @@ -12291,83 +11291,55 @@ else lt_cv_dlopen_self=yes ;; - mingw* | pw32*) + mingw* | pw32* | cegcc*) lt_cv_dlopen="LoadLibrary" lt_cv_dlopen_libs= - ;; + ;; cygwin*) lt_cv_dlopen="dlopen" lt_cv_dlopen_libs= - ;; + ;; darwin*) # if libdl is installed we need to link against it - echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 -echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 -if test "${ac_cv_lib_dl_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 +$as_echo_n "checking for dlopen in -ldl... " >&6; } +if ${ac_cv_lib_dl_dlopen+:} false; then : + $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldl $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char dlopen (); int main () { -dlopen (); +return dlopen (); ; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_dl_dlopen=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_dl_dlopen=no + ac_cv_lib_dl_dlopen=no fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 -echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 -if test $ac_cv_lib_dl_dlopen = yes; then +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 +$as_echo "$ac_cv_lib_dl_dlopen" >&6; } +if test "x$ac_cv_lib_dl_dlopen" = xyes; then : lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" else @@ -12377,462 +11349,172 @@ else fi - ;; + ;; *) - echo "$as_me:$LINENO: checking for shl_load" >&5 -echo $ECHO_N "checking for shl_load... $ECHO_C" >&6 -if test "${ac_cv_func_shl_load+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load" +if test "x$ac_cv_func_shl_load" = xyes; then : + lt_cv_dlopen="shl_load" else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5 +$as_echo_n "checking for shl_load in -ldld... " >&6; } +if ${ac_cv_lib_dld_shl_load+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -/* Define shl_load to an innocuous variant, in case declares shl_load. - For example, HP-UX 11i declares gettimeofday. */ -#define shl_load innocuous_shl_load - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char shl_load (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef shl_load -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" -{ #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char shl_load (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_shl_load) || defined (__stub___shl_load) -choke me -#else -char (*f) () = shl_load; -#endif -#ifdef __cplusplus -} -#endif - int main () { -return f != shl_load; +return shl_load (); ; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_shl_load=yes +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dld_shl_load=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_func_shl_load=no + ac_cv_lib_dld_shl_load=no fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 -echo "${ECHO_T}$ac_cv_func_shl_load" >&6 -if test $ac_cv_func_shl_load = yes; then - lt_cv_dlopen="shl_load" +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5 +$as_echo "$ac_cv_lib_dld_shl_load" >&6; } +if test "x$ac_cv_lib_dld_shl_load" = xyes; then : + lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" else - echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 -echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6 -if test "${ac_cv_lib_dld_shl_load+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen" +if test "x$ac_cv_func_dlopen" = xyes; then : + lt_cv_dlopen="dlopen" +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 +$as_echo_n "checking for dlopen in -ldl... " >&6; } +if ${ac_cv_lib_dl_dlopen+:} false; then : + $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +LIBS="-ldl $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char shl_load (); +char dlopen (); int main () { -shl_load (); +return dlopen (); ; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_dld_shl_load=yes +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dl_dlopen=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_dld_shl_load=no + ac_cv_lib_dl_dlopen=no fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 -echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6 -if test $ac_cv_lib_dld_shl_load = yes; then - lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld" -else - echo "$as_me:$LINENO: checking for dlopen" >&5 -echo $ECHO_N "checking for dlopen... $ECHO_C" >&6 -if test "${ac_cv_func_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 +$as_echo "$ac_cv_lib_dl_dlopen" >&6; } +if test "x$ac_cv_lib_dl_dlopen" = xyes; then : + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5 +$as_echo_n "checking for dlopen in -lsvld... " >&6; } +if ${ac_cv_lib_svld_dlopen+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lsvld $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -/* Define dlopen to an innocuous variant, in case declares dlopen. - For example, HP-UX 11i declares gettimeofday. */ -#define dlopen innocuous_dlopen -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char dlopen (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef dlopen - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -{ -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dlopen (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_dlopen) || defined (__stub___dlopen) -choke me -#else -char (*f) () = dlopen; -#endif -#ifdef __cplusplus -} -#endif - -int -main () -{ -return f != dlopen; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_dlopen=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_func_dlopen=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 -echo "${ECHO_T}$ac_cv_func_dlopen" >&6 -if test $ac_cv_func_dlopen = yes; then - lt_cv_dlopen="dlopen" -else - echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 -echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 -if test "${ac_cv_lib_dl_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldl $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ -char dlopen (); -int -main () -{ -dlopen (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_dl_dlopen=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_dl_dlopen=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 -echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 -if test $ac_cv_lib_dl_dlopen = yes; then - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" -else - echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 -echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6 -if test "${ac_cv_lib_svld_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lsvld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char dlopen (); int main () { -dlopen (); +return dlopen (); ; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_svld_dlopen=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_svld_dlopen=no + ac_cv_lib_svld_dlopen=no fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 -echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6 -if test $ac_cv_lib_svld_dlopen = yes; then +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5 +$as_echo "$ac_cv_lib_svld_dlopen" >&6; } +if test "x$ac_cv_lib_svld_dlopen" = xyes; then : lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" else - echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 -echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6 -if test "${ac_cv_lib_dld_dld_link+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5 +$as_echo_n "checking for dld_link in -ldld... " >&6; } +if ${ac_cv_lib_dld_dld_link+:} false; then : + $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char dld_link (); int main () { -dld_link (); +return dld_link (); ; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_dld_dld_link=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_dld_dld_link=no + ac_cv_lib_dld_dld_link=no fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 -echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6 -if test $ac_cv_lib_dld_dld_link = yes; then - lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld" +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5 +$as_echo "$ac_cv_lib_dld_dld_link" >&6; } +if test "x$ac_cv_lib_dld_dld_link" = xyes; then : + lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" fi @@ -12865,23 +11547,23 @@ fi test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" save_LDFLAGS="$LDFLAGS" - eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" save_LIBS="$LIBS" LIBS="$lt_cv_dlopen_libs $LIBS" - echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 -echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6 -if test "${lt_cv_dlopen_self+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5 +$as_echo_n "checking whether a program can dlopen itself... " >&6; } +if ${lt_cv_dlopen_self+:} false; then : + $as_echo_n "(cached) " >&6 else if test "$cross_compiling" = yes; then : lt_cv_dlopen_self=cross else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown - cat > conftest.$ac_ext < conftest.$ac_ext <<_LT_EOF +#line $LINENO "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12922,11 +11604,13 @@ else # endif #endif -#ifdef __cplusplus -extern "C" void exit (int); +/* When -fvisbility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ +#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +int fnord () __attribute__((visibility("default"))); #endif -void fnord() { int i=42;} +int fnord () { return 42; } int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); @@ -12935,24 +11619,30 @@ int main () if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + else + { + if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + else puts (dlerror ()); + } /* dlclose (self); */ } + else + puts (dlerror ()); - exit (status); + return status; } -EOF - if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +_LT_EOF + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; - x$lt_unknown|x*) lt_cv_dlopen_self=no ;; + x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; esac else : # compilation failed @@ -12963,23 +11653,23 @@ rm -fr conftest* fi -echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 -echo "${ECHO_T}$lt_cv_dlopen_self" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5 +$as_echo "$lt_cv_dlopen_self" >&6; } if test "x$lt_cv_dlopen_self" = xyes; then - LDFLAGS="$LDFLAGS $link_static_flag" - echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 -echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6 -if test "${lt_cv_dlopen_self_static+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5 +$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } +if ${lt_cv_dlopen_self_static+:} false; then : + $as_echo_n "(cached) " >&6 else if test "$cross_compiling" = yes; then : lt_cv_dlopen_self_static=cross else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown - cat > conftest.$ac_ext < conftest.$ac_ext <<_LT_EOF +#line $LINENO "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -13020,11 +11710,13 @@ else # endif #endif -#ifdef __cplusplus -extern "C" void exit (int); +/* When -fvisbility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ +#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +int fnord () __attribute__((visibility("default"))); #endif -void fnord() { int i=42;} +int fnord () { return 42; } int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); @@ -13033,24 +11725,30 @@ int main () if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + else + { + if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + else puts (dlerror ()); + } /* dlclose (self); */ } + else + puts (dlerror ()); - exit (status); + return status; } -EOF - if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +_LT_EOF + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 (eval $ac_link) 2>&5 ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;; + x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; esac else : # compilation failed @@ -13061,8 +11759,8 @@ rm -fr conftest* fi -echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 -echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5 +$as_echo "$lt_cv_dlopen_self_static" >&6; } fi CPPFLAGS="$save_CPPFLAGS" @@ -13083,503 +11781,354 @@ echo "${ECHO_T}$lt_cv_dlopen_self_static fi -# The else clause should only fire when bootstrapping the -# libtool distribution, otherwise you forgot to ship ltmain.sh -# with your package, and you will get complaints that there are -# no rules to generate ltmain.sh. -if test -f "$ltmain"; then - # See if we are running on zsh, and set the options which allow our commands through - # without removal of \ escapes. - if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST - fi - # Now quote all the things that may contain metacharacters while being - # careful not to overquote the AC_SUBSTed values. We take copies of the - # variables and quote the copies for generation of the libtool script. - for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \ - SED SHELL STRIP \ - libname_spec library_names_spec soname_spec extract_expsyms_cmds \ - old_striplib striplib file_magic_cmd finish_cmds finish_eval \ - deplibs_check_method reload_flag reload_cmds need_locks \ - lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ - lt_cv_sys_global_symbol_to_c_name_address \ - sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ - old_postinstall_cmds old_postuninstall_cmds \ - compiler_CXX \ - CC_CXX \ - LD_CXX \ - lt_prog_compiler_wl_CXX \ - lt_prog_compiler_pic_CXX \ - lt_prog_compiler_static_CXX \ - lt_prog_compiler_no_builtin_flag_CXX \ - export_dynamic_flag_spec_CXX \ - thread_safe_flag_spec_CXX \ - whole_archive_flag_spec_CXX \ - enable_shared_with_static_runtimes_CXX \ - old_archive_cmds_CXX \ - old_archive_from_new_cmds_CXX \ - predep_objects_CXX \ - postdep_objects_CXX \ - predeps_CXX \ - postdeps_CXX \ - compiler_lib_search_path_CXX \ - archive_cmds_CXX \ - archive_expsym_cmds_CXX \ - postinstall_cmds_CXX \ - postuninstall_cmds_CXX \ - old_archive_from_expsyms_cmds_CXX \ - allow_undefined_flag_CXX \ - no_undefined_flag_CXX \ - export_symbols_cmds_CXX \ - hardcode_libdir_flag_spec_CXX \ - hardcode_libdir_flag_spec_ld_CXX \ - hardcode_libdir_separator_CXX \ - hardcode_automatic_CXX \ - module_cmds_CXX \ - module_expsym_cmds_CXX \ - lt_cv_prog_compiler_c_o_CXX \ - exclude_expsyms_CXX \ - include_expsyms_CXX; do - - case $var in - old_archive_cmds_CXX | \ - old_archive_from_new_cmds_CXX | \ - archive_cmds_CXX | \ - archive_expsym_cmds_CXX | \ - module_cmds_CXX | \ - module_expsym_cmds_CXX | \ - old_archive_from_expsyms_cmds_CXX | \ - export_symbols_cmds_CXX | \ - extract_expsyms_cmds | reload_cmds | finish_cmds | \ - postinstall_cmds | postuninstall_cmds | \ - old_postinstall_cmds | old_postuninstall_cmds | \ - sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) - # Double-quote double-evaled strings. - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" - ;; - *) - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" - ;; - esac - done - - case $lt_echo in - *'\$0 --fallback-echo"') - lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` - ;; - esac - -cfgfile="$ofile" - cat <<__EOF__ >> "$cfgfile" -# ### BEGIN LIBTOOL TAG CONFIG: $tagname -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared -# Whether or not to build static libraries. -build_old_libs=$enable_static -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$archive_cmds_need_lc_CXX -# Whether or not to disallow shared libs when runtime libs are static -allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install -# The host system. -host_alias=$host_alias -host=$host -host_os=$host_os -# The build system. -build_alias=$build_alias -build=$build -build_os=$build_os -# An echo program that does not interpret backslashes. -echo=$lt_echo -# The archiver. -AR=$lt_AR -AR_FLAGS=$lt_AR_FLAGS -# A C compiler. -LTCC=$lt_LTCC -# A language-specific compiler. -CC=$lt_compiler_CXX -# Is the compiler the GNU C compiler? -with_gcc=$GCC_CXX +striplib= +old_striplib= +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5 +$as_echo_n "checking whether stripping libraries is possible... " >&6; } +if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else +# FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP" ; then + striplib="$STRIP -x" + old_striplib="$STRIP -S" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + fi + ;; + *) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + ;; + esac +fi -# An ERE matcher. -EGREP=$lt_EGREP -# The linker used to build libraries. -LD=$lt_LD_CXX -# Whether we need hard or soft links. -LN_S=$lt_LN_S -# A BSD-compatible nm program. -NM=$lt_NM -# A symbol stripping program -STRIP=$lt_STRIP -# Used to examine libraries when file_magic_cmd begins "file" -MAGIC_CMD=$MAGIC_CMD -# Used on cygwin: DLL creation program. -DLLTOOL="$DLLTOOL" -# Used on cygwin: object dumper. -OBJDUMP="$OBJDUMP" -# Used on cygwin: assembler. -AS="$AS" -# The name of the directory that contains temporary libtool files. -objdir=$objdir -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds -# How to pass a linker flag through the compiler. -wl=$lt_lt_prog_compiler_wl_CXX + # Report which library types will actually be built + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5 +$as_echo_n "checking if libtool supports shared libraries... " >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5 +$as_echo "$can_build_shared" >&6; } -# Object file suffix (normally "o"). -objext="$ac_objext" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5 +$as_echo_n "checking whether to build shared libraries... " >&6; } + test "$can_build_shared" = "no" && enable_shared=no -# Old archive suffix (normally "a"). -libext="$libext" + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; -# Shared library suffix (normally ".so"). -shrext_cmds='$shrext_cmds' + aix[4-9]*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; + esac + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5 +$as_echo "$enable_shared" >&6; } -# Executable file suffix (normally ""). -exeext="$exeext" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5 +$as_echo_n "checking whether to build static libraries... " >&6; } + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5 +$as_echo "$enable_static" >&6; } -# Additional compiler flags for building library objects. -pic_flag=$lt_lt_prog_compiler_pic_CXX -pic_mode=$pic_mode -# What is the maximum length of a command? -max_cmd_len=$lt_cv_sys_max_cmd_len -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX -# Must we lock files when doing compilation? -need_locks=$lt_need_locks +fi +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu -# Do we need the lib prefix for modules? -need_lib_prefix=$need_lib_prefix +CC="$lt_save_CC" -# Do we need a version for libraries? -need_version=$need_version + if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + ac_ext=cpp +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C++ preprocessor" >&5 +$as_echo_n "checking how to run the C++ preprocessor... " >&6; } +if test -z "$CXXCPP"; then + if ${ac_cv_prog_CXXCPP+:} false; then : + $as_echo_n "(cached) " >&6 +else + # Double quotes because CXXCPP needs to be expanded + for CXXCPP in "$CXX -E" "/lib/cpp" + do + ac_preproc_ok=false +for ac_cxx_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if ac_fn_cxx_try_cpp "$LINENO"; then : -# Whether dlopen is supported. -dlopen_support=$enable_dlopen +else + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.i conftest.$ac_ext -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if ac_fn_cxx_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue +else + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.i conftest.$ac_ext -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : + break +fi -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_lt_prog_compiler_static_CXX + done + ac_cv_prog_CXXCPP=$CXXCPP -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX - -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX - -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX - -# Compiler flag to generate thread-safe objects. -thread_safe_flag_spec=$lt_thread_safe_flag_spec_CXX - -# Library versioning type. -version_type=$version_type - -# Format of library name prefix. -libname_spec=$lt_libname_spec - -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME. -library_names_spec=$lt_library_names_spec - -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec - -# Commands used to build and install an old-style archive. -RANLIB=$lt_RANLIB -old_archive_cmds=$lt_old_archive_cmds_CXX -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds - -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX - -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX - -# Commands used to build and install a shared archive. -archive_cmds=$lt_archive_cmds_CXX -archive_expsym_cmds=$lt_archive_expsym_cmds_CXX -postinstall_cmds=$lt_postinstall_cmds -postuninstall_cmds=$lt_postuninstall_cmds - -# Commands used to build a loadable module (assumed same as above if empty) -module_cmds=$lt_module_cmds_CXX -module_expsym_cmds=$lt_module_expsym_cmds_CXX - -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib - -# Dependencies to place before the objects being linked to create a -# shared library. -predep_objects=$lt_predep_objects_CXX - -# Dependencies to place after the objects being linked to create a -# shared library. -postdep_objects=$lt_postdep_objects_CXX - -# Dependencies to place before the objects being linked to create a -# shared library. -predeps=$lt_predeps_CXX - -# Dependencies to place after the objects being linked to create a -# shared library. -postdeps=$lt_postdeps_CXX - -# The library search path used internally by the compiler when linking -# a shared library. -compiler_lib_search_path=$lt_compiler_lib_search_path_CXX - -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method - -# Command to use when deplibs_check_method == file_magic. -file_magic_cmd=$lt_file_magic_cmd - -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_allow_undefined_flag_CXX - -# Flag that forces no undefined symbols. -no_undefined_flag=$lt_no_undefined_flag_CXX - -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds - -# Same as above, but a single script fragment to be evaled but not shown. -finish_eval=$lt_finish_eval - -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe - -# Transform the output of nm in a proper C declaration -global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl - -# Transform the output of nm in a C name address pair -global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address - -# This is the shared library runtime path variable. -runpath_var=$runpath_var - -# This is the shared library path variable. -shlibpath_var=$shlibpath_var - -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath - -# How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action_CXX - -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs - -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX - -# If ld is used when linking, flag to hardcode \$libdir into -# a binary during linking. This must work even if \$libdir does -# not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX - -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX - -# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the -# resulting binary. -hardcode_direct=$hardcode_direct_CXX - -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L=$hardcode_minus_L_CXX - -# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into -# the resulting binary. -hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX - -# Set to yes if building a shared library automatically hardcodes DIR into the library -# and all subsequent libraries and executables linked against it. -hardcode_automatic=$hardcode_automatic_CXX - -# Variables whose values should be saved in libtool wrapper scripts and -# restored at relink time. -variables_saved_for_relink="$variables_saved_for_relink" - -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$link_all_deplibs_CXX - -# Compile-time system search path for libraries -sys_lib_search_path_spec=$lt_sys_lib_search_path_spec - -# Run-time system search path for libraries -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec - -# Fix the shell variable \$srcfile for the compiler. -fix_srcfile_path="$fix_srcfile_path_CXX" - -# Set to yes if exported symbols are required. -always_export_symbols=$always_export_symbols_CXX - -# The commands to list exported symbols. -export_symbols_cmds=$lt_export_symbols_cmds_CXX - -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds - -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_exclude_expsyms_CXX - -# Symbols that must always be exported. -include_expsyms=$lt_include_expsyms_CXX +fi + CXXCPP=$ac_cv_prog_CXXCPP +else + ac_cv_prog_CXXCPP=$CXXCPP +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXXCPP" >&5 +$as_echo "$CXXCPP" >&6; } +ac_preproc_ok=false +for ac_cxx_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if ac_fn_cxx_try_cpp "$LINENO"; then : -# ### END LIBTOOL TAG CONFIG: $tagname +else + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.i conftest.$ac_ext -__EOF__ + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if ac_fn_cxx_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue +else + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.i conftest.$ac_ext +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : else - # If there is no Makefile yet, we rely on a make rule to execute - # `config.status --recheck' to rerun these tests and create the - # libtool script then. - ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` - if test -f "$ltmain_in"; then - test -f Makefile && make "$ltmain" - fi + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "C++ preprocessor \"$CXXCPP\" fails sanity check +See \`config.log' for more details" "$LINENO" 5; } fi - ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu -CC=$lt_save_CC -LDCXX=$LD -LD=$lt_save_LD -GCC=$lt_save_GCC -with_gnu_ldcxx=$with_gnu_ld -with_gnu_ld=$lt_save_with_gnu_ld -lt_cv_path_LDCXX=$lt_cv_path_LD -lt_cv_path_LD=$lt_save_path_LD -lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld -lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld - - else - tagname="" - fi - ;; +else + _lt_caught_CXX_error=yes +fi - F77) - if test -n "$F77" && test "X$F77" != "Xno"; then +ac_ext=cpp +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu -ac_ext=f -ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5' -ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_f77_compiler_gnu - - -archive_cmds_need_lc_F77=no -allow_undefined_flag_F77= -always_export_symbols_F77=no -archive_expsym_cmds_F77= -export_dynamic_flag_spec_F77= -hardcode_direct_F77=no -hardcode_libdir_flag_spec_F77= -hardcode_libdir_flag_spec_ld_F77= -hardcode_libdir_separator_F77= -hardcode_minus_L_F77=no -hardcode_automatic_F77=no -module_cmds_F77= -module_expsym_cmds_F77= -link_all_deplibs_F77=unknown -old_archive_cmds_F77=$old_archive_cmds -no_undefined_flag_F77= -whole_archive_flag_spec_F77= -enable_shared_with_static_runtimes_F77=no +archive_cmds_need_lc_CXX=no +allow_undefined_flag_CXX= +always_export_symbols_CXX=no +archive_expsym_cmds_CXX= +compiler_needs_object_CXX=no +export_dynamic_flag_spec_CXX= +hardcode_direct_CXX=no +hardcode_direct_absolute_CXX=no +hardcode_libdir_flag_spec_CXX= +hardcode_libdir_separator_CXX= +hardcode_minus_L_CXX=no +hardcode_shlibpath_var_CXX=unsupported +hardcode_automatic_CXX=no +inherit_rpath_CXX=no +module_cmds_CXX= +module_expsym_cmds_CXX= +link_all_deplibs_CXX=unknown +old_archive_cmds_CXX=$old_archive_cmds +reload_flag_CXX=$reload_flag +reload_cmds_CXX=$reload_cmds +no_undefined_flag_CXX= +whole_archive_flag_spec_CXX= +enable_shared_with_static_runtimes_CXX=no -# Source file extension for f77 test sources. -ac_ext=f +# Source file extension for C++ test sources. +ac_ext=cpp -# Object file extension for compiled f77 test sources. +# Object file extension for compiled C++ test sources. objext=o -objext_F77=$objext +objext_CXX=$objext + +# No sense in running all these tests if we already determined that +# the CXX compiler isn't working. Some variables (like enable_shared) +# are currently assumed to apply to all compilers on this platform, +# and will be corrupted by setting them based on a non-working compiler. +if test "$_lt_caught_CXX_error" != yes; then + # Code to be used in simple compile tests + lt_simple_compile_test_code="int some_variable = 0;" + + # Code to be used in simple link tests + lt_simple_link_test_code='int main(int, char *[]) { return(0); }' + + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + + -# Code to be used in simple compile tests -lt_simple_compile_test_code=" subroutine t\n return\n end\n" -# Code to be used in simple link tests -lt_simple_link_test_code=" program t\n end\n" -# ltmain only uses $CC for tagged configurations so make sure $CC is set. # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + # Allow CC to be a program name with arguments. compiler=$CC -# save warnings/boilerplate of simple test code -ac_outfile=conftest.$ac_objext -printf "$lt_simple_compile_test_code" >conftest.$ac_ext -eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d' >conftest.err + # save warnings/boilerplate of simple test code + ac_outfile=conftest.$ac_objext +echo "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_compiler_boilerplate=`cat conftest.err` -$rm conftest* +$RM conftest* -ac_outfile=conftest.$ac_objext -printf "$lt_simple_link_test_code" >conftest.$ac_ext -eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d' >conftest.err + ac_outfile=conftest.$ac_objext +echo "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_linker_boilerplate=`cat conftest.err` -$rm conftest* +$RM -r conftest* -# Allow CC to be a program name with arguments. -lt_save_CC="$CC" -CC=${F77-"f77"} -compiler=$CC -compiler_F77=$CC -for cc_temp in $compiler""; do + # Allow CC to be a program name with arguments. + lt_save_CC=$CC + lt_save_CFLAGS=$CFLAGS + lt_save_LD=$LD + lt_save_GCC=$GCC + GCC=$GXX + lt_save_with_gnu_ld=$with_gnu_ld + lt_save_path_LD=$lt_cv_path_LD + if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then + lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx + else + $as_unset lt_cv_prog_gnu_ld + fi + if test -n "${lt_cv_path_LDCXX+set}"; then + lt_cv_path_LD=$lt_cv_path_LDCXX + else + $as_unset lt_cv_path_LD + fi + test -z "${LDCXX+set}" || LD=$LDCXX + CC=${CXX-"c++"} + CFLAGS=$CXXFLAGS + compiler=$CC + compiler_CXX=$CC + for cc_temp in $compiler""; do case $cc_temp in compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; @@ -13587,8380 +12136,5881 @@ for cc_temp in $compiler""; do *) break;; esac done -cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` - - -echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 -echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6 -echo "$as_me:$LINENO: result: $can_build_shared" >&5 -echo "${ECHO_T}$can_build_shared" >&6 - -echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 -echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6 -test "$can_build_shared" = "no" && enable_shared=no - -# On AIX, shared libraries and static libraries use the same namespace, and -# are all built from PIC. -case $host_os in -aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; -aix4* | aix5*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no - fi - ;; -esac -echo "$as_me:$LINENO: result: $enable_shared" >&5 -echo "${ECHO_T}$enable_shared" >&6 +cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` -echo "$as_me:$LINENO: checking whether to build static libraries" >&5 -echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6 -# Make sure either enable_shared or enable_static is yes. -test "$enable_shared" = yes || enable_static=yes -echo "$as_me:$LINENO: result: $enable_static" >&5 -echo "${ECHO_T}$enable_static" >&6 - -test "$ld_shlibs_F77" = no && can_build_shared=no - -GCC_F77="$G77" -LD_F77="$LD" - -lt_prog_compiler_wl_F77= -lt_prog_compiler_pic_F77= -lt_prog_compiler_static_F77= -echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 -echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 - - if test "$GCC" = yes; then - lt_prog_compiler_wl_F77='-Wl,' - lt_prog_compiler_static_F77='-static' + if test -n "$compiler"; then + # We don't want -fno-exception when compiling C++ code, so set the + # no_builtin_flag separately + if test "$GXX" = yes; then + lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin' + else + lt_prog_compiler_no_builtin_flag_CXX= + fi - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static_F77='-Bstatic' - fi - ;; + if test "$GXX" = yes; then + # Set up default GNU C++ configuration - amigaos*) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - lt_prog_compiler_pic_F77='-m68020 -resident32 -malways-restore-a4' - ;; - beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - mingw* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_prog_compiler_pic_F77='-DDLL_EXPORT' - ;; +# Check whether --with-gnu-ld was given. +if test "${with_gnu_ld+set}" = set; then : + withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes +else + with_gnu_ld=no +fi - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - lt_prog_compiler_pic_F77='-fno-common' - ;; - - msdosdjgpp*) - # Just because we use GCC doesn't mean we suddenly get shared libraries - # on systems that don't support them. - lt_prog_compiler_can_build_shared_F77=no - enable_shared=no - ;; - - sysv4*MP*) - if test -d /usr/nec; then - lt_prog_compiler_pic_F77=-Kconform_pic - fi +ac_prog=ld +if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 +$as_echo_n "checking for ld used by $CC... " >&6; } + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [\\/]* | ?:[\\/]*) + re_direlt='/[^/][^/]*/\.\./' + # Canonicalize the pathname of ld + ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` + while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do + ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" ;; - - hpux*) - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test "$with_gnu_ld" = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 +$as_echo_n "checking for GNU ld... " >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 +$as_echo_n "checking for non-GNU ld... " >&6; } +fi +if ${lt_cv_path_LD+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$LD"; then + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some variants of GNU ld only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$lt_cv_path_LD" -v 2>&1 &5 +$as_echo "$LD" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi +test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 +$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } +if ${lt_cv_prog_gnu_ld+:} false; then : + $as_echo_n "(cached) " >&6 +else + # I'd rather use --version here, but apparently some GNU lds only accept -v. +case `$LD -v 2>&1 &5 +$as_echo "$lt_cv_prog_gnu_ld" >&6; } +with_gnu_ld=$lt_cv_prog_gnu_ld - mingw* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_prog_compiler_pic_F77='-DDLL_EXPORT' - ;; - hpux9* | hpux10* | hpux11*) - lt_prog_compiler_wl_F77='-Wl,' - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic_F77='+Z' - ;; - esac - # Is there a better lt_prog_compiler_static that works with the bundled CC? - lt_prog_compiler_static_F77='${wl}-a ${wl}archive' - ;; - irix5* | irix6* | nonstopux*) - lt_prog_compiler_wl_F77='-Wl,' - # PIC (with -KPIC) is the default. - lt_prog_compiler_static_F77='-non_shared' - ;; - newsos6) - lt_prog_compiler_pic_F77='-KPIC' - lt_prog_compiler_static_F77='-Bstatic' - ;; - linux*) - case $cc_basename in - icc* | ecc*) - lt_prog_compiler_wl_F77='-Wl,' - lt_prog_compiler_pic_F77='-KPIC' - lt_prog_compiler_static_F77='-static' - ;; - pgcc* | pgf77* | pgf90* | pgf95*) - # Portland Group compilers (*not* the Pentium gcc compiler, - # which looks to be a dead project) - lt_prog_compiler_wl_F77='-Wl,' - lt_prog_compiler_pic_F77='-fpic' - lt_prog_compiler_static_F77='-Bstatic' - ;; - ccc*) - lt_prog_compiler_wl_F77='-Wl,' - # All Alpha code is PIC. - lt_prog_compiler_static_F77='-non_shared' - ;; - esac - ;; - osf3* | osf4* | osf5*) - lt_prog_compiler_wl_F77='-Wl,' - # All OSF/1 code is PIC. - lt_prog_compiler_static_F77='-non_shared' - ;; - sco3.2v5*) - lt_prog_compiler_pic_F77='-Kpic' - lt_prog_compiler_static_F77='-dn' - ;; + # Check if GNU C++ uses GNU ld as the underlying linker, since the + # archiving commands below assume that GNU ld is being used. + if test "$with_gnu_ld" = yes; then + archive_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + + hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' + export_dynamic_flag_spec_CXX='${wl}--export-dynamic' + + # If archive_cmds runs LD, not CC, wlarc should be empty + # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to + # investigate it a little bit more. (MM) + wlarc='${wl}' + + # ancient GNU ld didn't support --whole-archive et. al. + if eval "`$CC -print-prog-name=ld` --help 2>&1" | + $GREP 'no-whole-archive' > /dev/null; then + whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + whole_archive_flag_spec_CXX= + fi + else + with_gnu_ld=no + wlarc= - solaris*) - lt_prog_compiler_pic_F77='-KPIC' - lt_prog_compiler_static_F77='-Bstatic' - case $cc_basename in - f77* | f90* | f95*) - lt_prog_compiler_wl_F77='-Qoption ld ';; - *) - lt_prog_compiler_wl_F77='-Wl,';; - esac - ;; + # A generic and very simple default shared library creation + # command for GNU C++ for the case where it uses the native + # linker, instead of GNU ld. If possible, this setting should + # overridden to take advantage of the native linker features on + # the platform it is being used on. + archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' + fi - sunos4*) - lt_prog_compiler_wl_F77='-Qoption ld ' - lt_prog_compiler_pic_F77='-PIC' - lt_prog_compiler_static_F77='-Bstatic' - ;; + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' - sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - lt_prog_compiler_wl_F77='-Wl,' - lt_prog_compiler_pic_F77='-KPIC' - lt_prog_compiler_static_F77='-Bstatic' - ;; + else + GXX=no + with_gnu_ld=no + wlarc= + fi - sysv4*MP*) - if test -d /usr/nec ;then - lt_prog_compiler_pic_F77='-Kconform_pic' - lt_prog_compiler_static_F77='-Bstatic' - fi - ;; + # PORTME: fill in a description of your system's C++ link characteristics + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } + ld_shlibs_CXX=yes + case $host_os in + aix3*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + aix[4-9]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + aix_use_runtimelinking=no - unicos*) - lt_prog_compiler_wl_F77='-Wl,' - lt_prog_compiler_can_build_shared_F77=no - ;; + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) + for ld_flag in $LDFLAGS; do + case $ld_flag in + *-brtl*) + aix_use_runtimelinking=yes + break + ;; + esac + done + ;; + esac - uts4*) - lt_prog_compiler_pic_F77='-pic' - lt_prog_compiler_static_F77='-Bstatic' - ;; + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi - *) - lt_prog_compiler_can_build_shared_F77=no - ;; - esac - fi + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + archive_cmds_CXX='' + hardcode_direct_CXX=yes + hardcode_direct_absolute_CXX=yes + hardcode_libdir_separator_CXX=':' + link_all_deplibs_CXX=yes + file_list_spec_CXX='${wl}-f,' + + if test "$GXX" = yes; then + case $host_os in aix4.[012]|aix4.[012].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && + strings "$collect2name" | $GREP resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + hardcode_direct_CXX=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + hardcode_minus_L_CXX=yes + hardcode_libdir_flag_spec_CXX='-L$libdir' + hardcode_libdir_separator_CXX= + fi + esac + shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi -echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_F77" >&5 -echo "${ECHO_T}$lt_prog_compiler_pic_F77" >&6 + export_dynamic_flag_spec_CXX='${wl}-bexpall' + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to + # export. + always_export_symbols_CXX=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + allow_undefined_flag_CXX='-berok' + # Determine the default libpath from the value encoded in an empty + # executable. + if test "${lt_cv_aix_libpath+set}" = set; then + aix_libpath=$lt_cv_aix_libpath +else + if ${lt_cv_aix_libpath__CXX+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ -# -# Check to make sure the PIC flag actually works. -# -if test -n "$lt_prog_compiler_pic_F77"; then +int +main () +{ -echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works" >&5 -echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works... $ECHO_C" >&6 -if test "${lt_prog_compiler_pic_works_F77+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_prog_compiler_pic_works_F77=no - ac_outfile=conftest.$ac_objext - printf "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="$lt_prog_compiler_pic_F77" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:13867: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 - echo "$as_me:13871: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $echo "X$_lt_compiler_boilerplate" | $Xsed >conftest.exp - $SED '/^$/d' conftest.err >conftest.er2 - if test ! -s conftest.err || diff conftest.exp conftest.er2 >/dev/null; then - lt_prog_compiler_pic_works_F77=yes - fi - fi - $rm conftest* + ; + return 0; +} +_ACEOF +if ac_fn_cxx_try_link "$LINENO"; then : + lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\([^ ]*\) *$/\1/ + p + } + }' + lt_cv_aix_libpath__CXX=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. + if test -z "$lt_cv_aix_libpath__CXX"; then + lt_cv_aix_libpath__CXX=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi fi -echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_F77" >&5 -echo "${ECHO_T}$lt_prog_compiler_pic_works_F77" >&6 +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$lt_cv_aix_libpath__CXX"; then + lt_cv_aix_libpath__CXX="/usr/lib:/lib" + fi -if test x"$lt_prog_compiler_pic_works_F77" = xyes; then - case $lt_prog_compiler_pic_F77 in - "" | " "*) ;; - *) lt_prog_compiler_pic_F77=" $lt_prog_compiler_pic_F77" ;; - esac -else - lt_prog_compiler_pic_F77= - lt_prog_compiler_can_build_shared_F77=no fi + aix_libpath=$lt_cv_aix_libpath__CXX fi -case $host_os in - # For platforms which do not support PIC, -DPIC is meaningless: - *djgpp*) - lt_prog_compiler_pic_F77= - ;; - *) - lt_prog_compiler_pic_F77="$lt_prog_compiler_pic_F77" - ;; -esac -echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 -echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 -if test "${lt_cv_prog_compiler_c_o_F77+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" + + archive_expsym_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib' + allow_undefined_flag_CXX="-z nodefs" + archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an + # empty executable. + if test "${lt_cv_aix_libpath+set}" = set; then + aix_libpath=$lt_cv_aix_libpath else - lt_cv_prog_compiler_c_o_F77=no - $rm -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - printf "$lt_simple_compile_test_code" > conftest.