netspeed_applet-0.16/0000755000175000017500000000000011402462036011613 500000000000000netspeed_applet-0.16/m4/0000755000175000017500000000000011402462035012132 500000000000000netspeed_applet-0.16/m4/libtool.m40000644000175000017500000077464711402461225014011 00000000000000# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- # # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, # 2006, 2007, 2008 Free Software Foundation, Inc. # Written by Gordon Matzigkeit, 1996 # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. m4_define([_LT_COPYING], [dnl # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, # 2006, 2007, 2008 Free Software Foundation, Inc. # Written by Gordon Matzigkeit, 1996 # # This file is part of GNU Libtool. # # GNU Libtool is free software; you can redistribute it and/or # modify it under the terms of the GNU General Public License as # published by the Free Software Foundation; either version 2 of # the License, or (at your option) any later version. # # As a special exception to the GNU General Public License, # if you distribute this file as part of a program or library that # is built using GNU Libtool, you may include this file under the # same distribution terms that you use for the rest of that program. # # GNU Libtool is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with GNU Libtool; see the file COPYING. If not, a copy # can be downloaded from http://www.gnu.org/licenses/gpl.html, or # obtained by writing to the Free Software Foundation, Inc., # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ]) # serial 56 LT_INIT # LT_PREREQ(VERSION) # ------------------ # Complain and exit if this libtool version is less that VERSION. m4_defun([LT_PREREQ], [m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1, [m4_default([$3], [m4_fatal([Libtool version $1 or higher is required], 63)])], [$2])]) # _LT_CHECK_BUILDDIR # ------------------ # Complain if the absolute build directory name contains unusual characters m4_defun([_LT_CHECK_BUILDDIR], [case `pwd` in *\ * | *\ *) AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;; esac ]) # LT_INIT([OPTIONS]) # ------------------ AC_DEFUN([LT_INIT], [AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT AC_BEFORE([$0], [LT_LANG])dnl AC_BEFORE([$0], [LT_OUTPUT])dnl AC_BEFORE([$0], [LTDL_INIT])dnl m4_require([_LT_CHECK_BUILDDIR])dnl dnl Autoconf doesn't catch unexpanded LT_ macros by default: m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4 dnl unless we require an AC_DEFUNed macro: AC_REQUIRE([LTOPTIONS_VERSION])dnl AC_REQUIRE([LTSUGAR_VERSION])dnl AC_REQUIRE([LTVERSION_VERSION])dnl AC_REQUIRE([LTOBSOLETE_VERSION])dnl m4_require([_LT_PROG_LTMAIN])dnl dnl Parse OPTIONS _LT_SET_OPTIONS([$0], [$1]) # This can be used to rebuild libtool when needed LIBTOOL_DEPS="$ltmain" # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' AC_SUBST(LIBTOOL)dnl _LT_SETUP # Only expand once: m4_define([LT_INIT]) ])# LT_INIT # Old names: AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT]) AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_PROG_LIBTOOL], []) dnl AC_DEFUN([AM_PROG_LIBTOOL], []) # _LT_CC_BASENAME(CC) # ------------------- # Calculate cc_basename. Skip known compiler wrappers and cross-prefix. m4_defun([_LT_CC_BASENAME], [for cc_temp in $1""; do case $cc_temp in compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; \-*) ;; *) break;; esac done cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` ]) # _LT_FILEUTILS_DEFAULTS # ---------------------- # It is okay to use these file commands and assume they have been set # sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'. m4_defun([_LT_FILEUTILS_DEFAULTS], [: ${CP="cp -f"} : ${MV="mv -f"} : ${RM="rm -f"} ])# _LT_FILEUTILS_DEFAULTS # _LT_SETUP # --------- m4_defun([_LT_SETUP], [AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl _LT_DECL([], [host_alias], [0], [The host system])dnl _LT_DECL([], [host], [0])dnl _LT_DECL([], [host_os], [0])dnl dnl _LT_DECL([], [build_alias], [0], [The build system])dnl _LT_DECL([], [build], [0])dnl _LT_DECL([], [build_os], [0])dnl dnl AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([LT_PATH_LD])dnl AC_REQUIRE([LT_PATH_NM])dnl dnl AC_REQUIRE([AC_PROG_LN_S])dnl test -z "$LN_S" && LN_S="ln -s" _LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl dnl AC_REQUIRE([LT_CMD_MAX_LEN])dnl _LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl _LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_CHECK_SHELL_FEATURES])dnl m4_require([_LT_CMD_RELOAD])dnl m4_require([_LT_CHECK_MAGIC_METHOD])dnl m4_require([_LT_CMD_OLD_ARCHIVE])dnl m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl _LT_CONFIG_LIBTOOL_INIT([ # See if we are running on zsh, and set the options which allow our # commands through without removal of \ escapes INIT. if test -n "\${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi ]) if test -n "${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi _LT_CHECK_OBJDIR m4_require([_LT_TAG_COMPILER])dnl _LT_PROG_ECHO_BACKSLASH case $host_os in aix3*) # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi ;; esac # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. sed_quote_subst='s/\([["`$\\]]\)/\\\1/g' # Same as above, but do not quote variable references. double_quote_subst='s/\([["`\\]]\)/\\\1/g' # Sed substitution to delay expansion of an escaped shell variable in a # double_quote_subst'ed string. delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' # Sed substitution to delay expansion of an escaped single quote. delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' # Sed substitution to avoid accidental globbing in evaled expressions no_glob_subst='s/\*/\\\*/g' # Global variables: ofile=libtool can_build_shared=yes # All known linkers require a `.a' archive for static linking (except MSVC, # which needs '.lib'). libext=a with_gnu_ld="$lt_cv_prog_gnu_ld" old_CC="$CC" old_CFLAGS="$CFLAGS" # Set sane defaults for various variables test -z "$CC" && CC=cc test -z "$LTCC" && LTCC=$CC test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS test -z "$LD" && LD=ld test -z "$ac_objext" && ac_objext=o _LT_CC_BASENAME([$compiler]) # Only perform the check for file, if the check method requires it test -z "$MAGIC_CMD" && MAGIC_CMD=file case $deplibs_check_method in file_magic*) if test "$file_magic_cmd" = '$MAGIC_CMD'; then _LT_PATH_MAGIC fi ;; esac # Use C for the default configuration in the libtool script LT_SUPPORTED_TAG([CC]) _LT_LANG_C_CONFIG _LT_LANG_DEFAULT_CONFIG _LT_CONFIG_COMMANDS ])# _LT_SETUP # _LT_PROG_LTMAIN # --------------- # Note that this code is called both from `configure', and `config.status' # now that we use AC_CONFIG_COMMANDS to generate libtool. Notably, # `config.status' has no value for ac_aux_dir unless we are using Automake, # so we pass a copy along to make sure it has a sensible value anyway. m4_defun([_LT_PROG_LTMAIN], [m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl _LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir']) ltmain="$ac_aux_dir/ltmain.sh" ])# _LT_PROG_LTMAIN ## ------------------------------------- ## ## Accumulate code for creating libtool. ## ## ------------------------------------- ## # So that we can recreate a full libtool script including additional # tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS # in macros and then make a single call at the end using the `libtool' # label. # _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS]) # ---------------------------------------- # Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later. m4_define([_LT_CONFIG_LIBTOOL_INIT], [m4_ifval([$1], [m4_append([_LT_OUTPUT_LIBTOOL_INIT], [$1 ])])]) # Initialize. m4_define([_LT_OUTPUT_LIBTOOL_INIT]) # _LT_CONFIG_LIBTOOL([COMMANDS]) # ------------------------------ # Register COMMANDS to be passed to AC_CONFIG_COMMANDS later. m4_define([_LT_CONFIG_LIBTOOL], [m4_ifval([$1], [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS], [$1 ])])]) # Initialize. m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS]) # _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS]) # ----------------------------------------------------- m4_defun([_LT_CONFIG_SAVE_COMMANDS], [_LT_CONFIG_LIBTOOL([$1]) _LT_CONFIG_LIBTOOL_INIT([$2]) ]) # _LT_FORMAT_COMMENT([COMMENT]) # ----------------------------- # Add leading comment marks to the start of each line, and a trailing # full-stop to the whole comment if one is not present already. m4_define([_LT_FORMAT_COMMENT], [m4_ifval([$1], [ m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])], [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.]) )]) ## ------------------------ ## ## FIXME: Eliminate VARNAME ## ## ------------------------ ## # _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?]) # ------------------------------------------------------------------- # CONFIGNAME is the name given to the value in the libtool script. # VARNAME is the (base) name used in the configure script. # VALUE may be 0, 1 or 2 for a computed quote escaped value based on # VARNAME. Any other value will be used directly. m4_define([_LT_DECL], [lt_if_append_uniq([lt_decl_varnames], [$2], [, ], [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name], [m4_ifval([$1], [$1], [$2])]) lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3]) m4_ifval([$4], [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])]) lt_dict_add_subkey([lt_decl_dict], [$2], [tagged?], [m4_ifval([$5], [yes], [no])])]) ]) # _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION]) # -------------------------------------------------------- m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])]) # lt_decl_tag_varnames([SEPARATOR], [VARNAME1...]) # ------------------------------------------------ m4_define([lt_decl_tag_varnames], [_lt_decl_filter([tagged?], [yes], $@)]) # _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..]) # --------------------------------------------------------- m4_define([_lt_decl_filter], [m4_case([$#], [0], [m4_fatal([$0: too few arguments: $#])], [1], [m4_fatal([$0: too few arguments: $#: $1])], [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)], [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)], [lt_dict_filter([lt_decl_dict], $@)])[]dnl ]) # lt_decl_quote_varnames([SEPARATOR], [VARNAME1...]) # -------------------------------------------------- m4_define([lt_decl_quote_varnames], [_lt_decl_filter([value], [1], $@)]) # lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...]) # --------------------------------------------------- m4_define([lt_decl_dquote_varnames], [_lt_decl_filter([value], [2], $@)]) # lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...]) # --------------------------------------------------- m4_define([lt_decl_varnames_tagged], [m4_assert([$# <= 2])dnl _$0(m4_quote(m4_default([$1], [[, ]])), m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]), m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))]) m4_define([_lt_decl_varnames_tagged], [m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])]) # lt_decl_all_varnames([SEPARATOR], [VARNAME1...]) # ------------------------------------------------ m4_define([lt_decl_all_varnames], [_$0(m4_quote(m4_default([$1], [[, ]])), m4_if([$2], [], m4_quote(lt_decl_varnames), m4_quote(m4_shift($@))))[]dnl ]) m4_define([_lt_decl_all_varnames], [lt_join($@, lt_decl_varnames_tagged([$1], lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl ]) # _LT_CONFIG_STATUS_DECLARE([VARNAME]) # ------------------------------------ # Quote a variable value, and forward it to `config.status' so that its # declaration there will have the same value as in `configure'. VARNAME # must have a single quote delimited value for this to work. m4_define([_LT_CONFIG_STATUS_DECLARE], [$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`']) # _LT_CONFIG_STATUS_DECLARATIONS # ------------------------------ # We delimit libtool config variables with single quotes, so when # we write them to config.status, we have to be sure to quote all # embedded single quotes properly. In configure, this macro expands # each variable declared with _LT_DECL (and _LT_TAGDECL) into: # # ='`$ECHO "X$" | $Xsed -e "$delay_single_quote_subst"`' m4_defun([_LT_CONFIG_STATUS_DECLARATIONS], [m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames), [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])]) # _LT_LIBTOOL_TAGS # ---------------- # Output comment and list of tags supported by the script m4_defun([_LT_LIBTOOL_TAGS], [_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl available_tags="_LT_TAGS"dnl ]) # _LT_LIBTOOL_DECLARE(VARNAME, [TAG]) # ----------------------------------- # Extract the dictionary values for VARNAME (optionally with TAG) and # expand to a commented shell variable setting: # # # Some comment about what VAR is for. # visible_name=$lt_internal_name m4_define([_LT_LIBTOOL_DECLARE], [_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [description])))[]dnl m4_pushdef([_libtool_name], m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])), [0], [_libtool_name=[$]$1], [1], [_libtool_name=$lt_[]$1], [2], [_libtool_name=$lt_[]$1], [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl ]) # _LT_LIBTOOL_CONFIG_VARS # ----------------------- # Produce commented declarations of non-tagged libtool config variables # suitable for insertion in the LIBTOOL CONFIG section of the `libtool' # script. Tagged libtool config variables (even for the LIBTOOL CONFIG # section) are produced by _LT_LIBTOOL_TAG_VARS. m4_defun([_LT_LIBTOOL_CONFIG_VARS], [m4_foreach([_lt_var], m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)), [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])]) # _LT_LIBTOOL_TAG_VARS(TAG) # ------------------------- m4_define([_LT_LIBTOOL_TAG_VARS], [m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames), [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])]) # _LT_TAGVAR(VARNAME, [TAGNAME]) # ------------------------------ m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])]) # _LT_CONFIG_COMMANDS # ------------------- # Send accumulated output to $CONFIG_STATUS. Thanks to the lists of # variables for single and double quote escaping we saved from calls # to _LT_DECL, we can put quote escaped variables declarations # into `config.status', and then the shell code to quote escape them in # for loops in `config.status'. Finally, any additional code accumulated # from calls to _LT_CONFIG_LIBTOOL_INIT is expanded. m4_defun([_LT_CONFIG_COMMANDS], [AC_PROVIDE_IFELSE([LT_OUTPUT], dnl If the libtool generation code has been placed in $CONFIG_LT, dnl instead of duplicating it all over again into config.status, dnl then we will have config.status run $CONFIG_LT later, so it dnl needs to know what name is stored there: [AC_CONFIG_COMMANDS([libtool], [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])], dnl If the libtool generation code is destined for config.status, dnl expand the accumulated commands and init code now: [AC_CONFIG_COMMANDS([libtool], [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])]) ])#_LT_CONFIG_COMMANDS # Initialize. m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT], [ # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH sed_quote_subst='$sed_quote_subst' double_quote_subst='$double_quote_subst' delay_variable_subst='$delay_variable_subst' _LT_CONFIG_STATUS_DECLARATIONS LTCC='$LTCC' LTCFLAGS='$LTCFLAGS' compiler='$compiler_DEFAULT' # Quote evaled strings. for var in lt_decl_all_varnames([[ \ ]], lt_decl_quote_varnames); do case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in *[[\\\\\\\`\\"\\\$]]*) eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ;; esac done # Double-quote double-evaled strings. for var in lt_decl_all_varnames([[ \ ]], lt_decl_dquote_varnames); do case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in *[[\\\\\\\`\\"\\\$]]*) eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ;; esac done # Fix-up fallback echo if it was mangled by the above quoting rules. case \$lt_ECHO in *'\\\[$]0 --fallback-echo"')dnl " lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0 --fallback-echo"\[$]/\[$]0 --fallback-echo"/'\` ;; esac _LT_OUTPUT_LIBTOOL_INIT ]) # LT_OUTPUT # --------- # This macro allows early generation of the libtool script (before # AC_OUTPUT is called), incase it is used in configure for compilation # tests. AC_DEFUN([LT_OUTPUT], [: ${CONFIG_LT=./config.lt} AC_MSG_NOTICE([creating $CONFIG_LT]) cat >"$CONFIG_LT" <<_LTEOF #! $SHELL # Generated by $as_me. # Run this file to recreate a libtool stub with the current configuration. lt_cl_silent=false SHELL=\${CONFIG_SHELL-$SHELL} _LTEOF cat >>"$CONFIG_LT" <<\_LTEOF AS_SHELL_SANITIZE _AS_PREPARE exec AS_MESSAGE_FD>&1 exec AS_MESSAGE_LOG_FD>>config.log { echo AS_BOX([Running $as_me.]) } >&AS_MESSAGE_LOG_FD lt_cl_help="\ \`$as_me' creates a local libtool stub from the current configuration, for use in further configure time tests before the real libtool is generated. Usage: $[0] [[OPTIONS]] -h, --help print this help, then exit -V, --version print version number, then exit -q, --quiet do not print progress messages -d, --debug don't remove temporary files Report bugs to ." lt_cl_version="\ m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION]) configured by $[0], generated by m4_PACKAGE_STRING. Copyright (C) 2008 Free Software Foundation, Inc. This config.lt script is free software; the Free Software Foundation gives unlimited permision to copy, distribute and modify it." while test $[#] != 0 do case $[1] in --version | --v* | -V ) echo "$lt_cl_version"; exit 0 ;; --help | --h* | -h ) echo "$lt_cl_help"; exit 0 ;; --debug | --d* | -d ) debug=: ;; --quiet | --q* | --silent | --s* | -q ) lt_cl_silent=: ;; -*) AC_MSG_ERROR([unrecognized option: $[1] Try \`$[0] --help' for more information.]) ;; *) AC_MSG_ERROR([unrecognized argument: $[1] Try \`$[0] --help' for more information.]) ;; esac shift done if $lt_cl_silent; then exec AS_MESSAGE_FD>/dev/null fi _LTEOF cat >>"$CONFIG_LT" <<_LTEOF _LT_OUTPUT_LIBTOOL_COMMANDS_INIT _LTEOF cat >>"$CONFIG_LT" <<\_LTEOF AC_MSG_NOTICE([creating $ofile]) _LT_OUTPUT_LIBTOOL_COMMANDS AS_EXIT(0) _LTEOF chmod +x "$CONFIG_LT" # configure is writing to config.log, but config.lt does its own redirection, # appending to config.log, which fails on DOS, as config.log is still kept # open by configure. Here we exec the FD to /dev/null, effectively closing # config.log, so it can be properly (re)opened and appended to by config.lt. if test "$no_create" != yes; then lt_cl_success=: test "$silent" = yes && lt_config_lt_args="$lt_config_lt_args --quiet" exec AS_MESSAGE_LOG_FD>/dev/null $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false exec AS_MESSAGE_LOG_FD>>config.log $lt_cl_success || AS_EXIT(1) fi ])# LT_OUTPUT # _LT_CONFIG(TAG) # --------------- # If TAG is the built-in tag, create an initial libtool script with a # default configuration from the untagged config vars. Otherwise add code # to config.status for appending the configuration named by TAG from the # matching tagged config vars. m4_defun([_LT_CONFIG], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl _LT_CONFIG_SAVE_COMMANDS([ m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl m4_if(_LT_TAG, [C], [ # See if we are running on zsh, and set the options which allow our # commands through without removal of \ escapes. if test -n "${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi cfgfile="${ofile}T" trap "$RM \"$cfgfile\"; exit 1" 1 2 15 $RM "$cfgfile" cat <<_LT_EOF >> "$cfgfile" #! $SHELL # `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. # Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: # NOTE: Changes made to this file will be lost: look at ltmain.sh. # _LT_COPYING _LT_LIBTOOL_TAGS # ### BEGIN LIBTOOL CONFIG _LT_LIBTOOL_CONFIG_VARS _LT_LIBTOOL_TAG_VARS # ### END LIBTOOL CONFIG _LT_EOF case $host_os in aix3*) cat <<\_LT_EOF >> "$cfgfile" # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi _LT_EOF ;; esac _LT_PROG_LTMAIN # We use sed instead of cat because bash on DJGPP gets confused if # if finds mixed CR/LF and LF-only lines. Since sed operates in # text mode, it properly converts lines to CR/LF. This bash problem # is reportedly fixed, but why not run on old versions too? sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \ || (rm -f "$cfgfile"; exit 1) _LT_PROG_XSI_SHELLFNS sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \ || (rm -f "$cfgfile"; exit 1) mv -f "$cfgfile" "$ofile" || (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") chmod +x "$ofile" ], [cat <<_LT_EOF >> "$ofile" dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded dnl in a comment (ie after a #). # ### BEGIN LIBTOOL TAG CONFIG: $1 _LT_LIBTOOL_TAG_VARS(_LT_TAG) # ### END LIBTOOL TAG CONFIG: $1 _LT_EOF ])dnl /m4_if ], [m4_if([$1], [], [ PACKAGE='$PACKAGE' VERSION='$VERSION' TIMESTAMP='$TIMESTAMP' RM='$RM' ofile='$ofile'], []) ])dnl /_LT_CONFIG_SAVE_COMMANDS ])# _LT_CONFIG # LT_SUPPORTED_TAG(TAG) # --------------------- # Trace this macro to discover what tags are supported by the libtool # --tag option, using: # autoconf --trace 'LT_SUPPORTED_TAG:$1' AC_DEFUN([LT_SUPPORTED_TAG], []) # C support is built-in for now m4_define([_LT_LANG_C_enabled], []) m4_define([_LT_TAGS], []) # LT_LANG(LANG) # ------------- # Enable libtool support for the given language if not already enabled. AC_DEFUN([LT_LANG], [AC_BEFORE([$0], [LT_OUTPUT])dnl m4_case([$1], [C], [_LT_LANG(C)], [C++], [_LT_LANG(CXX)], [Java], [_LT_LANG(GCJ)], [Fortran 77], [_LT_LANG(F77)], [Fortran], [_LT_LANG(FC)], [Windows Resource], [_LT_LANG(RC)], [m4_ifdef([_LT_LANG_]$1[_CONFIG], [_LT_LANG($1)], [m4_fatal([$0: unsupported language: "$1"])])])dnl ])# LT_LANG # _LT_LANG(LANGNAME) # ------------------ m4_defun([_LT_LANG], [m4_ifdef([_LT_LANG_]$1[_enabled], [], [LT_SUPPORTED_TAG([$1])dnl m4_append([_LT_TAGS], [$1 ])dnl m4_define([_LT_LANG_]$1[_enabled], [])dnl _LT_LANG_$1_CONFIG($1)])dnl ])# _LT_LANG # _LT_LANG_DEFAULT_CONFIG # ----------------------- m4_defun([_LT_LANG_DEFAULT_CONFIG], [AC_PROVIDE_IFELSE([AC_PROG_CXX], [LT_LANG(CXX)], [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])]) AC_PROVIDE_IFELSE([AC_PROG_F77], [LT_LANG(F77)], [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])]) AC_PROVIDE_IFELSE([AC_PROG_FC], [LT_LANG(FC)], [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])]) dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal dnl pulling things in needlessly. AC_PROVIDE_IFELSE([AC_PROG_GCJ], [LT_LANG(GCJ)], [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], [LT_LANG(GCJ)], [AC_PROVIDE_IFELSE([LT_PROG_GCJ], [LT_LANG(GCJ)], [m4_ifdef([AC_PROG_GCJ], [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])]) m4_ifdef([A][M_PROG_GCJ], [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])]) m4_ifdef([LT_PROG_GCJ], [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])]) AC_PROVIDE_IFELSE([LT_PROG_RC], [LT_LANG(RC)], [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])]) ])# _LT_LANG_DEFAULT_CONFIG # Obsolete macros: AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)]) AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)]) AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)]) AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_CXX], []) dnl AC_DEFUN([AC_LIBTOOL_F77], []) dnl AC_DEFUN([AC_LIBTOOL_FC], []) dnl AC_DEFUN([AC_LIBTOOL_GCJ], []) # _LT_TAG_COMPILER # ---------------- m4_defun([_LT_TAG_COMPILER], [AC_REQUIRE([AC_PROG_CC])dnl _LT_DECL([LTCC], [CC], [1], [A C compiler])dnl _LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl _LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl _LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} # If no C compiler flags were specified, use CFLAGS. LTCFLAGS=${LTCFLAGS-"$CFLAGS"} # Allow CC to be a program name with arguments. compiler=$CC ])# _LT_TAG_COMPILER # _LT_COMPILER_BOILERPLATE # ------------------------ # Check for compiler boilerplate output or warnings with # the simple compiler test code. m4_defun([_LT_COMPILER_BOILERPLATE], [m4_require([_LT_DECL_SED])dnl ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" >conftest.$ac_ext eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_compiler_boilerplate=`cat conftest.err` $RM conftest* ])# _LT_COMPILER_BOILERPLATE # _LT_LINKER_BOILERPLATE # ---------------------- # Check for linker boilerplate output or warnings with # the simple link test code. m4_defun([_LT_LINKER_BOILERPLATE], [m4_require([_LT_DECL_SED])dnl ac_outfile=conftest.$ac_objext echo "$lt_simple_link_test_code" >conftest.$ac_ext eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_linker_boilerplate=`cat conftest.err` $RM -r conftest* ])# _LT_LINKER_BOILERPLATE # _LT_REQUIRED_DARWIN_CHECKS # ------------------------- m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[ case $host_os in rhapsody* | darwin*) AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:]) AC_CHECK_TOOL([NMEDIT], [nmedit], [:]) AC_CHECK_TOOL([LIPO], [lipo], [:]) AC_CHECK_TOOL([OTOOL], [otool], [:]) AC_CHECK_TOOL([OTOOL64], [otool64], [:]) _LT_DECL([], [DSYMUTIL], [1], [Tool to manipulate archived DWARF debug symbol files on Mac OS X]) _LT_DECL([], [NMEDIT], [1], [Tool to change global to local symbols on Mac OS X]) _LT_DECL([], [LIPO], [1], [Tool to manipulate fat objects and archives on Mac OS X]) _LT_DECL([], [OTOOL], [1], [ldd/readelf like tool for Mach-O binaries on Mac OS X]) _LT_DECL([], [OTOOL64], [1], [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4]) AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod], [lt_cv_apple_cc_single_mod=no if test -z "${LT_MULTI_MODULE}"; then # By default we will add the -single_module flag. You can override # by either setting the environment variable LT_MULTI_MODULE # non-empty at configure time, or by adding -multi_module to the # link flags. rm -rf libconftest.dylib* echo "int foo(void){return 1;}" > conftest.c echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ -dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err _lt_result=$? if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then lt_cv_apple_cc_single_mod=yes else cat conftest.err >&AS_MESSAGE_LOG_FD fi rm -rf libconftest.dylib* rm -f conftest.* fi]) AC_CACHE_CHECK([for -exported_symbols_list linker flag], [lt_cv_ld_exported_symbols_list], [lt_cv_ld_exported_symbols_list=no save_LDFLAGS=$LDFLAGS echo "_main" > conftest.sym LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], [lt_cv_ld_exported_symbols_list=yes], [lt_cv_ld_exported_symbols_list=no]) LDFLAGS="$save_LDFLAGS" ]) case $host_os in rhapsody* | darwin1.[[012]]) _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; darwin1.*) _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; darwin*) # darwin 5.x on # if running on 10.5 or later, the deployment target defaults # to the OS version, if on x86, and 10.4, the deployment # target defaults to 10.4. Don't you love it? case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*) _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; 10.[[012]]*) _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; 10.*) _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; esac ;; esac if test "$lt_cv_apple_cc_single_mod" = "yes"; then _lt_dar_single_mod='$single_module' fi if test "$lt_cv_ld_exported_symbols_list" = "yes"; then _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' else _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' fi if test "$DSYMUTIL" != ":"; then _lt_dsymutil='~$DSYMUTIL $lib || :' else _lt_dsymutil= fi ;; esac ]) # _LT_DARWIN_LINKER_FEATURES # -------------------------- # Checks for linker and compiler features on darwin m4_defun([_LT_DARWIN_LINKER_FEATURES], [ m4_require([_LT_REQUIRED_DARWIN_CHECKS]) _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_automatic, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported _LT_TAGVAR(whole_archive_flag_spec, $1)='' _LT_TAGVAR(link_all_deplibs, $1)=yes _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined" case $cc_basename in ifort*) _lt_dar_can_shared=yes ;; *) _lt_dar_can_shared=$GCC ;; esac if test "$_lt_dar_can_shared" = "yes"; then output_verbose_link_cmd=echo _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" m4_if([$1], [CXX], [ if test "$lt_cv_apple_cc_single_mod" != "yes"; then _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" fi ],[]) else _LT_TAGVAR(ld_shlibs, $1)=no fi ]) # _LT_SYS_MODULE_PATH_AIX # ----------------------- # Links a minimal program and checks the executable # for the system default hardcoded library path. In most cases, # this is /usr/lib:/lib, but when the MPI compilers are used # the location of the communication and MPI libs are included too. # If we don't find anything, use the default library path according # to the aix ld manual. m4_defun([_LT_SYS_MODULE_PATH_AIX], [m4_require([_LT_DECL_SED])dnl AC_LINK_IFELSE(AC_LANG_PROGRAM,[ lt_aix_libpath_sed=' /Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/ p } }' aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi],[]) if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ])# _LT_SYS_MODULE_PATH_AIX # _LT_SHELL_INIT(ARG) # ------------------- m4_define([_LT_SHELL_INIT], [ifdef([AC_DIVERSION_NOTICE], [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], [AC_DIVERT_PUSH(NOTICE)]) $1 AC_DIVERT_POP ])# _LT_SHELL_INIT # _LT_PROG_ECHO_BACKSLASH # ----------------------- # Add some code to the start of the generated configure script which # will find an echo command which doesn't interpret backslashes. m4_defun([_LT_PROG_ECHO_BACKSLASH], [_LT_SHELL_INIT([ # Check that we are running under the correct shell. SHELL=${CONFIG_SHELL-/bin/sh} case X$lt_ECHO in X*--fallback-echo) # Remove one level of quotation (which was required for Make). ECHO=`echo "$lt_ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` ;; esac ECHO=${lt_ECHO-echo} if test "X[$]1" = X--no-reexec; then # Discard the --no-reexec flag, and continue. shift elif test "X[$]1" = X--fallback-echo; then # Avoid inline document here, it may be left over : elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then # Yippee, $ECHO works! : else # Restart under the correct shell. exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} fi if test "X[$]1" = X--fallback-echo; then # used as fallback echo shift cat <<_LT_EOF [$]* _LT_EOF exit 0 fi # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH if test -z "$lt_ECHO"; then if test "X${echo_test_string+set}" != Xset; then # find a string as large as possible, as long as the shell can cope with it for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... if { echo_test_string=`eval $cmd`; } 2>/dev/null && { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null then break fi done fi if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then : else # The Solaris, AIX, and Digital Unix default echo programs unquote # backslashes. This makes it impossible to quote backslashes using # echo "$something" | sed 's/\\/\\\\/g' # # So, first we look for a working echo in the user's PATH. lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for dir in $PATH /usr/ucb; do IFS="$lt_save_ifs" if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then ECHO="$dir/echo" break fi done IFS="$lt_save_ifs" if test "X$ECHO" = Xecho; then # We didn't find a better echo, so look for alternatives. if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' && echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then # This shell has a builtin print -r that does the trick. ECHO='print -r' elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } && test "X$CONFIG_SHELL" != X/bin/ksh; then # If we have ksh, try running configure again with it. ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} export ORIGINAL_CONFIG_SHELL CONFIG_SHELL=/bin/ksh export CONFIG_SHELL exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} else # Try using printf. ECHO='printf %s\n' if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then # Cool, printf works : elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && test "X$echo_testing_string" = 'X\t' && echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL export CONFIG_SHELL SHELL="$CONFIG_SHELL" export SHELL ECHO="$CONFIG_SHELL [$]0 --fallback-echo" elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && test "X$echo_testing_string" = 'X\t' && echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then ECHO="$CONFIG_SHELL [$]0 --fallback-echo" else # maybe with a smaller string... prev=: for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null then break fi prev="$cmd" done if test "$prev" != 'sed 50q "[$]0"'; then echo_test_string=`eval $prev` export echo_test_string exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} else # Oops. We lost completely, so just stick with echo. ECHO=echo fi fi fi fi fi fi # Copy echo and quote the copy suitably for passing to libtool from # the Makefile, instead of quoting the original, which is used later. lt_ECHO=$ECHO if test "X$lt_ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then lt_ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" fi AC_SUBST(lt_ECHO) ]) _LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts]) _LT_DECL([], [ECHO], [1], [An echo program that does not interpret backslashes]) ])# _LT_PROG_ECHO_BACKSLASH # _LT_ENABLE_LOCK # --------------- m4_defun([_LT_ENABLE_LOCK], [AC_ARG_ENABLE([libtool-lock], [AS_HELP_STRING([--disable-libtool-lock], [avoid locking (might break parallel builds)])]) test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes # Some flags need to be propagated to the compiler or linker for good # libtool support. case $host in ia64-*-hpux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case `/usr/bin/file conftest.$ac_objext` in *ELF-32*) HPUX_IA64_MODE="32" ;; *ELF-64*) HPUX_IA64_MODE="64" ;; esac fi rm -rf conftest* ;; *-*-irix6*) # Find out which ABI we are using. echo '[#]line __oline__ "configure"' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then if test "$lt_cv_prog_gnu_ld" = yes; then case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -melf32bsmip" ;; *N32*) LD="${LD-ld} -melf32bmipn32" ;; *64-bit*) LD="${LD-ld} -melf64bmip" ;; esac else case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -32" ;; *N32*) LD="${LD-ld} -n32" ;; *64-bit*) LD="${LD-ld} -64" ;; esac fi fi rm -rf conftest* ;; x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ s390*-*linux*|s390*-*tpf*|sparc*-*linux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case `/usr/bin/file conftest.o` in *32-bit*) case $host in x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_i386_fbsd" ;; x86_64-*linux*) LD="${LD-ld} -m elf_i386" ;; ppc64-*linux*|powerpc64-*linux*) LD="${LD-ld} -m elf32ppclinux" ;; s390x-*linux*) LD="${LD-ld} -m elf_s390" ;; sparc64-*linux*) LD="${LD-ld} -m elf32_sparc" ;; esac ;; *64-bit*) case $host in x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_x86_64_fbsd" ;; x86_64-*linux*) LD="${LD-ld} -m elf_x86_64" ;; ppc*-*linux*|powerpc*-*linux*) LD="${LD-ld} -m elf64ppc" ;; s390*-*linux*|s390*-*tpf*) LD="${LD-ld} -m elf64_s390" ;; sparc*-*linux*) LD="${LD-ld} -m elf64_sparc" ;; esac ;; esac fi rm -rf conftest* ;; *-*-sco3.2v5*) # On SCO OpenServer 5, we need -belf to get full-featured binaries. SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, [AC_LANG_PUSH(C) AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) AC_LANG_POP]) if test x"$lt_cv_cc_needs_belf" != x"yes"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf CFLAGS="$SAVE_CFLAGS" fi ;; sparc*-*solaris*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case `/usr/bin/file conftest.o` in *64-bit*) case $lt_cv_prog_gnu_ld in yes*) LD="${LD-ld} -m elf64_sparc" ;; *) if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then LD="${LD-ld} -64" fi ;; esac ;; esac fi rm -rf conftest* ;; esac need_locks="$enable_libtool_lock" ])# _LT_ENABLE_LOCK # _LT_CMD_OLD_ARCHIVE # ------------------- m4_defun([_LT_CMD_OLD_ARCHIVE], [AC_CHECK_TOOL(AR, ar, false) test -z "$AR" && AR=ar test -z "$AR_FLAGS" && AR_FLAGS=cru _LT_DECL([], [AR], [1], [The archiver]) _LT_DECL([], [AR_FLAGS], [1]) AC_CHECK_TOOL(STRIP, strip, :) test -z "$STRIP" && STRIP=: _LT_DECL([], [STRIP], [1], [A symbol stripping program]) AC_CHECK_TOOL(RANLIB, ranlib, :) test -z "$RANLIB" && RANLIB=: _LT_DECL([], [RANLIB], [1], [Commands used to install an old-style archive]) # Determine commands to create old-style static archives. old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' old_postinstall_cmds='chmod 644 $oldlib' old_postuninstall_cmds= if test -n "$RANLIB"; then case $host_os in openbsd*) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" ;; *) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" ;; esac old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" fi _LT_DECL([], [old_postinstall_cmds], [2]) _LT_DECL([], [old_postuninstall_cmds], [2]) _LT_TAGDECL([], [old_archive_cmds], [2], [Commands used to build an old-style archive]) ])# _LT_CMD_OLD_ARCHIVE # _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, # [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) # ---------------------------------------------------------------- # Check whether the given compiler option works AC_DEFUN([_LT_COMPILER_OPTION], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_SED])dnl AC_CACHE_CHECK([$1], [$2], [$2=no m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="$3" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&AS_MESSAGE_LOG_FD echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then $2=yes fi fi $RM conftest* ]) if test x"[$]$2" = xyes; then m4_if([$5], , :, [$5]) else m4_if([$6], , :, [$6]) fi ])# _LT_COMPILER_OPTION # Old name: AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], []) # _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, # [ACTION-SUCCESS], [ACTION-FAILURE]) # ---------------------------------------------------- # Check whether the given linker option works AC_DEFUN([_LT_LINKER_OPTION], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_SED])dnl AC_CACHE_CHECK([$1], [$2], [$2=no save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS $3" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then # The linker can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&AS_MESSAGE_LOG_FD $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then $2=yes fi else $2=yes fi fi $RM -r conftest* LDFLAGS="$save_LDFLAGS" ]) if test x"[$]$2" = xyes; then m4_if([$4], , :, [$4]) else m4_if([$5], , :, [$5]) fi ])# _LT_LINKER_OPTION # Old name: AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], []) # LT_CMD_MAX_LEN #--------------- AC_DEFUN([LT_CMD_MAX_LEN], [AC_REQUIRE([AC_CANONICAL_HOST])dnl # find the maximum length of command line arguments AC_MSG_CHECKING([the maximum length of command line arguments]) AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl i=0 teststring="ABCD" case $build_os in msdosdjgpp*) # On DJGPP, this test can blow up pretty badly due to problems in libc # (any single argument exceeding 2000 bytes causes a buffer overrun # during glob expansion). Even if it were fixed, the result of this # check would be larger than it should be. lt_cv_sys_max_cmd_len=12288; # 12K is about right ;; gnu*) # Under GNU Hurd, this test is not required because there is # no limit to the length of command line arguments. # Libtool will interpret -1 as no limit whatsoever lt_cv_sys_max_cmd_len=-1; ;; cygwin* | mingw* | cegcc*) # On Win9x/ME, this test blows up -- it succeeds, but takes # about 5 minutes as the teststring grows exponentially. # Worse, since 9x/ME are not pre-emptively multitasking, # you end up with a "frozen" computer, even though with patience # the test eventually succeeds (with a max line length of 256k). # Instead, let's just punt: use the minimum linelength reported by # all of the supported platforms: 8192 (on NT/2K/XP). lt_cv_sys_max_cmd_len=8192; ;; amigaos*) # On AmigaOS with pdksh, this test takes hours, literally. # So we just punt and use a minimum line length of 8192. lt_cv_sys_max_cmd_len=8192; ;; netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) # This has been around since 386BSD, at least. Likely further. if test -x /sbin/sysctl; then lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` elif test -x /usr/sbin/sysctl; then lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` else lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs fi # And add a safety zone lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ;; interix*) # We know the value 262144 and hardcode it with a safety zone (like BSD) lt_cv_sys_max_cmd_len=196608 ;; osf*) # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not # nice to cause kernel panics so lets avoid the loop below. # First set a reasonable default. lt_cv_sys_max_cmd_len=16384 # if test -x /sbin/sysconfig; then case `/sbin/sysconfig -q proc exec_disable_arg_limit` in *1*) lt_cv_sys_max_cmd_len=-1 ;; esac fi ;; sco3.2v5*) lt_cv_sys_max_cmd_len=102400 ;; sysv5* | sco5v6* | sysv4.2uw2*) kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` if test -n "$kargmax"; then lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` else lt_cv_sys_max_cmd_len=32768 fi ;; *) lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` if test -n "$lt_cv_sys_max_cmd_len"; then lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` else # Make teststring a little bigger before we do anything with it. # a 1K string should be a reasonable start. for i in 1 2 3 4 5 6 7 8 ; do teststring=$teststring$teststring done SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} # If test is not a shell built-in, we'll probably end up computing a # maximum length that is only half of the actual maximum length, but # we can't tell. while { test "X"`$SHELL [$]0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \ = "XX$teststring$teststring"; } >/dev/null 2>&1 && test $i != 17 # 1/2 MB should be enough do i=`expr $i + 1` teststring=$teststring$teststring done # Only check the string length outside the loop. lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` teststring= # Add a significant safety factor because C++ compilers can tack on # massive amounts of additional arguments before passing them to the # linker. It appears as though 1/2 is a usable value. lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` fi ;; esac ]) if test -n $lt_cv_sys_max_cmd_len ; then AC_MSG_RESULT($lt_cv_sys_max_cmd_len) else AC_MSG_RESULT(none) fi max_cmd_len=$lt_cv_sys_max_cmd_len _LT_DECL([], [max_cmd_len], [0], [What is the maximum length of a command?]) ])# LT_CMD_MAX_LEN # Old name: AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], []) # _LT_HEADER_DLFCN # ---------------- m4_defun([_LT_HEADER_DLFCN], [AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl ])# _LT_HEADER_DLFCN # _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, # ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) # ---------------------------------------------------------------- m4_defun([_LT_TRY_DLOPEN_SELF], [m4_require([_LT_HEADER_DLFCN])dnl if test "$cross_compiling" = yes; then : [$4] else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF [#line __oline__ "configure" #include "confdefs.h" #if HAVE_DLFCN_H #include #endif #include #ifdef RTLD_GLOBAL # define LT_DLGLOBAL RTLD_GLOBAL #else # ifdef DL_GLOBAL # define LT_DLGLOBAL DL_GLOBAL # else # define LT_DLGLOBAL 0 # endif #endif /* We may have to define LT_DLLAZY_OR_NOW in the command line if we find out it does not work in some platform. */ #ifndef LT_DLLAZY_OR_NOW # ifdef RTLD_LAZY # define LT_DLLAZY_OR_NOW RTLD_LAZY # else # ifdef DL_LAZY # define LT_DLLAZY_OR_NOW DL_LAZY # else # ifdef RTLD_NOW # define LT_DLLAZY_OR_NOW RTLD_NOW # else # ifdef DL_NOW # define LT_DLLAZY_OR_NOW DL_NOW # else # define LT_DLLAZY_OR_NOW 0 # endif # endif # endif # endif #endif void fnord() { int i=42;} int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); int status = $lt_dlunknown; if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; /* dlclose (self); */ } else puts (dlerror ()); return status; }] _LT_EOF if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) $1 ;; x$lt_dlneed_uscore) $2 ;; x$lt_dlunknown|x*) $3 ;; esac else : # compilation failed $3 fi fi rm -fr conftest* ])# _LT_TRY_DLOPEN_SELF # LT_SYS_DLOPEN_SELF # ------------------ AC_DEFUN([LT_SYS_DLOPEN_SELF], [m4_require([_LT_HEADER_DLFCN])dnl if test "x$enable_dlopen" != xyes; then enable_dlopen=unknown enable_dlopen_self=unknown enable_dlopen_self_static=unknown else lt_cv_dlopen=no lt_cv_dlopen_libs= case $host_os in beos*) lt_cv_dlopen="load_add_on" lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ;; mingw* | pw32* | cegcc*) lt_cv_dlopen="LoadLibrary" lt_cv_dlopen_libs= ;; cygwin*) lt_cv_dlopen="dlopen" lt_cv_dlopen_libs= ;; darwin*) # if libdl is installed we need to link against it AC_CHECK_LIB([dl], [dlopen], [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ lt_cv_dlopen="dyld" lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ]) ;; *) AC_CHECK_FUNC([shl_load], [lt_cv_dlopen="shl_load"], [AC_CHECK_LIB([dld], [shl_load], [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"], [AC_CHECK_FUNC([dlopen], [lt_cv_dlopen="dlopen"], [AC_CHECK_LIB([dl], [dlopen], [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], [AC_CHECK_LIB([svld], [dlopen], [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], [AC_CHECK_LIB([dld], [dld_link], [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"]) ]) ]) ]) ]) ]) ;; esac if test "x$lt_cv_dlopen" != xno; then enable_dlopen=yes else enable_dlopen=no fi case $lt_cv_dlopen in dlopen) save_CPPFLAGS="$CPPFLAGS" test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" save_LDFLAGS="$LDFLAGS" wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" save_LIBS="$LIBS" LIBS="$lt_cv_dlopen_libs $LIBS" AC_CACHE_CHECK([whether a program can dlopen itself], lt_cv_dlopen_self, [dnl _LT_TRY_DLOPEN_SELF( lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) ]) if test "x$lt_cv_dlopen_self" = xyes; then wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" AC_CACHE_CHECK([whether a statically linked program can dlopen itself], lt_cv_dlopen_self_static, [dnl _LT_TRY_DLOPEN_SELF( lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) ]) fi CPPFLAGS="$save_CPPFLAGS" LDFLAGS="$save_LDFLAGS" LIBS="$save_LIBS" ;; esac case $lt_cv_dlopen_self in yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; *) enable_dlopen_self=unknown ;; esac case $lt_cv_dlopen_self_static in yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; *) enable_dlopen_self_static=unknown ;; esac fi _LT_DECL([dlopen_support], [enable_dlopen], [0], [Whether dlopen is supported]) _LT_DECL([dlopen_self], [enable_dlopen_self], [0], [Whether dlopen of programs is supported]) _LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0], [Whether dlopen of statically linked programs is supported]) ])# LT_SYS_DLOPEN_SELF # Old name: AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], []) # _LT_COMPILER_C_O([TAGNAME]) # --------------------------- # Check to see if options -c and -o are simultaneously supported by compiler. # This macro does not hard code the compiler like AC_PROG_CC_C_O. m4_defun([_LT_COMPILER_C_O], [m4_require([_LT_DECL_SED])dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_TAG_COMPILER])dnl AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)], [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no $RM -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&AS_MESSAGE_LOG_FD echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes fi fi chmod u+w . 2>&AS_MESSAGE_LOG_FD $RM conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files $RM out/* && rmdir out cd .. $RM -r conftest $RM conftest* ]) _LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1], [Does compiler simultaneously support -c and -o options?]) ])# _LT_COMPILER_C_O # _LT_COMPILER_FILE_LOCKS([TAGNAME]) # ---------------------------------- # Check to see if we can do hard links to lock some files if needed m4_defun([_LT_COMPILER_FILE_LOCKS], [m4_require([_LT_ENABLE_LOCK])dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl _LT_COMPILER_C_O([$1]) hard_links="nottested" if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then # do not overwrite the value of need_locks provided by the user AC_MSG_CHECKING([if we can lock with hard links]) hard_links=yes $RM conftest* ln conftest.a conftest.b 2>/dev/null && hard_links=no touch conftest.a ln conftest.a conftest.b 2>&5 || hard_links=no ln conftest.a conftest.b 2>/dev/null && hard_links=no AC_MSG_RESULT([$hard_links]) if test "$hard_links" = no; then AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) need_locks=warn fi else need_locks=no fi _LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?]) ])# _LT_COMPILER_FILE_LOCKS # _LT_CHECK_OBJDIR # ---------------- m4_defun([_LT_CHECK_OBJDIR], [AC_CACHE_CHECK([for objdir], [lt_cv_objdir], [rm -f .libs 2>/dev/null mkdir .libs 2>/dev/null if test -d .libs; then lt_cv_objdir=.libs else # MS-DOS does not allow filenames that begin with a dot. lt_cv_objdir=_libs fi rmdir .libs 2>/dev/null]) objdir=$lt_cv_objdir _LT_DECL([], [objdir], [0], [The name of the directory that contains temporary libtool files])dnl m4_pattern_allow([LT_OBJDIR])dnl AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/", [Define to the sub-directory in which libtool stores uninstalled libraries.]) ])# _LT_CHECK_OBJDIR # _LT_LINKER_HARDCODE_LIBPATH([TAGNAME]) # -------------------------------------- # Check hardcoding attributes. m4_defun([_LT_LINKER_HARDCODE_LIBPATH], [AC_MSG_CHECKING([how to hardcode library paths into programs]) _LT_TAGVAR(hardcode_action, $1)= if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" || test -n "$_LT_TAGVAR(runpath_var, $1)" || test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then # We can hardcode non-existent directories. if test "$_LT_TAGVAR(hardcode_direct, $1)" != no && # If the only mechanism to avoid hardcoding is shlibpath_var, we # have to relink, otherwise we might link with an installed library # when we should be linking with a yet-to-be-installed one ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no && test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then # Linking always hardcodes the temporary library directory. _LT_TAGVAR(hardcode_action, $1)=relink else # We can link without hardcoding, and we can hardcode nonexisting dirs. _LT_TAGVAR(hardcode_action, $1)=immediate fi else # We cannot hardcode anything, or else we can only hardcode existing # directories. _LT_TAGVAR(hardcode_action, $1)=unsupported fi AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)]) if test "$_LT_TAGVAR(hardcode_action, $1)" = relink || test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then # Fast installation is not supported enable_fast_install=no elif test "$shlibpath_overrides_runpath" = yes || test "$enable_shared" = no; then # Fast installation is not necessary enable_fast_install=needless fi _LT_TAGDECL([], [hardcode_action], [0], [How to hardcode a shared library path into an executable]) ])# _LT_LINKER_HARDCODE_LIBPATH # _LT_CMD_STRIPLIB # ---------------- m4_defun([_LT_CMD_STRIPLIB], [m4_require([_LT_DECL_EGREP]) striplib= old_striplib= AC_MSG_CHECKING([whether stripping libraries is possible]) if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" test -z "$striplib" && striplib="$STRIP --strip-unneeded" AC_MSG_RESULT([yes]) else # FIXME - insert some real tests, host_os isn't really good enough case $host_os in darwin*) if test -n "$STRIP" ; then striplib="$STRIP -x" old_striplib="$STRIP -S" AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) fi ;; *) AC_MSG_RESULT([no]) ;; esac fi _LT_DECL([], [old_striplib], [1], [Commands to strip libraries]) _LT_DECL([], [striplib], [1]) ])# _LT_CMD_STRIPLIB # _LT_SYS_DYNAMIC_LINKER([TAG]) # ----------------------------- # PORTME Fill in your ld.so characteristics m4_defun([_LT_SYS_DYNAMIC_LINKER], [AC_REQUIRE([AC_CANONICAL_HOST])dnl m4_require([_LT_DECL_EGREP])dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_OBJDUMP])dnl m4_require([_LT_DECL_SED])dnl AC_MSG_CHECKING([dynamic linker characteristics]) m4_if([$1], [], [ if test "$GCC" = yes; then case $host_os in darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; *) lt_awk_arg="/^libraries:/" ;; esac lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"` if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then # if the path contains ";" then we assume it to be the separator # otherwise default to the standard path separator (i.e. ":") - it is # assumed that no part of a normal pathname contains ";" but that should # okay in the real world where ";" in dirpaths is itself problematic. lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'` else lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi # Ok, now we have the path, separated by spaces, we can step through it # and add multilib dir if necessary. lt_tmp_lt_search_path_spec= lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` for lt_sys_path in $lt_search_path_spec; do if test -d "$lt_sys_path/$lt_multi_os_dir"; then lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" else test -d "$lt_sys_path" && \ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" fi done lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk ' BEGIN {RS=" "; FS="/|\n";} { lt_foo=""; lt_count=0; for (lt_i = NF; lt_i > 0; lt_i--) { if ($lt_i != "" && $lt_i != ".") { if ($lt_i == "..") { lt_count++; } else { if (lt_count == 0) { lt_foo="/" $lt_i lt_foo; } else { lt_count--; } } } } if (lt_foo != "") { lt_freq[[lt_foo]]++; } if (lt_freq[[lt_foo]] == 1) { print lt_foo; } }'` sys_lib_search_path_spec=`$ECHO $lt_search_path_spec` else sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" fi]) library_names_spec= libname_spec='lib$name' soname_spec= shrext_cmds=".so" postinstall_cmds= postuninstall_cmds= finish_cmds= finish_eval= shlibpath_var= shlibpath_overrides_runpath=unknown version_type=none dynamic_linker="$host_os ld.so" sys_lib_dlsearch_path_spec="/lib /usr/lib" need_lib_prefix=unknown hardcode_into_libs=no # when you set need_version to no, make sure it does not cause -set_version # flags to be left without arguments need_version=unknown case $host_os in aix3*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' shlibpath_var=LIBPATH # AIX 3 has no versioning support, so we append a major version to the name. soname_spec='${libname}${release}${shared_ext}$major' ;; aix[[4-9]]*) version_type=linux need_lib_prefix=no need_version=no hardcode_into_libs=yes if test "$host_cpu" = ia64; then # AIX 5 supports IA64 library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH else # With GCC up to 2.95.x, collect2 would create an import file # for dependence libraries. The import file would start with # the line `#! .'. This would cause the generated library to # depend on `.', always an invalid library. This was fixed in # development snapshots of GCC prior to 3.0. case $host_os in aix4 | aix4.[[01]] | aix4.[[01]].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then : else can_build_shared=no fi ;; esac # AIX (on Power*) has no versioning support, so currently we can not hardcode correct # soname into executable. Probably we can add versioning support to # collect2, so additional links can be useful in future. if test "$aix_use_runtimelinking" = yes; then # If using run time linking (on AIX 4.2 or later) use lib.so # instead of lib.a to let people know that these are not # typical AIX shared libraries. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' else # We preserve .a as extension for shared libraries through AIX4.2 # and later when we are not doing run time linking. library_names_spec='${libname}${release}.a $libname.a' soname_spec='${libname}${release}${shared_ext}$major' fi shlibpath_var=LIBPATH fi ;; amigaos*) case $host_cpu in powerpc) # Since July 2007 AmigaOS4 officially supports .so libraries. # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ;; m68k) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; esac ;; beos*) library_names_spec='${libname}${shared_ext}' dynamic_linker="$host_os ld.so" shlibpath_var=LIBRARY_PATH ;; bsdi[[45]]*) version_type=linux need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" # the default ld.so.conf also contains /usr/contrib/lib and # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow # libtool to hard-code these into programs ;; cygwin* | mingw* | pw32* | cegcc*) version_type=windows shrext_cmds=".dll" need_version=no need_lib_prefix=no case $GCC,$host_os in yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*) library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname~ chmod a+x \$dldir/$dlname~ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; fi' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $RM \$dlpath' shlibpath_overrides_runpath=yes case $host_os in cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" ;; mingw* | cegcc*) # MinGW DLLs use traditional 'lib' prefix soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then # It is most probably a Windows format PATH printed by # mingw gcc, but we are running on Cygwin. Gcc prints its search # path with ; separators, and with drive letters. We can handle the # drive letters (cygwin fileutils understands them), so leave them, # especially as we might pass files found there to a mingw objdump, # which wouldn't understand a cygwinified path. Ahh. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` else sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' ;; esac ;; *) library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' ;; esac dynamic_linker='Win32 ld.exe' # FIXME: first we should search . and the directory the executable is in shlibpath_var=PATH ;; darwin* | rhapsody*) dynamic_linker="$host_os dyld" version_type=darwin need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' soname_spec='${libname}${release}${major}$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' m4_if([$1], [],[ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ;; dgux*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; freebsd1*) dynamic_linker=no ;; freebsd* | dragonfly*) # DragonFly does not have aout. When/if they implement a new # versioning mechanism, adjust this. if test -x /usr/bin/objformat; then objformat=`/usr/bin/objformat` else case $host_os in freebsd[[123]]*) objformat=aout ;; *) objformat=elf ;; esac fi version_type=freebsd-$objformat case $version_type in freebsd-elf*) library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' need_version=no need_lib_prefix=no ;; freebsd-*) library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' need_version=yes ;; esac shlibpath_var=LD_LIBRARY_PATH case $host_os in freebsd2*) shlibpath_overrides_runpath=yes ;; freebsd3.[[01]]* | freebsdelf3.[[01]]*) shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \ freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1) shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; *) # from 4.6 on, and DragonFly shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; esac ;; gnu*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH hardcode_into_libs=yes ;; hpux9* | hpux10* | hpux11*) # Give a soname corresponding to the major version so that dld.sl refuses to # link against other versions. version_type=sunos need_lib_prefix=no need_version=no case $host_cpu in ia64*) shrext_cmds='.so' hardcode_into_libs=yes dynamic_linker="$host_os dld.so" shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' if test "X$HPUX_IA64_MODE" = X32; then sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" else sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" fi sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; hppa*64*) shrext_cmds='.sl' hardcode_into_libs=yes dynamic_linker="$host_os dld.sl" shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; *) shrext_cmds='.sl' dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' ;; esac # HP-UX runs *really* slowly unless shared libraries are mode 555. postinstall_cmds='chmod 555 $lib' ;; interix[[3-9]]*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; irix5* | irix6* | nonstopux*) case $host_os in nonstopux*) version_type=nonstopux ;; *) if test "$lt_cv_prog_gnu_ld" = yes; then version_type=linux else version_type=irix fi ;; esac need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' case $host_os in irix5* | nonstopux*) libsuff= shlibsuff= ;; *) case $LD in # libtool.m4 will add one of these switches to LD *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= libmagic=32-bit;; *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 libmagic=64-bit;; *) libsuff= shlibsuff= libmagic=never-match;; esac ;; esac shlibpath_var=LD_LIBRARY${shlibsuff}_PATH shlibpath_overrides_runpath=no sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" hardcode_into_libs=yes ;; # No shared lib support for Linux oldld, aout, or coff. linux*oldld* | linux*aout* | linux*coff*) dynamic_linker=no ;; # This must be Linux ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no # Some binutils ld are patched to set DT_RUNPATH save_LDFLAGS=$LDFLAGS save_libdir=$libdir eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \ LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\"" AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null], [shlibpath_overrides_runpath=yes])]) LDFLAGS=$save_LDFLAGS libdir=$save_libdir # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" fi # We used to test for /lib/ld.so.1 and disable shared libraries on # powerpc, because MkLinux only supported shared libraries with the # GNU dynamic linker. Since this was broken with cross compilers, # most powerpc-linux boxes support dynamic linking these days and # people can always --disable-shared, the test was removed, and we # assume the GNU/Linux dynamic linker is in use. dynamic_linker='GNU/Linux ld.so' ;; netbsdelf*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='NetBSD ld.elf_so' ;; netbsd*) version_type=sunos need_lib_prefix=no need_version=no if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='NetBSD ld.elf_so' fi shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; newsos6) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; *nto* | *qnx*) version_type=qnx need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='ldqnx.so' ;; openbsd*) version_type=sunos sys_lib_dlsearch_path_spec="/usr/lib" need_lib_prefix=no # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. case $host_os in openbsd3.3 | openbsd3.3.*) need_version=yes ;; *) need_version=no ;; esac library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then case $host_os in openbsd2.[[89]] | openbsd2.[[89]].*) shlibpath_overrides_runpath=no ;; *) shlibpath_overrides_runpath=yes ;; esac else shlibpath_overrides_runpath=yes fi ;; os2*) libname_spec='$name' shrext_cmds=".dll" need_lib_prefix=no library_names_spec='$libname${shared_ext} $libname.a' dynamic_linker='OS/2 ld.exe' shlibpath_var=LIBPATH ;; osf3* | osf4* | osf5*) version_type=osf need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ;; rdos*) dynamic_linker=no ;; solaris*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes # ldd complains unless libraries are executable postinstall_cmds='chmod +x $lib' ;; sunos4*) version_type=sunos library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes if test "$with_gnu_ld" = yes; then need_lib_prefix=no fi need_version=yes ;; sysv4 | sysv4.3*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH case $host_vendor in sni) shlibpath_overrides_runpath=no need_lib_prefix=no runpath_var=LD_RUN_PATH ;; siemens) need_lib_prefix=no ;; motorola) need_lib_prefix=no need_version=no shlibpath_overrides_runpath=no sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ;; esac ;; sysv4*MP*) if test -d /usr/nec ;then version_type=linux library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' soname_spec='$libname${shared_ext}.$major' shlibpath_var=LD_LIBRARY_PATH fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) version_type=freebsd-elf need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes if test "$with_gnu_ld" = yes; then sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' else sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' case $host_os in sco3.2v5*) sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ;; esac fi sys_lib_dlsearch_path_spec='/usr/lib' ;; tpf*) # TPF is a cross-target only. Preferred cross-host = GNU/Linux. version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; uts4*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; *) dynamic_linker=no ;; esac AC_MSG_RESULT([$dynamic_linker]) test "$dynamic_linker" = no && can_build_shared=no variables_saved_for_relink="PATH $shlibpath_var $runpath_var" if test "$GCC" = yes; then variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" fi if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" fi _LT_DECL([], [variables_saved_for_relink], [1], [Variables whose values should be saved in libtool wrapper scripts and restored at link time]) _LT_DECL([], [need_lib_prefix], [0], [Do we need the "lib" prefix for modules?]) _LT_DECL([], [need_version], [0], [Do we need a version for libraries?]) _LT_DECL([], [version_type], [0], [Library versioning type]) _LT_DECL([], [runpath_var], [0], [Shared library runtime path variable]) _LT_DECL([], [shlibpath_var], [0],[Shared library path variable]) _LT_DECL([], [shlibpath_overrides_runpath], [0], [Is shlibpath searched before the hard-coded library search path?]) _LT_DECL([], [libname_spec], [1], [Format of library name prefix]) _LT_DECL([], [library_names_spec], [1], [[List of archive names. First name is the real one, the rest are links. The last name is the one that the linker finds with -lNAME]]) _LT_DECL([], [soname_spec], [1], [[The coded name of the library, if different from the real name]]) _LT_DECL([], [postinstall_cmds], [2], [Command to use after installation of a shared archive]) _LT_DECL([], [postuninstall_cmds], [2], [Command to use after uninstallation of a shared archive]) _LT_DECL([], [finish_cmds], [2], [Commands used to finish a libtool library installation in a directory]) _LT_DECL([], [finish_eval], [1], [[As "finish_cmds", except a single script fragment to be evaled but not shown]]) _LT_DECL([], [hardcode_into_libs], [0], [Whether we should hardcode library paths into libraries]) _LT_DECL([], [sys_lib_search_path_spec], [2], [Compile-time system search path for libraries]) _LT_DECL([], [sys_lib_dlsearch_path_spec], [2], [Run-time system search path for libraries]) ])# _LT_SYS_DYNAMIC_LINKER # _LT_PATH_TOOL_PREFIX(TOOL) # -------------------------- # find a file program which can recognize shared library AC_DEFUN([_LT_PATH_TOOL_PREFIX], [m4_require([_LT_DECL_EGREP])dnl AC_MSG_CHECKING([for $1]) AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, [case $MAGIC_CMD in [[\\/*] | ?:[\\/]*]) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ;; *) lt_save_MAGIC_CMD="$MAGIC_CMD" lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR dnl $ac_dummy forces splitting on constant user-supplied paths. dnl POSIX.2 word splitting is done only on the output of word expansions, dnl not every word. This closes a longstanding sh security hole. ac_dummy="m4_if([$2], , $PATH, [$2])" for ac_dir in $ac_dummy; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$1; then lt_cv_path_MAGIC_CMD="$ac_dir/$1" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then : else cat <<_LT_EOF 1>&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org _LT_EOF fi ;; esac fi break fi done IFS="$lt_save_ifs" MAGIC_CMD="$lt_save_MAGIC_CMD" ;; esac]) MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then AC_MSG_RESULT($MAGIC_CMD) else AC_MSG_RESULT(no) fi _LT_DECL([], [MAGIC_CMD], [0], [Used to examine libraries when file_magic_cmd begins with "file"])dnl ])# _LT_PATH_TOOL_PREFIX # Old name: AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], []) # _LT_PATH_MAGIC # -------------- # find a file program which can recognize a shared library m4_defun([_LT_PATH_MAGIC], [_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) if test -z "$lt_cv_path_MAGIC_CMD"; then if test -n "$ac_tool_prefix"; then _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) else MAGIC_CMD=: fi fi ])# _LT_PATH_MAGIC # LT_PATH_LD # ---------- # find the pathname to the GNU or non-GNU linker AC_DEFUN([LT_PATH_LD], [AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl m4_require([_LT_DECL_SED])dnl m4_require([_LT_DECL_EGREP])dnl AC_ARG_WITH([gnu-ld], [AS_HELP_STRING([--with-gnu-ld], [assume the C compiler uses GNU ld @<:@default=no@:>@])], [test "$withval" = no || with_gnu_ld=yes], [with_gnu_ld=no])dnl ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. AC_MSG_CHECKING([for ld used by $CC]) case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [[\\/]]* | ?:[[\\/]]*) re_direlt='/[[^/]][[^/]]*/\.\./' # Canonicalize the pathname of ld ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then AC_MSG_CHECKING([for GNU ld]) else AC_MSG_CHECKING([for non-GNU ld]) fi AC_CACHE_VAL(lt_cv_path_LD, [if test -z "$LD"; then lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some variants of GNU ld only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$lt_cv_path_LD" -v 2>&1 &1 /dev/null 2>&1; then lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' lt_cv_file_magic_cmd='func_win32_libid' else lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' lt_cv_file_magic_cmd='$OBJDUMP -f' fi ;; cegcc) # use the weaker test based on 'objdump'. See mingw*. lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' lt_cv_file_magic_cmd='$OBJDUMP -f' ;; darwin* | rhapsody*) lt_cv_deplibs_check_method=pass_all ;; freebsd* | dragonfly*) if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then case $host_cpu in i*86 ) # Not sure whether the presence of OpenBSD here was a mistake. # Let's accept both of them until this is cleared up. lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ;; esac else lt_cv_deplibs_check_method=pass_all fi ;; gnu*) lt_cv_deplibs_check_method=pass_all ;; hpux10.20* | hpux11*) lt_cv_file_magic_cmd=/usr/bin/file case $host_cpu in ia64*) lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so ;; hppa*64*) [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'] lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl ;; *) lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' lt_cv_file_magic_test_file=/usr/lib/libc.sl ;; esac ;; interix[[3-9]]*) # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$' ;; irix5* | irix6* | nonstopux*) case $LD in *-32|*"-32 ") libmagic=32-bit;; *-n32|*"-n32 ") libmagic=N32;; *-64|*"-64 ") libmagic=64-bit;; *) libmagic=never-match;; esac lt_cv_deplibs_check_method=pass_all ;; # This must be Linux ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu) lt_cv_deplibs_check_method=pass_all ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' fi ;; newos6*) lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=/usr/lib/libnls.so ;; *nto* | *qnx*) lt_cv_deplibs_check_method=pass_all ;; openbsd*) if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' fi ;; osf3* | osf4* | osf5*) lt_cv_deplibs_check_method=pass_all ;; rdos*) lt_cv_deplibs_check_method=pass_all ;; solaris*) lt_cv_deplibs_check_method=pass_all ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) lt_cv_deplibs_check_method=pass_all ;; sysv4 | sysv4.3*) case $host_vendor in motorola) lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ;; ncr) lt_cv_deplibs_check_method=pass_all ;; sequent) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;; sni) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" lt_cv_file_magic_test_file=/lib/libc.so ;; siemens) lt_cv_deplibs_check_method=pass_all ;; pc) lt_cv_deplibs_check_method=pass_all ;; esac ;; tpf*) lt_cv_deplibs_check_method=pass_all ;; esac ]) file_magic_cmd=$lt_cv_file_magic_cmd deplibs_check_method=$lt_cv_deplibs_check_method test -z "$deplibs_check_method" && deplibs_check_method=unknown _LT_DECL([], [deplibs_check_method], [1], [Method to check whether dependent libraries are shared objects]) _LT_DECL([], [file_magic_cmd], [1], [Command to use when deplibs_check_method == "file_magic"]) ])# _LT_CHECK_MAGIC_METHOD # LT_PATH_NM # ---------- # find the pathname to a BSD- or MS-compatible name lister AC_DEFUN([LT_PATH_NM], [AC_REQUIRE([AC_PROG_CC])dnl AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM, [if test -n "$NM"; then # Let the user override the test. lt_cv_path_NM="$NM" else lt_nm_to_check="${ac_tool_prefix}nm" if test -n "$ac_tool_prefix" && test "$build" = "$host"; then lt_nm_to_check="$lt_nm_to_check nm" fi for lt_tmp_nm in $lt_nm_to_check; do lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. tmp_nm="$ac_dir/$lt_tmp_nm" if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then # Check to see if the nm accepts a BSD-compat flag. # Adding the `sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored # Tru64's nm complains that /dev/null is an invalid object file case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in */dev/null* | *'Invalid file or object type'*) lt_cv_path_NM="$tmp_nm -B" break ;; *) case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in */dev/null*) lt_cv_path_NM="$tmp_nm -p" break ;; *) lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but continue # so that we can try to find one that supports BSD flags ;; esac ;; esac fi done IFS="$lt_save_ifs" done : ${lt_cv_path_NM=no} fi]) if test "$lt_cv_path_NM" != "no"; then NM="$lt_cv_path_NM" else # Didn't find any BSD compatible name lister, look for dumpbin. AC_CHECK_TOOLS(DUMPBIN, ["dumpbin -symbols" "link -dump -symbols"], :) AC_SUBST([DUMPBIN]) if test "$DUMPBIN" != ":"; then NM="$DUMPBIN" fi fi test -z "$NM" && NM=nm AC_SUBST([NM]) _LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface], [lt_cv_nm_interface="BSD nm" echo "int some_variable = 0;" > conftest.$ac_ext (eval echo "\"\$as_me:__oline__: $ac_compile\"" >&AS_MESSAGE_LOG_FD) (eval "$ac_compile" 2>conftest.err) cat conftest.err >&AS_MESSAGE_LOG_FD (eval echo "\"\$as_me:__oline__: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD) (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) cat conftest.err >&AS_MESSAGE_LOG_FD (eval echo "\"\$as_me:__oline__: output\"" >&AS_MESSAGE_LOG_FD) cat conftest.out >&AS_MESSAGE_LOG_FD if $GREP 'External.*some_variable' conftest.out > /dev/null; then lt_cv_nm_interface="MS dumpbin" fi rm -f conftest*]) ])# LT_PATH_NM # Old names: AU_ALIAS([AM_PROG_NM], [LT_PATH_NM]) AU_ALIAS([AC_PROG_NM], [LT_PATH_NM]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AM_PROG_NM], []) dnl AC_DEFUN([AC_PROG_NM], []) # LT_LIB_M # -------- # check for math library AC_DEFUN([LT_LIB_M], [AC_REQUIRE([AC_CANONICAL_HOST])dnl LIBM= case $host in *-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*) # These system don't have libm, or don't need it ;; *-ncr-sysv4.3*) AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") ;; *) AC_CHECK_LIB(m, cos, LIBM="-lm") ;; esac AC_SUBST([LIBM]) ])# LT_LIB_M # Old name: AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_CHECK_LIBM], []) # _LT_COMPILER_NO_RTTI([TAGNAME]) # ------------------------------- m4_defun([_LT_COMPILER_NO_RTTI], [m4_require([_LT_TAG_COMPILER])dnl _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= if test "$GCC" = yes; then _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], lt_cv_prog_compiler_rtti_exceptions, [-fno-rtti -fno-exceptions], [], [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) fi _LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1], [Compiler flag to turn off builtin functions]) ])# _LT_COMPILER_NO_RTTI # _LT_CMD_GLOBAL_SYMBOLS # ---------------------- m4_defun([_LT_CMD_GLOBAL_SYMBOLS], [AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([LT_PATH_NM])dnl AC_REQUIRE([LT_PATH_LD])dnl m4_require([_LT_DECL_SED])dnl m4_require([_LT_DECL_EGREP])dnl m4_require([_LT_TAG_COMPILER])dnl # Check for command to grab the raw symbol name followed by C symbol from nm. AC_MSG_CHECKING([command to parse $NM output from $compiler object]) AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], [ # These are sane defaults that work on at least a few old systems. # [They come from Ultrix. What could be older than Ultrix?!! ;)] # Character class describing NM global symbol codes. symcode='[[BCDEGRST]]' # Regexp to match symbols that can be accessed directly from C. sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' # Define system-specific variables. case $host_os in aix*) symcode='[[BCDT]]' ;; cygwin* | mingw* | pw32* | cegcc*) symcode='[[ABCDGISTW]]' ;; hpux*) if test "$host_cpu" = ia64; then symcode='[[ABCDEGRST]]' fi ;; irix* | nonstopux*) symcode='[[BCDEGRST]]' ;; osf*) symcode='[[BCDEGQRST]]' ;; solaris*) symcode='[[BDRT]]' ;; sco3.2v5*) symcode='[[DT]]' ;; sysv4.2uw2*) symcode='[[DT]]' ;; sysv5* | sco5v6* | unixware* | OpenUNIX*) symcode='[[ABDT]]' ;; sysv4) symcode='[[DFNSTU]]' ;; esac # If we're using GNU nm, then use its standard symbol codes. case `$NM -V 2>&1` in *GNU* | *'with BFD'*) symcode='[[ABCDGIRSTW]]' ;; esac # Transform an extracted symbol line into a proper C declaration. # Some systems (esp. on ia64) link data and code symbols differently, # so use this general approach. lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" # Transform an extracted symbol line into symbol name and symbol address lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'" lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'" # Handle CRLF in mingw tool chain opt_cr= case $build_os in mingw*) opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp ;; esac # Try without a prefix underscore, then with it. for ac_symprfx in "" "_"; do # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. symxfrm="\\1 $ac_symprfx\\2 \\2" # Write the raw and C identifiers. if test "$lt_cv_nm_interface" = "MS dumpbin"; then # Fake it for dumpbin and say T for any non-static function # and D for any global variable. # Also find C++ and __fastcall symbols from MSVC++, # which start with @ or ?. lt_cv_sys_global_symbol_pipe="$AWK ['"\ " {last_section=section; section=\$ 3};"\ " /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ " \$ 0!~/External *\|/{next};"\ " / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ " {if(hide[section]) next};"\ " {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ " {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ " s[1]~/^[@?]/{print s[1], s[1]; next};"\ " s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ " ' prfx=^$ac_symprfx]" else lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" fi # Check to see that the pipe works correctly. pipe_works=no rm -f conftest* cat > conftest.$ac_ext <<_LT_EOF #ifdef __cplusplus extern "C" { #endif char nm_test_var; void nm_test_func(void); void nm_test_func(void){} #ifdef __cplusplus } #endif int main(){nm_test_var='a';nm_test_func();return(0);} _LT_EOF if AC_TRY_EVAL(ac_compile); then # Now try to grab the symbols. nlist=conftest.nm if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then # Try sorting and uniquifying the output. if sort "$nlist" | uniq > "$nlist"T; then mv -f "$nlist"T "$nlist" else rm -f "$nlist"T fi # Make sure that we snagged all the symbols we need. if $GREP ' nm_test_var$' "$nlist" >/dev/null; then if $GREP ' nm_test_func$' "$nlist" >/dev/null; then cat <<_LT_EOF > conftest.$ac_ext #ifdef __cplusplus extern "C" { #endif _LT_EOF # Now generate the symbol file. eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' cat <<_LT_EOF >> conftest.$ac_ext /* The mapping between symbol names and symbols. */ const struct { const char *name; void *address; } lt__PROGRAM__LTX_preloaded_symbols[[]] = { { "@PROGRAM@", (void *) 0 }, _LT_EOF $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext cat <<\_LT_EOF >> conftest.$ac_ext {0, (void *) 0} }; /* This works around a problem in FreeBSD linker */ #ifdef FREEBSD_WORKAROUND static const void *lt_preloaded_setup() { return lt__PROGRAM__LTX_preloaded_symbols; } #endif #ifdef __cplusplus } #endif _LT_EOF # Now try linking the two files. mv conftest.$ac_objext conftstm.$ac_objext lt_save_LIBS="$LIBS" lt_save_CFLAGS="$CFLAGS" LIBS="conftstm.$ac_objext" CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then pipe_works=yes fi LIBS="$lt_save_LIBS" CFLAGS="$lt_save_CFLAGS" else echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD fi else echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD fi else echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD fi else echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD cat conftest.$ac_ext >&5 fi rm -rf conftest* conftst* # Do not use the global_symbol_pipe unless it works. if test "$pipe_works" = yes; then break else lt_cv_sys_global_symbol_pipe= fi done ]) if test -z "$lt_cv_sys_global_symbol_pipe"; then lt_cv_sys_global_symbol_to_cdecl= fi if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then AC_MSG_RESULT(failed) else AC_MSG_RESULT(ok) fi _LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1], [Take the output of nm and produce a listing of raw symbols and C names]) _LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1], [Transform the output of nm in a proper C declaration]) _LT_DECL([global_symbol_to_c_name_address], [lt_cv_sys_global_symbol_to_c_name_address], [1], [Transform the output of nm in a C name address pair]) _LT_DECL([global_symbol_to_c_name_address_lib_prefix], [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1], [Transform the output of nm in a C name address pair when lib prefix is needed]) ]) # _LT_CMD_GLOBAL_SYMBOLS # _LT_COMPILER_PIC([TAGNAME]) # --------------------------- m4_defun([_LT_COMPILER_PIC], [m4_require([_LT_TAG_COMPILER])dnl _LT_TAGVAR(lt_prog_compiler_wl, $1)= _LT_TAGVAR(lt_prog_compiler_pic, $1)= _LT_TAGVAR(lt_prog_compiler_static, $1)= AC_MSG_CHECKING([for $compiler option to produce PIC]) m4_if([$1], [CXX], [ # C++ specific cases for pic, static, wl, etc. if test "$GXX" = yes; then _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' case $host_os in aix*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; m68k) # FIXME: we need at least 68020 code to build shared libraries, but # adding the `-m68020' flag to GCC prevents building anything better, # like `-m68040'. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' ;; esac ;; beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; mingw* | cygwin* | os2* | pw32* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries m4_if([$1], [GCJ], [], [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' ;; *djgpp*) # DJGPP does not support shared libraries at all _LT_TAGVAR(lt_prog_compiler_pic, $1)= ;; interix[[3-9]]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. # Instead, we relocate shared libraries at runtime. ;; sysv4*MP*) if test -d /usr/nec; then _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic fi ;; hpux*) # PIC is the default for 64-bit PA HP-UX, but not for 32-bit # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag # sets the default TLS model and affects inlining. case $host_cpu in hppa*64*) ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac ;; *qnx* | *nto*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac else case $host_os in aix[[4-9]]*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' else _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' fi ;; chorus*) case $cc_basename in cxch68*) # Green Hills C++ Compiler # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" ;; esac ;; dgux*) case $cc_basename in ec++*) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ;; ghcx*) # Green Hills C++ Compiler _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ;; *) ;; esac ;; freebsd* | dragonfly*) # FreeBSD uses GNU C++ ;; hpux9* | hpux10* | hpux11*) case $cc_basename in CC*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' if test "$host_cpu" != ia64; then _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' fi ;; aCC*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' ;; esac ;; *) ;; esac ;; interix*) # This is c89, which is MS Visual C++ (no shared libs) # Anyone wants to do a port? ;; irix5* | irix6* | nonstopux*) case $cc_basename in CC*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' # CC pic flag -KPIC is the default. ;; *) ;; esac ;; linux* | k*bsd*-gnu | kopensolaris*-gnu) case $cc_basename in KCC*) # KAI C++ Compiler _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; ecpc* ) # old Intel C++ for x86_64 which still supported -KPIC. _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; icpc* ) # Intel C++, used to be incompatible with GCC. # ICC 10 doesn't accept -KPIC any more. _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; pgCC* | pgcpp*) # Portland Group C++ compiler _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; cxx*) # Compaq C++ # Make sure the PIC flag is empty. It appears that all Alpha # Linux and Compaq Tru64 Unix objects are PIC. _LT_TAGVAR(lt_prog_compiler_pic, $1)= _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; xlc* | xlC*) # IBM XL 8.0 on PPC _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ;; esac ;; esac ;; lynxos*) ;; m88k*) ;; mvs*) case $cc_basename in cxx*) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' ;; *) ;; esac ;; netbsd* | netbsdelf*-gnu) ;; *qnx* | *nto*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ;; osf3* | osf4* | osf5*) case $cc_basename in KCC*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' ;; RCC*) # Rational C++ 2.4.1 _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ;; cxx*) # Digital/Compaq C++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # Make sure the PIC flag is empty. It appears that all Alpha # Linux and Compaq Tru64 Unix objects are PIC. _LT_TAGVAR(lt_prog_compiler_pic, $1)= _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; *) ;; esac ;; psos*) ;; solaris*) case $cc_basename in CC*) # Sun C++ 4.2, 5.x and Centerline C++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ;; gcx*) # Green Hills C++ Compiler _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' ;; *) ;; esac ;; sunos4*) case $cc_basename in CC*) # Sun C++ 4.x _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; lcc*) # Lucid _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ;; *) ;; esac ;; sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) case $cc_basename in CC*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; esac ;; tandem*) case $cc_basename in NCC*) # NonStop-UX NCC 3.20 _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ;; *) ;; esac ;; vxworks*) ;; *) _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ;; esac fi ], [ if test "$GCC" = yes; then _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' case $host_os in aix*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; m68k) # FIXME: we need at least 68020 code to build shared libraries, but # adding the `-m68020' flag to GCC prevents building anything better, # like `-m68040'. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' ;; esac ;; beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries m4_if([$1], [GCJ], [], [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' ;; hpux*) # PIC is the default for 64-bit PA HP-UX, but not for 32-bit # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag # sets the default TLS model and affects inlining. case $host_cpu in hppa*64*) # +Z the default ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac ;; interix[[3-9]]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. # Instead, we relocate shared libraries at runtime. ;; msdosdjgpp*) # Just because we use GCC doesn't mean we suddenly get shared libraries # on systems that don't support them. _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no enable_shared=no ;; *nto* | *qnx*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ;; sysv4*MP*) if test -d /usr/nec; then _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic fi ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac else # PORTME Check for flag to pass linker flags through the system compiler. case $host_os in aix*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' else _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' fi ;; mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). m4_if([$1], [GCJ], [], [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ;; hpux9* | hpux10* | hpux11*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' ;; esac # Is there a better lt_prog_compiler_static that works with the bundled CC? _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' ;; irix5* | irix6* | nonstopux*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # PIC (with -KPIC) is the default. _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; linux* | k*bsd*-gnu | kopensolaris*-gnu) case $cc_basename in # old Intel for x86_64 which still supported -KPIC. ecc*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; # icc used to be incompatible with GCC. # ICC 10 doesn't accept -KPIC any more. icc* | ifort*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; # Lahey Fortran 8.1. lf95*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared' _LT_TAGVAR(lt_prog_compiler_static, $1)='--static' ;; pgcc* | pgf77* | pgf90* | pgf95*) # Portland Group compilers (*not* the Pentium gcc compiler, # which looks to be a dead project) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; ccc*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # All Alpha code is PIC. _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; xl*) # IBM XL C 8.0/Fortran 10.1 on PPC _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ;; *Sun\ F*) # Sun Fortran 8.3 passes all unrecognized flags to the linker _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_TAGVAR(lt_prog_compiler_wl, $1)='' ;; esac ;; esac ;; newsos6) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; *nto* | *qnx*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ;; osf3* | osf4* | osf5*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # All OSF/1 code is PIC. _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; rdos*) _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; solaris*) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' case $cc_basename in f77* | f90* | f95*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; *) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; esac ;; sunos4*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; sysv4 | sysv4.2uw2* | sysv4.3*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; sysv4*MP*) if test -d /usr/nec ;then _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' fi ;; sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; unicos*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ;; uts4*) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; *) _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ;; esac fi ]) case $host_os in # For platforms which do not support PIC, -DPIC is meaningless: *djgpp*) _LT_TAGVAR(lt_prog_compiler_pic, $1)= ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])" ;; esac AC_MSG_RESULT([$_LT_TAGVAR(lt_prog_compiler_pic, $1)]) _LT_TAGDECL([wl], [lt_prog_compiler_wl], [1], [How to pass a linker flag through the compiler]) # # Check to make sure the PIC flag actually works. # if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works], [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)], [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [], [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in "" | " "*) ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;; esac], [_LT_TAGVAR(lt_prog_compiler_pic, $1)= _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) fi _LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1], [Additional compiler flags for building library objects]) # # Check to make sure the static flag actually works. # wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\" _LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1), $lt_tmp_static_flag, [], [_LT_TAGVAR(lt_prog_compiler_static, $1)=]) _LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1], [Compiler flag to prevent dynamic linking]) ])# _LT_COMPILER_PIC # _LT_LINKER_SHLIBS([TAGNAME]) # ---------------------------- # See if the linker supports building shared libraries. m4_defun([_LT_LINKER_SHLIBS], [AC_REQUIRE([LT_PATH_LD])dnl AC_REQUIRE([LT_PATH_NM])dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_EGREP])dnl m4_require([_LT_DECL_SED])dnl m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl m4_require([_LT_TAG_COMPILER])dnl AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) m4_if([$1], [CXX], [ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' case $host_os in aix[[4-9]]*) # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' else _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' fi ;; pw32*) _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" ;; cygwin* | mingw* | cegcc*) _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' ;; linux* | k*bsd*-gnu) _LT_TAGVAR(link_all_deplibs, $1)=no ;; *) _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ;; esac _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] ], [ runpath_var= _LT_TAGVAR(allow_undefined_flag, $1)= _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(archive_cmds, $1)= _LT_TAGVAR(archive_expsym_cmds, $1)= _LT_TAGVAR(compiler_needs_object, $1)=no _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no _LT_TAGVAR(export_dynamic_flag_spec, $1)= _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' _LT_TAGVAR(hardcode_automatic, $1)=no _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= _LT_TAGVAR(hardcode_libdir_separator, $1)= _LT_TAGVAR(hardcode_minus_L, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported _LT_TAGVAR(inherit_rpath, $1)=no _LT_TAGVAR(link_all_deplibs, $1)=unknown _LT_TAGVAR(module_cmds, $1)= _LT_TAGVAR(module_expsym_cmds, $1)= _LT_TAGVAR(old_archive_from_new_cmds, $1)= _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)= _LT_TAGVAR(thread_safe_flag_spec, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= # include_expsyms should be a list of space-separated symbols to be *always* # included in the symbol list _LT_TAGVAR(include_expsyms, $1)= # exclude_expsyms can be an extended regexp of symbols to exclude # it will be wrapped by ` (' and `)$', so one must not match beginning or # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', # as well as any symbol that contains `d'. _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out # platforms (ab)use it in PIC code, but their linkers get confused if # the symbol is explicitly referenced. Since portable code cannot # rely on this symbol name, it's probably fine to never include it in # preloaded symbol tables. # Exclude shared library initialization/finalization symbols. dnl Note also adjust exclude_expsyms for C++ above. extract_expsyms_cmds= case $host_os in cygwin* | mingw* | pw32* | cegcc*) # FIXME: the MSVC++ port hasn't been tested in a loooong time # When not using gcc, we currently assume that we are using # Microsoft Visual C++. if test "$GCC" != yes; then with_gnu_ld=no fi ;; interix*) # we just hope/assume this is gcc and not c89 (= MSVC++) with_gnu_ld=yes ;; openbsd*) with_gnu_ld=no ;; linux* | k*bsd*-gnu) _LT_TAGVAR(link_all_deplibs, $1)=no ;; esac _LT_TAGVAR(ld_shlibs, $1)=yes if test "$with_gnu_ld" = yes; then # If archive_cmds runs LD, not CC, wlarc should be empty wlarc='${wl}' # Set some defaults for GNU ld with shared library support. These # are reset later if shared libraries are not supported. Putting them # here allows them to be overridden if necessary. runpath_var=LD_RUN_PATH _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' # ancient GNU ld didn't support --whole-archive et. al. if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else _LT_TAGVAR(whole_archive_flag_spec, $1)= fi supports_anon_versioning=no case `$LD -v 2>&1` in *GNU\ gold*) supports_anon_versioning=yes ;; *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... *\ 2.11.*) ;; # other 2.11 versions *) supports_anon_versioning=yes ;; esac # See if GNU ld supports shared libraries. case $host_os in aix[[3-9]]*) # On AIX/PPC, the GNU linker is very broken if test "$host_cpu" != ia64; then _LT_TAGVAR(ld_shlibs, $1)=no cat <<_LT_EOF 1>&2 *** Warning: the GNU linker, at least up to release 2.9.1, is reported *** to be unable to reliably create shared libraries on AIX. *** Therefore, libtool is disabling shared libraries support. If you *** really care for shared libraries, you may want to modify your PATH *** so that a non-GNU linker is found, and then restart. _LT_EOF fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='' ;; m68k) _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_minus_L, $1)=yes ;; esac ;; beos*) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then _LT_TAGVAR(allow_undefined_flag, $1)=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; cygwin* | mingw* | pw32* | cegcc*) # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, # as there is no search path for DLLs. _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then cp $export_symbols $output_objdir/$soname.def; else echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; interix[[3-9]]*) _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) tmp_diet=no if test "$host_os" = linux-dietlibc; then case $cc_basename in diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) esac fi if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ && test "$tmp_diet" = no then tmp_addflag= tmp_sharedflag='-shared' case $cc_basename,$host_cpu in pgcc*) # Portland Group C compiler _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag' ;; pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag -Mnomain' ;; ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 tmp_addflag=' -i_dynamic' ;; efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 tmp_addflag=' -i_dynamic -nofor_main' ;; ifc* | ifort*) # Intel Fortran compiler tmp_addflag=' -nofor_main' ;; lf95*) # Lahey Fortran 8.1 _LT_TAGVAR(whole_archive_flag_spec, $1)= tmp_sharedflag='--shared' ;; xl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below) tmp_sharedflag='-qmkshrobj' tmp_addflag= ;; esac case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' _LT_TAGVAR(compiler_needs_object, $1)=yes tmp_sharedflag='-G' ;; *Sun\ F*) # Sun Fortran 8.3 tmp_sharedflag='-G' ;; esac _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' if test "x$supports_anon_versioning" = xyes; then _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' fi case $cc_basename in xlf*) # IBM XL Fortran 10.1 on PPC cannot create shared libs itself _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir' _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib' if test "x$supports_anon_versioning" = xyes; then _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' fi ;; esac else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' fi ;; solaris*) if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then _LT_TAGVAR(ld_shlibs, $1)=no cat <<_LT_EOF 1>&2 *** Warning: The releases 2.8.* of the GNU linker cannot reliably *** create shared libraries on Solaris systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.9.1 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. _LT_EOF elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) case `$LD -v 2>&1` in *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) _LT_TAGVAR(ld_shlibs, $1)=no cat <<_LT_EOF 1>&2 *** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not *** reliably create shared libraries on SCO systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.16.91.0.3 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. _LT_EOF ;; *) # For security reasons, it is highly recommended that you always # use absolute paths for naming shared libraries, and exclude the # DT_RUNPATH tag from executables and libraries. But doing so # requires that you compile everything twice, which is a pain. if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; sunos4*) _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' wlarc= _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then runpath_var= _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(export_dynamic_flag_spec, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= fi else # PORTME fill in a description of your system's linker (not GNU ld) case $host_os in aix3*) _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(always_export_symbols, $1)=yes _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' # Note: this linker hardcodes the directories in LIBPATH if there # are no directories specified by -L. _LT_TAGVAR(hardcode_minus_L, $1)=yes if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then # Neither direct hardcoding nor static linking is supported with a # broken collect2. _LT_TAGVAR(hardcode_direct, $1)=unsupported fi ;; aix[[4-9]]*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag="" else # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' else _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' fi aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # need to do runtime linking. case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) for ld_flag in $LDFLAGS; do if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then aix_use_runtimelinking=yes break fi done ;; esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. _LT_TAGVAR(archive_cmds, $1)='' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_TAGVAR(link_all_deplibs, $1)=yes _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' if test "$GCC" = yes; then case $host_os in aix4.[[012]]|aix4.[[012]].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && strings "$collect2name" | $GREP resolve_lib_name >/dev/null then # We have reworked collect2 : else # We have old collect2 _LT_TAGVAR(hardcode_direct, $1)=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)= fi ;; esac shared_flag='-shared' if test "$aix_use_runtimelinking" = yes; then shared_flag="$shared_flag "'${wl}-G' fi _LT_TAGVAR(link_all_deplibs, $1)=no else # not using gcc if test "$host_cpu" = ia64; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' fi fi fi _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to export. _LT_TAGVAR(always_export_symbols, $1)=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. _LT_TAGVAR(allow_undefined_flag, $1)='-berok' # Determine the default libpath from the value encoded in an # empty executable. _LT_SYS_MODULE_PATH_AIX _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an # empty executable. _LT_SYS_MODULE_PATH_AIX _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' # Exported symbols can be pulled into shared objects from archives _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' _LT_TAGVAR(archive_cmds_need_lc, $1)=yes # This is similar to how AIX traditionally builds its shared libraries. _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='' ;; m68k) _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_minus_L, $1)=yes ;; esac ;; bsdi[[45]]*) _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic ;; cygwin* | mingw* | pw32* | cegcc*) # When not using gcc, we currently assume that we are using # Microsoft Visual C++. # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames=' # The linker will automatically build a .lib file if we build a DLL. _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' # FIXME: Should let the user specify the lib program. _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' _LT_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`' _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes ;; darwin* | rhapsody*) _LT_DARWIN_LINKER_FEATURES($1) ;; dgux*) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; freebsd1*) _LT_TAGVAR(ld_shlibs, $1)=no ;; # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor # support. Future versions do this automatically, but an explicit c++rt0.o # does not break anything, and helps significantly (at the cost of a little # extra space). freebsd2.2*) _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; # Unfortunately, older versions of FreeBSD 2 do not have this feature. freebsd2*) _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; # FreeBSD 3 and greater uses gcc -shared to do shared libraries. freebsd* | dragonfly*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; hpux9*) if test "$GCC" = yes; then _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' fi _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(hardcode_direct, $1)=yes # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ;; hpux10*) if test "$GCC" = yes -a "$with_gnu_ld" = no; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi if test "$with_gnu_ld" = no; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. _LT_TAGVAR(hardcode_minus_L, $1)=yes fi ;; hpux11*) if test "$GCC" = yes -a "$with_gnu_ld" = no; then case $host_cpu in hppa*64*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac else case $host_cpu in hppa*64*) _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac fi if test "$with_gnu_ld" = no; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: case $host_cpu in hppa*64*|ia64*) _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. _LT_TAGVAR(hardcode_minus_L, $1)=yes ;; esac fi ;; irix5* | irix6* | nonstopux*) if test "$GCC" = yes; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' # Try to use the -exported_symbol ld option, if it does not # work, assume that -exports_file does not work either and # implicitly export all symbols. save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" AC_LINK_IFELSE(int foo(void) {}, _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' ) LDFLAGS="$save_LDFLAGS" else _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' fi _LT_TAGVAR(archive_cmds_need_lc, $1)='no' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(inherit_rpath, $1)=yes _LT_TAGVAR(link_all_deplibs, $1)=yes ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out else _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF fi _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; newsos6) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *nto* | *qnx*) ;; openbsd*) if test -f /usr/libexec/ld.so; then _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=yes if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' else case $host_os in openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ;; esac fi else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; os2*) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ;; osf3*) if test "$GCC" = yes; then _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' fi _LT_TAGVAR(archive_cmds_need_lc, $1)='no' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: ;; osf4* | osf5*) # as osf3* with the addition of -msym flag if test "$GCC" = yes; then _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' else _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' # Both c and cxx compiler support -rpath directly _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' fi _LT_TAGVAR(archive_cmds_need_lc, $1)='no' _LT_TAGVAR(hardcode_libdir_separator, $1)=: ;; solaris*) _LT_TAGVAR(no_undefined_flag, $1)=' -z defs' if test "$GCC" = yes; then wlarc='${wl}' _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' else case `$CC -V 2>&1` in *"Compilers 5.0"*) wlarc='' _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' ;; *) wlarc='${wl}' _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' ;; esac fi _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no case $host_os in solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; *) # The compiler driver will combine and reorder linker options, # but understands `-z linker_flag'. GCC discards it without `$wl', # but is careful enough not to reorder. # Supported since Solaris 2.6 (maybe 2.5.1?) if test "$GCC" = yes; then _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' else _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' fi ;; esac _LT_TAGVAR(link_all_deplibs, $1)=yes ;; sunos4*) if test "x$host_vendor" = xsequent; then # Use $CC to link under sequent, because it throws in some extra .o # files that make .init and .fini sections work. _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' else _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' fi _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; sysv4) case $host_vendor in sni) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true??? ;; siemens) ## LD is ld it makes a PLAMLIB ## CC just makes a GrossModule. _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' _LT_TAGVAR(hardcode_direct, $1)=no ;; motorola) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie ;; esac runpath_var='LD_RUN_PATH' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; sysv4.3*) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' ;; sysv4*MP*) if test -d /usr/nec; then _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no runpath_var=LD_RUN_PATH hardcode_runpath_var=yes _LT_TAGVAR(ld_shlibs, $1)=yes fi ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; sysv5* | sco3.2v5* | sco5v6*) # Note: We can NOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_TAGVAR(link_all_deplibs, $1)=yes _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; uts4*) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) _LT_TAGVAR(ld_shlibs, $1)=no ;; esac if test x$host_vendor = xsni; then case $host in sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym' ;; esac fi fi ]) AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no _LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld _LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl _LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl _LT_DECL([], [extract_expsyms_cmds], [2], [The commands to extract the exported symbol list from a shared archive]) # # Do we need to explicitly link libc? # case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in x|xyes) # Assume -lc should be added _LT_TAGVAR(archive_cmds_need_lc, $1)=yes if test "$enable_shared" = yes && test "$GCC" = yes; then case $_LT_TAGVAR(archive_cmds, $1) in *'~'*) # FIXME: we may have to deal with multi-command sequences. ;; '$CC '*) # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. AC_MSG_CHECKING([whether -lc should be explicitly linked in]) $RM conftest* echo "$lt_simple_compile_test_code" > conftest.$ac_ext if AC_TRY_EVAL(ac_compile) 2>conftest.err; then soname=conftest lib=conftest libobjs=conftest.$ac_objext deplibs= wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1) compiler_flags=-v linker_flags=-v verstring= output_objdir=. libname=conftest lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1) _LT_TAGVAR(allow_undefined_flag, $1)= if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) then _LT_TAGVAR(archive_cmds_need_lc, $1)=no else _LT_TAGVAR(archive_cmds_need_lc, $1)=yes fi _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag else cat conftest.err 1>&5 fi $RM conftest* AC_MSG_RESULT([$_LT_TAGVAR(archive_cmds_need_lc, $1)]) ;; esac fi ;; esac _LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0], [Whether or not to add -lc for building shared libraries]) _LT_TAGDECL([allow_libtool_libs_with_static_runtimes], [enable_shared_with_static_runtimes], [0], [Whether or not to disallow shared libs when runtime libs are static]) _LT_TAGDECL([], [export_dynamic_flag_spec], [1], [Compiler flag to allow reflexive dlopens]) _LT_TAGDECL([], [whole_archive_flag_spec], [1], [Compiler flag to generate shared objects directly from archives]) _LT_TAGDECL([], [compiler_needs_object], [1], [Whether the compiler copes with passing no objects directly]) _LT_TAGDECL([], [old_archive_from_new_cmds], [2], [Create an old-style archive from a shared archive]) _LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2], [Create a temporary old-style archive to link instead of a shared archive]) _LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive]) _LT_TAGDECL([], [archive_expsym_cmds], [2]) _LT_TAGDECL([], [module_cmds], [2], [Commands used to build a loadable module if different from building a shared archive.]) _LT_TAGDECL([], [module_expsym_cmds], [2]) _LT_TAGDECL([], [with_gnu_ld], [1], [Whether we are building with GNU ld or not]) _LT_TAGDECL([], [allow_undefined_flag], [1], [Flag that allows shared libraries with undefined symbols to be built]) _LT_TAGDECL([], [no_undefined_flag], [1], [Flag that enforces no undefined symbols]) _LT_TAGDECL([], [hardcode_libdir_flag_spec], [1], [Flag to hardcode $libdir into a binary during linking. This must work even if $libdir does not exist]) _LT_TAGDECL([], [hardcode_libdir_flag_spec_ld], [1], [[If ld is used when linking, flag to hardcode $libdir into a binary during linking. This must work even if $libdir does not exist]]) _LT_TAGDECL([], [hardcode_libdir_separator], [1], [Whether we need a single "-rpath" flag with a separated argument]) _LT_TAGDECL([], [hardcode_direct], [0], [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the resulting binary]) _LT_TAGDECL([], [hardcode_direct_absolute], [0], [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the resulting binary and the resulting library dependency is "absolute", i.e impossible to change by setting ${shlibpath_var} if the library is relocated]) _LT_TAGDECL([], [hardcode_minus_L], [0], [Set to "yes" if using the -LDIR flag during linking hardcodes DIR into the resulting binary]) _LT_TAGDECL([], [hardcode_shlibpath_var], [0], [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into the resulting binary]) _LT_TAGDECL([], [hardcode_automatic], [0], [Set to "yes" if building a shared library automatically hardcodes DIR into the library and all subsequent libraries and executables linked against it]) _LT_TAGDECL([], [inherit_rpath], [0], [Set to yes if linker adds runtime paths of dependent libraries to runtime path list]) _LT_TAGDECL([], [link_all_deplibs], [0], [Whether libtool must link a program against all its dependency libraries]) _LT_TAGDECL([], [fix_srcfile_path], [1], [Fix the shell variable $srcfile for the compiler]) _LT_TAGDECL([], [always_export_symbols], [0], [Set to "yes" if exported symbols are required]) _LT_TAGDECL([], [export_symbols_cmds], [2], [The commands to list exported symbols]) _LT_TAGDECL([], [exclude_expsyms], [1], [Symbols that should not be listed in the preloaded symbols]) _LT_TAGDECL([], [include_expsyms], [1], [Symbols that must always be exported]) _LT_TAGDECL([], [prelink_cmds], [2], [Commands necessary for linking programs (against libraries) with templates]) _LT_TAGDECL([], [file_list_spec], [1], [Specify filename containing input files]) dnl FIXME: Not yet implemented dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1], dnl [Compiler flag to generate thread safe objects]) ])# _LT_LINKER_SHLIBS # _LT_LANG_C_CONFIG([TAG]) # ------------------------ # Ensure that the configuration variables for a C compiler are suitably # defined. These variables are subsequently used by _LT_CONFIG to write # the compiler configuration to `libtool'. m4_defun([_LT_LANG_C_CONFIG], [m4_require([_LT_DECL_EGREP])dnl lt_save_CC="$CC" AC_LANG_PUSH(C) # Source file extension for C test sources. ac_ext=c # Object file extension for compiled C test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;" # Code to be used in simple link tests lt_simple_link_test_code='int main(){return(0);}' _LT_TAG_COMPILER # Save the default compiler, since it gets overwritten when the other # tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. compiler_DEFAULT=$CC # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... if test -n "$compiler"; then _LT_COMPILER_NO_RTTI($1) _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_SYS_DYNAMIC_LINKER($1) _LT_LINKER_HARDCODE_LIBPATH($1) LT_SYS_DLOPEN_SELF _LT_CMD_STRIPLIB # Report which library types will actually be built AC_MSG_CHECKING([if libtool supports shared libraries]) AC_MSG_RESULT([$can_build_shared]) AC_MSG_CHECKING([whether to build shared libraries]) test "$can_build_shared" = "no" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix[[4-9]]*) if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then test "$enable_shared" = yes && enable_static=no fi ;; esac AC_MSG_RESULT([$enable_shared]) AC_MSG_CHECKING([whether to build static libraries]) # Make sure either enable_shared or enable_static is yes. test "$enable_shared" = yes || enable_static=yes AC_MSG_RESULT([$enable_static]) _LT_CONFIG($1) fi AC_LANG_POP CC="$lt_save_CC" ])# _LT_LANG_C_CONFIG # _LT_PROG_CXX # ------------ # Since AC_PROG_CXX is broken, in that it returns g++ if there is no c++ # compiler, we have our own version here. m4_defun([_LT_PROG_CXX], [ pushdef([AC_MSG_ERROR], [_lt_caught_CXX_error=yes]) AC_PROG_CXX if test -n "$CXX" && ( test "X$CXX" != "Xno" && ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || (test "X$CXX" != "Xg++"))) ; then AC_PROG_CXXCPP else _lt_caught_CXX_error=yes fi popdef([AC_MSG_ERROR]) ])# _LT_PROG_CXX dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([_LT_PROG_CXX], []) # _LT_LANG_CXX_CONFIG([TAG]) # -------------------------- # Ensure that the configuration variables for a C++ compiler are suitably # defined. These variables are subsequently used by _LT_CONFIG to write # the compiler configuration to `libtool'. m4_defun([_LT_LANG_CXX_CONFIG], [AC_REQUIRE([_LT_PROG_CXX])dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_EGREP])dnl AC_LANG_PUSH(C++) _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(allow_undefined_flag, $1)= _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(archive_expsym_cmds, $1)= _LT_TAGVAR(compiler_needs_object, $1)=no _LT_TAGVAR(export_dynamic_flag_spec, $1)= _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= _LT_TAGVAR(hardcode_libdir_separator, $1)= _LT_TAGVAR(hardcode_minus_L, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported _LT_TAGVAR(hardcode_automatic, $1)=no _LT_TAGVAR(inherit_rpath, $1)=no _LT_TAGVAR(module_cmds, $1)= _LT_TAGVAR(module_expsym_cmds, $1)= _LT_TAGVAR(link_all_deplibs, $1)=unknown _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds _LT_TAGVAR(no_undefined_flag, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no # Source file extension for C++ test sources. ac_ext=cpp # Object file extension for compiled C++ test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # No sense in running all these tests if we already determined that # the CXX compiler isn't working. Some variables (like enable_shared) # are currently assumed to apply to all compilers on this platform, # and will be corrupted by setting them based on a non-working compiler. if test "$_lt_caught_CXX_error" != yes; then # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;" # Code to be used in simple link tests lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }' # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC=$CC lt_save_LD=$LD lt_save_GCC=$GCC GCC=$GXX lt_save_with_gnu_ld=$with_gnu_ld lt_save_path_LD=$lt_cv_path_LD if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx else $as_unset lt_cv_prog_gnu_ld fi if test -n "${lt_cv_path_LDCXX+set}"; then lt_cv_path_LD=$lt_cv_path_LDCXX else $as_unset lt_cv_path_LD fi test -z "${LDCXX+set}" || LD=$LDCXX CC=${CXX-"c++"} compiler=$CC _LT_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) if test -n "$compiler"; then # We don't want -fno-exception when compiling C++ code, so set the # no_builtin_flag separately if test "$GXX" = yes; then _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' else _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= fi if test "$GXX" = yes; then # Set up default GNU C++ configuration LT_PATH_LD # Check if GNU C++ uses GNU ld as the underlying linker, since the # archiving commands below assume that GNU ld is being used. if test "$with_gnu_ld" = yes; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' # If archive_cmds runs LD, not CC, wlarc should be empty # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to # investigate it a little bit more. (MM) wlarc='${wl}' # ancient GNU ld didn't support --whole-archive et. al. if eval "`$CC -print-prog-name=ld` --help 2>&1" | $GREP 'no-whole-archive' > /dev/null; then _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else _LT_TAGVAR(whole_archive_flag_spec, $1)= fi else with_gnu_ld=no wlarc= # A generic and very simple default shared library creation # command for GNU C++ for the case where it uses the native # linker, instead of GNU ld. If possible, this setting should # overridden to take advantage of the native linker features on # the platform it is being used on. _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' fi # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' else GXX=no with_gnu_ld=no wlarc= fi # PORTME: fill in a description of your system's C++ link characteristics AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) _LT_TAGVAR(ld_shlibs, $1)=yes case $host_os in aix3*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; aix[[4-9]]*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag="" else aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # need to do runtime linking. case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) for ld_flag in $LDFLAGS; do case $ld_flag in *-brtl*) aix_use_runtimelinking=yes break ;; esac done ;; esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. _LT_TAGVAR(archive_cmds, $1)='' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_TAGVAR(link_all_deplibs, $1)=yes _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' if test "$GXX" = yes; then case $host_os in aix4.[[012]]|aix4.[[012]].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && strings "$collect2name" | $GREP resolve_lib_name >/dev/null then # We have reworked collect2 : else # We have old collect2 _LT_TAGVAR(hardcode_direct, $1)=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)= fi esac shared_flag='-shared' if test "$aix_use_runtimelinking" = yes; then shared_flag="$shared_flag "'${wl}-G' fi else # not using gcc if test "$host_cpu" = ia64; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' fi fi fi _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to # export. _LT_TAGVAR(always_export_symbols, $1)=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. _LT_TAGVAR(allow_undefined_flag, $1)='-berok' # Determine the default libpath from the value encoded in an empty # executable. _LT_SYS_MODULE_PATH_AIX _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an # empty executable. _LT_SYS_MODULE_PATH_AIX _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' # Exported symbols can be pulled into shared objects from archives _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' _LT_TAGVAR(archive_cmds_need_lc, $1)=yes # This is similar to how AIX traditionally builds its shared # libraries. _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; beos*) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then _LT_TAGVAR(allow_undefined_flag, $1)=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; chorus*) case $cc_basename in *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac ;; cygwin* | mingw* | pw32* | cegcc*) # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, # as there is no search path for DLLs. _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then cp $export_symbols $output_objdir/$soname.def; else echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; darwin* | rhapsody*) _LT_DARWIN_LINKER_FEATURES($1) ;; dgux*) case $cc_basename in ec++*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; ghcx*) # Green Hills C++ Compiler # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac ;; freebsd[[12]]*) # C++ shared libraries reported to be fairly broken before # switch to ELF _LT_TAGVAR(ld_shlibs, $1)=no ;; freebsd-elf*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;; freebsd* | dragonfly*) # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF # conventions _LT_TAGVAR(ld_shlibs, $1)=yes ;; gnu*) ;; hpux9*) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, # but as the default # location of the library. case $cc_basename in CC*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; aCC*) _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ;; *) if test "$GXX" = yes; then _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; hpux10*|hpux11*) if test $with_gnu_ld = no; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: case $host_cpu in hppa*64*|ia64*) ;; *) _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ;; esac fi case $host_cpu in hppa*64*|ia64*) _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, # but as the default # location of the library. ;; esac case $cc_basename in CC*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; aCC*) case $host_cpu in hppa*64*) _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; ia64*) _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ;; *) if test "$GXX" = yes; then if test $with_gnu_ld = no; then case $host_cpu in hppa*64*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; ia64*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac fi else # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; interix[[3-9]]*) _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; irix5* | irix6*) case $cc_basename in CC*) # SGI C++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' # Archives containing C++ object files must be created using # "CC -ar", where "CC" is the IRIX C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' ;; *) if test "$GXX" = yes; then if test "$with_gnu_ld" = no; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib' fi fi _LT_TAGVAR(link_all_deplibs, $1)=yes ;; esac _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(inherit_rpath, $1)=yes ;; linux* | k*bsd*-gnu | kopensolaris*-gnu) case $cc_basename in KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' # Archives containing C++ object files must be created using # "CC -Bstatic", where "CC" is the KAI C++ compiler. _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; icpc* | ecpc* ) # Intel C++ with_gnu_ld=yes # version 8.0 and above of icpc choke on multiply defined symbols # if we add $predep_objects and $postdep_objects, however 7.1 and # earlier do not add the objects themselves. case `$CC -V 2>&1` in *"Version 7."*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ;; *) # Version 8.0 or newer tmp_idyn= case $host_cpu in ia64*) tmp_idyn=' -i_dynamic';; esac _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ;; esac _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' ;; pgCC* | pgcpp*) # Portland Group C++ compiler case `$CC -V` in *pgCC\ [[1-5]]* | *pgcpp\ [[1-5]]*) _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"' _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~ $RANLIB $oldlib' _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' ;; *) # Version 6 will use weak symbols _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' ;; esac _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' ;; cxx*) # Compaq C++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' runpath_var=LD_RUN_PATH _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ;; xl*) # IBM XL 8.0 on PPC, with GNU ld _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' if test "x$supports_anon_versioning" = xyes; then _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' fi ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' _LT_TAGVAR(compiler_needs_object, $1)=yes # Not sure whether something based on # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 # would be better. output_verbose_link_cmd='echo' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' ;; esac ;; esac ;; lynxos*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; m88k*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; mvs*) case $cc_basename in cxx*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac ;; netbsd*) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' wlarc= _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no fi # Workaround some broken pre-1.5 toolchains output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' ;; *nto* | *qnx*) _LT_TAGVAR(ld_shlibs, $1)=yes ;; openbsd2*) # C++ shared libraries are fairly broken _LT_TAGVAR(ld_shlibs, $1)=no ;; openbsd*) if test -f /usr/libexec/ld.so; then _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' fi output_verbose_link_cmd=echo else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; osf3* | osf4* | osf5*) case $cc_basename in KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: # Archives containing C++ object files must be created using # the KAI C++ compiler. case $host in osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;; esac ;; RCC*) # Rational C++ 2.4.1 # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; cxx*) case $host in osf3*) _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ;; *) _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ echo "-hidden">> $lib.exp~ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~ $RM $lib.exp' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' ;; esac _LT_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ;; *) if test "$GXX" = yes && test "$with_gnu_ld" = no; then _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' case $host in osf3*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ;; esac _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' else # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; psos*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; sunos4*) case $cc_basename in CC*) # Sun C++ 4.x # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; lcc*) # Lucid # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac ;; solaris*) case $cc_basename in CC*) # Sun C++ 4.2, 5.x and Centerline C++ _LT_TAGVAR(archive_cmds_need_lc,$1)=yes _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no case $host_os in solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; *) # The compiler driver will combine and reorder linker options, # but understands `-z linker_flag'. # Supported since Solaris 2.6 (maybe 2.5.1?) _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;; esac _LT_TAGVAR(link_all_deplibs, $1)=yes output_verbose_link_cmd='echo' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' ;; gcx*) # Green Hills C++ Compiler _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' # The C++ compiler must be used to create the archive. _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' ;; *) # GNU C++ compiler with Solaris linker if test "$GXX" = yes && test "$with_gnu_ld" = no; then _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' if $CC --version | $GREP -v '^2\.7' > /dev/null; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' else # g++ 2.7 appears to require `-G' NOT `-shared' on this # platform. _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' fi _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' case $host_os in solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; *) _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' ;; esac fi ;; esac ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no runpath_var='LD_RUN_PATH' case $cc_basename in CC*) _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; esac ;; sysv5* | sco3.2v5* | sco5v6*) # Note: We can NOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_TAGVAR(link_all_deplibs, $1)=yes _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' runpath_var='LD_RUN_PATH' case $cc_basename in CC*) _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; esac ;; tandem*) case $cc_basename in NCC*) # NonStop-UX NCC 3.20 # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac ;; vxworks*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no _LT_TAGVAR(GCC, $1)="$GXX" _LT_TAGVAR(LD, $1)="$LD" ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... _LT_SYS_HIDDEN_LIBDEPS($1) _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_SYS_DYNAMIC_LINKER($1) _LT_LINKER_HARDCODE_LIBPATH($1) _LT_CONFIG($1) fi # test -n "$compiler" CC=$lt_save_CC LDCXX=$LD LD=$lt_save_LD GCC=$lt_save_GCC with_gnu_ld=$lt_save_with_gnu_ld lt_cv_path_LDCXX=$lt_cv_path_LD lt_cv_path_LD=$lt_save_path_LD lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld fi # test "$_lt_caught_CXX_error" != yes AC_LANG_POP ])# _LT_LANG_CXX_CONFIG # _LT_SYS_HIDDEN_LIBDEPS([TAGNAME]) # --------------------------------- # Figure out "hidden" library dependencies from verbose # compiler output when linking a shared library. # Parse the compiler output and extract the necessary # objects, libraries and library flags. m4_defun([_LT_SYS_HIDDEN_LIBDEPS], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl # Dependencies to place before and after the object being linked: _LT_TAGVAR(predep_objects, $1)= _LT_TAGVAR(postdep_objects, $1)= _LT_TAGVAR(predeps, $1)= _LT_TAGVAR(postdeps, $1)= _LT_TAGVAR(compiler_lib_search_path, $1)= dnl we can't use the lt_simple_compile_test_code here, dnl because it contains code intended for an executable, dnl not a library. It's possible we should let each dnl tag define a new lt_????_link_test_code variable, dnl but it's only used here... m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF int a; void foo (void) { a = 0; } _LT_EOF ], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF class Foo { public: Foo (void) { a = 0; } private: int a; }; _LT_EOF ], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF subroutine foo implicit none integer*4 a a=0 return end _LT_EOF ], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF subroutine foo implicit none integer a a=0 return end _LT_EOF ], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF public class foo { private int a; public void bar (void) { a = 0; } }; _LT_EOF ]) dnl Parse the compiler output and extract the necessary dnl objects, libraries and library flags. if AC_TRY_EVAL(ac_compile); then # Parse the compiler output and extract the necessary # objects, libraries and library flags. # Sentinel used to keep track of whether or not we are before # the conftest object file. pre_test_object_deps_done=no for p in `eval "$output_verbose_link_cmd"`; do case $p in -L* | -R* | -l*) # Some compilers place space between "-{L,R}" and the path. # Remove the space. if test $p = "-L" || test $p = "-R"; then prev=$p continue else prev= fi if test "$pre_test_object_deps_done" = no; then case $p in -L* | -R*) # Internal compiler library paths should come after those # provided the user. The postdeps already come after the # user supplied libs so there is no need to process them. if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}" else _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}" fi ;; # The "-l" case would never come before the object being # linked, so don't bother handling this case. esac else if test -z "$_LT_TAGVAR(postdeps, $1)"; then _LT_TAGVAR(postdeps, $1)="${prev}${p}" else _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}" fi fi ;; *.$objext) # This assumes that the test object file only shows up # once in the compiler output. if test "$p" = "conftest.$objext"; then pre_test_object_deps_done=yes continue fi if test "$pre_test_object_deps_done" = no; then if test -z "$_LT_TAGVAR(predep_objects, $1)"; then _LT_TAGVAR(predep_objects, $1)="$p" else _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p" fi else if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then _LT_TAGVAR(postdep_objects, $1)="$p" else _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p" fi fi ;; *) ;; # Ignore the rest. esac done # Clean up. rm -f a.out a.exe else echo "libtool.m4: error: problem compiling $1 test program" fi $RM -f confest.$objext # PORTME: override above test on systems where it is broken m4_if([$1], [CXX], [case $host_os in interix[[3-9]]*) # Interix 3.5 installs completely hosed .la files for C++, so rather than # hack all around it, let's just trust "g++" to DTRT. _LT_TAGVAR(predep_objects,$1)= _LT_TAGVAR(postdep_objects,$1)= _LT_TAGVAR(postdeps,$1)= ;; linux*) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 # The more standards-conforming stlport4 library is # incompatible with the Cstd library. Avoid specifying # it if it's in CXXFLAGS. Ignore libCrun as # -library=stlport4 depends on it. case " $CXX $CXXFLAGS " in *" -library=stlport4 "*) solaris_use_stlport4=yes ;; esac if test "$solaris_use_stlport4" != yes; then _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' fi ;; esac ;; solaris*) case $cc_basename in CC*) # The more standards-conforming stlport4 library is # incompatible with the Cstd library. Avoid specifying # it if it's in CXXFLAGS. Ignore libCrun as # -library=stlport4 depends on it. case " $CXX $CXXFLAGS " in *" -library=stlport4 "*) solaris_use_stlport4=yes ;; esac # Adding this requires a known-good setup of shared libraries for # Sun compiler versions before 5.6, else PIC objects from an old # archive will be linked into the output, leading to subtle bugs. if test "$solaris_use_stlport4" != yes; then _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' fi ;; esac ;; esac ]) case " $_LT_TAGVAR(postdeps, $1) " in *" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;; esac _LT_TAGVAR(compiler_lib_search_dirs, $1)= if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` fi _LT_TAGDECL([], [compiler_lib_search_dirs], [1], [The directories searched by this compiler when creating a shared library]) _LT_TAGDECL([], [predep_objects], [1], [Dependencies to place before and after the objects being linked to create a shared library]) _LT_TAGDECL([], [postdep_objects], [1]) _LT_TAGDECL([], [predeps], [1]) _LT_TAGDECL([], [postdeps], [1]) _LT_TAGDECL([], [compiler_lib_search_path], [1], [The library search path used internally by the compiler when linking a shared library]) ])# _LT_SYS_HIDDEN_LIBDEPS # _LT_PROG_F77 # ------------ # Since AC_PROG_F77 is broken, in that it returns the empty string # if there is no fortran compiler, we have our own version here. m4_defun([_LT_PROG_F77], [ pushdef([AC_MSG_ERROR], [_lt_disable_F77=yes]) AC_PROG_F77 if test -z "$F77" || test "X$F77" = "Xno"; then _lt_disable_F77=yes fi popdef([AC_MSG_ERROR]) ])# _LT_PROG_F77 dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([_LT_PROG_F77], []) # _LT_LANG_F77_CONFIG([TAG]) # -------------------------- # Ensure that the configuration variables for a Fortran 77 compiler are # suitably defined. These variables are subsequently used by _LT_CONFIG # to write the compiler configuration to `libtool'. m4_defun([_LT_LANG_F77_CONFIG], [AC_REQUIRE([_LT_PROG_F77])dnl AC_LANG_PUSH(Fortran 77) _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(allow_undefined_flag, $1)= _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(archive_expsym_cmds, $1)= _LT_TAGVAR(export_dynamic_flag_spec, $1)= _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= _LT_TAGVAR(hardcode_libdir_separator, $1)= _LT_TAGVAR(hardcode_minus_L, $1)=no _LT_TAGVAR(hardcode_automatic, $1)=no _LT_TAGVAR(inherit_rpath, $1)=no _LT_TAGVAR(module_cmds, $1)= _LT_TAGVAR(module_expsym_cmds, $1)= _LT_TAGVAR(link_all_deplibs, $1)=unknown _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds _LT_TAGVAR(no_undefined_flag, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no # Source file extension for f77 test sources. ac_ext=f # Object file extension for compiled f77 test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # No sense in running all these tests if we already determined that # the F77 compiler isn't working. Some variables (like enable_shared) # are currently assumed to apply to all compilers on this platform, # and will be corrupted by setting them based on a non-working compiler. if test "$_lt_disable_F77" != yes; then # Code to be used in simple compile tests lt_simple_compile_test_code="\ subroutine t return end " # Code to be used in simple link tests lt_simple_link_test_code="\ program t end " # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC="$CC" lt_save_GCC=$GCC CC=${F77-"f77"} compiler=$CC _LT_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) GCC=$G77 if test -n "$compiler"; then AC_MSG_CHECKING([if libtool supports shared libraries]) AC_MSG_RESULT([$can_build_shared]) AC_MSG_CHECKING([whether to build shared libraries]) test "$can_build_shared" = "no" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix[[4-9]]*) if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then test "$enable_shared" = yes && enable_static=no fi ;; esac AC_MSG_RESULT([$enable_shared]) AC_MSG_CHECKING([whether to build static libraries]) # Make sure either enable_shared or enable_static is yes. test "$enable_shared" = yes || enable_static=yes AC_MSG_RESULT([$enable_static]) _LT_TAGVAR(GCC, $1)="$G77" _LT_TAGVAR(LD, $1)="$LD" ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_SYS_DYNAMIC_LINKER($1) _LT_LINKER_HARDCODE_LIBPATH($1) _LT_CONFIG($1) fi # test -n "$compiler" GCC=$lt_save_GCC CC="$lt_save_CC" fi # test "$_lt_disable_F77" != yes AC_LANG_POP ])# _LT_LANG_F77_CONFIG # _LT_PROG_FC # ----------- # Since AC_PROG_FC is broken, in that it returns the empty string # if there is no fortran compiler, we have our own version here. m4_defun([_LT_PROG_FC], [ pushdef([AC_MSG_ERROR], [_lt_disable_FC=yes]) AC_PROG_FC if test -z "$FC" || test "X$FC" = "Xno"; then _lt_disable_FC=yes fi popdef([AC_MSG_ERROR]) ])# _LT_PROG_FC dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([_LT_PROG_FC], []) # _LT_LANG_FC_CONFIG([TAG]) # ------------------------- # Ensure that the configuration variables for a Fortran compiler are # suitably defined. These variables are subsequently used by _LT_CONFIG # to write the compiler configuration to `libtool'. m4_defun([_LT_LANG_FC_CONFIG], [AC_REQUIRE([_LT_PROG_FC])dnl AC_LANG_PUSH(Fortran) _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(allow_undefined_flag, $1)= _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(archive_expsym_cmds, $1)= _LT_TAGVAR(export_dynamic_flag_spec, $1)= _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= _LT_TAGVAR(hardcode_libdir_separator, $1)= _LT_TAGVAR(hardcode_minus_L, $1)=no _LT_TAGVAR(hardcode_automatic, $1)=no _LT_TAGVAR(inherit_rpath, $1)=no _LT_TAGVAR(module_cmds, $1)= _LT_TAGVAR(module_expsym_cmds, $1)= _LT_TAGVAR(link_all_deplibs, $1)=unknown _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds _LT_TAGVAR(no_undefined_flag, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no # Source file extension for fc test sources. ac_ext=${ac_fc_srcext-f} # Object file extension for compiled fc test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # No sense in running all these tests if we already determined that # the FC compiler isn't working. Some variables (like enable_shared) # are currently assumed to apply to all compilers on this platform, # and will be corrupted by setting them based on a non-working compiler. if test "$_lt_disable_FC" != yes; then # Code to be used in simple compile tests lt_simple_compile_test_code="\ subroutine t return end " # Code to be used in simple link tests lt_simple_link_test_code="\ program t end " # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC="$CC" lt_save_GCC=$GCC CC=${FC-"f95"} compiler=$CC GCC=$ac_cv_fc_compiler_gnu _LT_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) if test -n "$compiler"; then AC_MSG_CHECKING([if libtool supports shared libraries]) AC_MSG_RESULT([$can_build_shared]) AC_MSG_CHECKING([whether to build shared libraries]) test "$can_build_shared" = "no" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix[[4-9]]*) if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then test "$enable_shared" = yes && enable_static=no fi ;; esac AC_MSG_RESULT([$enable_shared]) AC_MSG_CHECKING([whether to build static libraries]) # Make sure either enable_shared or enable_static is yes. test "$enable_shared" = yes || enable_static=yes AC_MSG_RESULT([$enable_static]) _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu" _LT_TAGVAR(LD, $1)="$LD" ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... _LT_SYS_HIDDEN_LIBDEPS($1) _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_SYS_DYNAMIC_LINKER($1) _LT_LINKER_HARDCODE_LIBPATH($1) _LT_CONFIG($1) fi # test -n "$compiler" GCC=$lt_save_GCC CC="$lt_save_CC" fi # test "$_lt_disable_FC" != yes AC_LANG_POP ])# _LT_LANG_FC_CONFIG # _LT_LANG_GCJ_CONFIG([TAG]) # -------------------------- # Ensure that the configuration variables for the GNU Java Compiler compiler # are suitably defined. These variables are subsequently used by _LT_CONFIG # to write the compiler configuration to `libtool'. m4_defun([_LT_LANG_GCJ_CONFIG], [AC_REQUIRE([LT_PROG_GCJ])dnl AC_LANG_SAVE # Source file extension for Java test sources. ac_ext=java # Object file extension for compiled Java test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="class foo {}" # Code to be used in simple link tests lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }' # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC="$CC" lt_save_GCC=$GCC GCC=yes CC=${GCJ-"gcj"} compiler=$CC _LT_TAGVAR(compiler, $1)=$CC _LT_TAGVAR(LD, $1)="$LD" _LT_CC_BASENAME([$compiler]) # GCJ did not exist at the time GCC didn't implicitly link libc in. _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... if test -n "$compiler"; then _LT_COMPILER_NO_RTTI($1) _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_LINKER_HARDCODE_LIBPATH($1) _LT_CONFIG($1) fi AC_LANG_RESTORE GCC=$lt_save_GCC CC="$lt_save_CC" ])# _LT_LANG_GCJ_CONFIG # _LT_LANG_RC_CONFIG([TAG]) # ------------------------- # Ensure that the configuration variables for the Windows resource compiler # are suitably defined. These variables are subsequently used by _LT_CONFIG # to write the compiler configuration to `libtool'. m4_defun([_LT_LANG_RC_CONFIG], [AC_REQUIRE([LT_PROG_RC])dnl AC_LANG_SAVE # Source file extension for RC test sources. ac_ext=rc # Object file extension for compiled RC test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # Code to be used in simple compile tests lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' # Code to be used in simple link tests lt_simple_link_test_code="$lt_simple_compile_test_code" # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC="$CC" lt_save_GCC=$GCC GCC= CC=${RC-"windres"} compiler=$CC _LT_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes if test -n "$compiler"; then : _LT_CONFIG($1) fi GCC=$lt_save_GCC AC_LANG_RESTORE CC="$lt_save_CC" ])# _LT_LANG_RC_CONFIG # LT_PROG_GCJ # ----------- AC_DEFUN([LT_PROG_GCJ], [m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ], [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ], [AC_CHECK_TOOL(GCJ, gcj,) test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" AC_SUBST(GCJFLAGS)])])[]dnl ]) # Old name: AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([LT_AC_PROG_GCJ], []) # LT_PROG_RC # ---------- AC_DEFUN([LT_PROG_RC], [AC_CHECK_TOOL(RC, windres,) ]) # Old name: AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([LT_AC_PROG_RC], []) # _LT_DECL_EGREP # -------------- # If we don't have a new enough Autoconf to choose the best grep # available, choose the one first in the user's PATH. m4_defun([_LT_DECL_EGREP], [AC_REQUIRE([AC_PROG_EGREP])dnl AC_REQUIRE([AC_PROG_FGREP])dnl test -z "$GREP" && GREP=grep _LT_DECL([], [GREP], [1], [A grep program that handles long lines]) _LT_DECL([], [EGREP], [1], [An ERE matcher]) _LT_DECL([], [FGREP], [1], [A literal string matcher]) dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too AC_SUBST([GREP]) ]) # _LT_DECL_OBJDUMP # -------------- # If we don't have a new enough Autoconf to choose the best objdump # available, choose the one first in the user's PATH. m4_defun([_LT_DECL_OBJDUMP], [AC_CHECK_TOOL(OBJDUMP, objdump, false) test -z "$OBJDUMP" && OBJDUMP=objdump _LT_DECL([], [OBJDUMP], [1], [An object symbol dumper]) AC_SUBST([OBJDUMP]) ]) # _LT_DECL_SED # ------------ # Check for a fully-functional sed program, that truncates # as few characters as possible. Prefer GNU sed if found. m4_defun([_LT_DECL_SED], [AC_PROG_SED test -z "$SED" && SED=sed Xsed="$SED -e 1s/^X//" _LT_DECL([], [SED], [1], [A sed program that does not truncate output]) _LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"], [Sed that helps us avoid accidentally triggering echo(1) options like -n]) ])# _LT_DECL_SED m4_ifndef([AC_PROG_SED], [ ############################################################ # NOTE: This macro has been submitted for inclusion into # # GNU Autoconf as AC_PROG_SED. When it is available in # # a released version of Autoconf we should remove this # # macro and use it instead. # ############################################################ m4_defun([AC_PROG_SED], [AC_MSG_CHECKING([for a sed that does not truncate output]) AC_CACHE_VAL(lt_cv_path_SED, [# Loop through the user's path and test for sed and gsed. # Then use that list of sed's as ones to test for truncation. as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for lt_ac_prog in sed gsed; do for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" fi done done done IFS=$as_save_IFS lt_ac_max=0 lt_ac_count=0 # Add /usr/xpg4/bin/sed as it is typically found on Solaris # along with /bin/sed that truncates output. for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do test ! -f $lt_ac_sed && continue cat /dev/null > conftest.in lt_ac_count=0 echo $ECHO_N "0123456789$ECHO_C" >conftest.in # Check for GNU sed and select it if it is found. if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then lt_cv_path_SED=$lt_ac_sed break fi while true; do cat conftest.in conftest.in >conftest.tmp mv conftest.tmp conftest.in cp conftest.in conftest.nl echo >>conftest.nl $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break cmp -s conftest.out conftest.nl || break # 10000 chars as input seems more than enough test $lt_ac_count -gt 10 && break lt_ac_count=`expr $lt_ac_count + 1` if test $lt_ac_count -gt $lt_ac_max; then lt_ac_max=$lt_ac_count lt_cv_path_SED=$lt_ac_sed fi done done ]) SED=$lt_cv_path_SED AC_SUBST([SED]) AC_MSG_RESULT([$SED]) ])#AC_PROG_SED ])#m4_ifndef # Old name: AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([LT_AC_PROG_SED], []) # _LT_CHECK_SHELL_FEATURES # ------------------------ # Find out whether the shell is Bourne or XSI compatible, # or has some other useful features. m4_defun([_LT_CHECK_SHELL_FEATURES], [AC_MSG_CHECKING([whether the shell understands some XSI constructs]) # Try some XSI features xsi_shell=no ( _lt_dummy="a/b/c" test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \ = c,a/b,, \ && eval 'test $(( 1 + 1 )) -eq 2 \ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ && xsi_shell=yes AC_MSG_RESULT([$xsi_shell]) _LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell']) AC_MSG_CHECKING([whether the shell understands "+="]) lt_shell_append=no ( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \ >/dev/null 2>&1 \ && lt_shell_append=yes AC_MSG_RESULT([$lt_shell_append]) _LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append']) if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then lt_unset=unset else lt_unset=false fi _LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl # test EBCDIC or ASCII case `echo X|tr X '\101'` in A) # ASCII based system # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr lt_SP2NL='tr \040 \012' lt_NL2SP='tr \015\012 \040\040' ;; *) # EBCDIC based system lt_SP2NL='tr \100 \n' lt_NL2SP='tr \r\n \100\100' ;; esac _LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl _LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl ])# _LT_CHECK_SHELL_FEATURES # _LT_PROG_XSI_SHELLFNS # --------------------- # Bourne and XSI compatible variants of some useful shell functions. m4_defun([_LT_PROG_XSI_SHELLFNS], [case $xsi_shell in yes) cat << \_LT_EOF >> "$cfgfile" # func_dirname file append nondir_replacement # Compute the dirname of FILE. If nonempty, add APPEND to the result, # otherwise set result to NONDIR_REPLACEMENT. func_dirname () { case ${1} in */*) func_dirname_result="${1%/*}${2}" ;; * ) func_dirname_result="${3}" ;; esac } # func_basename file func_basename () { func_basename_result="${1##*/}" } # func_dirname_and_basename file append nondir_replacement # perform func_basename and func_dirname in a single function # call: # dirname: Compute the dirname of FILE. If nonempty, # add APPEND to the result, otherwise set result # to NONDIR_REPLACEMENT. # value returned in "$func_dirname_result" # basename: Compute filename of FILE. # value retuned in "$func_basename_result" # Implementation must be kept synchronized with func_dirname # and func_basename. For efficiency, we do not delegate to # those functions but instead duplicate the functionality here. func_dirname_and_basename () { case ${1} in */*) func_dirname_result="${1%/*}${2}" ;; * ) func_dirname_result="${3}" ;; esac func_basename_result="${1##*/}" } # func_stripname prefix suffix name # strip PREFIX and SUFFIX off of NAME. # PREFIX and SUFFIX must not contain globbing or regex special # characters, hashes, percent signs, but SUFFIX may contain a leading # dot (in which case that matches only a dot). func_stripname () { # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are # positional parameters, so assign one to ordinary parameter first. func_stripname_result=${3} func_stripname_result=${func_stripname_result#"${1}"} func_stripname_result=${func_stripname_result%"${2}"} } # func_opt_split func_opt_split () { func_opt_split_opt=${1%%=*} func_opt_split_arg=${1#*=} } # func_lo2o object func_lo2o () { case ${1} in *.lo) func_lo2o_result=${1%.lo}.${objext} ;; *) func_lo2o_result=${1} ;; esac } # func_xform libobj-or-source func_xform () { func_xform_result=${1%.*}.lo } # func_arith arithmetic-term... func_arith () { func_arith_result=$(( $[*] )) } # func_len string # STRING may not start with a hyphen. func_len () { func_len_result=${#1} } _LT_EOF ;; *) # Bourne compatible functions. cat << \_LT_EOF >> "$cfgfile" # func_dirname file append nondir_replacement # Compute the dirname of FILE. If nonempty, add APPEND to the result, # otherwise set result to NONDIR_REPLACEMENT. func_dirname () { # Extract subdirectory from the argument. func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` if test "X$func_dirname_result" = "X${1}"; then func_dirname_result="${3}" else func_dirname_result="$func_dirname_result${2}" fi } # func_basename file func_basename () { func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` } dnl func_dirname_and_basename dnl A portable version of this function is already defined in general.m4sh dnl so there is no need for it here. # func_stripname prefix suffix name # strip PREFIX and SUFFIX off of NAME. # PREFIX and SUFFIX must not contain globbing or regex special # characters, hashes, percent signs, but SUFFIX may contain a leading # dot (in which case that matches only a dot). # func_strip_suffix prefix name func_stripname () { case ${2} in .*) func_stripname_result=`$ECHO "X${3}" \ | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;; *) func_stripname_result=`$ECHO "X${3}" \ | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;; esac } # sed scripts: my_sed_long_opt='1s/^\(-[[^=]]*\)=.*/\1/;q' my_sed_long_arg='1s/^-[[^=]]*=//' # func_opt_split func_opt_split () { func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"` func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"` } # func_lo2o object func_lo2o () { func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"` } # func_xform libobj-or-source func_xform () { func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[[^.]]*$/.lo/'` } # func_arith arithmetic-term... func_arith () { func_arith_result=`expr "$[@]"` } # func_len string # STRING may not start with a hyphen. func_len () { func_len_result=`expr "$[1]" : ".*" 2>/dev/null || echo $max_cmd_len` } _LT_EOF esac case $lt_shell_append in yes) cat << \_LT_EOF >> "$cfgfile" # func_append var value # Append VALUE to the end of shell variable VAR. func_append () { eval "$[1]+=\$[2]" } _LT_EOF ;; *) cat << \_LT_EOF >> "$cfgfile" # func_append var value # Append VALUE to the end of shell variable VAR. func_append () { eval "$[1]=\$$[1]\$[2]" } _LT_EOF ;; esac ]) netspeed_applet-0.16/m4/ltversion.m40000644000175000017500000000127711402461226014351 00000000000000# ltversion.m4 -- version numbers -*- Autoconf -*- # # Copyright (C) 2004 Free Software Foundation, Inc. # Written by Scott James Remnant, 2004 # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. # Generated from ltversion.in. # serial 3017 ltversion.m4 # This file is part of GNU Libtool m4_define([LT_PACKAGE_VERSION], [2.2.6b]) m4_define([LT_PACKAGE_REVISION], [1.3017]) AC_DEFUN([LTVERSION_VERSION], [macro_version='2.2.6b' macro_revision='1.3017' _LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?]) _LT_DECL(, macro_revision, 0) ]) netspeed_applet-0.16/m4/ltoptions.m40000644000175000017500000002724211402461225014356 00000000000000# Helper functions for option handling. -*- Autoconf -*- # # Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc. # Written by Gary V. Vaughan, 2004 # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. # serial 6 ltoptions.m4 # This is to help aclocal find these macros, as it can't see m4_define. AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])]) # _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME) # ------------------------------------------ m4_define([_LT_MANGLE_OPTION], [[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])]) # _LT_SET_OPTION(MACRO-NAME, OPTION-NAME) # --------------------------------------- # Set option OPTION-NAME for macro MACRO-NAME, and if there is a # matching handler defined, dispatch to it. Other OPTION-NAMEs are # saved as a flag. m4_define([_LT_SET_OPTION], [m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]), _LT_MANGLE_DEFUN([$1], [$2]), [m4_warning([Unknown $1 option `$2'])])[]dnl ]) # _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET]) # ------------------------------------------------------------ # Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. m4_define([_LT_IF_OPTION], [m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])]) # _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET) # ------------------------------------------------------- # Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME # are set. m4_define([_LT_UNLESS_OPTIONS], [m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option), [m4_define([$0_found])])])[]dnl m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3 ])[]dnl ]) # _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST) # ---------------------------------------- # OPTION-LIST is a space-separated list of Libtool options associated # with MACRO-NAME. If any OPTION has a matching handler declared with # LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about # the unknown option and exit. m4_defun([_LT_SET_OPTIONS], [# Set options m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), [_LT_SET_OPTION([$1], _LT_Option)]) m4_if([$1],[LT_INIT],[ dnl dnl Simply set some default values (i.e off) if boolean options were not dnl specified: _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no ]) _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no ]) dnl dnl If no reference was made to various pairs of opposing options, then dnl we run the default mode handler for the pair. For example, if neither dnl `shared' nor `disable-shared' was passed, we enable building of shared dnl archives by default: _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED]) _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC]) _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC]) _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install], [_LT_ENABLE_FAST_INSTALL]) ]) ])# _LT_SET_OPTIONS ## --------------------------------- ## ## Macros to handle LT_INIT options. ## ## --------------------------------- ## # _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME) # ----------------------------------------- m4_define([_LT_MANGLE_DEFUN], [[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])]) # LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE) # ----------------------------------------------- m4_define([LT_OPTION_DEFINE], [m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl ])# LT_OPTION_DEFINE # dlopen # ------ LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes ]) AU_DEFUN([AC_LIBTOOL_DLOPEN], [_LT_SET_OPTION([LT_INIT], [dlopen]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you put the `dlopen' option into LT_INIT's first parameter.]) ]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], []) # win32-dll # --------- # Declare package support for building win32 dll's. LT_OPTION_DEFINE([LT_INIT], [win32-dll], [enable_win32_dll=yes case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-cegcc*) AC_CHECK_TOOL(AS, as, false) AC_CHECK_TOOL(DLLTOOL, dlltool, false) AC_CHECK_TOOL(OBJDUMP, objdump, false) ;; esac test -z "$AS" && AS=as _LT_DECL([], [AS], [0], [Assembler program])dnl test -z "$DLLTOOL" && DLLTOOL=dlltool _LT_DECL([], [DLLTOOL], [0], [DLL creation program])dnl test -z "$OBJDUMP" && OBJDUMP=objdump _LT_DECL([], [OBJDUMP], [0], [Object dumper program])dnl ])# win32-dll AU_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_REQUIRE([AC_CANONICAL_HOST])dnl _LT_SET_OPTION([LT_INIT], [win32-dll]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you put the `win32-dll' option into LT_INIT's first parameter.]) ]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], []) # _LT_ENABLE_SHARED([DEFAULT]) # ---------------------------- # implement the --enable-shared flag, and supports the `shared' and # `disable-shared' LT_INIT options. # DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. m4_define([_LT_ENABLE_SHARED], [m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl AC_ARG_ENABLE([shared], [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@], [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])], [p=${PACKAGE-default} case $enableval in yes) enable_shared=yes ;; no) enable_shared=no ;; *) enable_shared=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_shared=yes fi done IFS="$lt_save_ifs" ;; esac], [enable_shared=]_LT_ENABLE_SHARED_DEFAULT) _LT_DECL([build_libtool_libs], [enable_shared], [0], [Whether or not to build shared libraries]) ])# _LT_ENABLE_SHARED LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])]) LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])]) # Old names: AC_DEFUN([AC_ENABLE_SHARED], [_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared]) ]) AC_DEFUN([AC_DISABLE_SHARED], [_LT_SET_OPTION([LT_INIT], [disable-shared]) ]) AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AM_ENABLE_SHARED], []) dnl AC_DEFUN([AM_DISABLE_SHARED], []) # _LT_ENABLE_STATIC([DEFAULT]) # ---------------------------- # implement the --enable-static flag, and support the `static' and # `disable-static' LT_INIT options. # DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. m4_define([_LT_ENABLE_STATIC], [m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl AC_ARG_ENABLE([static], [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@], [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])], [p=${PACKAGE-default} case $enableval in yes) enable_static=yes ;; no) enable_static=no ;; *) enable_static=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_static=yes fi done IFS="$lt_save_ifs" ;; esac], [enable_static=]_LT_ENABLE_STATIC_DEFAULT) _LT_DECL([build_old_libs], [enable_static], [0], [Whether or not to build static libraries]) ])# _LT_ENABLE_STATIC LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])]) LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])]) # Old names: AC_DEFUN([AC_ENABLE_STATIC], [_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static]) ]) AC_DEFUN([AC_DISABLE_STATIC], [_LT_SET_OPTION([LT_INIT], [disable-static]) ]) AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AM_ENABLE_STATIC], []) dnl AC_DEFUN([AM_DISABLE_STATIC], []) # _LT_ENABLE_FAST_INSTALL([DEFAULT]) # ---------------------------------- # implement the --enable-fast-install flag, and support the `fast-install' # and `disable-fast-install' LT_INIT options. # DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. m4_define([_LT_ENABLE_FAST_INSTALL], [m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl AC_ARG_ENABLE([fast-install], [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], [p=${PACKAGE-default} case $enableval in yes) enable_fast_install=yes ;; no) enable_fast_install=no ;; *) enable_fast_install=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_fast_install=yes fi done IFS="$lt_save_ifs" ;; esac], [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT) _LT_DECL([fast_install], [enable_fast_install], [0], [Whether or not to optimize for fast installation])dnl ])# _LT_ENABLE_FAST_INSTALL LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])]) LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])]) # Old names: AU_DEFUN([AC_ENABLE_FAST_INSTALL], [_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you put the `fast-install' option into LT_INIT's first parameter.]) ]) AU_DEFUN([AC_DISABLE_FAST_INSTALL], [_LT_SET_OPTION([LT_INIT], [disable-fast-install]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you put the `disable-fast-install' option into LT_INIT's first parameter.]) ]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], []) dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], []) # _LT_WITH_PIC([MODE]) # -------------------- # implement the --with-pic flag, and support the `pic-only' and `no-pic' # LT_INIT options. # MODE is either `yes' or `no'. If omitted, it defaults to `both'. m4_define([_LT_WITH_PIC], [AC_ARG_WITH([pic], [AS_HELP_STRING([--with-pic], [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], [pic_mode="$withval"], [pic_mode=default]) test -z "$pic_mode" && pic_mode=m4_default([$1], [default]) _LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl ])# _LT_WITH_PIC LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])]) LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])]) # Old name: AU_DEFUN([AC_LIBTOOL_PICMODE], [_LT_SET_OPTION([LT_INIT], [pic-only]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you put the `pic-only' option into LT_INIT's first parameter.]) ]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_PICMODE], []) ## ----------------- ## ## LTDL_INIT Options ## ## ----------------- ## m4_define([_LTDL_MODE], []) LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive], [m4_define([_LTDL_MODE], [nonrecursive])]) LT_OPTION_DEFINE([LTDL_INIT], [recursive], [m4_define([_LTDL_MODE], [recursive])]) LT_OPTION_DEFINE([LTDL_INIT], [subproject], [m4_define([_LTDL_MODE], [subproject])]) m4_define([_LTDL_TYPE], []) LT_OPTION_DEFINE([LTDL_INIT], [installable], [m4_define([_LTDL_TYPE], [installable])]) LT_OPTION_DEFINE([LTDL_INIT], [convenience], [m4_define([_LTDL_TYPE], [convenience])]) netspeed_applet-0.16/m4/gnome-doc-utils.m40000644000175000017500000000342311362773621015337 00000000000000dnl Do not call GNOME_DOC_DEFINES directly. It is split out from dnl GNOME_DOC_INIT to allow gnome-doc-utils to bootstrap off itself. AC_DEFUN([GNOME_DOC_DEFINES], [ AC_ARG_WITH([help-dir], AC_HELP_STRING([--with-help-dir=DIR], [path to help docs]),, [with_help_dir='${datadir}/gnome/help']) HELP_DIR="$with_help_dir" AC_SUBST(HELP_DIR) AC_ARG_WITH([omf-dir], AC_HELP_STRING([--with-omf-dir=DIR], [path to OMF files]),, [with_omf_dir='${datadir}/omf']) OMF_DIR="$with_omf_dir" AC_SUBST(OMF_DIR) AC_ARG_WITH([help-formats], AC_HELP_STRING([--with-help-formats=FORMATS], [list of formats]),, [with_help_formats='']) DOC_USER_FORMATS="$with_help_formats" AC_SUBST(DOC_USER_FORMATS) AC_ARG_ENABLE([scrollkeeper], [AC_HELP_STRING([--disable-scrollkeeper], [do not make updates to the scrollkeeper database])],, enable_scrollkeeper=yes) AM_CONDITIONAL([ENABLE_SK],[test "$gdu_cv_have_gdu" = "yes" -a "$enable_scrollkeeper" = "yes"]) dnl disable scrollkeeper automatically for distcheck DISTCHECK_CONFIGURE_FLAGS="--disable-scrollkeeper $DISTCHECK_CONFIGURE_FLAGS" AC_SUBST(DISTCHECK_CONFIGURE_FLAGS) AM_CONDITIONAL([HAVE_GNOME_DOC_UTILS],[test "$gdu_cv_have_gdu" = "yes"]) ]) # GNOME_DOC_INIT ([MINIMUM-VERSION],[ACTION-IF-FOUND],[ACTION-IF-NOT-FOUND]) # AC_DEFUN([GNOME_DOC_INIT], [AC_REQUIRE([AC_PROG_LN_S])dnl ifelse([$1],,[gdu_cv_version_required=0.3.2],[gdu_cv_version_required=$1]) AC_MSG_CHECKING([gnome-doc-utils >= $gdu_cv_version_required]) PKG_CHECK_EXISTS([gnome-doc-utils >= $gdu_cv_version_required], [gdu_cv_have_gdu=yes],[gdu_cv_have_gdu=no]) if test "$gdu_cv_have_gdu" = "yes"; then AC_MSG_RESULT([yes]) ifelse([$2],,[:],[$2]) else AC_MSG_RESULT([no]) ifelse([$3],,[AC_MSG_ERROR([gnome-doc-utils >= $gdu_cv_version_required not found])],[$3]) fi GNOME_DOC_DEFINES ]) netspeed_applet-0.16/m4/intltool.m40000644000175000017500000002421511402461230014160 00000000000000## intltool.m4 - Configure intltool for the target system. -*-Shell-script-*- ## Copyright (C) 2001 Eazel, Inc. ## Author: Maciej Stachowiak ## Kenneth Christiansen ## ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2 of the License, or ## (at your option) any later version. ## ## This program is distributed in the hope that it will be useful, but ## WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ## General Public License for more details. ## ## You should have received a copy of the GNU General Public License ## along with this program; if not, write to the Free Software ## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ## ## As a special exception to the GNU General Public License, if you ## distribute this file as part of a program that contains a ## configuration script generated by Autoconf, you may include it under ## the same distribution terms that you use for the rest of that program. dnl IT_PROG_INTLTOOL([MINIMUM-VERSION], [no-xml]) # serial 40 IT_PROG_INTLTOOL AC_DEFUN([IT_PROG_INTLTOOL], [ AC_PREREQ([2.50])dnl AC_REQUIRE([AM_NLS])dnl case "$am__api_version" in 1.[01234]) AC_MSG_ERROR([Automake 1.5 or newer is required to use intltool]) ;; *) ;; esac if test -n "$1"; then AC_MSG_CHECKING([for intltool >= $1]) INTLTOOL_REQUIRED_VERSION_AS_INT=`echo $1 | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` INTLTOOL_APPLIED_VERSION=`intltool-update --version | head -1 | cut -d" " -f3` [INTLTOOL_APPLIED_VERSION_AS_INT=`echo $INTLTOOL_APPLIED_VERSION | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` ] AC_MSG_RESULT([$INTLTOOL_APPLIED_VERSION found]) test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge "$INTLTOOL_REQUIRED_VERSION_AS_INT" || AC_MSG_ERROR([Your intltool is too old. You need intltool $1 or later.]) fi AC_PATH_PROG(INTLTOOL_UPDATE, [intltool-update]) AC_PATH_PROG(INTLTOOL_MERGE, [intltool-merge]) AC_PATH_PROG(INTLTOOL_EXTRACT, [intltool-extract]) if test -z "$INTLTOOL_UPDATE" -o -z "$INTLTOOL_MERGE" -o -z "$INTLTOOL_EXTRACT"; then AC_MSG_ERROR([The intltool scripts were not found. Please install intltool.]) fi INTLTOOL_DESKTOP_RULE='%.desktop: %.desktop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_DIRECTORY_RULE='%.directory: %.directory.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_KEYS_RULE='%.keys: %.keys.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -k -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_PROP_RULE='%.prop: %.prop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_OAF_RULE='%.oaf: %.oaf.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -o -p $(top_srcdir)/po $< [$]@' INTLTOOL_PONG_RULE='%.pong: %.pong.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_SERVER_RULE='%.server: %.server.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -o -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_SHEET_RULE='%.sheet: %.sheet.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_SOUNDLIST_RULE='%.soundlist: %.soundlist.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_UI_RULE='%.ui: %.ui.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_XML_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_XML_NOMERGE_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u /tmp $< [$]@' INTLTOOL_XAM_RULE='%.xam: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_KBD_RULE='%.kbd: %.kbd.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -m -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_CAVES_RULE='%.caves: %.caves.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_SCHEMAS_RULE='%.schemas: %.schemas.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -s -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_THEME_RULE='%.theme: %.theme.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_SERVICE_RULE='%.service: %.service.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' INTLTOOL_POLICY_RULE='%.policy: %.policy.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' _IT_SUBST(INTLTOOL_DESKTOP_RULE) _IT_SUBST(INTLTOOL_DIRECTORY_RULE) _IT_SUBST(INTLTOOL_KEYS_RULE) _IT_SUBST(INTLTOOL_PROP_RULE) _IT_SUBST(INTLTOOL_OAF_RULE) _IT_SUBST(INTLTOOL_PONG_RULE) _IT_SUBST(INTLTOOL_SERVER_RULE) _IT_SUBST(INTLTOOL_SHEET_RULE) _IT_SUBST(INTLTOOL_SOUNDLIST_RULE) _IT_SUBST(INTLTOOL_UI_RULE) _IT_SUBST(INTLTOOL_XAM_RULE) _IT_SUBST(INTLTOOL_KBD_RULE) _IT_SUBST(INTLTOOL_XML_RULE) _IT_SUBST(INTLTOOL_XML_NOMERGE_RULE) _IT_SUBST(INTLTOOL_CAVES_RULE) _IT_SUBST(INTLTOOL_SCHEMAS_RULE) _IT_SUBST(INTLTOOL_THEME_RULE) _IT_SUBST(INTLTOOL_SERVICE_RULE) _IT_SUBST(INTLTOOL_POLICY_RULE) # Check the gettext tools to make sure they are GNU AC_PATH_PROG(XGETTEXT, xgettext) AC_PATH_PROG(MSGMERGE, msgmerge) AC_PATH_PROG(MSGFMT, msgfmt) AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) if test -z "$XGETTEXT" -o -z "$MSGMERGE" -o -z "$MSGFMT"; then AC_MSG_ERROR([GNU gettext tools not found; required for intltool]) fi xgversion="`$XGETTEXT --version|grep '(GNU ' 2> /dev/null`" mmversion="`$MSGMERGE --version|grep '(GNU ' 2> /dev/null`" mfversion="`$MSGFMT --version|grep '(GNU ' 2> /dev/null`" if test -z "$xgversion" -o -z "$mmversion" -o -z "$mfversion"; then AC_MSG_ERROR([GNU gettext tools not found; required for intltool]) fi AC_PATH_PROG(INTLTOOL_PERL, perl) if test -z "$INTLTOOL_PERL"; then AC_MSG_ERROR([perl not found]) fi AC_MSG_CHECKING([for perl >= 5.8.1]) $INTLTOOL_PERL -e "use 5.8.1;" > /dev/null 2>&1 if test $? -ne 0; then AC_MSG_ERROR([perl 5.8.1 is required for intltool]) else IT_PERL_VERSION="`$INTLTOOL_PERL -e \"printf '%vd', $^V\"`" AC_MSG_RESULT([$IT_PERL_VERSION]) fi if test "x$2" != "xno-xml"; then AC_MSG_CHECKING([for XML::Parser]) if `$INTLTOOL_PERL -e "require XML::Parser" 2>/dev/null`; then AC_MSG_RESULT([ok]) else AC_MSG_ERROR([XML::Parser perl module is required for intltool]) fi fi # Substitute ALL_LINGUAS so we can use it in po/Makefile AC_SUBST(ALL_LINGUAS) # Set DATADIRNAME correctly if it is not set yet # (copied from glib-gettext.m4) if test -z "$DATADIRNAME"; then AC_LINK_IFELSE( [AC_LANG_PROGRAM([[]], [[extern int _nl_msg_cat_cntr; return _nl_msg_cat_cntr]])], [DATADIRNAME=share], [case $host in *-*-solaris*) dnl On Solaris, if bind_textdomain_codeset is in libc, dnl GNU format message catalog is always supported, dnl since both are added to the libc all together. dnl Hence, we'd like to go with DATADIRNAME=share dnl in this case. AC_CHECK_FUNC(bind_textdomain_codeset, [DATADIRNAME=share], [DATADIRNAME=lib]) ;; *) [DATADIRNAME=lib] ;; esac]) fi AC_SUBST(DATADIRNAME) IT_PO_SUBDIR([po]) ]) # IT_PO_SUBDIR(DIRNAME) # --------------------- # All po subdirs have to be declared with this macro; the subdir "po" is # declared by IT_PROG_INTLTOOL. # AC_DEFUN([IT_PO_SUBDIR], [AC_PREREQ([2.53])dnl We use ac_top_srcdir inside AC_CONFIG_COMMANDS. dnl dnl The following CONFIG_COMMANDS should be exetuted at the very end dnl of config.status. AC_CONFIG_COMMANDS_PRE([ AC_CONFIG_COMMANDS([$1/stamp-it], [ if [ ! grep "^# INTLTOOL_MAKEFILE$" "$1/Makefile.in" > /dev/null ]; then AC_MSG_ERROR([$1/Makefile.in.in was not created by intltoolize.]) fi rm -f "$1/stamp-it" "$1/stamp-it.tmp" "$1/POTFILES" "$1/Makefile.tmp" >"$1/stamp-it.tmp" [sed '/^#/d s/^[[].*] *// /^[ ]*$/d '"s|^| $ac_top_srcdir/|" \ "$srcdir/$1/POTFILES.in" | sed '$!s/$/ \\/' >"$1/POTFILES" ] [sed '/^POTFILES =/,/[^\\]$/ { /^POTFILES =/!d r $1/POTFILES } ' "$1/Makefile.in" >"$1/Makefile"] rm -f "$1/Makefile.tmp" mv "$1/stamp-it.tmp" "$1/stamp-it" ]) ])dnl ]) # _IT_SUBST(VARIABLE) # ------------------- # Abstract macro to do either _AM_SUBST_NOTMAKE or AC_SUBST # AC_DEFUN([_IT_SUBST], [ AC_SUBST([$1]) m4_ifdef([_AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE([$1])]) ] ) # deprecated macros AU_ALIAS([AC_PROG_INTLTOOL], [IT_PROG_INTLTOOL]) # A hint is needed for aclocal from Automake <= 1.9.4: # AC_DEFUN([AC_PROG_INTLTOOL], ...) netspeed_applet-0.16/m4/ltsugar.m40000644000175000017500000001042411402461226013777 00000000000000# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*- # # Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc. # Written by Gary V. Vaughan, 2004 # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. # serial 6 ltsugar.m4 # This is to help aclocal find these macros, as it can't see m4_define. AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])]) # lt_join(SEP, ARG1, [ARG2...]) # ----------------------------- # Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their # associated separator. # Needed until we can rely on m4_join from Autoconf 2.62, since all earlier # versions in m4sugar had bugs. m4_define([lt_join], [m4_if([$#], [1], [], [$#], [2], [[$2]], [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])]) m4_define([_lt_join], [m4_if([$#$2], [2], [], [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])]) # lt_car(LIST) # lt_cdr(LIST) # ------------ # Manipulate m4 lists. # These macros are necessary as long as will still need to support # Autoconf-2.59 which quotes differently. m4_define([lt_car], [[$1]]) m4_define([lt_cdr], [m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])], [$#], 1, [], [m4_dquote(m4_shift($@))])]) m4_define([lt_unquote], $1) # lt_append(MACRO-NAME, STRING, [SEPARATOR]) # ------------------------------------------ # Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'. # Note that neither SEPARATOR nor STRING are expanded; they are appended # to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked). # No SEPARATOR is output if MACRO-NAME was previously undefined (different # than defined and empty). # # This macro is needed until we can rely on Autoconf 2.62, since earlier # versions of m4sugar mistakenly expanded SEPARATOR but not STRING. m4_define([lt_append], [m4_define([$1], m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])]) # lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...]) # ---------------------------------------------------------- # Produce a SEP delimited list of all paired combinations of elements of # PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list # has the form PREFIXmINFIXSUFFIXn. # Needed until we can rely on m4_combine added in Autoconf 2.62. m4_define([lt_combine], [m4_if(m4_eval([$# > 3]), [1], [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl [[m4_foreach([_Lt_prefix], [$2], [m4_foreach([_Lt_suffix], ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[, [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])]) # lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ]) # ----------------------------------------------------------------------- # Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited # by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ. m4_define([lt_if_append_uniq], [m4_ifdef([$1], [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1], [lt_append([$1], [$2], [$3])$4], [$5])], [lt_append([$1], [$2], [$3])$4])]) # lt_dict_add(DICT, KEY, VALUE) # ----------------------------- m4_define([lt_dict_add], [m4_define([$1($2)], [$3])]) # lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE) # -------------------------------------------- m4_define([lt_dict_add_subkey], [m4_define([$1($2:$3)], [$4])]) # lt_dict_fetch(DICT, KEY, [SUBKEY]) # ---------------------------------- m4_define([lt_dict_fetch], [m4_ifval([$3], m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]), m4_ifdef([$1($2)], [m4_defn([$1($2)])]))]) # lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE]) # ----------------------------------------------------------------- m4_define([lt_if_dict_fetch], [m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4], [$5], [$6])]) # lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...]) # -------------------------------------------------------------- m4_define([lt_dict_filter], [m4_if([$5], [], [], [lt_join(m4_quote(m4_default([$4], [[, ]])), lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]), [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl ]) netspeed_applet-0.16/m4/lt~obsolete.m40000644000175000017500000001311311402461227014667 00000000000000# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*- # # Copyright (C) 2004, 2005, 2007 Free Software Foundation, Inc. # Written by Scott James Remnant, 2004. # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. # serial 4 lt~obsolete.m4 # These exist entirely to fool aclocal when bootstrapping libtool. # # In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN) # which have later been changed to m4_define as they aren't part of the # exported API, or moved to Autoconf or Automake where they belong. # # The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN # in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us # using a macro with the same name in our local m4/libtool.m4 it'll # pull the old libtool.m4 in (it doesn't see our shiny new m4_define # and doesn't know about Autoconf macros at all.) # # So we provide this file, which has a silly filename so it's always # included after everything else. This provides aclocal with the # AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything # because those macros already exist, or will be overwritten later. # We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. # # Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here. # Yes, that means every name once taken will need to remain here until # we give up compatibility with versions before 1.7, at which point # we need to keep only those names which we still refer to. # This is to help aclocal find these macros, as it can't see m4_define. AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])]) m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])]) m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])]) m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])]) m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])]) m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])]) m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])]) m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])]) m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])]) m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])]) m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])]) m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])]) m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])]) m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])]) m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])]) m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])]) m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])]) m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])]) m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])]) m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])]) m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])]) m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])]) m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])]) m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])]) m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])]) m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])]) m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])]) m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])]) m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])]) m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])]) m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])]) m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])]) m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])]) m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])]) m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])]) m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])]) m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])]) m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])]) m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])]) m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])]) m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])]) m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])]) m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])]) m4_ifndef([AC_LIBTOOL_RC], [AC_DEFUN([AC_LIBTOOL_RC])]) m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])]) m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])]) m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])]) m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])]) m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])]) m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])]) m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])]) m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])]) m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])]) m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])]) m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])]) m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])]) netspeed_applet-0.16/src/0000755000175000017500000000000011402462067012406 500000000000000netspeed_applet-0.16/src/Makefile.am0000644000175000017500000000073211402426203014354 00000000000000INCLUDES = -I$(top_srcdir) -I$(includedir) $(NETSPEED_CFLAGS) $(NETSPEED_LIBGTOP_CFLAGS) \ -DGNOMELOCALEDIR=\""$(datadir)/locale"\" \ -DDATADIR=\""$(datadir)/"\" \ -DPREFIX=\""$(prefix)/"\" \ -DLIBDIR=\""$(libdir)/"\" \ -DSYSCONFDIR=\""$(sysconfdir)/"\" libexec_PROGRAMS = netspeed_applet2 netspeed_applet2_SOURCES = backend.h backend.c netspeed.c netspeed_applet2_LDADD = $(NETSPEED_LIBS) $(NETSPEED_LIBGTOP_LIBS) $(IWLIB) $(INTLLIBS) netspeed_applet-0.16/src/backend.h0000644000175000017500000000425411402441264014067 00000000000000/* backend.h * vim:ts=4:sw=4:noexpandtab:cindent * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU Library General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * * Netspeed Applet was writen by Jörgen Scheibengruber */ #ifndef _BACKEND_H #define _BACKEND_H #include #include #include #include #include #include #include #include #include #include #include #include /* copied from */ #define SIOCGIWNAME 0x8B01 /* get name == wireless protocol */ #define SIOCGIWENCODE 0x8B2B /* get encoding token & mode */ /* Different types of interfaces */ typedef enum { DEV_LO, DEV_ETHERNET, DEV_WIRELESS, DEV_PPP, DEV_PLIP, DEV_SLIP, DEV_UNKNOWN // this has to be the last one } DevType; /* Some information about the selected network device */ typedef struct { DevType type; char *name; char *ip; char *netmask; char *hwaddr; char *ptpip; char *ipv6; char *essid; gboolean up, running; guint64 tx, rx; int qual; char *tx_rate; char *rx_rate; char *sum_rate; } DevInfo; GList* get_available_devices(void); const gchar* get_default_route(void); gboolean is_dummy_device(const char* device); void free_devices_list(GList *list); void free_device_info(DevInfo *devinfo); void get_device_info(const char *device, DevInfo *info); gboolean compare_device_info(const DevInfo *a, const DevInfo *b); void get_wireless_info (DevInfo *devinfo); #endif /* _BACKEND_H */ netspeed_applet-0.16/src/Makefile.in0000644000175000017500000004242311402461244014374 00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ libexec_PROGRAMS = netspeed_applet2$(EXEEXT) subdir = src DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = am__installdirs = "$(DESTDIR)$(libexecdir)" PROGRAMS = $(libexec_PROGRAMS) am_netspeed_applet2_OBJECTS = backend.$(OBJEXT) netspeed.$(OBJEXT) netspeed_applet2_OBJECTS = $(am_netspeed_applet2_OBJECTS) am__DEPENDENCIES_1 = netspeed_applet2_DEPENDENCIES = $(am__DEPENDENCIES_1) \ $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) depcomp = $(SHELL) $(top_srcdir)/depcomp am__depfiles_maybe = depfiles am__mv = mv -f COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ $(LDFLAGS) -o $@ SOURCES = $(netspeed_applet2_SOURCES) DIST_SOURCES = $(netspeed_applet2_SOURCES) ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ ALL_LINGUAS = @ALL_LINGUAS@ AMTAR = @AMTAR@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CATALOGS = @CATALOGS@ CATOBJEXT = @CATOBJEXT@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ DOC_USER_FORMATS = @DOC_USER_FORMATS@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GMOFILES = @GMOFILES@ GMSGFMT = @GMSGFMT@ GREP = @GREP@ HELP_DIR = @HELP_DIR@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTOBJEXT = @INSTOBJEXT@ INTLLIBS = @INTLLIBS@ INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ INTLTOOL_MERGE = @INTLTOOL_MERGE@ INTLTOOL_PERL = @INTLTOOL_PERL@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ IWLIB = @IWLIB@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ MKINSTALLDIRS = @MKINSTALLDIRS@ MSGFMT = @MSGFMT@ MSGFMT_OPTS = @MSGFMT_OPTS@ MSGMERGE = @MSGMERGE@ NETSPEED_APPLET_CFLAGS = @NETSPEED_APPLET_CFLAGS@ NETSPEED_APPLET_LIBS = @NETSPEED_APPLET_LIBS@ NETSPEED_CFLAGS = @NETSPEED_CFLAGS@ NETSPEED_LIBS = @NETSPEED_LIBS@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OMF_DIR = @OMF_DIR@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ POFILES = @POFILES@ POSUB = @POSUB@ PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ XGETTEXT = @XGETTEXT@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ INCLUDES = -I$(top_srcdir) -I$(includedir) $(NETSPEED_CFLAGS) $(NETSPEED_LIBGTOP_CFLAGS) \ -DGNOMELOCALEDIR=\""$(datadir)/locale"\" \ -DDATADIR=\""$(datadir)/"\" \ -DPREFIX=\""$(prefix)/"\" \ -DLIBDIR=\""$(libdir)/"\" \ -DSYSCONFDIR=\""$(sysconfdir)/"\" netspeed_applet2_SOURCES = backend.h backend.c netspeed.c netspeed_applet2_LDADD = $(NETSPEED_LIBS) $(NETSPEED_LIBGTOP_LIBS) $(IWLIB) $(INTLLIBS) all: all-am .SUFFIXES: .SUFFIXES: .c .lo .o .obj $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu src/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): install-libexecPROGRAMS: $(libexec_PROGRAMS) @$(NORMAL_INSTALL) test -z "$(libexecdir)" || $(MKDIR_P) "$(DESTDIR)$(libexecdir)" @list='$(libexec_PROGRAMS)'; test -n "$(libexecdir)" || list=; \ for p in $$list; do echo "$$p $$p"; done | \ sed 's/$(EXEEXT)$$//' | \ while read p p1; do if test -f $$p || test -f $$p1; \ then echo "$$p"; echo "$$p"; else :; fi; \ done | \ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ sed 'N;N;N;s,\n, ,g' | \ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ if ($$2 == $$4) files[d] = files[d] " " $$1; \ else { print "f", $$3 "/" $$4, $$1; } } \ END { for (d in files) print "f", d, files[d] }' | \ while read type dir files; do \ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ test -z "$$files" || { \ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(libexecdir)$$dir'"; \ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(libexecdir)$$dir" || exit $$?; \ } \ ; done uninstall-libexecPROGRAMS: @$(NORMAL_UNINSTALL) @list='$(libexec_PROGRAMS)'; test -n "$(libexecdir)" || list=; \ files=`for p in $$list; do echo "$$p"; done | \ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ -e 's/$$/$(EXEEXT)/' `; \ test -n "$$list" || exit 0; \ echo " ( cd '$(DESTDIR)$(libexecdir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(libexecdir)" && rm -f $$files clean-libexecPROGRAMS: @list='$(libexec_PROGRAMS)'; test -n "$$list" || exit 0; \ echo " rm -f" $$list; \ rm -f $$list || exit $$?; \ test -n "$(EXEEXT)" || exit 0; \ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ echo " rm -f" $$list; \ rm -f $$list netspeed_applet2$(EXEEXT): $(netspeed_applet2_OBJECTS) $(netspeed_applet2_DEPENDENCIES) @rm -f netspeed_applet2$(EXEEXT) $(LINK) $(netspeed_applet2_OBJECTS) $(netspeed_applet2_LDADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/backend.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/netspeed.Po@am__quote@ .c.o: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c $< .c.obj: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` .c.lo: @am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: CTAGS CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(PROGRAMS) installdirs: for dir in "$(DESTDIR)$(libexecdir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libexecPROGRAMS clean-libtool \ mostlyclean-am distclean: distclean-am -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-libexecPROGRAMS install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-libexecPROGRAMS .MAKE: install-am install-strip .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ clean-libexecPROGRAMS clean-libtool ctags distclean \ distclean-compile distclean-generic distclean-libtool \ distclean-tags distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-dvi \ install-dvi-am install-exec install-exec-am install-html \ install-html-am install-info install-info-am \ install-libexecPROGRAMS install-man install-pdf install-pdf-am \ install-ps install-ps-am install-strip installcheck \ installcheck-am installdirs maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-compile \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags uninstall uninstall-am uninstall-libexecPROGRAMS # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: netspeed_applet-0.16/src/backend.c0000644000175000017500000001633311402453454014067 00000000000000/* backend.c * vim:ts=4:sw=4:noexpandtab:cindent * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU Library General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * * Netspeed Applet was writen by Jörgen Scheibengruber */ #ifdef HAVE_CONFIG_H #include "config.h" #endif #if defined(sun) && defined(__SVR4) #include #endif #include #include #ifdef HAVE_IW #include #endif /* HAVE_IW */ #include "backend.h" gboolean is_dummy_device(const char* device) { glibtop_netload netload; glibtop_get_netload(&netload, device); if (netload.if_flags & (1 << GLIBTOP_IF_FLAGS_LOOPBACK)) return TRUE; /* Skip interfaces without any IPv4/IPv6 address (or those with only a LINK ipv6 addr) However we need to be able to exclude these while still keeping the value so when they get online (with NetworkManager for example) we don't get a suddent peak. Once we're able to get this, ignoring down interfaces will be possible too. */ if (!(netload.flags & (1 << GLIBTOP_NETLOAD_ADDRESS6) && netload.scope6 != GLIBTOP_IF_IN6_SCOPE_LINK) && !(netload.flags & (1 << GLIBTOP_NETLOAD_ADDRESS))) return TRUE; return FALSE; } /* Check for all available devices. This really should be * portable for at least all plattforms using the gnu c lib * TODO: drop it, use glibtop_get_netlist directly / gchar** */ GList* get_available_devices(void) { glibtop_netlist buf; char **devices, **dev; GList *device_glist = NULL; devices = glibtop_get_netlist(&buf); for(dev = devices; *dev; ++dev) { device_glist = g_list_prepend(device_glist, g_strdup(*dev)); } g_strfreev(devices); return device_glist; } const gchar* get_default_route(void) { FILE *fp; static char device[50]; fp = fopen("/proc/net/route", "r"); if (fp == NULL) return NULL; while (!feof(fp)) { char buffer[1024]; unsigned int ip, gw, flags, ref, use, metric, mask, mtu, window, irtt; int retval; char *rv; rv = fgets(buffer, 1024, fp); if (!rv) { break; } retval = sscanf(buffer, "%49s %x %x %x %d %d %d %x %d %d %d", device, &ip, &gw, &flags, &ref, &use, &metric, &mask, &mtu, &window, &irtt); if (retval != 11) continue; if (ip == 0 && !is_dummy_device(device)) { fclose(fp); return device; } } fclose(fp); return NULL; } void free_devices_list(GList *list) { g_list_foreach(list, (GFunc)g_free, NULL); g_list_free(list); } /* Frees a DevInfo struct and all the stuff it contains */ void free_device_info(DevInfo *devinfo) { g_free(devinfo->name); g_free(devinfo->ip); g_free(devinfo->netmask); g_free(devinfo->ptpip); g_free(devinfo->hwaddr); g_free(devinfo->ipv6); g_free(devinfo->essid); g_free(devinfo->tx_rate); g_free(devinfo->rx_rate); g_free(devinfo->sum_rate); } static char* format_ipv4(guint32 ip) { char *str = g_malloc(INET_ADDRSTRLEN); inet_ntop(AF_INET, &ip, str, INET_ADDRSTRLEN); return str; } static char* format_ipv6(const guint8 ip[16]) { char *str = g_malloc(INET6_ADDRSTRLEN); inet_ntop(AF_INET6, ip, str, INET6_ADDRSTRLEN); return str; } /* TODO: these stuff are not portable because of ioctl */ static void get_ptp_info(DevInfo *devinfo) { int fd = -1; struct ifreq request = {}; g_strlcpy(request.ifr_name, devinfo->name, sizeof request.ifr_name); if ((fd = socket(AF_INET, SOCK_STREAM, 0)) < 0) return; if (ioctl(fd, SIOCGIFDSTADDR, &request) >= 0) { struct sockaddr_in* addr; addr = (struct sockaddr_in*)&request.ifr_dstaddr; devinfo->ptpip = format_ipv4(addr->sin_addr.s_addr); } close(fd); } void get_device_info(const char *device, DevInfo *devinfo) { glibtop_netload netload; guint8 *hw; g_assert(device); memset(devinfo, 0, sizeof *devinfo); devinfo->name = g_strdup(device); devinfo->type = DEV_UNKNOWN; glibtop_get_netload(&netload, device); devinfo->tx = netload.bytes_out; devinfo->rx = netload.bytes_in; devinfo->up = (netload.if_flags & (1L << GLIBTOP_IF_FLAGS_UP) ? TRUE : FALSE); devinfo->running = (netload.if_flags & (1L << GLIBTOP_IF_FLAGS_RUNNING) ? TRUE : FALSE); devinfo->ip = format_ipv4(netload.address); devinfo->netmask = format_ipv4(netload.subnet); devinfo->ipv6 = format_ipv6(netload.address6); devinfo->qual = 0; devinfo->essid = NULL; hw = netload.hwaddress; if (hw[6] || hw[7]) { devinfo->hwaddr = g_strdup_printf( "%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X", hw[0], hw[1], hw[2], hw[3], hw[4], hw[5], hw[6], hw[7]); } else { devinfo->hwaddr = g_strdup_printf( "%02X:%02X:%02X:%02X:%02X:%02X", hw[0], hw[1], hw[2], hw[3], hw[4], hw[5]); } /* stolen from gnome-applets/multiload/linux-proc.c */ if(netload.if_flags & (1L << GLIBTOP_IF_FLAGS_LOOPBACK)) { devinfo->type = DEV_LO; } #ifdef HAVE_IW else if (netload.if_flags & (1L << GLIBTOP_IF_FLAGS_WIRELESS)) { devinfo->type = DEV_WIRELESS; get_wireless_info (devinfo); } #endif /* HAVE_IW */ else if(netload.if_flags & (1L << GLIBTOP_IF_FLAGS_POINTOPOINT)) { if (g_str_has_prefix(device, "plip")) { devinfo->type = DEV_PLIP; } else if (g_str_has_prefix(device, "sl")) { devinfo->type = DEV_SLIP; } else { devinfo->type = DEV_PPP; } get_ptp_info(devinfo); } else { devinfo->type = DEV_ETHERNET; } } gboolean compare_device_info(const DevInfo *a, const DevInfo *b) { g_assert(a && b); g_assert(a->name && b->name); if (!g_str_equal(a->name, b->name)) return TRUE; if (a->ip && b->ip) { if (!g_str_equal(a->ip, b->ip)) return TRUE; } else { if (a->ip || b->ip) return TRUE; } /* Ignore hwaddr, ptpip and netmask... I think this is ok */ if (a->up != b->up) return TRUE; if (a->running != b->running) return TRUE; return FALSE; } #ifdef HAVE_IW void get_wireless_info (DevInfo *devinfo) { int fd; int newqual; wireless_info info = {0}; fd = iw_sockets_open (); if (fd < 0) return; if (iw_get_basic_config (fd, devinfo->name, &info.b) < 0) goto out; if (info.b.has_essid) { if ((!devinfo->essid) || (strcmp (devinfo->essid, info.b.essid) != 0)) { devinfo->essid = g_strdup (info.b.essid); } } else { devinfo->essid = NULL; } if (iw_get_stats (fd, devinfo->name, &info.stats, &info.range, info.has_range) >= 0) info.has_stats = 1; if (info.has_stats) { if ((iw_get_range_info(fd, devinfo->name, &info.range) >= 0) && (info.range.max_qual.qual > 0)) { newqual = 0.5f + (100.0f * info.stats.qual.qual) / (1.0f * info.range.max_qual.qual); } else { newqual = info.stats.qual.qual; } newqual = CLAMP(newqual, 0, 100); if (devinfo->qual != newqual) devinfo->qual = newqual; } else { devinfo->qual = 0; } goto out; out: if (fd != -1) close (fd); } #endif /* HAVE_IW */ netspeed_applet-0.16/src/netspeed.c0000644000175000017500000015041211402454343014302 00000000000000/* netspeed.c * vim:ts=4:sw=4:noexpandtab:cindent * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU Library General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * * Netspeed Applet was writen by Jörgen Scheibengruber */ #ifdef HAVE_CONFIG_H #include "config.h" #endif #include #include #include #include #include #include "backend.h" /* Icons for the interfaces */ static const char* const dev_type_icon[DEV_UNKNOWN + 1] = { "netspeed-loopback", /* DEV_LO */ "network-wired", /* DEV_ETHERNET */ "network-wireless", /* DEV_WIRELESS */ "netspeed-ppp", /* DEV_PPP */ "netspeed-plip", /* DEV_PLIP */ "netspeed-plip", /* DEV_SLIP */ "network-workgroup", /* DEV_UNKNOWN */ }; static const char* wireless_quality_icon[] = { "netspeed-wireless-25", "netspeed-wireless-50", "netspeed-wireless-75", "netspeed-wireless-100" }; static const char IN_ICON[] = "stock_navigate-next"; static const char OUT_ICON[] = "stock_navigate-prev"; static const char ERROR_ICON[] = "gtk-dialog-error"; static const char LOGO_ICON[] = "netspeed-applet"; /* How many old in out values do we store? * The value actually shown in the applet is the average * of these values -> prevents the value from * "jumping around like crazy" */ #define OLD_VALUES 5 #define GRAPH_VALUES 180 #define GRAPH_LINES 4 /* A struct containing all the "global" data of the * applet */ typedef struct { PanelApplet *applet; GtkWidget *box, *pix_box, *in_box, *in_label, *in_pix, *out_box, *out_label, *out_pix, *sum_box, *sum_label, *dev_pix, *qual_pix; GdkPixbuf *qual_pixbufs[4]; GtkWidget *signalbar; gboolean labels_dont_shrink; DevInfo devinfo; gboolean device_has_changed; guint timeout_id; int refresh_time; char *up_cmd, *down_cmd; gboolean show_sum, show_bits; gboolean change_icon, auto_change_device; GdkColor in_color, out_color; int width; GtkWidget *inbytes_text, *outbytes_text; GtkDialog *details, *settings; GtkDrawingArea *drawingarea; GtkWidget *network_device_combo; guint index_old; guint64 in_old[OLD_VALUES], out_old[OLD_VALUES]; double max_graph, in_graph[GRAPH_VALUES], out_graph[GRAPH_VALUES]; int index_graph; GtkWidget *connect_dialog; gboolean show_tooltip; } NetspeedApplet; static const char netspeed_applet_menu_xml [] = "\n" " \n" " \n" " \n" " \n" " \n" "\n"; static void update_tooltip(NetspeedApplet* applet); static void device_change_cb(GtkComboBox *combo, NetspeedApplet *applet); static gboolean open_uri (GtkWidget *parent, const char *url, GError **error) { gboolean ret; char *cmdline; GdkScreen *screen; screen = gtk_widget_get_screen (parent); cmdline = g_strconcat ("xdg-open ", url, NULL); ret = gdk_spawn_command_line_on_screen (screen, cmdline, error); g_free (cmdline); return ret; } /* Adds a Pango markup "size" to a bytestring */ static void add_markup_size(char **string, int size) { char *tmp = *string; *string = g_strdup_printf("%s", size * 1000, tmp); g_free(tmp); } /* Adds a Pango markup "foreground" to a bytestring */ static void add_markup_fgcolor(char **string, const char *color) { char *tmp = *string; *string = g_strdup_printf("%s", color, tmp); g_free(tmp); } /* Here some rearangement of the icons and the labels occurs * according to the panelsize and wether we show in and out * or just the sum */ static void applet_change_size_or_orient(PanelApplet *applet_widget, int arg1, NetspeedApplet *applet) { int size; PanelAppletOrient orient; g_assert(applet); size = panel_applet_get_size(applet_widget); orient = panel_applet_get_orient(applet_widget); gtk_widget_ref(applet->pix_box); gtk_widget_ref(applet->in_pix); gtk_widget_ref(applet->in_label); gtk_widget_ref(applet->out_pix); gtk_widget_ref(applet->out_label); gtk_widget_ref(applet->sum_label); if (applet->in_box) { gtk_container_remove(GTK_CONTAINER(applet->in_box), applet->in_label); gtk_container_remove(GTK_CONTAINER(applet->in_box), applet->in_pix); gtk_widget_destroy(applet->in_box); } if (applet->out_box) { gtk_container_remove(GTK_CONTAINER(applet->out_box), applet->out_label); gtk_container_remove(GTK_CONTAINER(applet->out_box), applet->out_pix); gtk_widget_destroy(applet->out_box); } if (applet->sum_box) { gtk_container_remove(GTK_CONTAINER(applet->sum_box), applet->sum_label); gtk_widget_destroy(applet->sum_box); } if (applet->box) { gtk_container_remove(GTK_CONTAINER(applet->box), applet->pix_box); gtk_widget_destroy(applet->box); } if (orient == PANEL_APPLET_ORIENT_LEFT || orient == PANEL_APPLET_ORIENT_RIGHT) { applet->box = gtk_vbox_new(FALSE, 0); if (size > 64) { applet->sum_box = gtk_hbox_new(FALSE, 2); applet->in_box = gtk_hbox_new(FALSE, 1); applet->out_box = gtk_hbox_new(FALSE, 1); } else { applet->sum_box = gtk_vbox_new(FALSE, 0); applet->in_box = gtk_vbox_new(FALSE, 0); applet->out_box = gtk_vbox_new(FALSE, 0); } applet->labels_dont_shrink = FALSE; } else { applet->in_box = gtk_hbox_new(FALSE, 1); applet->out_box = gtk_hbox_new(FALSE, 1); if (size < 48) { applet->sum_box = gtk_hbox_new(FALSE, 2); applet->box = gtk_hbox_new(FALSE, 1); applet->labels_dont_shrink = TRUE; } else { applet->sum_box = gtk_vbox_new(FALSE, 0); applet->box = gtk_vbox_new(FALSE, 0); applet->labels_dont_shrink = !applet->show_sum; } } gtk_box_pack_start(GTK_BOX(applet->in_box), applet->in_pix, FALSE, FALSE, 0); gtk_box_pack_start(GTK_BOX(applet->in_box), applet->in_label, TRUE, TRUE, 0); gtk_box_pack_start(GTK_BOX(applet->out_box), applet->out_pix, FALSE, FALSE, 0); gtk_box_pack_start(GTK_BOX(applet->out_box), applet->out_label, TRUE, TRUE, 0); gtk_box_pack_start(GTK_BOX(applet->sum_box), applet->sum_label, TRUE, TRUE, 0); gtk_box_pack_start(GTK_BOX(applet->box), applet->pix_box, FALSE, FALSE, 0); gtk_widget_unref(applet->pix_box); gtk_widget_unref(applet->in_pix); gtk_widget_unref(applet->in_label); gtk_widget_unref(applet->out_pix); gtk_widget_unref(applet->out_label); gtk_widget_unref(applet->sum_label); if (applet->show_sum) { gtk_box_pack_start(GTK_BOX(applet->box), applet->sum_box, TRUE, TRUE, 0); } else { gtk_box_pack_start(GTK_BOX(applet->box), applet->in_box, TRUE, TRUE, 0); gtk_box_pack_start(GTK_BOX(applet->box), applet->out_box, TRUE, TRUE, 0); } gtk_widget_show_all(applet->box); gtk_container_add(GTK_CONTAINER(applet->applet), applet->box); } /* Change the background of the applet according to * the panel background. */ static void change_background_cb(PanelApplet *applet_widget, PanelAppletBackgroundType type, GdkColor *color, GdkPixmap *pixmap, NetspeedApplet *applet) { GtkStyle *style; GtkRcStyle *rc_style = gtk_rc_style_new (); gtk_widget_set_style (GTK_WIDGET (applet_widget), NULL); gtk_widget_modify_style (GTK_WIDGET (applet_widget), rc_style); gtk_rc_style_unref (rc_style); switch (type) { case PANEL_PIXMAP_BACKGROUND: style = gtk_style_copy (GTK_WIDGET (applet_widget)->style); if(style->bg_pixmap[GTK_STATE_NORMAL]) g_object_unref (style->bg_pixmap[GTK_STATE_NORMAL]); style->bg_pixmap[GTK_STATE_NORMAL] = g_object_ref (pixmap); gtk_widget_set_style (GTK_WIDGET(applet_widget), style); g_object_unref (style); break; case PANEL_COLOR_BACKGROUND: gtk_widget_modify_bg(GTK_WIDGET(applet_widget), GTK_STATE_NORMAL, color); break; case PANEL_NO_BACKGROUND: break; } } /* Change the icons according to the selected device */ static void change_icons(NetspeedApplet *applet) { GdkPixbuf *dev, *down; GdkPixbuf *in_arrow, *out_arrow; GtkIconTheme *icon_theme; icon_theme = gtk_icon_theme_get_default(); /* If the user wants a different icon then the eth0, we load it */ if (applet->change_icon) { dev = gtk_icon_theme_load_icon(icon_theme, dev_type_icon[applet->devinfo.type], 16, 0, NULL); } else { dev = gtk_icon_theme_load_icon(icon_theme, dev_type_icon[DEV_UNKNOWN], 16, 0, NULL); } /* We need a fallback */ if (dev == NULL) dev = gtk_icon_theme_load_icon(icon_theme, dev_type_icon[DEV_UNKNOWN], 16, 0, NULL); in_arrow = gtk_icon_theme_load_icon(icon_theme, IN_ICON, 16, 0, NULL); out_arrow = gtk_icon_theme_load_icon(icon_theme, OUT_ICON, 16, 0, NULL); /* Set the windowmanager icon for the applet */ gtk_window_set_default_icon_name(LOGO_ICON); gtk_image_set_from_pixbuf(GTK_IMAGE(applet->out_pix), out_arrow); gtk_image_set_from_pixbuf(GTK_IMAGE(applet->in_pix), in_arrow); gdk_pixbuf_unref(in_arrow); gdk_pixbuf_unref(out_arrow); if (applet->devinfo.running) { gtk_widget_show(applet->in_box); gtk_widget_show(applet->out_box); } else { GdkPixbuf *copy; gtk_widget_hide(applet->in_box); gtk_widget_hide(applet->out_box); /* We're not allowed to modify "dev" */ copy = gdk_pixbuf_copy(dev); down = gtk_icon_theme_load_icon(icon_theme, ERROR_ICON, 16, 0, NULL); gdk_pixbuf_composite(down, copy, 8, 8, 8, 8, 8, 8, 0.5, 0.5, GDK_INTERP_BILINEAR, 0xFF); g_object_unref(down); g_object_unref(dev); dev = copy; } gtk_image_set_from_pixbuf(GTK_IMAGE(applet->dev_pix), dev); g_object_unref(dev); } static void update_quality_icon(NetspeedApplet *applet) { unsigned int q; q = (applet->devinfo.qual); q /= 25; q = CLAMP(q, 0, 3); /* q out of range would crash when accessing qual_pixbufs[q] */ gtk_image_set_from_pixbuf (GTK_IMAGE(applet->qual_pix), applet->qual_pixbufs[q]); } static void init_quality_pixbufs(NetspeedApplet *applet) { GtkIconTheme *icon_theme; int i; icon_theme = gtk_icon_theme_get_default(); for (i = 0; i < 4; i++) { if (applet->qual_pixbufs[i]) g_object_unref(applet->qual_pixbufs[i]); applet->qual_pixbufs[i] = gtk_icon_theme_load_icon(icon_theme, wireless_quality_icon[i], 24, 0, NULL); } } static void icon_theme_changed_cb(GtkIconTheme *icon_theme, gpointer user_data) { NetspeedApplet *applet = (NetspeedApplet*)user_data; init_quality_pixbufs(user_data); if (applet->devinfo.type == DEV_WIRELESS && applet->devinfo.up) update_quality_icon(user_data); change_icons(user_data); } /* Converts a number of bytes into a human * readable string - in [M/k]bytes[/s] * The string has to be freed */ static char* bytes_to_string(double bytes, gboolean per_sec, gboolean bits) { const char *format; const char *unit; guint kilo; /* no really a kilo : a kilo or kibi */ if (bits) { bytes *= 8; kilo = 1000; } else kilo = 1024; if (bytes < kilo) { format = "%.0f %s"; if (per_sec) unit = bits ? N_("b/s") : N_("B/s"); else unit = bits ? N_("bits") : N_("bytes"); } else if (bytes < (kilo * kilo)) { format = (bytes < (100 * kilo)) ? "%.1f %s" : "%.0f %s"; bytes /= kilo; if (per_sec) unit = bits ? N_("kb/s") : N_("KiB/s"); else unit = bits ? N_("kb") : N_("KiB"); } else { format = "%.1f %s"; bytes /= kilo * kilo; if (per_sec) unit = bits ? N_("Mb/s") : N_("MiB/s"); else unit = bits ? N_("Mb") : N_("MiB"); } return g_strdup_printf(format, bytes, gettext(unit)); } /* Redraws the graph drawingarea * Some really black magic is going on in here ;-) */ static void redraw_graph(NetspeedApplet *applet) { GdkGC *gc; GdkColor color; GtkWidget *da = GTK_WIDGET(applet->drawingarea); GdkWindow *window, *real_window = da->window; GdkRectangle ra; GtkStateType state; GdkPoint in_points[GRAPH_VALUES], out_points[GRAPH_VALUES]; PangoLayout *layout; PangoRectangle logical_rect; char *text; int i, offset, w, h; double max_val; gc = gdk_gc_new (real_window); gdk_drawable_get_size(real_window, &w, &h); /* use doublebuffering to avoid flickering */ window = gdk_pixmap_new(real_window, w, h, -1); /* the graph hight should be: hight/2 <= applet->max_graph < hight */ for (max_val = 1; max_val < applet->max_graph; max_val *= 2) ; /* calculate the polygons (GdkPoint[]) for the graphs */ offset = 0; for (i = (applet->index_graph + 1) % GRAPH_VALUES; applet->in_graph[i] < 0; i = (i + 1) % GRAPH_VALUES) offset++; for (i = offset + 1; i < GRAPH_VALUES; i++) { int index = (applet->index_graph + i) % GRAPH_VALUES; out_points[i].x = in_points[i].x = ((w - 6) * i) / GRAPH_VALUES + 4; in_points[i].y = h - 6 - (int)((h - 8) * applet->in_graph[index] / max_val); out_points[i].y = h - 6 - (int)((h - 8) * applet->out_graph[index] / max_val); } in_points[offset].x = out_points[offset].x = ((w - 6) * offset) / GRAPH_VALUES + 4; in_points[offset].y = in_points[(offset + 1) % GRAPH_VALUES].y; out_points[offset].y = out_points[(offset + 1) % GRAPH_VALUES].y; /* draw the background */ gdk_gc_set_rgb_fg_color (gc, &da->style->black); gdk_draw_rectangle (window, gc, TRUE, 0, 0, w, h); color.red = 0x3a00; color.green = 0x8000; color.blue = 0x1400; gdk_gc_set_rgb_fg_color(gc, &color); gdk_draw_rectangle (window, gc, FALSE, 2, 2, w - 6, h - 6); for (i = 0; i < GRAPH_LINES; i++) { int y = 2 + ((h - 6) * i) / GRAPH_LINES; gdk_draw_line(window, gc, 2, y, w - 4, y); } /* draw the polygons */ gdk_gc_set_line_attributes(gc, 2, GDK_LINE_SOLID, GDK_CAP_ROUND, GDK_JOIN_ROUND); gdk_gc_set_rgb_fg_color(gc, &applet->in_color); gdk_draw_lines(window, gc, in_points + offset, GRAPH_VALUES - offset); gdk_gc_set_rgb_fg_color(gc, &applet->out_color); gdk_draw_lines(window, gc, out_points + offset, GRAPH_VALUES - offset); /* draw the 2 labels */ state = GTK_STATE_NORMAL; ra.x = 0; ra.y = 0; ra.width = w; ra.height = h; text = bytes_to_string(max_val, TRUE, applet->show_bits); add_markup_fgcolor(&text, "white"); layout = gtk_widget_create_pango_layout (da, NULL); pango_layout_set_markup(layout, text, -1); g_free (text); gtk_paint_layout(da->style, window, state, FALSE, &ra, da, "max_graph", 3, 2, layout); g_object_unref(G_OBJECT(layout)); text = bytes_to_string(0.0, TRUE, applet->show_bits); add_markup_fgcolor(&text, "white"); layout = gtk_widget_create_pango_layout (da, NULL); pango_layout_set_markup(layout, text, -1); pango_layout_get_pixel_extents (layout, NULL, &logical_rect); g_free (text); gtk_paint_layout(da->style, window, state, FALSE, &ra, da, "max_graph", 3, h - 4 - logical_rect.height, layout); g_object_unref(G_OBJECT(layout)); /* draw the pixmap to the real window */ gdk_draw_drawable(real_window, gc, window, 0, 0, 0, 0, w, h); g_object_unref(G_OBJECT(gc)); g_object_unref(G_OBJECT(window)); } static gboolean set_applet_devinfo(NetspeedApplet* applet, const char* iface) { DevInfo info; get_device_info(iface, &info); if (info.running) { free_device_info(&applet->devinfo); applet->devinfo = info; applet->device_has_changed = TRUE; return TRUE; } free_device_info(&info); return FALSE; } /* Find the first available device, that is running and != lo */ static void search_for_up_if(NetspeedApplet *applet) { const gchar *default_route; GList *devices, *tmp; DevInfo info; default_route = get_default_route(); if (default_route != NULL) { if (set_applet_devinfo(applet, default_route)) return; } devices = get_available_devices(); for (tmp = devices; tmp; tmp = g_list_next(tmp)) { if (is_dummy_device(tmp->data)) continue; if (set_applet_devinfo(applet, tmp->data)) break; } free_devices_list(devices); } /* Here happens the really interesting stuff */ static void update_applet(NetspeedApplet *applet) { guint64 indiff, outdiff; double inrate, outrate; char *inbytes, *outbytes; int i; DevInfo oldinfo; if (!applet) return; /* First we try to figure out if the device has changed */ oldinfo = applet->devinfo; get_device_info(oldinfo.name, &applet->devinfo); if (compare_device_info(&applet->devinfo, &oldinfo)) applet->device_has_changed = TRUE; free_device_info(&oldinfo); /* If the device has changed, reintialize stuff */ if (applet->device_has_changed) { change_icons(applet); if (applet->devinfo.type == DEV_WIRELESS && applet->devinfo.up) { gtk_widget_show(applet->qual_pix); } else { gtk_widget_hide(applet->qual_pix); } for (i = 0; i < OLD_VALUES; i++) { applet->in_old[i] = applet->devinfo.rx; applet->out_old[i] = applet->devinfo.tx; } for (i = 0; i < GRAPH_VALUES; i++) { applet->in_graph[i] = -1; applet->out_graph[i] = -1; } applet->max_graph = 0; applet->index_graph = 0; applet->device_has_changed = FALSE; } /* create the strings for the labels and tooltips */ if (applet->devinfo.running) { if (applet->devinfo.rx < applet->in_old[applet->index_old]) indiff = 0; else indiff = applet->devinfo.rx - applet->in_old[applet->index_old]; if (applet->devinfo.tx < applet->out_old[applet->index_old]) outdiff = 0; else outdiff = applet->devinfo.tx - applet->out_old[applet->index_old]; inrate = indiff * 1000.0; inrate /= (double)(applet->refresh_time * OLD_VALUES); outrate = outdiff * 1000.0; outrate /= (double)(applet->refresh_time * OLD_VALUES); applet->in_graph[applet->index_graph] = inrate; applet->out_graph[applet->index_graph] = outrate; applet->max_graph = MAX(inrate, applet->max_graph); applet->max_graph = MAX(outrate, applet->max_graph); applet->devinfo.rx_rate = bytes_to_string(inrate, TRUE, applet->show_bits); applet->devinfo.tx_rate = bytes_to_string(outrate, TRUE, applet->show_bits); applet->devinfo.sum_rate = bytes_to_string(inrate + outrate, TRUE, applet->show_bits); } else { applet->devinfo.rx_rate = g_strdup(""); applet->devinfo.tx_rate = g_strdup(""); applet->devinfo.sum_rate = g_strdup(""); applet->in_graph[applet->index_graph] = 0; applet->out_graph[applet->index_graph] = 0; } if (applet->devinfo.type == DEV_WIRELESS) { if (applet->devinfo.up) update_quality_icon(applet); if (applet->signalbar) { float quality; char *text; quality = applet->devinfo.qual / 100.0f; if (quality > 1.0) quality = 1.0; text = g_strdup_printf ("%d %%", applet->devinfo.qual); gtk_progress_bar_set_fraction (GTK_PROGRESS_BAR (applet->signalbar), quality); gtk_progress_bar_set_text (GTK_PROGRESS_BAR (applet->signalbar), text); g_free(text); } } update_tooltip(applet); /* Refresh the text of the labels and tooltip */ if (applet->show_sum) { gtk_label_set_markup(GTK_LABEL(applet->sum_label), applet->devinfo.sum_rate); } else { gtk_label_set_markup(GTK_LABEL(applet->in_label), applet->devinfo.rx_rate); gtk_label_set_markup(GTK_LABEL(applet->out_label), applet->devinfo.tx_rate); } /* Refresh the values of the Infodialog */ if (applet->inbytes_text) { inbytes = bytes_to_string((double)applet->devinfo.rx, FALSE, applet->show_bits); gtk_label_set_text(GTK_LABEL(applet->inbytes_text), inbytes); g_free(inbytes); } if (applet->outbytes_text) { outbytes = bytes_to_string((double)applet->devinfo.tx, FALSE, applet->show_bits); gtk_label_set_text(GTK_LABEL(applet->outbytes_text), outbytes); g_free(outbytes); } /* Redraw the graph of the Infodialog */ if (applet->drawingarea) redraw_graph(applet); /* Save old values... */ applet->in_old[applet->index_old] = applet->devinfo.rx; applet->out_old[applet->index_old] = applet->devinfo.tx; applet->index_old = (applet->index_old + 1) % OLD_VALUES; /* Move the graphindex. Check if we can scale down again */ applet->index_graph = (applet->index_graph + 1) % GRAPH_VALUES; if (applet->index_graph % 20 == 0) { double max = 0; for (i = 0; i < GRAPH_VALUES; i++) { max = MAX(max, applet->in_graph[i]); max = MAX(max, applet->out_graph[i]); } applet->max_graph = max; } /* Always follow the default route */ if (applet->auto_change_device) { gboolean change_device_now = !applet->devinfo.running; if (!change_device_now) { const gchar *default_route; default_route = get_default_route(); change_device_now = (default_route != NULL && strcmp(default_route, applet->devinfo.name)); } if (change_device_now) { search_for_up_if(applet); } } } static gboolean timeout_function(NetspeedApplet *applet) { if (!applet) return FALSE; if (!applet->timeout_id) return FALSE; update_applet(applet); return TRUE; } /* Display a section of netspeed help */ static void display_help (GtkWidget *dialog, const gchar *section) { GError *error = NULL; gboolean ret; char *uri; if (section) uri = g_strdup_printf ("ghelp:netspeed_applet?