libetonyek-0.0.3/ 0000775 0001750 0001750 00000000000 12270445767 011507 5 ustar jr jr libetonyek-0.0.3/createBuildNumber.pl 0000664 0001750 0001750 00000002732 12250351501 015420 0 ustar jr jr #!/usr/bin/perl
# ***** BEGIN LICENSE BLOCK *****
# Version: LGPL 2.1
#
# The Original Code is Mozilla Calendar Code.
#
# Copyright (C) 2002 Christopher S. Charabaruk (ccharabaruk@meldstar.com).
# Copyright (C) 2004 Fridrich Strba (fridrich.strba@bluewin.ch).
# All Rights Reserved.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU Lesser General Public
# License as published by the Free Software Foundation; either
# version 2 of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# Library General Public License for more details.
#
# You should have received a copy of the GNU Library General Public
# License along with this library; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
#
# ***** END LICENSE BLOCK *****
# create a build id to be used by build/win32/compile-resource
@timevars = localtime(time);
$buildid = sprintf("%1.1d%.2d%.2d", ($timevars[5] - 100) , ($timevars[4] + 1) , $timevars[3]);
#print our build id
print $buildid . "\n";
foreach $file (@ARGV)
{
# print filename
print "Working on " . $file . "\n";
open(OUT,">" . $file) or die "cannot open " . $file . "-temp for write\n";
print OUT $buildid . "\n";
close (OUT);
}
print "All done!\n";
libetonyek-0.0.3/depcomp 0000664 0001750 0001750 00000056016 12270445730 013057 0 ustar jr jr #! /bin/sh
# depcomp - compile a program generating dependencies as side-effects
scriptversion=2013-05-30.07; # UTC
# Copyright (C) 1999-2013 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program. If not, see .
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
# Originally written by Alexandre Oliva .
case $1 in
'')
echo "$0: No command. Try '$0 --help' for more information." 1>&2
exit 1;
;;
-h | --h*)
cat <<\EOF
Usage: depcomp [--help] [--version] PROGRAM [ARGS]
Run PROGRAMS ARGS to compile a file, generating dependencies
as side-effects.
Environment variables:
depmode Dependency tracking mode.
source Source file read by 'PROGRAMS ARGS'.
object Object file output by 'PROGRAMS ARGS'.
DEPDIR directory where to store dependencies.
depfile Dependency file to output.
tmpdepfile Temporary file to use when outputting dependencies.
libtool Whether libtool is used (yes/no).
Report bugs to .
EOF
exit $?
;;
-v | --v*)
echo "depcomp $scriptversion"
exit $?
;;
esac
# Get the directory component of the given path, and save it in the
# global variables '$dir'. Note that this directory component will
# be either empty or ending with a '/' character. This is deliberate.
set_dir_from ()
{
case $1 in
*/*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;;
*) dir=;;
esac
}
# Get the suffix-stripped basename of the given path, and save it the
# global variable '$base'.
set_base_from ()
{
base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'`
}
# If no dependency file was actually created by the compiler invocation,
# we still have to create a dummy depfile, to avoid errors with the
# Makefile "include basename.Plo" scheme.
make_dummy_depfile ()
{
echo "#dummy" > "$depfile"
}
# Factor out some common post-processing of the generated depfile.
# Requires the auxiliary global variable '$tmpdepfile' to be set.
aix_post_process_depfile ()
{
# If the compiler actually managed to produce a dependency file,
# post-process it.
if test -f "$tmpdepfile"; then
# Each line is of the form 'foo.o: dependency.h'.
# Do two passes, one to just change these to
# $object: dependency.h
# and one to simply output
# dependency.h:
# which is needed to avoid the deleted-header problem.
{ sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile"
sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile"
} > "$depfile"
rm -f "$tmpdepfile"
else
make_dummy_depfile
fi
}
# A tabulation character.
tab=' '
# A newline character.
nl='
'
# Character ranges might be problematic outside the C locale.
# These definitions help.
upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ
lower=abcdefghijklmnopqrstuvwxyz
digits=0123456789
alpha=${upper}${lower}
if test -z "$depmode" || test -z "$source" || test -z "$object"; then
echo "depcomp: Variables source, object and depmode must be set" 1>&2
exit 1
fi
# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
depfile=${depfile-`echo "$object" |
sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
rm -f "$tmpdepfile"
# Avoid interferences from the environment.
gccflag= dashmflag=
# Some modes work just like other modes, but use different flags. We
# parameterize here, but still list the modes in the big case below,
# to make depend.m4 easier to write. Note that we *cannot* use a case
# here, because this file can only contain one case statement.
if test "$depmode" = hp; then
# HP compiler uses -M and no extra arg.
gccflag=-M
depmode=gcc
fi
if test "$depmode" = dashXmstdout; then
# This is just like dashmstdout with a different argument.
dashmflag=-xM
depmode=dashmstdout
fi
cygpath_u="cygpath -u -f -"
if test "$depmode" = msvcmsys; then
# This is just like msvisualcpp but w/o cygpath translation.
# Just convert the backslash-escaped backslashes to single forward
# slashes to satisfy depend.m4
cygpath_u='sed s,\\\\,/,g'
depmode=msvisualcpp
fi
if test "$depmode" = msvc7msys; then
# This is just like msvc7 but w/o cygpath translation.
# Just convert the backslash-escaped backslashes to single forward
# slashes to satisfy depend.m4
cygpath_u='sed s,\\\\,/,g'
depmode=msvc7
fi
if test "$depmode" = xlc; then
# IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information.
gccflag=-qmakedep=gcc,-MF
depmode=gcc
fi
case "$depmode" in
gcc3)
## gcc 3 implements dependency tracking that does exactly what
## we want. Yay! Note: for some reason libtool 1.4 doesn't like
## it if -MD -MP comes after the -MF stuff. Hmm.
## Unfortunately, FreeBSD c89 acceptance of flags depends upon
## the command line argument order; so add the flags where they
## appear in depend2.am. Note that the slowdown incurred here
## affects only configure: in makefiles, %FASTDEP% shortcuts this.
for arg
do
case $arg in
-c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
*) set fnord "$@" "$arg" ;;
esac
shift # fnord
shift # $arg
done
"$@"
stat=$?
if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
mv "$tmpdepfile" "$depfile"
;;
gcc)
## Note that this doesn't just cater to obsosete pre-3.x GCC compilers.
## but also to in-use compilers like IMB xlc/xlC and the HP C compiler.
## (see the conditional assignment to $gccflag above).
## There are various ways to get dependency output from gcc. Here's
## why we pick this rather obscure method:
## - Don't want to use -MD because we'd like the dependencies to end
## up in a subdir. Having to rename by hand is ugly.
## (We might end up doing this anyway to support other compilers.)
## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
## -MM, not -M (despite what the docs say). Also, it might not be
## supported by the other compilers which use the 'gcc' depmode.
## - Using -M directly means running the compiler twice (even worse
## than renaming).
if test -z "$gccflag"; then
gccflag=-MD,
fi
"$@" -Wp,"$gccflag$tmpdepfile"
stat=$?
if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
echo "$object : \\" > "$depfile"
# The second -e expression handles DOS-style file names with drive
# letters.
sed -e 's/^[^:]*: / /' \
-e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
## This next piece of magic avoids the "deleted header file" problem.
## The problem is that when a header file which appears in a .P file
## is deleted, the dependency causes make to die (because there is
## typically no way to rebuild the header). We avoid this by adding
## dummy dependencies for each header file. Too bad gcc doesn't do
## this for us directly.
## Some versions of gcc put a space before the ':'. On the theory
## that the space means something, we add a space to the output as
## well. hp depmode also adds that space, but also prefixes the VPATH
## to the object. Take care to not repeat it in the output.
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly. Breaking it into two sed invocations is a workaround.
tr ' ' "$nl" < "$tmpdepfile" \
| sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
| sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
hp)
# This case exists only to let depend.m4 do its work. It works by
# looking at the text of this script. This case will never be run,
# since it is checked for above.
exit 1
;;
sgi)
if test "$libtool" = yes; then
"$@" "-Wp,-MDupdate,$tmpdepfile"
else
"$@" -MDupdate "$tmpdepfile"
fi
stat=$?
if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
echo "$object : \\" > "$depfile"
# Clip off the initial element (the dependent). Don't try to be
# clever and replace this with sed code, as IRIX sed won't handle
# lines with more than a fixed number of characters (4096 in
# IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
# the IRIX cc adds comments like '#:fec' to the end of the
# dependency line.
tr ' ' "$nl" < "$tmpdepfile" \
| sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \
| tr "$nl" ' ' >> "$depfile"
echo >> "$depfile"
# The second pass generates a dummy entry for each header file.
tr ' ' "$nl" < "$tmpdepfile" \
| sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
>> "$depfile"
else
make_dummy_depfile
fi
rm -f "$tmpdepfile"
;;
xlc)
# This case exists only to let depend.m4 do its work. It works by
# looking at the text of this script. This case will never be run,
# since it is checked for above.
exit 1
;;
aix)
# The C for AIX Compiler uses -M and outputs the dependencies
# in a .u file. In older versions, this file always lives in the
# current directory. Also, the AIX compiler puts '$object:' at the
# start of each line; $object doesn't have directory information.
# Version 6 uses the directory in both cases.
set_dir_from "$object"
set_base_from "$object"
if test "$libtool" = yes; then
tmpdepfile1=$dir$base.u
tmpdepfile2=$base.u
tmpdepfile3=$dir.libs/$base.u
"$@" -Wc,-M
else
tmpdepfile1=$dir$base.u
tmpdepfile2=$dir$base.u
tmpdepfile3=$dir$base.u
"$@" -M
fi
stat=$?
if test $stat -ne 0; then
rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
exit $stat
fi
for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
do
test -f "$tmpdepfile" && break
done
aix_post_process_depfile
;;
tcc)
# tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26
# FIXME: That version still under development at the moment of writing.
# Make that this statement remains true also for stable, released
# versions.
# It will wrap lines (doesn't matter whether long or short) with a
# trailing '\', as in:
#
# foo.o : \
# foo.c \
# foo.h \
#
# It will put a trailing '\' even on the last line, and will use leading
# spaces rather than leading tabs (at least since its commit 0394caf7
# "Emit spaces for -MD").
"$@" -MD -MF "$tmpdepfile"
stat=$?
if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
# Each non-empty line is of the form 'foo.o : \' or ' dep.h \'.
# We have to change lines of the first kind to '$object: \'.
sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile"
# And for each line of the second kind, we have to emit a 'dep.h:'
# dummy dependency, to avoid the deleted-header problem.
sed -n -e 's|^ *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile"
rm -f "$tmpdepfile"
;;
## The order of this option in the case statement is important, since the
## shell code in configure will try each of these formats in the order
## listed in this file. A plain '-MD' option would be understood by many
## compilers, so we must ensure this comes after the gcc and icc options.
pgcc)
# Portland's C compiler understands '-MD'.
# Will always output deps to 'file.d' where file is the root name of the
# source file under compilation, even if file resides in a subdirectory.
# The object file name does not affect the name of the '.d' file.
# pgcc 10.2 will output
# foo.o: sub/foo.c sub/foo.h
# and will wrap long lines using '\' :
# foo.o: sub/foo.c ... \
# sub/foo.h ... \
# ...
set_dir_from "$object"
# Use the source, not the object, to determine the base name, since
# that's sadly what pgcc will do too.
set_base_from "$source"
tmpdepfile=$base.d
# For projects that build the same source file twice into different object
# files, the pgcc approach of using the *source* file root name can cause
# problems in parallel builds. Use a locking strategy to avoid stomping on
# the same $tmpdepfile.
lockdir=$base.d-lock
trap "
echo '$0: caught signal, cleaning up...' >&2
rmdir '$lockdir'
exit 1
" 1 2 13 15
numtries=100
i=$numtries
while test $i -gt 0; do
# mkdir is a portable test-and-set.
if mkdir "$lockdir" 2>/dev/null; then
# This process acquired the lock.
"$@" -MD
stat=$?
# Release the lock.
rmdir "$lockdir"
break
else
# If the lock is being held by a different process, wait
# until the winning process is done or we timeout.
while test -d "$lockdir" && test $i -gt 0; do
sleep 1
i=`expr $i - 1`
done
fi
i=`expr $i - 1`
done
trap - 1 2 13 15
if test $i -le 0; then
echo "$0: failed to acquire lock after $numtries attempts" >&2
echo "$0: check lockdir '$lockdir'" >&2
exit 1
fi
if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
# Each line is of the form `foo.o: dependent.h',
# or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
# Do two passes, one to just change these to
# `$object: dependent.h' and one to simply `dependent.h:'.
sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
# Some versions of the HPUX 10.20 sed can't process this invocation
# correctly. Breaking it into two sed invocations is a workaround.
sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \
| sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
hp2)
# The "hp" stanza above does not work with aCC (C++) and HP's ia64
# compilers, which have integrated preprocessors. The correct option
# to use with these is +Maked; it writes dependencies to a file named
# 'foo.d', which lands next to the object file, wherever that
# happens to be.
# Much of this is similar to the tru64 case; see comments there.
set_dir_from "$object"
set_base_from "$object"
if test "$libtool" = yes; then
tmpdepfile1=$dir$base.d
tmpdepfile2=$dir.libs/$base.d
"$@" -Wc,+Maked
else
tmpdepfile1=$dir$base.d
tmpdepfile2=$dir$base.d
"$@" +Maked
fi
stat=$?
if test $stat -ne 0; then
rm -f "$tmpdepfile1" "$tmpdepfile2"
exit $stat
fi
for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
do
test -f "$tmpdepfile" && break
done
if test -f "$tmpdepfile"; then
sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile"
# Add 'dependent.h:' lines.
sed -ne '2,${
s/^ *//
s/ \\*$//
s/$/:/
p
}' "$tmpdepfile" >> "$depfile"
else
make_dummy_depfile
fi
rm -f "$tmpdepfile" "$tmpdepfile2"
;;
tru64)
# The Tru64 compiler uses -MD to generate dependencies as a side
# effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
# At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
# dependencies in 'foo.d' instead, so we check for that too.
# Subdirectories are respected.
set_dir_from "$object"
set_base_from "$object"
if test "$libtool" = yes; then
# Libtool generates 2 separate objects for the 2 libraries. These
# two compilations output dependencies in $dir.libs/$base.o.d and
# in $dir$base.o.d. We have to check for both files, because
# one of the two compilations can be disabled. We should prefer
# $dir$base.o.d over $dir.libs/$base.o.d because the latter is
# automatically cleaned when .libs/ is deleted, while ignoring
# the former would cause a distcleancheck panic.
tmpdepfile1=$dir$base.o.d # libtool 1.5
tmpdepfile2=$dir.libs/$base.o.d # Likewise.
tmpdepfile3=$dir.libs/$base.d # Compaq CCC V6.2-504
"$@" -Wc,-MD
else
tmpdepfile1=$dir$base.d
tmpdepfile2=$dir$base.d
tmpdepfile3=$dir$base.d
"$@" -MD
fi
stat=$?
if test $stat -ne 0; then
rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
exit $stat
fi
for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
do
test -f "$tmpdepfile" && break
done
# Same post-processing that is required for AIX mode.
aix_post_process_depfile
;;
msvc7)
if test "$libtool" = yes; then
showIncludes=-Wc,-showIncludes
else
showIncludes=-showIncludes
fi
"$@" $showIncludes > "$tmpdepfile"
stat=$?
grep -v '^Note: including file: ' "$tmpdepfile"
if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
echo "$object : \\" > "$depfile"
# The first sed program below extracts the file names and escapes
# backslashes for cygpath. The second sed program outputs the file
# name when reading, but also accumulates all include files in the
# hold buffer in order to output them again at the end. This only
# works with sed implementations that can handle large buffers.
sed < "$tmpdepfile" -n '
/^Note: including file: *\(.*\)/ {
s//\1/
s/\\/\\\\/g
p
}' | $cygpath_u | sort -u | sed -n '
s/ /\\ /g
s/\(.*\)/'"$tab"'\1 \\/p
s/.\(.*\) \\/\1:/
H
$ {
s/.*/'"$tab"'/
G
p
}' >> "$depfile"
echo >> "$depfile" # make sure the fragment doesn't end with a backslash
rm -f "$tmpdepfile"
;;
msvc7msys)
# This case exists only to let depend.m4 do its work. It works by
# looking at the text of this script. This case will never be run,
# since it is checked for above.
exit 1
;;
#nosideeffect)
# This comment above is used by automake to tell side-effect
# dependency tracking mechanisms from slower ones.
dashmstdout)
# Important note: in order to support this mode, a compiler *must*
# always write the preprocessed file to stdout, regardless of -o.
"$@" || exit $?