$ac_ext + if ${lt_cv_aix_libpath__CXX+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:13929: $lt_compile\"" >&5) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&5 - echo "$as_me:13933: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $echo "X$_lt_compiler_boilerplate" | $Xsed > out/conftest.exp - $SED '/^$/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.err || diff out/conftest.exp out/conftest.er2 >/dev/null; then - lt_cv_prog_compiler_c_o_F77=yes - fi - fi - chmod u+w . 2>&5 - $rm conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files - $rm out/* && rmdir out - cd .. - rmdir conftest - $rm conftest* - -fi -echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_F77" >&5 -echo "${ECHO_T}$lt_cv_prog_compiler_c_o_F77" >&6 +int +main () +{ + ; + return 0; +} +_ACEOF +if ac_fn_cxx_try_link "$LINENO"; then : -hard_links="nottested" -if test "$lt_cv_prog_compiler_c_o_F77" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 -echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6 - hard_links=yes - $rm conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - echo "$as_me:$LINENO: result: $hard_links" >&5 -echo "${ECHO_T}$hard_links" >&6 - if test "$hard_links" = no; then - { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 -echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} - need_locks=warn + lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\([^ ]*\) *$/\1/ + p + } + }' + lt_cv_aix_libpath__CXX=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. + if test -z "$lt_cv_aix_libpath__CXX"; then + lt_cv_aix_libpath__CXX=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$lt_cv_aix_libpath__CXX"; then + lt_cv_aix_libpath__CXX="/usr/lib:/lib" fi -else - need_locks=no -fi -echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 -echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 +fi - runpath_var= - allow_undefined_flag_F77= - enable_shared_with_static_runtimes_F77=no - archive_cmds_F77= - archive_expsym_cmds_F77= - old_archive_From_new_cmds_F77= - old_archive_from_expsyms_cmds_F77= - export_dynamic_flag_spec_F77= - whole_archive_flag_spec_F77= - thread_safe_flag_spec_F77= - hardcode_libdir_flag_spec_F77= - hardcode_libdir_flag_spec_ld_F77= - hardcode_libdir_separator_F77= - hardcode_direct_F77=no - hardcode_minus_L_F77=no - hardcode_shlibpath_var_F77=unsupported - link_all_deplibs_F77=unknown - hardcode_automatic_F77=no - module_cmds_F77= - module_expsym_cmds_F77= - always_export_symbols_F77=no - export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - # include_expsyms should be a list of space-separated symbols to be *always* - # included in the symbol list - include_expsyms_F77= - # exclude_expsyms can be an extended regexp of symbols to exclude - # it will be wrapped by ` (' and `)$', so one must not match beginning or - # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', - # as well as any symbol that contains `d'. - exclude_expsyms_F77="_GLOBAL_OFFSET_TABLE_" - # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out - # platforms (ab)use it in PIC code, but their linkers get confused if - # the symbol is explicitly referenced. Since portable code cannot - # rely on this symbol name, it's probably fine to never include it in - # preloaded symbol tables. - extract_expsyms_cmds= - # Just being paranoid about ensuring that cc_basename is set. - for cc_temp in $compiler""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` + aix_libpath=$lt_cv_aix_libpath__CXX +fi + + hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + no_undefined_flag_CXX=' ${wl}-bernotok' + allow_undefined_flag_CXX=' ${wl}-berok' + if test "$with_gnu_ld" = yes; then + # We only use this code for GNU lds that support --whole-archive. + whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + else + # Exported symbols can be pulled into shared objects from archives + whole_archive_flag_spec_CXX='$convenience' + fi + archive_cmds_need_lc_CXX=yes + # This is similar to how AIX traditionally builds its shared + # libraries. + archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; - case $host_os in - cygwin* | mingw* | pw32*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no - fi - ;; - openbsd*) - with_gnu_ld=no - ;; - esac + beos*) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + allow_undefined_flag_CXX=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + ld_shlibs_CXX=no + fi + ;; - ld_shlibs_F77=yes - if test "$with_gnu_ld" = yes; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' + chorus*) + case $cc_basename in + *) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + esac + ;; - # Set some defaults for GNU ld with shared library support. These - # are reset later if shared libraries are not supported. Putting them - # here allows them to be overridden if necessary. - runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec_F77='${wl}--rpath ${wl}$libdir' - export_dynamic_flag_spec_F77='${wl}--export-dynamic' - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec_F77="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - whole_archive_flag_spec_F77= - fi - supports_anon_versioning=no - case `$LD -v 2>/dev/null` in - *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 - *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... - *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... - *\ 2.11.*) ;; # other 2.11 versions - *) supports_anon_versioning=yes ;; - esac + cygwin* | mingw* | pw32* | cegcc*) + case $GXX,$cc_basename in + ,cl* | no,cl*) + # Native MSVC + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec_CXX=' ' + allow_undefined_flag_CXX=unsupported + always_export_symbols_CXX=yes + file_list_spec_CXX='@' + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + archive_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' + archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; + else + $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; + fi~ + $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ + linknames=' + # The linker will not automatically build a static lib if we build a DLL. + # _LT_TAGVAR(old_archive_from_new_cmds, CXX)='true' + enable_shared_with_static_runtimes_CXX=yes + # Don't use ranlib + old_postinstall_cmds_CXX='chmod 644 $oldlib' + postlink_cmds_CXX='lt_outputfile="@OUTPUT@"~ + lt_tool_outputfile="@TOOL_OUTPUT@"~ + case $lt_outputfile in + *.exe|*.EXE) ;; + *) + lt_outputfile="$lt_outputfile.exe" + lt_tool_outputfile="$lt_tool_outputfile.exe" + ;; + esac~ + func_to_tool_file "$lt_outputfile"~ + if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then + $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; + $RM "$lt_outputfile.manifest"; + fi' + ;; + *) + # g++ + # _LT_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless, + # as there is no search path for DLLs. + hardcode_libdir_flag_spec_CXX='-L$libdir' + export_dynamic_flag_spec_CXX='${wl}--export-all-symbols' + allow_undefined_flag_CXX=unsupported + always_export_symbols_CXX=no + enable_shared_with_static_runtimes_CXX=yes + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + ld_shlibs_CXX=no + fi + ;; + esac + ;; + darwin* | rhapsody*) - # See if GNU ld supports shared libraries. - case $host_os in - aix3* | aix4* | aix5*) - # On AIX/PPC, the GNU linker is very broken - if test "$host_cpu" != ia64; then - ld_shlibs_F77=no - cat <&2 -*** Warning: the GNU linker, at least up to release 2.9.1, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to modify your PATH -*** so that a non-GNU linker is found, and then restart. + archive_cmds_need_lc_CXX=no + hardcode_direct_CXX=no + hardcode_automatic_CXX=yes + hardcode_shlibpath_var_CXX=unsupported + if test "$lt_cv_ld_force_load" = "yes"; then + whole_archive_flag_spec_CXX='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' -EOF - fi - ;; + else + whole_archive_flag_spec_CXX='' + fi + link_all_deplibs_CXX=yes + allow_undefined_flag_CXX="$_lt_dar_allow_undefined" + case $cc_basename in + ifort*) _lt_dar_can_shared=yes ;; + *) _lt_dar_can_shared=$GCC ;; + esac + if test "$_lt_dar_can_shared" = "yes"; then + output_verbose_link_cmd=func_echo_all + archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" + module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" + archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" + module_expsym_cmds_CXX="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" + if test "$lt_cv_apple_cc_single_mod" != "yes"; then + archive_cmds_CXX="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" + archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" + fi - amigaos*) - archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec_F77='-L$libdir' - hardcode_minus_L_F77=yes - - # Samuel A. Falvo II reports - # that the semantics of dynamic libraries on AmigaOS, at least up - # to version 4, is to share data among multiple programs linked - # with the same dynamic library. Since this doesn't match the - # behavior of shared libraries on other platforms, we can't use - # them. - ld_shlibs_F77=no - ;; + else + ld_shlibs_CXX=no + fi - beos*) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - allow_undefined_flag_F77=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - archive_cmds_F77='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - ld_shlibs_F77=no - fi - ;; + ;; - cygwin* | mingw* | pw32*) - # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, F77) is actually meaningless, - # as there is no search path for DLLs. - hardcode_libdir_flag_spec_F77='-L$libdir' - allow_undefined_flag_F77=unsupported - always_export_symbols_F77=no - enable_shared_with_static_runtimes_F77=yes - export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' + dgux*) + case $cc_basename in + ec++*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + ghcx*) + # Green Hills C++ Compiler + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + *) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + esac + ;; - if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then - archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - archive_expsym_cmds_F77='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' - else - ld_shlibs_F77=no - fi - ;; + freebsd2.*) + # C++ shared libraries reported to be fairly broken before + # switch to ELF + ld_shlibs_CXX=no + ;; - linux*) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - tmp_addflag= - case $cc_basename,$host_cpu in - pgcc*) # Portland Group C compiler - whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag' - ;; - pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers - whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag -Mnomain' ;; - ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 - tmp_addflag=' -i_dynamic' ;; - efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 - tmp_addflag=' -i_dynamic -nofor_main' ;; - ifc* | ifort*) # Intel Fortran compiler - tmp_addflag=' -nofor_main' ;; - esac - archive_cmds_F77='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + freebsd-elf*) + archive_cmds_need_lc_CXX=no + ;; - if test $supports_anon_versioning = yes; then - archive_expsym_cmds_F77='$echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - $echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' - fi - else - ld_shlibs_F77=no - fi - ;; + freebsd* | dragonfly*) + # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF + # conventions + ld_shlibs_CXX=yes + ;; - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds_F77='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else - archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; + gnu*) + ;; - solaris* | sysv5*) - if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then - ld_shlibs_F77=no - cat <&2 + haiku*) + archive_cmds_CXX='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + link_all_deplibs_CXX=yes + ;; -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. + hpux9*) + hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' + hardcode_libdir_separator_CXX=: + export_dynamic_flag_spec_CXX='${wl}-E' + hardcode_direct_CXX=yes + hardcode_minus_L_CXX=yes # Not in the search PATH, + # but as the default + # location of the library. + + case $cc_basename in + CC*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + aCC*) + archive_cmds_CXX='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + ;; + *) + if test "$GXX" = yes; then + archive_cmds_CXX='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + fi + ;; + esac + ;; -EOF - elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs_F77=no - fi - ;; + hpux10*|hpux11*) + if test $with_gnu_ld = no; then + hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' + hardcode_libdir_separator_CXX=: - sunos4*) - archive_cmds_F77='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' - wlarc= - hardcode_direct_F77=yes - hardcode_shlibpath_var_F77=no - ;; + case $host_cpu in + hppa*64*|ia64*) + ;; + *) + export_dynamic_flag_spec_CXX='${wl}-E' + ;; + esac + fi + case $host_cpu in + hppa*64*|ia64*) + hardcode_direct_CXX=no + hardcode_shlibpath_var_CXX=no + ;; + *) + hardcode_direct_CXX=yes + hardcode_direct_absolute_CXX=yes + hardcode_minus_L_CXX=yes # Not in the search PATH, + # but as the default + # location of the library. + ;; + esac - *) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs_F77=no - fi - ;; - esac + case $cc_basename in + CC*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + aCC*) + case $host_cpu in + hppa*64*) + archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + ia64*) + archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + *) + archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + esac + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + ;; + *) + if test "$GXX" = yes; then + if test $with_gnu_ld = no; then + case $host_cpu in + hppa*64*) + archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + ia64*) + archive_cmds_CXX='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + *) + archive_cmds_CXX='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + esac + fi + else + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + fi + ;; + esac + ;; - if test "$ld_shlibs_F77" = no; then - runpath_var= - hardcode_libdir_flag_spec_F77= - export_dynamic_flag_spec_F77= - whole_archive_flag_spec_F77= - fi - else - # PORTME fill in a description of your system's linker (not GNU ld) - case $host_os in - aix3*) - allow_undefined_flag_F77=unsupported - always_export_symbols_F77=yes - archive_expsym_cmds_F77='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - hardcode_minus_L_F77=yes - if test "$GCC" = yes && test -z "$link_static_flag"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - hardcode_direct_F77=unsupported - fi - ;; + interix[3-9]*) + hardcode_direct_CXX=no + hardcode_shlibpath_var_CXX=no + hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' + export_dynamic_flag_spec_CXX='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + irix5* | irix6*) + case $cc_basename in + CC*) + # SGI C++ + archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + + # Archives containing C++ object files must be created using + # "CC -ar", where "CC" is the IRIX C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs' + ;; + *) + if test "$GXX" = yes; then + if test "$with_gnu_ld" = no; then + archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib' + fi + fi + link_all_deplibs_CXX=yes + ;; + esac + hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator_CXX=: + inherit_rpath_CXX=yes + ;; - aix4* | aix5*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - if $NM -V 2>&1 | grep 'GNU' > /dev/null; then - export_symbols_cmds_F77='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' - else - export_symbols_cmds_F77='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' - fi - aix_use_runtimelinking=no + linux* | k*bsd*-gnu | kopensolaris*-gnu) + case $cc_basename in + KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + + hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' + export_dynamic_flag_spec_CXX='${wl}--export-dynamic' + + # Archives containing C++ object files must be created using + # "CC -Bstatic", where "CC" is the KAI C++ compiler. + old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' + ;; + icpc* | ecpc* ) + # Intel C++ + with_gnu_ld=yes + # version 8.0 and above of icpc choke on multiply defined symbols + # if we add $predep_objects and $postdep_objects, however 7.1 and + # earlier do not add the objects themselves. + case `$CC -V 2>&1` in + *"Version 7."*) + archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + ;; + *) # Version 8.0 or newer + tmp_idyn= + case $host_cpu in + ia64*) tmp_idyn=' -i_dynamic';; + esac + archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + ;; + esac + archive_cmds_need_lc_CXX=no + hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' + export_dynamic_flag_spec_CXX='${wl}--export-dynamic' + whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + ;; + pgCC* | pgcpp*) + # Portland Group C++ compiler + case `$CC -V` in + *pgCC\ [1-5].* | *pgcpp\ [1-5].*) + prelink_cmds_CXX='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ + compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"' + old_archive_cmds_CXX='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ + $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~ + $RANLIB $oldlib' + archive_cmds_CXX='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ + $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' + archive_expsym_cmds_CXX='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ + $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' + ;; + *) # Version 6 and above use weak symbols + archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' + archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' + ;; + esac - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[23]|aix4.[23].*|aix5*) - for ld_flag in $LDFLAGS; do - if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then - aix_use_runtimelinking=yes - break - fi - done - esac + hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir' + export_dynamic_flag_spec_CXX='${wl}--export-dynamic' + whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + ;; + cxx*) + # Compaq C++ + archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi + runpath_var=LD_RUN_PATH + hardcode_libdir_flag_spec_CXX='-rpath $libdir' + hardcode_libdir_separator_CXX=: - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed' + ;; + xl* | mpixl* | bgxl*) + # IBM XL 8.0 on PPC, with GNU ld + hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' + export_dynamic_flag_spec_CXX='${wl}--export-dynamic' + archive_cmds_CXX='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + if test "x$supports_anon_versioning" = xyes; then + archive_expsym_cmds_CXX='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C++ 5.9 + no_undefined_flag_CXX=' -zdefs' + archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + archive_expsym_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' + hardcode_libdir_flag_spec_CXX='-R$libdir' + whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + compiler_needs_object_CXX=yes + + # Not sure whether something based on + # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 + # would be better. + output_verbose_link_cmd='func_echo_all' + + # Archives containing C++ object files must be created using + # "CC -xar", where "CC" is the Sun C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs' + ;; + esac + ;; + esac + ;; + + lynxos*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; - archive_cmds_F77='' - hardcode_direct_F77=yes - hardcode_libdir_separator_F77=':' - link_all_deplibs_F77=yes + m88k*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; - if test "$GCC" = yes; then - case $host_os in aix4.[012]|aix4.[012].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - hardcode_direct_F77=yes - else - # We have old collect2 - hardcode_direct_F77=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - hardcode_minus_L_F77=yes - hardcode_libdir_flag_spec_F77='-L$libdir' - hardcode_libdir_separator_F77= - fi + mvs*) + case $cc_basename in + cxx*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + *) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; esac - shared_flag='-shared' - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + archive_cmds_CXX='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' + wlarc= + hardcode_libdir_flag_spec_CXX='-R$libdir' + hardcode_direct_CXX=yes + hardcode_shlibpath_var_CXX=no fi - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' + # Workaround some broken pre-1.5 toolchains + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' + ;; + + *nto* | *qnx*) + ld_shlibs_CXX=yes + ;; + + openbsd2*) + # C++ shared libraries are fairly broken + ld_shlibs_CXX=no + ;; + + openbsd*) + if test -f /usr/libexec/ld.so; then + hardcode_direct_CXX=yes + hardcode_shlibpath_var_CXX=no + hardcode_direct_absolute_CXX=yes + archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' + hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' + export_dynamic_flag_spec_CXX='${wl}-E' + whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + fi + output_verbose_link_cmd=func_echo_all else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' - else - shared_flag='${wl}-bM:SRE' - fi + ld_shlibs_CXX=no fi - fi + ;; - # It seems that -bexpall does not export symbols beginning with - # underscore (_), so it is better to generate a list of symbols to export. - always_export_symbols_F77=yes - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - allow_undefined_flag_F77='-berok' - # Determine the default libpath from the value encoded in an empty executable. - cat >conftest.$ac_ext <<_ACEOF - program main - - end -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_f77_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then + osf3* | osf4* | osf5*) + case $cc_basename in + KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + + hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' + hardcode_libdir_separator_CXX=: + + # Archives containing C++ object files must be created using + # the KAI C++ compiler. + case $host in + osf3*) old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' ;; + *) old_archive_cmds_CXX='$CC -o $oldlib $oldobjs' ;; + esac + ;; + RCC*) + # Rational C++ 2.4.1 + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + cxx*) + case $host in + osf3*) + allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' + ;; + *) + allow_undefined_flag_CXX=' -expect_unresolved \*' + archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ + echo "-hidden">> $lib.exp~ + $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~ + $RM $lib.exp' + hardcode_libdir_flag_spec_CXX='-rpath $libdir' + ;; + esac -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'`; fi -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + hardcode_libdir_separator_CXX=: -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + ;; + *) + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' + case $host in + osf3*) + archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + ;; + *) + archive_cmds_CXX='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + ;; + esac + + hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator_CXX=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + + else + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + fi + ;; + esac + ;; - hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath" - archive_expsym_cmds_F77="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec_F77='${wl}-R $libdir:/usr/lib:/lib' - allow_undefined_flag_F77="-z nodefs" - archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an empty executable. - cat >conftest.$ac_ext <<_ACEOF - program main - - end -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_f77_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then + psos*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'`; fi -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + sunos4*) + case $cc_basename in + CC*) + # Sun C++ 4.x + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + lcc*) + # Lucid + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + *) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + esac + ;; -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + solaris*) + case $cc_basename in + CC* | sunCC*) + # Sun C++ 4.2, 5.x and Centerline C++ + archive_cmds_need_lc_CXX=yes + no_undefined_flag_CXX=' -zdefs' + archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + + hardcode_libdir_flag_spec_CXX='-R$libdir' + hardcode_shlibpath_var_CXX=no + case $host_os in + solaris2.[0-5] | solaris2.[0-5].*) ;; + *) + # The compiler driver will combine and reorder linker options, + # but understands `-z linker_flag'. + # Supported since Solaris 2.6 (maybe 2.5.1?) + whole_archive_flag_spec_CXX='-z allextract$convenience -z defaultextract' + ;; + esac + link_all_deplibs_CXX=yes - hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - no_undefined_flag_F77=' ${wl}-bernotok' - allow_undefined_flag_F77=' ${wl}-berok' - # -bexpall does not export symbols beginning with underscore (_) - always_export_symbols_F77=yes - # Exported symbols can be pulled into shared objects from archives - whole_archive_flag_spec_F77=' ' - archive_cmds_need_lc_F77=yes - # This is similar to how AIX traditionally builds its shared libraries. - archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi - fi - ;; + output_verbose_link_cmd='func_echo_all' - amigaos*) - archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec_F77='-L$libdir' - hardcode_minus_L_F77=yes - # see comment about different semantics on the GNU ld section - ld_shlibs_F77=no - ;; + # Archives containing C++ object files must be created using + # "CC -xar", where "CC" is the Sun C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs' + ;; + gcx*) + # Green Hills C++ Compiler + archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - bsdi[45]*) - export_dynamic_flag_spec_F77=-rdynamic - ;; + # The C++ compiler must be used to create the archive. + old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs' + ;; + *) + # GNU C++ compiler with Solaris linker + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + no_undefined_flag_CXX=' ${wl}-z ${wl}defs' + if $CC --version | $GREP -v '^2\.7' > /dev/null; then + archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + else + # g++ 2.7 appears to require `-G' NOT `-shared' on this + # platform. + archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + fi + + hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir' + case $host_os in + solaris2.[0-5] | solaris2.[0-5].*) ;; + *) + whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + ;; + esac + fi + ;; + esac + ;; - cygwin* | mingw* | pw32*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec_F77=' ' - allow_undefined_flag_F77=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - archive_cmds_F77='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - old_archive_From_new_cmds_F77='true' - # FIXME: Should let the user specify the lib program. - old_archive_cmds_F77='lib /OUT:$oldlib$oldobjs$old_deplibs' - fix_srcfile_path_F77='`cygpath -w "$srcfile"`' - enable_shared_with_static_runtimes_F77=yes - ;; + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) + no_undefined_flag_CXX='${wl}-z,text' + archive_cmds_need_lc_CXX=no + hardcode_shlibpath_var_CXX=no + runpath_var='LD_RUN_PATH' - darwin* | rhapsody*) - case $host_os in - rhapsody* | darwin1.[012]) - allow_undefined_flag_F77='${wl}-undefined ${wl}suppress' - ;; - *) # Darwin 1.3 on - if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then - allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' - else - case ${MACOSX_DEPLOYMENT_TARGET} in - 10.[012]) - allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' - ;; - 10.*) - allow_undefined_flag_F77='${wl}-undefined ${wl}dynamic_lookup' - ;; - esac - fi - ;; - esac - archive_cmds_need_lc_F77=no - hardcode_direct_F77=no - hardcode_automatic_F77=yes - hardcode_shlibpath_var_F77=unsupported - whole_archive_flag_spec_F77='' - link_all_deplibs_F77=yes - if test "$GCC" = yes ; then - output_verbose_link_cmd='echo' - archive_cmds_F77='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' - module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds - archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - else case $cc_basename in - xlc*) - output_verbose_link_cmd='echo' - archive_cmds_F77='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' - module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds - archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - ;; - *) - ld_shlibs_F77=no - ;; + CC*) + archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; esac - fi ;; - dgux*) - archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec_F77='-L$libdir' - hardcode_shlibpath_var_F77=no - ;; + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + no_undefined_flag_CXX='${wl}-z,text' + allow_undefined_flag_CXX='${wl}-z,nodefs' + archive_cmds_need_lc_CXX=no + hardcode_shlibpath_var_CXX=no + hardcode_libdir_flag_spec_CXX='${wl}-R,$libdir' + hardcode_libdir_separator_CXX=':' + link_all_deplibs_CXX=yes + export_dynamic_flag_spec_CXX='${wl}-Bexport' + runpath_var='LD_RUN_PATH' - freebsd1*) - ld_shlibs_F77=no + case $cc_basename in + CC*) + archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + old_archive_cmds_CXX='$CC -Tprelink_objects $oldobjs~ + '"$old_archive_cmds_CXX" + reload_cmds_CXX='$CC -Tprelink_objects $reload_objs~ + '"$reload_cmds_CXX" + ;; + *) + archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac ;; - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - hardcode_libdir_flag_spec_F77='-R$libdir' - hardcode_direct_F77=yes - hardcode_shlibpath_var_F77=no - ;; + tandem*) + case $cc_basename in + NCC*) + # NonStop-UX NCC 3.20 + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + *) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + esac + ;; - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2*) - archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct_F77=yes - hardcode_minus_L_F77=yes - hardcode_shlibpath_var_F77=no - ;; + vxworks*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd* | kfreebsd*-gnu | dragonfly*) - archive_cmds_F77='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec_F77='-R$libdir' - hardcode_direct_F77=yes - hardcode_shlibpath_var_F77=no - ;; + *) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + esac - hpux9*) - if test "$GCC" = yes; then - archive_cmds_F77='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - else - archive_cmds_F77='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - fi - hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' - hardcode_libdir_separator_F77=: - hardcode_direct_F77=yes + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5 +$as_echo "$ld_shlibs_CXX" >&6; } + test "$ld_shlibs_CXX" = no && can_build_shared=no + + GCC_CXX="$GXX" + LD_CXX="$LD" + + ## CAVEAT EMPTOR: + ## There is no encapsulation within the following macros, do not change + ## the running order or otherwise move them around unless you know exactly + ## what you are doing... + # Dependencies to place before and after the object being linked: +predep_objects_CXX= +postdep_objects_CXX= +predeps_CXX= +postdeps_CXX= +compiler_lib_search_path_CXX= - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L_F77=yes - export_dynamic_flag_spec_F77='${wl}-E' - ;; +cat > conftest.$ac_ext <<_LT_EOF +class Foo +{ +public: + Foo (void) { a = 0; } +private: + int a; +}; +_LT_EOF - hpux10* | hpux11*) - if test "$GCC" = yes -a "$with_gnu_ld" = no; then - case $host_cpu in - hppa*64*|ia64*) - archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - else - case $host_cpu in - hppa*64*|ia64*) - archive_cmds_F77='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags' - ;; - *) - archive_cmds_F77='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' - ;; - esac - fi - if test "$with_gnu_ld" = no; then - case $host_cpu in - hppa*64*) - hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' - hardcode_libdir_flag_spec_ld_F77='+b $libdir' - hardcode_libdir_separator_F77=: - hardcode_direct_F77=no - hardcode_shlibpath_var_F77=no - ;; - ia64*) - hardcode_libdir_flag_spec_F77='-L$libdir' - hardcode_direct_F77=no - hardcode_shlibpath_var_F77=no - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L_F77=yes - ;; - *) - hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' - hardcode_libdir_separator_F77=: - hardcode_direct_F77=yes - export_dynamic_flag_spec_F77='${wl}-E' +_lt_libdeps_save_CFLAGS=$CFLAGS +case "$CC $CFLAGS " in #( +*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;; +*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;; +*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;; +esac - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L_F77=yes - ;; - esac - fi - ;; +if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + # Parse the compiler output and extract the necessary + # objects, libraries and library flags. - irix5* | irix6* | nonstopux*) - if test "$GCC" = yes; then - archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - archive_cmds_F77='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec_ld_F77='-rpath $libdir' - fi - hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator_F77=: - link_all_deplibs_F77=yes - ;; + # Sentinel used to keep track of whether or not we are before + # the conftest object file. + pre_test_object_deps_done=no - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else - archive_cmds_F77='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF - fi - hardcode_libdir_flag_spec_F77='-R$libdir' - hardcode_direct_F77=yes - hardcode_shlibpath_var_F77=no - ;; + for p in `eval "$output_verbose_link_cmd"`; do + case ${prev}${p} in - newsos6) - archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct_F77=yes - hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator_F77=: - hardcode_shlibpath_var_F77=no - ;; + -L* | -R* | -l*) + # Some compilers place space between "-{L,R}" and the path. + # Remove the space. + if test $p = "-L" || + test $p = "-R"; then + prev=$p + continue + fi - openbsd*) - hardcode_direct_F77=yes - hardcode_shlibpath_var_F77=no - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' - hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir' - export_dynamic_flag_spec_F77='${wl}-E' - else - case $host_os in - openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) - archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec_F77='-R$libdir' - ;; - *) - archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir' - ;; + # Expand the sysroot to ease extracting the directories later. + if test -z "$prev"; then + case $p in + -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;; + -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;; + -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;; + esac + fi + case $p in + =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;; esac - fi - ;; + if test "$pre_test_object_deps_done" = no; then + case ${prev} in + -L | -R) + # Internal compiler library paths should come after those + # provided the user. The postdeps already come after the + # user supplied libs so there is no need to process them. + if test -z "$compiler_lib_search_path_CXX"; then + compiler_lib_search_path_CXX="${prev}${p}" + else + compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}" + fi + ;; + # The "-l" case would never come before the object being + # linked, so don't bother handling this case. + esac + else + if test -z "$postdeps_CXX"; then + postdeps_CXX="${prev}${p}" + else + postdeps_CXX="${postdeps_CXX} ${prev}${p}" + fi + fi + prev= + ;; - os2*) - hardcode_libdir_flag_spec_F77='-L$libdir' - hardcode_minus_L_F77=yes - allow_undefined_flag_F77=unsupported - archive_cmds_F77='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - old_archive_From_new_cmds_F77='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' - ;; + *.lto.$objext) ;; # Ignore GCC LTO objects + *.$objext) + # This assumes that the test object file only shows up + # once in the compiler output. + if test "$p" = "conftest.$objext"; then + pre_test_object_deps_done=yes + continue + fi - osf3*) - if test "$GCC" = yes; then - allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - allow_undefined_flag_F77=' -expect_unresolved \*' - archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - fi - hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator_F77=: - ;; + if test "$pre_test_object_deps_done" = no; then + if test -z "$predep_objects_CXX"; then + predep_objects_CXX="$p" + else + predep_objects_CXX="$predep_objects_CXX $p" + fi + else + if test -z "$postdep_objects_CXX"; then + postdep_objects_CXX="$p" + else + postdep_objects_CXX="$postdep_objects_CXX $p" + fi + fi + ;; - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' - else - allow_undefined_flag_F77=' -expect_unresolved \*' - archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds_F77='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ - $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' + *) ;; # Ignore the rest. - # Both c and cxx compiler support -rpath directly - hardcode_libdir_flag_spec_F77='-rpath $libdir' - fi - hardcode_libdir_separator_F77=: - ;; + esac + done - sco3.2v5*) - archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var_F77=no - export_dynamic_flag_spec_F77='${wl}-Bexport' - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - ;; + # Clean up. + rm -f a.out a.exe +else + echo "libtool.m4: error: problem compiling CXX test program" +fi - solaris*) - no_undefined_flag_F77=' -z text' - if test "$GCC" = yes; then - wlarc='${wl}' - archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' - else - wlarc='' - archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - fi - hardcode_libdir_flag_spec_F77='-R$libdir' - hardcode_shlibpath_var_F77=no - case $host_os in - solaris2.[0-5] | solaris2.[0-5].*) ;; - *) - # The compiler driver will combine linker options so we - # cannot just pass the convience library names through - # without $wl, iff we do not link with $LD. - # Luckily, gcc supports the same syntax we need for Sun Studio. - # Supported since Solaris 2.6 (maybe 2.5.1?) - case $wlarc in - '') - whole_archive_flag_spec_F77='-z allextract$convenience -z defaultextract' ;; - *) - whole_archive_flag_spec_F77='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;; - esac ;; - esac - link_all_deplibs_F77=yes - ;; +$RM -f confest.$objext +CFLAGS=$_lt_libdeps_save_CFLAGS - sunos4*) - if test "x$host_vendor" = xsequent; then - # Use $CC to link under sequent, because it throws in some extra .o - # files that make .init and .fini sections work. - archive_cmds_F77='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds_F77='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' - fi - hardcode_libdir_flag_spec_F77='-L$libdir' - hardcode_direct_F77=yes - hardcode_minus_L_F77=yes - hardcode_shlibpath_var_F77=no - ;; +# PORTME: override above test on systems where it is broken +case $host_os in +interix[3-9]*) + # Interix 3.5 installs completely hosed .la files for C++, so rather than + # hack all around it, let's just trust "g++" to DTRT. + predep_objects_CXX= + postdep_objects_CXX= + postdeps_CXX= + ;; - sysv4) - case $host_vendor in - sni) - archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct_F77=yes # is this really true??? - ;; - siemens) - ## LD is ld it makes a PLAMLIB - ## CC just makes a GrossModule. - archive_cmds_F77='$LD -G -o $lib $libobjs $deplibs $linker_flags' - reload_cmds_F77='$CC -r -o $output$reload_objs' - hardcode_direct_F77=no - ;; - motorola) - archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct_F77=no #Motorola manual says yes, but my tests say they lie - ;; - esac - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var_F77=no +linux*) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C++ 5.9 + + # The more standards-conforming stlport4 library is + # incompatible with the Cstd library. Avoid specifying + # it if it's in CXXFLAGS. Ignore libCrun as + # -library=stlport4 depends on it. + case " $CXX $CXXFLAGS " in + *" -library=stlport4 "*) + solaris_use_stlport4=yes ;; + esac - sysv4.3*) - archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var_F77=no - export_dynamic_flag_spec_F77='-Bexport' - ;; + if test "$solaris_use_stlport4" != yes; then + postdeps_CXX='-library=Cstd -library=Crun' + fi + ;; + esac + ;; - sysv4*MP*) - if test -d /usr/nec; then - archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var_F77=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - ld_shlibs_F77=yes - fi +solaris*) + case $cc_basename in + CC* | sunCC*) + # The more standards-conforming stlport4 library is + # incompatible with the Cstd library. Avoid specifying + # it if it's in CXXFLAGS. Ignore libCrun as + # -library=stlport4 depends on it. + case " $CXX $CXXFLAGS " in + *" -library=stlport4 "*) + solaris_use_stlport4=yes ;; + esac - sysv4.2uw2*) - archive_cmds_F77='$LD -G -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct_F77=yes - hardcode_minus_L_F77=no - hardcode_shlibpath_var_F77=no - hardcode_runpath_var=yes - runpath_var=LD_RUN_PATH - ;; + # Adding this requires a known-good setup of shared libraries for + # Sun compiler versions before 5.6, else PIC objects from an old + # archive will be linked into the output, leading to subtle bugs. + if test "$solaris_use_stlport4" != yes; then + postdeps_CXX='-library=Cstd -library=Crun' + fi + ;; + esac + ;; +esac - sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*) - no_undefined_flag_F77='${wl}-z ${wl}text' - if test "$GCC" = yes; then - archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds_F77='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var_F77=no - ;; - sysv5*) - no_undefined_flag_F77=' -z text' - # $CC -shared without GNU ld will not create a library from C++ - # object files and a static libstdc++, better avoid it by now - archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - hardcode_libdir_flag_spec_F77= - hardcode_shlibpath_var_F77=no - runpath_var='LD_RUN_PATH' - ;; +case " $postdeps_CXX " in +*" -lc "*) archive_cmds_need_lc_CXX=no ;; +esac + compiler_lib_search_dirs_CXX= +if test -n "${compiler_lib_search_path_CXX}"; then + compiler_lib_search_dirs_CXX=`echo " ${compiler_lib_search_path_CXX}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` +fi - uts4*) - archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec_F77='-L$libdir' - hardcode_shlibpath_var_F77=no - ;; - *) - ld_shlibs_F77=no - ;; - esac - fi -echo "$as_me:$LINENO: result: $ld_shlibs_F77" >&5 -echo "${ECHO_T}$ld_shlibs_F77" >&6 -test "$ld_shlibs_F77" = no && can_build_shared=no -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi -# -# Do we need to explicitly link libc? -# -case "x$archive_cmds_need_lc_F77" in -x|xyes) - # Assume -lc should be added - archive_cmds_need_lc_F77=yes - if test "$enable_shared" = yes && test "$GCC" = yes; then - case $archive_cmds_F77 in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 -echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6 - $rm conftest* - printf "$lt_simple_compile_test_code" > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$lt_prog_compiler_wl_F77 - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$allow_undefined_flag_F77 - allow_undefined_flag_F77= - if { (eval echo "$as_me:$LINENO: \"$archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 - (eval $archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } - then - archive_cmds_need_lc_F77=no - else - archive_cmds_need_lc_F77=yes - fi - allow_undefined_flag_F77=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $rm conftest* - echo "$as_me:$LINENO: result: $archive_cmds_need_lc_F77" >&5 -echo "${ECHO_T}$archive_cmds_need_lc_F77" >&6 - ;; - esac - fi - ;; -esac -echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 -echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6 -library_names_spec= -libname_spec='lib$name' -soname_spec= -shrext_cmds=".so" -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -if test "$GCC" = yes; then - sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` - if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then - # if the path contains ";" then we assume it to be the separator - # otherwise default to the standard path separator (i.e. ":") - it is - # assumed that no part of a normal pathname contains ";" but that should - # okay in the real world where ";" in dirpaths is itself problematic. - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi -else - sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" -fi -need_lib_prefix=unknown -hardcode_into_libs=no -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -need_version=unknown -case $host_os in -aix3*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' - shlibpath_var=LIBPATH - # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}${shared_ext}$major' - ;; -aix4* | aix5*) - version_type=linux - need_lib_prefix=no - need_version=no - hardcode_into_libs=yes - if test "$host_cpu" = ia64; then - # AIX 5 supports IA64 - library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[01] | aix4.