%s", section); else uri = g_strdup ("ghelp:netspeed_applet"); ret = open_uri (dialog, uri, &error); g_free (uri); if (ret == FALSE) { GtkWidget *error_dialog = gtk_message_dialog_new (NULL, GTK_DIALOG_MODAL, GTK_MESSAGE_ERROR, GTK_BUTTONS_OK, _("There was an error displaying help:\n%s"), error->message); g_signal_connect (error_dialog, "response", G_CALLBACK (gtk_widget_destroy), NULL); gtk_window_set_resizable (GTK_WINDOW (error_dialog), FALSE); gtk_window_set_screen (GTK_WINDOW (error_dialog), gtk_widget_get_screen (dialog)); gtk_widget_show (error_dialog); g_error_free (error); } } /* Opens gnome help application */ static void help_cb (BonoboUIComponent *uic, NetspeedApplet *ap, const gchar *verbname) { display_help (GTK_WIDGET (ap->applet), NULL); } enum { LINK_TYPE_EMAIL, LINK_TYPE_URL }; /* handle the links of the about dialog */ static void handle_links (GtkAboutDialog *about, const gchar *link, gpointer data) { gchar *new_link; GError *error = NULL; gboolean ret; GtkWidget *dialog; switch (GPOINTER_TO_INT (data)){ case LINK_TYPE_EMAIL: new_link = g_strdup_printf ("mailto:%s", link); break; case LINK_TYPE_URL: new_link = g_strdup (link); break; default: g_assert_not_reached (); } ret = open_uri (GTK_WIDGET (about), new_link, &error); if (ret == FALSE) { dialog = gtk_message_dialog_new (GTK_WINDOW (dialog), GTK_DIALOG_DESTROY_WITH_PARENT, GTK_MESSAGE_ERROR, GTK_BUTTONS_OK, _("Failed to show:\n%s"), new_link); gtk_dialog_run (GTK_DIALOG (dialog)); gtk_widget_destroy (dialog); g_error_free(error); } g_free (new_link); } /* Just the about window... If it's already open, just fokus it */ static void about_cb(BonoboUIComponent *uic, gpointer data, const gchar *verbname) { const char *authors[] = { "Jörgen Scheibengruber ", "Dennis Cranston ", "Pedro Villavicencio Garrido ", "Benoît Dejean ", NULL }; gtk_about_dialog_set_email_hook ((GtkAboutDialogActivateLinkFunc) handle_links, GINT_TO_POINTER (LINK_TYPE_EMAIL), NULL); gtk_about_dialog_set_url_hook ((GtkAboutDialogActivateLinkFunc) handle_links, GINT_TO_POINTER (LINK_TYPE_URL), NULL); gtk_show_about_dialog (NULL, "version", VERSION, "copyright", "Copyright 2002 - 2010 Jörgen Scheibengruber", "comments", _("A little applet that displays some information on the traffic on the specified network device"), "authors", authors, "documenters", NULL, "translator-credits", _("translator-credits"), "website", "http://www.gnome.org/projects/netspeed/", "website-label", _("Netspeed Website"), "logo-icon-name", LOGO_ICON, NULL); } /* this basically just retrieves the new devicestring * and then calls applet_device_change() and change_icons() */ static void device_change_cb(GtkComboBox *combo, NetspeedApplet *applet) { GList *devices; int i, active; g_assert(combo); devices = g_object_get_data(G_OBJECT(combo), "devices"); active = gtk_combo_box_get_active(combo); g_assert(active > -1); if (0 == active) { if (applet->auto_change_device) return; applet->auto_change_device = TRUE; } else { applet->auto_change_device = FALSE; for (i = 1; i < active; i++) { devices = g_list_next(devices); } if (g_str_equal(devices->data, applet->devinfo.name)) return; free_device_info(&applet->devinfo); get_device_info(devices->data, &applet->devinfo); } applet->device_has_changed = TRUE; update_applet(applet); } /* Handle preference dialog response event */ static void pref_response_cb (GtkDialog *dialog, gint id, gpointer data) { NetspeedApplet *applet = data; if(id == GTK_RESPONSE_HELP){ display_help (GTK_WIDGET (dialog), "netspeed_applet-settings"); return; } panel_applet_gconf_set_string(PANEL_APPLET(applet->applet), "device", applet->devinfo.name, NULL); panel_applet_gconf_set_bool(PANEL_APPLET(applet->applet), "show_sum", applet->show_sum, NULL); panel_applet_gconf_set_bool(PANEL_APPLET(applet->applet), "show_bits", applet->show_bits, NULL); panel_applet_gconf_set_bool(PANEL_APPLET(applet->applet), "change_icon", applet->change_icon, NULL); panel_applet_gconf_set_bool(PANEL_APPLET(applet->applet), "auto_change_device", applet->auto_change_device, NULL); panel_applet_gconf_set_bool(PANEL_APPLET(applet->applet), "have_settings", TRUE, NULL); gtk_widget_destroy(GTK_WIDGET(applet->settings)); applet->settings = NULL; } /* Called when the showsum checkbutton is toggled... */ static void showsum_change_cb(GtkToggleButton *togglebutton, NetspeedApplet *applet) { applet->show_sum = gtk_toggle_button_get_active(togglebutton); applet_change_size_or_orient(applet->applet, -1, (gpointer)applet); change_icons(applet); } /* Called when the showbits checkbutton is toggled... */ static void showbits_change_cb(GtkToggleButton *togglebutton, NetspeedApplet *applet) { applet->show_bits = gtk_toggle_button_get_active(togglebutton); } /* Called when the changeicon checkbutton is toggled... */ static void changeicon_change_cb(GtkToggleButton *togglebutton, NetspeedApplet *applet) { applet->change_icon = gtk_toggle_button_get_active(togglebutton); change_icons(applet); } /* Creates the settings dialog * After its been closed, take the new values and store * them in the gconf database */ static void settings_cb(BonoboUIComponent *uic, gpointer data, const gchar *verbname) { NetspeedApplet *applet = (NetspeedApplet*)data; GtkWidget *vbox; GtkWidget *hbox; GtkWidget *categories_vbox; GtkWidget *category_vbox; GtkWidget *controls_vbox; GtkWidget *category_header_label; GtkWidget *network_device_hbox; GtkWidget *network_device_label; GtkWidget *indent_label; GtkWidget *show_sum_checkbutton; GtkWidget *show_bits_checkbutton; GtkWidget *change_icon_checkbutton; GtkSizeGroup *category_label_size_group; GtkSizeGroup *category_units_size_group; gchar *header_str; GList *ptr, *devices; int i, active = -1; g_assert(applet); if (applet->settings) { gtk_window_present(GTK_WINDOW(applet->settings)); return; } category_label_size_group = gtk_size_group_new(GTK_SIZE_GROUP_HORIZONTAL); category_units_size_group = gtk_size_group_new(GTK_SIZE_GROUP_HORIZONTAL); applet->settings = GTK_DIALOG(gtk_dialog_new_with_buttons(_("Netspeed Preferences"), NULL, GTK_DIALOG_DESTROY_WITH_PARENT | GTK_DIALOG_NO_SEPARATOR, GTK_STOCK_HELP, GTK_RESPONSE_HELP, GTK_STOCK_CLOSE, GTK_RESPONSE_ACCEPT, NULL)); gtk_window_set_resizable(GTK_WINDOW(applet->settings), FALSE); gtk_window_set_screen(GTK_WINDOW(applet->settings), gtk_widget_get_screen(GTK_WIDGET(applet->settings))); gtk_dialog_set_default_response(GTK_DIALOG(applet->settings), GTK_RESPONSE_CLOSE); vbox = gtk_vbox_new(FALSE, 0); gtk_container_set_border_width(GTK_CONTAINER(vbox), 12); categories_vbox = gtk_vbox_new(FALSE, 18); gtk_box_pack_start(GTK_BOX (vbox), categories_vbox, TRUE, TRUE, 0); category_vbox = gtk_vbox_new(FALSE, 6); gtk_box_pack_start(GTK_BOX (categories_vbox), category_vbox, TRUE, TRUE, 0); header_str = g_strconcat("", _("General Settings"), "", NULL); category_header_label = gtk_label_new(header_str); gtk_label_set_use_markup(GTK_LABEL(category_header_label), TRUE); gtk_label_set_justify(GTK_LABEL(category_header_label), GTK_JUSTIFY_LEFT); gtk_misc_set_alignment(GTK_MISC (category_header_label), 0, 0.5); gtk_box_pack_start(GTK_BOX (category_vbox), category_header_label, FALSE, FALSE, 0); g_free(header_str); hbox = gtk_hbox_new(FALSE, 0); gtk_box_pack_start(GTK_BOX (category_vbox), hbox, TRUE, TRUE, 0); indent_label = gtk_label_new(" "); gtk_label_set_justify(GTK_LABEL (indent_label), GTK_JUSTIFY_LEFT); gtk_box_pack_start(GTK_BOX (hbox), indent_label, FALSE, FALSE, 0); controls_vbox = gtk_vbox_new(FALSE, 10); gtk_box_pack_start(GTK_BOX(hbox), controls_vbox, TRUE, TRUE, 0); network_device_hbox = gtk_hbox_new(FALSE, 6); gtk_box_pack_start(GTK_BOX(controls_vbox), network_device_hbox, TRUE, TRUE, 0); network_device_label = gtk_label_new_with_mnemonic(_("Network _device:")); gtk_label_set_justify(GTK_LABEL(network_device_label), GTK_JUSTIFY_LEFT); gtk_misc_set_alignment(GTK_MISC(network_device_label), 0.0f, 0.5f); gtk_size_group_add_widget(category_label_size_group, network_device_label); gtk_box_pack_start(GTK_BOX (network_device_hbox), network_device_label, FALSE, FALSE, 0); applet->network_device_combo = gtk_combo_box_new_text(); gtk_label_set_mnemonic_widget(GTK_LABEL(network_device_label), applet->network_device_combo); gtk_box_pack_start (GTK_BOX (network_device_hbox), applet->network_device_combo, TRUE, TRUE, 0); /* Default means device with default route set */ gtk_combo_box_append_text(GTK_COMBO_BOX(applet->network_device_combo), _("Default")); ptr = devices = get_available_devices(); for (i = 1; ptr; ptr = g_list_next(ptr)) { gtk_combo_box_append_text(GTK_COMBO_BOX(applet->network_device_combo), ptr->data); if (g_str_equal(ptr->data, applet->devinfo.name)) active = i; ++i; } if (active < 0 || applet->auto_change_device) { active = 0; } gtk_combo_box_set_active(GTK_COMBO_BOX(applet->network_device_combo), active); g_object_set_data_full(G_OBJECT(applet->network_device_combo), "devices", devices, (GDestroyNotify)free_devices_list); show_sum_checkbutton = gtk_check_button_new_with_mnemonic(_("Show _sum instead of in & out")); gtk_toggle_button_set_active(GTK_TOGGLE_BUTTON(show_sum_checkbutton), applet->show_sum); gtk_box_pack_start(GTK_BOX(controls_vbox), show_sum_checkbutton, FALSE, FALSE, 0); show_bits_checkbutton = gtk_check_button_new_with_mnemonic(_("Show _bits instead of bytes")); gtk_toggle_button_set_active(GTK_TOGGLE_BUTTON(show_bits_checkbutton), applet->show_bits); gtk_box_pack_start(GTK_BOX(controls_vbox), show_bits_checkbutton, FALSE, FALSE, 0); change_icon_checkbutton = gtk_check_button_new_with_mnemonic(_("Change _icon according to the selected device")); gtk_toggle_button_set_active(GTK_TOGGLE_BUTTON(change_icon_checkbutton), applet->change_icon); gtk_box_pack_start(GTK_BOX(controls_vbox), change_icon_checkbutton, FALSE, FALSE, 0); g_signal_connect(G_OBJECT (applet->network_device_combo), "changed", G_CALLBACK(device_change_cb), (gpointer)applet); g_signal_connect(G_OBJECT (show_sum_checkbutton), "toggled", G_CALLBACK(showsum_change_cb), (gpointer)applet); g_signal_connect(G_OBJECT (show_bits_checkbutton), "toggled", G_CALLBACK(showbits_change_cb), (gpointer)applet); g_signal_connect(G_OBJECT (change_icon_checkbutton), "toggled", G_CALLBACK(changeicon_change_cb), (gpointer)applet); g_signal_connect(G_OBJECT (applet->settings), "response", G_CALLBACK(pref_response_cb), (gpointer)applet); gtk_container_add(GTK_CONTAINER(applet->settings->vbox), vbox); gtk_widget_show_all(GTK_WIDGET(applet->settings)); } static gboolean da_expose_event(GtkWidget *widget, GdkEventExpose *event, gpointer data) { NetspeedApplet *applet = (NetspeedApplet*)data; redraw_graph(applet); return FALSE; } static void incolor_changed_cb (GtkColorButton *cb, gpointer data) { NetspeedApplet *applet = (NetspeedApplet*)data; gchar *color; GdkColor clr; gtk_color_button_get_color (cb, &clr); applet->in_color = clr; color = g_strdup_printf ("#%04x%04x%04x", clr.red, clr.green, clr.blue); panel_applet_gconf_set_string (PANEL_APPLET (applet->applet), "in_color", color, NULL); panel_applet_gconf_set_bool (PANEL_APPLET (applet->applet), "have_settings", TRUE, NULL); g_free (color); } static void outcolor_changed_cb (GtkColorButton *cb, gpointer data) { NetspeedApplet *applet = (NetspeedApplet*)data; gchar *color; GdkColor clr; gtk_color_button_get_color (cb, &clr); applet->out_color = clr; color = g_strdup_printf ("#%04x%04x%04x", clr.red, clr.green, clr.blue); panel_applet_gconf_set_string (PANEL_APPLET (applet->applet), "out_color", color, NULL); panel_applet_gconf_set_bool (PANEL_APPLET (applet->applet), "have_settings", TRUE, NULL); g_free (color); } /* Handle info dialog response event */ static void info_response_cb (GtkDialog *dialog, gint id, NetspeedApplet *applet) { if(id == GTK_RESPONSE_HELP){ display_help (GTK_WIDGET (dialog), "netspeed_applet-details"); return; } gtk_widget_destroy(GTK_WIDGET(applet->details)); applet->details = NULL; applet->inbytes_text = NULL; applet->outbytes_text = NULL; applet->drawingarea = NULL; applet->signalbar = NULL; } /* Creates the details dialog */ static void showinfo_cb(BonoboUIComponent *uic, gpointer data, const gchar *verbname) { NetspeedApplet *applet = (NetspeedApplet*)data; GtkWidget *box, *hbox; GtkWidget *table, *da_frame; GtkWidget *ip_label, *netmask_label; GtkWidget *hwaddr_label, *ptpip_label; GtkWidget *ip_text, *netmask_text; GtkWidget *hwaddr_text, *ptpip_text; GtkWidget *inbytes_label, *outbytes_label; GtkWidget *incolor_sel, *incolor_label; GtkWidget *outcolor_sel, *outcolor_label; char *title; g_assert(applet); if (applet->details) { gtk_window_present(GTK_WINDOW(applet->details)); return; } title = g_strdup_printf(_("Device Details for %s"), applet->devinfo.name); applet->details = GTK_DIALOG(gtk_dialog_new_with_buttons(title, NULL, GTK_DIALOG_DESTROY_WITH_PARENT | GTK_DIALOG_NO_SEPARATOR, GTK_STOCK_CLOSE, GTK_RESPONSE_ACCEPT, GTK_STOCK_HELP, GTK_RESPONSE_HELP, NULL)); g_free(title); gtk_dialog_set_default_response(GTK_DIALOG(applet->details), GTK_RESPONSE_CLOSE); box = gtk_vbox_new(FALSE, 10); gtk_container_set_border_width(GTK_CONTAINER(box), 12); table = gtk_table_new(4, 4, FALSE); gtk_table_set_row_spacings(GTK_TABLE(table), 10); gtk_table_set_col_spacings(GTK_TABLE(table), 15); da_frame = gtk_frame_new(NULL); gtk_frame_set_shadow_type(GTK_FRAME(da_frame), GTK_SHADOW_IN); applet->drawingarea = GTK_DRAWING_AREA(gtk_drawing_area_new()); gtk_widget_set_size_request(GTK_WIDGET(applet->drawingarea), -1, 180); gtk_container_add(GTK_CONTAINER(da_frame), GTK_WIDGET(applet->drawingarea)); hbox = gtk_hbox_new(FALSE, 5); incolor_label = gtk_label_new_with_mnemonic(_("_In graph color")); outcolor_label = gtk_label_new_with_mnemonic(_("_Out graph color")); incolor_sel = gtk_color_button_new (); outcolor_sel = gtk_color_button_new (); gtk_color_button_set_color (GTK_COLOR_BUTTON (incolor_sel), &applet->in_color); gtk_color_button_set_color (GTK_COLOR_BUTTON (outcolor_sel), &applet->out_color); gtk_label_set_mnemonic_widget(GTK_LABEL(incolor_label), incolor_sel); gtk_label_set_mnemonic_widget(GTK_LABEL(outcolor_label), outcolor_sel); gtk_box_pack_start(GTK_BOX(hbox), incolor_sel, FALSE, FALSE, 0); gtk_box_pack_start(GTK_BOX(hbox), incolor_label, FALSE, FALSE, 0); gtk_box_pack_start(GTK_BOX(hbox), outcolor_sel, FALSE, FALSE, 0); gtk_box_pack_start(GTK_BOX(hbox), outcolor_label, FALSE, FALSE, 0); ip_label = gtk_label_new(_("Internet Address:")); netmask_label = gtk_label_new(_("Netmask:")); hwaddr_label = gtk_label_new(_("Hardware Address:")); ptpip_label = gtk_label_new(_("P-t-P Address:")); inbytes_label = gtk_label_new(_("Bytes in:")); outbytes_label = gtk_label_new(_("Bytes out:")); ip_text = gtk_label_new(applet->devinfo.ip ? applet->devinfo.ip : _("none")); netmask_text = gtk_label_new(applet->devinfo.netmask ? applet->devinfo.netmask : _("none")); hwaddr_text = gtk_label_new(applet->devinfo.hwaddr ? applet->devinfo.hwaddr : _("none")); ptpip_text = gtk_label_new(applet->devinfo.ptpip ? applet->devinfo.ptpip : _("none")); applet->inbytes_text = gtk_label_new("0 byte"); applet->outbytes_text = gtk_label_new("0 byte"); gtk_label_set_selectable(GTK_LABEL(ip_text), TRUE); gtk_label_set_selectable(GTK_LABEL(netmask_text), TRUE); gtk_label_set_selectable(GTK_LABEL(hwaddr_text), TRUE); gtk_label_set_selectable(GTK_LABEL(ptpip_text), TRUE); gtk_misc_set_alignment(GTK_MISC(ip_label), 0.0f, 0.5f); gtk_misc_set_alignment(GTK_MISC(ip_text), 0.0f, 0.5f); gtk_misc_set_alignment(GTK_MISC(netmask_label), 0.0f, 0.5f); gtk_misc_set_alignment(GTK_MISC(netmask_text), 0.0f, 0.5f); gtk_misc_set_alignment(GTK_MISC(hwaddr_label), 0.0f, 0.5f); gtk_misc_set_alignment(GTK_MISC(hwaddr_text), 0.0f, 0.5f); gtk_misc_set_alignment(GTK_MISC(ptpip_label), 0.0f, 0.5f); gtk_misc_set_alignment(GTK_MISC(ptpip_text), 0.0f, 0.5f); gtk_misc_set_alignment(GTK_MISC(inbytes_label), 0.0f, 0.5f); gtk_misc_set_alignment(GTK_MISC(applet->inbytes_text), 0.0f, 0.5f); gtk_misc_set_alignment(GTK_MISC(outbytes_label), 0.0f, 0.5f); gtk_misc_set_alignment(GTK_MISC(applet->outbytes_text), 0.0f, 0.5f); gtk_table_attach_defaults(GTK_TABLE(table), ip_label, 0, 1, 0, 1); gtk_table_attach_defaults(GTK_TABLE(table), ip_text, 1, 2, 0, 1); gtk_table_attach_defaults(GTK_TABLE(table), netmask_label, 2, 3, 0, 1); gtk_table_attach_defaults(GTK_TABLE(table), netmask_text, 3, 4, 0, 1); gtk_table_attach_defaults(GTK_TABLE(table), hwaddr_label, 0, 1, 1, 2); gtk_table_attach_defaults(GTK_TABLE(table), hwaddr_text, 1, 2, 1, 2); gtk_table_attach_defaults(GTK_TABLE(table), ptpip_label, 2, 3, 1, 2); gtk_table_attach_defaults(GTK_TABLE(table), ptpip_text, 3, 4, 1, 2); gtk_table_attach_defaults(GTK_TABLE(table), inbytes_label, 0, 1, 2, 3); gtk_table_attach_defaults(GTK_TABLE(table), applet->inbytes_text, 1, 2, 2, 3); gtk_table_attach_defaults(GTK_TABLE(table), outbytes_label, 2, 3, 2, 3); gtk_table_attach_defaults(GTK_TABLE(table), applet->outbytes_text, 3, 4, 2, 3); /* check if we got an ipv6 address */ if (applet->devinfo.ipv6 && (strlen (applet->devinfo.ipv6) > 2)) { GtkWidget *ipv6_label, *ipv6_text; ipv6_label = gtk_label_new (_("IPv6 Address:")); ipv6_text = gtk_label_new (applet->devinfo.ipv6); gtk_label_set_selectable (GTK_LABEL (ipv6_text), TRUE); gtk_misc_set_alignment (GTK_MISC (ipv6_label), 0.0f, 0.5f); gtk_misc_set_alignment (GTK_MISC (ipv6_text), 0.0f, 0.5f); gtk_table_attach_defaults (GTK_TABLE (table), ipv6_label, 0, 1, 3, 4); gtk_table_attach_defaults (GTK_TABLE (table), ipv6_text, 1, 2, 3, 4); } if (applet->devinfo.type == DEV_WIRELESS) { GtkWidget *signal_label; GtkWidget *essid_label; GtkWidget *essid_text; float quality; char *text; /* _maybe_ we can add the encrypted icon between the essid and the signal bar. */ applet->signalbar = gtk_progress_bar_new (); quality = applet->devinfo.qual / 100.0f; if (quality > 1.0) quality = 1.0; text = g_strdup_printf ("%d %%", applet->devinfo.qual); gtk_progress_bar_set_fraction (GTK_PROGRESS_BAR (applet->signalbar), quality); gtk_progress_bar_set_text (GTK_PROGRESS_BAR (applet->signalbar), text); g_free(text); signal_label = gtk_label_new (_("Signal Strength:")); essid_label = gtk_label_new (_("ESSID:")); essid_text = gtk_label_new (applet->devinfo.essid); gtk_misc_set_alignment (GTK_MISC (signal_label), 0.0f, 0.5f); gtk_misc_set_alignment (GTK_MISC (essid_label), 0.0f, 0.5f); gtk_misc_set_alignment (GTK_MISC (essid_text), 0.0f, 0.5f); gtk_label_set_selectable (GTK_LABEL (essid_text), TRUE); gtk_table_attach_defaults (GTK_TABLE (table), signal_label, 2, 3, 4, 5); gtk_table_attach_defaults (GTK_TABLE (table), GTK_WIDGET (applet->signalbar), 3, 4, 4, 5); gtk_table_attach_defaults (GTK_TABLE (table), essid_label, 0, 3, 4, 5); gtk_table_attach_defaults (GTK_TABLE (table), essid_text, 1, 4, 4, 5); } g_signal_connect(G_OBJECT(applet->drawingarea), "expose_event", GTK_SIGNAL_FUNC(da_expose_event), (gpointer)applet); g_signal_connect(G_OBJECT(incolor_sel), "color_set", G_CALLBACK(incolor_changed_cb), (gpointer)applet); g_signal_connect(G_OBJECT(outcolor_sel), "color_set", G_CALLBACK(outcolor_changed_cb), (gpointer)applet); g_signal_connect(G_OBJECT(applet->details), "response", G_CALLBACK(info_response_cb), (gpointer)applet); gtk_box_pack_start(GTK_BOX(box), da_frame, TRUE, TRUE, 0); gtk_box_pack_start(GTK_BOX(box), hbox, FALSE, FALSE, 0); gtk_box_pack_start(GTK_BOX(box), table, FALSE, FALSE, 0); gtk_container_add(GTK_CONTAINER(applet->details->vbox), box); gtk_widget_show_all(GTK_WIDGET(applet->details)); } static const BonoboUIVerb netspeed_applet_menu_verbs [] = { BONOBO_UI_VERB("NetspeedAppletDetails", showinfo_cb), BONOBO_UI_VERB("NetspeedAppletProperties", settings_cb), BONOBO_UI_UNSAFE_VERB("NetspeedAppletHelp", help_cb), BONOBO_UI_VERB("NetspeedAppletAbout", about_cb), BONOBO_UI_VERB_END }; /* Block the size_request signal emit by the label if the * text changes. Only if the label wants to grow, we give * permission. This will eventually result in the maximal * size of the applet and prevents the icons and labels from * "jumping around" in the panel which looks uggly */ static void label_size_request_cb(GtkWidget *widget, GtkRequisition *requisition, NetspeedApplet *applet) { if (applet->labels_dont_shrink) { if (requisition->width <= applet->width) requisition->width = applet->width; else applet->width = requisition->width; } } static gboolean applet_button_press(GtkWidget *widget, GdkEventButton *event, NetspeedApplet *applet) { if (event->button == 1) { GError *error = NULL; if (applet->connect_dialog) { gtk_window_present(GTK_WINDOW(applet->connect_dialog)); return FALSE; } if (applet->up_cmd && applet->down_cmd) { const char *question; int response; if (applet->devinfo.up) { question = _("Do you want to disconnect %s now?"); } else { question = _("Do you want to connect %s now?"); } applet->connect_dialog = gtk_message_dialog_new(NULL, GTK_DIALOG_MODAL | GTK_DIALOG_DESTROY_WITH_PARENT, GTK_MESSAGE_QUESTION, GTK_BUTTONS_YES_NO, question, applet->devinfo.name); response = gtk_dialog_run(GTK_DIALOG(applet->connect_dialog)); gtk_widget_destroy (applet->connect_dialog); applet->connect_dialog = NULL; if (response == GTK_RESPONSE_YES) { GtkWidget *dialog; char *command; command = g_strdup_printf("%s %s", applet->devinfo.up ? applet->down_cmd : applet->up_cmd, applet->devinfo.name); if (!g_spawn_command_line_async(command, &error)) { dialog = gtk_message_dialog_new_with_markup(NULL, GTK_DIALOG_MODAL | GTK_DIALOG_DESTROY_WITH_PARENT, GTK_MESSAGE_ERROR, GTK_BUTTONS_OK, _("Running command %s failed\n%s"), command, error->message); gtk_dialog_run (GTK_DIALOG (dialog)); gtk_widget_destroy (dialog); g_error_free (error); } g_free(command); } } } return FALSE; } /* Frees the applet and all the data it contains * Removes the timeout_cb */ static void applet_destroy(PanelApplet *applet_widget, NetspeedApplet *applet) { GtkIconTheme *icon_theme; g_assert(applet); icon_theme = gtk_icon_theme_get_default(); g_object_disconnect(G_OBJECT(icon_theme), "changed", G_CALLBACK(icon_theme_changed_cb), (gpointer)applet, NULL); g_source_remove(applet->timeout_id); applet->timeout_id = 0; if (applet->up_cmd) g_free(applet->up_cmd); if (applet->down_cmd) g_free(applet->down_cmd); /* Should never be NULL */ free_device_info(&applet->devinfo); g_free(applet); return; } static void update_tooltip(NetspeedApplet* applet) { GString* tooltip; if (!applet->show_tooltip) return; tooltip = g_string_new(""); if (!applet->devinfo.running) g_string_printf(tooltip, _("%s is down"), applet->devinfo.name); else { if (applet->show_sum) { g_string_printf( tooltip, _("%s: %s\nin: %s out: %s"), applet->devinfo.name, applet->devinfo.ip ? applet->devinfo.ip : _("has no ip"), applet->devinfo.rx_rate, applet->devinfo.tx_rate ); } else { g_string_printf( tooltip, _("%s: %s\nsum: %s"), applet->devinfo.name, applet->devinfo.ip ? applet->devinfo.ip : _("has no ip"), applet->devinfo.sum_rate ); } if (applet->devinfo.type == DEV_WIRELESS) g_string_append_printf( tooltip, _("\nESSID: %s\nStrength: %d %%"), applet->devinfo.essid ? applet->devinfo.essid : _("unknown"), applet->devinfo.qual ); } gtk_widget_set_tooltip_text(GTK_WIDGET(applet->applet), tooltip->str); gtk_widget_trigger_tooltip_query(GTK_WIDGET(applet->applet)); g_string_free(tooltip, TRUE); } static gboolean netspeed_enter_cb(GtkWidget *widget, GdkEventCrossing *event, gpointer data) { NetspeedApplet *applet = data; applet->show_tooltip = TRUE; update_tooltip(applet); return TRUE; } static gboolean netspeed_leave_cb(GtkWidget *widget, GdkEventCrossing *event, gpointer data) { NetspeedApplet *applet = data; applet->show_tooltip = FALSE; return TRUE; } /* The "main" function of the applet */ static gboolean netspeed_applet_factory(PanelApplet *applet_widget, const gchar *iid, gpointer data) { NetspeedApplet *applet; int i; char* menu_string; GtkIconTheme *icon_theme; GtkWidget *spacer, *spacer_box; if (strcmp (iid, "OAFIID:GNOME_NetspeedApplet")) return FALSE; glibtop_init(); g_set_application_name (_("Netspeed")); icon_theme = gtk_icon_theme_get_default(); /* Alloc the applet. The "NULL-setting" is really redudant * but aren't we paranoid? */ applet = g_malloc0(sizeof(NetspeedApplet)); applet->applet = applet_widget; memset(&applet->devinfo, 0, sizeof(DevInfo)); applet->refresh_time = 1000.0; applet->show_sum = FALSE; applet->show_bits = FALSE; applet->change_icon = TRUE; applet->auto_change_device = TRUE; /* Set the default colors of the graph */ applet->in_color.red = 0xdf00; applet->in_color.green = 0x2800; applet->in_color.blue = 0x4700; applet->out_color.red = 0x3700; applet->out_color.green = 0x2800; applet->out_color.blue = 0xdf00; for (i = 0; i < GRAPH_VALUES; i++) { applet->in_graph[i] = -1; applet->out_graph[i] = -1; } /* Get stored settings from the gconf database */ if (panel_applet_gconf_get_bool(PANEL_APPLET(applet->applet), "have_settings", NULL)) { char *tmp = NULL; applet->show_sum = panel_applet_gconf_get_bool(applet_widget, "show_sum", NULL); applet->show_bits = panel_applet_gconf_get_bool(applet_widget, "show_bits", NULL); applet->change_icon = panel_applet_gconf_get_bool(applet_widget, "change_icon", NULL); applet->auto_change_device = panel_applet_gconf_get_bool(applet_widget, "auto_change_device", NULL); tmp = panel_applet_gconf_get_string(applet_widget, "device", NULL); if (tmp && strcmp(tmp, "")) { get_device_info(tmp, &applet->devinfo); g_free(tmp); } tmp = panel_applet_gconf_get_string(applet_widget, "up_command", NULL); if (tmp && strcmp(tmp, "")) { applet->up_cmd = g_strdup(tmp); g_free(tmp); } tmp = panel_applet_gconf_get_string(applet_widget, "down_command", NULL); if (tmp && strcmp(tmp, "")) { applet->down_cmd = g_strdup(tmp); g_free(tmp); } tmp = panel_applet_gconf_get_string(applet_widget, "in_color", NULL); if (tmp) { gdk_color_parse(tmp, &applet->in_color); g_free(tmp); } tmp = panel_applet_gconf_get_string(applet_widget, "out_color", NULL); if (tmp) { gdk_color_parse(tmp, &applet->out_color); g_free(tmp); } } if (!applet->devinfo.name) { GList *ptr, *devices = get_available_devices(); ptr = devices; while (ptr) { if (!g_str_equal(ptr->data, "lo")) { get_device_info(ptr->data, &applet->devinfo); break; } ptr = g_list_next(ptr); } free_devices_list(devices); } if (!applet->devinfo.name) get_device_info("lo", &applet->devinfo); applet->device_has_changed = TRUE; applet->in_label = gtk_label_new(""); applet->out_label = gtk_label_new(""); applet->sum_label = gtk_label_new(""); applet->in_pix = gtk_image_new(); applet->out_pix = gtk_image_new(); applet->dev_pix = gtk_image_new(); applet->qual_pix = gtk_image_new(); applet->pix_box = gtk_hbox_new(FALSE, 0); spacer = gtk_label_new(""); gtk_box_pack_start(GTK_BOX(applet->pix_box), spacer, TRUE, TRUE, 0); spacer = gtk_label_new(""); gtk_box_pack_end(GTK_BOX(applet->pix_box), spacer, TRUE, TRUE, 0); spacer_box = gtk_hbox_new(FALSE, 2); gtk_box_pack_start(GTK_BOX(applet->pix_box), spacer_box, FALSE, FALSE, 0); gtk_box_pack_start(GTK_BOX(spacer_box), applet->qual_pix, FALSE, FALSE, 0); gtk_box_pack_start(GTK_BOX(spacer_box), applet->dev_pix, FALSE, FALSE, 0); init_quality_pixbufs(applet); applet_change_size_or_orient(applet_widget, -1, (gpointer)applet); gtk_widget_show_all(GTK_WIDGET(applet_widget)); update_applet(applet); panel_applet_set_flags(applet_widget, PANEL_APPLET_EXPAND_MINOR); applet->timeout_id = g_timeout_add(applet->refresh_time, (GtkFunction)timeout_function, (gpointer)applet); g_signal_connect(G_OBJECT(applet_widget), "change_size", G_CALLBACK(applet_change_size_or_orient), (gpointer)applet); g_signal_connect(G_OBJECT(icon_theme), "changed", G_CALLBACK(icon_theme_changed_cb), (gpointer)applet); g_signal_connect(G_OBJECT(applet_widget), "change_orient", G_CALLBACK(applet_change_size_or_orient), (gpointer)applet); g_signal_connect(G_OBJECT(applet_widget), "change_background", G_CALLBACK(change_background_cb), (gpointer)applet); g_signal_connect(G_OBJECT(applet->in_label), "size_request", G_CALLBACK(label_size_request_cb), (gpointer)applet); g_signal_connect(G_OBJECT(applet->out_label), "size_request", G_CALLBACK(label_size_request_cb), (gpointer)applet); g_signal_connect(G_OBJECT(applet->sum_label), "size_request", G_CALLBACK(label_size_request_cb), (gpointer)applet); g_signal_connect(G_OBJECT(applet_widget), "destroy", G_CALLBACK(applet_destroy), (gpointer)applet); g_signal_connect(G_OBJECT(applet_widget), "button-press-event", G_CALLBACK(applet_button_press), (gpointer)applet); g_signal_connect(G_OBJECT(applet_widget), "leave_notify_event", G_CALLBACK(netspeed_leave_cb), (gpointer)applet); g_signal_connect(G_OBJECT(applet_widget), "enter_notify_event", G_CALLBACK(netspeed_enter_cb), (gpointer)applet); menu_string = g_strdup_printf(netspeed_applet_menu_xml, _("Device _Details"), _("_Preferences..."), _("_Help"), _("_About...")); panel_applet_setup_menu(applet_widget, menu_string, netspeed_applet_menu_verbs, (gpointer)applet); g_free(menu_string); return TRUE; } PANEL_APPLET_BONOBO_FACTORY("OAFIID:GNOME_NetspeedApplet_Factory", PANEL_TYPE_APPLET, PACKAGE, VERSION, (PanelAppletFactoryCallback)netspeed_applet_factory, NULL) netspeed_applet-0.16/depcomp0000755000175000017500000004426711402461244013125 00000000000000#! /bin/sh # depcomp - compile a program generating dependencies as side-effects scriptversion=2009-04-28.21; # UTC # Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009 Free # Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Originally written by Alexandre Oliva . case $1 in '') echo "$0: No command. Try \`$0 --help' for more information." 1>&2 exit 1; ;; -h | --h*) cat <<\EOF Usage: depcomp [--help] [--version] PROGRAM [ARGS] Run PROGRAMS ARGS to compile a file, generating dependencies as side-effects. Environment variables: depmode Dependency tracking mode. source Source file read by `PROGRAMS ARGS'. object Object file output by `PROGRAMS ARGS'. DEPDIR directory where to store dependencies. depfile Dependency file to output. tmpdepfile Temporary file to use when outputing dependencies. libtool Whether libtool is used (yes/no). Report bugs to . EOF exit $? ;; -v | --v*) echo "depcomp $scriptversion" exit $? ;; esac if test -z "$depmode" || test -z "$source" || test -z "$object"; then echo "depcomp: Variables source, object and depmode must be set" 1>&2 exit 1 fi # Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. depfile=${depfile-`echo "$object" | sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} rm -f "$tmpdepfile" # Some modes work just like other modes, but use different flags. We # parameterize here, but still list the modes in the big case below, # to make depend.m4 easier to write. Note that we *cannot* use a case # here, because this file can only contain one case statement. if test "$depmode" = hp; then # HP compiler uses -M and no extra arg. gccflag=-M depmode=gcc fi if test "$depmode" = dashXmstdout; then # This is just like dashmstdout with a different argument. dashmflag=-xM depmode=dashmstdout fi cygpath_u="cygpath -u -f -" if test "$depmode" = msvcmsys; then # This is just like msvisualcpp but w/o cygpath translation. # Just convert the backslash-escaped backslashes to single forward # slashes to satisfy depend.m4 cygpath_u="sed s,\\\\\\\\,/,g" depmode=msvisualcpp fi case "$depmode" in gcc3) ## gcc 3 implements dependency tracking that does exactly what ## we want. Yay! Note: for some reason libtool 1.4 doesn't like ## it if -MD -MP comes after the -MF stuff. Hmm. ## Unfortunately, FreeBSD c89 acceptance of flags depends upon ## the command line argument order; so add the flags where they ## appear in depend2.am. Note that the slowdown incurred here ## affects only configure: in makefiles, %FASTDEP% shortcuts this. for arg do case $arg in -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;; *) set fnord "$@" "$arg" ;; esac shift # fnord shift # $arg done "$@" stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi mv "$tmpdepfile" "$depfile" ;; gcc) ## There are various ways to get dependency output from gcc. Here's ## why we pick this rather obscure method: ## - Don't want to use -MD because we'd like the dependencies to end ## up in a subdir. Having to rename by hand is ugly. ## (We might end up doing this anyway to support other compilers.) ## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like ## -MM, not -M (despite what the docs say). ## - Using -M directly means running the compiler twice (even worse ## than renaming). if test -z "$gccflag"; then gccflag=-MD, fi "$@" -Wp,"$gccflag$tmpdepfile" stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" echo "$object : \\" > "$depfile" alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz ## The second -e expression handles DOS-style file names with drive letters. sed -e 's/^[^:]*: / /' \ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" ## This next piece of magic avoids the `deleted header file' problem. ## The problem is that when a header file which appears in a .P file ## is deleted, the dependency causes make to die (because there is ## typically no way to rebuild the header). We avoid this by adding ## dummy dependencies for each header file. Too bad gcc doesn't do ## this for us directly. tr ' ' ' ' < "$tmpdepfile" | ## Some versions of gcc put a space before the `:'. On the theory ## that the space means something, we add a space to the output as ## well. ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; hp) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; sgi) if test "$libtool" = yes; then "$@" "-Wp,-MDupdate,$tmpdepfile" else "$@" -MDupdate "$tmpdepfile" fi stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files echo "$object : \\" > "$depfile" # Clip off the initial element (the dependent). Don't try to be # clever and replace this with sed code, as IRIX sed won't handle # lines with more than a fixed number of characters (4096 in # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; # the IRIX cc adds comments like `#:fec' to the end of the # dependency line. tr ' ' ' ' < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ tr ' ' ' ' >> "$depfile" echo >> "$depfile" # The second pass generates a dummy entry for each header file. tr ' ' ' ' < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ >> "$depfile" else # The sourcefile does not contain any dependencies, so just # store a dummy comment line, to avoid errors with the Makefile # "include basename.Plo" scheme. echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" ;; aix) # The C for AIX Compiler uses -M and outputs the dependencies # in a .u file. In older versions, this file always lives in the # current directory. Also, the AIX compiler puts `$object:' at the # start of each line; $object doesn't have directory information. # Version 6 uses the directory in both cases. dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` test "x$dir" = "x$object" && dir= base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` if test "$libtool" = yes; then tmpdepfile1=$dir$base.u tmpdepfile2=$base.u tmpdepfile3=$dir.libs/$base.u "$@" -Wc,-M else tmpdepfile1=$dir$base.u tmpdepfile2=$dir$base.u tmpdepfile3=$dir$base.u "$@" -M fi stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" do test -f "$tmpdepfile" && break done if test -f "$tmpdepfile"; then # Each line is of the form `foo.o: dependent.h'. # Do two passes, one to just change these to # `$object: dependent.h' and one to simply `dependent.h:'. sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" # That's a tab and a space in the []. sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" else # The sourcefile does not contain any dependencies, so just # store a dummy comment line, to avoid errors with the Makefile # "include basename.Plo" scheme. echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" ;; icc) # Intel's C compiler understands `-MD -MF file'. However on # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c # ICC 7.0 will fill foo.d with something like # foo.o: sub/foo.c # foo.o: sub/foo.h # which is wrong. We want: # sub/foo.o: sub/foo.c # sub/foo.o: sub/foo.h # sub/foo.c: # sub/foo.h: # ICC 7.1 will output # foo.o: sub/foo.c sub/foo.h # and will wrap long lines using \ : # foo.o: sub/foo.c ... \ # sub/foo.h ... \ # ... "$@" -MD -MF "$tmpdepfile" stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" # Each line is of the form `foo.o: dependent.h', # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. # Do two passes, one to just change these to # `$object: dependent.h' and one to simply `dependent.h:'. sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" # Some versions of the HPUX 10.20 sed can't process this invocation # correctly. Breaking it into two sed invocations is a workaround. sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; hp2) # The "hp" stanza above does not work with aCC (C++) and HP's ia64 # compilers, which have integrated preprocessors. The correct option # to use with these is +Maked; it writes dependencies to a file named # 'foo.d', which lands next to the object file, wherever that # happens to be. # Much of this is similar to the tru64 case; see comments there. dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` test "x$dir" = "x$object" && dir= base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` if test "$libtool" = yes; then tmpdepfile1=$dir$base.d tmpdepfile2=$dir.libs/$base.d "$@" -Wc,+Maked else tmpdepfile1=$dir$base.d tmpdepfile2=$dir$base.d "$@" +Maked fi stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile1" "$tmpdepfile2" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" do test -f "$tmpdepfile" && break done if test -f "$tmpdepfile"; then sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile" # Add `dependent.h:' lines. sed -ne '2,${ s/^ *// s/ \\*$// s/$/:/ p }' "$tmpdepfile" >> "$depfile" else echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" "$tmpdepfile2" ;; tru64) # The Tru64 compiler uses -MD to generate dependencies as a side # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put # dependencies in `foo.d' instead, so we check for that too. # Subdirectories are respected. dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` test "x$dir" = "x$object" && dir= base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` if test "$libtool" = yes; then # With Tru64 cc, shared objects can also be used to make a # static library. This mechanism is used in libtool 1.4 series to # handle both shared and static libraries in a single compilation. # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d. # # With libtool 1.5 this exception was removed, and libtool now # generates 2 separate objects for the 2 libraries. These two # compilations output dependencies in $dir.libs/$base.o.d and # in $dir$base.o.d. We have to check for both files, because # one of the two compilations can be disabled. We should prefer # $dir$base.o.d over $dir.libs/$base.o.d because the latter is # automatically cleaned when .libs/ is deleted, while ignoring # the former would cause a distcleancheck panic. tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4 tmpdepfile2=$dir$base.o.d # libtool 1.5 tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5 tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504 "$@" -Wc,-MD else tmpdepfile1=$dir$base.o.d tmpdepfile2=$dir$base.d tmpdepfile3=$dir$base.d tmpdepfile4=$dir$base.d "$@" -MD fi stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" do test -f "$tmpdepfile" && break done if test -f "$tmpdepfile"; then sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" # That's a tab and a space in the []. sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" else echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" ;; #nosideeffect) # This comment above is used by automake to tell side-effect # dependency tracking mechanisms from slower ones. dashmstdout) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout, regardless of -o. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi # Remove `-o $object'. IFS=" " for arg do case $arg in -o) shift ;; $object) shift ;; *) set fnord "$@" "$arg" shift # fnord shift # $arg ;; esac done test -z "$dashmflag" && dashmflag=-M # Require at least two characters before searching for `:' # in the target name. This is to cope with DOS-style filenames: # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise. "$@" $dashmflag | sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" rm -f "$depfile" cat < "$tmpdepfile" > "$depfile" tr ' ' ' ' < "$tmpdepfile" | \ ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; dashXmstdout) # This case only exists to satisfy depend.m4. It is never actually # run, as this mode is specially recognized in the preamble. exit 1 ;; makedepend) "$@" || exit $? # Remove any Libtool call if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi # X makedepend shift cleared=no eat=no for arg do case $cleared in no) set ""; shift cleared=yes ;; esac if test $eat = yes; then eat=no continue fi case "$arg" in -D*|-I*) set fnord "$@" "$arg"; shift ;; # Strip any option that makedepend may not understand. Remove # the object too, otherwise makedepend will parse it as a source file. -arch) eat=yes ;; -*|$object) ;; *) set fnord "$@" "$arg"; shift ;; esac done obj_suffix=`echo "$object" | sed 's/^.*\././'` touch "$tmpdepfile" ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" rm -f "$depfile" cat < "$tmpdepfile" > "$depfile" sed '1,2d' "$tmpdepfile" | tr ' ' ' ' | \ ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" "$tmpdepfile".bak ;; cpp) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi # Remove `-o $object'. IFS=" " for arg do case $arg in -o) shift ;; $object) shift ;; *) set fnord "$@" "$arg" shift # fnord shift # $arg ;; esac done "$@" -E | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | sed '$ s: \\$::' > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" cat < "$tmpdepfile" >> "$depfile" sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; msvisualcpp) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi IFS=" " for arg do case "$arg" in -o) shift ;; $object) shift ;; "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") set fnord "$@" shift shift ;; *) set fnord "$@" "$arg" shift shift ;; esac done "$@" -E 2>/dev/null | sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" echo " " >> "$depfile" sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile" rm -f "$tmpdepfile" ;; msvcmsys) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; none) exec "$@" ;; *) echo "Unknown depmode $depmode" 1>&2 exit 1 ;; esac exit 0 # Local Variables: # mode: shell-script # sh-indentation: 2 # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC" # time-stamp-end: "; # UTC" # End: netspeed_applet-0.16/config.sub0000755000175000017500000010242511402461242013520 00000000000000#! /bin/sh # Configuration validation subroutine script. # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, # 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 # Free Software Foundation, Inc. timestamp='2009-06-11' # This file is (in principle) common to ALL GNU software. # The presence of a machine in this file suggests that SOME GNU software # can handle that machine. It does not imply ALL GNU software can. # # This file is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA # 02110-1301, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Please send patches to . Submit a context # diff and a properly formatted ChangeLog entry. # # Configuration subroutine to validate and canonicalize a configuration type. # Supply the specified configuration type as an argument. # If it is invalid, we print an error message on stderr and exit with code 1. # Otherwise, we print the canonical config type on stdout and succeed. # This file is supposed to be the same for all GNU packages # and recognize all the CPU types, system types and aliases # that are meaningful with *any* GNU software. # Each package is responsible for reporting which valid configurations # it does not support. The user should be able to distinguish # a failure to support a valid configuration from a meaningless # configuration. # The goal of this file is to map all the various variations of a given # machine specification into a single specification in the form: # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM # or in some cases, the newer four-part form: # CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM # It is wrong to echo any other type of specification. me=`echo "$0" | sed -e 's,.*/,,'` usage="\ Usage: $0 [OPTION] CPU-MFR-OPSYS $0 [OPTION] ALIAS Canonicalize a configuration name. Operation modes: -h, --help print this help, then exit -t, --time-stamp print date of last modification, then exit -v, --version print version number, then exit Report bugs and patches to ." version="\ GNU config.sub ($timestamp) Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." help=" Try \`$me --help' for more information." # Parse command line while test $# -gt 0 ; do case $1 in --time-stamp | --time* | -t ) echo "$timestamp" ; exit ;; --version | -v ) echo "$version" ; exit ;; --help | --h* | -h ) echo "$usage"; exit ;; -- ) # Stop option processing shift; break ;; - ) # Use stdin as input. break ;; -* ) echo "$me: invalid option $1$help" exit 1 ;; *local*) # First pass through any local machine types. echo $1 exit ;; * ) break ;; esac done case $# in 0) echo "$me: missing argument$help" >&2 exit 1;; 1) ;; *) echo "$me: too many arguments$help" >&2 exit 1;; esac # Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). # Here we must recognize all the valid KERNEL-OS combinations. maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` case $maybe_os in nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \ uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \ kopensolaris*-gnu* | \ storm-chaos* | os2-emx* | rtmk-nova*) os=-$maybe_os basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` ;; *) basic_machine=`echo $1 | sed 's/-[^-]*$//'` if [ $basic_machine != $1 ] then os=`echo $1 | sed 's/.*-/-/'` else os=; fi ;; esac ### Let's recognize common machines as not being operating systems so ### that things like config.sub decstation-3100 work. We also ### recognize some manufacturers as not being operating systems, so we ### can provide default operating systems below. case $os in -sun*os*) # Prevent following clause from handling this invalid input. ;; -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ -apple | -axis | -knuth | -cray) os= basic_machine=$1 ;; -bluegene*) os=-cnk ;; -sim | -cisco | -oki | -wec | -winbond) os= basic_machine=$1 ;; -scout) ;; -wrs) os=-vxworks basic_machine=$1 ;; -chorusos*) os=-chorusos basic_machine=$1 ;; -chorusrdb) os=-chorusrdb basic_machine=$1 ;; -hiux*) os=-hiuxwe2 ;; -sco6) os=-sco5v6 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco5) os=-sco3.2v5 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco4) os=-sco3.2v4 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco3.2.[4-9]*) os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco3.2v[4-9]*) # Don't forget version if it is 3.2v4 or newer. basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco5v6*) # Don't forget version if it is 3.2v4 or newer. basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco*) os=-sco3.2v2 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -udk*) basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -isc) os=-isc2.2 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -clix*) basic_machine=clipper-intergraph ;; -isc*) basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -lynx*) os=-lynxos ;; -ptx*) basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` ;; -windowsnt*) os=`echo $os | sed -e 's/windowsnt/winnt/'` ;; -psos*) os=-psos ;; -mint | -mint[0-9]*) basic_machine=m68k-atari os=-mint ;; esac # Decode aliases for certain CPU-COMPANY combinations. case $basic_machine in # Recognize the basic CPU types without company name. # Some are omitted here because they have special meanings below. 1750a | 580 \ | a29k \ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ | am33_2.0 \ | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \ | bfin \ | c4x | clipper \ | d10v | d30v | dlx | dsp16xx \ | fido | fr30 | frv \ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ | i370 | i860 | i960 | ia64 \ | ip2k | iq2000 \ | lm32 \ | m32c | m32r | m32rle | m68000 | m68k | m88k \ | maxq | mb | microblaze | mcore | mep | metag \ | mips | mipsbe | mipseb | mipsel | mipsle \ | mips16 \ | mips64 | mips64el \ | mips64octeon | mips64octeonel \ | mips64orion | mips64orionel \ | mips64r5900 | mips64r5900el \ | mips64vr | mips64vrel \ | mips64vr4100 | mips64vr4100el \ | mips64vr4300 | mips64vr4300el \ | mips64vr5000 | mips64vr5000el \ | mips64vr5900 | mips64vr5900el \ | mipsisa32 | mipsisa32el \ | mipsisa32r2 | mipsisa32r2el \ | mipsisa64 | mipsisa64el \ | mipsisa64r2 | mipsisa64r2el \ | mipsisa64sb1 | mipsisa64sb1el \ | mipsisa64sr71k | mipsisa64sr71kel \ | mipstx39 | mipstx39el \ | mn10200 | mn10300 \ | moxie \ | mt \ | msp430 \ | nios | nios2 \ | ns16k | ns32k \ | or32 \ | pdp10 | pdp11 | pj | pjl \ | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ | pyramid \ | score \ | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ | sh64 | sh64le \ | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ | spu | strongarm \ | tahoe | thumb | tic4x | tic80 | tron \ | v850 | v850e \ | we32k \ | x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \ | z8k | z80) basic_machine=$basic_machine-unknown ;; m6811 | m68hc11 | m6812 | m68hc12) # Motorola 68HC11/12. basic_machine=$basic_machine-unknown os=-none ;; m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) ;; ms1) basic_machine=mt-unknown ;; # We use `pc' rather than `unknown' # because (1) that's what they normally are, and # (2) the word "unknown" tends to confuse beginning users. i*86 | x86_64) basic_machine=$basic_machine-pc ;; # Object if more than one company name word. *-*-*) echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 exit 1 ;; # Recognize the basic CPU types with company name. 580-* \ | a29k-* \ | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ | avr-* | avr32-* \ | bfin-* | bs2000-* \ | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \ | clipper-* | craynv-* | cydra-* \ | d10v-* | d30v-* | dlx-* \ | elxsi-* \ | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ | h8300-* | h8500-* \ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ | i*86-* | i860-* | i960-* | ia64-* \ | ip2k-* | iq2000-* \ | lm32-* \ | m32c-* | m32r-* | m32rle-* \ | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ | m88110-* | m88k-* | maxq-* | mcore-* | metag-* \ | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ | mips16-* \ | mips64-* | mips64el-* \ | mips64octeon-* | mips64octeonel-* \ | mips64orion-* | mips64orionel-* \ | mips64r5900-* | mips64r5900el-* \ | mips64vr-* | mips64vrel-* \ | mips64vr4100-* | mips64vr4100el-* \ | mips64vr4300-* | mips64vr4300el-* \ | mips64vr5000-* | mips64vr5000el-* \ | mips64vr5900-* | mips64vr5900el-* \ | mipsisa32-* | mipsisa32el-* \ | mipsisa32r2-* | mipsisa32r2el-* \ | mipsisa64-* | mipsisa64el-* \ | mipsisa64r2-* | mipsisa64r2el-* \ | mipsisa64sb1-* | mipsisa64sb1el-* \ | mipsisa64sr71k-* | mipsisa64sr71kel-* \ | mipstx39-* | mipstx39el-* \ | mmix-* \ | mt-* \ | msp430-* \ | nios-* | nios2-* \ | none-* | np1-* | ns16k-* | ns32k-* \ | orion-* \ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ | pyramid-* \ | romp-* | rs6000-* \ | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ | sparclite-* \ | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \ | tahoe-* | thumb-* \ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* | tile-* \ | tron-* \ | v850-* | v850e-* | vax-* \ | we32k-* \ | x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \ | xstormy16-* | xtensa*-* \ | ymp-* \ | z8k-* | z80-*) ;; # Recognize the basic CPU types without company name, with glob match. xtensa*) basic_machine=$basic_machine-unknown ;; # Recognize the various machine names and aliases which stand # for a CPU type and a company and sometimes even an OS. 386bsd) basic_machine=i386-unknown os=-bsd ;; 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) basic_machine=m68000-att ;; 3b*) basic_machine=we32k-att ;; a29khif) basic_machine=a29k-amd os=-udi ;; abacus) basic_machine=abacus-unknown ;; adobe68k) basic_machine=m68010-adobe os=-scout ;; alliant | fx80) basic_machine=fx80-alliant ;; altos | altos3068) basic_machine=m68k-altos ;; am29k) basic_machine=a29k-none os=-bsd ;; amd64) basic_machine=x86_64-pc ;; amd64-*) basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` ;; amdahl) basic_machine=580-amdahl os=-sysv ;; amiga | amiga-*) basic_machine=m68k-unknown ;; amigaos | amigados) basic_machine=m68k-unknown os=-amigaos ;; amigaunix | amix) basic_machine=m68k-unknown os=-sysv4 ;; apollo68) basic_machine=m68k-apollo os=-sysv ;; apollo68bsd) basic_machine=m68k-apollo os=-bsd ;; aros) basic_machine=i386-pc os=-aros ;; aux) basic_machine=m68k-apple os=-aux ;; balance) basic_machine=ns32k-sequent os=-dynix ;; blackfin) basic_machine=bfin-unknown os=-linux ;; blackfin-*) basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'` os=-linux ;; bluegene*) basic_machine=powerpc-ibm os=-cnk ;; c90) basic_machine=c90-cray os=-unicos ;; cegcc) basic_machine=arm-unknown os=-cegcc ;; convex-c1) basic_machine=c1-convex os=-bsd ;; convex-c2) basic_machine=c2-convex os=-bsd ;; convex-c32) basic_machine=c32-convex os=-bsd ;; convex-c34) basic_machine=c34-convex os=-bsd ;; convex-c38) basic_machine=c38-convex os=-bsd ;; cray | j90) basic_machine=j90-cray os=-unicos ;; craynv) basic_machine=craynv-cray os=-unicosmp ;; cr16) basic_machine=cr16-unknown os=-elf ;; crds | unos) basic_machine=m68k-crds ;; crisv32 | crisv32-* | etraxfs*) basic_machine=crisv32-axis ;; cris | cris-* | etrax*) basic_machine=cris-axis ;; crx) basic_machine=crx-unknown os=-elf ;; da30 | da30-*) basic_machine=m68k-da30 ;; decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) basic_machine=mips-dec ;; decsystem10* | dec10*) basic_machine=pdp10-dec os=-tops10 ;; decsystem20* | dec20*) basic_machine=pdp10-dec os=-tops20 ;; delta | 3300 | motorola-3300 | motorola-delta \ | 3300-motorola | delta-motorola) basic_machine=m68k-motorola ;; delta88) basic_machine=m88k-motorola os=-sysv3 ;; dicos) basic_machine=i686-pc os=-dicos ;; djgpp) basic_machine=i586-pc os=-msdosdjgpp ;; dpx20 | dpx20-*) basic_machine=rs6000-bull os=-bosx ;; dpx2* | dpx2*-bull) basic_machine=m68k-bull os=-sysv3 ;; ebmon29k) basic_machine=a29k-amd os=-ebmon ;; elxsi) basic_machine=elxsi-elxsi os=-bsd ;; encore | umax | mmax) basic_machine=ns32k-encore ;; es1800 | OSE68k | ose68k | ose | OSE) basic_machine=m68k-ericsson os=-ose ;; fx2800) basic_machine=i860-alliant ;; genix) basic_machine=ns32k-ns ;; gmicro) basic_machine=tron-gmicro os=-sysv ;; go32) basic_machine=i386-pc os=-go32 ;; h3050r* | hiux*) basic_machine=hppa1.1-hitachi os=-hiuxwe2 ;; h8300hms) basic_machine=h8300-hitachi os=-hms ;; h8300xray) basic_machine=h8300-hitachi os=-xray ;; h8500hms) basic_machine=h8500-hitachi os=-hms ;; harris) basic_machine=m88k-harris os=-sysv3 ;; hp300-*) basic_machine=m68k-hp ;; hp300bsd) basic_machine=m68k-hp os=-bsd ;; hp300hpux) basic_machine=m68k-hp os=-hpux ;; hp3k9[0-9][0-9] | hp9[0-9][0-9]) basic_machine=hppa1.0-hp ;; hp9k2[0-9][0-9] | hp9k31[0-9]) basic_machine=m68000-hp ;; hp9k3[2-9][0-9]) basic_machine=m68k-hp ;; hp9k6[0-9][0-9] | hp6[0-9][0-9]) basic_machine=hppa1.0-hp ;; hp9k7[0-79][0-9] | hp7[0-79][0-9]) basic_machine=hppa1.1-hp ;; hp9k78[0-9] | hp78[0-9]) # FIXME: really hppa2.0-hp basic_machine=hppa1.1-hp ;; hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) # FIXME: really hppa2.0-hp basic_machine=hppa1.1-hp ;; hp9k8[0-9][13679] | hp8[0-9][13679]) basic_machine=hppa1.1-hp ;; hp9k8[0-9][0-9] | hp8[0-9][0-9]) basic_machine=hppa1.0-hp ;; hppa-next) os=-nextstep3 ;; hppaosf) basic_machine=hppa1.1-hp os=-osf ;; hppro) basic_machine=hppa1.1-hp os=-proelf ;; i370-ibm* | ibm*) basic_machine=i370-ibm ;; # I'm not sure what "Sysv32" means. Should this be sysv3.2? i*86v32) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv32 ;; i*86v4*) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv4 ;; i*86v) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv ;; i*86sol2) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-solaris2 ;; i386mach) basic_machine=i386-mach os=-mach ;; i386-vsta | vsta) basic_machine=i386-unknown os=-vsta ;; iris | iris4d) basic_machine=mips-sgi case $os in -irix*) ;; *) os=-irix4 ;; esac ;; isi68 | isi) basic_machine=m68k-isi os=-sysv ;; m68knommu) basic_machine=m68k-unknown os=-linux ;; m68knommu-*) basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'` os=-linux ;; m88k-omron*) basic_machine=m88k-omron ;; magnum | m3230) basic_machine=mips-mips os=-sysv ;; merlin) basic_machine=ns32k-utek os=-sysv ;; mingw32) basic_machine=i386-pc os=-mingw32 ;; mingw32ce) basic_machine=arm-unknown os=-mingw32ce ;; miniframe) basic_machine=m68000-convergent ;; *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) basic_machine=m68k-atari os=-mint ;; mips3*-*) basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` ;; mips3*) basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown ;; monitor) basic_machine=m68k-rom68k os=-coff ;; morphos) basic_machine=powerpc-unknown os=-morphos ;; msdos) basic_machine=i386-pc os=-msdos ;; ms1-*) basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'` ;; mvs) basic_machine=i370-ibm os=-mvs ;; ncr3000) basic_machine=i486-ncr os=-sysv4 ;; netbsd386) basic_machine=i386-unknown os=-netbsd ;; netwinder) basic_machine=armv4l-rebel os=-linux ;; news | news700 | news800 | news900) basic_machine=m68k-sony os=-newsos ;; news1000) basic_machine=m68030-sony os=-newsos ;; news-3600 | risc-news) basic_machine=mips-sony os=-newsos ;; necv70) basic_machine=v70-nec os=-sysv ;; next | m*-next ) basic_machine=m68k-next case $os in -nextstep* ) ;; -ns2*) os=-nextstep2 ;; *) os=-nextstep3 ;; esac ;; nh3000) basic_machine=m68k-harris os=-cxux ;; nh[45]000) basic_machine=m88k-harris os=-cxux ;; nindy960) basic_machine=i960-intel os=-nindy ;; mon960) basic_machine=i960-intel os=-mon960 ;; nonstopux) basic_machine=mips-compaq os=-nonstopux ;; np1) basic_machine=np1-gould ;; nsr-tandem) basic_machine=nsr-tandem ;; op50n-* | op60c-*) basic_machine=hppa1.1-oki os=-proelf ;; openrisc | openrisc-*) basic_machine=or32-unknown ;; os400) basic_machine=powerpc-ibm os=-os400 ;; OSE68000 | ose68000) basic_machine=m68000-ericsson os=-ose ;; os68k) basic_machine=m68k-none os=-os68k ;; pa-hitachi) basic_machine=hppa1.1-hitachi os=-hiuxwe2 ;; paragon) basic_machine=i860-intel os=-osf ;; parisc) basic_machine=hppa-unknown os=-linux ;; parisc-*) basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'` os=-linux ;; pbd) basic_machine=sparc-tti ;; pbb) basic_machine=m68k-tti ;; pc532 | pc532-*) basic_machine=ns32k-pc532 ;; pc98) basic_machine=i386-pc ;; pc98-*) basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentium | p5 | k5 | k6 | nexgen | viac3) basic_machine=i586-pc ;; pentiumpro | p6 | 6x86 | athlon | athlon_*) basic_machine=i686-pc ;; pentiumii | pentium2 | pentiumiii | pentium3) basic_machine=i686-pc ;; pentium4) basic_machine=i786-pc ;; pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentiumpro-* | p6-* | 6x86-* | athlon-*) basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentium4-*) basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pn) basic_machine=pn-gould ;; power) basic_machine=power-ibm ;; ppc) basic_machine=powerpc-unknown ;; ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppcle | powerpclittle | ppc-le | powerpc-little) basic_machine=powerpcle-unknown ;; ppcle-* | powerpclittle-*) basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppc64) basic_machine=powerpc64-unknown ;; ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppc64le | powerpc64little | ppc64-le | powerpc64-little) basic_machine=powerpc64le-unknown ;; ppc64le-* | powerpc64little-*) basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ps2) basic_machine=i386-ibm ;; pw32) basic_machine=i586-unknown os=-pw32 ;; rdos) basic_machine=i386-pc os=-rdos ;; rom68k) basic_machine=m68k-rom68k os=-coff ;; rm[46]00) basic_machine=mips-siemens ;; rtpc | rtpc-*) basic_machine=romp-ibm ;; s390 | s390-*) basic_machine=s390-ibm ;; s390x | s390x-*) basic_machine=s390x-ibm ;; sa29200) basic_machine=a29k-amd os=-udi ;; sb1) basic_machine=mipsisa64sb1-unknown ;; sb1el) basic_machine=mipsisa64sb1el-unknown ;; sde) basic_machine=mipsisa32-sde os=-elf ;; sei) basic_machine=mips-sei os=-seiux ;; sequent) basic_machine=i386-sequent ;; sh) basic_machine=sh-hitachi os=-hms ;; sh5el) basic_machine=sh5le-unknown ;; sh64) basic_machine=sh64-unknown ;; sparclite-wrs | simso-wrs) basic_machine=sparclite-wrs os=-vxworks ;; sps7) basic_machine=m68k-bull os=-sysv2 ;; spur) basic_machine=spur-unknown ;; st2000) basic_machine=m68k-tandem ;; stratus) basic_machine=i860-stratus os=-sysv4 ;; sun2) basic_machine=m68000-sun ;; sun2os3) basic_machine=m68000-sun os=-sunos3 ;; sun2os4) basic_machine=m68000-sun os=-sunos4 ;; sun3os3) basic_machine=m68k-sun os=-sunos3 ;; sun3os4) basic_machine=m68k-sun os=-sunos4 ;; sun4os3) basic_machine=sparc-sun os=-sunos3 ;; sun4os4) basic_machine=sparc-sun os=-sunos4 ;; sun4sol2) basic_machine=sparc-sun os=-solaris2 ;; sun3 | sun3-*) basic_machine=m68k-sun ;; sun4) basic_machine=sparc-sun ;; sun386 | sun386i | roadrunner) basic_machine=i386-sun ;; sv1) basic_machine=sv1-cray os=-unicos ;; symmetry) basic_machine=i386-sequent os=-dynix ;; t3e) basic_machine=alphaev5-cray os=-unicos ;; t90) basic_machine=t90-cray os=-unicos ;; tic54x | c54x*) basic_machine=tic54x-unknown os=-coff ;; tic55x | c55x*) basic_machine=tic55x-unknown os=-coff ;; tic6x | c6x*) basic_machine=tic6x-unknown os=-coff ;; tile*) basic_machine=tile-unknown os=-linux-gnu ;; tx39) basic_machine=mipstx39-unknown ;; tx39el) basic_machine=mipstx39el-unknown ;; toad1) basic_machine=pdp10-xkl os=-tops20 ;; tower | tower-32) basic_machine=m68k-ncr ;; tpf) basic_machine=s390x-ibm os=-tpf ;; udi29k) basic_machine=a29k-amd os=-udi ;; ultra3) basic_machine=a29k-nyu os=-sym1 ;; v810 | necv810) basic_machine=v810-nec os=-none ;; vaxv) basic_machine=vax-dec os=-sysv ;; vms) basic_machine=vax-dec os=-vms ;; vpp*|vx|vx-*) basic_machine=f301-fujitsu ;; vxworks960) basic_machine=i960-wrs os=-vxworks ;; vxworks68) basic_machine=m68k-wrs os=-vxworks ;; vxworks29k) basic_machine=a29k-wrs os=-vxworks ;; w65*) basic_machine=w65-wdc os=-none ;; w89k-*) basic_machine=hppa1.1-winbond os=-proelf ;; xbox) basic_machine=i686-pc os=-mingw32 ;; xps | xps100) basic_machine=xps100-honeywell ;; ymp) basic_machine=ymp-cray os=-unicos ;; z8k-*-coff) basic_machine=z8k-unknown os=-sim ;; z80-*-coff) basic_machine=z80-unknown os=-sim ;; none) basic_machine=none-none os=-none ;; # Here we handle the default manufacturer of certain CPU types. It is in # some cases the only manufacturer, in others, it is the most popular. w89k) basic_machine=hppa1.1-winbond ;; op50n) basic_machine=hppa1.1-oki ;; op60c) basic_machine=hppa1.1-oki ;; romp) basic_machine=romp-ibm ;; mmix) basic_machine=mmix-knuth ;; rs6000) basic_machine=rs6000-ibm ;; vax) basic_machine=vax-dec ;; pdp10) # there are many clones, so DEC is not a safe bet basic_machine=pdp10-unknown ;; pdp11) basic_machine=pdp11-dec ;; we32k) basic_machine=we32k-att ;; sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele) basic_machine=sh-unknown ;; sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v) basic_machine=sparc-sun ;; cydra) basic_machine=cydra-cydrome ;; orion) basic_machine=orion-highlevel ;; orion105) basic_machine=clipper-highlevel ;; mac | mpw | mac-mpw) basic_machine=m68k-apple ;; pmac | pmac-mpw) basic_machine=powerpc-apple ;; *-unknown) # Make sure to match an already-canonicalized machine name. ;; *) echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 exit 1 ;; esac # Here we canonicalize certain aliases for manufacturers. case $basic_machine in *-digital*) basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` ;; *-commodore*) basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` ;; *) ;; esac # Decode manufacturer-specific aliases for certain operating systems. if [ x"$os" != x"" ] then case $os in # First match some system type aliases # that might get confused with valid system types. # -solaris* is a basic system type, with this one exception. -solaris1 | -solaris1.*) os=`echo $os | sed -e 's|solaris1|sunos4|'` ;; -solaris) os=-solaris2 ;; -svr4*) os=-sysv4 ;; -unixware*) os=-sysv4.2uw ;; -gnu/linux*) os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` ;; # First accept the basic system types. # The portable systems comes first. # Each alternative MUST END IN A *, to match a version number. # -sysv* is not here because it comes later, after sysvr4. -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\ | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ | -kopensolaris* \ | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ | -aos* | -aros* \ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ | -openbsd* | -solidbsd* \ | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ | -chorusos* | -chorusrdb* | -cegcc* \ | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \ | -uxpv* | -beos* | -mpeix* | -udk* \ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ | -skyos* | -haiku* | -rdos* | -toppers* | -drops*) # Remember, each alternative MUST END IN *, to match a version number. ;; -qnx*) case $basic_machine in x86-* | i*86-*) ;; *) os=-nto$os ;; esac ;; -nto-qnx*) ;; -nto*) os=`echo $os | sed -e 's|nto|nto-qnx|'` ;; -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \ | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) ;; -mac*) os=`echo $os | sed -e 's|mac|macos|'` ;; -linux-dietlibc) os=-linux-dietlibc ;; -linux*) os=`echo $os | sed -e 's|linux|linux-gnu|'` ;; -sunos5*) os=`echo $os | sed -e 's|sunos5|solaris2|'` ;; -sunos6*) os=`echo $os | sed -e 's|sunos6|solaris3|'` ;; -opened*) os=-openedition ;; -os400*) os=-os400 ;; -wince*) os=-wince ;; -osfrose*) os=-osfrose ;; -osf*) os=-osf ;; -utek*) os=-bsd ;; -dynix*) os=-bsd ;; -acis*) os=-aos ;; -atheos*) os=-atheos ;; -syllable*) os=-syllable ;; -386bsd) os=-bsd ;; -ctix* | -uts*) os=-sysv ;; -nova*) os=-rtmk-nova ;; -ns2 ) os=-nextstep2 ;; -nsk*) os=-nsk ;; # Preserve the version number of sinix5. -sinix5.*) os=`echo $os | sed -e 's|sinix|sysv|'` ;; -sinix*) os=-sysv4 ;; -tpf*) os=-tpf ;; -triton*) os=-sysv3 ;; -oss*) os=-sysv3 ;; -svr4) os=-sysv4 ;; -svr3) os=-sysv3 ;; -sysvr4) os=-sysv4 ;; # This must come after -sysvr4. -sysv*) ;; -ose*) os=-ose ;; -es1800*) os=-ose ;; -xenix) os=-xenix ;; -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) os=-mint ;; -aros*) os=-aros ;; -kaos*) os=-kaos ;; -zvmoe) os=-zvmoe ;; -dicos*) os=-dicos ;; -none) ;; *) # Get rid of the `-' at the beginning of $os. os=`echo $os | sed 's/[^-]*-//'` echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 exit 1 ;; esac else # Here we handle the default operating systems that come with various machines. # The value should be what the vendor currently ships out the door with their # machine or put another way, the most popular os provided with the machine. # Note that if you're going to try to match "-MANUFACTURER" here (say, # "-sun"), then you have to tell the case statement up towards the top # that MANUFACTURER isn't an operating system. Otherwise, code above # will signal an error saying that MANUFACTURER isn't an operating # system, and we'll never get to this point. case $basic_machine in score-*) os=-elf ;; spu-*) os=-elf ;; *-acorn) os=-riscix1.2 ;; arm*-rebel) os=-linux ;; arm*-semi) os=-aout ;; c4x-* | tic4x-*) os=-coff ;; # This must come before the *-dec entry. pdp10-*) os=-tops20 ;; pdp11-*) os=-none ;; *-dec | vax-*) os=-ultrix4.2 ;; m68*-apollo) os=-domain ;; i386-sun) os=-sunos4.0.2 ;; m68000-sun) os=-sunos3 # This also exists in the configure program, but was not the # default. # os=-sunos4 ;; m68*-cisco) os=-aout ;; mep-*) os=-elf ;; mips*-cisco) os=-elf ;; mips*-*) os=-elf ;; or32-*) os=-coff ;; *-tti) # must be before sparc entry or we get the wrong os. os=-sysv3 ;; sparc-* | *-sun) os=-sunos4.1.1 ;; *-be) os=-beos ;; *-haiku) os=-haiku ;; *-ibm) os=-aix ;; *-knuth) os=-mmixware ;; *-wec) os=-proelf ;; *-winbond) os=-proelf ;; *-oki) os=-proelf ;; *-hp) os=-hpux ;; *-hitachi) os=-hiux ;; i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) os=-sysv ;; *-cbm) os=-amigaos ;; *-dg) os=-dgux ;; *-dolphin) os=-sysv3 ;; m68k-ccur) os=-rtu ;; m88k-omron*) os=-luna ;; *-next ) os=-nextstep ;; *-sequent) os=-ptx ;; *-crds) os=-unos ;; *-ns) os=-genix ;; i370-*) os=-mvs ;; *-next) os=-nextstep3 ;; *-gould) os=-sysv ;; *-highlevel) os=-bsd ;; *-encore) os=-bsd ;; *-sgi) os=-irix ;; *-siemens) os=-sysv4 ;; *-masscomp) os=-rtu ;; f30[01]-fujitsu | f700-fujitsu) os=-uxpv ;; *-rom68k) os=-coff ;; *-*bug) os=-coff ;; *-apple) os=-macos ;; *-atari*) os=-mint ;; *) os=-none ;; esac fi # Here we handle the case where we know the os, and the CPU type, but not the # manufacturer. We pick the logical manufacturer. vendor=unknown case $basic_machine in *-unknown) case $os in -riscix*) vendor=acorn ;; -sunos*) vendor=sun ;; -cnk*|-aix*) vendor=ibm ;; -beos*) vendor=be ;; -hpux*) vendor=hp ;; -mpeix*) vendor=hp ;; -hiux*) vendor=hitachi ;; -unos*) vendor=crds ;; -dgux*) vendor=dg ;; -luna*) vendor=omron ;; -genix*) vendor=ns ;; -mvs* | -opened*) vendor=ibm ;; -os400*) vendor=ibm ;; -ptx*) vendor=sequent ;; -tpf*) vendor=ibm ;; -vxsim* | -vxworks* | -windiss*) vendor=wrs ;; -aux*) vendor=apple ;; -hms*) vendor=hitachi ;; -mpw* | -macos*) vendor=apple ;; -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) vendor=atari ;; -vos*) vendor=stratus ;; esac basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` ;; esac echo $basic_machine$os exit # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "timestamp='" # time-stamp-format: "%:y-%02m-%02d" # time-stamp-end: "'" # End: netspeed_applet-0.16/intltool-merge.in0000644000175000017500000000000011402461230015005 00000000000000netspeed_applet-0.16/NEWS0000644000175000017500000000000011402426203012214 00000000000000netspeed_applet-0.16/configure0000755000175000017500000156446511402461237013471 00000000000000#! /bin/sh # Guess values for system-dependent variables and create Makefiles. # Generated by GNU Autoconf 2.65 for netspeed_applet 0.16. # # Report bugs to . # # # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, # 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # # # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. ## -------------------- ## ## M4sh Initialization. ## ## -------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi as_nl=' ' export as_nl # Printing a long string crashes Solaris 7 /usr/bin/printf. as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo # Prefer a ksh shell builtin over an external printf program on Solaris, # but without wasting forks for bash or zsh. if test -z "$BASH_VERSION$ZSH_VERSION" \ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='print -r --' as_echo_n='print -rn --' elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='printf %s\n' as_echo_n='printf %s' else if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' as_echo_n='/usr/ucb/echo -n' else as_echo_body='eval expr "X$1" : "X\\(.*\\)"' as_echo_n_body='eval arg=$1; case $arg in #( *"$as_nl"*) expr "X$arg" : "X\\(.*\\)$as_nl"; arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; esac; expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" ' export as_echo_n_body as_echo_n='sh -c $as_echo_n_body as_echo' fi export as_echo_body as_echo='sh -c $as_echo_body as_echo' fi # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || PATH_SEPARATOR=';' } fi # IFS # We need space, tab and new line, in precisely that order. Quoting is # there to prevent editors from complaining about space-tab. # (If _AS_PATH_WALK were called with IFS unset, it would disable word # splitting by setting IFS to empty value.) IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. case $0 in #(( *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done IFS=$as_save_IFS ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 exit 1 fi # Unset variables that we do not need and which cause bugs (e.g. in # pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" # suppresses any "Segmentation fault" message there. '((' could # trigger a bug in pdksh 5.2.14. for as_var in BASH_ENV ENV MAIL MAILPATH do eval test x\${$as_var+set} = xset \ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. LC_ALL=C export LC_ALL LANGUAGE=C export LANGUAGE # CDPATH. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH if test "x$CONFIG_SHELL" = x; then as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which # is contrary to our usage. Disable this feature. alias -g '\${1+\"\$@\"}'='\"\$@\"' setopt NO_GLOB_SUBST else case \`(set -o) 2>/dev/null\` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi " as_required="as_fn_return () { (exit \$1); } as_fn_success () { as_fn_return 0; } as_fn_failure () { as_fn_return 1; } as_fn_ret_success () { return 0; } as_fn_ret_failure () { return 1; } exitcode=0 as_fn_success || { exitcode=1; echo as_fn_success failed.; } as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : else exitcode=1; echo positional parameters were not saved. fi test x\$exitcode = x0 || exit 1" as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 test \$(( 1 + 1 )) = 2 || exit 1" if (eval "$as_required") 2>/dev/null; then : as_have_required=yes else as_have_required=no fi if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR as_found=false for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. as_found=: case $as_dir in #( /*) for as_base in sh bash ksh sh5; do # Try only shells that exist, to save several forks. as_shell=$as_dir/$as_base if { test -f "$as_shell" || test -f "$as_shell.exe"; } && { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : CONFIG_SHELL=$as_shell as_have_required=yes if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : break 2 fi fi done;; esac as_found=false done $as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : CONFIG_SHELL=$SHELL as_have_required=yes fi; } IFS=$as_save_IFS if test "x$CONFIG_SHELL" != x; then : # We cannot yet assume a decent shell, so we have to provide a # neutralization value for shells without unset; and this also # works around shells that cannot unset nonexistent variables. BASH_ENV=/dev/null ENV=/dev/null (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV export CONFIG_SHELL exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} fi if test x$as_have_required = xno; then : $as_echo "$0: This script requires a shell more modern than all" $as_echo "$0: the shells that I found on your system." if test x${ZSH_VERSION+set} = xset ; then $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" $as_echo "$0: be upgraded to zsh 4.3.4 or later." else $as_echo "$0: Please tell bug-autoconf@gnu.org and $0: http://www.gnome.org/projects/netspeed about your $0: system, including any error possibly output before this $0: message. Then install a modern shell, or manually run $0: the script under such a shell if you do have one." fi exit 1 fi fi fi SHELL=${CONFIG_SHELL-/bin/sh} export SHELL # Unset more variables known to interfere with behavior of common tools. CLICOLOR_FORCE= GREP_OPTIONS= unset CLICOLOR_FORCE GREP_OPTIONS ## --------------------- ## ## M4sh Shell Functions. ## ## --------------------- ## # as_fn_unset VAR # --------------- # Portably unset VAR. as_fn_unset () { { eval $1=; unset $1;} } as_unset=as_fn_unset # as_fn_set_status STATUS # ----------------------- # Set $? to STATUS, without forking. as_fn_set_status () { return $1 } # as_fn_set_status # as_fn_exit STATUS # ----------------- # Exit the shell with STATUS, even in a "trap 0" or "set -e" context. as_fn_exit () { set +e as_fn_set_status $1 exit $1 } # as_fn_exit # as_fn_mkdir_p # ------------- # Create "$as_dir" as a directory, including parents if necessary. as_fn_mkdir_p () { case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || eval $as_mkdir_p || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir" } # as_fn_mkdir_p # as_fn_append VAR VALUE # ---------------------- # Append the text in VALUE to the end of the definition contained in VAR. Take # advantage of any shell optimizations that allow amortized linear growth over # repeated appends, instead of the typical quadratic growth present in naive # implementations. if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : eval 'as_fn_append () { eval $1+=\$2 }' else as_fn_append () { eval $1=\$$1\$2 } fi # as_fn_append # as_fn_arith ARG... # ------------------ # Perform arithmetic evaluation on the ARGs, and store the result in the # global $as_val. Take advantage of shells that can avoid forks. The arguments # must be portable across $(()) and expr. if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : eval 'as_fn_arith () { as_val=$(( $* )) }' else as_fn_arith () { as_val=`expr "$@" || test $? -eq 1` } fi # as_fn_arith # as_fn_error ERROR [LINENO LOG_FD] # --------------------------------- # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are # provided, also output the error to LOG_FD, referencing LINENO. Then exit the # script with status $?, using 1 if that was 0. as_fn_error () { as_status=$?; test $as_status -eq 0 && as_status=1 if test "$3"; then as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3 fi $as_echo "$as_me: error: $1" >&2 as_fn_exit $as_status } # as_fn_error if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then as_dirname=dirname else as_dirname=false fi as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || $as_echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits as_lineno_1=$LINENO as_lineno_1a=$LINENO as_lineno_2=$LINENO as_lineno_2a=$LINENO eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) sed -n ' p /[$]LINENO/= ' <$as_myself | sed ' s/[$]LINENO.*/&-/ t lineno b :lineno N :loop s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ t loop s/-\n.*// ' >$as_me.lineno && chmod +x "$as_me.lineno" || { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the # original and so on. Autoconf is especially sensitive to this). . "./$as_me.lineno" # Exit status is that of the last command. exit } ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in #((((( -n*) case `echo 'xy\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. xy) ECHO_C='\c';; *) echo `echo ksh88 bug on AIX 6.1` > /dev/null ECHO_T=' ';; esac;; *) ECHO_N='-n';; esac rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir mkdir conf$$.dir 2>/dev/null fi if (echo >conf$$.file) 2>/dev/null; then if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. # In both cases, we have to default to `cp -p'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -p' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -p' fi else as_ln_s='cp -p' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null if mkdir -p . 2>/dev/null; then as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false fi if test -x / >/dev/null 2>&1; then as_test_x='test -x' else if ls -dL / >/dev/null 2>&1; then as_ls_L_option=L else as_ls_L_option= fi as_test_x=' eval sh -c '\'' if test -d "$1"; then test -d "$1/."; else case $1 in #( -*)set "./$1";; esac; case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( ???[sx]*):;;*)false;;esac;fi '\'' sh ' fi as_executable_p=$as_test_x # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" # Check that we are running under the correct shell. SHELL=${CONFIG_SHELL-/bin/sh} case X$lt_ECHO in X*--fallback-echo) # Remove one level of quotation (which was required for Make). ECHO=`echo "$lt_ECHO" | sed 's,\\\\\$\\$0,'$0','` ;; esac ECHO=${lt_ECHO-echo} if test "X$1" = X--no-reexec; then # Discard the --no-reexec flag, and continue. shift elif test "X$1" = X--fallback-echo; then # Avoid inline document here, it may be left over : elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then # Yippee, $ECHO works! : else # Restart under the correct shell. exec $SHELL "$0" --no-reexec ${1+"$@"} fi if test "X$1" = X--fallback-echo; then # used as fallback echo shift cat <<_LT_EOF $* _LT_EOF exit 0 fi # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH if test -z "$lt_ECHO"; then if test "X${echo_test_string+set}" != Xset; then # find a string as large as possible, as long as the shell can cope with it for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... if { echo_test_string=`eval $cmd`; } 2>/dev/null && { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null then break fi done fi if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then : else # The Solaris, AIX, and Digital Unix default echo programs unquote # backslashes. This makes it impossible to quote backslashes using # echo "$something" | sed 's/\\/\\\\/g' # # So, first we look for a working echo in the user's PATH. lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for dir in $PATH /usr/ucb; do IFS="$lt_save_ifs" if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then ECHO="$dir/echo" break fi done IFS="$lt_save_ifs" if test "X$ECHO" = Xecho; then # We didn't find a better echo, so look for alternatives. if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' && echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then # This shell has a builtin print -r that does the trick. ECHO='print -r' elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } && test "X$CONFIG_SHELL" != X/bin/ksh; then # If we have ksh, try running configure again with it. ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} export ORIGINAL_CONFIG_SHELL CONFIG_SHELL=/bin/ksh export CONFIG_SHELL exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"} else # Try using printf. ECHO='printf %s\n' if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then # Cool, printf works : elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && test "X$echo_testing_string" = 'X\t' && echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL export CONFIG_SHELL SHELL="$CONFIG_SHELL" export SHELL ECHO="$CONFIG_SHELL $0 --fallback-echo" elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && test "X$echo_testing_string" = 'X\t' && echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then ECHO="$CONFIG_SHELL $0 --fallback-echo" else # maybe with a smaller string... prev=: for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null then break fi prev="$cmd" done if test "$prev" != 'sed 50q "$0"'; then echo_test_string=`eval $prev` export echo_test_string exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"} else # Oops. We lost completely, so just stick with echo. ECHO=echo fi fi fi fi fi fi # Copy echo and quote the copy suitably for passing to libtool from # the Makefile, instead of quoting the original, which is used later. lt_ECHO=$ECHO if test "X$lt_ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then lt_ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo" fi test -n "$DJDIR" || exec 7<&0 &1 # Name of the host. # hostname on some systems (SVR3.2, Linux) returns a bogus exit status, # so uname gets run too. ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` # # Initializations. # ac_default_prefix=/usr/local ac_clean_files= ac_config_libobj_dir=. LIBOBJS= cross_compiling=no subdirs= MFLAGS= MAKEFLAGS= # Identity of this package. PACKAGE_NAME='netspeed_applet' PACKAGE_TARNAME='netspeed_applet' PACKAGE_VERSION='0.16' PACKAGE_STRING='netspeed_applet 0.16' PACKAGE_BUGREPORT='http://www.gnome.org/projects/netspeed' PACKAGE_URL='' ac_unique_file="src/netspeed.c" # Factoring default headers for most tests. ac_includes_default="\ #include #ifdef HAVE_SYS_TYPES_H # include #endif #ifdef HAVE_SYS_STAT_H # include #endif #ifdef STDC_HEADERS # include # include #else # ifdef HAVE_STDLIB_H # include # endif #endif #ifdef HAVE_STRING_H # if !defined STDC_HEADERS && defined HAVE_MEMORY_H # include # endif # include #endif #ifdef HAVE_STRINGS_H # include #endif #ifdef HAVE_INTTYPES_H # include #endif #ifdef HAVE_STDINT_H # include #endif #ifdef HAVE_UNISTD_H # include #endif" ac_subst_vars='am__EXEEXT_FALSE am__EXEEXT_TRUE LTLIBOBJS LIBOBJS IWLIB HAVE_GNOME_DOC_UTILS_FALSE HAVE_GNOME_DOC_UTILS_TRUE DISTCHECK_CONFIGURE_FLAGS ENABLE_SK_FALSE ENABLE_SK_TRUE DOC_USER_FORMATS OMF_DIR HELP_DIR NETSPEED_APPLET_LIBS NETSPEED_APPLET_CFLAGS NETSPEED_LIBS NETSPEED_CFLAGS PKG_CONFIG GETTEXT_PACKAGE MKINSTALLDIRS POSUB POFILES PO_IN_DATADIR_FALSE PO_IN_DATADIR_TRUE INTLLIBS INSTOBJEXT GMOFILES CATOBJEXT CATALOGS MSGFMT_OPTS CPP OTOOL64 OTOOL LIPO NMEDIT DSYMUTIL lt_ECHO RANLIB AR OBJDUMP LN_S NM ac_ct_DUMPBIN DUMPBIN LD FGREP EGREP GREP SED host_os host_vendor host_cpu host build_os build_vendor build_cpu build LIBTOOL DATADIRNAME am__fastdepCC_FALSE am__fastdepCC_TRUE CCDEPMODE AMDEPBACKSLASH AMDEP_FALSE AMDEP_TRUE am__quote am__include DEPDIR OBJEXT EXEEXT ac_ct_CC CPPFLAGS LDFLAGS CFLAGS CC ALL_LINGUAS INTLTOOL_PERL GMSGFMT MSGFMT MSGMERGE XGETTEXT INTLTOOL_POLICY_RULE INTLTOOL_SERVICE_RULE INTLTOOL_THEME_RULE INTLTOOL_SCHEMAS_RULE INTLTOOL_CAVES_RULE INTLTOOL_XML_NOMERGE_RULE INTLTOOL_XML_RULE INTLTOOL_KBD_RULE INTLTOOL_XAM_RULE INTLTOOL_UI_RULE INTLTOOL_SOUNDLIST_RULE INTLTOOL_SHEET_RULE INTLTOOL_SERVER_RULE INTLTOOL_PONG_RULE INTLTOOL_OAF_RULE INTLTOOL_PROP_RULE INTLTOOL_KEYS_RULE INTLTOOL_DIRECTORY_RULE INTLTOOL_DESKTOP_RULE INTLTOOL_EXTRACT INTLTOOL_MERGE INTLTOOL_UPDATE USE_NLS MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE am__untar am__tar AMTAR am__leading_dot SET_MAKE AWK mkdir_p MKDIR_P INSTALL_STRIP_PROGRAM STRIP install_sh MAKEINFO AUTOHEADER AUTOMAKE AUTOCONF ACLOCAL VERSION PACKAGE CYGPATH_W am__isrc INSTALL_DATA INSTALL_SCRIPT INSTALL_PROGRAM target_alias host_alias build_alias LIBS ECHO_T ECHO_N ECHO_C DEFS mandir localedir libdir psdir pdfdir dvidir htmldir infodir docdir oldincludedir includedir localstatedir sharedstatedir sysconfdir datadir datarootdir libexecdir sbindir bindir program_transform_name prefix exec_prefix PACKAGE_URL PACKAGE_BUGREPORT PACKAGE_STRING PACKAGE_VERSION PACKAGE_TARNAME PACKAGE_NAME PATH_SEPARATOR SHELL' ac_subst_files='' ac_user_opts=' enable_option_checking enable_maintainer_mode enable_nls enable_dependency_tracking enable_shared enable_static with_pic enable_fast_install with_gnu_ld enable_libtool_lock with_help_dir with_omf_dir with_help_formats enable_scrollkeeper ' ac_precious_vars='build_alias host_alias target_alias CC CFLAGS LDFLAGS LIBS CPPFLAGS CPP PKG_CONFIG NETSPEED_CFLAGS NETSPEED_LIBS' # Initialize some variables set by options. ac_init_help= ac_init_version=false ac_unrecognized_opts= ac_unrecognized_sep= # The variables have the same names as the options, with # dashes changed to underlines. cache_file=/dev/null exec_prefix=NONE no_create= no_recursion= prefix=NONE program_prefix=NONE program_suffix=NONE program_transform_name=s,x,x, silent= site= srcdir= verbose= x_includes=NONE x_libraries=NONE # Installation directory options. # These are left unexpanded so users can "make install exec_prefix=/foo" # and all the variables that are supposed to be based on exec_prefix # by default will actually change. # Use braces instead of parens because sh, perl, etc. also accept them. # (The list follows the same order as the GNU Coding Standards.) bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' datarootdir='${prefix}/share' datadir='${datarootdir}' sysconfdir='${prefix}/etc' sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' includedir='${prefix}/include' oldincludedir='/usr/include' docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' infodir='${datarootdir}/info' htmldir='${docdir}' dvidir='${docdir}' pdfdir='${docdir}' psdir='${docdir}' libdir='${exec_prefix}/lib' localedir='${datarootdir}/locale' mandir='${datarootdir}/man' ac_prev= ac_dashdash= for ac_option do # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then eval $ac_prev=\$ac_option ac_prev= continue fi case $ac_option in *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; *) ac_optarg=yes ;; esac # Accept the important Cygnus configure options, so we can diagnose typos. case $ac_dashdash$ac_option in --) ac_dashdash=yes ;; -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) bindir=$ac_optarg ;; -build | --build | --buil | --bui | --bu) ac_prev=build_alias ;; -build=* | --build=* | --buil=* | --bui=* | --bu=*) build_alias=$ac_optarg ;; -cache-file | --cache-file | --cache-fil | --cache-fi \ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ac_prev=cache_file ;; -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) cache_file=$ac_optarg ;; --config-cache | -C) cache_file=config.cache ;; -datadir | --datadir | --datadi | --datad) ac_prev=datadir ;; -datadir=* | --datadir=* | --datadi=* | --datad=*) datadir=$ac_optarg ;; -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ | --dataroo | --dataro | --datar) ac_prev=datarootdir ;; -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) datarootdir=$ac_optarg ;; -disable-* | --disable-*) ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error "invalid feature name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "enable_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval enable_$ac_useropt=no ;; -docdir | --docdir | --docdi | --doc | --do) ac_prev=docdir ;; -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) docdir=$ac_optarg ;; -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) ac_prev=dvidir ;; -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) dvidir=$ac_optarg ;; -enable-* | --enable-*) ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error "invalid feature name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "enable_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval enable_$ac_useropt=\$ac_optarg ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ | --exec | --exe | --ex) ac_prev=exec_prefix ;; -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ | --exec=* | --exe=* | --ex=*) exec_prefix=$ac_optarg ;; -gas | --gas | --ga | --g) # Obsolete; use --with-gas. with_gas=yes ;; -help | --help | --hel | --he | -h) ac_init_help=long ;; -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) ac_init_help=recursive ;; -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) ac_init_help=short ;; -host | --host | --hos | --ho) ac_prev=host_alias ;; -host=* | --host=* | --hos=* | --ho=*) host_alias=$ac_optarg ;; -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) ac_prev=htmldir ;; -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ | --ht=*) htmldir=$ac_optarg ;; -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ | --includ=* | --inclu=* | --incl=* | --inc=*) includedir=$ac_optarg ;; -infodir | --infodir | --infodi | --infod | --info | --inf) ac_prev=infodir ;; -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) infodir=$ac_optarg ;; -libdir | --libdir | --libdi | --libd) ac_prev=libdir ;; -libdir=* | --libdir=* | --libdi=* | --libd=*) libdir=$ac_optarg ;; -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ | --libexe | --libex | --libe) ac_prev=libexecdir ;; -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ | --libexe=* | --libex=* | --libe=*) libexecdir=$ac_optarg ;; -localedir | --localedir | --localedi | --localed | --locale) ac_prev=localedir ;; -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) localedir=$ac_optarg ;; -localstatedir | --localstatedir | --localstatedi | --localstated \ | --localstate | --localstat | --localsta | --localst | --locals) ac_prev=localstatedir ;; -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) localstatedir=$ac_optarg ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ac_prev=mandir ;; -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) mandir=$ac_optarg ;; -nfp | --nfp | --nf) # Obsolete; use --without-fp. with_fp=no ;; -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c | -n) no_create=yes ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) no_recursion=yes ;; -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ | --oldin | --oldi | --old | --ol | --o) ac_prev=oldincludedir ;; -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) oldincludedir=$ac_optarg ;; -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ac_prev=prefix ;; -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) prefix=$ac_optarg ;; -program-prefix | --program-prefix | --program-prefi | --program-pref \ | --program-pre | --program-pr | --program-p) ac_prev=program_prefix ;; -program-prefix=* | --program-prefix=* | --program-prefi=* \ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) program_prefix=$ac_optarg ;; -program-suffix | --program-suffix | --program-suffi | --program-suff \ | --program-suf | --program-su | --program-s) ac_prev=program_suffix ;; -program-suffix=* | --program-suffix=* | --program-suffi=* \ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) program_suffix=$ac_optarg ;; -program-transform-name | --program-transform-name \ | --program-transform-nam | --program-transform-na \ | --program-transform-n | --program-transform- \ | --program-transform | --program-transfor \ | --program-transfo | --program-transf \ | --program-trans | --program-tran \ | --progr-tra | --program-tr | --program-t) ac_prev=program_transform_name ;; -program-transform-name=* | --program-transform-name=* \ | --program-transform-nam=* | --program-transform-na=* \ | --program-transform-n=* | --program-transform-=* \ | --program-transform=* | --program-transfor=* \ | --program-transfo=* | --program-transf=* \ | --program-trans=* | --program-tran=* \ | --progr-tra=* | --program-tr=* | --program-t=*) program_transform_name=$ac_optarg ;; -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) ac_prev=pdfdir ;; -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) pdfdir=$ac_optarg ;; -psdir | --psdir | --psdi | --psd | --ps) ac_prev=psdir ;; -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) psdir=$ac_optarg ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) silent=yes ;; -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ac_prev=sbindir ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ | --sbi=* | --sb=*) sbindir=$ac_optarg ;; -sharedstatedir | --sharedstatedir | --sharedstatedi \ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ | --sharedst | --shareds | --shared | --share | --shar \ | --sha | --sh) ac_prev=sharedstatedir ;; -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ | --sha=* | --sh=*) sharedstatedir=$ac_optarg ;; -site | --site | --sit) ac_prev=site ;; -site=* | --site=* | --sit=*) site=$ac_optarg ;; -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) srcdir=$ac_optarg ;; -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ | --syscon | --sysco | --sysc | --sys | --sy) ac_prev=sysconfdir ;; -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) sysconfdir=$ac_optarg ;; -target | --target | --targe | --targ | --tar | --ta | --t) ac_prev=target_alias ;; -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) target_alias=$ac_optarg ;; -v | -verbose | --verbose | --verbos | --verbo | --verb) verbose=yes ;; -version | --version | --versio | --versi | --vers | -V) ac_init_version=: ;; -with-* | --with-*) ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error "invalid package name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "with_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval with_$ac_useropt=\$ac_optarg ;; -without-* | --without-*) ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error "invalid package name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "with_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval with_$ac_useropt=no ;; --x) # Obsolete; use --with-x. with_x=yes ;; -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ | --x-incl | --x-inc | --x-in | --x-i) ac_prev=x_includes ;; -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) x_includes=$ac_optarg ;; -x-libraries | --x-libraries | --x-librarie | --x-librari \ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ac_prev=x_libraries ;; -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries=$ac_optarg ;; -*) as_fn_error "unrecognized option: \`$ac_option' Try \`$0 --help' for more information." ;; *=*) ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` # Reject names that are not valid shell variable names. case $ac_envvar in #( '' | [0-9]* | *[!_$as_cr_alnum]* ) as_fn_error "invalid variable name: \`$ac_envvar'" ;; esac eval $ac_envvar=\$ac_optarg export $ac_envvar ;; *) # FIXME: should be removed in autoconf 3.0. $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} ;; esac done if test -n "$ac_prev"; then ac_option=--`echo $ac_prev | sed 's/_/-/g'` as_fn_error "missing argument to $ac_option" fi if test -n "$ac_unrecognized_opts"; then case $enable_option_checking in no) ;; fatal) as_fn_error "unrecognized options: $ac_unrecognized_opts" ;; *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; esac fi # Check all directory arguments for consistency. for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ datadir sysconfdir sharedstatedir localstatedir includedir \ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ libdir localedir mandir do eval ac_val=\$$ac_var # Remove trailing slashes. case $ac_val in */ ) ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` eval $ac_var=\$ac_val;; esac # Be sure to have absolute directory names. case $ac_val in [\\/$]* | ?:[\\/]* ) continue;; NONE | '' ) case $ac_var in *prefix ) continue;; esac;; esac as_fn_error "expected an absolute directory name for --$ac_var: $ac_val" done # There might be people who depend on the old broken behavior: `$host' # used to hold the argument of --host etc. # FIXME: To remove some day. build=$build_alias host=$host_alias target=$target_alias # FIXME: To remove some day. if test "x$host_alias" != x; then if test "x$build_alias" = x; then cross_compiling=maybe $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used." >&2 elif test "x$build_alias" != "x$host_alias"; then cross_compiling=yes fi fi ac_tool_prefix= test -n "$host_alias" && ac_tool_prefix=$host_alias- test "$silent" = yes && exec 6>/dev/null ac_pwd=`pwd` && test -n "$ac_pwd" && ac_ls_di=`ls -di .` && ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || as_fn_error "working directory cannot be determined" test "X$ac_ls_di" = "X$ac_pwd_ls_di" || as_fn_error "pwd does not report name of working directory" # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes # Try the directory containing this script, then the parent directory. ac_confdir=`$as_dirname -- "$as_myself" || $as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_myself" : 'X\(//\)[^/]' \| \ X"$as_myself" : 'X\(//\)$' \| \ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_myself" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` srcdir=$ac_confdir if test ! -r "$srcdir/$ac_unique_file"; then srcdir=.. fi else ac_srcdir_defaulted=no fi if test ! -r "$srcdir/$ac_unique_file"; then test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." as_fn_error "cannot find sources ($ac_unique_file) in $srcdir" fi ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" ac_abs_confdir=`( cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error "$ac_msg" pwd)` # When building in place, set srcdir=. if test "$ac_abs_confdir" = "$ac_pwd"; then srcdir=. fi # Remove unnecessary trailing slashes from srcdir. # Double slashes in file names in object file debugging info # mess up M-x gdb in Emacs. case $srcdir in */) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; esac for ac_var in $ac_precious_vars; do eval ac_env_${ac_var}_set=\${${ac_var}+set} eval ac_env_${ac_var}_value=\$${ac_var} eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} eval ac_cv_env_${ac_var}_value=\$${ac_var} done # # Report the --help message. # if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF \`configure' configures netspeed_applet 0.16 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... To assign environment variables (e.g., CC, CFLAGS...), specify them as VAR=VALUE. See below for descriptions of some of the useful variables. Defaults for the options are specified in brackets. Configuration: -h, --help display this help and exit --help=short display options specific to this package --help=recursive display the short help of all the included packages -V, --version display version information and exit -q, --quiet, --silent do not print \`checking...' messages --cache-file=FILE cache test results in FILE [disabled] -C, --config-cache alias for \`--cache-file=config.cache' -n, --no-create do not create output files --srcdir=DIR find the sources in DIR [configure dir or \`..'] Installation directories: --prefix=PREFIX install architecture-independent files in PREFIX [$ac_default_prefix] --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX [PREFIX] By default, \`make install' will install all the files in \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify an installation prefix other than \`$ac_default_prefix' using \`--prefix', for instance \`--prefix=\$HOME'. For better control, use the options below. Fine tuning of the installation directories: --bindir=DIR user executables [EPREFIX/bin] --sbindir=DIR system admin executables [EPREFIX/sbin] --libexecdir=DIR program executables [EPREFIX/libexec] --sysconfdir=DIR read-only single-machine data [PREFIX/etc] --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] --localstatedir=DIR modifiable single-machine data [PREFIX/var] --libdir=DIR object code libraries [EPREFIX/lib] --includedir=DIR C header files [PREFIX/include] --oldincludedir=DIR C header files for non-gcc [/usr/include] --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] --datadir=DIR read-only architecture-independent data [DATAROOTDIR] --infodir=DIR info documentation [DATAROOTDIR/info] --localedir=DIR locale-dependent data [DATAROOTDIR/locale] --mandir=DIR man documentation [DATAROOTDIR/man] --docdir=DIR documentation root [DATAROOTDIR/doc/netspeed_applet] --htmldir=DIR html documentation [DOCDIR] --dvidir=DIR dvi documentation [DOCDIR] --pdfdir=DIR pdf documentation [DOCDIR] --psdir=DIR ps documentation [DOCDIR] _ACEOF cat <<\_ACEOF Program names: --program-prefix=PREFIX prepend PREFIX to installed program names --program-suffix=SUFFIX append SUFFIX to installed program names --program-transform-name=PROGRAM run sed PROGRAM on installed program names System types: --build=BUILD configure for building on BUILD [guessed] --host=HOST cross-compile to build programs to run on HOST [BUILD] _ACEOF fi if test -n "$ac_init_help"; then case $ac_init_help in short | recursive ) echo "Configuration of netspeed_applet 0.16:";; esac cat <<\_ACEOF Optional Features: --disable-option-checking ignore unrecognized --enable/--with options --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer --disable-nls do not use Native Language Support --disable-dependency-tracking speeds up one-time build --enable-dependency-tracking do not reject slow dependency extractors --enable-shared[=PKGS] build shared libraries [default=yes] --enable-static[=PKGS] build static libraries [default=yes] --enable-fast-install[=PKGS] optimize for fast installation [default=yes] --disable-libtool-lock avoid locking (might break parallel builds) --disable-scrollkeeper do not make updates to the scrollkeeper database Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) --with-pic try to use only PIC/non-PIC objects [default=use both] --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-help-dir=DIR path to help docs --with-omf-dir=DIR path to OMF files --with-help-formats=FORMATS list of formats Some influential environment variables: CC C compiler command CFLAGS C compiler flags LDFLAGS linker flags, e.g. -L if you have libraries in a nonstandard directory LIBS libraries to pass to the linker, e.g. -l CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if you have headers in a nonstandard directory CPP C preprocessor PKG_CONFIG path to pkg-config utility NETSPEED_CFLAGS C compiler flags for NETSPEED, overriding pkg-config NETSPEED_LIBS linker flags for NETSPEED, overriding pkg-config Use these variables to override the choices made by `configure' or to help it to find libraries and programs with nonstandard names/locations. Report bugs to . _ACEOF ac_status=$? fi if test "$ac_init_help" = "recursive"; then # If there are subdirs, report their specific --help. for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue test -d "$ac_dir" || { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || continue ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix cd "$ac_dir" || { ac_status=$?; continue; } # Check for guested configure. if test -f "$ac_srcdir/configure.gnu"; then echo && $SHELL "$ac_srcdir/configure.gnu" --help=recursive elif test -f "$ac_srcdir/configure"; then echo && $SHELL "$ac_srcdir/configure" --help=recursive else $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 fi || ac_status=$? cd "$ac_pwd" || { ac_status=$?; break; } done fi test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF netspeed_applet configure 0.16 generated by GNU Autoconf 2.65 Copyright (C) 2009 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. _ACEOF exit fi ## ------------------------ ## ## Autoconf initialization. ## ## ------------------------ ## # ac_fn_c_try_compile LINENO # -------------------------- # Try to compile conftest.$ac_ext, and return whether this succeeded. ac_fn_c_try_compile () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack rm -f conftest.$ac_objext if { { ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compile") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} as_fn_set_status $ac_retval } # ac_fn_c_try_compile # ac_fn_c_try_link LINENO # ----------------------- # Try to link conftest.$ac_ext, and return whether this succeeded. ac_fn_c_try_link () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack rm -f conftest.$ac_objext conftest$ac_exeext if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would # interfere with the next link command; also delete a directory that is # left behind by Apple's compiler. We do this before executing the actions. rm -rf conftest.dSYM conftest_ipa8_conftest.oo eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} as_fn_set_status $ac_retval } # ac_fn_c_try_link # ac_fn_c_check_func LINENO FUNC VAR # ---------------------------------- # Tests whether FUNC exists, setting the cache variable VAR accordingly ac_fn_c_check_func () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Define $2 to an innocuous variant, in case declares $2. For example, HP-UX 11i declares gettimeofday. */ #define $2 innocuous_$2 /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $2 (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef $2 /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char $2 (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined __stub_$2 || defined __stub___$2 choke me #endif int main () { return $2 (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : eval "$3=yes" else eval "$3=no" fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} } # ac_fn_c_check_func # ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES # ------------------------------------------------------- # Tests whether HEADER exists and can be compiled using the include files in # INCLUDES, setting the cache variable VAR accordingly. ac_fn_c_check_header_compile () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 #include <$2> _ACEOF if ac_fn_c_try_compile "$LINENO"; then : eval "$3=yes" else eval "$3=no" fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} } # ac_fn_c_check_header_compile # ac_fn_c_try_cpp LINENO # ---------------------- # Try to preprocess conftest.$ac_ext, and return whether this succeeded. ac_fn_c_try_cpp () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if { { ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } >/dev/null && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} as_fn_set_status $ac_retval } # ac_fn_c_try_cpp # ac_fn_c_try_run LINENO # ---------------------- # Try to link conftest.$ac_ext, and return whether this succeeded. Assumes # that executables *can* be run. ac_fn_c_try_run () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' { { case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; }; then : ac_retval=0 else $as_echo "$as_me: program exited with status $ac_status" >&5 $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=$ac_status fi rm -rf conftest.dSYM conftest_ipa8_conftest.oo eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} as_fn_set_status $ac_retval } # ac_fn_c_try_run # ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES # ------------------------------------------------------- # Tests whether HEADER exists, giving a warning if it cannot be compiled using # the include files in INCLUDES and setting the cache variable VAR # accordingly. ac_fn_c_check_header_mongrel () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : $as_echo_n "(cached) " >&6 fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } else # Is the header compilable? { $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 $as_echo_n "checking $2 usability... " >&6; } cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 #include <$2> _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_header_compiler=yes else ac_header_compiler=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 $as_echo "$ac_header_compiler" >&6; } # Is the header present? { $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 $as_echo_n "checking $2 presence... " >&6; } cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include <$2> _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : ac_header_preproc=yes else ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 $as_echo "$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #(( yes:no: ) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 $as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 $as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} ;; no:yes:* ) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 $as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 $as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 $as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 $as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 $as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} ( cat <<\_ASBOX ## ----------------------------------------------------- ## ## Report this to http://www.gnome.org/projects/netspeed ## ## ----------------------------------------------------- ## _ASBOX ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : $as_echo_n "(cached) " >&6 else eval "$3=\$ac_header_compiler" fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } fi eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} } # ac_fn_c_check_header_mongrel cat >config.log <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by netspeed_applet $as_me 0.16, which was generated by GNU Autoconf 2.65. Invocation command line was $ $0 $@ _ACEOF exec 5>>config.log { cat <<_ASUNAME ## --------- ## ## Platform. ## ## --------- ## hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` uname -m = `(uname -m) 2>/dev/null || echo unknown` uname -r = `(uname -r) 2>/dev/null || echo unknown` uname -s = `(uname -s) 2>/dev/null || echo unknown` uname -v = `(uname -v) 2>/dev/null || echo unknown` /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` /bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` /usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` _ASUNAME as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. $as_echo "PATH: $as_dir" done IFS=$as_save_IFS } >&5 cat >&5 <<_ACEOF ## ----------- ## ## Core tests. ## ## ----------- ## _ACEOF # Keep a trace of the command line. # Strip out --no-create and --no-recursion so they do not pile up. # Strip out --silent because we don't want to record it for future runs. # Also quote any args containing shell meta-characters. # Make two passes to allow for proper duplicate-argument suppression. ac_configure_args= ac_configure_args0= ac_configure_args1= ac_must_keep_next=false for ac_pass in 1 2 do for ac_arg do case $ac_arg in -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) continue ;; *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac case $ac_pass in 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; 2) as_fn_append ac_configure_args1 " '$ac_arg'" if test $ac_must_keep_next = true; then ac_must_keep_next=false # Got value, back to normal. else case $ac_arg in *=* | --config-cache | -C | -disable-* | --disable-* \ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ | -with-* | --with-* | -without-* | --without-* | --x) case "$ac_configure_args0 " in "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; esac ;; -* ) ac_must_keep_next=true ;; esac fi as_fn_append ac_configure_args " '$ac_arg'" ;; esac done done { ac_configure_args0=; unset ac_configure_args0;} { ac_configure_args1=; unset ac_configure_args1;} # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there # would cause problems or look ugly. # WARNING: Use '\'' to represent an apostrophe within the trap. # WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. trap 'exit_status=$? # Save into config.log some information that might help in debugging. { echo cat <<\_ASBOX ## ---------------- ## ## Cache variables. ## ## ---------------- ## _ASBOX echo # The following way of writing the cache mishandles newlines in values, ( for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( *) { eval $ac_var=; unset $ac_var;} ;; esac ;; esac done (set) 2>&1 | case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( *${as_nl}ac_space=\ *) sed -n \ "s/'\''/'\''\\\\'\'''\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" ;; #( *) sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; esac | sort ) echo cat <<\_ASBOX ## ----------------- ## ## Output variables. ## ## ----------------- ## _ASBOX echo for ac_var in $ac_subst_vars do eval ac_val=\$$ac_var case $ac_val in *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac $as_echo "$ac_var='\''$ac_val'\''" done | sort echo if test -n "$ac_subst_files"; then cat <<\_ASBOX ## ------------------- ## ## File substitutions. ## ## ------------------- ## _ASBOX echo for ac_var in $ac_subst_files do eval ac_val=\$$ac_var case $ac_val in *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac $as_echo "$ac_var='\''$ac_val'\''" done | sort echo fi if test -s confdefs.h; then cat <<\_ASBOX ## ----------- ## ## confdefs.h. ## ## ----------- ## _ASBOX echo cat confdefs.h echo fi test "$ac_signal" != 0 && $as_echo "$as_me: caught signal $ac_signal" $as_echo "$as_me: exit $exit_status" } >&5 rm -f core *.core core.conftest.* && rm -f -r conftest* confdefs* conf$$* $ac_clean_files && exit $exit_status ' 0 for ac_signal in 1 2 13 15; do trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal done ac_signal=0 # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -f -r conftest* confdefs.h $as_echo "/* confdefs.h */" > confdefs.h # Predefined preprocessor variables. cat >>confdefs.h <<_ACEOF #define PACKAGE_NAME "$PACKAGE_NAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_TARNAME "$PACKAGE_TARNAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_VERSION "$PACKAGE_VERSION" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_STRING "$PACKAGE_STRING" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_URL "$PACKAGE_URL" _ACEOF # Let the site file select an alternate cache file if it wants to. # Prefer an explicitly selected file to automatically selected ones. ac_site_file1=NONE ac_site_file2=NONE if test -n "$CONFIG_SITE"; then ac_site_file1=$CONFIG_SITE elif test "x$prefix" != xNONE; then ac_site_file1=$prefix/share/config.site ac_site_file2=$prefix/etc/config.site else ac_site_file1=$ac_default_prefix/share/config.site ac_site_file2=$ac_default_prefix/etc/config.site fi for ac_site_file in "$ac_site_file1" "$ac_site_file2" do test "x$ac_site_file" = xNONE && continue if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 $as_echo "$as_me: loading site script $ac_site_file" >&6;} sed 's/^/| /' "$ac_site_file" >&5 . "$ac_site_file" fi done if test -r "$cache_file"; then # Some versions of bash will fail to source /dev/null (special files # actually), so we avoid doing that. DJGPP emulates it as a regular file. if test /dev/null != "$cache_file" && test -f "$cache_file"; then { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 $as_echo "$as_me: loading cache $cache_file" >&6;} case $cache_file in [\\/]* | ?:[\\/]* ) . "$cache_file";; *) . "./$cache_file";; esac fi else { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 $as_echo "$as_me: creating cache $cache_file" >&6;} >$cache_file fi # Check that the precious variables saved in the cache have kept the same # value. ac_cache_corrupted=false for ac_var in $ac_precious_vars; do eval ac_old_set=\$ac_cv_env_${ac_var}_set eval ac_new_set=\$ac_env_${ac_var}_set eval ac_old_val=\$ac_cv_env_${ac_var}_value eval ac_new_val=\$ac_env_${ac_var}_value case $ac_old_set,$ac_new_set in set,) { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 $as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ac_cache_corrupted=: ;; ,set) { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 $as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ac_cache_corrupted=: ;; ,);; *) if test "x$ac_old_val" != "x$ac_new_val"; then # differences in whitespace do not lead to failure. ac_old_val_w=`echo x $ac_old_val` ac_new_val_w=`echo x $ac_new_val` if test "$ac_old_val_w" != "$ac_new_val_w"; then { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 $as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} ac_cache_corrupted=: else { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 $as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} eval $ac_var=\$ac_old_val fi { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 $as_echo "$as_me: former value: \`$ac_old_val'" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 $as_echo "$as_me: current value: \`$ac_new_val'" >&2;} fi;; esac # Pass precious variables to config.status. if test "$ac_new_set" = set; then case $ac_new_val in *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; *) ac_arg=$ac_var=$ac_new_val ;; esac case " $ac_configure_args " in *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. *) as_fn_append ac_configure_args " '$ac_arg'" ;; esac fi done if $ac_cache_corrupted; then { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 $as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} as_fn_error "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 fi ## -------------------- ## ## Main body of script. ## ## -------------------- ## ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu am__api_version='1.11' ac_aux_dir= for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do for ac_t in install-sh install.sh shtool; do if test -f "$ac_dir/$ac_t"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/$ac_t -c" break 2 fi done done if test -z "$ac_aux_dir"; then as_fn_error "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 fi # These three variables are undocumented and unsupported, # and are intended to be withdrawn in a future Autoconf release. # They can cause serious problems if a builder's source tree is in a directory # whose full name contains unusual characters. ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: # SysV /etc/install, /usr/sbin/install # SunOS /usr/etc/install # IRIX /sbin/install # AIX /bin/install # AmigaOS /C/install, which installs bootblocks on floppy discs # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. # Reject install programs that cannot install multiple files. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 $as_echo_n "checking for a BSD-compatible install... " >&6; } if test -z "$INSTALL"; then if test "${ac_cv_path_install+set}" = set; then : $as_echo_n "(cached) " >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. # Account for people who put trailing slashes in PATH elements. case $as_dir/ in #(( ./ | .// | /[cC]/* | \ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ /usr/ucb/* ) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. # Don't use installbsd from OSF since it installs stuff as root # by default. for ac_prog in ginstall scoinst install; do for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then if test $ac_prog = install && grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. : elif test $ac_prog = install && grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # program-specific install script used by HP pwplus--don't use. : else rm -rf conftest.one conftest.two conftest.dir echo one > conftest.one echo two > conftest.two mkdir conftest.dir if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && test -s conftest.one && test -s conftest.two && test -s conftest.dir/conftest.one && test -s conftest.dir/conftest.two then ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" break 3 fi fi fi done done ;; esac done IFS=$as_save_IFS rm -rf conftest.one conftest.two conftest.dir fi if test "${ac_cv_path_install+set}" = set; then INSTALL=$ac_cv_path_install else # As a last resort, use the slow shell script. Don't cache a # value for INSTALL within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the value is a relative name. INSTALL=$ac_install_sh fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 $as_echo "$INSTALL" >&6; } # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 $as_echo_n "checking whether build environment is sane... " >&6; } # Just in case sleep 1 echo timestamp > conftest.file # Reject unsafe characters in $srcdir or the absolute working directory # name. Accept space and tab only in the latter. am_lf=' ' case `pwd` in *[\\\"\#\$\&\'\`$am_lf]*) as_fn_error "unsafe absolute working directory name" "$LINENO" 5;; esac case $srcdir in *[\\\"\#\$\&\'\`$am_lf\ \ ]*) as_fn_error "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;; esac # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` if test "$*" = "X"; then # -L didn't work. set X `ls -t "$srcdir/configure" conftest.file` fi rm -f conftest.file if test "$*" != "X $srcdir/configure conftest.file" \ && test "$*" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". as_fn_error "ls -t appears to fail. Make sure there is not a broken alias in your environment" "$LINENO" 5 fi test "$2" = conftest.file ) then # Ok. : else as_fn_error "newly created file is older than distributed files! Check your system clock" "$LINENO" 5 fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } test "$program_prefix" != NONE && program_transform_name="s&^&$program_prefix&;$program_transform_name" # Use a double $ so make ignores it. test "$program_suffix" != NONE && program_transform_name="s&\$&$program_suffix&;$program_transform_name" # Double any \ or $. # By default was `s,x,x', remove it if useless. ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` # expand $ac_aux_dir to an absolute path am_aux_dir=`cd $ac_aux_dir && pwd` if test x"${MISSING+set}" != xset; then case $am_aux_dir in *\ * | *\ *) MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; *) MISSING="\${SHELL} $am_aux_dir/missing" ;; esac fi # Use eval to expand $SHELL if eval "$MISSING --run true"; then am_missing_run="$MISSING --run " else am_missing_run= { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5 $as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} fi if test x"${install_sh}" != xset; then case $am_aux_dir in *\ * | *\ *) install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; *) install_sh="\${SHELL} $am_aux_dir/install-sh" esac fi # Installed binaries are usually stripped using `strip' when the user # run `make install-strip'. However `strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the `STRIP' environment variable to overrule this program. if test "$cross_compiling" != no; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_STRIP+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 $as_echo "$STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_STRIP"; then ac_ct_STRIP=$STRIP # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_STRIP"; then ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_STRIP="strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 $as_echo "$ac_ct_STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_STRIP" = x; then STRIP=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac STRIP=$ac_ct_STRIP fi else STRIP="$ac_cv_prog_STRIP" fi fi INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 $as_echo_n "checking for a thread-safe mkdir -p... " >&6; } if test -z "$MKDIR_P"; then if test "${ac_cv_path_mkdir+set}" = set; then : $as_echo_n "(cached) " >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in mkdir gmkdir; do for ac_exec_ext in '' $ac_executable_extensions; do { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( 'mkdir (GNU coreutils) '* | \ 'mkdir (coreutils) '* | \ 'mkdir (fileutils) '4.1*) ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext break 3;; esac done done done IFS=$as_save_IFS fi test -d ./--version && rmdir ./--version if test "${ac_cv_path_mkdir+set}" = set; then MKDIR_P="$ac_cv_path_mkdir -p" else # As a last resort, use the slow shell script. Don't cache a # value for MKDIR_P within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the value is a relative name. MKDIR_P="$ac_install_sh -d" fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 $as_echo "$MKDIR_P" >&6; } mkdir_p="$MKDIR_P" case $mkdir_p in [\\/$]* | ?:[\\/]*) ;; */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; esac for ac_prog in gawk mawk nawk awk do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_AWK+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$AWK"; then ac_cv_prog_AWK="$AWK" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_AWK="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi AWK=$ac_cv_prog_AWK if test -n "$AWK"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 $as_echo "$AWK" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$AWK" && break done { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 $as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } set x ${MAKE-make} ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then : $as_echo_n "(cached) " >&6 else cat >conftest.make <<\_ACEOF SHELL = /bin/sh all: @echo '@@@%%%=$(MAKE)=@@@%%%' _ACEOF # GNU make sometimes prints "make[1]: Entering...", which would confuse us. case `${MAKE-make} -f conftest.make 2>/dev/null` in *@@@%%%=?*=@@@%%%*) eval ac_cv_prog_make_${ac_make}_set=yes;; *) eval ac_cv_prog_make_${ac_make}_set=no;; esac rm -f conftest.make fi if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } SET_MAKE= else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } SET_MAKE="MAKE=${MAKE-make}" fi rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output # is not polluted with repeated "-I." am__isrc=' -I$(srcdir)' # test to see if srcdir already configured if test -f $srcdir/config.status; then as_fn_error "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 fi fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi # Define the identity of the package. PACKAGE=netspeed_applet VERSION=0.16 cat >>confdefs.h <<_ACEOF #define PACKAGE "$PACKAGE" _ACEOF cat >>confdefs.h <<_ACEOF #define VERSION "$VERSION" _ACEOF # Some tools Automake needs. ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} # We need awk for the "check" target. The system "awk" is bad on # some platforms. # Always define AMTAR for backward compatibility. AMTAR=${AMTAR-"${am_missing_run}tar"} am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5 $as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; } # Check whether --enable-maintainer-mode was given. if test "${enable_maintainer_mode+set}" = set; then : enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval else USE_MAINTAINER_MODE=no fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5 $as_echo "$USE_MAINTAINER_MODE" >&6; } if test $USE_MAINTAINER_MODE = yes; then MAINTAINER_MODE_TRUE= MAINTAINER_MODE_FALSE='#' else MAINTAINER_MODE_TRUE='#' MAINTAINER_MODE_FALSE= fi MAINT=$MAINTAINER_MODE_TRUE ac_config_headers="$ac_config_headers config.h" { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether NLS is requested" >&5 $as_echo_n "checking whether NLS is requested... " >&6; } # Check whether --enable-nls was given. if test "${enable_nls+set}" = set; then : enableval=$enable_nls; USE_NLS=$enableval else USE_NLS=yes fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_NLS" >&5 $as_echo "$USE_NLS" >&6; } DEPDIR="${am__leading_dot}deps" ac_config_commands="$ac_config_commands depfiles" am_make=${MAKE-make} cat > confinc << 'END' am__doit: @echo this is the am__doit target .PHONY: am__doit END # If we don't find an include directive, just comment out the code. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 $as_echo_n "checking for style of include used by $am_make... " >&6; } am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf # Ignore all kinds of additional output from `make'. case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=include am__quote= _am_result=GNU ;; esac # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=.include am__quote="\"" _am_result=BSD ;; esac fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 $as_echo "$_am_result" >&6; } rm -f confinc confmf # Check whether --enable-dependency-tracking was given. if test "${enable_dependency_tracking+set}" = set; then : enableval=$enable_dependency_tracking; fi if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' fi if test "x$enable_dependency_tracking" != xno; then AMDEP_TRUE= AMDEP_FALSE='#' else AMDEP_TRUE='#' AMDEP_FALSE= fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="${ac_tool_prefix}gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CC="gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi else CC="$ac_cv_prog_CC" fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="${ac_tool_prefix}cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else ac_prog_rejected=no as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift if test $# != 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" fi fi fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then for ac_prog in cl.exe do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$CC" && break done fi if test -z "$CC"; then ac_ct_CC=$CC for ac_prog in cl.exe do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CC="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_CC" && break done if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi fi fi test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error "no acceptable C compiler found in \$PATH See \`config.log' for more details." "$LINENO" 5; } # Provide some information about the compiler. $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 set X $ac_compile ac_compiler=$2 for ac_option in --version -v -V -qversion; do { { ac_try="$ac_compiler $ac_option >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compiler $ac_option >&5") 2>conftest.err ac_status=$? if test -s conftest.err; then sed '10a\ ... rest of stderr output deleted ... 10q' conftest.err >conftest.er1 cat conftest.er1 >&5 fi rm -f conftest.er1 conftest.err $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } done cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" # Try to create an executable without -o first, disregard a.out. # It will help us diagnose broken compilers, and finding out an intuition # of exeext. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 $as_echo_n "checking whether the C compiler works... " >&6; } ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` # The possible output files: ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" ac_rmfiles= for ac_file in $ac_files do case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; * ) ac_rmfiles="$ac_rmfiles $ac_file";; esac done rm -f $ac_rmfiles if { { ac_try="$ac_link_default" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link_default") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then : # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. # So ignore a value of `no', otherwise this would lead to `EXEEXT = no' # in a Makefile. We should not override ac_cv_exeext if it was cached, # so that the user can short-circuit this test for compilers unknown to # Autoconf. for ac_file in $ac_files '' do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; [ab].out ) # We found the default executable, but exeext='' is most # certainly right. break;; *.* ) if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; then :; else ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` fi # We set ac_cv_exeext here because the later test for it is not # safe: cross compilers may not add the suffix if given an `-o' # argument, so we may need to know it at that point already. # Even if this section looks crufty: it has the advantage of # actually working. break;; * ) break;; esac done test "$ac_cv_exeext" = no && ac_cv_exeext= else ac_file='' fi if test -z "$ac_file"; then : { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} { as_fn_set_status 77 as_fn_error "C compiler cannot create executables See \`config.log' for more details." "$LINENO" 5; }; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 $as_echo_n "checking for C compiler default output file name... " >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 $as_echo "$ac_file" >&6; } ac_exeext=$ac_cv_exeext rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out ac_clean_files=$ac_clean_files_save { $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 $as_echo_n "checking for suffix of executables... " >&6; } if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then : # If both `conftest.exe' and `conftest' are `present' (well, observable) # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will # work properly (i.e., refer to `conftest.exe'), while it won't with # `rm'. for ac_file in conftest.exe conftest conftest.*; do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` break;; * ) break;; esac done else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error "cannot compute suffix of executables: cannot compile and link See \`config.log' for more details." "$LINENO" 5; } fi rm -f conftest conftest$ac_cv_exeext { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 $as_echo "$ac_cv_exeext" >&6; } rm -f conftest.$ac_ext EXEEXT=$ac_cv_exeext ac_exeext=$EXEEXT cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int main () { FILE *f = fopen ("conftest.out", "w"); return ferror (f) || fclose (f) != 0; ; return 0; } _ACEOF ac_clean_files="$ac_clean_files conftest.out" # Check that the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 $as_echo_n "checking whether we are cross compiling... " >&6; } if test "$cross_compiling" != yes; then { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } if { ac_try='./conftest$ac_cv_exeext' { { case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; }; then cross_compiling=no else if test "$cross_compiling" = maybe; then cross_compiling=yes else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error "cannot run C compiled programs. If you meant to cross compile, use \`--host'. See \`config.log' for more details." "$LINENO" 5; } fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 $as_echo "$cross_compiling" >&6; } rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out ac_clean_files=$ac_clean_files_save { $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 $as_echo_n "checking for suffix of object files... " >&6; } if test "${ac_cv_objext+set}" = set; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.o conftest.obj if { { ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compile") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then : for ac_file in conftest.o conftest.obj conftest.*; do test -f "$ac_file" || continue; case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` break;; esac done else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error "cannot compute suffix of object files: cannot compile See \`config.log' for more details." "$LINENO" 5; } fi rm -f conftest.$ac_cv_objext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 $as_echo "$ac_cv_objext" >&6; } OBJEXT=$ac_cv_objext ac_objext=$OBJEXT { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 $as_echo_n "checking whether we are using the GNU C compiler... " >&6; } if test "${ac_cv_c_compiler_gnu+set}" = set; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { #ifndef __GNUC__ choke me #endif ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_compiler_gnu=yes else ac_compiler_gnu=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 $as_echo "$ac_cv_c_compiler_gnu" >&6; } if test $ac_compiler_gnu = yes; then GCC=yes else GCC= fi ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 $as_echo_n "checking whether $CC accepts -g... " >&6; } if test "${ac_cv_prog_cc_g+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_save_c_werror_flag=$ac_c_werror_flag ac_c_werror_flag=yes ac_cv_prog_cc_g=no CFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes else CFLAGS="" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : else ac_c_werror_flag=$ac_save_c_werror_flag CFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_c_werror_flag=$ac_save_c_werror_flag fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 $as_echo "$ac_cv_prog_cc_g" >&6; } if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then if test "$GCC" = yes; then CFLAGS="-g -O2" else CFLAGS="-g" fi else if test "$GCC" = yes; then CFLAGS="-O2" else CFLAGS= fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 $as_echo_n "checking for $CC option to accept ISO C89... " >&6; } if test "${ac_cv_prog_cc_c89+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_cv_prog_cc_c89=no ac_save_CC=$CC cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #include #include /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ struct buf { int x; }; FILE * (*rcsopen) (struct buf *, struct stat *, int); static char *e (p, i) char **p; int i; { return p[i]; } static char *f (char * (*g) (char **, int), char **p, ...) { char *s; va_list v; va_start (v,p); s = g (p, va_arg (v,int)); va_end (v); return s; } /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has function prototypes and stuff, but not '\xHH' hex character constants. These don't provoke an error unfortunately, instead are silently treated as 'x'. The following induces an error, until -std is added to get proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an array size at least. It's necessary to write '\x00'==0 to get something that's true only with -std. */ int osf4_cc_array ['\x00' == 0 ? 1 : -1]; /* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters inside strings and character constants. */ #define FOO(x) 'x' int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; int test (int i, double x); struct s1 {int (*f) (int a);}; struct s2 {int (*f) (double a);}; int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); int argc; char **argv; int main () { return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; ; return 0; } _ACEOF for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_c89=$ac_arg fi rm -f core conftest.err conftest.$ac_objext test "x$ac_cv_prog_cc_c89" != "xno" && break done rm -f conftest.$ac_ext CC=$ac_save_CC fi # AC_CACHE_VAL case "x$ac_cv_prog_cc_c89" in x) { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 $as_echo "none needed" >&6; } ;; xno) { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 $as_echo "unsupported" >&6; } ;; *) CC="$CC $ac_cv_prog_cc_c89" { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 $as_echo "$ac_cv_prog_cc_c89" >&6; } ;; esac if test "x$ac_cv_prog_cc_c89" != xno; then : fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu depcc="$CC" am_compiler_list= { $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 $as_echo_n "checking dependency style of $depcc... " >&6; } if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named `D' -- because `-MD' means `put the output # in D'. mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_CC_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` fi am__universal=false case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with # Solaris 8's {/usr,}/bin/sh. touch sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf # We check with `-c' and `-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle `-M -o', and we need to detect this. Also, some Intel # versions had trouble with output in subdirs am__obj=sub/conftest.${OBJEXT-o} am__minus_obj="-o $am__obj" case $depmode in gcc) # This depmode causes a compiler race in universal mode. test "$am__universal" = false || continue ;; nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; msvisualcpp | msvcmsys) # This compiler won't grok `-c -o', but also, the minuso test has # not run yet. These depmodes are late enough in the game, and # so weak that their functioning should not be impacted. am__obj=conftest.${OBJEXT-o} am__minus_obj= ;; none) break ;; esac if depmode=$depmode \ source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_CC_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_CC_dependencies_compiler_type=none fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 $as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type if test "x$enable_dependency_tracking" != xno \ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then am__fastdepCC_TRUE= am__fastdepCC_FALSE='#' else am__fastdepCC_TRUE='#' am__fastdepCC_FALSE= fi case "$am__api_version" in 1.01234) as_fn_error "Automake 1.5 or newer is required to use intltool" "$LINENO" 5 ;; *) ;; esac if test -n "0.35.0"; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for intltool >= 0.35.0" >&5 $as_echo_n "checking for intltool >= 0.35.0... " >&6; } INTLTOOL_REQUIRED_VERSION_AS_INT=`echo 0.35.0 | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` INTLTOOL_APPLIED_VERSION=`intltool-update --version | head -1 | cut -d" " -f3` INTLTOOL_APPLIED_VERSION_AS_INT=`echo $INTLTOOL_APPLIED_VERSION | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_APPLIED_VERSION found" >&5 $as_echo "$INTLTOOL_APPLIED_VERSION found" >&6; } test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge "$INTLTOOL_REQUIRED_VERSION_AS_INT" || as_fn_error "Your intltool is too old. You need intltool 0.35.0 or later." "$LINENO" 5 fi # Extract the first word of "intltool-update", so it can be a program name with args. set dummy intltool-update; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_INTLTOOL_UPDATE+set}" = set; then : $as_echo_n "(cached) " >&6 else case $INTLTOOL_UPDATE in [\\/]* | ?:[\\/]*) ac_cv_path_INTLTOOL_UPDATE="$INTLTOOL_UPDATE" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_INTLTOOL_UPDATE="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi INTLTOOL_UPDATE=$ac_cv_path_INTLTOOL_UPDATE if test -n "$INTLTOOL_UPDATE"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_UPDATE" >&5 $as_echo "$INTLTOOL_UPDATE" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi # Extract the first word of "intltool-merge", so it can be a program name with args. set dummy intltool-merge; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_INTLTOOL_MERGE+set}" = set; then : $as_echo_n "(cached) " >&6 else case $INTLTOOL_MERGE in [\\/]* | ?:[\\/]*) ac_cv_path_INTLTOOL_MERGE="$INTLTOOL_MERGE" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_INTLTOOL_MERGE="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi INTLTOOL_MERGE=$ac_cv_path_INTLTOOL_MERGE if test -n "$INTLTOOL_MERGE"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_MERGE" >&5 $as_echo "$INTLTOOL_MERGE" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi # Extract the first word of "intltool-extract", so it can be a program name with args. set dummy intltool-extract; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_INTLTOOL_EXTRACT+set}" = set; then : $as_echo_n "(cached) " >&6 else case $INTLTOOL_EXTRACT in [\\/]* | ?:[\\/]*) ac_cv_path_INTLTOOL_EXTRACT="$INTLTOOL_EXTRACT" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_INTLTOOL_EXTRACT="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi INTLTOOL_EXTRACT=$ac_cv_path_INTLTOOL_EXTRACT if test -n "$INTLTOOL_EXTRACT"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_EXTRACT" >&5 $as_echo "$INTLTOOL_EXTRACT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test -z "$INTLTOOL_UPDATE" -o -z "$INTLTOOL_MERGE" -o -z "$INTLTOOL_EXTRACT"; then as_fn_error "The intltool scripts were not found. Please install intltool." "$LINENO" 5 fi INTLTOOL_DESKTOP_RULE='%.desktop: %.desktop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_DIRECTORY_RULE='%.directory: %.directory.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_KEYS_RULE='%.keys: %.keys.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -k -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_PROP_RULE='%.prop: %.prop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_OAF_RULE='%.oaf: %.oaf.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -o -p $(top_srcdir)/po $< $@' INTLTOOL_PONG_RULE='%.pong: %.pong.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_SERVER_RULE='%.server: %.server.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -o -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_SHEET_RULE='%.sheet: %.sheet.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_SOUNDLIST_RULE='%.soundlist: %.soundlist.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_UI_RULE='%.ui: %.ui.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_XML_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_XML_NOMERGE_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u /tmp $< $@' INTLTOOL_XAM_RULE='%.xam: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_KBD_RULE='%.kbd: %.kbd.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -m -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_CAVES_RULE='%.caves: %.caves.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_SCHEMAS_RULE='%.schemas: %.schemas.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -s -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_THEME_RULE='%.theme: %.theme.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_SERVICE_RULE='%.service: %.service.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' INTLTOOL_POLICY_RULE='%.policy: %.policy.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' # Check the gettext tools to make sure they are GNU # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_XGETTEXT+set}" = set; then : $as_echo_n "(cached) " >&6 else case $XGETTEXT in [\\/]* | ?:[\\/]*) ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_XGETTEXT="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi XGETTEXT=$ac_cv_path_XGETTEXT if test -n "$XGETTEXT"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XGETTEXT" >&5 $as_echo "$XGETTEXT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi # Extract the first word of "msgmerge", so it can be a program name with args. set dummy msgmerge; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_MSGMERGE+set}" = set; then : $as_echo_n "(cached) " >&6 else case $MSGMERGE in [\\/]* | ?:[\\/]*) ac_cv_path_MSGMERGE="$MSGMERGE" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_MSGMERGE="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi MSGMERGE=$ac_cv_path_MSGMERGE if test -n "$MSGMERGE"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGMERGE" >&5 $as_echo "$MSGMERGE" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_MSGFMT+set}" = set; then : $as_echo_n "(cached) " >&6 else case $MSGFMT in [\\/]* | ?:[\\/]*) ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_MSGFMT="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi MSGFMT=$ac_cv_path_MSGFMT if test -n "$MSGFMT"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGFMT" >&5 $as_echo "$MSGFMT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_GMSGFMT+set}" = set; then : $as_echo_n "(cached) " >&6 else case $GMSGFMT in [\\/]* | ?:[\\/]*) ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT" ;; esac fi GMSGFMT=$ac_cv_path_GMSGFMT if test -n "$GMSGFMT"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GMSGFMT" >&5 $as_echo "$GMSGFMT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test -z "$XGETTEXT" -o -z "$MSGMERGE" -o -z "$MSGFMT"; then as_fn_error "GNU gettext tools not found; required for intltool" "$LINENO" 5 fi xgversion="`$XGETTEXT --version|grep '(GNU ' 2> /dev/null`" mmversion="`$MSGMERGE --version|grep '(GNU ' 2> /dev/null`" mfversion="`$MSGFMT --version|grep '(GNU ' 2> /dev/null`" if test -z "$xgversion" -o -z "$mmversion" -o -z "$mfversion"; then as_fn_error "GNU gettext tools not found; required for intltool" "$LINENO" 5 fi # Extract the first word of "perl", so it can be a program name with args. set dummy perl; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_INTLTOOL_PERL+set}" = set; then : $as_echo_n "(cached) " >&6 else case $INTLTOOL_PERL in [\\/]* | ?:[\\/]*) ac_cv_path_INTLTOOL_PERL="$INTLTOOL_PERL" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_INTLTOOL_PERL="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi INTLTOOL_PERL=$ac_cv_path_INTLTOOL_PERL if test -n "$INTLTOOL_PERL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_PERL" >&5 $as_echo "$INTLTOOL_PERL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test -z "$INTLTOOL_PERL"; then as_fn_error "perl not found" "$LINENO" 5 fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for perl >= 5.8.1" >&5 $as_echo_n "checking for perl >= 5.8.1... " >&6; } $INTLTOOL_PERL -e "use 5.8.1;" > /dev/null 2>&1 if test $? -ne 0; then as_fn_error "perl 5.8.1 is required for intltool" "$LINENO" 5 else IT_PERL_VERSION="`$INTLTOOL_PERL -e \"printf '%vd', $^V\"`" { $as_echo "$as_me:${as_lineno-$LINENO}: result: $IT_PERL_VERSION" >&5 $as_echo "$IT_PERL_VERSION" >&6; } fi if test "x" != "xno-xml"; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for XML::Parser" >&5 $as_echo_n "checking for XML::Parser... " >&6; } if `$INTLTOOL_PERL -e "require XML::Parser" 2>/dev/null`; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 $as_echo "ok" >&6; } else as_fn_error "XML::Parser perl module is required for intltool" "$LINENO" 5 fi fi # Substitute ALL_LINGUAS so we can use it in po/Makefile # Set DATADIRNAME correctly if it is not set yet # (copied from glib-gettext.m4) if test -z "$DATADIRNAME"; then cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { extern int _nl_msg_cat_cntr; return _nl_msg_cat_cntr ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : DATADIRNAME=share else case $host in *-*-solaris*) ac_fn_c_check_func "$LINENO" "bind_textdomain_codeset" "ac_cv_func_bind_textdomain_codeset" if test "x$ac_cv_func_bind_textdomain_codeset" = x""yes; then : DATADIRNAME=share else DATADIRNAME=lib fi ;; *) DATADIRNAME=lib ;; esac fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi case `pwd` in *\ * | *\ *) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 $as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; esac macro_version='2.2.6b' macro_revision='1.3017' ltmain="$ac_aux_dir/ltmain.sh" # Make sure we can run config.sub. $SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || as_fn_error "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 { $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 $as_echo_n "checking build system type... " >&6; } if test "${ac_cv_build+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_build_alias=$build_alias test "x$ac_build_alias" = x && ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` test "x$ac_build_alias" = x && as_fn_error "cannot guess build type; you must specify one" "$LINENO" 5 ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || as_fn_error "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 $as_echo "$ac_cv_build" >&6; } case $ac_cv_build in *-*-*) ;; *) as_fn_error "invalid value of canonical build" "$LINENO" 5;; esac build=$ac_cv_build ac_save_IFS=$IFS; IFS='-' set x $ac_cv_build shift build_cpu=$1 build_vendor=$2 shift; shift # Remember, the first character of IFS is used to create $*, # except with old shells: build_os=$* IFS=$ac_save_IFS case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 $as_echo_n "checking host system type... " >&6; } if test "${ac_cv_host+set}" = set; then : $as_echo_n "(cached) " >&6 else if test "x$host_alias" = x; then ac_cv_host=$ac_cv_build else ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || as_fn_error "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 $as_echo "$ac_cv_host" >&6; } case $ac_cv_host in *-*-*) ;; *) as_fn_error "invalid value of canonical host" "$LINENO" 5;; esac host=$ac_cv_host ac_save_IFS=$IFS; IFS='-' set x $ac_cv_host shift host_cpu=$1 host_vendor=$2 shift; shift # Remember, the first character of IFS is used to create $*, # except with old shells: host_os=$* IFS=$ac_save_IFS case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 $as_echo_n "checking for a sed that does not truncate output... " >&6; } if test "${ac_cv_path_SED+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ for ac_i in 1 2 3 4 5 6 7; do ac_script="$ac_script$as_nl$ac_script" done echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed { ac_script=; unset ac_script;} if test -z "$SED"; then ac_path_SED_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in sed gsed; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue # Check for GNU ac_path_SED and select it if it is found. # Check for GNU $ac_path_SED case `"$ac_path_SED" --version 2>&1` in *GNU*) ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo '' >> "conftest.nl" "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_SED_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_SED="$ac_path_SED" ac_path_SED_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_SED_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_SED"; then as_fn_error "no acceptable sed could be found in \$PATH" "$LINENO" 5 fi else ac_cv_path_SED=$SED fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5 $as_echo "$ac_cv_path_SED" >&6; } SED="$ac_cv_path_SED" rm -f conftest.sed test -z "$SED" && SED=sed Xsed="$SED -e 1s/^X//" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 $as_echo_n "checking for grep that handles long lines and -e... " >&6; } if test "${ac_cv_path_GREP+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -z "$GREP"; then ac_path_GREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in grep ggrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue # Check for GNU ac_path_GREP and select it if it is found. # Check for GNU $ac_path_GREP case `"$ac_path_GREP" --version 2>&1` in *GNU*) ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo 'GREP' >> "conftest.nl" "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_GREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_GREP_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_GREP"; then as_fn_error "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 fi else ac_cv_path_GREP=$GREP fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 $as_echo "$ac_cv_path_GREP" >&6; } GREP="$ac_cv_path_GREP" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 $as_echo_n "checking for egrep... " >&6; } if test "${ac_cv_path_EGREP+set}" = set; then : $as_echo_n "(cached) " >&6 else if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 then ac_cv_path_EGREP="$GREP -E" else if test -z "$EGREP"; then ac_path_EGREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in egrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue # Check for GNU ac_path_EGREP and select it if it is found. # Check for GNU $ac_path_EGREP case `"$ac_path_EGREP" --version 2>&1` in *GNU*) ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo 'EGREP' >> "conftest.nl" "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_EGREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_EGREP_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_EGREP"; then as_fn_error "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 fi else ac_cv_path_EGREP=$EGREP fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 $as_echo "$ac_cv_path_EGREP" >&6; } EGREP="$ac_cv_path_EGREP" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5 $as_echo_n "checking for fgrep... " >&6; } if test "${ac_cv_path_FGREP+set}" = set; then : $as_echo_n "(cached) " >&6 else if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 then ac_cv_path_FGREP="$GREP -F" else if test -z "$FGREP"; then ac_path_FGREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in fgrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue # Check for GNU ac_path_FGREP and select it if it is found. # Check for GNU $ac_path_FGREP case `"$ac_path_FGREP" --version 2>&1` in *GNU*) ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo 'FGREP' >> "conftest.nl" "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_FGREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_FGREP_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_FGREP"; then as_fn_error "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 fi else ac_cv_path_FGREP=$FGREP fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5 $as_echo "$ac_cv_path_FGREP" >&6; } FGREP="$ac_cv_path_FGREP" test -z "$GREP" && GREP=grep # Check whether --with-gnu-ld was given. if test "${with_gnu_ld+set}" = set; then : withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes else with_gnu_ld=no fi ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 $as_echo_n "checking for ld used by $CC... " >&6; } case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [\\/]* | ?:[\\/]*) re_direlt='/[^/][^/]*/\.\./' # Canonicalize the pathname of ld ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 $as_echo_n "checking for GNU ld... " >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 $as_echo_n "checking for non-GNU ld... " >&6; } fi if test "${lt_cv_path_LD+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -z "$LD"; then lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some variants of GNU ld only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$lt_cv_path_LD" -v 2>&1 &5 $as_echo "$LD" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -z "$LD" && as_fn_error "no acceptable ld found in \$PATH" "$LINENO" 5 { $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 $as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } if test "${lt_cv_prog_gnu_ld+set}" = set; then : $as_echo_n "(cached) " >&6 else # I'd rather use --version here, but apparently some GNU lds only accept -v. case `$LD -v 2>&1 &5 $as_echo "$lt_cv_prog_gnu_ld" >&6; } with_gnu_ld=$lt_cv_prog_gnu_ld { $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5 $as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; } if test "${lt_cv_path_NM+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$NM"; then # Let the user override the test. lt_cv_path_NM="$NM" else lt_nm_to_check="${ac_tool_prefix}nm" if test -n "$ac_tool_prefix" && test "$build" = "$host"; then lt_nm_to_check="$lt_nm_to_check nm" fi for lt_tmp_nm in $lt_nm_to_check; do lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. tmp_nm="$ac_dir/$lt_tmp_nm" if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then # Check to see if the nm accepts a BSD-compat flag. # Adding the `sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored # Tru64's nm complains that /dev/null is an invalid object file case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in */dev/null* | *'Invalid file or object type'*) lt_cv_path_NM="$tmp_nm -B" break ;; *) case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in */dev/null*) lt_cv_path_NM="$tmp_nm -p" break ;; *) lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but continue # so that we can try to find one that supports BSD flags ;; esac ;; esac fi done IFS="$lt_save_ifs" done : ${lt_cv_path_NM=no} fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5 $as_echo "$lt_cv_path_NM" >&6; } if test "$lt_cv_path_NM" != "no"; then NM="$lt_cv_path_NM" else # Didn't find any BSD compatible name lister, look for dumpbin. if test -n "$ac_tool_prefix"; then for ac_prog in "dumpbin -symbols" "link -dump -symbols" do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_DUMPBIN+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$DUMPBIN"; then ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi DUMPBIN=$ac_cv_prog_DUMPBIN if test -n "$DUMPBIN"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5 $as_echo "$DUMPBIN" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$DUMPBIN" && break done fi if test -z "$DUMPBIN"; then ac_ct_DUMPBIN=$DUMPBIN for ac_prog in "dumpbin -symbols" "link -dump -symbols" do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_DUMPBIN"; then ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN if test -n "$ac_ct_DUMPBIN"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5 $as_echo "$ac_ct_DUMPBIN" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_DUMPBIN" && break done if test "x$ac_ct_DUMPBIN" = x; then DUMPBIN=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac DUMPBIN=$ac_ct_DUMPBIN fi fi if test "$DUMPBIN" != ":"; then NM="$DUMPBIN" fi fi test -z "$NM" && NM=nm { $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5 $as_echo_n "checking the name lister ($NM) interface... " >&6; } if test "${lt_cv_nm_interface+set}" = set; then : $as_echo_n "(cached) " >&6 else lt_cv_nm_interface="BSD nm" echo "int some_variable = 0;" > conftest.$ac_ext (eval echo "\"\$as_me:5133: $ac_compile\"" >&5) (eval "$ac_compile" 2>conftest.err) cat conftest.err >&5 (eval echo "\"\$as_me:5136: $NM \\\"conftest.$ac_objext\\\"\"" >&5) (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) cat conftest.err >&5 (eval echo "\"\$as_me:5139: output\"" >&5) cat conftest.out >&5 if $GREP 'External.*some_variable' conftest.out > /dev/null; then lt_cv_nm_interface="MS dumpbin" fi rm -f conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5 $as_echo "$lt_cv_nm_interface" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5 $as_echo_n "checking whether ln -s works... " >&6; } LN_S=$as_ln_s if test "$LN_S" = "ln -s"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5 $as_echo "no, using $LN_S" >&6; } fi # find the maximum length of command line arguments { $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5 $as_echo_n "checking the maximum length of command line arguments... " >&6; } if test "${lt_cv_sys_max_cmd_len+set}" = set; then : $as_echo_n "(cached) " >&6 else i=0 teststring="ABCD" case $build_os in msdosdjgpp*) # On DJGPP, this test can blow up pretty badly due to problems in libc # (any single argument exceeding 2000 bytes causes a buffer overrun # during glob expansion). Even if it were fixed, the result of this # check would be larger than it should be. lt_cv_sys_max_cmd_len=12288; # 12K is about right ;; gnu*) # Under GNU Hurd, this test is not required because there is # no limit to the length of command line arguments. # Libtool will interpret -1 as no limit whatsoever lt_cv_sys_max_cmd_len=-1; ;; cygwin* | mingw* | cegcc*) # On Win9x/ME, this test blows up -- it succeeds, but takes # about 5 minutes as the teststring grows exponentially. # Worse, since 9x/ME are not pre-emptively multitasking, # you end up with a "frozen" computer, even though with patience # the test eventually succeeds (with a max line length of 256k). # Instead, let's just punt: use the minimum linelength reported by # all of the supported platforms: 8192 (on NT/2K/XP). lt_cv_sys_max_cmd_len=8192; ;; amigaos*) # On AmigaOS with pdksh, this test takes hours, literally. # So we just punt and use a minimum line length of 8192. lt_cv_sys_max_cmd_len=8192; ;; netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) # This has been around since 386BSD, at least. Likely further. if test -x /sbin/sysctl; then lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` elif test -x /usr/sbin/sysctl; then lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` else lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs fi # And add a safety zone lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ;; interix*) # We know the value 262144 and hardcode it with a safety zone (like BSD) lt_cv_sys_max_cmd_len=196608 ;; osf*) # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not # nice to cause kernel panics so lets avoid the loop below. # First set a reasonable default. lt_cv_sys_max_cmd_len=16384 # if test -x /sbin/sysconfig; then case `/sbin/sysconfig -q proc exec_disable_arg_limit` in *1*) lt_cv_sys_max_cmd_len=-1 ;; esac fi ;; sco3.2v5*) lt_cv_sys_max_cmd_len=102400 ;; sysv5* | sco5v6* | sysv4.2uw2*) kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` if test -n "$kargmax"; then lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` else lt_cv_sys_max_cmd_len=32768 fi ;; *) lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` if test -n "$lt_cv_sys_max_cmd_len"; then lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` else # Make teststring a little bigger before we do anything with it. # a 1K string should be a reasonable start. for i in 1 2 3 4 5 6 7 8 ; do teststring=$teststring$teststring done SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} # If test is not a shell built-in, we'll probably end up computing a # maximum length that is only half of the actual maximum length, but # we can't tell. while { test "X"`$SHELL $0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \ = "XX$teststring$teststring"; } >/dev/null 2>&1 && test $i != 17 # 1/2 MB should be enough do i=`expr $i + 1` teststring=$teststring$teststring done # Only check the string length outside the loop. lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` teststring= # Add a significant safety factor because C++ compilers can tack on # massive amounts of additional arguments before passing them to the # linker. It appears as though 1/2 is a usable value. lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` fi ;; esac fi if test -n $lt_cv_sys_max_cmd_len ; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5 $as_echo "$lt_cv_sys_max_cmd_len" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5 $as_echo "none" >&6; } fi max_cmd_len=$lt_cv_sys_max_cmd_len : ${CP="cp -f"} : ${MV="mv -f"} : ${RM="rm -f"} { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5 $as_echo_n "checking whether the shell understands some XSI constructs... " >&6; } # Try some XSI features xsi_shell=no ( _lt_dummy="a/b/c" test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \ = c,a/b,, \ && eval 'test $(( 1 + 1 )) -eq 2 \ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ && xsi_shell=yes { $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5 $as_echo "$xsi_shell" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5 $as_echo_n "checking whether the shell understands \"+=\"... " >&6; } lt_shell_append=no ( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \ >/dev/null 2>&1 \ && lt_shell_append=yes { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5 $as_echo "$lt_shell_append" >&6; } if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then lt_unset=unset else lt_unset=false fi # test EBCDIC or ASCII case `echo X|tr X '\101'` in A) # ASCII based system # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr lt_SP2NL='tr \040 \012' lt_NL2SP='tr \015\012 \040\040' ;; *) # EBCDIC based system lt_SP2NL='tr \100 \n' lt_NL2SP='tr \r\n \100\100' ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5 $as_echo_n "checking for $LD option to reload object files... " >&6; } if test "${lt_cv_ld_reload_flag+set}" = set; then : $as_echo_n "(cached) " >&6 else lt_cv_ld_reload_flag='-r' fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5 $as_echo "$lt_cv_ld_reload_flag" >&6; } reload_flag=$lt_cv_ld_reload_flag case $reload_flag in "" | " "*) ;; *) reload_flag=" $reload_flag" ;; esac reload_cmds='$LD$reload_flag -o $output$reload_objs' case $host_os in darwin*) if test "$GCC" = yes; then reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' else reload_cmds='$LD$reload_flag -o $output$reload_objs' fi ;; esac if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. set dummy ${ac_tool_prefix}objdump; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_OBJDUMP+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$OBJDUMP"; then ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi OBJDUMP=$ac_cv_prog_OBJDUMP if test -n "$OBJDUMP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 $as_echo "$OBJDUMP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_OBJDUMP"; then ac_ct_OBJDUMP=$OBJDUMP # Extract the first word of "objdump", so it can be a program name with args. set dummy objdump; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_OBJDUMP"; then ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_OBJDUMP="objdump" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP if test -n "$ac_ct_OBJDUMP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 $as_echo "$ac_ct_OBJDUMP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_OBJDUMP" = x; then OBJDUMP="false" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac OBJDUMP=$ac_ct_OBJDUMP fi else OBJDUMP="$ac_cv_prog_OBJDUMP" fi test -z "$OBJDUMP" && OBJDUMP=objdump { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5 $as_echo_n "checking how to recognize dependent libraries... " >&6; } if test "${lt_cv_deplibs_check_method+set}" = set; then : $as_echo_n "(cached) " >&6 else lt_cv_file_magic_cmd='$MAGIC_CMD' lt_cv_file_magic_test_file= lt_cv_deplibs_check_method='unknown' # Need to set the preceding variable on all platforms that support # interlibrary dependencies. # 'none' -- dependencies not supported. # `unknown' -- same as none, but documents that we really don't know. # 'pass_all' -- all dependencies passed with no checks. # 'test_compile' -- check by making test program. # 'file_magic [[regex]]' -- check by looking for files in library path # which responds to the $file_magic_cmd with a given extended regex. # If you have `file' or equivalent on your system and you're not sure # whether `pass_all' will *always* work, you probably want this one. case $host_os in aix[4-9]*) lt_cv_deplibs_check_method=pass_all ;; beos*) lt_cv_deplibs_check_method=pass_all ;; bsdi[45]*) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' lt_cv_file_magic_cmd='/usr/bin/file -L' lt_cv_file_magic_test_file=/shlib/libc.so ;; cygwin*) # func_win32_libid is a shell function defined in ltmain.sh lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' lt_cv_file_magic_cmd='func_win32_libid' ;; mingw* | pw32*) # Base MSYS/MinGW do not provide the 'file' command needed by # func_win32_libid shell function, so use a weaker test based on 'objdump', # unless we find 'file', for example because we are cross-compiling. if ( file / ) >/dev/null 2>&1; then lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' lt_cv_file_magic_cmd='func_win32_libid' else lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' lt_cv_file_magic_cmd='$OBJDUMP -f' fi ;; cegcc) # use the weaker test based on 'objdump'. See mingw*. lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' lt_cv_file_magic_cmd='$OBJDUMP -f' ;; darwin* | rhapsody*) lt_cv_deplibs_check_method=pass_all ;; freebsd* | dragonfly*) if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then case $host_cpu in i*86 ) # Not sure whether the presence of OpenBSD here was a mistake. # Let's accept both of them until this is cleared up. lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ;; esac else lt_cv_deplibs_check_method=pass_all fi ;; gnu*) lt_cv_deplibs_check_method=pass_all ;; hpux10.20* | hpux11*) lt_cv_file_magic_cmd=/usr/bin/file case $host_cpu in ia64*) lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so ;; hppa*64*) lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]' lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl ;; *) lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' lt_cv_file_magic_test_file=/usr/lib/libc.sl ;; esac ;; interix[3-9]*) # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' ;; irix5* | irix6* | nonstopux*) case $LD in *-32|*"-32 ") libmagic=32-bit;; *-n32|*"-n32 ") libmagic=N32;; *-64|*"-64 ") libmagic=64-bit;; *) libmagic=never-match;; esac lt_cv_deplibs_check_method=pass_all ;; # This must be Linux ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu) lt_cv_deplibs_check_method=pass_all ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' fi ;; newos6*) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=/usr/lib/libnls.so ;; *nto* | *qnx*) lt_cv_deplibs_check_method=pass_all ;; openbsd*) if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' fi ;; osf3* | osf4* | osf5*) lt_cv_deplibs_check_method=pass_all ;; rdos*) lt_cv_deplibs_check_method=pass_all ;; solaris*) lt_cv_deplibs_check_method=pass_all ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) lt_cv_deplibs_check_method=pass_all ;; sysv4 | sysv4.3*) case $host_vendor in motorola) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ;; ncr) lt_cv_deplibs_check_method=pass_all ;; sequent) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;; sni) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" lt_cv_file_magic_test_file=/lib/libc.so ;; siemens) lt_cv_deplibs_check_method=pass_all ;; pc) lt_cv_deplibs_check_method=pass_all ;; esac ;; tpf*) lt_cv_deplibs_check_method=pass_all ;; esac fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5 $as_echo "$lt_cv_deplibs_check_method" >&6; } file_magic_cmd=$lt_cv_file_magic_cmd deplibs_check_method=$lt_cv_deplibs_check_method test -z "$deplibs_check_method" && deplibs_check_method=unknown if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. set dummy ${ac_tool_prefix}ar; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_AR+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$AR"; then ac_cv_prog_AR="$AR" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_AR="${ac_tool_prefix}ar" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi AR=$ac_cv_prog_AR if test -n "$AR"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 $as_echo "$AR" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_AR"; then ac_ct_AR=$AR # Extract the first word of "ar", so it can be a program name with args. set dummy ar; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_AR+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_AR"; then ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_AR="ar" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_AR=$ac_cv_prog_ac_ct_AR if test -n "$ac_ct_AR"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 $as_echo "$ac_ct_AR" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_AR" = x; then AR="false" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac AR=$ac_ct_AR fi else AR="$ac_cv_prog_AR" fi test -z "$AR" && AR=ar test -z "$AR_FLAGS" && AR_FLAGS=cru if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_STRIP+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 $as_echo "$STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_STRIP"; then ac_ct_STRIP=$STRIP # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_STRIP"; then ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_STRIP="strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 $as_echo "$ac_ct_STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_STRIP" = x; then STRIP=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac STRIP=$ac_ct_STRIP fi else STRIP="$ac_cv_prog_STRIP" fi test -z "$STRIP" && STRIP=: if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. set dummy ${ac_tool_prefix}ranlib; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_RANLIB+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$RANLIB"; then ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi RANLIB=$ac_cv_prog_RANLIB if test -n "$RANLIB"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 $as_echo "$RANLIB" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_RANLIB"; then ac_ct_RANLIB=$RANLIB # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_RANLIB"; then ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_RANLIB="ranlib" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB if test -n "$ac_ct_RANLIB"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 $as_echo "$ac_ct_RANLIB" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_RANLIB" = x; then RANLIB=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac RANLIB=$ac_ct_RANLIB fi else RANLIB="$ac_cv_prog_RANLIB" fi test -z "$RANLIB" && RANLIB=: # Determine commands to create old-style static archives. old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' old_postinstall_cmds='chmod 644 $oldlib' old_postuninstall_cmds= if test -n "$RANLIB"; then case $host_os in openbsd*) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" ;; *) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" ;; esac old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" fi # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} # If no C compiler flags were specified, use CFLAGS. LTCFLAGS=${LTCFLAGS-"$CFLAGS"} # Allow CC to be a program name with arguments. compiler=$CC # Check for command to grab the raw symbol name followed by C symbol from nm. { $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5 $as_echo_n "checking command to parse $NM output from $compiler object... " >&6; } if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then : $as_echo_n "(cached) " >&6 else # These are sane defaults that work on at least a few old systems. # [They come from Ultrix. What could be older than Ultrix?!! ;)] # Character class describing NM global symbol codes. symcode='[BCDEGRST]' # Regexp to match symbols that can be accessed directly from C. sympat='\([_A-Za-z][_A-Za-z0-9]*\)' # Define system-specific variables. case $host_os in aix*) symcode='[BCDT]' ;; cygwin* | mingw* | pw32* | cegcc*) symcode='[ABCDGISTW]' ;; hpux*) if test "$host_cpu" = ia64; then symcode='[ABCDEGRST]' fi ;; irix* | nonstopux*) symcode='[BCDEGRST]' ;; osf*) symcode='[BCDEGQRST]' ;; solaris*) symcode='[BDRT]' ;; sco3.2v5*) symcode='[DT]' ;; sysv4.2uw2*) symcode='[DT]' ;; sysv5* | sco5v6* | unixware* | OpenUNIX*) symcode='[ABDT]' ;; sysv4) symcode='[DFNSTU]' ;; esac # If we're using GNU nm, then use its standard symbol codes. case `$NM -V 2>&1` in *GNU* | *'with BFD'*) symcode='[ABCDGIRSTW]' ;; esac # Transform an extracted symbol line into a proper C declaration. # Some systems (esp. on ia64) link data and code symbols differently, # so use this general approach. lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" # Transform an extracted symbol line into symbol name and symbol address lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'" lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'" # Handle CRLF in mingw tool chain opt_cr= case $build_os in mingw*) opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp ;; esac # Try without a prefix underscore, then with it. for ac_symprfx in "" "_"; do # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. symxfrm="\\1 $ac_symprfx\\2 \\2" # Write the raw and C identifiers. if test "$lt_cv_nm_interface" = "MS dumpbin"; then # Fake it for dumpbin and say T for any non-static function # and D for any global variable. # Also find C++ and __fastcall symbols from MSVC++, # which start with @ or ?. lt_cv_sys_global_symbol_pipe="$AWK '"\ " {last_section=section; section=\$ 3};"\ " /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ " \$ 0!~/External *\|/{next};"\ " / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ " {if(hide[section]) next};"\ " {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ " {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ " s[1]~/^[@?]/{print s[1], s[1]; next};"\ " s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ " ' prfx=^$ac_symprfx" else lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" fi # Check to see that the pipe works correctly. pipe_works=no rm -f conftest* cat > conftest.$ac_ext <<_LT_EOF #ifdef __cplusplus extern "C" { #endif char nm_test_var; void nm_test_func(void); void nm_test_func(void){} #ifdef __cplusplus } #endif int main(){nm_test_var='a';nm_test_func();return(0);} _LT_EOF if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then # Now try to grab the symbols. nlist=conftest.nm if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\""; } >&5 (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && test -s "$nlist"; then # Try sorting and uniquifying the output. if sort "$nlist" | uniq > "$nlist"T; then mv -f "$nlist"T "$nlist" else rm -f "$nlist"T fi # Make sure that we snagged all the symbols we need. if $GREP ' nm_test_var$' "$nlist" >/dev/null; then if $GREP ' nm_test_func$' "$nlist" >/dev/null; then cat <<_LT_EOF > conftest.$ac_ext #ifdef __cplusplus extern "C" { #endif _LT_EOF # Now generate the symbol file. eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' cat <<_LT_EOF >> conftest.$ac_ext /* The mapping between symbol names and symbols. */ const struct { const char *name; void *address; } lt__PROGRAM__LTX_preloaded_symbols[] = { { "@PROGRAM@", (void *) 0 }, _LT_EOF $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext cat <<\_LT_EOF >> conftest.$ac_ext {0, (void *) 0} }; /* This works around a problem in FreeBSD linker */ #ifdef FREEBSD_WORKAROUND static const void *lt_preloaded_setup() { return lt__PROGRAM__LTX_preloaded_symbols; } #endif #ifdef __cplusplus } #endif _LT_EOF # Now try linking the two files. mv conftest.$ac_objext conftstm.$ac_objext lt_save_LIBS="$LIBS" lt_save_CFLAGS="$CFLAGS" LIBS="conftstm.$ac_objext" CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 (eval $ac_link) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && test -s conftest${ac_exeext}; then pipe_works=yes fi LIBS="$lt_save_LIBS" CFLAGS="$lt_save_CFLAGS" else echo "cannot find nm_test_func in $nlist" >&5 fi else echo "cannot find nm_test_var in $nlist" >&5 fi else echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 fi else echo "$progname: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -rf conftest* conftst* # Do not use the global_symbol_pipe unless it works. if test "$pipe_works" = yes; then break else lt_cv_sys_global_symbol_pipe= fi done fi if test -z "$lt_cv_sys_global_symbol_pipe"; then lt_cv_sys_global_symbol_to_cdecl= fi if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5 $as_echo "failed" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 $as_echo "ok" >&6; } fi # Check whether --enable-libtool-lock was given. if test "${enable_libtool_lock+set}" = set; then : enableval=$enable_libtool_lock; fi test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes # Some flags need to be propagated to the compiler or linker for good # libtool support. case $host in ia64-*-hpux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then case `/usr/bin/file conftest.$ac_objext` in *ELF-32*) HPUX_IA64_MODE="32" ;; *ELF-64*) HPUX_IA64_MODE="64" ;; esac fi rm -rf conftest* ;; *-*-irix6*) # Find out which ABI we are using. echo '#line 6344 "configure"' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then if test "$lt_cv_prog_gnu_ld" = yes; then case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -melf32bsmip" ;; *N32*) LD="${LD-ld} -melf32bmipn32" ;; *64-bit*) LD="${LD-ld} -melf64bmip" ;; esac else case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -32" ;; *N32*) LD="${LD-ld} -n32" ;; *64-bit*) LD="${LD-ld} -64" ;; esac fi fi rm -rf conftest* ;; x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ s390*-*linux*|s390*-*tpf*|sparc*-*linux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then case `/usr/bin/file conftest.o` in *32-bit*) case $host in x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_i386_fbsd" ;; x86_64-*linux*) LD="${LD-ld} -m elf_i386" ;; ppc64-*linux*|powerpc64-*linux*) LD="${LD-ld} -m elf32ppclinux" ;; s390x-*linux*) LD="${LD-ld} -m elf_s390" ;; sparc64-*linux*) LD="${LD-ld} -m elf32_sparc" ;; esac ;; *64-bit*) case $host in x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_x86_64_fbsd" ;; x86_64-*linux*) LD="${LD-ld} -m elf_x86_64" ;; ppc*-*linux*|powerpc*-*linux*) LD="${LD-ld} -m elf64ppc" ;; s390*-*linux*|s390*-*tpf*) LD="${LD-ld} -m elf64_s390" ;; sparc*-*linux*) LD="${LD-ld} -m elf64_sparc" ;; esac ;; esac fi rm -rf conftest* ;; *-*-sco3.2v5*) # On SCO OpenServer 5, we need -belf to get full-featured binaries. SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5 $as_echo_n "checking whether the C compiler needs -belf... " >&6; } if test "${lt_cv_cc_needs_belf+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : lt_cv_cc_needs_belf=yes else lt_cv_cc_needs_belf=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5 $as_echo "$lt_cv_cc_needs_belf" >&6; } if test x"$lt_cv_cc_needs_belf" != x"yes"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf CFLAGS="$SAVE_CFLAGS" fi ;; sparc*-*solaris*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then case `/usr/bin/file conftest.o` in *64-bit*) case $lt_cv_prog_gnu_ld in yes*) LD="${LD-ld} -m elf64_sparc" ;; *) if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then LD="${LD-ld} -64" fi ;; esac ;; esac fi rm -rf conftest* ;; esac need_locks="$enable_libtool_lock" case $host_os in rhapsody* | darwin*) if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_DSYMUTIL+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$DSYMUTIL"; then ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi DSYMUTIL=$ac_cv_prog_DSYMUTIL if test -n "$DSYMUTIL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5 $as_echo "$DSYMUTIL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_DSYMUTIL"; then ac_ct_DSYMUTIL=$DSYMUTIL # Extract the first word of "dsymutil", so it can be a program name with args. set dummy dsymutil; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_DSYMUTIL"; then ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL if test -n "$ac_ct_DSYMUTIL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5 $as_echo "$ac_ct_DSYMUTIL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_DSYMUTIL" = x; then DSYMUTIL=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac DSYMUTIL=$ac_ct_DSYMUTIL fi else DSYMUTIL="$ac_cv_prog_DSYMUTIL" fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. set dummy ${ac_tool_prefix}nmedit; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_NMEDIT+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$NMEDIT"; then ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi NMEDIT=$ac_cv_prog_NMEDIT if test -n "$NMEDIT"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5 $as_echo "$NMEDIT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_NMEDIT"; then ac_ct_NMEDIT=$NMEDIT # Extract the first word of "nmedit", so it can be a program name with args. set dummy nmedit; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_NMEDIT"; then ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_NMEDIT="nmedit" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT if test -n "$ac_ct_NMEDIT"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5 $as_echo "$ac_ct_NMEDIT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_NMEDIT" = x; then NMEDIT=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac NMEDIT=$ac_ct_NMEDIT fi else NMEDIT="$ac_cv_prog_NMEDIT" fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. set dummy ${ac_tool_prefix}lipo; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_LIPO+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$LIPO"; then ac_cv_prog_LIPO="$LIPO" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_LIPO="${ac_tool_prefix}lipo" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi LIPO=$ac_cv_prog_LIPO if test -n "$LIPO"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5 $as_echo "$LIPO" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_LIPO"; then ac_ct_LIPO=$LIPO # Extract the first word of "lipo", so it can be a program name with args. set dummy lipo; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_LIPO+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_LIPO"; then ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_LIPO="lipo" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO if test -n "$ac_ct_LIPO"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5 $as_echo "$ac_ct_LIPO" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_LIPO" = x; then LIPO=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac LIPO=$ac_ct_LIPO fi else LIPO="$ac_cv_prog_LIPO" fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. set dummy ${ac_tool_prefix}otool; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_OTOOL+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$OTOOL"; then ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_OTOOL="${ac_tool_prefix}otool" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi OTOOL=$ac_cv_prog_OTOOL if test -n "$OTOOL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5 $as_echo "$OTOOL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_OTOOL"; then ac_ct_OTOOL=$OTOOL # Extract the first word of "otool", so it can be a program name with args. set dummy otool; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_OTOOL+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_OTOOL"; then ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_OTOOL="otool" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL if test -n "$ac_ct_OTOOL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5 $as_echo "$ac_ct_OTOOL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_OTOOL" = x; then OTOOL=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac OTOOL=$ac_ct_OTOOL fi else OTOOL="$ac_cv_prog_OTOOL" fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. set dummy ${ac_tool_prefix}otool64; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_OTOOL64+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$OTOOL64"; then ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi OTOOL64=$ac_cv_prog_OTOOL64 if test -n "$OTOOL64"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5 $as_echo "$OTOOL64" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_OTOOL64"; then ac_ct_OTOOL64=$OTOOL64 # Extract the first word of "otool64", so it can be a program name with args. set dummy otool64; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_OTOOL64+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_OTOOL64"; then ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_OTOOL64="otool64" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 if test -n "$ac_ct_OTOOL64"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5 $as_echo "$ac_ct_OTOOL64" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_OTOOL64" = x; then OTOOL64=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac OTOOL64=$ac_ct_OTOOL64 fi else OTOOL64="$ac_cv_prog_OTOOL64" fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5 $as_echo_n "checking for -single_module linker flag... " >&6; } if test "${lt_cv_apple_cc_single_mod+set}" = set; then : $as_echo_n "(cached) " >&6 else lt_cv_apple_cc_single_mod=no if test -z "${LT_MULTI_MODULE}"; then # By default we will add the -single_module flag. You can override # by either setting the environment variable LT_MULTI_MODULE # non-empty at configure time, or by adding -multi_module to the # link flags. rm -rf libconftest.dylib* echo "int foo(void){return 1;}" > conftest.c echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ -dynamiclib -Wl,-single_module conftest.c" >&5 $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err _lt_result=$? if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then lt_cv_apple_cc_single_mod=yes else cat conftest.err >&5 fi rm -rf libconftest.dylib* rm -f conftest.* fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5 $as_echo "$lt_cv_apple_cc_single_mod" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5 $as_echo_n "checking for -exported_symbols_list linker flag... " >&6; } if test "${lt_cv_ld_exported_symbols_list+set}" = set; then : $as_echo_n "(cached) " >&6 else lt_cv_ld_exported_symbols_list=no save_LDFLAGS=$LDFLAGS echo "_main" > conftest.sym LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : lt_cv_ld_exported_symbols_list=yes else lt_cv_ld_exported_symbols_list=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LDFLAGS="$save_LDFLAGS" fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5 $as_echo "$lt_cv_ld_exported_symbols_list" >&6; } case $host_os in rhapsody* | darwin1.[012]) _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; darwin1.*) _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; darwin*) # darwin 5.x on # if running on 10.5 or later, the deployment target defaults # to the OS version, if on x86, and 10.4, the deployment # target defaults to 10.4. Don't you love it? case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in 10.0,*86*-darwin8*|10.0,*-darwin[91]*) _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; 10.[012]*) _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; 10.*) _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; esac ;; esac if test "$lt_cv_apple_cc_single_mod" = "yes"; then _lt_dar_single_mod='$single_module' fi if test "$lt_cv_ld_exported_symbols_list" = "yes"; then _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' else _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' fi if test "$DSYMUTIL" != ":"; then _lt_dsymutil='~$DSYMUTIL $lib || :' else _lt_dsymutil= fi ;; esac ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 $as_echo_n "checking how to run the C preprocessor... " >&6; } # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= fi if test -z "$CPP"; then if test "${ac_cv_prog_CPP+set}" = set; then : $as_echo_n "(cached) " >&6 else # Double quotes because CPP needs to be expanded for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" do ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : else # Broken: fails on valid input. continue fi rm -f conftest.err conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : # Broken: success on invalid input. continue else # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.err conftest.$ac_ext if $ac_preproc_ok; then : break fi done ac_cv_prog_CPP=$CPP fi CPP=$ac_cv_prog_CPP else ac_cv_prog_CPP=$CPP fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 $as_echo "$CPP" >&6; } ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : else # Broken: fails on valid input. continue fi rm -f conftest.err conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : # Broken: success on invalid input. continue else # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.err conftest.$ac_ext if $ac_preproc_ok; then : else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error "C preprocessor \"$CPP\" fails sanity check See \`config.log' for more details." "$LINENO" 5; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 $as_echo_n "checking for ANSI C header files... " >&6; } if test "${ac_cv_header_stdc+set}" = set; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #include #include int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_header_stdc=yes else ac_cv_header_stdc=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "memchr" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "free" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. if test "$cross_compiling" = yes; then : : else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #if ((' ' & 0x0FF) == 0x020) # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) #else # define ISLOWER(c) \ (('a' <= (c) && (c) <= 'i') \ || ('j' <= (c) && (c) <= 'r') \ || ('s' <= (c) && (c) <= 'z')) # define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) #endif #define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) int main () { int i; for (i = 0; i < 256; i++) if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) return 2; return 0; } _ACEOF if ac_fn_c_try_run "$LINENO"; then : else ac_cv_header_stdc=no fi rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ conftest.