pax_global_header00006660000000000000000000000064134515734440014524gustar00rootroot0000000000000052 comment=8b59a8d61eff6fa2ddd984be28da48decbe3305e libcypher-parser-0.6.2/000077500000000000000000000000001345157344400150045ustar00rootroot00000000000000libcypher-parser-0.6.2/.circleci/000077500000000000000000000000001345157344400166375ustar00rootroot00000000000000libcypher-parser-0.6.2/.circleci/config.yml000066400000000000000000000023641345157344400206340ustar00rootroot00000000000000version: 2 jobs: build: docker: - image: cleishm/libcypher-parser-build-env:0.0.1 working_directory: ~/repo environment: TERM: dumb steps: - checkout - run: name: Configuring command: | ./autogen.sh ./configure - run: name: Building command: | make make dist - run: name: Collecting artifacts command: | mkdir ~/dist cp *.tar.gz ~/dist - store_artifacts: name: Uploading distribution path: ~/dist destination: dist when: always - run: name: Running tests command: | make check - run: name: Collecting test reports command: | mkdir ~/test-reports xsltproc ./build-aux/libcheck-xml-to-junit.xsl \ lib/test/results.xml > ~/test-reports/lib-test-results.xml - store_test_results: name: Uploading test reports path: ~/test-reports destination: tests when: always - store_artifacts: name: Uploading docs path: lib/doc/html destination: libdoc libcypher-parser-0.6.2/.dockerignore000066400000000000000000000000021345157344400174500ustar00rootroot00000000000000* libcypher-parser-0.6.2/.gitignore000066400000000000000000000013151345157344400167740ustar00rootroot00000000000000.DS_Store .build .deps .libs *~ *.1 *.o *.o-* *.lo *.la *.sig *.swp *.dSYM cypher-parser.pc Makefile Makefile.in stamp-* TAGS **/doc/html **/doc/latex **/doc/man **/doc/*.pdf **/doc/*.tag **/test/*.trs **/test/*.log **/test/*.xml **/test/*_suite.c /INSTALL /aclocal.m4 /autom4te.cache /build-aux/compile /build-aux/config.* /build-aux/depcomp /build-aux/install-sh /build-aux/ltmain.sh /build-aux/missing /build-aux/test-driver /build-aux/m4/libtool.m4 /build-aux/m4/ltoptions.m4 /build-aux/m4/ltsugar.m4 /build-aux/m4/ltversion.m4 /build-aux/m4/lt~obsolete.m4 /configure /config.* /lib/src/*_leg.c /lib/src/cypher-parser.h /lib/test/check_libcypher-parser /libtool /libcypher-parser-*.tar.gz /linter/src/cypher-lint libcypher-parser-0.6.2/LICENSE000066400000000000000000000236761345157344400160270ustar00rootroot00000000000000 Apache License Version 2.0, January 2004 http://www.apache.org/licenses/ TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION 1. Definitions. "License" shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document. "Licensor" shall mean the copyright owner or entity authorized by the copyright owner that is granting the License. "Legal Entity" shall mean the union of the acting entity and all other entities that control, are controlled by, or are under common control with that entity. For the purposes of this definition, "control" means (i) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (ii) ownership of fifty percent (50%) or more of the outstanding shares, or (iii) beneficial ownership of such entity. "You" (or "Your") shall mean an individual or Legal Entity exercising permissions granted by this License. "Source" form shall mean the preferred form for making modifications, including but not limited to software source code, documentation source, and configuration files. "Object" form shall mean any form resulting from mechanical transformation or translation of a Source form, including but not limited to compiled object code, generated documentation, and conversions to other media types. "Work" shall mean the work of authorship, whether in Source or Object form, made available under the License, as indicated by a copyright notice that is included in or attached to the work (an example is provided in the Appendix below). "Derivative Works" shall mean any work, whether in Source or Object form, that is based on (or derived from) the Work and for which the editorial revisions, annotations, elaborations, or other modifications represent, as a whole, an original work of authorship. For the purposes of this License, Derivative Works shall not include works that remain separable from, or merely link (or bind by name) to the interfaces of, the Work and Derivative Works thereof. "Contribution" shall mean any work of authorship, including the original version of the Work and any modifications or additions to that Work or Derivative Works thereof, that is intentionally submitted to Licensor for inclusion in the Work by the copyright owner or by an individual or Legal Entity authorized to submit on behalf of the copyright owner. For the purposes of this definition, "submitted" means any form of electronic, verbal, or written communication sent to the Licensor or its representatives, including but not limited to communication on electronic mailing lists, source code control systems, and issue tracking systems that are managed by, or on behalf of, the Licensor for the purpose of discussing and improving the Work, but excluding communication that is conspicuously marked or otherwise designated in writing by the copyright owner as "Not a Contribution." "Contributor" shall mean Licensor and any individual or Legal Entity on behalf of whom a Contribution has been received by Licensor and subsequently incorporated within the Work. 2. Grant of Copyright License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform, sublicense, and distribute the Work and such Derivative Works in Source or Object form. 3. Grant of Patent License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable (except as stated in this section) patent license to make, have made, use, offer to sell, sell, import, and otherwise transfer the Work, where such license applies only to those patent claims licensable by such Contributor that are necessarily infringed by their Contribution(s) alone or by combination of their Contribution(s) with the Work to which such Contribution(s) was submitted. If You institute patent litigation against any entity (including a cross-claim or counterclaim in a lawsuit) alleging that the Work or a Contribution incorporated within the Work constitutes direct or contributory patent infringement, then any patent licenses granted to You under this License for that Work shall terminate as of the date such litigation is filed. 4. Redistribution. You may reproduce and distribute copies of the Work or Derivative Works thereof in any medium, with or without modifications, and in Source or Object form, provided that You meet the following conditions: (a) You must give any other recipients of the Work or Derivative Works a copy of this License; and (b) You must cause any modified files to carry prominent notices stating that You changed the files; and (c) You must retain, in the Source form of any Derivative Works that You distribute, all copyright, patent, trademark, and attribution notices from the Source form of the Work, excluding those notices that do not pertain to any part of the Derivative Works; and (d) If the Work includes a "NOTICE" text file as part of its distribution, then any Derivative Works that You distribute must include a readable copy of the attribution notices contained within such NOTICE file, excluding those notices that do not pertain to any part of the Derivative Works, in at least one of the following places: within a NOTICE text file distributed as part of the Derivative Works; within the Source form or documentation, if provided along with the Derivative Works; or, within a display generated by the Derivative Works, if and wherever such third-party notices normally appear. The contents of the NOTICE file are for informational purposes only and do not modify the License. You may add Your own attribution notices within Derivative Works that You distribute, alongside or as an addendum to the NOTICE text from the Work, provided that such additional attribution notices cannot be construed as modifying the License. You may add Your own copyright statement to Your modifications and may provide additional or different license terms and conditions for use, reproduction, or distribution of Your modifications, or for any such Derivative Works as a whole, provided Your use, reproduction, and distribution of the Work otherwise complies with the conditions stated in this License. 5. Submission of Contributions. Unless You explicitly state otherwise, any Contribution intentionally submitted for inclusion in the Work by You to the Licensor shall be under the terms and conditions of this License, without any additional terms or conditions. Notwithstanding the above, nothing herein shall supersede or modify the terms of any separate license agreement you may have executed with Licensor regarding such Contributions. 6. Trademarks. This License does not grant permission to use the trade names, trademarks, service marks, or product names of the Licensor, except as required for reasonable and customary use in describing the origin of the Work and reproducing the content of the NOTICE file. 7. Disclaimer of Warranty. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License. 8. Limitation of Liability. In no event and under no legal theory, whether in tort (including negligence), contract, or otherwise, unless required by applicable law (such as deliberate and grossly negligent acts) or agreed to in writing, shall any Contributor be liable to You for damages, including any direct, indirect, special, incidental, or consequential damages of any character arising as a result of this License or out of the use or inability to use the Work (including but not limited to damages for loss of goodwill, work stoppage, computer failure or malfunction, or any and all other commercial damages or losses), even if such Contributor has been advised of the possibility of such damages. 9. Accepting Warranty or Additional Liability. While redistributing the Work or Derivative Works thereof, You may choose to offer, and charge a fee for, acceptance of support, warranty, indemnity, or other liability obligations and/or rights consistent with this License. However, in accepting such obligations, You may act only on Your own behalf and on Your sole responsibility, not on behalf of any other Contributor, and only if You agree to indemnify, defend, and hold each Contributor harmless for any liability incurred by, or claims asserted against, such Contributor by reason of your accepting any such warranty or additional liability. END OF TERMS AND CONDITIONS libcypher-parser-0.6.2/Makefile.am000066400000000000000000000014521345157344400170420ustar00rootroot00000000000000ACLOCAL_AMFLAGS = -I build-aux/m4 SUBDIRS = lib if WANT_TOOLS SUBDIRS += linter endif EXTRA_DIST = \ LICENSE \ README.md docker-check: @$(MAKE) dist @echo "Building docker image..." @docker run -t --rm -v $(abs_builddir):/$(PACKAGE) \ `docker build . -q -f build-aux/build.dockerfile` \ sh /$(PACKAGE)/build-aux/check-package.sh /$(PACKAGE)/$(DIST_ARCHIVES) $(distdir) docker-valgrind: @$(MAKE) dist @echo "Building docker image..." @docker run --rm -t -v $(abs_builddir):/$(PACKAGE) \ `docker build . -q -f build-aux/build.dockerfile` \ sh /$(PACKAGE)/build-aux/valgrind-package.sh /$(PACKAGE)/$(DIST_ARCHIVES) $(distdir) MAINTAINERCLEANFILES = \ build-aux/m4/libtool.m4 \ build-aux/m4/ltoptions.m4 \ build-aux/m4/ltsugar.m4 \ build-aux/m4/ltversion.m4 \ build-aux/m4/lt~obsolete.m4 libcypher-parser-0.6.2/README.md000066400000000000000000000164551345157344400162760ustar00rootroot00000000000000libcypher-parser ================ About ----- libcypher-parser is a parser library and validation (lint) tool for Cypher, the graph query language. The parser is written in C, and is intended for building tools and libraries in various languages. For more details, see [the project page](https://git.io/libcypher-parser) and the [FAQ](https://github.com/cleishm/libcypher-parser/wiki/FAQ) Requirements ------------ libcypher-parser is known to work on GNU/Linux, Mac OS X and FreeBSD. Note that libcypher-parser is still a beta release, and may change in incompatible ways before a stable release is made. Getting Started --------------- If you're using Mac OS X, libcypher-parser can be installed using homebrew: ```console $ brew install cleishm/neo4j/libcypher-parser ``` or ```console $ brew install cleishm/neo4j/cypher-lint ``` If you're using Ubuntu, libcypher-parser can be install using APT: ```console $ sudo add-apt-repository ppa:cleishm/neo4j $ sudo apt-get update $ sudo apt-get install cypher-lint libcypher-parser-dev ``` For other platforms, please see [Building](#building) below. cypher-lint Usage ----------------- cypher-lint is a parser and linter for Cypher. It will parse a sequence of cypher statements from stdin and report any parse errors encountered. Optionally, it can also output an abstract syntax tree (AST) representation of the input. Basic usage: ```console $ cypher-lint -a < sample.cyp Invalid input 'S': expected AS (line 3, column 17, offset 124): RETURN s.name ASS name; ^ @0 2..45 line_comment // Return all the software that cleishm wrote @1 46..132 statement body=@2 @2 46..132 > query clauses=[@3, @17] @3 46..108 > > MATCH pattern=@4 @4 52..107 > > > pattern paths=[@5] @5 52..107 > > > > pattern path (@6)-[@12]-(@14) @6 52..84 > > > > > node pattern (@7:@8 {@9}) @7 53..54 > > > > > > identifier `n` @8 54..61 > > > > > > label :`Person` @9 62..83 > > > > > > map {@10:@11} @10 63..71 > > > > > > > prop name `username` @11 73..82 > > > > > > > string "cleishm" @12 84..95 > > > > > rel pattern -[:@13]-> @13 86..92 > > > > > > rel type :`WROTE` @14 95..107 > > > > > node pattern (@15:@16) @15 96..97 > > > > > > identifier `s` @16 97..106 > > > > > > label :`Software` @17 108..122 > > RETURN items=[@18] @18 115..122 > > > projection expression=@19, alias=@22 @19 115..122 > > > > property @20.