# Remove the call to Libtool.
if test "$libtool" = yes; then
while test "X$1" != 'X--mode=compile'; do
shift
done
shift
fi
# Remove '-o $object'.
IFS=" "
for arg
do
case $arg in
-o)
shift
;;
$object)
shift
;;
*)
set fnord "$@" "$arg"
shift # fnord
shift # $arg
;;
esac
done
test -z "$dashmflag" && dashmflag=-M
# Require at least two characters before searching for ':'
# in the target name. This is to cope with DOS-style filenames:
# a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
"$@" $dashmflag |
sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile"
rm -f "$depfile"
cat < "$tmpdepfile" > "$depfile"
# Some versions of the HPUX 10.20 sed can't process this sed invocation
# correctly. Breaking it into two sed invocations is a workaround.
tr ' ' "$nl" < "$tmpdepfile" \
| sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
| sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
dashXmstdout)
# This case only exists to satisfy depend.m4. It is never actually
# run, as this mode is specially recognized in the preamble.
exit 1
;;
makedepend)
"$@" || exit $?
# Remove any Libtool call
if test "$libtool" = yes; then
while test "X$1" != 'X--mode=compile'; do
shift
done
shift
fi
# X makedepend
shift
cleared=no eat=no
for arg
do
case $cleared in
no)
set ""; shift
cleared=yes ;;
esac
if test $eat = yes; then
eat=no
continue
fi
case "$arg" in
-D*|-I*)
set fnord "$@" "$arg"; shift ;;
# Strip any option that makedepend may not understand. Remove
# the object too, otherwise makedepend will parse it as a source file.
-arch)
eat=yes ;;
-*|$object)
;;
*)
set fnord "$@" "$arg"; shift ;;
esac
done
obj_suffix=`echo "$object" | sed 's/^.*\././'`
touch "$tmpdepfile"
${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
rm -f "$depfile"
# makedepend may prepend the VPATH from the source file name to the object.
# No need to regex-escape $object, excess matching of '.' is harmless.
sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
# Some versions of the HPUX 10.20 sed can't process the last invocation
# correctly. Breaking it into two sed invocations is a workaround.
sed '1,2d' "$tmpdepfile" \
| tr ' ' "$nl" \
| sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
| sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile" "$tmpdepfile".bak
;;
cpp)
# Important note: in order to support this mode, a compiler *must*
# always write the preprocessed file to stdout.
"$@" || exit $?
# Remove the call to Libtool.
if test "$libtool" = yes; then
while test "X$1" != 'X--mode=compile'; do
shift
done
shift
fi
# Remove '-o $object'.
IFS=" "
for arg
do
case $arg in
-o)
shift
;;
$object)
shift
;;
*)
set fnord "$@" "$arg"
shift # fnord
shift # $arg
;;
esac
done
"$@" -E \
| sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
-e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
| sed '$ s: \\$::' > "$tmpdepfile"
rm -f "$depfile"
echo "$object : \\" > "$depfile"
cat < "$tmpdepfile" >> "$depfile"
sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
msvisualcpp)
# Important note: in order to support this mode, a compiler *must*
# always write the preprocessed file to stdout.
"$@" || exit $?
# Remove the call to Libtool.
if test "$libtool" = yes; then
while test "X$1" != 'X--mode=compile'; do
shift
done
shift
fi
IFS=" "
for arg
do
case "$arg" in
-o)
shift
;;
$object)
shift
;;
"-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
set fnord "$@"
shift
shift
;;
*)
set fnord "$@" "$arg"
shift
shift
;;
esac
done
"$@" -E 2>/dev/null |
sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
rm -f "$depfile"
echo "$object : \\" > "$depfile"
sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile"
echo "$tab" >> "$depfile"
sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
rm -f "$tmpdepfile"
;;
msvcmsys)
# This case exists only to let depend.m4 do its work. It works by
# looking at the text of this script. This case will never be run,
# since it is checked for above.
exit 1
;;
none)
exec "$@"
;;
*)
echo "Unknown depmode $depmode" 1>&2
exit 1
;;
esac
exit 0
# Local Variables:
# mode: shell-script
# sh-indentation: 2
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-time-zone: "UTC"
# time-stamp-end: "; # UTC"
# End:
libetonyek-0.0.3/ar-lib 0000664 0001750 0001750 00000013302 12270445730 012565 0 ustar jr jr #! /bin/sh
# Wrapper for Microsoft lib.exe
me=ar-lib
scriptversion=2012-03-01.08; # UTC
# Copyright (C) 2010-2013 Free Software Foundation, Inc.
# Written by Peter Rosin .
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see .
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
# This file is maintained in Automake, please report
# bugs to or send patches to
# .
# func_error message
func_error ()
{
echo "$me: $1" 1>&2
exit 1
}
file_conv=
# func_file_conv build_file
# Convert a $build file to $host form and store it in $file
# Currently only supports Windows hosts.
func_file_conv ()
{
file=$1
case $file in
/ | /[!/]*) # absolute file, and not a UNC file
if test -z "$file_conv"; then
# lazily determine how to convert abs files
case `uname -s` in
MINGW*)
file_conv=mingw
;;
CYGWIN*)
file_conv=cygwin
;;
*)
file_conv=wine
;;
esac
fi
case $file_conv in
mingw)
file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
;;
cygwin)
file=`cygpath -m "$file" || echo "$file"`
;;
wine)
file=`winepath -w "$file" || echo "$file"`
;;
esac
;;
esac
}
# func_at_file at_file operation archive
# Iterate over all members in AT_FILE performing OPERATION on ARCHIVE
# for each of them.
# When interpreting the content of the @FILE, do NOT use func_file_conv,
# since the user would need to supply preconverted file names to
# binutils ar, at least for MinGW.
func_at_file ()
{
operation=$2
archive=$3
at_file_contents=`cat "$1"`
eval set x "$at_file_contents"
shift
for member
do
$AR -NOLOGO $operation:"$member" "$archive" || exit $?
done
}
case $1 in
'')
func_error "no command. Try '$0 --help' for more information."
;;
-h | --h*)
cat <$title documentation
libetonyek-0.0.3/docs/doxygen/doxygen.cfg 0000664 0001750 0001750 00000212052 12250351501 016230 0 ustar jr jr # Doxyfile 1.7.3
# This file describes the settings to be used by the documentation system
# doxygen (www.doxygen.org) for a project.
#
# All text after a hash (#) is considered a comment and will be ignored.
# The format is:
# TAG = value [value, ...]
# For lists items can also be appended using:
# TAG += value [value, ...]
# Values that contain spaces should be placed between quotes (" ").
#---------------------------------------------------------------------------
# Project related configuration options
#---------------------------------------------------------------------------
# This tag specifies the encoding used for all characters in the config file
# that follow. The default is UTF-8 which is also the encoding used for all
# text before the first occurrence of this tag. Doxygen uses libiconv (or the
# iconv built into libc) for the transcoding. See
# http://www.gnu.org/software/libiconv for the list of possible encodings.
DOXYFILE_ENCODING = UTF-8
# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
# by quotes) that should identify the project.
PROJECT_NAME = libetonyek
# The PROJECT_NUMBER tag can be used to enter a project or revision number.
# This could be handy for archiving the generated documentation or
# if some version control system is used.
PROJECT_NUMBER =
# Using the PROJECT_BRIEF tag one can provide an optional one line description for a project that appears at the top of each page and should give viewer a quick idea about the purpose of the project. Keep the description short.