$ac_objext conftest.beam conftest.$ac_ext fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 $as_echo "$ac_cv_header_stdc" >&6; } if test $ac_cv_header_stdc = yes; then $as_echo "#define STDC_HEADERS 1" >>confdefs.h fi # On IRIX 5.3, sys/types and inttypes.h are conflicting. for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ inttypes.h stdint.h unistd.h do : as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default " eval as_val=\$$as_ac_Header if test "x$as_val" = x""yes; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done for ac_header in dlfcn.h do : ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default " if test "x$ac_cv_header_dlfcn_h" = x""yes; then : cat >>confdefs.h <<_ACEOF #define HAVE_DLFCN_H 1 _ACEOF fi done # Set options enable_dlopen=no enable_win32_dll=no # Check whether --enable-shared was given. if test "${enable_shared+set}" = set; then : enableval=$enable_shared; p=${PACKAGE-default} case $enableval in yes) enable_shared=yes ;; no) enable_shared=no ;; *) enable_shared=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_shared=yes fi done IFS="$lt_save_ifs" ;; esac else enable_shared=yes fi # Check whether --enable-static was given. if test "${enable_static+set}" = set; then : enableval=$enable_static; p=${PACKAGE-default} case $enableval in yes) enable_static=yes ;; no) enable_static=no ;; *) enable_static=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_static=yes fi done IFS="$lt_save_ifs" ;; esac else enable_static=yes fi # Check whether --with-pic was given. if test "${with_pic+set}" = set; then : withval=$with_pic; pic_mode="$withval" else pic_mode=default fi test -z "$pic_mode" && pic_mode=default # Check whether --enable-fast-install was given. if test "${enable_fast_install+set}" = set; then : enableval=$enable_fast_install; p=${PACKAGE-default} case $enableval in yes) enable_fast_install=yes ;; no) enable_fast_install=no ;; *) enable_fast_install=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_fast_install=yes fi done IFS="$lt_save_ifs" ;; esac else enable_fast_install=yes fi # This can be used to rebuild libtool when needed LIBTOOL_DEPS="$ltmain" # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' test -z "$LN_S" && LN_S="ln -s" if test -n "${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5 $as_echo_n "checking for objdir... " >&6; } if test "${lt_cv_objdir+set}" = set; then : $as_echo_n "(cached) " >&6 else rm -f .libs 2>/dev/null mkdir .libs 2>/dev/null if test -d .libs; then lt_cv_objdir=.libs else # MS-DOS does not allow filenames that begin with a dot. lt_cv_objdir=_libs fi rmdir .libs 2>/dev/null fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5 $as_echo "$lt_cv_objdir" >&6; } objdir=$lt_cv_objdir cat >>confdefs.h <<_ACEOF #define LT_OBJDIR "$lt_cv_objdir/" _ACEOF case $host_os in aix3*) # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi ;; esac # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. sed_quote_subst='s/\(["`$\\]\)/\\\1/g' # Same as above, but do not quote variable references. double_quote_subst='s/\(["`\\]\)/\\\1/g' # Sed substitution to delay expansion of an escaped shell variable in a # double_quote_subst'ed string. delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' # Sed substitution to delay expansion of an escaped single quote. delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' # Sed substitution to avoid accidental globbing in evaled expressions no_glob_subst='s/\*/\\\*/g' # Global variables: ofile=libtool can_build_shared=yes # All known linkers require a `.a' archive for static linking (except MSVC, # which needs '.lib'). libext=a with_gnu_ld="$lt_cv_prog_gnu_ld" old_CC="$CC" old_CFLAGS="$CFLAGS" # Set sane defaults for various variables test -z "$CC" && CC=cc test -z "$LTCC" && LTCC=$CC test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS test -z "$LD" && LD=ld test -z "$ac_objext" && ac_objext=o for cc_temp in $compiler""; do case $cc_temp in compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; \-*) ;; *) break;; esac done cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` # Only perform the check for file, if the check method requires it test -z "$MAGIC_CMD" && MAGIC_CMD=file case $deplibs_check_method in file_magic*) if test "$file_magic_cmd" = '$MAGIC_CMD'; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5 $as_echo_n "checking for ${ac_tool_prefix}file... " >&6; } if test "${lt_cv_path_MAGIC_CMD+set}" = set; then : $as_echo_n "(cached) " >&6 else case $MAGIC_CMD in [\\/*] | ?:[\\/]*) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ;; *) lt_save_MAGIC_CMD="$MAGIC_CMD" lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" for ac_dir in $ac_dummy; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/${ac_tool_prefix}file; then lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then : else cat <<_LT_EOF 1>&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org _LT_EOF fi ;; esac fi break fi done IFS="$lt_save_ifs" MAGIC_CMD="$lt_save_MAGIC_CMD" ;; esac fi MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 $as_echo "$MAGIC_CMD" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test -z "$lt_cv_path_MAGIC_CMD"; then if test -n "$ac_tool_prefix"; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5 $as_echo_n "checking for file... " >&6; } if test "${lt_cv_path_MAGIC_CMD+set}" = set; then : $as_echo_n "(cached) " >&6 else case $MAGIC_CMD in [\\/*] | ?:[\\/]*) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ;; *) lt_save_MAGIC_CMD="$MAGIC_CMD" lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" for ac_dir in $ac_dummy; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/file; then lt_cv_path_MAGIC_CMD="$ac_dir/file" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then : else cat <<_LT_EOF 1>&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org _LT_EOF fi ;; esac fi break fi done IFS="$lt_save_ifs" MAGIC_CMD="$lt_save_MAGIC_CMD" ;; esac fi MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 $as_echo "$MAGIC_CMD" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi else MAGIC_CMD=: fi fi fi ;; esac # Use C for the default configuration in the libtool script lt_save_CC="$CC" ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu # Source file extension for C test sources. ac_ext=c # Object file extension for compiled C test sources. objext=o objext=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;" # Code to be used in simple link tests lt_simple_link_test_code='int main(){return(0);}' # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} # If no C compiler flags were specified, use CFLAGS. LTCFLAGS=${LTCFLAGS-"$CFLAGS"} # Allow CC to be a program name with arguments. compiler=$CC # Save the default compiler, since it gets overwritten when the other # tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. compiler_DEFAULT=$CC # save warnings/boilerplate of simple test code ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" >conftest.$ac_ext eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_compiler_boilerplate=`cat conftest.err` $RM conftest* ac_outfile=conftest.$ac_objext echo "$lt_simple_link_test_code" >conftest.$ac_ext eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_linker_boilerplate=`cat conftest.err` $RM -r conftest* ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... if test -n "$compiler"; then lt_prog_compiler_no_builtin_flag= if test "$GCC" = yes; then lt_prog_compiler_no_builtin_flag=' -fno-builtin' { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 $as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_rtti_exceptions=no ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-fno-rtti -fno-exceptions" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:7874: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 echo "$as_me:7878: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_rtti_exceptions=yes fi fi $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 $as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" else : fi fi lt_prog_compiler_wl= lt_prog_compiler_pic= lt_prog_compiler_static= { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 $as_echo_n "checking for $compiler option to produce PIC... " >&6; } if test "$GCC" = yes; then lt_prog_compiler_wl='-Wl,' lt_prog_compiler_static='-static' case $host_os in aix*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor lt_prog_compiler_static='-Bstatic' fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support lt_prog_compiler_pic='-fPIC' ;; m68k) # FIXME: we need at least 68020 code to build shared libraries, but # adding the `-m68020' flag to GCC prevents building anything better, # like `-m68040'. lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' ;; esac ;; beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries lt_prog_compiler_pic='-DDLL_EXPORT' ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files lt_prog_compiler_pic='-fno-common' ;; hpux*) # PIC is the default for 64-bit PA HP-UX, but not for 32-bit # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag # sets the default TLS model and affects inlining. case $host_cpu in hppa*64*) # +Z the default ;; *) lt_prog_compiler_pic='-fPIC' ;; esac ;; interix[3-9]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. # Instead, we relocate shared libraries at runtime. ;; msdosdjgpp*) # Just because we use GCC doesn't mean we suddenly get shared libraries # on systems that don't support them. lt_prog_compiler_can_build_shared=no enable_shared=no ;; *nto* | *qnx*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. lt_prog_compiler_pic='-fPIC -shared' ;; sysv4*MP*) if test -d /usr/nec; then lt_prog_compiler_pic=-Kconform_pic fi ;; *) lt_prog_compiler_pic='-fPIC' ;; esac else # PORTME Check for flag to pass linker flags through the system compiler. case $host_os in aix*) lt_prog_compiler_wl='-Wl,' if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor lt_prog_compiler_static='-Bstatic' else lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' fi ;; mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). lt_prog_compiler_pic='-DDLL_EXPORT' ;; hpux9* | hpux10* | hpux11*) lt_prog_compiler_wl='-Wl,' # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) lt_prog_compiler_pic='+Z' ;; esac # Is there a better lt_prog_compiler_static that works with the bundled CC? lt_prog_compiler_static='${wl}-a ${wl}archive' ;; irix5* | irix6* | nonstopux*) lt_prog_compiler_wl='-Wl,' # PIC (with -KPIC) is the default. lt_prog_compiler_static='-non_shared' ;; linux* | k*bsd*-gnu | kopensolaris*-gnu) case $cc_basename in # old Intel for x86_64 which still supported -KPIC. ecc*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-static' ;; # icc used to be incompatible with GCC. # ICC 10 doesn't accept -KPIC any more. icc* | ifort*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-fPIC' lt_prog_compiler_static='-static' ;; # Lahey Fortran 8.1. lf95*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='--shared' lt_prog_compiler_static='--static' ;; pgcc* | pgf77* | pgf90* | pgf95*) # Portland Group compilers (*not* the Pentium gcc compiler, # which looks to be a dead project) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-fpic' lt_prog_compiler_static='-Bstatic' ;; ccc*) lt_prog_compiler_wl='-Wl,' # All Alpha code is PIC. lt_prog_compiler_static='-non_shared' ;; xl*) # IBM XL C 8.0/Fortran 10.1 on PPC lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-qpic' lt_prog_compiler_static='-qstaticlink' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' lt_prog_compiler_wl='-Wl,' ;; *Sun\ F*) # Sun Fortran 8.3 passes all unrecognized flags to the linker lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' lt_prog_compiler_wl='' ;; esac ;; esac ;; newsos6) lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' ;; *nto* | *qnx*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. lt_prog_compiler_pic='-fPIC -shared' ;; osf3* | osf4* | osf5*) lt_prog_compiler_wl='-Wl,' # All OSF/1 code is PIC. lt_prog_compiler_static='-non_shared' ;; rdos*) lt_prog_compiler_static='-non_shared' ;; solaris*) lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' case $cc_basename in f77* | f90* | f95*) lt_prog_compiler_wl='-Qoption ld ';; *) lt_prog_compiler_wl='-Wl,';; esac ;; sunos4*) lt_prog_compiler_wl='-Qoption ld ' lt_prog_compiler_pic='-PIC' lt_prog_compiler_static='-Bstatic' ;; sysv4 | sysv4.2uw2* | sysv4.3*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' ;; sysv4*MP*) if test -d /usr/nec ;then lt_prog_compiler_pic='-Kconform_pic' lt_prog_compiler_static='-Bstatic' fi ;; sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' ;; unicos*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_can_build_shared=no ;; uts4*) lt_prog_compiler_pic='-pic' lt_prog_compiler_static='-Bstatic' ;; *) lt_prog_compiler_can_build_shared=no ;; esac fi case $host_os in # For platforms which do not support PIC, -DPIC is meaningless: *djgpp*) lt_prog_compiler_pic= ;; *) lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic" >&5 $as_echo "$lt_prog_compiler_pic" >&6; } # # Check to make sure the PIC flag actually works. # if test -n "$lt_prog_compiler_pic"; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 $as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } if test "${lt_cv_prog_compiler_pic_works+set}" = set; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_pic_works=no ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="$lt_prog_compiler_pic -DPIC" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:8213: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 echo "$as_me:8217: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_pic_works=yes fi fi $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5 $as_echo "$lt_cv_prog_compiler_pic_works" >&6; } if test x"$lt_cv_prog_compiler_pic_works" = xyes; then case $lt_prog_compiler_pic in "" | " "*) ;; *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; esac else lt_prog_compiler_pic= lt_prog_compiler_can_build_shared=no fi fi # # Check to make sure the static flag actually works. # wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 $as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } if test "${lt_cv_prog_compiler_static_works+set}" = set; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_static_works=no save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS $lt_tmp_static_flag" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then # The linker can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&5 $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_static_works=yes fi else lt_cv_prog_compiler_static_works=yes fi fi $RM -r conftest* LDFLAGS="$save_LDFLAGS" fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5 $as_echo "$lt_cv_prog_compiler_static_works" >&6; } if test x"$lt_cv_prog_compiler_static_works" = xyes; then : else lt_prog_compiler_static= fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } if test "${lt_cv_prog_compiler_c_o+set}" = set; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_c_o=no $RM -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:8318: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 echo "$as_me:8322: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o=yes fi fi chmod u+w . 2>&5 $RM conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files $RM out/* && rmdir out cd .. $RM -r conftest $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 $as_echo "$lt_cv_prog_compiler_c_o" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } if test "${lt_cv_prog_compiler_c_o+set}" = set; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_c_o=no $RM -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:8373: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 echo "$as_me:8377: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o=yes fi fi chmod u+w . 2>&5 $RM conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files $RM out/* && rmdir out cd .. $RM -r conftest $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 $as_echo "$lt_cv_prog_compiler_c_o" >&6; } hard_links="nottested" if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then # do not overwrite the value of need_locks provided by the user { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 $as_echo_n "checking if we can lock with hard links... " >&6; } hard_links=yes $RM conftest* ln conftest.a conftest.b 2>/dev/null && hard_links=no touch conftest.a ln conftest.a conftest.b 2>&5 || hard_links=no ln conftest.a conftest.b 2>/dev/null && hard_links=no { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 $as_echo "$hard_links" >&6; } if test "$hard_links" = no; then { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 $as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} need_locks=warn fi else need_locks=no fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 $as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } runpath_var= allow_undefined_flag= always_export_symbols=no archive_cmds= archive_expsym_cmds= compiler_needs_object=no enable_shared_with_static_runtimes=no export_dynamic_flag_spec= export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' hardcode_automatic=no hardcode_direct=no hardcode_direct_absolute=no hardcode_libdir_flag_spec= hardcode_libdir_flag_spec_ld= hardcode_libdir_separator= hardcode_minus_L=no hardcode_shlibpath_var=unsupported inherit_rpath=no link_all_deplibs=unknown module_cmds= module_expsym_cmds= old_archive_from_new_cmds= old_archive_from_expsyms_cmds= thread_safe_flag_spec= whole_archive_flag_spec= # include_expsyms should be a list of space-separated symbols to be *always* # included in the symbol list include_expsyms= # exclude_expsyms can be an extended regexp of symbols to exclude # it will be wrapped by ` (' and `)$', so one must not match beginning or # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', # as well as any symbol that contains `d'. exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out # platforms (ab)use it in PIC code, but their linkers get confused if # the symbol is explicitly referenced. Since portable code cannot # rely on this symbol name, it's probably fine to never include it in # preloaded symbol tables. # Exclude shared library initialization/finalization symbols. extract_expsyms_cmds= case $host_os in cygwin* | mingw* | pw32* | cegcc*) # FIXME: the MSVC++ port hasn't been tested in a loooong time # When not using gcc, we currently assume that we are using # Microsoft Visual C++. if test "$GCC" != yes; then with_gnu_ld=no fi ;; interix*) # we just hope/assume this is gcc and not c89 (= MSVC++) with_gnu_ld=yes ;; openbsd*) with_gnu_ld=no ;; linux* | k*bsd*-gnu) link_all_deplibs=no ;; esac ld_shlibs=yes if test "$with_gnu_ld" = yes; then # If archive_cmds runs LD, not CC, wlarc should be empty wlarc='${wl}' # Set some defaults for GNU ld with shared library support. These # are reset later if shared libraries are not supported. Putting them # here allows them to be overridden if necessary. runpath_var=LD_RUN_PATH hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' export_dynamic_flag_spec='${wl}--export-dynamic' # ancient GNU ld didn't support --whole-archive et. al. if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else whole_archive_flag_spec= fi supports_anon_versioning=no case `$LD -v 2>&1` in *GNU\ gold*) supports_anon_versioning=yes ;; *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... *\ 2.11.*) ;; # other 2.11 versions *) supports_anon_versioning=yes ;; esac # See if GNU ld supports shared libraries. case $host_os in aix[3-9]*) # On AIX/PPC, the GNU linker is very broken if test "$host_cpu" != ia64; then ld_shlibs=no cat <<_LT_EOF 1>&2 *** Warning: the GNU linker, at least up to release 2.9.1, is reported *** to be unable to reliably create shared libraries on AIX. *** Therefore, libtool is disabling shared libraries support. If you *** really care for shared libraries, you may want to modify your PATH *** so that a non-GNU linker is found, and then restart. _LT_EOF fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='' ;; m68k) archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes ;; esac ;; beos*) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then allow_undefined_flag=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else ld_shlibs=no fi ;; cygwin* | mingw* | pw32* | cegcc*) # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, # as there is no search path for DLLs. hardcode_libdir_flag_spec='-L$libdir' allow_undefined_flag=unsupported always_export_symbols=no enable_shared_with_static_runtimes=yes export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then cp $export_symbols $output_objdir/$soname.def; else echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else ld_shlibs=no fi ;; interix[3-9]*) hardcode_direct=no hardcode_shlibpath_var=no hardcode_libdir_flag_spec='${wl}-rpath,$libdir' export_dynamic_flag_spec='${wl}-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) tmp_diet=no if test "$host_os" = linux-dietlibc; then case $cc_basename in diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) esac fi if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ && test "$tmp_diet" = no then tmp_addflag= tmp_sharedflag='-shared' case $cc_basename,$host_cpu in pgcc*) # Portland Group C compiler whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag' ;; pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag -Mnomain' ;; ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 tmp_addflag=' -i_dynamic' ;; efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 tmp_addflag=' -i_dynamic -nofor_main' ;; ifc* | ifort*) # Intel Fortran compiler tmp_addflag=' -nofor_main' ;; lf95*) # Lahey Fortran 8.1 whole_archive_flag_spec= tmp_sharedflag='--shared' ;; xl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) tmp_sharedflag='-qmkshrobj' tmp_addflag= ;; esac case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' compiler_needs_object=yes tmp_sharedflag='-G' ;; *Sun\ F*) # Sun Fortran 8.3 tmp_sharedflag='-G' ;; esac archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' if test "x$supports_anon_versioning" = xyes; then archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' fi case $cc_basename in xlf*) # IBM XL Fortran 10.1 on PPC cannot create shared libs itself whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' hardcode_libdir_flag_spec= hardcode_libdir_flag_spec_ld='-rpath $libdir' archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib' if test "x$supports_anon_versioning" = xyes; then archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' fi ;; esac else ld_shlibs=no fi ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' fi ;; solaris*) if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then ld_shlibs=no cat <<_LT_EOF 1>&2 *** Warning: The releases 2.8.* of the GNU linker cannot reliably *** create shared libraries on Solaris systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.9.1 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. _LT_EOF elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) case `$LD -v 2>&1` in *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) ld_shlibs=no cat <<_LT_EOF 1>&2 *** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not *** reliably create shared libraries on SCO systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.16.91.0.3 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. _LT_EOF ;; *) # For security reasons, it is highly recommended that you always # use absolute paths for naming shared libraries, and exclude the # DT_RUNPATH tag from executables and libraries. But doing so # requires that you compile everything twice, which is a pain. if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi ;; esac ;; sunos4*) archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' wlarc= hardcode_direct=yes hardcode_shlibpath_var=no ;; *) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi ;; esac if test "$ld_shlibs" = no; then runpath_var= hardcode_libdir_flag_spec= export_dynamic_flag_spec= whole_archive_flag_spec= fi else # PORTME fill in a description of your system's linker (not GNU ld) case $host_os in aix3*) allow_undefined_flag=unsupported always_export_symbols=yes archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' # Note: this linker hardcodes the directories in LIBPATH if there # are no directories specified by -L. hardcode_minus_L=yes if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then # Neither direct hardcoding nor static linking is supported with a # broken collect2. hardcode_direct=unsupported fi ;; aix[4-9]*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag="" else # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' else export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' fi aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # need to do runtime linking. case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) for ld_flag in $LDFLAGS; do if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then aix_use_runtimelinking=yes break fi done ;; esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. archive_cmds='' hardcode_direct=yes hardcode_direct_absolute=yes hardcode_libdir_separator=':' link_all_deplibs=yes file_list_spec='${wl}-f,' if test "$GCC" = yes; then case $host_os in aix4.[012]|aix4.[012].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && strings "$collect2name" | $GREP resolve_lib_name >/dev/null then # We have reworked collect2 : else # We have old collect2 hardcode_direct=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking hardcode_minus_L=yes hardcode_libdir_flag_spec='-L$libdir' hardcode_libdir_separator= fi ;; esac shared_flag='-shared' if test "$aix_use_runtimelinking" = yes; then shared_flag="$shared_flag "'${wl}-G' fi link_all_deplibs=no else # not using gcc if test "$host_cpu" = ia64; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' fi fi fi export_dynamic_flag_spec='${wl}-bexpall' # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to export. always_export_symbols=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. allow_undefined_flag='-berok' # Determine the default libpath from the value encoded in an # empty executable. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : lt_aix_libpath_sed=' /Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/ p } }' aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' allow_undefined_flag="-z nodefs" archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an # empty executable. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : lt_aix_libpath_sed=' /Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/ p } }' aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. no_undefined_flag=' ${wl}-bernotok' allow_undefined_flag=' ${wl}-berok' # Exported symbols can be pulled into shared objects from archives whole_archive_flag_spec='$convenience' archive_cmds_need_lc=yes # This is similar to how AIX traditionally builds its shared libraries. archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='' ;; m68k) archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes ;; esac ;; bsdi[45]*) export_dynamic_flag_spec=-rdynamic ;; cygwin* | mingw* | pw32* | cegcc*) # When not using gcc, we currently assume that we are using # Microsoft Visual C++. # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. hardcode_libdir_flag_spec=' ' allow_undefined_flag=unsupported # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. archive_cmds='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames=' # The linker will automatically build a .lib file if we build a DLL. old_archive_from_new_cmds='true' # FIXME: Should let the user specify the lib program. old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' fix_srcfile_path='`cygpath -w "$srcfile"`' enable_shared_with_static_runtimes=yes ;; darwin* | rhapsody*) archive_cmds_need_lc=no hardcode_direct=no hardcode_automatic=yes hardcode_shlibpath_var=unsupported whole_archive_flag_spec='' link_all_deplibs=yes allow_undefined_flag="$_lt_dar_allow_undefined" case $cc_basename in ifort*) _lt_dar_can_shared=yes ;; *) _lt_dar_can_shared=$GCC ;; esac if test "$_lt_dar_can_shared" = "yes"; then output_verbose_link_cmd=echo archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" else ld_shlibs=no fi ;; dgux*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-L$libdir' hardcode_shlibpath_var=no ;; freebsd1*) ld_shlibs=no ;; # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor # support. Future versions do this automatically, but an explicit c++rt0.o # does not break anything, and helps significantly (at the cost of a little # extra space). freebsd2.2*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; # Unfortunately, older versions of FreeBSD 2 do not have this feature. freebsd2*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes hardcode_minus_L=yes hardcode_shlibpath_var=no ;; # FreeBSD 3 and greater uses gcc -shared to do shared libraries. freebsd* | dragonfly*) archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; hpux9*) if test "$GCC" = yes; then archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' fi hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_separator=: hardcode_direct=yes # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes export_dynamic_flag_spec='${wl}-E' ;; hpux10*) if test "$GCC" = yes -a "$with_gnu_ld" = no; then archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi if test "$with_gnu_ld" = no; then hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_flag_spec_ld='+b $libdir' hardcode_libdir_separator=: hardcode_direct=yes hardcode_direct_absolute=yes export_dynamic_flag_spec='${wl}-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes fi ;; hpux11*) if test "$GCC" = yes -a "$with_gnu_ld" = no; then case $host_cpu in hppa*64*) archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac else case $host_cpu in hppa*64*) archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac fi if test "$with_gnu_ld" = no; then hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_separator=: case $host_cpu in hppa*64*|ia64*) hardcode_direct=no hardcode_shlibpath_var=no ;; *) hardcode_direct=yes hardcode_direct_absolute=yes export_dynamic_flag_spec='${wl}-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes ;; esac fi ;; irix5* | irix6* | nonstopux*) if test "$GCC" = yes; then archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' # Try to use the -exported_symbol ld option, if it does not # work, assume that -exports_file does not work either and # implicitly export all symbols. save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int foo(void) {} _ACEOF if ac_fn_c_try_link "$LINENO"; then : archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LDFLAGS="$save_LDFLAGS" else archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' fi archive_cmds_need_lc='no' hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: inherit_rpath=yes link_all_deplibs=yes ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out else archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF fi hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; newsos6) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: hardcode_shlibpath_var=no ;; *nto* | *qnx*) ;; openbsd*) if test -f /usr/libexec/ld.so; then hardcode_direct=yes hardcode_shlibpath_var=no hardcode_direct_absolute=yes if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' hardcode_libdir_flag_spec='${wl}-rpath,$libdir' export_dynamic_flag_spec='${wl}-E' else case $host_os in openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-R$libdir' ;; *) archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ;; esac fi else ld_shlibs=no fi ;; os2*) hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes allow_undefined_flag=unsupported archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ;; osf3*) if test "$GCC" = yes; then allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else allow_undefined_flag=' -expect_unresolved \*' archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' fi archive_cmds_need_lc='no' hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: ;; osf4* | osf5*) # as osf3* with the addition of -msym flag if test "$GCC" = yes; then allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' else allow_undefined_flag=' -expect_unresolved \*' archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' # Both c and cxx compiler support -rpath directly hardcode_libdir_flag_spec='-rpath $libdir' fi archive_cmds_need_lc='no' hardcode_libdir_separator=: ;; solaris*) no_undefined_flag=' -z defs' if test "$GCC" = yes; then wlarc='${wl}' archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' else case `$CC -V 2>&1` in *"Compilers 5.0"*) wlarc='' archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' ;; *) wlarc='${wl}' archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' ;; esac fi hardcode_libdir_flag_spec='-R$libdir' hardcode_shlibpath_var=no case $host_os in solaris2.[0-5] | solaris2.[0-5].*) ;; *) # The compiler driver will combine and reorder linker options, # but understands `-z linker_flag'. GCC discards it without `$wl', # but is careful enough not to reorder. # Supported since Solaris 2.6 (maybe 2.5.1?) if test "$GCC" = yes; then whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' else whole_archive_flag_spec='-z allextract$convenience -z defaultextract' fi ;; esac link_all_deplibs=yes ;; sunos4*) if test "x$host_vendor" = xsequent; then # Use $CC to link under sequent, because it throws in some extra .o # files that make .init and .fini sections work. archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' fi hardcode_libdir_flag_spec='-L$libdir' hardcode_direct=yes hardcode_minus_L=yes hardcode_shlibpath_var=no ;; sysv4) case $host_vendor in sni) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes # is this really true??? ;; siemens) ## LD is ld it makes a PLAMLIB ## CC just makes a GrossModule. archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' reload_cmds='$CC -r -o $output$reload_objs' hardcode_direct=no ;; motorola) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=no #Motorola manual says yes, but my tests say they lie ;; esac runpath_var='LD_RUN_PATH' hardcode_shlibpath_var=no ;; sysv4.3*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_shlibpath_var=no export_dynamic_flag_spec='-Bexport' ;; sysv4*MP*) if test -d /usr/nec; then archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_shlibpath_var=no runpath_var=LD_RUN_PATH hardcode_runpath_var=yes ld_shlibs=yes fi ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) no_undefined_flag='${wl}-z,text' archive_cmds_need_lc=no hardcode_shlibpath_var=no runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; sysv5* | sco3.2v5* | sco5v6*) # Note: We can NOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. no_undefined_flag='${wl}-z,text' allow_undefined_flag='${wl}-z,nodefs' archive_cmds_need_lc=no hardcode_shlibpath_var=no hardcode_libdir_flag_spec='${wl}-R,$libdir' hardcode_libdir_separator=':' link_all_deplibs=yes export_dynamic_flag_spec='${wl}-Bexport' runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; uts4*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-L$libdir' hardcode_shlibpath_var=no ;; *) ld_shlibs=no ;; esac if test x$host_vendor = xsni; then case $host in sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) export_dynamic_flag_spec='${wl}-Blargedynsym' ;; esac fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5 $as_echo "$ld_shlibs" >&6; } test "$ld_shlibs" = no && can_build_shared=no with_gnu_ld=$with_gnu_ld # # Do we need to explicitly link libc? # case "x$archive_cmds_need_lc" in x|xyes) # Assume -lc should be added archive_cmds_need_lc=yes if test "$enable_shared" = yes && test "$GCC" = yes; then case $archive_cmds in *'~'*) # FIXME: we may have to deal with multi-command sequences. ;; '$CC '*) # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 $as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } $RM conftest* echo "$lt_simple_compile_test_code" > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } 2>conftest.err; then soname=conftest lib=conftest libobjs=conftest.$ac_objext deplibs= wl=$lt_prog_compiler_wl pic_flag=$lt_prog_compiler_pic compiler_flags=-v linker_flags=-v verstring= output_objdir=. libname=conftest lt_save_allow_undefined_flag=$allow_undefined_flag allow_undefined_flag= if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } then archive_cmds_need_lc=no else archive_cmds_need_lc=yes fi allow_undefined_flag=$lt_save_allow_undefined_flag else cat conftest.err 1>&5 fi $RM conftest* { $as_echo "$as_me:${as_lineno-$LINENO}: result: $archive_cmds_need_lc" >&5 $as_echo "$archive_cmds_need_lc" >&6; } ;; esac fi ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 $as_echo_n "checking dynamic linker characteristics... " >&6; } if test "$GCC" = yes; then case $host_os in darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; *) lt_awk_arg="/^libraries:/" ;; esac lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"` if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then # if the path contains ";" then we assume it to be the separator # otherwise default to the standard path separator (i.e. ":") - it is # assumed that no part of a normal pathname contains ";" but that should # okay in the real world where ";" in dirpaths is itself problematic. lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'` else lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi # Ok, now we have the path, separated by spaces, we can step through it # and add multilib dir if necessary. lt_tmp_lt_search_path_spec= lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` for lt_sys_path in $lt_search_path_spec; do if test -d "$lt_sys_path/$lt_multi_os_dir"; then lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" else test -d "$lt_sys_path" && \ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" fi done lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk ' BEGIN {RS=" "; FS="/|\n";} { lt_foo=""; lt_count=0; for (lt_i = NF; lt_i > 0; lt_i--) { if ($lt_i != "" && $lt_i != ".") { if ($lt_i == "..") { lt_count++; } else { if (lt_count == 0) { lt_foo="/" $lt_i lt_foo; } else { lt_count--; } } } } if (lt_foo != "") { lt_freq[lt_foo]++; } if (lt_freq[lt_foo] == 1) { print lt_foo; } }'` sys_lib_search_path_spec=`$ECHO $lt_search_path_spec` else sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" fi library_names_spec= libname_spec='lib$name' soname_spec= shrext_cmds=".so" postinstall_cmds= postuninstall_cmds= finish_cmds= finish_eval= shlibpath_var= shlibpath_overrides_runpath=unknown version_type=none dynamic_linker="$host_os ld.so" sys_lib_dlsearch_path_spec="/lib /usr/lib" need_lib_prefix=unknown hardcode_into_libs=no # when you set need_version to no, make sure it does not cause -set_version # flags to be left without arguments need_version=unknown case $host_os in aix3*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' shlibpath_var=LIBPATH # AIX 3 has no versioning support, so we append a major version to the name. soname_spec='${libname}${release}${shared_ext}$major' ;; aix[4-9]*) version_type=linux need_lib_prefix=no need_version=no hardcode_into_libs=yes if test "$host_cpu" = ia64; then # AIX 5 supports IA64 library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH else # With GCC up to 2.95.x, collect2 would create an import file # for dependence libraries. The import file would start with # the line `#! .'. This would cause the generated library to # depend on `.', always an invalid library. This was fixed in # development snapshots of GCC prior to 3.0. case $host_os in aix4 | aix4.[01] | aix4.[01].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then : else can_build_shared=no fi ;; esac # AIX (on Power*) has no versioning support, so currently we can not hardcode correct # soname into executable. Probably we can add versioning support to # collect2, so additional links can be useful in future. if test "$aix_use_runtimelinking" = yes; then # If using run time linking (on AIX 4.2 or later) use lib.so # instead of lib.a to let people know that these are not # typical AIX shared libraries. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' else # We preserve .a as extension for shared libraries through AIX4.2 # and later when we are not doing run time linking. library_names_spec='${libname}${release}.a $libname.a' soname_spec='${libname}${release}${shared_ext}$major' fi shlibpath_var=LIBPATH fi ;; amigaos*) case $host_cpu in powerpc) # Since July 2007 AmigaOS4 officially supports .so libraries. # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ;; m68k) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; esac ;; beos*) library_names_spec='${libname}${shared_ext}' dynamic_linker="$host_os ld.so" shlibpath_var=LIBRARY_PATH ;; bsdi[45]*) version_type=linux need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" # the default ld.so.conf also contains /usr/contrib/lib and # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow # libtool to hard-code these into programs ;; cygwin* | mingw* | pw32* | cegcc*) version_type=windows shrext_cmds=".dll" need_version=no need_lib_prefix=no case $GCC,$host_os in yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*) library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname~ chmod a+x \$dldir/$dlname~ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; fi' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $RM \$dlpath' shlibpath_overrides_runpath=yes case $host_os in cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" ;; mingw* | cegcc*) # MinGW DLLs use traditional 'lib' prefix soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then # It is most probably a Windows format PATH printed by # mingw gcc, but we are running on Cygwin. Gcc prints its search # path with ; separators, and with drive letters. We can handle the # drive letters (cygwin fileutils understands them), so leave them, # especially as we might pass files found there to a mingw objdump, # which wouldn't understand a cygwinified path. Ahh. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` else sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; esac ;; *) library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' ;; esac dynamic_linker='Win32 ld.exe' # FIXME: first we should search . and the directory the executable is in shlibpath_var=PATH ;; darwin* | rhapsody*) dynamic_linker="$host_os dyld" version_type=darwin need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' soname_spec='${libname}${release}${major}$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ;; dgux*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; freebsd1*) dynamic_linker=no ;; freebsd* | dragonfly*) # DragonFly does not have aout. When/if they implement a new # versioning mechanism, adjust this. if test -x /usr/bin/objformat; then objformat=`/usr/bin/objformat` else case $host_os in freebsd[123]*) objformat=aout ;; *) objformat=elf ;; esac fi version_type=freebsd-$objformat case $version_type in freebsd-elf*) library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' need_version=no need_lib_prefix=no ;; freebsd-*) library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' need_version=yes ;; esac shlibpath_var=LD_LIBRARY_PATH case $host_os in freebsd2*) shlibpath_overrides_runpath=yes ;; freebsd3.[01]* | freebsdelf3.[01]*) shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; *) # from 4.6 on, and DragonFly shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; esac ;; gnu*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH hardcode_into_libs=yes ;; hpux9* | hpux10* | hpux11*) # Give a soname corresponding to the major version so that dld.sl refuses to # link against other versions. version_type=sunos need_lib_prefix=no need_version=no case $host_cpu in ia64*) shrext_cmds='.so' hardcode_into_libs=yes dynamic_linker="$host_os dld.so" shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' if test "X$HPUX_IA64_MODE" = X32; then sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" else sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" fi sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; hppa*64*) shrext_cmds='.sl' hardcode_into_libs=yes dynamic_linker="$host_os dld.sl" shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; *) shrext_cmds='.sl' dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' ;; esac # HP-UX runs *really* slowly unless shared libraries are mode 555. postinstall_cmds='chmod 555 $lib' ;; interix[3-9]*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; irix5* | irix6* | nonstopux*) case $host_os in nonstopux*) version_type=nonstopux ;; *) if test "$lt_cv_prog_gnu_ld" = yes; then version_type=linux else version_type=irix fi ;; esac need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' case $host_os in irix5* | nonstopux*) libsuff= shlibsuff= ;; *) case $LD in # libtool.m4 will add one of these switches to LD *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= libmagic=32-bit;; *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 libmagic=64-bit;; *) libsuff= shlibsuff= libmagic=never-match;; esac ;; esac shlibpath_var=LD_LIBRARY${shlibsuff}_PATH shlibpath_overrides_runpath=no sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" hardcode_into_libs=yes ;; # No shared lib support for Linux oldld, aout, or coff. linux*oldld* | linux*aout* | linux*coff*) dynamic_linker=no ;; # This must be Linux ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no # Some binutils ld are patched to set DT_RUNPATH save_LDFLAGS=$LDFLAGS save_libdir=$libdir eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : shlibpath_overrides_runpath=yes fi fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LDFLAGS=$save_LDFLAGS libdir=$save_libdir # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" fi # We used to test for /lib/ld.so.1 and disable shared libraries on # powerpc, because MkLinux only supported shared libraries with the # GNU dynamic linker. Since this was broken with cross compilers, # most powerpc-linux boxes support dynamic linking these days and # people can always --disable-shared, the test was removed, and we # assume the GNU/Linux dynamic linker is in use. dynamic_linker='GNU/Linux ld.so' ;; netbsdelf*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='NetBSD ld.elf_so' ;; netbsd*) version_type=sunos need_lib_prefix=no need_version=no if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='NetBSD ld.elf_so' fi shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; newsos6) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; *nto* | *qnx*) version_type=qnx need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='ldqnx.so' ;; openbsd*) version_type=sunos sys_lib_dlsearch_path_spec="/usr/lib" need_lib_prefix=no # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. case $host_os in openbsd3.3 | openbsd3.3.*) need_version=yes ;; *) need_version=no ;; esac library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then case $host_os in openbsd2.[89] | openbsd2.[89].*) shlibpath_overrides_runpath=no ;; *) shlibpath_overrides_runpath=yes ;; esac else shlibpath_overrides_runpath=yes fi ;; os2*) libname_spec='$name' shrext_cmds=".dll" need_lib_prefix=no library_names_spec='$libname${shared_ext} $libname.a' dynamic_linker='OS/2 ld.exe' shlibpath_var=LIBPATH ;; osf3* | osf4* | osf5*) version_type=osf need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ;; rdos*) dynamic_linker=no ;; solaris*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes # ldd complains unless libraries are executable postinstall_cmds='chmod +x $lib' ;; sunos4*) version_type=sunos library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes if test "$with_gnu_ld" = yes; then need_lib_prefix=no fi need_version=yes ;; sysv4 | sysv4.3*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH case $host_vendor in sni) shlibpath_overrides_runpath=no need_lib_prefix=no runpath_var=LD_RUN_PATH ;; siemens) need_lib_prefix=no ;; motorola) need_lib_prefix=no need_version=no shlibpath_overrides_runpath=no sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ;; esac ;; sysv4*MP*) if test -d /usr/nec ;then version_type=linux library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' soname_spec='$libname${shared_ext}.$major' shlibpath_var=LD_LIBRARY_PATH fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) version_type=freebsd-elf need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes if test "$with_gnu_ld" = yes; then sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' else sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' case $host_os in sco3.2v5*) sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ;; esac fi sys_lib_dlsearch_path_spec='/usr/lib' ;; tpf*) # TPF is a cross-target only. Preferred cross-host = GNU/Linux. version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; uts4*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; *) dynamic_linker=no ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 $as_echo "$dynamic_linker" >&6; } test "$dynamic_linker" = no && can_build_shared=no variables_saved_for_relink="PATH $shlibpath_var $runpath_var" if test "$GCC" = yes; then variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" fi if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 $as_echo_n "checking how to hardcode library paths into programs... " >&6; } hardcode_action= if test -n "$hardcode_libdir_flag_spec" || test -n "$runpath_var" || test "X$hardcode_automatic" = "Xyes" ; then # We can hardcode non-existent directories. if test "$hardcode_direct" != no && # If the only mechanism to avoid hardcoding is shlibpath_var, we # have to relink, otherwise we might link with an installed library # when we should be linking with a yet-to-be-installed one ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no && test "$hardcode_minus_L" != no; then # Linking always hardcodes the temporary library directory. hardcode_action=relink else # We can link without hardcoding, and we can hardcode nonexisting dirs. hardcode_action=immediate fi else # We cannot hardcode anything, or else we can only hardcode existing # directories. hardcode_action=unsupported fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5 $as_echo "$hardcode_action" >&6; } if test "$hardcode_action" = relink || test "$inherit_rpath" = yes; then # Fast installation is not supported enable_fast_install=no elif test "$shlibpath_overrides_runpath" = yes || test "$enable_shared" = no; then # Fast installation is not necessary enable_fast_install=needless fi if test "x$enable_dlopen" != xyes; then enable_dlopen=unknown enable_dlopen_self=unknown enable_dlopen_self_static=unknown else lt_cv_dlopen=no lt_cv_dlopen_libs= case $host_os in beos*) lt_cv_dlopen="load_add_on" lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ;; mingw* | pw32* | cegcc*) lt_cv_dlopen="LoadLibrary" lt_cv_dlopen_libs= ;; cygwin*) lt_cv_dlopen="dlopen" lt_cv_dlopen_libs= ;; darwin*) # if libdl is installed we need to link against it { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 $as_echo_n "checking for dlopen in -ldl... " >&6; } if test "${ac_cv_lib_dl_dlopen+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldl $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dlopen (); int main () { return dlopen (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_dl_dlopen=yes else ac_cv_lib_dl_dlopen=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 $as_echo "$ac_cv_lib_dl_dlopen" >&6; } if test "x$ac_cv_lib_dl_dlopen" = x""yes; then : lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" else lt_cv_dlopen="dyld" lt_cv_dlopen_libs= lt_cv_dlopen_self=yes fi ;; *) ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load" if test "x$ac_cv_func_shl_load" = x""yes; then : lt_cv_dlopen="shl_load" else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5 $as_echo_n "checking for shl_load in -ldld... " >&6; } if test "${ac_cv_lib_dld_shl_load+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldld $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char shl_load (); int main () { return shl_load (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_dld_shl_load=yes else ac_cv_lib_dld_shl_load=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5 $as_echo "$ac_cv_lib_dld_shl_load" >&6; } if test "x$ac_cv_lib_dld_shl_load" = x""yes; then : lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" else ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen" if test "x$ac_cv_func_dlopen" = x""yes; then : lt_cv_dlopen="dlopen" else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 $as_echo_n "checking for dlopen in -ldl... " >&6; } if test "${ac_cv_lib_dl_dlopen+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldl $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dlopen (); int main () { return dlopen (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_dl_dlopen=yes else ac_cv_lib_dl_dlopen=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 $as_echo "$ac_cv_lib_dl_dlopen" >&6; } if test "x$ac_cv_lib_dl_dlopen" = x""yes; then : lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5 $as_echo_n "checking for dlopen in -lsvld... " >&6; } if test "${ac_cv_lib_svld_dlopen+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lsvld $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dlopen (); int main () { return dlopen (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_svld_dlopen=yes else ac_cv_lib_svld_dlopen=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5 $as_echo "$ac_cv_lib_svld_dlopen" >&6; } if test "x$ac_cv_lib_svld_dlopen" = x""yes; then : lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5 $as_echo_n "checking for dld_link in -ldld... " >&6; } if test "${ac_cv_lib_dld_dld_link+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldld $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dld_link (); int main () { return dld_link (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_dld_dld_link=yes else ac_cv_lib_dld_dld_link=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5 $as_echo "$ac_cv_lib_dld_dld_link" >&6; } if test "x$ac_cv_lib_dld_dld_link" = x""yes; then : lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" fi fi fi fi fi fi ;; esac if test "x$lt_cv_dlopen" != xno; then enable_dlopen=yes else enable_dlopen=no fi case $lt_cv_dlopen in dlopen) save_CPPFLAGS="$CPPFLAGS" test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" save_LDFLAGS="$LDFLAGS" wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" save_LIBS="$LIBS" LIBS="$lt_cv_dlopen_libs $LIBS" { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5 $as_echo_n "checking whether a program can dlopen itself... " >&6; } if test "${lt_cv_dlopen_self+set}" = set; then : $as_echo_n "(cached) " >&6 else if test "$cross_compiling" = yes; then : lt_cv_dlopen_self=cross else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF #line 10757 "configure" #include "confdefs.h" #if HAVE_DLFCN_H #include #endif #include #ifdef RTLD_GLOBAL # define LT_DLGLOBAL RTLD_GLOBAL #else # ifdef DL_GLOBAL # define LT_DLGLOBAL DL_GLOBAL # else # define LT_DLGLOBAL 0 # endif #endif /* We may have to define LT_DLLAZY_OR_NOW in the command line if we find out it does not work in some platform. */ #ifndef LT_DLLAZY_OR_NOW # ifdef RTLD_LAZY # define LT_DLLAZY_OR_NOW RTLD_LAZY # else # ifdef DL_LAZY # define LT_DLLAZY_OR_NOW DL_LAZY # else # ifdef RTLD_NOW # define LT_DLLAZY_OR_NOW RTLD_NOW # else # ifdef DL_NOW # define LT_DLLAZY_OR_NOW DL_NOW # else # define LT_DLLAZY_OR_NOW 0 # endif # endif # endif # endif #endif void fnord() { int i=42;} int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); int status = $lt_dlunknown; if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; /* dlclose (self); */ } else puts (dlerror ()); return status; } _LT_EOF if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 (eval $ac_link) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; esac else : # compilation failed lt_cv_dlopen_self=no fi fi rm -fr conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5 $as_echo "$lt_cv_dlopen_self" >&6; } if test "x$lt_cv_dlopen_self" = xyes; then wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5 $as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } if test "${lt_cv_dlopen_self_static+set}" = set; then : $as_echo_n "(cached) " >&6 else if test "$cross_compiling" = yes; then : lt_cv_dlopen_self_static=cross else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF #line 10853 "configure" #include "confdefs.h" #if HAVE_DLFCN_H #include #endif #include #ifdef RTLD_GLOBAL # define LT_DLGLOBAL RTLD_GLOBAL #else # ifdef DL_GLOBAL # define LT_DLGLOBAL DL_GLOBAL # else # define LT_DLGLOBAL 0 # endif #endif /* We may have to define LT_DLLAZY_OR_NOW in the command line if we find out it does not work in some platform. */ #ifndef LT_DLLAZY_OR_NOW # ifdef RTLD_LAZY # define LT_DLLAZY_OR_NOW RTLD_LAZY # else # ifdef DL_LAZY # define LT_DLLAZY_OR_NOW DL_LAZY # else # ifdef RTLD_NOW # define LT_DLLAZY_OR_NOW RTLD_NOW # else # ifdef DL_NOW # define LT_DLLAZY_OR_NOW DL_NOW # else # define LT_DLLAZY_OR_NOW 0 # endif # endif # endif # endif #endif void fnord() { int i=42;} int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); int status = $lt_dlunknown; if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; /* dlclose (self); */ } else puts (dlerror ()); return status; } _LT_EOF if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 (eval $ac_link) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; esac else : # compilation failed lt_cv_dlopen_self_static=no fi fi rm -fr conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5 $as_echo "$lt_cv_dlopen_self_static" >&6; } fi CPPFLAGS="$save_CPPFLAGS" LDFLAGS="$save_LDFLAGS" LIBS="$save_LIBS" ;; esac case $lt_cv_dlopen_self in yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; *) enable_dlopen_self=unknown ;; esac case $lt_cv_dlopen_self_static in yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; *) enable_dlopen_self_static=unknown ;; esac fi striplib= old_striplib= { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5 $as_echo_n "checking whether stripping libraries is possible... " >&6; } if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" test -z "$striplib" && striplib="$STRIP --strip-unneeded" { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else # FIXME - insert some real tests, host_os isn't really good enough case $host_os in darwin*) if test -n "$STRIP" ; then striplib="$STRIP -x" old_striplib="$STRIP -S" { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi ;; *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } ;; esac fi # Report which library types will actually be built { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5 $as_echo_n "checking if libtool supports shared libraries... " >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5 $as_echo "$can_build_shared" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5 $as_echo_n "checking whether to build shared libraries... " >&6; } test "$can_build_shared" = "no" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix[4-9]*) if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then test "$enable_shared" = yes && enable_static=no fi ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5 $as_echo "$enable_shared" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5 $as_echo_n "checking whether to build static libraries... " >&6; } # Make sure either enable_shared or enable_static is yes. test "$enable_shared" = yes || enable_static=yes { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5 $as_echo "$enable_static" >&6; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu CC="$lt_save_CC" ac_config_commands="$ac_config_commands libtool" # Only expand once: { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing strerror" >&5 $as_echo_n "checking for library containing strerror... " >&6; } if test "${ac_cv_search_strerror+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_func_search_save_LIBS=$LIBS cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char strerror (); int main () { return strerror (); ; return 0; } _ACEOF for ac_lib in '' cposix; do if test -z "$ac_lib"; then ac_res="none required" else ac_res=-l$ac_lib LIBS="-l$ac_lib $ac_func_search_save_LIBS" fi if ac_fn_c_try_link "$LINENO"; then : ac_cv_search_strerror=$ac_res fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext if test "${ac_cv_search_strerror+set}" = set; then : break fi done if test "${ac_cv_search_strerror+set}" = set; then : else ac_cv_search_strerror=no fi rm conftest.$ac_ext LIBS=$ac_func_search_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_strerror" >&5 $as_echo "$ac_cv_search_strerror" >&6; } ac_res=$ac_cv_search_strerror if test "$ac_res" != no; then : test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="${ac_tool_prefix}gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CC="gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi else CC="$ac_cv_prog_CC" fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="${ac_tool_prefix}cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else ac_prog_rejected=no as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift if test $# != 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" fi fi fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then for ac_prog in cl.exe do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$CC" && break done fi if test -z "$CC"; then ac_ct_CC=$CC for ac_prog in cl.exe do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CC="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_CC" && break done if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi fi fi test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error "no acceptable C compiler found in \$PATH See \`config.log' for more details." "$LINENO" 5; } # Provide some information about the compiler. $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 set X $ac_compile ac_compiler=$2 for ac_option in --version -v -V -qversion; do { { ac_try="$ac_compiler $ac_option >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compiler $ac_option >&5") 2>conftest.err ac_status=$? if test -s conftest.err; then sed '10a\ ... rest of stderr output deleted ... 10q' conftest.err >conftest.er1 cat conftest.er1 >&5 fi rm -f conftest.er1 conftest.err $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } done { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 $as_echo_n "checking whether we are using the GNU C compiler... " >&6; } if test "${ac_cv_c_compiler_gnu+set}" = set; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { #ifndef __GNUC__ choke me #endif ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_compiler_gnu=yes else ac_compiler_gnu=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 $as_echo "$ac_cv_c_compiler_gnu" >&6; } if test $ac_compiler_gnu = yes; then GCC=yes else GCC= fi ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 $as_echo_n "checking whether $CC accepts -g... " >&6; } if test "${ac_cv_prog_cc_g+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_save_c_werror_flag=$ac_c_werror_flag ac_c_werror_flag=yes ac_cv_prog_cc_g=no CFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes else CFLAGS="" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : else ac_c_werror_flag=$ac_save_c_werror_flag CFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_c_werror_flag=$ac_save_c_werror_flag fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 $as_echo "$ac_cv_prog_cc_g" >&6; } if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then if test "$GCC" = yes; then CFLAGS="-g -O2" else CFLAGS="-g" fi else if test "$GCC" = yes; then CFLAGS="-O2" else CFLAGS= fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 $as_echo_n "checking for $CC option to accept ISO C89... " >&6; } if test "${ac_cv_prog_cc_c89+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_cv_prog_cc_c89=no ac_save_CC=$CC cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #include #include /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ struct buf { int x; }; FILE * (*rcsopen) (struct buf *, struct stat *, int); static char *e (p, i) char **p; int i; { return p[i]; } static char *f (char * (*g) (char **, int), char **p, ...) { char *s; va_list v; va_start (v,p); s = g (p, va_arg (v,int)); va_end (v); return s; } /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has function prototypes and stuff, but not '\xHH' hex character constants. These don't provoke an error unfortunately, instead are silently treated as 'x'. The following induces an error, until -std is added to get proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an array size at least. It's necessary to write '\x00'==0 to get something that's true only with -std. */ int osf4_cc_array ['\x00' == 0 ? 1 : -1]; /* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters inside strings and character constants. */ #define FOO(x) 'x' int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; int test (int i, double x); struct s1 {int (*f) (int a);}; struct s2 {int (*f) (double a);}; int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); int argc; char **argv; int main () { return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; ; return 0; } _ACEOF for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_c89=$ac_arg fi rm -f core conftest.err conftest.$ac_objext test "x$ac_cv_prog_cc_c89" != "xno" && break done rm -f conftest.$ac_ext CC=$ac_save_CC fi # AC_CACHE_VAL case "x$ac_cv_prog_cc_c89" in x) { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 $as_echo "none needed" >&6; } ;; xno) { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 $as_echo "unsupported" >&6; } ;; *) CC="$CC $ac_cv_prog_cc_c89" { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 $as_echo "$ac_cv_prog_cc_c89" >&6; } ;; esac if test "x$ac_cv_prog_cc_c89" != xno; then : fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu depcc="$CC" am_compiler_list= { $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 $as_echo_n "checking dependency style of $depcc... " >&6; } if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named `D' -- because `-MD' means `put the output # in D'. mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_CC_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` fi am__universal=false case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with # Solaris 8's {/usr,}/bin/sh. touch sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf # We check with `-c' and `-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle `-M -o', and we need to detect this. Also, some Intel # versions had trouble with output in subdirs am__obj=sub/conftest.${OBJEXT-o} am__minus_obj="-o $am__obj" case $depmode in gcc) # This depmode causes a compiler race in universal mode. test "$am__universal" = false || continue ;; nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; msvisualcpp | msvcmsys) # This compiler won't grok `-c -o', but also, the minuso test has # not run yet. These depmodes are late enough in the game, and # so weak that their functioning should not be impacted. am__obj=conftest.${OBJEXT-o} am__minus_obj= ;; none) break ;; esac if depmode=$depmode \ source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_CC_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_CC_dependencies_compiler_type=none fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 $as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type if test "x$enable_dependency_tracking" != xno \ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then am__fastdepCC_TRUE= am__fastdepCC_FALSE='#' else am__fastdepCC_TRUE='#' am__fastdepCC_FALSE= fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 $as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } set x ${MAKE-make} ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then : $as_echo_n "(cached) " >&6 else cat >conftest.make <<\_ACEOF SHELL = /bin/sh all: @echo '@@@%%%=$(MAKE)=@@@%%%' _ACEOF # GNU make sometimes prints "make[1]: Entering...", which would confuse us. case `${MAKE-make} -f conftest.make 2>/dev/null` in *@@@%%%=?*=@@@%%%*) eval ac_cv_prog_make_${ac_make}_set=yes;; *) eval ac_cv_prog_make_${ac_make}_set=no;; esac rm -f conftest.make fi if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } SET_MAKE= else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } SET_MAKE="MAKE=${MAKE-make}" fi for ac_header in locale.h do : ac_fn_c_check_header_mongrel "$LINENO" "locale.h" "ac_cv_header_locale_h" "$ac_includes_default" if test "x$ac_cv_header_locale_h" = x""yes; then : cat >>confdefs.h <<_ACEOF #define HAVE_LOCALE_H 1 _ACEOF fi done if test $ac_cv_header_locale_h = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for LC_MESSAGES" >&5 $as_echo_n "checking for LC_MESSAGES... " >&6; } if test "${am_cv_val_LC_MESSAGES+set}" = set; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int main () { return LC_MESSAGES ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : am_cv_val_LC_MESSAGES=yes else am_cv_val_LC_MESSAGES=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_val_LC_MESSAGES" >&5 $as_echo "$am_cv_val_LC_MESSAGES" >&6; } if test $am_cv_val_LC_MESSAGES = yes; then $as_echo "#define HAVE_LC_MESSAGES 1" >>confdefs.h fi fi USE_NLS=yes gt_cv_have_gettext=no CATOBJEXT=NONE XGETTEXT=: INTLLIBS= ac_fn_c_check_header_mongrel "$LINENO" "libintl.h" "ac_cv_header_libintl_h" "$ac_includes_default" if test "x$ac_cv_header_libintl_h" = x""yes; then : gt_cv_func_dgettext_libintl="no" libintl_extra_libs="" # # First check in libc # { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ngettext in libc" >&5 $as_echo_n "checking for ngettext in libc... " >&6; } if test "${gt_cv_func_ngettext_libc+set}" = set; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int main () { return !ngettext ("","", 1) ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : gt_cv_func_ngettext_libc=yes else gt_cv_func_ngettext_libc=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_ngettext_libc" >&5 $as_echo "$gt_cv_func_ngettext_libc" >&6; } if test "$gt_cv_func_ngettext_libc" = "yes" ; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dgettext in libc" >&5 $as_echo_n "checking for dgettext in libc... " >&6; } if test "${gt_cv_func_dgettext_libc+set}" = set; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int main () { return !dgettext ("","") ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : gt_cv_func_dgettext_libc=yes else gt_cv_func_dgettext_libc=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_dgettext_libc" >&5 $as_echo "$gt_cv_func_dgettext_libc" >&6; } fi if test "$gt_cv_func_ngettext_libc" = "yes" ; then for ac_func in bind_textdomain_codeset do : ac_fn_c_check_func "$LINENO" "bind_textdomain_codeset" "ac_cv_func_bind_textdomain_codeset" if test "x$ac_cv_func_bind_textdomain_codeset" = x""yes; then : cat >>confdefs.h <<_ACEOF #define HAVE_BIND_TEXTDOMAIN_CODESET 1 _ACEOF fi done fi # # If we don't have everything we want, check in libintl # if test "$gt_cv_func_dgettext_libc" != "yes" \ || test "$gt_cv_func_ngettext_libc" != "yes" \ || test "$ac_cv_func_bind_textdomain_codeset" != "yes" ; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for bindtextdomain in -lintl" >&5 $as_echo_n "checking for bindtextdomain in -lintl... " >&6; } if test "${ac_cv_lib_intl_bindtextdomain+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lintl $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char bindtextdomain (); int main () { return bindtextdomain (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_intl_bindtextdomain=yes else ac_cv_lib_intl_bindtextdomain=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_intl_bindtextdomain" >&5 $as_echo "$ac_cv_lib_intl_bindtextdomain" >&6; } if test "x$ac_cv_lib_intl_bindtextdomain" = x""yes; then : { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ngettext in -lintl" >&5 $as_echo_n "checking for ngettext in -lintl... " >&6; } if test "${ac_cv_lib_intl_ngettext+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lintl $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char ngettext (); int main () { return ngettext (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_intl_ngettext=yes else ac_cv_lib_intl_ngettext=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_intl_ngettext" >&5 $as_echo "$ac_cv_lib_intl_ngettext" >&6; } if test "x$ac_cv_lib_intl_ngettext" = x""yes; then : { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dgettext in -lintl" >&5 $as_echo_n "checking for dgettext in -lintl... " >&6; } if test "${ac_cv_lib_intl_dgettext+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lintl $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dgettext (); int main () { return dgettext (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_intl_dgettext=yes else ac_cv_lib_intl_dgettext=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_intl_dgettext" >&5 $as_echo "$ac_cv_lib_intl_dgettext" >&6; } if test "x$ac_cv_lib_intl_dgettext" = x""yes; then : gt_cv_func_dgettext_libintl=yes fi fi fi if test "$gt_cv_func_dgettext_libintl" != "yes" ; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking if -liconv is needed to use gettext" >&5 $as_echo_n "checking if -liconv is needed to use gettext... " >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: " >&5 $as_echo "" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ngettext in -lintl" >&5 $as_echo_n "checking for ngettext in -lintl... " >&6; } if test "${ac_cv_lib_intl_ngettext+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lintl -liconv $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char ngettext (); int main () { return ngettext (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_intl_ngettext=yes else ac_cv_lib_intl_ngettext=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_intl_ngettext" >&5 $as_echo "$ac_cv_lib_intl_ngettext" >&6; } if test "x$ac_cv_lib_intl_ngettext" = x""yes; then : { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dcgettext in -lintl" >&5 $as_echo_n "checking for dcgettext in -lintl... " >&6; } if test "${ac_cv_lib_intl_dcgettext+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lintl -liconv $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dcgettext (); int main () { return dcgettext (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_intl_dcgettext=yes else ac_cv_lib_intl_dcgettext=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_intl_dcgettext" >&5 $as_echo "$ac_cv_lib_intl_dcgettext" >&6; } if test "x$ac_cv_lib_intl_dcgettext" = x""yes; then : gt_cv_func_dgettext_libintl=yes libintl_extra_libs=-liconv else : fi else : fi fi # # If we found libintl, then check in it for bind_textdomain_codeset(); # we'll prefer libc if neither have bind_textdomain_codeset(), # and both have dgettext and ngettext # if test "$gt_cv_func_dgettext_libintl" = "yes" ; then glib_save_LIBS="$LIBS" LIBS="$LIBS -lintl $libintl_extra_libs" unset ac_cv_func_bind_textdomain_codeset for ac_func in bind_textdomain_codeset do : ac_fn_c_check_func "$LINENO" "bind_textdomain_codeset" "ac_cv_func_bind_textdomain_codeset" if test "x$ac_cv_func_bind_textdomain_codeset" = x""yes; then : cat >>confdefs.h <<_ACEOF #define HAVE_BIND_TEXTDOMAIN_CODESET 1 _ACEOF fi done LIBS="$glib_save_LIBS" if test "$ac_cv_func_bind_textdomain_codeset" = "yes" ; then gt_cv_func_dgettext_libc=no else if test "$gt_cv_func_dgettext_libc" = "yes" \ && test "$gt_cv_func_ngettext_libc" = "yes"; then gt_cv_func_dgettext_libintl=no fi fi fi fi if test "$gt_cv_func_dgettext_libc" = "yes" \ || test "$gt_cv_func_dgettext_libintl" = "yes"; then gt_cv_have_gettext=yes fi if test "$gt_cv_func_dgettext_libintl" = "yes"; then INTLLIBS="-lintl $libintl_extra_libs" fi if test "$gt_cv_have_gettext" = "yes"; then $as_echo "#define HAVE_GETTEXT 1" >>confdefs.h # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_MSGFMT+set}" = set; then : $as_echo_n "(cached) " >&6 else case "$MSGFMT" in /*) ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then ac_cv_path_MSGFMT="$ac_dir/$ac_word" break fi fi done IFS="$ac_save_ifs" test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT="no" ;; esac fi MSGFMT="$ac_cv_path_MSGFMT" if test "$MSGFMT" != "no"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGFMT" >&5 $as_echo "$MSGFMT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "$MSGFMT" != "no"; then glib_save_LIBS="$LIBS" LIBS="$LIBS $INTLLIBS" for ac_func in dcgettext do : ac_fn_c_check_func "$LINENO" "dcgettext" "ac_cv_func_dcgettext" if test "x$ac_cv_func_dcgettext" = x""yes; then : cat >>confdefs.h <<_ACEOF #define HAVE_DCGETTEXT 1 _ACEOF fi done MSGFMT_OPTS= { $as_echo "$as_me:${as_lineno-$LINENO}: checking if msgfmt accepts -c" >&5 $as_echo_n "checking if msgfmt accepts -c... " >&6; } cat >conftest.foo <<_ACEOF msgid "" msgstr "" "Content-Type: text/plain; charset=UTF-8\n" "Project-Id-Version: test 1.0\n" "PO-Revision-Date: 2007-02-15 12:01+0100\n" "Last-Translator: test \n" "Language-Team: C \n" "MIME-Version: 1.0\n" "Content-Transfer-Encoding: 8bit\n" _ACEOF if { { $as_echo "$as_me:${as_lineno-$LINENO}: \$MSGFMT -c -o /dev/null conftest.foo"; } >&5 ($MSGFMT -c -o /dev/null conftest.foo) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then MSGFMT_OPTS=-c; { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } echo "$as_me: failed input was:" >&5 sed 's/^/| /' conftest.foo >&5 fi # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_GMSGFMT+set}" = set; then : $as_echo_n "(cached) " >&6 else case $GMSGFMT in [\\/]* | ?:[\\/]*) ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT" ;; esac fi GMSGFMT=$ac_cv_path_GMSGFMT if test -n "$GMSGFMT"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GMSGFMT" >&5 $as_echo "$GMSGFMT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_XGETTEXT+set}" = set; then : $as_echo_n "(cached) " >&6 else case "$XGETTEXT" in /*) ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then ac_cv_path_XGETTEXT="$ac_dir/$ac_word" break fi fi done IFS="$ac_save_ifs" test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":" ;; esac fi XGETTEXT="$ac_cv_path_XGETTEXT" if test "$XGETTEXT" != ":"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XGETTEXT" >&5 $as_echo "$XGETTEXT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { extern int _nl_msg_cat_cntr; return _nl_msg_cat_cntr ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : CATOBJEXT=.gmo DATADIRNAME=share else case $host in *-*-solaris*) ac_fn_c_check_func "$LINENO" "bind_textdomain_codeset" "ac_cv_func_bind_textdomain_codeset" if test "x$ac_cv_func_bind_textdomain_codeset" = x""yes; then : CATOBJEXT=.gmo DATADIRNAME=share else CATOBJEXT=.mo DATADIRNAME=lib fi ;; *) CATOBJEXT=.mo DATADIRNAME=lib ;; esac fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS="$glib_save_LIBS" INSTOBJEXT=.mo else gt_cv_have_gettext=no fi fi fi if test "$gt_cv_have_gettext" = "yes" ; then $as_echo "#define ENABLE_NLS 1" >>confdefs.h fi if test "$XGETTEXT" != ":"; then if $XGETTEXT --omit-header /dev/null 2> /dev/null; then : ; else { $as_echo "$as_me:${as_lineno-$LINENO}: result: found xgettext program is not GNU xgettext; ignore it" >&5 $as_echo "found xgettext program is not GNU xgettext; ignore it" >&6; } XGETTEXT=":" fi fi # We need to process the po/ directory. POSUB=po ac_config_commands="$ac_config_commands default-1" for lang in $ALL_LINGUAS; do GMOFILES="$GMOFILES $lang.gmo" POFILES="$POFILES $lang.po" done if test "$gt_cv_have_gettext" = "yes"; then if test "x$ALL_LINGUAS" = "x"; then LINGUAS= else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for catalogs to be installed" >&5 $as_echo_n "checking for catalogs to be installed... " >&6; } NEW_LINGUAS= for presentlang in $ALL_LINGUAS; do useit=no if test "%UNSET%" != "${LINGUAS-%UNSET%}"; then desiredlanguages="$LINGUAS" else desiredlanguages="$ALL_LINGUAS" fi for desiredlang in $desiredlanguages; do # Use the presentlang catalog if desiredlang is # a. equal to presentlang, or # b. a variant of presentlang (because in this case, # presentlang can be used as a fallback for messages # which are not translated in the desiredlang catalog). case "$desiredlang" in "$presentlang"*) useit=yes;; esac done if test $useit = yes; then NEW_LINGUAS="$NEW_LINGUAS $presentlang" fi done LINGUAS=$NEW_LINGUAS { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LINGUAS" >&5 $as_echo "$LINGUAS" >&6; } fi if test -n "$LINGUAS"; then for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done fi fi MKINSTALLDIRS= if test -n "$ac_aux_dir"; then MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs" fi if test -z "$MKINSTALLDIRS"; then MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs" fi test -d po || mkdir po if test "x$srcdir" != "x."; then if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then posrcprefix="$srcdir/" else posrcprefix="../$srcdir/" fi else posrcprefix="../" fi rm -f po/POTFILES sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \ < $srcdir/po/POTFILES.in > po/POTFILES GETTEXT_PACKAGE=netspeed_applet cat >>confdefs.h <<_ACEOF #define GETTEXT_PACKAGE "$GETTEXT_PACKAGE" _ACEOF if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args. set dummy ${ac_tool_prefix}pkg-config; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_PKG_CONFIG+set}" = set; then : $as_echo_n "(cached) " >&6 else case $PKG_CONFIG in [\\/]* | ?:[\\/]*) ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi PKG_CONFIG=$ac_cv_path_PKG_CONFIG if test -n "$PKG_CONFIG"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5 $as_echo "$PKG_CONFIG" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_path_PKG_CONFIG"; then ac_pt_PKG_CONFIG=$PKG_CONFIG # Extract the first word of "pkg-config", so it can be a program name with args. set dummy pkg-config; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_ac_pt_PKG_CONFIG+set}" = set; then : $as_echo_n "(cached) " >&6 else case $ac_pt_PKG_CONFIG in [\\/]* | ?:[\\/]*) ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG if test -n "$ac_pt_PKG_CONFIG"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5 $as_echo "$ac_pt_PKG_CONFIG" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_pt_PKG_CONFIG" = x; then PKG_CONFIG="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac PKG_CONFIG=$ac_pt_PKG_CONFIG fi else PKG_CONFIG="$ac_cv_path_PKG_CONFIG" fi fi if test -n "$PKG_CONFIG"; then _pkg_min_version=0.9.0 { $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5 $as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; } if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } PKG_CONFIG="" fi fi pkg_failed=no { $as_echo "$as_me:${as_lineno-$LINENO}: checking for NETSPEED" >&5 $as_echo_n "checking for NETSPEED... " >&6; } if test -n "$PKG_CONFIG"; then if test -n "$NETSPEED_CFLAGS"; then pkg_cv_NETSPEED_CFLAGS="$NETSPEED_CFLAGS" else if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libpanelapplet-2.0 libgtop-2.0 >= 2.14.2\""; } >&5 ($PKG_CONFIG --exists --print-errors "libpanelapplet-2.0 libgtop-2.0 >= 2.14.2") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_NETSPEED_CFLAGS=`$PKG_CONFIG --cflags "libpanelapplet-2.0 libgtop-2.0 >= 2.14.2" 2>/dev/null` else pkg_failed=yes fi fi else pkg_failed=untried fi if test -n "$PKG_CONFIG"; then if test -n "$NETSPEED_LIBS"; then pkg_cv_NETSPEED_LIBS="$NETSPEED_LIBS" else if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libpanelapplet-2.0 libgtop-2.0 >= 2.14.2\""; } >&5 ($PKG_CONFIG --exists --print-errors "libpanelapplet-2.0 libgtop-2.0 >= 2.14.2") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then pkg_cv_NETSPEED_LIBS=`$PKG_CONFIG --libs "libpanelapplet-2.0 libgtop-2.0 >= 2.14.2" 2>/dev/null` else pkg_failed=yes fi fi else pkg_failed=untried fi if test $pkg_failed = yes; then if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then _pkg_short_errors_supported=yes else _pkg_short_errors_supported=no fi if test $_pkg_short_errors_supported = yes; then NETSPEED_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "libpanelapplet-2.0 libgtop-2.0 >= 2.14.2"` else NETSPEED_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "libpanelapplet-2.0 libgtop-2.0 >= 2.14.2"` fi # Put the nasty error message in config.log where it belongs echo "$NETSPEED_PKG_ERRORS" >&5 as_fn_error "Package requirements (libpanelapplet-2.0 libgtop-2.0 >= 2.14.2) were not met: $NETSPEED_PKG_ERRORS Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables NETSPEED_CFLAGS and NETSPEED_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. " "$LINENO" 5 elif test $pkg_failed = untried; then { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error "The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. Alternatively, you may set the environment variables NETSPEED_CFLAGS and NETSPEED_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. To get pkg-config, see . See \`config.log' for more details." "$LINENO" 5; } else NETSPEED_CFLAGS=$pkg_cv_NETSPEED_CFLAGS NETSPEED_LIBS=$pkg_cv_NETSPEED_LIBS { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } : fi gdu_cv_version_required=0.3.2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking gnome-doc-utils >= $gdu_cv_version_required" >&5 $as_echo_n "checking gnome-doc-utils >= $gdu_cv_version_required... " >&6; } if test -n "$PKG_CONFIG" && \ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gnome-doc-utils >= \$gdu_cv_version_required\""; } >&5 ($PKG_CONFIG --exists --print-errors "gnome-doc-utils >= $gdu_cv_version_required") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then gdu_cv_have_gdu=yes else gdu_cv_have_gdu=no fi if test "$gdu_cv_have_gdu" = "yes"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } : else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } as_fn_error "gnome-doc-utils >= $gdu_cv_version_required not found" "$LINENO" 5 fi # Check whether --with-help-dir was given. if test "${with_help_dir+set}" = set; then : withval=$with_help_dir; else with_help_dir='${datadir}/gnome/help' fi HELP_DIR="$with_help_dir" # Check whether --with-omf-dir was given. if test "${with_omf_dir+set}" = set; then : withval=$with_omf_dir; else with_omf_dir='${datadir}/omf' fi OMF_DIR="$with_omf_dir" # Check whether --with-help-formats was given. if test "${with_help_formats+set}" = set; then : withval=$with_help_formats; else with_help_formats='' fi DOC_USER_FORMATS="$with_help_formats" # Check whether --enable-scrollkeeper was given. if test "${enable_scrollkeeper+set}" = set; then : enableval=$enable_scrollkeeper; else enable_scrollkeeper=yes fi if test "$gdu_cv_have_gdu" = "yes" -a "$enable_scrollkeeper" = "yes"; then ENABLE_SK_TRUE= ENABLE_SK_FALSE='#' else ENABLE_SK_TRUE='#' ENABLE_SK_FALSE= fi DISTCHECK_CONFIGURE_FLAGS="--disable-scrollkeeper $DISTCHECK_CONFIGURE_FLAGS" if test "$gdu_cv_have_gdu" = "yes"; then HAVE_GNOME_DOC_UTILS_TRUE= HAVE_GNOME_DOC_UTILS_FALSE='#' else HAVE_GNOME_DOC_UTILS_TRUE='#' HAVE_GNOME_DOC_UTILS_FALSE= fi ac_have_iwevgenie=no { $as_echo "$as_me:${as_lineno-$LINENO}: checking for wireless-tools >= 28pre9" >&5 $as_echo_n "checking for wireless-tools >= 28pre9... " >&6; } cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #ifndef IWEVGENIE #error "not found" #endif _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_have_iwevgenie=yes fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_have_iwevgenie" >&5 $as_echo "$ac_have_iwevgenie" >&6; } if test "$ac_have_iwevgenie" = yes; then $as_echo "#define HAVE_IW 1" >>confdefs.h IWLIB=-liw fi ac_config_files="$ac_config_files netspeed_applet.spec Makefile icons/Makefile icons/16x16/Makefile icons/16x16/apps/Makefile icons/16x16/devices/Makefile icons/22x22/Makefile icons/22x22/apps/Makefile icons/24x24/Makefile icons/24x24/apps/Makefile icons/24x24/status/Makefile icons/32x32/Makefile icons/32x32/apps/Makefile icons/48x48/Makefile icons/48x48/apps/Makefile icons/scalable/Makefile icons/scalable/apps/Makefile src/Makefile po/Makefile.in help/Makefile" cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure # scripts and configure runs, see configure's option --config-cache. # It is not useful on other systems. If it contains results you don't # want to keep, you may remove or edit it. # # config.status only pays attention to the cache file if you give it # the --recheck option to rerun configure. # # `ac_cv_env_foo' variables (set or unset) will be overridden when # loading this file, other *unset* `ac_cv_foo' will be assigned the # following values. _ACEOF # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. # So, we kill variables containing newlines. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. ( for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( *) { eval $ac_var=; unset $ac_var;} ;; esac ;; esac done (set) 2>&1 | case $as_nl`(ac_space=' '; set) 2>&1` in #( *${as_nl}ac_space=\ *) # `set' does not quote correctly, so add quotes: double-quote # substitution turns \\\\ into \\, and sed turns \\ into \. sed -n \ "s/'/'\\\\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" ;; #( *) # `set' quotes correctly as required by POSIX, so do not add quotes. sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; esac | sort ) | sed ' /^ac_cv_env_/b end t clear :clear s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ t end s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ :end' >>confcache if diff "$cache_file" confcache >/dev/null 2>&1; then :; else if test -w "$cache_file"; then test "x$cache_file" != "x/dev/null" && { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 $as_echo "$as_me: updating cache $cache_file" >&6;} cat confcache >$cache_file else { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 $as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} fi fi rm -f confcache test "x$prefix" = xNONE && prefix=$ac_default_prefix # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' DEFS=-DHAVE_CONFIG_H ac_libobjs= ac_ltlibobjs= for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue # 1. Remove the extension, and $U if already installed. ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' ac_i=`$as_echo "$ac_i" | sed "$ac_script"` # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR # will be set to the directory where LIBOBJS objects are built. as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' done LIBOBJS=$ac_libobjs LTLIBOBJS=$ac_ltlibobjs if test -n "$EXEEXT"; then am__EXEEXT_TRUE= am__EXEEXT_FALSE='#' else am__EXEEXT_TRUE='#' am__EXEEXT_FALSE= fi if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then as_fn_error "conditional \"MAINTAINER_MODE\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then as_fn_error "conditional \"AMDEP\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then as_fn_error "conditional \"am__fastdepCC\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi ac_config_commands="$ac_config_commands po/stamp-it" if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then as_fn_error "conditional \"am__fastdepCC\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${ENABLE_SK_TRUE}" && test -z "${ENABLE_SK_FALSE}"; then as_fn_error "conditional \"ENABLE_SK\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${HAVE_GNOME_DOC_UTILS_TRUE}" && test -z "${HAVE_GNOME_DOC_UTILS_FALSE}"; then as_fn_error "conditional \"HAVE_GNOME_DOC_UTILS\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi : ${CONFIG_STATUS=./config.status} ac_write_fail=0 ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files $CONFIG_STATUS" { $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 $as_echo "$as_me: creating $CONFIG_STATUS" >&6;} as_write_fail=0 cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 #! $SHELL # Generated by $as_me. # Run this file to recreate the current configuration. # Compiler output produced by configure, useful for debugging # configure, is in config.log if it exists. debug=false ac_cs_recheck=false ac_cs_silent=false SHELL=\${CONFIG_SHELL-$SHELL} export SHELL _ASEOF cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 ## -------------------- ## ## M4sh Initialization. ## ## -------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi as_nl=' ' export as_nl # Printing a long string crashes Solaris 7 /usr/bin/printf. as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo # Prefer a ksh shell builtin over an external printf program on Solaris, # but without wasting forks for bash or zsh. if test -z "$BASH_VERSION$ZSH_VERSION" \ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='print -r --' as_echo_n='print -rn --' elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='printf %s\n' as_echo_n='printf %s' else if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' as_echo_n='/usr/ucb/echo -n' else as_echo_body='eval expr "X$1" : "X\\(.*\\)"' as_echo_n_body='eval arg=$1; case $arg in #( *"$as_nl"*) expr "X$arg" : "X\\(.*\\)$as_nl"; arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; esac; expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" ' export as_echo_n_body as_echo_n='sh -c $as_echo_n_body as_echo' fi export as_echo_body as_echo='sh -c $as_echo_body as_echo' fi # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || PATH_SEPARATOR=';' } fi # IFS # We need space, tab and new line, in precisely that order. Quoting is # there to prevent editors from complaining about space-tab. # (If _AS_PATH_WALK were called with IFS unset, it would disable word # splitting by setting IFS to empty value.) IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. case $0 in #(( *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done IFS=$as_save_IFS ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 exit 1 fi # Unset variables that we do not need and which cause bugs (e.g. in # pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" # suppresses any "Segmentation fault" message there. '((' could # trigger a bug in pdksh 5.2.14. for as_var in BASH_ENV ENV MAIL MAILPATH do eval test x\${$as_var+set} = xset \ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. LC_ALL=C export LC_ALL LANGUAGE=C export LANGUAGE # CDPATH. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH # as_fn_error ERROR [LINENO LOG_FD] # --------------------------------- # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are # provided, also output the error to LOG_FD, referencing LINENO. Then exit the # script with status $?, using 1 if that was 0. as_fn_error () { as_status=$?; test $as_status -eq 0 && as_status=1 if test "$3"; then as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3 fi $as_echo "$as_me: error: $1" >&2 as_fn_exit $as_status } # as_fn_error # as_fn_set_status STATUS # ----------------------- # Set $? to STATUS, without forking. as_fn_set_status () { return $1 } # as_fn_set_status # as_fn_exit STATUS # ----------------- # Exit the shell with STATUS, even in a "trap 0" or "set -e" context. as_fn_exit () { set +e as_fn_set_status $1 exit $1 } # as_fn_exit # as_fn_unset VAR # --------------- # Portably unset VAR. as_fn_unset () { { eval $1=; unset $1;} } as_unset=as_fn_unset # as_fn_append VAR VALUE # ---------------------- # Append the text in VALUE to the end of the definition contained in VAR. Take # advantage of any shell optimizations that allow amortized linear growth over # repeated appends, instead of the typical quadratic growth present in naive # implementations. if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : eval 'as_fn_append () { eval $1+=\$2 }' else as_fn_append () { eval $1=\$$1\$2 } fi # as_fn_append # as_fn_arith ARG... # ------------------ # Perform arithmetic evaluation on the ARGs, and store the result in the # global $as_val. Take advantage of shells that can avoid forks. The arguments # must be portable across $(()) and expr. if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : eval 'as_fn_arith () { as_val=$(( $* )) }' else as_fn_arith () { as_val=`expr "$@" || test $? -eq 1` } fi # as_fn_arith if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then as_dirname=dirname else as_dirname=false fi as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || $as_echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in #((((( -n*) case `echo 'xy\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. xy) ECHO_C='\c';; *) echo `echo ksh88 bug on AIX 6.1` > /dev/null ECHO_T=' ';; esac;; *) ECHO_N='-n';; esac rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir mkdir conf$$.dir 2>/dev/null fi if (echo >conf$$.file) 2>/dev/null; then if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. # In both cases, we have to default to `cp -p'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -p' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -p' fi else as_ln_s='cp -p' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null # as_fn_mkdir_p # ------------- # Create "$as_dir" as a directory, including parents if necessary. as_fn_mkdir_p () { case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || eval $as_mkdir_p || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir" } # as_fn_mkdir_p if mkdir -p . 2>/dev/null; then as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false fi if test -x / >/dev/null 2>&1; then as_test_x='test -x' else if ls -dL / >/dev/null 2>&1; then as_ls_L_option=L else as_ls_L_option= fi as_test_x=' eval sh -c '\'' if test -d "$1"; then test -d "$1/."; else case $1 in #( -*)set "./$1";; esac; case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( ???[sx]*):;;*)false;;esac;fi '\'' sh ' fi as_executable_p=$as_test_x # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" exec 6>&1 ## ----------------------------------- ## ## Main body of $CONFIG_STATUS script. ## ## ----------------------------------- ## _ASEOF test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # Save the log message, to keep $0 and so on meaningful, and to # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" This file was extended by netspeed_applet $as_me 0.16, which was generated by GNU Autoconf 2.65. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS CONFIG_LINKS = $CONFIG_LINKS CONFIG_COMMANDS = $CONFIG_COMMANDS $ $0 $@ on `(hostname || uname -n) 2>/dev/null | sed 1q` " _ACEOF case $ac_config_files in *" "*) set x $ac_config_files; shift; ac_config_files=$*;; esac case $ac_config_headers in *" "*) set x $ac_config_headers; shift; ac_config_headers=$*;; esac cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 # Files that config.status was made for. config_files="$ac_config_files" config_headers="$ac_config_headers" config_commands="$ac_config_commands" _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ac_cs_usage="\ \`$as_me' instantiates files and other configuration actions from templates according to the current configuration. Unless the files and actions are specified as TAGs, all are instantiated by default. Usage: $0 [OPTION]... [TAG]... -h, --help print this help, then exit -V, --version print version number and configuration settings, then exit --config print configuration, then exit -q, --quiet, --silent do not print progress messages -d, --debug don't remove temporary files --recheck update $as_me by reconfiguring in the same conditions --file=FILE[:TEMPLATE] instantiate the configuration file FILE --header=FILE[:TEMPLATE] instantiate the configuration header FILE Configuration files: $config_files Configuration headers: $config_headers Configuration commands: $config_commands Report bugs to ." _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" ac_cs_version="\\ netspeed_applet config.status 0.16 configured by $0, generated by GNU Autoconf 2.65, with options \\"\$ac_cs_config\\" Copyright (C) 2009 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." ac_pwd='$ac_pwd' srcdir='$srcdir' INSTALL='$INSTALL' MKDIR_P='$MKDIR_P' AWK='$AWK' test -n "\$AWK" || AWK=awk _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # The default lists apply if the user does not specify any file. ac_need_defaults=: while test $# != 0 do case $1 in --*=*) ac_option=`expr "X$1" : 'X\([^=]*\)='` ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` ac_shift=: ;; *) ac_option=$1 ac_optarg=$2 ac_shift=shift ;; esac case $ac_option in # Handling of the options. -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ac_cs_recheck=: ;; --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) $as_echo "$ac_cs_version"; exit ;; --config | --confi | --conf | --con | --co | --c ) $as_echo "$ac_cs_config"; exit ;; --debug | --debu | --deb | --de | --d | -d ) debug=: ;; --file | --fil | --fi | --f ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; esac as_fn_append CONFIG_FILES " '$ac_optarg'" ac_need_defaults=false;; --header | --heade | --head | --hea ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; esac as_fn_append CONFIG_HEADERS " '$ac_optarg'" ac_need_defaults=false;; --he | --h) # Conflict between --help and --header as_fn_error "ambiguous option: \`$1' Try \`$0 --help' for more information.";; --help | --hel | -h ) $as_echo "$ac_cs_usage"; exit ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil | --si | --s) ac_cs_silent=: ;; # This is an error. -*) as_fn_error "unrecognized option: \`$1' Try \`$0 --help' for more information." ;; *) as_fn_append ac_config_targets " $1" ac_need_defaults=false ;; esac shift done ac_configure_extra_args= if $ac_cs_silent; then exec 6>/dev/null ac_configure_extra_args="$ac_configure_extra_args --silent" fi _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 if \$ac_cs_recheck; then set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion shift \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 CONFIG_SHELL='$SHELL' export CONFIG_SHELL exec "\$@" fi _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 exec 5>>config.log { echo sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX ## Running $as_me. ## _ASBOX $as_echo "$ac_log" } >&5 _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 # # INIT-COMMANDS # AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH sed_quote_subst='$sed_quote_subst' double_quote_subst='$double_quote_subst' delay_variable_subst='$delay_variable_subst' macro_version='`$ECHO "X$macro_version" | $Xsed -e "$delay_single_quote_subst"`' macro_revision='`$ECHO "X$macro_revision" | $Xsed -e "$delay_single_quote_subst"`' enable_shared='`$ECHO "X$enable_shared" | $Xsed -e "$delay_single_quote_subst"`' enable_static='`$ECHO "X$enable_static" | $Xsed -e "$delay_single_quote_subst"`' pic_mode='`$ECHO "X$pic_mode" | $Xsed -e "$delay_single_quote_subst"`' enable_fast_install='`$ECHO "X$enable_fast_install" | $Xsed -e "$delay_single_quote_subst"`' host_alias='`$ECHO "X$host_alias" | $Xsed -e "$delay_single_quote_subst"`' host='`$ECHO "X$host" | $Xsed -e "$delay_single_quote_subst"`' host_os='`$ECHO "X$host_os" | $Xsed -e "$delay_single_quote_subst"`' build_alias='`$ECHO "X$build_alias" | $Xsed -e "$delay_single_quote_subst"`' build='`$ECHO "X$build" | $Xsed -e "$delay_single_quote_subst"`' build_os='`$ECHO "X$build_os" | $Xsed -e "$delay_single_quote_subst"`' SED='`$ECHO "X$SED" | $Xsed -e "$delay_single_quote_subst"`' Xsed='`$ECHO "X$Xsed" | $Xsed -e "$delay_single_quote_subst"`' GREP='`$ECHO "X$GREP" | $Xsed -e "$delay_single_quote_subst"`' EGREP='`$ECHO "X$EGREP" | $Xsed -e "$delay_single_quote_subst"`' FGREP='`$ECHO "X$FGREP" | $Xsed -e "$delay_single_quote_subst"`' LD='`$ECHO "X$LD" | $Xsed -e "$delay_single_quote_subst"`' NM='`$ECHO "X$NM" | $Xsed -e "$delay_single_quote_subst"`' LN_S='`$ECHO "X$LN_S" | $Xsed -e "$delay_single_quote_subst"`' max_cmd_len='`$ECHO "X$max_cmd_len" | $Xsed -e "$delay_single_quote_subst"`' ac_objext='`$ECHO "X$ac_objext" | $Xsed -e "$delay_single_quote_subst"`' exeext='`$ECHO "X$exeext" | $Xsed -e "$delay_single_quote_subst"`' lt_unset='`$ECHO "X$lt_unset" | $Xsed -e "$delay_single_quote_subst"`' lt_SP2NL='`$ECHO "X$lt_SP2NL" | $Xsed -e "$delay_single_quote_subst"`' lt_NL2SP='`$ECHO "X$lt_NL2SP" | $Xsed -e "$delay_single_quote_subst"`' reload_flag='`$ECHO "X$reload_flag" | $Xsed -e "$delay_single_quote_subst"`' reload_cmds='`$ECHO "X$reload_cmds" | $Xsed -e "$delay_single_quote_subst"`' OBJDUMP='`$ECHO "X$OBJDUMP" | $Xsed -e "$delay_single_quote_subst"`' deplibs_check_method='`$ECHO "X$deplibs_check_method" | $Xsed -e "$delay_single_quote_subst"`' file_magic_cmd='`$ECHO "X$file_magic_cmd" | $Xsed -e "$delay_single_quote_subst"`' AR='`$ECHO "X$AR" | $Xsed -e "$delay_single_quote_subst"`' AR_FLAGS='`$ECHO "X$AR_FLAGS" | $Xsed -e "$delay_single_quote_subst"`' STRIP='`$ECHO "X$STRIP" | $Xsed -e "$delay_single_quote_subst"`' RANLIB='`$ECHO "X$RANLIB" | $Xsed -e "$delay_single_quote_subst"`' old_postinstall_cmds='`$ECHO "X$old_postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' old_postuninstall_cmds='`$ECHO "X$old_postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' old_archive_cmds='`$ECHO "X$old_archive_cmds" | $Xsed -e "$delay_single_quote_subst"`' CC='`$ECHO "X$CC" | $Xsed -e "$delay_single_quote_subst"`' CFLAGS='`$ECHO "X$CFLAGS" | $Xsed -e "$delay_single_quote_subst"`' compiler='`$ECHO "X$compiler" | $Xsed -e "$delay_single_quote_subst"`' GCC='`$ECHO "X$GCC" | $Xsed -e "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_pipe='`$ECHO "X$lt_cv_sys_global_symbol_pipe" | $Xsed -e "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_to_cdecl='`$ECHO "X$lt_cv_sys_global_symbol_to_cdecl" | $Xsed -e "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address" | $Xsed -e "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`' objdir='`$ECHO "X$objdir" | $Xsed -e "$delay_single_quote_subst"`' SHELL='`$ECHO "X$SHELL" | $Xsed -e "$delay_single_quote_subst"`' ECHO='`$ECHO "X$ECHO" | $Xsed -e "$delay_single_quote_subst"`' MAGIC_CMD='`$ECHO "X$MAGIC_CMD" | $Xsed -e "$delay_single_quote_subst"`' lt_prog_compiler_no_builtin_flag='`$ECHO "X$lt_prog_compiler_no_builtin_flag" | $Xsed -e "$delay_single_quote_subst"`' lt_prog_compiler_wl='`$ECHO "X$lt_prog_compiler_wl" | $Xsed -e "$delay_single_quote_subst"`' lt_prog_compiler_pic='`$ECHO "X$lt_prog_compiler_pic" | $Xsed -e "$delay_single_quote_subst"`' lt_prog_compiler_static='`$ECHO "X$lt_prog_compiler_static" | $Xsed -e "$delay_single_quote_subst"`' lt_cv_prog_compiler_c_o='`$ECHO "X$lt_cv_prog_compiler_c_o" | $Xsed -e "$delay_single_quote_subst"`' need_locks='`$ECHO "X$need_locks" | $Xsed -e "$delay_single_quote_subst"`' DSYMUTIL='`$ECHO "X$DSYMUTIL" | $Xsed -e "$delay_single_quote_subst"`' NMEDIT='`$ECHO "X$NMEDIT" | $Xsed -e "$delay_single_quote_subst"`' LIPO='`$ECHO "X$LIPO" | $Xsed -e "$delay_single_quote_subst"`' OTOOL='`$ECHO "X$OTOOL" | $Xsed -e "$delay_single_quote_subst"`' OTOOL64='`$ECHO "X$OTOOL64" | $Xsed -e "$delay_single_quote_subst"`' libext='`$ECHO "X$libext" | $Xsed -e "$delay_single_quote_subst"`' shrext_cmds='`$ECHO "X$shrext_cmds" | $Xsed -e "$delay_single_quote_subst"`' extract_expsyms_cmds='`$ECHO "X$extract_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`' archive_cmds_need_lc='`$ECHO "X$archive_cmds_need_lc" | $Xsed -e "$delay_single_quote_subst"`' enable_shared_with_static_runtimes='`$ECHO "X$enable_shared_with_static_runtimes" | $Xsed -e "$delay_single_quote_subst"`' export_dynamic_flag_spec='`$ECHO "X$export_dynamic_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' whole_archive_flag_spec='`$ECHO "X$whole_archive_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' compiler_needs_object='`$ECHO "X$compiler_needs_object" | $Xsed -e "$delay_single_quote_subst"`' old_archive_from_new_cmds='`$ECHO "X$old_archive_from_new_cmds" | $Xsed -e "$delay_single_quote_subst"`' old_archive_from_expsyms_cmds='`$ECHO "X$old_archive_from_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`' archive_cmds='`$ECHO "X$archive_cmds" | $Xsed -e "$delay_single_quote_subst"`' archive_expsym_cmds='`$ECHO "X$archive_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`' module_cmds='`$ECHO "X$module_cmds" | $Xsed -e "$delay_single_quote_subst"`' module_expsym_cmds='`$ECHO "X$module_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`' with_gnu_ld='`$ECHO "X$with_gnu_ld" | $Xsed -e "$delay_single_quote_subst"`' allow_undefined_flag='`$ECHO "X$allow_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`' no_undefined_flag='`$ECHO "X$no_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`' hardcode_libdir_flag_spec='`$ECHO "X$hardcode_libdir_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' hardcode_libdir_flag_spec_ld='`$ECHO "X$hardcode_libdir_flag_spec_ld" | $Xsed -e "$delay_single_quote_subst"`' hardcode_libdir_separator='`$ECHO "X$hardcode_libdir_separator" | $Xsed -e "$delay_single_quote_subst"`' hardcode_direct='`$ECHO "X$hardcode_direct" | $Xsed -e "$delay_single_quote_subst"`' hardcode_direct_absolute='`$ECHO "X$hardcode_direct_absolute" | $Xsed -e "$delay_single_quote_subst"`' hardcode_minus_L='`$ECHO "X$hardcode_minus_L" | $Xsed -e "$delay_single_quote_subst"`' hardcode_shlibpath_var='`$ECHO "X$hardcode_shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`' hardcode_automatic='`$ECHO "X$hardcode_automatic" | $Xsed -e "$delay_single_quote_subst"`' inherit_rpath='`$ECHO "X$inherit_rpath" | $Xsed -e "$delay_single_quote_subst"`' link_all_deplibs='`$ECHO "X$link_all_deplibs" | $Xsed -e "$delay_single_quote_subst"`' fix_srcfile_path='`$ECHO "X$fix_srcfile_path" | $Xsed -e "$delay_single_quote_subst"`' always_export_symbols='`$ECHO "X$always_export_symbols" | $Xsed -e "$delay_single_quote_subst"`' export_symbols_cmds='`$ECHO "X$export_symbols_cmds" | $Xsed -e "$delay_single_quote_subst"`' exclude_expsyms='`$ECHO "X$exclude_expsyms" | $Xsed -e "$delay_single_quote_subst"`' include_expsyms='`$ECHO "X$include_expsyms" | $Xsed -e "$delay_single_quote_subst"`' prelink_cmds='`$ECHO "X$prelink_cmds" | $Xsed -e "$delay_single_quote_subst"`' file_list_spec='`$ECHO "X$file_list_spec" | $Xsed -e "$delay_single_quote_subst"`' variables_saved_for_relink='`$ECHO "X$variables_saved_for_relink" | $Xsed -e "$delay_single_quote_subst"`' need_lib_prefix='`$ECHO "X$need_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`' need_version='`$ECHO "X$need_version" | $Xsed -e "$delay_single_quote_subst"`' version_type='`$ECHO "X$version_type" | $Xsed -e "$delay_single_quote_subst"`' runpath_var='`$ECHO "X$runpath_var" | $Xsed -e "$delay_single_quote_subst"`' shlibpath_var='`$ECHO "X$shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`' shlibpath_overrides_runpath='`$ECHO "X$shlibpath_overrides_runpath" | $Xsed -e "$delay_single_quote_subst"`' libname_spec='`$ECHO "X$libname_spec" | $Xsed -e "$delay_single_quote_subst"`' library_names_spec='`$ECHO "X$library_names_spec" | $Xsed -e "$delay_single_quote_subst"`' soname_spec='`$ECHO "X$soname_spec" | $Xsed -e "$delay_single_quote_subst"`' postinstall_cmds='`$ECHO "X$postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' postuninstall_cmds='`$ECHO "X$postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' finish_cmds='`$ECHO "X$finish_cmds" | $Xsed -e "$delay_single_quote_subst"`' finish_eval='`$ECHO "X$finish_eval" | $Xsed -e "$delay_single_quote_subst"`' hardcode_into_libs='`$ECHO "X$hardcode_into_libs" | $Xsed -e "$delay_single_quote_subst"`' sys_lib_search_path_spec='`$ECHO "X$sys_lib_search_path_spec" | $Xsed -e "$delay_single_quote_subst"`' sys_lib_dlsearch_path_spec='`$ECHO "X$sys_lib_dlsearch_path_spec" | $Xsed -e "$delay_single_quote_subst"`' hardcode_action='`$ECHO "X$hardcode_action" | $Xsed -e "$delay_single_quote_subst"`' enable_dlopen='`$ECHO "X$enable_dlopen" | $Xsed -e "$delay_single_quote_subst"`' enable_dlopen_self='`$ECHO "X$enable_dlopen_self" | $Xsed -e "$delay_single_quote_subst"`' enable_dlopen_self_static='`$ECHO "X$enable_dlopen_self_static" | $Xsed -e "$delay_single_quote_subst"`' old_striplib='`$ECHO "X$old_striplib" | $Xsed -e "$delay_single_quote_subst"`' striplib='`$ECHO "X$striplib" | $Xsed -e "$delay_single_quote_subst"`' LTCC='$LTCC' LTCFLAGS='$LTCFLAGS' compiler='$compiler_DEFAULT' # Quote evaled strings. for var in SED \ GREP \ EGREP \ FGREP \ LD \ NM \ LN_S \ lt_SP2NL \ lt_NL2SP \ reload_flag \ OBJDUMP \ deplibs_check_method \ file_magic_cmd \ AR \ AR_FLAGS \ STRIP \ RANLIB \ CC \ CFLAGS \ compiler \ lt_cv_sys_global_symbol_pipe \ lt_cv_sys_global_symbol_to_cdecl \ lt_cv_sys_global_symbol_to_c_name_address \ lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ SHELL \ ECHO \ lt_prog_compiler_no_builtin_flag \ lt_prog_compiler_wl \ lt_prog_compiler_pic \ lt_prog_compiler_static \ lt_cv_prog_compiler_c_o \ need_locks \ DSYMUTIL \ NMEDIT \ LIPO \ OTOOL \ OTOOL64 \ shrext_cmds \ export_dynamic_flag_spec \ whole_archive_flag_spec \ compiler_needs_object \ with_gnu_ld \ allow_undefined_flag \ no_undefined_flag \ hardcode_libdir_flag_spec \ hardcode_libdir_flag_spec_ld \ hardcode_libdir_separator \ fix_srcfile_path \ exclude_expsyms \ include_expsyms \ file_list_spec \ variables_saved_for_relink \ libname_spec \ library_names_spec \ soname_spec \ finish_eval \ old_striplib \ striplib; do case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in *[\\\\\\\`\\"\\\$]*) eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ;; esac done # Double-quote double-evaled strings. for var in reload_cmds \ old_postinstall_cmds \ old_postuninstall_cmds \ old_archive_cmds \ extract_expsyms_cmds \ old_archive_from_new_cmds \ old_archive_from_expsyms_cmds \ archive_cmds \ archive_expsym_cmds \ module_cmds \ module_expsym_cmds \ export_symbols_cmds \ prelink_cmds \ postinstall_cmds \ postuninstall_cmds \ finish_cmds \ sys_lib_search_path_spec \ sys_lib_dlsearch_path_spec; do case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in *[\\\\\\\`\\"\\\$]*) eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ;; esac done # Fix-up fallback echo if it was mangled by the above quoting rules. case \$lt_ECHO in *'\\\$0 --fallback-echo"') lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\$0 --fallback-echo"\$/\$0 --fallback-echo"/'\` ;; esac ac_aux_dir='$ac_aux_dir' xsi_shell='$xsi_shell' lt_shell_append='$lt_shell_append' # See if we are running on zsh, and set the options which allow our # commands through without removal of \ escapes INIT. if test -n "\${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi PACKAGE='$PACKAGE' VERSION='$VERSION' TIMESTAMP='$TIMESTAMP' RM='$RM' ofile='$ofile' _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # Handling of arguments. for ac_config_target in $ac_config_targets do case $ac_config_target in "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; "default-1") CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;; "netspeed_applet.spec") CONFIG_FILES="$CONFIG_FILES netspeed_applet.spec" ;; "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; "icons/Makefile") CONFIG_FILES="$CONFIG_FILES icons/Makefile" ;; "icons/16x16/Makefile") CONFIG_FILES="$CONFIG_FILES icons/16x16/Makefile" ;; "icons/16x16/apps/Makefile") CONFIG_FILES="$CONFIG_FILES icons/16x16/apps/Makefile" ;; "icons/16x16/devices/Makefile") CONFIG_FILES="$CONFIG_FILES icons/16x16/devices/Makefile" ;; "icons/22x22/Makefile") CONFIG_FILES="$CONFIG_FILES icons/22x22/Makefile" ;; "icons/22x22/apps/Makefile") CONFIG_FILES="$CONFIG_FILES icons/22x22/apps/Makefile" ;; "icons/24x24/Makefile") CONFIG_FILES="$CONFIG_FILES icons/24x24/Makefile" ;; "icons/24x24/apps/Makefile") CONFIG_FILES="$CONFIG_FILES icons/24x24/apps/Makefile" ;; "icons/24x24/status/Makefile") CONFIG_FILES="$CONFIG_FILES icons/24x24/status/Makefile" ;; "icons/32x32/Makefile") CONFIG_FILES="$CONFIG_FILES icons/32x32/Makefile" ;; "icons/32x32/apps/Makefile") CONFIG_FILES="$CONFIG_FILES icons/32x32/apps/Makefile" ;; "icons/48x48/Makefile") CONFIG_FILES="$CONFIG_FILES icons/48x48/Makefile" ;; "icons/48x48/apps/Makefile") CONFIG_FILES="$CONFIG_FILES icons/48x48/apps/Makefile" ;; "icons/scalable/Makefile") CONFIG_FILES="$CONFIG_FILES icons/scalable/Makefile" ;; "icons/scalable/apps/Makefile") CONFIG_FILES="$CONFIG_FILES icons/scalable/apps/Makefile" ;; "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; "po/Makefile.in") CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;; "help/Makefile") CONFIG_FILES="$CONFIG_FILES help/Makefile" ;; "po/stamp-it") CONFIG_COMMANDS="$CONFIG_COMMANDS po/stamp-it" ;; *) as_fn_error "invalid argument: \`$ac_config_target'" "$LINENO" 5;; esac done # If the user did not use the arguments to specify the items to instantiate, # then the envvar interface is used. Set only those that are not. # We use the long form for the default assignment because of an extremely # bizarre bug on SunOS 4.1.3. if $ac_need_defaults; then test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands fi # Have a temporary directory for convenience. Make it in the build tree # simply because there is no reason against having it here, and in addition, # creating and moving files from /tmp can sometimes cause problems. # Hook for its removal unless debugging. # Note that there is a small window in which the directory will not be cleaned: # after its creation but before its name has been assigned to `$tmp'. $debug || { tmp= trap 'exit_status=$? { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status ' 0 trap 'as_fn_exit 1' 1 2 13 15 } # Create a (secure) tmp directory for tmp files. { tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" } || { tmp=./conf$$-$RANDOM (umask 077 && mkdir "$tmp") } || as_fn_error "cannot create a temporary directory in ." "$LINENO" 5 # Set up the scripts for CONFIG_FILES section. # No need to generate them if there are no CONFIG_FILES. # This happens for instance with `./config.status config.h'. if test -n "$CONFIG_FILES"; then ac_cr=`echo X | tr X '\015'` # On cygwin, bash can eat \r inside `` if the user requested igncr. # But we know of no other shell where ac_cr would be empty at this # point, so we can use a bashism as a fallback. if test "x$ac_cr" = x; then eval ac_cr=\$\'\\r\' fi ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then ac_cs_awk_cr='\r' else ac_cs_awk_cr=$ac_cr fi echo 'BEGIN {' >"$tmp/subs1.awk" && _ACEOF { echo "cat >conf$$subs.awk <<_ACEOF" && echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && echo "_ACEOF" } >conf$$subs.sh || as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5 ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'` ac_delim='%!_!# ' for ac_last_try in false false false false false :; do . ./conf$$subs.sh || as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5 ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` if test $ac_delim_n = $ac_delim_num; then break elif $ac_last_try; then as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5 else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi done rm -f conf$$subs.sh cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 cat >>"\$tmp/subs1.awk" <<\\_ACAWK && _ACEOF sed -n ' h s/^/S["/; s/!.*/"]=/ p g s/^[^!]*!// :repl t repl s/'"$ac_delim"'$// t delim :nl h s/\(.\{148\}\)..*/\1/ t more1 s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ p n b repl :more1 s/["\\]/\\&/g; s/^/"/; s/$/"\\/ p g s/.\{148\}// t nl :delim h s/\(.\{148\}\)..*/\1/ t more2 s/["\\]/\\&/g; s/^/"/; s/$/"/ p b :more2 s/["\\]/\\&/g; s/^/"/; s/$/"\\/ p g s/.\{148\}// t delim ' >$CONFIG_STATUS || ac_write_fail=1 rm -f conf$$subs.awk cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 _ACAWK cat >>"\$tmp/subs1.awk" <<_ACAWK && for (key in S) S_is_set[key] = 1 FS = "" } { line = $ 0 nfields = split(line, field, "@") substed = 0 len = length(field[1]) for (i = 2; i < nfields; i++) { key = field[i] keylen = length(key) if (S_is_set[key]) { value = S[key] line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) len += length(value) + length(field[++i]) substed = 1 } else len += 1 + keylen } print line } _ACAWK _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" else cat fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \ || as_fn_error "could not setup config files machinery" "$LINENO" 5 _ACEOF # VPATH may cause trouble with some makes, so we remove $(srcdir), # ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and # trailing colons and then remove the whole line if VPATH becomes empty # (actually we leave an empty line to preserve line numbers). if test "x$srcdir" = x.; then ac_vpsub='/^[ ]*VPATH[ ]*=/{ s/:*\$(srcdir):*/:/ s/:*\${srcdir}:*/:/ s/:*@srcdir@:*/:/ s/^\([^=]*=[ ]*\):*/\1/ s/:*$// s/^[^=]*=[ ]*$// }' fi cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 fi # test -n "$CONFIG_FILES" # Set up the scripts for CONFIG_HEADERS section. # No need to generate them if there are no CONFIG_HEADERS. # This happens for instance with `./config.status Makefile'. if test -n "$CONFIG_HEADERS"; then cat >"$tmp/defines.awk" <<\_ACAWK || BEGIN { _ACEOF # Transform confdefs.h into an awk script `defines.awk', embedded as # here-document in config.status, that substitutes the proper values into # config.h.in to produce config.h. # Create a delimiter string that does not exist in confdefs.h, to ease # handling of long lines. ac_delim='%!_!# ' for ac_last_try in false false :; do ac_t=`sed -n "/$ac_delim/p" confdefs.h` if test -z "$ac_t"; then break elif $ac_last_try; then as_fn_error "could not make $CONFIG_HEADERS" "$LINENO" 5 else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi done # For the awk script, D is an array of macro values keyed by name, # likewise P contains macro parameters if any. Preserve backslash # newline sequences. ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* sed -n ' s/.\{148\}/&'"$ac_delim"'/g t rset :rset s/^[ ]*#[ ]*define[ ][ ]*/ / t def d :def s/\\$// t bsnl s/["\\]/\\&/g s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ D["\1"]=" \3"/p s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p d :bsnl s/["\\]/\\&/g s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ D["\1"]=" \3\\\\\\n"\\/p t cont s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p t cont d :cont n s/.\{148\}/&'"$ac_delim"'/g t clear :clear s/\\$// t bsnlc s/["\\]/\\&/g; s/^/"/; s/$/"/p d :bsnlc s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p b cont ' >$CONFIG_STATUS || ac_write_fail=1 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 for (key in D) D_is_set[key] = 1 FS = "" } /^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { line = \$ 0 split(line, arg, " ") if (arg[1] == "#") { defundef = arg[2] mac1 = arg[3] } else { defundef = substr(arg[1], 2) mac1 = arg[2] } split(mac1, mac2, "(") #) macro = mac2[1] prefix = substr(line, 1, index(line, defundef) - 1) if (D_is_set[macro]) { # Preserve the white space surrounding the "#". print prefix "define", macro P[macro] D[macro] next } else { # Replace #undef with comments. This is necessary, for example, # in the case of _POSIX_SOURCE, which is predefined and required # on some systems where configure will not decide to define it. if (defundef == "undef") { print "/*", prefix defundef, macro, "*/" next } } } { print } _ACAWK _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 as_fn_error "could not setup config headers machinery" "$LINENO" 5 fi # test -n "$CONFIG_HEADERS" eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" shift for ac_tag do case $ac_tag in :[FHLC]) ac_mode=$ac_tag; continue;; esac case $ac_mode$ac_tag in :[FHL]*:*);; :L* | :C*:*) as_fn_error "invalid tag \`$ac_tag'" "$LINENO" 5;; :[FH]-) ac_tag=-:-;; :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; esac ac_save_IFS=$IFS IFS=: set x $ac_tag IFS=$ac_save_IFS shift ac_file=$1 shift case $ac_mode in :L) ac_source=$1;; :[FH]) ac_file_inputs= for ac_f do case $ac_f in -) ac_f="$tmp/stdin";; *) # Look for the file first in the build tree, then in the source tree # (if the path is not absolute). The absolute path cannot be DOS-style, # because $ac_f cannot contain `:'. test -f "$ac_f" || case $ac_f in [\\/$]*) false;; *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; esac || as_fn_error "cannot find input file: \`$ac_f'" "$LINENO" 5;; esac case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac as_fn_append ac_file_inputs " '$ac_f'" done # Let's still pretend it is `configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ configure_input='Generated from '` $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' `' by configure.' if test x"$ac_file" != x-; then configure_input="$ac_file. $configure_input" { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 $as_echo "$as_me: creating $ac_file" >&6;} fi # Neutralize special characters interpreted by sed in replacement strings. case $configure_input in #( *\&* | *\|* | *\\* ) ac_sed_conf_input=`$as_echo "$configure_input" | sed 's/[\\\\&|]/\\\\&/g'`;; #( *) ac_sed_conf_input=$configure_input;; esac case $ac_tag in *:-:* | *:-) cat >"$tmp/stdin" \ || as_fn_error "could not create $ac_file" "$LINENO" 5 ;; esac ;; esac ac_dir=`$as_dirname -- "$ac_file" || $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_file" : 'X\(//\)[^/]' \| \ X"$ac_file" : 'X\(//\)$' \| \ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$ac_file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` as_dir="$ac_dir"; as_fn_mkdir_p ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix case $ac_mode in :F) # # CONFIG_FILE # case $INSTALL in [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; esac ac_MKDIR_P=$MKDIR_P case $MKDIR_P in [\\/$]* | ?:[\\/]* ) ;; */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; esac _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # If the template does not know about datarootdir, expand it. # FIXME: This hack should be removed a few years after 2.60. ac_datarootdir_hack=; ac_datarootdir_seen= ac_sed_dataroot=' /datarootdir/ { p q } /@datadir@/p /@docdir@/p /@infodir@/p /@localedir@/p /@mandir@/p' case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in *datarootdir*) ac_datarootdir_seen=yes;; *@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 $as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_datarootdir_hack=' s&@datadir@&$datadir&g s&@docdir@&$docdir&g s&@infodir@&$infodir&g s&@localedir@&$localedir&g s&@mandir@&$mandir&g s&\\\${datarootdir}&$datarootdir&g' ;; esac _ACEOF # Neutralize VPATH when `$srcdir' = `.'. # Shell code in configure.ac might set extrasub. # FIXME: do we really want to maintain this feature? cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_sed_extra="$ac_vpsub $extrasub _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 :t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b s|@configure_input@|$ac_sed_conf_input|;t t s&@top_builddir@&$ac_top_builddir_sub&;t t s&@top_build_prefix@&$ac_top_build_prefix&;t t s&@srcdir@&$ac_srcdir&;t t s&@abs_srcdir@&$ac_abs_srcdir&;t t s&@top_srcdir@&$ac_top_srcdir&;t t s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t s&@builddir@&$ac_builddir&;t t s&@abs_builddir@&$ac_abs_builddir&;t t s&@abs_top_builddir@&$ac_abs_top_builddir&;t t s&@INSTALL@&$ac_INSTALL&;t t s&@MKDIR_P@&$ac_MKDIR_P&;t t $ac_datarootdir_hack " eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \ || as_fn_error "could not create $ac_file" "$LINENO" 5 test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined." >&5 $as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined." >&2;} rm -f "$tmp/stdin" case $ac_file in -) cat "$tmp/out" && rm -f "$tmp/out";; *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";; esac \ || as_fn_error "could not create $ac_file" "$LINENO" 5 ;; :H) # # CONFIG_HEADER # if test x"$ac_file" != x-; then { $as_echo "/* $configure_input */" \ && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" } >"$tmp/config.h" \ || as_fn_error "could not create $ac_file" "$LINENO" 5 if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 $as_echo "$as_me: $ac_file is unchanged" >&6;} else rm -f "$ac_file" mv "$tmp/config.h" "$ac_file" \ || as_fn_error "could not create $ac_file" "$LINENO" 5 fi else $as_echo "/* $configure_input */" \ && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \ || as_fn_error "could not create -" "$LINENO" 5 fi # Compute "$ac_file"'s index in $config_headers. _am_arg="$ac_file" _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in $_am_arg | $_am_arg:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || $as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$_am_arg" : 'X\(//\)[^/]' \| \ X"$_am_arg" : 'X\(//\)$' \| \ X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$_am_arg" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'`/stamp-h$_am_stamp_count ;; :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 $as_echo "$as_me: executing $ac_file commands" >&6;} ;; esac case $ac_file$ac_mode in "depfiles":C) test x"$AMDEP_TRUE" != x"" || { # Autoconf 2.62 quotes --file arguments for eval, but not when files # are listed without --file. Let's play safe and only enable the eval # if we detect the quoting. case $CONFIG_FILES in *\'*) eval set x "$CONFIG_FILES" ;; *) set x $CONFIG_FILES ;; esac shift for mf do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. # We used to match only the files named `Makefile.in', but # some people rename them; so instead we look at the file content. # Grep'ing the first line is not enough: some people post-process # each Makefile.in and add a new line on top of each file to say so. # Grep'ing the whole file is not good either: AIX grep has a line # limit of 2048, but all sed's we know have understand at least 4000. if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then dirpart=`$as_dirname -- "$mf" || $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$mf" : 'X\(//\)[^/]' \| \ X"$mf" : 'X\(//\)$' \| \ X"$mf" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$mf" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` else continue fi # Extract the definition of DEPDIR, am__include, and am__quote # from the Makefile without running `make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue am__include=`sed -n 's/^am__include = //p' < "$mf"` test -z "am__include" && continue am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n 's/^U = //p' < "$mf"` # Find all dependency output files, they are included files with # $(DEPDIR) in their names. We invoke sed twice because it is the # simplest approach to changing $(DEPDIR) to its actual value in the # expansion. for file in `sed -n " s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`$as_dirname -- "$file" || $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$file" : 'X\(//\)[^/]' \| \ X"$file" : 'X\(//\)$' \| \ X"$file" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` as_dir=$dirpart/$fdir; as_fn_mkdir_p # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done } ;; "libtool":C) # See if we are running on zsh, and set the options which allow our # commands through without removal of \ escapes. if test -n "${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi cfgfile="${ofile}T" trap "$RM \"$cfgfile\"; exit 1" 1 2 15 $RM "$cfgfile" cat <<_LT_EOF >> "$cfgfile" #! $SHELL # `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. # Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: # NOTE: Changes made to this file will be lost: look at ltmain.sh. # # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, # 2006, 2007, 2008 Free Software Foundation, Inc. # Written by Gordon Matzigkeit, 1996 # # This file is part of GNU Libtool. # # GNU Libtool is free software; you can redistribute it and/or # modify it under the terms of the GNU General Public License as # published by the Free Software Foundation; either version 2 of # the License, or (at your option) any later version. # # As a special exception to the GNU General Public License, # if you distribute this file as part of a program or library that # is built using GNU Libtool, you may include this file under the # same distribution terms that you use for the rest of that program. # # GNU Libtool is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with GNU Libtool; see the file COPYING. If not, a copy # can be downloaded from http://www.gnu.org/licenses/gpl.html, or # obtained by writing to the Free Software Foundation, Inc., # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. # The names of the tagged configurations supported by this script. available_tags="" # ### BEGIN LIBTOOL CONFIG # Which release of libtool.m4 was used? macro_version=$macro_version macro_revision=$macro_revision # Whether or not to build shared libraries. build_libtool_libs=$enable_shared # Whether or not to build static libraries. build_old_libs=$enable_static # What type of objects to build. pic_mode=$pic_mode # Whether or not to optimize for fast installation. fast_install=$enable_fast_install # The host system. host_alias=$host_alias host=$host host_os=$host_os # The build system. build_alias=$build_alias build=$build build_os=$build_os # A sed program that does not truncate output. SED=$lt_SED # Sed that helps us avoid accidentally triggering echo(1) options like -n. Xsed="\$SED -e 1s/^X//" # A grep program that handles long lines. GREP=$lt_GREP # An ERE matcher. EGREP=$lt_EGREP # A literal string matcher. FGREP=$lt_FGREP # A BSD- or MS-compatible name lister. NM=$lt_NM # Whether we need soft or hard links. LN_S=$lt_LN_S # What is the maximum length of a command? max_cmd_len=$max_cmd_len # Object file suffix (normally "o"). objext=$ac_objext # Executable file suffix (normally ""). exeext=$exeext # whether the shell understands "unset". lt_unset=$lt_unset # turn spaces into newlines. SP2NL=$lt_lt_SP2NL # turn newlines into spaces. NL2SP=$lt_lt_NL2SP # How to create reloadable object files. reload_flag=$lt_reload_flag reload_cmds=$lt_reload_cmds # An object symbol dumper. OBJDUMP=$lt_OBJDUMP # Method to check whether dependent libraries are shared objects. deplibs_check_method=$lt_deplibs_check_method # Command to use when deplibs_check_method == "file_magic". file_magic_cmd=$lt_file_magic_cmd # The archiver. AR=$lt_AR AR_FLAGS=$lt_AR_FLAGS # A symbol stripping program. STRIP=$lt_STRIP # Commands used to install an old-style archive. RANLIB=$lt_RANLIB old_postinstall_cmds=$lt_old_postinstall_cmds old_postuninstall_cmds=$lt_old_postuninstall_cmds # A C compiler. LTCC=$lt_CC # LTCC compiler flags. LTCFLAGS=$lt_CFLAGS # Take the output of nm and produce a listing of raw symbols and C names. global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe # Transform the output of nm in a proper C declaration. global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl # Transform the output of nm in a C name address pair. global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # Transform the output of nm in a C name address pair when lib prefix is needed. global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix # The name of the directory that contains temporary libtool files. objdir=$objdir # Shell to use when invoking shell scripts. SHELL=$lt_SHELL # An echo program that does not interpret backslashes. ECHO=$lt_ECHO # Used to examine libraries when file_magic_cmd begins with "file". MAGIC_CMD=$MAGIC_CMD # Must we lock files when doing compilation? need_locks=$lt_need_locks # Tool to manipulate archived DWARF debug symbol files on Mac OS X. DSYMUTIL=$lt_DSYMUTIL # Tool to change global to local symbols on Mac OS X. NMEDIT=$lt_NMEDIT # Tool to manipulate fat objects and archives on Mac OS X. LIPO=$lt_LIPO # ldd/readelf like tool for Mach-O binaries on Mac OS X. OTOOL=$lt_OTOOL # ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4. OTOOL64=$lt_OTOOL64 # Old archive suffix (normally "a"). libext=$libext # Shared library suffix (normally ".so"). shrext_cmds=$lt_shrext_cmds # The commands to extract the exported symbol list from a shared archive. extract_expsyms_cmds=$lt_extract_expsyms_cmds # Variables whose values should be saved in libtool wrapper scripts and # restored at link time. variables_saved_for_relink=$lt_variables_saved_for_relink # Do we need the "lib" prefix for modules? need_lib_prefix=$need_lib_prefix # Do we need a version for libraries? need_version=$need_version # Library versioning type. version_type=$version_type # Shared library runtime path variable. runpath_var=$runpath_var # Shared library path variable. shlibpath_var=$shlibpath_var # Is shlibpath searched before the hard-coded library search path? shlibpath_overrides_runpath=$shlibpath_overrides_runpath # Format of library name prefix. libname_spec=$lt_libname_spec # List of archive names. First name is the real one, the rest are links. # The last name is the one that the linker finds with -lNAME library_names_spec=$lt_library_names_spec # The coded name of the library, if different from the real name. soname_spec=$lt_soname_spec # Command to use after installation of a shared archive. postinstall_cmds=$lt_postinstall_cmds # Command to use after uninstallation of a shared archive. postuninstall_cmds=$lt_postuninstall_cmds # Commands used to finish a libtool library installation in a directory. finish_cmds=$lt_finish_cmds # As "finish_cmds", except a single script fragment to be evaled but # not shown. finish_eval=$lt_finish_eval # Whether we should hardcode library paths into libraries. hardcode_into_libs=$hardcode_into_libs # Compile-time system search path for libraries. sys_lib_search_path_spec=$lt_sys_lib_search_path_spec # Run-time system search path for libraries. sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec # Whether dlopen is supported. dlopen_support=$enable_dlopen # Whether dlopen of programs is supported. dlopen_self=$enable_dlopen_self # Whether dlopen of statically linked programs is supported. dlopen_self_static=$enable_dlopen_self_static # Commands to strip libraries. old_striplib=$lt_old_striplib striplib=$lt_striplib # The linker used to build libraries. LD=$lt_LD # Commands used to build an old-style archive. old_archive_cmds=$lt_old_archive_cmds # A language specific compiler. CC=$lt_compiler # Is the compiler the GNU compiler? with_gcc=$GCC # Compiler flag to turn off builtin functions. no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag # How to pass a linker flag through the compiler. wl=$lt_lt_prog_compiler_wl # Additional compiler flags for building library objects. pic_flag=$lt_lt_prog_compiler_pic # Compiler flag to prevent dynamic linking. link_static_flag=$lt_lt_prog_compiler_static # Does compiler simultaneously support -c and -o options? compiler_c_o=$lt_lt_cv_prog_compiler_c_o # Whether or not to add -lc for building shared libraries. build_libtool_need_lc=$archive_cmds_need_lc # Whether or not to disallow shared libs when runtime libs are static. allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes # Compiler flag to allow reflexive dlopens. export_dynamic_flag_spec=$lt_export_dynamic_flag_spec # Compiler flag to generate shared objects directly from archives. whole_archive_flag_spec=$lt_whole_archive_flag_spec # Whether the compiler copes with passing no objects directly. compiler_needs_object=$lt_compiler_needs_object # Create an old-style archive from a shared archive. old_archive_from_new_cmds=$lt_old_archive_from_new_cmds # Create a temporary old-style archive to link instead of a shared archive. old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds # Commands used to build a shared archive. archive_cmds=$lt_archive_cmds archive_expsym_cmds=$lt_archive_expsym_cmds # Commands used to build a loadable module if different from building # a shared archive. module_cmds=$lt_module_cmds module_expsym_cmds=$lt_module_expsym_cmds # Whether we are building with GNU ld or not. with_gnu_ld=$lt_with_gnu_ld # Flag that allows shared libraries with undefined symbols to be built. allow_undefined_flag=$lt_allow_undefined_flag # Flag that enforces no undefined symbols. no_undefined_flag=$lt_no_undefined_flag # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec # If ld is used when linking, flag to hardcode \$libdir into a binary # during linking. This must work even if \$libdir does not exist. hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld # Whether we need a single "-rpath" flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator # Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes # DIR into the resulting binary. hardcode_direct=$hardcode_direct # Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes # DIR into the resulting binary and the resulting library dependency is # "absolute",i.e impossible to change by setting \${shlibpath_var} if the # library is relocated. hardcode_direct_absolute=$hardcode_direct_absolute # Set to "yes" if using the -LDIR flag during linking hardcodes DIR # into the resulting binary. hardcode_minus_L=$hardcode_minus_L # Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR # into the resulting binary. hardcode_shlibpath_var=$hardcode_shlibpath_var # Set to "yes" if building a shared library automatically hardcodes DIR # into the library and all subsequent libraries and executables linked # against it. hardcode_automatic=$hardcode_automatic # Set to yes if linker adds runtime paths of dependent libraries # to runtime path list. inherit_rpath=$inherit_rpath # Whether libtool must link a program against all its dependency libraries. link_all_deplibs=$link_all_deplibs # Fix the shell variable \$srcfile for the compiler. fix_srcfile_path=$lt_fix_srcfile_path # Set to "yes" if exported symbols are required. always_export_symbols=$always_export_symbols # The commands to list exported symbols. export_symbols_cmds=$lt_export_symbols_cmds # Symbols that should not be listed in the preloaded symbols. exclude_expsyms=$lt_exclude_expsyms # Symbols that must always be exported. include_expsyms=$lt_include_expsyms # Commands necessary for linking programs (against libraries) with templates. prelink_cmds=$lt_prelink_cmds # Specify filename containing input files. file_list_spec=$lt_file_list_spec # How to hardcode a shared library path into an executable. hardcode_action=$hardcode_action # ### END LIBTOOL CONFIG _LT_EOF case $host_os in aix3*) cat <<\_LT_EOF >> "$cfgfile" # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi _LT_EOF ;; esac ltmain="$ac_aux_dir/ltmain.sh" # We use sed instead of cat because bash on DJGPP gets confused if # if finds mixed CR/LF and LF-only lines. Since sed operates in # text mode, it properly converts lines to CR/LF. This bash problem # is reportedly fixed, but why not run on old versions too? sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \ || (rm -f "$cfgfile"; exit 1) case $xsi_shell in yes) cat << \_LT_EOF >> "$cfgfile" # func_dirname file append nondir_replacement # Compute the dirname of FILE. If nonempty, add APPEND to the result, # otherwise set result to NONDIR_REPLACEMENT. func_dirname () { case ${1} in */*) func_dirname_result="${1%/*}${2}" ;; * ) func_dirname_result="${3}" ;; esac } # func_basename file func_basename () { func_basename_result="${1##*/}" } # func_dirname_and_basename file append nondir_replacement # perform func_basename and func_dirname in a single function # call: # dirname: Compute the dirname of FILE. If nonempty, # add APPEND to the result, otherwise set result # to NONDIR_REPLACEMENT. # value returned in "$func_dirname_result" # basename: Compute filename of FILE. # value retuned in "$func_basename_result" # Implementation must be kept synchronized with func_dirname # and func_basename. For efficiency, we do not delegate to # those functions but instead duplicate the functionality here. func_dirname_and_basename () { case ${1} in */*) func_dirname_result="${1%/*}${2}" ;; * ) func_dirname_result="${3}" ;; esac func_basename_result="${1##*/}" } # func_stripname prefix suffix name # strip PREFIX and SUFFIX off of NAME. # PREFIX and SUFFIX must not contain globbing or regex special # characters, hashes, percent signs, but SUFFIX may contain a leading # dot (in which case that matches only a dot). func_stripname () { # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are # positional parameters, so assign one to ordinary parameter first. func_stripname_result=${3} func_stripname_result=${func_stripname_result#"${1}"} func_stripname_result=${func_stripname_result%"${2}"} } # func_opt_split func_opt_split () { func_opt_split_opt=${1%%=*} func_opt_split_arg=${1#*=} } # func_lo2o object func_lo2o () { case ${1} in *.lo) func_lo2o_result=${1%.lo}.${objext} ;; *) func_lo2o_result=${1} ;; esac } # func_xform libobj-or-source func_xform () { func_xform_result=${1%.*}.lo } # func_arith arithmetic-term... func_arith () { func_arith_result=$(( $* )) } # func_len string # STRING may not start with a hyphen. func_len () { func_len_result=${#1} } _LT_EOF ;; *) # Bourne compatible functions. cat << \_LT_EOF >> "$cfgfile" # func_dirname file append nondir_replacement # Compute the dirname of FILE. If nonempty, add APPEND to the result, # otherwise set result to NONDIR_REPLACEMENT. func_dirname () { # Extract subdirectory from the argument. func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` if test "X$func_dirname_result" = "X${1}"; then func_dirname_result="${3}" else func_dirname_result="$func_dirname_result${2}" fi } # func_basename file func_basename () { func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` } # func_stripname prefix suffix name # strip PREFIX and SUFFIX off of NAME. # PREFIX and SUFFIX must not contain globbing or regex special # characters, hashes, percent signs, but SUFFIX may contain a leading # dot (in which case that matches only a dot). # func_strip_suffix prefix name func_stripname () { case ${2} in .*) func_stripname_result=`$ECHO "X${3}" \ | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;; *) func_stripname_result=`$ECHO "X${3}" \ | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;; esac } # sed scripts: my_sed_long_opt='1s/^\(-[^=]*\)=.*/\1/;q' my_sed_long_arg='1s/^-[^=]*=//' # func_opt_split func_opt_split () { func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"` func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"` } # func_lo2o object func_lo2o () { func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"` } # func_xform libobj-or-source func_xform () { func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[^.]*$/.lo/'` } # func_arith arithmetic-term... func_arith () { func_arith_result=`expr "$@"` } # func_len string # STRING may not start with a hyphen. func_len () { func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len` } _LT_EOF esac case $lt_shell_append in yes) cat << \_LT_EOF >> "$cfgfile" # func_append var value # Append VALUE to the end of shell variable VAR. func_append () { eval "$1+=\$2" } _LT_EOF ;; *) cat << \_LT_EOF >> "$cfgfile" # func_append var value # Append VALUE to the end of shell variable VAR. func_append () { eval "$1=\$$1\$2" } _LT_EOF ;; esac sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \ || (rm -f "$cfgfile"; exit 1) mv -f "$cfgfile" "$ofile" || (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") chmod +x "$ofile" ;; "default-1":C) case "$CONFIG_FILES" in *po/Makefile.in*) sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile esac ;; "po/stamp-it":C) if ! grep "^# INTLTOOL_MAKEFILE$" "po/Makefile.in" > /dev/null ; then as_fn_error "po/Makefile.in.in was not created by intltoolize." "$LINENO" 5 fi rm -f "po/stamp-it" "po/stamp-it.tmp" "po/POTFILES" "po/Makefile.tmp" >"po/stamp-it.tmp" sed '/^#/d s/^[[].*] *// /^[ ]*$/d '"s|^| $ac_top_srcdir/|" \ "$srcdir/po/POTFILES.in" | sed '$!s/$/ \\/' >"po/POTFILES" sed '/^POTFILES =/,/[^\\]$/ { /^POTFILES =/!d r po/POTFILES } ' "po/Makefile.in" >"po/Makefile" rm -f "po/Makefile.tmp" mv "po/stamp-it.tmp" "po/stamp-it" ;; esac done # for ac_tag as_fn_exit 0 _ACEOF ac_clean_files=$ac_clean_files_save test $ac_write_fail = 0 || as_fn_error "write failure creating $CONFIG_STATUS" "$LINENO" 5 # configure is writing to config.log, and then calls config.status. # config.status does its own redirection, appending to config.log. # Unfortunately, on DOS this fails, as config.log is still kept open # by configure, so config.status won't be able to write to it; its # output is simply discarded. So we exec the FD to /dev/null, # effectively closing config.log, so it can be properly (re)opened and # appended to by config.status. When coming back to configure, we # need to make the FD available again. if test "$no_create" != yes; then ac_cs_success=: ac_config_status_args= test "$silent" = yes && ac_config_status_args="$ac_config_status_args --quiet" exec 5>/dev/null $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. $ac_cs_success || as_fn_exit $? fi if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} fi netspeed_applet-0.16/Makefile.am0000644000175000017500000000164711402426203013573 00000000000000SUBDIRS = help icons po src serverdir = $(libdir)/bonobo/servers server_DATA = GNOME_NetspeedApplet.server server_in_files = $(server_DATA:=.in) server_in_in_files = $(server_in_files:=.in) @INTLTOOL_SERVER_RULE@ distuninstallcheck_listfiles = find . -type f -print | grep -v scrollkeeper spec = $(PACKAGE).spec EXTRA_DIST = GNOME_NetspeedApplet.server.in.in \ $(spec) \ gnome-doc-utils.make \ intltool-update.in \ intltool-merge.in \ intltool-extract.in all-local: $(spec) $(server_DATA) $(server_in_files): $(server_in_in_files) Makefile sed s,@LIBEXECDIR@,$(libexecdir),g <$< >$@ CLEANFILES = $(server_DATA) DISTCLEANFILES = \ gnome-doc-utils.make \ intltool-extract \ intltool-merge \ intltool-update \ $(server_in_files) DISTCHECK_CONFIGURE_FLAGS = --disable-scrollkeeper netspeed_applet-0.16/config.guess0000755000175000017500000013105411402461242014055 00000000000000#! /bin/sh # Attempt to guess a canonical system name. # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, # 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 # Free Software Foundation, Inc. timestamp='2009-06-10' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA # 02110-1301, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Originally written by Per Bothner . # Please send patches to . Submit a context # diff and a properly formatted ChangeLog entry. # # This script attempts to guess a canonical system name similar to # config.sub. If it succeeds, it prints the system name on stdout, and # exits with 0. Otherwise, it exits with 1. # # The plan is that this can be called by configure scripts if you # don't specify an explicit build system type. me=`echo "$0" | sed -e 's,.*/,,'` usage="\ Usage: $0 [OPTION] Output the configuration name of the system \`$me' is run on. Operation modes: -h, --help print this help, then exit -t, --time-stamp print date of last modification, then exit -v, --version print version number, then exit Report bugs and patches to ." version="\ GNU config.guess ($timestamp) Originally written by Per Bothner. Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." help=" Try \`$me --help' for more information." # Parse command line while test $# -gt 0 ; do case $1 in --time-stamp | --time* | -t ) echo "$timestamp" ; exit ;; --version | -v ) echo "$version" ; exit ;; --help | --h* | -h ) echo "$usage"; exit ;; -- ) # Stop option processing shift; break ;; - ) # Use stdin as input. break ;; -* ) echo "$me: invalid option $1$help" >&2 exit 1 ;; * ) break ;; esac done if test $# != 0; then echo "$me: too many arguments$help" >&2 exit 1 fi trap 'exit 1' 1 2 15 # CC_FOR_BUILD -- compiler used by this script. Note that the use of a # compiler to aid in system detection is discouraged as it requires # temporary files to be created and, as you can see below, it is a # headache to deal with in a portable fashion. # Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still # use `HOST_CC' if defined, but it is deprecated. # Portable tmp directory creation inspired by the Autoconf team. set_cc_for_build=' trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; : ${TMPDIR=/tmp} ; { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; dummy=$tmp/dummy ; tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; case $CC_FOR_BUILD,$HOST_CC,$CC in ,,) echo "int x;" > $dummy.c ; for c in cc gcc c89 c99 ; do if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then CC_FOR_BUILD="$c"; break ; fi ; done ; if test x"$CC_FOR_BUILD" = x ; then CC_FOR_BUILD=no_compiler_found ; fi ;; ,,*) CC_FOR_BUILD=$CC ;; ,*,*) CC_FOR_BUILD=$HOST_CC ;; esac ; set_cc_for_build= ;' # This is needed to find uname on a Pyramid OSx when run in the BSD universe. # (ghazi@noc.rutgers.edu 1994-08-24) if (test -f /.attbin/uname) >/dev/null 2>&1 ; then PATH=$PATH:/.attbin ; export PATH fi UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown # Note: order is significant - the case branches are not exclusive. case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in *:NetBSD:*:*) # NetBSD (nbsd) targets should (where applicable) match one or # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently # switched to ELF, *-*-netbsd* would select the old # object file format. This provides both forward # compatibility and a consistent mechanism for selecting the # object file format. # # Note: NetBSD doesn't particularly care about the vendor # portion of the name. We always set it to "unknown". sysctl="sysctl -n hw.machine_arch" UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ /usr/sbin/$sysctl 2>/dev/null || echo unknown)` case "${UNAME_MACHINE_ARCH}" in armeb) machine=armeb-unknown ;; arm*) machine=arm-unknown ;; sh3el) machine=shl-unknown ;; sh3eb) machine=sh-unknown ;; sh5el) machine=sh5le-unknown ;; *) machine=${UNAME_MACHINE_ARCH}-unknown ;; esac # The Operating System including object format, if it has switched # to ELF recently, or will in the future. case "${UNAME_MACHINE_ARCH}" in arm*|i386|m68k|ns32k|sh3*|sparc|vax) eval $set_cc_for_build if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ | grep -q __ELF__ then # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). # Return netbsd for either. FIX? os=netbsd else os=netbsdelf fi ;; *) os=netbsd ;; esac # The OS release # Debian GNU/NetBSD machines have a different userland, and # thus, need a distinct triplet. However, they do not need # kernel version information, so it can be replaced with a # suitable tag, in the style of linux-gnu. case "${UNAME_VERSION}" in Debian*) release='-gnu' ;; *) release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` ;; esac # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: # contains redundant information, the shorter form: # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. echo "${machine}-${os}${release}" exit ;; *:OpenBSD:*:*) UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} exit ;; *:ekkoBSD:*:*) echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} exit ;; *:SolidBSD:*:*) echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE} exit ;; macppc:MirBSD:*:*) echo powerpc-unknown-mirbsd${UNAME_RELEASE} exit ;; *:MirBSD:*:*) echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} exit ;; alpha:OSF1:*:*) case $UNAME_RELEASE in *4.0) UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` ;; *5.*) UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` ;; esac # According to Compaq, /usr/sbin/psrinfo has been available on # OSF/1 and Tru64 systems produced since 1995. I hope that # covers most systems running today. This code pipes the CPU # types through head -n 1, so we only detect the type of CPU 0. ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` case "$ALPHA_CPU_TYPE" in "EV4 (21064)") UNAME_MACHINE="alpha" ;; "EV4.5 (21064)") UNAME_MACHINE="alpha" ;; "LCA4 (21066/21068)") UNAME_MACHINE="alpha" ;; "EV5 (21164)") UNAME_MACHINE="alphaev5" ;; "EV5.6 (21164A)") UNAME_MACHINE="alphaev56" ;; "EV5.6 (21164PC)") UNAME_MACHINE="alphapca56" ;; "EV5.7 (21164PC)") UNAME_MACHINE="alphapca57" ;; "EV6 (21264)") UNAME_MACHINE="alphaev6" ;; "EV6.7 (21264A)") UNAME_MACHINE="alphaev67" ;; "EV6.8CB (21264C)") UNAME_MACHINE="alphaev68" ;; "EV6.8AL (21264B)") UNAME_MACHINE="alphaev68" ;; "EV6.8CX (21264D)") UNAME_MACHINE="alphaev68" ;; "EV6.9A (21264/EV69A)") UNAME_MACHINE="alphaev69" ;; "EV7 (21364)") UNAME_MACHINE="alphaev7" ;; "EV7.9 (21364A)") UNAME_MACHINE="alphaev79" ;; esac # A Pn.n version is a patched version. # A Vn.n version is a released version. # A Tn.n version is a released field test version. # A Xn.n version is an unreleased experimental baselevel. # 1.2 uses "1.2" for uname -r. echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` exit ;; Alpha\ *:Windows_NT*:*) # How do we know it's Interix rather than the generic POSIX subsystem? # Should we change UNAME_MACHINE based on the output of uname instead # of the specific Alpha model? echo alpha-pc-interix exit ;; 21064:Windows_NT:50:3) echo alpha-dec-winnt3.5 exit ;; Amiga*:UNIX_System_V:4.0:*) echo m68k-unknown-sysv4 exit ;; *:[Aa]miga[Oo][Ss]:*:*) echo ${UNAME_MACHINE}-unknown-amigaos exit ;; *:[Mm]orph[Oo][Ss]:*:*) echo ${UNAME_MACHINE}-unknown-morphos exit ;; *:OS/390:*:*) echo i370-ibm-openedition exit ;; *:z/VM:*:*) echo s390-ibm-zvmoe exit ;; *:OS400:*:*) echo powerpc-ibm-os400 exit ;; arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) echo arm-acorn-riscix${UNAME_RELEASE} exit ;; arm:riscos:*:*|arm:RISCOS:*:*) echo arm-unknown-riscos exit ;; SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) echo hppa1.1-hitachi-hiuxmpp exit ;; Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. if test "`(/bin/universe) 2>/dev/null`" = att ; then echo pyramid-pyramid-sysv3 else echo pyramid-pyramid-bsd fi exit ;; NILE*:*:*:dcosx) echo pyramid-pyramid-svr4 exit ;; DRS?6000:unix:4.0:6*) echo sparc-icl-nx6 exit ;; DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) case `/usr/bin/uname -p` in sparc) echo sparc-icl-nx7; exit ;; esac ;; s390x:SunOS:*:*) echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; sun4H:SunOS:5.*:*) echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) eval $set_cc_for_build SUN_ARCH="i386" # If there is a compiler, see if it is configured for 64-bit objects. # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. # This test works for both compilers. if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ grep IS_64BIT_ARCH >/dev/null then SUN_ARCH="x86_64" fi fi echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; sun4*:SunOS:6*:*) # According to config.sub, this is the proper way to canonicalize # SunOS6. Hard to guess exactly what SunOS6 will be like, but # it's likely to be more like Solaris than SunOS4. echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; sun4*:SunOS:*:*) case "`/usr/bin/arch -k`" in Series*|S4*) UNAME_RELEASE=`uname -v` ;; esac # Japanese Language versions have a version number like `4.1.3-JL'. echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` exit ;; sun3*:SunOS:*:*) echo m68k-sun-sunos${UNAME_RELEASE} exit ;; sun*:*:4.2BSD:*) UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 case "`/bin/arch`" in sun3) echo m68k-sun-sunos${UNAME_RELEASE} ;; sun4) echo sparc-sun-sunos${UNAME_RELEASE} ;; esac exit ;; aushp:SunOS:*:*) echo sparc-auspex-sunos${UNAME_RELEASE} exit ;; # The situation for MiNT is a little confusing. The machine name # can be virtually everything (everything which is not # "atarist" or "atariste" at least should have a processor # > m68000). The system name ranges from "MiNT" over "FreeMiNT" # to the lowercase version "mint" (or "freemint"). Finally # the system name "TOS" denotes a system which is actually not # MiNT. But MiNT is downward compatible to TOS, so this should # be no problem. atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} exit ;; atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} exit ;; *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} exit ;; milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) echo m68k-milan-mint${UNAME_RELEASE} exit ;; hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) echo m68k-hades-mint${UNAME_RELEASE} exit ;; *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) echo m68k-unknown-mint${UNAME_RELEASE} exit ;; m68k:machten:*:*) echo m68k-apple-machten${UNAME_RELEASE} exit ;; powerpc:machten:*:*) echo powerpc-apple-machten${UNAME_RELEASE} exit ;; RISC*:Mach:*:*) echo mips-dec-mach_bsd4.3 exit ;; RISC*:ULTRIX:*:*) echo mips-dec-ultrix${UNAME_RELEASE} exit ;; VAX*:ULTRIX*:*:*) echo vax-dec-ultrix${UNAME_RELEASE} exit ;; 2020:CLIX:*:* | 2430:CLIX:*:*) echo clipper-intergraph-clix${UNAME_RELEASE} exit ;; mips:*:*:UMIPS | mips:*:*:RISCos) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #ifdef __cplusplus #include /* for printf() prototype */ int main (int argc, char *argv[]) { #else int main (argc, argv) int argc; char *argv[]; { #endif #if defined (host_mips) && defined (MIPSEB) #if defined (SYSTYPE_SYSV) printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); #endif #if defined (SYSTYPE_SVR4) printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); #endif #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); #endif #endif exit (-1); } EOF $CC_FOR_BUILD -o $dummy $dummy.c && dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && SYSTEM_NAME=`$dummy $dummyarg` && { echo "$SYSTEM_NAME"; exit; } echo mips-mips-riscos${UNAME_RELEASE} exit ;; Motorola:PowerMAX_OS:*:*) echo powerpc-motorola-powermax exit ;; Motorola:*:4.3:PL8-*) echo powerpc-harris-powermax exit ;; Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) echo powerpc-harris-powermax exit ;; Night_Hawk:Power_UNIX:*:*) echo powerpc-harris-powerunix exit ;; m88k:CX/UX:7*:*) echo m88k-harris-cxux7 exit ;; m88k:*:4*:R4*) echo m88k-motorola-sysv4 exit ;; m88k:*:3*:R3*) echo m88k-motorola-sysv3 exit ;; AViiON:dgux:*:*) # DG/UX returns AViiON for all architectures UNAME_PROCESSOR=`/usr/bin/uname -p` if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] then if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ [ ${TARGET_BINARY_INTERFACE}x = x ] then echo m88k-dg-dgux${UNAME_RELEASE} else echo m88k-dg-dguxbcs${UNAME_RELEASE} fi else echo i586-dg-dgux${UNAME_RELEASE} fi exit ;; M88*:DolphinOS:*:*) # DolphinOS (SVR3) echo m88k-dolphin-sysv3 exit ;; M88*:*:R3*:*) # Delta 88k system running SVR3 echo m88k-motorola-sysv3 exit ;; XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) echo m88k-tektronix-sysv3 exit ;; Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) echo m68k-tektronix-bsd exit ;; *:IRIX*:*:*) echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` exit ;; ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' i*86:AIX:*:*) echo i386-ibm-aix exit ;; ia64:AIX:*:*) if [ -x /usr/bin/oslevel ] ; then IBM_REV=`/usr/bin/oslevel` else IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} fi echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} exit ;; *:AIX:2:3) if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #include main() { if (!__power_pc()) exit(1); puts("powerpc-ibm-aix3.2.5"); exit(0); } EOF if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` then echo "$SYSTEM_NAME" else echo rs6000-ibm-aix3.2.5 fi elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then echo rs6000-ibm-aix3.2.4 else echo rs6000-ibm-aix3.2 fi exit ;; *:AIX:*:[456]) IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then IBM_ARCH=rs6000 else IBM_ARCH=powerpc fi if [ -x /usr/bin/oslevel ] ; then IBM_REV=`/usr/bin/oslevel` else IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} fi echo ${IBM_ARCH}-ibm-aix${IBM_REV} exit ;; *:AIX:*:*) echo rs6000-ibm-aix exit ;; ibmrt:4.4BSD:*|romp-ibm:BSD:*) echo romp-ibm-bsd4.4 exit ;; ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to exit ;; # report: romp-ibm BSD 4.3 *:BOSX:*:*) echo rs6000-bull-bosx exit ;; DPX/2?00:B.O.S.:*:*) echo m68k-bull-sysv3 exit ;; 9000/[34]??:4.3bsd:1.*:*) echo m68k-hp-bsd exit ;; hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) echo m68k-hp-bsd4.4 exit ;; 9000/[34678]??:HP-UX:*:*) HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` case "${UNAME_MACHINE}" in 9000/31? ) HP_ARCH=m68000 ;; 9000/[34]?? ) HP_ARCH=m68k ;; 9000/[678][0-9][0-9]) if [ -x /usr/bin/getconf ]; then sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` case "${sc_cpu_version}" in 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 532) # CPU_PA_RISC2_0 case "${sc_kernel_bits}" in 32) HP_ARCH="hppa2.0n" ;; 64) HP_ARCH="hppa2.0w" ;; '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 esac ;; esac fi if [ "${HP_ARCH}" = "" ]; then eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #define _HPUX_SOURCE #include #include int main () { #if defined(_SC_KERNEL_BITS) long bits = sysconf(_SC_KERNEL_BITS); #endif long cpu = sysconf (_SC_CPU_VERSION); switch (cpu) { case CPU_PA_RISC1_0: puts ("hppa1.0"); break; case CPU_PA_RISC1_1: puts ("hppa1.1"); break; case CPU_PA_RISC2_0: #if defined(_SC_KERNEL_BITS) switch (bits) { case 64: puts ("hppa2.0w"); break; case 32: puts ("hppa2.0n"); break; default: puts ("hppa2.0"); break; } break; #else /* !defined(_SC_KERNEL_BITS) */ puts ("hppa2.0"); break; #endif default: puts ("hppa1.0"); break; } exit (0); } EOF (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` test -z "$HP_ARCH" && HP_ARCH=hppa fi ;; esac if [ ${HP_ARCH} = "hppa2.0w" ] then eval $set_cc_for_build # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler # generating 64-bit code. GNU and HP use different nomenclature: # # $ CC_FOR_BUILD=cc ./config.guess # => hppa2.0w-hp-hpux11.23 # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess # => hppa64-hp-hpux11.23 if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | grep -q __LP64__ then HP_ARCH="hppa2.0w" else HP_ARCH="hppa64" fi fi echo ${HP_ARCH}-hp-hpux${HPUX_REV} exit ;; ia64:HP-UX:*:*) HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` echo ia64-hp-hpux${HPUX_REV} exit ;; 3050*:HI-UX:*:*) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #include int main () { long cpu = sysconf (_SC_CPU_VERSION); /* The order matters, because CPU_IS_HP_MC68K erroneously returns true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct results, however. */ if (CPU_IS_PA_RISC (cpu)) { switch (cpu) { case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; default: puts ("hppa-hitachi-hiuxwe2"); break; } } else if (CPU_IS_HP_MC68K (cpu)) puts ("m68k-hitachi-hiuxwe2"); else puts ("unknown-hitachi-hiuxwe2"); exit (0); } EOF $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && { echo "$SYSTEM_NAME"; exit; } echo unknown-hitachi-hiuxwe2 exit ;; 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) echo hppa1.1-hp-bsd exit ;; 9000/8??:4.3bsd:*:*) echo hppa1.0-hp-bsd exit ;; *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) echo hppa1.0-hp-mpeix exit ;; hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) echo hppa1.1-hp-osf exit ;; hp8??:OSF1:*:*) echo hppa1.0-hp-osf exit ;; i*86:OSF1:*:*) if [ -x /usr/sbin/sysversion ] ; then echo ${UNAME_MACHINE}-unknown-osf1mk else echo ${UNAME_MACHINE}-unknown-osf1 fi exit ;; parisc*:Lites*:*:*) echo hppa1.1-hp-lites exit ;; C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) echo c1-convex-bsd exit ;; C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) if getsysinfo -f scalar_acc then echo c32-convex-bsd else echo c2-convex-bsd fi exit ;; C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) echo c34-convex-bsd exit ;; C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) echo c38-convex-bsd exit ;; C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) echo c4-convex-bsd exit ;; CRAY*Y-MP:*:*:*) echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; CRAY*[A-Z]90:*:*:*) echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ -e 's/\.[^.]*$/.X/' exit ;; CRAY*TS:*:*:*) echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; CRAY*T3E:*:*:*) echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; CRAY*SV1:*:*:*) echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; *:UNICOS/mp:*:*) echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" exit ;; 5000:UNIX_System_V:4.*:*) FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" exit ;; i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} exit ;; sparc*:BSD/OS:*:*) echo sparc-unknown-bsdi${UNAME_RELEASE} exit ;; *:BSD/OS:*:*) echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} exit ;; *:FreeBSD:*:*) case ${UNAME_MACHINE} in pc98) echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; amd64) echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; *) echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; esac exit ;; i*:CYGWIN*:*) echo ${UNAME_MACHINE}-pc-cygwin exit ;; *:MINGW*:*) echo ${UNAME_MACHINE}-pc-mingw32 exit ;; i*:windows32*:*) # uname -m includes "-pc" on this system. echo ${UNAME_MACHINE}-mingw32 exit ;; i*:PW*:*) echo ${UNAME_MACHINE}-pc-pw32 exit ;; *:Interix*:[3456]*) case ${UNAME_MACHINE} in x86) echo i586-pc-interix${UNAME_RELEASE} exit ;; EM64T | authenticamd | genuineintel) echo x86_64-unknown-interix${UNAME_RELEASE} exit ;; IA64) echo ia64-unknown-interix${UNAME_RELEASE} exit ;; esac ;; [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) echo i${UNAME_MACHINE}-pc-mks exit ;; 8664:Windows_NT:*) echo x86_64-pc-mks exit ;; i*:Windows_NT*:* | Pentium*:Windows_NT*:*) # How do we know it's Interix rather than the generic POSIX subsystem? # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we # UNAME_MACHINE based on the output of uname instead of i386? echo i586-pc-interix exit ;; i*:UWIN*:*) echo ${UNAME_MACHINE}-pc-uwin exit ;; amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) echo x86_64-unknown-cygwin exit ;; p*:CYGWIN*:*) echo powerpcle-unknown-cygwin exit ;; prep*:SunOS:5.*:*) echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; *:GNU:*:*) # the GNU system echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` exit ;; *:GNU/*:*:*) # other systems with GNU libc and userland echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu exit ;; i*86:Minix:*:*) echo ${UNAME_MACHINE}-pc-minix exit ;; arm*:Linux:*:*) eval $set_cc_for_build if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ | grep -q __ARM_EABI__ then echo ${UNAME_MACHINE}-unknown-linux-gnu else echo ${UNAME_MACHINE}-unknown-linux-gnueabi fi exit ;; avr32*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; cris:Linux:*:*) echo cris-axis-linux-gnu exit ;; crisv32:Linux:*:*) echo crisv32-axis-linux-gnu exit ;; frv:Linux:*:*) echo frv-unknown-linux-gnu exit ;; ia64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; m32r*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; m68*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; mips:Linux:*:* | mips64:Linux:*:*) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #undef CPU #undef ${UNAME_MACHINE} #undef ${UNAME_MACHINE}el #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) CPU=${UNAME_MACHINE}el #else #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) CPU=${UNAME_MACHINE} #else CPU= #endif #endif EOF eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' /^CPU/{ s: ::g p }'`" test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } ;; or32:Linux:*:*) echo or32-unknown-linux-gnu exit ;; ppc:Linux:*:*) echo powerpc-unknown-linux-gnu exit ;; ppc64:Linux:*:*) echo powerpc64-unknown-linux-gnu exit ;; alpha:Linux:*:*) case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in EV5) UNAME_MACHINE=alphaev5 ;; EV56) UNAME_MACHINE=alphaev56 ;; PCA56) UNAME_MACHINE=alphapca56 ;; PCA57) UNAME_MACHINE=alphapca56 ;; EV6) UNAME_MACHINE=alphaev6 ;; EV67) UNAME_MACHINE=alphaev67 ;; EV68*) UNAME_MACHINE=alphaev68 ;; esac objdump --private-headers /bin/sh | grep -q ld.so.1 if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} exit ;; padre:Linux:*:*) echo sparc-unknown-linux-gnu exit ;; parisc:Linux:*:* | hppa:Linux:*:*) # Look for CPU level case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in PA7*) echo hppa1.1-unknown-linux-gnu ;; PA8*) echo hppa2.0-unknown-linux-gnu ;; *) echo hppa-unknown-linux-gnu ;; esac exit ;; parisc64:Linux:*:* | hppa64:Linux:*:*) echo hppa64-unknown-linux-gnu exit ;; s390:Linux:*:* | s390x:Linux:*:*) echo ${UNAME_MACHINE}-ibm-linux exit ;; sh64*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; sh*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; sparc:Linux:*:* | sparc64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; vax:Linux:*:*) echo ${UNAME_MACHINE}-dec-linux-gnu exit ;; x86_64:Linux:*:*) echo x86_64-unknown-linux-gnu exit ;; xtensa*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; i*86:Linux:*:*) # The BFD linker knows what the default object file format is, so # first see if it will tell us. cd to the root directory to prevent # problems with other programs or directories called `ld' in the path. # Set LC_ALL=C to ensure ld outputs messages in English. ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \ | sed -ne '/supported targets:/!d s/[ ][ ]*/ /g s/.*supported targets: *// s/ .*// p'` case "$ld_supported_targets" in elf32-i386) TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu" ;; esac # Determine whether the default compiler is a.out or elf eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #include #ifdef __ELF__ # ifdef __GLIBC__ # if __GLIBC__ >= 2 LIBC=gnu # else LIBC=gnulibc1 # endif # else LIBC=gnulibc1 # endif #else #if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__SUNPRO_C) || defined(__SUNPRO_CC) LIBC=gnu #else LIBC=gnuaout #endif #endif #ifdef __dietlibc__ LIBC=dietlibc #endif EOF eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' /^LIBC/{ s: ::g p }'`" test x"${LIBC}" != x && { echo "${UNAME_MACHINE}-pc-linux-${LIBC}" exit } test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; } ;; i*86:DYNIX/ptx:4*:*) # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. # earlier versions are messed up and put the nodename in both # sysname and nodename. echo i386-sequent-sysv4 exit ;; i*86:UNIX_SV:4.2MP:2.*) # Unixware is an offshoot of SVR4, but it has its own version # number series starting with 2... # I am not positive that other SVR4 systems won't match this, # I just have to hope. -- rms. # Use sysv4.2uw... so that sysv4* matches it. echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} exit ;; i*86:OS/2:*:*) # If we were able to find `uname', then EMX Unix compatibility # is probably installed. echo ${UNAME_MACHINE}-pc-os2-emx exit ;; i*86:XTS-300:*:STOP) echo ${UNAME_MACHINE}-unknown-stop exit ;; i*86:atheos:*:*) echo ${UNAME_MACHINE}-unknown-atheos exit ;; i*86:syllable:*:*) echo ${UNAME_MACHINE}-pc-syllable exit ;; i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*) echo i386-unknown-lynxos${UNAME_RELEASE} exit ;; i*86:*DOS:*:*) echo ${UNAME_MACHINE}-pc-msdosdjgpp exit ;; i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} else echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} fi exit ;; i*86:*:5:[678]*) # UnixWare 7.x, OpenUNIX and OpenServer 6. case `/bin/uname -X | grep "^Machine"` in *486*) UNAME_MACHINE=i486 ;; *Pentium) UNAME_MACHINE=i586 ;; *Pent*|*Celeron) UNAME_MACHINE=i686 ;; esac echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} exit ;; i*86:*:3.2:*) if test -f /usr/options/cb.name; then UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ && UNAME_MACHINE=i586 (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ && UNAME_MACHINE=i686 (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ && UNAME_MACHINE=i686 echo ${UNAME_MACHINE}-pc-sco$UNAME_REL else echo ${UNAME_MACHINE}-pc-sysv32 fi exit ;; pc:*:*:*) # Left here for compatibility: # uname -m prints for DJGPP always 'pc', but it prints nothing about # the processor, so we play safe by assuming i586. # Note: whatever this is, it MUST be the same as what config.sub # prints for the "djgpp" host, or else GDB configury will decide that # this is a cross-build. echo i586-pc-msdosdjgpp exit ;; Intel:Mach:3*:*) echo i386-pc-mach3 exit ;; paragon:*:*:*) echo i860-intel-osf1 exit ;; i860:*:4.*:*) # i860-SVR4 if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 else # Add other i860-SVR4 vendors below as they are discovered. echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 fi exit ;; mini*:CTIX:SYS*5:*) # "miniframe" echo m68010-convergent-sysv exit ;; mc68k:UNIX:SYSTEM5:3.51m) echo m68k-convergent-sysv exit ;; M680?0:D-NIX:5.3:*) echo m68k-diab-dnix exit ;; M68*:*:R3V[5678]*:*) test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) OS_REL='' test -r /etc/.relid \ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && { echo i486-ncr-sysv4.3${OS_REL}; exit; } /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && { echo i486-ncr-sysv4; exit; } ;; NCR*:*:4.2:* | MPRAS*:*:4.2:*) OS_REL='.3' test -r /etc/.relid \ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && { echo i486-ncr-sysv4.3${OS_REL}; exit; } /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) echo m68k-unknown-lynxos${UNAME_RELEASE} exit ;; mc68030:UNIX_System_V:4.*:*) echo m68k-atari-sysv4 exit ;; TSUNAMI:LynxOS:2.*:*) echo sparc-unknown-lynxos${UNAME_RELEASE} exit ;; rs6000:LynxOS:2.*:*) echo rs6000-unknown-lynxos${UNAME_RELEASE} exit ;; PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*) echo powerpc-unknown-lynxos${UNAME_RELEASE} exit ;; SM[BE]S:UNIX_SV:*:*) echo mips-dde-sysv${UNAME_RELEASE} exit ;; RM*:ReliantUNIX-*:*:*) echo mips-sni-sysv4 exit ;; RM*:SINIX-*:*:*) echo mips-sni-sysv4 exit ;; *:SINIX-*:*:*) if uname -p 2>/dev/null >/dev/null ; then UNAME_MACHINE=`(uname -p) 2>/dev/null` echo ${UNAME_MACHINE}-sni-sysv4 else echo ns32k-sni-sysv fi exit ;; PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort # says echo i586-unisys-sysv4 exit ;; *:UNIX_System_V:4*:FTX*) # From Gerald Hewes . # How about differentiating between stratus architectures? -djm echo hppa1.1-stratus-sysv4 exit ;; *:*:*:FTX*) # From seanf@swdc.stratus.com. echo i860-stratus-sysv4 exit ;; i*86:VOS:*:*) # From Paul.Green@stratus.com. echo ${UNAME_MACHINE}-stratus-vos exit ;; *:VOS:*:*) # From Paul.Green@stratus.com. echo hppa1.1-stratus-vos exit ;; mc68*:A/UX:*:*) echo m68k-apple-aux${UNAME_RELEASE} exit ;; news*:NEWS-OS:6*:*) echo mips-sony-newsos6 exit ;; R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) if [ -d /usr/nec ]; then echo mips-nec-sysv${UNAME_RELEASE} else echo mips-unknown-sysv${UNAME_RELEASE} fi exit ;; BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. echo powerpc-be-beos exit ;; BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. echo powerpc-apple-beos exit ;; BePC:BeOS:*:*) # BeOS running on Intel PC compatible. echo i586-pc-beos exit ;; BePC:Haiku:*:*) # Haiku running on Intel PC compatible. echo i586-pc-haiku exit ;; SX-4:SUPER-UX:*:*) echo sx4-nec-superux${UNAME_RELEASE} exit ;; SX-5:SUPER-UX:*:*) echo sx5-nec-superux${UNAME_RELEASE} exit ;; SX-6:SUPER-UX:*:*) echo sx6-nec-superux${UNAME_RELEASE} exit ;; SX-7:SUPER-UX:*:*) echo sx7-nec-superux${UNAME_RELEASE} exit ;; SX-8:SUPER-UX:*:*) echo sx8-nec-superux${UNAME_RELEASE} exit ;; SX-8R:SUPER-UX:*:*) echo sx8r-nec-superux${UNAME_RELEASE} exit ;; Power*:Rhapsody:*:*) echo powerpc-apple-rhapsody${UNAME_RELEASE} exit ;; *:Rhapsody:*:*) echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} exit ;; *:Darwin:*:*) UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown case $UNAME_PROCESSOR in unknown) UNAME_PROCESSOR=powerpc ;; esac echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} exit ;; *:procnto*:*:* | *:QNX:[0123456789]*:*) UNAME_PROCESSOR=`uname -p` if test "$UNAME_PROCESSOR" = "x86"; then UNAME_PROCESSOR=i386 UNAME_MACHINE=pc fi echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} exit ;; *:QNX:*:4*) echo i386-pc-qnx exit ;; NSE-?:NONSTOP_KERNEL:*:*) echo nse-tandem-nsk${UNAME_RELEASE} exit ;; NSR-?:NONSTOP_KERNEL:*:*) echo nsr-tandem-nsk${UNAME_RELEASE} exit ;; *:NonStop-UX:*:*) echo mips-compaq-nonstopux exit ;; BS2000:POSIX*:*:*) echo bs2000-siemens-sysv exit ;; DS/*:UNIX_System_V:*:*) echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} exit ;; *:Plan9:*:*) # "uname -m" is not consistent, so use $cputype instead. 386 # is converted to i386 for consistency with other x86 # operating systems. if test "$cputype" = "386"; then UNAME_MACHINE=i386 else UNAME_MACHINE="$cputype" fi echo ${UNAME_MACHINE}-unknown-plan9 exit ;; *:TOPS-10:*:*) echo pdp10-unknown-tops10 exit ;; *:TENEX:*:*) echo pdp10-unknown-tenex exit ;; KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) echo pdp10-dec-tops20 exit ;; XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) echo pdp10-xkl-tops20 exit ;; *:TOPS-20:*:*) echo pdp10-unknown-tops20 exit ;; *:ITS:*:*) echo pdp10-unknown-its exit ;; SEI:*:*:SEIUX) echo mips-sei-seiux${UNAME_RELEASE} exit ;; *:DragonFly:*:*) echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` exit ;; *:*VMS:*:*) UNAME_MACHINE=`(uname -p) 2>/dev/null` case "${UNAME_MACHINE}" in A*) echo alpha-dec-vms ; exit ;; I*) echo ia64-dec-vms ; exit ;; V*) echo vax-dec-vms ; exit ;; esac ;; *:XENIX:*:SysV) echo i386-pc-xenix exit ;; i*86:skyos:*:*) echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' exit ;; i*86:rdos:*:*) echo ${UNAME_MACHINE}-pc-rdos exit ;; i*86:AROS:*:*) echo ${UNAME_MACHINE}-pc-aros exit ;; esac #echo '(No uname command or uname output not recognized.)' 1>&2 #echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 eval $set_cc_for_build cat >$dummy.c < # include #endif main () { #if defined (sony) #if defined (MIPSEB) /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, I don't know.... */ printf ("mips-sony-bsd\n"); exit (0); #else #include printf ("m68k-sony-newsos%s\n", #ifdef NEWSOS4 "4" #else "" #endif ); exit (0); #endif #endif #if defined (__arm) && defined (__acorn) && defined (__unix) printf ("arm-acorn-riscix\n"); exit (0); #endif #if defined (hp300) && !defined (hpux) printf ("m68k-hp-bsd\n"); exit (0); #endif #if defined (NeXT) #if !defined (__ARCHITECTURE__) #define __ARCHITECTURE__ "m68k" #endif int version; version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; if (version < 4) printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); else printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); exit (0); #endif #if defined (MULTIMAX) || defined (n16) #if defined (UMAXV) printf ("ns32k-encore-sysv\n"); exit (0); #else #if defined (CMU) printf ("ns32k-encore-mach\n"); exit (0); #else printf ("ns32k-encore-bsd\n"); exit (0); #endif #endif #endif #if defined (__386BSD__) printf ("i386-pc-bsd\n"); exit (0); #endif #if defined (sequent) #if defined (i386) printf ("i386-sequent-dynix\n"); exit (0); #endif #if defined (ns32000) printf ("ns32k-sequent-dynix\n"); exit (0); #endif #endif #if defined (_SEQUENT_) struct utsname un; uname(&un); if (strncmp(un.version, "V2", 2) == 0) { printf ("i386-sequent-ptx2\n"); exit (0); } if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ printf ("i386-sequent-ptx1\n"); exit (0); } printf ("i386-sequent-ptx\n"); exit (0); #endif #if defined (vax) # if !defined (ultrix) # include # if defined (BSD) # if BSD == 43 printf ("vax-dec-bsd4.3\n"); exit (0); # else # if BSD == 199006 printf ("vax-dec-bsd4.3reno\n"); exit (0); # else printf ("vax-dec-bsd\n"); exit (0); # endif # endif # else printf ("vax-dec-bsd\n"); exit (0); # endif # else printf ("vax-dec-ultrix\n"); exit (0); # endif #endif #if defined (alliant) && defined (i860) printf ("i860-alliant-bsd\n"); exit (0); #endif exit (1); } EOF $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` && { echo "$SYSTEM_NAME"; exit; } # Apollos put the system type in the environment. test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; } # Convex versions that predate uname can use getsysinfo(1) if [ -x /usr/convex/getsysinfo ] then case `getsysinfo -f cpu_type` in c1*) echo c1-convex-bsd exit ;; c2*) if getsysinfo -f scalar_acc then echo c32-convex-bsd else echo c2-convex-bsd fi exit ;; c34*) echo c34-convex-bsd exit ;; c38*) echo c38-convex-bsd exit ;; c4*) echo c4-convex-bsd exit ;; esac fi cat >&2 < in order to provide the needed information to handle your system. config.guess timestamp = $timestamp uname -m = `(uname -m) 2>/dev/null || echo unknown` uname -r = `(uname -r) 2>/dev/null || echo unknown` uname -s = `(uname -s) 2>/dev/null || echo unknown` uname -v = `(uname -v) 2>/dev/null || echo unknown` /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` /bin/uname -X = `(/bin/uname -X) 2>/dev/null` hostinfo = `(hostinfo) 2>/dev/null` /bin/universe = `(/bin/universe) 2>/dev/null` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` /bin/arch = `(/bin/arch) 2>/dev/null` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` UNAME_MACHINE = ${UNAME_MACHINE} UNAME_RELEASE = ${UNAME_RELEASE} UNAME_SYSTEM = ${UNAME_SYSTEM} UNAME_VERSION = ${UNAME_VERSION} EOF exit 1 # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "timestamp='" # time-stamp-format: "%:y-%02m-%02d" # time-stamp-end: "'" # End: netspeed_applet-0.16/help/0000755000175000017500000000000011402462051012540 500000000000000netspeed_applet-0.16/help/fr/0000755000175000017500000000000011402462050013146 500000000000000netspeed_applet-0.16/help/fr/figures/0000755000175000017500000000000011402462051014613 500000000000000netspeed_applet-0.16/help/fr/figures/settings.png0000644000175000017500000007361711402462051017117 00000000000000PNG  IHDRrفsBIT|dtEXtCREATORgnome-panel-screenshot7w IDATxw|Se_N ]@v *Ȓ(((.p*AEϣ"**-Pvmns?JӦM\_>C>:9!B!B!B!tek!S5oAKO6!ؽw (E/:9)WuLѧ = F !9]11׾M^4?BVu9S3ISGBR31ptS}vk_oH^4Bhg3>%LB!*Rjz&i\\9p$_Үu 0HӶ%i}V !7Ռ,R~B!G?s93Wr/u6]w s-9?*jHS1IϒkZy|?gpe- ݽ6[m i),T9 UPl:GZvE/K_8XlBq޴\fCa/Z|;N6U齿w&rT8ebd^ͻ # s74v{6p5Ξ峉Pہ/䟤B;݁v罙u /oOѧhV@gs'vTi*uj4O_ ykhn.]YF dHzOdˤygwb~>OdI ^V/=~@~Xz7;pf/'bE%žT֊BU; &ܝ')_?k^C\J&ۤۯ ;QHC#ۨW8nH:H2L*z ɧ͵T(gI9C*ԫ[h#\sC/]!WQquK#{2;;tCdR:Nwh{2'\&go// mNm**iY4oŠ;ҴZ _7q"ZõICk#EqτdcMKG\ EQ0fest`Rt }-q2xvN6YE2ɉGc6fSpO[ώ1oZC:rD?_&_۸8-|YOEtgdCvDmj95Q{l ]=ȇM8vfM{ q 6Weק=w'֤EYqgF]p\jMuZxvwjDs=ed% UUo/p;rC0|je'KWGrZv/ys}?9+N5o9yNh m*P4/&w2is,,'[C;-ۼkVɁ#_xhIOlƳm>Mȼw0]+1'9 Oo$p31-.YTUŅT.];N.&?9^|L > or]ܿ0 aT;q NϩXl|[Xz66yuPŐm,ܟ cK1i=?>F:ؼͤE̿/ˇ3u>7F(?^>Nnm֓ 2ۅU0'5+dşE̿/2ng/CC\VŲyLw;/n3V_P۹th;^4^|e%:1v>SENӸʾj+fX3ߤykiX4Yzi?GQd:ş-ZИl\[w̻()@<N Z >dZSQgʅ㧹gHޣ?KFyfx]4lӇ87>IQݝg߫1ɉVEۼ%֛ǸT8Mى3!ͼjk0p}ΦABۼ'0KS=FŁ# dwƍ{JBo;0]I `TtV^݋-Ҏe3Lvn 6&5 i]%6#96hͣe\+{T8hfZL%))N+i0k{e;x"zՄ˛n^֮-R]tz^tsES;'# U5aȺDaMrڜr`$#Ưկ(/ȫ6\y +\h"^Jϛpz^`0 t J~yOojО?7zbP{]+aJ?N E sskW+R 1t^7H+XBVV6^~z`4=nt:MyiVmcKxשEpmG1AAVj(93кjN97_GvUs׺wAS˼^+i)*\IKN^qpKv1jT;Ϲ]G6oDLș+mP^c^޸{zaNU˫x>;kּBy˽|"V:Jz>6^$3tNu@U!>my4쟪6kgn08\(ӳEd16OϪ)&&z9ړ qxa<1px=8Os:R 6˓jME_o/谞/~~ٱAޅS] ɄH[b^!j1{޼z0n8ң:oQBe? {NRbI>A;%Md ^K6q"oaLEն:.ޡlV!r"W1tW9ԯet: mYl+}K]M]˽DU†ϕsr"C hd=HQbwN=i ԲTUVm'~OGZpfO??}Vc5{NЮ6vKv5SN<6}xxm{m'My쟪GʻEsn*v1?3=6=G2$ߖ=˜/5%܄sIztNKZNv7zSȍ?ΔzFjK%kYĝG$ͨ[z2 d]Qu:~PB^ 7:% ^4!bW5%ՄxrOIi$5b^[}O8]:Pq SSS*:uj* _Ңv-9oKFF}?{v(d^2 d JBQVE,[m$(2`EnФ8 ~#TYӳBQd?#0L6SV긹j4QvX S; Bʫyw]^ͻ~FhM-gBդ>c06iOL!˳Yd#J#+;H5Hϰ0?L4BTW3*wc5hK߿ !UY/dvkWp%|6I!z.a?BQ@BM!B# B!F4B$h !IB!4)Bh$AS!HBM!B# B!F4B$h !IB!4)Bh$ASǿ~-nJyXOUr*sxZѥ3/hBY_spM(4o]{ +ϮHcRܹJh]`,Wd. rrA3_~@62~:x&R?QM(An =ye7B3N9BQӳMk9|. KHA q17{ѥq J=og1Y1U3.x]OX<ݶW/*c>C͛9Cb.h۫p߼ qW2`v4q`g#߶;ǗgH&Hx3l^]TƃkBx3*S9Yf~?/ߗ43KK#k !rMӋ$R۱xcx7~boeh.-ƒ#'76&fż(:̯wr'?Mϗ=ϓw|lR9hw3=w}Cg੏e zx/f0~D=^6ץc/9_bb(C_,>ȁ,<|,=~)2J^E/gF}_KVł 6J!Bg=鏍}gjğ\:EcX=s2}~G<φ:Q4peE"УVuښy&Ǩ(}ǎUm^k;n؅d~/፼H0<,VA>sjh{{th )6lg5cPM~F`l"KolEh_i \ӕilʺxؘ,wOK%%]8eKy5C, ڔQ, ].8׍cY69=|:e u&5XYEw7ȳ6.G0!^uPi֢IZm'//+XE2'OR9v>F W,_i Wؖ,3[{yƧC⺹7dJdxC} F)SϿ)qz<&\pf?֞&ૄ,9ocϱf$h<5 ܱ֧etzPPs$Ju(5V-XKоkzw_5BTiW0ί8z2=Mx5Ms2Wy\|Lث!XH>*wg]X8.661U&c̎uO^T>iQr,3πVTXŐ##q/QP %-7 !ʪWn=4;IoNъמ7Πw[hƃx9jsSKqB`!vw4GO<@!IHޯR71fN]W?qiPdΥSEMI, OBybyVs{ܘ*~M鏔/BuHTӑz ȟUvs)͍@UHST%Fy3T%t:F=je7M!v#1NOw}Hf|ţbnBT{4k7omooTvSƑӳB!F4B$h !IB!4)Bh$AS!Hr"D ehEQFz=8`G5Pvf:WSw!*Nv77hD=O]j%h QrsH h8ȅE=^ Cn _5ѐCܥsl df QaC$6()(;EQLO˧шZ?.DUS˗'EwJRU^h=ѹ@r2*L^$h Qɝ*m BPJUHEnKRJ9}%DI*r}kD ;+ BqSH&Usjq}NYK +Z)#u\ oVvSlg @Gft"ߺGq}2Ux;+~ g}'&3wӨEGTU{?@`O3QY_/;ʼnC{˱TM(2G2Lxq5>Wo3/Q"Fx5]9Y6f4Su*P}bs, ّ=FQx4lffQY[/;EHz1WW7RV8+l+WG60_Iei#'|2yXl8r ɏʄޮ͛żlfᓌ3TnL')VLÙrϳk8ꥹ?&/$xoD_^[޺ǙS=^e3bIo@c:t ͸s§O˓~5- dgcRnݺ$|c;)<z܁ JG=եc~mVAӐy/^}XD:9Ɂ^ƚo4]կO$#ᮎ7YoY0NnNu^qdy_7s]Y?٭(o@؍Ś!cNrOx^z;|YUׇ✕L?S:n4*rqd2hR5aIUO15Sp.$_}}9>Yw(k}l: b-|Bvsғc,X?6>â6A%&FCE%ŝlKa~ߟ7 )ߒ:9zEo\9ƿK$vzGUK.[:JKƤ8eə,zG'c-&c:'t:<&W˿BEдu4JOViO> =[`~E?bwpB1dwr"n2—_fL:2v3I]Fm(=b >_%3**!#ŐKz]v"=ڞ*d&-Z(ӼMg5L]`]ϗ z)ޟ6mJ6YX1kXziEzPxwvzՔFn>>yvX撝5ciZ~|>W~DqܖS<%i{X}5r#=o_PQM)?'ލZ* I hBLvPSPI;A-QM#S͟Yiܔ~##-PIKM=;i'g8>hz"4b ѬTe t8߸<[3ܰߚ=-NtA&̘#豪X#Vc|[ҤDب~G`gk5g_Ѹ&|Ә([Ys[XOpB:şJWQ:*'>w㗿޾#ܬ I'ͳ[!ӳ'͚7p-]o2V7 Ixʾ]oߝ 1h*Fv4ѹ,Z͕z/LR$>nwFLŘc-7QrA|u\qpλoI'#+_T='CPb97m#0CNK;ad\M.W.a@ym(w]i;&E[kuٹ}庥gd@fEc7:rUTE!y89:=¬lU:hU10W6jH{94/7]i !,UUQմ 6-o֔>M!DRUBwRBWEnK(b)*_HV$\<]eLtI B0zW7w/Z#$232^qJqtr?ؘc;!PQHK#Y1~I5 u=i֚O.(F`2\(qk_ -cH?oQ!-wl,؁y_;rӏovS8'BF*/'qo&7 b|x3$fS<ｩj-wiLjՌF ش1k-0Q0o!Ͷ2&eBBaĞ(dyWxy6T[XSD;⷟U+,:tbI]m<۫dJPhJGCk6uT 09pcI}S&N}(85w4ź3z 3X2gζ(s,:|sD0WHjJzGPG޺ǙS=^e3?MkiGab^@6GEIFVFjˋq|,XNs[3f{/Ly-}!genK1ig.MvDɜs_GE)*W2935͛/y'\>[j}Gݱa;dϑ KNtzݵ8XZOϖg[Ԣ<_`[Yx$Dlps}4f_7%4ѹ,Z͕Vo,o@s ߨ:nPh ־ KN@oΧdsO8rfC|]gk]~G܅3,_w?^32M b.ѧS;B)fw~8n]7+>c7Y{)CޝZchiGa0na^F P)$Cccߍ+?SrxX8 kZڶ`Br }gܯ}Y1fEa:™S{hszPxwvzՔFn>>yVBa7@<(v2d^h0Y}˳>|ni0smwf_7J w?tyb7AXAhoI޿9brt: :"E4 '[aoo:Oݲ<=o§Qk:wE-O,DqG hGHw캢ļE-;/t8M{י̟9}3f{^@UeoMU;EʔWp= KN .EDZ ,ޫ*_9)0VOܐdo5[Q@&oBӕݒjCˍ@7Zuhds1gȇd lX[ڴ ==g´Y6oUOH\~ƣ~ߧzҦUK6]s`մiҜGU,aQ;Wv3MB`*֮$4$ kW*E_9QnE#MQ%\8\M7ɊbV-ؾRen׏M!j G=bdnt=,OxV78:TׇM!j^OcOnNHI*֤]ӧ~"*M!jG'gF֒6t orTuz4UT+Ĝ8L1\։$ASمV!x0uޝMw-+˄:~+Myz=<ح~ LέI5.ړ^QfdRKs~E1a͕y)D eƐ]ͨ 9YQ4B$h !IB!4)Bh$AS!HBM!B# B!F4B@BPlb(*^'tojd439}:{vwbe7)oI;88G]kgׯaI1pw8ȏ#;=+o)b2q~f#<} Đ+$h Q 9O3xmWvs%N( ~iV3߷̘$h`4aE!!>*)ՖNCUL&S4шc]_@/Opr5)rtb2ZLC_,MUj: B@:lPUE1 2SN3hPDFZ+ }i MeyZ˾We}#,,Jvz6(2@$ 3s!6gL羡È<iΣL25] 7β,djr׎4Ea7xyL?&˳_d7yEAT^+WʑwE++tl*<[J:)LUU-.L4O.Q[b7|hjs4Ѝ\nUzkH;gBXWYUUaaD._Jӟ9Xn y@'D5^-h1-zBx@[&D1&XJ&۞ @>meX8 ^Qhe C_lQΡe*$Z-,~)"ܝpwbOѪͥ.&tbIi.9b26ƿaO҂Ԩ,].mIѨa6&z2ͪͦ#mq{bOWL>[0I3n;V'>&gףM<ڙEOpݼiѳZX8F}IwmFf[cT^ygߑhzwla~ݻCK.w[#^w-ӳ]=sXRSJ^L^H߈3ro2vwJޠ;7cW>~X־ KN@oΧdsO8rjm[ L"/syT?ݶ'ܖ3Lܗ"бu8I`NdҠ[{1hۊOAbuFkchf+b+h{a97m"ݩEFZ ֮d⓳[jݵTwWTG &CR]t<2oXy^w+:U2Z?C@]g BBx!X|ncBz gNW]8eKy5C, ڔQ, Jd˕ChI!ts9>Y` ZYJ[^aeOᶴ 6>lbm=ͯo lBv(֯|ehcafQY>ZwwZW?4&ke!͋$jsҒpq3Wͤvl4s5%<=]L7'=9FXx- -3Y>X(kjƧgx ~S1$ĝ#~np(IafqQ|nI>_prH+o,rm \AckZX,+ON(ENJ|֮O+#|L޴ů|E]*&:r|NcwҤUr:Сb25O*+c۵z0I]Nlť3ۈXS?)S7j4Oe{:0a3A?F \fL<ų&b:!4\啷?m1fg2֜1,5cVƬ,9[L&Sy;w@W6wgǪQMig귦wq5xd̋KǸ2b*1LDˍ@e9x bHۍ!m7<(C>Qrj7 &7X+c۵:nd_QLe߬m|b&:>/> vXR2?=+1>-iW"Gl,1[DZ9#Dw啷?G;}B`i77.1s'%ǿC|:s[Gk|[=XVW6c,t7!@UvoKiI,2>xf__#hƸ2W%=;2eG!\FpzfOm >tEDZ ,azlX[=o§Qk:7eUmn×CkٸS/F aۢ/2H˻#<8b4>==xٰn i@zz?nYτi$ErS$(YYn*y7մiՒ kWqCcxi\<<<ظ~5mZ4QocD%,D $Ϟ- IlXА`6]IE~DHwCk*y[UQ,*۷C4UQ4}Xz)D 舢*V,MM!j^/ITK:$mύΗvOa)D LgjժMÀrT*zOsʧ*W9q.c͹έI5 ޾~ɞ?~"5%7aNҔWSÛ0t3jK5.iIprYZ98Ҝ_QLss%`$h QCr1dWv3-CNVe7ATA=M!B# B!F4B$h !IB!4)Bh$AS!HBM!B# B!F4B$h !IB!4A37'RM&6ƧAZy-Uz_UZ6U-BTG 9ra7#,W~M $)\v\] ))(j4/?\ja؜l:4X4bq {leβk_K>s+c㋗G1aōY$][^eLz;; gAP1fr]8= `2LZ0L U,[1>cʵ-s8J|-Uw)*Đ5w3=+ITy=DxμH7ﯛi~SׅJ&۞ u\C5!?'۶jwJϼ.!5 f ,rp85WԜ,؁y_;rӏԪ1icN-h1-zBx@[&D1&[I۬ ތĽ+Y7{o--rcolAX`>CqcW c5,!lxLe\J91z< >aaDY'K[Pú{|d6m Qߙ/-Y޸[5Qk>9nZѲ}RfqSe+W1aXƏͲUi*Ι¯Z L;{+ hMn>[GΝ!Ou f2t>ɟgN*d*Μm1ģYt$ W[ב68s=z۫}}!gOܜ{:*MQ" IDATѼqα<=bW[^wcarz˰ߚ1co{YO/ecok-cT}43צ<?q{ZI6f^nmʶv ͛żlfᓌ3"APKiϜ9~>'>eԼu6U-ˤZypx7l+W(/Ua|n5:Mlt;Vs% o5i)XWDSOᅹq5ZiLϭ(x lv~ o߻dGܶ*=h]7!J8̤JI# U+Ų(" (*DA  "bAiRM)ILy)̝̄g>d{s=s2Nq[+Ft~QYins>?c;)ZN"i[ww;7gXjܸ^Hw߆W@m3Il:yo[S_/s]{Jۖڤqr\ \hF !E>.DV#ojߩ;LFי]NСswP~:V3$!0U-zWV0ˮؠjIB\Hj,] xQ{B)B($IS!PHB$M!B!IB!B4B$i ! IB!)B($IS!PHB$M!B!IB!B4B$i ! IB!I3/7V=|Mc5i_PϕKyTT=PW~BTvJp1~߿jѭGrlj7o÷|5瞾Z&KuSQuT o?qvq1\nNB>%ϖ兹X:cO=eDtj\spKW_rb̸/婧*!jqz@[L..zeuYs?f`ԙgpV;\!DRmfE8vRv`\񼗣?l/*+-z|^r!ݓCp(m^2ڤMXpMs*.4/! %, OvD$w0˸j]ckd73,#o?~M hD&^,9gb|uI:tI{a%/(*۲( q=YrfnY~"ѱyo͸m̚B9,$sfc+%GI+fMcvn˶X|/5_sb}"DmVk#`=q sGUߊ?繷#Z'5?a:X4U;ldw~>Q 5*|U|#ⶔRaiLXkweHjUƳvgMoƖ=/DmUmn6u-;7ȄZ]_\r&YXשgG:C3nг}[N{{m?!%6޹ڔtwN䃥2+Vˠ$d$kJ=1KGY\/Vrue%GIW2imPup}/g=4nUmv Q[#M?29X7&甪JzrS/cMbI)4lY<|%*z~k,^t &0۞i[' .u9R&kk0d}wgp9q0E*#d6Xk۱?L $\qyZq<7uQʤ-4؟Gok?lbu}EHnDg?x&Kϐy\j#Y>},:GY'; 3~F2>f+lK}3.\ǛfM[gsh5n7)jх&a / +&?e6Xk۱?J5p˧C.;%Q5pxQUZZ[YLo"rRFƺuK-3gC!p!ڈf]8i:#2"82dUϟ1SoA-'eUm%l+%G0u[0q /d0;_e~ԈR;}hr5mt ;W@ BM+j2F,w`[Bp f.KE#4 &o4_Ep֘r3c-!j.t8wn$5|-F:.gŊ`̅d^O3B|>kVx٦'l #@N},3^gv9ZChv1QN>)4#ɪEtq[>_ F#yyT-%IQQUhͲ ؅B[B)B($IS!PHB$M!B!IB!B4B$i ! IB!)B($IS!PHB$M!B!IB!B4B$i ! IB!TvJ搟c:.56j9긓[mXcVmVQuTÉ}^˪wF}ͺU}L.]: }*M 2?7Za.Z!ɡۯnWM~Q>"iϼ6}]\J-OMMO?%ry^}[LcXWtq_ wT75oS"i5e#FeS{_VTږC9}<61aWvU/ʧ$M^_fŒo߾DGG^X_f/U/7=QLNc;?$̊2R7]~~,X@Ϟ=֛7m.%EC=8(7=cM6͹,7'V!^e,*rz85i ^lݜk1ti|1 CơF-nܐ˾7$`6>}EdFC'?@PhC9dtq.]F[Pk\wtcmg#(~MyB2ٕ! anti6mrÑ Y`[#a]/^=4!|2^ Lk(z7/5c~ھQw݊%o>)oUɸ(dn,MvI3##ɓ9}4cԩCoZ:tI{a%/(*kc ao?v:|I \{q%c'j 8kŬiϿcbrV)>Gsf{t,ssa[h:vc;ڠ ʴǞ\hu`~әۏ1,9afVji[BƢ%9+{gFRSx@ɼκUK m˂ سg!!!۷=z-?6{1ʬ?4P{j9sNdhʅ .{?}JZG}6hUضJvXՏzC8|TvDr^څxݶ\޵e0ў8z\X6~OCqޤR]%鞖-XO&q?;;(nsU}# *XH=ڋߏݭYs:p=JR;i]{?31hKUɸ(Xj]6=dY7%~r5B ٓ={0qD\\\X|#y] "Wg(zzc~_pUxYWhXܿ-ꓐR|v$VA}%mLKe?͍WR0. BTNώ?e˖HXXbԨQYw}Olgy\_-ߝ=s$`4*^[K3m_ vs5\#SvJ %=D+.KK8w⺭whx]~(wq/\uyx}Cg%ēxŬo\ھMǒJ!81妛?͍WZ1.̍E!JVIgI&3[!cŨ ZV?Qqgsh5n*gceǠˎfgM {/=Cnn0suFt[ɇS#ɻq}^HQ,YNu=+x?ݙ`e3)W]`qE$j<*۞|Xt>R3rȾuC;YٞёEgiLʃZtaI78ȊOپ47^-f\BT&$˗s}^:xwcmo'Sq/.=ÎЂUV0|ix&F6vt.*_8i:#2"82d-[~\6E{~q٬|6f# l6}o2S)k=8KwنW@KڏakH;Mÿ`3ӣ} LlBaj4]\=֣WH^^ve'[yX t{f>f%Q !Thͪ_al }e!줢IUŘ(F !2HB!)B($IS!PHB$M!B!IB!B4B$i ! IB!)B($IS!PHB$M!B!IB!B4B$i ! i*;%rs˱jWw HWslk]v4xI3?/'U5ԍn=u3Uwve5b1toI]BbCUܷU1I~Rjyjj*~)cưh+ӿ̤-[wjM˖C9}<6'~mf.)X_*۪SyTLۗh"""f*jo?jg ~9@ׯ_&&& гgO3ٕ! antiE|%8 o .F4%Q4&v2ִܲ髥yX;3L8GHԁ!}QqoH(al|#fۻ:n[곦/=}p$=hnu׋0#t i` C%f7=cM6͹nuٍf! ȒeR_c_ YCi (xO^7~M([7Z.営 Wk/5r+k%̍5K}l]kb4ދ2Oj4322LO<ӧO3on;˒ f/neϾ^k؃%ǣL,.*S{;f>(.eVxj93W-Q[57,vx/dŞJy罳t#)Iy7Yj mY`{!$$}ѣG|Aۢg:f/&zZ zz-XO PЃ?(u[_+=:p=ʵ,BSfֶܲkl:ٙ= 9#;m]ܮVZOsߵO2G%VRǭq+k곦/=}m :q#zwkVcU=}9C`]'2 4 ߱MKV[+ٻ+;`ν L{\?Y*b+,kV־Kk\JcR2ޕ-{H>5Yl@6uYl i&$$гgO8q"...,_n'^ɤAIYiuݚ ޹+"T5 \ךe-9>x_vm`-Op zo[tzM&jݶ*'ΕIDAT\´>ke`⟃ꓐR|#(<U vk?!%ӤVA\42W2O-mJcie]scRkך,B[Z%dzl2 СC50N%HڹE]|.^vĐ_r>g]r1~7B +ʵly~nXZ UkyasEeuH8s(8Z=갦>k -7ēx=js=|¤xg_ 8-lei;p;K1X-k\Ĥt{^UJP8 M4ɮ8ǡˎA͒8Z MN / jN{aM}%+Ft~Q#L:eWؖ=ԈmVk~%jKgbTxAl_\f=e+Ka.'މ&~1/v|o2cvdnYcsZnyVFk3ebj^t ???essrX4\F 2Ÿ;ۮpyުySm=jzeΚ͗ԝEs&.Vkй;^SQG‚,mEtq[>S F#yyeWoYk+n!Z$MFC^nV|5.?^! Rѧ鲪WTB IS!PHB$M!B!IB!B4B$i ! IB!)B($IS!PHB$M!B!IB!B4B$i ! IB!)B($IS!PHB$M!B!*A`WJBq*;!DӾ*zK !,GIJE{TYTj}h{wBqrv쐄@NsI3?/K/py kZ# zOJ^hSa !HNsISˡ?~eܸF^gjw&/'_~3c^)D #sgŨi0r9 zF=@#mWv}JPv&sgũȹ.4PNܤѨ1"7QSY1*rKtpprg?!fJCSx 2gh0[!DMd߹SȹnIh4b4ڶ bABoZ&y$% xxx/6Y'ۤFx-.;h)DMfSȹӎG|NҩwP#,S~#WMɔWۈHB6'^΍~ӕ.ɥS("m FQ5Na"N$M)wݿ_֠g6ot~b0߼ٙ m0r^;PbGHw9{`M`BT=־SXr%/=|.8y4~~EO[~7碏O0h4bHL$&7m"/ }KV1$/]b+ͣ,i QsY^r%><:1dff޶\vv6o-xW77|\e;Ttr 38G]T?˭EVhh48=aϨEWR6!38NnVq'%4}?Ҩa}{I,H ר qp *}zƂ <sח ޚ1| n҄?$M=g.tOc4 >?fl \j\|0q3Wj8liN\0J&vlAI`ΟW_ERhip<~~DM떭lǭN^˺f˦U ;vi>'rnǰ+HIAƙ 9pAe:m6og4kñc~FY:}ZFRa4qqq##n$bO>K'#pu=[>OVnlYI{/{{=wRCYO6)IB\}5u*qgݍTRqww왳Ɲ-H<{݆&BJ/獡-2]<8QGݹ?Sgs;e7Aѹqԩ i]V[)n,5k֒y-^Ko.θ Zi=o>\.-EJ˰0N2ۖHI̜l}t Ɣ+))1Ym³cn=Zwtwo~'"YptY'w)^Lœ7p#OԫOaCKwN||9kҝfS&Ec8ջT3>Ǡ-<;6Զ#njf굷xXi} thRfZ}HwCKVQXbނ4h___RRCBB"9D||"K `!YYY励縊jN^ӴUߋNcȡ'8?6ώŷSN>Ɂ/> <+_§^]r.˯84lս?_ЪغHm?\PQ@> *^xbquڎ䚦5 |;>>R^=㹖IP9h2]QhZ*>>>tzocQofNZJ[<s@-<.⁝\"WIz㐓)r?ZOTݼ9ȡΒhLJ{.']c3oS/?~ŦƂBɚ3##SN{n^ 1ii9`09tׯ'??ndׇrjݵ%?inu,9wV#/lo&^tUr2x^rs(F j5_Cˋ_ N6ޠ%}wb@ɑ5wnn994'\;wx'qrt*OQ3x |9<p<^>dggVh489S]%UYZn Zوkm۰IwvF={O F99޽\pkЊ̴8ZU$M!j.oFZb3mGERO777֫Kupssӳ!C?;GE?zFZ.mMSO)O˄w]C/~#:\ :/nnIJJ $A=߈q+ u:)DͥV ߟ1G75j .#ٸ80 T*pqqU GFM4D=0voZ&<Μ1rde咛WpG3nn4|"w!uޠ§$,FA55sFn:(8T/HZw77 C=R*rۑh`X{7gxx](#CӣLZBy9* 8Pq !$^4;wes98! $9w1i햜>I=+O?g_ 1Tߦ$M!j0{ϝ@EΝvIj^A/;ޞtZqAJΊQsISRQ'I 14hhs:ҮR*D $sgũȹ揜hh4G~'JJEgg?Hbr-!D"s݉#M3 6 si0󑏫!9 s^\G%fk*$i !9 -s%Hg5 ;oB0וL%7{i)y|!5񖇁saAB!DMa#Z8DIENDB`netspeed_applet-0.16/help/fr/figures/details.png0000644000175000017500000006501411402462050016673 00000000000000PNG  IHDRAsBIT|dtEXtCREATORgnome-panel-screenshot7w IDATxw|Wn:-Q(K AEDAUQE-*Sd( L RvK'͸if\ҌKzȣ$s}}rȓlHk/":|Vm{݈oP 4 Z^9l+1RzoJٓOtUV*^n8*a ewسGԛP5ᥐ#$0p]*_{ջ Q t#&Oh̼b*GDDDD$F~a1 qzn01,µwcQ(uδ S#2A0:n f! ۈ#ߠU_ ;Cs@p[?*a%n}W W@06R,8YMQZ4ZxVeCVU Hݪuv/D?k ڔGk(o#w0< +av+euVj_36H6.}4 %gΝ;1nCMDPt]GpBGԏcŸˆωBZ- %![:ѡ{GUO#Nk6+ܬf^G/}Ǟ)sk󳦬m[d_t{@řk;{U/r U d_CZq" ιN{+E~zM^~úّbPr@A9RݐW\ubthc6O"Ov`6@F@R**roGD@]yNQVb[4l 2i!c:5oT&GKX7nBX;ݜst]ͭz\yx}ܽhb5=#cA ^7suyP~N~롶0Rl򧋕VPqyeD|;Z- A/bQ 컉>y!(dQbP,b"[u @BM?x+w c7I;ŒsȺ|2B}#=vzy )PT((6ead]AF@B^m @[n}fr5 z#$.YTU(>ހR#TkݺF'4B 5( >#;Pvk0, 1[ozkИvEŵea\EZ!i~Itʮ@nM?~0|^SOcml|[7{+Ͽ(GƣO-n6? We=<^PldĢG`2L_1Rl_Tݎs2X)66!nꏺ{.ف{+ȣi7 *\ <խb-g`֮ d$X^"]o;W$CGV_@֤ z{;McȏȀWS{@?ݦS7oN'4 CRi{j^lݭOUBzyG2 mA.w4x5Y;aMߞ%۷V}H3WOSmc)4u*^@ TU_Z#j&tҲrQJ'LWCnm#OeV&  <,¡*,D6wPM'|x5ϟA_Dx(Pn<¼||R#nŗU3Jo0˫w\o}!^P!4?Wm}[KRHJ, ԅ!SmRP_2DFUt7swxW ʒk8OYMyUmwH^ eۦ0_*t +Sޚ&Rezٳ*5,ԫmRF}qغPTTLLN&Fyi )«"myI H1&vU%75<2Ԧk2s@RRHzfx<gdqX]z)/-m 25POdQAs7`c i(Ep7D׏~g> /,dVC-Ů٣!7}?G=!ApW.}duyl:maӾB֑y 7 4$i/C&,~AFŔyr! ChB0d  $UmSANdu ZϞyAAnB#j2"$4d,F͛ ` TCA^^ШJ,Ӑ>8~ -'!<.ʋn ,ok yƧOd߭~Ѯ20ߪva\Ms!KUiNL1Aʓ87a/=#acA)!@i6?>ćSwY;$";_,|74[o]NpPxC>>PVW jvA5|)+l(Z￯z(2!-} /8UC>lUA΅ȹ@9Yˀmu,]1٪;"[~ z΀2t |r.]G΅P6mٹ~aF3dzaUA[c^*_~kh[>=zVv= Q465?*tҵ3A~>F#Tĸ+"-R?QM#p%,nx TTT* J Tj TJ nP*58T[̏ȓ7jeJoƞ%@$L0@9" Ÿ1A(V|a2| Kcw}P3)"0,cމ_^K'!맮) hP}_,::1=B1o_ bQDy%X h;TNT+|l &,io6/#poQyjN ,{؂/"<:-͞ Â:<ѯfmUk@{Ls)GAiw>>ޜDOzםvH2q.«Nz{~#r= MtsAY|Zn#?ϋD)<&›wͻZ|]7/[+c>[ ct=s٣^ڼrq*ZPgշ^m_K r(5:0ƚ܌|.@ Y1SOغ;](~L@PB:~8}6KW"Q(**վh+a@%o=t_HCboÀG0?0s27v6hڠ F+4E/Me]L=F@R,XԫsX ky{Ϡ~ucXGv2WFxF2Y/öΪХضBhj^kDQm=k kkft~ n)*/"OT9R_h/thys>ҙrۈqJFejrXbnEbQP*Վ>q%3ǦLj k5Ǚrۈ8~>P(sM Z]`KD'iE.3+[7{#"qJJ}irEFnkq\"{g K"s_V!"""""W}"ҙ)3r2/۱JDDDDDΓq.?Qi'`PLDDDDA1y<DDDDcPLDDDDA1y<DDDDcPLDDDDA1y<DDDDrd{mtdDDDDTല@N=]"eN-A16nb(-)tzSLDDDD)#ŕ̈pfqDDDD&riN o0IN9}<b#Apuȉ\GvoER32|B:jFREx1w 9zJ+qan ā8Wuwd2'Ugdj""""ǿ,Cfh䃔? 0|]~la ‡4Eo<%֘ 3 |r..mw`ggs=غuM$(MߟR52 ^DjO~/J Δ0K~s+Pb_OOgF=l zwEZg$˽sZ2.rp|t>ӱ:j v啢٘oADDDD9r0t'/7&q?\ޮUc:xJ|סЪrM{n;>~8p=dvL^wHm׼[ [WbOfADDDD[=s]Ml]1۶3OX/ Jϳ k?ǻ3fM4b`Oj)|\;B=rS q: ͟H1ԹtX&,7~Smy;g⽞-/jJoP8 r͖6t\8lA8|![l$Di'~{|~= -9%\>}"Csvぎ1z' [ͮy?kHͮ3a1 'v@ j'& #M0(^z:oV/yl=\^{ۡό?w՜ϯÿ ĨVD!*O1KdOj""""rCSkK0rhB.bA>]Eڞo-܄CqƷ(Xf{;Uo`mq`NX|_ C_Ai6n#E/aҋwnG*@MOd2g7ۃRlj#""""r|no1(.x@%*0u] qZkabmHǸ IK>a὚ *s8gݹeP,I\]""""}cPLDDDDA1y<DDDDcPLDDDDA1IJZ󾮮y DD$ ijbDlE;""r)D$)&""1 NmvQM1(&""K8YW29b""""x Hr8ZLDƠ<b""430(&""I(șKX3b"r4DDRF9ZLD $w "g`PLDDn19 b""p$O11rbk p܂!Igr)&a]uVي#r1dLDDDđbr+3/>Ʈ 9G0&"""{H1y<DDG1IkrG p)br){xr$""bPLKlDDDJ t4* 9b"[ DDADLkԦ#.fha̓{Ox#nʰ \,} y"9lTSmsJs=.C:<32TӰ{zib>Jqbj'%\} ~ qWښ6Xm~;m옰8q^y z}{G БؒMCH홧;]5#nCS'IG߃ږ9z(T?K|G{LH]mWmuy‘[`QDO:#){٣''7s}\#B#]bۗ_pXj/׆dbwYJ}[a]A܁n޴jKMeSc\9!০:lNL[vtS'ݵ,>ankDqD'\Rzbh{g򬣉&:k_1eڃ|maM}tV2w:b_4,m$:يvS)G"/3Ft'kך9G2Qx UmM2"թdpH5HRe8kԞm2L/Q)l.#\}0˞ 0lcǽO[|-Rū"1j}-g/*kPgY̕ IGzO*R_mym(DӂbsTGL]6vI\>HWl=N^ k)9×J j(3OB]u&sIM>oM>2I_;ktAc-Lc_)HiAq©2#{gdYLgHjhm..cs@ZMRN>N9rFR咩-*]\* nL1Holo/{07n3+ǖcց@cGZޑU榌[ #ĎqM/Ia4ggٓ#9+5(m&P4N̵P1JkK͑@1cs9C,]fDXҚkUk=v]rkbjpGjit3lgSJ]&&n{9i5>;8]cz[uOk(`ݑt?cřg*!1}v]#\mg*v&V̱,v6W[ 5MyWi#dF^_5|϶h۩bQ'Lqեa)ChRm^GN؞֤R䎤eWsV_'b#j eb~ 1ٷ.U6m&n(b3ͬ O֚s&"|8ID+[۰M6i[}&&(筌B~boODDqqn}1`!G`GKDDJ H G<b""""xn9}9JL$}̭CDdO. ۵j]Oi:tZ56~@NjW GYAEWؠz Y ?۽ v>D{N[@DDֲ5 ?-#~m߈~=՟N{` syX%dl]!1M;o KMNp`9__iXd?}llS{A1d nu'$][=i{4"Jr6a)kݰ爇u$<\5ۥ˓=gg@؝_W] 'r>N kSsෝJ2Z@IYbт l 7Ĭ Pvvxa %Y2)fˁXg11#z\'B؞tW#n;o3IӂbV`%M`qxc[Ux2td-4RmRez tq꺻r4Ϛ~y"iA?eFȪq>|&}ҁRLvnXXg1y -T)^smL9ŎTky DDРXY^׮b= G5Μ8 ""¾e8taKlA@V9HhvaﮭdvDT;ϡAFA֍LD&AQCGgW : WW< N""sbA@P@V:(R@-DT$"r.2 M=]Ihn՝w9ÃbLAn@4c'"aID\N)F9q2 [6|EgzAh N""rZPl*w&O0؉U,?sjb΃a;VqG{9D05Jx8D}{s 7eﾳ_U A &4 ѵi4\l-2:Ʀ@.7i',MvOvZyMt^1ohNJDFT~L Eǣgb"{b}"Ԩr.eNey2ZF#Q>'9QDpkxx6?MśElꏧaRZO;v]8e0gt{;/]dYϦbޱ3WMuP~:੃-,֩It\8im;z_?gR1~,}Wu;:. w3C2kRX^INa؁>6%fz⟶qN]NG3_bE/_x:>=z؉=꒶=ދyoL?;oM#f{ N;wc.oLgG:G29r2/(~Rt^DR@xmX#лS[1VWvuLlƪ:喩pTvD[#0ϑ=`@R z%]T;Z&i f4B½'Sܶ[Z5v,m{㖶i>fm9l1}TnƾNۄ}mj.4o퇕GZ#,]@GK:n@jȰ~n(κq&\*BP"xzzoK:PH,mu[5ڲ72*DULH4u9 ?>V]+ @/غH,[^y@e_-߸N /n1{h6%f2햖Z{n+PX>1Ǭ-mþ}'NƘK+f;-ˀ{[U`n}fFD#qcW5FFYÖn;$3.!SR5yo^ԟwrk˨S/yWNWwop#2Ac͜\ YjGCR~O4mOڅz/OZhsY L0-Vc}o +f{ N;wc.-ixu>E;3,/a껿"ǧ*=A]«KxHGm,T%g0o5`vyl.s(/[nmwEon7YҺx!`-bPSbx~xmԎ,V>9B)pa 2P,O5-%Y?'tȶZ*_{c7n^m1}r6;wdilHG`PlDވj6c;UHQ`kh14j8~ f<]>mzm=dy= u  Q 4G~oS^|0}46xFM erk'N5Vs53@""%?_ɋ9~!bZMA&aT|0mmԎնBXuH"nCgWm.TS= vYP? ܃#pȶ*ߚP'?GNYG}r6;wdilHGp~;* ,%/7ou_aSM~Ywa8oyR;wJv;}'mS~[΋Ld/o4 ʢ KD}'$r.o!K;]JcZFF=^Ŗ7vu$ϝw$r.s9 6s9}RllK`6 ,?;9&ci;9A @߿NYVزGWA ; N""rw 4ue=ttOQC.sk""w9SFA0ڱKhN""rxPP(QQWǮR)P(\] "P;ˡA\.GHh8.EhX#l pQ"r;ϡ}Դ9Y29Y8nK Uy#DDБb/_C8{0 s1rMԋBiqDD}'94(A_4Et|1LQCU^N\}'9v,+E;7$""""Ǡ<b""""x 1(&""""Ǡ<b""""x 1(&""""Ǡ<b""""x #c\]"""" iA3Ѱ1.xYE:vxd&6v kG:!>MiĨ8tKw^ٖMU <[3tJӰbP4Gׄ u$C),Qc@Jk^}#YG,-gy-x9A%_ș`§0驀9E;[v%bƼ>2>Zŵ"v&!(Pk0fz6 Ц|u4bUWÖӱ:7S[ϼ?&ᷕO@09u%;WoY}j_;j`*F5)<ǕGU2R|dzdu:#+ݾ^ocR,:=qdޓz#c߼蝔z b+^Ԕa{)>QqXhG״\9Z5ETXoUD-X;̦'8i9Ylr$y.œ/amC3fͶCX7c(uo=/VorXydޔI1gz}>wLZY.,ꟌkzAy rs}!lcOJ[MMS%_/ØѣO%˖/:fw FX-':`3qbX4LJy ,~LMy[RC0@Q,kpdHi]+W!}?mRZ[LǧFQÈi1c"0]$ی]-MoNh4GFSLmNMX.K~Dr_Tz&l?xm× 1v ȼX?O""6@n#D`&F?8Ol IDAT{'3hW:?,k G4_os;o0izIEw~UTMp|lv.169CB&/bkUKylQ> ho 2!Y\i+QA]q/˻_$M{Yˣ )ju|@/ 1i?QP$fßgS,o 4{V](2M kYit0٦X|@<1Φ:[5Q#M v ˿Q ƛ1mWd;_Z/EX#zؖ]! P^x _ܖ>Y,#˫yydCGzL]ltٓY{|0}4z&Ci^/,o63P^8~acĭ.o,Y݋53RTFŝ&7{SSb7+YgL\ygMGw}Wf癝HY>UE${۶{,G$?(>mE~s}zڂ9->meϽ>=K,ϱQMQɼld1QN#"IʸrK,Ƭ+(P|Qg""""x 1(&" " cPLDDDDA1y<DDDDcPLDDDDA1y<DDDDcPLDDDDA1y<DDDD$GƸ DDZ" iA3Ѱ1.xYE:Exd J`RZ%[MdK@|Tm;^ ~?%}\v [K˙js_[hU;@Y|:ʛdFbT:%;AY|J/n۲*qDgK~֡9A’WaoUrJrN;޲F﵃FZ#()]?`8z6G/ t˖b܁Xt,?$a٢3?iW6;3.aթ=Ӟ~-䇜E4|{,'gMKSپo,ǒw#O]-ZjGGfXz3; ||?&͢31G=<<2I EMvOvZyMε1USD5E&IH]5I2K3eD̙k])Ԗwk3j`y!H!ÄF8v:Ӫ},^ArOaE/ '6Ci^- ߟP-o@3/k6cՇc! !X/^1ti*E1|6@2K-&N~.|>g>&M~^2Z^ b"͖g /GnQ9}}WX.z9^0?)<,>o @"͛}q7SƘ+s`ʤ68<(^lӑ$EŢ8?˿H,mu[֭OR@g6Kcw4k+Eo܀_fqu,Q,k`1Nox16(κbL~:%?;>*a/3I {BW@+UD"" Ta} ETJ: %={?BB3|O-;39̙3w#U/U9?~H_Z\x=._7GPExyZo]ￓ#߁YHX:WwG"?+܌NPUWnUfOHdfw[o5")Oe ޳ʺwړ(Ӹ~]5;WkkI@uh\:y ֬``N9{۷݃{Fש͵-Okpj(~sRFYQ#%o=c an'^Tm>؟M=$ǫCK;>.h{9᝹piUWn]V7$z^6H?DD Dt0ij]5VQ/hKn/ѭaOY9uJM?_fbUW[4;W&3#7HDDDDӒx<[< ĒSy@YDDDD\BFpnD JNڊ_qC|65so,#O[+Odm=CX~z6y/Dlx4=c|ϋG:Dew*wS-6b{kz9ihUgBjۏ_Gqz(ٻ>}O&! 43NNgW/Rk-͜8E:.`uKe{OWCB_;hBu <5~Hg1dJΖo޷[HQ r6U_RBNIvF >B~OLϡKT8vhG*yZLa`[|TkRgi aԉדq.#bmT GWOmy^xk?X]WżᄵsemT|=KNd3zfϹ7g{j2S8̼j7+\l6m1vȕUr(.~eݒUHXڪ㶪RSjoh)R_N.-9mOk~oˑ_><5۾@TƉ3msX5IsznZKuuV6U96X'n0zSswU O횺ӡdnaW }*~k8›cz-*-x{ńSƤjưޅg<ͭU?|"{++y;WXڪ㶢8OMy/J}9=?m2`+LVc*18 Szeۚ4 XZr{I,$g,ѫcՋ̯p3 fO:A:NEmHB~KH"nU;qG"'FGcAqdￌ`gQ{|OT}>g~ FE9~ "ݮZ͆c1ұ`k ЧFm=q u_s.0Gqd\>`xơU[mEqFZW7S] ]Mʨ_pz(,ڗg֮Wzں?o2gJF7;6Y";M$@ |l5^E<`6|vm/c~mz/' 3Ô7?չTWgu*jSE&ö~.1ݞa]Ej3U /^_Ǿ&m[\$!1Wwj8Zɥ'Gc]2W=e /g]Ƚ$$*Bc}Gͧk7vC{:θXڪ㶢8O{q:7OGE2.-=Mi/3v#"$"B/JCqFYDDDD!S(P,"""".OXDDDD\Bqݣ)1fբyG -8Dvv6uCI4{Ӷ2,֦834EDD#Ge#lb=gPL/~,2qdGO/fvϡW@\#//YfҲ&mEĭ́]izl0MSXDDrT6{F 5p8m/ &oFz=""1 ۉOp6i҄hbG!Sa1=6n[9sjū /s:vdVo^^>o,yw½f7 FgG%4|:_81k[Fc=dW\ibPRB.0._#7k>~)MsHm2+bƧ߯.\HP` 7 fzf999헗Ǭ9Ò7Ϋ 9ٍQ Şdm'sk;Dy#>t,_jwwwVwn[b;5ڎxz׺g2VGXDDwZZQ1$%%BXz`\!<ƸqvrgU.gbP,""6uԉ?hR z:¬gIdT$ŸyTZw3Ϫϩ]NF)6KPId īo/B0>22nM46mDT9t8#'kW6]K|J2:m mKӫqA'^YEo1ُY-LVZEXDDm69lM%$8DFFÿf3$::tBCHݛJzF:# 2ϲ[Til!bqL,&6Lf`u1aC9TPD7ވtП~?od׮rxvb69|HE4/z{Uea݈n@`6b_Qɗr~pa~9}=q9}fԩGJJ AAAdL'::ϡ]Dǐq0 RRRHۿS]FVa| 44f[۵p8EЪE+ņqp"3%ƶX܊zSge#).}ˁt1M3* ĉlэ'gp}~k=@d$iȁ Xuƍ1wp;?6 U~eȚvߙ0c`a^~90ol"""R]WӦL2}DJxx8$?$)SjڴrhCbŧru=v&|<-+;2mGɺ2,dA;64M, Vt4c^s5!XV, iҴ7٧jxf>_ AW#dlbٳ˝.,{~~G"_O<|P|=bƧ^^^L2ǛL2&!>Ą@U2}[J$|4n:zҫ'ͬn6\\n'ֻ4Aǔiͭ$]Y)ǔm7+lAD[ۯ_:?ie&g%ү?FʲGT_Μ7#"""Sld3 0L,nl6d͠ff5.;X0m|O'Eu>%9-bT)vssH1F9>JSs uIDAT}S1?[\\|}}3[fG 2˖SXGOoOp4Y{wn{6سG8#o[939s"<<ǏハǏ#**(fϩ:Ƶ zq 22 ط tnݚO";#32):_۟{03ndd$8(no_c{~=OsY0u8Ź;) Fmyd+Y߀OX2;3.(';! 23ی4RRR%30!09dgyNqc밮Nl䘫O8(Gn'EK ޗQXXĎ_%t<0^|c,)da+(+o0v }(/~riGDp yoa%%lCnpm+"""gNmsss=YZLfV&HNNaoJ i$%KfV&cgͭSaUCW﷑y<]ǎ!ؽMEhN+b߀[V^'.%e; Һ_םוl.7ƶwOnS΃).=@S,""wLJ 22iѢIII=rI>˯(.E$((bK.e1XͮbBuc벮.TarեCut8νsȯ~+-?c. ^^@xÉ߹a\7__̠ ~]-ǝC^yyf-~ȡzo%EDDqM6f׮]\н9ľHVw &ȡXd EEEq<8AAW.:EkWSQgf5R\_gZuC}Y~{- (İZ17l- ?m~Ъ|:S?(4>5}.(($?А0R޽{9v(C ó[V|}} #(nu˫)xxxA^^M4cOO6mBq=8$[J-0UNPI4Mux@?HlMl K(ij Mhutߛ lֻ]gi%4*FV+͛5oɻb9 'Y-|}|0nnWl䰑b40 [= r'JyIan^4 nVlf30VUJ%C˰[Lٮ0l)iꚍJMӠ蹹ּj+qf6r`(6>[D E-=xE?z:Z2 CXDDrt6F Vfðw"$""WlF~&U9u*SDDQ6rgfz_Ó6;㷟Wt 4˖V9Rlb67N_DDDDD2[iuOάIENDB`netspeed_applet-0.16/help/fr/netspeed_applet.xml0000644000175000017500000003446111402462045017000 00000000000000 ]>
Manuel de l'applet Netspeed v1.1 L'applet Netspeed permet d'afficher le volume du trafic sur un périphérique réseau donné. 2002 Jörgen Scheibengruber 2008Franck Charpentier (blackmajor@free.fr)2008Frédéric Péters (fpeters@0d.be)2008Claude Paroz (claude@2xlibre.net) Projet de documentation de GNOME Permission vous est donnée de copier, distribuer et/ou modifier ce document selon les termes de la Licence GNU Free Documentation License, Version 1.1 ou ultérieure publiée par la Free Software Foundation sans section inaltérable, sans texte de première page de couverture ni texte de dernière page de couverture. Vous trouverez un exemplaire de cette licence en suivant ce lien ou dans le fichier COPYING-DOCS fourni avec le présent manuel. Ce manuel fait partie de la collection de manuels GNOME distribués selon les termes de la licence de documentation libre GNU. Si vous souhaitez distribuer ce manuel indépendamment de la collection, vous devez joindre un exemplaire de la licence au document, comme indiqué dans la section 6 de celle-ci. La plupart des noms utilisés par les entreprises pour distinguer leurs produits et services sont des marques déposées. Lorsque ces noms apparaissent dans la documentation GNOME et que les membres du projet de Documentation GNOME sont informés de l'existence de ces marques déposées, soit ces noms entiers, soit leur première lettre est en majuscule. LE PRÉSENT DOCUMENT ET SES VERSIONS MODIFIÉES SONT FOURNIS SELON LES TERMES DE LA LICENCE DE DOCUMENTATION LIBRE GNU SACHANT QUE : LE PRÉSENT DOCUMENT EST FOURNI « TEL QUEL », SANS AUCUNE GARANTIE, EXPRESSE OU IMPLICITE, Y COMPRIS, ET SANS LIMITATION, LES GARANTIES DE MARCHANDABILITÉ, D'ADÉQUATION À UN OBJECTIF PARTICULIER OU DE NON INFRACTION DU DOCUMENT OU DE SA VERSION MODIFIÉE. L'UTILISATEUR ASSUME TOUT RISQUE RELATIF À LA QUALITÉ, À LA PERTINENCE ET À LA PERFORMANCE DU DOCUMENT OU DE SA VERSION DE MISE À JOUR. SI LE DOCUMENT OU SA VERSION MODIFIÉE S'AVÉRAIT DÉFECTUEUSE, L'UTILISATEUR (ET NON LE RÉDACTEUR INITIAL, L'AUTEUR, NI TOUT AUTRE PARTICIPANT) ENDOSSERA LES COÛTS DE TOUTE INTERVENTION, RÉPARATION OU CORRECTION NÉCESSAIRE. CETTE DÉNÉGATION DE RESPONSABILITÉ CONSTITUE UNE PARTIE ESSENTIELLE DE CETTE LICENCE. AUCUNE UTILISATION DE CE DOCUMENT OU DE SA VERSION MODIFIÉE N'EST AUTORISÉE AUX TERMES DU PRÉSENT ACCORD, EXCEPTÉ SOUS CETTE DÉNÉGATION DE RESPONSABILITÉ ; EN AUCUNE CIRCONSTANCE ET SOUS AUCUNE INTERPRÉTATION DE LA LOI, QU'IL S'AGISSE D'UN DÉLIT CIVIL (Y COMPRIS LA NÉGLIGENCE), CONTRACTUEL OU AUTRE, L'AUTEUR, LE RÉDACTEUR INITIAL, TOUT PARTICIPANT OU TOUT DISTRIBUTEUR DE CE DOCUMENT OU DE SA VERSION MODIFIÉE, OU TOUT FOURNISSEUR DE L'UNE DE CES PARTIES NE POURRA ÊTRE TENU RESPONSABLE À L'ÉGARD DE QUICONQUE POUR TOUT DOMMAGE DIRECT, INDIRECT, PARTICULIER, OU ACCIDENTEL DE TOUT TYPE Y COMPRIS, SANS LIMITATION, LES DOMMAGES LIÉS À LA PERTE DE CLIENTÈLE, À UN ARRÊT DE TRAVAIL, À UNE DÉFAILLANCE OU UN MAUVAIS FONCTIONNEMENT INFORMATIQUE, OU À TOUT AUTRE DOMMAGE OU PERTE LIÉE À L'UTILISATION DU DOCUMENT ET DE SES VERSIONS MODIFIÉES, MÊME SI LADITE PARTIE A ÉTÉ INFORMÉE DE L'ÉVENTUALITÉ DE TELS DOMMAGES. Jörgen Scheibengruber Projet GNOME mfcn@gmx.de Pedro Villavicencio Garrido Projet GNOME pvillavi@gnome.org 1.2 2006 Jörgen Scheibengruber mfcn@gmx.de 1.1 2005 Pedro Villavicencio Garrido pvillavi@gnome.org 1.0 2002 Jörgen Scheibengruber mfcn@gmx.de Ce manuel documente la version 0.12 de l'applet Netspeed. Votre avis Pour signaler une anomalie ou faire une suggestion concernant l'applet Netspeed ou le présent manuel, envoyez un courriel à Jörgen Scheibengruber. Applet Netspeed À propos de l'applet Netspeed
Netspeed Netspeed.
Netspeed affichant la somme dans un tableau de bord de 48 px. Netspeed affichant la somme dans un tableau de bord de 48 px.
Netspeed Applet affiche le trafic réseau sur un périphérique donné comme eth0, ppp0, plip0, etc. Il peut également donner davantage d'informations à propos de la configuration du périphérique réseau. Icônes de Netspeed sur le tableau de bord Icône Description Loopback L'interface Loopback. Ethernet Connexion Ethernet. PPP Connexion PPP (protocole point à point). Sans fil Connexion sans fil. PLIP Connexion PLIP (Parallel Line Internet Protocol). Ajout de Netspeed à un tableau de bord Pour ajouter Netspeed à un tableau de bord, cliquez avec le bouton droit sur celui-ci, puis choisissez Ajouter au tableau de bordSystème et matérielMoniteur réseau. Paramètres
Paramètres de l'applet Netspeed Paramètres de l'applet Netspeed.