@21 @20 115..116 > > > > > identifier `s` @21 117..121 > > > > > prop name `name` @22 115..122 > > > > identifier `s.name` @23 122..132 > > error >>ASS name;\n<< ``` ### Editor integration - Vim and NeoVim - The [ALE] linting plugin provides support for `cypher-lint`, it just needs to be available in your `$PATH`. ALE will provide instant feedback for errors when editing `cypher` files. [ALE]: https://github.com/w0rp/ale libcypher-parser Usage ---------------------- libcypher-parser provides a single C header file, `cypher-parser.h`, for inclusion in source code using the libcypher-parser API. The API is described in the [API Documentation](#api_documentation). libcypher-parser can be included in your project by linking the library at compile time, typically using the linking flag `-lcypher-parser`. Alternatively, libcypher-parser ships with a [pkg-config]( https://wiki.freedesktop.org/www/Software/pkg-config/) description file, enabling you to obtain the required flags using `pkg-config --libs libcypher-parser`. API Documentation ----------------- API documentation for the latest release is available at [https://cleishm.github.io/libcypher-parser/doc/latest/cypher-parser\_8h.html]( [https://cleishm.github.io/libcypher-parser/doc/latest/cypher-parser_8h.html). Documentation can be built using `make doc`, which will use doxygen to generate documentation and output it into the `doc/` directory of the libcypher-parser source tree. See [Building](#building) below. Example ------- ```C #include #include #include int main(int argc, char *argv[]) { cypher_parse_result_t *result = cypher_parse( "MATCH (n) RETURN n", NULL, NULL, CYPHER_PARSE_ONLY_STATEMENTS); if (result == NULL) { perror("cypher_parse"); return EXIT_FAILURE; } printf("Parsed %d AST nodes\n", cypher_parse_result_nnodes(result)); printf("Read %d statements\n", cypher_parse_result_ndirectives(result)); printf("Encountered %d errors\n", cypher_parse_result_nerrors(result)); cypher_parse_result_free(result); return EXIT_SUCCESS; } ``` Building -------- To build software using libcypher-parser, consider installing libcypher-parser using the package management system for your operating system (currently [Mac OS X](#getting_started), [Debian](https://mentors.debian.net/package/libcypher-parser) and [Ubuntu](#getting_started)). If libcypher-parser is not available via your package management system, please [download the latest release]( https://github.com/cleishm/libcypher-parser/releases), unpack and then: ```console $ ./configure $ make clean check $ sudo make install ``` Building from the GitHub repository requires a few extra steps. Firstly, some additional tooling is required, including autoconf, automake, libtool and [peg/leg](http://piumarta.com/software/peg/). Assuming these are available, to checkout from GitHub and build: ```console $ git clone https://github.com/cleishm/libcypher-parser.git $ cd libcypher-parser $ ./autogen.sh $ ./configure $ make clean check $ sudo make install ``` If you encounter warnings or errors during the build, please report them at https://github.com/cleishm/libneo4j-client/issues. If you wish to proceed dispite warnings, please invoke configure with the `--disable-werror`. Support ------- Having trouble with libcypher-parser? Please raise any issues with usage on [StackOverflow](http://stackoverflow.com/questions/tagged/libcypher-parser). If you've found a bug in the code for libcypher-parser, please raise an issue on [GitHub](https://github.com/cleishm/libcypher-parser) and include details of how to reproduce the bug. Contributing ------------ Contributions to libcypher-parser and cypher-lint are needed! Contributions should be made via pull requests made to the [GitHub repository]( https://github.com/cleishm/libcypher-parser). Please include test cases where possible, and use a style and approach consistent with the rest of the library. For a list of contributions that would be greatly appreciated, check out the [TODO list](https://github.com/cleishm/libcypher-parser/wiki/TODO). For other contributions, it may be worthwhile raising an issue on github for what you intend to do before developing the code, in order to allow for discussion and feedback on the requirements. License ------- libcypher-parser is licensed under the [Apache License, Version 2.0]( http://www.apache.org/licenses/LICENSE-2.0). Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. libcypher-parser-0.6.2/autogen.sh000077500000000000000000000003301345157344400170010ustar00rootroot00000000000000#!/bin/sh set -e srcdir=`dirname "$0"` test -z "$srcdir" && srcdir=. cd "$srcdir" || exit 1 if ! which autoreconf > /dev/null; then echo "Error: autoreconf not found." >&2 exit 1 fi autoreconf --install libcypher-parser-0.6.2/build-aux/000077500000000000000000000000001345157344400166765ustar00rootroot00000000000000libcypher-parser-0.6.2/build-aux/automake/000077500000000000000000000000001345157344400205045ustar00rootroot00000000000000libcypher-parser-0.6.2/build-aux/automake/doxygen.am000066400000000000000000000116001345157344400224760ustar00rootroot00000000000000# Copyright (c) 2009 Oren Ben-Kiki # # Copying and distribution of this file, with or without modification, are # permitted in any medium without royalty provided the copyright notice # and this notice are preserved. This file is offered as-is, without any # warranty. # # Make targets and variables values are controlled by the various # DX_COND_* conditionals set by autoconf. # # The provided targets are: # # doxygen-doc: Generate all doxygen documentation. # # doxygen-run: Run doxygen, which will generate some of the # documentation (HTML, CHM, CHI, MAN, RTF, XML) # but will not do the post processing required # for the rest of it (PS, PDF, and some MAN). # # doxygen-man: Rename some doxygen generated man pages. # # doxygen-ps: Generate doxygen PostScript documentation. # # doxygen-pdf: Generate doxygen PDF documentation. # # Note that by default these are not integrated into the automake targets. # If doxygen is used to generate man pages, you can achieve this # integration by setting man3_MANS to the list of man pages generated and # then adding the dependency: # # $(man3_MANS): doxygen-doc # # This will cause make to run doxygen and generate all the documentation. # # The following variable is intended for use in Makefile.am: # # DX_CLEANFILES = everything to clean. # # Then add this variable to MOSTLYCLEANFILES. ## --------------------------------- ## ## Format-independent Doxygen rules. ## ## --------------------------------- ## if DX_COND_doc ## ------------------------------- ## ## Rules specific for HTML output. ## ## ------------------------------- ## if DX_COND_html DX_CLEAN_HTML = @DX_DOCDIR@/html endif DX_COND_html ## ------------------------------ ## ## Rules specific for CHM output. ## ## ------------------------------ ## if DX_COND_chm DX_CLEAN_CHM = @DX_DOCDIR@/chm if DX_COND_chi DX_CLEAN_CHI = @DX_DOCDIR@/@PACKAGE@.chi endif DX_COND_chi endif DX_COND_chm ## ------------------------------ ## ## Rules specific for MAN output. ## ## ------------------------------ ## if DX_COND_man DX_CLEAN_MAN = @DX_DOCDIR@/man endif DX_COND_man ## ------------------------------ ## ## Rules specific for RTF output. ## ## ------------------------------ ## if DX_COND_rtf DX_CLEAN_RTF = @DX_DOCDIR@/rtf endif DX_COND_rtf ## ------------------------------ ## ## Rules specific for XML output. ## ## ------------------------------ ## if DX_COND_xml DX_CLEAN_XML = @DX_DOCDIR@/xml endif DX_COND_xml ## ----------------------------- ## ## Rules specific for PS output. ## ## ----------------------------- ## if DX_COND_ps DX_CLEAN_PS = @DX_DOCDIR@/@PACKAGE@.ps DX_PS_GOAL = doxygen-ps doxygen-ps: @DX_DOCDIR@/@PACKAGE@.ps @DX_DOCDIR@/@PACKAGE@.ps: @DX_DOCDIR@/@PACKAGE@.tag cd @DX_DOCDIR@/latex; \ rm -f *.aux *.toc *.idx *.ind *.ilg *.log *.out; \ $(DX_LATEX) refman.tex; \ $(MAKEINDEX_PATH) refman.idx; \ $(DX_LATEX) refman.tex; \ countdown=5; \ while $(DX_EGREP) 'Rerun (LaTeX|to get cross-references right)' \ refman.log > /dev/null 2>&1 \ && test $$countdown -gt 0; do \ $(DX_LATEX) refman.tex; \ countdown=`expr $$countdown - 1`; \ done; \ $(DX_DVIPS) -o ../@PACKAGE@.ps refman.dvi endif DX_COND_ps ## ------------------------------ ## ## Rules specific for PDF output. ## ## ------------------------------ ## if DX_COND_pdf DX_CLEAN_PDF = @DX_DOCDIR@/@PACKAGE@.pdf DX_PDF_GOAL = doxygen-pdf doxygen-pdf: @DX_DOCDIR@/@PACKAGE@.pdf @DX_DOCDIR@/@PACKAGE@.pdf: @DX_DOCDIR@/@PACKAGE@.tag cd @DX_DOCDIR@/latex; \ rm -f *.aux *.toc *.idx *.ind *.ilg *.log *.out; \ $(DX_PDFLATEX) refman.tex; \ $(DX_MAKEINDEX) refman.idx; \ $(DX_PDFLATEX) refman.tex; \ countdown=5; \ while $(DX_EGREP) 'Rerun (LaTeX|to get cross-references right)' \ refman.log > /dev/null 2>&1 \ && test $$countdown -gt 0; do \ $(DX_PDFLATEX) refman.tex; \ countdown=`expr $$countdown - 1`; \ done; \ mv refman.pdf ../@PACKAGE@.pdf endif DX_COND_pdf ## ------------------------------------------------- ## ## Rules specific for LaTeX (shared for PS and PDF). ## ## ------------------------------------------------- ## if DX_COND_latex DX_CLEAN_LATEX = @DX_DOCDIR@/latex endif DX_COND_latex .PHONY: doxygen-run doxygen-doc $(DX_PS_GOAL) $(DX_PDF_GOAL) .INTERMEDIATE: doxygen-run $(DX_PS_GOAL) $(DX_PDF_GOAL) doxygen-run: @DX_DOCDIR@/@PACKAGE@.tag doxygen-doc: doxygen-run $(DX_PS_GOAL) $(DX_PDF_GOAL) @DX_DOCDIR@/@PACKAGE@.tag: $(DX_CONFIG) $(pkginclude_HEADERS) rm -rf $(DX_CLEANFILES) $(DX_ENV) $(DX_DOXYGEN) $(srcdir)/$(DX_CONFIG) echo Timestamp >$@ DX_CLEANFILES = \ @DX_DOCDIR@/@PACKAGE@.tag \ -r \ $(DX_CLEAN_HTML) \ $(DX_CLEAN_CHM) \ $(DX_CLEAN_CHI) \ $(DX_CLEAN_MAN) \ $(DX_CLEAN_RTF) \ $(DX_CLEAN_XML) \ $(DX_CLEAN_PS) \ $(DX_CLEAN_PDF) \ $(DX_CLEAN_LATEX) endif DX_COND_doc libcypher-parser-0.6.2/build-aux/build-debian.dockerfile000066400000000000000000000011451345157344400232470ustar00rootroot00000000000000FROM debian:unstable ENV DEBIAN_FRONTEND noninteractive RUN apt-get update RUN apt-get -y upgrade RUN apt-get install -y build-essential autotools-dev automake libtool pkg-config RUN apt-get install -y check valgrind RUN apt-get install -y libssl-dev RUN apt-get install -y libedit-dev RUN apt-get install -y git-buildpackage RUN apt-get install -y vim RUN apt-get install -y doxygen RUN useradd -m build USER build RUN git config --global user.name "Chris Leishman" RUN git config --global user.email "chris@leishman.org" ENV DEBFULLNAME "Chris Leishman" ENV DEBEMAIL "chris@leishman.org" WORKDIR /home/build libcypher-parser-0.6.2/build-aux/build.dockerfile000066400000000000000000000006201345157344400220240ustar00rootroot00000000000000FROM debian:unstable ENV DEBIAN_FRONTEND noninteractive RUN apt-get update RUN apt-get -y upgrade RUN apt-get install -y build-essential autotools-dev automake libtool pkg-config RUN apt-get install -y check valgrind RUN apt-get install -y peg RUN apt-get install -y libssl-dev RUN apt-get install -y libedit-dev RUN apt-get install -y xsltproc RUN useradd -m build USER build WORKDIR /home/build libcypher-parser-0.6.2/build-aux/check-package.sh000066400000000000000000000003621345157344400217010ustar00rootroot00000000000000#!/bin/sh set -eu if [ $# -lt 2 ]; then echo "usage: $0 tarball distdir" >&2 exit 1 fi echo "Building..." set -x tar xzf $1 cd $2 ./configure --enable-silent-rules --disable-maintainer-mode --disable-dependency-tracking make check libcypher-parser-0.6.2/build-aux/libcheck-xml-to-junit.xsl000066400000000000000000000035501345157344400235420ustar00rootroot00000000000000 0 / libcypher-parser-0.6.2/build-aux/m4/000077500000000000000000000000001345157344400172165ustar00rootroot00000000000000libcypher-parser-0.6.2/build-aux/m4/ax_prog_doxygen.m4000066400000000000000000000427621345157344400226670ustar00rootroot00000000000000# =========================================================================== # http://www.gnu.org/software/autoconf-archive/ax_prog_doxygen.html # =========================================================================== # # SYNOPSIS # # DX_INIT_DOXYGEN(PROJECT-NAME, DOXYFILE-PATH, [OUTPUT-DIR]) # DX_DOXYGEN_FEATURE(ON|OFF) # DX_DOT_FEATURE(ON|OFF) # DX_HTML_FEATURE(ON|OFF) # DX_CHM_FEATURE(ON|OFF) # DX_CHI_FEATURE(ON|OFF) # DX_MAN_FEATURE(ON|OFF) # DX_RTF_FEATURE(ON|OFF) # DX_XML_FEATURE(ON|OFF) # DX_PDF_FEATURE(ON|OFF) # DX_PS_FEATURE(ON|OFF) # # DESCRIPTION # # The DX_*_FEATURE macros control the default setting for the given # Doxygen feature. Supported features are 'DOXYGEN' itself, 'DOT' for # generating graphics, 'HTML' for plain HTML, 'CHM' for compressed HTML # help (for MS users), 'CHI' for generating a seperate .chi file by the # .chm file, and 'MAN', 'RTF', 'XML', 'PDF' and 'PS' for the appropriate # output formats. The environment variable DOXYGEN_PAPER_SIZE may be # specified to override the default 'a4wide' paper size. # # By default, HTML, PDF and PS documentation is generated as this seems to # be the most popular and portable combination. MAN pages created by # Doxygen are usually problematic, though by picking an appropriate subset # and doing some massaging they might be better than nothing. CHM and RTF # are specific for MS (note that you can't generate both HTML and CHM at # the same time). The XML is rather useless unless you apply specialized # post-processing to it. # # The macros mainly control the default state of the feature. The use can # override the default by specifying --enable or --disable. The macros # ensure that contradictory flags are not given (e.g., # --enable-doxygen-html and --enable-doxygen-chm, # --enable-doxygen-anything with --disable-doxygen, etc.) Finally, each # feature will be automatically disabled (with a warning) if the required # programs are missing. # # Once all the feature defaults have been specified, call DX_INIT_DOXYGEN # with the following parameters: a one-word name for the project for use # as a filename base etc., an optional configuration file name (the # default is 'Doxyfile', the same as Doxygen's default), and an optional # output directory name (the default is 'doxygen-doc'). # # Automake Support # # The following is a template aminclude.am file for use with Automake. # Make targets and variables values are controlled by the various # DX_COND_* conditionals set by autoconf. # # The provided targets are: # # doxygen-doc: Generate all doxygen documentation. # # doxygen-run: Run doxygen, which will generate some of the # documentation (HTML, CHM, CHI, MAN, RTF, XML) # but will not do the post processing required # for the rest of it (PS, PDF, and some MAN). # # doxygen-man: Rename some doxygen generated man pages. # # doxygen-ps: Generate doxygen PostScript documentation. # # doxygen-pdf: Generate doxygen PDF documentation. # # Note that by default these are not integrated into the automake targets. # If doxygen is used to generate man pages, you can achieve this # integration by setting man3_MANS to the list of man pages generated and # then adding the dependency: # # $(man3_MANS): doxygen-doc # # This will cause make to run doxygen and generate all the documentation. # # The following variable is intended for use in Makefile.am: # # DX_CLEANFILES = everything to clean. # # Then add this variable to MOSTLYCLEANFILES. # # ----- begin aminclude.am ------------------------------------- # # ## --------------------------------- ## # ## Format-independent Doxygen rules. ## # ## --------------------------------- ## # # if DX_COND_doc # # ## ------------------------------- ## # ## Rules specific for HTML output. ## # ## ------------------------------- ## # # if DX_COND_html # # DX_CLEAN_HTML = @DX_DOCDIR@/html # # endif DX_COND_html # # ## ------------------------------ ## # ## Rules specific for CHM output. ## # ## ------------------------------ ## # # if DX_COND_chm # # DX_CLEAN_CHM = @DX_DOCDIR@/chm # # if DX_COND_chi # # DX_CLEAN_CHI = @DX_DOCDIR@/@PACKAGE@.chi # # endif DX_COND_chi # # endif DX_COND_chm # # ## ------------------------------ ## # ## Rules specific for MAN output. ## # ## ------------------------------ ## # # if DX_COND_man # # DX_CLEAN_MAN = @DX_DOCDIR@/man # # endif DX_COND_man # # ## ------------------------------ ## # ## Rules specific for RTF output. ## # ## ------------------------------ ## # # if DX_COND_rtf # # DX_CLEAN_RTF = @DX_DOCDIR@/rtf # # endif DX_COND_rtf # # ## ------------------------------ ## # ## Rules specific for XML output. ## # ## ------------------------------ ## # # if DX_COND_xml # # DX_CLEAN_XML = @DX_DOCDIR@/xml # # endif DX_COND_xml # # ## ----------------------------- ## # ## Rules specific for PS output. ## # ## ----------------------------- ## # # if DX_COND_ps # # DX_CLEAN_PS = @DX_DOCDIR@/@PACKAGE@.ps # # DX_PS_GOAL = doxygen-ps # # doxygen-ps: @DX_DOCDIR@/@PACKAGE@.ps # # @DX_DOCDIR@/@PACKAGE@.ps: @DX_DOCDIR@/@PACKAGE@.tag # cd @DX_DOCDIR@/latex; \ # rm -f *.aux *.toc *.idx *.ind *.ilg *.log *.out; \ # $(DX_LATEX) refman.tex; \ # $(MAKEINDEX_PATH) refman.idx; \ # $(DX_LATEX) refman.tex; \ # countdown=5; \ # while $(DX_EGREP) 'Rerun (LaTeX|to get cross-references right)' \ # refman.log > /dev/null 2>&1 \ # && test $$countdown -gt 0; do \ # $(DX_LATEX) refman.tex; \ # countdown=`expr $$countdown - 1`; \ # done; \ # $(DX_DVIPS) -o ../@PACKAGE@.ps refman.dvi # # endif DX_COND_ps # # ## ------------------------------ ## # ## Rules specific for PDF output. ## # ## ------------------------------ ## # # if DX_COND_pdf # # DX_CLEAN_PDF = @DX_DOCDIR@/@PACKAGE@.pdf # # DX_PDF_GOAL = doxygen-pdf # # doxygen-pdf: @DX_DOCDIR@/@PACKAGE@.pdf # # @DX_DOCDIR@/@PACKAGE@.pdf: @DX_DOCDIR@/@PACKAGE@.tag # cd @DX_DOCDIR@/latex; \ # rm -f *.aux *.toc *.idx *.ind *.ilg *.log *.out; \ # $(DX_PDFLATEX) refman.tex; \ # $(DX_MAKEINDEX) refman.idx; \ # $(DX_PDFLATEX) refman.tex; \ # countdown=5; \ # while $(DX_EGREP) 'Rerun (LaTeX|to get cross-references right)' \ # refman.log > /dev/null 2>&1 \ # && test $$countdown -gt 0; do \ # $(DX_PDFLATEX) refman.tex; \ # countdown=`expr $$countdown - 1`; \ # done; \ # mv refman.pdf ../@PACKAGE@.pdf # # endif DX_COND_pdf # # ## ------------------------------------------------- ## # ## Rules specific for LaTeX (shared for PS and PDF). ## # ## ------------------------------------------------- ## # # if DX_COND_latex # # DX_CLEAN_LATEX = @DX_DOCDIR@/latex # # endif DX_COND_latex # # .PHONY: doxygen-run doxygen-doc $(DX_PS_GOAL) $(DX_PDF_GOAL) # # .INTERMEDIATE: doxygen-run $(DX_PS_GOAL) $(DX_PDF_GOAL) # # doxygen-run: @DX_DOCDIR@/@PACKAGE@.tag # # doxygen-doc: doxygen-run $(DX_PS_GOAL) $(DX_PDF_GOAL) # # @DX_DOCDIR@/@PACKAGE@.tag: $(DX_CONFIG) $(pkginclude_HEADERS) # rm -rf @DX_DOCDIR@ # $(DX_ENV) $(DX_DOXYGEN) $(srcdir)/$(DX_CONFIG) # echo Timestamp >$@ # # DX_CLEANFILES = \ # @DX_DOCDIR@/@PACKAGE@.tag \ # -r \ # $(DX_CLEAN_HTML) \ # $(DX_CLEAN_CHM) \ # $(DX_CLEAN_CHI) \ # $(DX_CLEAN_MAN) \ # $(DX_CLEAN_RTF) \ # $(DX_CLEAN_XML) \ # $(DX_CLEAN_PS) \ # $(DX_CLEAN_PDF) \ # $(DX_CLEAN_LATEX) # # endif DX_COND_doc # # ----- end aminclude.am --------------------------------------- # # LICENSE # # Copyright (c) 2009 Oren Ben-Kiki # # Copying and distribution of this file, with or without modification, are # permitted in any medium without royalty provided the copyright notice # and this notice are preserved. This file is offered as-is, without any # warranty. #serial 13 ## ----------## ## Defaults. ## ## ----------## DX_ENV="" AC_DEFUN([DX_FEATURE_doc], ON) AC_DEFUN([DX_FEATURE_dot], OFF) AC_DEFUN([DX_FEATURE_man], OFF) AC_DEFUN([DX_FEATURE_html], ON) AC_DEFUN([DX_FEATURE_chm], OFF) AC_DEFUN([DX_FEATURE_chi], OFF) AC_DEFUN([DX_FEATURE_rtf], OFF) AC_DEFUN([DX_FEATURE_xml], OFF) AC_DEFUN([DX_FEATURE_pdf], ON) AC_DEFUN([DX_FEATURE_ps], ON) ## --------------- ## ## Private macros. ## ## --------------- ## # DX_ENV_APPEND(VARIABLE, VALUE) # ------------------------------ # Append VARIABLE="VALUE" to DX_ENV for invoking doxygen. AC_DEFUN([DX_ENV_APPEND], [AC_SUBST([DX_ENV], ["$DX_ENV $1='$2'"])]) # DX_DIRNAME_EXPR # --------------- # Expand into a shell expression prints the directory part of a path. AC_DEFUN([DX_DIRNAME_EXPR], [[expr ".$1" : '\(\.\)[^/]*$' \| "x$1" : 'x\(.*\)/[^/]*$']]) # DX_IF_FEATURE(FEATURE, IF-ON, IF-OFF) # ------------------------------------- # Expands according to the M4 (static) status of the feature. AC_DEFUN([DX_IF_FEATURE], [ifelse(DX_FEATURE_$1, ON, [$2], [$3])]) # DX_REQUIRE_PROG(VARIABLE, PROGRAM) # ---------------------------------- # Require the specified program to be found for the DX_CURRENT_FEATURE to work. AC_DEFUN([DX_REQUIRE_PROG], [ AC_PATH_TOOL([$1], [$2]) if test "$DX_FLAG_[]DX_CURRENT_FEATURE$$1" = 1; then AC_MSG_WARN([$2 not found - will not DX_CURRENT_DESCRIPTION]) AC_SUBST(DX_FLAG_[]DX_CURRENT_FEATURE, 0) fi ]) # DX_TEST_FEATURE(FEATURE) # ------------------------ # Expand to a shell expression testing whether the feature is active. AC_DEFUN([DX_TEST_FEATURE], [test "$DX_FLAG_$1" = 1]) # DX_CHECK_DEPEND(REQUIRED_FEATURE, REQUIRED_STATE) # ------------------------------------------------- # Verify that a required features has the right state before trying to turn on # the DX_CURRENT_FEATURE. AC_DEFUN([DX_CHECK_DEPEND], [ test "$DX_FLAG_$1" = "$2" \ || AC_MSG_ERROR([doxygen-DX_CURRENT_FEATURE ifelse([$2], 1, requires, contradicts) doxygen-DX_CURRENT_FEATURE]) ]) # DX_CLEAR_DEPEND(FEATURE, REQUIRED_FEATURE, REQUIRED_STATE) # ---------------------------------------------------------- # Turn off the DX_CURRENT_FEATURE if the required feature is off. AC_DEFUN([DX_CLEAR_DEPEND], [ test "$DX_FLAG_$1" = "$2" || AC_SUBST(DX_FLAG_[]DX_CURRENT_FEATURE, 0) ]) # DX_FEATURE_ARG(FEATURE, DESCRIPTION, # CHECK_DEPEND, CLEAR_DEPEND, # REQUIRE, DO-IF-ON, DO-IF-OFF) # -------------------------------------------- # Parse the command-line option controlling a feature. CHECK_DEPEND is called # if the user explicitly turns the feature on (and invokes DX_CHECK_DEPEND), # otherwise CLEAR_DEPEND is called to turn off the default state if a required # feature is disabled (using DX_CLEAR_DEPEND). REQUIRE performs additional # requirement tests (DX_REQUIRE_PROG). Finally, an automake flag is set and # DO-IF-ON or DO-IF-OFF are called according to the final state of the feature. AC_DEFUN([DX_ARG_ABLE], [ AC_DEFUN([DX_CURRENT_FEATURE], [$1]) AC_DEFUN([DX_CURRENT_DESCRIPTION], [$2]) AC_ARG_ENABLE(doxygen-$1, [AS_HELP_STRING(DX_IF_FEATURE([$1], [--disable-doxygen-$1], [--enable-doxygen-$1]), DX_IF_FEATURE([$1], [don't $2], [$2]))], [ case "$enableval" in #( y|Y|yes|Yes|YES) AC_SUBST([DX_FLAG_$1], 1) $3 ;; #( n|N|no|No|NO) AC_SUBST([DX_FLAG_$1], 0) ;; #( *) AC_MSG_ERROR([invalid value '$enableval' given to doxygen-$1]) ;; esac ], [ AC_SUBST([DX_FLAG_$1], [DX_IF_FEATURE([$1], 1, 0)]) $4 ]) if DX_TEST_FEATURE([$1]); then $5 : fi AM_CONDITIONAL(DX_COND_$1, DX_TEST_FEATURE([$1])) if DX_TEST_FEATURE([$1]); then $6 : else $7 : fi ]) ## -------------- ## ## Public macros. ## ## -------------- ## # DX_XXX_FEATURE(DEFAULT_STATE) # ----------------------------- AC_DEFUN([DX_DOXYGEN_FEATURE], [AC_DEFUN([DX_FEATURE_doc], [$1])]) AC_DEFUN([DX_DOT_FEATURE], [AC_DEFUN([DX_FEATURE_dot], [$1])]) AC_DEFUN([DX_MAN_FEATURE], [AC_DEFUN([DX_FEATURE_man], [$1])]) AC_DEFUN([DX_HTML_FEATURE], [AC_DEFUN([DX_FEATURE_html], [$1])]) AC_DEFUN([DX_CHM_FEATURE], [AC_DEFUN([DX_FEATURE_chm], [$1])]) AC_DEFUN([DX_CHI_FEATURE], [AC_DEFUN([DX_FEATURE_chi], [$1])]) AC_DEFUN([DX_RTF_FEATURE], [AC_DEFUN([DX_FEATURE_rtf], [$1])]) AC_DEFUN([DX_XML_FEATURE], [AC_DEFUN([DX_FEATURE_xml], [$1])]) AC_DEFUN([DX_XML_FEATURE], [AC_DEFUN([DX_FEATURE_xml], [$1])]) AC_DEFUN([DX_PDF_FEATURE], [AC_DEFUN([DX_FEATURE_pdf], [$1])]) AC_DEFUN([DX_PS_FEATURE], [AC_DEFUN([DX_FEATURE_ps], [$1])]) # DX_INIT_DOXYGEN(PROJECT, [CONFIG-FILE], [OUTPUT-DOC-DIR]) # --------------------------------------------------------- # PROJECT also serves as the base name for the documentation files. # The default CONFIG-FILE is "Doxyfile" and OUTPUT-DOC-DIR is "doxygen-doc". AC_DEFUN([DX_INIT_DOXYGEN], [ # Files: AC_SUBST([DX_PROJECT], [$1]) AC_SUBST([DX_CONFIG], [ifelse([$2], [], Doxyfile, [$2])]) AC_SUBST([DX_DOCDIR], [ifelse([$3], [], doxygen-doc, [$3])]) # Environment variables used inside doxygen.cfg: DX_ENV_APPEND(SRCDIR, $srcdir) DX_ENV_APPEND(PROJECT, $DX_PROJECT) DX_ENV_APPEND(DOCDIR, $DX_DOCDIR) DX_ENV_APPEND(VERSION, $PACKAGE_VERSION) # Doxygen itself: DX_ARG_ABLE(doc, [generate any doxygen documentation], [], [], [DX_REQUIRE_PROG([DX_DOXYGEN], doxygen) DX_REQUIRE_PROG([DX_PERL], perl)], [DX_ENV_APPEND(PERL_PATH, $DX_PERL)]) # Dot for graphics: DX_ARG_ABLE(dot, [generate graphics for doxygen documentation], [DX_CHECK_DEPEND(doc, 1)], [DX_CLEAR_DEPEND(doc, 1)], [DX_REQUIRE_PROG([DX_DOT], dot)], [DX_ENV_APPEND(HAVE_DOT, YES) DX_ENV_APPEND(DOT_PATH, [`DX_DIRNAME_EXPR($DX_DOT)`])], [DX_ENV_APPEND(HAVE_DOT, NO)]) # Man pages generation: DX_ARG_ABLE(man, [generate doxygen manual pages], [DX_CHECK_DEPEND(doc, 1)], [DX_CLEAR_DEPEND(doc, 1)], [], [DX_ENV_APPEND(GENERATE_MAN, YES)], [DX_ENV_APPEND(GENERATE_MAN, NO)]) # RTF file generation: DX_ARG_ABLE(rtf, [generate doxygen RTF documentation], [DX_CHECK_DEPEND(doc, 1)], [DX_CLEAR_DEPEND(doc, 1)], [], [DX_ENV_APPEND(GENERATE_RTF, YES)], [DX_ENV_APPEND(GENERATE_RTF, NO)]) # XML file generation: DX_ARG_ABLE(xml, [generate doxygen XML documentation], [DX_CHECK_DEPEND(doc, 1)], [DX_CLEAR_DEPEND(doc, 1)], [], [DX_ENV_APPEND(GENERATE_XML, YES)], [DX_ENV_APPEND(GENERATE_XML, NO)]) # (Compressed) HTML help generation: DX_ARG_ABLE(chm, [generate doxygen compressed HTML help documentation], [DX_CHECK_DEPEND(doc, 1)], [DX_CLEAR_DEPEND(doc, 1)], [DX_REQUIRE_PROG([DX_HHC], hhc)], [DX_ENV_APPEND(HHC_PATH, $DX_HHC) DX_ENV_APPEND(GENERATE_HTML, YES) DX_ENV_APPEND(GENERATE_HTMLHELP, YES)], [DX_ENV_APPEND(GENERATE_HTMLHELP, NO)]) # Seperate CHI file generation. DX_ARG_ABLE(chi, [generate doxygen seperate compressed HTML help index file], [DX_CHECK_DEPEND(chm, 1)], [DX_CLEAR_DEPEND(chm, 1)], [], [DX_ENV_APPEND(GENERATE_CHI, YES)], [DX_ENV_APPEND(GENERATE_CHI, NO)]) # Plain HTML pages generation: DX_ARG_ABLE(html, [generate doxygen plain HTML documentation], [DX_CHECK_DEPEND(doc, 1) DX_CHECK_DEPEND(chm, 0)], [DX_CLEAR_DEPEND(doc, 1) DX_CLEAR_DEPEND(chm, 0)], [], [DX_ENV_APPEND(GENERATE_HTML, YES)], [DX_TEST_FEATURE(chm) || DX_ENV_APPEND(GENERATE_HTML, NO)]) # PostScript file generation: DX_ARG_ABLE(ps, [generate doxygen PostScript documentation], [DX_CHECK_DEPEND(doc, 1)], [DX_CLEAR_DEPEND(doc, 1)], [DX_REQUIRE_PROG([DX_LATEX], latex) DX_REQUIRE_PROG([DX_MAKEINDEX], makeindex) DX_REQUIRE_PROG([DX_DVIPS], dvips) DX_REQUIRE_PROG([DX_EGREP], egrep)]) # PDF file generation: DX_ARG_ABLE(pdf, [generate doxygen PDF documentation], [DX_CHECK_DEPEND(doc, 1)], [DX_CLEAR_DEPEND(doc, 1)], [DX_REQUIRE_PROG([DX_PDFLATEX], pdflatex) DX_REQUIRE_PROG([DX_MAKEINDEX], makeindex) DX_REQUIRE_PROG([DX_EGREP], egrep)]) # LaTeX generation for PS and/or PDF: AM_CONDITIONAL(DX_COND_latex, DX_TEST_FEATURE(ps) || DX_TEST_FEATURE(pdf)) if DX_TEST_FEATURE(ps) || DX_TEST_FEATURE(pdf); then DX_ENV_APPEND(GENERATE_LATEX, YES) else DX_ENV_APPEND(GENERATE_LATEX, NO) fi # Paper size for PS and/or PDF: AC_ARG_VAR(DOXYGEN_PAPER_SIZE, [a4wide (default), a4, letter, legal or executive]) case "$DOXYGEN_PAPER_SIZE" in #( "") AC_SUBST(DOXYGEN_PAPER_SIZE, "") ;; #( a4wide|a4|letter|legal|executive) DX_ENV_APPEND(PAPER_SIZE, $DOXYGEN_PAPER_SIZE) ;; #( *) AC_MSG_ERROR([unknown DOXYGEN_PAPER_SIZE='$DOXYGEN_PAPER_SIZE']) ;; esac #For debugging: #echo DX_FLAG_doc=$DX_FLAG_doc #echo DX_FLAG_dot=$DX_FLAG_dot #echo DX_FLAG_man=$DX_FLAG_man #echo DX_FLAG_html=$DX_FLAG_html #echo DX_FLAG_chm=$DX_FLAG_chm #echo DX_FLAG_chi=$DX_FLAG_chi #echo DX_FLAG_rtf=$DX_FLAG_rtf #echo DX_FLAG_xml=$DX_FLAG_xml #echo DX_FLAG_pdf=$DX_FLAG_pdf #echo DX_FLAG_ps=$DX_FLAG_ps #echo DX_ENV=$DX_ENV ]) libcypher-parser-0.6.2/build-aux/m4/ax_pthread.m4000066400000000000000000000331471345157344400216070ustar00rootroot00000000000000# =========================================================================== # http://www.gnu.org/software/autoconf-archive/ax_pthread.html # =========================================================================== # # SYNOPSIS # # AX_PTHREAD([ACTION-IF-FOUND[, ACTION-IF-NOT-FOUND]]) # # DESCRIPTION # # This macro figures out how to build C programs using POSIX threads. It # sets the PTHREAD_LIBS output variable to the threads library and linker # flags, and the PTHREAD_CFLAGS output variable to any special C compiler # flags that are needed. (The user can also force certain compiler # flags/libs to be tested by setting these environment variables.) # # Also sets PTHREAD_CC to any special C compiler that is needed for # multi-threaded programs (defaults to the value of CC otherwise). (This # is necessary on AIX to use the special cc_r compiler alias.) # # NOTE: You are assumed to not only compile your program with these flags, # but also link it with them as well. e.g. you should link with # $PTHREAD_CC $CFLAGS $PTHREAD_CFLAGS $LDFLAGS ... $PTHREAD_LIBS $LIBS # # If you are only building threads programs, you may wish to use these # variables in your default LIBS, CFLAGS, and CC: # # LIBS="$PTHREAD_LIBS $LIBS" # CFLAGS="$CFLAGS $PTHREAD_CFLAGS" # CC="$PTHREAD_CC" # # In addition, if the PTHREAD_CREATE_JOINABLE thread-attribute constant # has a nonstandard name, defines PTHREAD_CREATE_JOINABLE to that name # (e.g. PTHREAD_CREATE_UNDETACHED on AIX). # # Also HAVE_PTHREAD_PRIO_INHERIT is defined if pthread is found and the # PTHREAD_PRIO_INHERIT symbol is defined when compiling with # PTHREAD_CFLAGS. # # ACTION-IF-FOUND is a list of shell commands to run if a threads library # is found, and ACTION-IF-NOT-FOUND is a list of commands to run it if it # is not found. If ACTION-IF-FOUND is not specified, the default action # will define HAVE_PTHREAD. # # Please let the authors know if this macro fails on any platform, or if # you have any other suggestions or comments. This macro was based on work # by SGJ on autoconf scripts for FFTW (http://www.fftw.org/) (with help # from M. Frigo), as well as ac_pthread and hb_pthread macros posted by # Alejandro Forero Cuervo to the autoconf macro repository. We are also # grateful for the helpful feedback of numerous users. # # Updated for Autoconf 2.68 by Daniel Richard G. # # LICENSE # # Copyright (c) 2008 Steven G. Johnson # Copyright (c) 2011 Daniel Richard G. # # This program is free software: you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by the # Free Software Foundation, either version 3 of the License, or (at your # option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General # Public License for more details. # # You should have received a copy of the GNU General Public License along # with this program. If not, see . # # As a special exception, the respective Autoconf Macro's copyright owner # gives unlimited permission to copy, distribute and modify the configure # scripts that are the output of Autoconf when processing the Macro. You # need not follow the terms of the GNU General Public License when using # or distributing such scripts, even though portions of the text of the # Macro appear in them. The GNU General Public License (GPL) does govern # all other use of the material that constitutes the Autoconf Macro. # # This special exception to the GPL applies to versions of the Autoconf # Macro released by the Autoconf Archive. When you make and distribute a # modified version of the Autoconf Macro, you may extend this special # exception to the GPL to apply to your modified version as well. #serial 21 AU_ALIAS([ACX_PTHREAD], [AX_PTHREAD]) AC_DEFUN([AX_PTHREAD], [ AC_REQUIRE([AC_CANONICAL_HOST]) AC_LANG_PUSH([C]) ax_pthread_ok=no # We used to check for pthread.h first, but this fails if pthread.h # requires special compiler flags (e.g. on True64 or Sequent). # It gets checked for in the link test anyway. # First of all, check if the user has set any of the PTHREAD_LIBS, # etcetera environment variables, and if threads linking works using # them: if test