PROJECT_BRIEF =
# With the PROJECT_LOGO tag one can specify an logo or icon that is
# included in the documentation. The maximum height of the logo should not
# exceed 55 pixels and the maximum width should not exceed 200 pixels.
# Doxygen will copy the logo to the output directory.
PROJECT_LOGO =
# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
# base path where the generated documentation will be put.
# If a relative path is entered, it will be relative to the location
# where doxygen was started. If left blank the current directory will be used.
OUTPUT_DIRECTORY = ./
# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
# 4096 sub-directories (in 2 levels) under the output directory of each output
# format and will distribute the generated files over these directories.
# Enabling this option can be useful when feeding doxygen a huge amount of
# source files, where putting all generated files in the same directory would
# otherwise cause performance problems for the file system.
CREATE_SUBDIRS = NO
# The OUTPUT_LANGUAGE tag is used to specify the language in which all
# documentation generated by doxygen is written. Doxygen will use this
# information to generate all constant output in the proper language.
# The default language is English, other supported languages are:
# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak,
# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
OUTPUT_LANGUAGE = English
# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
# include brief member descriptions after the members that are listed in
# the file and class documentation (similar to JavaDoc).
# Set to NO to disable this.
BRIEF_MEMBER_DESC = YES
# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
# the brief description of a member or function before the detailed description.
# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
# brief descriptions will be completely suppressed.
REPEAT_BRIEF = YES
# This tag implements a quasi-intelligent brief description abbreviator
# that is used to form the text in various listings. Each string
# in this list, if found as the leading text of the brief description, will be
# stripped from the text and the result after processing the whole list, is
# used as the annotated text. Otherwise, the brief description is used as-is.
# If left blank, the following values are used ("$name" is automatically
# replaced with the name of the entity): "The $name class" "The $name widget"
# "The $name file" "is" "provides" "specifies" "contains"
# "represents" "a" "an" "the"
ABBREVIATE_BRIEF =
# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
# Doxygen will generate a detailed section even if there is only a brief
# description.
ALWAYS_DETAILED_SEC = NO
# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
# inherited members of a class in the documentation of that class as if those
# members were ordinary class members. Constructors, destructors and assignment
# operators of the base classes will not be shown.
INLINE_INHERITED_MEMB = NO
# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
# path before files name in the file list and in the header files. If set
# to NO the shortest path that makes the file name unique will be used.
FULL_PATH_NAMES = NO
# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
# can be used to strip a user-defined part of the path. Stripping is
# only done if one of the specified strings matches the left-hand part of
# the path. The tag can be used to show relative paths in the file list.
# If left blank the directory from which doxygen is run is used as the
# path to strip.
STRIP_FROM_PATH =
# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
# the path mentioned in the documentation of a class, which tells
# the reader which header file to include in order to use a class.
# If left blank only the name of the header file containing the class
# definition is used. Otherwise one should specify the include paths that
# are normally passed to the compiler using the -I flag.
STRIP_FROM_INC_PATH =
# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
# (but less readable) file names. This can be useful if your file system
# doesn't support long names like on DOS, Mac, or CD-ROM.
SHORT_NAMES = NO
# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
# will interpret the first line (until the first dot) of a JavaDoc-style
# comment as the brief description. If set to NO, the JavaDoc
# comments will behave just like regular Qt-style comments
# (thus requiring an explicit @brief command for a brief description.)
JAVADOC_AUTOBRIEF = YES
# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
# interpret the first line (until the first dot) of a Qt-style
# comment as the brief description. If set to NO, the comments
# will behave just like regular Qt-style comments (thus requiring
# an explicit \brief command for a brief description.)
QT_AUTOBRIEF = NO
# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
# treat a multi-line C++ special comment block (i.e. a block of //! or ///
# comments) as a brief description. This used to be the default behaviour.
# The new default is to treat a multi-line C++ comment block as a detailed
# description. Set this tag to YES if you prefer the old behaviour instead.
MULTILINE_CPP_IS_BRIEF = NO
# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
# member inherits the documentation from any documented member that it
# re-implements.
INHERIT_DOCS = YES
# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
# a new page for each member. If set to NO, the documentation of a member will
# be part of the file/class/namespace that contains it.
SEPARATE_MEMBER_PAGES = NO
# The TAB_SIZE tag can be used to set the number of spaces in a tab.
# Doxygen uses this value to replace tabs by spaces in code fragments.
TAB_SIZE = 8
# This tag can be used to specify a number of aliases that acts
# as commands in the documentation. An alias has the form "name=value".
# For example adding "sideeffect=\par Side Effects:\n" will allow you to
# put the command \sideeffect (or @sideeffect) in the documentation, which
# will result in a user-defined paragraph with heading "Side Effects:".
# You can put \n's in the value part of an alias to insert newlines.
ALIASES =
# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
# sources only. Doxygen will then generate output that is more tailored for C.
# For instance, some of the names that are used will be different. The list
# of all members will be omitted, etc.
OPTIMIZE_OUTPUT_FOR_C = NO
# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
# sources only. Doxygen will then generate output that is more tailored for
# Java. For instance, namespaces will be presented as packages, qualified
# scopes will look different, etc.
OPTIMIZE_OUTPUT_JAVA = NO
# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
# sources only. Doxygen will then generate output that is more tailored for
# Fortran.
OPTIMIZE_FOR_FORTRAN = NO
# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
# sources. Doxygen will then generate output that is tailored for
# VHDL.
OPTIMIZE_OUTPUT_VHDL = NO
# Doxygen selects the parser to use depending on the extension of the files it
# parses. With this tag you can assign which parser to use for a given extension.
# Doxygen has a built-in mapping, but you can override or extend it using this
# tag. The format is ext=language, where ext is a file extension, and language
# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
EXTENSION_MAPPING =
# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
# to include (a tag file for) the STL sources as input, then you should
# set this tag to YES in order to let doxygen match functions declarations and
# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
# func(std::string) {}). This also makes the inheritance and collaboration
# diagrams that involve STL classes more complete and accurate.
BUILTIN_STL_SUPPORT = NO
# If you use Microsoft's C++/CLI language, you should set this option to YES to
# enable parsing support.
CPP_CLI_SUPPORT = NO
# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
# Doxygen will parse them like normal C++ but will assume all classes use public
# instead of private inheritance when no explicit protection keyword is present.
SIP_SUPPORT = NO
# For Microsoft's IDL there are propget and propput attributes to indicate getter
# and setter methods for a property. Setting this option to YES (the default)
# will make doxygen replace the get and set methods by a property in the
# documentation. This will only work if the methods are indeed getting or
# setting a simple type. If this is not the case, or you want to show the
# methods anyway, you should set this option to NO.
IDL_PROPERTY_SUPPORT = YES
# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
# tag is set to YES, then doxygen will reuse the documentation of the first
# member in the group (if any) for the other members of the group. By default
# all members of a group must be documented explicitly.
DISTRIBUTE_GROUP_DOC = NO
# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
# the same type (for instance a group of public functions) to be put as a
# subgroup of that type (e.g. under the Public Functions section). Set it to
# NO to prevent subgrouping. Alternatively, this can be done per class using
# the \nosubgrouping command.
SUBGROUPING = YES
# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
# is documented as struct, union, or enum with the name of the typedef. So
# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
# with name TypeT. When disabled the typedef will appear as a member of a file,
# namespace, or class. And the struct will be named TypeS. This can typically
# be useful for C code in case the coding convention dictates that all compound
# types are typedef'ed and only the typedef is referenced, never the tag name.
TYPEDEF_HIDES_STRUCT = NO
# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
# determine which symbols to keep in memory and which to flush to disk.
# When the cache is full, less often used symbols will be written to disk.
# For small to medium size projects (<1000 input files) the default value is
# probably good enough. For larger projects a too small cache size can cause
# doxygen to be busy swapping symbols to and from disk most of the time
# causing a significant performance penalty.
# If the system has enough physical memory increasing the cache will improve the
# performance by keeping more symbols in memory. Note that the value works on
# a logarithmic scale so increasing the size by one will roughly double the
# memory usage. The cache size is given by this formula:
# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
# corresponding to a cache size of 2^16 = 65536 symbols
SYMBOL_CACHE_SIZE = 0
#---------------------------------------------------------------------------
# Build related configuration options
#---------------------------------------------------------------------------
# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
# documentation are documented, even if no documentation was available.
# Private class members and static file members will be hidden unless
# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
EXTRACT_ALL = YES
# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
# will be included in the documentation.
EXTRACT_PRIVATE = YES
# If the EXTRACT_STATIC tag is set to YES all static members of a file
# will be included in the documentation.
EXTRACT_STATIC = YES
# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
# defined locally in source files will be included in the documentation.
# If set to NO only classes defined in header files are included.
EXTRACT_LOCAL_CLASSES = YES
# This flag is only useful for Objective-C code. When set to YES local
# methods, which are defined in the implementation section but not in
# the interface are included in the documentation.
# If set to NO (the default) only methods in the interface are included.
EXTRACT_LOCAL_METHODS = NO
# If this flag is set to YES, the members of anonymous namespaces will be
# extracted and appear in the documentation as a namespace called
# 'anonymous_namespace{file}', where file will be replaced with the base
# name of the file that contains the anonymous namespace. By default
# anonymous namespaces are hidden.
EXTRACT_ANON_NSPACES = NO
# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
# undocumented members of documented classes, files or namespaces.
# If set to NO (the default) these members will be included in the
# various overviews, but no documentation section is generated.
# This option has no effect if EXTRACT_ALL is enabled.
HIDE_UNDOC_MEMBERS = NO
# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
# undocumented classes that are normally visible in the class hierarchy.
# If set to NO (the default) these classes will be included in the various
# overviews. This option has no effect if EXTRACT_ALL is enabled.
HIDE_UNDOC_CLASSES = NO
# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
# friend (class|struct|union) declarations.
# If set to NO (the default) these declarations will be included in the
# documentation.
HIDE_FRIEND_COMPOUNDS = NO
# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
# documentation blocks found inside the body of a function.
# If set to NO (the default) these blocks will be appended to the
# function's detailed documentation block.
HIDE_IN_BODY_DOCS = NO
# The INTERNAL_DOCS tag determines if documentation
# that is typed after a \internal command is included. If the tag is set
# to NO (the default) then the documentation will be excluded.
# Set it to YES to include the internal documentation.
INTERNAL_DOCS = NO
# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
# file names in lower-case letters. If set to YES upper-case letters are also
# allowed. This is useful if you have classes or files whose names only differ
# in case and if your file system supports case sensitive file names. Windows
# and Mac users are advised to set this option to NO.
CASE_SENSE_NAMES = YES
# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
# will show members with their full class and namespace scopes in the
# documentation. If set to YES the scope will be hidden.
HIDE_SCOPE_NAMES = NO
# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
# will put a list of the files that are included by a file in the documentation
# of that file.
SHOW_INCLUDE_FILES = YES
# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
# will list include files with double quotes in the documentation
# rather than with sharp brackets.
FORCE_LOCAL_INCLUDES = NO
# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
# is inserted in the documentation for inline members.
INLINE_INFO = YES
# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
# will sort the (detailed) documentation of file and class members
# alphabetically by member name. If set to NO the members will appear in
# declaration order.
SORT_MEMBER_DOCS = YES
# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
# brief documentation of file, namespace and class members alphabetically
# by member name. If set to NO (the default) the members will appear in
# declaration order.
SORT_BRIEF_DOCS = NO
# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
# will sort the (brief and detailed) documentation of class members so that
# constructors and destructors are listed first. If set to NO (the default)
# the constructors will appear in the respective orders defined by
# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
SORT_MEMBERS_CTORS_1ST = NO
# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
# hierarchy of group names into alphabetical order. If set to NO (the default)
# the group names will appear in their defined order.
SORT_GROUP_NAMES = NO
# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
# sorted by fully-qualified names, including namespaces. If set to
# NO (the default), the class list will be sorted only by class name,
# not including the namespace part.
# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
# Note: This option applies only to the class list, not to the
# alphabetical list.
SORT_BY_SCOPE_NAME = NO
# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper type resolution of all parameters of a function it will reject a
# match between the prototype and the implementation of a member function even if there is only one candidate or it is obvious which candidate to choose by doing a simple string match. By disabling STRICT_PROTO_MATCHING doxygen
# will still accept a match between prototype and implementation in such cases.
STRICT_PROTO_MATCHING = NO
# The GENERATE_TODOLIST tag can be used to enable (YES) or
# disable (NO) the todo list. This list is created by putting \todo
# commands in the documentation.
GENERATE_TODOLIST = YES
# The GENERATE_TESTLIST tag can be used to enable (YES) or
# disable (NO) the test list. This list is created by putting \test
# commands in the documentation.
GENERATE_TESTLIST = YES
# The GENERATE_BUGLIST tag can be used to enable (YES) or
# disable (NO) the bug list. This list is created by putting \bug
# commands in the documentation.
GENERATE_BUGLIST = YES
# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
# disable (NO) the deprecated list. This list is created by putting
# \deprecated commands in the documentation.
GENERATE_DEPRECATEDLIST= YES
# The ENABLED_SECTIONS tag can be used to enable conditional
# documentation sections, marked by \if sectionname ... \endif.
ENABLED_SECTIONS =
# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
# the initial value of a variable or macro consists of for it to appear in
# the documentation. If the initializer consists of more lines than specified
# here it will be hidden. Use a value of 0 to hide initializers completely.
# The appearance of the initializer of individual variables and macros in the
# documentation can be controlled using \showinitializer or \hideinitializer
# command in the documentation regardless of this setting.
MAX_INITIALIZER_LINES = 30
# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
# at the bottom of the documentation of classes and structs. If set to YES the
# list will mention the files that were used to generate the documentation.
SHOW_USED_FILES = YES
# If the sources in your project are distributed over multiple directories
# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
# in the documentation. The default is NO.
SHOW_DIRECTORIES = NO
# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
# This will remove the Files entry from the Quick Index and from the
# Folder Tree View (if specified). The default is YES.
SHOW_FILES = YES
# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
# Namespaces page.
# This will remove the Namespaces entry from the Quick Index
# and from the Folder Tree View (if specified). The default is YES.
SHOW_NAMESPACES = YES
# The FILE_VERSION_FILTER tag can be used to specify a program or script that
# doxygen should invoke to get the current version for each file (typically from
# the version control system). Doxygen will invoke the program by executing (via
# popen()) the command , where is the value of
# the FILE_VERSION_FILTER tag, and is the name of an input file
# provided by doxygen. Whatever the program writes to standard output
# is used as the file version. See the manual for examples.
FILE_VERSION_FILTER =
# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
# by doxygen. The layout file controls the global structure of the generated
# output files in an output format independent way. The create the layout file
# that represents doxygen's defaults, run doxygen with the -l option.
# You can optionally specify a file name after the option, if omitted
# DoxygenLayout.xml will be used as the name of the layout file.
LAYOUT_FILE =
#---------------------------------------------------------------------------
# configuration options related to warning and progress messages
#---------------------------------------------------------------------------
# The QUIET tag can be used to turn on/off the messages that are generated
# by doxygen. Possible values are YES and NO. If left blank NO is used.
QUIET = NO
# The WARNINGS tag can be used to turn on/off the warning messages that are
# generated by doxygen. Possible values are YES and NO. If left blank
# NO is used.
WARNINGS = YES
# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
# automatically be disabled.
WARN_IF_UNDOCUMENTED = YES
# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
# potential errors in the documentation, such as not documenting some
# parameters in a documented function, or documenting parameters that
# don't exist or using markup commands wrongly.
WARN_IF_DOC_ERROR = YES
# The WARN_NO_PARAMDOC option can be enabled to get warnings for
# functions that are documented, but have no documentation for their parameters
# or return value. If set to NO (the default) doxygen will only warn about
# wrong or incomplete parameter documentation, but not about the absence of
# documentation.
WARN_NO_PARAMDOC = NO
# The WARN_FORMAT tag determines the format of the warning messages that
# doxygen can produce. The string should contain the $file, $line, and $text
# tags, which will be replaced by the file and line number from which the
# warning originated and the warning text. Optionally the format may contain
# $version, which will be replaced by the version of the file (if it could
# be obtained via FILE_VERSION_FILTER)
WARN_FORMAT = "$file:$line: $text"
# The WARN_LOGFILE tag can be used to specify a file to which warning
# and error messages should be written. If left blank the output is written
# to stderr.
WARN_LOGFILE =
#---------------------------------------------------------------------------
# configuration options related to the input files
#---------------------------------------------------------------------------
# The INPUT tag can be used to specify the files and/or directories that contain
# documented source files. You may enter file names like "myfile.cpp" or
# directories like "/usr/src/myproject". Separate the files or directories
# with spaces.
INPUT = ../../src/lib
# This tag can be used to specify the character encoding of the source files
# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
# also the default input encoding. Doxygen uses libiconv (or the iconv built
# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
# the list of possible encodings.
INPUT_ENCODING = UTF-8
# If the value of the INPUT tag contains directories, you can use the
# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
# and *.h) to filter out the source-files in the directories. If left
# blank the following patterns are tested:
# *.c *.cc *.cxx *.cpp *.c++ *.d *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh
# *.hxx *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.dox *.py
# *.f90 *.f *.for *.vhd *.vhdl
FILE_PATTERNS = *.cpp \
*.h
# The RECURSIVE tag can be used to turn specify whether or not subdirectories
# should be searched for input files as well. Possible values are YES and NO.
# If left blank NO is used.
RECURSIVE = yes
# The EXCLUDE tag can be used to specify files and/or directories that should
# excluded from the INPUT source files. This way you can easily exclude a
# subdirectory from a directory tree whose root is specified with the INPUT tag.
EXCLUDE =
# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
# directories that are symbolic links (a Unix file system feature) are excluded
# from the input.
EXCLUDE_SYMLINKS = NO
# If the value of the INPUT tag contains directories, you can use the
# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
# certain files from those directories. Note that the wildcards are matched
# against the file with absolute path, so to exclude all test directories
# for example use the pattern */test/*
EXCLUDE_PATTERNS =
# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
# (namespaces, classes, functions, etc.) that should be excluded from the
# output. The symbol name can be a fully qualified name, a word, or if the
# wildcard * is used, a substring. Examples: ANamespace, AClass,
# AClass::ANamespace, ANamespace::*Test
EXCLUDE_SYMBOLS =
# The EXAMPLE_PATH tag can be used to specify one or more files or
# directories that contain example code fragments that are included (see
# the \include command).
EXAMPLE_PATH =
# If the value of the EXAMPLE_PATH tag contains directories, you can use the
# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
# and *.h) to filter out the source-files in the directories. If left
# blank all files are included.
EXAMPLE_PATTERNS =
# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
# searched for input files to be used with the \include or \dontinclude
# commands irrespective of the value of the RECURSIVE tag.
# Possible values are YES and NO. If left blank NO is used.
EXAMPLE_RECURSIVE = YES
# The IMAGE_PATH tag can be used to specify one or more files or
# directories that contain image that are included in the documentation (see
# the \image command).
IMAGE_PATH =
# The INPUT_FILTER tag can be used to specify a program that doxygen should
# invoke to filter for each input file. Doxygen will invoke the filter program
# by executing (via popen()) the command , where
# is the value of the INPUT_FILTER tag, and is the name of an
# input file. Doxygen will then use the output that the filter program writes
# to standard output.
# If FILTER_PATTERNS is specified, this tag will be
# ignored.
INPUT_FILTER =
# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
# basis.
# Doxygen will compare the file name with each pattern and apply the
# filter if there is a match.
# The filters are a list of the form:
# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
# info on how filters are used. If FILTER_PATTERNS is empty or if
# non of the patterns match the file name, INPUT_FILTER is applied.
FILTER_PATTERNS =
# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
# INPUT_FILTER) will be used to filter the input files when producing source
# files to browse (i.e. when SOURCE_BROWSER is set to YES).
FILTER_SOURCE_FILES = NO
# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
# pattern. A pattern will override the setting for FILTER_PATTERN (if any)
# and it is also possible to disable source filtering for a specific pattern
# using *.ext= (so without naming a filter). This option only has effect when
# FILTER_SOURCE_FILES is enabled.
FILTER_SOURCE_PATTERNS =
#---------------------------------------------------------------------------
# configuration options related to source browsing
#---------------------------------------------------------------------------
# If the SOURCE_BROWSER tag is set to YES then a list of source files will
# be generated. Documented entities will be cross-referenced with these sources.
# Note: To get rid of all source code in the generated output, make sure also
# VERBATIM_HEADERS is set to NO.
SOURCE_BROWSER = NO
# Setting the INLINE_SOURCES tag to YES will include the body
# of functions and classes directly in the documentation.
INLINE_SOURCES = NO
# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
# doxygen to hide any special comment blocks from generated source code
# fragments. Normal C and C++ comments will always remain visible.
STRIP_CODE_COMMENTS = YES
# If the REFERENCED_BY_RELATION tag is set to YES
# then for each documented function all documented
# functions referencing it will be listed.
REFERENCED_BY_RELATION = YES
# If the REFERENCES_RELATION tag is set to YES
# then for each documented function all documented entities
# called/used by that function will be listed.
REFERENCES_RELATION = NO
# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
# link to the source code.
# Otherwise they will link to the documentation.
REFERENCES_LINK_SOURCE = YES
# If the USE_HTAGS tag is set to YES then the references to source code
# will point to the HTML generated by the htags(1) tool instead of doxygen
# built-in source browser. The htags tool is part of GNU's global source
# tagging system (see http://www.gnu.org/software/global/global.html). You
# will need version 4.8.6 or higher.
USE_HTAGS = NO
# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
# will generate a verbatim copy of the header file for each class for
# which an include is specified. Set to NO to disable this.
VERBATIM_HEADERS = YES
#---------------------------------------------------------------------------
# configuration options related to the alphabetical class index
#---------------------------------------------------------------------------
# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
# of all compounds will be generated. Enable this if the project
# contains a lot of classes, structs, unions or interfaces.
ALPHABETICAL_INDEX = YES
# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
# in which this list will be split (can be a number in the range [1..20])
COLS_IN_ALPHA_INDEX = 3
# In case all classes in a project start with a common prefix, all
# classes will be put under the same header in the alphabetical index.
# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
# should be ignored while generating the index headers.
IGNORE_PREFIX =
#---------------------------------------------------------------------------
# configuration options related to the HTML output
#---------------------------------------------------------------------------
# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
# generate HTML output.
GENERATE_HTML = YES
# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
# If a relative path is entered the value of OUTPUT_DIRECTORY will be
# put in front of it. If left blank `html' will be used as the default path.
HTML_OUTPUT = html
# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
# doxygen will generate files with .html extension.
HTML_FILE_EXTENSION = .html
# The HTML_HEADER tag can be used to specify a personal HTML header for
# each generated HTML page. If it is left blank doxygen will generate a
# standard header.
HTML_HEADER = header.html.in
# The HTML_FOOTER tag can be used to specify a personal HTML footer for
# each generated HTML page. If it is left blank doxygen will generate a
# standard footer.
HTML_FOOTER = footer.html.in
# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
# style sheet that is used by each HTML page. It can be used to
# fine-tune the look of the HTML output. If the tag is left blank doxygen
# will generate a default style sheet. Note that doxygen will try to copy
# the style sheet file to the HTML output directory, so don't put your own
# stylesheet in the HTML output directory as well, or it will be erased!
HTML_STYLESHEET =
# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
# Doxygen will adjust the colors in the stylesheet and background images
# according to this color. Hue is specified as an angle on a colorwheel,
# see http://en.wikipedia.org/wiki/Hue for more information.
# For instance the value 0 represents red, 60 is yellow, 120 is green,
# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
# The allowed range is 0 to 359.
HTML_COLORSTYLE_HUE = 220
# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
# the colors in the HTML output. For a value of 0 the output will use
# grayscales only. A value of 255 will produce the most vivid colors.
HTML_COLORSTYLE_SAT = 100
# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
# the luminance component of the colors in the HTML output. Values below
# 100 gradually make the output lighter, whereas values above 100 make
# the output darker. The value divided by 100 is the actual gamma applied,
# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
# and 100 does not change the gamma.
HTML_COLORSTYLE_GAMMA = 80
# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
# page will contain the date and time when the page was generated. Setting
# this to NO can help when comparing the output of multiple runs.
HTML_TIMESTAMP = NO
# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
# files or namespaces will be aligned in HTML using tables. If set to
# NO a bullet list will be used.
HTML_ALIGN_MEMBERS = YES
# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
# documentation will contain sections that can be hidden and shown after the
# page has loaded. For this to work a browser that supports
# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
HTML_DYNAMIC_SECTIONS = NO
# If the GENERATE_DOCSET tag is set to YES, additional index files
# will be generated that can be used as input for Apple's Xcode 3
# integrated development environment, introduced with OSX 10.5 (Leopard).
# To create a documentation set, doxygen will generate a Makefile in the
# HTML output directory. Running make will produce the docset in that
# directory and running "make install" will install the docset in
# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
# it at startup.
# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
# for more information.
GENERATE_DOCSET = NO
# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
# feed. A documentation feed provides an umbrella under which multiple
# documentation sets from a single provider (such as a company or product suite)
# can be grouped.
DOCSET_FEEDNAME = "Doxygen generated docs"
# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
# should uniquely identify the documentation set bundle. This should be a
# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
# will append .docset to the name.
DOCSET_BUNDLE_ID = org.doxygen.Project
# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
# the documentation publisher. This should be a reverse domain-name style
# string, e.g. com.mycompany.MyDocSet.documentation.
DOCSET_PUBLISHER_ID = org.doxygen.Publisher
# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
DOCSET_PUBLISHER_NAME = Publisher
# If the GENERATE_HTMLHELP tag is set to YES, additional index files
# will be generated that can be used as input for tools like the
# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
# of the generated HTML documentation.
GENERATE_HTMLHELP = NO
# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
# be used to specify the file name of the resulting .chm file. You
# can add a path in front of the file if the result should not be
# written to the html output directory.
CHM_FILE =
# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
# be used to specify the location (absolute path including file name) of
# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
# the HTML help compiler on the generated index.hhp.
HHC_LOCATION =
# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
# controls if a separate .chi index file is generated (YES) or that
# it should be included in the master .chm file (NO).
GENERATE_CHI = NO
# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
# is used to encode HtmlHelp index (hhk), content (hhc) and project file
# content.
CHM_INDEX_ENCODING =
# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
# controls whether a binary table of contents is generated (YES) or a
# normal table of contents (NO) in the .chm file.
BINARY_TOC = NO
# The TOC_EXPAND flag can be set to YES to add extra items for group members
# to the contents of the HTML help documentation and to the tree view.
TOC_EXPAND = NO
# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
# that can be used as input for Qt's qhelpgenerator to generate a
# Qt Compressed Help (.qch) of the generated HTML documentation.
GENERATE_QHP = NO
# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
# be used to specify the file name of the resulting .qch file.
# The path specified is relative to the HTML output folder.
QCH_FILE =
# The QHP_NAMESPACE tag specifies the namespace to use when generating
# Qt Help Project output. For more information please see
# http://doc.trolltech.com/qthelpproject.html#namespace
QHP_NAMESPACE = org.doxygen.Project
# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
# Qt Help Project output. For more information please see
# http://doc.trolltech.com/qthelpproject.html#virtual-folders
QHP_VIRTUAL_FOLDER = doc
# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
# add. For more information please see
# http://doc.trolltech.com/qthelpproject.html#custom-filters
QHP_CUST_FILTER_NAME =
# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
# custom filter to add. For more information please see
#
# Qt Help Project / Custom Filters.
QHP_CUST_FILTER_ATTRS =
# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
# project's
# filter section matches.
#
# Qt Help Project / Filter Attributes.
QHP_SECT_FILTER_ATTRS =
# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
# be used to specify the location of Qt's qhelpgenerator.
# If non-empty doxygen will try to run qhelpgenerator on the generated
# .qhp file.
QHG_LOCATION =
# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
# will be generated, which together with the HTML files, form an Eclipse help
# plugin. To install this plugin and make it available under the help contents
# menu in Eclipse, the contents of the directory containing the HTML and XML
# files needs to be copied into the plugins directory of eclipse. The name of
# the directory within the plugins directory should be the same as
# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
# the help appears.
GENERATE_ECLIPSEHELP = NO
# A unique identifier for the eclipse help plugin. When installing the plugin
# the directory name containing the HTML and XML files should also have
# this name.
ECLIPSE_DOC_ID = org.doxygen.Project
# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
# top of each HTML page. The value NO (the default) enables the index and
# the value YES disables it.
DISABLE_INDEX = NO
# This tag can be used to set the number of enum values (range [0,1..20])
# that doxygen will group on one line in the generated HTML documentation.
# Note that a value of 0 will completely suppress the enum values from appearing in the overview section.
ENUM_VALUES_PER_LINE = 4
# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
# structure should be generated to display hierarchical information.
# If the tag value is set to YES, a side panel will be generated
# containing a tree-like index structure (just like the one that
# is generated for HTML Help). For this to work a browser that supports
# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
# Windows users are probably better off using the HTML help feature.
GENERATE_TREEVIEW = YES
# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
# and Class Hierarchy pages using a tree view instead of an ordered list.
USE_INLINE_TREES = NO
# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
# used to set the initial width (in pixels) of the frame in which the tree
# is shown.
TREEVIEW_WIDTH = 250
# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
# links to external symbols imported via tag files in a separate window.
EXT_LINKS_IN_WINDOW = NO
# Use this tag to change the font size of Latex formulas included
# as images in the HTML documentation. The default is 10. Note that
# when you change the font size after a successful doxygen run you need
# to manually remove any form_*.png images from the HTML output directory
# to force them to be regenerated.
FORMULA_FONTSIZE = 10
# Use the FORMULA_TRANPARENT tag to determine whether or not the images
# generated for formulas are transparent PNGs. Transparent PNGs are
# not supported properly for IE 6.0, but are supported on all modern browsers.
# Note that when changing this option you need to delete any form_*.png files
# in the HTML output before the changes have effect.
FORMULA_TRANSPARENT = YES
# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax
# (see http://www.mathjax.org) which uses client side Javascript for the
# rendering instead of using prerendered bitmaps. Use this if you do not
# have LaTeX installed or if you want to formulas look prettier in the HTML
# output. When enabled you also need to install MathJax separately and
# configure the path to it using the MATHJAX_RELPATH option.
USE_MATHJAX = NO
# When MathJax is enabled you need to specify the location relative to the
# HTML output directory using the MATHJAX_RELPATH option. The destination
# directory should contain the MathJax.js script. For instance, if the mathjax
# directory is located at the same level as the HTML output directory, then
# MATHJAX_RELPATH should be ../mathjax. The default value points to the mathjax.org site, so you can quickly see the result without installing
# MathJax, but it is strongly recommended to install a local copy of MathJax
# before deployment.
MATHJAX_RELPATH = http://www.mathjax.org/mathjax
# When the SEARCHENGINE tag is enabled doxygen will generate a search box
# for the HTML output. The underlying search engine uses javascript
# and DHTML and should work on any modern browser. Note that when using
# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
# (GENERATE_DOCSET) there is already a search function so this one should
# typically be disabled. For large projects the javascript based search engine
# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
SEARCHENGINE = NO
# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
# implemented using a PHP enabled web server instead of at the web client
# using Javascript. Doxygen will generate the search PHP script and index
# file to put on the web server. The advantage of the server
# based approach is that it scales better to large projects and allows
# full text search. The disadvantages are that it is more difficult to setup
# and does not have live searching capabilities.
SERVER_BASED_SEARCH = NO
#---------------------------------------------------------------------------
# configuration options related to the LaTeX output
#---------------------------------------------------------------------------
# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
# generate Latex output.
GENERATE_LATEX = NO
# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
# If a relative path is entered the value of OUTPUT_DIRECTORY will be
# put in front of it. If left blank `latex' will be used as the default path.
LATEX_OUTPUT = latex
# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
# invoked. If left blank `latex' will be used as the default command name.
# Note that when enabling USE_PDFLATEX this option is only used for
# generating bitmaps for formulas in the HTML output, but not in the
# Makefile that is written to the output directory.
LATEX_CMD_NAME = latex
# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
# generate index for LaTeX. If left blank `makeindex' will be used as the
# default command name.
MAKEINDEX_CMD_NAME = makeindex
# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
# LaTeX documents. This may be useful for small projects and may help to
# save some trees in general.
COMPACT_LATEX = NO
# The PAPER_TYPE tag can be used to set the paper type that is used
# by the printer. Possible values are: a4, letter, legal and
# executive. If left blank a4wide will be used.
PAPER_TYPE = a4wide
# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
# packages that should be included in the LaTeX output.
EXTRA_PACKAGES =
# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
# the generated latex document. The header should contain everything until
# the first chapter. If it is left blank doxygen will generate a
# standard header. Notice: only use this tag if you know what you are doing!
LATEX_HEADER =
# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
# is prepared for conversion to pdf (using ps2pdf). The pdf file will
# contain links (just like the HTML output) instead of page references
# This makes the output suitable for online browsing using a pdf viewer.
PDF_HYPERLINKS = NO
# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
# plain latex in the generated Makefile. Set this option to YES to get a
# higher quality PDF documentation.
USE_PDFLATEX = NO
# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
# command to the generated LaTeX files. This will instruct LaTeX to keep
# running if errors occur, instead of asking the user for help.
# This option is also used when generating formulas in HTML.
LATEX_BATCHMODE = NO
# If LATEX_HIDE_INDICES is set to YES then doxygen will not
# include the index chapters (such as File Index, Compound Index, etc.)
# in the output.
LATEX_HIDE_INDICES = NO
# If LATEX_SOURCE_CODE is set to YES then doxygen will include
# source code with syntax highlighting in the LaTeX output.
# Note that which sources are shown also depends on other settings
# such as SOURCE_BROWSER.
LATEX_SOURCE_CODE = NO
#---------------------------------------------------------------------------
# configuration options related to the RTF output
#---------------------------------------------------------------------------
# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
# The RTF output is optimized for Word 97 and may not look very pretty with
# other RTF readers or editors.
GENERATE_RTF = NO
# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
# If a relative path is entered the value of OUTPUT_DIRECTORY will be
# put in front of it. If left blank `rtf' will be used as the default path.
RTF_OUTPUT = rtf
# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
# RTF documents. This may be useful for small projects and may help to
# save some trees in general.
COMPACT_RTF = NO
# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
# will contain hyperlink fields. The RTF file will
# contain links (just like the HTML output) instead of page references.
# This makes the output suitable for online browsing using WORD or other
# programs which support those fields.
# Note: wordpad (write) and others do not support links.
RTF_HYPERLINKS = NO
# Load stylesheet definitions from file. Syntax is similar to doxygen's
# config file, i.e. a series of assignments. You only have to provide
# replacements, missing definitions are set to their default value.
RTF_STYLESHEET_FILE =
# Set optional variables used in the generation of an rtf document.
# Syntax is similar to doxygen's config file.
RTF_EXTENSIONS_FILE =
#---------------------------------------------------------------------------
# configuration options related to the man page output
#---------------------------------------------------------------------------
# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
# generate man pages
GENERATE_MAN = NO
# The MAN_OUTPUT tag is used to specify where the man pages will be put.
# If a relative path is entered the value of OUTPUT_DIRECTORY will be
# put in front of it. If left blank `man' will be used as the default path.
MAN_OUTPUT = man
# The MAN_EXTENSION tag determines the extension that is added to
# the generated man pages (default is the subroutine's section .3)
MAN_EXTENSION = .3
# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
# then it will generate one additional man file for each entity
# documented in the real man page(s). These additional files
# only source the real man page, but without them the man command
# would be unable to find the correct page. The default is NO.
MAN_LINKS = NO
#---------------------------------------------------------------------------
# configuration options related to the XML output
#---------------------------------------------------------------------------
# If the GENERATE_XML tag is set to YES Doxygen will
# generate an XML file that captures the structure of
# the code including all documentation.
GENERATE_XML = NO
# The XML_OUTPUT tag is used to specify where the XML pages will be put.
# If a relative path is entered the value of OUTPUT_DIRECTORY will be
# put in front of it. If left blank `xml' will be used as the default path.
XML_OUTPUT = xml
# The XML_SCHEMA tag can be used to specify an XML schema,
# which can be used by a validating XML parser to check the
# syntax of the XML files.
XML_SCHEMA =
# The XML_DTD tag can be used to specify an XML DTD,
# which can be used by a validating XML parser to check the
# syntax of the XML files.
XML_DTD =
# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
# dump the program listings (including syntax highlighting
# and cross-referencing information) to the XML output. Note that
# enabling this will significantly increase the size of the XML output.
XML_PROGRAMLISTING = YES
#---------------------------------------------------------------------------
# configuration options for the AutoGen Definitions output
#---------------------------------------------------------------------------
# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
# generate an AutoGen Definitions (see autogen.sf.net) file
# that captures the structure of the code including all
# documentation. Note that this feature is still experimental
# and incomplete at the moment.
GENERATE_AUTOGEN_DEF = NO
#---------------------------------------------------------------------------
# configuration options related to the Perl module output
#---------------------------------------------------------------------------
# If the GENERATE_PERLMOD tag is set to YES Doxygen will
# generate a Perl module file that captures the structure of
# the code including all documentation. Note that this
# feature is still experimental and incomplete at the
# moment.
GENERATE_PERLMOD = NO
# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
# the necessary Makefile rules, Perl scripts and LaTeX code to be able
# to generate PDF and DVI output from the Perl module output.
PERLMOD_LATEX = NO
# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
# nicely formatted so it can be parsed by a human reader.
# This is useful
# if you want to understand what is going on.
# On the other hand, if this
# tag is set to NO the size of the Perl module output will be much smaller
# and Perl will parse it just the same.
PERLMOD_PRETTY = YES
# The names of the make variables in the generated doxyrules.make file
# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
# This is useful so different doxyrules.make files included by the same
# Makefile don't overwrite each other's variables.
PERLMOD_MAKEVAR_PREFIX =
#---------------------------------------------------------------------------
# Configuration options related to the preprocessor
#---------------------------------------------------------------------------
# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
# evaluate all C-preprocessor directives found in the sources and include
# files.
ENABLE_PREPROCESSING = YES
# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
# names in the source code. If set to NO (the default) only conditional
# compilation will be performed. Macro expansion can be done in a controlled
# way by setting EXPAND_ONLY_PREDEF to YES.
MACRO_EXPANSION = NO
# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
# then the macro expansion is limited to the macros specified with the
# PREDEFINED and EXPAND_AS_DEFINED tags.
EXPAND_ONLY_PREDEF = NO
# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
# in the INCLUDE_PATH (see below) will be search if a #include is found.
SEARCH_INCLUDES = YES
# The INCLUDE_PATH tag can be used to specify one or more directories that
# contain include files that are not input files but should be processed by
# the preprocessor.
INCLUDE_PATH =
# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
# patterns (like *.h and *.hpp) to filter out the header-files in the
# directories. If left blank, the patterns specified with FILE_PATTERNS will
# be used.
INCLUDE_FILE_PATTERNS =
# The PREDEFINED tag can be used to specify one or more macro names that
# are defined before the preprocessor is started (similar to the -D option of
# gcc). The argument of the tag is a list of macros of the form: name
# or name=definition (no spaces). If the definition and the = are
# omitted =1 is assumed. To prevent a macro definition from being
# undefined via #undef or recursively expanded use the := operator
# instead of the = operator.
PREDEFINED =
# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
# this tag can be used to specify a list of macro names that should be expanded.
# The macro definition that is found in the sources will be used.
# Use the PREDEFINED tag if you want to use a different macro definition that overrules the definition found in the source code.