Cette boîte de dialogue vous permet de modifier les paramètres de Netspeed : Périphérique réseau : choisissez le périphérique réseau que l'applet doit surveiller dans la liste déroulante. Habituellement, tous les périphériques disponibles sont listés, cependant vous pouvez aussi en ajouter un. Intervalle de mise à jour : saisissez la durée entre deux mises à jour de l'applet. Taille de la police pour le texte : saisissez la taille du texte affiché dans l'applet. Afficher la somme à la place de rentrants & sortants : si vous cochez cette case, l'applet affiche la somme des taux de réception et d'émission. L'applet prend alors une place deux fois moins importante dans le tableau de bord. Afficher des bits au lieu d'octets : cochez cette case si vous souhaitez que l'applet affiche des bits par seconde à la place des octets/s. Changer l'icône selon le périphérique choisi : habituellement, l'applet affiche une icône correspondant au type de réseau que vous surveillez ; un téléphone pour une connexion point à point (modems PPP...), une carte réseau pour la connexion ethernet (eth), etc. Quand cette case n'est pas cochée, l'applet affiche toujours une icône représentant une carte réseau, quel que soit le périphérique surveillé. Toujours surveiller les périphériques connectés, si possible : quand votre connexion est inactive, Netspeed cherche une connexion active à surveiller. La boîte de dialogue des détails
La boîte de dialogue des détails La boîte de dialogue des détails
Cette boîte de dialogue affiche quelques informations utiles sur la configuration du périphérique réseau. Adresse IP : l'adresse IP (protocole Internet) du périphérique réseau. Masque : le masque réseau dépend de la taille de votre LAN (réseau local). Une valeur courante est 255.255.255.0 (pour un réseau de classe C). Adresse MAC : aussi définie comme l'adresse physique. Un identifiant mondial unique pour votre carte réseau. Adresse P-t-P : l'adresse Internet de « l'autre côté » de votre connexion PPP (protocole point à point). Octets rentrants : la quantité d'octets que votre périphérique a reçu depuis qu'il est connecté au réseau. Octets sortants : la quantité d'octets que votre périphérique a envoyé depuis qu'il est connecté au réseau.
netspeed_applet-0.16/help/fr/fr.po0000644000175000017500000005361311402462046014052 00000000000000# French translation of netspeed documentation. # Copyright (C) 2008 Free Software Foundation, Inc. # This file is distributed under the same license as the netspeed # documentation package. # # Franck Charpentier , 2008 # Frédéric Péters , 2008 # Claude Paroz , 2008 # msgid "" msgstr "" "Project-Id-Version: netspeed-applet doc fr\n" "POT-Creation-Date: 2008-04-13 20:55+0200\n" "PO-Revision-Date: 2008-04-13 20:50+0200\n" "Last-Translator: Claude Paroz \n" "Language-Team: GNOME French Team \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #. When image changes, this message will be marked fuzzy or untranslated for you. #. It doesn't matter what you translate it to: it's not used at all. #: ../C/netspeed_applet.xml:132(None) msgid "" "@@image: 'figures/netspeed_applet.png'; md5=11ef0533a2be1a5d1a9de77c4cec7f93" msgstr "" "@@image: 'figures/netspeed_applet.png'; md5=11ef0533a2be1a5d1a9de77c4cec7f93" #. When image changes, this message will be marked fuzzy or untranslated for you. #. It doesn't matter what you translate it to: it's not used at all. #: ../C/netspeed_applet.xml:144(None) msgid "@@image: 'figures/eth_sum_48.png'; md5=5113ce28da9b7712dafc52b3c13ccf32" msgstr "" "@@image: 'figures/eth_sum_48.png'; md5=5113ce28da9b7712dafc52b3c13ccf32" #. When image changes, this message will be marked fuzzy or untranslated for you. #. It doesn't matter what you translate it to: it's not used at all. #: ../C/netspeed_applet.xml:173(None) msgid "@@image: 'figures/loopback.png'; md5=0636b7d65b0626ee5e92dc0d28be5871" msgstr "@@image: 'figures/loopback.png'; md5=0636b7d65b0626ee5e92dc0d28be5871" #. When image changes, this message will be marked fuzzy or untranslated for you. #. It doesn't matter what you translate it to: it's not used at all. #: ../C/netspeed_applet.xml:185(None) msgid "@@image: 'figures/ethernet.png'; md5=48562a8b38e8eca91a3a8ee4ba4e3077" msgstr "@@image: 'figures/ethernet.png'; md5=48562a8b38e8eca91a3a8ee4ba4e3077" #. When image changes, this message will be marked fuzzy or untranslated for you. #. It doesn't matter what you translate it to: it's not used at all. #: ../C/netspeed_applet.xml:197(None) msgid "@@image: 'figures/ppp.png'; md5=b88d98a9ccdd489d91b45c8cf2dcbad1" msgstr "@@image: 'figures/ppp.png'; md5=b88d98a9ccdd489d91b45c8cf2dcbad1" #. When image changes, this message will be marked fuzzy or untranslated for you. #. It doesn't matter what you translate it to: it's not used at all. #: ../C/netspeed_applet.xml:209(None) msgid "@@image: 'figures/wavelan.png'; md5=90f925a64abe393adc5834fceba515fe" msgstr "@@image: 'figures/wavelan.png'; md5=90f925a64abe393adc5834fceba515fe" #. When image changes, this message will be marked fuzzy or untranslated for you. #. It doesn't matter what you translate it to: it's not used at all. #: ../C/netspeed_applet.xml:221(None) msgid "@@image: 'figures/plip.png'; md5=0761a22dfa7b0b56e41e020cd701db68" msgstr "@@image: 'figures/plip.png'; md5=0761a22dfa7b0b56e41e020cd701db68" #. When image changes, this message will be marked fuzzy or untranslated for you. #. It doesn't matter what you translate it to: it's not used at all. #: ../C/netspeed_applet.xml:249(None) msgid "@@image: 'figures/settings.png'; md5=219a6bc0e89cb9634d49025f9d3c6604" msgstr "@@image: 'figures/settings.png'; md5=219a6bc0e89cb9634d49025f9d3c6604" #. When image changes, this message will be marked fuzzy or untranslated for you. #. It doesn't matter what you translate it to: it's not used at all. #: ../C/netspeed_applet.xml:296(None) msgid "@@image: 'figures/details.png'; md5=60fedda8f88b634f16ab31090b5bdd67" msgstr "@@image: 'figures/details.png'; md5=60fedda8f88b634f16ab31090b5bdd67" #: ../C/netspeed_applet.xml:24(title) msgid "Netspeed Applet Manual V1.1" msgstr "Manuel de l'applet Netspeed v1.1" #: ../C/netspeed_applet.xml:26(para) msgid "" "Netspeed Applet is shows how much traffic occurs on a specified network " "device." msgstr "" "L'applet Netspeed permet d'afficher le volume du trafic sur un périphérique " "réseau donné." #: ../C/netspeed_applet.xml:29(year) ../C/netspeed_applet.xml:102(date) msgid "2002" msgstr "2002" #: ../C/netspeed_applet.xml:30(holder) msgid "Jörgen Scheibengruber" msgstr "Jörgen Scheibengruber" #: ../C/netspeed_applet.xml:41(publishername) msgid "GNOME Documentation Project" msgstr "Projet de documentation de GNOME" #: ../C/netspeed_applet.xml:2(para) msgid "" "Permission is granted to copy, distribute and/or modify this document under " "the terms of the GNU Free Documentation License (GFDL), Version 1.1 or any " "later version published by the Free Software Foundation with no Invariant " "Sections, no Front-Cover Texts, and no Back-Cover Texts. You can find a copy " "of the GFDL at this link or " "in the file COPYING-DOCS distributed with this manual." msgstr "" "Permission vous est donnée de copier, distribuer et/ou modifier ce document " "selon les termes de la Licence GNU Free Documentation License, Version 1.1 " "ou ultérieure publiée par la Free Software Foundation sans section " "inaltérable, sans texte de première page de couverture ni texte de dernière " "page de couverture. Vous trouverez un exemplaire de cette licence en suivant " "ce lien ou dans le fichier " "COPYING-DOCS fourni avec le présent manuel." #: ../C/netspeed_applet.xml:12(para) msgid "" "This manual is part of a collection of GNOME manuals distributed under the " "GFDL. If you want to distribute this manual separately from the collection, " "you can do so by adding a copy of the license to the manual, as described in " "section 6 of the license." msgstr "" "Ce manuel fait partie de la collection de manuels GNOME distribués selon les " "termes de la licence de documentation libre GNU. Si vous souhaitez " "distribuer ce manuel indépendamment de la collection, vous devez joindre un " "exemplaire de la licence au document, comme indiqué dans la section 6 de " "celle-ci." #: ../C/netspeed_applet.xml:19(para) msgid "" "Many of the names used by companies to distinguish their products and " "services are claimed as trademarks. Where those names appear in any GNOME " "documentation, and the members of the GNOME Documentation Project are made " "aware of those trademarks, then the names are in capital letters or initial " "capital letters." msgstr "" "La plupart des noms utilisés par les entreprises pour distinguer leurs " "produits et services sont des marques déposées. Lorsque ces noms " "apparaissent dans la documentation GNOME et que les membres du projet de " "Documentation GNOME sont informés de l'existence de ces marques déposées, " "soit ces noms entiers, soit leur première lettre est en majuscule." #: ../C/netspeed_applet.xml:35(para) msgid "" "DOCUMENT IS PROVIDED ON AN \"AS IS\" BASIS, WITHOUT WARRANTY OF ANY KIND, " "EITHER EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES THAT " "THE DOCUMENT OR MODIFIED VERSION OF THE DOCUMENT IS FREE OF DEFECTS " "MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE OR NON-INFRINGING. THE ENTIRE " "RISK AS TO THE QUALITY, ACCURACY, AND PERFORMANCE OF THE DOCUMENT OR " "MODIFIED VERSION OF THE DOCUMENT IS WITH YOU. SHOULD ANY DOCUMENT OR " "MODIFIED VERSION PROVE DEFECTIVE IN ANY RESPECT, YOU (NOT THE INITIAL " "WRITER, AUTHOR OR ANY CONTRIBUTOR) ASSUME THE COST OF ANY NECESSARY " "SERVICING, REPAIR OR CORRECTION. THIS DISCLAIMER OF WARRANTY CONSTITUTES AN " "ESSENTIAL PART OF THIS LICENSE. NO USE OF ANY DOCUMENT OR MODIFIED VERSION " "OF THE DOCUMENT IS AUTHORIZED HEREUNDER EXCEPT UNDER THIS DISCLAIMER; AND" msgstr "" "LE PRÉSENT DOCUMENT EST FOURNI « TEL QUEL », SANS AUCUNE GARANTIE, EXPRESSE " "OU IMPLICITE, Y COMPRIS, ET SANS LIMITATION, LES GARANTIES DE " "MARCHANDABILITÉ, D'ADÉQUATION À UN OBJECTIF PARTICULIER OU DE NON INFRACTION " "DU DOCUMENT OU DE SA VERSION MODIFIÉE. L'UTILISATEUR ASSUME TOUT RISQUE " "RELATIF À LA QUALITÉ, À LA PERTINENCE ET À LA PERFORMANCE DU DOCUMENT OU DE " "SA VERSION DE MISE À JOUR. SI LE DOCUMENT OU SA VERSION MODIFIÉE S'AVÉRAIT " "DÉFECTUEUSE, L'UTILISATEUR (ET NON LE RÉDACTEUR INITIAL, L'AUTEUR, NI TOUT " "AUTRE PARTICIPANT) ENDOSSERA LES COÛTS DE TOUTE INTERVENTION, RÉPARATION OU " "CORRECTION NÉCESSAIRE. CETTE DÉNÉGATION DE RESPONSABILITÉ CONSTITUE UNE " "PARTIE ESSENTIELLE DE CETTE LICENCE. AUCUNE UTILISATION DE CE DOCUMENT OU DE " "SA VERSION MODIFIÉE N'EST AUTORISÉE AUX TERMES DU PRÉSENT ACCORD, EXCEPTÉ " "SOUS CETTE DÉNÉGATION DE RESPONSABILITÉ ; " #: ../C/netspeed_applet.xml:55(para) msgid "" "UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, WHETHER IN TORT (INCLUDING " "NEGLIGENCE), CONTRACT, OR OTHERWISE, SHALL THE AUTHOR, INITIAL WRITER, ANY " "CONTRIBUTOR, OR ANY DISTRIBUTOR OF THE DOCUMENT OR MODIFIED VERSION OF THE " "DOCUMENT, OR ANY SUPPLIER OF ANY OF SUCH PARTIES, BE LIABLE TO ANY PERSON " "FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF " "ANY CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF GOODWILL, " "WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, OR ANY AND ALL OTHER DAMAGES " "OR LOSSES ARISING OUT OF OR RELATING TO USE OF THE DOCUMENT AND MODIFIED " "VERSIONS OF THE DOCUMENT, EVEN IF SUCH PARTY SHALL HAVE BEEN INFORMED OF THE " "POSSIBILITY OF SUCH DAMAGES." msgstr "" "EN AUCUNE CIRCONSTANCE ET SOUS AUCUNE INTERPRÉTATION DE LA LOI, QU'IL " "S'AGISSE D'UN DÉLIT CIVIL (Y COMPRIS LA NÉGLIGENCE), CONTRACTUEL OU AUTRE, " "L'AUTEUR, LE RÉDACTEUR INITIAL, TOUT PARTICIPANT OU TOUT DISTRIBUTEUR DE CE " "DOCUMENT OU DE SA VERSION MODIFIÉE, OU TOUT FOURNISSEUR DE L'UNE DE CES " "PARTIES NE POURRA ÊTRE TENU RESPONSABLE À L'ÉGARD DE QUICONQUE POUR TOUT " "DOMMAGE DIRECT, INDIRECT, PARTICULIER, OU ACCIDENTEL DE TOUT TYPE Y COMPRIS, " "SANS LIMITATION, LES DOMMAGES LIÉS À LA PERTE DE CLIENTÈLE, À UN ARRÊT DE " "TRAVAIL, À UNE DÉFAILLANCE OU UN MAUVAIS FONCTIONNEMENT INFORMATIQUE, OU À " "TOUT AUTRE DOMMAGE OU PERTE LIÉE À L'UTILISATION DU DOCUMENT ET DE SES " "VERSIONS MODIFIÉES, MÊME SI LADITE PARTIE A ÉTÉ INFORMÉE DE L'ÉVENTUALITÉ DE " "TELS DOMMAGES." #: ../C/netspeed_applet.xml:28(para) msgid "" "DOCUMENT AND MODIFIED VERSIONS OF THE DOCUMENT ARE PROVIDED UNDER THE TERMS " "OF THE GNU FREE DOCUMENTATION LICENSE WITH THE FURTHER UNDERSTANDING THAT: " "" msgstr "" "LE PRÉSENT DOCUMENT ET SES VERSIONS MODIFIÉES SONT FOURNIS SELON LES TERMES " "DE LA LICENCE DE DOCUMENTATION LIBRE GNU SACHANT QUE : " #: ../C/netspeed_applet.xml:48(firstname) #: ../C/netspeed_applet.xml:84(firstname) #: ../C/netspeed_applet.xml:104(firstname) msgid "Jörgen" msgstr "Jörgen" #: ../C/netspeed_applet.xml:49(surname) ../C/netspeed_applet.xml:85(surname) #: ../C/netspeed_applet.xml:105(surname) msgid "Scheibengruber" msgstr "Scheibengruber" #: ../C/netspeed_applet.xml:51(orgname) ../C/netspeed_applet.xml:60(orgname) msgid "GNOME Project" msgstr "Projet GNOME" #: ../C/netspeed_applet.xml:53(email) ../C/netspeed_applet.xml:86(email) #: ../C/netspeed_applet.xml:106(email) msgid "mfcn@gmx.de" msgstr "mfcn@gmx.de" #: ../C/netspeed_applet.xml:57(firstname) #: ../C/netspeed_applet.xml:94(firstname) msgid "Pedro" msgstr "Pedro" #: ../C/netspeed_applet.xml:58(surname) ../C/netspeed_applet.xml:95(surname) msgid "Villavicencio Garrido" msgstr "Villavicencio Garrido" #: ../C/netspeed_applet.xml:62(email) ../C/netspeed_applet.xml:96(email) msgid "pvillavi@gnome.org" msgstr "pvillavi@gnome.org" #: ../C/netspeed_applet.xml:81(revnumber) msgid "1.2" msgstr "1.2" #: ../C/netspeed_applet.xml:82(date) msgid "2006" msgstr "2006" #: ../C/netspeed_applet.xml:91(revnumber) msgid "1.1" msgstr "1.1" #: ../C/netspeed_applet.xml:92(date) msgid "2005" msgstr "2005" #: ../C/netspeed_applet.xml:101(revnumber) msgid "1.0" msgstr "1.0" #: ../C/netspeed_applet.xml:112(releaseinfo) msgid "This manual describes version 0.12 of Netspeed Applet." msgstr "Ce manuel documente la version 0.12 de l'applet Netspeed." #: ../C/netspeed_applet.xml:115(title) msgid "Feedback" msgstr "Votre avis" #: ../C/netspeed_applet.xml:116(para) msgid "" "To report a bug or make a suggestion regarding the Netspeed Applet applet or " "this manual, send a e-mail to Jörgen Scheibengruber." msgstr "" "Pour signaler une anomalie ou faire une suggestion concernant l'applet " "Netspeed ou le présent manuel, envoyez un " "courriel à Jörgen " "Scheibengruber." #: ../C/netspeed_applet.xml:122(primary) msgid "Netspeed Applet" msgstr "Applet Netspeed" #: ../C/netspeed_applet.xml:127(title) msgid "About Netspeed Applet" msgstr "À propos de l'applet Netspeed" #: ../C/netspeed_applet.xml:129(title) msgid "Netspeed" msgstr "Netspeed" #: ../C/netspeed_applet.xml:135(phrase) msgid "Netspeed." msgstr "Netspeed." #: ../C/netspeed_applet.xml:141(title) ../C/netspeed_applet.xml:147(phrase) msgid "Netspeed showing the sum in a 48px panel." msgstr "Netspeed affichant la somme dans un tableau de bord de 48 px." #: ../C/netspeed_applet.xml:152(para) msgid "" "Netspeed Applet displays the network traffic on a " "specified device like eth0, ppp0, plip0, etc. More over it provides " "information about the configuration of the network device." msgstr "" "Netspeed Applet affiche le trafic réseau sur un " "périphérique donné comme eth0, ppp0, plip0, etc. Il peut également donner " "davantage d'informations à propos de la configuration du périphérique réseau." #: ../C/netspeed_applet.xml:158(title) msgid "Netspeed Icons on Panel" msgstr "Icônes de Netspeed sur le tableau de bord" #: ../C/netspeed_applet.xml:165(para) msgid "Icon" msgstr "Icône" #: ../C/netspeed_applet.xml:166(para) msgid "Description" msgstr "Description" #: ../C/netspeed_applet.xml:175(phrase) msgid "Loopback" msgstr "Loopback" #: ../C/netspeed_applet.xml:178(para) msgid "The Loopback interface." msgstr "L'interface Loopback." #: ../C/netspeed_applet.xml:187(phrase) msgid "Ethernet" msgstr "Ethernet" #: ../C/netspeed_applet.xml:190(para) msgid "Ethernet connection." msgstr "Connexion Ethernet." #: ../C/netspeed_applet.xml:199(phrase) msgid "PPP" msgstr "PPP" #: ../C/netspeed_applet.xml:202(para) msgid "Point to Point Protocol connection." msgstr "Connexion PPP (protocole point à point)." #: ../C/netspeed_applet.xml:211(phrase) msgid "Wireless" msgstr "Sans fil" #: ../C/netspeed_applet.xml:214(para) msgid "Wireless connection." msgstr "Connexion sans fil." #: ../C/netspeed_applet.xml:223(phrase) msgid "PLIP" msgstr "PLIP" #: ../C/netspeed_applet.xml:226(para) msgid "Parallel Line Internet Protocol connection." msgstr "Connexion PLIP (Parallel Line Internet Protocol)." #: ../C/netspeed_applet.xml:235(title) msgid "To Add Netspeed to a Panel" msgstr "Ajout de Netspeed à un tableau de bord" #: ../C/netspeed_applet.xml:236(para) msgid "" "To add Netspeed Applet to a panel, right-click on " "the panel, then choose Add to PanelNetworkNetspeed Applet." msgstr "" "Pour ajouter Netspeed à un tableau de bord, " "cliquez avec le bouton droit sur celui-ci, puis choisissez " "Ajouter au tableau de bordSystème " "et matérielMoniteur réseau." #: ../C/netspeed_applet.xml:244(title) msgid "Settings" msgstr "Paramètres" #: ../C/netspeed_applet.xml:246(title) msgid "Netspeed Applet Settings" msgstr "Paramètres de l'applet Netspeed" #: ../C/netspeed_applet.xml:252(phrase) msgid "Netspeed Applet Settings." msgstr "Paramètres de l'applet Netspeed." #: ../C/netspeed_applet.xml:257(para) msgid "In this dialog you can change the settings of Netspeed Applet:" msgstr "" "Cette boîte de dialogue vous permet de modifier les paramètres de Netspeed :" #: ../C/netspeed_applet.xml:261(para) msgid "" "Network device: Choose the network device that the " "applet should monitor from the popdown list of the combobox. Usually all " "available devices are listed, however you can enter one yourself, too." msgstr "" "Périphérique réseau : choisissez le périphérique réseau " "que l'applet doit surveiller dans la liste déroulante. Habituellement, tous " "les périphériques disponibles sont listés, cependant vous pouvez aussi en " "ajouter un." #: ../C/netspeed_applet.xml:265(para) msgid "" "Update interval: Enter the time between two updates of " "the applet." msgstr "" "Intervalle de mise à jour : saisissez la durée entre " "deux mises à jour de l'applet." #: ../C/netspeed_applet.xml:268(para) msgid "" "Label font size: Enter the size of the text displayed " "in the applet." msgstr "" "Taille de la police pour le texte : saisissez la taille " "du texte affiché dans l'applet." #: ../C/netspeed_applet.xml:271(para) msgid "" "Show sum instead of in and out: If you check this box " "then the applet will show the sum of the in and out rate. The applet will " "take only half of the space in the panel in this case." msgstr "" "Afficher la somme à la place de rentrants & sortants : si vous cochez cette case, l'applet affiche la somme des taux de " "réception et d'émission. L'applet prend alors une place deux fois moins " "importante dans le tableau de bord." #: ../C/netspeed_applet.xml:275(para) msgid "" "Show bits/s (b/s) instead of bytes/s (B/s): Check this " "if you want the applet to display bits per second instead of bytes/s." msgstr "" "Afficher des bits au lieu d'octets : cochez cette case " "si vous souhaitez que l'applet affiche des bits par seconde à la place des " "octets/s." #: ../C/netspeed_applet.xml:279(para) msgid "" "Change icon according to the selected device: Usually " "the applet will show an icon representing the type of network device you " "monitor. So it will show a phone for Point to Point connections (ppp - " "modems, etc.), a network card for ethernet (eth), etc. When this is " "unchecked, the applet will always show the network card icon, no matter " "which device you monitor." msgstr "" "Changer l'icône selon le périphérique choisi : " "habituellement, l'applet affiche une icône correspondant au type de réseau " "que vous surveillez ; un téléphone pour une connexion point à point (modems " "PPP...), une carte réseau pour la connexion ethernet (eth), etc. Quand cette " "case n'est pas cochée, l'applet affiche toujours une icône représentant une " "carte réseau, quel que soit le périphérique surveillé." #: ../C/netspeed_applet.xml:285(para) msgid "" "Always monitor a connected device, if possible: When " "your connection is down, Netspeed Applet look for a running one for " "monitoring." msgstr "" "Toujours surveiller les périphériques connectés, si possible : quand votre connexion est inactive, Netspeed cherche une " "connexion active à surveiller." #: ../C/netspeed_applet.xml:291(title) ../C/netspeed_applet.xml:293(title) #: ../C/netspeed_applet.xml:299(phrase) msgid "The details dialog" msgstr "La boîte de dialogue des détails" #: ../C/netspeed_applet.xml:304(para) msgid "" "This dialog shows you some useful information on the configuration of your " "network device." msgstr "" "Cette boîte de dialogue affiche quelques informations utiles sur la " "configuration du périphérique réseau." #: ../C/netspeed_applet.xml:309(para) msgid "" "Internet Address: The IP (Internet Protocol) address of " "the network device." msgstr "" "Adresse IP : l'adresse IP (protocole Internet) du " "périphérique réseau." #: ../C/netspeed_applet.xml:312(para) msgid "" "Netmask: The netmask which depends on the size of your " "LAN (Local Area Network). A usual value is 255.255.255.0 (a class C network)." msgstr "" "Masque : le masque réseau dépend de la taille de votre " "LAN (réseau local). Une valeur courante est 255.255.255.0 (pour un réseau de " "classe C)." #: ../C/netspeed_applet.xml:316(para) msgid "" "Hardware Address: Often also referred to as the " "physical or MAC (Media Access Control) address. A worldwide unique " "identifier for your network card." msgstr "" "Adresse MAC : aussi définie comme l'adresse physique. " "Un identifiant mondial unique pour votre carte réseau." #: ../C/netspeed_applet.xml:320(para) msgid "" "P-t-P Address: The internet address of the \"other side" "\" of your PPP (Point to Point Protocol) connection." msgstr "" "Adresse P-t-P : l'adresse Internet de « l'autre côté » " "de votre connexion PPP (protocole point à point)." #: ../C/netspeed_applet.xml:324(para) msgid "" "Bytes in: The amount of bytes that the network device " "has received since it has been connected to the network." msgstr "" "Octets rentrants : la quantité d'octets que votre " "périphérique a reçu depuis qu'il est connecté au réseau." #: ../C/netspeed_applet.xml:328(para) msgid "" "Bytes out: The amout of bytes that the network device " "has sent since it has been connected to the network." msgstr "" "Octets sortants : la quantité d'octets que votre " "périphérique a envoyé depuis qu'il est connecté au réseau." #. Put one translator per line, in the form of NAME , YEAR1, YEAR2. #: ../C/netspeed_applet.xml:0(None) msgid "translator-credits" msgstr "" "Franck Charpentier , 2008\n" "Frédéric Péters , 2008\n" "Claude Paroz , 2008" netspeed_applet-0.16/help/de/0000755000175000017500000000000011402462050013127 500000000000000netspeed_applet-0.16/help/de/figures/0000755000175000017500000000000011402462050014573 500000000000000netspeed_applet-0.16/help/de/figures/settings.png0000644000175000017500000003347511402462050017075 00000000000000PNG  IHDRH+ʰbKGD pHYs  /"tIME 6,s IDATx}lYɊl#+Rcuu-9Zeu_VM\Z' 9:`.T0 ]A#8#Jvf݌FR1=~ ~v{^yUf 6LuujC//^JYBdݕbP.^JVArReH]ZMMMY/8n+KΝ9muZu Ͼ`_̛է^U_nz~z³\ K{^q1K=r}e%qd\ߢ{4;௭bs]CW u*'wDSX}϶YU⯇m5#ק-5IO@u㪡n{.޳dIdUUȺ/l=BQ>iJj] ?HM> Hڶ_0{,MRa% }PUM; 4jf 86CU\q )\SG?϶W~ c. V-d`jz*Z~65[?$IǤcBD>v0lsˆ:QyO ĖY}R/_Zyޚ<\72חC u)[{gCr B$pjkO..v ١V$(*";wM |YW}K K{&)Tq..SMM'R?P[;$;E*D(OBJu550rGS,fqn]hm:j9/dlM3 K?<'=D^ߢ[Tvۮn~Րxf>g "ՐeW$hjgWo h4j!w.>{$|գeR ZfRIz,; D^R6y%sU 6TWnc#V%,)wyl.ġf7Tܛí? /)Tr2)R$'zț.;Pn5&`fnAQ,l$J+XԿ?5/[ ~xWaK\JfP\E505Pݦ]lD޾DZ#YVec، PbJMU_$OinaمY> [cO&'G;?+Bei-*UP9V{nKͯkXR,~UIZmajӪhk]palEZ_\̛ Ƽ? [x-p,KަQ()Zq=V }jW%j|O P|T:_*edyPVJ2o `YcS՛h%Jk/MvUY.Dl6`oyv뮗}We@ 8~IpSM[lx4y8u)Uj}^X5RC 4-'ߗ~|%*@VW]8zUc|/_  ]f2-a;V[8qv%K8 ^ iJbޤ͘Th 6 2G[;f^ӘSp=V 0Ѹ=b]o/9bxdnWkU5q:CW͡+9 8jzzZnQY˗@ ]fP(96ζoyUCd /\vrm^2R6_3&BS/+&#e}+sto6Vxi8=B1ݑTna_rDΩ*gגdn~AdYe KӭMH2_ j+9VѦS<ڜm%3(.JrZ[Ҽ! D92Kb+L0IM,Roe$SQ*ObY+55$45=TX,vX؛D}STeShkyH=ӲscrC@+Yx)\&A.Ჩa^B. X^MY7rƉ dN%]tP 6666666Ȑ5ښG1#YɷyJe)ܜl$ Hp)$ɔbz`]󮑛#:CfY9ړ|T~l'yGx4 ?om3x1r;|}fSkR5Z!8:m]bDu *걻 щGㅽRD#d} 3ܪ|J'ܶ7d}=FUbFБߒ=zxeԿVO\}1Ϻt*jZVtjZ>l8v3m(f.Wvwgkz%8.ǖeQA$;;:C4Qt*|py\2&}8zjᾊ\?+ˆpDK3*OA6;{dp}JH.**<{ !8a<' wD͢P(ODžG]Kߡ9K<9y됭ml#!(l!(l!(l!]Nm@aլ&*yǀ>Ƽ uϐA矽I W5j^*6J}SKBlkHaEj zVؖ=fksYoLM7lҩo&O'Jmvv@ީ22.ױSS4\Wsv{Vr쏔XɤR!jRR}#o0UJSϲ66/y}ҽ\u#"I3LKt6gںjm / PάEW36GFGwho;8n1sS_o6'&rw3&.q=잝cz݁Oa7I/ѐ$/,:;=ɧIqpOG_2;@|-(5HwO?]_O/1X9Vl|:~{w~)W2+S,{,BM 7il |㛄/MKUӷt].|y9²l~~"m$x<·[<N-V7Ӥw v HZҌERTϱk|g|_'.N̾gW6uPh$4w[[yvpZl &IIwμp_?o=m2vQDRV(\t8lmq aF+%jaGwWwVu5x)0L"SSy:-VSU I1w9Zr;ZXxo3>sџ|x9ZR˵ra' mVRz:4IQK'sgU[y嫓&9b޴۵3^m~X~Bj!Iv.;~D#D5ՈS$F.hىljw1<P,T~kbE wʠll{Mmyik"|u*)>*oٖ@ZcAoiϱPak\+w_P3פxKĦOMJsGKj Kj=tybc^x7>/$)zG72xybcDeē ޶&$;L:,0Z1W2OoJ5yr\O?mm}%TTSS? Z˱O-65. pYxП;sNTb"(q\NnȰ H)ģDtCC+s:!5|}eYvI Ei"/iI۵(q؞_.8GTJ]`)fXZ{Zr?ȕLLd^ڻd\/.ױ|g [S E|<آXn:]RS's5%jaC%KBOG\=-%TbW }n*rT(ZF_W~niח.12;{/~n1[&,n*4Ym~O<{ڛJ,fKv"%}lQK?t=d4w³3zY8s>NӖ&KgG'(moeUls%%JO }OUQϻ\b{ G钚zIM:mS%Ks 640.8VbWLIM,\,~K?@" hS֘X,v@4\᯻RB]YԆ? ceme dȦPoCbMdxcl%(췚uV2{ eVΐb2pYF "CP"CP"CP"CP"CP"CP"CP"CP"CP"CP"CP"CP"CP"CP"CP"CP"CP"CV5RNJC c{=v@g řx"}rYsUrbϛoaJm_ǎӕǙ~ $' urQxb*cOd*}!eSֽ҇fd5h{$a͑_n ]Om3~T*ڼ~󙚞2\~XO/57A64d |?>ؚ$QlxQbxoSee%4; ;˲^v@_9yة5[ bXuʆyء_yB((FjP^ t91ॠpMߥqѸӘȟ[=`cMƑ!`44 iGÖ&AU`Tj٢Y,Ѣ'<'R=`;0^oo3 #406s#VѼUH]B8{ɑ`ke[a)IV}^io,,L:x)=n[->OOZmI7ē qwal'wH/]mꕫ Cr/cC. ׾>f&0/^H ##?x>X=KdjzjP\06M$w.oPa\^R$<8(2TIX,F6|UOͻ'q> V#ш~yp7r}ʷa<>%]Ņy_{JN9 ] ?6+)%KZ7< eYOgbBpLk36?OnkK@Kj,HA&끢([+kOy嫓&9㸼tFR4n3bQ>kېd}vN17A>/4.*WUg_ h)q?/[XhO~fK7&\}hi3&l.ùܮ/]bd`q!q+>W(<,J$EJ7e-M3E&$Sgg.BoЗHƵ: :r}VVx*y !I2ݟN=KgXp|yyJ&W EǔZ]EQGz>l([z~Z^vABי 06s#*x%. xNzjwhãaPRׇYeXO_~ 'GFG _ԔN$q EiPeFRP$%JG\/fyJ9OT4 6D}HI*IlJڦ>/3/ǿ/6"I>J H啒b"(W|iw}%a9 9 w:4Y:;:es }Zx<{O{Sli?NQmwK]`46'N CX̖]/kO~!lqtT38pmv(gGbsx:JHKdix&=7S>b~bnɯbY+ƆY, ^nA֙z4L*W;^3-Mf>tאb+og*aoˑkB ȚFFFFFFFFFF 3IDATFFFFFFFFFFF@A^=0,?fd ,`(XҧTN/ 8y\j޲Ip 鞣Qz,C{W(͆[tJ8[/\huuIhRb +3 Qls(SI67T[Uݟw>WRb:;D?jk(kʆ [\+#7GJ 9mo ^e{P( &CAԶ%n^V|trYq=򶥞y.bºJߧWVƯ'%,87-{,ɧIQx^,plSș9yة5[ ;R_GÖ&A/'j;acQߠ}M&& .?;{rw$RZ,/EW3Ѱ`4C F}Hoa6\oSre94m.?Xs'kcou6pN<46-1R A6'IH&Ͷ "Yz+< 둷}Ɋm+m>6',L:x)=n[->OOZmI7Sē qwa8:ʭJeŷ';6׾i?_|7݈< * L28.@ºI_AhiQ;:| 8.|'rQ̧V<4pcjBݮ %U,Ēqi ? DyW:hm E$s*M0<1 |Xl}W;J).g^-[~kbE wFׄ?QMt~id<2dXr4vq޸v-Cpw^, |,l3w5RecaYض#=C׆$ܮ XZs( a˺a=6}nח.D20dO:q\lxl *Aۊ<705'%x7tybƢC BNhs7>i8b,",_2<44BBe8 ^؊).牟JEUldz&|df\ߘOe$",z Oے?f*6ux4ը s.$fRƢBңXo˧X=aԖ1!'6mU%ǪIZ0a06 2 9ɻݡ 9C}H _fYc=}Aİ lې}mJJU{Jjv}5b 3 !%٣jkS%q\J.1iFnN)@:D[HTlUб2ÆγSRgm[R 1V0q#7Gf-p+Ajmw׺UpYЕ _\B=)\zl ] eWj ̵sqS -UaC#ϵa=4YT*U?䏻\}.Q`}m1[T*Uݒ,zG벷ىj">I- qdR)K 5P &G @~Լ,2*E%~^%HK^;şK@%eۺ⥋-9yOx{ ^jkv Dԇlnrne jWNKr=56yI FBj[08՘ԚW:NmxrqúQ>bUcXwWcX,=&lhlx_b59Q5y+ƫs_+ ˲ퟴ=%<N=Oղ\ּ+[Zm÷=vi=L&^Wr4Y9_GT~P;O1h]焧z˪|g|ݽݨjb+d8====u r(n2;ȲVXe Ζ[E^^ GظTYsP"CP"CP"CP"CP"CP"CP"CP"CP"CP"CP"CP"CP"CP"CP"CP"CP"CP"CP"CP"CP"CV;Aj pvK-?fd ,`(X'Bn"("$3(\˕5Ǯr(z::^_7_O'\|l +/KlM648#hxY m/kvUUxO9[kjz*>}Ok ?g%xql??m9 8Y{a>PTp} ~-{,:82:»A{l97@"co6;07].x!hl2 FFα^w9Guv=Ӥogi4KAI~h0JwJdGDߡ\;8sw8yGfqvu{,MncX}c934 ,Mq[y"ϪJB]qѲ"Z G whcSAH !>V}NnkDŽg/驡CsY|7FnDF*9jwڧj˃gOƩ]x(V1;瓈ON<>ᶵOS^tC]y⅋20烅@$ibڐdkC!k V?280'&'ܧ`whJ5<:.jZl@4#t4R8Ü/)*u$/Ԛ䳤k1@n)E絊0DF?m- |Zgsڒ)6 ˕kem b?Zс\~>0 NI۵3^cPL=Ϛn&K.ăWHOa (2\I|%ٮ>ׅlyy)N ] şC!d\2k[4urd] ۤmLl=]>8?Y%IBx_6 \ϩ(.q32|3q Rv-}8. )dXa<';JX|T)TQQP$&8 MPCC\zkݡ ':>̲,;z&iPg`9t3),ҨT*a J}HnY%;HJڟbp Ih,Zx7?f2\JDZ6ɷlƋg6I#74f]~!lqRJ,M{P?E7(aiju^:Fw)Onc\ppiK|gnGCߤ7JW=%={rrj?|sXߠB=MRP;IeMRoS@X[@6b"ɫqB].!>N&JE?2:bl2t>O]%CfW~Ȯߩ̗`LXU˩ק{URi%ImdKŠGv{:5$b]ݒ_b1gW( /oF6z4L*Wxڒcs 4Y9{j%m2ބXJ#0&6&666666Ȑc/JA7^;YC M Aesl!(l!(l!(l!(l! BG(|'-!l|q c# Aa# Aa# Aa# YCd m o:eWQț)A%PA6~?FFFFFFFF6={Q" ^z{@a#rGz&-tcj{@a#^+#bt+~KޘAa#MftѰ;J~vqƝޯz+T]o=G=]?,F3OCc!Gz !>D#m\ g fYo̯#b ]T 陴u b A6Cxwvw@"/` ׿0gYqء[XOS.|6i|t%RY(lD$%v{-lk=LiANv|T)#ш?+>ᶵOS^IOS^7x>}-M句R6IϤ_kTbuxGgmt")vVE>k#BR AQ308{Wߠwt:KUHgIeIlT*ۧ6`YdX72+O- ɻ Wd`Xv{lds{G=V Ӑp⅋$qGߥ$N}Dwi9hofPQ+!veӗ%?%|mK(ldrkj%,{ee\ Fcqk?=MNӖ&KgG'HoosgK|OJETtj: O<+F,sv;%ߟ=AH~FVv76d٤"CP"CP"CP"CP"CP"CuR!U$(lMCHYPtjZNߊl8FFFFFFu~ 'l AdC5m% ;'ޘYIENDB`netspeed_applet-0.16/help/de/figures/details.png0000644000175000017500000002327211402462050016654 00000000000000PNG  IHDRebKGD pHYs  /"tIME 8). IDATxqH[Y(o\GA]0tLKl ]X>Ƙ.2Fa[cƂU >63lGScR 3v B.oyx+q27&FkҪl<ܓoNN@!T˗!mG5}|}ףBmMoP(%8S(eBh{hkpA^%˲2Ov/mv7ځV\BY""ݫzsWM*<^h9?naZviaZ/_d;,]{sħ ޳+vvk_ŅiLj[}9m?۵o>0zS칢W-]b/ZM`v΢+Ͼ0hLۅJoLd̞{EoOϘ]0kޖ5>7UV<F siVxoRF>p~50̷bP+= Jd߉_iAW Ӄm *g^KÃJ]zoX]x wݵ'0HO[Kk?M<쿡[iI]ϧcy}WA^ucH󶼶66g"--v;*칸WvA=|ǯ)<TJH䡾P*.Bk4 È[/+@X(]<̔@XO:E;NV Q҉|7h@٧b1--2NRRTO[s|4-upl?ol|~Rer,6+5jYS1L'R[ȒlG.v^ ƴ?X'KYZ&K$ 0ʽ*,ק-6;N/a,ABBqDκ~-ƝH&LO`aqa XWjJ>a whxg.!˲=ާ + Cs"%;̳D%+W(jpyB\T@ )|yJKAoR@Ywy%l/[T\?)&.e|~YRZE\j5{Yg.Ш兿/.\H *mrT>T؏1U_y[S2d m08{#+$C@ruAr?Y!2d.q|nu+(kW6r5Hb[{)JBE/ly  !d w%qT_DXCAPPğ3y_ Ey,G cw!cc+7Bhm$VUUx{wFxju9?vһxxhko29]N{P.4ܧO ƴ=X,Vm>[ճCl=t6;#"CH$ܶLjB.7 If|B|B;V8IC+ڻBmpBH0"P`E"BE!.B \*쥰dۊ p95I[gZ/1nͳ7 !$,f<=yFW1ׄwF9.jSx uV]Zom{5d>(zhsMAr!DdXph4z  ]{ѧ̖jFkNOlMFm6q팍f? oz9Voݜ9ӆ䌬R` \hom7J^̑05*uslNCZn>5p L*M%v eꕲL5_;3 Ԟ G62/T{U=Qd"yɔs# 1EPNLNG;9h'SO`&mB'=!ٲLg2 !UT+>ӻXoXff_xBթ.WNMDнۙ 8v vB>HbcȐPBUo/9je|,~u~GS1]]nB!>5Y"#wFڛۿB!Ff?ߗlu7VKL{T51g!+)a aqdn0q4S)AO8`Yvxpx*<*%0k]LLGkuUI(UDz#E uğg3햩hf̎Le8b=".=x·w^׈Ho>a MBa$y>f6wLλLLB\0&ݲ3u "Y!V]$kIU|̜Wad &WPS} Rx/>"xg2,(t`Bo'lo2767.XVKjW+>ϳ2#+$p7@k@J!;!>j ᵜIr$o Ug3"S:/wz=V7ytsȪ ]ͮ8Y![~pG{BFn_?~ei{s;IԒl_T^ z'+/~+, z::+ !4Dj[M N!CDۅ6kT=݌P3l[.k" @Wgך?Fr2Xhvad|7}9S4C}Ҿ$dF}4Io5ڌcisYb9UzzS#$ϳWJ]Z5E#Q].6xoB 3> Л.B \* !T$pBH0"P`E"BE!.B \*p_T'z46yZB3oV "8=սW{^ǵ4DElϕ}lFvr gڳzle{d;[@Ldau:69jmؖm5궱ãh^^Bqzfe6LdUk.qyY)Gluٹ٩YHj3Ӧcl@̫3$DF10L)$7ffx45BxU8#}EsbUFHȒ_^o/P~I~KnJ.U&5[5"ٚdE0000O_Mn a,--KT/a4d˻%yUsRW+ǘ&NGiZ ?o(|d)5ͼR͖}brb١!M eop'3<2, ȂAi>qԼL"#䓩Oz VN;tk%We7rivfӹ $13^sjJ9,dL>43[Y&|%gKl읙T:!w]?]U1sT1J;[;syowhph( R 3͂Agy-?nΒ͕1vy$(?ƽWyqNBR`ۨ/aĹTjUb){|}UUU½BǑ"㨐R%O=КL+/,Sz?/p2f旔^GK #,Y8^Z 4 biTWI/LDz+>-A2 þzxz#gޥhFX/ >FirLG>JaG)ݟv %ΒXTXWvY{){VQh+?̬.WGBeT]MBLv\KNL8{~2^uЃȝ/_В`AdvS2̥0{q:BAkf~yu^d2̅G?G )_B@Q+ei]CU Ҁ(1YQ Ht 쵱H_y^ͪe{dPvdtV@QV>{,~e3"Wȅ6ٷYL+#a,o'8g<{zk*Scs'J÷yMg8l^Wڙl}[~!ca05SFK~5BS$N&N 6nnܑ뒼aUz~sf|Jft |rڲ*k!WvhpTcemmcwttǩuqU Bj7؍G9ǍG{0_$KJ='_`*ZJGK6W-Vm6e(|[Q$wG![_iT0t)h+H$G.<[m GuZd2uzZrx󔼪2Uݯ MB~fAM(gA5YP8Yd1,:Z|o'D!^&D7 \* !T$pBH0"P`E"BE!.B \* !T$' Bo\!Cj!{M7|zddռW#?XfLsUlAW{ijB|}?ПVqglgVe6pkuH_\ּ_|fK dyfmp4#XZ&SȞ;5vntsd[Tl ;c@nBI*O~n5L& ~EiYkme{dB¨40qIˉU!Rړgٓg!3;=32j5ZmjٓgyH;saC|;ۇ&048ģT, ;c@n’!$0h9?f[ \~n)-?S8]l"%A29AxrK/vut/i>Awr7I~r)dt"/9L=s3/~aNE%?Teh@O-3n7I ԝKUJ KR:'CsLJ O=Jk9`(O6JԶpI,:{ړB8ުfaUKfۢks2UYՑT#a hy46Uۦ&did2Tx*-9,M,'-]]YzMY""2ҫ?k^ M8w6;d,أY(LD\O(=l28B2S( Flm? _iHQaBB`*54.3d}TV(%?uGu2!]cMGL]%]wD;IDAT'Ӟw;|}U8710% jNli:J3ǹ`M&{VNSˆ cXjaE&9JmY$@y<;VnY:Hno( YˏϬFn8 3{D!E5Ч_Sl!x5ri쥀Bo8 !T$pBH0"P`E"BE!.B \* !T$pBHK+t?Bh[;65JA!^ku턋B(\E"BE!.B \*_)B!<xB.7xBk!T$pBH0"P`E"k{Fj oٹ`E˗ o]vy \:F%95\z%\ u:z׵w˗/bsP(_"hixyB!G|iFC+=gu_,PpBv^ u.3\P .BYGBGwWN8E\>3;APhCCQx.BٙxZh: [jSu`<.Bh٩TtV -Ľ]NWs5_ ѽ-#ٙoOץ"e€Z/w~?=no#sggfNo*zx=7M c1^-m7Z'1 P(?az=gk0mBgWW, َ}pq?\кi55cM__q/xB{_j_X\hIB<-' L N?fvK%J^Gfu.Bh֌2 STe'Y`<B ,-R p+~}7}d|{k{ڽ ϑ.Br]:^-/ G k>!1 \O$1z[x.{֟e.]ڶ9~p?\\Ez._\o9pBVxVI*8" MupB3\ g}w? C , !T(Puwa€Z\}׮]^w6"?{u8E"BE!.B \* !T$~! 'pq#*;׼ B!?aB4`IENDB`netspeed_applet-0.16/help/de/figures/eth_sum_48.png0000644000175000017500000000256411402462050017207 00000000000000PNG  IHDR84P&l2bKGD pHYs  +tIME  uGIDATxAhV?3^!r! L:d-EN ѺA8 ZԴ-N uˢaeCU=t ITFm PZJ:KJ.G{}=ّ6ȱ p8Zq16,vcvZKrRbaߚw⥞9}MJy?ՖUXÖgUut盛{^_4~\ь0lj-\M`MS¶43se=)S&12Lv4Jn4w{NO@d~|$cաԖ6P񒈟a큖͛O¯QnVoon3h[ u)|4iWsǻcAiM>ؔd}cDLTS(Fu^Ʒd%󑙹"[=>/b]Rvd+wC6-lt[`G> zQ4-!)X2a.l- =7 W QzD"'ьaeYۦrUSZ'ǃ(kڭjڭjVtU JrV,ʶoԑoK:)\VTu , ^fQuRq>KiZZoOooOoٗ0!t50 ga GQYb;ٚ F;ЫVk\7G4B(^^Z x,>vaҨ/ |lI蹨Y8OnYr9@*mE5(w~-E O/ \7GFAD܂L*ѡh&q\ZcG<+/ӹJ~x؈2 :IW 5v7?5j-0B(r2Sc!?;MDlE5*؅g2\7r EQn '⤘ħsUEȉ,'p@RBKJ„L%-cJ%큖LVQ@{:X5V 1V 1V\.WD"Xi30M7l7k Wu^-s -YN [7}1~%=a ϙh>eX4=<aԄ PǗ嶎z2֪,O,L7loRuB#'#vqlFRbviސmrd"IENDB`netspeed_applet-0.16/help/de/netspeed_applet.xml0000644000175000017500000003415411402462045016760 00000000000000 ]>
Netzmonitor-Applet-Handbuch V1.0 Das Netzmonitor-Applet zeigt den Netzwerkverkehr auf einem bestimmten Netzwerkgerät an. 2002 Jörgen Scheibengruber 2009Mario Blättermann (mariobl@gnome.org) GNOME-Dokumentationsprojekt Das vorliegende Dokument kann gemäß den Bedingungen der GNU Free Documentation License (GFDL), Version 1.1 oder jeder späteren, von der Free Software Foundation veröffentlichten Version ohne unveränderbare Abschnitte sowie ohne Texte auf dem vorderen und hinteren Buchdeckel kopiert, verteilt und/oder modifiziert werden. Eine Kopie der GFDL finden Sie unter diesem Link oder in der mit diesem Handbuch gelieferten Datei COPYING-DOCS. Das vorliegende Handbuch ist Teil einer Reihe von GNOME-Handbüchern, die unter der GFDL verteilt werden. Wenn Sie dieses Handbuch separat verteilen möchten, können Sie dies tun, indem Sie dem Handbuch eine Kopie der Lizenz, wie in Abschnitt 6 der Lizenz beschrieben, hinzufügen. Bei vielen der von Firmen zur Unterscheidung ihrer Produkte und Dienstleistungen verwendeten Namen handelt es sich um Marken. An den Stellen, an denen derartige Namen in einer GNOME-Dokumentation vorkommen und wenn die Mitglieder des GNOME-Dokumentationsprojekts über diese Marken informiert wurden, sind die Namen in Großbuchstaben oder mit großen Anfangsbuchstaben geschrieben. DAS DOKUMENT UND MODIFIZIERTE VERSIONEN DES DOKUMENTS WERDEN GEMÄSS DEN BEDINGUNGEN DER GNU FREE DOCUMENTATION LICENSE MIT DER FOLGENDEN VEREINBARUNG BEREITGESTELLT: DAS DOKUMENT WIRD »WIE VORLIEGEND« GELIEFERT, OHNE JEGLICHE GEWÄHRLEISTUNG, WEDER AUSDRÜCKLICH NOCH STILLSCHWEIGEND, EINSCHLIESSLICH, ABER NICHT BESCHRÄNKT AUF, GEWÄHRLEISTUNGEN, DASS DAS DOKUMENT ODER EINE MODIFIZIERTE VERSION DES DOKUMENTS FREI VON HANDELSÜBLICHEN FEHLERN UND FÜR EINEN BESTIMMTEN ZWECK GEEIGNET IST UND KEINE RECHTE DRITTER VERLETZT. JEGLICHES RISIKO IN BEZUG AUF DIE QUALITÄT, GENAUIGKEIT UND LEISTUNG DES DOKUMENTS ODER EINER MODIFIZIERTEN VERSION DES DOKUMENTS TRAGEN SIE. SOLLTE SICH EIN DOKUMENT ODER EINE MODIFIZIERTE VERSION DAVON IN IRGENDEINER WEISE ALS FEHLERHAFT ERWEISEN, TRAGEN SIE (NICHT DER URSPRÜNGLICHE VERFASSER, AUTOR ODER EIN MITWIRKENDER) DIE KOSTEN FÜR JEGLICHE ERFORDERLICHE SERVICE-, REPARATUR- UND KORREKTURMASSNAHMEN: DIESE BESCHRÄNKUNG DER GEWÄHRLEISTUNG IST WESENTLICHER BESTANDTEIL DIESER LIZENZ. JEDE VERWENDUNG EINES DOKUMENTS ODER EINER MODIFIZIERTEN VERSION DES DOKUMENTS UNTERLIEGT DIESER BESCHRÄNKUNG; UND UNTER KEINEN UMSTÄNDEN UND GEMÄSS KEINER RECHTSLEHRE, WEDER AUFGRUND VON UNERLAUBTEN HANDLUNGEN (EINSCHLIESSLICH FAHRLÄSSIGKEIT), VERTRÄGEN ODER SONSTIGEM, KANN DER AUTOR, DER URSPRÜNGLICHE VERFASSER, EIN MITWIRKENDER ODER EIN VERTEILER DES DOKUMENTS ODER EINER MODIFIZIERTEN VERSION DES DOKUMENTS ODER EIN LIEFERANT EINER DIESER PARTEIEN VON EINER PERSON FÜR DIREKTE, INDIREKTE, BESONDERE, ZUFÄLLIGE ODER ALS FOLGE AUFGETRETENE SCHÄDEN IRGENDEINER ART, EINSCHLIESSLICH, ABER NICHT BESCHRÄNKT AUF, SCHÄDEN DURCH GESCHÄFTSWERTVERLUSTE, ARBEITSAUSFÄLLE, COMPUTERAUSFÄLLE ODER FUNKTIONSSTÖRUNGEN ODER JEGLICHE ANDERE SCHÄDEN ODER VERLUSTE, DIE DURCH ODER IM ZUSAMMENHANG MIT DER VERWENDUNG DES DOKUMENTS ODER EINER MODIFIZIERTEN VERSION DES DOKUMENTS ENTSTANDEN SIND, SELBST WENN DIESE PARTEI ÜBER MÖGLICHE SCHÄDEN INFORMIERT WORDEN SEIN SOLLTE, HAFTBAR GEMACHT WERDEN. Jörgen Scheibengruber GNOME-Projekt mfcn@gmx.de Pedro Villavicencio Garrido GNOME-Projekt pvillavi@gnome.org 1.2 2006 Jörgen Scheibengruber mfcn@gmx.de 1.1 2005 Pedro Villavicencio Garrido pvillavi@gnome.org 1.0 2002 Jörgen Scheibengruber mfcn@gmx.de Dieses Handbuch beschreibt Version 0.6 des Netzmonitor-Applets. Feedback Für Bugreports oder Verbesserungsvorschläge zum Netzmonitor Applet oder diesem Handbuch bitte eine E-mail an Jörgen Scheibengruber schicken. Netzmonitor-Applet Info zum Netzmonitor-Applet
Netspeed Netspeed.
Netspeed zeigt die Summe in einem 48 Pixel breiten Panel an. Netspeed zeigt die Summe in einem 48 Pixel breiten Panel an.
Das Netzmonitor-Applet zeigt den Verkehr auf einem Netzwerkgerät wie eth0, ppp0, plip0, etc. an. Außerdem bietet es Informationen zur Konfiguration des Netzwerkgeräts. Netzwerkgeschwindigkeits-Symbole im Panel Symbol Beschreibung Loopback Die Loopback-Schnittstelle. Ethernet Ethernetverbindung. PPP Verbindung mittels Point to Point Protocol. Wireless Wireless connection. PLIP Verbindung mittels Parallel Line Internet Protocol. Das Netzmonitor-Applet zum Panel hinzufügen Um das Netzmonitor-Applet zum Panel hinzuzufügen, klicken Sie mit der rechten Maustaste auf das Panel und wählen Zum Panel hinzufügenInternetNetzmonitor-Applet. Einstellungen
Netzmonitor-Applet-Einstellungen Netzmonitor-Applet-Einstellungen.
In diesem Dialog können Sie die Einstellungen des Netzmonitor-Applets ändern: Netzwerkgerät: Wählen Sie aus der Liste das Netzwerkgerät, welches das Applet anzeigen soll aus. Normalerweise werden alle verfügbaren Geräte angezeigt, aber Sie können auch ein beliebiges eingeben. Aktualisierungsintervall: Bestimmen Sie die Anzahl der Millisekunden, die zwischen zwei Aktualisierungen vergehen soll. Label font size: Enter the size of the text displayed in the applet. Zeige die Summe anstelle von Rein und Raus: Wenn Sie diese Box anwählen, zeigt das Applet die Summe der Bytes anstatt von rein- und rausgehenden Bytes. Dadurch braucht das Applet nur halb so viel Platz im Panel. Zeige Bits/s (b/s) anstelle von Bytes/s (B/s): Wählen Sie diese Box aus, wenn Sie möchten, dass das Applet Bits statt Bytes pro Sekunde anzeigt. Das Icon dem ausgewählten Gerät anpassen: Normalerweise zeigt das Applet ein Icon, dass dem ausgewählten Gerät entspricht (ein Telefon für peer-to-peer/ Modem Verbindungen, eine Netzwerkkarte für Ethernet, etc.). Wenn diese Box abgewählt ist, zeigt das Applet immer eine Netzwerkkarte, unabhängig vom ausgewählten Gerät. Always monitor a connected device, if possible: When your connection is down, Netzmonitor Applet look for a running one for monitoring. Der Details-Dialog
Der Details-Dialog Der Details-Dialog
Dieser Dialog zeigt nützliche Informationen zur Konfiguration des Netzwerkgerätes an. Internetadresse: Die IP-Adresse (internet protocol) des Netzwerkgeräts. Netzmaske: Die Netzmaske hängt von der Größe des lokalen Netzes (LAN) ab. Ein üblicher Wert ist 255.255.255.0 (entspricht einem Klasse C Netzwerk). Hardwareadresse: Diese wird oft auch MAC-Adresse (Media Access Control) genannt. Eine weltweit eindeutige Identifikationsnummer ihrer Netzwerkkarte (nur bei Ethernet-Netzwerkkarten).. P-t-P Adresse: Die Internetadresse der "anderen Seite" Ihrer ppp-Verbindung (peer-to-peer protocol). Bytes rein: Die Anzahl der Bytes die das Gerät empfangen hat, seit es mit dem Netzwerk verbunden wurde. Bytes raus: Die Anzahl der Bytes die das Gerät gesendet hat, seit es mit dem Netzwerk verbunden wurde.
netspeed_applet-0.16/help/de/de.po0000644000175000017500000005047011402462046014012 00000000000000# German translation of the netspeed manual. # Mario Blättermann , 2009. # msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "POT-Creation-Date: 2009-04-17 15:40+0000\n" "PO-Revision-Date: 2009-04-18 15:16+0100\n" "Last-Translator: Mario Blättermann \n" "Language-Team: German \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #. When image changes, this message will be marked fuzzy or untranslated for you. #. It doesn't matter what you translate it to: it's not used at all. #: C/netspeed_applet.xml:132(None) msgid "@@image: 'figures/netspeed_applet.png'; md5=11ef0533a2be1a5d1a9de77c4cec7f93" msgstr "translated" #. When image changes, this message will be marked fuzzy or untranslated for you. #. It doesn't matter what you translate it to: it's not used at all. #: C/netspeed_applet.xml:144(None) msgid "@@image: 'figures/eth_sum_48.png'; md5=5113ce28da9b7712dafc52b3c13ccf32" msgstr "translated" #. When image changes, this message will be marked fuzzy or untranslated for you. #. It doesn't matter what you translate it to: it's not used at all. #: C/netspeed_applet.xml:173(None) msgid "@@image: 'figures/loopback.png'; md5=0636b7d65b0626ee5e92dc0d28be5871" msgstr "translated" #. When image changes, this message will be marked fuzzy or untranslated for you. #. It doesn't matter what you translate it to: it's not used at all. #: C/netspeed_applet.xml:185(None) msgid "@@image: 'figures/ethernet.png'; md5=48562a8b38e8eca91a3a8ee4ba4e3077" msgstr "translated" #. When image changes, this message will be marked fuzzy or untranslated for you. #. It doesn't matter what you translate it to: it's not used at all. #: C/netspeed_applet.xml:197(None) msgid "@@image: 'figures/ppp.png'; md5=b88d98a9ccdd489d91b45c8cf2dcbad1" msgstr "translated" #. When image changes, this message will be marked fuzzy or untranslated for you. #. It doesn't matter what you translate it to: it's not used at all. #: C/netspeed_applet.xml:209(None) msgid "@@image: 'figures/wavelan.png'; md5=90f925a64abe393adc5834fceba515fe" msgstr "translated" #. When image changes, this message will be marked fuzzy or untranslated for you. #. It doesn't matter what you translate it to: it's not used at all. #: C/netspeed_applet.xml:221(None) msgid "@@image: 'figures/plip.png'; md5=0761a22dfa7b0b56e41e020cd701db68" msgstr "translated" #. When image changes, this message will be marked fuzzy or untranslated for you. #. It doesn't matter what you translate it to: it's not used at all. #: C/netspeed_applet.xml:249(None) msgid "@@image: 'figures/settings.png'; md5=219a6bc0e89cb9634d49025f9d3c6604" msgstr "translated" #. When image changes, this message will be marked fuzzy or untranslated for you. #. It doesn't matter what you translate it to: it's not used at all. #: C/netspeed_applet.xml:296(None) msgid "@@image: 'figures/details.png'; md5=60fedda8f88b634f16ab31090b5bdd67" msgstr "translated" #: C/netspeed_applet.xml:24(title) msgid "Netspeed Applet Manual V1.1" msgstr "Netzmonitor-Applet-Handbuch V1.0" #: C/netspeed_applet.xml:26(para) msgid "Netspeed Applet is shows how much traffic occurs on a specified network device." msgstr "Das Netzmonitor-Applet zeigt den Netzwerkverkehr auf einem bestimmten Netzwerkgerät an." #: C/netspeed_applet.xml:29(year) #: C/netspeed_applet.xml:102(date) msgid "2002" msgstr "2002" #: C/netspeed_applet.xml:30(holder) msgid "Jörgen Scheibengruber" msgstr "Jörgen Scheibengruber" #: C/netspeed_applet.xml:41(publishername) msgid "GNOME Documentation Project" msgstr "GNOME-Dokumentationsprojekt" #: C/netspeed_applet.xml:2(para) msgid "Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License (GFDL), Version 1.1 or any later version published by the Free Software Foundation with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. You can find a copy of the GFDL at this link or in the file COPYING-DOCS distributed with this manual." msgstr "Das vorliegende Dokument kann gemäß den Bedingungen der GNU Free Documentation License (GFDL), Version 1.1 oder jeder späteren, von der Free Software Foundation veröffentlichten Version ohne unveränderbare Abschnitte sowie ohne Texte auf dem vorderen und hinteren Buchdeckel kopiert, verteilt und/oder modifiziert werden. Eine Kopie der GFDL finden Sie unter diesem Link oder in der mit diesem Handbuch gelieferten Datei COPYING-DOCS." #: C/netspeed_applet.xml:12(para) msgid "This manual is part of a collection of GNOME manuals distributed under the GFDL. If you want to distribute this manual separately from the collection, you can do so by adding a copy of the license to the manual, as described in section 6 of the license." msgstr "Das vorliegende Handbuch ist Teil einer Reihe von GNOME-Handbüchern, die unter der GFDL verteilt werden. Wenn Sie dieses Handbuch separat verteilen möchten, können Sie dies tun, indem Sie dem Handbuch eine Kopie der Lizenz, wie in Abschnitt 6 der Lizenz beschrieben, hinzufügen." #: C/netspeed_applet.xml:19(para) msgid "Many of the names used by companies to distinguish their products and services are claimed as trademarks. Where those names appear in any GNOME documentation, and the members of the GNOME Documentation Project are made aware of those trademarks, then the names are in capital letters or initial capital letters." msgstr "Bei vielen der von Firmen zur Unterscheidung ihrer Produkte und Dienstleistungen verwendeten Namen handelt es sich um Marken. An den Stellen, an denen derartige Namen in einer GNOME-Dokumentation vorkommen und wenn die Mitglieder des GNOME-Dokumentationsprojekts über diese Marken informiert wurden, sind die Namen in Großbuchstaben oder mit großen Anfangsbuchstaben geschrieben." #: C/netspeed_applet.xml:35(para) msgid "DOCUMENT IS PROVIDED ON AN \"AS IS\" BASIS, WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES THAT THE DOCUMENT OR MODIFIED VERSION OF THE DOCUMENT IS FREE OF DEFECTS MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE OR NON-INFRINGING. THE ENTIRE RISK AS TO THE QUALITY, ACCURACY, AND PERFORMANCE OF THE DOCUMENT OR MODIFIED VERSION OF THE DOCUMENT IS WITH YOU. SHOULD ANY DOCUMENT OR MODIFIED VERSION PROVE DEFECTIVE IN ANY RESPECT, YOU (NOT THE INITIAL WRITER, AUTHOR OR ANY CONTRIBUTOR) ASSUME THE COST OF ANY NECESSARY SERVICING, REPAIR OR CORRECTION. THIS DISCLAIMER OF WARRANTY CONSTITUTES AN ESSENTIAL PART OF THIS LICENSE. NO USE OF ANY DOCUMENT OR MODIFIED VERSION OF THE DOCUMENT IS AUTHORIZED HEREUNDER EXCEPT UNDER THIS DISCLAIMER; AND" msgstr "DAS DOKUMENT WIRD »WIE VORLIEGEND« GELIEFERT, OHNE JEGLICHE GEWÄHRLEISTUNG, WEDER AUSDRÜCKLICH NOCH STILLSCHWEIGEND, EINSCHLIESSLICH, ABER NICHT BESCHRÄNKT AUF, GEWÄHRLEISTUNGEN, DASS DAS DOKUMENT ODER EINE MODIFIZIERTE VERSION DES DOKUMENTS FREI VON HANDELSÜBLICHEN FEHLERN UND FÜR EINEN BESTIMMTEN ZWECK GEEIGNET IST UND KEINE RECHTE DRITTER VERLETZT. JEGLICHES RISIKO IN BEZUG AUF DIE QUALITÄT, GENAUIGKEIT UND LEISTUNG DES DOKUMENTS ODER EINER MODIFIZIERTEN VERSION DES DOKUMENTS TRAGEN SIE. SOLLTE SICH EIN DOKUMENT ODER EINE MODIFIZIERTE VERSION DAVON IN IRGENDEINER WEISE ALS FEHLERHAFT ERWEISEN, TRAGEN SIE (NICHT DER URSPRÜNGLICHE VERFASSER, AUTOR ODER EIN MITWIRKENDER) DIE KOSTEN FÜR JEGLICHE ERFORDERLICHE SERVICE-, REPARATUR- UND KORREKTURMASSNAHMEN: DIESE BESCHRÄNKUNG DER GEWÄHRLEISTUNG IST WESENTLICHER BESTANDTEIL DIESER LIZENZ. JEDE VERWENDUNG EINES DOKUMENTS ODER EINER MODIFIZIERTEN VERSION DES DOKUMENTS UNTERLIEGT DIESER BESCHRÄNKUNG; UND" #: C/netspeed_applet.xml:55(para) msgid "UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, WHETHER IN TORT (INCLUDING NEGLIGENCE), CONTRACT, OR OTHERWISE, SHALL THE AUTHOR, INITIAL WRITER, ANY CONTRIBUTOR, OR ANY DISTRIBUTOR OF THE DOCUMENT OR MODIFIED VERSION OF THE DOCUMENT, OR ANY SUPPLIER OF ANY OF SUCH PARTIES, BE LIABLE TO ANY PERSON FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF GOODWILL, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, OR ANY AND ALL OTHER DAMAGES OR LOSSES ARISING OUT OF OR RELATING TO USE OF THE DOCUMENT AND MODIFIED VERSIONS OF THE DOCUMENT, EVEN IF SUCH PARTY SHALL HAVE BEEN INFORMED OF THE POSSIBILITY OF SUCH DAMAGES." msgstr "UNTER KEINEN UMSTÄNDEN UND GEMÄSS KEINER RECHTSLEHRE, WEDER AUFGRUND VON UNERLAUBTEN HANDLUNGEN (EINSCHLIESSLICH FAHRLÄSSIGKEIT), VERTRÄGEN ODER SONSTIGEM, KANN DER AUTOR, DER URSPRÜNGLICHE VERFASSER, EIN MITWIRKENDER ODER EIN VERTEILER DES DOKUMENTS ODER EINER MODIFIZIERTEN VERSION DES DOKUMENTS ODER EIN LIEFERANT EINER DIESER PARTEIEN VON EINER PERSON FÜR DIREKTE, INDIREKTE, BESONDERE, ZUFÄLLIGE ODER ALS FOLGE AUFGETRETENE SCHÄDEN IRGENDEINER ART, EINSCHLIESSLICH, ABER NICHT BESCHRÄNKT AUF, SCHÄDEN DURCH GESCHÄFTSWERTVERLUSTE, ARBEITSAUSFÄLLE, COMPUTERAUSFÄLLE ODER FUNKTIONSSTÖRUNGEN ODER JEGLICHE ANDERE SCHÄDEN ODER VERLUSTE, DIE DURCH ODER IM ZUSAMMENHANG MIT DER VERWENDUNG DES DOKUMENTS ODER EINER MODIFIZIERTEN VERSION DES DOKUMENTS ENTSTANDEN SIND, SELBST WENN DIESE PARTEI ÜBER MÖGLICHE SCHÄDEN INFORMIERT WORDEN SEIN SOLLTE, HAFTBAR GEMACHT WERDEN." #: C/netspeed_applet.xml:28(para) msgid "DOCUMENT AND MODIFIED VERSIONS OF THE DOCUMENT ARE PROVIDED UNDER THE TERMS OF THE GNU FREE DOCUMENTATION LICENSE WITH THE FURTHER UNDERSTANDING THAT: " msgstr " DAS DOKUMENT UND MODIFIZIERTE VERSIONEN DES DOKUMENTS WERDEN GEMÄSS DEN BEDINGUNGEN DER GNU FREE DOCUMENTATION LICENSE MIT DER FOLGENDEN VEREINBARUNG BEREITGESTELLT: " #: C/netspeed_applet.xml:48(firstname) #: C/netspeed_applet.xml:84(firstname) #: C/netspeed_applet.xml:104(firstname) msgid "Jörgen" msgstr "Jörgen" #: C/netspeed_applet.xml:49(surname) #: C/netspeed_applet.xml:85(surname) #: C/netspeed_applet.xml:105(surname) msgid "Scheibengruber" msgstr "Scheibengruber" #: C/netspeed_applet.xml:51(orgname) #: C/netspeed_applet.xml:60(orgname) msgid "GNOME Project" msgstr "GNOME-Projekt" #: C/netspeed_applet.xml:53(email) #: C/netspeed_applet.xml:86(email) #: C/netspeed_applet.xml:106(email) msgid "mfcn@gmx.de" msgstr "mfcn@gmx.de" #: C/netspeed_applet.xml:57(firstname) #: C/netspeed_applet.xml:94(firstname) msgid "Pedro" msgstr "Pedro" #: C/netspeed_applet.xml:58(surname) #: C/netspeed_applet.xml:95(surname) msgid "Villavicencio Garrido" msgstr "Villavicencio Garrido" #: C/netspeed_applet.xml:62(email) #: C/netspeed_applet.xml:96(email) msgid "pvillavi@gnome.org" msgstr "pvillavi@gnome.org" #: C/netspeed_applet.xml:81(revnumber) msgid "1.2" msgstr "1.2" #: C/netspeed_applet.xml:82(date) msgid "2006" msgstr "2006" #: C/netspeed_applet.xml:91(revnumber) msgid "1.1" msgstr "1.1" #: C/netspeed_applet.xml:92(date) msgid "2005" msgstr "2005" #: C/netspeed_applet.xml:101(revnumber) msgid "1.0" msgstr "1.0" #: C/netspeed_applet.xml:112(releaseinfo) msgid "This manual describes version 0.12 of Netspeed Applet." msgstr "Dieses Handbuch beschreibt Version 0.6 des Netzmonitor-Applets." #: C/netspeed_applet.xml:115(title) msgid "Feedback" msgstr "Feedback" #: C/netspeed_applet.xml:116(para) msgid "To report a bug or make a suggestion regarding the Netspeed Applet applet or this manual, send a e-mail to Jörgen Scheibengruber." msgstr "Für Bugreports oder Verbesserungsvorschläge zum Netzmonitor Applet oder diesem Handbuch bitte eine E-mail an Jörgen Scheibengruber schicken." #: C/netspeed_applet.xml:122(primary) #| msgid "About Netspeed Applet" msgid "Netspeed Applet" msgstr "Netzmonitor-Applet" #: C/netspeed_applet.xml:127(title) msgid "About Netspeed Applet" msgstr "Info zum Netzmonitor-Applet" #: C/netspeed_applet.xml:129(title) msgid "Netspeed" msgstr "Netspeed" #: C/netspeed_applet.xml:135(phrase) msgid "Netspeed." msgstr "Netspeed." #: C/netspeed_applet.xml:141(title) #: C/netspeed_applet.xml:147(phrase) msgid "Netspeed showing the sum in a 48px panel." msgstr "Netspeed zeigt die Summe in einem 48 Pixel breiten Panel an." #: C/netspeed_applet.xml:152(para) msgid "Netspeed Applet displays the network traffic on a specified device like eth0, ppp0, plip0, etc. More over it provides information about the configuration of the network device." msgstr "Das Netzmonitor-Applet zeigt den Verkehr auf einem Netzwerkgerät wie eth0, ppp0, plip0, etc. an. Außerdem bietet es Informationen zur Konfiguration des Netzwerkgeräts." #: C/netspeed_applet.xml:158(title) msgid "Netspeed Icons on Panel" msgstr "Netzwerkgeschwindigkeits-Symbole im Panel" #: C/netspeed_applet.xml:165(para) msgid "Icon" msgstr "Symbol" #: C/netspeed_applet.xml:166(para) msgid "Description" msgstr "Beschreibung" #: C/netspeed_applet.xml:175(phrase) msgid "Loopback" msgstr "Loopback" #: C/netspeed_applet.xml:178(para) msgid "The Loopback interface." msgstr "Die Loopback-Schnittstelle." #: C/netspeed_applet.xml:187(phrase) msgid "Ethernet" msgstr "Ethernet" #: C/netspeed_applet.xml:190(para) msgid "Ethernet connection." msgstr "Ethernetverbindung." #: C/netspeed_applet.xml:199(phrase) msgid "PPP" msgstr "PPP" #: C/netspeed_applet.xml:202(para) msgid "Point to Point Protocol connection." msgstr "Verbindung mittels Point to Point Protocol." #: C/netspeed_applet.xml:211(phrase) msgid "Wireless" msgstr "Wireless" #: C/netspeed_applet.xml:214(para) msgid "Wireless connection." msgstr "Wireless connection." #: C/netspeed_applet.xml:223(phrase) msgid "PLIP" msgstr "PLIP" #: C/netspeed_applet.xml:226(para) msgid "Parallel Line Internet Protocol connection." msgstr "Verbindung mittels Parallel Line Internet Protocol." #: C/netspeed_applet.xml:235(title) msgid "To Add Netspeed to a Panel" msgstr "Das Netzmonitor-Applet zum Panel hinzufügen" #: C/netspeed_applet.xml:236(para) msgid "To add Netspeed Applet to a panel, right-click on the panel, then choose Add to PanelNetworkNetspeed Applet." msgstr "Um das Netzmonitor-Applet zum Panel hinzuzufügen, klicken Sie mit der rechten Maustaste auf das Panel und wählen Zum Panel hinzufügenInternetNetzmonitor-Applet." #: C/netspeed_applet.xml:244(title) msgid "Settings" msgstr "Einstellungen" #: C/netspeed_applet.xml:246(title) msgid "Netspeed Applet Settings" msgstr "Netzmonitor-Applet-Einstellungen" #: C/netspeed_applet.xml:252(phrase) msgid "Netspeed Applet Settings." msgstr "Netzmonitor-Applet-Einstellungen." #: C/netspeed_applet.xml:257(para) msgid "In this dialog you can change the settings of Netspeed Applet:" msgstr "In diesem Dialog können Sie die Einstellungen des Netzmonitor-Applets ändern:" #: C/netspeed_applet.xml:261(para) msgid "Network device: Choose the network device that the applet should monitor from the popdown list of the combobox. Usually all available devices are listed, however you can enter one yourself, too." msgstr "Netzwerkgerät: Wählen Sie aus der Liste das Netzwerkgerät, welches das Applet anzeigen soll aus. Normalerweise werden alle verfügbaren Geräte angezeigt, aber Sie können auch ein beliebiges eingeben." #: C/netspeed_applet.xml:265(para) msgid "Update interval: Enter the time between two updates of the applet." msgstr "Aktualisierungsintervall: Bestimmen Sie die Anzahl der Millisekunden, die zwischen zwei Aktualisierungen vergehen soll." #: C/netspeed_applet.xml:268(para) msgid "Label font size: Enter the size of the text displayed in the applet." msgstr "Label font size: Enter the size of the text displayed in the applet." #: C/netspeed_applet.xml:271(para) msgid "Show sum instead of in and out: If you check this box then the applet will show the sum of the in and out rate. The applet will take only half of the space in the panel in this case." msgstr "Zeige die Summe anstelle von Rein und Raus: Wenn Sie diese Box anwählen, zeigt das Applet die Summe der Bytes anstatt von rein- und rausgehenden Bytes. Dadurch braucht das Applet nur halb so viel Platz im Panel." #: C/netspeed_applet.xml:275(para) msgid "Show bits/s (b/s) instead of bytes/s (B/s): Check this if you want the applet to display bits per second instead of bytes/s." msgstr "Zeige Bits/s (b/s) anstelle von Bytes/s (B/s): Wählen Sie diese Box aus, wenn Sie möchten, dass das Applet Bits statt Bytes pro Sekunde anzeigt." #: C/netspeed_applet.xml:279(para) msgid "Change icon according to the selected device: Usually the applet will show an icon representing the type of network device you monitor. So it will show a phone for Point to Point connections (ppp - modems, etc.), a network card for ethernet (eth), etc. When this is unchecked, the applet will always show the network card icon, no matter which device you monitor." msgstr "Das Icon dem ausgewählten Gerät anpassen: Normalerweise zeigt das Applet ein Icon, dass dem ausgewählten Gerät entspricht (ein Telefon für peer-to-peer/ Modem Verbindungen, eine Netzwerkkarte für Ethernet, etc.). Wenn diese Box abgewählt ist, zeigt das Applet immer eine Netzwerkkarte, unabhängig vom ausgewählten Gerät." #: C/netspeed_applet.xml:285(para) msgid "Always monitor a connected device, if possible: When your connection is down, Netspeed Applet look for a running one for monitoring." msgstr "Always monitor a connected device, if possible: When your connection is down, Netzmonitor Applet look for a running one for monitoring." #: C/netspeed_applet.xml:291(title) #: C/netspeed_applet.xml:293(title) #: C/netspeed_applet.xml:299(phrase) msgid "The details dialog" msgstr "Der Details-Dialog" #: C/netspeed_applet.xml:304(para) msgid "This dialog shows you some useful information on the configuration of your network device." msgstr "Dieser Dialog zeigt nützliche Informationen zur Konfiguration des Netzwerkgerätes an." #: C/netspeed_applet.xml:309(para) msgid "Internet Address: The IP (Internet Protocol) address of the network device." msgstr "Internetadresse: Die IP-Adresse (internet protocol) des Netzwerkgeräts." #: C/netspeed_applet.xml:312(para) msgid "Netmask: The netmask which depends on the size of your LAN (Local Area Network). A usual value is 255.255.255.0 (a class C network)." msgstr "Netzmaske: Die Netzmaske hängt von der Größe des lokalen Netzes (LAN) ab. Ein üblicher Wert ist 255.255.255.0 (entspricht einem Klasse C Netzwerk)." #: C/netspeed_applet.xml:316(para) msgid "Hardware Address: Often also referred to as the physical or MAC (Media Access Control) address. A worldwide unique identifier for your network card." msgstr "Hardwareadresse: Diese wird oft auch MAC-Adresse (Media Access Control) genannt. Eine weltweit eindeutige Identifikationsnummer ihrer Netzwerkkarte (nur bei Ethernet-Netzwerkkarten).." #: C/netspeed_applet.xml:320(para) msgid "P-t-P Address: The internet address of the \"other side\" of your PPP (Point to Point Protocol) connection." msgstr "P-t-P Adresse: Die Internetadresse der \"anderen Seite\" Ihrer ppp-Verbindung (peer-to-peer protocol)." #: C/netspeed_applet.xml:324(para) msgid "Bytes in: The amount of bytes that the network device has received since it has been connected to the network." msgstr "Bytes rein: Die Anzahl der Bytes die das Gerät empfangen hat, seit es mit dem Netzwerk verbunden wurde." #: C/netspeed_applet.xml:328(para) msgid "Bytes out: The amout of bytes that the network device has sent since it has been connected to the network." msgstr "Bytes raus: Die Anzahl der Bytes die das Gerät gesendet hat, seit es mit dem Netzwerk verbunden wurde." #. Put one translator per line, in the form of NAME , YEAR1, YEAR2. #: C/netspeed_applet.xml:0(None) msgid "translator-credits" msgstr "Mario Blättermann , 2009" netspeed_applet-0.16/help/C/0000755000175000017500000000000011402462046012726 500000000000000netspeed_applet-0.16/help/C/figures/0000755000175000017500000000000011402462047014373 500000000000000netspeed_applet-0.16/help/C/figures/plip.png0000644000175000017500000000043411402462047015766 00000000000000PNG  IHDRbwIDAT8-0_7HHAp N$8=*  !A# lܴ}_gSGE,zj۶ia,yk_7뢪*!uZɘ3d2NZ7vD;X,r+ 䍾gʬ810h\K.K߾~G)RĘx ,퐙WP.Y|KK\{|i6z$:yL&B3;y\% kuzNR ΄injӌFIMtڶM6 >~& f]1 0 67ZlEc(""C>taD;]-=ȆDz~@4ѼE-uOjulLHHʕ3iI~ۗl|h疜,oJ|R*t8$%%776+vcڔH"67mjjY+;sH윉L:zÇ,fݝQmnnniii`ּd2YrrrlllTTؘܼjfFcX3?dzzjxxcǎXW}[? R9)sѢEii===ACPP ڼ9[tYT[[+gYV] ۲e3f>8믦D9))>3;>B1::JV{1LЩ10,$8Z111eee/WΠh5ܹ;2D(|V޽GPXCmozÇQѳg>Fijj }ivUW_|`i(** ~cc333fsL7I$E*JT dKw\Kd;;;@bb"ܻ{?ag2͎bKҲh4 ڵ_%b95 ~pr5rttdoܸ d줕R9eeR/fKtkkyt]jv V(*jjj t vhZ-fE9pPG˽rڂ&+wltҒk 6kt~NCm_'tFR,`Rzŋryڒ\۷ۗfMRY^e}}CEŗpx ԩmmmL&3'';,lZnjjJ@cm t:0F3cc㥥۷뫫/EG >(..ɾ;6{!߆ο\ qzbr).X{xhWVVUUpw'O#3s?^ƻT!7LcuMMMDDĆ [[cf:r`3EݗJ?g0"Zj-ݱ ,ϫeׯ]$kjj"""-C>Q( "7w ~le˪*eYRJU\\#c,ڻwjg6Ɨd䫯qVkT-55wfFɓ0tgJ~AD|ݱ,Әal [?ҡ)׮=qDII\.$w޴)T 9ziɄf5ҥUU|==IMM1laP(,(8Muz cwT8&&0_ heYq-{cHHpaiNYY%" 3[cS-K'jcbΕ韅g/m FT* 幓NYy"555Eil1 i=}%wlJ)PhBto9d)Jq͞|`Ҋc )gf A[-|CCC_X$2taLtS1J R(JQZW (_e7IENDB`netspeed_applet-0.16/help/C/figures/settings.png0000644000175000017500000005024711402462047016671 00000000000000PNG  IHDRc4ܓsBIT|dtEXtCREATORgnome-panel-screenshot7w IDATxohiov=P^v([&:-Vj~!?QUZv({5]!1s-,,.HƱh.bf28jM3n2SK]fZ_63/a S>ñƱ܁-LJ(\bjofͯ&2RI(7 '팅b }M lgTẏ̪y _ ਙ ~b 64Uuo#LZόg9w5y%uw`1(~J1:J$.vYK,#sR ]G_yU|TK_4N0S ]oܴ?at:y^ajSQ|ڲm(h ? 1ͯg;sŤb̼&v+U˧ZiUXmvMo"* j[{f e@IICQeq"I `% - ZQډ.> p}8&9qGwf +!z8W2zWzX0 2HŽtL o2Y16/u.z_7Qj봴ni[W?CmxnMb,(zmjʵe-%MIGB3 37d[rmjAqXcQd?*Z]U ESC^@~̘/:tK$5rniWw!WH1m߹^6Ԫ(. qZ4(|ivW!mխ CFr5KҴ*[eac͌MM3y}.V[jY{%f~O3OQiUW̿wl;4-f8a@Xؖl|sjd7l(zNk c&f^ܾ%ZA %jܲ=<_TvjXaŌvVC J (J+*3/Ґ+ÓNLsKof F zlcM &m<r ?bR4X XMl'ۢTZֱmίʯDKٜ0 ї!Ocb.6el^XXzKm0 tQv+F(Oj6sz\=̿kkJ F KceܡZL.ErW;Ґ+Ӫ(D¸~5sDz6C1}UYp1gkƀP:%+S6fZPrW-Lv,|o/`/v W+Sk>3ТM{#cxWA_VX ҬLff;8k:׎_M?rڵcYE w-a>f^ Y دEUyUM#CtqF rJ,~@\z)_XhòR5V|nj)_kv/ڶ\?YZq]ԕO }P&2K{ڋ6;+^Z7 !B+]3~ъik+(-D^-sJt ~y+KZѲ05 nf/D^h]MA$6>nO/L(@C'N h&C0.)P-5u|8록QKձ^-+}%rWaEӏ0Vu"/´TK>Q>7E)9J=3/}aEo 6> cN25гyn 6 ώ) >.Cо;cjeFVCG80ZTJ֥jvCϯi5VP6挍d['^Vԭ[ jegU}Y8͌*Y=PWv/ڶdzE.[OWX*%zzU]1ֲm۞Y}ҊZA\,_ ~t`b`6vt9ptw3bgE6I?xOQ,O-ۘ+/0ݾ2v|Rv|Z%ZP:j:Z= )fWC%RۖL~PyymAת(6U6ݎ5iť(|hQ u-- /'b~ .w[ܗ~}B]1P!'!hRIIB&%@!!hRIIB&%@!!hRIIB&%@!!hRIIB&%@!!hRv|.FIGlB`Z=/4f9_ Hb5W}Xdǥ)7@/ثF=ėUy8b7̿ľgX&L<]fRM\<'þ_DǮ8M(*.&cG>vg:t}H3&pϭg;G蝾tbOYΦS?˵s#ğsiТs<[W} Tx_JWkrxؑJ| sWqg8~aGƾ% \S|,01?}ܱybSCd>$}5t|3Xlttj=Dq}ٱm%yx!BƨeJ\]J*WubfWAx5#|DL1yB#$i!|o51҉Or/鄿g*ՁCuWҺBP #WwEuz__B#uX l&7Y,!>T|z9WvCxjx ^b !N.B&%@!!hRIIB&%@!<*tZ>3 ^L= m} J>DCIIB&%@!!إ\X? @!!hR^E^BZH8$!*9|˕|sY=4ǥ. ߹҉bsg갋#đwә}ʴ^N"{VcMgr̝?ti>IZ*c%i24^7NsFkrNjm{r),gֶ_7ұ8}T\rmWXϽ0d7Y+#;q/cxV0tֺr Q闑XZLbec߆1#N$R|K*D) 0ė%!}0ZW[EmWF {i2[xo&z˓5]#~y&^鹗Die_:`rcd  ]vU\>Б b/׃;Z:/T7#uҋov s|"IQBLL_e¢t+LW`N}`2dN/I3a,!oQ\kWV`J7R3pY-h+P|UajmW+il1dv%K1wM!g|}}=VL!&F{6\܀dmZ{X}4ZЕ(mj|5~ ?oL3|- oG gs'WT'e9uؑz.FO}3ѥ~#k?H.UAϤst Vf=ȬSWkh1{(ﲫ(TS390cɥ4OtOI-*Cj)"z] 1aThihYtm婇ʽ#:~HXJ_~`V/}ۥnl z,77hy_ece?Q:^!9t8vZ;\GZ5S >Ӌ 7{5bgЂo$ml1 |5/k ^5_Юӗ,jcf.L[G僀+}V3n]^op!BL 6>_1AjC'|]sИh=~RzZ [s#Cv9Fm+`!f8j?`t`_qb>ӉkЏz)_sIe7/nhWlί7cJgy;oژy;ԃ=YtxM&Rnj~d*uANCvRz!w,Zr!D$Smt˅ <'&IIB&%@!<*fY谋 0{`B4) BѤ$!D MJB4) BѤ$!D MJB4)$h\|/k]m7,$?$`!4B&%@!!hRf>yE{@:oe>qX0ߓWMIBξ|P}|8ݑvAFtNʿJ a)NL+v*F#r|:%}m&ʒMEiYa˅坘`>/sVgaqD;`aV_ĬYq{YXJ{3\]kX{]]Vg:]t3S~3DpriZIm/rAjrQ cPP:,^ lrqtmn;fۅ>tO:E7mjIwSz.։sEV>~ B-Fl39bl+o*ߛiWʉ wffγn{:Lx",6C8m'nah[{&YH.NJrغ~;{y(}jߑw*WS Z9?Os?.0lx{/W&Z*3ßφ12-1,Dt.Z׫޸BexdxN!|㽁V'v]XZ\bd 4{3`_/h'_`)>%vqp)w|綯<R?~$>m>YvNpL' 8U%PbNNto[~z5⛲t2\ʥMДͥ3֢g>ɛ%zkwT2e{mwu$:UN1T.w;vg'q!Mc.K'ۓ/:L[' PxrY:/У*lt+O"lźѹ(/x. gRz=gb+0I|笻.Vԯvvg-HUu1z;.[_nhȬ~SÖُRv9НKQxJRrHO:\NxtP wv يދ鱢嶶 t 0XM+lM~}l<kk.hn=anrϹ~7Mчn&nmjǓ fRjE 3n{|Zn5hUT)&GMX3oܜ`SnJ/&iH_zл mCM[g~$xGrXNyoaEssݚ`~a|GՂe yk<_Ю>_m<:(G>XG zY;UqNrS̎w9gq8YѺ{I8xL?%<ևL'Kxyyk h_qb>ӉkЏz)@#42?=N~XIIB&uoC=Y8$9NO&B&%@!!hRIIB&%@!!hRIIB&% v>W|L= '8 N.GIIB&%@!!ĮtvYiDgUѴ6׉ibpף(K]@Bq L Ko<*SN_F0~noDqueQGۑG]cb}}Rz6MeɦL7 $l'f͊j:Y1;$-r͊k.},t&X,PC IDAT-vcyt{z}E7镐 ub2SyeKa!b/Lg㳆czJS8IK1R)ZybOO#^cfnt2#J߭_gyYx#N$R|K*D}~5O:@p~JN%_>AMʖoA/{hu/gjoaL#Jz":UJg-TzZԤπ~t>׷c^|6~QAiz- )m_.˜N|i鑍fД- g4j҉$4Z+8n%ļѹhů8uԎZOv|rL?_,:u7`Yo=aN؏) ::`z*YR:\UGMНKoDg3Qzz;unS dr?X@KnُJg-TzzXi&-)9։FD le6[޶XJe{Ϲ~ o3w#?EqB#n/rg`IK%JsXנUQioS.9p 3n{7lxnNI gWe_ryd }hW|5o)˔5\Y+niܖ os#l`,'^ 7T}Cq"T<>xL*u|zMմ^' Oѷ}78A2c~MX7:r{&'p=2\Lm![X09>ˎL'AxsF x3 Ig?M/ am~ѴN,='^Cۋ@ಋh'/?.{J.8 cz D{Ɯosb. zZU54@yS]]Vg:]t3Z39bl X>geZZ7|g/GΕ4 Z'?痕:+||ӻ8혵Nlә>{~2vS)r/W4g:w9|o9+f͊k.鵭eL/zvb֬8,nmqD;`a*JeM[n -`>ۍlP^-b _MM$V8T¯I2/h'_`)>%vn:Wx1oØϗ}wq '@]B/c~e['s  2?Q{z_S'KE(ט'wkkpnd/gc=vXxFW>ʕqmQ }.VK WܦcX-3ء`)@Z- /'12[O"^vMUhU5||,s|4@j*m$ݿ,eV~8UkXsu0S*Կ޲&rաB0=]-7"opb~1ylj♭ g??r QMZLxD^!Z":bDq^.>;֔¿ N= Iz6S? |gՒ i\ދ2%+TywWi[jnjlsz|s0n$fp_<7tf/ZގU?Q-Q/C]%>o%:7Vn!96YB@ u1h8oQRSL/NQ?%jeFC{o?" T| n ƥqO,U*k)6[Vz{4X`Eh *}^-oYC} (L{,mr~ p~'q6"`3wi/k ^5_ЮlK Z 0TL >I/&/נUQioS6W/|[jh%]e E'3fjy+8Ac=!)UUSZ#._pu>`&2ꛚ7cJgy;n3_ЮU}\6M5'3M5_+StjX/^'u•sZ$}doV~%kЏzi&Qc}q:_1>[qΊK7_m짾G _0zMtl|;.<_v]jT Qɩ dV6GBqsQ_\pk#YrgmHb,dBcq@!DIB&%@!!hRIIB&%@!!hRIIB&%@!!hRIIB&%@!!hRGDu?p4EL!г !t:"rҐ􎂽J"DɌQ2O굽_5I[v,ySu|hd]x_яkoh/OҠWGQ].~f|2Lc>Ӊfq;c:~GXW#Ϲ_q:rokwd+M:{+YxF ubxq}pRӺt<֛_ōal i>Yqߔ˫\ Yq %,I0EN̚g­ #nh =BSʵѷvWX,ݯ &n02]Yo5 _MM$S 'Z 8p?,6G裝H|4T۹7t^%s+>be߆1/ybOOXgs:d,iS]\wB,-.1 j2Pw〫n*-k`ug]˩oUx137O: n$ %C])_{D-6/>[ݮR)Wʵ#3EΎ ~r?~U(g~EpgVi{mZ!06Ւ;k u(Тr#$EoTVUG?;'G(x7bt Ei~'_v?,봚4md?1:h-׭UG~*z?MҡB0=]-7"o﷕YSrmnŭDڼ У ϵ|VW:9g3k@ Ϙ7RKDX(EiEvu)k&rgj5o@|57mx~+W>MĬً'vG*ZUjGn"rW!ӷ|'+>Sݯ <n[ͦ21|/]V]Q:me )(n]2A#x0L~E;/xs5^pjZw;g*8pU*k$è\J"%e#^\ަZ(~G[TPԨR۷۾b+[s=|#lc Yޏ+WtGos3n{K)pݚ`ƽ !0tZn 1;{;ol-.܉]̹V*n6<7'X&'\_VEM!brZߩE~{"2r`EA":^׮ld:@' WxƒdV  =̾4q YQaNw~}܇RLEGGstN:o'c@!fǻKsފnl8_P]sc ܴJ2 o@PnR:ꮢre;?=w7Jyj74>_qlH~4{'դw/c|9+ᇹOzU;5ձJ?Q@Q.n %E'u*πO֚NW-( :_ 鯿7-<wGO>x+voE^ؿnl־:0,_ ~,=Ou2v:?{\^xcJLk>oզp,~}M~A'tth4y~x8! D4S@B!r$!D MJB4) BѤ$!D MJB4) BѤ$!D MJB4) BѤ$!D M?\5'3!gS5ICs Ny<А9((/Q+Qq,ySuf=]h֏N=SJo&Eqߚusϝ(}*;IrgkB4^ϓv+rY0|'WNHtBqp)׋Wq sy53a.AUn`>m3a-:cDcŒf7["pRv{0?1.㢃h83oӤ Z7hL_>3O/3fYwVPwY暅ւt*XvVBp.EZ7u?i6j)Lg:Pk!OV'?O\6PTz.;UmRR=WiߖRmG"b. ܬX=˱  POZuEx/ o% _~0"]iY|R5oCHL3\cEۦ^FJ)y4ǙC|a-}BO"Vg Mͥ,w36ϠT8JޮZ;T*^j`?ni6n/ԡYo?Q[@_6HJUҪn}ٷ֯}NEq'_ TϽXMi_K e?S:Zۧ w[Y4Vcm&0v*{jP,{-ҦeԢ:ԢR9'n3 x_dȶۦԝVu+ݦW~L;bL. UXI†xQ>H*VB蝁| eq|bԢҪgj^S`ŗ<Jvj, VKw̒*էʩrZi=].~zZ{K (GӪn}֯+ $wlfbrAO ee &K{%l*=@Az͉q H"vЫRADgwCV=93i4w,{2f!pMڡRY]NUQ6bq֣n֍zP*j'ÿ˹u=_;wVu+R^sU}{S{9R(}}}H|tZ{Pfp^ 2qHdc$:u7`Yo=Wn0yʚw1]?;8iO? 8|8:tg \T #Q%X/]v1DD38O !; BѤ$!D MJB4) BѤ$!D MJB4) BѤ$!D MJB4) BѤ$!D: :Wu9EL!г !ɿXGY8I|t֡Z?Ϳ7Q`T_(gQ ʾ[r\{N{\)F}(Q]]Ҏ{ԀWAcv3_dpF|K$hc Z'ر`^nd?%XP,ZXQ>xN3O/VJf_ęy&mAUV~e]EGFqG"b. ,թZ\Ế4+(hT+mW,CM+Ap/ ~~ R%h0tsQV6)̿x0"]iY|ri j(J7} ~qIOH&|cD 0z"߳V[!_  rυ$2;%xmoE޲͕گR ^"]hBC[iye4^"]8x+re+~f¼+._6_)Ob(]PeTSʵvōu߅e%VJ_=f2jT4ʱ #C00z.wz~%`ع2zۑ(|[1Zʝ q8"~גIDAT󊃕T$CG]ml ZUΊeq` kƎd~`\g sЦtL`{=IjIwB{JWJM ( =[mֈVZ>:~K.[W*[)7:h|PmJ줶MN7]zVSoM[yUzJe(tmSͱZ__,Co K{Ki OQE΀c(!ğ1vX7/2d[rm+?Zn?+ަL`TھZү4oݗZ}+-OUfn6(;z֯_ wGE +8_ذYNgJ_=f2:趩X &0#k,FߵmN IS4εb 6K~=ŨEU0p Sĭe GL~?iIcWvB<3B q︤04sN;WqnLqJkʘV)9ubo!3# ^\>.B-i]1ӤIga&OP\ĝs ķXY335$KޟFMQ4D4 mnLk< !xb؎'@)ұgPwx x\)f%~*.j?wAFS.4 hݲ} !ohgi.1F>ݔs=-*{>#F*Srp.ǹ44M=CAZڨ[% B@ j}cݣ}frzoDOoI. t`%P2hN4N J<g5OA$ UԚF>:N|o?Onݽ\tm_?'G? !+_>[~]UڹvEruqܛ$oX9&3uob~8@խƔ %"җQM CNկXPO(}aD =*֩ V5wZnYM %AKқE 5i9ǖ6v˯ԁ_ bi0^rmʀqxc 11rn1e;bd+ER8 ڿ/?Tvn熃iL6ljwA~6mjOB\,VUSG}rX,ЛC NѿעĞ86 Չq1>2=L x┖;{瘝#jxȉΜE įai/,_`|vzI_~aC,(ܛSma38k_!ns9Jw0ĞƔiAt9庨h,d<2Qwf8}ADh;8ErH cw/w词>Gz_c Ťot,?jPqSA)&]K0x|sHD*O@+z~F f ){ayFcv/?/..y=̧~7_M-Q4FFSu8DSԕB)?=Y-8J)uo@ݽC,΄#υ͈ bzc34J^C1@K&KnztYѿujQ~KeéhxJC e孠wVr!D<*tb,E0u̗M;Ծ +"^ }ɤg > !k"ѰI{ѥ[>'jш3įUsFX$zpK$x#,v = +|#bD APB<:fDy=B! 4P!>IBѡ$!D /~=BASy,J@Ѧexq+/,}D  !H7?$ Ko c΅BO#FT~f%4Z۵ ` gu@')F+@ZFbB>X}4Zi )Bfx(n41 aooJy(+"),&šesBNu.B?ٳ IENDB`netspeed_applet-0.16/help/C/figures/ppp.png0000644000175000017500000000111511402462047015616 00000000000000PNG  IHDRabKGDC pHYs  ~tIME )IDATx͓MkQΤ1Ր`"1J FAp-u' ݺ*]WtMvP6`یsufE\x˅CQ@0Eqsv? &57gg_[!!5^Gi]&5, t^wxה1N^͵0_=ppBz{n{=0q@4NDQJMiq{jr?9l @gJ2ʐ| [3fY2]T’b*ɒP zCE|}SK)0"sةS o`DL^L&!*v2hl}AS%5eH /<5Ώvݛ( O=`ńLZ] \ػ>AM(PRn B.' *IENDB`netspeed_applet-0.16/help/C/figures/loopback.png0000644000175000017500000000026311402462047016614 00000000000000PNG  IHDRbwzIDAT8PK  !mr 1}m LtѦz0G ҎK &%l1ըv!% ιDz>x\f@D2m]1j4Svb0_ IENDB`netspeed_applet-0.16/help/C/figures/details.png0000644000175000017500000004606311402462047016457 00000000000000PNG  IHDRc"bKGD pHYs  tIME .9 IDATxLw$[Қ9nN[F;pOU6 (GjtՒVj`;٫BZiZDDDQFYMΜf}03`a~ĀM%!|<DDDDDDDDDDDDDDDD/*"""ObĔCԼ״}Nk󉈈lSQܻ+agrT0a˞Zi{~u?t˚M/|;<#+<^mӯ LX"A3-/ncEDDAfxMDgCC (&xX2Ǫn ^ ?'HFy<3 &)VPDҲ 4WE# vjilm*p޾d.sا{%b`_H$e:9~\!Lf)H'ck`x[6zYz2fmӀ -`]Fh9,7HM@LVLAʜ0$88J|= d;QPDǝ!U.{ E& StgBց291 f+e +k^ƃ!=kΫt6sz2SҦqћ}{w7Wݔ Sz:Pʹ^Tpm {( y0n{QV¢j ngX2bSτ<,("5\9č85hPp_VI'A@jm;Ci{C=τRe^kIcymz}u>Ͷ$3=ծ(g.2+c%{5ŕwjVz/UF\࠹2߸»M";hZx3w{5x h"g} x69;厵.M2hY9  U`TCә(yw&H\$+D;1$&L7;aXCCnwLYF3"x>HL=ЃaŠCp *SvHW~Py;}XG2 ?Zd`mC$ReXN=7:cyZƺyܗ0w=lW@=W(b;mϜDPnOy?6(ezZe֥>0L}{ zʮwb9q>]aXN]Fj6Pv;}jjǨW փ.‰3y󫚹?ne6S`Pk5^<.;v^T|vV=3j/,8L1, ,;8L-&{LI*3_ ybz&4dl;a0dA]GO"4N̗/Ӭ*5P<7bO1q_En3s`-ٙفhyw;V3ӍX@a`ciYHU) ̌;HƇZכh,76 †Qix~YUzjnf.Vޔމ?f%-8OE0J`HdRa#1lvD*}|4t#XIҲh![4^2AYI!H~bȪjM8E{V>33 4l5sq癧*PsiɞN6~3L$:F^aF+7 wm磃.Zz9q+IՁLx\τ>MzO/Q4>y|k5^χ4ǎV@&]LmY`n?27=\Q(#e1X/90M+5a/0/F :cL|Cr' ~'DkK?3nv |7|t"yd jyiG\єHwh,Wc whl%EܭSSeeOdߔ0|3|?GNI-I8eDQHt^f:>.sTl-a;ry+J`fu4r(euy*af~9OL*u>P<{cYg?1Yvc<3u~lX =#݀R7IQо$c<1QFԹ~bd9}Ӝގk=^}b7 O3tqD"J,F*?cvά/ &dA=U4nĽG {r1⭩zz&dK[[?}Zl<Ã?|Myz\Pf9sq:? ;嬣#Ϻ,6?X}`ԓtǿ.{QctAa轑&~ma'"O2,YD֜/],5|ZN-zO扐@xY&敍zeϺl"mQ Q  Q QQ Q  Qľk lc?>aw*""oLܻ+EDD6@쫑 Uoj;EDD [aEDD&[D}[^H*}""" """mÄPwINIWl$I&w)]|u{&0F{+^t:|8FQ2r3ʏU ͘iO]j]>&|5.Q^ NӁ1v抗f\|Cnf̴q }\oB_ 8gkqҲ.8 2jaFh=ҁbSA|cI>Q/ײFt{? kx8P ɉ4c_ NJ(LlNpσ/$X2r)+.6Kn;ݯWr?oűH|ّ. ̳S>6̚bUþ3}ŠRgxZÆ⩬7RqG{}~ȿ\q{txIEnWo{UDDD=fasQwvНdž;mkŭOe\Dre" X]Ǯ2q+0;v=ѫ`Vb$ݣJ(Ll+Ah̹gs4HV jXBqq،-3^B?^k|7YdįzЋ_ =!"" Aj^\0MwbߏC ÿw })lA<FMv,F:'gR'?a{2&M zJL& ,QXOM7^"N3؋Cxc5F9Z:Zo&IF)J{bW=^Stڜ2( 5+A/d_tift:M~Zuτlrеv^6miT gCv<5D.r^PiLZiӆf&X26HL„(L„(L(L„(L„„(L„(L(L„(L„„(L„(L„„(L„(L(Lo k;EDD&Vn\B[]DD):IeQ Q  Q QQ QF^i#(L.H(P-6l!""C=mDam QQMK0!"" 0!""" "+=6sβD֦N(Lȶ/E(DaBDD698(„(L„r麮„Ț=':DEaBDD6!+„(L„lq! p!Գ":$ ":Y# Qg\"" """0!""De U  f^Dl]&DDdRX Q -O(L*Ț7.ξ39VѕygLn<'U`a6c넉s muY//2)֟|= ꅟP^-[!2l;_|U[0!""" """kG7O*L^ ""~„Ț|Y60(ORSYyΰ5+:(fPτSҘ+Hl\~zd֛z&DDd[8+@(L(L,„(LlMVK M "RD&DDDDaBd틈BY(L< y:ˉ """0!""ObO(L,V `0!"":?AGaBDLCFRt  Qݣ0!""`KA 5 j&DȊ"[„CY3۽)LVӠ m؉Bzk{\36m̬]7Wrqj&v]{uX Р@!"򄆉>:ZXZtT(]ޏ?3.:B$Fr"WôSMΈ (P3!""" """0!""" """0!"""0!""" """0!""" """"KZot`nډO{|L(L,R[T&DDn!"""OFpؔWyJD쫑 Uy {&6Lcߨeܻ+(U&DD ]W;|ǎ7}OAɲeBDD0^s 0+g~7}2{Eb#kaE%"Jǎo2$"o0^<?\Xy5/,`dk3}~X(Zڌ""Og`慁|5B +O6wk%e-BE^0TSV7U-Qؐ /g,+QeL<ٽKk,\"$Fxk[qG}Onj}G!"z&Ӱ`LLĽ~z/rH%h;SKp|ݻ+_୪}?3^VsVVSIfeĢ\sfz/-,3~< ܞjgW[N,Jh(\;s^Qfk-t3iy'hjnu)C"z&y X,~XiD]'Ģts|4{fN'I>چGWӴ/usgTBԝZ2os7[P=z%g;o`nP"`M IDATX{40Ly* dϫoz^mB]j]*W.` wBRexK WZ] t&&LX 6$ u=64AI ?jzwn/vza|hU˘ ?/GVN?jViD_⫪b_-n?k\B]BH?HX Gy-}NK(mQW>7w1BYA˶|4_"O 3&0_D#`4߀m?C2GEMX$^Nn:nd_ IeHD܀iZ+A]m[pt bnW)\cXWk*C"$۔%|;f i$jAF/v6LuY+*C"0y#7F7Ol&\eHDd4uv)""0|`#^EDD)=*"""OIϺހuS[XT&DD&Vn;ߝ/*""ۅ.s„(L„(L(L„(L„„(L„pXpy빈„HzW#k>VY xQu30U)z;:@Lcn? Ikt;3/yhw;ܻ7O7qeto06f[$;Jv`Y111EQ4Ҥ6R)br2$t:ur*MzjSSil6" LMM6)IɌ3fN<46l&'c+*^lgQBQq;vdsaR18KJpl wοh"rhGkWDzR5&vKC.7B A>‘}9D xE0Ty,hR,z͏VR7|38(?%OOâsO^/Moݖ۝6+{Ձ-x־?ia(upszL$Ů/΢|+gz}gOw_ xg3<[-LQLI$SR4y-N1.h4ؘFhՖ&ӤҤ;{Ozj ӳ4Rl؋Qb0Jxss'e({=ǟ|9|=s8;(}$M8P0Qk[g_M5n &N}07d|0T6+mexl;穤MkUg5="Lu9H,:L1G9*HN@&=Ei8{ |i}{0s gi.w93>tsubՄ3|'9X|hx;7pF U u|qQy8^c<|4 եQ o?|Rn<"=1I&x &d'&V)ѣ R)&RXI G|ͷ|LpGLJ%|H1Fkz'$ɤhiHOHc#="=6l096;LN`Î-=fF6[ '7]tv5z$@rQVZ[ :o7LǛnZGmks|}vm~tH?MYV}ôQTT̯tЫ=}fo Z7B1d2%0 G>aR /mCxK3z*h͞O"oݖZZO޳Wb9ذ yW݋Xp_/S _LcU%+7:?~bh [fϿ1R)ʞAb v{ %;2{q1vk1EL ي(*{ld?E1l6SY|h˱(g('xEEv`ǎSiv>8AZ6!Vj/wsCY8n[P]OIO%l~֪k~k;g4?oUxn!'V5o9rjo{%7Hxiۙ3QS-v*7-.5|%^{Qqa3]gq7o%z+H4ax+챂[/ci~q.{^~L+-ۏ?/oxFN8?帟u_}_ΟW93tscvtP\lVdg* iRSh~߶h{GJ܍Tէ ^p∏h<*Oo9u ;R-7 sO7[ . s]K _ɲYa᧙2ev0~D|VBY}.5dgyߍ0 K*D}O5kX ~ 3 $pL uꓳ;4ИB)OlAzcn$|vn,1\[uSDDD<[Ly(L„(L„(L(L„(L„„(L„(L(Lܻ+ͺ@15qtyc,. _rnwR{۬UW JK? `: &/v<|hz?ph_-+J:~uz?ia(uplPXB6|?pdX}Qo%|i}{p6#&|w;!́NBӕ|֏;!W@2peǁ e_ӟغ2|%C~hˤbwAòՊmzTEIOe"N8_iڜiή[ >&!;A|g%QfkMPX "Onjr+U_VElO+| mDq_B`s\F>mRˊRa#jY^*h]  ۝bfake'Q*lVzQ?i{RRKVݸ:SCjȵ@.^=NKO7rc˴9=&Vm  gFTB8Y;irFEz;C2Y<͟?~$DV֥+Yβtχ _~_аPn`nBuV|qo,RRKVݸ:]57nOJ1Ca`8 'e(WN/]GMZNu`6n{r$_rmT+gx<=چZh66W0R g:I|ѩ:0C"N/hzSq Wfi+xZ: $㘃AMV+uPf_ q^L(yи}nz 2rXsCV}bmE:o`n\rm"p=? Ԧ$QfkMOF$' Z 3D~ Gt Pu.Y8 \8 R+ ä|'L#/C%d^;|L%;pddsf Ox;mEd|xvZ=]n|*:{?8ޥ^INw \tU;Bu]d{ky-с.i'n_U>u :TasX`pškPZ5Wָo{[S$̕+}8-z3}?aSu)31 V3j;}ߥBcϽ 2V'~7DdS OK\ nbzXi9A,aA"N۩V-V?nL <2e$G\9}"|YM^;Oǭe IL,u6 <F/ ù]Ymoh_Iš;T&x9#>h<=wTAฏag:W䉥rm,*/O0O̕o=i <|}/Qlykva½$^ ybkʋ&6@XXT^3 rQ Q  Q QQ Q,Y IDAT  Q Q ^0PN||"":<1ZL$ #""FǙM9DDDDaBDDD&DDDDaBDDD#VX؃8?$yك1"_FD" ~>L"C+=&=X$;axk_pil0e7Q|} 6}׮K̻8H$F7܋`&C-(s:WEDD[H'="EN(uea2eWSCfH\KuU5DE)W*""D;*SZX5$0 {C4G8-:uM@"1>=*"" ުj,(u=܀u?Bf0{0d,1(n]Rh0,B׻1 Ϟu[F @Q?o7ĞM&/# Fn6gvp4zZQz*ewZRk*k%""[Ƌ?c>vO>LMPOZDA;Mv3$z2mz~d=Ga SP-)s8J3?UUUyP cǰL,Gb3U{+qԾ}!sdZ3tIO'c ~Qΰuk>J3 so { SLq#voC۸0 ș&@$fyCً!sVXS" }QD^/͠KV v^4/B/ =Ȱ @ i-Ul)$ˮXCgw=&:#d8K˅]էVC`Y/al0Rx0MÆA͕GuFd13D&=Ofdn8}r1kf8wuYN6R1o?l7%u[_aIoVX[&LrJ`ySM[]ק aus7!dq|ٍu+8C&!P:j[ R_,3qVI-67/a"y3EvJL6a[-ៅR g[=7Z_bkJ0>v~]ק "s ӠL&?`2$fnOᥗ 7n%mb =#dPm!wUܬڊ2!"UąU?8C[ٗPԭ[z:_[7␯t֜:I߉a c~vM'QYܻ;M<X]ЉwYyS12~˹Ӄ`˻-9˲Z~cW!5]-Z׫lunD!)H/ 0qO'vę2ܙI&?A4=G-BЮQwF?`e#Ls h7X*"]̝ aYX}Sthnp0~& Σu#Uy 7KI󕎟Cc,=vi}0aK:xp#BϏ0|~` ӸO쬇Y~N4x>NX/C098|0t:Jh μA}KEDo/"Q} 2;=4g87 2|zúlDH?C,ܻV3JgiRu}z|u{ xZ,ɮoLtdֳL}=7Hߞd`j{yx8OIb!t"Ld y>I~w }^g{t3:cڛ}Kް}oem܏ x^&o~^P~ᚕThv%"{(քzM ͋yWl2Op~L[\{&6Du &Mo8\~s z$lft^h?l*d Z5BhW(F [&WzAb3d(L„(L0:*PlN2Q/H@VCaBDZaQx!ՂۃJiݾP(v2Q$P:a@]Pi0xu1P(Zi?\$|m+L„„Dk>< Z}̙3GVǏ߼yarpp lNύ3g΄pO??3kYXnB?#?'&'&kfU]e/OO667/_{yy} z@bZZ ߿~ǰ /__o^}=ဟA_Ed``xڅE%޽~(%L3gLLLp)joonÇ56GGGbw~JJztt7lXwYmw+))gå>lggK[?߽{wii)Xe3D!UT)))َǖK.Y͟(""RX-$?a``ؿe˩涢|m033:z˗LL,յ33s>~ˊݻ'6%&&I}nҤ)FF߿O:cmmPXX\TTxƕ5kV^xjcG{ePP VM>sXe߿ݻ322644WUN: S Oh|]]幀ڵ+!gϩ100ppp|7RiZSSĄ];TTTrrrU 44۷Y愇"{rBzzjmmZf``9sG}-,wE5?_v=22RbVSLWSS-sbUzu6̞=,_jjٳ07o ζVUR388MLq53B[Z>~6ggR222WXx30e?<{\ee%?޽{"Wp߿?Tx)23(}?;:Zq\zEDD_sdɐBԄr''Ǐ+))M?<*+kTUGP93F=G ]>
&applet; Manual V&manrevision; &applet; is shows how much traffic occurs on a specified network device. 2002 Jörgen Scheibengruber GNOME Documentation Project &legal; Jörgen Scheibengruber GNOME Project mfcn@gmx.de Pedro Villavicencio Garrido GNOME Project pvillavi@gnome.org 1.2 2006 Jörgen Scheibengruber mfcn@gmx.de 1.1 2005 Pedro Villavicencio Garrido pvillavi@gnome.org 1.0 2002 Jörgen Scheibengruber mfcn@gmx.de This manual describes version &appletversion; of &applet;. Feedback To report a bug or make a suggestion regarding the &applet; applet or this manual, send a e-mail to Jörgen Scheibengruber. &applet; About &applet;
Netspeed Netspeed.
Netspeed showing the sum in a 48px panel. Netspeed showing the sum in a 48px panel.
&applet; displays the network traffic on a specified device like eth0, ppp0, plip0, etc. More over it provides information about the configuration of the network device. Netspeed Icons on Panel Icon Description Loopback The Loopback interface. Ethernet Ethernet connection. PPP Point to Point Protocol connection. Wireless Wireless connection. PLIP Parallel Line Internet Protocol connection. To Add Netspeed to a Panel To add &applet; to a panel, right-click on the panel, then choose Add to Panel Network &applet; . Settings
&applet; Settings &applet; Settings.
In this dialog you can change the settings of &applet;: Network device: Choose the network device that the applet should monitor from the popdown list of the combobox. Usually all available devices are listed, however you can enter one yourself, too. Update interval: Enter the time between two updates of the applet. Label font size: Enter the size of the text displayed in the applet. Show sum instead of in and out: If you check this box then the applet will show the sum of the in and out rate. The applet will take only half of the space in the panel in this case. Show bits/s (b/s) instead of bytes/s (B/s): Check this if you want the applet to display bits per second instead of bytes/s. Change icon according to the selected device: Usually the applet will show an icon representing the type of network device you monitor. So it will show a phone for Point to Point connections (ppp - modems, etc.), a network card for ethernet (eth), etc. When this is unchecked, the applet will always show the network card icon, no matter which device you monitor. Always monitor a connected device, if possible: When your connection is down, &applet; look for a running one for monitoring. The details dialog
The details dialog The details dialog
This dialog shows you some useful information on the configuration of your network device. Internet Address: The IP (Internet Protocol) address of the network device. Netmask: The netmask which depends on the size of your LAN (Local Area Network). A usual value is 255.255.255.0 (a class C network). Hardware Address: Often also referred to as the physical or MAC (Media Access Control) address. A worldwide unique identifier for your network card. P-t-P Address: The internet address of the "other side" of your PPP (Point to Point Protocol) connection. Bytes in: The amount of bytes that the network device has received since it has been connected to the network. Bytes out: The amout of bytes that the network device has sent since it has been connected to the network.
netspeed_applet-0.16/help/C/legal.xml0000644000175000017500000000713011402462045014454 00000000000000 Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License (GFDL), Version 1.1 or any later version published by the Free Software Foundation with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. You can find a copy of the GFDL at this link or in the file COPYING-DOCS distributed with this manual. This manual is part of a collection of GNOME manuals distributed under the GFDL. If you want to distribute this manual separately from the collection, you can do so by adding a copy of the license to the manual, as described in section 6 of the license. Many of the names used by companies to distinguish their products and services are claimed as trademarks. Where those names appear in any GNOME documentation, and the members of the GNOME Documentation Project are made aware of those trademarks, then the names are in capital letters or initial capital letters. DOCUMENT AND MODIFIED VERSIONS OF THE DOCUMENT ARE PROVIDED UNDER THE TERMS OF THE GNU FREE DOCUMENTATION LICENSE WITH THE FURTHER UNDERSTANDING THAT: DOCUMENT IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES THAT THE DOCUMENT OR MODIFIED VERSION OF THE DOCUMENT IS FREE OF DEFECTS MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE OR NON-INFRINGING. THE ENTIRE RISK AS TO THE QUALITY, ACCURACY, AND PERFORMANCE OF THE DOCUMENT OR MODIFIED VERSION OF THE DOCUMENT IS WITH YOU. SHOULD ANY DOCUMENT OR MODIFIED VERSION PROVE DEFECTIVE IN ANY RESPECT, YOU (NOT THE INITIAL WRITER, AUTHOR OR ANY CONTRIBUTOR) ASSUME THE COST OF ANY NECESSARY SERVICING, REPAIR OR CORRECTION. THIS DISCLAIMER OF WARRANTY CONSTITUTES AN ESSENTIAL PART OF THIS LICENSE. NO USE OF ANY DOCUMENT OR MODIFIED VERSION OF THE DOCUMENT IS AUTHORIZED HEREUNDER EXCEPT UNDER THIS DISCLAIMER; AND UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, WHETHER IN TORT (INCLUDING NEGLIGENCE), CONTRACT, OR OTHERWISE, SHALL THE AUTHOR, INITIAL WRITER, ANY CONTRIBUTOR, OR ANY DISTRIBUTOR OF THE DOCUMENT OR MODIFIED VERSION OF THE DOCUMENT, OR ANY SUPPLIER OF ANY OF SUCH PARTIES, BE LIABLE TO ANY PERSON FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF GOODWILL, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, OR ANY AND ALL OTHER DAMAGES OR LOSSES ARISING OUT OF OR RELATING TO USE OF THE DOCUMENT AND MODIFIED VERSIONS OF THE DOCUMENT, EVEN IF SUCH PARTY SHALL HAVE BEEN INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. netspeed_applet-0.16/help/Makefile.am0000644000175000017500000000103311402426203014510 00000000000000include $(top_srcdir)/gnome-doc-utils.make dist-hook: doc-dist-hook DOC_MODULE = netspeed_applet DOC_ENTITIES = legal.xml DOC_INCLUDES = DOC_FIGURES = \ figures/details.png \ figures/ethernet.png \ figures/eth_sum_48.png \ figures/loopback.png \ figures/netspeed_applet.png \ figures/plip.png \ figures/ppp.png \ figures/settings.png \ figures/wavelan.png DOC_LINGUAS = cs de el es fr pt_BR sv # Migration needed (see INSTRUCTIONS http://live.gnome.org/GnomeDocUtilsTranslationMigration) # DOC_LINGUAS = ru # EXTRA_DIST = INSTRUCTIONS netspeed_applet-0.16/help/es/0000755000175000017500000000000011402462046013153 500000000000000netspeed_applet-0.16/help/es/es.po0000644000175000017500000005310411402462046014045 00000000000000# translation of netspeed.help.HEAD.po to Español # Jorge González , 2008, 2010. msgid "" msgstr "" "Project-Id-Version: netspeed.help.HEAD\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2008-03-04 18:48+0000\n" "PO-Revision-Date: 2010-02-18 09:00+0100\n" "Last-Translator: Jorge González \n" "Language-Team: Español \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.11.4\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" #. When image changes, this message will be marked fuzzy or untranslated for you. #. It doesn't matter what you translate it to: it's not used at all. #: C/netspeed_applet.xml:132(None) msgid "" "@@image: 'figures/netspeed_applet.png'; md5=11ef0533a2be1a5d1a9de77c4cec7f93" msgstr "" "@@image: 'figures/netspeed_applet.png'; md5=11ef0533a2be1a5d1a9de77c4cec7f93" #. When image changes, this message will be marked fuzzy or untranslated for you. #. It doesn't matter what you translate it to: it's not used at all. #: C/netspeed_applet.xml:144(None) msgid "@@image: 'figures/eth_sum_48.png'; md5=5113ce28da9b7712dafc52b3c13ccf32" msgstr "" "@@image: 'figures/eth_sum_48.png'; md5=5113ce28da9b7712dafc52b3c13ccf32" #. When image changes, this message will be marked fuzzy or untranslated for you. #. It doesn't matter what you translate it to: it's not used at all. #: C/netspeed_applet.xml:173(None) msgid "@@image: 'figures/loopback.png'; md5=0636b7d65b0626ee5e92dc0d28be5871" msgstr "@@image: 'figures/loopback.png'; md5=0636b7d65b0626ee5e92dc0d28be5871" #. When image changes, this message will be marked fuzzy or untranslated for you. #. It doesn't matter what you translate it to: it's not used at all. #: C/netspeed_applet.xml:185(None) msgid "@@image: 'figures/ethernet.png'; md5=48562a8b38e8eca91a3a8ee4ba4e3077" msgstr "@@image: 'figures/ethernet.png'; md5=48562a8b38e8eca91a3a8ee4ba4e3077" #. When image changes, this message will be marked fuzzy or untranslated for you. #. It doesn't matter what you translate it to: it's not used at all. #: C/netspeed_applet.xml:197(None) msgid "@@image: 'figures/ppp.png'; md5=b88d98a9ccdd489d91b45c8cf2dcbad1" msgstr "@@image: 'figures/ppp.png'; md5=b88d98a9ccdd489d91b45c8cf2dcbad1" #. When image changes, this message will be marked fuzzy or untranslated for you. #. It doesn't matter what you translate it to: it's not used at all. #: C/netspeed_applet.xml:209(None) msgid "@@image: 'figures/wavelan.png'; md5=90f925a64abe393adc5834fceba515fe" msgstr "@@image: 'figures/wavelan.png'; md5=90f925a64abe393adc5834fceba515fe" #. When image changes, this message will be marked fuzzy or untranslated for you. #. It doesn't matter what you translate it to: it's not used at all. #: C/netspeed_applet.xml:221(None) msgid "@@image: 'figures/plip.png'; md5=0761a22dfa7b0b56e41e020cd701db68" msgstr "@@image: 'figures/plip.png'; md5=0761a22dfa7b0b56e41e020cd701db68" #. When image changes, this message will be marked fuzzy or untranslated for you. #. It doesn't matter what you translate it to: it's not used at all. #: C/netspeed_applet.xml:249(None) msgid "@@image: 'figures/settings.png'; md5=219a6bc0e89cb9634d49025f9d3c6604" msgstr "@@image: 'figures/settings.png'; md5=219a6bc0e89cb9634d49025f9d3c6604" #. When image changes, this message will be marked fuzzy or untranslated for you. #. It doesn't matter what you translate it to: it's not used at all. #: C/netspeed_applet.xml:296(None) msgid "@@image: 'figures/details.png'; md5=60fedda8f88b634f16ab31090b5bdd67" msgstr "@@image: 'figures/details.png'; md5=60fedda8f88b634f16ab31090b5bdd67" #: C/netspeed_applet.xml:24(title) msgid "Netspeed Applet Manual V1.1" msgstr "Manual de Netspeed v1.1" #: C/netspeed_applet.xml:26(para) msgid "" "Netspeed Applet is shows how much traffic occurs on a specified network " "device." msgstr "" "La miniaplicación Netspeed le muestra la cantidad de tráfico que transcurre " "por un dispositivo de red determinado." #: C/netspeed_applet.xml:29(year) C/netspeed_applet.xml:102(date) msgid "2002" msgstr "2002" #: C/netspeed_applet.xml:30(holder) msgid "Jörgen Scheibengruber" msgstr "Jörgen Scheibengruber" #: C/netspeed_applet.xml:41(publishername) msgid "GNOME Documentation Project" msgstr "Proyecto de documentación de GNOME" #: C/netspeed_applet.xml:2(para) msgid "" "Permission is granted to copy, distribute and/or modify this document under " "the terms of the GNU Free Documentation License (GFDL), Version 1.1 or any " "later version published by the Free Software Foundation with no Invariant " "Sections, no Front-Cover Texts, and no Back-Cover Texts. You can find a copy " "of the GFDL at this link or " "in the file COPYING-DOCS distributed with this manual." msgstr "" "Se concede autorización para copiar, distribuir o modificar este documento " "según los términos de la GFDL (GNU Free Documentation Licence), Versión 1.1, " "o cualquier otra versión posterior publicada por Free Software Foundation " "sin secciones invariables, textos de portada ni textos de contraportada. " "Podrá encontrar una copia de la GFDL en este enlace o en el archivo COPYING-DOCS distribuido con " "este manual." #: C/netspeed_applet.xml:12(para) msgid "" "This manual is part of a collection of GNOME manuals distributed under the " "GFDL. If you want to distribute this manual separately from the collection, " "you can do so by adding a copy of the license to the manual, as described in " "section 6 of the license." msgstr "" "Este manual es parte de una colección de manuales de GNOME distribuido bajo " "la GFDL. Si quiere distribuir este manual por separado de la colección, " "puede hacerlo añadiendo una copia de la licencia al manual, tal como se " "describe en la sección 6 de la licencia." #: C/netspeed_applet.xml:19(para) msgid "" "Many of the names used by companies to distinguish their products and " "services are claimed as trademarks. Where those names appear in any GNOME " "documentation, and the members of the GNOME Documentation Project are made " "aware of those trademarks, then the names are in capital letters or initial " "capital letters." msgstr "" "Muchos de los nombres usados por compañías para distinguir sus productos y " "servicios son mencionados como marcas comerciales. Donde esos nombres " "aparezcan en cualquier documentación de GNOME, y los miembros del Proyecto " "de Documentación de GNOME están al corriente de esas marcas comerciales, " "entonces los nombres se pondrán en mayúsculas o con la inicial en mayúsculas." #: C/netspeed_applet.xml:35(para) msgid "" "DOCUMENT IS PROVIDED ON AN \"AS IS\" BASIS, WITHOUT WARRANTY OF ANY KIND, " "EITHER EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES THAT " "THE DOCUMENT OR MODIFIED VERSION OF THE DOCUMENT IS FREE OF DEFECTS " "MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE OR NON-INFRINGING. THE ENTIRE " "RISK AS TO THE QUALITY, ACCURACY, AND PERFORMANCE OF THE DOCUMENT OR " "MODIFIED VERSION OF THE DOCUMENT IS WITH YOU. SHOULD ANY DOCUMENT OR " "MODIFIED VERSION PROVE DEFECTIVE IN ANY RESPECT, YOU (NOT THE INITIAL " "WRITER, AUTHOR OR ANY CONTRIBUTOR) ASSUME THE COST OF ANY NECESSARY " "SERVICING, REPAIR OR CORRECTION. THIS DISCLAIMER OF WARRANTY CONSTITUTES AN " "ESSENTIAL PART OF THIS LICENSE. NO USE OF ANY DOCUMENT OR MODIFIED VERSION " "OF THE DOCUMENT IS AUTHORIZED HEREUNDER EXCEPT UNDER THIS DISCLAIMER; AND" msgstr "" "EL DOCUMENTO SE ENTREGA «TAL CUAL», SIN GARANTÍA DE NINGÚN TIPO, NI EXPLÍCITA " "NI IMPLÍCITA INCLUYENDO, SIN LIMITACIÓN, GARANTÍA DE QUE EL DOCUMENTO O " "VERSIÓN MODIFICADA DE ÉSTE CAREZCA DE DEFECTOS EN EL MOMENTO DE SU VENTA, " "SEA ADECUADO A UN FIN CONCRETO O INCUMPLA ALGUNA NORMATIVA. TODO EL RIESGO " "RELATIVO A LA CALIDAD, PRECISIÓN Y UTILIDAD DEL DOCUMENTO O SU VERSIÓN " "MODIFICADA RECAE EN USTED. SI CUALQUIER DOCUMENTO O VERSIÓN MODIFICADA DE " "AQUÉL RESULTARA DEFECTUOSO EN CUALQUIER ASPECTO, USTED (Y NO EL REDACTOR " "INICIAL, AUTOR O AUTOR DE APORTACIONES) ASUMIRÁ LOS COSTES DE TODA " "REPARACIÓN, MANTENIMIENTO O CORRECCIÓN NECESARIOS. ESTA EXENCIÓN DE " "RESPONSABILIDAD SOBRE LA GARANTÍA ES UNA PARTE ESENCIAL DE ESTA LICENCIA. NO " "SE AUTORIZA EL USO DE NINGÚN DOCUMENTO NI VERSIÓN MODIFICADA DE ÉSTE POR EL " "PRESENTE, SALVO DENTRO DEL CUMPLIMIENTO DE LA EXENCIÓN DE RESPONSABILIDAD;Y" #: C/netspeed_applet.xml:55(para) msgid "" "UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, WHETHER IN TORT (INCLUDING " "NEGLIGENCE), CONTRACT, OR OTHERWISE, SHALL THE AUTHOR, INITIAL WRITER, ANY " "CONTRIBUTOR, OR ANY DISTRIBUTOR OF THE DOCUMENT OR MODIFIED VERSION OF THE " "DOCUMENT, OR ANY SUPPLIER OF ANY OF SUCH PARTIES, BE LIABLE TO ANY PERSON " "FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF " "ANY CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF GOODWILL, " "WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, OR ANY AND ALL OTHER DAMAGES " "OR LOSSES ARISING OUT OF OR RELATING TO USE OF THE DOCUMENT AND MODIFIED " "VERSIONS OF THE DOCUMENT, EVEN IF SUCH PARTY SHALL HAVE BEEN INFORMED OF THE " "POSSIBILITY OF SUCH DAMAGES." msgstr "" "BAJO NINGUNA CIRCUNSTANCIA NI BAJO NINGUNA TEORÍA LEGAL, SEA POR ERROR " "(INCLUYENDO NEGLIGENCIA), CONTRATO O DE ALGÚN OTRO MODO, EL AUTOR, EL " "ESCRITOR INICIAL, CUALQUIER CONTRIBUIDOR, O CUALQUIER DISTRIBUIDOR DEL " "DOCUMENTO O VERSIÓN MODIFICADA DEL DOCUMENTO, O CUALQUIER PROVEEDOR DE " "CUALQUIERA DE ESAS PARTES, SERÁ RESPONSABLE ANTE NINGUNA PERSONA POR NINGÚN " "DAÑO DIRECTO, INDIRECTO, ESPECIAL, INCIDENTAL O DERIVADO DE NINGÚN TIPO, " "INCLUYENDO, SIN LIMITACIÓN DAÑOS POR PÉRDIDA DE MERCANCÍAS, PARO TÉCNICO, " "FALLO INFORMÁTICO O MAL FUNCIONAMIENTO O CUALQUIER OTRO POSIBLE DAÑO O " "PÉRDIDAS DERIVADAS O RELACIONADAS CON EL USO DEL DOCUMENTO O SUS VERSIONES " "MODIFICADAS, AUNQUE DICHA PARTE HAYA SIDO INFORMADA DE LA POSIBILIDAD DE QUE " "SE PRODUJESEN DICHOS DAÑOS." #: C/netspeed_applet.xml:28(para) msgid "" "DOCUMENT AND MODIFIED VERSIONS OF THE DOCUMENT ARE PROVIDED UNDER THE TERMS " "OF THE GNU FREE DOCUMENTATION LICENSE WITH THE FURTHER UNDERSTANDING THAT: " "" msgstr "" "ESTE DOCUMENTO Y LAS VERSIONES MODIFICADAS DEL MISMO SE PROPORCIONAN SEGÚN " "LAS CONDICIONES ESTABLECIDAS EN LA LICENCIA DE DOCUMENTACIÓN LIBRE DE GNU " "(GFDL) Y TENIENDO EN CUENTA QUE: " #: C/netspeed_applet.xml:48(firstname) C/netspeed_applet.xml:84(firstname) #: C/netspeed_applet.xml:104(firstname) msgid "Jörgen" msgstr "Jörgen" #: C/netspeed_applet.xml:49(surname) C/netspeed_applet.xml:85(surname) #: C/netspeed_applet.xml:105(surname) msgid "Scheibengruber" msgstr "Scheibengruber" #: C/netspeed_applet.xml:51(orgname) C/netspeed_applet.xml:60(orgname) msgid "GNOME Project" msgstr "Proyecto GNOME" #: C/netspeed_applet.xml:53(email) C/netspeed_applet.xml:86(email) #: C/netspeed_applet.xml:106(email) msgid "mfcn@gmx.de" msgstr "mfcn@gmx.de" #: C/netspeed_applet.xml:57(firstname) C/netspeed_applet.xml:94(firstname) msgid "Pedro" msgstr "Pedro" #: C/netspeed_applet.xml:58(surname) C/netspeed_applet.xml:95(surname) msgid "Villavicencio Garrido" msgstr "Villavicencio Garrido" #: C/netspeed_applet.xml:62(email) C/netspeed_applet.xml:96(email) msgid "pvillavi@gnome.org" msgstr "pvillavi@gnome.org" #: C/netspeed_applet.xml:81(revnumber) msgid "1.2" msgstr "1.2" #: C/netspeed_applet.xml:82(date) msgid "2006" msgstr "2006" #: C/netspeed_applet.xml:91(revnumber) msgid "1.1" msgstr "1.1" #: C/netspeed_applet.xml:92(date) msgid "2005" msgstr "2005" #: C/netspeed_applet.xml:101(revnumber) msgid "1.0" msgstr "1.0" #: C/netspeed_applet.xml:112(releaseinfo) msgid "This manual describes version 0.12 of Netspeed Applet." msgstr "Este manual describa la versión 0.12 de la miniaplicación Netspeed." #: C/netspeed_applet.xml:115(title) msgid "Feedback" msgstr "Comentarios" #: C/netspeed_applet.xml:116(para) msgid "" "To report a bug or make a suggestion regarding the Netspeed Applet applet or " "this manual, send a e-mail to Jörgen Scheibengruber." msgstr "" "Para informar de un error o hacer una sugerencia respecto a la " "miniaplicación Netspeed o este manual, envíe un correo-e a Jörgen Scheibengruber." #: C/netspeed_applet.xml:122(primary) msgid "Netspeed Applet" msgstr "Applet netspeed" #: C/netspeed_applet.xml:127(title) msgid "About Netspeed Applet" msgstr "Acerca de la miniaplicación Netspeed" #: C/netspeed_applet.xml:129(title) msgid "Netspeed" msgstr "Netspeed" #: C/netspeed_applet.xml:135(phrase) msgid "Netspeed." msgstr "Netspeed." #: C/netspeed_applet.xml:141(title) C/netspeed_applet.xml:147(phrase) msgid "Netspeed showing the sum in a 48px panel." msgstr "Netspeed mostrando el total en un panel de 48px." #: C/netspeed_applet.xml:152(para) msgid "" "Netspeed Applet displays the network traffic on a " "specified device like eth0, ppp0, plip0, etc. More over it provides " "information about the configuration of the network device." msgstr "" "La miniaplicación Netspeed muestra el tráfico de " "la red de un dispositivo de red concreto como eth0, ppp0, plip0, etc. Además " "de esto, proporciona información acerca de la configuración de la interfaz " "de red." #: C/netspeed_applet.xml:158(title) msgid "Netspeed Icons on Panel" msgstr "Icono de Netspeed en el panel" #: C/netspeed_applet.xml:165(para) msgid "Icon" msgstr "Icono" #: C/netspeed_applet.xml:166(para) msgid "Description" msgstr "Descripción" #: C/netspeed_applet.xml:175(phrase) msgid "Loopback" msgstr "Loopback" #: C/netspeed_applet.xml:178(para) msgid "The Loopback interface." msgstr "Interfaz de loopback." #: C/netspeed_applet.xml:187(phrase) msgid "Ethernet" msgstr "Ethernet" #: C/netspeed_applet.xml:190(para) msgid "Ethernet connection." msgstr "Conexión ethernet." #: C/netspeed_applet.xml:199(phrase) msgid "PPP" msgstr "PPP" #: C/netspeed_applet.xml:202(para) msgid "Point to Point Protocol connection." msgstr "Protocolo de conexión punto a punto." #: C/netspeed_applet.xml:211(phrase) msgid "Wireless" msgstr "Inalámbrico" #: C/netspeed_applet.xml:214(para) msgid "Wireless connection." msgstr "Conexión inalámbrica." #: C/netspeed_applet.xml:223(phrase) msgid "PLIP" msgstr "PLIP" #: C/netspeed_applet.xml:226(para) msgid "Parallel Line Internet Protocol connection." msgstr "Conexión de protocolo de línea paralela de Internet." #: C/netspeed_applet.xml:235(title) msgid "To Add Netspeed to a Panel" msgstr "Para añadir Netspeed a un panel" #: C/netspeed_applet.xml:236(para) msgid "" "To add Netspeed Applet to a panel, right-click on " "the panel, then choose Add to PanelNetworkNetspeed Applet." msgstr "" "Para añadir la miniaplicación Netspeed a un " "panel, pulse con el botón derecho sobre el panel y seleccione " "Añadir al panelRedminiaplicación Netspeed." #: C/netspeed_applet.xml:244(title) msgid "Settings" msgstr "Configuración" #: C/netspeed_applet.xml:246(title) msgid "Netspeed Applet Settings" msgstr "Configuración de la miniaplicación Netspeed" #: C/netspeed_applet.xml:252(phrase) msgid "Netspeed Applet Settings." msgstr "Configuración de la miniaplicación Netspeed." #: C/netspeed_applet.xml:257(para) msgid "In this dialog you can change the settings of Netspeed Applet:" msgstr "" "En este diálogo puede cambiar la configuración de la miniaplicación Netspeed:" #: C/netspeed_applet.xml:261(para) msgid "" "Network device: Choose the network device that the " "applet should monitor from the popdown list of the combobox. Usually all " "available devices are listed, however you can enter one yourself, too." msgstr "" "Dispositivo de red: Seleccione el dispositivo de red " "que la miniaplicación debe monitorizar en la lista desplegable de la caja " "combinada. Habitualmente se muestran todos los dispositivos disponibles, " "pero también puede introducir uno usted mismo." #: C/netspeed_applet.xml:265(para) msgid "" "Update interval: Enter the time between two updates of " "the applet." msgstr "" "Intervalo de actualización: Introduzca el tiempo entre " "dos actualizaciones de la miniaplicación." #: C/netspeed_applet.xml:268(para) msgid "" "Label font size: Enter the size of the text displayed " "in the applet." msgstr "" "Tamaño de la tipografía: Introduzca el tamaño del texto " "mostrado en la miniaplicación." #: C/netspeed_applet.xml:271(para) msgid "" "Show sum instead of in and out: If you check this box " "then the applet will show the sum of the in and out rate. The applet will " "take only half of the space in the panel in this case." msgstr "" "Muestra el total en lugar de bajada y subida: Si " "selecciona esta casilla la miniaplicación mostrará la tasa total de bajada y " "subida. La miniaplicación sólo ocupara la mitad de espacio en el panel en " "este caso." #: C/netspeed_applet.xml:275(para) msgid "" "Show bits/s (b/s) instead of bytes/s (B/s): Check this " "if you want the applet to display bits per second instead of bytes/s." msgstr "" "Mostrar bits en lugar de bytes/s: Seleccione esta " "casilla si quiere que la miniaplicación muestre bits por segundo en lugar de " "bytes/s." #: C/netspeed_applet.xml:279(para) msgid "" "Change icon according to the selected device: Usually " "the applet will show an icon representing the type of network device you " "monitor. So it will show a phone for Point to Point connections (ppp - " "modems, etc.), a network card for ethernet (eth), etc. When this is " "unchecked, the applet will always show the network card icon, no matter " "which device you monitor." msgstr "" "Cambiar icono según el dispositivo seleccionado: " "Habitualmente la miniaplicación muestra un icono que representa el tipo de " "dispositivo que red que monitoriza. Así pues, mostraŕa un teléfono para " "conexiones Punto a Punto (ppp - módems, etc), una tarjeta de red para " "ethernet (eth), etc. Cuando esto no está seleccionado, la miniaplicación " "siempre mostrará el icono de la tarjeta de red, sin importar el tipo de " "dispositivo que monitoriza." #: C/netspeed_applet.xml:285(para) msgid "" "Always monitor a connected device, if possible: When " "your connection is down, Netspeed Applet look for a running one for " "monitoring." msgstr "" "Monitorizar siempre un dispositivo conectado si es posible: Cuando su conexión está desconfigurada, Netspeed busca una para " "monitorizarla." #: C/netspeed_applet.xml:291(title) C/netspeed_applet.xml:293(title) #: C/netspeed_applet.xml:299(phrase) msgid "The details dialog" msgstr "El diálogo detalles" #: C/netspeed_applet.xml:304(para) msgid "" "This dialog shows you some useful information on the configuration of your " "network device." msgstr "" "Este diálogo le muestra información útil sobre la configuración de su " "dispositivo de red." #: C/netspeed_applet.xml:309(para) msgid "" "Internet Address: The IP (Internet Protocol) address of " "the network device." msgstr "" "Dirección de Internet: La dirección IP (Protocolo de " "Internet) del dispositivo de red." #: C/netspeed_applet.xml:312(para) msgid "" "Netmask: The netmask which depends on the size of your " "LAN (Local Area Network). A usual value is 255.255.255.0 (a class C network)." msgstr "" "Máscara de red: La máscara de red que depende del " "tamaño de su LAN (Red de Área Local). Un valor típico es 255.255.255.0 (red " "de clase C)." #: C/netspeed_applet.xml:316(para) msgid "" "Hardware Address: Often also referred to as the " "physical or MAC (Media Access Control) address. A worldwide unique " "identifier for your network card." msgstr "" "Dirección hardware: También denominada habitualmente " "dirección física o dirección MAC (Control de Acceso al Medio). Un " "identificador único en el mundo para su tarjeta de red." #: C/netspeed_applet.xml:320(para) msgid "" "P-t-P Address: The internet address of the \"other side" "\" of your PPP (Point to Point Protocol) connection." msgstr "" "Dirección Punto-a-Punto: La dirección de internet de «la " "otra parte» de su conexión PPP (protocolo Punto a Punto)." #: C/netspeed_applet.xml:324(para) msgid "" "Bytes in: The amount of bytes that the network device " "has received since it has been connected to the network." msgstr "" "Bytes de bajada: El total de bytes que el dispositivo " "de red ha recibido desde que se ha conectado a la red." #: C/netspeed_applet.xml:328(para) msgid "" "Bytes out: The amout of bytes that the network device " "has sent since it has been connected to the network." msgstr "" "Bytes de subida: El total de bytes que el dispositivo " "de red ha enviado desde que se ha conectado a la red." #. Put one translator per line, in the form of NAME , YEAR1, YEAR2. #: C/netspeed_applet.xml:0(None) msgid "translator-credits" msgstr "" "Daniel Mustieles García , 2008.\n" "QA: Jorge González , 2008, 2010." netspeed_applet-0.16/help/es/netspeed_applet.xml0000644000175000017500000003443111402462045016775 00000000000000 ]>
Manual de Netspeed v1.1 La miniaplicación Netspeed le muestra la cantidad de tráfico que transcurre por un dispositivo de red determinado. 2002 Jörgen Scheibengruber 2008.Daniel Mustieles García (daniel.mustieles@gmail.com)2008, 2010.QA: Jorge González (jorgegonz@svn.gnome.org) Proyecto de documentación de GNOME Se concede autorización para copiar, distribuir o modificar este documento según los términos de la GFDL (GNU Free Documentation Licence), Versión 1.1, o cualquier otra versión posterior publicada por Free Software Foundation sin secciones invariables, textos de portada ni textos de contraportada. Podrá encontrar una copia de la GFDL en este enlace o en el archivo COPYING-DOCS distribuido con este manual. Este manual es parte de una colección de manuales de GNOME distribuido bajo la GFDL. Si quiere distribuir este manual por separado de la colección, puede hacerlo añadiendo una copia de la licencia al manual, tal como se describe en la sección 6 de la licencia. Muchos de los nombres usados por compañías para distinguir sus productos y servicios son mencionados como marcas comerciales. Donde esos nombres aparezcan en cualquier documentación de GNOME, y los miembros del Proyecto de Documentación de GNOME están al corriente de esas marcas comerciales, entonces los nombres se pondrán en mayúsculas o con la inicial en mayúsculas. ESTE DOCUMENTO Y LAS VERSIONES MODIFICADAS DEL MISMO SE PROPORCIONAN SEGÚN LAS CONDICIONES ESTABLECIDAS EN LA LICENCIA DE DOCUMENTACIÓN LIBRE DE GNU (GFDL) Y TENIENDO EN CUENTA QUE: EL DOCUMENTO SE ENTREGA «TAL CUAL», SIN GARANTÍA DE NINGÚN TIPO, NI EXPLÍCITA NI IMPLÍCITA INCLUYENDO, SIN LIMITACIÓN, GARANTÍA DE QUE EL DOCUMENTO O VERSIÓN MODIFICADA DE ÉSTE CAREZCA DE DEFECTOS EN EL MOMENTO DE SU VENTA, SEA ADECUADO A UN FIN CONCRETO O INCUMPLA ALGUNA NORMATIVA. TODO EL RIESGO RELATIVO A LA CALIDAD, PRECISIÓN Y UTILIDAD DEL DOCUMENTO O SU VERSIÓN MODIFICADA RECAE EN USTED. SI CUALQUIER DOCUMENTO O VERSIÓN MODIFICADA DE AQUÉL RESULTARA DEFECTUOSO EN CUALQUIER ASPECTO, USTED (Y NO EL REDACTOR INICIAL, AUTOR O AUTOR DE APORTACIONES) ASUMIRÁ LOS COSTES DE TODA REPARACIÓN, MANTENIMIENTO O CORRECCIÓN NECESARIOS. ESTA EXENCIÓN DE RESPONSABILIDAD SOBRE LA GARANTÍA ES UNA PARTE ESENCIAL DE ESTA LICENCIA. NO SE AUTORIZA EL USO DE NINGÚN DOCUMENTO NI VERSIÓN MODIFICADA DE ÉSTE POR EL PRESENTE, SALVO DENTRO DEL CUMPLIMIENTO DE LA EXENCIÓN DE RESPONSABILIDAD;Y BAJO NINGUNA CIRCUNSTANCIA NI BAJO NINGUNA TEORÍA LEGAL, SEA POR ERROR (INCLUYENDO NEGLIGENCIA), CONTRATO O DE ALGÚN OTRO MODO, EL AUTOR, EL ESCRITOR INICIAL, CUALQUIER CONTRIBUIDOR, O CUALQUIER DISTRIBUIDOR DEL DOCUMENTO O VERSIÓN MODIFICADA DEL DOCUMENTO, O CUALQUIER PROVEEDOR DE CUALQUIERA DE ESAS PARTES, SERÁ RESPONSABLE ANTE NINGUNA PERSONA POR NINGÚN DAÑO DIRECTO, INDIRECTO, ESPECIAL, INCIDENTAL O DERIVADO DE NINGÚN TIPO, INCLUYENDO, SIN LIMITACIÓN DAÑOS POR PÉRDIDA DE MERCANCÍAS, PARO TÉCNICO, FALLO INFORMÁTICO O MAL FUNCIONAMIENTO O CUALQUIER OTRO POSIBLE DAÑO O PÉRDIDAS DERIVADAS O RELACIONADAS CON EL USO DEL DOCUMENTO O SUS VERSIONES MODIFICADAS, AUNQUE DICHA PARTE HAYA SIDO INFORMADA DE LA POSIBILIDAD DE QUE SE PRODUJESEN DICHOS DAÑOS. Jörgen Scheibengruber Proyecto GNOME mfcn@gmx.de Pedro Villavicencio Garrido Proyecto GNOME pvillavi@gnome.org 1.2 2006 Jörgen Scheibengruber mfcn@gmx.de 1.1 2005 Pedro Villavicencio Garrido pvillavi@gnome.org 1.0 2002 Jörgen Scheibengruber mfcn@gmx.de Este manual describa la versión 0.12 de la miniaplicación Netspeed. Comentarios Para informar de un error o hacer una sugerencia respecto a la miniaplicación Netspeed o este manual, envíe un correo-e a Jörgen Scheibengruber. Applet netspeed Acerca de la miniaplicación Netspeed
Netspeed Netspeed.
Netspeed mostrando el total en un panel de 48px. Netspeed mostrando el total en un panel de 48px.
La miniaplicación Netspeed muestra el tráfico de la red de un dispositivo de red concreto como eth0, ppp0, plip0, etc. Además de esto, proporciona información acerca de la configuración de la interfaz de red. Icono de Netspeed en el panel Icono Descripción Loopback Interfaz de loopback. Ethernet Conexión ethernet. PPP Protocolo de conexión punto a punto. Inalámbrico Conexión inalámbrica. PLIP Conexión de protocolo de línea paralela de Internet. Para añadir Netspeed a un panel Para añadir la miniaplicación Netspeed a un panel, pulse con el botón derecho sobre el panel y seleccione Añadir al panelRedminiaplicación Netspeed. Configuración
Configuración de la miniaplicación Netspeed Configuración de la miniaplicación Netspeed.
En este diálogo puede cambiar la configuración de la miniaplicación Netspeed: Dispositivo de red: Seleccione el dispositivo de red que la miniaplicación debe monitorizar en la lista desplegable de la caja combinada. Habitualmente se muestran todos los dispositivos disponibles, pero también puede introducir uno usted mismo. Intervalo de actualización: Introduzca el tiempo entre dos actualizaciones de la miniaplicación. Tamaño de la tipografía: Introduzca el tamaño del texto mostrado en la miniaplicación. Muestra el total en lugar de bajada y subida: Si selecciona esta casilla la miniaplicación mostrará la tasa total de bajada y subida. La miniaplicación sólo ocupara la mitad de espacio en el panel en este caso. Mostrar bits en lugar de bytes/s: Seleccione esta casilla si quiere que la miniaplicación muestre bits por segundo en lugar de bytes/s. Cambiar icono según el dispositivo seleccionado: Habitualmente la miniaplicación muestra un icono que representa el tipo de dispositivo que red que monitoriza. Así pues, mostraŕa un teléfono para conexiones Punto a Punto (ppp - módems, etc), una tarjeta de red para ethernet (eth), etc. Cuando esto no está seleccionado, la miniaplicación siempre mostrará el icono de la tarjeta de red, sin importar el tipo de dispositivo que monitoriza. Monitorizar siempre un dispositivo conectado si es posible: Cuando su conexión está desconfigurada, Netspeed busca una para monitorizarla. El diálogo detalles
El diálogo detalles El diálogo detalles
Este diálogo le muestra información útil sobre la configuración de su dispositivo de red. Dirección de Internet: La dirección IP (Protocolo de Internet) del dispositivo de red. Máscara de red: La máscara de red que depende del tamaño de su LAN (Red de Área Local). Un valor típico es 255.255.255.0 (red de clase C). Dirección hardware: También denominada habitualmente dirección física o dirección MAC (Control de Acceso al Medio). Un identificador único en el mundo para su tarjeta de red. Dirección Punto-a-Punto: La dirección de internet de «la otra parte» de su conexión PPP (protocolo Punto a Punto). Bytes de bajada: El total de bytes que el dispositivo de red ha recibido desde que se ha conectado a la red. Bytes de subida: El total de bytes que el dispositivo de red ha enviado desde que se ha conectado a la red.
netspeed_applet-0.16/help/cs/0000755000175000017500000000000011402462050013144 500000000000000netspeed_applet-0.16/help/cs/figures/0000755000175000017500000000000011402462050014610 500000000000000netspeed_applet-0.16/help/cs/figures/settings.png0000644000175000017500000006403511402462050017106 00000000000000PNG  IHDR`8esRGB IDATxw\Vb> " QTܹQ+Wjr+-iLmbfif2s[3@܊ Ȇy zWs{{\P@ x)SɄ=ׯ_/4}}}IOOl6͛7ʕ#%%xZeLpp0vvvfq booϞ={hܸ1HT*8pwwwtE^n;;;Ν;/o@ёee˖Å  B.PD BCCZ*)))EϟGVSB\zʕ+SLƎ{WpYB3}t.^HTTAy@ xHtfI(0X,"O7{- Ѥ;vjeʬu:n3@ xb`X0LylFVc4tbggkOIId2P(T҄ HLLd2ZP#^`hR:ъb/ iii(e4qppȑ5l6SbE5kƪU$)F ⯿5d1NR)4 2.!!?sUъMn`kkː!C sYbccJJJÃRDP`2pwwwt:rx,qemFPXu3%J(K'b~,AFA|ߝڈ4<3b(\UE3Xݡ|"ޟ1 GumMΎMaD'7Q0 ( ^3Old2 ,_aÆ1x`.]dBV3h Xl^XnN)Hl0)9 l,)bS7fSGضz {0qg߯h>qӰ; }+%=1K]6JI+U~|>11{Χ瓎ғNN3 gٴ:}<y?XBB`mJ"&& 2zh޽{޽;qqq,YB\.Sl ,6w⢨P2<1T*3.VM6HLQ,ǵ\<*5XG l KMck m(v[d Y9mcXBva($(rFTx~@Tj fС׏D[T*2,klrMA<* >K/akkg`6˵{Dܣ~o۪VqZU.zhv~Zfi73ƯfߍKc+컑j]67س;؝*6{v\ LYykKIL«=^Jj! al<û9+p݇۵%'~gɏs5݉zc0f#ޙǻlzvdTډ*̕a㕇="K{槴sfc$&o5z7} 7#q~53mˁ-mޘrjI|o!{>IS%sKxڑߤL&U&Jz]hU)3Tĉ⤴#2%|}ȈH7fo(iJdOp2,ڟ7ǿEPuRN͖PUlߢK=g&GφZ]*vDiRRJWY [{Fcv͛Ҧ'mT^tGZJ*MnUIp[J~p s$ m^%`W/{":TODs34+K2'+pN0ft {TlePK%dǟeOrwwGw6r lNg,|]}<5FY.~&d2akk˰aHIIaڵjF`zkbo͂sL0ŒcBFykXF!T*W+:%2X)alEfu=" qX#,e;Qf5wKp|r jX8'.\i6~*ː2g̺K9܈^/S};K5Cc ]԰], ~{$"*t_'3:G0gL}5P]ʫ <թ+{8g~0v7M3w!hwF`=G'MQ' Rĵ琌5:6(sZ"qW~k/V&\=؆Q㖵|JOɄ#Ϭ<Hɒ%y뭷HJJd2q ~mFŒ%K0͹>gH8+v! e|1-QڧׯgϞ$%%0(S%.%蓉pݻsK/}9w O,IR.EL1G%ʸp= wE˭d쒩 R5@^\Ȑ9JIIϏӧOSBB%^TVU0p@Z-=$accCBB˖-^cРA,]4_l{v<=hղjKW.3flk7 Ϧ2pJ.m1&w(,~/K>Fb;er,$zg%sI.oQxZi֯ '$ Ľ<<@%'nV(R-D-UW$­;g0;$!SH fbfWISc#g[$g,Iɸ %3-Nx{RzլI^Jg֧t'P(i(]45kƇGe2Jڵkg<ٌ;III\CYa֬YCPP. \-!)1O8CUKAFKHPMyodϭ.'vΥX$2нDmx#N'{RρI([ƿi0j<6pS{@{|W3t00ԯ]$ZrQFvօ-MLB,IGl^J:\ؾ#W/D#)%̼;jcN^vwc!-|}<=pvvSNd-(66[n]\儅ۛJ%W\aѢE(Jlmm ,6x6֔?q\ }x9NҞ 9@IWwb7J>3'w k]v0bXd7#th{y/NjP;}ޯyt/3<;ͫe - -4$<';|sbz7], ~_ml0)Q-$]WҩT큤_g|ǀ㱍xe; 0%q&~~gC;[u_}ɷ r6Ȥ$4kk6$ WX{3O-QR^<)RYGmZھq#LOO\KNN%ryъ#&Ԑ_M5qSpPy[6n[EGHHmߒ(Qz9&6mFY%6?cH_d2P%?֭_zJz=QEMP TƑM[RV+ 6k-3T<̕+Wpss+/\ho?ϣF㤑ptuE"(&(ѥ/] %|߬'{=Zjɓ'4]\DEE*62Z-#Ϸ>k 5.ҩ@, 3R=f$j`Id2e˖7ol@, vjdh4Xk\_)g[lf{E@#gJ(@ K4ejZ cϯab#!6@ b#@ @ @@ Bl@ F Bl@ b#!6@ b##6ڽ נtc S1=ӏ:7JsDԟ#_3%bOUl4n[- hhjҰ@>0Yiå|啅_1QU;kh0ꀶ|g>`5.!\`@H(r=B/Nc|kMh1; X7-}EFYKyyI &5$^MGK0@ x6f, ~eլ,@ v Iv]sx?M]:mVF"ffHC-MfymfGB};_J4 uZƗgӳO׼&MmڽpӨδ[}hcVF+Th̞&[gAw2n0Cg^hҔ;>n?\ uYrc~v,H?l&_~k"L+6irPke8K- F`{5V|uzMb0äH`?d7pkCpf=S;f, ,wRui׭ M\O>d+Th?f1(dGR FJDisVo&zRyc(ڜr[DKP{Gd޴;}[Mg4Po a)ji";^@Phiq<(M %:9݂oDNؐ*dK";RNn|z|?M=lN;݆4+!̘ <9vhfax`τQJz=#9đ(5eO!TSbMW͈ ˁ򣸸m ڠ0O3YUڕW6́XAj%-I8}cz wts"73ש3 R3𠺏2d8TǃhuQĥz[#Qxd^e:g eEO4Ȱ`l3IwS'0r z4jf[Sɦ|"({n^CNY*nѡax(\j8L@ /֞5a٪PھSG}?1 bCdw8ST sp(MI;%.%qɳ7}چRYz"Y{D0oGxJwJ &<[%d(Y3Q0sswdTU0gBA>ç)SfB.qO~\}W?Tg'a SN[^z˃Lҁms7));VĆK (<30%p[M*!4,~<#kCzZ?^޽-PMoj8ql&O-wmU'9qfl`Z!tt=愿3 0\=j/̯]B@2$p~ן/*+fycA2*x:99 W8&FOv%iTrTJJ,|u2^ '#>>a߰0wc;ԡK09<F#~.8o'6I|,MΕ|w wmܬ"NQGǟoώ0.-H{zOS>P.o~bh:O`ր n4wuK0\ k~eO`TҮOu2ݓ(OZÅ%@X #F Bl@ F !6@ b#!6@ 3R@ If@ xBLoPbsi6oތ[4(@`XK.ԪUKٴiӧO~y3!Ȃ Rɝ;w:uc4qssCT$%KhDz y]dLVE (xV\.b&0[{& `o&{HFJ #x@gyco1+h/-e0RmB#i۫|sA_4<, E1iiiEs٘=f`D,^|H,}9/zB9v Qѳ7Dz{TB,fnWTEV/%zC1|-g.23E2 ~V/0;_yMbU<Ӳ$a匙- vei1c&X9|a=!KE- Kե\>q'G1y=k"5>S[wt)( Q9{ oM~U_U~^]G$!doLjP-ٮ$$JZR2Od?I{X\y%8p@}֬Y\z5s5 F3Eᒩ4UZ.r|,r`hމA-h81# _Ä^Mhoғ H\ n%8>%-&Enü!WCn;u\bO)ޥE@ԡFRc?M5GP'Mv-3?GnS8U}i+8[ai ٙv-q/\Hj#7ZĂuW0sd2Y>j߼*m[4yЫ|(TϜĦh6NN=fI$\мy~Ki^%4)ޝN*5=̞gIaqݺuCVSR%TB*UX"jݻ[(ڞب|Q$~p=@Dә Ee{9thu+\{or/s4{repfۮ^!k/>SmRϲn^5pHa8PmqxmbXpj'Np > / G,z!Y3ҙ++?C{j2ulF}iʧ\H_ͧb?#b1Ӷe}HԞVbMzH1,߾Gc*3w;~:=xe6mZv$ ɮ6f}& /~b0Kpn=e-5=1^HQ GQrQJ\\\T*Uёڵkl\1/x(K?~Ьt60 2ApS*q&cZwO[^9ǚqTѣ=ak#9F4FMV  'Iˮ!kOgkQ$Cs^rS!u]9x=JWt ݗ%r z3,Mqdn@y9]3)67-#4Je泤X3w…CzDQŸ݈:^SKv8d')-bp8Hjj*...899N``A@} F~H$ wQL[ޠl~aHR]n+7{㛵{܎ ka.?;]#>vj*S$Ye-x`u]rwӗ]X9, F2 9 \fr T)x r]LG|VTdSH3":$WK6IM7cҴU,mw IDATZ@ ȶI~*T@2eHKK#==*Uau3Ak5VaQzinS.Jg/g*Wq( %^zQqz\taa':, `.፛{YlF}~2c FR!%|U$~OUPBy81 ++\JkJ;^l<^Ncaw߅sYrn2Mi+^[H=%ltnFU" 9I xhРl6Ӿ}|="fW8v-Ʉ6_V.=BPQ:nJD, ;Y$&Vo9-{TPxW0gG:ӹbFq;i $\9?f䳴;>bb󢢷%&bb˭J0DzArgfFI~0c]w%?54\J5e4Z {8Yy{{Nqss+Pz.p+&.-r*6y/fG dMy ~-S}>>`o|q~ BQ}3uQʍHik2z,: F(Q>?9Jhƶ5$lt.׌eb4v­3%*PӶW.W‰MԞaXp&~9#V,&jQOaPMvC1z ZZHljzWn`) wȶZ Y'Qb# _E*6@P(bW&!6@ x0 N֓AC <ȋ'bRjhFƆ7ob4Q_Bl^ZN6mڄ0@ ȁ$Iz֭<M4hڴ)իW'--MC <R0@ xh@ b#!6@ @ @@ @ F OS%**-[1&0R3jբQFˆ X"m۶E&T*k ő#G8uQ6mPl :_.ePBlG!m/:z[[\&/ʔ)#}ܾ}[A(b xp P((/'::7x/jժMRٗhłBx=tLlfԩ ؼdbL:^tЄ'[Ƈ-IF퍭- .DNd2Yz6yGm+OƉ h)Ũ$Ħ3qoG*P;;Ƈup1GCq]|T/rh۶mDFFRLhd͚5w@V^mh+!6fR4݋F>8hTۛ%3,GX4e*y{]9ÂOby<5n")) RIXX3VBla4׶kנХI@ { ce-C63`67ޕĚҫψcѼ!-g̖T'1wT@jaה^4Zooo*m^g!\dK̭>)Яj?0x~P/L^B#;PR%*UDJ)wof}Jq=R.<=ϫGcʯ=[饜/Wۻu{fIBl-ve_{9tx=}e(8%͠'9w+z{H;ü~Sc{/Gpedʬɘ?1o3swlj ׷7ާV?6jONmꀑx27# k|N2qgzEo60]eZV| T2:^ʩ˗|2-_YJZ|vVĎܼ/K,~䇭 6J\"%LHǝLl^v m4Q({6G\ɔ\?Wn\ R&|cA#0isyfw7rftVsj 5>RLq'F8[ߖX%WlӲeI"F9KN LH[9>m=ʗ#Yn{*ʲxl XUGi@NVRLD՞У9\gu~@1t[ Mx-#:y*ZIKwv$1m|G;ȑ[WE~6wo¸"c.}iP8UR(wLE{3滉BQv [M(zUuBJW|:r2-rMΟJQw jR[i܁oIģ;NZTxJnxs)ϰ1 xy6dɘ/4;(rVUU;ӣ3هC_fX8S.IXBJΆ|<3G?qMR 'fz@~= iRnum]amev7%=',H%nhEuNGD-SagcgVQ^78,h?>ve*ACd{˯=J͉й6MώxW(!HbA*]}q(6@mSyV[@n1oϻuYqF?Ô_ xHd8/UY{}@‚nlLjb+f7Đe=j;MKVuEHU2L0vJh83zwNQ<0U^AsY;h.ƸS,/?kʮgyq9Auj$&@` !JE>5ZUPs =bY@2Na+6V"_Oÿ%{JiEޛ*N(1'6F-VASyvdκTZ=O"^6Po'{aʘ̰N),Pj Li) ϓ` a4?lnrFVp(kGob[Yhy~Φ`̠r*  rmчVm,s'c3Е |_*b󔰩DQ͹6//0;fE B[?_}^E1:P&D{^ݨ9sctfuۛ\hX6Qe2t,ϛ߄URey^|86:Рi ]?>Rx2iSnzhCGˉXIˡV-y$+Sep&cjo6J&zY>Mϟ4@#ZIhS?3{ sI~_ Uz]5S`R} h 9_uj%CIٞmQ5y`#g+ V'x7ڋGnFۺu+]vTRϯ ֔缦;6v%0_Â70WøE|1νdSTdɓ,Zdѻwo:uDRR7oW^}!ۘ'Ft;vйsg_d+ظqԯ_?LFrr27o{ yFl$x0iy[σk~*Ifٌ$I(JECJ*~$)MٯX,X,EcTa@F@ @@ @@ Bl@ F !6@ x7VW{yy1n8rBb&"&|y]+*aA1lYj?_lٲLG08[vmg&!o S,#ۮľZSLﯤ;n홰+Lza_[93 mg/L0`[v9m`3Oџ'1$''smG\\FѺWzw6c҉ĵPȝI?ŔVmug)sKDzrbi]GZV(=7p)lδ&|,CwޡWːdfY_OŰ~"f20FGjO .zHS܋+_&, yG1y=k~c!1.EU);uoUYz )H:ퟭ!ӋdTğt|1uaLX~v h4 |9;3B)ޥE@ԡFR$tkЫ) Mz2au+wЭZq|rKZL:.ϼ8w"uP 7d\C/ڞ V[׮iŞC>iYP`):D s3)Jd8f 9̚l8]/b8qc3z3ߚ_i, ʜ>Ƿ]7B_|f+J=˺2{!ϼh:s!=l/n aW~,독p6|C Ha8Pmqxmbr_/ ԫU77f=*z o,}gOrɴR"噷`jMne#50u˝{u7D7&S`iw XOWGbesC$6|yG;Kul޶_,VVE=rPP{ZtDhH<my}b1\3n$ \Ml!kOgkm`5R[7df׺}9 hO*U Ukؒ܊c(k/Grr-?J( =l-$6g܈fxȱ)ӊC9$)RlR Yf$_j`wT Oͅ7H0qFuwռ U(K֣{wnuot%pHg* +r' |l4ip#UBmּZ [5J*͝7X|ϫιF9=6_B{ag>ZꐱcMCMHgߏ[i-ERܞʇOO~Ϣ4VPF9ABH [TD O =CX9D^oߔ Ҹ`~J5=0//?mLIT&++N,C_XS '¾]w W~aM%*iM;e˖lٚ 3kI?b{,P:{z$cP c"G~U{>dz{V=lx:r32KhxK]<&gķI<×[9x0Y7c E# {Cwwb j2]QīU/*^ZϞV&߼2&V: ѹ:%qsm{س'{~txzMQ;r=Nc)Ozt,Oa]?ec NbԤt 7$xj.{n<0-jj])b$F  OHmؾZ::fWHL \>}D3WK|>nY@2p(Cs][/K5㧩 8]7m}rw w(̠RQ,|[:G2[ 7@2ʮ,wr]ue'+du֟f J! fcO1L2zLZ 8~/czTXف?O뷷x{9Շ1E&tD>6gynl[iM~D hР-]}>xjl|~ɚT'JwHY&t2SSSk"d/͠[hh%&΢ɅlPMt~7,y;x9qiWadsV~؍4PۃAm%oeYzO~>؍fS;y>{nQsr@v3~t zѱ[O^zҬB+*o:%{}j5ymeg{aZVz[i *D= l|`?=Zßj9r$NNNz8,&&`gp sxj& S;vYinq&vwyͳk\ޟcC}W\)й^^^Bh$-gV&x̻ch4\*lX+\ѺM!QSqX%KdɒA='Xb08a򲦔 QytWSLs*0@ _@b#!6@ b#@ @ @@ Bl@ F Bl@ (Q 7n\}#<f.b—UOVYINNfժUzT*.\dBz^|) ;E/>iċ'E xFAlcr~yR^CP,hfdn߾mh4ZjRnfL:&Ѕ:}|>SZaFeh;RMzS.#-gq<扗al#C. OZ x<Ʉhh4Z=h4b2]+u~H"<3g-Բg6R#Vu 3k F x=ba2 Sp,$_Lf]+9ߤ]C4 udhL@ʾwi@@@' IDATuѠ麔& ]&jFLXFd]h8t+tܒ3/-&fH~Ԃƍ1ܝ231{fZ:h47ۻd;GtlH _lm}]y⊓07B/#N'g>=&}d=s%Zj8El o66"Wcgsem}iȰ-8CILN|"~%H`\(LUe_mV6_8P`"SpEc6Ipa>,n>_|s#Ͷ~~-޽^ZGM8S||fpۄo$.j1&~?yɟ֖Q;#Zˏ>͊A :)x^յ0M)f.Oa351e1)=qJБJΧ2;s9EL85/ooz7f7pgF)PqT][֤Uoum܄fъ`Bw'38*70٤Ws5B҉w4):b\T.#{8VϻpwΈ֭[׎z-[$o^^E~~~w՟D{X;k6]kϼ[ɤ$9 !''G>TY1Lx+uKfd)[7_u.y E?n4Aĥuֲ #b#  "6  b#  "6  b#    b#  BԊ)oNʆ Y-H^^ƍKhAA,0b2'JYNfͪ_:Q|z(YsЙ`><op '?':AG.}҇GrǦ?ibǎ_ʾ zWݱN|)}pZd#?qnp9KXc -_*f~?[kMzNm݄Ko&lդ5c[|[?ݽcju>?^ZV˥Ӑ_*_c/~Li9r9q=k[Raxq~a[y|] Bl~? Dm[7q/r٭7 vh5/z޿Aȯͻy~tlOBތ_xPj]7&*dۘw3~דSMQ[)\v?swDWNs Ysvns zO˨qa\tL6ڶ`Y*cw ?\T~Pi;Gcˋ?0|?P =e|\q{_OwzLP#\,;1^ҕы;'WCY)dQ;t9(]'Fqc?ڏ]9ŭtЁ:СYOW[]pu,' =|^X^9@P֜E2v ܇x7#¥A{ [6I-{ 7Χ\t2IagG˒UX8>3»śYg3m |7FH2~)œmkg=t#I>_ϟɖGodWte=|l|_|4Y>R@WQ5ny}#f+{ Ž뭦øhoy>KQE#΢M4MZGya"}F#d}ŚeS nT,ОoS"kJ]挩{gaUuuumO~ |,oDX]glvu{EVj*^ Úԡ sTW%pN=B-@ @MYff7>_o1p7@%fd: ׽i<)n˿tcMmnt7^ט5\Շ&͎;8*a_e \9~]peaw\ӑlGqg >i292qW]{e˫.˾ ٛ/oOIycǤmlҗM3gIf.K]}&g>\r&f+g,u $[tE,'̳í(,Xɳy Z&)@#qj ejhend/VkVɑEۮS gNG.k;8M6޾.}6`'#ۥpřuܖ,ۏߠLF D:yo栯겔EIUi5όe! t6<7wJd,3s@c9M0fԥiNDܹM(>F: 3l%4v#<lP&uPE[Ĵ;Ņ<6Pggx<[yXO_Cy\6wla;Es㥽Pn[6l0㗵灉y8ncs1ytHϨ tM~u\:nzE^sFO;3E^85tY d:9p;L"`fFU иQ@yOLmD겤#d7ށ= j8_Ǽ FpSoL'2sλ3yyߤ7 vOHض8ll7ލ/q3j'LoHA"߫_ݩg`}!w9*J yTP[h>S3ٜwF+ZZ5fz5cȥ3x嵿3~t$%K}ڧ/^jW,^f~h#ܔb`0W>?>Z{7Cɯρo^gg=~: g7͢@w'Pu,*+X's$U]\Kc6?/ֿߝ~GfE t"O̚ӷRX}Oޘ.qKor'5NljxGbN_ݩg\iMޏM"[]M+;Q=Bma#I؟G˳‹/fr^Ωe&g̦饴W&1s{ufЭSȬk݂!מ˶h߉Jl8g'uL738izsN:f:qQ!\FN[Ej>|Q'85):@W^#y Z|;wk*~3>}88Ѹi ~u6'c ٷ[es˜_8e.} <}h[R Dźu7muב kzMh34Ϝ^e֍ibspZ6KnPc'ؙ;{ xinۖ2=u3/>?W|p 8Sԫcm=@Ǿ#9;(@FmfL6MՂǸe^4u~|vƝI\cKmbZU5x"Cmd8b*=Oh jlqhöe<˃1d%Y';wowIz(֊)3`(EZf]2ahٷormOiF%DZ=mv(XW?6&ٲ*bme2#Zr-x맓Raf{0ֿizcD`]$vgn :|*(PFN7 '#qbv7nNȒX!!V DRK(x().4Mw&)%uIJ 9%{v0Mϡd$9nxX4p; \v.dpۭ\ ,}A~?*:s~ <@V7RZߗmfO0X]roͅ,QUTܻӽ1mYxS3f\#g#b#BtFb5!YMFĥ&:_Kx櫆КbL4M%99ԴT Miq1)nwV<=Sþ~?]31,Km5'^W=뗦?耢I׮4a+XͼBѽ_KR+b-˔'xh:$Tq'2;[q"bJTG}6"6 Mݙa &XFddJàp1f ݳ{trÈ~8H:&gxpqu+2JӪRIc ҷ|{9gjm~!_:;2+XG݇Ksf A%SIĞm-k{#PD& ƍVc U(xu DY e]#Zv:d<1m.dz]{19w(cmdOZ8HM&͇8ؠ׏6ѻ/}zϻS\(` M-HD5 >M퀵 iSgБ9kl"c7 '7BsM Y7Ep5vqawZh;Ξ}4@9͛f s=3uTwGef}~3b?siPA^kSۣ!p2>nȪNDOIJѶc#h tCe8C"6 JTT&U8X76;I{"Ҧ=4#5pp@Hl<~^/{ QZ|{qc˨\ m;qhͧ{؏#5ɌiusذeYu w f%\Ǝbf$5N B4#MűLnwFxj-ʍf3z_1 cw3ޝOnx<M[zIDATVZ\ij2PJQRR'+7i/bԅ]iR?D?e :r߭Jݦ'!ù})hzEG: njɛ:)8F\h!cD1E_1k[͌8n#7n(_pA9B8h{1wi8h x}GKWtV$%9v04Ȯc .T#>vH&TV%k!U2¯еa %BD+Z9@)2d2m49?n#uHƟںuklAmfnb,'j%-nv) +3Y>tmsי;O ǘ|d5ˉR Kyi9yuHMȱU9OG&'-Ć*&X#.h3Z8i L`':aSg q pb^ĺLbkn7$1\ȴwg*;KV`z-0MҚziDÊOX9:j ꣢ݱa ͢D%HfW eg֮|%$Ybb6*z8 "  &ODXH7cgsl`7r2xԶ%fsO;vsw;v(;OSB:i\ݿ cI FGr-QgPa3 5K Xq,;@ fH lAV։g$,+MGblO 56sع̴H'k CѺYMaNϏt::xBkMTXTMǬN>67|Ld~t2pFPk67QZ^NGTg6!88\N*543,/P9¡x3z0+Bn1!aꚡ؋FY3rT"Zᙡ}C ny,L3Զ %!IO ';P*BX4QL<&:zy-P_Tӝv$8v0ݩiÙF^-=9g$dlT|1UU.*1͈Ȫa2 !tIAqElA8~wZp"HW *'D)--A~5h&dtMRRZ BE ڵkx<'IMM]vA%KPRR*X6vӵ4 p$;֜D,f[IENDB`netspeed_applet-0.16/help/cs/figures/details.png0000644000175000017500000004370411402462050016673 00000000000000PNG  IHDR\sRGB IDATxutGո [k  ^>P\jH HK HmK B`IB<! I6@Rlsܙy̝]`kk+!bŊa0ݻRfɒ%IJJB$~[ti8;;cmmtVe.NX/^%FQx@ XYYq6ldʗ2J%Ǐ/rN>~tM_&$$CA dJO7VhDR_ׯ_^GP*xUp3h6}Ş^kiia02Mikk+M0v6yN ~J6Ax@ &tYE*11Rz=֙65 8;;ӹsg)$Iۗlmg7ik4)W7fÆ HIdz=nnnxyysliVvBBɌ1 JJ\7]]0tpX|17o* 6;`y*kՙ4ƜF .L=Plܸ^Onի7o&,,쩕lvumC"E4h/FTP(0 УGv՜랖Җő^/Ɉ<19)^KIyh"f(EʲtgԂE,Z^V;_qi6Pآ0MF`\3䒄$pj)sNR^e?x ^E*鈏+9992Fc&AL+ŅAP(Xv-7oΝ;^\ΠApqqAәkvu$ LFTTWNINNʊĊ+2M7i4OWh?g-T4 Dg]ΰw&N=@I/n] \3yS~!:KxÏGc@X>+ClT5y!{9u@f]Ҿ^iqβgz< \|yޯP(P9t+Wʕ+t~w ȑ#Yr%AAAeg!'JEXXsaԨQ >:wLDDK,AP ˳}qY`GPTylmsͳT*&#o]B웟GJx !+ǩtYӈ>cl)6`] 2ɐ%럱I7wγgⵘ"~IuQnnC>F_'1{9u^@LcUEqθWGϱ&‘p[rR*yރͺJ&LIr9={]v!2\.`0pB:t@ppp-RVe 2޽{͂ PTdߛ^ZmJÇ3~x*Te)wOgȋ{Rܢ8wU[G"X"/r*A8K_xլ$!YUgϨ")۪1e a:ʥ)pѓ/[7P?Y%H/;;)وrF63A'K,6(]𨀳0%q<Pv$Z;[kSQs?&LfYsGU%YȻkqK>6ݰW :ˮ58r/>7ÔM# 'smBV}:Q(Vk6r4\٪*C3ˮO9.LO+cxQɔɶՃvU]CxNe+ֳǷCxeR{N،#INNf֭XYYe!iuV,--3 ldBLӑd駁D?/;CTJ8q__AVEQ ǒ%HHKj0`ZV./rFOZ"wàO;qVxwuV>Ei֥&[cͽlYTxSSջ2֙\ԅ&-\ 9w%.5{ӿr0Jؼ1~߾Gri1NsAfSlf.Cq򓉊!)l(ZHϝر}ǯp*׈>Lunj ? *E;n5as穟ͺWn6׮Uhh[UJ N LZEPb,v\%IJ?ܓibuV&aeeM g|Li6e0`Сűyflmm1b:s`)b._ gi4lАaCS*Rsߋ/WSd26?̡:j }3rKgCgY-gy[G㽒:'2$28rGX5oLph8>˱uy9` /&`]m3?]&^w+e'qn]SN^Z0#XjZjgϿj11 >aǺ(% d;է;ֳ* u_*ͮ; {36^Lb dV: r,D<&O`Z} {S*: ͮ꘳ - Pò1m*TM-'Μ0$K$5`Ns}r: gU#TQlR?ODo$#TA-Lo_ llliQ*$%%)jv%z>O+X^OB6l111,Z{裏Xd F1ɚ[X/'PLY_FRSXIF|ٛ[ҭ[7bbbHHHh4`!7ǔKs>| OYmE,!IIމZX8±]IP!u蟏 QֹZlQ M$H Kup^RF_$C1Irt )fP@c WJҵJ3zoR\lfghlrCېH^*WC2}ӆKę@fYѩ~)l3TX*ɡsc6+RsLr,B2StO9f:w0IrbT&_DAif*oZopbŊSlgwI/_LʕTT)SZy~:z1O$ >CZ--B$j5QQQX}2p@-[fv=\vFͰf 4h666XYYѷo_Ib ?}:.ˁ$ $"s.8Qz5.R>Ndx{dvEKDT8ؤ?Ł37̔E1-DE8$ElB=ɔʤ$}(vx񒸷Lwww6-?˓qOc%m3e9%wV/_㭭\|0qn!}S_}{rӅ(ͦ2ldoV#:m\1E>D'U0Y,>ц0fkDƒ<]8[Q6,5IoI℄-;ϟϴ:|!T*ԨQgggL& 6EnJ "}U 9r2úuiii&pqq!222[qmo 6)9͛qj )' 9s4HNlM،cpv'~%br6[2+c]S&@Wj0lSqrWf'>We'JSgEƣf #%IHٔ-elɬ`D&(Y$%ݘѐ@xnJ \߷cٵ)85GNGQ.4!'_4R{b;ۺd mlc_^W8{/s *hJh7\ 7Ϲ#cfY:m#v^iˠ*e7~,Dž`CѽcYHHoYsrp>|yptK./6L9 c;#˗z8J ΝR" 6 'K׮Q+IAPurr#HqX_~iR.ٵe5^K)^'Zḟ5m_l*}`_(Ӷ%zncOX%lM5}0HpqN}ҁ%jӤss,ۖ9RptL h%%xR2ʝrDZ 3].sLپmݧ3k{ѱ6HIܹr a|\mH)KpƲ?ޯ_څ%ΰk*=~>U4bbbw;QQQK76EdFBHǜ>lmmݻxS6nUiQ}T|3;\]]}_ll ,ūBa@Ry愅k2 GGGN8A*U2]3 رPZyTWEc :*UȖ1H& y*R@ xiFpvv_b~js*ڰ;M>EaJ$@ ^ysy$IhZ?~lmV<#@ xxS2z<ٿ@  wJљ@ }R~O AMFdҵkD @OTX1?W' @@ B`@ +@@ B`@ +@@ B`@ +@@ B` =aq~B`0<Yu+?~/SZjzɢko RE~Ԇ 1Ǥo3Ą앋$<@SB`u洮{6Lf-!%IGA7U،Ewo$rinFCgH<| QUAӨD6oXFCvg\ w&Li{4[Of $@WvEoV:VQfr_s{` 8xM[2nTv@kFQl~4l؜btaԩAS5$˜V^ hq s:f[^N%mbBwi4Tkԍ -zC>IMtc8ǼоNEy0CroRfd3kBOBEs8mҧY !>3rл?jVjj$3uso\fo |B˒ݫTO'5q4#4ZKȝ=dt_jJPɍj]Fҭx(go͗*֤< QBӀE6+4҄J4{}[e{u> :|w5N5>`t+#_ >_kEn*ӻg}(QRt:h9lxL<ĦzO jV>=?ȃ{ګ14}01&Sevs~ϔCa^02d*5ju+^A`/tQ6d߁Ut?csQč>+|8y ;Et߆NxI o8veް|ݙu?GvMMn6Ka6sxrߟ#s4s8g)ٺn8h#yX#æ 9ϥli's(Ҕ*'{%9?8} K8>Sfy}i?/w.pn\zBc?y# )Źe]f 2&lpGPszDӹMkhUuL1$H{-goyeSe Y ]P a_7T%Pҏ_.r7R.࿉G@>Nc,F=@Zq'5s.;)xK Ǽp1I XG83 6EϘs0ky殿= 2_`U.x P3rn\Rfn¸qUQkG(h>e-dֽ0[SqЂT\{cr}Vt)qM#0Z͜Pyѵ( Qm*8myP:8\lZ˽IrԒcPh(ձȒQ+W#O|˱vLZSoi|6Eٖ4cѪsD D_“H}jSJ d՗?[V~2c|Zv_~N?´%>Ӻvu٬G82mhP`aoI$_ݐ94f_bye_]4=]6'p'}ĢT T`:k]Z/c) s)[!$~ir>oLy͐Y,Y-3KQ?!o2{M!ZĀJ)ɐ!(}"/edi>-ZL@n26 WQL0pI?ոu (ʚV7ޡ57Īb*ZX.̵GG.3Z^6pI.lp+dL1| garM?`4.k F3Ѵ\oUͨhAlb(DZ8?TOni%4 F sOW 4}W3&vQgY(Zcs^SdvXD|2Hr,J,Ve#=>>b˜ҸoO)s"ScHZLTXKtPYSW߹mQ=xL\ǮKYɄY>jI)C'd+fհ0{W1| Amqv)Se^ x\%]xھ6wAy۱XuBf)7g+Gn8pmWG -[P.a8aesWimBqF ~th!' :tdtF L:u:t4˭p-Q9t?ݪ'A Ƕ2+/F)Nޘ9-¢#ޑ IDATjƝ>8z.FЇf+85iN)5(]*QF~?HAB֭7PSge6~2Zib`ׯ  r&_7w1݉"`@{_-;l-3Jner7YQXV2W<Ģ5i/wµ$>xQwg^A;GVӠ= vVtgԲ6śnF5p,[caQ\~]Z8_Ly1Hi;fӎg+ ӤgL8KQ( e(&tlsa{ߩE+9?;2mE}9֔߇c\zB[ˑMm2$Xd5PR_,O"Գ%X~0xcnz~-D)%qc*6nE`ϚghZU:NdjXx1@9ƿh[44A24&һ teh<_殿fȭ|&.Cr5/3SB x|Vr+}Ydum˴U&|0á/|TI"d@ZN22@2sbuW1(]@ bŊ@ (@  @ V !@  @ V !@  @ V !@  @ V !@ 8M┖@+^Sã oџUtoUH52e {gߥ@ЋQΜ5`OR?-gqU6|0;_͘Y}GF7PKAS @k$rinFCgHx4h4i40Qneru7Fg~ Hz:sy1ئ7$^!ՍLވ F= RRJd7h߰*-1uXSg^m~n 3dKܬ%?$Oyυ?/>zU?F)49xp9Ep"t/Gêa80q$  X/n8SFy'#W3?O1?NRL9J+ þgo" ͧl`NϲˈE`@Rf0`(Llڂ1/vڀ|ڦM- QD_}io;& 5T()uv٢5ޗîDµMLA5j1ac 񒞠ESȞ$pۦxN:KBG0uR/`YڝSAf nM4[3|I"!iV*UVgof${;2{K9 Ry(Eo8ѭ_<\چ%;W9<)(J,싡i9~FsXt͗*֤< QBӀEyjCZZFVwf3vm_5P Ѐj5.0VoB" w}i)A!'7uI⡜K-u޾2w!|#ܘ4<7Sc[1Cw arZOIÆw(g*|#gx֪,jt\]]ncQ^%MehlDQkCr|aSmRi69V|ݙu?GvMޟNdUx̓%vKqI; Lc_'an&i|x>fpdJ[&N7[|d4^ksv6vm/ <ێLFK~[Z)􋞐#X_2w ũU2mlIf0=/6>(Ղ%9{.C2zDӹMkR@yԍie-OBddOL&3xl@C?#\^YA|5*ݛQ][ l`!u*-qδczq NFLa*|$2ͨ`Žw ~~Mq?xz졸u (ʚV7ޡ57Īb*ZNlfڝMw훢J%Yy-R_=sHk&q75$, 0K{,CcK,hq?jR5UsUN(pQ!HȦr%J8rVG$dSCyZ.)ztv \0Ȭq~MJS 0 L`v/Sj:;Euז`Jv(u0 yJ{7lB3B5ѡKaCf% ޺ x(;_= sڵCʧ uQ'T(qk֝rsrNvEyya8^ΦΎqv)Se=>SXg 6„Y 1h0TDCV|&ӡ%=GUB{;RSNtDy{%YG4)om˘Jw(Mw{%3k[1?mְ*i"ͦ/dn.*R6C ^u&#$}2&ӟyc(~.CeS \{nr %]HR.P^. ?O#qPykiYQ-J 9>XV kctwvT| j4*A]W֕R TiYۅf^G@5> iX"tKgs:S?5ҋmィ[+ܱ e(&tlsa{ߩEW瑶u?'vݼB88Wv3ܣ.5Z e-@XnF|S~p,S&b*v׷M* ӤgL8KQ(zv;ݛv?Z6ߦxӭH&ey"Z kJ_ٱx.M=?/scOH3Ynj? WgʐTX ȅY8TӮHlcKoVr/[>,u~wXNrN36`8f+/ MpmMﶳ3dHcfwbGZiưna>/y| +ҵkDO@OTXQ|@ X@  @ V !@  @ V !@  @ V !@  @ V !/#'f3G7}z1&'"ZzC@rmC-X͗Xv!Y pqJKZM 52e {x ^gBc@$iAyjy4+/b2^e1|)tZde2d2٫كfۡtO GOQJ{!]zѢ^Քg^Nz%W72{#j4h?Hr(O`g>;S|#KogX9ޗ3?S^e~rg55hzIIkUSNbZ{JvH\FUiD?û0+(yhaų߷ Bz=ƎJ2=yc}wb$YGF8/\#_NʥPkܧ༟~~~I=ܫaS";K_Űrx.1&f10?bkIdG^"^ BBDmW]H0s{WCPf Ő)8=iذ9#Ũah*)7oe4/§5OWxfLhViZh4h6p'3b%mbBwi4Tkԍ -zCd%pۦxN:KBy&6mɸySڭ=nZ'JY$9#<z1`W}AN9ιC[^e坺u\{gJ G;2@51j\`d0xy2d*5juKi1-xK+qS#hvt-SJc*G?;/L0׀?ܚ:U5hjfDs1K_31=F23ƳP~cK\#:Jl9Y 61oy.fH{8CvxLC"nYɓXة(g-iDv_gLٺ#RZOȑu!%?jV'\l7-R`2@dMs^'rqzgmH1~(ۑr5 mTPP1AE:2 ʓߎqĽa)qk̿ s fbN!t}S6mJӦ-57QK)b%`V-gO& lIcTXlnxX]f-u'Nѕ|P\ e^j }zZH|LR'Ҕn&g|2OO*ݰC۱XuBf)ws+Gnbi;v,>K;RxLRKٹgֶc]ĖT ŭaUm2J h2;)6gS׍-P>J L^@.qt,KG=‘#)/8+=3b$1ԪU. W91d4b40$Gq&;R NҍrmQb v?&$*'bYEC9rBwoxJβrg iX"tKgs:{yͮr2EyQCbIІw?ScJ??_nkV}>N%3cSk1I{}%!65ZaGBVl+xn?}K?Q+0&K\[U6qQ$@tc}| f1E:-g],TeذqE$q+O<+˹|QKPybB8ZqfTӠ= vV,Eop˞\BuiTׅ{9͘l2~N?ONyppL.g±Lc̋ArH1 _6+ ӤgL8KQo v}YmMv/|+嗶$qw̚h3v ZL`|q(p։/CeU:%]I"d@ZN2]RU4(b~*o^1ʝQfo֤±l]: K_s1%X<{g;T2clmmk׮.28,fog.X; Ę bͤbŊ7Ƙ qV'6ay~1AK.⤋iG;~J+Wx [xc奈@ xCX=X@  !@ @@ B`@ @@ B`@ @@ B`@ Bl@ HhQ(dۺB`ߟ]v\1LDDDSzu!@&cM !BȳRǏ2eX@ x8;;T* F$)/LFBCףR dB&jINN~+UE"1L>qX @@ H +$Iok֔筛X +.N… ڑ$ ___z}O^X X>Ze˖aLҳgϧV& l Q0Og!XYYIX !`…-Wz7Yv-F1uk1Lר!%J`+H=6} Z7s_/aJo`*V@ eٳT"II\ $V\``0j*r Ì3HLLT({xͫ$=w}0wLb78\] }u2s7~ H k <|R3QpaI`d2llᣇHDdd$d*V"SiffIDATā2~NHty?Gr%nEE>ݕnUKy%UdM&ciiۻب:^Ok{GK-[XZa.V.$C'gbNU#u?Q s? a6 4ۚ Wˊ"ЎJGM??^~P)#)kj"EYY۶mqyؖ*}WyKagYJ|o͌NEbJdG8#7d);{\eW~-gcg fEXmmtwwZ2̜a/%ʓKw{O_~Zt @~Ǻy>;τkhV\ÁW2(&%]<Lˈfܓk_/IEDTkq]Ņ%QW^FFn4qnvbg#ѹǙ$X~sT6OmfЫ}- ܲ a}, LNW_.әo*`EDh;<<́XQu]\RTXuj*>:%;'ɐ).`U+B&o׆3Ů]b S3V\xA<8?^"Y!X].]ȑ#1\%NCk2&SaYT\.Gyy^:::>/^wlgyGX~_=ł(M[do9>t3Յ5 X`+iy]lSJzػ%~{Elas',!Lmv25d⸫1/qc`0k1\~?%\|ܹ{Xlc׮]8sKYFRl$!q&1=Cbc XE&a*! Wkk yĉ=X=@۷saF/b[!HЀy=Nذa555IL0=ill}FVDD5cd2I$)~olfTTTPYYydY,)`""2;4)N؉D"x7Bk㯱X χmߛWw.dVDDm5lW5 VDd,xy _+"!p]˗/FfjE8qx"lv] X%n:)))Q!hllD'H$Xv-j;( F罞VDdq5]JEDD""" X(`EDD4 M6>"""@6e``ubtMNNV*v8C0$ DDDn!X4r9\׵,@(20}5gΜ JYUa5uUfpGIENDB`netspeed_applet-0.16/help/cs/figures/eth_sum_48.png0000644000175000017500000000256411402462050017224 00000000000000PNG  IHDR84P&l2bKGD pHYs  +tIME  uGIDATxAhV?3^!r! L:d-EN ѺA8 ZԴ-N uˢaeCU=t ITFm PZJ:KJ.G{}=ّ6ȱ p8Zq16,vcvZKrRbaߚw⥞9}MJy?ՖUXÖgUut盛{^_4~\ь0lj-\M`MS¶43se=)S&12Lv4Jn4w{NO@d~|$cաԖ6P񒈟a큖͛O¯QnVoon3h[ u)|4iWsǻcAiM>ؔd}cDLTS(Fu^Ʒd%󑙹"[=>/b]Rvd+wC6-lt[`G> zQ4-!)X2a.l- =7 W QzD"'ьaeYۦrUSZ'ǃ(kڭjڭjVtU JrV,ʶoԑoK:)\VTu , ^fQuRq>KiZZoOooOoٗ0!t50 ga GQYb;ٚ F;ЫVk\7G4B(^^Z x,>vaҨ/ |lI蹨Y8OnYr9@*mE5(w~-E O/ \7GFAD܂L*ѡh&q\ZcG<+/ӹJ~x؈2 :IW 5v7?5j-0B(r2Sc!?;MDlE5*؅g2\7r EQn '⤘ħsUEȉ,'p@RBKJ„L%-cJ%큖LVQ@{:X5V 1V 1V\.WD"Xi30M7l7k Wu^-s -YN [7}1~%=a ϙh>eX4=<aԄ PǗ嶎z2֪,O,L7loRuB#'#vqlFRbviސmrd"IENDB`netspeed_applet-0.16/help/cs/netspeed_applet.xml0000644000175000017500000003340611402462045016774 00000000000000 ]>
Příručka appletu Netspeed verze 1.1 Applet Netspeed zobrazuje úroveň provozu na zadaném síťovém zařízení. 2002 Jörgen Scheibengruber 2010Marek Černocký Dokumentační projekt GNOME Je povoleno kopírovat, šířit a/nebo upravovat tento dokument za podmínek GNU Free Documentation License, verze 1.1 nebo jakékoli další verze vydané nadací Free Software Foundation; bez neměnných oddílů, bez textů předních desek a bez textů zadních desek. Kopie této licence je zahrnuta v oddílu jménem GNU Free Documentation License nebo v souboru COPYING-DOCS dodávaném s touto příručkou. Tato příručka je součástí kolekce příruček GNOME, distribuovaných pod licencí GNU FDL. Pokud chcete tento dokument šířit odděleně od kolekce, musíte přiložit kopii licence dle popisu v sekci 6 dané licence. Mnoho užívaných jmen určených k zviditelnění produktů nebo služeb jsou ochranné známky. Na místech, kde jsou tato jména v dokumentaci užita a členové Dokumentačního projektu GNOME jsou si vědomi skutečnosti, že se jedná o ochrannou známku, je takové jméno psáno velkými písmeny celé nebo s velkým písmenem na začátku. DOKUMENT A JEHO UPRAVENÉ VERZE JSOU ŠÍŘENY V SOULADU SE ZNĚNÍM LICENCE GNU FREE DOCUMENTATION LICENSE S NÁSLEDUJÍCÍM USTANOVENÍM: DOKUMENT JE POSKYTOVÁN V PODOBĚ „JAK JE“ BEZ ZÁRUKY V JAKÉKOLIV PODOBĚ, NEPOSKYTUJÍ SE ANI ODVOZENÉ ZÁRUKY, ZÁRUKY, ŽE DOKUMENT, NEBO JEHO UPRAVENÁ VERZE, JE BEZCHYBNÝ NEBO ZÁRUKY PRODEJNOSTI, VHODNOSTI PRO URČITÝ ÚČEL NEBO NEPORUŠENOSTI. RIZIKO NEKVALITY, NEPŘESNOSTI A ŠPATNÉHO PROVEDENÍ DOKUMENTU, NEBO JEHO UPRAVENÉ VERZE, LEŽÍ NA VÁS. POKUD KVŮLI TOMUTO DOKUMENTU, NEBO JEHO UPRAVENÉ VERZI, NASTANE PROBLÉM, VY (NIKOLIV PŮVODNÍ AUTOR NEBO JAKÝKOLIV PŘISPĚVATEL) PŘEBÍRÁTE JAKÉKOLIV NÁKLADY ZA NUTNÉ ÚPRAVY, OPRAVY ČI SLUŽBY. TOTO PROHLÁŠENÍ O ZÁRUCE PŘEDSTAVUJE ZÁKLADNÍ SOUČÁST TÉTO LICENCE. BEZ TOHOTO PROHLÁŠENÍ NENÍ, PODLE TÉTO DOHODY, POVOLENO UŽÍVÁNÍ ANI ÚPRAVY TOHOTO DOKUMENTU; DÁLE ZA ŽÁDNÝCH OKOLNOSTÍ A ŽÁDNÝCH PRÁVNÍCH PŘEDPOKLADŮ, AŤ SE JEDNÁ O PŘEČIN (VČETNĚ NEDBALOSTNÍCH), SMLOUVU NEBO JINÉ, NENÍ AUTOR, PŮVODNÍ PISATEL, KTERÝKOLIV PŘISPĚVATEL NEBO KTERÝKOLIV DISTRIBUTOR TOHOTO DOKUMENTU NEBO UPRAVENÉ VERZE DOKUMENTU NEBO KTERÝKOLIV DODAVATEL NĚKTERÉ Z TĚCHTO STRAN ODPOVĚDNÝ NĚJAKÉ OSOBĚ ZA PŘÍMÉ, NEPŘÍMÉ, SPECIÁLNÍ, NAHODILÉ NEBO NÁSLEDNÉ ŠKODY JAKÉHOKOLIV CHARAKTERU, VČETNĚ, ALE NEJEN, ZA POŠKOZENÍ ZE ZTRÁTY DOBRÉHO JMÉNA, PŘERUŠENÍ PRÁCE, PORUCHY NEBO NESPRÁVNÉ FUNKCE POČÍTAČE NEBO JINÉHO A VŠECH DALŠÍCH ŠKOD NEBO ZTRÁT VYVSTÁVAJÍCÍCH Z NEBO VZTAHUJÍCÍCH SE K POUŽÍVÁNÍ TOHOTO DOKUMENTU NEBO UPRAVENÝCH VERZÍ DOKUMENTU, I KDYŽ BY TAKOVÁTO STRANA BYLA INFORMOVANÁ O MOŽNOSTI TAKOVÉHOTO POŠKOZENÍ. Jörgen Scheibengruber Projekt GNOME mfcn@gmx.de Pedro Villavicencio Garrido Projekt GNOME pvillavi@gnome.org 1.2 2006 Jörgen Scheibengruber mfcn@gmx.de 1.1 2005 Pedro Villavicencio Garrido pvillavi@gnome.org 1.0 2002 Jörgen Scheibengruber mfcn@gmx.de Tato příručka popisuje applet Netspeed ve verzi 0.12. Ohlasy Pokud chcete oznámit chybu nebo navrhnout vylepšení vztahující se k appletu Netspeed nebo této příručce, zašlete e-mail Jörgenu Scheibengruberovi. Applet Netspeed O appletu Netspeed
Netspeed Netspeed.
Applet Netspeed zobrazující souhrn na panelu vysokém 48 px. Applet Netspeed zobrazující souhrn na panelu vysokém 48 px.
Applet Netspeed zobrazuje síťový provoz na určených zařízeních, jako jsou eth0, ppp0, plip0 atd. Navíc poskytuje informace o nastavení síťového zařízení. Ikony Netspeed na panelu Ikona Popis Loopback Rozhraní místní smyčky loopback. Ethernet Ethernetové připojení. PPP Připojení pomocí protokolu Point to Point. Bezdrát Bezdrátové připojení PLIP Připojení přes Parallel Line Internet Protocol. Jak přidat Netspeed na panel Když chcete applet Netspeed přidat na panel, klikněte na něj pravým tlačítkem a po té zvolte Přidat na panelSíťapplet Netspeed. Předvolby
Předvolby appletu Netspeed Předvolby appletu Netspeed.