x"$PTHREAD_LIBS$PTHREAD_CFLAGS" != x; then save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS $PTHREAD_CFLAGS" save_LIBS="$LIBS" LIBS="$PTHREAD_LIBS $LIBS" AC_MSG_CHECKING([for pthread_join in LIBS=$PTHREAD_LIBS with CFLAGS=$PTHREAD_CFLAGS]) AC_TRY_LINK_FUNC([pthread_join], [ax_pthread_ok=yes]) AC_MSG_RESULT([$ax_pthread_ok]) if test x"$ax_pthread_ok" = xno; then PTHREAD_LIBS="" PTHREAD_CFLAGS="" fi LIBS="$save_LIBS" CFLAGS="$save_CFLAGS" fi # We must check for the threads library under a number of different # names; the ordering is very important because some systems # (e.g. DEC) have both -lpthread and -lpthreads, where one of the # libraries is broken (non-POSIX). # Create a list of thread flags to try. Items starting with a "-" are # C compiler flags, and other items are library names, except for "none" # which indicates that we try without any flags at all, and "pthread-config" # which is a program returning the flags for the Pth emulation library. ax_pthread_flags="pthreads none -Kthread -kthread lthread -pthread -pthreads -mthreads pthread --thread-safe -mt pthread-config" # The ordering *is* (sometimes) important. Some notes on the # individual items follow: # pthreads: AIX (must check this before -lpthread) # none: in case threads are in libc; should be tried before -Kthread and # other compiler flags to prevent continual compiler warnings # -Kthread: Sequent (threads in libc, but -Kthread needed for pthread.h) # -kthread: FreeBSD kernel threads (preferred to -pthread since SMP-able) # lthread: LinuxThreads port on FreeBSD (also preferred to -pthread) # -pthread: Linux/gcc (kernel threads), BSD/gcc (userland threads) # -pthreads: Solaris/gcc # -mthreads: Mingw32/gcc, Lynx/gcc # -mt: Sun Workshop C (may only link SunOS threads [-lthread], but it # doesn't hurt to check since this sometimes defines pthreads too; # also defines -D_REENTRANT) # ... -mt is also the pthreads flag for HP/aCC # pthread: Linux, etcetera # --thread-safe: KAI C++ # pthread-config: use pthread-config program (for GNU Pth library) case ${host_os} in solaris*) # On Solaris (at least, for some versions), libc contains stubbed # (non-functional) versions of the pthreads routines, so link-based # tests will erroneously succeed. (We need to link with -pthreads/-mt/ # -lpthread.) (The stubs are missing pthread_cleanup_push, or rather # a function called by this macro, so we could check for that, but # who knows whether they'll stub that too in a future libc.) So, # we'll just look for -pthreads and -lpthread first: ax_pthread_flags="-pthreads pthread -mt -pthread $ax_pthread_flags" ;; darwin*) ax_pthread_flags="-pthread $ax_pthread_flags" ;; esac # Clang doesn't consider unrecognized options an error unless we specify # -Werror. We throw in some extra Clang-specific options to ensure that # this doesn't happen for GCC, which also accepts -Werror. AC_MSG_CHECKING([if compiler needs -Werror to reject unknown flags]) save_CFLAGS="$CFLAGS" ax_pthread_extra_flags="-Werror" CFLAGS="$CFLAGS $ax_pthread_extra_flags -Wunknown-warning-option -Wsizeof-array-argument" AC_COMPILE_IFELSE([AC_LANG_PROGRAM([int foo(void);],[foo()])], [AC_MSG_RESULT([yes])], [ax_pthread_extra_flags= AC_MSG_RESULT([no])]) CFLAGS="$save_CFLAGS" if test x"$ax_pthread_ok" = xno; then for flag in $ax_pthread_flags; do case $flag in none) AC_MSG_CHECKING([whether pthreads work without any flags]) ;; -*) AC_MSG_CHECKING([whether pthreads work with $flag]) PTHREAD_CFLAGS="$flag" ;; pthread-config) AC_CHECK_PROG([ax_pthread_config], [pthread-config], [yes], [no]) if test x"$ax_pthread_config" = xno; then continue; fi PTHREAD_CFLAGS="`pthread-config --cflags`" PTHREAD_LIBS="`pthread-config --ldflags` `pthread-config --libs`" ;; *) AC_MSG_CHECKING([for the pthreads library -l$flag]) PTHREAD_LIBS="-l$flag" ;; esac save_LIBS="$LIBS" save_CFLAGS="$CFLAGS" LIBS="$PTHREAD_LIBS $LIBS" CFLAGS="$CFLAGS $PTHREAD_CFLAGS $ax_pthread_extra_flags" # Check for various functions. We must include pthread.h, # since some functions may be macros. (On the Sequent, we # need a special flag -Kthread to make this header compile.) # We check for pthread_join because it is in -lpthread on IRIX # while pthread_create is in libc. We check for pthread_attr_init # due to DEC craziness with -lpthreads. We check for # pthread_cleanup_push because it is one of the few pthread # functions on Solaris that doesn't have a non-functional libc stub. # We try pthread_create on general principles. AC_COMPILE_IFELSE([AC_LANG_PROGRAM([#include static void routine(void *a) { a = 0; } static void *start_routine(void *a) { return a; }], [pthread_t th; pthread_attr_t attr; pthread_create(&th, 0, start_routine, 0); pthread_join(th, 0); pthread_attr_init(&attr); pthread_cleanup_push(routine, 0); pthread_cleanup_pop(0) /* ; */])], [ AS_IF([$CC -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$OBJEXT $LIBS >/dev/null 2>&1],[ax_pthread_ok=yes]) rm -f conftest ], []) LIBS="$save_LIBS" CFLAGS="$save_CFLAGS" AC_MSG_RESULT([$ax_pthread_ok]) if test "x$ax_pthread_ok" = xyes; then break; fi PTHREAD_LIBS="" PTHREAD_CFLAGS="" done fi # Various other checks: if test "x$ax_pthread_ok" = xyes; then save_LIBS="$LIBS" LIBS="$PTHREAD_LIBS $LIBS" save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS $PTHREAD_CFLAGS" # Detect AIX lossage: JOINABLE attribute is called UNDETACHED. AC_MSG_CHECKING([for joinable pthread attribute]) attr_name=unknown for attr in PTHREAD_CREATE_JOINABLE PTHREAD_CREATE_UNDETACHED; do AC_LINK_IFELSE([AC_LANG_PROGRAM([#include ], [int attr = $attr; return attr /* ; */])], [attr_name=$attr; break], []) done AC_MSG_RESULT([$attr_name]) if test "$attr_name" != PTHREAD_CREATE_JOINABLE; then AC_DEFINE_UNQUOTED([PTHREAD_CREATE_JOINABLE], [$attr_name], [Define to necessary symbol if this constant uses a non-standard name on your system.]) fi AC_MSG_CHECKING([if more special flags are required for pthreads]) flag=no case ${host_os} in aix* | freebsd* | darwin*) flag="-D_THREAD_SAFE";; osf* | hpux*) flag="-D_REENTRANT";; solaris*) if test "$GCC" = "yes"; then flag="-D_REENTRANT" else # TODO: What about Clang on Solaris? flag="-mt -D_REENTRANT" fi ;; esac AC_MSG_RESULT([$flag]) if test "x$flag" != xno; then PTHREAD_CFLAGS="$flag $PTHREAD_CFLAGS" fi AC_CACHE_CHECK([for PTHREAD_PRIO_INHERIT], [ax_cv_PTHREAD_PRIO_INHERIT], [ AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include ]], [[int i = PTHREAD_PRIO_INHERIT;]])], [ax_cv_PTHREAD_PRIO_INHERIT=yes], [ax_cv_PTHREAD_PRIO_INHERIT=no]) ]) AS_IF([test "x$ax_cv_PTHREAD_PRIO_INHERIT" = "xyes"], [AC_DEFINE([HAVE_PTHREAD_PRIO_INHERIT], [1], [Have PTHREAD_PRIO_INHERIT.])]) LIBS="$save_LIBS" CFLAGS="$save_CFLAGS" # More AIX lossage: compile with *_r variant if test "x$GCC" != xyes; then case $host_os in aix*) AS_CASE(["x/$CC"], [x*/c89|x*/c89_128|x*/c99|x*/c99_128|x*/cc|x*/cc128|x*/xlc|x*/xlc_v6|x*/xlc128|x*/xlc128_v6], [#handle absolute path differently from PATH based program lookup AS_CASE(["x$CC"], [x/*], [AS_IF([AS_EXECUTABLE_P([${CC}_r])],[PTHREAD_CC="${CC}_r"])], [AC_CHECK_PROGS([PTHREAD_CC],[${CC}_r],[$CC])])]) ;; esac fi fi test -n "$PTHREAD_CC" || PTHREAD_CC="$CC" AC_SUBST([PTHREAD_LIBS]) AC_SUBST([PTHREAD_CFLAGS]) AC_SUBST([PTHREAD_CC]) # Finally, execute ACTION-IF-FOUND/ACTION-IF-NOT-FOUND: if test x"$ax_pthread_ok" = xyes; then ifelse([$1],,[AC_DEFINE([HAVE_PTHREAD],[1],[Define if you have POSIX threads libraries and header files.])],[$1]) : else ax_pthread_ok=no $2 fi AC_LANG_POP ])dnl AX_PTHREAD libcypher-parser-0.6.2/build-aux/m4/ax_thread_local.m4000066400000000000000000000057541345157344400226040ustar00rootroot00000000000000# =========================================================================== # http://www.gnu.org/software/autoconf-archive/ax_tls.html # =========================================================================== # # SYNOPSIS # # AX_THREAD_LOCAL([action-if-found], [action-if-not-found]) # # DESCRIPTION # # Provides a test for the compiler support of thread local storage # extensions. Defines THREAD_LOCAL if it is found. Currently knows about # GCC/ICC and MSVC. I think SunPro uses the same as GCC, and Borland # apparently supports either. # # LICENSE # # Copyright (c) 2008 Alan Woodland # Copyright (c) 2010 Diego Elio Petteno` # # This program is free software: you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by the # Free Software Foundation, either version 3 of the License, or (at your # option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General # Public License for more details. # # You should have received a copy of the GNU General Public License along # with this program. If not, see . # # As a special exception, the respective Autoconf Macro's copyright owner # gives unlimited permission to copy, distribute and modify the configure # scripts that are the output of Autoconf when processing the Macro. You # need not follow the terms of the GNU General Public License when using # or distributing such scripts, even though portions of the text of the # Macro appear in them. The GNU General Public License (GPL) does govern # all other use of the material that constitutes the Autoconf Macro. # # This special exception to the GPL applies to versions of the Autoconf # Macro released by the Autoconf Archive. When you make and distribute a # modified version of the Autoconf Macro, you may extend this special # exception to the GPL to apply to your modified version as well. #serial 11 AC_DEFUN([AX_THREAD_LOCAL], [ AC_MSG_CHECKING([for thread local storage class]) AC_CACHE_VAL([ac_cv_tls], [for ax_tls_keyword in __thread '__declspec(thread)' none; do AS_CASE([$ax_tls_keyword], [none], [ac_cv_tls=none ; break], [AC_TRY_COMPILE( [#include static void foo(void) { static ] $ax_tls_keyword [ int bar; exit(1); }], [], [ac_cv_tls=$ax_tls_keyword ; break], ac_cv_tls=none )]) done ]) AC_MSG_RESULT([$ac_cv_tls]) AS_IF([test "$ac_cv_tls" != "none"], [AC_DEFINE_UNQUOTED([THREAD_LOCAL],[$ac_cv_tls],[If the compiler supports a thread local storage class define it to that here]) m4_ifnblank([$1],[$1])], [m4_ifnblank([$2],[$2]) : ]) ]) libcypher-parser-0.6.2/build-aux/m4/declare_versions.m4000066400000000000000000000025171345157344400230140ustar00rootroot00000000000000AC_DEFUN([DECLARE_VERSIONS], [ if ! echo $VERSION | grep -Eq '^[[0-9]]+\.[[0-9]]+\.[[0-9]](~[[a-zA-Z0-9_]]+)?$'; then AC_MSG_ERROR([[Invalid version "$VERSION" specified in configure.ac. Must follow ..[~] format.]]) fi PACKAGE_MAJOR_VERSION=$(echo $VERSION | awk -F. '{print $[1]}') AC_DEFINE_UNQUOTED([PACKAGE_MAJOR_VERSION], $PACKAGE_MAJOR_VERSION, [Define to the major version of this package]) AC_SUBST([PACKAGE_MAJOR_VERSION]) PACKAGE_MINOR_VERSION=$(echo $VERSION | awk -F. '{print $[2]}') AC_DEFINE_UNQUOTED([PACKAGE_MINOR_VERSION], $PACKAGE_MINOR_VERSION, [Define to the minor version of this package]) AC_SUBST([PACKAGE_MINOR_VERSION]) PACKAGE_PATCH_VERSION=$(echo $VERSION | awk -F'[[.~]]' '{print $[3]}') AC_DEFINE_UNQUOTED([PACKAGE_PATCH_VERSION], $PACKAGE_PATCH_VERSION, [Define to the patch version of this package]) AC_SUBST([PACKAGE_PATCH_VERSION]) PACKAGE_DEVELOPMENT_VERSION=$(echo $VERSION | awk -F~ '{print $[2]}') AC_DEFINE_UNQUOTED([PACKAGE_DEVELOPMENT_VERSION], ["]$PACKAGE_DEVELOPMENT_VERSION["], [Define to the development version of this package]) AC_SUBST([PACKAGE_DEVELOPMENT_VERSION]) if test "X$PACKAGE_DEVELOPMENT_VERSION" = "X"; then PACKAGE_STATUS_VERSION=0 else PACKAGE_STATUS_VERSION=1 fi AC_SUBST([PACKAGE_STATUS_VERSION]) ]) libcypher-parser-0.6.2/build-aux/m4/pkg.m4000066400000000000000000000125011345157344400202400ustar00rootroot00000000000000# pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*- # serial 1 (pkg-config-0.24) # # Copyright © 2004 Scott James Remnant . # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # PKG_PROG_PKG_CONFIG([MIN-VERSION]) # ---------------------------------- AC_DEFUN([PKG_PROG_PKG_CONFIG], [m4_pattern_forbid([^_?PKG_[A-Z_]+$]) m4_pattern_allow([^PKG_CONFIG(_PATH)?$]) AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility]) AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path]) AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path]) if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then AC_PATH_TOOL([PKG_CONFIG], [pkg-config]) fi if test -n "$PKG_CONFIG"; then _pkg_min_version=m4_default([$1], [0.9.0]) AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version]) if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) PKG_CONFIG="" fi fi[]dnl ])# PKG_PROG_PKG_CONFIG # PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) # # Check to see whether a particular set of modules exists. Similar # to PKG_CHECK_MODULES(), but does not set variables or print errors. # # Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG]) # only at the first occurence in configure.ac, so if the first place # it's called might be skipped (such as if it is within an "if", you # have to call PKG_CHECK_EXISTS manually # -------------------------------------------------------------- AC_DEFUN([PKG_CHECK_EXISTS], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl if test -n "$PKG_CONFIG" && \ AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then m4_default([$2], [:]) m4_ifvaln([$3], [else $3])dnl fi]) # _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES]) # --------------------------------------------- m4_define([_PKG_CONFIG], [if test -n "$$1"; then pkg_cv_[]$1="$$1" elif test -n "$PKG_CONFIG"; then PKG_CHECK_EXISTS([$3], [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`], [pkg_failed=yes]) else pkg_failed=untried fi[]dnl ])# _PKG_CONFIG # _PKG_SHORT_ERRORS_SUPPORTED # ----------------------------- AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED], [AC_REQUIRE([PKG_PROG_PKG_CONFIG]) if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then _pkg_short_errors_supported=yes else _pkg_short_errors_supported=no fi[]dnl ])# _PKG_SHORT_ERRORS_SUPPORTED # PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], # [ACTION-IF-NOT-FOUND]) # # # Note that if there is a possibility the first call to # PKG_CHECK_MODULES might not happen, you should be sure to include an # explicit call to PKG_PROG_PKG_CONFIG in your configure.ac # # # -------------------------------------------------------------- AC_DEFUN([PKG_CHECK_MODULES], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl pkg_failed=no AC_MSG_CHECKING([for $1]) _PKG_CONFIG([$1][_CFLAGS], [cflags], [$2]) _PKG_CONFIG([$1][_LIBS], [libs], [$2]) m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS and $1[]_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details.]) if test $pkg_failed = yes; then AC_MSG_RESULT([no]) _PKG_SHORT_ERRORS_SUPPORTED if test $_pkg_short_errors_supported = yes; then $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "$2" 2>&1` else $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors "$2" 2>&1` fi # Put the nasty error message in config.log where it belongs echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD m4_default([$4], [AC_MSG_ERROR( [Package requirements ($2) were not met: $$1_PKG_ERRORS Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. _PKG_TEXT])dnl ]) elif test $pkg_failed = untried; then AC_MSG_RESULT([no]) m4_default([$4], [AC_MSG_FAILURE( [The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. _PKG_TEXT To get pkg-config, see .])dnl ]) else $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS $1[]_LIBS=$pkg_cv_[]$1[]_LIBS AC_MSG_RESULT([yes]) $3 fi[]dnl ])# PKG_CHECK_MODULES libcypher-parser-0.6.2/build-aux/m4/prog_cc_c11.m4000066400000000000000000000011761345157344400215450ustar00rootroot00000000000000AC_DEFUN([PROG_CC_C11], [AC_CACHE_CHECK([for the _AC_LANG option to accept ISO C11], [neo4j_cv_prog_cc_c11], [ neo4j_save_flags=$[]_AC_LANG_PREFIX[]FLAGS _AC_LANG_PREFIX[]FLAGS="$neo4j_save_flags -std=gnu11" AC_COMPILE_IFELSE([AC_LANG_PROGRAM()], [neo4j_cv_prog_cc_c11="-std=gnu11"], [ _AC_LANG_PREFIX[]FLAGS="$neo4j_save_flags -std=c11" AC_COMPILE_IFELSE([AC_LANG_PROGRAM()], [neo4j_cv_prog_cc_c11="-std=c11"], [neo4j_cv_prog_cc_c11="none found"])]) _AC_LANG_PREFIX[]FLAGS=$neo4j_save_flags]) if test "X$neo4j_cv_prog_cc_c11" != "Xnone found"; then CFLAGS="$CFLAGS $neo4j_cv_prog_cc_c11" fi ]) libcypher-parser-0.6.2/build-aux/m4/static_assert.m4000066400000000000000000000007411345157344400223320ustar00rootroot00000000000000AC_DEFUN([STATIC_ASSERT], [AC_CACHE_CHECK([for static_assert], [neo4j_cv_macro_static_assert], [AC_COMPILE_IFELSE( [AC_LANG_PROGRAM([[ #include static_assert(1, "impossible"); ]],[[return 0;]])], [neo4j_cv_macro_static_assert=yes], [neo4j_cv_macro_static_assert=no])]) if test "X$neo4j_cv_macro_static_assert" = "Xno"; then AC_DEFINE([static_assert(c,m)],[typedef void _no_static_assert], [Substitute for static_assert]) fi ]) libcypher-parser-0.6.2/build-aux/m4/with_libs.m4000066400000000000000000000011121345157344400214370ustar00rootroot00000000000000AC_DEFUN([WITH_LIBS], [AC_ARG_WITH([libs], [AC_HELP_STRING( [[--with-libs=DIR[:DIR]]], [look for libraries installed in DIR/{bin,lib,include}])], [neo4j_save_ifs=$IFS IFS=: for dir in $with_libs; do if ! test -d "$dir"; then IFS=$neo4j_save_ifs AC_MSG_ERROR([lib directory "$dir": not found]) fi CPPFLAGS="-I${dir}/include $CPPFLAGS" LDFLAGS="-L${dir}/lib $LDFLAGS" PATH="${dir}/bin:$PATH" echo "SET path to $PATH" PKG_CONFIG_PATH="${PKG_CONFIG_PATH}${PKG_CONFIG_PATH:+:}${dir}/lib/pkgconfig" done IFS=$neo4j_save_ifs ]) ]) libcypher-parser-0.6.2/build-aux/release.sh000077500000000000000000000073171345157344400206650ustar00rootroot00000000000000#!