EXPAND_AS_DEFINED =
# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
# doxygen's preprocessor will remove all references to function-like macros
# that are alone on a line, have an all uppercase name, and do not end with a
# semicolon, because these will confuse the parser if not removed.
SKIP_FUNCTION_MACROS = YES
#---------------------------------------------------------------------------
# Configuration::additions related to external references
#---------------------------------------------------------------------------
# The TAGFILES option can be used to specify one or more tagfiles.
# Optionally an initial location of the external documentation
# can be added for each tagfile. The format of a tag file without
# this location is as follows:
#
# TAGFILES = file1 file2 ...
# Adding location for the tag files is done as follows:
#
# TAGFILES = file1=loc1 "file2 = loc2" ...
# where "loc1" and "loc2" can be relative or absolute paths or
# URLs. If a location is present for each tag, the installdox tool
# does not have to be run to correct the links.
# Note that each tag file must have a unique name
# (where the name does NOT include the path)
# If a tag file is not located in the directory in which doxygen
# is run, you must also specify the path to the tagfile here.
TAGFILES =
# When a file name is specified after GENERATE_TAGFILE, doxygen will create
# a tag file that is based on the input files it reads.
GENERATE_TAGFILE =
# If the ALLEXTERNALS tag is set to YES all external classes will be listed
# in the class index. If set to NO only the inherited external classes
# will be listed.
ALLEXTERNALS = NO
# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
# in the modules index. If set to NO, only the current project's groups will
# be listed.
EXTERNAL_GROUPS = YES
# The PERL_PATH should be the absolute path and name of the perl script
# interpreter (i.e. the result of `which perl').
PERL_PATH = /usr/bin/perl
#---------------------------------------------------------------------------
# Configuration options related to the dot tool
#---------------------------------------------------------------------------
# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
# or super classes. Setting the tag to NO turns the diagrams off. Note that
# this option also works with HAVE_DOT disabled, but it is recommended to
# install and use dot, since it yields more powerful graphs.
CLASS_DIAGRAMS = YES
# You can define message sequence charts within doxygen comments using the \msc
# command. Doxygen will then run the mscgen tool (see
# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
# documentation. The MSCGEN_PATH tag allows you to specify the directory where
# the mscgen tool resides. If left empty the tool is assumed to be found in the
# default search path.
MSCGEN_PATH =
# If set to YES, the inheritance and collaboration graphs will hide
# inheritance and usage relations if the target is undocumented
# or is not a class.
HIDE_UNDOC_RELATIONS = YES
# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
# available from the path. This tool is part of Graphviz, a graph visualization
# toolkit from AT&T and Lucent Bell Labs. The other options in this section
# have no effect if this option is set to NO (the default)
HAVE_DOT = NO
# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
# allowed to run in parallel. When set to 0 (the default) doxygen will
# base this on the number of processors available in the system. You can set it
# explicitly to a value larger than 0 to get control over the balance
# between CPU load and processing speed.
DOT_NUM_THREADS = 0
# By default doxygen will write a font called Helvetica to the output
# directory and reference it in all dot files that doxygen generates.
# When you want a differently looking font you can specify the font name
# using DOT_FONTNAME. You need to make sure dot is able to find the font,
# which can be done by putting it in a standard location or by setting the
# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
# containing the font.
DOT_FONTNAME = Helvetica
# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
# The default size is 10pt.
DOT_FONTSIZE = 10
# By default doxygen will tell dot to use the output directory to look for the
# FreeSans.ttf font (which doxygen will put there itself). If you specify a
# different font using DOT_FONTNAME you can set the path where dot
# can find it using this tag.
DOT_FONTPATH =
# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
# will generate a graph for each documented class showing the direct and
# indirect inheritance relations. Setting this tag to YES will force the
# the CLASS_DIAGRAMS tag to NO.
CLASS_GRAPH = YES
# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
# will generate a graph for each documented class showing the direct and
# indirect implementation dependencies (inheritance, containment, and
# class references variables) of the class with other documented classes.
COLLABORATION_GRAPH = YES
# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
# will generate a graph for groups, showing the direct groups dependencies
GROUP_GRAPHS = YES
# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
# collaboration diagrams in a style similar to the OMG's Unified Modeling
# Language.
UML_LOOK = NO
# If set to YES, the inheritance and collaboration graphs will show the
# relations between templates and their instances.
TEMPLATE_RELATIONS = NO
# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
# tags are set to YES then doxygen will generate a graph for each documented
# file showing the direct and indirect include dependencies of the file with
# other documented files.
INCLUDE_GRAPH = YES
# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
# documented header file showing the documented files that directly or
# indirectly include this file.
INCLUDED_BY_GRAPH = YES
# If the CALL_GRAPH and HAVE_DOT options are set to YES then
# doxygen will generate a call dependency graph for every global function
# or class method. Note that enabling this option will significantly increase
# the time of a run. So in most cases it will be better to enable call graphs
# for selected functions only using the \callgraph command.
CALL_GRAPH = NO
# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
# doxygen will generate a caller dependency graph for every global function
# or class method. Note that enabling this option will significantly increase
# the time of a run. So in most cases it will be better to enable caller
# graphs for selected functions only using the \callergraph command.
CALLER_GRAPH = NO
# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
# will generate a graphical hierarchy of all classes instead of a textual one.
GRAPHICAL_HIERARCHY = YES
# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
# then doxygen will show the dependencies a directory has on other directories
# in a graphical way. The dependency relations are determined by the #include
# relations between the files in the directories.
DIRECTORY_GRAPH = YES
# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
# generated by dot. Possible values are png, svg, gif or svg.
# If left blank png will be used.
DOT_IMAGE_FORMAT = png
# The tag DOT_PATH can be used to specify the path where the dot tool can be
# found. If left blank, it is assumed the dot tool can be found in the path.
DOT_PATH =
# The DOTFILE_DIRS tag can be used to specify one or more directories that
# contain dot files that are included in the documentation (see the
# \dotfile command).
DOTFILE_DIRS =
# The MSCFILE_DIRS tag can be used to specify one or more directories that
# contain msc files that are included in the documentation (see the
# \mscfile command).
MSCFILE_DIRS =
# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
# nodes that will be shown in the graph. If the number of nodes in a graph
# becomes larger than this value, doxygen will truncate the graph, which is
# visualized by representing a node as a red box. Note that doxygen if the
# number of direct children of the root node in a graph is already larger than
# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
DOT_GRAPH_MAX_NODES = 50
# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
# graphs generated by dot. A depth value of 3 means that only nodes reachable
# from the root by following a path via at most 3 edges will be shown. Nodes
# that lay further from the root node will be omitted. Note that setting this
# option to 1 or 2 may greatly reduce the computation time needed for large
# code bases. Also note that the size of a graph can be further restricted by
# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
MAX_DOT_GRAPH_DEPTH = 0
# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
# background. This is disabled by default, because dot on Windows does not
# seem to support this out of the box. Warning: Depending on the platform used,
# enabling this option may lead to badly anti-aliased labels on the edges of
# a graph (i.e. they become hard to read).
DOT_TRANSPARENT = NO
# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
# files in one run (i.e. multiple -o and -T options on the command line). This
# makes dot run faster, but since only newer versions of dot (>1.8.10)
# support this, this feature is disabled by default.
DOT_MULTI_TARGETS = NO
# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
# generate a legend page explaining the meaning of the various boxes and
# arrows in the dot generated graphs.
GENERATE_LEGEND = YES
# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
# remove the intermediate dot files that are used to generate
# the various graphs.
DOT_CLEANUP = YES
libetonyek-0.0.3/docs/doxygen/Makefile.am 0000664 0001750 0001750 00000001120 12250351501 016116 0 ustar jr jr EXTRA_DIST = doxygen.cfg \
footer.html.in \
header.html.in
if WITH_LIBETONYEK_DOCS
install-data-am:
mkdir -p $(DESTDIR)$(docdir)/html
$(INSTALL_DATA) html/*.html $(DESTDIR)$(docdir)/html/
$(INSTALL_DATA) html/*.png $(DESTDIR)$(docdir)/html/
$(INSTALL_DATA) html/*.css $(DESTDIR)$(docdir)/html/
uninstall-am:
-rm -rf $(DESTDIR)$(docdir)/html
all:
test -f header.html.in || $(LN_S) $(srcdir)/header.html.in ./
test -f footer.html.in || $(LN_S) $(srcdir)/footer.html.in ./
doxygen $(srcdir)/doxygen.cfg
else
all:
endif
distclean-local: clean-local
clean-local:
rm -rf html
libetonyek-0.0.3/docs/doxygen/.gitignore 0000664 0001750 0001750 00000000032 12250351501 016053 0 ustar jr jr Makefile
Makefile.in
html
libetonyek-0.0.3/docs/doxygen/footer.html.in 0000664 0001750 0001750 00000000275 12250351501 016665 0 ustar jr jr
Generated for $projectname by
doxygen $doxygenversion
libetonyek-0.0.3/docs/doxygen/Makefile.in 0000664 0001750 0001750 00000032753 12270445763 016167 0 ustar jr jr # Makefile.in generated by automake 1.14.1 from Makefile.am.
# @configure_input@
# Copyright (C) 1994-2013 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
VPATH = @srcdir@
am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
*) echo "am__make_running_with_option: internal error: invalid" \
"target option '$${target_option-}' specified" >&2; \
exit 1;; \
esac; \
has_opt=no; \
sane_makeflags=$$MAKEFLAGS; \
if $(am__is_gnu_make); then \
sane_makeflags=$$MFLAGS; \
else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
bs=\\; \
sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
| sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
fi; \
skip_next=no; \
strip_trailopt () \
{ \
flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
}; \
for flg in $$sane_makeflags; do \
test $$skip_next = yes && { skip_next=no; continue; }; \
case $$flg in \
*=*|--*) continue;; \
-*I) strip_trailopt 'I'; skip_next=yes;; \
-*I?*) strip_trailopt 'I';; \
-*O) strip_trailopt 'O'; skip_next=yes;; \
-*O?*) strip_trailopt 'O';; \
-*l) strip_trailopt 'l'; skip_next=yes;; \
-*l?*) strip_trailopt 'l';; \
-[dEDm]) skip_next=yes;; \
-[JT]) skip_next=yes;; \
esac; \
case $$flg in \
*$$target_option*) has_opt=yes; break;; \
esac; \
done; \
test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
subdir = docs/doxygen
DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/ax_boost_base.m4 \
$(top_srcdir)/m4/ax_boost_filesystem.m4 \
$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo " GEN " $@;
am__v_GEN_1 =
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 =
SOURCES =
DIST_SOURCES =
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AS = @AS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BOOST_CFLAGS = @BOOST_CFLAGS@
BOOST_CPPFLAGS = @BOOST_CPPFLAGS@
BOOST_FILESYSTEM_LIB = @BOOST_FILESYSTEM_LIB@
BOOST_LDFLAGS = @BOOST_LDFLAGS@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CPPUNIT_CFLAGS = @CPPUNIT_CFLAGS@
CPPUNIT_LIBS = @CPPUNIT_LIBS@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DEBUG_CXXFLAGS = @DEBUG_CXXFLAGS@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
DOXYGEN = @DOXYGEN@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
ETONYEK_MAJOR_VERSION = @ETONYEK_MAJOR_VERSION@
ETONYEK_MICRO_VERSION = @ETONYEK_MICRO_VERSION@
ETONYEK_MINOR_VERSION = @ETONYEK_MINOR_VERSION@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
GPERF = @GPERF@
GREP = @GREP@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
KEY2RAW_WIN32_RESOURCE = @KEY2RAW_WIN32_RESOURCE@
KEY2XHTML_WIN32_RESOURCE = @KEY2XHTML_WIN32_RESOURCE@
KN_VERSION = @KN_VERSION@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBETONYEK_WIN32_RESOURCE = @LIBETONYEK_WIN32_RESOURCE@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
LT_AGE = @LT_AGE@
LT_CURRENT = @LT_CURRENT@
LT_REVISION = @LT_REVISION@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MKDIR_P = @MKDIR_P@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKG_CONFIG = @PKG_CONFIG@
PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
RANLIB = @RANLIB@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
VERSION = @VERSION@
WINDRES = @WINDRES@
WPD_CFLAGS = @WPD_CFLAGS@
WPD_LIBS = @WPD_LIBS@
XML_CFLAGS = @XML_CFLAGS@
XML_LIBS = @XML_LIBS@
ZLIB_CFLAGS = @ZLIB_CFLAGS@
ZLIB_LIBS = @ZLIB_LIBS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
EXTRA_DIST = doxygen.cfg \
footer.html.in \
header.html.in
all: all-am
.SUFFIXES:
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
&& { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign docs/doxygen/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --foreign docs/doxygen/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
tags TAGS:
ctags CTAGS:
cscope cscopelist:
distdir: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
check-am: all-am
check: check-am
all-am: Makefile
installdirs:
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-am
install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
install; \
else \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-am
clean-am: clean-generic clean-libtool clean-local mostlyclean-am
distclean: distclean-am
-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-local
dvi: dvi-am
dvi-am:
html: html-am
html-am:
info: info-am
info-am:
@WITH_LIBETONYEK_DOCS_FALSE@install-data-am:
install-dvi: install-dvi-am
install-dvi-am:
install-exec-am:
install-html: install-html-am
install-html-am:
install-info: install-info-am
install-info-am:
install-man:
install-pdf: install-pdf-am
install-pdf-am:
install-ps: install-ps-am
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-am
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-am
mostlyclean-am: mostlyclean-generic mostlyclean-libtool
pdf: pdf-am
pdf-am:
ps: ps-am
ps-am:
@WITH_LIBETONYEK_DOCS_FALSE@uninstall-am:
.MAKE: install-am install-strip
.PHONY: all all-am check check-am clean clean-generic clean-libtool \
clean-local cscopelist-am ctags-am distclean distclean-generic \
distclean-libtool distclean-local distdir dvi dvi-am html \
html-am info info-am install install-am install-data \
install-data-am install-dvi install-dvi-am install-exec \
install-exec-am install-html install-html-am install-info \
install-info-am install-man install-pdf install-pdf-am \
install-ps install-ps-am install-strip installcheck \
installcheck-am installdirs maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-generic \
mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
uninstall-am
@WITH_LIBETONYEK_DOCS_TRUE@install-data-am:
@WITH_LIBETONYEK_DOCS_TRUE@ mkdir -p $(DESTDIR)$(docdir)/html
@WITH_LIBETONYEK_DOCS_TRUE@ $(INSTALL_DATA) html/*.html $(DESTDIR)$(docdir)/html/
@WITH_LIBETONYEK_DOCS_TRUE@ $(INSTALL_DATA) html/*.png $(DESTDIR)$(docdir)/html/
@WITH_LIBETONYEK_DOCS_TRUE@ $(INSTALL_DATA) html/*.css $(DESTDIR)$(docdir)/html/
@WITH_LIBETONYEK_DOCS_TRUE@uninstall-am:
@WITH_LIBETONYEK_DOCS_TRUE@ -rm -rf $(DESTDIR)$(docdir)/html
@WITH_LIBETONYEK_DOCS_TRUE@all:
@WITH_LIBETONYEK_DOCS_TRUE@ test -f header.html.in || $(LN_S) $(srcdir)/header.html.in ./
@WITH_LIBETONYEK_DOCS_TRUE@ test -f footer.html.in || $(LN_S) $(srcdir)/footer.html.in ./
@WITH_LIBETONYEK_DOCS_TRUE@ doxygen $(srcdir)/doxygen.cfg
@WITH_LIBETONYEK_DOCS_FALSE@all:
distclean-local: clean-local
clean-local:
rm -rf html
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
libetonyek-0.0.3/docs/Makefile.in 0000664 0001750 0001750 00000045357 12270445763 014516 0 ustar jr jr # Makefile.in generated by automake 1.14.1 from Makefile.am.
# @configure_input@
# Copyright (C) 1994-2013 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
VPATH = @srcdir@
am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
*) echo "am__make_running_with_option: internal error: invalid" \
"target option '$${target_option-}' specified" >&2; \
exit 1;; \
esac; \
has_opt=no; \
sane_makeflags=$$MAKEFLAGS; \
if $(am__is_gnu_make); then \
sane_makeflags=$$MFLAGS; \
else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
bs=\\; \
sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
| sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
fi; \
skip_next=no; \
strip_trailopt () \
{ \
flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
}; \
for flg in $$sane_makeflags; do \
test $$skip_next = yes && { skip_next=no; continue; }; \
case $$flg in \
*=*|--*) continue;; \
-*I) strip_trailopt 'I'; skip_next=yes;; \
-*I?*) strip_trailopt 'I';; \
-*O) strip_trailopt 'O'; skip_next=yes;; \
-*O?*) strip_trailopt 'O';; \
-*l) strip_trailopt 'l'; skip_next=yes;; \
-*l?*) strip_trailopt 'l';; \
-[dEDm]) skip_next=yes;; \
-[JT]) skip_next=yes;; \
esac; \
case $$flg in \
*$$target_option*) has_opt=yes; break;; \
esac; \
done; \
test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
subdir = docs
DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/ax_boost_base.m4 \
$(top_srcdir)/m4/ax_boost_filesystem.m4 \
$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo " GEN " $@;
am__v_GEN_1 =
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 =
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
ctags-recursive dvi-recursive html-recursive info-recursive \
install-data-recursive install-dvi-recursive \
install-exec-recursive install-html-recursive \
install-info-recursive install-pdf-recursive \
install-ps-recursive install-recursive installcheck-recursive \
installdirs-recursive pdf-recursive ps-recursive \
tags-recursive uninstall-recursive
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
am__recursive_targets = \
$(RECURSIVE_TARGETS) \
$(RECURSIVE_CLEAN_TARGETS) \
$(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
distdir
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates. Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
BEGIN { nonempty = 0; } \
{ items[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique. This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
list='$(am__tagged_files)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
am__relativize = \
dir0=`pwd`; \
sed_first='s,^\([^/]*\)/.*$$,\1,'; \
sed_rest='s,^[^/]*/*,,'; \
sed_last='s,^.*/\([^/]*\)$$,\1,'; \
sed_butlast='s,/*[^/]*$$,,'; \
while test -n "$$dir1"; do \
first=`echo "$$dir1" | sed -e "$$sed_first"`; \
if test "$$first" != "."; then \
if test "$$first" = ".."; then \
dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
else \
first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
if test "$$first2" = "$$first"; then \
dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
else \
dir2="../$$dir2"; \
fi; \
dir0="$$dir0"/"$$first"; \
fi; \
fi; \
dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
done; \
reldir="$$dir2"
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AS = @AS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BOOST_CFLAGS = @BOOST_CFLAGS@
BOOST_CPPFLAGS = @BOOST_CPPFLAGS@
BOOST_FILESYSTEM_LIB = @BOOST_FILESYSTEM_LIB@
BOOST_LDFLAGS = @BOOST_LDFLAGS@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CPPUNIT_CFLAGS = @CPPUNIT_CFLAGS@
CPPUNIT_LIBS = @CPPUNIT_LIBS@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DEBUG_CXXFLAGS = @DEBUG_CXXFLAGS@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
DOXYGEN = @DOXYGEN@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
ETONYEK_MAJOR_VERSION = @ETONYEK_MAJOR_VERSION@
ETONYEK_MICRO_VERSION = @ETONYEK_MICRO_VERSION@
ETONYEK_MINOR_VERSION = @ETONYEK_MINOR_VERSION@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
GPERF = @GPERF@
GREP = @GREP@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
KEY2RAW_WIN32_RESOURCE = @KEY2RAW_WIN32_RESOURCE@
KEY2XHTML_WIN32_RESOURCE = @KEY2XHTML_WIN32_RESOURCE@
KN_VERSION = @KN_VERSION@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBETONYEK_WIN32_RESOURCE = @LIBETONYEK_WIN32_RESOURCE@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
LT_AGE = @LT_AGE@
LT_CURRENT = @LT_CURRENT@
LT_REVISION = @LT_REVISION@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MKDIR_P = @MKDIR_P@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKG_CONFIG = @PKG_CONFIG@
PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
RANLIB = @RANLIB@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
VERSION = @VERSION@
WINDRES = @WINDRES@
WPD_CFLAGS = @WPD_CFLAGS@
WPD_LIBS = @WPD_LIBS@
XML_CFLAGS = @XML_CFLAGS@
XML_LIBS = @XML_LIBS@
ZLIB_CFLAGS = @ZLIB_CFLAGS@
ZLIB_LIBS = @ZLIB_LIBS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
SUBDIRS = doxygen
all: all-recursive
.SUFFIXES:
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
&& { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign docs/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --foreign docs/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