[01].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # AIX (on Power*) has no versioning support, so currently we can not hardcode correct - # soname into executable. Probably we can add versioning support to - # collect2, so additional links can be useful in future. - if test "$aix_use_runtimelinking" = yes; then - # If using run time linking (on AIX 4.2 or later) use lib.so - # instead of lib.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - else - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}${shared_ext}$major' - fi - shlibpath_var=LIBPATH - fi - ;; -amigaos*) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' - ;; -beos*) - library_names_spec='${libname}${shared_ext}' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; -bsdi[45]*) - version_type=linux - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; -cygwin* | mingw* | pw32*) - version_type=windows - shrext_cmds=".dll" - need_version=no - need_lib_prefix=no - case $GCC,$host_os in - yes,cygwin* | yes,mingw* | yes,pw32*) - library_names_spec='$libname.dll.a' - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname~ - chmod a+x \$dldir/$dlname' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $rm \$dlpath' - shlibpath_overrides_runpath=yes - case $host_os in - cygwin*) - # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" - ;; - mingw*) - # MinGW DLLs use traditional 'lib' prefix - soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` - if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then - # It is most probably a Windows format PATH printed by - # mingw gcc, but we are running on Cygwin. Gcc prints its search - # path with ; separators, and with drive letters. We can handle the - # drive letters (cygwin fileutils understands them), so leave them, - # especially as we might pass files found there to a mingw objdump, - # which wouldn't understand a cygwinified path. Ahh. - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi - ;; - pw32*) - # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - ;; - esac - ;; - linux*) - if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - supports_anon_versioning=no - case `$LD -v 2>/dev/null` in - *\ 01.* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 - *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... - *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... - *\ 2.11.*) ;; # other 2.11 versions - *) supports_anon_versioning=yes ;; - esac - if test $supports_anon_versioning = yes; then - archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~ -cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ -$echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' - else - $archive_expsym_cmds="$archive_cmds" - fi - else - ld_shlibs=no - fi - ;; - *) - library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' - ;; - esac - dynamic_linker='Win32 ld.exe' - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' - soname_spec='${libname}${release}${major}$shared_ext' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' - # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. - if test "$GCC" = yes; then - sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` - else - sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' - fi - sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' - ;; -dgux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; -freebsd1*) - dynamic_linker=no - ;; -kfreebsd*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='GNU ld.so' - ;; -freebsd* | dragonfly*) - # DragonFly does not have aout. When/if they implement a new - # versioning mechanism, adjust this. - if test -x /usr/bin/objformat; then - objformat=`/usr/bin/objformat` - else - case $host_os in - freebsd[123]*) objformat=aout ;; - *) objformat=elf ;; - esac - fi - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in - freebsd2*) - shlibpath_overrides_runpath=yes - ;; - freebsd3.[01]* | freebsdelf3.[01]*) - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - *) # from 3.2 on - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - esac - ;; -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - version_type=sunos - need_lib_prefix=no - need_version=no - case $host_cpu in - ia64*) - shrext_cmds='.so' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.so" - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - if test "X$HPUX_IA64_MODE" = X32; then - sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" - else - sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" - fi - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - hppa*64*) - shrext_cmds='.sl' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.sl" - shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - *) - shrext_cmds='.sl' - dynamic_linker="$host_os dld.sl" - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - ;; - esac - # HP-UX runs *really* slowly unless shared libraries are mode 555. - postinstall_cmds='chmod 555 $lib' - ;; -irix5* | irix6* | nonstopux*) - case $host_os in - nonstopux*) version_type=nonstopux ;; - *) - if test "$lt_cv_prog_gnu_ld" = yes; then - version_type=linux - else - version_type=irix - fi ;; - esac - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' - case $host_os in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") - libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") - libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") - libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" - hardcode_into_libs=yes - ;; -# No shared lib support for Linux oldld, aout, or coff. -linux*oldld* | linux*aout* | linux*coff*) - dynamic_linker=no - ;; -# This must be Linux ELF. -linux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - # Append ld.so.conf contents to the search path - if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` - sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" - fi + lt_prog_compiler_wl_CXX= +lt_prog_compiler_pic_CXX= +lt_prog_compiler_static_CXX= - case $host_cpu:$lt_cv_cc_64bit_output in - powerpc64:yes | s390x:yes | sparc64:yes | x86_64:yes) - sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /usr/X11R6/lib64" - sys_lib_search_path_spec="/lib64 /usr/lib64 /usr/local/lib64 /usr/X11R6/lib64" - ;; - esac - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' + # C++ specific cases for pic, static, wl, etc. + if test "$GXX" = yes; then + lt_prog_compiler_wl_CXX='-Wl,' + lt_prog_compiler_static_CXX='-static' - # Find out which ABI we are using (multilib Linux x86_64 hack). - libsuff= - case "$host_cpu" in - x86_64*) - echo '#line 15348 "configure"' > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - case `/usr/bin/file conftest.$ac_objext` in - *64-bit*) - libsuff=64 - ;; - esac - fi - rm -rf conftest* - ;; - *) - ;; - esac - sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}" - sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" - ;; - -knetbsd*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='GNU ld.so' - ;; - -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - -newsos6) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static_CXX='-Bstatic' + fi + ;; -nto-qnx*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + lt_prog_compiler_pic_CXX='-fPIC' + ;; + m68k) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4' + ;; + esac + ;; -openbsd*) - version_type=sunos - need_lib_prefix=no - # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. - case $host_os in - openbsd3.3 | openbsd3.3.*) need_version=yes ;; - *) need_version=no ;; - esac - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case $host_os in - openbsd2.[89] | openbsd2.[89].*) - shlibpath_overrides_runpath=no + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + mingw* | cygwin* | os2* | pw32* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + # Although the cygwin gcc ignores -fPIC, still need this for old-style + # (--disable-auto-import) libraries + lt_prog_compiler_pic_CXX='-DDLL_EXPORT' + ;; + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_prog_compiler_pic_CXX='-fno-common' + ;; + *djgpp*) + # DJGPP does not support shared libraries at all + lt_prog_compiler_pic_CXX= + ;; + haiku*) + # PIC is the default for Haiku. + # The "-static" flag exists, but is broken. + lt_prog_compiler_static_CXX= + ;; + interix[3-9]*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + sysv4*MP*) + if test -d /usr/nec; then + lt_prog_compiler_pic_CXX=-Kconform_pic + fi + ;; + hpux*) + # PIC is the default for 64-bit PA HP-UX, but not for 32-bit + # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag + # sets the default TLS model and affects inlining. + case $host_cpu in + hppa*64*) ;; *) - shlibpath_overrides_runpath=yes + lt_prog_compiler_pic_CXX='-fPIC' ;; esac - else - shlibpath_overrides_runpath=yes - fi - ;; - -os2*) - libname_spec='$name' - shrext_cmds=".dll" - need_lib_prefix=no - library_names_spec='$libname${shared_ext} $libname.a' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH - ;; - -osf3* | osf4* | osf5*) - version_type=osf - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" - ;; - -sco3.2v5*) - version_type=osf - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - ;; - -solaris*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; - -sunos4*) - version_type=sunos - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no - fi - need_version=yes - ;; - -sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - need_lib_prefix=no - export_dynamic_flag_spec='${wl}-Blargedynsym' - runpath_var=LD_RUN_PATH ;; - siemens) - need_lib_prefix=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; - esac - ;; - -sysv4*MP*) - if test -d /usr/nec ;then - version_type=linux - library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' - soname_spec='$libname${shared_ext}.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; - -uts4*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -*) - dynamic_linker=no - ;; -esac -echo "$as_me:$LINENO: result: $dynamic_linker" >&5 -echo "${ECHO_T}$dynamic_linker" >&6 -test "$dynamic_linker" = no && can_build_shared=no - -echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 -echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 -hardcode_action_F77= -if test -n "$hardcode_libdir_flag_spec_F77" || \ - test -n "$runpath_var_F77" || \ - test "X$hardcode_automatic_F77" = "Xyes" ; then - - # We can hardcode non-existant directories. - if test "$hardcode_direct_F77" != no && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, F77)" != no && - test "$hardcode_minus_L_F77" != no; then - # Linking always hardcodes the temporary library directory. - hardcode_action_F77=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - hardcode_action_F77=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - hardcode_action_F77=unsupported -fi -echo "$as_me:$LINENO: result: $hardcode_action_F77" >&5 -echo "${ECHO_T}$hardcode_action_F77" >&6 - -if test "$hardcode_action_F77" = relink; then - # Fast installation is not supported - enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then - # Fast installation is not necessary - enable_fast_install=needless -fi - -striplib= -old_striplib= -echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 -echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6 -if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 -else -# FIXME - insert some real tests, host_os isn't really good enough - case $host_os in - darwin*) - if test -n "$STRIP" ; then - striplib="$STRIP -x" - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - ;; - *) - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - ;; - esac -fi - - - -# The else clause should only fire when bootstrapping the -# libtool distribution, otherwise you forgot to ship ltmain.sh -# with your package, and you will get complaints that there are -# no rules to generate ltmain.sh. -if test -f "$ltmain"; then - # See if we are running on zsh, and set the options which allow our commands through - # without removal of \ escapes. - if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST - fi - # Now quote all the things that may contain metacharacters while being - # careful not to overquote the AC_SUBSTed values. We take copies of the - # variables and quote the copies for generation of the libtool script. - for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \ - SED SHELL STRIP \ - libname_spec library_names_spec soname_spec extract_expsyms_cmds \ - old_striplib striplib file_magic_cmd finish_cmds finish_eval \ - deplibs_check_method reload_flag reload_cmds need_locks \ - lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ - lt_cv_sys_global_symbol_to_c_name_address \ - sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ - old_postinstall_cmds old_postuninstall_cmds \ - compiler_F77 \ - CC_F77 \ - LD_F77 \ - lt_prog_compiler_wl_F77 \ - lt_prog_compiler_pic_F77 \ - lt_prog_compiler_static_F77 \ - lt_prog_compiler_no_builtin_flag_F77 \ - export_dynamic_flag_spec_F77 \ - thread_safe_flag_spec_F77 \ - whole_archive_flag_spec_F77 \ - enable_shared_with_static_runtimes_F77 \ - old_archive_cmds_F77 \ - old_archive_from_new_cmds_F77 \ - predep_objects_F77 \ - postdep_objects_F77 \ - predeps_F77 \ - postdeps_F77 \ - compiler_lib_search_path_F77 \ - archive_cmds_F77 \ - archive_expsym_cmds_F77 \ - postinstall_cmds_F77 \ - postuninstall_cmds_F77 \ - old_archive_from_expsyms_cmds_F77 \ - allow_undefined_flag_F77 \ - no_undefined_flag_F77 \ - export_symbols_cmds_F77 \ - hardcode_libdir_flag_spec_F77 \ - hardcode_libdir_flag_spec_ld_F77 \ - hardcode_libdir_separator_F77 \ - hardcode_automatic_F77 \ - module_cmds_F77 \ - module_expsym_cmds_F77 \ - lt_cv_prog_compiler_c_o_F77 \ - exclude_expsyms_F77 \ - include_expsyms_F77; do - - case $var in - old_archive_cmds_F77 | \ - old_archive_from_new_cmds_F77 | \ - archive_cmds_F77 | \ - archive_expsym_cmds_F77 | \ - module_cmds_F77 | \ - module_expsym_cmds_F77 | \ - old_archive_from_expsyms_cmds_F77 | \ - export_symbols_cmds_F77 | \ - extract_expsyms_cmds | reload_cmds | finish_cmds | \ - postinstall_cmds | postuninstall_cmds | \ - old_postinstall_cmds | old_postuninstall_cmds | \ - sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) - # Double-quote double-evaled strings. - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" + *qnx* | *nto*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + lt_prog_compiler_pic_CXX='-fPIC -shared' ;; *) - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" + lt_prog_compiler_pic_CXX='-fPIC' ;; esac - done - - case $lt_echo in - *'\$0 --fallback-echo"') - lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` - ;; - esac - -cfgfile="$ofile" - - cat <<__EOF__ >> "$cfgfile" -# ### BEGIN LIBTOOL TAG CONFIG: $tagname - -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: - -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL - -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared - -# Whether or not to build static libraries. -build_old_libs=$enable_static - -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$archive_cmds_need_lc_F77 - -# Whether or not to disallow shared libs when runtime libs are static -allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_F77 - -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install - -# The host system. -host_alias=$host_alias -host=$host -host_os=$host_os - -# The build system. -build_alias=$build_alias -build=$build -build_os=$build_os - -# An echo program that does not interpret backslashes. -echo=$lt_echo - -# The archiver. -AR=$lt_AR -AR_FLAGS=$lt_AR_FLAGS + else + case $host_os in + aix[4-9]*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static_CXX='-Bstatic' + else + lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp' + fi + ;; + chorus*) + case $cc_basename in + cxch68*) + # Green Hills C++ Compiler + # _LT_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" + ;; + esac + ;; + mingw* | cygwin* | os2* | pw32* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_prog_compiler_pic_CXX='-DDLL_EXPORT' + ;; + dgux*) + case $cc_basename in + ec++*) + lt_prog_compiler_pic_CXX='-KPIC' + ;; + ghcx*) + # Green Hills C++ Compiler + lt_prog_compiler_pic_CXX='-pic' + ;; + *) + ;; + esac + ;; + freebsd* | dragonfly*) + # FreeBSD uses GNU C++ + ;; + hpux9* | hpux10* | hpux11*) + case $cc_basename in + CC*) + lt_prog_compiler_wl_CXX='-Wl,' + lt_prog_compiler_static_CXX='${wl}-a ${wl}archive' + if test "$host_cpu" != ia64; then + lt_prog_compiler_pic_CXX='+Z' + fi + ;; + aCC*) + lt_prog_compiler_wl_CXX='-Wl,' + lt_prog_compiler_static_CXX='${wl}-a ${wl}archive' + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic_CXX='+Z' + ;; + esac + ;; + *) + ;; + esac + ;; + interix*) + # This is c89, which is MS Visual C++ (no shared libs) + # Anyone wants to do a port? + ;; + irix5* | irix6* | nonstopux*) + case $cc_basename in + CC*) + lt_prog_compiler_wl_CXX='-Wl,' + lt_prog_compiler_static_CXX='-non_shared' + # CC pic flag -KPIC is the default. + ;; + *) + ;; + esac + ;; + linux* | k*bsd*-gnu | kopensolaris*-gnu) + case $cc_basename in + KCC*) + # KAI C++ Compiler + lt_prog_compiler_wl_CXX='--backend -Wl,' + lt_prog_compiler_pic_CXX='-fPIC' + ;; + ecpc* ) + # old Intel C++ for x86_64 which still supported -KPIC. + lt_prog_compiler_wl_CXX='-Wl,' + lt_prog_compiler_pic_CXX='-KPIC' + lt_prog_compiler_static_CXX='-static' + ;; + icpc* ) + # Intel C++, used to be incompatible with GCC. + # ICC 10 doesn't accept -KPIC any more. + lt_prog_compiler_wl_CXX='-Wl,' + lt_prog_compiler_pic_CXX='-fPIC' + lt_prog_compiler_static_CXX='-static' + ;; + pgCC* | pgcpp*) + # Portland Group C++ compiler + lt_prog_compiler_wl_CXX='-Wl,' + lt_prog_compiler_pic_CXX='-fpic' + lt_prog_compiler_static_CXX='-Bstatic' + ;; + cxx*) + # Compaq C++ + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + lt_prog_compiler_pic_CXX= + lt_prog_compiler_static_CXX='-non_shared' + ;; + xlc* | xlC* | bgxl[cC]* | mpixl[cC]*) + # IBM XL 8.0, 9.0 on PPC and BlueGene + lt_prog_compiler_wl_CXX='-Wl,' + lt_prog_compiler_pic_CXX='-qpic' + lt_prog_compiler_static_CXX='-qstaticlink' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C++ 5.9 + lt_prog_compiler_pic_CXX='-KPIC' + lt_prog_compiler_static_CXX='-Bstatic' + lt_prog_compiler_wl_CXX='-Qoption ld ' + ;; + esac + ;; + esac + ;; + lynxos*) + ;; + m88k*) + ;; + mvs*) + case $cc_basename in + cxx*) + lt_prog_compiler_pic_CXX='-W c,exportall' + ;; + *) + ;; + esac + ;; + netbsd* | netbsdelf*-gnu) + ;; + *qnx* | *nto*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + lt_prog_compiler_pic_CXX='-fPIC -shared' + ;; + osf3* | osf4* | osf5*) + case $cc_basename in + KCC*) + lt_prog_compiler_wl_CXX='--backend -Wl,' + ;; + RCC*) + # Rational C++ 2.4.1 + lt_prog_compiler_pic_CXX='-pic' + ;; + cxx*) + # Digital/Compaq C++ + lt_prog_compiler_wl_CXX='-Wl,' + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + lt_prog_compiler_pic_CXX= + lt_prog_compiler_static_CXX='-non_shared' + ;; + *) + ;; + esac + ;; + psos*) + ;; + solaris*) + case $cc_basename in + CC* | sunCC*) + # Sun C++ 4.2, 5.x and Centerline C++ + lt_prog_compiler_pic_CXX='-KPIC' + lt_prog_compiler_static_CXX='-Bstatic' + lt_prog_compiler_wl_CXX='-Qoption ld ' + ;; + gcx*) + # Green Hills C++ Compiler + lt_prog_compiler_pic_CXX='-PIC' + ;; + *) + ;; + esac + ;; + sunos4*) + case $cc_basename in + CC*) + # Sun C++ 4.x + lt_prog_compiler_pic_CXX='-pic' + lt_prog_compiler_static_CXX='-Bstatic' + ;; + lcc*) + # Lucid + lt_prog_compiler_pic_CXX='-pic' + ;; + *) + ;; + esac + ;; + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + case $cc_basename in + CC*) + lt_prog_compiler_wl_CXX='-Wl,' + lt_prog_compiler_pic_CXX='-KPIC' + lt_prog_compiler_static_CXX='-Bstatic' + ;; + esac + ;; + tandem*) + case $cc_basename in + NCC*) + # NonStop-UX NCC 3.20 + lt_prog_compiler_pic_CXX='-KPIC' + ;; + *) + ;; + esac + ;; + vxworks*) + ;; + *) + lt_prog_compiler_can_build_shared_CXX=no + ;; + esac + fi -# A C compiler. -LTCC=$lt_LTCC +case $host_os in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + lt_prog_compiler_pic_CXX= + ;; + *) + lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC" + ;; +esac -# A language-specific compiler. -CC=$lt_compiler_F77 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 +$as_echo_n "checking for $compiler option to produce PIC... " >&6; } +if ${lt_cv_prog_compiler_pic_CXX+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_pic_CXX=$lt_prog_compiler_pic_CXX +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_CXX" >&5 +$as_echo "$lt_cv_prog_compiler_pic_CXX" >&6; } +lt_prog_compiler_pic_CXX=$lt_cv_prog_compiler_pic_CXX -# Is the compiler the GNU C compiler? -with_gcc=$GCC_F77 +# +# Check to make sure the PIC flag actually works. +# +if test -n "$lt_prog_compiler_pic_CXX"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5 +$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... " >&6; } +if ${lt_cv_prog_compiler_pic_works_CXX+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_pic_works_CXX=no + ac_outfile=conftest.$ac_objext + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_pic_works_CXX=yes + fi + fi + $RM conftest* -# An ERE matcher. -EGREP=$lt_EGREP +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works_CXX" >&5 +$as_echo "$lt_cv_prog_compiler_pic_works_CXX" >&6; } -# The linker used to build libraries. -LD=$lt_LD_F77 +if test x"$lt_cv_prog_compiler_pic_works_CXX" = xyes; then + case $lt_prog_compiler_pic_CXX in + "" | " "*) ;; + *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;; + esac +else + lt_prog_compiler_pic_CXX= + lt_prog_compiler_can_build_shared_CXX=no +fi -# Whether we need hard or soft links. -LN_S=$lt_LN_S +fi -# A BSD-compatible nm program. -NM=$lt_NM -# A symbol stripping program -STRIP=$lt_STRIP -# Used to examine libraries when file_magic_cmd begins "file" -MAGIC_CMD=$MAGIC_CMD -# Used on cygwin: DLL creation program. -DLLTOOL="$DLLTOOL" -# Used on cygwin: object dumper. -OBJDUMP="$OBJDUMP" +# +# Check to make sure the static flag actually works. +# +wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\" +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } +if ${lt_cv_prog_compiler_static_works_CXX+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_static_works_CXX=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $lt_tmp_static_flag" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&5 + $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_static_works_CXX=yes + fi + else + lt_cv_prog_compiler_static_works_CXX=yes + fi + fi + $RM -r conftest* + LDFLAGS="$save_LDFLAGS" -# Used on cygwin: assembler. -AS="$AS" +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works_CXX" >&5 +$as_echo "$lt_cv_prog_compiler_static_works_CXX" >&6; } -# The name of the directory that contains temporary libtool files. -objdir=$objdir +if test x"$lt_cv_prog_compiler_static_works_CXX" = xyes; then + : +else + lt_prog_compiler_static_CXX= +fi -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds -# How to pass a linker flag through the compiler. -wl=$lt_lt_prog_compiler_wl_F77 -# Object file suffix (normally "o"). -objext="$ac_objext" -# Old archive suffix (normally "a"). -libext="$libext" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 +$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +if ${lt_cv_prog_compiler_c_o_CXX+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_c_o_CXX=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext -# Shared library suffix (normally ".so"). -shrext_cmds='$shrext_cmds' + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o_CXX=yes + fi + fi + chmod u+w . 2>&5 + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* -# Executable file suffix (normally ""). -exeext="$exeext" +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5 +$as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; } -# Additional compiler flags for building library objects. -pic_flag=$lt_lt_prog_compiler_pic_F77 -pic_mode=$pic_mode -# What is the maximum length of a command? -max_cmd_len=$lt_cv_sys_max_cmd_len -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_lt_cv_prog_compiler_c_o_F77 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 +$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +if ${lt_cv_prog_compiler_c_o_CXX+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_c_o_CXX=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext -# Must we lock files when doing compilation? -need_locks=$lt_need_locks + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o_CXX=yes + fi + fi + chmod u+w . 2>&5 + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* -# Do we need the lib prefix for modules? -need_lib_prefix=$need_lib_prefix +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5 +$as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; } -# Do we need a version for libraries? -need_version=$need_version -# Whether dlopen is supported. -dlopen_support=$enable_dlopen -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static +hard_links="nottested" +if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 +$as_echo_n "checking if we can lock with hard links... " >&6; } + hard_links=yes + $RM conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 +$as_echo "$hard_links" >&6; } + if test "$hard_links" = no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 +$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} + need_locks=warn + fi +else + need_locks=no +fi -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_lt_prog_compiler_static_F77 -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_F77 -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_F77 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_whole_archive_flag_spec_F77 + export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' + case $host_os in + aix[4-9]*) + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + # Also, AIX nm treats weak defined symbols like other global defined + # symbols, whereas GNU nm marks them as "W". + if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then + export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + else + export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + fi + ;; + pw32*) + export_symbols_cmds_CXX="$ltdll_cmds" + ;; + cygwin* | mingw* | cegcc*) + case $cc_basename in + cl*) + exclude_expsyms_CXX='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' + ;; + *) + export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' + exclude_expsyms_CXX='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' + ;; + esac + ;; + linux* | k*bsd*-gnu | gnu*) + link_all_deplibs_CXX=no + ;; + *) + export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + ;; + esac -# Compiler flag to generate thread-safe objects. -thread_safe_flag_spec=$lt_thread_safe_flag_spec_F77 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5 +$as_echo "$ld_shlibs_CXX" >&6; } +test "$ld_shlibs_CXX" = no && can_build_shared=no -# Library versioning type. -version_type=$version_type +with_gnu_ld_CXX=$with_gnu_ld -# Format of library name prefix. -libname_spec=$lt_libname_spec -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME. -library_names_spec=$lt_library_names_spec -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec -# Commands used to build and install an old-style archive. -RANLIB=$lt_RANLIB -old_archive_cmds=$lt_old_archive_cmds_F77 -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_F77 -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_F77 +# +# Do we need to explicitly link libc? +# +case "x$archive_cmds_need_lc_CXX" in +x|xyes) + # Assume -lc should be added + archive_cmds_need_lc_CXX=yes -# Commands used to build and install a shared archive. -archive_cmds=$lt_archive_cmds_F77 -archive_expsym_cmds=$lt_archive_expsym_cmds_F77 -postinstall_cmds=$lt_postinstall_cmds -postuninstall_cmds=$lt_postuninstall_cmds + if test "$enable_shared" = yes && test "$GCC" = yes; then + case $archive_cmds_CXX in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 +$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } +if ${lt_cv_archive_cmds_need_lc_CXX+:} false; then : + $as_echo_n "(cached) " >&6 +else + $RM conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext -# Commands used to build a loadable module (assumed same as above if empty) -module_cmds=$lt_module_cmds_F77 -module_expsym_cmds=$lt_module_expsym_cmds_F77 + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_prog_compiler_wl_CXX + pic_flag=$lt_prog_compiler_pic_CXX + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$allow_undefined_flag_CXX + allow_undefined_flag_CXX= + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 + (eval $archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + then + lt_cv_archive_cmds_need_lc_CXX=no + else + lt_cv_archive_cmds_need_lc_CXX=yes + fi + allow_undefined_flag_CXX=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $RM conftest* -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc_CXX" >&5 +$as_echo "$lt_cv_archive_cmds_need_lc_CXX" >&6; } + archive_cmds_need_lc_CXX=$lt_cv_archive_cmds_need_lc_CXX + ;; + esac + fi + ;; +esac -# Dependencies to place before the objects being linked to create a -# shared library. -predep_objects=$lt_predep_objects_F77 - -# Dependencies to place after the objects being linked to create a -# shared library. -postdep_objects=$lt_postdep_objects_F77 - -# Dependencies to place before the objects being linked to create a -# shared library. -predeps=$lt_predeps_F77 - -# Dependencies to place after the objects being linked to create a -# shared library. -postdeps=$lt_postdeps_F77 -# The library search path used internally by the compiler when linking -# a shared library. -compiler_lib_search_path=$lt_compiler_lib_search_path_F77 -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method -# Command to use when deplibs_check_method == file_magic. -file_magic_cmd=$lt_file_magic_cmd -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_allow_undefined_flag_F77 -# Flag that forces no undefined symbols. -no_undefined_flag=$lt_no_undefined_flag_F77 -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds -# Same as above, but a single script fragment to be evaled but not shown. -finish_eval=$lt_finish_eval -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe -# Transform the output of nm in a proper C declaration -global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl -# Transform the output of nm in a C name address pair -global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address -# This is the shared library runtime path variable. -runpath_var=$runpath_var -# This is the shared library path variable. -shlibpath_var=$shlibpath_var -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath -# How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action_F77 -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_F77 -# If ld is used when linking, flag to hardcode \$libdir into -# a binary during linking. This must work even if \$libdir does -# not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_F77 - -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator=$lt_hardcode_libdir_separator_F77 - -# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the -# resulting binary. -hardcode_direct=$hardcode_direct_F77 - -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L=$hardcode_minus_L_F77 - -# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into -# the resulting binary. -hardcode_shlibpath_var=$hardcode_shlibpath_var_F77 - -# Set to yes if building a shared library automatically hardcodes DIR into the library -# and all subsequent libraries and executables linked against it. -hardcode_automatic=$hardcode_automatic_F77 -# Variables whose values should be saved in libtool wrapper scripts and -# restored at relink time. -variables_saved_for_relink="$variables_saved_for_relink" -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$link_all_deplibs_F77 -# Compile-time system search path for libraries -sys_lib_search_path_spec=$lt_sys_lib_search_path_spec -# Run-time system search path for libraries -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec -# Fix the shell variable \$srcfile for the compiler. -fix_srcfile_path="$fix_srcfile_path_F77" -# Set to yes if exported symbols are required. -always_export_symbols=$always_export_symbols_F77 -# The commands to list exported symbols. -export_symbols_cmds=$lt_export_symbols_cmds_F77 -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_exclude_expsyms_F77 -# Symbols that must always be exported. -include_expsyms=$lt_include_expsyms_F77 -# ### END LIBTOOL TAG CONFIG: $tagname -__EOF__ -else - # If there is no Makefile yet, we rely on a make rule to execute - # `config.status --recheck' to rerun these tests and create the - # libtool script then. - ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` - if test -f "$ltmain_in"; then - test -f Makefile && make "$ltmain" - fi -fi -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -CC="$lt_save_CC" - else - tagname="" - fi - ;; - GCJ) - if test -n "$GCJ" && test "X$GCJ" != "Xno"; then -# Source file extension for Java test sources. -ac_ext=java -# Object file extension for compiled Java test sources. -objext=o -objext_GCJ=$objext -# Code to be used in simple compile tests -lt_simple_compile_test_code="class foo {}\n" -# Code to be used in simple link tests -lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }\n' -# ltmain only uses $CC for tagged configurations so make sure $CC is set. -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} -# Allow CC to be a program name with arguments. -compiler=$CC -# save warnings/boilerplate of simple test code -ac_outfile=conftest.$ac_objext -printf "$lt_simple_compile_test_code" >conftest.$ac_ext -eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d' >conftest.err -_lt_compiler_boilerplate=`cat conftest.err` -$rm conftest* -ac_outfile=conftest.$ac_objext -printf "$lt_simple_link_test_code" >conftest.$ac_ext -eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d' >conftest.err -_lt_linker_boilerplate=`cat conftest.err` -$rm conftest* -# Allow CC to be a program name with arguments. -lt_save_CC="$CC" -CC=${GCJ-"gcj"} -compiler=$CC -compiler_GCJ=$CC -for cc_temp in $compiler""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` - - -# GCJ did not exist at the time GCC didn't implicitly link libc in. -archive_cmds_need_lc_GCJ=no - -old_archive_cmds_GCJ=$old_archive_cmds - - -lt_prog_compiler_no_builtin_flag_GCJ= -if test "$GCC" = yes; then - lt_prog_compiler_no_builtin_flag_GCJ=' -fno-builtin' - - -echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 -echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6 -if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_cv_prog_compiler_rtti_exceptions=no - ac_outfile=conftest.$ac_objext - printf "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="-fno-rtti -fno-exceptions" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:16114: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 - echo "$as_me:16118: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $echo "X$_lt_compiler_boilerplate" | $Xsed >conftest.exp - $SED '/^$/d' conftest.err >conftest.er2 - if test ! -s conftest.err || diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_rtti_exceptions=yes - fi - fi - $rm conftest* -fi -echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 -echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6 -if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then - lt_prog_compiler_no_builtin_flag_GCJ="$lt_prog_compiler_no_builtin_flag_GCJ -fno-rtti -fno-exceptions" -else - : -fi -fi -lt_prog_compiler_wl_GCJ= -lt_prog_compiler_pic_GCJ= -lt_prog_compiler_static_GCJ= -echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 -echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 - if test "$GCC" = yes; then - lt_prog_compiler_wl_GCJ='-Wl,' - lt_prog_compiler_static_GCJ='-static' - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static_GCJ='-Bstatic' - fi - ;; - amigaos*) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - lt_prog_compiler_pic_GCJ='-m68020 -resident32 -malways-restore-a4' - ;; - beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - mingw* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_prog_compiler_pic_GCJ='-DDLL_EXPORT' - ;; + { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 +$as_echo_n "checking dynamic linker characteristics... " >&6; } - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - lt_prog_compiler_pic_GCJ='-fno-common' - ;; +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=".so" +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +need_lib_prefix=unknown +hardcode_into_libs=no - msdosdjgpp*) - # Just because we use GCC doesn't mean we suddenly get shared libraries - # on systems that don't support them. - lt_prog_compiler_can_build_shared_GCJ=no - enable_shared=no - ;; +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown - sysv4*MP*) - if test -d /usr/nec; then - lt_prog_compiler_pic_GCJ=-Kconform_pic - fi - ;; +case $host_os in +aix3*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + shlibpath_var=LIBPATH - hpux*) - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic_GCJ='-fPIC' - ;; - esac - ;; + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}${shared_ext}$major' + ;; - *) - lt_prog_compiler_pic_GCJ='-fPIC' - ;; - esac +aix[4-9]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH else - # PORTME Check for flag to pass linker flags through the system compiler. + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. case $host_os in - aix*) - lt_prog_compiler_wl_GCJ='-Wl,' - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static_GCJ='-Bstatic' + aix4 | aix4.[01] | aix4.[01].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then + : else - lt_prog_compiler_static_GCJ='-bnso -bI:/lib/syscalls.exp' + can_build_shared=no fi ;; - darwin*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - case $cc_basename in - xlc*) - lt_prog_compiler_pic_GCJ='-qnocommon' - lt_prog_compiler_wl_GCJ='-Wl,' - ;; - esac - ;; - - mingw* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_prog_compiler_pic_GCJ='-DDLL_EXPORT' - ;; + esac + # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + if test "$aix_use_runtimelinking" = yes; then + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}${shared_ext}$major' + fi + shlibpath_var=LIBPATH + fi + ;; - hpux9* | hpux10* | hpux11*) - lt_prog_compiler_wl_GCJ='-Wl,' - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic_GCJ='+Z' - ;; - esac - # Is there a better lt_prog_compiler_static that works with the bundled CC? - lt_prog_compiler_static_GCJ='${wl}-a ${wl}archive' - ;; +amigaos*) + case $host_cpu in + powerpc) + # Since July 2007 AmigaOS4 officially supports .so libraries. + # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + ;; + m68k) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + esac + ;; - irix5* | irix6* | nonstopux*) - lt_prog_compiler_wl_GCJ='-Wl,' - # PIC (with -KPIC) is the default. - lt_prog_compiler_static_GCJ='-non_shared' - ;; +beos*) + library_names_spec='${libname}${shared_ext}' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; - newsos6) - lt_prog_compiler_pic_GCJ='-KPIC' - lt_prog_compiler_static_GCJ='-Bstatic' - ;; +bsdi[45]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; - linux*) - case $cc_basename in - icc* | ecc*) - lt_prog_compiler_wl_GCJ='-Wl,' - lt_prog_compiler_pic_GCJ='-KPIC' - lt_prog_compiler_static_GCJ='-static' - ;; - pgcc* | pgf77* | pgf90* | pgf95*) - # Portland Group compilers (*not* the Pentium gcc compiler, - # which looks to be a dead project) - lt_prog_compiler_wl_GCJ='-Wl,' - lt_prog_compiler_pic_GCJ='-fpic' - lt_prog_compiler_static_GCJ='-Bstatic' - ;; - ccc*) - lt_prog_compiler_wl_GCJ='-Wl,' - # All Alpha code is PIC. - lt_prog_compiler_static_GCJ='-non_shared' - ;; - esac - ;; +cygwin* | mingw* | pw32* | cegcc*) + version_type=windows + shrext_cmds=".dll" + need_version=no + need_lib_prefix=no - osf3* | osf4* | osf5*) - lt_prog_compiler_wl_GCJ='-Wl,' - # All OSF/1 code is PIC. - lt_prog_compiler_static_GCJ='-non_shared' - ;; + case $GCC,$cc_basename in + yes,*) + # gcc + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes - sco3.2v5*) - lt_prog_compiler_pic_GCJ='-Kpic' - lt_prog_compiler_static_GCJ='-dn' - ;; + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - solaris*) - lt_prog_compiler_pic_GCJ='-KPIC' - lt_prog_compiler_static_GCJ='-Bstatic' - case $cc_basename in - f77* | f90* | f95*) - lt_prog_compiler_wl_GCJ='-Qoption ld ';; - *) - lt_prog_compiler_wl_GCJ='-Wl,';; - esac ;; - - sunos4*) - lt_prog_compiler_wl_GCJ='-Qoption ld ' - lt_prog_compiler_pic_GCJ='-PIC' - lt_prog_compiler_static_GCJ='-Bstatic' + mingw* | cegcc*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; - - sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - lt_prog_compiler_wl_GCJ='-Wl,' - lt_prog_compiler_pic_GCJ='-KPIC' - lt_prog_compiler_static_GCJ='-Bstatic' + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; + esac + dynamic_linker='Win32 ld.exe' + ;; - sysv4*MP*) - if test -d /usr/nec ;then - lt_prog_compiler_pic_GCJ='-Kconform_pic' - lt_prog_compiler_static_GCJ='-Bstatic' - fi - ;; + *,cl*) + # Native MSVC + libname_spec='$name' + soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + library_names_spec='${libname}.dll.lib' - unicos*) - lt_prog_compiler_wl_GCJ='-Wl,' - lt_prog_compiler_can_build_shared_GCJ=no + case $build_os in + mingw*) + sys_lib_search_path_spec= + lt_save_ifs=$IFS + IFS=';' + for lt_path in $LIB + do + IFS=$lt_save_ifs + # Let DOS variable expansion print the short 8.3 style file name. + lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` + sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" + done + IFS=$lt_save_ifs + # Convert to MSYS style. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'` ;; - - uts4*) - lt_prog_compiler_pic_GCJ='-pic' - lt_prog_compiler_static_GCJ='-Bstatic' + cygwin*) + # Convert to unix form, then to dos form, then back to unix form + # but this time dos style (no spaces!) so that the unix form looks + # like /cygdrive/c/PROGRA~1:/cygdr... + sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` + sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` + sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ;; - *) - lt_prog_compiler_can_build_shared_GCJ=no + sys_lib_search_path_spec="$LIB" + if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then + # It is most probably a Windows format PATH. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + # FIXME: find the short name or the path components, as spaces are + # common. (e.g. "Program Files" -> "PROGRA~1") ;; esac - fi -echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_GCJ" >&5 -echo "${ECHO_T}$lt_prog_compiler_pic_GCJ" >&6 - -# -# Check to make sure the PIC flag actually works. -# -if test -n "$lt_prog_compiler_pic_GCJ"; then - -echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works" >&5 -echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works... $ECHO_C" >&6 -if test "${lt_prog_compiler_pic_works_GCJ+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_prog_compiler_pic_works_GCJ=no - ac_outfile=conftest.$ac_objext - printf "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="$lt_prog_compiler_pic_GCJ" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:16376: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 - echo "$as_me:16380: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $echo "X$_lt_compiler_boilerplate" | $Xsed >conftest.exp - $SED '/^$/d' conftest.err >conftest.er2 - if test ! -s conftest.err || diff conftest.exp conftest.er2 >/dev/null; then - lt_prog_compiler_pic_works_GCJ=yes - fi - fi - $rm conftest* - -fi -echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_GCJ" >&5 -echo "${ECHO_T}$lt_prog_compiler_pic_works_GCJ" >&6 - -if test x"$lt_prog_compiler_pic_works_GCJ" = xyes; then - case $lt_prog_compiler_pic_GCJ in - "" | " "*) ;; - *) lt_prog_compiler_pic_GCJ=" $lt_prog_compiler_pic_GCJ" ;; - esac -else - lt_prog_compiler_pic_GCJ= - lt_prog_compiler_can_build_shared_GCJ=no -fi - -fi -case $host_os in - # For platforms which do not support PIC, -DPIC is meaningless: - *djgpp*) - lt_prog_compiler_pic_GCJ= + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + dynamic_linker='Win32 link.exe' ;; + *) - lt_prog_compiler_pic_GCJ="$lt_prog_compiler_pic_GCJ" + # Assume MSVC wrapper + library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' + dynamic_linker='Win32 ld.exe' ;; -esac - -echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 -echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 -if test "${lt_cv_prog_compiler_c_o_GCJ+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_cv_prog_compiler_c_o_GCJ=no - $rm -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - printf "$lt_simple_compile_test_code" > conftest.$ac_ext + esac + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:16438: $lt_compile\"" >&5) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&5 - echo "$as_me:16442: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $echo "X$_lt_compiler_boilerplate" | $Xsed > out/conftest.exp - $SED '/^$/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.err || diff out/conftest.exp out/conftest.er2 >/dev/null; then - lt_cv_prog_compiler_c_o_GCJ=yes - fi - fi - chmod u+w . 2>&5 - $rm conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files - $rm out/* && rmdir out - cd .. - rmdir conftest - $rm conftest* +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' -fi -echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_GCJ" >&5 -echo "${ECHO_T}$lt_cv_prog_compiler_c_o_GCJ" >&6 + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; +dgux*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; -hard_links="nottested" -if test "$lt_cv_prog_compiler_c_o_GCJ" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 -echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6 - hard_links=yes - $rm conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - echo "$as_me:$LINENO: result: $hard_links" >&5 -echo "${ECHO_T}$hard_links" >&6 - if test "$hard_links" = no; then - { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 -echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} - need_locks=warn +freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[23].*) objformat=aout ;; + *) objformat=elf ;; + esac fi -else - need_locks=no -fi - -echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 -echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 - - runpath_var= - allow_undefined_flag_GCJ= - enable_shared_with_static_runtimes_GCJ=no - archive_cmds_GCJ= - archive_expsym_cmds_GCJ= - old_archive_From_new_cmds_GCJ= - old_archive_from_expsyms_cmds_GCJ= - export_dynamic_flag_spec_GCJ= - whole_archive_flag_spec_GCJ= - thread_safe_flag_spec_GCJ= - hardcode_libdir_flag_spec_GCJ= - hardcode_libdir_flag_spec_ld_GCJ= - hardcode_libdir_separator_GCJ= - hardcode_direct_GCJ=no - hardcode_minus_L_GCJ=no - hardcode_shlibpath_var_GCJ=unsupported - link_all_deplibs_GCJ=unknown - hardcode_automatic_GCJ=no - module_cmds_GCJ= - module_expsym_cmds_GCJ= - always_export_symbols_GCJ=no - export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - # include_expsyms should be a list of space-separated symbols to be *always* - # included in the symbol list - include_expsyms_GCJ= - # exclude_expsyms can be an extended regexp of symbols to exclude - # it will be wrapped by ` (' and `)$', so one must not match beginning or - # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', - # as well as any symbol that contains `d'. - exclude_expsyms_GCJ="_GLOBAL_OFFSET_TABLE_" - # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out - # platforms (ab)use it in PIC code, but their linkers get confused if - # the symbol is explicitly referenced. Since portable code cannot - # rely on this symbol name, it's probably fine to never include it in - # preloaded symbol tables. - extract_expsyms_cmds= - # Just being paranoid about ensuring that cc_basename is set. - for cc_temp in $compiler""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + need_version=yes + ;; esac -done -cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` - + shlibpath_var=LD_LIBRARY_PATH case $host_os in - cygwin* | mingw* | pw32*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no - fi + freebsd2.*) + shlibpath_overrides_runpath=yes ;; - openbsd*) - with_gnu_ld=no + freebsd3.[01]* | freebsdelf3.[01]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ + freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + *) # from 4.6 on, and DragonFly + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes ;; esac + ;; - ld_shlibs_GCJ=yes - if test "$with_gnu_ld" = yes; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' +gnu*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; - # Set some defaults for GNU ld with shared library support. These - # are reset later if shared libraries are not supported. Putting them - # here allows them to be overridden if necessary. - runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec_GCJ='${wl}--rpath ${wl}$libdir' - export_dynamic_flag_spec_GCJ='${wl}--export-dynamic' - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec_GCJ="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - whole_archive_flag_spec_GCJ= +haiku*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + dynamic_linker="$host_os runtime_loader" + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LIBRARY_PATH + shlibpath_overrides_runpath=yes + sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case $host_cpu in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + if test "X$HPUX_IA64_MODE" = X32; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" fi - supports_anon_versioning=no - case `$LD -v 2>/dev/null` in - *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 - *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... - *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... - *\ 2.11.*) ;; # other 2.11 versions - *) supports_anon_versioning=yes ;; - esac + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + ;; + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555, ... + postinstall_cmds='chmod 555 $lib' + # or fails outright, so override atomically: + install_override_mode=555 + ;; - # See if GNU ld supports shared libraries. - case $host_os in - aix3* | aix4* | aix5*) - # On AIX/PPC, the GNU linker is very broken - if test "$host_cpu" != ia64; then - ld_shlibs_GCJ=no - cat <&2 - -*** Warning: the GNU linker, at least up to release 2.9.1, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to modify your PATH -*** so that a non-GNU linker is found, and then restart. - -EOF - fi - ;; - - amigaos*) - archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec_GCJ='-L$libdir' - hardcode_minus_L_GCJ=yes - - # Samuel A. Falvo II reports - # that the semantics of dynamic libraries on AmigaOS, at least up - # to version 4, is to share data among multiple programs linked - # with the same dynamic library. Since this doesn't match the - # behavior of shared libraries on other platforms, we can't use - # them. - ld_shlibs_GCJ=no - ;; - - beos*) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - allow_undefined_flag_GCJ=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - archive_cmds_GCJ='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - ld_shlibs_GCJ=no - fi - ;; - - cygwin* | mingw* | pw32*) - # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, GCJ) is actually meaningless, - # as there is no search path for DLLs. - hardcode_libdir_flag_spec_GCJ='-L$libdir' - allow_undefined_flag_GCJ=unsupported - always_export_symbols_GCJ=no - enable_shared_with_static_runtimes_GCJ=yes - export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' - - if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then - archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - archive_expsym_cmds_GCJ='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' - else - ld_shlibs_GCJ=no - fi - ;; - - linux*) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - tmp_addflag= - case $cc_basename,$host_cpu in - pgcc*) # Portland Group C compiler - whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag' - ;; - pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers - whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag -Mnomain' ;; - ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 - tmp_addflag=' -i_dynamic' ;; - efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 - tmp_addflag=' -i_dynamic -nofor_main' ;; - ifc* | ifort*) # Intel Fortran compiler - tmp_addflag=' -nofor_main' ;; - esac - archive_cmds_GCJ='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - - if test $supports_anon_versioning = yes; then - archive_expsym_cmds_GCJ='$echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - $echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' - fi - else - ld_shlibs_GCJ=no - fi - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds_GCJ='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else - archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; - - solaris* | sysv5*) - if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then - ld_shlibs_GCJ=no - cat <&2 - -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -EOF - elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs_GCJ=no - fi - ;; - - sunos4*) - archive_cmds_GCJ='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' - wlarc= - hardcode_direct_GCJ=yes - hardcode_shlibpath_var_GCJ=no - ;; +interix[3-9]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; *) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs_GCJ=no - fi - ;; - esac - - if test "$ld_shlibs_GCJ" = no; then - runpath_var= - hardcode_libdir_flag_spec_GCJ= - export_dynamic_flag_spec_GCJ= - whole_archive_flag_spec_GCJ= - fi - else - # PORTME fill in a description of your system's linker (not GNU ld) - case $host_os in - aix3*) - allow_undefined_flag_GCJ=unsupported - always_export_symbols_GCJ=yes - archive_expsym_cmds_GCJ='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - hardcode_minus_L_GCJ=yes - if test "$GCC" = yes && test -z "$link_static_flag"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - hardcode_direct_GCJ=unsupported - fi - ;; - - aix4* | aix5*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - if $NM -V 2>&1 | grep 'GNU' > /dev/null; then - export_symbols_cmds_GCJ='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' - else - export_symbols_cmds_GCJ='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' - fi - aix_use_runtimelinking=no - - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[23]|aix4.[23].*|aix5*) - for ld_flag in $LDFLAGS; do - if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then - aix_use_runtimelinking=yes - break - fi - done - esac - - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - archive_cmds_GCJ='' - hardcode_direct_GCJ=yes - hardcode_libdir_separator_GCJ=':' - link_all_deplibs_GCJ=yes - - if test "$GCC" = yes; then - case $host_os in aix4.[012]|aix4.[012].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - hardcode_direct_GCJ=yes - else - # We have old collect2 - hardcode_direct_GCJ=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - hardcode_minus_L_GCJ=yes - hardcode_libdir_flag_spec_GCJ='-L$libdir' - hardcode_libdir_separator_GCJ= - fi - esac - shared_flag='-shared' - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' - fi - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' - else - shared_flag='${wl}-bM:SRE' - fi - fi - fi - - # It seems that -bexpall does not export symbols beginning with - # underscore (_), so it is better to generate a list of symbols to export. - always_export_symbols_GCJ=yes - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - allow_undefined_flag_GCJ='-berok' - # Determine the default libpath from the value encoded in an empty executable. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'`; fi -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi - - hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath" - archive_expsym_cmds_GCJ="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec_GCJ='${wl}-R $libdir:/usr/lib:/lib' - allow_undefined_flag_GCJ="-z nodefs" - archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" + if test "$lt_cv_prog_gnu_ld" = yes; then + version_type=linux # correct to gnu/linux during the next big refactor else - # Determine the default libpath from the value encoded in an empty executable. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'`; fi -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi - - hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - no_undefined_flag_GCJ=' ${wl}-bernotok' - allow_undefined_flag_GCJ=' ${wl}-berok' - # -bexpall does not export symbols beginning with underscore (_) - always_export_symbols_GCJ=yes - # Exported symbols can be pulled into shared objects from archives - whole_archive_flag_spec_GCJ=' ' - archive_cmds_need_lc_GCJ=yes - # This is similar to how AIX traditionally builds its shared libraries. - archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi - fi - ;; - - amigaos*) - archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec_GCJ='-L$libdir' - hardcode_minus_L_GCJ=yes - # see comment about different semantics on the GNU ld section - ld_shlibs_GCJ=no - ;; - - bsdi[45]*) - export_dynamic_flag_spec_GCJ=-rdynamic - ;; - - cygwin* | mingw* | pw32*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec_GCJ=' ' - allow_undefined_flag_GCJ=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - archive_cmds_GCJ='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - old_archive_From_new_cmds_GCJ='true' - # FIXME: Should let the user specify the lib program. - old_archive_cmds_GCJ='lib /OUT:$oldlib$oldobjs$old_deplibs' - fix_srcfile_path_GCJ='`cygpath -w "$srcfile"`' - enable_shared_with_static_runtimes_GCJ=yes - ;; - - darwin* | rhapsody*) - case $host_os in - rhapsody* | darwin1.[012]) - allow_undefined_flag_GCJ='${wl}-undefined ${wl}suppress' - ;; - *) # Darwin 1.3 on - if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then - allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' - else - case ${MACOSX_DEPLOYMENT_TARGET} in - 10.[012]) - allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' - ;; - 10.*) - allow_undefined_flag_GCJ='${wl}-undefined ${wl}dynamic_lookup' - ;; - esac - fi - ;; - esac - archive_cmds_need_lc_GCJ=no - hardcode_direct_GCJ=no - hardcode_automatic_GCJ=yes - hardcode_shlibpath_var_GCJ=unsupported - whole_archive_flag_spec_GCJ='' - link_all_deplibs_GCJ=yes - if test "$GCC" = yes ; then - output_verbose_link_cmd='echo' - archive_cmds_GCJ='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' - module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds - archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - else - case $cc_basename in - xlc*) - output_verbose_link_cmd='echo' - archive_cmds_GCJ='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' - module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds - archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - ;; - *) - ld_shlibs_GCJ=no - ;; - esac - fi - ;; + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + hardcode_into_libs=yes + ;; - dgux*) - archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec_GCJ='-L$libdir' - hardcode_shlibpath_var_GCJ=no - ;; +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; - freebsd1*) - ld_shlibs_GCJ=no - ;; - - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - hardcode_libdir_flag_spec_GCJ='-R$libdir' - hardcode_direct_GCJ=yes - hardcode_shlibpath_var_GCJ=no - ;; - - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2*) - archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct_GCJ=yes - hardcode_minus_L_GCJ=yes - hardcode_shlibpath_var_GCJ=no - ;; - - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd* | kfreebsd*-gnu | dragonfly*) - archive_cmds_GCJ='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec_GCJ='-R$libdir' - hardcode_direct_GCJ=yes - hardcode_shlibpath_var_GCJ=no - ;; - - hpux9*) - if test "$GCC" = yes; then - archive_cmds_GCJ='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - else - archive_cmds_GCJ='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - fi - hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' - hardcode_libdir_separator_GCJ=: - hardcode_direct_GCJ=yes - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L_GCJ=yes - export_dynamic_flag_spec_GCJ='${wl}-E' - ;; - - hpux10* | hpux11*) - if test "$GCC" = yes -a "$with_gnu_ld" = no; then - case $host_cpu in - hppa*64*|ia64*) - archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - else - case $host_cpu in - hppa*64*|ia64*) - archive_cmds_GCJ='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags' - ;; - *) - archive_cmds_GCJ='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' - ;; - esac - fi - if test "$with_gnu_ld" = no; then - case $host_cpu in - hppa*64*) - hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' - hardcode_libdir_flag_spec_ld_GCJ='+b $libdir' - hardcode_libdir_separator_GCJ=: - hardcode_direct_GCJ=no - hardcode_shlibpath_var_GCJ=no - ;; - ia64*) - hardcode_libdir_flag_spec_GCJ='-L$libdir' - hardcode_direct_GCJ=no - hardcode_shlibpath_var_GCJ=no - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L_GCJ=yes - ;; - *) - hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' - hardcode_libdir_separator_GCJ=: - hardcode_direct_GCJ=yes - export_dynamic_flag_spec_GCJ='${wl}-E' - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L_GCJ=yes - ;; - esac - fi - ;; - - irix5* | irix6* | nonstopux*) - if test "$GCC" = yes; then - archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - archive_cmds_GCJ='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec_ld_GCJ='-rpath $libdir' - fi - hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator_GCJ=: - link_all_deplibs_GCJ=yes - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else - archive_cmds_GCJ='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF - fi - hardcode_libdir_flag_spec_GCJ='-R$libdir' - hardcode_direct_GCJ=yes - hardcode_shlibpath_var_GCJ=no - ;; - - newsos6) - archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct_GCJ=yes - hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator_GCJ=: - hardcode_shlibpath_var_GCJ=no - ;; - - openbsd*) - hardcode_direct_GCJ=yes - hardcode_shlibpath_var_GCJ=no - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' - hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir' - export_dynamic_flag_spec_GCJ='${wl}-E' - else - case $host_os in - openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) - archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec_GCJ='-R$libdir' - ;; - *) - archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir' - ;; - esac - fi - ;; - - os2*) - hardcode_libdir_flag_spec_GCJ='-L$libdir' - hardcode_minus_L_GCJ=yes - allow_undefined_flag_GCJ=unsupported - archive_cmds_GCJ='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - old_archive_From_new_cmds_GCJ='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' - ;; - - osf3*) - if test "$GCC" = yes; then - allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - allow_undefined_flag_GCJ=' -expect_unresolved \*' - archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - fi - hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator_GCJ=: - ;; - - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' - else - allow_undefined_flag_GCJ=' -expect_unresolved \*' - archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds_GCJ='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ - $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' - - # Both c and cxx compiler support -rpath directly - hardcode_libdir_flag_spec_GCJ='-rpath $libdir' - fi - hardcode_libdir_separator_GCJ=: - ;; - - sco3.2v5*) - archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var_GCJ=no - export_dynamic_flag_spec_GCJ='${wl}-Bexport' - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - ;; - - solaris*) - no_undefined_flag_GCJ=' -z text' - if test "$GCC" = yes; then - wlarc='${wl}' - archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' - else - wlarc='' - archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - fi - hardcode_libdir_flag_spec_GCJ='-R$libdir' - hardcode_shlibpath_var_GCJ=no - case $host_os in - solaris2.[0-5] | solaris2.[0-5].*) ;; - *) - # The compiler driver will combine linker options so we - # cannot just pass the convience library names through - # without $wl, iff we do not link with $LD. - # Luckily, gcc supports the same syntax we need for Sun Studio. - # Supported since Solaris 2.6 (maybe 2.5.1?) - case $wlarc in - '') - whole_archive_flag_spec_GCJ='-z allextract$convenience -z defaultextract' ;; - *) - whole_archive_flag_spec_GCJ='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;; - esac ;; - esac - link_all_deplibs_GCJ=yes - ;; - - sunos4*) - if test "x$host_vendor" = xsequent; then - # Use $CC to link under sequent, because it throws in some extra .o - # files that make .init and .fini sections work. - archive_cmds_GCJ='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds_GCJ='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' - fi - hardcode_libdir_flag_spec_GCJ='-L$libdir' - hardcode_direct_GCJ=yes - hardcode_minus_L_GCJ=yes - hardcode_shlibpath_var_GCJ=no - ;; - - sysv4) - case $host_vendor in - sni) - archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct_GCJ=yes # is this really true??? - ;; - siemens) - ## LD is ld it makes a PLAMLIB - ## CC just makes a GrossModule. - archive_cmds_GCJ='$LD -G -o $lib $libobjs $deplibs $linker_flags' - reload_cmds_GCJ='$CC -r -o $output$reload_objs' - hardcode_direct_GCJ=no - ;; - motorola) - archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct_GCJ=no #Motorola manual says yes, but my tests say they lie - ;; - esac - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var_GCJ=no - ;; - - sysv4.3*) - archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var_GCJ=no - export_dynamic_flag_spec_GCJ='-Bexport' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var_GCJ=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - ld_shlibs_GCJ=yes - fi - ;; - - sysv4.2uw2*) - archive_cmds_GCJ='$LD -G -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct_GCJ=yes - hardcode_minus_L_GCJ=no - hardcode_shlibpath_var_GCJ=no - hardcode_runpath_var=yes - runpath_var=LD_RUN_PATH - ;; - - sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*) - no_undefined_flag_GCJ='${wl}-z ${wl}text' - if test "$GCC" = yes; then - archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds_GCJ='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var_GCJ=no - ;; - - sysv5*) - no_undefined_flag_GCJ=' -z text' - # $CC -shared without GNU ld will not create a library from C++ - # object files and a static libstdc++, better avoid it by now - archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - hardcode_libdir_flag_spec_GCJ= - hardcode_shlibpath_var_GCJ=no - runpath_var='LD_RUN_PATH' - ;; - - uts4*) - archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec_GCJ='-L$libdir' - hardcode_shlibpath_var_GCJ=no - ;; - - *) - ld_shlibs_GCJ=no - ;; - esac - fi - -echo "$as_me:$LINENO: result: $ld_shlibs_GCJ" >&5 -echo "${ECHO_T}$ld_shlibs_GCJ" >&6 -test "$ld_shlibs_GCJ" = no && can_build_shared=no - -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi - -# -# Do we need to explicitly link libc? -# -case "x$archive_cmds_need_lc_GCJ" in -x|xyes) - # Assume -lc should be added - archive_cmds_need_lc_GCJ=yes - - if test "$enable_shared" = yes && test "$GCC" = yes; then - case $archive_cmds_GCJ in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 -echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6 - $rm conftest* - printf "$lt_simple_compile_test_code" > conftest.$ac_ext - - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$lt_prog_compiler_wl_GCJ - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$allow_undefined_flag_GCJ - allow_undefined_flag_GCJ= - if { (eval echo "$as_me:$LINENO: \"$archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 - (eval $archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } - then - archive_cmds_need_lc_GCJ=no - else - archive_cmds_need_lc_GCJ=yes - fi - allow_undefined_flag_GCJ=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $rm conftest* - echo "$as_me:$LINENO: result: $archive_cmds_need_lc_GCJ" >&5 -echo "${ECHO_T}$archive_cmds_need_lc_GCJ" >&6 - ;; - esac - fi - ;; -esac - -echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 -echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6 -library_names_spec= -libname_spec='lib$name' -soname_spec= -shrext_cmds=".so" -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -if test "$GCC" = yes; then - sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` - if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then - # if the path contains ";" then we assume it to be the separator - # otherwise default to the standard path separator (i.e. ":") - it is - # assumed that no part of a normal pathname contains ";" but that should - # okay in the real world where ";" in dirpaths is itself problematic. - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi -else - sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" -fi -need_lib_prefix=unknown -hardcode_into_libs=no - -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -need_version=unknown - -case $host_os in -aix3*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' - shlibpath_var=LIBPATH - - # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}${shared_ext}$major' - ;; - -aix4* | aix5*) - version_type=linux - need_lib_prefix=no - need_version=no - hardcode_into_libs=yes - if test "$host_cpu" = ia64; then - # AIX 5 supports IA64 - library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[01] | aix4.[01].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # AIX (on Power*) has no versioning support, so currently we can not hardcode correct - # soname into executable. Probably we can add versioning support to - # collect2, so additional links can be useful in future. - if test "$aix_use_runtimelinking" = yes; then - # If using run time linking (on AIX 4.2 or later) use lib.so - # instead of lib.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - else - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}${shared_ext}$major' - fi - shlibpath_var=LIBPATH - fi - ;; - -amigaos*) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' - ;; - -beos*) - library_names_spec='${libname}${shared_ext}' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; - -bsdi[45]*) - version_type=linux - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; - -cygwin* | mingw* | pw32*) - version_type=windows - shrext_cmds=".dll" - need_version=no - need_lib_prefix=no - - case $GCC,$host_os in - yes,cygwin* | yes,mingw* | yes,pw32*) - library_names_spec='$libname.dll.a' - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname~ - chmod a+x \$dldir/$dlname' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $rm \$dlpath' - shlibpath_overrides_runpath=yes - - case $host_os in - cygwin*) - # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" - ;; - mingw*) - # MinGW DLLs use traditional 'lib' prefix - soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` - if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then - # It is most probably a Windows format PATH printed by - # mingw gcc, but we are running on Cygwin. Gcc prints its search - # path with ; separators, and with drive letters. We can handle the - # drive letters (cygwin fileutils understands them), so leave them, - # especially as we might pass files found there to a mingw objdump, - # which wouldn't understand a cygwinified path. Ahh. - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi - ;; - pw32*) - # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - ;; - esac - ;; - - linux*) - if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - supports_anon_versioning=no - case `$LD -v 2>/dev/null` in - *\ 01.* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 - *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... - *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... - *\ 2.11.*) ;; # other 2.11 versions - *) supports_anon_versioning=yes ;; - esac - if test $supports_anon_versioning = yes; then - archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~ -cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ -$echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' - else - $archive_expsym_cmds="$archive_cmds" - fi - else - ld_shlibs=no - fi - ;; - - *) - library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' - ;; - esac - dynamic_linker='Win32 ld.exe' - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; - -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' - soname_spec='${libname}${release}${major}$shared_ext' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' - # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. - if test "$GCC" = yes; then - sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` - else - sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' - fi - sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' - ;; - -dgux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -freebsd1*) - dynamic_linker=no - ;; - -kfreebsd*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='GNU ld.so' - ;; - -freebsd* | dragonfly*) - # DragonFly does not have aout. When/if they implement a new - # versioning mechanism, adjust this. - if test -x /usr/bin/objformat; then - objformat=`/usr/bin/objformat` - else - case $host_os in - freebsd[123]*) objformat=aout ;; - *) objformat=elf ;; - esac - fi - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in - freebsd2*) - shlibpath_overrides_runpath=yes - ;; - freebsd3.[01]* | freebsdelf3.[01]*) - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - *) # from 3.2 on - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - esac - ;; - -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - version_type=sunos - need_lib_prefix=no - need_version=no - case $host_cpu in - ia64*) - shrext_cmds='.so' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.so" - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - if test "X$HPUX_IA64_MODE" = X32; then - sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" - else - sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" - fi - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - hppa*64*) - shrext_cmds='.sl' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.sl" - shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - *) - shrext_cmds='.sl' - dynamic_linker="$host_os dld.sl" - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - ;; - esac - # HP-UX runs *really* slowly unless shared libraries are mode 555. - postinstall_cmds='chmod 555 $lib' - ;; - -irix5* | irix6* | nonstopux*) - case $host_os in - nonstopux*) version_type=nonstopux ;; - *) - if test "$lt_cv_prog_gnu_ld" = yes; then - version_type=linux - else - version_type=irix - fi ;; - esac - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' - case $host_os in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") - libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") - libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") - libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" - hardcode_into_libs=yes - ;; - -# No shared lib support for Linux oldld, aout, or coff. -linux*oldld* | linux*aout* | linux*coff*) - dynamic_linker=no - ;; - -# This must be Linux ELF. -linux*) - version_type=linux +# This must be glibc/ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu) + version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - - # Append ld.so.conf contents to the search path - if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` - sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" - fi - - case $host_cpu:$lt_cv_cc_64bit_output in - powerpc64:yes | s390x:yes | sparc64:yes | x86_64:yes) - sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /usr/X11R6/lib64" - sys_lib_search_path_spec="/lib64 /usr/lib64 /usr/local/lib64 /usr/X11R6/lib64" - ;; - esac - - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' - - # Find out which ABI we are using (multilib Linux x86_64 hack). - libsuff= - case "$host_cpu" in - x86_64*) - echo '#line 17877 "configure"' > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - case `/usr/bin/file conftest.$ac_objext` in - *64-bit*) - libsuff=64 - ;; - esac - fi - rm -rf conftest* - ;; - *) - ;; - esac - sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}" - sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" - ;; - -knetbsd*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='GNU ld.so' - ;; - -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - -newsos6) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -nto-qnx*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -openbsd*) - version_type=sunos - need_lib_prefix=no - # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. - case $host_os in - openbsd3.3 | openbsd3.3.*) need_version=yes ;; - *) need_version=no ;; - esac - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case $host_os in - openbsd2.[89] | openbsd2.[89].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac - else - shlibpath_overrides_runpath=yes - fi - ;; - -os2*) - libname_spec='$name' - shrext_cmds=".dll" - need_lib_prefix=no - library_names_spec='$libname${shared_ext} $libname.a' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH - ;; - -osf3* | osf4* | osf5*) - version_type=osf - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" - ;; - -sco3.2v5*) - version_type=osf - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - ;; - -solaris*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; - -sunos4*) - version_type=sunos - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no - fi - need_version=yes - ;; - -sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - need_lib_prefix=no - export_dynamic_flag_spec='${wl}-Blargedynsym' - runpath_var=LD_RUN_PATH - ;; - siemens) - need_lib_prefix=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; - esac - ;; - -sysv4*MP*) - if test -d /usr/nec ;then - version_type=linux - library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' - soname_spec='$libname${shared_ext}.