/bin/bash # vi:ts=2 sw=2 et: set -eu if ! [ -d .git ]; then echo "Must be run from the project root" >&2 exit 1 fi if [ `git symbolic-ref HEAD` != 'refs/heads/master' ]; then echo "Must be run on the master branch" >&2 exit 1 fi status=`git status --porcelain` if [ -n "$status" ]; then echo "Working directory is not clean" >&2 exit 1 fi ac_init=`grep -E 'AC_INIT\(\[[_a-zA-Z-]*\],\[[0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*~devel\]\)$' configure.ac` if [ `echo $ac_init | wc -l` != 1 ]; then echo "Unrecognized or multiple AC_INIT entries in configure.ac" >&2 exit 1 fi PACKAGE=`echo $ac_init | sed -e 's/^.*AC_INIT(\[\(.*\)\],.*$/\1/'` VERSION=`echo $ac_init | sed -e 's/^.*\[\(.*\)~devel\])$/\1/'` TARBALL="$PACKAGE-$VERSION.tar.gz" echo "Cleaning working tree" git clean -fdxq echo "Removing ~devel suffix from version in configure.ac" sed -i '' -e "s/\(AC_INIT(.*\)~devel\(\])\)/\1\2/" configure.ac version_info=`grep -e '-version-info [0-9][0-9]*:[0-9][0-9]*:[0-9][0-9]*$' lib/src/Makefile.am | sed -e 's/^.*-version-info //'` version_current=`echo $version_info | awk -F: '{ print $1 }'` version_revision=`echo $version_info | awk -F: '{ print $2 }'` version_age=`echo $version_info | awk -F: '{ print $3 }'` echo echo "Current version-info: $version_info" echo while true; do read -p "Has the library library source code has changed at all since the last update? [y/n]" yn case $yn in [Nn]*) break;; [Yy]*) version_revision=`expr $version_revision + 1` while true; do read -p "Have any interfaces been added, removed, or changed since the last update? [y/n]" yn case $yn in [Nn]*) break;; [Yy]*) version_current=`expr $version_current + 1` version_revision=0 while true; do read -p "Have any interfaces been added since the last public release? [y/n]" yn case $yn in [Nn]*) break;; [Yy]*) version_age=`expr $version_age + 1`; break;; *) esac done while true; do read -p "Have any interfaces been removed or changed since the last public release? [y/n]" yn case $yn in [Nn]*) break;; [Yy]*) version_age=0; break;; *) esac done break;; *) esac done break;; *) esac done echo "Updating version-info in lib/src/Makefile.am" sed -i '' -e "s/-version-info $version_info$/-version-info $version_current:$version_revision:$version_age/" lib/src/Makefile.am echo echo "Version changes:" git diff echo while true; do read -p "Commit? [y/n]" yn case $yn in [Nn]*) exit;; [Yy]*) break;; *) esac done git commit -a -m "Bump version" git tag -s -m "Release $VERSION" v$VERSION echo echo "Building distribution" ./autogen.sh ./configure make dist echo echo "Signing distribution tarball" gpg --armour --detach-sig "$TARBALL" echo echo "Building debian docker image" debian_docker=`docker build . -q -f build-aux/build-debian.dockerfile` echo "Built image $debian_docker" git checkout debian git clean -fd -e "$TARBALL*" echo echo "Switching to debian branch and importing distribution tarball" docker run --rm -v `pwd`:/home/build/dist -w /home/build/dist -i $debian_docker /bin/sh -s <&2 exit 1 fi echo "Building..." set -x tar xzf $1 cd $2 ./configure --enable-silent-rules --disable-maintainer-mode --disable-dependency-tracking --disable-debug (cd lib/src && make all) (cd lib/test && make check_libcypher-parser) CK_FORK=no valgrind --leak-check=full --show-leak-kinds=all ./lib/test/check_libcypher-parser libcypher-parser-0.6.2/configure.ac000066400000000000000000000073071345157344400173010ustar00rootroot00000000000000# Copyright 2016, Chris Leishman (http://github.com/cleishm) # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. # dnl Process this file with autoconf to produce a configure script AC_PREREQ([2.69]) AC_INIT([libcypher-parser],[0.6.2]) AC_CONFIG_SRCDIR([lib/src/cypher-parser.h.in]) AC_CONFIG_AUX_DIR([build-aux]) AC_CONFIG_MACRO_DIR([build-aux/m4]) AM_INIT_AUTOMAKE([foreign]) AC_CONFIG_HEADER([config.h]) AM_MAINTAINER_MODE([enable]) DECLARE_VERSIONS WITH_LIBS GCC_CFLAGS="-fvisibility=hidden -pipe -Wall -W -Wno-unused-parameter \ -Wno-missing-field-initializers -Wpointer-arith -Wstrict-prototypes \ -Wcast-qual -Wcast-align -Wno-error=unused-function \ -Wno-error=unused-variable -Wno-error=deprecated-declarations" AC_ARG_ENABLE([werror], AS_HELP_STRING([--disable-werror], [Do not make warnings into errors even if the compiler supports -Werror.]), [werror_flag=$enableval], [werror_flag=yes]) AS_IF([test "X$werror_flag" = "Xyes"], [GCC_CFLAGS="$GCC_CFLAGS -Werror"]) LT_INIT AC_LANG([C]) AC_PROG_CC PROG_CC_C11 AC_PROG_CPP AC_PROG_INSTALL AC_PROG_LN_S AC_PROG_MAKE_SET AC_ARG_VAR([LEG], [leg parser generator command]) AC_CHECK_PROG([LEG], [leg], [leg]) AM_CONDITIONAL([HAVE_LEG], [test -n "$LEG"]) AS_IF([test -n "$LEG" -o -f ./lib/src/parser_leg.c], [], [AC_MSG_ERROR([leg is required: please install http://piumarta.com/software/peg/])]) AC_C_CONST AC_C_INLINE AC_C_VARARRAYS AS_IF([test "X$ac_cv_c_vararrays" != "Xyes"], [AC_MSG_ERROR([compiler support for variable-length arrays is required])]) AC_HEADER_ASSERT AC_HEADER_STDC AC_HEADER_STDBOOL AC_CHECK_HEADERS([endian.h sys/endian.h libkern/OSByteOrder.h]) AC_TYPE_SIZE_T AC_TYPE_SSIZE_T AC_FUNC_STRERROR_R STATIC_ASSERT LT_LIB_M AC_CHECK_FUNCS([open_memstream],[],[], [ #include ]) AX_THREAD_LOCAL() AX_PTHREAD([has_pthreads=yes]) AS_IF([test "X$has_pthreads" = "Xyes"], [AC_DEFINE([HAVE_PTHREADS], [1], [Define to 1 if you have pthreads.])]) dnl Check for check test support PKG_CHECK_MODULES([CHECK], [check >= 0.9.4], [has_check=yes], [has_check=no]) AM_CONDITIONAL([HAVE_CHECK], [test "X$has_check" = "Xyes"]) dnl Check if command line tools should be built AC_ARG_ENABLE([tools], AS_HELP_STRING([--disable-tools], [Do not build command line tools])) AM_CONDITIONAL([WANT_TOOLS], [test "X$enable_tools" != "Xno"]) dnl Check if assertions should be disabled AC_ARG_ENABLE([debug], AS_HELP_STRING([--disable-debug], [Disable debug])) AS_IF([test "X$enable_debug" = "Xno"], [AC_DEFINE([NDEBUG], [1], [Define to 1 to disable assertions.])]) dnl Add GCC flags AS_IF([test "X$GCC" = "Xyes"], [CFLAGS="$CFLAGS $GCC_CFLAGS"]) dnl Capture required dependencies for pkg-check AC_SUBST([REQUIRES], [`echo "$REQUIRES" | cut -c3-`]) dnl Check for doxygen support DX_HTML_FEATURE(ON) DX_CHM_FEATURE(OFF) DX_CHI_FEATURE(OFF) DX_MAN_FEATURE(ON) DX_RTF_FEATURE(OFF) DX_XML_FEATURE(OFF) DX_PDF_FEATURE(ON) DX_PS_FEATURE(OFF) DX_INIT_DOXYGEN(libcypher-parser, doxygen.cfg, .) AC_CONFIG_FILES([ Makefile \ lib/Makefile \ lib/cypher-parser.pc \ lib/doc/Makefile \ lib/src/Makefile \ lib/src/cypher-parser.h \ lib/test/Makefile \ linter/Makefile \ linter/doc/Makefile \ linter/doc/cypher-lint.1 \ linter/src/Makefile ]) AC_OUTPUT libcypher-parser-0.6.2/lib/000077500000000000000000000000001345157344400155525ustar00rootroot00000000000000libcypher-parser-0.6.2/lib/Makefile.am000066400000000000000000000001751345157344400176110ustar00rootroot00000000000000SUBDIRS = src doc if HAVE_CHECK SUBDIRS += test endif pkgconfigdir = $(libdir)/pkgconfig pkgconfig_DATA = cypher-parser.pc libcypher-parser-0.6.2/lib/cypher-parser.pc.in000066400000000000000000000004741345157344400212740ustar00rootroot00000000000000prefix=@prefix@ exec_prefix=@exec_prefix@ libdir=@libdir@ includedir=@includedir@ Name: Cypher Parser Description: A parser library for Cypher, the graph query language URL: http://github.com/cleishm/libcypher-parser Version: @VERSION@ Requires: @REQUIRES@ Libs: -L${libdir} -lcypher-parser Cflags: -I${includedir} libcypher-parser-0.6.2/lib/doc/000077500000000000000000000000001345157344400163175ustar00rootroot00000000000000libcypher-parser-0.6.2/lib/doc/Makefile.am000066400000000000000000000005141345157344400203530ustar00rootroot00000000000000include $(top_srcdir)/build-aux/automake/doxygen.am if DX_COND_doc all-local: $(MAKE) doxygen-doc endif libcypher-parser.tag: .deps/cypher-parser.h .deps/cypher-parser.h: ../src/cypher-parser.h @mkdir -p .deps (cat "$<" && sed -ne "s/^.*@fn \(.*\)$$/\1;/p" < "$<") >> "$@" EXTRA_DIST = doxygen.cfg clean-local: rm -rf .deps libcypher-parser-0.6.2/lib/doc/doxygen.cfg000066400000000000000000003064321345157344400204650ustar00rootroot00000000000000# Doxyfile 1.8.10 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. # # All text after a double hash (##) is considered a comment and is placed in # front of the TAG it is preceding. # # All text after a single hash (#) is considered a comment and will be ignored. # The format is: # TAG = value [value, ...] # For lists, items can also be appended using: # TAG += value [value, ...] # Values that contain spaces should be placed between quotes (\" \"). #--------------------------------------------------------------------------- # Project related configuration options #--------------------------------------------------------------------------- # This tag specifies the encoding used for all characters in the config file # that follow. The default is UTF-8 which is also the encoding used for all text # before the first occurrence of this tag. Doxygen uses libiconv (or the iconv # built into libc) for the transcoding. See http://www.gnu.org/software/libiconv # for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 # The PROJECT_NAME tag is a single word (or a sequence of words surrounded by # double-quotes, unless you are using Doxywizard) that should identify the # project for which the documentation is generated. This name is used in the # title of most generated pages and in a few other places. # The default value is: My Project. PROJECT_NAME = $(PROJECT)-$(VERSION) # The PROJECT_NUMBER tag can be used to enter a project or revision number. This # could be handy for archiving the generated documentation or if some version # control system is used. PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer a # quick idea about the purpose of the project. Keep the description short. PROJECT_BRIEF = # With the PROJECT_LOGO tag one can specify a logo or an icon that is included # in the documentation. The maximum height of the logo should not exceed 55 # pixels and the maximum width should not exceed 200 pixels. Doxygen will copy # the logo to the output directory. PROJECT_LOGO = # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path # into which the generated documentation will be written. If a relative path is # entered, it will be relative to the location where doxygen was started. If # left blank the current directory will be used. OUTPUT_DIRECTORY = $(DOCDIR) # If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub- # directories (in 2 levels) under the output directory of each output format and # will distribute the generated files over these directories. Enabling this # option can be useful when feeding doxygen a huge amount of source files, where # putting all generated files in the same directory would otherwise causes # performance problems for the file system. # The default value is: NO. CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. # Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, # Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), # Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, # Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), # Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, # Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, # Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, # Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. # The default value is: YES. BRIEF_MEMBER_DESC = YES # If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief # description of a member or function before the detailed description # # Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the # brief descriptions will be completely suppressed. # The default value is: YES. REPEAT_BRIEF = YES # This tag implements a quasi-intelligent brief description abbreviator that is # used to form the text in various listings. Each string in this list, if found # as the leading text of the brief description, will be stripped from the text # and the result, after processing the whole list, is used as the annotated # text. Otherwise, the brief description is used as-is. If left blank, the # following values are used ($name is automatically replaced with the name of # the entity):The $name class, The $name widget, The $name file, is, provides, # specifies, contains, represents, a, an and the. ABBREVIATE_BRIEF = # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then # doxygen will generate a detailed section even if there is only a brief # description. # The default value is: NO. ALWAYS_DETAILED_SEC = NO # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all # inherited members of a class in the documentation of that class as if those # members were ordinary class members. Constructors, destructors and assignment # operators of the base classes will not be shown. # The default value is: NO. INLINE_INHERITED_MEMB = YES # If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path # before files name in the file list and in the header files. If set to NO the # shortest path that makes the file name unique will be used # The default value is: YES. FULL_PATH_NAMES = YES # The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path. # Stripping is only done if one of the specified strings matches the left-hand # part of the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the path to # strip. # # Note that you can specify absolute paths here, but also relative paths, which # will be relative from the directory where doxygen is started. # This tag requires that the tag FULL_PATH_NAMES is set to YES. STRIP_FROM_PATH = .deps # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the # path mentioned in the documentation of a class, which tells the reader which # header file to include in order to use a class. If left blank only the name of # the header file containing the class definition is used. Otherwise one should # specify the list of include paths that are normally passed to the compiler # using the -I flag. STRIP_FROM_INC_PATH = # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but # less readable) file names. This can be useful is your file systems doesn't # support long names like on DOS, Mac, or CD-ROM. # The default value is: NO. SHORT_NAMES = NO # If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the # first line (until the first dot) of a Javadoc-style comment as the brief # description. If set to NO, the Javadoc-style will behave just like regular Qt- # style comments (thus requiring an explicit @brief command for a brief # description.) # The default value is: NO. JAVADOC_AUTOBRIEF = YES # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus # requiring an explicit \brief command for a brief description.) # The default value is: NO. QT_AUTOBRIEF = NO # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a # multi-line C++ special comment block (i.e. a block of //! or /// comments) as # a brief description. This used to be the default behavior. The new default is # to treat a multi-line C++ comment block as a detailed description. Set this # tag to YES if you prefer the old behavior instead. # # Note that setting this tag to YES also means that rational rose comments are # not recognized any more. # The default value is: NO. MULTILINE_CPP_IS_BRIEF = NO # If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the # documentation from any documented member that it re-implements. # The default value is: YES. INHERIT_DOCS = YES # If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new # page for each member. If set to NO, the documentation of a member will be part # of the file/class/namespace that contains it. # The default value is: NO. SEPARATE_MEMBER_PAGES = NO # The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen # uses this value to replace tabs by spaces in code fragments. # Minimum value: 1, maximum value: 16, default value: 4. TAB_SIZE = 4 # This tag can be used to specify a number of aliases that act as commands in # the documentation. An alias has the form: # name=value # For example adding # "sideeffect=@par Side Effects:\n" # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert # newlines. ALIASES = # This tag can be used to specify a number of word-keyword mappings (TCL only). # A mapping has the form "name=value". For example adding "class=itcl::class" # will allow you to use the command class in the itcl::class meaning. TCL_SUBST = # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources # only. Doxygen will then generate output that is more tailored for C. For # instance, some of the names that are used will be different. The list of all # members will be omitted, etc. # The default value is: NO. OPTIMIZE_OUTPUT_FOR_C = YES # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or # Python sources only. Doxygen will then generate output that is more tailored # for that language. For instance, namespaces will be presented as packages, # qualified scopes will look different, etc. # The default value is: NO. OPTIMIZE_OUTPUT_JAVA = NO # Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran # sources. Doxygen will then generate output that is tailored for Fortran. # The default value is: NO. OPTIMIZE_FOR_FORTRAN = NO # Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL # sources. Doxygen will then generate output that is tailored for VHDL. # The default value is: NO. OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, # C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: # FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: # Fortran. In the later case the parser tries to guess whether the code is fixed # or free formatted code, this is the default for Fortran type files), VHDL. For # instance to make doxygen treat .inc files as Fortran files (default is PHP), # and .f files as C (default is Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # # Note that for custom extensions you also need to set FILE_PATTERNS otherwise # the files are not read by doxygen. EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable # documentation. See http://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. # The default value is: YES. MARKDOWN_SUPPORT = YES # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or # globally by setting AUTOLINK_SUPPORT to NO. # The default value is: YES. AUTOLINK_SUPPORT = YES # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should set this # tag to YES in order to let doxygen match functions declarations and # definitions whose arguments contain STL classes (e.g. func(std::string); # versus func(std::string) {}). This also make the inheritance and collaboration # diagrams that involve STL classes more complete and accurate. # The default value is: NO. BUILTIN_STL_SUPPORT = NO # If you use Microsoft's C++/CLI language, you should set this option to YES to # enable parsing support. # The default value is: NO. CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: # http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. SIP_SUPPORT = NO # For Microsoft's IDL there are propget and propput attributes to indicate # getter and setter methods for a property. Setting this option to YES will make # doxygen to replace the get and set methods by a property in the documentation. # This will only work if the methods are indeed getting or setting a simple # type. If this is not the case, or you want to show the methods anyway, you # should set this option to NO. # The default value is: YES. IDL_PROPERTY_SUPPORT = YES # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC # tag is set to YES then doxygen will reuse the documentation of the first # member in the group (if any) for the other members of the group. By default # all members of a group must be documented explicitly. # The default value is: NO. DISTRIBUTE_GROUP_DOC = NO # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent # subgrouping. Alternatively, this can be done per class using the # \nosubgrouping command. # The default value is: YES. SUBGROUPING = YES # When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions # are shown inside the group in which they are included (e.g. using \ingroup) # instead of on a separate page (for HTML and Man pages) or section (for LaTeX # and RTF). # # Note that this feature does not work in combination with # SEPARATE_MEMBER_PAGES. # The default value is: NO. INLINE_GROUPED_CLASSES = NO # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions # with only public data fields or simple typedef fields will be shown inline in # the documentation of the scope in which they are defined (i.e. file, # namespace, or group documentation), provided this scope is documented. If set # to NO, structs, classes, and unions are shown on a separate page (for HTML and # Man pages) or section (for LaTeX and RTF). # The default value is: NO. INLINE_SIMPLE_STRUCTS = NO # When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or # enum is documented as struct, union, or enum with the name of the typedef. So # typedef struct TypeS {} TypeT, will appear in the documentation as a struct # with name TypeT. When disabled the typedef will appear as a member of a file, # namespace, or class. And the struct will be named TypeS. This can typically be # useful for C code in case the coding convention dictates that all compound # types are typedef'ed and only the typedef is referenced, never the tag name. # The default value is: NO. TYPEDEF_HIDES_STRUCT = YES # The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This # cache is used to resolve symbols given their name and scope. Since this can be # an expensive process and often the same symbol appears multiple times in the # code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small # doxygen will become slower. If the cache is too large, memory is wasted. The # cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range # is 0..9, the default is 0, corresponding to a cache size of 2^16=65536 # symbols. At the end of a run doxygen will report the cache usage and suggest # the optimal cache size from a speed point of view. # Minimum value: 0, maximum value: 9, default value: 0. LOOKUP_CACHE_SIZE = 0 #--------------------------------------------------------------------------- # Build related configuration options #--------------------------------------------------------------------------- # If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in # documentation are documented, even if no documentation was available. Private # class members and static file members will be hidden unless the # EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES. # Note: This will also disable the warnings about undocumented members that are # normally produced when WARNINGS is set to YES. # The default value is: NO. EXTRACT_ALL = NO # If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will # be included in the documentation. # The default value is: NO. EXTRACT_PRIVATE = NO # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. EXTRACT_PACKAGE = NO # If the EXTRACT_STATIC tag is set to YES, all static members of a file will be # included in the documentation. # The default value is: NO. EXTRACT_STATIC = NO # If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined # locally in source files will be included in the documentation. If set to NO, # only classes defined in header files are included. Does not have any effect # for Java sources. # The default value is: YES. EXTRACT_LOCAL_CLASSES = NO # This flag is only useful for Objective-C code. If set to YES, local methods, # which are defined in the implementation section but not in the interface are # included in the documentation. If set to NO, only methods in the interface are # included. # The default value is: NO. EXTRACT_LOCAL_METHODS = NO # If this flag is set to YES, the members of anonymous namespaces will be # extracted and appear in the documentation as a namespace called # 'anonymous_namespace{file}', where file will be replaced with the base name of # the file that contains the anonymous namespace. By default anonymous namespace # are hidden. # The default value is: NO. EXTRACT_ANON_NSPACES = NO # If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all # undocumented members inside documented classes or files. If set to NO these # members will be included in the various overviews, but no documentation # section is generated. This option has no effect if EXTRACT_ALL is enabled. # The default value is: NO. HIDE_UNDOC_MEMBERS = YES # If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all # undocumented classes that are normally visible in the class hierarchy. If set # to NO, these classes will be included in the various overviews. This option # has no effect if EXTRACT_ALL is enabled. # The default value is: NO. HIDE_UNDOC_CLASSES = YES # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend # (class|struct|union) declarations. If set to NO, these declarations will be # included in the documentation. # The default value is: NO. HIDE_FRIEND_COMPOUNDS = NO # If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any # documentation blocks found inside the body of a function. If set to NO, these # blocks will be appended to the function's detailed documentation block. # The default value is: NO. HIDE_IN_BODY_DOCS = NO # The INTERNAL_DOCS tag determines if documentation that is typed after a # \internal command is included. If the tag is set to NO then the documentation # will be excluded. Set it to YES to include the internal documentation. # The default value is: NO. INTERNAL_DOCS = NO # If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows # and Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO # If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with # their full class and namespace scopes in the documentation. If set to YES, the # scope will be hidden. # The default value is: NO. HIDE_SCOPE_NAMES = NO # If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of # the files that are included by a file in the documentation of that file. # The default value is: YES. SHOW_INCLUDE_FILES = YES # If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each # grouped member an include statement to the documentation, telling the reader # which file to include in order to use the member. # The default value is: NO. SHOW_GROUPED_MEMB_INC = NO # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. FORCE_LOCAL_INCLUDES = NO # If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the # documentation for inline members. # The default value is: YES. INLINE_INFO = YES # If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the # (detailed) documentation of file and class members alphabetically by member # name. If set to NO, the members will appear in declaration order. # The default value is: YES. SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member # name. If set to NO, the members will appear in declaration order. Note that # this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO # If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the # (brief and detailed) documentation of class members so that constructors and # destructors are listed first. If set to NO the constructors will appear in the # respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS. # Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief # member documentation. # Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting # detailed member documentation. # The default value is: NO. SORT_MEMBERS_CTORS_1ST = NO # If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy # of group names into alphabetical order. If set to NO the group names will # appear in their defined order. # The default value is: NO. SORT_GROUP_NAMES = NO # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by # fully-qualified names, including namespaces. If set to NO, the class list will # be sorted only by class name, not including the namespace part. # Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. # Note: This option applies only to the class list, not to the alphabetical # list. # The default value is: NO. SORT_BY_SCOPE_NAME = NO # If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper # type resolution of all parameters of a function it will reject a match between # the prototype and the implementation of a member function even if there is # only one candidate or it is obvious which candidate to choose by doing a # simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still # accept a match between prototype and implementation in such cases. # The default value is: NO. STRICT_PROTO_MATCHING = NO # The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo # list. This list is created by putting \todo commands in the documentation. # The default value is: YES. GENERATE_TODOLIST = NO # The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test # list. This list is created by putting \test commands in the documentation. # The default value is: YES. GENERATE_TESTLIST = NO # The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug # list. This list is created by putting \bug commands in the documentation. # The default value is: YES. GENERATE_BUGLIST = NO # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO) # the deprecated list. This list is created by putting \deprecated commands in # the documentation. # The default value is: YES. GENERATE_DEPRECATEDLIST= NO # The ENABLED_SECTIONS tag can be used to enable conditional documentation # sections, marked by \if ... \endif and \cond # ... \endcond blocks. ENABLED_SECTIONS = # The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the # initial value of a variable or macro / define can have for it to appear in the # documentation. If the initializer consists of more lines than specified here # it will be hidden. Use a value of 0 to hide initializers completely. The # appearance of the value of individual variables and macros / defines can be # controlled using \showinitializer or \hideinitializer command in the # documentation regardless of this setting. # Minimum value: 0, maximum value: 10000, default value: 30. MAX_INITIALIZER_LINES = 0 # Set the SHOW_USED_FILES tag to NO to disable the list of files generated at # the bottom of the documentation of classes and structs. If set to YES, the # list will mention the files that were used to generate the documentation. # The default value is: YES. SHOW_USED_FILES = NO # Set the SHOW_FILES tag to NO to disable the generation of the Files page. This # will remove the Files entry from the Quick Index and from the Folder Tree View # (if specified). # The default value is: YES. SHOW_FILES = YES # Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces # page. This will remove the Namespaces entry from the Quick Index and from the # Folder Tree View (if specified). # The default value is: YES. SHOW_NAMESPACES = YES # The FILE_VERSION_FILTER tag can be used to specify a program or script that # doxygen should invoke to get the current version for each file (typically from # the version control system). Doxygen will invoke the program by executing (via # popen()) the command command input-file, where command is the value of the # FILE_VERSION_FILTER tag, and input-file is the name of an input file provided # by doxygen. Whatever the program writes to standard output is used as the file # version. For an example see the documentation. FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated # output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. You can # optionally specify a file name after the option, if omitted DoxygenLayout.xml # will be used as the name of the layout file. # # Note that if you run doxygen from a directory containing a file called # DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE # tag is left empty. LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool # to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. CITE_BIB_FILES = #--------------------------------------------------------------------------- # Configuration options related to warning and progress messages #--------------------------------------------------------------------------- # The QUIET tag can be used to turn on/off the messages that are generated to # standard output by doxygen. If QUIET is set to YES this implies that the # messages are off. # The default value is: NO. QUIET = YES # The WARNINGS tag can be used to turn on/off the warning messages that are # generated to standard error (stderr) by doxygen. If WARNINGS is set to YES # this implies that the warnings are on. # # Tip: Turn warnings on while writing the documentation. # The default value is: YES. WARNINGS = YES # If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate # warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag # will automatically be disabled. # The default value is: YES. WARN_IF_UNDOCUMENTED = YES # If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for # potential errors in the documentation, such as not documenting some parameters # in a documented function, or documenting parameters that don't exist or using # markup commands wrongly. # The default value is: YES. WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete # parameter documentation, but not about the absence of documentation. # The default value is: NO. WARN_NO_PARAMDOC = NO # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated # and the warning text. Optionally the format may contain $version, which will # be replaced by the version of the file (if it could be obtained via # FILE_VERSION_FILTER) # The default value is: $file:$line: $text. WARN_FORMAT = "$file:$line: $text" # The WARN_LOGFILE tag can be used to specify a file to which warning and error # messages should be written. If left blank the output is written to standard # error (stderr). WARN_LOGFILE = #--------------------------------------------------------------------------- # Configuration options related to the input files #--------------------------------------------------------------------------- # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with # spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = .deps # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv # documentation (see: http://www.gnu.org/software/libiconv) for the list of # possible encodings. # The default value is: UTF-8. INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and # *.h) to filter out the source-files in the directories. # # Note that for custom extensions or not directly supported extensions you also # need to set EXTENSION_MAPPING for the extension otherwise the files are not # read by doxygen. # # If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, # *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, # *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, # *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, # *.vhdl, *.ucf, *.qsf, *.as and *.js. FILE_PATTERNS = # The RECURSIVE tag can be used to specify whether or not subdirectories should # be searched for input files as well. # The default value is: NO. RECURSIVE = YES # The EXCLUDE tag can be used to specify files and/or directories that should be # excluded from the INPUT source files. This way you can easily exclude a # subdirectory from a directory tree whose root is specified with the INPUT tag. # # Note that relative paths are relative to the directory from which doxygen is # run. EXCLUDE = # The EXCLUDE_SYMLINKS tag can be used to select whether or not files or # directories that are symbolic links (a Unix file system feature) are excluded # from the input. # The default value is: NO. EXCLUDE_SYMLINKS = NO # If the value of the INPUT tag contains directories, you can use the # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude # certain files from those directories. # # Note that the wildcards are matched against the file with absolute path, so to # exclude all test directories for example use the pattern */test/* EXCLUDE_PATTERNS = # The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names # (namespaces, classes, functions, etc.) that should be excluded from the # output. The symbol name can be a fully qualified name, a word, or if the # wildcard * is used, a substring. Examples: ANamespace, AClass, # AClass::ANamespace, ANamespace::*Test # # Note that the wildcards are matched against the file with absolute path, so to # exclude all test directories use the pattern */test/* EXCLUDE_SYMBOLS = # The EXAMPLE_PATH tag can be used to specify one or more files or directories # that contain example code fragments that are included (see the \include # command). EXAMPLE_PATH = # If the value of the EXAMPLE_PATH tag contains directories, you can use the # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and # *.h) to filter out the source-files in the directories. If left blank all # files are included. EXAMPLE_PATTERNS = # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be # searched for input files to be used with the \include or \dontinclude commands # irrespective of the value of the RECURSIVE tag. # The default value is: NO. EXAMPLE_RECURSIVE = NO # The IMAGE_PATH tag can be used to specify one or more files or directories # that contain images that are to be included in the documentation (see the # \image command). IMAGE_PATH = # The INPUT_FILTER tag can be used to specify a program that doxygen should # invoke to filter for each input file. Doxygen will invoke the filter program # by executing (via popen()) the command: # # # # where is the value of the INPUT_FILTER tag, and is the # name of an input file. Doxygen will then use the output that the filter # program writes to standard output. If FILTER_PATTERNS is specified, this tag # will be ignored. # # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. INPUT_FILTER = # The FILTER_PATTERNS tag can be used to specify filters on a per file pattern # basis. Doxygen will compare the file name with each pattern and apply the # filter if there is a match. The filters are a list of the form: pattern=filter # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. FILTER_PATTERNS = # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using # INPUT_FILTER) will also be used to filter the input files that are used for # producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES). # The default value is: NO. FILTER_SOURCE_FILES = NO # The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file # pattern. A pattern will override the setting for FILTER_PATTERN (if any) and # it is also possible to disable source filtering for a specific pattern using # *.ext= (so without naming a filter). # This tag requires that the tag FILTER_SOURCE_FILES is set to YES. FILTER_SOURCE_PATTERNS = # If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that # is part of the input, its contents will be placed on the main page # (index.html). This can be useful if you have a project on for instance GitHub # and want to reuse the introduction page also for the doxygen output. USE_MDFILE_AS_MAINPAGE = #--------------------------------------------------------------------------- # Configuration options related to source browsing #--------------------------------------------------------------------------- # If the SOURCE_BROWSER tag is set to YES then a list of source files will be # generated. Documented entities will be cross-referenced with these sources. # # Note: To get rid of all source code in the generated output, make sure that # also VERBATIM_HEADERS is set to NO. # The default value is: NO. SOURCE_BROWSER = NO # Setting the INLINE_SOURCES tag to YES will include the body of functions, # classes and enums directly into the documentation. # The default value is: NO. INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any # special comment blocks from generated source code fragments. Normal C, C++ and # Fortran comments will always remain visible. # The default value is: YES. STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented # function all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO # If the REFERENCES_RELATION tag is set to YES then for each documented function # all documented entities called/used by that function will be listed. # The default value is: NO. REFERENCES_RELATION = NO # If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set # to YES then the hyperlinks from functions in REFERENCES_RELATION and # REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will # link to the documentation. # The default value is: YES. REFERENCES_LINK_SOURCE = YES # If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the # source code will show a tooltip with additional information such as prototype, # brief description and links to the definition and documentation. Since this # will make the HTML file larger and loading of large files a bit slower, you # can opt to disable this feature. # The default value is: YES. # This tag requires that the tag SOURCE_BROWSER is set to YES. SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system # (see http://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global # - Enable SOURCE_BROWSER and USE_HTAGS in the config file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # # Doxygen will invoke htags (and that will in turn invoke gtags), so these # tools must be available from the command line (i.e. in the search path). # # The result: instead of the source browser generated by doxygen, the links to # source code will now point to the output of htags. # The default value is: NO. # This tag requires that the tag SOURCE_BROWSER is set to YES. USE_HTAGS = NO # If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a # verbatim copy of the header file for each class for which an include is # specified. Set to NO to disable this. # See also: Section \class. # The default value is: YES. VERBATIM_HEADERS = NO #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- # If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all # compounds will be generated. Enable this if the project contains a lot of # classes, structs, unions or interfaces. # The default value is: YES. ALPHABETICAL_INDEX = YES # The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in # which the alphabetical index list will be split. # Minimum value: 1, maximum value: 20, default value: 5. # This tag requires that the tag ALPHABETICAL_INDEX is set to YES. COLS_IN_ALPHA_INDEX = 5 # In case all classes in a project start with a common prefix, all classes will # be put under the same header in the alphabetical index. The IGNORE_PREFIX tag # can be used to specify a prefix (or a list of prefixes) that should be ignored # while generating the index headers. # This tag requires that the tag ALPHABETICAL_INDEX is set to YES. IGNORE_PREFIX = #--------------------------------------------------------------------------- # Configuration options related to the HTML output #--------------------------------------------------------------------------- # If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output # The default value is: YES. GENERATE_HTML = $(GENERATE_HTML) # The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a # relative path is entered the value of OUTPUT_DIRECTORY will be put in front of # it. # The default directory is: html. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_OUTPUT = html # The HTML_FILE_EXTENSION tag can be used to specify the file extension for each # generated HTML page (for example: .htm, .php, .asp). # The default value is: .html. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_FILE_EXTENSION = .html # The HTML_HEADER tag can be used to specify a user-defined HTML header file for # each generated HTML page. If the tag is left blank doxygen will generate a # standard header. # # To get valid HTML the header file that includes any scripts and style sheets # that doxygen needs, which is dependent on the configuration options used (e.g. # the setting GENERATE_TREEVIEW). It is highly recommended to start with a # default header using # doxygen -w html new_header.html new_footer.html new_stylesheet.css # YourConfigFile # and then modify the file new_header.html. See also section "Doxygen usage" # for information on how to generate the default header that doxygen normally # uses. # Note: The header is subject to change so you typically have to regenerate the # default header when upgrading to a newer version of doxygen. For a description # of the possible markers and block names see the documentation. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_HEADER = # The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each # generated HTML page. If the tag is left blank doxygen will generate a standard # footer. See HTML_HEADER for more information on how to generate a default # footer and what special commands can be used inside the footer. See also # section "Doxygen usage" for information on how to generate the default footer # that doxygen normally uses. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading style # sheet that is used by each HTML page. It can be used to fine-tune the look of # the HTML output. If left blank doxygen will generate a default style sheet. # See also section "Doxygen usage" for information on how to generate the style # sheet that doxygen normally uses. # Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as # it is more robust and this tag (HTML_STYLESHEET) will in the future become # obsolete. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_STYLESHEET = # The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined # cascading style sheets that are included after the standard style sheets # created by doxygen. Using this option one can overrule certain style aspects. # This is preferred over using HTML_STYLESHEET since it does not replace the # standard style sheet and is therefore more robust against future updates. # Doxygen will copy the style sheet files to the output directory. # Note: The order of the extra style sheet files is of importance (e.g. the last # style sheet in the list overrules the setting of the previous ones in the # list). For an example see the documentation. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the # $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these # files. In the HTML_STYLESHEET file, use the file name only. Also note that the # files will be copied as-is; there are no commands or markers available. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see # http://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_COLORSTYLE_HUE = 220 # The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors # in the HTML output. For a value of 0 the output will use grayscales only. A # value of 255 will produce the most vivid colors. # Minimum value: 0, maximum value: 255, default value: 100. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_COLORSTYLE_SAT = 100 # The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the # luminance component of the colors in the HTML output. Values below 100 # gradually make the output lighter, whereas values above 100 make the output # darker. The value divided by 100 is the actual gamma applied, so 80 represents # a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not # change the gamma. # Minimum value: 40, maximum value: 240, default value: 80. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this # to YES can help to show when doxygen was last run and thus if the # documentation is up to date. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_DYNAMIC_SECTIONS = NO # With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries # shown in the various tree structured indices initially; the user can expand # and collapse entries dynamically later on. Doxygen will expand the tree to # such a level that at most the specified number of entries are visible (unless # a fully collapsed tree already exceeds this amount). So setting the number of # entries 1 will produce a full collapsed tree by default. 0 is a special value # representing an infinite number of entries and will result in a full expanded # tree by default. # Minimum value: 0, maximum value: 9999, default value: 100. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development # environment (see: http://developer.apple.com/tools/xcode/), introduced with # OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at # startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html # for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. GENERATE_DOCSET = NO # This tag determines the name of the docset feed. A documentation feed provides # an umbrella under which multiple documentation sets from a single provider # (such as a company or product suite) can be grouped. # The default value is: Doxygen generated docs. # This tag requires that the tag GENERATE_DOCSET is set to YES. DOCSET_FEEDNAME = "Doxygen generated docs" # This tag specifies a string that should uniquely identify the documentation # set bundle. This should be a reverse domain-name style string, e.g. # com.mycompany.MyDocSet. Doxygen will append .docset to the name. # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_DOCSET is set to YES. DOCSET_BUNDLE_ID = org.doxygen.Project # The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify # the documentation publisher. This should be a reverse domain-name style # string, e.g. com.mycompany.MyDocSet.documentation. # The default value is: org.doxygen.Publisher. # This tag requires that the tag GENERATE_DOCSET is set to YES. DOCSET_PUBLISHER_ID = org.doxygen.Publisher # The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher. # The default value is: Publisher. # This tag requires that the tag GENERATE_DOCSET is set to YES. DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop # (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output # generated by doxygen into a single compiled HTML file (.chm). Compiled HTML # files are now used as the Windows 98 help format, and will replace the old # Windows help format (.hlp) on all Windows platforms in the future. Compressed # HTML files also contain an index, a table of contents, and you can search for # words in the documentation. The HTML workshop also contains a viewer for # compressed HTML files. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. GENERATE_HTMLHELP = $(GENERATE_HTMLHELP) # The CHM_FILE tag can be used to specify the file name of the resulting .chm # file. You can add a path in front of the file if the result should not be # written to the html output directory. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. CHM_FILE = ../$(PROJECT).chm # The HHC_LOCATION tag can be used to specify the location (absolute path # including file name) of the HTML help compiler (hhc.exe). If non-empty, # doxygen will try to run the HTML help compiler on the generated index.hhp. # The file has to be specified with full path. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. HHC_LOCATION = $(HHC_PATH) # The GENERATE_CHI flag controls if a separate .chi index file is generated # (YES) or that it should be included in the master .chm file (NO). # The default value is: NO. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. GENERATE_CHI = $(GENERATE_CHI) # The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc) # and project file content. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. CHM_INDEX_ENCODING = # The BINARY_TOC flag controls whether a binary table of contents is generated # (YES) or a normal table of contents (NO) in the .chm file. Furthermore it # enables the Previous and Next buttons. # The default value is: NO. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. BINARY_TOC = NO # The TOC_EXPAND flag can be set to YES to add extra items for group members to # the table of contents of the HTML help documentation and to the tree view. # The default value is: NO. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. TOC_EXPAND = YES # If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and # QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that # can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help # (.qch) of the generated HTML documentation. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. GENERATE_QHP = NO # If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify # the file name of the resulting .qch file. The path specified is relative to # the HTML output folder. # This tag requires that the tag GENERATE_QHP is set to YES. QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace # (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual # Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom # Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom # Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: # http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = # The QHG_LOCATION tag can be used to specify the location of Qt's # qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the # generated .qhp file. # This tag requires that the tag GENERATE_QHP is set to YES. QHG_LOCATION = # If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be # generated, together with the HTML files, they form an Eclipse help plugin. To # install this plugin and make it available under the help contents menu in # Eclipse, the contents of the directory containing the HTML and XML files needs # to be copied into the plugins directory of eclipse. The name of the directory # within the plugins directory should be the same as the ECLIPSE_DOC_ID value. # After copying Eclipse needs to be restarted before the help appears. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. GENERATE_ECLIPSEHELP = NO # A unique identifier for the Eclipse help plugin. When installing the plugin # the directory name containing the HTML and XML files should also have this # name. Each documentation set should have its own identifier. # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES. ECLIPSE_DOC_ID = org.doxygen.Project # If you want full control over the layout of the generated HTML pages it might # be necessary to disable the index and replace it with your own. The # DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top # of each HTML page. A value of NO enables the index and the value YES disables # it. Since the tabs in the index contain the same information as the navigation # tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. If the tag # value is set to YES, a side panel will be generated containing a tree-like # index structure (just like the one that is generated for HTML Help). For this # to work a browser that supports JavaScript, DHTML, CSS and frames is required # (i.e. any modern browser). Windows users are probably better off using the # HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can # further fine-tune the look of the index. As an example, the default style # sheet generated by doxygen has an example that shows how to put an image at # the root of the tree instead of the PROJECT_NAME. Since the tree basically has # the same information as the tab index, you could consider setting # DISABLE_INDEX to YES when enabling this option. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. GENERATE_TREEVIEW = NO # The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that # doxygen will group on one line in the generated HTML documentation. # # Note that a value of 0 will completely suppress the enum values from appearing # in the overview section. # Minimum value: 0, maximum value: 20, default value: 4. # This tag requires that the tag GENERATE_HTML is set to YES. ENUM_VALUES_PER_LINE = 4 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used # to set the initial width (in pixels) of the frame in which the tree is shown. # Minimum value: 0, maximum value: 1500, default value: 250. # This tag requires that the tag GENERATE_HTML is set to YES. TREEVIEW_WIDTH = 250 # If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to # external symbols imported via tag files in a separate window. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. EXT_LINKS_IN_WINDOW = NO # Use this tag to change the font size of LaTeX formulas included as images in # the HTML documentation. When you change the font size after a successful # doxygen run you need to manually remove any form_*.png images from the HTML # output directory to force them to be regenerated. # Minimum value: 8, maximum value: 50, default value: 10. # This tag requires that the tag GENERATE_HTML is set to YES. FORMULA_FONTSIZE = 10 # Use the FORMULA_TRANPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # # Note that when changing this option you need to delete any form_*.png files in # the HTML output directory before the changes have effect. # The default value is: YES. # This tag requires that the tag GENERATE_HTML is set to YES. FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see # http://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path # to it using the MATHJAX_RELPATH option. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for # the MathJax output. See the MathJax site (see: # http://docs.mathjax.org/en/latest/output.html) for more details. # Possible values are: HTML-CSS (which is slower, but has the best # compatibility), NativeMML (i.e. MathML) and SVG. # The default value is: HTML-CSS. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_FORMAT = HTML-CSS # When MathJax is enabled you need to specify the location relative to the HTML # output directory using the MATHJAX_RELPATH option. The destination directory # should contain the MathJax.js script. For instance, if the mathjax directory # is located at the same level as the HTML output directory, then # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of # MathJax from http://www.mathjax.org before deployment. # The default value is: http://cdn.mathjax.org/mathjax/latest. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest # The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax # extension names that should be enabled during MathJax rendering. For example # MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_EXTENSIONS = # The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces # of code that will be used on startup of the MathJax code. See the MathJax site # (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an # example see the documentation. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_CODEFILE = # When the SEARCHENGINE tag is enabled doxygen will generate a search box for # the HTML output. The underlying search engine uses javascript and DHTML and # should work on any modern browser. Note that when using HTML help # (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET) # there is already a search function so this one should typically be disabled. # For large projects the javascript based search engine can be slow, then # enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to # search using the keyboard; to jump to the search box use + S # (what the is depends on the OS and browser, but it is typically # , /