# This directory's subdirectories are mostly independent; you can cd
# into them and run 'make' without going through this Makefile.
# To change the values of 'make' variables: instead of editing Makefiles,
# (1) if the variable is set in 'config.status', edit 'config.status'
# (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
$(am__recursive_targets):
@fail=; \
if $(am__make_keepgoing); then \
failcom='fail=yes'; \
else \
failcom='exit 1'; \
fi; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
ID: $(am__tagged_files)
$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-recursive
TAGS: tags
tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
empty_fix=.; \
else \
include_option=--include; \
empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
$(am__define_uniq_tagged_files); \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
ctags: ctags-recursive
CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
$(am__define_uniq_tagged_files); \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
cscopelist: cscopelist-recursive
cscopelist-am: $(am__tagged_files)
list='$(am__tagged_files)'; \
case "$(srcdir)" in \
[\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
*) sdir=$(subdir)/$(srcdir) ;; \
esac; \
for i in $$list; do \
if test -f "$$i"; then \
echo "$(subdir)/$$i"; \
else \
echo "$$sdir/$$i"; \
fi; \
done >> $(top_builddir)/cscope.files
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
$(am__make_dryrun) \
|| test -d "$(distdir)/$$subdir" \
|| $(MKDIR_P) "$(distdir)/$$subdir" \
|| exit 1; \
dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
$(am__relativize); \
new_distdir=$$reldir; \
dir1=$$subdir; dir2="$(top_distdir)"; \
$(am__relativize); \
new_top_distdir=$$reldir; \
echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
($(am__cd) $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$$new_top_distdir" \
distdir="$$new_distdir" \
am__remove_distdir=: \
am__skip_length_check=: \
am__skip_mode_fix=: \
distdir) \
|| exit 1; \
fi; \
done
check-am: all-am
check: check-recursive
all-am: Makefile
installdirs: installdirs-recursive
installdirs-am:
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
install; \
else \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive
clean-am: clean-generic clean-libtool mostlyclean-am
distclean: distclean-recursive
-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-tags
dvi: dvi-recursive
dvi-am:
html: html-recursive
html-am:
info: info-recursive
info-am:
install-data-am:
install-dvi: install-dvi-recursive
install-dvi-am:
install-exec-am:
install-html: install-html-recursive
install-html-am:
install-info: install-info-recursive
install-info-am:
install-man:
install-pdf: install-pdf-recursive
install-pdf-am:
install-ps: install-ps-recursive
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-generic mostlyclean-libtool
pdf: pdf-recursive
pdf-am:
ps: ps-recursive
ps-am:
uninstall-am:
.MAKE: $(am__recursive_targets) install-am install-strip
.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
check-am clean clean-generic clean-libtool cscopelist-am ctags \
ctags-am distclean distclean-generic distclean-libtool \
distclean-tags distdir dvi dvi-am html html-am info info-am \
install install-am install-data install-data-am install-dvi \
install-dvi-am install-exec install-exec-am install-html \
install-html-am install-info install-info-am install-man \
install-pdf install-pdf-am install-ps install-ps-am \
install-strip installcheck installcheck-am installdirs \
installdirs-am maintainer-clean maintainer-clean-generic \
mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
ps ps-am tags tags-am uninstall uninstall-am
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
libetonyek-0.0.3/README 0000664 0001750 0001750 00000003003 12250351501 012337 0 ustar jr jr libetonyek is a library and a set of tools for reading and converting
Apple Keynote presentations. The library tries to extract the most
important parts of version 2 format of Keynote (version 1 is not
supported yet, but it should be in the future. Version 6 is being
reverse engineered; we plan to support it as well when there is enough
info about the new format to implement something). See FEATURES for what
is currently supported.
Keynote documentation is, sadly, scarce. There are two official Apple
documents: The first one is "Technical Note 2073" (TN2073) [TODO: add
link], describing basic parts of the Keynote 1 format. The second is
"iWork Programming Guide", containing an overview of the Keynote 2
structure. Unfortunately it mostly documents things that do not need to
be documented: I mean, anyone can guess what elements like slide,
master-slide, stylesheet or layer mean, right? But how exactly does
style inheritance work? Which elements can be saved as a reference? What
do all these 1-3 letter elements and attributes in table model mean?
These and a lot of other questions remain unanswered. And that is just
the first incarnation of the version 2 format; nobody knows what has
changed since then.
Based on the previous paragraph, it should be clear that most of the
code in this library is based on guesses, sample presentations created
in Keynote '09 and "real-life" presentations collected on the Internet.
libetonyek requires boost, libwpd, libxml2 and zlib to build.
The library is available under MPL 2.0+.
libetonyek-0.0.3/astyle.options 0000664 0001750 0001750 00000000237 12250351501 014403 0 ustar jr jr # formatting options
style=allman
indent=spaces=2
align-pointer=name
break-closing-brackets
pad-header
unpad-paren
# processing options
recursive
suffix=none
libetonyek-0.0.3/NEWS 0000664 0001750 0001750 00000000644 12250351501 012166 0 ustar jr jr libetonyek 0.0.3
- import text formatting attributes
- draw rounded rectangles and callouts
libetonyek 0.0.2
- fixed build with older boost
- implemented import of tables
- implemented import of presentation notes
- implemented import of sticky notes
libetonyek 0.0.1
- build fixes
- improved input format detection
- minor cleanups
libetonyek 0.0.0
- first release
- see FEATURES for what is currently supported
libetonyek-0.0.3/AUTHORS 0000664 0001750 0001750 00000000207 12250351501 012532 0 ustar jr jr CREDITS
Current maintainers and authors of libetonyek
---------------------------------------------
David Tardon (dtardon@redhat.com)
libetonyek-0.0.3/config.sub 0000664 0001750 0001750 00000105354 12270445730 013465 0 ustar jr jr #! /bin/sh
# Configuration validation subroutine script.
# Copyright 1992-2013 Free Software Foundation, Inc.
timestamp='2013-08-10'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, see .
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that
# program. This Exception is an additional permission under section 7
# of the GNU General Public License, version 3 ("GPLv3").
# Please send patches with a ChangeLog entry to config-patches@gnu.org.
#
# Configuration subroutine to validate and canonicalize a configuration type.
# Supply the specified configuration type as an argument.
# If it is invalid, we print an error message on stderr and exit with code 1.
# Otherwise, we print the canonical config type on stdout and succeed.
# You can get the latest version of this script from:
# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
# This file is supposed to be the same for all GNU packages
# and recognize all the CPU types, system types and aliases
# that are meaningful with *any* GNU software.
# Each package is responsible for reporting which valid configurations
# it does not support. The user should be able to distinguish
# a failure to support a valid configuration from a meaningless
# configuration.
# The goal of this file is to map all the various variations of a given
# machine specification into a single specification in the form:
# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
# or in some cases, the newer four-part form:
# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
# It is wrong to echo any other type of specification.
me=`echo "$0" | sed -e 's,.*/,,'`
usage="\
Usage: $0 [OPTION] CPU-MFR-OPSYS
$0 [OPTION] ALIAS
Canonicalize a configuration name.
Operation modes:
-h, --help print this help, then exit
-t, --time-stamp print date of last modification, then exit
-v, --version print version number, then exit
Report bugs and patches to ."
version="\
GNU config.sub ($timestamp)
Copyright 1992-2013 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
help="
Try \`$me --help' for more information."
# Parse command line
while test $# -gt 0 ; do
case $1 in
--time-stamp | --time* | -t )
echo "$timestamp" ; exit ;;
--version | -v )
echo "$version" ; exit ;;
--help | --h* | -h )
echo "$usage"; exit ;;
-- ) # Stop option processing
shift; break ;;
- ) # Use stdin as input.
break ;;
-* )
echo "$me: invalid option $1$help"
exit 1 ;;
*local*)
# First pass through any local machine types.
echo $1
exit ;;
* )
break ;;
esac
done
case $# in
0) echo "$me: missing argument$help" >&2
exit 1;;
1) ;;
*) echo "$me: too many arguments$help" >&2
exit 1;;
esac
# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
# Here we must recognize all the valid KERNEL-OS combinations.
maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
case $maybe_os in
nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
knetbsd*-gnu* | netbsd*-gnu* | \
kopensolaris*-gnu* | \
storm-chaos* | os2-emx* | rtmk-nova*)
os=-$maybe_os
basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
;;
android-linux)
os=-linux-android
basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown
;;
*)
basic_machine=`echo $1 | sed 's/-[^-]*$//'`
if [ $basic_machine != $1 ]
then os=`echo $1 | sed 's/.*-/-/'`
else os=; fi
;;
esac
### Let's recognize common machines as not being operating systems so
### that things like config.sub decstation-3100 work. We also
### recognize some manufacturers as not being operating systems, so we
### can provide default operating systems below.
case $os in
-sun*os*)
# Prevent following clause from handling this invalid input.
;;
-dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
-att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
-unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
-apple | -axis | -knuth | -cray | -microblaze*)
os=
basic_machine=$1
;;
-bluegene*)
os=-cnk
;;
-sim | -cisco | -oki | -wec | -winbond)
os=
basic_machine=$1
;;
-scout)
;;
-wrs)
os=-vxworks
basic_machine=$1
;;
-chorusos*)
os=-chorusos
basic_machine=$1
;;
-chorusrdb)
os=-chorusrdb
basic_machine=$1
;;
-hiux*)
os=-hiuxwe2
;;
-sco6)
os=-sco5v6
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
-sco5)
os=-sco3.2v5
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
-sco4)
os=-sco3.2v4
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
-sco3.2.[4-9]*)
os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
-sco3.2v[4-9]*)
# Don't forget version if it is 3.2v4 or newer.
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
-sco5v6*)
# Don't forget version if it is 3.2v4 or newer.
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
-sco*)
os=-sco3.2v2
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
-udk*)
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
-isc)
os=-isc2.2
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
-clix*)
basic_machine=clipper-intergraph
;;
-isc*)
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
-lynx*178)
os=-lynxos178
;;
-lynx*5)
os=-lynxos5
;;
-lynx*)
os=-lynxos
;;
-ptx*)
basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
;;
-windowsnt*)
os=`echo $os | sed -e 's/windowsnt/winnt/'`
;;
-psos*)
os=-psos
;;
-mint | -mint[0-9]*)
basic_machine=m68k-atari
os=-mint
;;
esac
# Decode aliases for certain CPU-COMPANY combinations.
case $basic_machine in
# Recognize the basic CPU types without company name.
# Some are omitted here because they have special meanings below.
1750a | 580 \
| a29k \
| aarch64 | aarch64_be \
| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
| am33_2.0 \
| arc | arceb \
| arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \
| avr | avr32 \
| be32 | be64 \
| bfin \
| c4x | c8051 | clipper \
| d10v | d30v | dlx | dsp16xx \
| epiphany \
| fido | fr30 | frv \
| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
| hexagon \
| i370 | i860 | i960 | ia64 \
| ip2k | iq2000 \
| le32 | le64 \
| lm32 \
| m32c | m32r | m32rle | m68000 | m68k | m88k \
| maxq | mb | microblaze | microblazeel | mcore | mep | metag \
| mips | mipsbe | mipseb | mipsel | mipsle \
| mips16 \
| mips64 | mips64el \
| mips64octeon | mips64octeonel \
| mips64orion | mips64orionel \
| mips64r5900 | mips64r5900el \
| mips64vr | mips64vrel \
| mips64vr4100 | mips64vr4100el \
| mips64vr4300 | mips64vr4300el \
| mips64vr5000 | mips64vr5000el \
| mips64vr5900 | mips64vr5900el \
| mipsisa32 | mipsisa32el \
| mipsisa32r2 | mipsisa32r2el \
| mipsisa64 | mipsisa64el \
| mipsisa64r2 | mipsisa64r2el \
| mipsisa64sb1 | mipsisa64sb1el \
| mipsisa64sr71k | mipsisa64sr71kel \
| mipsr5900 | mipsr5900el \
| mipstx39 | mipstx39el \
| mn10200 | mn10300 \
| moxie \
| mt \
| msp430 \
| nds32 | nds32le | nds32be \
| nios | nios2 | nios2eb | nios2el \
| ns16k | ns32k \
| open8 \
| or1k | or32 \
| pdp10 | pdp11 | pj | pjl \
| powerpc | powerpc64 | powerpc64le | powerpcle \
| pyramid \
| rl78 | rx \
| score \
| sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
| sh64 | sh64le \
| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
| spu \
| tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \
| ubicom32 \
| v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \
| we32k \
| x86 | xc16x | xstormy16 | xtensa \
| z8k | z80)
basic_machine=$basic_machine-unknown
;;
c54x)
basic_machine=tic54x-unknown
;;
c55x)
basic_machine=tic55x-unknown
;;
c6x)
basic_machine=tic6x-unknown
;;
m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | picochip)
basic_machine=$basic_machine-unknown
os=-none
;;
m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
;;
ms1)
basic_machine=mt-unknown
;;
strongarm | thumb | xscale)
basic_machine=arm-unknown
;;
xgate)
basic_machine=$basic_machine-unknown
os=-none
;;
xscaleeb)
basic_machine=armeb-unknown
;;
xscaleel)
basic_machine=armel-unknown
;;
# We use `pc' rather than `unknown'
# because (1) that's what they normally are, and
# (2) the word "unknown" tends to confuse beginning users.
i*86 | x86_64)
basic_machine=$basic_machine-pc
;;
# Object if more than one company name word.
*-*-*)
echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
exit 1
;;
# Recognize the basic CPU types with company name.
580-* \
| a29k-* \
| aarch64-* | aarch64_be-* \
| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
| alphapca5[67]-* | alpha64pca5[67]-* | arc-* | arceb-* \
| arm-* | armbe-* | armle-* | armeb-* | armv*-* \
| avr-* | avr32-* \
| be32-* | be64-* \
| bfin-* | bs2000-* \
| c[123]* | c30-* | [cjt]90-* | c4x-* \
| c8051-* | clipper-* | craynv-* | cydra-* \
| d10v-* | d30v-* | dlx-* \
| elxsi-* \
| f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
| h8300-* | h8500-* \
| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
| hexagon-* \
| i*86-* | i860-* | i960-* | ia64-* \
| ip2k-* | iq2000-* \
| le32-* | le64-* \
| lm32-* \
| m32c-* | m32r-* | m32rle-* \
| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
| m88110-* | m88k-* | maxq-* | mcore-* | metag-* \
| microblaze-* | microblazeel-* \
| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
| mips16-* \
| mips64-* | mips64el-* \
| mips64octeon-* | mips64octeonel-* \
| mips64orion-* | mips64orionel-* \
| mips64r5900-* | mips64r5900el-* \
| mips64vr-* | mips64vrel-* \
| mips64vr4100-* | mips64vr4100el-* \
| mips64vr4300-* | mips64vr4300el-* \
| mips64vr5000-* | mips64vr5000el-* \
| mips64vr5900-* | mips64vr5900el-* \
| mipsisa32-* | mipsisa32el-* \
| mipsisa32r2-* | mipsisa32r2el-* \
| mipsisa64-* | mipsisa64el-* \
| mipsisa64r2-* | mipsisa64r2el-* \
| mipsisa64sb1-* | mipsisa64sb1el-* \
| mipsisa64sr71k-* | mipsisa64sr71kel-* \
| mipsr5900-* | mipsr5900el-* \
| mipstx39-* | mipstx39el-* \
| mmix-* \
| mt-* \
| msp430-* \
| nds32-* | nds32le-* | nds32be-* \
| nios-* | nios2-* | nios2eb-* | nios2el-* \
| none-* | np1-* | ns16k-* | ns32k-* \
| open8-* \
| orion-* \
| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \
| pyramid-* \
| rl78-* | romp-* | rs6000-* | rx-* \
| sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
| sparclite-* \
| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \
| tahoe-* \
| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
| tile*-* \
| tron-* \
| ubicom32-* \
| v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \
| vax-* \
| we32k-* \
| x86-* | x86_64-* | xc16x-* | xps100-* \
| xstormy16-* | xtensa*-* \
| ymp-* \
| z8k-* | z80-*)
;;
# Recognize the basic CPU types without company name, with glob match.
xtensa*)
basic_machine=$basic_machine-unknown
;;