V tomto dialogovém okně můžete měnit nastavení appletu Netspeed: Síťové zařízení: Zvolte v rozbalovacím seznamu síťové zařízení, které by měl applet sledovat. Obvykle jsou vypsaná všechna dostupná zařízení, můžete ale zadat i vlastní. Interval aktualizace: Zadejte prodlevu mezi dvěma aktualizacemi appletu. Velikost písma popisků: Zadejte velikost textu zobrazeného v appletu. Ukazovat celkový souhrn místo údajů pro vstup a výstup: Toto zaškrtněte, pokud chcete, aby applet zobrazoval souhrn přijatých a odeslaných dat. V tomto případě bude applet zabírat na panelu pouze poloviční prostor. Zobrazovat bity místo bajtů: Toto zaškrtněte, pokud chcete aby applet zobrazovat bity za sekundu namísto bajtů za sekundu. Měnit ikonu podle vybraného zařízení: Obvykle applet zobrazuje ikonu představující typ síťového zařízení, které sledujete. Takže se zobrazí telefon pro připojení Point to Point (ppp - modemy atd.) a síťová karta pro ethernet (eth) atd. Pokud tato možnost není zaškrtnutá, applet bude vždy zobrazovat ikonu síťové karty a ne odpovídající sledovanému zařízení. Vždy sledovat připojená zařízení, pokud to jde: Pokud je vaše připojení vypnuté, vyhledá applet Netspeed jiné běžící, které bude sledovat. Dialogové okno s podrobnostmi
Dialogové okno s podrobnostmi Dialogové okno s podrobnostmi
Toto dialogové okno vám zobrazí některé užitečné informace o nastavení vašeho síťového zařízení. Internetová adresa: Adresa IP (Internte Protocol) síťového zařízení. Síťová maska: Síťová maska, která závisí na velikosti vaší místní sítě LAN (Local Area Network). Obvyklá hodnota je 255.255.255.0 (síť třídy C). Hardwarová adresa: Často také označovaná jako fyzická adresa nebo adresa MAC (Media Access Control). Celosvětově jedinečný identifikátor vaší síťové karty. Adresa P-t-P: Internetová adresa „protější strany“ vašeho připojení PPP (Point to Point Protocol). Bajtů dovnitř: Celkový počet bajtů, které byly přijaty skrz síťové zařízení od chvíle, kdy bylo připojeno k síti. Bajtů ven: Celkový počet bajtů, které byly poslány skrz síťové zařízení od chvíle, kdy bylo připojeno k síti.
netspeed_applet-0.16/help/cs/cs.po0000644000175000017500000005210611402462046014042 00000000000000# Czech translation for netspeed. # Copyright (C) 2010 netspeed's COPYRIGHT HOLDER # This file is distributed under the same license as the netspeed package. # Marek Černocký , 2010. # msgid "" msgstr "" "Project-Id-Version: netspeed master\n" "POT-Creation-Date: 2010-02-18 12:26+0000\n" "PO-Revision-Date: 2010-02-25 19:50+0100\n" "Last-Translator: Marek Černocký \n" "Language-Team: Czech \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" #. When image changes, this message will be marked fuzzy or untranslated for you. #. It doesn't matter what you translate it to: it's not used at all. #: C/netspeed_applet.xml:132(None) msgid "" "@@image: 'figures/netspeed_applet.png'; md5=11ef0533a2be1a5d1a9de77c4cec7f93" msgstr "" "@@image: 'figures/netspeed_applet.png'; md5=11ef0533a2be1a5d1a9de77c4cec7f93" #. When image changes, this message will be marked fuzzy or untranslated for you. #. It doesn't matter what you translate it to: it's not used at all. #: C/netspeed_applet.xml:144(None) msgid "@@image: 'figures/eth_sum_48.png'; md5=5113ce28da9b7712dafc52b3c13ccf32" msgstr "" "@@image: 'figures/eth_sum_48.png'; md5=5113ce28da9b7712dafc52b3c13ccf32" #. When image changes, this message will be marked fuzzy or untranslated for you. #. It doesn't matter what you translate it to: it's not used at all. #: C/netspeed_applet.xml:173(None) msgid "@@image: 'figures/loopback.png'; md5=0636b7d65b0626ee5e92dc0d28be5871" msgstr "@@image: 'figures/loopback.png'; md5=0636b7d65b0626ee5e92dc0d28be5871" #. When image changes, this message will be marked fuzzy or untranslated for you. #. It doesn't matter what you translate it to: it's not used at all. #: C/netspeed_applet.xml:185(None) msgid "@@image: 'figures/ethernet.png'; md5=48562a8b38e8eca91a3a8ee4ba4e3077" msgstr "@@image: 'figures/ethernet.png'; md5=48562a8b38e8eca91a3a8ee4ba4e3077" #. When image changes, this message will be marked fuzzy or untranslated for you. #. It doesn't matter what you translate it to: it's not used at all. #: C/netspeed_applet.xml:197(None) msgid "@@image: 'figures/ppp.png'; md5=b88d98a9ccdd489d91b45c8cf2dcbad1" msgstr "@@image: 'figures/ppp.png'; md5=b88d98a9ccdd489d91b45c8cf2dcbad1" #. When image changes, this message will be marked fuzzy or untranslated for you. #. It doesn't matter what you translate it to: it's not used at all. #: C/netspeed_applet.xml:209(None) msgid "@@image: 'figures/wavelan.png'; md5=90f925a64abe393adc5834fceba515fe" msgstr "@@image: 'figures/wavelan.png'; md5=90f925a64abe393adc5834fceba515fe" #. When image changes, this message will be marked fuzzy or untranslated for you. #. It doesn't matter what you translate it to: it's not used at all. #: C/netspeed_applet.xml:221(None) msgid "@@image: 'figures/plip.png'; md5=0761a22dfa7b0b56e41e020cd701db68" msgstr "@@image: 'figures/plip.png'; md5=0761a22dfa7b0b56e41e020cd701db68" #. When image changes, this message will be marked fuzzy or untranslated for you. #. It doesn't matter what you translate it to: it's not used at all. #: C/netspeed_applet.xml:249(None) msgid "@@image: 'figures/settings.png'; md5=219a6bc0e89cb9634d49025f9d3c6604" msgstr "@@image: 'figures/settings.png'; md5=219a6bc0e89cb9634d49025f9d3c6604" #. When image changes, this message will be marked fuzzy or untranslated for you. #. It doesn't matter what you translate it to: it's not used at all. #: C/netspeed_applet.xml:296(None) msgid "@@image: 'figures/details.png'; md5=60fedda8f88b634f16ab31090b5bdd67" msgstr "@@image: 'figures/details.png'; md5=60fedda8f88b634f16ab31090b5bdd67" #: C/netspeed_applet.xml:24(title) msgid "Netspeed Applet Manual V1.1" msgstr "Příručka appletu Netspeed verze 1.1" #: C/netspeed_applet.xml:26(para) msgid "" "Netspeed Applet is shows how much traffic occurs on a specified network " "device." msgstr "Applet Netspeed zobrazuje úroveň provozu na zadaném síťovém zařízení." #: C/netspeed_applet.xml:29(year) C/netspeed_applet.xml:102(date) msgid "2002" msgstr "2002" #: C/netspeed_applet.xml:30(holder) msgid "Jörgen Scheibengruber" msgstr "Jörgen Scheibengruber" #: C/netspeed_applet.xml:41(publishername) msgid "GNOME Documentation Project" msgstr "Dokumentační projekt GNOME" #: C/netspeed_applet.xml:2(para) msgid "" "Permission is granted to copy, distribute and/or modify this document under " "the terms of the GNU Free Documentation License (GFDL), Version 1.1 or any " "later version published by the Free Software Foundation with no Invariant " "Sections, no Front-Cover Texts, and no Back-Cover Texts. You can find a copy " "of the GFDL at this link or " "in the file COPYING-DOCS distributed with this manual." msgstr "" "Je povoleno kopírovat, šířit a/nebo upravovat tento dokument za podmínek GNU " "Free Documentation License, verze 1.1 nebo jakékoli další verze vydané " "nadací Free Software Foundation; bez neměnných oddílů, bez textů předních " "desek a bez textů zadních desek. Kopie této licence je zahrnuta v oddílu " "jménem GNU Free Documentation " "License nebo v souboru COPYING-DOCS dodávaném s touto příručkou." #: C/netspeed_applet.xml:12(para) msgid "" "This manual is part of a collection of GNOME manuals distributed under the " "GFDL. If you want to distribute this manual separately from the collection, " "you can do so by adding a copy of the license to the manual, as described in " "section 6 of the license." msgstr "" "Tato příručka je součástí kolekce příruček GNOME, distribuovaných pod " "licencí GNU FDL. Pokud chcete tento dokument šířit odděleně od kolekce, " "musíte přiložit kopii licence dle popisu v sekci 6 dané licence." #: C/netspeed_applet.xml:19(para) msgid "" "Many of the names used by companies to distinguish their products and " "services are claimed as trademarks. Where those names appear in any GNOME " "documentation, and the members of the GNOME Documentation Project are made " "aware of those trademarks, then the names are in capital letters or initial " "capital letters." msgstr "" "Mnoho užívaných jmen určených k zviditelnění produktů nebo služeb jsou " "ochranné známky. Na místech, kde jsou tato jména v dokumentaci užita a " "členové Dokumentačního projektu GNOME jsou si vědomi skutečnosti, že se " "jedná o ochrannou známku, je takové jméno psáno velkými písmeny celé nebo s " "velkým písmenem na začátku." #: C/netspeed_applet.xml:35(para) msgid "" "DOCUMENT IS PROVIDED ON AN \"AS IS\" BASIS, WITHOUT WARRANTY OF ANY KIND, " "EITHER EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES THAT " "THE DOCUMENT OR MODIFIED VERSION OF THE DOCUMENT IS FREE OF DEFECTS " "MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE OR NON-INFRINGING. THE ENTIRE " "RISK AS TO THE QUALITY, ACCURACY, AND PERFORMANCE OF THE DOCUMENT OR " "MODIFIED VERSION OF THE DOCUMENT IS WITH YOU. SHOULD ANY DOCUMENT OR " "MODIFIED VERSION PROVE DEFECTIVE IN ANY RESPECT, YOU (NOT THE INITIAL " "WRITER, AUTHOR OR ANY CONTRIBUTOR) ASSUME THE COST OF ANY NECESSARY " "SERVICING, REPAIR OR CORRECTION. THIS DISCLAIMER OF WARRANTY CONSTITUTES AN " "ESSENTIAL PART OF THIS LICENSE. NO USE OF ANY DOCUMENT OR MODIFIED VERSION " "OF THE DOCUMENT IS AUTHORIZED HEREUNDER EXCEPT UNDER THIS DISCLAIMER; AND" msgstr "" "DOKUMENT JE POSKYTOVÁN V PODOBĚ „JAK JE“ BEZ ZÁRUKY V JAKÉKOLIV PODOBĚ, " "NEPOSKYTUJÍ SE ANI ODVOZENÉ ZÁRUKY, ZÁRUKY, ŽE DOKUMENT, NEBO JEHO UPRAVENÁ " "VERZE, JE BEZCHYBNÝ NEBO ZÁRUKY PRODEJNOSTI, VHODNOSTI PRO URČITÝ ÚČEL NEBO " "NEPORUŠENOSTI. RIZIKO NEKVALITY, NEPŘESNOSTI A ŠPATNÉHO PROVEDENÍ DOKUMENTU, " "NEBO JEHO UPRAVENÉ VERZE, LEŽÍ NA VÁS. POKUD KVŮLI TOMUTO DOKUMENTU, NEBO " "JEHO UPRAVENÉ VERZI, NASTANE PROBLÉM, VY (NIKOLIV PŮVODNÍ AUTOR NEBO " "JAKÝKOLIV PŘISPĚVATEL) PŘEBÍRÁTE JAKÉKOLIV NÁKLADY ZA NUTNÉ ÚPRAVY, OPRAVY " "ČI SLUŽBY. TOTO PROHLÁŠENÍ O ZÁRUCE PŘEDSTAVUJE ZÁKLADNÍ SOUČÁST TÉTO " "LICENCE. BEZ TOHOTO PROHLÁŠENÍ NENÍ, PODLE TÉTO DOHODY, POVOLENO UŽÍVÁNÍ ANI " "ÚPRAVY TOHOTO DOKUMENTU; DÁLE" #: C/netspeed_applet.xml:55(para) msgid "" "UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, WHETHER IN TORT (INCLUDING " "NEGLIGENCE), CONTRACT, OR OTHERWISE, SHALL THE AUTHOR, INITIAL WRITER, ANY " "CONTRIBUTOR, OR ANY DISTRIBUTOR OF THE DOCUMENT OR MODIFIED VERSION OF THE " "DOCUMENT, OR ANY SUPPLIER OF ANY OF SUCH PARTIES, BE LIABLE TO ANY PERSON " "FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF " "ANY CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF GOODWILL, " "WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, OR ANY AND ALL OTHER DAMAGES " "OR LOSSES ARISING OUT OF OR RELATING TO USE OF THE DOCUMENT AND MODIFIED " "VERSIONS OF THE DOCUMENT, EVEN IF SUCH PARTY SHALL HAVE BEEN INFORMED OF THE " "POSSIBILITY OF SUCH DAMAGES." msgstr "" "ZA ŽÁDNÝCH OKOLNOSTÍ A ŽÁDNÝCH PRÁVNÍCH PŘEDPOKLADŮ, AŤ SE JEDNÁ O PŘEČIN " "(VČETNĚ NEDBALOSTNÍCH), SMLOUVU NEBO JINÉ, NENÍ AUTOR, PŮVODNÍ PISATEL, " "KTERÝKOLIV PŘISPĚVATEL NEBO KTERÝKOLIV DISTRIBUTOR TOHOTO DOKUMENTU NEBO " "UPRAVENÉ VERZE DOKUMENTU NEBO KTERÝKOLIV DODAVATEL NĚKTERÉ Z TĚCHTO STRAN " "ODPOVĚDNÝ NĚJAKÉ OSOBĚ ZA PŘÍMÉ, NEPŘÍMÉ, SPECIÁLNÍ, NAHODILÉ NEBO NÁSLEDNÉ " "ŠKODY JAKÉHOKOLIV CHARAKTERU, VČETNĚ, ALE NEJEN, ZA POŠKOZENÍ ZE ZTRÁTY " "DOBRÉHO JMÉNA, PŘERUŠENÍ PRÁCE, PORUCHY NEBO NESPRÁVNÉ FUNKCE POČÍTAČE NEBO " "JINÉHO A VŠECH DALŠÍCH ŠKOD NEBO ZTRÁT VYVSTÁVAJÍCÍCH Z NEBO VZTAHUJÍCÍCH SE " "K POUŽÍVÁNÍ TOHOTO DOKUMENTU NEBO UPRAVENÝCH VERZÍ DOKUMENTU, I KDYŽ BY " "TAKOVÁTO STRANA BYLA INFORMOVANÁ O MOŽNOSTI TAKOVÉHOTO POŠKOZENÍ." #: C/netspeed_applet.xml:28(para) msgid "" "DOCUMENT AND MODIFIED VERSIONS OF THE DOCUMENT ARE PROVIDED UNDER THE TERMS " "OF THE GNU FREE DOCUMENTATION LICENSE WITH THE FURTHER UNDERSTANDING THAT: " "" msgstr "" "DOKUMENT A JEHO UPRAVENÉ VERZE JSOU ŠÍŘENY V SOULADU SE ZNĚNÍM LICENCE GNU " "FREE DOCUMENTATION LICENSE S NÁSLEDUJÍCÍM USTANOVENÍM: " #: C/netspeed_applet.xml:48(firstname) C/netspeed_applet.xml:84(firstname) #: C/netspeed_applet.xml:104(firstname) msgid "Jörgen" msgstr "Jörgen" #: C/netspeed_applet.xml:49(surname) C/netspeed_applet.xml:85(surname) #: C/netspeed_applet.xml:105(surname) msgid "Scheibengruber" msgstr "Scheibengruber" #: C/netspeed_applet.xml:51(orgname) C/netspeed_applet.xml:60(orgname) msgid "GNOME Project" msgstr "Projekt GNOME" #: C/netspeed_applet.xml:53(email) C/netspeed_applet.xml:86(email) #: C/netspeed_applet.xml:106(email) msgid "mfcn@gmx.de" msgstr "mfcn@gmx.de" #: C/netspeed_applet.xml:57(firstname) C/netspeed_applet.xml:94(firstname) msgid "Pedro" msgstr "Pedro" #: C/netspeed_applet.xml:58(surname) C/netspeed_applet.xml:95(surname) msgid "Villavicencio Garrido" msgstr "Villavicencio Garrido" #: C/netspeed_applet.xml:62(email) C/netspeed_applet.xml:96(email) msgid "pvillavi@gnome.org" msgstr "pvillavi@gnome.org" #: C/netspeed_applet.xml:81(revnumber) msgid "1.2" msgstr "1.2" #: C/netspeed_applet.xml:82(date) msgid "2006" msgstr "2006" #: C/netspeed_applet.xml:91(revnumber) msgid "1.1" msgstr "1.1" #: C/netspeed_applet.xml:92(date) msgid "2005" msgstr "2005" #: C/netspeed_applet.xml:101(revnumber) msgid "1.0" msgstr "1.0" #: C/netspeed_applet.xml:112(releaseinfo) msgid "This manual describes version 0.12 of Netspeed Applet." msgstr "Tato příručka popisuje applet Netspeed ve verzi 0.12." #: C/netspeed_applet.xml:115(title) msgid "Feedback" msgstr "Ohlasy" #: C/netspeed_applet.xml:116(para) msgid "" "To report a bug or make a suggestion regarding the Netspeed Applet applet or " "this manual, send a e-mail to Jörgen Scheibengruber." msgstr "" "Pokud chcete oznámit chybu nebo navrhnout vylepšení vztahující se k appletu " "Netspeed nebo této příručce, zašlete e-mail Jörgenu Scheibengruberovi." #: C/netspeed_applet.xml:122(primary) msgid "Netspeed Applet" msgstr "Applet Netspeed" #: C/netspeed_applet.xml:127(title) msgid "About Netspeed Applet" msgstr "O appletu Netspeed" #: C/netspeed_applet.xml:129(title) msgid "Netspeed" msgstr "Netspeed" #: C/netspeed_applet.xml:135(phrase) msgid "Netspeed." msgstr "Netspeed." #: C/netspeed_applet.xml:141(title) C/netspeed_applet.xml:147(phrase) msgid "Netspeed showing the sum in a 48px panel." msgstr "Applet Netspeed zobrazující souhrn na panelu vysokém 48 px." #: C/netspeed_applet.xml:152(para) msgid "" "Netspeed Applet displays the network traffic on a " "specified device like eth0, ppp0, plip0, etc. More over it provides " "information about the configuration of the network device." msgstr "" "Applet Netspeed zobrazuje síťový provoz na " "určených zařízeních, jako jsou eth0, ppp0, plip0 atd. Navíc poskytuje " "informace o nastavení síťového zařízení." #: C/netspeed_applet.xml:158(title) msgid "Netspeed Icons on Panel" msgstr "Ikony Netspeed na panelu" #: C/netspeed_applet.xml:165(para) msgid "Icon" msgstr "Ikona" #: C/netspeed_applet.xml:166(para) msgid "Description" msgstr "Popis" #: C/netspeed_applet.xml:175(phrase) msgid "Loopback" msgstr "Loopback" #: C/netspeed_applet.xml:178(para) msgid "The Loopback interface." msgstr "Rozhraní místní smyčky loopback." #: C/netspeed_applet.xml:187(phrase) msgid "Ethernet" msgstr "Ethernet" #: C/netspeed_applet.xml:190(para) msgid "Ethernet connection." msgstr "Ethernetové připojení." #: C/netspeed_applet.xml:199(phrase) msgid "PPP" msgstr "PPP" #: C/netspeed_applet.xml:202(para) msgid "Point to Point Protocol connection." msgstr "Připojení pomocí protokolu Point to Point." #: C/netspeed_applet.xml:211(phrase) msgid "Wireless" msgstr "Bezdrát" #: C/netspeed_applet.xml:214(para) msgid "Wireless connection." msgstr "Bezdrátové připojení" #: C/netspeed_applet.xml:223(phrase) msgid "PLIP" msgstr "PLIP" #: C/netspeed_applet.xml:226(para) msgid "Parallel Line Internet Protocol connection." msgstr "Připojení přes Parallel Line Internet Protocol." #: C/netspeed_applet.xml:235(title) msgid "To Add Netspeed to a Panel" msgstr "Jak přidat Netspeed na panel" #: C/netspeed_applet.xml:236(para) msgid "" "To add Netspeed Applet to a panel, right-click on " "the panel, then choose Add to PanelNetworkNetspeed Applet." msgstr "" "Když chcete applet Netspeed přidat na panel, " "klikněte na něj pravým tlačítkem a po té zvolte Přidat " "na panelSíťapplet Netspeed." #: C/netspeed_applet.xml:244(title) msgid "Settings" msgstr "Předvolby" #: C/netspeed_applet.xml:246(title) msgid "Netspeed Applet Settings" msgstr "Předvolby appletu Netspeed" #: C/netspeed_applet.xml:252(phrase) msgid "Netspeed Applet Settings." msgstr "Předvolby appletu Netspeed." #: C/netspeed_applet.xml:257(para) msgid "In this dialog you can change the settings of Netspeed Applet:" msgstr "V tomto dialogovém okně můžete měnit nastavení appletu Netspeed:" #: C/netspeed_applet.xml:261(para) msgid "" "Network device: Choose the network device that the " "applet should monitor from the popdown list of the combobox. Usually all " "available devices are listed, however you can enter one yourself, too." msgstr "" "Síťové zařízení: Zvolte v rozbalovacím seznamu síťové " "zařízení, které by měl applet sledovat. Obvykle jsou vypsaná všechna " "dostupná zařízení, můžete ale zadat i vlastní." #: C/netspeed_applet.xml:265(para) msgid "" "Update interval: Enter the time between two updates of " "the applet." msgstr "" "Interval aktualizace: Zadejte prodlevu mezi dvěma " "aktualizacemi appletu." #: C/netspeed_applet.xml:268(para) msgid "" "Label font size: Enter the size of the text displayed " "in the applet." msgstr "" "Velikost písma popisků: Zadejte velikost textu " "zobrazeného v appletu." #: C/netspeed_applet.xml:271(para) msgid "" "Show sum instead of in and out: If you check this box " "then the applet will show the sum of the in and out rate. The applet will " "take only half of the space in the panel in this case." msgstr "" "Ukazovat celkový souhrn místo údajů pro vstup a výstup: " "Toto zaškrtněte, pokud chcete, aby applet zobrazoval souhrn přijatých a " "odeslaných dat. V tomto případě bude applet zabírat na panelu pouze " "poloviční prostor." #: C/netspeed_applet.xml:275(para) msgid "" "Show bits/s (b/s) instead of bytes/s (B/s): Check this " "if you want the applet to display bits per second instead of bytes/s." msgstr "" "Zobrazovat bity místo bajtů: Toto zaškrtněte, pokud " "chcete aby applet zobrazovat bity za sekundu namísto bajtů za sekundu." #: C/netspeed_applet.xml:279(para) msgid "" "Change icon according to the selected device: Usually " "the applet will show an icon representing the type of network device you " "monitor. So it will show a phone for Point to Point connections (ppp - " "modems, etc.), a network card for ethernet (eth), etc. When this is " "unchecked, the applet will always show the network card icon, no matter " "which device you monitor." msgstr "" "Měnit ikonu podle vybraného zařízení: Obvykle applet " "zobrazuje ikonu představující typ síťového zařízení, které sledujete. Takže " "se zobrazí telefon pro připojení Point to Point (ppp - modemy atd.) a síťová " "karta pro ethernet (eth) atd. Pokud tato možnost není zaškrtnutá, applet " "bude vždy zobrazovat ikonu síťové karty a ne odpovídající sledovanému " "zařízení." #: C/netspeed_applet.xml:285(para) msgid "" "Always monitor a connected device, if possible: When " "your connection is down, Netspeed Applet look for a running one for " "monitoring." msgstr "" "Vždy sledovat připojená zařízení, pokud to jde: Pokud " "je vaše připojení vypnuté, vyhledá applet Netspeed jiné běžící, které bude " "sledovat." #: C/netspeed_applet.xml:291(title) C/netspeed_applet.xml:293(title) #: C/netspeed_applet.xml:299(phrase) msgid "The details dialog" msgstr "Dialogové okno s podrobnostmi" #: C/netspeed_applet.xml:304(para) msgid "" "This dialog shows you some useful information on the configuration of your " "network device." msgstr "" "Toto dialogové okno vám zobrazí některé užitečné informace o nastavení " "vašeho síťového zařízení." #: C/netspeed_applet.xml:309(para) msgid "" "Internet Address: The IP (Internet Protocol) address of " "the network device." msgstr "" "Internetová adresa: Adresa IP (Internte Protocol) " "síťového zařízení." #: C/netspeed_applet.xml:312(para) msgid "" "Netmask: The netmask which depends on the size of your " "LAN (Local Area Network). A usual value is 255.255.255.0 (a class C network)." msgstr "" "Síťová maska: Síťová maska, která závisí na velikosti " "vaší místní sítě LAN (Local Area Network). Obvyklá hodnota je 255.255.255.0 " "(síť třídy C)." #: C/netspeed_applet.xml:316(para) msgid "" "Hardware Address: Often also referred to as the " "physical or MAC (Media Access Control) address. A worldwide unique " "identifier for your network card." msgstr "" "Hardwarová adresa: Často také označovaná jako fyzická " "adresa nebo adresa MAC (Media Access Control). Celosvětově jedinečný " "identifikátor vaší síťové karty." #: C/netspeed_applet.xml:320(para) msgid "" "P-t-P Address: The internet address of the \"other side" "\" of your PPP (Point to Point Protocol) connection." msgstr "" "Adresa P-t-P: Internetová adresa „protější strany“ " "vašeho připojení PPP (Point to Point Protocol)." #: C/netspeed_applet.xml:324(para) msgid "" "Bytes in: The amount of bytes that the network device " "has received since it has been connected to the network." msgstr "" "Bajtů dovnitř: Celkový počet bajtů, které byly přijaty " "skrz síťové zařízení od chvíle, kdy bylo připojeno k síti." #: C/netspeed_applet.xml:328(para) msgid "" "Bytes out: The amout of bytes that the network device " "has sent since it has been connected to the network." msgstr "" "Bajtů ven: Celkový počet bajtů, které byly poslány skrz " "síťové zařízení od chvíle, kdy bylo připojeno k síti." #. Put one translator per line, in the form of NAME , YEAR1, YEAR2 #: C/netspeed_applet.xml:0(None) msgid "translator-credits" msgstr "Marek Černocký, 2010" netspeed_applet-0.16/help/ChangeLog0000644000175000017500000000320211402426203014226 000000000000002009-04-18 Mario Blättermann * de/de.po: Updated German translation 2009-01-01 Leonardo Ferreira Fontenelle * pt_BR/pt_BR.po: Updated Brazilian Portuguese translation. Contributed by Enrico Nicoletto and myself. 2008-11-15 Jorge Gonzalez * Makefile.am: Added es to DOC_LINGUAS 2008-08-24 Jörgen Scheibengruber * Makefile.am: Remove es for now, it breaks the build 2008-05-27 Jonh Wendell * Makefile.am: Added pt_BR to DOC_LINGUAS. * pt_BR/figures/*.png: * pt_BR/pt_BR.po: Added Brazilian Portuguese translation by Leonardo Gregianin. 2008-04-13 Claude Paroz * Makefile.am: Added fr to DOC_LINGUAS. * fr/figures/*.png: * fr/fr.po: Added French translation. 2008-03-18 Simos Xenitellis * el/el.po: Added Greek translation by Giannis Katsampiris, reviewed translation. * Makefile.am: Added el to DOC_LINGUAS. 2008-03-05 Jorge Gonzalez * es/es.po: Added Spanish translation by Daniel Mustieles 2008-02-16 Jaap Haitsma,,, reviewed by: * .cvsignore: * C/.cvsignore: * cs/.cvsignore: * de/.cvsignore: * es/.cvsignore: * ru/.cvsignore: 2006-09-25 Daniel Nylander * sv/sv.po: Added Swedish translation. * sv/figures/*png: Added screenshots. * Makefile.am: Added sv to DOC_LINGUAS. 2006-09-24 Joergen Scheibengruber * Migration to gnome-doc-utils: Translations have to be adapted! (see INSTRUCTIONS) * de/de.po: Initial not completed migration netspeed_applet-0.16/help/Makefile.in0000644000175000017500000007663111402461242014543 00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ # gnome-doc-utils.make - make magic for building documentation # Copyright (C) 2004-2005 Shaun McCance # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software Foundation, # Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. ################################################################################ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ $(top_srcdir)/gnome-doc-utils.make ChangeLog subdir = help ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = SOURCES = DIST_SOURCES = DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ ALL_LINGUAS = @ALL_LINGUAS@ AMTAR = @AMTAR@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CATALOGS = @CATALOGS@ CATOBJEXT = @CATOBJEXT@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ DOC_USER_FORMATS = @DOC_USER_FORMATS@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GMOFILES = @GMOFILES@ GMSGFMT = @GMSGFMT@ GREP = @GREP@ HELP_DIR = @HELP_DIR@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTOBJEXT = @INSTOBJEXT@ INTLLIBS = @INTLLIBS@ INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ INTLTOOL_MERGE = @INTLTOOL_MERGE@ INTLTOOL_PERL = @INTLTOOL_PERL@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ IWLIB = @IWLIB@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ MKINSTALLDIRS = @MKINSTALLDIRS@ MSGFMT = @MSGFMT@ MSGFMT_OPTS = @MSGFMT_OPTS@ MSGMERGE = @MSGMERGE@ NETSPEED_APPLET_CFLAGS = @NETSPEED_APPLET_CFLAGS@ NETSPEED_APPLET_LIBS = @NETSPEED_APPLET_LIBS@ NETSPEED_CFLAGS = @NETSPEED_CFLAGS@ NETSPEED_LIBS = @NETSPEED_LIBS@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OMF_DIR = @OMF_DIR@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ POFILES = @POFILES@ POSUB = @POSUB@ PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ XGETTEXT = @XGETTEXT@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ _clean_doc_header = $(if $(DOC_H_FILE),clean-doc-header) _DOC_REAL_FORMATS = $(if $(DOC_USER_FORMATS),$(DOC_USER_FORMATS),$(DOC_FORMATS)) _DOC_REAL_LINGUAS = $(if $(filter environment,$(origin LINGUAS)), \ $(filter $(LINGUAS),$(DOC_LINGUAS)), \ $(DOC_LINGUAS)) _DOC_ABS_SRCDIR = @abs_srcdir@ _xml2po_mode = $(if $(DOC_ID),mallard,docbook) @ENABLE_SK_TRUE@_ENABLE_SK = true ################################################################################ db2omf_args = \ --stringparam db2omf.basename $(DOC_MODULE) \ --stringparam db2omf.format $(3) \ --stringparam db2omf.dtd \ $(shell xmllint --format $(2) | grep -h PUBLIC | head -n 1 \ | sed -e 's/.*PUBLIC \(\"[^\"]*\"\).*/\1/') \ --stringparam db2omf.lang $(notdir $(patsubst %/$(notdir $(2)),%,$(2))) \ --stringparam db2omf.omf_dir "$(OMF_DIR)" \ --stringparam db2omf.help_dir "$(HELP_DIR)" \ --stringparam db2omf.omf_in "$(_DOC_OMF_IN)" \ $(if $(_ENABLE_SK), \ --stringparam db2omf.scrollkeeper_cl "$(_skcontentslist)") \ $(_db2omf) $(2) _DOC_OMF_IN = $(if $(DOC_MODULE),$(wildcard $(_DOC_ABS_SRCDIR)/$(DOC_MODULE).omf.in)) _DOC_OMF_DB = $(if $(_DOC_OMF_IN), \ $(foreach lc,C $(_DOC_REAL_LINGUAS),$(DOC_MODULE)-$(lc).omf)) _DOC_OMF_HTML = $(if $(_DOC_OMF_IN), \ $(foreach lc,C $(_DOC_REAL_LINGUAS),$(DOC_MODULE)-html-$(lc).omf)) # FIXME _DOC_OMF_ALL = \ $(if $(filter docbook,$(_DOC_REAL_FORMATS)),$(_DOC_OMF_DB)) \ $(if $(filter html HTML,$(_DOC_REAL_FORMATS)),$(_DOC_OMF_HTML)) ################################################################################ _DOC_C_MODULE = $(if $(DOC_MODULE),C/$(DOC_MODULE).xml) _DOC_C_PAGES = $(foreach page,$(DOC_PAGES),C/$(page)) _DOC_C_ENTITIES = $(foreach ent,$(DOC_ENTITIES),C/$(ent)) _DOC_C_INCLUDES = $(foreach inc,$(DOC_INCLUDES),C/$(inc)) _DOC_C_DOCS = \ $(_DOC_C_ENTITIES) $(_DOC_C_INCLUDES) \ $(_DOC_C_PAGES) $(_DOC_C_MODULE) _DOC_C_DOCS_NOENT = \ $(_DOC_C_MODULE) $(_DOC_C_INCLUDES) \ $(_DOC_C_PAGES) _DOC_C_FIGURES = $(if $(DOC_FIGURES), \ $(foreach fig,$(DOC_FIGURES),C/$(fig)), \ $(patsubst $(srcdir)/%,%,$(wildcard $(srcdir)/C/figures/*.png))) # FIXME: probably have to shell escape to determine the file names _DOC_C_HTML = $(foreach f, \ $(shell xsltproc --xinclude \ --stringparam db.chunk.basename "$(DOC_MODULE)" \ $(_chunks) "C/$(DOC_MODULE).xml"), \ C/$(f).xhtml) ############################################################################### _DOC_POFILES = $(if $(DOC_MODULE)$(DOC_ID), \ $(foreach lc,$(_DOC_REAL_LINGUAS),$(lc)/$(lc).po)) _DOC_MOFILES = $(patsubst %.po,%.mo,$(_DOC_POFILES)) _DOC_LC_MODULES = $(if $(DOC_MODULE), \ $(foreach lc,$(_DOC_REAL_LINGUAS),$(lc)/$(DOC_MODULE).xml)) _DOC_LC_PAGES = \ $(foreach lc,$(_DOC_REAL_LINGUAS),$(foreach page,$(_DOC_C_PAGES), \ $(lc)/$(notdir $(page)) )) _DOC_LC_INCLUDES = \ $(foreach lc,$(_DOC_REAL_LINGUAS),$(foreach inc,$(_DOC_C_INCLUDES), \ $(lc)/$(notdir $(inc)) )) # FIXME: probably have to shell escape to determine the file names _DOC_LC_HTML = \ $(foreach lc,$(_DOC_REAL_LINGUAS),$(foreach doc,$(_DOC_C_HTML), \ $(lc)/$(notdir $(doc)) )) _DOC_LC_DOCS = \ $(_DOC_LC_MODULES) $(_DOC_LC_INCLUDES) $(_DOC_LC_PAGES) \ $(if $(filter html HTML,$(_DOC_REAL_FORMATS)),$(_DOC_LC_HTML)) _DOC_LC_FIGURES = $(foreach lc,$(_DOC_REAL_LINGUAS), \ $(patsubst C/%,$(lc)/%,$(_DOC_C_FIGURES)) ) _DOC_SRC_FIGURES = \ $(foreach fig,$(_DOC_C_FIGURES), $(foreach lc,C $(_DOC_REAL_LINGUAS), \ $(wildcard $(srcdir)/$(lc)/$(patsubst C/%,%,$(fig))) )) _DOC_POT = $(if $(DOC_MODULE),$(DOC_MODULE).pot) ################################################################################ _DOC_HTML_ALL = $(if $(filter html HTML,$(_DOC_REAL_FORMATS)), \ $(_DOC_C_HTML) $(_DOC_LC_HTML)) _DOC_HTML_TOPS = $(foreach lc,C $(_DOC_REAL_LINGUAS),$(lc)/$(DOC_MODULE).xhtml) _clean_omf = $(if $(_DOC_OMF_IN),clean-doc-omf) _clean_dsk = $(if $(_DOC_DSK_IN),clean-doc-dsk) _clean_lc = $(if $(_DOC_REAL_LINGUAS),clean-doc-lc) _clean_dir = $(if $(DOC_MODULE)$(DOC_ID),clean-doc-dir) _doc_install_dir = $(if $(DOC_ID),$(DOC_ID),$(DOC_MODULE)) DOC_MODULE = netspeed_applet DOC_ENTITIES = legal.xml DOC_INCLUDES = DOC_FIGURES = \ figures/details.png \ figures/ethernet.png \ figures/eth_sum_48.png \ figures/loopback.png \ figures/netspeed_applet.png \ figures/plip.png \ figures/ppp.png \ figures/settings.png \ figures/wavelan.png DOC_LINGUAS = cs de el es fr pt_BR sv # Migration needed (see INSTRUCTIONS http://live.gnome.org/GnomeDocUtilsTranslationMigration) # DOC_LINGUAS = ru # EXTRA_DIST = INSTRUCTIONS all: all-am .SUFFIXES: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/gnome-doc-utils.make $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu help/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu help/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs tags: TAGS TAGS: ctags: CTAGS CTAGS: distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$(top_distdir)" distdir="$(distdir)" \ dist-hook check-am: all-am check: check-am all-am: Makefile installdirs: install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libtool clean-local mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic distclean-local dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-data-local install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic \ maintainer-clean-local mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic mostlyclean-libtool \ mostlyclean-local pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-local .MAKE: install-am install-strip .PHONY: all all-am check check-am clean clean-generic clean-libtool \ clean-local dist-hook distclean distclean-generic \ distclean-libtool distclean-local distdir dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-data-local install-dvi install-dvi-am \ install-exec install-exec-am install-html install-html-am \ install-info install-info-am install-man install-pdf \ install-pdf-am install-ps install-ps-am install-strip \ installcheck installcheck-am installdirs maintainer-clean \ maintainer-clean-generic maintainer-clean-local mostlyclean \ mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \ pdf-am ps ps-am uninstall uninstall-am uninstall-local DOC_H_FILE ?= DOC_H_DOCS ?= $(DOC_H_FILE): $(DOC_H_DOCS); @rm -f $@.tmp; touch $@.tmp; echo 'const gchar* documentation_credits[] = {' >> $@.tmp list='$(DOC_H_DOCS)'; for doc in $$list; do \ xmlpath="`echo $$doc | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`:$(srcdir)/`echo $$doc | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`"; \ if ! test -f "$$doc"; then doc="$(srcdir)/$$doc"; fi; \ xsltproc --path "$$xmlpath" $(_credits) $$doc; \ done | sort | uniq \ | awk 'BEGIN{s=""}{n=split($$0,w,"<");if(s!=""&&s!=substr(w[1],1,length(w[1])-1)){print s};if(n>1){print $$0;s=""}else{s=$$0}};END{if(s!=""){print s}}' \ | sed -e 's/\\/\\\\/' -e 's/"/\\"/' -e 's/\(.*\)/\t"\1",/' >> $@.tmp echo ' NULL' >> $@.tmp echo '};' >> $@.tmp echo >> $@.tmp list='$(DOC_H_DOCS)'; for doc in $$list; do \ xmlpath="`echo $$doc | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`:$(srcdir)/`echo $$doc | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`"; \ if ! test -f "$$doc"; then doc="$(srcdir)/$$doc"; fi; \ docid=`echo "$$doc" | sed -e 's/.*\/\([^/]*\)\.xml/\1/' \ | sed -e 's/[^a-zA-Z_]/_/g' | tr 'a-z' 'A-Z'`; \ echo $$xmlpath; \ ids=`xsltproc --xinclude --path "$$xmlpath" $(_ids) $$doc`; \ for id in $$ids; do \ echo '#define HELP_'`echo $$docid`'_'`echo $$id \ | sed -e 's/[^a-zA-Z_]/_/g' | tr 'a-z' 'A-Z'`' "'$$id'"' >> $@.tmp; \ done; \ echo >> $@.tmp; \ done; cp $@.tmp $@ && rm -f $@.tmp dist-check-gdu: @HAVE_GNOME_DOC_UTILS_FALSE@ @echo "*** GNOME Doc Utils must be installed in order to make dist" @HAVE_GNOME_DOC_UTILS_FALSE@ @false .PHONY: dist-doc-header dist-doc-header: $(DOC_H_FILE) @if test -f "$(DOC_H_FILE)"; then d=; else d="$(srcdir)/"; fi; \ echo "$(INSTALL_DATA) $${d}$(DOC_H_FILE) $(distdir)/$(DOC_H_FILE)"; \ $(INSTALL_DATA) "$${d}$(DOC_H_FILE)" "$(distdir)/$(DOC_H_FILE)"; doc-dist-hook: dist-check-gdu $(if $(DOC_H_FILE),dist-doc-header) .PHONY: clean-doc-header clean-local: $(_clean_doc_header) distclean-local: $(_clean_doc_header) mostlyclean-local: $(_clean_doc_header) maintainer-clean-local: $(_clean_doc_header) clean-doc-header: rm -f $(DOC_H_FILE) all: $(DOC_H_FILE) ################################################################################ DOC_MODULE ?= DOC_ID ?= DOC_PAGES ?= DOC_ENTITIES ?= DOC_INCLUDES ?= DOC_FIGURES ?= DOC_FORMATS ?= docbook DOC_LINGUAS ?= ################################################################################ _xml2po ?= `which xml2po` _db2html ?= `$(PKG_CONFIG) --variable db2html gnome-doc-utils` _db2omf ?= `$(PKG_CONFIG) --variable db2omf gnome-doc-utils` _malrng ?= `$(PKG_CONFIG) --variable malrng gnome-doc-utils` _chunks ?= `$(PKG_CONFIG) --variable xmldir gnome-doc-utils`/gnome/xslt/docbook/utils/chunks.xsl _credits ?= `$(PKG_CONFIG) --variable xmldir gnome-doc-utils`/gnome/xslt/docbook/utils/credits.xsl _ids ?= `$(PKG_CONFIG) --variable xmldir gnome-doc-utils`/gnome/xslt/docbook/utils/ids.xsl @ENABLE_SK_TRUE@_skpkgdatadir ?= `scrollkeeper-config --pkgdatadir` @ENABLE_SK_TRUE@_sklocalstatedir ?= `scrollkeeper-config --pkglocalstatedir` @ENABLE_SK_TRUE@_skcontentslist ?= $(_skpkgdatadir)/Templates/C/scrollkeeper_cl.xml $(_DOC_OMF_DB) : $(_DOC_OMF_IN) $(_DOC_OMF_DB) : $(DOC_MODULE)-%.omf : %/$(DOC_MODULE).xml @test "x$(_ENABLE_SK)" != "xtrue" -o -f "$(_skcontentslist)" || { \ echo "The file '$(_skcontentslist)' does not exist." >&2; \ echo "Please check your ScrollKeeper installation." >&2; \ exit 1; } xsltproc -o $@ $(call db2omf_args,$@,$<,'docbook') || { rm -f "$@"; exit 1; } $(_DOC_OMF_HTML) : $(_DOC_OMF_IN) $(_DOC_OMF_HTML) : $(DOC_MODULE)-html-%.omf : %/$(DOC_MODULE).xml @ENABLE_SK_TRUE@ @test "x$(_ENABLE_SK)" != "xtrue" -o -f "$(_skcontentslist)" || { \ @ENABLE_SK_TRUE@ echo "The file '$(_skcontentslist)' does not exist" >&2; \ @ENABLE_SK_TRUE@ echo "Please check your ScrollKeeper installation." >&2; \ @ENABLE_SK_TRUE@ exit 1; } xsltproc -o $@ $(call db2omf_args,$@,$<,'xhtml') || { rm -f "$@"; exit 1; } .PHONY: omf omf: $(_DOC_OMF_ALL) .PHONY: po po: $(_DOC_POFILES) .PHONY: mo mo: $(_DOC_MOFILES) $(_DOC_POFILES): @if ! test -d $(dir $@); then \ echo "mkdir $(dir $@)"; \ mkdir "$(dir $@)"; \ fi @if test ! -f $@ -a -f $(srcdir)/$@; then \ echo "cp $(srcdir)/$@ $@"; \ cp "$(srcdir)/$@" "$@"; \ fi; @docs=; \ list='$(_DOC_C_DOCS_NOENT)'; for doc in $$list; do \ docs="$$docs $(_DOC_ABS_SRCDIR)/$$doc"; \ done; \ if ! test -f $@; then \ echo "(cd $(dir $@) && \ $(_xml2po) -m $(_xml2po_mode) -e $$docs > $(notdir $@).tmp && \ cp $(notdir $@).tmp $(notdir $@) && rm -f $(notdir $@).tmp)"; \ (cd $(dir $@) && \ $(_xml2po) -m $(_xml2po_mode) -e $$docs > $(notdir $@).tmp && \ cp $(notdir $@).tmp $(notdir $@) && rm -f $(notdir $@).tmp); \ else \ echo "(cd $(dir $@) && \ $(_xml2po) -m $(_xml2po_mode) -e -u $(notdir $@) $$docs)"; \ (cd $(dir $@) && \ $(_xml2po) -m $(_xml2po_mode) -e -u $(notdir $@) $$docs); \ fi $(_DOC_MOFILES): %.mo: %.po @if ! test -d $(dir $@); then \ echo "mkdir $(dir $@)"; \ mkdir "$(dir $@)"; \ fi msgfmt -o $@ $< # FIXME: fix the dependancy # FIXME: hook xml2po up $(_DOC_LC_DOCS) : $(_DOC_MOFILES) $(_DOC_LC_DOCS) : $(_DOC_C_DOCS) if ! test -d $(dir $@); then mkdir $(dir $@); fi if [ -f "C/$(notdir $@)" ]; then d="../"; else d="$(_DOC_ABS_SRCDIR)/"; fi; \ mo="$(dir $@)$(patsubst %/$(notdir $@),%,$@).mo"; \ if [ -f "$${mo}" ]; then mo="../$${mo}"; else mo="$(_DOC_ABS_SRCDIR)/$${mo}"; fi; \ (cd $(dir $@) && \ $(_xml2po) -m $(_xml2po_mode) -e -t "$${mo}" \ "$${d}C/$(notdir $@)" > $(notdir $@).tmp && \ cp $(notdir $@).tmp $(notdir $@) && rm -f $(notdir $@).tmp) .PHONY: pot pot: $(_DOC_POT) $(_DOC_POT): $(_DOC_C_DOCS_NOENT) $(_xml2po) -m $(_xml2po_mode) -e -o $@ $^ $(_DOC_HTML_TOPS): $(_DOC_C_DOCS) $(_DOC_LC_DOCS) xsltproc -o $@ --xinclude --param db.chunk.chunk_top "false()" --stringparam db.chunk.basename "$(DOC_MODULE)" --stringparam db.chunk.extension ".xhtml" $(_db2html) $(patsubst %.xhtml,%.xml,$@) ################################################################################ all: \ $(_DOC_C_DOCS) $(_DOC_LC_DOCS) \ $(_DOC_OMF_ALL) $(_DOC_DSK_ALL) \ $(_DOC_HTML_ALL) $(_DOC_POFILES) ################################################################################ .PHONY: clean-doc-omf clean-doc-dsk clean-doc-lc clean-doc-dir clean-doc-omf: ; rm -f $(_DOC_OMF_DB) $(_DOC_OMF_HTML) clean-doc-dsk: ; rm -f $(_DOC_DSK_DB) $(_DOC_DSK_HTML) clean-doc-lc: rm -f $(_DOC_LC_DOCS) rm -f $(_DOC_MOFILES) @list='$(_DOC_POFILES)'; for po in $$list; do \ if ! test "$$po" -ef "$(srcdir)/$$po"; then \ echo "rm -f $$po"; \ rm -f "$$po"; \ fi; \ done # .xml2.po.mo cleaning is obsolete as of 0.18.1 and could be removed in 0.20.x @for lc in C $(_DOC_REAL_LINGUAS); do \ if test -f "$$lc/.xml2po.mo"; then \ echo "rm -f $$lc/.xml2po.mo"; \ rm -f "$$lc/.xml2po.mo"; \ fi; \ done clean-doc-dir: clean-doc-lc @for lc in C $(_DOC_REAL_LINGUAS); do \ for dir in `find $$lc -depth -type d`; do \ if ! test $$dir -ef $(srcdir)/$$dir; then \ echo "rmdir $$dir"; \ rmdir "$$dir"; \ fi; \ done; \ done clean-local: \ $(_clean_omf) $(_clean_dsk) \ $(_clean_lc) $(_clean_dir) distclean-local: \ $(_clean_omf) $(_clean_dsk) \ $(_clean_lc) $(_clean_dir) mostlyclean-local: \ $(_clean_omf) $(_clean_dsk) \ $(_clean_lc) $(_clean_dir) maintainer-clean-local: \ $(_clean_omf) $(_clean_dsk) \ $(_clean_lc) $(_clean_dir) ################################################################################ .PHONY: dist-doc-docs dist-doc-pages dist-doc-figs dist-doc-omf dist-doc-dsk doc-dist-hook: \ $(if $(DOC_MODULE)$(DOC_ID),dist-doc-docs) \ $(if $(_DOC_C_FIGURES),dist-doc-figs) \ $(if $(_DOC_OMF_IN),dist-doc-omf) # $(if $(_DOC_DSK_IN),dist-doc-dsk) dist-doc-docs: $(_DOC_C_DOCS) $(_DOC_LC_DOCS) $(_DOC_POFILES) @for lc in C $(_DOC_REAL_LINGUAS); do \ echo " $(mkinstalldirs) $(distdir)/$$lc"; \ $(mkinstalldirs) "$(distdir)/$$lc"; \ done @list='$(_DOC_C_DOCS) $(_DOC_LC_DOCS) $(_DOC_POFILES)'; \ for doc in $$list; do \ if test -f "$$doc"; then d=; else d="$(srcdir)/"; fi; \ docdir=`echo $$doc | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`; \ if ! test -d "$(distdir)/$$docdir"; then \ echo "$(mkinstalldirs) $(distdir)/$$docdir"; \ $(mkinstalldirs) "$(distdir)/$$docdir"; \ fi; \ echo "$(INSTALL_DATA) $$d$$doc $(distdir)/$$doc"; \ $(INSTALL_DATA) "$$d$$doc" "$(distdir)/$$doc"; \ done dist-doc-figs: $(_DOC_SRC_FIGURES) @list='$(_DOC_C_FIGURES) $(_DOC_LC_FIGURES)'; \ for fig in $$list; do \ if test -f "$$fig"; then d=; else d="$(srcdir)/"; fi; \ if test -f "$$d$$fig"; then \ figdir=`echo $$fig | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`; \ if ! test -d "$(distdir)/$$figdir"; then \ echo "$(mkinstalldirs) $(distdir)/$$figdir"; \ $(mkinstalldirs) "$(distdir)/$$figdir"; \ fi; \ echo "$(INSTALL_DATA) $$d$$fig $(distdir)/$$fig"; \ $(INSTALL_DATA) "$$d$$fig" "$(distdir)/$$fig"; \ fi; \ done; dist-doc-omf: @if test -f "$(_DOC_OMF_IN)"; then d=; else d="$(srcdir)/"; fi; \ echo "$(INSTALL_DATA) $$d$(_DOC_OMF_IN) $(distdir)/$(notdir $(_DOC_OMF_IN))"; \ $(INSTALL_DATA) "$$d$(_DOC_OMF_IN)" "$(distdir)/$(notdir $(_DOC_OMF_IN))" dist-doc-dsk: @if test -f "$(_DOC_DSK_IN)"; then d=; else d="$(srcdir)/"; fi; \ echo "$(INSTALL_DATA) $$d$(_DOC_DSK_IN) $(distdir)/$(notdir $(_DOC_DSK_IN))"; \ $(INSTALL_DATA) "$$d$(_DOC_DSK_IN)" "$(distdir)/$(notdir $(_DOC_DSK_IN))" ################################################################################ .PHONY: check-doc-docs check-doc-omf check: \ $(if $(DOC_MODULE),check-doc-docs) \ $(if $(DOC_ID),check-doc-pages) \ $(if $(_DOC_OMF_IN),check-doc-omf) check-doc-docs: $(_DOC_C_DOCS) $(_DOC_LC_DOCS) @for lc in C $(_DOC_REAL_LINGUAS); do \ if test -f "$$lc"; \ then d=; \ xmlpath="$$lc"; \ else \ d="$(srcdir)/"; \ xmlpath="$$lc:$(srcdir)/$$lc"; \ fi; \ echo "xmllint --noout --noent --path $$xmlpath --xinclude --postvalid $$d$$lc/$(DOC_MODULE).xml"; \ xmllint --noout --noent --path "$$xmlpath" --xinclude --postvalid "$$d$$lc/$(DOC_MODULE).xml"; \ done check-doc-pages: $(_DOC_C_PAGES) $(_DOC_LC_PAGES) for lc in C $(_DOC_REAL_LINGUAS); do \ if test -f "$$lc"; \ then d=; \ xmlpath="$$lc"; \ else \ d="$(srcdir)/"; \ xmlpath="$$lc:$(srcdir)/$$lc"; \ fi; \ for page in $(DOC_PAGES); do \ echo "xmllint --noout --noent --path $$xmlpath --xinclude --relaxng $(_malrng) $$d$$lc/$$page"; \ xmllint --noout --noent --path "$$xmlpath" --xinclude --relaxng "$(_malrng)" "$$d$$lc/$$page"; \ done; \ done check-doc-omf: $(_DOC_OMF_ALL) @list='$(_DOC_OMF_ALL)'; for omf in $$list; do \ echo "xmllint --noout --xinclude --dtdvalid 'http://scrollkeeper.sourceforge.net/dtds/scrollkeeper-omf-1.0/scrollkeeper-omf.dtd' $$omf"; \ xmllint --noout --xinclude --dtdvalid 'http://scrollkeeper.sourceforge.net/dtds/scrollkeeper-omf-1.0/scrollkeeper-omf.dtd' $$omf; \ done ################################################################################ .PHONY: install-doc-docs install-doc-html install-doc-figs install-doc-omf install-doc-dsk install-data-local: \ $(if $(DOC_MODULE)$(DOC_ID),install-doc-docs) \ $(if $(_DOC_HTML_ALL),install-doc-html) \ $(if $(_DOC_C_FIGURES),install-doc-figs) \ $(if $(_DOC_OMF_IN),install-doc-omf) # $(if $(_DOC_DSK_IN),install-doc-dsk) install-doc-docs: @for lc in C $(_DOC_REAL_LINGUAS); do \ echo "$(mkinstalldirs) $(DESTDIR)$(HELP_DIR)/$(_doc_install_dir)/$$lc"; \ $(mkinstalldirs) $(DESTDIR)$(HELP_DIR)/$(_doc_install_dir)/$$lc; \ done @list='$(_DOC_C_DOCS) $(_DOC_LC_DOCS)'; for doc in $$list; do \ if test -f "$$doc"; then d=; else d="$(srcdir)/"; fi; \ docdir="$$lc/"`echo $$doc | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`; \ docdir="$(DESTDIR)$(HELP_DIR)/$(_doc_install_dir)/$$docdir"; \ if ! test -d "$$docdir"; then \ echo "$(mkinstalldirs) $$docdir"; \ $(mkinstalldirs) "$$docdir"; \ fi; \ echo "$(INSTALL_DATA) $$d$$doc $(DESTDIR)$(HELP_DIR)/$(_doc_install_dir)/$$doc"; \ $(INSTALL_DATA) $$d$$doc $(DESTDIR)$(HELP_DIR)/$(_doc_install_dir)/$$doc; \ done install-doc-figs: @list='$(patsubst C/%,%,$(_DOC_C_FIGURES))'; for fig in $$list; do \ for lc in C $(_DOC_REAL_LINGUAS); do \ figsymlink=false; \ if test -f "$$lc/$$fig"; then \ figfile="$$lc/$$fig"; \ elif test -f "$(srcdir)/$$lc/$$fig"; then \ figfile="$(srcdir)/$$lc/$$fig"; \ else \ figsymlink=true; \ fi; \ figdir="$$lc/"`echo $$fig | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`; \ figdir="$(DESTDIR)$(HELP_DIR)/$(_doc_install_dir)/$$figdir"; \ if ! test -d "$$figdir"; then \ echo "$(mkinstalldirs) $$figdir"; \ $(mkinstalldirs) "$$figdir"; \ fi; \ figbase=`echo $$fig | sed -e 's/^.*\///'`; \ if $$figsymlink; then \ echo "cd $$figdir && $(LN_S) -f ../../C/$$fig $$figbase"; \ ( cd "$$figdir" && $(LN_S) -f "../../C/$$fig" "$$figbase" ); \ else \ echo "$(INSTALL_DATA) $$figfile $$figdir$$figbase"; \ $(INSTALL_DATA) "$$figfile" "$$figdir$$figbase"; \ fi; \ done; \ done install-doc-html: echo install-html install-doc-omf: $(mkinstalldirs) $(DESTDIR)$(OMF_DIR)/$(_doc_install_dir) @list='$(_DOC_OMF_ALL)'; for omf in $$list; do \ echo "$(INSTALL_DATA) $$omf $(DESTDIR)$(OMF_DIR)/$(_doc_install_dir)/$$omf"; \ $(INSTALL_DATA) $$omf $(DESTDIR)$(OMF_DIR)/$(_doc_install_dir)/$$omf; \ done @if test "x$(_ENABLE_SK)" = "xtrue"; then \ echo "scrollkeeper-update -p $(DESTDIR)$(_sklocalstatedir) -o $(DESTDIR)$(OMF_DIR)/$(_doc_install_dir)"; \ scrollkeeper-update -p "$(DESTDIR)$(_sklocalstatedir)" -o "$(DESTDIR)$(OMF_DIR)/$(_doc_install_dir)"; \ fi; install-doc-dsk: echo install-dsk ################################################################################ .PHONY: uninstall-doc-docs uninstall-doc-html uninstall-doc-figs uninstall-doc-omf uninstall-doc-dsk uninstall-local: \ $(if $(DOC_MODULE)$(DOC_ID),uninstall-doc-docs) \ $(if $(_DOC_HTML_ALL),uninstall-doc-html) \ $(if $(_DOC_C_FIGURES),uninstall-doc-figs) \ $(if $(_DOC_OMF_IN),uninstall-doc-omf) # $(if $(_DOC_DSK_IN),uninstall-doc-dsk) uninstall-doc-docs: @list='$(_DOC_C_DOCS) $(_DOC_LC_DOCS)'; for doc in $$list; do \ echo " rm -f $(DESTDIR)$(HELP_DIR)/$(_doc_install_dir)/$$doc"; \ rm -f "$(DESTDIR)$(HELP_DIR)/$(_doc_install_dir)/$$doc"; \ done uninstall-doc-figs: @list='$(_DOC_C_FIGURES) $(_DOC_LC_FIGURES)'; for fig in $$list; do \ echo "rm -f $(DESTDIR)$(HELP_DIR)/$(_doc_install_dir)/$$fig"; \ rm -f "$(DESTDIR)$(HELP_DIR)/$(_doc_install_dir)/$$fig"; \ done; uninstall-doc-omf: @list='$(_DOC_OMF_ALL)'; for omf in $$list; do \ if test "x$(_ENABLE_SK)" = "xtrue"; then \ echo "scrollkeeper-uninstall -p $(_sklocalstatedir) $(DESTDIR)$(OMF_DIR)/$(_doc_install_dir)/$$omf"; \ scrollkeeper-uninstall -p "$(_sklocalstatedir)" "$(DESTDIR)$(OMF_DIR)/$(_doc_install_dir)/$$omf"; \ fi; \ echo "rm -f $(DESTDIR)$(OMF_DIR)/$(_doc_install_dir)/$$omf"; \ rm -f "$(DESTDIR)$(OMF_DIR)/$(_doc_install_dir)/$$omf"; \ done dist-hook: doc-dist-hook # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: netspeed_applet-0.16/help/INSTRUCTIONS0000644000175000017500000000155411402426203014353 00000000000000To update the translations to gnome-doc-utils: * first update the docbook DTD in your translation (for example de/netspeed_applet.xml) from 4.1.2 to 4.4 * then check if the old translated xml-file is valid: "xmllint -valid de/netspeed_applet.xml 1>/dev/null" * fix the errors if any (compare C/netspeed_applet.xml for reference) * fix the structure of the .xml file, so that it has the same structure as C/netspeed_applet.xml; you can verify this with "xml2po -r de/netspeed_applet.xml C/netspeed_applet.xml | less" the translations should match... * create the .po file: "xml2po -r de/netspeed_applet.xml C/netspeed_applet.xml > de/de.po" * fix the .po file: it's probably totally messed up; fix the translations most of them should be there, but in the wrong place probably. translate the rest * for more info: http://live.gnome.org/GnomeDocUtilsTranslationMigration netspeed_applet-0.16/help/pt_BR/0000755000175000017500000000000011402462051013546 500000000000000netspeed_applet-0.16/help/pt_BR/figures/0000755000175000017500000000000011402462051015212 500000000000000netspeed_applet-0.16/help/pt_BR/figures/netspeed_applet.png0000644000175000017500000000645411402462051021025 00000000000000PNG  IHDRlssRGBbKGD pHYs   IDATxytTeڒT $$ vP8"8ͪ6 i B͌ pȾ(FQe  TJY, s9TwٹU+~ѓ::g=d G _PChk7UsL݅;n2RȆEO1f@R}y<8M>J-c)D݃aY8oz4p$ ٺYr@|⍎%&6χoQ ZȄLRt Qq ,\f%{t Q#yJ kAU Kb^cxqB̟ϡ})*DaUjUDv 쨭EӴl$g.fޣ|{gmԃ?u0ttFyu-_GVu<>u~wΝˌ32e }z׋- H+;XqDJ@BI, cʀoY1g=8c{r_z_R{̘0L,vFN'kH@ocv˧3ϖ?EÈwǎ'OuuIxx6NϰH-#BADDf?7dUX<5 "(R|UetcZYF(FA Izꫯh"vYOق(L\4rS'_3VpbIM*0<3t2s,}x K:gICzԤr*ђX/cqJxslU'58vf-joOxsT;sKRHb +dȇM] ur%%^:wj=Mds*?>iڹݎ 2/}|%떼 smI _q6>&Y%@+ar8n"H$f̛;%7 $Il6z֭[j#6Kɑ^+`q9 ''';v4KMKMM ຂ,)edY#.sLASU59k|1Q$H֍ 8U }3sĠo @UU</SRXl{NN'QQѭ&6y?>E ctD d=WfXFR>X_Oa-8zg,qqz3vGMK0 O0:|I%O o+av:qDFP=8d1:F%MiȲ7A0XqaSZZ1x{FÕ˜;_HeU%ϤSQ(f4,3o',<6[D".,,v9\u䁏;/Cm_ȱ 7A_ mP 8f6p!B7`Ϯ !.FpmWa (M_KݱJbgOmjI~,#fh l#kGh./W]۽R-6fk 8<瓲gFN"AUt6R*`0[psQc6[O^׫2ATR*6rV#k 'ͱ >t _}\EBzMſpПWӑcĢ%:vJ |Qhuzy $5;iIӋÕ09B\#:Z#щpG'9^XAIpb;.!;ۀ SUO9%.h$=[XWXjy۪h<o`COf$< 5p\C`tWd5PMfaZ2^$uk߼H y0jTz:%:jL0b;&$+fRaQ][/)'Ȫ0 Wy!IlǓSYٜ(,\w@0]bBQ9Ռwkz<`o& bTMtgɖ./n]Ǣp%8:pdm 3Hd_!kjcȚ [ykJ&yًCuf,V EZojbXj8rI"Y-,jHh>z]fP"sߵW`+ub1~[ڡ?w1J^I@卷y=|1@ocl[Zu3HB8o~I7" ͤe4#npH6Czatd1x5ySPL%QB|$_Bm"-'"QS7"ǖF_YA#,SFXO2PI.nPYok3 ed/fB L:R5)&݅ň4M.&I>^ϖ^u_ Pʻ/m"#P㚺y/[pu7O\ l>:HRWo-Z(L|w'ҘkWqj_Zyk74|d0( d29Z=c2SPs X% VZ5m<$vcRgˆK)boϼn*jH?^[d ⵀrJ}j͌>eBn$aZ>S9m#0*Ƀ8 ~DIH5SA%P]e&r0i<EyNy[N y΄`dyfš\ꃪPTCVJ)#ȍY:7Sшd h.ݦgn,AF|^,tdRֽ *s ''jUJIIbolmߖQVPI>bVS%xb 4/2>{1QȿXGE Oҵ21 Ƣ{$? %{ O.ɢNt?VٸPŽe?VO#yvIQ;BA@7Y~e%'k.MoZEV;j>%3#q۾|<,^[*<G@@,cRxHR@1&&(_xnO8βFԽ}W()c~\U-C-=Ƈce7>̦ %gOCG|yy>}oeyAoI=:sX3,xs(5/OW\]\s1+ϛ$P/5i(gO~f\]\0d痐i7O"G:R"~QTЯSd;7̽eFB0.t-''Ѻ`*==̷xyE[QM@+,Ju[5AI VŠǪhbDC̨>憇UE'\]E6 o(-z&U-XRΆ#V")I9GTS:&$ԕ,h!';5{5MUǦ5\`}&ughB[kyDLzN+u aG t29z"/ KyˠUDjb4YDixZotjd2qաNRKt2 j7951먦 xR*Pg{ӴWw Uxѩ jN6HV]aB=(k۳77JarwG{`g Ps䬒Uv3$l,$߻; +:Sk\OȐTxڒLEHo"=O$>^A.7(@$fr2$R%K$6gC!7]Xi]x4.{5MCV8ڗξY} JJ(yoh UruF^ bvGqKw7_y -\kZ `daD 9yx#r'1h }8k7Gӏ`0y5L GNGUKHO}b'Gm]i}$Ŕ?~\3؍P $6Hݬg,z`5I '^ZaUzodJt5nJ)?<na,~4]0S?0&AQGjg;\dך4 p#r EdȔJTI#2nӁ/()Ik--HqJjHc08nW1 uwQkpK]ק'@Wd:[2w(T9:d 9Y\suDFE_7AC\]p'_r2%cHC 5$ ᑾJX6uöߔ8/vf^7cZ MByŭ$+K)U؃&U7HdPĒCr܈;$%@5i 2|YmajF>T-^]Cj}/XօqJzƊ wB({— m埉 qTY}RQPXw4wqӝXwy+ 7P *7a 'qp*4|ᗽvsXI^=0 6~,:}+@jyRr[Dv銏/ǎb!;$11].Ԕ3i[ N!^ۘKVADx)/b <_͹um^ݐK֊݃P(,LJӸ-S;ʫk(0ˈ|aXJٖVۏ^$rVQjd ^UA.\]%P9߮Ϳс.&iq;?{m 9vؾxR} HPU\wU0 > 0Vu՟B+N!a¢i׋<{|VIW$澱oW$[Y~~ݻ: ܓ;Jv0aXOLF#o|||k! ,Ga[K$ipz5cՑ}4"-k$ KЙ%@Rㆧ!>ȭTHXv9nVYG2(6Hya>%u(x9&7e-dAIß`w-مz{5)Os99EW0TTj< 'W,TI1OR@Mפ([̕fRTm]WJyn u6{0b1`k $:еL'Uh?]z sK`M7RQo2[Ƿ߉j暿ooR$d,:df-r OM7g/G~YV˔#X76|O$^k(4U?0rܵT6ZgBo0gDiߗX/3Tǟ=:~m~fV;yG& &HD|+lcћ,v?c={\mBi]0wi5 a]WC3hBbTz:&No`܇v؉7`0ѵ>z| ΕЄDBk%5ݙr-gd`g펮| BSRm<U&xAI,~}JK/vyAfҍ-~HA.K" | B" С' t(" | B" С' t(" | B" С' t(" | Bry>juF&=յ\r Ekoh$C_`E.v.=#1@,ΠU_x>==? n#q$V?NDt'fW݉^ݶۻ0d!.׌'Ruan)ɸ] LY>Qz^L lisۤ/o8#|L{[mĉ/u@$tqȀ"!\^BVMŕlf̍Zro!SkK/` (3up~A[9 L}A: c|xo] bK8{\RZWaK*a4ƅz?{ [Ͷ K޼k$ȬQ%E_JƁ<[<؃̞1>`ml[\mͅy>t5O} wbY6fm2"lky+ڰ\}3BDo)`cQ $(v(7=#5R}3IzF%v/WW6{- gBö$}&+_Ɉ0[rSߑR]Ifbڲ4ZClt>.qՂ}" 3"V V5{ywa\ml%D an% 5q_ڄlV16df)nxf,y# Å^KFeґL–\fyʃ0L3n5es[ dNt2ޝ+煋ToJ3jm&;v#f廻0UVe+9vm\ dA]lZ 2,lVSsc+DE颩lZw&>aܡxֶ3WNg]bs2Dk[+3 BSm3' }'u zv^+tpx^uǗ%Rlؑƍ0Lp?T8&Ɔצ$2[喛h{`RWJ]dr':8NZZ:E=|5^S>VL?ڠo9;65G* fKckّCڏ˜!g_7-5q;Z08Qsm+{Φ^ M]:e;yу[@ ^1.D=i]4 w 6Dԧ76|u{K ֖JO>IrU*`M˥wo0 CV=ͤOX]{q-qy.f+vֽsꏷ@wiL  PY,g{(tBa1-.qrqu`B1~ֿ)KadPTxҹW,Q;QgVKzNAiNMDo"H>v{}6Ν4[tOnRk+8rM`595Tw Fdn{{H9jz w @"O~dr^r86A\uutn5tQs像~}GIM95ٽf{tN?ڟ=ˮϓϨ [[v6Ahz|73>?F^H?880ŭ)}0߯ń _hrwjo,bJnZ(OOe,Ok6oO>蛣$ }~&gڦ3mCX/.\K s1mH/uZMI5sW޴OHesfӊ4w{Um, '(tq[g9z 4vCXX2c}Nk`8#G)K? 0Cޯݧ, St%N- lz/q q$_*&tʸ~@߽G1tR؇@<ȿxi]Y$=3WyV0W0zh:{ZƵ}{f<4V?dG5N`|DT<J$\sm`'YDmKfÖj"sCK"hWN@Mֳh%>]G3{gߵakPIr(})b'IA xIu>ݴ;3`CKٸN:_8Ak$J<(p\=>g?~.vA)¦i R i" | B" С' t(" J: Ih4a4 mA.Th|wD'jj(/#??mU. \r9뇋+t?Jט|ш @ A8+VDa~.G ZoE'FrٳAX~*^6\رT'djb1ِ E[U\vb:IVB! `ݸ/( m0 @>Ah];?FD3ԾiA1" v5+];?F.{|l>ΐ{9.FYj Vk[+&1]ĩtgo[i?=>_g)">h<|ۇ;f&%z^ܨݴ|0f(_NBNSY6$qW%11Bm2* {+5G9QHYI+.>I%c$'+CWﾄ_B~2C_gq5USz y'XWwĠ1rیEug͊j86t6W x⮦Ykj.t(AT2b 3-#9YY=|__?؏%3+x%ey χ)kCIGʗ3.1@CrG1ΐFm%c{IߛڥݨU1sO1rtB˶ʆiL_2>spRzҙKk6޺?aǍN`h@/H@2.o/b/̿7!x; <ڴ $ٟ,Z o5+Yj%dhR*-T~c;ǪOVc$d'=1WHIKqu#*]1# !ssϷ׌̋?@a k~DsW~b1OdK#mâI[O#d&ʚ9aX y<#?zG̺Mɻ'D5ݞEAq%a[4*"'O'~L ;de8 EfQ.^M]y-ۓ̒Kx>c$u鷸7 2Tܿ'O`HW9yPjm1֠7ZALbjS+99}%ш; %'; \Tm>@ЍXw#i(KyNӗΡ!Duʵ :O\CCP&|“<+>9HUoNErX:'MbO)L"&2#Hrv|'Y avP̹^+3?D^JPGR~ra/p8ț "Z1 C#WѮV0s丄`X]4S3h!(eJ<#ZDV̊ ,5TQQQPh\'P^JAh}ILbjS S\PUX 2$sKTR0Ll&nw_C}ń3v7pҪ׉Η—>8NI~e]ݓ!Pc(orR3aF"zGRI>KƨeAM^ vkyɑHG<$pr5M9 !4ὣqQmP뗰zZ]֔TS7k̽ڌ*K9^(5h &$IZaFoQR0X,%GIヒ&ÝyLڴ7yY FHXLͶ!k-oϳI\R%X>gBi4 S tIя%V3-ν J`[v>~-f\-F p$:6ߓmIBBB0- H ,=,&7OlA/ɛBGioHdre8Sm>$μϥ //.4sr!*.6L]oRg#)e|%SNv{=8ݐ $GaW1+_Ɔ73޶ep'Ӏ:dw_ y805?o-iqXGy\2+HhJ%٧TpT5!l`6gz 6ٶԞ>v5_YYݻWm+.Y*8JlY9/1k3ŗؼC?h6^s݂Ui۞˷n'a+|;Iؑkxuzvs*zJO"ÔlBJ~1%eGeܬ5j,&'3{x _ I/.#~SS?͋uɋ?&#;}䅧8չ+2Gy{, ozm#LD0%;r ]e1yV[AU-CWX@U {ɬC[UIU 2**,bTr"ٿw Uܿظx\\igC歏3n/G8ICcD)AQQz!3_ȢRM /ؾG^/ߗ~cI 'ߓSn6͈3(Nc՞)~ z0Wv}_$gakЗ1ዠDU3'}q9> ;w驼~N߸8N3 <"UûY0 D}6uWt: J#>XVM#GSB?KdٱwOU7 jj?w>y@Z}JK//19_{#[.!Uۻ1Sk )xxA)$ &C ՕU SyF!k eZT~(^ITx( !w'Ч%})*" KTAqѩӔs8@޶-1멬8dl lWB+Z WouSbce3m?-5ػ,Xk~h.|MMcd-\&Xݞˣe3AZޏvT  OwOژ:Ah#'N"ӕ‚| P[{'NxxxP|n_& Q>φ'Uj#I?J$A TkK%>!x' 8AQCBDgj T䵣,I=@WvOꂗa~ \VئADIAoo!A.oh3qpIHIw^&O38anR–ogxl8I~Էr!I~ge={6̞= _gm4y^8:.:qsu[VY1rی8$L52†Wr,7zi~2~a6sgnuEG`ӏ?T*mmLuzy煣7_=p9/LDLh ]OY⏙Cx \}&<{#ˈXK<>MD@0!yӛ*sgL_]es/@1frh[>H{IߛcK֭ ?npCթB\t6dfuN`v&xXԟZlpʖ50~}?5gQnsW~b1OdK#Q;XagfUa~z O3N|֭? D%s!Y O.nGTtyyY\DuהxlLkP?ڮHrv|'Y afELd$qCf±+iv97]bW}p,&1'ILeuvӿ3w4=oקtFu:sSn{F쯙z^uGd-}!%|$/|d&s1&w4׶.{Fm03N%zUfA€ybv7JJYPgQ1}BT\;}5 !#ƒ='t" '^dY2L(ὣq[ gŒD>Փ|Q-P;<̇=\|zu2f1o?ٲIȗ*d *w`7Mx$~[hԿ8YN뜶S˳%u26ݵVCkGxz\6"\ $$~[_T'Ss7:>]Anlp4縼-y\$$,SE c3oGs)Ë~˃5.stP"’_oOl!P[oGlm |JO"ÔlBJ~1%eHS?͋uɋ?&#;}䅧8GՓ Y͕3UDms>&$ti웇[*(&Wvޓ|#ꜗ92|2I|22vfurX^;fVG1r7?#: IΏ/,tvmИDטl c.3"% E:Ǽa!x+?{>pCNJ0J:Rr` VPpC  >xr9 L&o>ߋbl 2ٽz5)Z]蜡 +d|0ëxȭ988rdkuk+nÛgp|FF25|q7k>}tͣ|EOkUU2vuzcf'E,z*@.to2_KL^OL+G׻b/}(7Y̕]cp{a[mygV'n:w=ݖ2SfK]4bd:YX@?#-A:h?Ê> ;w,nz&Ny(' @I#l||2W\9eUױx?jwg4|sƌXu b̘1>FEٗI|^)Ʃ[] g/y4wݗ[3MZ!Z?8tduk;i)-)nLrSUY;AxD.7^{Ngr6}̛ǭnaE|+zQޗ_~μGb2ΰѫgz|dlRqr TAhz|III|՗rt]zIIIwIT%=Wo9Ƈu1jف&սNRR߬Xs{ugcBN̕?өnk" pYhSCݓa=J   |$B/y \ ( %IB8o KNApdr9!!]gjuz*/-?@\\D'Ujk#5(giZ)).f۶- > "\jP 8AQͤSXߕw  {'өP(gQDDDn.=I..$$&ңWor1Xr)0h4ajh4wO$I^ ]J B" С' t(" | B" С' t(" | B""Β$FFI$QTh4]<OxF:v$?_<ѥ $4 _?_'&keB>Aph$77?7&3vx"#ċ/_ǞTZBFF:7/o y.p1'N0lݼ&3p] 9sơ+ز/M2% 8AZ)( f IDAT'4,bE8C$ٽ'k6Q*#"())=˘|$d=wEQ ۷[O+ӧOeJReN\pYJRi޽ޝEU* ""(K.ke.׍ rlѫⒹ\2KYjRi " "& ,, ~˙s}s<@}q}ٳEo":K;;H2+j)A5rhtVQ֒v4CPJ9'U$e!IY={_|N9{l2$4S}m8Y?x-bDUY&?~|c:ԶFy}<Nػ5K>올JJFE;9u,v}A339yw4\YKks9#G3zIM^Qfm>kёcI-6+op\~ #lv|QNA)7t !}-HO#ޝeNsv?8 Y^f"b+b*91q__E"ACMC0j`dOk\pE<_RMX$Rw_ݝ5 _攅ģ`>$Q3 /v,Lf+|ӓVM0p*GXwf [1piя?Y֝O-R̻{o%WaXg[άEèKhX:秽~ @Ftvs L^$% 9-fR鑛Q]:߁4KK,k(*( J|PL>s|ʧ#w!$Wo>C}`OCOo^2 E+ ^ɴ/ְr9o[')OghޕjO>Rty}6,&82ͩawE:RsY]浩_],4牔5!9wm'\]DݙJ=0eX@oL sAOd7G%* q} Q*?n7xACNwPԦiZ$\I|ToaiڵgS_% %/+~G/&  u,I?@둏;/!Wx9oA] 2y#!.QhȐdEȔ/Nnܘ6(t׹h=.ex*0yei2x,)צru!-Eճ ͤdfd2UϾjfh7D7=eZ6gʞ;bCY؏/gmW[##2Z/n6(d]Bb*$ JލuF7wlMns:/sL-^cc*JBF*rG%iRHFgr[iш{/OV5eTg&\")8y:-\q*͠}XY L {YK]l)~ԔUħgY8{#԰Xr˦g[f^OM'np>,JoSIH8w1- Jz/H>&>|;Os#2s.3}|~*mѠJԪS '[KjYjN]LәMSNMzvwaJA1k_FFF o(ͱ9|8Qa\6W]ycl+*`CO0{_$&&{ig=-*}S8 bځF=4>6N&i+̂gwrJ⾃p`M^M\q[е56"6}æӣ's*6>i5cvtze kҰ"^'O]s$c#=jS sכVH$d5=t/'hA09]=\ V+WUYYYqX0] .BU#:*s:9ӯ 1cDT(Ա{4hD"DxN'Y3Zn\.&K:ʠoFI9' H$jb *%&N[A" `RDALH| IOA0)" &E$>A' A" `RDALH| IO*,Yd>X%>ZMJr2ɏJIN&3SxH ¯;G?aS꥽߬*TtHpy]VPٻ >IOK+~!)]28x8OlYGIf8YU|4ݎ ;1 #:eծ|gBU$I?~Y PT:U8{}/9 j''|9D‘eb^+ ͍MK <̉[3Y!T9rjzVk@rޤ[lRf>WEβfBO찱uݐd(Cz7s{w|C&?G{ Wgv{x5=ݖpq]}ڻfQ\L)n04,1nvtTmph;gtaow͎yi_5b.Nzf }C;llh-VO@[k;|gTJ:ț]7IO 6ERyV1xvظfʎ[[2#;`]_&| 8֫0X϶3##^+nQQuK2UYN!Xޙ1ư0_r5 JKI;\?!! 0NJޛ19sNKxUpmv,&ƃhsySԹ-`S݉(NY%ǡ9_YKks9#G3zIM^d_Kgs>Y}*5a;Ī,~֖2p?]shH:]yë62=1T_F}7軷8fun10Yv4gw\?9Mk|݆߸ɉ94bXW <:DZ.-I|Ȭh?/Y{6rq&w}Uw*8ۛyw9`ư  So`ThDwv8ӛWGLC=5bO}Tr%ժפոW''ܽF8ϗ?v^:f+}u-w_ݝ5 _攅ģ`>$Q3, 97g dDgw:%LrhמM}^ǷC_ƙGg^ɴ/ְr\4 Iʄr/9}uж.A{W=\YӁi۸ƓuX9X!KMq1}Nvsdq\@Y Q:gT3Y+Z`a=uZizcGHɧX7k}qh\dD'JdUk]׾@9 OF :o+:̲9S\&xqL/Tud(I(+~G/nve(R Q8rJW2 G)/$s~=.'>.'O~P/كF:>M}ռ˦%WҀω0-ƶGDI-bF5=~G86z^yeZs A<6nusǶ8I7^FINY:ɤy߰t4@B;dDRFk,KWH48 YWh|~-bٽmgaZFV=W:ǿk<&!uDenrkUs2fT]kU UW3hp;d9?LTfhޢ#-xitNwΩb60_"|j5 |8:Fq:1kh&XoZ_:mGW)& kS`GVgp]oﶧc?y^U4(zWW;Vt&/]}>4ԫ]86z]%bju,$?zĺ@TtΙɿQRSPAFEnTL&˻ sJ/:~x~ڕY|\SDjtϲ%=}zr IxϨMt*]S(.Q* ?|EA0e" &E$>A' A" `RDALH| IOA0)" &E$>A' A" `RDALH| IOA0).ijRI~ȠWJr2euvvuvf$pk 2c{]Ӑ_#w>.YGYZKa` A)x/3|hx<.P(ޤ:r_}2Fb(k9Ӫ0f.F7򌾜ɫg(Yedko6&(fe-,SI䏟e ytrTy:աetUzą"o܃NuRtSZVoPYXju.y0ߨ yӷ<ӱ. ~֣s|= ζv4ew|t5zfgfoH/[~t,o o oԌ'K"!mΣvdW4\{[;l&rq*?w3llwk7kP'|]o$px'\_wK%H`׌ohŊ dui]^=O|s1E뇄c,mq͔PFJ`'^Z!?\l?:d [k|o= yJ+~GGiڡvQQAML|IaH="%pe.v˯aL,ư0_r5 JKIa%\9z/x߯̕!p@\Z͢m_]}VsmƶYzފޛ19sNKt/ \섹-!t6TƵHṈgg)cH$Wx ~ܙ V g&cB#oߢ:wc}~ ,;p;Q|]}kuQuLD\,ћ{p_Rhq8vq?9$ɲY/1ˉJ% Osd6Y` i^ݩ2-VpZw>Im8s|#,̻{3-_Șn՟,|ΧۑIHuњxIb23>v/JVb-/\;i95 k<ڇwHP4O;\iͫ#_GQAx3C ftg dDgw:%Lr{'6w=UhCR}&BY@˦ѐ}F|w&9^`ŢOȐ+7 R WX/7%\<'w]ڹ==\s#Ԃ=]Dz,3ee|Lr(/xO%(рSyF-!)ڳ}b NY>&^>+9|bcPj+Ȕ f%_cWJmq,Gc;.: cT󒦮A_;ʡA(=I|ibS~ܱ-N },#$'if9)f/mcLv7֔=B&s| nB"#G!I*tTg$}5vC (5@eEWh<3Np)5fcBIܥ+$>jؚtTSsDj IDATL/DJOXWs|]F-v*AO|ڻys{,ܴc!cDfUᵶzqW4l)N}, X&c&;7肗u~2O6 "*.1E©Cދ#>1)0{_$&&{ig,]W"9 `M<͍He8sHmgƒ˹fJwg}V$p~3o ,iPl|75\vٮ T>k#F1i#|gpgwrJ˜.&Z% úMo@C xND_ަS. ]ƿncj&G6}æӣ'sFkFyގ-:ڒ{ \L좱JϢ}l`;i}ض^¦4%G0_"|j5 |8:9? ^ VЫ+`V+a7*1 ^xNoU&bju,$?zĺ@T^tΙɿQRSP0I'Pn>Ρ3FAxݍdڵ[d2^];gT*xywj>gckاP")\>j_IOJ,Yӧ/o Z]5B$*[cօ!W[|٩tOPNzzɦ(q"1k# A" `RDALH| IOA0)" &E$>A' A" `RDALH| IOA0)" &E$>AW%dtv#KÃg BVF&%9G z$'Ylɷ=ZqFqko [峎F 񳎤tzee,q< %5(n߹OV:5o"F5 /'8e ۛ4=Kk5ZOlLP@#̌DyʈdyNƬn+ߙWǭP5zpi,oŴ|/ fȲcǻr՟iUUK|$qQf.@*>5=|]v1bpgϠO_f4{=uDoJshmQȕF2Ỷ[33u#C.xzU"/Y5_×]A4?8Jkޝ;w8p 9gΞE5z?. ug@z> %,̟3;`okD1 qXq<-:K;;=klC[{- wzbb C?b>vFFq84#J:˚ =q։vCf7JS`{]o$px'\kmSWp#^6 UP]Uu/j=,eۢ,G[;ڎd$]X]ۤy/y+|Ԛt9fzƜIktV2$))#F36pM ?nvqֺoj$7c^3s<"&.+H$Wx ~ܙ V g&c6w;nb^n<&=7oNN;˱]_ F>|\Nϸ08}$|%$m ; >(^ào텮݆߸ɉ94b ː:棍ᧀβ9Yٱ-,4ګ^߭n]Tf͕K 비ʼ6g3r4ݜ[e/:Oƫ ɼ=_8¹ Lى akw`BoGpjq`eSel_eqk2 2dQE Sg/:ujCr򱞲OTL xW$I[7oH?,I$H}GR+W7RFFwQ$'++Rl\}Җ?9+}\ry\cNKKsNe?.VzBh"M;|7{ǤR!RlQ&H5_!KĶ;ҁX)ސu R0)в~)זt#Sf:ҨnnoޭҫuocqSJ~FgTki/ƗʣZ_z,C7)La)t:9yә{Exտ؋>bLѾzۥ9ݿ(`.O'6eWzfTz[O1:I>sUҙ}_O=ĀwJ{ŷi&|}}رclٲ=zUVꅍLȁjmuC|OO >ͭr?3H'$._Oz2bN=3WE l-IH2%wǣF{՚\fD姻^m/~,Ͼ1A{W=\YӁi۸ƓuX9X!KMq1xտ0p4?g|o"F1é}QԦiZ$\I|ؔz36ek-e'5OeUYM|QQQ 2;w0{lT*7dN} 1{V7{6#7` IўU[u: Q 3E Ɋыg%Al,w~JmE)Tm䅷&!u,Ȕx>Dn<_FgX{ZoY>r+m\&(兖JE5͙2[>c}9%|}b[v+=c,u܏**Ucܽ{///BBB>|8F#%?xi>Oq#4s1G.8y:-\q2 6eWt,M_uc*KT_Uy/DŽ .#o h޼Y(^_nrSZT_Iԡ`BaӇo2winDF~~Ʒ׊IY9βpGaۙr.h9&tE"nq1hD#4l)N}, X&cߦeWGcƳ>p+aiRz8?]GDi^]w}+,"ƫ_Z?|5NKh=eXxՕ7ƶJOlxJ,K]k)[81 BT*ԉߗ_~IΝiذd^⅚>0o+ُ(`M6-=q8SYM7/۶+S^oF /~hؓNhۓ:Zkem_^hӁ>ǥ42=V` ݿ3_OTZrQnd ^ VЫ+`VA' A" `RDALH| IOA0)" &E$>A' A" `RDALH| B9"F:*]Өդ$'Ad23+y+?/2##^+nc,RkǕ} ZUw=LfU e i4.^8Opa* :{wǷ7ii%.WZδ:KͦK^>C*)6_xyx0A0{=kۧQ\?UX61f+FF$['#u6fu]TK|$qQf.@RÇٵk#'p _rS_fѐ7_n]A'G)9|*iYT,407 C^*}*(|0sb~q9iޝ;w8p 9gΞE,+a~Qo;y4cL]8<1 qXq<-:K;;mꀣmGC.t<?:^3ôpsvg?>&޳f64۲04(4qYIgY3'nvv:nlFi eFw&LNvs_pufmqȱTöQ!\\@1'`=S$넡ig#^J~.L(^ào2CnCo\{vOoYmEǘ9%JTm@sySԹ-`SA)NRLSSwgفӜr,;@y{?:gp:$sA)q+ej1éHY ֟q[apI~_&-KHe]b" ߍmcƉAǧ*f\> OWԉ7͛ǭ[>}:Aelz`@ҖS3eW[8F|Ȉ4tnAKxAk㫷³3AԜxtG$>Jt;:(0DZϧ|:}{P9`S}꣒+Q`qfL\wf [1piя?Y֝O-v,Lf+|5?CժפոW''ܽF8ϗ?vQp3dET*n d9 ksיhu)>i!Aш>pq7|%d=hH0kЗQ1q-JFzȉM us-[{{jWiZB+P>cş,Yض)V:Sa1sSiU^*m۴iDFFp1lB=x(19s krkWRI}ws̾|tmxrUb`,5ǹ=fSF련MӖHtE38ccAqf\\Dʚ*7iwm'=b0}Y$6 Fg.pܫFi`ݢx}ZӞxU<kOզx?Imj9A)8Էvt?}nlkPJxGx*]OM|QQQ 2;w0{lT*/UY g$XG~gV,:J2=.'>.'di!Wk* Hh3 "ߎiH&">\HH%\Kuϊыg%Al,w~JmEnb .6YR^ SRf%E͙2[>c}9Um,%_I!49"_kGiU8,;R2~/>%ٗk+ƜT}hJX`wˋs W oWh|9_^gr%r ͸ӉnBbSEőܱ-N 侗sq4w.`$E\mdDRFk,KWH4jԩRs/3wrTckpZPGfm(k3Ia?k!9%'QgbC~-bٽm^0.«1,p8r(^OM'np>,JoSME ©Cދ#>1bʺq=2H Ό%0oH.\GJH{(5[ Kq:"JX>f૑Dpz^B3w1b );/T9~~:35jad*`svL`DDb66F*8ԷvFqcV&G~曍A;՗=.Tĸ2jOOxK_a~~~ڵ V+|={wX:739,Ǧ ֗I}Fi9q2~O1hmmLmU^GaϠ;h*w& ƵSiiAqdM1FLH2Ao]u\!ZW:ݍdڵ]d2^];gT*xyw2bK A]kMz*]ⳬfIO^ܷa+Hjus#" LZ1'gOA3YA& `RDALH| IOA0)" &E$>A' A" `RDALH| IOA0)" &E$>A' A" `RDALH| IQf,L$12 T] B͔&M#%&J) q}nT/h ˱i' 5IDATY$S !<|ʡSIHL!K\@M.aSۊ.횒6ΖHFQ/K%Ξ=CϞ=qviT+jqCBaCgw^:I)ߎŬԚL~?z_z܌5cQ-ry|zť  M=P(8vòZg ,E-+ mCΞ:*Ke177#e{EHHLaFE)SC&%C))tkCy.|Yj5vVV,'fffhYHRֳE$K07W"앝Yzr٘ |ߣN+v.d, +uAI2* M'4hrmnJZ5nϥ?xl;cINIuQ-SpnNTnGϝ w7d>dqZEwx ;5GtK KRy?*$oMVԬۅ&k ~!qj3CAғlTx⋽ ; ?6u#x1 mDVVZm*Nθ5{rn\݇`rcMQ Oˈ̗W}/ 3f<5jXlzz߭WWρw'L֮~N'ˤ'ӆԏ#^!P4=zDF\n$;wF7~/nqQ1HXծ-^Ccz_ZvOr/%1ԳW^Fj,\0ǡ|`,Uʫ8w5+xeQxESfiTou;8 H;|K9p>}P((JJ% .\ .hpljPUw*fKZ*ٗQeu<Ֆ5ŏ IFލs#nݺ=.eRRYp 4۷#h˕ ^8j\|ŽcYe s){U7p{d i$3 )^ZXAU]|HYVWQե(+UAחU!I1mӦ{?&6Es>ssι<9{J̦/۾]6| {KKq$'WHFf:?v t8;gdGk9^NI8y3aLe 7+dff<<A7f| Y79RHJN x{<'HOrH.`ͼ> &D8T*W&ͤ:ӵ}o u(.Fײ%رz1a$&Djl۴۵C:xuVZ&|bIHyy'ɫGgڞs:v>/30Y?$Y✡̑1 pǎSv#5}gZO'n2x| rNfT &WSЋV XyP>>e29#Ϫ|*^#YY\lY[nW%B#PlOWPHÁf:vHmiҜbl6y<6ILfeL-gac[˾Y2#|Muşp0zv>UC4Y y{SXEC#uEflYwOm_.aӿdE9 PXXHh~Tjh5rM7it)eI(^aűcO:̛[IG3q8ٟۗ[cB_[Kܷ~>c7Z0g&>úfNA3qՏ +&S ͟ 59%%'PRZBlXrrN_] ̗Uón(#i^6܏LLj.wu  e+<P̨2CVc7G^'܊D z'"R3f3x-#lV:O |/"t{)Xп2}`"a?w_dGUUm#dYFeN5%hʩXt:,if[5Y5)7ِKƃ_Аyȕ38aKt ;DÝ1  bAx ѐI&3g߇z /I2|>];$QL*] ۍԡ[L@Sx4 P޳uyU *hxz*S@'k(>/u<0yJǎѪ׷i?eA.@i`uI'(*ST|~?u_}ʚE]T*;v䇫k}>T];j)hh(>>FԼ^MB@j*߃3M|>1&[]|˒vu|On4 Պ],KHuS N[w2GV;% dYjOunOUnYm۶֧ML"ik|Drd& 5e(u|e'pƤn$k9uןǝlW?'w+]AijBGÔ+AnxYu(E <5fͨb`X$%%橩,Z8 8!7-9[J_!-c|uZsC fx8„ 72& %S|~J wNqq $AA!ʖhɱiӨ**>/UQ1>Kz('ЊKv9yK6/?iii«W֕3põz}%jTԚL>xz!4 M%ƔKYԻQQk3Y2N~=4˙&Rs=f9RhDFJTN55h.X8eXMp哛b,#!ގ-.ͥu}(`U%kzyn&o ۇa /)nX/wv߹Ŧ"`B|F<@۩:U,)~w9H/ e( Eqc__׋|ѯ/OYX|/:l…9KJ^׌gؚCdzSw{|O/gy7&H:o{>L#'0LqCDR.Sx('Ep]HLjE}_ubt?<| \V &jkXbbm8˝XM8}:ӹ8b,wbۈbKsp\97Q83x0g ]~üAr r4ch/+&H uA>.a/λǺѮm[hBg褩'j,YVz^?XɄI Jwp䞃у(C仚Z?ʩ]~ү[d%KQ)& Nb{aDw?ŒlLe [oΐC/E+lwW}łicw~J$22Bʝ?~ ,KYx*++hAAw̌3=#=|yb@(t{. F=z^$n‹xaGۼjED=ԁ}ra:<ܵ*)<9 utv SQQT݂  im@]]]͉cQLJ#g;hweoW$6K -]{vS,d6c6]ސpW,ϕ%:.'p-[6ӯ5EE99(MQ=nn.th[!ƢƲu6e+t|_qGD>c˝?1)•x>uvv'!!# ^G4$$dImCFf<޺tGmM-$03O_~_'E&)C;@]_Pn(mK( B\#(7o ѝ)?ͽsY71Œ 3k/ۇI :hL&Vk,V+&h ľ}0NQ/SaX1-|tB{|!t1%#ɽVRXAYjO7bGǑuCg~@I۟\EK֎]9-h6{@? W-MY~.IAm3"4&2qĤVE!B|,j3PT7FɒG2_EB߁''IDEE%.@8JA~M2AI@t9׾#yDGYх؄tN:mfzCl Y=6vQZR隑xv?(qCώ|.^?tNh|Cl99ܛ!!>Y'ЌNطwZt:QQwJ'iSM?Q^ߢVv#n{qa6i,IDY}P/"#̴ m2ܒ$7hٲ% vG8,vXu2dm`OF+E%i49 թ0CZ  m4t5ӉeAQOAhTDAAFE>AQOAhTDAAF~e~׼AAEHS'OAKeIENDB`netspeed_applet-0.16/help/pt_BR/figures/details.png0000644000175000017500000011026011402462051017265 00000000000000PNG  IHDRT1sBIT|dtEXtCREATORgnome-panel-screenshot7w IDATxw|TUϔ( !$@A b]wŲ[wuU]뮽;6EѫB3SH I!0I&$3C&z{}n9>3wL1}Y]q5I}1G.*6$p"=_rPBu5_3Ecw8[4b&!& 0j*+N$`@RXRNѾ2.E> !&== 8TYB`NUVqa!A`ଓܙ`@ DHnQ""""G\Ѿ{&r.}R5|7 >:g59i7.uWt/'.& ;mf+(N;XLX3+\o̖rp5U1C1{5ctke^G1[oqW~m_H3.*eO37,G6${ w*]Y߾x )Udb8`vpRMe>7UBVUڢEy-ec;ˆMDZjA98~-p 8K ]I qtInM8 _S:|9|XZ^ARb4v%$wnx,~i֬YϿH؄Z,-)!6&Liy2EZ5&+1 x%#Œᬤ`V~]BkR蝞Hee營";7Ml*,瀭GF|dzH 7ϖs`7֋)XM40"J*o #&}3igT{rK 80sq0{rز2`b;3+A삦'^G#*C07>F)e[n*pX蜖AC TMl^"kκn_":*,]¯NL1=9vPBV,^Chm6n1KqʩQQ\ 2*-RD00hſ_\ɬgpsэZ[~UvNàÉᠢbN Ái Lc9~)h=&t!2 W__^ZG!O]H4CE).[s7Rat۹\_]X{#π8DTtuZ^}b'wBbJ?&G,͝ [baݾ,>xb_2m^{O=TũM/Ω洕i.zuSn[9WoYlE;oqu)q[OwۙKICt'%yvՎ_3/ahBW@߾vq-I!tG~󷱣ͫ[x>c/+oKLƫ$fنsHkkƳ O|~]՝22a łdHx,=&Jd24 lUp=@*k2=6>£àKEa暽 >o7 ~/#<5ǎ^Gq|4F; l8m)3#bVoIߴh;9ܸ(H r]HF6Xm4"M Nvm{&0O4ιET9c 2.E)RV9/dl_N&dDž</尷j5|~cU d j'rj6b纭j1co.lF_{3T^"p\CFqJ&R7<9U/1L po Q$%DcNSLtʂsXTA8 ½eΘnoDN8uPfbr OmcMӷ[-3)rWpQeveǫQAxt(QAVRƌcIНop:ѕ΃Yʯ{bzrF 3fqߢDQcU;#{qwpGxh?g؛K3OQ]~AUtdIJ}%.㖗؏;k1L{fXDZ9^Y8 #̰2ux¶ofAY'F$qbO/(_V Dfpi.vDucu{6:auw]2,ꡚ0vd O|΄#f59altFXh(va@lظ ,NBP,d@Te*IÍQ}*?\LwM$ ν<έ5_8Y ϭٍlBc]H2י&$g0jV4ovFة|⬽:mnٺ6t ]$PY_:\Ndٯzzb.l6as5螒Ȋ5[ݴ)VN>[@H3`zRmZK-~uOSLm[wD3c'9XDHľkj2pzdu%JńQݷeZ *#{!1DvMs35'1M0 v6W(sx6>t:qp=2̀*U8|1c/bh_6bG7LT,e|Wn"`F8)|wpTa zWCcۼIN$lbooғ.lY5dK64-[ao΋̟N`pF%'-aT6ul4p̺0 *gRHIw)ћK`<3L [~VV+;(&v jr2SSJL %9my٤vN^n.?q9/ ׀%TCy顡;W[4:Ȼ=kV<̜BRRTOa;zóhb:'o ̭bIOؾG.nzs\\o_x7p#P2k\BqG(bl1 ӕ](gnpwBL !two§id`z([[ɒJץޙޟÓ?d[9ćj+gÊ_MwO!L wP[΄4.5U叼 i$6{r'MvrK 0 !!~(#!ĄAp qWǬX18CJ˸1KX1[mT9Vz*a0xnxsnxs5Lmk~/wwS-p';[U+[Ill,1Kbb"y|T$`Y"Ψd lp}ӌ58x:u'H]]rAÉkXB`=g;esPp"YYpu~*  t(%ow5 h[|&gҷS&rn~=+^mURu{֐H⻤Lq׶[wԆa %s];)qBxJ$WB;+)޹ET8 0@JJRעlY;7s-'z͋a!k*iIa7ز1G4p0Շb>vq 3:Դxukc/M]їޱVNI@eWsEٴ܈ o?ciQRvٝ, Ֆ]uqXYLx ÄQ^Qɾ`ϻ9ZHlXy. m뻐I?%"_~ĸg@S**md/O?w8?l-o{DN)o=:ѲDD|]c4ޮHQas0u 1M䢸m xyTnۖFzFeD&'t?MUDO"z6:>l.h&"GiyL8\ ZPƄSΥNyϧJD$5]Km*;PI|L}Q毴);PJDDDC(,.y5 fE0c>_HGUPC٣QTXn""""Ҙx|xH PxI PxI PxI PxI PxI Pxꫂ̞嫢DDDD'r|Pnqi43|xzn}:O,ߌ%3RH?\b+-?$'yO{ULjLL7L%diֽ=+PYo.^pQ̪r3zה$DKQZF0.Q߂׃fM}[V{DDD&=OΠTpGӹsgY,-_￘^݆sC5`0#OgoN&`1"TfƆJ*W~;sr DzEjTkBeJJb_YKYG޺j)mWw ^B#n.ɖ58؛}Z*=_7.%̓\5x+rGϸK30?܏X{(teS"/I~Ƶ/sR|ꄈ4Ϳ 50+NF&Ã-(60|e4nnp٣:A?r.)ͼYN|Bzq)̛-@^̞?o1C.anrTx""""_*g/|<ߟ}Fpԗ)}7ffb\_D jo>׼ʣ 'k$ny_ }'kji,xIc㳧֘dG~5<%W*J;ޒe G︄ 9>A;Xӷ?("""m6gckjbuI~ {cͻf84^zm1dW|ҽ,@7p7'O>gn$ݹt&ǽĢ55.cˏ/sŷ~+/nf5gEg?gL'yƕ:%T""" O~Fd|v+j&{tz?AF!5A7s#}-7zBy<:0's%O;ߪ~ˏyDDD#{Bը^o3>GN`J?""r&{/={v+D"R[&T˹V -|ӭ.y_IMDDDP7rMJD4%T""ptkO=RDD)iC%""II%*/)*/)*/)*/)*/)*/)*ir&v)6+={vk (*/)*/)*/)*/YY詉,^DDڣ<>4wz?kB5j?(N/n*/)*/)*/)5 -W5(6%ɗ)*/)*/)*/)*/)*/)*/)*/)*/)v#'kRk *iҳgv)*/)*/)*/)*/)*/)*/)* 9YHϞʑ4*/넪jGDDDğ U IDAT,|D;Ӈ5kR5eG"iZ|v~/5?zg0ݛ TYZ|v~ih5:JtODDD]9PxI :LBU3۱T%"""uuj)%U"""J PxI U 鶟P 7+"""ҐP1("""*/)zDDD&TI܍X* ]i .j,R%it+ =]DDDZPzP4zDDDDJDDDKm:r m:qO"""ҚEB%"""ҚPxI PxI PHcpSB%""CJ j*DDD:P)_ U]JDDDJ\޽*/)*/)*/)*/)՟跲ߙ>̻Lw)GDDZWmdi%~MO-_YҳgԖ?jAi_jNuODDDKJDDDDK5?5#ijO@eJDDEi6RϒH^.i-6KPDDDZJ PAU-"X`ONcSN$ݪ  PBdMRoHPHrM녪NU""K=T"dʓEDPB%@LHPB%L-JDDDD ,OI%""Ҿ)!FtL'ٳ+%R7^ Hi=Tvh=Ӭ`OmJ - ̊6C+ %~Rðc L~ZSl`./nVL1 ZB W77ox0Gɓw~n%LHZY_qЭ,.s78)5,_>+=.T.8}+hfT#rX^Z_Sm!j=$=J$Q cLx_]̺_扫`I2:%[^Wˇq LҡD˜K+ Y3I0.Q3`#57] 3ruUcQvimhrC+_oo7}nM0>pn =Zxi/ 5ڎxa+mK>e JdQLy>{3`w@ĠS16T2E=sqXS9_<%7OCZ%'!܍Krr<Ǖ^\7n"ޚ?'~VlCIU{Rhׄ^B#nA.K#-eM֤Z/=8_}k~cm8.."^-f??Kxy$θBU& 39iȢf]N-B_hoq&w?smn.qRw?4qho6GKv=ݗm"M]ںd_uh,@ڎo ;ӇA(bBJ"7eh&^S)'k)sr_fQ7wd]ʺsk&O-u>&ֆb49*1-^r8$j&־1-ݗ5elZKh.DnscH$͙_ߊm16$i~ImpvJF}7s}nv~T+ dɌs?"４Yʭ”<q}!Yey+sG&/;vmS^&`5ZvJ5w7T:@P=W{zX[kn_q˔W(7DwɔaHl~G$H7_lzё@U.;n%{9~m?Tktze-֎Cąot^nMj[{%0k\s1 ?'s״%y蝔DBb*C۪˨SR=%V̏` x_0}\®| 7>1݆NR=lО6?gUwNJ_Ǿ%T`۹taHHqxnN>(WMSŻ ^]Y~hӧrdBV#jg/ g!i :_H(=]f/18wPw8{LJ[cfД1y`2RScCECKHn:gcrjd8v~cUr /s멃IOMgdL͎5}/=%26ozS2mn>uL/2q5+l8ѼmzAXwTRdCIڅ}Gs֥Sټc_uIocڱ0TUV~yص+3gmBA^o%e~r'g<c]l<xUв-'sy泰UNqQ-OٝsO`X07sUُs _r6%AuON>6;^HH[CUe%?k|UU{BCØ[~'vFޘ:gy&1qّz(mߖǫG&Mj+qz`ߊ|^8wy햧6x*[zԏ\޲D!د E?[~mA[{Jભ ռJ AMtZ00t,O p6@&׋JCq?&b>7kn@Hi꧕]p08 H{vDz ?qrhꡈ?a sd;׋8Eڅ-7ᤓ[!)=TշDA""* &;MK"-ٟg/d`fwmAٝڐ˜%s$DE겘- 81b(:a#ρ4(Òŋ2t(ZD$P,ce_E4as3&HNFNrM!X3]&3`@VXξmX @bBa"v,dv egOaj3M& 9}䌴o& kp`;0PMfAHoLBr-gn퀏i%,$"""%%T""""^RB%"""%%T""""^RB%"""%%T""""^RB%"""%%T""""^RB%"""%%T""""^RB%"&9)Y&O4֎ED;*=2n~YkG2m=~ X=3mLO 626w QČӓHH:|(bHl.=޾ƥ0-%~:Nދ$:aO.dwO"!+N ds)DBX˩%ܞăAw팣HIL"!1g<̲V=si7}v;i|ǕI$$u=ozқOܜs:e҇gRE7wq/yy[4]m_טzONġ̄zApRUiv*73_4,ݿp,.z<^;Y̼*|A=~M}^wU&R\ݓ~ly_^۳x*L>^~6lXBT;: Qlv2DbMwp E&gy?˘19K+GbM3G?Ǐ ؞ <^j#OJG䡋G5^\j.&E x꒣INL"!s"7J+rqy ^{%,,pS_3- cfw!{T޵$n|'vY=II$$2KoJo?^v b}钘DBXPނmL~jFh-cywyg¨{֍<ԉgszP2\p;~ IDAT/7y=_4G﹎ T㶾gSGX~S|_8{pϹCf;1s̟_pôt2jedz='˨*ܗORc~]?1WƦrݶyGiN>}0Ӯ?Yd[u{Dy~md=;.AKuRof-s//~e:!;X`>Vwc_ l,eGa6j*s/s8~ŭcŲ<F!O]t-p*+zL6yE|wiLy.|aKW,fb`ŧם݋,e)}/xUz }K_^vSY m6'AF#}6r^GB~*m!$1- >5)#8[)+lϛv۳Iɏd?ODjns30nSHpO^{VquzTp㟲dr;˥, u!Yj+RhkjuڊK&q6Q㋭dFpSyϑl3s@zb 8gW`5Ow5T~}!=]ߋţxT2: k8kfLqٌpH$i5}<%}tInqsG>['8Jx#w9z 4uS;gc_d wX_z*ˬ-DD1Է8w,`gW廾O$4@'ȣMƠZR"}zEȠ4|z2bw_I{XgW,c:CX5̚=7ѕm˧l1uGpNf a췵b`sY"rVѱ 芡MۑC?pk2Eo;&Im)q=8s|{):0*GOqgm9s,9SN g?6DyFpPg.EKƅ3@doOUY:Ѯ!>}+"+۳:Q™-(źm\8tTt$^y/'][ab=^vy;ԛ}}ɖyHE)~Kw|{y?ē5k8O{џO/~F?x:U]&*:/_G*3}te|d8~ESd|\(-i5VNʹ- v5= =o&QLnWXqi:+GQ5_/R47}ѼH(Ӄ?}z#~V0ǎ'9 ]i61>hK0Foê$%6?`~@O+rL=]5N~GX匆/u{ٟc0Z0xBFgby\SUX476Kޞ#s? cCnO<Ёc=z.^O#Pdwv59z/9x.1ث/eS|& -37Sob' QWl1JFNOzAKޞ8W4C[t91QEWHî{Vf7ן_!|rJVa{ [?B!xɄ H ]NG*4_u+ՃB!D.^Q^=/B!xI B!D!ɄJ!dB%BQH2B!($P !BLB! I&TB!$*!BB B!D!ɄJ!dB%BQH2B!(an :{l^L}Be/{_̯Ho#H{}y݄Jö6XYg5X|"k5a[{[ >SB>OѾl4ۋ:.6XY;P6]Mz&}߮ VM_XO~5pڕjobn#nH%g]ۋfn9Sa:y-eE?1z`emCu={5h8=t Z_>7VlշC0\ʤMSG/~kŠhS`P[{J|ТV{{yFď>ɆJqO']M)wp25gO:Qc>LxEfkQ=ޞYy= |\6YJadMyKiY_ W+ /k8tռUQ] sN}̵jb/dɼONlA)EƦQLVwfI{Rij1y ȟsfC_rKNfz3rQ]q7-^vE>jTQZ5=~UGKfejzx8`S%mSsצ V)OWƶ~uPI/a6qdmOPU%nqKOw&~EMz.:Pf)\v0oJڷgj<|tɔ~Iɵ:bZu<'kkw{VnX3~^H)߅ug>]5"ױXlpǬ/ѣY' 8OٲSmZZ}xϷ&9TYǕ#fYGoQօGq64Sz>=7C\q֓1*BU2]K?GtRb|?卲gFMĵ{|1w_eYE7k<|mٻ#݀/ΫUm0#&Bqqͳ<}po4ӓeLeGIWb?o2g3{=Yoe`A9]Q?9_gANgqO :}f6e<~qb0#Cg/7c6ݛ P^e1=~np1\ҏ:tlԙ G+9o~oy4rBZY9[9~$G}I'sq.9̂Вb[;\Tvl,f`f9PǟP9%_N=П#qPqSiΜaze#v=//A]tq+]=5/3u{nӰ\j1?2goz>F) ܹ 449> * ]p,@LZwӆ6*Lx#ץ$n`Y)O[uW\oN7l ͝]bo~}O\\1V##P|b4Q&foNn[ wgw}zзeY7v=t[4>+F[-O5|{:KQ_t)˧x6-Ik; `OXG_ l.*{ϔ밆$:Tn9LGZ(}}EԭS&1-mMU)KC\dz5.!q:.ݛ: {ta޹RK {zP[/idȡ.;k}|Wѭu ]5a,_e1W^h%nm|Jj Af 5lu]ʐq~ɭ|-g0xWNQ_tt}JMyë>F[J Tәys07_*VLa]%'TUkd%jQ.GS U}=g+89+?Pup \sQOV"Lq? wvӢ1ȃ8 ƽӚ+~#;$ﾎm<[S N0i=`jpvW+xkdO@Oid(1+ae]a8Bؽ+:} im iHy_ T_^E#|_GM?*r}0%&qhf5os,g[V< >.`􁃌Vq9ʻn%q^>!N<08PFe(kBxb~W?^/@I(Wѱ7Eb lnjg=ƭBt@( ,CSTXzƟv9,/ Tye)Ȗe-Ⱦ?/c&T =OppK#<,MI>2j=Zʲ_ 7+8sgNG'VЯV5.~E] 4'/A'qK+ fLvv<}$k/!00!}Gaa55_u\{k^(UOUHW`@i tW 3_0rxŔ~0yֿ2uqWt\{F5p]!᩷q4U*ʶ㊣yQK*XRuY͟b+$ :;y]?0TVu.r2i۶q:U.'% pۓ:/;MεLےwg g73wD(c9"[z~1riR~uCu"e>"^=בx:U]&*:/_G*3}te|d8~ESd|\2JKZSG3m`Kf$]MzlBeO囉|'c\dQTTC' :ҩ1Ȝ=sT~j\4Z9Mw`7Tx+m+[΢WKfFӈ$\_2& 7]¥{Lrd]n98u\lvr1ls^KŢ? ew!ˎ({2=>B-junvWݧJߙlßV~˱Yt,JZj%܅/sbc:௘>+ٝY #Vћ5K:\+9Tk2M IDATe鸅Lle2^mr|Й?ÏnͫF{{2XEzɢvYQ/_)ФϹFrd>2']dbnH\*jE>WtBŊTJC%Ο#:-k+|AOMuFW|q^ͅ`omUI63\gg?1ht\\?֕͒=i继> ic0ڔʳ5#7_# y/3#fejzx8`S%mxv紽qe}øq`|;jyo>WsOmەE=_Y%5 -סQo~+Α( `w|ܥ ԢOׇACvs7?.I9^7Z1xAItBIh CmVîG'-N^L\6½|M:Ccks=U'~^H)߅ug>]5"ױX|.H\*jŸb%1|b[6v8w@ͨ-N|'*03maze#v=//I,c;2@yFȩX!?fM i70=xL Xø7sz3#) Aͻ웘j.ar3S>b43uNk^&dFL>ݛ qeE|l%UHIvEWyR [+xX4GKGZR :cKM5a-dҒIs'eFi;rQGIl]Lէ]{y~̻m}}{Yc;ofUs7Selu9p͈jm*j`WN9}$2)VN]p~ql9}>l8qkO1N#JhwaoNI Y.fo1a_Sy+|6Z:߸Nʍ>5qwP=.^9.{U/7ۚ4՛kz>N~|C㝏h>#{rߓ%1ʧ,%0D^L'Υuz7<0QbPu)YğmAfO w;MJ+{xʴ`idVб)-N9]їkBNhp#XV_ɯ{.TrT~k=J^WzbUo/mSMybmrѴ7ѕB駢Υ!.2.;,T=Cuh?GeiҚ u=?Yuܒ>H ?BhRs8>y͡S/%ҳ}fXZw #,!\D*=T{f[PH>/vU%6I&&1 q5D\Hf^K6Oӿ]ʃ NKٹyMxeβ>%뿪%sػ/kˮc12Sh| Zwڱ&c6m[P*OP`˻ƻYs8?ݯ <|9ЍU$Щj?=rq^vʬl7eYFO4P$ 7eN:tu_PEF)mNK'k8$L ._luU2e g*UqRӻgcA?ZkI>'6 lWM7aiT/R']-lPUƕxVqӴJm70VOhv6* @e.w/1(YKnƥojJHR)ohX̀f-} ݨxFJ:ݓcxps;ӓӿJ#j8Ή'O^jI+ST4Ξ'6-ۥNxݏNI={m*j.k3Vk5tjlwˆ]ߧl  e^+Zy6+Uy]X>]Z IiY/(СNRg *,*MM2Ks}%^)+;KE'T׹B Xˤq[oۂԔtL O~3x+tף${c\ :U!jϮ`-^0Ns13plǠѬtC4[UAgPiVUʎCHEG⥍Lw}ۥU=Nf/YxГl56j[qɨ?mtTN92$."(=hZ7 }X$<ōgwz_̌R47}ѼH(Ӄ?3g'l1u,:Pͧ'K+Q<0tzO;֣5 ; *:/_G*3}te<ʦa{ˡ۝X476Kޞ#s.ђ|+cǓyr+(]i61>w3!e, WezMqmbU>r|n&3cƎu`3S {\2w|g#aU|xjfR`N J\*?-^jQ>ݕ+keO@|b-ǖ6/՛EJxLɍ]Jϓ.1w 8)-ߖF@wJ"&qSd%q?N1Z75tYxM؛)_t/LJPh{ϵI!xI +B!$*!BB B!D!ɄJ!dB%BQH2B!($P !BLB! I&TB!$*!BB B!D!ɄJ!dB0_7ONxt񟦍=V+><|=J%^$#Iѥō$hc_Newٷ;$&!( .mm);`eU ![ؾ,en'J$N}:܏|ޡ6XYRtM̫3n[kjϺ@Jmx cÿ!\9 MJ/:Ȃͨhu\%Y!s{Q+k*æRM;ucmm]E۩$z]O;,t\_wpڄgs:>Gݵ* Zv`ݏ϶[~L^4v{k0VOz`emC ZZ3(491Mu_٨P(_ l WtW=)?l.7uz{"wۏgp6'}, IJU)͟)T3)mԢV,7zesd~h}pOٿ~}~ΠzQk?cD8s{ٟl|Քr'SLO)Ww*}gY-WLbٸta? u}&OVEAEu{=<.z;﮸A.̿cgz:Up 2cLx][ԥuc(\;[H!pOU҅ +݄^SkW1o6GnL}ώj{C]dlY)6C> <&H'#OŃ |ٮ9kS+֌|-*Vn4qdmOP'mbgjhkҟĠ%rqpZWvHAUI3mV!/6OVP:^[B~m{t5Ɔz2@J.įsM<邯wD#te:48o9pǬ/ѣ, :.̯Cˍwєv<98o\7 5qq.gy8:31ûH>҆FujQϧf~ z24٥:6Tj˘m<=Rb|?2/f!]VQcni)iP!߶;ȸ!pn $gD3Bp Nnj?~_6BVn3ܽI +K `ihwM75]17Ns*` tLT–5u也g-Mu[`% ㅱ;ofUs7Se3t9p͈jm*e`WN9}$lMqԑk| I"K{yOZi%R/ͥSԫ߀Frj:5²ǧI|}Wԩgjɟ[-qɘxWZSy!?؃Ma6!X!ˬ4_1A{~6f j4 }sk~>}l t \Kxq!̔FYأ r}| Q7q0(I1سñ/{Uw=tÖg(ޏQ>e1V`ps0_7xypHNʍ>5qwū!{hH%&U[%Dsg8^ZEI܄:Vv΃ƣ;z9&1-mRU)KC\dl-㨍=)~FY?.2g xoQ|qB.^ T2g 9OߖLS߾<ϥ==(km{]zmt4x?1<+r"&TUCƒȲ8 xiZGʮnYgm{ %`V8eP|Qݫ4hɚfZ`z?R&/V<# Ġl}ؔͭE'MwQUV3f-ֽm^3{*:-eg㕪5"p|O.5gσibٍ~!~܏.,>N_U=,ϧc\<ݞoo4_ۙ}w[*]sػ?v//cBZ[ڨ22.! UےW 9 E#z//1A+1Wb삝SW&^|ߍ?ȅsr H2g&p+'cGªXR!˄*8zV͔nw:Pr!K]*CO}:tZ,=OF8G{/fve\_6K2UH݋GK+ ~|ܪ4=߂mLObx͸T4>qPک49؋luU1"?,L*@UjzL~,9GyKQG8YǑO'U|!J/WTy2~@[XF֜);jclV^JB"HX]Wmt/at/-m_{HȱNs")7Oqع.gܿmPJ>=1;mNҟ&KK!) ʧ'8 P'YT!d|!1Ez}']Vv`Jt?62:% 0 8. 7m*j.4s?iwD epz*^I=%xOC+;R xk,C׎͏fqξ }=sUY:Ѯ!>}+"+۳r)-WkJRW5^gslǠѬtC4[b'='*Q=1m DDzjO5gW0y/Dpv'fai!e&GB?}KiUw9K^$,$gfy ږĨ?mtTN92ُ[WXݷNd줶LPPA55 ̥u ܸp3Lc\di@ >g[vO?ȱ' @ $c욣E^b8})a~їrΕr+3!?lHu?(=ߧRl53ޡa `e@sB`5XQyigǢ6X:/_G*3}*s,Ϝo>`@5/D=:t`X0EhiJ`OAijw0,G;j2S:6>`X 63As4.;9 ? *mo]i61><yE#y#SV~+)E߂X\ϸ7_|}o9fi Y0d;`ǗtqPFx o76_3z!kG1t'K"BR+W[~B!/;P !BLB! I&TB!$*!BB B!D!ɄJ!dB%BQH2B!($P !BLB! I&TB!$*!BB B!D!ɄJ!dB%BQH2B!($P !BLB! I&TB!d, i tEݟׇBJDzC Bd""PssKr#2sg-pJ%J.nn. !xɹ {n.ЄJp]N-Z^JUh4®\ T(ȹh\ UFÙӧi wrHR(Y !GS3-!/!97ž PNGLl ..nȉ qcIMM{]Bsszssje)h/+B!^brn.:zn~毘 -wCp/l)b\^ؖ (B*عYbξVŀN(U֘i$ډ nܽsX_k'e"&/Tjʤ.B/><)x4XJxp7su>m'5D޻M*:FDqr(p%<SB!R{WQVB|LIۦmp$! 3Z&/ccc\]q!7Դihvr:I&TB!3fEDވW>19MJJ8we0llls_t|R"0/Zpuh(onH: ͵L|u:Ia-@kI Ԃ$c^ R" ]54Y! R׃x 򹼄BPsϢ ;bjj)~~KHH`;gђEEzJʦXFsjY36w&!,1AH:>s搸? $Ğ949T|L[iNXB!\\ݸv*2y$>|8Obb"N {prrƍȜ+E'I|N-?_IW?}GbbPU}9Ee| IDAT.y)k//.^DPkqHl<|7e)]Չk87f5M)[OqoBƥKpsuƍHA`IL8R䩓prtى7o`ogϥKVz5+0h  ca*o~t+9ȗzo8a\${/v||<&&t:J%Jp+kvFRT*t-o©oÐV(ҭ^}g.)'D*OBjՆ3 wfҽ#fb7#'%1ˡCll f\հ|N =zGrqtGs 0z 7 ͪ$c?k\%2p,Bt qNqw< UZZ*ii9(J @j^ejjj2 œW_B|Tvd+x TS ?2D(Jۮ\V!oxdd3<:VeA%@Ԇ.ZB!٢f0hlld"##zl66z23ł~ͼ~彯rׇsRG~Z/a& s\TVV( T'i3Weܹ4<zYrJ@1FI@ uƱU_z&0-4&v#[?~3 \9Ke(')xm{t-7!K=:ݠDeB!FE HMM!-EMM5v{u#G֍5KF/}%K85!׿QSֵc7rgU׭ _lrnJwJ5I+0xeοaUmbR@ܽdɟ;d-&BM6{<-^HRr"NxJJJ(-)Jt:IJNdx< T?V)Y90('=ƛ d:T %[_7}7r퀁]M7vy[DWf2gLe˩>~]ÌGfpЉ} ʾ{w3rѫP4Z+?J>rcl܄bc8nćwhIF3v?ڈ-B\*"F1-c씖Q[SHgڽ* 446LpG!l3f%^ [/\`AEU[-)Ŕ|6mdQ'N=J(&J蚆y jJ 67^ IOO:LDx2L8!v(Ǖꤩ UU4 9N]~>^XIwA+T*" :MZ/7ln`2Hǚv1w׷ ~}6!K9&MCSUƍ(ܹUQ2i IIجV㉷۱ZJNbꔩYٹsA_:UQ4 i,' zcLB!\n~ޱ|Pz+G8zO%{:Ϲ6?B!Dԑl]'JUUtCBBCt4+DJKJHMMbL5'IJJFQ:8R!lR *M˻-62l:QU npm[!`BJkt6*TM%==ܼ ]>
Manual do Miniaplicativo Netspeed v1.1 O miniaplicativo Netspeed mostra a quantidade de tráfego que transcorre por um determinado dispositivo de rede. 2002 Jörgen Scheibengruber 2008.Leonardo Gregianin (leogregianin@gmail.com)2008.Enrico Nicoletto (liverig@gmail.com)2008.Leonardo Ferreira Fontenelle (leonardof@gnome.org) Projeto de Documentação GNOME Permissão concedida para copiar, distribuir e/ou modificar este documento sob os termos da Licença de Documentação Livre GNU (GNU Free Documentation License), Versão 1.1 ou qualquer versão mais recente publicada pela Free Software Foundation; sem Seções Invariantes, Textos de Capa Frontal, e sem Textos de Contracapa. Você pode encontrar uma cópia da licença GFDL no link ou no arquivo COPYING-DOCS distribuído com este manual. Este manual é parte da coleção de manuais do GNOME distribuído sob os termos da licença GFDL. Se você quer distribuir este manual separadamente da coleção, você pode fazer desde que inclua uma cópia da licença do manual, como descrito na seção 6 da licença. Muitos dos nomes usados por companhias para distinguir seus produtos e serviços são mencionados como marcas comerciais. Onde estes nomes apareciam em qualquer documentação do GNOME, e os membros do Projeto de Documentação GNOME estão atentos a estas marcas registradas, então os nomes estão em letras maiúsculas ou com as iniciais em maiúsculas. O DOCUMENTO E VERSÕES MODIFICADAS DO DOCUMENTO SÃO FORNECIDOS SOB OS TERMOS DA GNU FREE DOCUMENTATION LICENSE COM O ENTENDIMENTO ADICIONAL DE QUE: O DOCUMENTO É FORNECIDO NA BASE "COMO ESTÁ", SEM GARANTIAS DE QUALQUER TIPO, TANTO EXPRESSA OU IMPLÍCITA, INCLUINDO, MAS NÃO LIMITADO A, GARANTIAS DE QUE O DOCUMENTO OU VERSÃO MODIFICADA DO DOCUMENTO SEJA COMERCIALIZÁVEL, LIVRE DE DEFEITOS, PRÓPRIO PARA UM PROPÓSITO ESPECÍFICO OU SEM INFRAÇÕES. TODO O RISCO A RESPEITO DA QUALIDADE, EXATIDÃO, E DESEMPENHO DO DOCUMENTO OU VERSÕES MODIFICADAS DO DOCUMENTO É DE SUA RESPONSABILIDADE. SE ALGUM DOCUMENTO OU VERSÃO MODIFICADA SE PROVAR DEFEITUOSO EM QUALQUER ASPECTO, VOCÊ (NÃO O ESCRITOR INICIAL, AUTOR OU QUALQUER CONTRIBUIDOR) ASSUME O CUSTO DE QUALQUER SERVIÇO NECESSÁRIO, REPARO OU CORREÇÃO. ESSA RENÚNCIA DE GARANTIAS CONSTITUI UMA PARTE ESSENCIAL DESTA LICENÇA. NENHUM USO DESTE DOCUMENTO OU VERSÃO MODIFICADA DESTE DOCUMENTO É AUTORIZADO SE NÃO FOR SOB ESSA RENÚNCIA; E SOB NENHUMA CIRCUNSTÂNCIA E SOB NENHUMA TEORIA LEGAL, TANTO EM DANO (INCLUINDO NEGLIGÊNCIA), CONTRATO, OU OUTROS, DEVEM O AUTOR, ESCRITOR INICIAL, QUALQUER CONTRIBUIDOR, OU QUALQUER DISTRIBUIDOR DO DOCUMENTO OU VERSÃO MODIFICADA DO DOCUMENTO, OU QUALQUER FORNECEDOR DE ALGUMA DESSAS PARTES, SER CONSIDERADOS RESPONSÁVEIS A QUALQUER PESSOA POR QUALQUER DANO, SEJA DIRETO, INDIRETO, ESPECIAL, ACIDENTAL OU CONSEQÜENCIAL DE QUALQUER INDIVÍDUO, INCLUINDO, MAS NÃO LIMITADO A, DANOS POR PERDA DE BOA VONTADE, TRABALHO PARADO, FALHA OU MAU FUNCIONAMENTO DO COMPUTADOR, OU QUALQUER E TODOS OS OUTROS DANOS OU PERDAS RESULTANTES OU RELACIONADOS AO USO DO DOCUMENTO E VERSÕES MODIFICADAS, MESMO QUE TAL PARTE TENHA SIDO INFORMADA DA POSSIBILIDADE DE TAIS DANOS. Jörgen Scheibengruber Projeto GNOME mfcn@gmx.de Pedro Villavicencio Garrido Projeto GNOME pvillavi@gnome.org 1.2 2006 Jörgen Scheibengruber mfcn@gmx.de 1.1 2005 Pedro Villavicencio Garrido pvillavi@gnome.org 1.0 2002 Jörgen Scheibengruber mfcn@gmx.de Este manual descreve a versão 0.12 do miniaplicativo Netspeed. Comentários Para informar um erro ou fazer uma sugestão a respeito do miniaplicativo Netspeed ou a este manual, envie um e-mail para Jörgen Scheibengruber. Miniaplicativo Netspeed Sobre o miniaplicativo Netspeed
Netspeed Netspeed.
Netspeed mostrando a soma em um painel de 48px. Netspeed mostrando a soma em um painel de 48px.
O miniaplicativo Netspeed exibe o tráfego de rede em um determinado dispositivo, como eth0, ppp0, plip0 etc. Além disso, fornece informações sobre a configuração do dispositivo de rede. Ícones do Netspeed no painel Ícone Descrição Loopback Interface de loopback. Ethernet Conexão ethernet. PPP Protocolo de conexão Ponto a Ponto. Sem fio Conexão sem fio. PLIP Conexão do protocolo de linha paralela de Internet. Adicionando o Netspeed a um painel Para adicionar o miniaplicativo Netspeed a um painel, clique com o botão direito do mouse sobre o painel e selecione Adicionar ao painelRedeMiniaplicativo Netspeed. Configuração
Configuração do miniaplicativo Netspeed Configuração do miniaplicativo Netspeed.
Neste diálogo você pode alterar a configuração do miniaplicativo Netspeed: Dispositivo de rede: Selecione o dispositivo de rede que o miniaplicativo deve monitorar a partir da lista suspensa da caixa de combinação. Geralmente todos os dispositivos disponíveis são listados, mas você também pode acrescentar outros. Intervalo de atualização: Digite o intervalo de tempo entre duas atualizações do miniaplicativo. Tamanho da fonte: Digite o tamanho do texto mostrado pelo miniaplicativo. Mostrar soma em vez de entrada e saída: Se você selecionar este botão o miniaplicativo mostrará o total de dados de saída e entrada. O miniaplicativo, neste caso, somente ocupará a metade do espaço no painel. Mostrar bits ao invés de bytes: Selecione isto se você quiser que o miniaplicativo exiba bits por segundo no lugar de bytes por segundo. Alterar ícone de acordo com o dispositivo especificado: Geralmente o miniaplicativo mostra o ícone que representa o tipo de dispositivo que está sendo monitorado. Então, mostrará um telefone para conexões Ponto a Ponto (ppp - modems, etc), uma placa de rede para ethernet (eth), etc. Se essa opção for desmarcada, o miniaplicativo sempre mostrará o ícone de rede, independentemente do dispositivo sendo monitorado. Sempre monitorar um dispositivo conectado, se possível: Quando uma conexão estiver inativa, o miniaplicativo Netspeed buscará alguma outra rodando para monitorá-la. O diálogo detalhes
O diálogo detalhes O diálogo detalhes
Este diálogo mostra informações úteis sobre a configuração de seu dispositivo de rede. Endereço de internet: O endereço IP (Protocolo de Internet) do dispositivo de rede. Máscara de rede: A máscara de rede depende do tamanho de sua LAN (Rede Local). Um valor típíco é 255.255.255.0 (rede de classe C). Endereço de hardware: Também conhecido como endereço físico ou endereço MAC (Media Access Control). É um identificador único no mundo para sua placa de rede. Endereço de P-t-P: O endereço de internet do "outro lado" da sua conexão PPP (Protocolo Ponto a Ponto). Bytes de entrada: É o total de bytes que o dispositivo de rede recebeu desde que foi conectado a internet. Bytes de saída: É o total de bytes que o dispositivo de rede enviou desde que foi conectado a internet.
netspeed_applet-0.16/help/pt_BR/pt_BR.po0000644000175000017500000005355711402462046015057 00000000000000# Brazilian Portuguese translation of Netspeed help # Copyright (C) 2008 Netspeed help's copyright holder # This file is distributed under the same license as the Netspeed help package. # Leonardo Gregianin , 2008. # Enrico Nicoletto , 2008. # Leonardo Ferreira Fontenelle , 2008. # msgid "" msgstr "" "Project-Id-Version: Netspeed Help\n" "POT-Creation-Date: 2008-11-07 15:24+0100\n" "PO-Revision-Date: 2008-12-27 21:34-0300\n" "Last-Translator: Enrico Nicoletto \n" "Language-Team: Brazilian Portuguese \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Poedit-Language: Portuguese\n" "X-Poedit-Country: BRAZIL\n" "Plural-Forms: nplurals=2; plural=(n != 1)\n" #. When image changes, this message will be marked fuzzy or untranslated for you. #. It doesn't matter what you translate it to: it's not used at all. #: C/netspeed_applet.xml:132(None) msgid "" "@@image: 'figures/netspeed_applet.png'; md5=11ef0533a2be1a5d1a9de77c4cec7f93" msgstr "" "@@image: 'figures/netspeed_applet.png'; md5=11ef0533a2be1a5d1a9de77c4cec7f93" #. When image changes, this message will be marked fuzzy or untranslated for you. #. It doesn't matter what you translate it to: it's not used at all. #: C/netspeed_applet.xml:144(None) msgid "@@image: 'figures/eth_sum_48.png'; md5=5113ce28da9b7712dafc52b3c13ccf32" msgstr "" "@@image: 'figures/eth_sum_48.png'; md5=5113ce28da9b7712dafc52b3c13ccf32" #. When image changes, this message will be marked fuzzy or untranslated for you. #. It doesn't matter what you translate it to: it's not used at all. #: C/netspeed_applet.xml:173(None) msgid "@@image: 'figures/loopback.png'; md5=0636b7d65b0626ee5e92dc0d28be5871" msgstr "@@image: 'figures/loopback.png'; md5=0636b7d65b0626ee5e92dc0d28be5871" #. When image changes, this message will be marked fuzzy or untranslated for you. #. It doesn't matter what you translate it to: it's not used at all. #: C/netspeed_applet.xml:185(None) msgid "@@image: 'figures/ethernet.png'; md5=48562a8b38e8eca91a3a8ee4ba4e3077" msgstr "@@image: 'figures/ethernet.png'; md5=48562a8b38e8eca91a3a8ee4ba4e3077" #. When image changes, this message will be marked fuzzy or untranslated for you. #. It doesn't matter what you translate it to: it's not used at all. #: C/netspeed_applet.xml:197(None) msgid "@@image: 'figures/ppp.png'; md5=b88d98a9ccdd489d91b45c8cf2dcbad1" msgstr "@@image: 'figures/ppp.png'; md5=b88d98a9ccdd489d91b45c8cf2dcbad1" #. When image changes, this message will be marked fuzzy or untranslated for you. #. It doesn't matter what you translate it to: it's not used at all. #: C/netspeed_applet.xml:209(None) msgid "@@image: 'figures/wavelan.png'; md5=90f925a64abe393adc5834fceba515fe" msgstr "@@image: 'figures/wavelan.png'; md5=90f925a64abe393adc5834fceba515fe" #. When image changes, this message will be marked fuzzy or untranslated for you. #. It doesn't matter what you translate it to: it's not used at all. #: C/netspeed_applet.xml:221(None) msgid "@@image: 'figures/plip.png'; md5=0761a22dfa7b0b56e41e020cd701db68" msgstr "@@image: 'figures/plip.png'; md5=0761a22dfa7b0b56e41e020cd701db68" #. When image changes, this message will be marked fuzzy or untranslated for you. #. It doesn't matter what you translate it to: it's not used at all. #: C/netspeed_applet.xml:249(None) msgid "@@image: 'figures/settings.png'; md5=219a6bc0e89cb9634d49025f9d3c6604" msgstr "@@image: 'figures/settings.png'; md5=219a6bc0e89cb9634d49025f9d3c6604" #. When image changes, this message will be marked fuzzy or untranslated for you. #. It doesn't matter what you translate it to: it's not used at all. #: C/netspeed_applet.xml:296(None) msgid "@@image: 'figures/details.png'; md5=60fedda8f88b634f16ab31090b5bdd67" msgstr "@@image: 'figures/details.png'; md5=60fedda8f88b634f16ab31090b5bdd67" #: C/netspeed_applet.xml:24(title) msgid "Netspeed Applet Manual V1.1" msgstr "Manual do Miniaplicativo Netspeed v1.1" #: C/netspeed_applet.xml:26(para) msgid "" "Netspeed Applet is shows how much traffic occurs on a specified network " "device." msgstr "" "O miniaplicativo Netspeed mostra a quantidade de tráfego que transcorre por " "um determinado dispositivo de rede." #: C/netspeed_applet.xml:29(year) C/netspeed_applet.xml:102(date) msgid "2002" msgstr "2002" #: C/netspeed_applet.xml:30(holder) msgid "Jörgen Scheibengruber" msgstr "Jörgen Scheibengruber" #: C/netspeed_applet.xml:41(publishername) msgid "GNOME Documentation Project" msgstr "Projeto de Documentação GNOME" #: C/netspeed_applet.xml:2(para) msgid "" "Permission is granted to copy, distribute and/or modify this document under " "the terms of the GNU Free Documentation License (GFDL), Version 1.1 or any " "later version published by the Free Software Foundation with no Invariant " "Sections, no Front-Cover Texts, and no Back-Cover Texts. You can find a copy " "of the GFDL at this link or " "in the file COPYING-DOCS distributed with this manual." msgstr "" "Permissão concedida para copiar, distribuir e/ou modificar este documento " "sob os termos da Licença de Documentação Livre GNU (GNU Free Documentation " "License), Versão 1.1 ou qualquer versão mais recente publicada pela Free " "Software Foundation; sem Seções Invariantes, Textos de Capa Frontal, e sem " "Textos de Contracapa. Você pode encontrar uma cópia da licença GFDL no " "link ou no arquivo COPYING-" "DOCS distribuído com este manual." #: C/netspeed_applet.xml:12(para) msgid "" "This manual is part of a collection of GNOME manuals distributed under the " "GFDL. If you want to distribute this manual separately from the collection, " "you can do so by adding a copy of the license to the manual, as described in " "section 6 of the license." msgstr "" "Este manual é parte da coleção de manuais do GNOME distribuído sob os termos " "da licença GFDL. Se você quer distribuir este manual separadamente da " "coleção, você pode fazer desde que inclua uma cópia da licença do manual, " "como descrito na seção 6 da licença." #: C/netspeed_applet.xml:19(para) msgid "" "Many of the names used by companies to distinguish their products and " "services are claimed as trademarks. Where those names appear in any GNOME " "documentation, and the members of the GNOME Documentation Project are made " "aware of those trademarks, then the names are in capital letters or initial " "capital letters." msgstr "" "Muitos dos nomes usados por companhias para distinguir seus produtos e " "serviços são mencionados como marcas comerciais. Onde estes nomes apareciam " "em qualquer documentação do GNOME, e os membros do Projeto de Documentação " "GNOME estão atentos a estas marcas registradas, então os nomes estão em " "letras maiúsculas ou com as iniciais em maiúsculas." #: C/netspeed_applet.xml:35(para) msgid "" "DOCUMENT IS PROVIDED ON AN \"AS IS\" BASIS, WITHOUT WARRANTY OF ANY KIND, " "EITHER EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES THAT " "THE DOCUMENT OR MODIFIED VERSION OF THE DOCUMENT IS FREE OF DEFECTS " "MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE OR NON-INFRINGING. THE ENTIRE " "RISK AS TO THE QUALITY, ACCURACY, AND PERFORMANCE OF THE DOCUMENT OR " "MODIFIED VERSION OF THE DOCUMENT IS WITH YOU. SHOULD ANY DOCUMENT OR " "MODIFIED VERSION PROVE DEFECTIVE IN ANY RESPECT, YOU (NOT THE INITIAL " "WRITER, AUTHOR OR ANY CONTRIBUTOR) ASSUME THE COST OF ANY NECESSARY " "SERVICING, REPAIR OR CORRECTION. THIS DISCLAIMER OF WARRANTY CONSTITUTES AN " "ESSENTIAL PART OF THIS LICENSE. NO USE OF ANY DOCUMENT OR MODIFIED VERSION " "OF THE DOCUMENT IS AUTHORIZED HEREUNDER EXCEPT UNDER THIS DISCLAIMER; AND" msgstr "" "O DOCUMENTO É FORNECIDO NA BASE \"COMO ESTÁ\", SEM GARANTIAS DE QUALQUER " "TIPO, TANTO EXPRESSA OU IMPLÍCITA, INCLUINDO, MAS NÃO LIMITADO A, GARANTIAS " "DE QUE O DOCUMENTO OU VERSÃO MODIFICADA DO DOCUMENTO SEJA COMERCIALIZÁVEL, " "LIVRE DE DEFEITOS, PRÓPRIO PARA UM PROPÓSITO ESPECÍFICO OU SEM INFRAÇÕES. " "TODO O RISCO A RESPEITO DA QUALIDADE, EXATIDÃO, E DESEMPENHO DO DOCUMENTO OU " "VERSÕES MODIFICADAS DO DOCUMENTO É DE SUA RESPONSABILIDADE. SE ALGUM " "DOCUMENTO OU VERSÃO MODIFICADA SE PROVAR DEFEITUOSO EM QUALQUER ASPECTO, " "VOCÊ (NÃO O ESCRITOR INICIAL, AUTOR OU QUALQUER CONTRIBUIDOR) ASSUME O CUSTO " "DE QUALQUER SERVIÇO NECESSÁRIO, REPARO OU CORREÇÃO. ESSA RENÚNCIA DE " "GARANTIAS CONSTITUI UMA PARTE ESSENCIAL DESTA LICENÇA. NENHUM USO DESTE " "DOCUMENTO OU VERSÃO MODIFICADA DESTE DOCUMENTO É AUTORIZADO SE NÃO FOR SOB " "ESSA RENÚNCIA; E" #: C/netspeed_applet.xml:55(para) msgid "" "UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, WHETHER IN TORT (INCLUDING " "NEGLIGENCE), CONTRACT, OR OTHERWISE, SHALL THE AUTHOR, INITIAL WRITER, ANY " "CONTRIBUTOR, OR ANY DISTRIBUTOR OF THE DOCUMENT OR MODIFIED VERSION OF THE " "DOCUMENT, OR ANY SUPPLIER OF ANY OF SUCH PARTIES, BE LIABLE TO ANY PERSON " "FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF " "ANY CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF GOODWILL, " "WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, OR ANY AND ALL OTHER DAMAGES " "OR LOSSES ARISING OUT OF OR RELATING TO USE OF THE DOCUMENT AND MODIFIED " "VERSIONS OF THE DOCUMENT, EVEN IF SUCH PARTY SHALL HAVE BEEN INFORMED OF THE " "POSSIBILITY OF SUCH DAMAGES." msgstr "" "SOB NENHUMA CIRCUNSTÂNCIA E SOB NENHUMA TEORIA LEGAL, TANTO EM DANO " "(INCLUINDO NEGLIGÊNCIA), CONTRATO, OU OUTROS, DEVEM O AUTOR, ESCRITOR " "INICIAL, QUALQUER CONTRIBUIDOR, OU QUALQUER DISTRIBUIDOR DO DOCUMENTO OU " "VERSÃO MODIFICADA DO DOCUMENTO, OU QUALQUER FORNECEDOR DE ALGUMA DESSAS " "PARTES, SER CONSIDERADOS RESPONSÁVEIS A QUALQUER PESSOA POR QUALQUER DANO, " "SEJA DIRETO, INDIRETO, ESPECIAL, ACIDENTAL OU CONSEQÜENCIAL DE QUALQUER " "INDIVÍDUO, INCLUINDO, MAS NÃO LIMITADO A, DANOS POR PERDA DE BOA VONTADE, " "TRABALHO PARADO, FALHA OU MAU FUNCIONAMENTO DO COMPUTADOR, OU QUALQUER E " "TODOS OS OUTROS DANOS OU PERDAS RESULTANTES OU RELACIONADOS AO USO DO " "DOCUMENTO E VERSÕES MODIFICADAS, MESMO QUE TAL PARTE TENHA SIDO INFORMADA DA " "POSSIBILIDADE DE TAIS DANOS." #: C/netspeed_applet.xml:28(para) msgid "" "DOCUMENT AND MODIFIED VERSIONS OF THE DOCUMENT ARE PROVIDED UNDER THE TERMS " "OF THE GNU FREE DOCUMENTATION LICENSE WITH THE FURTHER UNDERSTANDING THAT: " "" msgstr "" "O DOCUMENTO E VERSÕES MODIFICADAS DO DOCUMENTO SÃO FORNECIDOS SOB OS TERMOS " "DA GNU FREE DOCUMENTATION LICENSE COM O ENTENDIMENTO ADICIONAL DE QUE: " "" #: C/netspeed_applet.xml:48(firstname) C/netspeed_applet.xml:84(firstname) #: C/netspeed_applet.xml:104(firstname) msgid "Jörgen" msgstr "Jörgen" #: C/netspeed_applet.xml:49(surname) C/netspeed_applet.xml:85(surname) #: C/netspeed_applet.xml:105(surname) msgid "Scheibengruber" msgstr "Scheibengruber" #: C/netspeed_applet.xml:51(orgname) C/netspeed_applet.xml:60(orgname) msgid "GNOME Project" msgstr "Projeto GNOME" #: C/netspeed_applet.xml:53(email) C/netspeed_applet.xml:86(email) #: C/netspeed_applet.xml:106(email) msgid "mfcn@gmx.de" msgstr "mfcn@gmx.de" #: C/netspeed_applet.xml:57(firstname) C/netspeed_applet.xml:94(firstname) msgid "Pedro" msgstr "Pedro" #: C/netspeed_applet.xml:58(surname) C/netspeed_applet.xml:95(surname) msgid "Villavicencio Garrido" msgstr "Villavicencio Garrido" #: C/netspeed_applet.xml:62(email) C/netspeed_applet.xml:96(email) msgid "pvillavi@gnome.org" msgstr "pvillavi@gnome.org" #: C/netspeed_applet.xml:81(revnumber) msgid "1.2" msgstr "1.2" #: C/netspeed_applet.xml:82(date) msgid "2006" msgstr "2006" #: C/netspeed_applet.xml:91(revnumber) msgid "1.1" msgstr "1.1" #: C/netspeed_applet.xml:92(date) msgid "2005" msgstr "2005" #: C/netspeed_applet.xml:101(revnumber) msgid "1.0" msgstr "1.0" #: C/netspeed_applet.xml:112(releaseinfo) msgid "This manual describes version 0.12 of Netspeed Applet." msgstr "Este manual descreve a versão 0.12 do miniaplicativo Netspeed." #: C/netspeed_applet.xml:115(title) msgid "Feedback" msgstr "Comentários" #: C/netspeed_applet.xml:116(para) msgid "" "To report a bug or make a suggestion regarding the Netspeed Applet applet or " "this manual, send a e-mail to Jörgen Scheibengruber." msgstr "" "Para informar um erro ou fazer uma sugestão a respeito do miniaplicativo " "Netspeed ou a este manual, envie um e-mail para Jörgen Scheibengruber." #: C/netspeed_applet.xml:122(primary) msgid "Netspeed Applet" msgstr "Miniaplicativo Netspeed" #: C/netspeed_applet.xml:127(title) msgid "About Netspeed Applet" msgstr "Sobre o miniaplicativo Netspeed" #: C/netspeed_applet.xml:129(title) msgid "Netspeed" msgstr "Netspeed" #: C/netspeed_applet.xml:135(phrase) msgid "Netspeed." msgstr "Netspeed." #: C/netspeed_applet.xml:141(title) C/netspeed_applet.xml:147(phrase) msgid "Netspeed showing the sum in a 48px panel." msgstr "Netspeed mostrando a soma em um painel de 48px." #: C/netspeed_applet.xml:152(para) msgid "" "Netspeed Applet displays the network traffic on a " "specified device like eth0, ppp0, plip0, etc. More over it provides " "information about the configuration of the network device." msgstr "" "O miniaplicativo Netspeed exibe o tráfego de rede " "em um determinado dispositivo, como eth0, ppp0, plip0 etc. Além disso, " "fornece informações sobre a configuração do dispositivo de rede." #: C/netspeed_applet.xml:158(title) msgid "Netspeed Icons on Panel" msgstr "Ícones do Netspeed no painel" #: C/netspeed_applet.xml:165(para) msgid "Icon" msgstr "Ícone" #: C/netspeed_applet.xml:166(para) msgid "Description" msgstr "Descrição" #: C/netspeed_applet.xml:175(phrase) msgid "Loopback" msgstr "Loopback" #: C/netspeed_applet.xml:178(para) msgid "The Loopback interface." msgstr "Interface de loopback." #: C/netspeed_applet.xml:187(phrase) msgid "Ethernet" msgstr "Ethernet" #: C/netspeed_applet.xml:190(para) msgid "Ethernet connection." msgstr "Conexão ethernet." #: C/netspeed_applet.xml:199(phrase) msgid "PPP" msgstr "PPP" #: C/netspeed_applet.xml:202(para) msgid "Point to Point Protocol connection." msgstr "Protocolo de conexão Ponto a Ponto." #: C/netspeed_applet.xml:211(phrase) msgid "Wireless" msgstr "Sem fio" #: C/netspeed_applet.xml:214(para) msgid "Wireless connection." msgstr "Conexão sem fio." #: C/netspeed_applet.xml:223(phrase) msgid "PLIP" msgstr "PLIP" #: C/netspeed_applet.xml:226(para) msgid "Parallel Line Internet Protocol connection." msgstr "Conexão do protocolo de linha paralela de Internet." #: C/netspeed_applet.xml:235(title) msgid "To Add Netspeed to a Panel" msgstr "Adicionando o Netspeed a um painel" #: C/netspeed_applet.xml:236(para) msgid "" "To add Netspeed Applet to a panel, right-click on " "the panel, then choose Add to PanelNetworkNetspeed Applet." msgstr "" "Para adicionar o miniaplicativo Netspeed a um " "painel, clique com o botão direito do mouse sobre o painel e selecione " "Adicionar ao painelRedeMiniaplicativo Netspeed." #: C/netspeed_applet.xml:244(title) msgid "Settings" msgstr "Configuração" #: C/netspeed_applet.xml:246(title) msgid "Netspeed Applet Settings" msgstr "Configuração do miniaplicativo Netspeed" #: C/netspeed_applet.xml:252(phrase) msgid "Netspeed Applet Settings." msgstr "Configuração do miniaplicativo Netspeed." #: C/netspeed_applet.xml:257(para) msgid "In this dialog you can change the settings of Netspeed Applet:" msgstr "" "Neste diálogo você pode alterar a configuração do miniaplicativo Netspeed:" #: C/netspeed_applet.xml:261(para) msgid "" "Network device: Choose the network device that the " "applet should monitor from the popdown list of the combobox. Usually all " "available devices are listed, however you can enter one yourself, too." msgstr "" "Dispositivo de rede: Selecione o dispositivo de rede " "que o miniaplicativo deve monitorar a partir da lista suspensa da caixa de " "combinação. Geralmente todos os dispositivos disponíveis são listados, mas " "você também pode acrescentar outros." #: C/netspeed_applet.xml:265(para) msgid "" "Update interval: Enter the time between two updates of " "the applet." msgstr "" "Intervalo de atualização: Digite o intervalo de tempo " "entre duas atualizações do miniaplicativo." #: C/netspeed_applet.xml:268(para) msgid "" "Label font size: Enter the size of the text displayed " "in the applet." msgstr "" "Tamanho da fonte: Digite o tamanho do texto mostrado " "pelo miniaplicativo." #: C/netspeed_applet.xml:271(para) msgid "" "Show sum instead of in and out: If you check this box " "then the applet will show the sum of the in and out rate. The applet will " "take only half of the space in the panel in this case." msgstr "" "Mostrar soma em vez de entrada e saída: Se você " "selecionar este botão o miniaplicativo mostrará o total de dados de saída e " "entrada. O miniaplicativo, neste caso, somente ocupará a metade do espaço no " "painel." # msgid "Show _bits instead of bytes" #: C/netspeed_applet.xml:275(para) msgid "" "Show bits/s (b/s) instead of bytes/s (B/s): Check this " "if you want the applet to display bits per second instead of bytes/s." msgstr "" "Mostrar bits ao invés de bytes: Selecione isto se você " "quiser que o miniaplicativo exiba bits por segundo no lugar de bytes por " "segundo." #: C/netspeed_applet.xml:279(para) msgid "" "Change icon according to the selected device: Usually " "the applet will show an icon representing the type of network device you " "monitor. So it will show a phone for Point to Point connections (ppp - " "modems, etc.), a network card for ethernet (eth), etc. When this is " "unchecked, the applet will always show the network card icon, no matter " "which device you monitor." msgstr "" "Alterar ícone de acordo com o dispositivo especificado: " "Geralmente o miniaplicativo mostra o ícone que representa o tipo de " "dispositivo que está sendo monitorado. Então, mostrará um telefone para " "conexões Ponto a Ponto (ppp - modems, etc), uma placa de rede para ethernet " "(eth), etc. Se essa opção for desmarcada, o miniaplicativo sempre mostrará o " "ícone de rede, independentemente do dispositivo sendo monitorado." # conection is down significa "caída de conexão" ou que a conexão encontra-se inativa, não significando que a mesma encontra-se desconfigurada. #: C/netspeed_applet.xml:285(para) msgid "" "Always monitor a connected device, if possible: When " "your connection is down, Netspeed Applet look for a running one for " "monitoring." msgstr "" "Sempre monitorar um dispositivo conectado, se possível: " "Quando uma conexão estiver inativa, o miniaplicativo Netspeed buscará alguma " "outra rodando para monitorá-la." #: C/netspeed_applet.xml:291(title) C/netspeed_applet.xml:293(title) #: C/netspeed_applet.xml:299(phrase) msgid "The details dialog" msgstr "O diálogo detalhes" #: C/netspeed_applet.xml:304(para) msgid "" "This dialog shows you some useful information on the configuration of your " "network device." msgstr "" "Este diálogo mostra informações úteis sobre a configuração de seu " "dispositivo de rede." #: C/netspeed_applet.xml:309(para) msgid "" "Internet Address: The IP (Internet Protocol) address of " "the network device." msgstr "" "Endereço de internet: O endereço IP (Protocolo de " "Internet) do dispositivo de rede." #: C/netspeed_applet.xml:312(para) msgid "" "Netmask: The netmask which depends on the size of your " "LAN (Local Area Network). A usual value is 255.255.255.0 (a class C network)." msgstr "" "Máscara de rede: A máscara de rede depende do tamanho " "de sua LAN (Rede Local). Um valor típíco é 255.255.255.0 (rede de classe C)." #: C/netspeed_applet.xml:316(para) msgid "" "Hardware Address: Often also referred to as the " "physical or MAC (Media Access Control) address. A worldwide unique " "identifier for your network card." msgstr "" "Endereço de hardware: Também conhecido como endereço " "físico ou endereço MAC (Media Access Control). É um identificador único no " "mundo para sua placa de rede." #: C/netspeed_applet.xml:320(para) msgid "" "P-t-P Address: The internet address of the \"other side" "\" of your PPP (Point to Point Protocol) connection." msgstr "" "Endereço de P-t-P: O endereço de internet do \"outro " "lado\" da sua conexão PPP (Protocolo Ponto a Ponto)." #: C/netspeed_applet.xml:324(para) msgid "" "Bytes in: The amount of bytes that the network device " "has received since it has been connected to the network." msgstr "" "Bytes de entrada: É o total de bytes que o dispositivo " "de rede recebeu desde que foi conectado a internet." #: C/netspeed_applet.xml:328(para) msgid "" "Bytes out: The amout of bytes that the network device " "has sent since it has been connected to the network." msgstr "" "Bytes de saída: É o total de bytes que o dispositivo de " "rede enviou desde que foi conectado a internet." #. Put one translator per line, in the form of NAME , YEAR1, YEAR2. #: C/netspeed_applet.xml:0(None) msgid "translator-credits" msgstr "" "Leonardo Gregianin , 2008.\n" "Enrico Nicoletto , 2008.\n" "Leonardo Ferreira Fontenelle , 2008." netspeed_applet-0.16/help/sv/0000755000175000017500000000000011402462051013170 500000000000000netspeed_applet-0.16/help/sv/figures/0000755000175000017500000000000011402462051014634 500000000000000netspeed_applet-0.16/help/sv/figures/settings.png0000644000175000017500000006042111402462051017125 00000000000000PNG  IHDRq]] IDATxy\Tϰ, j nh&[eifi/"RKsR1w qa~z {yι>9sQ9#:B!zz! zSQ"{8_ti&ˆ0b]QQ(I3gc)|B T!D^;v?7^,pP@9r '̳aFF&7oKܸrԻUjJWJ*se(^iE!lZ~j\iգ/a钕yJMMܿu?N> j8x^ɑ$".^^% Ba4:::0q@76322VLKKcx23|(DFj&YyG).;tijBRt})Ipéx*o<ݚg0j%q;ʕ+UH!4' sX *VZ!gl[RX;6mwWs⣫ ڶH2e.]`׮m=/|2_Sߎ9Ͳ 0gΗj<ϙ3X6TϜ9_/;!S_1 6݃۷رc Mg:txZÇߓlذTe-7݃ѣ쏮M`)ݻ:߈Zެv߿=0vyʕJ%NN sh%鋗α66=r{{  4!"!%Kzr=ŎVEQμpp?25QfT~V 772RPfswT(}`^AH~S`v3_qFIٍgD8ګ *kZu988w!zkI&Lôi)]ڗ;a*VOʗٳgѱK|Ԩ;vƍиq;iٙchժ9_h۶# cN|َ=5 fh бcgo:B ͶW_RN͚A@}gFN6-5^yִiӁ}ҩS{lV٘]n'̙Ƞg~dddsc>Z1cFkS0X}o~5%&MZо+ƞW:n:ڶHZuK}䓜y -]q֏S*eMJ9y5'$nooyd 2p+*Tv eB^l.xTyJ*SjeooO&iѢU?>K.L1i 0k'dfQkҥu5jT%,f{C {h"w&605!.v-11UԨJp :s;wu)˽Lݯ]^ks4nܜ+Wݗ哜uUe=JOхb.Vw%:jNzS*5Jijxz\s oTbd*ATZlvmZnmϟ T^P(HO --IV,\Jlݺؓdff+v hڴe(V ݝwIOϻm~6)qUBSGŊA&Ν;T^wѬkWI<<YRR5oƍʗ/vbcg.zyœ>9'CcZh=r3uѫ./_rU;TqYBp|)׸wY*yUViΕ?w*" C)9o۶NdsttzV?:_|.nnNܾ}xtcde)5 lٲZ!͛X11cjp65ls>|Gb{ТKz0f{{{N<oBaOdd#֯_#JyP/Jw]꣱}3rC?1j(Ç5`@ ^ڼ,\ jTأC~Iμz7VC^_\@sv' #|j̫9}c38ǯ8q?%Y^<ǭڻb%T߫ jժgBM4l̪?90_ӧFTX.]S|}vW3oBM[̛7Sg<'skjժ1s\uùs}}X5kg}A*!Zn%>>%uNFrr[lSfJc]c_MرC,_ʕ+3cgL9{_&==gg'*Txӧ/l??gT,׮=\2-%..wy[^~`>w>g};LT)o=p7]fffpIohG}ؔ6cݯa g^ƍ3dI|}}p׷޸"ORHk޻JREG*d(3,=%O^{.v7nCo8ፆv/j5JddyWn[iex啗T,>^yk4IKKCVV?kT)/yw%++K߁AAHJJ:j/yV]'lӦgϞՕ^{U>}*;vl#82+>>qy}M&+KZΎ%Ի9mܻwdoJcSڔ{w7~-xOWN;z {sFiiTj N=Iu|9EB H.;;;ʖY&Ǔj;$ ! J7nO=!}>U"I_~$.6@B09O-їJ\!lL! 3q:ź\!Ug8˕B؀Y~yąJ$.w!uʙspB[ w! Bf?-BagNB )BaìS€G빥dc268B]lY4a|S=BG_~־tZf5V{7P(kÐWxecza,DQ/?k-<h٪)-Z6…سYud_YO4nԁ*_m믝|2s^ےʕҾ[9r\k #b8udԨܿ OkJ/SR]Z̾}Zǔ ͜?LW{IpztΝ{5;1ה2w-avTT֭^㧟6۬XCȶT 7BX;}9tV,G7Me:y_~7̙;{m/|N:akmk=#gu:&Ma,ΟĨQ^ԶLa!̙3#G3~Z{R12^lbE '}JppL-:1N-?r!ag$noy>wlǟ{x5R1eݻy+UwzLYǜLaboo+/w'$8N{>uZ2FS˜mQ2e!7sPI}–8wdddcj)ǎ uddd~S ~$e9sv?}4olJ±zz#G 6'N1ñV__g=kOl7t_f?$6l#"vs+Azz:?]P$8p8gΜ#8 upvvҔ( @\)z HJJ&).Ӧ}g=kOSNYm)OYioKV]P$ҥӧ%FCzak2 MFx1{7pnty7-Z4C͚ Ӡ/?+ߗ]t9n{!,(DK.Ӽ+>ϖ~*p 9L)g:^i^N!+++W5 7w!G&З?K>Pڵd ;wgg'W7>e&VC_~]kײªlQBagNB )Bad:E!lI)EBaLdBdڜL"BVsĿ9sCgʗzjv3S$ܻwv[\g\jjTV)_uEɖz6!  ]S vT_I'nok%Oui"++ GG/}YS j <=K1! 5Z)w axWJ"b8Iff&[ڥ9.͕3?wͧ;En1E$pQXj8^233.}YSD 2xڂEX}YNE\d+q;U\]c%-RW(J\&]svvGa gA^~IgY_bĈ,ԕ>VJ0m8~4,7}r_<N }ix<Ȩ$߶LUےܟRcSrEN?y}ĿT\b ɷ˾0^p9l*vט8a4T+W3phF$%eոRUSֵk3WQ*9s2Y~YªUkXpf!cx?233QTde=ro[2Vf+!ڞ9sܼ֭_k,qxN=zIBme>Ĵi\w ^p{Щc7ĤP(-&MŻk?``/עkTкMs+SƗbvͯ,XfMзE2̝7"mXƦǂLx j֭ٙ^k/[vG QT(Z!I?VTyJZYwиQT~֭p~i͛B/Ҿ[9s^kSfx7vt)"#ڰlY89OK$p6m^͎Iuys\>Į}S ڶ_!ӕC-0ulKhꫥ`m:OK$>a #Xww>x8^^x{{õݼy upvvͭG Ƴ:f&F狫+Q#yVuƎgIuL6??_w_ƞ֔mXYoo/ى};e1s|ڱDzzU+hlP*DGD>݀oupt$+3S<33Gb+M>2e|qqqw0eͲ}ĉ]ݔuٲh>?o]@jc,XUΉ١TT^IHmryBmr̜1ӤP( ~-ZxUkYmJ1XwgJV=WF߿ֶ_/͂"01Vݎ.-(( 6ڴmo$vMʖ7)+3GG27HffʟE1]ˌw:M9^,^I.^m;O K+q?Ҝ={>3gi@W5_OR>&*U~5m;`\x'wV ^{nLE\tDI~x]o̡!,^2G2m8Ənӷ^ӯ;oAJJJ[)MRRʅ:M9^Yºut*i'%%bIVĻuȑ8zdddpIF]_Zw$&&qN"'ۚ\ީS[NCR]2Y{>6== 'b89ʕkZs^\ֲ]_c̘]R̙|0xFZ3}gNU>dX.^L*YYʱT5 ).VՕo_C sP;E/NԮSsgO[\Xݔ߿,?,aժ5,\L<8  557n1n42[,*x=ܹcFO!F#Bk4bt܁{h[n[uQx{&h %ٖ6_ډa֧63BNԫgtM+ ؋:ڵ?ժF01nRCСREsXX(gŚ5m@>CO3wy_6KMPУ[L4ww*36OA spߓܼy]ަsq=^'-%ܝ3 ;$ eC֮ 0}8c;5fr%)5 !JN.G^ٱs}abUo;F^4 yJwA""byޣZW?\XƊL)`ol2'gCN%33ƂWB۱p>< fIzX]*T(O毒FVMpHIAnn%v0꒸9%N ; !$.}NZ.!aEƭ[(յxa QDEFF}vZ'ZWuqq& 0$qQ$gܤNJ U|!aą†IB&I\!l$q!aą†IB&I\!l$q!aHr*͛ ; qvYg۽oHJ(Cv(]Eg3mK- ("a*NE%S ;$q!ią†IBtz|v(IEP`@X+Jc R*cIFȁ"E'~=ػ '~R }.}hŖ%?OPhjF'^^^=Z]Q)SFscʔхYsϝ4s>Ie'e]I|ѢEڵSNVܹ3K.o߾O;L!LfuW⺼z֯oRVܿ0.\FG5 ͺ۷M]\. #:'MY`@} QR]:ӧiih+==ѣZ!52n4t*"#R1vS*U̚ G'NцeˢY|rNJ2e([,ӦMcٲe2v^{ek)籫\2v.;M$AQ2E6nn%8p6f$ܺͼ 5: dnbV/?ZkAVM5rr_dԷX{5gΗܼu:Z?qEs`VgAll,k&66C)L97s%SC璵$ިQ...l/_aǎ=f F텏7Oukʜy+۷)[֏3k?uX|)^܅~{5ԞXr[&>xo'E/k3vP<=K~u:&LWWWFfZ,[g hѢVٳ4J(y 1"g4sб)炡sZD~_Jb܅gMs˗'! g{>:mmZu{zzh~wqqFT>Q3Knoߡ\9 ʑpGkҥ}n-ZxUҲnܹΒ+ҥkT3EN%x=ͭ#}KS;79vM9 KԧE|6+f#O'j_O r%R/<5VX37o]T)oc)]ڇZ!f ]}v3&$$CѬY3>LHHH!Ge i.ƒͮߜcהs̕B`}Y~_ʧLMbbw$2yl^~lȐ\U*w΅ ]f=Cej׾SyܷIҡCc5ƌJ(JΜ9Gi_bj.\U,ٽ{wƍ׹vcǎgϞM3t^Waq-ƍfv]])-$`ooϗkթFV]h԰=>^|8dY3jd>s߃Ni%6] gLW]Ç'uIN2t{&<``/עkTкM<)1KXW,Xlr&=߿? 4 887nL>} +B5~ ?~F1t^N1?Nht~I?]Ǯss(5Xc6t}%*ܶo;F^ ; ĕJݻdDDaŊ׾[WA.eY<?pNjS%JΝ;sC5QzUʗgӦ&j ! Bm GCp2v71rXMY~Cݧ+C[ `z7T)vbptІ޽>`_XBm1z'>ҿڋh]淭Za<gggfΜot3gΗܼu:Z?qEsacX8Zj¨kyl͎뉏 1eu$ӥKɴiغu+k֬\r&3^,fֲ%W2`@O;;;qVo'R3fהm޼:8;;V#gz6T)OO28ӻOWRRR2ufY߾pĿO}z巭101 ??_\]]9͛> o&N_~Zgءxz4ΩK.םn70iHʔÝ'w[h$sN~g:t :mmGO}R0B#{7Yoۆ2wgrZ6)'s߶nܸEj^׭Ӓ;wMQ۷Py L.cV9'$$PsEb-&&>}rJTBTTT^o}:,^zBCCXdhwdDmiދb؏h8%\IIIFޞ4MMJ2-qZ}P,V>rJ)xsj&Q]T)o*U:e-ǚ,wttd 6 B… qrrW]͛7[Fh8RCDR '== 'b89ʕkF! \ŋWƍ7vZSN΅ Y]_c̘]R̙|0xi׾S!11;wC6 eIFiҸ~~ ?)cax4j??|eX§`}^rxyy]799Ǐ_NB}+G3q⧀ω{pqTFkm.PgYf Y$HWbM5W8BŪąB&I\!l$q!aą†IB&I\!l$q!aą†IB&I\!l$q!aą†IB&I\!l$q!aą†IBf쓚ɍLZ7\\ 8 +}6t<ׯߴXE}g&;S EP\ZMl =Y/ikkϙ01Vv(BX%NTboozxyy[׋u[޽m: -l70 0D_9[*FS9s͚5,XLM* /RRRڵ+ 0ZOx ]β[KZ5pX<@a"5$OJJ [fΝ=͒%PTZ333Yb5h_em7[wr4lЎ4eqq;! Z="!.\FG5ǯ 3g, cUDFb`mҷRb֬nNp><lKW9IO`)hHh;-X п?xoZ{ޘ SfI\VT>*Q*tܙ .gjԨaիR?6_7QVl3lx>2YjB>]9t/BPPS6ÁGشy5;v'm]gʋh]a[4.6:$WK9y_6l̙ el<ضn[G\\CO3w4M٬O'1mgnW/huѺU5l}kd=Աi/}dNx-vO p 47ؖ1Ç'uIN2t{&oZulB${?~ rr~}бc:t4*_by4'~ X>.}>[޴YC.)F$QTĬ#J<ڷ*p0j#{vOi<  IDATV GT1|'Yl'q! F.5†IB&I\!l$q!aą†IB&I\!l$q!aą†IB&I\!l$q!aą†IB&I\!l$q!aVSS3t1ɤǕdRS3M7 nr^S+Y;Dȶ5CN*̸ūY7ܹJhh( zvvvjbcO_hbf͜9&FѪUE^gf*oooTTE˩΢E c ̙s4kP\6ٿj87}㓛16 S}n2Ú|/:-HNg־3ǁ%iܜmL%NxX::{>DZvвUF)ILb)}Sl- 7}r_<NmV[w>B#sS7>cS0%Kzжmsbb~Ztw=,OCoK$,Ob/]Lf͚x{{֭[ [ϫt=T Gu+(W9ѕ# 55 9w ma1*heo.74G,f`@Ooh\רY/^kXϗu{n2/5lЎe˿b}/}al|)m/ѻ`m{{;J%Mt⇘%-g.X]=i?-=ɬXĉV|w}j ITZ/yR ӄ?ysʝ==MJJ*;nrZx%]tJ*W_Bry^Kn7nܢeWuJ`|Mi~X?Fm㟄ծI;cq{X-9r$?gZ'ו+rw>:'bF)UʇW5W[W^3͠3#7D WRRRQoݍ>}ixkwRL{բK>rJjmԫwWr)m6og12s=,OK_1y&ׯDh͐gIGMש{ig}:i>#$>t@zfP/?,a_Y`1Ç'uIN2t{fםm^ E׮V5!uz߿:vӺ{:t16Ɩh#'BAo1i,]̜}g,nsK j ˳76^GHH /"Beolzpq_;8SS`걶?BdIőr=XHB˪ąB&I\!l$q!aą†IB&I\!l$q!aą†IB&I\!l$o㢪?fYrA@A#2\̺i![jjT4\ӺmKf.Rb^7YdaF {=9gfŽI !B;&!.vLB\!옄B1 q!c6SS\lr\ Z}+8*^z52,xJq_ooJ2NV( gΜJWסLc-m8nH\գhpuu#χ+h|BV4mE~C믘"(mAq?Zm^}浍[*!`0pp0bA6o.]WρСq0j/thGt5BؑUyqk?1gW(U$JgWx'7_͛)<<))wf _ %zYl{k!c{m,[CY# }'[} &!!1O̓YbE}x%##QL·~ 4%+Mi:\f[uƧvvɹsx\U|j7uά[um=Y{tS5gZך㦑iۦ+u|ұ:toϿLtyb.Hԕײ3bGٶG }Gѭ[Hw¾}Q-JHH{6lo~CnϗqY~ڼGv̙ ?yO6oYDž/44oѝ>oL;пPD|[o`Y,m\x,#ys 1)o8x>Yb/9:c)F rlz'8c䵞=Vkgjr' {vx"[E~RNӿPv58:?χc^/Ü3wܹsm8U*@yp 4lڵ5^;sQh4lԭӌcshzk׍RRZ̊QVunHS: /_ F8zl ?`,Y2~'eemyߵh̺xyU 66{)ɜuxn\uZa@X_:thobzmZnNDfY>իpB,o[ɷ~ KA0̓YaժU2O>׮mZV\ǤIb|w-[D*T( ۻ5kzg_xqv:^m ps;~3g̙sܻkK#Wps-L{s%$ܠJUV6ڼu8}ڜqEsX .ىF1cFӿnHj*^^Us{̍}SW~nPrE*U*Y4<1!ޢegfLM-#8=˗%bXͷ+sG`qӶm J*ɽ{k:7,W0ʔ)iѼ<=qJHʕ&dRqt>y~|IF!55)mZ\9lG\<={u(YrkΟszn!L$%%1yCS :,p!Vb0~W~"#WƵk?nZ鹭'kY^ۂ w15ILLbtl uuڑd߾c-:j5*}լYk4kDA}7,F /c;JE߷`Y 듭q`#z ^K&kY'3m\|뷤i,0>*V|i,\iѼ.aaa}yￋ[YZ!k4ijJ|A֡)Wk;oS^ f~ynWZJ9zXݟ6ƣGNl`<9==hEڵF O3| \P֨kA|2éERkE!nfة]8UVcڔDF2|̘)|W:)*ũJ&#GLkJɑx|5믿̒ϖ898PFoFףVqtt;N A={nnݺS׬Ǭ8"!9vn*{dн;FԧG PcٳGvN+I*tzpPCěxhWC)6lr$ѨP_^d)TeFo ))$tTJ-Yb9di[G'##*=Ч!v?Yp?KSŐydnjP@;DLC]ݘgwGracm{m/ܙg2R3 GHڵ;wpm/^*zA`\Nҩy0]G}%< r}|7] ߇|9ωyo4Z5ks.:;k׎,tI5o 8h^/Af̀8pW-jE??УG/m }'[} &!!1-ZA߂Q&Q:xxzz0z0zEփW rC*S jAU 0( Kf0{3f~Z38˜1CZ2ww7:u|5kf&ZO&tғs6NOKKg߂&;d"?I\u)[.OIȻӲeݻ3a7(]ߗZg`\]]_ߗJ-Gx{`jĜ<:t۾fo?p-JB<)z 9cpJiޠ?w Ưѳ>e˦؈Dp ݻczDzmw{Ԏ1͝9w}[yEM.l^QT  3toIhhV̤2z,ըT*j5+V$tͥoKܶmggg'F~ZvʳĉЫ@Fj2x҅AQOYw%:C!5QXx.:˳/!2r'~̅ Ҟa(]TO677Wc D6oXf #ٵkoAVI$ĵZyBVZvK2ީVQ<y+܏?9sh*U*V 7LVC](e\Ar?3C\`j 66deʔfĈ1EQHU 4U_}|Y!jB *Wh|ntJJO` GGG)Ʉ6dH=f kKF%J88( iii$$$PۻUj+W?_g9!ē">=~3;+ha.̝=xy~T*kd1DE5ay+W͞Zlo"nmStz~g0oC3|ӦrCټnHD7pu>35j`lZcg.];2}\oԈO,^e-4mڄ˗q|pnBHGUݛf]u6vIwEq+r/Ξ=gjy!2kdMo~s ͚l߸I^M.pgX@!ē ..U+ְçFW6 wl?5yCi}1}>9O W[)_í[fۄۋof;j -[5qp(ڳ*@ixE:;~j6 6\xV~@K(e_c+$$bpt&4:u&*n |j7!-;=zZصsMXz#,Ş%A }Ke0ze<܅ 0(ُ UKiҤx)Xž~ur`uL4хM^իWyoͧ۠NJbru5^XP ]HZC '&'ݢa@._OsJ5xzzXuX=S#0dZ-3#8zoD4MBkiڴiʕzW}Uh4 HL)gtviل w}Os u4[vZ2DyF-ObrOg4jXc4>vaLDܼ0jy:U} FPP;=e&!>}8ǰaYZu_ݛPn*TZ>}#Gw˗˯W5{B}.`Ƿ Q899hF@ЋhPBe}9>yBCViњ3 qsͧZw5-&!^ۧ&IqttBQ~}7/;" - $xRpttdٲH&LIֹPQ}ٶ}Vϯ>M{,zx]9y n:}6}-?'55 GGGzj9ڮszeB<T*umHAE!n0,[ f5]$d/+Ū!r~֯ȤVh4t:["##9`s!DjjNgGʏ^]7Zgg'[#H9P#'Mw&t:ZJ"Dq 9`>k@CN]o>tԴBsqqZ*ԩmRX3 * ?IB'BXB1 q)IDAT!cBa$ąŽI !B;&!.vLB\!옄Bؑkٞ7xF_$'lRB:yM˪}vgݨ+Bk:y'Ng_}eqgGNAV'"_YGy8dr!SVC!E\!;IENDB`netspeed_applet-0.16/help/sv/figures/details.png0000644000175000017500000005776511402462051016733 00000000000000PNG  IHDRW IDATxwXSw{# ĉut9kuׁQj[W:ZuۯEQ7 (.Lِ%n&$$f q0HR`kQ*rM`m K2lٶ.;ʱ&x̂o LLLU @*D*A3=9C<ƚhԨ oժY+~ƕ+7J]*ڴKm1c".]V5 RPiq  |1tH?~}?CG"11O>[[+>f9Y?8 | YH2ep@޹1[.@03{?z~ V6 [ 3lv]E qn6m)ݝX,3ܳgtgg$'?oFL=zQFUG$C''gxg#p HRXNVΩSgOx{W~Zbcnر ڷ#?O©S177+uCwR)2q 8;rssnի]O?|E t ,p?8t R)L,]UF]?,q5 0;v߮vR1[df  :xQ#  .Ë{;PCcI333#C1ww=DҽcH:ۿ}x/xz~3T j"=*WΞe.kɣ$[[U.ER DVV\9M6ܹܹ;鏛7~ѫW?4offf7o s. |!jzVD~o믿F&~x" fffر 鏘h;;v4WCп VVV7/=ztߠukt"n"W܀aff9sfgrm(P篠[`Ν[oУGZzʲ47jԨ HHH3^4hDD"7.We331B笣J-W&l8YO ;18Tɀ=[ EF\J7^7zJ;՚ 5wX8؊`j"+;G=e5y9u47",lQ2֭[Y<23SU-w0lݺ) k2Ɔ `aa;wo@G [h-#++(,,ÇqQD||7x$R)о}'_DAA>j׮cDIei)""Q7={h= T֪[Ebb"4i?&6({ Uv͛7 7oF:uꌸ8)v{U} PPPKKsYyvvAaa}+r}-πEd¼t[J ^bJ(/Ύʾ@+;WHD(bʗU$"\沪eM)[W?ƍC$z9.\88&޵k\x,5jx /w;ƍ!H_A &&o=/KjB.=QD逴t+܆?997lleGǗmNMMEFd7O#>> jUӪl"\XYY"H0dffB,.D"h6劵\R1Hr30 OB1[*r^-Zi dIa&N@ϑp#L̬!b) Ri>ĩW"1 H "T>)!%%MnrI$ddo)r/ ׽05B-0vx.^ WWgdd0\]啥  ,8rD" /[`ooճ%ۛ {{8;;^҅Ӫl7zϞ=<==!Jeݝ;aff}<~ EHG0XZ@*)T*.#=RϮE~ ]P͂K 5p%Z R \a;Q:MD3Ѽǧ;^HD;g_25^QRժGIrR?O(Od9M?k|.6n܄}!eWj䎧Am6^~^՛(,ҥ &N޽]eiCDԩㅹs(]u4_Ѷ5455ōWD"S~C,UU=n)!ȣT*Ş=accDl{T~N+pGq'Wy +x|Kf Iq߯d wGhְ&jtߊ:B$ҥR q) B'=7Ѳ:3f(͐ի -f>*O͚V ;vFZ!I8>vZU+lvvvrm ǧ.)=zU@T4mժyF /t777ܹѻvm/iի@zzΞ@om7M^MLLpqqEf 8q ֭jԨUѪn7M5ݽv FժUݻƮ]PNmTww7 qb-T|nZ~sFQNG #}>wJpfpsEߤ( deee?A/>}nUDHB>ÃW\Ijht@վ}› \-˫4ɓh'!//&prr˗ѣ'wEmw>|,D VGGԬY ٸu+ I((( jԨ;w QQѸ!`eeڵΝhϯ ֮D.]:iUmkX<F ܼyϟVVpuu+\]U=enyyys'?E~~-''{xxT@Trc;pvqKd>ENc%(ܱ>wP`NKKS U$R = TۏEv޽MIDd\ƏTD,\bbѰ4ke'RXazzn޼ "}H8UE֭Ь/< 댟b """~Q hEIecBB">[rH=kkjZ_دK /_CR沈H\pzu/v!+3.+sYDDDZLedefz} S n:/uOsYO1#DDD3]V6߃\bJDn)u1G"""8ra/nnnxR|=zѣGϟc۶mpsS>"JqM̀H$­[W/ZQ6-M67c ]nnnhذ!Ұk.dgg_~rϽ[ҺAAA8zU$~C4h޽{cjСCBRR̙;\gŊ={sgygϞdeeﾃ\zPP;իnܸ|+ /1֬Y3?~RTu,xc 4Փplٲk׮E~~|^^^r˖K/^D~qaÆ )H${=W\aXr읻6VZ3337C]R ñc3ׯ/wÎ;P~}XXXfffʊ%""PFcM۷Ǚ3gdE[#33EDDƍݻ ڵ+N>Yރbݻw1t2ODDd [ =Xx1,X4]TrJA`ΝعsV!""vj ºu ""ro1?֤J:u ""rct4_s$""z("""*݃K DDD /10@ ""zht"/1^xx49N@DD%"""Hb """^b """.1S DDDec? H 0@ """DDD$ """`@DDD H 0@ """DDD$`>KG5DDD# DDD`!0@ """DDD$Hnjm0@ ""c@DDD$ """`@DDD H 0@ """DDT!Uo+4f ) $""",A@DDT%dcciGiq*@\Yg*$08 Qn2s*c|]1@ " Eջ4e """`@DD C DDD$ ""xB1@ "Jǘ¸`@DDD H 0@ ""ґtS$""" 7I2@ """DDD$^eѬ<* u+j!G")ScP)H[>/jjVIi)֩zD 0@ """DDD$ """`@DDR!U H 0@ """DDD$ """ld@DDCE߿P1@ ""VޙW B,+ DDDF˜fK 1Ύ0@ """DDd܍ve """"2J."""`@DDDfn2R" "r{g(;8`r D"VXT`ٲee!EttZHDD.ʫi,L]b;v,:vFA$_ŨQe˖RG강DDd2(ZJ*ǖhfFٳgx)͛?P:gFBBwR.=((ǎ 7n@~~>sY:t耓'Omۆ :uB֭""ҩXm=K([.1!33S ۫\gԩHLL ̙3۷o#-- jժqqq3fzBDDAT`[dzl`ܓP2Q7Xg233agg'[Nj/TjS\ 8AAAD\\~m `蝸)K֣>c-@y&Zj%[nٲ%n޼r///e%/_~pwwǸqa4_}(a۶mXd Vjժ!,, ?u֮] wwwTRرcٳgeyw؁&&&033"""-e5Ԁib lڴ Oƭ[pM:u [nUNDDnܸX$&&"44еkW>}+V`СfJ,Cٽzu֮*R!!! (ї(\RVܹ;w,{CH'txgwbYet3r>((֭3t3v""ma 4Ww5SE,*Em}g)*dPNC7ARX  TvDDQE8S%@u+jHG \U`@DDD:`kg^uDDDTBrr llt^?f8w.99.JFVu^wb"""`@DDD H 0@ """DDD$ """7)JRܸ~wuzcmmZjqDn<@{>22^wuzȪl IDATKWq}4hX͡p_""2_b?~-U:^}ܿcP1ܗ GBnn  ye=R}r_"JC7)z{!&2_D[B,@*H$(,s_"JCB`lRQCC7*DT& $$$!N#6hժ9<<nEAA[E0}2kP|kҵ\]]YZ)p2z µ6hH;ƺ/U&6 WWz}*r= Yٲe Tq=Yz~~>Bf·Qڴ? /cFOCchPF dYznnfL_ WVwW[lG/nQ^~ر};Ezm.\}[_-@#IſuM(.u}Wmsvq"= r3gwzztƜًdikl@rJ*"NġÿܹH3 K'pqxaU5k#33 C p]ԨL8}<~e ^;~}{⣑SpD؈N!gW|:edQ]^R[}H8PO1, OOXc̘y,>l&\\>#G߿5,aoo&`pvv ((k޼pvvҸLXtV>5XdѣۥnviRvq"ҽrcUApvvommX,[NJz5˖k֬e\qdgD"\YիW-רQMPF*nZmKLLL K`j*ٹo)n-"  ?-?~TiމB0l{8{c"qF܏ɓgiP:Jӗӳ {UT.-ŸoAçz,^4bUJxܽ Чo0dj+SJSGiR fW\G~~>q ̙ stt@tuo)}H8i| gg'腞M[/>GX6jaCǣ]VrӧO,?i[.27C s?]M:iNt" ƍxoo\}K1[D' t7=E"KPPP {<!k~FNƩ)e/%ER+Tob~܅/pAhɒūϓlZ Ѕԗ(/zzT~AO1kBn=:cqmOYT*QBd  ? 99JS`kg#[nۀ-Row1lnN/EҮC:jT)ܗ*"[DL 5ùss͆bmcV˖K=d8ƺ/U&6޽Y]TgQeїQ!)g*DbQeO1Dݻ:PPP>TUd\ _ QBzĄU:[@bD'ꋩ)$ sp|$ 6t?ܗWA%oD^z}`nni׵B{6tsKDD~\/ j@>n }pt D"4iM6uDDd8zI*&DDD$ """`@DDD H 0@ """DDD$ 蘷@D-T ^m"]cQRF L<}ۣ_W|I.=", ڡ_̘inߎ‡#&o{޽bcb mF>lbc>mOGLT*UlYUiGݱ^QtKJXK4o;cʯߺ*ˈ0me3{|}ppǔɟ؇7v:></~@kɓef8{9{͛7.S}W=ԵJ?[m⯝6;ɱ^t(;ԥNڵ/^c=8v]:;vEQn3wܓ-5\ZF 1edeeɕuvBjQWv=طo'"))YYm6y󏂾lgmzc׮}18qơ?NNprrĂf?n;5\\2{ .^R7aqkk+xzz`cpp&NcGmOhDG?PGձ S_ԯ…طuڢOp}E_]r1F>_3fLD*np̙w~U.3={kԣ3^U^2jZ~+n\w㰲-sc"֣Le3f>5"O’ūdkl@rJ*"NġÿܹWmQNu}1}>67n/k75J3>)h#"ϯik;E$&$]mIg#==CM~ċxG``Rק=C]t>2 :֕-z퉏FNؾc#^;]Ehv?~ E?Ň~PS~-^6ֵ?6bDשh4iHܸICSqn- ;srJOV"/ggG@NN.6{/ ء7~ԩd}\xLιGQ\ѤLu ''ڿ'=oQvMqmlv腱F (3U_U!)v'~: ;({=u.&L ^^KU_]V߿> D"`U(((Πxzp/U}W=ԵJkb015ŬYi%<Utm<UǸ>[8 7͛עq$X%w/BÆu1L_|BԽ 01y^"~6wibۏrA(:X bXeDu k:)ryԣI%]r; }.KOJz5˖k֬.(d;յcU8q} F^8z/Ҍ͒HOK`u5IH7_B@kkk̛?ίO<-KSr߿7Bf>mOe7}DDťKWiueJs=W<uo;U!uǺ 4/*2WgccrVV6lmmն4RjU_O*-s̝ `ggl4iQǏf?~Zv4moxy=rvH(z68;;aղ{@;ry8aktnAD"#ek8,,,'FT6mu377Ջ1q,64uǺG1/[0d888c:ohs (bW^W{ /7FzuTYZ!Ca%{bwǔsT2#//GOi%W#55 ))XhQ׎i!& HPX(( 0BfxѿSoݲ˗cOPwҥk , [^xƆ߿a[׻i_P~ҍu1x .\)c]4գQ~e o߃K38u)"*>b1`vfwWիAbs$$$aժ1hP_A`qF~C-7ش 2 IS L7^Z6ŀE&a5.G@2o< {ݷ3t6rssѥKG-'˿6< W`Ӧ JѢESY6;#FN{NݱPZC6PPPe<7꛺c=gWL:o̙^u[}ģ'w}[iMDDDTMDDDT0@ """DDD$ """`@DDD H 0@ """DDD$ """0xpIn[uǑ#9DDD# ob57wIq 2"?R)LL ""!8^FdU;Dɴ%Kbi7n/HRX%7 D東rWJk[< ע k şSZfDY 6 CK.1}RSd/0e4m~]e&^}Y>>a(0|>8$o/?x{wK4m}z+!%%U~T&E͚v¤nQLeC7Joك{vťx89]+8zW>]ݿkmyq]k8;߈Jv|4j"/cS&*K_`p̟8q7=={xF 2P>4yl g?gyrSHLeDDXb!rrrSQ^FLewX[[RfyMdh `ih È,K- u[2+Цu6o~]!WGZZ:ZRէDԕ%X+j c9ʒAp;W :v]i?1c"Tq;fΜ{k^- ߈cG`w 4o}Ν..=/^87͟''G899bg3z<ѣiMJw~,>0pttIq~W7^Y^~TV.`""+S=ftY6EE8W/;vEQn3wܓar/+ca̘ih ,^%p]])8}s^>^_~[_[=PeUU[qm8//_'?c|2m gf>9Xصk>5LUUV_~xzz!'ᓲt++K$$&Tehz`vvlle˶6rmQ?55 nn.jۥnҥktX,HOҥk\@B|"ﭰm9hִ7 =Es4NW]q?*T,Y۷5Xٺ>_TsEIK663f8n޼#K;͟gg'`A믺I;f*XUA``l&;\ ?A5@pȏ`7[ѳW7|NOF>SSS މiR*R~#<=(Lon :Pف*Mիނ@kQ^ӵ-}8p(>hV+˧mٺ>_Ts6\3Ԫ20*u%2[\XZZ=Z[o’ūT,^$ANHMMv T_FېD̟UԵW!Ca%{bwǔɯM(((T"AaX4@w7WHHHªU_cРlSŦcǎHKKG~~>] f)-sX,~ П>Gnn 1eX].~} mƆ߿`[[7`_O>ָ;GGDG?Kٺ>_Ts6 Ұ5/YZ.]]I  so6t<ڵkvi| gg'腞M[X$aćWbeo8vhڤ#!XG]ګGu2d6Ǵsܳ,k=j5 6_Ts6OkkYDnm|ADD$:>9ޯ>3Ķw!4_BXx3y2-]!0ޤHDDT\ڵнGΘ:mb@DDFcw1lnHDDD$ """`@DDD H 0@ """DDD$  "2<hJO/ܣEx ޏ_QM22sQqJ+TD@*\z _kղvlߋE_N+ukkkܺuKEy粳s`cjzF廬X,HOҥk^77|ظ{;&&zYpuu+>[8 ~HnRel"MUss2^~h[gT=1q)3 +d'ºu!HvF?VJˋODPM $'hggGVť9>_Wm66Α-geeVi9K"=-} jԨ'w޽ **VFkժt*c;+7"02+Tm~ t\.188c衸yM\033êUr5 6MʥիW%[q6֫,gg'lظnŅP'Vsssh0>}4 =~GMmT\djj\rjjz;R:Wbkkѣڵj\{ x[ s"' cҤr/ȕ1d ̝qC,2yXYn*/[le|}z7HL|$Z5 +6O㑛GBxFL2V3_1ÔYhRRREV{iSL q.jԨ>vrrrTss O>{b W= <薙 .ؠUfryLMM01no(e<6!C!!! u꼁IFX@ w[7n GqOdĻ-y*Zj.[kNjkMנN7tmdggw:m&fse1g"|[TGС*Lԝ+J 1uʧw/NNܹ* 4'b3z뉾z{dXCäɣe"}px.0.~܅/qAD_~qwh؎)<\dx</>uZwaQU3 b'"(`j .fKV\Pw54K,\*WC1SPPdAdԾ'.sϜx>L|-XGdai ODL?rEQ>5ls2cg(RwO~ނ/0rDn[+%%aCRӗ$b~;c}ij_HJOKÙSر3V^ !̣Df.BQvZ M)v110ѧ7`ݏK9rGZQXZZxCҸqCʾ[hԨ>Æ~/_jcۯ?e"f^_ůQ|bߔ}M8̎?{kX_9""ѧ+7/;cEmAP|93xDG_Зa#GrJ<#F a y7e˿m[_J18tXh4L2h԰ (vlFP*11h~~3ΟȮ{x~<Ծ6v쌕k < PwWHLbM{8bP_'Ni*_.ŜEx\u?ld1T vv ]}iԩ$'Bx\nNs c}oA]gϮynoj_;vʍ}挵Wa%rG۶yiiL]\j\_`_nܐUeߛݹsAO;v_{8Ç7 ש^~F{?\RWb/5bt_?}?ʞ&(ptzusoٕ!ҥmIK_};2eʘ܎# 0?Nڵ \BBj(}M GdZD_z88Tȧ&배9juoSر3Vn3gB0ʧBﯡw˗_,_{,)eT|<(q?Mʖ-CZZ ߻ѱ/˗mʕa2*YE@5cCeOc}yE#`iZ_VOSN8[ڰq6`\7X^5v_jl5?ӢeSK~3x́~\[y1;c>s+0G֭[t߬L2xz^}sMՆͥ]oH kk+.]1sǔ$%$11ɳR=}fܸ)sVKTT4ÆޛB υ Bh*'"ż#WWgrɽ_-Y_޳W7f\Yӻw\"ŋV0mj˿`.HFH ^Fj-z_Cr*l۶y .X_}0/ܿcggX{Q"3QTO%*{K^&==^x>׹޼̘9Y p4U:ٴW}yG2qB8>~-[d9w?o)}ڵy!C^hpRuenDXʞ&hnD!ә?)s^̙{v>}^Rl;_~ 9s<ҥKL P ؋^=z o_0:u-{1X_cj_;v B\KbB!ۖ/[EHL18 BǏ!B BBa@B! H@B! B!0 A!$ !€!B BBa@B! H@B! B!0 A!$ !€!B BBa@B! H@B! B!0`Y E3DEEG{z6ԬY R!xccFJn)juO;w9r8Qgqj!cMSS nP\YXqBts7E!{2Ƙ8ǘ" 9phh4*eIzz#=c Ht:4-ZEQ!OG1H@(! B<*b)EuRCHMMV}3BO ._Z-NNY:9s*2eJ3u\t!7ٱB[co_!bc>*U ZaeeU-}% _͛AmεqrJN<)mkGJJ2~~]6t<ϥzhBƍxl(*[V)Me[(L ˖I JUb94ha?~raL` ׆#zcǎq16o̦M8p (\Rmx5t0`@}S//kCFos6*;ѽ{'>d6=cY?KACro,p_GM <>C?ku:9}{(Orq@}Vm[p͛M^Ç233 !ѱ"coir/$_CAt-IiQ 3v0jԨ{t&-εYr-Ϸꊛk3wٳ39b">4kځ ,YBtpqwB]wy-l:t%b>ՠR2ꔻ3% +|t|}Yg&xl(G'--͠|ʕ}v[N>]/۸a+}XAعswa4@"jZʢ~rehP(_~<,8;viS#8u,iiwիY: B!JL m}:`t:.^ͷ1r`F(DGǰpr d7_>t-9Y{E שV~1)U!1:kkkP''1IC>l!w?O2rTڶ!3JYZ( $$$\,m<(~_gp'w{/q/]ѱRC!DP~cC5,_.Rj\rE]|Ҿ5mOY;;Թ߮@WʚI)4i¥K , ?GNJ~BW%J$$RP mY}e9\;3#X8Ԗ=-oy)$RD){HSBg1tdee15|.; ,]9ZnͲeس fBWF||<t:ӹ d6mF\ܿugrY^ܖ(Om}T2K 5|! :>|z[gFϚn-yK!pIMzSγ&Q>!Vؾwӱc[ xdʋYBxx \:=BpwSj5f&!B<$ !€!B BBa@B! H@B! B!0 A!$ !īKT8(!B׉2>umUp;k#4N!%+1*':'s^dXs4RBBFlBa693={BߒT_mJ*m B!umU~G)c.+IENDB`netspeed_applet-0.16/help/sv/netspeed_applet.xml0000644000175000017500000003463111402462046017021 00000000000000 ]>
Handbok för panelprogrammet Näthastighet v1.1 Panelprogrammet Näthastighet visar hur mycket trafik som skickas på en angiven nätverksenhet. 2002 Jörgen Scheibengruber Dokumentationsprojekt för GNOME Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License (GFDL), Version 1.1 or any later version published by the Free Software Foundation with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. You can find a copy of the GFDL at this link or in the file COPYING-DOCS distributed with this manual. This manual is part of a collection of GNOME manuals distributed under the GFDL. If you want to distribute this manual separately from the collection, you can do so by adding a copy of the license to the manual, as described in section 6 of the license. Many of the names used by companies to distinguish their products and services are claimed as trademarks. Where those names appear in any GNOME documentation, and the members of the GNOME Documentation Project are made aware of those trademarks, then the names are in capital letters or initial capital letters. DOCUMENT AND MODIFIED VERSIONS OF THE DOCUMENT ARE PROVIDED UNDER THE TERMS OF THE GNU FREE DOCUMENTATION LICENSE WITH THE FURTHER UNDERSTANDING THAT: DOCUMENT IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES THAT THE DOCUMENT OR MODIFIED VERSION OF THE DOCUMENT IS FREE OF DEFECTS MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE OR NON-INFRINGING. THE ENTIRE RISK AS TO THE QUALITY, ACCURACY, AND PERFORMANCE OF THE DOCUMENT OR MODIFIED VERSION OF THE DOCUMENT IS WITH YOU. SHOULD ANY DOCUMENT OR MODIFIED VERSION PROVE DEFECTIVE IN ANY RESPECT, YOU (NOT THE INITIAL WRITER, AUTHOR OR ANY CONTRIBUTOR) ASSUME THE COST OF ANY NECESSARY SERVICING, REPAIR OR CORRECTION. THIS DISCLAIMER OF WARRANTY CONSTITUTES AN ESSENTIAL PART OF THIS LICENSE. NO USE OF ANY DOCUMENT OR MODIFIED VERSION OF THE DOCUMENT IS AUTHORIZED HEREUNDER EXCEPT UNDER THIS DISCLAIMER; AND UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, WHETHER IN TORT (INCLUDING NEGLIGENCE), CONTRACT, OR OTHERWISE, SHALL THE AUTHOR, INITIAL WRITER, ANY CONTRIBUTOR, OR ANY DISTRIBUTOR OF THE DOCUMENT OR MODIFIED VERSION OF THE DOCUMENT, OR ANY SUPPLIER OF ANY OF SUCH PARTIES, BE LIABLE TO ANY PERSON FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF GOODWILL, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, OR ANY AND ALL OTHER DAMAGES OR LOSSES ARISING OUT OF OR RELATING TO USE OF THE DOCUMENT AND MODIFIED VERSIONS OF THE DOCUMENT, EVEN IF SUCH PARTY SHALL HAVE BEEN INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. Jörgen Scheibengruber GNOME-projektet mfcn@gmx.de Pedro Villavicencio Garrido GNOME-projektet pvillavi@gnome.org 1.2 2006 Jörgen Scheibengruber mfcn@gmx.de 1.1 2005 Pedro Villavicencio Garrido pvillavi@gnome.org 1.0 2002 Jörgen Scheibengruber mfcn@gmx.de Den här handboken beskriver version 0.12 av panelprogrammet Näthastighet. Återkoppling För att rapportera ett fel eller föreslå någonting angående panelprogrammet Näthastighet eller denna handbok, skicka ett e-postmeddelande till Jörgen Scheibengruber. Netspeed Applet Om panelprogrammet Näthastighet
Näthastighet Näthastighet.
Näthastighet visar summan i en 48 bildpunkter stor panel. Näthastighet visar summan i en 48 bildpunkter stor panel.
Panelprogrammet Näthastighet visar nätverkstrafiken på en angiven enhet som eth0, ppp0, plip0, etc. Det tillhandahåller även information om konfigurationen av nätverksgränssnittet. Näthastighetsikoner på panel Ikon Beskrivning Loopback Loopback-gränssnittet. Ethernet Ethernet-anslutning. PPP Punkt-till-punkt-protokoll-anslutning. Trådlös Trådlös anslutning. PLIP Parallel Line Internet Protocol-anslutning. Lägg till Näthastighet till en panel För att lägga till panelprogrammet Näthastighet till en panel, högerklicka på panelen och välj Lägg till i panelNätverkPanelprogrammet Näthastighet. Inställningar
Inställningar för panelprogrammet Näthastighet Inställningar för panelprogrammet Näthastighet.
I den här dialogrutan kan du ändra inställningarna för panelprogrammet Näthastighet: Nätverksenhet: Välj den nätverksenhet som panelprogrammet ska övervaka från rullgardinslistan för kombinationsrutan. Vanligtvis listas alla tillgängliga enhet men du kan även ange en själv. Uppdateringsintervall: Ange tiden mellan två uppdateringar för panelprogrammet. Typsnittsstorlek: Ange storleken för texten som visas i panelprogrammet. Visa summan istället för in och ut: Om du kryssar i den här rutan kommer panelprogrammet att visa summan för in och ut. Panelprogrammet kommer i det här fallet att endast ta halva utrymmet i panelen. Visa bitar istället för byte: Kryssa för den här om du vill att panelprogrammet ska visa bitar per sekund istället för byte per sekund. Ändra ikon efter den valda enheten: Vanligtvis visar panelprogrammet en ikon som representerar den typ av nätverksenhet som du övervakar. Det kommer till exempel att visa en telefon för Punkt-till-punkt-anslutningar (ppp - modem, etc.), ett nätverkskort för Ethernet (eth), etc. När den här inte är kryssad kommer panelprogrammet alltid att visa ett nätverkskort som ikon, oavsett vilken enhet du övervakar. Övervaka alltid en ansluten enhet, om möjligt: När din anslutning är nere kommer panelprogrammet Näthastighet att leta efter en som kör för att övervaka den. Dialogrutan för detaljer
Dialogrutan för detaljer Dialogrutan för detaljer
Den här dialogrutan visar användbar information om konfigurationen av din nätverksenhet. Internetadress: IP-adressen (Internet Protocol) för nätverksenheten. Nätmask: Nätmasken som beror på storleken av ditt LAN (Local Area Network). Ett normalt värde är 255.255.255.0 (ett klass C-nätverk). Hårdvaruadress: Refereras ofta till som den fysiska eller MAC-adressen (Media Access Control). En världsunik identifierare för ditt nätverkskort. P-t-P-adress: Internetadressen för "den andra sidan" av din PPP-anslutning (Point to Point Protocol). Byte in: Mängden byte som nätverksenheten har tagit emot sedan den blev ansluten till nätverket. Byte ut: Mängden byte som nätverksenheten har skickat sedan den blev ansluten till nätverket.
netspeed_applet-0.16/help/sv/sv.po0000644000175000017500000002734711402462046014121 00000000000000# Swedish translation of Netspeed Applet docs. # Copyright (C) 2004 Jörgen Scheibengruber # This file is distributed under the same license as the Netspeed package. # Daniel Nylander , 2006. # msgid "" msgstr "" "Project-Id-Version: netspeed doc\n" "POT-Creation-Date: 2006-09-24 18:37+0300\n" "PO-Revision-Date: 2006-09-25 20:20+0100\n" "Last-Translator: Daniel Nylander \n" "Language-Team: Swedish \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #: C/netspeed_applet.xml:24(title) msgid "Netspeed Applet Manual V1.1" msgstr "Handbok för panelprogrammet Näthastighet v1.1" #: C/netspeed_applet.xml:26(para) msgid "Netspeed Applet is shows how much traffic occurs on a specified network device." msgstr "Panelprogrammet Näthastighet visar hur mycket trafik som skickas på en angiven nätverksenhet." #: C/netspeed_applet.xml:29(year) #: C/netspeed_applet.xml:102(date) msgid "2002" msgstr "2002" #: C/netspeed_applet.xml:30(holder) msgid "Jörgen Scheibengruber" msgstr "Jörgen Scheibengruber" #: C/netspeed_applet.xml:41(publishername) msgid "GNOME Documentation Project" msgstr "Dokumentationsprojekt för GNOME" #: C/netspeed_applet.xml:48(firstname) #: C/netspeed_applet.xml:84(firstname) #: C/netspeed_applet.xml:104(firstname) msgid "Jörgen" msgstr "Jörgen" #: C/netspeed_applet.xml:49(surname) #: C/netspeed_applet.xml:85(surname) #: C/netspeed_applet.xml:105(surname) msgid "Scheibengruber" msgstr "Scheibengruber" #: C/netspeed_applet.xml:51(orgname) #: C/netspeed_applet.xml:60(orgname) msgid "GNOME Project" msgstr "GNOME-projektet" #: C/netspeed_applet.xml:53(email) #: C/netspeed_applet.xml:86(email) #: C/netspeed_applet.xml:106(email) msgid "mfcn@gmx.de" msgstr "mfcn@gmx.de" #: C/netspeed_applet.xml:57(firstname) #: C/netspeed_applet.xml:94(firstname) msgid "Pedro" msgstr "Pedro" #: C/netspeed_applet.xml:58(surname) #: C/netspeed_applet.xml:95(surname) msgid "Villavicencio Garrido" msgstr "Villavicencio Garrido" #: C/netspeed_applet.xml:62(email) #: C/netspeed_applet.xml:96(email) msgid "pvillavi@gnome.org" msgstr "pvillavi@gnome.org" #: C/netspeed_applet.xml:81(revnumber) msgid "1.2" msgstr "1.2" #: C/netspeed_applet.xml:82(date) msgid "2006" msgstr "2006" #: C/netspeed_applet.xml:91(revnumber) msgid "1.1" msgstr "1.1" #: C/netspeed_applet.xml:92(date) msgid "2005" msgstr "2005" #: C/netspeed_applet.xml:101(revnumber) msgid "1.0" msgstr "1.0" #: C/netspeed_applet.xml:112(releaseinfo) msgid "This manual describes version 0.12 of Netspeed Applet." msgstr "Den här handboken beskriver version 0.12 av panelprogrammet Näthastighet." #: C/netspeed_applet.xml:115(title) msgid "Feedback" msgstr "Återkoppling" #: C/netspeed_applet.xml:116(para) msgid "To report a bug or make a suggestion regarding the Netspeed Applet applet or this manual, send a e-mail to Jörgen Scheibengruber." msgstr "För att rapportera ett fel eller föreslå någonting angående panelprogrammet Näthastighet eller denna handbok, skicka ett e-postmeddelande till Jörgen Scheibengruber." #: C/netspeed_applet.xml:127(title) msgid "About Netspeed Applet" msgstr "Om panelprogrammet Näthastighet" #: C/netspeed_applet.xml:129(title) msgid "Netspeed" msgstr "Näthastighet" #: C/netspeed_applet.xml:135(phrase) msgid "Netspeed." msgstr "Näthastighet." #: C/netspeed_applet.xml:141(title) #: C/netspeed_applet.xml:147(phrase) msgid "Netspeed showing the sum in a 48px panel." msgstr "Näthastighet visar summan i en 48 bildpunkter stor panel." #: C/netspeed_applet.xml:152(para) msgid "Netspeed Applet displays the network traffic on a specified device like eth0, ppp0, plip0, etc. More over it provides information about the configuration of the network device." msgstr "Panelprogrammet Näthastighet visar nätverkstrafiken på en angiven enhet som eth0, ppp0, plip0, etc. Det tillhandahåller även information om konfigurationen av nätverksgränssnittet." #: C/netspeed_applet.xml:158(title) msgid "Netspeed Icons on Panel" msgstr "Näthastighetsikoner på panel" #: C/netspeed_applet.xml:165(para) msgid "Icon" msgstr "Ikon" #: C/netspeed_applet.xml:166(para) msgid "Description" msgstr "Beskrivning" #: C/netspeed_applet.xml:175(phrase) msgid "Loopback" msgstr "Loopback" #: C/netspeed_applet.xml:178(para) msgid "The Loopback interface." msgstr "Loopback-gränssnittet." #: C/netspeed_applet.xml:187(phrase) msgid "Ethernet" msgstr "Ethernet" #: C/netspeed_applet.xml:190(para) msgid "Ethernet connection." msgstr "Ethernet-anslutning." #: C/netspeed_applet.xml:199(phrase) msgid "PPP" msgstr "PPP" #: C/netspeed_applet.xml:202(para) msgid "Point to Point Protocol connection." msgstr "Punkt-till-punkt-protokoll-anslutning." #: C/netspeed_applet.xml:211(phrase) msgid "Wireless" msgstr "Trådlös" #: C/netspeed_applet.xml:214(para) msgid "Wireless connection." msgstr "Trådlös anslutning." #: C/netspeed_applet.xml:223(phrase) msgid "PLIP" msgstr "PLIP" #: C/netspeed_applet.xml:226(para) msgid "Parallel Line Internet Protocol connection." msgstr "Parallel Line Internet Protocol-anslutning." #: C/netspeed_applet.xml:235(title) msgid "To Add Netspeed to a Panel" msgstr "Lägg till Näthastighet till en panel" #: C/netspeed_applet.xml:236(para) msgid "To add Netspeed Applet to a panel, right-click on the panel, then choose Add to PanelNetworkNetspeed Applet." msgstr "För att lägga till panelprogrammet Näthastighet till en panel, högerklicka på panelen och välj Lägg till i panelNätverkPanelprogrammet Näthastighet." #: C/netspeed_applet.xml:244(title) msgid "Settings" msgstr "Inställningar" #: C/netspeed_applet.xml:246(title) msgid "Netspeed Applet Settings" msgstr "Inställningar för panelprogrammet Näthastighet" #: C/netspeed_applet.xml:252(phrase) msgid "Netspeed Applet Settings." msgstr "Inställningar för panelprogrammet Näthastighet." #: C/netspeed_applet.xml:257(para) msgid "In this dialog you can change the settings of Netspeed Applet:" msgstr "I den här dialogrutan kan du ändra inställningarna för panelprogrammet Näthastighet:" #: C/netspeed_applet.xml:261(para) msgid "Network device: Choose the network device that the applet should monitor from the popdown list of the combobox. Usually all available devices are listed, however you can enter one yourself, too." msgstr "Nätverksenhet: Välj den nätverksenhet som panelprogrammet ska övervaka från rullgardinslistan för kombinationsrutan. Vanligtvis listas alla tillgängliga enhet men du kan även ange en själv." #: C/netspeed_applet.xml:265(para) msgid "Update interval: Enter the time between two updates of the applet." msgstr "Uppdateringsintervall: Ange tiden mellan två uppdateringar för panelprogrammet." #: C/netspeed_applet.xml:268(para) msgid "Label font size: Enter the size of the text displayed in the applet." msgstr "Typsnittsstorlek: Ange storleken för texten som visas i panelprogrammet." #: C/netspeed_applet.xml:271(para) msgid "Show sum instead of in and out: If you check this box then the applet will show the sum of the in and out rate. The applet will take only half of the space in the panel in this case." msgstr "Visa summan istället för in och ut: Om du kryssar i den här rutan kommer panelprogrammet att visa summan för in och ut. Panelprogrammet kommer i det här fallet att endast ta halva utrymmet i panelen." #: C/netspeed_applet.xml:275(para) msgid "Show bits/s (b/s) instead of bytes/s (B/s): Check this if you want the applet to display bits per second instead of bytes/s." msgstr "Visa bitar istället för byte: Kryssa för den här om du vill att panelprogrammet ska visa bitar per sekund istället för byte per sekund." #: C/netspeed_applet.xml:279(para) msgid "Change icon according to the selected device: Usually the applet will show an icon representing the type of network device you monitor. So it will show a phone for Point to Point connections (ppp - modems, etc.), a network card for ethernet (eth), etc. When this is unchecked, the applet will always show the network card icon, no matter which device you monitor." msgstr "Ändra ikon efter den valda enheten: Vanligtvis visar panelprogrammet en ikon som representerar den typ av nätverksenhet som du övervakar. Det kommer till exempel att visa en telefon för Punkt-till-punkt-anslutningar (ppp - modem, etc.), ett nätverkskort för Ethernet (eth), etc. När den här inte är kryssad kommer panelprogrammet alltid att visa ett nätverkskort som ikon, oavsett vilken enhet du övervakar." #: C/netspeed_applet.xml:285(para) msgid "Always monitor a connected device, if possible: When your connection is down, Netspeed Applet look for a running one for monitoring." msgstr "Övervaka alltid en ansluten enhet, om möjligt: När din anslutning är nere kommer panelprogrammet Näthastighet att leta efter en som kör för att övervaka den." #: C/netspeed_applet.xml:291(title) #: C/netspeed_applet.xml:293(title) #: C/netspeed_applet.xml:299(phrase) msgid "The details dialog" msgstr "Dialogrutan för detaljer" #: C/netspeed_applet.xml:304(para) msgid "This dialog shows you some useful information on the configuration of your network device." msgstr "Den här dialogrutan visar användbar information om konfigurationen av din nätverksenhet." #: C/netspeed_applet.xml:309(para) msgid "Internet Address: The IP (Internet Protocol) address of the network device." msgstr "Internetadress: IP-adressen (Internet Protocol) för nätverksenheten." #: C/netspeed_applet.xml:312(para) msgid "Netmask: The netmask which depends on the size of your LAN (Local Area Network). A usual value is 255.255.255.0 (a class C network)." msgstr "Nätmask: Nätmasken som beror på storleken av ditt LAN (Local Area Network). Ett normalt värde är 255.255.255.0 (ett klass C-nätverk)." #: C/netspeed_applet.xml:316(para) msgid "Hardware Address: Often also referred to as the physical or MAC (Media Access Control) address. A worldwide unique identifier for your network card." msgstr "Hårdvaruadress: Refereras ofta till som den fysiska eller MAC-adressen (Media Access Control). En världsunik identifierare för ditt nätverkskort." #: C/netspeed_applet.xml:320(para) msgid "P-t-P Address: The internet address of the \"other side\" of your PPP (Point to Point Protocol) connection." msgstr "P-t-P-adress: Internetadressen för \"den andra sidan\" av din PPP-anslutning (Point to Point Protocol)." #: C/netspeed_applet.xml:324(para) msgid "Bytes in: The amount of bytes that the network device has received since it has been connected to the network." msgstr "Byte in: Mängden byte som nätverksenheten har tagit emot sedan den blev ansluten till nätverket." #: C/netspeed_applet.xml:328(para) msgid "Bytes out: The amout of bytes that the network device has sent since it has been connected to the network." msgstr "Byte ut: Mängden byte som nätverksenheten har skickat sedan den blev ansluten till nätverket." netspeed_applet-0.16/help/netspeed_applet.omf.in0000644000175000017500000000045111402462051016744 00000000000000 manual netspeed_applet-0.16/help/el/0000755000175000017500000000000011402462046013144 500000000000000netspeed_applet-0.16/help/el/netspeed_applet.xml0000644000175000017500000004376611402462045017001 00000000000000 ]>
Εγχειρίδιο μικροεφαρμογής Ταχύτητα δικτύου V1.1 Η μικροεφαρμογή Ταχύτητα δικτύου εμφανίζει το ποσό της κυκλοφορίας που υπάρχει σε μια καθορισμένη συσκευή δικτύου. 2002 Jörgen Scheibengruber Έργο τεκμηρίωσης του GNOME Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License (GFDL), Version 1.1 or any later version published by the Free Software Foundation with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. You can find a copy of the GFDL at this link or in the file COPYING-DOCS distributed with this manual. This manual is part of a collection of GNOME manuals distributed under the GFDL. If you want to distribute this manual separately from the collection, you can do so by adding a copy of the license to the manual, as described in section 6 of the license. Many of the names used by companies to distinguish their products and services are claimed as trademarks. Where those names appear in any GNOME documentation, and the members of the GNOME Documentation Project are made aware of those trademarks, then the names are in capital letters or initial capital letters. DOCUMENT AND MODIFIED VERSIONS OF THE DOCUMENT ARE PROVIDED UNDER THE TERMS OF THE GNU FREE DOCUMENTATION LICENSE WITH THE FURTHER UNDERSTANDING THAT: DOCUMENT IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES THAT THE DOCUMENT OR MODIFIED VERSION OF THE DOCUMENT IS FREE OF DEFECTS MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE OR NON-INFRINGING. THE ENTIRE RISK AS TO THE QUALITY, ACCURACY, AND PERFORMANCE OF THE DOCUMENT OR MODIFIED VERSION OF THE DOCUMENT IS WITH YOU. SHOULD ANY DOCUMENT OR MODIFIED VERSION PROVE DEFECTIVE IN ANY RESPECT, YOU (NOT THE INITIAL WRITER, AUTHOR OR ANY CONTRIBUTOR) ASSUME THE COST OF ANY NECESSARY SERVICING, REPAIR OR CORRECTION. THIS DISCLAIMER OF WARRANTY CONSTITUTES AN ESSENTIAL PART OF THIS LICENSE. NO USE OF ANY DOCUMENT OR MODIFIED VERSION OF THE DOCUMENT IS AUTHORIZED HEREUNDER EXCEPT UNDER THIS DISCLAIMER; AND UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, WHETHER IN TORT (INCLUDING NEGLIGENCE), CONTRACT, OR OTHERWISE, SHALL THE AUTHOR, INITIAL WRITER, ANY CONTRIBUTOR, OR ANY DISTRIBUTOR OF THE DOCUMENT OR MODIFIED VERSION OF THE DOCUMENT, OR ANY SUPPLIER OF ANY OF SUCH PARTIES, BE LIABLE TO ANY PERSON FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF GOODWILL, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, OR ANY AND ALL OTHER DAMAGES OR LOSSES ARISING OUT OF OR RELATING TO USE OF THE DOCUMENT AND MODIFIED VERSIONS OF THE DOCUMENT, EVEN IF SUCH PARTY SHALL HAVE BEEN INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. Jörgen Scheibengruber Έργο Gnome mfcn@gmx.de Pedro Villavicencio Garrido Έργο Gnome pvillavi@gnome.org 1.2 2006 Jörgen Scheibengruber mfcn@gmx.de 1.1 2005 Pedro Villavicencio Garrido pvillavi@gnome.org 1.0 2002 Jörgen Scheibengruber mfcn@gmx.de Αυτό το εγχειρίδιο περιγράφει την έκδοση 0.12 της μικροεφαρμογής Ταχύτητα δικτύου. Ανάδραση Για να αναφέρετε ένα σφάλμα ή να κάνετε μια πρόταση σχετικά με τη μικροεφαρμογή Ταχύτητα δικτύου (netspeed) ή αυτό το εγχειρίδιο, στείλτε ένα ηλ. γράμμα στο σύνδεσμο Jörgen Scheibengruber. Μικροεφαρμογή Ταχύτητα δικτύου Περί της μικροεφαρμογής Ταχύτητα δικτύου
Ταχύτητα δικτύου Ταχύτητα δικτύου.
Η Ταχύτητα δικτύου εμφανίζει τη συνολική κυκλοφορία σε έναν πίνακα εφαρμογών των 48 εικονοστοιχείων. Η Ταχύτητα δικτύου εμφανίζει τη συνολική κυκλοφορία σε έναν πίνακα εφαρμογών των 48 εικονοστοιχείων.