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; - -uts4*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -*) - dynamic_linker=no - ;; -esac -echo "$as_me:$LINENO: result: $dynamic_linker" >&5 -echo "${ECHO_T}$dynamic_linker" >&6 -test "$dynamic_linker" = no && can_build_shared=no - -echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 -echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 -hardcode_action_GCJ= -if test -n "$hardcode_libdir_flag_spec_GCJ" || \ - test -n "$runpath_var_GCJ" || \ - test "X$hardcode_automatic_GCJ" = "Xyes" ; then - - # We can hardcode non-existant directories. - if test "$hardcode_direct_GCJ" != no && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, GCJ)" != no && - test "$hardcode_minus_L_GCJ" != no; then - # Linking always hardcodes the temporary library directory. - hardcode_action_GCJ=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - hardcode_action_GCJ=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - hardcode_action_GCJ=unsupported -fi -echo "$as_me:$LINENO: result: $hardcode_action_GCJ" >&5 -echo "${ECHO_T}$hardcode_action_GCJ" >&6 - -if test "$hardcode_action_GCJ" = relink; then - # Fast installation is not supported - enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then - # Fast installation is not necessary - enable_fast_install=needless -fi - -striplib= -old_striplib= -echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 -echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6 -if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 -else -# FIXME - insert some real tests, host_os isn't really good enough - case $host_os in - darwin*) - if test -n "$STRIP" ; then - striplib="$STRIP -x" - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - ;; - *) - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - ;; - esac -fi - -if test "x$enable_dlopen" != xyes; then - enable_dlopen=unknown - enable_dlopen_self=unknown - enable_dlopen_self_static=unknown -else - lt_cv_dlopen=no - lt_cv_dlopen_libs= - - case $host_os in - beos*) - lt_cv_dlopen="load_add_on" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ;; - - mingw* | pw32*) - lt_cv_dlopen="LoadLibrary" - lt_cv_dlopen_libs= - ;; - - cygwin*) - lt_cv_dlopen="dlopen" - lt_cv_dlopen_libs= - ;; - - darwin*) - # if libdl is installed we need to link against it - echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 -echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 -if test "${ac_cv_lib_dl_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldl $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dlopen (); -int -main () -{ -dlopen (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_dl_dlopen=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_dl_dlopen=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 -echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 -if test $ac_cv_lib_dl_dlopen = yes; then - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" -else - - lt_cv_dlopen="dyld" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - -fi - - ;; - - *) - echo "$as_me:$LINENO: checking for shl_load" >&5 -echo $ECHO_N "checking for shl_load... $ECHO_C" >&6 -if test "${ac_cv_func_shl_load+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define shl_load to an innocuous variant, in case declares shl_load. - For example, HP-UX 11i declares gettimeofday. */ -#define shl_load innocuous_shl_load - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char shl_load (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef shl_load - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -{ -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char shl_load (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_shl_load) || defined (__stub___shl_load) -choke me -#else -char (*f) () = shl_load; -#endif -#ifdef __cplusplus -} -#endif - -int -main () -{ -return f != shl_load; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_shl_load=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_func_shl_load=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 -echo "${ECHO_T}$ac_cv_func_shl_load" >&6 -if test $ac_cv_func_shl_load = yes; then - lt_cv_dlopen="shl_load" -else - echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 -echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6 -if test "${ac_cv_lib_dld_shl_load+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char shl_load (); -int -main () -{ -shl_load (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_dld_shl_load=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_dld_shl_load=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 -echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6 -if test $ac_cv_lib_dld_shl_load = yes; then - lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld" -else - echo "$as_me:$LINENO: checking for dlopen" >&5 -echo $ECHO_N "checking for dlopen... $ECHO_C" >&6 -if test "${ac_cv_func_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define dlopen to an innocuous variant, in case declares dlopen. - For example, HP-UX 11i declares gettimeofday. */ -#define dlopen innocuous_dlopen - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char dlopen (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef dlopen - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -{ -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dlopen (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_dlopen) || defined (__stub___dlopen) -choke me -#else -char (*f) () = dlopen; -#endif -#ifdef __cplusplus -} -#endif - -int -main () -{ -return f != dlopen; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_dlopen=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_func_dlopen=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 -echo "${ECHO_T}$ac_cv_func_dlopen" >&6 -if test $ac_cv_func_dlopen = yes; then - lt_cv_dlopen="dlopen" -else - echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 -echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 -if test "${ac_cv_lib_dl_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldl $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dlopen (); -int -main () -{ -dlopen (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_dl_dlopen=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_dl_dlopen=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 -echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 -if test $ac_cv_lib_dl_dlopen = yes; then - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" -else - echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 -echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6 -if test "${ac_cv_lib_svld_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lsvld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dlopen (); -int -main () -{ -dlopen (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_svld_dlopen=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_svld_dlopen=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 -echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6 -if test $ac_cv_lib_svld_dlopen = yes; then - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" -else - echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 -echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6 -if test "${ac_cv_lib_dld_dld_link+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dld_link (); + shlibpath_overrides_runpath=no + + # Some binutils ld are patched to set DT_RUNPATH + if ${lt_cv_shlibpath_overrides_runpath+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_shlibpath_overrides_runpath=no + save_LDFLAGS=$LDFLAGS + save_libdir=$libdir + eval "libdir=/foo; wl=\"$lt_prog_compiler_wl_CXX\"; \ + LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec_CXX\"" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + int main () { -dld_link (); + ; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_dld_dld_link=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_dld_dld_link=no +if ac_fn_cxx_try_link "$LINENO"; then : + if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : + lt_cv_shlibpath_overrides_runpath=yes fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 -echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6 -if test $ac_cv_lib_dld_dld_link = yes; then - lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld" +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$save_LDFLAGS + libdir=$save_libdir + fi + shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath -fi + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi -fi + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; +netbsdelf*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='NetBSD ld.elf_so' + ;; -fi +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; +*nto* | *qnx*) + version_type=qnx + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='ldqnx.so' + ;; -fi +openbsd*) + version_type=sunos + sys_lib_dlsearch_path_spec="/usr/lib" + need_lib_prefix=no + # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. + case $host_os in + openbsd3.3 | openbsd3.3.*) need_version=yes ;; + *) need_version=no ;; + esac + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case $host_os in + openbsd2.[89] | openbsd2.[89].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac + else + shlibpath_overrides_runpath=yes + fi + ;; + +os2*) + libname_spec='$name' + shrext_cmds=".dll" + need_lib_prefix=no + library_names_spec='$libname${shared_ext} $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; -fi +rdos*) + dynamic_linker=no + ;; - ;; +solaris*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.3*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; esac + ;; - if test "x$lt_cv_dlopen" != xno; then - enable_dlopen=yes +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' + soname_spec='$libname${shared_ext}.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + version_type=freebsd-elf + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + if test "$with_gnu_ld" = yes; then + sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' else - enable_dlopen=no + sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' + case $host_os in + sco3.2v5*) + sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" + ;; + esac fi + sys_lib_dlsearch_path_spec='/usr/lib' + ;; - case $lt_cv_dlopen in - dlopen) - save_CPPFLAGS="$CPPFLAGS" - test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" +tpf*) + # TPF is a cross-target only. Preferred cross-host = GNU/Linux. + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; - save_LDFLAGS="$LDFLAGS" - eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" +uts4*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; - save_LIBS="$LIBS" - LIBS="$lt_cv_dlopen_libs $LIBS" +*) + dynamic_linker=no + ;; +esac +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 +$as_echo "$dynamic_linker" >&6; } +test "$dynamic_linker" = no && can_build_shared=no + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then + sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" +fi +if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then + sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" +fi - echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 -echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6 -if test "${lt_cv_dlopen_self+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test "$cross_compiling" = yes; then : - lt_cv_dlopen_self=cross -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext < -#endif -#include -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif -#ifdef __cplusplus -extern "C" void exit (int); -#endif -void fnord() { int i=42;} -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - /* dlclose (self); */ - } - exit (status); -} -EOF - if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) >&5 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; - x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; - x$lt_unknown|x*) lt_cv_dlopen_self=no ;; - esac - else : - # compilation failed - lt_cv_dlopen_self=no - fi -fi -rm -fr conftest* -fi -echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 -echo "${ECHO_T}$lt_cv_dlopen_self" >&6 - if test "x$lt_cv_dlopen_self" = xyes; then - LDFLAGS="$LDFLAGS $link_static_flag" - echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 -echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6 -if test "${lt_cv_dlopen_self_static+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test "$cross_compiling" = yes; then : - lt_cv_dlopen_self_static=cross -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext < -#endif -#include -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif -#ifdef __cplusplus -extern "C" void exit (int); -#endif -void fnord() { int i=42;} -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - /* dlclose (self); */ - } - exit (status); -} -EOF - if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) >&5 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;; - esac - else : - # compilation failed - lt_cv_dlopen_self_static=no - fi -fi -rm -fr conftest* -fi -echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 -echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6 - fi - CPPFLAGS="$save_CPPFLAGS" - LDFLAGS="$save_LDFLAGS" - LIBS="$save_LIBS" - ;; - esac - case $lt_cv_dlopen_self in - yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; - *) enable_dlopen_self=unknown ;; - esac - case $lt_cv_dlopen_self_static in - yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; - *) enable_dlopen_self_static=unknown ;; - esac -fi -# The else clause should only fire when bootstrapping the -# libtool distribution, otherwise you forgot to ship ltmain.sh -# with your package, and you will get complaints that there are -# no rules to generate ltmain.sh. -if test -f "$ltmain"; then - # See if we are running on zsh, and set the options which allow our commands through - # without removal of \ escapes. - if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST - fi - # Now quote all the things that may contain metacharacters while being - # careful not to overquote the AC_SUBSTed values. We take copies of the - # variables and quote the copies for generation of the libtool script. - for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \ - SED SHELL STRIP \ - libname_spec library_names_spec soname_spec extract_expsyms_cmds \ - old_striplib striplib file_magic_cmd finish_cmds finish_eval \ - deplibs_check_method reload_flag reload_cmds need_locks \ - lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ - lt_cv_sys_global_symbol_to_c_name_address \ - sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ - old_postinstall_cmds old_postuninstall_cmds \ - compiler_GCJ \ - CC_GCJ \ - LD_GCJ \ - lt_prog_compiler_wl_GCJ \ - lt_prog_compiler_pic_GCJ \ - lt_prog_compiler_static_GCJ \ - lt_prog_compiler_no_builtin_flag_GCJ \ - export_dynamic_flag_spec_GCJ \ - thread_safe_flag_spec_GCJ \ - whole_archive_flag_spec_GCJ \ - enable_shared_with_static_runtimes_GCJ \ - old_archive_cmds_GCJ \ - old_archive_from_new_cmds_GCJ \ - predep_objects_GCJ \ - postdep_objects_GCJ \ - predeps_GCJ \ - postdeps_GCJ \ - compiler_lib_search_path_GCJ \ - archive_cmds_GCJ \ - archive_expsym_cmds_GCJ \ - postinstall_cmds_GCJ \ - postuninstall_cmds_GCJ \ - old_archive_from_expsyms_cmds_GCJ \ - allow_undefined_flag_GCJ \ - no_undefined_flag_GCJ \ - export_symbols_cmds_GCJ \ - hardcode_libdir_flag_spec_GCJ \ - hardcode_libdir_flag_spec_ld_GCJ \ - hardcode_libdir_separator_GCJ \ - hardcode_automatic_GCJ \ - module_cmds_GCJ \ - module_expsym_cmds_GCJ \ - lt_cv_prog_compiler_c_o_GCJ \ - exclude_expsyms_GCJ \ - include_expsyms_GCJ; do - - case $var in - old_archive_cmds_GCJ | \ - old_archive_from_new_cmds_GCJ | \ - archive_cmds_GCJ | \ - archive_expsym_cmds_GCJ | \ - module_cmds_GCJ | \ - module_expsym_cmds_GCJ | \ - old_archive_from_expsyms_cmds_GCJ | \ - export_symbols_cmds_GCJ | \ - extract_expsyms_cmds | reload_cmds | finish_cmds | \ - postinstall_cmds | postuninstall_cmds | \ - old_postinstall_cmds | old_postuninstall_cmds | \ - sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) - # Double-quote double-evaled strings. - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" - ;; - *) - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" - ;; - esac - done - case $lt_echo in - *'\$0 --fallback-echo"') - lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` - ;; - esac -cfgfile="$ofile" - cat <<__EOF__ >> "$cfgfile" -# ### BEGIN LIBTOOL TAG CONFIG: $tagname -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared -# Whether or not to build static libraries. -build_old_libs=$enable_static -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$archive_cmds_need_lc_GCJ -# Whether or not to disallow shared libs when runtime libs are static -allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_GCJ -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install -# The host system. -host_alias=$host_alias -host=$host -host_os=$host_os + { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 +$as_echo_n "checking how to hardcode library paths into programs... " >&6; } +hardcode_action_CXX= +if test -n "$hardcode_libdir_flag_spec_CXX" || + test -n "$runpath_var_CXX" || + test "X$hardcode_automatic_CXX" = "Xyes" ; then -# The build system. -build_alias=$build_alias -build=$build -build_os=$build_os + # We can hardcode non-existent directories. + if test "$hardcode_direct_CXX" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$_LT_TAGVAR(hardcode_shlibpath_var, CXX)" != no && + test "$hardcode_minus_L_CXX" != no; then + # Linking always hardcodes the temporary library directory. + hardcode_action_CXX=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + hardcode_action_CXX=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + hardcode_action_CXX=unsupported +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action_CXX" >&5 +$as_echo "$hardcode_action_CXX" >&6; } -# An echo program that does not interpret backslashes. -echo=$lt_echo +if test "$hardcode_action_CXX" = relink || + test "$inherit_rpath_CXX" = yes; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi -# The archiver. -AR=$lt_AR -AR_FLAGS=$lt_AR_FLAGS -# A C compiler. -LTCC=$lt_LTCC -# A language-specific compiler. -CC=$lt_compiler_GCJ -# Is the compiler the GNU C compiler? -with_gcc=$GCC_GCJ -# An ERE matcher. -EGREP=$lt_EGREP -# The linker used to build libraries. -LD=$lt_LD_GCJ -# Whether we need hard or soft links. -LN_S=$lt_LN_S + fi # test -n "$compiler" -# A BSD-compatible nm program. -NM=$lt_NM + CC=$lt_save_CC + CFLAGS=$lt_save_CFLAGS + LDCXX=$LD + LD=$lt_save_LD + GCC=$lt_save_GCC + with_gnu_ld=$lt_save_with_gnu_ld + lt_cv_path_LDCXX=$lt_cv_path_LD + lt_cv_path_LD=$lt_save_path_LD + lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld + lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld +fi # test "$_lt_caught_CXX_error" != yes -# A symbol stripping program -STRIP=$lt_STRIP +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu -# Used to examine libraries when file_magic_cmd begins "file" -MAGIC_CMD=$MAGIC_CMD -# Used on cygwin: DLL creation program. -DLLTOOL="$DLLTOOL" -# Used on cygwin: object dumper. -OBJDUMP="$OBJDUMP" -# Used on cygwin: assembler. -AS="$AS" -# The name of the directory that contains temporary libtool files. -objdir=$objdir -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds -# How to pass a linker flag through the compiler. -wl=$lt_lt_prog_compiler_wl_GCJ -# Object file suffix (normally "o"). -objext="$ac_objext" -# Old archive suffix (normally "a"). -libext="$libext" -# Shared library suffix (normally ".so"). -shrext_cmds='$shrext_cmds' -# Executable file suffix (normally ""). -exeext="$exeext" -# Additional compiler flags for building library objects. -pic_flag=$lt_lt_prog_compiler_pic_GCJ -pic_mode=$pic_mode -# What is the maximum length of a command? -max_cmd_len=$lt_cv_sys_max_cmd_len -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_lt_cv_prog_compiler_c_o_GCJ -# Must we lock files when doing compilation? -need_locks=$lt_need_locks + ac_config_commands="$ac_config_commands libtool" -# Do we need the lib prefix for modules? -need_lib_prefix=$need_lib_prefix -# Do we need a version for libraries? -need_version=$need_version -# Whether dlopen is supported. -dlopen_support=$enable_dlopen -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self +# Only expand once: + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 +$as_echo_n "checking whether build environment is sane... " >&6; } +# Just in case +sleep 1 +echo timestamp > conftest.file +# Reject unsafe characters in $srcdir or the absolute working directory +# name. Accept space and tab only in the latter. +am_lf=' +' +case `pwd` in + *[\\\"\#\$\&\'\`$am_lf]*) + as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; +esac +case $srcdir in + *[\\\"\#\$\&\'\`$am_lf\ \ ]*) + as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;; +esac + +# Do `set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + if test "$*" = "X"; then + # -L didn't work. + set X `ls -t "$srcdir/configure" conftest.file` + fi + rm -f conftest.file + if test "$*" != "X $srcdir/configure conftest.file" \ + && test "$*" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + as_fn_error $? "ls -t appears to fail. Make sure there is not a broken +alias in your environment" "$LINENO" 5 + fi + + test "$2" = conftest.file + ) +then + # Ok. + : +else + as_fn_error $? "newly created file is older than distributed files! +Check your system clock" "$LINENO" 5 +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +ac_ext=cpp +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu + + +# Extract the first word of "doxygen", so it can be a program name with args. +set dummy doxygen; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_HAVE_DOXYGEN+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$HAVE_DOXYGEN"; then + ac_cv_prog_HAVE_DOXYGEN="$HAVE_DOXYGEN" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_HAVE_DOXYGEN="true" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + test -z "$ac_cv_prog_HAVE_DOXYGEN" && ac_cv_prog_HAVE_DOXYGEN="false" +fi +fi +HAVE_DOXYGEN=$ac_cv_prog_HAVE_DOXYGEN +if test -n "$HAVE_DOXYGEN"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $HAVE_DOXYGEN" >&5 +$as_echo "$HAVE_DOXYGEN" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + if test $HAVE_DOXYGEN = "false"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: *** doxygen not found, code documentation will not be built" >&5 +$as_echo "$as_me: WARNING: *** doxygen not found, code documentation will not be built" >&2;} + fi + if $HAVE_DOXYGEN; then + HAVE_DOXYGEN_TRUE= + HAVE_DOXYGEN_FALSE='#' +else + HAVE_DOXYGEN_TRUE='#' + HAVE_DOXYGEN_FALSE= +fi -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_lt_prog_compiler_static_GCJ -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_GCJ -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_GCJ +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 +$as_echo_n "checking for ANSI C header files... " >&6; } +if ${ac_cv_header_stdc+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#include +#include -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_whole_archive_flag_spec_GCJ +int +main () +{ -# Compiler flag to generate thread-safe objects. -thread_safe_flag_spec=$lt_thread_safe_flag_spec_GCJ + ; + return 0; +} +_ACEOF +if ac_fn_cxx_try_compile "$LINENO"; then : + ac_cv_header_stdc=yes +else + ac_cv_header_stdc=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -# Library versioning type. -version_type=$version_type +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include -# Format of library name prefix. -libname_spec=$lt_libname_spec +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "memchr" >/dev/null 2>&1; then : -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME. -library_names_spec=$lt_library_names_spec +else + ac_cv_header_stdc=no +fi +rm -f conftest* -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec +fi -# Commands used to build and install an old-style archive. -RANLIB=$lt_RANLIB -old_archive_cmds=$lt_old_archive_cmds_GCJ -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_GCJ +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "free" >/dev/null 2>&1; then : -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_GCJ +else + ac_cv_header_stdc=no +fi +rm -f conftest* -# Commands used to build and install a shared archive. -archive_cmds=$lt_archive_cmds_GCJ -archive_expsym_cmds=$lt_archive_expsym_cmds_GCJ -postinstall_cmds=$lt_postinstall_cmds -postuninstall_cmds=$lt_postuninstall_cmds +fi -# Commands used to build a loadable module (assumed same as above if empty) -module_cmds=$lt_module_cmds_GCJ -module_expsym_cmds=$lt_module_expsym_cmds_GCJ +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. + if test "$cross_compiling" = yes; then : + : +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#if ((' ' & 0x0FF) == 0x020) +# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#else +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) +# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +#endif -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int +main () +{ + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + return 2; + return 0; +} +_ACEOF +if ac_fn_cxx_try_run "$LINENO"; then : -# Dependencies to place before the objects being linked to create a -# shared library. -predep_objects=$lt_predep_objects_GCJ - -# Dependencies to place after the objects being linked to create a -# shared library. -postdep_objects=$lt_postdep_objects_GCJ - -# Dependencies to place before the objects being linked to create a -# shared library. -predeps=$lt_predeps_GCJ - -# Dependencies to place after the objects being linked to create a -# shared library. -postdeps=$lt_postdeps_GCJ +else + ac_cv_header_stdc=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi -# The library search path used internally by the compiler when linking -# a shared library. -compiler_lib_search_path=$lt_compiler_lib_search_path_GCJ +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 +$as_echo "$ac_cv_header_stdc" >&6; } +if test $ac_cv_header_stdc = yes; then -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method +$as_echo "#define STDC_HEADERS 1" >>confdefs.h -# Command to use when deplibs_check_method == file_magic. -file_magic_cmd=$lt_file_magic_cmd +fi -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_allow_undefined_flag_GCJ +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for stdbool.h that conforms to C99" >&5 +$as_echo_n "checking for stdbool.h that conforms to C99... " >&6; } +if ${ac_cv_header_stdbool_h+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ -# Flag that forces no undefined symbols. -no_undefined_flag=$lt_no_undefined_flag_GCJ +#include +#ifndef bool + "error: bool is not defined" +#endif +#ifndef false + "error: false is not defined" +#endif +#if false + "error: false is not 0" +#endif +#ifndef true + "error: true is not defined" +#endif +#if true != 1 + "error: true is not 1" +#endif +#ifndef __bool_true_false_are_defined + "error: __bool_true_false_are_defined is not defined" +#endif -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds + struct s { _Bool s: 1; _Bool t; } s; -# Same as above, but a single script fragment to be evaled but not shown. -finish_eval=$lt_finish_eval + char a[true == 1 ? 1 : -1]; + char b[false == 0 ? 1 : -1]; + char c[__bool_true_false_are_defined == 1 ? 1 : -1]; + char d[(bool) 0.5 == true ? 1 : -1]; + /* See body of main program for 'e'. */ + char f[(_Bool) 0.0 == false ? 1 : -1]; + char g[true]; + char h[sizeof (_Bool)]; + char i[sizeof s.t]; + enum { j = false, k = true, l = false * true, m = true * 256 }; + /* The following fails for + HP aC++/ANSI C B3910B A.05.55 [Dec 04 2003]. */ + _Bool n[m]; + char o[sizeof n == m * sizeof n[0] ? 1 : -1]; + char p[-1 - (_Bool) 0 < 0 && -1 - (bool) 0 < 0 ? 1 : -1]; + /* Catch a bug in an HP-UX C compiler. See + http://gcc.gnu.org/ml/gcc-patches/2003-12/msg02303.html + http://lists.gnu.org/archive/html/bug-coreutils/2005-11/msg00161.html + */ + _Bool q = true; + _Bool *pq = &q; -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe +int +main () +{ -# Transform the output of nm in a proper C declaration -global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + bool e = &s; + *pq |= q; + *pq |= ! q; + /* Refer to every declared value, to avoid compiler optimizations. */ + return (!a + !b + !c + !d + !e + !f + !g + !h + !i + !!j + !k + !!l + + !m + !n + !o + !p + !q + !pq); -# Transform the output of nm in a C name address pair -global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + ; + return 0; +} +_ACEOF +if ac_fn_cxx_try_compile "$LINENO"; then : + ac_cv_header_stdbool_h=yes +else + ac_cv_header_stdbool_h=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdbool_h" >&5 +$as_echo "$ac_cv_header_stdbool_h" >&6; } +ac_fn_cxx_check_type "$LINENO" "_Bool" "ac_cv_type__Bool" "$ac_includes_default" +if test "x$ac_cv_type__Bool" = xyes; then : -# This is the shared library runtime path variable. -runpath_var=$runpath_var +cat >>confdefs.h <<_ACEOF +#define HAVE__BOOL 1 +_ACEOF -# This is the shared library path variable. -shlibpath_var=$shlibpath_var -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath +fi -# How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action_GCJ +if test $ac_cv_header_stdbool_h = yes; then -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs +$as_echo "#define HAVE_STDBOOL_H 1" >>confdefs.h -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_GCJ +fi -# If ld is used when linking, flag to hardcode \$libdir into -# a binary during linking. This must work even if \$libdir does -# not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_GCJ - -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator=$lt_hardcode_libdir_separator_GCJ - -# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the -# resulting binary. -hardcode_direct=$hardcode_direct_GCJ - -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L=$hardcode_minus_L_GCJ - -# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into -# the resulting binary. -hardcode_shlibpath_var=$hardcode_shlibpath_var_GCJ - -# Set to yes if building a shared library automatically hardcodes DIR into the library -# and all subsequent libraries and executables linked against it. -hardcode_automatic=$hardcode_automatic_GCJ +for ac_header in stdint.h unistd.h fcntl.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_cxx_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF -# Variables whose values should be saved in libtool wrapper scripts and -# restored at relink time. -variables_saved_for_relink="$variables_saved_for_relink" +fi -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$link_all_deplibs_GCJ +done -# Compile-time system search path for libraries -sys_lib_search_path_spec=$lt_sys_lib_search_path_spec -# Run-time system search path for libraries -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec -# Fix the shell variable \$srcfile for the compiler. -fix_srcfile_path="$fix_srcfile_path_GCJ" +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for png_read_info in -lpng" >&5 +$as_echo_n "checking for png_read_info in -lpng... " >&6; } +if ${ac_cv_lib_png_png_read_info+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lpng $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ -# Set to yes if exported symbols are required. -always_export_symbols=$always_export_symbols_GCJ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char png_read_info (); +int +main () +{ +return png_read_info (); + ; + return 0; +} +_ACEOF +if ac_fn_cxx_try_link "$LINENO"; then : + ac_cv_lib_png_png_read_info=yes +else + ac_cv_lib_png_png_read_info=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_png_png_read_info" >&5 +$as_echo "$ac_cv_lib_png_png_read_info" >&6; } +if test "x$ac_cv_lib_png_png_read_info" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBPNG 1 +_ACEOF -# The commands to list exported symbols. -export_symbols_cmds=$lt_export_symbols_cmds_GCJ + LIBS="-lpng $LIBS" -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds +fi -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_exclude_expsyms_GCJ +ac_fn_cxx_check_header_mongrel "$LINENO" "png.h" "ac_cv_header_png_h" "$ac_includes_default" +if test "x$ac_cv_header_png_h" = xyes; then : -# Symbols that must always be exported. -include_expsyms=$lt_include_expsyms_GCJ +fi -# ### END LIBTOOL TAG CONFIG: $tagname -__EOF__ +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for clock_gettime in -lrt" >&5 +$as_echo_n "checking for clock_gettime in -lrt... " >&6; } +if ${ac_cv_lib_rt_clock_gettime+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lrt $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char clock_gettime (); +int +main () +{ +return clock_gettime (); + ; + return 0; +} +_ACEOF +if ac_fn_cxx_try_link "$LINENO"; then : + ac_cv_lib_rt_clock_gettime=yes else - # If there is no Makefile yet, we rely on a make rule to execute - # `config.status --recheck' to rerun these tests and create the - # libtool script then. - ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` - if test -f "$ltmain_in"; then - test -f Makefile && make "$ltmain" - fi + ac_cv_lib_rt_clock_gettime=no fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_rt_clock_gettime" >&5 +$as_echo "$ac_cv_lib_rt_clock_gettime" >&6; } +if test "x$ac_cv_lib_rt_clock_gettime" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBRT 1 +_ACEOF + LIBS="-lrt $LIBS" -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -CC="$lt_save_CC" - - else - tagname="" - fi - ;; - - RC) +fi -# Source file extension for RC test sources. -ac_ext=rc +ac_config_files="$ac_config_files Makefile libcoyotl.pc libcoyotl/Makefile test/Makefile docs/Makefile" -# Object file extension for compiled RC test sources. -objext=o -objext_RC=$objext +cat >confcache <<\_ACEOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs, see configure's option --config-cache. +# It is not useful on other systems. If it contains results you don't +# want to keep, you may remove or edit it. +# +# config.status only pays attention to the cache file if you give it +# the --recheck option to rerun configure. +# +# `ac_cv_env_foo' variables (set or unset) will be overridden when +# loading this file, other *unset* `ac_cv_foo' will be assigned the +# following values. -# Code to be used in simple compile tests -lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n' +_ACEOF -# Code to be used in simple link tests -lt_simple_link_test_code="$lt_simple_compile_test_code" +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, we kill variables containing newlines. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +( + for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done -# ltmain only uses $CC for tagged configurations so make sure $CC is set. + (set) 2>&1 | + case $as_nl`(ac_space=' '; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + # `set' does not quote correctly, so add quotes: double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \. + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" + ;; #( + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) | + sed ' + /^ac_cv_env_/b end + t clear + :clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end + s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + :end' >>confcache +if diff "$cache_file" confcache >/dev/null 2>&1; then :; else + if test -w "$cache_file"; then + if test "x$cache_file" != "x/dev/null"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 +$as_echo "$as_me: updating cache $cache_file" >&6;} + if test ! -f "$cache_file" || test -h "$cache_file"; then + cat confcache >"$cache_file" + else + case $cache_file in #( + */* | ?:*) + mv -f confcache "$cache_file"$$ && + mv -f "$cache_file"$$ "$cache_file" ;; #( + *) + mv -f confcache "$cache_file" ;; + esac + fi + fi + else + { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 +$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} + fi +fi +rm -f confcache -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' -# Allow CC to be a program name with arguments. -compiler=$CC +# Transform confdefs.h into DEFS. +# Protect against shell expansion while executing Makefile rules. +# Protect against Makefile macro expansion. +# +# If the first sed substitution is executed (which looks for macros that +# take arguments), then branch to the quote section. Otherwise, +# look for a macro that doesn't take arguments. +ac_script=' +:mline +/\\$/{ + N + s,\\\n,, + b mline +} +t clear +:clear +s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g +t quote +s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g +t quote +b any +:quote +s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g +s/\[/\\&/g +s/\]/\\&/g +s/\$/$$/g +H +:any +${ + g + s/^\n// + s/\n/ /g + p +} +' +DEFS=`sed -n "$ac_script" confdefs.h` -# save warnings/boilerplate of simple test code -ac_outfile=conftest.$ac_objext -printf "$lt_simple_compile_test_code" >conftest.$ac_ext -eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d' >conftest.err -_lt_compiler_boilerplate=`cat conftest.err` -$rm conftest* +ac_libobjs= +ac_ltlibobjs= +U= +for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' + ac_i=`$as_echo "$ac_i" | sed "$ac_script"` + # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR + # will be set to the directory where LIBOBJS objects are built. + as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" + as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' +done +LIBOBJS=$ac_libobjs -ac_outfile=conftest.$ac_objext -printf "$lt_simple_link_test_code" >conftest.$ac_ext -eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d' >conftest.err -_lt_linker_boilerplate=`cat conftest.err` -$rm conftest* +LTLIBOBJS=$ac_ltlibobjs -# Allow CC to be a program name with arguments. -lt_save_CC="$CC" -CC=${RC-"windres"} -compiler=$CC -compiler_RC=$CC -for cc_temp in $compiler""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` + if test -n "$EXEEXT"; then + am__EXEEXT_TRUE= + am__EXEEXT_FALSE='#' +else + am__EXEEXT_TRUE='#' + am__EXEEXT_FALSE= +fi -lt_cv_prog_compiler_c_o_RC=yes +if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then + as_fn_error $? "conditional \"AMDEP\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then + as_fn_error $? "conditional \"am__fastdepCC\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then + as_fn_error $? "conditional \"am__fastdepCXX\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${HAVE_DOXYGEN_TRUE}" && test -z "${HAVE_DOXYGEN_FALSE}"; then + as_fn_error $? "conditional \"HAVE_DOXYGEN\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi -# The else clause should only fire when bootstrapping the -# libtool distribution, otherwise you forgot to ship ltmain.sh -# with your package, and you will get complaints that there are -# no rules to generate ltmain.sh. -if test -f "$ltmain"; then - # See if we are running on zsh, and set the options which allow our commands through - # without removal of \ escapes. - if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST - fi - # Now quote all the things that may contain metacharacters while being - # careful not to overquote the AC_SUBSTed values. We take copies of the - # variables and quote the copies for generation of the libtool script. - for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \ - SED SHELL STRIP \ - libname_spec library_names_spec soname_spec extract_expsyms_cmds \ - old_striplib striplib file_magic_cmd finish_cmds finish_eval \ - deplibs_check_method reload_flag reload_cmds need_locks \ - lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ - lt_cv_sys_global_symbol_to_c_name_address \ - sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ - old_postinstall_cmds old_postuninstall_cmds \ - compiler_RC \ - CC_RC \ - LD_RC \ - lt_prog_compiler_wl_RC \ - lt_prog_compiler_pic_RC \ - lt_prog_compiler_static_RC \ - lt_prog_compiler_no_builtin_flag_RC \ - export_dynamic_flag_spec_RC \ - thread_safe_flag_spec_RC \ - whole_archive_flag_spec_RC \ - enable_shared_with_static_runtimes_RC \ - old_archive_cmds_RC \ - old_archive_from_new_cmds_RC \ - predep_objects_RC \ - postdep_objects_RC \ - predeps_RC \ - postdeps_RC \ - compiler_lib_search_path_RC \ - archive_cmds_RC \ - archive_expsym_cmds_RC \ - postinstall_cmds_RC \ - postuninstall_cmds_RC \ - old_archive_from_expsyms_cmds_RC \ - allow_undefined_flag_RC \ - no_undefined_flag_RC \ - export_symbols_cmds_RC \ - hardcode_libdir_flag_spec_RC \ - hardcode_libdir_flag_spec_ld_RC \ - hardcode_libdir_separator_RC \ - hardcode_automatic_RC \ - module_cmds_RC \ - module_expsym_cmds_RC \ - lt_cv_prog_compiler_c_o_RC \ - exclude_expsyms_RC \ - include_expsyms_RC; do - - case $var in - old_archive_cmds_RC | \ - old_archive_from_new_cmds_RC | \ - archive_cmds_RC | \ - archive_expsym_cmds_RC | \ - module_cmds_RC | \ - module_expsym_cmds_RC | \ - old_archive_from_expsyms_cmds_RC | \ - export_symbols_cmds_RC | \ - extract_expsyms_cmds | reload_cmds | finish_cmds | \ - postinstall_cmds | postuninstall_cmds | \ - old_postinstall_cmds | old_postuninstall_cmds | \ - sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) - # Double-quote double-evaled strings. - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" - ;; - *) - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" - ;; - esac - done +: "${CONFIG_STATUS=./config.status}" +ac_write_fail=0 +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files $CONFIG_STATUS" +{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 +$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} +as_write_fail=0 +cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 +#! $SHELL +# Generated by $as_me. +# Run this file to recreate the current configuration. +# Compiler output produced by configure, useful for debugging +# configure, is in config.log if it exists. - case $lt_echo in - *'\$0 --fallback-echo"') - lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` - ;; - esac +debug=false +ac_cs_recheck=false +ac_cs_silent=false -cfgfile="$ofile" +SHELL=\${CONFIG_SHELL-$SHELL} +export SHELL +_ASEOF +cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## - cat <<__EOF__ >> "$cfgfile" -# ### BEGIN LIBTOOL TAG CONFIG: $tagname +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in #( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi -# Whether or not to build static libraries. -build_old_libs=$enable_static -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$archive_cmds_need_lc_RC +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +as_myself= +case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done +IFS=$as_save_IFS -# Whether or not to disallow shared libs when runtime libs are static -allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_RC + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done +PS1='$ ' +PS2='> ' +PS4='+ ' -# The host system. -host_alias=$host_alias -host=$host -host_os=$host_os +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE -# The build system. -build_alias=$build_alias -build=$build -build_os=$build_os +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH -# An echo program that does not interpret backslashes. -echo=$lt_echo -# The archiver. -AR=$lt_AR -AR_FLAGS=$lt_AR_FLAGS +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error -# A C compiler. -LTCC=$lt_LTCC -# A language-specific compiler. -CC=$lt_compiler_RC +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status -# Is the compiler the GNU C compiler? -with_gcc=$GCC_RC +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith -# An ERE matcher. -EGREP=$lt_EGREP -# The linker used to build libraries. -LD=$lt_LD_RC +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi -# Whether we need hard or soft links. -LN_S=$lt_LN_S +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi -# A BSD-compatible nm program. -NM=$lt_NM +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi -# A symbol stripping program -STRIP=$lt_STRIP +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` -# Used to examine libraries when file_magic_cmd begins "file" -MAGIC_CMD=$MAGIC_CMD +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits -# Used on cygwin: DLL creation program. -DLLTOOL="$DLLTOOL" +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in #((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; +esac -# Used on cygwin: object dumper. -OBJDUMP="$OBJDUMP" +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -p'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -p' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -p' + fi +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null -# Used on cygwin: assembler. -AS="$AS" -# The name of the directory that contains temporary libtool files. -objdir=$objdir +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" -# How to pass a linker flag through the compiler. -wl=$lt_lt_prog_compiler_wl_RC -# Object file suffix (normally "o"). -objext="$ac_objext" +} # as_fn_mkdir_p +if mkdir -p . 2>/dev/null; then + as_mkdir_p='mkdir -p "$as_dir"' +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi -# Old archive suffix (normally "a"). -libext="$libext" +if test -x / >/dev/null 2>&1; then + as_test_x='test -x' +else + if ls -dL / >/dev/null 2>&1; then + as_ls_L_option=L + else + as_ls_L_option= + fi + as_test_x=' + eval sh -c '\'' + if test -d "$1"; then + test -d "$1/."; + else + case $1 in #( + -*)set "./$1";; + esac; + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( + ???