# Recognize the various machine names and aliases which stand
# for a CPU type and a company and sometimes even an OS.
386bsd)
basic_machine=i386-unknown
os=-bsd
;;
3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
basic_machine=m68000-att
;;
3b*)
basic_machine=we32k-att
;;
a29khif)
basic_machine=a29k-amd
os=-udi
;;
abacus)
basic_machine=abacus-unknown
;;
adobe68k)
basic_machine=m68010-adobe
os=-scout
;;
alliant | fx80)
basic_machine=fx80-alliant
;;
altos | altos3068)
basic_machine=m68k-altos
;;
am29k)
basic_machine=a29k-none
os=-bsd
;;
amd64)
basic_machine=x86_64-pc
;;
amd64-*)
basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
amdahl)
basic_machine=580-amdahl
os=-sysv
;;
amiga | amiga-*)
basic_machine=m68k-unknown
;;
amigaos | amigados)
basic_machine=m68k-unknown
os=-amigaos
;;
amigaunix | amix)
basic_machine=m68k-unknown
os=-sysv4
;;
apollo68)
basic_machine=m68k-apollo
os=-sysv
;;
apollo68bsd)
basic_machine=m68k-apollo
os=-bsd
;;
aros)
basic_machine=i386-pc
os=-aros
;;
aux)
basic_machine=m68k-apple
os=-aux
;;
balance)
basic_machine=ns32k-sequent
os=-dynix
;;
blackfin)
basic_machine=bfin-unknown
os=-linux
;;
blackfin-*)
basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
os=-linux
;;
bluegene*)
basic_machine=powerpc-ibm
os=-cnk
;;
c54x-*)
basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
c55x-*)
basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
c6x-*)
basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
c90)
basic_machine=c90-cray
os=-unicos
;;
cegcc)
basic_machine=arm-unknown
os=-cegcc
;;
convex-c1)
basic_machine=c1-convex
os=-bsd
;;
convex-c2)
basic_machine=c2-convex
os=-bsd
;;
convex-c32)
basic_machine=c32-convex
os=-bsd
;;
convex-c34)
basic_machine=c34-convex
os=-bsd
;;
convex-c38)
basic_machine=c38-convex
os=-bsd
;;
cray | j90)
basic_machine=j90-cray
os=-unicos
;;
craynv)
basic_machine=craynv-cray
os=-unicosmp
;;
cr16 | cr16-*)
basic_machine=cr16-unknown
os=-elf
;;
crds | unos)
basic_machine=m68k-crds
;;
crisv32 | crisv32-* | etraxfs*)
basic_machine=crisv32-axis
;;
cris | cris-* | etrax*)
basic_machine=cris-axis
;;
crx)
basic_machine=crx-unknown
os=-elf
;;
da30 | da30-*)
basic_machine=m68k-da30
;;
decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
basic_machine=mips-dec
;;
decsystem10* | dec10*)
basic_machine=pdp10-dec
os=-tops10
;;
decsystem20* | dec20*)
basic_machine=pdp10-dec
os=-tops20
;;
delta | 3300 | motorola-3300 | motorola-delta \
| 3300-motorola | delta-motorola)
basic_machine=m68k-motorola
;;
delta88)
basic_machine=m88k-motorola
os=-sysv3
;;
dicos)
basic_machine=i686-pc
os=-dicos
;;
djgpp)
basic_machine=i586-pc
os=-msdosdjgpp
;;
dpx20 | dpx20-*)
basic_machine=rs6000-bull
os=-bosx
;;
dpx2* | dpx2*-bull)
basic_machine=m68k-bull
os=-sysv3
;;
ebmon29k)
basic_machine=a29k-amd
os=-ebmon
;;
elxsi)
basic_machine=elxsi-elxsi
os=-bsd
;;
encore | umax | mmax)
basic_machine=ns32k-encore
;;
es1800 | OSE68k | ose68k | ose | OSE)
basic_machine=m68k-ericsson
os=-ose
;;
fx2800)
basic_machine=i860-alliant
;;
genix)
basic_machine=ns32k-ns
;;
gmicro)
basic_machine=tron-gmicro
os=-sysv
;;
go32)
basic_machine=i386-pc
os=-go32
;;
h3050r* | hiux*)
basic_machine=hppa1.1-hitachi
os=-hiuxwe2
;;
h8300hms)
basic_machine=h8300-hitachi
os=-hms
;;
h8300xray)
basic_machine=h8300-hitachi
os=-xray
;;
h8500hms)
basic_machine=h8500-hitachi
os=-hms
;;
harris)
basic_machine=m88k-harris
os=-sysv3
;;
hp300-*)
basic_machine=m68k-hp
;;
hp300bsd)
basic_machine=m68k-hp
os=-bsd
;;
hp300hpux)
basic_machine=m68k-hp
os=-hpux
;;
hp3k9[0-9][0-9] | hp9[0-9][0-9])
basic_machine=hppa1.0-hp
;;
hp9k2[0-9][0-9] | hp9k31[0-9])
basic_machine=m68000-hp
;;
hp9k3[2-9][0-9])
basic_machine=m68k-hp
;;
hp9k6[0-9][0-9] | hp6[0-9][0-9])
basic_machine=hppa1.0-hp
;;
hp9k7[0-79][0-9] | hp7[0-79][0-9])
basic_machine=hppa1.1-hp
;;
hp9k78[0-9] | hp78[0-9])
# FIXME: really hppa2.0-hp
basic_machine=hppa1.1-hp
;;
hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
# FIXME: really hppa2.0-hp
basic_machine=hppa1.1-hp
;;
hp9k8[0-9][13679] | hp8[0-9][13679])
basic_machine=hppa1.1-hp
;;
hp9k8[0-9][0-9] | hp8[0-9][0-9])
basic_machine=hppa1.0-hp
;;
hppa-next)
os=-nextstep3
;;
hppaosf)
basic_machine=hppa1.1-hp
os=-osf
;;
hppro)
basic_machine=hppa1.1-hp
os=-proelf
;;
i370-ibm* | ibm*)
basic_machine=i370-ibm
;;
i*86v32)
basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
os=-sysv32
;;
i*86v4*)
basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
os=-sysv4
;;
i*86v)
basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
os=-sysv
;;
i*86sol2)
basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
os=-solaris2
;;
i386mach)
basic_machine=i386-mach
os=-mach
;;
i386-vsta | vsta)
basic_machine=i386-unknown
os=-vsta
;;
iris | iris4d)
basic_machine=mips-sgi
case $os in
-irix*)
;;
*)
os=-irix4
;;
esac
;;
isi68 | isi)
basic_machine=m68k-isi
os=-sysv
;;
m68knommu)
basic_machine=m68k-unknown
os=-linux
;;
m68knommu-*)
basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
os=-linux
;;
m88k-omron*)
basic_machine=m88k-omron
;;
magnum | m3230)
basic_machine=mips-mips
os=-sysv
;;
merlin)
basic_machine=ns32k-utek
os=-sysv
;;
microblaze*)
basic_machine=microblaze-xilinx
;;
mingw64)
basic_machine=x86_64-pc
os=-mingw64
;;
mingw32)
basic_machine=i686-pc
os=-mingw32
;;
mingw32ce)
basic_machine=arm-unknown
os=-mingw32ce
;;
miniframe)
basic_machine=m68000-convergent
;;
*mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
basic_machine=m68k-atari
os=-mint
;;
mips3*-*)
basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
;;
mips3*)
basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
;;
monitor)
basic_machine=m68k-rom68k
os=-coff
;;
morphos)
basic_machine=powerpc-unknown
os=-morphos
;;
msdos)
basic_machine=i386-pc
os=-msdos
;;
ms1-*)
basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
;;
msys)
basic_machine=i686-pc
os=-msys
;;
mvs)
basic_machine=i370-ibm
os=-mvs
;;
nacl)
basic_machine=le32-unknown
os=-nacl
;;
ncr3000)
basic_machine=i486-ncr
os=-sysv4
;;
netbsd386)
basic_machine=i386-unknown
os=-netbsd
;;
netwinder)
basic_machine=armv4l-rebel
os=-linux
;;
news | news700 | news800 | news900)
basic_machine=m68k-sony
os=-newsos
;;
news1000)
basic_machine=m68030-sony
os=-newsos
;;
news-3600 | risc-news)
basic_machine=mips-sony
os=-newsos
;;
necv70)
basic_machine=v70-nec
os=-sysv
;;
next | m*-next )
basic_machine=m68k-next
case $os in
-nextstep* )
;;
-ns2*)
os=-nextstep2
;;
*)
os=-nextstep3
;;
esac
;;
nh3000)
basic_machine=m68k-harris
os=-cxux
;;
nh[45]000)
basic_machine=m88k-harris
os=-cxux
;;
nindy960)
basic_machine=i960-intel
os=-nindy
;;
mon960)
basic_machine=i960-intel
os=-mon960
;;
nonstopux)
basic_machine=mips-compaq
os=-nonstopux
;;
np1)
basic_machine=np1-gould
;;
neo-tandem)
basic_machine=neo-tandem
;;
nse-tandem)
basic_machine=nse-tandem
;;
nsr-tandem)
basic_machine=nsr-tandem
;;
op50n-* | op60c-*)
basic_machine=hppa1.1-oki
os=-proelf
;;
openrisc | openrisc-*)
basic_machine=or32-unknown
;;
os400)
basic_machine=powerpc-ibm
os=-os400
;;
OSE68000 | ose68000)
basic_machine=m68000-ericsson
os=-ose
;;
os68k)
basic_machine=m68k-none
os=-os68k
;;
pa-hitachi)
basic_machine=hppa1.1-hitachi
os=-hiuxwe2
;;
paragon)
basic_machine=i860-intel
os=-osf
;;
parisc)
basic_machine=hppa-unknown
os=-linux
;;
parisc-*)
basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
os=-linux
;;
pbd)
basic_machine=sparc-tti
;;
pbb)
basic_machine=m68k-tti
;;
pc532 | pc532-*)
basic_machine=ns32k-pc532
;;
pc98)
basic_machine=i386-pc
;;
pc98-*)
basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
pentium | p5 | k5 | k6 | nexgen | viac3)
basic_machine=i586-pc
;;
pentiumpro | p6 | 6x86 | athlon | athlon_*)
basic_machine=i686-pc
;;
pentiumii | pentium2 | pentiumiii | pentium3)
basic_machine=i686-pc
;;
pentium4)
basic_machine=i786-pc
;;
pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
pentiumpro-* | p6-* | 6x86-* | athlon-*)
basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
pentium4-*)
basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
pn)
basic_machine=pn-gould
;;
power) basic_machine=power-ibm
;;
ppc | ppcbe) basic_machine=powerpc-unknown
;;
ppc-* | ppcbe-*)
basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
ppcle | powerpclittle | ppc-le | powerpc-little)
basic_machine=powerpcle-unknown
;;
ppcle-* | powerpclittle-*)
basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
ppc64) basic_machine=powerpc64-unknown
;;
ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
ppc64le | powerpc64little | ppc64-le | powerpc64-little)
basic_machine=powerpc64le-unknown
;;
ppc64le-* | powerpc64little-*)
basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
ps2)
basic_machine=i386-ibm
;;
pw32)
basic_machine=i586-unknown
os=-pw32
;;
rdos | rdos64)
basic_machine=x86_64-pc
os=-rdos
;;
rdos32)
basic_machine=i386-pc
os=-rdos
;;
rom68k)
basic_machine=m68k-rom68k
os=-coff
;;
rm[46]00)
basic_machine=mips-siemens
;;
rtpc | rtpc-*)
basic_machine=romp-ibm
;;
s390 | s390-*)
basic_machine=s390-ibm
;;
s390x | s390x-*)
basic_machine=s390x-ibm
;;
sa29200)
basic_machine=a29k-amd
os=-udi
;;
sb1)
basic_machine=mipsisa64sb1-unknown
;;
sb1el)
basic_machine=mipsisa64sb1el-unknown
;;
sde)
basic_machine=mipsisa32-sde
os=-elf
;;
sei)
basic_machine=mips-sei
os=-seiux
;;
sequent)
basic_machine=i386-sequent
;;
sh)
basic_machine=sh-hitachi
os=-hms
;;
sh5el)
basic_machine=sh5le-unknown
;;
sh64)
basic_machine=sh64-unknown
;;
sparclite-wrs | simso-wrs)
basic_machine=sparclite-wrs
os=-vxworks
;;
sps7)
basic_machine=m68k-bull
os=-sysv2
;;
spur)
basic_machine=spur-unknown
;;
st2000)
basic_machine=m68k-tandem
;;
stratus)
basic_machine=i860-stratus
os=-sysv4
;;
strongarm-* | thumb-*)
basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
sun2)
basic_machine=m68000-sun
;;
sun2os3)
basic_machine=m68000-sun
os=-sunos3
;;
sun2os4)
basic_machine=m68000-sun
os=-sunos4
;;
sun3os3)
basic_machine=m68k-sun
os=-sunos3
;;
sun3os4)
basic_machine=m68k-sun
os=-sunos4
;;
sun4os3)
basic_machine=sparc-sun
os=-sunos3
;;
sun4os4)
basic_machine=sparc-sun
os=-sunos4
;;
sun4sol2)
basic_machine=sparc-sun
os=-solaris2
;;
sun3 | sun3-*)
basic_machine=m68k-sun
;;
sun4)
basic_machine=sparc-sun
;;
sun386 | sun386i | roadrunner)
basic_machine=i386-sun
;;
sv1)
basic_machine=sv1-cray
os=-unicos
;;
symmetry)
basic_machine=i386-sequent
os=-dynix
;;
t3e)
basic_machine=alphaev5-cray
os=-unicos
;;
t90)
basic_machine=t90-cray
os=-unicos
;;
tile*)
basic_machine=$basic_machine-unknown
os=-linux-gnu
;;
tx39)
basic_machine=mipstx39-unknown
;;
tx39el)
basic_machine=mipstx39el-unknown
;;
toad1)
basic_machine=pdp10-xkl
os=-tops20
;;
tower | tower-32)
basic_machine=m68k-ncr
;;
tpf)
basic_machine=s390x-ibm
os=-tpf
;;
udi29k)
basic_machine=a29k-amd
os=-udi
;;
ultra3)
basic_machine=a29k-nyu
os=-sym1
;;
v810 | necv810)
basic_machine=v810-nec
os=-none
;;
vaxv)
basic_machine=vax-dec
os=-sysv
;;
vms)
basic_machine=vax-dec
os=-vms
;;
vpp*|vx|vx-*)
basic_machine=f301-fujitsu
;;
vxworks960)
basic_machine=i960-wrs
os=-vxworks
;;
vxworks68)
basic_machine=m68k-wrs
os=-vxworks
;;
vxworks29k)
basic_machine=a29k-wrs
os=-vxworks
;;
w65*)
basic_machine=w65-wdc
os=-none
;;
w89k-*)
basic_machine=hppa1.1-winbond
os=-proelf
;;
xbox)
basic_machine=i686-pc
os=-mingw32
;;
xps | xps100)
basic_machine=xps100-honeywell
;;
xscale-* | xscalee[bl]-*)
basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'`
;;
ymp)
basic_machine=ymp-cray
os=-unicos
;;
z8k-*-coff)
basic_machine=z8k-unknown
os=-sim
;;
z80-*-coff)
basic_machine=z80-unknown
os=-sim
;;
none)
basic_machine=none-none
os=-none
;;
# Here we handle the default manufacturer of certain CPU types. It is in
# some cases the only manufacturer, in others, it is the most popular.
w89k)
basic_machine=hppa1.1-winbond
;;
op50n)
basic_machine=hppa1.1-oki
;;
op60c)
basic_machine=hppa1.1-oki
;;
romp)
basic_machine=romp-ibm
;;
mmix)
basic_machine=mmix-knuth
;;
rs6000)
basic_machine=rs6000-ibm
;;
vax)
basic_machine=vax-dec
;;
pdp10)
# there are many clones, so DEC is not a safe bet
basic_machine=pdp10-unknown
;;
pdp11)
basic_machine=pdp11-dec
;;
we32k)
basic_machine=we32k-att
;;
sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele)
basic_machine=sh-unknown
;;
sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
basic_machine=sparc-sun
;;
cydra)
basic_machine=cydra-cydrome
;;
orion)
basic_machine=orion-highlevel
;;
orion105)
basic_machine=clipper-highlevel
;;
mac | mpw | mac-mpw)
basic_machine=m68k-apple
;;
pmac | pmac-mpw)
basic_machine=powerpc-apple
;;
*-unknown)
# Make sure to match an already-canonicalized machine name.
;;
*)
echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
exit 1
;;
esac
# Here we canonicalize certain aliases for manufacturers.
case $basic_machine in
*-digital*)
basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
;;
*-commodore*)
basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
;;
*)
;;
esac
# Decode manufacturer-specific aliases for certain operating systems.
if [ x"$os" != x"" ]
then
case $os in
# First match some system type aliases
# that might get confused with valid system types.
# -solaris* is a basic system type, with this one exception.
-auroraux)
os=-auroraux
;;
-solaris1 | -solaris1.*)
os=`echo $os | sed -e 's|solaris1|sunos4|'`
;;
-solaris)
os=-solaris2
;;
-svr4*)
os=-sysv4
;;
-unixware*)
os=-sysv4.2uw
;;
-gnu/linux*)
os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
;;