Η Μικροεφαρμογή Ταχύτητα δικτύου εμφανίζει την κυκλοφορία του δικτύου σε μια καθορισμένη συσκευή όπως οι eth0, ppp0, plip0, κλπ. Επιπλέον, παρέχει πληροφορίες σχετικά με τις ρυθμίσεις της συσκευής δικτύου. Εικονίδια της Ταχύτητας δικτύου στον πίνακα εφαρμογών Εικονίδιο Περιγραφή Loopback Η διεπαφή Loopback. Ethernet Σύνδεση ethernet. PPP Σύνδεση με πρωτόκολλο Point to Point. Ασύρματη Ασύρματη σύνδεση. PLIP Σύνδεση στο δίκτυο με πρωτόκολλο παράλληλης γραμμής. Για να προσθέσετε την Ταχύτητα δικτύου σε ένα πίνακα εφαρμογών Για να προσθέσετε τη Μικροεφαρμογή Ταχύτητα δικτύου σε έναν πίνακα εφαρμογών, κάντε δεξί κλικ με το ποντίκι σας στον πίνακα εφαρμογών, ύστερα επιλέξτε Προσθήκη στον πίνακα εφαρμογώνΔιαδίκτυοΜικροεφαρμογή netspeed. Ρυθμίσεις
Ρυθμίσεις της μικροεφαρμογής Ταχύτητα δικτύου Ρυθμίσεις της μικροεφαρμογής Ταχύτητα δικτύου
Σε αυτόν το διάλογο μπορείτε να αλλάξετε τις ρυθμίσεις της μικροεφαρμογής Ταχύτητα δικτύου: Συσκευή δικτύου: Επιλέξτε τη συσκευή δικτύου που η εφαρμογή θα παρακολουθεί από τη λίστα του κουτιού πολλαπλών επιλογών. Συνήθως όλες οι διαθέσιμες συσκευές είναι στη λίστα, παρόλα αυτά μπορείτε να προσθέσετε μια δική σας επίσης. Ενημέρωση διαστήματος: Εισάγετε το χρόνο μεταξύ δύο ενημερώσεων της μικροεφαρμογής. Μέγεθος γραμματοσειράς ετικετών: Εισάγετε το μέγεθος του κειμένου που θα εμφανίζεται στη μικροεφαρμογή. Προβολή του συνόλου αντί για τα εισερχόμενα και τα εξερχόμενα: Αν κάνετε τικ σε αυτό το κουτί η μικροεφαρμογή θα εμφανίζει τη συνολική ταχύτητα των εισερχομένων και των εξερχομένων. Σε αυτήν την περίπτωση, η μικροεφαρμογή καταλαμβάνει μόνο το μισό του διαστήματος στον πίνακα εφαρμογών. Εμφάνιση με bit/s (b/s) αντί για byte/s (B/s): Διαλέξτε αυτήν την επιλογή αν θέλετε η μικροεφαρμογή να εμφανίζει bit ανά δευτερόλεπτο αντί για byte ανά δευτερόλεπτο. Αλλαγή εικονιδίου σύμφωνα με την επιλεγμένη συσκευή: Συνήθως η εφαρμογή θα εμφανίσει ένα εικονίδιο που θα αναπαριστά τον τύπο της συσκευής δικτύου που παρακολουθείτε. Με αυτόν τον τρόπο θα εμφανίσει ένα τηλέφωνο για συνδέσεις Point to Point (ppp - modems, κλπ.), μία κάρτα δικτύου για ethernet (eth), κλπ. Όταν δεν διαλέγετε την επιλογή, η μικροεφαρμογή θα εμφανίζει πάντα το εικονίδιο της κάρτας δικτύου, άσχετα ποια συσκευή παρακολουθείτε. Να παρακολουθείται πάντα η συνδεδεμένη συσκευή, αν είναι δυνατόν: Όταν η σύνδεσή σας είναι κάτω, η μικροεφαρμογή Ταχύτητα δικτύου ψάχνει για μια συσκευή που λειτουργεί. Ο διάλογος των λεπτομερειών
Ο διάλογος των λεπτομερειών Ο διάλογος των λεπτομερειών
Ο διάλογος σάς παρέχει μερικές πληροφορίες σχετικά με τις ρυθμίζει της συσκευής δικτύου σας. Διεύθυνση δικτύου: Η διεύθυνση IP (Internet Protocol) της συσκευής δικτύου. Μάσκα δικτύου: Η μάσκα δικτύου (netmask) εξαρτάται από το μέγεθος του τοπικού σας δικτύου LAN (Local Area Network). Μία συνηθισμένη τιμή της είναι η 255.255.255.0 (μια κλάση C του δικτύου). Διεύθυνση υλικού: Συχνά αναφέρεται ως η φυσική ή MAC (Media Access Control) διεύθυνση. Ένας μοναδικός στον κόσμο προσδιοριστής για την κάρτα δικτύου σας. Διεύθυνση P-t-P: Η διεύθυνση δικτύου της "άλλης πλευράς" της σύνδεσής σας PPP (Point to Point Protocol). Εισερχόμενα byte: Ο αριθμός των byte που η συσκευή δικτύου έχει λάβει από τη στιγμή που συνδέθηκε με το δίκτυο. Εξερχόμενα byte: Το ποσό των byte που η συσκευή δικτύου έχει στείλει από τη στιγμή που συνδέθηκε με το δίκτυο.
netspeed_applet-0.16/help/el/el.po0000644000175000017500000005301611402462046014031 00000000000000# translation of el.po to Greek # Simos Xenitellis , 2008. msgid "" msgstr "" "Project-Id-Version: el\n" "POT-Creation-Date: 2008-03-17 04:16+0000\n" "PO-Revision-Date: 2008-03-18 11:20+0000\n" "Last-Translator: Simos Xenitellis \n" "Language-Team: Greek \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" "X-Poedit-Language: Greek\n" "X-Poedit-Country: GREECE\n" "X-Generator: KBabel 1.11.4\n" #. When image changes, this message will be marked fuzzy or untranslated for you. #. It doesn't matter what you translate it to: it's not used at all. #: C/netspeed_applet.xml:132(None) msgid "@@image: 'figures/netspeed_applet.png'; md5=11ef0533a2be1a5d1a9de77c4cec7f93" msgstr "@@image: 'figures/netspeed_applet.png'; md5=11ef0533a2be1a5d1a9de77c4cec7f93" #. When image changes, this message will be marked fuzzy or untranslated for you. #. It doesn't matter what you translate it to: it's not used at all. #: C/netspeed_applet.xml:144(None) msgid "@@image: 'figures/eth_sum_48.png'; md5=5113ce28da9b7712dafc52b3c13ccf32" msgstr "@@image: 'figures/eth_sum_48.png'; md5=5113ce28da9b7712dafc52b3c13ccf32" #. When image changes, this message will be marked fuzzy or untranslated for you. #. It doesn't matter what you translate it to: it's not used at all. #: C/netspeed_applet.xml:173(None) msgid "@@image: 'figures/loopback.png'; md5=0636b7d65b0626ee5e92dc0d28be5871" msgstr "@@image: 'figures/loopback.png'; md5=0636b7d65b0626ee5e92dc0d28be5871" #. When image changes, this message will be marked fuzzy or untranslated for you. #. It doesn't matter what you translate it to: it's not used at all. #: C/netspeed_applet.xml:185(None) msgid "@@image: 'figures/ethernet.png'; md5=48562a8b38e8eca91a3a8ee4ba4e3077" msgstr "@@image: 'figures/ethernet.png'; md5=48562a8b38e8eca91a3a8ee4ba4e3077" #. When image changes, this message will be marked fuzzy or untranslated for you. #. It doesn't matter what you translate it to: it's not used at all. #: C/netspeed_applet.xml:197(None) msgid "@@image: 'figures/ppp.png'; md5=b88d98a9ccdd489d91b45c8cf2dcbad1" msgstr "@@image: 'figures/ppp.png'; md5=b88d98a9ccdd489d91b45c8cf2dcbad1" #. When image changes, this message will be marked fuzzy or untranslated for you. #. It doesn't matter what you translate it to: it's not used at all. #: C/netspeed_applet.xml:209(None) msgid "@@image: 'figures/wavelan.png'; md5=90f925a64abe393adc5834fceba515fe" msgstr "@@image: 'figures/wavelan.png'; md5=90f925a64abe393adc5834fceba515fe" #. When image changes, this message will be marked fuzzy or untranslated for you. #. It doesn't matter what you translate it to: it's not used at all. #: C/netspeed_applet.xml:221(None) msgid "@@image: 'figures/plip.png'; md5=0761a22dfa7b0b56e41e020cd701db68" msgstr "@@image: 'figures/plip.png'; md5=0761a22dfa7b0b56e41e020cd701db68" #. When image changes, this message will be marked fuzzy or untranslated for you. #. It doesn't matter what you translate it to: it's not used at all. #: C/netspeed_applet.xml:249(None) msgid "@@image: 'figures/settings.png'; md5=219a6bc0e89cb9634d49025f9d3c6604" msgstr "@@image: 'figures/settings.png'; md5=219a6bc0e89cb9634d49025f9d3c6604" #. When image changes, this message will be marked fuzzy or untranslated for you. #. It doesn't matter what you translate it to: it's not used at all. #: C/netspeed_applet.xml:296(None) msgid "@@image: 'figures/details.png'; md5=60fedda8f88b634f16ab31090b5bdd67" msgstr "@@image: 'figures/details.png'; md5=60fedda8f88b634f16ab31090b5bdd67" #: C/netspeed_applet.xml:24(title) msgid "Netspeed Applet Manual V1.1" msgstr "Εγχειρίδιο μικροεφαρμογής Ταχύτητα δικτύου V1.1" #: C/netspeed_applet.xml:26(para) msgid "Netspeed Applet is shows how much traffic occurs on a specified network device." msgstr "Η μικροεφαρμογή Ταχύτητα δικτύου εμφανίζει το ποσό της κυκλοφορίας που υπάρχει σε μια καθορισμένη συσκευή δικτύου." #: C/netspeed_applet.xml:29(year) #: C/netspeed_applet.xml:102(date) msgid "2002" msgstr "2002" #: C/netspeed_applet.xml:30(holder) msgid "Jörgen Scheibengruber" msgstr "Jörgen Scheibengruber" #: C/netspeed_applet.xml:41(publishername) msgid "GNOME Documentation Project" msgstr "Έργο τεκμηρίωσης του GNOME" #: C/netspeed_applet.xml:2(para) msgid "Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License (GFDL), Version 1.1 or any later version published by the Free Software Foundation with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. You can find a copy of the GFDL at this link or in the file COPYING-DOCS distributed with this manual." msgstr "" #: C/netspeed_applet.xml:12(para) msgid "This manual is part of a collection of GNOME manuals distributed under the GFDL. If you want to distribute this manual separately from the collection, you can do so by adding a copy of the license to the manual, as described in section 6 of the license." msgstr "" #: C/netspeed_applet.xml:19(para) msgid "Many of the names used by companies to distinguish their products and services are claimed as trademarks. Where those names appear in any GNOME documentation, and the members of the GNOME Documentation Project are made aware of those trademarks, then the names are in capital letters or initial capital letters." msgstr "" #: C/netspeed_applet.xml:35(para) msgid "DOCUMENT IS PROVIDED ON AN \"AS IS\" BASIS, WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES THAT THE DOCUMENT OR MODIFIED VERSION OF THE DOCUMENT IS FREE OF DEFECTS MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE OR NON-INFRINGING. THE ENTIRE RISK AS TO THE QUALITY, ACCURACY, AND PERFORMANCE OF THE DOCUMENT OR MODIFIED VERSION OF THE DOCUMENT IS WITH YOU. SHOULD ANY DOCUMENT OR MODIFIED VERSION PROVE DEFECTIVE IN ANY RESPECT, YOU (NOT THE INITIAL WRITER, AUTHOR OR ANY CONTRIBUTOR) ASSUME THE COST OF ANY NECESSARY SERVICING, REPAIR OR CORRECTION. THIS DISCLAIMER OF WARRANTY CONSTITUTES AN ESSENTIAL PART OF THIS LICENSE. NO USE OF ANY DOCUMENT OR MODIFIED VERSION OF THE DOCUMENT IS AUTHORIZED HEREUNDER EXCEPT UNDER THIS DISCLAIMER; AND" msgstr "" #: C/netspeed_applet.xml:55(para) msgid "UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, WHETHER IN TORT (INCLUDING NEGLIGENCE), CONTRACT, OR OTHERWISE, SHALL THE AUTHOR, INITIAL WRITER, ANY CONTRIBUTOR, OR ANY DISTRIBUTOR OF THE DOCUMENT OR MODIFIED VERSION OF THE DOCUMENT, OR ANY SUPPLIER OF ANY OF SUCH PARTIES, BE LIABLE TO ANY PERSON FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF GOODWILL, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, OR ANY AND ALL OTHER DAMAGES OR LOSSES ARISING OUT OF OR RELATING TO USE OF THE DOCUMENT AND MODIFIED VERSIONS OF THE DOCUMENT, EVEN IF SUCH PARTY SHALL HAVE BEEN INFORMED OF THE POSSIBILITY OF SUCH DAMAGES." msgstr "" #: C/netspeed_applet.xml:28(para) msgid "DOCUMENT AND MODIFIED VERSIONS OF THE DOCUMENT ARE PROVIDED UNDER THE TERMS OF THE GNU FREE DOCUMENTATION LICENSE WITH THE FURTHER UNDERSTANDING THAT: " msgstr "" #: C/netspeed_applet.xml:48(firstname) #: C/netspeed_applet.xml:84(firstname) #: C/netspeed_applet.xml:104(firstname) msgid "Jörgen" msgstr "Jörgen" #: C/netspeed_applet.xml:49(surname) #: C/netspeed_applet.xml:85(surname) #: C/netspeed_applet.xml:105(surname) msgid "Scheibengruber" msgstr "Scheibengruber" #: C/netspeed_applet.xml:51(orgname) #: C/netspeed_applet.xml:60(orgname) msgid "GNOME Project" msgstr "Έργο Gnome" #: C/netspeed_applet.xml:53(email) #: C/netspeed_applet.xml:86(email) #: C/netspeed_applet.xml:106(email) msgid "mfcn@gmx.de" msgstr "mfcn@gmx.de" #: C/netspeed_applet.xml:57(firstname) #: C/netspeed_applet.xml:94(firstname) msgid "Pedro" msgstr "Pedro" #: C/netspeed_applet.xml:58(surname) #: C/netspeed_applet.xml:95(surname) msgid "Villavicencio Garrido" msgstr "Villavicencio Garrido" #: C/netspeed_applet.xml:62(email) #: C/netspeed_applet.xml:96(email) msgid "pvillavi@gnome.org" msgstr "pvillavi@gnome.org" #: C/netspeed_applet.xml:81(revnumber) msgid "1.2" msgstr "1.2" #: C/netspeed_applet.xml:82(date) msgid "2006" msgstr "2006" #: C/netspeed_applet.xml:91(revnumber) msgid "1.1" msgstr "1.1" #: C/netspeed_applet.xml:92(date) msgid "2005" msgstr "2005" #: C/netspeed_applet.xml:101(revnumber) msgid "1.0" msgstr "1.0" #: C/netspeed_applet.xml:112(releaseinfo) msgid "This manual describes version 0.12 of Netspeed Applet." msgstr "Αυτό το εγχειρίδιο περιγράφει την έκδοση 0.12 της μικροεφαρμογής Ταχύτητα δικτύου." #: C/netspeed_applet.xml:115(title) msgid "Feedback" msgstr "Ανάδραση" #: C/netspeed_applet.xml:116(para) msgid "To report a bug or make a suggestion regarding the Netspeed Applet applet or this manual, send a e-mail to Jörgen Scheibengruber." msgstr "Για να αναφέρετε ένα σφάλμα ή να κάνετε μια πρόταση σχετικά με τη μικροεφαρμογή Ταχύτητα δικτύου (netspeed) ή αυτό το εγχειρίδιο, στείλτε ένα ηλ. γράμμα στο σύνδεσμο Jörgen Scheibengruber." #: C/netspeed_applet.xml:122(primary) msgid "Netspeed Applet" msgstr "Μικροεφαρμογή Ταχύτητα δικτύου" #: C/netspeed_applet.xml:127(title) msgid "About Netspeed Applet" msgstr "Περί της μικροεφαρμογής Ταχύτητα δικτύου" #: C/netspeed_applet.xml:129(title) msgid "Netspeed" msgstr "Ταχύτητα δικτύου" #: C/netspeed_applet.xml:135(phrase) msgid "Netspeed." msgstr "Ταχύτητα δικτύου." #: C/netspeed_applet.xml:141(title) #: C/netspeed_applet.xml:147(phrase) msgid "Netspeed showing the sum in a 48px panel." msgstr "Η Ταχύτητα δικτύου εμφανίζει τη συνολική κυκλοφορία σε έναν πίνακα εφαρμογών των 48 εικονοστοιχείων." #: C/netspeed_applet.xml:152(para) msgid "Netspeed Applet displays the network traffic on a specified device like eth0, ppp0, plip0, etc. More over it provides information about the configuration of the network device." msgstr "Η Μικροεφαρμογή Ταχύτητα δικτύου εμφανίζει την κυκλοφορία του δικτύου σε μια καθορισμένη συσκευή όπως οι eth0, ppp0, plip0, κλπ. Επιπλέον, παρέχει πληροφορίες σχετικά με τις ρυθμίσεις της συσκευής δικτύου." #: C/netspeed_applet.xml:158(title) msgid "Netspeed Icons on Panel" msgstr "Εικονίδια της Ταχύτητας δικτύου στον πίνακα εφαρμογών" #: C/netspeed_applet.xml:165(para) msgid "Icon" msgstr "Εικονίδιο" #: C/netspeed_applet.xml:166(para) msgid "Description" msgstr "Περιγραφή" #: C/netspeed_applet.xml:175(phrase) msgid "Loopback" msgstr "Loopback" #: C/netspeed_applet.xml:178(para) msgid "The Loopback interface." msgstr "Η διεπαφή Loopback." #: C/netspeed_applet.xml:187(phrase) msgid "Ethernet" msgstr "Ethernet" #: C/netspeed_applet.xml:190(para) msgid "Ethernet connection." msgstr "Σύνδεση ethernet." #: C/netspeed_applet.xml:199(phrase) msgid "PPP" msgstr "PPP" #: C/netspeed_applet.xml:202(para) msgid "Point to Point Protocol connection." msgstr "Σύνδεση με πρωτόκολλο Point to Point." #: C/netspeed_applet.xml:211(phrase) msgid "Wireless" msgstr "Ασύρματη" #: C/netspeed_applet.xml:214(para) msgid "Wireless connection." msgstr "Ασύρματη σύνδεση." #: C/netspeed_applet.xml:223(phrase) msgid "PLIP" msgstr "PLIP" #: C/netspeed_applet.xml:226(para) msgid "Parallel Line Internet Protocol connection." msgstr "Σύνδεση στο δίκτυο με πρωτόκολλο παράλληλης γραμμής." #: C/netspeed_applet.xml:235(title) msgid "To Add Netspeed to a Panel" msgstr "Για να προσθέσετε την Ταχύτητα δικτύου σε ένα πίνακα εφαρμογών" #: C/netspeed_applet.xml:236(para) msgid "To add Netspeed Applet to a panel, right-click on the panel, then choose Add to PanelNetworkNetspeed Applet." msgstr "Για να προσθέσετε τη Μικροεφαρμογή Ταχύτητα δικτύου σε έναν πίνακα εφαρμογών, κάντε δεξί κλικ με το ποντίκι σας στον πίνακα εφαρμογών, ύστερα επιλέξτε Προσθήκη στον πίνακα εφαρμογώνΔιαδίκτυοΜικροεφαρμογή netspeed." #: C/netspeed_applet.xml:244(title) msgid "Settings" msgstr "Ρυθμίσεις" #: C/netspeed_applet.xml:246(title) msgid "Netspeed Applet Settings" msgstr "Ρυθμίσεις της μικροεφαρμογής Ταχύτητα δικτύου" #: C/netspeed_applet.xml:252(phrase) msgid "Netspeed Applet Settings." msgstr "Ρυθμίσεις της μικροεφαρμογής Ταχύτητα δικτύου" #: C/netspeed_applet.xml:257(para) msgid "In this dialog you can change the settings of Netspeed Applet:" msgstr "Σε αυτόν το διάλογο μπορείτε να αλλάξετε τις ρυθμίσεις της μικροεφαρμογής Ταχύτητα δικτύου:" #: C/netspeed_applet.xml:261(para) msgid "Network device: Choose the network device that the applet should monitor from the popdown list of the combobox. Usually all available devices are listed, however you can enter one yourself, too." msgstr "Συσκευή δικτύου: Επιλέξτε τη συσκευή δικτύου που η εφαρμογή θα παρακολουθεί από τη λίστα του κουτιού πολλαπλών επιλογών. Συνήθως όλες οι διαθέσιμες συσκευές είναι στη λίστα, παρόλα αυτά μπορείτε να προσθέσετε μια δική σας επίσης." #: C/netspeed_applet.xml:265(para) msgid "Update interval: Enter the time between two updates of the applet." msgstr "Ενημέρωση διαστήματος: Εισάγετε το χρόνο μεταξύ δύο ενημερώσεων της μικροεφαρμογής." #: C/netspeed_applet.xml:268(para) msgid "Label font size: Enter the size of the text displayed in the applet." msgstr "Μέγεθος γραμματοσειράς ετικετών: Εισάγετε το μέγεθος του κειμένου που θα εμφανίζεται στη μικροεφαρμογή." #: C/netspeed_applet.xml:271(para) msgid "Show sum instead of in and out: If you check this box then the applet will show the sum of the in and out rate. The applet will take only half of the space in the panel in this case." msgstr "Προβολή του συνόλου αντί για τα εισερχόμενα και τα εξερχόμενα: Αν κάνετε τικ σε αυτό το κουτί η μικροεφαρμογή θα εμφανίζει τη συνολική ταχύτητα των εισερχομένων και των εξερχομένων. Σε αυτήν την περίπτωση, η μικροεφαρμογή καταλαμβάνει μόνο το μισό του διαστήματος στον πίνακα εφαρμογών." #: C/netspeed_applet.xml:275(para) msgid "Show bits/s (b/s) instead of bytes/s (B/s): Check this if you want the applet to display bits per second instead of bytes/s." msgstr "Εμφάνιση με bit/s (b/s) αντί για byte/s (B/s): Διαλέξτε αυτήν την επιλογή αν θέλετε η μικροεφαρμογή να εμφανίζει bit ανά δευτερόλεπτο αντί για byte ανά δευτερόλεπτο." #: C/netspeed_applet.xml:279(para) msgid "Change icon according to the selected device: Usually the applet will show an icon representing the type of network device you monitor. So it will show a phone for Point to Point connections (ppp - modems, etc.), a network card for ethernet (eth), etc. When this is unchecked, the applet will always show the network card icon, no matter which device you monitor." msgstr "Αλλαγή εικονιδίου σύμφωνα με την επιλεγμένη συσκευή: Συνήθως η εφαρμογή θα εμφανίσει ένα εικονίδιο που θα αναπαριστά τον τύπο της συσκευής δικτύου που παρακολουθείτε. Με αυτόν τον τρόπο θα εμφανίσει ένα τηλέφωνο για συνδέσεις Point to Point (ppp - modems, κλπ.), μία κάρτα δικτύου για ethernet (eth), κλπ. Όταν δεν διαλέγετε την επιλογή, η μικροεφαρμογή θα εμφανίζει πάντα το εικονίδιο της κάρτας δικτύου, άσχετα ποια συσκευή παρακολουθείτε." #: C/netspeed_applet.xml:285(para) msgid "Always monitor a connected device, if possible: When your connection is down, Netspeed Applet look for a running one for monitoring." msgstr "Να παρακολουθείται πάντα η συνδεδεμένη συσκευή, αν είναι δυνατόν: Όταν η σύνδεσή σας είναι κάτω, η μικροεφαρμογή Ταχύτητα δικτύου ψάχνει για μια συσκευή που λειτουργεί." #: C/netspeed_applet.xml:291(title) #: C/netspeed_applet.xml:293(title) #: C/netspeed_applet.xml:299(phrase) msgid "The details dialog" msgstr "Ο διάλογος των λεπτομερειών" #: C/netspeed_applet.xml:304(para) msgid "This dialog shows you some useful information on the configuration of your network device." msgstr "Ο διάλογος σάς παρέχει μερικές πληροφορίες σχετικά με τις ρυθμίζει της συσκευής δικτύου σας." #: C/netspeed_applet.xml:309(para) msgid "Internet Address: The IP (Internet Protocol) address of the network device." msgstr "Διεύθυνση δικτύου: Η διεύθυνση IP (Internet Protocol) της συσκευής δικτύου." #: C/netspeed_applet.xml:312(para) msgid "Netmask: The netmask which depends on the size of your LAN (Local Area Network). A usual value is 255.255.255.0 (a class C network)." msgstr "Μάσκα δικτύου: Η μάσκα δικτύου (netmask) εξαρτάται από το μέγεθος του τοπικού σας δικτύου LAN (Local Area Network). Μία συνηθισμένη τιμή της είναι η 255.255.255.0 (μια κλάση C του δικτύου)." #: C/netspeed_applet.xml:316(para) msgid "Hardware Address: Often also referred to as the physical or MAC (Media Access Control) address. A worldwide unique identifier for your network card." msgstr "Διεύθυνση υλικού: Συχνά αναφέρεται ως η φυσική ή MAC (Media Access Control) διεύθυνση. Ένας μοναδικός στον κόσμο προσδιοριστής για την κάρτα δικτύου σας." #: C/netspeed_applet.xml:320(para) msgid "P-t-P Address: The internet address of the \"other side\" of your PPP (Point to Point Protocol) connection." msgstr "Διεύθυνση P-t-P: Η διεύθυνση δικτύου της \"άλλης πλευράς\" της σύνδεσής σας PPP (Point to Point Protocol)." #: C/netspeed_applet.xml:324(para) msgid "Bytes in: The amount of bytes that the network device has received since it has been connected to the network." msgstr "Εισερχόμενα byte: Ο αριθμός των byte που η συσκευή δικτύου έχει λάβει από τη στιγμή που συνδέθηκε με το δίκτυο." #: C/netspeed_applet.xml:328(para) msgid "Bytes out: The amout of bytes that the network device has sent since it has been connected to the network." msgstr "Εξερχόμενα byte: Το ποσό των byte που η συσκευή δικτύου έχει στείλει από τη στιγμή που συνδέθηκε με το δίκτυο." #. Put one translator per line, in the form of NAME , YEAR1, YEAR2. #: C/netspeed_applet.xml:0(None) msgid "translator-credits" msgstr "" "Ελληνική μεταφραστική ομάδα GNOME\n" " Γιάννης Κατσαμπίρης \n" " Σίμος Ξενιτέλλης \n" "\n" "Για περισσότερα δείτε http://www.gnome.gr/" netspeed_applet-0.16/AUTHORS0000644000175000017500000000041111402426203012573 00000000000000Authors: Jörgen Scheibengruber Dennis Cranston Pedro Villavicencio Garrido Benoît Dejean The icons are combined out of icons from: Jimmac http://jimmac.musichall.cz/ netspeed_applet-0.16/GNOME_NetspeedApplet.server.in.in0000644000175000017500000000236611402426203017642 00000000000000 netspeed_applet-0.16/COPYING0000644000175000017500000010451311402430115012563 00000000000000 GNU GENERAL PUBLIC LICENSE Version 3, 29 June 2007 Copyright (C) 2007 Free Software Foundation, Inc. Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The GNU General Public License is a free, copyleft license for software and other kinds of works. The licenses for most software and other practical works are designed to take away your freedom to share and change the works. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change all versions of a program--to make sure it remains free software for all its users. We, the Free Software Foundation, use the GNU General Public License for most of our software; it applies also to any other work released this way by its authors. You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for them if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs, and that you know you can do these things. To protect your rights, we need to prevent others from denying you these rights or asking you to surrender the rights. Therefore, you have certain responsibilities if you distribute copies of the software, or if you modify it: responsibilities to respect the freedom of others. For example, if you distribute copies of such a program, whether gratis or for a fee, you must pass on to the recipients the same freedoms that you received. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. Developers that use the GNU GPL protect your rights with two steps: (1) assert copyright on the software, and (2) offer you this License giving you legal permission to copy, distribute and/or modify it. For the developers' and authors' protection, the GPL clearly explains that there is no warranty for this free software. For both users' and authors' sake, the GPL requires that modified versions be marked as changed, so that their problems will not be attributed erroneously to authors of previous versions. Some devices are designed to deny users access to install or run modified versions of the software inside them, although the manufacturer can do so. This is fundamentally incompatible with the aim of protecting users' freedom to change the software. The systematic pattern of such abuse occurs in the area of products for individuals to use, which is precisely where it is most unacceptable. Therefore, we have designed this version of the GPL to prohibit the practice for those products. If such problems arise substantially in other domains, we stand ready to extend this provision to those domains in future versions of the GPL, as needed to protect the freedom of users. Finally, every program is threatened constantly by software patents. States should not allow patents to restrict development and use of software on general-purpose computers, but in those that do, we wish to avoid the special danger that patents applied to a free program could make it effectively proprietary. To prevent this, the GPL assures that patents cannot be used to render the program non-free. The precise terms and conditions for copying, distribution and modification follow. TERMS AND CONDITIONS 0. Definitions. "This License" refers to version 3 of the GNU General Public License. "Copyright" also means copyright-like laws that apply to other kinds of works, such as semiconductor masks. "The Program" refers to any copyrightable work licensed under this License. Each licensee is addressed as "you". "Licensees" and "recipients" may be individuals or organizations. To "modify" a work means to copy from or adapt all or part of the work in a fashion requiring copyright permission, other than the making of an exact copy. The resulting work is called a "modified version" of the earlier work or a work "based on" the earlier work. A "covered work" means either the unmodified Program or a work based on the Program. To "propagate" a work means to do anything with it that, without permission, would make you directly or secondarily liable for infringement under applicable copyright law, except executing it on a computer or modifying a private copy. Propagation includes copying, distribution (with or without modification), making available to the public, and in some countries other activities as well. To "convey" a work means any kind of propagation that enables other parties to make or receive copies. Mere interaction with a user through a computer network, with no transfer of a copy, is not conveying. An interactive user interface displays "Appropriate Legal Notices" to the extent that it includes a convenient and prominently visible feature that (1) displays an appropriate copyright notice, and (2) tells the user that there is no warranty for the work (except to the extent that warranties are provided), that licensees may convey the work under this License, and how to view a copy of this License. If the interface presents a list of user commands or options, such as a menu, a prominent item in the list meets this criterion. 1. Source Code. The "source code" for a work means the preferred form of the work for making modifications to it. "Object code" means any non-source form of a work. A "Standard Interface" means an interface that either is an official standard defined by a recognized standards body, or, in the case of interfaces specified for a particular programming language, one that is widely used among developers working in that language. The "System Libraries" of an executable work include anything, other than the work as a whole, that (a) is included in the normal form of packaging a Major Component, but which is not part of that Major Component, and (b) serves only to enable use of the work with that Major Component, or to implement a Standard Interface for which an implementation is available to the public in source code form. A "Major Component", in this context, means a major essential component (kernel, window system, and so on) of the specific operating system (if any) on which the executable work runs, or a compiler used to produce the work, or an object code interpreter used to run it. The "Corresponding Source" for a work in object code form means all the source code needed to generate, install, and (for an executable work) run the object code and to modify the work, including scripts to control those activities. However, it does not include the work's System Libraries, or general-purpose tools or generally available free programs which are used unmodified in performing those activities but which are not part of the work. For example, Corresponding Source includes interface definition files associated with source files for the work, and the source code for shared libraries and dynamically linked subprograms that the work is specifically designed to require, such as by intimate data communication or control flow between those subprograms and other parts of the work. The Corresponding Source need not include anything that users can regenerate automatically from other parts of the Corresponding Source. The Corresponding Source for a work in source code form is that same work. 2. Basic Permissions. All rights granted under this License are granted for the term of copyright on the Program, and are irrevocable provided the stated conditions are met. This License explicitly affirms your unlimited permission to run the unmodified Program. The output from running a covered work is covered by this License only if the output, given its content, constitutes a covered work. This License acknowledges your rights of fair use or other equivalent, as provided by copyright law. You may make, run and propagate covered works that you do not convey, without conditions so long as your license otherwise remains in force. You may convey covered works to others for the sole purpose of having them make modifications exclusively for you, or provide you with facilities for running those works, provided that you comply with the terms of this License in conveying all material for which you do not control copyright. Those thus making or running the covered works for you must do so exclusively on your behalf, under your direction and control, on terms that prohibit them from making any copies of your copyrighted material outside their relationship with you. Conveying under any other circumstances is permitted solely under the conditions stated below. Sublicensing is not allowed; section 10 makes it unnecessary. 3. Protecting Users' Legal Rights From Anti-Circumvention Law. No covered work shall be deemed part of an effective technological measure under any applicable law fulfilling obligations under article 11 of the WIPO copyright treaty adopted on 20 December 1996, or similar laws prohibiting or restricting circumvention of such measures. When you convey a covered work, you waive any legal power to forbid circumvention of technological measures to the extent such circumvention is effected by exercising rights under this License with respect to the covered work, and you disclaim any intention to limit operation or modification of the work as a means of enforcing, against the work's users, your or third parties' legal rights to forbid circumvention of technological measures. 4. Conveying Verbatim Copies. You may convey verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice; keep intact all notices stating that this License and any non-permissive terms added in accord with section 7 apply to the code; keep intact all notices of the absence of any warranty; and give all recipients a copy of this License along with the Program. You may charge any price or no price for each copy that you convey, and you may offer support or warranty protection for a fee. 5. Conveying Modified Source Versions. You may convey a work based on the Program, or the modifications to produce it from the Program, in the form of source code under the terms of section 4, provided that you also meet all of these conditions: a) The work must carry prominent notices stating that you modified it, and giving a relevant date. b) The work must carry prominent notices stating that it is released under this License and any conditions added under section 7. This requirement modifies the requirement in section 4 to "keep intact all notices". c) You must license the entire work, as a whole, under this License to anyone who comes into possession of a copy. This License will therefore apply, along with any applicable section 7 additional terms, to the whole of the work, and all its parts, regardless of how they are packaged. This License gives no permission to license the work in any other way, but it does not invalidate such permission if you have separately received it. d) If the work has interactive user interfaces, each must display Appropriate Legal Notices; however, if the Program has interactive interfaces that do not display Appropriate Legal Notices, your work need not make them do so. A compilation of a covered work with other separate and independent works, which are not by their nature extensions of the covered work, and which are not combined with it such as to form a larger program, in or on a volume of a storage or distribution medium, is called an "aggregate" if the compilation and its resulting copyright are not used to limit the access or legal rights of the compilation's users beyond what the individual works permit. Inclusion of a covered work in an aggregate does not cause this License to apply to the other parts of the aggregate. 6. Conveying Non-Source Forms. You may convey a covered work in object code form under the terms of sections 4 and 5, provided that you also convey the machine-readable Corresponding Source under the terms of this License, in one of these ways: a) Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied by the Corresponding Source fixed on a durable physical medium customarily used for software interchange. b) Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied by a written offer, valid for at least three years and valid for as long as you offer spare parts or customer support for that product model, to give anyone who possesses the object code either (1) a copy of the Corresponding Source for all the software in the product that is covered by this License, on a durable physical medium customarily used for software interchange, for a price no more than your reasonable cost of physically performing this conveying of source, or (2) access to copy the Corresponding Source from a network server at no charge. c) Convey individual copies of the object code with a copy of the written offer to provide the Corresponding Source. This alternative is allowed only occasionally and noncommercially, and only if you received the object code with such an offer, in accord with subsection 6b. d) Convey the object code by offering access from a designated place (gratis or for a charge), and offer equivalent access to the Corresponding Source in the same way through the same place at no further charge. You need not require recipients to copy the Corresponding Source along with the object code. If the place to copy the object code is a network server, the Corresponding Source may be on a different server (operated by you or a third party) that supports equivalent copying facilities, provided you maintain clear directions next to the object code saying where to find the Corresponding Source. Regardless of what server hosts the Corresponding Source, you remain obligated to ensure that it is available for as long as needed to satisfy these requirements. e) Convey the object code using peer-to-peer transmission, provided you inform other peers where the object code and Corresponding Source of the work are being offered to the general public at no charge under subsection 6d. A separable portion of the object code, whose source code is excluded from the Corresponding Source as a System Library, need not be included in conveying the object code work. A "User Product" is either (1) a "consumer product", which means any tangible personal property which is normally used for personal, family, or household purposes, or (2) anything designed or sold for incorporation into a dwelling. In determining whether a product is a consumer product, doubtful cases shall be resolved in favor of coverage. For a particular product received by a particular user, "normally used" refers to a typical or common use of that class of product, regardless of the status of the particular user or of the way in which the particular user actually uses, or expects or is expected to use, the product. A product is a consumer product regardless of whether the product has substantial commercial, industrial or non-consumer uses, unless such uses represent the only significant mode of use of the product. "Installation Information" for a User Product means any methods, procedures, authorization keys, or other information required to install and execute modified versions of a covered work in that User Product from a modified version of its Corresponding Source. The information must suffice to ensure that the continued functioning of the modified object code is in no case prevented or interfered with solely because modification has been made. If you convey an object code work under this section in, or with, or specifically for use in, a User Product, and the conveying occurs as part of a transaction in which the right of possession and use of the User Product is transferred to the recipient in perpetuity or for a fixed term (regardless of how the transaction is characterized), the Corresponding Source conveyed under this section must be accompanied by the Installation Information. But this requirement does not apply if neither you nor any third party retains the ability to install modified object code on the User Product (for example, the work has been installed in ROM). The requirement to provide Installation Information does not include a requirement to continue to provide support service, warranty, or updates for a work that has been modified or installed by the recipient, or for the User Product in which it has been modified or installed. Access to a network may be denied when the modification itself materially and adversely affects the operation of the network or violates the rules and protocols for communication across the network. Corresponding Source conveyed, and Installation Information provided, in accord with this section must be in a format that is publicly documented (and with an implementation available to the public in source code form), and must require no special password or key for unpacking, reading or copying. 7. Additional Terms. "Additional permissions" are terms that supplement the terms of this License by making exceptions from one or more of its conditions. Additional permissions that are applicable to the entire Program shall be treated as though they were included in this License, to the extent that they are valid under applicable law. If additional permissions apply only to part of the Program, that part may be used separately under those permissions, but the entire Program remains governed by this License without regard to the additional permissions. When you convey a copy of a covered work, you may at your option remove any additional permissions from that copy, or from any part of it. (Additional permissions may be written to require their own removal in certain cases when you modify the work.) You may place additional permissions on material, added by you to a covered work, for which you have or can give appropriate copyright permission. Notwithstanding any other provision of this License, for material you add to a covered work, you may (if authorized by the copyright holders of that material) supplement the terms of this License with terms: a) Disclaiming warranty or limiting liability differently from the terms of sections 15 and 16 of this License; or b) Requiring preservation of specified reasonable legal notices or author attributions in that material or in the Appropriate Legal Notices displayed by works containing it; or c) Prohibiting misrepresentation of the origin of that material, or requiring that modified versions of such material be marked in reasonable ways as different from the original version; or d) Limiting the use for publicity purposes of names of licensors or authors of the material; or e) Declining to grant rights under trademark law for use of some trade names, trademarks, or service marks; or f) Requiring indemnification of licensors and authors of that material by anyone who conveys the material (or modified versions of it) with contractual assumptions of liability to the recipient, for any liability that these contractual assumptions directly impose on those licensors and authors. All other non-permissive additional terms are considered "further restrictions" within the meaning of section 10. If the Program as you received it, or any part of it, contains a notice stating that it is governed by this License along with a term that is a further restriction, you may remove that term. If a license document contains a further restriction but permits relicensing or conveying under this License, you may add to a covered work material governed by the terms of that license document, provided that the further restriction does not survive such relicensing or conveying. If you add terms to a covered work in accord with this section, you must place, in the relevant source files, a statement of the additional terms that apply to those files, or a notice indicating where to find the applicable terms. Additional terms, permissive or non-permissive, may be stated in the form of a separately written license, or stated as exceptions; the above requirements apply either way. 8. Termination. You may not propagate or modify a covered work except as expressly provided under this License. Any attempt otherwise to propagate or modify it is void, and will automatically terminate your rights under this License (including any patent licenses granted under the third paragraph of section 11). However, if you cease all violation of this License, then your license from a particular copyright holder is reinstated (a) provisionally, unless and until the copyright holder explicitly and finally terminates your license, and (b) permanently, if the copyright holder fails to notify you of the violation by some reasonable means prior to 60 days after the cessation. Moreover, your license from a particular copyright holder is reinstated permanently if the copyright holder notifies you of the violation by some reasonable means, this is the first time you have received notice of violation of this License (for any work) from that copyright holder, and you cure the violation prior to 30 days after your receipt of the notice. Termination of your rights under this section does not terminate the licenses of parties who have received copies or rights from you under this License. If your rights have been terminated and not permanently reinstated, you do not qualify to receive new licenses for the same material under section 10. 9. Acceptance Not Required for Having Copies. You are not required to accept this License in order to receive or run a copy of the Program. Ancillary propagation of a covered work occurring solely as a consequence of using peer-to-peer transmission to receive a copy likewise does not require acceptance. However, nothing other than this License grants you permission to propagate or modify any covered work. These actions infringe copyright if you do not accept this License. Therefore, by modifying or propagating a covered work, you indicate your acceptance of this License to do so. 10. Automatic Licensing of Downstream Recipients. Each time you convey a covered work, the recipient automatically receives a license from the original licensors, to run, modify and propagate that work, subject to this License. You are not responsible for enforcing compliance by third parties with this License. An "entity transaction" is a transaction transferring control of an organization, or substantially all assets of one, or subdividing an organization, or merging organizations. If propagation of a covered work results from an entity transaction, each party to that transaction who receives a copy of the work also receives whatever licenses to the work the party's predecessor in interest had or could give under the previous paragraph, plus a right to possession of the Corresponding Source of the work from the predecessor in interest, if the predecessor has it or can get it with reasonable efforts. You may not impose any further restrictions on the exercise of the rights granted or affirmed under this License. For example, you may not impose a license fee, royalty, or other charge for exercise of rights granted under this License, and you may not initiate litigation (including a cross-claim or counterclaim in a lawsuit) alleging that any patent claim is infringed by making, using, selling, offering for sale, or importing the Program or any portion of it. 11. Patents. A "contributor" is a copyright holder who authorizes use under this License of the Program or a work on which the Program is based. The work thus licensed is called the contributor's "contributor version". A contributor's "essential patent claims" are all patent claims owned or controlled by the contributor, whether already acquired or hereafter acquired, that would be infringed by some manner, permitted by this License, of making, using, or selling its contributor version, but do not include claims that would be infringed only as a consequence of further modification of the contributor version. For purposes of this definition, "control" includes the right to grant patent sublicenses in a manner consistent with the requirements of this License. Each contributor grants you a non-exclusive, worldwide, royalty-free patent license under the contributor's essential patent claims, to make, use, sell, offer for sale, import and otherwise run, modify and propagate the contents of its contributor version. In the following three paragraphs, a "patent license" is any express agreement or commitment, however denominated, not to enforce a patent (such as an express permission to practice a patent or covenant not to sue for patent infringement). To "grant" such a patent license to a party means to make such an agreement or commitment not to enforce a patent against the party. If you convey a covered work, knowingly relying on a patent license, and the Corresponding Source of the work is not available for anyone to copy, free of charge and under the terms of this License, through a publicly available network server or other readily accessible means, then you must either (1) cause the Corresponding Source to be so available, or (2) arrange to deprive yourself of the benefit of the patent license for this particular work, or (3) arrange, in a manner consistent with the requirements of this License, to extend the patent license to downstream recipients. "Knowingly relying" means you have actual knowledge that, but for the patent license, your conveying the covered work in a country, or your recipient's use of the covered work in a country, would infringe one or more identifiable patents in that country that you have reason to believe are valid. If, pursuant to or in connection with a single transaction or arrangement, you convey, or propagate by procuring conveyance of, a covered work, and grant a patent license to some of the parties receiving the covered work authorizing them to use, propagate, modify or convey a specific copy of the covered work, then the patent license you grant is automatically extended to all recipients of the covered work and works based on it. A patent license is "discriminatory" if it does not include within the scope of its coverage, prohibits the exercise of, or is conditioned on the non-exercise of one or more of the rights that are specifically granted under this License. You may not convey a covered work if you are a party to an arrangement with a third party that is in the business of distributing software, under which you make payment to the third party based on the extent of your activity of conveying the work, and under which the third party grants, to any of the parties who would receive the covered work from you, a discriminatory patent license (a) in connection with copies of the covered work conveyed by you (or copies made from those copies), or (b) primarily for and in connection with specific products or compilations that contain the covered work, unless you entered into that arrangement, or that patent license was granted, prior to 28 March 2007. Nothing in this License shall be construed as excluding or limiting any implied license or other defenses to infringement that may otherwise be available to you under applicable patent law. 12. No Surrender of Others' Freedom. If conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot convey a covered work so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not convey it at all. For example, if you agree to terms that obligate you to collect a royalty for further conveying from those to whom you convey the Program, the only way you could satisfy both those terms and this License would be to refrain entirely from conveying the Program. 13. Use with the GNU Affero General Public License. Notwithstanding any other provision of this License, you have permission to link or combine any covered work with a work licensed under version 3 of the GNU Affero General Public License into a single combined work, and to convey the resulting work. The terms of this License will continue to apply to the part which is the covered work, but the special requirements of the GNU Affero General Public License, section 13, concerning interaction through a network will apply to the combination as such. 14. Revised Versions of this License. The Free Software Foundation may publish revised and/or new versions of the GNU General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies that a certain numbered version of the GNU General Public License "or any later version" applies to it, you have the option of following the terms and conditions either of that numbered version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of the GNU General Public License, you may choose any version ever published by the Free Software Foundation. If the Program specifies that a proxy can decide which future versions of the GNU General Public License can be used, that proxy's public statement of acceptance of a version permanently authorizes you to choose that version for the Program. Later license versions may give you additional or different permissions. However, no additional obligations are imposed on any author or copyright holder as a result of your choosing to follow a later version. 15. Disclaimer of Warranty. THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 16. Limitation of Liability. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 17. Interpretation of Sections 15 and 16. If the disclaimer of warranty and limitation of liability provided above cannot be given local legal effect according to their terms, reviewing courts shall apply local law that most closely approximates an absolute waiver of all civil liability in connection with the Program, unless a warranty or assumption of liability accompanies a copy of the Program in return for a fee. END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively state the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found. Copyright (C) This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . Also add information on how to contact you by electronic and paper mail. If the program does terminal interaction, make it output a short notice like this when it starts in an interactive mode: Copyright (C) This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'. This is free software, and you are welcome to redistribute it under certain conditions; type `show c' for details. The hypothetical commands `show w' and `show c' should show the appropriate parts of the General Public License. Of course, your program's commands might be different; for a GUI interface, you would use an "about box". You should also get your employer (if you work as a programmer) or school, if any, to sign a "copyright disclaimer" for the program, if necessary. For more information on this, and how to apply and follow the GNU GPL, see . The GNU General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Lesser General Public License instead of this License. But first, please read . netspeed_applet-0.16/README0000644000175000017500000000016111402426203012405 00000000000000Enjoy this little applet :-) If you find bugs or have feature requests feel free to mail to mfcn@gmx.de Jörgennetspeed_applet-0.16/ChangeLog0000644000175000017500000000001411402455350013301 00000000000000See git log netspeed_applet-0.16/aclocal.m40000644000175000017500000015740411402461235013406 00000000000000# generated automatically by aclocal 1.11.1 -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, # 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.65],, [m4_warning([this file was generated for autoconf 2.65. You have another version of autoconf. It may work, but is not guaranteed to. If you have problems, you may need to regenerate the build system entirely. To do so, use the procedure documented by the package, typically `autoreconf'.])]) # Copyright (C) 1995-2002 Free Software Foundation, Inc. # Copyright (C) 2001-2003,2004 Red Hat, Inc. # # This file is free software, distributed under the terms of the GNU # General Public License. As a special exception to the GNU General # Public License, this file may be distributed as part of a program # that contains a configuration script generated by Autoconf, under # the same distribution terms as the rest of that program. # # This file can be copied and used freely without restrictions. It can # be used in projects which are not available under the GNU Public License # but which still want to provide support for the GNU gettext functionality. # # Macro to add for using GNU gettext. # Ulrich Drepper , 1995, 1996 # # Modified to never use included libintl. # Owen Taylor , 12/15/1998 # # Major rework to remove unused code # Owen Taylor , 12/11/2002 # # Added better handling of ALL_LINGUAS from GNU gettext version # written by Bruno Haible, Owen Taylor 5/30/3002 # # Modified to require ngettext # Matthias Clasen 08/06/2004 # # We need this here as well, since someone might use autoconf-2.5x # to configure GLib then an older version to configure a package # using AM_GLIB_GNU_GETTEXT AC_PREREQ(2.53) dnl dnl We go to great lengths to make sure that aclocal won't dnl try to pull in the installed version of these macros dnl when running aclocal in the glib directory. dnl m4_copy([AC_DEFUN],[glib_DEFUN]) m4_copy([AC_REQUIRE],[glib_REQUIRE]) dnl dnl At the end, if we're not within glib, we'll define the public dnl definitions in terms of our private definitions. dnl # GLIB_LC_MESSAGES #-------------------- glib_DEFUN([GLIB_LC_MESSAGES], [AC_CHECK_HEADERS([locale.h]) if test $ac_cv_header_locale_h = yes; then AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES, [AC_TRY_LINK([#include ], [return LC_MESSAGES], am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)]) if test $am_cv_val_LC_MESSAGES = yes; then AC_DEFINE(HAVE_LC_MESSAGES, 1, [Define if your file defines LC_MESSAGES.]) fi fi]) # GLIB_PATH_PROG_WITH_TEST #---------------------------- dnl GLIB_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR, dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]]) glib_DEFUN([GLIB_PATH_PROG_WITH_TEST], [# Extract the first word of "$2", so it can be a program name with args. set dummy $2; ac_word=[$]2 AC_MSG_CHECKING([for $ac_word]) AC_CACHE_VAL(ac_cv_path_$1, [case "[$]$1" in /*) ac_cv_path_$1="[$]$1" # Let the user override the test with a path. ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" for ac_dir in ifelse([$5], , $PATH, [$5]); do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then if [$3]; then ac_cv_path_$1="$ac_dir/$ac_word" break fi fi done IFS="$ac_save_ifs" dnl If no 4th arg is given, leave the cache variable unset, dnl so AC_PATH_PROGS will keep looking. ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4" ])dnl ;; esac])dnl $1="$ac_cv_path_$1" if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then AC_MSG_RESULT([$]$1) else AC_MSG_RESULT(no) fi AC_SUBST($1)dnl ]) # GLIB_WITH_NLS #----------------- glib_DEFUN([GLIB_WITH_NLS], dnl NLS is obligatory [USE_NLS=yes AC_SUBST(USE_NLS) gt_cv_have_gettext=no CATOBJEXT=NONE XGETTEXT=: INTLLIBS= AC_CHECK_HEADER(libintl.h, [gt_cv_func_dgettext_libintl="no" libintl_extra_libs="" # # First check in libc # AC_CACHE_CHECK([for ngettext in libc], gt_cv_func_ngettext_libc, [AC_TRY_LINK([ #include ], [return !ngettext ("","", 1)], gt_cv_func_ngettext_libc=yes, gt_cv_func_ngettext_libc=no) ]) if test "$gt_cv_func_ngettext_libc" = "yes" ; then AC_CACHE_CHECK([for dgettext in libc], gt_cv_func_dgettext_libc, [AC_TRY_LINK([ #include ], [return !dgettext ("","")], gt_cv_func_dgettext_libc=yes, gt_cv_func_dgettext_libc=no) ]) fi if test "$gt_cv_func_ngettext_libc" = "yes" ; then AC_CHECK_FUNCS(bind_textdomain_codeset) fi # # If we don't have everything we want, check in libintl # if test "$gt_cv_func_dgettext_libc" != "yes" \ || test "$gt_cv_func_ngettext_libc" != "yes" \ || test "$ac_cv_func_bind_textdomain_codeset" != "yes" ; then AC_CHECK_LIB(intl, bindtextdomain, [AC_CHECK_LIB(intl, ngettext, [AC_CHECK_LIB(intl, dgettext, gt_cv_func_dgettext_libintl=yes)])]) if test "$gt_cv_func_dgettext_libintl" != "yes" ; then AC_MSG_CHECKING([if -liconv is needed to use gettext]) AC_MSG_RESULT([]) AC_CHECK_LIB(intl, ngettext, [AC_CHECK_LIB(intl, dcgettext, [gt_cv_func_dgettext_libintl=yes libintl_extra_libs=-liconv], :,-liconv)], :,-liconv) fi # # If we found libintl, then check in it for bind_textdomain_codeset(); # we'll prefer libc if neither have bind_textdomain_codeset(), # and both have dgettext and ngettext # if test "$gt_cv_func_dgettext_libintl" = "yes" ; then glib_save_LIBS="$LIBS" LIBS="$LIBS -lintl $libintl_extra_libs" unset ac_cv_func_bind_textdomain_codeset AC_CHECK_FUNCS(bind_textdomain_codeset) LIBS="$glib_save_LIBS" if test "$ac_cv_func_bind_textdomain_codeset" = "yes" ; then gt_cv_func_dgettext_libc=no else if test "$gt_cv_func_dgettext_libc" = "yes" \ && test "$gt_cv_func_ngettext_libc" = "yes"; then gt_cv_func_dgettext_libintl=no fi fi fi fi if test "$gt_cv_func_dgettext_libc" = "yes" \ || test "$gt_cv_func_dgettext_libintl" = "yes"; then gt_cv_have_gettext=yes fi if test "$gt_cv_func_dgettext_libintl" = "yes"; then INTLLIBS="-lintl $libintl_extra_libs" fi if test "$gt_cv_have_gettext" = "yes"; then AC_DEFINE(HAVE_GETTEXT,1, [Define if the GNU gettext() function is already present or preinstalled.]) GLIB_PATH_PROG_WITH_TEST(MSGFMT, msgfmt, [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl if test "$MSGFMT" != "no"; then glib_save_LIBS="$LIBS" LIBS="$LIBS $INTLLIBS" AC_CHECK_FUNCS(dcgettext) MSGFMT_OPTS= AC_MSG_CHECKING([if msgfmt accepts -c]) GLIB_RUN_PROG([$MSGFMT -c -o /dev/null],[ msgid "" msgstr "" "Content-Type: text/plain; charset=UTF-8\n" "Project-Id-Version: test 1.0\n" "PO-Revision-Date: 2007-02-15 12:01+0100\n" "Last-Translator: test \n" "Language-Team: C \n" "MIME-Version: 1.0\n" "Content-Transfer-Encoding: 8bit\n" ], [MSGFMT_OPTS=-c; AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no])]) AC_SUBST(MSGFMT_OPTS) AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) GLIB_PATH_PROG_WITH_TEST(XGETTEXT, xgettext, [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :) AC_TRY_LINK(, [extern int _nl_msg_cat_cntr; return _nl_msg_cat_cntr], [CATOBJEXT=.gmo DATADIRNAME=share], [case $host in *-*-solaris*) dnl On Solaris, if bind_textdomain_codeset is in libc, dnl GNU format message catalog is always supported, dnl since both are added to the libc all together. dnl Hence, we'd like to go with DATADIRNAME=share and dnl and CATOBJEXT=.gmo in this case. AC_CHECK_FUNC(bind_textdomain_codeset, [CATOBJEXT=.gmo DATADIRNAME=share], [CATOBJEXT=.mo DATADIRNAME=lib]) ;; *) CATOBJEXT=.mo DATADIRNAME=lib ;; esac]) LIBS="$glib_save_LIBS" INSTOBJEXT=.mo else gt_cv_have_gettext=no fi fi ]) if test "$gt_cv_have_gettext" = "yes" ; then AC_DEFINE(ENABLE_NLS, 1, [always defined to indicate that i18n is enabled]) fi dnl Test whether we really found GNU xgettext. if test "$XGETTEXT" != ":"; then dnl If it is not GNU xgettext we define it as : so that the dnl Makefiles still can work. if $XGETTEXT --omit-header /dev/null 2> /dev/null; then : ; else AC_MSG_RESULT( [found xgettext program is not GNU xgettext; ignore it]) XGETTEXT=":" fi fi # We need to process the po/ directory. POSUB=po AC_OUTPUT_COMMANDS( [case "$CONFIG_FILES" in *po/Makefile.in*) sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile esac]) dnl These rules are solely for the distribution goal. While doing this dnl we only have to keep exactly one list of the available catalogs dnl in configure.in. for lang in $ALL_LINGUAS; do GMOFILES="$GMOFILES $lang.gmo" POFILES="$POFILES $lang.po" done dnl Make all variables we use known to autoconf. AC_SUBST(CATALOGS) AC_SUBST(CATOBJEXT) AC_SUBST(DATADIRNAME) AC_SUBST(GMOFILES) AC_SUBST(INSTOBJEXT) AC_SUBST(INTLLIBS) AC_SUBST(PO_IN_DATADIR_TRUE) AC_SUBST(PO_IN_DATADIR_FALSE) AC_SUBST(POFILES) AC_SUBST(POSUB) ]) # AM_GLIB_GNU_GETTEXT # ------------------- # Do checks necessary for use of gettext. If a suitable implementation # of gettext is found in either in libintl or in the C library, # it will set INTLLIBS to the libraries needed for use of gettext # and AC_DEFINE() HAVE_GETTEXT and ENABLE_NLS. (The shell variable # gt_cv_have_gettext will be set to "yes".) It will also call AC_SUBST() # on various variables needed by the Makefile.in.in installed by # glib-gettextize. dnl glib_DEFUN([GLIB_GNU_GETTEXT], [AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_HEADER_STDC])dnl GLIB_LC_MESSAGES GLIB_WITH_NLS if test "$gt_cv_have_gettext" = "yes"; then if test "x$ALL_LINGUAS" = "x"; then LINGUAS= else AC_MSG_CHECKING(for catalogs to be installed) NEW_LINGUAS= for presentlang in $ALL_LINGUAS; do useit=no if test "%UNSET%" != "${LINGUAS-%UNSET%}"; then desiredlanguages="$LINGUAS" else desiredlanguages="$ALL_LINGUAS" fi for desiredlang in $desiredlanguages; do # Use the presentlang catalog if desiredlang is # a. equal to presentlang, or # b. a variant of presentlang (because in this case, # presentlang can be used as a fallback for messages # which are not translated in the desiredlang catalog). case "$desiredlang" in "$presentlang"*) useit=yes;; esac done if test $useit = yes; then NEW_LINGUAS="$NEW_LINGUAS $presentlang" fi done LINGUAS=$NEW_LINGUAS AC_MSG_RESULT($LINGUAS) fi dnl Construct list of names of catalog files to be constructed. if test -n "$LINGUAS"; then for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done fi fi dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly dnl find the mkinstalldirs script in another subdir but ($top_srcdir). dnl Try to locate is. MKINSTALLDIRS= if test -n "$ac_aux_dir"; then MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs" fi if test -z "$MKINSTALLDIRS"; then MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs" fi AC_SUBST(MKINSTALLDIRS) dnl Generate list of files to be processed by xgettext which will dnl be included in po/Makefile. test -d po || mkdir po if test "x$srcdir" != "x."; then if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then posrcprefix="$srcdir/" else posrcprefix="../$srcdir/" fi else posrcprefix="../" fi rm -f po/POTFILES sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \ < $srcdir/po/POTFILES.in > po/POTFILES ]) # AM_GLIB_DEFINE_LOCALEDIR(VARIABLE) # ------------------------------- # Define VARIABLE to the location where catalog files will # be installed by po/Makefile. glib_DEFUN([GLIB_DEFINE_LOCALEDIR], [glib_REQUIRE([GLIB_GNU_GETTEXT])dnl glib_save_prefix="$prefix" glib_save_exec_prefix="$exec_prefix" glib_save_datarootdir="$datarootdir" test "x$prefix" = xNONE && prefix=$ac_default_prefix test "x$exec_prefix" = xNONE && exec_prefix=$prefix datarootdir=`eval echo "${datarootdir}"` if test "x$CATOBJEXT" = "x.mo" ; then localedir=`eval echo "${libdir}/locale"` else localedir=`eval echo "${datadir}/locale"` fi prefix="$glib_save_prefix" exec_prefix="$glib_save_exec_prefix" datarootdir="$glib_save_datarootdir" AC_DEFINE_UNQUOTED($1, "$localedir", [Define the location where the catalogs will be installed]) ]) dnl dnl Now the definitions that aclocal will find dnl ifdef(glib_configure_in,[],[ AC_DEFUN([AM_GLIB_GNU_GETTEXT],[GLIB_GNU_GETTEXT($@)]) AC_DEFUN([AM_GLIB_DEFINE_LOCALEDIR],[GLIB_DEFINE_LOCALEDIR($@)]) ])dnl # GLIB_RUN_PROG(PROGRAM, TEST-FILE, [ACTION-IF-PASS], [ACTION-IF-FAIL]) # # Create a temporary file with TEST-FILE as its contents and pass the # file name to PROGRAM. Perform ACTION-IF-PASS if PROGRAM exits with # 0 and perform ACTION-IF-FAIL for any other exit status. AC_DEFUN([GLIB_RUN_PROG], [cat >conftest.foo <<_ACEOF $2 _ACEOF if AC_RUN_LOG([$1 conftest.foo]); then m4_ifval([$3], [$3], [:]) m4_ifvaln([$4], [else $4])dnl echo "$as_me: failed input was:" >&AS_MESSAGE_LOG_FD sed 's/^/| /' conftest.foo >&AS_MESSAGE_LOG_FD fi]) # nls.m4 serial 3 (gettext-0.15) dnl Copyright (C) 1995-2003, 2005-2006 Free Software Foundation, Inc. dnl This file is free software; the Free Software Foundation dnl gives unlimited permission to copy and/or distribute it, dnl with or without modifications, as long as this notice is preserved. dnl dnl This file can can be used in projects which are not available under dnl the GNU General Public License or the GNU Library General Public dnl License but which still want to provide support for the GNU gettext dnl functionality. dnl Please note that the actual code of the GNU gettext library is covered dnl by the GNU Library General Public License, and the rest of the GNU dnl gettext package package is covered by the GNU General Public License. dnl They are *not* in the public domain. dnl Authors: dnl Ulrich Drepper , 1995-2000. dnl Bruno Haible , 2000-2003. AC_PREREQ(2.50) AC_DEFUN([AM_NLS], [ AC_MSG_CHECKING([whether NLS is requested]) dnl Default is enabled NLS AC_ARG_ENABLE(nls, [ --disable-nls do not use Native Language Support], USE_NLS=$enableval, USE_NLS=yes) AC_MSG_RESULT($USE_NLS) AC_SUBST(USE_NLS) ]) # pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*- # # Copyright © 2004 Scott James Remnant . # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # PKG_PROG_PKG_CONFIG([MIN-VERSION]) # ---------------------------------- AC_DEFUN([PKG_PROG_PKG_CONFIG], [m4_pattern_forbid([^_?PKG_[A-Z_]+$]) m4_pattern_allow([^PKG_CONFIG(_PATH)?$]) AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])dnl if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then AC_PATH_TOOL([PKG_CONFIG], [pkg-config]) fi if test -n "$PKG_CONFIG"; then _pkg_min_version=m4_default([$1], [0.9.0]) AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version]) if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) PKG_CONFIG="" fi fi[]dnl ])# PKG_PROG_PKG_CONFIG # PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) # # Check to see whether a particular set of modules exists. Similar # to PKG_CHECK_MODULES(), but does not set variables or print errors. # # # Similar to PKG_CHECK_MODULES, make sure that the first instance of # this or PKG_CHECK_MODULES is called, or make sure to call # PKG_CHECK_EXISTS manually # -------------------------------------------------------------- AC_DEFUN([PKG_CHECK_EXISTS], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl if test -n "$PKG_CONFIG" && \ AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then m4_ifval([$2], [$2], [:]) m4_ifvaln([$3], [else $3])dnl fi]) # _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES]) # --------------------------------------------- m4_define([_PKG_CONFIG], [if test -n "$PKG_CONFIG"; then if test -n "$$1"; then pkg_cv_[]$1="$$1" else PKG_CHECK_EXISTS([$3], [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`], [pkg_failed=yes]) fi else pkg_failed=untried fi[]dnl ])# _PKG_CONFIG # _PKG_SHORT_ERRORS_SUPPORTED # ----------------------------- AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED], [AC_REQUIRE([PKG_PROG_PKG_CONFIG]) if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then _pkg_short_errors_supported=yes else _pkg_short_errors_supported=no fi[]dnl ])# _PKG_SHORT_ERRORS_SUPPORTED # PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], # [ACTION-IF-NOT-FOUND]) # # # Note that if there is a possibility the first call to # PKG_CHECK_MODULES might not happen, you should be sure to include an # explicit call to PKG_PROG_PKG_CONFIG in your configure.ac # # # -------------------------------------------------------------- AC_DEFUN([PKG_CHECK_MODULES], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl pkg_failed=no AC_MSG_CHECKING([for $1]) _PKG_CONFIG([$1][_CFLAGS], [cflags], [$2]) _PKG_CONFIG([$1][_LIBS], [libs], [$2]) m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS and $1[]_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details.]) if test $pkg_failed = yes; then _PKG_SHORT_ERRORS_SUPPORTED if test $_pkg_short_errors_supported = yes; then $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "$2"` else $1[]_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$2"` fi # Put the nasty error message in config.log where it belongs echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD ifelse([$4], , [AC_MSG_ERROR(dnl [Package requirements ($2) were not met: $$1_PKG_ERRORS Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. _PKG_TEXT ])], [AC_MSG_RESULT([no]) $4]) elif test $pkg_failed = untried; then ifelse([$4], , [AC_MSG_FAILURE(dnl [The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. _PKG_TEXT To get pkg-config, see .])], [$4]) else $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS $1[]_LIBS=$pkg_cv_[]$1[]_LIBS AC_MSG_RESULT([yes]) ifelse([$3], , :, [$3]) fi[]dnl ])# PKG_CHECK_MODULES # Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_AUTOMAKE_VERSION(VERSION) # ---------------------------- # Automake X.Y traces this macro to ensure aclocal.m4 has been # generated from the m4 files accompanying Automake X.Y. # (This private macro should not be called outside this file.) AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version='1.11' dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to dnl require some minimum version. Point them to the right macro. m4_if([$1], [1.11.1], [], [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl ]) # _AM_AUTOCONF_VERSION(VERSION) # ----------------------------- # aclocal traces this macro to find the Autoconf version. # This is a private macro too. Using m4_define simplifies # the logic in aclocal, which can simply ignore this definition. m4_define([_AM_AUTOCONF_VERSION], []) # AM_SET_CURRENT_AUTOMAKE_VERSION # ------------------------------- # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. # This function is AC_REQUIREd by AM_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], [AM_AUTOMAKE_VERSION([1.11.1])dnl m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl _AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) # AM_AUX_DIR_EXPAND -*- Autoconf -*- # Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets # $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to # `$srcdir', `$srcdir/..', or `$srcdir/../..'. # # Of course, Automake must honor this variable whenever it calls a # tool from the auxiliary directory. The problem is that $srcdir (and # therefore $ac_aux_dir as well) can be either absolute or relative, # depending on how configure is run. This is pretty annoying, since # it makes $ac_aux_dir quite unusable in subdirectories: in the top # source directory, any form will work fine, but in subdirectories a # relative path needs to be adjusted first. # # $ac_aux_dir/missing # fails when called from a subdirectory if $ac_aux_dir is relative # $top_srcdir/$ac_aux_dir/missing # fails if $ac_aux_dir is absolute, # fails when called from a subdirectory in a VPATH build with # a relative $ac_aux_dir # # The reason of the latter failure is that $top_srcdir and $ac_aux_dir # are both prefixed by $srcdir. In an in-source build this is usually # harmless because $srcdir is `.', but things will broke when you # start a VPATH build or use an absolute $srcdir. # # So we could use something similar to $top_srcdir/$ac_aux_dir/missing, # iff we strip the leading $srcdir from $ac_aux_dir. That would be: # am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` # and then we would define $MISSING as # MISSING="\${SHELL} $am_aux_dir/missing" # This will work as long as MISSING is not called from configure, because # unfortunately $(top_srcdir) has no meaning in configure. # However there are other variables, like CC, which are often used in # configure, and could therefore not use this "fixed" $ac_aux_dir. # # Another solution, used here, is to always expand $ac_aux_dir to an # absolute PATH. The drawback is that using absolute paths prevent a # configured tree to be moved without reconfiguration. AC_DEFUN([AM_AUX_DIR_EXPAND], [dnl Rely on autoconf to set up CDPATH properly. AC_PREREQ([2.50])dnl # expand $ac_aux_dir to an absolute path am_aux_dir=`cd $ac_aux_dir && pwd` ]) # AM_CONDITIONAL -*- Autoconf -*- # Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 9 # AM_CONDITIONAL(NAME, SHELL-CONDITION) # ------------------------------------- # Define a conditional. AC_DEFUN([AM_CONDITIONAL], [AC_PREREQ(2.52)dnl ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl AC_SUBST([$1_TRUE])dnl AC_SUBST([$1_FALSE])dnl _AM_SUBST_NOTMAKE([$1_TRUE])dnl _AM_SUBST_NOTMAKE([$1_FALSE])dnl m4_define([_AM_COND_VALUE_$1], [$2])dnl if $2; then $1_TRUE= $1_FALSE='#' else $1_TRUE='#' $1_FALSE= fi AC_CONFIG_COMMANDS_PRE( [if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then AC_MSG_ERROR([[conditional "$1" was never defined. Usually this means the macro was only invoked conditionally.]]) fi])]) # Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 10 # There are a few dirty hacks below to avoid letting `AC_PROG_CC' be # written in clear, in which case automake, when reading aclocal.m4, # will think it sees a *use*, and therefore will trigger all it's # C support machinery. Also note that it means that autoscan, seeing # CC etc. in the Makefile, will ask for an AC_PROG_CC use... # _AM_DEPENDENCIES(NAME) # ---------------------- # See how the compiler implements dependency checking. # NAME is "CC", "CXX", "GCJ", or "OBJC". # We try a few techniques and use that to set a single cache variable. # # We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was # modified to invoke _AM_DEPENDENCIES(CC); we would have a circular # dependency, and given that the user is not expected to run this macro, # just rely on AC_PROG_CC. AC_DEFUN([_AM_DEPENDENCIES], [AC_REQUIRE([AM_SET_DEPDIR])dnl AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl AC_REQUIRE([AM_MAKE_INCLUDE])dnl AC_REQUIRE([AM_DEP_TRACK])dnl ifelse([$1], CC, [depcc="$CC" am_compiler_list=], [$1], CXX, [depcc="$CXX" am_compiler_list=], [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], [$1], UPC, [depcc="$UPC" am_compiler_list=], [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], [depcc="$$1" am_compiler_list=]) AC_CACHE_CHECK([dependency style of $depcc], [am_cv_$1_dependencies_compiler_type], [if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named `D' -- because `-MD' means `put the output # in D'. mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_$1_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` fi am__universal=false m4_case([$1], [CC], [case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac], [CXX], [case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac]) for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with # Solaris 8's {/usr,}/bin/sh. touch sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf # We check with `-c' and `-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle `-M -o', and we need to detect this. Also, some Intel # versions had trouble with output in subdirs am__obj=sub/conftest.${OBJEXT-o} am__minus_obj="-o $am__obj" case $depmode in gcc) # This depmode causes a compiler race in universal mode. test "$am__universal" = false || continue ;; nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; msvisualcpp | msvcmsys) # This compiler won't grok `-c -o', but also, the minuso test has # not run yet. These depmodes are late enough in the game, and # so weak that their functioning should not be impacted. am__obj=conftest.${OBJEXT-o} am__minus_obj= ;; none) break ;; esac if depmode=$depmode \ source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_$1_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_$1_dependencies_compiler_type=none fi ]) AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) AM_CONDITIONAL([am__fastdep$1], [ test "x$enable_dependency_tracking" != xno \ && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) ]) # AM_SET_DEPDIR # ------------- # Choose a directory name for dependency files. # This macro is AC_REQUIREd in _AM_DEPENDENCIES AC_DEFUN([AM_SET_DEPDIR], [AC_REQUIRE([AM_SET_LEADING_DOT])dnl AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl ]) # AM_DEP_TRACK # ------------ AC_DEFUN([AM_DEP_TRACK], [AC_ARG_ENABLE(dependency-tracking, [ --disable-dependency-tracking speeds up one-time build --enable-dependency-tracking do not reject slow dependency extractors]) if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' fi AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) AC_SUBST([AMDEPBACKSLASH])dnl _AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl ]) # Generate code to set up dependency tracking. -*- Autoconf -*- # Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. #serial 5 # _AM_OUTPUT_DEPENDENCY_COMMANDS # ------------------------------ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], [{ # Autoconf 2.62 quotes --file arguments for eval, but not when files # are listed without --file. Let's play safe and only enable the eval # if we detect the quoting. case $CONFIG_FILES in *\'*) eval set x "$CONFIG_FILES" ;; *) set x $CONFIG_FILES ;; esac shift for mf do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. # We used to match only the files named `Makefile.in', but # some people rename them; so instead we look at the file content. # Grep'ing the first line is not enough: some people post-process # each Makefile.in and add a new line on top of each file to say so. # Grep'ing the whole file is not good either: AIX grep has a line # limit of 2048, but all sed's we know have understand at least 4000. if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then dirpart=`AS_DIRNAME("$mf")` else continue fi # Extract the definition of DEPDIR, am__include, and am__quote # from the Makefile without running `make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue am__include=`sed -n 's/^am__include = //p' < "$mf"` test -z "am__include" && continue am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n 's/^U = //p' < "$mf"` # Find all dependency output files, they are included files with # $(DEPDIR) in their names. We invoke sed twice because it is the # simplest approach to changing $(DEPDIR) to its actual value in the # expansion. for file in `sed -n " s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`AS_DIRNAME(["$file"])` AS_MKDIR_P([$dirpart/$fdir]) # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done } ])# _AM_OUTPUT_DEPENDENCY_COMMANDS # AM_OUTPUT_DEPENDENCY_COMMANDS # ----------------------------- # This macro should only be invoked once -- use via AC_REQUIRE. # # This code is only required when automatic dependency tracking # is enabled. FIXME. This creates each `.P' file that we will # need in order to bootstrap the dependency handling code. AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], [AC_CONFIG_COMMANDS([depfiles], [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) ]) # Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 8 # AM_CONFIG_HEADER is obsolete. It has been replaced by AC_CONFIG_HEADERS. AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)]) # Do all the work for Automake. -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, # 2005, 2006, 2008, 2009 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 16 # This macro actually does too much. Some checks are only needed if # your package does certain things. But this isn't really a big deal. # AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) # AM_INIT_AUTOMAKE([OPTIONS]) # ----------------------------------------------- # The call with PACKAGE and VERSION arguments is the old style # call (pre autoconf-2.50), which is being phased out. PACKAGE # and VERSION should now be passed to AC_INIT and removed from # the call to AM_INIT_AUTOMAKE. # We support both call styles for the transition. After # the next Automake release, Autoconf can make the AC_INIT # arguments mandatory, and then we can depend on a new Autoconf # release and drop the old call support. AC_DEFUN([AM_INIT_AUTOMAKE], [AC_PREREQ([2.62])dnl dnl Autoconf wants to disallow AM_ names. We explicitly allow dnl the ones we care about. m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl AC_REQUIRE([AC_PROG_INSTALL])dnl if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output # is not polluted with repeated "-I." AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl # test to see if srcdir already configured if test -f $srcdir/config.status; then AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) fi fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi AC_SUBST([CYGPATH_W]) # Define the identity of the package. dnl Distinguish between old-style and new-style calls. m4_ifval([$2], [m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl AC_SUBST([PACKAGE], [$1])dnl AC_SUBST([VERSION], [$2])], [_AM_SET_OPTIONS([$1])dnl dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,, [m4_fatal([AC_INIT should be called with package and version arguments])])dnl AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl _AM_IF_OPTION([no-define],, [AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl # Some tools Automake needs. AC_REQUIRE([AM_SANITY_CHECK])dnl AC_REQUIRE([AC_ARG_PROGRAM])dnl AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) AM_MISSING_PROG(AUTOCONF, autoconf) AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) AM_MISSING_PROG(AUTOHEADER, autoheader) AM_MISSING_PROG(MAKEINFO, makeinfo) AC_REQUIRE([AM_PROG_INSTALL_SH])dnl AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl AC_REQUIRE([AM_PROG_MKDIR_P])dnl # We need awk for the "check" target. The system "awk" is bad on # some platforms. AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AM_SET_LEADING_DOT])dnl _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], [_AM_PROG_TAR([v7])])]) _AM_IF_OPTION([no-dependencies],, [AC_PROVIDE_IFELSE([AC_PROG_CC], [_AM_DEPENDENCIES(CC)], [define([AC_PROG_CC], defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl AC_PROVIDE_IFELSE([AC_PROG_CXX], [_AM_DEPENDENCIES(CXX)], [define([AC_PROG_CXX], defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl AC_PROVIDE_IFELSE([AC_PROG_OBJC], [_AM_DEPENDENCIES(OBJC)], [define([AC_PROG_OBJC], defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl ]) _AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl dnl The `parallel-tests' driver may need to know about EXEEXT, so add the dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro dnl is hooked onto _AC_COMPILER_EXEEXT early, see below. AC_CONFIG_COMMANDS_PRE(dnl [m4_provide_if([_AM_COMPILER_EXEEXT], [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl ]) dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion. Do not dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further dnl mangled by Autoconf and run in a shell conditional statement. m4_define([_AC_COMPILER_EXEEXT], m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) # When config.status generates a header, we must update the stamp-h file. # This file resides in the same directory as the config header # that is generated. The stamp files are numbered to have different names. # Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the # loop where config.status creates the headers, so we can generate # our stamp files there. AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], [# Compute $1's index in $config_headers. _am_arg=$1 _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in $_am_arg | $_am_arg:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) # Copyright (C) 2001, 2003, 2005, 2008 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_INSTALL_SH # ------------------ # Define $install_sh. AC_DEFUN([AM_PROG_INSTALL_SH], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl if test x"${install_sh}" != xset; then case $am_aux_dir in *\ * | *\ *) install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; *) install_sh="\${SHELL} $am_aux_dir/install-sh" esac fi AC_SUBST(install_sh)]) # Copyright (C) 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 2 # Check whether the underlying file-system supports filenames # with a leading dot. For instance MS-DOS doesn't. AC_DEFUN([AM_SET_LEADING_DOT], [rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null AC_SUBST([am__leading_dot])]) # Add --enable-maintainer-mode option to configure. -*- Autoconf -*- # From Jim Meyering # Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005, 2008 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 5 # AM_MAINTAINER_MODE([DEFAULT-MODE]) # ---------------------------------- # Control maintainer-specific portions of Makefiles. # Default is to disable them, unless `enable' is passed literally. # For symmetry, `disable' may be passed as well. Anyway, the user # can override the default with the --enable/--disable switch. AC_DEFUN([AM_MAINTAINER_MODE], [m4_case(m4_default([$1], [disable]), [enable], [m4_define([am_maintainer_other], [disable])], [disable], [m4_define([am_maintainer_other], [enable])], [m4_define([am_maintainer_other], [enable]) m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])]) AC_MSG_CHECKING([whether to am_maintainer_other maintainer-specific portions of Makefiles]) dnl maintainer-mode's default is 'disable' unless 'enable' is passed AC_ARG_ENABLE([maintainer-mode], [ --][am_maintainer_other][-maintainer-mode am_maintainer_other make rules and dependencies not useful (and sometimes confusing) to the casual installer], [USE_MAINTAINER_MODE=$enableval], [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes])) AC_MSG_RESULT([$USE_MAINTAINER_MODE]) AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes]) MAINT=$MAINTAINER_MODE_TRUE AC_SUBST([MAINT])dnl ] ) AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE]) # Check to see how 'make' treats includes. -*- Autoconf -*- # Copyright (C) 2001, 2002, 2003, 2005, 2009 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 4 # AM_MAKE_INCLUDE() # ----------------- # Check to see how make treats includes. AC_DEFUN([AM_MAKE_INCLUDE], [am_make=${MAKE-make} cat > confinc << 'END' am__doit: @echo this is the am__doit target .PHONY: am__doit END # If we don't find an include directive, just comment out the code. AC_MSG_CHECKING([for style of include used by $am_make]) am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf # Ignore all kinds of additional output from `make'. case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=include am__quote= _am_result=GNU ;; esac # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=.include am__quote="\"" _am_result=BSD ;; esac fi AC_SUBST([am__include]) AC_SUBST([am__quote]) AC_MSG_RESULT([$_am_result]) rm -f confinc confmf ]) # Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- # Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 6 # AM_MISSING_PROG(NAME, PROGRAM) # ------------------------------ AC_DEFUN([AM_MISSING_PROG], [AC_REQUIRE([AM_MISSING_HAS_RUN]) $1=${$1-"${am_missing_run}$2"} AC_SUBST($1)]) # AM_MISSING_HAS_RUN # ------------------ # Define MISSING if not defined so far and test if it supports --run. # If it does, set am_missing_run to use it, otherwise, to nothing. AC_DEFUN([AM_MISSING_HAS_RUN], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl AC_REQUIRE_AUX_FILE([missing])dnl if test x"${MISSING+set}" != xset; then case $am_aux_dir in *\ * | *\ *) MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; *) MISSING="\${SHELL} $am_aux_dir/missing" ;; esac fi # Use eval to expand $SHELL if eval "$MISSING --run true"; then am_missing_run="$MISSING --run " else am_missing_run= AC_MSG_WARN([`missing' script is too old or missing]) fi ]) # Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_MKDIR_P # --------------- # Check for `mkdir -p'. AC_DEFUN([AM_PROG_MKDIR_P], [AC_PREREQ([2.60])dnl AC_REQUIRE([AC_PROG_MKDIR_P])dnl dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P, dnl while keeping a definition of mkdir_p for backward compatibility. dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile. dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of dnl Makefile.ins that do not define MKDIR_P, so we do our own dnl adjustment using top_builddir (which is defined more often than dnl MKDIR_P). AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl case $mkdir_p in [[\\/$]]* | ?:[[\\/]]*) ;; */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; esac ]) # Helper functions for option handling. -*- Autoconf -*- # Copyright (C) 2001, 2002, 2003, 2005, 2008 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 4 # _AM_MANGLE_OPTION(NAME) # ----------------------- AC_DEFUN([_AM_MANGLE_OPTION], [[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) # _AM_SET_OPTION(NAME) # ------------------------------ # Set option NAME. Presently that only means defining a flag for this option. AC_DEFUN([_AM_SET_OPTION], [m4_define(_AM_MANGLE_OPTION([$1]), 1)]) # _AM_SET_OPTIONS(OPTIONS) # ---------------------------------- # OPTIONS is a space-separated list of Automake options. AC_DEFUN([_AM_SET_OPTIONS], [m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) # _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) # ------------------------------------------- # Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. AC_DEFUN([_AM_IF_OPTION], [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) # Check to make sure that the build environment is sane. -*- Autoconf -*- # Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 5 # AM_SANITY_CHECK # --------------- AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) # Just in case sleep 1 echo timestamp > conftest.file # Reject unsafe characters in $srcdir or the absolute working directory # name. Accept space and tab only in the latter. am_lf=' ' case `pwd` in *[[\\\"\#\$\&\'\`$am_lf]]*) AC_MSG_ERROR([unsafe absolute working directory name]);; esac case $srcdir in *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);; esac # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` if test "$[*]" = "X"; then # -L didn't work. set X `ls -t "$srcdir/configure" conftest.file` fi rm -f conftest.file if test "$[*]" != "X $srcdir/configure conftest.file" \ && test "$[*]" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken alias in your environment]) fi test "$[2]" = conftest.file ) then # Ok. : else AC_MSG_ERROR([newly created file is older than distributed files! Check your system clock]) fi AC_MSG_RESULT(yes)]) # Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_INSTALL_STRIP # --------------------- # One issue with vendor `install' (even GNU) is that you can't # specify the program used to strip binaries. This is especially # annoying in cross-compiling environments, where the build's strip # is unlikely to handle the host's binaries. # Fortunately install-sh will honor a STRIPPROG variable, so we # always use install-sh in `make install-strip', and initialize # STRIPPROG with the value of the STRIP variable (set by the user). AC_DEFUN([AM_PROG_INSTALL_STRIP], [AC_REQUIRE([AM_PROG_INSTALL_SH])dnl # Installed binaries are usually stripped using `strip' when the user # run `make install-strip'. However `strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the `STRIP' environment variable to overrule this program. dnl Don't test for $cross_compiling = yes, because it might be `maybe'. if test "$cross_compiling" != no; then AC_CHECK_TOOL([STRIP], [strip], :) fi INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) # Copyright (C) 2006, 2008 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 2 # _AM_SUBST_NOTMAKE(VARIABLE) # --------------------------- # Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. # This macro is traced by Automake. AC_DEFUN([_AM_SUBST_NOTMAKE]) # AM_SUBST_NOTMAKE(VARIABLE) # --------------------------- # Public sister of _AM_SUBST_NOTMAKE. AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) # Check how to create a tarball. -*- Autoconf -*- # Copyright (C) 2004, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 2 # _AM_PROG_TAR(FORMAT) # -------------------- # Check how to create a tarball in format FORMAT. # FORMAT should be one of `v7', `ustar', or `pax'. # # Substitute a variable $(am__tar) that is a command # writing to stdout a FORMAT-tarball containing the directory # $tardir. # tardir=directory && $(am__tar) > result.tar # # Substitute a variable $(am__untar) that extract such # a tarball read from stdin. # $(am__untar) < result.tar AC_DEFUN([_AM_PROG_TAR], [# Always define AMTAR for backward compatibility. AM_MISSING_PROG([AMTAR], [tar]) m4_if([$1], [v7], [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], [m4_case([$1], [ustar],, [pax],, [m4_fatal([Unknown tar format])]) AC_MSG_CHECKING([how to create a $1 tar archive]) # Loop over all known methods to create a tar archive until one works. _am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' _am_tools=${am_cv_prog_tar_$1-$_am_tools} # Do not fold the above two line into one, because Tru64 sh and # Solaris sh will not grok spaces in the rhs of `-'. for _am_tool in $_am_tools do case $_am_tool in gnutar) for _am_tar in tar gnutar gtar; do AM_RUN_LOG([$_am_tar --version]) && break done am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' am__untar="$_am_tar -xf -" ;; plaintar) # Must skip GNU tar: if it does not support --format= it doesn't create # ustar tarball either. (tar --version) >/dev/null 2>&1 && continue am__tar='tar chf - "$$tardir"' am__tar_='tar chf - "$tardir"' am__untar='tar xf -' ;; pax) am__tar='pax -L -x $1 -w "$$tardir"' am__tar_='pax -L -x $1 -w "$tardir"' am__untar='pax -r' ;; cpio) am__tar='find "$$tardir" -print | cpio -o -H $1 -L' am__tar_='find "$tardir" -print | cpio -o -H $1 -L' am__untar='cpio -i -H $1 -d' ;; none) am__tar=false am__tar_=false am__untar=false ;; esac # If the value was cached, stop now. We just wanted to have am__tar # and am__untar set. test -n "${am_cv_prog_tar_$1}" && break # tar/untar a dummy directory, and stop if the command works rm -rf conftest.dir mkdir conftest.dir echo GrepMe > conftest.dir/file AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) rm -rf conftest.dir if test -s conftest.tar; then AM_RUN_LOG([$am__untar /dev/null 2>&1 && break fi done rm -rf conftest.dir AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) AC_MSG_RESULT([$am_cv_prog_tar_$1])]) AC_SUBST([am__tar]) AC_SUBST([am__untar]) ]) # _AM_PROG_TAR m4_include([m4/gnome-doc-utils.m4]) m4_include([m4/intltool.m4]) m4_include([m4/libtool.m4]) m4_include([m4/ltoptions.m4]) m4_include([m4/ltsugar.m4]) m4_include([m4/ltversion.m4]) m4_include([m4/lt~obsolete.m4]) netspeed_applet-0.16/TODO0000644000175000017500000000112411402426203012215 00000000000000* the icons are not perfectly clear (difference in/out) [done] * option to show frame/don't show frame around applet [done] * option to show sum instead of in/out [done] * plipX device support ? [done] * themeable icons ? * set size of labels according to the maximum possible size [done] * add a load-graph to the details-dialog ? [done] * if showsum is on the label should be center-justified in a >= 48 panel [done] * let the user chose between bit and bytes [done] * let the user chose the icon themselves (instead of setting it according to the device) [done - but in another way] * ... netspeed_applet-0.16/configure.in0000644000175000017500000000276111402460035014047 00000000000000AC_PREREQ(2.52) AC_INIT(netspeed_applet, 0.16, http://www.gnome.org/projects/netspeed) AC_CONFIG_SRCDIR(src/netspeed.c) AM_INIT_AUTOMAKE(AC_PACKAGE_NAME, AC_PACKAGE_VERSION) AM_MAINTAINER_MODE AM_CONFIG_HEADER(config.h) AC_CONFIG_MACRO_DIR([m4]) IT_PROG_INTLTOOL([0.35.0]) AM_PROG_LIBTOOL AC_ISC_POSIX AC_PROG_CC AC_PROG_INSTALL AC_PROG_MAKE_SET AM_GLIB_GNU_GETTEXT GETTEXT_PACKAGE=netspeed_applet AC_SUBST(GETTEXT_PACKAGE) AC_DEFINE_UNQUOTED(GETTEXT_PACKAGE, "$GETTEXT_PACKAGE", GETTEXT_PACKAGE) PKG_CHECK_MODULES(NETSPEED, libpanelapplet-2.0 libgtop-2.0 >= 2.14.2) AC_SUBST(NETSPEED_APPLET_CFLAGS) AC_SUBST(NETSPEED_APPLET_LIBS) GNOME_DOC_INIT ac_have_iwevgenie=no AC_MSG_CHECKING([for wireless-tools >= 28pre9]) AC_COMPILE_IFELSE([ #include #ifndef IWEVGENIE #error "not found" #endif], ac_have_iwevgenie=yes ) AC_MSG_RESULT([$ac_have_iwevgenie]) if test "$ac_have_iwevgenie" = yes; then AC_DEFINE(HAVE_IW, 1, [Defined if you have wirelesstools]) IWLIB=-liw AC_SUBST(IWLIB) fi AC_OUTPUT([ netspeed_applet.spec Makefile icons/Makefile icons/16x16/Makefile icons/16x16/apps/Makefile icons/16x16/devices/Makefile icons/22x22/Makefile icons/22x22/apps/Makefile icons/24x24/Makefile icons/24x24/apps/Makefile icons/24x24/status/Makefile icons/32x32/Makefile icons/32x32/apps/Makefile icons/48x48/Makefile icons/48x48/apps/Makefile icons/scalable/Makefile icons/scalable/apps/Makefile src/Makefile po/Makefile.in help/Makefile ]) netspeed_applet-0.16/intltool-update.in0000644000175000017500000000000011402461230015170 00000000000000netspeed_applet-0.16/Makefile.in0000644000175000017500000006405111402461244013606 00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = . DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ $(srcdir)/Makefile.in $(srcdir)/config.h.in \ $(srcdir)/netspeed_applet.spec.in $(top_srcdir)/configure \ AUTHORS COPYING ChangeLog INSTALL NEWS TODO config.guess \ config.sub depcomp install-sh ltmain.sh missing mkinstalldirs ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno config.status.lineno mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = config.h CONFIG_CLEAN_FILES = netspeed_applet.spec CONFIG_CLEAN_VPATH_FILES = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-dvi-recursive install-exec-recursive \ install-html-recursive install-info-recursive \ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__installdirs = "$(DESTDIR)$(serverdir)" DATA = $(server_DATA) RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ distdir dist dist-all distcheck ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ { test ! -d "$(distdir)" \ || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ && rm -fr "$(distdir)"; }; } am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" DIST_ARCHIVES = $(distdir).tar.gz GZIP_ENV = --best distcleancheck_listfiles = find . -type f -print ACLOCAL = @ACLOCAL@ ALL_LINGUAS = @ALL_LINGUAS@ AMTAR = @AMTAR@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CATALOGS = @CATALOGS@ CATOBJEXT = @CATOBJEXT@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DISTCHECK_CONFIGURE_FLAGS = --disable-scrollkeeper DOC_USER_FORMATS = @DOC_USER_FORMATS@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GMOFILES = @GMOFILES@ GMSGFMT = @GMSGFMT@ GREP = @GREP@ HELP_DIR = @HELP_DIR@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTOBJEXT = @INSTOBJEXT@ INTLLIBS = @INTLLIBS@ INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ INTLTOOL_MERGE = @INTLTOOL_MERGE@ INTLTOOL_PERL = @INTLTOOL_PERL@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ IWLIB = @IWLIB@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ MKINSTALLDIRS = @MKINSTALLDIRS@ MSGFMT = @MSGFMT@ MSGFMT_OPTS = @MSGFMT_OPTS@ MSGMERGE = @MSGMERGE@ NETSPEED_APPLET_CFLAGS = @NETSPEED_APPLET_CFLAGS@ NETSPEED_APPLET_LIBS = @NETSPEED_APPLET_LIBS@ NETSPEED_CFLAGS = @NETSPEED_CFLAGS@ NETSPEED_LIBS = @NETSPEED_LIBS@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OMF_DIR = @OMF_DIR@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ POFILES = @POFILES@ POSUB = @POSUB@ PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ XGETTEXT = @XGETTEXT@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ SUBDIRS = help icons po src serverdir = $(libdir)/bonobo/servers server_DATA = GNOME_NetspeedApplet.server server_in_files = $(server_DATA:=.in) server_in_in_files = $(server_in_files:=.in) distuninstallcheck_listfiles = find . -type f -print | grep -v scrollkeeper spec = $(PACKAGE).spec EXTRA_DIST = GNOME_NetspeedApplet.server.in.in \ $(spec) \ gnome-doc-utils.make \ intltool-update.in \ intltool-merge.in \ intltool-extract.in CLEANFILES = $(server_DATA) DISTCLEANFILES = \ gnome-doc-utils.make \ intltool-extract \ intltool-merge \ intltool-update \ $(server_in_files) all: config.h $(MAKE) $(AM_MAKEFLAGS) all-recursive .SUFFIXES: am--refresh: @: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \ $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ echo ' $(SHELL) ./config.status'; \ $(SHELL) ./config.status;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) $(am__cd) $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) $(am__aclocal_m4_deps): config.h: stamp-h1 @if test ! -f $@; then \ rm -f stamp-h1; \ $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \ else :; fi stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status @rm -f stamp-h1 cd $(top_builddir) && $(SHELL) ./config.status config.h $(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) rm -f stamp-h1 touch $@ distclean-hdr: -rm -f config.h stamp-h1 netspeed_applet.spec: $(top_builddir)/config.status $(srcdir)/netspeed_applet.spec.in cd $(top_builddir) && $(SHELL) ./config.status $@ mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool config.lt install-serverDATA: $(server_DATA) @$(NORMAL_INSTALL) test -z "$(serverdir)" || $(MKDIR_P) "$(DESTDIR)$(serverdir)" @list='$(server_DATA)'; test -n "$(serverdir)" || list=; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(serverdir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(serverdir)" || exit $$?; \ done uninstall-serverDATA: @$(NORMAL_UNINSTALL) @list='$(server_DATA)'; test -n "$(serverdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ test -n "$$files" || exit 0; \ echo " ( cd '$(DESTDIR)$(serverdir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(serverdir)" && rm -f $$files # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" $(RECURSIVE_CLEAN_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) $(am__remove_distdir) test -d "$(distdir)" || mkdir "$(distdir)" @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done -test -n "$(am__skip_mode_fix)" \ || find "$(distdir)" -type d ! -perm -755 \ -exec chmod u+rwx,go+rx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r "$(distdir)" dist-gzip: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) dist-bzip2: distdir tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 $(am__remove_distdir) dist-lzma: distdir tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma $(am__remove_distdir) dist-xz: distdir tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz $(am__remove_distdir) dist-tarZ: distdir tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__remove_distdir) dist-shar: distdir shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz $(am__remove_distdir) dist-zip: distdir -rm -f $(distdir).zip zip -rq $(distdir).zip $(distdir) $(am__remove_distdir) dist dist-all: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.lzma*) \ lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\ *.tar.xz*) \ xz -dc $(distdir).tar.xz | $(am__untar) ;;\ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ esac chmod -R a-w $(distdir); chmod a+w $(distdir) mkdir $(distdir)/_build mkdir $(distdir)/_inst chmod a-w $(distdir) test -d $(distdir)/_build || exit 0; \ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ && am__cwd=`pwd` \ && $(am__cd) $(distdir)/_build \ && ../configure --srcdir=.. --prefix="$$dc_install_base" \ $(DISTCHECK_CONFIGURE_FLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) uninstall \ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ } || { rm -rf "$$dc_destdir"; exit 1; }) \ && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist \ && rm -rf $(DIST_ARCHIVES) \ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ && cd "$$am__cwd" \ || exit 1 $(am__remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' distuninstallcheck: @$(am__cd) '$(distuninstallcheck_dir)' \ && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ echo " (check DESTDIR support)"; \ fi ; \ $(distuninstallcheck_listfiles) ; \ exit 1; } >&2 distcleancheck: distclean @if test '$(srcdir)' = . ; then \ echo "ERROR: distcleancheck can only run from a VPATH build" ; \ exit 1 ; \ fi @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left in build directory after distclean:" ; \ $(distcleancheck_listfiles) ; \ exit 1; } >&2 check-am: all-am check: check-recursive all-am: Makefile $(DATA) config.h all-local installdirs: installdirs-recursive installdirs-am: for dir in "$(DESTDIR)$(serverdir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -f Makefile distclean-am: clean-am distclean-generic distclean-hdr \ distclean-libtool distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: install-serverDATA install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf $(top_srcdir)/autom4te.cache -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-serverDATA .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \ ctags-recursive install-am install-strip tags-recursive .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ all all-am all-local am--refresh check check-am clean \ clean-generic clean-libtool ctags ctags-recursive dist \ dist-all dist-bzip2 dist-gzip dist-lzma dist-shar dist-tarZ \ dist-xz dist-zip distcheck distclean distclean-generic \ distclean-hdr distclean-libtool distclean-tags distcleancheck \ distdir distuninstallcheck dvi dvi-am html html-am info \ info-am install install-am install-data install-data-am \ install-dvi install-dvi-am install-exec install-exec-am \ install-html install-html-am install-info install-info-am \ install-man install-pdf install-pdf-am install-ps \ install-ps-am install-serverDATA install-strip installcheck \ installcheck-am installdirs installdirs-am maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-generic \ mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ uninstall uninstall-am uninstall-serverDATA @INTLTOOL_SERVER_RULE@ all-local: $(spec) $(server_DATA) $(server_in_files): $(server_in_in_files) Makefile sed s,@LIBEXECDIR@,$(libexecdir),g <$< >$@ # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: netspeed_applet-0.16/missing0000755000175000017500000002623311402461242013136 00000000000000#! /bin/sh # Common stub for a few missing GNU programs while installing. scriptversion=2009-04-28.21; # UTC # Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006, # 2008, 2009 Free Software Foundation, Inc. # Originally by Fran,cois Pinard , 1996. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. if test $# -eq 0; then echo 1>&2 "Try \`$0 --help' for more information" exit 1 fi run=: sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p' sed_minuso='s/.* -o \([^ ]*\).*/\1/p' # In the cases where this matters, `missing' is being run in the # srcdir already. if test -f configure.ac; then configure_ac=configure.ac else configure_ac=configure.in fi msg="missing on your system" case $1 in --run) # Try to run requested program, and just exit if it succeeds. run= shift "$@" && exit 0 # Exit code 63 means version mismatch. This often happens # when the user try to use an ancient version of a tool on # a file that requires a minimum version. In this case we # we should proceed has if the program had been absent, or # if --run hadn't been passed. if test $? = 63; then run=: msg="probably too old" fi ;; -h|--h|--he|--hel|--help) echo "\ $0 [OPTION]... PROGRAM [ARGUMENT]... Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an error status if there is no known handling for PROGRAM. Options: -h, --help display this help and exit -v, --version output version information and exit --run try to run the given command, and emulate it if it fails Supported PROGRAM values: aclocal touch file \`aclocal.m4' autoconf touch file \`configure' autoheader touch file \`config.h.in' autom4te touch the output file, or create a stub one automake touch all \`Makefile.in' files bison create \`y.tab.[ch]', if possible, from existing .[ch] flex create \`lex.yy.c', if possible, from existing .c help2man touch the output file lex create \`lex.yy.c', if possible, from existing .c makeinfo touch the output file tar try tar, gnutar, gtar, then tar without non-portable flags yacc create \`y.tab.[ch]', if possible, from existing .[ch] Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and \`g' are ignored when checking the name. Send bug reports to ." exit $? ;; -v|--v|--ve|--ver|--vers|--versi|--versio|--version) echo "missing $scriptversion (GNU Automake)" exit $? ;; -*) echo 1>&2 "$0: Unknown \`$1' option" echo 1>&2 "Try \`$0 --help' for more information" exit 1 ;; esac # normalize program name to check for. program=`echo "$1" | sed ' s/^gnu-//; t s/^gnu//; t s/^g//; t'` # Now exit if we have it, but it failed. Also exit now if we # don't have it and --version was passed (most likely to detect # the program). This is about non-GNU programs, so use $1 not # $program. case $1 in lex*|yacc*) # Not GNU programs, they don't have --version. ;; tar*) if test -n "$run"; then echo 1>&2 "ERROR: \`tar' requires --run" exit 1 elif test "x$2" = "x--version" || test "x$2" = "x--help"; then exit 1 fi ;; *) if test -z "$run" && ($1 --version) > /dev/null 2>&1; then # We have it, but it failed. exit 1 elif test "x$2" = "x--version" || test "x$2" = "x--help"; then # Could not run --version or --help. This is probably someone # running `$TOOL --version' or `$TOOL --help' to check whether # $TOOL exists and not knowing $TOOL uses missing. exit 1 fi ;; esac # If it does not exist, or fails to run (possibly an outdated version), # try to emulate it. case $program in aclocal*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." touch aclocal.m4 ;; autoconf*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." touch configure ;; autoheader*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`acconfig.h' or \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` test -z "$files" && files="config.h" touch_files= for f in $files; do case $f in *:*) touch_files="$touch_files "`echo "$f" | sed -e 's/^[^:]*://' -e 's/:.*//'`;; *) touch_files="$touch_files $f.in";; esac done touch $touch_files ;; automake*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." find . -type f -name Makefile.am -print | sed 's/\.am$/.in/' | while read f; do touch "$f"; done ;; autom4te*) echo 1>&2 "\ WARNING: \`$1' is needed, but is $msg. You might have modified some files without having the proper tools for further handling them. You can get \`$1' as part of \`Autoconf' from any GNU archive site." file=`echo "$*" | sed -n "$sed_output"` test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` if test -f "$file"; then touch $file else test -z "$file" || exec >$file echo "#! /bin/sh" echo "# Created by GNU Automake missing as a replacement of" echo "# $ $@" echo "exit 0" chmod +x $file exit 1 fi ;; bison*|yacc*) echo 1>&2 "\ WARNING: \`$1' $msg. You should only need it if you modified a \`.y' file. You may need the \`Bison' package in order for those modifications to take effect. You can get \`Bison' from any GNU archive site." rm -f y.tab.c y.tab.h if test $# -ne 1; then eval LASTARG="\${$#}" case $LASTARG in *.y) SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` if test -f "$SRCFILE"; then cp "$SRCFILE" y.tab.c fi SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` if test -f "$SRCFILE"; then cp "$SRCFILE" y.tab.h fi ;; esac fi if test ! -f y.tab.h; then echo >y.tab.h fi if test ! -f y.tab.c; then echo 'main() { return 0; }' >y.tab.c fi ;; lex*|flex*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a \`.l' file. You may need the \`Flex' package in order for those modifications to take effect. You can get \`Flex' from any GNU archive site." rm -f lex.yy.c if test $# -ne 1; then eval LASTARG="\${$#}" case $LASTARG in *.l) SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` if test -f "$SRCFILE"; then cp "$SRCFILE" lex.yy.c fi ;; esac fi if test ! -f lex.yy.c; then echo 'main() { return 0; }' >lex.yy.c fi ;; help2man*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a dependency of a manual page. You may need the \`Help2man' package in order for those modifications to take effect. You can get \`Help2man' from any GNU archive site." file=`echo "$*" | sed -n "$sed_output"` test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` if test -f "$file"; then touch $file else test -z "$file" || exec >$file echo ".ab help2man is required to generate this page" exit $? fi ;; makeinfo*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a \`.texi' or \`.texinfo' file, or any other file indirectly affecting the aspect of the manual. The spurious call might also be the consequence of using a buggy \`make' (AIX, DU, IRIX). You might want to install the \`Texinfo' package or the \`GNU make' package. Grab either from any GNU archive site." # The file to touch is that specified with -o ... file=`echo "$*" | sed -n "$sed_output"` test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` if test -z "$file"; then # ... or it is the one specified with @setfilename ... infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` file=`sed -n ' /^@setfilename/{ s/.* \([^ ]*\) *$/\1/ p q }' $infile` # ... or it is derived from the source name (dir/f.texi becomes f.info) test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info fi # If the file does not exist, the user really needs makeinfo; # let's fail without touching anything. test -f $file || exit 1 touch $file ;; tar*) shift # We have already tried tar in the generic part. # Look for gnutar/gtar before invocation to avoid ugly error # messages. if (gnutar --version > /dev/null 2>&1); then gnutar "$@" && exit 0 fi if (gtar --version > /dev/null 2>&1); then gtar "$@" && exit 0 fi firstarg="$1" if shift; then case $firstarg in *o*) firstarg=`echo "$firstarg" | sed s/o//` tar "$firstarg" "$@" && exit 0 ;; esac case $firstarg in *h*) firstarg=`echo "$firstarg" | sed s/h//` tar "$firstarg" "$@" && exit 0 ;; esac fi echo 1>&2 "\ WARNING: I can't seem to be able to run \`tar' with the given arguments. You may want to install GNU tar or Free paxutils, or check the command line arguments." exit 1 ;; *) echo 1>&2 "\ WARNING: \`$1' is needed, and is $msg. You might have modified some files without having the proper tools for further handling them. Check the \`README' file, it often tells you about the needed prerequisites for installing this package. You may also peek at any GNU archive site, in case some other package would contain this missing \`$1' program." exit 1 ;; esac exit 0 # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC" # time-stamp-end: "; # UTC" # End: netspeed_applet-0.16/netspeed_applet.spec0000644000175000017500000000155011402461622015564 00000000000000Summary: Applet that shows traffic on a network device Name: netspeed_applet Version: 0.16 Release: 1 URL: http://mfcn.ilo.de/netspeed_applet/ Source0: %{name}-%{version}.tar.gz License: GPL Group: Gnome/Applets BuildRoot: %{_tmppath}/%{name}-%{version}-root Prefix: %{_prefix} BuildRequires: pkgconfig BuildRequires: intltool BuildRequires: gnome-panel-devel BuildRequires: libgnomeui-devel BuildRequires: libgtop-devel %description netspeed_applet is a little GNOME applet that shows the traffic on a specified network device (for example eth0) in kbytes/s. %prep %setup -q %build %configure %__make %install rm -rf %{buildroot} %makeinstall %find_lang netspeed_applet %clean rm -rf %{buildroot} %files -f netspeed_applet.lang %defattr(-,root,root) %doc AUTHORS COPYING NEWS README TODO %{prefix}/libexec/* %{prefix}/lib/bonobo/servers/* %{prefix}/share/pixmaps/* netspeed_applet-0.16/gnome-doc-utils.make0000644000175000017500000005471711362773621015430 00000000000000# gnome-doc-utils.make - make magic for building documentation # Copyright (C) 2004-2005 Shaun McCance # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software Foundation, # Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. ################################################################################ ## @@ Generating Header Files ## @ DOC_H_FILE ## The name of the header file to generate DOC_H_FILE ?= ## @ DOC_H_DOCS ## The input DocBook files for generating the header file DOC_H_DOCS ?= $(DOC_H_FILE): $(DOC_H_DOCS); @rm -f $@.tmp; touch $@.tmp; echo 'const gchar* documentation_credits[] = {' >> $@.tmp list='$(DOC_H_DOCS)'; for doc in $$list; do \ xmlpath="`echo $$doc | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`:$(srcdir)/`echo $$doc | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`"; \ if ! test -f "$$doc"; then doc="$(srcdir)/$$doc"; fi; \ xsltproc --path "$$xmlpath" $(_credits) $$doc; \ done | sort | uniq \ | awk 'BEGIN{s=""}{n=split($$0,w,"<");if(s!=""&&s!=substr(w[1],1,length(w[1])-1)){print s};if(n>1){print $$0;s=""}else{s=$$0}};END{if(s!=""){print s}}' \ | sed -e 's/\\/\\\\/' -e 's/"/\\"/' -e 's/\(.*\)/\t"\1",/' >> $@.tmp echo ' NULL' >> $@.tmp echo '};' >> $@.tmp echo >> $@.tmp list='$(DOC_H_DOCS)'; for doc in $$list; do \ xmlpath="`echo $$doc | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`:$(srcdir)/`echo $$doc | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`"; \ if ! test -f "$$doc"; then doc="$(srcdir)/$$doc"; fi; \ docid=`echo "$$doc" | sed -e 's/.*\/\([^/]*\)\.xml/\1/' \ | sed -e 's/[^a-zA-Z_]/_/g' | tr 'a-z' 'A-Z'`; \ echo $$xmlpath; \ ids=`xsltproc --xinclude --path "$$xmlpath" $(_ids) $$doc`; \ for id in $$ids; do \ echo '#define HELP_'`echo $$docid`'_'`echo $$id \ | sed -e 's/[^a-zA-Z_]/_/g' | tr 'a-z' 'A-Z'`' "'$$id'"' >> $@.tmp; \ done; \ echo >> $@.tmp; \ done; cp $@.tmp $@ && rm -f $@.tmp dist-check-gdu: if !HAVE_GNOME_DOC_UTILS @echo "*** GNOME Doc Utils must be installed in order to make dist" @false endif .PHONY: dist-doc-header dist-doc-header: $(DOC_H_FILE) @if test -f "$(DOC_H_FILE)"; then d=; else d="$(srcdir)/"; fi; \ echo "$(INSTALL_DATA) $${d}$(DOC_H_FILE) $(distdir)/$(DOC_H_FILE)"; \ $(INSTALL_DATA) "$${d}$(DOC_H_FILE)" "$(distdir)/$(DOC_H_FILE)"; doc-dist-hook: dist-check-gdu $(if $(DOC_H_FILE),dist-doc-header) .PHONY: clean-doc-header _clean_doc_header = $(if $(DOC_H_FILE),clean-doc-header) clean-local: $(_clean_doc_header) distclean-local: $(_clean_doc_header) mostlyclean-local: $(_clean_doc_header) maintainer-clean-local: $(_clean_doc_header) clean-doc-header: rm -f $(DOC_H_FILE) all: $(DOC_H_FILE) ################################################################################ ## @@ Generating Documentation Files ## @ DOC_MODULE ## The name of the document being built DOC_MODULE ?= ## @ DOC_ID ## The unique identifier for a Mallard document DOC_ID ?= ## @ DOC_PAGES ## Page files in a Mallard document DOC_PAGES ?= ## @ DOC_ENTITIES ## Files included with a SYSTEM entity DOC_ENTITIES ?= ## @ DOC_INCLUDES ## Files included with XInclude DOC_INCLUDES ?= ## @ DOC_FIGURES ## Figures and other external data DOC_FIGURES ?= ## @ DOC_FORMATS ## The default formats to be built and installed DOC_FORMATS ?= docbook _DOC_REAL_FORMATS = $(if $(DOC_USER_FORMATS),$(DOC_USER_FORMATS),$(DOC_FORMATS)) ## @ DOC_LINGUAS ## The languages this document is translated into DOC_LINGUAS ?= _DOC_REAL_LINGUAS = $(if $(filter environment,$(origin LINGUAS)), \ $(filter $(LINGUAS),$(DOC_LINGUAS)), \ $(DOC_LINGUAS)) _DOC_ABS_SRCDIR = @abs_srcdir@ ################################################################################ ## Variables for Bootstrapping _xml2po ?= `which xml2po` _xml2po_mode = $(if $(DOC_ID),mallard,docbook) _db2html ?= `$(PKG_CONFIG) --variable db2html gnome-doc-utils` _db2omf ?= `$(PKG_CONFIG) --variable db2omf gnome-doc-utils` _malrng ?= `$(PKG_CONFIG) --variable malrng gnome-doc-utils` _chunks ?= `$(PKG_CONFIG) --variable xmldir gnome-doc-utils`/gnome/xslt/docbook/utils/chunks.xsl _credits ?= `$(PKG_CONFIG) --variable xmldir gnome-doc-utils`/gnome/xslt/docbook/utils/credits.xsl _ids ?= `$(PKG_CONFIG) --variable xmldir gnome-doc-utils`/gnome/xslt/docbook/utils/ids.xsl if ENABLE_SK _ENABLE_SK = true _skpkgdatadir ?= `scrollkeeper-config --pkgdatadir` _sklocalstatedir ?= `scrollkeeper-config --pkglocalstatedir` _skcontentslist ?= $(_skpkgdatadir)/Templates/C/scrollkeeper_cl.xml endif ################################################################################ ## @@ Rules for OMF Files db2omf_args = \ --stringparam db2omf.basename $(DOC_MODULE) \ --stringparam db2omf.format $(3) \ --stringparam db2omf.dtd \ $(shell xmllint --format $(2) | grep -h PUBLIC | head -n 1 \ | sed -e 's/.*PUBLIC \(\"[^\"]*\"\).*/\1/') \ --stringparam db2omf.lang $(notdir $(patsubst %/$(notdir $(2)),%,$(2))) \ --stringparam db2omf.omf_dir "$(OMF_DIR)" \ --stringparam db2omf.help_dir "$(HELP_DIR)" \ --stringparam db2omf.omf_in "$(_DOC_OMF_IN)" \ $(if $(_ENABLE_SK), \ --stringparam db2omf.scrollkeeper_cl "$(_skcontentslist)") \ $(_db2omf) $(2) ## @ _DOC_OMF_IN ## The OMF input file _DOC_OMF_IN = $(if $(DOC_MODULE),$(wildcard $(_DOC_ABS_SRCDIR)/$(DOC_MODULE).omf.in)) ## @ _DOC_OMF_DB ## The OMF files for DocBook output _DOC_OMF_DB = $(if $(_DOC_OMF_IN), \ $(foreach lc,C $(_DOC_REAL_LINGUAS),$(DOC_MODULE)-$(lc).omf)) $(_DOC_OMF_DB) : $(_DOC_OMF_IN) $(_DOC_OMF_DB) : $(DOC_MODULE)-%.omf : %/$(DOC_MODULE).xml @test "x$(_ENABLE_SK)" != "xtrue" -o -f "$(_skcontentslist)" || { \ echo "The file '$(_skcontentslist)' does not exist." >&2; \ echo "Please check your ScrollKeeper installation." >&2; \ exit 1; } xsltproc -o $@ $(call db2omf_args,$@,$<,'docbook') || { rm -f "$@"; exit 1; } ## @ _DOC_OMF_HTML ## The OMF files for HTML output _DOC_OMF_HTML = $(if $(_DOC_OMF_IN), \ $(foreach lc,C $(_DOC_REAL_LINGUAS),$(DOC_MODULE)-html-$(lc).omf)) $(_DOC_OMF_HTML) : $(_DOC_OMF_IN) $(_DOC_OMF_HTML) : $(DOC_MODULE)-html-%.omf : %/$(DOC_MODULE).xml if ENABLE_SK @test "x$(_ENABLE_SK)" != "xtrue" -o -f "$(_skcontentslist)" || { \ echo "The file '$(_skcontentslist)' does not exist" >&2; \ echo "Please check your ScrollKeeper installation." >&2; \ exit 1; } endif xsltproc -o $@ $(call db2omf_args,$@,$<,'xhtml') || { rm -f "$@"; exit 1; } ## @ _DOC_OMF_ALL ## All OMF output files to be built # FIXME _DOC_OMF_ALL = \ $(if $(filter docbook,$(_DOC_REAL_FORMATS)),$(_DOC_OMF_DB)) \ $(if $(filter html HTML,$(_DOC_REAL_FORMATS)),$(_DOC_OMF_HTML)) .PHONY: omf omf: $(_DOC_OMF_ALL) ################################################################################ ## @@ C Locale Documents ## @ _DOC_C_MODULE ## The top-level documentation file in the C locale _DOC_C_MODULE = $(if $(DOC_MODULE),C/$(DOC_MODULE).xml) ## @ _DOC_C_PAGES ## Page files in a Mallard document in the C locale _DOC_C_PAGES = $(foreach page,$(DOC_PAGES),C/$(page)) ## @ _DOC_C_ENTITIES ## Files included with a SYSTEM entity in the C locale _DOC_C_ENTITIES = $(foreach ent,$(DOC_ENTITIES),C/$(ent)) ## @ _DOC_C_XINCLUDES ## Files included with XInclude in the C locale _DOC_C_INCLUDES = $(foreach inc,$(DOC_INCLUDES),C/$(inc)) ## @ _DOC_C_DOCS ## All documentation files in the C locale _DOC_C_DOCS = \ $(_DOC_C_ENTITIES) $(_DOC_C_INCLUDES) \ $(_DOC_C_PAGES) $(_DOC_C_MODULE) ## @ _DOC_C_DOCS_NOENT ## All documentation files in the C locale, ## except files included with a SYSTEM entity _DOC_C_DOCS_NOENT = \ $(_DOC_C_MODULE) $(_DOC_C_INCLUDES) \ $(_DOC_C_PAGES) ## @ _DOC_C_FIGURES ## All figures and other external data in the C locale _DOC_C_FIGURES = $(if $(DOC_FIGURES), \ $(foreach fig,$(DOC_FIGURES),C/$(fig)), \ $(patsubst $(srcdir)/%,%,$(wildcard $(srcdir)/C/figures/*.png))) ## @ _DOC_C_HTML ## All HTML documentation in the C locale # FIXME: probably have to shell escape to determine the file names _DOC_C_HTML = $(foreach f, \ $(shell xsltproc --xinclude \ --stringparam db.chunk.basename "$(DOC_MODULE)" \ $(_chunks) "C/$(DOC_MODULE).xml"), \ C/$(f).xhtml) ############################################################################### ## @@ Other Locale Documentation ## @ _DOC_POFILES ## The .po files used for translating the document _DOC_POFILES = $(if $(DOC_MODULE)$(DOC_ID), \ $(foreach lc,$(_DOC_REAL_LINGUAS),$(lc)/$(lc).po)) .PHONY: po po: $(_DOC_POFILES) ## @ _DOC_MOFILES ## The .mo files used for translating the document _DOC_MOFILES = $(patsubst %.po,%.mo,$(_DOC_POFILES)) .PHONY: mo mo: $(_DOC_MOFILES) ## @ _DOC_LC_MODULES ## The top-level documentation files in all other locales _DOC_LC_MODULES = $(if $(DOC_MODULE), \ $(foreach lc,$(_DOC_REAL_LINGUAS),$(lc)/$(DOC_MODULE).xml)) ## @ _DOC_LC_PAGES ## Page files in a Mallard document in all other locales _DOC_LC_PAGES = \ $(foreach lc,$(_DOC_REAL_LINGUAS),$(foreach page,$(_DOC_C_PAGES), \ $(lc)/$(notdir $(page)) )) ## @ _DOC_LC_XINCLUDES ## Files included with XInclude in all other locales _DOC_LC_INCLUDES = \ $(foreach lc,$(_DOC_REAL_LINGUAS),$(foreach inc,$(_DOC_C_INCLUDES), \ $(lc)/$(notdir $(inc)) )) ## @ _DOC_LC_HTML ## All HTML documentation in all other locales # FIXME: probably have to shell escape to determine the file names _DOC_LC_HTML = \ $(foreach lc,$(_DOC_REAL_LINGUAS),$(foreach doc,$(_DOC_C_HTML), \ $(lc)/$(notdir $(doc)) )) ## @ _DOC_LC_DOCS ## All documentation files in all other locales _DOC_LC_DOCS = \ $(_DOC_LC_MODULES) $(_DOC_LC_INCLUDES) $(_DOC_LC_PAGES) \ $(if $(filter html HTML,$(_DOC_REAL_FORMATS)),$(_DOC_LC_HTML)) ## @ _DOC_LC_FIGURES ## All figures and other external data in all other locales _DOC_LC_FIGURES = $(foreach lc,$(_DOC_REAL_LINGUAS), \ $(patsubst C/%,$(lc)/%,$(_DOC_C_FIGURES)) ) _DOC_SRC_FIGURES = \ $(foreach fig,$(_DOC_C_FIGURES), $(foreach lc,C $(_DOC_REAL_LINGUAS), \ $(wildcard $(srcdir)/$(lc)/$(patsubst C/%,%,$(fig))) )) $(_DOC_POFILES): @if ! test -d $(dir $@); then \ echo "mkdir $(dir $@)"; \ mkdir "$(dir $@)"; \ fi @if test ! -f $@ -a -f $(srcdir)/$@; then \ echo "cp $(srcdir)/$@ $@"; \ cp "$(srcdir)/$@" "$@"; \ fi; @docs=; \ list='$(_DOC_C_DOCS_NOENT)'; for doc in $$list; do \ docs="$$docs $(_DOC_ABS_SRCDIR)/$$doc"; \ done; \ if ! test -f $@; then \ echo "(cd $(dir $@) && \ $(_xml2po) -m $(_xml2po_mode) -e $$docs > $(notdir $@).tmp && \ cp $(notdir $@).tmp $(notdir $@) && rm -f $(notdir $@).tmp)"; \ (cd $(dir $@) && \ $(_xml2po) -m $(_xml2po_mode) -e $$docs > $(notdir $@).tmp && \ cp $(notdir $@).tmp $(notdir $@) && rm -f $(notdir $@).tmp); \ else \ echo "(cd $(dir $@) && \ $(_xml2po) -m $(_xml2po_mode) -e -u $(notdir $@) $$docs)"; \ (cd $(dir $@) && \ $(_xml2po) -m $(_xml2po_mode) -e -u $(notdir $@) $$docs); \ fi $(_DOC_MOFILES): %.mo: %.po @if ! test -d $(dir $@); then \ echo "mkdir $(dir $@)"; \ mkdir "$(dir $@)"; \ fi msgfmt -o $@ $< # FIXME: fix the dependancy # FIXME: hook xml2po up $(_DOC_LC_DOCS) : $(_DOC_MOFILES) $(_DOC_LC_DOCS) : $(_DOC_C_DOCS) if ! test -d $(dir $@); then mkdir $(dir $@); fi if [ -f "C/$(notdir $@)" ]; then d="../"; else d="$(_DOC_ABS_SRCDIR)/"; fi; \ mo="$(dir $@)$(patsubst %/$(notdir $@),%,$@).mo"; \ if [ -f "$${mo}" ]; then mo="../$${mo}"; else mo="$(_DOC_ABS_SRCDIR)/$${mo}"; fi; \ (cd $(dir $@) && \ $(_xml2po) -m $(_xml2po_mode) -e -t "$${mo}" \ "$${d}C/$(notdir $@)" > $(notdir $@).tmp && \ cp $(notdir $@).tmp $(notdir $@) && rm -f $(notdir $@).tmp) ## @ _DOC_POT ## A pot file _DOC_POT = $(if $(DOC_MODULE),$(DOC_MODULE).pot) .PHONY: pot pot: $(_DOC_POT) $(_DOC_POT): $(_DOC_C_DOCS_NOENT) $(_xml2po) -m $(_xml2po_mode) -e -o $@ $^ ################################################################################ ## @@ All Documentation ## @ _DOC_HTML_ALL ## All HTML documentation, only if it's built _DOC_HTML_ALL = $(if $(filter html HTML,$(_DOC_REAL_FORMATS)), \ $(_DOC_C_HTML) $(_DOC_LC_HTML)) _DOC_HTML_TOPS = $(foreach lc,C $(_DOC_REAL_LINGUAS),$(lc)/$(DOC_MODULE).xhtml) $(_DOC_HTML_TOPS): $(_DOC_C_DOCS) $(_DOC_LC_DOCS) xsltproc -o $@ --xinclude --param db.chunk.chunk_top "false()" --stringparam db.chunk.basename "$(DOC_MODULE)" --stringparam db.chunk.extension ".xhtml" $(_db2html) $(patsubst %.xhtml,%.xml,$@) ################################################################################ ## All all: \ $(_DOC_C_DOCS) $(_DOC_LC_DOCS) \ $(_DOC_OMF_ALL) $(_DOC_DSK_ALL) \ $(_DOC_HTML_ALL) $(_DOC_POFILES) ################################################################################ ## Clean .PHONY: clean-doc-omf clean-doc-dsk clean-doc-lc clean-doc-dir clean-doc-omf: ; rm -f $(_DOC_OMF_DB) $(_DOC_OMF_HTML) clean-doc-dsk: ; rm -f $(_DOC_DSK_DB) $(_DOC_DSK_HTML) clean-doc-lc: rm -f $(_DOC_LC_DOCS) rm -f $(_DOC_MOFILES) @list='$(_DOC_POFILES)'; for po in $$list; do \ if ! test "$$po" -ef "$(srcdir)/$$po"; then \ echo "rm -f $$po"; \ rm -f "$$po"; \ fi; \ done # .xml2.po.mo cleaning is obsolete as of 0.18.1 and could be removed in 0.20.x @for lc in C $(_DOC_REAL_LINGUAS); do \ if test -f "$$lc/.xml2po.mo"; then \ echo "rm -f $$lc/.xml2po.mo"; \ rm -f "$$lc/.xml2po.mo"; \ fi; \ done clean-doc-dir: clean-doc-lc @for lc in C $(_DOC_REAL_LINGUAS); do \ for dir in `find $$lc -depth -type d`; do \ if ! test $$dir -ef $(srcdir)/$$dir; then \ echo "rmdir $$dir"; \ rmdir "$$dir"; \ fi; \ done; \ done _clean_omf = $(if $(_DOC_OMF_IN),clean-doc-omf) _clean_dsk = $(if $(_DOC_DSK_IN),clean-doc-dsk) _clean_lc = $(if $(_DOC_REAL_LINGUAS),clean-doc-lc) _clean_dir = $(if $(DOC_MODULE)$(DOC_ID),clean-doc-dir) clean-local: \ $(_clean_omf) $(_clean_dsk) \ $(_clean_lc) $(_clean_dir) distclean-local: \ $(_clean_omf) $(_clean_dsk) \ $(_clean_lc) $(_clean_dir) mostlyclean-local: \ $(_clean_omf) $(_clean_dsk) \ $(_clean_lc) $(_clean_dir) maintainer-clean-local: \ $(_clean_omf) $(_clean_dsk) \ $(_clean_lc) $(_clean_dir) ################################################################################ ## Dist .PHONY: dist-doc-docs dist-doc-pages dist-doc-figs dist-doc-omf dist-doc-dsk doc-dist-hook: \ $(if $(DOC_MODULE)$(DOC_ID),dist-doc-docs) \ $(if $(_DOC_C_FIGURES),dist-doc-figs) \ $(if $(_DOC_OMF_IN),dist-doc-omf) # $(if $(_DOC_DSK_IN),dist-doc-dsk) dist-doc-docs: $(_DOC_C_DOCS) $(_DOC_LC_DOCS) $(_DOC_POFILES) @for lc in C $(_DOC_REAL_LINGUAS); do \ echo " $(mkinstalldirs) $(distdir)/$$lc"; \ $(mkinstalldirs) "$(distdir)/$$lc"; \ done @list='$(_DOC_C_DOCS) $(_DOC_LC_DOCS) $(_DOC_POFILES)'; \ for doc in $$list; do \ if test -f "$$doc"; then d=; else d="$(srcdir)/"; fi; \ docdir=`echo $$doc | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`; \ if ! test -d "$(distdir)/$$docdir"; then \ echo "$(mkinstalldirs) $(distdir)/$$docdir"; \ $(mkinstalldirs) "$(distdir)/$$docdir"; \ fi; \ echo "$(INSTALL_DATA) $$d$$doc $(distdir)/$$doc"; \ $(INSTALL_DATA) "$$d$$doc" "$(distdir)/$$doc"; \ done dist-doc-figs: $(_DOC_SRC_FIGURES) @list='$(_DOC_C_FIGURES) $(_DOC_LC_FIGURES)'; \ for fig in $$list; do \ if test -f "$$fig"; then d=; else d="$(srcdir)/"; fi; \ if test -f "$$d$$fig"; then \ figdir=`echo $$fig | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`; \ if ! test -d "$(distdir)/$$figdir"; then \ echo "$(mkinstalldirs) $(distdir)/$$figdir"; \ $(mkinstalldirs) "$(distdir)/$$figdir"; \ fi; \ echo "$(INSTALL_DATA) $$d$$fig $(distdir)/$$fig"; \ $(INSTALL_DATA) "$$d$$fig" "$(distdir)/$$fig"; \ fi; \ done; dist-doc-omf: @if test -f "$(_DOC_OMF_IN)"; then d=; else d="$(srcdir)/"; fi; \ echo "$(INSTALL_DATA) $$d$(_DOC_OMF_IN) $(distdir)/$(notdir $(_DOC_OMF_IN))"; \ $(INSTALL_DATA) "$$d$(_DOC_OMF_IN)" "$(distdir)/$(notdir $(_DOC_OMF_IN))" dist-doc-dsk: @if test -f "$(_DOC_DSK_IN)"; then d=; else d="$(srcdir)/"; fi; \ echo "$(INSTALL_DATA) $$d$(_DOC_DSK_IN) $(distdir)/$(notdir $(_DOC_DSK_IN))"; \ $(INSTALL_DATA) "$$d$(_DOC_DSK_IN)" "$(distdir)/$(notdir $(_DOC_DSK_IN))" ################################################################################ ## Check .PHONY: check-doc-docs check-doc-omf check: \ $(if $(DOC_MODULE),check-doc-docs) \ $(if $(DOC_ID),check-doc-pages) \ $(if $(_DOC_OMF_IN),check-doc-omf) check-doc-docs: $(_DOC_C_DOCS) $(_DOC_LC_DOCS) @for lc in C $(_DOC_REAL_LINGUAS); do \ if test -f "$$lc"; \ then d=; \ xmlpath="$$lc"; \ else \ d="$(srcdir)/"; \ xmlpath="$$lc:$(srcdir)/$$lc"; \ fi; \ echo "xmllint --noout --noent --path $$xmlpath --xinclude --postvalid $$d$$lc/$(DOC_MODULE).xml"; \ xmllint --noout --noent --path "$$xmlpath" --xinclude --postvalid "$$d$$lc/$(DOC_MODULE).xml"; \ done check-doc-pages: $(_DOC_C_PAGES) $(_DOC_LC_PAGES) for lc in C $(_DOC_REAL_LINGUAS); do \ if test -f "$$lc"; \ then d=; \ xmlpath="$$lc"; \ else \ d="$(srcdir)/"; \ xmlpath="$$lc:$(srcdir)/$$lc"; \ fi; \ for page in $(DOC_PAGES); do \ echo "xmllint --noout --noent --path $$xmlpath --xinclude --relaxng $(_malrng) $$d$$lc/$$page"; \ xmllint --noout --noent --path "$$xmlpath" --xinclude --relaxng "$(_malrng)" "$$d$$lc/$$page"; \ done; \ done check-doc-omf: $(_DOC_OMF_ALL) @list='$(_DOC_OMF_ALL)'; for omf in $$list; do \ echo "xmllint --noout --xinclude --dtdvalid 'http://scrollkeeper.sourceforge.net/dtds/scrollkeeper-omf-1.0/scrollkeeper-omf.dtd' $$omf"; \ xmllint --noout --xinclude --dtdvalid 'http://scrollkeeper.sourceforge.net/dtds/scrollkeeper-omf-1.0/scrollkeeper-omf.dtd' $$omf; \ done ################################################################################ ## Install .PHONY: install-doc-docs install-doc-html install-doc-figs install-doc-omf install-doc-dsk _doc_install_dir = $(if $(DOC_ID),$(DOC_ID),$(DOC_MODULE)) install-data-local: \ $(if $(DOC_MODULE)$(DOC_ID),install-doc-docs) \ $(if $(_DOC_HTML_ALL),install-doc-html) \ $(if $(_DOC_C_FIGURES),install-doc-figs) \ $(if $(_DOC_OMF_IN),install-doc-omf) # $(if $(_DOC_DSK_IN),install-doc-dsk) install-doc-docs: @for lc in C $(_DOC_REAL_LINGUAS); do \ echo "$(mkinstalldirs) $(DESTDIR)$(HELP_DIR)/$(_doc_install_dir)/$$lc"; \ $(mkinstalldirs) $(DESTDIR)$(HELP_DIR)/$(_doc_install_dir)/$$lc; \ done @list='$(_DOC_C_DOCS) $(_DOC_LC_DOCS)'; for doc in $$list; do \ if test -f "$$doc"; then d=; else d="$(srcdir)/"; fi; \ docdir="$$lc/"`echo $$doc | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`; \ docdir="$(DESTDIR)$(HELP_DIR)/$(_doc_install_dir)/$$docdir"; \ if ! test -d "$$docdir"; then \ echo "$(mkinstalldirs) $$docdir"; \ $(mkinstalldirs) "$$docdir"; \ fi; \ echo "$(INSTALL_DATA) $$d$$doc $(DESTDIR)$(HELP_DIR)/$(_doc_install_dir)/$$doc"; \ $(INSTALL_DATA) $$d$$doc $(DESTDIR)$(HELP_DIR)/$(_doc_install_dir)/$$doc; \ done install-doc-figs: @list='$(patsubst C/%,%,$(_DOC_C_FIGURES))'; for fig in $$list; do \ for lc in C $(_DOC_REAL_LINGUAS); do \ figsymlink=false; \ if test -f "$$lc/$$fig"; then \ figfile="$$lc/$$fig"; \ elif test -f "$(srcdir)/$$lc/$$fig"; then \ figfile="$(srcdir)/$$lc/$$fig"; \ else \ figsymlink=true; \ fi; \ figdir="$$lc/"`echo $$fig | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`; \ figdir="$(DESTDIR)$(HELP_DIR)/$(_doc_install_dir)/$$figdir"; \ if ! test -d "$$figdir"; then \ echo "$(mkinstalldirs) $$figdir"; \ $(mkinstalldirs) "$$figdir"; \ fi; \ figbase=`echo $$fig | sed -e 's/^.*\///'`; \ if $$figsymlink; then \ echo "cd $$figdir && $(LN_S) -f ../../C/$$fig $$figbase"; \ ( cd "$$figdir" && $(LN_S) -f "../../C/$$fig" "$$figbase" ); \ else \ echo "$(INSTALL_DATA) $$figfile $$figdir$$figbase"; \ $(INSTALL_DATA) "$$figfile" "$$figdir$$figbase"; \ fi; \ done; \ done install-doc-html: echo install-html install-doc-omf: $(mkinstalldirs) $(DESTDIR)$(OMF_DIR)/$(_doc_install_dir) @list='$(_DOC_OMF_ALL)'; for omf in $$list; do \ echo "$(INSTALL_DATA) $$omf $(DESTDIR)$(OMF_DIR)/$(_doc_install_dir)/$$omf"; \ $(INSTALL_DATA) $$omf $(DESTDIR)$(OMF_DIR)/$(_doc_install_dir)/$$omf; \ done @if test "x$(_ENABLE_SK)" = "xtrue"; then \ echo "scrollkeeper-update -p $(DESTDIR)$(_sklocalstatedir) -o $(DESTDIR)$(OMF_DIR)/$(_doc_install_dir)"; \ scrollkeeper-update -p "$(DESTDIR)$(_sklocalstatedir)" -o "$(DESTDIR)$(OMF_DIR)/$(_doc_install_dir)"; \ fi; install-doc-dsk: echo install-dsk ################################################################################ ## Uninstall .PHONY: uninstall-doc-docs uninstall-doc-html uninstall-doc-figs uninstall-doc-omf uninstall-doc-dsk uninstall-local: \ $(if $(DOC_MODULE)$(DOC_ID),uninstall-doc-docs) \ $(if $(_DOC_HTML_ALL),uninstall-doc-html) \ $(if $(_DOC_C_FIGURES),uninstall-doc-figs) \ $(if $(_DOC_OMF_IN),uninstall-doc-omf) # $(if $(_DOC_DSK_IN),uninstall-doc-dsk) uninstall-doc-docs: @list='$(_DOC_C_DOCS) $(_DOC_LC_DOCS)'; for doc in $$list; do \ echo " rm -f $(DESTDIR)$(HELP_DIR)/$(_doc_install_dir)/$$doc"; \ rm -f "$(DESTDIR)$(HELP_DIR)/$(_doc_install_dir)/$$doc"; \ done uninstall-doc-figs: @list='$(_DOC_C_FIGURES) $(_DOC_LC_FIGURES)'; for fig in $$list; do \ echo "rm -f $(DESTDIR)$(HELP_DIR)/$(_doc_install_dir)/$$fig"; \ rm -f "$(DESTDIR)$(HELP_DIR)/$(_doc_install_dir)/$$fig"; \ done; uninstall-doc-omf: @list='$(_DOC_OMF_ALL)'; for omf in $$list; do \ if test "x$(_ENABLE_SK)" = "xtrue"; then \ echo "scrollkeeper-uninstall -p $(_sklocalstatedir) $(DESTDIR)$(OMF_DIR)/$(_doc_install_dir)/$$omf"; \ scrollkeeper-uninstall -p "$(_sklocalstatedir)" "$(DESTDIR)$(OMF_DIR)/$(_doc_install_dir)/$$omf"; \ fi; \ echo "rm -f $(DESTDIR)$(OMF_DIR)/$(_doc_install_dir)/$$omf"; \ rm -f "$(DESTDIR)$(OMF_DIR)/$(_doc_install_dir)/$$omf"; \ done netspeed_applet-0.16/install-sh0000755000175000017500000003253711402461242013547 00000000000000#!/bin/sh # install - install a program, script, or datafile scriptversion=2009-04-28.21; # UTC # This originates from X11R5 (mit/util/scripts/install.sh), which was # later released in X11R6 (xc/config/util/install.sh) with the # following copyright and license. # # Copyright (C) 1994 X Consortium # # Permission is hereby granted, free of charge, to any person obtaining a copy # of this software and associated documentation files (the "Software"), to # deal in the Software without restriction, including without limitation the # rights to use, copy, modify, merge, publish, distribute, sublicense, and/or # sell copies of the Software, and to permit persons to whom the Software is # furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE # X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN # AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- # TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. # # Except as contained in this notice, the name of the X Consortium shall not # be used in advertising or otherwise to promote the sale, use or other deal- # ings in this Software without prior written authorization from the X Consor- # tium. # # # FSF changes to this file are in the public domain. # # Calling this script install-sh is preferred over install.sh, to prevent # `make' implicit rules from creating a file called install from it # when there is no Makefile. # # This script is compatible with the BSD install script, but was written # from scratch. nl=' ' IFS=" "" $nl" # set DOITPROG to echo to test this script # Don't use :- since 4.3BSD and earlier shells don't like it. doit=${DOITPROG-} if test -z "$doit"; then doit_exec=exec else doit_exec=$doit fi # Put in absolute file names if you don't have them in your path; # or use environment vars. chgrpprog=${CHGRPPROG-chgrp} chmodprog=${CHMODPROG-chmod} chownprog=${CHOWNPROG-chown} cmpprog=${CMPPROG-cmp} cpprog=${CPPROG-cp} mkdirprog=${MKDIRPROG-mkdir} mvprog=${MVPROG-mv} rmprog=${RMPROG-rm} stripprog=${STRIPPROG-strip} posix_glob='?' initialize_posix_glob=' test "$posix_glob" != "?" || { if (set -f) 2>/dev/null; then posix_glob= else posix_glob=: fi } ' posix_mkdir= # Desired mode of installed file. mode=0755 chgrpcmd= chmodcmd=$chmodprog chowncmd= mvcmd=$mvprog rmcmd="$rmprog -f" stripcmd= src= dst= dir_arg= dst_arg= copy_on_change=false no_target_directory= usage="\ Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE or: $0 [OPTION]... SRCFILES... DIRECTORY or: $0 [OPTION]... -t DIRECTORY SRCFILES... or: $0 [OPTION]... -d DIRECTORIES... In the 1st form, copy SRCFILE to DSTFILE. In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. In the 4th, create DIRECTORIES. Options: --help display this help and exit. --version display version info and exit. -c (ignored) -C install only if different (preserve the last data modification time) -d create directories instead of installing files. -g GROUP $chgrpprog installed files to GROUP. -m MODE $chmodprog installed files to MODE. -o USER $chownprog installed files to USER. -s $stripprog installed files. -t DIRECTORY install into DIRECTORY. -T report an error if DSTFILE is a directory. Environment variables override the default commands: CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG " while test $# -ne 0; do case $1 in -c) ;; -C) copy_on_change=true;; -d) dir_arg=true;; -g) chgrpcmd="$chgrpprog $2" shift;; --help) echo "$usage"; exit $?;; -m) mode=$2 case $mode in *' '* | *' '* | *' '* | *'*'* | *'?'* | *'['*) echo "$0: invalid mode: $mode" >&2 exit 1;; esac shift;; -o) chowncmd="$chownprog $2" shift;; -s) stripcmd=$stripprog;; -t) dst_arg=$2 shift;; -T) no_target_directory=true;; --version) echo "$0 $scriptversion"; exit $?;; --) shift break;; -*) echo "$0: invalid option: $1" >&2 exit 1;; *) break;; esac shift done if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then # When -d is used, all remaining arguments are directories to create. # When -t is used, the destination is already specified. # Otherwise, the last argument is the destination. Remove it from $@. for arg do if test -n "$dst_arg"; then # $@ is not empty: it contains at least $arg. set fnord "$@" "$dst_arg" shift # fnord fi shift # arg dst_arg=$arg done fi if test $# -eq 0; then if test -z "$dir_arg"; then echo "$0: no input file specified." >&2 exit 1 fi # It's OK to call `install-sh -d' without argument. # This can happen when creating conditional directories. exit 0 fi if test -z "$dir_arg"; then trap '(exit $?); exit' 1 2 13 15 # Set umask so as not to create temps with too-generous modes. # However, 'strip' requires both read and write access to temps. case $mode in # Optimize common cases. *644) cp_umask=133;; *755) cp_umask=22;; *[0-7]) if test -z "$stripcmd"; then u_plus_rw= else u_plus_rw='% 200' fi cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; *) if test -z "$stripcmd"; then u_plus_rw= else u_plus_rw=,u+rw fi cp_umask=$mode$u_plus_rw;; esac fi for src do # Protect names starting with `-'. case $src in -*) src=./$src;; esac if test -n "$dir_arg"; then dst=$src dstdir=$dst test -d "$dstdir" dstdir_status=$? else # Waiting for this to be detected by the "$cpprog $src $dsttmp" command # might cause directories to be created, which would be especially bad # if $src (and thus $dsttmp) contains '*'. if test ! -f "$src" && test ! -d "$src"; then echo "$0: $src does not exist." >&2 exit 1 fi if test -z "$dst_arg"; then echo "$0: no destination specified." >&2 exit 1 fi dst=$dst_arg # Protect names starting with `-'. case $dst in -*) dst=./$dst;; esac # If destination is a directory, append the input filename; won't work # if double slashes aren't ignored. if test -d "$dst"; then if test -n "$no_target_directory"; then echo "$0: $dst_arg: Is a directory" >&2 exit 1 fi dstdir=$dst dst=$dstdir/`basename "$src"` dstdir_status=0 else # Prefer dirname, but fall back on a substitute if dirname fails. dstdir=` (dirname "$dst") 2>/dev/null || expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$dst" : 'X\(//\)[^/]' \| \ X"$dst" : 'X\(//\)$' \| \ X"$dst" : 'X\(/\)' \| . 2>/dev/null || echo X"$dst" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q' ` test -d "$dstdir" dstdir_status=$? fi fi obsolete_mkdir_used=false if test $dstdir_status != 0; then case $posix_mkdir in '') # Create intermediate dirs using mode 755 as modified by the umask. # This is like FreeBSD 'install' as of 1997-10-28. umask=`umask` case $stripcmd.$umask in # Optimize common cases. *[2367][2367]) mkdir_umask=$umask;; .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; *[0-7]) mkdir_umask=`expr $umask + 22 \ - $umask % 100 % 40 + $umask % 20 \ - $umask % 10 % 4 + $umask % 2 `;; *) mkdir_umask=$umask,go-w;; esac # With -d, create the new directory with the user-specified mode. # Otherwise, rely on $mkdir_umask. if test -n "$dir_arg"; then mkdir_mode=-m$mode else mkdir_mode= fi posix_mkdir=false case $umask in *[123567][0-7][0-7]) # POSIX mkdir -p sets u+wx bits regardless of umask, which # is incompatible with FreeBSD 'install' when (umask & 300) != 0. ;; *) tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 if (umask $mkdir_umask && exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 then if test -z "$dir_arg" || { # Check for POSIX incompatibilities with -m. # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or # other-writeable bit of parent directory when it shouldn't. # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. ls_ld_tmpdir=`ls -ld "$tmpdir"` case $ls_ld_tmpdir in d????-?r-*) different_mode=700;; d????-?--*) different_mode=755;; *) false;; esac && $mkdirprog -m$different_mode -p -- "$tmpdir" && { ls_ld_tmpdir_1=`ls -ld "$tmpdir"` test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" } } then posix_mkdir=: fi rmdir "$tmpdir/d" "$tmpdir" else # Remove any dirs left behind by ancient mkdir implementations. rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null fi trap '' 0;; esac;; esac if $posix_mkdir && ( umask $mkdir_umask && $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" ) then : else # The umask is ridiculous, or mkdir does not conform to POSIX, # or it failed possibly due to a race condition. Create the # directory the slow way, step by step, checking for races as we go. case $dstdir in /*) prefix='/';; -*) prefix='./';; *) prefix='';; esac eval "$initialize_posix_glob" oIFS=$IFS IFS=/ $posix_glob set -f set fnord $dstdir shift $posix_glob set +f IFS=$oIFS prefixes= for d do test -z "$d" && continue prefix=$prefix$d if test -d "$prefix"; then prefixes= else if $posix_mkdir; then (umask=$mkdir_umask && $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break # Don't fail if two instances are running concurrently. test -d "$prefix" || exit 1 else case $prefix in *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; *) qprefix=$prefix;; esac prefixes="$prefixes '$qprefix'" fi fi prefix=$prefix/ done if test -n "$prefixes"; then # Don't fail if two instances are running concurrently. (umask $mkdir_umask && eval "\$doit_exec \$mkdirprog $prefixes") || test -d "$dstdir" || exit 1 obsolete_mkdir_used=true fi fi fi if test -n "$dir_arg"; then { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 else # Make a couple of temp file names in the proper directory. dsttmp=$dstdir/_inst.$$_ rmtmp=$dstdir/_rm.$$_ # Trap to clean up those temp files at exit. trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 # Copy the file name to the temp name. (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && # and set any options; do chmod last to preserve setuid bits. # # If any of these fail, we abort the whole thing. If we want to # ignore errors from any of these, just make sure not to ignore # errors from the above "$doit $cpprog $src $dsttmp" command. # { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && # If -C, don't bother to copy if it wouldn't change the file. if $copy_on_change && old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && eval "$initialize_posix_glob" && $posix_glob set -f && set X $old && old=:$2:$4:$5:$6 && set X $new && new=:$2:$4:$5:$6 && $posix_glob set +f && test "$old" = "$new" && $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 then rm -f "$dsttmp" else # Rename the file to the real destination. $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || # The rename failed, perhaps because mv can't rename something else # to itself, or perhaps because mv is so ancient that it does not # support -f. { # Now remove or move aside any old file at destination location. # We try this two ways since rm can't unlink itself on some # systems and the destination file might be busy for other # reasons. In this case, the final cleanup might fail but the new # file should still install successfully. { test ! -f "$dst" || $doit $rmcmd -f "$dst" 2>/dev/null || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } } || { echo "$0: cannot unlink or rename $dst" >&2 (exit 1); exit 1 } } && # Now rename the file to the real destination. $doit $mvcmd "$dsttmp" "$dst" } fi || exit 1 trap '' 0 fi done # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC" # time-stamp-end: "; # UTC" # End: netspeed_applet-0.16/config.h.in0000644000175000017500000000430111402461240013550 00000000000000/* config.h.in. Generated from configure.in by autoheader. */ /* always defined to indicate that i18n is enabled */ #undef ENABLE_NLS /* GETTEXT_PACKAGE */ #undef GETTEXT_PACKAGE /* Define to 1 if you have the `bind_textdomain_codeset' function. */ #undef HAVE_BIND_TEXTDOMAIN_CODESET /* Define to 1 if you have the `dcgettext' function. */ #undef HAVE_DCGETTEXT /* Define to 1 if you have the header file. */ #undef HAVE_DLFCN_H /* Define if the GNU gettext() function is already present or preinstalled. */ #undef HAVE_GETTEXT /* Define to 1 if you have the header file. */ #undef HAVE_INTTYPES_H /* Defined if you have wirelesstools */ #undef HAVE_IW /* Define if your file defines LC_MESSAGES. */ #undef HAVE_LC_MESSAGES /* Define to 1 if you have the header file. */ #undef HAVE_LOCALE_H /* Define to 1 if you have the header file. */ #undef HAVE_MEMORY_H /* Define to 1 if you have the header file. */ #undef HAVE_STDINT_H /* Define to 1 if you have the header file. */ #undef HAVE_STDLIB_H /* Define to 1 if you have the header file. */ #undef HAVE_STRINGS_H /* Define to 1 if you have the header file. */ #undef HAVE_STRING_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_STAT_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_TYPES_H /* Define to 1 if you have the header file. */ #undef HAVE_UNISTD_H /* Define to the sub-directory in which libtool stores uninstalled libraries. */ #undef LT_OBJDIR /* Name of package */ #undef PACKAGE /* Define to the address where bug reports for this package should be sent. */ #undef PACKAGE_BUGREPORT /* Define to the full name of this package. */ #undef PACKAGE_NAME /* Define to the full name and version of this package. */ #undef PACKAGE_STRING /* Define to the one symbol short name of this package. */ #undef PACKAGE_TARNAME /* Define to the home page for this package. */ #undef PACKAGE_URL /* Define to the version of this package. */ #undef PACKAGE_VERSION /* Define to 1 if you have the ANSI C header files. */ #undef STDC_HEADERS /* Version number of package */ #undef VERSION netspeed_applet-0.16/INSTALL0000644000175000017500000003633211402461244012573 00000000000000Installation Instructions ************************* Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. Copying and distribution of this file, with or without modification, are permitted in any medium without royalty provided the copyright notice and this notice are preserved. This file is offered as-is, without warranty of any kind. Basic Installation ================== Briefly, the shell commands `./configure; make; make install' should configure, build, and install this package. The following more-detailed instructions are generic; see the `README' file for instructions specific to this package. Some packages provide this `INSTALL' file but do not implement all of the features documented below. The lack of an optional feature in a given package is not necessarily a bug. More recommendations for GNU packages can be found in *note Makefile Conventions: (standards)Makefile Conventions. The `configure' shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses those values to create a `Makefile' in each directory of the package. It may also create one or more `.h' files containing system-dependent definitions. Finally, it creates a shell script `config.status' that you can run in the future to recreate the current configuration, and a file `config.log' containing compiler output (useful mainly for debugging `configure'). It can also use an optional file (typically called `config.cache' and enabled with `--cache-file=config.cache' or simply `-C') that saves the results of its tests to speed up reconfiguring. Caching is disabled by default to prevent problems with accidental use of stale cache files. If you need to do unusual things to compile the package, please try to figure out how `configure' could check whether to do them, and mail diffs or instructions to the address given in the `README' so they can be considered for the next release. If you are using the cache, and at some point `config.cache' contains results you don't want to keep, you may remove or edit it. The file `configure.ac' (or `configure.in') is used to create `configure' by a program called `autoconf'. You need `configure.ac' if you want to change it or regenerate `configure' using a newer version of `autoconf'. The simplest way to compile this package is: 1. `cd' to the directory containing the package's source code and type `./configure' to configure the package for your system. Running `configure' might take a while. While running, it prints some messages telling which features it is checking for. 2. Type `make' to compile the package. 3. Optionally, type `make check' to run any self-tests that come with the package, generally using the just-built uninstalled binaries. 4. Type `make install' to install the programs and any data files and documentation. When installing into a prefix owned by root, it is recommended that the package be configured and built as a regular user, and only the `make install' phase executed with root privileges. 5. Optionally, type `make installcheck' to repeat any self-tests, but this time using the binaries in their final installed location. This target does not install anything. Running this target as a regular user, particularly if the prior `make install' required root privileges, verifies that the installation completed correctly. 6. You can remove the program binaries and object files from the source code directory by typing `make clean'. To also remove the files that `configure' created (so you can compile the package for a different kind of computer), type `make distclean'. There is also a `make maintainer-clean' target, but that is intended mainly for the package's developers. If you use it, you may have to get all sorts of other programs in order to regenerate files that came with the distribution. 7. Often, you can also type `make uninstall' to remove the installed files again. In practice, not all packages have tested that uninstallation works correctly, even though it is required by the GNU Coding Standards. 8. Some packages, particularly those that use Automake, provide `make distcheck', which can by used by developers to test that all other targets like `make install' and `make uninstall' work correctly. This target is generally not run by end users. Compilers and Options ===================== Some systems require unusual options for compilation or linking that the `configure' script does not know about. Run `./configure --help' for details on some of the pertinent environment variables. You can give `configure' initial values for configuration parameters by setting variables in the command line or in the environment. Here is an example: ./configure CC=c99 CFLAGS=-g LIBS=-lposix *Note Defining Variables::, for more details. Compiling For Multiple Architectures ==================================== You can compile the package for more than one kind of computer at the same time, by placing the object files for each architecture in their own directory. To do this, you can use GNU `make'. `cd' to the directory where you want the object files and executables to go and run the `configure' script. `configure' automatically checks for the source code in the directory that `configure' is in and in `..'. This is known as a "VPATH" build. With a non-GNU `make', it is safer to compile the package for one architecture at a time in the source code directory. After you have installed the package for one architecture, use `make distclean' before reconfiguring for another architecture. On MacOS X 10.5 and later systems, you can create libraries and executables that work on multiple system types--known as "fat" or "universal" binaries--by specifying multiple `-arch' options to the compiler but only a single `-arch' option to the preprocessor. Like this: ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ CPP="gcc -E" CXXCPP="g++ -E" This is not guaranteed to produce working output in all cases, you may have to build one architecture at a time and combine the results using the `lipo' tool if you have problems. Installation Names ================== By default, `make install' installs the package's commands under `/usr/local/bin', include files under `/usr/local/include', etc. You can specify an installation prefix other than `/usr/local' by giving `configure' the option `--prefix=PREFIX', where PREFIX must be an absolute file name. You can specify separate installation prefixes for architecture-specific files and architecture-independent files. If you pass the option `--exec-prefix=PREFIX' to `configure', the package uses PREFIX as the prefix for installing programs and libraries. Documentation and other data files still use the regular prefix. In addition, if you use an unusual directory layout you can give options like `--bindir=DIR' to specify different values for particular kinds of files. Run `configure --help' for a list of the directories you can set and what kinds of files go in them. In general, the default for these options is expressed in terms of `${prefix}', so that specifying just `--prefix' will affect all of the other directory specifications that were not explicitly provided. The most portable way to affect installation locations is to pass the correct locations to `configure'; however, many packages provide one or both of the following shortcuts of passing variable assignments to the `make install' command line to change installation locations without having to reconfigure or recompile. The first method involves providing an override variable for each affected directory. For example, `make install prefix=/alternate/directory' will choose an alternate location for all directory configuration variables that were expressed in terms of `${prefix}'. Any directories that were specified during `configure', but not in terms of `${prefix}', must each be overridden at install time for the entire installation to be relocated. The approach of makefile variable overrides for each directory variable is required by the GNU Coding Standards, and ideally causes no recompilation. However, some platforms have known limitations with the semantics of shared libraries that end up requiring recompilation when using this method, particularly noticeable in packages that use GNU Libtool. The second method involves providing the `DESTDIR' variable. For example, `make install DESTDIR=/alternate/directory' will prepend `/alternate/directory' before all installation names. The approach of `DESTDIR' overrides is not required by the GNU Coding Standards, and does not work on platforms that have drive letters. On the other hand, it does better at avoiding recompilation issues, and works well even when some directory options were not specified in terms of `${prefix}' at `configure' time. Optional Features ================= If the package supports it, you can cause programs to be installed with an extra prefix or suffix on their names by giving `configure' the option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. Some packages pay attention to `--enable-FEATURE' options to `configure', where FEATURE indicates an optional part of the package. They may also pay attention to `--with-PACKAGE' options, where PACKAGE is something like `gnu-as' or `x' (for the X Window System). The `README' should mention any `--enable-' and `--with-' options that the package recognizes. For packages that use the X Window System, `configure' can usually find the X include and library files automatically, but if it doesn't, you can use the `configure' options `--x-includes=DIR' and `--x-libraries=DIR' to specify their locations. Some packages offer the ability to configure how verbose the execution of `make' will be. For these packages, running `./configure --enable-silent-rules' sets the default to minimal output, which can be overridden with `make V=1'; while running `./configure --disable-silent-rules' sets the default to verbose, which can be overridden with `make V=0'. Particular systems ================== On HP-UX, the default C compiler is not ANSI C compatible. If GNU CC is not installed, it is recommended to use the following options in order to use an ANSI C compiler: ./configure CC="cc -Ae -D_XOPEN_SOURCE=500" and if that doesn't work, install pre-built binaries of GCC for HP-UX. On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot parse its `' header file. The option `-nodtk' can be used as a workaround. If GNU CC is not installed, it is therefore recommended to try ./configure CC="cc" and if that doesn't work, try ./configure CC="cc -nodtk" On Solaris, don't put `/usr/ucb' early in your `PATH'. This directory contains several dysfunctional programs; working variants of these programs are available in `/usr/bin'. So, if you need `/usr/ucb' in your `PATH', put it _after_ `/usr/bin'. On Haiku, software installed for all users goes in `/boot/common', not `/usr/local'. It is recommended to use the following options: ./configure --prefix=/boot/common Specifying the System Type ========================== There may be some features `configure' cannot figure out automatically, but needs to determine by the type of machine the package will run on. Usually, assuming the package is built to be run on the _same_ architectures, `configure' can figure that out, but if it prints a message saying it cannot guess the machine type, give it the `--build=TYPE' option. TYPE can either be a short name for the system type, such as `sun4', or a canonical name which has the form: CPU-COMPANY-SYSTEM where SYSTEM can have one of these forms: OS KERNEL-OS See the file `config.sub' for the possible values of each field. If `config.sub' isn't included in this package, then this package doesn't need to know the machine type. If you are _building_ compiler tools for cross-compiling, you should use the option `--target=TYPE' to select the type of system they will produce code for. If you want to _use_ a cross compiler, that generates code for a platform different from the build platform, you should specify the "host" platform (i.e., that on which the generated programs will eventually be run) with `--host=TYPE'. Sharing Defaults ================ If you want to set default values for `configure' scripts to share, you can create a site shell script called `config.site' that gives default values for variables like `CC', `cache_file', and `prefix'. `configure' looks for `PREFIX/share/config.site' if it exists, then `PREFIX/etc/config.site' if it exists. Or, you can set the `CONFIG_SITE' environment variable to the location of the site script. A warning: not all `configure' scripts look for a site script. Defining Variables ================== Variables not defined in a site shell script can be set in the environment passed to `configure'. However, some packages may run configure again during the build, and the customized values of these variables may be lost. In order to avoid this problem, you should set them in the `configure' command line, using `VAR=value'. For example: ./configure CC=/usr/local2/bin/gcc causes the specified `gcc' to be used as the C compiler (unless it is overridden in the site shell script). Unfortunately, this technique does not work for `CONFIG_SHELL' due to an Autoconf bug. Until the bug is fixed you can use this workaround: CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash `configure' Invocation ====================== `configure' recognizes the following options to control how it operates. `--help' `-h' Print a summary of all of the options to `configure', and exit. `--help=short' `--help=recursive' Print a summary of the options unique to this package's `configure', and exit. The `short' variant lists options used only in the top level, while the `recursive' variant lists options also present in any nested packages. `--version' `-V' Print the version of Autoconf used to generate the `configure' script, and exit. `--cache-file=FILE' Enable the cache: use and save the results of the tests in FILE, traditionally `config.cache'. FILE defaults to `/dev/null' to disable caching. `--config-cache' `-C' Alias for `--cache-file=config.cache'. `--quiet' `--silent' `-q' Do not print messages saying which checks are being made. To suppress all normal output, redirect it to `/dev/null' (any error messages will still be shown). `--srcdir=DIR' Look for the package's source code in directory DIR. Usually `configure' can determine that directory automatically. `--prefix=DIR' Use DIR as the installation prefix. *note Installation Names:: for more details, including other options available for fine-tuning the installation locations. `--no-create' `-n' Run the configure checks, but stop before creating any output files. `configure' also accepts some other, not widely useful, options. Run `configure --help' for more details. netspeed_applet-0.16/ltmain.sh0000755000175000017500000073341511402461224013371 00000000000000# Generated from ltmain.m4sh. # ltmain.sh (GNU libtool) 2.2.6b # Written by Gordon Matzigkeit , 1996 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc. # This is free software; see the source for copying conditions. There is NO # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. # GNU Libtool is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # As a special exception to the GNU General Public License, # if you distribute this file as part of a program or library that # is built using GNU Libtool, you may include this file under the # same distribution terms that you use for the rest of that program. # # GNU Libtool is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with GNU Libtool; see the file COPYING. If not, a copy # can be downloaded from http://www.gnu.org/licenses/gpl.html, # or obtained by writing to the Free Software Foundation, Inc., # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. # Usage: $progname [OPTION]... [MODE-ARG]... # # Provide generalized library-building support services. # # --config show all configuration variables # --debug enable verbose shell tracing # -n, --dry-run display commands without modifying any files # --features display basic configuration information and exit # --mode=MODE use operation mode MODE # --preserve-dup-deps don't remove duplicate dependency libraries # --quiet, --silent don't print informational messages # --tag=TAG use configuration variables from tag TAG # -v, --verbose print informational messages (default) # --version print version information # -h, --help print short or long help message # # MODE must be one of the following: # # clean remove files from the build directory # compile compile a source file into a libtool object # execute automatically set library path, then run a program # finish complete the installation of libtool libraries # install install libraries or executables # link create a library or an executable # uninstall remove libraries from an installed directory # # MODE-ARGS vary depending on the MODE. # Try `$progname --help --mode=MODE' for a more detailed description of MODE. # # When reporting a bug, please describe a test case to reproduce it and # include the following information: # # host-triplet: $host # shell: $SHELL # compiler: $LTCC # compiler flags: $LTCFLAGS # linker: $LD (gnu? $with_gnu_ld) # $progname: (GNU libtool) 2.2.6b Debian-2.2.6b-2ubuntu1 # automake: $automake_version # autoconf: $autoconf_version # # Report bugs to . PROGRAM=ltmain.sh PACKAGE=libtool VERSION="2.2.6b Debian-2.2.6b-2ubuntu1" TIMESTAMP="" package_revision=1.3017 # Be Bourne compatible if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac fi BIN_SH=xpg4; export BIN_SH # for Tru64 DUALCASE=1; export DUALCASE # for MKS sh # NLS nuisances: We save the old values to restore during execute mode. # Only set LANG and LC_ALL to C if already set. # These must not be set unconditionally because not all systems understand # e.g. LANG=C (notably SCO). lt_user_locale= lt_safe_locale= for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES do eval "if test \"\${$lt_var+set}\" = set; then save_$lt_var=\$$lt_var $lt_var=C export $lt_var lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\" lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\" fi" done $lt_unset CDPATH : ${CP="cp -f"} : ${ECHO="echo"} : ${EGREP="/bin/grep -E"} : ${FGREP="/bin/grep -F"} : ${GREP="/bin/grep"} : ${LN_S="ln -s"} : ${MAKE="make"} : ${MKDIR="mkdir"} : ${MV="mv -f"} : ${RM="rm -f"} : ${SED="/bin/sed"} : ${SHELL="${CONFIG_SHELL-/bin/sh}"} : ${Xsed="$SED -e 1s/^X//"} # Global variables: EXIT_SUCCESS=0 EXIT_FAILURE=1 EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing. EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake. exit_status=$EXIT_SUCCESS # Make sure IFS has a sensible default lt_nl=' ' IFS=" $lt_nl" dirname="s,/[^/]*$,," basename="s,^.*/,," # func_dirname_and_basename file append nondir_replacement # perform func_basename and func_dirname in a single function # call: # dirname: Compute the dirname of FILE. If nonempty, # add APPEND to the result, otherwise set result # to NONDIR_REPLACEMENT. # value returned in "$func_dirname_result" # basename: Compute filename of FILE. # value retuned in "$func_basename_result" # Implementation must be kept synchronized with func_dirname # and func_basename. For efficiency, we do not delegate to # those functions but instead duplicate the functionality here. func_dirname_and_basename () { # Extract subdirectory from the argument. func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` if test "X$func_dirname_result" = "X${1}"; then func_dirname_result="${3}" else func_dirname_result="$func_dirname_result${2}" fi func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` } # Generated shell functions inserted here. # Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh # is ksh but when the shell is invoked as "sh" and the current value of # the _XPG environment variable is not equal to 1 (one), the special # positional parameter $0, within a function call, is the name of the # function. progpath="$0" # The name of this program: # In the unlikely event $progname began with a '-', it would play havoc with # func_echo (imagine progname=-n), so we prepend ./ in that case: func_dirname_and_basename "$progpath" progname=$func_basename_result case $progname in -*) progname=./$progname ;; esac # Make sure we have an absolute path for reexecution: case $progpath in [\\/]*|[A-Za-z]:\\*) ;; *[\\/]*) progdir=$func_dirname_result progdir=`cd "$progdir" && pwd` progpath="$progdir/$progname" ;; *) save_IFS="$IFS" IFS=: for progdir in $PATH; do IFS="$save_IFS" test -x "$progdir/$progname" && break done IFS="$save_IFS" test -n "$progdir" || progdir=`pwd` progpath="$progdir/$progname" ;; esac # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. Xsed="${SED}"' -e 1s/^X//' sed_quote_subst='s/\([`"$\\]\)/\\\1/g' # Same as above, but do not quote variable references. double_quote_subst='s/\(["`\\]\)/\\\1/g' # Re-`\' parameter expansions in output of double_quote_subst that were # `\'-ed in input to the same. If an odd number of `\' preceded a '$' # in input to double_quote_subst, that '$' was protected from expansion. # Since each input `\' is now two `\'s, look for any number of runs of # four `\'s followed by two `\'s and then a '$'. `\' that '$'. bs='\\' bs2='\\\\' bs4='\\\\\\\\' dollar='\$' sed_double_backslash="\ s/$bs4/&\\ /g s/^$bs2$dollar/$bs&/ s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g s/\n//g" # Standard options: opt_dry_run=false opt_help=false opt_quiet=false opt_verbose=false opt_warning=: # func_echo arg... # Echo program name prefixed message, along with the current mode # name if it has been set yet. func_echo () { $ECHO "$progname${mode+: }$mode: $*" } # func_verbose arg... # Echo program name prefixed message in verbose mode only. func_verbose () { $opt_verbose && func_echo ${1+"$@"} # A bug in bash halts the script if the last line of a function # fails when set -e is in force, so we need another command to # work around that: : } # func_error arg... # Echo program name prefixed message to standard error. func_error () { $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2 } # func_warning arg... # Echo program name prefixed warning message to standard error. func_warning () { $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2 # bash bug again: : } # func_fatal_error arg... # Echo program name prefixed message to standard error, and exit. func_fatal_error () { func_error ${1+"$@"} exit $EXIT_FAILURE } # func_fatal_help arg... # Echo program name prefixed message to standard error, followed by # a help hint, and exit. func_fatal_help () { func_error ${1+"$@"} func_fatal_error "$help" } help="Try \`$progname --help' for more information." ## default # func_grep expression filename # Check whether EXPRESSION matches any line of FILENAME, without output. func_grep () { $GREP "$1" "$2" >/dev/null 2>&1 } # func_mkdir_p directory-path # Make sure the entire path to DIRECTORY-PATH is available. func_mkdir_p () { my_directory_path="$1" my_dir_list= if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then # Protect directory names starting with `-' case $my_directory_path in -*) my_directory_path="./$my_directory_path" ;; esac # While some portion of DIR does not yet exist... while test ! -d "$my_directory_path"; do # ...make a list in topmost first order. Use a colon delimited # list incase some portion of path contains whitespace. my_dir_list="$my_directory_path:$my_dir_list" # If the last portion added has no slash in it, the list is done case $my_directory_path in */*) ;; *) break ;; esac # ...otherwise throw away the child directory and loop my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"` done my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'` save_mkdir_p_IFS="$IFS"; IFS=':' for my_dir in $my_dir_list; do IFS="$save_mkdir_p_IFS" # mkdir can fail with a `File exist' error if two processes # try to create one of the directories concurrently. Don't # stop in that case! $MKDIR "$my_dir" 2>/dev/null || : done IFS="$save_mkdir_p_IFS" # Bail out if we (or some other process) failed to create a directory. test -d "$my_directory_path" || \ func_fatal_error "Failed to create \`$1'" fi } # func_mktempdir [string] # Make a temporary directory that won't clash with other running # libtool processes, and avoids race conditions if possible. If # given, STRING is the basename for that directory. func_mktempdir () { my_template="${TMPDIR-/tmp}/${1-$progname}" if test "$opt_dry_run" = ":"; then # Return a directory name, but don't create it in dry-run mode my_tmpdir="${my_template}-$$" else # If mktemp works, use that first and foremost my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` if test ! -d "$my_tmpdir"; then # Failing that, at least try and use $RANDOM to avoid a race my_tmpdir="${my_template}-${RANDOM-0}$$" save_mktempdir_umask=`umask` umask 0077 $MKDIR "$my_tmpdir" umask $save_mktempdir_umask fi # If we're not in dry-run mode, bomb out on failure test -d "$my_tmpdir" || \ func_fatal_error "cannot create temporary directory \`$my_tmpdir'" fi $ECHO "X$my_tmpdir" | $Xsed } # func_quote_for_eval arg # Aesthetically quote ARG to be evaled later. # This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT # is double-quoted, suitable for a subsequent eval, whereas # FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters # which are still active within double quotes backslashified. func_quote_for_eval () { case $1 in *[\\\`\"\$]*) func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;; *) func_quote_for_eval_unquoted_result="$1" ;; esac case $func_quote_for_eval_unquoted_result in # Double-quote args containing shell metacharacters to delay # word splitting, command substitution and and variable # expansion for a subsequent eval. # Many Bourne shells cannot handle close brackets correctly # in scan sets, so we specify it separately. *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\"" ;; *) func_quote_for_eval_result="$func_quote_for_eval_unquoted_result" esac } # func_quote_for_expand arg # Aesthetically quote ARG to be evaled later; same as above, # but do not quote variable references. func_quote_for_expand () { case $1 in *[\\\`\"]*) my_arg=`$ECHO "X$1" | $Xsed \ -e "$double_quote_subst" -e "$sed_double_backslash"` ;; *) my_arg="$1" ;; esac case $my_arg in # Double-quote args containing shell metacharacters to delay # word splitting and command substitution for a subsequent eval. # Many Bourne shells cannot handle close brackets correctly # in scan sets, so we specify it separately. *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") my_arg="\"$my_arg\"" ;; esac func_quote_for_expand_result="$my_arg" } # func_show_eval cmd [fail_exp] # Unless opt_silent is true, then output CMD. Then, if opt_dryrun is # not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP # is given, then evaluate it. func_show_eval () { my_cmd="$1" my_fail_exp="${2-:}" ${opt_silent-false} || { func_quote_for_expand "$my_cmd" eval "func_echo $func_quote_for_expand_result" } if ${opt_dry_run-false}; then :; else eval "$my_cmd" my_status=$? if test "$my_status" -eq 0; then :; else eval "(exit $my_status); $my_fail_exp" fi fi } # func_show_eval_locale cmd [fail_exp] # Unless opt_silent is true, then output CMD. Then, if opt_dryrun is # not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP # is given, then evaluate it. Use the saved locale for evaluation. func_show_eval_locale () { my_cmd="$1" my_fail_exp="${2-:}" ${opt_silent-false} || { func_quote_for_expand "$my_cmd" eval "func_echo $func_quote_for_expand_result" } if ${opt_dry_run-false}; then :; else eval "$lt_user_locale $my_cmd" my_status=$? eval "$lt_safe_locale" if test "$my_status" -eq 0; then :; else eval "(exit $my_status); $my_fail_exp" fi fi } # func_version # Echo version message to standard output and exit. func_version () { $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / { s/^# // s/^# *$// s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/ p }' < "$progpath" exit $? } # func_usage # Echo short help message to standard output and exit. func_usage () { $SED -n '/^# Usage:/,/# -h/ { s/^# // s/^# *$// s/\$progname/'$progname'/ p }' < "$progpath" $ECHO $ECHO "run \`$progname --help | more' for full usage" exit $? } # func_help # Echo long help message to standard output and exit. func_help () { $SED -n '/^# Usage:/,/# Report bugs to/ { s/^# // s/^# *$// s*\$progname*'$progname'* s*\$host*'"$host"'* s*\$SHELL*'"$SHELL"'* s*\$LTCC*'"$LTCC"'* s*\$LTCFLAGS*'"$LTCFLAGS"'* s*\$LD*'"$LD"'* s/\$with_gnu_ld/'"$with_gnu_ld"'/ s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/ s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/ p }' < "$progpath" exit $? } # func_missing_arg argname # Echo program name prefixed message to standard error and set global # exit_cmd. func_missing_arg () { func_error "missing argument for $1" exit_cmd=exit } exit_cmd=: # Check that we have a working $ECHO. if test "X$1" = X--no-reexec; then # Discard the --no-reexec flag, and continue. shift elif test "X$1" = X--fallback-echo; then # Avoid inline document here, it may be left over : elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then # Yippee, $ECHO works! : else # Restart under the correct shell, and then maybe $ECHO will work. exec $SHELL "$progpath" --no-reexec ${1+"$@"} fi if test "X$1" = X--fallback-echo; then # used as fallback echo shift cat </dev/null 2>&1; then taglist="$taglist $tagname" # Evaluate the configuration. Be careful to quote the path # and the sed script, to avoid splitting on whitespace, but # also don't use non-portable quotes within backquotes within # quotes we have to do it in 2 steps: extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"` eval "$extractedcf" else func_error "ignoring unknown tag $tagname" fi ;; esac } # Parse options once, thoroughly. This comes as soon as possible in # the script to make things like `libtool --version' happen quickly. { # Shorthand for --mode=foo, only valid as the first argument case $1 in clean|clea|cle|cl) shift; set dummy --mode clean ${1+"$@"}; shift ;; compile|compil|compi|comp|com|co|c) shift; set dummy --mode compile ${1+"$@"}; shift ;; execute|execut|execu|exec|exe|ex|e) shift; set dummy --mode execute ${1+"$@"}; shift ;; finish|finis|fini|fin|fi|f) shift; set dummy --mode finish ${1+"$@"}; shift ;; install|instal|insta|inst|ins|in|i) shift; set dummy --mode install ${1+"$@"}; shift ;; link|lin|li|l) shift; set dummy --mode link ${1+"$@"}; shift ;; uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) shift; set dummy --mode uninstall ${1+"$@"}; shift ;; esac # Parse non-mode specific arguments: while test "$#" -gt 0; do opt="$1" shift case $opt in --config) func_config ;; --debug) preserve_args="$preserve_args $opt" func_echo "enabling shell trace mode" opt_debug='set -x' $opt_debug ;; -dlopen) test "$#" -eq 0 && func_missing_arg "$opt" && break execute_dlfiles="$execute_dlfiles $1" shift ;; --dry-run | -n) opt_dry_run=: ;; --features) func_features ;; --finish) mode="finish" ;; --mode) test "$#" -eq 0 && func_missing_arg "$opt" && break case $1 in # Valid mode arguments: clean) ;; compile) ;; execute) ;; finish) ;; install) ;; link) ;; relink) ;; uninstall) ;; # Catch anything else as an error *) func_error "invalid argument for $opt" exit_cmd=exit break ;; esac mode="$1" shift ;; --preserve-dup-deps) opt_duplicate_deps=: ;; --quiet|--silent) preserve_args="$preserve_args $opt" opt_silent=: ;; --verbose| -v) preserve_args="$preserve_args $opt" opt_silent=false ;; --tag) test "$#" -eq 0 && func_missing_arg "$opt" && break preserve_args="$preserve_args $opt $1" func_enable_tag "$1" # tagname is set here shift ;; # Separate optargs to long options: -dlopen=*|--mode=*|--tag=*) func_opt_split "$opt" set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"} shift ;; -\?|-h) func_usage ;; --help) opt_help=: ;; --version) func_version ;; -*) func_fatal_help "unrecognized option \`$opt'" ;; *) nonopt="$opt" break ;; esac done case $host in *cygwin* | *mingw* | *pw32* | *cegcc*) # don't eliminate duplications in $postdeps and $predeps opt_duplicate_compiler_generated_deps=: ;; *) opt_duplicate_compiler_generated_deps=$opt_duplicate_deps ;; esac # Having warned about all mis-specified options, bail out if # anything was wrong. $exit_cmd $EXIT_FAILURE } # func_check_version_match # Ensure that we are using m4 macros, and libtool script from the same # release of libtool. func_check_version_match () { if test "$package_revision" != "$macro_revision"; then if test "$VERSION" != "$macro_version"; then if test -z "$macro_version"; then cat >&2 <<_LT_EOF $progname: Version mismatch error. This is $PACKAGE $VERSION, but the $progname: definition of this LT_INIT comes from an older release. $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION $progname: and run autoconf again. _LT_EOF else cat >&2 <<_LT_EOF $progname: Version mismatch error. This is $PACKAGE $VERSION, but the $progname: definition of this LT_INIT comes from $PACKAGE $macro_version. $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION $progname: and run autoconf again. _LT_EOF fi else cat >&2 <<_LT_EOF $progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, $progname: but the definition of this LT_INIT comes from revision $macro_revision. $progname: You should recreate aclocal.m4 with macros from revision $package_revision $progname: of $PACKAGE $VERSION and run autoconf again. _LT_EOF fi exit $EXIT_MISMATCH fi } ## ----------- ## ## Main. ## ## ----------- ## $opt_help || { # Sanity checks first: func_check_version_match if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then func_fatal_configuration "not configured to build any kind of library" fi test -z "$mode" && func_fatal_error "error: you must specify a MODE." # Darwin sucks eval std_shrext=\"$shrext_cmds\" # Only execute mode is allowed to have -dlopen flags. if test -n "$execute_dlfiles" && test "$mode" != execute; then func_error "unrecognized option \`-dlopen'" $ECHO "$help" 1>&2 exit $EXIT_FAILURE fi # Change the help message to a mode-specific one. generic_help="$help" help="Try \`$progname --help --mode=$mode' for more information." } # func_lalib_p file # True iff FILE is a libtool `.la' library or `.lo' object file. # This function is only a basic sanity check; it will hardly flush out # determined imposters. func_lalib_p () { test -f "$1" && $SED -e 4q "$1" 2>/dev/null \ | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1 } # func_lalib_unsafe_p file # True iff FILE is a libtool `.la' library or `.lo' object file. # This function implements the same check as func_lalib_p without # resorting to external programs. To this end, it redirects stdin and # closes it afterwards, without saving the original file descriptor. # As a safety measure, use it only where a negative result would be # fatal anyway. Works if `file' does not exist. func_lalib_unsafe_p () { lalib_p=no if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then for lalib_p_l in 1 2 3 4 do read lalib_p_line case "$lalib_p_line" in \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;; esac done exec 0<&5 5<&- fi test "$lalib_p" = yes } # func_ltwrapper_script_p file # True iff FILE is a libtool wrapper script # This function is only a basic sanity check; it will hardly flush out # determined imposters. func_ltwrapper_script_p () { func_lalib_p "$1" } # func_ltwrapper_executable_p file # True iff FILE is a libtool wrapper executable # This function is only a basic sanity check; it will hardly flush out # determined imposters. func_ltwrapper_executable_p () { func_ltwrapper_exec_suffix= case $1 in *.exe) ;; *) func_ltwrapper_exec_suffix=.exe ;; esac $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1 } # func_ltwrapper_scriptname file # Assumes file is an ltwrapper_executable # uses $file to determine the appropriate filename for a # temporary ltwrapper_script. func_ltwrapper_scriptname () { func_ltwrapper_scriptname_result="" if func_ltwrapper_executable_p "$1"; then func_dirname_and_basename "$1" "" "." func_stripname '' '.exe' "$func_basename_result" func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper" fi } # func_ltwrapper_p file # True iff FILE is a libtool wrapper script or wrapper executable # This function is only a basic sanity check; it will hardly flush out # determined imposters. func_ltwrapper_p () { func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1" } # func_execute_cmds commands fail_cmd # Execute tilde-delimited COMMANDS. # If FAIL_CMD is given, eval that upon failure. # FAIL_CMD may read-access the current command in variable CMD! func_execute_cmds () { $opt_debug save_ifs=$IFS; IFS='~' for cmd in $1; do IFS=$save_ifs eval cmd=\"$cmd\" func_show_eval "$cmd" "${2-:}" done IFS=$save_ifs } # func_source file # Source FILE, adding directory component if necessary. # Note that it is not necessary on cygwin/mingw to append a dot to # FILE even if both FILE and FILE.exe exist: automatic-append-.exe # behavior happens only for exec(3), not for open(2)! Also, sourcing # `FILE.' does not work on cygwin managed mounts. func_source () { $opt_debug case $1 in */* | *\\*) . "$1" ;; *) . "./$1" ;; esac } # func_infer_tag arg # Infer tagged configuration to use if any are available and # if one wasn't chosen via the "--tag" command line option. # Only attempt this if the compiler in the base compile # command doesn't match the default compiler. # arg is usually of the form 'gcc ...' func_infer_tag () { $opt_debug if test -n "$available_tags" && test -z "$tagname"; then CC_quoted= for arg in $CC; do func_quote_for_eval "$arg" CC_quoted="$CC_quoted $func_quote_for_eval_result" done case $@ in # Blanks in the command may have been stripped by the calling shell, # but not from the CC environment variable when configure was run. " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;; # Blanks at the start of $base_compile will cause this to fail # if we don't check for them as well. *) for z in $available_tags; do if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then # Evaluate the configuration. eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" CC_quoted= for arg in $CC; do # Double-quote args containing other shell metacharacters. func_quote_for_eval "$arg" CC_quoted="$CC_quoted $func_quote_for_eval_result" done case "$@ " in " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) # The compiler in the base compile command matches # the one in the tagged configuration. # Assume this is the tagged configuration we want. tagname=$z break ;; esac fi done # If $tagname still isn't set, then no tagged configuration # was found and let the user know that the "--tag" command # line option must be used. if test -z "$tagname"; then func_echo "unable to infer tagged configuration" func_fatal_error "specify a tag with \`--tag'" # else # func_verbose "using $tagname tagged configuration" fi ;; esac fi } # func_write_libtool_object output_name pic_name nonpic_name # Create a libtool object file (analogous to a ".la" file), # but don't create it if we're doing a dry run. func_write_libtool_object () { write_libobj=${1} if test "$build_libtool_libs" = yes; then write_lobj=\'${2}\' else write_lobj=none fi if test "$build_old_libs" = yes; then write_oldobj=\'${3}\' else write_oldobj=none fi $opt_dry_run || { cat >${write_libobj}T <?"'"'"' &()|`$[]' \ && func_warning "libobj name \`$libobj' may not contain shell special characters." func_dirname_and_basename "$obj" "/" "" objname="$func_basename_result" xdir="$func_dirname_result" lobj=${xdir}$objdir/$objname test -z "$base_compile" && \ func_fatal_help "you must specify a compilation command" # Delete any leftover library objects. if test "$build_old_libs" = yes; then removelist="$obj $lobj $libobj ${libobj}T" else removelist="$lobj $libobj ${libobj}T" fi # On Cygwin there's no "real" PIC flag so we must build both object types case $host_os in cygwin* | mingw* | pw32* | os2* | cegcc*) pic_mode=default ;; esac if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then # non-PIC code in shared libraries is not supported pic_mode=default fi # Calculate the filename of the output object if compiler does # not support -o with -c if test "$compiler_c_o" = no; then output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} lockfile="$output_obj.lock" else output_obj= need_locks=no lockfile= fi # Lock this critical section if it is needed # We use this script file to make the link, it avoids creating a new file if test "$need_locks" = yes; then until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do func_echo "Waiting for $lockfile to be removed" sleep 2 done elif test "$need_locks" = warn; then if test -f "$lockfile"; then $ECHO "\ *** ERROR, $lockfile exists and contains: `cat $lockfile 2>/dev/null` This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support \`-c' and \`-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $opt_dry_run || $RM $removelist exit $EXIT_FAILURE fi removelist="$removelist $output_obj" $ECHO "$srcfile" > "$lockfile" fi $opt_dry_run || $RM $removelist removelist="$removelist $lockfile" trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15 if test -n "$fix_srcfile_path"; then eval srcfile=\"$fix_srcfile_path\" fi func_quote_for_eval "$srcfile" qsrcfile=$func_quote_for_eval_result # Only build a PIC object if we are building libtool libraries. if test "$build_libtool_libs" = yes; then # Without this assignment, base_compile gets emptied. fbsd_hideous_sh_bug=$base_compile if test "$pic_mode" != no; then command="$base_compile $qsrcfile $pic_flag" else # Don't build PIC code command="$base_compile $qsrcfile" fi func_mkdir_p "$xdir$objdir" if test -z "$output_obj"; then # Place PIC objects in $objdir command="$command -o $lobj" fi func_show_eval_locale "$command" \ 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE' if test "$need_locks" = warn && test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then $ECHO "\ *** ERROR, $lockfile contains: `cat $lockfile 2>/dev/null` but it should contain: $srcfile This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support \`-c' and \`-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $opt_dry_run || $RM $removelist exit $EXIT_FAILURE fi # Just move the object if needed, then go on to compile the next one if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then func_show_eval '$MV "$output_obj" "$lobj"' \ 'error=$?; $opt_dry_run || $RM $removelist; exit $error' fi # Allow error messages only from the first compilation. if test "$suppress_opt" = yes; then suppress_output=' >/dev/null 2>&1' fi fi # Only build a position-dependent object if we build old libraries. if test "$build_old_libs" = yes; then if test "$pic_mode" != yes; then # Don't build PIC code command="$base_compile $qsrcfile$pie_flag" else command="$base_compile $qsrcfile $pic_flag" fi if test "$compiler_c_o" = yes; then command="$command -o $obj" fi # Suppress compiler output if we already did a PIC compilation. command="$command$suppress_output" func_show_eval_locale "$command" \ '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' if test "$need_locks" = warn && test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then $ECHO "\ *** ERROR, $lockfile contains: `cat $lockfile 2>/dev/null` but it should contain: $srcfile This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support \`-c' and \`-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $opt_dry_run || $RM $removelist exit $EXIT_FAILURE fi # Just move the object if needed if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then func_show_eval '$MV "$output_obj" "$obj"' \ 'error=$?; $opt_dry_run || $RM $removelist; exit $error' fi fi $opt_dry_run || { func_write_libtool_object "$libobj" "$objdir/$objname" "$objname" # Unlock the critical section if it was locked if test "$need_locks" != no; then removelist=$lockfile $RM "$lockfile" fi } exit $EXIT_SUCCESS } $opt_help || { test "$mode" = compile && func_mode_compile ${1+"$@"} } func_mode_help () { # We need to display help for each of the modes. case $mode in "") # Generic help is extracted from the usage comments # at the start of this file. func_help ;; clean) $ECHO \ "Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE... Remove files from the build directory. RM is the name of the program to use to delete files associated with each FILE (typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed to RM. If FILE is a libtool library, object or program, all the files associated with it are deleted. Otherwise, only FILE itself is deleted using RM." ;; compile) $ECHO \ "Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE Compile a source file into a libtool library object. This mode accepts the following additional options: -o OUTPUT-FILE set the output file name to OUTPUT-FILE -no-suppress do not suppress compiler output for multiple passes -prefer-pic try to building PIC objects only -prefer-non-pic try to building non-PIC objects only -shared do not build a \`.o' file suitable for static linking -static only build a \`.o' file suitable for static linking COMPILE-COMMAND is a command to be used in creating a \`standard' object file from the given SOURCEFILE. The output file name is determined by removing the directory component from SOURCEFILE, then substituting the C source code suffix \`.c' with the library object suffix, \`.lo'." ;; execute) $ECHO \ "Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]... Automatically set library path, then run a program. This mode accepts the following additional options: -dlopen FILE add the directory containing FILE to the library path This mode sets the library path environment variable according to \`-dlopen' flags. If any of the ARGS are libtool executable wrappers, then they are translated into their corresponding uninstalled binary, and any of their required library directories are added to the library path. Then, COMMAND is executed, with ARGS as arguments." ;; finish) $ECHO \ "Usage: $progname [OPTION]... --mode=finish [LIBDIR]... Complete the installation of libtool libraries. Each LIBDIR is a directory that contains libtool libraries. The commands that this mode executes may require superuser privileges. Use the \`--dry-run' option if you just want to see what would be executed." ;; install) $ECHO \ "Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND... Install executables or libraries. INSTALL-COMMAND is the installation command. The first component should be either the \`install' or \`cp' program. The following components of INSTALL-COMMAND are treated specially: -inst-prefix PREFIX-DIR Use PREFIX-DIR as a staging area for installation The rest of the components are interpreted as arguments to that command (only BSD-compatible install options are recognized)." ;; link) $ECHO \ "Usage: $progname [OPTION]... --mode=link LINK-COMMAND... Link object files or libraries together to form another library, or to create an executable program. LINK-COMMAND is a command using the C compiler that you would use to create a program from several object files. The following components of LINK-COMMAND are treated specially: -all-static do not do any dynamic linking at all -avoid-version do not add a version suffix if possible -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) -export-symbols SYMFILE try to export only the symbols listed in SYMFILE -export-symbols-regex REGEX try to export only the symbols matching REGEX -LLIBDIR search LIBDIR for required installed libraries -lNAME OUTPUT-FILE requires the installed library libNAME -module build a library that can dlopened -no-fast-install disable the fast-install mode -no-install link a not-installable executable -no-undefined declare that a library does not refer to external symbols -o OUTPUT-FILE create OUTPUT-FILE from the specified objects -objectlist FILE Use a list of object files found in FILE to specify objects -precious-files-regex REGEX don't remove output files matching REGEX -release RELEASE specify package release information -rpath LIBDIR the created library will eventually be installed in LIBDIR -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries -shared only do dynamic linking of libtool libraries -shrext SUFFIX override the standard shared library file extension -static do not do any dynamic linking of uninstalled libtool libraries -static-libtool-libs do not do any dynamic linking of libtool libraries -version-info CURRENT[:REVISION[:AGE]] specify library version info [each variable defaults to 0] -weak LIBNAME declare that the target provides the LIBNAME interface All other options (arguments beginning with \`-') are ignored. Every other argument is treated as a filename. Files ending in \`.la' are treated as uninstalled libtool libraries, other files are standard or library object files. If the OUTPUT-FILE ends in \`.la', then a libtool library is created, only library objects (\`.lo' files) may be specified, and \`-rpath' is required, except when creating a convenience library. If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created using \`ar' and \`ranlib', or on Windows using \`lib'. If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file is created, otherwise an executable program is created." ;; uninstall) $ECHO \ "Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... Remove libraries from an installation directory. RM is the name of the program to use to delete files associated with each FILE (typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed to RM. If FILE is a libtool library, all the files associated with it are deleted. Otherwise, only FILE itself is deleted using RM." ;; *) func_fatal_help "invalid operation mode \`$mode'" ;; esac $ECHO $ECHO "Try \`$progname --help' for more information about other modes." exit $? } # Now that we've collected a possible --mode arg, show help if necessary $opt_help && func_mode_help # func_mode_execute arg... func_mode_execute () { $opt_debug # The first argument is the command name. cmd="$nonopt" test -z "$cmd" && \ func_fatal_help "you must specify a COMMAND" # Handle -dlopen flags immediately. for file in $execute_dlfiles; do test -f "$file" \ || func_fatal_help "\`$file' is not a file" dir= case $file in *.la) # Check to see that this really is a libtool archive. func_lalib_unsafe_p "$file" \ || func_fatal_help "\`$lib' is not a valid libtool archive" # Read the libtool library. dlname= library_names= func_source "$file" # Skip this library if it cannot be dlopened. if test -z "$dlname"; then # Warn if it was a shared library. test -n "$library_names" && \ func_warning "\`$file' was not linked with \`-export-dynamic'" continue fi func_dirname "$file" "" "." dir="$func_dirname_result" if test -f "$dir/$objdir/$dlname"; then dir="$dir/$objdir" else if test ! -f "$dir/$dlname"; then func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" fi fi ;; *.lo) # Just add the directory containing the .lo file. func_dirname "$file" "" "." dir="$func_dirname_result" ;; *) func_warning "\`-dlopen' is ignored for non-libtool libraries and objects" continue ;; esac # Get the absolute pathname. absdir=`cd "$dir" && pwd` test -n "$absdir" && dir="$absdir" # Now add the directory to shlibpath_var. if eval "test -z \"\$$shlibpath_var\""; then eval "$shlibpath_var=\"\$dir\"" else eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" fi done # This variable tells wrapper scripts just to set shlibpath_var # rather than running their programs. libtool_execute_magic="$magic" # Check if any of the arguments is a wrapper script. args= for file do case $file in -*) ;; *) # Do a test to see if this is really a libtool program. if func_ltwrapper_script_p "$file"; then func_source "$file" # Transform arg to wrapped name. file="$progdir/$program" elif func_ltwrapper_executable_p "$file"; then func_ltwrapper_scriptname "$file" func_source "$func_ltwrapper_scriptname_result" # Transform arg to wrapped name. file="$progdir/$program" fi ;; esac # Quote arguments (to preserve shell metacharacters). func_quote_for_eval "$file" args="$args $func_quote_for_eval_result" done if test "X$opt_dry_run" = Xfalse; then if test -n "$shlibpath_var"; then # Export the shlibpath_var. eval "export $shlibpath_var" fi # Restore saved environment variables for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES do eval "if test \"\${save_$lt_var+set}\" = set; then $lt_var=\$save_$lt_var; export $lt_var else $lt_unset $lt_var fi" done # Now prepare to actually exec the command. exec_cmd="\$cmd$args" else # Display what would be done. if test -n "$shlibpath_var"; then eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" $ECHO "export $shlibpath_var" fi $ECHO "$cmd$args" exit $EXIT_SUCCESS fi } test "$mode" = execute && func_mode_execute ${1+"$@"} # func_mode_finish arg... func_mode_finish () { $opt_debug libdirs="$nonopt" admincmds= if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then for dir do libdirs="$libdirs $dir" done for libdir in $libdirs; do if test -n "$finish_cmds"; then # Do each command in the finish commands. func_execute_cmds "$finish_cmds" 'admincmds="$admincmds '"$cmd"'"' fi if test -n "$finish_eval"; then # Do the single finish_eval. eval cmds=\"$finish_eval\" $opt_dry_run || eval "$cmds" || admincmds="$admincmds $cmds" fi done fi # Exit here if they wanted silent mode. $opt_silent && exit $EXIT_SUCCESS $ECHO "X----------------------------------------------------------------------" | $Xsed $ECHO "Libraries have been installed in:" for libdir in $libdirs; do $ECHO " $libdir" done $ECHO $ECHO "If you ever happen to want to link against installed libraries" $ECHO "in a given directory, LIBDIR, you must either use libtool, and" $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'" $ECHO "flag during linking and do at least one of the following:" if test -n "$shlibpath_var"; then $ECHO " - add LIBDIR to the \`$shlibpath_var' environment variable" $ECHO " during execution" fi if test -n "$runpath_var"; then $ECHO " - add LIBDIR to the \`$runpath_var' environment variable" $ECHO " during linking" fi if test -n "$hardcode_libdir_flag_spec"; then libdir=LIBDIR eval flag=\"$hardcode_libdir_flag_spec\" $ECHO " - use the \`$flag' linker flag" fi if test -n "$admincmds"; then $ECHO " - have your system administrator run these commands:$admincmds" fi if test -f /etc/ld.so.conf; then $ECHO " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" fi $ECHO $ECHO "See any operating system documentation about shared libraries for" case $host in solaris2.[6789]|solaris2.1[0-9]) $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual" $ECHO "pages." ;; *) $ECHO "more information, such as the ld(1) and ld.so(8) manual pages." ;; esac $ECHO "X----------------------------------------------------------------------" | $Xsed exit $EXIT_SUCCESS } test "$mode" = finish && func_mode_finish ${1+"$@"} # func_mode_install arg... func_mode_install () { $opt_debug # There may be an optional sh(1) argument at the beginning of # install_prog (especially on Windows NT). if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || # Allow the use of GNU shtool's install command. $ECHO "X$nonopt" | $GREP shtool >/dev/null; then # Aesthetically quote it. func_quote_for_eval "$nonopt" install_prog="$func_quote_for_eval_result " arg=$1 shift else install_prog= arg=$nonopt fi # The real first argument should be the name of the installation program. # Aesthetically quote it. func_quote_for_eval "$arg" install_prog="$install_prog$func_quote_for_eval_result" # We need to accept at least all the BSD install flags. dest= files= opts= prev= install_type= isdir=no stripme= for arg do if test -n "$dest"; then files="$files $dest" dest=$arg continue fi case $arg in -d) isdir=yes ;; -f) case " $install_prog " in *[\\\ /]cp\ *) ;; *) prev=$arg ;; esac ;; -g | -m | -o) prev=$arg ;; -s) stripme=" -s" continue ;; -*) ;; *) # If the previous option needed an argument, then skip it. if test -n "$prev"; then prev= else dest=$arg continue fi ;; esac # Aesthetically quote the argument. func_quote_for_eval "$arg" install_prog="$install_prog $func_quote_for_eval_result" done test -z "$install_prog" && \ func_fatal_help "you must specify an install program" test -n "$prev" && \ func_fatal_help "the \`$prev' option requires an argument" if test -z "$files"; then if test -z "$dest"; then func_fatal_help "no file or destination specified" else func_fatal_help "you must specify a destination" fi fi # Strip any trailing slash from the destination. func_stripname '' '/' "$dest" dest=$func_stripname_result # Check to see that the destination is a directory. test -d "$dest" && isdir=yes if test "$isdir" = yes; then destdir="$dest" destname= else func_dirname_and_basename "$dest" "" "." destdir="$func_dirname_result" destname="$func_basename_result" # Not a directory, so check to see that there is only one file specified. set dummy $files; shift test "$#" -gt 1 && \ func_fatal_help "\`$dest' is not a directory" fi case $destdir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) for file in $files; do case $file in *.lo) ;; *) func_fatal_help "\`$destdir' must be an absolute directory name" ;; esac done ;; esac # This variable tells wrapper scripts just to set variables rather # than running their programs. libtool_install_magic="$magic" staticlibs= future_libdirs= current_libdirs= for file in $files; do # Do each installation. case $file in *.$libext) # Do the static libraries later. staticlibs="$staticlibs $file" ;; *.la) # Check to see that this really is a libtool archive. func_lalib_unsafe_p "$file" \ || func_fatal_help "\`$file' is not a valid libtool archive" library_names= old_library= relink_command= func_source "$file" # Add the libdir to current_libdirs if it is the destination. if test "X$destdir" = "X$libdir"; then case "$current_libdirs " in *" $libdir "*) ;; *) current_libdirs="$current_libdirs $libdir" ;; esac else # Note the libdir as a future libdir. case "$future_libdirs " in *" $libdir "*) ;; *) future_libdirs="$future_libdirs $libdir" ;; esac fi func_dirname "$file" "/" "" dir="$func_dirname_result" dir="$dir$objdir" if test -n "$relink_command"; then # Determine the prefix the user has applied to our future dir. inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"` # Don't allow the user to place us outside of our expected # location b/c this prevents finding dependent libraries that # are installed to the same prefix. # At present, this check doesn't affect windows .dll's that # are installed into $libdir/../bin (currently, that works fine) # but it's something to keep an eye on. test "$inst_prefix_dir" = "$destdir" && \ func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir" if test -n "$inst_prefix_dir"; then # Stick the inst_prefix_dir data into the link command. relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` else relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"` fi func_warning "relinking \`$file'" func_show_eval "$relink_command" \ 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"' fi # See the names of the shared library. set dummy $library_names; shift if test -n "$1"; then realname="$1" shift srcname="$realname" test -n "$relink_command" && srcname="$realname"T # Install the shared library and build the symlinks. func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \ 'exit $?' tstripme="$stripme" case $host_os in cygwin* | mingw* | pw32* | cegcc*) case $realname in *.dll.a) tstripme="" ;; esac ;; esac if test -n "$tstripme" && test -n "$striplib"; then func_show_eval "$striplib $destdir/$realname" 'exit $?' fi if test "$#" -gt 0; then # Delete the old symlinks, and create new ones. # Try `ln -sf' first, because the `ln' binary might depend on # the symlink we replace! Solaris /bin/ln does not understand -f, # so we also need to try rm && ln -s. for linkname do test "$linkname" != "$realname" \ && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })" done fi # Do each command in the postinstall commands. lib="$destdir/$realname" func_execute_cmds "$postinstall_cmds" 'exit $?' fi # Install the pseudo-library for information purposes. func_basename "$file" name="$func_basename_result" instname="$dir/$name"i func_show_eval "$install_prog $instname $destdir/$name" 'exit $?' # Maybe install the static library, too. test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" ;; *.lo) # Install (i.e. copy) a libtool object. # Figure out destination file name, if it wasn't already specified. if test -n "$destname"; then destfile="$destdir/$destname" else func_basename "$file" destfile="$func_basename_result" destfile="$destdir/$destfile" fi # Deduce the name of the destination old-style object file. case $destfile in *.lo) func_lo2o "$destfile" staticdest=$func_lo2o_result ;; *.$objext) staticdest="$destfile" destfile= ;; *) func_fatal_help "cannot copy a libtool object to \`$destfile'" ;; esac # Install the libtool object if requested. test -n "$destfile" && \ func_show_eval "$install_prog $file $destfile" 'exit $?' # Install the old object if enabled. if test "$build_old_libs" = yes; then # Deduce the name of the old-style object file. func_lo2o "$file" staticobj=$func_lo2o_result func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?' fi exit $EXIT_SUCCESS ;; *) # Figure out destination file name, if it wasn't already specified. if test -n "$destname"; then destfile="$destdir/$destname" else func_basename "$file" destfile="$func_basename_result" destfile="$destdir/$destfile" fi # If the file is missing, and there is a .exe on the end, strip it # because it is most likely a libtool script we actually want to # install stripped_ext="" case $file in *.exe) if test ! -f "$file"; then func_stripname '' '.exe' "$file" file=$func_stripname_result stripped_ext=".exe" fi ;; esac # Do a test to see if this is really a libtool program. case $host in *cygwin* | *mingw*) if func_ltwrapper_executable_p "$file"; then func_ltwrapper_scriptname "$file" wrapper=$func_ltwrapper_scriptname_result else func_stripname '' '.exe' "$file" wrapper=$func_stripname_result fi ;; *) wrapper=$file ;; esac if func_ltwrapper_script_p "$wrapper"; then notinst_deplibs= relink_command= func_source "$wrapper" # Check the variables that should have been set. test -z "$generated_by_libtool_version" && \ func_fatal_error "invalid libtool wrapper script \`$wrapper'" finalize=yes for lib in $notinst_deplibs; do # Check to see that each library is installed. libdir= if test -f "$lib"; then func_source "$lib" fi libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test if test -n "$libdir" && test ! -f "$libfile"; then func_warning "\`$lib' has not been installed in \`$libdir'" finalize=no fi done relink_command= func_source "$wrapper" outputname= if test "$fast_install" = no && test -n "$relink_command"; then $opt_dry_run || { if test "$finalize" = yes; then tmpdir=`func_mktempdir` func_basename "$file$stripped_ext" file="$func_basename_result" outputname="$tmpdir/$file" # Replace the output file specification. relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` $opt_silent || { func_quote_for_expand "$relink_command" eval "func_echo $func_quote_for_expand_result" } if eval "$relink_command"; then : else func_error "error: relink \`$file' with the above command before installing it" $opt_dry_run || ${RM}r "$tmpdir" continue fi file="$outputname" else func_warning "cannot relink \`$file'" fi } else # Install the binary that we compiled earlier. file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` fi fi # remove .exe since cygwin /usr/bin/install will append another # one anyway case $install_prog,$host in */usr/bin/install*,*cygwin*) case $file:$destfile in *.exe:*.exe) # this is ok ;; *.exe:*) destfile=$destfile.exe ;; *:*.exe) func_stripname '' '.exe' "$destfile" destfile=$func_stripname_result ;; esac ;; esac func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?' $opt_dry_run || if test -n "$outputname"; then ${RM}r "$tmpdir" fi ;; esac done for file in $staticlibs; do func_basename "$file" name="$func_basename_result" # Set up the ranlib parameters. oldlib="$destdir/$name" func_show_eval "$install_prog \$file \$oldlib" 'exit $?' if test -n "$stripme" && test -n "$old_striplib"; then func_show_eval "$old_striplib $oldlib" 'exit $?' fi # Do each command in the postinstall commands. func_execute_cmds "$old_postinstall_cmds" 'exit $?' done test -n "$future_libdirs" && \ func_warning "remember to run \`$progname --finish$future_libdirs'" if test -n "$current_libdirs"; then # Maybe just do a dry run. $opt_dry_run && current_libdirs=" -n$current_libdirs" exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' else exit $EXIT_SUCCESS fi } test "$mode" = install && func_mode_install ${1+"$@"} # func_generate_dlsyms outputname originator pic_p # Extract symbols from dlprefiles and create ${outputname}S.o with # a dlpreopen symbol table. func_generate_dlsyms () { $opt_debug my_outputname="$1" my_originator="$2" my_pic_p="${3-no}" my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'` my_dlsyms= if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then if test -n "$NM" && test -n "$global_symbol_pipe"; then my_dlsyms="${my_outputname}S.c" else func_error "not configured to extract global symbols from dlpreopened files" fi fi if test -n "$my_dlsyms"; then case $my_dlsyms in "") ;; *.c) # Discover the nlist of each of the dlfiles. nlist="$output_objdir/${my_outputname}.nm" func_show_eval "$RM $nlist ${nlist}S ${nlist}T" # Parse the name list into a source file. func_verbose "creating $output_objdir/$my_dlsyms" $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\ /* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */ /* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */ #ifdef __cplusplus extern \"C\" { #endif /* External symbol declarations for the compiler. */\ " if test "$dlself" = yes; then func_verbose "generating symbol list for \`$output'" $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist" # Add our own program objects to the symbol list. progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` for progfile in $progfiles; do func_verbose "extracting global C symbols from \`$progfile'" $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'" done if test -n "$exclude_expsyms"; then $opt_dry_run || { eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' eval '$MV "$nlist"T "$nlist"' } fi if test -n "$export_symbols_regex"; then $opt_dry_run || { eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' eval '$MV "$nlist"T "$nlist"' } fi # Prepare the list of exported symbols if test -z "$export_symbols"; then export_symbols="$output_objdir/$outputname.exp" $opt_dry_run || { $RM $export_symbols eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' case $host in *cygwin* | *mingw* | *cegcc* ) eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' ;; esac } else $opt_dry_run || { eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' eval '$MV "$nlist"T "$nlist"' case $host in *cygwin | *mingw* | *cegcc* ) eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' ;; esac } fi fi for dlprefile in $dlprefiles; do func_verbose "extracting global C symbols from \`$dlprefile'" func_basename "$dlprefile" name="$func_basename_result" $opt_dry_run || { eval '$ECHO ": $name " >> "$nlist"' eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'" } done $opt_dry_run || { # Make sure we have at least an empty file. test -f "$nlist" || : > "$nlist" if test -n "$exclude_expsyms"; then $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T $MV "$nlist"T "$nlist" fi # Try sorting and uniquifying the output. if $GREP -v "^: " < "$nlist" | if sort -k 3 /dev/null 2>&1; then sort -k 3 else sort +2 fi | uniq > "$nlist"S; then : else $GREP -v "^: " < "$nlist" > "$nlist"S fi if test -f "$nlist"S; then eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"' else $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms" fi $ECHO >> "$output_objdir/$my_dlsyms" "\ /* The mapping between symbol names and symbols. */ typedef struct { const char *name; void *address; } lt_dlsymlist; " case $host in *cygwin* | *mingw* | *cegcc* ) $ECHO >> "$output_objdir/$my_dlsyms" "\ /* DATA imports from DLLs on WIN32 con't be const, because runtime relocations are performed -- see ld's documentation on pseudo-relocs. */" lt_dlsym_const= ;; *osf5*) echo >> "$output_objdir/$my_dlsyms" "\ /* This system does not cope well with relocations in const data */" lt_dlsym_const= ;; *) lt_dlsym_const=const ;; esac $ECHO >> "$output_objdir/$my_dlsyms" "\ extern $lt_dlsym_const lt_dlsymlist lt_${my_prefix}_LTX_preloaded_symbols[]; $lt_dlsym_const lt_dlsymlist lt_${my_prefix}_LTX_preloaded_symbols[] = {\ { \"$my_originator\", (void *) 0 }," case $need_lib_prefix in no) eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms" ;; *) eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms" ;; esac $ECHO >> "$output_objdir/$my_dlsyms" "\ {0, (void *) 0} }; /* This works around a problem in FreeBSD linker */ #ifdef FREEBSD_WORKAROUND static const void *lt_preloaded_setup() { return lt_${my_prefix}_LTX_preloaded_symbols; } #endif #ifdef __cplusplus } #endif\ " } # !$opt_dry_run pic_flag_for_symtable= case "$compile_command " in *" -static "*) ;; *) case $host in # compiling the symbol table file with pic_flag works around # a FreeBSD bug that causes programs to crash when -lm is # linked before any other PIC object. But we must not use # pic_flag when linking with -static. The problem exists in # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;; *-*-hpux*) pic_flag_for_symtable=" $pic_flag" ;; *) if test "X$my_pic_p" != Xno; then pic_flag_for_symtable=" $pic_flag" fi ;; esac ;; esac symtab_cflags= for arg in $LTCFLAGS; do case $arg in -pie | -fpie | -fPIE) ;; *) symtab_cflags="$symtab_cflags $arg" ;; esac done # Now compile the dynamic symbol file. func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?' # Clean up the generated files. func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"' # Transform the symbol file into the correct name. symfileobj="$output_objdir/${my_outputname}S.$objext" case $host in *cygwin* | *mingw* | *cegcc* ) if test -f "$output_objdir/$my_outputname.def"; then compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` else compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` fi ;; *) compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` ;; esac ;; *) func_fatal_error "unknown suffix for \`$my_dlsyms'" ;; esac else # We keep going just in case the user didn't refer to # lt_preloaded_symbols. The linker will fail if global_symbol_pipe # really was required. # Nullify the symbol file. compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` fi } # func_win32_libid arg # return the library type of file 'arg' # # Need a lot of goo to handle *both* DLLs and import libs # Has to be a shell function in order to 'eat' the argument # that is supplied when $file_magic_command is called. func_win32_libid () { $opt_debug win32_libid_type="unknown" win32_fileres=`file -L $1 2>/dev/null` case $win32_fileres in *ar\ archive\ import\ library*) # definitely import win32_libid_type="x86 archive import" ;; *ar\ archive*) # could be an import, or static if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then win32_nmres=`eval $NM -f posix -A $1 | $SED -n -e ' 1,100{ / I /{ s,.*,import, p q } }'` case $win32_nmres in import*) win32_libid_type="x86 archive import";; *) win32_libid_type="x86 archive static";; esac fi ;; *DLL*) win32_libid_type="x86 DLL" ;; *executable*) # but shell scripts are "executable" too... case $win32_fileres in *MS\ Windows\ PE\ Intel*) win32_libid_type="x86 DLL" ;; esac ;; esac $ECHO "$win32_libid_type" } # func_extract_an_archive dir oldlib func_extract_an_archive () { $opt_debug f_ex_an_ar_dir="$1"; shift f_ex_an_ar_oldlib="$1" func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?' if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then : else func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" fi } # func_extract_archives gentop oldlib ... func_extract_archives () { $opt_debug my_gentop="$1"; shift my_oldlibs=${1+"$@"} my_oldobjs="" my_xlib="" my_xabs="" my_xdir="" for my_xlib in $my_oldlibs; do # Extract the objects. case $my_xlib in [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; *) my_xabs=`pwd`"/$my_xlib" ;; esac func_basename "$my_xlib" my_xlib="$func_basename_result" my_xlib_u=$my_xlib while :; do case " $extracted_archives " in *" $my_xlib_u "*) func_arith $extracted_serial + 1 extracted_serial=$func_arith_result my_xlib_u=lt$extracted_serial-$my_xlib ;; *) break ;; esac done extracted_archives="$extracted_archives $my_xlib_u" my_xdir="$my_gentop/$my_xlib_u" func_mkdir_p "$my_xdir" case $host in *-darwin*) func_verbose "Extracting $my_xabs" # Do not bother doing anything if just a dry run $opt_dry_run || { darwin_orig_dir=`pwd` cd $my_xdir || exit $? darwin_archive=$my_xabs darwin_curdir=`pwd` darwin_base_archive=`basename "$darwin_archive"` darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true` if test -n "$darwin_arches"; then darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'` darwin_arch= func_verbose "$darwin_base_archive has multiple architectures $darwin_arches" for darwin_arch in $darwin_arches ; do func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}" $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" func_extract_an_archive "`pwd`" "${darwin_base_archive}" cd "$darwin_curdir" $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" done # $darwin_arches ## Okay now we've a bunch of thin objects, gotta fatten them up :) darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u` darwin_file= darwin_files= for darwin_file in $darwin_filelist; do darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP` $LIPO -create -output "$darwin_file" $darwin_files done # $darwin_filelist $RM -rf unfat-$$ cd "$darwin_orig_dir" else cd $darwin_orig_dir func_extract_an_archive "$my_xdir" "$my_xabs" fi # $darwin_arches } # !$opt_dry_run ;; *) func_extract_an_archive "$my_xdir" "$my_xabs" ;; esac my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` done func_extract_archives_result="$my_oldobjs" } # func_emit_wrapper_part1 [arg=no] # # Emit the first part of a libtool wrapper script on stdout. # For more information, see the description associated with # func_emit_wrapper(), below. func_emit_wrapper_part1 () { func_emit_wrapper_part1_arg1=no if test -n "$1" ; then func_emit_wrapper_part1_arg1=$1 fi $ECHO "\ #! $SHELL # $output - temporary wrapper script for $objdir/$outputname # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION # # The $output program cannot be directly executed until all the libtool # libraries that it depends on are installed. # # This wrapper script should never be moved out of the build directory. # If it is, it will not operate correctly. # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. Xsed='${SED} -e 1s/^X//' sed_quote_subst='$sed_quote_subst' # Be Bourne compatible if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which # is contrary to our usage. Disable this feature. alias -g '\${1+\"\$@\"}'='\"\$@\"' setopt NO_GLOB_SUBST else case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac fi BIN_SH=xpg4; export BIN_SH # for Tru64 DUALCASE=1; export DUALCASE # for MKS sh # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH relink_command=\"$relink_command\" # This environment variable determines our operation mode. if test \"\$libtool_install_magic\" = \"$magic\"; then # install mode needs the following variables: generated_by_libtool_version='$macro_version' notinst_deplibs='$notinst_deplibs' else # When we are sourced in execute mode, \$file and \$ECHO are already set. if test \"\$libtool_execute_magic\" != \"$magic\"; then ECHO=\"$qecho\" file=\"\$0\" # Make sure echo works. if test \"X\$1\" = X--no-reexec; then # Discard the --no-reexec flag, and continue. shift elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then # Yippee, \$ECHO works! : else # Restart under the correct shell, and then maybe \$ECHO will work. exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} fi fi\ " $ECHO "\ # Find the directory that this script lives in. thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` test \"x\$thisdir\" = \"x\$file\" && thisdir=. # Follow symbolic links until we get to the real thisdir. file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` while test -n \"\$file\"; do destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` # If there was a directory component, then change thisdir. if test \"x\$destdir\" != \"x\$file\"; then case \"\$destdir\" in [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; *) thisdir=\"\$thisdir/\$destdir\" ;; esac fi file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\` file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` done " } # end: func_emit_wrapper_part1 # func_emit_wrapper_part2 [arg=no] # # Emit the second part of a libtool wrapper script on stdout. # For more information, see the description associated with # func_emit_wrapper(), below. func_emit_wrapper_part2 () { func_emit_wrapper_part2_arg1=no if test -n "$1" ; then func_emit_wrapper_part2_arg1=$1 fi $ECHO "\ # Usually 'no', except on cygwin/mingw when embedded into # the cwrapper. WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_part2_arg1 if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then # special case for '.' if test \"\$thisdir\" = \".\"; then thisdir=\`pwd\` fi # remove .libs from thisdir case \"\$thisdir\" in *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;; $objdir ) thisdir=. ;; esac fi # Try to get the absolute directory name. absdir=\`cd \"\$thisdir\" && pwd\` test -n \"\$absdir\" && thisdir=\"\$absdir\" " if test "$fast_install" = yes; then $ECHO "\ program=lt-'$outputname'$exeext progdir=\"\$thisdir/$objdir\" if test ! -f \"\$progdir/\$program\" || { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ test \"X\$file\" != \"X\$progdir/\$program\"; }; then file=\"\$\$-\$program\" if test ! -d \"\$progdir\"; then $MKDIR \"\$progdir\" else $RM \"\$progdir/\$file\" fi" $ECHO "\ # relink executable if necessary if test -n \"\$relink_command\"; then if relink_command_output=\`eval \$relink_command 2>&1\`; then : else $ECHO \"\$relink_command_output\" >&2 $RM \"\$progdir/\$file\" exit 1 fi fi $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || { $RM \"\$progdir/\$program\"; $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; } $RM \"\$progdir/\$file\" fi" else $ECHO "\ program='$outputname' progdir=\"\$thisdir/$objdir\" " fi $ECHO "\ if test -f \"\$progdir/\$program\"; then" # Export our shlibpath_var if we have one. if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then $ECHO "\ # Add our own library path to $shlibpath_var $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" # Some systems cannot cope with colon-terminated $shlibpath_var # The second colon is a workaround for a bug in BeOS R4 sed $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` export $shlibpath_var " fi # fixup the dll searchpath if we need to. if test -n "$dllsearchpath"; then $ECHO "\ # Add the dll search path components to the executable PATH PATH=$dllsearchpath:\$PATH " fi $ECHO "\ if test \"\$libtool_execute_magic\" != \"$magic\"; then # Run the actual program with our arguments. " case $host in # Backslashes separate directories on plain windows *-*-mingw | *-*-os2* | *-cegcc*) $ECHO "\ exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} " ;; *) $ECHO "\ exec \"\$progdir/\$program\" \${1+\"\$@\"} " ;; esac $ECHO "\ \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 exit 1 fi else # The program doesn't exist. \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 exit 1 fi fi\ " } # end: func_emit_wrapper_part2 # func_emit_wrapper [arg=no] # # Emit a libtool wrapper script on stdout. # Don't directly open a file because we may want to # incorporate the script contents within a cygwin/mingw # wrapper executable. Must ONLY be called from within # func_mode_link because it depends on a number of variables # set therein. # # ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR # variable will take. If 'yes', then the emitted script # will assume that the directory in which it is stored is # the $objdir directory. This is a cygwin/mingw-specific # behavior. func_emit_wrapper () { func_emit_wrapper_arg1=no if test -n "$1" ; then func_emit_wrapper_arg1=$1 fi # split this up so that func_emit_cwrapperexe_src # can call each part independently. func_emit_wrapper_part1 "${func_emit_wrapper_arg1}" func_emit_wrapper_part2 "${func_emit_wrapper_arg1}" } # func_to_host_path arg # # Convert paths to host format when used with build tools. # Intended for use with "native" mingw (where libtool itself # is running under the msys shell), or in the following cross- # build environments: # $build $host # mingw (msys) mingw [e.g. native] # cygwin mingw # *nix + wine mingw # where wine is equipped with the `winepath' executable. # In the native mingw case, the (msys) shell automatically # converts paths for any non-msys applications it launches, # but that facility isn't available from inside the cwrapper. # Similar accommodations are necessary for $host mingw and # $build cygwin. Calling this function does no harm for other # $host/$build combinations not listed above. # # ARG is the path (on $build) that should be converted to # the proper representation for $host. The result is stored # in $func_to_host_path_result. func_to_host_path () { func_to_host_path_result="$1" if test -n "$1" ; then case $host in *mingw* ) lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' case $build in *mingw* ) # actually, msys # awkward: cmd appends spaces to result lt_sed_strip_trailing_spaces="s/[ ]*\$//" func_to_host_path_tmp1=`( cmd //c echo "$1" |\ $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""` func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\ $SED -e "$lt_sed_naive_backslashify"` ;; *cygwin* ) func_to_host_path_tmp1=`cygpath -w "$1"` func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\ $SED -e "$lt_sed_naive_backslashify"` ;; * ) # Unfortunately, winepath does not exit with a non-zero # error code, so we are forced to check the contents of # stdout. On the other hand, if the command is not # found, the shell will set an exit code of 127 and print # *an error message* to stdout. So we must check for both # error code of zero AND non-empty stdout, which explains # the odd construction: func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null` if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\ $SED -e "$lt_sed_naive_backslashify"` else # Allow warning below. func_to_host_path_result="" fi ;; esac if test -z "$func_to_host_path_result" ; then func_error "Could not determine host path corresponding to" func_error " '$1'" func_error "Continuing, but uninstalled executables may not work." # Fallback: func_to_host_path_result="$1" fi ;; esac fi } # end: func_to_host_path # func_to_host_pathlist arg # # Convert pathlists to host format when used with build tools. # See func_to_host_path(), above. This function supports the # following $build/$host combinations (but does no harm for # combinations not listed here): # $build $host # mingw (msys) mingw [e.g. native] # cygwin mingw # *nix + wine mingw # # Path separators are also converted from $build format to # $host format. If ARG begins or ends with a path separator # character, it is preserved (but converted to $host format) # on output. # # ARG is a pathlist (on $build) that should be converted to # the proper representation on $host. The result is stored # in $func_to_host_pathlist_result. func_to_host_pathlist () { func_to_host_pathlist_result="$1" if test -n "$1" ; then case $host in *mingw* ) lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' # Remove leading and trailing path separator characters from # ARG. msys behavior is inconsistent here, cygpath turns them # into '.;' and ';.', and winepath ignores them completely. func_to_host_pathlist_tmp2="$1" # Once set for this call, this variable should not be # reassigned. It is used in tha fallback case. func_to_host_pathlist_tmp1=`echo "$func_to_host_pathlist_tmp2" |\ $SED -e 's|^:*||' -e 's|:*$||'` case $build in *mingw* ) # Actually, msys. # Awkward: cmd appends spaces to result. lt_sed_strip_trailing_spaces="s/[ ]*\$//" func_to_host_pathlist_tmp2=`( cmd //c echo "$func_to_host_pathlist_tmp1" |\ $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""` func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\ $SED -e "$lt_sed_naive_backslashify"` ;; *cygwin* ) func_to_host_pathlist_tmp2=`cygpath -w -p "$func_to_host_pathlist_tmp1"` func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\ $SED -e "$lt_sed_naive_backslashify"` ;; * ) # unfortunately, winepath doesn't convert pathlists func_to_host_pathlist_result="" func_to_host_pathlist_oldIFS=$IFS IFS=: for func_to_host_pathlist_f in $func_to_host_pathlist_tmp1 ; do IFS=$func_to_host_pathlist_oldIFS if test -n "$func_to_host_pathlist_f" ; then func_to_host_path "$func_to_host_pathlist_f" if test -n "$func_to_host_path_result" ; then if test -z "$func_to_host_pathlist_result" ; then func_to_host_pathlist_result="$func_to_host_path_result" else func_to_host_pathlist_result="$func_to_host_pathlist_result;$func_to_host_path_result" fi fi fi IFS=: done IFS=$func_to_host_pathlist_oldIFS ;; esac if test -z "$func_to_host_pathlist_result" ; then func_error "Could not determine the host path(s) corresponding to" func_error " '$1'" func_error "Continuing, but uninstalled executables may not work." # Fallback. This may break if $1 contains DOS-style drive # specifications. The fix is not to complicate the expression # below, but for the user to provide a working wine installation # with winepath so that path translation in the cross-to-mingw # case works properly. lt_replace_pathsep_nix_to_dos="s|:|;|g" func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp1" |\ $SED -e "$lt_replace_pathsep_nix_to_dos"` fi # Now, add the leading and trailing path separators back case "$1" in :* ) func_to_host_pathlist_result=";$func_to_host_pathlist_result" ;; esac case "$1" in *: ) func_to_host_pathlist_result="$func_to_host_pathlist_result;" ;; esac ;; esac fi } # end: func_to_host_pathlist # func_emit_cwrapperexe_src # emit the source code for a wrapper executable on stdout # Must ONLY be called from within func_mode_link because # it depends on a number of variable set therein. func_emit_cwrapperexe_src () { cat < #include #ifdef _MSC_VER # include # include # include # define setmode _setmode #else # include # include # ifdef __CYGWIN__ # include # define HAVE_SETENV # ifdef __STRICT_ANSI__ char *realpath (const char *, char *); int putenv (char *); int setenv (const char *, const char *, int); # endif # endif #endif #include #include #include #include #include #include #include #include #if defined(PATH_MAX) # define LT_PATHMAX PATH_MAX #elif defined(MAXPATHLEN) # define LT_PATHMAX MAXPATHLEN #else # define LT_PATHMAX 1024 #endif #ifndef S_IXOTH # define S_IXOTH 0 #endif #ifndef S_IXGRP # define S_IXGRP 0 #endif #ifdef _MSC_VER # define S_IXUSR _S_IEXEC # define stat _stat # ifndef _INTPTR_T_DEFINED # define intptr_t int # endif #endif #ifndef DIR_SEPARATOR # define DIR_SEPARATOR '/' # define PATH_SEPARATOR ':' #endif #if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ defined (__OS2__) # define HAVE_DOS_BASED_FILE_SYSTEM # define FOPEN_WB "wb" # ifndef DIR_SEPARATOR_2 # define DIR_SEPARATOR_2 '\\' # endif # ifndef PATH_SEPARATOR_2 # define PATH_SEPARATOR_2 ';' # endif #endif #ifndef DIR_SEPARATOR_2 # define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) #else /* DIR_SEPARATOR_2 */ # define IS_DIR_SEPARATOR(ch) \ (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) #endif /* DIR_SEPARATOR_2 */ #ifndef PATH_SEPARATOR_2 # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) #else /* PATH_SEPARATOR_2 */ # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) #endif /* PATH_SEPARATOR_2 */ #ifdef __CYGWIN__ # define FOPEN_WB "wb" #endif #ifndef FOPEN_WB # define FOPEN_WB "w" #endif #ifndef _O_BINARY # define _O_BINARY 0 #endif #define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) #define XFREE(stale) do { \ if (stale) { free ((void *) stale); stale = 0; } \ } while (0) #undef LTWRAPPER_DEBUGPRINTF #if defined DEBUGWRAPPER # define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args static void ltwrapper_debugprintf (const char *fmt, ...) { va_list args; va_start (args, fmt); (void) vfprintf (stderr, fmt, args); va_end (args); } #else # define LTWRAPPER_DEBUGPRINTF(args) #endif const char *program_name = NULL; void *xmalloc (size_t num); char *xstrdup (const char *string); const char *base_name (const char *name); char *find_executable (const char *wrapper); char *chase_symlinks (const char *pathspec); int make_executable (const char *path); int check_executable (const char *path); char *strendzap (char *str, const char *pat); void lt_fatal (const char *message, ...); void lt_setenv (const char *name, const char *value); char *lt_extend_str (const char *orig_value, const char *add, int to_end); void lt_opt_process_env_set (const char *arg); void lt_opt_process_env_prepend (const char *arg); void lt_opt_process_env_append (const char *arg); int lt_split_name_value (const char *arg, char** name, char** value); void lt_update_exe_path (const char *name, const char *value); void lt_update_lib_path (const char *name, const char *value); static const char *script_text_part1 = EOF func_emit_wrapper_part1 yes | $SED -e 's/\([\\"]\)/\\\1/g' \ -e 's/^/ "/' -e 's/$/\\n"/' echo ";" cat <"))); for (i = 0; i < newargc; i++) { LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d] : %s\n", i, (newargz[i] ? newargz[i] : ""))); } EOF case $host_os in mingw*) cat <<"EOF" /* execv doesn't actually work on mingw as expected on unix */ rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz); if (rval == -1) { /* failed to start process */ LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"%s\": errno = %d\n", lt_argv_zero, errno)); return 127; } return rval; EOF ;; *) cat <<"EOF" execv (lt_argv_zero, newargz); return rval; /* =127, but avoids unused variable warning */ EOF ;; esac cat <<"EOF" } void * xmalloc (size_t num) { void *p = (void *) malloc (num); if (!p) lt_fatal ("Memory exhausted"); return p; } char * xstrdup (const char *string) { return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL; } const char * base_name (const char *name) { const char *base; #if defined (HAVE_DOS_BASED_FILE_SYSTEM) /* Skip over the disk name in MSDOS pathnames. */ if (isalpha ((unsigned char) name[0]) && name[1] == ':') name += 2; #endif for (base = name; *name; name++) if (IS_DIR_SEPARATOR (*name)) base = name + 1; return base; } int check_executable (const char *path) { struct stat st; LTWRAPPER_DEBUGPRINTF (("(check_executable) : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!")); if ((!path) || (!*path)) return 0; if ((stat (path, &st) >= 0) && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH))) return 1; else return 0; } int make_executable (const char *path) { int rval = 0; struct stat st; LTWRAPPER_DEBUGPRINTF (("(make_executable) : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!")); if ((!path) || (!*path)) return 0; if (stat (path, &st) >= 0) { rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR); } return rval; } /* Searches for the full path of the wrapper. Returns newly allocated full path name if found, NULL otherwise Does not chase symlinks, even on platforms that support them. */ char * find_executable (const char *wrapper) { int has_slash = 0; const char *p; const char *p_next; /* static buffer for getcwd */ char tmp[LT_PATHMAX + 1]; int tmp_len; char *concat_name; LTWRAPPER_DEBUGPRINTF (("(find_executable) : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!")); if ((wrapper == NULL) || (*wrapper == '\0')) return NULL; /* Absolute path? */ #if defined (HAVE_DOS_BASED_FILE_SYSTEM) if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':') { concat_name = xstrdup (wrapper); if (check_executable (concat_name)) return concat_name; XFREE (concat_name); } else { #endif if (IS_DIR_SEPARATOR (wrapper[0])) { concat_name = xstrdup (wrapper); if (check_executable (concat_name)) return concat_name; XFREE (concat_name); } #if defined (HAVE_DOS_BASED_FILE_SYSTEM) } #endif for (p = wrapper; *p; p++) if (*p == '/') { has_slash = 1; break; } if (!has_slash) { /* no slashes; search PATH */ const char *path = getenv ("PATH"); if (path != NULL) { for (p = path; *p; p = p_next) { const char *q; size_t p_len; for (q = p; *q; q++) if (IS_PATH_SEPARATOR (*q)) break; p_len = q - p; p_next = (*q == '\0' ? q : q + 1); if (p_len == 0) { /* empty path: current directory */ if (getcwd (tmp, LT_PATHMAX) == NULL) lt_fatal ("getcwd failed"); tmp_len = strlen (tmp); concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); memcpy (concat_name, tmp, tmp_len); concat_name[tmp_len] = '/'; strcpy (concat_name + tmp_len + 1, wrapper); } else { concat_name = XMALLOC (char, p_len + 1 + strlen (wrapper) + 1); memcpy (concat_name, p, p_len); concat_name[p_len] = '/'; strcpy (concat_name + p_len + 1, wrapper); } if (check_executable (concat_name)) return concat_name; XFREE (concat_name); } } /* not found in PATH; assume curdir */ } /* Relative path | not found in path: prepend cwd */ if (getcwd (tmp, LT_PATHMAX) == NULL) lt_fatal ("getcwd failed"); tmp_len = strlen (tmp); concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); memcpy (concat_name, tmp, tmp_len); concat_name[tmp_len] = '/'; strcpy (concat_name + tmp_len + 1, wrapper); if (check_executable (concat_name)) return concat_name; XFREE (concat_name); return NULL; } char * chase_symlinks (const char *pathspec) { #ifndef S_ISLNK return xstrdup (pathspec); #else char buf[LT_PATHMAX]; struct stat s; char *tmp_pathspec = xstrdup (pathspec); char *p; int has_symlinks = 0; while (strlen (tmp_pathspec) && !has_symlinks) { LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n", tmp_pathspec)); if (lstat (tmp_pathspec, &s) == 0) { if (S_ISLNK (s.st_mode) != 0) { has_symlinks = 1; break; } /* search backwards for last DIR_SEPARATOR */ p = tmp_pathspec + strlen (tmp_pathspec) - 1; while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) p--; if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) { /* no more DIR_SEPARATORS left */ break; } *p = '\0'; } else { char *errstr = strerror (errno); lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr); } } XFREE (tmp_pathspec); if (!has_symlinks) { return xstrdup (pathspec); } tmp_pathspec = realpath (pathspec, buf); if (tmp_pathspec == 0) { lt_fatal ("Could not follow symlinks for %s", pathspec); } return xstrdup (tmp_pathspec); #endif } char * strendzap (char *str, const char *pat) { size_t len, patlen; assert (str != NULL); assert (pat != NULL); len = strlen (str); patlen = strlen (pat); if (patlen <= len) { str += len - patlen; if (strcmp (str, pat) == 0) *str = '\0'; } return str; } static void lt_error_core (int exit_status, const char *mode, const char *message, va_list ap) { fprintf (stderr, "%s: %s: ", program_name, mode); vfprintf (stderr, message, ap); fprintf (stderr, ".\n"); if (exit_status >= 0) exit (exit_status); } void lt_fatal (const char *message, ...) { va_list ap; va_start (ap, message); lt_error_core (EXIT_FAILURE, "FATAL", message, ap); va_end (ap); } void lt_setenv (const char *name, const char *value) { LTWRAPPER_DEBUGPRINTF (("(lt_setenv) setting '%s' to '%s'\n", (name ? name : ""), (value ? value : ""))); { #ifdef HAVE_SETENV /* always make a copy, for consistency with !HAVE_SETENV */ char *str = xstrdup (value); setenv (name, str, 1); #else int len = strlen (name) + 1 + strlen (value) + 1; char *str = XMALLOC (char, len); sprintf (str, "%s=%s", name, value); if (putenv (str) != EXIT_SUCCESS) { XFREE (str); } #endif } } char * lt_extend_str (const char *orig_value, const char *add, int to_end) { char *new_value; if (orig_value && *orig_value) { int orig_value_len = strlen (orig_value); int add_len = strlen (add); new_value = XMALLOC (char, add_len + orig_value_len + 1); if (to_end) { strcpy (new_value, orig_value); strcpy (new_value + orig_value_len, add); } else { strcpy (new_value, add); strcpy (new_value + add_len, orig_value); } } else { new_value = xstrdup (add); } return new_value; } int lt_split_name_value (const char *arg, char** name, char** value) { const char *p; int len; if (!arg || !*arg) return 1; p = strchr (arg, (int)'='); if (!p) return 1; *value = xstrdup (++p); len = strlen (arg) - strlen (*value); *name = XMALLOC (char, len); strncpy (*name, arg, len-1); (*name)[len - 1] = '\0'; return 0; } void lt_opt_process_env_set (const char *arg) { char *name = NULL; char *value = NULL; if (lt_split_name_value (arg, &name, &value) != 0) { XFREE (name); XFREE (value); lt_fatal ("bad argument for %s: '%s'", env_set_opt, arg); } lt_setenv (name, value); XFREE (name); XFREE (value); } void lt_opt_process_env_prepend (const char *arg) { char *name = NULL; char *value = NULL; char *new_value = NULL; if (lt_split_name_value (arg, &name, &value) != 0) { XFREE (name); XFREE (value); lt_fatal ("bad argument for %s: '%s'", env_prepend_opt, arg); } new_value = lt_extend_str (getenv (name), value, 0); lt_setenv (name, new_value); XFREE (new_value); XFREE (name); XFREE (value); } void lt_opt_process_env_append (const char *arg) { char *name = NULL; char *value = NULL; char *new_value = NULL; if (lt_split_name_value (arg, &name, &value) != 0) { XFREE (name); XFREE (value); lt_fatal ("bad argument for %s: '%s'", env_append_opt, arg); } new_value = lt_extend_str (getenv (name), value, 1); lt_setenv (name, new_value); XFREE (new_value); XFREE (name); XFREE (value); } void lt_update_exe_path (const char *name, const char *value) { LTWRAPPER_DEBUGPRINTF (("(lt_update_exe_path) modifying '%s' by prepending '%s'\n", (name ? name : ""), (value ? value : ""))); if (name && *name && value && *value) { char *new_value = lt_extend_str (getenv (name), value, 0); /* some systems can't cope with a ':'-terminated path #' */ int len = strlen (new_value); while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1])) { new_value[len-1] = '\0'; } lt_setenv (name, new_value); XFREE (new_value); } } void lt_update_lib_path (const char *name, const char *value) { LTWRAPPER_DEBUGPRINTF (("(lt_update_lib_path) modifying '%s' by prepending '%s'\n", (name ? name : ""), (value ? value : ""))); if (name && *name && value && *value) { char *new_value = lt_extend_str (getenv (name), value, 0); lt_setenv (name, new_value); XFREE (new_value); } } EOF } # end: func_emit_cwrapperexe_src # func_mode_link arg... func_mode_link () { $opt_debug case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) # It is impossible to link a dll without this setting, and # we shouldn't force the makefile maintainer to figure out # which system we are compiling for in order to pass an extra # flag for every libtool invocation. # allow_undefined=no # FIXME: Unfortunately, there are problems with the above when trying # to make a dll which has undefined symbols, in which case not # even a static library is built. For now, we need to specify # -no-undefined on the libtool link line when we can be certain # that all symbols are satisfied, otherwise we get a static library. allow_undefined=yes ;; *) allow_undefined=yes ;; esac libtool_args=$nonopt base_compile="$nonopt $@" compile_command=$nonopt finalize_command=$nonopt compile_rpath= finalize_rpath= compile_shlibpath= finalize_shlibpath= convenience= old_convenience= deplibs= old_deplibs= compiler_flags= linker_flags= dllsearchpath= lib_search_path=`pwd` inst_prefix_dir= new_inherited_linker_flags= avoid_version=no dlfiles= dlprefiles= dlself=no export_dynamic=no export_symbols= export_symbols_regex= generated= libobjs= ltlibs= module=no no_install=no objs= non_pic_objects= precious_files_regex= prefer_static_libs=no preload=no prev= prevarg= release= rpath= xrpath= perm_rpath= temp_rpath= thread_safe=no vinfo= vinfo_number=no weak_libs= single_module="${wl}-single_module" func_infer_tag $base_compile # We need to know -static, to get the right output filenames. for arg do case $arg in -shared) test "$build_libtool_libs" != yes && \ func_fatal_configuration "can not build a shared library" build_old_libs=no break ;; -all-static | -static | -static-libtool-libs) case $arg in -all-static) if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then func_warning "complete static linking is impossible in this configuration" fi if test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi prefer_static_libs=yes ;; -static) if test -z "$pic_flag" && test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi prefer_static_libs=built ;; -static-libtool-libs) if test -z "$pic_flag" && test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi prefer_static_libs=yes ;; esac build_libtool_libs=no build_old_libs=yes break ;; esac done # See if our shared archives depend on static archives. test -n "$old_archive_from_new_cmds" && build_old_libs=yes # Go through the arguments, transforming them on the way. while test "$#" -gt 0; do arg="$1" shift func_quote_for_eval "$arg" qarg=$func_quote_for_eval_unquoted_result func_append libtool_args " $func_quote_for_eval_result" # If the previous option needs an argument, assign it. if test -n "$prev"; then case $prev in output) func_append compile_command " @OUTPUT@" func_append finalize_command " @OUTPUT@" ;; esac case $prev in dlfiles|dlprefiles) if test "$preload" = no; then # Add the symbol object into the linking commands. func_append compile_command " @SYMFILE@" func_append finalize_command " @SYMFILE@" preload=yes fi case $arg in *.la | *.lo) ;; # We handle these cases below. force) if test "$dlself" = no; then dlself=needless export_dynamic=yes fi prev= continue ;; self) if test "$prev" = dlprefiles; then dlself=yes elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then dlself=yes else dlself=needless export_dynamic=yes fi prev= continue ;; *) if test "$prev" = dlfiles; then dlfiles="$dlfiles $arg" else dlprefiles="$dlprefiles $arg" fi prev= continue ;; esac ;; expsyms) export_symbols="$arg" test -f "$arg" \ || func_fatal_error "symbol file \`$arg' does not exist" prev= continue ;; expsyms_regex) export_symbols_regex="$arg" prev= continue ;; framework) case $host in *-*-darwin*) case "$deplibs " in *" $qarg.ltframework "*) ;; *) deplibs="$deplibs $qarg.ltframework" # this is fixed later ;; esac ;; esac prev= continue ;; inst_prefix) inst_prefix_dir="$arg" prev= continue ;; objectlist) if test -f "$arg"; then save_arg=$arg moreargs= for fil in `cat "$save_arg"` do # moreargs="$moreargs $fil" arg=$fil # A libtool-controlled object. # Check to see that this really is a libtool object. if func_lalib_unsafe_p "$arg"; then pic_object= non_pic_object= # Read the .lo file func_source "$arg" if test -z "$pic_object" || test -z "$non_pic_object" || test "$pic_object" = none && test "$non_pic_object" = none; then func_fatal_error "cannot find name of object for \`$arg'" fi # Extract subdirectory from the argument. func_dirname "$arg" "/" "" xdir="$func_dirname_result" if test "$pic_object" != none; then # Prepend the subdirectory the object is found in. pic_object="$xdir$pic_object" if test "$prev" = dlfiles; then if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then dlfiles="$dlfiles $pic_object" prev= continue else # If libtool objects are unsupported, then we need to preload. prev=dlprefiles fi fi # CHECK ME: I think I busted this. -Ossama if test "$prev" = dlprefiles; then # Preload the old-style object. dlprefiles="$dlprefiles $pic_object" prev= fi # A PIC object. func_append libobjs " $pic_object" arg="$pic_object" fi # Non-PIC object. if test "$non_pic_object" != none; then # Prepend the subdirectory the object is found in. non_pic_object="$xdir$non_pic_object" # A standard non-PIC object func_append non_pic_objects " $non_pic_object" if test -z "$pic_object" || test "$pic_object" = none ; then arg="$non_pic_object" fi else # If the PIC object exists, use it instead. # $xdir was prepended to $pic_object above. non_pic_object="$pic_object" func_append non_pic_objects " $non_pic_object" fi else # Only an error if not doing a dry-run. if $opt_dry_run; then # Extract subdirectory from the argument. func_dirname "$arg" "/" "" xdir="$func_dirname_result" func_lo2o "$arg" pic_object=$xdir$objdir/$func_lo2o_result non_pic_object=$xdir$func_lo2o_result func_append libobjs " $pic_object" func_append non_pic_objects " $non_pic_object" else func_fatal_error "\`$arg' is not a valid libtool object" fi fi done else func_fatal_error "link input file \`$arg' does not exist" fi arg=$save_arg prev= continue ;; precious_regex) precious_files_regex="$arg" prev= continue ;; release) release="-$arg" prev= continue ;; rpath | xrpath) # We need an absolute path. case $arg in [\\/]* | [A-Za-z]:[\\/]*) ;; *) func_fatal_error "only absolute run-paths are allowed" ;; esac if test "$prev" = rpath; then case "$rpath " in *" $arg "*) ;; *) rpath="$rpath $arg" ;; esac else case "$xrpath " in *" $arg "*) ;; *) xrpath="$xrpath $arg" ;; esac fi prev= continue ;; shrext) shrext_cmds="$arg" prev= continue ;; weak) weak_libs="$weak_libs $arg" prev= continue ;; xcclinker) linker_flags="$linker_flags $qarg" compiler_flags="$compiler_flags $qarg" prev= func_append compile_command " $qarg" func_append finalize_command " $qarg" continue ;; xcompiler) compiler_flags="$compiler_flags $qarg" prev= func_append compile_command " $qarg" func_append finalize_command " $qarg" continue ;; xlinker) linker_flags="$linker_flags $qarg" compiler_flags="$compiler_flags $wl$qarg" prev= func_append compile_command " $wl$qarg" func_append finalize_command " $wl$qarg" continue ;; *) eval "$prev=\"\$arg\"" prev= continue ;; esac fi # test -n "$prev" prevarg="$arg" case $arg in -all-static) if test -n "$link_static_flag"; then # See comment for -static flag below, for more details. func_append compile_command " $link_static_flag" func_append finalize_command " $link_static_flag" fi continue ;; -allow-undefined) # FIXME: remove this flag sometime in the future. func_fatal_error "\`-allow-undefined' must not be used because it is the default" ;; -avoid-version) avoid_version=yes continue ;; -dlopen) prev=dlfiles continue ;; -dlpreopen) prev=dlprefiles continue ;; -export-dynamic) export_dynamic=yes continue ;; -export-symbols | -export-symbols-regex) if test -n "$export_symbols" || test -n "$export_symbols_regex"; then func_fatal_error "more than one -exported-symbols argument is not allowed" fi if test "X$arg" = "X-export-symbols"; then prev=expsyms else prev=expsyms_regex fi continue ;; -framework) prev=framework continue ;; -inst-prefix-dir) prev=inst_prefix continue ;; # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* # so, if we see these flags be careful not to treat them like -L -L[A-Z][A-Z]*:*) case $with_gcc/$host in no/*-*-irix* | /*-*-irix*) func_append compile_command " $arg" func_append finalize_command " $arg" ;; esac continue ;; -L*) func_stripname '-L' '' "$arg" dir=$func_stripname_result if test -z "$dir"; then if test "$#" -gt 0; then func_fatal_error "require no space between \`-L' and \`$1'" else func_fatal_error "need path for \`-L' option" fi fi # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) absdir=`cd "$dir" && pwd` test -z "$absdir" && \ func_fatal_error "cannot determine absolute directory name of \`$dir'" dir="$absdir" ;; esac case "$deplibs " in *" -L$dir "*) ;; *) deplibs="$deplibs -L$dir" lib_search_path="$lib_search_path $dir" ;; esac case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'` case :$dllsearchpath: in *":$dir:"*) ;; ::) dllsearchpath=$dir;; *) dllsearchpath="$dllsearchpath:$dir";; esac case :$dllsearchpath: in *":$testbindir:"*) ;; ::) dllsearchpath=$testbindir;; *) dllsearchpath="$dllsearchpath:$testbindir";; esac ;; esac continue ;; -l*) if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc*) # These systems don't actually have a C or math library (as such) continue ;; *-*-os2*) # These systems don't actually have a C library (as such) test "X$arg" = "X-lc" && continue ;; *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) # Do not include libc due to us having libc/libc_r. test "X$arg" = "X-lc" && continue ;; *-*-rhapsody* | *-*-darwin1.[012]) # Rhapsody C and math libraries are in the System framework deplibs="$deplibs System.ltframework" continue ;; *-*-sco3.2v5* | *-*-sco5v6*) # Causes problems with __ctype test "X$arg" = "X-lc" && continue ;; *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) # Compiler inserts libc in the correct place for threads to work test "X$arg" = "X-lc" && continue ;; esac elif test "X$arg" = "X-lc_r"; then case $host in *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) # Do not include libc_r directly, use -pthread flag. continue ;; esac fi deplibs="$deplibs $arg" continue ;; -module) module=yes continue ;; # Tru64 UNIX uses -model [arg] to determine the layout of C++ # classes, name mangling, and exception handling. # Darwin uses the -arch flag to determine output architecture. -model|-arch|-isysroot) compiler_flags="$compiler_flags $arg" func_append compile_command " $arg" func_append finalize_command " $arg" prev=xcompiler continue ;; -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) compiler_flags="$compiler_flags $arg" func_append compile_command " $arg" func_append finalize_command " $arg" case "$new_inherited_linker_flags " in *" $arg "*) ;; * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;; esac continue ;; -multi_module) single_module="${wl}-multi_module" continue ;; -no-fast-install) fast_install=no continue ;; -no-install) case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*) # The PATH hackery in wrapper scripts is required on Windows # and Darwin in order for the loader to find any dlls it needs. func_warning "\`-no-install' is ignored for $host" func_warning "assuming \`-no-fast-install' instead" fast_install=no ;; *) no_install=yes ;; esac continue ;; -no-undefined) allow_undefined=no continue ;; -objectlist) prev=objectlist continue ;; -o) prev=output ;; -precious-files-regex) prev=precious_regex continue ;; -release) prev=release continue ;; -rpath) prev=rpath continue ;; -R) prev=xrpath continue ;; -R*) func_stripname '-R' '' "$arg" dir=$func_stripname_result # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) func_fatal_error "only absolute run-paths are allowed" ;; esac case "$xrpath " in *" $dir "*) ;; *) xrpath="$xrpath $dir" ;; esac continue ;; -shared) # The effects of -shared are defined in a previous loop. continue ;; -shrext) prev=shrext continue ;; -static | -static-libtool-libs) # The effects of -static are defined in a previous loop. # We used to do the same as -all-static on platforms that # didn't have a PIC flag, but the assumption that the effects # would be equivalent was wrong. It would break on at least # Digital Unix and AIX. continue ;; -thread-safe) thread_safe=yes continue ;; -version-info) prev=vinfo continue ;; -version-number) prev=vinfo vinfo_number=yes continue ;; -weak) prev=weak continue ;; -Wc,*) func_stripname '-Wc,' '' "$arg" args=$func_stripname_result arg= save_ifs="$IFS"; IFS=',' for flag in $args; do IFS="$save_ifs" func_quote_for_eval "$flag" arg="$arg $wl$func_quote_for_eval_result" compiler_flags="$compiler_flags $func_quote_for_eval_result" done IFS="$save_ifs" func_stripname ' ' '' "$arg" arg=$func_stripname_result ;; -Wl,*) func_stripname '-Wl,' '' "$arg" args=$func_stripname_result arg= save_ifs="$IFS"; IFS=',' for flag in $args; do IFS="$save_ifs" func_quote_for_eval "$flag" arg="$arg $wl$func_quote_for_eval_result" compiler_flags="$compiler_flags $wl$func_quote_for_eval_result" linker_flags="$linker_flags $func_quote_for_eval_result" done IFS="$save_ifs" func_stripname ' ' '' "$arg" arg=$func_stripname_result ;; -Xcompiler) prev=xcompiler continue ;; -Xlinker) prev=xlinker continue ;; -XCClinker) prev=xcclinker continue ;; # -msg_* for osf cc -msg_*) func_quote_for_eval "$arg" arg="$func_quote_for_eval_result" ;; # -64, -mips[0-9] enable 64-bit mode on the SGI compiler # -r[0-9][0-9]* specifies the processor on the SGI compiler # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler # +DA*, +DD* enable 64-bit mode on the HP compiler # -q* pass through compiler args for the IBM compiler # -m*, -t[45]*, -txscale* pass through architecture-specific # compiler args for GCC # -F/path gives path to uninstalled frameworks, gcc on darwin # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC # @file GCC response files -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*) func_quote_for_eval "$arg" arg="$func_quote_for_eval_result" func_append compile_command " $arg" func_append finalize_command " $arg" compiler_flags="$compiler_flags $arg" continue ;; # Some other compiler flag. -* | +*) func_quote_for_eval "$arg" arg="$func_quote_for_eval_result" ;; *.$objext) # A standard object. objs="$objs $arg" ;; *.lo) # A libtool-controlled object. # Check to see that this really is a libtool object. if func_lalib_unsafe_p "$arg"; then pic_object= non_pic_object= # Read the .lo file func_source "$arg" if test -z "$pic_object" || test -z "$non_pic_object" || test "$pic_object" = none && test "$non_pic_object" = none; then func_fatal_error "cannot find name of object for \`$arg'" fi # Extract subdirectory from the argument. func_dirname "$arg" "/" "" xdir="$func_dirname_result" if test "$pic_object" != none; then # Prepend the subdirectory the object is found in. pic_object="$xdir$pic_object" if test "$prev" = dlfiles; then if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then dlfiles="$dlfiles $pic_object" prev= continue else # If libtool objects are unsupported, then we need to preload. prev=dlprefiles fi fi # CHECK ME: I think I busted this. -Ossama if test "$prev" = dlprefiles; then # Preload the old-style object. dlprefiles="$dlprefiles $pic_object" prev= fi # A PIC object. func_append libobjs " $pic_object" arg="$pic_object" fi # Non-PIC object. if test "$non_pic_object" != none; then # Prepend the subdirectory the object is found in. non_pic_object="$xdir$non_pic_object" # A standard non-PIC object func_append non_pic_objects " $non_pic_object" if test -z "$pic_object" || test "$pic_object" = none ; then arg="$non_pic_object" fi else # If the PIC object exists, use it instead. # $xdir was prepended to $pic_object above. non_pic_object="$pic_object" func_append non_pic_objects " $non_pic_object" fi else # Only an error if not doing a dry-run. if $opt_dry_run; then # Extract subdirectory from the argument. func_dirname "$arg" "/" "" xdir="$func_dirname_result" func_lo2o "$arg" pic_object=$xdir$objdir/$func_lo2o_result non_pic_object=$xdir$func_lo2o_result func_append libobjs " $pic_object" func_append non_pic_objects " $non_pic_object" else func_fatal_error "\`$arg' is not a valid libtool object" fi fi ;; *.$libext) # An archive. deplibs="$deplibs $arg" old_deplibs="$old_deplibs $arg" continue ;; *.la) # A libtool-controlled library. if test "$prev" = dlfiles; then # This library was specified with -dlopen. dlfiles="$dlfiles $arg" prev= elif test "$prev" = dlprefiles; then # The library was specified with -dlpreopen. dlprefiles="$dlprefiles $arg" prev= else deplibs="$deplibs $arg" fi continue ;; # Some other compiler argument. *) # Unknown arguments in both finalize_command and compile_command need # to be aesthetically quoted because they are evaled later. func_quote_for_eval "$arg" arg="$func_quote_for_eval_result" ;; esac # arg # Now actually substitute the argument into the commands. if test -n "$arg"; then func_append compile_command " $arg" func_append finalize_command " $arg" fi done # argument parsing loop test -n "$prev" && \ func_fatal_help "the \`$prevarg' option requires an argument" if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then eval arg=\"$export_dynamic_flag_spec\" func_append compile_command " $arg" func_append finalize_command " $arg" fi oldlibs= # calculate the name of the file, without its directory func_basename "$output" outputname="$func_basename_result" libobjs_save="$libobjs" if test -n "$shlibpath_var"; then # get the directories listed in $shlibpath_var eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` else shlib_search_path= fi eval sys_lib_search_path=\"$sys_lib_search_path_spec\" eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" func_dirname "$output" "/" "" output_objdir="$func_dirname_result$objdir" # Create the object directory. func_mkdir_p "$output_objdir" # Determine the type of output case $output in "") func_fatal_help "you must specify an output file" ;; *.$libext) linkmode=oldlib ;; *.lo | *.$objext) linkmode=obj ;; *.la) linkmode=lib ;; *) linkmode=prog ;; # Anything else should be a program. esac specialdeplibs= libs= # Find all interdependent deplibs by searching for libraries # that are linked more than once (e.g. -la -lb -la) for deplib in $deplibs; do if $opt_duplicate_deps ; then case "$libs " in *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac fi libs="$libs $deplib" done if test "$linkmode" = lib; then libs="$predeps $libs $compiler_lib_search_path $postdeps" # Compute libraries that are listed more than once in $predeps # $postdeps and mark them as special (i.e., whose duplicates are # not to be eliminated). pre_post_deps= if $opt_duplicate_compiler_generated_deps; then for pre_post_dep in $predeps $postdeps; do case "$pre_post_deps " in *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; esac pre_post_deps="$pre_post_deps $pre_post_dep" done fi pre_post_deps= fi deplibs= newdependency_libs= newlib_search_path= need_relink=no # whether we're linking any uninstalled libtool libraries notinst_deplibs= # not-installed libtool libraries notinst_path= # paths that contain not-installed libtool libraries case $linkmode in lib) passes="conv dlpreopen link" for file in $dlfiles $dlprefiles; do case $file in *.la) ;; *) func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file" ;; esac done ;; prog) compile_deplibs= finalize_deplibs= alldeplibs=no newdlfiles= newdlprefiles= passes="conv scan dlopen dlpreopen link" ;; *) passes="conv" ;; esac for pass in $passes; do # The preopen pass in lib mode reverses $deplibs; put it back here # so that -L comes before libs that need it for instance... if test "$linkmode,$pass" = "lib,link"; then ## FIXME: Find the place where the list is rebuilt in the wrong ## order, and fix it there properly tmp_deplibs= for deplib in $deplibs; do tmp_deplibs="$deplib $tmp_deplibs" done deplibs="$tmp_deplibs" fi if test "$linkmode,$pass" = "lib,link" || test "$linkmode,$pass" = "prog,scan"; then libs="$deplibs" deplibs= fi if test "$linkmode" = prog; then case $pass in dlopen) libs="$dlfiles" ;; dlpreopen) libs="$dlprefiles" ;; link) libs="$deplibs %DEPLIBS%" test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs" ;; esac fi if test "$linkmode,$pass" = "lib,dlpreopen"; then # Collect and forward deplibs of preopened libtool libs for lib in $dlprefiles; do # Ignore non-libtool-libs dependency_libs= case $lib in *.la) func_source "$lib" ;; esac # Collect preopened libtool deplibs, except any this library # has declared as weak libs for deplib in $dependency_libs; do deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"` case " $weak_libs " in *" $deplib_base "*) ;; *) deplibs="$deplibs $deplib" ;; esac done done libs="$dlprefiles" fi if test "$pass" = dlopen; then # Collect dlpreopened libraries save_deplibs="$deplibs" deplibs= fi for deplib in $libs; do lib= found=no case $deplib in -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else compiler_flags="$compiler_flags $deplib" if test "$linkmode" = lib ; then case "$new_inherited_linker_flags " in *" $deplib "*) ;; * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; esac fi fi continue ;; -l*) if test "$linkmode" != lib && test "$linkmode" != prog; then func_warning "\`-l' is ignored for archives/objects" continue fi func_stripname '-l' '' "$deplib" name=$func_stripname_result if test "$linkmode" = lib; then searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path" else searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path" fi for searchdir in $searchdirs; do for search_ext in .la $std_shrext .so .a; do # Search the libtool library lib="$searchdir/lib${name}${search_ext}" if test -f "$lib"; then if test "$search_ext" = ".la"; then found=yes else found=no fi break 2 fi done done if test "$found" != yes; then # deplib doesn't seem to be a libtool library if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else deplibs="$deplib $deplibs" test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" fi continue else # deplib is a libtool library # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, # We need to do some special things here, and not later. if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $deplib "*) if func_lalib_p "$lib"; then library_names= old_library= func_source "$lib" for l in $old_library $library_names; do ll="$l" done if test "X$ll" = "X$old_library" ; then # only static version available found=no func_dirname "$lib" "" "." ladir="$func_dirname_result" lib=$ladir/$old_library if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else deplibs="$deplib $deplibs" test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" fi continue fi fi ;; *) ;; esac fi fi ;; # -l *.ltframework) if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else deplibs="$deplib $deplibs" if test "$linkmode" = lib ; then case "$new_inherited_linker_flags " in *" $deplib "*) ;; * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; esac fi fi continue ;; -L*) case $linkmode in lib) deplibs="$deplib $deplibs" test "$pass" = conv && continue newdependency_libs="$deplib $newdependency_libs" func_stripname '-L' '' "$deplib" newlib_search_path="$newlib_search_path $func_stripname_result" ;; prog) if test "$pass" = conv; then deplibs="$deplib $deplibs" continue fi if test "$pass" = scan; then deplibs="$deplib $deplibs" else compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" fi func_stripname '-L' '' "$deplib" newlib_search_path="$newlib_search_path $func_stripname_result" ;; *) func_warning "\`-L' is ignored for archives/objects" ;; esac # linkmode continue ;; # -L -R*) if test "$pass" = link; then func_stripname '-R' '' "$deplib" dir=$func_stripname_result # Make sure the xrpath contains only unique directories. case "$xrpath " in *" $dir "*) ;; *) xrpath="$xrpath $dir" ;; esac fi deplibs="$deplib $deplibs" continue ;; *.la) lib="$deplib" ;; *.$libext) if test "$pass" = conv; then deplibs="$deplib $deplibs" continue fi case $linkmode in lib) # Linking convenience modules into shared libraries is allowed, # but linking other static libraries is non-portable. case " $dlpreconveniencelibs " in *" $deplib "*) ;; *) valid_a_lib=no case $deplibs_check_method in match_pattern*) set dummy $deplibs_check_method; shift match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \ | $EGREP "$match_pattern_regex" > /dev/null; then valid_a_lib=yes fi ;; pass_all) valid_a_lib=yes ;; esac if test "$valid_a_lib" != yes; then $ECHO $ECHO "*** Warning: Trying to link with static lib archive $deplib." $ECHO "*** I have the capability to make that library automatically link in when" $ECHO "*** you link to this library. But I can only do this if you have a" $ECHO "*** shared version of the library, which you do not appear to have" $ECHO "*** because the file extensions .$libext of this argument makes me believe" $ECHO "*** that it is just a static archive that I should not use here." else $ECHO $ECHO "*** Warning: Linking the shared library $output against the" $ECHO "*** static library $deplib is not portable!" deplibs="$deplib $deplibs" fi ;; esac continue ;; prog) if test "$pass" != link; then deplibs="$deplib $deplibs" else compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" fi continue ;; esac # linkmode ;; # *.$libext *.lo | *.$objext) if test "$pass" = conv; then deplibs="$deplib $deplibs" elif test "$linkmode" = prog; then if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then # If there is no dlopen support or we're linking statically, # we need to preload. newdlprefiles="$newdlprefiles $deplib" compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else newdlfiles="$newdlfiles $deplib" fi fi continue ;; %DEPLIBS%) alldeplibs=yes continue ;; esac # case $deplib if test "$found" = yes || test -f "$lib"; then : else func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'" fi # Check to see that this really is a libtool archive. func_lalib_unsafe_p "$lib" \ || func_fatal_error "\`$lib' is not a valid libtool archive" func_dirname "$lib" "" "." ladir="$func_dirname_result" dlname= dlopen= dlpreopen= libdir= library_names= old_library= inherited_linker_flags= # If the library was installed with an old release of libtool, # it will not redefine variables installed, or shouldnotlink installed=yes shouldnotlink=no avoidtemprpath= # Read the .la file func_source "$lib" # Convert "-framework foo" to "foo.ltframework" if test -n "$inherited_linker_flags"; then tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'` for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do case " $new_inherited_linker_flags " in *" $tmp_inherited_linker_flag "*) ;; *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";; esac done fi dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` if test "$linkmode,$pass" = "lib,link" || test "$linkmode,$pass" = "prog,scan" || { test "$linkmode" != prog && test "$linkmode" != lib; }; then test -n "$dlopen" && dlfiles="$dlfiles $dlopen" test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" fi if test "$pass" = conv; then # Only check for convenience libraries deplibs="$lib $deplibs" if test -z "$libdir"; then if test -z "$old_library"; then func_fatal_error "cannot find name of link library for \`$lib'" fi # It is a libtool convenience library, so add in its objects. convenience="$convenience $ladir/$objdir/$old_library" old_convenience="$old_convenience $ladir/$objdir/$old_library" tmp_libs= for deplib in $dependency_libs; do deplibs="$deplib $deplibs" if $opt_duplicate_deps ; then case "$tmp_libs " in *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac fi tmp_libs="$tmp_libs $deplib" done elif test "$linkmode" != prog && test "$linkmode" != lib; then func_fatal_error "\`$lib' is not a convenience library" fi continue fi # $pass = conv # Get the name of the library we link against. linklib= for l in $old_library $library_names; do linklib="$l" done if test -z "$linklib"; then func_fatal_error "cannot find name of link library for \`$lib'" fi # This library was specified with -dlopen. if test "$pass" = dlopen; then if test -z "$libdir"; then func_fatal_error "cannot -dlopen a convenience library: \`$lib'" fi if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then # If there is no dlname, no dlopen support or we're linking # statically, we need to preload. We also need to preload any # dependent libraries so libltdl's deplib preloader doesn't # bomb out in the load deplibs phase. dlprefiles="$dlprefiles $lib $dependency_libs" else newdlfiles="$newdlfiles $lib" fi continue fi # $pass = dlopen # We need an absolute path. case $ladir in [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; *) abs_ladir=`cd "$ladir" && pwd` if test -z "$abs_ladir"; then func_warning "cannot determine absolute directory name of \`$ladir'" func_warning "passing it literally to the linker, although it might fail" abs_ladir="$ladir" fi ;; esac func_basename "$lib" laname="$func_basename_result" # Find the relevant object directory and library name. if test "X$installed" = Xyes; then if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then func_warning "library \`$lib' was moved." dir="$ladir" absdir="$abs_ladir" libdir="$abs_ladir" else dir="$libdir" absdir="$libdir" fi test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes else if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then dir="$ladir" absdir="$abs_ladir" # Remove this search path later notinst_path="$notinst_path $abs_ladir" else dir="$ladir/$objdir" absdir="$abs_ladir/$objdir" # Remove this search path later notinst_path="$notinst_path $abs_ladir" fi fi # $installed = yes func_stripname 'lib' '.la' "$laname" name=$func_stripname_result # This library was specified with -dlpreopen. if test "$pass" = dlpreopen; then if test -z "$libdir" && test "$linkmode" = prog; then func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'" fi # Prefer using a static library (so that no silly _DYNAMIC symbols # are required to link). if test -n "$old_library"; then newdlprefiles="$newdlprefiles $dir/$old_library" # Keep a list of preopened convenience libraries to check # that they are being used correctly in the link pass. test -z "$libdir" && \ dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library" # Otherwise, use the dlname, so that lt_dlopen finds it. elif test -n "$dlname"; then newdlprefiles="$newdlprefiles $dir/$dlname" else newdlprefiles="$newdlprefiles $dir/$linklib" fi fi # $pass = dlpreopen if test -z "$libdir"; then # Link the convenience library if test "$linkmode" = lib; then deplibs="$dir/$old_library $deplibs" elif test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$dir/$old_library $compile_deplibs" finalize_deplibs="$dir/$old_library $finalize_deplibs" else deplibs="$lib $deplibs" # used for prog,scan pass fi continue fi if test "$linkmode" = prog && test "$pass" != link; then newlib_search_path="$newlib_search_path $ladir" deplibs="$lib $deplibs" linkalldeplibs=no if test "$link_all_deplibs" != no || test -z "$library_names" || test "$build_libtool_libs" = no; then linkalldeplibs=yes fi tmp_libs= for deplib in $dependency_libs; do case $deplib in -L*) func_stripname '-L' '' "$deplib" newlib_search_path="$newlib_search_path $func_stripname_result" ;; esac # Need to link against all dependency_libs? if test "$linkalldeplibs" = yes; then deplibs="$deplib $deplibs" else # Need to hardcode shared library paths # or/and link against static libraries newdependency_libs="$deplib $newdependency_libs" fi if $opt_duplicate_deps ; then case "$tmp_libs " in *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac fi tmp_libs="$tmp_libs $deplib" done # for deplib continue fi # $linkmode = prog... if test "$linkmode,$pass" = "prog,link"; then if test -n "$library_names" && { { test "$prefer_static_libs" = no || test "$prefer_static_libs,$installed" = "built,yes"; } || test -z "$old_library"; }; then # We need to hardcode the library path if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then # Make sure the rpath contains only unique directories. case "$temp_rpath:" in *"$absdir:"*) ;; *) temp_rpath="$temp_rpath$absdir:" ;; esac fi # Hardcode the library path. # Skip directories that are in the system default run-time # search path. case " $sys_lib_dlsearch_path " in *" $absdir "*) ;; *) case "$compile_rpath " in *" $absdir "*) ;; *) compile_rpath="$compile_rpath $absdir" esac ;; esac case " $sys_lib_dlsearch_path " in *" $libdir "*) ;; *) case "$finalize_rpath " in *" $libdir "*) ;; *) finalize_rpath="$finalize_rpath $libdir" esac ;; esac fi # $linkmode,$pass = prog,link... if test "$alldeplibs" = yes && { test "$deplibs_check_method" = pass_all || { test "$build_libtool_libs" = yes && test -n "$library_names"; }; }; then # We only need to search for static libraries continue fi fi link_static=no # Whether the deplib will be linked statically use_static_libs=$prefer_static_libs if test "$use_static_libs" = built && test "$installed" = yes; then use_static_libs=no fi if test -n "$library_names" && { test "$use_static_libs" = no || test -z "$old_library"; }; then case $host in *cygwin* | *mingw* | *cegcc*) # No point in relinking DLLs because paths are not encoded notinst_deplibs="$notinst_deplibs $lib" need_relink=no ;; *) if test "$installed" = no; then notinst_deplibs="$notinst_deplibs $lib" need_relink=yes fi ;; esac # This is a shared library # Warn about portability, can't link against -module's on some # systems (darwin). Don't bleat about dlopened modules though! dlopenmodule="" for dlpremoduletest in $dlprefiles; do if test "X$dlpremoduletest" = "X$lib"; then dlopenmodule="$dlpremoduletest" break fi done if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then $ECHO if test "$linkmode" = prog; then $ECHO "*** Warning: Linking the executable $output against the loadable module" else $ECHO "*** Warning: Linking the shared library $output against the loadable module" fi $ECHO "*** $linklib is not portable!" fi if test "$linkmode" = lib && test "$hardcode_into_libs" = yes; then # Hardcode the library path. # Skip directories that are in the system default run-time # search path. case " $sys_lib_dlsearch_path " in *" $absdir "*) ;; *) case "$compile_rpath " in *" $absdir "*) ;; *) compile_rpath="$compile_rpath $absdir" esac ;; esac case " $sys_lib_dlsearch_path " in *" $libdir "*) ;; *) case "$finalize_rpath " in *" $libdir "*) ;; *) finalize_rpath="$finalize_rpath $libdir" esac ;; esac fi if test -n "$old_archive_from_expsyms_cmds"; then # figure out the soname set dummy $library_names shift realname="$1" shift libname=`eval "\\$ECHO \"$libname_spec\""` # use dlname if we got it. it's perfectly good, no? if test -n "$dlname"; then soname="$dlname" elif test -n "$soname_spec"; then # bleh windows case $host in *cygwin* | mingw* | *cegcc*) func_arith $current - $age major=$func_arith_result versuffix="-$major" ;; esac eval soname=\"$soname_spec\" else soname="$realname" fi # Make a new name for the extract_expsyms_cmds to use soroot="$soname" func_basename "$soroot" soname="$func_basename_result" func_stripname 'lib' '.dll' "$soname" newlib=libimp-$func_stripname_result.a # If the library has no export list, then create one now if test -f "$output_objdir/$soname-def"; then : else func_verbose "extracting exported symbol list from \`$soname'" func_execute_cmds "$extract_expsyms_cmds" 'exit $?' fi # Create $newlib if test -f "$output_objdir/$newlib"; then :; else func_verbose "generating import library for \`$soname'" func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?' fi # make sure the library variables are pointing to the new library dir=$output_objdir linklib=$newlib fi # test -n "$old_archive_from_expsyms_cmds" if test "$linkmode" = prog || test "$mode" != relink; then add_shlibpath= add_dir= add= lib_linked=yes case $hardcode_action in immediate | unsupported) if test "$hardcode_direct" = no; then add="$dir/$linklib" case $host in *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; *-*-sysv4*uw2*) add_dir="-L$dir" ;; *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ *-*-unixware7*) add_dir="-L$dir" ;; *-*-darwin* ) # if the lib is a (non-dlopened) module then we can not # link against it, someone is ignoring the earlier warnings if /usr/bin/file -L $add 2> /dev/null | $GREP ": [^:]* bundle" >/dev/null ; then if test "X$dlopenmodule" != "X$lib"; then $ECHO "*** Warning: lib $linklib is a module, not a shared library" if test -z "$old_library" ; then $ECHO $ECHO "*** And there doesn't seem to be a static archive available" $ECHO "*** The link will probably fail, sorry" else add="$dir/$old_library" fi elif test -n "$old_library"; then add="$dir/$old_library" fi fi esac elif test "$hardcode_minus_L" = no; then case $host in *-*-sunos*) add_shlibpath="$dir" ;; esac add_dir="-L$dir" add="-l$name" elif test "$hardcode_shlibpath_var" = no; then add_shlibpath="$dir" add="-l$name" else lib_linked=no fi ;; relink) if test "$hardcode_direct" = yes && test "$hardcode_direct_absolute" = no; then add="$dir/$linklib" elif test "$hardcode_minus_L" = yes; then add_dir="-L$dir" # Try looking first in the location we're being installed to. if test -n "$inst_prefix_dir"; then case $libdir in [\\/]*) add_dir="$add_dir -L$inst_prefix_dir$libdir" ;; esac fi add="-l$name" elif test "$hardcode_shlibpath_var" = yes; then add_shlibpath="$dir" add="-l$name" else lib_linked=no fi ;; *) lib_linked=no ;; esac if test "$lib_linked" != yes; then func_fatal_configuration "unsupported hardcode properties" fi if test -n "$add_shlibpath"; then case :$compile_shlibpath: in *":$add_shlibpath:"*) ;; *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; esac fi if test "$linkmode" = prog; then test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" test -n "$add" && compile_deplibs="$add $compile_deplibs" else test -n "$add_dir" && deplibs="$add_dir $deplibs" test -n "$add" && deplibs="$add $deplibs" if test "$hardcode_direct" != yes && test "$hardcode_minus_L" != yes && test "$hardcode_shlibpath_var" = yes; then case :$finalize_shlibpath: in *":$libdir:"*) ;; *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; esac fi fi fi if test "$linkmode" = prog || test "$mode" = relink; then add_shlibpath= add_dir= add= # Finalize command for both is simple: just hardcode it. if test "$hardcode_direct" = yes && test "$hardcode_direct_absolute" = no; then add="$libdir/$linklib" elif test "$hardcode_minus_L" = yes; then add_dir="-L$libdir" add="-l$name" elif test "$hardcode_shlibpath_var" = yes; then case :$finalize_shlibpath: in *":$libdir:"*) ;; *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; esac add="-l$name" elif test "$hardcode_automatic" = yes; then if test -n "$inst_prefix_dir" && test -f "$inst_prefix_dir$libdir/$linklib" ; then add="$inst_prefix_dir$libdir/$linklib" else add="$libdir/$linklib" fi else # We cannot seem to hardcode it, guess we'll fake it. add_dir="-L$libdir" # Try looking first in the location we're being installed to. if test -n "$inst_prefix_dir"; then case $libdir in [\\/]*) add_dir="$add_dir -L$inst_prefix_dir$libdir" ;; esac fi add="-l$name" fi if test "$linkmode" = prog; then test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" test -n "$add" && finalize_deplibs="$add $finalize_deplibs" else test -n "$add_dir" && deplibs="$add_dir $deplibs" test -n "$add" && deplibs="$add $deplibs" fi fi elif test "$linkmode" = prog; then # Here we assume that one of hardcode_direct or hardcode_minus_L # is not unsupported. This is valid on all known static and # shared platforms. if test "$hardcode_direct" != unsupported; then test -n "$old_library" && linklib="$old_library" compile_deplibs="$dir/$linklib $compile_deplibs" finalize_deplibs="$dir/$linklib $finalize_deplibs" else compile_deplibs="-l$name -L$dir $compile_deplibs" finalize_deplibs="-l$name -L$dir $finalize_deplibs" fi elif test "$build_libtool_libs" = yes; then # Not a shared library if test "$deplibs_check_method" != pass_all; then # We're trying link a shared library against a static one # but the system doesn't support it. # Just print a warning and add the library to dependency_libs so # that the program can be linked against the static library. $ECHO $ECHO "*** Warning: This system can not link to static lib archive $lib." $ECHO "*** I have the capability to make that library automatically link in when" $ECHO "*** you link to this library. But I can only do this if you have a" $ECHO "*** shared version of the library, which you do not appear to have." if test "$module" = yes; then $ECHO "*** But as you try to build a module library, libtool will still create " $ECHO "*** a static module, that should work as long as the dlopening application" $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime." if test -z "$global_symbol_pipe"; then $ECHO $ECHO "*** However, this would only work if libtool was able to extract symbol" $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could" $ECHO "*** not find such a program. So, this module is probably useless." $ECHO "*** \`nm' from GNU binutils and a full rebuild may help." fi if test "$build_old_libs" = no; then build_libtool_libs=module build_old_libs=yes else build_libtool_libs=no fi fi else deplibs="$dir/$old_library $deplibs" link_static=yes fi fi # link shared/static library? if test "$linkmode" = lib; then if test -n "$dependency_libs" && { test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes || test "$link_static" = yes; }; then # Extract -R from dependency_libs temp_deplibs= for libdir in $dependency_libs; do case $libdir in -R*) func_stripname '-R' '' "$libdir" temp_xrpath=$func_stripname_result case " $xrpath " in *" $temp_xrpath "*) ;; *) xrpath="$xrpath $temp_xrpath";; esac;; *) temp_deplibs="$temp_deplibs $libdir";; esac done dependency_libs="$temp_deplibs" fi newlib_search_path="$newlib_search_path $absdir" # Link against this library test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" # ... and its dependency_libs tmp_libs= for deplib in $dependency_libs; do newdependency_libs="$deplib $newdependency_libs" if $opt_duplicate_deps ; then case "$tmp_libs " in *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac fi tmp_libs="$tmp_libs $deplib" done if test "$link_all_deplibs" != no; then # Add the search paths of all dependency libraries for deplib in $dependency_libs; do path= case $deplib in -L*) path="$deplib" ;; *.la) func_dirname "$deplib" "" "." dir="$func_dirname_result" # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; *) absdir=`cd "$dir" && pwd` if test -z "$absdir"; then func_warning "cannot determine absolute directory name of \`$dir'" absdir="$dir" fi ;; esac if $GREP "^installed=no" $deplib > /dev/null; then case $host in *-*-darwin*) depdepl= eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` if test -n "$deplibrary_names" ; then for tmp in $deplibrary_names ; do depdepl=$tmp done if test -f "$absdir/$objdir/$depdepl" ; then depdepl="$absdir/$objdir/$depdepl" darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` if test -z "$darwin_install_name"; then darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` fi compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}" path= fi fi ;; *) path="-L$absdir/$objdir" ;; esac else eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` test -z "$libdir" && \ func_fatal_error "\`$deplib' is not a valid libtool archive" test "$absdir" != "$libdir" && \ func_warning "\`$deplib' seems to be moved" path="-L$absdir" fi ;; esac case " $deplibs " in *" $path "*) ;; *) deplibs="$path $deplibs" ;; esac done fi # link_all_deplibs != no fi # linkmode = lib done # for deplib in $libs if test "$pass" = link; then if test "$linkmode" = "prog"; then compile_deplibs="$new_inherited_linker_flags $compile_deplibs" finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" else compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` fi fi dependency_libs="$newdependency_libs" if test "$pass" = dlpreopen; then # Link the dlpreopened libraries before other libraries for deplib in $save_deplibs; do deplibs="$deplib $deplibs" done fi if test "$pass" != dlopen; then if test "$pass" != conv; then # Make sure lib_search_path contains only unique directories. lib_search_path= for dir in $newlib_search_path; do case "$lib_search_path " in *" $dir "*) ;; *) lib_search_path="$lib_search_path $dir" ;; esac done newlib_search_path= fi if test "$linkmode,$pass" != "prog,link"; then vars="deplibs" else vars="compile_deplibs finalize_deplibs" fi for var in $vars dependency_libs; do # Add libraries to $var in reverse order eval tmp_libs=\"\$$var\" new_libs= for deplib in $tmp_libs; do # FIXME: Pedantically, this is the right thing to do, so # that some nasty dependency loop isn't accidentally # broken: #new_libs="$deplib $new_libs" # Pragmatically, this seems to cause very few problems in # practice: case $deplib in -L*) new_libs="$deplib $new_libs" ;; -R*) ;; *) # And here is the reason: when a library appears more # than once as an explicit dependence of a library, or # is implicitly linked in more than once by the # compiler, it is considered special, and multiple # occurrences thereof are not removed. Compare this # with having the same library being listed as a # dependency of multiple other libraries: in this case, # we know (pedantically, we assume) the library does not # need to be listed more than once, so we keep only the # last copy. This is not always right, but it is rare # enough that we require users that really mean to play # such unportable linking tricks to link the library # using -Wl,-lname, so that libtool does not consider it # for duplicate removal. case " $specialdeplibs " in *" $deplib "*) new_libs="$deplib $new_libs" ;; *) case " $new_libs " in *" $deplib "*) ;; *) new_libs="$deplib $new_libs" ;; esac ;; esac ;; esac done tmp_libs= for deplib in $new_libs; do case $deplib in -L*) case " $tmp_libs " in *" $deplib "*) ;; *) tmp_libs="$tmp_libs $deplib" ;; esac ;; *) tmp_libs="$tmp_libs $deplib" ;; esac done eval $var=\"$tmp_libs\" done # for var fi # Last step: remove runtime libs from dependency_libs # (they stay in deplibs) tmp_libs= for i in $dependency_libs ; do case " $predeps $postdeps $compiler_lib_search_path " in *" $i "*) i="" ;; esac if test -n "$i" ; then tmp_libs="$tmp_libs $i" fi done dependency_libs=$tmp_libs done # for pass if test "$linkmode" = prog; then dlfiles="$newdlfiles" fi if test "$linkmode" = prog || test "$linkmode" = lib; then dlprefiles="$newdlprefiles" fi case $linkmode in oldlib) if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then func_warning "\`-dlopen' is ignored for archives" fi case " $deplibs" in *\ -l* | *\ -L*) func_warning "\`-l' and \`-L' are ignored for archives" ;; esac test -n "$rpath" && \ func_warning "\`-rpath' is ignored for archives" test -n "$xrpath" && \ func_warning "\`-R' is ignored for archives" test -n "$vinfo" && \ func_warning "\`-version-info/-version-number' is ignored for archives" test -n "$release" && \ func_warning "\`-release' is ignored for archives" test -n "$export_symbols$export_symbols_regex" && \ func_warning "\`-export-symbols' is ignored for archives" # Now set the variables for building old libraries. build_libtool_libs=no oldlibs="$output" objs="$objs$old_deplibs" ;; lib) # Make sure we only generate libraries of the form `libNAME.la'. case $outputname in lib*) func_stripname 'lib' '.la' "$outputname" name=$func_stripname_result eval shared_ext=\"$shrext_cmds\" eval libname=\"$libname_spec\" ;; *) test "$module" = no && \ func_fatal_help "libtool library \`$output' must begin with \`lib'" if test "$need_lib_prefix" != no; then # Add the "lib" prefix for modules if required func_stripname '' '.la' "$outputname" name=$func_stripname_result eval shared_ext=\"$shrext_cmds\" eval libname=\"$libname_spec\" else func_stripname '' '.la' "$outputname" libname=$func_stripname_result fi ;; esac if test -n "$objs"; then if test "$deplibs_check_method" != pass_all; then func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs" else $ECHO $ECHO "*** Warning: Linking the shared library $output against the non-libtool" $ECHO "*** objects $objs is not portable!" libobjs="$libobjs $objs" fi fi test "$dlself" != no && \ func_warning "\`-dlopen self' is ignored for libtool libraries" set dummy $rpath shift test "$#" -gt 1 && \ func_warning "ignoring multiple \`-rpath's for a libtool library" install_libdir="$1" oldlibs= if test -z "$rpath"; then if test "$build_libtool_libs" = yes; then # Building a libtool convenience library. # Some compilers have problems with a `.al' extension so # convenience libraries should have the same extension an # archive normally would. oldlibs="$output_objdir/$libname.$libext $oldlibs" build_libtool_libs=convenience build_old_libs=yes fi test -n "$vinfo" && \ func_warning "\`-version-info/-version-number' is ignored for convenience libraries" test -n "$release" && \ func_warning "\`-release' is ignored for convenience libraries" else # Parse the version information argument. save_ifs="$IFS"; IFS=':' set dummy $vinfo 0 0 0 shift IFS="$save_ifs" test -n "$7" && \ func_fatal_help "too many parameters to \`-version-info'" # convert absolute version numbers to libtool ages # this retains compatibility with .la files and attempts # to make the code below a bit more comprehensible case $vinfo_number in yes) number_major="$1" number_minor="$2" number_revision="$3" # # There are really only two kinds -- those that # use the current revision as the major version # and those that subtract age and use age as # a minor version. But, then there is irix # which has an extra 1 added just for fun # case $version_type in darwin|linux|osf|windows|none) func_arith $number_major + $number_minor current=$func_arith_result age="$number_minor" revision="$number_revision" ;; freebsd-aout|freebsd-elf|sunos) current="$number_major" revision="$number_minor" age="0" ;; irix|nonstopux) func_arith $number_major + $number_minor current=$func_arith_result age="$number_minor" revision="$number_minor" lt_irix_increment=no ;; *) func_fatal_configuration "$modename: unknown library version type \`$version_type'" ;; esac ;; no) current="$1" revision="$2" age="$3" ;; esac # Check that each of the things are valid numbers. case $current in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) func_error "CURRENT \`$current' must be a nonnegative integer" func_fatal_error "\`$vinfo' is not valid version information" ;; esac case $revision in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) func_error "REVISION \`$revision' must be a nonnegative integer" func_fatal_error "\`$vinfo' is not valid version information" ;; esac case $age in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) func_error "AGE \`$age' must be a nonnegative integer" func_fatal_error "\`$vinfo' is not valid version information" ;; esac if test "$age" -gt "$current"; then func_error "AGE \`$age' is greater than the current interface number \`$current'" func_fatal_error "\`$vinfo' is not valid version information" fi # Calculate the version variables. major= versuffix= verstring= case $version_type in none) ;; darwin) # Like Linux, but with the current version available in # verstring for coding it into the library header func_arith $current - $age major=.$func_arith_result versuffix="$major.$age.$revision" # Darwin ld doesn't like 0 for these options... func_arith $current + 1 minor_current=$func_arith_result xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" ;; freebsd-aout) major=".$current" versuffix=".$current.$revision"; ;; freebsd-elf) major=".$current" versuffix=".$current" ;; irix | nonstopux) if test "X$lt_irix_increment" = "Xno"; then func_arith $current - $age else func_arith $current - $age + 1 fi major=$func_arith_result case $version_type in nonstopux) verstring_prefix=nonstopux ;; *) verstring_prefix=sgi ;; esac verstring="$verstring_prefix$major.$revision" # Add in all the interfaces that we are compatible with. loop=$revision while test "$loop" -ne 0; do func_arith $revision - $loop iface=$func_arith_result func_arith $loop - 1 loop=$func_arith_result verstring="$verstring_prefix$major.$iface:$verstring" done # Before this point, $major must not contain `.'. major=.$major versuffix="$major.$revision" ;; linux) func_arith $current - $age major=.$func_arith_result versuffix="$major.$age.$revision" ;; osf) func_arith $current - $age major=.$func_arith_result versuffix=".$current.$age.$revision" verstring="$current.$age.$revision" # Add in all the interfaces that we are compatible with. loop=$age while test "$loop" -ne 0; do func_arith $current - $loop iface=$func_arith_result func_arith $loop - 1 loop=$func_arith_result verstring="$verstring:${iface}.0" done # Make executables depend on our current version. verstring="$verstring:${current}.0" ;; qnx) major=".$current" versuffix=".$current" ;; sunos) major=".$current" versuffix=".$current.$revision" ;; windows) # Use '-' rather than '.', since we only want one # extension on DOS 8.3 filesystems. func_arith $current - $age major=$func_arith_result versuffix="-$major" ;; *) func_fatal_configuration "unknown library version type \`$version_type'" ;; esac # Clear the version info if we defaulted, and they specified a release. if test -z "$vinfo" && test -n "$release"; then major= case $version_type in darwin) # we can't check for "0.0" in archive_cmds due to quoting # problems, so we reset it completely verstring= ;; *) verstring="0.0" ;; esac if test "$need_version" = no; then versuffix= else versuffix=".0.0" fi fi # Remove version info from name if versioning should be avoided if test "$avoid_version" = yes && test "$need_version" = no; then major= versuffix= verstring="" fi # Check to see if the archive will have undefined symbols. if test "$allow_undefined" = yes; then if test "$allow_undefined_flag" = unsupported; then func_warning "undefined symbols not allowed in $host shared libraries" build_libtool_libs=no build_old_libs=yes fi else # Don't allow undefined symbols. allow_undefined_flag="$no_undefined_flag" fi fi func_generate_dlsyms "$libname" "$libname" "yes" libobjs="$libobjs $symfileobj" test "X$libobjs" = "X " && libobjs= if test "$mode" != relink; then # Remove our outputs, but don't remove object files since they # may have been created when compiling PIC objects. removelist= tempremovelist=`$ECHO "$output_objdir/*"` for p in $tempremovelist; do case $p in *.$objext | *.gcno) ;; $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) if test "X$precious_files_regex" != "X"; then if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 then continue fi fi removelist="$removelist $p" ;; *) ;; esac done test -n "$removelist" && \ func_show_eval "${RM}r \$removelist" fi # Now set the variables for building old libraries. if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then oldlibs="$oldlibs $output_objdir/$libname.$libext" # Transform .lo files to .o files. oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` fi # Eliminate all temporary directories. #for path in $notinst_path; do # lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"` # deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"` # dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"` #done if test -n "$xrpath"; then # If the user specified any rpath flags, then add them. temp_xrpath= for libdir in $xrpath; do temp_xrpath="$temp_xrpath -R$libdir" case "$finalize_rpath " in *" $libdir "*) ;; *) finalize_rpath="$finalize_rpath $libdir" ;; esac done if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then dependency_libs="$temp_xrpath $dependency_libs" fi fi # Make sure dlfiles contains only unique files that won't be dlpreopened old_dlfiles="$dlfiles" dlfiles= for lib in $old_dlfiles; do case " $dlprefiles $dlfiles " in *" $lib "*) ;; *) dlfiles="$dlfiles $lib" ;; esac done # Make sure dlprefiles contains only unique files old_dlprefiles="$dlprefiles" dlprefiles= for lib in $old_dlprefiles; do case "$dlprefiles " in *" $lib "*) ;; *) dlprefiles="$dlprefiles $lib" ;; esac done if test "$build_libtool_libs" = yes; then if test -n "$rpath"; then case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc*) # these systems don't actually have a c library (as such)! ;; *-*-rhapsody* | *-*-darwin1.[012]) # Rhapsody C library is in the System framework deplibs="$deplibs System.ltframework" ;; *-*-netbsd*) # Don't link with libc until the a.out ld.so is fixed. ;; *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) # Do not include libc due to us having libc/libc_r. ;; *-*-sco3.2v5* | *-*-sco5v6*) # Causes problems with __ctype ;; *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) # Compiler inserts libc in the correct place for threads to work ;; *) # Add libc to deplibs on all other systems if necessary. if test "$build_libtool_need_lc" = "yes"; then deplibs="$deplibs -lc" fi ;; esac fi # Transform deplibs into only deplibs that can be linked in shared. name_save=$name libname_save=$libname release_save=$release versuffix_save=$versuffix major_save=$major # I'm not sure if I'm treating the release correctly. I think # release should show up in the -l (ie -lgmp5) so we don't want to # add it in twice. Is that correct? release="" versuffix="" major="" newdeplibs= droppeddeps=no case $deplibs_check_method in pass_all) # Don't check for shared/static. Everything works. # This might be a little naive. We might want to check # whether the library exists or not. But this is on # osf3 & osf4 and I'm not really sure... Just # implementing what was already the behavior. newdeplibs=$deplibs ;; test_compile) # This code stresses the "libraries are programs" paradigm to its # limits. Maybe even breaks it. We compile a program, linking it # against the deplibs as a proxy for the library. Then we can check # whether they linked in statically or dynamically with ldd. $opt_dry_run || $RM conftest.c cat > conftest.c </dev/null` for potent_lib in $potential_libs; do # Follow soft links. if ls -lLd "$potent_lib" 2>/dev/null | $GREP " -> " >/dev/null; then continue fi # The statement above tries to avoid entering an # endless loop below, in case of cyclic links. # We might still enter an endless loop, since a link # loop can be closed while we follow links, # but so what? potlib="$potent_lib" while test -h "$potlib" 2>/dev/null; do potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` case $potliblink in [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; *) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; esac done if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | $SED -e 10q | $EGREP "$file_magic_regex" > /dev/null; then newdeplibs="$newdeplibs $a_deplib" a_deplib="" break 2 fi done done fi if test -n "$a_deplib" ; then droppeddeps=yes $ECHO $ECHO "*** Warning: linker path does not have real file for library $a_deplib." $ECHO "*** I have the capability to make that library automatically link in when" $ECHO "*** you link to this library. But I can only do this if you have a" $ECHO "*** shared version of the library, which you do not appear to have" $ECHO "*** because I did check the linker path looking for a file starting" if test -z "$potlib" ; then $ECHO "*** with $libname but no candidates were found. (...for file magic test)" else $ECHO "*** with $libname and none of the candidates passed a file format test" $ECHO "*** using a file magic. Last file checked: $potlib" fi fi ;; *) # Add a -L argument. newdeplibs="$newdeplibs $a_deplib" ;; esac done # Gone through all deplibs. ;; match_pattern*) set dummy $deplibs_check_method; shift match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` for a_deplib in $deplibs; do case $a_deplib in -l*) func_stripname -l '' "$a_deplib" name=$func_stripname_result if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $a_deplib "*) newdeplibs="$newdeplibs $a_deplib" a_deplib="" ;; esac fi if test -n "$a_deplib" ; then libname=`eval "\\$ECHO \"$libname_spec\""` for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do potential_libs=`ls $i/$libname[.-]* 2>/dev/null` for potent_lib in $potential_libs; do potlib="$potent_lib" # see symlink-check above in file_magic test if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \ $EGREP "$match_pattern_regex" > /dev/null; then newdeplibs="$newdeplibs $a_deplib" a_deplib="" break 2 fi done done fi if test -n "$a_deplib" ; then droppeddeps=yes $ECHO $ECHO "*** Warning: linker path does not have real file for library $a_deplib." $ECHO "*** I have the capability to make that library automatically link in when" $ECHO "*** you link to this library. But I can only do this if you have a" $ECHO "*** shared version of the library, which you do not appear to have" $ECHO "*** because I did check the linker path looking for a file starting" if test -z "$potlib" ; then $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" else $ECHO "*** with $libname and none of the candidates passed a file format test" $ECHO "*** using a regex pattern. Last file checked: $potlib" fi fi ;; *) # Add a -L argument. newdeplibs="$newdeplibs $a_deplib" ;; esac done # Gone through all deplibs. ;; none | unknown | *) newdeplibs="" tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \ -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'` if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then for i in $predeps $postdeps ; do # can't use Xsed below, because $i might contain '/' tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"` done fi if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' | $GREP . >/dev/null; then $ECHO if test "X$deplibs_check_method" = "Xnone"; then $ECHO "*** Warning: inter-library dependencies are not supported in this platform." else $ECHO "*** Warning: inter-library dependencies are not known to be supported." fi $ECHO "*** All declared inter-library dependencies are being dropped." droppeddeps=yes fi ;; esac versuffix=$versuffix_save major=$major_save release=$release_save libname=$libname_save name=$name_save case $host in *-*-rhapsody* | *-*-darwin1.[012]) # On Rhapsody replace the C library with the System framework newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'` ;; esac if test "$droppeddeps" = yes; then if test "$module" = yes; then $ECHO $ECHO "*** Warning: libtool could not satisfy all declared inter-library" $ECHO "*** dependencies of module $libname. Therefore, libtool will create" $ECHO "*** a static module, that should work as long as the dlopening" $ECHO "*** application is linked with the -dlopen flag." if test -z "$global_symbol_pipe"; then $ECHO $ECHO "*** However, this would only work if libtool was able to extract symbol" $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could" $ECHO "*** not find such a program. So, this module is probably useless." $ECHO "*** \`nm' from GNU binutils and a full rebuild may help." fi if test "$build_old_libs" = no; then oldlibs="$output_objdir/$libname.$libext" build_libtool_libs=module build_old_libs=yes else build_libtool_libs=no fi else $ECHO "*** The inter-library dependencies that have been dropped here will be" $ECHO "*** automatically added whenever a program is linked with this library" $ECHO "*** or is declared to -dlopen it." if test "$allow_undefined" = no; then $ECHO $ECHO "*** Since this library must not contain undefined symbols," $ECHO "*** because either the platform does not support them or" $ECHO "*** it was explicitly requested with -no-undefined," $ECHO "*** libtool will only create a static version of it." if test "$build_old_libs" = no; then oldlibs="$output_objdir/$libname.$libext" build_libtool_libs=module build_old_libs=yes else build_libtool_libs=no fi fi fi fi # Done checking deplibs! deplibs=$newdeplibs fi # Time to change all our "foo.ltframework" stuff back to "-framework foo" case $host in *-*-darwin*) newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` ;; esac # move library search paths that coincide with paths to not yet # installed libraries to the beginning of the library search list new_libs= for path in $notinst_path; do case " $new_libs " in *" -L$path/$objdir "*) ;; *) case " $deplibs " in *" -L$path/$objdir "*) new_libs="$new_libs -L$path/$objdir" ;; esac ;; esac done for deplib in $deplibs; do case $deplib in -L*) case " $new_libs " in *" $deplib "*) ;; *) new_libs="$new_libs $deplib" ;; esac ;; *) new_libs="$new_libs $deplib" ;; esac done deplibs="$new_libs" # All the library-specific variables (install_libdir is set above). library_names= old_library= dlname= # Test again, we may have decided not to build it any more if test "$build_libtool_libs" = yes; then if test "$hardcode_into_libs" = yes; then # Hardcode the library paths hardcode_libdirs= dep_rpath= rpath="$finalize_rpath" test "$mode" != relink && rpath="$compile_rpath$rpath" for libdir in $rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then if test -z "$hardcode_libdirs"; then hardcode_libdirs="$libdir" else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" dep_rpath="$dep_rpath $flag" fi elif test -n "$runpath_var"; then case "$perm_rpath " in *" $libdir "*) ;; *) perm_rpath="$perm_rpath $libdir" ;; esac fi done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" if test -n "$hardcode_libdir_flag_spec_ld"; then eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" else eval dep_rpath=\"$hardcode_libdir_flag_spec\" fi fi if test -n "$runpath_var" && test -n "$perm_rpath"; then # We should set the runpath_var. rpath= for dir in $perm_rpath; do rpath="$rpath$dir:" done eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" fi test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" fi shlibpath="$finalize_shlibpath" test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" if test -n "$shlibpath"; then eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" fi # Get the real and link names of the library. eval shared_ext=\"$shrext_cmds\" eval library_names=\"$library_names_spec\" set dummy $library_names shift realname="$1" shift if test -n "$soname_spec"; then eval soname=\"$soname_spec\" else soname="$realname" fi if test -z "$dlname"; then dlname=$soname fi lib="$output_objdir/$realname" linknames= for link do linknames="$linknames $link" done # Use standard objects if they are pic test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` test "X$libobjs" = "X " && libobjs= delfiles= if test -n "$export_symbols" && test -n "$include_expsyms"; then $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" export_symbols="$output_objdir/$libname.uexp" delfiles="$delfiles $export_symbols" fi orig_export_symbols= case $host_os in cygwin* | mingw* | cegcc*) if test -n "$export_symbols" && test -z "$export_symbols_regex"; then # exporting using user supplied symfile if test "x`$SED 1q $export_symbols`" != xEXPORTS; then # and it's NOT already a .def file. Must figure out # which of the given symbols are data symbols and tag # them as such. So, trigger use of export_symbols_cmds. # export_symbols gets reassigned inside the "prepare # the list of exported symbols" if statement, so the # include_expsyms logic still works. orig_export_symbols="$export_symbols" export_symbols= always_export_symbols=yes fi fi ;; esac # Prepare the list of exported symbols if test -z "$export_symbols"; then if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then func_verbose "generating symbol list for \`$libname.la'" export_symbols="$output_objdir/$libname.exp" $opt_dry_run || $RM $export_symbols cmds=$export_symbols_cmds save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" eval cmd=\"$cmd\" func_len " $cmd" len=$func_len_result if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then func_show_eval "$cmd" 'exit $?' skipped_export=false else # The command line is too long to execute in one step. func_verbose "using reloadable object file for export list..." skipped_export=: # Break out early, otherwise skipped_export may be # set to false by a later but shorter cmd. break fi done IFS="$save_ifs" if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' func_show_eval '$MV "${export_symbols}T" "$export_symbols"' fi fi fi if test -n "$export_symbols" && test -n "$include_expsyms"; then tmp_export_symbols="$export_symbols" test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"' fi if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then # The given exports_symbols file has to be filtered, so filter it. func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" # FIXME: $output_objdir/$libname.filter potentially contains lots of # 's' commands which not all seds can handle. GNU sed should be fine # though. Also, the filter scales superlinearly with the number of # global variables. join(1) would be nice here, but unfortunately # isn't a blessed tool. $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" export_symbols=$output_objdir/$libname.def $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols fi tmp_deplibs= for test_deplib in $deplibs; do case " $convenience " in *" $test_deplib "*) ;; *) tmp_deplibs="$tmp_deplibs $test_deplib" ;; esac done deplibs="$tmp_deplibs" if test -n "$convenience"; then if test -n "$whole_archive_flag_spec" && test "$compiler_needs_object" = yes && test -z "$libobjs"; then # extract the archives, so we have objects to list. # TODO: could optimize this to just extract one archive. whole_archive_flag_spec= fi if test -n "$whole_archive_flag_spec"; then save_libobjs=$libobjs eval libobjs=\"\$libobjs $whole_archive_flag_spec\" test "X$libobjs" = "X " && libobjs= else gentop="$output_objdir/${outputname}x" generated="$generated $gentop" func_extract_archives $gentop $convenience libobjs="$libobjs $func_extract_archives_result" test "X$libobjs" = "X " && libobjs= fi fi if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then eval flag=\"$thread_safe_flag_spec\" linker_flags="$linker_flags $flag" fi # Make a backup of the uninstalled library when relinking if test "$mode" = relink; then $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? fi # Do each of the archive commands. if test "$module" = yes && test -n "$module_cmds" ; then if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then eval test_cmds=\"$module_expsym_cmds\" cmds=$module_expsym_cmds else eval test_cmds=\"$module_cmds\" cmds=$module_cmds fi else if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then eval test_cmds=\"$archive_expsym_cmds\" cmds=$archive_expsym_cmds else eval test_cmds=\"$archive_cmds\" cmds=$archive_cmds fi fi if test "X$skipped_export" != "X:" && func_len " $test_cmds" && len=$func_len_result && test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then : else # The command line is too long to link in one step, link piecewise # or, if using GNU ld and skipped_export is not :, use a linker # script. # Save the value of $output and $libobjs because we want to # use them later. If we have whole_archive_flag_spec, we # want to use save_libobjs as it was before # whole_archive_flag_spec was expanded, because we can't # assume the linker understands whole_archive_flag_spec. # This may have to be revisited, in case too many # convenience libraries get linked in and end up exceeding # the spec. if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then save_libobjs=$libobjs fi save_output=$output output_la=`$ECHO "X$output" | $Xsed -e "$basename"` # Clear the reloadable object creation command queue and # initialize k to one. test_cmds= concat_cmds= objlist= last_robj= k=1 if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then output=${output_objdir}/${output_la}.lnkscript func_verbose "creating GNU ld script: $output" $ECHO 'INPUT (' > $output for obj in $save_libobjs do $ECHO "$obj" >> $output done $ECHO ')' >> $output delfiles="$delfiles $output" elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then output=${output_objdir}/${output_la}.lnk func_verbose "creating linker input file list: $output" : > $output set x $save_libobjs shift firstobj= if test "$compiler_needs_object" = yes; then firstobj="$1 " shift fi for obj do $ECHO "$obj" >> $output done delfiles="$delfiles $output" output=$firstobj\"$file_list_spec$output\" else if test -n "$save_libobjs"; then func_verbose "creating reloadable object files..." output=$output_objdir/$output_la-${k}.$objext eval test_cmds=\"$reload_cmds\" func_len " $test_cmds" len0=$func_len_result len=$len0 # Loop over the list of objects to be linked. for obj in $save_libobjs do func_len " $obj" func_arith $len + $func_len_result len=$func_arith_result if test "X$objlist" = X || test "$len" -lt "$max_cmd_len"; then func_append objlist " $obj" else # The command $test_cmds is almost too long, add a # command to the queue. if test "$k" -eq 1 ; then # The first file doesn't have a previous command to add. eval concat_cmds=\"$reload_cmds $objlist $last_robj\" else # All subsequent reloadable object files will link in # the last one created. eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj~\$RM $last_robj\" fi last_robj=$output_objdir/$output_la-${k}.$objext func_arith $k + 1 k=$func_arith_result output=$output_objdir/$output_la-${k}.$objext objlist=$obj func_len " $last_robj" func_arith $len0 + $func_len_result len=$func_arith_result fi done # Handle the remaining objects by creating one last # reloadable object file. All subsequent reloadable object # files will link in the last one created. test -z "$concat_cmds" || concat_cmds=$concat_cmds~ eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" if test -n "$last_robj"; then eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\" fi delfiles="$delfiles $output" else output= fi if ${skipped_export-false}; then func_verbose "generating symbol list for \`$libname.la'" export_symbols="$output_objdir/$libname.exp" $opt_dry_run || $RM $export_symbols libobjs=$output # Append the command to create the export file. test -z "$concat_cmds" || concat_cmds=$concat_cmds~ eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\" if test -n "$last_robj"; then eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" fi fi test -n "$save_libobjs" && func_verbose "creating a temporary reloadable object file: $output" # Loop through the commands generated above and execute them. save_ifs="$IFS"; IFS='~' for cmd in $concat_cmds; do IFS="$save_ifs" $opt_silent || { func_quote_for_expand "$cmd" eval "func_echo $func_quote_for_expand_result" } $opt_dry_run || eval "$cmd" || { lt_exit=$? # Restore the uninstalled library and exit if test "$mode" = relink; then ( cd "$output_objdir" && \ $RM "${realname}T" && \ $MV "${realname}U" "$realname" ) fi exit $lt_exit } done IFS="$save_ifs" if test -n "$export_symbols_regex" && ${skipped_export-false}; then func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' func_show_eval '$MV "${export_symbols}T" "$export_symbols"' fi fi if ${skipped_export-false}; then if test -n "$export_symbols" && test -n "$include_expsyms"; then tmp_export_symbols="$export_symbols" test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"' fi if test -n "$orig_export_symbols"; then # The given exports_symbols file has to be filtered, so filter it. func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" # FIXME: $output_objdir/$libname.filter potentially contains lots of # 's' commands which not all seds can handle. GNU sed should be fine # though. Also, the filter scales superlinearly with the number of # global variables. join(1) would be nice here, but unfortunately # isn't a blessed tool. $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" export_symbols=$output_objdir/$libname.def $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols fi fi libobjs=$output # Restore the value of output. output=$save_output if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then eval libobjs=\"\$libobjs $whole_archive_flag_spec\" test "X$libobjs" = "X " && libobjs= fi # Expand the library linking commands again to reset the # value of $libobjs for piecewise linking. # Do each of the archive commands. if test "$module" = yes && test -n "$module_cmds" ; then if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then cmds=$module_expsym_cmds else cmds=$module_cmds fi else if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then cmds=$archive_expsym_cmds else cmds=$archive_cmds fi fi fi if test -n "$delfiles"; then # Append the command to remove temporary files to $cmds. eval cmds=\"\$cmds~\$RM $delfiles\" fi # Add any objects from preloaded convenience libraries if test -n "$dlprefiles"; then gentop="$output_objdir/${outputname}x" generated="$generated $gentop" func_extract_archives $gentop $dlprefiles libobjs="$libobjs $func_extract_archives_result" test "X$libobjs" = "X " && libobjs= fi save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" eval cmd=\"$cmd\" $opt_silent || { func_quote_for_expand "$cmd" eval "func_echo $func_quote_for_expand_result" } $opt_dry_run || eval "$cmd" || { lt_exit=$? # Restore the uninstalled library and exit if test "$mode" = relink; then ( cd "$output_objdir" && \ $RM "${realname}T" && \ $MV "${realname}U" "$realname" ) fi exit $lt_exit } done IFS="$save_ifs" # Restore the uninstalled library and exit if test "$mode" = relink; then $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? if test -n "$convenience"; then if test -z "$whole_archive_flag_spec"; then func_show_eval '${RM}r "$gentop"' fi fi exit $EXIT_SUCCESS fi # Create links to the real library. for linkname in $linknames; do if test "$realname" != "$linkname"; then func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?' fi done # If -module or -export-dynamic was specified, set the dlname. if test "$module" = yes || test "$export_dynamic" = yes; then # On all known operating systems, these are identical. dlname="$soname" fi fi ;; obj) if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then func_warning "\`-dlopen' is ignored for objects" fi case " $deplibs" in *\ -l* | *\ -L*) func_warning "\`-l' and \`-L' are ignored for objects" ;; esac test -n "$rpath" && \ func_warning "\`-rpath' is ignored for objects" test -n "$xrpath" && \ func_warning "\`-R' is ignored for objects" test -n "$vinfo" && \ func_warning "\`-version-info' is ignored for objects" test -n "$release" && \ func_warning "\`-release' is ignored for objects" case $output in *.lo) test -n "$objs$old_deplibs" && \ func_fatal_error "cannot build library object \`$output' from non-libtool objects" libobj=$output func_lo2o "$libobj" obj=$func_lo2o_result ;; *) libobj= obj="$output" ;; esac # Delete the old objects. $opt_dry_run || $RM $obj $libobj # Objects from convenience libraries. This assumes # single-version convenience libraries. Whenever we create # different ones for PIC/non-PIC, this we'll have to duplicate # the extraction. reload_conv_objs= gentop= # reload_cmds runs $LD directly, so let us get rid of # -Wl from whole_archive_flag_spec and hope we can get by with # turning comma into space.. wl= if test -n "$convenience"; then if test -n "$whole_archive_flag_spec"; then eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'` else gentop="$output_objdir/${obj}x" generated="$generated $gentop" func_extract_archives $gentop $convenience reload_conv_objs="$reload_objs $func_extract_archives_result" fi fi # Create the old-style object. reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test output="$obj" func_execute_cmds "$reload_cmds" 'exit $?' # Exit if we aren't doing a library object file. if test -z "$libobj"; then if test -n "$gentop"; then func_show_eval '${RM}r "$gentop"' fi exit $EXIT_SUCCESS fi if test "$build_libtool_libs" != yes; then if test -n "$gentop"; then func_show_eval '${RM}r "$gentop"' fi # Create an invalid libtool object if no PIC, so that we don't # accidentally link it into a program. # $show "echo timestamp > $libobj" # $opt_dry_run || eval "echo timestamp > $libobj" || exit $? exit $EXIT_SUCCESS fi if test -n "$pic_flag" || test "$pic_mode" != default; then # Only do commands if we really have different PIC objects. reload_objs="$libobjs $reload_conv_objs" output="$libobj" func_execute_cmds "$reload_cmds" 'exit $?' fi if test -n "$gentop"; then func_show_eval '${RM}r "$gentop"' fi exit $EXIT_SUCCESS ;; prog) case $host in *cygwin*) func_stripname '' '.exe' "$output" output=$func_stripname_result.exe;; esac test -n "$vinfo" && \ func_warning "\`-version-info' is ignored for programs" test -n "$release" && \ func_warning "\`-release' is ignored for programs" test "$preload" = yes \ && test "$dlopen_support" = unknown \ && test "$dlopen_self" = unknown \ && test "$dlopen_self_static" = unknown && \ func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support." case $host in *-*-rhapsody* | *-*-darwin1.[012]) # On Rhapsody replace the C library is the System framework compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'` finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'` ;; esac case $host in *-*-darwin*) # Don't allow lazy linking, it breaks C++ global constructors # But is supposedly fixed on 10.4 or later (yay!). if test "$tagname" = CXX ; then case ${MACOSX_DEPLOYMENT_TARGET-10.0} in 10.[0123]) compile_command="$compile_command ${wl}-bind_at_load" finalize_command="$finalize_command ${wl}-bind_at_load" ;; esac fi # Time to change all our "foo.ltframework" stuff back to "-framework foo" compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` ;; esac # move library search paths that coincide with paths to not yet # installed libraries to the beginning of the library search list new_libs= for path in $notinst_path; do case " $new_libs " in *" -L$path/$objdir "*) ;; *) case " $compile_deplibs " in *" -L$path/$objdir "*) new_libs="$new_libs -L$path/$objdir" ;; esac ;; esac done for deplib in $compile_deplibs; do case $deplib in -L*) case " $new_libs " in *" $deplib "*) ;; *) new_libs="$new_libs $deplib" ;; esac ;; *) new_libs="$new_libs $deplib" ;; esac done compile_deplibs="$new_libs" compile_command="$compile_command $compile_deplibs" finalize_command="$finalize_command $finalize_deplibs" if test -n "$rpath$xrpath"; then # If the user specified any rpath flags, then add them. for libdir in $rpath $xrpath; do # This is the magic to use -rpath. case "$finalize_rpath " in *" $libdir "*) ;; *) finalize_rpath="$finalize_rpath $libdir" ;; esac done fi # Now hardcode the library paths rpath= hardcode_libdirs= for libdir in $compile_rpath $finalize_rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then if test -z "$hardcode_libdirs"; then hardcode_libdirs="$libdir" else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" rpath="$rpath $flag" fi elif test -n "$runpath_var"; then case "$perm_rpath " in *" $libdir "*) ;; *) perm_rpath="$perm_rpath $libdir" ;; esac fi case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'` case :$dllsearchpath: in *":$libdir:"*) ;; ::) dllsearchpath=$libdir;; *) dllsearchpath="$dllsearchpath:$libdir";; esac case :$dllsearchpath: in *":$testbindir:"*) ;; ::) dllsearchpath=$testbindir;; *) dllsearchpath="$dllsearchpath:$testbindir";; esac ;; esac done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" eval rpath=\" $hardcode_libdir_flag_spec\" fi compile_rpath="$rpath" rpath= hardcode_libdirs= for libdir in $finalize_rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then if test -z "$hardcode_libdirs"; then hardcode_libdirs="$libdir" else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" rpath="$rpath $flag" fi elif test -n "$runpath_var"; then case "$finalize_perm_rpath " in *" $libdir "*) ;; *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; esac fi done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" eval rpath=\" $hardcode_libdir_flag_spec\" fi finalize_rpath="$rpath" if test -n "$libobjs" && test "$build_old_libs" = yes; then # Transform all the library objects into standard objects. compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` fi func_generate_dlsyms "$outputname" "@PROGRAM@" "no" # template prelinking step if test -n "$prelink_cmds"; then func_execute_cmds "$prelink_cmds" 'exit $?' fi wrappers_required=yes case $host in *cygwin* | *mingw* ) if test "$build_libtool_libs" != yes; then wrappers_required=no fi ;; *cegcc) # Disable wrappers for cegcc, we are cross compiling anyway. wrappers_required=no ;; *) if test "$need_relink" = no || test "$build_libtool_libs" != yes; then wrappers_required=no fi ;; esac if test "$wrappers_required" = no; then # Replace the output file specification. compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` link_command="$compile_command$compile_rpath" # We have no uninstalled library dependencies, so finalize right now. exit_status=0 func_show_eval "$link_command" 'exit_status=$?' # Delete the generated files. if test -f "$output_objdir/${outputname}S.${objext}"; then func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"' fi exit $exit_status fi if test -n "$compile_shlibpath$finalize_shlibpath"; then compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" fi if test -n "$finalize_shlibpath"; then finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" fi compile_var= finalize_var= if test -n "$runpath_var"; then if test -n "$perm_rpath"; then # We should set the runpath_var. rpath= for dir in $perm_rpath; do rpath="$rpath$dir:" done compile_var="$runpath_var=\"$rpath\$$runpath_var\" " fi if test -n "$finalize_perm_rpath"; then # We should set the runpath_var. rpath= for dir in $finalize_perm_rpath; do rpath="$rpath$dir:" done finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " fi fi if test "$no_install" = yes; then # We don't need to create a wrapper script. link_command="$compile_var$compile_command$compile_rpath" # Replace the output file specification. link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` # Delete the old output file. $opt_dry_run || $RM $output # Link the executable and exit func_show_eval "$link_command" 'exit $?' exit $EXIT_SUCCESS fi if test "$hardcode_action" = relink; then # Fast installation is not supported link_command="$compile_var$compile_command$compile_rpath" relink_command="$finalize_var$finalize_command$finalize_rpath" func_warning "this platform does not like uninstalled shared libraries" func_warning "\`$output' will be relinked during installation" else if test "$fast_install" != no; then link_command="$finalize_var$compile_command$finalize_rpath" if test "$fast_install" = yes; then relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` else # fast_install is set to needless relink_command= fi else link_command="$compile_var$compile_command$compile_rpath" relink_command="$finalize_var$finalize_command$finalize_rpath" fi fi # Replace the output file specification. link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` # Delete the old output files. $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname func_show_eval "$link_command" 'exit $?' # Now create the wrapper script. func_verbose "creating $output" # Quote the relink command for shipping. if test -n "$relink_command"; then # Preserve any variables that may affect compiler behavior for var in $variables_saved_for_relink; do if eval test -z \"\${$var+set}\"; then relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" elif eval var_value=\$$var; test -z "$var_value"; then relink_command="$var=; export $var; $relink_command" else func_quote_for_eval "$var_value" relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" fi done relink_command="(cd `pwd`; $relink_command)" relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"` fi # Quote $ECHO for shipping. if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then case $progpath in [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";; *) qecho="$SHELL `pwd`/$progpath --fallback-echo";; esac qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"` else qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"` fi # Only actually do things if not in dry run mode. $opt_dry_run || { # win32 will think the script is a binary if it has # a .exe suffix, so we strip it off here. case $output in *.exe) func_stripname '' '.exe' "$output" output=$func_stripname_result ;; esac # test for cygwin because mv fails w/o .exe extensions case $host in *cygwin*) exeext=.exe func_stripname '' '.exe' "$outputname" outputname=$func_stripname_result ;; *) exeext= ;; esac case $host in *cygwin* | *mingw* ) func_dirname_and_basename "$output" "" "." output_name=$func_basename_result output_path=$func_dirname_result cwrappersource="$output_path/$objdir/lt-$output_name.c" cwrapper="$output_path/$output_name.exe" $RM $cwrappersource $cwrapper trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 func_emit_cwrapperexe_src > $cwrappersource # The wrapper executable is built using the $host compiler, # because it contains $host paths and files. If cross- # compiling, it, like the target executable, must be # executed on the $host or under an emulation environment. $opt_dry_run || { $LTCC $LTCFLAGS -o $cwrapper $cwrappersource $STRIP $cwrapper } # Now, create the wrapper script for func_source use: func_ltwrapper_scriptname $cwrapper $RM $func_ltwrapper_scriptname_result trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15 $opt_dry_run || { # note: this script will not be executed, so do not chmod. if test "x$build" = "x$host" ; then $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result else func_emit_wrapper no > $func_ltwrapper_scriptname_result fi } ;; * ) $RM $output trap "$RM $output; exit $EXIT_FAILURE" 1 2 15 func_emit_wrapper no > $output chmod +x $output ;; esac } exit $EXIT_SUCCESS ;; esac # See if we need to build an old-fashioned archive. for oldlib in $oldlibs; do if test "$build_libtool_libs" = convenience; then oldobjs="$libobjs_save $symfileobj" addlibs="$convenience" build_libtool_libs=no else if test "$build_libtool_libs" = module; then oldobjs="$libobjs_save" build_libtool_libs=no else oldobjs="$old_deplibs $non_pic_objects" if test "$preload" = yes && test -f "$symfileobj"; then oldobjs="$oldobjs $symfileobj" fi fi addlibs="$old_convenience" fi if test -n "$addlibs"; then gentop="$output_objdir/${outputname}x" generated="$generated $gentop" func_extract_archives $gentop $addlibs oldobjs="$oldobjs $func_extract_archives_result" fi # Do each command in the archive commands. if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then cmds=$old_archive_from_new_cmds else # Add any objects from preloaded convenience libraries if test -n "$dlprefiles"; then gentop="$output_objdir/${outputname}x" generated="$generated $gentop" func_extract_archives $gentop $dlprefiles oldobjs="$oldobjs $func_extract_archives_result" fi # POSIX demands no paths to be encoded in archives. We have # to avoid creating archives with duplicate basenames if we # might have to extract them afterwards, e.g., when creating a # static archive out of a convenience library, or when linking # the entirety of a libtool archive into another (currently # not supported by libtool). if (for obj in $oldobjs do func_basename "$obj" $ECHO "$func_basename_result" done | sort | sort -uc >/dev/null 2>&1); then : else $ECHO "copying selected object files to avoid basename conflicts..." gentop="$output_objdir/${outputname}x" generated="$generated $gentop" func_mkdir_p "$gentop" save_oldobjs=$oldobjs oldobjs= counter=1 for obj in $save_oldobjs do func_basename "$obj" objbase="$func_basename_result" case " $oldobjs " in " ") oldobjs=$obj ;; *[\ /]"$objbase "*) while :; do # Make sure we don't pick an alternate name that also # overlaps. newobj=lt$counter-$objbase func_arith $counter + 1 counter=$func_arith_result case " $oldobjs " in *[\ /]"$newobj "*) ;; *) if test ! -f "$gentop/$newobj"; then break; fi ;; esac done func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" oldobjs="$oldobjs $gentop/$newobj" ;; *) oldobjs="$oldobjs $obj" ;; esac done fi eval cmds=\"$old_archive_cmds\" func_len " $cmds" len=$func_len_result if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then cmds=$old_archive_cmds else # the command line is too long to link in one step, link in parts func_verbose "using piecewise archive linking..." save_RANLIB=$RANLIB RANLIB=: objlist= concat_cmds= save_oldobjs=$oldobjs oldobjs= # Is there a better way of finding the last object in the list? for obj in $save_oldobjs do last_oldobj=$obj done eval test_cmds=\"$old_archive_cmds\" func_len " $test_cmds" len0=$func_len_result len=$len0 for obj in $save_oldobjs do func_len " $obj" func_arith $len + $func_len_result len=$func_arith_result func_append objlist " $obj" if test "$len" -lt "$max_cmd_len"; then : else # the above command should be used before it gets too long oldobjs=$objlist if test "$obj" = "$last_oldobj" ; then RANLIB=$save_RANLIB fi test -z "$concat_cmds" || concat_cmds=$concat_cmds~ eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" objlist= len=$len0 fi done RANLIB=$save_RANLIB oldobjs=$objlist if test "X$oldobjs" = "X" ; then eval cmds=\"\$concat_cmds\" else eval cmds=\"\$concat_cmds~\$old_archive_cmds\" fi fi fi func_execute_cmds "$cmds" 'exit $?' done test -n "$generated" && \ func_show_eval "${RM}r$generated" # Now create the libtool archive. case $output in *.la) old_library= test "$build_old_libs" = yes && old_library="$libname.$libext" func_verbose "creating $output" # Preserve any variables that may affect compiler behavior for var in $variables_saved_for_relink; do if eval test -z \"\${$var+set}\"; then relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" elif eval var_value=\$$var; test -z "$var_value"; then relink_command="$var=; export $var; $relink_command" else func_quote_for_eval "$var_value" relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" fi done # Quote the link command for shipping. relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"` if test "$hardcode_automatic" = yes ; then relink_command= fi # Only create the output if not a dry run. $opt_dry_run || { for installed in no yes; do if test "$installed" = yes; then if test -z "$install_libdir"; then break fi output="$output_objdir/$outputname"i # Replace all uninstalled libtool libraries with the installed ones newdependency_libs= for deplib in $dependency_libs; do case $deplib in *.la) func_basename "$deplib" name="$func_basename_result" eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` test -z "$libdir" && \ func_fatal_error "\`$deplib' is not a valid libtool archive" newdependency_libs="$newdependency_libs $libdir/$name" ;; *) newdependency_libs="$newdependency_libs $deplib" ;; esac done dependency_libs="$newdependency_libs" newdlfiles= for lib in $dlfiles; do case $lib in *.la) func_basename "$lib" name="$func_basename_result" eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` test -z "$libdir" && \ func_fatal_error "\`$lib' is not a valid libtool archive" newdlfiles="$newdlfiles $libdir/$name" ;; *) newdlfiles="$newdlfiles $lib" ;; esac done dlfiles="$newdlfiles" newdlprefiles= for lib in $dlprefiles; do case $lib in *.la) # Only pass preopened files to the pseudo-archive (for # eventual linking with the app. that links it) if we # didn't already link the preopened objects directly into # the library: func_basename "$lib" name="$func_basename_result" eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` test -z "$libdir" && \ func_fatal_error "\`$lib' is not a valid libtool archive" newdlprefiles="$newdlprefiles $libdir/$name" ;; esac done dlprefiles="$newdlprefiles" else newdlfiles= for lib in $dlfiles; do case $lib in [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; *) abs=`pwd`"/$lib" ;; esac newdlfiles="$newdlfiles $abs" done dlfiles="$newdlfiles" newdlprefiles= for lib in $dlprefiles; do case $lib in [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; *) abs=`pwd`"/$lib" ;; esac newdlprefiles="$newdlprefiles $abs" done dlprefiles="$newdlprefiles" fi $RM $output # place dlname in correct position for cygwin tdlname=$dlname case $host,$output,$installed,$module,$dlname in *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; esac $ECHO > $output "\ # $outputname - a libtool library file # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION # # Please DO NOT delete this file! # It is necessary for linking the library. # The name that we can dlopen(3). dlname='$tdlname' # Names of this library. library_names='$library_names' # The name of the static archive. old_library='$old_library' # Linker flags that can not go in dependency_libs. inherited_linker_flags='$new_inherited_linker_flags' # Libraries that this one depends upon. dependency_libs='$dependency_libs' # Names of additional weak libraries provided by this library weak_library_names='$weak_libs' # Version information for $libname. current=$current age=$age revision=$revision # Is this an already installed library? installed=$installed # Should we warn about portability when linking against -modules? shouldnotlink=$module # Files to dlopen/dlpreopen dlopen='$dlfiles' dlpreopen='$dlprefiles' # Directory that this library needs to be installed in: libdir='$install_libdir'" if test "$installed" = no && test "$need_relink" = yes; then $ECHO >> $output "\ relink_command=\"$relink_command\"" fi done } # Do a symbolic link so that the libtool archive can be found in # LD_LIBRARY_PATH before the program is installed. func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?' ;; esac exit $EXIT_SUCCESS } { test "$mode" = link || test "$mode" = relink; } && func_mode_link ${1+"$@"} # func_mode_uninstall arg... func_mode_uninstall () { $opt_debug RM="$nonopt" files= rmforce= exit_status=0 # This variable tells wrapper scripts just to set variables rather # than running their programs. libtool_install_magic="$magic" for arg do case $arg in -f) RM="$RM $arg"; rmforce=yes ;; -*) RM="$RM $arg" ;; *) files="$files $arg" ;; esac done test -z "$RM" && \ func_fatal_help "you must specify an RM program" rmdirs= origobjdir="$objdir" for file in $files; do func_dirname "$file" "" "." dir="$func_dirname_result" if test "X$dir" = X.; then objdir="$origobjdir" else objdir="$dir/$origobjdir" fi func_basename "$file" name="$func_basename_result" test "$mode" = uninstall && objdir="$dir" # Remember objdir for removal later, being careful to avoid duplicates if test "$mode" = clean; then case " $rmdirs " in *" $objdir "*) ;; *) rmdirs="$rmdirs $objdir" ;; esac fi # Don't error if the file doesn't exist and rm -f was used. if { test -L "$file"; } >/dev/null 2>&1 || { test -h "$file"; } >/dev/null 2>&1 || test -f "$file"; then : elif test -d "$file"; then exit_status=1 continue elif test "$rmforce" = yes; then continue fi rmfiles="$file" case $name in *.la) # Possibly a libtool archive, so verify it. if func_lalib_p "$file"; then func_source $dir/$name # Delete the libtool libraries and symlinks. for n in $library_names; do rmfiles="$rmfiles $objdir/$n" done test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library" case "$mode" in clean) case " $library_names " in # " " in the beginning catches empty $dlname *" $dlname "*) ;; *) rmfiles="$rmfiles $objdir/$dlname" ;; esac test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" ;; uninstall) if test -n "$library_names"; then # Do each command in the postuninstall commands. func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' fi if test -n "$old_library"; then # Do each command in the old_postuninstall commands. func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' fi # FIXME: should reinstall the best remaining shared library. ;; esac fi ;; *.lo) # Possibly a libtool object, so verify it. if func_lalib_p "$file"; then # Read the .lo file func_source $dir/$name # Add PIC object to the list of files to remove. if test -n "$pic_object" && test "$pic_object" != none; then rmfiles="$rmfiles $dir/$pic_object" fi # Add non-PIC object to the list of files to remove. if test -n "$non_pic_object" && test "$non_pic_object" != none; then rmfiles="$rmfiles $dir/$non_pic_object" fi fi ;; *) if test "$mode" = clean ; then noexename=$name case $file in *.exe) func_stripname '' '.exe' "$file" file=$func_stripname_result func_stripname '' '.exe' "$name" noexename=$func_stripname_result # $file with .exe has already been added to rmfiles, # add $file without .exe rmfiles="$rmfiles $file" ;; esac # Do a test to see if this is a libtool program. if func_ltwrapper_p "$file"; then if func_ltwrapper_executable_p "$file"; then func_ltwrapper_scriptname "$file" relink_command= func_source $func_ltwrapper_scriptname_result rmfiles="$rmfiles $func_ltwrapper_scriptname_result" else relink_command= func_source $dir/$noexename fi # note $name still contains .exe if it was in $file originally # as does the version of $file that was added into $rmfiles rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}" if test "$fast_install" = yes && test -n "$relink_command"; then rmfiles="$rmfiles $objdir/lt-$name" fi if test "X$noexename" != "X$name" ; then rmfiles="$rmfiles $objdir/lt-${noexename}.c" fi fi fi ;; esac func_show_eval "$RM $rmfiles" 'exit_status=1' done objdir="$origobjdir" # Try to remove the ${objdir}s in the directories where we deleted files for dir in $rmdirs; do if test -d "$dir"; then func_show_eval "rmdir $dir >/dev/null 2>&1" fi done exit $exit_status } { test "$mode" = uninstall || test "$mode" = clean; } && func_mode_uninstall ${1+"$@"} test -z "$mode" && { help="$generic_help" func_fatal_help "you must specify a MODE" } test -z "$exec_cmd" && \ func_fatal_help "invalid operation mode \`$mode'" if test -n "$exec_cmd"; then eval exec "$exec_cmd" exit $EXIT_FAILURE fi exit $exit_status # The TAGs below are defined such that we never get into a situation # in which we disable both kinds of libraries. Given conflicting # choices, we go for a static library, that is the most portable, # since we can't tell whether shared libraries were disabled because # the user asked for that or because the platform doesn't support # them. This is particularly important on AIX, because we don't # support having both static and shared libraries enabled at the same # time on that platform, so we default to a shared-only configuration. # If a disable-shared tag is given, we'll fallback to a static-only # configuration. But we'll never go from static-only to shared-only. # ### BEGIN LIBTOOL TAG CONFIG: disable-shared build_libtool_libs=no build_old_libs=yes # ### END LIBTOOL TAG CONFIG: disable-shared # ### BEGIN LIBTOOL TAG CONFIG: disable-static build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` # ### END LIBTOOL TAG CONFIG: disable-static # Local Variables: # mode:shell-script # sh-indentation:2 # End: # vi:sw=2 netspeed_applet-0.16/icons/0000755000175000017500000000000011402462052012724 500000000000000netspeed_applet-0.16/icons/32x32/0000755000175000017500000000000011402462061013505 500000000000000netspeed_applet-0.16/icons/32x32/Makefile.am0000644000175000017500000000002011402426203015447 00000000000000SUBDIRS = apps netspeed_applet-0.16/icons/32x32/Makefile.in0000644000175000017500000004265711402461243015511 00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = icons/32x32 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-dvi-recursive install-exec-recursive \ install-html-recursive install-info-recursive \ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ distdir ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" ACLOCAL = @ACLOCAL@ ALL_LINGUAS = @ALL_LINGUAS@ AMTAR = @AMTAR@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CATALOGS = @CATALOGS@ CATOBJEXT = @CATOBJEXT@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ DOC_USER_FORMATS = @DOC_USER_FORMATS@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GMOFILES = @GMOFILES@ GMSGFMT = @GMSGFMT@ GREP = @GREP@ HELP_DIR = @HELP_DIR@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTOBJEXT = @INSTOBJEXT@ INTLLIBS = @INTLLIBS@ INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ INTLTOOL_MERGE = @INTLTOOL_MERGE@ INTLTOOL_PERL = @INTLTOOL_PERL@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ IWLIB = @IWLIB@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ MKINSTALLDIRS = @MKINSTALLDIRS@ MSGFMT = @MSGFMT@ MSGFMT_OPTS = @MSGFMT_OPTS@ MSGMERGE = @MSGMERGE@ NETSPEED_APPLET_CFLAGS = @NETSPEED_APPLET_CFLAGS@ NETSPEED_APPLET_LIBS = @NETSPEED_APPLET_LIBS@ NETSPEED_CFLAGS = @NETSPEED_CFLAGS@ NETSPEED_LIBS = @NETSPEED_LIBS@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OMF_DIR = @OMF_DIR@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ POFILES = @POFILES@ POSUB = @POSUB@ PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ XGETTEXT = @XGETTEXT@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ SUBDIRS = apps all: all-recursive .SUFFIXES: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu icons/32x32/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu icons/32x32/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" $(RECURSIVE_CLEAN_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done check-am: all-am check: check-recursive all-am: Makefile installdirs: installdirs-recursive installdirs-am: install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-recursive -rm -f Makefile distclean-am: clean-am distclean-generic distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ install-am install-strip tags-recursive .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ all all-am check check-am clean clean-generic clean-libtool \ ctags ctags-recursive distclean distclean-generic \ distclean-libtool distclean-tags distdir dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-dvi install-dvi-am install-exec \ install-exec-am install-html install-html-am install-info \ install-info-am install-man install-pdf install-pdf-am \ install-ps install-ps-am install-strip installcheck \ installcheck-am installdirs installdirs-am maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-generic \ mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ uninstall uninstall-am # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: netspeed_applet-0.16/icons/32x32/apps/0000755000175000017500000000000011402462061014450 500000000000000netspeed_applet-0.16/icons/32x32/apps/netspeed-applet.png0000644000175000017500000000370211402426203020170 00000000000000PNG  IHDR szzsBIT|d pHYs B(xtEXtSoftwarewww.inkscape.org<?IDATX{lSǿܧ<:#4V&m6uB+TH6:4itTBuڱ2uci*"B4 ع^{=LLHe{>=}I4tzuVB/8bۄJi|toܸQw[7HeeZSql~itvv*e冬2vzJ!IR ιN ^q΋Je ly?PU Ϯ4@K;]=*8 8PLwqG "Is!X^/ So ddkG@@ B(Ǐ7F&XJhnOUF@N r2 āˁѴ5)C(4tf #v2|*Hdd]$ #k [u] ڮ~۶nȘ33= `Q/ WWTdշpiDjFn9yv)<dEQ5k>԰+M8EXiŕ2xѮ9>HGQ>E}.Mͫ /n(GN\d3g10ka#2:Y@)!"-yqMOXE׮{\%㧖f#LP̾=>`1 e2У r]Q1eDYURy@Z"Ē؋xP3K>M&~]ˮ~ZẹB7|?e%2RUaI, u^Vd,:+vLvZB}cڰ @]1h'\oNM{h|G5l lw Vuҙ_ | akIENDB`netspeed_applet-0.16/icons/32x32/apps/Makefile.am0000644000175000017500000000026011402426203016420 00000000000000themedir = $(datadir)/icons/hicolor size = 32x32 context = apps iconsdir = $(themedir)/$(size)/$(context) icons_DATA = \ netspeed-applet.png EXTRA_DIST = \ $(icons_DATA) netspeed_applet-0.16/icons/32x32/apps/Makefile.in0000644000175000017500000003067611402461244016453 00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = icons/32x32/apps DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = SOURCES = DIST_SOURCES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__installdirs = "$(DESTDIR)$(iconsdir)" DATA = $(icons_DATA) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ ALL_LINGUAS = @ALL_LINGUAS@ AMTAR = @AMTAR@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CATALOGS = @CATALOGS@ CATOBJEXT = @CATOBJEXT@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ DOC_USER_FORMATS = @DOC_USER_FORMATS@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GMOFILES = @GMOFILES@ GMSGFMT = @GMSGFMT@ GREP = @GREP@ HELP_DIR = @HELP_DIR@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTOBJEXT = @INSTOBJEXT@ INTLLIBS = @INTLLIBS@ INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ INTLTOOL_MERGE = @INTLTOOL_MERGE@ INTLTOOL_PERL = @INTLTOOL_PERL@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ IWLIB = @IWLIB@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ MKINSTALLDIRS = @MKINSTALLDIRS@ MSGFMT = @MSGFMT@ MSGFMT_OPTS = @MSGFMT_OPTS@ MSGMERGE = @MSGMERGE@ NETSPEED_APPLET_CFLAGS = @NETSPEED_APPLET_CFLAGS@ NETSPEED_APPLET_LIBS = @NETSPEED_APPLET_LIBS@ NETSPEED_CFLAGS = @NETSPEED_CFLAGS@ NETSPEED_LIBS = @NETSPEED_LIBS@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OMF_DIR = @OMF_DIR@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ POFILES = @POFILES@ POSUB = @POSUB@ PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ XGETTEXT = @XGETTEXT@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ themedir = $(datadir)/icons/hicolor size = 32x32 context = apps iconsdir = $(themedir)/$(size)/$(context) icons_DATA = \ netspeed-applet.png EXTRA_DIST = \ $(icons_DATA) all: all-am .SUFFIXES: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu icons/32x32/apps/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu icons/32x32/apps/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs install-iconsDATA: $(icons_DATA) @$(NORMAL_INSTALL) test -z "$(iconsdir)" || $(MKDIR_P) "$(DESTDIR)$(iconsdir)" @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(iconsdir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(iconsdir)" || exit $$?; \ done uninstall-iconsDATA: @$(NORMAL_UNINSTALL) @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ test -n "$$files" || exit 0; \ echo " ( cd '$(DESTDIR)$(iconsdir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(iconsdir)" && rm -f $$files tags: TAGS TAGS: ctags: CTAGS CTAGS: distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(DATA) installdirs: for dir in "$(DESTDIR)$(iconsdir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-iconsDATA install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-iconsDATA .MAKE: install-am install-strip .PHONY: all all-am check check-am clean clean-generic clean-libtool \ distclean distclean-generic distclean-libtool distdir dvi \ dvi-am html html-am info info-am install install-am \ install-data install-data-am install-dvi install-dvi-am \ install-exec install-exec-am install-html install-html-am \ install-iconsDATA install-info install-info-am install-man \ install-pdf install-pdf-am install-ps install-ps-am \ install-strip installcheck installcheck-am installdirs \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ uninstall uninstall-am uninstall-iconsDATA # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: netspeed_applet-0.16/icons/Makefile.am0000644000175000017500000000067511402426203014706 00000000000000SUBDIRS = 16x16 22x22 24x24 32x32 48x48 scalable gtk_update_icon_cache = gtk-update-icon-cache -f -t $(datadir)/icons/hicolor install-data-hook: update-icon-cache uninstall-hook: update-icon-cache update-icon-cache: @-if test -z "$(DESTDIR)"; then \ echo "Updating Gtk icon cache."; \ $(gtk_update_icon_cache); \ else \ echo "*** Icon cache not updated. After (un)install, run this:"; \ echo "*** $(gtk_update_icon_cache)"; \ fi netspeed_applet-0.16/icons/16x16/0000755000175000017500000000000011402462053013512 500000000000000netspeed_applet-0.16/icons/16x16/Makefile.am0000644000175000017500000000003011402426203015454 00000000000000SUBDIRS = apps devices netspeed_applet-0.16/icons/16x16/Makefile.in0000644000175000017500000004266711402461243015516 00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = icons/16x16 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-dvi-recursive install-exec-recursive \ install-html-recursive install-info-recursive \ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ distdir ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" ACLOCAL = @ACLOCAL@ ALL_LINGUAS = @ALL_LINGUAS@ AMTAR = @AMTAR@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CATALOGS = @CATALOGS@ CATOBJEXT = @CATOBJEXT@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ DOC_USER_FORMATS = @DOC_USER_FORMATS@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GMOFILES = @GMOFILES@ GMSGFMT = @GMSGFMT@ GREP = @GREP@ HELP_DIR = @HELP_DIR@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTOBJEXT = @INSTOBJEXT@ INTLLIBS = @INTLLIBS@ INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ INTLTOOL_MERGE = @INTLTOOL_MERGE@ INTLTOOL_PERL = @INTLTOOL_PERL@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ IWLIB = @IWLIB@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ MKINSTALLDIRS = @MKINSTALLDIRS@ MSGFMT = @MSGFMT@ MSGFMT_OPTS = @MSGFMT_OPTS@ MSGMERGE = @MSGMERGE@ NETSPEED_APPLET_CFLAGS = @NETSPEED_APPLET_CFLAGS@ NETSPEED_APPLET_LIBS = @NETSPEED_APPLET_LIBS@ NETSPEED_CFLAGS = @NETSPEED_CFLAGS@ NETSPEED_LIBS = @NETSPEED_LIBS@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OMF_DIR = @OMF_DIR@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ POFILES = @POFILES@ POSUB = @POSUB@ PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ XGETTEXT = @XGETTEXT@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ SUBDIRS = apps devices all: all-recursive .SUFFIXES: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu icons/16x16/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu icons/16x16/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" $(RECURSIVE_CLEAN_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done check-am: all-am check: check-recursive all-am: Makefile installdirs: installdirs-recursive installdirs-am: install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-recursive -rm -f Makefile distclean-am: clean-am distclean-generic distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ install-am install-strip tags-recursive .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ all all-am check check-am clean clean-generic clean-libtool \ ctags ctags-recursive distclean distclean-generic \ distclean-libtool distclean-tags distdir dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-dvi install-dvi-am install-exec \ install-exec-am install-html install-html-am install-info \ install-info-am install-man install-pdf install-pdf-am \ install-ps install-ps-am install-strip installcheck \ installcheck-am installdirs installdirs-am maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-generic \ mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ uninstall uninstall-am # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: netspeed_applet-0.16/icons/16x16/devices/0000755000175000017500000000000011402462054015135 500000000000000netspeed_applet-0.16/icons/16x16/devices/netspeed-ppp.png0000644000175000017500000000111511402426203020161 00000000000000PNG  IHDRabKGDC pHYs  ~tIME )IDATx͓MkQΤ1Ր`"1J FAp-u' ݺ*]WtMvP6`یsufE\x˅CQ@0Eqsv? &57gg_[!!5^Gi]&5, t^wxה1N^͵0_=ppBz{n{=0q@4NDQJMiq{jr?9l @gJ2ʐ| [3fY2]T’b*ɒP zCE|}SK)0"sةS o`DL^L&!*v2hl}AS%5eH /<5Ώvݛ( O=`ńLZ] \ػ>AM(PRn B.' *IENDB`netspeed_applet-0.16/icons/16x16/devices/netspeed-plip.png0000644000175000017500000000052211402426203020327 00000000000000PNG  IHDRabKGD pHYs+tIME #0s0IDAT8˥9 0<,b!x/;=RxB,] ͫ/$7K&K# _jh۶ia,yk yuQUNuTL? T)|jsq ]wŖe!˲ m(q`x&@H N)0%\,B2d3K1o>7 d_VaIENDB`netspeed_applet-0.16/icons/16x16/devices/Makefile.am0000644000175000017500000000033711402426203017110 00000000000000themedir = $(datadir)/icons/hicolor size = 16x16 context = devices iconsdir = $(themedir)/$(size)/$(context) icons_DATA = \ netspeed-loopback.png \ netspeed-plip.png \ netspeed-ppp.png EXTRA_DIST = \ $(icons_DATA) netspeed_applet-0.16/icons/16x16/devices/Makefile.in0000644000175000017500000003076611402461243017135 00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = icons/16x16/devices DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = SOURCES = DIST_SOURCES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__installdirs = "$(DESTDIR)$(iconsdir)" DATA = $(icons_DATA) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ ALL_LINGUAS = @ALL_LINGUAS@ AMTAR = @AMTAR@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CATALOGS = @CATALOGS@ CATOBJEXT = @CATOBJEXT@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ DOC_USER_FORMATS = @DOC_USER_FORMATS@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GMOFILES = @GMOFILES@ GMSGFMT = @GMSGFMT@ GREP = @GREP@ HELP_DIR = @HELP_DIR@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTOBJEXT = @INSTOBJEXT@ INTLLIBS = @INTLLIBS@ INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ INTLTOOL_MERGE = @INTLTOOL_MERGE@ INTLTOOL_PERL = @INTLTOOL_PERL@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ IWLIB = @IWLIB@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ MKINSTALLDIRS = @MKINSTALLDIRS@ MSGFMT = @MSGFMT@ MSGFMT_OPTS = @MSGFMT_OPTS@ MSGMERGE = @MSGMERGE@ NETSPEED_APPLET_CFLAGS = @NETSPEED_APPLET_CFLAGS@ NETSPEED_APPLET_LIBS = @NETSPEED_APPLET_LIBS@ NETSPEED_CFLAGS = @NETSPEED_CFLAGS@ NETSPEED_LIBS = @NETSPEED_LIBS@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OMF_DIR = @OMF_DIR@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ POFILES = @POFILES@ POSUB = @POSUB@ PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ XGETTEXT = @XGETTEXT@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ themedir = $(datadir)/icons/hicolor size = 16x16 context = devices iconsdir = $(themedir)/$(size)/$(context) icons_DATA = \ netspeed-loopback.png \ netspeed-plip.png \ netspeed-ppp.png EXTRA_DIST = \ $(icons_DATA) all: all-am .SUFFIXES: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu icons/16x16/devices/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu icons/16x16/devices/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs install-iconsDATA: $(icons_DATA) @$(NORMAL_INSTALL) test -z "$(iconsdir)" || $(MKDIR_P) "$(DESTDIR)$(iconsdir)" @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(iconsdir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(iconsdir)" || exit $$?; \ done uninstall-iconsDATA: @$(NORMAL_UNINSTALL) @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ test -n "$$files" || exit 0; \ echo " ( cd '$(DESTDIR)$(iconsdir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(iconsdir)" && rm -f $$files tags: TAGS TAGS: ctags: CTAGS CTAGS: distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(DATA) installdirs: for dir in "$(DESTDIR)$(iconsdir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-iconsDATA install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-iconsDATA .MAKE: install-am install-strip .PHONY: all all-am check check-am clean clean-generic clean-libtool \ distclean distclean-generic distclean-libtool distdir dvi \ dvi-am html html-am info info-am install install-am \ install-data install-data-am install-dvi install-dvi-am \ install-exec install-exec-am install-html install-html-am \ install-iconsDATA install-info install-info-am install-man \ install-pdf install-pdf-am install-ps install-ps-am \ install-strip installcheck installcheck-am installdirs \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ uninstall uninstall-am uninstall-iconsDATA # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: netspeed_applet-0.16/icons/16x16/devices/netspeed-loopback.png0000644000175000017500000000035511402426203021161 00000000000000PNG  IHDRabKGD pHYs+tIME "8CzIDAT8c`@NM?.9&\˨HWҖDؼ? `0PҖGWyY=.QOE7PXh300iaa`_B^쿁5#2 0IENDB`netspeed_applet-0.16/icons/16x16/apps/0000755000175000017500000000000011402462054014456 500000000000000netspeed_applet-0.16/icons/16x16/apps/netspeed-applet.png0000644000175000017500000000132711402426203020175 00000000000000PNG  IHDRasBIT|d pHYs B(xtEXtSoftwarewww.inkscape.org<TIDAT8KTa;bXreWFR}"Th5Т!dڔd!1II8י}o Zx{s9Mr9=rf+RϞD H83 >HRr^]=K%k'W#.eiėIl6յD"iv!?KZ!vbm 啥4-d#׮^G)eYhFjBZ뺞{2 `8PYinݹs泥t:8xiD2G R^^AsS3PXXHWWB!:;;ɺ 2L]KK3S?1 LId?Y:i >P0qB$EA>xr3i(7r%2:$&r/r`.=k^{K:6z89B!;Xz/zd{K1>,~g6wvYٝC322Ҋj1p0?;k?u.IENDB`netspeed_applet-0.16/icons/16x16/apps/Makefile.am0000644000175000017500000000026011402426203016424 00000000000000themedir = $(datadir)/icons/hicolor size = 16x16 context = apps iconsdir = $(themedir)/$(size)/$(context) icons_DATA = \ netspeed-applet.png EXTRA_DIST = \ $(icons_DATA) netspeed_applet-0.16/icons/16x16/apps/Makefile.in0000644000175000017500000003067611402461243016456 00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = icons/16x16/apps DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = SOURCES = DIST_SOURCES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__installdirs = "$(DESTDIR)$(iconsdir)" DATA = $(icons_DATA) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ ALL_LINGUAS = @ALL_LINGUAS@ AMTAR = @AMTAR@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CATALOGS = @CATALOGS@ CATOBJEXT = @CATOBJEXT@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ DOC_USER_FORMATS = @DOC_USER_FORMATS@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GMOFILES = @GMOFILES@ GMSGFMT = @GMSGFMT@ GREP = @GREP@ HELP_DIR = @HELP_DIR@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTOBJEXT = @INSTOBJEXT@ INTLLIBS = @INTLLIBS@ INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ INTLTOOL_MERGE = @INTLTOOL_MERGE@ INTLTOOL_PERL = @INTLTOOL_PERL@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ IWLIB = @IWLIB@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ MKINSTALLDIRS = @MKINSTALLDIRS@ MSGFMT = @MSGFMT@ MSGFMT_OPTS = @MSGFMT_OPTS@ MSGMERGE = @MSGMERGE@ NETSPEED_APPLET_CFLAGS = @NETSPEED_APPLET_CFLAGS@ NETSPEED_APPLET_LIBS = @NETSPEED_APPLET_LIBS@ NETSPEED_CFLAGS = @NETSPEED_CFLAGS@ NETSPEED_LIBS = @NETSPEED_LIBS@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OMF_DIR = @OMF_DIR@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ POFILES = @POFILES@ POSUB = @POSUB@ PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ XGETTEXT = @XGETTEXT@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ themedir = $(datadir)/icons/hicolor size = 16x16 context = apps iconsdir = $(themedir)/$(size)/$(context) icons_DATA = \ netspeed-applet.png EXTRA_DIST = \ $(icons_DATA) all: all-am .SUFFIXES: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu icons/16x16/apps/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu icons/16x16/apps/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs install-iconsDATA: $(icons_DATA) @$(NORMAL_INSTALL) test -z "$(iconsdir)" || $(MKDIR_P) "$(DESTDIR)$(iconsdir)" @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(iconsdir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(iconsdir)" || exit $$?; \ done uninstall-iconsDATA: @$(NORMAL_UNINSTALL) @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ test -n "$$files" || exit 0; \ echo " ( cd '$(DESTDIR)$(iconsdir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(iconsdir)" && rm -f $$files tags: TAGS TAGS: ctags: CTAGS CTAGS: distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(DATA) installdirs: for dir in "$(DESTDIR)$(iconsdir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-iconsDATA install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-iconsDATA .MAKE: install-am install-strip .PHONY: all all-am check check-am clean clean-generic clean-libtool \ distclean distclean-generic distclean-libtool distdir dvi \ dvi-am html html-am info info-am install install-am \ install-data install-data-am install-dvi install-dvi-am \ install-exec install-exec-am install-html install-html-am \ install-iconsDATA install-info install-info-am install-man \ install-pdf install-pdf-am install-ps install-ps-am \ install-strip installcheck installcheck-am installdirs \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ uninstall uninstall-am uninstall-iconsDATA # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: netspeed_applet-0.16/icons/Makefile.in0000644000175000017500000004400411402461244014715 00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = icons DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-dvi-recursive install-exec-recursive \ install-html-recursive install-info-recursive \ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ distdir ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" ACLOCAL = @ACLOCAL@ ALL_LINGUAS = @ALL_LINGUAS@ AMTAR = @AMTAR@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CATALOGS = @CATALOGS@ CATOBJEXT = @CATOBJEXT@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ DOC_USER_FORMATS = @DOC_USER_FORMATS@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GMOFILES = @GMOFILES@ GMSGFMT = @GMSGFMT@ GREP = @GREP@ HELP_DIR = @HELP_DIR@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTOBJEXT = @INSTOBJEXT@ INTLLIBS = @INTLLIBS@ INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ INTLTOOL_MERGE = @INTLTOOL_MERGE@ INTLTOOL_PERL = @INTLTOOL_PERL@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ IWLIB = @IWLIB@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ MKINSTALLDIRS = @MKINSTALLDIRS@ MSGFMT = @MSGFMT@ MSGFMT_OPTS = @MSGFMT_OPTS@ MSGMERGE = @MSGMERGE@ NETSPEED_APPLET_CFLAGS = @NETSPEED_APPLET_CFLAGS@ NETSPEED_APPLET_LIBS = @NETSPEED_APPLET_LIBS@ NETSPEED_CFLAGS = @NETSPEED_CFLAGS@ NETSPEED_LIBS = @NETSPEED_LIBS@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OMF_DIR = @OMF_DIR@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ POFILES = @POFILES@ POSUB = @POSUB@ PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ XGETTEXT = @XGETTEXT@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ SUBDIRS = 16x16 22x22 24x24 32x32 48x48 scalable gtk_update_icon_cache = gtk-update-icon-cache -f -t $(datadir)/icons/hicolor all: all-recursive .SUFFIXES: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu icons/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu icons/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" $(RECURSIVE_CLEAN_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done check-am: all-am check: check-recursive all-am: Makefile installdirs: installdirs-recursive installdirs-am: install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-recursive -rm -f Makefile distclean-am: clean-am distclean-generic distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: @$(NORMAL_INSTALL) $(MAKE) $(AM_MAKEFLAGS) install-data-hook install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: @$(NORMAL_INSTALL) $(MAKE) $(AM_MAKEFLAGS) uninstall-hook .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ install-am install-data-am install-strip tags-recursive \ uninstall-am .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ all all-am check check-am clean clean-generic clean-libtool \ ctags ctags-recursive distclean distclean-generic \ distclean-libtool distclean-tags distdir dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-data-hook install-dvi install-dvi-am \ install-exec install-exec-am install-html install-html-am \ install-info install-info-am install-man install-pdf \ install-pdf-am install-ps install-ps-am install-strip \ installcheck installcheck-am installdirs installdirs-am \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags tags-recursive uninstall uninstall-am uninstall-hook install-data-hook: update-icon-cache uninstall-hook: update-icon-cache update-icon-cache: @-if test -z "$(DESTDIR)"; then \ echo "Updating Gtk icon cache."; \ $(gtk_update_icon_cache); \ else \ echo "*** Icon cache not updated. After (un)install, run this:"; \ echo "*** $(gtk_update_icon_cache)"; \ fi # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: netspeed_applet-0.16/icons/22x22/0000755000175000017500000000000011402462055013506 500000000000000netspeed_applet-0.16/icons/22x22/Makefile.am0000644000175000017500000000002011402426203015445 00000000000000SUBDIRS = apps netspeed_applet-0.16/icons/22x22/Makefile.in0000644000175000017500000004265711402461243015507 00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = icons/22x22 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-dvi-recursive install-exec-recursive \ install-html-recursive install-info-recursive \ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ distdir ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" ACLOCAL = @ACLOCAL@ ALL_LINGUAS = @ALL_LINGUAS@ AMTAR = @AMTAR@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CATALOGS = @CATALOGS@ CATOBJEXT = @CATOBJEXT@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ DOC_USER_FORMATS = @DOC_USER_FORMATS@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GMOFILES = @GMOFILES@ GMSGFMT = @GMSGFMT@ GREP = @GREP@ HELP_DIR = @HELP_DIR@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTOBJEXT = @INSTOBJEXT@ INTLLIBS = @INTLLIBS@ INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ INTLTOOL_MERGE = @INTLTOOL_MERGE@ INTLTOOL_PERL = @INTLTOOL_PERL@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ IWLIB = @IWLIB@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ MKINSTALLDIRS = @MKINSTALLDIRS@ MSGFMT = @MSGFMT@ MSGFMT_OPTS = @MSGFMT_OPTS@ MSGMERGE = @MSGMERGE@ NETSPEED_APPLET_CFLAGS = @NETSPEED_APPLET_CFLAGS@ NETSPEED_APPLET_LIBS = @NETSPEED_APPLET_LIBS@ NETSPEED_CFLAGS = @NETSPEED_CFLAGS@ NETSPEED_LIBS = @NETSPEED_LIBS@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OMF_DIR = @OMF_DIR@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ POFILES = @POFILES@ POSUB = @POSUB@ PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ XGETTEXT = @XGETTEXT@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ SUBDIRS = apps all: all-recursive .SUFFIXES: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu icons/22x22/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu icons/22x22/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" $(RECURSIVE_CLEAN_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done check-am: all-am check: check-recursive all-am: Makefile installdirs: installdirs-recursive installdirs-am: install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-recursive -rm -f Makefile distclean-am: clean-am distclean-generic distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ install-am install-strip tags-recursive .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ all all-am check check-am clean clean-generic clean-libtool \ ctags ctags-recursive distclean distclean-generic \ distclean-libtool distclean-tags distdir dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-dvi install-dvi-am install-exec \ install-exec-am install-html install-html-am install-info \ install-info-am install-man install-pdf install-pdf-am \ install-ps install-ps-am install-strip installcheck \ installcheck-am installdirs installdirs-am maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-generic \ mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ uninstall uninstall-am # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: netspeed_applet-0.16/icons/22x22/apps/0000755000175000017500000000000011402462056014452 500000000000000netspeed_applet-0.16/icons/22x22/apps/netspeed-applet.png0000644000175000017500000000177211402426203020173 00000000000000PNG  IHDRĴl;sBIT|d pHYs B(xtEXtSoftwarewww.inkscape.org<wIDAT8ML\UsϽs LRPqh-6ƴ&V MF11q7TR`aLc\ F񇅆iêJ%Kv'B{af@ܳ8;\ Yk6- OaדR 0OX>Gl澢D"@IIIAleeO{@uu ZX*h4m@ ,. Z9̣$JD PWFCM: }:S)ʌ X-rCRjuF: 8JyJs{Zݐq۵dy|;-SE6e[1x1]aVA,Nrsuܚڇ@ÆYxP(tnnJ3/QZ80p'78YwvS7ӎGRyBRswsUgg'vVdXcɷZٳg/cHizqtttuWW>lM`rcEU"4y+mVH:IsЮg!v1lF)X,eYd~ea?q]oecעqW `9Q<Ǯ,wOc$/iʙCS7"B0L8+3 m<[UG.]3;xWo$R $@h/RO7.\7'27'8@* @ľp_KEyI'FNnRLF- ;jҝ+=7/_{":~=IENDB`netspeed_applet-0.16/icons/22x22/apps/Makefile.am0000644000175000017500000000026011402426203016416 00000000000000themedir = $(datadir)/icons/hicolor size = 22x22 context = apps iconsdir = $(themedir)/$(size)/$(context) icons_DATA = \ netspeed-applet.png EXTRA_DIST = \ $(icons_DATA) netspeed_applet-0.16/icons/22x22/apps/Makefile.in0000644000175000017500000003067611402461243016450 00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = icons/22x22/apps DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = SOURCES = DIST_SOURCES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__installdirs = "$(DESTDIR)$(iconsdir)" DATA = $(icons_DATA) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ ALL_LINGUAS = @ALL_LINGUAS@ AMTAR = @AMTAR@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CATALOGS = @CATALOGS@ CATOBJEXT = @CATOBJEXT@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ DOC_USER_FORMATS = @DOC_USER_FORMATS@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GMOFILES = @GMOFILES@ GMSGFMT = @GMSGFMT@ GREP = @GREP@ HELP_DIR = @HELP_DIR@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTOBJEXT = @INSTOBJEXT@ INTLLIBS = @INTLLIBS@ INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ INTLTOOL_MERGE = @INTLTOOL_MERGE@ INTLTOOL_PERL = @INTLTOOL_PERL@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ IWLIB = @IWLIB@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ MKINSTALLDIRS = @MKINSTALLDIRS@ MSGFMT = @MSGFMT@ MSGFMT_OPTS = @MSGFMT_OPTS@ MSGMERGE = @MSGMERGE@ NETSPEED_APPLET_CFLAGS = @NETSPEED_APPLET_CFLAGS@ NETSPEED_APPLET_LIBS = @NETSPEED_APPLET_LIBS@ NETSPEED_CFLAGS = @NETSPEED_CFLAGS@ NETSPEED_LIBS = @NETSPEED_LIBS@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OMF_DIR = @OMF_DIR@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ POFILES = @POFILES@ POSUB = @POSUB@ PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ XGETTEXT = @XGETTEXT@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ themedir = $(datadir)/icons/hicolor size = 22x22 context = apps iconsdir = $(themedir)/$(size)/$(context) icons_DATA = \ netspeed-applet.png EXTRA_DIST = \ $(icons_DATA) all: all-am .SUFFIXES: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu icons/22x22/apps/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu icons/22x22/apps/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs install-iconsDATA: $(icons_DATA) @$(NORMAL_INSTALL) test -z "$(iconsdir)" || $(MKDIR_P) "$(DESTDIR)$(iconsdir)" @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(iconsdir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(iconsdir)" || exit $$?; \ done uninstall-iconsDATA: @$(NORMAL_UNINSTALL) @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ test -n "$$files" || exit 0; \ echo " ( cd '$(DESTDIR)$(iconsdir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(iconsdir)" && rm -f $$files tags: TAGS TAGS: ctags: CTAGS CTAGS: distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(DATA) installdirs: for dir in "$(DESTDIR)$(iconsdir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-iconsDATA install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-iconsDATA .MAKE: install-am install-strip .PHONY: all all-am check check-am clean clean-generic clean-libtool \ distclean distclean-generic distclean-libtool distdir dvi \ dvi-am html html-am info info-am install install-am \ install-data install-data-am install-dvi install-dvi-am \ install-exec install-exec-am install-html install-html-am \ install-iconsDATA install-info install-info-am install-man \ install-pdf install-pdf-am install-ps install-ps-am \ install-strip installcheck installcheck-am installdirs \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ uninstall uninstall-am uninstall-iconsDATA # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: netspeed_applet-0.16/icons/24x24/0000755000175000017500000000000011402462057013514 500000000000000netspeed_applet-0.16/icons/24x24/Makefile.am0000644000175000017500000000002711402426203015460 00000000000000SUBDIRS = apps status netspeed_applet-0.16/icons/24x24/Makefile.in0000644000175000017500000004266611402461243015513 00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = icons/24x24 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-dvi-recursive install-exec-recursive \ install-html-recursive install-info-recursive \ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ distdir ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" ACLOCAL = @ACLOCAL@ ALL_LINGUAS = @ALL_LINGUAS@ AMTAR = @AMTAR@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CATALOGS = @CATALOGS@ CATOBJEXT = @CATOBJEXT@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ DOC_USER_FORMATS = @DOC_USER_FORMATS@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GMOFILES = @GMOFILES@ GMSGFMT = @GMSGFMT@ GREP = @GREP@ HELP_DIR = @HELP_DIR@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTOBJEXT = @INSTOBJEXT@ INTLLIBS = @INTLLIBS@ INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ INTLTOOL_MERGE = @INTLTOOL_MERGE@ INTLTOOL_PERL = @INTLTOOL_PERL@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ IWLIB = @IWLIB@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ MKINSTALLDIRS = @MKINSTALLDIRS@ MSGFMT = @MSGFMT@ MSGFMT_OPTS = @MSGFMT_OPTS@ MSGMERGE = @MSGMERGE@ NETSPEED_APPLET_CFLAGS = @NETSPEED_APPLET_CFLAGS@ NETSPEED_APPLET_LIBS = @NETSPEED_APPLET_LIBS@ NETSPEED_CFLAGS = @NETSPEED_CFLAGS@ NETSPEED_LIBS = @NETSPEED_LIBS@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OMF_DIR = @OMF_DIR@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ POFILES = @POFILES@ POSUB = @POSUB@ PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ XGETTEXT = @XGETTEXT@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ SUBDIRS = apps status all: all-recursive .SUFFIXES: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu icons/24x24/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu icons/24x24/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" $(RECURSIVE_CLEAN_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done check-am: all-am check: check-recursive all-am: Makefile installdirs: installdirs-recursive installdirs-am: install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-recursive -rm -f Makefile distclean-am: clean-am distclean-generic distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ install-am install-strip tags-recursive .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ all all-am check check-am clean clean-generic clean-libtool \ ctags ctags-recursive distclean distclean-generic \ distclean-libtool distclean-tags distdir dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-dvi install-dvi-am install-exec \ install-exec-am install-html install-html-am install-info \ install-info-am install-man install-pdf install-pdf-am \ install-ps install-ps-am install-strip installcheck \ installcheck-am installdirs installdirs-am maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-generic \ mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ uninstall uninstall-am # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: netspeed_applet-0.16/icons/24x24/apps/0000755000175000017500000000000011402462057014457 500000000000000netspeed_applet-0.16/icons/24x24/apps/netspeed-applet.png0000644000175000017500000000212511402426203020170 00000000000000PNG  IHDRw=sBIT|d pHYs B(xtEXtSoftwarewww.inkscape.org<IDATH]H%e9__K!.*DQNƂЅFDxveAEWYJ-^d n*+|x<:sf.g̼gJlBx^,²LLD,.Ad @  {q E+$1R:eIa#XIW].}Ñ@@J D+G"}AxWܡ%$i+E1[#kTVTrm:FHe"]S 2Yt:@eiIyxxb<(x|hrrJ}ݷC,;v9u4>['@uP߀o>eOv%$ctttPd]p@Xby~anQTTDSS3Efp477( ( (BWWiZ###қ]owǰ,FGG)--EUUKA@4f"!HĮ77?ȆIC5t]99v$ 뺱H|6a)5q?I$kW7g ysJ-P6 /ͅw Rz[c~Vjs<ߜ5117 M2ANJ{i؝?7uėpt{{;5M̦.dhUYv\~źWC^[NH ={k-?|}]_p,b IiqeN{pUj rVr!)?UcG/_cñ-gIENDB`netspeed_applet-0.16/icons/24x24/apps/Makefile.am0000644000175000017500000000026011402426203016422 00000000000000themedir = $(datadir)/icons/hicolor size = 24x24 context = apps iconsdir = $(themedir)/$(size)/$(context) icons_DATA = \ netspeed-applet.png EXTRA_DIST = \ $(icons_DATA) netspeed_applet-0.16/icons/24x24/apps/Makefile.in0000644000175000017500000003067611402461243016454 00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = icons/24x24/apps DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = SOURCES = DIST_SOURCES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__installdirs = "$(DESTDIR)$(iconsdir)" DATA = $(icons_DATA) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ ALL_LINGUAS = @ALL_LINGUAS@ AMTAR = @AMTAR@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CATALOGS = @CATALOGS@ CATOBJEXT = @CATOBJEXT@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ DOC_USER_FORMATS = @DOC_USER_FORMATS@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GMOFILES = @GMOFILES@ GMSGFMT = @GMSGFMT@ GREP = @GREP@ HELP_DIR = @HELP_DIR@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTOBJEXT = @INSTOBJEXT@ INTLLIBS = @INTLLIBS@ INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ INTLTOOL_MERGE = @INTLTOOL_MERGE@ INTLTOOL_PERL = @INTLTOOL_PERL@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ IWLIB = @IWLIB@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ MKINSTALLDIRS = @MKINSTALLDIRS@ MSGFMT = @MSGFMT@ MSGFMT_OPTS = @MSGFMT_OPTS@ MSGMERGE = @MSGMERGE@ NETSPEED_APPLET_CFLAGS = @NETSPEED_APPLET_CFLAGS@ NETSPEED_APPLET_LIBS = @NETSPEED_APPLET_LIBS@ NETSPEED_CFLAGS = @NETSPEED_CFLAGS@ NETSPEED_LIBS = @NETSPEED_LIBS@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OMF_DIR = @OMF_DIR@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ POFILES = @POFILES@ POSUB = @POSUB@ PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ XGETTEXT = @XGETTEXT@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ themedir = $(datadir)/icons/hicolor size = 24x24 context = apps iconsdir = $(themedir)/$(size)/$(context) icons_DATA = \ netspeed-applet.png EXTRA_DIST = \ $(icons_DATA) all: all-am .SUFFIXES: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu icons/24x24/apps/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu icons/24x24/apps/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs install-iconsDATA: $(icons_DATA) @$(NORMAL_INSTALL) test -z "$(iconsdir)" || $(MKDIR_P) "$(DESTDIR)$(iconsdir)" @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(iconsdir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(iconsdir)" || exit $$?; \ done uninstall-iconsDATA: @$(NORMAL_UNINSTALL) @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ test -n "$$files" || exit 0; \ echo " ( cd '$(DESTDIR)$(iconsdir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(iconsdir)" && rm -f $$files tags: TAGS TAGS: ctags: CTAGS CTAGS: distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(DATA) installdirs: for dir in "$(DESTDIR)$(iconsdir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-iconsDATA install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-iconsDATA .MAKE: install-am install-strip .PHONY: all all-am check check-am clean clean-generic clean-libtool \ distclean distclean-generic distclean-libtool distdir dvi \ dvi-am html html-am info info-am install install-am \ install-data install-data-am install-dvi install-dvi-am \ install-exec install-exec-am install-html install-html-am \ install-iconsDATA install-info install-info-am install-man \ install-pdf install-pdf-am install-ps install-ps-am \ install-strip installcheck installcheck-am installdirs \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ uninstall uninstall-am uninstall-iconsDATA # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: netspeed_applet-0.16/icons/24x24/status/0000755000175000017500000000000011402462060015031 500000000000000netspeed_applet-0.16/icons/24x24/status/Makefile.am0000644000175000017500000000041411402426203017003 00000000000000themedir = $(datadir)/icons/hicolor size = 24x24 context = status iconsdir = $(themedir)/$(size)/$(context) icons_DATA = \ netspeed-wireless-25.png \ netspeed-wireless-50.png \ netspeed-wireless-75.png \ netspeed-wireless-100.png EXTRA_DIST = \ $(icons_DATA) netspeed_applet-0.16/icons/24x24/status/netspeed-wireless-100.png0000644000175000017500000000110711402426203021415 00000000000000PNG  IHDR+>}sRGBbKGD pHYs  tIME *}oIDAT(M;hSax6>1SP*(":t o$T*ح["JR:D\:ӂ-4ɽ #97 Ttc%o[ '#:3•Bh !ko< _̎UaKrCV\ꂄiznW>O< 6]5㶚#+6qUs-pgo|TĜ7|^wg{n.n};J=A3pFN*7jcKZwh!ruɭ9\|;-< ,U\5ce򠥈7e3`6usB6Qc|ݲ{OܚvgQKZ:<Z#ith!o-Et%}sRGBbKGD pHYs  tIME  DIFIDAT(Ս @Q` Fbx$K)R{'pG x`f]-; l.23I\|?B8 IENDB`netspeed_applet-0.16/icons/24x24/status/Makefile.in0000644000175000017500000003104011402461243017016 00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = icons/24x24/status DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = SOURCES = DIST_SOURCES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__installdirs = "$(DESTDIR)$(iconsdir)" DATA = $(icons_DATA) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ ALL_LINGUAS = @ALL_LINGUAS@ AMTAR = @AMTAR@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CATALOGS = @CATALOGS@ CATOBJEXT = @CATOBJEXT@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ DOC_USER_FORMATS = @DOC_USER_FORMATS@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GMOFILES = @GMOFILES@ GMSGFMT = @GMSGFMT@ GREP = @GREP@ HELP_DIR = @HELP_DIR@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTOBJEXT = @INSTOBJEXT@ INTLLIBS = @INTLLIBS@ INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ INTLTOOL_MERGE = @INTLTOOL_MERGE@ INTLTOOL_PERL = @INTLTOOL_PERL@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ IWLIB = @IWLIB@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ MKINSTALLDIRS = @MKINSTALLDIRS@ MSGFMT = @MSGFMT@ MSGFMT_OPTS = @MSGFMT_OPTS@ MSGMERGE = @MSGMERGE@ NETSPEED_APPLET_CFLAGS = @NETSPEED_APPLET_CFLAGS@ NETSPEED_APPLET_LIBS = @NETSPEED_APPLET_LIBS@ NETSPEED_CFLAGS = @NETSPEED_CFLAGS@ NETSPEED_LIBS = @NETSPEED_LIBS@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OMF_DIR = @OMF_DIR@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ POFILES = @POFILES@ POSUB = @POSUB@ PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ XGETTEXT = @XGETTEXT@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ themedir = $(datadir)/icons/hicolor size = 24x24 context = status iconsdir = $(themedir)/$(size)/$(context) icons_DATA = \ netspeed-wireless-25.png \ netspeed-wireless-50.png \ netspeed-wireless-75.png \ netspeed-wireless-100.png EXTRA_DIST = \ $(icons_DATA) all: all-am .SUFFIXES: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu icons/24x24/status/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu icons/24x24/status/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs install-iconsDATA: $(icons_DATA) @$(NORMAL_INSTALL) test -z "$(iconsdir)" || $(MKDIR_P) "$(DESTDIR)$(iconsdir)" @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(iconsdir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(iconsdir)" || exit $$?; \ done uninstall-iconsDATA: @$(NORMAL_UNINSTALL) @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ test -n "$$files" || exit 0; \ echo " ( cd '$(DESTDIR)$(iconsdir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(iconsdir)" && rm -f $$files tags: TAGS TAGS: ctags: CTAGS CTAGS: distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(DATA) installdirs: for dir in "$(DESTDIR)$(iconsdir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-iconsDATA install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-iconsDATA .MAKE: install-am install-strip .PHONY: all all-am check check-am clean clean-generic clean-libtool \ distclean distclean-generic distclean-libtool distdir dvi \ dvi-am html html-am info info-am install install-am \ install-data install-data-am install-dvi install-dvi-am \ install-exec install-exec-am install-html install-html-am \ install-iconsDATA install-info install-info-am install-man \ install-pdf install-pdf-am install-ps install-ps-am \ install-strip installcheck installcheck-am installdirs \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ uninstall uninstall-am uninstall-iconsDATA # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: netspeed_applet-0.16/icons/24x24/status/netspeed-wireless-50.png0000644000175000017500000000031411402426203021340 00000000000000PNG  IHDR+>}sRGBbKGD pHYs  tIME /:ȩLIDAT(c`goYp) 44U^}XDnf\ dl ߿(ӊ/Wae(4hPEIENDB`netspeed_applet-0.16/icons/24x24/status/netspeed-wireless-75.png0000644000175000017500000000060711402426203021354 00000000000000PNG  IHDR+>}sRGBbKGD pHYs  tIME 2IDAT(c`0cTjSsL>f02330000"KM?=.̿_P8e{'\Qo;!?e2000wg aA?a```Tqzc)#?Odǡka``8}}?~CQu3D200~}[Pi9['ӯ *(F80000(z0G!ykj0c je0|IENDB`netspeed_applet-0.16/icons/scalable/0000755000175000017500000000000011402462064014475 500000000000000netspeed_applet-0.16/icons/scalable/Makefile.am0000644000175000017500000000002011402426203016434 00000000000000SUBDIRS = apps netspeed_applet-0.16/icons/scalable/Makefile.in0000644000175000017500000004267011402461244016472 00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = icons/scalable DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-dvi-recursive install-exec-recursive \ install-html-recursive install-info-recursive \ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ distdir ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" ACLOCAL = @ACLOCAL@ ALL_LINGUAS = @ALL_LINGUAS@ AMTAR = @AMTAR@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CATALOGS = @CATALOGS@ CATOBJEXT = @CATOBJEXT@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ DOC_USER_FORMATS = @DOC_USER_FORMATS@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GMOFILES = @GMOFILES@ GMSGFMT = @GMSGFMT@ GREP = @GREP@ HELP_DIR = @HELP_DIR@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTOBJEXT = @INSTOBJEXT@ INTLLIBS = @INTLLIBS@ INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ INTLTOOL_MERGE = @INTLTOOL_MERGE@ INTLTOOL_PERL = @INTLTOOL_PERL@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ IWLIB = @IWLIB@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ MKINSTALLDIRS = @MKINSTALLDIRS@ MSGFMT = @MSGFMT@ MSGFMT_OPTS = @MSGFMT_OPTS@ MSGMERGE = @MSGMERGE@ NETSPEED_APPLET_CFLAGS = @NETSPEED_APPLET_CFLAGS@ NETSPEED_APPLET_LIBS = @NETSPEED_APPLET_LIBS@ NETSPEED_CFLAGS = @NETSPEED_CFLAGS@ NETSPEED_LIBS = @NETSPEED_LIBS@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OMF_DIR = @OMF_DIR@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ POFILES = @POFILES@ POSUB = @POSUB@ PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ XGETTEXT = @XGETTEXT@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ SUBDIRS = apps all: all-recursive .SUFFIXES: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu icons/scalable/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu icons/scalable/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" $(RECURSIVE_CLEAN_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done check-am: all-am check: check-recursive all-am: Makefile installdirs: installdirs-recursive installdirs-am: install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-recursive -rm -f Makefile distclean-am: clean-am distclean-generic distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ install-am install-strip tags-recursive .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ all all-am check check-am clean clean-generic clean-libtool \ ctags ctags-recursive distclean distclean-generic \ distclean-libtool distclean-tags distdir dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-dvi install-dvi-am install-exec \ install-exec-am install-html install-html-am install-info \ install-info-am install-man install-pdf install-pdf-am \ install-ps install-ps-am install-strip installcheck \ installcheck-am installdirs installdirs-am maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-generic \ mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ uninstall uninstall-am # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: netspeed_applet-0.16/icons/scalable/apps/0000755000175000017500000000000011402462064015440 500000000000000netspeed_applet-0.16/icons/scalable/apps/netspeed-applet.svg0000644000175000017500000024522111402426203021174 00000000000000 image/svg+xml Jakub Steiner http://jimmac.musichall.cz Folder dir folder image/svg+xml netspeed_applet-0.16/icons/scalable/apps/Makefile.am0000644000175000017500000000032511402426203017407 00000000000000themedir = $(datadir)/icons/hicolor size = scalable context = apps iconsdir = $(themedir)/$(size)/$(context) icons_DATA = \ netspeed-applet.svg noinst_DATA = EXTRA_DIST = \ $(icons_DATA) \ $(noinst_DATA) netspeed_applet-0.16/icons/scalable/apps/Makefile.in0000644000175000017500000003077211402461244017435 00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = icons/scalable/apps DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = SOURCES = DIST_SOURCES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__installdirs = "$(DESTDIR)$(iconsdir)" DATA = $(icons_DATA) $(noinst_DATA) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ ALL_LINGUAS = @ALL_LINGUAS@ AMTAR = @AMTAR@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CATALOGS = @CATALOGS@ CATOBJEXT = @CATOBJEXT@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ DOC_USER_FORMATS = @DOC_USER_FORMATS@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GMOFILES = @GMOFILES@ GMSGFMT = @GMSGFMT@ GREP = @GREP@ HELP_DIR = @HELP_DIR@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTOBJEXT = @INSTOBJEXT@ INTLLIBS = @INTLLIBS@ INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ INTLTOOL_MERGE = @INTLTOOL_MERGE@ INTLTOOL_PERL = @INTLTOOL_PERL@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ IWLIB = @IWLIB@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ MKINSTALLDIRS = @MKINSTALLDIRS@ MSGFMT = @MSGFMT@ MSGFMT_OPTS = @MSGFMT_OPTS@ MSGMERGE = @MSGMERGE@ NETSPEED_APPLET_CFLAGS = @NETSPEED_APPLET_CFLAGS@ NETSPEED_APPLET_LIBS = @NETSPEED_APPLET_LIBS@ NETSPEED_CFLAGS = @NETSPEED_CFLAGS@ NETSPEED_LIBS = @NETSPEED_LIBS@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OMF_DIR = @OMF_DIR@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ POFILES = @POFILES@ POSUB = @POSUB@ PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ XGETTEXT = @XGETTEXT@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ themedir = $(datadir)/icons/hicolor size = scalable context = apps iconsdir = $(themedir)/$(size)/$(context) icons_DATA = \ netspeed-applet.svg noinst_DATA = EXTRA_DIST = \ $(icons_DATA) \ $(noinst_DATA) all: all-am .SUFFIXES: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu icons/scalable/apps/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu icons/scalable/apps/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs install-iconsDATA: $(icons_DATA) @$(NORMAL_INSTALL) test -z "$(iconsdir)" || $(MKDIR_P) "$(DESTDIR)$(iconsdir)" @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(iconsdir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(iconsdir)" || exit $$?; \ done uninstall-iconsDATA: @$(NORMAL_UNINSTALL) @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ test -n "$$files" || exit 0; \ echo " ( cd '$(DESTDIR)$(iconsdir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(iconsdir)" && rm -f $$files tags: TAGS TAGS: ctags: CTAGS CTAGS: distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(DATA) installdirs: for dir in "$(DESTDIR)$(iconsdir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-iconsDATA install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-iconsDATA .MAKE: install-am install-strip .PHONY: all all-am check check-am clean clean-generic clean-libtool \ distclean distclean-generic distclean-libtool distdir dvi \ dvi-am html html-am info info-am install install-am \ install-data install-data-am install-dvi install-dvi-am \ install-exec install-exec-am install-html install-html-am \ install-iconsDATA install-info install-info-am install-man \ install-pdf install-pdf-am install-ps install-ps-am \ install-strip installcheck installcheck-am installdirs \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ uninstall uninstall-am uninstall-iconsDATA # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: netspeed_applet-0.16/icons/48x48/0000755000175000017500000000000011402462062013524 500000000000000netspeed_applet-0.16/icons/48x48/Makefile.am0000644000175000017500000000002011402426203015465 00000000000000SUBDIRS = apps netspeed_applet-0.16/icons/48x48/Makefile.in0000644000175000017500000004265711402461244015530 00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = icons/48x48 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-dvi-recursive install-exec-recursive \ install-html-recursive install-info-recursive \ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ distdir ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" ACLOCAL = @ACLOCAL@ ALL_LINGUAS = @ALL_LINGUAS@ AMTAR = @AMTAR@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CATALOGS = @CATALOGS@ CATOBJEXT = @CATOBJEXT@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ DOC_USER_FORMATS = @DOC_USER_FORMATS@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GMOFILES = @GMOFILES@ GMSGFMT = @GMSGFMT@ GREP = @GREP@ HELP_DIR = @HELP_DIR@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTOBJEXT = @INSTOBJEXT@ INTLLIBS = @INTLLIBS@ INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ INTLTOOL_MERGE = @INTLTOOL_MERGE@ INTLTOOL_PERL = @INTLTOOL_PERL@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ IWLIB = @IWLIB@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ MKINSTALLDIRS = @MKINSTALLDIRS@ MSGFMT = @MSGFMT@ MSGFMT_OPTS = @MSGFMT_OPTS@ MSGMERGE = @MSGMERGE@ NETSPEED_APPLET_CFLAGS = @NETSPEED_APPLET_CFLAGS@ NETSPEED_APPLET_LIBS = @NETSPEED_APPLET_LIBS@ NETSPEED_CFLAGS = @NETSPEED_CFLAGS@ NETSPEED_LIBS = @NETSPEED_LIBS@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OMF_DIR = @OMF_DIR@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ POFILES = @POFILES@ POSUB = @POSUB@ PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ XGETTEXT = @XGETTEXT@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ SUBDIRS = apps all: all-recursive .SUFFIXES: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu icons/48x48/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu icons/48x48/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" $(RECURSIVE_CLEAN_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done check-am: all-am check: check-recursive all-am: Makefile installdirs: installdirs-recursive installdirs-am: install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-recursive -rm -f Makefile distclean-am: clean-am distclean-generic distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ install-am install-strip tags-recursive .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ all all-am check check-am clean clean-generic clean-libtool \ ctags ctags-recursive distclean distclean-generic \ distclean-libtool distclean-tags distdir dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-dvi install-dvi-am install-exec \ install-exec-am install-html install-html-am install-info \ install-info-am install-man install-pdf install-pdf-am \ install-ps install-ps-am install-strip installcheck \ installcheck-am installdirs installdirs-am maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-generic \ mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ uninstall uninstall-am # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: netspeed_applet-0.16/icons/48x48/apps/0000755000175000017500000000000011402462063014470 500000000000000netspeed_applet-0.16/icons/48x48/apps/netspeed-applet.png0000644000175000017500000000662211402426203020212 00000000000000PNG  IHDR00WsBIT|d pHYs B(xtEXtSoftwarewww.inkscape.org< IDAThYytT}[FeF} CLL;bnQI?ZC1NIS>`1-Hwo22ߜwr!,wb$?kYփ L/)$ò?dXZZioP[h(ntۿO==tਭzRS3i1Z0-*8C0XWQ|s_=2u숀K*-K]`lǾ; &!ܸ/QS}9P||,^޾(غe3ϟ .#L`pAo@c {j^̛7<:dJXx8|u5*jq'X( ~p{0pc%0s 'j*p q`y 9=?^eEKBC #upڭl@9F@B$Q-I#D  SV$@D88>Isɞ >S*Y!"-YʲBu|ƅP (BFsЌ,j/+NW<躆NEh:慌Ax$xgaFQ,{ b3> C]C1ҥKEzDA%;e455؟B:{h@> Tnwqغuk4k.lٲe͛7;w⩧@E-~x>lowwQx^aH&0- G}{0MKq4 `Y^~elڴ)p@ a~5^z%]w޹Hq{\^;e$y7S AMR>м\ k# 9BeRX::EFDkس~LLnw_}=c٬ PHjnQ&]*U?$J*F u5~7P]<(yS$p<]ʐPsn<-^g-%m%B`Piyת/kb@2m:f5Vg+L&_vJz؇G"5ou}=O׀ <mlx\ Jlq)qtO^! d=yɌyIFB?X1k TW.^~Lۈ&\~>Nm4Ji3W=?|({[66T{jPdMaᤁx25q3t $7k Lf?.`-73! '{{KqB!R=.ߴEk߫ Y,Yݑ]cOЋ\R|_[Ӥ4-۸?zNTZ=MXiVq / ۅn'ӈ'3,Mh!1۵ޞ--u1ّV' n{({A7t*|'~Uej6nDzqB':|̯V*V65*J/a9EMHfh\mۆNdA0#n0km16iZ,Ozl0 y_y_`ق鞔nСu mvrQFCښWʾGI+4XW2EaSk b4ѤtԾ%{f"{$`hyVX;㞟7WvdMx<5)uq% f(Mٝd/\Z3~@i`D:S'( x$°(b=iD) 'fJʞN;ߍ]@N>v0@壁[V}jBj:J~%͕v`"0ūnEa%IhmuUUB!~/^  ˅fW4Ii~ _]8 V6.w\jU@ɯ+yTW7g1NMgݿ'4 Prefͥe#?ʙP&X\u"Ѥ؎cetLESBe$Z-*gĠo'Z=lUn[V @sgYSjYaB7-4z&kH`nHE8`d @; ObMkDB>WRc/e Ӿx/ 6-x,b lB FSf&q*v,\<@Jj[o7zrc⭿ xIm=q/}@:9ShAIi #AZ[[rIG 1.Xn&'QKcYKKoIENDB`netspeed_applet-0.16/icons/48x48/apps/Makefile.am0000644000175000017500000000026111402426203016437 00000000000000themedir = $(datadir)/icons/hicolor size = 48x48 context = apps iconsdir = $(themedir)/$(size)/$(context) icons_DATA = \ netspeed-applet.png EXTRA_DIST = \ $(icons_DATA) netspeed_applet-0.16/icons/48x48/apps/Makefile.in0000644000175000017500000003067611402461244016471 00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = icons/48x48/apps DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \ $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = SOURCES = DIST_SOURCES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__installdirs = "$(DESTDIR)$(iconsdir)" DATA = $(icons_DATA) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ ALL_LINGUAS = @ALL_LINGUAS@ AMTAR = @AMTAR@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CATALOGS = @CATALOGS@ CATOBJEXT = @CATOBJEXT@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ DOC_USER_FORMATS = @DOC_USER_FORMATS@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GMOFILES = @GMOFILES@ GMSGFMT = @GMSGFMT@ GREP = @GREP@ HELP_DIR = @HELP_DIR@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTOBJEXT = @INSTOBJEXT@ INTLLIBS = @INTLLIBS@ INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ INTLTOOL_MERGE = @INTLTOOL_MERGE@ INTLTOOL_PERL = @INTLTOOL_PERL@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ IWLIB = @IWLIB@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ MKINSTALLDIRS = @MKINSTALLDIRS@ MSGFMT = @MSGFMT@ MSGFMT_OPTS = @MSGFMT_OPTS@ MSGMERGE = @MSGMERGE@ NETSPEED_APPLET_CFLAGS = @NETSPEED_APPLET_CFLAGS@ NETSPEED_APPLET_LIBS = @NETSPEED_APPLET_LIBS@ NETSPEED_CFLAGS = @NETSPEED_CFLAGS@ NETSPEED_LIBS = @NETSPEED_LIBS@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OMF_DIR = @OMF_DIR@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ POFILES = @POFILES@ POSUB = @POSUB@ PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ XGETTEXT = @XGETTEXT@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ themedir = $(datadir)/icons/hicolor size = 48x48 context = apps iconsdir = $(themedir)/$(size)/$(context) icons_DATA = \ netspeed-applet.png EXTRA_DIST = \ $(icons_DATA) all: all-am .SUFFIXES: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu icons/48x48/apps/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu icons/48x48/apps/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs install-iconsDATA: $(icons_DATA) @$(NORMAL_INSTALL) test -z "$(iconsdir)" || $(MKDIR_P) "$(DESTDIR)$(iconsdir)" @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(iconsdir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(iconsdir)" || exit $$?; \ done uninstall-iconsDATA: @$(NORMAL_UNINSTALL) @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ test -n "$$files" || exit 0; \ echo " ( cd '$(DESTDIR)$(iconsdir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(iconsdir)" && rm -f $$files tags: TAGS TAGS: ctags: CTAGS CTAGS: distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(DATA) installdirs: for dir in "$(DESTDIR)$(iconsdir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-iconsDATA install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-iconsDATA .MAKE: install-am install-strip .PHONY: all all-am check check-am clean clean-generic clean-libtool \ distclean distclean-generic distclean-libtool distdir dvi \ dvi-am html html-am info info-am install install-am \ install-data install-data-am install-dvi install-dvi-am \ install-exec install-exec-am install-html install-html-am \ install-iconsDATA install-info install-info-am install-man \ install-pdf install-pdf-am install-ps install-ps-am \ install-strip installcheck installcheck-am installdirs \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ uninstall uninstall-am uninstall-iconsDATA # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: netspeed_applet-0.16/intltool-extract.in0000644000175000017500000000000011402461230015360 00000000000000netspeed_applet-0.16/po/0000755000175000017500000000000011402462066012234 500000000000000netspeed_applet-0.16/po/id.po0000644000175000017500000001237411402426203013110 00000000000000# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # Imam Musthaqim , 2009. # msgid "" msgstr "" "Project-Id-Version: netspeed.HEAD\n" "Report-Msgid-Bugs-To: http://bugzilla.gnome.org/enter_bug.cgi?" "product=netspeed&component=general\n" "POT-Creation-Date: 2009-04-27 05:43+0000\n" "PO-Revision-Date: 2009-04-02 18:33+0700\n" "Last-Translator: Imam Musthaqim \n" "Language-Team: INDONESIA \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=utf-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Poedit-Language: Indonesian\n" "X-Poedit-Country: INDONESIA\n" #: ../GNOME_NetspeedApplet.server.in.in.h:1 msgid "Internet" msgstr "Internet" #: ../GNOME_NetspeedApplet.server.in.in.h:2 msgid "Netspeed Applet" msgstr "Applet Netspeed" #: ../GNOME_NetspeedApplet.server.in.in.h:3 msgid "Netspeed Applet Factory" msgstr "Pabrik Applet Netspeed" #: ../GNOME_NetspeedApplet.server.in.in.h:4 msgid "Network Monitor" msgstr "Monitor Jaringan" #: ../src/netspeed.c:407 msgid "b/s" msgstr "b/d" #: ../src/netspeed.c:407 msgid "B/s" msgstr "B/d" #: ../src/netspeed.c:409 msgid "bits" msgstr "bit" #: ../src/netspeed.c:409 msgid "bytes" msgstr "byte" #: ../src/netspeed.c:416 msgid "kb/s" msgstr "kb/d" #: ../src/netspeed.c:416 msgid "KiB/s" msgstr "KiB/d" #: ../src/netspeed.c:418 msgid "kb" msgstr "kb" #: ../src/netspeed.c:418 msgid "KiB" msgstr "KiB" #: ../src/netspeed.c:427 msgid "Mb/s" msgstr "Mb/d" #: ../src/netspeed.c:427 msgid "MiB/s" msgstr "MiB/d" #: ../src/netspeed.c:429 msgid "Mb" msgstr "Mb" #: ../src/netspeed.c:429 msgid "MiB" msgstr "MiB" #: ../src/netspeed.c:755 #, c-format msgid "" "There was an error displaying help:\n" "%s" msgstr "" "Terjadi kesalahan saat menampilkan bantuan:\n" "%s" #: ../src/netspeed.c:806 #, c-format msgid "" "Failed to show:\n" "%s" msgstr "" "Gagal menampilkan:\n" "%s" #: ../src/netspeed.c:837 msgid "" "A little applet that displays some information on the traffic on the " "specified network device" msgstr "" "Applet kecil yang menampilkan beberapa informasi tentang lalulintas pada " "perangkat jaringan spesifik" #: ../src/netspeed.c:840 msgid "translator-credits" msgstr "Imam Musthaqim " #: ../src/netspeed.c:842 msgid "Netspeed Website" msgstr "Situs Web Netspeed" #: ../src/netspeed.c:968 msgid "Netspeed Preferences" msgstr "Preferensi Netspeed" #: ../src/netspeed.c:991 msgid "General Settings" msgstr "Setelan Umum" #: ../src/netspeed.c:1012 msgid "Network _device:" msgstr "_Perangkat jaringan:" #. Default means device with default route set #: ../src/netspeed.c:1023 msgid "Default" msgstr "Default" #: ../src/netspeed.c:1036 msgid "Show _sum instead of in & out" msgstr "Tampilkan _jumlah sebagai ganti yang masuk & keluar" #: ../src/netspeed.c:1040 msgid "Show _bits instead of bytes" msgstr "Tampilkan _bit sebagai ganti byte" #: ../src/netspeed.c:1044 msgid "Change _icon according to the selected device" msgstr "Ubah _ikon sesuai dengan perangkat yang dipilih" #: ../src/netspeed.c:1155 #, c-format msgid "Device Details for %s" msgstr "Rincian Perangkat untuk %s" #: ../src/netspeed.c:1181 msgid "_In graph color" msgstr "_Warna grafik masuk" #: ../src/netspeed.c:1182 msgid "_Out graph color" msgstr "_Warna grafik keluar" #: ../src/netspeed.c:1198 msgid "Internet Address:" msgstr "Alamat Internet:" #: ../src/netspeed.c:1199 msgid "Netmask:" msgstr "Netmask:" #: ../src/netspeed.c:1200 msgid "Hardware Address:" msgstr "Alamat Perangkat Keras:" #: ../src/netspeed.c:1201 msgid "P-t-P Address:" msgstr "Alamat P-t-P:" #: ../src/netspeed.c:1202 msgid "Bytes in:" msgstr "Byte masuk:" #: ../src/netspeed.c:1203 msgid "Bytes out:" msgstr "Byte keluar:" #: ../src/netspeed.c:1205 ../src/netspeed.c:1206 ../src/netspeed.c:1207 #: ../src/netspeed.c:1208 msgid "none" msgstr "tidak ada" #: ../src/netspeed.c:1247 msgid "IPv6 Address:" msgstr "Alamat IPv6:" #: ../src/netspeed.c:1279 msgid "Signal Strength:" msgstr "Kekuatan Sinyal:" #: ../src/netspeed.c:1280 msgid "ESSID:" msgstr "ESSID:" #: ../src/netspeed.c:1366 #, c-format msgid "Do you want to disconnect %s now?" msgstr "Anda ingin memutuskan %s sekarang?" #: ../src/netspeed.c:1370 #, c-format msgid "Do you want to connect %s now?" msgstr "Anda ingin menghubungkan %s sekarang?" #: ../src/netspeed.c:1444 #, c-format msgid "%s is down" msgstr "%s mati" #: ../src/netspeed.c:1449 #, c-format msgid "" "%s: %s\n" "in: %s out: %s" msgstr "" "%s: %s\n" "masuk: %s keluar: %s" #: ../src/netspeed.c:1451 ../src/netspeed.c:1460 msgid "has no ip" msgstr "tidak memiliki ip" #: ../src/netspeed.c:1458 #, c-format msgid "" "%s: %s\n" "sum: %s" msgstr "" "%s: %s\n" "jumlah: %s" #: ../src/netspeed.c:1467 #, c-format msgid "" "\n" "ESSID: %s\n" "Strength: %d %%" msgstr "" "\n" "ESSID: %s\n" "Kekuatan: %d %%" #: ../src/netspeed.c:1468 msgid "unknown" msgstr "tidak diketahui" #: ../src/netspeed.c:1515 msgid "Netspeed" msgstr "Netspeed" #: ../src/netspeed.c:1683 msgid "Device _Details" msgstr "_Rincian Perangkat" #: ../src/netspeed.c:1683 msgid "_Preferences..." msgstr "_Preferensi..." #: ../src/netspeed.c:1683 msgid "_Help" msgstr "_Bantuan" #: ../src/netspeed.c:1683 msgid "_About..." msgstr "_Tentang..." netspeed_applet-0.16/po/ar.po0000644000175000017500000001313711402426203013114 00000000000000# Arabic translations for PACKAGE package. # Copyright (C) 2008 THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # Automatically generated, 2008. # msgid "" msgstr "" "Project-Id-Version: netspeed\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2008-07-31 11:08+0100\n" "PO-Revision-Date: 2008-08-02 10:23+0100\n" "Last-Translator: Djihed Afifi \n" "Language-Team: Arabeyes \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=utf-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Poedit-Language: Arabic\n" #: ../GNOME_NetspeedApplet.server.in.in.h:1 msgid "Internet" msgstr "إنترنت" #: ../GNOME_NetspeedApplet.server.in.in.h:2 #, fuzzy msgid "Netspeed Applet" msgstr "بريمج جافا" #: ../GNOME_NetspeedApplet.server.in.in.h:3 #, fuzzy msgid "Netspeed Applet Factory" msgstr "مصنع بريمج منتقي الرموز" #: ../GNOME_NetspeedApplet.server.in.in.h:4 msgid "Network Monitor" msgstr "مراقب الشبكة" #: ../src/netspeed.c:402 msgid "b/s" msgstr "بت/ثا" #: ../src/netspeed.c:402 msgid "B/s" msgstr "بايت/ثا" #: ../src/netspeed.c:404 msgid "bits" msgstr "بت" #: ../src/netspeed.c:404 msgid "bytes" msgstr "بايت" #: ../src/netspeed.c:411 msgid "kb/s" msgstr "ك.بت/ثا" #: ../src/netspeed.c:411 msgid "KiB/s" msgstr "ك.بايت/ثا" #: ../src/netspeed.c:413 msgid "kb" msgstr "ك.بت" #: ../src/netspeed.c:413 msgid "KiB" msgstr "ك.بايت" #: ../src/netspeed.c:422 msgid "Mb/s" msgstr "م.بت/ثا" #: ../src/netspeed.c:422 msgid "MiB/s" msgstr "م.بايت/ثا" #: ../src/netspeed.c:424 msgid "Mb" msgstr "م.بت" #: ../src/netspeed.c:424 msgid "MiB" msgstr "م.بايت" #: ../src/netspeed.c:739 #, c-format msgid "" "There was an error displaying help:\n" "%s" msgstr "" "حدث خطأ عند عرض المساعدة:\n" "%s" #: ../src/netspeed.c:790 #, fuzzy, c-format msgid "" "Failed to show:\n" "%s" msgstr "فشل تسجيل %s إلى %s" #: ../src/netspeed.c:821 msgid "A little applet that displays some information on the traffic on the specified network device" msgstr "" #: ../src/netspeed.c:824 msgid "translator-credits" msgstr "" "فريق عربآيز للترجمة http://www.arabeyes.org :\n" "جهاد عفيفي\t" #: ../src/netspeed.c:826 #, fuzzy msgid "Netspeed Website" msgstr "موقع شريط المكتب (Deskbar)" #: ../src/netspeed.c:957 #, fuzzy msgid "Netspeed Preferences" msgstr "تفضيلات داشر" #: ../src/netspeed.c:980 msgid "General Settings" msgstr "الإعدادات العامّة" #: ../src/netspeed.c:1001 #, fuzzy msgid "Network _device:" msgstr "جهاز الشبكة" #: ../src/netspeed.c:1022 msgid "Show _sum instead of in & out" msgstr "" #: ../src/netspeed.c:1026 #, fuzzy msgid "Show _bits instead of bytes" msgstr "أظهر زر 'إنهاء' بدل زر 'التالي'" #: ../src/netspeed.c:1030 msgid "Change _icon according to the selected device" msgstr "" #: ../src/netspeed.c:1035 msgid "_Always monitor a connected device, if possible" msgstr "" #: ../src/netspeed.c:1149 #, fuzzy, c-format msgid "Device Details for %s" msgstr "جاري فتح الجهاز للعرض" #: ../src/netspeed.c:1175 #, fuzzy msgid "_In graph color" msgstr "اللون الإفتراضي للرسم البياني للشبكة الداخل" #: ../src/netspeed.c:1176 #, fuzzy msgid "_Out graph color" msgstr "اللون الإفتراضي للرسم البياني للشبكة الخارج" #: ../src/netspeed.c:1192 msgid "Internet Address:" msgstr "عنوان الإنترنت:" #: ../src/netspeed.c:1193 msgid "Netmask:" msgstr "قناع الشّبكة:" #: ../src/netspeed.c:1194 #, fuzzy msgid "Hardware Address:" msgstr "عنوان العتاد:" #: ../src/netspeed.c:1195 #, fuzzy msgid "P-t-P Address:" msgstr "ال_عنوان:" #: ../src/netspeed.c:1196 #, fuzzy msgid "Bytes in:" msgstr "تكبير" #: ../src/netspeed.c:1197 #, fuzzy msgid "Bytes out:" msgstr "اخرج" #: ../src/netspeed.c:1199 #: ../src/netspeed.c:1200 #: ../src/netspeed.c:1201 #: ../src/netspeed.c:1202 msgid "none" msgstr "لا يوجد" #: ../src/netspeed.c:1241 #, fuzzy msgid "IPV6 Address:" msgstr "عنوان البريد الإلكتروني" #: ../src/netspeed.c:1273 #, fuzzy msgid "Signal Strength:" msgstr "قوّة الإشارة" #: ../src/netspeed.c:1274 #, fuzzy msgid "ESSID:" msgstr "ESSID" #: ../src/netspeed.c:1360 #, fuzzy, c-format msgid "Do you want to disconnect %s now?" msgstr "ما الذي تريد فعله الآن؟" #: ../src/netspeed.c:1364 #, fuzzy, c-format msgid "Do you want to connect %s now?" msgstr "ما الذي تريد فعله الآن؟" #: ../src/netspeed.c:1438 #, fuzzy, c-format msgid "%s is down" msgstr "$0: الرّابط متوقّف" #: ../src/netspeed.c:1443 #, fuzzy, c-format msgid "" "%s: %s\n" "in: %s out: %s" msgstr "اخرج" #: ../src/netspeed.c:1445 #: ../src/netspeed.c:1454 #, fuzzy msgid "has no ip" msgstr "ليس له أحداث." #: ../src/netspeed.c:1452 #, c-format msgid "" "%s: %s\n" "sum: %s" msgstr "" "%s: %s\n" "مجموع: %s" #: ../src/netspeed.c:1461 #, c-format msgid "" "\n" "ESSID: %s\n" "Strength: %d %%" msgstr "" "\n" "قيمة ESSID: %s\n" "القوة: %d %%" #: ../src/netspeed.c:1462 msgid "unknown" msgstr "مجهول" #: ../src/netspeed.c:1509 msgid "Netspeed" msgstr "" #: ../src/netspeed.c:1677 msgid "Device _Details" msgstr "ت_فاصيل الجهاز" #: ../src/netspeed.c:1677 msgid "_Preferences..." msgstr "ت_فضيلات" #: ../src/netspeed.c:1677 msgid "_Help" msgstr "م_ساعدة" #: ../src/netspeed.c:1677 msgid "_About..." msgstr "_حول..." netspeed_applet-0.16/po/sl.po0000644000175000017500000001275111402426203013131 00000000000000# Slovenian translation for netspeed. # Copyright (C) 2009 netspeed COPYRIGHT HOLDER # This file is distributed under the same license as the netspeed package. # # Matej Urbančič , 2008 - 2010. # msgid "" msgstr "" "Project-Id-Version: netspeed\n" "Report-Msgid-Bugs-To: http://bugzilla.gnome.org/enter_bug.cgi?product=netspeed&component=general\n" "POT-Creation-Date: 2009-11-05 22:38+0000\n" "PO-Revision-Date: 2010-05-08 11:48+0100\n" "Last-Translator: Matej Urbančič \n" "Language-Team: Slovenian GNOME Translation Team \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=4; plural=(n%100==1 ? 1 : n%100==2 ? 2 : n%100==3 || n%100==4 ? 3 : 0);\n" "X-Launchpad-Export-Date: 2007-10-05 05:48+0000\n" "X-Generator: Launchpad (build Unknown)\n" "X-Poedit-Country: SLOVENIA\n" "X-Poedit-Language: Slovenian\n" "X-Poedit-SourceCharset: utf-8\n" #: ../GNOME_NetspeedApplet.server.in.in.h:1 msgid "Internet" msgstr "Medmrežje" #: ../GNOME_NetspeedApplet.server.in.in.h:2 msgid "Netspeed Applet" msgstr "Aplet Netspeed" #: ../GNOME_NetspeedApplet.server.in.in.h:3 msgid "Netspeed Applet Factory" msgstr "Tovarna apleta Netspeed" #: ../GNOME_NetspeedApplet.server.in.in.h:4 msgid "Network Monitor" msgstr "Nadzornik omrežja" #: ../src/netspeed.c:407 msgid "b/s" msgstr "b/s" #: ../src/netspeed.c:407 msgid "B/s" msgstr "B/s" #: ../src/netspeed.c:409 msgid "bits" msgstr "biti" #: ../src/netspeed.c:409 msgid "bytes" msgstr "bajti" #: ../src/netspeed.c:416 msgid "kb/s" msgstr "kb/s" #: ../src/netspeed.c:416 msgid "KiB/s" msgstr "KiB/s" #: ../src/netspeed.c:418 msgid "kb" msgstr "kb" #: ../src/netspeed.c:418 msgid "KiB" msgstr "KiB" #: ../src/netspeed.c:427 msgid "Mb/s" msgstr "Mb/s" #: ../src/netspeed.c:427 msgid "MiB/s" msgstr "MiB/s" #: ../src/netspeed.c:429 msgid "Mb" msgstr "Mb" #: ../src/netspeed.c:429 msgid "MiB" msgstr "MiB" #: ../src/netspeed.c:755 #, c-format msgid "" "There was an error displaying help:\n" "%s" msgstr "" "Prišlo je do napake med prikazovanjem pomoči:\n" "%s" #: ../src/netspeed.c:806 #, c-format msgid "" "Failed to show:\n" "%s" msgstr "" "Napaka med prikazovanjem:\n" "%s" #: ../src/netspeed.c:837 msgid "A little applet that displays some information on the traffic on the specified network device" msgstr "Aplet, ki prikazuje podrobnosti o prometu na izbrani omrežni napravi" #: ../src/netspeed.c:840 msgid "translator-credits" msgstr "Matej Urbančič" #: ../src/netspeed.c:842 msgid "Netspeed Website" msgstr "Spletišče Netspeed" #: ../src/netspeed.c:968 msgid "Netspeed Preferences" msgstr "Možnosti Netspeed" #: ../src/netspeed.c:991 msgid "General Settings" msgstr "Splošne nastavitve" #: ../src/netspeed.c:1012 msgid "Network _device:" msgstr "Omrežna _naprava:" #. Default means device with default route set #: ../src/netspeed.c:1023 msgid "Default" msgstr "Privzeto" #: ../src/netspeed.c:1036 msgid "Show _sum instead of in & out" msgstr "Pokaži _seštevek namesto poslanega in prejetega" #: ../src/netspeed.c:1040 msgid "Show _bits instead of bytes" msgstr "Pokaži v _bitih namesto v bajtih." #: ../src/netspeed.c:1044 msgid "Change _icon according to the selected device" msgstr "Spremeni _ikono glede na izbrano napravo" #: ../src/netspeed.c:1155 #, c-format msgid "Device Details for %s" msgstr "Podrobnosti naprave %s" #: ../src/netspeed.c:1181 msgid "_In graph color" msgstr "Barva grafa p_rejemanja" #: ../src/netspeed.c:1182 msgid "_Out graph color" msgstr "Barva grafa _pošiljanja" #: ../src/netspeed.c:1198 msgid "Internet Address:" msgstr "Spletni naslov:" #: ../src/netspeed.c:1199 msgid "Netmask:" msgstr "Omrežna maska:" #: ../src/netspeed.c:1200 msgid "Hardware Address:" msgstr "Naslov strojne opreme:" #: ../src/netspeed.c:1201 msgid "P-t-P Address:" msgstr "PTP naslov:" #: ../src/netspeed.c:1202 msgid "Bytes in:" msgstr "Prejeto bajtov:" #: ../src/netspeed.c:1203 msgid "Bytes out:" msgstr "Poslano bajtov:" #: ../src/netspeed.c:1205 #: ../src/netspeed.c:1206 #: ../src/netspeed.c:1207 #: ../src/netspeed.c:1208 msgid "none" msgstr "noben" #: ../src/netspeed.c:1247 msgid "IPv6 Address:" msgstr "IPv6 naslov:" #: ../src/netspeed.c:1279 msgid "Signal Strength:" msgstr "Moč signala:" #: ../src/netspeed.c:1280 msgid "ESSID:" msgstr "ESSID:" #: ../src/netspeed.c:1366 #, c-format msgid "Do you want to disconnect %s now?" msgstr "Ali želite takoj prekiniti povezavo z %s?" #: ../src/netspeed.c:1370 #, c-format msgid "Do you want to connect %s now?" msgstr "Ali želite takoj vzpostaviti povezavo z %s?" #: ../src/netspeed.c:1444 #, c-format msgid "%s is down" msgstr "%s ne deluje" #: ../src/netspeed.c:1449 #, c-format msgid "" "%s: %s\n" "in: %s out: %s" msgstr "" "%s: %s\n" "prejeto: %s poslano: %s" #: ../src/netspeed.c:1451 #: ../src/netspeed.c:1460 msgid "has no ip" msgstr "je brez ip" #: ../src/netspeed.c:1458 #, c-format msgid "" "%s: %s\n" "sum: %s" msgstr "" "%s: %s\n" "skupaj: %s" #: ../src/netspeed.c:1467 #, c-format msgid "" "\n" "ESSID: %s\n" "Strength: %d %%" msgstr "" "\n" "ESSID: %s\n" "Moč: %d %%" #: ../src/netspeed.c:1468 msgid "unknown" msgstr "neznano" #: ../src/netspeed.c:1515 msgid "Netspeed" msgstr "Netspeed" #: ../src/netspeed.c:1683 msgid "Device _Details" msgstr "Podrobnosti _naprave" #: ../src/netspeed.c:1683 msgid "_Preferences..." msgstr "_Možnosti ..." #: ../src/netspeed.c:1683 msgid "_Help" msgstr "Pomo_č" #: ../src/netspeed.c:1683 msgid "_About..." msgstr "_O Programu ..." netspeed_applet-0.16/po/POTFILES.skip0000644000175000017500000000003711402426203014262 00000000000000GNOME_NetspeedApplet.server.in netspeed_applet-0.16/po/gu.po0000644000175000017500000001440011402426203013117 00000000000000# translation of netspeed.po.master.gu.po to Gujarati # Gujarati translation of netspeed. # Copyright (C) 2009 netspeed's COPYRIGHT HOLDER # This file is distributed under the same license as the netspeed package. # # Sweta Kothari , 2009. msgid "" msgstr "" "Project-Id-Version: netspeed.po.master.gu\n" "Report-Msgid-Bugs-To: http://bugzilla.gnome.org/enter_bug.cgi?product=netspeed&component=general\n" "POT-Creation-Date: 2009-05-08 08:33+0000\n" "PO-Revision-Date: 2009-06-03 11:54+0530\n" "Last-Translator: Sweta Kothari \n" "Language-Team: Gujarati\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.11.4\n" "Plural-Forms: nplurals=2; plural=(n!=1);\n" #: ../GNOME_NetspeedApplet.server.in.in.h:1 msgid "Internet" msgstr "ઇન્ટરનેટ" #: ../GNOME_NetspeedApplet.server.in.in.h:2 msgid "Netspeed Applet" msgstr "Netspeed એપલેટ" #: ../GNOME_NetspeedApplet.server.in.in.h:3 msgid "Netspeed Applet Factory" msgstr "Netspeed એપલેટ ફેક્ટરી" #: ../GNOME_NetspeedApplet.server.in.in.h:4 msgid "Network Monitor" msgstr "નેટવર્ક મોનિટર" #: ../src/netspeed.c:407 msgid "b/s" msgstr "b/s" #: ../src/netspeed.c:407 msgid "B/s" msgstr "B/s" #: ../src/netspeed.c:409 msgid "bits" msgstr "બીટો" #: ../src/netspeed.c:409 msgid "bytes" msgstr "બાઇટો" #: ../src/netspeed.c:416 msgid "kb/s" msgstr "kb/s" #: ../src/netspeed.c:416 msgid "KiB/s" msgstr "KiB/s" #: ../src/netspeed.c:418 msgid "kb" msgstr "kb" #: ../src/netspeed.c:418 msgid "KiB" msgstr "KiB" #: ../src/netspeed.c:427 msgid "Mb/s" msgstr "Mb/s" #: ../src/netspeed.c:427 msgid "MiB/s" msgstr "MiB/s" #: ../src/netspeed.c:429 msgid "Mb" msgstr "Mb" #: ../src/netspeed.c:429 msgid "MiB" msgstr "MiB" #: ../src/netspeed.c:755 #, c-format msgid "" "There was an error displaying help:\n" "%s" msgstr "" "મદદને દર્શાવતી વખતે ભૂલ હતી:\n" "%s" #: ../src/netspeed.c:806 #, c-format msgid "" "Failed to show:\n" "%s" msgstr "" "બતાવવાનું નિષ્ફળ:\n" "%s" #: ../src/netspeed.c:837 msgid "" "A little applet that displays some information on the traffic on the " "specified network device" msgstr "નાની એપલેટ કે જે સ્પષ્ટ થયેલ નેટવર્ક ઉપકરણ પર ટ્રાફિક પર અમુક જાણકારીને દર્શાવે છે" #: ../src/netspeed.c:840 msgid "translator-credits" msgstr "શ્ર્વેતા કોઠારી " #: ../src/netspeed.c:842 msgid "Netspeed Website" msgstr "Netspeed વેબસાઇટ" #: ../src/netspeed.c:968 msgid "Netspeed Preferences" msgstr "Netspeed પસંદગીઓ" #: ../src/netspeed.c:991 msgid "General Settings" msgstr "સામાન્ય સુયોજનો" #: ../src/netspeed.c:1012 msgid "Network _device:" msgstr "નેટવર્ક ઉપકરણ (_d):" #. Default means device with default route set #: ../src/netspeed.c:1023 msgid "Default" msgstr "મૂળભૂત" #: ../src/netspeed.c:1036 msgid "Show _sum instead of in & out" msgstr "તેમાં અને તેની બહારની બદલે સરવાળાને બતાવો (_s)" #: ../src/netspeed.c:1040 msgid "Show _bits instead of bytes" msgstr "બાઇટોને બદલે બીટોને બતાવો (_b)" #: ../src/netspeed.c:1044 msgid "Change _icon according to the selected device" msgstr "પસંદ થયેલ ઉપકરણ ને અનુસાર ચિહ્નને બતાવો (_i)" #: ../src/netspeed.c:1155 #, c-format msgid "Device Details for %s" msgstr "%s માટે ઉપકરણ વિગતો" #: ../src/netspeed.c:1181 msgid "_In graph color" msgstr "આલેખ રંગમાં (_I)" #: ../src/netspeed.c:1182 msgid "_Out graph color" msgstr "આલેખ રંગની બહાર (_O)" #: ../src/netspeed.c:1198 msgid "Internet Address:" msgstr "ઇન્ટરનેટ સરનામું:" #: ../src/netspeed.c:1199 msgid "Netmask:" msgstr "નેટમાસ્ક:" #: ../src/netspeed.c:1200 msgid "Hardware Address:" msgstr "હાર્ડવેર સરનામું:" #: ../src/netspeed.c:1201 msgid "P-t-P Address:" msgstr "P-t-P સરનામું:" #: ../src/netspeed.c:1202 msgid "Bytes in:" msgstr "બાઇટોમાં:" #: ../src/netspeed.c:1203 msgid "Bytes out:" msgstr "બાઇટોની બહાર:" #: ../src/netspeed.c:1205 ../src/netspeed.c:1206 ../src/netspeed.c:1207 #: ../src/netspeed.c:1208 msgid "none" msgstr "કંઇ નહિં" #: ../src/netspeed.c:1247 msgid "IPv6 Address:" msgstr "IPv6 સરનામું:" #: ../src/netspeed.c:1279 msgid "Signal Strength:" msgstr "સંકેત શક્તિ:" #: ../src/netspeed.c:1280 msgid "ESSID:" msgstr "ESSID:" #: ../src/netspeed.c:1366 #, c-format msgid "Do you want to disconnect %s now?" msgstr "શું તમે હવે %s ને જોડવા માંગતા નથી?" #: ../src/netspeed.c:1370 #, c-format msgid "Do you want to connect %s now?" msgstr "શું તમે %s ને જોડવા માંગો છો?" #: ../src/netspeed.c:1444 #, c-format msgid "%s is down" msgstr "%s એ નીચુ છે" #: ../src/netspeed.c:1449 #, c-format msgid "" "%s: %s\n" "in: %s out: %s" msgstr "" "%s: %s\n" "માં: %s બહાર: %s" #: ../src/netspeed.c:1451 ../src/netspeed.c:1460 msgid "has no ip" msgstr "તેની પાસે ip નથી" #: ../src/netspeed.c:1458 #, c-format msgid "" "%s: %s\n" "sum: %s" msgstr "" "%s: %s\n" "સરવાળો: %s" #: ../src/netspeed.c:1467 #, c-format msgid "" "\n" "ESSID: %s\n" "Strength: %d %%" msgstr "" "\n" "ESSID: %s\n" "શક્તિ: %d %%" #: ../src/netspeed.c:1468 msgid "unknown" msgstr "અજ્ઞાત" #: ../src/netspeed.c:1515 msgid "Netspeed" msgstr "Netspeed" #: ../src/netspeed.c:1683 msgid "Device _Details" msgstr "ઉપકરણ વિગતો (_D)" #: ../src/netspeed.c:1683 msgid "_Preferences..." msgstr "પસંદગીઓ (_P)..." #: ../src/netspeed.c:1683 msgid "_Help" msgstr "મદદ (_H)" #: ../src/netspeed.c:1683 msgid "_About..." msgstr "વિશે (_A)..." netspeed_applet-0.16/po/Makefile.in.in0000644000175000017500000001537711402461230014633 00000000000000# Makefile for program source directory in GNU NLS utilities package. # Copyright (C) 1995, 1996, 1997 by Ulrich Drepper # Copyright (C) 2004-2008 Rodney Dawes # # This file may be copied and used freely without restrictions. It may # be used in projects which are not available under a GNU Public License, # but which still want to provide support for the GNU gettext functionality. # # - Modified by Owen Taylor to use GETTEXT_PACKAGE # instead of PACKAGE and to look for po2tbl in ./ not in intl/ # # - Modified by jacob berkman to install # Makefile.in.in and po2tbl.sed.in for use with glib-gettextize # # - Modified by Rodney Dawes for use with intltool # # We have the following line for use by intltoolize: # INTLTOOL_MAKEFILE GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ PACKAGE = @PACKAGE@ VERSION = @VERSION@ SHELL = @SHELL@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ top_builddir = @top_builddir@ VPATH = @srcdir@ prefix = @prefix@ exec_prefix = @exec_prefix@ datadir = @datadir@ datarootdir = @datarootdir@ libdir = @libdir@ DATADIRNAME = @DATADIRNAME@ itlocaledir = $(prefix)/$(DATADIRNAME)/locale subdir = po install_sh = @install_sh@ # Automake >= 1.8 provides @mkdir_p@. # Until it can be supposed, use the safe fallback: mkdir_p = $(install_sh) -d INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ GMSGFMT = @GMSGFMT@ MSGFMT = @MSGFMT@ XGETTEXT = @XGETTEXT@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ MSGMERGE = INTLTOOL_EXTRACT=$(INTLTOOL_EXTRACT) srcdir=$(srcdir) $(INTLTOOL_UPDATE) --gettext-package $(GETTEXT_PACKAGE) --dist GENPOT = INTLTOOL_EXTRACT=$(INTLTOOL_EXTRACT) srcdir=$(srcdir) $(INTLTOOL_UPDATE) --gettext-package $(GETTEXT_PACKAGE) --pot ALL_LINGUAS = @ALL_LINGUAS@ PO_LINGUAS=$(shell if test -r $(srcdir)/LINGUAS; then grep -v "^\#" $(srcdir)/LINGUAS; else echo "$(ALL_LINGUAS)"; fi) USER_LINGUAS=$(shell if test -n "$(LINGUAS)"; then LLINGUAS="$(LINGUAS)"; ALINGUAS="$(ALL_LINGUAS)"; for lang in $$LLINGUAS; do if test -n "`grep \^$$lang$$ $(srcdir)/LINGUAS 2>/dev/null`" -o -n "`echo $$ALINGUAS|tr ' ' '\n'|grep \^$$lang$$`"; then printf "$$lang "; fi; done; fi) USE_LINGUAS=$(shell if test -n "$(USER_LINGUAS)" -o -n "$(LINGUAS)"; then LLINGUAS="$(USER_LINGUAS)"; else if test -n "$(PO_LINGUAS)"; then LLINGUAS="$(PO_LINGUAS)"; else LLINGUAS="$(ALL_LINGUAS)"; fi; fi; for lang in $$LLINGUAS; do printf "$$lang "; done) POFILES=$(shell LINGUAS="$(PO_LINGUAS)"; for lang in $$LINGUAS; do printf "$$lang.po "; done) DISTFILES = Makefile.in.in POTFILES.in $(POFILES) EXTRA_DISTFILES = ChangeLog POTFILES.skip Makevars LINGUAS POTFILES = \ # This comment gets stripped out CATALOGS=$(shell LINGUAS="$(USE_LINGUAS)"; for lang in $$LINGUAS; do printf "$$lang.gmo "; done) .SUFFIXES: .SUFFIXES: .po .pox .gmo .mo .msg .cat .po.pox: $(MAKE) $(GETTEXT_PACKAGE).pot $(MSGMERGE) $< $(GETTEXT_PACKAGE).pot -o $*.pox .po.mo: $(MSGFMT) -o $@ $< .po.gmo: file=`echo $* | sed 's,.*/,,'`.gmo \ && rm -f $$file && $(GMSGFMT) -o $$file $< .po.cat: sed -f ../intl/po2msg.sed < $< > $*.msg \ && rm -f $@ && gencat $@ $*.msg all: all-@USE_NLS@ all-yes: $(CATALOGS) all-no: $(GETTEXT_PACKAGE).pot: $(POTFILES) $(GENPOT) install: install-data install-data: install-data-@USE_NLS@ install-data-no: all install-data-yes: all linguas="$(USE_LINGUAS)"; \ for lang in $$linguas; do \ dir=$(DESTDIR)$(itlocaledir)/$$lang/LC_MESSAGES; \ $(mkdir_p) $$dir; \ if test -r $$lang.gmo; then \ $(INSTALL_DATA) $$lang.gmo $$dir/$(GETTEXT_PACKAGE).mo; \ echo "installing $$lang.gmo as $$dir/$(GETTEXT_PACKAGE).mo"; \ else \ $(INSTALL_DATA) $(srcdir)/$$lang.gmo $$dir/$(GETTEXT_PACKAGE).mo; \ echo "installing $(srcdir)/$$lang.gmo as" \ "$$dir/$(GETTEXT_PACKAGE).mo"; \ fi; \ if test -r $$lang.gmo.m; then \ $(INSTALL_DATA) $$lang.gmo.m $$dir/$(GETTEXT_PACKAGE).mo.m; \ echo "installing $$lang.gmo.m as $$dir/$(GETTEXT_PACKAGE).mo.m"; \ else \ if test -r $(srcdir)/$$lang.gmo.m ; then \ $(INSTALL_DATA) $(srcdir)/$$lang.gmo.m \ $$dir/$(GETTEXT_PACKAGE).mo.m; \ echo "installing $(srcdir)/$$lang.gmo.m as" \ "$$dir/$(GETTEXT_PACKAGE).mo.m"; \ else \ true; \ fi; \ fi; \ done # Empty stubs to satisfy archaic automake needs dvi info ctags tags CTAGS TAGS ID: # Define this as empty until I found a useful application. install-exec installcheck: uninstall: linguas="$(USE_LINGUAS)"; \ for lang in $$linguas; do \ rm -f $(DESTDIR)$(itlocaledir)/$$lang/LC_MESSAGES/$(GETTEXT_PACKAGE).mo; \ rm -f $(DESTDIR)$(itlocaledir)/$$lang/LC_MESSAGES/$(GETTEXT_PACKAGE).mo.m; \ done check: all $(GETTEXT_PACKAGE).pot rm -f missing notexist srcdir=$(srcdir) $(INTLTOOL_UPDATE) -m if [ -r missing -o -r notexist ]; then \ exit 1; \ fi mostlyclean: rm -f *.pox $(GETTEXT_PACKAGE).pot *.old.po cat-id-tbl.tmp rm -f .intltool-merge-cache clean: mostlyclean distclean: clean rm -f Makefile Makefile.in POTFILES stamp-it rm -f *.mo *.msg *.cat *.cat.m *.gmo maintainer-clean: distclean @echo "This command is intended for maintainers to use;" @echo "it deletes files that may require special tools to rebuild." rm -f Makefile.in.in distdir = ../$(PACKAGE)-$(VERSION)/$(subdir) dist distdir: $(DISTFILES) dists="$(DISTFILES)"; \ extra_dists="$(EXTRA_DISTFILES)"; \ for file in $$extra_dists; do \ test -f $(srcdir)/$$file && dists="$$dists $(srcdir)/$$file"; \ done; \ for file in $$dists; do \ test -f $$file || file="$(srcdir)/$$file"; \ ln $$file $(distdir) 2> /dev/null \ || cp -p $$file $(distdir); \ done update-po: Makefile $(MAKE) $(GETTEXT_PACKAGE).pot tmpdir=`pwd`; \ linguas="$(USE_LINGUAS)"; \ for lang in $$linguas; do \ echo "$$lang:"; \ result="`$(MSGMERGE) -o $$tmpdir/$$lang.new.po $$lang`"; \ if $$result; then \ if cmp $(srcdir)/$$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \ rm -f $$tmpdir/$$lang.new.po; \ else \ if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \ :; \ else \ echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \ rm -f $$tmpdir/$$lang.new.po; \ exit 1; \ fi; \ fi; \ else \ echo "msgmerge for $$lang.gmo failed!"; \ rm -f $$tmpdir/$$lang.new.po; \ fi; \ done Makefile POTFILES: stamp-it @if test ! -f $@; then \ rm -f stamp-it; \ $(MAKE) stamp-it; \ fi stamp-it: Makefile.in.in $(top_builddir)/config.status POTFILES.in cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/Makefile.in CONFIG_HEADERS= CONFIG_LINKS= \ $(SHELL) ./config.status # Tell versions [3.59,3.63) of GNU make not to export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: netspeed_applet-0.16/po/es.po0000644000175000017500000001352711402426203013124 00000000000000# translation of netspeed.HEAD.po to Español # Héctor Enríquez Díaz 2005. # # Ramón Rey Vicente , 2003. # Daniel Mustieles , 2008. # Jorge González , 2008. # Daniel Mustieles , 2009. msgid "" msgstr "" "Project-Id-Version: netspeed.HEAD\n" "Report-Msgid-Bugs-To: http://bugzilla.gnome.org/enter_bug.cgi?" "product=netspeed&component=general\n" "POT-Creation-Date: 2009-04-29 18:04+0000\n" "PO-Revision-Date: 2009-05-01 12:17+0200\n" "Last-Translator: Daniel Mustieles \n" "Language-Team: Español \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" #: ../GNOME_NetspeedApplet.server.in.in.h:1 msgid "Internet" msgstr "Internet" #: ../GNOME_NetspeedApplet.server.in.in.h:2 msgid "Netspeed Applet" msgstr "Miniaplicación Netspeed" #: ../GNOME_NetspeedApplet.server.in.in.h:3 msgid "Netspeed Applet Factory" msgstr "Fábrica de miniaplicaciones Netspeed" #: ../GNOME_NetspeedApplet.server.in.in.h:4 msgid "Network Monitor" msgstr "Monitor de la red" #: ../src/netspeed.c:407 msgid "b/s" msgstr "b/s" #: ../src/netspeed.c:407 msgid "B/s" msgstr "B/s" #: ../src/netspeed.c:409 msgid "bits" msgstr "bits" #: ../src/netspeed.c:409 msgid "bytes" msgstr "bytes" #: ../src/netspeed.c:416 msgid "kb/s" msgstr "kb/s" #: ../src/netspeed.c:416 msgid "KiB/s" msgstr "KiB/s" #: ../src/netspeed.c:418 msgid "kb" msgstr "kb" #: ../src/netspeed.c:418 msgid "KiB" msgstr "KiB" #: ../src/netspeed.c:427 msgid "Mb/s" msgstr "Mb/s" #: ../src/netspeed.c:427 msgid "MiB/s" msgstr "MiB/s" #: ../src/netspeed.c:429 msgid "Mb" msgstr "Mb" #: ../src/netspeed.c:429 msgid "MiB" msgstr "MiB" #: ../src/netspeed.c:755 #, c-format msgid "" "There was an error displaying help:\n" "%s" msgstr "" "Hubo un error al mostrar la ayuda:\n" "%s" #: ../src/netspeed.c:806 #, c-format msgid "" "Failed to show:\n" "%s" msgstr "" "Falló al mostrar:\n" "%s" #: ../src/netspeed.c:837 msgid "" "A little applet that displays some information on the traffic on the " "specified network device" msgstr "" "Una mini aplicación que muestra alguna información del tráfico en el " "dispositivo de red especificado" #: ../src/netspeed.c:840 msgid "translator-credits" msgstr "" "Daniel Mustieles , 2008\n" "Francisco Javier F. Serrador , 2006\n" "Héctor Enríquez Díaz , 2005\n" "Ramón Rey Vicente , 2003\n" "QA: Jorge González , 2008" #: ../src/netspeed.c:842 msgid "Netspeed Website" msgstr "Sitio de web de Netspeed" #: ../src/netspeed.c:968 msgid "Netspeed Preferences" msgstr "Preferencias de Netspeed" #: ../src/netspeed.c:991 msgid "General Settings" msgstr "Configuración general" #: ../src/netspeed.c:1012 msgid "Network _device:" msgstr "Dispositivo de _red:" #. Default means device with default route set #: ../src/netspeed.c:1023 msgid "Default" msgstr "Predeterminado" #: ../src/netspeed.c:1036 msgid "Show _sum instead of in & out" msgstr "Mostrar el _total en lugar de bajada y subida" #: ../src/netspeed.c:1040 msgid "Show _bits instead of bytes" msgstr "Mostrar _bits en lugar de bytes" #: ../src/netspeed.c:1044 msgid "Change _icon according to the selected device" msgstr "Cambiar _icono según el dispositivo seleccionado" #: ../src/netspeed.c:1155 #, c-format msgid "Device Details for %s" msgstr "Detalles del dispositivo %s" #: ../src/netspeed.c:1181 msgid "_In graph color" msgstr "Color del gráfico de _bajada" #: ../src/netspeed.c:1182 msgid "_Out graph color" msgstr "Color del gráfico de _subida" #: ../src/netspeed.c:1198 msgid "Internet Address:" msgstr "Dirección de internet:" #: ../src/netspeed.c:1199 msgid "Netmask:" msgstr "Máscara de red:" #: ../src/netspeed.c:1200 msgid "Hardware Address:" msgstr "Dirección del hardware:" #: ../src/netspeed.c:1201 msgid "P-t-P Address:" msgstr "Dirección P-a-P:" #: ../src/netspeed.c:1202 msgid "Bytes in:" msgstr "Bytes de bajada:" #: ../src/netspeed.c:1203 msgid "Bytes out:" msgstr "Bytes de subida:" #: ../src/netspeed.c:1205 ../src/netspeed.c:1206 ../src/netspeed.c:1207 #: ../src/netspeed.c:1208 msgid "none" msgstr "ninguno" #: ../src/netspeed.c:1247 msgid "IPv6 Address:" msgstr "Dirección IPv6:" #: ../src/netspeed.c:1279 msgid "Signal Strength:" msgstr "Potencia de la señal:" #: ../src/netspeed.c:1280 msgid "ESSID:" msgstr "ESSID:" #: ../src/netspeed.c:1366 #, c-format msgid "Do you want to disconnect %s now?" msgstr "¿Quiere desconectar %s ahora?" #: ../src/netspeed.c:1370 #, c-format msgid "Do you want to connect %s now?" msgstr "¿Quiere conectar %s ahora?" #: ../src/netspeed.c:1444 #, c-format msgid "%s is down" msgstr "%s está desconfigurado" #: ../src/netspeed.c:1449 #, c-format msgid "" "%s: %s\n" "in: %s out: %s" msgstr "" "%s :%s\n" "bajada: %s subida: %s" #: ../src/netspeed.c:1451 ../src/netspeed.c:1460 msgid "has no ip" msgstr "no tiene IP" #: ../src/netspeed.c:1458 #, c-format msgid "" "%s: %s\n" "sum: %s" msgstr "" "%s: %s\n" "total: %s" #: ../src/netspeed.c:1467 #, c-format msgid "" "\n" "ESSID: %s\n" "Strength: %d %%" msgstr "" "\n" "ESSID: %s\n" "Potencia: %d %%" #: ../src/netspeed.c:1468 msgid "unknown" msgstr "desconocido" #: ../src/netspeed.c:1515 msgid "Netspeed" msgstr "Velocidad de la red" #: ../src/netspeed.c:1683 msgid "Device _Details" msgstr "_Detalles del dispositivo" #: ../src/netspeed.c:1683 msgid "_Preferences..." msgstr "Prefere_ncias…" #: ../src/netspeed.c:1683 msgid "_Help" msgstr "Ay_uda" #: ../src/netspeed.c:1683 msgid "_About..." msgstr "Acerca _de…" #~ msgid "_Always monitor a connected device, if possible" #~ msgstr "Monitorizar _siempre un dispositivo conectado si es posible" netspeed_applet-0.16/po/et.po0000644000175000017500000000706411402426203013124 00000000000000# netspeed rakendi eesti tõlge. # Copyright (C) 2002, 2003, 2009 Free Software Foundation, Inc. # # Tõivo Leedjärv , 2002, 2003. # Mattias Põldaru , 2009. # msgid "" msgstr "" "Project-Id-Version: netspeed_applet\n" "Report-Msgid-Bugs-To: http://bugzilla.gnome.org/enter_bug.cgi?" "product=netspeed&component=general\n" "POT-Creation-Date: 2009-06-14 15:05+0000\n" "PO-Revision-Date: 2009-07-31 13:20+0300\n" "Last-Translator: Mattias Põldaru \n" "Language-Team: Estonian \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" msgid "Internet" msgstr "Internet" msgid "Netspeed Applet" msgstr "Netspeed rakend" msgid "Netspeed Applet Factory" msgstr "Netspeed Applet Factory" msgid "Network Monitor" msgstr "Võrgumonitor" msgid "b/s" msgstr "b/s" msgid "B/s" msgstr "B/s" msgid "bits" msgstr "bitti" msgid "bytes" msgstr "baiti" msgid "kb/s" msgstr "kb/s" msgid "KiB/s" msgstr "KB/s" msgid "kb" msgstr "kb" msgid "KiB" msgstr "KB" msgid "Mb/s" msgstr "Mb/s" msgid "MiB/s" msgstr "MB/s" msgid "Mb" msgstr "Mb" msgid "MiB" msgstr "MB" #, c-format msgid "" "There was an error displaying help:\n" "%s" msgstr "" "Abiteabe kuvamisel esines viga:\n" "%s" #, c-format msgid "" "Failed to show:\n" "%s" msgstr "" "Kuvamine nurjus:\n" "%s" msgid "" "A little applet that displays some information on the traffic on the " "specified network device" msgstr "" "Väike rakend, mis kuvab infot valitud võrguliidesel toimuva liikluse kohta." msgid "translator-credits" msgstr "Mattias Põldaru , 2009." msgid "Netspeed Website" msgstr "Netspeedi veebileht" msgid "Netspeed Preferences" msgstr "Netspeedi häälestus" msgid "General Settings" msgstr "Üldised sätted" msgid "Network _device:" msgstr "Võrgu_liides:" #. Default means device with default route set msgid "Default" msgstr "Vaikimisi" msgid "Show _sum instead of in & out" msgstr "Näita _kogumahtu sisse/välja asemel" msgid "Show _bits instead of bytes" msgstr "_Bittide asemel kuvatakse baitides" msgid "Change _icon according to the selected device" msgstr "_Ikoon vastavalt valitud liidesele" #, c-format msgid "Device Details for %s" msgstr "Liidese %s info" msgid "_In graph color" msgstr "_Sisse graafiku värv" msgid "_Out graph color" msgstr "_Välja graafiku värv" msgid "Internet Address:" msgstr "Internetiaadress:" msgid "Netmask:" msgstr "Võrgumask:" msgid "Hardware Address:" msgstr "Riistvaraline aadress:" msgid "P-t-P Address:" msgstr "Kakspunktaadress:" msgid "Bytes in:" msgstr "Baite sisse:" msgid "Bytes out:" msgstr "Baite välja:" msgid "none" msgstr "pole" msgid "IPv6 Address:" msgstr "IPv6 aadress:" msgid "Signal Strength:" msgstr "Signaali tugevus:" msgid "ESSID:" msgstr "ESSID:" #, c-format msgid "Do you want to disconnect %s now?" msgstr "Kas katkestada ühendus %s?" #, c-format msgid "Do you want to connect %s now?" msgstr "Kas ühendada %s?" #, c-format msgid "%s is down" msgstr "%s on väljas" #, c-format msgid "" "%s: %s\n" "in: %s out: %s" msgstr "" "%s: %s\n" "sisse: %s välja: %s" msgid "has no ip" msgstr "ei ole ip-d" #, c-format msgid "" "%s: %s\n" "sum: %s" msgstr "" "%s: %s\n" "kokku: %s" #, c-format msgid "" "\n" "ESSID: %s\n" "Strength: %d %%" msgstr "" "\n" "ESSID: %s\n" "Tugevus: %d %%" msgid "unknown" msgstr "tundmatu" msgid "Netspeed" msgstr "Netspeed" msgid "Device _Details" msgstr "Liidese _info" msgid "_Preferences..." msgstr "_Häälestus..." msgid "_Help" msgstr "_Abi" msgid "_About..." msgstr "_Lähemalt..." netspeed_applet-0.16/po/de.po0000644000175000017500000001325211402426203013100 00000000000000# translation of netspeed_applet. # Copyright (C) 2002 Free Software Foundation, Inc. # Jörgen Scheibengruber , 2002. # Hendrik Richter , 2005. # Andre Klapper , 2008. # Mario Blättermann , 2008, 2009. # msgid "" msgstr "" "Project-Id-Version: netspeed_applet 0.2\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2009-04-29 20:01+0200\n" "PO-Revision-Date: 2009-04-29 20:02+0100\n" "Last-Translator: Mario Blättermann \n" "Language-Team: German \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #: ../GNOME_NetspeedApplet.server.in.in.h:1 msgid "Internet" msgstr "Internet" #: ../GNOME_NetspeedApplet.server.in.in.h:2 msgid "Netspeed Applet" msgstr "Netzwerkmonitor Applet" #: ../GNOME_NetspeedApplet.server.in.in.h:3 msgid "Netspeed Applet Factory" msgstr "Netzwerkmonitor Applet Factory" #: ../GNOME_NetspeedApplet.server.in.in.h:4 msgid "Network Monitor" msgstr "Netzwerkmonitor" #: ../src/netspeed.c:407 msgid "b/s" msgstr "b/s" #: ../src/netspeed.c:407 msgid "B/s" msgstr "B/s" #: ../src/netspeed.c:409 msgid "bits" msgstr "Bit" #: ../src/netspeed.c:409 msgid "bytes" msgstr "Byte" #: ../src/netspeed.c:416 msgid "kb/s" msgstr "kb/s" #: ../src/netspeed.c:416 msgid "KiB/s" msgstr "KB/s" #: ../src/netspeed.c:418 msgid "kb" msgstr "kb" #: ../src/netspeed.c:418 msgid "KiB" msgstr "KB" #: ../src/netspeed.c:427 msgid "Mb/s" msgstr "Mb/s" #: ../src/netspeed.c:427 msgid "MiB/s" msgstr "MB/s" #: ../src/netspeed.c:429 msgid "Mb" msgstr "Mb" #: ../src/netspeed.c:429 msgid "MiB" msgstr "MB" #: ../src/netspeed.c:755 #, c-format msgid "" "There was an error displaying help:\n" "%s" msgstr "" "Die Hilfeseiten konnten nicht gefunden werden:\n" "%s" #: ../src/netspeed.c:806 #, c-format msgid "" "Failed to show:\n" "%s" msgstr "" "Anzeigen fehlgeschlagen:\n" "%s" #: ../src/netspeed.c:837 msgid "" "A little applet that displays some information on the traffic on the " "specified network device" msgstr "" "Ein kleines Applet, welches Informationen zum Verkehr auf einem angegebenen " "Netzwerkgerät anzeigt" #: ../src/netspeed.c:840 msgid "translator-credits" msgstr "" "Jörgen Scheibengruber \n" "Hendrik Richter \n" "Andre Klapper \n" "Mario Blättermann " #: ../src/netspeed.c:842 msgid "Netspeed Website" msgstr "Netzwerkmonitor Webseite" #: ../src/netspeed.c:968 msgid "Netspeed Preferences" msgstr "Netzwerkmonitor Einstellungen" #: ../src/netspeed.c:991 msgid "General Settings" msgstr "Allgemeine Einstellungen:" #: ../src/netspeed.c:1012 msgid "Network _device:" msgstr "Netzwerk_gerät:" #. Default means device with default route set #: ../src/netspeed.c:1023 msgid "Default" msgstr "Vorgabe" #: ../src/netspeed.c:1036 msgid "Show _sum instead of in & out" msgstr "Zeige die _Summe anstelle von Ankommend und Abgehend" #: ../src/netspeed.c:1040 msgid "Show _bits instead of bytes" msgstr "Zeige _Bits anstelle von Bytes" #: ../src/netspeed.c:1044 msgid "Change _icon according to the selected device" msgstr "Das _Symbol dem ausgewählten Gerät anpassen" #: ../src/netspeed.c:1155 #, c-format msgid "Device Details for %s" msgstr "Gerätedetails von %s" #: ../src/netspeed.c:1181 msgid "_In graph color" msgstr "Graphfarbe an_kommend" #: ../src/netspeed.c:1182 msgid "_Out graph color" msgstr "Graphfarbe ab_gehend" #: ../src/netspeed.c:1198 msgid "Internet Address:" msgstr "Internetadresse:" #: ../src/netspeed.c:1199 msgid "Netmask:" msgstr "Netzmaske:" #: ../src/netspeed.c:1200 msgid "Hardware Address:" msgstr "Hardwareadresse:" #: ../src/netspeed.c:1201 msgid "P-t-P Address:" msgstr "P-t-P-Adresse:" #: ../src/netspeed.c:1202 msgid "Bytes in:" msgstr "Bytes ankommend:" #: ../src/netspeed.c:1203 msgid "Bytes out:" msgstr "Bytes abgehend:" #: ../src/netspeed.c:1205 ../src/netspeed.c:1206 ../src/netspeed.c:1207 #: ../src/netspeed.c:1208 msgid "none" msgstr "keine" #: ../src/netspeed.c:1247 msgid "IPv6 Address:" msgstr "IPv6-Adresse:" #: ../src/netspeed.c:1279 msgid "Signal Strength:" msgstr "Signalstärke:" #: ../src/netspeed.c:1280 msgid "ESSID:" msgstr "ESSID:" #: ../src/netspeed.c:1366 #, c-format msgid "Do you want to disconnect %s now?" msgstr "Soll %s jetzt getrennt werden?" #: ../src/netspeed.c:1370 #, c-format msgid "Do you want to connect %s now?" msgstr "Soll %s jetzt verbunden werden?" #: ../src/netspeed.c:1444 #, c-format msgid "%s is down" msgstr "%s ist nicht verbunden" #: ../src/netspeed.c:1449 #, c-format msgid "" "%s: %s\n" "in: %s out: %s" msgstr "" "%s: %s\n" "Ankommend: %s Abgehend: %s" #: ../src/netspeed.c:1451 ../src/netspeed.c:1460 msgid "has no ip" msgstr "hat keine IP" #: ../src/netspeed.c:1458 #, c-format msgid "" "%s: %s\n" "sum: %s" msgstr "" "%s: %s\n" "Summe: %s" #: ../src/netspeed.c:1467 #, c-format msgid "" "\n" "ESSID: %s\n" "Strength: %d %%" msgstr "" "\n" "ESSID: %s\n" "Stärke: %d %%" #: ../src/netspeed.c:1468 msgid "unknown" msgstr "unbekannt" #: ../src/netspeed.c:1515 msgid "Netspeed" msgstr "Netzwerkmonitor" #: ../src/netspeed.c:1683 msgid "Device _Details" msgstr "Geräte_details" #: ../src/netspeed.c:1683 msgid "_Preferences..." msgstr "_Einstellungen …" #: ../src/netspeed.c:1683 msgid "_Help" msgstr "_Hilfe" #: ../src/netspeed.c:1683 msgid "_About..." msgstr "_Info …" #~ msgid "_Always monitor a connected device, if possible" #~ msgstr "Wenn möglich, immer ein _verbundenes Gerät wählen" #~ msgid "_Update interval:" #~ msgstr "_Aktualisierungsintervall:" #~ msgid "millisecond" #~ msgstr "Millisekunden" #~ msgid "Label _font size:" #~ msgstr "Größe der Beschriftung:" #~ msgid "points" #~ msgstr "Punkte" netspeed_applet-0.16/po/el.po0000644000175000017500000001507511402426203013115 00000000000000# translation of el.po to Greek # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # # Simos Xenitellis , 2008. msgid "" msgstr "" "Project-Id-Version: el\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2008-03-18 11:00+0000\n" "PO-Revision-Date: 2008-03-18 11:06+0000\n" "Last-Translator: Simos Xenitellis \n" "Language-Team: Greek \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" "X-Poedit-Language: Greek\n" "X-Poedit-Country: GREECE\n" "X-Generator: KBabel 1.11.4\n" #: ../GNOME_NetspeedApplet.server.in.in.h:1 msgid "Internet" msgstr "Διαδίκτυο" #: ../GNOME_NetspeedApplet.server.in.in.h:2 msgid "Netspeed Applet" msgstr "Μικροεφαρμογή ταχύτητας δικτύου" #: ../GNOME_NetspeedApplet.server.in.in.h:3 msgid "Netspeed Applet Factory" msgstr "Εργοστάσιο μικροεφαρμογής ταχύτητας δικτύου" #: ../GNOME_NetspeedApplet.server.in.in.h:4 msgid "Network Monitor" msgstr "Παρακολούθηση δικτύου" #: ../src/netspeed.c:400 msgid "b/s" msgstr "b/s" #: ../src/netspeed.c:400 msgid "B/s" msgstr "B/s" #: ../src/netspeed.c:402 msgid "bits" msgstr "bits" #: ../src/netspeed.c:402 msgid "bytes" msgstr "bytes" #: ../src/netspeed.c:409 msgid "kb/s" msgstr "kb/s" #: ../src/netspeed.c:409 msgid "KiB/s" msgstr "KiB/s" #: ../src/netspeed.c:411 msgid "kb" msgstr "kb" #: ../src/netspeed.c:411 msgid "KiB" msgstr "KiB" #: ../src/netspeed.c:420 msgid "Mb/s" msgstr "Mb/s" #: ../src/netspeed.c:420 msgid "MiB/s" msgstr "MiB/s" #: ../src/netspeed.c:422 msgid "Mb" msgstr "Mb" #: ../src/netspeed.c:422 msgid "MiB" msgstr "MiB" #: ../src/netspeed.c:628 #, c-format msgid "" "%s: %s\n" "in: %s out: %s" msgstr "" "%s: %s\n" "εισερχόμενα: %s εξερχόμενα: %s" #: ../src/netspeed.c:630 ../src/netspeed.c:636 msgid "has no ip" msgstr "δεν έχει διεύθυνση IP" #: ../src/netspeed.c:634 #, c-format msgid "" "%s: %s\n" "sum: %s" msgstr "" "%s: %s\n" "Σύνολο: %s" #: ../src/netspeed.c:647 #, c-format msgid "%s is down" msgstr "Το %s είναι κάτω" #: ../src/netspeed.c:657 #, c-format msgid "" "%s\n" "ESSID: %s\n" "Strength: %d %%" msgstr "" "%s\n" "ESSID: %s\n" "Ισχύς: %d %%" #: ../src/netspeed.c:658 msgid "unknown" msgstr "άγνωστο" #: ../src/netspeed.c:769 #, c-format msgid "" "There was an error displaying help:\n" "%s" msgstr "" "Υπήρξε ένα σφάλμα κατά την προβολή της βοήθειας:\n" "%s" #: ../src/netspeed.c:820 #, c-format msgid "" "Failed to show:\n" "%s" msgstr "" "Αποτυχία κατά την προβολή του:\n" "%s" #: ../src/netspeed.c:851 msgid "" "A little applet that displays some information on the traffic on the " "specified network device" msgstr "Μια μικρή εφαρμογή που παρέχει μερικές πληροφορίες για την κυκλοφορία της καθορισμένης συσκευής δικτύου" #: ../src/netspeed.c:854 msgid "translator-credits" msgstr "" "Ελληνική μεταφραστική ομάδα GNOME\n" " Γιάννης Κατσαμπίρης \n" " Σίμος Ξενιτέλλης \n" "\n" "Για περισσότερα δείτε http://www.gnome.gr/" #: ../src/netspeed.c:856 msgid "Netspeed Website" msgstr "Ιστοσελίδα της Ταχύτητας δικτύου" #: ../src/netspeed.c:987 msgid "Netspeed Preferences" msgstr "Προτιμήσεις" #: ../src/netspeed.c:1010 msgid "General Settings" msgstr "Γενικές ρυθμίσεις" #: ../src/netspeed.c:1031 msgid "Network _device:" msgstr "Συ_σκευή δικτύου:" #: ../src/netspeed.c:1052 msgid "Show _sum instead of in & out" msgstr "Εμφάνιση του σ_υνόλου αντί για τα εισερχόμενα και τα εξερχόμενα" #: ../src/netspeed.c:1056 msgid "Show _bits instead of bytes" msgstr "Προβολή σε _bit αντί για byte" #: ../src/netspeed.c:1060 msgid "Change _icon according to the selected device" msgstr "Αλλαγή του _εικονιδίου σύμφωνα με την επιλεγμένη συσκευή" #: ../src/netspeed.c:1065 msgid "_Always monitor a connected device, if possible" msgstr "Να παρακολουθείται _πάντα μια συνδεμένη συσκευή, αν αυτό είναι δυνατό" #: ../src/netspeed.c:1179 #, c-format msgid "Device Details for %s" msgstr "Λεπτομέρειες συσκευής για την %s" #: ../src/netspeed.c:1205 msgid "_In graph color" msgstr "Χρώμα διαγράμματος των ει_σερχομένων" #: ../src/netspeed.c:1206 msgid "_Out graph color" msgstr "Χρώμα διαγράμματος των ε_ξερχομένων" #: ../src/netspeed.c:1222 msgid "Internet Address:" msgstr "Διεύθυνση διαδικτύου:" #: ../src/netspeed.c:1223 msgid "Netmask:" msgstr "Netmask:" #: ../src/netspeed.c:1224 msgid "Hardware Address:" msgstr "Διεύθυνση υλικού:" #: ../src/netspeed.c:1225 msgid "P-t-P Address:" msgstr "Διεύθυνση αμοιβαίας διασύνδεσης υπολογιστών (P-t-P):" #: ../src/netspeed.c:1226 msgid "Bytes in:" msgstr "Εισερχόμενα byte:" #: ../src/netspeed.c:1227 msgid "Bytes out:" msgstr "Εξερχόμενα byte:" #: ../src/netspeed.c:1229 ../src/netspeed.c:1230 ../src/netspeed.c:1231 #: ../src/netspeed.c:1232 msgid "none" msgstr "κανένα" #: ../src/netspeed.c:1271 msgid "IPV6 Address:" msgstr "Διεύθυνση IPV6:" #: ../src/netspeed.c:1303 msgid "Signal Strength:" msgstr "Ισχύς σήματος:" #: ../src/netspeed.c:1304 msgid "ESSID:" msgstr "ESSID:" #: ../src/netspeed.c:1390 #, c-format msgid "Do you want to disconnect %s now?" msgstr "Θέλετε να αποσυνδεθείτε από το %s τώρα;" #: ../src/netspeed.c:1394 #, c-format msgid "Do you want to connect %s now?" msgstr "Θέλετε να συνδεθείτε στο %s τώρα;" #: ../src/netspeed.c:1490 msgid "Netspeed" msgstr "Μικροεφαρμογή ταχύτητας δικτύου" #: ../src/netspeed.c:1660 msgid "Device _Details" msgstr "_Λεπτομέρειες συσκευής" #: ../src/netspeed.c:1660 msgid "_Preferences..." msgstr "_Προτιμήσεις..." #: ../src/netspeed.c:1660 msgid "_Help" msgstr "_Βοήθεια" #: ../src/netspeed.c:1660 msgid "_About..." msgstr "_Περί..." netspeed_applet-0.16/po/pl.po0000644000175000017500000001427011402426203013124 00000000000000# Netspeed applet pl.po # Copyright (C) 2006 Paweł Marciniak # This file is distributed under the same license as the Netspeed package. # # # Paweł Marciniak , 2006. # Julian Sikorski , 2008. msgid "" msgstr "" "Project-Id-Version: Netspeed Applet 0.14-1\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2008-10-11 13:06+0300\n" "PO-Revision-Date: 2008-09-30 23:09+0200\n" "Last-Translator: Julian Sikorski \n" "Language-Team: Polish \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: Lokalize 0.2\n" "Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 " "|| n%100>=20) ? 1 : 2);\n" #: ../GNOME_NetspeedApplet.server.in.in.h:1 msgid "Internet" msgstr "Internet" #: ../GNOME_NetspeedApplet.server.in.in.h:2 msgid "Netspeed Applet" msgstr "Wyświetla informacje o ruchu na określonym urządzeniu sieciowym." #: ../GNOME_NetspeedApplet.server.in.in.h:3 msgid "Netspeed Applet Factory" msgstr "Fabryka Netspeed Applet" #: ../GNOME_NetspeedApplet.server.in.in.h:4 msgid "Network Monitor" msgstr "Monitor sieci" #: ../src/netspeed.c:407 msgid "b/s" msgstr "b/s" #: ../src/netspeed.c:407 msgid "B/s" msgstr "B/s" #: ../src/netspeed.c:409 msgid "bits" msgstr "bitów" #: ../src/netspeed.c:409 msgid "bytes" msgstr "bajtów" #: ../src/netspeed.c:416 msgid "kb/s" msgstr "kb/s" #: ../src/netspeed.c:416 msgid "KiB/s" msgstr "KiB/s" #: ../src/netspeed.c:418 msgid "kb" msgstr "kb" #: ../src/netspeed.c:418 msgid "KiB" msgstr "KiB" #: ../src/netspeed.c:427 msgid "Mb/s" msgstr "Mb/s" #: ../src/netspeed.c:427 msgid "MiB/s" msgstr "MiB/s" #: ../src/netspeed.c:429 msgid "Mb" msgstr "Mb" #: ../src/netspeed.c:429 msgid "MiB" msgstr "MiB" #: ../src/netspeed.c:755 #, c-format msgid "" "There was an error displaying help:\n" "%s" msgstr "" "Wystąpił błąd:\n" "%s" #: ../src/netspeed.c:806 #, c-format msgid "" "Failed to show:\n" "%s" msgstr "" "Nie udało się pokazać:\n" "%s" #: ../src/netspeed.c:837 msgid "" "A little applet that displays some information on the traffic on the " "specified network device" msgstr "" "Monitor sieci wyświetlający pewne informacje o ruchu na określonym " "urządzeniu sieciowym." #: ../src/netspeed.c:840 msgid "translator-credits" msgstr "" "Paweł Marciniak Julian Sikorski " #: ../src/netspeed.c:842 msgid "Netspeed Website" msgstr "Strona domowa programu" #: ../src/netspeed.c:968 msgid "Netspeed Preferences" msgstr "Preferencje" #: ../src/netspeed.c:991 msgid "General Settings" msgstr "Ustawienia" #: ../src/netspeed.c:1012 msgid "Network _device:" msgstr "Urzą_dzenie sieciowe:" #. Default means device with default route set #: ../src/netspeed.c:1023 msgid "Default" msgstr "Domyślne" #: ../src/netspeed.c:1036 msgid "Show _sum instead of in & out" msgstr "Pokaż _sumę danych odebranych i wysłanych" #: ../src/netspeed.c:1040 msgid "Show _bits instead of bytes" msgstr "Pokaż _bity zamiast bajty" #: ../src/netspeed.c:1044 msgid "Change _icon according to the selected device" msgstr "Zmień _ikonę stosownie do wybranego urządzenia" #: ../src/netspeed.c:1155 #, c-format msgid "Device Details for %s" msgstr "Szczegóły urządzenia %s" #: ../src/netspeed.c:1181 msgid "_In graph color" msgstr "Kolor wykresu danych odebranych" #: ../src/netspeed.c:1182 msgid "_Out graph color" msgstr "Kolor wykresu danych wysłanych" #: ../src/netspeed.c:1198 msgid "Internet Address:" msgstr "Adres internetowy:" #: ../src/netspeed.c:1199 msgid "Netmask:" msgstr "Maska sieci:" #: ../src/netspeed.c:1200 msgid "Hardware Address:" msgstr "Adres sprzętowy:" #: ../src/netspeed.c:1201 msgid "P-t-P Address:" msgstr "Adres P-t-P:" #: ../src/netspeed.c:1202 msgid "Bytes in:" msgstr "Bajtów odebranych:" #: ../src/netspeed.c:1203 msgid "Bytes out:" msgstr "Bajtów wysłanych:" #: ../src/netspeed.c:1205 ../src/netspeed.c:1206 ../src/netspeed.c:1207 #: ../src/netspeed.c:1208 msgid "none" msgstr "żaden" #: ../src/netspeed.c:1247 msgid "IPV6 Address:" msgstr "Adres IPv6" #: ../src/netspeed.c:1279 msgid "Signal Strength:" msgstr "Siła sygnału" #: ../src/netspeed.c:1280 msgid "ESSID:" msgstr "ESSID:" #: ../src/netspeed.c:1366 #, c-format msgid "Do you want to disconnect %s now?" msgstr "Czy chcesz deaktywować urządzenie %s?" #: ../src/netspeed.c:1370 #, c-format msgid "Do you want to connect %s now?" msgstr "Czy chcesz aktywować urządzenie %s?" #: ../src/netspeed.c:1444 #, c-format msgid "%s is down" msgstr "Połączenie sieciowe %s jest rozłączone" #: ../src/netspeed.c:1449 #, c-format msgid "" "%s: %s\n" "in: %s out: %s" msgstr "" "%s :%s\n" "odebrano: %s wysłano: %s" #: ../src/netspeed.c:1451 ../src/netspeed.c:1460 msgid "has no ip" msgstr "nie ma adresu ip" #: ../src/netspeed.c:1458 #, c-format msgid "" "%s: %s\n" "sum: %s" msgstr "" "%s: %s\n" "w sumie: %s" #: ../src/netspeed.c:1467 #, c-format msgid "" "\n" "ESSID: %s\n" "Strength: %d %%" msgstr "" "\n" "ESSID: %s\n" "Siła: %d %%" #: ../src/netspeed.c:1468 msgid "unknown" msgstr "nieznane" #: ../src/netspeed.c:1515 msgid "Netspeed" msgstr "Netspeed" #: ../src/netspeed.c:1683 msgid "Device _Details" msgstr "Szczegóły urzą_dzenia" #: ../src/netspeed.c:1683 msgid "_Preferences..." msgstr "_Preferencje" #: ../src/netspeed.c:1683 msgid "_Help" msgstr "Pomo_c" #: ../src/netspeed.c:1683 msgid "_About..." msgstr "_Informacja o" #~ msgid "_Update interval:" #~ msgstr "_Uaktualniaj co:" #~ msgid "millisecond" #~ msgstr "milisekund" #~ msgid "Label _font size:" #~ msgstr "Rozmiar czcionki etykiety" #~ msgid "points" #~ msgstr "punktów" #~ msgid "_Always monitor a connected device, if possible" #~ msgstr "Zawszę monitoruj połączone urządzenie sieciowe, jeśli to możliwe" #~ msgid "kB/s" #~ msgstr "kB/s" #~ msgid "kbyte" #~ msgstr "kilobajtów" #~ msgid "Mbyte" #~ msgstr "megabajtów" #~ msgid "TRANSLATORS" #~ msgstr "Paweł Marciniak " #~ msgid "Netspeed Applet Settings" #~ msgstr "Nastavení apletu Netspeed" #~ msgid "Device %s" #~ msgstr "Zařízení %s" #~ msgid "Refreshes per second:" #~ msgstr "Aktualizací za sekundu:" #~ msgid "0 b/s" #~ msgstr "0 b/s" netspeed_applet-0.16/po/POTFILES.in0000644000175000017500000000006211402426203013720 00000000000000GNOME_NetspeedApplet.server.in.in src/netspeed.c netspeed_applet-0.16/po/pa.po0000644000175000017500000001442111402426203013107 00000000000000# Punjabi translation of netspeed. # Copyright (C) 2009 netspeed's COPYRIGHT HOLDER # This file is distributed under the same license as the netspeed package. # # A S Alam , 2009. msgid "" msgstr "" "Project-Id-Version: netspeed master\n" "Report-Msgid-Bugs-To: http://bugzilla.gnome.org/enter_bug." "cgi?product=netspeed&component=general\n" "POT-Creation-Date: 2009-06-03 06:25+0000\n" "PO-Revision-Date: 2009-06-13 07:28+0530\n" "Last-Translator: A S Alam \n" "Language-Team: Punjabi/Panjabi \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: Lokalize 0.3\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" #: ../GNOME_NetspeedApplet.server.in.in.h:1 msgid "Internet" msgstr "ਇੰਟਰਨੈੱਟ" #: ../GNOME_NetspeedApplet.server.in.in.h:2 msgid "Netspeed Applet" msgstr "ਨੈੱਟ-ਸਪੀਡ ਐਪਲਿਟ" #: ../GNOME_NetspeedApplet.server.in.in.h:3 msgid "Netspeed Applet Factory" msgstr "ਨੈੱਟਸਪੀਡ ਐਪਲਿਟ ਫੈਕਟਰੀ" #: ../GNOME_NetspeedApplet.server.in.in.h:4 msgid "Network Monitor" msgstr "ਨੈੱਟਵਰਕ ਮਾਨੀਟਰ" #: ../src/netspeed.c:407 msgid "b/s" msgstr "b/s" #: ../src/netspeed.c:407 msgid "B/s" msgstr "B/s" #: ../src/netspeed.c:409 msgid "bits" msgstr "ਬਿੱਟ" #: ../src/netspeed.c:409 msgid "bytes" msgstr "ਬਾਈਟ" #: ../src/netspeed.c:416 msgid "kb/s" msgstr "kb/s" #: ../src/netspeed.c:416 msgid "KiB/s" msgstr "KiB/s" #: ../src/netspeed.c:418 msgid "kb" msgstr "kb" #: ../src/netspeed.c:418 msgid "KiB" msgstr "KiB" #: ../src/netspeed.c:427 msgid "Mb/s" msgstr "Mb/s" #: ../src/netspeed.c:427 msgid "MiB/s" msgstr "MiB/s" #: ../src/netspeed.c:429 msgid "Mb" msgstr "Mb" #: ../src/netspeed.c:429 msgid "MiB" msgstr "MiB" #: ../src/netspeed.c:755 #, c-format msgid "" "There was an error displaying help:\n" "%s" msgstr "" "ਮੱਦਦ ਵੇਖਾਉਣ ਵਿੱਚ ਸਮੱਸਿਆ ਆਈ ਹੈ:\n" "%s " #: ../src/netspeed.c:806 #, c-format msgid "" "Failed to show:\n" "%s" msgstr "" "ਵੇਖਾਉਣ ਲਈ ਫੇਲ੍ਹ:\n" "%s" #: ../src/netspeed.c:837 msgid "" "A little applet that displays some information on the traffic on the " "specified network device" msgstr "" "ਇੱਕ ਨਿੰਮਾ ਜਿਹਾ ਐਪਲਿਟ, ਜੋ ਕਿ ਦਿੱਤੇ ਗਏ ਨੈੱਟਵਰਕ ਜੰਤਰ ਲਈ ਟਰੈਫਿਕ ਜਾਣਕਾਰੀ " "ਦਿੰਦਾ ਹੈ।" #: ../src/netspeed.c:840 msgid "translator-credits" msgstr "" "ਅਮਨਪਰੀਤ ਸਿੰਘ ਆਲਮ\n" "Punjabi OpenSource Team\n" "http://www.satluj.com" #: ../src/netspeed.c:842 msgid "Netspeed Website" msgstr "ਨੈੱਟ-ਸਪੀਡ ਵੈੱਬਸਾਈਟ" #: ../src/netspeed.c:968 msgid "Netspeed Preferences" msgstr "ਨੈੱਟਸਪੀਡ ਪਸੰਦ" #: ../src/netspeed.c:991 msgid "General Settings" msgstr "ਸਧਾਰਨ ਸੈਟਿੰਗ" #: ../src/netspeed.c:1012 msgid "Network _device:" msgstr "ਨੈੱਟਵਰਕ ਜੰਤਰ(_d):" #. Default means device with default route set #: ../src/netspeed.c:1023 msgid "Default" msgstr "ਡਿਫਾਲਟ" #: ../src/netspeed.c:1036 msgid "Show _sum instead of in & out" msgstr "ਆ ਰਹੇ ਅਤੇ ਜਾ ਰਹੇ ਦੀ ਬਜਾਏ ਕੁੱਲ ਜੋੜ ਵੇਖੋ(_s)" #: ../src/netspeed.c:1040 msgid "Show _bits instead of bytes" msgstr "ਬਾਈਟ ਦੀ ਬਜਾਏ ਬਿੱਟ ਵੇਖੋ(_b)" #: ../src/netspeed.c:1044 msgid "Change _icon according to the selected device" msgstr "ਚੁਣੇ ਜੰਤਰ ਦੀ ਬਜਾਏ ਆਈਕਾਨ ਬਦਲੋ(_i)" #: ../src/netspeed.c:1155 #, c-format msgid "Device Details for %s" msgstr "%s ਲਈ ਜੰਤਰ ਵੇਰਵਾ" #: ../src/netspeed.c:1181 msgid "_In graph color" msgstr "ਆ ਰਹੇ ਗਰਾਫ਼ ਰੰਗ(_I)" #: ../src/netspeed.c:1182 msgid "_Out graph color" msgstr "ਜਾ ਰਹੇ ਗਰਾਫ਼ ਰੰਗ(_O)" #: ../src/netspeed.c:1198 msgid "Internet Address:" msgstr "ਇੰਟਰਨੈੱਟ ਐਡਰੈੱਸ:" #: ../src/netspeed.c:1199 msgid "Netmask:" msgstr "ਨੈੱਟਮਾਸਕ:" #: ../src/netspeed.c:1200 msgid "Hardware Address:" msgstr "ਹਾਰਡਵੇਅਰ ਐਡਰੈਸ:" #: ../src/netspeed.c:1201 msgid "P-t-P Address:" msgstr "P-t-P ਐਡਰੈੱਸ:" #: ../src/netspeed.c:1202 msgid "Bytes in:" msgstr "ਬਾਈਟ ਆ ਰਹੇ:" #: ../src/netspeed.c:1203 msgid "Bytes out:" msgstr "ਬਾਈਟ ਜਾ ਰਹੇ:" #: ../src/netspeed.c:1205 ../src/netspeed.c:1206 ../src/netspeed.c:1207 #: ../src/netspeed.c:1208 msgid "none" msgstr "ਕੋਈ ਨਹੀਂ" #: ../src/netspeed.c:1247 msgid "IPv6 Address:" msgstr "IPv6 ਐਡਰੈੱਸ:" #: ../src/netspeed.c:1279 msgid "Signal Strength:" msgstr "ਸਿਗਨਲ ਤਾਕਤ:" #: ../src/netspeed.c:1280 msgid "ESSID:" msgstr "ESSID:" #: ../src/netspeed.c:1366 #, c-format msgid "Do you want to disconnect %s now?" msgstr "ਕੀ ਤੁਸੀਂ ਹੁਣ %s ਨਾਲੋਂ ਡਿਸ-ਕੁਨੈਕਟ ਹੋਣਾ ਚਾਹੁੰਦੇ ਹੋ?" #: ../src/netspeed.c:1370 #, c-format msgid "Do you want to connect %s now?" msgstr "ਕੀ ਤੁਸੀਂ ਹੁਣ %s ਨਾਲ ਕੁਨੈਕਟ ਹੋਣਾ ਚਾਹੁੰਦੇ ਹੋ?" #: ../src/netspeed.c:1444 #, c-format msgid "%s is down" msgstr "%s ਬੰਦ ਹੈ" #: ../src/netspeed.c:1449 #, c-format msgid "" "%s: %s\n" "in: %s out: %s" msgstr "" "%s: %s\n" "ਆ ਰਹੇ: %s ਜਾ ਰਹੇ: %s" #: ../src/netspeed.c:1451 ../src/netspeed.c:1460 msgid "has no ip" msgstr "ਕੋਈ ip ਨਹੀਂ" #: ../src/netspeed.c:1458 #, c-format msgid "" "%s: %s\n" "sum: %s" msgstr "" "%s: %s\n" "ਜੋੜ: %s" #: ../src/netspeed.c:1467 #, c-format msgid "" "\n" "ESSID: %s\n" "Strength: %d %%" msgstr "" "\n" "ESSID: %s\n" "ਤਾਕਤ: %d %%" #: ../src/netspeed.c:1468 msgid "unknown" msgstr "ਅਣਜਾਣ" #: ../src/netspeed.c:1515 msgid "Netspeed" msgstr "ਨੈੱਟਸਪੀਡ" #: ../src/netspeed.c:1683 msgid "Device _Details" msgstr "ਜੰਤਰ ਵੇਰਵੇ(_D)" #: ../src/netspeed.c:1683 msgid "_Preferences..." msgstr "ਮੇਰੀ ਪਸੰਦ(_P)..." #: ../src/netspeed.c:1683 msgid "_Help" msgstr "ਮੱਦਦ(_H)" #: ../src/netspeed.c:1683 msgid "_About..." msgstr "ਇਸ ਬਾਰੇ(_A)..." netspeed_applet-0.16/po/ChangeLog0000644000175000017500000001454111402426203013724 000000000000002009-04-29 Mario Blättermann * de.po: Updated German translation 2009-04-28 Daniel Nylander * sv.po: Updated Swedish translation. 2009-03-09 Priit Laes * et.po: Translation updated by Mattias Põldaru 2009-01-22 Luca Ferretti * it.po: Converted to UTF-8 2008-12-30 Mario Blättermann * de.po: Updated German translation 2008-12-06 Leonardo Ferreira Fontenelle * pt_BR.po: Updated Brazilian Portuguese translation. Contributed by Fábio Nogueira. 2008-12-04 Luca Ferretti * it.po: Updated Italian translation by Gianvito Cavasoli 2008-11-07 Leonardo Ferreira Fontenelle * pt_BR.po: Updated Brazilian Portuguese translation by Fábio Nogueira. 2008-10-11 Jörgen Scheibengruber * pl.po: Commiting translation contributed by Julian Sikorski 2008-10-07 Kjartan Maraas * LINGUAS: Added 'nb'. * nb.po: Added Norwegian bokmål translation. 2008-09-30 Duarte Loreto * pt.po: Updated Portuguese translation by António Lima . 2008-09-29 Matej Urbančič * sl.po: Added Slovenian translation 2008-09-25 Claude Paroz * fr.po: Updated French translation. 2008-09-21 Gintautas Miliauskas * lt.po: Added Lithuanian translation. * LINGUAS: Added lt. 2008-09-14 Ilkka Tuohela * fi.po: Updated Finnish translation. 2008-09-13 Jorge González * es.po: Updated Spanish translation by Daniel Mustieles 2008-09-12 Daniel Nylander * sv.po: Updated Swedish translation. 2008-09-09 Inaki Larranaga Murgoitio * eu.po: Updated Basque translation. 2008-09-07 Jörgen Scheibengruber * POTFILES.skip: added GNOME_NetspeedApplet.server.in 2008-08-29 Jorge Gonzalez * es.po: Updated Spanish translation 2008-08-27 Inaki Larranaga Murgoitio * eu.po: Updated Basque translation. 2008-08-2 Djihed Afifi * ar.po: Updated Arabic Translation by Djihed Afifi. 2008-07-31 Djihed Afifi * ar.po: Added Arabic Translation. * LINGUAS: Added ar. 2008-07-29 Duarte Loreto * pt.po: Updated Portuguese translation by António Lima . 2008-07-07 Runa Bhattacharjee * ps.po: Updated Pashto Translations by Zabeeh Khan. 2008-07-01 Simos Xenitellis * ps.po: Added Pashto translation by Zabeeh Khan. * LINGUAS: Added ps (Pashto). 2008-06-25 Jonh Wendell * pt_BR.po: Updated Brazilian Portuguese translation by Fábio Nogueira and Leonardo Gregianin. 2008-06-23 Daniel Nylander * sv.po: Updated Swedish translation. 2008-06-15 Jorge Gonzalez * es.po: Updated Spanish translation 2008-04-27 Gabor Kelemen * hu.po: Translation updated. 2008-03-18 Simos Xenitellis * el.po: Added Greek translation by Giannis Katsampiris, reviewed translation. * LINGUAS: Added el (Greek). 2008-03-14 Andre Klapper * de.po: Updated German translation. 2008-03-10 Inaki Larranaga Murgoitio * LINGUAS: Added 'eu' (Basque) entry. * eu.po: Add Basque translation. 2008-03-09 Ilkka Tuohela * fi.po: Updated Finnish translation. 2008-03-05 Jorge Gonzalez * es.po: Updated Spanish translation by Daniel Mustieles 2008-03-04 Duarte Loreto * pt.po: Updated Portuguese translation by Antonio Lima . * LINGUAS: Added Portuguese (pt). 2008-02-21 Daniel Nylander * sv.po: Updated Swedish translation. 2008-02-16 Jaap Haitsma * .cvsignore: Removed 2007-08-06 Ilkka Tuohela * fi.po: Updated Finnish translation. 2006-10-02 Takeshi AIHANA * ja.po: Updated Japanese translation. 2006-09-29 Wouter Bolsterlee * nl.po: Updated Dutch translation by Wouter Bolsterlee. 2006-09-29 Gabor Kelemen * hu.po: Translation updated. 2006-09-28 Jörgen Scheibengruber * pl.po: Updated Polish translation (from Paweł Marciniak) * ru.po: Updated Russian translation (from Vyaheslav Dikonov) 2006-09-28 Benoît Dejean * fr.po: Updated French translation. 2006-09-25 Ilkka Tuohela * fi.po: Added Finnish translation. 2006-09-25 Daniel Nylander * sv.po: Updated Swedish translation. 2006-09-25 Francisco Javier F. Serrador * es.po: Updated Spanish translation. 2006-07-11 Joergen Scheibengruber * de.po: Update 2006-05-31 Joergen Scheibengruber * pl.po: Added Polish translation by Paweł Marciniak 2006-02-07 Raphael Higino * pt_BR.po: Added Brazilian Portuguese translation by Leonardo Gregianin . 2005-11-08 Pedro Villavicencio Garrido * zh_CN.po: Updated Chinese translation thanks to Black Penguin . 2005-10-28 Benoît Dejean * fr.po: Updated French translation. 2005-07-29 Takeshi AIHANA * ja.po: Updated Japanese translation and Fixed translation pointed by Maciej Katafiasz . 2005-07-04 Hendrik Richter * de.po: Fixed German translation by Jens Seidel . 2005-06-15 Pedro Villavicencio Garrido * es.po: update Spanish translation (Héctor Enríquez Díaz ) 2002-07-03 gettextize * Makefile.in.in: Upgrade to gettext-0.10.40. 2002-07-03 gettextize * Makefile.in.in: Upgrade to gettext-0.10.40. 2002-07-03 gettextize * Makefile.in.in: Upgrade to gettext-0.10.40. 2002-07-03 gettextize * Makefile.in.in: Upgrade to gettext-0.10.40. netspeed_applet-0.16/po/ro.po0000644000175000017500000001116611402426203013132 00000000000000# Romanian translation of netspeed_applet. # Copyright (C) 2003 THE netspeed_applet'S COPYRIGHT HOLDER # This file is distributed under the same license as the netspeed_applet package. # Mugurel Tudor , 2003. # , fuzzy # # msgid "" msgstr "" "Project-Id-Version: netspeed_applet 0.9\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2005-04-11 03:07+0200\n" "PO-Revision-Date: 2003-10-04 21:17+0300\n" "Last-Translator: Mugurel Tudor \n" "Language-Team: Romanian\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #: ../GNOME_NetspeedApplet.server.in.h:1 msgid "Internet" msgstr "Internet" #: ../GNOME_NetspeedApplet.server.in.h:2 msgid "Netspeed Applet" msgstr "Aplet Viteză Reţea" #: ../GNOME_NetspeedApplet.server.in.h:3 msgid "Netspeed Applet Factory" msgstr "Uzina aplet viteză de reţea" #: ../GNOME_NetspeedApplet.server.in.h:4 msgid "Network Monitor" msgstr "Monitorizare reţea" #: ../src/netspeed.c:276 msgid "b/s" msgstr "b/s" #: ../src/netspeed.c:276 msgid "B/s" msgstr "B/s" #: ../src/netspeed.c:276 msgid "byte" msgstr "byte" #: ../src/netspeed.c:279 ../src/netspeed.c:282 msgid "kb/s" msgstr "kb/s" #: ../src/netspeed.c:279 ../src/netspeed.c:282 msgid "kB/s" msgstr "kB/s" #: ../src/netspeed.c:279 ../src/netspeed.c:282 msgid "kbyte" msgstr "kbyte" #: ../src/netspeed.c:284 msgid "Mb/s" msgstr "Mb/s" #: ../src/netspeed.c:284 msgid "MB/s" msgstr "MB/s" #: ../src/netspeed.c:284 msgid "Mbyte" msgstr "Mbyte" #: ../src/netspeed.c:468 #, c-format msgid "" "%s :%s\n" "in: %s out: %s" msgstr "" "%s :%s\n" "recepţie: %s transmisie: %s" #: ../src/netspeed.c:469 ../src/netspeed.c:472 msgid "has no ip" msgstr "nu are ip" #: ../src/netspeed.c:471 #, c-format msgid "" "%s: %s\n" "sum: %s" msgstr "" "%s: %s\n" "total: %s" #: ../src/netspeed.c:479 #, c-format msgid "%s is down" msgstr "%s nu este activ" #. Feel free to put your names here translators :-) #: ../src/netspeed.c:590 msgid "TRANSLATORS" msgstr "Mugurel Tudor " #: ../src/netspeed.c:595 msgid "Netspeed" msgstr "Viteză reţea" #: ../src/netspeed.c:598 msgid "" "A little applet that displays some information on the traffic on the " "specified network device" msgstr "" "Un mic aplet ce afişează informaţii despre traficul dispozitivului de reţea " "specificat" #: ../src/netspeed.c:791 msgid "Netspeed Preferences" msgstr "Preferinţe viteză reţea" #: ../src/netspeed.c:814 msgid "General Settings" msgstr "Setări generale" #: ../src/netspeed.c:835 msgid "Network _device:" msgstr "_Dispozitiv reţea:" #: ../src/netspeed.c:859 msgid "_Update interval:" msgstr "Interval _actualizare:" #: ../src/netspeed.c:875 msgid "millisecond" msgstr "milisecunde" #: ../src/netspeed.c:884 msgid "Label _font size:" msgstr "Mărime _font etichetă:" #: ../src/netspeed.c:900 msgid "points" msgstr "puncte" #: ../src/netspeed.c:906 msgid "Show _sum instead of in & out" msgstr "Afişează _totalul în loc de recepţie & transmisie" #: ../src/netspeed.c:910 msgid "Show _bits/s (b/s) instead of bytes/s (B/s)" msgstr "Afişează _biţi/s (b/s) în loc de bytes/s (B/s)" #: ../src/netspeed.c:914 msgid "Change _icon according to the selected device" msgstr "Schimbă _iconiţa funcţie de dispozitivul selectat" #: ../src/netspeed.c:919 msgid "_Always monitor a connected device, if possible" msgstr "" #: ../src/netspeed.c:1041 #, c-format msgid "Device Details for %s" msgstr "Detalii dispozitiv pentru %s" #: ../src/netspeed.c:1067 msgid "_In graph color" msgstr "Culoare grafic _recepţie" #: ../src/netspeed.c:1068 msgid "_Out graph color" msgstr "Culoare grafic _transmisie" #: ../src/netspeed.c:1087 msgid "Internet Address:" msgstr "Adresa internet:" #: ../src/netspeed.c:1088 msgid "Netmask:" msgstr "Masca de reţea:" #: ../src/netspeed.c:1089 msgid "Hardware Address:" msgstr "Adresa fizică:" #: ../src/netspeed.c:1090 msgid "P-t-P Address:" msgstr "Adresa P-t-P:" #: ../src/netspeed.c:1091 msgid "Bytes in:" msgstr "Bytes recepţionaţi:" #: ../src/netspeed.c:1092 msgid "Bytes out:" msgstr "Bytes transmişi:" #: ../src/netspeed.c:1094 ../src/netspeed.c:1095 ../src/netspeed.c:1096 #: ../src/netspeed.c:1097 msgid "none" msgstr "nici una" #: ../src/netspeed.c:1226 #, c-format msgid "Do you want to disconnect %s now?" msgstr "" #: ../src/netspeed.c:1230 #, c-format msgid "Do you want to connect %s now?" msgstr "" #: ../src/netspeed.c:1455 msgid "Device _Details" msgstr "_Detalii Dispozitiv" #: ../src/netspeed.c:1455 msgid "_Preferences..." msgstr "_Preferinţe..." #: ../src/netspeed.c:1455 msgid "_Help" msgstr "_Ajutor" #: ../src/netspeed.c:1455 msgid "_About..." msgstr "_Despre..." netspeed_applet-0.16/po/cs.po0000644000175000017500000001266011402426203013117 00000000000000# Czech translation of Netspeed. # Copyright (C) 2002 Michal Bukovjan . # Copyright (C) 2009 the author(s) of Netspeed. # This file is distributed under the same license as the netspeed package. # Michal Bukovjan , 2002. # Marek Černocký , 2009. # msgid "" msgstr "" "Project-Id-Version: Netspeed Applet 0.6\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2009-11-04 20:59+0100\n" "PO-Revision-Date: 2009-11-04 00:58+0100\n" "Last-Translator: Marek Černocký \n" "Language-Team: Czech \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 0.9.6\n" "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2\n" "X-Poedit-Language: Czech\n" "X-Poedit-SourceCharset: utf-8\n" #: ../GNOME_NetspeedApplet.server.in.in.h:1 msgid "Internet" msgstr "Internet" #: ../GNOME_NetspeedApplet.server.in.in.h:2 msgid "Netspeed Applet" msgstr "Applet Netspeed" #: ../GNOME_NetspeedApplet.server.in.in.h:3 msgid "Netspeed Applet Factory" msgstr "Generátor appletu Netspeed" #: ../GNOME_NetspeedApplet.server.in.in.h:4 msgid "Network Monitor" msgstr "Sledování sítě" #: ../src/netspeed.c:407 msgid "b/s" msgstr "b/s" #: ../src/netspeed.c:407 msgid "B/s" msgstr "B/s" #: ../src/netspeed.c:409 msgid "bits" msgstr "bitů" #: ../src/netspeed.c:409 msgid "bytes" msgstr "bajtů" #: ../src/netspeed.c:416 msgid "kb/s" msgstr "kb/s" #: ../src/netspeed.c:416 msgid "KiB/s" msgstr "KiB/s" #: ../src/netspeed.c:418 msgid "kb" msgstr "kb" #: ../src/netspeed.c:418 msgid "KiB" msgstr "KiB" #: ../src/netspeed.c:427 msgid "Mb/s" msgstr "Mb/s" #: ../src/netspeed.c:427 msgid "MiB/s" msgstr "MiB/s" #: ../src/netspeed.c:429 msgid "Mb" msgstr "Mb" #: ../src/netspeed.c:429 msgid "MiB" msgstr "MiB" #: ../src/netspeed.c:755 #, c-format msgid "" "There was an error displaying help:\n" "%s" msgstr "" "Při zobrazování nápovědy se vyskytla chyba:\n" "%s" #: ../src/netspeed.c:806 #, c-format msgid "" "Failed to show:\n" "%s" msgstr "" "Nelze zobrazit:\n" "%s" #: ../src/netspeed.c:837 msgid "" "A little applet that displays some information on the traffic on the " "specified network device" msgstr "" "Malý applet zobrazující vybrané informace o provozu na vybraném síťovém " "zařízení" #: ../src/netspeed.c:840 msgid "translator-credits" msgstr "" "Michal Bukovjan \n" "Marek Černocký " #: ../src/netspeed.c:842 msgid "Netspeed Website" msgstr "Webové stránky Netspeed" #: ../src/netspeed.c:968 msgid "Netspeed Preferences" msgstr "Předvolby Netspeed" #: ../src/netspeed.c:991 msgid "General Settings" msgstr "Obecná nastavení" #: ../src/netspeed.c:1012 msgid "Network _device:" msgstr "Síťové _zařízení:" #. Default means device with default route set #: ../src/netspeed.c:1023 msgid "Default" msgstr "Výchozí" #: ../src/netspeed.c:1036 msgid "Show _sum instead of in & out" msgstr "Ukazovat celkový _souhrn místo údajů vstupu a výstupu" #: ../src/netspeed.c:1040 msgid "Show _bits instead of bytes" msgstr "Ukazovat _bity místo bajtů" #: ../src/netspeed.c:1044 msgid "Change _icon according to the selected device" msgstr "Měnit _ikonu podle vybraného zařízení" #: ../src/netspeed.c:1155 #, c-format msgid "Device Details for %s" msgstr "Podrobnosti o zařízení %s" #: ../src/netspeed.c:1181 msgid "_In graph color" msgstr "Barva grafu v_stupu" #: ../src/netspeed.c:1182 msgid "_Out graph color" msgstr "Barva grafu _výstupu" #: ../src/netspeed.c:1198 msgid "Internet Address:" msgstr "Internetová adresa:" #: ../src/netspeed.c:1199 msgid "Netmask:" msgstr "Síťová maska:" #: ../src/netspeed.c:1200 msgid "Hardware Address:" msgstr "Hardwarová adresa:" #: ../src/netspeed.c:1201 msgid "P-t-P Address:" msgstr "Adresa P-t-P:" #: ../src/netspeed.c:1202 msgid "Bytes in:" msgstr "Bajtů dovnitř:" #: ../src/netspeed.c:1203 msgid "Bytes out:" msgstr "Bajtů ven:" #: ../src/netspeed.c:1205 ../src/netspeed.c:1206 ../src/netspeed.c:1207 #: ../src/netspeed.c:1208 msgid "none" msgstr "žádné" #: ../src/netspeed.c:1247 msgid "IPv6 Address:" msgstr "Adresa IPv6:" #: ../src/netspeed.c:1279 msgid "Signal Strength:" msgstr "Síla signálu:" #: ../src/netspeed.c:1280 msgid "ESSID:" msgstr "ESSID:" #: ../src/netspeed.c:1366 #, c-format msgid "Do you want to disconnect %s now?" msgstr "Chcete nyní odpojit %s?" #: ../src/netspeed.c:1370 #, c-format msgid "Do you want to connect %s now?" msgstr "Chcete nyní připojit %s?" #: ../src/netspeed.c:1444 #, c-format msgid "%s is down" msgstr "%s je vypnuto" #: ../src/netspeed.c:1449 #, c-format msgid "" "%s: %s\n" "in: %s out: %s" msgstr "" "%s :%s\n" "dovnitř: %s ven: %s" #: ../src/netspeed.c:1451 ../src/netspeed.c:1460 msgid "has no ip" msgstr "nemá adresu IP" #: ../src/netspeed.c:1458 #, c-format msgid "" "%s: %s\n" "sum: %s" msgstr "" "%s: %s\n" "celkem: %s" #: ../src/netspeed.c:1467 #, c-format msgid "" "\n" "ESSID: %s\n" "Strength: %d %%" msgstr "" "\n" "ESSID: %s\n" "Signál: %d %%" #: ../src/netspeed.c:1468 msgid "unknown" msgstr "neznámo" #: ../src/netspeed.c:1515 msgid "Netspeed" msgstr "Applet Netspeed" #: ../src/netspeed.c:1683 msgid "Device _Details" msgstr "Po_drobnosti o zařízení" #: ../src/netspeed.c:1683 msgid "_Preferences..." msgstr "_Předvolby…" #: ../src/netspeed.c:1683 msgid "_Help" msgstr "_Nápověda" #: ../src/netspeed.c:1683 msgid "_About..." msgstr "O _appletu…" netspeed_applet-0.16/po/ja.po0000644000175000017500000001256611402426203013111 00000000000000# netspeed_applet ja.po. # Copyright (C) 2003, 2005, 2006 Free Software Foundation, Inc. # This file is distributed under the same license as the netspeed_applet package. # Takeshi AIHANA , 2003, 2005, 2006. # msgid "" msgstr "" "Project-Id-Version: netspeed_applet HEAD\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2006-10-02 11:03+0900\n" "PO-Revision-Date: 2006-10-02 11:02+0900\n" "Last-Translator: Takeshi AIHANA \n" "Language-Team: Japanese \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #: ../GNOME_NetspeedApplet.server.in.in.h:1 msgid "Internet" msgstr "インターネット" #: ../GNOME_NetspeedApplet.server.in.in.h:2 msgid "Netspeed Applet" msgstr "Netspeed アプレットです" #: ../GNOME_NetspeedApplet.server.in.in.h:3 msgid "Netspeed Applet Factory" msgstr "ネットスピード・アプレットのファクトリ" #: ../GNOME_NetspeedApplet.server.in.in.h:4 msgid "Network Monitor" msgstr "ネットワーク・モニタ" #: ../src/netspeed.c:279 msgid "b/s" msgstr "b/s" #: ../src/netspeed.c:279 msgid "B/s" msgstr "B/s" #: ../src/netspeed.c:281 msgid "bits" msgstr "ビット" #: ../src/netspeed.c:281 msgid "bytes" msgstr "バイト" #: ../src/netspeed.c:288 msgid "kb/s" msgstr "kb/s" #: ../src/netspeed.c:288 msgid "KiB/s" msgstr "KiB/s" #: ../src/netspeed.c:290 msgid "kb" msgstr "kb" #: ../src/netspeed.c:290 msgid "KiB" msgstr "KiB" #: ../src/netspeed.c:299 msgid "Mb/s" msgstr "Mb/s" #: ../src/netspeed.c:299 msgid "MiB/s" msgstr "MiB/s" #: ../src/netspeed.c:301 msgid "Mb" msgstr "Mb" #: ../src/netspeed.c:301 msgid "MiB" msgstr "MiB" #: ../src/netspeed.c:502 #, c-format msgid "" "%s: %s\n" "in: %s out: %s" msgstr "" "%s: %s\n" "入: %s 出: %s" #: ../src/netspeed.c:504 ../src/netspeed.c:510 msgid "has no ip" msgstr "には IP がありません" #: ../src/netspeed.c:508 #, c-format msgid "" "%s: %s\n" "sum: %s" msgstr "" "%s: %s\n" "合計: %s" #: ../src/netspeed.c:521 #, c-format msgid "%s is down" msgstr "%s は接続断です" #: ../src/netspeed.c:645 msgid "Netspeed Website" msgstr "Netspeed のウェブサイト" #: ../src/netspeed.c:654 msgid "Netspeed" msgstr "Netspeed" #: ../src/netspeed.c:657 msgid "" "A little applet that displays some information on the traffic on the " "specified network device" msgstr "" "指定したネットワーク・デバイスのトラフィック情報を表示する小さなアプレットで" "す。" #: ../src/netspeed.c:660 msgid "translator-credits" msgstr "" "相花 毅 \n" "日本GNOMEユーザー会 http://www.gnome.gr.jp" #: ../src/netspeed.c:713 #, c-format msgid "" "There was an error displaying help:\n" "%s" msgstr "" "ヘルプを表示する際にエラーが発生しました:\n" "%s" #: ../src/netspeed.c:855 msgid "Netspeed Preferences" msgstr "Netspedd の設定" #: ../src/netspeed.c:878 msgid "General Settings" msgstr "全般の設定" #: ../src/netspeed.c:899 msgid "Network _device:" msgstr "ネットワークのデバイス(_D):" #: ../src/netspeed.c:923 msgid "_Update interval:" msgstr "更新間隔(_U):" #: ../src/netspeed.c:939 msgid "millisecond" msgstr "ミリ秒" #: ../src/netspeed.c:948 msgid "Label _font size:" msgstr "フォントのサイズ(_F):" #: ../src/netspeed.c:964 msgid "points" msgstr "ポイント" #: ../src/netspeed.c:970 msgid "Show _sum instead of in & out" msgstr "入/出力のかわりに合計を表示する(_S)" #: ../src/netspeed.c:974 msgid "Show _bits instead of bytes" msgstr "バイト数ではなくビット数で表示する(_B)" #: ../src/netspeed.c:978 msgid "Change _icon according to the selected device" msgstr "選択したデバイスに応じてアイコンを変更する(_I)" #: ../src/netspeed.c:983 msgid "_Always monitor a connected device, if possible" msgstr "常に接続したデバイスを監視する (可能ならば)(_A)" #: ../src/netspeed.c:1102 #, c-format msgid "Device Details for %s" msgstr "デバイス %s の詳細" #: ../src/netspeed.c:1128 msgid "_In graph color" msgstr "入力グラフの色(_I)" #: ../src/netspeed.c:1129 msgid "_Out graph color" msgstr "出力グラフの色(_O)" #: ../src/netspeed.c:1145 msgid "Internet Address:" msgstr "IP-アドレス:" #: ../src/netspeed.c:1146 msgid "Netmask:" msgstr "ネットマスク" #: ../src/netspeed.c:1147 msgid "Hardware Address:" msgstr "MAC アドレス:" #: ../src/netspeed.c:1148 msgid "P-t-P Address:" msgstr "P-t-P アドレス:" #: ../src/netspeed.c:1149 msgid "Bytes in:" msgstr "入力バイト数:" #: ../src/netspeed.c:1150 msgid "Bytes out:" msgstr "出力バイト数:" #: ../src/netspeed.c:1152 ../src/netspeed.c:1153 ../src/netspeed.c:1154 #: ../src/netspeed.c:1155 msgid "none" msgstr "なし" #: ../src/netspeed.c:1194 msgid "IPV6 Address:" msgstr "IPv6-アドレス:" #: ../src/netspeed.c:1301 #, c-format msgid "Do you want to disconnect %s now?" msgstr "今すぐ %s との接続を切りますか？" #: ../src/netspeed.c:1305 #, c-format msgid "Do you want to connect %s now?" msgstr "今すぐ %s と接続しますか？" #: ../src/netspeed.c:1573 msgid "Device _Details" msgstr "デバイスの詳細(_D)..." #: ../src/netspeed.c:1573 msgid "_Preferences..." msgstr "設定(_P)..." #: ../src/netspeed.c:1573 msgid "_Help" msgstr "ヘルプ(_H)" #: ../src/netspeed.c:1573 msgid "_About..." msgstr "情報(_A)..." netspeed_applet-0.16/po/uk.po0000644000175000017500000001345011402426203013127 00000000000000# Ukrainian translation of netspeed. # Copyright (C) 2009 netspeed's COPYRIGHT HOLDER # This file is distributed under the same license as the netspeed package. # Dmytro Shevchenko , 2009. # # Dmytro Shevchenko , 2009. msgid "" msgstr "" "Project-Id-Version: netspeed master\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2009-08-19 01:52+0300\n" "PO-Revision-Date: 2009-08-02 15:58+0300\n" "Last-Translator: Maxim Dziumanenko \n" "Language-Team: Ukrainian \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #: ../GNOME_NetspeedApplet.server.in.in.h:1 msgid "Internet" msgstr "Інтернет" #: ../GNOME_NetspeedApplet.server.in.in.h:2 msgid "Netspeed Applet" msgstr "Аплет Netspeed" #: ../GNOME_NetspeedApplet.server.in.in.h:3 msgid "Netspeed Applet Factory" msgstr "Фабрика аплету Netspeed" #: ../GNOME_NetspeedApplet.server.in.in.h:4 msgid "Network Monitor" msgstr "Монітор мережі" #: ../src/netspeed.c:407 msgid "b/s" msgstr "б/сек" #: ../src/netspeed.c:407 msgid "B/s" msgstr "Б/сек" #: ../src/netspeed.c:409 msgid "bits" msgstr "біт" #: ../src/netspeed.c:409 msgid "bytes" msgstr "байт" #: ../src/netspeed.c:416 msgid "kb/s" msgstr "кб/сек" #: ../src/netspeed.c:416 msgid "KiB/s" msgstr "КіБ/сек" #: ../src/netspeed.c:418 msgid "kb" msgstr "кб" #: ../src/netspeed.c:418 msgid "KiB" msgstr "КіБ" #: ../src/netspeed.c:427 msgid "Mb/s" msgstr "Мб/сек" #: ../src/netspeed.c:427 msgid "MiB/s" msgstr "МіБ/сек" #: ../src/netspeed.c:429 msgid "Mb" msgstr "Мб" #: ../src/netspeed.c:429 msgid "MiB" msgstr "Міб" #: ../src/netspeed.c:755 #, c-format msgid "" "There was an error displaying help:\n" "%s" msgstr "" "Помилка при показі довідки:\n" "%s" #: ../src/netspeed.c:806 #, c-format msgid "" "Failed to show:\n" "%s" msgstr "" "Не вдається показати:\n" "%s" #: ../src/netspeed.c:837 msgid "" "A little applet that displays some information on the traffic on the " "specified network device" msgstr "" "Невеличкий аплет, що відображає інформацію про трафік вказаного мережевого " "пристрою" #: ../src/netspeed.c:840 msgid "translator-credits" msgstr "Dmytro Shevchenko \nMaxim Dziumanenko " #: ../src/netspeed.c:842 msgid "Netspeed Website" msgstr "Вебсайт Netspeed" #: ../src/netspeed.c:968 msgid "Netspeed Preferences" msgstr "Параметри Netspeed" #: ../src/netspeed.c:991 msgid "General Settings" msgstr "Основні параметри" #: ../src/netspeed.c:1012 msgid "Network _device:" msgstr "Мережний _пристрій:" #. Default means device with default route set #: ../src/netspeed.c:1023 msgid "Default" msgstr "Типовий" #: ../src/netspeed.c:1036 msgid "Show _sum instead of in & out" msgstr "Показати _сумарний замість входу та виходу" #: ../src/netspeed.c:1040 msgid "Show _bits instead of bytes" msgstr "Показувати _біти замість байтів" #: ../src/netspeed.c:1044 msgid "Change _icon according to the selected device" msgstr "Міняти _значок відповідно до вибраного пристрою" #: ../src/netspeed.c:1155 #, c-format msgid "Device Details for %s" msgstr "Деталі пристрою для %s" #: ../src/netspeed.c:1181 msgid "_In graph color" msgstr "Колір графіку _вхідного трафіку" #: ../src/netspeed.c:1182 msgid "_Out graph color" msgstr "Колір графіку в_ихідного трафіку" #: ../src/netspeed.c:1198 msgid "Internet Address:" msgstr "Адреса у інтернет:" #: ../src/netspeed.c:1199 msgid "Netmask:" msgstr "Маска мережі:" #: ../src/netspeed.c:1200 msgid "Hardware Address:" msgstr "Апаратна адреса:" #: ../src/netspeed.c:1201 msgid "P-t-P Address:" msgstr "P-t-P адреса:" #: ../src/netspeed.c:1202 msgid "Bytes in:" msgstr "Байтів вх.:" #: ../src/netspeed.c:1203 msgid "Bytes out:" msgstr "Байтів вих.:" #: ../src/netspeed.c:1205 ../src/netspeed.c:1206 ../src/netspeed.c:1207 #: ../src/netspeed.c:1208 msgid "none" msgstr "немає" #: ../src/netspeed.c:1247 msgid "IPv6 Address:" msgstr "Адреса IPv6:" #: ../src/netspeed.c:1279 msgid "Signal Strength:" msgstr "Сила сигналу:" #: ../src/netspeed.c:1280 msgid "ESSID:" msgstr "ESSID:" #: ../src/netspeed.c:1366 #, c-format msgid "Do you want to disconnect %s now?" msgstr "Бажаєте відключитись від %s?" #: ../src/netspeed.c:1370 #, c-format msgid "Do you want to connect %s now?" msgstr "Бажаєте підключитись до %s?" #: ../src/netspeed.c:1444 #, c-format msgid "%s is down" msgstr "%s відключено" #: ../src/netspeed.c:1449 #, c-format msgid "" "%s: %s\n" "in: %s out: %s" msgstr "" "%s: %s\n" "вх: %s вих: %s" #: ../src/netspeed.c:1451 ../src/netspeed.c:1460 msgid "has no ip" msgstr "не має ip" #: ../src/netspeed.c:1458 #, c-format msgid "" "%s: %s\n" "sum: %s" msgstr "" "%s: %s\n" "сума: %s" #: ../src/netspeed.c:1467 #, c-format msgid "" "\n" "ESSID: %s\n" "Strength: %d %%" msgstr "" "\n" "ESSID: %s\n" "Сила: %d %%" #: ../src/netspeed.c:1468 msgid "unknown" msgstr "невідомо" #: ../src/netspeed.c:1515 msgid "Netspeed" msgstr "Netspeed" #: ../src/netspeed.c:1683 msgid "Device _Details" msgstr "_Подробиці про пристрій..." #: ../src/netspeed.c:1683 msgid "_Preferences..." msgstr "П_араметри..." #: ../src/netspeed.c:1683 msgid "_Help" msgstr "_Довідка" #: ../src/netspeed.c:1683 msgid "_About..." msgstr "_Про програму..." netspeed_applet-0.16/po/nb.po0000644000175000017500000001113211402426203013102 00000000000000# Norwegian (bokmål dialect) translation of the netspeed # Copyright (C) 1998, 1999 Free Software Foundation, Inc. # Kjartan Maraas , 1998-2008. # Eskild Hustvedt , 2007 # msgid "" msgstr "" "Project-Id-Version: netspeed\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2008-10-07 18:56+0200\n" "PO-Revision-Date: 2008-10-07 19:00+0200\n" "Last-Translator: Kjartan Maraas \n" "Language-Team: Norwegian \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8-bit\n" #: ../GNOME_NetspeedApplet.server.in.in.h:1 msgid "Internet" msgstr "Internett" #: ../GNOME_NetspeedApplet.server.in.in.h:2 msgid "Netspeed Applet" msgstr "Netspeed panelprogram" #: ../GNOME_NetspeedApplet.server.in.in.h:3 msgid "Netspeed Applet Factory" msgstr "" #: ../GNOME_NetspeedApplet.server.in.in.h:4 msgid "Network Monitor" msgstr "Nettverksovervåking" #: ../src/netspeed.c:407 msgid "b/s" msgstr "b/s" #: ../src/netspeed.c:407 msgid "B/s" msgstr "B/s" #: ../src/netspeed.c:409 msgid "bits" msgstr "bits" #: ../src/netspeed.c:409 msgid "bytes" msgstr "bytes" #: ../src/netspeed.c:416 msgid "kb/s" msgstr "kb/s" #: ../src/netspeed.c:416 msgid "KiB/s" msgstr "KiB/s" #: ../src/netspeed.c:418 msgid "kb" msgstr "kb" #: ../src/netspeed.c:418 msgid "KiB" msgstr "KiB" #: ../src/netspeed.c:427 msgid "Mb/s" msgstr "Mb/s" #: ../src/netspeed.c:427 msgid "MiB/s" msgstr "MiB/s" #: ../src/netspeed.c:429 msgid "Mb" msgstr "Mb" #: ../src/netspeed.c:429 msgid "MiB" msgstr "MiB" #: ../src/netspeed.c:755 #, c-format msgid "" "There was an error displaying help:\n" "%s" msgstr "" #: ../src/netspeed.c:806 #, c-format msgid "" "Failed to show:\n" "%s" msgstr "" "Klarte ikke å vise:\n" "%s" #: ../src/netspeed.c:837 msgid "" "A little applet that displays some information on the traffic on the " "specified network device" msgstr "" #: ../src/netspeed.c:840 msgid "translator-credits" msgstr "Kjartan Maraas " #: ../src/netspeed.c:842 msgid "Netspeed Website" msgstr "" #: ../src/netspeed.c:968 msgid "Netspeed Preferences" msgstr "Brukervalg for Netspeed" #: ../src/netspeed.c:991 msgid "General Settings" msgstr "Generelle innstillinger" #: ../src/netspeed.c:1012 msgid "Network _device:" msgstr "Nettverks_enhet:" #. Default means device with default route set #: ../src/netspeed.c:1023 msgid "Default" msgstr "Forvalg" #: ../src/netspeed.c:1036 msgid "Show _sum instead of in & out" msgstr "" #: ../src/netspeed.c:1040 msgid "Show _bits instead of bytes" msgstr "" #: ../src/netspeed.c:1044 msgid "Change _icon according to the selected device" msgstr "" #: ../src/netspeed.c:1155 #, c-format msgid "Device Details for %s" msgstr "" #: ../src/netspeed.c:1181 msgid "_In graph color" msgstr "" #: ../src/netspeed.c:1182 msgid "_Out graph color" msgstr "" #: ../src/netspeed.c:1198 #, fuzzy msgid "Internet Address:" msgstr "Internettadresse" #: ../src/netspeed.c:1199 msgid "Netmask:" msgstr "Nettverksmaske:" #: ../src/netspeed.c:1200 #, fuzzy msgid "Hardware Address:" msgstr "Maskinvare-adresse:" #: ../src/netspeed.c:1201 #, fuzzy msgid "P-t-P Address:" msgstr "IP-adresse:" #: ../src/netspeed.c:1202 #, fuzzy msgid "Bytes in:" msgstr "Bytes" #: ../src/netspeed.c:1203 #, fuzzy msgid "Bytes out:" msgstr "Bytes" #: ../src/netspeed.c:1205 ../src/netspeed.c:1206 ../src/netspeed.c:1207 #: ../src/netspeed.c:1208 msgid "none" msgstr "ingen" #: ../src/netspeed.c:1247 #, fuzzy msgid "IPV6 Address:" msgstr "IP-adresse:" #: ../src/netspeed.c:1279 msgid "Signal Strength:" msgstr "" #: ../src/netspeed.c:1280 msgid "ESSID:" msgstr "ESSID:" #: ../src/netspeed.c:1366 #, c-format msgid "Do you want to disconnect %s now?" msgstr "" #: ../src/netspeed.c:1370 #, c-format msgid "Do you want to connect %s now?" msgstr "" #: ../src/netspeed.c:1444 #, c-format msgid "%s is down" msgstr "%s er nede" #: ../src/netspeed.c:1449 #, c-format msgid "" "%s: %s\n" "in: %s out: %s" msgstr "" #: ../src/netspeed.c:1451 ../src/netspeed.c:1460 msgid "has no ip" msgstr "har ingen ip" #: ../src/netspeed.c:1458 #, c-format msgid "" "%s: %s\n" "sum: %s" msgstr "" #: ../src/netspeed.c:1467 #, c-format msgid "" "\n" "ESSID: %s\n" "Strength: %d %%" msgstr "" #: ../src/netspeed.c:1468 msgid "unknown" msgstr "ukjent" #: ../src/netspeed.c:1515 msgid "Netspeed" msgstr "Netspeed" #: ../src/netspeed.c:1683 #, fuzzy msgid "Device _Details" msgstr "Detaljer" #: ../src/netspeed.c:1683 msgid "_Preferences..." msgstr "_Brukervalg..." #: ../src/netspeed.c:1683 msgid "_Help" msgstr "_Hjelp" #: ../src/netspeed.c:1683 msgid "_About..." msgstr "_Om..." netspeed_applet-0.16/po/ps.po0000644000175000017500000001330011402426203013124 00000000000000# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # msgid "" msgstr "" "Project-Id-Version: Gnome - Netspeed\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2008-05-04 04:03+0000\n" "PO-Revision-Date: 2008-07-05 16:42-0800\n" "Last-Translator: Zabeeh Khan \n" "Language-Team: Pashto \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=utf-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Poedit-Language: Pashto, Pushto\n" "X-Poedit-Country: AFGHANISTAN\n" #: ../GNOME_NetspeedApplet.server.in.in.h:1 msgid "Internet" msgstr "اېنټرنېټ" #: ../GNOME_NetspeedApplet.server.in.in.h:2 msgid "Netspeed Applet" msgstr "نېټسپيډ څېرمه کړنلار" #: ../GNOME_NetspeedApplet.server.in.in.h:3 msgid "Netspeed Applet Factory" msgstr "نېټسپيډ څېرمه کړنلار فېکټري" #: ../GNOME_NetspeedApplet.server.in.in.h:4 msgid "Network Monitor" msgstr "ځال ليدانی" #: ../src/netspeed.c:400 msgid "b/s" msgstr "ب/س" #: ../src/netspeed.c:400 msgid "B/s" msgstr "ب/س" #: ../src/netspeed.c:402 msgid "bits" msgstr "بېټه" #: ../src/netspeed.c:402 msgid "bytes" msgstr "باېټه" #: ../src/netspeed.c:409 msgid "kb/s" msgstr "ک.ب/س" #: ../src/netspeed.c:409 msgid "KiB/s" msgstr "ک ا ب/سېکېنډ" #: ../src/netspeed.c:411 msgid "kb" msgstr "ک.ب" #: ../src/netspeed.c:411 msgid "KiB" msgstr "ک ا ب" #: ../src/netspeed.c:420 msgid "Mb/s" msgstr "م.ب/س" #: ../src/netspeed.c:420 msgid "MiB/s" msgstr "م ا ب/سېکېنډ" #: ../src/netspeed.c:422 msgid "Mb" msgstr "م.ب" #: ../src/netspeed.c:422 msgid "MiB" msgstr "م ا ب" #: ../src/netspeed.c:628 #, c-format msgid "" "%s: %s\n" "in: %s out: %s" msgstr "" "%s: %s\n" "%s :بهر %s :دننه" #: ../src/netspeed.c:630 #: ../src/netspeed.c:636 msgid "has no ip" msgstr "اېنټرنېټ باندره نه لري" #: ../src/netspeed.c:634 #, c-format msgid "" "%s: %s\n" "sum: %s" msgstr "" "%s: %s\n" "%s :ټول" #: ../src/netspeed.c:647 #, c-format msgid "%s is down" msgstr "بند دی %s" #: ../src/netspeed.c:657 #, c-format msgid "" "%s\n" "ESSID: %s\n" "Strength: %d %%" msgstr "" "%s\n" "ESSID: %s\n" "%d %% :ځواک" #: ../src/netspeed.c:658 msgid "unknown" msgstr "ناپېژندلی" #: ../src/netspeed.c:769 #, c-format msgid "" "There was an error displaying help:\n" "%s" msgstr "" ":د مرستې په ښودلو کې کومه تېروتنه پېښه شوه\n" "%s" #: ../src/netspeed.c:820 #, c-format msgid "" "Failed to show:\n" "%s" msgstr "" ":ښودلو کې پاتې راغی\n" "%s" #: ../src/netspeed.c:851 msgid "A little applet that displays some information on the traffic on the specified network device" msgstr "يوه وړه څېرمه کړنلار چې د ټاکل شوې ځال وزلې په اړه ټرافيکي خبرتياوې ښيي" #: ../src/netspeed.c:854 msgid "translator-credits" msgstr "" "Zabeeh Khan \n" "Pathanisation Project " #: ../src/netspeed.c:856 msgid "Netspeed Website" msgstr "د نېټسپيډ ګورتپاڼه" #: ../src/netspeed.c:987 msgid "Netspeed Preferences" msgstr "د نېټسپيډ غوراوي" #: ../src/netspeed.c:1010 msgid "General Settings" msgstr "ټولګړي امستنې" #: ../src/netspeed.c:1031 msgid "Network _device:" msgstr ":ځال _وزله" #: ../src/netspeed.c:1052 msgid "Show _sum instead of in & out" msgstr "د دننه او بهر په ځای _ټول ښودل" #: ../src/netspeed.c:1056 msgid "Show _bits instead of bytes" msgstr "د باېټونو په ځای _بېټونه ښودل" #: ../src/netspeed.c:1060 msgid "Change _icon according to the selected device" msgstr "د ټاکل شوې وزلې له مخې _انځورن بدلول" #: ../src/netspeed.c:1065 msgid "_Always monitor a connected device, if possible" msgstr "که چېرې شونې وي، تل پېوسته شوې وزله څارل_" #: ../src/netspeed.c:1179 #, c-format msgid "Device Details for %s" msgstr "وزله خبرتياوې %s د" #: ../src/netspeed.c:1205 msgid "_In graph color" msgstr "دننني کښنيز رنګ_" #: ../src/netspeed.c:1206 msgid "_Out graph color" msgstr "بهرني کښنيز رنګ_" #: ../src/netspeed.c:1222 msgid "Internet Address:" msgstr ":اېنټرنېټ پته" #: ../src/netspeed.c:1223 msgid "Netmask:" msgstr ":نېټوربوزۍ" #: ../src/netspeed.c:1224 msgid "Hardware Address:" msgstr ":هډوتري پته" #: ../src/netspeed.c:1225 msgid "P-t-P Address:" msgstr ":پته P-t-P" #: ../src/netspeed.c:1226 msgid "Bytes in:" msgstr ":باېټه دننه" #: ../src/netspeed.c:1227 msgid "Bytes out:" msgstr ":باېټه بهر" #: ../src/netspeed.c:1229 #: ../src/netspeed.c:1230 #: ../src/netspeed.c:1231 #: ../src/netspeed.c:1232 msgid "none" msgstr "هېڅ" #: ../src/netspeed.c:1271 msgid "IPV6 Address:" msgstr ":پته IPV6" #: ../src/netspeed.c:1303 msgid "Signal Strength:" msgstr ":د سګنل ځواک" #: ../src/netspeed.c:1304 msgid "ESSID:" msgstr "ESSID:" #: ../src/netspeed.c:1390 #, c-format msgid "Do you want to disconnect %s now?" msgstr "همدا اوس ناپېوستول غواړﺉ؟ %s" #: ../src/netspeed.c:1394 #, c-format msgid "Do you want to connect %s now?" msgstr "همدا اوس پېوستول غواړﺉ؟ %s" #: ../src/netspeed.c:1490 msgid "Netspeed" msgstr "نېټسپيډ" #: ../src/netspeed.c:1660 msgid "Device _Details" msgstr "وزله _خبرتياوې" #: ../src/netspeed.c:1660 msgid "_Preferences..." msgstr "...غوراوي_" #: ../src/netspeed.c:1660 msgid "_Help" msgstr "مرسته_" #: ../src/netspeed.c:1660 msgid "_About..." msgstr "...په اړه_" netspeed_applet-0.16/po/eu.po0000644000175000017500000001242611402426203013123 00000000000000# translation of eu.po to Basque # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # # Iñaki Larrañaga Murgoitio , 2008, 2009. msgid "" msgstr "" "Project-Id-Version: eu\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2009-09-04 12:22+0200\n" "PO-Revision-Date: 2009-09-04 12:22+0200\n" "Last-Translator: Iñaki Larrañaga Murgoitio \n" "Language-Team: Basque \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.11.4\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" #: ../GNOME_NetspeedApplet.server.in.in.h:1 msgid "Internet" msgstr "Internet" #: ../GNOME_NetspeedApplet.server.in.in.h:2 msgid "Netspeed Applet" msgstr "Netspeed applet-a" #: ../GNOME_NetspeedApplet.server.in.in.h:3 msgid "Netspeed Applet Factory" msgstr "Netspeed applet-aren faktoria" #: ../GNOME_NetspeedApplet.server.in.in.h:4 msgid "Network Monitor" msgstr "Sareko monitorea" #: ../src/netspeed.c:407 msgid "b/s" msgstr "b/s" #: ../src/netspeed.c:407 msgid "B/s" msgstr "B/s" #: ../src/netspeed.c:409 msgid "bits" msgstr "bit" #: ../src/netspeed.c:409 msgid "bytes" msgstr "byte" #: ../src/netspeed.c:416 msgid "kb/s" msgstr "kb/s" #: ../src/netspeed.c:416 msgid "KiB/s" msgstr "KiB/s" #: ../src/netspeed.c:418 msgid "kb" msgstr "kb" #: ../src/netspeed.c:418 msgid "KiB" msgstr "KiB" #: ../src/netspeed.c:427 msgid "Mb/s" msgstr "Mb/s" #: ../src/netspeed.c:427 msgid "MiB/s" msgstr "MiB/s" #: ../src/netspeed.c:429 msgid "Mb" msgstr "Mb" #: ../src/netspeed.c:429 msgid "MiB" msgstr "MiB" #: ../src/netspeed.c:755 #, c-format msgid "" "There was an error displaying help:\n" "%s" msgstr "" "Errorea gertatu da laguntza bistaratzean:\n" "%s" #: ../src/netspeed.c:806 #, c-format msgid "" "Failed to show:\n" "%s" msgstr "" "Huts egin du erakustean:\n" "%s" #: ../src/netspeed.c:837 msgid "" "A little applet that displays some information on the traffic on the " "specified network device" msgstr "" "Applet txiki bat zehaztutako sareko gailu bateko trafikoaren informazioa " "bistaratzeko" #: ../src/netspeed.c:840 msgid "translator-credits" msgstr "Inaki Larranaga Murgoitio " #: ../src/netspeed.c:842 msgid "Netspeed Website" msgstr "Netspeed-en web gunea " #: ../src/netspeed.c:968 msgid "Netspeed Preferences" msgstr "Netspeed-en hobespenak " #: ../src/netspeed.c:991 msgid "General Settings" msgstr "Ezarpen orokorrak" #: ../src/netspeed.c:1012 msgid "Network _device:" msgstr "Sareko _gailua:" #. Default means device with default route set #: ../src/netspeed.c:1023 msgid "Default" msgstr "Lehenetsia" #: ../src/netspeed.c:1036 msgid "Show _sum instead of in & out" msgstr "Erakutsi _batura (sarrera eta irteeraren ordez)" #: ../src/netspeed.c:1040 msgid "Show _bits instead of bytes" msgstr "Erakutsi _bit-ak (byte-en ordez)" #: ../src/netspeed.c:1044 msgid "Change _icon according to the selected device" msgstr "Aldatu _ikonoa hautatutako gailuaren arabera" #: ../src/netspeed.c:1155 #, c-format msgid "Device Details for %s" msgstr "%s gailuaren xehetasunak" #: ../src/netspeed.c:1181 msgid "_In graph color" msgstr "_Sarrerako grafikoaren kolorea" #: ../src/netspeed.c:1182 msgid "_Out graph color" msgstr "_Irteerako grafikoaren kolorea" #: ../src/netspeed.c:1198 msgid "Internet Address:" msgstr "Interneteko helbidea:" #: ../src/netspeed.c:1199 msgid "Netmask:" msgstr "Sare-maskara:" #: ../src/netspeed.c:1200 msgid "Hardware Address:" msgstr "Hardwarearen helbidea:" #: ../src/netspeed.c:1201 msgid "P-t-P Address:" msgstr "Puntuz puntuko helbidea:" #: ../src/netspeed.c:1202 msgid "Bytes in:" msgstr "Bidalitako byteak:" #: ../src/netspeed.c:1203 msgid "Bytes out:" msgstr "Jasotako byteak:" #: ../src/netspeed.c:1205 ../src/netspeed.c:1206 ../src/netspeed.c:1207 #: ../src/netspeed.c:1208 msgid "none" msgstr "bat ere ez" #: ../src/netspeed.c:1247 msgid "IPv6 Address:" msgstr "IPv6 helbidea:" #: ../src/netspeed.c:1279 msgid "Signal Strength:" msgstr "Seinalearen indarra:" #: ../src/netspeed.c:1280 msgid "ESSID:" msgstr "ESSID:" #: ../src/netspeed.c:1366 #, c-format msgid "Do you want to disconnect %s now?" msgstr "Nahi duzu %s orain deskonektatzea?" #: ../src/netspeed.c:1370 #, c-format msgid "Do you want to connect %s now?" msgstr "Nahi duzu %s orain konektatzea?" #: ../src/netspeed.c:1444 #, c-format msgid "%s is down" msgstr "%s erorita dago" #: ../src/netspeed.c:1449 #, c-format msgid "" "%s: %s\n" "in: %s out: %s" msgstr "" "%s: %s\n" "sarrera: %s irteera: %s" #: ../src/netspeed.c:1451 ../src/netspeed.c:1460 msgid "has no ip" msgstr "ez du IPrik" #: ../src/netspeed.c:1458 #, c-format msgid "" "%s: %s\n" "sum: %s" msgstr "" "%s: %s\n" "batura: %s" #: ../src/netspeed.c:1467 #, c-format msgid "" "\n" "ESSID: %s\n" "Strength: %d %%" msgstr "" "\n" "ESSID: %s\n" "Indarra: %% %d" #: ../src/netspeed.c:1468 msgid "unknown" msgstr "ezezaguna" #: ../src/netspeed.c:1515 msgid "Netspeed" msgstr "Netspeed" #: ../src/netspeed.c:1683 msgid "Device _Details" msgstr "Gailuaren _xehetasunak" #: ../src/netspeed.c:1683 msgid "_Preferences..." msgstr "_Hobespenak..." #: ../src/netspeed.c:1683 msgid "_Help" msgstr "_Laguntza" #: ../src/netspeed.c:1683 msgid "_About..." msgstr "Honi _buruz..." netspeed_applet-0.16/po/nl.po0000644000175000017500000001314411402426203013121 00000000000000# Dutch translation of Netspeed-applet. # Copyright (C) 2002 Free Software Foundation, Inc. # # Vincent van Adrighem , 2002. # Wouter Bolsterlee , 2006. # msgid "" msgstr "" "Project-Id-Version: Netspeedapplet 0.4\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2006-09-29 12:31+0200\n" "PO-Revision-Date: 2006-09-29 12:31+0200 \n" "Last-Translator: Wouter Bolsterlee \n" "Language-Team: Dutch \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #: ../GNOME_NetspeedApplet.server.in.in.h:1 msgid "Internet" msgstr "Internet" #: ../GNOME_NetspeedApplet.server.in.in.h:2 msgid "Netspeed Applet" msgstr "Netspeed-applet" #: ../GNOME_NetspeedApplet.server.in.in.h:3 msgid "Netspeed Applet Factory" msgstr "Netspeed-appletfabriek" #: ../GNOME_NetspeedApplet.server.in.in.h:4 msgid "Network Monitor" msgstr "Netwerkgebruik" #: ../src/netspeed.c:279 msgid "b/s" msgstr "b/s" #: ../src/netspeed.c:279 msgid "B/s" msgstr "B/s" #: ../src/netspeed.c:281 msgid "bits" msgstr "bits" #: ../src/netspeed.c:281 msgid "bytes" msgstr "bytes" #: ../src/netspeed.c:288 msgid "kb/s" msgstr "kb/s" #: ../src/netspeed.c:288 msgid "KiB/s" msgstr "KiB/s" #: ../src/netspeed.c:290 msgid "kb" msgstr "kb" #: ../src/netspeed.c:290 msgid "KiB" msgstr "KiB" #: ../src/netspeed.c:299 msgid "Mb/s" msgstr "Mb/s" #: ../src/netspeed.c:299 msgid "MiB/s" msgstr "MiB/s" #: ../src/netspeed.c:301 msgid "Mb" msgstr "Mb" #: ../src/netspeed.c:301 msgid "MiB" msgstr "MiB" #: ../src/netspeed.c:502 #, c-format msgid "" "%s: %s\n" "in: %s out: %s" msgstr "" "%s: %s\n" "in: %s uit: %s" #: ../src/netspeed.c:504 ../src/netspeed.c:510 msgid "has no ip" msgstr "heeft geen ip" #: ../src/netspeed.c:508 #, c-format msgid "" "%s: %s\n" "sum: %s" msgstr "" "%s: %s\n" "totaal: %s" #: ../src/netspeed.c:521 #, c-format msgid "%s is down" msgstr "%s is niet in gebruik" #: ../src/netspeed.c:645 msgid "Netspeed Website" msgstr "Netspeed-website" #: ../src/netspeed.c:654 msgid "Netspeed" msgstr "Netspeed" #: ../src/netspeed.c:657 msgid "" "A little applet that displays some information on the traffic on the " "specified network device" msgstr "" "Een klein applet die informatie weergeeft over de gegevensstroom door een " "netwerkapparaat." #: ../src/netspeed.c:660 msgid "translator-credits" msgstr "" "Vincent van Adrighem\n" "Wouter Bolsterlee\n" "\n" "Kijk voor meer informatie op http://nl.gnome.org/" #: ../src/netspeed.c:713 #, c-format msgid "" "There was an error displaying help:\n" "%s" msgstr "" "Er was een probleem bij het tonen van de hulp:\n" "%s" #: ../src/netspeed.c:855 msgid "Netspeed Preferences" msgstr "Netspeed-voorkeuren" #: ../src/netspeed.c:878 msgid "General Settings" msgstr "Algemene instellingen:" #: ../src/netspeed.c:899 msgid "Network _device:" msgstr "Netwerk_apparaat:" #: ../src/netspeed.c:923 msgid "_Update interval:" msgstr "_Verversingsinterval:" #: ../src/netspeed.c:939 msgid "millisecond" msgstr "milliseconde" #: ../src/netspeed.c:948 msgid "Label _font size:" msgstr "Lettergrootte van label:" #: ../src/netspeed.c:964 msgid "points" msgstr "punten" #: ../src/netspeed.c:970 msgid "Show _sum instead of in & out" msgstr "_Totaal weergeven in plaats van in & uit" #: ../src/netspeed.c:974 msgid "Show _bits instead of bytes" msgstr "_Bits in plaats van bytes weergeven" #: ../src/netspeed.c:978 msgid "Change _icon according to the selected device" msgstr "_Pictogram aanpassen aan het type apparaat" #: ../src/netspeed.c:983 msgid "_Always monitor a connected device, if possible" msgstr "_Altijd een verbonden apparaat monitoren, indien mogelijk" #: ../src/netspeed.c:1102 #, c-format msgid "Device Details for %s" msgstr "Apparaatgegevens voor %s" #: ../src/netspeed.c:1128 msgid "_In graph color" msgstr "Kleur _inkomende grafiek" #: ../src/netspeed.c:1129 msgid "_Out graph color" msgstr "Kleur _uitgaande grafiek" #: ../src/netspeed.c:1145 msgid "Internet Address:" msgstr "Internetadres:" #: ../src/netspeed.c:1146 msgid "Netmask:" msgstr "Netmasker:" #: ../src/netspeed.c:1147 msgid "Hardware Address:" msgstr "Hardware-adres:" #: ../src/netspeed.c:1148 msgid "P-t-P Address:" msgstr "P-t-P adres:" #: ../src/netspeed.c:1149 msgid "Bytes in:" msgstr "Bytes in:" #: ../src/netspeed.c:1150 msgid "Bytes out:" msgstr "Bytes uit:" #: ../src/netspeed.c:1152 ../src/netspeed.c:1153 ../src/netspeed.c:1154 #: ../src/netspeed.c:1155 msgid "none" msgstr "geen" #: ../src/netspeed.c:1194 msgid "IPV6 Address:" msgstr "IPv6-adres:" #: ../src/netspeed.c:1301 #, c-format msgid "Do you want to disconnect %s now?" msgstr "Wilt u de verbinding %s verbreken?" #: ../src/netspeed.c:1305 #, c-format msgid "Do you want to connect %s now?" msgstr "Wilt u met %s verbinden?" #: ../src/netspeed.c:1573 msgid "Device _Details" msgstr "_Apparaatgegevens" #: ../src/netspeed.c:1573 msgid "_Preferences..." msgstr "_Voorkeuren..." #: ../src/netspeed.c:1573 msgid "_Help" msgstr "_Hulp" #: ../src/netspeed.c:1573 msgid "_About..." msgstr "_Info..." #~ msgid "kB/s" #~ msgstr "kB/s" #~ msgid "kbyte" #~ msgstr "kbyte" #~ msgid "Mbyte" #~ msgstr "Mbyte" #~ msgid "TRANSLATORS" #~ msgstr "Vincent van Adrighem " #~ msgid "Netspeed Applet Settings" #~ msgstr "Netspeed-applet instellingen" #~ msgid "Device %s" #~ msgstr "Apparaat %s" #~ msgid "Refreshes per second:" #~ msgstr "Verversingen per seconde:" #~ msgid "0 b/s" #~ msgstr "0 b/s" #~ msgid "%3.1lu b/s" #~ msgstr "%3.1lu b/s" #~ msgid "%3.1f kb/s" #~ msgstr "%3.1f kb/s" #~ msgid "%3.0f kb/s" #~ msgstr "%3.0f kb/s" #~ msgid "%3.1f Mb/s" #~ msgstr "%3.1f Mb/s" netspeed_applet-0.16/po/pt_BR.po0000644000175000017500000001353311402426203013520 00000000000000# Brazilian Portuguese translation of netspeed. # This file is distributed under the same license as the netspeed package. # Leonardo Gregianin , 2006-2008. # Fábio Nogueira , 2008. # msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2009-08-25 21:38-0400\n" "PO-Revision-Date: 2009-08-25 22:23-0300\n" "Last-Translator: Djavan Fagundes \n" "Language-Team: Brazilian Portuguese \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #: ../GNOME_NetspeedApplet.server.in.in.h:1 msgid "Internet" msgstr "Internet" #: ../GNOME_NetspeedApplet.server.in.in.h:2 msgid "Netspeed Applet" msgstr "Miniaplicativo Netspeed" #: ../GNOME_NetspeedApplet.server.in.in.h:3 msgid "Netspeed Applet Factory" msgstr "Fábrica do miniaplicativo Netspeed" #: ../GNOME_NetspeedApplet.server.in.in.h:4 msgid "Network Monitor" msgstr "Monitor de rede" #: ../src/netspeed.c:407 msgid "b/s" msgstr "b/s" #: ../src/netspeed.c:407 msgid "B/s" msgstr "B/s" #: ../src/netspeed.c:409 msgid "bits" msgstr "bits" #: ../src/netspeed.c:409 msgid "bytes" msgstr "bytes" #: ../src/netspeed.c:416 msgid "kb/s" msgstr "kb/s" #: ../src/netspeed.c:416 msgid "KiB/s" msgstr "KiB/s" #: ../src/netspeed.c:418 msgid "kb" msgstr "kb" #: ../src/netspeed.c:418 msgid "KiB" msgstr "KiB" #: ../src/netspeed.c:427 msgid "Mb/s" msgstr "Mb/s" #: ../src/netspeed.c:427 msgid "MiB/s" msgstr "MiB/s" #: ../src/netspeed.c:429 msgid "Mb" msgstr "Mb" #: ../src/netspeed.c:429 msgid "MiB" msgstr "MiB" #: ../src/netspeed.c:755 #, c-format msgid "" "There was an error displaying help:\n" "%s" msgstr "" "Houve um erro ao exibir a ajuda:\n" "%s" #: ../src/netspeed.c:806 #, c-format msgid "" "Failed to show:\n" "%s" msgstr "" "Falhou ao exibir:\n" "%s" #: ../src/netspeed.c:837 msgid "" "A little applet that displays some information on the traffic on the " "specified network device" msgstr "" "Um miniaplicativo para exibir algumas informações sobre o tráfego no " "dispositivo de rede especificado" #: ../src/netspeed.c:840 msgid "translator-credits" msgstr "" "Leonardo Gregianin \n" "Fábio Nogueira \n" "Djavan Fagundes " #: ../src/netspeed.c:842 msgid "Netspeed Website" msgstr "Site do Netspeed" #: ../src/netspeed.c:968 msgid "Netspeed Preferences" msgstr "Preferências do Netspeed" #: ../src/netspeed.c:991 msgid "General Settings" msgstr "Configurações gerais" #: ../src/netspeed.c:1012 msgid "Network _device:" msgstr "_Dispositivo de rede:" #. Default means device with default route set #: ../src/netspeed.c:1023 msgid "Default" msgstr "Padrão" #: ../src/netspeed.c:1036 msgid "Show _sum instead of in & out" msgstr "Mostrar _soma em vez de entrada e saída" #: ../src/netspeed.c:1040 msgid "Show _bits instead of bytes" msgstr "Mostrar _bits ao invés de bytes" #: ../src/netspeed.c:1044 msgid "Change _icon according to the selected device" msgstr "_Alterar ícone de acordo com o disposito especificado" #: ../src/netspeed.c:1155 #, c-format msgid "Device Details for %s" msgstr "Detalhes do dispositivo %s" #: ../src/netspeed.c:1181 msgid "_In graph color" msgstr "Cor do gráfico de _entrada" #: ../src/netspeed.c:1182 msgid "_Out graph color" msgstr "Cor do gráfico de _saída" #: ../src/netspeed.c:1198 msgid "Internet Address:" msgstr "Endereço de internet:" #: ../src/netspeed.c:1199 msgid "Netmask:" msgstr "Máscara de rede:" #: ../src/netspeed.c:1200 msgid "Hardware Address:" msgstr "Endereço de hardware:" #: ../src/netspeed.c:1201 msgid "P-t-P Address:" msgstr "Endereço de P-t-P:" #: ../src/netspeed.c:1202 msgid "Bytes in:" msgstr "Bytes de entrada:" #: ../src/netspeed.c:1203 msgid "Bytes out:" msgstr "Bytes de saída:" #: ../src/netspeed.c:1205 ../src/netspeed.c:1206 ../src/netspeed.c:1207 #: ../src/netspeed.c:1208 msgid "none" msgstr "nenhum" #: ../src/netspeed.c:1247 msgid "IPv6 Address:" msgstr "Endereço IPv6:" #: ../src/netspeed.c:1279 msgid "Signal Strength:" msgstr "Intensidade do sinal:" #: ../src/netspeed.c:1280 msgid "ESSID:" msgstr "ESSID:" #: ../src/netspeed.c:1366 #, c-format msgid "Do you want to disconnect %s now?" msgstr "Você quer desconectar %s agora?" #: ../src/netspeed.c:1370 #, c-format msgid "Do you want to connect %s now?" msgstr "Você quer se conectar %s agora?" #: ../src/netspeed.c:1444 #, c-format msgid "%s is down" msgstr "%s está fora do ar" #: ../src/netspeed.c:1449 #, c-format msgid "" "%s: %s\n" "in: %s out: %s" msgstr "" "%s :%s\n" "entrada: %s saída: %s" #: ../src/netspeed.c:1451 ../src/netspeed.c:1460 msgid "has no ip" msgstr "nenhum IP" #: ../src/netspeed.c:1458 #, c-format msgid "" "%s: %s\n" "sum: %s" msgstr "" "%s: %s\n" "soma: %s" #: ../src/netspeed.c:1467 #, c-format msgid "" "\n" "ESSID: %s\n" "Strength: %d %%" msgstr "" "\n" "ESSID: %s\n" "Intensidade: %d %%" #: ../src/netspeed.c:1468 msgid "unknown" msgstr "desconhecido" #: ../src/netspeed.c:1515 msgid "Netspeed" msgstr "Netspeed" #: ../src/netspeed.c:1683 msgid "Device _Details" msgstr "_Detalhes do dispositivo" #: ../src/netspeed.c:1683 msgid "_Preferences..." msgstr "_Preferências..." #: ../src/netspeed.c:1683 msgid "_Help" msgstr "Aj_uda" #: ../src/netspeed.c:1683 msgid "_About..." msgstr "_Sobre..." #~ msgid "_Always monitor a connected device, if possible" #~ msgstr "_Sempre monitorar um dispositivo conectado, se possível" #~ msgid "kB/s" #~ msgstr "kB/s" #~ msgid "kbyte" #~ msgstr "kbyte" #~ msgid "Mbyte" #~ msgstr "Mbyte" #~ msgid "TRANSLATORS" #~ msgstr "" #~ "Leonardo Gregianin /nFábio Nogueira " #~ msgid "_Update interval:" #~ msgstr "Intervalo de _atualizando:" #~ msgid "millisecond" #~ msgstr "milisegundos" #~ msgid "Label _font size:" #~ msgstr "Tamanho da _fonte:" netspeed_applet-0.16/po/pt.po0000644000175000017500000001272611402426203013140 00000000000000# Netspeed-applet's portuguese translation # Copyright © 2008, 2009 Netspeed-applet # This file is distributed under the same license as the Netspeed-applet package. # # António Lima , 2008, 2009. # msgid "" msgstr "" "Project-Id-Version: 2.22\n" "Report-Msgid-Bugs-To: http://bugzilla.gnome.org/enter_bug.cgi?" "product=netspeed&component=general\n" "POT-Creation-Date: 2009-04-27 05:43+0000\n" "PO-Revision-Date: 2009-05-17 16:48+0000\n" "Last-Translator: António Lima \n" "Language-Team: Portuguese \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=utf-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Poedit-Language: Portuguese\n" "X-Poedit-Country: PORTUGAL\n" #: ../GNOME_NetspeedApplet.server.in.in.h:1 msgid "Internet" msgstr "Internet" #: ../GNOME_NetspeedApplet.server.in.in.h:2 msgid "Netspeed Applet" msgstr "Netspeed Applet" #: ../GNOME_NetspeedApplet.server.in.in.h:3 msgid "Netspeed Applet Factory" msgstr "Fábrica Netspeed Applet" #: ../GNOME_NetspeedApplet.server.in.in.h:4 msgid "Network Monitor" msgstr "Monitor de Rede" #: ../src/netspeed.c:407 msgid "b/s" msgstr "b/s" #: ../src/netspeed.c:407 msgid "B/s" msgstr "B/s" #: ../src/netspeed.c:409 msgid "bits" msgstr "bits" #: ../src/netspeed.c:409 msgid "bytes" msgstr "bytes" #: ../src/netspeed.c:416 msgid "kb/s" msgstr "kb/s" #: ../src/netspeed.c:416 msgid "KiB/s" msgstr "KiB/s" #: ../src/netspeed.c:418 msgid "kb" msgstr "kb" #: ../src/netspeed.c:418 msgid "KiB" msgstr "KiB" #: ../src/netspeed.c:427 msgid "Mb/s" msgstr "Mb/s" #: ../src/netspeed.c:427 msgid "MiB/s" msgstr "MiB/s" #: ../src/netspeed.c:429 msgid "Mb" msgstr "Mb" #: ../src/netspeed.c:429 msgid "MiB" msgstr "MiB" #: ../src/netspeed.c:755 #, c-format msgid "" "There was an error displaying help:\n" "%s" msgstr "" "Ocorreu um erro ao apresentar a ajuda:\n" "%s" #: ../src/netspeed.c:806 #, c-format msgid "" "Failed to show:\n" "%s" msgstr "" "Falha ao apresentar:\n" "%s" #: ../src/netspeed.c:837 msgid "" "A little applet that displays some information on the traffic on the " "specified network device" msgstr "" "Uma pequena applet que apresenta alguma informação sobre o tráfego no " "dispositivo de rede especificado" #: ../src/netspeed.c:840 msgid "translator-credits" msgstr "António Lima " #: ../src/netspeed.c:842 msgid "Netspeed Website" msgstr "Página Web do Netspeed" #: ../src/netspeed.c:968 msgid "Netspeed Preferences" msgstr "Preferências do Netspeed" #: ../src/netspeed.c:991 msgid "General Settings" msgstr "Configurações Gerais" #: ../src/netspeed.c:1012 msgid "Network _device:" msgstr "_Dispositivo de rede:" #. Default means device with default route set #: ../src/netspeed.c:1023 msgid "Default" msgstr "Por omissão" #: ../src/netspeed.c:1036 msgid "Show _sum instead of in & out" msgstr "Apresenta a _soma em vez de recebido & enviado" #: ../src/netspeed.c:1040 msgid "Show _bits instead of bytes" msgstr "Apresenta _bits em vez de bytes" #: ../src/netspeed.c:1044 msgid "Change _icon according to the selected device" msgstr "Altera o íc_one de acordo com o dispositivo seleccionado" #: ../src/netspeed.c:1155 #, c-format msgid "Device Details for %s" msgstr "Detalhes do Dispositivo para %s" #: ../src/netspeed.c:1181 msgid "_In graph color" msgstr "Cor do gráfico de _recebido" #: ../src/netspeed.c:1182 msgid "_Out graph color" msgstr "Cor do gráfico de _enviado" #: ../src/netspeed.c:1198 msgid "Internet Address:" msgstr "Endereço da Internet:" #: ../src/netspeed.c:1199 msgid "Netmask:" msgstr "Máscara de Rede:" #: ../src/netspeed.c:1200 msgid "Hardware Address:" msgstr "Endereço do Hardware:" #: ../src/netspeed.c:1201 msgid "P-t-P Address:" msgstr "Endereço P-t-P:" #: ../src/netspeed.c:1202 msgid "Bytes in:" msgstr "Bytes recebidos:" #: ../src/netspeed.c:1203 msgid "Bytes out:" msgstr "Bytes enviados:" #: ../src/netspeed.c:1205 ../src/netspeed.c:1206 ../src/netspeed.c:1207 #: ../src/netspeed.c:1208 msgid "none" msgstr "nenhum" #: ../src/netspeed.c:1247 #| msgid "IPV6 Address:" msgid "IPv6 Address:" msgstr "Endereço IPv6:" #: ../src/netspeed.c:1279 msgid "Signal Strength:" msgstr "Potência do Sinal:" #: ../src/netspeed.c:1280 msgid "ESSID:" msgstr "ESSID:" #: ../src/netspeed.c:1366 #, c-format msgid "Do you want to disconnect %s now?" msgstr "Quer desligar %s agora?" #: ../src/netspeed.c:1370 #, c-format msgid "Do you want to connect %s now?" msgstr "Quer ligar %s agora?" #: ../src/netspeed.c:1444 #, c-format msgid "%s is down" msgstr "%s está desligado" #: ../src/netspeed.c:1449 #, c-format msgid "" "%s: %s\n" "in: %s out: %s" msgstr "" "%s: %s\n" "recebido: %s enviado: %s" #: ../src/netspeed.c:1451 ../src/netspeed.c:1460 msgid "has no ip" msgstr "não tem ip" #: ../src/netspeed.c:1458 #, c-format msgid "" "%s: %s\n" "sum: %s" msgstr "" "%s: %s\n" "soma: %s" #: ../src/netspeed.c:1467 #, c-format msgid "" "\n" "ESSID: %s\n" "Strength: %d %%" msgstr "" "\n" "ESSID: %s\n" "Potência: %d %%" #: ../src/netspeed.c:1468 msgid "unknown" msgstr "desconhecido" #: ../src/netspeed.c:1515 msgid "Netspeed" msgstr "Netspeed" #: ../src/netspeed.c:1683 msgid "Device _Details" msgstr "_Detalhes do Dispositivo" #: ../src/netspeed.c:1683 msgid "_Preferences..." msgstr "_Preferências..." #: ../src/netspeed.c:1683 msgid "_Help" msgstr "_Ajuda" #: ../src/netspeed.c:1683 msgid "_About..." msgstr "_Sobre..." #~ msgid "_Always monitor a connected device, if possible" #~ msgstr "Se possível, monitorizar _sempre um dispositivo ligado" netspeed_applet-0.16/po/oc.po0000644000175000017500000001150211402426203013105 00000000000000# Occitan translation of netspeed_applet # Copyright (C) 2002-2006 THE NetSpeed_applet'S COPYRIGHT HOLDER # This file is distributed under the same license as the NetSpeed_applet package. # # Yannig MARCHEGAY (yannig@marchegay.org) - 2006-2007 # msgid "" msgstr "" "Project-Id-Version: netspeed_applet 0.14\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2006-09-28 11:30+0200\n" "PO-Revision-Date: 2007-08-20 19:27+0200\n" "Last-Translator: Yannig MARCHEGAY (Kokoyaya) \n" "Language-Team: Occitan (post 1500) \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n > 1);" #: ../GNOME_NetspeedApplet.server.in.in.h:1 msgid "Internet" msgstr "Internet" #: ../GNOME_NetspeedApplet.server.in.in.h:2 msgid "Netspeed Applet" msgstr "" #: ../GNOME_NetspeedApplet.server.in.in.h:3 msgid "Netspeed Applet Factory" msgstr "" #: ../GNOME_NetspeedApplet.server.in.in.h:4 msgid "Network Monitor" msgstr "" #: ../src/netspeed.c:279 msgid "b/s" msgstr "b/s" #: ../src/netspeed.c:279 msgid "B/s" msgstr "o/s" #: ../src/netspeed.c:281 msgid "bits" msgstr "bits" #: ../src/netspeed.c:281 msgid "bytes" msgstr "octets" #: ../src/netspeed.c:288 msgid "kb/s" msgstr "ko/s" #: ../src/netspeed.c:288 msgid "KiB/s" msgstr "ko/s" #: ../src/netspeed.c:290 msgid "kb" msgstr "ko" #: ../src/netspeed.c:290 msgid "KiB" msgstr "ko" #: ../src/netspeed.c:299 msgid "Mb/s" msgstr "Mo/s" #: ../src/netspeed.c:299 msgid "MiB/s" msgstr "Mo/s" #: ../src/netspeed.c:301 msgid "Mb" msgstr "Mo" #: ../src/netspeed.c:301 msgid "MiB" msgstr "Mo" #: ../src/netspeed.c:502 #, c-format msgid "" "%s: %s\n" "in: %s out: %s" msgstr "" #: ../src/netspeed.c:504 ../src/netspeed.c:510 msgid "has no ip" msgstr "" #: ../src/netspeed.c:508 #, c-format msgid "" "%s: %s\n" "sum: %s" msgstr "" #: ../src/netspeed.c:521 #, c-format msgid "%s is down" msgstr "" #: ../src/netspeed.c:645 msgid "Netspeed Website" msgstr "" #: ../src/netspeed.c:654 msgid "Netspeed" msgstr "Netspeed" #: ../src/netspeed.c:657 msgid "" "A little applet that displays some information on the traffic on the " "specified network device" msgstr "" #: ../src/netspeed.c:660 msgid "translator-credits" msgstr "" "La còla occitana de revirada d'Ubuntu, 2007 - ubuntu-l10n-oci@lists.ubuntu.com" #: ../src/netspeed.c:713 #, c-format msgid "" "There was an error displaying help:\n" "%s" msgstr "" "I a agut una error al moment de mostrar l'ajuda :\n" "%s" #: ../src/netspeed.c:855 msgid "Netspeed Preferences" msgstr "" #: ../src/netspeed.c:878 msgid "General Settings" msgstr "Paramètres generals" #: ../src/netspeed.c:899 msgid "Network _device:" msgstr "" #: ../src/netspeed.c:923 msgid "_Update interval:" msgstr "" #: ../src/netspeed.c:939 msgid "millisecond" msgstr "" #: ../src/netspeed.c:948 msgid "Label _font size:" msgstr "" #: ../src/netspeed.c:964 msgid "points" msgstr "punts" #: ../src/netspeed.c:970 msgid "Show _sum instead of in & out" msgstr "" #: ../src/netspeed.c:974 msgid "Show _bits instead of bytes" msgstr "" #: ../src/netspeed.c:978 msgid "Change _icon according to the selected device" msgstr "" #: ../src/netspeed.c:983 msgid "_Always monitor a connected device, if possible" msgstr "" #: ../src/netspeed.c:1102 msgid "Device Details for %s" msgstr "" #: ../src/netspeed.c:1128 msgid "_In graph color" msgstr "" #: ../src/netspeed.c:1129 msgid "_Out graph color" msgstr "" #: ../src/netspeed.c:1145 msgid "Internet Address:" msgstr "" #: ../src/netspeed.c:1146 msgid "Netmask:" msgstr "Masqueta ret :" #: ../src/netspeed.c:1147 msgid "Hardware Address:" msgstr "" #: ../src/netspeed.c:1148 msgid "P-t-P Address:" msgstr "" #: ../src/netspeed.c:1149 msgid "Bytes in:" msgstr "" #: ../src/netspeed.c:1150 msgid "Bytes out:" msgstr "" #: ../src/netspeed.c:1152 ../src/netspeed.c:1153 ../src/netspeed.c:1154 #: ../src/netspeed.c:1155 msgid "none" msgstr "pas cap" #: ../src/netspeed.c:1194 msgid "IPV6 Address:" msgstr "" #: ../src/netspeed.c:1301 #, c-format msgid "Do you want to disconnect %s now?" msgstr "" #: ../src/netspeed.c:1305 #, c-format msgid "Do you want to connect %s now?" msgstr "" #: ../src/netspeed.c:1573 msgid "Device _Details" msgstr "" #: ../src/netspeed.c:1573 msgid "_Preferences..." msgstr "_Preferéncias..." #: ../src/netspeed.c:1573 msgid "_Help" msgstr "_Ajuda" #: ../src/netspeed.c:1573 msgid "_About..." msgstr "_A prepaus..." #~ msgid "kB/s" #~ msgstr "Ko/s" #~ msgid "kbyte" #~ msgstr "Koctets" #~ msgid "Mbyte" #~ msgstr "Moctets" #~ msgid "TRANSLATORS" #~ msgstr "Mille-Mathias Baptiste " #~ msgid "Netspeed Applet Settings" #~ msgstr "Paramétres de l'Applet Netspeed" #~ msgid "Device %s" #~ msgstr "Périphérique %s" #~ msgid "Refreshes per second:" #~ msgstr "Rafraichit par seconde:" #~ msgid "0 b/s" #~ msgstr "0 b/s" netspeed_applet-0.16/po/lt.po0000644000175000017500000001240511402426203013126 00000000000000# translation of lt to Lithuanian # Copyright (C) 2008 Gintautas Miliauskas # This file is distributed under the same license as the netspeed package. # # Gintautas Miliauskas , 2008. msgid "" msgstr "" "Project-Id-Version: lt\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2009-09-15 03:10+0300\n" "PO-Revision-Date: 2009-09-15 03:10+0300\n" "Last-Translator: Gintautas Miliauskas \n" "Language-Team: Lithuanian \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.11.4\n" "Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && (n%" "100<10 || n%100>=20) ? 1 : 2);\n" #: ../GNOME_NetspeedApplet.server.in.in.h:1 msgid "Internet" msgstr "Internetas" #: ../GNOME_NetspeedApplet.server.in.in.h:2 msgid "Netspeed Applet" msgstr "Netspeed įtaisas" #: ../GNOME_NetspeedApplet.server.in.in.h:3 msgid "Netspeed Applet Factory" msgstr "Netspeed įtaiso gamykla" #: ../GNOME_NetspeedApplet.server.in.in.h:4 msgid "Network Monitor" msgstr "Tinklo monitorius" #: ../src/netspeed.c:407 msgid "b/s" msgstr "b/s" #: ../src/netspeed.c:407 msgid "B/s" msgstr "B/s" #: ../src/netspeed.c:409 msgid "bits" msgstr "bitų" #: ../src/netspeed.c:409 msgid "bytes" msgstr "baitų" #: ../src/netspeed.c:416 msgid "kb/s" msgstr "kb/s" #: ../src/netspeed.c:416 msgid "KiB/s" msgstr "KiB/s" #: ../src/netspeed.c:418 msgid "kb" msgstr "kb" #: ../src/netspeed.c:418 msgid "KiB" msgstr "KiB" #: ../src/netspeed.c:427 msgid "Mb/s" msgstr "Mb/s" #: ../src/netspeed.c:427 msgid "MiB/s" msgstr "MiB/s" #: ../src/netspeed.c:429 msgid "Mb" msgstr "Mb" #: ../src/netspeed.c:429 msgid "MiB" msgstr "MiB" #: ../src/netspeed.c:755 #, c-format msgid "" "There was an error displaying help:\n" "%s" msgstr "" "Klaida rodant žinyną:\n" "%s" #: ../src/netspeed.c:806 #, c-format msgid "" "Failed to show:\n" "%s" msgstr "" "Nepavyko parodyti:\n" "%s" #: ../src/netspeed.c:837 msgid "" "A little applet that displays some information on the traffic on the " "specified network device" msgstr "" "Paprastas įtaisas, rodantis informaciją apie nurodyto tinklo įrenginio " "aktyvumą" #: ../src/netspeed.c:840 msgid "translator-credits" msgstr "Gintautas Miliauskas " #: ../src/netspeed.c:842 msgid "Netspeed Website" msgstr "Netspeed svetainė" #: ../src/netspeed.c:968 msgid "Netspeed Preferences" msgstr "Netspeed nustatymai" #: ../src/netspeed.c:991 msgid "General Settings" msgstr "Bendrieji nustatymai" #: ../src/netspeed.c:1012 msgid "Network _device:" msgstr "Tinklo _įrenginys:" #. Default means device with default route set #: ../src/netspeed.c:1023 msgid "Default" msgstr "Numatytasis" #: ../src/netspeed.c:1036 msgid "Show _sum instead of in & out" msgstr "Rodyti _sumą vietoje gaunamo ir siunčiamo srauto" #: ../src/netspeed.c:1040 msgid "Show _bits instead of bytes" msgstr "Rodyti _bitus vietoje baitų" #: ../src/netspeed.c:1044 msgid "Change _icon according to the selected device" msgstr "Keisti _piktogramą atsižvelgiant į pasirinktą įrenginį" #: ../src/netspeed.c:1155 #, c-format msgid "Device Details for %s" msgstr "Įrenginio %s informacija" #: ../src/netspeed.c:1181 msgid "_In graph color" msgstr "_Gaunamų duomenų grafiko spalva" #: ../src/netspeed.c:1182 msgid "_Out graph color" msgstr "_Siunčiamų duomenų grafiko spalva" #: ../src/netspeed.c:1198 msgid "Internet Address:" msgstr "Interneto adresas:" #: ../src/netspeed.c:1199 msgid "Netmask:" msgstr "Tinklo kaukė:" #: ../src/netspeed.c:1200 msgid "Hardware Address:" msgstr "Įrenginio adresas:" #: ../src/netspeed.c:1201 msgid "P-t-P Address:" msgstr "P-t-P adresas:" #: ../src/netspeed.c:1202 msgid "Bytes in:" msgstr "Baitų gauta:" #: ../src/netspeed.c:1203 msgid "Bytes out:" msgstr "Baitų išsiųsta:" #: ../src/netspeed.c:1205 ../src/netspeed.c:1206 ../src/netspeed.c:1207 #: ../src/netspeed.c:1208 msgid "none" msgstr "jokio" #: ../src/netspeed.c:1247 msgid "IPv6 Address:" msgstr "IPv6 adresas:" #: ../src/netspeed.c:1279 msgid "Signal Strength:" msgstr "Signalo stiprumas:" #: ../src/netspeed.c:1280 msgid "ESSID:" msgstr "ESSID:" #: ../src/netspeed.c:1366 #, c-format msgid "Do you want to disconnect %s now?" msgstr "Ar norite dabar atjungti %s?" #: ../src/netspeed.c:1370 #, c-format msgid "Do you want to connect %s now?" msgstr "Ar norite dabar prijungti %s?" #: ../src/netspeed.c:1444 #, c-format msgid "%s is down" msgstr "%s atjungtas" #: ../src/netspeed.c:1449 #, c-format msgid "" "%s: %s\n" "in: %s out: %s" msgstr "" "%s: %s\n" "gaunama: %s siunčiama: %s" #: ../src/netspeed.c:1451 ../src/netspeed.c:1460 msgid "has no ip" msgstr "neturi ip" #: ../src/netspeed.c:1458 #, c-format msgid "" "%s: %s\n" "sum: %s" msgstr "" "%s: %s\n" "suma: %s" #: ../src/netspeed.c:1467 #, c-format msgid "" "\n" "ESSID: %s\n" "Strength: %d %%" msgstr "" "\n" "ESSID: %s\n" "Stiprumas: %d %%" #: ../src/netspeed.c:1468 msgid "unknown" msgstr "nežinoma" #: ../src/netspeed.c:1515 msgid "Netspeed" msgstr "Netspeed" #: ../src/netspeed.c:1683 msgid "Device _Details" msgstr "Įrenginio _informacija" #: ../src/netspeed.c:1683 msgid "_Preferences..." msgstr "_Nustatymai..." #: ../src/netspeed.c:1683 msgid "_Help" msgstr "_Žinynas" #: ../src/netspeed.c:1683 msgid "_About..." msgstr "_Apie..." netspeed_applet-0.16/po/it.po0000644000175000017500000001251411402426203013124 00000000000000# Italian translation of netspeed_applet. # Copyright (C) 2002-2008 netspeed_applet'S COPYRIGHT HOLDER # This file is distributed under the same license as the netspeed_applet package. # Lapo Calamandrei , 2002. # Roberto Inzerillo , 2005. # Gianvito Cavasoli , 2008. # # msgid "" msgstr "" "Project-Id-Version: netspeed_applet 0.15.x\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2008-12-04 15:38+0100\n" "PO-Revision-Date: 2009-01-22 21:45+0100\n" "Last-Translator: Gianvito Cavasoli \n" "Language-Team: Italian \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #: ../GNOME_NetspeedApplet.server.in.in.h:1 msgid "Internet" msgstr "Internet" #: ../GNOME_NetspeedApplet.server.in.in.h:2 msgid "Netspeed Applet" msgstr "Applet Netspeed" #: ../GNOME_NetspeedApplet.server.in.in.h:3 msgid "Netspeed Applet Factory" msgstr "Fabbrica applet Netspeed" #: ../GNOME_NetspeedApplet.server.in.in.h:4 msgid "Network Monitor" msgstr "Monitor di rete" #: ../src/netspeed.c:407 msgid "b/s" msgstr "b/s" #: ../src/netspeed.c:407 msgid "B/s" msgstr "B/s" #: ../src/netspeed.c:409 msgid "bits" msgstr "bit" #: ../src/netspeed.c:409 msgid "bytes" msgstr "byte" #: ../src/netspeed.c:416 msgid "kb/s" msgstr "kb/s" #: ../src/netspeed.c:416 msgid "KiB/s" msgstr "KiB/s" #: ../src/netspeed.c:418 msgid "kb" msgstr "kb" #: ../src/netspeed.c:418 msgid "KiB" msgstr "KiB" #: ../src/netspeed.c:427 msgid "Mb/s" msgstr "Mb/s" #: ../src/netspeed.c:427 msgid "MiB/s" msgstr "MiB/s" #: ../src/netspeed.c:429 msgid "Mb" msgstr "Mb" #: ../src/netspeed.c:429 msgid "MiB" msgstr "MiB" #: ../src/netspeed.c:755 #, c-format msgid "" "There was an error displaying help:\n" "%s" msgstr "" "Si è verificato un errore nella visualizzazione dell'aiuto:\n" "%s" #: ../src/netspeed.c:806 #, c-format msgid "" "Failed to show:\n" "%s" msgstr "" "Visualizzazione fallita:\n" "%s" #: ../src/netspeed.c:837 msgid "" "A little applet that displays some information on the traffic on the " "specified network device" msgstr "" "Una piccola applet che mostra alcune informazioni sul traffico di rete " "dell'interfaccia specificata" #: ../src/netspeed.c:840 msgid "translator-credits" msgstr "Gianvito Cavasoli " #: ../src/netspeed.c:842 msgid "Netspeed Website" msgstr "Sito web di Netspeed" #: ../src/netspeed.c:968 msgid "Netspeed Preferences" msgstr "Preferenze di Netspeed" #: ../src/netspeed.c:991 msgid "General Settings" msgstr "Impostazioni generali" #: ../src/netspeed.c:1012 msgid "Network _device:" msgstr "I_nterfaccia di rete:" #. Default means device with default route set #: ../src/netspeed.c:1023 msgid "Default" msgstr "Predefinita" #: ../src/netspeed.c:1036 msgid "Show _sum instead of in & out" msgstr "Visualizzare il _totale invece di invio e ricezione" #: ../src/netspeed.c:1040 msgid "Show _bits instead of bytes" msgstr "Visualizzare i _bit invece dei byte" #: ../src/netspeed.c:1044 msgid "Change _icon according to the selected device" msgstr "Cambiare l'ic_ona in base all'interfaccia selezionata" #: ../src/netspeed.c:1155 #, c-format msgid "Device Details for %s" msgstr "Dettagli interfaccia %s" #: ../src/netspeed.c:1181 msgid "_In graph color" msgstr "Colore grafico _ricezione" #: ../src/netspeed.c:1182 msgid "_Out graph color" msgstr "Colore grafico _trasmissione" #: ../src/netspeed.c:1198 msgid "Internet Address:" msgstr "Indirizzo internet:" #: ../src/netspeed.c:1199 msgid "Netmask:" msgstr "Netmask:" #: ../src/netspeed.c:1200 msgid "Hardware Address:" msgstr "Indirizzo hardware:" #: ../src/netspeed.c:1201 msgid "P-t-P Address:" msgstr "Indirizzo P-t-P:" #: ../src/netspeed.c:1202 msgid "Bytes in:" msgstr "Byte ricevuti:" #: ../src/netspeed.c:1203 msgid "Bytes out:" msgstr "Byte trasmessi:" #: ../src/netspeed.c:1205 ../src/netspeed.c:1206 ../src/netspeed.c:1207 #: ../src/netspeed.c:1208 msgid "none" msgstr "nessuno" #: ../src/netspeed.c:1247 msgid "IPV6 Address:" msgstr "Indirizzo IPV6:" #: ../src/netspeed.c:1279 msgid "Signal Strength:" msgstr "Intensità del segnale:" #: ../src/netspeed.c:1280 msgid "ESSID:" msgstr "ESSID:" #: ../src/netspeed.c:1366 #, c-format msgid "Do you want to disconnect %s now?" msgstr "Si vuole disconnettere %s adesso?" #: ../src/netspeed.c:1370 #, c-format msgid "Do you want to connect %s now?" msgstr "Si vuole connettere %s adesso?" #: ../src/netspeed.c:1444 #, c-format msgid "%s is down" msgstr "%s non è attiva" #: ../src/netspeed.c:1449 #, c-format msgid "" "%s: %s\n" "in: %s out: %s" msgstr "" "%s: %s\n" "Ricezione: %s Invio:%s" #: ../src/netspeed.c:1451 ../src/netspeed.c:1460 msgid "has no ip" msgstr "non ha ip" #: ../src/netspeed.c:1458 #, c-format msgid "" "%s: %s\n" "sum: %s" msgstr "" "%s: %s\n" "totale: %s" #: ../src/netspeed.c:1467 #, c-format msgid "" "\n" "ESSID: %s\n" "Strength: %d %%" msgstr "" "\n" "ESSID: %s\n" "Potenza: %d %%" #: ../src/netspeed.c:1468 msgid "unknown" msgstr "sconosciuto" #: ../src/netspeed.c:1515 msgid "Netspeed" msgstr "Netspeed" #: ../src/netspeed.c:1683 msgid "Device _Details" msgstr "Detta_gli interfaccia" #: ../src/netspeed.c:1683 msgid "_Preferences..." msgstr "Preferen_ze..." #: ../src/netspeed.c:1683 msgid "_Help" msgstr "A_iuto" #: ../src/netspeed.c:1683 msgid "_About..." msgstr "I_nformazioni..." netspeed_applet-0.16/po/da.po0000644000175000017500000001221611402426203013073 00000000000000# Danish translation for netspeed. # Copyright (C) 2009 netspeed & Joe Hansen. # This file is distributed under the same license as the netspeed package. # Joe Hansen , 2009. # msgid "" msgstr "" "Project-Id-Version: netspeed master\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2009-11-05 23:37+0100\n" "PO-Revision-Date: 2009-10-30 16:07+0200\n" "Last-Translator: Joe Hansen \n" "Language-Team: Danish \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" #: ../GNOME_NetspeedApplet.server.in.in.h:1 msgid "Internet" msgstr "Internet" #: ../GNOME_NetspeedApplet.server.in.in.h:2 msgid "Netspeed Applet" msgstr "Netspeed - panelprogram" #: ../GNOME_NetspeedApplet.server.in.in.h:3 msgid "Netspeed Applet Factory" msgstr "Netspeed - panelprogramfabrik" #: ../GNOME_NetspeedApplet.server.in.in.h:4 msgid "Network Monitor" msgstr "Netværksovervågning" #: ../src/netspeed.c:407 msgid "b/s" msgstr "b/s" #: ../src/netspeed.c:407 msgid "B/s" msgstr "B/s" #: ../src/netspeed.c:409 msgid "bits" msgstr "bit" #: ../src/netspeed.c:409 msgid "bytes" msgstr "byte" #: ../src/netspeed.c:416 msgid "kb/s" msgstr "kb/s" #: ../src/netspeed.c:416 msgid "KiB/s" msgstr "Kib/s" #: ../src/netspeed.c:418 msgid "kb" msgstr "kb" #: ../src/netspeed.c:418 msgid "KiB" msgstr "Kib" #: ../src/netspeed.c:427 msgid "Mb/s" msgstr "Mb/s" #: ../src/netspeed.c:427 msgid "MiB/s" msgstr "MiB/s" #: ../src/netspeed.c:429 msgid "Mb" msgstr "Mb" #: ../src/netspeed.c:429 msgid "MiB" msgstr "MiB" #: ../src/netspeed.c:755 #, c-format msgid "" "There was an error displaying help:\n" "%s" msgstr "" "Der var en fejl under visning af hjælp:\n" "%s" #: ../src/netspeed.c:806 #, c-format msgid "" "Failed to show:\n" "%s" msgstr "" "Kunne ikke vise:\n" "%s" #: ../src/netspeed.c:837 msgid "" "A little applet that displays some information on the traffic on the " "specified network device" msgstr "" "Et lille panelprogram som viser information om trafikken på den angivne " "netværksenhed" #: ../src/netspeed.c:840 msgid "translator-credits" msgstr "" "Joe Hansen , 2009.\n" "\n" "Dansk-gruppen \n" "Mere info: http://www.dansk-gruppen.dk" #: ../src/netspeed.c:842 msgid "Netspeed Website" msgstr "Netspeeds hjemmeside" #: ../src/netspeed.c:968 msgid "Netspeed Preferences" msgstr "Netspeeds indstillinger" #: ../src/netspeed.c:991 msgid "General Settings" msgstr "Generel opsætning" #: ../src/netspeed.c:1012 msgid "Network _device:" msgstr "Netværks_enhed:" #. Default means device with default route set #: ../src/netspeed.c:1023 msgid "Default" msgstr "Standard" #: ../src/netspeed.c:1036 msgid "Show _sum instead of in & out" msgstr "Vis _sum i steden for ind & ud" #: ../src/netspeed.c:1040 msgid "Show _bits instead of bytes" msgstr "Vis _bit i steden for byte" #: ../src/netspeed.c:1044 msgid "Change _icon according to the selected device" msgstr "Ændr _ikon efter den valgte enhed" #: ../src/netspeed.c:1155 #, c-format msgid "Device Details for %s" msgstr "Enhedsdetaljer for %s" #: ../src/netspeed.c:1181 msgid "_In graph color" msgstr "Graffarve for _ind" #: ../src/netspeed.c:1182 msgid "_Out graph color" msgstr "Graffarve for _ud" #: ../src/netspeed.c:1198 msgid "Internet Address:" msgstr "Internetadresse:" #: ../src/netspeed.c:1199 msgid "Netmask:" msgstr "Netmaske:" #: ../src/netspeed.c:1200 msgid "Hardware Address:" msgstr "Hardwareadresse:" #: ../src/netspeed.c:1201 msgid "P-t-P Address:" msgstr "P-t-P-adresse:" #: ../src/netspeed.c:1202 msgid "Bytes in:" msgstr "Byte ind:" #: ../src/netspeed.c:1203 msgid "Bytes out:" msgstr "Byte ud:" #: ../src/netspeed.c:1205 ../src/netspeed.c:1206 ../src/netspeed.c:1207 #: ../src/netspeed.c:1208 msgid "none" msgstr "ingen" #: ../src/netspeed.c:1247 msgid "IPv6 Address:" msgstr "IPv6-adresse:" #: ../src/netspeed.c:1279 msgid "Signal Strength:" msgstr "Signalstyrke:" #: ../src/netspeed.c:1280 msgid "ESSID:" msgstr "ESSID:" #: ../src/netspeed.c:1366 #, c-format msgid "Do you want to disconnect %s now?" msgstr "Ønsker du at afbryde %s nu?" #: ../src/netspeed.c:1370 #, c-format msgid "Do you want to connect %s now?" msgstr "Ønsker du at forbinde til %s nu?" #: ../src/netspeed.c:1444 #, c-format msgid "%s is down" msgstr "%s er nede" #: ../src/netspeed.c:1449 #, c-format msgid "" "%s: %s\n" "in: %s out: %s" msgstr "" "%s: %s\n" "i: %s ud: %s" #: ../src/netspeed.c:1451 ../src/netspeed.c:1460 msgid "has no ip" msgstr "har ingen ip" #: ../src/netspeed.c:1458 #, c-format msgid "" "%s: %s\n" "sum: %s" msgstr "" "%s: %s\n" "sum: %s" #: ../src/netspeed.c:1467 #, c-format msgid "" "\n" "ESSID: %s\n" "Strength: %d %%" msgstr "" "\n" "ESSID: %s\n" "Styrke: %d %%" #: ../src/netspeed.c:1468 msgid "unknown" msgstr "ukendt" #: ../src/netspeed.c:1515 msgid "Netspeed" msgstr "Netspeed" #: ../src/netspeed.c:1683 msgid "Device _Details" msgstr "Enheds_detaljer" #: ../src/netspeed.c:1683 msgid "_Preferences..." msgstr "_Indstillinger..." #: ../src/netspeed.c:1683 msgid "_Help" msgstr "_Hjælp" #: ../src/netspeed.c:1683 msgid "_About..." msgstr "_Om..." netspeed_applet-0.16/po/tr.po0000644000175000017500000001110311402426203013126 00000000000000# translation of neetspeed.tr.po. # Copyright (C) 2002,2003 Free Software Foundation, Inc. # Arman Aksoy , 2003. # msgid "" msgstr "" "Project-Id-Version: neetspeed\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2005-04-11 03:07+0200\n" "PO-Revision-Date: 2003-02-17 18:59+0200\n" "Last-Translator: Arman Aksoy \n" "Language-Team: Turkish \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #: ../GNOME_NetspeedApplet.server.in.h:1 msgid "Internet" msgstr "İnternet" #: ../GNOME_NetspeedApplet.server.in.h:2 msgid "Netspeed Applet" msgstr "Nethızı Apleti" #: ../GNOME_NetspeedApplet.server.in.h:3 msgid "Netspeed Applet Factory" msgstr "Nethızı Apleti Üreticisi" #: ../GNOME_NetspeedApplet.server.in.h:4 msgid "Network Monitor" msgstr "" #: ../src/netspeed.c:276 msgid "b/s" msgstr "b/s" #: ../src/netspeed.c:276 msgid "B/s" msgstr "B/s" #: ../src/netspeed.c:276 msgid "byte" msgstr "bayt" #: ../src/netspeed.c:279 ../src/netspeed.c:282 msgid "kb/s" msgstr "kb/s" #: ../src/netspeed.c:279 ../src/netspeed.c:282 msgid "kB/s" msgstr "kB/s" #: ../src/netspeed.c:279 ../src/netspeed.c:282 msgid "kbyte" msgstr "kbayt" #: ../src/netspeed.c:284 msgid "Mb/s" msgstr "Mb/s" #: ../src/netspeed.c:284 msgid "MB/s" msgstr "MB/s" #: ../src/netspeed.c:284 msgid "Mbyte" msgstr "MBayt" #: ../src/netspeed.c:468 #, c-format msgid "" "%s :%s\n" "in: %s out: %s" msgstr "" "%s :%s\n" "gelen: %s giden: %s" #: ../src/netspeed.c:469 ../src/netspeed.c:472 msgid "has no ip" msgstr "ip yok" #: ../src/netspeed.c:471 #, c-format msgid "" "%s: %s\n" "sum: %s" msgstr "" "%s: %s\n" "toplam: %s" #: ../src/netspeed.c:479 #, c-format msgid "%s is down" msgstr "%s kapalı" #. Feel free to put your names here translators :-) #: ../src/netspeed.c:590 msgid "TRANSLATORS" msgstr "Arman Aksoy (Armish) " #: ../src/netspeed.c:595 #, fuzzy msgid "Netspeed" msgstr "Nethızı Apleti" #: ../src/netspeed.c:598 msgid "" "A little applet that displays some information on the traffic on the " "specified network device" msgstr "" "Belirten ağ aygıtındaki veri trafiği hakkında bilgi veren küçük bit aplet" #: ../src/netspeed.c:791 msgid "Netspeed Preferences" msgstr "" #: ../src/netspeed.c:814 #, fuzzy msgid "General Settings" msgstr "Tercihler:" #: ../src/netspeed.c:835 msgid "Network _device:" msgstr "Ağ _aygıtı:" #: ../src/netspeed.c:859 msgid "_Update interval:" msgstr "_Yenileme aralığı:" #: ../src/netspeed.c:875 #, fuzzy msgid "millisecond" msgstr "milisaniye" #: ../src/netspeed.c:884 msgid "Label _font size:" msgstr "Etiket yazı _tipi boyutu:" #: ../src/netspeed.c:900 msgid "points" msgstr "noktalar" #: ../src/netspeed.c:906 msgid "Show _sum instead of in & out" msgstr "Giden & gelen yerine _toplam kullan" #: ../src/netspeed.c:910 msgid "Show _bits/s (b/s) instead of bytes/s (B/s)" msgstr "bayt/s (B/s) yerine bit/s (b/s) kullan" #: ../src/netspeed.c:914 msgid "Change _icon according to the selected device" msgstr "Seçilen aygıta göre _simgeyi değiştir" #: ../src/netspeed.c:919 msgid "_Always monitor a connected device, if possible" msgstr "" #: ../src/netspeed.c:1041 #, c-format msgid "Device Details for %s" msgstr "%s için Aygıt Detayları" #: ../src/netspeed.c:1067 msgid "_In graph color" msgstr "Grafiksel _renklerde" #: ../src/netspeed.c:1068 msgid "_Out graph color" msgstr "G_iden grafik rengi" #: ../src/netspeed.c:1087 msgid "Internet Address:" msgstr "İnternet Adresi:" #: ../src/netspeed.c:1088 msgid "Netmask:" msgstr "Ağ maskesi:" #: ../src/netspeed.c:1089 msgid "Hardware Address:" msgstr "Donanım Adresi:" #: ../src/netspeed.c:1090 msgid "P-t-P Address:" msgstr "P-t-P Adresi:" #: ../src/netspeed.c:1091 msgid "Bytes in:" msgstr "Gelen bayt:" #: ../src/netspeed.c:1092 msgid "Bytes out:" msgstr "Giden bayt:" #: ../src/netspeed.c:1094 ../src/netspeed.c:1095 ../src/netspeed.c:1096 #: ../src/netspeed.c:1097 msgid "none" msgstr "yok" #: ../src/netspeed.c:1226 #, c-format msgid "Do you want to disconnect %s now?" msgstr "" #: ../src/netspeed.c:1230 #, c-format msgid "Do you want to connect %s now?" msgstr "" #: ../src/netspeed.c:1455 #, fuzzy msgid "Device _Details" msgstr "Aygıt _Detayları..." #: ../src/netspeed.c:1455 #, fuzzy msgid "_Preferences..." msgstr "_Seçenekler..." #: ../src/netspeed.c:1455 msgid "_Help" msgstr "_Yardım" #: ../src/netspeed.c:1455 msgid "_About..." msgstr "_Hakkında..." #~ msgid "Netspeed Applet Settings" #~ msgstr "Net hızı Apleti Tercihleri" #~ msgid "Device %s" #~ msgstr "%s Aygıtı" netspeed_applet-0.16/po/ru.po0000644000175000017500000001467211402426203013145 00000000000000# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # Nail Abdrahmanov , 2002. # Диконов Вячеслав (Vyacheslav Dikonov) , 2002. msgid "" msgstr "" "Project-Id-Version: netspeed_applet 0.4\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2006-09-28 21:19+0300\n" "PO-Revision-Date: 2002-09-23 19:01+3hour\n" "Last-Translator: Vyacheslav Dikonov \n" "Language-Team: Russian \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #: ../GNOME_NetspeedApplet.server.in.in.h:1 msgid "Internet" msgstr "Интернет" #: ../GNOME_NetspeedApplet.server.in.in.h:2 msgid "Netspeed Applet" msgstr "Индикатор скорости" #: ../GNOME_NetspeedApplet.server.in.in.h:3 msgid "Netspeed Applet Factory" msgstr "Фабрика индикаторов скорости" #: ../GNOME_NetspeedApplet.server.in.in.h:4 msgid "Network Monitor" msgstr "Индикатор скорости" #: ../src/netspeed.c:279 msgid "b/s" msgstr "б/с" #: ../src/netspeed.c:279 msgid "B/s" msgstr "Б/с" #: ../src/netspeed.c:281 msgid "bits" msgstr "бит" #: ../src/netspeed.c:281 msgid "bytes" msgstr "байт" #: ../src/netspeed.c:288 msgid "kb/s" msgstr "кб/с" #: ../src/netspeed.c:288 msgid "KiB/s" msgstr "кБ/с" #: ../src/netspeed.c:290 msgid "kb" msgstr "кб" #: ../src/netspeed.c:290 msgid "KiB" msgstr "кБ" #: ../src/netspeed.c:299 msgid "Mb/s" msgstr "мб/с" #: ../src/netspeed.c:299 msgid "MiB/s" msgstr "мБ/с" #: ../src/netspeed.c:301 msgid "Mb" msgstr "мб" #: ../src/netspeed.c:301 msgid "MiB" msgstr "мБ" #: ../src/netspeed.c:502 #, c-format msgid "" "%s: %s\n" "in: %s out: %s" msgstr "" "%s :%s\n" "входящий: %s исходящий: %s" #: ../src/netspeed.c:504 ../src/netspeed.c:510 msgid "has no ip" msgstr "нет IP адреса" #: ../src/netspeed.c:508 #, c-format msgid "" "%s: %s\n" "sum: %s" msgstr "" "%s :%s\n" "суммарная скорость: %s" #: ../src/netspeed.c:521 #, c-format msgid "%s is down" msgstr "%s отключен" #: ../src/netspeed.c:645 msgid "Netspeed Website" msgstr "Веб-страница индикатора скорости" #: ../src/netspeed.c:654 msgid "Netspeed" msgstr "Индикатор скорости" #: ../src/netspeed.c:657 msgid "" "A little applet that displays some information on the traffic on the " "specified network device" msgstr "" "Индикатор скорости сообщает статистические сведения о проходящем через " "выбранное сетевое устройство потоке данных." #: ../src/netspeed.c:660 msgid "translator-credits" msgstr "Вячеслав Диконов" #: ../src/netspeed.c:713 #, c-format msgid "" "There was an error displaying help:\n" "%s" msgstr "" "Ошибка при показе справки:\n" "%s" #: ../src/netspeed.c:855 msgid "Netspeed Preferences" msgstr "Настройки" #: ../src/netspeed.c:878 msgid "General Settings" msgstr "Общие" #: ../src/netspeed.c:899 msgid "Network _device:" msgstr "Сетевое устройство:" #: ../src/netspeed.c:923 msgid "_Update interval:" msgstr "Интервал обновления:" #: ../src/netspeed.c:939 msgid "millisecond" msgstr "миллисекунд" #: ../src/netspeed.c:948 msgid "Label _font size:" msgstr "_Размер шрифта:" #: ../src/netspeed.c:964 msgid "points" msgstr "пунктов" #: ../src/netspeed.c:970 msgid "Show _sum instead of in & out" msgstr "Показывать суммарную скорость входящего и исходящего трафика" #: ../src/netspeed.c:974 msgid "Show _bits instead of bytes" msgstr "Показывать скорость в _бит/сек (б/с) вместо байт/сек (Б/с)" #: ../src/netspeed.c:978 msgid "Change _icon according to the selected device" msgstr "Менять _пиктограмму в соответствии с типом устройства" #: ../src/netspeed.c:983 msgid "_Always monitor a connected device, if possible" msgstr "_Всегда отслеживать подключенное устройство, если возможно" #: ../src/netspeed.c:1102 #, c-format msgid "Device Details for %s" msgstr "Информация об устройстве %s" #: ../src/netspeed.c:1128 msgid "_In graph color" msgstr "Цвет графика _входящих данных" #: ../src/netspeed.c:1129 msgid "_Out graph color" msgstr "Цвет графика _исходящих данных" #: ../src/netspeed.c:1145 msgid "Internet Address:" msgstr "IP адрес:" #: ../src/netspeed.c:1146 msgid "Netmask:" msgstr "Маска подсети:" #: ../src/netspeed.c:1147 msgid "Hardware Address:" msgstr "Аппаратный адрес:" #: ../src/netspeed.c:1148 msgid "P-t-P Address:" msgstr "Адрес точка-точка" #: ../src/netspeed.c:1149 msgid "Bytes in:" msgstr "Объём входящего трафика:" #: ../src/netspeed.c:1150 msgid "Bytes out:" msgstr "Объём исходящего трафика:" #: ../src/netspeed.c:1152 ../src/netspeed.c:1153 ../src/netspeed.c:1154 #: ../src/netspeed.c:1155 msgid "none" msgstr "нет" #: ../src/netspeed.c:1194 msgid "IPV6 Address:" msgstr "Адрес IPV6" #: ../src/netspeed.c:1301 #, c-format msgid "Do you want to disconnect %s now?" msgstr "Отключить %s сейчас?" #: ../src/netspeed.c:1305 #, c-format msgid "Do you want to connect %s now?" msgstr "Подключить %s сейчас?" #: ../src/netspeed.c:1573 msgid "Device _Details" msgstr "Подробнее..." #: ../src/netspeed.c:1573 msgid "_Preferences..." msgstr "_Изменить настройки" #: ../src/netspeed.c:1573 msgid "_Help" msgstr "Получить _справку" #: ../src/netspeed.c:1573 msgid "_About..." msgstr "_Об апплете..." #~ msgid "kB/s" #~ msgstr "КБ/с" #~ msgid "kbyte" #~ msgstr "кбайт" #~ msgid "Mbyte" #~ msgstr "Мбайт" #~ msgid "TRANSLATORS" #~ msgstr "" #~ "Наиль Абдрахманов \n" #~ "Диконов Вячеслав" #~ msgid "Netspeed Applet Settings" #~ msgstr "Настройка" #~ msgid "Refreshes per second:" #~ msgstr "Число обновлений в секунду:" #~ msgid "Device %s" #~ msgstr "Устройство %s" #~ msgid "0 b/s" #~ msgstr "0 б/с" netspeed_applet-0.16/po/hu.po0000644000175000017500000001324411402426203013125 00000000000000# Netspeed Applet Hungarian translation. # Andras Timar , 2002. # Gabor Kelemen , 2006, 2008. # Gabor Kelemen , 2010. # Copyright (C) 2002, Free Software Foundation # This file is distributed under the same license as the Netspeed Applet package. msgid "" msgstr "" "Project-Id-Version: Netspeed Applet\n" "Report-Msgid-Bugs-To: http://bugzilla.gnome.org/enter_bug.cgi?product=netspeed&component=general\n" "POT-Creation-Date: 2009-04-27 05:43+0000\n" "PO-Revision-Date: 2010-01-22 02:17+0100\n" "Last-Translator: Gabor Kelemen \n" "Language-Team: Hungarian \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.11.4\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" #: ../GNOME_NetspeedApplet.server.in.in.h:1 msgid "Internet" msgstr "Internet" #: ../GNOME_NetspeedApplet.server.in.in.h:2 msgid "Netspeed Applet" msgstr "Hálózatsebesség kisalkalmazás" #: ../GNOME_NetspeedApplet.server.in.in.h:3 msgid "Netspeed Applet Factory" msgstr "Hálózatsebesség kisalkalmazás factory" #: ../GNOME_NetspeedApplet.server.in.in.h:4 msgid "Network Monitor" msgstr "Hálózatfigyelő" #: ../src/netspeed.c:407 msgid "b/s" msgstr "b/s" #: ../src/netspeed.c:407 msgid "B/s" msgstr "B/s" #: ../src/netspeed.c:409 msgid "bits" msgstr "bit" #: ../src/netspeed.c:409 msgid "bytes" msgstr "bájt" #: ../src/netspeed.c:416 msgid "kb/s" msgstr "kb/s" #: ../src/netspeed.c:416 msgid "KiB/s" msgstr "KiB/s" #: ../src/netspeed.c:418 msgid "kb" msgstr "kb" #: ../src/netspeed.c:418 msgid "KiB" msgstr "KiB" #: ../src/netspeed.c:427 msgid "Mb/s" msgstr "Mb/s" #: ../src/netspeed.c:427 msgid "MiB/s" msgstr "MiB/s" #: ../src/netspeed.c:429 msgid "Mb" msgstr "Mb" #: ../src/netspeed.c:429 msgid "MiB" msgstr "MiB" #: ../src/netspeed.c:755 #, c-format msgid "" "There was an error displaying help:\n" "%s" msgstr "" "Hiba történt a súgó megjelenítése közben:\n" "%s" #: ../src/netspeed.c:806 #, c-format msgid "" "Failed to show:\n" "%s" msgstr "" "Nem sikerült megjeleníteni:\n" "%s" #: ../src/netspeed.c:837 msgid "" "A little applet that displays some information on the traffic on the " "specified network device" msgstr "" "Egy meghatározott hálózati eszközön áthaladó forgalommal kapcsolatos " "információkat megjelenítő kisalkalmazás" #: ../src/netspeed.c:840 msgid "translator-credits" msgstr "" "Kelemen Gábor \n" "Tímár András " #: ../src/netspeed.c:842 msgid "Netspeed Website" msgstr "A Hálózatsebesség kisalkalmazás webhelye" #: ../src/netspeed.c:968 msgid "Netspeed Preferences" msgstr "Hálózatsebesség kisalkalmazás beállításai" #: ../src/netspeed.c:991 msgid "General Settings" msgstr "Általános beállítások" #: ../src/netspeed.c:1012 msgid "Network _device:" msgstr "Hálózati _eszköz:" #. Default means device with default route set #: ../src/netspeed.c:1023 msgid "Default" msgstr "Alapértelmezett" #: ../src/netspeed.c:1036 msgid "Show _sum instead of in & out" msgstr "Ö_sszeg megjelenítése a ki- és bemenő forgalom helyett" #: ../src/netspeed.c:1040 msgid "Show _bits instead of bytes" msgstr "_Bitek megjelenítése bájtok helyett" #: ../src/netspeed.c:1044 msgid "Change _icon according to the selected device" msgstr "_Ikon változtatása a kijelölt eszköznek megfelelően" #: ../src/netspeed.c:1155 #, c-format msgid "Device Details for %s" msgstr "%s eszköz adatai" #: ../src/netspeed.c:1181 msgid "_In graph color" msgstr "_Bejövő grafikon színe" #: ../src/netspeed.c:1182 msgid "_Out graph color" msgstr "_Kimenő grafikon színe" #: ../src/netspeed.c:1198 msgid "Internet Address:" msgstr "Internetcím:" #: ../src/netspeed.c:1199 msgid "Netmask:" msgstr "Hálózati maszk:" #: ../src/netspeed.c:1200 msgid "Hardware Address:" msgstr "Hardvercím:" #: ../src/netspeed.c:1201 msgid "P-t-P Address:" msgstr "P-t-P cím:" #: ../src/netspeed.c:1202 msgid "Bytes in:" msgstr "Bejövő bájtok:" #: ../src/netspeed.c:1203 msgid "Bytes out:" msgstr "Kimenő bájtok:" #: ../src/netspeed.c:1205 ../src/netspeed.c:1206 ../src/netspeed.c:1207 #: ../src/netspeed.c:1208 msgid "none" msgstr "nincs" #: ../src/netspeed.c:1247 #| msgid "IPV6 Address:" msgid "IPv6 Address:" msgstr "IPv6 cím:" #: ../src/netspeed.c:1279 msgid "Signal Strength:" msgstr "Jelerősség:" #: ../src/netspeed.c:1280 msgid "ESSID:" msgstr "ESSID:" #: ../src/netspeed.c:1366 #, c-format msgid "Do you want to disconnect %s now?" msgstr "Le akarja most választani ezt: %s?" #: ../src/netspeed.c:1370 #, c-format msgid "Do you want to connect %s now?" msgstr "Akarja most csatlakoztatni ezt: %s?" #: ../src/netspeed.c:1444 #, c-format msgid "%s is down" msgstr "%s nem működik" #: ../src/netspeed.c:1449 #, c-format msgid "" "%s: %s\n" "in: %s out: %s" msgstr "" "%s: %s\n" "be: %s ki: %s" #: ../src/netspeed.c:1451 ../src/netspeed.c:1460 msgid "has no ip" msgstr "nincs IP-je" #: ../src/netspeed.c:1458 #, c-format msgid "" "%s: %s\n" "sum: %s" msgstr "" "%s: %s\n" "össz: %s" #: ../src/netspeed.c:1467 #, c-format #| msgid "" #| "%s\n" #| "ESSID: %s\n" #| "Strength: %d %%" msgid "" "\n" "ESSID: %s\n" "Strength: %d %%" msgstr "" "\n" "ESSID: %s\n" "Erősség: %d %%" #: ../src/netspeed.c:1468 msgid "unknown" msgstr "ismeretlen" #: ../src/netspeed.c:1515 msgid "Netspeed" msgstr "Hálózatsebesség kisalkalmazás" #: ../src/netspeed.c:1683 msgid "Device _Details" msgstr "Eszköz _adatai..." #: ../src/netspeed.c:1683 msgid "_Preferences..." msgstr "_Tulajdonságok..." #: ../src/netspeed.c:1683 msgid "_Help" msgstr "_Súgó" #: ../src/netspeed.c:1683 msgid "_About..." msgstr "_Névjegy..." netspeed_applet-0.16/po/fi.po0000644000175000017500000001302711402426203013106 00000000000000# Finnish messages for netspeed_applet # Copyright (C) 2006-2008 Free Software Foundation, Inc. # This file is distributed under the same license as the netspeed package. # Ilkka Tuohela , 2006-2008 # msgid "" msgstr "" "Project-Id-Version: netspeed_applet\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2008-09-14 15:17+0300\n" "PO-Revision-Date: 2008-09-14 15:10+0300\n" "Last-Translator: Ilkka Tuohela \n" "Language-Team: Finnish \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" #: ../GNOME_NetspeedApplet.server.in.in.h:1 msgid "Internet" msgstr "Internet" #: ../GNOME_NetspeedApplet.server.in.in.h:2 msgid "Netspeed Applet" msgstr "Verkkonopeussovelma" #: ../GNOME_NetspeedApplet.server.in.in.h:3 msgid "Netspeed Applet Factory" msgstr "Verkkonopeussovelman tehdas" #: ../GNOME_NetspeedApplet.server.in.in.h:4 msgid "Network Monitor" msgstr "Verkon tarkkailija" #: ../src/netspeed.c:407 msgid "b/s" msgstr "b/s" #: ../src/netspeed.c:407 msgid "B/s" msgstr "t/s" #: ../src/netspeed.c:409 msgid "bits" msgstr "bittiä" #: ../src/netspeed.c:409 msgid "bytes" msgstr "tavua" #: ../src/netspeed.c:416 msgid "kb/s" msgstr "kt/s" #: ../src/netspeed.c:416 msgid "KiB/s" msgstr "KiB/s" #: ../src/netspeed.c:418 msgid "kb" msgstr "kt" #: ../src/netspeed.c:418 msgid "KiB" msgstr "KiB" #: ../src/netspeed.c:427 msgid "Mb/s" msgstr "Mt/s" #: ../src/netspeed.c:427 msgid "MiB/s" msgstr "MiB/s" #: ../src/netspeed.c:429 msgid "Mb" msgstr "Mt" #: ../src/netspeed.c:429 msgid "MiB" msgstr "MiB" #: ../src/netspeed.c:755 #, c-format msgid "" "There was an error displaying help:\n" "%s" msgstr "" "Virhe näytettäessä ohjetta:\n" "%s" #: ../src/netspeed.c:806 #, c-format msgid "" "Failed to show:\n" "%s" msgstr "" "Ei voitu näyttää:\n" "%s" #: ../src/netspeed.c:837 msgid "" "A little applet that displays some information on the traffic on the " "specified network device" msgstr "" "Pieni sovelma, joka näyttää tietoja halutun verkkolaitteen liikenteestä" #: ../src/netspeed.c:840 msgid "translator-credits" msgstr "" "Ilkka Tuohela, 2006\n" "\n" "http://www.gnome.fi/" #: ../src/netspeed.c:842 msgid "Netspeed Website" msgstr "Verkkonopeussovelman WWW-sivut" #: ../src/netspeed.c:968 msgid "Netspeed Preferences" msgstr "Verkkonopeuden asetukset" #: ../src/netspeed.c:991 msgid "General Settings" msgstr "Yleiset asetukset" #: ../src/netspeed.c:1012 msgid "Network _device:" msgstr "Verkko_laite:" #. Default means device with default route set #: ../src/netspeed.c:1023 msgid "Default" msgstr "Oletus" #: ../src/netspeed.c:1036 msgid "Show _sum instead of in & out" msgstr "Näytä _summa saapuvan ja lähtevän sijasta" #: ../src/netspeed.c:1040 msgid "Show _bits instead of bytes" msgstr "Näytä _bitteinä tavujen sijasta" #: ../src/netspeed.c:1044 msgid "Change _icon according to the selected device" msgstr "Vaihda _kuvaketta valitun laitteen mukaan" #: ../src/netspeed.c:1155 #, c-format msgid "Device Details for %s" msgstr "Laitteen %s yksityiskohdat" #: ../src/netspeed.c:1181 msgid "_In graph color" msgstr "_Saapuvan käyrän väri" #: ../src/netspeed.c:1182 msgid "_Out graph color" msgstr "_Lähtevän käyrän väri" #: ../src/netspeed.c:1198 msgid "Internet Address:" msgstr "IP-osoite:" #: ../src/netspeed.c:1199 msgid "Netmask:" msgstr "Verkkopeite:" #: ../src/netspeed.c:1200 msgid "Hardware Address:" msgstr "Laiteosoite:" #: ../src/netspeed.c:1201 msgid "P-t-P Address:" msgstr "PtP-osoite:" #: ../src/netspeed.c:1202 msgid "Bytes in:" msgstr "Saapunut (tavuja):" #: ../src/netspeed.c:1203 msgid "Bytes out:" msgstr "Lähtenyt (tavuja):" #: ../src/netspeed.c:1205 ../src/netspeed.c:1206 ../src/netspeed.c:1207 #: ../src/netspeed.c:1208 msgid "none" msgstr "ei mitään" #: ../src/netspeed.c:1247 msgid "IPV6 Address:" msgstr "IPv6-osoite:" #: ../src/netspeed.c:1279 msgid "Signal Strength:" msgstr "Signaalivoimakkuus:" #: ../src/netspeed.c:1280 msgid "ESSID:" msgstr "ESSID:" #: ../src/netspeed.c:1366 #, c-format msgid "Do you want to disconnect %s now?" msgstr "Haluatko katkaista laitteen %s?" #: ../src/netspeed.c:1370 #, c-format msgid "Do you want to connect %s now?" msgstr "Haluatko yhdistää laitteen %s?" #: ../src/netspeed.c:1444 #, c-format msgid "%s is down" msgstr "%s ei ole käytössä" #: ../src/netspeed.c:1449 #, c-format msgid "" "%s: %s\n" "in: %s out: %s" msgstr "" "%s: %s\n" "saapuva: %s lähtevä: %s" #: ../src/netspeed.c:1451 ../src/netspeed.c:1460 msgid "has no ip" msgstr "ei IP-osoitetta" #: ../src/netspeed.c:1458 #, c-format msgid "" "%s: %s\n" "sum: %s" msgstr "" "%s: %s\n" "yhteensä: %s" #: ../src/netspeed.c:1467 #, c-format msgid "" "\n" "ESSID: %s\n" "Strength: %d %%" msgstr "" "\n" "ESSID: %s\n" "Voimakkuus: %d %%" #: ../src/netspeed.c:1468 msgid "unknown" msgstr "tuntematon" #: ../src/netspeed.c:1515 msgid "Netspeed" msgstr "Verkkonopeus" #: ../src/netspeed.c:1683 msgid "Device _Details" msgstr "Laitteen _yksityiskohdat" #: ../src/netspeed.c:1683 msgid "_Preferences..." msgstr "_Asetukset..." #: ../src/netspeed.c:1683 msgid "_Help" msgstr "O_hje" #: ../src/netspeed.c:1683 msgid "_About..." msgstr "_Tietoja..." #~ msgid "_Always monitor a connected device, if possible" #~ msgstr "Tarkkaile _aina yhdistettyä laitetta, jos mahdollista" #~ msgid "_Update interval:" #~ msgstr "_Päivitysväli:" #~ msgid "millisecond" #~ msgstr "millisekuntia" #~ msgid "Label _font size:" #~ msgstr "Tekstin _kirjasinkoko:" #~ msgid "points" #~ msgstr "pistettä" netspeed_applet-0.16/po/sv.po0000644000175000017500000001311111402426203013132 00000000000000# Swedish translation of netspeed. # Copyright (C) 2004, 2006, 2008, 2009 Free Software Foundation, Inc. # This file is distributed under the same license as the netspeed package. # Joakim Lundborg , 2004. # Daniel Nylander , 2006, 2008, 2009. # msgid "" msgstr "" "Project-Id-Version: netspeed\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2009-04-28 09:06+0200\n" "PO-Revision-Date: 2009-04-28 09:07+0100\n" "Last-Translator: Daniel Nylander \n" "Language-Team: Swedish \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #: ../GNOME_NetspeedApplet.server.in.in.h:1 msgid "Internet" msgstr "Internet" #: ../GNOME_NetspeedApplet.server.in.in.h:2 msgid "Netspeed Applet" msgstr "Panelprogrammet Näthastighet" #: ../GNOME_NetspeedApplet.server.in.in.h:3 msgid "Netspeed Applet Factory" msgstr "Panelprogramsfabrik för Näthastighet" #: ../GNOME_NetspeedApplet.server.in.in.h:4 msgid "Network Monitor" msgstr "Nätverksövervakare" #: ../src/netspeed.c:407 msgid "b/s" msgstr "b/s" #: ../src/netspeed.c:407 msgid "B/s" msgstr "B/s" #: ../src/netspeed.c:409 msgid "bits" msgstr "bitar" #: ../src/netspeed.c:409 msgid "bytes" msgstr "byte" #: ../src/netspeed.c:416 msgid "kb/s" msgstr "kb/s" #: ../src/netspeed.c:416 msgid "KiB/s" msgstr "KiB/s" #: ../src/netspeed.c:418 msgid "kb" msgstr "kb" #: ../src/netspeed.c:418 msgid "KiB" msgstr "KiB" #: ../src/netspeed.c:427 msgid "Mb/s" msgstr "Mb/s" #: ../src/netspeed.c:427 msgid "MiB/s" msgstr "MiB/s" #: ../src/netspeed.c:429 msgid "Mb" msgstr "Mb" #: ../src/netspeed.c:429 msgid "MiB" msgstr "MiB" #: ../src/netspeed.c:755 #, c-format msgid "" "There was an error displaying help:\n" "%s" msgstr "" "Det inträffade ett fel vid visning av hjälp:\n" "%s" #: ../src/netspeed.c:806 #, c-format msgid "" "Failed to show:\n" "%s" msgstr "" "Misslyckades med att visa:\n" "%s" #: ../src/netspeed.c:837 msgid "A little applet that displays some information on the traffic on the specified network device" msgstr "Ett litet panelprogram som visar trafikinformation på en angiven nätverksenhet" #: ../src/netspeed.c:840 msgid "translator-credits" msgstr "" "Daniel Nylander \n" "Joakim Lundborg \n" "\n" "Skicka synpunkter på översättningen till\n" "tp-sv@listor.tp-sv.se" #: ../src/netspeed.c:842 msgid "Netspeed Website" msgstr "Näthastighets webbplats" #: ../src/netspeed.c:968 msgid "Netspeed Preferences" msgstr "Inställningar för Näthastighet" #: ../src/netspeed.c:991 msgid "General Settings" msgstr "Allmänna inställningar" #: ../src/netspeed.c:1012 msgid "Network _device:" msgstr "Nätverks_enhet:" #. Default means device with default route set #: ../src/netspeed.c:1023 msgid "Default" msgstr "Standard" #: ../src/netspeed.c:1036 msgid "Show _sum instead of in & out" msgstr "Visa _summa istället för in och ut" #: ../src/netspeed.c:1040 msgid "Show _bits instead of bytes" msgstr "Visa _bitar istället för byte" #: ../src/netspeed.c:1044 msgid "Change _icon according to the selected device" msgstr "Ändra _ikon efter den valda enheten" #: ../src/netspeed.c:1155 #, c-format msgid "Device Details for %s" msgstr "Enhetsdetaljer för %s" #: ../src/netspeed.c:1181 msgid "_In graph color" msgstr "_Indiagramfärg" #: ../src/netspeed.c:1182 msgid "_Out graph color" msgstr "_Utdiagramfärg" #: ../src/netspeed.c:1198 msgid "Internet Address:" msgstr "Internetadress:" #: ../src/netspeed.c:1199 msgid "Netmask:" msgstr "Nätmask:" #: ../src/netspeed.c:1200 msgid "Hardware Address:" msgstr "Hårdvaruadress:" #: ../src/netspeed.c:1201 msgid "P-t-P Address:" msgstr "P-t-P-adress:" #: ../src/netspeed.c:1202 msgid "Bytes in:" msgstr "Byte in:" #: ../src/netspeed.c:1203 msgid "Bytes out:" msgstr "Byte ut:" #: ../src/netspeed.c:1205 #: ../src/netspeed.c:1206 #: ../src/netspeed.c:1207 #: ../src/netspeed.c:1208 msgid "none" msgstr "ingen" #: ../src/netspeed.c:1247 msgid "IPv6 Address:" msgstr "IPv6-adress:" #: ../src/netspeed.c:1279 msgid "Signal Strength:" msgstr "Signalstyrka:" #: ../src/netspeed.c:1280 msgid "ESSID:" msgstr "ESSID:" #: ../src/netspeed.c:1366 #, c-format msgid "Do you want to disconnect %s now?" msgstr "Vill du koppla från %s nu?" #: ../src/netspeed.c:1370 #, c-format msgid "Do you want to connect %s now?" msgstr "Vill du ansluta till %s nu?" #: ../src/netspeed.c:1444 #, c-format msgid "%s is down" msgstr "%s är nere" #: ../src/netspeed.c:1449 #, c-format msgid "" "%s: %s\n" "in: %s out: %s" msgstr "" "%s: %s\n" "in: %s ut: %s" #: ../src/netspeed.c:1451 #: ../src/netspeed.c:1460 msgid "has no ip" msgstr "har ingen ip-adress" #: ../src/netspeed.c:1458 #, c-format msgid "" "%s: %s\n" "sum: %s" msgstr "" "%s:·%s\n" "summa:·%s" #: ../src/netspeed.c:1467 #, c-format msgid "" "\n" "ESSID: %s\n" "Strength: %d %%" msgstr "" "\n" "ESSID: %s\n" "Styrka: %d %%" #: ../src/netspeed.c:1468 msgid "unknown" msgstr "okänt" #: ../src/netspeed.c:1515 msgid "Netspeed" msgstr "Näthastighet" #: ../src/netspeed.c:1683 msgid "Device _Details" msgstr "Enhets_detaljer" #: ../src/netspeed.c:1683 msgid "_Preferences..." msgstr "_Inställningar..." #: ../src/netspeed.c:1683 msgid "_Help" msgstr "_Hjälp" #: ../src/netspeed.c:1683 msgid "_About..." msgstr "_Om..." #~ msgid "_Always monitor a connected device, if possible" #~ msgstr "Övervaka _alltid en ansluten enhet, om möjligt" #~ msgid "_Update interval:" #~ msgstr "_Uppdateringsintervall:" #~ msgid "millisecond" #~ msgstr "millisekund" #~ msgid "Label _font size:" #~ msgstr "_Typsnittsstorlek:" #~ msgid "points" #~ msgstr "punkter" netspeed_applet-0.16/po/fr.po0000644000175000017500000001330611402426203013117 00000000000000# traduction de netspeed_applet # Copyright (C) 2002-2008 THE NetSpeed_applet'S COPYRIGHT HOLDER # This file is distributed under the same license as the NetSpeed_applet package. # # Benoît Dejean , 2005-2006. # Christophe Merlet , 2002. # Baptiste MILLE-MATHIAS , 2002. # Sebastien Bacher , 2005. # msgid "" msgstr "" "Project-Id-Version: netspeed_applet 0.14\n" "Report-Msgid-Bugs-To: http://bugzilla.gnome.org/enter_bug.cgi?" "product=netspeed&component=general\n" "POT-Creation-Date: 2009-04-27 05:43+0000\n" "PO-Revision-Date: 2008-08-13 15:04:22+0200\n" "Last-Translator: Robert-André Mauchin \n" "Language-Team: GNOME French Team \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #: ../GNOME_NetspeedApplet.server.in.in.h:1 msgid "Internet" msgstr "Internet" #: ../GNOME_NetspeedApplet.server.in.in.h:2 msgid "Netspeed Applet" msgstr "Applet Netspeed" #: ../GNOME_NetspeedApplet.server.in.in.h:3 msgid "Netspeed Applet Factory" msgstr "Usine Netspeed Applet" #: ../GNOME_NetspeedApplet.server.in.in.h:4 msgid "Network Monitor" msgstr "Moniteur réseau" #: ../src/netspeed.c:407 msgid "b/s" msgstr "b/s" #: ../src/netspeed.c:407 msgid "B/s" msgstr "O/s" #: ../src/netspeed.c:409 msgid "bits" msgstr "bits" #: ../src/netspeed.c:409 msgid "bytes" msgstr "octets" #: ../src/netspeed.c:416 msgid "kb/s" msgstr "kb/s" #: ../src/netspeed.c:416 msgid "KiB/s" msgstr "Kio/s" #: ../src/netspeed.c:418 msgid "kb" msgstr "kb" #: ../src/netspeed.c:418 msgid "KiB" msgstr "Kio" #: ../src/netspeed.c:427 msgid "Mb/s" msgstr "Mb/s" #: ../src/netspeed.c:427 msgid "MiB/s" msgstr "Mio/s" #: ../src/netspeed.c:429 msgid "Mb" msgstr "Mb" #: ../src/netspeed.c:429 msgid "MiB" msgstr "Mio" #: ../src/netspeed.c:755 #, c-format msgid "" "There was an error displaying help:\n" "%s" msgstr "" "Une erreur est survenue lors de l'affichage de l'aide :\n" "%s" #: ../src/netspeed.c:806 #, c-format msgid "" "Failed to show:\n" "%s" msgstr "" "Échec de l'affichage :\n" "%s" #: ../src/netspeed.c:837 msgid "" "A little applet that displays some information on the traffic on the " "specified network device" msgstr "" "Un petit applet qui affiche quelques informations sur le trafic d'un " "périphérique réseau" #: ../src/netspeed.c:840 msgid "translator-credits" msgstr "" "Benoît Dejean , 2005-2006.\n" "Christophe Merlet , 2002.\n" "Baptiste MILLE-MATHIAS , 2002.\n" "Sebastien Bacher , 2005." #: ../src/netspeed.c:842 msgid "Netspeed Website" msgstr "Site web de Netspeed" #: ../src/netspeed.c:968 msgid "Netspeed Preferences" msgstr "Préférences de Netspeed" #: ../src/netspeed.c:991 msgid "General Settings" msgstr "Paramètres généraux :" #: ../src/netspeed.c:1012 msgid "Network _device:" msgstr "_Périphérique réseau :" #. Default means device with default route set #: ../src/netspeed.c:1023 msgid "Default" msgstr "Par défaut" #: ../src/netspeed.c:1036 msgid "Show _sum instead of in & out" msgstr "Afficher la _somme à la place d'entrants et sortants" #: ../src/netspeed.c:1040 msgid "Show _bits instead of bytes" msgstr "Afficher des _bits au lieu d'octets" #: ../src/netspeed.c:1044 msgid "Change _icon according to the selected device" msgstr "Modifie l'_icône selon le périphérique choisi" #: ../src/netspeed.c:1155 #, c-format msgid "Device Details for %s" msgstr "Détails du périphérique pour %s" #: ../src/netspeed.c:1181 msgid "_In graph color" msgstr "Couleur du _graphe des données rentrantes" #: ../src/netspeed.c:1182 msgid "_Out graph color" msgstr "Couleur du graphe des données s_ortantes" #: ../src/netspeed.c:1198 msgid "Internet Address:" msgstr "Adresse IP :" #: ../src/netspeed.c:1199 msgid "Netmask:" msgstr "Masque de réseau :" #: ../src/netspeed.c:1200 msgid "Hardware Address:" msgstr "Adresse MAC :" #: ../src/netspeed.c:1201 msgid "P-t-P Address:" msgstr "Adresse P-t-P :" #: ../src/netspeed.c:1202 msgid "Bytes in:" msgstr "Octets entrants :" #: ../src/netspeed.c:1203 msgid "Bytes out:" msgstr "Octets sortants :" #: ../src/netspeed.c:1205 ../src/netspeed.c:1206 ../src/netspeed.c:1207 #: ../src/netspeed.c:1208 msgid "none" msgstr "aucun" #: ../src/netspeed.c:1247 msgid "IPv6 Address:" msgstr "Adresse IPv6 :" #: ../src/netspeed.c:1279 msgid "Signal Strength:" msgstr "Puissance du signal :" #: ../src/netspeed.c:1280 msgid "ESSID:" msgstr "ESSID :" #: ../src/netspeed.c:1366 #, c-format msgid "Do you want to disconnect %s now?" msgstr "Voulez-vous déconnecter %s maintenant ?" #: ../src/netspeed.c:1370 #, c-format msgid "Do you want to connect %s now?" msgstr "Voulez-vous connecter %s maintenant ?" #: ../src/netspeed.c:1444 #, c-format msgid "%s is down" msgstr "%s est arrêtée" #: ../src/netspeed.c:1449 #, c-format msgid "" "%s: %s\n" "in: %s out: %s" msgstr "" "%s : %s\n" "entrants : %s sortants : %s" #: ../src/netspeed.c:1451 ../src/netspeed.c:1460 msgid "has no ip" msgstr "n'a pas d'IP" #: ../src/netspeed.c:1458 #, c-format msgid "" "%s: %s\n" "sum: %s" msgstr "" "%s : %s\n" "somme : %s" #: ../src/netspeed.c:1467 #, c-format msgid "" "\n" "ESSID: %s\n" "Strength: %d %%" msgstr "" "\n" "ESSID : %s\n" "Puissance : %d %%" #: ../src/netspeed.c:1468 msgid "unknown" msgstr "inconnu" #: ../src/netspeed.c:1515 msgid "Netspeed" msgstr "Netspeed" #: ../src/netspeed.c:1683 msgid "Device _Details" msgstr "_Détails du périphérique" #: ../src/netspeed.c:1683 msgid "_Preferences..." msgstr "_Préférences..." #: ../src/netspeed.c:1683 msgid "_Help" msgstr "Aid_e" #: ../src/netspeed.c:1683 msgid "_About..." msgstr "À _propos..." netspeed_applet-0.16/po/zh_CN.po0000644000175000017500000001210511402426203013505 00000000000000# Netspeed applet zh_CN.po # Copyright (C) 2002 Zhengang Li # This file is distributed under the same license as the Netspeed package. # Zhengang Li , 2002. # msgid "" msgstr "" "Project-Id-Version: Netspeed Applet 1.0\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2005-09-29 23:49+0800\n" "PO-Revision-Date: 2005-09-30 00:03+0800\n" "Last-Translator: Zhengang Li \n" "Language-Team: Simplified Chinese \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit" #: ../GNOME_NetspeedApplet.server.in.h:1 msgid "Internet" msgstr "互联网" #: ../GNOME_NetspeedApplet.server.in.h:2 msgid "Netspeed Applet" msgstr "Netspeed" #: ../GNOME_NetspeedApplet.server.in.h:3 msgid "Netspeed Applet Factory" msgstr "Netspeed 小程序组件" #: ../GNOME_NetspeedApplet.server.in.h:4 msgid "Network Monitor" msgstr "网络监视器" #: ../src/netspeed.c:269 msgid "b/s" msgstr "b/s" #: ../src/netspeed.c:269 msgid "B/s" msgstr "B/s" #: ../src/netspeed.c:269 msgid "byte" msgstr "字节" #: ../src/netspeed.c:272 ../src/netspeed.c:275 msgid "kb/s" msgstr "kb/s" #: ../src/netspeed.c:272 ../src/netspeed.c:275 msgid "kB/s" msgstr "kB/s" #: ../src/netspeed.c:272 ../src/netspeed.c:275 msgid "kbyte" msgstr "千字节" #: ../src/netspeed.c:277 msgid "Mb/s" msgstr "Mb/s" #: ../src/netspeed.c:277 msgid "MB/s" msgstr "MB/s" #: ../src/netspeed.c:277 msgid "Mbyte" msgstr "兆字节" #: ../src/netspeed.c:473 #, c-format msgid "" "%s :%s\n" "in: %s out: %s" msgstr "" "%s :%s\n" "接收: %s 发送: %s" #: ../src/netspeed.c:475 ../src/netspeed.c:480 msgid "has no ip" msgstr "没有 IP" #: ../src/netspeed.c:478 #, c-format msgid "" "%s: %s\n" "sum: %s" msgstr "" "%s: %s\n" "共: %s" #: ../src/netspeed.c:489 #, c-format msgid "%s is down" msgstr "%s 已经断开" #: ../src/netspeed.c:609 msgid "Netspeed Website" msgstr "Netspeed 网站" #. Feel free to put your names here translators :-) #: ../src/netspeed.c:613 msgid "TRANSLATORS" msgstr "李振刚 \n" "杨红 " #: ../src/netspeed.c:622 msgid "Netspeed" msgstr "Netspeed" #: ../src/netspeed.c:625 msgid "" "A little applet that displays some information on the traffic on the " "specified network device" msgstr "Netspeed显示指定网络设备上的流量信息." #: ../src/netspeed.c:681 #, c-format msgid "" "There was an error displaying help:\n" "%s" msgstr "显示帮助时出错了：\n" "%s" #: ../src/netspeed.c:823 msgid "Netspeed Preferences" msgstr "Netspeed 首选项" #: ../src/netspeed.c:846 msgid "General Settings" msgstr "普通设置：" #: ../src/netspeed.c:867 msgid "Network _device:" msgstr "网络设备(_D)：" #: ../src/netspeed.c:891 msgid "_Update interval:" msgstr "刷新间隔(_U)：" #: ../src/netspeed.c:907 msgid "millisecond" msgstr "毫秒" #: ../src/netspeed.c:916 msgid "Label _font size:" msgstr "标签字体大小(_F)：" #: ../src/netspeed.c:932 msgid "points" msgstr "象素" #: ../src/netspeed.c:938 msgid "Show _sum instead of in & out" msgstr "只显示接受发送流量总和(_S)" #: ../src/netspeed.c:942 msgid "Show _bits/s (b/s) instead of bytes/s (B/s)" msgstr "以位每秒(b/s)作单位，不使用字节每秒(B/s)(_B)" #: ../src/netspeed.c:946 msgid "Change _icon according to the selected device" msgstr "根据指定的设备改变图标" #: ../src/netspeed.c:951 msgid "_Always monitor a connected device, if possible" msgstr "一直监视已经连接的设备(_A)。" #: ../src/netspeed.c:1070 #, c-format msgid "Device Details for %s" msgstr "设备 %s 的详细信息" #: ../src/netspeed.c:1096 msgid "_In graph color" msgstr "接收图像颜色(_I)" #: ../src/netspeed.c:1097 msgid "_Out graph color" msgstr "发送图像颜色(_O)" #: ../src/netspeed.c:1113 msgid "Internet Address:" msgstr "IP 地址：" #: ../src/netspeed.c:1114 msgid "Netmask:" msgstr "网络掩码：" #: ../src/netspeed.c:1115 msgid "Hardware Address:" msgstr "硬件地址：" #: ../src/netspeed.c:1116 msgid "P-t-P Address:" msgstr "P-t-P 地址：" #: ../src/netspeed.c:1117 msgid "Bytes in:" msgstr "接受字节：" #: ../src/netspeed.c:1118 msgid "Bytes out:" msgstr "发送字节：" #: ../src/netspeed.c:1120 ../src/netspeed.c:1121 ../src/netspeed.c:1122 #: ../src/netspeed.c:1123 msgid "none" msgstr "无" #: ../src/netspeed.c:1162 msgid "IPV6 Address:" msgstr "IPV6 地址：" #: ../src/netspeed.c:1269 #, c-format msgid "Do you want to disconnect %s now?" msgstr "你要断开 %s 的连接吗？" #: ../src/netspeed.c:1273 #, c-format msgid "Do you want to connect %s now?" msgstr "你要现在就连接到 %s 吗？" #: ../src/netspeed.c:1500 msgid "Device _Details" msgstr "设备详细信息(_D)" #: ../src/netspeed.c:1500 msgid "_Preferences..." msgstr "首选项(P)" #: ../src/netspeed.c:1500 msgid "_Help" msgstr "帮助(_H)" #: ../src/netspeed.c:1500 msgid "_About..." msgstr "关于(A)" #~ msgid "Netspeed Applet Settings" #~ msgstr "Netspeed小程序设置" #~ msgid "Device %s" #~ msgstr "设备 %s" #~ msgid "Refreshes per second:" #~ msgstr "每秒刷新次数:" #~ msgid "0 b/s" #~ msgstr "0 b/s" netspeed_applet-0.16/po/LINGUAS0000644000175000017500000000023211402426203013167 00000000000000# please keep this list sorted alphabetically # ar cs da de el es et eu fi fr gl gu hu id it ja lt ms nb nl oc pa pl ps pt pt_BR ro ru sl sv tr uk zh_CN netspeed_applet-0.16/po/gl.po0000644000175000017500000001223711402426203013114 00000000000000# Galician translation for netspeed. # Copyright (C) 2009 netspeed's COPYRIGHT HOLDER # This file is distributed under the same license as the netspeed package. # Fran Diéguez , 2009. # msgid "" msgstr "" "Project-Id-Version: netspeed master\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2009-09-15 23:09+0200\n" "PO-Revision-Date: 2009-09-07 14:31+0200\n" "Last-Translator: Francisco Diéguez \n" "Language-Team: Galician <>\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #: ../GNOME_NetspeedApplet.server.in.in.h:1 msgid "Internet" msgstr "Internet" #: ../GNOME_NetspeedApplet.server.in.in.h:2 msgid "Netspeed Applet" msgstr "Applet Netspeed" #: ../GNOME_NetspeedApplet.server.in.in.h:3 msgid "Netspeed Applet Factory" msgstr "Fábrica do aplet Netspeed" #: ../GNOME_NetspeedApplet.server.in.in.h:4 msgid "Network Monitor" msgstr "Monitor de rede" #: ../src/netspeed.c:407 msgid "b/s" msgstr "b/s" #: ../src/netspeed.c:407 msgid "B/s" msgstr "B/s" #: ../src/netspeed.c:409 msgid "bits" msgstr "bits" #: ../src/netspeed.c:409 msgid "bytes" msgstr "bytes" #: ../src/netspeed.c:416 msgid "kb/s" msgstr "kb/s" #: ../src/netspeed.c:416 msgid "KiB/s" msgstr "KiB/s" #: ../src/netspeed.c:418 msgid "kb" msgstr "kb" #: ../src/netspeed.c:418 msgid "KiB" msgstr "KiB" #: ../src/netspeed.c:427 msgid "Mb/s" msgstr "Mb/s" #: ../src/netspeed.c:427 msgid "MiB/s" msgstr "MiB/s" #: ../src/netspeed.c:429 msgid "Mb" msgstr "Mb" #: ../src/netspeed.c:429 msgid "MiB" msgstr "MiB" #: ../src/netspeed.c:755 #, c-format msgid "" "There was an error displaying help:\n" "%s" msgstr "" "Houbo un erro ao mostrar a axuda:\n" "%s" #: ../src/netspeed.c:806 #, c-format msgid "" "Failed to show:\n" "%s" msgstr "" "Ocorreu un erro ao mostrar:\n" "%s" #: ../src/netspeed.c:837 msgid "" "A little applet that displays some information on the traffic on the " "specified network device" msgstr "" "Un pequeno applet que mostra algunha información do tráfico dun dispositivo " "de rede especificado" #: ../src/netspeed.c:840 msgid "translator-credits" msgstr "Fran Diéguez " #: ../src/netspeed.c:842 msgid "Netspeed Website" msgstr "Sitio web de Netspeed" #: ../src/netspeed.c:968 msgid "Netspeed Preferences" msgstr "Preferenzas de Netspeed" #: ../src/netspeed.c:991 msgid "General Settings" msgstr "Configuracións xerais" #: ../src/netspeed.c:1012 msgid "Network _device:" msgstr "_Dispositivo de rede:" #. Default means device with default route set #: ../src/netspeed.c:1023 msgid "Default" msgstr "Predefinido" #: ../src/netspeed.c:1036 msgid "Show _sum instead of in & out" msgstr "Mostrar a _suma no canto de entrada & saída" #: ../src/netspeed.c:1040 msgid "Show _bits instead of bytes" msgstr "Mostrar _bits no canto de bytes" #: ../src/netspeed.c:1044 msgid "Change _icon according to the selected device" msgstr "Cambiar a _icona de acordo ao dispositivo seleccionado" #: ../src/netspeed.c:1155 #, c-format msgid "Device Details for %s" msgstr "Detalles do dispositivo para %s" #: ../src/netspeed.c:1181 msgid "_In graph color" msgstr "Cor da _entrada no gráfico" #: ../src/netspeed.c:1182 msgid "_Out graph color" msgstr "Cor da _saída do gráfico" #: ../src/netspeed.c:1198 msgid "Internet Address:" msgstr "Enderezo de internet:" #: ../src/netspeed.c:1199 msgid "Netmask:" msgstr "Máscara de rede:" #: ../src/netspeed.c:1200 msgid "Hardware Address:" msgstr "Enderezo de hardware:" #: ../src/netspeed.c:1201 msgid "P-t-P Address:" msgstr "Enderezo P-t-P:" #: ../src/netspeed.c:1202 msgid "Bytes in:" msgstr "Bytes de entrada:" #: ../src/netspeed.c:1203 msgid "Bytes out:" msgstr "Bytes de saída:" #: ../src/netspeed.c:1205 ../src/netspeed.c:1206 ../src/netspeed.c:1207 #: ../src/netspeed.c:1208 msgid "none" msgstr "ningún" #: ../src/netspeed.c:1247 msgid "IPv6 Address:" msgstr "Enderezo IPv6:" #: ../src/netspeed.c:1279 msgid "Signal Strength:" msgstr "Potencia de sinal:" #: ../src/netspeed.c:1280 msgid "ESSID:" msgstr "ESSID:" #: ../src/netspeed.c:1366 #, c-format msgid "Do you want to disconnect %s now?" msgstr "Quere desconectar %s agora mesmo?" #: ../src/netspeed.c:1370 #, c-format msgid "Do you want to connect %s now?" msgstr "Quere conectar %s agora mesmo?" #: ../src/netspeed.c:1444 #, c-format msgid "%s is down" msgstr "%s está apagado" #: ../src/netspeed.c:1449 #, c-format msgid "" "%s: %s\n" "in: %s out: %s" msgstr "" "%s: %s\n" "entrada: %s saída: %s" #: ../src/netspeed.c:1451 ../src/netspeed.c:1460 msgid "has no ip" msgstr "non ten ip" #: ../src/netspeed.c:1458 #, c-format msgid "" "%s: %s\n" "sum: %s" msgstr "" "%s: %s\n" "suma: %s" #: ../src/netspeed.c:1467 #, c-format msgid "" "\n" "ESSID: %s\n" "Strength: %d %%" msgstr "" "\n" "ESSID: %s\n" "Potencia: %d %%" #: ../src/netspeed.c:1468 msgid "unknown" msgstr "descoñecido" #: ../src/netspeed.c:1515 msgid "Netspeed" msgstr "Netspeed" #: ../src/netspeed.c:1683 msgid "Device _Details" msgstr "_Detalles do dispositivo" #: ../src/netspeed.c:1683 msgid "_Preferences..." msgstr "_Preferenzas..." #: ../src/netspeed.c:1683 msgid "_Help" msgstr "_Axuda" #: ../src/netspeed.c:1683 msgid "_About..." msgstr "_Sobre..." netspeed_applet-0.16/po/ms.po0000644000175000017500000001122111402426203013121 00000000000000# Malay translation of netspeed. # Copyright (C) 2002 THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # Hasbullah Bin Pit (sebol) , 2002. # msgid "" msgstr "" "Project-Id-Version: netspeed\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2005-04-11 03:07+0200\n" "PO-Revision-Date: 2002-08-23 15:20+0200\n" "Last-Translator: Hasbullah Bin Pit (sebol) \n" "Language-Team: Malay \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #: ../GNOME_NetspeedApplet.server.in.h:1 msgid "Internet" msgstr "Internet" #: ../GNOME_NetspeedApplet.server.in.h:2 msgid "Netspeed Applet" msgstr "Aplet Netspeed" #: ../GNOME_NetspeedApplet.server.in.h:3 msgid "Netspeed Applet Factory" msgstr "Kilang Aplet Netspeed" #: ../GNOME_NetspeedApplet.server.in.h:4 msgid "Network Monitor" msgstr "" #: ../src/netspeed.c:276 msgid "b/s" msgstr "b/s" #: ../src/netspeed.c:276 msgid "B/s" msgstr "B/s" #: ../src/netspeed.c:276 msgid "byte" msgstr "byte" #: ../src/netspeed.c:279 ../src/netspeed.c:282 msgid "kb/s" msgstr "kb/s" #: ../src/netspeed.c:279 ../src/netspeed.c:282 msgid "kB/s" msgstr "kB/s" #: ../src/netspeed.c:279 ../src/netspeed.c:282 msgid "kbyte" msgstr "kbyte" #: ../src/netspeed.c:284 msgid "Mb/s" msgstr "Mb/s" #: ../src/netspeed.c:284 msgid "MB/s" msgstr "MB/s" #: ../src/netspeed.c:284 msgid "Mbyte" msgstr "Mbyte" #: ../src/netspeed.c:468 #, c-format msgid "" "%s :%s\n" "in: %s out: %s" msgstr "" "%s :%s\n" "masuk: %s keluart: %s" #: ../src/netspeed.c:469 ../src/netspeed.c:472 msgid "has no ip" msgstr "tidak mempunyai IP" #: ../src/netspeed.c:471 #, c-format msgid "" "%s: %s\n" "sum: %s" msgstr "" "%s: %s\n" "jumlah: %s" #: ../src/netspeed.c:479 #, c-format msgid "%s is down" msgstr "" #. Feel free to put your names here translators :-) #: ../src/netspeed.c:590 msgid "TRANSLATORS" msgstr "Hasbullah Bin Pit , Merlimau." #: ../src/netspeed.c:595 #, fuzzy msgid "Netspeed" msgstr "Aplet Netspeed" #: ../src/netspeed.c:598 msgid "" "A little applet that displays some information on the traffic on the " "specified network device" msgstr "" "Aplet kecil yang memaparkan maklumat trafik pada peranti rangkaian tertentu" #: ../src/netspeed.c:791 msgid "Netspeed Preferences" msgstr "" #: ../src/netspeed.c:814 #, fuzzy msgid "General Settings" msgstr "Tetapan:" #: ../src/netspeed.c:835 #, fuzzy msgid "Network _device:" msgstr "Peranti rangkaian:" #: ../src/netspeed.c:859 msgid "_Update interval:" msgstr "" #: ../src/netspeed.c:875 msgid "millisecond" msgstr "" #: ../src/netspeed.c:884 msgid "Label _font size:" msgstr "" #: ../src/netspeed.c:900 msgid "points" msgstr "" #: ../src/netspeed.c:906 #, fuzzy msgid "Show _sum instead of in & out" msgstr "Papar jumlah selain dari masuk & keluar" #: ../src/netspeed.c:910 #, fuzzy msgid "Show _bits/s (b/s) instead of bytes/s (B/s)" msgstr "Papar bin/s (b/s) selain byte/s (B/s)" #: ../src/netspeed.c:914 #, fuzzy msgid "Change _icon according to the selected device" msgstr "Tukar ikon mengikut peranti dipilih" #: ../src/netspeed.c:919 msgid "_Always monitor a connected device, if possible" msgstr "" #: ../src/netspeed.c:1041 #, c-format msgid "Device Details for %s" msgstr "Perincian Peranti bagi %s" #: ../src/netspeed.c:1067 msgid "_In graph color" msgstr "" #: ../src/netspeed.c:1068 msgid "_Out graph color" msgstr "" #: ../src/netspeed.c:1087 msgid "Internet Address:" msgstr "Alamat Internet:" #: ../src/netspeed.c:1088 msgid "Netmask:" msgstr "Netmask:" #: ../src/netspeed.c:1089 msgid "Hardware Address:" msgstr "Alamat Perkakasan:" #: ../src/netspeed.c:1090 msgid "P-t-P Address:" msgstr "Alamat P-t-P:" #: ../src/netspeed.c:1091 msgid "Bytes in:" msgstr "Byte masuk:" #: ../src/netspeed.c:1092 msgid "Bytes out:" msgstr "Byte keluar:" #: ../src/netspeed.c:1094 ../src/netspeed.c:1095 ../src/netspeed.c:1096 #: ../src/netspeed.c:1097 msgid "none" msgstr "tiada" #: ../src/netspeed.c:1226 #, c-format msgid "Do you want to disconnect %s now?" msgstr "" #: ../src/netspeed.c:1230 #, c-format msgid "Do you want to connect %s now?" msgstr "" #: ../src/netspeed.c:1455 #, fuzzy msgid "Device _Details" msgstr "Perincian Peranti..." #: ../src/netspeed.c:1455 #, fuzzy msgid "_Preferences..." msgstr "Ciri-ciri..." #: ../src/netspeed.c:1455 msgid "_Help" msgstr "" #: ../src/netspeed.c:1455 #, fuzzy msgid "_About..." msgstr "Perihal..." #~ msgid "Netspeed Applet Settings" #~ msgstr "Tetapan Aplet NetSpeed" #~ msgid "Device %s" #~ msgstr "Peranti %s" #~ msgid "Refreshes per second:" #~ msgstr "Segar per saat:" #~ msgid "0 b/s" #~ msgstr "0 b/s" netspeed_applet-0.16/mkinstalldirs0000755000175000017500000000672211402461244014350 00000000000000#! /bin/sh # mkinstalldirs --- make directory hierarchy scriptversion=2009-04-28.21; # UTC # Original author: Noah Friedman # Created: 1993-05-16 # Public domain. # # This file is maintained in Automake, please report # bugs to or send patches to # . nl=' ' IFS=" "" $nl" errstatus=0 dirmode= usage="\ Usage: mkinstalldirs [-h] [--help] [--version] [-m MODE] DIR ... Create each directory DIR (with mode MODE, if specified), including all leading file name components. Report bugs to ." # process command line arguments while test $# -gt 0 ; do case $1 in -h | --help | --h*) # -h for help echo "$usage" exit $? ;; -m) # -m PERM arg shift test $# -eq 0 && { echo "$usage" 1>&2; exit 1; } dirmode=$1 shift ;; --version) echo "$0 $scriptversion" exit $? ;; --) # stop option processing shift break ;; -*) # unknown option echo "$usage" 1>&2 exit 1 ;; *) # first non-opt arg break ;; esac done for file do if test -d "$file"; then shift else break fi done case $# in 0) exit 0 ;; esac # Solaris 8's mkdir -p isn't thread-safe. If you mkdir -p a/b and # mkdir -p a/c at the same time, both will detect that a is missing, # one will create a, then the other will try to create a and die with # a "File exists" error. This is a problem when calling mkinstalldirs # from a parallel make. We use --version in the probe to restrict # ourselves to GNU mkdir, which is thread-safe. case $dirmode in '') if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then echo "mkdir -p -- $*" exec mkdir -p -- "$@" else # On NextStep and OpenStep, the `mkdir' command does not # recognize any option. It will interpret all options as # directories to create, and then abort because `.' already # exists. test -d ./-p && rmdir ./-p test -d ./--version && rmdir ./--version fi ;; *) if mkdir -m "$dirmode" -p --version . >/dev/null 2>&1 && test ! -d ./--version; then echo "mkdir -m $dirmode -p -- $*" exec mkdir -m "$dirmode" -p -- "$@" else # Clean up after NextStep and OpenStep mkdir. for d in ./-m ./-p ./--version "./$dirmode"; do test -d $d && rmdir $d done fi ;; esac for file do case $file in /*) pathcomp=/ ;; *) pathcomp= ;; esac oIFS=$IFS IFS=/ set fnord $file shift IFS=$oIFS for d do test "x$d" = x && continue pathcomp=$pathcomp$d case $pathcomp in -*) pathcomp=./$pathcomp ;; esac if test ! -d "$pathcomp"; then echo "mkdir $pathcomp" mkdir "$pathcomp" || lasterr=$? if test ! -d "$pathcomp"; then errstatus=$lasterr else if test ! -z "$dirmode"; then echo "chmod $dirmode $pathcomp" lasterr= chmod "$dirmode" "$pathcomp" || lasterr=$? if test ! -z "$lasterr"; then errstatus=$lasterr fi fi fi fi pathcomp=$pathcomp/ done done exit $errstatus # Local Variables: # mode: shell-script # sh-indentation: 2 # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC" # time-stamp-end: "; # UTC" # End: netspeed_applet-0.16/netspeed_applet.spec.in0000644000175000017500000000155511402426203016172 00000000000000Summary: Applet that shows traffic on a network device Name: netspeed_applet Version: @VERSION@ Release: 1 URL: http://mfcn.ilo.de/netspeed_applet/ Source0: %{name}-%{version}.tar.gz License: GPL Group: Gnome/Applets BuildRoot: %{_tmppath}/%{name}-%{version}-root Prefix: %{_prefix} BuildRequires: pkgconfig BuildRequires: intltool BuildRequires: gnome-panel-devel BuildRequires: libgnomeui-devel BuildRequires: libgtop-devel %description netspeed_applet is a little GNOME applet that shows the traffic on a specified network device (for example eth0) in kbytes/s. %prep %setup -q %build %configure %__make %install rm -rf %{buildroot} %makeinstall %find_lang netspeed_applet %clean rm -rf %{buildroot} %files -f netspeed_applet.lang %defattr(-,root,root) %doc AUTHORS COPYING NEWS README TODO %{prefix}/libexec/* %{prefix}/lib/bonobo/servers/* %{prefix}/share/pixmaps/*