[sx]*):;;*)false;;esac;fi + '\'' sh + ' +fi +as_executable_p=$as_test_x -# Shared library suffix (normally ".so"). -shrext_cmds='$shrext_cmds' +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" -# Executable file suffix (normally ""). -exeext="$exeext" +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" -# Additional compiler flags for building library objects. -pic_flag=$lt_lt_prog_compiler_pic_RC -pic_mode=$pic_mode -# What is the maximum length of a command? -max_cmd_len=$lt_cv_sys_max_cmd_len +exec 6>&1 +## ----------------------------------- ## +## Main body of $CONFIG_STATUS script. ## +## ----------------------------------- ## +_ASEOF +test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_lt_cv_prog_compiler_c_o_RC +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# Save the log message, to keep $0 and so on meaningful, and to +# report actual input values of CONFIG_FILES etc. instead of their +# values after options handling. +ac_log=" +This file was extended by $as_me, which was +generated by GNU Autoconf 2.68. Invocation command line was -# Must we lock files when doing compilation? -need_locks=$lt_need_locks + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS + CONFIG_LINKS = $CONFIG_LINKS + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ -# Do we need the lib prefix for modules? -need_lib_prefix=$need_lib_prefix +on `(hostname || uname -n) 2>/dev/null | sed 1q` +" -# Do we need a version for libraries? -need_version=$need_version +_ACEOF -# Whether dlopen is supported. -dlopen_support=$enable_dlopen +case $ac_config_files in *" +"*) set x $ac_config_files; shift; ac_config_files=$*;; +esac -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_lt_prog_compiler_static_RC +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# Files that config.status was made for. +config_files="$ac_config_files" +config_commands="$ac_config_commands" -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_RC +_ACEOF -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_RC +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +ac_cs_usage="\ +\`$as_me' instantiates files and other configuration actions +from templates according to the current configuration. Unless the files +and actions are specified as TAGs, all are instantiated by default. -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_whole_archive_flag_spec_RC +Usage: $0 [OPTION]... [TAG]... -# Compiler flag to generate thread-safe objects. -thread_safe_flag_spec=$lt_thread_safe_flag_spec_RC + -h, --help print this help, then exit + -V, --version print version number and configuration settings, then exit + --config print configuration, then exit + -q, --quiet, --silent + do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE -# Library versioning type. -version_type=$version_type +Configuration files: +$config_files -# Format of library name prefix. -libname_spec=$lt_libname_spec +Configuration commands: +$config_commands -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME. -library_names_spec=$lt_library_names_spec +Report bugs to the package provider." -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" +ac_cs_version="\\ +config.status +configured by $0, generated by GNU Autoconf 2.68, + with options \\"\$ac_cs_config\\" -# Commands used to build and install an old-style archive. -RANLIB=$lt_RANLIB -old_archive_cmds=$lt_old_archive_cmds_RC -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds +Copyright (C) 2010 Free Software Foundation, Inc. +This config.status script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it." -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_RC +ac_pwd='$ac_pwd' +srcdir='$srcdir' +INSTALL='$INSTALL' +MKDIR_P='$MKDIR_P' +AWK='$AWK' +test -n "\$AWK" || AWK=awk +_ACEOF -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_RC +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# The default lists apply if the user does not specify any file. +ac_need_defaults=: +while test $# != 0 +do + case $1 in + --*=?*) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` + ac_shift=: + ;; + --*=) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg= + ac_shift=: + ;; + *) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; + esac -# Commands used to build and install a shared archive. -archive_cmds=$lt_archive_cmds_RC -archive_expsym_cmds=$lt_archive_expsym_cmds_RC -postinstall_cmds=$lt_postinstall_cmds -postuninstall_cmds=$lt_postuninstall_cmds + case $ac_option in + # Handling of the options. + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; + --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) + $as_echo "$ac_cs_version"; exit ;; + --config | --confi | --conf | --con | --co | --c ) + $as_echo "$ac_cs_config"; exit ;; + --debug | --debu | --deb | --de | --d | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + '') as_fn_error $? "missing file argument" ;; + esac + as_fn_append CONFIG_FILES " '$ac_optarg'" + ac_need_defaults=false;; + --he | --h | --help | --hel | -h ) + $as_echo "$ac_cs_usage"; exit ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; -# Commands used to build a loadable module (assumed same as above if empty) -module_cmds=$lt_module_cmds_RC -module_expsym_cmds=$lt_module_expsym_cmds_RC + # This is an error. + -*) as_fn_error $? "unrecognized option: \`$1' +Try \`$0 --help' for more information." ;; -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib + *) as_fn_append ac_config_targets " $1" + ac_need_defaults=false ;; -# Dependencies to place before the objects being linked to create a -# shared library. -predep_objects=$lt_predep_objects_RC - -# Dependencies to place after the objects being linked to create a -# shared library. -postdep_objects=$lt_postdep_objects_RC - -# Dependencies to place before the objects being linked to create a -# shared library. -predeps=$lt_predeps_RC - -# Dependencies to place after the objects being linked to create a -# shared library. -postdeps=$lt_postdeps_RC + esac + shift +done -# The library search path used internally by the compiler when linking -# a shared library. -compiler_lib_search_path=$lt_compiler_lib_search_path_RC +ac_configure_extra_args= -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method +if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" +fi -# Command to use when deplibs_check_method == file_magic. -file_magic_cmd=$lt_file_magic_cmd +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +if \$ac_cs_recheck; then + set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + shift + \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 + CONFIG_SHELL='$SHELL' + export CONFIG_SHELL + exec "\$@" +fi -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_allow_undefined_flag_RC +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX + $as_echo "$ac_log" +} >&5 -# Flag that forces no undefined symbols. -no_undefined_flag=$lt_no_undefined_flag_RC +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# +# INIT-COMMANDS +# +AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds -# Same as above, but a single script fragment to be evaled but not shown. -finish_eval=$lt_finish_eval +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe +sed_quote_subst='$sed_quote_subst' +double_quote_subst='$double_quote_subst' +delay_variable_subst='$delay_variable_subst' +macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`' +macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`' +enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`' +enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`' +pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`' +enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`' +SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`' +ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`' +PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`' +host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`' +host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`' +host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`' +build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`' +build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`' +build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`' +SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`' +Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`' +GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`' +EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`' +FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`' +LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`' +NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`' +LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`' +max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`' +ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`' +exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`' +lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`' +lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`' +lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`' +lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`' +lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`' +reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`' +reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`' +OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`' +deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`' +file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`' +file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`' +want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`' +DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`' +sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`' +AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`' +AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`' +archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`' +STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`' +RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`' +old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`' +old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`' +old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`' +lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`' +CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`' +CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`' +compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`' +GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`' +nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`' +lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`' +objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`' +MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`' +lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`' +need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`' +MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`' +DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`' +NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`' +LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`' +OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`' +OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`' +libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`' +shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`' +extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`' +archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`' +enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`' +export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`' +whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`' +compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`' +old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`' +old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`' +archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`' +archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`' +module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`' +module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`' +with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`' +allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`' +no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`' +hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`' +hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`' +hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`' +hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`' +hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`' +hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`' +hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`' +inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`' +link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`' +always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`' +export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`' +exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`' +include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`' +prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`' +postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`' +file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`' +variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`' +need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`' +need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`' +version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`' +runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`' +shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`' +shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`' +libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`' +library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`' +soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`' +install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`' +postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`' +postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`' +finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`' +finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`' +hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`' +sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`' +sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`' +hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`' +enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`' +enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`' +enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`' +old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`' +striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`' +compiler_lib_search_dirs='`$ECHO "$compiler_lib_search_dirs" | $SED "$delay_single_quote_subst"`' +predep_objects='`$ECHO "$predep_objects" | $SED "$delay_single_quote_subst"`' +postdep_objects='`$ECHO "$postdep_objects" | $SED "$delay_single_quote_subst"`' +predeps='`$ECHO "$predeps" | $SED "$delay_single_quote_subst"`' +postdeps='`$ECHO "$postdeps" | $SED "$delay_single_quote_subst"`' +compiler_lib_search_path='`$ECHO "$compiler_lib_search_path" | $SED "$delay_single_quote_subst"`' +LD_CXX='`$ECHO "$LD_CXX" | $SED "$delay_single_quote_subst"`' +reload_flag_CXX='`$ECHO "$reload_flag_CXX" | $SED "$delay_single_quote_subst"`' +reload_cmds_CXX='`$ECHO "$reload_cmds_CXX" | $SED "$delay_single_quote_subst"`' +old_archive_cmds_CXX='`$ECHO "$old_archive_cmds_CXX" | $SED "$delay_single_quote_subst"`' +compiler_CXX='`$ECHO "$compiler_CXX" | $SED "$delay_single_quote_subst"`' +GCC_CXX='`$ECHO "$GCC_CXX" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_no_builtin_flag_CXX='`$ECHO "$lt_prog_compiler_no_builtin_flag_CXX" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_pic_CXX='`$ECHO "$lt_prog_compiler_pic_CXX" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_wl_CXX='`$ECHO "$lt_prog_compiler_wl_CXX" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_static_CXX='`$ECHO "$lt_prog_compiler_static_CXX" | $SED "$delay_single_quote_subst"`' +lt_cv_prog_compiler_c_o_CXX='`$ECHO "$lt_cv_prog_compiler_c_o_CXX" | $SED "$delay_single_quote_subst"`' +archive_cmds_need_lc_CXX='`$ECHO "$archive_cmds_need_lc_CXX" | $SED "$delay_single_quote_subst"`' +enable_shared_with_static_runtimes_CXX='`$ECHO "$enable_shared_with_static_runtimes_CXX" | $SED "$delay_single_quote_subst"`' +export_dynamic_flag_spec_CXX='`$ECHO "$export_dynamic_flag_spec_CXX" | $SED "$delay_single_quote_subst"`' +whole_archive_flag_spec_CXX='`$ECHO "$whole_archive_flag_spec_CXX" | $SED "$delay_single_quote_subst"`' +compiler_needs_object_CXX='`$ECHO "$compiler_needs_object_CXX" | $SED "$delay_single_quote_subst"`' +old_archive_from_new_cmds_CXX='`$ECHO "$old_archive_from_new_cmds_CXX" | $SED "$delay_single_quote_subst"`' +old_archive_from_expsyms_cmds_CXX='`$ECHO "$old_archive_from_expsyms_cmds_CXX" | $SED "$delay_single_quote_subst"`' +archive_cmds_CXX='`$ECHO "$archive_cmds_CXX" | $SED "$delay_single_quote_subst"`' +archive_expsym_cmds_CXX='`$ECHO "$archive_expsym_cmds_CXX" | $SED "$delay_single_quote_subst"`' +module_cmds_CXX='`$ECHO "$module_cmds_CXX" | $SED "$delay_single_quote_subst"`' +module_expsym_cmds_CXX='`$ECHO "$module_expsym_cmds_CXX" | $SED "$delay_single_quote_subst"`' +with_gnu_ld_CXX='`$ECHO "$with_gnu_ld_CXX" | $SED "$delay_single_quote_subst"`' +allow_undefined_flag_CXX='`$ECHO "$allow_undefined_flag_CXX" | $SED "$delay_single_quote_subst"`' +no_undefined_flag_CXX='`$ECHO "$no_undefined_flag_CXX" | $SED "$delay_single_quote_subst"`' +hardcode_libdir_flag_spec_CXX='`$ECHO "$hardcode_libdir_flag_spec_CXX" | $SED "$delay_single_quote_subst"`' +hardcode_libdir_separator_CXX='`$ECHO "$hardcode_libdir_separator_CXX" | $SED "$delay_single_quote_subst"`' +hardcode_direct_CXX='`$ECHO "$hardcode_direct_CXX" | $SED "$delay_single_quote_subst"`' +hardcode_direct_absolute_CXX='`$ECHO "$hardcode_direct_absolute_CXX" | $SED "$delay_single_quote_subst"`' +hardcode_minus_L_CXX='`$ECHO "$hardcode_minus_L_CXX" | $SED "$delay_single_quote_subst"`' +hardcode_shlibpath_var_CXX='`$ECHO "$hardcode_shlibpath_var_CXX" | $SED "$delay_single_quote_subst"`' +hardcode_automatic_CXX='`$ECHO "$hardcode_automatic_CXX" | $SED "$delay_single_quote_subst"`' +inherit_rpath_CXX='`$ECHO "$inherit_rpath_CXX" | $SED "$delay_single_quote_subst"`' +link_all_deplibs_CXX='`$ECHO "$link_all_deplibs_CXX" | $SED "$delay_single_quote_subst"`' +always_export_symbols_CXX='`$ECHO "$always_export_symbols_CXX" | $SED "$delay_single_quote_subst"`' +export_symbols_cmds_CXX='`$ECHO "$export_symbols_cmds_CXX" | $SED "$delay_single_quote_subst"`' +exclude_expsyms_CXX='`$ECHO "$exclude_expsyms_CXX" | $SED "$delay_single_quote_subst"`' +include_expsyms_CXX='`$ECHO "$include_expsyms_CXX" | $SED "$delay_single_quote_subst"`' +prelink_cmds_CXX='`$ECHO "$prelink_cmds_CXX" | $SED "$delay_single_quote_subst"`' +postlink_cmds_CXX='`$ECHO "$postlink_cmds_CXX" | $SED "$delay_single_quote_subst"`' +file_list_spec_CXX='`$ECHO "$file_list_spec_CXX" | $SED "$delay_single_quote_subst"`' +hardcode_action_CXX='`$ECHO "$hardcode_action_CXX" | $SED "$delay_single_quote_subst"`' +compiler_lib_search_dirs_CXX='`$ECHO "$compiler_lib_search_dirs_CXX" | $SED "$delay_single_quote_subst"`' +predep_objects_CXX='`$ECHO "$predep_objects_CXX" | $SED "$delay_single_quote_subst"`' +postdep_objects_CXX='`$ECHO "$postdep_objects_CXX" | $SED "$delay_single_quote_subst"`' +predeps_CXX='`$ECHO "$predeps_CXX" | $SED "$delay_single_quote_subst"`' +postdeps_CXX='`$ECHO "$postdeps_CXX" | $SED "$delay_single_quote_subst"`' +compiler_lib_search_path_CXX='`$ECHO "$compiler_lib_search_path_CXX" | $SED "$delay_single_quote_subst"`' + +LTCC='$LTCC' +LTCFLAGS='$LTCFLAGS' +compiler='$compiler_DEFAULT' -# Transform the output of nm in a proper C declaration -global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +\$1 +_LTECHO_EOF' +} -# Transform the output of nm in a C name address pair -global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address +# Quote evaled strings. +for var in SHELL \ +ECHO \ +PATH_SEPARATOR \ +SED \ +GREP \ +EGREP \ +FGREP \ +LD \ +NM \ +LN_S \ +lt_SP2NL \ +lt_NL2SP \ +reload_flag \ +OBJDUMP \ +deplibs_check_method \ +file_magic_cmd \ +file_magic_glob \ +want_nocaseglob \ +DLLTOOL \ +sharedlib_from_linklib_cmd \ +AR \ +AR_FLAGS \ +archiver_list_spec \ +STRIP \ +RANLIB \ +CC \ +CFLAGS \ +compiler \ +lt_cv_sys_global_symbol_pipe \ +lt_cv_sys_global_symbol_to_cdecl \ +lt_cv_sys_global_symbol_to_c_name_address \ +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ +nm_file_list_spec \ +lt_prog_compiler_no_builtin_flag \ +lt_prog_compiler_pic \ +lt_prog_compiler_wl \ +lt_prog_compiler_static \ +lt_cv_prog_compiler_c_o \ +need_locks \ +MANIFEST_TOOL \ +DSYMUTIL \ +NMEDIT \ +LIPO \ +OTOOL \ +OTOOL64 \ +shrext_cmds \ +export_dynamic_flag_spec \ +whole_archive_flag_spec \ +compiler_needs_object \ +with_gnu_ld \ +allow_undefined_flag \ +no_undefined_flag \ +hardcode_libdir_flag_spec \ +hardcode_libdir_separator \ +exclude_expsyms \ +include_expsyms \ +file_list_spec \ +variables_saved_for_relink \ +libname_spec \ +library_names_spec \ +soname_spec \ +install_override_mode \ +finish_eval \ +old_striplib \ +striplib \ +compiler_lib_search_dirs \ +predep_objects \ +postdep_objects \ +predeps \ +postdeps \ +compiler_lib_search_path \ +LD_CXX \ +reload_flag_CXX \ +compiler_CXX \ +lt_prog_compiler_no_builtin_flag_CXX \ +lt_prog_compiler_pic_CXX \ +lt_prog_compiler_wl_CXX \ +lt_prog_compiler_static_CXX \ +lt_cv_prog_compiler_c_o_CXX \ +export_dynamic_flag_spec_CXX \ +whole_archive_flag_spec_CXX \ +compiler_needs_object_CXX \ +with_gnu_ld_CXX \ +allow_undefined_flag_CXX \ +no_undefined_flag_CXX \ +hardcode_libdir_flag_spec_CXX \ +hardcode_libdir_separator_CXX \ +exclude_expsyms_CXX \ +include_expsyms_CXX \ +file_list_spec_CXX \ +compiler_lib_search_dirs_CXX \ +predep_objects_CXX \ +postdep_objects_CXX \ +predeps_CXX \ +postdeps_CXX \ +compiler_lib_search_path_CXX; do + case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + *[\\\\\\\`\\"\\\$]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done -# This is the shared library runtime path variable. -runpath_var=$runpath_var +# Double-quote double-evaled strings. +for var in reload_cmds \ +old_postinstall_cmds \ +old_postuninstall_cmds \ +old_archive_cmds \ +extract_expsyms_cmds \ +old_archive_from_new_cmds \ +old_archive_from_expsyms_cmds \ +archive_cmds \ +archive_expsym_cmds \ +module_cmds \ +module_expsym_cmds \ +export_symbols_cmds \ +prelink_cmds \ +postlink_cmds \ +postinstall_cmds \ +postuninstall_cmds \ +finish_cmds \ +sys_lib_search_path_spec \ +sys_lib_dlsearch_path_spec \ +reload_cmds_CXX \ +old_archive_cmds_CXX \ +old_archive_from_new_cmds_CXX \ +old_archive_from_expsyms_cmds_CXX \ +archive_cmds_CXX \ +archive_expsym_cmds_CXX \ +module_cmds_CXX \ +module_expsym_cmds_CXX \ +export_symbols_cmds_CXX \ +prelink_cmds_CXX \ +postlink_cmds_CXX; do + case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + *[\\\\\\\`\\"\\\$]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done -# This is the shared library path variable. -shlibpath_var=$shlibpath_var +ac_aux_dir='$ac_aux_dir' +xsi_shell='$xsi_shell' +lt_shell_append='$lt_shell_append' -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath +# See if we are running on zsh, and set the options which allow our +# commands through without removal of \ escapes INIT. +if test -n "\${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST +fi -# How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action_RC -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs + PACKAGE='$PACKAGE' + VERSION='$VERSION' + TIMESTAMP='$TIMESTAMP' + RM='$RM' + ofile='$ofile' -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_RC -# If ld is used when linking, flag to hardcode \$libdir into -# a binary during linking. This must work even if \$libdir does -# not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_RC - -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator=$lt_hardcode_libdir_separator_RC - -# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the -# resulting binary. -hardcode_direct=$hardcode_direct_RC - -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L=$hardcode_minus_L_RC - -# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into -# the resulting binary. -hardcode_shlibpath_var=$hardcode_shlibpath_var_RC - -# Set to yes if building a shared library automatically hardcodes DIR into the library -# and all subsequent libraries and executables linked against it. -hardcode_automatic=$hardcode_automatic_RC -# Variables whose values should be saved in libtool wrapper scripts and -# restored at relink time. -variables_saved_for_relink="$variables_saved_for_relink" -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$link_all_deplibs_RC -# Compile-time system search path for libraries -sys_lib_search_path_spec=$lt_sys_lib_search_path_spec -# Run-time system search path for libraries -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec +_ACEOF -# Fix the shell variable \$srcfile for the compiler. -fix_srcfile_path="$fix_srcfile_path_RC" +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# Set to yes if exported symbols are required. -always_export_symbols=$always_export_symbols_RC +# Handling of arguments. +for ac_config_target in $ac_config_targets +do + case $ac_config_target in + "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; + "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; + "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; + "libcoyotl.pc") CONFIG_FILES="$CONFIG_FILES libcoyotl.pc" ;; + "libcoyotl/Makefile") CONFIG_FILES="$CONFIG_FILES libcoyotl/Makefile" ;; + "test/Makefile") CONFIG_FILES="$CONFIG_FILES test/Makefile" ;; + "docs/Makefile") CONFIG_FILES="$CONFIG_FILES docs/Makefile" ;; -# The commands to list exported symbols. -export_symbols_cmds=$lt_export_symbols_cmds_RC + *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; + esac +done -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_exclude_expsyms_RC +# If the user did not use the arguments to specify the items to instantiate, +# then the envvar interface is used. Set only those that are not. +# We use the long form for the default assignment because of an extremely +# bizarre bug on SunOS 4.1.3. +if $ac_need_defaults; then + test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files + test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands +fi -# Symbols that must always be exported. -include_expsyms=$lt_include_expsyms_RC +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason against having it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. +# Hook for its removal unless debugging. +# Note that there is a small window in which the directory will not be cleaned: +# after its creation but before its name has been assigned to `$tmp'. +$debug || +{ + tmp= ac_tmp= + trap 'exit_status=$? + : "${ac_tmp:=$tmp}" + { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status +' 0 + trap 'as_fn_exit 1' 1 2 13 15 +} +# Create a (secure) tmp directory for tmp files. -# ### END LIBTOOL TAG CONFIG: $tagname +{ + tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && + test -d "$tmp" +} || +{ + tmp=./conf$$-$RANDOM + (umask 077 && mkdir "$tmp") +} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 +ac_tmp=$tmp -__EOF__ +# Set up the scripts for CONFIG_FILES section. +# No need to generate them if there are no CONFIG_FILES. +# This happens for instance with `./config.status config.h'. +if test -n "$CONFIG_FILES"; then +ac_cr=`echo X | tr X '\015'` +# On cygwin, bash can eat \r inside `` if the user requested igncr. +# But we know of no other shell where ac_cr would be empty at this +# point, so we can use a bashism as a fallback. +if test "x$ac_cr" = x; then + eval ac_cr=\$\'\\r\' +fi +ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` +if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then + ac_cs_awk_cr='\\r' else - # If there is no Makefile yet, we rely on a make rule to execute - # `config.status --recheck' to rerun these tests and create the - # libtool script then. - ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` - if test -f "$ltmain_in"; then - test -f Makefile && make "$ltmain" - fi + ac_cs_awk_cr=$ac_cr fi +echo 'BEGIN {' >"$ac_tmp/subs1.awk" && +_ACEOF -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -CC="$lt_save_CC" +{ + echo "cat >conf$$subs.awk <<_ACEOF" && + echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && + echo "_ACEOF" +} >conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 +ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` +ac_delim='%!_!# ' +for ac_last_try in false false false false false :; do + . ./conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 - ;; + ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` + if test $ac_delim_n = $ac_delim_num; then + break + elif $ac_last_try; then + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done +rm -f conf$$subs.sh - *) - { { echo "$as_me:$LINENO: error: Unsupported tag name: $tagname" >&5 -echo "$as_me: error: Unsupported tag name: $tagname" >&2;} - { (exit 1); exit 1; }; } - ;; - esac +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && +_ACEOF +sed -n ' +h +s/^/S["/; s/!.*/"]=/ +p +g +s/^[^!]*!// +:repl +t repl +s/'"$ac_delim"'$// +t delim +:nl +h +s/\(.\{148\}\)..*/\1/ +t more1 +s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ +p +n +b repl +:more1 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t nl +:delim +h +s/\(.\{148\}\)..*/\1/ +t more2 +s/["\\]/\\&/g; s/^/"/; s/$/"/ +p +b +:more2 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t delim +' >$CONFIG_STATUS || ac_write_fail=1 +rm -f conf$$subs.awk +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +_ACAWK +cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && + for (key in S) S_is_set[key] = 1 + FS = "" - # Append the new tag name to the list of available tags. - if test -n "$tagname" ; then - available_tags="$available_tags $tagname" - fi - fi - done - IFS="$lt_save_ifs" +} +{ + line = $ 0 + nfields = split(line, field, "@") + substed = 0 + len = length(field[1]) + for (i = 2; i < nfields; i++) { + key = field[i] + keylen = length(key) + if (S_is_set[key]) { + value = S[key] + line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) + len += length(value) + length(field[++i]) + substed = 1 + } else + len += 1 + keylen + } - # Now substitute the updated list of available tags. - if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then - mv "${ofile}T" "$ofile" - chmod +x "$ofile" - else - rm -f "${ofile}T" - { { echo "$as_me:$LINENO: error: unable to update list of available tagged configurations." >&5 -echo "$as_me: error: unable to update list of available tagged configurations." >&2;} - { (exit 1); exit 1; }; } - fi -fi + print line +} +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then + sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" +else + cat +fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ + || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 +_ACEOF +# VPATH may cause trouble with some makes, so we remove sole $(srcdir), +# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ +h +s/// +s/^/:/ +s/[ ]*$/:/ +s/:\$(srcdir):/:/g +s/:\${srcdir}:/:/g +s/:@srcdir@:/:/g +s/^:*// +s/:*$// +x +s/\(=[ ]*\).*/\1/ +G +s/\n// +s/^[^=]*=[ ]*$// +}' +fi -# This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +fi # test -n "$CONFIG_FILES" -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool' -# Prevent multiple expansion +eval set X " :F $CONFIG_FILES :C $CONFIG_COMMANDS" +shift +for ac_tag +do + case $ac_tag in + :[FHLC]) ac_mode=$ac_tag; continue;; + esac + case $ac_mode$ac_tag in + :[FHL]*:*);; + :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; + :[FH]-) ac_tag=-:-;; + :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; + esac + ac_save_IFS=$IFS + IFS=: + set x $ac_tag + IFS=$ac_save_IFS + shift + ac_file=$1 + shift + case $ac_mode in + :L) ac_source=$1;; + :[FH]) + ac_file_inputs= + for ac_f + do + case $ac_f in + -) ac_f="$ac_tmp/stdin";; + *) # Look for the file first in the build tree, then in the source tree + # (if the path is not absolute). The absolute path cannot be DOS-style, + # because $ac_f cannot contain `:'. + test -f "$ac_f" || + case $ac_f in + [\\/$]*) false;; + *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; + esac || + as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; + esac + case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac + as_fn_append ac_file_inputs " '$ac_f'" + done + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + configure_input='Generated from '` + $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' + `' by configure.' + if test x"$ac_file" != x-; then + configure_input="$ac_file. $configure_input" + { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 +$as_echo "$as_me: creating $ac_file" >&6;} + fi + # Neutralize special characters interpreted by sed in replacement strings. + case $configure_input in #( + *\&* | *\|* | *\\* ) + ac_sed_conf_input=`$as_echo "$configure_input" | + sed 's/[\\\\&|]/\\\\&/g'`;; #( + *) ac_sed_conf_input=$configure_input;; + esac + case $ac_tag in + *:-:* | *:-) cat >"$ac_tmp/stdin" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; + esac + ;; + esac + ac_dir=`$as_dirname -- "$ac_file" || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + as_dir="$ac_dir"; as_fn_mkdir_p + ac_builddir=. +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + case $ac_mode in + :F) + # + # CONFIG_FILE + # + case $INSTALL in + [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; + *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; + esac + ac_MKDIR_P=$MKDIR_P + case $MKDIR_P in + [\\/$]* | ?:[\\/]* ) ;; + */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; + esac +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# If the template does not know about datarootdir, expand it. +# FIXME: This hack should be removed a few years after 2.60. +ac_datarootdir_hack=; ac_datarootdir_seen= +ac_sed_dataroot=' +/datarootdir/ { + p + q +} +/@datadir@/p +/@docdir@/p +/@infodir@/p +/@localedir@/p +/@mandir@/p' +case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in +*datarootdir*) ac_datarootdir_seen=yes;; +*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 +$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + ac_datarootdir_hack=' + s&@datadir@&$datadir&g + s&@docdir@&$docdir&g + s&@infodir@&$infodir&g + s&@localedir@&$localedir&g + s&@mandir@&$mandir&g + s&\\\${datarootdir}&$datarootdir&g' ;; +esac +_ACEOF +# Neutralize VPATH when `$srcdir' = `.'. +# Shell code in configure.ac might set extrasub. +# FIXME: do we really want to maintain this feature? +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_sed_extra="$ac_vpsub +$extrasub +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +:t +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +s|@configure_input@|$ac_sed_conf_input|;t t +s&@top_builddir@&$ac_top_builddir_sub&;t t +s&@top_build_prefix@&$ac_top_build_prefix&;t t +s&@srcdir@&$ac_srcdir&;t t +s&@abs_srcdir@&$ac_abs_srcdir&;t t +s&@top_srcdir@&$ac_top_srcdir&;t t +s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t +s&@builddir@&$ac_builddir&;t t +s&@abs_builddir@&$ac_abs_builddir&;t t +s&@abs_top_builddir@&$ac_abs_top_builddir&;t t +s&@INSTALL@&$ac_INSTALL&;t t +s&@MKDIR_P@&$ac_MKDIR_P&;t t +$ac_datarootdir_hack +" +eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ + >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + +test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && + { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ + "$ac_tmp/out"`; test -z "$ac_out"; } && + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&5 +$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&2;} + rm -f "$ac_tmp/stdin" + case $ac_file in + -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; + *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; + esac \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + ;; + :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 +$as_echo "$as_me: executing $ac_file commands" >&6;} + ;; + esac + case $ac_file$ac_mode in + "depfiles":C) test x"$AMDEP_TRUE" != x"" || { + # Autoconf 2.62 quotes --file arguments for eval, but not when files + # are listed without --file. Let's play safe and only enable the eval + # if we detect the quoting. + case $CONFIG_FILES in + *\'*) eval set x "$CONFIG_FILES" ;; + *) set x $CONFIG_FILES ;; + esac + shift + for mf + do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named `Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then + dirpart=`$as_dirname -- "$mf" || +$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$mf" : 'X\(//\)[^/]' \| \ + X"$mf" : 'X\(//\)$' \| \ + X"$mf" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$mf" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # When using ansi2knr, U may be empty or an underscore; expand it + U=`sed -n 's/^U = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`$as_dirname -- "$file" || +$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$file" : 'X\(//\)[^/]' \| \ + X"$file" : 'X\(//\)$' \| \ + X"$file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + as_dir=$dirpart/$fdir; as_fn_mkdir_p + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done + done +} + ;; + "libtool":C) + # See if we are running on zsh, and set the options which allow our + # commands through without removal of \ escapes. + if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST + fi + cfgfile="${ofile}T" + trap "$RM \"$cfgfile\"; exit 1" 1 2 15 + $RM "$cfgfile" + cat <<_LT_EOF >> "$cfgfile" +#! $SHELL -echo "$as_me:$LINENO: checking whether build environment is sane" >&5 -echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6 -# Just in case -sleep 1 -echo timestamp > conftest.file -# Do `set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` - if test "$*" = "X"; then - # -L didn't work. - set X `ls -t $srcdir/configure conftest.file` - fi - rm -f conftest.file - if test "$*" != "X $srcdir/configure conftest.file" \ - && test "$*" != "X conftest.file $srcdir/configure"; then +# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +# NOTE: Changes made to this file will be lost: look at ltmain.sh. +# +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, +# 2006, 2007, 2008, 2009, 2010, 2011 Free Software +# Foundation, Inc. +# Written by Gordon Matzigkeit, 1996 +# +# This file is part of GNU Libtool. +# +# GNU Libtool is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# As a special exception to the GNU General Public License, +# if you distribute this file as part of a program or library that +# is built using GNU Libtool, you may include this file under the +# same distribution terms that you use for the rest of that program. +# +# GNU Libtool is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Libtool; see the file COPYING. If not, a copy +# can be downloaded from http://www.gnu.org/licenses/gpl.html, or +# obtained by writing to the Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken -alias in your environment" >&5 -echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken -alias in your environment" >&2;} - { (exit 1); exit 1; }; } - fi - test "$2" = conftest.file - ) -then - # Ok. - : -else - { { echo "$as_me:$LINENO: error: newly created file is older than distributed files! -Check your system clock" >&5 -echo "$as_me: error: newly created file is older than distributed files! -Check your system clock" >&2;} - { (exit 1); exit 1; }; } -fi -echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 -ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu +# The names of the tagged configurations supported by this script. +available_tags="CXX " +# ### BEGIN LIBTOOL CONFIG -# Extract the first word of "doxygen", so it can be a program name with args. -set dummy doxygen; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_HAVE_DOXYGEN+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$HAVE_DOXYGEN"; then - ac_cv_prog_HAVE_DOXYGEN="$HAVE_DOXYGEN" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_HAVE_DOXYGEN="true" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done +# Which release of libtool.m4 was used? +macro_version=$macro_version +macro_revision=$macro_revision - test -z "$ac_cv_prog_HAVE_DOXYGEN" && ac_cv_prog_HAVE_DOXYGEN="false" -fi -fi -HAVE_DOXYGEN=$ac_cv_prog_HAVE_DOXYGEN -if test -n "$HAVE_DOXYGEN"; then - echo "$as_me:$LINENO: result: $HAVE_DOXYGEN" >&5 -echo "${ECHO_T}$HAVE_DOXYGEN" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi +# Whether or not to build shared libraries. +build_libtool_libs=$enable_shared - if test $HAVE_DOXYGEN = "false"; then - { echo "$as_me:$LINENO: WARNING: *** doxygen not found, code documentation will not be built" >&5 -echo "$as_me: WARNING: *** doxygen not found, code documentation will not be built" >&2;} - fi +# Whether or not to build static libraries. +build_old_libs=$enable_static +# What type of objects to build. +pic_mode=$pic_mode -if $HAVE_DOXYGEN; then - HAVE_DOXYGEN_TRUE= - HAVE_DOXYGEN_FALSE='#' -else - HAVE_DOXYGEN_TRUE='#' - HAVE_DOXYGEN_FALSE= -fi +# Whether or not to optimize for fast installation. +fast_install=$enable_fast_install +# Shell to use when invoking shell scripts. +SHELL=$lt_SHELL +# An echo program that protects backslashes. +ECHO=$lt_ECHO +# The PATH separator for the build system. +PATH_SEPARATOR=$lt_PATH_SEPARATOR -echo "$as_me:$LINENO: checking for ANSI C header files" >&5 -echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 -if test "${ac_cv_header_stdc+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -#include -#include -#include +# The host system. +host_alias=$host_alias +host=$host +host_os=$host_os -int -main () -{ +# The build system. +build_alias=$build_alias +build=$build +build_os=$build_os - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_header_stdc=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +# A sed program that does not truncate output. +SED=$lt_SED -ac_cv_header_stdc=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +# Sed that helps us avoid accidentally triggering echo(1) options like -n. +Xsed="\$SED -e 1s/^X//" -if test $ac_cv_header_stdc = yes; then - # SunOS 4.x string.h does not declare mem*, contrary to ANSI. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include +# A grep program that handles long lines. +GREP=$lt_GREP -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "memchr" >/dev/null 2>&1; then - : -else - ac_cv_header_stdc=no -fi -rm -f conftest* +# An ERE matcher. +EGREP=$lt_EGREP -fi +# A literal string matcher. +FGREP=$lt_FGREP -if test $ac_cv_header_stdc = yes; then - # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include +# A BSD- or MS-compatible name lister. +NM=$lt_NM -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "free" >/dev/null 2>&1; then - : -else - ac_cv_header_stdc=no -fi -rm -f conftest* +# Whether we need soft or hard links. +LN_S=$lt_LN_S -fi +# What is the maximum length of a command? +max_cmd_len=$max_cmd_len -if test $ac_cv_header_stdc = yes; then - # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. - if test "$cross_compiling" = yes; then - : -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -#if ((' ' & 0x0FF) == 0x020) -# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -#else -# define ISLOWER(c) \ - (('a' <= (c) && (c) <= 'i') \ - || ('j' <= (c) && (c) <= 'r') \ - || ('s' <= (c) && (c) <= 'z')) -# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) -#endif +# Object file suffix (normally "o"). +objext=$ac_objext -#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) -int -main () -{ - int i; - for (i = 0; i < 256; i++) - if (XOR (islower (i), ISLOWER (i)) - || toupper (i) != TOUPPER (i)) - exit(2); - exit (0); -} -_ACEOF -rm -f conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - : -else - echo "$as_me: program exited with status $ac_status" >&5 -echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +# Executable file suffix (normally ""). +exeext=$exeext -( exit $ac_status ) -ac_cv_header_stdc=no -fi -rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi -fi -fi -echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 -echo "${ECHO_T}$ac_cv_header_stdc" >&6 -if test $ac_cv_header_stdc = yes; then +# whether the shell understands "unset". +lt_unset=$lt_unset -cat >>confdefs.h <<\_ACEOF -#define STDC_HEADERS 1 -_ACEOF +# turn spaces into newlines. +SP2NL=$lt_lt_SP2NL -fi +# turn newlines into spaces. +NL2SP=$lt_lt_NL2SP -echo "$as_me:$LINENO: checking for stdbool.h that conforms to C99" >&5 -echo $ECHO_N "checking for stdbool.h that conforms to C99... $ECHO_C" >&6 -if test "${ac_cv_header_stdbool_h+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +# convert \$build file names to \$host format. +to_host_file_cmd=$lt_cv_to_host_file_cmd -#include -#ifndef bool -# error bool is not defined -#endif -#ifndef false -# error false is not defined -#endif -#if false -# error false is not 0 -#endif -#ifndef true -# error true is not defined -#endif -#if true != 1 -# error true is not 1 -#endif -#ifndef __bool_true_false_are_defined -# error __bool_true_false_are_defined is not defined -#endif +# convert \$build files to toolchain format. +to_tool_file_cmd=$lt_cv_to_tool_file_cmd - struct s { _Bool s: 1; _Bool t; } s; +# An object symbol dumper. +OBJDUMP=$lt_OBJDUMP - char a[true == 1 ? 