# First accept the basic system types.
# The portable systems comes first.
# Each alternative MUST END IN A *, to match a version number.
# -sysv* is not here because it comes later, after sysvr4.
-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
| -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
| -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \
| -sym* | -kopensolaris* | -plan9* \
| -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
| -aos* | -aros* \
| -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
| -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
| -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
| -bitrig* | -openbsd* | -solidbsd* \
| -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
| -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
| -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
| -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
| -chorusos* | -chorusrdb* | -cegcc* \
| -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
| -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \
| -linux-newlib* | -linux-musl* | -linux-uclibc* \
| -uxpv* | -beos* | -mpeix* | -udk* \
| -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
| -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
| -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
| -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
| -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
| -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
| -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*)
# Remember, each alternative MUST END IN *, to match a version number.
;;
-qnx*)
case $basic_machine in
x86-* | i*86-*)
;;
*)
os=-nto$os
;;
esac
;;
-nto-qnx*)
;;
-nto*)
os=`echo $os | sed -e 's|nto|nto-qnx|'`
;;
-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
| -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
| -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
;;
-mac*)
os=`echo $os | sed -e 's|mac|macos|'`
;;
-linux-dietlibc)
os=-linux-dietlibc
;;
-linux*)
os=`echo $os | sed -e 's|linux|linux-gnu|'`
;;
-sunos5*)
os=`echo $os | sed -e 's|sunos5|solaris2|'`
;;
-sunos6*)
os=`echo $os | sed -e 's|sunos6|solaris3|'`
;;
-opened*)
os=-openedition
;;
-os400*)
os=-os400
;;
-wince*)
os=-wince
;;
-osfrose*)
os=-osfrose
;;
-osf*)
os=-osf
;;
-utek*)
os=-bsd
;;
-dynix*)
os=-bsd
;;
-acis*)
os=-aos
;;
-atheos*)
os=-atheos
;;
-syllable*)
os=-syllable
;;
-386bsd)
os=-bsd
;;
-ctix* | -uts*)
os=-sysv
;;
-nova*)
os=-rtmk-nova
;;
-ns2 )
os=-nextstep2
;;
-nsk*)
os=-nsk
;;
# Preserve the version number of sinix5.
-sinix5.*)
os=`echo $os | sed -e 's|sinix|sysv|'`
;;
-sinix*)
os=-sysv4
;;
-tpf*)
os=-tpf
;;
-triton*)
os=-sysv3
;;
-oss*)
os=-sysv3
;;
-svr4)
os=-sysv4
;;
-svr3)
os=-sysv3
;;
-sysvr4)
os=-sysv4
;;
# This must come after -sysvr4.
-sysv*)
;;
-ose*)
os=-ose
;;
-es1800*)
os=-ose
;;
-xenix)
os=-xenix
;;
-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
os=-mint
;;
-aros*)
os=-aros
;;
-zvmoe)
os=-zvmoe
;;
-dicos*)
os=-dicos
;;
-nacl*)
;;
-none)
;;
*)
# Get rid of the `-' at the beginning of $os.
os=`echo $os | sed 's/[^-]*-//'`
echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
exit 1
;;
esac
else
# Here we handle the default operating systems that come with various machines.
# The value should be what the vendor currently ships out the door with their
# machine or put another way, the most popular os provided with the machine.
# Note that if you're going to try to match "-MANUFACTURER" here (say,
# "-sun"), then you have to tell the case statement up towards the top
# that MANUFACTURER isn't an operating system. Otherwise, code above
# will signal an error saying that MANUFACTURER isn't an operating
# system, and we'll never get to this point.
case $basic_machine in
score-*)
os=-elf
;;
spu-*)
os=-elf
;;
*-acorn)
os=-riscix1.2
;;
arm*-rebel)
os=-linux
;;
arm*-semi)
os=-aout
;;
c4x-* | tic4x-*)
os=-coff
;;
c8051-*)
os=-elf
;;
hexagon-*)
os=-elf
;;
tic54x-*)
os=-coff
;;
tic55x-*)
os=-coff
;;
tic6x-*)
os=-coff
;;
# This must come before the *-dec entry.
pdp10-*)
os=-tops20
;;
pdp11-*)
os=-none
;;
*-dec | vax-*)
os=-ultrix4.2
;;
m68*-apollo)
os=-domain
;;
i386-sun)
os=-sunos4.0.2
;;
m68000-sun)
os=-sunos3
;;
m68*-cisco)
os=-aout
;;
mep-*)
os=-elf
;;
mips*-cisco)
os=-elf
;;
mips*-*)
os=-elf
;;
or1k-*)
os=-elf
;;
or32-*)
os=-coff
;;
*-tti) # must be before sparc entry or we get the wrong os.
os=-sysv3
;;
sparc-* | *-sun)
os=-sunos4.1.1
;;
*-be)
os=-beos
;;
*-haiku)
os=-haiku
;;
*-ibm)
os=-aix
;;
*-knuth)
os=-mmixware
;;
*-wec)
os=-proelf
;;
*-winbond)
os=-proelf
;;
*-oki)
os=-proelf
;;
*-hp)
os=-hpux
;;
*-hitachi)
os=-hiux
;;
i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
os=-sysv
;;
*-cbm)
os=-amigaos
;;
*-dg)
os=-dgux
;;
*-dolphin)
os=-sysv3
;;
m68k-ccur)
os=-rtu
;;
m88k-omron*)
os=-luna
;;
*-next )
os=-nextstep
;;
*-sequent)
os=-ptx
;;
*-crds)
os=-unos
;;
*-ns)
os=-genix
;;
i370-*)
os=-mvs
;;
*-next)
os=-nextstep3
;;
*-gould)
os=-sysv
;;
*-highlevel)
os=-bsd
;;
*-encore)
os=-bsd
;;
*-sgi)
os=-irix
;;
*-siemens)
os=-sysv4
;;
*-masscomp)
os=-rtu
;;
f30[01]-fujitsu | f700-fujitsu)
os=-uxpv
;;
*-rom68k)
os=-coff
;;
*-*bug)
os=-coff
;;
*-apple)
os=-macos
;;
*-atari*)
os=-mint
;;
*)
os=-none
;;
esac
fi
# Here we handle the case where we know the os, and the CPU type, but not the
# manufacturer. We pick the logical manufacturer.
vendor=unknown
case $basic_machine in
*-unknown)
case $os in
-riscix*)
vendor=acorn
;;
-sunos*)
vendor=sun
;;
-cnk*|-aix*)
vendor=ibm
;;
-beos*)
vendor=be
;;
-hpux*)
vendor=hp
;;
-mpeix*)
vendor=hp
;;
-hiux*)
vendor=hitachi
;;
-unos*)
vendor=crds
;;
-dgux*)
vendor=dg
;;
-luna*)
vendor=omron
;;
-genix*)
vendor=ns
;;
-mvs* | -opened*)
vendor=ibm
;;
-os400*)
vendor=ibm
;;
-ptx*)
vendor=sequent
;;
-tpf*)
vendor=ibm
;;
-vxsim* | -vxworks* | -windiss*)
vendor=wrs
;;
-aux*)
vendor=apple
;;
-hms*)
vendor=hitachi
;;
-mpw* | -macos*)
vendor=apple
;;
-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
vendor=atari
;;
-vos*)
vendor=stratus
;;
esac
basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
;;
esac
echo $basic_machine$os
exit
# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "timestamp='"
# time-stamp-format: "%:y-%02m-%02d"
# time-stamp-end: "'"
# End:
libetonyek-0.0.3/FEATURES 0000664 0001750 0001750 00000001753 12250351501 012632 0 ustar jr jr = Format coverage =
== Currently supported ==
* shapes
+ simple shapes
- rectangle
- triangle
- circle
- generic path
+ text shapes
+ parametrizable shapes
- polygon
- star
- arrow
- double-sided arrow
+ transformations
* presentation text
+ formatting attributes
* media
+ images
+ movies and sounds
- just insterted into the output. No fancy stuff like autoplay etc.
* tables
+ structure
+ text cells
+ number cells
- but no numeric formats
* comments aka sticky notes
* (slide) notes
== Planned ==
* shape attributes (background / line)
* the rest of parametrizable shapes
* transitions
* animations
* auto-fitting of presentation text
* better handling of bullet lists
* connectors
* more cell types (date, duration)
== Unlikely to be supported ==
* charts
+ because there is a lot of stuff to do and it is an area I know very
little about
+ it would be best to handle them through a separate API anyway
* formulas in tables
libetonyek-0.0.3/config.h.in 0000664 0001750 0001750 00000006007 12270445730 013523 0 ustar jr jr /* config.h.in. Generated from configure.ac by autoheader. */
/* define if the Boost library is available */
#undef HAVE_BOOST
/* Define to 1 if you have the header file. */
#undef HAVE_BOOST_ANY_HPP
/* Define to 1 if you have the header file. */
#undef HAVE_BOOST_BIND_HPP
/* define if the Boost::Filesystem library is available */
#undef HAVE_BOOST_FILESYSTEM
/* Define to 1 if you have the header file. */
#undef HAVE_BOOST_FUNCTION_HPP
/* Define to 1 if you have the header file. */
#undef HAVE_BOOST_LEXICAL_CAST_HPP
/* Define to 1 if you have the header
file. */
#undef HAVE_BOOST_MATH_CONSTANTS_CONSTANTS_HPP
/* Define to 1 if you have the header
file. */
#undef HAVE_BOOST_NUMERIC_CONVERSION_CAST_HPP
/* Define to 1 if you have the header file. */
#undef HAVE_BOOST_OPTIONAL_HPP
/* Define to 1 if you have the header file. */
#undef HAVE_BOOST_REF_HPP
/* Define to 1 if you have the header file. */
#undef HAVE_BOOST_SCOPED_PTR_HPP
/* Define to 1 if you have the header file. */
#undef HAVE_BOOST_SHARED_PTR_HPP
/* Define to 1 if you have the header
file. */
#undef HAVE_BOOST_SPIRIT_INCLUDE_CLASSIC_CORE_HPP
/* Define to 1 if you have the header file. */
#undef HAVE_BOOST_UNORDERED_MAP_HPP
/* Define to 1 if you have the header file. */
#undef HAVE_DLFCN_H
/* Define to 1 if you have the header file. */
#undef HAVE_INTTYPES_H
/* Define to 1 if you have the header file. */
#undef HAVE_MEMORY_H
/* Define to 1 if you have the header file. */
#undef HAVE_STDINT_H
/* Define to 1 if you have the header file. */
#undef HAVE_STDLIB_H
/* Define to 1 if you have the header file. */
#undef HAVE_STRINGS_H
/* Define to 1 if you have the header file. */
#undef HAVE_STRING_H
/* Define to 1 if you have the header file. */
#undef HAVE_SYS_STAT_H
/* Define to 1 if you have the header file. */
#undef HAVE_SYS_TYPES_H
/* Define to 1 if you have the header file. */
#undef HAVE_UNISTD_H
/* Define to the sub-directory in which libtool stores uninstalled libraries.
*/
#undef LT_OBJDIR
/* Name of package */
#undef PACKAGE
/* Define to the address where bug reports for this package should be sent. */
#undef PACKAGE_BUGREPORT
/* Define to the full name of this package. */
#undef PACKAGE_NAME
/* Define to the full name and version of this package. */
#undef PACKAGE_STRING
/* Define to the one symbol short name of this package. */
#undef PACKAGE_TARNAME
/* Define to the home page for this package. */
#undef PACKAGE_URL
/* Define to the version of this package. */
#undef PACKAGE_VERSION
/* Define to 1 if you have the ANSI C header files. */
#undef STDC_HEADERS
/* Version number of package */
#undef VERSION
libetonyek-0.0.3/src/ 0000775 0001750 0001750 00000000000 12270445763 012272 5 ustar jr jr libetonyek-0.0.3/src/test/ 0000775 0001750 0001750 00000000000 12270445763 013251 5 ustar jr jr libetonyek-0.0.3/src/test/KEYPropertyMapTest.h 0000664 0001750 0001750 00000001657 12250351501 017106 0 ustar jr jr /* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/*
* This file is part of the libetonyek project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*/
#ifndef KEYPROPERTYMAPTEST_H_INCLUDED
#define KEYPROPERTYMAPTEST_H_INCLUDED
#include
#include
namespace test
{
class KEYPropertyMapTest : public CPPUNIT_NS::TestFixture
{
public:
virtual void setUp();
virtual void tearDown();
private:
CPPUNIT_TEST_SUITE(KEYPropertyMapTest);
CPPUNIT_TEST(testLookup);
CPPUNIT_TEST(testLookupWithParent);
CPPUNIT_TEST_SUITE_END();
private:
void testLookup();
void testLookupWithParent();
};
}
#endif // KEYPROPERTYMAPTEST_H_INCLUDED
/* vim:set shiftwidth=2 softtabstop=2 expandtab: */
libetonyek-0.0.3/src/test/test.cpp 0000664 0001750 0001750 00000002526 12250351501 014721 0 ustar jr jr /* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/*
* This file is part of the libetonyek project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*/
#include
#include
#include
#include
#include
#include
#include
int main()
{
// Create the event manager and test controller
CPPUNIT_NS::TestResult controller;
// Add a listener that colllects test result
CPPUNIT_NS::TestResultCollector result;
controller.addListener(&result);
// Add a listener that print dots as test run.
CPPUNIT_NS::BriefTestProgressListener progress;
controller.addListener(&progress);
// Add the top suite to the test runner
CPPUNIT_NS::TestRunner runner;
runner.addTest(CPPUNIT_NS::TestFactoryRegistry::getRegistry().makeTest());
runner.run(controller);
// output
CPPUNIT_NS::CompilerOutputter outputter(&result, std::cerr);
outputter.write();
// return status code
return result.wasSuccessful() ? 0 : 1;
}
/* vim:set shiftwidth=2 softtabstop=2 expandtab: */
libetonyek-0.0.3/src/test/KEYPathTest.h 0000664 0001750 0001750 00000001614 12250351501 015511 0 ustar jr jr /* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/*
* This file is part of the libetonyek project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*/
#ifndef KEYPATHTEST_H_INCLUDED
#define KEYPATHTEST_H_INCLUDED
#include
#include
namespace test
{
class KEYPathTest : public CPPUNIT_NS::TestFixture
{
public:
virtual void setUp();
virtual void tearDown();
private:
CPPUNIT_TEST_SUITE(KEYPathTest);
CPPUNIT_TEST(testConstruction);
CPPUNIT_TEST(testConversion);
CPPUNIT_TEST_SUITE_END();
private:
void testConstruction();
void testConversion();
};
}
#endif // KEYPATHTEST_H_INCLUDED
/* vim:set shiftwidth=2 softtabstop=2 expandtab: */
libetonyek-0.0.3/src/test/KEYStylesTest.cpp 0000664 0001750 0001750 00000013477 12250351501 016445 0 ustar jr jr /* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/*
* This file is part of the libetonyek project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*/
#include "KEYStyles.h"
#include "KEYStylesTest.h"
namespace test
{
using boost::any;
using boost::any_cast;
using boost::get;
using boost::optional;
using boost::shared_ptr;
using boost::unordered_map;
using libetonyek::KEYPropertyMap;
using libetonyek::KEYStyleBase;
using libetonyek::KEYStyleContext;
using libetonyek::KEYStylePtr_t;
using libetonyek::KEYStylesheet;
using libetonyek::KEYStylesheetPtr_t;
using std::string;
namespace
{
class Style;
struct Stylesheet : public KEYStylesheet
{
unordered_map > testStyles;
};
}
namespace
{
class Style : public KEYStyleBase
{
public:
explicit Style(const KEYPropertyMap &props,
const optional &ident = optional(),
const optional &parentIdent = optional());
optional getAnswer(const KEYStyleContext &context = KEYStyleContext()) const;
any get(const char *const prop, bool lookInParent) const;
private:
virtual KEYStylePtr_t find(const KEYStylesheetPtr_t &stylesheet, const std::string &ident) const;
};
Style::Style(const KEYPropertyMap &props, const optional &ident, const optional &parentIdent)
: KEYStyleBase(props, ident, parentIdent)
{
}
optional Style::getAnswer(const KEYStyleContext &context) const
{
optional value;
any prop = lookup("answer", context);
if (!prop.empty())
value = boost::any_cast(prop);
return value;
}
any Style::get(const char *const prop, const bool lookInParent) const
{
return getPropertyMap().get(prop, lookInParent);
}
KEYStylePtr_t Style::find(const KEYStylesheetPtr_t &stylesheet, const std::string &ident) const
{
KEYStylePtr_t style;
const Stylesheet *const testStylesheet = static_cast(stylesheet.get());
// reuse character styles for the test
if (testStylesheet->testStyles.end() != testStylesheet->testStyles.find(ident))
style = testStylesheet->testStyles.find(ident)->second;
return style;
}
}
namespace
{
shared_ptr