1 : -1]; - char b[false == 0 ? 1 : -1]; - char c[__bool_true_false_are_defined == 1 ? 1 : -1]; - char d[(bool) -0.5 == true ? 1 : -1]; - bool e = &s; - char f[(_Bool) -0.0 == false ? 1 : -1]; - char g[true]; - char h[sizeof (_Bool)]; - char i[sizeof s.t]; +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=$lt_deplibs_check_method -int -main () -{ - return !a + !b + !c + !d + !e + !f + !g + !h + !i; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_header_stdbool_h=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +# Command to use when deplibs_check_method = "file_magic". +file_magic_cmd=$lt_file_magic_cmd -ac_cv_header_stdbool_h=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_header_stdbool_h" >&5 -echo "${ECHO_T}$ac_cv_header_stdbool_h" >&6 -echo "$as_me:$LINENO: checking for _Bool" >&5 -echo $ECHO_N "checking for _Bool... $ECHO_C" >&6 -if test "${ac_cv_type__Bool+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -if ((_Bool *) 0) - return 0; -if (sizeof (_Bool)) - return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_type__Bool=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +# How to find potential files when deplibs_check_method = "file_magic". +file_magic_glob=$lt_file_magic_glob -ac_cv_type__Bool=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_type__Bool" >&5 -echo "${ECHO_T}$ac_cv_type__Bool" >&6 -if test $ac_cv_type__Bool = yes; then +# Find potential files using nocaseglob when deplibs_check_method = "file_magic". +want_nocaseglob=$lt_want_nocaseglob -cat >>confdefs.h <<_ACEOF -#define HAVE__BOOL 1 -_ACEOF +# DLL creation program. +DLLTOOL=$lt_DLLTOOL +# Command to associate shared and link libraries. +sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd -fi +# The archiver. +AR=$lt_AR -if test $ac_cv_header_stdbool_h = yes; then +# Flags to create an archive. +AR_FLAGS=$lt_AR_FLAGS -cat >>confdefs.h <<\_ACEOF -#define HAVE_STDBOOL_H 1 -_ACEOF +# How to feed a file listing to the archiver. +archiver_list_spec=$lt_archiver_list_spec -fi +# A symbol stripping program. +STRIP=$lt_STRIP +# Commands used to install an old-style archive. +RANLIB=$lt_RANLIB +old_postinstall_cmds=$lt_old_postinstall_cmds +old_postuninstall_cmds=$lt_old_postuninstall_cmds +# Whether to use a lock for old archive extraction. +lock_old_archive_extraction=$lock_old_archive_extraction +# A C compiler. +LTCC=$lt_CC -for ac_header in stdint.h unistd.h fcntl.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -else - # Is the header compilable? -echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +# LTCC compiler flags. +LTCFLAGS=$lt_CFLAGS -ac_header_compiler=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe -# Is the header present? -echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_cxx_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - ac_header_preproc=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +# Transform the output of nm in a proper C declaration. +global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl - ac_header_preproc=no -fi -rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 +# Transform the output of nm in a C name address pair. +global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_cxx_preproc_warn_flag in - yes:no: ) - { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - ( - cat <<\_ASBOX -## ------------------------------------------ ## -## Report this to the AC_PACKAGE_NAME lists. ## -## ------------------------------------------ ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - eval "$as_ac_Header=\$ac_header_preproc" -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +# Transform the output of nm in a C name address pair when lib prefix is needed. +global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix -fi -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF +# Specify filename containing input files for \$NM. +nm_file_list_spec=$lt_nm_file_list_spec -fi +# The root where to search for dependent libraries,and in which our libraries should be installed. +lt_sysroot=$lt_sysroot -done +# The name of the directory that contains temporary libtool files. +objdir=$objdir +# Used to examine libraries when file_magic_cmd begins with "file". +MAGIC_CMD=$MAGIC_CMD +# Must we lock files when doing compilation? +need_locks=$lt_need_locks +# Manifest tool. +MANIFEST_TOOL=$lt_MANIFEST_TOOL -echo "$as_me:$LINENO: checking for png_read_info in -lpng" >&5 -echo $ECHO_N "checking for png_read_info in -lpng... $ECHO_C" >&6 -if test "${ac_cv_lib_png_png_read_info+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lpng $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +# Tool to manipulate archived DWARF debug symbol files on Mac OS X. +DSYMUTIL=$lt_DSYMUTIL -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char png_read_info (); -int -main () -{ -png_read_info (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_png_png_read_info=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +# Tool to change global to local symbols on Mac OS X. +NMEDIT=$lt_NMEDIT -ac_cv_lib_png_png_read_info=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_png_png_read_info" >&5 -echo "${ECHO_T}$ac_cv_lib_png_png_read_info" >&6 -if test $ac_cv_lib_png_png_read_info = yes; then - cat >>confdefs.h <<_ACEOF -#define HAVE_LIBPNG 1 -_ACEOF +# Tool to manipulate fat objects and archives on Mac OS X. +LIPO=$lt_LIPO - LIBS="-lpng $LIBS" +# ldd/readelf like tool for Mach-O binaries on Mac OS X. +OTOOL=$lt_OTOOL -fi +# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4. +OTOOL64=$lt_OTOOL64 -if test "${ac_cv_header_png_h+set}" = set; then - echo "$as_me:$LINENO: checking for png.h" >&5 -echo $ECHO_N "checking for png.h... $ECHO_C" >&6 -if test "${ac_cv_header_png_h+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -echo "$as_me:$LINENO: result: $ac_cv_header_png_h" >&5 -echo "${ECHO_T}$ac_cv_header_png_h" >&6 -else - # Is the header compilable? -echo "$as_me:$LINENO: checking png.h usability" >&5 -echo $ECHO_N "checking png.h usability... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +# Old archive suffix (normally "a"). +libext=$libext -ac_header_compiler=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 +# Shared library suffix (normally ".so"). +shrext_cmds=$lt_shrext_cmds -# Is the header present? -echo "$as_me:$LINENO: checking png.h presence" >&5 -echo $ECHO_N "checking png.h presence... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_cxx_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - ac_header_preproc=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +# The commands to extract the exported symbol list from a shared archive. +extract_expsyms_cmds=$lt_extract_expsyms_cmds - ac_header_preproc=no -fi -rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 +# Variables whose values should be saved in libtool wrapper scripts and +# restored at link time. +variables_saved_for_relink=$lt_variables_saved_for_relink -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_cxx_preproc_warn_flag in - yes:no: ) - { echo "$as_me:$LINENO: WARNING: png.h: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: png.h: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: png.h: proceeding with the compiler's result" >&5 -echo "$as_me: WARNING: png.h: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { echo "$as_me:$LINENO: WARNING: png.h: present but cannot be compiled" >&5 -echo "$as_me: WARNING: png.h: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: png.h: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: png.h: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: png.h: see the Autoconf documentation" >&5 -echo "$as_me: WARNING: png.h: see the Autoconf documentation" >&2;} - { echo "$as_me:$LINENO: WARNING: png.h: section \"Present But Cannot Be Compiled\"" >&5 -echo "$as_me: WARNING: png.h: section \"Present But Cannot Be Compiled\"" >&2;} - { echo "$as_me:$LINENO: WARNING: png.h: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: png.h: proceeding with the preprocessor's result" >&2;} - { echo "$as_me:$LINENO: WARNING: png.h: in the future, the compiler will take precedence" >&5 -echo "$as_me: WARNING: png.h: in the future, the compiler will take precedence" >&2;} - ( - cat <<\_ASBOX -## ------------------------------------------ ## -## Report this to the AC_PACKAGE_NAME lists. ## -## ------------------------------------------ ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac -echo "$as_me:$LINENO: checking for png.h" >&5 -echo $ECHO_N "checking for png.h... $ECHO_C" >&6 -if test "${ac_cv_header_png_h+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_cv_header_png_h=$ac_header_preproc -fi -echo "$as_me:$LINENO: result: $ac_cv_header_png_h" >&5 -echo "${ECHO_T}$ac_cv_header_png_h" >&6 +# Do we need the "lib" prefix for modules? +need_lib_prefix=$need_lib_prefix -fi +# Do we need a version for libraries? +need_version=$need_version +# Library versioning type. +version_type=$version_type +# Shared library runtime path variable. +runpath_var=$runpath_var +# Shared library path variable. +shlibpath_var=$shlibpath_var -echo "$as_me:$LINENO: checking for clock_gettime in -lrt" >&5 -echo $ECHO_N "checking for clock_gettime in -lrt... $ECHO_C" >&6 -if test "${ac_cv_lib_rt_clock_gettime+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lrt $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=$shlibpath_overrides_runpath -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char clock_gettime (); -int -main () -{ -clock_gettime (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_rt_clock_gettime=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +# Format of library name prefix. +libname_spec=$lt_libname_spec -ac_cv_lib_rt_clock_gettime=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_rt_clock_gettime" >&5 -echo "${ECHO_T}$ac_cv_lib_rt_clock_gettime" >&6 -if test $ac_cv_lib_rt_clock_gettime = yes; then - cat >>confdefs.h <<_ACEOF -#define HAVE_LIBRT 1 -_ACEOF +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME +library_names_spec=$lt_library_names_spec - LIBS="-lrt $LIBS" +# The coded name of the library, if different from the real name. +soname_spec=$lt_soname_spec -fi +# Permission mode override for installation of shared libraries. +install_override_mode=$lt_install_override_mode +# Command to use after installation of a shared archive. +postinstall_cmds=$lt_postinstall_cmds +# Command to use after uninstallation of a shared archive. +postuninstall_cmds=$lt_postuninstall_cmds - ac_config_files="$ac_config_files Makefile libcoyotl.pc libcoyotl/Makefile test/Makefile docs/Makefile" -cat >confcache <<\_ACEOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs, see configure's option --config-cache. -# It is not useful on other systems. If it contains results you don't -# want to keep, you may remove or edit it. -# -# config.status only pays attention to the cache file if you give it -# the --recheck option to rerun configure. -# -# `ac_cv_env_foo' variables (set or unset) will be overridden when -# loading this file, other *unset* `ac_cv_foo' will be assigned the -# following values. +# Commands used to finish a libtool library installation in a directory. +finish_cmds=$lt_finish_cmds -_ACEOF +# As "finish_cmds", except a single script fragment to be evaled but +# not shown. +finish_eval=$lt_finish_eval + +# Whether we should hardcode library paths into libraries. +hardcode_into_libs=$hardcode_into_libs + +# Compile-time system search path for libraries. +sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +# Run-time system search path for libraries. +sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +# Whether dlopen is supported. +dlopen_support=$enable_dlopen + +# Whether dlopen of programs is supported. +dlopen_self=$enable_dlopen_self + +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=$enable_dlopen_self_static + +# Commands to strip libraries. +old_striplib=$lt_old_striplib +striplib=$lt_striplib -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, don't put newlines in cache variables' values. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -{ - (set) 2>&1 | - case `(ac_space=' '; set | grep ac_space) 2>&1` in - *ac_space=\ *) - # `set' does not quote correctly, so add quotes (double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \). - sed -n \ - "s/'/'\\\\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" - ;; - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n \ - "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" - ;; - esac; -} | - sed ' - t clear - : clear - s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ - t end - /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ - : end' >>confcache -if diff $cache_file confcache >/dev/null 2>&1; then :; else - if test -w $cache_file; then - test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" - cat confcache >$cache_file - else - echo "not updating unwritable cache $cache_file" - fi -fi -rm -f confcache -test "x$prefix" = xNONE && prefix=$ac_default_prefix -# Let make expand exec_prefix. -test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' +# The linker used to build libraries. +LD=$lt_LD -# VPATH may cause trouble with some makes, so we remove $(srcdir), -# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and -# trailing colons and then remove the whole line if VPATH becomes empty -# (actually we leave an empty line to preserve line numbers). -if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=/{ -s/:*\$(srcdir):*/:/; -s/:*\${srcdir}:*/:/; -s/:*@srcdir@:*/:/; -s/^\([^=]*=[ ]*\):*/\1/; -s/:*$//; -s/^[^=]*=[ ]*$//; -}' -fi +# How to create reloadable object files. +reload_flag=$lt_reload_flag +reload_cmds=$lt_reload_cmds -# Transform confdefs.h into DEFS. -# Protect against shell expansion while executing Makefile rules. -# Protect against Makefile macro expansion. -# -# If the first sed substitution is executed (which looks for macros that -# take arguments), then we branch to the quote section. Otherwise, -# look for a macro that doesn't take arguments. -cat >confdef2opt.sed <<\_ACEOF -t clear -: clear -s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g -t quote -s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g -t quote -d -: quote -s,[ `~#$^&*(){}\\|;'"<>?],\\&,g -s,\[,\\&,g -s,\],\\&,g -s,\$,$$,g -p -_ACEOF -# We use echo to avoid assuming a particular line-breaking character. -# The extra dot is to prevent the shell from consuming trailing -# line-breaks from the sub-command output. A line-break within -# single-quotes doesn't work because, if this script is created in a -# platform that uses two characters for line-breaks (e.g., DOS), tr -# would break. -ac_LF_and_DOT=`echo; echo .` -DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'` -rm -f confdef2opt.sed +# Commands used to build an old-style archive. +old_archive_cmds=$lt_old_archive_cmds +# A language specific compiler. +CC=$lt_compiler -ac_libobjs= -ac_ltlibobjs= -for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue - # 1. Remove the extension, and $U if already installed. - ac_i=`echo "$ac_i" | - sed 's/\$U\././;s/\.o$//;s/\.obj$//'` - # 2. Add them. - ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" - ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' -done -LIBOBJS=$ac_libobjs +# Is the compiler the GNU compiler? +with_gcc=$GCC -LTLIBOBJS=$ac_ltlibobjs +# Compiler flag to turn off builtin functions. +no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag +# Additional compiler flags for building library objects. +pic_flag=$lt_lt_prog_compiler_pic -if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then - { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -echo "$as_me: error: conditional \"AMDEP\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi -if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then - { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi -if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then - { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCXX\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -echo "$as_me: error: conditional \"am__fastdepCXX\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi -if test -z "${HAVE_DOXYGEN_TRUE}" && test -z "${HAVE_DOXYGEN_FALSE}"; then - { { echo "$as_me:$LINENO: error: conditional \"HAVE_DOXYGEN\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -echo "$as_me: error: conditional \"HAVE_DOXYGEN\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi +# How to pass a linker flag through the compiler. +wl=$lt_lt_prog_compiler_wl -: ${CONFIG_STATUS=./config.status} -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files $CONFIG_STATUS" -{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 -echo "$as_me: creating $CONFIG_STATUS" >&6;} -cat >$CONFIG_STATUS <<_ACEOF -#! $SHELL -# Generated by $as_me. -# Run this file to recreate the current configuration. -# Compiler output produced by configure, useful for debugging -# configure, is in config.log if it exists. +# Compiler flag to prevent dynamic linking. +link_static_flag=$lt_lt_prog_compiler_static -debug=false -ac_cs_recheck=false -ac_cs_silent=false -SHELL=\${CONFIG_SHELL-$SHELL} -_ACEOF +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_lt_cv_prog_compiler_c_o -cat >>$CONFIG_STATUS <<\_ACEOF -## --------------------- ## -## M4sh Initialization. ## -## --------------------- ## +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=$archive_cmds_need_lc -# Be Bourne compatible -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' -elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then - set -o posix -fi -DUALCASE=1; export DUALCASE # for MKS sh +# Whether or not to disallow shared libs when runtime libs are static. +allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes -# Support unset when possible. -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - as_unset=unset -else - as_unset=false -fi +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$lt_export_dynamic_flag_spec +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$lt_whole_archive_flag_spec -# Work around bugs in pre-3.0 UWIN ksh. -$as_unset ENV MAIL MAILPATH -PS1='$ ' -PS2='> ' -PS4='+ ' +# Whether the compiler copes with passing no objects directly. +compiler_needs_object=$lt_compiler_needs_object -# NLS nuisances. -for as_var in \ - LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ - LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ - LC_TELEPHONE LC_TIME -do - if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then - eval $as_var=C; export $as_var - else - $as_unset $as_var - fi -done +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_old_archive_from_new_cmds -# Required to use basename. -if expr a : '\(a\)' >/dev/null 2>&1; then - as_expr=expr -else - as_expr=false -fi +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds -if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi +# Commands used to build a shared archive. +archive_cmds=$lt_archive_cmds +archive_expsym_cmds=$lt_archive_expsym_cmds +# Commands used to build a loadable module if different from building +# a shared archive. +module_cmds=$lt_module_cmds +module_expsym_cmds=$lt_module_expsym_cmds -# Name of the executable. -as_me=`$as_basename "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)$' \| \ - . : '\(.\)' 2>/dev/null || -echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } - /^X\/\(\/\/\)$/{ s//\1/; q; } - /^X\/\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` +# Whether we are building with GNU ld or not. +with_gnu_ld=$lt_with_gnu_ld +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_allow_undefined_flag -# PATH needs CR, and LINENO needs CR and PATH. -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits +# Flag that enforces no undefined symbols. +no_undefined_flag=$lt_no_undefined_flag -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conf$$.sh -fi +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist +hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec +# Whether we need a single "-rpath" flag with a separated argument. +hardcode_libdir_separator=$lt_hardcode_libdir_separator - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" || { - # Find who we are. Look in the path if we contain no path at all - # relative or not. - case $0 in - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -done +# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes +# DIR into the resulting binary. +hardcode_direct=$hardcode_direct - ;; - esac - # We did not find ourselves, most probably we were run as `sh COMMAND' - # in which case we are not to be found in the path. - if test "x$as_myself" = x; then - as_myself=$0 - fi - if test ! -f "$as_myself"; then - { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 -echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} - { (exit 1); exit 1; }; } - fi - case $CONFIG_SHELL in - '') - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for as_base in sh bash ksh sh5; do - case $as_dir in - /*) - if ("$as_dir/$as_base" -c ' - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then - $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } - $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } - CONFIG_SHELL=$as_dir/$as_base - export CONFIG_SHELL - exec "$CONFIG_SHELL" "$0" ${1+"$@"} - fi;; - esac - done -done -;; - esac +# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes +# DIR into the resulting binary and the resulting library dependency is +# "absolute",i.e impossible to change by setting \${shlibpath_var} if the +# library is relocated. +hardcode_direct_absolute=$hardcode_direct_absolute - # Create $as_me.lineno as a copy of $as_myself, but with $LINENO - # uniformly replaced by the line number. The first 'sed' inserts a - # line-number line before each line; the second 'sed' does the real - # work. The second script uses 'N' to pair each line-number line - # with the numbered line, and appends trailing '-' during - # substitution so that $LINENO is not a special case at line end. - # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the - # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) - sed '=' <$as_myself | - sed ' - N - s,$,-, - : loop - s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, - t loop - s,-$,, - s,^['$as_cr_digits']*\n,, - ' >$as_me.lineno && - chmod +x $as_me.lineno || - { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 -echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} - { (exit 1); exit 1; }; } +# Set to "yes" if using the -LDIR flag during linking hardcodes DIR +# into the resulting binary. +hardcode_minus_L=$hardcode_minus_L - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensible to this). - . ./$as_me.lineno - # Exit status is that of the last command. - exit -} +# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR +# into the resulting binary. +hardcode_shlibpath_var=$hardcode_shlibpath_var +# Set to "yes" if building a shared library automatically hardcodes DIR +# into the library and all subsequent libraries and executables linked +# against it. +hardcode_automatic=$hardcode_automatic -case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in - *c*,-n*) ECHO_N= ECHO_C=' -' ECHO_T=' ' ;; - *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; - *) ECHO_N= ECHO_C='\c' ECHO_T= ;; -esac +# Set to yes if linker adds runtime paths of dependent libraries +# to runtime path list. +inherit_rpath=$inherit_rpath -if expr a : '\(a\)' >/dev/null 2>&1; then - as_expr=expr -else - as_expr=false -fi +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$link_all_deplibs -rm -f conf$$ conf$$.exe conf$$.file -echo >conf$$.file -if ln -s conf$$.file conf$$ 2>/dev/null; then - # We could just check for DJGPP; but this test a) works b) is more generic - # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). - if test -f conf$$.exe; then - # Don't use ln at all; we don't have any links - as_ln_s='cp -p' - else - as_ln_s='ln -s' - fi -elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln -else - as_ln_s='cp -p' -fi -rm -f conf$$ conf$$.exe conf$$.file +# Set to "yes" if exported symbols are required. +always_export_symbols=$always_export_symbols -if mkdir -p . 2>/dev/null; then - as_mkdir_p=: -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi +# The commands to list exported symbols. +export_symbols_cmds=$lt_export_symbols_cmds -as_executable_p="test -f" +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_exclude_expsyms -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" +# Symbols that must always be exported. +include_expsyms=$lt_include_expsyms -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" +# Commands necessary for linking programs (against libraries) with templates. +prelink_cmds=$lt_prelink_cmds +# Commands necessary for finishing linking programs. +postlink_cmds=$lt_postlink_cmds -# IFS -# We need space, tab and new line, in precisely that order. -as_nl=' -' -IFS=" $as_nl" +# Specify filename containing input files. +file_list_spec=$lt_file_list_spec -# CDPATH. -$as_unset CDPATH +# How to hardcode a shared library path into an executable. +hardcode_action=$hardcode_action -exec 6>&1 +# The directories searched by this compiler when creating a shared library. +compiler_lib_search_dirs=$lt_compiler_lib_search_dirs -# Open the log real soon, to keep \$[0] and so on meaningful, and to -# report actual input values of CONFIG_FILES etc. instead of their -# values after options handling. Logging --version etc. is OK. -exec 5>>config.log -{ - echo - sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX -## Running $as_me. ## -_ASBOX -} >&5 -cat >&5 <<_CSEOF +# Dependencies to place before and after the objects being linked to +# create a shared library. +predep_objects=$lt_predep_objects +postdep_objects=$lt_postdep_objects +predeps=$lt_predeps +postdeps=$lt_postdeps -This file was extended by $as_me, which was -generated by GNU Autoconf 2.59. Invocation command line was +# The library search path used internally by the compiler when linking +# a shared library. +compiler_lib_search_path=$lt_compiler_lib_search_path - CONFIG_FILES = $CONFIG_FILES - CONFIG_HEADERS = $CONFIG_HEADERS - CONFIG_LINKS = $CONFIG_LINKS - CONFIG_COMMANDS = $CONFIG_COMMANDS - $ $0 $@ +# ### END LIBTOOL CONFIG -_CSEOF -echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 -echo >&5 -_ACEOF +_LT_EOF -# Files that config.status was made for. -if test -n "$ac_config_files"; then - echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS + case $host_os in + aix3*) + cat <<\_LT_EOF >> "$cfgfile" +# AIX sometimes has problems with the GCC collect2 program. For some +# reason, if we set the COLLECT_NAMES environment variable, the problems +# vanish in a puff of smoke. +if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES fi +_LT_EOF + ;; + esac -if test -n "$ac_config_headers"; then - echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS -fi -if test -n "$ac_config_links"; then - echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS -fi +ltmain="$ac_aux_dir/ltmain.sh" + + + # We use sed instead of cat because bash on DJGPP gets confused if + # if finds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? + sed '$q' "$ltmain" >> "$cfgfile" \ + || (rm -f "$cfgfile"; exit 1) -if test -n "$ac_config_commands"; then - echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS + if test x"$xsi_shell" = xyes; then + sed -e '/^func_dirname ()$/,/^} # func_dirname /c\ +func_dirname ()\ +{\ +\ case ${1} in\ +\ */*) func_dirname_result="${1%/*}${2}" ;;\ +\ * ) func_dirname_result="${3}" ;;\ +\ esac\ +} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_basename ()$/,/^} # func_basename /c\ +func_basename ()\ +{\ +\ func_basename_result="${1##*/}"\ +} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\ +func_dirname_and_basename ()\ +{\ +\ case ${1} in\ +\ */*) func_dirname_result="${1%/*}${2}" ;;\ +\ * ) func_dirname_result="${3}" ;;\ +\ esac\ +\ func_basename_result="${1##*/}"\ +} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_stripname ()$/,/^} # func_stripname /c\ +func_stripname ()\ +{\ +\ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\ +\ # positional parameters, so assign one to ordinary parameter first.\ +\ func_stripname_result=${3}\ +\ func_stripname_result=${func_stripname_result#"${1}"}\ +\ func_stripname_result=${func_stripname_result%"${2}"}\ +} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\ +func_split_long_opt ()\ +{\ +\ func_split_long_opt_name=${1%%=*}\ +\ func_split_long_opt_arg=${1#*=}\ +} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\ +func_split_short_opt ()\ +{\ +\ func_split_short_opt_arg=${1#??}\ +\ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\ +} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\ +func_lo2o ()\ +{\ +\ case ${1} in\ +\ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\ +\ *) func_lo2o_result=${1} ;;\ +\ esac\ +} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_xform ()$/,/^} # func_xform /c\ +func_xform ()\ +{\ + func_xform_result=${1%.*}.lo\ +} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_arith ()$/,/^} # func_arith /c\ +func_arith ()\ +{\ + func_arith_result=$(( $* ))\ +} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_len ()$/,/^} # func_len /c\ +func_len ()\ +{\ + func_len_result=${#1}\ +} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + +fi + +if test x"$lt_shell_append" = xyes; then + sed -e '/^func_append ()$/,/^} # func_append /c\ +func_append ()\ +{\ + eval "${1}+=\\${2}"\ +} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\ +func_append_quoted ()\ +{\ +\ func_quote_for_eval "${2}"\ +\ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\ +} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + # Save a `func_append' function call where possible by direct use of '+=' + sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") + test 0 -eq $? || _lt_function_replace_fail=: +else + # Save a `func_append' function call even when '+=' is not available + sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") + test 0 -eq $? || _lt_function_replace_fail=: +fi + +if test x"$_lt_function_replace_fail" = x":"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5 +$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;} fi -cat >>$CONFIG_STATUS <<\_ACEOF - -ac_cs_usage="\ -\`$as_me' instantiates files from templates according to the -current configuration. - -Usage: $0 [OPTIONS] [FILE]... - -h, --help print this help, then exit - -V, --version print version number, then exit - -q, --quiet do not print progress messages - -d, --debug don't remove temporary files - --recheck update $as_me by reconfiguring in the same conditions - --file=FILE[:TEMPLATE] - instantiate the configuration file FILE + mv -f "$cfgfile" "$ofile" || + (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") + chmod +x "$ofile" -Configuration files: -$config_files -Configuration commands: -$config_commands + cat <<_LT_EOF >> "$ofile" -Report bugs to ." -_ACEOF +# ### BEGIN LIBTOOL TAG CONFIG: CXX -cat >>$CONFIG_STATUS <<_ACEOF -ac_cs_version="\\ -config.status -configured by $0, generated by GNU Autoconf 2.59, - with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" +# The linker used to build libraries. +LD=$lt_LD_CXX -Copyright (C) 2003 Free Software Foundation, Inc. -This config.status script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it." -srcdir=$srcdir -INSTALL="$INSTALL" -_ACEOF +# How to create reloadable object files. +reload_flag=$lt_reload_flag_CXX +reload_cmds=$lt_reload_cmds_CXX -cat >>$CONFIG_STATUS <<\_ACEOF -# If no file are specified by the user, then we need to provide default -# value. By we need to know if files were specified by the user. -ac_need_defaults=: -while test $# != 0 -do - case $1 in - --*=*) - ac_option=`expr "x$1" : 'x\([^=]*\)='` - ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` - ac_shift=: - ;; - -*) - ac_option=$1 - ac_optarg=$2 - ac_shift=shift - ;; - *) # This is not an option, so the user has probably given explicit - # arguments. - ac_option=$1 - ac_need_defaults=false;; - esac +# Commands used to build an old-style archive. +old_archive_cmds=$lt_old_archive_cmds_CXX - case $ac_option in - # Handling of the options. -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - ac_cs_recheck=: ;; - --version | --vers* | -V ) - echo "$ac_cs_version"; exit 0 ;; - --he | --h) - # Conflict between --help and --header - { { echo "$as_me:$LINENO: error: ambiguous option: $1 -Try \`$0 --help' for more information." >&5 -echo "$as_me: error: ambiguous option: $1 -Try \`$0 --help' for more information." >&2;} - { (exit 1); exit 1; }; };; - --help | --hel | -h ) - echo "$ac_cs_usage"; exit 0 ;; - --debug | --d* | -d ) - debug=: ;; - --file | --fil | --fi | --f ) - $ac_shift - CONFIG_FILES="$CONFIG_FILES $ac_optarg" - ac_need_defaults=false;; - --header | --heade | --head | --hea ) - $ac_shift - CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" - ac_need_defaults=false;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil | --si | --s) - ac_cs_silent=: ;; +# A language specific compiler. +CC=$lt_compiler_CXX - # This is an error. - -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 -Try \`$0 --help' for more information." >&5 -echo "$as_me: error: unrecognized option: $1 -Try \`$0 --help' for more information." >&2;} - { (exit 1); exit 1; }; } ;; +# Is the compiler the GNU compiler? +with_gcc=$GCC_CXX - *) ac_config_targets="$ac_config_targets $1" ;; +# Compiler flag to turn off builtin functions. +no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX - esac - shift -done +# Additional compiler flags for building library objects. +pic_flag=$lt_lt_prog_compiler_pic_CXX -ac_configure_extra_args= +# How to pass a linker flag through the compiler. +wl=$lt_lt_prog_compiler_wl_CXX -if $ac_cs_silent; then - exec 6>/dev/null - ac_configure_extra_args="$ac_configure_extra_args --silent" -fi +# Compiler flag to prevent dynamic linking. +link_static_flag=$lt_lt_prog_compiler_static_CXX -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF -if \$ac_cs_recheck; then - echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 - exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion -fi +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX -_ACEOF +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=$archive_cmds_need_lc_CXX -cat >>$CONFIG_STATUS <<_ACEOF -# -# INIT-COMMANDS section. -# +# Whether or not to disallow shared libs when runtime libs are static. +allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX -AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX -_ACEOF +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX +# Whether the compiler copes with passing no objects directly. +compiler_needs_object=$lt_compiler_needs_object_CXX +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX -cat >>$CONFIG_STATUS <<\_ACEOF -for ac_config_target in $ac_config_targets -do - case "$ac_config_target" in - # Handling of arguments. - "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; - "libcoyotl.pc" ) CONFIG_FILES="$CONFIG_FILES libcoyotl.pc" ;; - "libcoyotl/Makefile" ) CONFIG_FILES="$CONFIG_FILES libcoyotl/Makefile" ;; - "test/Makefile" ) CONFIG_FILES="$CONFIG_FILES test/Makefile" ;; - "docs/Makefile" ) CONFIG_FILES="$CONFIG_FILES docs/Makefile" ;; - "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; - *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 -echo "$as_me: error: invalid argument: $ac_config_target" >&2;} - { (exit 1); exit 1; }; };; - esac -done +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX -# If the user did not use the arguments to specify the items to instantiate, -# then the envvar interface is used. Set only those that are not. -# We use the long form for the default assignment because of an extremely -# bizarre bug on SunOS 4.1.3. -if $ac_need_defaults; then - test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files - test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands -fi +# Commands used to build a shared archive. +archive_cmds=$lt_archive_cmds_CXX +archive_expsym_cmds=$lt_archive_expsym_cmds_CXX -# Have a temporary directory for convenience. Make it in the build tree -# simply because there is no reason to put it here, and in addition, -# creating and moving files from /tmp can sometimes cause problems. -# Create a temporary directory, and hook for its removal unless debugging. -$debug || -{ - trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 - trap '{ (exit 1); exit 1; }' 1 2 13 15 -} +# Commands used to build a loadable module if different from building +# a shared archive. +module_cmds=$lt_module_cmds_CXX +module_expsym_cmds=$lt_module_expsym_cmds_CXX -# Create a (secure) tmp directory for tmp files. +# Whether we are building with GNU ld or not. +with_gnu_ld=$lt_with_gnu_ld_CXX -{ - tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && - test -n "$tmp" && test -d "$tmp" -} || -{ - tmp=./confstat$$-$RANDOM - (umask 077 && mkdir $tmp) -} || -{ - echo "$me: cannot create a temporary directory in ." >&2 - { (exit 1); exit 1; } -} +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_allow_undefined_flag_CXX -_ACEOF +# Flag that enforces no undefined symbols. +no_undefined_flag=$lt_no_undefined_flag_CXX -cat >>$CONFIG_STATUS <<_ACEOF +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist +hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX -# -# CONFIG_FILES section. -# +# Whether we need a single "-rpath" flag with a separated argument. +hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX -# No need to generate the scripts if there are no CONFIG_FILES. -# This happens for instance when ./config.status config.h -if test -n "\$CONFIG_FILES"; then - # Protect against being on the right side of a sed subst in config.status. - sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; - s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF -s,@SHELL@,$SHELL,;t t -s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t -s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t -s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t -s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t -s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t -s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t -s,@exec_prefix@,$exec_prefix,;t t -s,@prefix@,$prefix,;t t -s,@program_transform_name@,$program_transform_name,;t t -s,@bindir@,$bindir,;t t -s,@sbindir@,$sbindir,;t t -s,@libexecdir@,$libexecdir,;t t -s,@datadir@,$datadir,;t t -s,@sysconfdir@,$sysconfdir,;t t -s,@sharedstatedir@,$sharedstatedir,;t t -s,@localstatedir@,$localstatedir,;t t -s,@libdir@,$libdir,;t t -s,@includedir@,$includedir,;t t -s,@oldincludedir@,$oldincludedir,;t t -s,@infodir@,$infodir,;t t -s,@mandir@,$mandir,;t t -s,@build_alias@,$build_alias,;t t -s,@host_alias@,$host_alias,;t t -s,@target_alias@,$target_alias,;t t -s,@DEFS@,$DEFS,;t t -s,@ECHO_C@,$ECHO_C,;t t -s,@ECHO_N@,$ECHO_N,;t t -s,@ECHO_T@,$ECHO_T,;t t -s,@LIBS@,$LIBS,;t t -s,@GENERIC_LIBRARY_VERSION@,$GENERIC_LIBRARY_VERSION,;t t -s,@GENERIC_LIBRARY_NAME@,$GENERIC_LIBRARY_NAME,;t t -s,@GENERIC_RELEASE@,$GENERIC_RELEASE,;t t -s,@GENERIC_VERSION@,$GENERIC_VERSION,;t t -s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t -s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t -s,@INSTALL_DATA@,$INSTALL_DATA,;t t -s,@CYGPATH_W@,$CYGPATH_W,;t t -s,@PACKAGE@,$PACKAGE,;t t -s,@VERSION@,$VERSION,;t t -s,@ACLOCAL@,$ACLOCAL,;t t -s,@AUTOCONF@,$AUTOCONF,;t t -s,@AUTOMAKE@,$AUTOMAKE,;t t -s,@AUTOHEADER@,$AUTOHEADER,;t t -s,@MAKEINFO@,$MAKEINFO,;t t -s,@install_sh@,$install_sh,;t t -s,@STRIP@,$STRIP,;t t -s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t -s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t -s,@mkdir_p@,$mkdir_p,;t t -s,@AWK@,$AWK,;t t -s,@SET_MAKE@,$SET_MAKE,;t t -s,@am__leading_dot@,$am__leading_dot,;t t -s,@AMTAR@,$AMTAR,;t t -s,@am__tar@,$am__tar,;t t -s,@am__untar@,$am__untar,;t t -s,@CC@,$CC,;t t -s,@CFLAGS@,$CFLAGS,;t t -s,@LDFLAGS@,$LDFLAGS,;t t -s,@CPPFLAGS@,$CPPFLAGS,;t t -s,@ac_ct_CC@,$ac_ct_CC,;t t -s,@EXEEXT@,$EXEEXT,;t t -s,@OBJEXT@,$OBJEXT,;t t -s,@DEPDIR@,$DEPDIR,;t t -s,@am__include@,$am__include,;t t -s,@am__quote@,$am__quote,;t t -s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t -s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t -s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t -s,@CCDEPMODE@,$CCDEPMODE,;t t -s,@am__fastdepCC_TRUE@,$am__fastdepCC_TRUE,;t t -s,@am__fastdepCC_FALSE@,$am__fastdepCC_FALSE,;t t -s,@CXX@,$CXX,;t t -s,@CXXFLAGS@,$CXXFLAGS,;t t -s,@ac_ct_CXX@,$ac_ct_CXX,;t t -s,@CXXDEPMODE@,$CXXDEPMODE,;t t -s,@am__fastdepCXX_TRUE@,$am__fastdepCXX_TRUE,;t t -s,@am__fastdepCXX_FALSE@,$am__fastdepCXX_FALSE,;t t -s,@build@,$build,;t t -s,@build_cpu@,$build_cpu,;t t -s,@build_vendor@,$build_vendor,;t t -s,@build_os@,$build_os,;t t -s,@host@,$host,;t t -s,@host_cpu@,$host_cpu,;t t -s,@host_vendor@,$host_vendor,;t t -s,@host_os@,$host_os,;t t -s,@EGREP@,$EGREP,;t t -s,@LN_S@,$LN_S,;t t -s,@ECHO@,$ECHO,;t t -s,@AR@,$AR,;t t -s,@ac_ct_AR@,$ac_ct_AR,;t t -s,@RANLIB@,$RANLIB,;t t -s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t -s,@CPP@,$CPP,;t t -s,@CXXCPP@,$CXXCPP,;t t -s,@F77@,$F77,;t t -s,@FFLAGS@,$FFLAGS,;t t -s,@ac_ct_F77@,$ac_ct_F77,;t t -s,@LIBTOOL@,$LIBTOOL,;t t -s,@HAVE_DOXYGEN@,$HAVE_DOXYGEN,;t t -s,@HAVE_DOXYGEN_TRUE@,$HAVE_DOXYGEN_TRUE,;t t -s,@HAVE_DOXYGEN_FALSE@,$HAVE_DOXYGEN_FALSE,;t t -s,@LIBOBJS@,$LIBOBJS,;t t -s,@LTLIBOBJS@,$LTLIBOBJS,;t t -CEOF - -_ACEOF - - cat >>$CONFIG_STATUS <<\_ACEOF - # Split the substitutions into bite-sized pieces for seds with - # small command number limits, like on Digital OSF/1 and HP-UX. - ac_max_sed_lines=48 - ac_sed_frag=1 # Number of current file. - ac_beg=1 # First line for current file. - ac_end=$ac_max_sed_lines # Line after last line for current file. - ac_more_lines=: - ac_sed_cmds= - while $ac_more_lines; do - if test $ac_beg -gt 1; then - sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag - else - sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag - fi - if test ! -s $tmp/subs.frag; then - ac_more_lines=false - else - # The purpose of the label and of the branching condition is to - # speed up the sed processing (if there are no `@' at all, there - # is no need to browse any of the substitutions). - # These are the two extra sed commands mentioned above. - (echo ':t - /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed - if test -z "$ac_sed_cmds"; then - ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" - else - ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" - fi - ac_sed_frag=`expr $ac_sed_frag + 1` - ac_beg=$ac_end - ac_end=`expr $ac_end + $ac_max_sed_lines` - fi - done - if test -z "$ac_sed_cmds"; then - ac_sed_cmds=cat - fi -fi # test -n "$CONFIG_FILES" +# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes +# DIR into the resulting binary. +hardcode_direct=$hardcode_direct_CXX -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF -for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". - case $ac_file in - - | *:- | *:-:* ) # input from stdin - cat >$tmp/stdin - ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; - *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; - * ) ac_file_in=$ac_file.in ;; - esac +# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes +# DIR into the resulting binary and the resulting library dependency is +# "absolute",i.e impossible to change by setting \${shlibpath_var} if the +# library is relocated. +hardcode_direct_absolute=$hardcode_direct_absolute_CXX - # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. - ac_dir=`(dirname "$ac_file") 2>/dev/null || -$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - { if $as_mkdir_p; then - mkdir -p "$ac_dir" - else - as_dir="$ac_dir" - as_dirs= - while test ! -d "$as_dir"; do - as_dirs="$as_dir $as_dirs" - as_dir=`(dirname "$as_dir") 2>/dev/null || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - done - test ! -n "$as_dirs" || mkdir $as_dirs - fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 -echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} - { (exit 1); exit 1; }; }; } +# Set to "yes" if using the -LDIR flag during linking hardcodes DIR +# into the resulting binary. +hardcode_minus_L=$hardcode_minus_L_CXX - ac_builddir=. +# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR +# into the resulting binary. +hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX -if test "$ac_dir" != .; then - ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` - # A "../" for each directory in $ac_dir_suffix. - ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` -else - ac_dir_suffix= ac_top_builddir= -fi +# Set to "yes" if building a shared library automatically hardcodes DIR +# into the library and all subsequent libraries and executables linked +# against it. +hardcode_automatic=$hardcode_automatic_CXX -case $srcdir in - .) # No --srcdir option. We are building in place. - ac_srcdir=. - if test -z "$ac_top_builddir"; then - ac_top_srcdir=. - else - ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` - fi ;; - [\\/]* | ?:[\\/]* ) # Absolute path. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir ;; - *) # Relative path. - ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_builddir$srcdir ;; -esac +# Set to yes if linker adds runtime paths of dependent libraries +# to runtime path list. +inherit_rpath=$inherit_rpath_CXX -# Do not use `cd foo && pwd` to compute absolute paths, because -# the directories may not exist. -case `pwd` in -.) ac_abs_builddir="$ac_dir";; -*) - case "$ac_dir" in - .) ac_abs_builddir=`pwd`;; - [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; - *) ac_abs_builddir=`pwd`/"$ac_dir";; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_builddir=${ac_top_builddir}.;; -*) - case ${ac_top_builddir}. in - .) ac_abs_top_builddir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; - *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_srcdir=$ac_srcdir;; -*) - case $ac_srcdir in - .) ac_abs_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; - *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_srcdir=$ac_top_srcdir;; -*) - case $ac_top_srcdir in - .) ac_abs_top_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; - *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; - esac;; -esac +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$link_all_deplibs_CXX +# Set to "yes" if exported symbols are required. +always_export_symbols=$always_export_symbols_CXX - case $INSTALL in - [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; - *) ac_INSTALL=$ac_top_builddir$INSTALL ;; - esac +# The commands to list exported symbols. +export_symbols_cmds=$lt_export_symbols_cmds_CXX - if test x"$ac_file" != x-; then - { echo "$as_me:$LINENO: creating $ac_file" >&5 -echo "$as_me: creating $ac_file" >&6;} - rm -f "$ac_file" - fi - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated by config.status. */ - if test x"$ac_file" = x-; then - configure_input= - else - configure_input="$ac_file. " - fi - configure_input=$configure_input"Generated from `echo $ac_file_in | - sed 's,.*/,,'` by configure." +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_exclude_expsyms_CXX - # First look for the input files in the build tree, otherwise in the - # src tree. - ac_file_inputs=`IFS=: - for f in $ac_file_in; do - case $f in - -) echo $tmp/stdin ;; - [\\/$]*) - # Absolute (can't be DOS-style, as IFS=:) - test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 -echo "$as_me: error: cannot find input file: $f" >&2;} - { (exit 1); exit 1; }; } - echo "$f";; - *) # Relative - if test -f "$f"; then - # Build tree - echo "$f" - elif test -f "$srcdir/$f"; then - # Source tree - echo "$srcdir/$f" - else - # /dev/null tree - { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 -echo "$as_me: error: cannot find input file: $f" >&2;} - { (exit 1); exit 1; }; } - fi;; - esac - done` || { (exit 1); exit 1; } -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF - sed "$ac_vpsub -$extrasub -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF -:t -/@[a-zA-Z_][a-zA-Z_0-9]*@/!b -s,@configure_input@,$configure_input,;t t -s,@srcdir@,$ac_srcdir,;t t -s,@abs_srcdir@,$ac_abs_srcdir,;t t -s,@top_srcdir@,$ac_top_srcdir,;t t -s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t -s,@builddir@,$ac_builddir,;t t -s,@abs_builddir@,$ac_abs_builddir,;t t -s,@top_builddir@,$ac_top_builddir,;t t -s,@abs_top_builddir@,$ac_abs_top_builddir,;t t -s,@INSTALL@,$ac_INSTALL,;t t -" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out - rm -f $tmp/stdin - if test x"$ac_file" != x-; then - mv $tmp/out $ac_file - else - cat $tmp/out - rm -f $tmp/out - fi +# Symbols that must always be exported. +include_expsyms=$lt_include_expsyms_CXX -done -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF +# Commands necessary for linking programs (against libraries) with templates. +prelink_cmds=$lt_prelink_cmds_CXX -# -# CONFIG_COMMANDS section. -# -for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue - ac_dest=`echo "$ac_file" | sed 's,:.*,,'` - ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_dir=`(dirname "$ac_dest") 2>/dev/null || -$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_dest" : 'X\(//\)[^/]' \| \ - X"$ac_dest" : 'X\(//\)$' \| \ - X"$ac_dest" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$ac_dest" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - { if $as_mkdir_p; then - mkdir -p "$ac_dir" - else - as_dir="$ac_dir" - as_dirs= - while test ! -d "$as_dir"; do - as_dirs="$as_dir $as_dirs" - as_dir=`(dirname "$as_dir") 2>/dev/null || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - done - test ! -n "$as_dirs" || mkdir $as_dirs - fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 -echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} - { (exit 1); exit 1; }; }; } +# Commands necessary for finishing linking programs. +postlink_cmds=$lt_postlink_cmds_CXX - ac_builddir=. +# Specify filename containing input files. +file_list_spec=$lt_file_list_spec_CXX -if test "$ac_dir" != .; then - ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` - # A "../" for each directory in $ac_dir_suffix. - ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` -else - ac_dir_suffix= ac_top_builddir= -fi +# How to hardcode a shared library path into an executable. +hardcode_action=$hardcode_action_CXX -case $srcdir in - .) # No --srcdir option. We are building in place. - ac_srcdir=. - if test -z "$ac_top_builddir"; then - ac_top_srcdir=. - else - ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` - fi ;; - [\\/]* | ?:[\\/]* ) # Absolute path. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir ;; - *) # Relative path. - ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_builddir$srcdir ;; -esac +# The directories searched by this compiler when creating a shared library. +compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_CXX -# Do not use `cd foo && pwd` to compute absolute paths, because -# the directories may not exist. -case `pwd` in -.) ac_abs_builddir="$ac_dir";; -*) - case "$ac_dir" in - .) ac_abs_builddir=`pwd`;; - [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; - *) ac_abs_builddir=`pwd`/"$ac_dir";; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_builddir=${ac_top_builddir}.;; -*) - case ${ac_top_builddir}. in - .) ac_abs_top_builddir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; - *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_srcdir=$ac_srcdir;; -*) - case $ac_srcdir in - .) ac_abs_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; - *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_srcdir=$ac_top_srcdir;; -*) - case $ac_top_srcdir in - .) ac_abs_top_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; - *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; - esac;; -esac +# Dependencies to place before and after the objects being linked to +# create a shared library. +predep_objects=$lt_predep_objects_CXX +postdep_objects=$lt_postdep_objects_CXX +predeps=$lt_predeps_CXX +postdeps=$lt_postdeps_CXX +# The library search path used internally by the compiler when linking +# a shared library. +compiler_lib_search_path=$lt_compiler_lib_search_path_CXX - { echo "$as_me:$LINENO: executing $ac_dest commands" >&5 -echo "$as_me: executing $ac_dest commands" >&6;} - case $ac_dest in - depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named `Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # So let's grep whole file. - if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then - dirpart=`(dirname "$mf") 2>/dev/null || -$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$mf" : 'X\(//\)[^/]' \| \ - X"$mf" : 'X\(//\)$' \| \ - X"$mf" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$mf" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running `make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # When using ansi2knr, U may be empty or an underscore; expand it - U=`sed -n 's/^U = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`(dirname "$file") 2>/dev/null || -$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$file" : 'X\(//\)[^/]' \| \ - X"$file" : 'X\(//\)$' \| \ - X"$file" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - { if $as_mkdir_p; then - mkdir -p $dirpart/$fdir - else - as_dir=$dirpart/$fdir - as_dirs= - while test ! -d "$as_dir"; do - as_dirs="$as_dir $as_dirs" - as_dir=`(dirname "$as_dir") 2>/dev/null || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - done - test ! -n "$as_dirs" || mkdir $as_dirs - fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5 -echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;} - { (exit 1); exit 1; }; }; } +# ### END LIBTOOL TAG CONFIG: CXX +_LT_EOF - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done -done ;; + esac -done -_ACEOF +done # for ac_tag -cat >>$CONFIG_STATUS <<\_ACEOF -{ (exit 0); exit 0; } +as_fn_exit 0 _ACEOF -chmod +x $CONFIG_STATUS ac_clean_files=$ac_clean_files_save +test $ac_write_fail = 0 || + as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 + # configure is writing to config.log, and then calls config.status. # config.status does its own redirection, appending to config.log. @@ -21980,7 +18030,11 @@ if test "$no_create" != yes; then exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. - $ac_cs_success || { (exit 1); exit 1; } + $ac_cs_success || as_fn_exit 1 +fi +if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 +$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} fi --- libcoyotl-3.1.0.orig/test/Makefile.in +++ libcoyotl-3.1.0/test/Makefile.in @@ -1,8 +1,9 @@ -# Makefile.in generated by automake 1.9.6 from Makefile.am. +# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005 Free Software Foundation, Inc. +# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, +# Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -14,15 +15,12 @@ @SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ -top_builddir = .. +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -INSTALL = @INSTALL@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c @@ -45,8 +43,8 @@ am__configure_deps = $(am__aclocal_m4_de $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = am__installdirs = "$(DESTDIR)$(bindir)" -binPROGRAMS_INSTALL = $(INSTALL_PROGRAM) PROGRAMS = $(bin_PROGRAMS) am_test_maze_OBJECTS = test_maze.$(OBJEXT) test_maze_OBJECTS = $(am_test_maze_OBJECTS) @@ -54,25 +52,25 @@ test_maze_LDADD = $(LDADD) am_test_prng_OBJECTS = test_prng.$(OBJEXT) test_prng_OBJECTS = $(am_test_prng_OBJECTS) test_prng_LDADD = $(LDADD) -DEFAULT_INCLUDES = -I. -I$(srcdir) +DEFAULT_INCLUDES = -I.@am__isrc@ depcomp = $(SHELL) $(top_srcdir)/depcomp am__depfiles_maybe = depfiles +am__mv = mv -f CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -LTCXXCOMPILE = $(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) \ - $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ - $(AM_CXXFLAGS) $(CXXFLAGS) +LTCXXCOMPILE = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ + --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ + $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) CXXLD = $(CXX) -CXXLINK = $(LIBTOOL) --tag=CXX --mode=link $(CXXLD) $(AM_CXXFLAGS) \ - $(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ +CXXLINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ + --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) \ + $(LDFLAGS) -o $@ SOURCES = $(test_maze_SOURCES) $(test_prng_SOURCES) DIST_SOURCES = $(test_maze_SOURCES) $(test_prng_SOURCES) ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ -AMDEP_FALSE = @AMDEP_FALSE@ -AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ AR = @AR@ AUTOCONF = @AUTOCONF@ @@ -91,55 +89,65 @@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ -ECHO = @ECHO@ +DLLTOOL = @DLLTOOL@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ -F77 = @F77@ -FFLAGS = @FFLAGS@ +FGREP = @FGREP@ GENERIC_LIBRARY_NAME = @GENERIC_LIBRARY_NAME@ GENERIC_LIBRARY_VERSION = @GENERIC_LIBRARY_VERSION@ GENERIC_RELEASE = @GENERIC_RELEASE@ GENERIC_VERSION = @GENERIC_VERSION@ +GREP = @GREP@ HAVE_DOXYGEN = @HAVE_DOXYGEN@ -HAVE_DOXYGEN_FALSE = @HAVE_DOXYGEN_FALSE@ -HAVE_DOXYGEN_TRUE = @HAVE_DOXYGEN_TRUE@ +INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = -L../libcoyotl -lrt -lpng -lcoyotl LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ +MKDIR_P = @MKDIR_P@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ +SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ -ac_ct_F77 = @ac_ct_F77@ -ac_ct_RANLIB = @ac_ct_RANLIB@ -ac_ct_STRIP = @ac_ct_STRIP@ -am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ -am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ -am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ -am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ @@ -151,28 +159,40 @@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ +builddir = @builddir@ datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ +htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ +localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ +psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ test_prng_SOURCES = test_prng.cpp test_maze_SOURCES = test_maze.cpp all: all-am @@ -183,14 +203,14 @@ $(srcdir)/Makefile.in: $(srcdir)/Makefi @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ - && exit 0; \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign test/Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign test/Makefile + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign test/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign test/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ @@ -208,40 +228,56 @@ $(top_srcdir)/configure: $(am__configur cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): install-binPROGRAMS: $(bin_PROGRAMS) @$(NORMAL_INSTALL) - test -z "$(bindir)" || $(mkdir_p) "$(DESTDIR)$(bindir)" - @list='$(bin_PROGRAMS)'; for p in $$list; do \ - p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - if test -f $$p \ - || test -f $$p1 \ - ; then \ - f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \ - $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \ - else :; fi; \ - done + test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)" + @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ + for p in $$list; do echo "$$p $$p"; done | \ + sed 's/$(EXEEXT)$$//' | \ + while read p p1; do if test -f $$p || test -f $$p1; \ + then echo "$$p"; echo "$$p"; else :; fi; \ + done | \ + sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \ + -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ + sed 'N;N;N;s,\n, ,g' | \ + $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ + { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ + if ($$2 == $$4) files[d] = files[d] " " $$1; \ + else { print "f", $$3 "/" $$4, $$1; } } \ + END { for (d in files) print "f", d, files[d] }' | \ + while read type dir files; do \ + if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ + test -z "$$files" || { \ + echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \ + $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ + } \ + ; done uninstall-binPROGRAMS: @$(NORMAL_UNINSTALL) - @list='$(bin_PROGRAMS)'; for p in $$list; do \ - f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \ - rm -f "$(DESTDIR)$(bindir)/$$f"; \ - done + @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ + files=`for p in $$list; do echo "$$p"; done | \ + sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ + -e 's/$$/$(EXEEXT)/' `; \ + test -n "$$list" || exit 0; \ + echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(bindir)" && rm -f $$files clean-binPROGRAMS: - @list='$(bin_PROGRAMS)'; for p in $$list; do \ - f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f $$p $$f"; \ - rm -f $$p $$f ; \ - done + @list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \ + echo " rm -f" $$list; \ + rm -f $$list || exit $$?; \ + test -n "$(EXEEXT)" || exit 0; \ + list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ + echo " rm -f" $$list; \ + rm -f $$list test_maze$(EXEEXT): $(test_maze_OBJECTS) $(test_maze_DEPENDENCIES) @rm -f test_maze$(EXEEXT) - $(CXXLINK) $(test_maze_LDFLAGS) $(test_maze_OBJECTS) $(test_maze_LDADD) $(LIBS) + $(CXXLINK) $(test_maze_OBJECTS) $(test_maze_LDADD) $(LIBS) test_prng$(EXEEXT): $(test_prng_OBJECTS) $(test_prng_DEPENDENCIES) @rm -f test_prng$(EXEEXT) - $(CXXLINK) $(test_prng_LDFLAGS) $(test_prng_OBJECTS) $(test_prng_LDADD) $(LIBS) + $(CXXLINK) $(test_prng_OBJECTS) $(test_prng_LDADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) @@ -253,22 +289,22 @@ distclean-compile: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test_prng.Po@am__quote@ .cpp.o: -@am__fastdepCXX_TRUE@ if $(CXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ -@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi +@am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ $< .cpp.obj: -@am__fastdepCXX_TRUE@ if $(CXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ -@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi +@am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'` .cpp.lo: -@am__fastdepCXX_TRUE@ if $(LTCXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ -@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi +@am__fastdepCXX_TRUE@ $(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(LTCXXCOMPILE) -c -o $@ $< @@ -279,82 +315,85 @@ mostlyclean-libtool: clean-libtool: -rm -rf .libs _libs -distclean-libtool: - -rm -f libtool -uninstall-info-am: - ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) - tags=; \ + set x; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ fi ctags: CTAGS CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - test -z "$(CTAGS_ARGS)$$tags$$unique" \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$tags $$unique + $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ - list='$(DISTFILES)'; for file in $$list; do \ - case $$file in \ - $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ - $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ - esac; \ + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkdir_p) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @@ -363,7 +402,7 @@ check: check-am all-am: Makefile $(PROGRAMS) installdirs: for dir in "$(DESTDIR)$(bindir)"; do \ - test -z "$$dir" || $(mkdir_p) "$$dir"; \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am @@ -385,6 +424,7 @@ clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @@ -397,7 +437,7 @@ distclean: distclean-am -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ - distclean-libtool distclean-tags + distclean-tags dvi: dvi-am @@ -405,18 +445,38 @@ dvi-am: html: html-am +html-am: + info: info-am info-am: install-data-am: +install-dvi: install-dvi-am + +install-dvi-am: + install-exec-am: install-binPROGRAMS +install-html: install-html-am + +install-html-am: + install-info: install-info-am +install-info-am: + install-man: +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + installcheck-am: maintainer-clean: maintainer-clean-am @@ -437,19 +497,24 @@ ps: ps-am ps-am: -uninstall-am: uninstall-binPROGRAMS uninstall-info-am +uninstall-am: uninstall-binPROGRAMS + +.MAKE: install-am install-strip .PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \ clean-generic clean-libtool ctags distclean distclean-compile \ distclean-generic distclean-libtool distclean-tags distdir dvi \ dvi-am html html-am info info-am install install-am \ - install-binPROGRAMS install-data install-data-am install-exec \ - install-exec-am install-info install-info-am install-man \ + install-binPROGRAMS install-data install-data-am install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am install-man \ + install-pdf install-pdf-am install-ps install-ps-am \ install-strip installcheck installcheck-am installdirs \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ pdf pdf-am ps ps-am tags uninstall uninstall-am \ - uninstall-binPROGRAMS uninstall-info-am + uninstall-binPROGRAMS + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. --- libcoyotl-3.1.0.orig/docs/Makefile.in +++ libcoyotl-3.1.0/docs/Makefile.in @@ -1,8 +1,9 @@ -# Makefile.in generated by automake 1.9.6 from Makefile.am. +# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005 Free Software Foundation, Inc. +# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, +# Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -14,15 +15,12 @@ @SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ -top_builddir = .. +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -INSTALL = @INSTALL@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c @@ -44,6 +42,7 @@ am__configure_deps = $(am__aclocal_m4_de $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = SOURCES = DIST_SOURCES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; @@ -51,14 +50,26 @@ am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; -am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__installdirs = "$(DESTDIR)$(htmldir)" -htmlDATA_INSTALL = $(INSTALL_DATA) DATA = $(html_DATA) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ -AMDEP_FALSE = @AMDEP_FALSE@ -AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ AR = @AR@ AUTOCONF = @AUTOCONF@ @@ -77,55 +88,65 @@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ -ECHO = @ECHO@ +DLLTOOL = @DLLTOOL@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ -F77 = @F77@ -FFLAGS = @FFLAGS@ +FGREP = @FGREP@ GENERIC_LIBRARY_NAME = @GENERIC_LIBRARY_NAME@ GENERIC_LIBRARY_VERSION = @GENERIC_LIBRARY_VERSION@ GENERIC_RELEASE = @GENERIC_RELEASE@ GENERIC_VERSION = @GENERIC_VERSION@ +GREP = @GREP@ HAVE_DOXYGEN = @HAVE_DOXYGEN@ -HAVE_DOXYGEN_FALSE = @HAVE_DOXYGEN_FALSE@ -HAVE_DOXYGEN_TRUE = @HAVE_DOXYGEN_TRUE@ +INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ +MKDIR_P = @MKDIR_P@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ +SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ -ac_ct_F77 = @ac_ct_F77@ -ac_ct_RANLIB = @ac_ct_RANLIB@ -ac_ct_STRIP = @ac_ct_STRIP@ -am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ -am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ -am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ -am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ @@ -137,31 +158,42 @@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ +builddir = @builddir@ datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ +htmldir = $(datadir)/doc/$(GENERIC_LIBRARY_NAME)/api includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ +localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ +psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ EXTRA_DIST = libcoyotl.doxygen libcoyotl_foot.html libcoyotl_head.html CLEANFILES = html/* -htmldir = $(datadir)/doc/$(GENERIC_LIBRARY_NAME)/api html_DATA = html/index.html all: all-am @@ -170,14 +202,14 @@ $(srcdir)/Makefile.in: $(srcdir)/Makefi @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ - && exit 0; \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign docs/Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign docs/Makefile + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign docs/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign docs/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ @@ -195,33 +227,33 @@ $(top_srcdir)/configure: $(am__configur cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs - -distclean-libtool: - -rm -f libtool -uninstall-info-am: install-htmlDATA: $(html_DATA) @$(NORMAL_INSTALL) - test -z "$(htmldir)" || $(mkdir_p) "$(DESTDIR)$(htmldir)" - @list='$(html_DATA)'; for p in $$list; do \ + test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)" + @list='$(html_DATA)'; test -n "$(htmldir)" || list=; \ + for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - f=$(am__strip_dir) \ - echo " $(htmlDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \ - $(htmlDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \ done uninstall-htmlDATA: @$(NORMAL_UNINSTALL) - @list='$(html_DATA)'; for p in $$list; do \ - f=$(am__strip_dir) \ - echo " rm -f '$(DESTDIR)$(htmldir)/$$f'"; \ - rm -f "$(DESTDIR)$(htmldir)/$$f"; \ - done + @list='$(html_DATA)'; test -n "$(htmldir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + test -n "$$files" || exit 0; \ + echo " ( cd '$(DESTDIR)$(htmldir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(htmldir)" && rm -f $$files tags: TAGS TAGS: @@ -230,29 +262,32 @@ CTAGS: distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ - list='$(DISTFILES)'; for file in $$list; do \ - case $$file in \ - $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ - $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ - esac; \ + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkdir_p) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @@ -261,7 +296,7 @@ check: check-am all-am: Makefile $(DATA) installdirs: for dir in "$(DESTDIR)$(htmldir)"; do \ - test -z "$$dir" || $(mkdir_p) "$$dir"; \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am @@ -284,6 +319,7 @@ clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @@ -294,7 +330,7 @@ clean-am: clean-generic clean-libtool mo distclean: distclean-am -rm -f Makefile -distclean-am: clean-am distclean-generic distclean-libtool +distclean-am: clean-am distclean-generic dvi: dvi-am @@ -302,6 +338,8 @@ dvi-am: html: html-am +html-am: + info: info-am info-am: @@ -309,13 +347,30 @@ info-am: install-data-am: install-htmlDATA @$(NORMAL_INSTALL) $(MAKE) $(AM_MAKEFLAGS) install-data-hook +install-dvi: install-dvi-am + +install-dvi-am: install-exec-am: +install-html: install-html-am + +install-html-am: + install-info: install-info-am +install-info-am: + install-man: +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + installcheck-am: maintainer-clean: maintainer-clean-am @@ -334,18 +389,21 @@ ps: ps-am ps-am: -uninstall-am: uninstall-htmlDATA uninstall-info-am +uninstall-am: uninstall-htmlDATA + +.MAKE: install-am install-data-am install-strip .PHONY: all all-am check check-am clean clean-generic clean-libtool \ distclean distclean-generic distclean-libtool distdir dvi \ dvi-am html html-am info info-am install install-am \ - install-data install-data-am install-data-hook install-exec \ - install-exec-am install-htmlDATA install-info install-info-am \ - install-man install-strip installcheck installcheck-am \ + install-data install-data-am install-data-hook install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-htmlDATA install-info install-info-am \ + install-man install-pdf install-pdf-am install-ps \ + install-ps-am install-strip installcheck installcheck-am \ installdirs maintainer-clean maintainer-clean-generic \ mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ - ps ps-am uninstall uninstall-am uninstall-htmlDATA \ - uninstall-info-am + ps ps-am uninstall uninstall-am uninstall-htmlDATA html/index.html: libcoyotl.doxygen @@ -353,6 +411,7 @@ html/index.html: libcoyotl.doxygen install-data-hook: cp -dR html/* $(DESTDIR)$(htmldir) + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: --- libcoyotl-3.1.0.orig/libcoyotl/Makefile.in +++ libcoyotl-3.1.0/libcoyotl/Makefile.in @@ -1,8 +1,9 @@ -# Makefile.in generated by automake 1.9.6 from Makefile.am. +# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005 Free Software Foundation, Inc. +# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, +# Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -15,15 +16,12 @@ @SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ -top_builddir = .. +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -INSTALL = @INSTALL@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c @@ -46,15 +44,30 @@ am__configure_deps = $(am__aclocal_m4_de $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; -am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__installdirs = "$(DESTDIR)$(libdir)" \ "$(DESTDIR)$(library_includedir)" -libLTLIBRARIES_INSTALL = $(INSTALL) LTLIBRARIES = $(lib_LTLIBRARIES) libcoyotl_la_LIBADD = am__objects_1 = @@ -63,35 +76,38 @@ am__objects_2 = crccalc.lo realutil.lo c mwc1038.lo kissrng.lo mwc256.lo cmwc4096.lo am_libcoyotl_la_OBJECTS = $(am__objects_1) $(am__objects_2) libcoyotl_la_OBJECTS = $(am_libcoyotl_la_OBJECTS) -DEFAULT_INCLUDES = -I. -I$(srcdir) +libcoyotl_la_LINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CXXLD) $(AM_CXXFLAGS) \ + $(CXXFLAGS) $(libcoyotl_la_LDFLAGS) $(LDFLAGS) -o $@ +DEFAULT_INCLUDES = -I.@am__isrc@ depcomp = $(SHELL) $(top_srcdir)/depcomp am__depfiles_maybe = depfiles +am__mv = mv -f CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -LTCXXCOMPILE = $(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) \ - $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ - $(AM_CXXFLAGS) $(CXXFLAGS) +LTCXXCOMPILE = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ + --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ + $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) CXXLD = $(CXX) -CXXLINK = $(LIBTOOL) --tag=CXX --mode=link $(CXXLD) $(AM_CXXFLAGS) \ - $(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ +CXXLINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ + --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) \ + $(LDFLAGS) -o $@ COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \ - $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ - $(AM_CFLAGS) $(CFLAGS) +LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ + --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ + $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) -LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ +LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ + --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ + $(LDFLAGS) -o $@ SOURCES = $(libcoyotl_la_SOURCES) DIST_SOURCES = $(libcoyotl_la_SOURCES) -library_includeHEADERS_INSTALL = $(INSTALL_HEADER) HEADERS = $(library_include_HEADERS) ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ -AMDEP_FALSE = @AMDEP_FALSE@ -AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ AR = @AR@ AUTOCONF = @AUTOCONF@ @@ -110,55 +126,65 @@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = -I. -I$(srcdir) DEPDIR = @DEPDIR@ -ECHO = @ECHO@ +DLLTOOL = @DLLTOOL@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ -F77 = @F77@ -FFLAGS = @FFLAGS@ +FGREP = @FGREP@ GENERIC_LIBRARY_NAME = @GENERIC_LIBRARY_NAME@ GENERIC_LIBRARY_VERSION = @GENERIC_LIBRARY_VERSION@ GENERIC_RELEASE = @GENERIC_RELEASE@ GENERIC_VERSION = @GENERIC_VERSION@ +GREP = @GREP@ HAVE_DOXYGEN = @HAVE_DOXYGEN@ -HAVE_DOXYGEN_FALSE = @HAVE_DOXYGEN_FALSE@ -HAVE_DOXYGEN_TRUE = @HAVE_DOXYGEN_TRUE@ +INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ +MKDIR_P = @MKDIR_P@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ +SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ -ac_ct_F77 = @ac_ct_F77@ -ac_ct_RANLIB = @ac_ct_RANLIB@ -ac_ct_STRIP = @ac_ct_STRIP@ -am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ -am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ -am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ -am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ @@ -170,28 +196,40 @@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ +builddir = @builddir@ datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ +htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ +localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ +psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ INCLUDES = -I$(top_srcdir) h_sources = array.h cmwc4096.h command_line.h crccalc.h \ kissrng.h maze.h maze_recursive.h maze_renderer.h \ @@ -215,14 +253,14 @@ $(srcdir)/Makefile.in: $(srcdir)/Makefi @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ - && exit 0; \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign libcoyotl/Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign libcoyotl/Makefile + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign libcoyotl/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign libcoyotl/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ @@ -240,23 +278,28 @@ $(top_srcdir)/configure: $(am__configur cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): install-libLTLIBRARIES: $(lib_LTLIBRARIES) @$(NORMAL_INSTALL) - test -z "$(libdir)" || $(mkdir_p) "$(DESTDIR)$(libdir)" - @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ + test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)" + @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ + list2=; for p in $$list; do \ if test -f $$p; then \ - f=$(am__strip_dir) \ - echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \ - $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \ + list2="$$list2 $$p"; \ else :; fi; \ - done + done; \ + test -z "$$list2" || { \ + echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \ + $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \ + } uninstall-libLTLIBRARIES: @$(NORMAL_UNINSTALL) - @set -x; list='$(lib_LTLIBRARIES)'; for p in $$list; do \ - p=$(am__strip_dir) \ - echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \ - $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \ + @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ + for p in $$list; do \ + $(am__strip_dir) \ + echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \ + $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \ done clean-libLTLIBRARIES: @@ -268,7 +311,7 @@ clean-libLTLIBRARIES: rm -f "$${dir}/so_locations"; \ done libcoyotl.la: $(libcoyotl_la_OBJECTS) $(libcoyotl_la_DEPENDENCIES) - $(CXXLINK) -rpath $(libdir) $(libcoyotl_la_LDFLAGS) $(libcoyotl_la_OBJECTS) $(libcoyotl_la_LIBADD) $(LIBS) + $(libcoyotl_la_LINK) -rpath $(libdir) $(libcoyotl_la_OBJECTS) $(libcoyotl_la_LIBADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) @@ -290,22 +333,22 @@ distclean-compile: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/realutil.Plo@am__quote@ .cpp.o: -@am__fastdepCXX_TRUE@ if $(CXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ -@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi +@am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ $< .cpp.obj: -@am__fastdepCXX_TRUE@ if $(CXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ -@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi +@am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'` .cpp.lo: -@am__fastdepCXX_TRUE@ if $(LTCXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ -@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi +@am__fastdepCXX_TRUE@ $(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(LTCXXCOMPILE) -c -o $@ $< @@ -315,100 +358,106 @@ mostlyclean-libtool: clean-libtool: -rm -rf .libs _libs - -distclean-libtool: - -rm -f libtool -uninstall-info-am: install-library_includeHEADERS: $(library_include_HEADERS) @$(NORMAL_INSTALL) - test -z "$(library_includedir)" || $(mkdir_p) "$(DESTDIR)$(library_includedir)" - @list='$(library_include_HEADERS)'; for p in $$list; do \ + test -z "$(library_includedir)" || $(MKDIR_P) "$(DESTDIR)$(library_includedir)" + @list='$(library_include_HEADERS)'; test -n "$(library_includedir)" || list=; \ + for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - f=$(am__strip_dir) \ - echo " $(library_includeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(library_includedir)/$$f'"; \ - $(library_includeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(library_includedir)/$$f"; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(library_includedir)'"; \ + $(INSTALL_HEADER) $$files "$(DESTDIR)$(library_includedir)" || exit $$?; \ done uninstall-library_includeHEADERS: @$(NORMAL_UNINSTALL) - @list='$(library_include_HEADERS)'; for p in $$list; do \ - f=$(am__strip_dir) \ - echo " rm -f '$(DESTDIR)$(library_includedir)/$$f'"; \ - rm -f "$(DESTDIR)$(library_includedir)/$$f"; \ - done + @list='$(library_include_HEADERS)'; test -n "$(library_includedir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + test -n "$$files" || exit 0; \ + echo " ( cd '$(DESTDIR)$(library_includedir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(library_includedir)" && rm -f $$files ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) - tags=; \ + set x; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ fi ctags: CTAGS CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - test -z "$(CTAGS_ARGS)$$tags$$unique" \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$tags $$unique + $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ - list='$(DISTFILES)'; for file in $$list; do \ - case $$file in \ - $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ - $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ - esac; \ + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkdir_p) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @@ -417,7 +466,7 @@ check: check-am all-am: Makefile $(LTLIBRARIES) $(HEADERS) installdirs: for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(library_includedir)"; do \ - test -z "$$dir" || $(mkdir_p) "$$dir"; \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am @@ -439,6 +488,7 @@ clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @@ -452,7 +502,7 @@ distclean: distclean-am -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ - distclean-libtool distclean-tags + distclean-tags dvi: dvi-am @@ -460,18 +510,38 @@ dvi-am: html: html-am +html-am: + info: info-am info-am: install-data-am: install-library_includeHEADERS +install-dvi: install-dvi-am + +install-dvi-am: + install-exec-am: install-libLTLIBRARIES +install-html: install-html-am + +install-html-am: + install-info: install-info-am +install-info-am: + install-man: +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + installcheck-am: maintainer-clean: maintainer-clean-am @@ -492,23 +562,28 @@ ps: ps-am ps-am: -uninstall-am: uninstall-info-am uninstall-libLTLIBRARIES \ +uninstall-am: uninstall-libLTLIBRARIES \ uninstall-library_includeHEADERS +.MAKE: install-am install-strip + .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ clean-libLTLIBRARIES clean-libtool ctags distclean \ distclean-compile distclean-generic distclean-libtool \ distclean-tags distdir dvi dvi-am html html-am info info-am \ - install install-am install-data install-data-am install-exec \ - install-exec-am install-info install-info-am \ + install install-am install-data install-data-am install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am \ install-libLTLIBRARIES install-library_includeHEADERS \ - install-man install-strip installcheck installcheck-am \ + install-man install-pdf install-pdf-am install-ps \ + install-ps-am install-strip installcheck installcheck-am \ installdirs maintainer-clean maintainer-clean-generic \ mostlyclean mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool pdf pdf-am ps ps-am tags uninstall \ - uninstall-am uninstall-info-am uninstall-libLTLIBRARIES \ + uninstall-am uninstall-libLTLIBRARIES \ uninstall-library_includeHEADERS + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: