obexftp-0.23/0000777000076600000240000000000011146603263010113 500000000000000obexftp-0.23/compile0000755000076600000240000000717311146600665011420 00000000000000#! /bin/sh # Wrapper for compilers which do not understand `-c -o'. scriptversion=2005-05-14.22 # Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc. # Written by Tom Tromey . # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # This file is maintained in Automake, please report # bugs to or send patches to # . case $1 in '') echo "$0: No command. Try \`$0 --help' for more information." 1>&2 exit 1; ;; -h | --h*) cat <<\EOF Usage: compile [--help] [--version] PROGRAM [ARGS] Wrapper for compilers which do not understand `-c -o'. Remove `-o dest.o' from ARGS, run PROGRAM with the remaining arguments, and rename the output as expected. If you are trying to build a whole package this is not the right script to run: please start by reading the file `INSTALL'. Report bugs to . EOF exit $? ;; -v | --v*) echo "compile $scriptversion" exit $? ;; esac ofile= cfile= eat= for arg do if test -n "$eat"; then eat= else case $1 in -o) # configure might choose to run compile as `compile cc -o foo foo.c'. # So we strip `-o arg' only if arg is an object. eat=1 case $2 in *.o | *.obj) ofile=$2 ;; *) set x "$@" -o "$2" shift ;; esac ;; *.c) cfile=$1 set x "$@" "$1" shift ;; *) set x "$@" "$1" shift ;; esac fi shift done if test -z "$ofile" || test -z "$cfile"; then # If no `-o' option was seen then we might have been invoked from a # pattern rule where we don't need one. That is ok -- this is a # normal compilation that the losing compiler can handle. If no # `.c' file was seen then we are probably linking. That is also # ok. exec "$@" fi # Name of file we expect compiler to create. cofile=`echo "$cfile" | sed -e 's|^.*/||' -e 's/\.c$/.o/'` # Create the lock directory. # Note: use `[/.-]' here to ensure that we don't use the same name # that we are using for the .o file. Also, base the name on the expected # object file name, since that is what matters with a parallel build. lockdir=`echo "$cofile" | sed -e 's|[/.-]|_|g'`.d while true; do if mkdir "$lockdir" >/dev/null 2>&1; then break fi sleep 1 done # FIXME: race condition here if user kills between mkdir and trap. trap "rmdir '$lockdir'; exit 1" 1 2 15 # Run the compile. "$@" ret=$? if test -f "$cofile"; then mv "$cofile" "$ofile" elif test -f "${cofile}bj"; then mv "${cofile}bj" "$ofile" fi rmdir "$lockdir" exit $ret # Local Variables: # mode: shell-script # sh-indentation: 2 # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-end: "$" # End: obexftp-0.23/includes/0000777000076600000240000000000011146603263011721 500000000000000obexftp-0.23/includes/common.h0000644000076600000240000000315511146600644013302 00000000000000/** \file includes/common.h ObexFTP common macros and debugging. ObexFTP library - language bindings for OBEX file transfer. */ #ifndef _OBEXFTP_COMMON_H #define _OBEXFTP_COMMON_H #ifdef HAVE_CONFIG_H #include "config.h" #endif #include #ifdef UNUSED #elif defined(__GNUC__) # define UNUSED(x) UNUSED_ ## x __attribute__((unused)) #elif defined(__LCLINT__) # define UNUSED(x) /*@unused@*/ x #else # define UNUSED(x) x #endif #ifndef FALSE #define FALSE (0) #endif #ifndef TRUE #define TRUE (!FALSE) #endif /* these are not asserts! dont define to nothing */ #define return_if_fail(expr) do { if (!(expr)) return; } while(0); #define return_val_if_fail(expr,val) do { if (!(expr)) return val; } while(0); #ifdef _WIN32 #define snprintf _snprintf #endif /* _WIN32 */ /* use 0 for production, 1 for verification, >2 for debug */ #ifndef OBEXFTP_DEBUG #define OBEXFTP_DEBUG 0 #endif #if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L #define DEBUG(n, ...) if (OBEXFTP_DEBUG >= (n)) fprintf(stderr, __VA_ARGS__) #elif defined (__GNUC__) #define DEBUG(n, format...) if (OBEXFTP_DEBUG >= (n)) fprintf (stderr, format) #else /* !__GNUC__ */ static void DEBUG (int n, const char *format, ...) { va_list args; if (OBEXFTP_DEBUG >= (n)) { va_start (args, format); fprintf (stderr, format, args); va_end (args); } } #endif /* !__GNUC__ */ #if OBEXFTP_DEBUG > 4 #define DEBUGBUFFER(b,l) do { \ int i; \ for (i=0; i < (l); i++) \ fprintf (stderr, "%02x ", ((uint8_t *)(b))[i]); \ fprintf (stderr, "\n"); \ } while (0) #else #define DEBUGBUFFER(b,l) do { } while (0) #endif #endif /* _OBEXFTP_COMMON_H */ obexftp-0.23/config.sub0000755000076600000240000007772411146600665012036 00000000000000#! /bin/sh # Configuration validation subroutine script. # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, # 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation, # Inc. timestamp='2007-06-28' # This file is (in principle) common to ALL GNU software. # The presence of a machine in this file suggests that SOME GNU software # can handle that machine. It does not imply ALL GNU software can. # # This file is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA # 02110-1301, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Please send patches to . Submit a context # diff and a properly formatted ChangeLog entry. # # Configuration subroutine to validate and canonicalize a configuration type. # Supply the specified configuration type as an argument. # If it is invalid, we print an error message on stderr and exit with code 1. # Otherwise, we print the canonical config type on stdout and succeed. # This file is supposed to be the same for all GNU packages # and recognize all the CPU types, system types and aliases # that are meaningful with *any* GNU software. # Each package is responsible for reporting which valid configurations # it does not support. The user should be able to distinguish # a failure to support a valid configuration from a meaningless # configuration. # The goal of this file is to map all the various variations of a given # machine specification into a single specification in the form: # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM # or in some cases, the newer four-part form: # CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM # It is wrong to echo any other type of specification. me=`echo "$0" | sed -e 's,.*/,,'` usage="\ Usage: $0 [OPTION] CPU-MFR-OPSYS $0 [OPTION] ALIAS Canonicalize a configuration name. Operation modes: -h, --help print this help, then exit -t, --time-stamp print date of last modification, then exit -v, --version print version number, then exit Report bugs and patches to ." version="\ GNU config.sub ($timestamp) Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." help=" Try \`$me --help' for more information." # Parse command line while test $# -gt 0 ; do case $1 in --time-stamp | --time* | -t ) echo "$timestamp" ; exit ;; --version | -v ) echo "$version" ; exit ;; --help | --h* | -h ) echo "$usage"; exit ;; -- ) # Stop option processing shift; break ;; - ) # Use stdin as input. break ;; -* ) echo "$me: invalid option $1$help" exit 1 ;; *local*) # First pass through any local machine types. echo $1 exit ;; * ) break ;; esac done case $# in 0) echo "$me: missing argument$help" >&2 exit 1;; 1) ;; *) echo "$me: too many arguments$help" >&2 exit 1;; esac # Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). # Here we must recognize all the valid KERNEL-OS combinations. maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` case $maybe_os in nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \ uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \ storm-chaos* | os2-emx* | rtmk-nova*) os=-$maybe_os basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` ;; *) basic_machine=`echo $1 | sed 's/-[^-]*$//'` if [ $basic_machine != $1 ] then os=`echo $1 | sed 's/.*-/-/'` else os=; fi ;; esac ### Let's recognize common machines as not being operating systems so ### that things like config.sub decstation-3100 work. We also ### recognize some manufacturers as not being operating systems, so we ### can provide default operating systems below. case $os in -sun*os*) # Prevent following clause from handling this invalid input. ;; -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ -apple | -axis | -knuth | -cray) os= basic_machine=$1 ;; -sim | -cisco | -oki | -wec | -winbond) os= basic_machine=$1 ;; -scout) ;; -wrs) os=-vxworks basic_machine=$1 ;; -chorusos*) os=-chorusos basic_machine=$1 ;; -chorusrdb) os=-chorusrdb basic_machine=$1 ;; -hiux*) os=-hiuxwe2 ;; -sco6) os=-sco5v6 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco5) os=-sco3.2v5 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco4) os=-sco3.2v4 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco3.2.[4-9]*) os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco3.2v[4-9]*) # Don't forget version if it is 3.2v4 or newer. basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco5v6*) # Don't forget version if it is 3.2v4 or newer. basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco*) os=-sco3.2v2 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -udk*) basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -isc) os=-isc2.2 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -clix*) basic_machine=clipper-intergraph ;; -isc*) basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -lynx*) os=-lynxos ;; -ptx*) basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` ;; -windowsnt*) os=`echo $os | sed -e 's/windowsnt/winnt/'` ;; -psos*) os=-psos ;; -mint | -mint[0-9]*) basic_machine=m68k-atari os=-mint ;; esac # Decode aliases for certain CPU-COMPANY combinations. case $basic_machine in # Recognize the basic CPU types without company name. # Some are omitted here because they have special meanings below. 1750a | 580 \ | a29k \ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ | am33_2.0 \ | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \ | bfin \ | c4x | clipper \ | d10v | d30v | dlx | dsp16xx \ | fido | fr30 | frv \ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ | i370 | i860 | i960 | ia64 \ | ip2k | iq2000 \ | m32c | m32r | m32rle | m68000 | m68k | m88k \ | maxq | mb | microblaze | mcore | mep \ | mips | mipsbe | mipseb | mipsel | mipsle \ | mips16 \ | mips64 | mips64el \ | mips64vr | mips64vrel \ | mips64orion | mips64orionel \ | mips64vr4100 | mips64vr4100el \ | mips64vr4300 | mips64vr4300el \ | mips64vr5000 | mips64vr5000el \ | mips64vr5900 | mips64vr5900el \ | mipsisa32 | mipsisa32el \ | mipsisa32r2 | mipsisa32r2el \ | mipsisa64 | mipsisa64el \ | mipsisa64r2 | mipsisa64r2el \ | mipsisa64sb1 | mipsisa64sb1el \ | mipsisa64sr71k | mipsisa64sr71kel \ | mipstx39 | mipstx39el \ | mn10200 | mn10300 \ | mt \ | msp430 \ | nios | nios2 \ | ns16k | ns32k \ | or32 \ | pdp10 | pdp11 | pj | pjl \ | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ | pyramid \ | score \ | sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ | sh64 | sh64le \ | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ | spu | strongarm \ | tahoe | thumb | tic4x | tic80 | tron \ | v850 | v850e \ | we32k \ | x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \ | z8k) basic_machine=$basic_machine-unknown ;; m6811 | m68hc11 | m6812 | m68hc12) # Motorola 68HC11/12. basic_machine=$basic_machine-unknown os=-none ;; m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) ;; ms1) basic_machine=mt-unknown ;; # We use `pc' rather than `unknown' # because (1) that's what they normally are, and # (2) the word "unknown" tends to confuse beginning users. i*86 | x86_64) basic_machine=$basic_machine-pc ;; # Object if more than one company name word. *-*-*) echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 exit 1 ;; # Recognize the basic CPU types with company name. 580-* \ | a29k-* \ | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ | avr-* | avr32-* \ | bfin-* | bs2000-* \ | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \ | clipper-* | craynv-* | cydra-* \ | d10v-* | d30v-* | dlx-* \ | elxsi-* \ | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ | h8300-* | h8500-* \ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ | i*86-* | i860-* | i960-* | ia64-* \ | ip2k-* | iq2000-* \ | m32c-* | m32r-* | m32rle-* \ | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ | m88110-* | m88k-* | maxq-* | mcore-* \ | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ | mips16-* \ | mips64-* | mips64el-* \ | mips64vr-* | mips64vrel-* \ | mips64orion-* | mips64orionel-* \ | mips64vr4100-* | mips64vr4100el-* \ | mips64vr4300-* | mips64vr4300el-* \ | mips64vr5000-* | mips64vr5000el-* \ | mips64vr5900-* | mips64vr5900el-* \ | mipsisa32-* | mipsisa32el-* \ | mipsisa32r2-* | mipsisa32r2el-* \ | mipsisa64-* | mipsisa64el-* \ | mipsisa64r2-* | mipsisa64r2el-* \ | mipsisa64sb1-* | mipsisa64sb1el-* \ | mipsisa64sr71k-* | mipsisa64sr71kel-* \ | mipstx39-* | mipstx39el-* \ | mmix-* \ | mt-* \ | msp430-* \ | nios-* | nios2-* \ | none-* | np1-* | ns16k-* | ns32k-* \ | orion-* \ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ | pyramid-* \ | romp-* | rs6000-* \ | sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ | sparclite-* \ | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \ | tahoe-* | thumb-* \ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ | tron-* \ | v850-* | v850e-* | vax-* \ | we32k-* \ | x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \ | xstormy16-* | xtensa-* \ | ymp-* \ | z8k-*) ;; # Recognize the various machine names and aliases which stand # for a CPU type and a company and sometimes even an OS. 386bsd) basic_machine=i386-unknown os=-bsd ;; 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) basic_machine=m68000-att ;; 3b*) basic_machine=we32k-att ;; a29khif) basic_machine=a29k-amd os=-udi ;; abacus) basic_machine=abacus-unknown ;; adobe68k) basic_machine=m68010-adobe os=-scout ;; alliant | fx80) basic_machine=fx80-alliant ;; altos | altos3068) basic_machine=m68k-altos ;; am29k) basic_machine=a29k-none os=-bsd ;; amd64) basic_machine=x86_64-pc ;; amd64-*) basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` ;; amdahl) basic_machine=580-amdahl os=-sysv ;; amiga | amiga-*) basic_machine=m68k-unknown ;; amigaos | amigados) basic_machine=m68k-unknown os=-amigaos ;; amigaunix | amix) basic_machine=m68k-unknown os=-sysv4 ;; apollo68) basic_machine=m68k-apollo os=-sysv ;; apollo68bsd) basic_machine=m68k-apollo os=-bsd ;; aux) basic_machine=m68k-apple os=-aux ;; balance) basic_machine=ns32k-sequent os=-dynix ;; c90) basic_machine=c90-cray os=-unicos ;; convex-c1) basic_machine=c1-convex os=-bsd ;; convex-c2) basic_machine=c2-convex os=-bsd ;; convex-c32) basic_machine=c32-convex os=-bsd ;; convex-c34) basic_machine=c34-convex os=-bsd ;; convex-c38) basic_machine=c38-convex os=-bsd ;; cray | j90) basic_machine=j90-cray os=-unicos ;; craynv) basic_machine=craynv-cray os=-unicosmp ;; cr16) basic_machine=cr16-unknown os=-elf ;; crds | unos) basic_machine=m68k-crds ;; crisv32 | crisv32-* | etraxfs*) basic_machine=crisv32-axis ;; cris | cris-* | etrax*) basic_machine=cris-axis ;; crx) basic_machine=crx-unknown os=-elf ;; da30 | da30-*) basic_machine=m68k-da30 ;; decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) basic_machine=mips-dec ;; decsystem10* | dec10*) basic_machine=pdp10-dec os=-tops10 ;; decsystem20* | dec20*) basic_machine=pdp10-dec os=-tops20 ;; delta | 3300 | motorola-3300 | motorola-delta \ | 3300-motorola | delta-motorola) basic_machine=m68k-motorola ;; delta88) basic_machine=m88k-motorola os=-sysv3 ;; djgpp) basic_machine=i586-pc os=-msdosdjgpp ;; dpx20 | dpx20-*) basic_machine=rs6000-bull os=-bosx ;; dpx2* | dpx2*-bull) basic_machine=m68k-bull os=-sysv3 ;; ebmon29k) basic_machine=a29k-amd os=-ebmon ;; elxsi) basic_machine=elxsi-elxsi os=-bsd ;; encore | umax | mmax) basic_machine=ns32k-encore ;; es1800 | OSE68k | ose68k | ose | OSE) basic_machine=m68k-ericsson os=-ose ;; fx2800) basic_machine=i860-alliant ;; genix) basic_machine=ns32k-ns ;; gmicro) basic_machine=tron-gmicro os=-sysv ;; go32) basic_machine=i386-pc os=-go32 ;; h3050r* | hiux*) basic_machine=hppa1.1-hitachi os=-hiuxwe2 ;; h8300hms) basic_machine=h8300-hitachi os=-hms ;; h8300xray) basic_machine=h8300-hitachi os=-xray ;; h8500hms) basic_machine=h8500-hitachi os=-hms ;; harris) basic_machine=m88k-harris os=-sysv3 ;; hp300-*) basic_machine=m68k-hp ;; hp300bsd) basic_machine=m68k-hp os=-bsd ;; hp300hpux) basic_machine=m68k-hp os=-hpux ;; hp3k9[0-9][0-9] | hp9[0-9][0-9]) basic_machine=hppa1.0-hp ;; hp9k2[0-9][0-9] | hp9k31[0-9]) basic_machine=m68000-hp ;; hp9k3[2-9][0-9]) basic_machine=m68k-hp ;; hp9k6[0-9][0-9] | hp6[0-9][0-9]) basic_machine=hppa1.0-hp ;; hp9k7[0-79][0-9] | hp7[0-79][0-9]) basic_machine=hppa1.1-hp ;; hp9k78[0-9] | hp78[0-9]) # FIXME: really hppa2.0-hp basic_machine=hppa1.1-hp ;; hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) # FIXME: really hppa2.0-hp basic_machine=hppa1.1-hp ;; hp9k8[0-9][13679] | hp8[0-9][13679]) basic_machine=hppa1.1-hp ;; hp9k8[0-9][0-9] | hp8[0-9][0-9]) basic_machine=hppa1.0-hp ;; hppa-next) os=-nextstep3 ;; hppaosf) basic_machine=hppa1.1-hp os=-osf ;; hppro) basic_machine=hppa1.1-hp os=-proelf ;; i370-ibm* | ibm*) basic_machine=i370-ibm ;; # I'm not sure what "Sysv32" means. Should this be sysv3.2? i*86v32) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv32 ;; i*86v4*) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv4 ;; i*86v) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv ;; i*86sol2) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-solaris2 ;; i386mach) basic_machine=i386-mach os=-mach ;; i386-vsta | vsta) basic_machine=i386-unknown os=-vsta ;; iris | iris4d) basic_machine=mips-sgi case $os in -irix*) ;; *) os=-irix4 ;; esac ;; isi68 | isi) basic_machine=m68k-isi os=-sysv ;; m88k-omron*) basic_machine=m88k-omron ;; magnum | m3230) basic_machine=mips-mips os=-sysv ;; merlin) basic_machine=ns32k-utek os=-sysv ;; mingw32) basic_machine=i386-pc os=-mingw32 ;; mingw32ce) basic_machine=arm-unknown os=-mingw32ce ;; miniframe) basic_machine=m68000-convergent ;; *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) basic_machine=m68k-atari os=-mint ;; mips3*-*) basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` ;; mips3*) basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown ;; monitor) basic_machine=m68k-rom68k os=-coff ;; morphos) basic_machine=powerpc-unknown os=-morphos ;; msdos) basic_machine=i386-pc os=-msdos ;; ms1-*) basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'` ;; mvs) basic_machine=i370-ibm os=-mvs ;; ncr3000) basic_machine=i486-ncr os=-sysv4 ;; netbsd386) basic_machine=i386-unknown os=-netbsd ;; netwinder) basic_machine=armv4l-rebel os=-linux ;; news | news700 | news800 | news900) basic_machine=m68k-sony os=-newsos ;; news1000) basic_machine=m68030-sony os=-newsos ;; news-3600 | risc-news) basic_machine=mips-sony os=-newsos ;; necv70) basic_machine=v70-nec os=-sysv ;; next | m*-next ) basic_machine=m68k-next case $os in -nextstep* ) ;; -ns2*) os=-nextstep2 ;; *) os=-nextstep3 ;; esac ;; nh3000) basic_machine=m68k-harris os=-cxux ;; nh[45]000) basic_machine=m88k-harris os=-cxux ;; nindy960) basic_machine=i960-intel os=-nindy ;; mon960) basic_machine=i960-intel os=-mon960 ;; nonstopux) basic_machine=mips-compaq os=-nonstopux ;; np1) basic_machine=np1-gould ;; nsr-tandem) basic_machine=nsr-tandem ;; op50n-* | op60c-*) basic_machine=hppa1.1-oki os=-proelf ;; openrisc | openrisc-*) basic_machine=or32-unknown ;; os400) basic_machine=powerpc-ibm os=-os400 ;; OSE68000 | ose68000) basic_machine=m68000-ericsson os=-ose ;; os68k) basic_machine=m68k-none os=-os68k ;; pa-hitachi) basic_machine=hppa1.1-hitachi os=-hiuxwe2 ;; paragon) basic_machine=i860-intel os=-osf ;; pbd) basic_machine=sparc-tti ;; pbb) basic_machine=m68k-tti ;; pc532 | pc532-*) basic_machine=ns32k-pc532 ;; pc98) basic_machine=i386-pc ;; pc98-*) basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentium | p5 | k5 | k6 | nexgen | viac3) basic_machine=i586-pc ;; pentiumpro | p6 | 6x86 | athlon | athlon_*) basic_machine=i686-pc ;; pentiumii | pentium2 | pentiumiii | pentium3) basic_machine=i686-pc ;; pentium4) basic_machine=i786-pc ;; pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentiumpro-* | p6-* | 6x86-* | athlon-*) basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentium4-*) basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pn) basic_machine=pn-gould ;; power) basic_machine=power-ibm ;; ppc) basic_machine=powerpc-unknown ;; ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppcle | powerpclittle | ppc-le | powerpc-little) basic_machine=powerpcle-unknown ;; ppcle-* | powerpclittle-*) basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppc64) basic_machine=powerpc64-unknown ;; ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppc64le | powerpc64little | ppc64-le | powerpc64-little) basic_machine=powerpc64le-unknown ;; ppc64le-* | powerpc64little-*) basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ps2) basic_machine=i386-ibm ;; pw32) basic_machine=i586-unknown os=-pw32 ;; rdos) basic_machine=i386-pc os=-rdos ;; rom68k) basic_machine=m68k-rom68k os=-coff ;; rm[46]00) basic_machine=mips-siemens ;; rtpc | rtpc-*) basic_machine=romp-ibm ;; s390 | s390-*) basic_machine=s390-ibm ;; s390x | s390x-*) basic_machine=s390x-ibm ;; sa29200) basic_machine=a29k-amd os=-udi ;; sb1) basic_machine=mipsisa64sb1-unknown ;; sb1el) basic_machine=mipsisa64sb1el-unknown ;; sde) basic_machine=mipsisa32-sde os=-elf ;; sei) basic_machine=mips-sei os=-seiux ;; sequent) basic_machine=i386-sequent ;; sh) basic_machine=sh-hitachi os=-hms ;; sh5el) basic_machine=sh5le-unknown ;; sh64) basic_machine=sh64-unknown ;; sparclite-wrs | simso-wrs) basic_machine=sparclite-wrs os=-vxworks ;; sps7) basic_machine=m68k-bull os=-sysv2 ;; spur) basic_machine=spur-unknown ;; st2000) basic_machine=m68k-tandem ;; stratus) basic_machine=i860-stratus os=-sysv4 ;; sun2) basic_machine=m68000-sun ;; sun2os3) basic_machine=m68000-sun os=-sunos3 ;; sun2os4) basic_machine=m68000-sun os=-sunos4 ;; sun3os3) basic_machine=m68k-sun os=-sunos3 ;; sun3os4) basic_machine=m68k-sun os=-sunos4 ;; sun4os3) basic_machine=sparc-sun os=-sunos3 ;; sun4os4) basic_machine=sparc-sun os=-sunos4 ;; sun4sol2) basic_machine=sparc-sun os=-solaris2 ;; sun3 | sun3-*) basic_machine=m68k-sun ;; sun4) basic_machine=sparc-sun ;; sun386 | sun386i | roadrunner) basic_machine=i386-sun ;; sv1) basic_machine=sv1-cray os=-unicos ;; symmetry) basic_machine=i386-sequent os=-dynix ;; t3e) basic_machine=alphaev5-cray os=-unicos ;; t90) basic_machine=t90-cray os=-unicos ;; tic54x | c54x*) basic_machine=tic54x-unknown os=-coff ;; tic55x | c55x*) basic_machine=tic55x-unknown os=-coff ;; tic6x | c6x*) basic_machine=tic6x-unknown os=-coff ;; tx39) basic_machine=mipstx39-unknown ;; tx39el) basic_machine=mipstx39el-unknown ;; toad1) basic_machine=pdp10-xkl os=-tops20 ;; tower | tower-32) basic_machine=m68k-ncr ;; tpf) basic_machine=s390x-ibm os=-tpf ;; udi29k) basic_machine=a29k-amd os=-udi ;; ultra3) basic_machine=a29k-nyu os=-sym1 ;; v810 | necv810) basic_machine=v810-nec os=-none ;; vaxv) basic_machine=vax-dec os=-sysv ;; vms) basic_machine=vax-dec os=-vms ;; vpp*|vx|vx-*) basic_machine=f301-fujitsu ;; vxworks960) basic_machine=i960-wrs os=-vxworks ;; vxworks68) basic_machine=m68k-wrs os=-vxworks ;; vxworks29k) basic_machine=a29k-wrs os=-vxworks ;; w65*) basic_machine=w65-wdc os=-none ;; w89k-*) basic_machine=hppa1.1-winbond os=-proelf ;; xbox) basic_machine=i686-pc os=-mingw32 ;; xps | xps100) basic_machine=xps100-honeywell ;; ymp) basic_machine=ymp-cray os=-unicos ;; z8k-*-coff) basic_machine=z8k-unknown os=-sim ;; none) basic_machine=none-none os=-none ;; # Here we handle the default manufacturer of certain CPU types. It is in # some cases the only manufacturer, in others, it is the most popular. w89k) basic_machine=hppa1.1-winbond ;; op50n) basic_machine=hppa1.1-oki ;; op60c) basic_machine=hppa1.1-oki ;; romp) basic_machine=romp-ibm ;; mmix) basic_machine=mmix-knuth ;; rs6000) basic_machine=rs6000-ibm ;; vax) basic_machine=vax-dec ;; pdp10) # there are many clones, so DEC is not a safe bet basic_machine=pdp10-unknown ;; pdp11) basic_machine=pdp11-dec ;; we32k) basic_machine=we32k-att ;; sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele) basic_machine=sh-unknown ;; sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v) basic_machine=sparc-sun ;; cydra) basic_machine=cydra-cydrome ;; orion) basic_machine=orion-highlevel ;; orion105) basic_machine=clipper-highlevel ;; mac | mpw | mac-mpw) basic_machine=m68k-apple ;; pmac | pmac-mpw) basic_machine=powerpc-apple ;; *-unknown) # Make sure to match an already-canonicalized machine name. ;; *) echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 exit 1 ;; esac # Here we canonicalize certain aliases for manufacturers. case $basic_machine in *-digital*) basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` ;; *-commodore*) basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` ;; *) ;; esac # Decode manufacturer-specific aliases for certain operating systems. if [ x"$os" != x"" ] then case $os in # First match some system type aliases # that might get confused with valid system types. # -solaris* is a basic system type, with this one exception. -solaris1 | -solaris1.*) os=`echo $os | sed -e 's|solaris1|sunos4|'` ;; -solaris) os=-solaris2 ;; -svr4*) os=-sysv4 ;; -unixware*) os=-sysv4.2uw ;; -gnu/linux*) os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` ;; # First accept the basic system types. # The portable systems comes first. # Each alternative MUST END IN A *, to match a version number. # -sysv* is not here because it comes later, after sysvr4. -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\ | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ | -aos* \ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ | -openbsd* | -solidbsd* \ | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ | -chorusos* | -chorusrdb* \ | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \ | -uxpv* | -beos* | -mpeix* | -udk* \ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ | -skyos* | -haiku* | -rdos* | -toppers* | -drops*) # Remember, each alternative MUST END IN *, to match a version number. ;; -qnx*) case $basic_machine in x86-* | i*86-*) ;; *) os=-nto$os ;; esac ;; -nto-qnx*) ;; -nto*) os=`echo $os | sed -e 's|nto|nto-qnx|'` ;; -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \ | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) ;; -mac*) os=`echo $os | sed -e 's|mac|macos|'` ;; -linux-dietlibc) os=-linux-dietlibc ;; -linux*) os=`echo $os | sed -e 's|linux|linux-gnu|'` ;; -sunos5*) os=`echo $os | sed -e 's|sunos5|solaris2|'` ;; -sunos6*) os=`echo $os | sed -e 's|sunos6|solaris3|'` ;; -opened*) os=-openedition ;; -os400*) os=-os400 ;; -wince*) os=-wince ;; -osfrose*) os=-osfrose ;; -osf*) os=-osf ;; -utek*) os=-bsd ;; -dynix*) os=-bsd ;; -acis*) os=-aos ;; -atheos*) os=-atheos ;; -syllable*) os=-syllable ;; -386bsd) os=-bsd ;; -ctix* | -uts*) os=-sysv ;; -nova*) os=-rtmk-nova ;; -ns2 ) os=-nextstep2 ;; -nsk*) os=-nsk ;; # Preserve the version number of sinix5. -sinix5.*) os=`echo $os | sed -e 's|sinix|sysv|'` ;; -sinix*) os=-sysv4 ;; -tpf*) os=-tpf ;; -triton*) os=-sysv3 ;; -oss*) os=-sysv3 ;; -svr4) os=-sysv4 ;; -svr3) os=-sysv3 ;; -sysvr4) os=-sysv4 ;; # This must come after -sysvr4. -sysv*) ;; -ose*) os=-ose ;; -es1800*) os=-ose ;; -xenix) os=-xenix ;; -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) os=-mint ;; -aros*) os=-aros ;; -kaos*) os=-kaos ;; -zvmoe) os=-zvmoe ;; -none) ;; *) # Get rid of the `-' at the beginning of $os. os=`echo $os | sed 's/[^-]*-//'` echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 exit 1 ;; esac else # Here we handle the default operating systems that come with various machines. # The value should be what the vendor currently ships out the door with their # machine or put another way, the most popular os provided with the machine. # Note that if you're going to try to match "-MANUFACTURER" here (say, # "-sun"), then you have to tell the case statement up towards the top # that MANUFACTURER isn't an operating system. Otherwise, code above # will signal an error saying that MANUFACTURER isn't an operating # system, and we'll never get to this point. case $basic_machine in score-*) os=-elf ;; spu-*) os=-elf ;; *-acorn) os=-riscix1.2 ;; arm*-rebel) os=-linux ;; arm*-semi) os=-aout ;; c4x-* | tic4x-*) os=-coff ;; # This must come before the *-dec entry. pdp10-*) os=-tops20 ;; pdp11-*) os=-none ;; *-dec | vax-*) os=-ultrix4.2 ;; m68*-apollo) os=-domain ;; i386-sun) os=-sunos4.0.2 ;; m68000-sun) os=-sunos3 # This also exists in the configure program, but was not the # default. # os=-sunos4 ;; m68*-cisco) os=-aout ;; mep-*) os=-elf ;; mips*-cisco) os=-elf ;; mips*-*) os=-elf ;; or32-*) os=-coff ;; *-tti) # must be before sparc entry or we get the wrong os. os=-sysv3 ;; sparc-* | *-sun) os=-sunos4.1.1 ;; *-be) os=-beos ;; *-haiku) os=-haiku ;; *-ibm) os=-aix ;; *-knuth) os=-mmixware ;; *-wec) os=-proelf ;; *-winbond) os=-proelf ;; *-oki) os=-proelf ;; *-hp) os=-hpux ;; *-hitachi) os=-hiux ;; i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) os=-sysv ;; *-cbm) os=-amigaos ;; *-dg) os=-dgux ;; *-dolphin) os=-sysv3 ;; m68k-ccur) os=-rtu ;; m88k-omron*) os=-luna ;; *-next ) os=-nextstep ;; *-sequent) os=-ptx ;; *-crds) os=-unos ;; *-ns) os=-genix ;; i370-*) os=-mvs ;; *-next) os=-nextstep3 ;; *-gould) os=-sysv ;; *-highlevel) os=-bsd ;; *-encore) os=-bsd ;; *-sgi) os=-irix ;; *-siemens) os=-sysv4 ;; *-masscomp) os=-rtu ;; f30[01]-fujitsu | f700-fujitsu) os=-uxpv ;; *-rom68k) os=-coff ;; *-*bug) os=-coff ;; *-apple) os=-macos ;; *-atari*) os=-mint ;; *) os=-none ;; esac fi # Here we handle the case where we know the os, and the CPU type, but not the # manufacturer. We pick the logical manufacturer. vendor=unknown case $basic_machine in *-unknown) case $os in -riscix*) vendor=acorn ;; -sunos*) vendor=sun ;; -aix*) vendor=ibm ;; -beos*) vendor=be ;; -hpux*) vendor=hp ;; -mpeix*) vendor=hp ;; -hiux*) vendor=hitachi ;; -unos*) vendor=crds ;; -dgux*) vendor=dg ;; -luna*) vendor=omron ;; -genix*) vendor=ns ;; -mvs* | -opened*) vendor=ibm ;; -os400*) vendor=ibm ;; -ptx*) vendor=sequent ;; -tpf*) vendor=ibm ;; -vxsim* | -vxworks* | -windiss*) vendor=wrs ;; -aux*) vendor=apple ;; -hms*) vendor=hitachi ;; -mpw* | -macos*) vendor=apple ;; -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) vendor=atari ;; -vos*) vendor=stratus ;; esac basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` ;; esac echo $basic_machine$os exit # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "timestamp='" # time-stamp-format: "%:y-%02m-%02d" # time-stamp-end: "'" # End: obexftp-0.23/apps/0000777000076600000240000000000011146603263011056 500000000000000obexftp-0.23/apps/discovery.c0000644000076600000240000002237311146600644013154 00000000000000/** \file apps/discovery.c Discover mobile and detect its class (Siemens, Ericsson). ObexFTP library - language bindings for OBEX file transfer. Copyright (c) 2002 Christian W. Zuckschwerdt ObexFTP is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with ObexFTP. If not, see . */ #define _GNU_SOURCE #include #include #include #include #include #include #include #include #ifdef _WIN32 #include #define speed_t DWORD typedef HANDLE fd_t; #else #include #include typedef int fd_t; #endif #include struct mobile_param { const char *gmi; /* Manufacturer Identification to match */ const char *proto; /* Serial Protocol to use */ }; static struct mobile_param mobile_param[] = { {"siemens", "plain"}, {"ericsson", "bfb"}, {0, 0} }; struct mobile_info { char *gmi; /* AT+GMI : SIEMENS */ char *gmm; /* AT+GMM : Gipsy Soft Protocolstack */ char *gmr; /* AT+GMR : V2.550 */ char *cgmi; /* AT+CGMI : SIEMENS */ char *cgmm; /* AT+CGMM : S45 */ char *cgmr; /* AT+CGMR : 21 */ const char *ttyname; speed_t speed; }; /* S45: (auto baud) SIEMENS, Gipsy Soft Protocolstack, V2.550 SIEMENS, S45, 21 */ /* S25: (fixed at 19200) SIEMENS, Gipsy Soft Protocolstack, V2.400 SIEMENS, S25, 42 */ /* T68: Ericsson, T68, R2E006 prgCXC125326_TAE ERICSSON, 1130202-BVT68, R2E006 CXC125319 */ /* if auto-baud is enabled this will yoield the highest speed first */ #ifdef _WIN32 speed_t speeds[] = {CBR_115200, CBR_57600, CBR_38400, CBR_19200, CBR_9600, 0}; #else speed_t speeds[] = {B115200, B57600, B38400, B19200, B9600, B0}; #endif /* Send an AT-command an expect 1 line back as answer */ static int do_at_cmd(fd_t fd, const char *cmd, char *rspbuf, int rspbuflen) { #ifdef _WIN32 DWORD actual; #else fd_set ttyset; struct timeval tv; int actual; #endif char *answer; char *answer_end = NULL; int answer_size; char tmpbuf[200] = {0,}; int total = 0; int done = 0; int cmdlen; return_val_if_fail (fd > 0, -1); return_val_if_fail (cmd != NULL, -1); cmdlen = strlen(cmd); rspbuf[0] = 0; DEBUG(3, "%s() Sending %d: %s\n", __func__, cmdlen, cmd); /* Write command */ #ifdef _WIN32 if(!WriteFile(fd, cmd, cmdlen, &actual, NULL) || (actual != cmdlen)) { #else if(write(fd, cmd, cmdlen) != cmdlen) { #endif DEBUG(1, "Error writing to port\n"); return -1; } while(!done) { #ifdef _WIN32 if (!ReadFile(fd, &tmpbuf[total], sizeof(tmpbuf) - total, &actual, NULL)) { DEBUG(2, "%s() Read error: %ld\n", __func__, actual); } #else FD_ZERO(&ttyset); FD_SET(fd, &ttyset); tv.tv_sec = 2; tv.tv_usec = 0; if(select(fd+1, &ttyset, NULL, NULL, &tv)) { sleep(1); actual = read(fd, &tmpbuf[total], sizeof(tmpbuf) - total); #endif if(actual < 0) return actual; total += actual; DEBUG(3, "%s() tmpbuf=%d: %s\n", __func__, total, tmpbuf); /* Answer not found within 100 bytes. Cancel */ if(total == sizeof(tmpbuf)) return -1; if( (answer = strchr(tmpbuf, '\n')) ) { /* Remove first line (echo) */ if( (answer_end = strchr(answer+1, '\n')) ) { /* Found end of answer */ done = 1; } } #ifndef _WIN32 } else { /* Anser didn't come in time. Cancel */ return -1; } #endif } /* DEBUG(3, "%s() buf:%08lx answer:%08lx end:%08lx\n", __func__, tmpbuf, answer, answer_end); */ DEBUG(3, "%s() Answer: %s\n", __func__, answer); /* Remove heading and trailing \r */ if((*answer_end == '\r') || (*answer_end == '\n')) answer_end--; if((*answer_end == '\r') || (*answer_end == '\n')) answer_end--; if((*answer == '\r') || (*answer == '\n')) answer++; if((*answer == '\r') || (*answer == '\n')) answer++; DEBUG(3, "%s() Answer: %s\n", __func__, answer); answer_size = (answer_end) - answer +1; DEBUG(2, "%s() Answer size=%d\n", __func__, answer_size); if( (answer_size) >= rspbuflen ) return -1; strncpy(rspbuf, answer, answer_size); rspbuf[answer_size] = 0; return 0; } /* Init the phone and set it in BFB-mode */ /* Returns fd or -1 on failure */ static struct mobile_info *probe_tty(const char *ttyname) { int speed; uint8_t rspbuf[200]; struct mobile_info *info; char *p; #ifdef _WIN32 HANDLE ttyfd; DCB dcb; COMMTIMEOUTS ctTimeOuts; return_val_if_fail (ttyname != NULL, INVALID_HANDLE_VALUE); DEBUG(3, "%s() CreateFile\n", __func__); ttyfd = CreateFile (ttyname, GENERIC_READ | GENERIC_WRITE, 0, NULL, OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL, NULL); if (ttyfd == INVALID_HANDLE_VALUE) { fprintf(stderr, "Error: CreateFile()\n"); return NULL; } if(!GetCommState(ttyfd, &dcb)) fprintf(stderr, "Error: GetCommState()\n"); dcb.fBinary = TRUE; dcb.BaudRate = CBR_57600; dcb.fParity = FALSE; dcb.Parity = 0; dcb.ByteSize = 8; dcb.StopBits = 1; dcb.fInX = FALSE; dcb.fOutX = FALSE; dcb.fOutxDsrFlow = FALSE; dcb.fOutxCtsFlow = FALSE; dcb.fDtrControl = DTR_CONTROL_ENABLE; dcb.fRtsControl = RTS_CONTROL_ENABLE; if(!SetCommState(ttyfd, &dcb)) fprintf(stderr, "Error: SetCommState()\n"); ctTimeOuts.ReadIntervalTimeout = 250; ctTimeOuts.ReadTotalTimeoutMultiplier = 1; /* no good with big buffer */ ctTimeOuts.ReadTotalTimeoutConstant = 500; ctTimeOuts.WriteTotalTimeoutMultiplier = 1; ctTimeOuts.WriteTotalTimeoutConstant = 5000; if(!SetCommTimeouts(ttyfd, &ctTimeOuts)) fprintf(stderr, "Error: SetCommTimeouts()\n"); Sleep(500); /* flush all pending input */ if(!PurgeComm(ttyfd, PURGE_RXABORT | PURGE_RXCLEAR)) fprintf(stderr, "Error: PurgeComm()\n"); #else /* _WIN32 */ int ttyfd; struct termios oldtio, newtio; return_val_if_fail (ttyname != NULL, NULL); DEBUG(3, "%s() \n", __func__); info = calloc(1, sizeof(struct mobile_info)); info->ttyname = ttyname; if( (ttyfd = open(ttyname, O_RDWR | O_NONBLOCK | O_NOCTTY, 0)) < 0 ) { fprintf(stderr, "Error: Can't open tty\n"); free(info); return NULL; } /* probe mobile */ tcgetattr(ttyfd, &oldtio); for (speed = 0; speeds[speed] != B0; speed++) { memset(&newtio, 0, sizeof(newtio)); newtio.c_cflag = speeds[speed] | CS8 | CREAD; newtio.c_iflag = IGNPAR; newtio.c_oflag = 0; tcflush(ttyfd, TCIFLUSH); tcsetattr(ttyfd, TCSANOW, &newtio); /* is this ok? do we need to send both cr and lf? */ if(do_at_cmd(ttyfd, "AT\r", rspbuf, sizeof(rspbuf)) < 0) { DEBUG(1, "Comm-error doing AT\n"); } else if(strcasecmp("OK", rspbuf) == 0) { DEBUG(2, "OKAY doing AT (%s)\n", rspbuf); break; } } if(speeds[speed] == B0) { close(ttyfd); free(info); DEBUG(1, "Nothing found\n"); return NULL; } info->speed = speeds[speed]; /* detect mobile */ if(do_at_cmd(ttyfd, "AT+GMI\r", rspbuf, sizeof(rspbuf)) < 0) { close(ttyfd); free(info); DEBUG(1, "Comm-error doing AT+GMI\n"); return NULL; } if ((p=strchr(rspbuf, '\r')) != NULL) *p = 0; if ((p=strchr(rspbuf, '\n')) != NULL) *p = 0; info->gmi = strdup(rspbuf); if(do_at_cmd(ttyfd, "AT+GMM\r", rspbuf, sizeof(rspbuf)) < 0) { close(ttyfd); free(info); DEBUG(1, "Comm-error doing AT+GMM\n"); return NULL; } if ((p=strchr(rspbuf, '\r')) != NULL) *p = 0; if ((p=strchr(rspbuf, '\n')) != NULL) *p = 0; info->gmm = strdup(rspbuf); if(do_at_cmd(ttyfd, "AT+GMR\r", rspbuf, sizeof(rspbuf)) < 0) { close(ttyfd); free(info); DEBUG(1, "Comm-error doing AT+GMR\n"); return NULL; } if ((p=strchr(rspbuf, '\r')) != NULL) *p = 0; if ((p=strchr(rspbuf, '\n')) != NULL) *p = 0; info->gmr= strdup(rspbuf); if(do_at_cmd(ttyfd, "AT+CGMI\r", rspbuf, sizeof(rspbuf)) < 0) { close(ttyfd); free(info); DEBUG(1, "Comm-error doing AT+CGMI\n"); return NULL; } if ((p=strchr(rspbuf, '\r')) != NULL) *p = 0; if ((p=strchr(rspbuf, '\n')) != NULL) *p = 0; info->cgmi = strdup(rspbuf); if(do_at_cmd(ttyfd, "AT+CGMM\r", rspbuf, sizeof(rspbuf)) < 0) { close(ttyfd); free(info); DEBUG(1, "Comm-error doing AT+CGMM\n"); return NULL; } if ((p=strchr(rspbuf, '\r')) != NULL) *p = 0; if ((p=strchr(rspbuf, '\n')) != NULL) *p = 0; info->cgmm = strdup(rspbuf); if(do_at_cmd(ttyfd, "AT+CGMR\r", rspbuf, sizeof(rspbuf)) < 0) { close(ttyfd); free(info); DEBUG(1, "Comm-error doing AT+CGMR\n"); return NULL; } if ((p=strchr(rspbuf, '\r')) != NULL) *p = 0; if ((p=strchr(rspbuf, '\n')) != NULL) *p = 0; info->cgmr= strdup(rspbuf); close(ttyfd); #endif return info; } int main(int argc, char *argv[]) { struct mobile_info *info; if (mobile_param != NULL) { }; if (argc > 1) info = probe_tty(argv[1]); else #ifdef _WIN32 info = probe_tty("COM1"); #else info = probe_tty("/dev/ttyS0"); #endif if (info != NULL) { printf("%s (%d):\n%s, %s, %s\n%s, %s, %s\n", info->ttyname, info->speed, info->gmi, info->gmm, info->gmr, info->cgmi, info->cgmm, info->cgmr); return (EXIT_SUCCESS); } return (EXIT_FAILURE); } obexftp-0.23/apps/obexftp.c0000644000076600000240000005270511146600644012616 00000000000000/** \file apps/obexftp.c Command line client to transfer from/to Mobile Equipment via OBEX. ObexFTP library - language bindings for OBEX file transfer. Copyright (c) 2002-2007 Christian W. Zuckschwerdt ObexFTP is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with ObexFTP. If not, see . */ #define _GNU_SOURCE #include #include #include #include #include #include #include #ifdef HAVE_SYS_TIMES_H #include #endif #include #include #include #ifdef _WIN32 #define strcasestr strstr #define ETIMEDOUT WSAETIMEDOUT #define ECONNREFUSED WSAECONNREFUSED #define EHOSTDOWN WSAEHOSTDOWN #define EINPROGRESS WSAEINPROGRESS #endif /* _WIN32 */ #include // perhaps this scheme would be better? // IRDA irda://[nick?] // CABLE tty://path // BLUETOOTH bt://[device[:channel]] // USB usb://[enum] // INET host://host[:port] #define OBEXFTP_CABLE "OBEXFTP_CABLE" #define OBEXFTP_BLUETOOTH "OBEXFTP_BLUETOOTH" #define OBEXFTP_USB "OBEXFTP_USB" #define OBEXFTP_INET "OBEXFTP_INET" #define OBEXFTP_CHANNEL "OBEXFTP_CHANNEL" /* current command, set by main, read from info_cb */ int c; static void info_cb(int event, const char *msg, int len, void *UNUSED(data)) { char progress[] = "\\|/-"; static unsigned int i = 0; switch (event) { case OBEXFTP_EV_ERRMSG: fprintf(stderr, "Error: %s\n", msg); break; case OBEXFTP_EV_ERR: // OBEX_EV_REQDONE: obex_rsp=43 (SE user reject) fprintf(stderr, "failed: %s\n", msg); break; case OBEXFTP_EV_OK: fprintf(stderr, "done\n"); break; case OBEXFTP_EV_CONNECTING: fprintf(stderr, "Connecting..."); break; case OBEXFTP_EV_DISCONNECTING: fprintf(stderr, "Disconnecting..."); break; case OBEXFTP_EV_SENDING: fprintf(stderr, "Sending \"%s\"... ", msg); break; case OBEXFTP_EV_RECEIVING: fprintf(stderr, "Receiving \"%s\"... ", msg); break; case OBEXFTP_EV_LISTENING: fprintf(stderr, "Waiting for incoming connection\n"); break; case OBEXFTP_EV_CONNECTIND: fprintf(stderr, "Incoming connection\n"); break; case OBEXFTP_EV_DISCONNECTIND: fprintf(stderr, "Disconnecting\n"); break; case OBEXFTP_EV_INFO: printf("Got info %u: \n", *(uint32_t*)msg); break; case OBEXFTP_EV_BODY: if (c == 'l' || c == 'X' || c == 'P') { if (msg == NULL) fprintf(stderr, "No body.\n"); else if (len == 0) fprintf(stderr, "Empty body.\n"); else write(STDOUT_FILENO, msg, len); } break; case OBEXFTP_EV_PROGRESS: fprintf(stderr, "%c%c", 0x08, progress[i++]); fflush(stdout); if (i >= strlen(progress)) i = 0; break; } } /* create global uuid buffers */ static const char *fbs_uuid = (const char *)UUID_FBS; static const char *irmc_uuid = (const char *)UUID_IRMC; static const char *s45_uuid = (const char *)UUID_S45; static const char *pcsoftware_uuid = (const char *)UUID_PCSOFTWARE; /* parse UUID string to real bytes */ static int parse_uuid(char *name, const char **uuid, int *uuid_len) { if (name == NULL || *name == '\0' || !strncasecmp(name, "none", 4) || !strncasecmp(name, "null", 4) || !strncasecmp(name, "push", 4) || !strncasecmp(name, "goep", 4)) { fprintf(stderr, "Suppressing FBS.\n"); if (uuid) *uuid = NULL; if (uuid_len) *uuid_len = 0; return 0; } if (!strncasecmp(name, "fbs", 3) || !strncasecmp(name, "ftp", 3)) { fprintf(stderr, "Using FBS uuid.\n"); if (uuid) *uuid = fbs_uuid; if (uuid_len) *uuid_len = sizeof(UUID_FBS); return sizeof(UUID_FBS); } if (!strncasecmp(name, "sync", 4) || !strncasecmp(name, "irmc", 4)) { fprintf(stderr, "Using SYNCH uuid.\n"); if (uuid) *uuid = irmc_uuid; if (uuid_len) *uuid_len = sizeof(UUID_IRMC); return sizeof(UUID_IRMC); } if (!strncasecmp(name, "s45", 3) || !strncasecmp(name, "sie", 3)) { fprintf(stderr, "Using S45 uuid.\n"); if (uuid) *uuid = s45_uuid; if (uuid_len) *uuid_len = sizeof(UUID_S45); return sizeof(UUID_S45); } if (!strncasecmp(name, "pcsoftware", 10) || !strncasecmp(name, "sharp", 5)) { fprintf(stderr, "Using PCSOFTWARE uuid.\n"); if (uuid) *uuid = pcsoftware_uuid; if (uuid_len) *uuid_len = sizeof(UUID_PCSOFTWARE); return sizeof(UUID_PCSOFTWARE); } return -1; } static void discover_usb() { char **devices; char **dev; int interfaces_number; devices = obexftp_discover(OBEX_TRANS_USB); interfaces_number = 0; for(dev = devices; *dev; dev++) interfaces_number++; printf("Found %d USB OBEX interfaces\n\n", interfaces_number); for(dev = devices; *dev; dev++) { fprintf(stderr, "%s\n", *dev); } printf("\nUse '-u interface_number' to connect\n"); } static int find_bt(char *addr, char **res_bdaddr, int *res_channel) { char **devices; char **dev; *res_bdaddr = addr; if (!addr || strlen(addr) < (6*2+5) || addr[2]!=':') { fprintf(stderr, "Scanning for %s ...\n", addr); devices = obexftp_discover(OBEX_TRANS_BLUETOOTH); for(dev = devices; dev && *dev; dev++) { if (!addr || strcasestr(*dev, addr)) { fprintf(stderr, "Found: %s\n", *dev); *res_bdaddr = *dev; break; } fprintf(stderr, "Seen: %s\n", *dev); } } if (!*res_bdaddr) return -1; /* No (matching) BT device found */ // (*res_bdaddr)[17] = '\0'; if (*res_channel < 0) { fprintf(stderr, "Browsing %s ...\n", *res_bdaddr); *res_channel = obexftp_browse_bt_ftp(*res_bdaddr); } if (*res_channel < 0) return -1; /* No valid BT channel found */ return 0; } /*@only@*/ /*@null@*/ static obexftp_client_t *cli = NULL; static const char *src_dev = NULL; #ifdef HAVE_BLUETOOTH static int transport = OBEX_TRANS_BLUETOOTH; #else static int transport = OBEX_TRANS_IRDA; #endif /* HAVE_BLUETOOTH */ /*@only@*/ /*@null@*/ static char *device = NULL; static int channel = -1; static const char *use_uuid = (const char *)UUID_FBS; static int use_uuid_len = sizeof(UUID_FBS); static int use_conn=1; static int use_path=1; /* connect with given uuid. re-connect every time */ static int cli_connect_uuid(const char *uuid, int uuid_len) { int ret, retry; #ifdef HAVE_SYS_TIMES_H clock_t clock; #endif if (cli == NULL) { /* Open */ cli = obexftp_open (transport, NULL, info_cb, NULL); if(cli == NULL) { fprintf(stderr, "Error opening obexftp-client\n"); exit(1); //return -1; } if (!use_conn) { cli->quirks &= ~OBEXFTP_CONN_HEADER; } if (!use_path) { cli->quirks &= ~OBEXFTP_SPLIT_SETPATH; } } for (retry = 0; retry < 3; retry++) { /* Connect */ #ifdef HAVE_SYS_TIMES_H clock = times(NULL); #endif ret = obexftp_connect_src(cli, src_dev, device, channel, uuid, uuid_len); #ifdef HAVE_SYS_TIMES_H clock = times(NULL)-clock; fprintf(stderr, "Tried to connect for %ldms\n", clock); #endif if (ret >= 0) return ret; switch (errno) { case ETIMEDOUT: perror("The device may have moved out of range"); break; /* retry */ case ECONNREFUSED: perror("The user may have rejected the transfer"); return -errno; case EHOSTDOWN: perror("The device may be out of range or turned off"); break; /* retry */ case EINPROGRESS: perror("Interupted/bad reception or the device moved out of range"); break; /* retry */ default: perror("error on connect()"); break; } fprintf(stderr, "Still trying to connect\n"); } obexftp_close(cli); cli = NULL; return ret; } /* connect, possibly without fbs uuid. won't re-connect */ static int cli_connect() { if (cli != NULL) { return 0; } /* complete bt address if necessary */ if (transport == OBEX_TRANS_BLUETOOTH) { find_bt(device, &device, &channel); // we should free() the find_bt result at some point } if (cli_connect_uuid(use_uuid, use_uuid_len) < 0) exit(1); return 0; } static void cli_disconnect() { if (cli != NULL) { /* Disconnect */ (void) obexftp_disconnect (cli); /* Close */ obexftp_close (cli); cli = NULL; } } static void probe_device_uuid(const char *uuid, int uuid_len) { int rsp[10]; if (cli_connect_uuid(uuid, uuid_len) < 0) { printf("couldn't connect.\n"); return; } printf("getting null object without type\n"); (void) obexftp_get_type(cli, NULL, NULL, NULL); rsp[0] = cli->obex_rsp; printf("response code %02x\n", cli->obex_rsp); printf("getting empty object without type\n"); (void) obexftp_get_type(cli, NULL, NULL, ""); rsp[1] = cli->obex_rsp; printf("response code %02x\n", cli->obex_rsp); printf("getting null object with x-obex/folder-listing type\n"); (void) obexftp_get_type(cli, XOBEX_LISTING, NULL, NULL); rsp[2] = cli->obex_rsp; printf("response code %02x\n", cli->obex_rsp); printf("getting empty object with x-obex/folder-listing type\n"); (void) obexftp_get_type(cli, XOBEX_LISTING, NULL, ""); rsp[3] = cli->obex_rsp; printf("response code %02x\n", cli->obex_rsp); printf("getting null object with x-obex/capability type\n"); (void) obexftp_get_type(cli, XOBEX_CAPABILITY, NULL, NULL); rsp[4] = cli->obex_rsp; printf("response code %02x\n", cli->obex_rsp); printf("getting empty object with x-obex/capability type\n"); (void) obexftp_get_type(cli, XOBEX_CAPABILITY, NULL, ""); rsp[5] = cli->obex_rsp; printf("response code %02x\n", cli->obex_rsp); printf("getting null object with x-obex/object-profile type\n"); (void) obexftp_get_type(cli, XOBEX_PROFILE, NULL, NULL); rsp[6] = cli->obex_rsp; printf("response code %02x\n", cli->obex_rsp); printf("getting empty object with x-obex/object-profile type\n"); (void) obexftp_get_type(cli, XOBEX_PROFILE, NULL, ""); rsp[7] = cli->obex_rsp; printf("response code %02x\n", cli->obex_rsp); printf("getting telecom/devinfo.txt object\n"); cli->quirks = 0; (void) obexftp_get_type(cli, NULL, NULL, "telecom/devinfo.txt"); rsp[8] = cli->obex_rsp; printf("response code %02x\n", cli->obex_rsp); printf("getting telecom/devinfo.txt object with setpath\n"); cli->quirks = (OBEXFTP_LEADING_SLASH | OBEXFTP_TRAILING_SLASH | OBEXFTP_SPLIT_SETPATH); (void) obexftp_get_type(cli, NULL, NULL, "telecom/devinfo.txt"); rsp[9] = cli->obex_rsp; printf("response code %02x\n", cli->obex_rsp); printf("=== response codes === %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x\n", rsp[0], rsp[1], rsp[2], rsp[3], rsp[4], rsp[5], rsp[6], rsp[7], rsp[8], rsp[9]); //cli_disconnect(); if (cli != NULL) { (void) obexftp_disconnect (cli); } } /* try the whole probing with different uuids */ static void probe_device() { printf("\n=== Probing with FBS uuid.\n"); probe_device_uuid(UUID_FBS, sizeof(UUID_FBS)); printf("\n=== Probing with S45 uuid.\n"); probe_device_uuid(UUID_S45, sizeof(UUID_S45)); printf("\n=== Probing without uuid.\n"); probe_device_uuid(NULL, 0); printf("\nEnd of probe.\n"); exit (0); } int main(int argc, char *argv[]) { int verbose = 0; int most_recent_cmd = 0; char *output_file = NULL; char *move_src = NULL; int ret = 0; /* preset mode of operation depending on our name */ if (strstr(argv[0], "ls") != NULL) most_recent_cmd = 'l'; if (strstr(argv[0], "get") != NULL) most_recent_cmd = 'g'; if (strstr(argv[0], "put") != NULL) most_recent_cmd = 'p'; if (strstr(argv[0], "rm") != NULL) most_recent_cmd = 'k'; /* preset the port from environment */ if (getenv(OBEXFTP_CHANNEL) != NULL) { channel = atoi(getenv(OBEXFTP_CHANNEL)); } if (channel >= 0) { transport = OBEX_TRANS_USB; fprintf(stderr, "Presetting to USB: %d\n", channel); } if (getenv(OBEXFTP_CABLE) != NULL) { device = getenv(OBEXFTP_CABLE); transport = OBEX_TRANS_CUSTOM; fprintf(stderr, "Presetting to TTY: %s\n", device); } if (getenv(OBEXFTP_BLUETOOTH) != NULL) { device = getenv(OBEXFTP_BLUETOOTH); transport = OBEX_TRANS_BLUETOOTH; fprintf(stderr, "Presetting to BT: %s (%d)\n", device, channel); } if (getenv(OBEXFTP_INET) != NULL) { device = getenv(OBEXFTP_INET); transport = OBEX_TRANS_INET; fprintf(stderr, "Presetting to INET: %s\n", device); } while (1) { int option_index = 0; static struct option long_options[] = { {"irda", no_argument, NULL, 'i'}, #ifdef HAVE_BLUETOOTH {"bluetooth", optional_argument, NULL, 'b'}, {"channel", required_argument, NULL, 'B'}, {"hci", required_argument, NULL, 'd'}, #endif #ifdef HAVE_USB {"usb", optional_argument, NULL, 'u'}, #endif {"tty", required_argument, NULL, 't'}, {"network", required_argument, NULL, 'n'}, {"uuid", optional_argument, NULL, 'U'}, {"noconn", no_argument, NULL, 'H'}, {"nopath", no_argument, NULL, 'S'}, {"list", optional_argument, NULL, 'l'}, {"chdir", required_argument, NULL, 'c'}, {"mkdir", required_argument, NULL, 'C'}, {"output", required_argument, NULL, 'o'}, {"get", required_argument, NULL, 'g'}, {"getdelete", required_argument, NULL, 'G'}, {"put", required_argument, NULL, 'p'}, {"delete", required_argument, NULL, 'k'}, {"capability", no_argument, NULL, 'X'}, {"probe", no_argument, NULL, 'Y'}, {"info", no_argument, NULL, 'x'}, {"move", required_argument, NULL, 'm'}, {"verbose", no_argument, NULL, 'v'}, {"version", no_argument, NULL, 'V'}, {"help", no_argument, NULL, 'h'}, {"usage", no_argument, NULL, 'h'}, {0, 0, 0, 0} }; c = getopt_long (argc, argv, "-ib::B:d:u::t:n:U::HSL::l::c:C:f:o:g:G:p:k:XYxm:VvhN:FP", long_options, &option_index); if (c == -1) break; if (c == 1) c = most_recent_cmd; switch (c) { case 'i': transport = OBEX_TRANS_IRDA; device = NULL; channel = 0; break; #ifdef HAVE_BLUETOOTH case 'b': transport = OBEX_TRANS_BLUETOOTH; /* handle severed optional option argument */ if (!optarg && argc > optind && argv[optind][0] != '-') { optarg = argv[optind]; optind++; } device = optarg; break; case 'B': channel = atoi(optarg); break; case 'd': src_dev = optarg; break; #endif /* HAVE_BLUETOOTH */ #ifdef HAVE_USB case 'u': #ifndef _WIN32 if (geteuid() != 0) fprintf(stderr, "If USB doesn't work setup permissions in udev or run as superuser.\n"); #endif transport = OBEX_TRANS_USB; device = NULL; /* handle severed optional option argument */ if (!optarg && argc > optind && argv[optind][0] != '-') { optarg = argv[optind]; optind++; channel = atoi(optarg); } else { discover_usb(); } break; #endif /* HAVE_USB */ case 't': transport = OBEX_TRANS_CUSTOM; device = optarg; channel = 0; if (strstr(optarg, "ir") != NULL) fprintf(stderr, "Do you really want to use IrDA via ttys?\n"); break; case 'N': fprintf(stderr,"Option -%c is deprecated, use -%c instead\n",'N','n'); case 'n': transport = OBEX_TRANS_INET; device = optarg; channel = 0; { int n; if (sscanf(optarg, "%d.%d.%d.%d", &n, &n, &n, &n) != 4) fprintf(stderr, "Please use dotted quad notation.\n"); } break; case 'F': fprintf(stderr,"Option -%c is deprecated, use -%c instead\n",'F','U'); optarg = "none"; case 'U': /* handle severed optional option argument */ if (!optarg && argc > optind && argv[optind][0] != '-') { optarg = argv[optind]; optind++; } if (parse_uuid(optarg, &use_uuid, &use_uuid_len) < 0) fprintf(stderr, "Unknown UUID %s\n", optarg); break; case 'H': use_conn=0; break; case 'S': use_path=0; break; case 'L': /* handle severed optional option argument */ if (!optarg && argc > optind && argv[optind][0] != '-') { optarg = argv[optind]; optind++; } if (cli_connect() >= 0) { /* List folder */ stat_entry_t *ent; void *dir = obexftp_opendir(cli, optarg); while ((ent = obexftp_readdir(dir)) != NULL) { stat_entry_t *st; st = obexftp_stat(cli, ent->name); if (!st) continue; printf("%d %s%s\n", st->size, ent->name, ent->mode&S_IFDIR?"/":""); } obexftp_closedir(dir); } most_recent_cmd = c; break; case 'l': /* handle severed optional option argument */ if (!optarg && argc > optind && argv[optind][0] != '-') { optarg = argv[optind]; optind++; } if (cli_connect() >= 0) { /* List folder */ ret = obexftp_list(cli, NULL, optarg); } most_recent_cmd = c; break; case 'c': if (cli_connect() >= 0) { /* Change dir */ ret = obexftp_setpath(cli, optarg, 0); } most_recent_cmd = c; break; case 'C': if (cli_connect() >= 0) { /* Change or Make dir */ ret = obexftp_setpath(cli, optarg, 1); } most_recent_cmd = c; break; case 'o': output_file = optarg; break; case 'g': case 'G': if (cli_connect() >= 0) { char *p; /* basename or output_file */ if ((p = strrchr(optarg, '/')) != NULL) p++; else p = optarg; if (output_file) p = output_file; /* Get file */ if (obexftp_get(cli, p, optarg) && c == 'G') ret = obexftp_del(cli, optarg); output_file = NULL; } most_recent_cmd = c; break; case 'p': if (cli_connect() >= 0) { char *p; /* basename or output_file */ if ((p = strrchr(optarg, '/')) != NULL) p++; else p = optarg; if (output_file) p = output_file; /* Send file */ ret = obexftp_put_file(cli, optarg, p); output_file = NULL; } most_recent_cmd = c; break; case 'k': if (cli_connect() >= 0) { /* Delete file */ ret = obexftp_del(cli, optarg); } most_recent_cmd = c; break; case 'X': if (cli_connect() >= 0) { /* Get capabilities */ ret = obexftp_get_capability(cli, optarg, 0); } most_recent_cmd = 'h'; // not really break; case 'P': fprintf(stderr,"Option -%c is deprecated, use -%c instead\n",'P','Y'); case 'Y': if (cli == NULL) probe_device(); fprintf(stderr, "No other transfer options allowed with --probe\n"); break; case 'x': if (cli_connect() >= 0) { /* for S65 */ (void) obexftp_disconnect (cli); (void) obexftp_connect_uuid (cli, device, channel, UUID_S45, sizeof(UUID_S45)); /* Retrieve Infos */ (void) obexftp_info(cli, 0x01); (void) obexftp_info(cli, 0x02); } most_recent_cmd = 'h'; // not really break; case 'm': most_recent_cmd = c; if (move_src == NULL) { move_src = optarg; break; } if (cli_connect() >= 0) { /* Rename a file */ ret = obexftp_rename(cli, move_src, optarg); } move_src = NULL; break; case 'v': verbose++; break; case 'V': printf("ObexFTP %s\n", VERSION); most_recent_cmd = 'h'; // not really break; case 'h': printf("ObexFTP %s\n", VERSION); printf("Usage: %s [ -i | -b [-B ] | -U | -t | -N ]\n" "[-c ...] [-C ] [-l []]\n" "[-g ...] [-p ...] [-k ...] [-x] [-m ...]\n" "Transfer files from/to Mobile Equipment.\n" "Copyright (c) 2002-2004 Christian W. Zuckschwerdt\n" "\n" " -i, --irda connect using IrDA transport (default)\n" #ifdef HAVE_BLUETOOTH " -b, --bluetooth [] use or search a bluetooth device\n" " [ -B, --channel ] use this bluetooth channel when connecting\n" " [ -d, --hci ] use source device with this address or number\n" #endif #ifdef HAVE_USB " -u, --usb [] connect to a usb interface or list interfaces\n" #endif " -t, --tty connect to this tty using a custom transport\n" " -n, --network connect to this host\n\n" " -U, --uuid use given uuid (none, FBS, IRMC, S45, SHARP)\n" " -H, --noconn suppress connection ids (no conn header)\n" " -S, --nopath dont use setpaths (use path as filename)\n\n" " -c, --chdir chdir\n" " -C, --mkdir mkdir and chdir\n" " -l, --list [] list current/given folder\n" " -o, --output specify the target file name\n" " get and put always specify the remote name.\n" " -g, --get fetch files\n" " -G, --getdelete fetch and delete (move) files \n" " -p, --put send files\n" " -k, --delete delete files\n\n" " -X, --capability retrieve capability object\n" " -Y, --probe probe and report device characteristics\n" " -x, --info retrieve infos (Siemens)\n" " -m, --move move files (Siemens)\n\n" " -v, --verbose verbose messages\n" " -V, --version print version info\n" " -h, --help, --usage this help text\n" "\n", argv[0]); most_recent_cmd = 'h'; // not really break; default: printf("Try `%s --help' for more information.\n", argv[0]); } if (ret < 0) printf("The operation failed with return code %d\n", -ret); } if (most_recent_cmd == 0) fprintf(stderr, "Nothing to do. Use --help for help.\n"); if (optind < argc) { fprintf(stderr, "non-option ARGV-elements: "); while (optind < argc) fprintf(stderr, "%s ", argv[optind++]); fprintf(stderr, "\n"); } cli_disconnect (); exit (-ret); } obexftp-0.23/apps/obexftpd.c0000644000076600000240000006062211146600644012757 00000000000000/** \file apps/obexftpd.c OBEX file server. ObexFTP library - language bindings for OBEX file transfer. Copyright (c) 2003-2006 Christian W. Zuckschwerdt Alan Zhang Hendrik Sattler Frode Isaksen ObexFTP is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with ObexFTP. If not, see . */ #ifdef HAVE_CONFIG_H #include #endif #define _GNU_SOURCE #include #include #include #include #include #include #include #include #include #include #include #ifdef _WIN32 #include #define S_IRGRP 0 #define S_IROTH 0 #define S_IWGRP 0 #define S_IWOTH 0 #define S_IXGRP 0 #define S_IXOTH 0 #define sleep(n) Sleep((n) * 1000) #define mkdir(dir,mode) _mkdir(dir) #define lstat stat #else #include #include #include #include #endif /* just until there is a server layer in obexftp */ #include #include #include #include /* define this to "", "\r\n" or "\n" */ #define EOLCHARS "\n" /* Application defined headers */ #define HDR_CREATOR 0xcf /* so we don't require OpenOBEX 1.3 */ #define WORK_PATH_MAX 128 #define CUR_DIR "./" static char *device = NULL; static int channel = 10; /* OBEX_PUSH_HANDLE */ static char init_work_path[WORK_PATH_MAX]; volatile int finished = 0; volatile int success = 0; volatile int obexftpd_reset = 0; uint32_t connection_id = 0; int verbose = 0; // this whole thing needs a review: static int parsehostport(const char *name, char **host, int *port) { struct hostent *e; char *p, *s; uint8_t n[4]; p = strdup(name); *port = 650; if ((s=strchr(p, ':'))) { *s = '\0'; *port = atoi(++s); } *host = "0.0.0.0"; if (sscanf(p, "%hhu.%hhu.%hhu.%hhu", &n[0], &n[1], &n[2], &n[3]) == 4) { *host = strdup(p); } else { e = gethostbyname(p); if (e) { *host = e->h_addr_list[0]; // inet_ntoa needed! } } free(p); return 0; } //BEGIN of compositor the folder listing XML document struct rawdata_stream { char *data; unsigned int block_size; unsigned int size; unsigned int max_size; }; static struct rawdata_stream* INIT_RAWDATA_STREAM(unsigned int size) { struct rawdata_stream *stream = malloc(sizeof(*stream)); if (NULL == stream) { return NULL; } stream->data = malloc(size); if (NULL == stream->data) { free(stream); return NULL; } memset(stream->data,0,size); stream->size = 0; stream->block_size = size; stream->max_size = size; return stream; } static int ADD_RAWDATA_STREAM_DATA(struct rawdata_stream *stream, const char *data) { char *databuf; unsigned int size; if (data == NULL) return 0; size = strlen(data); if (size == 0) return 0; if ((size + stream->size) >= stream->max_size) { while((size + stream->size) >= stream->max_size) { stream->max_size += stream->block_size; } databuf = realloc(stream->data, stream->max_size); if (NULL == databuf) { fprintf(stderr, "realloc() failed\n"); return -1; } stream->data = databuf; } strcat(stream->data, data); stream->size += size; return size; } static void FREE_RAWDATA_STREAM(struct rawdata_stream *stream) { free(stream->data); free(stream); } #define FL_XML_VERSION(stream) \ ADD_RAWDATA_STREAM_DATA(stream, "" EOLCHARS); #define FL_XML_TYPE(stream) \ ADD_RAWDATA_STREAM_DATA(stream, "" EOLCHARS); #define FL_XML_BODY_BEGIN(stream) \ ADD_RAWDATA_STREAM_DATA(stream, "" EOLCHARS); #define FL_XML_BODY_END(stream) \ ADD_RAWDATA_STREAM_DATA(stream, "" EOLCHARS); #define FL_XML_BODY_ITEM_BEGIN(stream) \ ADD_RAWDATA_STREAM_DATA(stream, "<"); #define FL_XML_BODY_ITEM_END(stream) \ ADD_RAWDATA_STREAM_DATA(stream, "/>" EOLCHARS); inline static void FL_XML_BODY_FOLDERNAME(struct rawdata_stream *stream, char *name) { ADD_RAWDATA_STREAM_DATA(stream, "folder name=\""); ADD_RAWDATA_STREAM_DATA(stream, name); ADD_RAWDATA_STREAM_DATA(stream, "\" "); } inline static void FL_XML_BODY_FILENAME(struct rawdata_stream *stream, char *name) { ADD_RAWDATA_STREAM_DATA(stream, "file name=\""); ADD_RAWDATA_STREAM_DATA(stream, name); ADD_RAWDATA_STREAM_DATA(stream, "\" "); } inline static void FL_XML_BODY_SIZE(struct rawdata_stream *stream, unsigned int size) { const char format[] = "size=\"%d\" "; char str_size[sizeof(format)+14]; snprintf(str_size,sizeof(str_size), format, size); ADD_RAWDATA_STREAM_DATA(stream, str_size); } inline static void FL_XML_BODY_PERM(struct rawdata_stream *stream, mode_t file, mode_t dir) { const char format[] = "user-perm=\"%s%s%s\" "; char str_perm[sizeof(format)]; snprintf(str_perm,sizeof(str_perm),format, (file & (S_IRUSR|S_IRGRP|S_IROTH)? "R": ""), (file & (S_IWUSR|S_IWGRP|S_IWOTH)? "W": ""), (dir & (S_IWUSR|S_IWGRP|S_IWOTH)? "D": "")); ADD_RAWDATA_STREAM_DATA(stream,str_perm); } inline static void FL_XML_BODY_TIME(struct rawdata_stream *stream, const char* type, time_t time) { struct tm* tm = gmtime(&time); char str_tm[sizeof("=\"yyyymmddThhmmssZ\" ")]; if (tm == NULL || stream == NULL || strftime(str_tm,sizeof(str_tm),"=\"%Y%m%dT%H%M%SZ\" ",tm) == 0) return; ADD_RAWDATA_STREAM_DATA(stream, type); ADD_RAWDATA_STREAM_DATA(stream, str_tm); } #define FL_XML_BODY_MTIME(stream,time) \ FL_XML_BODY_TIME(stream,"modified",time) #define FL_XML_BODY_CTIME(stream,time) \ FL_XML_BODY_TIME(stream,"created",time) #define FL_XML_BODY_ATIME(stream,time) \ FL_XML_BODY_TIME(stream,"accessed",time) //END of compositor the folder listing XML document inline static int is_type_fl(const char *type) { return (type && strcmp(type, XOBEX_LISTING) == 0); } static void connect_server(obex_t *handle, obex_object_t *object) { obex_headerdata_t hv; uint8_t hi; uint32_t hlen; uint8_t *target = NULL; int target_len = 0; //printf("%s()\n", __FUNCTION__); while (OBEX_ObjectGetNextHeader(handle, object, &hi, &hv, &hlen)) { switch(hi) { case OBEX_HDR_TARGET: if (0 < hlen) { if( (target = malloc(hlen))) { target_len = hlen; memcpy(target,hv.bs,target_len); } } break; default: printf("%s() Skipped header %02x\n", __FUNCTION__, hi); break; } } OBEX_ObjectSetRsp(object, OBEX_RSP_SUCCESS, OBEX_RSP_SUCCESS); hv.bq4 = connection_id; if(OBEX_ObjectAddHeader(handle, object, OBEX_HDR_CONNECTION, hv, sizeof(hv.bq4), OBEX_FL_FIT_ONE_PACKET) < 0 ) { fprintf(stderr, "Error adding header CONNECTION\n"); OBEX_ObjectDelete(handle, object); return; } if (target && target_len) { hv.bs = target; if(OBEX_ObjectAddHeader(handle,object,OBEX_HDR_WHO, hv,target_len,OBEX_FL_FIT_ONE_PACKET) < 0 ) { fprintf(stderr, "Error adding header WHO\n"); OBEX_ObjectDelete(handle, object); return; } free(target); } } static void set_server_path(obex_t *handle, obex_object_t *object) { char *name = NULL; char fullname[WORK_PATH_MAX]; // "Backup Level" and "Don't Create" flag in first byte uint8_t setpath_nohdr_dummy = 0; uint8_t *setpath_nohdr_data; obex_headerdata_t hv; uint8_t hi; uint32_t hlen; OBEX_ObjectGetNonHdrData(object, &setpath_nohdr_data); if (NULL == setpath_nohdr_data) { setpath_nohdr_data = &setpath_nohdr_dummy; printf("nohdr data not found\n"); } printf("nohdr data: %x\n", *setpath_nohdr_data); while(OBEX_ObjectGetNextHeader(handle, object, &hi, &hv, &hlen)) { switch(hi) { case OBEX_HDR_NAME: printf("%s() Found name\n", __FUNCTION__); if (0 < hlen) { if( (name = malloc(hlen / 2))) { OBEX_UnicodeToChar((uint8_t*)name, hv.bs, hlen); printf("name:%s\n", name); } } else { if (verbose) printf("set path to root\n"); chdir(init_work_path); } break; default: printf("%s() Skipped header %02x\n", __FUNCTION__, hi); } } if (name) { if (strstr(name, "/../")) { OBEX_ObjectSetRsp(object, OBEX_RSP_CONTINUE, OBEX_RSP_FORBIDDEN); } else { strcpy(fullname, CUR_DIR); strncat(fullname, name, sizeof(fullname)-1); if ((*setpath_nohdr_data & 2) == 0) { if (verbose) printf("mkdir %s\n", name); if (mkdir(fullname, 0755) < 0) { perror("requested mkdir failed"); } } if (verbose) printf("Set path to %s\n",fullname); if (chdir(fullname) < 0) { perror("requested chdir failed\n"); OBEX_ObjectSetRsp(object, OBEX_RSP_CONTINUE, OBEX_RSP_FORBIDDEN); } } free(name); name = NULL; } } // // Get the filesize in a "portable" way // static int get_filesize(const char *filename) { struct stat stats; stat(filename, &stats); if (S_ISDIR(stats.st_mode)) { fprintf(stderr,"GET of directories not implemented !!!!\n"); return -1; } return (int) stats.st_size; } // // Read a file and alloc a buffer for it // static uint8_t* easy_readfile(const char *filename, int *file_size) { int actual; int fd; uint8_t *buf; *file_size = get_filesize(filename); printf("name=%s, size=%d\n", filename, *file_size); fd = open(filename, O_RDONLY, 0); if (fd == -1) { return NULL; } buf = malloc(*file_size); if(buf == NULL) { return NULL; } actual = read(fd, buf, *file_size); close(fd); *file_size = actual; return buf; } static void get_server(obex_t *handle, obex_object_t *object) { uint8_t *buf = NULL; obex_headerdata_t hv; uint8_t hi; uint32_t hlen; int file_size; char *name = NULL; char *type = NULL; printf("%s()\n", __FUNCTION__); while(OBEX_ObjectGetNextHeader(handle, object, &hi, &hv, &hlen)) { switch(hi) { case OBEX_HDR_NAME: printf("%s() Found name\n", __FUNCTION__); if( (name = malloc(hlen / 2))) { OBEX_UnicodeToChar((uint8_t*)name, hv.bs, hlen); printf("name:%s\n", name); } break; case OBEX_HDR_TYPE: if( (type = malloc(hlen + 1))) { strcpy(type, (char *)hv.bs); } printf("%s() type:%s\n", __FUNCTION__, type); case 0xbe: // user-defined inverse push printf("%s() Found inverse push req\n", __FUNCTION__); printf("data:%02x\n", hv.bq1); break; case OBEX_HDR_APPARAM: printf("%s() Found apparam\n", __FUNCTION__); printf("name:%d (%02x %02x ...)\n", hlen, *hv.bs, *(hv.bs+1)); break; default: printf("%s() Skipped header %02x\n", __FUNCTION__, hi); } } //fprintf(stderr, "%s:%d:%s\n", __FILE__, __LINE__, __FUNCTION__); if (is_type_fl(type)) { struct dirent *dirp; DIR *dp; struct stat statdir; struct stat statbuf; char *filename; struct rawdata_stream *xmldata; xmldata = INIT_RAWDATA_STREAM(512); if (NULL == xmldata) goto out; FL_XML_VERSION(xmldata); FL_XML_TYPE(xmldata); FL_XML_BODY_BEGIN(xmldata); stat(CUR_DIR, &statdir); dp = opendir(CUR_DIR); while(NULL != dp && NULL != (dirp = readdir(dp))) { if (0 == strcmp(dirp->d_name, ".") || 0 == strcmp(dirp->d_name, "..")) continue; FL_XML_BODY_ITEM_BEGIN(xmldata); //Adding 1 bytes due to containing '\0' filename = malloc(strlen(CUR_DIR) + strlen(dirp->d_name) + 1); strcpy(filename, CUR_DIR); strcat(filename, dirp->d_name); lstat(filename, &statbuf); if (0 == S_ISDIR(statbuf.st_mode)) //it is a file FL_XML_BODY_FILENAME(xmldata, dirp->d_name); else //it is a directory FL_XML_BODY_FOLDERNAME(xmldata, dirp->d_name); FL_XML_BODY_SIZE(xmldata, statbuf.st_size); FL_XML_BODY_PERM(xmldata, statbuf.st_mode, statdir.st_mode); FL_XML_BODY_MTIME(xmldata, statbuf.st_mtime); FL_XML_BODY_CTIME(xmldata, statbuf.st_ctime); FL_XML_BODY_ATIME(xmldata, statbuf.st_atime); FL_XML_BODY_ITEM_END(xmldata); //printf("---filename:%s\n", filename); //fprintf(stderr, "%s:%d:%s\n", __FILE__, __LINE__, __FUNCTION__); free(filename); filename = NULL; //fprintf(stderr, "%s:%d:%s\n", __FILE__, __LINE__, __FUNCTION__); } //fprintf(stderr, "%s:%d:%s\n", __FILE__, __LINE__, __FUNCTION__); FL_XML_BODY_END(xmldata); closedir(dp); printf("xml doc:%s\n", xmldata->data); //composite the obex obejct OBEX_ObjectSetRsp(object, OBEX_RSP_CONTINUE, OBEX_RSP_SUCCESS); hv.bs = (uint8_t *)xmldata->data; OBEX_ObjectAddHeader(handle, object, OBEX_HDR_BODY, hv, xmldata->size, 0); hv.bq4 = xmldata->size; OBEX_ObjectAddHeader(handle, object, OBEX_HDR_LENGTH, hv, sizeof(uint32_t), 0); //fprintf(stderr, "%s:%d:%s\n", __FILE__, __LINE__, __FUNCTION__); FREE_RAWDATA_STREAM(xmldata); //fprintf(stderr, "%s:%d:%s\n", __FILE__, __LINE__, __FUNCTION__); } else if (name) { printf("%s() Got a request for %s\n", __FUNCTION__, name); buf = easy_readfile(name, &file_size); if(buf == NULL) { printf("Can't find file %s\n", name); OBEX_ObjectSetRsp(object, OBEX_RSP_NOT_FOUND, OBEX_RSP_NOT_FOUND); return; } OBEX_ObjectSetRsp(object, OBEX_RSP_CONTINUE, OBEX_RSP_SUCCESS); hv.bs = buf; OBEX_ObjectAddHeader(handle, object, OBEX_HDR_BODY, hv, file_size, 0); hv.bq4 = file_size; OBEX_ObjectAddHeader(handle, object, OBEX_HDR_LENGTH, hv, sizeof(uint32_t), 0); } else { printf("%s() Got a GET without a name-header!\n", __FUNCTION__); OBEX_ObjectSetRsp(object, OBEX_RSP_NOT_FOUND, OBEX_RSP_NOT_FOUND); return; } //fprintf(stderr, "%s:%d:%s\n", __FILE__, __LINE__, __FUNCTION__); if (NULL != buf) { free(buf); } //fprintf(stderr, "%s:%d:%s\n", __FILE__, __LINE__, __FUNCTION__); out: if (NULL != name) { free(name); } //fprintf(stderr, "%s:%d:%s\n", __FILE__, __LINE__, __FUNCTION__); if (NULL != type) { free(type); } //fprintf(stderr, "%s:%d:%s\n", __FILE__, __LINE__, __FUNCTION__); return; } /* * Function safe_save_file () * * First remove path and add "/tmp/". Then save. * */ static int safe_save_file(char *name, const uint8_t *buf, int len) { char *s = NULL; char filename[255] = {0,}; int fd; int actual; printf("Filename = %s\n", name); s = strrchr(name, '/'); if (s == NULL) s = name; else s++; strncat(filename, s, 250); fd = open(filename, O_RDWR | O_CREAT | O_EXCL, S_IRUSR|S_IWUSR|S_IRGRP|S_IROTH); if ( fd < 0) { perror( filename); return -1; } actual = write(fd, buf, len); close(fd); printf( "Wrote %s (%d bytes)\n", filename, actual); return actual; } /* * Function put_done() * * Parse what we got from a PUT * */ static void put_done(obex_t *handle, obex_object_t *object, int final) { obex_headerdata_t hv; uint8_t hi; uint32_t hlen; const uint8_t *body = NULL; int body_len = 0; static char *name = NULL; char fullname[WORK_PATH_MAX]; struct stat statbuf; //char *namebuf = NULL; fprintf(stderr, "put_done>>>\n"); while(OBEX_ObjectGetNextHeader(handle, object, &hi, &hv, &hlen)) { switch(hi) { case OBEX_HDR_BODY: body = hv.bs; body_len = hlen; fprintf(stderr, "hv.bs=%p, hlen=%d\n", hv.bs, hlen); break; case OBEX_HDR_NAME: if (NULL != name) { free(name); } if( (name = malloc(hlen / 2))) { OBEX_UnicodeToChar((uint8_t *)name, hv.bs, hlen); fprintf(stderr, "put file name: %s\n", name); } break; case OBEX_HDR_LENGTH: printf("HEADER_LENGTH = %d\n", hv.bq4); break; case HDR_CREATOR: printf("CREATORID = %#x\n", hv.bq4); break; default: printf("%s () Skipped header %02x\n", __FUNCTION__ , hi); } } if(!body) { printf("Got a PUT without a body\n"); OBEX_ObjectSetRsp(object, OBEX_RSP_CONTINUE, OBEX_RSP_SUCCESS); } if(!name) { name = strdup("OBEX_PUT_Unknown_object"); printf("Got a PUT without a name. Setting name to %s\n", name); } if (body) { safe_save_file(name, body, body_len); } if(final && !body) { strcpy(fullname, CUR_DIR); strcat(fullname, name); if (!stat(fullname, &statbuf)) { perror("stat failed"); } if (S_ISDIR(statbuf.st_mode)) { printf("Removing dir %s\n", name); rmdir(fullname); } else { printf("Deleting file %s\n", name); unlink(fullname); } } if (final) { free(name); name = NULL; fprintf(stderr, "<<= strlen(progress)) i = 0; switch(obex_cmd) { case OBEX_CMD_PUT: fprintf(stderr, "obex_ev_progress: obex_cmd_put\n"); put_done(handle, obj, 0); break; default: break; } break; case OBEX_EV_ABORT: /* Request was aborted */ printf("%s() OBEX_EV_ABORT: mode=%02x, obex_cmd=%02x, obex_rsp=%02x\n", __func__, mode, obex_cmd, obex_rsp); break; case OBEX_EV_STREAMEMPTY: //(void) cli_fillstream(cli, object); break; case OBEX_EV_UNEXPECTED: /* Unexpected data, not fatal */ break; default: printf("%s() Unhandled event %d\n", __func__, event); break; } } static void start_server(int transport) { int use_sdp = 0; obex_t *handle = NULL; struct sockaddr_in saddr; if (NULL == getcwd(init_work_path, WORK_PATH_MAX) && ERANGE == errno) { fprintf(stderr, "Wah, work path is too long, exceed %d.\n", WORK_PATH_MAX); exit(0); } if (transport==OBEX_TRANS_BLUETOOTH && 0 > obexftp_sdp_register_ftp(channel)) { //OBEX_Cleanup(handle); fprintf(stderr, "register to SDP Server failed.\n"); } else { use_sdp = 1; } reset: handle = OBEX_Init(transport, obex_event, 0); if (NULL == handle) { perror("failed to init obex."); exit(-1); } switch (transport) { case OBEX_TRANS_INET: saddr.sin_family = AF_INET; saddr.sin_port = htons(channel); #ifdef _WIN32 saddr.sin_addr.s_addr = inet_addr(device); #else (void) inet_aton(device, &saddr.sin_addr); #endif //InOBEX_ServerRegister(handle); /* always port 650 */ if (0 > OBEX_ServerRegister(handle, (struct sockaddr *)&saddr, sizeof(saddr))) { perror("failed to register inet server"); exit(-1); } break; #ifdef HAVE_BLUETOOTH case OBEX_TRANS_BLUETOOTH: if (0 > BtOBEX_ServerRegister(handle, /*bdaddr_t *bt_src*/NULL, channel)) { perror("failed to register bluetooth server"); exit(-1); } break; #endif case OBEX_TRANS_IRDA: if (0 > IrOBEX_ServerRegister(handle, "")) { perror("failed to register IrDA server"); exit(-1); } break; case OBEX_TRANS_CUSTOM: /* A simple Ericsson protocol session perhaps? */ default: fprintf(stderr, "Transport type unknown\n"); exit(-1); } printf("Waiting for connection...\n"); (void) OBEX_ServerAccept(handle, obex_event, NULL); while (!finished) { //printf("Handling connection...\n"); OBEX_HandleInput(handle, 1); } OBEX_Cleanup(handle); sleep(1); /* throttle */ if (obexftpd_reset) { fprintf(stderr, "obexftpd reset\n"); obexftpd_reset = 0; finished = 0; success = 0; goto reset; } if (use_sdp) { fprintf(stderr, "sdp unregister\n"); if (0 > obexftp_sdp_unregister_ftp()) { fprintf(stderr, "unregister from SDP Server failed.\n"); } } } int main(int argc, char *argv[]) { int c; while (1) { int option_index = 0; static struct option long_options[] = { {"irda", no_argument, NULL, 'i'}, {"bluetooth", optional_argument, NULL, 'b'}, {"tty", required_argument, NULL, 't'}, {"network", required_argument, NULL, 'n'}, {"chdir", required_argument, NULL, 'c'}, {"verbose", no_argument, NULL, 'v'}, {"version", no_argument, NULL, 'V'}, {"help", no_argument, NULL, 'h'}, {"usage", no_argument, NULL, 'h'}, {0, 0, 0, 0} }; c = getopt_long (argc, argv, "-ib::t:n:c:vVh", long_options, &option_index); if (c == -1) break; switch (c) { case 'i': start_server(OBEX_TRANS_IRDA); break; case 'b': if (optarg) { channel = atoi(optarg); } start_server(OBEX_TRANS_BLUETOOTH); fprintf(stderr, "server end\n"); break; case 'n': parsehostport(optarg, &device, &channel); //channel = atoi(optarg); start_server(OBEX_TRANS_INET); fprintf(stderr, "server end\n"); break; case 't': printf("accepting on tty not implemented yet."); /* start_server(OBEX_TRANS_CUSTOM); optarg */ break; case 'c': chdir(optarg); break; case 'v': verbose++; break; case 'V': printf("ObexFTPd %s\n", VERSION); break; case 'h': printf("ObexFTPd %s\n", VERSION); printf("Usage: %s [-c ] [-v] [-i | -b | -t | -n ]\n" "Recieve files from/to Mobile Equipment.\n" "Copyright (c) 2003-2006 Christian W. Zuckschwerdt, Alan Zhang,\n" " Hendrik Sattler, Frode Isaksen\n" "\n" " -i, --irda accept IrDA connections\n" " -b, --bluetooth [] accept bluetooth connections\n" " -t, --tty accept connections from this tty\n" " -n, --network accept network connections\n" "\n" " -c, --chdir set a default basedir\n" " -v, --verbose verbose messages\n" "\n" " -V, --version print version info\n" " -h, --help, --usage this help text\n", argv[0]); exit(0); default: printf("Try `%s --help' for more information.\n", argv[0]); } } if (optind < argc) { fprintf(stderr, "non-option ARGV-elements: "); while (optind < argc) fprintf(stderr, "%s ", argv[optind++]); fprintf(stderr, "\n"); exit (-1); } exit (0); } obexftp-0.23/apps/Makefile.in0000644000076600000240000004150211146600664013043 00000000000000# Makefile.in generated by automake 1.9.6 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = .. am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ bin_PROGRAMS = obexftp$(EXEEXT) obexftpd$(EXEEXT) noinst_PROGRAMS = discovery$(EXEEXT) subdir = apps DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/iconv.m4 \ $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/acinclude.m4 \ $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = am__installdirs = "$(DESTDIR)$(bindir)" binPROGRAMS_INSTALL = $(INSTALL_PROGRAM) PROGRAMS = $(bin_PROGRAMS) $(noinst_PROGRAMS) am_discovery_OBJECTS = discovery.$(OBJEXT) discovery_OBJECTS = $(am_discovery_OBJECTS) discovery_LDADD = $(LDADD) discovery_DEPENDENCIES = ../obexftp/libobexftp.la \ ../multicobex/libmulticobex.la ../bfb/libbfb.la am_obexftp_OBJECTS = obexftp.$(OBJEXT) obexftp_OBJECTS = $(am_obexftp_OBJECTS) obexftp_LDADD = $(LDADD) obexftp_DEPENDENCIES = ../obexftp/libobexftp.la \ ../multicobex/libmulticobex.la ../bfb/libbfb.la am_obexftpd_OBJECTS = obexftpd.$(OBJEXT) obexftpd_OBJECTS = $(am_obexftpd_OBJECTS) obexftpd_LDADD = $(LDADD) obexftpd_DEPENDENCIES = ../obexftp/libobexftp.la \ ../multicobex/libmulticobex.la ../bfb/libbfb.la DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) depcomp = $(SHELL) $(top_srcdir)/depcomp am__depfiles_maybe = depfiles COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ $(AM_LDFLAGS) $(LDFLAGS) -o $@ SOURCES = $(discovery_SOURCES) $(obexftp_SOURCES) $(obexftpd_SOURCES) DIST_SOURCES = $(discovery_SOURCES) $(obexftp_SOURCES) \ $(obexftpd_SOURCES) ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ BFB_VERSION = @BFB_VERSION@ BLUETOOTH_CFLAGS = @BLUETOOTH_CFLAGS@ BLUETOOTH_LIBS = @BLUETOOTH_LIBS@ BUILD_DOCS_FALSE = @BUILD_DOCS_FALSE@ BUILD_DOCS_TRUE = @BUILD_DOCS_TRUE@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DSYMUTIL = @DSYMUTIL@ ECHO = @ECHO@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ ENABLE_PERL_FALSE = @ENABLE_PERL_FALSE@ ENABLE_PERL_TRUE = @ENABLE_PERL_TRUE@ ENABLE_PYTHON_FALSE = @ENABLE_PYTHON_FALSE@ ENABLE_PYTHON_TRUE = @ENABLE_PYTHON_TRUE@ ENABLE_RUBY_FALSE = @ENABLE_RUBY_FALSE@ ENABLE_RUBY_TRUE = @ENABLE_RUBY_TRUE@ ENABLE_SWIG_FALSE = @ENABLE_SWIG_FALSE@ ENABLE_SWIG_TRUE = @ENABLE_SWIG_TRUE@ ENABLE_TCL_FALSE = @ENABLE_TCL_FALSE@ ENABLE_TCL_TRUE = @ENABLE_TCL_TRUE@ EXEEXT = @EXEEXT@ EXTRA_LIBS = @EXTRA_LIBS@ F77 = @F77@ FFLAGS = @FFLAGS@ GREP = @GREP@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LDFLAGS = @LDFLAGS@ LIBICONV = @LIBICONV@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LN_S = @LN_S@ LTLIBICONV = @LTLIBICONV@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MULTICOBEX_VERSION = @MULTICOBEX_VERSION@ NMEDIT = @NMEDIT@ OBEXFTP_VERSION = @OBEXFTP_VERSION@ OBJEXT = @OBJEXT@ OPENOBEX_CFLAGS = @OPENOBEX_CFLAGS@ OPENOBEX_LIBS = @OPENOBEX_LIBS@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ PKG_CONFIG = @PKG_CONFIG@ PYTHON = @PYTHON@ PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@ PYTHON_PLATFORM = @PYTHON_PLATFORM@ PYTHON_PREFIX = @PYTHON_PREFIX@ PYTHON_VERSION = @PYTHON_VERSION@ RANLIB = @RANLIB@ REQUIRES = @REQUIRES@ RUBY = @RUBY@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ SWIG = @SWIG@ SWIG_LIB = @SWIG_LIB@ TCLSH = @TCLSH@ VERSION = @VERSION@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_F77 = @ac_ct_F77@ ac_perl_enabled = @ac_perl_enabled@ ac_python_enabled = @ac_python_enabled@ ac_ruby_enabled = @ac_ruby_enabled@ ac_tcl_enabled = @ac_tcl_enabled@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ pkgpyexecdir = @pkgpyexecdir@ pkgpythondir = @pkgpythondir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ pyexecdir = @pyexecdir@ pythondir = @pythondir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ AM_CFLAGS = @OPENOBEX_CFLAGS@ \ -I$(top_srcdir) \ -I$(top_srcdir)/includes LDADD = ../obexftp/libobexftp.la \ ../multicobex/libmulticobex.la \ ../bfb/libbfb.la \ @OPENOBEX_LIBS@ \ @BLUETOOTH_LIBS@ \ @LTLIBICONV@ \ @EXTRA_LIBS@ obexftp_SOURCES = obexftp.c obexftpd_SOURCES = obexftpd.c stress_SOURCES = stress.c discovery_SOURCES = discovery.c all: all-am .SUFFIXES: .SUFFIXES: .c .lo .o .obj $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu apps/Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --gnu apps/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh install-binPROGRAMS: $(bin_PROGRAMS) @$(NORMAL_INSTALL) test -z "$(bindir)" || $(mkdir_p) "$(DESTDIR)$(bindir)" @list='$(bin_PROGRAMS)'; for p in $$list; do \ p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ if test -f $$p \ || test -f $$p1 \ ; then \ f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \ else :; fi; \ done uninstall-binPROGRAMS: @$(NORMAL_UNINSTALL) @list='$(bin_PROGRAMS)'; for p in $$list; do \ f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \ rm -f "$(DESTDIR)$(bindir)/$$f"; \ done clean-binPROGRAMS: @list='$(bin_PROGRAMS)'; for p in $$list; do \ f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ echo " rm -f $$p $$f"; \ rm -f $$p $$f ; \ done clean-noinstPROGRAMS: @list='$(noinst_PROGRAMS)'; for p in $$list; do \ f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ echo " rm -f $$p $$f"; \ rm -f $$p $$f ; \ done discovery$(EXEEXT): $(discovery_OBJECTS) $(discovery_DEPENDENCIES) @rm -f discovery$(EXEEXT) $(LINK) $(discovery_LDFLAGS) $(discovery_OBJECTS) $(discovery_LDADD) $(LIBS) obexftp$(EXEEXT): $(obexftp_OBJECTS) $(obexftp_DEPENDENCIES) @rm -f obexftp$(EXEEXT) $(LINK) $(obexftp_LDFLAGS) $(obexftp_OBJECTS) $(obexftp_LDADD) $(LIBS) obexftpd$(EXEEXT): $(obexftpd_OBJECTS) $(obexftpd_DEPENDENCIES) @rm -f obexftpd$(EXEEXT) $(LINK) $(obexftpd_LDFLAGS) $(obexftpd_OBJECTS) $(obexftpd_LDADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/discovery.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/obexftp.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/obexftpd.Po@am__quote@ .c.o: @am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ @am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c $< .c.obj: @am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ @am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` .c.lo: @am__fastdepCC_TRUE@ if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ @am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool uninstall-info-am: ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ mkid -fID $$unique tags: TAGS TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique; \ fi ctags: CTAGS CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(CTAGS_ARGS)$$tags$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ list='$(DISTFILES)'; for file in $$list; do \ case $$file in \ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ esac; \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ dir="/$$dir"; \ $(mkdir_p) "$(distdir)$$dir"; \ else \ dir=''; \ fi; \ if test -d $$d/$$file; then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(PROGRAMS) installdirs: for dir in "$(DESTDIR)$(bindir)"; do \ test -z "$$dir" || $(mkdir_p) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-binPROGRAMS clean-generic clean-libtool \ clean-noinstPROGRAMS mostlyclean-am distclean: distclean-am -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-libtool distclean-tags dvi: dvi-am dvi-am: html: html-am info: info-am info-am: install-data-am: install-exec-am: install-binPROGRAMS install-info: install-info-am install-man: installcheck-am: maintainer-clean: maintainer-clean-am -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-binPROGRAMS uninstall-info-am .PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \ clean-generic clean-libtool clean-noinstPROGRAMS ctags \ distclean distclean-compile distclean-generic \ distclean-libtool distclean-tags distdir dvi dvi-am html \ html-am info info-am install install-am install-binPROGRAMS \ install-data install-data-am install-exec install-exec-am \ install-info install-info-am install-man install-strip \ installcheck installcheck-am installdirs maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-compile \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags uninstall uninstall-am uninstall-binPROGRAMS \ uninstall-info-am # splint -type -predboolint -nullassign -unrecog -nullpass -I.. obexftp_cli.c # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: obexftp-0.23/apps/Makefile.am0000644000076600000240000000103311146600644013023 00000000000000AM_CFLAGS = @OPENOBEX_CFLAGS@ \ -I$(top_srcdir) \ -I$(top_srcdir)/includes LDADD = ../obexftp/libobexftp.la \ ../multicobex/libmulticobex.la \ ../bfb/libbfb.la \ @OPENOBEX_LIBS@ \ @BLUETOOTH_LIBS@ \ @LTLIBICONV@ \ @EXTRA_LIBS@ obexftp_SOURCES = obexftp.c obexftpd_SOURCES = obexftpd.c stress_SOURCES = stress.c discovery_SOURCES = discovery.c bin_PROGRAMS = obexftp obexftpd noinst_PROGRAMS = discovery # splint -type -predboolint -nullassign -unrecog -nullpass -I.. obexftp_cli.c obexftp-0.23/depcomp0000755000076600000240000003710011146600665011410 00000000000000#! /bin/sh # depcomp - compile a program generating dependencies as side-effects scriptversion=2005-07-09.11 # Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA # 02110-1301, USA. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Originally written by Alexandre Oliva . case $1 in '') echo "$0: No command. Try \`$0 --help' for more information." 1>&2 exit 1; ;; -h | --h*) cat <<\EOF Usage: depcomp [--help] [--version] PROGRAM [ARGS] Run PROGRAMS ARGS to compile a file, generating dependencies as side-effects. Environment variables: depmode Dependency tracking mode. source Source file read by `PROGRAMS ARGS'. object Object file output by `PROGRAMS ARGS'. DEPDIR directory where to store dependencies. depfile Dependency file to output. tmpdepfile Temporary file to use when outputing dependencies. libtool Whether libtool is used (yes/no). Report bugs to . EOF exit $? ;; -v | --v*) echo "depcomp $scriptversion" exit $? ;; esac if test -z "$depmode" || test -z "$source" || test -z "$object"; then echo "depcomp: Variables source, object and depmode must be set" 1>&2 exit 1 fi # Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. depfile=${depfile-`echo "$object" | sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} rm -f "$tmpdepfile" # Some modes work just like other modes, but use different flags. We # parameterize here, but still list the modes in the big case below, # to make depend.m4 easier to write. Note that we *cannot* use a case # here, because this file can only contain one case statement. if test "$depmode" = hp; then # HP compiler uses -M and no extra arg. gccflag=-M depmode=gcc fi if test "$depmode" = dashXmstdout; then # This is just like dashmstdout with a different argument. dashmflag=-xM depmode=dashmstdout fi case "$depmode" in gcc3) ## gcc 3 implements dependency tracking that does exactly what ## we want. Yay! Note: for some reason libtool 1.4 doesn't like ## it if -MD -MP comes after the -MF stuff. Hmm. "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi mv "$tmpdepfile" "$depfile" ;; gcc) ## There are various ways to get dependency output from gcc. Here's ## why we pick this rather obscure method: ## - Don't want to use -MD because we'd like the dependencies to end ## up in a subdir. Having to rename by hand is ugly. ## (We might end up doing this anyway to support other compilers.) ## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like ## -MM, not -M (despite what the docs say). ## - Using -M directly means running the compiler twice (even worse ## than renaming). if test -z "$gccflag"; then gccflag=-MD, fi "$@" -Wp,"$gccflag$tmpdepfile" stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" echo "$object : \\" > "$depfile" alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz ## The second -e expression handles DOS-style file names with drive letters. sed -e 's/^[^:]*: / /' \ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" ## This next piece of magic avoids the `deleted header file' problem. ## The problem is that when a header file which appears in a .P file ## is deleted, the dependency causes make to die (because there is ## typically no way to rebuild the header). We avoid this by adding ## dummy dependencies for each header file. Too bad gcc doesn't do ## this for us directly. tr ' ' ' ' < "$tmpdepfile" | ## Some versions of gcc put a space before the `:'. On the theory ## that the space means something, we add a space to the output as ## well. ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; hp) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; sgi) if test "$libtool" = yes; then "$@" "-Wp,-MDupdate,$tmpdepfile" else "$@" -MDupdate "$tmpdepfile" fi stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files echo "$object : \\" > "$depfile" # Clip off the initial element (the dependent). Don't try to be # clever and replace this with sed code, as IRIX sed won't handle # lines with more than a fixed number of characters (4096 in # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; # the IRIX cc adds comments like `#:fec' to the end of the # dependency line. tr ' ' ' ' < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ tr ' ' ' ' >> $depfile echo >> $depfile # The second pass generates a dummy entry for each header file. tr ' ' ' ' < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ >> $depfile else # The sourcefile does not contain any dependencies, so just # store a dummy comment line, to avoid errors with the Makefile # "include basename.Plo" scheme. echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" ;; aix) # The C for AIX Compiler uses -M and outputs the dependencies # in a .u file. In older versions, this file always lives in the # current directory. Also, the AIX compiler puts `$object:' at the # start of each line; $object doesn't have directory information. # Version 6 uses the directory in both cases. stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'` tmpdepfile="$stripped.u" if test "$libtool" = yes; then "$@" -Wc,-M else "$@" -M fi stat=$? if test -f "$tmpdepfile"; then : else stripped=`echo "$stripped" | sed 's,^.*/,,'` tmpdepfile="$stripped.u" fi if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi if test -f "$tmpdepfile"; then outname="$stripped.o" # Each line is of the form `foo.o: dependent.h'. # Do two passes, one to just change these to # `$object: dependent.h' and one to simply `dependent.h:'. sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile" sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile" else # The sourcefile does not contain any dependencies, so just # store a dummy comment line, to avoid errors with the Makefile # "include basename.Plo" scheme. echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" ;; icc) # Intel's C compiler understands `-MD -MF file'. However on # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c # ICC 7.0 will fill foo.d with something like # foo.o: sub/foo.c # foo.o: sub/foo.h # which is wrong. We want: # sub/foo.o: sub/foo.c # sub/foo.o: sub/foo.h # sub/foo.c: # sub/foo.h: # ICC 7.1 will output # foo.o: sub/foo.c sub/foo.h # and will wrap long lines using \ : # foo.o: sub/foo.c ... \ # sub/foo.h ... \ # ... "$@" -MD -MF "$tmpdepfile" stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" # Each line is of the form `foo.o: dependent.h', # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. # Do two passes, one to just change these to # `$object: dependent.h' and one to simply `dependent.h:'. sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" # Some versions of the HPUX 10.20 sed can't process this invocation # correctly. Breaking it into two sed invocations is a workaround. sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; tru64) # The Tru64 compiler uses -MD to generate dependencies as a side # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put # dependencies in `foo.d' instead, so we check for that too. # Subdirectories are respected. dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` test "x$dir" = "x$object" && dir= base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` if test "$libtool" = yes; then # With Tru64 cc, shared objects can also be used to make a # static library. This mecanism is used in libtool 1.4 series to # handle both shared and static libraries in a single compilation. # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d. # # With libtool 1.5 this exception was removed, and libtool now # generates 2 separate objects for the 2 libraries. These two # compilations output dependencies in in $dir.libs/$base.o.d and # in $dir$base.o.d. We have to check for both files, because # one of the two compilations can be disabled. We should prefer # $dir$base.o.d over $dir.libs/$base.o.d because the latter is # automatically cleaned when .libs/ is deleted, while ignoring # the former would cause a distcleancheck panic. tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4 tmpdepfile2=$dir$base.o.d # libtool 1.5 tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5 tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504 "$@" -Wc,-MD else tmpdepfile1=$dir$base.o.d tmpdepfile2=$dir$base.d tmpdepfile3=$dir$base.d tmpdepfile4=$dir$base.d "$@" -MD fi stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" do test -f "$tmpdepfile" && break done if test -f "$tmpdepfile"; then sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" # That's a tab and a space in the []. sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" else echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" ;; #nosideeffect) # This comment above is used by automake to tell side-effect # dependency tracking mechanisms from slower ones. dashmstdout) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout, regardless of -o. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test $1 != '--mode=compile'; do shift done shift fi # Remove `-o $object'. IFS=" " for arg do case $arg in -o) shift ;; $object) shift ;; *) set fnord "$@" "$arg" shift # fnord shift # $arg ;; esac done test -z "$dashmflag" && dashmflag=-M # Require at least two characters before searching for `:' # in the target name. This is to cope with DOS-style filenames: # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise. "$@" $dashmflag | sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" rm -f "$depfile" cat < "$tmpdepfile" > "$depfile" tr ' ' ' ' < "$tmpdepfile" | \ ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; dashXmstdout) # This case only exists to satisfy depend.m4. It is never actually # run, as this mode is specially recognized in the preamble. exit 1 ;; makedepend) "$@" || exit $? # Remove any Libtool call if test "$libtool" = yes; then while test $1 != '--mode=compile'; do shift done shift fi # X makedepend shift cleared=no for arg in "$@"; do case $cleared in no) set ""; shift cleared=yes ;; esac case "$arg" in -D*|-I*) set fnord "$@" "$arg"; shift ;; # Strip any option that makedepend may not understand. Remove # the object too, otherwise makedepend will parse it as a source file. -*|$object) ;; *) set fnord "$@" "$arg"; shift ;; esac done obj_suffix="`echo $object | sed 's/^.*\././'`" touch "$tmpdepfile" ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" rm -f "$depfile" cat < "$tmpdepfile" > "$depfile" sed '1,2d' "$tmpdepfile" | tr ' ' ' ' | \ ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" "$tmpdepfile".bak ;; cpp) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test $1 != '--mode=compile'; do shift done shift fi # Remove `-o $object'. IFS=" " for arg do case $arg in -o) shift ;; $object) shift ;; *) set fnord "$@" "$arg" shift # fnord shift # $arg ;; esac done "$@" -E | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | sed '$ s: \\$::' > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" cat < "$tmpdepfile" >> "$depfile" sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; msvisualcpp) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout, regardless of -o, # because we must use -o when running libtool. "$@" || exit $? IFS=" " for arg do case "$arg" in "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") set fnord "$@" shift shift ;; *) set fnord "$@" "$arg" shift shift ;; esac done "$@" -E | sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" echo " " >> "$depfile" . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile" rm -f "$tmpdepfile" ;; none) exec "$@" ;; *) echo "Unknown depmode $depmode" 1>&2 exit 1 ;; esac exit 0 # Local Variables: # mode: shell-script # sh-indentation: 2 # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-end: "$" # End: obexftp-0.23/doc/0000777000076600000240000000000011146603263010660 500000000000000obexftp-0.23/doc/obexftpd.1.html0000644000076600000240000002006211146601116013427 00000000000000 OBEXFTPD(1)

SYNOPSIS

obexftpd [OPTIONS] [TRANSPORT]

DESCRIPTION

With obexftpd you can set up an obex server on any computers using IrDA, Bluetooth or TCP/IP. Use e.g. obexftp or the ObexFS to access the files on this server.

OPTIONS

The ordering of options is important. The first transport option will start the server. Use basedir and verbose options prior to any transport. See EXAMPLES

Transport Options

-i, --irda

Acceopt connections using the IrDA protocol.

-b, --bluetooth

Accept connections via bluetooth.

-t device, --tty device

Accept connections from this tty device. NOT WORKING!

-n host, --network host

Accept connections from the network to this port.

Setting The File Path

-c folder, --chdir folder

Set the base directory for the server.

Version Information And Help

-v, --verbose

Be verbose and give some additional infos.

-V, --version

Print version string and exit.

-h, --help, --usage

Print short usage instructions.

EXAMPLES

Start listening for bluetooth connections and use a safe basedir:

obexftpd -c /tmp/inbox -b

SEE ALSO

obexftp(1), openobex(3), obexftp(3), multicobex(3), libbfb(3).

BUGS

Bugs ? Features !

NOTES

The software has been tested and reported working on at least Siemens, Ericsson, and Nokia phones.

AUTHOR

Christian W. Zuckschwerdt <zany@triq.net> Alan Zhang <vibra@tom.com>

obexftp-0.23/doc/obexftp.1.html0000644000076600000240000003101011146601116013256 00000000000000 OBEXFTP(1)

SYNOPSIS

obexftp [OPTION] [COMMANDS]

DESCRIPTION

obexftp is used to access files on mobile equipment, i.e. cell phones. With obexftpd you can transfer files between any computers using IrDA, Bluetooth and TCP/IP.

This tool lets you access the ObexFTP library by the means of a command line interface. You might consider using the other means available. E.g. the ObexFS filesystem for Linux.

OPTIONS

The ordering of options is important. Every command will use the most recent device set. Every file without command switch will apply to the command given most recent. See EXAMPLES

Transport Options

-i, --irda

Connect using the IrDA protocol. This is the default.

-b device, --bluetooth device

Connect to this bluetooth device. If the device is not given the first device found will be used.

-B number, --channel number

Use this bluetooth channel when connecting. The channel will be discoverd automatically if this option is not used.

-d no/address, --hci no/address

Use the bluetooth device referenced by number or address as source device for the connection.

-u intf no, --usb intf no

Connect to this usb interface or list all available usb interfaces.

-t device, --tty device

Connect to this tty device.

-n host, --network host

Connect to this network host.

Compatibility Options

-U uuid, --uuid uuid

Select the UUID to connect with. Recognized values are currently "none" needed by some Nokia mobile devices, "FBS" (default) for the normal file browsing service, "IRMC" for IRMC synchronisation and "S45" when connecting to a Siemens Mobile phone via cable or "SHARP" for PCSOFTWARE UUID with Sharp devices.

-H, --noconn

Suppress connection IDs (i.e. send no connection header to the mobile).

-S, --nopath

Don't use "setpath" commands (i.e. send the whole path as filename to the mobile). Can be used together with --noconn and --uuid none to send an OBEX-PUSH.

Setting The File Path

-c folder, --chdir folder

Set the mobiles current working directory.

-C folder, --mkdir folder

Set the mobiles current working directory. The folder will be created if it doesn't exist.

-l folder, --list folder

List a folder.

Sending And Retrieving Files

-o path, --output path

Specify the target file name, overriding the implicit local name from --get or the implicit remote name from --put

-g source, --get source

Retrieve files from mobile.

-G source, --getdelete source

Retrieve files from mobile and delete them on the mobile

-p source, --put source

Send files to the mobile.

-k source, --delete source

Delete files from the mobile.

Experimental Extras

-X, --capability

Retrieve the capability object from the mobile (if available).

-Y, --probe

Probe and report device characteristics

-x, --info

Retrieve misc infos from mobile. I.e. memory size and free memory. Siemens specific for now.

-m src dest, --move src dest

Move (rename) files on the mobile. Siemens specific for now.

Version Information And Help

-v, --verbose

Be verbose and give some additional infos.

-V, --version

Print version string and exit.

-h, --help, --usage

Print short usage instructions.

EXAMPLES

To get the directory listing from the first irda device

obexftp -i -l or just obexftp -l as IrDA is the default.

To get the file bar from directory foo from the first bluetooth device

obexftp -b -c foo -g bar

To send the file bar to directory foo with device on first serial port

obexftp -t /dev/ttyS0 -c foo -p bar

It is possible to use RfComm (serial port over bluetooth)

obexftp -t /dev/rfcomm0 -c foo -p bar

And also IrComm (serial port over IrDA)

obexftp -t /dev/ircomm0 -c foo -p bar

To send the file bar using plain OBEX PUSH

obexftp --bluetooth --nopath --noconn --uuid none --put bar

SEE ALSO

obexftpd(1), openobex(3), obexftp(3), multicobex(3), libbfb(3).

BUGS

Bugs ? Features !

NOTES

The software has been tested and reported working on at least Siemens, Ericsson, and Nokia phones.

AUTHOR

Christian W. Zuckschwerdt <zany@triq.net>

obexftp-0.23/doc/obexftpd.10000644000076600000240000000347111146601115012470 00000000000000'\" -*- coding: us-ascii -*- .if \n(.g .ds T< \\FC .if \n(.g .ds T> \\F[\n[.fam]] .de URL \\$2 \(la\\$1\(ra\\$3 .. .if \n(.g .mso www.tmac .TH obexftpd 1 "17 February 2009" "" "" .SH NAME obexftpd \- Mobile Equipment file transfer server .SH SYNOPSIS \fBobexftpd\fR [\fIOPTIONS\fR] [\fITRANSPORT\fR] .SH DESCRIPTION With \fBobexftpd\fR you can set up an obex server on any computers using \fBIrDA\fR, \fBBluetooth\fR or \fBTCP/IP\fR. Use e.g. \fBobexftp\fR or the \fBObexFS\fR to access the files on this server. .SH OPTIONS The ordering of options is important. The first transport option will start the server. Use basedir and verbose options prior to any transport. See \fBEXAMPLES\fR .SS "TRANSPORT OPTIONS" .TP \fB-i\fR, \fB--irda\fR Acceopt connections using the IrDA protocol. .TP \fB-b\fR, \fB--bluetooth\fR Accept connections via bluetooth. .TP \fB-t\fR \fIdevice\fR, \fB--tty\fR \fIdevice\fR Accept connections from this tty device. NOT WORKING! .TP \fB-n\fR \fIhost\fR, \fB--network\fR \fIhost\fR Accept connections from the network to this port. .SS "SETTING THE FILE PATH" .TP \fB-c\fR \fIfolder\fR, \fB--chdir\fR \fIfolder\fR Set the base directory for the server. .SS "VERSION INFORMATION AND HELP" .TP \fB-v\fR, \fB--verbose\fR Be verbose and give some additional infos. .TP \fB-V\fR, \fB--version\fR Print version string and exit. .TP \fB-h\fR, \fB--help\fR, \fB--usage\fR Print short usage instructions. .SH EXAMPLES .TP Start listening for bluetooth connections and use a safe basedir: \fBobexftpd -c /tmp/inbox -b\fR .SH "SEE ALSO" obexftp(1), openobex(3), obexftp(3), multicobex(3), libbfb(3). .SH BUGS Bugs ? Features ! .SH NOTES The software has been tested and reported working on at least Siemens, Ericsson, and Nokia phones. .SH AUTHOR Christian W. Zuckschwerdt Alan Zhang obexftp-0.23/doc/obexftpd.1.txt0000644000076600000240000000300211146600644013302 00000000000000= OBEXFTPD(1) == NAME obexftpd - Mobile Equipment file transfer server == SYNOPSIS *obexftpd* [_OPTIONS_] [_TRANSPORT_] == DESCRIPTION With *obexftpd* you can set up an obex server on any computers using *IrDA*, *Bluetooth* or *TCP/IP*. Use e.g. *obexftp* or the *ObexFS* to access the files on this server. == OPTIONS The ordering of options is important. The first transport option will start the server. Use basedir and verbose options prior to any transport. See *EXAMPLES* === Transport Options *-i*, *--irda*:: Acceopt connections using the IrDA protocol. *-b*, *--bluetooth*:: Accept connections via bluetooth. *-t* _device_, *--tty* _device_:: Accept connections from this tty device. NOT WORKING! *-n* _host_, *--network* _host_:: Accept connections from the network to this port. === Setting The File Path *-c* _folder_, *--chdir* _folder_:: Set the base directory for the server. === Version Information And Help *-v*, *--verbose*:: Be verbose and give some additional infos. *-V*, *--version*:: Print version string and exit. *-h*, *--help*, *--usage*:: Print short usage instructions. == EXAMPLES Start listening for bluetooth connections and use a safe basedir::: *obexftpd -c /tmp/inbox -b* == SEE ALSO obexftp(1), openobex(3), obexftp(3), multicobex(3), libbfb(3). == BUGS Bugs ? Features ! == NOTES The software has been tested and reported working on at least Siemens, Ericsson, and Nokia phones. == AUTHOR Christian W. Zuckschwerdt Alan Zhang obexftp-0.23/doc/obexftp.1.txt0000644000076600000240000001045111146600644013144 00000000000000= OBEXFTP(1) == NAME obexftp - Mobile Equipment file transfer tool == SYNOPSIS *obexftp* [_OPTION_] [_COMMANDS_] == DESCRIPTION *obexftp* is used to access files on mobile equipment, i.e. cell phones. With *obexftpd* you can transfer files between any computers using *IrDA*, *Bluetooth* and *TCP/IP*. This tool lets you access the *ObexFTP* library by the means of a command line interface. You might consider using the other means available. E.g. the *ObexFS* filesystem for Linux. == OPTIONS The ordering of options is important. Every command will use the most recent device set. Every file without command switch will apply to the command given most recent. See *EXAMPLES* === Transport Options *-i*, *--irda*:: Connect using the IrDA protocol. This is the default. *-b* _device_, *--bluetooth* _device_:: Connect to this bluetooth device. If the device is not given the first device found will be used. *-B* _number_, *--channel* _number_:: Use this bluetooth channel when connecting. The channel will be discoverd automatically if this option is not used. *-d* _no/address_, *--hci* _no/address_:: Use the bluetooth device referenced by number or address as source device for the connection. *-u* _intf no_, *--usb* _intf no_:: Connect to this usb interface or list all available usb interfaces. *-t* _device_, *--tty* _device_:: Connect to this tty device. *-n* _host_, *--network* _host_:: Connect to this network host. === Compatibility Options *-U* _uuid_, *--uuid* _uuid_:: Select the UUID to connect with. Recognized values are currently "none" needed by some Nokia mobile devices, "FBS" (default) for the normal file browsing service, "IRMC" for IRMC synchronisation and "S45" when connecting to a Siemens Mobile phone via cable or "SHARP" for PCSOFTWARE UUID with Sharp devices. *-H*, *--noconn*:: Suppress connection IDs (i.e. send no connection header to the mobile). *-S*, *--nopath*:: Don't use "setpath" commands (i.e. send the whole path as filename to the mobile). Can be used together with *--noconn* and *--uuid none* to send an OBEX-PUSH. === Setting The File Path *-c* _folder_, *--chdir* _folder_:: Set the mobiles current working directory. *-C* _folder_, *--mkdir* _folder_:: Set the mobiles current working directory. The folder will be created if it doesn't exist. *-l* _folder_, *--list* _folder_:: List a folder. === Sending And Retrieving Files *-o* _path_, *--output* _path_:: Specify the target file name, overriding the implicit local name from *--get* or the implicit remote name from *--put* *-g* _source_, *--get* _source_:: Retrieve files from mobile. *-G* _source_, *--getdelete* _source_:: Retrieve files from mobile and delete them on the mobile *-p* _source_, *--put* _source_:: Send files to the mobile. *-k* _source_, *--delete* _source_:: Delete files from the mobile. === Experimental Extras *-X*, *--capability*:: Retrieve the capability object from the mobile (if available). *-Y*, *--probe*:: Probe and report device characteristics *-x*, *--info*:: Retrieve misc infos from mobile. I.e. memory size and free memory. Siemens specific for now. *-m* _src_ _dest_, *--move* _src_ _dest_:: Move (rename) files on the mobile. Siemens specific for now. === Version Information And Help *-v*, *--verbose*:: Be verbose and give some additional infos. *-V*, *--version*:: Print version string and exit. *-h*, *--help*, *--usage*:: Print short usage instructions. == EXAMPLES To get the directory listing from the first irda device:: *obexftp -i -l* or just *obexftp -l* as IrDA is the default. To get the file bar from directory foo from the first bluetooth device:: *obexftp -b -c foo -g bar* To send the file bar to directory foo with device on first serial port:: *obexftp -t /dev/ttyS0 -c foo -p bar* It is possible to use RfComm (serial port over bluetooth):: *obexftp -t /dev/rfcomm0 -c foo -p bar* And also IrComm (serial port over IrDA):: *obexftp -t /dev/ircomm0 -c foo -p bar* To send the file bar using plain OBEX PUSH:: *obexftp --bluetooth --nopath --noconn --uuid none --put bar* == SEE ALSO obexftpd(1), openobex(3), obexftp(3), multicobex(3), libbfb(3). == BUGS Bugs ? Features ! == NOTES The software has been tested and reported working on at least Siemens, Ericsson, and Nokia phones. == AUTHOR Christian W. Zuckschwerdt obexftp-0.23/doc/obexftp.10000644000076600000240000001166411146601115012327 00000000000000'\" -*- coding: us-ascii -*- .if \n(.g .ds T< \\FC .if \n(.g .ds T> \\F[\n[.fam]] .de URL \\$2 \(la\\$1\(ra\\$3 .. .if \n(.g .mso www.tmac .TH obexftp 1 "17 February 2009" "" "" .SH NAME obexftp \- Mobile Equipment file transfer tool .SH SYNOPSIS \fBobexftp\fR [\fIOPTION\fR] [\fICOMMANDS\fR] .SH DESCRIPTION \fBobexftp\fR is used to access files on mobile equipment, i.e. cell phones. With \fBobexftpd\fR you can transfer files between any computers using \fBIrDA\fR, \fBBluetooth\fR and \fBTCP/IP\fR. .PP This tool lets you access the \fBObexFTP\fR library by the means of a command line interface. You might consider using the other means available. E.g. the \fBObexFS\fR filesystem for Linux. .SH OPTIONS The ordering of options is important. Every command will use the most recent device set. Every file without command switch will apply to the command given most recent. See \fBEXAMPLES\fR .SS "TRANSPORT OPTIONS" .TP \fB-i\fR, \fB--irda\fR Connect using the IrDA protocol. This is the default. .TP \fB-b\fR \fIdevice\fR, \fB--bluetooth\fR \fIdevice\fR Connect to this bluetooth device. If the device is not given the first device found will be used. .TP \fB-B\fR \fInumber\fR, \fB--channel\fR \fInumber\fR Use this bluetooth channel when connecting. The channel will be discoverd automatically if this option is not used. .TP \fB-d\fR \fIno/address\fR, \fB--hci\fR \fIno/address\fR Use the bluetooth device referenced by number or address as source device for the connection. .TP \fB-u\fR \fIintf no\fR, \fB--usb\fR \fIintf no\fR Connect to this usb interface or list all available usb interfaces. .TP \fB-t\fR \fIdevice\fR, \fB--tty\fR \fIdevice\fR Connect to this tty device. .TP \fB-n\fR \fIhost\fR, \fB--network\fR \fIhost\fR Connect to this network host. .SS "COMPATIBILITY OPTIONS" .TP \fB-U\fR \fIuuid\fR, \fB--uuid\fR \fIuuid\fR Select the UUID to connect with. Recognized values are currently "none" needed by some Nokia mobile devices, "FBS" (default) for the normal file browsing service, "IRMC" for IRMC synchronisation and "S45" when connecting to a Siemens Mobile phone via cable or "SHARP" for PCSOFTWARE UUID with Sharp devices. .TP \fB-H\fR, \fB--noconn\fR Suppress connection IDs (i.e. send no connection header to the mobile). .TP \fB-S\fR, \fB--nopath\fR Don't use "setpath" commands (i.e. send the whole path as filename to the mobile). Can be used together with \fB--noconn\fR and \fB--uuid none\fR to send an OBEX-PUSH. .SS "SETTING THE FILE PATH" .TP \fB-c\fR \fIfolder\fR, \fB--chdir\fR \fIfolder\fR Set the mobiles current working directory. .TP \fB-C\fR \fIfolder\fR, \fB--mkdir\fR \fIfolder\fR Set the mobiles current working directory. The folder will be created if it doesn't exist. .TP \fB-l\fR \fIfolder\fR, \fB--list\fR \fIfolder\fR List a folder. .SS "SENDING AND RETRIEVING FILES" .TP \fB-o\fR \fIpath\fR, \fB--output\fR \fIpath\fR Specify the target file name, overriding the implicit local name from \fB--get\fR or the implicit remote name from \fB--put\fR .TP \fB-g\fR \fIsource\fR, \fB--get\fR \fIsource\fR Retrieve files from mobile. .TP \fB-G\fR \fIsource\fR, \fB--getdelete\fR \fIsource\fR Retrieve files from mobile and delete them on the mobile .TP \fB-p\fR \fIsource\fR, \fB--put\fR \fIsource\fR Send files to the mobile. .TP \fB-k\fR \fIsource\fR, \fB--delete\fR \fIsource\fR Delete files from the mobile. .SS "EXPERIMENTAL EXTRAS" .TP \fB-X\fR, \fB--capability\fR Retrieve the capability object from the mobile (if available). .TP \fB-Y\fR, \fB--probe\fR Probe and report device characteristics .TP \fB-x\fR, \fB--info\fR Retrieve misc infos from mobile. I.e. memory size and free memory. Siemens specific for now. .TP \fB-m\fR \fIsrc\fR \fIdest\fR, \fB--move\fR \fIsrc\fR \fIdest\fR Move (rename) files on the mobile. Siemens specific for now. .SS "VERSION INFORMATION AND HELP" .TP \fB-v\fR, \fB--verbose\fR Be verbose and give some additional infos. .TP \fB-V\fR, \fB--version\fR Print version string and exit. .TP \fB-h\fR, \fB--help\fR, \fB--usage\fR Print short usage instructions. .SH EXAMPLES .TP To get the directory listing from the first irda device \fBobexftp -i -l\fR or just \fBobexftp -l\fR as IrDA is the default. .TP To get the file bar from directory foo from the first bluetooth device \fBobexftp -b -c foo -g bar\fR .TP To send the file bar to directory foo with device on first serial port \fBobexftp -t /dev/ttyS0 -c foo -p bar\fR .TP It is possible to use RfComm (serial port over bluetooth) \fBobexftp -t /dev/rfcomm0 -c foo -p bar\fR .TP And also IrComm (serial port over IrDA) \fBobexftp -t /dev/ircomm0 -c foo -p bar\fR .TP To send the file bar using plain OBEX PUSH \fBobexftp --bluetooth --nopath --noconn --uuid none --put bar\fR .SH "SEE ALSO" obexftpd(1), openobex(3), obexftp(3), multicobex(3), libbfb(3). .SH BUGS Bugs ? Features ! .SH NOTES The software has been tested and reported working on at least Siemens, Ericsson, and Nokia phones. .SH AUTHOR Christian W. Zuckschwerdt obexftp-0.23/doc/Makefile.in0000644000076600000240000003030711146600665012647 00000000000000# Makefile.in generated by automake 1.9.6 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ # only maintainer needs to build doc # asciidoc, docbook2X needed srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = .. am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = doc DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/iconv.m4 \ $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/acinclude.m4 \ $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = SOURCES = DIST_SOURCES = man1dir = $(mandir)/man1 am__installdirs = "$(DESTDIR)$(man1dir)" NROFF = nroff MANS = $(man_MANS) DATA = $(noinst_DATA) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ BFB_VERSION = @BFB_VERSION@ BLUETOOTH_CFLAGS = @BLUETOOTH_CFLAGS@ BLUETOOTH_LIBS = @BLUETOOTH_LIBS@ BUILD_DOCS_FALSE = @BUILD_DOCS_FALSE@ BUILD_DOCS_TRUE = @BUILD_DOCS_TRUE@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DSYMUTIL = @DSYMUTIL@ ECHO = @ECHO@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ ENABLE_PERL_FALSE = @ENABLE_PERL_FALSE@ ENABLE_PERL_TRUE = @ENABLE_PERL_TRUE@ ENABLE_PYTHON_FALSE = @ENABLE_PYTHON_FALSE@ ENABLE_PYTHON_TRUE = @ENABLE_PYTHON_TRUE@ ENABLE_RUBY_FALSE = @ENABLE_RUBY_FALSE@ ENABLE_RUBY_TRUE = @ENABLE_RUBY_TRUE@ ENABLE_SWIG_FALSE = @ENABLE_SWIG_FALSE@ ENABLE_SWIG_TRUE = @ENABLE_SWIG_TRUE@ ENABLE_TCL_FALSE = @ENABLE_TCL_FALSE@ ENABLE_TCL_TRUE = @ENABLE_TCL_TRUE@ EXEEXT = @EXEEXT@ EXTRA_LIBS = @EXTRA_LIBS@ F77 = @F77@ FFLAGS = @FFLAGS@ GREP = @GREP@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LDFLAGS = @LDFLAGS@ LIBICONV = @LIBICONV@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LN_S = @LN_S@ LTLIBICONV = @LTLIBICONV@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MULTICOBEX_VERSION = @MULTICOBEX_VERSION@ NMEDIT = @NMEDIT@ OBEXFTP_VERSION = @OBEXFTP_VERSION@ OBJEXT = @OBJEXT@ OPENOBEX_CFLAGS = @OPENOBEX_CFLAGS@ OPENOBEX_LIBS = @OPENOBEX_LIBS@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ PKG_CONFIG = @PKG_CONFIG@ PYTHON = @PYTHON@ PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@ PYTHON_PLATFORM = @PYTHON_PLATFORM@ PYTHON_PREFIX = @PYTHON_PREFIX@ PYTHON_VERSION = @PYTHON_VERSION@ RANLIB = @RANLIB@ REQUIRES = @REQUIRES@ RUBY = @RUBY@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ SWIG = @SWIG@ SWIG_LIB = @SWIG_LIB@ TCLSH = @TCLSH@ VERSION = @VERSION@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_F77 = @ac_ct_F77@ ac_perl_enabled = @ac_perl_enabled@ ac_python_enabled = @ac_python_enabled@ ac_ruby_enabled = @ac_ruby_enabled@ ac_tcl_enabled = @ac_tcl_enabled@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ pkgpyexecdir = @pkgpyexecdir@ pkgpythondir = @pkgpythondir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ pyexecdir = @pyexecdir@ pythondir = @pythondir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ EXTRA_DIST = $(man_MANS) $(noinst_DATA) man_MANS = obexftp.1 obexftpd.1 noinst_DATA = obexftp.1.txt obexftp.1.html \ obexftpd.1.txt obexftpd.1.html @BUILD_DOCS_TRUE@SUFFIXES = .1 .1.txt .1.html @BUILD_DOCS_TRUE@CLEANFILES = obexftp.1.xml obexftp.1 obexftp.1.html \ @BUILD_DOCS_TRUE@ obexftpd.1.xml obexftpd.1 obexftpd.1.html all: all-am .SUFFIXES: .SUFFIXES: .1 .1.txt .1.html $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --gnu doc/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool uninstall-info-am: install-man1: $(man1_MANS) $(man_MANS) @$(NORMAL_INSTALL) test -z "$(man1dir)" || $(mkdir_p) "$(DESTDIR)$(man1dir)" @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ for i in $$l2; do \ case "$$i" in \ *.1*) list="$$list $$i" ;; \ esac; \ done; \ for i in $$list; do \ if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ else file=$$i; fi; \ ext=`echo $$i | sed -e 's/^.*\\.//'`; \ case "$$ext" in \ 1*) ;; \ *) ext='1' ;; \ esac; \ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ inst=`echo $$inst | sed -e 's/^.*\///'`; \ inst=`echo $$inst | sed '$(transform)'`.$$ext; \ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \ done uninstall-man1: @$(NORMAL_UNINSTALL) @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ for i in $$l2; do \ case "$$i" in \ *.1*) list="$$list $$i" ;; \ esac; \ done; \ for i in $$list; do \ ext=`echo $$i | sed -e 's/^.*\\.//'`; \ case "$$ext" in \ 1*) ;; \ *) ext='1' ;; \ esac; \ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ inst=`echo $$inst | sed -e 's/^.*\///'`; \ inst=`echo $$inst | sed '$(transform)'`.$$ext; \ echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \ rm -f "$(DESTDIR)$(man1dir)/$$inst"; \ done tags: TAGS TAGS: ctags: CTAGS CTAGS: distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ list='$(DISTFILES)'; for file in $$list; do \ case $$file in \ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ esac; \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ dir="/$$dir"; \ $(mkdir_p) "$(distdir)$$dir"; \ else \ dir=''; \ fi; \ if test -d $$d/$$file; then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(MANS) $(DATA) installdirs: for dir in "$(DESTDIR)$(man1dir)"; do \ test -z "$$dir" || $(mkdir_p) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic distclean-libtool dvi: dvi-am dvi-am: html: html-am info: info-am info-am: install-data-am: install-man install-exec-am: install-info: install-info-am install-man: install-man1 installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-info-am uninstall-man uninstall-man: uninstall-man1 .PHONY: all all-am check check-am clean clean-generic clean-libtool \ distclean distclean-generic distclean-libtool distdir dvi \ dvi-am html html-am info info-am install install-am \ install-data install-data-am install-exec install-exec-am \ install-info install-info-am install-man install-man1 \ install-strip installcheck installcheck-am installdirs \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ uninstall uninstall-am uninstall-info-am uninstall-man \ uninstall-man1 @BUILD_DOCS_TRUE@.1.txt.1: @BUILD_DOCS_TRUE@ asciidoc --doctype=manpage --backend=docbook $< @BUILD_DOCS_TRUE@ docbook2man $*.1.xml @BUILD_DOCS_TRUE@.1.txt.1.html: @BUILD_DOCS_TRUE@ asciidoc --doctype=manpage --backend=xhtml11 $< # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: obexftp-0.23/doc/Makefile.am0000644000076600000240000000102011146600644012621 00000000000000# only maintainer needs to build doc # asciidoc, docbook2X needed EXTRA_DIST = $(man_MANS) $(noinst_DATA) man_MANS = obexftp.1 obexftpd.1 noinst_DATA = obexftp.1.txt obexftp.1.html \ obexftpd.1.txt obexftpd.1.html if BUILD_DOCS SUFFIXES = .1 .1.txt .1.html .1.txt.1: asciidoc --doctype=manpage --backend=docbook $< docbook2man $*.1.xml .1.txt.1.html: asciidoc --doctype=manpage --backend=xhtml11 $< CLEANFILES = obexftp.1.xml obexftp.1 obexftp.1.html \ obexftpd.1.xml obexftpd.1 obexftpd.1.html endif obexftp-0.23/THANKS0000644000076600000240000000253011146600644010742 00000000000000stef - helped in initial S45 (BFB) research Erich Schubert - provided a debian package Eduard Bloch - Debian maintainer since 2003. Jan Metz - supplied RH8 box and SL45i, ObexFTP info page Carsten Pfeiffer - coded a kio slave Jorge Ventura - write/select patch François Fleuret - suggested transport checks Adam Goode and Ken Booth - setpath Soren S. Jorvang - NetBSD portability fixes Bruce Simpson - FreeBSD portability fixes David Haslam - Sony-Ericsson fixes Philip Kovacs - connection id support Alan Zhang - daemon application Frode Isaksen - obexftpd improvements Simon Ruggier - cobex write patch Hendrik Sattler - various cleanups and hints Sergey Vlasov sugg. LDADD to LIBADD Alan J. McFarlane - rep. invalid conn_id in disconnect Dr. Johannes Zellner - spotted month/day swapping in atotime Martin Storsjö - PCSUITE over FTP sugg. for Series 60 2nd Ed. Manuel Naranjo - hci selection draft Andrey Rahmatullin - Motorola SLVR L2 cobex fix Adam Williamson - Python distutils testing obexftp-0.23/ltmain.sh0000644000076600000240000060646710752724126011676 00000000000000# ltmain.sh - Provide generalized library-building support services. # NOTE: Changing this file will not affect anything until you rerun configure. # # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, # 2007, 2008 Free Software Foundation, Inc. # Originally by Gordon Matzigkeit , 1996 # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. basename="s,^.*/,,g" # Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh # is ksh but when the shell is invoked as "sh" and the current value of # the _XPG environment variable is not equal to 1 (one), the special # positional parameter $0, within a function call, is the name of the # function. progpath="$0" # The name of this program: progname=`echo "$progpath" | $SED $basename` modename="$progname" # Global variables: EXIT_SUCCESS=0 EXIT_FAILURE=1 PROGRAM=ltmain.sh PACKAGE=libtool VERSION="1.5.26 Debian 1.5.26-1ubuntu1" TIMESTAMP=" (1.1220.2.493 2008/02/01 16:58:18)" # Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE). if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac fi BIN_SH=xpg4; export BIN_SH # for Tru64 DUALCASE=1; export DUALCASE # for MKS sh # Check that we have a working $echo. if test "X$1" = X--no-reexec; then # Discard the --no-reexec flag, and continue. shift elif test "X$1" = X--fallback-echo; then # Avoid inline document here, it may be left over : elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then # Yippee, $echo works! : else # Restart under the correct shell, and then maybe $echo will work. exec $SHELL "$progpath" --no-reexec ${1+"$@"} fi if test "X$1" = X--fallback-echo; then # used as fallback echo shift cat <&2 $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 exit $EXIT_FAILURE fi # Global variables. mode=$default_mode nonopt= prev= prevopt= run= show="$echo" show_help= execute_dlfiles= duplicate_deps=no preserve_args= lo2o="s/\\.lo\$/.${objext}/" o2lo="s/\\.${objext}\$/.lo/" extracted_archives= extracted_serial=0 ##################################### # Shell function definitions: # This seems to be the best place for them # func_mktempdir [string] # Make a temporary directory that won't clash with other running # libtool processes, and avoids race conditions if possible. If # given, STRING is the basename for that directory. func_mktempdir () { my_template="${TMPDIR-/tmp}/${1-$progname}" if test "$run" = ":"; then # Return a directory name, but don't create it in dry-run mode my_tmpdir="${my_template}-$$" else # If mktemp works, use that first and foremost my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` if test ! -d "$my_tmpdir"; then # Failing that, at least try and use $RANDOM to avoid a race my_tmpdir="${my_template}-${RANDOM-0}$$" save_mktempdir_umask=`umask` umask 0077 $mkdir "$my_tmpdir" umask $save_mktempdir_umask fi # If we're not in dry-run mode, bomb out on failure test -d "$my_tmpdir" || { $echo "cannot create temporary directory \`$my_tmpdir'" 1>&2 exit $EXIT_FAILURE } fi $echo "X$my_tmpdir" | $Xsed } # func_win32_libid arg # return the library type of file 'arg' # # Need a lot of goo to handle *both* DLLs and import libs # Has to be a shell function in order to 'eat' the argument # that is supplied when $file_magic_command is called. func_win32_libid () { win32_libid_type="unknown" win32_fileres=`file -L $1 2>/dev/null` case $win32_fileres in *ar\ archive\ import\ library*) # definitely import win32_libid_type="x86 archive import" ;; *ar\ archive*) # could be an import, or static if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \ $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then win32_nmres=`eval $NM -f posix -A $1 | \ $SED -n -e '1,100{ / I /{ s,.*,import, p q } }'` case $win32_nmres in import*) win32_libid_type="x86 archive import";; *) win32_libid_type="x86 archive static";; esac fi ;; *DLL*) win32_libid_type="x86 DLL" ;; *executable*) # but shell scripts are "executable" too... case $win32_fileres in *MS\ Windows\ PE\ Intel*) win32_libid_type="x86 DLL" ;; esac ;; esac $echo $win32_libid_type } # func_infer_tag arg # Infer tagged configuration to use if any are available and # if one wasn't chosen via the "--tag" command line option. # Only attempt this if the compiler in the base compile # command doesn't match the default compiler. # arg is usually of the form 'gcc ...' func_infer_tag () { if test -n "$available_tags" && test -z "$tagname"; then CC_quoted= for arg in $CC; do case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac CC_quoted="$CC_quoted $arg" done case $@ in # Blanks in the command may have been stripped by the calling shell, # but not from the CC environment variable when configure was run. " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;; # Blanks at the start of $base_compile will cause this to fail # if we don't check for them as well. *) for z in $available_tags; do if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then # Evaluate the configuration. eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" CC_quoted= for arg in $CC; do # Double-quote args containing other shell metacharacters. case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac CC_quoted="$CC_quoted $arg" done case "$@ " in " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) # The compiler in the base compile command matches # the one in the tagged configuration. # Assume this is the tagged configuration we want. tagname=$z break ;; esac fi done # If $tagname still isn't set, then no tagged configuration # was found and let the user know that the "--tag" command # line option must be used. if test -z "$tagname"; then $echo "$modename: unable to infer tagged configuration" $echo "$modename: specify a tag with \`--tag'" 1>&2 exit $EXIT_FAILURE # else # $echo "$modename: using $tagname tagged configuration" fi ;; esac fi } # func_extract_an_archive dir oldlib func_extract_an_archive () { f_ex_an_ar_dir="$1"; shift f_ex_an_ar_oldlib="$1" $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)" $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $? if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then : else $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2 exit $EXIT_FAILURE fi } # func_extract_archives gentop oldlib ... func_extract_archives () { my_gentop="$1"; shift my_oldlibs=${1+"$@"} my_oldobjs="" my_xlib="" my_xabs="" my_xdir="" my_status="" $show "${rm}r $my_gentop" $run ${rm}r "$my_gentop" $show "$mkdir $my_gentop" $run $mkdir "$my_gentop" my_status=$? if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then exit $my_status fi for my_xlib in $my_oldlibs; do # Extract the objects. case $my_xlib in [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; *) my_xabs=`pwd`"/$my_xlib" ;; esac my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'` my_xlib_u=$my_xlib while :; do case " $extracted_archives " in *" $my_xlib_u "*) extracted_serial=`expr $extracted_serial + 1` my_xlib_u=lt$extracted_serial-$my_xlib ;; *) break ;; esac done extracted_archives="$extracted_archives $my_xlib_u" my_xdir="$my_gentop/$my_xlib_u" $show "${rm}r $my_xdir" $run ${rm}r "$my_xdir" $show "$mkdir $my_xdir" $run $mkdir "$my_xdir" exit_status=$? if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then exit $exit_status fi case $host in *-darwin*) $show "Extracting $my_xabs" # Do not bother doing anything if just a dry run if test -z "$run"; then darwin_orig_dir=`pwd` cd $my_xdir || exit $? darwin_archive=$my_xabs darwin_curdir=`pwd` darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'` darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null` if test -n "$darwin_arches"; then darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'` darwin_arch= $show "$darwin_base_archive has multiple architectures $darwin_arches" for darwin_arch in $darwin_arches ; do mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}" lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" func_extract_an_archive "`pwd`" "${darwin_base_archive}" cd "$darwin_curdir" $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" done # $darwin_arches ## Okay now we have a bunch of thin objects, gotta fatten them up :) darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP` darwin_file= darwin_files= for darwin_file in $darwin_filelist; do darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP` lipo -create -output "$darwin_file" $darwin_files done # $darwin_filelist ${rm}r unfat-$$ cd "$darwin_orig_dir" else cd "$darwin_orig_dir" func_extract_an_archive "$my_xdir" "$my_xabs" fi # $darwin_arches fi # $run ;; *) func_extract_an_archive "$my_xdir" "$my_xabs" ;; esac my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` done func_extract_archives_result="$my_oldobjs" } # End of Shell function definitions ##################################### # Darwin sucks eval std_shrext=\"$shrext_cmds\" disable_libs=no # Parse our command line options once, thoroughly. while test "$#" -gt 0 do arg="$1" shift case $arg in -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;; *) optarg= ;; esac # If the previous option needs an argument, assign it. if test -n "$prev"; then case $prev in execute_dlfiles) execute_dlfiles="$execute_dlfiles $arg" ;; tag) tagname="$arg" preserve_args="${preserve_args}=$arg" # Check whether tagname contains only valid characters case $tagname in *[!-_A-Za-z0-9,/]*) $echo "$progname: invalid tag name: $tagname" 1>&2 exit $EXIT_FAILURE ;; esac case $tagname in CC) # Don't test for the "default" C tag, as we know, it's there, but # not specially marked. ;; *) if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then taglist="$taglist $tagname" # Evaluate the configuration. eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`" else $echo "$progname: ignoring unknown tag $tagname" 1>&2 fi ;; esac ;; *) eval "$prev=\$arg" ;; esac prev= prevopt= continue fi # Have we seen a non-optional argument yet? case $arg in --help) show_help=yes ;; --version) echo "\ $PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP Copyright (C) 2008 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." exit $? ;; --config) ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath # Now print the configurations for the tags. for tagname in $taglist; do ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath" done exit $? ;; --debug) $echo "$progname: enabling shell trace mode" set -x preserve_args="$preserve_args $arg" ;; --dry-run | -n) run=: ;; --features) $echo "host: $host" if test "$build_libtool_libs" = yes; then $echo "enable shared libraries" else $echo "disable shared libraries" fi if test "$build_old_libs" = yes; then $echo "enable static libraries" else $echo "disable static libraries" fi exit $? ;; --finish) mode="finish" ;; --mode) prevopt="--mode" prev=mode ;; --mode=*) mode="$optarg" ;; --preserve-dup-deps) duplicate_deps="yes" ;; --quiet | --silent) show=: preserve_args="$preserve_args $arg" ;; --tag) prevopt="--tag" prev=tag preserve_args="$preserve_args --tag" ;; --tag=*) set tag "$optarg" ${1+"$@"} shift prev=tag preserve_args="$preserve_args --tag" ;; -dlopen) prevopt="-dlopen" prev=execute_dlfiles ;; -*) $echo "$modename: unrecognized option \`$arg'" 1>&2 $echo "$help" 1>&2 exit $EXIT_FAILURE ;; *) nonopt="$arg" break ;; esac done if test -n "$prevopt"; then $echo "$modename: option \`$prevopt' requires an argument" 1>&2 $echo "$help" 1>&2 exit $EXIT_FAILURE fi case $disable_libs in no) ;; shared) build_libtool_libs=no build_old_libs=yes ;; static) build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` ;; esac # If this variable is set in any of the actions, the command in it # will be execed at the end. This prevents here-documents from being # left over by shells. exec_cmd= if test -z "$show_help"; then # Infer the operation mode. if test -z "$mode"; then $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2 $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2 case $nonopt in *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*) mode=link for arg do case $arg in -c) mode=compile break ;; esac done ;; *db | *dbx | *strace | *truss) mode=execute ;; *install*|cp|mv) mode=install ;; *rm) mode=uninstall ;; *) # If we have no mode, but dlfiles were specified, then do execute mode. test -n "$execute_dlfiles" && mode=execute # Just use the default operation mode. if test -z "$mode"; then if test -n "$nonopt"; then $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2 else $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2 fi fi ;; esac fi # Only execute mode is allowed to have -dlopen flags. if test -n "$execute_dlfiles" && test "$mode" != execute; then $echo "$modename: unrecognized option \`-dlopen'" 1>&2 $echo "$help" 1>&2 exit $EXIT_FAILURE fi # Change the help message to a mode-specific one. generic_help="$help" help="Try \`$modename --help --mode=$mode' for more information." # These modes are in order of execution frequency so that they run quickly. case $mode in # libtool compile mode compile) modename="$modename: compile" # Get the compilation command and the source file. base_compile= srcfile="$nonopt" # always keep a non-empty value in "srcfile" suppress_opt=yes suppress_output= arg_mode=normal libobj= later= for arg do case $arg_mode in arg ) # do not "continue". Instead, add this to base_compile lastarg="$arg" arg_mode=normal ;; target ) libobj="$arg" arg_mode=normal continue ;; normal ) # Accept any command-line options. case $arg in -o) if test -n "$libobj" ; then $echo "$modename: you cannot specify \`-o' more than once" 1>&2 exit $EXIT_FAILURE fi arg_mode=target continue ;; -static | -prefer-pic | -prefer-non-pic) later="$later $arg" continue ;; -no-suppress) suppress_opt=no continue ;; -Xcompiler) arg_mode=arg # the next one goes into the "base_compile" arg list continue # The current "srcfile" will either be retained or ;; # replaced later. I would guess that would be a bug. -Wc,*) args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"` lastarg= save_ifs="$IFS"; IFS=',' for arg in $args; do IFS="$save_ifs" # Double-quote args containing other shell metacharacters. # Many Bourne shells cannot handle close brackets correctly # in scan sets, so we specify it separately. case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac lastarg="$lastarg $arg" done IFS="$save_ifs" lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"` # Add the arguments to base_compile. base_compile="$base_compile $lastarg" continue ;; * ) # Accept the current argument as the source file. # The previous "srcfile" becomes the current argument. # lastarg="$srcfile" srcfile="$arg" ;; esac # case $arg ;; esac # case $arg_mode # Aesthetically quote the previous argument. lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"` case $lastarg in # Double-quote args containing other shell metacharacters. # Many Bourne shells cannot handle close brackets correctly # in scan sets, and some SunOS ksh mistreat backslash-escaping # in scan sets (worked around with variable expansion), # and furthermore cannot handle '|' '&' '(' ')' in scan sets # at all, so we specify them separately. *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") lastarg="\"$lastarg\"" ;; esac base_compile="$base_compile $lastarg" done # for arg case $arg_mode in arg) $echo "$modename: you must specify an argument for -Xcompile" exit $EXIT_FAILURE ;; target) $echo "$modename: you must specify a target with \`-o'" 1>&2 exit $EXIT_FAILURE ;; *) # Get the name of the library object. [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'` ;; esac # Recognize several different file suffixes. # If the user specifies -o file.o, it is replaced with file.lo xform='[cCFSifmso]' case $libobj in *.ada) xform=ada ;; *.adb) xform=adb ;; *.ads) xform=ads ;; *.asm) xform=asm ;; *.c++) xform=c++ ;; *.cc) xform=cc ;; *.ii) xform=ii ;; *.class) xform=class ;; *.cpp) xform=cpp ;; *.cxx) xform=cxx ;; *.[fF][09]?) xform=[fF][09]. ;; *.for) xform=for ;; *.java) xform=java ;; *.obj) xform=obj ;; *.sx) xform=sx ;; esac libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"` case $libobj in *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;; *) $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2 exit $EXIT_FAILURE ;; esac func_infer_tag $base_compile for arg in $later; do case $arg in -static) build_old_libs=yes continue ;; -prefer-pic) pic_mode=yes continue ;; -prefer-non-pic) pic_mode=no continue ;; esac done qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"` case $qlibobj in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") qlibobj="\"$qlibobj\"" ;; esac test "X$libobj" != "X$qlibobj" \ && $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' &()|`$[]' \ && $echo "$modename: libobj name \`$libobj' may not contain shell special characters." objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` if test "X$xdir" = "X$obj"; then xdir= else xdir=$xdir/ fi lobj=${xdir}$objdir/$objname if test -z "$base_compile"; then $echo "$modename: you must specify a compilation command" 1>&2 $echo "$help" 1>&2 exit $EXIT_FAILURE fi # Delete any leftover library objects. if test "$build_old_libs" = yes; then removelist="$obj $lobj $libobj ${libobj}T" else removelist="$lobj $libobj ${libobj}T" fi $run $rm $removelist trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15 # On Cygwin there's no "real" PIC flag so we must build both object types case $host_os in cygwin* | mingw* | pw32* | os2*) pic_mode=default ;; esac if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then # non-PIC code in shared libraries is not supported pic_mode=default fi # Calculate the filename of the output object if compiler does # not support -o with -c if test "$compiler_c_o" = no; then output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} lockfile="$output_obj.lock" removelist="$removelist $output_obj $lockfile" trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15 else output_obj= need_locks=no lockfile= fi # Lock this critical section if it is needed # We use this script file to make the link, it avoids creating a new file if test "$need_locks" = yes; then until $run ln "$progpath" "$lockfile" 2>/dev/null; do $show "Waiting for $lockfile to be removed" sleep 2 done elif test "$need_locks" = warn; then if test -f "$lockfile"; then $echo "\ *** ERROR, $lockfile exists and contains: `cat $lockfile 2>/dev/null` This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support \`-c' and \`-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $run $rm $removelist exit $EXIT_FAILURE fi $echo "$srcfile" > "$lockfile" fi if test -n "$fix_srcfile_path"; then eval srcfile=\"$fix_srcfile_path\" fi qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"` case $qsrcfile in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") qsrcfile="\"$qsrcfile\"" ;; esac $run $rm "$libobj" "${libobj}T" # Create a libtool object file (analogous to a ".la" file), # but don't create it if we're doing a dry run. test -z "$run" && cat > ${libobj}T </dev/null`" != "X$srcfile"; then $echo "\ *** ERROR, $lockfile contains: `cat $lockfile 2>/dev/null` but it should contain: $srcfile This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support \`-c' and \`-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $run $rm $removelist exit $EXIT_FAILURE fi # Just move the object if needed, then go on to compile the next one if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then $show "$mv $output_obj $lobj" if $run $mv $output_obj $lobj; then : else error=$? $run $rm $removelist exit $error fi fi # Append the name of the PIC object to the libtool object file. test -z "$run" && cat >> ${libobj}T <> ${libobj}T </dev/null`" != "X$srcfile"; then $echo "\ *** ERROR, $lockfile contains: `cat $lockfile 2>/dev/null` but it should contain: $srcfile This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support \`-c' and \`-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $run $rm $removelist exit $EXIT_FAILURE fi # Just move the object if needed if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then $show "$mv $output_obj $obj" if $run $mv $output_obj $obj; then : else error=$? $run $rm $removelist exit $error fi fi # Append the name of the non-PIC object the libtool object file. # Only append if the libtool object file exists. test -z "$run" && cat >> ${libobj}T <> ${libobj}T <&2 fi if test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi prefer_static_libs=yes ;; -static) if test -z "$pic_flag" && test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi prefer_static_libs=built ;; -static-libtool-libs) if test -z "$pic_flag" && test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi prefer_static_libs=yes ;; esac build_libtool_libs=no build_old_libs=yes break ;; esac done # See if our shared archives depend on static archives. test -n "$old_archive_from_new_cmds" && build_old_libs=yes # Go through the arguments, transforming them on the way. while test "$#" -gt 0; do arg="$1" shift case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test ;; *) qarg=$arg ;; esac libtool_args="$libtool_args $qarg" # If the previous option needs an argument, assign it. if test -n "$prev"; then case $prev in output) compile_command="$compile_command @OUTPUT@" finalize_command="$finalize_command @OUTPUT@" ;; esac case $prev in dlfiles|dlprefiles) if test "$preload" = no; then # Add the symbol object into the linking commands. compile_command="$compile_command @SYMFILE@" finalize_command="$finalize_command @SYMFILE@" preload=yes fi case $arg in *.la | *.lo) ;; # We handle these cases below. force) if test "$dlself" = no; then dlself=needless export_dynamic=yes fi prev= continue ;; self) if test "$prev" = dlprefiles; then dlself=yes elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then dlself=yes else dlself=needless export_dynamic=yes fi prev= continue ;; *) if test "$prev" = dlfiles; then dlfiles="$dlfiles $arg" else dlprefiles="$dlprefiles $arg" fi prev= continue ;; esac ;; expsyms) export_symbols="$arg" if test ! -f "$arg"; then $echo "$modename: symbol file \`$arg' does not exist" exit $EXIT_FAILURE fi prev= continue ;; expsyms_regex) export_symbols_regex="$arg" prev= continue ;; inst_prefix) inst_prefix_dir="$arg" prev= continue ;; precious_regex) precious_files_regex="$arg" prev= continue ;; release) release="-$arg" prev= continue ;; objectlist) if test -f "$arg"; then save_arg=$arg moreargs= for fil in `cat $save_arg` do # moreargs="$moreargs $fil" arg=$fil # A libtool-controlled object. # Check to see that this really is a libtool object. if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then pic_object= non_pic_object= # Read the .lo file # If there is no directory component, then add one. case $arg in */* | *\\*) . $arg ;; *) . ./$arg ;; esac if test -z "$pic_object" || \ test -z "$non_pic_object" || test "$pic_object" = none && \ test "$non_pic_object" = none; then $echo "$modename: cannot find name of object for \`$arg'" 1>&2 exit $EXIT_FAILURE fi # Extract subdirectory from the argument. xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` if test "X$xdir" = "X$arg"; then xdir= else xdir="$xdir/" fi if test "$pic_object" != none; then # Prepend the subdirectory the object is found in. pic_object="$xdir$pic_object" if test "$prev" = dlfiles; then if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then dlfiles="$dlfiles $pic_object" prev= continue else # If libtool objects are unsupported, then we need to preload. prev=dlprefiles fi fi # CHECK ME: I think I busted this. -Ossama if test "$prev" = dlprefiles; then # Preload the old-style object. dlprefiles="$dlprefiles $pic_object" prev= fi # A PIC object. libobjs="$libobjs $pic_object" arg="$pic_object" fi # Non-PIC object. if test "$non_pic_object" != none; then # Prepend the subdirectory the object is found in. non_pic_object="$xdir$non_pic_object" # A standard non-PIC object non_pic_objects="$non_pic_objects $non_pic_object" if test -z "$pic_object" || test "$pic_object" = none ; then arg="$non_pic_object" fi else # If the PIC object exists, use it instead. # $xdir was prepended to $pic_object above. non_pic_object="$pic_object" non_pic_objects="$non_pic_objects $non_pic_object" fi else # Only an error if not doing a dry-run. if test -z "$run"; then $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 exit $EXIT_FAILURE else # Dry-run case. # Extract subdirectory from the argument. xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` if test "X$xdir" = "X$arg"; then xdir= else xdir="$xdir/" fi pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` libobjs="$libobjs $pic_object" non_pic_objects="$non_pic_objects $non_pic_object" fi fi done else $echo "$modename: link input file \`$save_arg' does not exist" exit $EXIT_FAILURE fi arg=$save_arg prev= continue ;; rpath | xrpath) # We need an absolute path. case $arg in [\\/]* | [A-Za-z]:[\\/]*) ;; *) $echo "$modename: only absolute run-paths are allowed" 1>&2 exit $EXIT_FAILURE ;; esac if test "$prev" = rpath; then case "$rpath " in *" $arg "*) ;; *) rpath="$rpath $arg" ;; esac else case "$xrpath " in *" $arg "*) ;; *) xrpath="$xrpath $arg" ;; esac fi prev= continue ;; xcompiler) compiler_flags="$compiler_flags $qarg" prev= compile_command="$compile_command $qarg" finalize_command="$finalize_command $qarg" continue ;; xlinker) linker_flags="$linker_flags $qarg" compiler_flags="$compiler_flags $wl$qarg" prev= compile_command="$compile_command $wl$qarg" finalize_command="$finalize_command $wl$qarg" continue ;; xcclinker) linker_flags="$linker_flags $qarg" compiler_flags="$compiler_flags $qarg" prev= compile_command="$compile_command $qarg" finalize_command="$finalize_command $qarg" continue ;; shrext) shrext_cmds="$arg" prev= continue ;; darwin_framework|darwin_framework_skip) test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags $arg" compile_command="$compile_command $arg" finalize_command="$finalize_command $arg" prev= continue ;; *) eval "$prev=\"\$arg\"" prev= continue ;; esac fi # test -n "$prev" prevarg="$arg" case $arg in -all-static) if test -n "$link_static_flag"; then compile_command="$compile_command $link_static_flag" finalize_command="$finalize_command $link_static_flag" fi continue ;; -allow-undefined) # FIXME: remove this flag sometime in the future. $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2 continue ;; -avoid-version) avoid_version=yes continue ;; -dlopen) prev=dlfiles continue ;; -dlpreopen) prev=dlprefiles continue ;; -export-dynamic) export_dynamic=yes continue ;; -export-symbols | -export-symbols-regex) if test -n "$export_symbols" || test -n "$export_symbols_regex"; then $echo "$modename: more than one -exported-symbols argument is not allowed" exit $EXIT_FAILURE fi if test "X$arg" = "X-export-symbols"; then prev=expsyms else prev=expsyms_regex fi continue ;; -framework|-arch|-isysroot) case " $CC " in *" ${arg} ${1} "* | *" ${arg} ${1} "*) prev=darwin_framework_skip ;; *) compiler_flags="$compiler_flags $arg" prev=darwin_framework ;; esac compile_command="$compile_command $arg" finalize_command="$finalize_command $arg" continue ;; -inst-prefix-dir) prev=inst_prefix continue ;; # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* # so, if we see these flags be careful not to treat them like -L -L[A-Z][A-Z]*:*) case $with_gcc/$host in no/*-*-irix* | /*-*-irix*) compile_command="$compile_command $arg" finalize_command="$finalize_command $arg" ;; esac continue ;; -L*) dir=`$echo "X$arg" | $Xsed -e 's/^-L//'` # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) absdir=`cd "$dir" && pwd` if test -z "$absdir"; then $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2 absdir="$dir" notinst_path="$notinst_path $dir" fi dir="$absdir" ;; esac case "$deplibs " in *" -L$dir "*) ;; *) deplibs="$deplibs -L$dir" lib_search_path="$lib_search_path $dir" ;; esac case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'` case :$dllsearchpath: in *":$dir:"*) ;; *) dllsearchpath="$dllsearchpath:$dir";; esac case :$dllsearchpath: in *":$testbindir:"*) ;; *) dllsearchpath="$dllsearchpath:$testbindir";; esac ;; esac continue ;; -l*) if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*) # These systems don't actually have a C or math library (as such) continue ;; *-*-os2*) # These systems don't actually have a C library (as such) test "X$arg" = "X-lc" && continue ;; *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) # Do not include libc due to us having libc/libc_r. test "X$arg" = "X-lc" && continue ;; *-*-rhapsody* | *-*-darwin1.[012]) # Rhapsody C and math libraries are in the System framework deplibs="$deplibs -framework System" continue ;; *-*-sco3.2v5* | *-*-sco5v6*) # Causes problems with __ctype test "X$arg" = "X-lc" && continue ;; *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) # Compiler inserts libc in the correct place for threads to work test "X$arg" = "X-lc" && continue ;; esac elif test "X$arg" = "X-lc_r"; then case $host in *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) # Do not include libc_r directly, use -pthread flag. continue ;; esac fi deplibs="$deplibs $arg" continue ;; # Tru64 UNIX uses -model [arg] to determine the layout of C++ # classes, name mangling, and exception handling. -model) compile_command="$compile_command $arg" compiler_flags="$compiler_flags $arg" finalize_command="$finalize_command $arg" prev=xcompiler continue ;; -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) compiler_flags="$compiler_flags $arg" compile_command="$compile_command $arg" finalize_command="$finalize_command $arg" continue ;; -multi_module) single_module="${wl}-multi_module" continue ;; -module) module=yes continue ;; # -64, -mips[0-9] enable 64-bit mode on the SGI compiler # -r[0-9][0-9]* specifies the processor on the SGI compiler # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler # +DA*, +DD* enable 64-bit mode on the HP compiler # -q* pass through compiler args for the IBM compiler # -m* pass through architecture-specific compiler args for GCC # -m*, -t[45]*, -txscale* pass through architecture-specific # compiler args for GCC # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC # -F/path gives path to uninstalled frameworks, gcc on darwin # @file GCC response files -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*) # Unknown arguments in both finalize_command and compile_command need # to be aesthetically quoted because they are evaled later. arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac compile_command="$compile_command $arg" finalize_command="$finalize_command $arg" compiler_flags="$compiler_flags $arg" continue ;; -shrext) prev=shrext continue ;; -no-fast-install) fast_install=no continue ;; -no-install) case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin*) # The PATH hackery in wrapper scripts is required on Windows # and Darwin in order for the loader to find any dlls it needs. $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2 $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2 fast_install=no ;; *) no_install=yes ;; esac continue ;; -no-undefined) allow_undefined=no continue ;; -objectlist) prev=objectlist continue ;; -o) prev=output ;; -precious-files-regex) prev=precious_regex continue ;; -release) prev=release continue ;; -rpath) prev=rpath continue ;; -R) prev=xrpath continue ;; -R*) dir=`$echo "X$arg" | $Xsed -e 's/^-R//'` # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) $echo "$modename: only absolute run-paths are allowed" 1>&2 exit $EXIT_FAILURE ;; esac case "$xrpath " in *" $dir "*) ;; *) xrpath="$xrpath $dir" ;; esac continue ;; -static | -static-libtool-libs) # The effects of -static are defined in a previous loop. # We used to do the same as -all-static on platforms that # didn't have a PIC flag, but the assumption that the effects # would be equivalent was wrong. It would break on at least # Digital Unix and AIX. continue ;; -thread-safe) thread_safe=yes continue ;; -version-info) prev=vinfo continue ;; -version-number) prev=vinfo vinfo_number=yes continue ;; -Wc,*) args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'` arg= save_ifs="$IFS"; IFS=',' for flag in $args; do IFS="$save_ifs" case $flag in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") flag="\"$flag\"" ;; esac arg="$arg $wl$flag" compiler_flags="$compiler_flags $flag" done IFS="$save_ifs" arg=`$echo "X$arg" | $Xsed -e "s/^ //"` ;; -Wl,*) args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'` arg= save_ifs="$IFS"; IFS=',' for flag in $args; do IFS="$save_ifs" case $flag in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") flag="\"$flag\"" ;; esac arg="$arg $wl$flag" compiler_flags="$compiler_flags $wl$flag" linker_flags="$linker_flags $flag" done IFS="$save_ifs" arg=`$echo "X$arg" | $Xsed -e "s/^ //"` ;; -Xcompiler) prev=xcompiler continue ;; -Xlinker) prev=xlinker continue ;; -XCClinker) prev=xcclinker continue ;; # Some other compiler flag. -* | +*) # Unknown arguments in both finalize_command and compile_command need # to be aesthetically quoted because they are evaled later. arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac ;; *.$objext) # A standard object. objs="$objs $arg" ;; *.lo) # A libtool-controlled object. # Check to see that this really is a libtool object. if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then pic_object= non_pic_object= # Read the .lo file # If there is no directory component, then add one. case $arg in */* | *\\*) . $arg ;; *) . ./$arg ;; esac if test -z "$pic_object" || \ test -z "$non_pic_object" || test "$pic_object" = none && \ test "$non_pic_object" = none; then $echo "$modename: cannot find name of object for \`$arg'" 1>&2 exit $EXIT_FAILURE fi # Extract subdirectory from the argument. xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` if test "X$xdir" = "X$arg"; then xdir= else xdir="$xdir/" fi if test "$pic_object" != none; then # Prepend the subdirectory the object is found in. pic_object="$xdir$pic_object" if test "$prev" = dlfiles; then if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then dlfiles="$dlfiles $pic_object" prev= continue else # If libtool objects are unsupported, then we need to preload. prev=dlprefiles fi fi # CHECK ME: I think I busted this. -Ossama if test "$prev" = dlprefiles; then # Preload the old-style object. dlprefiles="$dlprefiles $pic_object" prev= fi # A PIC object. libobjs="$libobjs $pic_object" arg="$pic_object" fi # Non-PIC object. if test "$non_pic_object" != none; then # Prepend the subdirectory the object is found in. non_pic_object="$xdir$non_pic_object" # A standard non-PIC object non_pic_objects="$non_pic_objects $non_pic_object" if test -z "$pic_object" || test "$pic_object" = none ; then arg="$non_pic_object" fi else # If the PIC object exists, use it instead. # $xdir was prepended to $pic_object above. non_pic_object="$pic_object" non_pic_objects="$non_pic_objects $non_pic_object" fi else # Only an error if not doing a dry-run. if test -z "$run"; then $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 exit $EXIT_FAILURE else # Dry-run case. # Extract subdirectory from the argument. xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` if test "X$xdir" = "X$arg"; then xdir= else xdir="$xdir/" fi pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` libobjs="$libobjs $pic_object" non_pic_objects="$non_pic_objects $non_pic_object" fi fi ;; *.$libext) # An archive. deplibs="$deplibs $arg" old_deplibs="$old_deplibs $arg" continue ;; *.la) # A libtool-controlled library. if test "$prev" = dlfiles; then # This library was specified with -dlopen. dlfiles="$dlfiles $arg" prev= elif test "$prev" = dlprefiles; then # The library was specified with -dlpreopen. dlprefiles="$dlprefiles $arg" prev= else deplibs="$deplibs $arg" fi continue ;; # Some other compiler argument. *) # Unknown arguments in both finalize_command and compile_command need # to be aesthetically quoted because they are evaled later. arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac ;; esac # arg # Now actually substitute the argument into the commands. if test -n "$arg"; then compile_command="$compile_command $arg" finalize_command="$finalize_command $arg" fi done # argument parsing loop if test -n "$prev"; then $echo "$modename: the \`$prevarg' option requires an argument" 1>&2 $echo "$help" 1>&2 exit $EXIT_FAILURE fi if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then eval arg=\"$export_dynamic_flag_spec\" compile_command="$compile_command $arg" finalize_command="$finalize_command $arg" fi oldlibs= # calculate the name of the file, without its directory outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'` libobjs_save="$libobjs" if test -n "$shlibpath_var"; then # get the directories listed in $shlibpath_var eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` else shlib_search_path= fi eval sys_lib_search_path=\"$sys_lib_search_path_spec\" eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'` if test "X$output_objdir" = "X$output"; then output_objdir="$objdir" else output_objdir="$output_objdir/$objdir" fi # Create the object directory. if test ! -d "$output_objdir"; then $show "$mkdir $output_objdir" $run $mkdir $output_objdir exit_status=$? if test "$exit_status" -ne 0 && test ! -d "$output_objdir"; then exit $exit_status fi fi # Determine the type of output case $output in "") $echo "$modename: you must specify an output file" 1>&2 $echo "$help" 1>&2 exit $EXIT_FAILURE ;; *.$libext) linkmode=oldlib ;; *.lo | *.$objext) linkmode=obj ;; *.la) linkmode=lib ;; *) linkmode=prog ;; # Anything else should be a program. esac case $host in *cygwin* | *mingw* | *pw32*) # don't eliminate duplications in $postdeps and $predeps duplicate_compiler_generated_deps=yes ;; *) duplicate_compiler_generated_deps=$duplicate_deps ;; esac specialdeplibs= libs= # Find all interdependent deplibs by searching for libraries # that are linked more than once (e.g. -la -lb -la) for deplib in $deplibs; do if test "X$duplicate_deps" = "Xyes" ; then case "$libs " in *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac fi libs="$libs $deplib" done if test "$linkmode" = lib; then libs="$predeps $libs $compiler_lib_search_path $postdeps" # Compute libraries that are listed more than once in $predeps # $postdeps and mark them as special (i.e., whose duplicates are # not to be eliminated). pre_post_deps= if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then for pre_post_dep in $predeps $postdeps; do case "$pre_post_deps " in *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; esac pre_post_deps="$pre_post_deps $pre_post_dep" done fi pre_post_deps= fi deplibs= newdependency_libs= newlib_search_path= need_relink=no # whether we're linking any uninstalled libtool libraries notinst_deplibs= # not-installed libtool libraries case $linkmode in lib) passes="conv link" for file in $dlfiles $dlprefiles; do case $file in *.la) ;; *) $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2 exit $EXIT_FAILURE ;; esac done ;; prog) compile_deplibs= finalize_deplibs= alldeplibs=no newdlfiles= newdlprefiles= passes="conv scan dlopen dlpreopen link" ;; *) passes="conv" ;; esac for pass in $passes; do if test "$linkmode,$pass" = "lib,link" || test "$linkmode,$pass" = "prog,scan"; then libs="$deplibs" deplibs= fi if test "$linkmode" = prog; then case $pass in dlopen) libs="$dlfiles" ;; dlpreopen) libs="$dlprefiles" ;; link) libs="$deplibs %DEPLIBS%" test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs" ;; esac fi if test "$pass" = dlopen; then # Collect dlpreopened libraries save_deplibs="$deplibs" deplibs= fi for deplib in $libs; do lib= found=no case $deplib in -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else compiler_flags="$compiler_flags $deplib" fi continue ;; -l*) if test "$linkmode" != lib && test "$linkmode" != prog; then $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2 continue fi name=`$echo "X$deplib" | $Xsed -e 's/^-l//'` if test "$linkmode" = lib; then searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path" else searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path" fi for searchdir in $searchdirs; do for search_ext in .la $std_shrext .so .a; do # Search the libtool library lib="$searchdir/lib${name}${search_ext}" if test -f "$lib"; then if test "$search_ext" = ".la"; then found=yes else found=no fi break 2 fi done done if test "$found" != yes; then # deplib doesn't seem to be a libtool library if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else deplibs="$deplib $deplibs" test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" fi continue else # deplib is a libtool library # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, # We need to do some special things here, and not later. if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $deplib "*) if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then library_names= old_library= case $lib in */* | *\\*) . $lib ;; *) . ./$lib ;; esac for l in $old_library $library_names; do ll="$l" done if test "X$ll" = "X$old_library" ; then # only static version available found=no ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` test "X$ladir" = "X$lib" && ladir="." lib=$ladir/$old_library if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else deplibs="$deplib $deplibs" test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" fi continue fi fi ;; *) ;; esac fi fi ;; # -l -L*) case $linkmode in lib) deplibs="$deplib $deplibs" test "$pass" = conv && continue newdependency_libs="$deplib $newdependency_libs" newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` ;; prog) if test "$pass" = conv; then deplibs="$deplib $deplibs" continue fi if test "$pass" = scan; then deplibs="$deplib $deplibs" else compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" fi newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` ;; *) $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2 ;; esac # linkmode continue ;; # -L -R*) if test "$pass" = link; then dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'` # Make sure the xrpath contains only unique directories. case "$xrpath " in *" $dir "*) ;; *) xrpath="$xrpath $dir" ;; esac fi deplibs="$deplib $deplibs" continue ;; *.la) lib="$deplib" ;; *.$libext) if test "$pass" = conv; then deplibs="$deplib $deplibs" continue fi case $linkmode in lib) valid_a_lib=no case $deplibs_check_method in match_pattern*) set dummy $deplibs_check_method match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` if eval $echo \"$deplib\" 2>/dev/null \ | $SED 10q \ | $EGREP "$match_pattern_regex" > /dev/null; then valid_a_lib=yes fi ;; pass_all) valid_a_lib=yes ;; esac if test "$valid_a_lib" != yes; then $echo $echo "*** Warning: Trying to link with static lib archive $deplib." $echo "*** I have the capability to make that library automatically link in when" $echo "*** you link to this library. But I can only do this if you have a" $echo "*** shared version of the library, which you do not appear to have" $echo "*** because the file extensions .$libext of this argument makes me believe" $echo "*** that it is just a static archive that I should not used here." else $echo $echo "*** Warning: Linking the shared library $output against the" $echo "*** static library $deplib is not portable!" deplibs="$deplib $deplibs" fi continue ;; prog) if test "$pass" != link; then deplibs="$deplib $deplibs" else compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" fi continue ;; esac # linkmode ;; # *.$libext *.lo | *.$objext) if test "$pass" = conv; then deplibs="$deplib $deplibs" elif test "$linkmode" = prog; then if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then # If there is no dlopen support or we're linking statically, # we need to preload. newdlprefiles="$newdlprefiles $deplib" compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else newdlfiles="$newdlfiles $deplib" fi fi continue ;; %DEPLIBS%) alldeplibs=yes continue ;; esac # case $deplib if test "$found" = yes || test -f "$lib"; then : else $echo "$modename: cannot find the library \`$lib' or unhandled argument \`$deplib'" 1>&2 exit $EXIT_FAILURE fi # Check to see that this really is a libtool archive. if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : else $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 exit $EXIT_FAILURE fi ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` test "X$ladir" = "X$lib" && ladir="." dlname= dlopen= dlpreopen= libdir= library_names= old_library= # If the library was installed with an old release of libtool, # it will not redefine variables installed, or shouldnotlink installed=yes shouldnotlink=no avoidtemprpath= # Read the .la file case $lib in */* | *\\*) . $lib ;; *) . ./$lib ;; esac if test "$linkmode,$pass" = "lib,link" || test "$linkmode,$pass" = "prog,scan" || { test "$linkmode" != prog && test "$linkmode" != lib; }; then test -n "$dlopen" && dlfiles="$dlfiles $dlopen" test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" fi if test "$pass" = conv; then # Only check for convenience libraries deplibs="$lib $deplibs" if test -z "$libdir"; then if test -z "$old_library"; then $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 exit $EXIT_FAILURE fi # It is a libtool convenience library, so add in its objects. convenience="$convenience $ladir/$objdir/$old_library" old_convenience="$old_convenience $ladir/$objdir/$old_library" tmp_libs= for deplib in $dependency_libs; do deplibs="$deplib $deplibs" if test "X$duplicate_deps" = "Xyes" ; then case "$tmp_libs " in *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac fi tmp_libs="$tmp_libs $deplib" done elif test "$linkmode" != prog && test "$linkmode" != lib; then $echo "$modename: \`$lib' is not a convenience library" 1>&2 exit $EXIT_FAILURE fi continue fi # $pass = conv # Get the name of the library we link against. linklib= for l in $old_library $library_names; do linklib="$l" done if test -z "$linklib"; then $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 exit $EXIT_FAILURE fi # This library was specified with -dlopen. if test "$pass" = dlopen; then if test -z "$libdir"; then $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2 exit $EXIT_FAILURE fi if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then # If there is no dlname, no dlopen support or we're linking # statically, we need to preload. We also need to preload any # dependent libraries so libltdl's deplib preloader doesn't # bomb out in the load deplibs phase. dlprefiles="$dlprefiles $lib $dependency_libs" else newdlfiles="$newdlfiles $lib" fi continue fi # $pass = dlopen # We need an absolute path. case $ladir in [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; *) abs_ladir=`cd "$ladir" && pwd` if test -z "$abs_ladir"; then $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2 $echo "$modename: passing it literally to the linker, although it might fail" 1>&2 abs_ladir="$ladir" fi ;; esac laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` # Find the relevant object directory and library name. if test "X$installed" = Xyes; then if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then $echo "$modename: warning: library \`$lib' was moved." 1>&2 dir="$ladir" absdir="$abs_ladir" libdir="$abs_ladir" else dir="$libdir" absdir="$libdir" fi test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes else if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then dir="$ladir" absdir="$abs_ladir" # Remove this search path later notinst_path="$notinst_path $abs_ladir" else dir="$ladir/$objdir" absdir="$abs_ladir/$objdir" # Remove this search path later notinst_path="$notinst_path $abs_ladir" fi fi # $installed = yes name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` # This library was specified with -dlpreopen. if test "$pass" = dlpreopen; then if test -z "$libdir"; then $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2 exit $EXIT_FAILURE fi # Prefer using a static library (so that no silly _DYNAMIC symbols # are required to link). if test -n "$old_library"; then newdlprefiles="$newdlprefiles $dir/$old_library" # Otherwise, use the dlname, so that lt_dlopen finds it. elif test -n "$dlname"; then newdlprefiles="$newdlprefiles $dir/$dlname" else newdlprefiles="$newdlprefiles $dir/$linklib" fi fi # $pass = dlpreopen if test -z "$libdir"; then # Link the convenience library if test "$linkmode" = lib; then deplibs="$dir/$old_library $deplibs" elif test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$dir/$old_library $compile_deplibs" finalize_deplibs="$dir/$old_library $finalize_deplibs" else deplibs="$lib $deplibs" # used for prog,scan pass fi continue fi if test "$linkmode" = prog && test "$pass" != link; then newlib_search_path="$newlib_search_path $ladir" deplibs="$lib $deplibs" linkalldeplibs=no if test "$link_all_deplibs" != no || test -z "$library_names" || test "$build_libtool_libs" = no; then linkalldeplibs=yes fi tmp_libs= for deplib in $dependency_libs; do case $deplib in -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test esac # Need to link against all dependency_libs? if test "$linkalldeplibs" = yes; then deplibs="$deplib $deplibs" else # Need to hardcode shared library paths # or/and link against static libraries newdependency_libs="$deplib $newdependency_libs" fi if test "X$duplicate_deps" = "Xyes" ; then case "$tmp_libs " in *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac fi tmp_libs="$tmp_libs $deplib" done # for deplib continue fi # $linkmode = prog... if test "$linkmode,$pass" = "prog,link"; then if test -n "$library_names" && { { test "$prefer_static_libs" = no || test "$prefer_static_libs,$installed" = "built,yes"; } || test -z "$old_library"; }; then # We need to hardcode the library path if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then # Make sure the rpath contains only unique directories. case "$temp_rpath " in *" $dir "*) ;; *" $absdir "*) ;; *) temp_rpath="$temp_rpath $absdir" ;; esac fi # Hardcode the library path. # Skip directories that are in the system default run-time # search path. case " $sys_lib_dlsearch_path " in *" $absdir "*) ;; *) case "$compile_rpath " in *" $absdir "*) ;; *) compile_rpath="$compile_rpath $absdir" esac ;; esac case " $sys_lib_dlsearch_path " in *" $libdir "*) ;; *) case "$finalize_rpath " in *" $libdir "*) ;; *) finalize_rpath="$finalize_rpath $libdir" esac ;; esac fi # $linkmode,$pass = prog,link... if test "$alldeplibs" = yes && { test "$deplibs_check_method" = pass_all || { test "$build_libtool_libs" = yes && test -n "$library_names"; }; }; then # We only need to search for static libraries continue fi fi link_static=no # Whether the deplib will be linked statically use_static_libs=$prefer_static_libs if test "$use_static_libs" = built && test "$installed" = yes ; then use_static_libs=no fi if test -n "$library_names" && { test "$use_static_libs" = no || test -z "$old_library"; }; then if test "$installed" = no; then notinst_deplibs="$notinst_deplibs $lib" need_relink=yes fi # This is a shared library # Warn about portability, can't link against -module's on # some systems (darwin) if test "$shouldnotlink" = yes && test "$pass" = link ; then $echo if test "$linkmode" = prog; then $echo "*** Warning: Linking the executable $output against the loadable module" else $echo "*** Warning: Linking the shared library $output against the loadable module" fi $echo "*** $linklib is not portable!" fi if test "$linkmode" = lib && test "$hardcode_into_libs" = yes; then # Hardcode the library path. # Skip directories that are in the system default run-time # search path. case " $sys_lib_dlsearch_path " in *" $absdir "*) ;; *) case "$compile_rpath " in *" $absdir "*) ;; *) compile_rpath="$compile_rpath $absdir" esac ;; esac case " $sys_lib_dlsearch_path " in *" $libdir "*) ;; *) case "$finalize_rpath " in *" $libdir "*) ;; *) finalize_rpath="$finalize_rpath $libdir" esac ;; esac fi if test -n "$old_archive_from_expsyms_cmds"; then # figure out the soname set dummy $library_names realname="$2" shift; shift libname=`eval \\$echo \"$libname_spec\"` # use dlname if we got it. it's perfectly good, no? if test -n "$dlname"; then soname="$dlname" elif test -n "$soname_spec"; then # bleh windows case $host in *cygwin* | mingw*) major=`expr $current - $age` versuffix="-$major" ;; esac eval soname=\"$soname_spec\" else soname="$realname" fi # Make a new name for the extract_expsyms_cmds to use soroot="$soname" soname=`$echo $soroot | ${SED} -e 's/^.*\///'` newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a" # If the library has no export list, then create one now if test -f "$output_objdir/$soname-def"; then : else $show "extracting exported symbol list from \`$soname'" save_ifs="$IFS"; IFS='~' cmds=$extract_expsyms_cmds for cmd in $cmds; do IFS="$save_ifs" eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" fi # Create $newlib if test -f "$output_objdir/$newlib"; then :; else $show "generating import library for \`$soname'" save_ifs="$IFS"; IFS='~' cmds=$old_archive_from_expsyms_cmds for cmd in $cmds; do IFS="$save_ifs" eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" fi # make sure the library variables are pointing to the new library dir=$output_objdir linklib=$newlib fi # test -n "$old_archive_from_expsyms_cmds" if test "$linkmode" = prog || test "$mode" != relink; then add_shlibpath= add_dir= add= lib_linked=yes case $hardcode_action in immediate | unsupported) if test "$hardcode_direct" = no; then add="$dir/$linklib" case $host in *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; *-*-sysv4*uw2*) add_dir="-L$dir" ;; *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ *-*-unixware7*) add_dir="-L$dir" ;; *-*-darwin* ) # if the lib is a module then we can not link against # it, someone is ignoring the new warnings I added if /usr/bin/file -L $add 2> /dev/null | $EGREP ": [^:]* bundle" >/dev/null ; then $echo "** Warning, lib $linklib is a module, not a shared library" if test -z "$old_library" ; then $echo $echo "** And there doesn't seem to be a static archive available" $echo "** The link will probably fail, sorry" else add="$dir/$old_library" fi fi esac elif test "$hardcode_minus_L" = no; then case $host in *-*-sunos*) add_shlibpath="$dir" ;; esac add_dir="-L$dir" add="-l$name" elif test "$hardcode_shlibpath_var" = no; then add_shlibpath="$dir" add="-l$name" else lib_linked=no fi ;; relink) if test "$hardcode_direct" = yes; then add="$dir/$linklib" elif test "$hardcode_minus_L" = yes; then add_dir="-L$dir" # Try looking first in the location we're being installed to. if test -n "$inst_prefix_dir"; then case $libdir in [\\/]*) add_dir="$add_dir -L$inst_prefix_dir$libdir" ;; esac fi add="-l$name" elif test "$hardcode_shlibpath_var" = yes; then add_shlibpath="$dir" add="-l$name" else lib_linked=no fi ;; *) lib_linked=no ;; esac if test "$lib_linked" != yes; then $echo "$modename: configuration error: unsupported hardcode properties" exit $EXIT_FAILURE fi if test -n "$add_shlibpath"; then case :$compile_shlibpath: in *":$add_shlibpath:"*) ;; *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; esac fi if test "$linkmode" = prog; then test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" test -n "$add" && compile_deplibs="$add $compile_deplibs" else test -n "$add_dir" && deplibs="$add_dir $deplibs" test -n "$add" && deplibs="$add $deplibs" if test "$hardcode_direct" != yes && \ test "$hardcode_minus_L" != yes && \ test "$hardcode_shlibpath_var" = yes; then case :$finalize_shlibpath: in *":$libdir:"*) ;; *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; esac fi fi fi if test "$linkmode" = prog || test "$mode" = relink; then add_shlibpath= add_dir= add= # Finalize command for both is simple: just hardcode it. if test "$hardcode_direct" = yes; then add="$libdir/$linklib" elif test "$hardcode_minus_L" = yes; then add_dir="-L$libdir" add="-l$name" elif test "$hardcode_shlibpath_var" = yes; then case :$finalize_shlibpath: in *":$libdir:"*) ;; *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; esac add="-l$name" elif test "$hardcode_automatic" = yes; then if test -n "$inst_prefix_dir" && test -f "$inst_prefix_dir$libdir/$linklib" ; then add="$inst_prefix_dir$libdir/$linklib" else add="$libdir/$linklib" fi else # We cannot seem to hardcode it, guess we'll fake it. add_dir="-L$libdir" # Try looking first in the location we're being installed to. if test -n "$inst_prefix_dir"; then case $libdir in [\\/]*) add_dir="$add_dir -L$inst_prefix_dir$libdir" ;; esac fi add="-l$name" fi if test "$linkmode" = prog; then test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" test -n "$add" && finalize_deplibs="$add $finalize_deplibs" else test -n "$add_dir" && deplibs="$add_dir $deplibs" test -n "$add" && deplibs="$add $deplibs" fi fi elif test "$linkmode" = prog; then # Here we assume that one of hardcode_direct or hardcode_minus_L # is not unsupported. This is valid on all known static and # shared platforms. if test "$hardcode_direct" != unsupported; then test -n "$old_library" && linklib="$old_library" compile_deplibs="$dir/$linklib $compile_deplibs" finalize_deplibs="$dir/$linklib $finalize_deplibs" else compile_deplibs="-l$name -L$dir $compile_deplibs" finalize_deplibs="-l$name -L$dir $finalize_deplibs" fi elif test "$build_libtool_libs" = yes; then # Not a shared library if test "$deplibs_check_method" != pass_all; then # We're trying link a shared library against a static one # but the system doesn't support it. # Just print a warning and add the library to dependency_libs so # that the program can be linked against the static library. $echo $echo "*** Warning: This system can not link to static lib archive $lib." $echo "*** I have the capability to make that library automatically link in when" $echo "*** you link to this library. But I can only do this if you have a" $echo "*** shared version of the library, which you do not appear to have." if test "$module" = yes; then $echo "*** But as you try to build a module library, libtool will still create " $echo "*** a static module, that should work as long as the dlopening application" $echo "*** is linked with the -dlopen flag to resolve symbols at runtime." if test -z "$global_symbol_pipe"; then $echo $echo "*** However, this would only work if libtool was able to extract symbol" $echo "*** lists from a program, using \`nm' or equivalent, but libtool could" $echo "*** not find such a program. So, this module is probably useless." $echo "*** \`nm' from GNU binutils and a full rebuild may help." fi if test "$build_old_libs" = no; then build_libtool_libs=module build_old_libs=yes else build_libtool_libs=no fi fi else deplibs="$dir/$old_library $deplibs" link_static=yes fi fi # link shared/static library? if test "$linkmode" = lib; then if test -n "$dependency_libs" && { test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes || test "$link_static" = yes; }; then # Extract -R from dependency_libs temp_deplibs= for libdir in $dependency_libs; do case $libdir in -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'` case " $xrpath " in *" $temp_xrpath "*) ;; *) xrpath="$xrpath $temp_xrpath";; esac;; *) temp_deplibs="$temp_deplibs $libdir";; esac done dependency_libs="$temp_deplibs" fi newlib_search_path="$newlib_search_path $absdir" # Link against this library test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" # ... and its dependency_libs tmp_libs= for deplib in $dependency_libs; do newdependency_libs="$deplib $newdependency_libs" if test "X$duplicate_deps" = "Xyes" ; then case "$tmp_libs " in *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac fi tmp_libs="$tmp_libs $deplib" done if test "$link_all_deplibs" != no; then # Add the search paths of all dependency libraries for deplib in $dependency_libs; do case $deplib in -L*) path="$deplib" ;; *.la) dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'` test "X$dir" = "X$deplib" && dir="." # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; *) absdir=`cd "$dir" && pwd` if test -z "$absdir"; then $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2 absdir="$dir" fi ;; esac if grep "^installed=no" $deplib > /dev/null; then path="$absdir/$objdir" else eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` if test -z "$libdir"; then $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 exit $EXIT_FAILURE fi if test "$absdir" != "$libdir"; then $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2 fi path="$absdir" fi depdepl= case $host in *-*-darwin*) # we do not want to link against static libs, # but need to link against shared eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` eval deplibdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` if test -n "$deplibrary_names" ; then for tmp in $deplibrary_names ; do depdepl=$tmp done if test -f "$deplibdir/$depdepl" ; then depdepl="$deplibdir/$depdepl" elif test -f "$path/$depdepl" ; then depdepl="$path/$depdepl" else # Can't find it, oh well... depdepl= fi # do not add paths which are already there case " $newlib_search_path " in *" $path "*) ;; *) newlib_search_path="$newlib_search_path $path";; esac fi path="" ;; *) path="-L$path" ;; esac ;; -l*) case $host in *-*-darwin*) # Again, we only want to link against shared libraries eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"` for tmp in $newlib_search_path ; do if test -f "$tmp/lib$tmp_libs.dylib" ; then eval depdepl="$tmp/lib$tmp_libs.dylib" break fi done path="" ;; *) continue ;; esac ;; *) continue ;; esac case " $deplibs " in *" $path "*) ;; *) deplibs="$path $deplibs" ;; esac case " $deplibs " in *" $depdepl "*) ;; *) deplibs="$depdepl $deplibs" ;; esac done fi # link_all_deplibs != no fi # linkmode = lib done # for deplib in $libs dependency_libs="$newdependency_libs" if test "$pass" = dlpreopen; then # Link the dlpreopened libraries before other libraries for deplib in $save_deplibs; do deplibs="$deplib $deplibs" done fi if test "$pass" != dlopen; then if test "$pass" != conv; then # Make sure lib_search_path contains only unique directories. lib_search_path= for dir in $newlib_search_path; do case "$lib_search_path " in *" $dir "*) ;; *) lib_search_path="$lib_search_path $dir" ;; esac done newlib_search_path= fi if test "$linkmode,$pass" != "prog,link"; then vars="deplibs" else vars="compile_deplibs finalize_deplibs" fi for var in $vars dependency_libs; do # Add libraries to $var in reverse order eval tmp_libs=\"\$$var\" new_libs= for deplib in $tmp_libs; do # FIXME: Pedantically, this is the right thing to do, so # that some nasty dependency loop isn't accidentally # broken: #new_libs="$deplib $new_libs" # Pragmatically, this seems to cause very few problems in # practice: case $deplib in -L*) new_libs="$deplib $new_libs" ;; -R*) ;; *) # And here is the reason: when a library appears more # than once as an explicit dependence of a library, or # is implicitly linked in more than once by the # compiler, it is considered special, and multiple # occurrences thereof are not removed. Compare this # with having the same library being listed as a # dependency of multiple other libraries: in this case, # we know (pedantically, we assume) the library does not # need to be listed more than once, so we keep only the # last copy. This is not always right, but it is rare # enough that we require users that really mean to play # such unportable linking tricks to link the library # using -Wl,-lname, so that libtool does not consider it # for duplicate removal. case " $specialdeplibs " in *" $deplib "*) new_libs="$deplib $new_libs" ;; *) case " $new_libs " in *" $deplib "*) ;; *) new_libs="$deplib $new_libs" ;; esac ;; esac ;; esac done tmp_libs= for deplib in $new_libs; do case $deplib in -L*) case " $tmp_libs " in *" $deplib "*) ;; *) tmp_libs="$tmp_libs $deplib" ;; esac ;; *) tmp_libs="$tmp_libs $deplib" ;; esac done eval $var=\"$tmp_libs\" done # for var fi # Last step: remove runtime libs from dependency_libs # (they stay in deplibs) tmp_libs= for i in $dependency_libs ; do case " $predeps $postdeps $compiler_lib_search_path " in *" $i "*) i="" ;; esac if test -n "$i" ; then tmp_libs="$tmp_libs $i" fi done dependency_libs=$tmp_libs done # for pass if test "$linkmode" = prog; then dlfiles="$newdlfiles" dlprefiles="$newdlprefiles" fi case $linkmode in oldlib) case " $deplibs" in *\ -l* | *\ -L*) $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2 ;; esac if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2 fi if test -n "$rpath"; then $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2 fi if test -n "$xrpath"; then $echo "$modename: warning: \`-R' is ignored for archives" 1>&2 fi if test -n "$vinfo"; then $echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2 fi if test -n "$release"; then $echo "$modename: warning: \`-release' is ignored for archives" 1>&2 fi if test -n "$export_symbols" || test -n "$export_symbols_regex"; then $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2 fi # Now set the variables for building old libraries. build_libtool_libs=no oldlibs="$output" objs="$objs$old_deplibs" ;; lib) # Make sure we only generate libraries of the form `libNAME.la'. case $outputname in lib*) name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` eval shared_ext=\"$shrext_cmds\" eval libname=\"$libname_spec\" ;; *) if test "$module" = no; then $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2 $echo "$help" 1>&2 exit $EXIT_FAILURE fi if test "$need_lib_prefix" != no; then # Add the "lib" prefix for modules if required name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` eval shared_ext=\"$shrext_cmds\" eval libname=\"$libname_spec\" else libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` fi ;; esac if test -n "$objs"; then if test "$deplibs_check_method" != pass_all; then $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1 exit $EXIT_FAILURE else $echo $echo "*** Warning: Linking the shared library $output against the non-libtool" $echo "*** objects $objs is not portable!" libobjs="$libobjs $objs" fi fi if test "$dlself" != no; then $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2 fi set dummy $rpath if test "$#" -gt 2; then $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2 fi install_libdir="$2" oldlibs= if test -z "$rpath"; then if test "$build_libtool_libs" = yes; then # Building a libtool convenience library. # Some compilers have problems with a `.al' extension so # convenience libraries should have the same extension an # archive normally would. oldlibs="$output_objdir/$libname.$libext $oldlibs" build_libtool_libs=convenience build_old_libs=yes fi if test -n "$vinfo"; then $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2 fi if test -n "$release"; then $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2 fi else # Parse the version information argument. save_ifs="$IFS"; IFS=':' set dummy $vinfo 0 0 0 IFS="$save_ifs" if test -n "$8"; then $echo "$modename: too many parameters to \`-version-info'" 1>&2 $echo "$help" 1>&2 exit $EXIT_FAILURE fi # convert absolute version numbers to libtool ages # this retains compatibility with .la files and attempts # to make the code below a bit more comprehensible case $vinfo_number in yes) number_major="$2" number_minor="$3" number_revision="$4" # # There are really only two kinds -- those that # use the current revision as the major version # and those that subtract age and use age as # a minor version. But, then there is irix # which has an extra 1 added just for fun # case $version_type in darwin|linux|osf|windows|none) current=`expr $number_major + $number_minor` age="$number_minor" revision="$number_revision" ;; freebsd-aout|freebsd-elf|sunos) current="$number_major" revision="$number_minor" age="0" ;; irix|nonstopux) current=`expr $number_major + $number_minor` age="$number_minor" revision="$number_minor" lt_irix_increment=no ;; *) $echo "$modename: unknown library version type \`$version_type'" 1>&2 $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 exit $EXIT_FAILURE ;; esac ;; no) current="$2" revision="$3" age="$4" ;; esac # Check that each of the things are valid numbers. case $current in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) $echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 exit $EXIT_FAILURE ;; esac case $revision in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 exit $EXIT_FAILURE ;; esac case $age in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 exit $EXIT_FAILURE ;; esac if test "$age" -gt "$current"; then $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 exit $EXIT_FAILURE fi # Calculate the version variables. major= versuffix= verstring= case $version_type in none) ;; darwin) # Like Linux, but with the current version available in # verstring for coding it into the library header major=.`expr $current - $age` versuffix="$major.$age.$revision" # Darwin ld doesn't like 0 for these options... minor_current=`expr $current + 1` xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" ;; freebsd-aout) major=".$current" versuffix=".$current.$revision"; ;; freebsd-elf) major=".$current" versuffix=".$current"; ;; irix | nonstopux) if test "X$lt_irix_increment" = "Xno"; then major=`expr $current - $age` else major=`expr $current - $age + 1` fi case $version_type in nonstopux) verstring_prefix=nonstopux ;; *) verstring_prefix=sgi ;; esac verstring="$verstring_prefix$major.$revision" # Add in all the interfaces that we are compatible with. loop=$revision while test "$loop" -ne 0; do iface=`expr $revision - $loop` loop=`expr $loop - 1` verstring="$verstring_prefix$major.$iface:$verstring" done # Before this point, $major must not contain `.'. major=.$major versuffix="$major.$revision" ;; linux) major=.`expr $current - $age` versuffix="$major.$age.$revision" ;; osf) major=.`expr $current - $age` versuffix=".$current.$age.$revision" verstring="$current.$age.$revision" # Add in all the interfaces that we are compatible with. loop=$age while test "$loop" -ne 0; do iface=`expr $current - $loop` loop=`expr $loop - 1` verstring="$verstring:${iface}.0" done # Make executables depend on our current version. verstring="$verstring:${current}.0" ;; sunos) major=".$current" versuffix=".$current.$revision" ;; windows) # Use '-' rather than '.', since we only want one # extension on DOS 8.3 filesystems. major=`expr $current - $age` versuffix="-$major" ;; *) $echo "$modename: unknown library version type \`$version_type'" 1>&2 $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 exit $EXIT_FAILURE ;; esac # Clear the version info if we defaulted, and they specified a release. if test -z "$vinfo" && test -n "$release"; then major= case $version_type in darwin) # we can't check for "0.0" in archive_cmds due to quoting # problems, so we reset it completely verstring= ;; *) verstring="0.0" ;; esac if test "$need_version" = no; then versuffix= else versuffix=".0.0" fi fi # Remove version info from name if versioning should be avoided if test "$avoid_version" = yes && test "$need_version" = no; then major= versuffix= verstring="" fi # Check to see if the archive will have undefined symbols. if test "$allow_undefined" = yes; then if test "$allow_undefined_flag" = unsupported; then $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2 build_libtool_libs=no build_old_libs=yes fi else # Don't allow undefined symbols. allow_undefined_flag="$no_undefined_flag" fi fi if test "$mode" != relink; then # Remove our outputs, but don't remove object files since they # may have been created when compiling PIC objects. removelist= tempremovelist=`$echo "$output_objdir/*"` for p in $tempremovelist; do case $p in *.$objext) ;; $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) if test "X$precious_files_regex" != "X"; then if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 then continue fi fi removelist="$removelist $p" ;; *) ;; esac done if test -n "$removelist"; then $show "${rm}r $removelist" $run ${rm}r $removelist fi fi # Now set the variables for building old libraries. if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then oldlibs="$oldlibs $output_objdir/$libname.$libext" # Transform .lo files to .o files. oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` fi # Eliminate all temporary directories. #for path in $notinst_path; do # lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"` # deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"` # dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"` #done if test -n "$xrpath"; then # If the user specified any rpath flags, then add them. temp_xrpath= for libdir in $xrpath; do temp_xrpath="$temp_xrpath -R$libdir" case "$finalize_rpath " in *" $libdir "*) ;; *) finalize_rpath="$finalize_rpath $libdir" ;; esac done if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then dependency_libs="$temp_xrpath $dependency_libs" fi fi # Make sure dlfiles contains only unique files that won't be dlpreopened old_dlfiles="$dlfiles" dlfiles= for lib in $old_dlfiles; do case " $dlprefiles $dlfiles " in *" $lib "*) ;; *) dlfiles="$dlfiles $lib" ;; esac done # Make sure dlprefiles contains only unique files old_dlprefiles="$dlprefiles" dlprefiles= for lib in $old_dlprefiles; do case "$dlprefiles " in *" $lib "*) ;; *) dlprefiles="$dlprefiles $lib" ;; esac done if test "$build_libtool_libs" = yes; then if test -n "$rpath"; then case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*) # these systems don't actually have a c library (as such)! ;; *-*-rhapsody* | *-*-darwin1.[012]) # Rhapsody C library is in the System framework deplibs="$deplibs -framework System" ;; *-*-netbsd*) # Don't link with libc until the a.out ld.so is fixed. ;; *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) # Do not include libc due to us having libc/libc_r. ;; *-*-sco3.2v5* | *-*-sco5v6*) # Causes problems with __ctype ;; *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) # Compiler inserts libc in the correct place for threads to work ;; *) # Add libc to deplibs on all other systems if necessary. if test "$build_libtool_need_lc" = "yes"; then deplibs="$deplibs -lc" fi ;; esac fi # Transform deplibs into only deplibs that can be linked in shared. name_save=$name libname_save=$libname release_save=$release versuffix_save=$versuffix major_save=$major # I'm not sure if I'm treating the release correctly. I think # release should show up in the -l (ie -lgmp5) so we don't want to # add it in twice. Is that correct? release="" versuffix="" major="" newdeplibs= droppeddeps=no case $deplibs_check_method in pass_all) # Don't check for shared/static. Everything works. # This might be a little naive. We might want to check # whether the library exists or not. But this is on # osf3 & osf4 and I'm not really sure... Just # implementing what was already the behavior. newdeplibs=$deplibs ;; test_compile) # This code stresses the "libraries are programs" paradigm to its # limits. Maybe even breaks it. We compile a program, linking it # against the deplibs as a proxy for the library. Then we can check # whether they linked in statically or dynamically with ldd. $rm conftest.c cat > conftest.c </dev/null` for potent_lib in $potential_libs; do # Follow soft links. if ls -lLd "$potent_lib" 2>/dev/null \ | grep " -> " >/dev/null; then continue fi # The statement above tries to avoid entering an # endless loop below, in case of cyclic links. # We might still enter an endless loop, since a link # loop can be closed while we follow links, # but so what? potlib="$potent_lib" while test -h "$potlib" 2>/dev/null; do potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` case $potliblink in [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; esac done if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \ | ${SED} 10q \ | $EGREP "$file_magic_regex" > /dev/null; then newdeplibs="$newdeplibs $a_deplib" a_deplib="" break 2 fi done done fi if test -n "$a_deplib" ; then droppeddeps=yes $echo $echo "*** Warning: linker path does not have real file for library $a_deplib." $echo "*** I have the capability to make that library automatically link in when" $echo "*** you link to this library. But I can only do this if you have a" $echo "*** shared version of the library, which you do not appear to have" $echo "*** because I did check the linker path looking for a file starting" if test -z "$potlib" ; then $echo "*** with $libname but no candidates were found. (...for file magic test)" else $echo "*** with $libname and none of the candidates passed a file format test" $echo "*** using a file magic. Last file checked: $potlib" fi fi else # Add a -L argument. newdeplibs="$newdeplibs $a_deplib" fi done # Gone through all deplibs. ;; match_pattern*) set dummy $deplibs_check_method match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` for a_deplib in $deplibs; do name=`expr $a_deplib : '-l\(.*\)'` # If $name is empty we are operating on a -L argument. if test -n "$name" && test "$name" != "0"; then if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $a_deplib "*) newdeplibs="$newdeplibs $a_deplib" a_deplib="" ;; esac fi if test -n "$a_deplib" ; then libname=`eval \\$echo \"$libname_spec\"` for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do potential_libs=`ls $i/$libname[.-]* 2>/dev/null` for potent_lib in $potential_libs; do potlib="$potent_lib" # see symlink-check above in file_magic test if eval $echo \"$potent_lib\" 2>/dev/null \ | ${SED} 10q \ | $EGREP "$match_pattern_regex" > /dev/null; then newdeplibs="$newdeplibs $a_deplib" a_deplib="" break 2 fi done done fi if test -n "$a_deplib" ; then droppeddeps=yes $echo $echo "*** Warning: linker path does not have real file for library $a_deplib." $echo "*** I have the capability to make that library automatically link in when" $echo "*** you link to this library. But I can only do this if you have a" $echo "*** shared version of the library, which you do not appear to have" $echo "*** because I did check the linker path looking for a file starting" if test -z "$potlib" ; then $echo "*** with $libname but no candidates were found. (...for regex pattern test)" else $echo "*** with $libname and none of the candidates passed a file format test" $echo "*** using a regex pattern. Last file checked: $potlib" fi fi else # Add a -L argument. newdeplibs="$newdeplibs $a_deplib" fi done # Gone through all deplibs. ;; none | unknown | *) newdeplibs="" tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \ -e 's/ -[LR][^ ]*//g'` if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then for i in $predeps $postdeps ; do # can't use Xsed below, because $i might contain '/' tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"` done fi if $echo "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' \ | grep . >/dev/null; then $echo if test "X$deplibs_check_method" = "Xnone"; then $echo "*** Warning: inter-library dependencies are not supported in this platform." else $echo "*** Warning: inter-library dependencies are not known to be supported." fi $echo "*** All declared inter-library dependencies are being dropped." droppeddeps=yes fi ;; esac versuffix=$versuffix_save major=$major_save release=$release_save libname=$libname_save name=$name_save case $host in *-*-rhapsody* | *-*-darwin1.[012]) # On Rhapsody replace the C library is the System framework newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'` ;; esac if test "$droppeddeps" = yes; then if test "$module" = yes; then $echo $echo "*** Warning: libtool could not satisfy all declared inter-library" $echo "*** dependencies of module $libname. Therefore, libtool will create" $echo "*** a static module, that should work as long as the dlopening" $echo "*** application is linked with the -dlopen flag." if test -z "$global_symbol_pipe"; then $echo $echo "*** However, this would only work if libtool was able to extract symbol" $echo "*** lists from a program, using \`nm' or equivalent, but libtool could" $echo "*** not find such a program. So, this module is probably useless." $echo "*** \`nm' from GNU binutils and a full rebuild may help." fi if test "$build_old_libs" = no; then oldlibs="$output_objdir/$libname.$libext" build_libtool_libs=module build_old_libs=yes else build_libtool_libs=no fi else $echo "*** The inter-library dependencies that have been dropped here will be" $echo "*** automatically added whenever a program is linked with this library" $echo "*** or is declared to -dlopen it." if test "$allow_undefined" = no; then $echo $echo "*** Since this library must not contain undefined symbols," $echo "*** because either the platform does not support them or" $echo "*** it was explicitly requested with -no-undefined," $echo "*** libtool will only create a static version of it." if test "$build_old_libs" = no; then oldlibs="$output_objdir/$libname.$libext" build_libtool_libs=module build_old_libs=yes else build_libtool_libs=no fi fi fi fi # Done checking deplibs! deplibs=$newdeplibs fi # move library search paths that coincide with paths to not yet # installed libraries to the beginning of the library search list new_libs= for path in $notinst_path; do case " $new_libs " in *" -L$path/$objdir "*) ;; *) case " $deplibs " in *" -L$path/$objdir "*) new_libs="$new_libs -L$path/$objdir" ;; esac ;; esac done for deplib in $deplibs; do case $deplib in -L*) case " $new_libs " in *" $deplib "*) ;; *) new_libs="$new_libs $deplib" ;; esac ;; *) new_libs="$new_libs $deplib" ;; esac done deplibs="$new_libs" # All the library-specific variables (install_libdir is set above). library_names= old_library= dlname= # Test again, we may have decided not to build it any more if test "$build_libtool_libs" = yes; then if test "$hardcode_into_libs" = yes; then # Hardcode the library paths hardcode_libdirs= dep_rpath= rpath="$finalize_rpath" test "$mode" != relink && rpath="$compile_rpath$rpath" for libdir in $rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then if test -z "$hardcode_libdirs"; then hardcode_libdirs="$libdir" else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" dep_rpath="$dep_rpath $flag" fi elif test -n "$runpath_var"; then case "$perm_rpath " in *" $libdir "*) ;; *) perm_rpath="$perm_rpath $libdir" ;; esac fi done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" if test -n "$hardcode_libdir_flag_spec_ld"; then case $archive_cmds in *\$LD*) eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" ;; *) eval dep_rpath=\"$hardcode_libdir_flag_spec\" ;; esac else eval dep_rpath=\"$hardcode_libdir_flag_spec\" fi fi if test -n "$runpath_var" && test -n "$perm_rpath"; then # We should set the runpath_var. rpath= for dir in $perm_rpath; do rpath="$rpath$dir:" done eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" fi test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" fi shlibpath="$finalize_shlibpath" test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" if test -n "$shlibpath"; then eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" fi # Get the real and link names of the library. eval shared_ext=\"$shrext_cmds\" eval library_names=\"$library_names_spec\" set dummy $library_names realname="$2" shift; shift if test -n "$soname_spec"; then eval soname=\"$soname_spec\" else soname="$realname" fi if test -z "$dlname"; then dlname=$soname fi lib="$output_objdir/$realname" linknames= for link do linknames="$linknames $link" done # Use standard objects if they are pic test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` # Prepare the list of exported symbols if test -z "$export_symbols"; then if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then $show "generating symbol list for \`$libname.la'" export_symbols="$output_objdir/$libname.exp" $run $rm $export_symbols cmds=$export_symbols_cmds save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" eval cmd=\"$cmd\" if len=`expr "X$cmd" : ".*"` && test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then $show "$cmd" $run eval "$cmd" || exit $? skipped_export=false else # The command line is too long to execute in one step. $show "using reloadable object file for export list..." skipped_export=: # Break out early, otherwise skipped_export may be # set to false by a later but shorter cmd. break fi done IFS="$save_ifs" if test -n "$export_symbols_regex"; then $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\"" $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' $show "$mv \"${export_symbols}T\" \"$export_symbols\"" $run eval '$mv "${export_symbols}T" "$export_symbols"' fi fi fi if test -n "$export_symbols" && test -n "$include_expsyms"; then $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"' fi tmp_deplibs= for test_deplib in $deplibs; do case " $convenience " in *" $test_deplib "*) ;; *) tmp_deplibs="$tmp_deplibs $test_deplib" ;; esac done deplibs="$tmp_deplibs" if test -n "$convenience"; then if test -n "$whole_archive_flag_spec"; then save_libobjs=$libobjs eval libobjs=\"\$libobjs $whole_archive_flag_spec\" else gentop="$output_objdir/${outputname}x" generated="$generated $gentop" func_extract_archives $gentop $convenience libobjs="$libobjs $func_extract_archives_result" fi fi if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then eval flag=\"$thread_safe_flag_spec\" linker_flags="$linker_flags $flag" fi # Make a backup of the uninstalled library when relinking if test "$mode" = relink; then $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $? fi # Do each of the archive commands. if test "$module" = yes && test -n "$module_cmds" ; then if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then eval test_cmds=\"$module_expsym_cmds\" cmds=$module_expsym_cmds else eval test_cmds=\"$module_cmds\" cmds=$module_cmds fi else if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then eval test_cmds=\"$archive_expsym_cmds\" cmds=$archive_expsym_cmds else eval test_cmds=\"$archive_cmds\" cmds=$archive_cmds fi fi if test "X$skipped_export" != "X:" && len=`expr "X$test_cmds" : ".*" 2>/dev/null` && test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then : else # The command line is too long to link in one step, link piecewise. $echo "creating reloadable object files..." # Save the value of $output and $libobjs because we want to # use them later. If we have whole_archive_flag_spec, we # want to use save_libobjs as it was before # whole_archive_flag_spec was expanded, because we can't # assume the linker understands whole_archive_flag_spec. # This may have to be revisited, in case too many # convenience libraries get linked in and end up exceeding # the spec. if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then save_libobjs=$libobjs fi save_output=$output output_la=`$echo "X$output" | $Xsed -e "$basename"` # Clear the reloadable object creation command queue and # initialize k to one. test_cmds= concat_cmds= objlist= delfiles= last_robj= k=1 output=$output_objdir/$output_la-${k}.$objext # Loop over the list of objects to be linked. for obj in $save_libobjs do eval test_cmds=\"$reload_cmds $objlist $last_robj\" if test "X$objlist" = X || { len=`expr "X$test_cmds" : ".*" 2>/dev/null` && test "$len" -le "$max_cmd_len"; }; then objlist="$objlist $obj" else # The command $test_cmds is almost too long, add a # command to the queue. if test "$k" -eq 1 ; then # The first file doesn't have a previous command to add. eval concat_cmds=\"$reload_cmds $objlist $last_robj\" else # All subsequent reloadable object files will link in # the last one created. eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\" fi last_robj=$output_objdir/$output_la-${k}.$objext k=`expr $k + 1` output=$output_objdir/$output_la-${k}.$objext objlist=$obj len=1 fi done # Handle the remaining objects by creating one last # reloadable object file. All subsequent reloadable object # files will link in the last one created. test -z "$concat_cmds" || concat_cmds=$concat_cmds~ eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" if ${skipped_export-false}; then $show "generating symbol list for \`$libname.la'" export_symbols="$output_objdir/$libname.exp" $run $rm $export_symbols libobjs=$output # Append the command to create the export file. eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\" fi # Set up a command to remove the reloadable object files # after they are used. i=0 while test "$i" -lt "$k" do i=`expr $i + 1` delfiles="$delfiles $output_objdir/$output_la-${i}.$objext" done $echo "creating a temporary reloadable object file: $output" # Loop through the commands generated above and execute them. save_ifs="$IFS"; IFS='~' for cmd in $concat_cmds; do IFS="$save_ifs" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" libobjs=$output # Restore the value of output. output=$save_output if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then eval libobjs=\"\$libobjs $whole_archive_flag_spec\" fi # Expand the library linking commands again to reset the # value of $libobjs for piecewise linking. # Do each of the archive commands. if test "$module" = yes && test -n "$module_cmds" ; then if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then cmds=$module_expsym_cmds else cmds=$module_cmds fi else if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then cmds=$archive_expsym_cmds else cmds=$archive_cmds fi fi # Append the command to remove the reloadable object files # to the just-reset $cmds. eval cmds=\"\$cmds~\$rm $delfiles\" fi save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" || { lt_exit=$? # Restore the uninstalled library and exit if test "$mode" = relink; then $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)' fi exit $lt_exit } done IFS="$save_ifs" # Restore the uninstalled library and exit if test "$mode" = relink; then $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $? if test -n "$convenience"; then if test -z "$whole_archive_flag_spec"; then $show "${rm}r $gentop" $run ${rm}r "$gentop" fi fi exit $EXIT_SUCCESS fi # Create links to the real library. for linkname in $linknames; do if test "$realname" != "$linkname"; then $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)" $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $? fi done # If -module or -export-dynamic was specified, set the dlname. if test "$module" = yes || test "$export_dynamic" = yes; then # On all known operating systems, these are identical. dlname="$soname" fi fi ;; obj) case " $deplibs" in *\ -l* | *\ -L*) $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2 ;; esac if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2 fi if test -n "$rpath"; then $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2 fi if test -n "$xrpath"; then $echo "$modename: warning: \`-R' is ignored for objects" 1>&2 fi if test -n "$vinfo"; then $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2 fi if test -n "$release"; then $echo "$modename: warning: \`-release' is ignored for objects" 1>&2 fi case $output in *.lo) if test -n "$objs$old_deplibs"; then $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2 exit $EXIT_FAILURE fi libobj="$output" obj=`$echo "X$output" | $Xsed -e "$lo2o"` ;; *) libobj= obj="$output" ;; esac # Delete the old objects. $run $rm $obj $libobj # Objects from convenience libraries. This assumes # single-version convenience libraries. Whenever we create # different ones for PIC/non-PIC, this we'll have to duplicate # the extraction. reload_conv_objs= gentop= # reload_cmds runs $LD directly, so let us get rid of # -Wl from whole_archive_flag_spec and hope we can get by with # turning comma into space.. wl= if test -n "$convenience"; then if test -n "$whole_archive_flag_spec"; then eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" reload_conv_objs=$reload_objs\ `$echo "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'` else gentop="$output_objdir/${obj}x" generated="$generated $gentop" func_extract_archives $gentop $convenience reload_conv_objs="$reload_objs $func_extract_archives_result" fi fi # Create the old-style object. reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test output="$obj" cmds=$reload_cmds save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" # Exit if we aren't doing a library object file. if test -z "$libobj"; then if test -n "$gentop"; then $show "${rm}r $gentop" $run ${rm}r $gentop fi exit $EXIT_SUCCESS fi if test "$build_libtool_libs" != yes; then if test -n "$gentop"; then $show "${rm}r $gentop" $run ${rm}r $gentop fi # Create an invalid libtool object if no PIC, so that we don't # accidentally link it into a program. # $show "echo timestamp > $libobj" # $run eval "echo timestamp > $libobj" || exit $? exit $EXIT_SUCCESS fi if test -n "$pic_flag" || test "$pic_mode" != default; then # Only do commands if we really have different PIC objects. reload_objs="$libobjs $reload_conv_objs" output="$libobj" cmds=$reload_cmds save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" fi if test -n "$gentop"; then $show "${rm}r $gentop" $run ${rm}r $gentop fi exit $EXIT_SUCCESS ;; prog) case $host in *cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;; esac if test -n "$vinfo"; then $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2 fi if test -n "$release"; then $echo "$modename: warning: \`-release' is ignored for programs" 1>&2 fi if test "$preload" = yes; then if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown && test "$dlopen_self_static" = unknown; then $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support." fi fi case $host in *-*-rhapsody* | *-*-darwin1.[012]) # On Rhapsody replace the C library is the System framework compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'` finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'` ;; esac case $host in *darwin*) # Don't allow lazy linking, it breaks C++ global constructors if test "$tagname" = CXX ; then compile_command="$compile_command ${wl}-bind_at_load" finalize_command="$finalize_command ${wl}-bind_at_load" fi ;; esac # move library search paths that coincide with paths to not yet # installed libraries to the beginning of the library search list new_libs= for path in $notinst_path; do case " $new_libs " in *" -L$path/$objdir "*) ;; *) case " $compile_deplibs " in *" -L$path/$objdir "*) new_libs="$new_libs -L$path/$objdir" ;; esac ;; esac done for deplib in $compile_deplibs; do case $deplib in -L*) case " $new_libs " in *" $deplib "*) ;; *) new_libs="$new_libs $deplib" ;; esac ;; *) new_libs="$new_libs $deplib" ;; esac done compile_deplibs="$new_libs" compile_command="$compile_command $compile_deplibs" finalize_command="$finalize_command $finalize_deplibs" if test -n "$rpath$xrpath"; then # If the user specified any rpath flags, then add them. for libdir in $rpath $xrpath; do # This is the magic to use -rpath. case "$finalize_rpath " in *" $libdir "*) ;; *) finalize_rpath="$finalize_rpath $libdir" ;; esac done fi # Now hardcode the library paths rpath= hardcode_libdirs= for libdir in $compile_rpath $finalize_rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then if test -z "$hardcode_libdirs"; then hardcode_libdirs="$libdir" else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" rpath="$rpath $flag" fi elif test -n "$runpath_var"; then case "$perm_rpath " in *" $libdir "*) ;; *) perm_rpath="$perm_rpath $libdir" ;; esac fi case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) testbindir=`$echo "X$libdir" | $Xsed -e 's*/lib$*/bin*'` case :$dllsearchpath: in *":$libdir:"*) ;; *) dllsearchpath="$dllsearchpath:$libdir";; esac case :$dllsearchpath: in *":$testbindir:"*) ;; *) dllsearchpath="$dllsearchpath:$testbindir";; esac ;; esac done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" eval rpath=\" $hardcode_libdir_flag_spec\" fi compile_rpath="$rpath" rpath= hardcode_libdirs= for libdir in $finalize_rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then if test -z "$hardcode_libdirs"; then hardcode_libdirs="$libdir" else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" rpath="$rpath $flag" fi elif test -n "$runpath_var"; then case "$finalize_perm_rpath " in *" $libdir "*) ;; *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; esac fi done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" eval rpath=\" $hardcode_libdir_flag_spec\" fi finalize_rpath="$rpath" if test -n "$libobjs" && test "$build_old_libs" = yes; then # Transform all the library objects into standard objects. compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` fi dlsyms= if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then if test -n "$NM" && test -n "$global_symbol_pipe"; then dlsyms="${outputname}S.c" else $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2 fi fi if test -n "$dlsyms"; then case $dlsyms in "") ;; *.c) # Discover the nlist of each of the dlfiles. nlist="$output_objdir/${outputname}.nm" $show "$rm $nlist ${nlist}S ${nlist}T" $run $rm "$nlist" "${nlist}S" "${nlist}T" # Parse the name list into a source file. $show "creating $output_objdir/$dlsyms" test -z "$run" && $echo > "$output_objdir/$dlsyms" "\ /* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */ /* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */ #ifdef __cplusplus extern \"C\" { #endif /* Prevent the only kind of declaration conflicts we can make. */ #define lt_preloaded_symbols some_other_symbol /* External symbol declarations for the compiler. */\ " if test "$dlself" = yes; then $show "generating symbol list for \`$output'" test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist" # Add our own program objects to the symbol list. progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` for arg in $progfiles; do $show "extracting global C symbols from \`$arg'" $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" done if test -n "$exclude_expsyms"; then $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' $run eval '$mv "$nlist"T "$nlist"' fi if test -n "$export_symbols_regex"; then $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' $run eval '$mv "$nlist"T "$nlist"' fi # Prepare the list of exported symbols if test -z "$export_symbols"; then export_symbols="$output_objdir/$outputname.exp" $run $rm $export_symbols $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' case $host in *cygwin* | *mingw* ) $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' $run eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' ;; esac else $run eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' $run eval 'mv "$nlist"T "$nlist"' case $host in *cygwin* | *mingw* ) $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' $run eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' ;; esac fi fi for arg in $dlprefiles; do $show "extracting global C symbols from \`$arg'" name=`$echo "$arg" | ${SED} -e 's%^.*/%%'` $run eval '$echo ": $name " >> "$nlist"' $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" done if test -z "$run"; then # Make sure we have at least an empty file. test -f "$nlist" || : > "$nlist" if test -n "$exclude_expsyms"; then $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T $mv "$nlist"T "$nlist" fi # Try sorting and uniquifying the output. if grep -v "^: " < "$nlist" | if sort -k 3 /dev/null 2>&1; then sort -k 3 else sort +2 fi | uniq > "$nlist"S; then : else grep -v "^: " < "$nlist" > "$nlist"S fi if test -f "$nlist"S; then eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"' else $echo '/* NONE */' >> "$output_objdir/$dlsyms" fi $echo >> "$output_objdir/$dlsyms" "\ #undef lt_preloaded_symbols #if defined (__STDC__) && __STDC__ # define lt_ptr void * #else # define lt_ptr char * # define const #endif /* The mapping between symbol names and symbols. */ " case $host in *cygwin* | *mingw* ) $echo >> "$output_objdir/$dlsyms" "\ /* DATA imports from DLLs on WIN32 can't be const, because runtime relocations are performed -- see ld's documentation on pseudo-relocs */ struct { " ;; * ) $echo >> "$output_objdir/$dlsyms" "\ const struct { " ;; esac $echo >> "$output_objdir/$dlsyms" "\ const char *name; lt_ptr address; } lt_preloaded_symbols[] = {\ " eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms" $echo >> "$output_objdir/$dlsyms" "\ {0, (lt_ptr) 0} }; /* This works around a problem in FreeBSD linker */ #ifdef FREEBSD_WORKAROUND static const void *lt_preloaded_setup() { return lt_preloaded_symbols; } #endif #ifdef __cplusplus } #endif\ " fi pic_flag_for_symtable= case $host in # compiling the symbol table file with pic_flag works around # a FreeBSD bug that causes programs to crash when -lm is # linked before any other PIC object. But we must not use # pic_flag when linking with -static. The problem exists in # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) case "$compile_command " in *" -static "*) ;; *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";; esac;; *-*-hpux*) case "$compile_command " in *" -static "*) ;; *) pic_flag_for_symtable=" $pic_flag";; esac esac # Now compile the dynamic symbol file. $show "(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")" $run eval '(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $? # Clean up the generated files. $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T" $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T" # Transform the symbol file into the correct name. case $host in *cygwin* | *mingw* ) if test -f "$output_objdir/${outputname}.def" ; then compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP` finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP` else compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP` finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP` fi ;; * ) compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP` finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP` ;; esac ;; *) $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2 exit $EXIT_FAILURE ;; esac else # We keep going just in case the user didn't refer to # lt_preloaded_symbols. The linker will fail if global_symbol_pipe # really was required. # Nullify the symbol file. compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP` finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP` fi if test "$need_relink" = no || test "$build_libtool_libs" != yes; then # Replace the output file specification. compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$output"'%g' | $NL2SP` link_command="$compile_command$compile_rpath" # We have no uninstalled library dependencies, so finalize right now. $show "$link_command" $run eval "$link_command" exit_status=$? # Delete the generated files. if test -n "$dlsyms"; then $show "$rm $output_objdir/${outputname}S.${objext}" $run $rm "$output_objdir/${outputname}S.${objext}" fi exit $exit_status fi if test -n "$shlibpath_var"; then # We should set the shlibpath_var rpath= for dir in $temp_rpath; do case $dir in [\\/]* | [A-Za-z]:[\\/]*) # Absolute path. rpath="$rpath$dir:" ;; *) # Relative path: add a thisdir entry. rpath="$rpath\$thisdir/$dir:" ;; esac done temp_rpath="$rpath" fi if test -n "$compile_shlibpath$finalize_shlibpath"; then compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" fi if test -n "$finalize_shlibpath"; then finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" fi compile_var= finalize_var= if test -n "$runpath_var"; then if test -n "$perm_rpath"; then # We should set the runpath_var. rpath= for dir in $perm_rpath; do rpath="$rpath$dir:" done compile_var="$runpath_var=\"$rpath\$$runpath_var\" " fi if test -n "$finalize_perm_rpath"; then # We should set the runpath_var. rpath= for dir in $finalize_perm_rpath; do rpath="$rpath$dir:" done finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " fi fi if test "$no_install" = yes; then # We don't need to create a wrapper script. link_command="$compile_var$compile_command$compile_rpath" # Replace the output file specification. link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` # Delete the old output file. $run $rm $output # Link the executable and exit $show "$link_command" $run eval "$link_command" || exit $? exit $EXIT_SUCCESS fi if test "$hardcode_action" = relink; then # Fast installation is not supported link_command="$compile_var$compile_command$compile_rpath" relink_command="$finalize_var$finalize_command$finalize_rpath" $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2 $echo "$modename: \`$output' will be relinked during installation" 1>&2 else if test "$fast_install" != no; then link_command="$finalize_var$compile_command$finalize_rpath" if test "$fast_install" = yes; then relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $SP2NL | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g' | $NL2SP` else # fast_install is set to needless relink_command= fi else link_command="$compile_var$compile_command$compile_rpath" relink_command="$finalize_var$finalize_command$finalize_rpath" fi fi # Replace the output file specification. link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` # Delete the old output files. $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname $show "$link_command" $run eval "$link_command" || exit $? # Now create the wrapper script. $show "creating $output" # Quote the relink command for shipping. if test -n "$relink_command"; then # Preserve any variables that may affect compiler behavior for var in $variables_saved_for_relink; do if eval test -z \"\${$var+set}\"; then relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" elif eval var_value=\$$var; test -z "$var_value"; then relink_command="$var=; export $var; $relink_command" else var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` relink_command="$var=\"$var_value\"; export $var; $relink_command" fi done relink_command="(cd `pwd`; $relink_command)" relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP` fi # Quote $echo for shipping. if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then case $progpath in [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";; *) qecho="$SHELL `pwd`/$progpath --fallback-echo";; esac qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"` else qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"` fi # Only actually do things if our run command is non-null. if test -z "$run"; then # win32 will think the script is a binary if it has # a .exe suffix, so we strip it off here. case $output in *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;; esac # test for cygwin because mv fails w/o .exe extensions case $host in *cygwin*) exeext=.exe outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;; *) exeext= ;; esac case $host in *cygwin* | *mingw* ) output_name=`basename $output` output_path=`dirname $output` cwrappersource="$output_path/$objdir/lt-$output_name.c" cwrapper="$output_path/$output_name.exe" $rm $cwrappersource $cwrapper trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 cat > $cwrappersource <> $cwrappersource<<"EOF" #include #include #include #include #include #include #include #include #include #if defined(PATH_MAX) # define LT_PATHMAX PATH_MAX #elif defined(MAXPATHLEN) # define LT_PATHMAX MAXPATHLEN #else # define LT_PATHMAX 1024 #endif #ifndef DIR_SEPARATOR # define DIR_SEPARATOR '/' # define PATH_SEPARATOR ':' #endif #if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ defined (__OS2__) # define HAVE_DOS_BASED_FILE_SYSTEM # ifndef DIR_SEPARATOR_2 # define DIR_SEPARATOR_2 '\\' # endif # ifndef PATH_SEPARATOR_2 # define PATH_SEPARATOR_2 ';' # endif #endif #ifndef DIR_SEPARATOR_2 # define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) #else /* DIR_SEPARATOR_2 */ # define IS_DIR_SEPARATOR(ch) \ (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) #endif /* DIR_SEPARATOR_2 */ #ifndef PATH_SEPARATOR_2 # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) #else /* PATH_SEPARATOR_2 */ # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) #endif /* PATH_SEPARATOR_2 */ #define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) #define XFREE(stale) do { \ if (stale) { free ((void *) stale); stale = 0; } \ } while (0) /* -DDEBUG is fairly common in CFLAGS. */ #undef DEBUG #if defined DEBUGWRAPPER # define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__) #else # define DEBUG(format, ...) #endif const char *program_name = NULL; void * xmalloc (size_t num); char * xstrdup (const char *string); const char * base_name (const char *name); char * find_executable(const char *wrapper); int check_executable(const char *path); char * strendzap(char *str, const char *pat); void lt_fatal (const char *message, ...); int main (int argc, char *argv[]) { char **newargz; int i; program_name = (char *) xstrdup (base_name (argv[0])); DEBUG("(main) argv[0] : %s\n",argv[0]); DEBUG("(main) program_name : %s\n",program_name); newargz = XMALLOC(char *, argc+2); EOF cat >> $cwrappersource <> $cwrappersource <<"EOF" newargz[1] = find_executable(argv[0]); if (newargz[1] == NULL) lt_fatal("Couldn't find %s", argv[0]); DEBUG("(main) found exe at : %s\n",newargz[1]); /* we know the script has the same name, without the .exe */ /* so make sure newargz[1] doesn't end in .exe */ strendzap(newargz[1],".exe"); for (i = 1; i < argc; i++) newargz[i+1] = xstrdup(argv[i]); newargz[argc+1] = NULL; for (i=0; i> $cwrappersource <> $cwrappersource <> $cwrappersource <<"EOF" return 127; } void * xmalloc (size_t num) { void * p = (void *) malloc (num); if (!p) lt_fatal ("Memory exhausted"); return p; } char * xstrdup (const char *string) { return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL ; } const char * base_name (const char *name) { const char *base; #if defined (HAVE_DOS_BASED_FILE_SYSTEM) /* Skip over the disk name in MSDOS pathnames. */ if (isalpha ((unsigned char)name[0]) && name[1] == ':') name += 2; #endif for (base = name; *name; name++) if (IS_DIR_SEPARATOR (*name)) base = name + 1; return base; } int check_executable(const char * path) { struct stat st; DEBUG("(check_executable) : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!"); if ((!path) || (!*path)) return 0; if ((stat (path, &st) >= 0) && ( /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */ #if defined (S_IXOTH) ((st.st_mode & S_IXOTH) == S_IXOTH) || #endif #if defined (S_IXGRP) ((st.st_mode & S_IXGRP) == S_IXGRP) || #endif ((st.st_mode & S_IXUSR) == S_IXUSR)) ) return 1; else return 0; } /* Searches for the full path of the wrapper. Returns newly allocated full path name if found, NULL otherwise */ char * find_executable (const char* wrapper) { int has_slash = 0; const char* p; const char* p_next; /* static buffer for getcwd */ char tmp[LT_PATHMAX + 1]; int tmp_len; char* concat_name; DEBUG("(find_executable) : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"); if ((wrapper == NULL) || (*wrapper == '\0')) return NULL; /* Absolute path? */ #if defined (HAVE_DOS_BASED_FILE_SYSTEM) if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':') { concat_name = xstrdup (wrapper); if (check_executable(concat_name)) return concat_name; XFREE(concat_name); } else { #endif if (IS_DIR_SEPARATOR (wrapper[0])) { concat_name = xstrdup (wrapper); if (check_executable(concat_name)) return concat_name; XFREE(concat_name); } #if defined (HAVE_DOS_BASED_FILE_SYSTEM) } #endif for (p = wrapper; *p; p++) if (*p == '/') { has_slash = 1; break; } if (!has_slash) { /* no slashes; search PATH */ const char* path = getenv ("PATH"); if (path != NULL) { for (p = path; *p; p = p_next) { const char* q; size_t p_len; for (q = p; *q; q++) if (IS_PATH_SEPARATOR(*q)) break; p_len = q - p; p_next = (*q == '\0' ? q : q + 1); if (p_len == 0) { /* empty path: current directory */ if (getcwd (tmp, LT_PATHMAX) == NULL) lt_fatal ("getcwd failed"); tmp_len = strlen(tmp); concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1); memcpy (concat_name, tmp, tmp_len); concat_name[tmp_len] = '/'; strcpy (concat_name + tmp_len + 1, wrapper); } else { concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1); memcpy (concat_name, p, p_len); concat_name[p_len] = '/'; strcpy (concat_name + p_len + 1, wrapper); } if (check_executable(concat_name)) return concat_name; XFREE(concat_name); } } /* not found in PATH; assume curdir */ } /* Relative path | not found in path: prepend cwd */ if (getcwd (tmp, LT_PATHMAX) == NULL) lt_fatal ("getcwd failed"); tmp_len = strlen(tmp); concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1); memcpy (concat_name, tmp, tmp_len); concat_name[tmp_len] = '/'; strcpy (concat_name + tmp_len + 1, wrapper); if (check_executable(concat_name)) return concat_name; XFREE(concat_name); return NULL; } char * strendzap(char *str, const char *pat) { size_t len, patlen; assert(str != NULL); assert(pat != NULL); len = strlen(str); patlen = strlen(pat); if (patlen <= len) { str += len - patlen; if (strcmp(str, pat) == 0) *str = '\0'; } return str; } static void lt_error_core (int exit_status, const char * mode, const char * message, va_list ap) { fprintf (stderr, "%s: %s: ", program_name, mode); vfprintf (stderr, message, ap); fprintf (stderr, ".\n"); if (exit_status >= 0) exit (exit_status); } void lt_fatal (const char *message, ...) { va_list ap; va_start (ap, message); lt_error_core (EXIT_FAILURE, "FATAL", message, ap); va_end (ap); } EOF # we should really use a build-platform specific compiler # here, but OTOH, the wrappers (shell script and this C one) # are only useful if you want to execute the "real" binary. # Since the "real" binary is built for $host, then this # wrapper might as well be built for $host, too. $run $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource ;; esac $rm $output trap "$rm $output; exit $EXIT_FAILURE" 1 2 15 $echo > $output "\ #! $SHELL # $output - temporary wrapper script for $objdir/$outputname # Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP # # The $output program cannot be directly executed until all the libtool # libraries that it depends on are installed. # # This wrapper script should never be moved out of the build directory. # If it is, it will not operate correctly. # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. Xsed='${SED} -e 1s/^X//' sed_quote_subst='$sed_quote_subst' # Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE). if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which # is contrary to our usage. Disable this feature. alias -g '\${1+\"\$@\"}'='\"\$@\"' setopt NO_GLOB_SUBST else case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac fi BIN_SH=xpg4; export BIN_SH # for Tru64 DUALCASE=1; export DUALCASE # for MKS sh # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH relink_command=\"$relink_command\" # This environment variable determines our operation mode. if test \"\$libtool_install_magic\" = \"$magic\"; then # install mode needs the following variable: notinst_deplibs='$notinst_deplibs' else # When we are sourced in execute mode, \$file and \$echo are already set. if test \"\$libtool_execute_magic\" != \"$magic\"; then echo=\"$qecho\" file=\"\$0\" # Make sure echo works. if test \"X\$1\" = X--no-reexec; then # Discard the --no-reexec flag, and continue. shift elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then # Yippee, \$echo works! : else # Restart under the correct shell, and then maybe \$echo will work. exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} fi fi\ " $echo >> $output "\ # Find the directory that this script lives in. thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` test \"x\$thisdir\" = \"x\$file\" && thisdir=. # Follow symbolic links until we get to the real thisdir. file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` while test -n \"\$file\"; do destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` # If there was a directory component, then change thisdir. if test \"x\$destdir\" != \"x\$file\"; then case \"\$destdir\" in [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; *) thisdir=\"\$thisdir/\$destdir\" ;; esac fi file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\` file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` done # Try to get the absolute directory name. absdir=\`cd \"\$thisdir\" && pwd\` test -n \"\$absdir\" && thisdir=\"\$absdir\" " if test "$fast_install" = yes; then $echo >> $output "\ program=lt-'$outputname'$exeext progdir=\"\$thisdir/$objdir\" if test ! -f \"\$progdir/\$program\" || \\ { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ test \"X\$file\" != \"X\$progdir/\$program\"; }; then file=\"\$\$-\$program\" if test ! -d \"\$progdir\"; then $mkdir \"\$progdir\" else $rm \"\$progdir/\$file\" fi" $echo >> $output "\ # relink executable if necessary if test -n \"\$relink_command\"; then if relink_command_output=\`eval \$relink_command 2>&1\`; then : else $echo \"\$relink_command_output\" >&2 $rm \"\$progdir/\$file\" exit $EXIT_FAILURE fi fi $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || { $rm \"\$progdir/\$program\"; $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; } $rm \"\$progdir/\$file\" fi" else $echo >> $output "\ program='$outputname' progdir=\"\$thisdir/$objdir\" " fi $echo >> $output "\ if test -f \"\$progdir/\$program\"; then" # Export our shlibpath_var if we have one. if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then $echo >> $output "\ # Add our own library path to $shlibpath_var $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" # Some systems cannot cope with colon-terminated $shlibpath_var # The second colon is a workaround for a bug in BeOS R4 sed $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` export $shlibpath_var " fi # fixup the dll searchpath if we need to. if test -n "$dllsearchpath"; then $echo >> $output "\ # Add the dll search path components to the executable PATH PATH=$dllsearchpath:\$PATH " fi $echo >> $output "\ if test \"\$libtool_execute_magic\" != \"$magic\"; then # Run the actual program with our arguments. " case $host in # Backslashes separate directories on plain windows *-*-mingw | *-*-os2*) $echo >> $output "\ exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} " ;; *) $echo >> $output "\ exec \"\$progdir/\$program\" \${1+\"\$@\"} " ;; esac $echo >> $output "\ \$echo \"\$0: cannot exec \$program \$*\" exit $EXIT_FAILURE fi else # The program doesn't exist. \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 \$echo \"This script is just a wrapper for \$program.\" 1>&2 $echo \"See the $PACKAGE documentation for more information.\" 1>&2 exit $EXIT_FAILURE fi fi\ " chmod +x $output fi exit $EXIT_SUCCESS ;; esac # See if we need to build an old-fashioned archive. for oldlib in $oldlibs; do if test "$build_libtool_libs" = convenience; then oldobjs="$libobjs_save" addlibs="$convenience" build_libtool_libs=no else if test "$build_libtool_libs" = module; then oldobjs="$libobjs_save" build_libtool_libs=no else oldobjs="$old_deplibs $non_pic_objects" fi addlibs="$old_convenience" fi if test -n "$addlibs"; then gentop="$output_objdir/${outputname}x" generated="$generated $gentop" func_extract_archives $gentop $addlibs oldobjs="$oldobjs $func_extract_archives_result" fi # Do each command in the archive commands. if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then cmds=$old_archive_from_new_cmds else # POSIX demands no paths to be encoded in archives. We have # to avoid creating archives with duplicate basenames if we # might have to extract them afterwards, e.g., when creating a # static archive out of a convenience library, or when linking # the entirety of a libtool archive into another (currently # not supported by libtool). if (for obj in $oldobjs do $echo "X$obj" | $Xsed -e 's%^.*/%%' done | sort | sort -uc >/dev/null 2>&1); then : else $echo "copying selected object files to avoid basename conflicts..." if test -z "$gentop"; then gentop="$output_objdir/${outputname}x" generated="$generated $gentop" $show "${rm}r $gentop" $run ${rm}r "$gentop" $show "$mkdir $gentop" $run $mkdir "$gentop" exit_status=$? if test "$exit_status" -ne 0 && test ! -d "$gentop"; then exit $exit_status fi fi save_oldobjs=$oldobjs oldobjs= counter=1 for obj in $save_oldobjs do objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` case " $oldobjs " in " ") oldobjs=$obj ;; *[\ /]"$objbase "*) while :; do # Make sure we don't pick an alternate name that also # overlaps. newobj=lt$counter-$objbase counter=`expr $counter + 1` case " $oldobjs " in *[\ /]"$newobj "*) ;; *) if test ! -f "$gentop/$newobj"; then break; fi ;; esac done $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" $run ln "$obj" "$gentop/$newobj" || $run cp "$obj" "$gentop/$newobj" oldobjs="$oldobjs $gentop/$newobj" ;; *) oldobjs="$oldobjs $obj" ;; esac done fi eval cmds=\"$old_archive_cmds\" if len=`expr "X$cmds" : ".*"` && test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then cmds=$old_archive_cmds else # the command line is too long to link in one step, link in parts $echo "using piecewise archive linking..." save_RANLIB=$RANLIB RANLIB=: objlist= concat_cmds= save_oldobjs=$oldobjs # Is there a better way of finding the last object in the list? for obj in $save_oldobjs do last_oldobj=$obj done for obj in $save_oldobjs do oldobjs="$objlist $obj" objlist="$objlist $obj" eval test_cmds=\"$old_archive_cmds\" if len=`expr "X$test_cmds" : ".*" 2>/dev/null` && test "$len" -le "$max_cmd_len"; then : else # the above command should be used before it gets too long oldobjs=$objlist if test "$obj" = "$last_oldobj" ; then RANLIB=$save_RANLIB fi test -z "$concat_cmds" || concat_cmds=$concat_cmds~ eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" objlist= fi done RANLIB=$save_RANLIB oldobjs=$objlist if test "X$oldobjs" = "X" ; then eval cmds=\"\$concat_cmds\" else eval cmds=\"\$concat_cmds~\$old_archive_cmds\" fi fi fi save_ifs="$IFS"; IFS='~' for cmd in $cmds; do eval cmd=\"$cmd\" IFS="$save_ifs" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" done if test -n "$generated"; then $show "${rm}r$generated" $run ${rm}r$generated fi # Now create the libtool archive. case $output in *.la) old_library= test "$build_old_libs" = yes && old_library="$libname.$libext" $show "creating $output" # Preserve any variables that may affect compiler behavior for var in $variables_saved_for_relink; do if eval test -z \"\${$var+set}\"; then relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" elif eval var_value=\$$var; test -z "$var_value"; then relink_command="$var=; export $var; $relink_command" else var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` relink_command="$var=\"$var_value\"; export $var; $relink_command" fi done # Quote the link command for shipping. relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP` if test "$hardcode_automatic" = yes ; then relink_command= fi # Only create the output if not a dry run. if test -z "$run"; then for installed in no yes; do if test "$installed" = yes; then if test -z "$install_libdir"; then break fi output="$output_objdir/$outputname"i # Replace all uninstalled libtool libraries with the installed ones newdependency_libs= for deplib in $dependency_libs; do case $deplib in *.la) name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'` eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` if test -z "$libdir"; then $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 exit $EXIT_FAILURE fi newdependency_libs="$newdependency_libs $libdir/$name" ;; *) newdependency_libs="$newdependency_libs $deplib" ;; esac done dependency_libs="$newdependency_libs" newdlfiles= for lib in $dlfiles; do name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` if test -z "$libdir"; then $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 exit $EXIT_FAILURE fi newdlfiles="$newdlfiles $libdir/$name" done dlfiles="$newdlfiles" newdlprefiles= for lib in $dlprefiles; do name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` if test -z "$libdir"; then $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 exit $EXIT_FAILURE fi newdlprefiles="$newdlprefiles $libdir/$name" done dlprefiles="$newdlprefiles" else newdlfiles= for lib in $dlfiles; do case $lib in [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; *) abs=`pwd`"/$lib" ;; esac newdlfiles="$newdlfiles $abs" done dlfiles="$newdlfiles" newdlprefiles= for lib in $dlprefiles; do case $lib in [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; *) abs=`pwd`"/$lib" ;; esac newdlprefiles="$newdlprefiles $abs" done dlprefiles="$newdlprefiles" fi $rm $output # place dlname in correct position for cygwin tdlname=$dlname case $host,$output,$installed,$module,$dlname in *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; esac $echo > $output "\ # $outputname - a libtool library file # Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP # # Please DO NOT delete this file! # It is necessary for linking the library. # The name that we can dlopen(3). dlname='$tdlname' # Names of this library. library_names='$library_names' # The name of the static archive. old_library='$old_library' # Libraries that this one depends upon. dependency_libs='$dependency_libs' # Version information for $libname. current=$current age=$age revision=$revision # Is this an already installed library? installed=$installed # Should we warn about portability when linking against -modules? shouldnotlink=$module # Files to dlopen/dlpreopen dlopen='$dlfiles' dlpreopen='$dlprefiles' # Directory that this library needs to be installed in: libdir='$install_libdir'" if test "$installed" = no && test "$need_relink" = yes; then $echo >> $output "\ relink_command=\"$relink_command\"" fi done fi # Do a symbolic link so that the libtool archive can be found in # LD_LIBRARY_PATH before the program is installed. $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $? ;; esac exit $EXIT_SUCCESS ;; # libtool install mode install) modename="$modename: install" # There may be an optional sh(1) argument at the beginning of # install_prog (especially on Windows NT). if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || # Allow the use of GNU shtool's install command. $echo "X$nonopt" | grep shtool > /dev/null; then # Aesthetically quote it. arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"` case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac install_prog="$arg " arg="$1" shift else install_prog= arg=$nonopt fi # The real first argument should be the name of the installation program. # Aesthetically quote it. arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac install_prog="$install_prog$arg" # We need to accept at least all the BSD install flags. dest= files= opts= prev= install_type= isdir=no stripme= for arg do if test -n "$dest"; then files="$files $dest" dest=$arg continue fi case $arg in -d) isdir=yes ;; -f) case " $install_prog " in *[\\\ /]cp\ *) ;; *) prev=$arg ;; esac ;; -g | -m | -o) prev=$arg ;; -s) stripme=" -s" continue ;; -*) ;; *) # If the previous option needed an argument, then skip it. if test -n "$prev"; then prev= else dest=$arg continue fi ;; esac # Aesthetically quote the argument. arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac install_prog="$install_prog $arg" done if test -z "$install_prog"; then $echo "$modename: you must specify an install program" 1>&2 $echo "$help" 1>&2 exit $EXIT_FAILURE fi if test -n "$prev"; then $echo "$modename: the \`$prev' option requires an argument" 1>&2 $echo "$help" 1>&2 exit $EXIT_FAILURE fi if test -z "$files"; then if test -z "$dest"; then $echo "$modename: no file or destination specified" 1>&2 else $echo "$modename: you must specify a destination" 1>&2 fi $echo "$help" 1>&2 exit $EXIT_FAILURE fi # Strip any trailing slash from the destination. dest=`$echo "X$dest" | $Xsed -e 's%/$%%'` # Check to see that the destination is a directory. test -d "$dest" && isdir=yes if test "$isdir" = yes; then destdir="$dest" destname= else destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'` test "X$destdir" = "X$dest" && destdir=. destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'` # Not a directory, so check to see that there is only one file specified. set dummy $files if test "$#" -gt 2; then $echo "$modename: \`$dest' is not a directory" 1>&2 $echo "$help" 1>&2 exit $EXIT_FAILURE fi fi case $destdir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) for file in $files; do case $file in *.lo) ;; *) $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2 $echo "$help" 1>&2 exit $EXIT_FAILURE ;; esac done ;; esac # This variable tells wrapper scripts just to set variables rather # than running their programs. libtool_install_magic="$magic" staticlibs= future_libdirs= current_libdirs= for file in $files; do # Do each installation. case $file in *.$libext) # Do the static libraries later. staticlibs="$staticlibs $file" ;; *.la) # Check to see that this really is a libtool archive. if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : else $echo "$modename: \`$file' is not a valid libtool archive" 1>&2 $echo "$help" 1>&2 exit $EXIT_FAILURE fi library_names= old_library= relink_command= # If there is no directory component, then add one. case $file in */* | *\\*) . $file ;; *) . ./$file ;; esac # Add the libdir to current_libdirs if it is the destination. if test "X$destdir" = "X$libdir"; then case "$current_libdirs " in *" $libdir "*) ;; *) current_libdirs="$current_libdirs $libdir" ;; esac else # Note the libdir as a future libdir. case "$future_libdirs " in *" $libdir "*) ;; *) future_libdirs="$future_libdirs $libdir" ;; esac fi dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/ test "X$dir" = "X$file/" && dir= dir="$dir$objdir" if test -n "$relink_command"; then # Determine the prefix the user has applied to our future dir. inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"` # Don't allow the user to place us outside of our expected # location b/c this prevents finding dependent libraries that # are installed to the same prefix. # At present, this check doesn't affect windows .dll's that # are installed into $libdir/../bin (currently, that works fine) # but it's something to keep an eye on. if test "$inst_prefix_dir" = "$destdir"; then $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2 exit $EXIT_FAILURE fi if test -n "$inst_prefix_dir"; then # Stick the inst_prefix_dir data into the link command. relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%" | $NL2SP` else relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%%" | $NL2SP` fi $echo "$modename: warning: relinking \`$file'" 1>&2 $show "$relink_command" if $run eval "$relink_command"; then : else $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 exit $EXIT_FAILURE fi fi # See the names of the shared library. set dummy $library_names if test -n "$2"; then realname="$2" shift shift srcname="$realname" test -n "$relink_command" && srcname="$realname"T # Install the shared library and build the symlinks. $show "$install_prog $dir/$srcname $destdir/$realname" $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $? if test -n "$stripme" && test -n "$striplib"; then $show "$striplib $destdir/$realname" $run eval "$striplib $destdir/$realname" || exit $? fi if test "$#" -gt 0; then # Delete the old symlinks, and create new ones. # Try `ln -sf' first, because the `ln' binary might depend on # the symlink we replace! Solaris /bin/ln does not understand -f, # so we also need to try rm && ln -s. for linkname do if test "$linkname" != "$realname"; then $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })" $run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })" fi done fi # Do each command in the postinstall commands. lib="$destdir/$realname" cmds=$postinstall_cmds save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" || { lt_exit=$? # Restore the uninstalled library and exit if test "$mode" = relink; then $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)' fi exit $lt_exit } done IFS="$save_ifs" fi # Install the pseudo-library for information purposes. name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` instname="$dir/$name"i $show "$install_prog $instname $destdir/$name" $run eval "$install_prog $instname $destdir/$name" || exit $? # Maybe install the static library, too. test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" ;; *.lo) # Install (i.e. copy) a libtool object. # Figure out destination file name, if it wasn't already specified. if test -n "$destname"; then destfile="$destdir/$destname" else destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` destfile="$destdir/$destfile" fi # Deduce the name of the destination old-style object file. case $destfile in *.lo) staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"` ;; *.$objext) staticdest="$destfile" destfile= ;; *) $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2 $echo "$help" 1>&2 exit $EXIT_FAILURE ;; esac # Install the libtool object if requested. if test -n "$destfile"; then $show "$install_prog $file $destfile" $run eval "$install_prog $file $destfile" || exit $? fi # Install the old object if enabled. if test "$build_old_libs" = yes; then # Deduce the name of the old-style object file. staticobj=`$echo "X$file" | $Xsed -e "$lo2o"` $show "$install_prog $staticobj $staticdest" $run eval "$install_prog \$staticobj \$staticdest" || exit $? fi exit $EXIT_SUCCESS ;; *) # Figure out destination file name, if it wasn't already specified. if test -n "$destname"; then destfile="$destdir/$destname" else destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` destfile="$destdir/$destfile" fi # If the file is missing, and there is a .exe on the end, strip it # because it is most likely a libtool script we actually want to # install stripped_ext="" case $file in *.exe) if test ! -f "$file"; then file=`$echo $file|${SED} 's,.exe$,,'` stripped_ext=".exe" fi ;; esac # Do a test to see if this is really a libtool program. case $host in *cygwin*|*mingw*) wrapper=`$echo $file | ${SED} -e 's,.exe$,,'` ;; *) wrapper=$file ;; esac if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then notinst_deplibs= relink_command= # Note that it is not necessary on cygwin/mingw to append a dot to # foo even if both foo and FILE.exe exist: automatic-append-.exe # behavior happens only for exec(3), not for open(2)! Also, sourcing # `FILE.' does not work on cygwin managed mounts. # # If there is no directory component, then add one. case $wrapper in */* | *\\*) . ${wrapper} ;; *) . ./${wrapper} ;; esac # Check the variables that should have been set. if test -z "$notinst_deplibs"; then $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2 exit $EXIT_FAILURE fi finalize=yes for lib in $notinst_deplibs; do # Check to see that each library is installed. libdir= if test -f "$lib"; then # If there is no directory component, then add one. case $lib in */* | *\\*) . $lib ;; *) . ./$lib ;; esac fi libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test if test -n "$libdir" && test ! -f "$libfile"; then $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2 finalize=no fi done relink_command= # Note that it is not necessary on cygwin/mingw to append a dot to # foo even if both foo and FILE.exe exist: automatic-append-.exe # behavior happens only for exec(3), not for open(2)! Also, sourcing # `FILE.' does not work on cygwin managed mounts. # # If there is no directory component, then add one. case $wrapper in */* | *\\*) . ${wrapper} ;; *) . ./${wrapper} ;; esac outputname= if test "$fast_install" = no && test -n "$relink_command"; then if test "$finalize" = yes && test -z "$run"; then tmpdir=`func_mktempdir` file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'` outputname="$tmpdir/$file" # Replace the output file specification. relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g' | $NL2SP` $show "$relink_command" if $run eval "$relink_command"; then : else $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 ${rm}r "$tmpdir" continue fi file="$outputname" else $echo "$modename: warning: cannot relink \`$file'" 1>&2 fi else # Install the binary that we compiled earlier. file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` fi fi # remove .exe since cygwin /usr/bin/install will append another # one anyway case $install_prog,$host in */usr/bin/install*,*cygwin*) case $file:$destfile in *.exe:*.exe) # this is ok ;; *.exe:*) destfile=$destfile.exe ;; *:*.exe) destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'` ;; esac ;; esac $show "$install_prog$stripme $file $destfile" $run eval "$install_prog\$stripme \$file \$destfile" || exit $? test -n "$outputname" && ${rm}r "$tmpdir" ;; esac done for file in $staticlibs; do name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` # Set up the ranlib parameters. oldlib="$destdir/$name" $show "$install_prog $file $oldlib" $run eval "$install_prog \$file \$oldlib" || exit $? if test -n "$stripme" && test -n "$old_striplib"; then $show "$old_striplib $oldlib" $run eval "$old_striplib $oldlib" || exit $? fi # Do each command in the postinstall commands. cmds=$old_postinstall_cmds save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" done if test -n "$future_libdirs"; then $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2 fi if test -n "$current_libdirs"; then # Maybe just do a dry run. test -n "$run" && current_libdirs=" -n$current_libdirs" exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' else exit $EXIT_SUCCESS fi ;; # libtool finish mode finish) modename="$modename: finish" libdirs="$nonopt" admincmds= if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then for dir do libdirs="$libdirs $dir" done for libdir in $libdirs; do if test -n "$finish_cmds"; then # Do each command in the finish commands. cmds=$finish_cmds save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" || admincmds="$admincmds $cmd" done IFS="$save_ifs" fi if test -n "$finish_eval"; then # Do the single finish_eval. eval cmds=\"$finish_eval\" $run eval "$cmds" || admincmds="$admincmds $cmds" fi done fi # Exit here if they wanted silent mode. test "$show" = : && exit $EXIT_SUCCESS $echo "X----------------------------------------------------------------------" | $Xsed $echo "Libraries have been installed in:" for libdir in $libdirs; do $echo " $libdir" done $echo $echo "If you ever happen to want to link against installed libraries" $echo "in a given directory, LIBDIR, you must either use libtool, and" $echo "specify the full pathname of the library, or use the \`-LLIBDIR'" $echo "flag during linking and do at least one of the following:" if test -n "$shlibpath_var"; then $echo " - add LIBDIR to the \`$shlibpath_var' environment variable" $echo " during execution" fi if test -n "$runpath_var"; then $echo " - add LIBDIR to the \`$runpath_var' environment variable" $echo " during linking" fi if test -n "$hardcode_libdir_flag_spec"; then libdir=LIBDIR eval flag=\"$hardcode_libdir_flag_spec\" $echo " - use the \`$flag' linker flag" fi if test -n "$admincmds"; then $echo " - have your system administrator run these commands:$admincmds" fi if test -f /etc/ld.so.conf; then $echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" fi $echo $echo "See any operating system documentation about shared libraries for" $echo "more information, such as the ld(1) and ld.so(8) manual pages." $echo "X----------------------------------------------------------------------" | $Xsed exit $EXIT_SUCCESS ;; # libtool execute mode execute) modename="$modename: execute" # The first argument is the command name. cmd="$nonopt" if test -z "$cmd"; then $echo "$modename: you must specify a COMMAND" 1>&2 $echo "$help" exit $EXIT_FAILURE fi # Handle -dlopen flags immediately. for file in $execute_dlfiles; do if test ! -f "$file"; then $echo "$modename: \`$file' is not a file" 1>&2 $echo "$help" 1>&2 exit $EXIT_FAILURE fi dir= case $file in *.la) # Check to see that this really is a libtool archive. if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : else $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 $echo "$help" 1>&2 exit $EXIT_FAILURE fi # Read the libtool library. dlname= library_names= # If there is no directory component, then add one. case $file in */* | *\\*) . $file ;; *) . ./$file ;; esac # Skip this library if it cannot be dlopened. if test -z "$dlname"; then # Warn if it was a shared library. test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'" continue fi dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` test "X$dir" = "X$file" && dir=. if test -f "$dir/$objdir/$dlname"; then dir="$dir/$objdir" else if test ! -f "$dir/$dlname"; then $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2 exit $EXIT_FAILURE fi fi ;; *.lo) # Just add the directory containing the .lo file. dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` test "X$dir" = "X$file" && dir=. ;; *) $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2 continue ;; esac # Get the absolute pathname. absdir=`cd "$dir" && pwd` test -n "$absdir" && dir="$absdir" # Now add the directory to shlibpath_var. if eval "test -z \"\$$shlibpath_var\""; then eval "$shlibpath_var=\"\$dir\"" else eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" fi done # This variable tells wrapper scripts just to set shlibpath_var # rather than running their programs. libtool_execute_magic="$magic" # Check if any of the arguments is a wrapper script. args= for file do case $file in -*) ;; *) # Do a test to see if this is really a libtool program. if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then # If there is no directory component, then add one. case $file in */* | *\\*) . $file ;; *) . ./$file ;; esac # Transform arg to wrapped name. file="$progdir/$program" fi ;; esac # Quote arguments (to preserve shell metacharacters). file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"` args="$args \"$file\"" done if test -z "$run"; then if test -n "$shlibpath_var"; then # Export the shlibpath_var. eval "export $shlibpath_var" fi # Restore saved environment variables for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES do eval "if test \"\${save_$lt_var+set}\" = set; then $lt_var=\$save_$lt_var; export $lt_var fi" done # Now prepare to actually exec the command. exec_cmd="\$cmd$args" else # Display what would be done. if test -n "$shlibpath_var"; then eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\"" $echo "export $shlibpath_var" fi $echo "$cmd$args" exit $EXIT_SUCCESS fi ;; # libtool clean and uninstall mode clean | uninstall) modename="$modename: $mode" rm="$nonopt" files= rmforce= exit_status=0 # This variable tells wrapper scripts just to set variables rather # than running their programs. libtool_install_magic="$magic" for arg do case $arg in -f) rm="$rm $arg"; rmforce=yes ;; -*) rm="$rm $arg" ;; *) files="$files $arg" ;; esac done if test -z "$rm"; then $echo "$modename: you must specify an RM program" 1>&2 $echo "$help" 1>&2 exit $EXIT_FAILURE fi rmdirs= origobjdir="$objdir" for file in $files; do dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` if test "X$dir" = "X$file"; then dir=. objdir="$origobjdir" else objdir="$dir/$origobjdir" fi name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` test "$mode" = uninstall && objdir="$dir" # Remember objdir for removal later, being careful to avoid duplicates if test "$mode" = clean; then case " $rmdirs " in *" $objdir "*) ;; *) rmdirs="$rmdirs $objdir" ;; esac fi # Don't error if the file doesn't exist and rm -f was used. if (test -L "$file") >/dev/null 2>&1 \ || (test -h "$file") >/dev/null 2>&1 \ || test -f "$file"; then : elif test -d "$file"; then exit_status=1 continue elif test "$rmforce" = yes; then continue fi rmfiles="$file" case $name in *.la) # Possibly a libtool archive, so verify it. if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then . $dir/$name # Delete the libtool libraries and symlinks. for n in $library_names; do rmfiles="$rmfiles $objdir/$n" done test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library" case "$mode" in clean) case " $library_names " in # " " in the beginning catches empty $dlname *" $dlname "*) ;; *) rmfiles="$rmfiles $objdir/$dlname" ;; esac test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" ;; uninstall) if test -n "$library_names"; then # Do each command in the postuninstall commands. cmds=$postuninstall_cmds save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" if test "$?" -ne 0 && test "$rmforce" != yes; then exit_status=1 fi done IFS="$save_ifs" fi if test -n "$old_library"; then # Do each command in the old_postuninstall commands. cmds=$old_postuninstall_cmds save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" eval cmd=\"$cmd\" $show "$cmd" $run eval "$cmd" if test "$?" -ne 0 && test "$rmforce" != yes; then exit_status=1 fi done IFS="$save_ifs" fi # FIXME: should reinstall the best remaining shared library. ;; esac fi ;; *.lo) # Possibly a libtool object, so verify it. if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then # Read the .lo file . $dir/$name # Add PIC object to the list of files to remove. if test -n "$pic_object" \ && test "$pic_object" != none; then rmfiles="$rmfiles $dir/$pic_object" fi # Add non-PIC object to the list of files to remove. if test -n "$non_pic_object" \ && test "$non_pic_object" != none; then rmfiles="$rmfiles $dir/$non_pic_object" fi fi ;; *) if test "$mode" = clean ; then noexename=$name case $file in *.exe) file=`$echo $file|${SED} 's,.exe$,,'` noexename=`$echo $name|${SED} 's,.exe$,,'` # $file with .exe has already been added to rmfiles, # add $file without .exe rmfiles="$rmfiles $file" ;; esac # Do a test to see if this is a libtool program. if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then relink_command= . $dir/$noexename # note $name still contains .exe if it was in $file originally # as does the version of $file that was added into $rmfiles rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}" if test "$fast_install" = yes && test -n "$relink_command"; then rmfiles="$rmfiles $objdir/lt-$name" fi if test "X$noexename" != "X$name" ; then rmfiles="$rmfiles $objdir/lt-${noexename}.c" fi fi fi ;; esac $show "$rm $rmfiles" $run $rm $rmfiles || exit_status=1 done objdir="$origobjdir" # Try to remove the ${objdir}s in the directories where we deleted files for dir in $rmdirs; do if test -d "$dir"; then $show "rmdir $dir" $run rmdir $dir >/dev/null 2>&1 fi done exit $exit_status ;; "") $echo "$modename: you must specify a MODE" 1>&2 $echo "$generic_help" 1>&2 exit $EXIT_FAILURE ;; esac if test -z "$exec_cmd"; then $echo "$modename: invalid operation mode \`$mode'" 1>&2 $echo "$generic_help" 1>&2 exit $EXIT_FAILURE fi fi # test -z "$show_help" if test -n "$exec_cmd"; then eval exec $exec_cmd exit $EXIT_FAILURE fi # We need to display help for each of the modes. case $mode in "") $echo \ "Usage: $modename [OPTION]... [MODE-ARG]... Provide generalized library-building support services. --config show all configuration variables --debug enable verbose shell tracing -n, --dry-run display commands without modifying any files --features display basic configuration information and exit --finish same as \`--mode=finish' --help display this help message and exit --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS] --quiet same as \`--silent' --silent don't print informational messages --tag=TAG use configuration variables from tag TAG --version print version information MODE must be one of the following: clean remove files from the build directory compile compile a source file into a libtool object execute automatically set library path, then run a program finish complete the installation of libtool libraries install install libraries or executables link create a library or an executable uninstall remove libraries from an installed directory MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for a more detailed description of MODE. Report bugs to ." exit $EXIT_SUCCESS ;; clean) $echo \ "Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE... Remove files from the build directory. RM is the name of the program to use to delete files associated with each FILE (typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed to RM. If FILE is a libtool library, object or program, all the files associated with it are deleted. Otherwise, only FILE itself is deleted using RM." ;; compile) $echo \ "Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE Compile a source file into a libtool library object. This mode accepts the following additional options: -o OUTPUT-FILE set the output file name to OUTPUT-FILE -prefer-pic try to building PIC objects only -prefer-non-pic try to building non-PIC objects only -static always build a \`.o' file suitable for static linking COMPILE-COMMAND is a command to be used in creating a \`standard' object file from the given SOURCEFILE. The output file name is determined by removing the directory component from SOURCEFILE, then substituting the C source code suffix \`.c' with the library object suffix, \`.lo'." ;; execute) $echo \ "Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]... Automatically set library path, then run a program. This mode accepts the following additional options: -dlopen FILE add the directory containing FILE to the library path This mode sets the library path environment variable according to \`-dlopen' flags. If any of the ARGS are libtool executable wrappers, then they are translated into their corresponding uninstalled binary, and any of their required library directories are added to the library path. Then, COMMAND is executed, with ARGS as arguments." ;; finish) $echo \ "Usage: $modename [OPTION]... --mode=finish [LIBDIR]... Complete the installation of libtool libraries. Each LIBDIR is a directory that contains libtool libraries. The commands that this mode executes may require superuser privileges. Use the \`--dry-run' option if you just want to see what would be executed." ;; install) $echo \ "Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND... Install executables or libraries. INSTALL-COMMAND is the installation command. The first component should be either the \`install' or \`cp' program. The rest of the components are interpreted as arguments to that command (only BSD-compatible install options are recognized)." ;; link) $echo \ "Usage: $modename [OPTION]... --mode=link LINK-COMMAND... Link object files or libraries together to form another library, or to create an executable program. LINK-COMMAND is a command using the C compiler that you would use to create a program from several object files. The following components of LINK-COMMAND are treated specially: -all-static do not do any dynamic linking at all -avoid-version do not add a version suffix if possible -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) -export-symbols SYMFILE try to export only the symbols listed in SYMFILE -export-symbols-regex REGEX try to export only the symbols matching REGEX -LLIBDIR search LIBDIR for required installed libraries -lNAME OUTPUT-FILE requires the installed library libNAME -module build a library that can dlopened -no-fast-install disable the fast-install mode -no-install link a not-installable executable -no-undefined declare that a library does not refer to external symbols -o OUTPUT-FILE create OUTPUT-FILE from the specified objects -objectlist FILE Use a list of object files found in FILE to specify objects -precious-files-regex REGEX don't remove output files matching REGEX -release RELEASE specify package release information -rpath LIBDIR the created library will eventually be installed in LIBDIR -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries -static do not do any dynamic linking of uninstalled libtool libraries -static-libtool-libs do not do any dynamic linking of libtool libraries -version-info CURRENT[:REVISION[:AGE]] specify library version info [each variable defaults to 0] All other options (arguments beginning with \`-') are ignored. Every other argument is treated as a filename. Files ending in \`.la' are treated as uninstalled libtool libraries, other files are standard or library object files. If the OUTPUT-FILE ends in \`.la', then a libtool library is created, only library objects (\`.lo' files) may be specified, and \`-rpath' is required, except when creating a convenience library. If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created using \`ar' and \`ranlib', or on Windows using \`lib'. If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file is created, otherwise an executable program is created." ;; uninstall) $echo \ "Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... Remove libraries from an installation directory. RM is the name of the program to use to delete files associated with each FILE (typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed to RM. If FILE is a libtool library, all the files associated with it are deleted. Otherwise, only FILE itself is deleted using RM." ;; *) $echo "$modename: invalid operation mode \`$mode'" 1>&2 $echo "$help" 1>&2 exit $EXIT_FAILURE ;; esac $echo $echo "Try \`$modename --help' for more information about other modes." exit $? # The TAGs below are defined such that we never get into a situation # in which we disable both kinds of libraries. Given conflicting # choices, we go for a static library, that is the most portable, # since we can't tell whether shared libraries were disabled because # the user asked for that or because the platform doesn't support # them. This is particularly important on AIX, because we don't # support having both static and shared libraries enabled at the same # time on that platform, so we default to a shared-only configuration. # If a disable-shared tag is given, we'll fallback to a static-only # configuration. But we'll never go from static-only to shared-only. # ### BEGIN LIBTOOL TAG CONFIG: disable-shared disable_libs=shared # ### END LIBTOOL TAG CONFIG: disable-shared # ### BEGIN LIBTOOL TAG CONFIG: disable-static disable_libs=static # ### END LIBTOOL TAG CONFIG: disable-static # Local Variables: # mode:shell-script # sh-indentation:2 # End: obexftp-0.23/NEWS0000644000076600000240000000134711146600644010533 00000000000000ObexFTP recent NEWS =================== * proper unicode support * support for transparent OBEX-over-AT mode * working win32 support (again) * full Series 60 support * Newer Siemens phones (BFC support) * Sharp support (PCSOFTWARE uuid) * added motorola support * 3GPP 27.007 cable support (CPROT=0) * 64-bit clean * obexftpd daemon application * Motorola support, tested with models v710/e815 * be sure to give ObexFS a spin! * object caching and directory parsing (for things like ObexFS) * Nokia support via IrDA and Bluetooth * Siemens S65 support * Everything but data goes to stderr for more simple redirection. * VMO converter (gsm and wav) split into seperate package. * Ericsson and Siemens cable support unified (still testing). obexftp-0.23/config.guess0000755000076600000240000012706111146600665012361 00000000000000#! /bin/sh # Attempt to guess a canonical system name. # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, # 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation, # Inc. timestamp='2007-07-22' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA # 02110-1301, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Originally written by Per Bothner . # Please send patches to . Submit a context # diff and a properly formatted ChangeLog entry. # # This script attempts to guess a canonical system name similar to # config.sub. If it succeeds, it prints the system name on stdout, and # exits with 0. Otherwise, it exits with 1. # # The plan is that this can be called by configure scripts if you # don't specify an explicit build system type. me=`echo "$0" | sed -e 's,.*/,,'` usage="\ Usage: $0 [OPTION] Output the configuration name of the system \`$me' is run on. Operation modes: -h, --help print this help, then exit -t, --time-stamp print date of last modification, then exit -v, --version print version number, then exit Report bugs and patches to ." version="\ GNU config.guess ($timestamp) Originally written by Per Bothner. Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." help=" Try \`$me --help' for more information." # Parse command line while test $# -gt 0 ; do case $1 in --time-stamp | --time* | -t ) echo "$timestamp" ; exit ;; --version | -v ) echo "$version" ; exit ;; --help | --h* | -h ) echo "$usage"; exit ;; -- ) # Stop option processing shift; break ;; - ) # Use stdin as input. break ;; -* ) echo "$me: invalid option $1$help" >&2 exit 1 ;; * ) break ;; esac done if test $# != 0; then echo "$me: too many arguments$help" >&2 exit 1 fi trap 'exit 1' 1 2 15 # CC_FOR_BUILD -- compiler used by this script. Note that the use of a # compiler to aid in system detection is discouraged as it requires # temporary files to be created and, as you can see below, it is a # headache to deal with in a portable fashion. # Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still # use `HOST_CC' if defined, but it is deprecated. # Portable tmp directory creation inspired by the Autoconf team. set_cc_for_build=' trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; : ${TMPDIR=/tmp} ; { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; dummy=$tmp/dummy ; tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; case $CC_FOR_BUILD,$HOST_CC,$CC in ,,) echo "int x;" > $dummy.c ; for c in cc gcc c89 c99 ; do if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then CC_FOR_BUILD="$c"; break ; fi ; done ; if test x"$CC_FOR_BUILD" = x ; then CC_FOR_BUILD=no_compiler_found ; fi ;; ,,*) CC_FOR_BUILD=$CC ;; ,*,*) CC_FOR_BUILD=$HOST_CC ;; esac ; set_cc_for_build= ;' # This is needed to find uname on a Pyramid OSx when run in the BSD universe. # (ghazi@noc.rutgers.edu 1994-08-24) if (test -f /.attbin/uname) >/dev/null 2>&1 ; then PATH=$PATH:/.attbin ; export PATH fi UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown # Note: order is significant - the case branches are not exclusive. case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in *:NetBSD:*:*) # NetBSD (nbsd) targets should (where applicable) match one or # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently # switched to ELF, *-*-netbsd* would select the old # object file format. This provides both forward # compatibility and a consistent mechanism for selecting the # object file format. # # Note: NetBSD doesn't particularly care about the vendor # portion of the name. We always set it to "unknown". sysctl="sysctl -n hw.machine_arch" UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ /usr/sbin/$sysctl 2>/dev/null || echo unknown)` case "${UNAME_MACHINE_ARCH}" in armeb) machine=armeb-unknown ;; arm*) machine=arm-unknown ;; sh3el) machine=shl-unknown ;; sh3eb) machine=sh-unknown ;; sh5el) machine=sh5le-unknown ;; *) machine=${UNAME_MACHINE_ARCH}-unknown ;; esac # The Operating System including object format, if it has switched # to ELF recently, or will in the future. case "${UNAME_MACHINE_ARCH}" in arm*|i386|m68k|ns32k|sh3*|sparc|vax) eval $set_cc_for_build if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ | grep __ELF__ >/dev/null then # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). # Return netbsd for either. FIX? os=netbsd else os=netbsdelf fi ;; *) os=netbsd ;; esac # The OS release # Debian GNU/NetBSD machines have a different userland, and # thus, need a distinct triplet. However, they do not need # kernel version information, so it can be replaced with a # suitable tag, in the style of linux-gnu. case "${UNAME_VERSION}" in Debian*) release='-gnu' ;; *) release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` ;; esac # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: # contains redundant information, the shorter form: # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. echo "${machine}-${os}${release}" exit ;; *:OpenBSD:*:*) UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} exit ;; *:ekkoBSD:*:*) echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} exit ;; *:SolidBSD:*:*) echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE} exit ;; macppc:MirBSD:*:*) echo powerpc-unknown-mirbsd${UNAME_RELEASE} exit ;; *:MirBSD:*:*) echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} exit ;; alpha:OSF1:*:*) case $UNAME_RELEASE in *4.0) UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` ;; *5.*) UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` ;; esac # According to Compaq, /usr/sbin/psrinfo has been available on # OSF/1 and Tru64 systems produced since 1995. I hope that # covers most systems running today. This code pipes the CPU # types through head -n 1, so we only detect the type of CPU 0. ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` case "$ALPHA_CPU_TYPE" in "EV4 (21064)") UNAME_MACHINE="alpha" ;; "EV4.5 (21064)") UNAME_MACHINE="alpha" ;; "LCA4 (21066/21068)") UNAME_MACHINE="alpha" ;; "EV5 (21164)") UNAME_MACHINE="alphaev5" ;; "EV5.6 (21164A)") UNAME_MACHINE="alphaev56" ;; "EV5.6 (21164PC)") UNAME_MACHINE="alphapca56" ;; "EV5.7 (21164PC)") UNAME_MACHINE="alphapca57" ;; "EV6 (21264)") UNAME_MACHINE="alphaev6" ;; "EV6.7 (21264A)") UNAME_MACHINE="alphaev67" ;; "EV6.8CB (21264C)") UNAME_MACHINE="alphaev68" ;; "EV6.8AL (21264B)") UNAME_MACHINE="alphaev68" ;; "EV6.8CX (21264D)") UNAME_MACHINE="alphaev68" ;; "EV6.9A (21264/EV69A)") UNAME_MACHINE="alphaev69" ;; "EV7 (21364)") UNAME_MACHINE="alphaev7" ;; "EV7.9 (21364A)") UNAME_MACHINE="alphaev79" ;; esac # A Pn.n version is a patched version. # A Vn.n version is a released version. # A Tn.n version is a released field test version. # A Xn.n version is an unreleased experimental baselevel. # 1.2 uses "1.2" for uname -r. echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` exit ;; Alpha\ *:Windows_NT*:*) # How do we know it's Interix rather than the generic POSIX subsystem? # Should we change UNAME_MACHINE based on the output of uname instead # of the specific Alpha model? echo alpha-pc-interix exit ;; 21064:Windows_NT:50:3) echo alpha-dec-winnt3.5 exit ;; Amiga*:UNIX_System_V:4.0:*) echo m68k-unknown-sysv4 exit ;; *:[Aa]miga[Oo][Ss]:*:*) echo ${UNAME_MACHINE}-unknown-amigaos exit ;; *:[Mm]orph[Oo][Ss]:*:*) echo ${UNAME_MACHINE}-unknown-morphos exit ;; *:OS/390:*:*) echo i370-ibm-openedition exit ;; *:z/VM:*:*) echo s390-ibm-zvmoe exit ;; *:OS400:*:*) echo powerpc-ibm-os400 exit ;; arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) echo arm-acorn-riscix${UNAME_RELEASE} exit ;; arm:riscos:*:*|arm:RISCOS:*:*) echo arm-unknown-riscos exit ;; SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) echo hppa1.1-hitachi-hiuxmpp exit ;; Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. if test "`(/bin/universe) 2>/dev/null`" = att ; then echo pyramid-pyramid-sysv3 else echo pyramid-pyramid-bsd fi exit ;; NILE*:*:*:dcosx) echo pyramid-pyramid-svr4 exit ;; DRS?6000:unix:4.0:6*) echo sparc-icl-nx6 exit ;; DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) case `/usr/bin/uname -p` in sparc) echo sparc-icl-nx7; exit ;; esac ;; sun4H:SunOS:5.*:*) echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; sun4*:SunOS:6*:*) # According to config.sub, this is the proper way to canonicalize # SunOS6. Hard to guess exactly what SunOS6 will be like, but # it's likely to be more like Solaris than SunOS4. echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; sun4*:SunOS:*:*) case "`/usr/bin/arch -k`" in Series*|S4*) UNAME_RELEASE=`uname -v` ;; esac # Japanese Language versions have a version number like `4.1.3-JL'. echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` exit ;; sun3*:SunOS:*:*) echo m68k-sun-sunos${UNAME_RELEASE} exit ;; sun*:*:4.2BSD:*) UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 case "`/bin/arch`" in sun3) echo m68k-sun-sunos${UNAME_RELEASE} ;; sun4) echo sparc-sun-sunos${UNAME_RELEASE} ;; esac exit ;; aushp:SunOS:*:*) echo sparc-auspex-sunos${UNAME_RELEASE} exit ;; # The situation for MiNT is a little confusing. The machine name # can be virtually everything (everything which is not # "atarist" or "atariste" at least should have a processor # > m68000). The system name ranges from "MiNT" over "FreeMiNT" # to the lowercase version "mint" (or "freemint"). Finally # the system name "TOS" denotes a system which is actually not # MiNT. But MiNT is downward compatible to TOS, so this should # be no problem. atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} exit ;; atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} exit ;; *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} exit ;; milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) echo m68k-milan-mint${UNAME_RELEASE} exit ;; hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) echo m68k-hades-mint${UNAME_RELEASE} exit ;; *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) echo m68k-unknown-mint${UNAME_RELEASE} exit ;; m68k:machten:*:*) echo m68k-apple-machten${UNAME_RELEASE} exit ;; powerpc:machten:*:*) echo powerpc-apple-machten${UNAME_RELEASE} exit ;; RISC*:Mach:*:*) echo mips-dec-mach_bsd4.3 exit ;; RISC*:ULTRIX:*:*) echo mips-dec-ultrix${UNAME_RELEASE} exit ;; VAX*:ULTRIX*:*:*) echo vax-dec-ultrix${UNAME_RELEASE} exit ;; 2020:CLIX:*:* | 2430:CLIX:*:*) echo clipper-intergraph-clix${UNAME_RELEASE} exit ;; mips:*:*:UMIPS | mips:*:*:RISCos) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #ifdef __cplusplus #include /* for printf() prototype */ int main (int argc, char *argv[]) { #else int main (argc, argv) int argc; char *argv[]; { #endif #if defined (host_mips) && defined (MIPSEB) #if defined (SYSTYPE_SYSV) printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); #endif #if defined (SYSTYPE_SVR4) printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); #endif #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); #endif #endif exit (-1); } EOF $CC_FOR_BUILD -o $dummy $dummy.c && dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && SYSTEM_NAME=`$dummy $dummyarg` && { echo "$SYSTEM_NAME"; exit; } echo mips-mips-riscos${UNAME_RELEASE} exit ;; Motorola:PowerMAX_OS:*:*) echo powerpc-motorola-powermax exit ;; Motorola:*:4.3:PL8-*) echo powerpc-harris-powermax exit ;; Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) echo powerpc-harris-powermax exit ;; Night_Hawk:Power_UNIX:*:*) echo powerpc-harris-powerunix exit ;; m88k:CX/UX:7*:*) echo m88k-harris-cxux7 exit ;; m88k:*:4*:R4*) echo m88k-motorola-sysv4 exit ;; m88k:*:3*:R3*) echo m88k-motorola-sysv3 exit ;; AViiON:dgux:*:*) # DG/UX returns AViiON for all architectures UNAME_PROCESSOR=`/usr/bin/uname -p` if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] then if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ [ ${TARGET_BINARY_INTERFACE}x = x ] then echo m88k-dg-dgux${UNAME_RELEASE} else echo m88k-dg-dguxbcs${UNAME_RELEASE} fi else echo i586-dg-dgux${UNAME_RELEASE} fi exit ;; M88*:DolphinOS:*:*) # DolphinOS (SVR3) echo m88k-dolphin-sysv3 exit ;; M88*:*:R3*:*) # Delta 88k system running SVR3 echo m88k-motorola-sysv3 exit ;; XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) echo m88k-tektronix-sysv3 exit ;; Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) echo m68k-tektronix-bsd exit ;; *:IRIX*:*:*) echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` exit ;; ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' i*86:AIX:*:*) echo i386-ibm-aix exit ;; ia64:AIX:*:*) if [ -x /usr/bin/oslevel ] ; then IBM_REV=`/usr/bin/oslevel` else IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} fi echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} exit ;; *:AIX:2:3) if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #include main() { if (!__power_pc()) exit(1); puts("powerpc-ibm-aix3.2.5"); exit(0); } EOF if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` then echo "$SYSTEM_NAME" else echo rs6000-ibm-aix3.2.5 fi elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then echo rs6000-ibm-aix3.2.4 else echo rs6000-ibm-aix3.2 fi exit ;; *:AIX:*:[45]) IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then IBM_ARCH=rs6000 else IBM_ARCH=powerpc fi if [ -x /usr/bin/oslevel ] ; then IBM_REV=`/usr/bin/oslevel` else IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} fi echo ${IBM_ARCH}-ibm-aix${IBM_REV} exit ;; *:AIX:*:*) echo rs6000-ibm-aix exit ;; ibmrt:4.4BSD:*|romp-ibm:BSD:*) echo romp-ibm-bsd4.4 exit ;; ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to exit ;; # report: romp-ibm BSD 4.3 *:BOSX:*:*) echo rs6000-bull-bosx exit ;; DPX/2?00:B.O.S.:*:*) echo m68k-bull-sysv3 exit ;; 9000/[34]??:4.3bsd:1.*:*) echo m68k-hp-bsd exit ;; hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) echo m68k-hp-bsd4.4 exit ;; 9000/[34678]??:HP-UX:*:*) HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` case "${UNAME_MACHINE}" in 9000/31? ) HP_ARCH=m68000 ;; 9000/[34]?? ) HP_ARCH=m68k ;; 9000/[678][0-9][0-9]) if [ -x /usr/bin/getconf ]; then sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` case "${sc_cpu_version}" in 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 532) # CPU_PA_RISC2_0 case "${sc_kernel_bits}" in 32) HP_ARCH="hppa2.0n" ;; 64) HP_ARCH="hppa2.0w" ;; '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 esac ;; esac fi if [ "${HP_ARCH}" = "" ]; then eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #define _HPUX_SOURCE #include #include int main () { #if defined(_SC_KERNEL_BITS) long bits = sysconf(_SC_KERNEL_BITS); #endif long cpu = sysconf (_SC_CPU_VERSION); switch (cpu) { case CPU_PA_RISC1_0: puts ("hppa1.0"); break; case CPU_PA_RISC1_1: puts ("hppa1.1"); break; case CPU_PA_RISC2_0: #if defined(_SC_KERNEL_BITS) switch (bits) { case 64: puts ("hppa2.0w"); break; case 32: puts ("hppa2.0n"); break; default: puts ("hppa2.0"); break; } break; #else /* !defined(_SC_KERNEL_BITS) */ puts ("hppa2.0"); break; #endif default: puts ("hppa1.0"); break; } exit (0); } EOF (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` test -z "$HP_ARCH" && HP_ARCH=hppa fi ;; esac if [ ${HP_ARCH} = "hppa2.0w" ] then eval $set_cc_for_build # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler # generating 64-bit code. GNU and HP use different nomenclature: # # $ CC_FOR_BUILD=cc ./config.guess # => hppa2.0w-hp-hpux11.23 # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess # => hppa64-hp-hpux11.23 if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | grep __LP64__ >/dev/null then HP_ARCH="hppa2.0w" else HP_ARCH="hppa64" fi fi echo ${HP_ARCH}-hp-hpux${HPUX_REV} exit ;; ia64:HP-UX:*:*) HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` echo ia64-hp-hpux${HPUX_REV} exit ;; 3050*:HI-UX:*:*) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #include int main () { long cpu = sysconf (_SC_CPU_VERSION); /* The order matters, because CPU_IS_HP_MC68K erroneously returns true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct results, however. */ if (CPU_IS_PA_RISC (cpu)) { switch (cpu) { case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; default: puts ("hppa-hitachi-hiuxwe2"); break; } } else if (CPU_IS_HP_MC68K (cpu)) puts ("m68k-hitachi-hiuxwe2"); else puts ("unknown-hitachi-hiuxwe2"); exit (0); } EOF $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && { echo "$SYSTEM_NAME"; exit; } echo unknown-hitachi-hiuxwe2 exit ;; 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) echo hppa1.1-hp-bsd exit ;; 9000/8??:4.3bsd:*:*) echo hppa1.0-hp-bsd exit ;; *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) echo hppa1.0-hp-mpeix exit ;; hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) echo hppa1.1-hp-osf exit ;; hp8??:OSF1:*:*) echo hppa1.0-hp-osf exit ;; i*86:OSF1:*:*) if [ -x /usr/sbin/sysversion ] ; then echo ${UNAME_MACHINE}-unknown-osf1mk else echo ${UNAME_MACHINE}-unknown-osf1 fi exit ;; parisc*:Lites*:*:*) echo hppa1.1-hp-lites exit ;; C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) echo c1-convex-bsd exit ;; C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) if getsysinfo -f scalar_acc then echo c32-convex-bsd else echo c2-convex-bsd fi exit ;; C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) echo c34-convex-bsd exit ;; C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) echo c38-convex-bsd exit ;; C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) echo c4-convex-bsd exit ;; CRAY*Y-MP:*:*:*) echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; CRAY*[A-Z]90:*:*:*) echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ -e 's/\.[^.]*$/.X/' exit ;; CRAY*TS:*:*:*) echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; CRAY*T3E:*:*:*) echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; CRAY*SV1:*:*:*) echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; *:UNICOS/mp:*:*) echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" exit ;; 5000:UNIX_System_V:4.*:*) FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" exit ;; i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} exit ;; sparc*:BSD/OS:*:*) echo sparc-unknown-bsdi${UNAME_RELEASE} exit ;; *:BSD/OS:*:*) echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} exit ;; *:FreeBSD:*:*) case ${UNAME_MACHINE} in pc98) echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; amd64) echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; *) echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; esac exit ;; i*:CYGWIN*:*) echo ${UNAME_MACHINE}-pc-cygwin exit ;; *:MINGW*:*) echo ${UNAME_MACHINE}-pc-mingw32 exit ;; i*:windows32*:*) # uname -m includes "-pc" on this system. echo ${UNAME_MACHINE}-mingw32 exit ;; i*:PW*:*) echo ${UNAME_MACHINE}-pc-pw32 exit ;; *:Interix*:[3456]*) case ${UNAME_MACHINE} in x86) echo i586-pc-interix${UNAME_RELEASE} exit ;; EM64T | authenticamd) echo x86_64-unknown-interix${UNAME_RELEASE} exit ;; esac ;; [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) echo i${UNAME_MACHINE}-pc-mks exit ;; i*:Windows_NT*:* | Pentium*:Windows_NT*:*) # How do we know it's Interix rather than the generic POSIX subsystem? # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we # UNAME_MACHINE based on the output of uname instead of i386? echo i586-pc-interix exit ;; i*:UWIN*:*) echo ${UNAME_MACHINE}-pc-uwin exit ;; amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) echo x86_64-unknown-cygwin exit ;; p*:CYGWIN*:*) echo powerpcle-unknown-cygwin exit ;; prep*:SunOS:5.*:*) echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; *:GNU:*:*) # the GNU system echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` exit ;; *:GNU/*:*:*) # other systems with GNU libc and userland echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu exit ;; i*86:Minix:*:*) echo ${UNAME_MACHINE}-pc-minix exit ;; arm*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; avr32*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; cris:Linux:*:*) echo cris-axis-linux-gnu exit ;; crisv32:Linux:*:*) echo crisv32-axis-linux-gnu exit ;; frv:Linux:*:*) echo frv-unknown-linux-gnu exit ;; ia64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; m32r*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; m68*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; mips:Linux:*:*) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #undef CPU #undef mips #undef mipsel #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) CPU=mipsel #else #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) CPU=mips #else CPU= #endif #endif EOF eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' /^CPU/{ s: ::g p }'`" test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } ;; mips64:Linux:*:*) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #undef CPU #undef mips64 #undef mips64el #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) CPU=mips64el #else #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) CPU=mips64 #else CPU= #endif #endif EOF eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' /^CPU/{ s: ::g p }'`" test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } ;; or32:Linux:*:*) echo or32-unknown-linux-gnu exit ;; ppc:Linux:*:*) echo powerpc-unknown-linux-gnu exit ;; ppc64:Linux:*:*) echo powerpc64-unknown-linux-gnu exit ;; alpha:Linux:*:*) case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in EV5) UNAME_MACHINE=alphaev5 ;; EV56) UNAME_MACHINE=alphaev56 ;; PCA56) UNAME_MACHINE=alphapca56 ;; PCA57) UNAME_MACHINE=alphapca56 ;; EV6) UNAME_MACHINE=alphaev6 ;; EV67) UNAME_MACHINE=alphaev67 ;; EV68*) UNAME_MACHINE=alphaev68 ;; esac objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} exit ;; parisc:Linux:*:* | hppa:Linux:*:*) # Look for CPU level case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in PA7*) echo hppa1.1-unknown-linux-gnu ;; PA8*) echo hppa2.0-unknown-linux-gnu ;; *) echo hppa-unknown-linux-gnu ;; esac exit ;; parisc64:Linux:*:* | hppa64:Linux:*:*) echo hppa64-unknown-linux-gnu exit ;; s390:Linux:*:* | s390x:Linux:*:*) echo ${UNAME_MACHINE}-ibm-linux exit ;; sh64*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; sh*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; sparc:Linux:*:* | sparc64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; vax:Linux:*:*) echo ${UNAME_MACHINE}-dec-linux-gnu exit ;; x86_64:Linux:*:*) echo x86_64-unknown-linux-gnu exit ;; xtensa:Linux:*:*) echo xtensa-unknown-linux-gnu exit ;; i*86:Linux:*:*) # The BFD linker knows what the default object file format is, so # first see if it will tell us. cd to the root directory to prevent # problems with other programs or directories called `ld' in the path. # Set LC_ALL=C to ensure ld outputs messages in English. ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \ | sed -ne '/supported targets:/!d s/[ ][ ]*/ /g s/.*supported targets: *// s/ .*// p'` case "$ld_supported_targets" in elf32-i386) TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu" ;; a.out-i386-linux) echo "${UNAME_MACHINE}-pc-linux-gnuaout" exit ;; coff-i386) echo "${UNAME_MACHINE}-pc-linux-gnucoff" exit ;; "") # Either a pre-BFD a.out linker (linux-gnuoldld) or # one that does not give us useful --help. echo "${UNAME_MACHINE}-pc-linux-gnuoldld" exit ;; esac # Determine whether the default compiler is a.out or elf eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #include #ifdef __ELF__ # ifdef __GLIBC__ # if __GLIBC__ >= 2 LIBC=gnu # else LIBC=gnulibc1 # endif # else LIBC=gnulibc1 # endif #else #if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__SUNPRO_C) || defined(__SUNPRO_CC) LIBC=gnu #else LIBC=gnuaout #endif #endif #ifdef __dietlibc__ LIBC=dietlibc #endif EOF eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' /^LIBC/{ s: ::g p }'`" test x"${LIBC}" != x && { echo "${UNAME_MACHINE}-pc-linux-${LIBC}" exit } test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; } ;; i*86:DYNIX/ptx:4*:*) # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. # earlier versions are messed up and put the nodename in both # sysname and nodename. echo i386-sequent-sysv4 exit ;; i*86:UNIX_SV:4.2MP:2.*) # Unixware is an offshoot of SVR4, but it has its own version # number series starting with 2... # I am not positive that other SVR4 systems won't match this, # I just have to hope. -- rms. # Use sysv4.2uw... so that sysv4* matches it. echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} exit ;; i*86:OS/2:*:*) # If we were able to find `uname', then EMX Unix compatibility # is probably installed. echo ${UNAME_MACHINE}-pc-os2-emx exit ;; i*86:XTS-300:*:STOP) echo ${UNAME_MACHINE}-unknown-stop exit ;; i*86:atheos:*:*) echo ${UNAME_MACHINE}-unknown-atheos exit ;; i*86:syllable:*:*) echo ${UNAME_MACHINE}-pc-syllable exit ;; i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) echo i386-unknown-lynxos${UNAME_RELEASE} exit ;; i*86:*DOS:*:*) echo ${UNAME_MACHINE}-pc-msdosdjgpp exit ;; i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} else echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} fi exit ;; i*86:*:5:[678]*) # UnixWare 7.x, OpenUNIX and OpenServer 6. case `/bin/uname -X | grep "^Machine"` in *486*) UNAME_MACHINE=i486 ;; *Pentium) UNAME_MACHINE=i586 ;; *Pent*|*Celeron) UNAME_MACHINE=i686 ;; esac echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} exit ;; i*86:*:3.2:*) if test -f /usr/options/cb.name; then UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ && UNAME_MACHINE=i586 (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ && UNAME_MACHINE=i686 (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ && UNAME_MACHINE=i686 echo ${UNAME_MACHINE}-pc-sco$UNAME_REL else echo ${UNAME_MACHINE}-pc-sysv32 fi exit ;; pc:*:*:*) # Left here for compatibility: # uname -m prints for DJGPP always 'pc', but it prints nothing about # the processor, so we play safe by assuming i386. echo i386-pc-msdosdjgpp exit ;; Intel:Mach:3*:*) echo i386-pc-mach3 exit ;; paragon:*:*:*) echo i860-intel-osf1 exit ;; i860:*:4.*:*) # i860-SVR4 if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 else # Add other i860-SVR4 vendors below as they are discovered. echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 fi exit ;; mini*:CTIX:SYS*5:*) # "miniframe" echo m68010-convergent-sysv exit ;; mc68k:UNIX:SYSTEM5:3.51m) echo m68k-convergent-sysv exit ;; M680?0:D-NIX:5.3:*) echo m68k-diab-dnix exit ;; M68*:*:R3V[5678]*:*) test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) OS_REL='' test -r /etc/.relid \ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && { echo i486-ncr-sysv4.3${OS_REL}; exit; } /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && { echo i486-ncr-sysv4; exit; } ;; m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) echo m68k-unknown-lynxos${UNAME_RELEASE} exit ;; mc68030:UNIX_System_V:4.*:*) echo m68k-atari-sysv4 exit ;; TSUNAMI:LynxOS:2.*:*) echo sparc-unknown-lynxos${UNAME_RELEASE} exit ;; rs6000:LynxOS:2.*:*) echo rs6000-unknown-lynxos${UNAME_RELEASE} exit ;; PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*) echo powerpc-unknown-lynxos${UNAME_RELEASE} exit ;; SM[BE]S:UNIX_SV:*:*) echo mips-dde-sysv${UNAME_RELEASE} exit ;; RM*:ReliantUNIX-*:*:*) echo mips-sni-sysv4 exit ;; RM*:SINIX-*:*:*) echo mips-sni-sysv4 exit ;; *:SINIX-*:*:*) if uname -p 2>/dev/null >/dev/null ; then UNAME_MACHINE=`(uname -p) 2>/dev/null` echo ${UNAME_MACHINE}-sni-sysv4 else echo ns32k-sni-sysv fi exit ;; PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort # says echo i586-unisys-sysv4 exit ;; *:UNIX_System_V:4*:FTX*) # From Gerald Hewes . # How about differentiating between stratus architectures? -djm echo hppa1.1-stratus-sysv4 exit ;; *:*:*:FTX*) # From seanf@swdc.stratus.com. echo i860-stratus-sysv4 exit ;; i*86:VOS:*:*) # From Paul.Green@stratus.com. echo ${UNAME_MACHINE}-stratus-vos exit ;; *:VOS:*:*) # From Paul.Green@stratus.com. echo hppa1.1-stratus-vos exit ;; mc68*:A/UX:*:*) echo m68k-apple-aux${UNAME_RELEASE} exit ;; news*:NEWS-OS:6*:*) echo mips-sony-newsos6 exit ;; R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) if [ -d /usr/nec ]; then echo mips-nec-sysv${UNAME_RELEASE} else echo mips-unknown-sysv${UNAME_RELEASE} fi exit ;; BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. echo powerpc-be-beos exit ;; BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. echo powerpc-apple-beos exit ;; BePC:BeOS:*:*) # BeOS running on Intel PC compatible. echo i586-pc-beos exit ;; SX-4:SUPER-UX:*:*) echo sx4-nec-superux${UNAME_RELEASE} exit ;; SX-5:SUPER-UX:*:*) echo sx5-nec-superux${UNAME_RELEASE} exit ;; SX-6:SUPER-UX:*:*) echo sx6-nec-superux${UNAME_RELEASE} exit ;; SX-7:SUPER-UX:*:*) echo sx7-nec-superux${UNAME_RELEASE} exit ;; SX-8:SUPER-UX:*:*) echo sx8-nec-superux${UNAME_RELEASE} exit ;; SX-8R:SUPER-UX:*:*) echo sx8r-nec-superux${UNAME_RELEASE} exit ;; Power*:Rhapsody:*:*) echo powerpc-apple-rhapsody${UNAME_RELEASE} exit ;; *:Rhapsody:*:*) echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} exit ;; *:Darwin:*:*) UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown case $UNAME_PROCESSOR in unknown) UNAME_PROCESSOR=powerpc ;; esac echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} exit ;; *:procnto*:*:* | *:QNX:[0123456789]*:*) UNAME_PROCESSOR=`uname -p` if test "$UNAME_PROCESSOR" = "x86"; then UNAME_PROCESSOR=i386 UNAME_MACHINE=pc fi echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} exit ;; *:QNX:*:4*) echo i386-pc-qnx exit ;; NSE-?:NONSTOP_KERNEL:*:*) echo nse-tandem-nsk${UNAME_RELEASE} exit ;; NSR-?:NONSTOP_KERNEL:*:*) echo nsr-tandem-nsk${UNAME_RELEASE} exit ;; *:NonStop-UX:*:*) echo mips-compaq-nonstopux exit ;; BS2000:POSIX*:*:*) echo bs2000-siemens-sysv exit ;; DS/*:UNIX_System_V:*:*) echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} exit ;; *:Plan9:*:*) # "uname -m" is not consistent, so use $cputype instead. 386 # is converted to i386 for consistency with other x86 # operating systems. if test "$cputype" = "386"; then UNAME_MACHINE=i386 else UNAME_MACHINE="$cputype" fi echo ${UNAME_MACHINE}-unknown-plan9 exit ;; *:TOPS-10:*:*) echo pdp10-unknown-tops10 exit ;; *:TENEX:*:*) echo pdp10-unknown-tenex exit ;; KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) echo pdp10-dec-tops20 exit ;; XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) echo pdp10-xkl-tops20 exit ;; *:TOPS-20:*:*) echo pdp10-unknown-tops20 exit ;; *:ITS:*:*) echo pdp10-unknown-its exit ;; SEI:*:*:SEIUX) echo mips-sei-seiux${UNAME_RELEASE} exit ;; *:DragonFly:*:*) echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` exit ;; *:*VMS:*:*) UNAME_MACHINE=`(uname -p) 2>/dev/null` case "${UNAME_MACHINE}" in A*) echo alpha-dec-vms ; exit ;; I*) echo ia64-dec-vms ; exit ;; V*) echo vax-dec-vms ; exit ;; esac ;; *:XENIX:*:SysV) echo i386-pc-xenix exit ;; i*86:skyos:*:*) echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' exit ;; i*86:rdos:*:*) echo ${UNAME_MACHINE}-pc-rdos exit ;; esac #echo '(No uname command or uname output not recognized.)' 1>&2 #echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 eval $set_cc_for_build cat >$dummy.c < # include #endif main () { #if defined (sony) #if defined (MIPSEB) /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, I don't know.... */ printf ("mips-sony-bsd\n"); exit (0); #else #include printf ("m68k-sony-newsos%s\n", #ifdef NEWSOS4 "4" #else "" #endif ); exit (0); #endif #endif #if defined (__arm) && defined (__acorn) && defined (__unix) printf ("arm-acorn-riscix\n"); exit (0); #endif #if defined (hp300) && !defined (hpux) printf ("m68k-hp-bsd\n"); exit (0); #endif #if defined (NeXT) #if !defined (__ARCHITECTURE__) #define __ARCHITECTURE__ "m68k" #endif int version; version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; if (version < 4) printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); else printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); exit (0); #endif #if defined (MULTIMAX) || defined (n16) #if defined (UMAXV) printf ("ns32k-encore-sysv\n"); exit (0); #else #if defined (CMU) printf ("ns32k-encore-mach\n"); exit (0); #else printf ("ns32k-encore-bsd\n"); exit (0); #endif #endif #endif #if defined (__386BSD__) printf ("i386-pc-bsd\n"); exit (0); #endif #if defined (sequent) #if defined (i386) printf ("i386-sequent-dynix\n"); exit (0); #endif #if defined (ns32000) printf ("ns32k-sequent-dynix\n"); exit (0); #endif #endif #if defined (_SEQUENT_) struct utsname un; uname(&un); if (strncmp(un.version, "V2", 2) == 0) { printf ("i386-sequent-ptx2\n"); exit (0); } if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ printf ("i386-sequent-ptx1\n"); exit (0); } printf ("i386-sequent-ptx\n"); exit (0); #endif #if defined (vax) # if !defined (ultrix) # include # if defined (BSD) # if BSD == 43 printf ("vax-dec-bsd4.3\n"); exit (0); # else # if BSD == 199006 printf ("vax-dec-bsd4.3reno\n"); exit (0); # else printf ("vax-dec-bsd\n"); exit (0); # endif # endif # else printf ("vax-dec-bsd\n"); exit (0); # endif # else printf ("vax-dec-ultrix\n"); exit (0); # endif #endif #if defined (alliant) && defined (i860) printf ("i860-alliant-bsd\n"); exit (0); #endif exit (1); } EOF $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` && { echo "$SYSTEM_NAME"; exit; } # Apollos put the system type in the environment. test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; } # Convex versions that predate uname can use getsysinfo(1) if [ -x /usr/convex/getsysinfo ] then case `getsysinfo -f cpu_type` in c1*) echo c1-convex-bsd exit ;; c2*) if getsysinfo -f scalar_acc then echo c32-convex-bsd else echo c2-convex-bsd fi exit ;; c34*) echo c34-convex-bsd exit ;; c38*) echo c38-convex-bsd exit ;; c4*) echo c4-convex-bsd exit ;; esac fi cat >&2 < in order to provide the needed information to handle your system. config.guess timestamp = $timestamp uname -m = `(uname -m) 2>/dev/null || echo unknown` uname -r = `(uname -r) 2>/dev/null || echo unknown` uname -s = `(uname -s) 2>/dev/null || echo unknown` uname -v = `(uname -v) 2>/dev/null || echo unknown` /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` /bin/uname -X = `(/bin/uname -X) 2>/dev/null` hostinfo = `(hostinfo) 2>/dev/null` /bin/universe = `(/bin/universe) 2>/dev/null` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` /bin/arch = `(/bin/arch) 2>/dev/null` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` UNAME_MACHINE = ${UNAME_MACHINE} UNAME_RELEASE = ${UNAME_RELEASE} UNAME_SYSTEM = ${UNAME_SYSTEM} UNAME_VERSION = ${UNAME_VERSION} EOF exit 1 # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "timestamp='" # time-stamp-format: "%:y-%02m-%02d" # time-stamp-end: "'" # End: obexftp-0.23/install-sh0000755000076600000240000002202111146600664012032 00000000000000#!/bin/sh # install - install a program, script, or datafile scriptversion=2005-05-14.22 # This originates from X11R5 (mit/util/scripts/install.sh), which was # later released in X11R6 (xc/config/util/install.sh) with the # following copyright and license. # # Copyright (C) 1994 X Consortium # # Permission is hereby granted, free of charge, to any person obtaining a copy # of this software and associated documentation files (the "Software"), to # deal in the Software without restriction, including without limitation the # rights to use, copy, modify, merge, publish, distribute, sublicense, and/or # sell copies of the Software, and to permit persons to whom the Software is # furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE # X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN # AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- # TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. # # Except as contained in this notice, the name of the X Consortium shall not # be used in advertising or otherwise to promote the sale, use or other deal- # ings in this Software without prior written authorization from the X Consor- # tium. # # # FSF changes to this file are in the public domain. # # Calling this script install-sh is preferred over install.sh, to prevent # `make' implicit rules from creating a file called install from it # when there is no Makefile. # # This script is compatible with the BSD install script, but was written # from scratch. It can only install one file at a time, a restriction # shared with many OS's install programs. # set DOITPROG to echo to test this script # Don't use :- since 4.3BSD and earlier shells don't like it. doit="${DOITPROG-}" # put in absolute paths if you don't have them in your path; or use env. vars. mvprog="${MVPROG-mv}" cpprog="${CPPROG-cp}" chmodprog="${CHMODPROG-chmod}" chownprog="${CHOWNPROG-chown}" chgrpprog="${CHGRPPROG-chgrp}" stripprog="${STRIPPROG-strip}" rmprog="${RMPROG-rm}" mkdirprog="${MKDIRPROG-mkdir}" chmodcmd="$chmodprog 0755" chowncmd= chgrpcmd= stripcmd= rmcmd="$rmprog -f" mvcmd="$mvprog" src= dst= dir_arg= dstarg= no_target_directory= usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE or: $0 [OPTION]... SRCFILES... DIRECTORY or: $0 [OPTION]... -t DIRECTORY SRCFILES... or: $0 [OPTION]... -d DIRECTORIES... In the 1st form, copy SRCFILE to DSTFILE. In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. In the 4th, create DIRECTORIES. Options: -c (ignored) -d create directories instead of installing files. -g GROUP $chgrpprog installed files to GROUP. -m MODE $chmodprog installed files to MODE. -o USER $chownprog installed files to USER. -s $stripprog installed files. -t DIRECTORY install into DIRECTORY. -T report an error if DSTFILE is a directory. --help display this help and exit. --version display version info and exit. Environment variables override the default commands: CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG " while test -n "$1"; do case $1 in -c) shift continue;; -d) dir_arg=true shift continue;; -g) chgrpcmd="$chgrpprog $2" shift shift continue;; --help) echo "$usage"; exit $?;; -m) chmodcmd="$chmodprog $2" shift shift continue;; -o) chowncmd="$chownprog $2" shift shift continue;; -s) stripcmd=$stripprog shift continue;; -t) dstarg=$2 shift shift continue;; -T) no_target_directory=true shift continue;; --version) echo "$0 $scriptversion"; exit $?;; *) # When -d is used, all remaining arguments are directories to create. # When -t is used, the destination is already specified. test -n "$dir_arg$dstarg" && break # Otherwise, the last argument is the destination. Remove it from $@. for arg do if test -n "$dstarg"; then # $@ is not empty: it contains at least $arg. set fnord "$@" "$dstarg" shift # fnord fi shift # arg dstarg=$arg done break;; esac done if test -z "$1"; then if test -z "$dir_arg"; then echo "$0: no input file specified." >&2 exit 1 fi # It's OK to call `install-sh -d' without argument. # This can happen when creating conditional directories. exit 0 fi for src do # Protect names starting with `-'. case $src in -*) src=./$src ;; esac if test -n "$dir_arg"; then dst=$src src= if test -d "$dst"; then mkdircmd=: chmodcmd= else mkdircmd=$mkdirprog fi else # Waiting for this to be detected by the "$cpprog $src $dsttmp" command # might cause directories to be created, which would be especially bad # if $src (and thus $dsttmp) contains '*'. if test ! -f "$src" && test ! -d "$src"; then echo "$0: $src does not exist." >&2 exit 1 fi if test -z "$dstarg"; then echo "$0: no destination specified." >&2 exit 1 fi dst=$dstarg # Protect names starting with `-'. case $dst in -*) dst=./$dst ;; esac # If destination is a directory, append the input filename; won't work # if double slashes aren't ignored. if test -d "$dst"; then if test -n "$no_target_directory"; then echo "$0: $dstarg: Is a directory" >&2 exit 1 fi dst=$dst/`basename "$src"` fi fi # This sed command emulates the dirname command. dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'` # Make sure that the destination directory exists. # Skip lots of stat calls in the usual case. if test ! -d "$dstdir"; then defaultIFS=' ' IFS="${IFS-$defaultIFS}" oIFS=$IFS # Some sh's can't handle IFS=/ for some reason. IFS='%' set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'` shift IFS=$oIFS pathcomp= while test $# -ne 0 ; do pathcomp=$pathcomp$1 shift if test ! -d "$pathcomp"; then $mkdirprog "$pathcomp" # mkdir can fail with a `File exist' error in case several # install-sh are creating the directory concurrently. This # is OK. test -d "$pathcomp" || exit fi pathcomp=$pathcomp/ done fi if test -n "$dir_arg"; then $doit $mkdircmd "$dst" \ && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \ && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \ && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \ && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; } else dstfile=`basename "$dst"` # Make a couple of temp file names in the proper directory. dsttmp=$dstdir/_inst.$$_ rmtmp=$dstdir/_rm.$$_ # Trap to clean up those temp files at exit. trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 trap '(exit $?); exit' 1 2 13 15 # Copy the file name to the temp name. $doit $cpprog "$src" "$dsttmp" && # and set any options; do chmod last to preserve setuid bits. # # If any of these fail, we abort the whole thing. If we want to # ignore errors from any of these, just make sure not to ignore # errors from the above "$doit $cpprog $src $dsttmp" command. # { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \ && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \ && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \ && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } && # Now rename the file to the real destination. { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \ || { # The rename failed, perhaps because mv can't rename something else # to itself, or perhaps because mv is so ancient that it does not # support -f. # Now remove or move aside any old file at destination location. # We try this two ways since rm can't unlink itself on some # systems and the destination file might be busy for other # reasons. In this case, the final cleanup might fail but the new # file should still install successfully. { if test -f "$dstdir/$dstfile"; then $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \ || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \ || { echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2 (exit 1); exit 1 } else : fi } && # Now rename the file to the real destination. $doit $mvcmd "$dsttmp" "$dstdir/$dstfile" } } fi || { (exit 1); exit 1; } done # The final little trick to "correctly" pass the exit status to the exit trap. { (exit 0); exit 0 } # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-end: "$" # End: obexftp-0.23/AUTHORS0000644000076600000240000000005211146600644011074 00000000000000Christian W. Zuckschwerdt obexftp-0.23/bfb/0000777000076600000240000000000011146603263010644 500000000000000obexftp-0.23/bfb/bfb.c0000644000076600000240000003205711146600644011464 00000000000000/** \file bfb/bfb.c BFB transport encapsulation (used for Siemens mobile equipment). ObexFTP library - language bindings for OBEX file transfer. Copyright (c) 2002-2007 Christian W. Zuckschwerdt ObexFTP is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with ObexFTP. If not, see . */ #ifdef HAVE_CONFIG_H #include #endif #include #include #include #include #include #ifdef HAVE_SYS_TIME_H #include #endif /* htons */ #ifdef _WIN32 #include #include /* for endianess */ #else #include #endif #include "crc.h" #include "bfb.h" #include /* Provide convenience macros for handling structure * fields through their offsets. */ #define STRUCT_OFFSET(struct_type, member) \ ((uint64_t) ((char*) &((struct_type*) 0)->member)) #define STRUCT_MEMBER_P(struct_p, struct_offset) \ ((void *) ((char*) (struct_p) + (uint64_t) (struct_offset))) #define STRUCT_MEMBER(member_type, struct_p, struct_offset) \ (*(member_type*) STRUCT_MEMBER_P ((struct_p), (struct_offset))) /* mobile need little-endianess always */ /* Solaris: _LITTLE_ENDIAN / _BIG_ENDIAN */ /* Linux: */ #if (BYTE_ORDER == LITTLE_ENDIAN) || defined (_LITTLE_ENDIAN) #define htoms(A) (A) #define htoml(A) (A) #define mtohs(A) (A) #define mtohl(A) (A) #elif (BYTE_ORDER == BIG_ENDIAN) || defined (_BIG_ENDIAN) #define htoms(A) ((((uint16_t)(A) & 0xff00) >> 8) | \ (((uint16_t)(A) & 0x00ff) << 8)) #define htoml(A) ((((uint32_t)(A) & 0xff000000) >> 24) | \ (((uint32_t)(A) & 0x00ff0000) >> 8) | \ (((uint32_t)(A) & 0x0000ff00) << 8) | \ (((uint32_t)(A) & 0x000000ff) << 24)) #define mtohs htoms #define mtohl htoml #else #error "BYTE_ORDER needs to be either BIG_ENDIAN or LITTLE_ENDIAN." #endif /** Returns the whole buffer folded with xor. */ uint8_t bfb_checksum(uint8_t *data, int len) { int i; uint8_t chk = 0; for (i=0; i < len; i++) chk ^= data[i]; return chk; } /** Stuff data frame into serial cable encapsulation. buffer needs to be of at leaset len+7 size Type 0x01: "prepare" command. Type 0x02: first transmission in a row. Type 0x03: continued transmission. seq needs to be incremented afterwards. */ int bfb_stuff_data(uint8_t *buffer, uint8_t type, uint8_t *data, uint16_t len, uint8_t seq) { int i; union { uint16_t value; uint8_t bytes[2]; } fcs; /* special case: "attention" packet */ if (type == 1) { buffer[0] = 0x01; buffer[1] = ~buffer[0]; return 2; } /* error */ if (type != 2 && type != 3) { buffer[0] = 0x00; /* just terminate the buffer */ return 0; } buffer[0] = type; buffer[1] = ~buffer[0]; buffer[2] = seq; fcs.value = htons(len); buffer[3] = fcs.bytes[0]; buffer[4] = fcs.bytes[1]; /* copy data */ memcpy(&buffer[5], data, len); /* gen CRC */ fcs.value = INIT_FCS; for (i=2; i < len+5; i++) { fcs.value = irda_fcs(fcs.value, buffer[i]); } fcs.value = ~fcs.value; /* append CRC to packet */ /* fcs.value = htons(fcs.value); */ buffer[len+5] = fcs.bytes[0]; buffer[len+6] = fcs.bytes[1]; return len+7; } /** Send a cmd, subcmd packet, add chk (no parameters). */ int bfb_write_subcmd(fd_t fd, uint8_t type, uint8_t subtype) { uint8_t buffer[2]; buffer[0] = subtype; buffer[1] = bfb_checksum(buffer, 1); return bfb_write_packets(fd, type, buffer, 2); } /** Send a cmd, subcmd packet. */ int bfb_write_subcmd0(fd_t fd, uint8_t type, uint8_t subtype) { return bfb_write_packets(fd, type, &subtype, 1); } /** Send a cmd, subcmd, data packet. */ int bfb_write_subcmd8(fd_t fd, uint8_t type, uint8_t subtype, uint8_t p1) { uint8_t buffer[2]; buffer[0] = subtype; buffer[1] = p1; return bfb_write_packets(fd, type, buffer, 2); } /** Send a cmd, subcmd packet, add chk (one word parameter). */ int bfb_write_subcmd1(fd_t fd, uint8_t type, uint8_t subtype, uint16_t p1) { uint8_t buffer[4]; buffer[0] = subtype; p1 = htoms(p1); /* mobile need little-endianess always */ buffer[1] = STRUCT_MEMBER(uint8_t, &p1, 0); buffer[2] = STRUCT_MEMBER(uint8_t, &p1, 1); buffer[3] = bfb_checksum(buffer, 3); DEBUG(3, "buf: %x %x %x %x\n", buffer[0], buffer[1], buffer[2], buffer[3]); return bfb_write_packets(fd, type, buffer, 4); } /** Send a cmd, subcmd packet, add chk (two word parameter). */ int bfb_write_subcmd2(fd_t fd, uint8_t type, uint8_t subtype, uint16_t p1, uint16_t p2) { uint8_t buffer[6]; buffer[0] = subtype; p1 = htoms(p1); /* mobile need little-endianess always */ buffer[1] = STRUCT_MEMBER(uint8_t, &p1, 0); buffer[2] = STRUCT_MEMBER(uint8_t, &p1, 1); p2 = htoms(p2); /* mobile need little-endianess always */ buffer[3] = STRUCT_MEMBER(uint8_t, &p2, 0); buffer[4] = STRUCT_MEMBER(uint8_t, &p2, 1); buffer[5] = bfb_checksum(buffer, 5); DEBUG(3, "buf: %x %x %x %x %x %x\n", buffer[0], buffer[1], buffer[2], buffer[3], buffer[4], buffer[5]); return bfb_write_packets(fd, type, buffer, 6); } /** Send a cmd, subcmd packet, add chk (three word parameter). */ int bfb_write_subcmd3(fd_t fd, uint8_t type, uint8_t subtype, uint16_t p1, uint16_t p2, uint16_t p3) { uint8_t buffer[8]; buffer[0] = subtype; p1 = htoms(p1); /* mobile need little-endianess always */ buffer[1] = STRUCT_MEMBER(uint8_t, &p1, 0); buffer[2] = STRUCT_MEMBER(uint8_t, &p1, 1); p2 = htoms(p2); /* mobile need little-endianess always */ buffer[3] = STRUCT_MEMBER(uint8_t, &p2, 0); buffer[4] = STRUCT_MEMBER(uint8_t, &p2, 1); p3 = htoms(p3); /* mobile need little-endianess always */ buffer[5] = STRUCT_MEMBER(uint8_t, &p3, 0); buffer[6] = STRUCT_MEMBER(uint8_t, &p3, 1); buffer[7] = bfb_checksum(buffer, 7); DEBUG(3, "buf: %x %x %x %x %x %x %x %x\n", buffer[0], buffer[1], buffer[2], buffer[3], buffer[4], buffer[5], buffer[6], buffer[7]); return bfb_write_packets(fd, type, buffer, 8); } /** Send a cmd, subcmd packet, add long, word parameter. */ int bfb_write_subcmd_lw(fd_t fd, uint8_t type, uint8_t subtype, uint32_t p1, uint16_t p2) { uint8_t buffer[8]; buffer[0] = subtype; p1 = htoml(p1); /* mobile need little-endianess always */ buffer[1] = STRUCT_MEMBER(uint8_t, &p1, 0); buffer[2] = STRUCT_MEMBER(uint8_t, &p1, 1); buffer[3] = STRUCT_MEMBER(uint8_t, &p1, 2); buffer[4] = STRUCT_MEMBER(uint8_t, &p1, 3); p2 = htoms(p2); /* mobile need little-endianess always */ buffer[5] = STRUCT_MEMBER(uint8_t, &p2, 0); buffer[6] = STRUCT_MEMBER(uint8_t, &p2, 1); buffer[7] = bfb_checksum(buffer, 7); DEBUG(3, "buf: %02x %02x %02x %02x %02x %02x %02x\n", buffer[0], buffer[1], buffer[2], buffer[3], buffer[4], buffer[5], buffer[6]); return bfb_write_packets(fd, type, buffer, 7); /* no chk? */ } /** Send actual packets. Patch from Jorge Ventura to handle EAGAIN from write. */ int bfb_write_packets(fd_t fd, uint8_t type, uint8_t *buffer, int length) { bfb_frame_t *frame; int i; int l; struct timeval timeout; fd_set fds; int rc; #ifdef _WIN32 DWORD actual; #else int actual; #endif #ifdef _WIN32 return_val_if_fail (fd != INVALID_HANDLE_VALUE, FALSE); #else return_val_if_fail (fd > 0, FALSE); #endif /* select setup */ FD_ZERO(&fds); FD_SET(fd, &fds); /* alloc frame buffer */ frame = malloc((length > MAX_PACKET_DATA ? MAX_PACKET_DATA : length) + sizeof (bfb_frame_t)); if (frame == NULL) return -1; for(i=0; i MAX_PACKET_DATA) l = MAX_PACKET_DATA; frame->type = type; frame->len = l; frame->chk = frame->type ^ frame->len; memcpy(frame->payload, &buffer[i], l); /* Set time limit. */ timeout.tv_sec = 1; timeout.tv_usec = 0; /* actual = bfb_io_write(fd, frame, l + sizeof (bfb_frame_t)); */ rc = select(fd+1, NULL, &fds, NULL, &timeout); if ( rc > 0) { #ifdef _WIN32 if(!WriteFile(fd, frame, l + sizeof (bfb_frame_t), &actual, NULL)) DEBUG(2, "%s() Write error: %ld\n", __func__, actual); DEBUG(3, "%s() Wrote %ld bytes (expected %d)\n", __func__, actual, l + sizeof (bfb_frame_t)); #else actual = write(fd, frame, l + sizeof (bfb_frame_t)); DEBUG(3, "%s() Wrote %d bytes (expected %d)\n", __func__, actual, l + sizeof (bfb_frame_t)); // delay for some USB-serial coverters (Gerhard Reithofer) // usleep(1000); // there has to be a better way #endif if (actual < 0 || actual < l + (int) sizeof (bfb_frame_t)) { DEBUG(1, "%s() Write failed\n", __func__); free(frame); return -1; } } else { /* ! rc > 0*/ DEBUG(1, "%s() Select failed\n", __func__); free(frame); return -1; } } free(frame); return i / MAX_PACKET_DATA; } /** Stuff data into packet buffers and send all packets. */ int bfb_send_data(fd_t fd, uint8_t type, uint8_t *data, uint16_t length, uint8_t seq) { uint8_t *buffer; int actual; buffer = malloc(length + 7); if (buffer == NULL) return -1; actual = bfb_stuff_data(buffer, type, data, length, seq); DEBUG(3, "%s() Stuffed %d bytes\n", __func__, actual); actual = bfb_write_packets(fd, BFB_FRAME_DATA, buffer, actual); DEBUG(3, "%s() Wrote %d packets\n", __func__, actual); free(buffer); return actual; } /** Retrieve actual packets. */ /*@null@*/ bfb_frame_t *bfb_read_packets(uint8_t *buffer, int *length) { bfb_frame_t *frame; int l; DEBUG(3, "%s() \n", __func__); if (*length < 0) { DEBUG(1, "%s() Wrong length?\n", __func__); return NULL; } if (*length == 0) { DEBUG(1, "%s() No packet?\n", __func__); return NULL; } if (*length < (int) sizeof(bfb_frame_t)) { DEBUG(1, "%s() Short packet?\n", __func__); return NULL; } /* temp frame */ frame = (bfb_frame_t *)buffer; if ((frame->type ^ frame->len) != frame->chk) { DEBUG(1, "%s() Header error?\n", __func__); DEBUGBUFFER(buffer, *length); return NULL; } if (*length < frame->len + (int) sizeof(bfb_frame_t)) { DEBUG(2, "%s() Need more data?\n", __func__); return NULL; } /* copy frame from buffer */ l = sizeof(bfb_frame_t) + frame->len; frame = malloc(l); if (frame == NULL) return NULL; memcpy(frame, buffer, l); /* remove frame from buffer */ *length -= l; memmove(buffer, &buffer[l], *length); DEBUG(3, "%s() Packet 0x%02x (%d bytes)\n", __func__, frame->type, frame->len); return frame; } /** Append BFB frame to a data buffer. */ int bfb_assemble_data(bfb_data_t **data, int *size, int *len, bfb_frame_t *frame) { bfb_data_t *tmp; int l; DEBUG(3, "%s() \n", __func__); if (frame->type != BFB_FRAME_DATA) { DEBUG(1, "%s() Wrong frame type (0x%02x)?\n", __func__, frame->type); return -1; } /* temp data */ tmp = (bfb_data_t *)frame->payload; if ((*len == 0) && (tmp->cmd == BFB_DATA_ACK)) { DEBUG(3, "%s() Skipping ack\n", __func__); return 0; } /* copy frame from buffer */ DEBUG(3, "%s() data: %d + frame: %d\n", __func__, *len, frame->len); l = *len + frame->len; if (l > *size) { DEBUG(1, "%s() data buffer to small, realloc'ing\n", __func__); *data = realloc(*data, l); *size = l; } /* memcpy(ret, *data, *len); */ memcpy(&((uint8_t *)*data)[*len], frame->payload, frame->len); /* free(*data); */ *len = l; return 1; } /** Check if data buffer is complete and valid. */ int bfb_check_data(bfb_data_t *data, int len) { int i; union { uint16_t value; uint8_t bytes[2]; } l; DEBUG(3, "%s() \n", __func__); if (data == NULL) return -1; if (len < (int) sizeof(bfb_data_t)) return 0; if (data->cmd != (uint8_t)~data->chk) { DEBUG(1, "%s() Broken data? 0x%02x, 0x%02x\n", __func__, data->cmd, (uint8_t)~data->chk); DEBUGBUFFER(data, len); } DEBUG(3, "%s() cmd: 0x%02x, chk: 0x%02x, seq: %d\n", __func__, data->cmd, data->chk, data->seq); if ((data->cmd != BFB_DATA_FIRST) && (data->cmd != BFB_DATA_NEXT)) { DEBUG(1, "%s() Wrong data type (0x%02x)?\n", __func__, data->cmd); return -1; } l.bytes[0] = data->len0; l.bytes[1] = data->len1; l.value = htons(l.value); DEBUG(3, "%s() fragment size %d, payload %d of indicated %d\n", __func__, len, len-sizeof(bfb_data_t), l.value); if (len-(int)sizeof(bfb_data_t) < (int)(l.value) + /*crc*/ 2) return 0; /* check CRC */ l.value = INIT_FCS; for (i=2; i < len-2; i++) { l.value = irda_fcs(l.value, ((uint8_t *)data)[i]); } l.value = ~l.value; if ((((uint8_t *)data)[len-2] != l.bytes[0]) || (((uint8_t *)data)[len-1] != l.bytes[1])) { DEBUG(1, "%s() CRC-ERROR %02x %02x vs %02x %02x\n", __func__, ((uint8_t *)data)[len-2], ((uint8_t *)data)[len-1], l.bytes[0], l.bytes[1]); } DEBUG(2, "%s() data ready!\n", __func__); return 1; } obexftp-0.23/bfb/bfb_io.c0000644000076600000240000003545511146600644012160 00000000000000/** \file bfb/bfb_io.c BFB transport encapsulation (for Siemens mobile equipment). ObexFTP library - language bindings for OBEX file transfer. Copyright (c) 2002 Christian W. Zuckschwerdt ObexFTP is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with ObexFTP. If not, see . */ #ifdef HAVE_CONFIG_H #include #endif #define _GNU_SOURCE #include #include #include #include #include #include #ifdef HAVE_SYS_SELECT_H #include #endif #ifdef HAVE_SYS_TIME_H #include #endif #ifdef _WIN32 #include #define sleep(n) Sleep(n*1000) #else #include #include #endif #include "bfb.h" #include "bfb_io.h" #include /* Write out an IO buffer */ int bfb_io_write(fd_t fd, const uint8_t *buffer, int length) { #ifdef _WIN32 DWORD bytes; DEBUG(3, "%s() WriteFile\n", __func__); if (fd == INVALID_HANDLE_VALUE) { DEBUG(1, "%s() Error INVALID_HANDLE_VALUE\n", __func__); return -1; } if(!WriteFile(fd, buffer, length, &bytes, NULL)) DEBUG(1, "%s() Write error: %ld\n", __func__, bytes); return bytes; #else int bytes; if (fd <= 0) { DEBUG(1, "%s() Error file handle invalid\n", __func__); return -1; } bytes = write(fd, buffer, length); if (bytes < length) DEBUG(1, "%s() Error short write (%d / %d)\n", __func__, bytes, length); if (bytes < 0) DEBUG(1, "%s() Error writing to port\n", __func__); return bytes; #endif } /* Read an answer to an IO buffer of max length bytes */ int bfb_io_read(fd_t fd, uint8_t *buffer, int length, int timeout) { #ifdef _WIN32 DWORD bytes; DEBUG(3, "%s() ReadFile\n", __func__); return_val_if_fail (fd != INVALID_HANDLE_VALUE, -1); if (!ReadFile(fd, buffer, length, &bytes, NULL)) { DEBUG(2, "%s() Read error: %ld\n", __func__, bytes); } return bytes; #else struct timeval time; fd_set fdset; int actual; return_val_if_fail (fd > 0, -1); time.tv_sec = timeout; time.tv_usec = 0; FD_ZERO(&fdset); FD_SET(fd, &fdset); if(select(fd+1, &fdset, NULL, NULL, &time)) { actual = read(fd, buffer, length); if (actual < 0) { DEBUG(2, "%s() Read error: %d\n", __func__, actual); } return actual; } else { DEBUG(1, "%s() No data (timeout: %d)\n", __func__, timeout); return 0; } #endif } /** Read (repeatedly) from fd until a timeout or an error is encountered. */ static int bfb_io_read_all(int fd, uint8_t *buffer, int length, int timeout) { int actual; int pos = 0; for (;;) { actual = bfb_io_read(fd, &buffer[pos], length - pos, timeout); if (actual < 0) return actual; if (actual == 0) return pos; pos += actual; } } /* Send an BFB init command an check for a valid answer frame */ int bfb_io_init(fd_t fd) { int actual; int tries=3; bfb_frame_t *frame = NULL; uint8_t rspbuf[200]; int rsplen; uint8_t init_magic = BFB_CONNECT_HELLO; uint8_t init_magic2 = BFB_CONNECT_HELLO_ACK; /* uint8_t speed115200[] = {0xc0,'1','1','5','2','0','0',0x13,0xd2,0x2b}; uint8_t sifs[] = {'a','t','^','s','i','f','s',0x13}; */ #ifdef _WIN32 return_val_if_fail (fd != INVALID_HANDLE_VALUE, FALSE); #else return_val_if_fail (fd > 0, FALSE); #endif while (!frame && tries-- > 0) { actual = bfb_write_packets (fd, BFB_FRAME_CONNECT, &init_magic, sizeof(init_magic)); DEBUG(2, "%s() Wrote %d packets\n", __func__, actual); if (actual < 1) { DEBUG(1, "BFB port error\n"); return FALSE; } rsplen = 0; while (!frame && actual > 0) { actual = bfb_io_read(fd, &rspbuf[rsplen], sizeof(rspbuf)-rsplen, 2); DEBUG(2, "%s() Read %d bytes\n", __func__, actual); if (actual < 0) { DEBUG(1, "BFB read error\n"); return FALSE; } if (actual == 0) { DEBUG(1, "BFB read timeout\n"); } rsplen += actual; frame = bfb_read_packets(rspbuf, &rsplen); DEBUG(2, "%s() Unstuffed, %d bytes remaining\n", __func__, rsplen); } } if (frame == NULL) { DEBUG(1, "BFB init error\n"); return FALSE; } DEBUG(2, "BFB init ok.\n"); if ((frame->len == 2) && (frame->payload[0] == init_magic) && (frame->payload[1] == init_magic2)) { free(frame); return TRUE; } DEBUG(1, "Error doing BFB init (%d, %x %x)\n", frame->len, frame->payload[0], frame->payload[1]); free(frame); return FALSE; } /** Send an AT-command and expect an answer of one or more lines. \note Start your command with "AT" and terminate it with "\r" (CR). \note The expected lines are the the echo, one optional information response and a final result code of "OK" or "ERROR". */ int do_at_cmd(fd_t fd, const char *cmd, char *rspbuf, int rspbuflen) { #ifdef _WIN32 DWORD actual; #else int actual; #endif char *answer = NULL; int answer_size; char tmpbuf[100] = {0,}; int total = 0; int cmdlen; return_val_if_fail (cmd != NULL, -1); cmdlen = strlen(cmd); rspbuf[0] = 0; DEBUG(3, "%s() Sending %d: %s\n", __func__, cmdlen, cmd); /* Write command */ if (bfb_io_write(fd, cmd, cmdlen) < cmdlen) return -1; actual = 1; while (actual > 0) { actual = bfb_io_read(fd, &tmpbuf[total], sizeof(tmpbuf) - total, 2); if (actual < 0) /* error checking */ return actual; total += actual; tmpbuf[total] = '\0'; /* terminate the string, always */ DEBUG(3, "%s() tmpbuf=%d: %s\n", __func__, total, tmpbuf); /* Answer not found within 100 bytes. Cancel */ if (total >= sizeof(tmpbuf)) return -1; /* Remove first line (echo), then search final result code */ for (answer = tmpbuf; answer && *answer ; ) { while ((*answer != '\r') && (*answer != '\n') && (*answer != '\0')) answer++; while ((*answer == '\r') || (*answer == '\n')) answer++; if (!strncmp(answer, "OK\r", 3) || !strncmp(answer, "ERROR\r", 6) || !strncmp(answer, "OK\n", 3) || !strncmp(answer, "ERROR\n", 6)) { actual = 0; /* we are done */ } } } /* try hard to discard remaing CR/LF */ if (total > 0 && tmpbuf[total-1] != '\n') actual = bfb_io_read(fd, &tmpbuf[total], sizeof(tmpbuf) - total, 2); /* Remove echo and trailing CRs */ answer = strchr(tmpbuf, '\r'); if (!answer) /* no echo found */ return -1; while (*answer == '\r' || *answer == '\n') answer++; answer_size = 0; while (answer[answer_size] != '\0' && answer[answer_size] != '\r' && answer[answer_size] != '\n') answer_size++; DEBUG(3, "%s() Answer (size=%d): %s\n", __func__, answer_size, answer); if( (answer_size) >= rspbuflen ) return -1; strncpy(rspbuf, answer, answer_size); rspbuf[answer_size] = '\0'; return 0; } /* close the connection */ void bfb_io_close(fd_t fd, int force) { DEBUG(3, "%s()\n", __func__); #ifdef _WIN32 return_if_fail (fd != INVALID_HANDLE_VALUE); #else return_if_fail (fd > 0); #endif /* we don't know if it's a BFB type link, don't send */ /* bfb_write_at(fd, "at^sbfb=0\r"); */ if(force) { /* Send a break to get out of OBEX-mode */ #ifdef _WIN32 if(SetCommBreak(fd) != TRUE) { #elif defined(TCSBRKP) if(ioctl(fd, TCSBRKP, 0) < 0) { #elif defined(TCSBRK) if(ioctl(fd, TCSBRK, 0) < 0) { #else if(tcsendbreak(fd, 0) < 0) { #endif DEBUG(1, "Unable to send break!\n"); } sleep(1); } #ifdef _WIN32 CloseHandle(fd); #else close(fd); #endif } /* Init the phone and set it in BFB-mode */ /* Returns fd or -1 on failure */ fd_t bfb_io_open(const char *ttyname, enum trans_type *typeinfo) { char rspbuf[200]; int actual; #ifdef _WIN32 HANDLE ttyfd; DCB dcb; COMMTIMEOUTS ctTimeOuts; return_val_if_fail (ttyname != NULL, INVALID_HANDLE_VALUE); DEBUG(3, "%s() CreateFile\n", __func__); ttyfd = CreateFile (ttyname, GENERIC_READ | GENERIC_WRITE, 0, NULL, OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL, NULL); if (ttyfd == INVALID_HANDLE_VALUE) { DEBUG(1, "Error: CreateFile()\n"); return INVALID_HANDLE_VALUE; } if(!GetCommState(ttyfd, &dcb)) { DEBUG(1, "Error: GetCommState()\n"); } dcb.fBinary = TRUE; dcb.BaudRate = CBR_57600; dcb.fParity = FALSE; dcb.Parity = NOPARITY; dcb.ByteSize = 8; dcb.StopBits = ONESTOPBIT; dcb.fInX = FALSE; dcb.fOutX = FALSE; dcb.fOutxDsrFlow = FALSE; dcb.fOutxCtsFlow = FALSE; dcb.fDtrControl = DTR_CONTROL_ENABLE; dcb.fRtsControl = RTS_CONTROL_ENABLE; if(!SetCommState(ttyfd, &dcb)) DEBUG(1, "SetCommState failed\n"); ctTimeOuts.ReadIntervalTimeout = 250; ctTimeOuts.ReadTotalTimeoutMultiplier = 1; /* no good with big buffer */ ctTimeOuts.ReadTotalTimeoutConstant = 500; ctTimeOuts.WriteTotalTimeoutMultiplier = 1; ctTimeOuts.WriteTotalTimeoutConstant = 5000; if(!SetCommTimeouts(ttyfd, &ctTimeOuts)) { DEBUG(1, "Error: SetCommTimeouts()\n"); } Sleep(500); /* flush all pending input */ if(!PurgeComm(ttyfd, PURGE_RXABORT | PURGE_RXCLEAR)) { DEBUG(1, "Error: PurgeComm\n"); } #else int ttyfd; struct termios oldtio, newtio; return_val_if_fail (ttyname != NULL, -1); DEBUG(2, "%s() \n", __func__); if( (ttyfd = open(ttyname, O_RDWR | O_NONBLOCK | O_NOCTTY, 0)) < 0 ) { DEBUG(1, "Can' t open tty\n"); return -1; } (void) tcgetattr(ttyfd, &oldtio); memset(&newtio, 0, sizeof(newtio)); newtio.c_cflag = B57600 | CS8 | CREAD; newtio.c_iflag = IGNPAR; newtio.c_oflag = 0; (void) tcflush(ttyfd, TCIFLUSH); (void) tcsetattr(ttyfd, TCSANOW, &newtio); #endif /* Can't just try that now, as it will break some phones. */ //if (bfb_io_init (ttyfd)) { // DEBUG(1, "Already in BFB mode.\n"); // goto bfbmode; //} /* check if we are in transparent OBEX or AT mode: */ /* send an ABORT (0xFF) with cleverly embedded AT command. */ /* look for valid OBEX frame (OK=0xA0, BADREQ=0xC0, or alike) */ DEBUG(1, "Checking for transparent OBEX mode\n"); actual = bfb_io_write(ttyfd, "\xFF\x00\x08\xCBATZ\r", 8); if (actual == 8) { DEBUG(3, "Write ok, reading back\n"); actual = bfb_io_read_all(ttyfd, rspbuf, sizeof(rspbuf), 2); if (actual >= 3 && rspbuf[actual-1] == actual) { DEBUG(3, "Received %02X OBEX frame\n", (uint8_t)rspbuf[0]); DEBUG(1, "Transparent OBEX\n"); *typeinfo = TT_GENERIC; return ttyfd; } else if (actual >= 3 && !strncmp(rspbuf, "ATZ", 3)) { DEBUG(1, "AT mode\n"); } } if(do_at_cmd(ttyfd, "ATZ\r", rspbuf, sizeof(rspbuf)) < 0) { DEBUG(1, "Comm-error or already in BFB mode\n"); #ifdef _WIN32 goto bfbmode; #else newtio.c_cflag = B19200 | CS8 | CREAD; (void) tcflush(ttyfd, TCIFLUSH); (void) tcsetattr(ttyfd, TCSANOW, &newtio); if(do_at_cmd(ttyfd, "ATZ\r", rspbuf, sizeof(rspbuf)) < 0) { DEBUG(1, "Comm-error or already in BFB mode\n"); goto bfbmode; } #endif } if(strcasecmp("OK", rspbuf) != 0) { DEBUG(1, "Error doing ATZ (%s)\n", rspbuf); goto err; } if(do_at_cmd(ttyfd, "AT+GMI\r", rspbuf, sizeof(rspbuf)) < 0) { DEBUG(1, "Comm-error\n"); goto err; } DEBUG(1, "AT+GMI: %s\n", rspbuf); if(strncasecmp("ERICSSON", rspbuf, 8) == 0 || strncasecmp("SONY ERICSSON", rspbuf, 13) == 0) { DEBUG(1, "Ericsson detected\n"); goto ericsson; } if(strncasecmp("MOTOROLA", rspbuf, 8) == 0 || /* is this needed? */ strstr(rspbuf, "Motorola")) { DEBUG(1, "Motorola detected\n"); goto motorola; } if(strncasecmp("SIEMENS", rspbuf, 7) != 0) { DEBUG(1, "No Siemens detected. Trying generic.\n"); goto generic; } if(do_at_cmd(ttyfd, "AT^SIFS\r", rspbuf, sizeof(rspbuf)) < 0) { DEBUG(1, "Comm-error\n"); goto err; } if(strcasecmp("^SIFS: WIRE", rspbuf) != 0 /* DCA-500, DCA-510 */ && strcasecmp("^SIFS: BLUE", rspbuf) != 0 && strcasecmp("^SIFS: IRDA", rspbuf) != 0 && strcasecmp("^SIFS: USB", rspbuf) != 0) { /* DCA-540 */ DEBUG(1, "Unknown connection doing AT^SIFS (%s), continuing anyway ...\n", rspbuf); } /* prefer connection without BFB */ if(do_at_cmd(ttyfd, "AT^SBFB=?\r", rspbuf, sizeof(rspbuf)) < 0) { DEBUG(1, "Comm-error\n"); goto err; } if(!strncasecmp("^SBFB: (0-3", rspbuf, 11) != 0) { DEBUG(1, "New plain Siemens protocol. (%s)\n", rspbuf); goto newsiemens; } DEBUG(1, "Old BFB Siemens protocol. (%s)\n", rspbuf); if(do_at_cmd(ttyfd, "AT^SBFB=1\r", rspbuf, sizeof(rspbuf)) < 0) { DEBUG(1, "Comm-error\n"); goto err; } if(strcasecmp("OK", rspbuf) != 0) { DEBUG(1, "Error doing AT^SBFB=1 (%s)\n", rspbuf); goto err; } sleep(1); /* synch a bit */ bfbmode: #ifndef _WIN32 newtio.c_cflag = B57600 | CS8 | CREAD; (void) tcflush(ttyfd, TCIFLUSH); (void) tcsetattr(ttyfd, TCSANOW, &newtio); #endif if (! bfb_io_init (ttyfd)) { /* well there may be some garbage -- just try again */ if (! bfb_io_init (ttyfd)) { DEBUG(1, "Couldn't init BFB mode.\n"); goto err; } } *typeinfo = TT_BFB; return ttyfd; ericsson: if(do_at_cmd(ttyfd, "AT*EOBEX\r", rspbuf, sizeof(rspbuf)) < 0) { DEBUG(1, "Comm-error\n"); goto err; } if(strcasecmp("CONNECT", rspbuf) != 0) { DEBUG(1, "Error doing AT*EOBEX (%s)\n", rspbuf); goto err; } *typeinfo = TT_ERICSSON; return ttyfd; motorola: if(do_at_cmd(ttyfd, "AT+MODE=22\r", rspbuf, sizeof(rspbuf)) < 0) { DEBUG(1, "Comm-error\n"); goto err; } if(strcasecmp("CONNECT", rspbuf) != 0 || /* is this needed? */ strcasecmp("OK", rspbuf) != 0) { DEBUG(1, "Error doing AT+MODE=22 (%s)\n", rspbuf); goto err; } *typeinfo = TT_MOTOROLA; return ttyfd; newsiemens: /* ^SBFB=3 only works when switching from RCCP(0) to OBEX(3) * but the phone may be in GIPSY(2) mode. * No need to implement BFC(1) mode if we only want to run OBEX. */ if(do_at_cmd(ttyfd, "AT^SQWE?\r", rspbuf, sizeof(rspbuf)) < 0) { DEBUG(1, "Comm-error\n"); goto err; } if (strcasecmp("^SQWE:0",rspbuf) != 0) { if(do_at_cmd(ttyfd, "AT^SQWE=0\r", rspbuf, sizeof(rspbuf)) < 0) { DEBUG(1, "Comm-error\n"); goto err; } if(strcasecmp("OK", rspbuf) != 0) { DEBUG(1, "Error doing AT^SQWE=0 (%s)\n", rspbuf); goto err; } sleep(1); } if(do_at_cmd(ttyfd, "AT^SQWE=3\r", rspbuf, sizeof(rspbuf)) < 0) { DEBUG(1, "Comm-error\n"); goto err; } if(strcasecmp("OK", rspbuf) != 0) { DEBUG(1, "Error doing AT^SQWE=3 (%s)\n", rspbuf); goto err; } sleep(1); /* synch a bit */ *typeinfo = TT_SIEMENS; return ttyfd; generic: if(do_at_cmd(ttyfd, "AT+CPROT=0\r", rspbuf, sizeof(rspbuf)) < 0) { DEBUG(1, "Comm-error\n"); goto err; } if(strcasecmp("CONNECT", rspbuf) != 0) { DEBUG(1, "Error doing AT+CPROT=0 (%s)\n", rspbuf); goto err; } *typeinfo = TT_GENERIC; return ttyfd; err: bfb_io_close(ttyfd, TRUE); #ifdef _WIN32 return INVALID_HANDLE_VALUE; #else return -1; #endif } obexftp-0.23/bfb/crc.h0000644000076600000240000000171611146600644011505 00000000000000/********************************************************************* * * Filename: crc.h * Version: * Description: CRC routines * Status: Experimental. * Author: Dag Brattli * Created at: Mon Aug 4 20:40:53 1997 * Modified at: Sun May 2 20:25:23 1999 * Modified by: Dag Brattli * ********************************************************************/ #ifndef IRDA_CRC_H #define IRDA_CRC_H #include #define INIT_FCS 0xffff /* Initial FCS value */ #define GOOD_FCS 0xf0b8 /* Good final FCS value */ extern uint16_t const irda_crc16_table[]; /* Recompute the FCS with one more character appended. */ static inline uint16_t irda_fcs(uint16_t fcs, uint8_t c) { return (((fcs) >> 8) ^ irda_crc16_table[((fcs) ^ (c)) & 0xff]); } /* Recompute the FCS with len bytes appended. */ unsigned short crc_calc( uint16_t fcs, uint8_t const *buf, int len); #endif obexftp-0.23/bfb/crc.c0000644000076600000240000000613611146600644011501 00000000000000/********************************************************************* * * Filename: crc.c * Version: 0.1 * Description: CRC calculation routines * Status: Experimental. * Author: Dag Brattli * Created at: Mon Aug 4 20:40:53 1997 * Modified at: Sun May 2 20:28:08 1999 * Modified by: Dag Brattli * Sources: ppp.c by Michael Callahan * Al Longyear * ********************************************************************/ #include "crc.h" /* * This mysterious table is just the CRC of each possible byte. It can be * computed using the standard bit-at-a-time methods. The polynomial can * be seen in entry 128, 0x8408. This corresponds to x^0 + x^5 + x^12. * Add the implicit x^16, and you have the standard CRC-CCITT. */ uint16_t const irda_crc16_table[256] = { 0x0000, 0x1189, 0x2312, 0x329b, 0x4624, 0x57ad, 0x6536, 0x74bf, 0x8c48, 0x9dc1, 0xaf5a, 0xbed3, 0xca6c, 0xdbe5, 0xe97e, 0xf8f7, 0x1081, 0x0108, 0x3393, 0x221a, 0x56a5, 0x472c, 0x75b7, 0x643e, 0x9cc9, 0x8d40, 0xbfdb, 0xae52, 0xdaed, 0xcb64, 0xf9ff, 0xe876, 0x2102, 0x308b, 0x0210, 0x1399, 0x6726, 0x76af, 0x4434, 0x55bd, 0xad4a, 0xbcc3, 0x8e58, 0x9fd1, 0xeb6e, 0xfae7, 0xc87c, 0xd9f5, 0x3183, 0x200a, 0x1291, 0x0318, 0x77a7, 0x662e, 0x54b5, 0x453c, 0xbdcb, 0xac42, 0x9ed9, 0x8f50, 0xfbef, 0xea66, 0xd8fd, 0xc974, 0x4204, 0x538d, 0x6116, 0x709f, 0x0420, 0x15a9, 0x2732, 0x36bb, 0xce4c, 0xdfc5, 0xed5e, 0xfcd7, 0x8868, 0x99e1, 0xab7a, 0xbaf3, 0x5285, 0x430c, 0x7197, 0x601e, 0x14a1, 0x0528, 0x37b3, 0x263a, 0xdecd, 0xcf44, 0xfddf, 0xec56, 0x98e9, 0x8960, 0xbbfb, 0xaa72, 0x6306, 0x728f, 0x4014, 0x519d, 0x2522, 0x34ab, 0x0630, 0x17b9, 0xef4e, 0xfec7, 0xcc5c, 0xddd5, 0xa96a, 0xb8e3, 0x8a78, 0x9bf1, 0x7387, 0x620e, 0x5095, 0x411c, 0x35a3, 0x242a, 0x16b1, 0x0738, 0xffcf, 0xee46, 0xdcdd, 0xcd54, 0xb9eb, 0xa862, 0x9af9, 0x8b70, 0x8408, 0x9581, 0xa71a, 0xb693, 0xc22c, 0xd3a5, 0xe13e, 0xf0b7, 0x0840, 0x19c9, 0x2b52, 0x3adb, 0x4e64, 0x5fed, 0x6d76, 0x7cff, 0x9489, 0x8500, 0xb79b, 0xa612, 0xd2ad, 0xc324, 0xf1bf, 0xe036, 0x18c1, 0x0948, 0x3bd3, 0x2a5a, 0x5ee5, 0x4f6c, 0x7df7, 0x6c7e, 0xa50a, 0xb483, 0x8618, 0x9791, 0xe32e, 0xf2a7, 0xc03c, 0xd1b5, 0x2942, 0x38cb, 0x0a50, 0x1bd9, 0x6f66, 0x7eef, 0x4c74, 0x5dfd, 0xb58b, 0xa402, 0x9699, 0x8710, 0xf3af, 0xe226, 0xd0bd, 0xc134, 0x39c3, 0x284a, 0x1ad1, 0x0b58, 0x7fe7, 0x6e6e, 0x5cf5, 0x4d7c, 0xc60c, 0xd785, 0xe51e, 0xf497, 0x8028, 0x91a1, 0xa33a, 0xb2b3, 0x4a44, 0x5bcd, 0x6956, 0x78df, 0x0c60, 0x1de9, 0x2f72, 0x3efb, 0xd68d, 0xc704, 0xf59f, 0xe416, 0x90a9, 0x8120, 0xb3bb, 0xa232, 0x5ac5, 0x4b4c, 0x79d7, 0x685e, 0x1ce1, 0x0d68, 0x3ff3, 0x2e7a, 0xe70e, 0xf687, 0xc41c, 0xd595, 0xa12a, 0xb0a3, 0x8238, 0x93b1, 0x6b46, 0x7acf, 0x4854, 0x59dd, 0x2d62, 0x3ceb, 0x0e70, 0x1ff9, 0xf78f, 0xe606, 0xd49d, 0xc514, 0xb1ab, 0xa022, 0x92b9, 0x8330, 0x7bc7, 0x6a4e, 0x58d5, 0x495c, 0x3de3, 0x2c6a, 0x1ef1, 0x0f78 }; unsigned short crc_calc(uint16_t fcs, uint8_t const *buf, int len) { while (len--) fcs = irda_fcs(fcs, *buf++); return fcs; } obexftp-0.23/bfb/Makefile.in0000644000076600000240000004124711146600664012637 00000000000000# Makefile.in generated by automake 1.9.6 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = .. am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = bfb DIST_COMMON = $(bfbinclude_HEADERS) $(srcdir)/Makefile.am \ $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/iconv.m4 \ $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/acinclude.m4 \ $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bfbincludedir)" libLTLIBRARIES_INSTALL = $(INSTALL) LTLIBRARIES = $(lib_LTLIBRARIES) libbfb_la_DEPENDENCIES = am_libbfb_la_OBJECTS = bfb.lo crc.lo bfb_io.lo libbfb_la_OBJECTS = $(am_libbfb_la_OBJECTS) DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) depcomp = $(SHELL) $(top_srcdir)/depcomp am__depfiles_maybe = depfiles COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ $(AM_LDFLAGS) $(LDFLAGS) -o $@ SOURCES = $(libbfb_la_SOURCES) DIST_SOURCES = $(libbfb_la_SOURCES) bfbincludeHEADERS_INSTALL = $(INSTALL_HEADER) HEADERS = $(bfbinclude_HEADERS) ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ BFB_VERSION = @BFB_VERSION@ BLUETOOTH_CFLAGS = @BLUETOOTH_CFLAGS@ BLUETOOTH_LIBS = @BLUETOOTH_LIBS@ BUILD_DOCS_FALSE = @BUILD_DOCS_FALSE@ BUILD_DOCS_TRUE = @BUILD_DOCS_TRUE@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DSYMUTIL = @DSYMUTIL@ ECHO = @ECHO@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ ENABLE_PERL_FALSE = @ENABLE_PERL_FALSE@ ENABLE_PERL_TRUE = @ENABLE_PERL_TRUE@ ENABLE_PYTHON_FALSE = @ENABLE_PYTHON_FALSE@ ENABLE_PYTHON_TRUE = @ENABLE_PYTHON_TRUE@ ENABLE_RUBY_FALSE = @ENABLE_RUBY_FALSE@ ENABLE_RUBY_TRUE = @ENABLE_RUBY_TRUE@ ENABLE_SWIG_FALSE = @ENABLE_SWIG_FALSE@ ENABLE_SWIG_TRUE = @ENABLE_SWIG_TRUE@ ENABLE_TCL_FALSE = @ENABLE_TCL_FALSE@ ENABLE_TCL_TRUE = @ENABLE_TCL_TRUE@ EXEEXT = @EXEEXT@ EXTRA_LIBS = @EXTRA_LIBS@ F77 = @F77@ FFLAGS = @FFLAGS@ GREP = @GREP@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LDFLAGS = @LDFLAGS@ LIBICONV = @LIBICONV@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LN_S = @LN_S@ LTLIBICONV = @LTLIBICONV@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MULTICOBEX_VERSION = @MULTICOBEX_VERSION@ NMEDIT = @NMEDIT@ OBEXFTP_VERSION = @OBEXFTP_VERSION@ OBJEXT = @OBJEXT@ OPENOBEX_CFLAGS = @OPENOBEX_CFLAGS@ OPENOBEX_LIBS = @OPENOBEX_LIBS@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ PKG_CONFIG = @PKG_CONFIG@ PYTHON = @PYTHON@ PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@ PYTHON_PLATFORM = @PYTHON_PLATFORM@ PYTHON_PREFIX = @PYTHON_PREFIX@ PYTHON_VERSION = @PYTHON_VERSION@ RANLIB = @RANLIB@ REQUIRES = @REQUIRES@ RUBY = @RUBY@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ SWIG = @SWIG@ SWIG_LIB = @SWIG_LIB@ TCLSH = @TCLSH@ VERSION = @VERSION@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_F77 = @ac_ct_F77@ ac_perl_enabled = @ac_perl_enabled@ ac_python_enabled = @ac_python_enabled@ ac_ruby_enabled = @ac_ruby_enabled@ ac_tcl_enabled = @ac_tcl_enabled@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ pkgpyexecdir = @pkgpyexecdir@ pkgpythondir = @pkgpythondir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ pyexecdir = @pyexecdir@ pythondir = @pythondir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ lib_LTLIBRARIES = libbfb.la AM_CFLAGS = -I$(top_srcdir)/includes bfbincludedir = $(includedir)/bfb libbfb_la_SOURCES = bfb.c bfb.h \ crc.c crc.h \ bfb_io.c bfb_io.h bfbinclude_HEADERS = bfb.h bfb_io.h libbfb_la_LDFLAGS = -no-undefined \ -version-info $(BFB_VERSION) libbfb_la_LIBADD = @EXTRA_LIBS@ all: all-am .SUFFIXES: .SUFFIXES: .c .lo .o .obj $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu bfb/Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --gnu bfb/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh install-libLTLIBRARIES: $(lib_LTLIBRARIES) @$(NORMAL_INSTALL) test -z "$(libdir)" || $(mkdir_p) "$(DESTDIR)$(libdir)" @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ if test -f $$p; then \ f=$(am__strip_dir) \ echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \ $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \ else :; fi; \ done uninstall-libLTLIBRARIES: @$(NORMAL_UNINSTALL) @set -x; list='$(lib_LTLIBRARIES)'; for p in $$list; do \ p=$(am__strip_dir) \ echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \ $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \ done clean-libLTLIBRARIES: -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ test "$$dir" != "$$p" || dir=.; \ echo "rm -f \"$${dir}/so_locations\""; \ rm -f "$${dir}/so_locations"; \ done libbfb.la: $(libbfb_la_OBJECTS) $(libbfb_la_DEPENDENCIES) $(LINK) -rpath $(libdir) $(libbfb_la_LDFLAGS) $(libbfb_la_OBJECTS) $(libbfb_la_LIBADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/bfb.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/bfb_io.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/crc.Plo@am__quote@ .c.o: @am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ @am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c $< .c.obj: @am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ @am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` .c.lo: @am__fastdepCC_TRUE@ if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ @am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool uninstall-info-am: install-bfbincludeHEADERS: $(bfbinclude_HEADERS) @$(NORMAL_INSTALL) test -z "$(bfbincludedir)" || $(mkdir_p) "$(DESTDIR)$(bfbincludedir)" @list='$(bfbinclude_HEADERS)'; for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ f=$(am__strip_dir) \ echo " $(bfbincludeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(bfbincludedir)/$$f'"; \ $(bfbincludeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(bfbincludedir)/$$f"; \ done uninstall-bfbincludeHEADERS: @$(NORMAL_UNINSTALL) @list='$(bfbinclude_HEADERS)'; for p in $$list; do \ f=$(am__strip_dir) \ echo " rm -f '$(DESTDIR)$(bfbincludedir)/$$f'"; \ rm -f "$(DESTDIR)$(bfbincludedir)/$$f"; \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ mkid -fID $$unique tags: TAGS TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique; \ fi ctags: CTAGS CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(CTAGS_ARGS)$$tags$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ list='$(DISTFILES)'; for file in $$list; do \ case $$file in \ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ esac; \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ dir="/$$dir"; \ $(mkdir_p) "$(distdir)$$dir"; \ else \ dir=''; \ fi; \ if test -d $$d/$$file; then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(LTLIBRARIES) $(HEADERS) installdirs: for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bfbincludedir)"; do \ test -z "$$dir" || $(mkdir_p) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \ mostlyclean-am distclean: distclean-am -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-libtool distclean-tags dvi: dvi-am dvi-am: html: html-am info: info-am info-am: install-data-am: install-bfbincludeHEADERS install-exec-am: install-libLTLIBRARIES install-info: install-info-am install-man: installcheck-am: maintainer-clean: maintainer-clean-am -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-bfbincludeHEADERS uninstall-info-am \ uninstall-libLTLIBRARIES .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ clean-libLTLIBRARIES clean-libtool ctags distclean \ distclean-compile distclean-generic distclean-libtool \ distclean-tags distdir dvi dvi-am html html-am info info-am \ install install-am install-bfbincludeHEADERS install-data \ install-data-am install-exec install-exec-am install-info \ install-info-am install-libLTLIBRARIES install-man \ install-strip installcheck installcheck-am installdirs \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ pdf pdf-am ps ps-am tags uninstall uninstall-am \ uninstall-bfbincludeHEADERS uninstall-info-am \ uninstall-libLTLIBRARIES # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: obexftp-0.23/bfb/Makefile.am0000644000076600000240000000050511146600644012614 00000000000000lib_LTLIBRARIES = libbfb.la AM_CFLAGS = -I$(top_srcdir)/includes bfbincludedir = $(includedir)/bfb libbfb_la_SOURCES = bfb.c bfb.h \ crc.c crc.h \ bfb_io.c bfb_io.h bfbinclude_HEADERS = bfb.h bfb_io.h libbfb_la_LDFLAGS = -no-undefined \ -version-info $(BFB_VERSION) libbfb_la_LIBADD = @EXTRA_LIBS@ obexftp-0.23/bfb/bfb_io.h0000644000076600000240000000351111146600644012151 00000000000000/** \file bfb/bfb_io.h BFB protocol IO layer. ObexFTP library - language bindings for OBEX file transfer. Copyright (c) 2002 Christian W. Zuckschwerdt ObexFTP is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with ObexFTP. If not, see . */ #ifndef BFB_IO_H #define BFB_IO_H #include enum trans_type { TT_BFB, /* use a bfb transport */ TT_ERICSSON, /* just custom init and teardown */ TT_SIEMENS, /* new siemens, like ericsson above */ TT_MOTOROLA, /* experimental motorola support */ TT_GENERIC /* should work on most phones */ }; #ifdef __cplusplus extern "C" { #endif /* Write out a BFB buffer */ int bfb_io_write(fd_t fd, const uint8_t *buffer, int length); /* Read in a BFB answer */ int bfb_io_read(fd_t fd, uint8_t *buffer, int length, int timeout); /* Send an BFB init command an check for a valid answer frame */ int bfb_io_init(fd_t fd); /* Send an AT-command an expect 1 line back as answer */ int do_at_cmd(fd_t fd, const char *cmd, char *rspbuf, int rspbuflen); /* close the connection */ void bfb_io_close(fd_t fd, int force); /* Init the phone and set it in BFB-mode */ /* Returns fd or -1 on failure */ fd_t bfb_io_open(const char *ttyname, enum trans_type *typeinfo); #ifdef __cplusplus } #endif #endif /* BFB_IO_H */ obexftp-0.23/bfb/bfb.h0000644000076600000240000000676311146600644011476 00000000000000/** \file bfb/bfb.h BFB transport encapsulation (used for Siemens mobile equipment). ObexFTP library - language bindings for OBEX file transfer. Copyright (c) 2002-2007 Christian W. Zuckschwerdt ObexFTP is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with ObexFTP. If not, see . */ #ifndef BFB_H #define BFB_H #include #ifdef __cplusplus extern "C" { #endif #ifdef _WIN32 #include typedef HANDLE fd_t; #else typedef int fd_t; #endif #pragma pack(1) typedef struct { uint8_t type; uint8_t len; uint8_t chk; uint8_t payload[0]; /* ... up to 32 */ /* uint8_t xor; ? */ } bfb_frame_t; #pragma pack() #pragma pack(1) typedef struct { uint8_t cmd; uint8_t chk; uint8_t seq; uint8_t len0; uint8_t len1; uint8_t data[0]; /* ... up to 518 ? */ /* uint16_t crc; */ } bfb_data_t; #pragma pack() #define BFB_FRAME_CONNECT 0x02 /* ^B */ #define BFB_FRAME_INTERFACE 0x01 /* ^A */ #define BFB_FRAME_KEY 0x05 /* ^E */ #define BFB_FRAME_AT 0x06 /* ^F */ #define BFB_FRAME_EEPROM 0x14 /* ^N */ #define BFB_FRAME_DATA 0x16 /* ^P */ #define BFB_CONNECT_HELLO 0x14 /* ^N */ #define BFB_CONNECT_HELLO_ACK 0xaa #define BFB_KEY_PRESS 0x06 /* ^F */ #define MAX_PACKET_DATA 32 #define BFB_DATA_ACK 0x01 /* aka ok */ #define BFB_DATA_FIRST 0x02 /* first transmission in a row */ #define BFB_DATA_NEXT 0x03 /* continued transmission */ uint8_t bfb_checksum(uint8_t *data, int len); int bfb_write_subcmd(fd_t fd, uint8_t type, uint8_t subtype); int bfb_write_subcmd0(fd_t fd, uint8_t type, uint8_t subtype); int bfb_write_subcmd8(fd_t fd, uint8_t type, uint8_t subtype, uint8_t p1); int bfb_write_subcmd1(fd_t fd, uint8_t type, uint8_t subtype, uint16_t p1); int bfb_write_subcmd2(fd_t fd, uint8_t type, uint8_t subtype, uint16_t p1, uint16_t p2); int bfb_write_subcmd3(fd_t fd, uint8_t type, uint8_t subtype, uint16_t p1, uint16_t p2, uint16_t p3); int bfb_write_subcmd_lw(fd_t fd, uint8_t type, uint8_t subtype, uint32_t p1, uint16_t p2); int bfb_stuff_data(/*@out@*/ uint8_t *buffer, uint8_t type, uint8_t *data, uint16_t len, uint8_t seq); int bfb_write_packets(fd_t fd, uint8_t type, uint8_t *buffer, int length); #define bfb_write_at(fd, data) \ bfb_write_packets(fd, BFB_FRAME_AT, data, strlen(data)) #define bfb_write_key(fd, data) \ bfb_write_subcmd8(fd, BFB_FRAME_KEY, BFB_KEY_PRESS, data) int bfb_send_data(fd_t fd, uint8_t type, uint8_t *data, uint16_t length, uint8_t seq); #define bfb_send_ack(fd) \ bfb_send_data(fd, BFB_DATA_ACK, NULL, 0, 0) #define bfb_send_first(fd, data, length) \ bfb_send_data(fd, BFB_DATA_FIRST, data, length, 0) #define bfb_send_next(fd, data, length, seq) \ bfb_send_data(fd, BFB_DATA_NEXT, data, length, seq) /*@null@*/ bfb_frame_t * bfb_read_packets(uint8_t *buffer, int *length); int bfb_assemble_data(/*@null@*/ /*@out@*/ bfb_data_t **data, int *size, int *len, bfb_frame_t *frame); int bfb_check_data(bfb_data_t *data, int len); #ifdef __cplusplus } #endif #endif /* BFB_H */ obexftp-0.23/COPYING0000644000076600000240000004312211146600665011067 00000000000000 GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation's software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Library General Public License instead.) You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things. To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software. Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations. Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all. The precise terms and conditions for copying, distribution and modification follow. GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The "Program", below, refers to any such program or work, and a "work based on the Program" means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term "modification".) Each licensee is addressed as "you". Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does. 1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change. b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License. c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following: a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.) The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation. 10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found. Copyright (C) This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Also add information on how to contact you by electronic and paper mail. If the program is interactive, make it output a short notice like this when it starts in an interactive mode: Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. This is free software, and you are welcome to redistribute it under certain conditions; type `show c' for details. The hypothetical commands `show w' and `show c' should show the appropriate parts of the General Public License. Of course, the commands you use may be called something other than `show w' and `show c'; they could even be mouse-clicks or menu items--whatever suits your program. You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the program, if necessary. Here is a sample; alter the names: Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision' (which makes passes at compilers) written by James Hacker. , 1 April 1989 Ty Coon, President of Vice This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Library General Public License instead of this License. obexftp-0.23/Doxyfile.developer0000644000076600000240000002346111146600644013527 00000000000000# Doxyfile 1.4.7 #--------------------------------------------------------------------------- # Project related configuration options #--------------------------------------------------------------------------- PROJECT_NAME = ObexFTP PROJECT_NUMBER = 0.22 OUTPUT_DIRECTORY = doc/handbook CREATE_SUBDIRS = NO OUTPUT_LANGUAGE = English BRIEF_MEMBER_DESC = YES REPEAT_BRIEF = YES ABBREVIATE_BRIEF = "The $name class" \ "The $name widget" \ "The $name file" \ is \ provides \ specifies \ contains \ represents \ a \ an \ the ALWAYS_DETAILED_SEC = NO INLINE_INHERITED_MEMB = NO FULL_PATH_NAMES = YES STRIP_FROM_PATH = STRIP_FROM_INC_PATH = SHORT_NAMES = NO JAVADOC_AUTOBRIEF = YES MULTILINE_CPP_IS_BRIEF = NO DETAILS_AT_TOP = NO INHERIT_DOCS = YES SEPARATE_MEMBER_PAGES = NO TAB_SIZE = 8 ALIASES = OPTIMIZE_OUTPUT_FOR_C = YES OPTIMIZE_OUTPUT_JAVA = NO BUILTIN_STL_SUPPORT = NO DISTRIBUTE_GROUP_DOC = NO SUBGROUPING = YES #--------------------------------------------------------------------------- # Build related configuration options #--------------------------------------------------------------------------- EXTRACT_ALL = YES EXTRACT_PRIVATE = YES EXTRACT_STATIC = YES EXTRACT_LOCAL_CLASSES = YES EXTRACT_LOCAL_METHODS = NO HIDE_UNDOC_MEMBERS = NO HIDE_UNDOC_CLASSES = NO HIDE_FRIEND_COMPOUNDS = NO HIDE_IN_BODY_DOCS = NO INTERNAL_DOCS = NO CASE_SENSE_NAMES = YES HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES INLINE_INFO = YES SORT_MEMBER_DOCS = YES SORT_BRIEF_DOCS = NO SORT_BY_SCOPE_NAME = NO GENERATE_TODOLIST = YES GENERATE_TESTLIST = YES GENERATE_BUGLIST = YES GENERATE_DEPRECATEDLIST= YES ENABLED_SECTIONS = MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES SHOW_DIRECTORIES = NO FILE_VERSION_FILTER = #--------------------------------------------------------------------------- # configuration options related to warning and progress messages #--------------------------------------------------------------------------- QUIET = NO WARNINGS = YES WARN_IF_UNDOCUMENTED = YES WARN_IF_DOC_ERROR = YES WARN_NO_PARAMDOC = NO WARN_FORMAT = "$file:$line: $text" WARN_LOGFILE = #--------------------------------------------------------------------------- # configuration options related to the input files #--------------------------------------------------------------------------- INPUT = bfb multicobex obexftp includes Doxyfile.coverpage FILE_PATTERNS = *.c \ *.cc \ *.cxx \ *.cpp \ *.c++ \ *.d \ *.java \ *.ii \ *.ixx \ *.ipp \ *.i++ \ *.inl \ *.h \ *.hh \ *.hxx \ *.hpp \ *.h++ \ *.idl \ *.odl \ *.cs \ *.php \ *.php3 \ *.inc \ *.m \ *.mm \ *.dox \ *.py \ *.C \ *.CC \ *.C++ \ *.II \ *.I++ \ *.H \ *.HH \ *.H++ \ *.CS \ *.PHP \ *.PHP3 \ *.M \ *.MM \ *.PY RECURSIVE = NO EXCLUDE = EXCLUDE_SYMLINKS = NO EXCLUDE_PATTERNS = *_private.h EXAMPLE_PATH = EXAMPLE_PATTERNS = * EXAMPLE_RECURSIVE = NO IMAGE_PATH = INPUT_FILTER = FILTER_PATTERNS = FILTER_SOURCE_FILES = NO #--------------------------------------------------------------------------- # configuration options related to source browsing #--------------------------------------------------------------------------- SOURCE_BROWSER = NO INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES REFERENCED_BY_RELATION = NO REFERENCES_RELATION = NO REFERENCES_LINK_SOURCE = YES USE_HTAGS = NO VERBATIM_HEADERS = NO #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- ALPHABETICAL_INDEX = NO COLS_IN_ALPHA_INDEX = 5 IGNORE_PREFIX = #--------------------------------------------------------------------------- # configuration options related to the HTML output #--------------------------------------------------------------------------- GENERATE_HTML = YES HTML_OUTPUT = html HTML_FILE_EXTENSION = .html HTML_HEADER = HTML_FOOTER = HTML_STYLESHEET = HTML_ALIGN_MEMBERS = YES GENERATE_HTMLHELP = NO CHM_FILE = HHC_LOCATION = GENERATE_CHI = NO BINARY_TOC = NO TOC_EXPAND = NO DISABLE_INDEX = NO ENUM_VALUES_PER_LINE = 4 GENERATE_TREEVIEW = NO TREEVIEW_WIDTH = 250 #--------------------------------------------------------------------------- # configuration options related to the LaTeX output #--------------------------------------------------------------------------- GENERATE_LATEX = NO LATEX_OUTPUT = latex LATEX_CMD_NAME = latex MAKEINDEX_CMD_NAME = makeindex COMPACT_LATEX = NO PAPER_TYPE = a4wide EXTRA_PACKAGES = LATEX_HEADER = PDF_HYPERLINKS = NO USE_PDFLATEX = NO LATEX_BATCHMODE = NO LATEX_HIDE_INDICES = NO #--------------------------------------------------------------------------- # configuration options related to the RTF output #--------------------------------------------------------------------------- GENERATE_RTF = NO RTF_OUTPUT = rtf COMPACT_RTF = NO RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = RTF_EXTENSIONS_FILE = #--------------------------------------------------------------------------- # configuration options related to the man page output #--------------------------------------------------------------------------- GENERATE_MAN = NO MAN_OUTPUT = man MAN_EXTENSION = .3 MAN_LINKS = NO #--------------------------------------------------------------------------- # configuration options related to the XML output #--------------------------------------------------------------------------- GENERATE_XML = NO XML_OUTPUT = xml XML_SCHEMA = XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- GENERATE_AUTOGEN_DEF = NO #--------------------------------------------------------------------------- # configuration options related to the Perl module output #--------------------------------------------------------------------------- GENERATE_PERLMOD = NO PERLMOD_LATEX = NO PERLMOD_PRETTY = YES PERLMOD_MAKEVAR_PREFIX = #--------------------------------------------------------------------------- # Configuration options related to the preprocessor #--------------------------------------------------------------------------- ENABLE_PREPROCESSING = YES MACRO_EXPANSION = NO EXPAND_ONLY_PREDEF = NO SEARCH_INCLUDES = YES INCLUDE_PATH = INCLUDE_FILE_PATTERNS = PREDEFINED = EXPAND_AS_DEFINED = SKIP_FUNCTION_MACROS = YES #--------------------------------------------------------------------------- # Configuration::additions related to external references #--------------------------------------------------------------------------- TAGFILES = GENERATE_TAGFILE = ALLEXTERNALS = NO EXTERNAL_GROUPS = YES PERL_PATH = /usr/bin/perl #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- CLASS_DIAGRAMS = YES HIDE_UNDOC_RELATIONS = YES HAVE_DOT = NO CLASS_GRAPH = YES COLLABORATION_GRAPH = YES GROUP_GRAPHS = YES UML_LOOK = NO TEMPLATE_RELATIONS = NO INCLUDE_GRAPH = YES INCLUDED_BY_GRAPH = YES CALL_GRAPH = NO CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = YES DIRECTORY_GRAPH = YES DOT_IMAGE_FORMAT = png DOT_PATH = DOTFILE_DIRS = DOT_TRANSPARENT = NO DOT_MULTI_TARGETS = NO GENERATE_LEGEND = YES DOT_CLEANUP = YES #--------------------------------------------------------------------------- # Configuration::additions related to the search engine #--------------------------------------------------------------------------- SEARCHENGINE = NO obexftp-0.23/multicobex/0000777000076600000240000000000011146603263012266 500000000000000obexftp-0.23/multicobex/multi_cobex_private.h0000644000076600000240000000345111146600644016422 00000000000000/** \file multicobex/multi_cobex_private.h Detect, initiate and run OBEX over custom serial port protocols (Siemens, Ericsson, New-Siemens, Motorola, Generic). ObexFTP library - language bindings for OBEX file transfer. Copyright (c) 2002-2005 Christian W. Zuckschwerdt ObexFTP is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with ObexFTP. If not, see . */ #ifndef MULTICOBEX_PRIVATE_H #define MULTICOBEX_PRIVATE_H #include #define SERPORT "/dev/ttyS0" #define RECVSIZE 500 /* Recieve up to this much from socket */ enum cobex_type { CT_BFB, /* use a bfb transport */ CT_ERICSSON, /* just custom init and teardown */ CT_SIEMENS, /* new siemens, like ericsson above */ CT_MOTOROLA, /* experimental motorola support */ CT_GENERIC /* should work on most phones */ }; typedef struct { enum cobex_type type; /* Type of connected mobile */ char *tty; #ifdef _WIN32 HANDLE fd; /* Socket descriptor */ #else int fd; /* Socket descriptor */ #endif uint8_t recv[RECVSIZE]; /* Buffer socket input */ int recv_len; uint8_t seq; bfb_data_t *data_buf; /* assembled obex frames */ int data_size; /* max buffer size */ int data_len; /* filled buffer length */ } cobex_t; #endif /* MULTICOBEX_PRIVATE_H */ obexftp-0.23/multicobex/Makefile.in0000644000076600000240000004171011146600665014255 00000000000000# Makefile.in generated by automake 1.9.6 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = .. am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = multicobex DIST_COMMON = $(multicobexinclude_HEADERS) $(srcdir)/Makefile.am \ $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/iconv.m4 \ $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/acinclude.m4 \ $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; am__installdirs = "$(DESTDIR)$(libdir)" \ "$(DESTDIR)$(multicobexincludedir)" libLTLIBRARIES_INSTALL = $(INSTALL) LTLIBRARIES = $(lib_LTLIBRARIES) libmulticobex_la_DEPENDENCIES = ../bfb/libbfb.la am_libmulticobex_la_OBJECTS = multi_cobex.lo libmulticobex_la_OBJECTS = $(am_libmulticobex_la_OBJECTS) DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) depcomp = $(SHELL) $(top_srcdir)/depcomp am__depfiles_maybe = depfiles COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ $(AM_LDFLAGS) $(LDFLAGS) -o $@ SOURCES = $(libmulticobex_la_SOURCES) DIST_SOURCES = $(libmulticobex_la_SOURCES) multicobexincludeHEADERS_INSTALL = $(INSTALL_HEADER) HEADERS = $(multicobexinclude_HEADERS) ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ BFB_VERSION = @BFB_VERSION@ BLUETOOTH_CFLAGS = @BLUETOOTH_CFLAGS@ BLUETOOTH_LIBS = @BLUETOOTH_LIBS@ BUILD_DOCS_FALSE = @BUILD_DOCS_FALSE@ BUILD_DOCS_TRUE = @BUILD_DOCS_TRUE@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DSYMUTIL = @DSYMUTIL@ ECHO = @ECHO@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ ENABLE_PERL_FALSE = @ENABLE_PERL_FALSE@ ENABLE_PERL_TRUE = @ENABLE_PERL_TRUE@ ENABLE_PYTHON_FALSE = @ENABLE_PYTHON_FALSE@ ENABLE_PYTHON_TRUE = @ENABLE_PYTHON_TRUE@ ENABLE_RUBY_FALSE = @ENABLE_RUBY_FALSE@ ENABLE_RUBY_TRUE = @ENABLE_RUBY_TRUE@ ENABLE_SWIG_FALSE = @ENABLE_SWIG_FALSE@ ENABLE_SWIG_TRUE = @ENABLE_SWIG_TRUE@ ENABLE_TCL_FALSE = @ENABLE_TCL_FALSE@ ENABLE_TCL_TRUE = @ENABLE_TCL_TRUE@ EXEEXT = @EXEEXT@ EXTRA_LIBS = @EXTRA_LIBS@ F77 = @F77@ FFLAGS = @FFLAGS@ GREP = @GREP@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LDFLAGS = @LDFLAGS@ LIBICONV = @LIBICONV@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LN_S = @LN_S@ LTLIBICONV = @LTLIBICONV@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MULTICOBEX_VERSION = @MULTICOBEX_VERSION@ NMEDIT = @NMEDIT@ OBEXFTP_VERSION = @OBEXFTP_VERSION@ OBJEXT = @OBJEXT@ OPENOBEX_CFLAGS = @OPENOBEX_CFLAGS@ OPENOBEX_LIBS = @OPENOBEX_LIBS@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ PKG_CONFIG = @PKG_CONFIG@ PYTHON = @PYTHON@ PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@ PYTHON_PLATFORM = @PYTHON_PLATFORM@ PYTHON_PREFIX = @PYTHON_PREFIX@ PYTHON_VERSION = @PYTHON_VERSION@ RANLIB = @RANLIB@ REQUIRES = @REQUIRES@ RUBY = @RUBY@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ SWIG = @SWIG@ SWIG_LIB = @SWIG_LIB@ TCLSH = @TCLSH@ VERSION = @VERSION@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_F77 = @ac_ct_F77@ ac_perl_enabled = @ac_perl_enabled@ ac_python_enabled = @ac_python_enabled@ ac_ruby_enabled = @ac_ruby_enabled@ ac_tcl_enabled = @ac_tcl_enabled@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ pkgpyexecdir = @pkgpyexecdir@ pkgpythondir = @pkgpythondir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ pyexecdir = @pyexecdir@ pythondir = @pythondir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ lib_LTLIBRARIES = libmulticobex.la AM_CFLAGS = @OPENOBEX_CFLAGS@ \ -I$(top_srcdir) \ -I$(top_srcdir)/includes multicobexincludedir = $(includedir)/multicobex libmulticobex_la_SOURCES = multi_cobex.c multi_cobex.h \ multi_cobex_private.h multicobexinclude_HEADERS = multi_cobex.h libmulticobex_la_LDFLAGS = -no-undefined \ -version-info $(MULTICOBEX_VERSION) libmulticobex_la_LIBADD = @OPENOBEX_LIBS@ \ ../bfb/libbfb.la \ @EXTRA_LIBS@ all: all-am .SUFFIXES: .SUFFIXES: .c .lo .o .obj $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu multicobex/Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --gnu multicobex/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh install-libLTLIBRARIES: $(lib_LTLIBRARIES) @$(NORMAL_INSTALL) test -z "$(libdir)" || $(mkdir_p) "$(DESTDIR)$(libdir)" @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ if test -f $$p; then \ f=$(am__strip_dir) \ echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \ $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \ else :; fi; \ done uninstall-libLTLIBRARIES: @$(NORMAL_UNINSTALL) @set -x; list='$(lib_LTLIBRARIES)'; for p in $$list; do \ p=$(am__strip_dir) \ echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \ $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \ done clean-libLTLIBRARIES: -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ test "$$dir" != "$$p" || dir=.; \ echo "rm -f \"$${dir}/so_locations\""; \ rm -f "$${dir}/so_locations"; \ done libmulticobex.la: $(libmulticobex_la_OBJECTS) $(libmulticobex_la_DEPENDENCIES) $(LINK) -rpath $(libdir) $(libmulticobex_la_LDFLAGS) $(libmulticobex_la_OBJECTS) $(libmulticobex_la_LIBADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/multi_cobex.Plo@am__quote@ .c.o: @am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ @am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c $< .c.obj: @am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ @am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` .c.lo: @am__fastdepCC_TRUE@ if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ @am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool uninstall-info-am: install-multicobexincludeHEADERS: $(multicobexinclude_HEADERS) @$(NORMAL_INSTALL) test -z "$(multicobexincludedir)" || $(mkdir_p) "$(DESTDIR)$(multicobexincludedir)" @list='$(multicobexinclude_HEADERS)'; for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ f=$(am__strip_dir) \ echo " $(multicobexincludeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(multicobexincludedir)/$$f'"; \ $(multicobexincludeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(multicobexincludedir)/$$f"; \ done uninstall-multicobexincludeHEADERS: @$(NORMAL_UNINSTALL) @list='$(multicobexinclude_HEADERS)'; for p in $$list; do \ f=$(am__strip_dir) \ echo " rm -f '$(DESTDIR)$(multicobexincludedir)/$$f'"; \ rm -f "$(DESTDIR)$(multicobexincludedir)/$$f"; \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ mkid -fID $$unique tags: TAGS TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique; \ fi ctags: CTAGS CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(CTAGS_ARGS)$$tags$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ list='$(DISTFILES)'; for file in $$list; do \ case $$file in \ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ esac; \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ dir="/$$dir"; \ $(mkdir_p) "$(distdir)$$dir"; \ else \ dir=''; \ fi; \ if test -d $$d/$$file; then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(LTLIBRARIES) $(HEADERS) installdirs: for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(multicobexincludedir)"; do \ test -z "$$dir" || $(mkdir_p) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \ mostlyclean-am distclean: distclean-am -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-libtool distclean-tags dvi: dvi-am dvi-am: html: html-am info: info-am info-am: install-data-am: install-multicobexincludeHEADERS install-exec-am: install-libLTLIBRARIES install-info: install-info-am install-man: installcheck-am: maintainer-clean: maintainer-clean-am -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-info-am uninstall-libLTLIBRARIES \ uninstall-multicobexincludeHEADERS .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ clean-libLTLIBRARIES clean-libtool ctags distclean \ distclean-compile distclean-generic distclean-libtool \ distclean-tags distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-exec \ install-exec-am install-info install-info-am \ install-libLTLIBRARIES install-man \ install-multicobexincludeHEADERS install-strip installcheck \ installcheck-am installdirs maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-compile \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags uninstall uninstall-am uninstall-info-am \ uninstall-libLTLIBRARIES uninstall-multicobexincludeHEADERS # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: obexftp-0.23/multicobex/Makefile.am0000644000076600000240000000072411146600644014241 00000000000000lib_LTLIBRARIES = libmulticobex.la AM_CFLAGS = @OPENOBEX_CFLAGS@ \ -I$(top_srcdir) \ -I$(top_srcdir)/includes multicobexincludedir = $(includedir)/multicobex libmulticobex_la_SOURCES = multi_cobex.c multi_cobex.h \ multi_cobex_private.h multicobexinclude_HEADERS = multi_cobex.h libmulticobex_la_LDFLAGS = -no-undefined \ -version-info $(MULTICOBEX_VERSION) libmulticobex_la_LIBADD = @OPENOBEX_LIBS@ \ ../bfb/libbfb.la \ @EXTRA_LIBS@ obexftp-0.23/multicobex/multi_cobex.c0000644000076600000240000002021211146600644014655 00000000000000/** \file multicobex/multi_cobex.c Detect, initiate and run OBEX over custom serial port protocols (Siemens, Ericsson, New-Siemens, Motorola, Generic). ObexFTP library - language bindings for OBEX file transfer. Copyright (c) 2002-2007 Christian W. Zuckschwerdt ObexFTP is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with ObexFTP. If not, see . */ #ifdef HAVE_CONFIG_H #include #endif #define _GNU_SOURCE #include #include #include #include #include #ifdef HAVE_SYS_SELECT_H #include #endif #include #include #ifdef HAVE_SYS_TIME_H #include #endif #ifdef _WIN32 #include #define sleep(t) Sleep((t) * 1000) #define usleep(t) Sleep((t) < 500 ? 1 : ((t) + 500) / 1000); #else #include #include #endif #include #include "multi_cobex.h" #include "multi_cobex_private.h" #include #include #include static void cobex_cleanup(cobex_t *c, int force) { return_if_fail (c != NULL); #ifdef _WIN32 return_if_fail (c->fd != INVALID_HANDLE_VALUE); #else return_if_fail (c->fd > 0); #endif if (c->type == CT_BFB) { /* needed to leave transparent OBEX(3) mode * and enter RCCP(0) mode. * DCA-540 needs cable replug, probably problem * with the linux driver (linux-2.6.17.13) */ bfb_write_at(c->fd, "AT^SBFB=0\r"); sleep(1); bfb_io_write(c->fd, "+++", 3); sleep(1); bfb_io_write(c->fd,"\r", 1); } bfb_io_close(c->fd, force); #ifdef _WIN32 c->fd = INVALID_HANDLE_VALUE; #else c->fd = -1; #endif } /** Called from OBEX-lib to set up a connection. */ int cobex_connect(obex_t *self, void *data) { cobex_t *c; enum trans_type typeinfo; return_val_if_fail (self != NULL, -1); return_val_if_fail (data != NULL, -1); c = (cobex_t *) data; DEBUG(3, "%s() \n", __func__); c->fd = bfb_io_open(c->tty, &typeinfo); DEBUG(3, "%s() bfb_io_open returned %d, %d\n", __func__, c->fd, typeinfo); switch (typeinfo) { case TT_BFB: c->type = CT_BFB; break; case TT_ERICSSON: c->type = CT_ERICSSON; break; case TT_SIEMENS: c->type = CT_SIEMENS; break; case TT_MOTOROLA: c->type = CT_MOTOROLA; break; case TT_GENERIC: c->type = CT_GENERIC; break; default: c->type = 0; /* invalid */ return -1; } #ifdef _WIN32 if(c->fd == INVALID_HANDLE_VALUE) #else if(c->fd == -1) #endif return -1; return 1; } /** Called from OBEX-lib to tear down a connection. */ int cobex_disconnect(obex_t *self, void *data) { cobex_t *c; return_val_if_fail (self != NULL, -1); return_val_if_fail (data != NULL, -1); c = (cobex_t *) data; DEBUG(3, "%s() \n", __func__); cobex_cleanup(c, FALSE); return 1; } /** Called from OBEX-lib when data needs to be written. */ int cobex_write(obex_t *self, void *data, uint8_t *buffer, int length) { int written; cobex_t *c; return_val_if_fail (self != NULL, -1); return_val_if_fail (data != NULL, -1); c = (cobex_t *) data; DEBUG(3, "%s() \n", __func__); DEBUG(3, "%s() Data %d bytes\n", __func__, length); if (c->type != CT_BFB) { int retries=0, chunk, fails=0; written = 0; for (retries = 0; written < length; retries++) { chunk = write(c->fd, buffer+written, length-written); if (chunk <= 0) { if ( ++fails >= 10 ) { // to avoid infinite looping if something is really wrong DEBUG(1, "%s() Error writing to port (written %d bytes out of %d, in %d retries)\n", __func__, written, length, retries); return written; } usleep(1); // This mysteriously avoids a resource not available error on write() } else { written += chunk; fails = 0; // Reset error counter on successful write op } } if (retries > 0) DEBUG(2, "%s() Wrote %d bytes in %d retries\n", __func__, written, retries); return written; } if (c->seq == 0){ written = bfb_send_first(c->fd, buffer, length); DEBUG(2, "%s() Wrote %d first packets (%d bytes)\n", __func__, written, length); } else { written = bfb_send_next(c->fd, buffer, length, c->seq); DEBUG(2, "%s() Wrote %d packets (%d bytes)\n", __func__, written, length); } c->seq++; return written; } /** Called when input data is needed. */ int cobex_handleinput(obex_t *self, void *data, int timeout) { #ifdef _WIN32 DWORD actual; #else struct timeval time; fd_set fdset; int actual; #endif bfb_frame_t *frame; cobex_t *c; return_val_if_fail (self != NULL, -1); return_val_if_fail (data != NULL, -1); c = (cobex_t *) data; #ifdef _WIN32 if (!ReadFile(c->fd, &(c->recv[c->recv_len]), sizeof(c->recv) - c->recv_len, &actual, NULL)) DEBUG(2, "%s() Read error: %ld\n", __func__, actual); DEBUG(2, "%s() Read %ld bytes (%d bytes already buffered)\n", __func__, actual, c->recv_len); /* FIXME ... */ #else time.tv_sec = timeout; time.tv_usec = 0; /* Add the fd's to the set. */ FD_ZERO(&fdset); FD_SET(c->fd, &fdset); /* Wait for input */ actual = select(c->fd + 1, &fdset, NULL, NULL, &time); DEBUG(2, "%s() There is something (%d)\n", __func__, actual); /* Check if this is a timeout (0) or error (-1) */ if(actual <= 0) return actual; actual = read(c->fd, &(c->recv[c->recv_len]), sizeof(c->recv) - c->recv_len); DEBUG(2, "%s() Read %d bytes (%d bytes already buffered)\n", __func__, actual, c->recv_len); #endif if (c->type != CT_BFB) { if (actual > 0) { OBEX_CustomDataFeed(self, c->recv, actual); return 1; } return actual; } if ((c->data_buf == NULL) || (c->data_size == 0)) { c->data_size = 1024; c->data_buf = malloc(c->data_size); } if (actual > 0) { c->recv_len += actual; DEBUGBUFFER(c->recv, c->recv_len); while ((frame = bfb_read_packets(c->recv, &(c->recv_len)))) { DEBUG(2, "%s() Parsed %x (%d bytes remaining)\n", __func__, frame->type, c->recv_len); (void) bfb_assemble_data(&c->data_buf, &c->data_size, &c->data_len, frame); if (bfb_check_data(c->data_buf, c->data_len) == 1) { actual = bfb_send_ack(c->fd); #ifdef _WIN32 DEBUG(2, "%s() Wrote ack packet (%ld)\n", __func__, actual); #else DEBUG(2, "%s() Wrote ack packet (%d)\n", __func__, actual); #endif OBEX_CustomDataFeed(self, c->data_buf->data, c->data_len-7); /* free(c->data); c->data = NULL; */ c->data_len = 0; if (c->recv_len > 0) { DEBUG(2, "%s() Data remaining after feed, this can't be good.\n", __func__); DEBUGBUFFER(c->recv, c->recv_len); } return 1; } } } return actual; } /* Well, maybe this should be somewhere in the header */ /* static obex_ctrans_t _cobex_ctrans = { connect: cobex_connect, disconnect: cobex_disconnect, write: cobex_write, listen: NULL, handleinput: cobex_handleinput, }; */ /** Create a new multi cobex instance for a given TTY. \param tty the TTY to use. Defaults to the first serial TTY if NULL. */ obex_ctrans_t *cobex_ctrans (const char *tty) { obex_ctrans_t *ctrans; cobex_t *cobex; cobex = calloc (1, sizeof(cobex_t)); if(tty == NULL) tty = SERPORT; cobex->tty = strdup (tty); ctrans = calloc (1, sizeof(obex_ctrans_t)); ctrans->connect = cobex_connect; ctrans->disconnect = cobex_disconnect; ctrans->write = cobex_write; ctrans->listen = NULL; ctrans->handleinput = cobex_handleinput; ctrans->customdata = cobex; return ctrans; } /** Free all data related to a multi cobex instance. */ void cobex_free (obex_ctrans_t *ctrans) { cobex_t *cobex; return_if_fail (ctrans != NULL); cobex = (cobex_t *)ctrans->customdata; return_if_fail (cobex != NULL); free (cobex->tty); /* maybe there is a bfb_data_t left? */ /* free(cobex->data); */ free (cobex); free (ctrans); return; } obexftp-0.23/multicobex/multi_cobex.h0000644000076600000240000000263711146600644014675 00000000000000/** \file multicobex/multi_cobex.h Detect, initiate and run OBEX over custom serial port protocols (Siemens, Ericsson, New-Siemens, Motorola, Generic). ObexFTP library - language bindings for OBEX file transfer. Copyright (c) 2002-2007 Christian W. Zuckschwerdt ObexFTP is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with ObexFTP. If not, see . */ #ifndef MULTICOBEX_H #define MULTICOBEX_H #include #ifdef __cplusplus extern "C" { #endif /* session handling */ obex_ctrans_t * cobex_ctrans (const char *tty); void cobex_free (obex_ctrans_t * ctrans); /* callbacks */ int cobex_connect (obex_t *self, void *data); int cobex_disconnect (obex_t *self, void *data); int cobex_write (obex_t *self, void *data, uint8_t *buffer, int length); int cobex_handleinput (obex_t *self, void *data, int timeout); #ifdef __cplusplus } #endif #endif /* MULTICOBEX_H */ obexftp-0.23/swig/0000777000076600000240000000000011146603264011065 500000000000000obexftp-0.23/swig/tcl/0000777000076600000240000000000011146603264011647 500000000000000obexftp-0.23/swig/tcl/tcl_wrap.c0000644000076600000240000027547711146601120013555 00000000000000/* ---------------------------------------------------------------------------- * This file was automatically generated by SWIG (http://www.swig.org). * Version 1.3.33 * * This file is not intended to be easily readable and contains a number of * coding conventions designed to improve portability and efficiency. Do not make * changes to this file unless you know what you are doing--modify the SWIG * interface file instead. * ----------------------------------------------------------------------------- */ /* ----------------------------------------------------------------------------- * This section contains generic SWIG labels for method/variable * declarations/attributes, and other compiler dependent labels. * ----------------------------------------------------------------------------- */ /* template workaround for compilers that cannot correctly implement the C++ standard */ #ifndef SWIGTEMPLATEDISAMBIGUATOR # if defined(__SUNPRO_CC) && (__SUNPRO_CC <= 0x560) # define SWIGTEMPLATEDISAMBIGUATOR template # elif defined(__HP_aCC) /* Needed even with `aCC -AA' when `aCC -V' reports HP ANSI C++ B3910B A.03.55 */ /* If we find a maximum version that requires this, the test would be __HP_aCC <= 35500 for A.03.55 */ # define SWIGTEMPLATEDISAMBIGUATOR template # else # define SWIGTEMPLATEDISAMBIGUATOR # endif #endif /* inline attribute */ #ifndef SWIGINLINE # if defined(__cplusplus) || (defined(__GNUC__) && !defined(__STRICT_ANSI__)) # define SWIGINLINE inline # else # define SWIGINLINE # endif #endif /* attribute recognised by some compilers to avoid 'unused' warnings */ #ifndef SWIGUNUSED # if defined(__GNUC__) # if !(defined(__cplusplus)) || (__GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 4)) # define SWIGUNUSED __attribute__ ((__unused__)) # else # define SWIGUNUSED # endif # elif defined(__ICC) # define SWIGUNUSED __attribute__ ((__unused__)) # else # define SWIGUNUSED # endif #endif #ifndef SWIGUNUSEDPARM # ifdef __cplusplus # define SWIGUNUSEDPARM(p) # else # define SWIGUNUSEDPARM(p) p SWIGUNUSED # endif #endif /* internal SWIG method */ #ifndef SWIGINTERN # define SWIGINTERN static SWIGUNUSED #endif /* internal inline SWIG method */ #ifndef SWIGINTERNINLINE # define SWIGINTERNINLINE SWIGINTERN SWIGINLINE #endif /* exporting methods */ #if (__GNUC__ >= 4) || (__GNUC__ == 3 && __GNUC_MINOR__ >= 4) # ifndef GCC_HASCLASSVISIBILITY # define GCC_HASCLASSVISIBILITY # endif #endif #ifndef SWIGEXPORT # if defined(_WIN32) || defined(__WIN32__) || defined(__CYGWIN__) # if defined(STATIC_LINKED) # define SWIGEXPORT # else # define SWIGEXPORT __declspec(dllexport) # endif # else # if defined(__GNUC__) && defined(GCC_HASCLASSVISIBILITY) # define SWIGEXPORT __attribute__ ((visibility("default"))) # else # define SWIGEXPORT # endif # endif #endif /* calling conventions for Windows */ #ifndef SWIGSTDCALL # if defined(_WIN32) || defined(__WIN32__) || defined(__CYGWIN__) # define SWIGSTDCALL __stdcall # else # define SWIGSTDCALL # endif #endif /* Deal with Microsoft's attempt at deprecating C standard runtime functions */ #if !defined(SWIG_NO_CRT_SECURE_NO_DEPRECATE) && defined(_MSC_VER) && !defined(_CRT_SECURE_NO_DEPRECATE) # define _CRT_SECURE_NO_DEPRECATE #endif /* Deal with Microsoft's attempt at deprecating methods in the standard C++ library */ #if !defined(SWIG_NO_SCL_SECURE_NO_DEPRECATE) && defined(_MSC_VER) && !defined(_SCL_SECURE_NO_DEPRECATE) # define _SCL_SECURE_NO_DEPRECATE #endif #include #include #include #include #include #include /* ----------------------------------------------------------------------------- * swigrun.swg * * This file contains generic CAPI SWIG runtime support for pointer * type checking. * ----------------------------------------------------------------------------- */ /* This should only be incremented when either the layout of swig_type_info changes, or for whatever reason, the runtime changes incompatibly */ #define SWIG_RUNTIME_VERSION "3" /* define SWIG_TYPE_TABLE_NAME as "SWIG_TYPE_TABLE" */ #ifdef SWIG_TYPE_TABLE # define SWIG_QUOTE_STRING(x) #x # define SWIG_EXPAND_AND_QUOTE_STRING(x) SWIG_QUOTE_STRING(x) # define SWIG_TYPE_TABLE_NAME SWIG_EXPAND_AND_QUOTE_STRING(SWIG_TYPE_TABLE) #else # define SWIG_TYPE_TABLE_NAME #endif /* You can use the SWIGRUNTIME and SWIGRUNTIMEINLINE macros for creating a static or dynamic library from the swig runtime code. In 99.9% of the cases, swig just needs to declare them as 'static'. But only do this if is strictly necessary, ie, if you have problems with your compiler or so. */ #ifndef SWIGRUNTIME # define SWIGRUNTIME SWIGINTERN #endif #ifndef SWIGRUNTIMEINLINE # define SWIGRUNTIMEINLINE SWIGRUNTIME SWIGINLINE #endif /* Generic buffer size */ #ifndef SWIG_BUFFER_SIZE # define SWIG_BUFFER_SIZE 1024 #endif /* Flags for pointer conversions */ #define SWIG_POINTER_DISOWN 0x1 /* Flags for new pointer objects */ #define SWIG_POINTER_OWN 0x1 /* Flags/methods for returning states. The swig conversion methods, as ConvertPtr, return and integer that tells if the conversion was successful or not. And if not, an error code can be returned (see swigerrors.swg for the codes). Use the following macros/flags to set or process the returning states. In old swig versions, you usually write code as: if (SWIG_ConvertPtr(obj,vptr,ty.flags) != -1) { // success code } else { //fail code } Now you can be more explicit as: int res = SWIG_ConvertPtr(obj,vptr,ty.flags); if (SWIG_IsOK(res)) { // success code } else { // fail code } that seems to be the same, but now you can also do Type *ptr; int res = SWIG_ConvertPtr(obj,(void **)(&ptr),ty.flags); if (SWIG_IsOK(res)) { // success code if (SWIG_IsNewObj(res) { ... delete *ptr; } else { ... } } else { // fail code } I.e., now SWIG_ConvertPtr can return new objects and you can identify the case and take care of the deallocation. Of course that requires also to SWIG_ConvertPtr to return new result values, as int SWIG_ConvertPtr(obj, ptr,...) { if () { if () { *ptr = ; return SWIG_NEWOBJ; } else { *ptr = ; return SWIG_OLDOBJ; } } else { return SWIG_BADOBJ; } } Of course, returning the plain '0(success)/-1(fail)' still works, but you can be more explicit by returning SWIG_BADOBJ, SWIG_ERROR or any of the swig errors code. Finally, if the SWIG_CASTRANK_MODE is enabled, the result code allows to return the 'cast rank', for example, if you have this int food(double) int fooi(int); and you call food(1) // cast rank '1' (1 -> 1.0) fooi(1) // cast rank '0' just use the SWIG_AddCast()/SWIG_CheckState() */ #define SWIG_OK (0) #define SWIG_ERROR (-1) #define SWIG_IsOK(r) (r >= 0) #define SWIG_ArgError(r) ((r != SWIG_ERROR) ? r : SWIG_TypeError) /* The CastRankLimit says how many bits are used for the cast rank */ #define SWIG_CASTRANKLIMIT (1 << 8) /* The NewMask denotes the object was created (using new/malloc) */ #define SWIG_NEWOBJMASK (SWIG_CASTRANKLIMIT << 1) /* The TmpMask is for in/out typemaps that use temporal objects */ #define SWIG_TMPOBJMASK (SWIG_NEWOBJMASK << 1) /* Simple returning values */ #define SWIG_BADOBJ (SWIG_ERROR) #define SWIG_OLDOBJ (SWIG_OK) #define SWIG_NEWOBJ (SWIG_OK | SWIG_NEWOBJMASK) #define SWIG_TMPOBJ (SWIG_OK | SWIG_TMPOBJMASK) /* Check, add and del mask methods */ #define SWIG_AddNewMask(r) (SWIG_IsOK(r) ? (r | SWIG_NEWOBJMASK) : r) #define SWIG_DelNewMask(r) (SWIG_IsOK(r) ? (r & ~SWIG_NEWOBJMASK) : r) #define SWIG_IsNewObj(r) (SWIG_IsOK(r) && (r & SWIG_NEWOBJMASK)) #define SWIG_AddTmpMask(r) (SWIG_IsOK(r) ? (r | SWIG_TMPOBJMASK) : r) #define SWIG_DelTmpMask(r) (SWIG_IsOK(r) ? (r & ~SWIG_TMPOBJMASK) : r) #define SWIG_IsTmpObj(r) (SWIG_IsOK(r) && (r & SWIG_TMPOBJMASK)) /* Cast-Rank Mode */ #if defined(SWIG_CASTRANK_MODE) # ifndef SWIG_TypeRank # define SWIG_TypeRank unsigned long # endif # ifndef SWIG_MAXCASTRANK /* Default cast allowed */ # define SWIG_MAXCASTRANK (2) # endif # define SWIG_CASTRANKMASK ((SWIG_CASTRANKLIMIT) -1) # define SWIG_CastRank(r) (r & SWIG_CASTRANKMASK) SWIGINTERNINLINE int SWIG_AddCast(int r) { return SWIG_IsOK(r) ? ((SWIG_CastRank(r) < SWIG_MAXCASTRANK) ? (r + 1) : SWIG_ERROR) : r; } SWIGINTERNINLINE int SWIG_CheckState(int r) { return SWIG_IsOK(r) ? SWIG_CastRank(r) + 1 : 0; } #else /* no cast-rank mode */ # define SWIG_AddCast # define SWIG_CheckState(r) (SWIG_IsOK(r) ? 1 : 0) #endif #include #ifdef __cplusplus extern "C" { #endif typedef void *(*swig_converter_func)(void *); typedef struct swig_type_info *(*swig_dycast_func)(void **); /* Structure to store inforomation on one type */ typedef struct swig_type_info { const char *name; /* mangled name of this type */ const char *str; /* human readable name of this type */ swig_dycast_func dcast; /* dynamic cast function down a hierarchy */ struct swig_cast_info *cast; /* linked list of types that can cast into this type */ void *clientdata; /* language specific type data */ int owndata; /* flag if the structure owns the clientdata */ } swig_type_info; /* Structure to store a type and conversion function used for casting */ typedef struct swig_cast_info { swig_type_info *type; /* pointer to type that is equivalent to this type */ swig_converter_func converter; /* function to cast the void pointers */ struct swig_cast_info *next; /* pointer to next cast in linked list */ struct swig_cast_info *prev; /* pointer to the previous cast */ } swig_cast_info; /* Structure used to store module information * Each module generates one structure like this, and the runtime collects * all of these structures and stores them in a circularly linked list.*/ typedef struct swig_module_info { swig_type_info **types; /* Array of pointers to swig_type_info structures that are in this module */ size_t size; /* Number of types in this module */ struct swig_module_info *next; /* Pointer to next element in circularly linked list */ swig_type_info **type_initial; /* Array of initially generated type structures */ swig_cast_info **cast_initial; /* Array of initially generated casting structures */ void *clientdata; /* Language specific module data */ } swig_module_info; /* Compare two type names skipping the space characters, therefore "char*" == "char *" and "Class" == "Class", etc. Return 0 when the two name types are equivalent, as in strncmp, but skipping ' '. */ SWIGRUNTIME int SWIG_TypeNameComp(const char *f1, const char *l1, const char *f2, const char *l2) { for (;(f1 != l1) && (f2 != l2); ++f1, ++f2) { while ((*f1 == ' ') && (f1 != l1)) ++f1; while ((*f2 == ' ') && (f2 != l2)) ++f2; if (*f1 != *f2) return (*f1 > *f2) ? 1 : -1; } return (int)((l1 - f1) - (l2 - f2)); } /* Check type equivalence in a name list like ||... Return 0 if not equal, 1 if equal */ SWIGRUNTIME int SWIG_TypeEquiv(const char *nb, const char *tb) { int equiv = 0; const char* te = tb + strlen(tb); const char* ne = nb; while (!equiv && *ne) { for (nb = ne; *ne; ++ne) { if (*ne == '|') break; } equiv = (SWIG_TypeNameComp(nb, ne, tb, te) == 0) ? 1 : 0; if (*ne) ++ne; } return equiv; } /* Check type equivalence in a name list like ||... Return 0 if equal, -1 if nb < tb, 1 if nb > tb */ SWIGRUNTIME int SWIG_TypeCompare(const char *nb, const char *tb) { int equiv = 0; const char* te = tb + strlen(tb); const char* ne = nb; while (!equiv && *ne) { for (nb = ne; *ne; ++ne) { if (*ne == '|') break; } equiv = (SWIG_TypeNameComp(nb, ne, tb, te) == 0) ? 1 : 0; if (*ne) ++ne; } return equiv; } /* think of this as a c++ template<> or a scheme macro */ #define SWIG_TypeCheck_Template(comparison, ty) \ if (ty) { \ swig_cast_info *iter = ty->cast; \ while (iter) { \ if (comparison) { \ if (iter == ty->cast) return iter; \ /* Move iter to the top of the linked list */ \ iter->prev->next = iter->next; \ if (iter->next) \ iter->next->prev = iter->prev; \ iter->next = ty->cast; \ iter->prev = 0; \ if (ty->cast) ty->cast->prev = iter; \ ty->cast = iter; \ return iter; \ } \ iter = iter->next; \ } \ } \ return 0 /* Check the typename */ SWIGRUNTIME swig_cast_info * SWIG_TypeCheck(const char *c, swig_type_info *ty) { SWIG_TypeCheck_Template(strcmp(iter->type->name, c) == 0, ty); } /* Same as previous function, except strcmp is replaced with a pointer comparison */ SWIGRUNTIME swig_cast_info * SWIG_TypeCheckStruct(swig_type_info *from, swig_type_info *into) { SWIG_TypeCheck_Template(iter->type == from, into); } /* Cast a pointer up an inheritance hierarchy */ SWIGRUNTIMEINLINE void * SWIG_TypeCast(swig_cast_info *ty, void *ptr) { return ((!ty) || (!ty->converter)) ? ptr : (*ty->converter)(ptr); } /* Dynamic pointer casting. Down an inheritance hierarchy */ SWIGRUNTIME swig_type_info * SWIG_TypeDynamicCast(swig_type_info *ty, void **ptr) { swig_type_info *lastty = ty; if (!ty || !ty->dcast) return ty; while (ty && (ty->dcast)) { ty = (*ty->dcast)(ptr); if (ty) lastty = ty; } return lastty; } /* Return the name associated with this type */ SWIGRUNTIMEINLINE const char * SWIG_TypeName(const swig_type_info *ty) { return ty->name; } /* Return the pretty name associated with this type, that is an unmangled type name in a form presentable to the user. */ SWIGRUNTIME const char * SWIG_TypePrettyName(const swig_type_info *type) { /* The "str" field contains the equivalent pretty names of the type, separated by vertical-bar characters. We choose to print the last name, as it is often (?) the most specific. */ if (!type) return NULL; if (type->str != NULL) { const char *last_name = type->str; const char *s; for (s = type->str; *s; s++) if (*s == '|') last_name = s+1; return last_name; } else return type->name; } /* Set the clientdata field for a type */ SWIGRUNTIME void SWIG_TypeClientData(swig_type_info *ti, void *clientdata) { swig_cast_info *cast = ti->cast; /* if (ti->clientdata == clientdata) return; */ ti->clientdata = clientdata; while (cast) { if (!cast->converter) { swig_type_info *tc = cast->type; if (!tc->clientdata) { SWIG_TypeClientData(tc, clientdata); } } cast = cast->next; } } SWIGRUNTIME void SWIG_TypeNewClientData(swig_type_info *ti, void *clientdata) { SWIG_TypeClientData(ti, clientdata); ti->owndata = 1; } /* Search for a swig_type_info structure only by mangled name Search is a O(log #types) We start searching at module start, and finish searching when start == end. Note: if start == end at the beginning of the function, we go all the way around the circular list. */ SWIGRUNTIME swig_type_info * SWIG_MangledTypeQueryModule(swig_module_info *start, swig_module_info *end, const char *name) { swig_module_info *iter = start; do { if (iter->size) { register size_t l = 0; register size_t r = iter->size - 1; do { /* since l+r >= 0, we can (>> 1) instead (/ 2) */ register size_t i = (l + r) >> 1; const char *iname = iter->types[i]->name; if (iname) { register int compare = strcmp(name, iname); if (compare == 0) { return iter->types[i]; } else if (compare < 0) { if (i) { r = i - 1; } else { break; } } else if (compare > 0) { l = i + 1; } } else { break; /* should never happen */ } } while (l <= r); } iter = iter->next; } while (iter != end); return 0; } /* Search for a swig_type_info structure for either a mangled name or a human readable name. It first searches the mangled names of the types, which is a O(log #types) If a type is not found it then searches the human readable names, which is O(#types). We start searching at module start, and finish searching when start == end. Note: if start == end at the beginning of the function, we go all the way around the circular list. */ SWIGRUNTIME swig_type_info * SWIG_TypeQueryModule(swig_module_info *start, swig_module_info *end, const char *name) { /* STEP 1: Search the name field using binary search */ swig_type_info *ret = SWIG_MangledTypeQueryModule(start, end, name); if (ret) { return ret; } else { /* STEP 2: If the type hasn't been found, do a complete search of the str field (the human readable name) */ swig_module_info *iter = start; do { register size_t i = 0; for (; i < iter->size; ++i) { if (iter->types[i]->str && (SWIG_TypeEquiv(iter->types[i]->str, name))) return iter->types[i]; } iter = iter->next; } while (iter != end); } /* neither found a match */ return 0; } /* Pack binary data into a string */ SWIGRUNTIME char * SWIG_PackData(char *c, void *ptr, size_t sz) { static const char hex[17] = "0123456789abcdef"; register const unsigned char *u = (unsigned char *) ptr; register const unsigned char *eu = u + sz; for (; u != eu; ++u) { register unsigned char uu = *u; *(c++) = hex[(uu & 0xf0) >> 4]; *(c++) = hex[uu & 0xf]; } return c; } /* Unpack binary data from a string */ SWIGRUNTIME const char * SWIG_UnpackData(const char *c, void *ptr, size_t sz) { register unsigned char *u = (unsigned char *) ptr; register const unsigned char *eu = u + sz; for (; u != eu; ++u) { register char d = *(c++); register unsigned char uu; if ((d >= '0') && (d <= '9')) uu = ((d - '0') << 4); else if ((d >= 'a') && (d <= 'f')) uu = ((d - ('a'-10)) << 4); else return (char *) 0; d = *(c++); if ((d >= '0') && (d <= '9')) uu |= (d - '0'); else if ((d >= 'a') && (d <= 'f')) uu |= (d - ('a'-10)); else return (char *) 0; *u = uu; } return c; } /* Pack 'void *' into a string buffer. */ SWIGRUNTIME char * SWIG_PackVoidPtr(char *buff, void *ptr, const char *name, size_t bsz) { char *r = buff; if ((2*sizeof(void *) + 2) > bsz) return 0; *(r++) = '_'; r = SWIG_PackData(r,&ptr,sizeof(void *)); if (strlen(name) + 1 > (bsz - (r - buff))) return 0; strcpy(r,name); return buff; } SWIGRUNTIME const char * SWIG_UnpackVoidPtr(const char *c, void **ptr, const char *name) { if (*c != '_') { if (strcmp(c,"NULL") == 0) { *ptr = (void *) 0; return name; } else { return 0; } } return SWIG_UnpackData(++c,ptr,sizeof(void *)); } SWIGRUNTIME char * SWIG_PackDataName(char *buff, void *ptr, size_t sz, const char *name, size_t bsz) { char *r = buff; size_t lname = (name ? strlen(name) : 0); if ((2*sz + 2 + lname) > bsz) return 0; *(r++) = '_'; r = SWIG_PackData(r,ptr,sz); if (lname) { strncpy(r,name,lname+1); } else { *r = 0; } return buff; } SWIGRUNTIME const char * SWIG_UnpackDataName(const char *c, void *ptr, size_t sz, const char *name) { if (*c != '_') { if (strcmp(c,"NULL") == 0) { memset(ptr,0,sz); return name; } else { return 0; } } return SWIG_UnpackData(++c,ptr,sz); } #ifdef __cplusplus } #endif /* Errors in SWIG */ #define SWIG_UnknownError -1 #define SWIG_IOError -2 #define SWIG_RuntimeError -3 #define SWIG_IndexError -4 #define SWIG_TypeError -5 #define SWIG_DivisionByZero -6 #define SWIG_OverflowError -7 #define SWIG_SyntaxError -8 #define SWIG_ValueError -9 #define SWIG_SystemError -10 #define SWIG_AttributeError -11 #define SWIG_MemoryError -12 #define SWIG_NullReferenceError -13 /* ----------------------------------------------------------------------------- * error manipulation * ----------------------------------------------------------------------------- */ SWIGINTERN const char* SWIG_Tcl_ErrorType(int code) { const char* type = 0; switch(code) { case SWIG_MemoryError: type = "MemoryError"; break; case SWIG_IOError: type = "IOError"; break; case SWIG_RuntimeError: type = "RuntimeError"; break; case SWIG_IndexError: type = "IndexError"; break; case SWIG_TypeError: type = "TypeError"; break; case SWIG_DivisionByZero: type = "ZeroDivisionError"; break; case SWIG_OverflowError: type = "OverflowError"; break; case SWIG_SyntaxError: type = "SyntaxError"; break; case SWIG_ValueError: type = "ValueError"; break; case SWIG_SystemError: type = "SystemError"; break; case SWIG_AttributeError: type = "AttributeError"; break; default: type = "RuntimeError"; } return type; } SWIGINTERN void SWIG_Tcl_SetErrorObj(Tcl_Interp *interp, const char *ctype, Tcl_Obj *obj) { Tcl_ResetResult(interp); Tcl_SetObjResult(interp, obj); Tcl_SetErrorCode(interp, "SWIG", ctype, NULL); } SWIGINTERN void SWIG_Tcl_SetErrorMsg(Tcl_Interp *interp, const char *ctype, const char *mesg) { Tcl_ResetResult(interp); Tcl_SetErrorCode(interp, "SWIG", ctype, NULL); Tcl_AppendResult(interp, ctype, " ", mesg, NULL); /* Tcl_AddErrorInfo(interp, ctype); Tcl_AddErrorInfo(interp, " "); Tcl_AddErrorInfo(interp, mesg); */ } SWIGINTERNINLINE void SWIG_Tcl_AddErrorMsg(Tcl_Interp *interp, const char* mesg) { Tcl_AddErrorInfo(interp, mesg); } /* ----------------------------------------------------------------------------- * SWIG API. Portion that goes into the runtime * ----------------------------------------------------------------------------- */ #ifdef __cplusplus extern "C" { #endif /* ----------------------------------------------------------------------------- * Constant declarations * ----------------------------------------------------------------------------- */ /* Constant Types */ #define SWIG_TCL_POINTER 4 #define SWIG_TCL_BINARY 5 /* Constant information structure */ typedef struct swig_const_info { int type; char *name; long lvalue; double dvalue; void *pvalue; swig_type_info **ptype; } swig_const_info; typedef int (*swig_wrapper)(ClientData, Tcl_Interp *, int, Tcl_Obj *CONST []); typedef int (*swig_wrapper_func)(ClientData, Tcl_Interp *, int, Tcl_Obj *CONST []); typedef char *(*swig_variable_func)(ClientData, Tcl_Interp *, char *, char *, int); typedef void (*swig_delete_func)(ClientData); typedef struct swig_method { const char *name; swig_wrapper method; } swig_method; typedef struct swig_attribute { const char *name; swig_wrapper getmethod; swig_wrapper setmethod; } swig_attribute; typedef struct swig_class { const char *name; swig_type_info **type; swig_wrapper constructor; void (*destructor)(void *); swig_method *methods; swig_attribute *attributes; struct swig_class **bases; const char **base_names; swig_module_info *module; } swig_class; typedef struct swig_instance { Tcl_Obj *thisptr; void *thisvalue; swig_class *classptr; int destroy; Tcl_Command cmdtok; } swig_instance; /* Structure for command table */ typedef struct { const char *name; int (*wrapper)(ClientData, Tcl_Interp *, int, Tcl_Obj *CONST []); ClientData clientdata; } swig_command_info; /* Structure for variable linking table */ typedef struct { const char *name; void *addr; char * (*get)(ClientData, Tcl_Interp *, char *, char *, int); char * (*set)(ClientData, Tcl_Interp *, char *, char *, int); } swig_var_info; /* -----------------------------------------------------------------------------* * Install a constant object * -----------------------------------------------------------------------------*/ static Tcl_HashTable swigconstTable; static int swigconstTableinit = 0; SWIGINTERN void SWIG_Tcl_SetConstantObj(Tcl_Interp *interp, const char* name, Tcl_Obj *obj) { int newobj; Tcl_ObjSetVar2(interp,Tcl_NewStringObj(name,-1), NULL, obj, TCL_GLOBAL_ONLY); Tcl_SetHashValue(Tcl_CreateHashEntry(&swigconstTable, name, &newobj), (ClientData) obj); } SWIGINTERN Tcl_Obj * SWIG_Tcl_GetConstantObj(const char *key) { Tcl_HashEntry *entryPtr; if (!swigconstTableinit) return 0; entryPtr = Tcl_FindHashEntry(&swigconstTable, key); if (entryPtr) { return (Tcl_Obj *) Tcl_GetHashValue(entryPtr); } return 0; } #ifdef __cplusplus } #endif /* ----------------------------------------------------------------------------- * See the LICENSE file for information on copyright, usage and redistribution * of SWIG, and the README file for authors - http://www.swig.org/release.html. * * tclrun.swg * * This file contains the runtime support for Tcl modules and includes * code for managing global variables and pointer type checking. * ----------------------------------------------------------------------------- */ /* Common SWIG API */ /* for raw pointers */ #define SWIG_ConvertPtr(oc, ptr, ty, flags) SWIG_Tcl_ConvertPtr(interp, oc, ptr, ty, flags) #define SWIG_NewPointerObj(ptr, type, flags) SWIG_Tcl_NewPointerObj(ptr, type, flags) /* for raw packed data */ #define SWIG_ConvertPacked(obj, ptr, sz, ty) SWIG_Tcl_ConvertPacked(interp, obj, ptr, sz, ty) #define SWIG_NewPackedObj(ptr, sz, type) SWIG_Tcl_NewPackedObj(ptr, sz, type) /* for class or struct pointers */ #define SWIG_ConvertInstance(obj, pptr, type, flags) SWIG_Tcl_ConvertPtr(interp, obj, pptr, type, flags) #define SWIG_NewInstanceObj(thisvalue, type, flags) SWIG_Tcl_NewInstanceObj(interp, thisvalue, type, flags) /* for C or C++ function pointers */ #define SWIG_ConvertFunctionPtr(obj, pptr, type) SWIG_Tcl_ConvertPtr(interp, obj, pptr, type, 0) #define SWIG_NewFunctionPtrObj(ptr, type) SWIG_Tcl_NewPointerObj(ptr, type, 0) /* for C++ member pointers, ie, member methods */ #define SWIG_ConvertMember(obj, ptr, sz, ty) SWIG_Tcl_ConvertPacked(interp,obj, ptr, sz, ty) #define SWIG_NewMemberObj(ptr, sz, type) SWIG_Tcl_NewPackedObj(ptr, sz, type) /* Runtime API */ #define SWIG_GetModule(clientdata) SWIG_Tcl_GetModule((Tcl_Interp *) (clientdata)) #define SWIG_SetModule(clientdata, pointer) SWIG_Tcl_SetModule((Tcl_Interp *) (clientdata), pointer) /* Error manipulation */ #define SWIG_ErrorType(code) SWIG_Tcl_ErrorType(code) #define SWIG_Error(code, msg) SWIG_Tcl_SetErrorMsg(interp, SWIG_Tcl_ErrorType(code), msg) #define SWIG_fail goto fail /* Tcl-specific SWIG API */ #define SWIG_Acquire(ptr) SWIG_Tcl_Acquire(ptr) #define SWIG_MethodCommand SWIG_Tcl_MethodCommand #define SWIG_Disown(ptr) SWIG_Tcl_Disown(ptr) #define SWIG_ConvertPtrFromString(c, ptr, ty, flags) SWIG_Tcl_ConvertPtrFromString(interp, c, ptr, ty, flags) #define SWIG_MakePtr(c, ptr, ty, flags) SWIG_Tcl_MakePtr(c, ptr, ty, flags) #define SWIG_PointerTypeFromString(c) SWIG_Tcl_PointerTypeFromString(c) #define SWIG_GetArgs SWIG_Tcl_GetArgs #define SWIG_GetConstantObj(key) SWIG_Tcl_GetConstantObj(key) #define SWIG_ObjectConstructor SWIG_Tcl_ObjectConstructor #define SWIG_Thisown(ptr) SWIG_Tcl_Thisown(ptr) #define SWIG_ObjectDelete SWIG_Tcl_ObjectDelete #define SWIG_TCL_DECL_ARGS_2(arg1, arg2) (Tcl_Interp *interp SWIGUNUSED, arg1, arg2) #define SWIG_TCL_CALL_ARGS_2(arg1, arg2) (interp, arg1, arg2) /* ----------------------------------------------------------------------------- * pointers/data manipulation * ----------------------------------------------------------------------------- */ /* For backward compatibility only */ #define SWIG_POINTER_EXCEPTION 0 #define SWIG_GetConstant SWIG_GetConstantObj #define SWIG_Tcl_GetConstant SWIG_Tcl_GetConstantObj #ifdef __cplusplus extern "C" { #if 0 } /* cc-mode */ #endif #endif /* Object support */ SWIGRUNTIME Tcl_HashTable* SWIG_Tcl_ObjectTable(void) { static Tcl_HashTable swigobjectTable; static int swigobjectTableinit = 0; if (!swigobjectTableinit) { Tcl_InitHashTable(&swigobjectTable, TCL_ONE_WORD_KEYS); swigobjectTableinit = 1; } return &swigobjectTable; } /* Acquire ownership of a pointer */ SWIGRUNTIME void SWIG_Tcl_Acquire(void *ptr) { int newobj; Tcl_CreateHashEntry(SWIG_Tcl_ObjectTable(), (char *) ptr, &newobj); } SWIGRUNTIME int SWIG_Tcl_Thisown(void *ptr) { if (Tcl_FindHashEntry(SWIG_Tcl_ObjectTable(), (char *) ptr)) { return 1; } return 0; } /* Disown a pointer. Returns 1 if we owned it to begin with */ SWIGRUNTIME int SWIG_Tcl_Disown(void *ptr) { Tcl_HashEntry *entryPtr = Tcl_FindHashEntry(SWIG_Tcl_ObjectTable(), (char *) ptr); if (entryPtr) { Tcl_DeleteHashEntry(entryPtr); return 1; } return 0; } /* Convert a pointer value */ SWIGRUNTIME int SWIG_Tcl_ConvertPtrFromString(Tcl_Interp *interp, const char *c, void **ptr, swig_type_info *ty, int flags) { swig_cast_info *tc; /* Pointer values must start with leading underscore */ while (*c != '_') { *ptr = (void *) 0; if (strcmp(c,"NULL") == 0) return SWIG_OK; /* Empty string: not a pointer */ if (*c == 0) return SWIG_ERROR; /* Hmmm. It could be an object name. */ /* Check if this is a command at all. Prevents cget -this */ /* from being called when c is not a command, firing the unknown proc */ if (Tcl_VarEval(interp,"info commands ", c, (char *) NULL) == TCL_OK) { Tcl_Obj *result = Tcl_GetObjResult(interp); if (*(Tcl_GetStringFromObj(result, NULL)) == 0) { /* It's not a command, so it can't be a pointer */ Tcl_ResetResult(interp); return SWIG_ERROR; } } else { /* This will only fail if the argument is multiple words. */ /* Multiple words are also not commands. */ Tcl_ResetResult(interp); return SWIG_ERROR; } /* Check if this is really a SWIG pointer */ if (Tcl_VarEval(interp,c," cget -this", (char *) NULL) != TCL_OK) { Tcl_ResetResult(interp); return SWIG_ERROR; } c = Tcl_GetStringFromObj(Tcl_GetObjResult(interp), NULL); } c++; c = SWIG_UnpackData(c,ptr,sizeof(void *)); if (ty) { tc = c ? SWIG_TypeCheck(c,ty) : 0; if (!tc) { return SWIG_ERROR; } if (flags & SWIG_POINTER_DISOWN) { SWIG_Disown((void *) *ptr); } *ptr = SWIG_TypeCast(tc,(void *) *ptr); } return SWIG_OK; } /* Convert a pointer value */ SWIGRUNTIMEINLINE int SWIG_Tcl_ConvertPtr(Tcl_Interp *interp, Tcl_Obj *oc, void **ptr, swig_type_info *ty, int flags) { return SWIG_Tcl_ConvertPtrFromString(interp, Tcl_GetStringFromObj(oc,NULL), ptr, ty, flags); } /* Convert a pointer value */ SWIGRUNTIME char * SWIG_Tcl_PointerTypeFromString(char *c) { char d; /* Pointer values must start with leading underscore. NULL has no type */ if (*c != '_') { return 0; } c++; /* Extract hex value from pointer */ while ((d = *c)) { if (!(((d >= '0') && (d <= '9')) || ((d >= 'a') && (d <= 'f')))) break; c++; } return c; } /* Convert a packed value value */ SWIGRUNTIME int SWIG_Tcl_ConvertPacked(Tcl_Interp *SWIGUNUSEDPARM(interp) , Tcl_Obj *obj, void *ptr, int sz, swig_type_info *ty) { swig_cast_info *tc; const char *c; if (!obj) goto type_error; c = Tcl_GetStringFromObj(obj,NULL); /* Pointer values must start with leading underscore */ if (*c != '_') goto type_error; c++; c = SWIG_UnpackData(c,ptr,sz); if (ty) { tc = SWIG_TypeCheck(c,ty); if (!tc) goto type_error; } return SWIG_OK; type_error: return SWIG_ERROR; } /* Take a pointer and convert it to a string */ SWIGRUNTIME void SWIG_Tcl_MakePtr(char *c, void *ptr, swig_type_info *ty, int flags) { if (ptr) { *(c++) = '_'; c = SWIG_PackData(c,&ptr,sizeof(void *)); strcpy(c,ty->name); } else { strcpy(c,(char *)"NULL"); } flags = 0; } /* Create a new pointer object */ SWIGRUNTIMEINLINE Tcl_Obj * SWIG_Tcl_NewPointerObj(void *ptr, swig_type_info *type, int flags) { Tcl_Obj *robj; char result[SWIG_BUFFER_SIZE]; SWIG_MakePtr(result,ptr,type,flags); robj = Tcl_NewStringObj(result,-1); return robj; } SWIGRUNTIME Tcl_Obj * SWIG_Tcl_NewPackedObj(void *ptr, int sz, swig_type_info *type) { char result[1024]; char *r = result; if ((2*sz + 1 + strlen(type->name)) > 1000) return 0; *(r++) = '_'; r = SWIG_PackData(r,ptr,sz); strcpy(r,type->name); return Tcl_NewStringObj(result,-1); } /* -----------------------------------------------------------------------------* * Get type list * -----------------------------------------------------------------------------*/ SWIGRUNTIME swig_module_info * SWIG_Tcl_GetModule(Tcl_Interp *interp) { const char *data; swig_module_info *ret = 0; /* first check if pointer already created */ data = Tcl_GetVar(interp, (char *)"swig_runtime_data_type_pointer" SWIG_RUNTIME_VERSION SWIG_TYPE_TABLE_NAME, TCL_GLOBAL_ONLY); if (data) { SWIG_UnpackData(data, &ret, sizeof(swig_type_info **)); } return ret; } SWIGRUNTIME void SWIG_Tcl_SetModule(Tcl_Interp *interp, swig_module_info *module) { char buf[SWIG_BUFFER_SIZE]; char *data; /* create a new pointer */ data = SWIG_PackData(buf, &module, sizeof(swig_type_info **)); *data = 0; Tcl_SetVar(interp, (char *)"swig_runtime_data_type_pointer" SWIG_RUNTIME_VERSION SWIG_TYPE_TABLE_NAME, buf, 0); } /* -----------------------------------------------------------------------------* * Object auxiliars * -----------------------------------------------------------------------------*/ SWIGRUNTIME void SWIG_Tcl_ObjectDelete(ClientData clientData) { swig_instance *si = (swig_instance *) clientData; if ((si) && (si->destroy) && (SWIG_Disown(si->thisvalue))) { if (si->classptr->destructor) { (si->classptr->destructor)(si->thisvalue); } } Tcl_DecrRefCount(si->thisptr); free(si); } /* Function to invoke object methods given an instance */ SWIGRUNTIME int SWIG_Tcl_MethodCommand(ClientData clientData, Tcl_Interp *interp, int objc, Tcl_Obj *CONST _objv[]) { char *method, *attrname; swig_instance *inst = (swig_instance *) clientData; swig_method *meth; swig_attribute *attr; Tcl_Obj *oldarg; Tcl_Obj **objv; int rcode; swig_class *cls; swig_class *cls_stack[64]; int cls_stack_bi[64]; int cls_stack_top = 0; int numconf = 2; int bi; objv = (Tcl_Obj **) _objv; if (objc < 2) { Tcl_SetResult(interp, (char *) "wrong # args.", TCL_STATIC); return TCL_ERROR; } method = Tcl_GetStringFromObj(objv[1],NULL); if (strcmp(method,"-acquire") == 0) { inst->destroy = 1; SWIG_Acquire(inst->thisvalue); return TCL_OK; } if (strcmp(method,"-disown") == 0) { if (inst->destroy) { SWIG_Disown(inst->thisvalue); } inst->destroy = 0; return TCL_OK; } if (strcmp(method,"-delete") == 0) { Tcl_DeleteCommandFromToken(interp,inst->cmdtok); return TCL_OK; } cls_stack[cls_stack_top] = inst->classptr; cls_stack_bi[cls_stack_top] = -1; cls = inst->classptr; while (1) { bi = cls_stack_bi[cls_stack_top]; cls = cls_stack[cls_stack_top]; if (bi != -1) { if (!cls->bases[bi] && cls->base_names[bi]) { /* lookup and cache the base class */ swig_type_info *info = SWIG_TypeQueryModule(cls->module, cls->module, cls->base_names[bi]); if (info) cls->bases[bi] = (swig_class *) info->clientdata; } cls = cls->bases[bi]; if (cls) { cls_stack_bi[cls_stack_top]++; cls_stack_top++; cls_stack[cls_stack_top] = cls; cls_stack_bi[cls_stack_top] = -1; continue; } } if (!cls) { cls_stack_top--; if (cls_stack_top < 0) break; else continue; } cls_stack_bi[cls_stack_top]++; meth = cls->methods; /* Check for methods */ while (meth && meth->name) { if (strcmp(meth->name,method) == 0) { oldarg = objv[1]; objv[1] = inst->thisptr; Tcl_IncrRefCount(inst->thisptr); rcode = (*meth->method)(clientData,interp,objc,objv); objv[1] = oldarg; Tcl_DecrRefCount(inst->thisptr); return rcode; } meth++; } /* Check class methods for a match */ if (strcmp(method,"cget") == 0) { if (objc < 3) { Tcl_SetResult(interp, (char *) "wrong # args.", TCL_STATIC); return TCL_ERROR; } attrname = Tcl_GetStringFromObj(objv[2],NULL); attr = cls->attributes; while (attr && attr->name) { if ((strcmp(attr->name, attrname) == 0) && (attr->getmethod)) { oldarg = objv[1]; objv[1] = inst->thisptr; Tcl_IncrRefCount(inst->thisptr); rcode = (*attr->getmethod)(clientData,interp,2, objv); objv[1] = oldarg; Tcl_DecrRefCount(inst->thisptr); return rcode; } attr++; } if (strcmp(attrname, "-this") == 0) { Tcl_SetObjResult(interp, Tcl_DuplicateObj(inst->thisptr)); return TCL_OK; } if (strcmp(attrname, "-thisown") == 0) { if (SWIG_Thisown(inst->thisvalue)) { Tcl_SetResult(interp,(char*)"1",TCL_STATIC); } else { Tcl_SetResult(interp,(char*)"0",TCL_STATIC); } return TCL_OK; } } else if (strcmp(method, "configure") == 0) { int i; if (objc < 4) { Tcl_SetResult(interp, (char *) "wrong # args.", TCL_STATIC); return TCL_ERROR; } i = 2; while (i < objc) { attrname = Tcl_GetStringFromObj(objv[i],NULL); attr = cls->attributes; while (attr && attr->name) { if ((strcmp(attr->name, attrname) == 0) && (attr->setmethod)) { oldarg = objv[i]; objv[i] = inst->thisptr; Tcl_IncrRefCount(inst->thisptr); rcode = (*attr->setmethod)(clientData,interp,3, &objv[i-1]); objv[i] = oldarg; Tcl_DecrRefCount(inst->thisptr); if (rcode != TCL_OK) return rcode; numconf += 2; } attr++; } i+=2; } } } if (strcmp(method,"configure") == 0) { if (numconf >= objc) { return TCL_OK; } else { Tcl_SetResult(interp,(char *) "Invalid attribute name.", TCL_STATIC); return TCL_ERROR; } } if (strcmp(method,"cget") == 0) { Tcl_SetResult(interp,(char *) "Invalid attribute name.", TCL_STATIC); return TCL_ERROR; } Tcl_SetResult(interp, (char *) "Invalid method. Must be one of: configure cget -acquire -disown -delete", TCL_STATIC); cls = inst->classptr; bi = 0; while (cls) { meth = cls->methods; while (meth && meth->name) { char *cr = (char *) Tcl_GetStringResult(interp); size_t meth_len = strlen(meth->name); char* where = strchr(cr,':'); while(where) { where = strstr(where, meth->name); if(where) { if(where[-1] == ' ' && (where[meth_len] == ' ' || where[meth_len]==0)) { break; } else { where++; } } } if (!where) Tcl_AppendElement(interp, (char *) meth->name); meth++; } cls = inst->classptr->bases[bi++]; } return TCL_ERROR; } /* This function takes the current result and turns it into an object command */ SWIGRUNTIME Tcl_Obj * SWIG_Tcl_NewInstanceObj(Tcl_Interp *interp, void *thisvalue, swig_type_info *type, int flags) { Tcl_Obj *robj = SWIG_NewPointerObj(thisvalue, type,0); /* Check to see if this pointer belongs to a class or not */ if ((type->clientdata) && (interp)) { Tcl_CmdInfo ci; char *name; name = Tcl_GetStringFromObj(robj,NULL); if (!Tcl_GetCommandInfo(interp,name, &ci) || (flags)) { swig_instance *newinst = (swig_instance *) malloc(sizeof(swig_instance)); newinst->thisptr = Tcl_DuplicateObj(robj); Tcl_IncrRefCount(newinst->thisptr); newinst->thisvalue = thisvalue; newinst->classptr = (swig_class *) type->clientdata; newinst->destroy = flags; newinst->cmdtok = Tcl_CreateObjCommand(interp, Tcl_GetStringFromObj(robj,NULL), (swig_wrapper_func) SWIG_MethodCommand, (ClientData) newinst, (swig_delete_func) SWIG_ObjectDelete); if (flags) { SWIG_Acquire(thisvalue); } } } return robj; } /* Function to create objects */ SWIGRUNTIME int SWIG_Tcl_ObjectConstructor(ClientData clientData, Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[]) { Tcl_Obj *newObj = 0; void *thisvalue = 0; swig_instance *newinst = 0; swig_class *classptr = (swig_class *) clientData; swig_wrapper cons = 0; char *name = 0; int firstarg = 0; int thisarg = 0; int destroy = 1; if (!classptr) { Tcl_SetResult(interp, (char *) "swig: internal runtime error. No class object defined.", TCL_STATIC); return TCL_ERROR; } cons = classptr->constructor; if (objc > 1) { char *s = Tcl_GetStringFromObj(objv[1],NULL); if (strcmp(s,"-this") == 0) { thisarg = 2; cons = 0; } else if (strcmp(s,"-args") == 0) { firstarg = 1; } else if (objc == 2) { firstarg = 1; name = s; } else if (objc >= 3) { char *s1; name = s; s1 = Tcl_GetStringFromObj(objv[2],NULL); if (strcmp(s1,"-this") == 0) { thisarg = 3; cons = 0; } else { firstarg = 1; } } } if (cons) { int result; result = (*cons)(0, interp, objc-firstarg, &objv[firstarg]); if (result != TCL_OK) { return result; } newObj = Tcl_DuplicateObj(Tcl_GetObjResult(interp)); if (!name) name = Tcl_GetStringFromObj(newObj,NULL); } else if (thisarg > 0) { if (thisarg < objc) { destroy = 0; newObj = Tcl_DuplicateObj(objv[thisarg]); if (!name) name = Tcl_GetStringFromObj(newObj,NULL); } else { Tcl_SetResult(interp, (char *) "wrong # args.", TCL_STATIC); return TCL_ERROR; } } else { Tcl_SetResult(interp, (char *) "No constructor available.", TCL_STATIC); return TCL_ERROR; } if (SWIG_Tcl_ConvertPtr(interp,newObj, (void **) &thisvalue, *(classptr->type), 0) != SWIG_OK) { Tcl_DecrRefCount(newObj); return TCL_ERROR; } newinst = (swig_instance *) malloc(sizeof(swig_instance)); newinst->thisptr = newObj; Tcl_IncrRefCount(newObj); newinst->thisvalue = thisvalue; newinst->classptr = classptr; newinst->destroy = destroy; if (destroy) { SWIG_Acquire(thisvalue); } newinst->cmdtok = Tcl_CreateObjCommand(interp,name, (swig_wrapper) SWIG_MethodCommand, (ClientData) newinst, (swig_delete_func) SWIG_ObjectDelete); return TCL_OK; } /* -----------------------------------------------------------------------------* * Get arguments * -----------------------------------------------------------------------------*/ SWIGRUNTIME int SWIG_Tcl_GetArgs(Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[], const char *fmt, ...) { int argno = 0, opt = 0; long tempi; double tempd; const char *c; va_list ap; void *vptr; Tcl_Obj *obj = 0; swig_type_info *ty; va_start(ap,fmt); for (c = fmt; (*c && (*c != ':') && (*c != ';')); c++,argno++) { if (*c == '|') { opt = 1; c++; } if (argno >= (objc-1)) { if (!opt) { Tcl_SetResult(interp, (char *) "Wrong number of arguments ", TCL_STATIC); goto argerror; } else { va_end(ap); return TCL_OK; } } vptr = va_arg(ap,void *); if (vptr) { if (isupper(*c)) { obj = SWIG_Tcl_GetConstantObj(Tcl_GetStringFromObj(objv[argno+1],0)); if (!obj) obj = objv[argno+1]; } else { obj = objv[argno+1]; } switch(*c) { case 'i': case 'I': case 'l': case 'L': case 'h': case 'H': case 'b': case 'B': if (Tcl_GetLongFromObj(interp,obj,&tempi) != TCL_OK) goto argerror; if ((*c == 'i') || (*c == 'I')) *((int *)vptr) = (int)tempi; else if ((*c == 'l') || (*c == 'L')) *((long *)vptr) = (long)tempi; else if ((*c == 'h') || (*c == 'H')) *((short*)vptr) = (short)tempi; else if ((*c == 'b') || (*c == 'B')) *((unsigned char *)vptr) = (unsigned char)tempi; break; case 'f': case 'F': case 'd': case 'D': if (Tcl_GetDoubleFromObj(interp,obj,&tempd) != TCL_OK) goto argerror; if ((*c == 'f') || (*c == 'F')) *((float *) vptr) = (float)tempd; else if ((*c == 'd') || (*c == 'D')) *((double*) vptr) = tempd; break; case 's': case 'S': if (*(c+1) == '#') { int *vlptr = (int *) va_arg(ap, void *); *((char **) vptr) = Tcl_GetStringFromObj(obj, vlptr); c++; } else { *((char **)vptr) = Tcl_GetStringFromObj(obj,NULL); } break; case 'c': case 'C': *((char *)vptr) = *(Tcl_GetStringFromObj(obj,NULL)); break; case 'p': case 'P': ty = (swig_type_info *) va_arg(ap, void *); if (SWIG_Tcl_ConvertPtr(interp, obj, (void **) vptr, ty, 0) != SWIG_OK) goto argerror; break; case 'o': case 'O': *((Tcl_Obj **)vptr) = objv[argno+1]; break; default: break; } } } if ((*c != ';') && ((objc-1) > argno)) { Tcl_SetResult(interp, (char *) "Wrong # args.", TCL_STATIC); goto argerror; } va_end(ap); return TCL_OK; argerror: { char temp[32]; sprintf(temp,"%d", argno+1); c = strchr(fmt,':'); if (!c) c = strchr(fmt,';'); if (!c) c = (char *)""; Tcl_AppendResult(interp,c," argument ", temp, NULL); va_end(ap); return TCL_ERROR; } } #ifdef __cplusplus #if 0 { /* cc-mode */ #endif } #endif #define SWIG_exception_fail(code, msg) do { SWIG_Error(code, msg); SWIG_fail; } while(0) #define SWIG_contract_assert(expr, msg) if (!(expr)) { SWIG_Error(SWIG_RuntimeError, msg); SWIG_fail; } else /* -------- TYPES TABLE (BEGIN) -------- */ #define SWIGTYPE_p_char swig_types[0] #define SWIGTYPE_p_obexftp_client_t swig_types[1] #define SWIGTYPE_p_obexftp_info_cb_t swig_types[2] static swig_type_info *swig_types[4]; static swig_module_info swig_module = {swig_types, 3, 0, 0, 0, 0}; #define SWIG_TypeQuery(name) SWIG_TypeQueryModule(&swig_module, &swig_module, name) #define SWIG_MangledTypeQuery(name) SWIG_MangledTypeQueryModule(&swig_module, &swig_module, name) /* -------- TYPES TABLE (END) -------- */ #define SWIG_init Obexftp_Init #define SWIG_name "obexftp" #define SWIG_prefix "" #define SWIG_version "0.0" #define SWIGVERSION 0x010333 #define SWIG_VERSION SWIGVERSION #define SWIG_as_voidptr(a) (void *)((const void *)(a)) #define SWIG_as_voidptrptr(a) ((void)SWIG_as_voidptr(*a),(void**)(a)) #ifdef __cplusplus extern "C" { #endif #ifdef MAC_TCL #pragma export on #endif SWIGEXPORT int SWIG_init(Tcl_Interp *); #ifdef MAC_TCL #pragma export off #endif #ifdef __cplusplus } #endif #include #include #include #if !defined(SWIG_NO_LLONG_MAX) # if !defined(LLONG_MAX) && defined(__GNUC__) && defined (__LONG_LONG_MAX__) # define LLONG_MAX __LONG_LONG_MAX__ # define LLONG_MIN (-LLONG_MAX - 1LL) # define ULLONG_MAX (LLONG_MAX * 2ULL + 1ULL) # endif #endif SWIGINTERNINLINE Tcl_Obj* SWIG_From_long (long value) { if (((long) INT_MIN <= value) && (value <= (long) INT_MAX)) { return Tcl_NewIntObj((int)(value)); } else { return Tcl_NewLongObj(value); } } SWIGINTERNINLINE Tcl_Obj * SWIG_From_int (int value) { return SWIG_From_long (value); } SWIGINTERN int SWIG_AsVal_long SWIG_TCL_DECL_ARGS_2(Tcl_Obj *obj, long* val) { long v; if (Tcl_GetLongFromObj(0,obj, &v) == TCL_OK) { if (val) *val = (long) v; return SWIG_OK; } return SWIG_TypeError; } SWIGINTERN int SWIG_AsVal_int SWIG_TCL_DECL_ARGS_2(Tcl_Obj * obj, int *val) { long v; int res = SWIG_AsVal_long SWIG_TCL_CALL_ARGS_2(obj, &v); if (SWIG_IsOK(res)) { if ((v < INT_MIN || v > INT_MAX)) { return SWIG_OverflowError; } else { if (val) *val = (int)(v); } } return res; } SWIGINTERN int SWIG_AsCharPtrAndSize(Tcl_Obj *obj, char** cptr, size_t* psize, int *alloc) { int len = 0; char *cstr = Tcl_GetStringFromObj(obj, &len); if (cstr) { if (cptr) *cptr = cstr; if (psize) *psize = len + 1; if (alloc) *alloc = SWIG_OLDOBJ; return SWIG_OK; } return SWIG_TypeError; } SWIGINTERN obexftp_client_t *new_obexftp_client_t(int transport){ return obexftp_open(transport, NULL, NULL, NULL); } SWIGINTERN void delete_obexftp_client_t(obexftp_client_t *self){ obexftp_close(self); } SWIGINTERN void obexftp_client_t_callback(obexftp_client_t *self,obexftp_info_cb_t infocb,void *user_data){ self->infocb = infocb; self->infocb_data = user_data; } SWIGINTERN char **obexftp_client_t_discover(obexftp_client_t *self){ return obexftp_discover(self->transport); } SWIGINTERN int obexftp_client_t_connect(obexftp_client_t *self,char *device,int port,char *src){ return obexftp_connect_src(self, src, device, port, UUID_FBS, sizeof(UUID_FBS)); } SWIGINTERN int obexftp_client_t_connectpush(obexftp_client_t *self,char *device,int port,char *src){ self->quirks &= ~OBEXFTP_SPLIT_SETPATH; return obexftp_connect_src(self, src, device, port, NULL, 0); } SWIGINTERN int obexftp_client_t_connectsync(obexftp_client_t *self,char *device,int port,char *src){ self->quirks &= ~OBEXFTP_SPLIT_SETPATH; return obexftp_connect_src(self, src, device, port, UUID_IRMC, sizeof(UUID_IRMC)); } SWIGINTERN int obexftp_client_t_disconnect(obexftp_client_t *self){ return obexftp_disconnect(self); } SWIGINTERN int obexftp_client_t_chpath(obexftp_client_t *self,char *name){ return obexftp_setpath(self, name, 0); } SWIGINTERN int obexftp_client_t_mkpath(obexftp_client_t *self,char *name){ return obexftp_setpath(self, name, 1); } SWIGINTERN int obexftp_client_t_cdup(obexftp_client_t *self){ return obexftp_setpath(self, NULL, 0); } SWIGINTERN int obexftp_client_t_cdtop(obexftp_client_t *self){ return obexftp_setpath(self, "", 0); } SWIGINTERN char *obexftp_client_t_get(obexftp_client_t *self,char *path){ (void) obexftp_get_type(self, NULL, NULL, path); return (char *)self->buf_data; } SWIGINTERN char *obexftp_client_t_list(obexftp_client_t *self,char *path){ (void) obexftp_get_type(self, XOBEX_LISTING, NULL, path); return (char *)self->buf_data; } SWIGINTERN char *obexftp_client_t_get_capability(obexftp_client_t *self,char *path){ (void) obexftp_get_type(self, XOBEX_CAPABILITY, NULL, path); return (char *)self->buf_data; } SWIGINTERN int obexftp_client_t_get_file(obexftp_client_t *self,char *path,char *localname){ return obexftp_get_type(self, NULL, localname, path); } SWIGINTERN int obexftp_client_t_put_file(obexftp_client_t *self,char *filename,char *remotename){ return obexftp_put_file(self, filename, remotename); } SWIGINTERN int SWIG_AsVal_unsigned_SS_long SWIG_TCL_DECL_ARGS_2(Tcl_Obj *obj, unsigned long *val) { long v; if (Tcl_GetLongFromObj(0,obj, &v) == TCL_OK) { if (v >= 0) { if (val) *val = (unsigned long) v; return SWIG_OK; } /* If v is negative, then this could be a negative number, or an unsigned value which doesn't fit in a signed long, so try to get it as a string so we can distinguish these cases. */ } { int len = 0; const char *nptr = Tcl_GetStringFromObj(obj, &len); if (nptr && len > 0) { char *endptr; unsigned long v; if (*nptr == '-') return SWIG_OverflowError; errno = 0; v = strtoul(nptr, &endptr,0); if (nptr[0] == '\0' || *endptr != '\0') return SWIG_TypeError; if (v == ULONG_MAX && errno == ERANGE) { errno = 0; return SWIG_OverflowError; } else { if (*endptr == '\0') { if (val) *val = v; return SWIG_OK; } } } } return SWIG_TypeError; } SWIGINTERNINLINE int SWIG_AsVal_size_t SWIG_TCL_DECL_ARGS_2(Tcl_Obj * obj, size_t *val) { unsigned long v; int res = SWIG_AsVal_unsigned_SS_long SWIG_TCL_CALL_ARGS_2(obj, val ? &v : 0); if (SWIG_IsOK(res) && val) *val = (size_t)(v); return res; } SWIGINTERN int obexftp_client_t_put_data(obexftp_client_t *self,char *data,size_t size,char *remotename){ return obexftp_put_data(self, data, size, remotename); } SWIGINTERN int obexftp_client_t_delete(obexftp_client_t *self,char *name){ return obexftp_del(self, name); } #ifdef __cplusplus extern "C" { #endif SWIGINTERN int _wrap_discover(ClientData clientData SWIGUNUSED, Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[]) { int arg1 ; char **result = 0 ; int val1 ; int ecode1 = 0 ; if (SWIG_GetArgs(interp, objc, objv,"o:discover transport ",(void *)0) == TCL_ERROR) SWIG_fail; ecode1 = SWIG_AsVal_int SWIG_TCL_CALL_ARGS_2(objv[1], &val1); if (!SWIG_IsOK(ecode1)) { SWIG_exception_fail(SWIG_ArgError(ecode1), "in method '" "discover" "', argument " "1"" of type '" "int""'"); } arg1 = (int)(val1); result = (char **)obexftp_discover(arg1); { char **p; /* (Tcl_GetObjResult(interp)) = Tcl_NewListObj(0, NULL); // not needed? */ for (p = result; p && *p; p++) Tcl_ListObjAppendElement(interp, (Tcl_GetObjResult(interp)), Tcl_NewStringObj(*p, strlen(*p))); } return TCL_OK; fail: return TCL_ERROR; } SWIGINTERN int _wrap_browsebt(ClientData clientData SWIGUNUSED, Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[]) { char *arg1 = (char *) 0 ; int arg2 ; int result; int res1 ; char *buf1 = 0 ; int alloc1 = 0 ; int val2 ; int ecode2 = 0 ; if (SWIG_GetArgs(interp, objc, objv,"oo:browsebt addr service ",(void *)0,(void *)0) == TCL_ERROR) SWIG_fail; res1 = SWIG_AsCharPtrAndSize(objv[1], &buf1, NULL, &alloc1); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "browsebt" "', argument " "1"" of type '" "char *""'"); } arg1 = (char *)(buf1); ecode2 = SWIG_AsVal_int SWIG_TCL_CALL_ARGS_2(objv[2], &val2); if (!SWIG_IsOK(ecode2)) { SWIG_exception_fail(SWIG_ArgError(ecode2), "in method '" "browsebt" "', argument " "2"" of type '" "int""'"); } arg2 = (int)(val2); result = (int)obexftp_browse_bt(arg1,arg2); Tcl_SetObjResult(interp,SWIG_From_int((int)(result))); if (alloc1 == SWIG_NEWOBJ) free((char*)buf1); return TCL_OK; fail: if (alloc1 == SWIG_NEWOBJ) free((char*)buf1); return TCL_ERROR; } SWIGINTERN int _wrap_new_client(ClientData clientData SWIGUNUSED, Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[]) { int arg1 ; obexftp_client_t *result = 0 ; int val1 ; int ecode1 = 0 ; if (SWIG_GetArgs(interp, objc, objv,"o:new_client transport ",(void *)0) == TCL_ERROR) SWIG_fail; ecode1 = SWIG_AsVal_int SWIG_TCL_CALL_ARGS_2(objv[1], &val1); if (!SWIG_IsOK(ecode1)) { SWIG_exception_fail(SWIG_ArgError(ecode1), "in method '" "new_client" "', argument " "1"" of type '" "int""'"); } arg1 = (int)(val1); result = (obexftp_client_t *)new_obexftp_client_t(arg1); Tcl_SetObjResult(interp, SWIG_NewInstanceObj( SWIG_as_voidptr(result), SWIGTYPE_p_obexftp_client_t,0)); return TCL_OK; fail: return TCL_ERROR; } SWIGINTERN int _wrap_delete_client(ClientData clientData SWIGUNUSED, Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[]) { obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; void *argp1 = 0 ; int res1 = 0 ; if (SWIG_GetArgs(interp, objc, objv,"o:delete_client self ",(void *)0) == TCL_ERROR) SWIG_fail; res1 = SWIG_ConvertPtr(objv[1], &argp1,SWIGTYPE_p_obexftp_client_t, SWIG_POINTER_DISOWN | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "delete_client" "', argument " "1"" of type '" "obexftp_client_t *""'"); } arg1 = (obexftp_client_t *)(argp1); delete_obexftp_client_t(arg1); return TCL_OK; fail: return TCL_ERROR; } SWIGINTERN int _wrap_client_callback(ClientData clientData SWIGUNUSED, Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[]) { obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; obexftp_info_cb_t arg2 ; void *arg3 = (void *) 0 ; void *argp1 = 0 ; int res1 = 0 ; void *argp2 ; int res2 = 0 ; int res3 ; if (SWIG_GetArgs(interp, objc, objv,"ooo:client_callback self infocb user_data ",(void *)0,(void *)0,(void *)0) == TCL_ERROR) SWIG_fail; res1 = SWIG_ConvertPtr(objv[1], &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "client_callback" "', argument " "1"" of type '" "obexftp_client_t *""'"); } arg1 = (obexftp_client_t *)(argp1); { res2 = SWIG_ConvertPtr(objv[2], &argp2, SWIGTYPE_p_obexftp_info_cb_t, 0 ); if (!SWIG_IsOK(res2)) { SWIG_exception_fail(SWIG_ArgError(res2), "in method '" "client_callback" "', argument " "2"" of type '" "obexftp_info_cb_t""'"); } if (!argp2) { SWIG_exception_fail(SWIG_ValueError, "invalid null reference " "in method '" "client_callback" "', argument " "2"" of type '" "obexftp_info_cb_t""'"); } else { arg2 = *((obexftp_info_cb_t *)(argp2)); } } res3 = SWIG_ConvertPtr(objv[3],SWIG_as_voidptrptr(&arg3), 0, 0); if (!SWIG_IsOK(res3)) { SWIG_exception_fail(SWIG_ArgError(res3), "in method '" "client_callback" "', argument " "3"" of type '" "void *""'"); } obexftp_client_t_callback(arg1,arg2,arg3); return TCL_OK; fail: return TCL_ERROR; } SWIGINTERN int _wrap_client_discover(ClientData clientData SWIGUNUSED, Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[]) { obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; char **result = 0 ; void *argp1 = 0 ; int res1 = 0 ; if (SWIG_GetArgs(interp, objc, objv,"o:client_discover self ",(void *)0) == TCL_ERROR) SWIG_fail; res1 = SWIG_ConvertPtr(objv[1], &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "client_discover" "', argument " "1"" of type '" "obexftp_client_t *""'"); } arg1 = (obexftp_client_t *)(argp1); result = (char **)obexftp_client_t_discover(arg1); { char **p; /* (Tcl_GetObjResult(interp)) = Tcl_NewListObj(0, NULL); // not needed? */ for (p = result; p && *p; p++) Tcl_ListObjAppendElement(interp, (Tcl_GetObjResult(interp)), Tcl_NewStringObj(*p, strlen(*p))); } return TCL_OK; fail: return TCL_ERROR; } SWIGINTERN int _wrap_client_connect(ClientData clientData SWIGUNUSED, Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[]) { obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; char *arg2 = (char *) 0 ; int arg3 ; char *arg4 = (char *) NULL ; int result; void *argp1 = 0 ; int res1 = 0 ; int res2 ; char *buf2 = 0 ; int alloc2 = 0 ; int val3 ; int ecode3 = 0 ; int res4 ; char *buf4 = 0 ; int alloc4 = 0 ; if (SWIG_GetArgs(interp, objc, objv,"ooo|o:client_connect self device port ?src? ",(void *)0,(void *)0,(void *)0,(void *)0) == TCL_ERROR) SWIG_fail; res1 = SWIG_ConvertPtr(objv[1], &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "client_connect" "', argument " "1"" of type '" "obexftp_client_t *""'"); } arg1 = (obexftp_client_t *)(argp1); res2 = SWIG_AsCharPtrAndSize(objv[2], &buf2, NULL, &alloc2); if (!SWIG_IsOK(res2)) { SWIG_exception_fail(SWIG_ArgError(res2), "in method '" "client_connect" "', argument " "2"" of type '" "char *""'"); } arg2 = (char *)(buf2); ecode3 = SWIG_AsVal_int SWIG_TCL_CALL_ARGS_2(objv[3], &val3); if (!SWIG_IsOK(ecode3)) { SWIG_exception_fail(SWIG_ArgError(ecode3), "in method '" "client_connect" "', argument " "3"" of type '" "int""'"); } arg3 = (int)(val3); if (objc > 4) { res4 = SWIG_AsCharPtrAndSize(objv[4], &buf4, NULL, &alloc4); if (!SWIG_IsOK(res4)) { SWIG_exception_fail(SWIG_ArgError(res4), "in method '" "client_connect" "', argument " "4"" of type '" "char *""'"); } arg4 = (char *)(buf4); } result = (int)obexftp_client_t_connect(arg1,arg2,arg3,arg4); Tcl_SetObjResult(interp,SWIG_From_int((int)(result))); if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); if (alloc4 == SWIG_NEWOBJ) free((char*)buf4); return TCL_OK; fail: if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); if (alloc4 == SWIG_NEWOBJ) free((char*)buf4); return TCL_ERROR; } SWIGINTERN int _wrap_client_connectpush(ClientData clientData SWIGUNUSED, Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[]) { obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; char *arg2 = (char *) 0 ; int arg3 ; char *arg4 = (char *) NULL ; int result; void *argp1 = 0 ; int res1 = 0 ; int res2 ; char *buf2 = 0 ; int alloc2 = 0 ; int val3 ; int ecode3 = 0 ; int res4 ; char *buf4 = 0 ; int alloc4 = 0 ; if (SWIG_GetArgs(interp, objc, objv,"ooo|o:client_connectpush self device port ?src? ",(void *)0,(void *)0,(void *)0,(void *)0) == TCL_ERROR) SWIG_fail; res1 = SWIG_ConvertPtr(objv[1], &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "client_connectpush" "', argument " "1"" of type '" "obexftp_client_t *""'"); } arg1 = (obexftp_client_t *)(argp1); res2 = SWIG_AsCharPtrAndSize(objv[2], &buf2, NULL, &alloc2); if (!SWIG_IsOK(res2)) { SWIG_exception_fail(SWIG_ArgError(res2), "in method '" "client_connectpush" "', argument " "2"" of type '" "char *""'"); } arg2 = (char *)(buf2); ecode3 = SWIG_AsVal_int SWIG_TCL_CALL_ARGS_2(objv[3], &val3); if (!SWIG_IsOK(ecode3)) { SWIG_exception_fail(SWIG_ArgError(ecode3), "in method '" "client_connectpush" "', argument " "3"" of type '" "int""'"); } arg3 = (int)(val3); if (objc > 4) { res4 = SWIG_AsCharPtrAndSize(objv[4], &buf4, NULL, &alloc4); if (!SWIG_IsOK(res4)) { SWIG_exception_fail(SWIG_ArgError(res4), "in method '" "client_connectpush" "', argument " "4"" of type '" "char *""'"); } arg4 = (char *)(buf4); } result = (int)obexftp_client_t_connectpush(arg1,arg2,arg3,arg4); Tcl_SetObjResult(interp,SWIG_From_int((int)(result))); if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); if (alloc4 == SWIG_NEWOBJ) free((char*)buf4); return TCL_OK; fail: if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); if (alloc4 == SWIG_NEWOBJ) free((char*)buf4); return TCL_ERROR; } SWIGINTERN int _wrap_client_connectsync(ClientData clientData SWIGUNUSED, Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[]) { obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; char *arg2 = (char *) 0 ; int arg3 ; char *arg4 = (char *) NULL ; int result; void *argp1 = 0 ; int res1 = 0 ; int res2 ; char *buf2 = 0 ; int alloc2 = 0 ; int val3 ; int ecode3 = 0 ; int res4 ; char *buf4 = 0 ; int alloc4 = 0 ; if (SWIG_GetArgs(interp, objc, objv,"ooo|o:client_connectsync self device port ?src? ",(void *)0,(void *)0,(void *)0,(void *)0) == TCL_ERROR) SWIG_fail; res1 = SWIG_ConvertPtr(objv[1], &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "client_connectsync" "', argument " "1"" of type '" "obexftp_client_t *""'"); } arg1 = (obexftp_client_t *)(argp1); res2 = SWIG_AsCharPtrAndSize(objv[2], &buf2, NULL, &alloc2); if (!SWIG_IsOK(res2)) { SWIG_exception_fail(SWIG_ArgError(res2), "in method '" "client_connectsync" "', argument " "2"" of type '" "char *""'"); } arg2 = (char *)(buf2); ecode3 = SWIG_AsVal_int SWIG_TCL_CALL_ARGS_2(objv[3], &val3); if (!SWIG_IsOK(ecode3)) { SWIG_exception_fail(SWIG_ArgError(ecode3), "in method '" "client_connectsync" "', argument " "3"" of type '" "int""'"); } arg3 = (int)(val3); if (objc > 4) { res4 = SWIG_AsCharPtrAndSize(objv[4], &buf4, NULL, &alloc4); if (!SWIG_IsOK(res4)) { SWIG_exception_fail(SWIG_ArgError(res4), "in method '" "client_connectsync" "', argument " "4"" of type '" "char *""'"); } arg4 = (char *)(buf4); } result = (int)obexftp_client_t_connectsync(arg1,arg2,arg3,arg4); Tcl_SetObjResult(interp,SWIG_From_int((int)(result))); if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); if (alloc4 == SWIG_NEWOBJ) free((char*)buf4); return TCL_OK; fail: if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); if (alloc4 == SWIG_NEWOBJ) free((char*)buf4); return TCL_ERROR; } SWIGINTERN int _wrap_client_disconnect(ClientData clientData SWIGUNUSED, Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[]) { obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; int result; void *argp1 = 0 ; int res1 = 0 ; if (SWIG_GetArgs(interp, objc, objv,"o:client_disconnect self ",(void *)0) == TCL_ERROR) SWIG_fail; res1 = SWIG_ConvertPtr(objv[1], &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "client_disconnect" "', argument " "1"" of type '" "obexftp_client_t *""'"); } arg1 = (obexftp_client_t *)(argp1); result = (int)obexftp_client_t_disconnect(arg1); Tcl_SetObjResult(interp,SWIG_From_int((int)(result))); return TCL_OK; fail: return TCL_ERROR; } SWIGINTERN int _wrap_client_chpath(ClientData clientData SWIGUNUSED, Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[]) { obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; char *arg2 = (char *) 0 ; int result; void *argp1 = 0 ; int res1 = 0 ; int res2 ; char *buf2 = 0 ; int alloc2 = 0 ; if (SWIG_GetArgs(interp, objc, objv,"oo:client_chpath self name ",(void *)0,(void *)0) == TCL_ERROR) SWIG_fail; res1 = SWIG_ConvertPtr(objv[1], &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "client_chpath" "', argument " "1"" of type '" "obexftp_client_t *""'"); } arg1 = (obexftp_client_t *)(argp1); res2 = SWIG_AsCharPtrAndSize(objv[2], &buf2, NULL, &alloc2); if (!SWIG_IsOK(res2)) { SWIG_exception_fail(SWIG_ArgError(res2), "in method '" "client_chpath" "', argument " "2"" of type '" "char *""'"); } arg2 = (char *)(buf2); result = (int)obexftp_client_t_chpath(arg1,arg2); Tcl_SetObjResult(interp,SWIG_From_int((int)(result))); if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); return TCL_OK; fail: if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); return TCL_ERROR; } SWIGINTERN int _wrap_client_mkpath(ClientData clientData SWIGUNUSED, Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[]) { obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; char *arg2 = (char *) 0 ; int result; void *argp1 = 0 ; int res1 = 0 ; int res2 ; char *buf2 = 0 ; int alloc2 = 0 ; if (SWIG_GetArgs(interp, objc, objv,"oo:client_mkpath self name ",(void *)0,(void *)0) == TCL_ERROR) SWIG_fail; res1 = SWIG_ConvertPtr(objv[1], &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "client_mkpath" "', argument " "1"" of type '" "obexftp_client_t *""'"); } arg1 = (obexftp_client_t *)(argp1); res2 = SWIG_AsCharPtrAndSize(objv[2], &buf2, NULL, &alloc2); if (!SWIG_IsOK(res2)) { SWIG_exception_fail(SWIG_ArgError(res2), "in method '" "client_mkpath" "', argument " "2"" of type '" "char *""'"); } arg2 = (char *)(buf2); result = (int)obexftp_client_t_mkpath(arg1,arg2); Tcl_SetObjResult(interp,SWIG_From_int((int)(result))); if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); return TCL_OK; fail: if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); return TCL_ERROR; } SWIGINTERN int _wrap_client_cdup(ClientData clientData SWIGUNUSED, Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[]) { obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; int result; void *argp1 = 0 ; int res1 = 0 ; if (SWIG_GetArgs(interp, objc, objv,"o:client_cdup self ",(void *)0) == TCL_ERROR) SWIG_fail; res1 = SWIG_ConvertPtr(objv[1], &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "client_cdup" "', argument " "1"" of type '" "obexftp_client_t *""'"); } arg1 = (obexftp_client_t *)(argp1); result = (int)obexftp_client_t_cdup(arg1); Tcl_SetObjResult(interp,SWIG_From_int((int)(result))); return TCL_OK; fail: return TCL_ERROR; } SWIGINTERN int _wrap_client_cdtop(ClientData clientData SWIGUNUSED, Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[]) { obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; int result; void *argp1 = 0 ; int res1 = 0 ; if (SWIG_GetArgs(interp, objc, objv,"o:client_cdtop self ",(void *)0) == TCL_ERROR) SWIG_fail; res1 = SWIG_ConvertPtr(objv[1], &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "client_cdtop" "', argument " "1"" of type '" "obexftp_client_t *""'"); } arg1 = (obexftp_client_t *)(argp1); result = (int)obexftp_client_t_cdtop(arg1); Tcl_SetObjResult(interp,SWIG_From_int((int)(result))); return TCL_OK; fail: return TCL_ERROR; } SWIGINTERN int _wrap_client_get(ClientData clientData SWIGUNUSED, Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[]) { obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; char *arg2 = (char *) 0 ; char *result = 0 ; void *argp1 = 0 ; int res1 = 0 ; int res2 ; char *buf2 = 0 ; int alloc2 = 0 ; if (SWIG_GetArgs(interp, objc, objv,"oo:client_get self path ",(void *)0,(void *)0) == TCL_ERROR) SWIG_fail; res1 = SWIG_ConvertPtr(objv[1], &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "client_get" "', argument " "1"" of type '" "obexftp_client_t *""'"); } arg1 = (obexftp_client_t *)(argp1); res2 = SWIG_AsCharPtrAndSize(objv[2], &buf2, NULL, &alloc2); if (!SWIG_IsOK(res2)) { SWIG_exception_fail(SWIG_ArgError(res2), "in method '" "client_get" "', argument " "2"" of type '" "char *""'"); } arg2 = (char *)(buf2); result = (char *)obexftp_client_t_get(arg1,arg2); { Tcl_SetObjResult(interp,Tcl_NewStringObj((char *)arg1->buf_data,arg1->buf_size)); } if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); return TCL_OK; fail: if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); return TCL_ERROR; } SWIGINTERN int _wrap_client_list(ClientData clientData SWIGUNUSED, Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[]) { obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; char *arg2 = (char *) NULL ; char *result = 0 ; void *argp1 = 0 ; int res1 = 0 ; int res2 ; char *buf2 = 0 ; int alloc2 = 0 ; if (SWIG_GetArgs(interp, objc, objv,"o|o:client_list self ?path? ",(void *)0,(void *)0) == TCL_ERROR) SWIG_fail; res1 = SWIG_ConvertPtr(objv[1], &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "client_list" "', argument " "1"" of type '" "obexftp_client_t *""'"); } arg1 = (obexftp_client_t *)(argp1); if (objc > 2) { res2 = SWIG_AsCharPtrAndSize(objv[2], &buf2, NULL, &alloc2); if (!SWIG_IsOK(res2)) { SWIG_exception_fail(SWIG_ArgError(res2), "in method '" "client_list" "', argument " "2"" of type '" "char *""'"); } arg2 = (char *)(buf2); } result = (char *)obexftp_client_t_list(arg1,arg2); { Tcl_SetObjResult(interp,Tcl_NewStringObj((char *)arg1->buf_data,arg1->buf_size)); } if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); return TCL_OK; fail: if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); return TCL_ERROR; } SWIGINTERN int _wrap_client_get_capability(ClientData clientData SWIGUNUSED, Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[]) { obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; char *arg2 = (char *) NULL ; char *result = 0 ; void *argp1 = 0 ; int res1 = 0 ; int res2 ; char *buf2 = 0 ; int alloc2 = 0 ; if (SWIG_GetArgs(interp, objc, objv,"o|o:client_get_capability self ?path? ",(void *)0,(void *)0) == TCL_ERROR) SWIG_fail; res1 = SWIG_ConvertPtr(objv[1], &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "client_get_capability" "', argument " "1"" of type '" "obexftp_client_t *""'"); } arg1 = (obexftp_client_t *)(argp1); if (objc > 2) { res2 = SWIG_AsCharPtrAndSize(objv[2], &buf2, NULL, &alloc2); if (!SWIG_IsOK(res2)) { SWIG_exception_fail(SWIG_ArgError(res2), "in method '" "client_get_capability" "', argument " "2"" of type '" "char *""'"); } arg2 = (char *)(buf2); } result = (char *)obexftp_client_t_get_capability(arg1,arg2); { Tcl_SetObjResult(interp,Tcl_NewStringObj((char *)arg1->buf_data,arg1->buf_size)); } if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); return TCL_OK; fail: if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); return TCL_ERROR; } SWIGINTERN int _wrap_client_get_file(ClientData clientData SWIGUNUSED, Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[]) { obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; char *arg2 = (char *) 0 ; char *arg3 = (char *) 0 ; int result; void *argp1 = 0 ; int res1 = 0 ; int res2 ; char *buf2 = 0 ; int alloc2 = 0 ; int res3 ; char *buf3 = 0 ; int alloc3 = 0 ; if (SWIG_GetArgs(interp, objc, objv,"ooo:client_get_file self path localname ",(void *)0,(void *)0,(void *)0) == TCL_ERROR) SWIG_fail; res1 = SWIG_ConvertPtr(objv[1], &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "client_get_file" "', argument " "1"" of type '" "obexftp_client_t *""'"); } arg1 = (obexftp_client_t *)(argp1); res2 = SWIG_AsCharPtrAndSize(objv[2], &buf2, NULL, &alloc2); if (!SWIG_IsOK(res2)) { SWIG_exception_fail(SWIG_ArgError(res2), "in method '" "client_get_file" "', argument " "2"" of type '" "char *""'"); } arg2 = (char *)(buf2); res3 = SWIG_AsCharPtrAndSize(objv[3], &buf3, NULL, &alloc3); if (!SWIG_IsOK(res3)) { SWIG_exception_fail(SWIG_ArgError(res3), "in method '" "client_get_file" "', argument " "3"" of type '" "char *""'"); } arg3 = (char *)(buf3); result = (int)obexftp_client_t_get_file(arg1,arg2,arg3); Tcl_SetObjResult(interp,SWIG_From_int((int)(result))); if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); if (alloc3 == SWIG_NEWOBJ) free((char*)buf3); return TCL_OK; fail: if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); if (alloc3 == SWIG_NEWOBJ) free((char*)buf3); return TCL_ERROR; } SWIGINTERN int _wrap_client_put_file(ClientData clientData SWIGUNUSED, Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[]) { obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; char *arg2 = (char *) 0 ; char *arg3 = (char *) NULL ; int result; void *argp1 = 0 ; int res1 = 0 ; int res2 ; char *buf2 = 0 ; int alloc2 = 0 ; int res3 ; char *buf3 = 0 ; int alloc3 = 0 ; if (SWIG_GetArgs(interp, objc, objv,"oo|o:client_put_file self filename ?remotename? ",(void *)0,(void *)0,(void *)0) == TCL_ERROR) SWIG_fail; res1 = SWIG_ConvertPtr(objv[1], &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "client_put_file" "', argument " "1"" of type '" "obexftp_client_t *""'"); } arg1 = (obexftp_client_t *)(argp1); res2 = SWIG_AsCharPtrAndSize(objv[2], &buf2, NULL, &alloc2); if (!SWIG_IsOK(res2)) { SWIG_exception_fail(SWIG_ArgError(res2), "in method '" "client_put_file" "', argument " "2"" of type '" "char *""'"); } arg2 = (char *)(buf2); if (objc > 3) { res3 = SWIG_AsCharPtrAndSize(objv[3], &buf3, NULL, &alloc3); if (!SWIG_IsOK(res3)) { SWIG_exception_fail(SWIG_ArgError(res3), "in method '" "client_put_file" "', argument " "3"" of type '" "char *""'"); } arg3 = (char *)(buf3); } result = (int)obexftp_client_t_put_file(arg1,arg2,arg3); Tcl_SetObjResult(interp,SWIG_From_int((int)(result))); if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); if (alloc3 == SWIG_NEWOBJ) free((char*)buf3); return TCL_OK; fail: if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); if (alloc3 == SWIG_NEWOBJ) free((char*)buf3); return TCL_ERROR; } SWIGINTERN int _wrap_client_put_data(ClientData clientData SWIGUNUSED, Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[]) { obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; char *arg2 = (char *) 0 ; size_t arg3 ; char *arg4 = (char *) NULL ; int result; void *argp1 = 0 ; int res1 = 0 ; int res4 ; char *buf4 = 0 ; int alloc4 = 0 ; if (SWIG_GetArgs(interp, objc, objv,"oo|o:client_put_data self data ?size? ?remotename? ",(void *)0,(void *)0,(void *)0) == TCL_ERROR) SWIG_fail; res1 = SWIG_ConvertPtr(objv[1], &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "client_put_data" "', argument " "1"" of type '" "obexftp_client_t *""'"); } arg1 = (obexftp_client_t *)(argp1); { /* Danger Wil Robinson */ arg2 = Tcl_GetStringFromObj(objv[2],&arg3); } if (objc > 3) { res4 = SWIG_AsCharPtrAndSize(objv[3], &buf4, NULL, &alloc4); if (!SWIG_IsOK(res4)) { SWIG_exception_fail(SWIG_ArgError(res4), "in method '" "client_put_data" "', argument " "4"" of type '" "char *""'"); } arg4 = (char *)(buf4); } result = (int)obexftp_client_t_put_data(arg1,arg2,arg3,arg4); Tcl_SetObjResult(interp,SWIG_From_int((int)(result))); if (alloc4 == SWIG_NEWOBJ) free((char*)buf4); return TCL_OK; fail: if (alloc4 == SWIG_NEWOBJ) free((char*)buf4); return TCL_ERROR; } SWIGINTERN int _wrap_client_delete(ClientData clientData SWIGUNUSED, Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[]) { obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; char *arg2 = (char *) 0 ; int result; void *argp1 = 0 ; int res1 = 0 ; int res2 ; char *buf2 = 0 ; int alloc2 = 0 ; if (SWIG_GetArgs(interp, objc, objv,"oo:client_delete self name ",(void *)0,(void *)0) == TCL_ERROR) SWIG_fail; res1 = SWIG_ConvertPtr(objv[1], &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "client_delete" "', argument " "1"" of type '" "obexftp_client_t *""'"); } arg1 = (obexftp_client_t *)(argp1); res2 = SWIG_AsCharPtrAndSize(objv[2], &buf2, NULL, &alloc2); if (!SWIG_IsOK(res2)) { SWIG_exception_fail(SWIG_ArgError(res2), "in method '" "client_delete" "', argument " "2"" of type '" "char *""'"); } arg2 = (char *)(buf2); result = (int)obexftp_client_t_delete(arg1,arg2); Tcl_SetObjResult(interp,SWIG_From_int((int)(result))); if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); return TCL_OK; fail: if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); return TCL_ERROR; } SWIGINTERN void swig_delete_client(void *obj) { obexftp_client_t *arg1 = (obexftp_client_t *) obj; delete_obexftp_client_t(arg1); } static swig_method swig_obexftp_client_t_methods[] = { {"callback", _wrap_client_callback}, {"discover", _wrap_client_discover}, {"connect", _wrap_client_connect}, {"connectpush", _wrap_client_connectpush}, {"connectsync", _wrap_client_connectsync}, {"disconnect", _wrap_client_disconnect}, {"chpath", _wrap_client_chpath}, {"mkpath", _wrap_client_mkpath}, {"cdup", _wrap_client_cdup}, {"cdtop", _wrap_client_cdtop}, {"get", _wrap_client_get}, {"list", _wrap_client_list}, {"get_capability", _wrap_client_get_capability}, {"get_file", _wrap_client_get_file}, {"put_file", _wrap_client_put_file}, {"put_data", _wrap_client_put_data}, {"delete", _wrap_client_delete}, {0,0} }; static swig_attribute swig_obexftp_client_t_attributes[] = { {0,0,0} }; static swig_class *swig_obexftp_client_t_bases[] = {0}; static const char * swig_obexftp_client_t_base_names[] = {0}; static swig_class _wrap_class_obexftp_client_t = { "client", &SWIGTYPE_p_obexftp_client_t,_wrap_new_client, swig_delete_client, swig_obexftp_client_t_methods, swig_obexftp_client_t_attributes, swig_obexftp_client_t_bases,swig_obexftp_client_t_base_names, &swig_module }; static swig_command_info swig_commands[] = { { SWIG_prefix "discover", (swig_wrapper_func) _wrap_discover, NULL}, { SWIG_prefix "browsebt", (swig_wrapper_func) _wrap_browsebt, NULL}, { SWIG_prefix "new_client", (swig_wrapper_func) _wrap_new_client, NULL}, { SWIG_prefix "delete_client", (swig_wrapper_func) _wrap_delete_client, NULL}, { SWIG_prefix "client_callback", (swig_wrapper_func) _wrap_client_callback, NULL}, { SWIG_prefix "client_discover", (swig_wrapper_func) _wrap_client_discover, NULL}, { SWIG_prefix "client_connect", (swig_wrapper_func) _wrap_client_connect, NULL}, { SWIG_prefix "client_connectpush", (swig_wrapper_func) _wrap_client_connectpush, NULL}, { SWIG_prefix "client_connectsync", (swig_wrapper_func) _wrap_client_connectsync, NULL}, { SWIG_prefix "client_disconnect", (swig_wrapper_func) _wrap_client_disconnect, NULL}, { SWIG_prefix "client_chpath", (swig_wrapper_func) _wrap_client_chpath, NULL}, { SWIG_prefix "client_mkpath", (swig_wrapper_func) _wrap_client_mkpath, NULL}, { SWIG_prefix "client_cdup", (swig_wrapper_func) _wrap_client_cdup, NULL}, { SWIG_prefix "client_cdtop", (swig_wrapper_func) _wrap_client_cdtop, NULL}, { SWIG_prefix "client_get", (swig_wrapper_func) _wrap_client_get, NULL}, { SWIG_prefix "client_list", (swig_wrapper_func) _wrap_client_list, NULL}, { SWIG_prefix "client_get_capability", (swig_wrapper_func) _wrap_client_get_capability, NULL}, { SWIG_prefix "client_get_file", (swig_wrapper_func) _wrap_client_get_file, NULL}, { SWIG_prefix "client_put_file", (swig_wrapper_func) _wrap_client_put_file, NULL}, { SWIG_prefix "client_put_data", (swig_wrapper_func) _wrap_client_put_data, NULL}, { SWIG_prefix "client_delete", (swig_wrapper_func) _wrap_client_delete, NULL}, { SWIG_prefix "client", (swig_wrapper_func) SWIG_ObjectConstructor, (ClientData)&_wrap_class_obexftp_client_t}, {0, 0, 0} }; static swig_var_info swig_variables[] = { {0,0,0,0} }; static swig_const_info swig_constants[] = { {0,0,0,0,0,0} }; /* -------- TYPE CONVERSION AND EQUIVALENCE RULES (BEGIN) -------- */ static swig_type_info _swigt__p_char = {"_p_char", "char *", 0, 0, (void*)0, 0}; static swig_type_info _swigt__p_obexftp_client_t = {"_p_obexftp_client_t", "obexftp_client_t *", 0, 0, (void*)&_wrap_class_obexftp_client_t, 0}; static swig_type_info _swigt__p_obexftp_info_cb_t = {"_p_obexftp_info_cb_t", "obexftp_info_cb_t *", 0, 0, (void*)0, 0}; static swig_type_info *swig_type_initial[] = { &_swigt__p_char, &_swigt__p_obexftp_client_t, &_swigt__p_obexftp_info_cb_t, }; static swig_cast_info _swigc__p_char[] = { {&_swigt__p_char, 0, 0, 0},{0, 0, 0, 0}}; static swig_cast_info _swigc__p_obexftp_client_t[] = { {&_swigt__p_obexftp_client_t, 0, 0, 0},{0, 0, 0, 0}}; static swig_cast_info _swigc__p_obexftp_info_cb_t[] = { {&_swigt__p_obexftp_info_cb_t, 0, 0, 0},{0, 0, 0, 0}}; static swig_cast_info *swig_cast_initial[] = { _swigc__p_char, _swigc__p_obexftp_client_t, _swigc__p_obexftp_info_cb_t, }; /* -------- TYPE CONVERSION AND EQUIVALENCE RULES (END) -------- */ #ifdef __cplusplus } #endif /* ----------------------------------------------------------------------------- * Type initialization: * This problem is tough by the requirement that no dynamic * memory is used. Also, since swig_type_info structures store pointers to * swig_cast_info structures and swig_cast_info structures store pointers back * to swig_type_info structures, we need some lookup code at initialization. * The idea is that swig generates all the structures that are needed. * The runtime then collects these partially filled structures. * The SWIG_InitializeModule function takes these initial arrays out of * swig_module, and does all the lookup, filling in the swig_module.types * array with the correct data and linking the correct swig_cast_info * structures together. * * The generated swig_type_info structures are assigned staticly to an initial * array. We just loop through that array, and handle each type individually. * First we lookup if this type has been already loaded, and if so, use the * loaded structure instead of the generated one. Then we have to fill in the * cast linked list. The cast data is initially stored in something like a * two-dimensional array. Each row corresponds to a type (there are the same * number of rows as there are in the swig_type_initial array). Each entry in * a column is one of the swig_cast_info structures for that type. * The cast_initial array is actually an array of arrays, because each row has * a variable number of columns. So to actually build the cast linked list, * we find the array of casts associated with the type, and loop through it * adding the casts to the list. The one last trick we need to do is making * sure the type pointer in the swig_cast_info struct is correct. * * First off, we lookup the cast->type name to see if it is already loaded. * There are three cases to handle: * 1) If the cast->type has already been loaded AND the type we are adding * casting info to has not been loaded (it is in this module), THEN we * replace the cast->type pointer with the type pointer that has already * been loaded. * 2) If BOTH types (the one we are adding casting info to, and the * cast->type) are loaded, THEN the cast info has already been loaded by * the previous module so we just ignore it. * 3) Finally, if cast->type has not already been loaded, then we add that * swig_cast_info to the linked list (because the cast->type) pointer will * be correct. * ----------------------------------------------------------------------------- */ #ifdef __cplusplus extern "C" { #if 0 } /* c-mode */ #endif #endif #if 0 #define SWIGRUNTIME_DEBUG #endif SWIGRUNTIME void SWIG_InitializeModule(void *clientdata) { size_t i; swig_module_info *module_head, *iter; int found; clientdata = clientdata; /* check to see if the circular list has been setup, if not, set it up */ if (swig_module.next==0) { /* Initialize the swig_module */ swig_module.type_initial = swig_type_initial; swig_module.cast_initial = swig_cast_initial; swig_module.next = &swig_module; } /* Try and load any already created modules */ module_head = SWIG_GetModule(clientdata); if (!module_head) { /* This is the first module loaded for this interpreter */ /* so set the swig module into the interpreter */ SWIG_SetModule(clientdata, &swig_module); module_head = &swig_module; } else { /* the interpreter has loaded a SWIG module, but has it loaded this one? */ found=0; iter=module_head; do { if (iter==&swig_module) { found=1; break; } iter=iter->next; } while (iter!= module_head); /* if the is found in the list, then all is done and we may leave */ if (found) return; /* otherwise we must add out module into the list */ swig_module.next = module_head->next; module_head->next = &swig_module; } /* Now work on filling in swig_module.types */ #ifdef SWIGRUNTIME_DEBUG printf("SWIG_InitializeModule: size %d\n", swig_module.size); #endif for (i = 0; i < swig_module.size; ++i) { swig_type_info *type = 0; swig_type_info *ret; swig_cast_info *cast; #ifdef SWIGRUNTIME_DEBUG printf("SWIG_InitializeModule: type %d %s\n", i, swig_module.type_initial[i]->name); #endif /* if there is another module already loaded */ if (swig_module.next != &swig_module) { type = SWIG_MangledTypeQueryModule(swig_module.next, &swig_module, swig_module.type_initial[i]->name); } if (type) { /* Overwrite clientdata field */ #ifdef SWIGRUNTIME_DEBUG printf("SWIG_InitializeModule: found type %s\n", type->name); #endif if (swig_module.type_initial[i]->clientdata) { type->clientdata = swig_module.type_initial[i]->clientdata; #ifdef SWIGRUNTIME_DEBUG printf("SWIG_InitializeModule: found and overwrite type %s \n", type->name); #endif } } else { type = swig_module.type_initial[i]; } /* Insert casting types */ cast = swig_module.cast_initial[i]; while (cast->type) { /* Don't need to add information already in the list */ ret = 0; #ifdef SWIGRUNTIME_DEBUG printf("SWIG_InitializeModule: look cast %s\n", cast->type->name); #endif if (swig_module.next != &swig_module) { ret = SWIG_MangledTypeQueryModule(swig_module.next, &swig_module, cast->type->name); #ifdef SWIGRUNTIME_DEBUG if (ret) printf("SWIG_InitializeModule: found cast %s\n", ret->name); #endif } if (ret) { if (type == swig_module.type_initial[i]) { #ifdef SWIGRUNTIME_DEBUG printf("SWIG_InitializeModule: skip old type %s\n", ret->name); #endif cast->type = ret; ret = 0; } else { /* Check for casting already in the list */ swig_cast_info *ocast = SWIG_TypeCheck(ret->name, type); #ifdef SWIGRUNTIME_DEBUG if (ocast) printf("SWIG_InitializeModule: skip old cast %s\n", ret->name); #endif if (!ocast) ret = 0; } } if (!ret) { #ifdef SWIGRUNTIME_DEBUG printf("SWIG_InitializeModule: adding cast %s\n", cast->type->name); #endif if (type->cast) { type->cast->prev = cast; cast->next = type->cast; } type->cast = cast; } cast++; } /* Set entry in modules->types array equal to the type */ swig_module.types[i] = type; } swig_module.types[i] = 0; #ifdef SWIGRUNTIME_DEBUG printf("**** SWIG_InitializeModule: Cast List ******\n"); for (i = 0; i < swig_module.size; ++i) { int j = 0; swig_cast_info *cast = swig_module.cast_initial[i]; printf("SWIG_InitializeModule: type %d %s\n", i, swig_module.type_initial[i]->name); while (cast->type) { printf("SWIG_InitializeModule: cast type %s\n", cast->type->name); cast++; ++j; } printf("---- Total casts: %d\n",j); } printf("**** SWIG_InitializeModule: Cast List ******\n"); #endif } /* This function will propagate the clientdata field of type to * any new swig_type_info structures that have been added into the list * of equivalent types. It is like calling * SWIG_TypeClientData(type, clientdata) a second time. */ SWIGRUNTIME void SWIG_PropagateClientData(void) { size_t i; swig_cast_info *equiv; static int init_run = 0; if (init_run) return; init_run = 1; for (i = 0; i < swig_module.size; i++) { if (swig_module.types[i]->clientdata) { equiv = swig_module.types[i]->cast; while (equiv) { if (!equiv->converter) { if (equiv->type && !equiv->type->clientdata) SWIG_TypeClientData(equiv->type, swig_module.types[i]->clientdata); } equiv = equiv->next; } } } } #ifdef __cplusplus #if 0 { /* c-mode */ #endif } #endif #ifdef __cplusplus extern "C" { #endif /* ----------------------------------------------------------------------------- * constants/methods manipulation * ----------------------------------------------------------------------------- */ /* Install Constants */ SWIGINTERN void SWIG_Tcl_InstallConstants(Tcl_Interp *interp, swig_const_info constants[]) { int i; Tcl_Obj *obj; if (!swigconstTableinit) { Tcl_InitHashTable(&swigconstTable, TCL_STRING_KEYS); swigconstTableinit = 1; } for (i = 0; constants[i].type; i++) { switch(constants[i].type) { case SWIG_TCL_POINTER: obj = SWIG_NewPointerObj(constants[i].pvalue, *(constants[i]).ptype,0); break; case SWIG_TCL_BINARY: obj = SWIG_NewPackedObj(constants[i].pvalue, constants[i].lvalue, *(constants[i].ptype)); break; default: obj = 0; break; } if (obj) { SWIG_Tcl_SetConstantObj(interp, constants[i].name, obj); } } } #ifdef __cplusplus } #endif /* -----------------------------------------------------------------------------* * Partial Init method * -----------------------------------------------------------------------------*/ SWIGEXPORT int SWIG_init(Tcl_Interp *interp) { int i; if (interp == 0) return TCL_ERROR; #ifdef USE_TCL_STUBS if (Tcl_InitStubs(interp, (char*)"8.1", 0) == NULL) { return TCL_ERROR; } #endif Tcl_PkgProvide(interp, (char*)SWIG_name, (char*)SWIG_version); #ifdef SWIG_namespace Tcl_Eval(interp, "namespace eval " SWIG_namespace " { }"); #endif SWIG_InitializeModule((void *) interp); SWIG_PropagateClientData(); for (i = 0; swig_commands[i].name; i++) { Tcl_CreateObjCommand(interp, (char *) swig_commands[i].name, (swig_wrapper_func) swig_commands[i].wrapper, swig_commands[i].clientdata, NULL); } for (i = 0; swig_variables[i].name; i++) { Tcl_SetVar(interp, (char *) swig_variables[i].name, (char *) "", TCL_GLOBAL_ONLY); Tcl_TraceVar(interp, (char *) swig_variables[i].name, TCL_TRACE_READS | TCL_GLOBAL_ONLY, (Tcl_VarTraceProc *) swig_variables[i].get, (ClientData) swig_variables[i].addr); Tcl_TraceVar(interp, (char *) swig_variables[i].name, TCL_TRACE_WRITES | TCL_GLOBAL_ONLY, (Tcl_VarTraceProc *) swig_variables[i].set, (ClientData) swig_variables[i].addr); } SWIG_Tcl_InstallConstants(interp, swig_constants); SWIG_Tcl_SetConstantObj(interp, "IRDA", SWIG_From_int((int)(OBEX_TRANS_IRDA))); SWIG_Tcl_SetConstantObj(interp, "INET", SWIG_From_int((int)(OBEX_TRANS_INET))); SWIG_Tcl_SetConstantObj(interp, "CABLE", SWIG_From_int((int)(OBEX_TRANS_CUSTOM))); SWIG_Tcl_SetConstantObj(interp, "BLUETOOTH", SWIG_From_int((int)(OBEX_TRANS_BLUETOOTH))); SWIG_Tcl_SetConstantObj(interp, "USB", SWIG_From_int((int)(OBEX_TRANS_USB))); SWIG_Tcl_SetConstantObj(interp, "SYNC", SWIG_From_int((int)(OBEX_SYNC_SERVICE))); SWIG_Tcl_SetConstantObj(interp, "PUSH", SWIG_From_int((int)(OBEX_PUSH_SERVICE))); SWIG_Tcl_SetConstantObj(interp, "FTP", SWIG_From_int((int)(OBEX_FTP_SERVICE))); return TCL_OK; } SWIGEXPORT int Obexftp_SafeInit(Tcl_Interp *interp) { return SWIG_init(interp); } obexftp-0.23/swig/tcl/Makefile.in0000644000076600000240000004174011146600665013640 00000000000000# Makefile.in generated by automake 1.9.6 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = ../.. am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = swig/tcl DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/iconv.m4 \ $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/acinclude.m4 \ $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; am__installdirs = "$(DESTDIR)$(libdir)" libLTLIBRARIES_INSTALL = $(INSTALL) LTLIBRARIES = $(lib_LTLIBRARIES) obexftp_la_DEPENDENCIES = $(top_builddir)/obexftp/libobexftp.la \ $(top_builddir)/multicobex/libmulticobex.la \ $(top_builddir)/bfb/libbfb.la am_obexftp_la_OBJECTS = obexftp_la-tcl_wrap.lo obexftp_la_OBJECTS = $(am_obexftp_la_OBJECTS) DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) depcomp = $(SHELL) $(top_srcdir)/depcomp am__depfiles_maybe = depfiles COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ $(AM_LDFLAGS) $(LDFLAGS) -o $@ SOURCES = $(obexftp_la_SOURCES) DIST_SOURCES = $(obexftp_la_SOURCES) ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ BFB_VERSION = @BFB_VERSION@ BLUETOOTH_CFLAGS = @BLUETOOTH_CFLAGS@ BLUETOOTH_LIBS = @BLUETOOTH_LIBS@ BUILD_DOCS_FALSE = @BUILD_DOCS_FALSE@ BUILD_DOCS_TRUE = @BUILD_DOCS_TRUE@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DSYMUTIL = @DSYMUTIL@ ECHO = @ECHO@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ ENABLE_PERL_FALSE = @ENABLE_PERL_FALSE@ ENABLE_PERL_TRUE = @ENABLE_PERL_TRUE@ ENABLE_PYTHON_FALSE = @ENABLE_PYTHON_FALSE@ ENABLE_PYTHON_TRUE = @ENABLE_PYTHON_TRUE@ ENABLE_RUBY_FALSE = @ENABLE_RUBY_FALSE@ ENABLE_RUBY_TRUE = @ENABLE_RUBY_TRUE@ ENABLE_SWIG_FALSE = @ENABLE_SWIG_FALSE@ ENABLE_SWIG_TRUE = @ENABLE_SWIG_TRUE@ ENABLE_TCL_FALSE = @ENABLE_TCL_FALSE@ ENABLE_TCL_TRUE = @ENABLE_TCL_TRUE@ EXEEXT = @EXEEXT@ EXTRA_LIBS = @EXTRA_LIBS@ F77 = @F77@ FFLAGS = @FFLAGS@ GREP = @GREP@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LDFLAGS = @LDFLAGS@ LIBICONV = @LIBICONV@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LN_S = @LN_S@ LTLIBICONV = @LTLIBICONV@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MULTICOBEX_VERSION = @MULTICOBEX_VERSION@ NMEDIT = @NMEDIT@ OBEXFTP_VERSION = @OBEXFTP_VERSION@ OBJEXT = @OBJEXT@ OPENOBEX_CFLAGS = @OPENOBEX_CFLAGS@ OPENOBEX_LIBS = @OPENOBEX_LIBS@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ PKG_CONFIG = @PKG_CONFIG@ PYTHON = @PYTHON@ PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@ PYTHON_PLATFORM = @PYTHON_PLATFORM@ PYTHON_PREFIX = @PYTHON_PREFIX@ PYTHON_VERSION = @PYTHON_VERSION@ RANLIB = @RANLIB@ REQUIRES = @REQUIRES@ RUBY = @RUBY@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ SWIG = @SWIG@ SWIG_LIB = @SWIG_LIB@ TCLSH = @TCLSH@ VERSION = @VERSION@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_F77 = @ac_ct_F77@ ac_perl_enabled = @ac_perl_enabled@ ac_python_enabled = @ac_python_enabled@ ac_ruby_enabled = @ac_ruby_enabled@ ac_tcl_enabled = @ac_tcl_enabled@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ pkgpyexecdir = @pkgpyexecdir@ pkgpythondir = @pkgpythondir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ pyexecdir = @pyexecdir@ pythondir = @pythondir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ lib_LTLIBRARIES = obexftp.la obexftp_la_SOURCES = tcl_wrap.c obexftp_la_CFLAGS = -I$(top_srcdir) -I$(oldincludedir)/tcl obexftp_la_LDFLAGS = -module obexftp_la_LIBADD = $(top_builddir)/obexftp/libobexftp.la \ $(top_builddir)/multicobex/libmulticobex.la \ $(top_builddir)/bfb/libbfb.la \ @OPENOBEX_LIBS@ @ENABLE_SWIG_TRUE@MOSTLYCLEANFILES = tcl_wrap.c all: all-am .SUFFIXES: .SUFFIXES: .c .lo .o .obj $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu swig/tcl/Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --gnu swig/tcl/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh install-libLTLIBRARIES: $(lib_LTLIBRARIES) @$(NORMAL_INSTALL) test -z "$(libdir)" || $(mkdir_p) "$(DESTDIR)$(libdir)" @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ if test -f $$p; then \ f=$(am__strip_dir) \ echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \ $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \ else :; fi; \ done uninstall-libLTLIBRARIES: @$(NORMAL_UNINSTALL) @set -x; list='$(lib_LTLIBRARIES)'; for p in $$list; do \ p=$(am__strip_dir) \ echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \ $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \ done clean-libLTLIBRARIES: -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ test "$$dir" != "$$p" || dir=.; \ echo "rm -f \"$${dir}/so_locations\""; \ rm -f "$${dir}/so_locations"; \ done obexftp.la: $(obexftp_la_OBJECTS) $(obexftp_la_DEPENDENCIES) $(LINK) -rpath $(libdir) $(obexftp_la_LDFLAGS) $(obexftp_la_OBJECTS) $(obexftp_la_LIBADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/obexftp_la-tcl_wrap.Plo@am__quote@ .c.o: @am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ @am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c $< .c.obj: @am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ @am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` .c.lo: @am__fastdepCC_TRUE@ if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ @am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< obexftp_la-tcl_wrap.lo: tcl_wrap.c @am__fastdepCC_TRUE@ if $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(obexftp_la_CFLAGS) $(CFLAGS) -MT obexftp_la-tcl_wrap.lo -MD -MP -MF "$(DEPDIR)/obexftp_la-tcl_wrap.Tpo" -c -o obexftp_la-tcl_wrap.lo `test -f 'tcl_wrap.c' || echo '$(srcdir)/'`tcl_wrap.c; \ @am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/obexftp_la-tcl_wrap.Tpo" "$(DEPDIR)/obexftp_la-tcl_wrap.Plo"; else rm -f "$(DEPDIR)/obexftp_la-tcl_wrap.Tpo"; exit 1; fi @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='tcl_wrap.c' object='obexftp_la-tcl_wrap.lo' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(obexftp_la_CFLAGS) $(CFLAGS) -c -o obexftp_la-tcl_wrap.lo `test -f 'tcl_wrap.c' || echo '$(srcdir)/'`tcl_wrap.c mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool uninstall-info-am: ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ mkid -fID $$unique tags: TAGS TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique; \ fi ctags: CTAGS CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(CTAGS_ARGS)$$tags$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ list='$(DISTFILES)'; for file in $$list; do \ case $$file in \ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ esac; \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ dir="/$$dir"; \ $(mkdir_p) "$(distdir)$$dir"; \ else \ dir=''; \ fi; \ if test -d $$d/$$file; then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(LTLIBRARIES) installdirs: for dir in "$(DESTDIR)$(libdir)"; do \ test -z "$$dir" || $(mkdir_p) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES) clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \ mostlyclean-am distclean: distclean-am -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-libtool distclean-tags dvi: dvi-am dvi-am: html: html-am info: info-am info-am: install-data-am: install-exec-am: install-libLTLIBRARIES install-info: install-info-am install-man: installcheck-am: maintainer-clean: maintainer-clean-am -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-info-am uninstall-libLTLIBRARIES .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ clean-libLTLIBRARIES clean-libtool ctags distclean \ distclean-compile distclean-generic distclean-libtool \ distclean-tags distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-exec \ install-exec-am install-info install-info-am \ install-libLTLIBRARIES install-man install-strip installcheck \ installcheck-am installdirs maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-compile \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags uninstall uninstall-am uninstall-info-am \ uninstall-libLTLIBRARIES @ENABLE_SWIG_TRUE@tcl_wrap.c: $(srcdir)/../client.i $(srcdir)/../charmap.i @ENABLE_SWIG_TRUE@ $(SWIG) -tcl -module obexftp -I$(top_srcdir) -o $@ $(srcdir)/../client.i # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: obexftp-0.23/swig/tcl/Makefile.am0000644000076600000240000000075711146600644013627 00000000000000lib_LTLIBRARIES = obexftp.la obexftp_la_SOURCES = tcl_wrap.c obexftp_la_CFLAGS = -I$(top_srcdir) -I$(oldincludedir)/tcl obexftp_la_LDFLAGS = -module obexftp_la_LIBADD = $(top_builddir)/obexftp/libobexftp.la \ $(top_builddir)/multicobex/libmulticobex.la \ $(top_builddir)/bfb/libbfb.la \ @OPENOBEX_LIBS@ if ENABLE_SWIG tcl_wrap.c: $(srcdir)/../client.i $(srcdir)/../charmap.i $(SWIG) -tcl -module obexftp -I$(top_srcdir) -o $@ $(srcdir)/../client.i MOSTLYCLEANFILES=tcl_wrap.c endif obexftp-0.23/swig/python/0000777000076600000240000000000011146603263012405 500000000000000obexftp-0.23/swig/python/python_wrap.c0000644000076600000240000037005511146601117015045 00000000000000/* ---------------------------------------------------------------------------- * This file was automatically generated by SWIG (http://www.swig.org). * Version 1.3.33 * * This file is not intended to be easily readable and contains a number of * coding conventions designed to improve portability and efficiency. Do not make * changes to this file unless you know what you are doing--modify the SWIG * interface file instead. * ----------------------------------------------------------------------------- */ #define SWIGPYTHON #define SWIG_PYTHON_DIRECTOR_NO_VTABLE /* ----------------------------------------------------------------------------- * This section contains generic SWIG labels for method/variable * declarations/attributes, and other compiler dependent labels. * ----------------------------------------------------------------------------- */ /* template workaround for compilers that cannot correctly implement the C++ standard */ #ifndef SWIGTEMPLATEDISAMBIGUATOR # if defined(__SUNPRO_CC) && (__SUNPRO_CC <= 0x560) # define SWIGTEMPLATEDISAMBIGUATOR template # elif defined(__HP_aCC) /* Needed even with `aCC -AA' when `aCC -V' reports HP ANSI C++ B3910B A.03.55 */ /* If we find a maximum version that requires this, the test would be __HP_aCC <= 35500 for A.03.55 */ # define SWIGTEMPLATEDISAMBIGUATOR template # else # define SWIGTEMPLATEDISAMBIGUATOR # endif #endif /* inline attribute */ #ifndef SWIGINLINE # if defined(__cplusplus) || (defined(__GNUC__) && !defined(__STRICT_ANSI__)) # define SWIGINLINE inline # else # define SWIGINLINE # endif #endif /* attribute recognised by some compilers to avoid 'unused' warnings */ #ifndef SWIGUNUSED # if defined(__GNUC__) # if !(defined(__cplusplus)) || (__GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 4)) # define SWIGUNUSED __attribute__ ((__unused__)) # else # define SWIGUNUSED # endif # elif defined(__ICC) # define SWIGUNUSED __attribute__ ((__unused__)) # else # define SWIGUNUSED # endif #endif #ifndef SWIGUNUSEDPARM # ifdef __cplusplus # define SWIGUNUSEDPARM(p) # else # define SWIGUNUSEDPARM(p) p SWIGUNUSED # endif #endif /* internal SWIG method */ #ifndef SWIGINTERN # define SWIGINTERN static SWIGUNUSED #endif /* internal inline SWIG method */ #ifndef SWIGINTERNINLINE # define SWIGINTERNINLINE SWIGINTERN SWIGINLINE #endif /* exporting methods */ #if (__GNUC__ >= 4) || (__GNUC__ == 3 && __GNUC_MINOR__ >= 4) # ifndef GCC_HASCLASSVISIBILITY # define GCC_HASCLASSVISIBILITY # endif #endif #ifndef SWIGEXPORT # if defined(_WIN32) || defined(__WIN32__) || defined(__CYGWIN__) # if defined(STATIC_LINKED) # define SWIGEXPORT # else # define SWIGEXPORT __declspec(dllexport) # endif # else # if defined(__GNUC__) && defined(GCC_HASCLASSVISIBILITY) # define SWIGEXPORT __attribute__ ((visibility("default"))) # else # define SWIGEXPORT # endif # endif #endif /* calling conventions for Windows */ #ifndef SWIGSTDCALL # if defined(_WIN32) || defined(__WIN32__) || defined(__CYGWIN__) # define SWIGSTDCALL __stdcall # else # define SWIGSTDCALL # endif #endif /* Deal with Microsoft's attempt at deprecating C standard runtime functions */ #if !defined(SWIG_NO_CRT_SECURE_NO_DEPRECATE) && defined(_MSC_VER) && !defined(_CRT_SECURE_NO_DEPRECATE) # define _CRT_SECURE_NO_DEPRECATE #endif /* Deal with Microsoft's attempt at deprecating methods in the standard C++ library */ #if !defined(SWIG_NO_SCL_SECURE_NO_DEPRECATE) && defined(_MSC_VER) && !defined(_SCL_SECURE_NO_DEPRECATE) # define _SCL_SECURE_NO_DEPRECATE #endif /* Python.h has to appear first */ #include /* ----------------------------------------------------------------------------- * swigrun.swg * * This file contains generic CAPI SWIG runtime support for pointer * type checking. * ----------------------------------------------------------------------------- */ /* This should only be incremented when either the layout of swig_type_info changes, or for whatever reason, the runtime changes incompatibly */ #define SWIG_RUNTIME_VERSION "3" /* define SWIG_TYPE_TABLE_NAME as "SWIG_TYPE_TABLE" */ #ifdef SWIG_TYPE_TABLE # define SWIG_QUOTE_STRING(x) #x # define SWIG_EXPAND_AND_QUOTE_STRING(x) SWIG_QUOTE_STRING(x) # define SWIG_TYPE_TABLE_NAME SWIG_EXPAND_AND_QUOTE_STRING(SWIG_TYPE_TABLE) #else # define SWIG_TYPE_TABLE_NAME #endif /* You can use the SWIGRUNTIME and SWIGRUNTIMEINLINE macros for creating a static or dynamic library from the swig runtime code. In 99.9% of the cases, swig just needs to declare them as 'static'. But only do this if is strictly necessary, ie, if you have problems with your compiler or so. */ #ifndef SWIGRUNTIME # define SWIGRUNTIME SWIGINTERN #endif #ifndef SWIGRUNTIMEINLINE # define SWIGRUNTIMEINLINE SWIGRUNTIME SWIGINLINE #endif /* Generic buffer size */ #ifndef SWIG_BUFFER_SIZE # define SWIG_BUFFER_SIZE 1024 #endif /* Flags for pointer conversions */ #define SWIG_POINTER_DISOWN 0x1 /* Flags for new pointer objects */ #define SWIG_POINTER_OWN 0x1 /* Flags/methods for returning states. The swig conversion methods, as ConvertPtr, return and integer that tells if the conversion was successful or not. And if not, an error code can be returned (see swigerrors.swg for the codes). Use the following macros/flags to set or process the returning states. In old swig versions, you usually write code as: if (SWIG_ConvertPtr(obj,vptr,ty.flags) != -1) { // success code } else { //fail code } Now you can be more explicit as: int res = SWIG_ConvertPtr(obj,vptr,ty.flags); if (SWIG_IsOK(res)) { // success code } else { // fail code } that seems to be the same, but now you can also do Type *ptr; int res = SWIG_ConvertPtr(obj,(void **)(&ptr),ty.flags); if (SWIG_IsOK(res)) { // success code if (SWIG_IsNewObj(res) { ... delete *ptr; } else { ... } } else { // fail code } I.e., now SWIG_ConvertPtr can return new objects and you can identify the case and take care of the deallocation. Of course that requires also to SWIG_ConvertPtr to return new result values, as int SWIG_ConvertPtr(obj, ptr,...) { if () { if () { *ptr = ; return SWIG_NEWOBJ; } else { *ptr = ; return SWIG_OLDOBJ; } } else { return SWIG_BADOBJ; } } Of course, returning the plain '0(success)/-1(fail)' still works, but you can be more explicit by returning SWIG_BADOBJ, SWIG_ERROR or any of the swig errors code. Finally, if the SWIG_CASTRANK_MODE is enabled, the result code allows to return the 'cast rank', for example, if you have this int food(double) int fooi(int); and you call food(1) // cast rank '1' (1 -> 1.0) fooi(1) // cast rank '0' just use the SWIG_AddCast()/SWIG_CheckState() */ #define SWIG_OK (0) #define SWIG_ERROR (-1) #define SWIG_IsOK(r) (r >= 0) #define SWIG_ArgError(r) ((r != SWIG_ERROR) ? r : SWIG_TypeError) /* The CastRankLimit says how many bits are used for the cast rank */ #define SWIG_CASTRANKLIMIT (1 << 8) /* The NewMask denotes the object was created (using new/malloc) */ #define SWIG_NEWOBJMASK (SWIG_CASTRANKLIMIT << 1) /* The TmpMask is for in/out typemaps that use temporal objects */ #define SWIG_TMPOBJMASK (SWIG_NEWOBJMASK << 1) /* Simple returning values */ #define SWIG_BADOBJ (SWIG_ERROR) #define SWIG_OLDOBJ (SWIG_OK) #define SWIG_NEWOBJ (SWIG_OK | SWIG_NEWOBJMASK) #define SWIG_TMPOBJ (SWIG_OK | SWIG_TMPOBJMASK) /* Check, add and del mask methods */ #define SWIG_AddNewMask(r) (SWIG_IsOK(r) ? (r | SWIG_NEWOBJMASK) : r) #define SWIG_DelNewMask(r) (SWIG_IsOK(r) ? (r & ~SWIG_NEWOBJMASK) : r) #define SWIG_IsNewObj(r) (SWIG_IsOK(r) && (r & SWIG_NEWOBJMASK)) #define SWIG_AddTmpMask(r) (SWIG_IsOK(r) ? (r | SWIG_TMPOBJMASK) : r) #define SWIG_DelTmpMask(r) (SWIG_IsOK(r) ? (r & ~SWIG_TMPOBJMASK) : r) #define SWIG_IsTmpObj(r) (SWIG_IsOK(r) && (r & SWIG_TMPOBJMASK)) /* Cast-Rank Mode */ #if defined(SWIG_CASTRANK_MODE) # ifndef SWIG_TypeRank # define SWIG_TypeRank unsigned long # endif # ifndef SWIG_MAXCASTRANK /* Default cast allowed */ # define SWIG_MAXCASTRANK (2) # endif # define SWIG_CASTRANKMASK ((SWIG_CASTRANKLIMIT) -1) # define SWIG_CastRank(r) (r & SWIG_CASTRANKMASK) SWIGINTERNINLINE int SWIG_AddCast(int r) { return SWIG_IsOK(r) ? ((SWIG_CastRank(r) < SWIG_MAXCASTRANK) ? (r + 1) : SWIG_ERROR) : r; } SWIGINTERNINLINE int SWIG_CheckState(int r) { return SWIG_IsOK(r) ? SWIG_CastRank(r) + 1 : 0; } #else /* no cast-rank mode */ # define SWIG_AddCast # define SWIG_CheckState(r) (SWIG_IsOK(r) ? 1 : 0) #endif #include #ifdef __cplusplus extern "C" { #endif typedef void *(*swig_converter_func)(void *); typedef struct swig_type_info *(*swig_dycast_func)(void **); /* Structure to store inforomation on one type */ typedef struct swig_type_info { const char *name; /* mangled name of this type */ const char *str; /* human readable name of this type */ swig_dycast_func dcast; /* dynamic cast function down a hierarchy */ struct swig_cast_info *cast; /* linked list of types that can cast into this type */ void *clientdata; /* language specific type data */ int owndata; /* flag if the structure owns the clientdata */ } swig_type_info; /* Structure to store a type and conversion function used for casting */ typedef struct swig_cast_info { swig_type_info *type; /* pointer to type that is equivalent to this type */ swig_converter_func converter; /* function to cast the void pointers */ struct swig_cast_info *next; /* pointer to next cast in linked list */ struct swig_cast_info *prev; /* pointer to the previous cast */ } swig_cast_info; /* Structure used to store module information * Each module generates one structure like this, and the runtime collects * all of these structures and stores them in a circularly linked list.*/ typedef struct swig_module_info { swig_type_info **types; /* Array of pointers to swig_type_info structures that are in this module */ size_t size; /* Number of types in this module */ struct swig_module_info *next; /* Pointer to next element in circularly linked list */ swig_type_info **type_initial; /* Array of initially generated type structures */ swig_cast_info **cast_initial; /* Array of initially generated casting structures */ void *clientdata; /* Language specific module data */ } swig_module_info; /* Compare two type names skipping the space characters, therefore "char*" == "char *" and "Class" == "Class", etc. Return 0 when the two name types are equivalent, as in strncmp, but skipping ' '. */ SWIGRUNTIME int SWIG_TypeNameComp(const char *f1, const char *l1, const char *f2, const char *l2) { for (;(f1 != l1) && (f2 != l2); ++f1, ++f2) { while ((*f1 == ' ') && (f1 != l1)) ++f1; while ((*f2 == ' ') && (f2 != l2)) ++f2; if (*f1 != *f2) return (*f1 > *f2) ? 1 : -1; } return (int)((l1 - f1) - (l2 - f2)); } /* Check type equivalence in a name list like ||... Return 0 if not equal, 1 if equal */ SWIGRUNTIME int SWIG_TypeEquiv(const char *nb, const char *tb) { int equiv = 0; const char* te = tb + strlen(tb); const char* ne = nb; while (!equiv && *ne) { for (nb = ne; *ne; ++ne) { if (*ne == '|') break; } equiv = (SWIG_TypeNameComp(nb, ne, tb, te) == 0) ? 1 : 0; if (*ne) ++ne; } return equiv; } /* Check type equivalence in a name list like ||... Return 0 if equal, -1 if nb < tb, 1 if nb > tb */ SWIGRUNTIME int SWIG_TypeCompare(const char *nb, const char *tb) { int equiv = 0; const char* te = tb + strlen(tb); const char* ne = nb; while (!equiv && *ne) { for (nb = ne; *ne; ++ne) { if (*ne == '|') break; } equiv = (SWIG_TypeNameComp(nb, ne, tb, te) == 0) ? 1 : 0; if (*ne) ++ne; } return equiv; } /* think of this as a c++ template<> or a scheme macro */ #define SWIG_TypeCheck_Template(comparison, ty) \ if (ty) { \ swig_cast_info *iter = ty->cast; \ while (iter) { \ if (comparison) { \ if (iter == ty->cast) return iter; \ /* Move iter to the top of the linked list */ \ iter->prev->next = iter->next; \ if (iter->next) \ iter->next->prev = iter->prev; \ iter->next = ty->cast; \ iter->prev = 0; \ if (ty->cast) ty->cast->prev = iter; \ ty->cast = iter; \ return iter; \ } \ iter = iter->next; \ } \ } \ return 0 /* Check the typename */ SWIGRUNTIME swig_cast_info * SWIG_TypeCheck(const char *c, swig_type_info *ty) { SWIG_TypeCheck_Template(strcmp(iter->type->name, c) == 0, ty); } /* Same as previous function, except strcmp is replaced with a pointer comparison */ SWIGRUNTIME swig_cast_info * SWIG_TypeCheckStruct(swig_type_info *from, swig_type_info *into) { SWIG_TypeCheck_Template(iter->type == from, into); } /* Cast a pointer up an inheritance hierarchy */ SWIGRUNTIMEINLINE void * SWIG_TypeCast(swig_cast_info *ty, void *ptr) { return ((!ty) || (!ty->converter)) ? ptr : (*ty->converter)(ptr); } /* Dynamic pointer casting. Down an inheritance hierarchy */ SWIGRUNTIME swig_type_info * SWIG_TypeDynamicCast(swig_type_info *ty, void **ptr) { swig_type_info *lastty = ty; if (!ty || !ty->dcast) return ty; while (ty && (ty->dcast)) { ty = (*ty->dcast)(ptr); if (ty) lastty = ty; } return lastty; } /* Return the name associated with this type */ SWIGRUNTIMEINLINE const char * SWIG_TypeName(const swig_type_info *ty) { return ty->name; } /* Return the pretty name associated with this type, that is an unmangled type name in a form presentable to the user. */ SWIGRUNTIME const char * SWIG_TypePrettyName(const swig_type_info *type) { /* The "str" field contains the equivalent pretty names of the type, separated by vertical-bar characters. We choose to print the last name, as it is often (?) the most specific. */ if (!type) return NULL; if (type->str != NULL) { const char *last_name = type->str; const char *s; for (s = type->str; *s; s++) if (*s == '|') last_name = s+1; return last_name; } else return type->name; } /* Set the clientdata field for a type */ SWIGRUNTIME void SWIG_TypeClientData(swig_type_info *ti, void *clientdata) { swig_cast_info *cast = ti->cast; /* if (ti->clientdata == clientdata) return; */ ti->clientdata = clientdata; while (cast) { if (!cast->converter) { swig_type_info *tc = cast->type; if (!tc->clientdata) { SWIG_TypeClientData(tc, clientdata); } } cast = cast->next; } } SWIGRUNTIME void SWIG_TypeNewClientData(swig_type_info *ti, void *clientdata) { SWIG_TypeClientData(ti, clientdata); ti->owndata = 1; } /* Search for a swig_type_info structure only by mangled name Search is a O(log #types) We start searching at module start, and finish searching when start == end. Note: if start == end at the beginning of the function, we go all the way around the circular list. */ SWIGRUNTIME swig_type_info * SWIG_MangledTypeQueryModule(swig_module_info *start, swig_module_info *end, const char *name) { swig_module_info *iter = start; do { if (iter->size) { register size_t l = 0; register size_t r = iter->size - 1; do { /* since l+r >= 0, we can (>> 1) instead (/ 2) */ register size_t i = (l + r) >> 1; const char *iname = iter->types[i]->name; if (iname) { register int compare = strcmp(name, iname); if (compare == 0) { return iter->types[i]; } else if (compare < 0) { if (i) { r = i - 1; } else { break; } } else if (compare > 0) { l = i + 1; } } else { break; /* should never happen */ } } while (l <= r); } iter = iter->next; } while (iter != end); return 0; } /* Search for a swig_type_info structure for either a mangled name or a human readable name. It first searches the mangled names of the types, which is a O(log #types) If a type is not found it then searches the human readable names, which is O(#types). We start searching at module start, and finish searching when start == end. Note: if start == end at the beginning of the function, we go all the way around the circular list. */ SWIGRUNTIME swig_type_info * SWIG_TypeQueryModule(swig_module_info *start, swig_module_info *end, const char *name) { /* STEP 1: Search the name field using binary search */ swig_type_info *ret = SWIG_MangledTypeQueryModule(start, end, name); if (ret) { return ret; } else { /* STEP 2: If the type hasn't been found, do a complete search of the str field (the human readable name) */ swig_module_info *iter = start; do { register size_t i = 0; for (; i < iter->size; ++i) { if (iter->types[i]->str && (SWIG_TypeEquiv(iter->types[i]->str, name))) return iter->types[i]; } iter = iter->next; } while (iter != end); } /* neither found a match */ return 0; } /* Pack binary data into a string */ SWIGRUNTIME char * SWIG_PackData(char *c, void *ptr, size_t sz) { static const char hex[17] = "0123456789abcdef"; register const unsigned char *u = (unsigned char *) ptr; register const unsigned char *eu = u + sz; for (; u != eu; ++u) { register unsigned char uu = *u; *(c++) = hex[(uu & 0xf0) >> 4]; *(c++) = hex[uu & 0xf]; } return c; } /* Unpack binary data from a string */ SWIGRUNTIME const char * SWIG_UnpackData(const char *c, void *ptr, size_t sz) { register unsigned char *u = (unsigned char *) ptr; register const unsigned char *eu = u + sz; for (; u != eu; ++u) { register char d = *(c++); register unsigned char uu; if ((d >= '0') && (d <= '9')) uu = ((d - '0') << 4); else if ((d >= 'a') && (d <= 'f')) uu = ((d - ('a'-10)) << 4); else return (char *) 0; d = *(c++); if ((d >= '0') && (d <= '9')) uu |= (d - '0'); else if ((d >= 'a') && (d <= 'f')) uu |= (d - ('a'-10)); else return (char *) 0; *u = uu; } return c; } /* Pack 'void *' into a string buffer. */ SWIGRUNTIME char * SWIG_PackVoidPtr(char *buff, void *ptr, const char *name, size_t bsz) { char *r = buff; if ((2*sizeof(void *) + 2) > bsz) return 0; *(r++) = '_'; r = SWIG_PackData(r,&ptr,sizeof(void *)); if (strlen(name) + 1 > (bsz - (r - buff))) return 0; strcpy(r,name); return buff; } SWIGRUNTIME const char * SWIG_UnpackVoidPtr(const char *c, void **ptr, const char *name) { if (*c != '_') { if (strcmp(c,"NULL") == 0) { *ptr = (void *) 0; return name; } else { return 0; } } return SWIG_UnpackData(++c,ptr,sizeof(void *)); } SWIGRUNTIME char * SWIG_PackDataName(char *buff, void *ptr, size_t sz, const char *name, size_t bsz) { char *r = buff; size_t lname = (name ? strlen(name) : 0); if ((2*sz + 2 + lname) > bsz) return 0; *(r++) = '_'; r = SWIG_PackData(r,ptr,sz); if (lname) { strncpy(r,name,lname+1); } else { *r = 0; } return buff; } SWIGRUNTIME const char * SWIG_UnpackDataName(const char *c, void *ptr, size_t sz, const char *name) { if (*c != '_') { if (strcmp(c,"NULL") == 0) { memset(ptr,0,sz); return name; } else { return 0; } } return SWIG_UnpackData(++c,ptr,sz); } #ifdef __cplusplus } #endif /* Errors in SWIG */ #define SWIG_UnknownError -1 #define SWIG_IOError -2 #define SWIG_RuntimeError -3 #define SWIG_IndexError -4 #define SWIG_TypeError -5 #define SWIG_DivisionByZero -6 #define SWIG_OverflowError -7 #define SWIG_SyntaxError -8 #define SWIG_ValueError -9 #define SWIG_SystemError -10 #define SWIG_AttributeError -11 #define SWIG_MemoryError -12 #define SWIG_NullReferenceError -13 /* Add PyOS_snprintf for old Pythons */ #if PY_VERSION_HEX < 0x02020000 # if defined(_MSC_VER) || defined(__BORLANDC__) || defined(_WATCOM) # define PyOS_snprintf _snprintf # else # define PyOS_snprintf snprintf # endif #endif /* A crude PyString_FromFormat implementation for old Pythons */ #if PY_VERSION_HEX < 0x02020000 #ifndef SWIG_PYBUFFER_SIZE # define SWIG_PYBUFFER_SIZE 1024 #endif static PyObject * PyString_FromFormat(const char *fmt, ...) { va_list ap; char buf[SWIG_PYBUFFER_SIZE * 2]; int res; va_start(ap, fmt); res = vsnprintf(buf, sizeof(buf), fmt, ap); va_end(ap); return (res < 0 || res >= (int)sizeof(buf)) ? 0 : PyString_FromString(buf); } #endif /* Add PyObject_Del for old Pythons */ #if PY_VERSION_HEX < 0x01060000 # define PyObject_Del(op) PyMem_DEL((op)) #endif #ifndef PyObject_DEL # define PyObject_DEL PyObject_Del #endif /* A crude PyExc_StopIteration exception for old Pythons */ #if PY_VERSION_HEX < 0x02020000 # ifndef PyExc_StopIteration # define PyExc_StopIteration PyExc_RuntimeError # endif # ifndef PyObject_GenericGetAttr # define PyObject_GenericGetAttr 0 # endif #endif /* Py_NotImplemented is defined in 2.1 and up. */ #if PY_VERSION_HEX < 0x02010000 # ifndef Py_NotImplemented # define Py_NotImplemented PyExc_RuntimeError # endif #endif /* A crude PyString_AsStringAndSize implementation for old Pythons */ #if PY_VERSION_HEX < 0x02010000 # ifndef PyString_AsStringAndSize # define PyString_AsStringAndSize(obj, s, len) {*s = PyString_AsString(obj); *len = *s ? strlen(*s) : 0;} # endif #endif /* PySequence_Size for old Pythons */ #if PY_VERSION_HEX < 0x02000000 # ifndef PySequence_Size # define PySequence_Size PySequence_Length # endif #endif /* PyBool_FromLong for old Pythons */ #if PY_VERSION_HEX < 0x02030000 static PyObject *PyBool_FromLong(long ok) { PyObject *result = ok ? Py_True : Py_False; Py_INCREF(result); return result; } #endif /* Py_ssize_t for old Pythons */ /* This code is as recommended by: */ /* http://www.python.org/dev/peps/pep-0353/#conversion-guidelines */ #if PY_VERSION_HEX < 0x02050000 && !defined(PY_SSIZE_T_MIN) typedef int Py_ssize_t; # define PY_SSIZE_T_MAX INT_MAX # define PY_SSIZE_T_MIN INT_MIN #endif /* ----------------------------------------------------------------------------- * error manipulation * ----------------------------------------------------------------------------- */ SWIGRUNTIME PyObject* SWIG_Python_ErrorType(int code) { PyObject* type = 0; switch(code) { case SWIG_MemoryError: type = PyExc_MemoryError; break; case SWIG_IOError: type = PyExc_IOError; break; case SWIG_RuntimeError: type = PyExc_RuntimeError; break; case SWIG_IndexError: type = PyExc_IndexError; break; case SWIG_TypeError: type = PyExc_TypeError; break; case SWIG_DivisionByZero: type = PyExc_ZeroDivisionError; break; case SWIG_OverflowError: type = PyExc_OverflowError; break; case SWIG_SyntaxError: type = PyExc_SyntaxError; break; case SWIG_ValueError: type = PyExc_ValueError; break; case SWIG_SystemError: type = PyExc_SystemError; break; case SWIG_AttributeError: type = PyExc_AttributeError; break; default: type = PyExc_RuntimeError; } return type; } SWIGRUNTIME void SWIG_Python_AddErrorMsg(const char* mesg) { PyObject *type = 0; PyObject *value = 0; PyObject *traceback = 0; if (PyErr_Occurred()) PyErr_Fetch(&type, &value, &traceback); if (value) { PyObject *old_str = PyObject_Str(value); PyErr_Clear(); Py_XINCREF(type); PyErr_Format(type, "%s %s", PyString_AsString(old_str), mesg); Py_DECREF(old_str); Py_DECREF(value); } else { PyErr_Format(PyExc_RuntimeError, mesg); } } #if defined(SWIG_PYTHON_NO_THREADS) # if defined(SWIG_PYTHON_THREADS) # undef SWIG_PYTHON_THREADS # endif #endif #if defined(SWIG_PYTHON_THREADS) /* Threading support is enabled */ # if !defined(SWIG_PYTHON_USE_GIL) && !defined(SWIG_PYTHON_NO_USE_GIL) # if (PY_VERSION_HEX >= 0x02030000) /* For 2.3 or later, use the PyGILState calls */ # define SWIG_PYTHON_USE_GIL # endif # endif # if defined(SWIG_PYTHON_USE_GIL) /* Use PyGILState threads calls */ # ifndef SWIG_PYTHON_INITIALIZE_THREADS # define SWIG_PYTHON_INITIALIZE_THREADS PyEval_InitThreads() # endif # ifdef __cplusplus /* C++ code */ class SWIG_Python_Thread_Block { bool status; PyGILState_STATE state; public: void end() { if (status) { PyGILState_Release(state); status = false;} } SWIG_Python_Thread_Block() : status(true), state(PyGILState_Ensure()) {} ~SWIG_Python_Thread_Block() { end(); } }; class SWIG_Python_Thread_Allow { bool status; PyThreadState *save; public: void end() { if (status) { PyEval_RestoreThread(save); status = false; }} SWIG_Python_Thread_Allow() : status(true), save(PyEval_SaveThread()) {} ~SWIG_Python_Thread_Allow() { end(); } }; # define SWIG_PYTHON_THREAD_BEGIN_BLOCK SWIG_Python_Thread_Block _swig_thread_block # define SWIG_PYTHON_THREAD_END_BLOCK _swig_thread_block.end() # define SWIG_PYTHON_THREAD_BEGIN_ALLOW SWIG_Python_Thread_Allow _swig_thread_allow # define SWIG_PYTHON_THREAD_END_ALLOW _swig_thread_allow.end() # else /* C code */ # define SWIG_PYTHON_THREAD_BEGIN_BLOCK PyGILState_STATE _swig_thread_block = PyGILState_Ensure() # define SWIG_PYTHON_THREAD_END_BLOCK PyGILState_Release(_swig_thread_block) # define SWIG_PYTHON_THREAD_BEGIN_ALLOW PyThreadState *_swig_thread_allow = PyEval_SaveThread() # define SWIG_PYTHON_THREAD_END_ALLOW PyEval_RestoreThread(_swig_thread_allow) # endif # else /* Old thread way, not implemented, user must provide it */ # if !defined(SWIG_PYTHON_INITIALIZE_THREADS) # define SWIG_PYTHON_INITIALIZE_THREADS # endif # if !defined(SWIG_PYTHON_THREAD_BEGIN_BLOCK) # define SWIG_PYTHON_THREAD_BEGIN_BLOCK # endif # if !defined(SWIG_PYTHON_THREAD_END_BLOCK) # define SWIG_PYTHON_THREAD_END_BLOCK # endif # if !defined(SWIG_PYTHON_THREAD_BEGIN_ALLOW) # define SWIG_PYTHON_THREAD_BEGIN_ALLOW # endif # if !defined(SWIG_PYTHON_THREAD_END_ALLOW) # define SWIG_PYTHON_THREAD_END_ALLOW # endif # endif #else /* No thread support */ # define SWIG_PYTHON_INITIALIZE_THREADS # define SWIG_PYTHON_THREAD_BEGIN_BLOCK # define SWIG_PYTHON_THREAD_END_BLOCK # define SWIG_PYTHON_THREAD_BEGIN_ALLOW # define SWIG_PYTHON_THREAD_END_ALLOW #endif /* ----------------------------------------------------------------------------- * Python API portion that goes into the runtime * ----------------------------------------------------------------------------- */ #ifdef __cplusplus extern "C" { #if 0 } /* cc-mode */ #endif #endif /* ----------------------------------------------------------------------------- * Constant declarations * ----------------------------------------------------------------------------- */ /* Constant Types */ #define SWIG_PY_POINTER 4 #define SWIG_PY_BINARY 5 /* Constant information structure */ typedef struct swig_const_info { int type; char *name; long lvalue; double dvalue; void *pvalue; swig_type_info **ptype; } swig_const_info; #ifdef __cplusplus #if 0 { /* cc-mode */ #endif } #endif /* ----------------------------------------------------------------------------- * See the LICENSE file for information on copyright, usage and redistribution * of SWIG, and the README file for authors - http://www.swig.org/release.html. * * pyrun.swg * * This file contains the runtime support for Python modules * and includes code for managing global variables and pointer * type checking. * * ----------------------------------------------------------------------------- */ /* Common SWIG API */ /* for raw pointers */ #define SWIG_Python_ConvertPtr(obj, pptr, type, flags) SWIG_Python_ConvertPtrAndOwn(obj, pptr, type, flags, 0) #define SWIG_ConvertPtr(obj, pptr, type, flags) SWIG_Python_ConvertPtr(obj, pptr, type, flags) #define SWIG_ConvertPtrAndOwn(obj,pptr,type,flags,own) SWIG_Python_ConvertPtrAndOwn(obj, pptr, type, flags, own) #define SWIG_NewPointerObj(ptr, type, flags) SWIG_Python_NewPointerObj(ptr, type, flags) #define SWIG_CheckImplicit(ty) SWIG_Python_CheckImplicit(ty) #define SWIG_AcquirePtr(ptr, src) SWIG_Python_AcquirePtr(ptr, src) #define swig_owntype int /* for raw packed data */ #define SWIG_ConvertPacked(obj, ptr, sz, ty) SWIG_Python_ConvertPacked(obj, ptr, sz, ty) #define SWIG_NewPackedObj(ptr, sz, type) SWIG_Python_NewPackedObj(ptr, sz, type) /* for class or struct pointers */ #define SWIG_ConvertInstance(obj, pptr, type, flags) SWIG_ConvertPtr(obj, pptr, type, flags) #define SWIG_NewInstanceObj(ptr, type, flags) SWIG_NewPointerObj(ptr, type, flags) /* for C or C++ function pointers */ #define SWIG_ConvertFunctionPtr(obj, pptr, type) SWIG_Python_ConvertFunctionPtr(obj, pptr, type) #define SWIG_NewFunctionPtrObj(ptr, type) SWIG_Python_NewPointerObj(ptr, type, 0) /* for C++ member pointers, ie, member methods */ #define SWIG_ConvertMember(obj, ptr, sz, ty) SWIG_Python_ConvertPacked(obj, ptr, sz, ty) #define SWIG_NewMemberObj(ptr, sz, type) SWIG_Python_NewPackedObj(ptr, sz, type) /* Runtime API */ #define SWIG_GetModule(clientdata) SWIG_Python_GetModule() #define SWIG_SetModule(clientdata, pointer) SWIG_Python_SetModule(pointer) #define SWIG_NewClientData(obj) PySwigClientData_New(obj) #define SWIG_SetErrorObj SWIG_Python_SetErrorObj #define SWIG_SetErrorMsg SWIG_Python_SetErrorMsg #define SWIG_ErrorType(code) SWIG_Python_ErrorType(code) #define SWIG_Error(code, msg) SWIG_Python_SetErrorMsg(SWIG_ErrorType(code), msg) #define SWIG_fail goto fail /* Runtime API implementation */ /* Error manipulation */ SWIGINTERN void SWIG_Python_SetErrorObj(PyObject *errtype, PyObject *obj) { SWIG_PYTHON_THREAD_BEGIN_BLOCK; PyErr_SetObject(errtype, obj); Py_DECREF(obj); SWIG_PYTHON_THREAD_END_BLOCK; } SWIGINTERN void SWIG_Python_SetErrorMsg(PyObject *errtype, const char *msg) { SWIG_PYTHON_THREAD_BEGIN_BLOCK; PyErr_SetString(errtype, (char *) msg); SWIG_PYTHON_THREAD_END_BLOCK; } #define SWIG_Python_Raise(obj, type, desc) SWIG_Python_SetErrorObj(SWIG_Python_ExceptionType(desc), obj) /* Set a constant value */ SWIGINTERN void SWIG_Python_SetConstant(PyObject *d, const char *name, PyObject *obj) { PyDict_SetItemString(d, (char*) name, obj); Py_DECREF(obj); } /* Append a value to the result obj */ SWIGINTERN PyObject* SWIG_Python_AppendOutput(PyObject* result, PyObject* obj) { #if !defined(SWIG_PYTHON_OUTPUT_TUPLE) if (!result) { result = obj; } else if (result == Py_None) { Py_DECREF(result); result = obj; } else { if (!PyList_Check(result)) { PyObject *o2 = result; result = PyList_New(1); PyList_SetItem(result, 0, o2); } PyList_Append(result,obj); Py_DECREF(obj); } return result; #else PyObject* o2; PyObject* o3; if (!result) { result = obj; } else if (result == Py_None) { Py_DECREF(result); result = obj; } else { if (!PyTuple_Check(result)) { o2 = result; result = PyTuple_New(1); PyTuple_SET_ITEM(result, 0, o2); } o3 = PyTuple_New(1); PyTuple_SET_ITEM(o3, 0, obj); o2 = result; result = PySequence_Concat(o2, o3); Py_DECREF(o2); Py_DECREF(o3); } return result; #endif } /* Unpack the argument tuple */ SWIGINTERN int SWIG_Python_UnpackTuple(PyObject *args, const char *name, Py_ssize_t min, Py_ssize_t max, PyObject **objs) { if (!args) { if (!min && !max) { return 1; } else { PyErr_Format(PyExc_TypeError, "%s expected %s%d arguments, got none", name, (min == max ? "" : "at least "), (int)min); return 0; } } if (!PyTuple_Check(args)) { PyErr_SetString(PyExc_SystemError, "UnpackTuple() argument list is not a tuple"); return 0; } else { register Py_ssize_t l = PyTuple_GET_SIZE(args); if (l < min) { PyErr_Format(PyExc_TypeError, "%s expected %s%d arguments, got %d", name, (min == max ? "" : "at least "), (int)min, (int)l); return 0; } else if (l > max) { PyErr_Format(PyExc_TypeError, "%s expected %s%d arguments, got %d", name, (min == max ? "" : "at most "), (int)max, (int)l); return 0; } else { register int i; for (i = 0; i < l; ++i) { objs[i] = PyTuple_GET_ITEM(args, i); } for (; l < max; ++l) { objs[l] = 0; } return i + 1; } } } /* A functor is a function object with one single object argument */ #if PY_VERSION_HEX >= 0x02020000 #define SWIG_Python_CallFunctor(functor, obj) PyObject_CallFunctionObjArgs(functor, obj, NULL); #else #define SWIG_Python_CallFunctor(functor, obj) PyObject_CallFunction(functor, "O", obj); #endif /* Helper for static pointer initialization for both C and C++ code, for example static PyObject *SWIG_STATIC_POINTER(MyVar) = NewSomething(...); */ #ifdef __cplusplus #define SWIG_STATIC_POINTER(var) var #else #define SWIG_STATIC_POINTER(var) var = 0; if (!var) var #endif /* ----------------------------------------------------------------------------- * Pointer declarations * ----------------------------------------------------------------------------- */ /* Flags for new pointer objects */ #define SWIG_POINTER_NOSHADOW (SWIG_POINTER_OWN << 1) #define SWIG_POINTER_NEW (SWIG_POINTER_NOSHADOW | SWIG_POINTER_OWN) #define SWIG_POINTER_IMPLICIT_CONV (SWIG_POINTER_DISOWN << 1) #ifdef __cplusplus extern "C" { #if 0 } /* cc-mode */ #endif #endif /* How to access Py_None */ #if defined(_WIN32) || defined(__WIN32__) || defined(__CYGWIN__) # ifndef SWIG_PYTHON_NO_BUILD_NONE # ifndef SWIG_PYTHON_BUILD_NONE # define SWIG_PYTHON_BUILD_NONE # endif # endif #endif #ifdef SWIG_PYTHON_BUILD_NONE # ifdef Py_None # undef Py_None # define Py_None SWIG_Py_None() # endif SWIGRUNTIMEINLINE PyObject * _SWIG_Py_None(void) { PyObject *none = Py_BuildValue((char*)""); Py_DECREF(none); return none; } SWIGRUNTIME PyObject * SWIG_Py_None(void) { static PyObject *SWIG_STATIC_POINTER(none) = _SWIG_Py_None(); return none; } #endif /* The python void return value */ SWIGRUNTIMEINLINE PyObject * SWIG_Py_Void(void) { PyObject *none = Py_None; Py_INCREF(none); return none; } /* PySwigClientData */ typedef struct { PyObject *klass; PyObject *newraw; PyObject *newargs; PyObject *destroy; int delargs; int implicitconv; } PySwigClientData; SWIGRUNTIMEINLINE int SWIG_Python_CheckImplicit(swig_type_info *ty) { PySwigClientData *data = (PySwigClientData *)ty->clientdata; return data ? data->implicitconv : 0; } SWIGRUNTIMEINLINE PyObject * SWIG_Python_ExceptionType(swig_type_info *desc) { PySwigClientData *data = desc ? (PySwigClientData *) desc->clientdata : 0; PyObject *klass = data ? data->klass : 0; return (klass ? klass : PyExc_RuntimeError); } SWIGRUNTIME PySwigClientData * PySwigClientData_New(PyObject* obj) { if (!obj) { return 0; } else { PySwigClientData *data = (PySwigClientData *)malloc(sizeof(PySwigClientData)); /* the klass element */ data->klass = obj; Py_INCREF(data->klass); /* the newraw method and newargs arguments used to create a new raw instance */ if (PyClass_Check(obj)) { data->newraw = 0; data->newargs = obj; Py_INCREF(obj); } else { #if (PY_VERSION_HEX < 0x02020000) data->newraw = 0; #else data->newraw = PyObject_GetAttrString(data->klass, (char *)"__new__"); #endif if (data->newraw) { Py_INCREF(data->newraw); data->newargs = PyTuple_New(1); PyTuple_SetItem(data->newargs, 0, obj); } else { data->newargs = obj; } Py_INCREF(data->newargs); } /* the destroy method, aka as the C++ delete method */ data->destroy = PyObject_GetAttrString(data->klass, (char *)"__swig_destroy__"); if (PyErr_Occurred()) { PyErr_Clear(); data->destroy = 0; } if (data->destroy) { int flags; Py_INCREF(data->destroy); flags = PyCFunction_GET_FLAGS(data->destroy); #ifdef METH_O data->delargs = !(flags & (METH_O)); #else data->delargs = 0; #endif } else { data->delargs = 0; } data->implicitconv = 0; return data; } } SWIGRUNTIME void PySwigClientData_Del(PySwigClientData* data) { Py_XDECREF(data->newraw); Py_XDECREF(data->newargs); Py_XDECREF(data->destroy); } /* =============== PySwigObject =====================*/ typedef struct { PyObject_HEAD void *ptr; swig_type_info *ty; int own; PyObject *next; } PySwigObject; SWIGRUNTIME PyObject * PySwigObject_long(PySwigObject *v) { return PyLong_FromVoidPtr(v->ptr); } SWIGRUNTIME PyObject * PySwigObject_format(const char* fmt, PySwigObject *v) { PyObject *res = NULL; PyObject *args = PyTuple_New(1); if (args) { if (PyTuple_SetItem(args, 0, PySwigObject_long(v)) == 0) { PyObject *ofmt = PyString_FromString(fmt); if (ofmt) { res = PyString_Format(ofmt,args); Py_DECREF(ofmt); } Py_DECREF(args); } } return res; } SWIGRUNTIME PyObject * PySwigObject_oct(PySwigObject *v) { return PySwigObject_format("%o",v); } SWIGRUNTIME PyObject * PySwigObject_hex(PySwigObject *v) { return PySwigObject_format("%x",v); } SWIGRUNTIME PyObject * #ifdef METH_NOARGS PySwigObject_repr(PySwigObject *v) #else PySwigObject_repr(PySwigObject *v, PyObject *args) #endif { const char *name = SWIG_TypePrettyName(v->ty); PyObject *hex = PySwigObject_hex(v); PyObject *repr = PyString_FromFormat("", name, PyString_AsString(hex)); Py_DECREF(hex); if (v->next) { #ifdef METH_NOARGS PyObject *nrep = PySwigObject_repr((PySwigObject *)v->next); #else PyObject *nrep = PySwigObject_repr((PySwigObject *)v->next, args); #endif PyString_ConcatAndDel(&repr,nrep); } return repr; } SWIGRUNTIME int PySwigObject_print(PySwigObject *v, FILE *fp, int SWIGUNUSEDPARM(flags)) { #ifdef METH_NOARGS PyObject *repr = PySwigObject_repr(v); #else PyObject *repr = PySwigObject_repr(v, NULL); #endif if (repr) { fputs(PyString_AsString(repr), fp); Py_DECREF(repr); return 0; } else { return 1; } } SWIGRUNTIME PyObject * PySwigObject_str(PySwigObject *v) { char result[SWIG_BUFFER_SIZE]; return SWIG_PackVoidPtr(result, v->ptr, v->ty->name, sizeof(result)) ? PyString_FromString(result) : 0; } SWIGRUNTIME int PySwigObject_compare(PySwigObject *v, PySwigObject *w) { void *i = v->ptr; void *j = w->ptr; return (i < j) ? -1 : ((i > j) ? 1 : 0); } SWIGRUNTIME PyTypeObject* _PySwigObject_type(void); SWIGRUNTIME PyTypeObject* PySwigObject_type(void) { static PyTypeObject *SWIG_STATIC_POINTER(type) = _PySwigObject_type(); return type; } SWIGRUNTIMEINLINE int PySwigObject_Check(PyObject *op) { return ((op)->ob_type == PySwigObject_type()) || (strcmp((op)->ob_type->tp_name,"PySwigObject") == 0); } SWIGRUNTIME PyObject * PySwigObject_New(void *ptr, swig_type_info *ty, int own); SWIGRUNTIME void PySwigObject_dealloc(PyObject *v) { PySwigObject *sobj = (PySwigObject *) v; PyObject *next = sobj->next; if (sobj->own) { swig_type_info *ty = sobj->ty; PySwigClientData *data = ty ? (PySwigClientData *) ty->clientdata : 0; PyObject *destroy = data ? data->destroy : 0; if (destroy) { /* destroy is always a VARARGS method */ PyObject *res; if (data->delargs) { /* we need to create a temporal object to carry the destroy operation */ PyObject *tmp = PySwigObject_New(sobj->ptr, ty, 0); res = SWIG_Python_CallFunctor(destroy, tmp); Py_DECREF(tmp); } else { PyCFunction meth = PyCFunction_GET_FUNCTION(destroy); PyObject *mself = PyCFunction_GET_SELF(destroy); res = ((*meth)(mself, v)); } Py_XDECREF(res); } else { const char *name = SWIG_TypePrettyName(ty); #if !defined(SWIG_PYTHON_SILENT_MEMLEAK) printf("swig/python detected a memory leak of type '%s', no destructor found.\n", name); #endif } } Py_XDECREF(next); PyObject_DEL(v); } SWIGRUNTIME PyObject* PySwigObject_append(PyObject* v, PyObject* next) { PySwigObject *sobj = (PySwigObject *) v; #ifndef METH_O PyObject *tmp = 0; if (!PyArg_ParseTuple(next,(char *)"O:append", &tmp)) return NULL; next = tmp; #endif if (!PySwigObject_Check(next)) { return NULL; } sobj->next = next; Py_INCREF(next); return SWIG_Py_Void(); } SWIGRUNTIME PyObject* #ifdef METH_NOARGS PySwigObject_next(PyObject* v) #else PySwigObject_next(PyObject* v, PyObject *SWIGUNUSEDPARM(args)) #endif { PySwigObject *sobj = (PySwigObject *) v; if (sobj->next) { Py_INCREF(sobj->next); return sobj->next; } else { return SWIG_Py_Void(); } } SWIGINTERN PyObject* #ifdef METH_NOARGS PySwigObject_disown(PyObject *v) #else PySwigObject_disown(PyObject* v, PyObject *SWIGUNUSEDPARM(args)) #endif { PySwigObject *sobj = (PySwigObject *)v; sobj->own = 0; return SWIG_Py_Void(); } SWIGINTERN PyObject* #ifdef METH_NOARGS PySwigObject_acquire(PyObject *v) #else PySwigObject_acquire(PyObject* v, PyObject *SWIGUNUSEDPARM(args)) #endif { PySwigObject *sobj = (PySwigObject *)v; sobj->own = SWIG_POINTER_OWN; return SWIG_Py_Void(); } SWIGINTERN PyObject* PySwigObject_own(PyObject *v, PyObject *args) { PyObject *val = 0; #if (PY_VERSION_HEX < 0x02020000) if (!PyArg_ParseTuple(args,(char *)"|O:own",&val)) #else if (!PyArg_UnpackTuple(args, (char *)"own", 0, 1, &val)) #endif { return NULL; } else { PySwigObject *sobj = (PySwigObject *)v; PyObject *obj = PyBool_FromLong(sobj->own); if (val) { #ifdef METH_NOARGS if (PyObject_IsTrue(val)) { PySwigObject_acquire(v); } else { PySwigObject_disown(v); } #else if (PyObject_IsTrue(val)) { PySwigObject_acquire(v,args); } else { PySwigObject_disown(v,args); } #endif } return obj; } } #ifdef METH_O static PyMethodDef swigobject_methods[] = { {(char *)"disown", (PyCFunction)PySwigObject_disown, METH_NOARGS, (char *)"releases ownership of the pointer"}, {(char *)"acquire", (PyCFunction)PySwigObject_acquire, METH_NOARGS, (char *)"aquires ownership of the pointer"}, {(char *)"own", (PyCFunction)PySwigObject_own, METH_VARARGS, (char *)"returns/sets ownership of the pointer"}, {(char *)"append", (PyCFunction)PySwigObject_append, METH_O, (char *)"appends another 'this' object"}, {(char *)"next", (PyCFunction)PySwigObject_next, METH_NOARGS, (char *)"returns the next 'this' object"}, {(char *)"__repr__",(PyCFunction)PySwigObject_repr, METH_NOARGS, (char *)"returns object representation"}, {0, 0, 0, 0} }; #else static PyMethodDef swigobject_methods[] = { {(char *)"disown", (PyCFunction)PySwigObject_disown, METH_VARARGS, (char *)"releases ownership of the pointer"}, {(char *)"acquire", (PyCFunction)PySwigObject_acquire, METH_VARARGS, (char *)"aquires ownership of the pointer"}, {(char *)"own", (PyCFunction)PySwigObject_own, METH_VARARGS, (char *)"returns/sets ownership of the pointer"}, {(char *)"append", (PyCFunction)PySwigObject_append, METH_VARARGS, (char *)"appends another 'this' object"}, {(char *)"next", (PyCFunction)PySwigObject_next, METH_VARARGS, (char *)"returns the next 'this' object"}, {(char *)"__repr__",(PyCFunction)PySwigObject_repr, METH_VARARGS, (char *)"returns object representation"}, {0, 0, 0, 0} }; #endif #if PY_VERSION_HEX < 0x02020000 SWIGINTERN PyObject * PySwigObject_getattr(PySwigObject *sobj,char *name) { return Py_FindMethod(swigobject_methods, (PyObject *)sobj, name); } #endif SWIGRUNTIME PyTypeObject* _PySwigObject_type(void) { static char swigobject_doc[] = "Swig object carries a C/C++ instance pointer"; static PyNumberMethods PySwigObject_as_number = { (binaryfunc)0, /*nb_add*/ (binaryfunc)0, /*nb_subtract*/ (binaryfunc)0, /*nb_multiply*/ (binaryfunc)0, /*nb_divide*/ (binaryfunc)0, /*nb_remainder*/ (binaryfunc)0, /*nb_divmod*/ (ternaryfunc)0,/*nb_power*/ (unaryfunc)0, /*nb_negative*/ (unaryfunc)0, /*nb_positive*/ (unaryfunc)0, /*nb_absolute*/ (inquiry)0, /*nb_nonzero*/ 0, /*nb_invert*/ 0, /*nb_lshift*/ 0, /*nb_rshift*/ 0, /*nb_and*/ 0, /*nb_xor*/ 0, /*nb_or*/ (coercion)0, /*nb_coerce*/ (unaryfunc)PySwigObject_long, /*nb_int*/ (unaryfunc)PySwigObject_long, /*nb_long*/ (unaryfunc)0, /*nb_float*/ (unaryfunc)PySwigObject_oct, /*nb_oct*/ (unaryfunc)PySwigObject_hex, /*nb_hex*/ #if PY_VERSION_HEX >= 0x02050000 /* 2.5.0 */ 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 /* nb_inplace_add -> nb_index */ #elif PY_VERSION_HEX >= 0x02020000 /* 2.2.0 */ 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 /* nb_inplace_add -> nb_inplace_true_divide */ #elif PY_VERSION_HEX >= 0x02000000 /* 2.0.0 */ 0,0,0,0,0,0,0,0,0,0,0 /* nb_inplace_add -> nb_inplace_or */ #endif }; static PyTypeObject pyswigobject_type; static int type_init = 0; if (!type_init) { const PyTypeObject tmp = { PyObject_HEAD_INIT(NULL) 0, /* ob_size */ (char *)"PySwigObject", /* tp_name */ sizeof(PySwigObject), /* tp_basicsize */ 0, /* tp_itemsize */ (destructor)PySwigObject_dealloc, /* tp_dealloc */ (printfunc)PySwigObject_print, /* tp_print */ #if PY_VERSION_HEX < 0x02020000 (getattrfunc)PySwigObject_getattr, /* tp_getattr */ #else (getattrfunc)0, /* tp_getattr */ #endif (setattrfunc)0, /* tp_setattr */ (cmpfunc)PySwigObject_compare, /* tp_compare */ (reprfunc)PySwigObject_repr, /* tp_repr */ &PySwigObject_as_number, /* tp_as_number */ 0, /* tp_as_sequence */ 0, /* tp_as_mapping */ (hashfunc)0, /* tp_hash */ (ternaryfunc)0, /* tp_call */ (reprfunc)PySwigObject_str, /* tp_str */ PyObject_GenericGetAttr, /* tp_getattro */ 0, /* tp_setattro */ 0, /* tp_as_buffer */ Py_TPFLAGS_DEFAULT, /* tp_flags */ swigobject_doc, /* tp_doc */ 0, /* tp_traverse */ 0, /* tp_clear */ 0, /* tp_richcompare */ 0, /* tp_weaklistoffset */ #if PY_VERSION_HEX >= 0x02020000 0, /* tp_iter */ 0, /* tp_iternext */ swigobject_methods, /* tp_methods */ 0, /* tp_members */ 0, /* tp_getset */ 0, /* tp_base */ 0, /* tp_dict */ 0, /* tp_descr_get */ 0, /* tp_descr_set */ 0, /* tp_dictoffset */ 0, /* tp_init */ 0, /* tp_alloc */ 0, /* tp_new */ 0, /* tp_free */ 0, /* tp_is_gc */ 0, /* tp_bases */ 0, /* tp_mro */ 0, /* tp_cache */ 0, /* tp_subclasses */ 0, /* tp_weaklist */ #endif #if PY_VERSION_HEX >= 0x02030000 0, /* tp_del */ #endif #ifdef COUNT_ALLOCS 0,0,0,0 /* tp_alloc -> tp_next */ #endif }; pyswigobject_type = tmp; pyswigobject_type.ob_type = &PyType_Type; type_init = 1; } return &pyswigobject_type; } SWIGRUNTIME PyObject * PySwigObject_New(void *ptr, swig_type_info *ty, int own) { PySwigObject *sobj = PyObject_NEW(PySwigObject, PySwigObject_type()); if (sobj) { sobj->ptr = ptr; sobj->ty = ty; sobj->own = own; sobj->next = 0; } return (PyObject *)sobj; } /* ----------------------------------------------------------------------------- * Implements a simple Swig Packed type, and use it instead of string * ----------------------------------------------------------------------------- */ typedef struct { PyObject_HEAD void *pack; swig_type_info *ty; size_t size; } PySwigPacked; SWIGRUNTIME int PySwigPacked_print(PySwigPacked *v, FILE *fp, int SWIGUNUSEDPARM(flags)) { char result[SWIG_BUFFER_SIZE]; fputs("pack, v->size, 0, sizeof(result))) { fputs("at ", fp); fputs(result, fp); } fputs(v->ty->name,fp); fputs(">", fp); return 0; } SWIGRUNTIME PyObject * PySwigPacked_repr(PySwigPacked *v) { char result[SWIG_BUFFER_SIZE]; if (SWIG_PackDataName(result, v->pack, v->size, 0, sizeof(result))) { return PyString_FromFormat("", result, v->ty->name); } else { return PyString_FromFormat("", v->ty->name); } } SWIGRUNTIME PyObject * PySwigPacked_str(PySwigPacked *v) { char result[SWIG_BUFFER_SIZE]; if (SWIG_PackDataName(result, v->pack, v->size, 0, sizeof(result))){ return PyString_FromFormat("%s%s", result, v->ty->name); } else { return PyString_FromString(v->ty->name); } } SWIGRUNTIME int PySwigPacked_compare(PySwigPacked *v, PySwigPacked *w) { size_t i = v->size; size_t j = w->size; int s = (i < j) ? -1 : ((i > j) ? 1 : 0); return s ? s : strncmp((char *)v->pack, (char *)w->pack, 2*v->size); } SWIGRUNTIME PyTypeObject* _PySwigPacked_type(void); SWIGRUNTIME PyTypeObject* PySwigPacked_type(void) { static PyTypeObject *SWIG_STATIC_POINTER(type) = _PySwigPacked_type(); return type; } SWIGRUNTIMEINLINE int PySwigPacked_Check(PyObject *op) { return ((op)->ob_type == _PySwigPacked_type()) || (strcmp((op)->ob_type->tp_name,"PySwigPacked") == 0); } SWIGRUNTIME void PySwigPacked_dealloc(PyObject *v) { if (PySwigPacked_Check(v)) { PySwigPacked *sobj = (PySwigPacked *) v; free(sobj->pack); } PyObject_DEL(v); } SWIGRUNTIME PyTypeObject* _PySwigPacked_type(void) { static char swigpacked_doc[] = "Swig object carries a C/C++ instance pointer"; static PyTypeObject pyswigpacked_type; static int type_init = 0; if (!type_init) { const PyTypeObject tmp = { PyObject_HEAD_INIT(NULL) 0, /* ob_size */ (char *)"PySwigPacked", /* tp_name */ sizeof(PySwigPacked), /* tp_basicsize */ 0, /* tp_itemsize */ (destructor)PySwigPacked_dealloc, /* tp_dealloc */ (printfunc)PySwigPacked_print, /* tp_print */ (getattrfunc)0, /* tp_getattr */ (setattrfunc)0, /* tp_setattr */ (cmpfunc)PySwigPacked_compare, /* tp_compare */ (reprfunc)PySwigPacked_repr, /* tp_repr */ 0, /* tp_as_number */ 0, /* tp_as_sequence */ 0, /* tp_as_mapping */ (hashfunc)0, /* tp_hash */ (ternaryfunc)0, /* tp_call */ (reprfunc)PySwigPacked_str, /* tp_str */ PyObject_GenericGetAttr, /* tp_getattro */ 0, /* tp_setattro */ 0, /* tp_as_buffer */ Py_TPFLAGS_DEFAULT, /* tp_flags */ swigpacked_doc, /* tp_doc */ 0, /* tp_traverse */ 0, /* tp_clear */ 0, /* tp_richcompare */ 0, /* tp_weaklistoffset */ #if PY_VERSION_HEX >= 0x02020000 0, /* tp_iter */ 0, /* tp_iternext */ 0, /* tp_methods */ 0, /* tp_members */ 0, /* tp_getset */ 0, /* tp_base */ 0, /* tp_dict */ 0, /* tp_descr_get */ 0, /* tp_descr_set */ 0, /* tp_dictoffset */ 0, /* tp_init */ 0, /* tp_alloc */ 0, /* tp_new */ 0, /* tp_free */ 0, /* tp_is_gc */ 0, /* tp_bases */ 0, /* tp_mro */ 0, /* tp_cache */ 0, /* tp_subclasses */ 0, /* tp_weaklist */ #endif #if PY_VERSION_HEX >= 0x02030000 0, /* tp_del */ #endif #ifdef COUNT_ALLOCS 0,0,0,0 /* tp_alloc -> tp_next */ #endif }; pyswigpacked_type = tmp; pyswigpacked_type.ob_type = &PyType_Type; type_init = 1; } return &pyswigpacked_type; } SWIGRUNTIME PyObject * PySwigPacked_New(void *ptr, size_t size, swig_type_info *ty) { PySwigPacked *sobj = PyObject_NEW(PySwigPacked, PySwigPacked_type()); if (sobj) { void *pack = malloc(size); if (pack) { memcpy(pack, ptr, size); sobj->pack = pack; sobj->ty = ty; sobj->size = size; } else { PyObject_DEL((PyObject *) sobj); sobj = 0; } } return (PyObject *) sobj; } SWIGRUNTIME swig_type_info * PySwigPacked_UnpackData(PyObject *obj, void *ptr, size_t size) { if (PySwigPacked_Check(obj)) { PySwigPacked *sobj = (PySwigPacked *)obj; if (sobj->size != size) return 0; memcpy(ptr, sobj->pack, size); return sobj->ty; } else { return 0; } } /* ----------------------------------------------------------------------------- * pointers/data manipulation * ----------------------------------------------------------------------------- */ SWIGRUNTIMEINLINE PyObject * _SWIG_This(void) { return PyString_FromString("this"); } SWIGRUNTIME PyObject * SWIG_This(void) { static PyObject *SWIG_STATIC_POINTER(swig_this) = _SWIG_This(); return swig_this; } /* #define SWIG_PYTHON_SLOW_GETSET_THIS */ SWIGRUNTIME PySwigObject * SWIG_Python_GetSwigThis(PyObject *pyobj) { if (PySwigObject_Check(pyobj)) { return (PySwigObject *) pyobj; } else { PyObject *obj = 0; #if (!defined(SWIG_PYTHON_SLOW_GETSET_THIS) && (PY_VERSION_HEX >= 0x02030000)) if (PyInstance_Check(pyobj)) { obj = _PyInstance_Lookup(pyobj, SWIG_This()); } else { PyObject **dictptr = _PyObject_GetDictPtr(pyobj); if (dictptr != NULL) { PyObject *dict = *dictptr; obj = dict ? PyDict_GetItem(dict, SWIG_This()) : 0; } else { #ifdef PyWeakref_CheckProxy if (PyWeakref_CheckProxy(pyobj)) { PyObject *wobj = PyWeakref_GET_OBJECT(pyobj); return wobj ? SWIG_Python_GetSwigThis(wobj) : 0; } #endif obj = PyObject_GetAttr(pyobj,SWIG_This()); if (obj) { Py_DECREF(obj); } else { if (PyErr_Occurred()) PyErr_Clear(); return 0; } } } #else obj = PyObject_GetAttr(pyobj,SWIG_This()); if (obj) { Py_DECREF(obj); } else { if (PyErr_Occurred()) PyErr_Clear(); return 0; } #endif if (obj && !PySwigObject_Check(obj)) { /* a PyObject is called 'this', try to get the 'real this' PySwigObject from it */ return SWIG_Python_GetSwigThis(obj); } return (PySwigObject *)obj; } } /* Acquire a pointer value */ SWIGRUNTIME int SWIG_Python_AcquirePtr(PyObject *obj, int own) { if (own) { PySwigObject *sobj = SWIG_Python_GetSwigThis(obj); if (sobj) { int oldown = sobj->own; sobj->own = own; return oldown; } } return 0; } /* Convert a pointer value */ SWIGRUNTIME int SWIG_Python_ConvertPtrAndOwn(PyObject *obj, void **ptr, swig_type_info *ty, int flags, int *own) { if (!obj) return SWIG_ERROR; if (obj == Py_None) { if (ptr) *ptr = 0; return SWIG_OK; } else { PySwigObject *sobj = SWIG_Python_GetSwigThis(obj); while (sobj) { void *vptr = sobj->ptr; if (ty) { swig_type_info *to = sobj->ty; if (to == ty) { /* no type cast needed */ if (ptr) *ptr = vptr; break; } else { swig_cast_info *tc = SWIG_TypeCheck(to->name,ty); if (!tc) { sobj = (PySwigObject *)sobj->next; } else { if (ptr) *ptr = SWIG_TypeCast(tc,vptr); break; } } } else { if (ptr) *ptr = vptr; break; } } if (sobj) { if (own) *own = sobj->own; if (flags & SWIG_POINTER_DISOWN) { sobj->own = 0; } return SWIG_OK; } else { int res = SWIG_ERROR; if (flags & SWIG_POINTER_IMPLICIT_CONV) { PySwigClientData *data = ty ? (PySwigClientData *) ty->clientdata : 0; if (data && !data->implicitconv) { PyObject *klass = data->klass; if (klass) { PyObject *impconv; data->implicitconv = 1; /* avoid recursion and call 'explicit' constructors*/ impconv = SWIG_Python_CallFunctor(klass, obj); data->implicitconv = 0; if (PyErr_Occurred()) { PyErr_Clear(); impconv = 0; } if (impconv) { PySwigObject *iobj = SWIG_Python_GetSwigThis(impconv); if (iobj) { void *vptr; res = SWIG_Python_ConvertPtrAndOwn((PyObject*)iobj, &vptr, ty, 0, 0); if (SWIG_IsOK(res)) { if (ptr) { *ptr = vptr; /* transfer the ownership to 'ptr' */ iobj->own = 0; res = SWIG_AddCast(res); res = SWIG_AddNewMask(res); } else { res = SWIG_AddCast(res); } } } Py_DECREF(impconv); } } } } return res; } } } /* Convert a function ptr value */ SWIGRUNTIME int SWIG_Python_ConvertFunctionPtr(PyObject *obj, void **ptr, swig_type_info *ty) { if (!PyCFunction_Check(obj)) { return SWIG_ConvertPtr(obj, ptr, ty, 0); } else { void *vptr = 0; /* here we get the method pointer for callbacks */ const char *doc = (((PyCFunctionObject *)obj) -> m_ml -> ml_doc); const char *desc = doc ? strstr(doc, "swig_ptr: ") : 0; if (desc) { desc = ty ? SWIG_UnpackVoidPtr(desc + 10, &vptr, ty->name) : 0; if (!desc) return SWIG_ERROR; } if (ty) { swig_cast_info *tc = SWIG_TypeCheck(desc,ty); if (!tc) return SWIG_ERROR; *ptr = SWIG_TypeCast(tc,vptr); } else { *ptr = vptr; } return SWIG_OK; } } /* Convert a packed value value */ SWIGRUNTIME int SWIG_Python_ConvertPacked(PyObject *obj, void *ptr, size_t sz, swig_type_info *ty) { swig_type_info *to = PySwigPacked_UnpackData(obj, ptr, sz); if (!to) return SWIG_ERROR; if (ty) { if (to != ty) { /* check type cast? */ swig_cast_info *tc = SWIG_TypeCheck(to->name,ty); if (!tc) return SWIG_ERROR; } } return SWIG_OK; } /* ----------------------------------------------------------------------------- * Create a new pointer object * ----------------------------------------------------------------------------- */ /* Create a new instance object, whitout calling __init__, and set the 'this' attribute. */ SWIGRUNTIME PyObject* SWIG_Python_NewShadowInstance(PySwigClientData *data, PyObject *swig_this) { #if (PY_VERSION_HEX >= 0x02020000) PyObject *inst = 0; PyObject *newraw = data->newraw; if (newraw) { inst = PyObject_Call(newraw, data->newargs, NULL); if (inst) { #if !defined(SWIG_PYTHON_SLOW_GETSET_THIS) PyObject **dictptr = _PyObject_GetDictPtr(inst); if (dictptr != NULL) { PyObject *dict = *dictptr; if (dict == NULL) { dict = PyDict_New(); *dictptr = dict; PyDict_SetItem(dict, SWIG_This(), swig_this); } } #else PyObject *key = SWIG_This(); PyObject_SetAttr(inst, key, swig_this); #endif } } else { PyObject *dict = PyDict_New(); PyDict_SetItem(dict, SWIG_This(), swig_this); inst = PyInstance_NewRaw(data->newargs, dict); Py_DECREF(dict); } return inst; #else #if (PY_VERSION_HEX >= 0x02010000) PyObject *inst; PyObject *dict = PyDict_New(); PyDict_SetItem(dict, SWIG_This(), swig_this); inst = PyInstance_NewRaw(data->newargs, dict); Py_DECREF(dict); return (PyObject *) inst; #else PyInstanceObject *inst = PyObject_NEW(PyInstanceObject, &PyInstance_Type); if (inst == NULL) { return NULL; } inst->in_class = (PyClassObject *)data->newargs; Py_INCREF(inst->in_class); inst->in_dict = PyDict_New(); if (inst->in_dict == NULL) { Py_DECREF(inst); return NULL; } #ifdef Py_TPFLAGS_HAVE_WEAKREFS inst->in_weakreflist = NULL; #endif #ifdef Py_TPFLAGS_GC PyObject_GC_Init(inst); #endif PyDict_SetItem(inst->in_dict, SWIG_This(), swig_this); return (PyObject *) inst; #endif #endif } SWIGRUNTIME void SWIG_Python_SetSwigThis(PyObject *inst, PyObject *swig_this) { PyObject *dict; #if (PY_VERSION_HEX >= 0x02020000) && !defined(SWIG_PYTHON_SLOW_GETSET_THIS) PyObject **dictptr = _PyObject_GetDictPtr(inst); if (dictptr != NULL) { dict = *dictptr; if (dict == NULL) { dict = PyDict_New(); *dictptr = dict; } PyDict_SetItem(dict, SWIG_This(), swig_this); return; } #endif dict = PyObject_GetAttrString(inst, (char*)"__dict__"); PyDict_SetItem(dict, SWIG_This(), swig_this); Py_DECREF(dict); } SWIGINTERN PyObject * SWIG_Python_InitShadowInstance(PyObject *args) { PyObject *obj[2]; if (!SWIG_Python_UnpackTuple(args,(char*)"swiginit", 2, 2, obj)) { return NULL; } else { PySwigObject *sthis = SWIG_Python_GetSwigThis(obj[0]); if (sthis) { PySwigObject_append((PyObject*) sthis, obj[1]); } else { SWIG_Python_SetSwigThis(obj[0], obj[1]); } return SWIG_Py_Void(); } } /* Create a new pointer object */ SWIGRUNTIME PyObject * SWIG_Python_NewPointerObj(void *ptr, swig_type_info *type, int flags) { if (!ptr) { return SWIG_Py_Void(); } else { int own = (flags & SWIG_POINTER_OWN) ? SWIG_POINTER_OWN : 0; PyObject *robj = PySwigObject_New(ptr, type, own); PySwigClientData *clientdata = type ? (PySwigClientData *)(type->clientdata) : 0; if (clientdata && !(flags & SWIG_POINTER_NOSHADOW)) { PyObject *inst = SWIG_Python_NewShadowInstance(clientdata, robj); if (inst) { Py_DECREF(robj); robj = inst; } } return robj; } } /* Create a new packed object */ SWIGRUNTIMEINLINE PyObject * SWIG_Python_NewPackedObj(void *ptr, size_t sz, swig_type_info *type) { return ptr ? PySwigPacked_New((void *) ptr, sz, type) : SWIG_Py_Void(); } /* -----------------------------------------------------------------------------* * Get type list * -----------------------------------------------------------------------------*/ #ifdef SWIG_LINK_RUNTIME void *SWIG_ReturnGlobalTypeList(void *); #endif SWIGRUNTIME swig_module_info * SWIG_Python_GetModule(void) { static void *type_pointer = (void *)0; /* first check if module already created */ if (!type_pointer) { #ifdef SWIG_LINK_RUNTIME type_pointer = SWIG_ReturnGlobalTypeList((void *)0); #else type_pointer = PyCObject_Import((char*)"swig_runtime_data" SWIG_RUNTIME_VERSION, (char*)"type_pointer" SWIG_TYPE_TABLE_NAME); if (PyErr_Occurred()) { PyErr_Clear(); type_pointer = (void *)0; } #endif } return (swig_module_info *) type_pointer; } #if PY_MAJOR_VERSION < 2 /* PyModule_AddObject function was introduced in Python 2.0. The following function is copied out of Python/modsupport.c in python version 2.3.4 */ SWIGINTERN int PyModule_AddObject(PyObject *m, char *name, PyObject *o) { PyObject *dict; if (!PyModule_Check(m)) { PyErr_SetString(PyExc_TypeError, "PyModule_AddObject() needs module as first arg"); return SWIG_ERROR; } if (!o) { PyErr_SetString(PyExc_TypeError, "PyModule_AddObject() needs non-NULL value"); return SWIG_ERROR; } dict = PyModule_GetDict(m); if (dict == NULL) { /* Internal error -- modules must have a dict! */ PyErr_Format(PyExc_SystemError, "module '%s' has no __dict__", PyModule_GetName(m)); return SWIG_ERROR; } if (PyDict_SetItemString(dict, name, o)) return SWIG_ERROR; Py_DECREF(o); return SWIG_OK; } #endif SWIGRUNTIME void SWIG_Python_DestroyModule(void *vptr) { swig_module_info *swig_module = (swig_module_info *) vptr; swig_type_info **types = swig_module->types; size_t i; for (i =0; i < swig_module->size; ++i) { swig_type_info *ty = types[i]; if (ty->owndata) { PySwigClientData *data = (PySwigClientData *) ty->clientdata; if (data) PySwigClientData_Del(data); } } Py_DECREF(SWIG_This()); } SWIGRUNTIME void SWIG_Python_SetModule(swig_module_info *swig_module) { static PyMethodDef swig_empty_runtime_method_table[] = { {NULL, NULL, 0, NULL} };/* Sentinel */ PyObject *module = Py_InitModule((char*)"swig_runtime_data" SWIG_RUNTIME_VERSION, swig_empty_runtime_method_table); PyObject *pointer = PyCObject_FromVoidPtr((void *) swig_module, SWIG_Python_DestroyModule); if (pointer && module) { PyModule_AddObject(module, (char*)"type_pointer" SWIG_TYPE_TABLE_NAME, pointer); } else { Py_XDECREF(pointer); } } /* The python cached type query */ SWIGRUNTIME PyObject * SWIG_Python_TypeCache(void) { static PyObject *SWIG_STATIC_POINTER(cache) = PyDict_New(); return cache; } SWIGRUNTIME swig_type_info * SWIG_Python_TypeQuery(const char *type) { PyObject *cache = SWIG_Python_TypeCache(); PyObject *key = PyString_FromString(type); PyObject *obj = PyDict_GetItem(cache, key); swig_type_info *descriptor; if (obj) { descriptor = (swig_type_info *) PyCObject_AsVoidPtr(obj); } else { swig_module_info *swig_module = SWIG_Python_GetModule(); descriptor = SWIG_TypeQueryModule(swig_module, swig_module, type); if (descriptor) { obj = PyCObject_FromVoidPtr(descriptor, NULL); PyDict_SetItem(cache, key, obj); Py_DECREF(obj); } } Py_DECREF(key); return descriptor; } /* For backward compatibility only */ #define SWIG_POINTER_EXCEPTION 0 #define SWIG_arg_fail(arg) SWIG_Python_ArgFail(arg) #define SWIG_MustGetPtr(p, type, argnum, flags) SWIG_Python_MustGetPtr(p, type, argnum, flags) SWIGRUNTIME int SWIG_Python_AddErrMesg(const char* mesg, int infront) { if (PyErr_Occurred()) { PyObject *type = 0; PyObject *value = 0; PyObject *traceback = 0; PyErr_Fetch(&type, &value, &traceback); if (value) { PyObject *old_str = PyObject_Str(value); Py_XINCREF(type); PyErr_Clear(); if (infront) { PyErr_Format(type, "%s %s", mesg, PyString_AsString(old_str)); } else { PyErr_Format(type, "%s %s", PyString_AsString(old_str), mesg); } Py_DECREF(old_str); } return 1; } else { return 0; } } SWIGRUNTIME int SWIG_Python_ArgFail(int argnum) { if (PyErr_Occurred()) { /* add information about failing argument */ char mesg[256]; PyOS_snprintf(mesg, sizeof(mesg), "argument number %d:", argnum); return SWIG_Python_AddErrMesg(mesg, 1); } else { return 0; } } SWIGRUNTIMEINLINE const char * PySwigObject_GetDesc(PyObject *self) { PySwigObject *v = (PySwigObject *)self; swig_type_info *ty = v ? v->ty : 0; return ty ? ty->str : (char*)""; } SWIGRUNTIME void SWIG_Python_TypeError(const char *type, PyObject *obj) { if (type) { #if defined(SWIG_COBJECT_TYPES) if (obj && PySwigObject_Check(obj)) { const char *otype = (const char *) PySwigObject_GetDesc(obj); if (otype) { PyErr_Format(PyExc_TypeError, "a '%s' is expected, 'PySwigObject(%s)' is received", type, otype); return; } } else #endif { const char *otype = (obj ? obj->ob_type->tp_name : 0); if (otype) { PyObject *str = PyObject_Str(obj); const char *cstr = str ? PyString_AsString(str) : 0; if (cstr) { PyErr_Format(PyExc_TypeError, "a '%s' is expected, '%s(%s)' is received", type, otype, cstr); } else { PyErr_Format(PyExc_TypeError, "a '%s' is expected, '%s' is received", type, otype); } Py_XDECREF(str); return; } } PyErr_Format(PyExc_TypeError, "a '%s' is expected", type); } else { PyErr_Format(PyExc_TypeError, "unexpected type is received"); } } /* Convert a pointer value, signal an exception on a type mismatch */ SWIGRUNTIME void * SWIG_Python_MustGetPtr(PyObject *obj, swig_type_info *ty, int argnum, int flags) { void *result; if (SWIG_Python_ConvertPtr(obj, &result, ty, flags) == -1) { PyErr_Clear(); if (flags & SWIG_POINTER_EXCEPTION) { SWIG_Python_TypeError(SWIG_TypePrettyName(ty), obj); SWIG_Python_ArgFail(argnum); } } return result; } #ifdef __cplusplus #if 0 { /* cc-mode */ #endif } #endif #define SWIG_exception_fail(code, msg) do { SWIG_Error(code, msg); SWIG_fail; } while(0) #define SWIG_contract_assert(expr, msg) if (!(expr)) { SWIG_Error(SWIG_RuntimeError, msg); SWIG_fail; } else /* -------- TYPES TABLE (BEGIN) -------- */ #define SWIGTYPE_p_char swig_types[0] #define SWIGTYPE_p_obexftp_client_t swig_types[1] #define SWIGTYPE_p_obexftp_info_cb_t swig_types[2] static swig_type_info *swig_types[4]; static swig_module_info swig_module = {swig_types, 3, 0, 0, 0, 0}; #define SWIG_TypeQuery(name) SWIG_TypeQueryModule(&swig_module, &swig_module, name) #define SWIG_MangledTypeQuery(name) SWIG_MangledTypeQueryModule(&swig_module, &swig_module, name) /* -------- TYPES TABLE (END) -------- */ #if (PY_VERSION_HEX <= 0x02000000) # if !defined(SWIG_PYTHON_CLASSIC) # error "This python version requires swig to be run with the '-classic' option" # endif #endif /*----------------------------------------------- @(target):= _obexftp.so ------------------------------------------------*/ #define SWIG_init init_obexftp #define SWIG_name "_obexftp" #define SWIGVERSION 0x010333 #define SWIG_VERSION SWIGVERSION #define SWIG_as_voidptr(a) (void *)((const void *)(a)) #define SWIG_as_voidptrptr(a) ((void)SWIG_as_voidptr(*a),(void**)(a)) #include #include #define SWIG_From_long PyInt_FromLong SWIGINTERNINLINE PyObject * SWIG_From_int (int value) { return SWIG_From_long (value); } #include #if !defined(SWIG_NO_LLONG_MAX) # if !defined(LLONG_MAX) && defined(__GNUC__) && defined (__LONG_LONG_MAX__) # define LLONG_MAX __LONG_LONG_MAX__ # define LLONG_MIN (-LLONG_MAX - 1LL) # define ULLONG_MAX (LLONG_MAX * 2ULL + 1ULL) # endif #endif SWIGINTERN int SWIG_AsVal_double (PyObject *obj, double *val) { int res = SWIG_TypeError; if (PyFloat_Check(obj)) { if (val) *val = PyFloat_AsDouble(obj); return SWIG_OK; } else if (PyInt_Check(obj)) { if (val) *val = PyInt_AsLong(obj); return SWIG_OK; } else if (PyLong_Check(obj)) { double v = PyLong_AsDouble(obj); if (!PyErr_Occurred()) { if (val) *val = v; return SWIG_OK; } else { PyErr_Clear(); } } #ifdef SWIG_PYTHON_CAST_MODE { int dispatch = 0; double d = PyFloat_AsDouble(obj); if (!PyErr_Occurred()) { if (val) *val = d; return SWIG_AddCast(SWIG_OK); } else { PyErr_Clear(); } if (!dispatch) { long v = PyLong_AsLong(obj); if (!PyErr_Occurred()) { if (val) *val = v; return SWIG_AddCast(SWIG_AddCast(SWIG_OK)); } else { PyErr_Clear(); } } } #endif return res; } #include #include SWIGINTERNINLINE int SWIG_CanCastAsInteger(double *d, double min, double max) { double x = *d; if ((min <= x && x <= max)) { double fx = floor(x); double cx = ceil(x); double rd = ((x - fx) < 0.5) ? fx : cx; /* simple rint */ if ((errno == EDOM) || (errno == ERANGE)) { errno = 0; } else { double summ, reps, diff; if (rd < x) { diff = x - rd; } else if (rd > x) { diff = rd - x; } else { return 1; } summ = rd + x; reps = diff/summ; if (reps < 8*DBL_EPSILON) { *d = rd; return 1; } } } return 0; } SWIGINTERN int SWIG_AsVal_long (PyObject *obj, long* val) { if (PyInt_Check(obj)) { if (val) *val = PyInt_AsLong(obj); return SWIG_OK; } else if (PyLong_Check(obj)) { long v = PyLong_AsLong(obj); if (!PyErr_Occurred()) { if (val) *val = v; return SWIG_OK; } else { PyErr_Clear(); } } #ifdef SWIG_PYTHON_CAST_MODE { int dispatch = 0; long v = PyInt_AsLong(obj); if (!PyErr_Occurred()) { if (val) *val = v; return SWIG_AddCast(SWIG_OK); } else { PyErr_Clear(); } if (!dispatch) { double d; int res = SWIG_AddCast(SWIG_AsVal_double (obj,&d)); if (SWIG_IsOK(res) && SWIG_CanCastAsInteger(&d, LONG_MIN, LONG_MAX)) { if (val) *val = (long)(d); return res; } } } #endif return SWIG_TypeError; } SWIGINTERN int SWIG_AsVal_int (PyObject * obj, int *val) { long v; int res = SWIG_AsVal_long (obj, &v); if (SWIG_IsOK(res)) { if ((v < INT_MIN || v > INT_MAX)) { return SWIG_OverflowError; } else { if (val) *val = (int)(v); } } return res; } SWIGINTERN swig_type_info* SWIG_pchar_descriptor(void) { static int init = 0; static swig_type_info* info = 0; if (!init) { info = SWIG_TypeQuery("_p_char"); init = 1; } return info; } SWIGINTERN int SWIG_AsCharPtrAndSize(PyObject *obj, char** cptr, size_t* psize, int *alloc) { if (PyString_Check(obj)) { char *cstr; Py_ssize_t len; PyString_AsStringAndSize(obj, &cstr, &len); if (cptr) { if (alloc) { /* In python the user should not be able to modify the inner string representation. To warranty that, if you define SWIG_PYTHON_SAFE_CSTRINGS, a new/copy of the python string buffer is always returned. The default behavior is just to return the pointer value, so, be careful. */ #if defined(SWIG_PYTHON_SAFE_CSTRINGS) if (*alloc != SWIG_OLDOBJ) #else if (*alloc == SWIG_NEWOBJ) #endif { *cptr = (char *)memcpy((char *)malloc((len + 1)*sizeof(char)), cstr, sizeof(char)*(len + 1)); *alloc = SWIG_NEWOBJ; } else { *cptr = cstr; *alloc = SWIG_OLDOBJ; } } else { *cptr = PyString_AsString(obj); } } if (psize) *psize = len + 1; return SWIG_OK; } else { swig_type_info* pchar_descriptor = SWIG_pchar_descriptor(); if (pchar_descriptor) { void* vptr = 0; if (SWIG_ConvertPtr(obj, &vptr, pchar_descriptor, 0) == SWIG_OK) { if (cptr) *cptr = (char *) vptr; if (psize) *psize = vptr ? (strlen((char *)vptr) + 1) : 0; if (alloc) *alloc = SWIG_OLDOBJ; return SWIG_OK; } } } return SWIG_TypeError; } static void proxy_info_cb (int evt, const char *buf, int len, void *data) { PyObject *proc = (PyObject *)data; /* PyObject *msg = PyString_FromStringAndSize(buf, len); */ PyObject_CallFunction(proc, "is", evt, buf); } SWIGINTERN obexftp_client_t *new_obexftp_client_t(int transport){ return obexftp_open(transport, NULL, NULL, NULL); } SWIGINTERN void delete_obexftp_client_t(obexftp_client_t *self){ obexftp_close(self); } SWIGINTERN void obexftp_client_t_callback(obexftp_client_t *self,obexftp_info_cb_t infocb,void *user_data){ self->infocb = infocb; self->infocb_data = user_data; } SWIGINTERN char **obexftp_client_t_discover(obexftp_client_t *self){ return obexftp_discover(self->transport); } SWIGINTERN int obexftp_client_t_connect(obexftp_client_t *self,char *device,int port,char *src){ return obexftp_connect_src(self, src, device, port, UUID_FBS, sizeof(UUID_FBS)); } SWIGINTERN int obexftp_client_t_connectpush(obexftp_client_t *self,char *device,int port,char *src){ self->quirks &= ~OBEXFTP_SPLIT_SETPATH; return obexftp_connect_src(self, src, device, port, NULL, 0); } SWIGINTERN int obexftp_client_t_connectsync(obexftp_client_t *self,char *device,int port,char *src){ self->quirks &= ~OBEXFTP_SPLIT_SETPATH; return obexftp_connect_src(self, src, device, port, UUID_IRMC, sizeof(UUID_IRMC)); } SWIGINTERN int obexftp_client_t_disconnect(obexftp_client_t *self){ return obexftp_disconnect(self); } SWIGINTERN int obexftp_client_t_chpath(obexftp_client_t *self,char *name){ return obexftp_setpath(self, name, 0); } SWIGINTERN int obexftp_client_t_mkpath(obexftp_client_t *self,char *name){ return obexftp_setpath(self, name, 1); } SWIGINTERN int obexftp_client_t_cdup(obexftp_client_t *self){ return obexftp_setpath(self, NULL, 0); } SWIGINTERN int obexftp_client_t_cdtop(obexftp_client_t *self){ return obexftp_setpath(self, "", 0); } SWIGINTERN char *obexftp_client_t_get(obexftp_client_t *self,char *path){ (void) obexftp_get_type(self, NULL, NULL, path); return (char *)self->buf_data; } SWIGINTERN char *obexftp_client_t_list(obexftp_client_t *self,char *path){ (void) obexftp_get_type(self, XOBEX_LISTING, NULL, path); return (char *)self->buf_data; } SWIGINTERN char *obexftp_client_t_get_capability(obexftp_client_t *self,char *path){ (void) obexftp_get_type(self, XOBEX_CAPABILITY, NULL, path); return (char *)self->buf_data; } SWIGINTERN int obexftp_client_t_get_file(obexftp_client_t *self,char *path,char *localname){ return obexftp_get_type(self, NULL, localname, path); } SWIGINTERN int obexftp_client_t_put_file(obexftp_client_t *self,char *filename,char *remotename){ return obexftp_put_file(self, filename, remotename); } SWIGINTERN int SWIG_AsVal_unsigned_SS_long (PyObject *obj, unsigned long *val) { if (PyInt_Check(obj)) { long v = PyInt_AsLong(obj); if (v >= 0) { if (val) *val = v; return SWIG_OK; } else { return SWIG_OverflowError; } } else if (PyLong_Check(obj)) { unsigned long v = PyLong_AsUnsignedLong(obj); if (!PyErr_Occurred()) { if (val) *val = v; return SWIG_OK; } else { PyErr_Clear(); } } #ifdef SWIG_PYTHON_CAST_MODE { int dispatch = 0; unsigned long v = PyLong_AsUnsignedLong(obj); if (!PyErr_Occurred()) { if (val) *val = v; return SWIG_AddCast(SWIG_OK); } else { PyErr_Clear(); } if (!dispatch) { double d; int res = SWIG_AddCast(SWIG_AsVal_double (obj,&d)); if (SWIG_IsOK(res) && SWIG_CanCastAsInteger(&d, 0, ULONG_MAX)) { if (val) *val = (unsigned long)(d); return res; } } } #endif return SWIG_TypeError; } SWIGINTERNINLINE int SWIG_AsVal_size_t (PyObject * obj, size_t *val) { unsigned long v; int res = SWIG_AsVal_unsigned_SS_long (obj, val ? &v : 0); if (SWIG_IsOK(res) && val) *val = (size_t)(v); return res; } SWIGINTERN int obexftp_client_t_put_data(obexftp_client_t *self,char *data,size_t size,char *remotename){ return obexftp_put_data(self, data, size, remotename); } SWIGINTERN int obexftp_client_t_delete(obexftp_client_t *self,char *name){ return obexftp_del(self, name); } #ifdef __cplusplus extern "C" { #endif SWIGINTERN PyObject *_wrap_discover(PyObject *SWIGUNUSEDPARM(self), PyObject *args) { PyObject *resultobj = 0; int arg1 ; char **result = 0 ; int val1 ; int ecode1 = 0 ; PyObject * obj0 = 0 ; if (!PyArg_ParseTuple(args,(char *)"O:discover",&obj0)) SWIG_fail; ecode1 = SWIG_AsVal_int(obj0, &val1); if (!SWIG_IsOK(ecode1)) { SWIG_exception_fail(SWIG_ArgError(ecode1), "in method '" "discover" "', argument " "1"" of type '" "int""'"); } arg1 = (int)(val1); result = (char **)obexftp_discover(arg1); { char **p; resultobj = PyList_New(0); for (p = result; p && *p; p++) PyList_Append(resultobj, PyString_FromString(*p)); } return resultobj; fail: return NULL; } SWIGINTERN PyObject *_wrap_browsebt(PyObject *SWIGUNUSEDPARM(self), PyObject *args) { PyObject *resultobj = 0; char *arg1 = (char *) 0 ; int arg2 ; int result; int res1 ; char *buf1 = 0 ; int alloc1 = 0 ; int val2 ; int ecode2 = 0 ; PyObject * obj0 = 0 ; PyObject * obj1 = 0 ; if (!PyArg_ParseTuple(args,(char *)"OO:browsebt",&obj0,&obj1)) SWIG_fail; res1 = SWIG_AsCharPtrAndSize(obj0, &buf1, NULL, &alloc1); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "browsebt" "', argument " "1"" of type '" "char *""'"); } arg1 = (char *)(buf1); ecode2 = SWIG_AsVal_int(obj1, &val2); if (!SWIG_IsOK(ecode2)) { SWIG_exception_fail(SWIG_ArgError(ecode2), "in method '" "browsebt" "', argument " "2"" of type '" "int""'"); } arg2 = (int)(val2); result = (int)obexftp_browse_bt(arg1,arg2); resultobj = SWIG_From_int((int)(result)); if (alloc1 == SWIG_NEWOBJ) free((char*)buf1); return resultobj; fail: if (alloc1 == SWIG_NEWOBJ) free((char*)buf1); return NULL; } SWIGINTERN PyObject *_wrap_new_client(PyObject *SWIGUNUSEDPARM(self), PyObject *args) { PyObject *resultobj = 0; int arg1 ; obexftp_client_t *result = 0 ; int val1 ; int ecode1 = 0 ; PyObject * obj0 = 0 ; if (!PyArg_ParseTuple(args,(char *)"O:new_client",&obj0)) SWIG_fail; ecode1 = SWIG_AsVal_int(obj0, &val1); if (!SWIG_IsOK(ecode1)) { SWIG_exception_fail(SWIG_ArgError(ecode1), "in method '" "new_client" "', argument " "1"" of type '" "int""'"); } arg1 = (int)(val1); result = (obexftp_client_t *)new_obexftp_client_t(arg1); resultobj = SWIG_NewPointerObj(SWIG_as_voidptr(result), SWIGTYPE_p_obexftp_client_t, SWIG_POINTER_NEW | 0 ); return resultobj; fail: return NULL; } SWIGINTERN PyObject *_wrap_delete_client(PyObject *SWIGUNUSEDPARM(self), PyObject *args) { PyObject *resultobj = 0; obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; void *argp1 = 0 ; int res1 = 0 ; PyObject * obj0 = 0 ; if (!PyArg_ParseTuple(args,(char *)"O:delete_client",&obj0)) SWIG_fail; res1 = SWIG_ConvertPtr(obj0, &argp1,SWIGTYPE_p_obexftp_client_t, SWIG_POINTER_DISOWN | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "delete_client" "', argument " "1"" of type '" "obexftp_client_t *""'"); } arg1 = (obexftp_client_t *)(argp1); delete_obexftp_client_t(arg1); resultobj = SWIG_Py_Void(); return resultobj; fail: return NULL; } SWIGINTERN PyObject *_wrap_client_callback(PyObject *SWIGUNUSEDPARM(self), PyObject *args) { PyObject *resultobj = 0; obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; obexftp_info_cb_t arg2 ; void *arg3 = (void *) 0 ; void *argp1 = 0 ; int res1 = 0 ; PyObject * obj0 = 0 ; PyObject * obj1 = 0 ; if (!PyArg_ParseTuple(args,(char *)"OO:client_callback",&obj0,&obj1)) SWIG_fail; res1 = SWIG_ConvertPtr(obj0, &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "client_callback" "', argument " "1"" of type '" "obexftp_client_t *""'"); } arg1 = (obexftp_client_t *)(argp1); { if (!PyCallable_Check(obj1)) { /* should raise an exception here */ arg2 = NULL; arg3 = NULL; } else { Py_XINCREF(obj1); arg2 = proxy_info_cb; arg3 = obj1; } } obexftp_client_t_callback(arg1,arg2,arg3); resultobj = SWIG_Py_Void(); return resultobj; fail: return NULL; } SWIGINTERN PyObject *_wrap_client_discover(PyObject *SWIGUNUSEDPARM(self), PyObject *args) { PyObject *resultobj = 0; obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; char **result = 0 ; void *argp1 = 0 ; int res1 = 0 ; PyObject * obj0 = 0 ; if (!PyArg_ParseTuple(args,(char *)"O:client_discover",&obj0)) SWIG_fail; res1 = SWIG_ConvertPtr(obj0, &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "client_discover" "', argument " "1"" of type '" "obexftp_client_t *""'"); } arg1 = (obexftp_client_t *)(argp1); result = (char **)obexftp_client_t_discover(arg1); { char **p; resultobj = PyList_New(0); for (p = result; p && *p; p++) PyList_Append(resultobj, PyString_FromString(*p)); } return resultobj; fail: return NULL; } SWIGINTERN PyObject *_wrap_client_connect(PyObject *SWIGUNUSEDPARM(self), PyObject *args) { PyObject *resultobj = 0; obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; char *arg2 = (char *) 0 ; int arg3 ; char *arg4 = (char *) NULL ; int result; void *argp1 = 0 ; int res1 = 0 ; int res2 ; char *buf2 = 0 ; int alloc2 = 0 ; int val3 ; int ecode3 = 0 ; int res4 ; char *buf4 = 0 ; int alloc4 = 0 ; PyObject * obj0 = 0 ; PyObject * obj1 = 0 ; PyObject * obj2 = 0 ; PyObject * obj3 = 0 ; if (!PyArg_ParseTuple(args,(char *)"OOO|O:client_connect",&obj0,&obj1,&obj2,&obj3)) SWIG_fail; res1 = SWIG_ConvertPtr(obj0, &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "client_connect" "', argument " "1"" of type '" "obexftp_client_t *""'"); } arg1 = (obexftp_client_t *)(argp1); res2 = SWIG_AsCharPtrAndSize(obj1, &buf2, NULL, &alloc2); if (!SWIG_IsOK(res2)) { SWIG_exception_fail(SWIG_ArgError(res2), "in method '" "client_connect" "', argument " "2"" of type '" "char *""'"); } arg2 = (char *)(buf2); ecode3 = SWIG_AsVal_int(obj2, &val3); if (!SWIG_IsOK(ecode3)) { SWIG_exception_fail(SWIG_ArgError(ecode3), "in method '" "client_connect" "', argument " "3"" of type '" "int""'"); } arg3 = (int)(val3); if (obj3) { res4 = SWIG_AsCharPtrAndSize(obj3, &buf4, NULL, &alloc4); if (!SWIG_IsOK(res4)) { SWIG_exception_fail(SWIG_ArgError(res4), "in method '" "client_connect" "', argument " "4"" of type '" "char *""'"); } arg4 = (char *)(buf4); } result = (int)obexftp_client_t_connect(arg1,arg2,arg3,arg4); resultobj = SWIG_From_int((int)(result)); if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); if (alloc4 == SWIG_NEWOBJ) free((char*)buf4); return resultobj; fail: if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); if (alloc4 == SWIG_NEWOBJ) free((char*)buf4); return NULL; } SWIGINTERN PyObject *_wrap_client_connectpush(PyObject *SWIGUNUSEDPARM(self), PyObject *args) { PyObject *resultobj = 0; obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; char *arg2 = (char *) 0 ; int arg3 ; char *arg4 = (char *) NULL ; int result; void *argp1 = 0 ; int res1 = 0 ; int res2 ; char *buf2 = 0 ; int alloc2 = 0 ; int val3 ; int ecode3 = 0 ; int res4 ; char *buf4 = 0 ; int alloc4 = 0 ; PyObject * obj0 = 0 ; PyObject * obj1 = 0 ; PyObject * obj2 = 0 ; PyObject * obj3 = 0 ; if (!PyArg_ParseTuple(args,(char *)"OOO|O:client_connectpush",&obj0,&obj1,&obj2,&obj3)) SWIG_fail; res1 = SWIG_ConvertPtr(obj0, &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "client_connectpush" "', argument " "1"" of type '" "obexftp_client_t *""'"); } arg1 = (obexftp_client_t *)(argp1); res2 = SWIG_AsCharPtrAndSize(obj1, &buf2, NULL, &alloc2); if (!SWIG_IsOK(res2)) { SWIG_exception_fail(SWIG_ArgError(res2), "in method '" "client_connectpush" "', argument " "2"" of type '" "char *""'"); } arg2 = (char *)(buf2); ecode3 = SWIG_AsVal_int(obj2, &val3); if (!SWIG_IsOK(ecode3)) { SWIG_exception_fail(SWIG_ArgError(ecode3), "in method '" "client_connectpush" "', argument " "3"" of type '" "int""'"); } arg3 = (int)(val3); if (obj3) { res4 = SWIG_AsCharPtrAndSize(obj3, &buf4, NULL, &alloc4); if (!SWIG_IsOK(res4)) { SWIG_exception_fail(SWIG_ArgError(res4), "in method '" "client_connectpush" "', argument " "4"" of type '" "char *""'"); } arg4 = (char *)(buf4); } result = (int)obexftp_client_t_connectpush(arg1,arg2,arg3,arg4); resultobj = SWIG_From_int((int)(result)); if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); if (alloc4 == SWIG_NEWOBJ) free((char*)buf4); return resultobj; fail: if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); if (alloc4 == SWIG_NEWOBJ) free((char*)buf4); return NULL; } SWIGINTERN PyObject *_wrap_client_connectsync(PyObject *SWIGUNUSEDPARM(self), PyObject *args) { PyObject *resultobj = 0; obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; char *arg2 = (char *) 0 ; int arg3 ; char *arg4 = (char *) NULL ; int result; void *argp1 = 0 ; int res1 = 0 ; int res2 ; char *buf2 = 0 ; int alloc2 = 0 ; int val3 ; int ecode3 = 0 ; int res4 ; char *buf4 = 0 ; int alloc4 = 0 ; PyObject * obj0 = 0 ; PyObject * obj1 = 0 ; PyObject * obj2 = 0 ; PyObject * obj3 = 0 ; if (!PyArg_ParseTuple(args,(char *)"OOO|O:client_connectsync",&obj0,&obj1,&obj2,&obj3)) SWIG_fail; res1 = SWIG_ConvertPtr(obj0, &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "client_connectsync" "', argument " "1"" of type '" "obexftp_client_t *""'"); } arg1 = (obexftp_client_t *)(argp1); res2 = SWIG_AsCharPtrAndSize(obj1, &buf2, NULL, &alloc2); if (!SWIG_IsOK(res2)) { SWIG_exception_fail(SWIG_ArgError(res2), "in method '" "client_connectsync" "', argument " "2"" of type '" "char *""'"); } arg2 = (char *)(buf2); ecode3 = SWIG_AsVal_int(obj2, &val3); if (!SWIG_IsOK(ecode3)) { SWIG_exception_fail(SWIG_ArgError(ecode3), "in method '" "client_connectsync" "', argument " "3"" of type '" "int""'"); } arg3 = (int)(val3); if (obj3) { res4 = SWIG_AsCharPtrAndSize(obj3, &buf4, NULL, &alloc4); if (!SWIG_IsOK(res4)) { SWIG_exception_fail(SWIG_ArgError(res4), "in method '" "client_connectsync" "', argument " "4"" of type '" "char *""'"); } arg4 = (char *)(buf4); } result = (int)obexftp_client_t_connectsync(arg1,arg2,arg3,arg4); resultobj = SWIG_From_int((int)(result)); if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); if (alloc4 == SWIG_NEWOBJ) free((char*)buf4); return resultobj; fail: if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); if (alloc4 == SWIG_NEWOBJ) free((char*)buf4); return NULL; } SWIGINTERN PyObject *_wrap_client_disconnect(PyObject *SWIGUNUSEDPARM(self), PyObject *args) { PyObject *resultobj = 0; obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; int result; void *argp1 = 0 ; int res1 = 0 ; PyObject * obj0 = 0 ; if (!PyArg_ParseTuple(args,(char *)"O:client_disconnect",&obj0)) SWIG_fail; res1 = SWIG_ConvertPtr(obj0, &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "client_disconnect" "', argument " "1"" of type '" "obexftp_client_t *""'"); } arg1 = (obexftp_client_t *)(argp1); result = (int)obexftp_client_t_disconnect(arg1); resultobj = SWIG_From_int((int)(result)); return resultobj; fail: return NULL; } SWIGINTERN PyObject *_wrap_client_chpath(PyObject *SWIGUNUSEDPARM(self), PyObject *args) { PyObject *resultobj = 0; obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; char *arg2 = (char *) 0 ; int result; void *argp1 = 0 ; int res1 = 0 ; int res2 ; char *buf2 = 0 ; int alloc2 = 0 ; PyObject * obj0 = 0 ; PyObject * obj1 = 0 ; if (!PyArg_ParseTuple(args,(char *)"OO:client_chpath",&obj0,&obj1)) SWIG_fail; res1 = SWIG_ConvertPtr(obj0, &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "client_chpath" "', argument " "1"" of type '" "obexftp_client_t *""'"); } arg1 = (obexftp_client_t *)(argp1); res2 = SWIG_AsCharPtrAndSize(obj1, &buf2, NULL, &alloc2); if (!SWIG_IsOK(res2)) { SWIG_exception_fail(SWIG_ArgError(res2), "in method '" "client_chpath" "', argument " "2"" of type '" "char *""'"); } arg2 = (char *)(buf2); result = (int)obexftp_client_t_chpath(arg1,arg2); resultobj = SWIG_From_int((int)(result)); if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); return resultobj; fail: if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); return NULL; } SWIGINTERN PyObject *_wrap_client_mkpath(PyObject *SWIGUNUSEDPARM(self), PyObject *args) { PyObject *resultobj = 0; obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; char *arg2 = (char *) 0 ; int result; void *argp1 = 0 ; int res1 = 0 ; int res2 ; char *buf2 = 0 ; int alloc2 = 0 ; PyObject * obj0 = 0 ; PyObject * obj1 = 0 ; if (!PyArg_ParseTuple(args,(char *)"OO:client_mkpath",&obj0,&obj1)) SWIG_fail; res1 = SWIG_ConvertPtr(obj0, &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "client_mkpath" "', argument " "1"" of type '" "obexftp_client_t *""'"); } arg1 = (obexftp_client_t *)(argp1); res2 = SWIG_AsCharPtrAndSize(obj1, &buf2, NULL, &alloc2); if (!SWIG_IsOK(res2)) { SWIG_exception_fail(SWIG_ArgError(res2), "in method '" "client_mkpath" "', argument " "2"" of type '" "char *""'"); } arg2 = (char *)(buf2); result = (int)obexftp_client_t_mkpath(arg1,arg2); resultobj = SWIG_From_int((int)(result)); if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); return resultobj; fail: if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); return NULL; } SWIGINTERN PyObject *_wrap_client_cdup(PyObject *SWIGUNUSEDPARM(self), PyObject *args) { PyObject *resultobj = 0; obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; int result; void *argp1 = 0 ; int res1 = 0 ; PyObject * obj0 = 0 ; if (!PyArg_ParseTuple(args,(char *)"O:client_cdup",&obj0)) SWIG_fail; res1 = SWIG_ConvertPtr(obj0, &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "client_cdup" "', argument " "1"" of type '" "obexftp_client_t *""'"); } arg1 = (obexftp_client_t *)(argp1); result = (int)obexftp_client_t_cdup(arg1); resultobj = SWIG_From_int((int)(result)); return resultobj; fail: return NULL; } SWIGINTERN PyObject *_wrap_client_cdtop(PyObject *SWIGUNUSEDPARM(self), PyObject *args) { PyObject *resultobj = 0; obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; int result; void *argp1 = 0 ; int res1 = 0 ; PyObject * obj0 = 0 ; if (!PyArg_ParseTuple(args,(char *)"O:client_cdtop",&obj0)) SWIG_fail; res1 = SWIG_ConvertPtr(obj0, &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "client_cdtop" "', argument " "1"" of type '" "obexftp_client_t *""'"); } arg1 = (obexftp_client_t *)(argp1); result = (int)obexftp_client_t_cdtop(arg1); resultobj = SWIG_From_int((int)(result)); return resultobj; fail: return NULL; } SWIGINTERN PyObject *_wrap_client_get(PyObject *SWIGUNUSEDPARM(self), PyObject *args) { PyObject *resultobj = 0; obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; char *arg2 = (char *) 0 ; char *result = 0 ; void *argp1 = 0 ; int res1 = 0 ; int res2 ; char *buf2 = 0 ; int alloc2 = 0 ; PyObject * obj0 = 0 ; PyObject * obj1 = 0 ; if (!PyArg_ParseTuple(args,(char *)"OO:client_get",&obj0,&obj1)) SWIG_fail; res1 = SWIG_ConvertPtr(obj0, &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "client_get" "', argument " "1"" of type '" "obexftp_client_t *""'"); } arg1 = (obexftp_client_t *)(argp1); res2 = SWIG_AsCharPtrAndSize(obj1, &buf2, NULL, &alloc2); if (!SWIG_IsOK(res2)) { SWIG_exception_fail(SWIG_ArgError(res2), "in method '" "client_get" "', argument " "2"" of type '" "char *""'"); } arg2 = (char *)(buf2); result = (char *)obexftp_client_t_get(arg1,arg2); { resultobj = PyString_FromStringAndSize(arg1->buf_data, arg1->buf_size); } if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); return resultobj; fail: if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); return NULL; } SWIGINTERN PyObject *_wrap_client_list(PyObject *SWIGUNUSEDPARM(self), PyObject *args) { PyObject *resultobj = 0; obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; char *arg2 = (char *) NULL ; char *result = 0 ; void *argp1 = 0 ; int res1 = 0 ; int res2 ; char *buf2 = 0 ; int alloc2 = 0 ; PyObject * obj0 = 0 ; PyObject * obj1 = 0 ; if (!PyArg_ParseTuple(args,(char *)"O|O:client_list",&obj0,&obj1)) SWIG_fail; res1 = SWIG_ConvertPtr(obj0, &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "client_list" "', argument " "1"" of type '" "obexftp_client_t *""'"); } arg1 = (obexftp_client_t *)(argp1); if (obj1) { res2 = SWIG_AsCharPtrAndSize(obj1, &buf2, NULL, &alloc2); if (!SWIG_IsOK(res2)) { SWIG_exception_fail(SWIG_ArgError(res2), "in method '" "client_list" "', argument " "2"" of type '" "char *""'"); } arg2 = (char *)(buf2); } result = (char *)obexftp_client_t_list(arg1,arg2); { resultobj = PyString_FromStringAndSize(arg1->buf_data, arg1->buf_size); } if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); return resultobj; fail: if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); return NULL; } SWIGINTERN PyObject *_wrap_client_get_capability(PyObject *SWIGUNUSEDPARM(self), PyObject *args) { PyObject *resultobj = 0; obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; char *arg2 = (char *) NULL ; char *result = 0 ; void *argp1 = 0 ; int res1 = 0 ; int res2 ; char *buf2 = 0 ; int alloc2 = 0 ; PyObject * obj0 = 0 ; PyObject * obj1 = 0 ; if (!PyArg_ParseTuple(args,(char *)"O|O:client_get_capability",&obj0,&obj1)) SWIG_fail; res1 = SWIG_ConvertPtr(obj0, &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "client_get_capability" "', argument " "1"" of type '" "obexftp_client_t *""'"); } arg1 = (obexftp_client_t *)(argp1); if (obj1) { res2 = SWIG_AsCharPtrAndSize(obj1, &buf2, NULL, &alloc2); if (!SWIG_IsOK(res2)) { SWIG_exception_fail(SWIG_ArgError(res2), "in method '" "client_get_capability" "', argument " "2"" of type '" "char *""'"); } arg2 = (char *)(buf2); } result = (char *)obexftp_client_t_get_capability(arg1,arg2); { resultobj = PyString_FromStringAndSize(arg1->buf_data, arg1->buf_size); } if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); return resultobj; fail: if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); return NULL; } SWIGINTERN PyObject *_wrap_client_get_file(PyObject *SWIGUNUSEDPARM(self), PyObject *args) { PyObject *resultobj = 0; obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; char *arg2 = (char *) 0 ; char *arg3 = (char *) 0 ; int result; void *argp1 = 0 ; int res1 = 0 ; int res2 ; char *buf2 = 0 ; int alloc2 = 0 ; int res3 ; char *buf3 = 0 ; int alloc3 = 0 ; PyObject * obj0 = 0 ; PyObject * obj1 = 0 ; PyObject * obj2 = 0 ; if (!PyArg_ParseTuple(args,(char *)"OOO:client_get_file",&obj0,&obj1,&obj2)) SWIG_fail; res1 = SWIG_ConvertPtr(obj0, &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "client_get_file" "', argument " "1"" of type '" "obexftp_client_t *""'"); } arg1 = (obexftp_client_t *)(argp1); res2 = SWIG_AsCharPtrAndSize(obj1, &buf2, NULL, &alloc2); if (!SWIG_IsOK(res2)) { SWIG_exception_fail(SWIG_ArgError(res2), "in method '" "client_get_file" "', argument " "2"" of type '" "char *""'"); } arg2 = (char *)(buf2); res3 = SWIG_AsCharPtrAndSize(obj2, &buf3, NULL, &alloc3); if (!SWIG_IsOK(res3)) { SWIG_exception_fail(SWIG_ArgError(res3), "in method '" "client_get_file" "', argument " "3"" of type '" "char *""'"); } arg3 = (char *)(buf3); result = (int)obexftp_client_t_get_file(arg1,arg2,arg3); resultobj = SWIG_From_int((int)(result)); if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); if (alloc3 == SWIG_NEWOBJ) free((char*)buf3); return resultobj; fail: if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); if (alloc3 == SWIG_NEWOBJ) free((char*)buf3); return NULL; } SWIGINTERN PyObject *_wrap_client_put_file(PyObject *SWIGUNUSEDPARM(self), PyObject *args) { PyObject *resultobj = 0; obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; char *arg2 = (char *) 0 ; char *arg3 = (char *) NULL ; int result; void *argp1 = 0 ; int res1 = 0 ; int res2 ; char *buf2 = 0 ; int alloc2 = 0 ; int res3 ; char *buf3 = 0 ; int alloc3 = 0 ; PyObject * obj0 = 0 ; PyObject * obj1 = 0 ; PyObject * obj2 = 0 ; if (!PyArg_ParseTuple(args,(char *)"OO|O:client_put_file",&obj0,&obj1,&obj2)) SWIG_fail; res1 = SWIG_ConvertPtr(obj0, &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "client_put_file" "', argument " "1"" of type '" "obexftp_client_t *""'"); } arg1 = (obexftp_client_t *)(argp1); res2 = SWIG_AsCharPtrAndSize(obj1, &buf2, NULL, &alloc2); if (!SWIG_IsOK(res2)) { SWIG_exception_fail(SWIG_ArgError(res2), "in method '" "client_put_file" "', argument " "2"" of type '" "char *""'"); } arg2 = (char *)(buf2); if (obj2) { res3 = SWIG_AsCharPtrAndSize(obj2, &buf3, NULL, &alloc3); if (!SWIG_IsOK(res3)) { SWIG_exception_fail(SWIG_ArgError(res3), "in method '" "client_put_file" "', argument " "3"" of type '" "char *""'"); } arg3 = (char *)(buf3); } result = (int)obexftp_client_t_put_file(arg1,arg2,arg3); resultobj = SWIG_From_int((int)(result)); if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); if (alloc3 == SWIG_NEWOBJ) free((char*)buf3); return resultobj; fail: if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); if (alloc3 == SWIG_NEWOBJ) free((char*)buf3); return NULL; } SWIGINTERN PyObject *_wrap_client_put_data(PyObject *SWIGUNUSEDPARM(self), PyObject *args) { PyObject *resultobj = 0; obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; char *arg2 = (char *) 0 ; size_t arg3 ; char *arg4 = (char *) NULL ; int result; void *argp1 = 0 ; int res1 = 0 ; int res4 ; char *buf4 = 0 ; int alloc4 = 0 ; PyObject * obj0 = 0 ; PyObject * obj1 = 0 ; PyObject * obj2 = 0 ; if (!PyArg_ParseTuple(args,(char *)"OO|O:client_put_data",&obj0,&obj1,&obj2)) SWIG_fail; res1 = SWIG_ConvertPtr(obj0, &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "client_put_data" "', argument " "1"" of type '" "obexftp_client_t *""'"); } arg1 = (obexftp_client_t *)(argp1); { /* Danger Wil Robinson */ arg2 = PyString_AsString(obj1); arg3 = PyString_Size(obj1); } if (obj2) { res4 = SWIG_AsCharPtrAndSize(obj2, &buf4, NULL, &alloc4); if (!SWIG_IsOK(res4)) { SWIG_exception_fail(SWIG_ArgError(res4), "in method '" "client_put_data" "', argument " "4"" of type '" "char *""'"); } arg4 = (char *)(buf4); } result = (int)obexftp_client_t_put_data(arg1,arg2,arg3,arg4); resultobj = SWIG_From_int((int)(result)); if (alloc4 == SWIG_NEWOBJ) free((char*)buf4); return resultobj; fail: if (alloc4 == SWIG_NEWOBJ) free((char*)buf4); return NULL; } SWIGINTERN PyObject *_wrap_client_delete(PyObject *SWIGUNUSEDPARM(self), PyObject *args) { PyObject *resultobj = 0; obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; char *arg2 = (char *) 0 ; int result; void *argp1 = 0 ; int res1 = 0 ; int res2 ; char *buf2 = 0 ; int alloc2 = 0 ; PyObject * obj0 = 0 ; PyObject * obj1 = 0 ; if (!PyArg_ParseTuple(args,(char *)"OO:client_delete",&obj0,&obj1)) SWIG_fail; res1 = SWIG_ConvertPtr(obj0, &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "client_delete" "', argument " "1"" of type '" "obexftp_client_t *""'"); } arg1 = (obexftp_client_t *)(argp1); res2 = SWIG_AsCharPtrAndSize(obj1, &buf2, NULL, &alloc2); if (!SWIG_IsOK(res2)) { SWIG_exception_fail(SWIG_ArgError(res2), "in method '" "client_delete" "', argument " "2"" of type '" "char *""'"); } arg2 = (char *)(buf2); result = (int)obexftp_client_t_delete(arg1,arg2); resultobj = SWIG_From_int((int)(result)); if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); return resultobj; fail: if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); return NULL; } SWIGINTERN PyObject *client_swigregister(PyObject *SWIGUNUSEDPARM(self), PyObject *args) { PyObject *obj; if (!PyArg_ParseTuple(args,(char*)"O|swigregister", &obj)) return NULL; SWIG_TypeNewClientData(SWIGTYPE_p_obexftp_client_t, SWIG_NewClientData(obj)); return SWIG_Py_Void(); } static PyMethodDef SwigMethods[] = { { (char *)"discover", _wrap_discover, METH_VARARGS, NULL}, { (char *)"browsebt", _wrap_browsebt, METH_VARARGS, NULL}, { (char *)"new_client", _wrap_new_client, METH_VARARGS, NULL}, { (char *)"delete_client", _wrap_delete_client, METH_VARARGS, NULL}, { (char *)"client_callback", _wrap_client_callback, METH_VARARGS, NULL}, { (char *)"client_discover", _wrap_client_discover, METH_VARARGS, NULL}, { (char *)"client_connect", _wrap_client_connect, METH_VARARGS, NULL}, { (char *)"client_connectpush", _wrap_client_connectpush, METH_VARARGS, NULL}, { (char *)"client_connectsync", _wrap_client_connectsync, METH_VARARGS, NULL}, { (char *)"client_disconnect", _wrap_client_disconnect, METH_VARARGS, NULL}, { (char *)"client_chpath", _wrap_client_chpath, METH_VARARGS, NULL}, { (char *)"client_mkpath", _wrap_client_mkpath, METH_VARARGS, NULL}, { (char *)"client_cdup", _wrap_client_cdup, METH_VARARGS, NULL}, { (char *)"client_cdtop", _wrap_client_cdtop, METH_VARARGS, NULL}, { (char *)"client_get", _wrap_client_get, METH_VARARGS, NULL}, { (char *)"client_list", _wrap_client_list, METH_VARARGS, NULL}, { (char *)"client_get_capability", _wrap_client_get_capability, METH_VARARGS, NULL}, { (char *)"client_get_file", _wrap_client_get_file, METH_VARARGS, NULL}, { (char *)"client_put_file", _wrap_client_put_file, METH_VARARGS, NULL}, { (char *)"client_put_data", _wrap_client_put_data, METH_VARARGS, NULL}, { (char *)"client_delete", _wrap_client_delete, METH_VARARGS, NULL}, { (char *)"client_swigregister", client_swigregister, METH_VARARGS, NULL}, { NULL, NULL, 0, NULL } }; /* -------- TYPE CONVERSION AND EQUIVALENCE RULES (BEGIN) -------- */ static swig_type_info _swigt__p_char = {"_p_char", "char *", 0, 0, (void*)0, 0}; static swig_type_info _swigt__p_obexftp_client_t = {"_p_obexftp_client_t", "obexftp_client_t *", 0, 0, (void*)0, 0}; static swig_type_info _swigt__p_obexftp_info_cb_t = {"_p_obexftp_info_cb_t", "obexftp_info_cb_t *", 0, 0, (void*)0, 0}; static swig_type_info *swig_type_initial[] = { &_swigt__p_char, &_swigt__p_obexftp_client_t, &_swigt__p_obexftp_info_cb_t, }; static swig_cast_info _swigc__p_char[] = { {&_swigt__p_char, 0, 0, 0},{0, 0, 0, 0}}; static swig_cast_info _swigc__p_obexftp_client_t[] = { {&_swigt__p_obexftp_client_t, 0, 0, 0},{0, 0, 0, 0}}; static swig_cast_info _swigc__p_obexftp_info_cb_t[] = { {&_swigt__p_obexftp_info_cb_t, 0, 0, 0},{0, 0, 0, 0}}; static swig_cast_info *swig_cast_initial[] = { _swigc__p_char, _swigc__p_obexftp_client_t, _swigc__p_obexftp_info_cb_t, }; /* -------- TYPE CONVERSION AND EQUIVALENCE RULES (END) -------- */ static swig_const_info swig_const_table[] = { {0, 0, 0, 0.0, 0, 0}}; #ifdef __cplusplus } #endif /* ----------------------------------------------------------------------------- * Type initialization: * This problem is tough by the requirement that no dynamic * memory is used. Also, since swig_type_info structures store pointers to * swig_cast_info structures and swig_cast_info structures store pointers back * to swig_type_info structures, we need some lookup code at initialization. * The idea is that swig generates all the structures that are needed. * The runtime then collects these partially filled structures. * The SWIG_InitializeModule function takes these initial arrays out of * swig_module, and does all the lookup, filling in the swig_module.types * array with the correct data and linking the correct swig_cast_info * structures together. * * The generated swig_type_info structures are assigned staticly to an initial * array. We just loop through that array, and handle each type individually. * First we lookup if this type has been already loaded, and if so, use the * loaded structure instead of the generated one. Then we have to fill in the * cast linked list. The cast data is initially stored in something like a * two-dimensional array. Each row corresponds to a type (there are the same * number of rows as there are in the swig_type_initial array). Each entry in * a column is one of the swig_cast_info structures for that type. * The cast_initial array is actually an array of arrays, because each row has * a variable number of columns. So to actually build the cast linked list, * we find the array of casts associated with the type, and loop through it * adding the casts to the list. The one last trick we need to do is making * sure the type pointer in the swig_cast_info struct is correct. * * First off, we lookup the cast->type name to see if it is already loaded. * There are three cases to handle: * 1) If the cast->type has already been loaded AND the type we are adding * casting info to has not been loaded (it is in this module), THEN we * replace the cast->type pointer with the type pointer that has already * been loaded. * 2) If BOTH types (the one we are adding casting info to, and the * cast->type) are loaded, THEN the cast info has already been loaded by * the previous module so we just ignore it. * 3) Finally, if cast->type has not already been loaded, then we add that * swig_cast_info to the linked list (because the cast->type) pointer will * be correct. * ----------------------------------------------------------------------------- */ #ifdef __cplusplus extern "C" { #if 0 } /* c-mode */ #endif #endif #if 0 #define SWIGRUNTIME_DEBUG #endif SWIGRUNTIME void SWIG_InitializeModule(void *clientdata) { size_t i; swig_module_info *module_head, *iter; int found; clientdata = clientdata; /* check to see if the circular list has been setup, if not, set it up */ if (swig_module.next==0) { /* Initialize the swig_module */ swig_module.type_initial = swig_type_initial; swig_module.cast_initial = swig_cast_initial; swig_module.next = &swig_module; } /* Try and load any already created modules */ module_head = SWIG_GetModule(clientdata); if (!module_head) { /* This is the first module loaded for this interpreter */ /* so set the swig module into the interpreter */ SWIG_SetModule(clientdata, &swig_module); module_head = &swig_module; } else { /* the interpreter has loaded a SWIG module, but has it loaded this one? */ found=0; iter=module_head; do { if (iter==&swig_module) { found=1; break; } iter=iter->next; } while (iter!= module_head); /* if the is found in the list, then all is done and we may leave */ if (found) return; /* otherwise we must add out module into the list */ swig_module.next = module_head->next; module_head->next = &swig_module; } /* Now work on filling in swig_module.types */ #ifdef SWIGRUNTIME_DEBUG printf("SWIG_InitializeModule: size %d\n", swig_module.size); #endif for (i = 0; i < swig_module.size; ++i) { swig_type_info *type = 0; swig_type_info *ret; swig_cast_info *cast; #ifdef SWIGRUNTIME_DEBUG printf("SWIG_InitializeModule: type %d %s\n", i, swig_module.type_initial[i]->name); #endif /* if there is another module already loaded */ if (swig_module.next != &swig_module) { type = SWIG_MangledTypeQueryModule(swig_module.next, &swig_module, swig_module.type_initial[i]->name); } if (type) { /* Overwrite clientdata field */ #ifdef SWIGRUNTIME_DEBUG printf("SWIG_InitializeModule: found type %s\n", type->name); #endif if (swig_module.type_initial[i]->clientdata) { type->clientdata = swig_module.type_initial[i]->clientdata; #ifdef SWIGRUNTIME_DEBUG printf("SWIG_InitializeModule: found and overwrite type %s \n", type->name); #endif } } else { type = swig_module.type_initial[i]; } /* Insert casting types */ cast = swig_module.cast_initial[i]; while (cast->type) { /* Don't need to add information already in the list */ ret = 0; #ifdef SWIGRUNTIME_DEBUG printf("SWIG_InitializeModule: look cast %s\n", cast->type->name); #endif if (swig_module.next != &swig_module) { ret = SWIG_MangledTypeQueryModule(swig_module.next, &swig_module, cast->type->name); #ifdef SWIGRUNTIME_DEBUG if (ret) printf("SWIG_InitializeModule: found cast %s\n", ret->name); #endif } if (ret) { if (type == swig_module.type_initial[i]) { #ifdef SWIGRUNTIME_DEBUG printf("SWIG_InitializeModule: skip old type %s\n", ret->name); #endif cast->type = ret; ret = 0; } else { /* Check for casting already in the list */ swig_cast_info *ocast = SWIG_TypeCheck(ret->name, type); #ifdef SWIGRUNTIME_DEBUG if (ocast) printf("SWIG_InitializeModule: skip old cast %s\n", ret->name); #endif if (!ocast) ret = 0; } } if (!ret) { #ifdef SWIGRUNTIME_DEBUG printf("SWIG_InitializeModule: adding cast %s\n", cast->type->name); #endif if (type->cast) { type->cast->prev = cast; cast->next = type->cast; } type->cast = cast; } cast++; } /* Set entry in modules->types array equal to the type */ swig_module.types[i] = type; } swig_module.types[i] = 0; #ifdef SWIGRUNTIME_DEBUG printf("**** SWIG_InitializeModule: Cast List ******\n"); for (i = 0; i < swig_module.size; ++i) { int j = 0; swig_cast_info *cast = swig_module.cast_initial[i]; printf("SWIG_InitializeModule: type %d %s\n", i, swig_module.type_initial[i]->name); while (cast->type) { printf("SWIG_InitializeModule: cast type %s\n", cast->type->name); cast++; ++j; } printf("---- Total casts: %d\n",j); } printf("**** SWIG_InitializeModule: Cast List ******\n"); #endif } /* This function will propagate the clientdata field of type to * any new swig_type_info structures that have been added into the list * of equivalent types. It is like calling * SWIG_TypeClientData(type, clientdata) a second time. */ SWIGRUNTIME void SWIG_PropagateClientData(void) { size_t i; swig_cast_info *equiv; static int init_run = 0; if (init_run) return; init_run = 1; for (i = 0; i < swig_module.size; i++) { if (swig_module.types[i]->clientdata) { equiv = swig_module.types[i]->cast; while (equiv) { if (!equiv->converter) { if (equiv->type && !equiv->type->clientdata) SWIG_TypeClientData(equiv->type, swig_module.types[i]->clientdata); } equiv = equiv->next; } } } } #ifdef __cplusplus #if 0 { /* c-mode */ #endif } #endif #ifdef __cplusplus extern "C" { #endif /* Python-specific SWIG API */ #define SWIG_newvarlink() SWIG_Python_newvarlink() #define SWIG_addvarlink(p, name, get_attr, set_attr) SWIG_Python_addvarlink(p, name, get_attr, set_attr) #define SWIG_InstallConstants(d, constants) SWIG_Python_InstallConstants(d, constants) /* ----------------------------------------------------------------------------- * global variable support code. * ----------------------------------------------------------------------------- */ typedef struct swig_globalvar { char *name; /* Name of global variable */ PyObject *(*get_attr)(void); /* Return the current value */ int (*set_attr)(PyObject *); /* Set the value */ struct swig_globalvar *next; } swig_globalvar; typedef struct swig_varlinkobject { PyObject_HEAD swig_globalvar *vars; } swig_varlinkobject; SWIGINTERN PyObject * swig_varlink_repr(swig_varlinkobject *SWIGUNUSEDPARM(v)) { return PyString_FromString(""); } SWIGINTERN PyObject * swig_varlink_str(swig_varlinkobject *v) { PyObject *str = PyString_FromString("("); swig_globalvar *var; for (var = v->vars; var; var=var->next) { PyString_ConcatAndDel(&str,PyString_FromString(var->name)); if (var->next) PyString_ConcatAndDel(&str,PyString_FromString(", ")); } PyString_ConcatAndDel(&str,PyString_FromString(")")); return str; } SWIGINTERN int swig_varlink_print(swig_varlinkobject *v, FILE *fp, int SWIGUNUSEDPARM(flags)) { PyObject *str = swig_varlink_str(v); fprintf(fp,"Swig global variables "); fprintf(fp,"%s\n", PyString_AsString(str)); Py_DECREF(str); return 0; } SWIGINTERN void swig_varlink_dealloc(swig_varlinkobject *v) { swig_globalvar *var = v->vars; while (var) { swig_globalvar *n = var->next; free(var->name); free(var); var = n; } } SWIGINTERN PyObject * swig_varlink_getattr(swig_varlinkobject *v, char *n) { PyObject *res = NULL; swig_globalvar *var = v->vars; while (var) { if (strcmp(var->name,n) == 0) { res = (*var->get_attr)(); break; } var = var->next; } if (res == NULL && !PyErr_Occurred()) { PyErr_SetString(PyExc_NameError,"Unknown C global variable"); } return res; } SWIGINTERN int swig_varlink_setattr(swig_varlinkobject *v, char *n, PyObject *p) { int res = 1; swig_globalvar *var = v->vars; while (var) { if (strcmp(var->name,n) == 0) { res = (*var->set_attr)(p); break; } var = var->next; } if (res == 1 && !PyErr_Occurred()) { PyErr_SetString(PyExc_NameError,"Unknown C global variable"); } return res; } SWIGINTERN PyTypeObject* swig_varlink_type(void) { static char varlink__doc__[] = "Swig var link object"; static PyTypeObject varlink_type; static int type_init = 0; if (!type_init) { const PyTypeObject tmp = { PyObject_HEAD_INIT(NULL) 0, /* Number of items in variable part (ob_size) */ (char *)"swigvarlink", /* Type name (tp_name) */ sizeof(swig_varlinkobject), /* Basic size (tp_basicsize) */ 0, /* Itemsize (tp_itemsize) */ (destructor) swig_varlink_dealloc, /* Deallocator (tp_dealloc) */ (printfunc) swig_varlink_print, /* Print (tp_print) */ (getattrfunc) swig_varlink_getattr, /* get attr (tp_getattr) */ (setattrfunc) swig_varlink_setattr, /* Set attr (tp_setattr) */ 0, /* tp_compare */ (reprfunc) swig_varlink_repr, /* tp_repr */ 0, /* tp_as_number */ 0, /* tp_as_sequence */ 0, /* tp_as_mapping */ 0, /* tp_hash */ 0, /* tp_call */ (reprfunc)swig_varlink_str, /* tp_str */ 0, /* tp_getattro */ 0, /* tp_setattro */ 0, /* tp_as_buffer */ 0, /* tp_flags */ varlink__doc__, /* tp_doc */ 0, /* tp_traverse */ 0, /* tp_clear */ 0, /* tp_richcompare */ 0, /* tp_weaklistoffset */ #if PY_VERSION_HEX >= 0x02020000 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, /* tp_iter -> tp_weaklist */ #endif #if PY_VERSION_HEX >= 0x02030000 0, /* tp_del */ #endif #ifdef COUNT_ALLOCS 0,0,0,0 /* tp_alloc -> tp_next */ #endif }; varlink_type = tmp; varlink_type.ob_type = &PyType_Type; type_init = 1; } return &varlink_type; } /* Create a variable linking object for use later */ SWIGINTERN PyObject * SWIG_Python_newvarlink(void) { swig_varlinkobject *result = PyObject_NEW(swig_varlinkobject, swig_varlink_type()); if (result) { result->vars = 0; } return ((PyObject*) result); } SWIGINTERN void SWIG_Python_addvarlink(PyObject *p, char *name, PyObject *(*get_attr)(void), int (*set_attr)(PyObject *p)) { swig_varlinkobject *v = (swig_varlinkobject *) p; swig_globalvar *gv = (swig_globalvar *) malloc(sizeof(swig_globalvar)); if (gv) { size_t size = strlen(name)+1; gv->name = (char *)malloc(size); if (gv->name) { strncpy(gv->name,name,size); gv->get_attr = get_attr; gv->set_attr = set_attr; gv->next = v->vars; } } v->vars = gv; } SWIGINTERN PyObject * SWIG_globals(void) { static PyObject *_SWIG_globals = 0; if (!_SWIG_globals) _SWIG_globals = SWIG_newvarlink(); return _SWIG_globals; } /* ----------------------------------------------------------------------------- * constants/methods manipulation * ----------------------------------------------------------------------------- */ /* Install Constants */ SWIGINTERN void SWIG_Python_InstallConstants(PyObject *d, swig_const_info constants[]) { PyObject *obj = 0; size_t i; for (i = 0; constants[i].type; ++i) { switch(constants[i].type) { case SWIG_PY_POINTER: obj = SWIG_NewPointerObj(constants[i].pvalue, *(constants[i]).ptype,0); break; case SWIG_PY_BINARY: obj = SWIG_NewPackedObj(constants[i].pvalue, constants[i].lvalue, *(constants[i].ptype)); break; default: obj = 0; break; } if (obj) { PyDict_SetItemString(d, constants[i].name, obj); Py_DECREF(obj); } } } /* -----------------------------------------------------------------------------*/ /* Fix SwigMethods to carry the callback ptrs when needed */ /* -----------------------------------------------------------------------------*/ SWIGINTERN void SWIG_Python_FixMethods(PyMethodDef *methods, swig_const_info *const_table, swig_type_info **types, swig_type_info **types_initial) { size_t i; for (i = 0; methods[i].ml_name; ++i) { const char *c = methods[i].ml_doc; if (c && (c = strstr(c, "swig_ptr: "))) { int j; swig_const_info *ci = 0; const char *name = c + 10; for (j = 0; const_table[j].type; ++j) { if (strncmp(const_table[j].name, name, strlen(const_table[j].name)) == 0) { ci = &(const_table[j]); break; } } if (ci) { size_t shift = (ci->ptype) - types; swig_type_info *ty = types_initial[shift]; size_t ldoc = (c - methods[i].ml_doc); size_t lptr = strlen(ty->name)+2*sizeof(void*)+2; char *ndoc = (char*)malloc(ldoc + lptr + 10); if (ndoc) { char *buff = ndoc; void *ptr = (ci->type == SWIG_PY_POINTER) ? ci->pvalue : 0; if (ptr) { strncpy(buff, methods[i].ml_doc, ldoc); buff += ldoc; strncpy(buff, "swig_ptr: ", 10); buff += 10; SWIG_PackVoidPtr(buff, ptr, ty->name, lptr); methods[i].ml_doc = ndoc; } } } } } } #ifdef __cplusplus } #endif /* -----------------------------------------------------------------------------* * Partial Init method * -----------------------------------------------------------------------------*/ #ifdef __cplusplus extern "C" #endif SWIGEXPORT void SWIG_init(void) { PyObject *m, *d; /* Fix SwigMethods to carry the callback ptrs when needed */ SWIG_Python_FixMethods(SwigMethods, swig_const_table, swig_types, swig_type_initial); m = Py_InitModule((char *) SWIG_name, SwigMethods); d = PyModule_GetDict(m); SWIG_InitializeModule(0); SWIG_InstallConstants(d,swig_const_table); SWIG_Python_SetConstant(d, "IRDA",SWIG_From_int((int)(OBEX_TRANS_IRDA))); SWIG_Python_SetConstant(d, "INET",SWIG_From_int((int)(OBEX_TRANS_INET))); SWIG_Python_SetConstant(d, "CABLE",SWIG_From_int((int)(OBEX_TRANS_CUSTOM))); SWIG_Python_SetConstant(d, "BLUETOOTH",SWIG_From_int((int)(OBEX_TRANS_BLUETOOTH))); SWIG_Python_SetConstant(d, "USB",SWIG_From_int((int)(OBEX_TRANS_USB))); SWIG_Python_SetConstant(d, "SYNC",SWIG_From_int((int)(OBEX_SYNC_SERVICE))); SWIG_Python_SetConstant(d, "PUSH",SWIG_From_int((int)(OBEX_PUSH_SERVICE))); SWIG_Python_SetConstant(d, "FTP",SWIG_From_int((int)(OBEX_FTP_SERVICE))); } obexftp-0.23/swig/python/Makefile.in0000644000076600000240000002536611146600665014405 00000000000000# Makefile.in generated by automake 1.9.6 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = ../.. am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = swig/python DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ $(srcdir)/setup.py.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/iconv.m4 \ $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/acinclude.m4 \ $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = setup.py SOURCES = DIST_SOURCES = DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ BFB_VERSION = @BFB_VERSION@ BLUETOOTH_CFLAGS = @BLUETOOTH_CFLAGS@ BLUETOOTH_LIBS = @BLUETOOTH_LIBS@ BUILD_DOCS_FALSE = @BUILD_DOCS_FALSE@ BUILD_DOCS_TRUE = @BUILD_DOCS_TRUE@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DSYMUTIL = @DSYMUTIL@ ECHO = @ECHO@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ ENABLE_PERL_FALSE = @ENABLE_PERL_FALSE@ ENABLE_PERL_TRUE = @ENABLE_PERL_TRUE@ ENABLE_PYTHON_FALSE = @ENABLE_PYTHON_FALSE@ ENABLE_PYTHON_TRUE = @ENABLE_PYTHON_TRUE@ ENABLE_RUBY_FALSE = @ENABLE_RUBY_FALSE@ ENABLE_RUBY_TRUE = @ENABLE_RUBY_TRUE@ ENABLE_SWIG_FALSE = @ENABLE_SWIG_FALSE@ ENABLE_SWIG_TRUE = @ENABLE_SWIG_TRUE@ ENABLE_TCL_FALSE = @ENABLE_TCL_FALSE@ ENABLE_TCL_TRUE = @ENABLE_TCL_TRUE@ EXEEXT = @EXEEXT@ EXTRA_LIBS = @EXTRA_LIBS@ F77 = @F77@ FFLAGS = @FFLAGS@ GREP = @GREP@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LDFLAGS = @LDFLAGS@ LIBICONV = @LIBICONV@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LN_S = @LN_S@ LTLIBICONV = @LTLIBICONV@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MULTICOBEX_VERSION = @MULTICOBEX_VERSION@ NMEDIT = @NMEDIT@ OBEXFTP_VERSION = @OBEXFTP_VERSION@ OBJEXT = @OBJEXT@ OPENOBEX_CFLAGS = @OPENOBEX_CFLAGS@ OPENOBEX_LIBS = @OPENOBEX_LIBS@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ PKG_CONFIG = @PKG_CONFIG@ PYTHON = @PYTHON@ PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@ PYTHON_PLATFORM = @PYTHON_PLATFORM@ PYTHON_PREFIX = @PYTHON_PREFIX@ PYTHON_VERSION = @PYTHON_VERSION@ RANLIB = @RANLIB@ REQUIRES = @REQUIRES@ RUBY = @RUBY@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ SWIG = @SWIG@ SWIG_LIB = @SWIG_LIB@ TCLSH = @TCLSH@ VERSION = @VERSION@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_F77 = @ac_ct_F77@ ac_perl_enabled = @ac_perl_enabled@ ac_python_enabled = @ac_python_enabled@ ac_ruby_enabled = @ac_ruby_enabled@ ac_tcl_enabled = @ac_tcl_enabled@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ pkgpyexecdir = @pkgpyexecdir@ pkgpythondir = @pkgpythondir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ pyexecdir = @pyexecdir@ pythondir = @pythondir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ EXTRA_DIST = python_wrap.c __init__.py @ENABLE_SWIG_TRUE@MOSTLYCLEANFILES = python_wrap.c __init__.py all: all-am .SUFFIXES: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu swig/python/Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --gnu swig/python/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh setup.py: $(top_builddir)/config.status $(srcdir)/setup.py.in cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool uninstall-info-am: tags: TAGS TAGS: ctags: CTAGS CTAGS: distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ list='$(DISTFILES)'; for file in $$list; do \ case $$file in \ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ esac; \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ dir="/$$dir"; \ $(mkdir_p) "$(distdir)$$dir"; \ else \ dir=''; \ fi; \ if test -d $$d/$$file; then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile all-local installdirs: install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES) clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libtool clean-local mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic distclean-libtool dvi: dvi-am dvi-am: html: html-am info: info-am info-am: install-data-am: install-data-local install-exec-am: install-info: install-info-am install-man: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-info-am .PHONY: all all-am all-local check check-am clean clean-generic \ clean-libtool clean-local distclean distclean-generic \ distclean-libtool distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am \ install-data-local install-exec install-exec-am install-info \ install-info-am install-man install-strip installcheck \ installcheck-am installdirs maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-generic \ mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \ uninstall-info-am @ENABLE_SWIG_TRUE@python_wrap.c: $(srcdir)/../client.i $(srcdir)/../charmap.i @ENABLE_SWIG_TRUE@ $(SWIG) -python -module obexftp -I$(top_srcdir) -o $@ $(srcdir)/../client.i @ENABLE_SWIG_TRUE@ mv obexftp.py __init__.py all-local: python_wrap.c setup.py if test ! -f python_wrap.c; then cp $(srcdir)/python_wrap.c . ; fi $(PYTHON) setup.py build install-data-local: $(PYTHON) setup.py install --root="/$(DESTDIR)" --prefix="$(prefix)" clean-local: if test -x "$(PYTHON)"; then $(PYTHON) setup.py clean; fi rm -rf build if test $(top_srcdir) != $(top_builddir) ; then rm -f python_wrap.c ; fi # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: obexftp-0.23/swig/python/setup.py.in0000644000076600000240000000162611146600644014445 00000000000000from distutils.core import setup, Extension import string setup(name = 'obexftp', version = '@VERSION@', author = 'Christian Zuckschwerdt', author_email = 'zany@triq.net', url = 'http://www.openobex.org/', description = 'ObexFTP python bindings', download_url = 'http://triq.net/obexftp/', package_dir = {'obexftp': '@srcdir@'}, packages = [ 'obexftp' ], ext_package = 'obexftp', ext_modules = [Extension('_obexftp', ['python_wrap.c'], include_dirs=['@top_srcdir@'], extra_link_args = string.split('-L@top_builddir@/obexftp/.libs -lobexftp -L@top_builddir@/multicobex/.libs -lmulticobex -L@top_builddir@/bfb/.libs -lbfb @OPENOBEX_LIBS@'), # static: extra_link_args = string.split('@top_builddir@/obexftp/.libs/libobexftp.a @top_builddir@/multicobex/.libs/libmulticobex.a @top_builddir@/bfb/.libs/libbfb.a @OPENOBEX_LIBS@'), )], ) obexftp-0.23/swig/python/__init__.py0000644000076600000240000000657011146601117014436 00000000000000# This file was automatically generated by SWIG (http://www.swig.org). # Version 1.3.33 # # Don't modify this file, modify the SWIG interface instead. # This file is compatible with both classic and new-style classes. import _obexftp import new new_instancemethod = new.instancemethod try: _swig_property = property except NameError: pass # Python < 2.2 doesn't have 'property'. def _swig_setattr_nondynamic(self,class_type,name,value,static=1): if (name == "thisown"): return self.this.own(value) if (name == "this"): if type(value).__name__ == 'PySwigObject': self.__dict__[name] = value return method = class_type.__swig_setmethods__.get(name,None) if method: return method(self,value) if (not static) or hasattr(self,name): self.__dict__[name] = value else: raise AttributeError("You cannot add attributes to %s" % self) def _swig_setattr(self,class_type,name,value): return _swig_setattr_nondynamic(self,class_type,name,value,0) def _swig_getattr(self,class_type,name): if (name == "thisown"): return self.this.own() method = class_type.__swig_getmethods__.get(name,None) if method: return method(self) raise AttributeError,name def _swig_repr(self): try: strthis = "proxy of " + self.this.__repr__() except: strthis = "" return "<%s.%s; %s >" % (self.__class__.__module__, self.__class__.__name__, strthis,) import types try: _object = types.ObjectType _newclass = 1 except AttributeError: class _object : pass _newclass = 0 del types IRDA = _obexftp.IRDA INET = _obexftp.INET CABLE = _obexftp.CABLE BLUETOOTH = _obexftp.BLUETOOTH USB = _obexftp.USB SYNC = _obexftp.SYNC PUSH = _obexftp.PUSH FTP = _obexftp.FTP discover = _obexftp.discover browsebt = _obexftp.browsebt class client(_object): __swig_setmethods__ = {} __setattr__ = lambda self, name, value: _swig_setattr(self, client, name, value) __swig_getmethods__ = {} __getattr__ = lambda self, name: _swig_getattr(self, client, name) __repr__ = _swig_repr def __init__(self, *args): this = _obexftp.new_client(*args) try: self.this.append(this) except: self.this = this __swig_destroy__ = _obexftp.delete_client __del__ = lambda self : None; def callback(*args): return _obexftp.client_callback(*args) def discover(*args): return _obexftp.client_discover(*args) def connect(*args): return _obexftp.client_connect(*args) def connectpush(*args): return _obexftp.client_connectpush(*args) def connectsync(*args): return _obexftp.client_connectsync(*args) def disconnect(*args): return _obexftp.client_disconnect(*args) def chpath(*args): return _obexftp.client_chpath(*args) def mkpath(*args): return _obexftp.client_mkpath(*args) def cdup(*args): return _obexftp.client_cdup(*args) def cdtop(*args): return _obexftp.client_cdtop(*args) def get(*args): return _obexftp.client_get(*args) def list(*args): return _obexftp.client_list(*args) def get_capability(*args): return _obexftp.client_get_capability(*args) def get_file(*args): return _obexftp.client_get_file(*args) def put_file(*args): return _obexftp.client_put_file(*args) def put_data(*args): return _obexftp.client_put_data(*args) def delete(*args): return _obexftp.client_delete(*args) client_swigregister = _obexftp.client_swigregister client_swigregister(client) obexftp-0.23/swig/python/Makefile.am0000644000076600000240000000121211146600644014351 00000000000000EXTRA_DIST = python_wrap.c __init__.py if ENABLE_SWIG python_wrap.c: $(srcdir)/../client.i $(srcdir)/../charmap.i $(SWIG) -python -module obexftp -I$(top_srcdir) -o $@ $(srcdir)/../client.i mv obexftp.py __init__.py MOSTLYCLEANFILES=python_wrap.c __init__.py endif all-local: python_wrap.c setup.py if test ! -f python_wrap.c; then cp $(srcdir)/python_wrap.c . ; fi $(PYTHON) setup.py build install-data-local: $(PYTHON) setup.py install --root="/$(DESTDIR)" --prefix="$(prefix)" clean-local: if test -x "$(PYTHON)"; then $(PYTHON) setup.py clean; fi rm -rf build if test $(top_srcdir) != $(top_builddir) ; then rm -f python_wrap.c ; fi obexftp-0.23/swig/ruby/0000777000076600000240000000000011146603264012046 500000000000000obexftp-0.23/swig/ruby/ruby_wrap.c0000644000076600000240000025376011146601120014142 00000000000000/* ---------------------------------------------------------------------------- * This file was automatically generated by SWIG (http://www.swig.org). * Version 1.3.33 * * This file is not intended to be easily readable and contains a number of * coding conventions designed to improve portability and efficiency. Do not make * changes to this file unless you know what you are doing--modify the SWIG * interface file instead. * ----------------------------------------------------------------------------- */ #define SWIGRUBY /* ----------------------------------------------------------------------------- * This section contains generic SWIG labels for method/variable * declarations/attributes, and other compiler dependent labels. * ----------------------------------------------------------------------------- */ /* template workaround for compilers that cannot correctly implement the C++ standard */ #ifndef SWIGTEMPLATEDISAMBIGUATOR # if defined(__SUNPRO_CC) && (__SUNPRO_CC <= 0x560) # define SWIGTEMPLATEDISAMBIGUATOR template # elif defined(__HP_aCC) /* Needed even with `aCC -AA' when `aCC -V' reports HP ANSI C++ B3910B A.03.55 */ /* If we find a maximum version that requires this, the test would be __HP_aCC <= 35500 for A.03.55 */ # define SWIGTEMPLATEDISAMBIGUATOR template # else # define SWIGTEMPLATEDISAMBIGUATOR # endif #endif /* inline attribute */ #ifndef SWIGINLINE # if defined(__cplusplus) || (defined(__GNUC__) && !defined(__STRICT_ANSI__)) # define SWIGINLINE inline # else # define SWIGINLINE # endif #endif /* attribute recognised by some compilers to avoid 'unused' warnings */ #ifndef SWIGUNUSED # if defined(__GNUC__) # if !(defined(__cplusplus)) || (__GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 4)) # define SWIGUNUSED __attribute__ ((__unused__)) # else # define SWIGUNUSED # endif # elif defined(__ICC) # define SWIGUNUSED __attribute__ ((__unused__)) # else # define SWIGUNUSED # endif #endif #ifndef SWIGUNUSEDPARM # ifdef __cplusplus # define SWIGUNUSEDPARM(p) # else # define SWIGUNUSEDPARM(p) p SWIGUNUSED # endif #endif /* internal SWIG method */ #ifndef SWIGINTERN # define SWIGINTERN static SWIGUNUSED #endif /* internal inline SWIG method */ #ifndef SWIGINTERNINLINE # define SWIGINTERNINLINE SWIGINTERN SWIGINLINE #endif /* exporting methods */ #if (__GNUC__ >= 4) || (__GNUC__ == 3 && __GNUC_MINOR__ >= 4) # ifndef GCC_HASCLASSVISIBILITY # define GCC_HASCLASSVISIBILITY # endif #endif #ifndef SWIGEXPORT # if defined(_WIN32) || defined(__WIN32__) || defined(__CYGWIN__) # if defined(STATIC_LINKED) # define SWIGEXPORT # else # define SWIGEXPORT __declspec(dllexport) # endif # else # if defined(__GNUC__) && defined(GCC_HASCLASSVISIBILITY) # define SWIGEXPORT __attribute__ ((visibility("default"))) # else # define SWIGEXPORT # endif # endif #endif /* calling conventions for Windows */ #ifndef SWIGSTDCALL # if defined(_WIN32) || defined(__WIN32__) || defined(__CYGWIN__) # define SWIGSTDCALL __stdcall # else # define SWIGSTDCALL # endif #endif /* Deal with Microsoft's attempt at deprecating C standard runtime functions */ #if !defined(SWIG_NO_CRT_SECURE_NO_DEPRECATE) && defined(_MSC_VER) && !defined(_CRT_SECURE_NO_DEPRECATE) # define _CRT_SECURE_NO_DEPRECATE #endif /* Deal with Microsoft's attempt at deprecating methods in the standard C++ library */ #if !defined(SWIG_NO_SCL_SECURE_NO_DEPRECATE) && defined(_MSC_VER) && !defined(_SCL_SECURE_NO_DEPRECATE) # define _SCL_SECURE_NO_DEPRECATE #endif /* ----------------------------------------------------------------------------- * This section contains generic SWIG labels for method/variable * declarations/attributes, and other compiler dependent labels. * ----------------------------------------------------------------------------- */ /* template workaround for compilers that cannot correctly implement the C++ standard */ #ifndef SWIGTEMPLATEDISAMBIGUATOR # if defined(__SUNPRO_CC) && (__SUNPRO_CC <= 0x560) # define SWIGTEMPLATEDISAMBIGUATOR template # elif defined(__HP_aCC) /* Needed even with `aCC -AA' when `aCC -V' reports HP ANSI C++ B3910B A.03.55 */ /* If we find a maximum version that requires this, the test would be __HP_aCC <= 35500 for A.03.55 */ # define SWIGTEMPLATEDISAMBIGUATOR template # else # define SWIGTEMPLATEDISAMBIGUATOR # endif #endif /* inline attribute */ #ifndef SWIGINLINE # if defined(__cplusplus) || (defined(__GNUC__) && !defined(__STRICT_ANSI__)) # define SWIGINLINE inline # else # define SWIGINLINE # endif #endif /* attribute recognised by some compilers to avoid 'unused' warnings */ #ifndef SWIGUNUSED # if defined(__GNUC__) # if !(defined(__cplusplus)) || (__GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 4)) # define SWIGUNUSED __attribute__ ((__unused__)) # else # define SWIGUNUSED # endif # elif defined(__ICC) # define SWIGUNUSED __attribute__ ((__unused__)) # else # define SWIGUNUSED # endif #endif #ifndef SWIGUNUSEDPARM # ifdef __cplusplus # define SWIGUNUSEDPARM(p) # else # define SWIGUNUSEDPARM(p) p SWIGUNUSED # endif #endif /* internal SWIG method */ #ifndef SWIGINTERN # define SWIGINTERN static SWIGUNUSED #endif /* internal inline SWIG method */ #ifndef SWIGINTERNINLINE # define SWIGINTERNINLINE SWIGINTERN SWIGINLINE #endif /* exporting methods */ #if (__GNUC__ >= 4) || (__GNUC__ == 3 && __GNUC_MINOR__ >= 4) # ifndef GCC_HASCLASSVISIBILITY # define GCC_HASCLASSVISIBILITY # endif #endif #ifndef SWIGEXPORT # if defined(_WIN32) || defined(__WIN32__) || defined(__CYGWIN__) # if defined(STATIC_LINKED) # define SWIGEXPORT # else # define SWIGEXPORT __declspec(dllexport) # endif # else # if defined(__GNUC__) && defined(GCC_HASCLASSVISIBILITY) # define SWIGEXPORT __attribute__ ((visibility("default"))) # else # define SWIGEXPORT # endif # endif #endif /* calling conventions for Windows */ #ifndef SWIGSTDCALL # if defined(_WIN32) || defined(__WIN32__) || defined(__CYGWIN__) # define SWIGSTDCALL __stdcall # else # define SWIGSTDCALL # endif #endif /* Deal with Microsoft's attempt at deprecating C standard runtime functions */ #if !defined(SWIG_NO_CRT_SECURE_NO_DEPRECATE) && defined(_MSC_VER) && !defined(_CRT_SECURE_NO_DEPRECATE) # define _CRT_SECURE_NO_DEPRECATE #endif /* Deal with Microsoft's attempt at deprecating methods in the standard C++ library */ #if !defined(SWIG_NO_SCL_SECURE_NO_DEPRECATE) && defined(_MSC_VER) && !defined(_SCL_SECURE_NO_DEPRECATE) # define _SCL_SECURE_NO_DEPRECATE #endif /* ----------------------------------------------------------------------------- * swigrun.swg * * This file contains generic CAPI SWIG runtime support for pointer * type checking. * ----------------------------------------------------------------------------- */ /* This should only be incremented when either the layout of swig_type_info changes, or for whatever reason, the runtime changes incompatibly */ #define SWIG_RUNTIME_VERSION "3" /* define SWIG_TYPE_TABLE_NAME as "SWIG_TYPE_TABLE" */ #ifdef SWIG_TYPE_TABLE # define SWIG_QUOTE_STRING(x) #x # define SWIG_EXPAND_AND_QUOTE_STRING(x) SWIG_QUOTE_STRING(x) # define SWIG_TYPE_TABLE_NAME SWIG_EXPAND_AND_QUOTE_STRING(SWIG_TYPE_TABLE) #else # define SWIG_TYPE_TABLE_NAME #endif /* You can use the SWIGRUNTIME and SWIGRUNTIMEINLINE macros for creating a static or dynamic library from the swig runtime code. In 99.9% of the cases, swig just needs to declare them as 'static'. But only do this if is strictly necessary, ie, if you have problems with your compiler or so. */ #ifndef SWIGRUNTIME # define SWIGRUNTIME SWIGINTERN #endif #ifndef SWIGRUNTIMEINLINE # define SWIGRUNTIMEINLINE SWIGRUNTIME SWIGINLINE #endif /* Generic buffer size */ #ifndef SWIG_BUFFER_SIZE # define SWIG_BUFFER_SIZE 1024 #endif /* Flags for pointer conversions */ #define SWIG_POINTER_DISOWN 0x1 /* Flags for new pointer objects */ #define SWIG_POINTER_OWN 0x1 /* Flags/methods for returning states. The swig conversion methods, as ConvertPtr, return and integer that tells if the conversion was successful or not. And if not, an error code can be returned (see swigerrors.swg for the codes). Use the following macros/flags to set or process the returning states. In old swig versions, you usually write code as: if (SWIG_ConvertPtr(obj,vptr,ty.flags) != -1) { // success code } else { //fail code } Now you can be more explicit as: int res = SWIG_ConvertPtr(obj,vptr,ty.flags); if (SWIG_IsOK(res)) { // success code } else { // fail code } that seems to be the same, but now you can also do Type *ptr; int res = SWIG_ConvertPtr(obj,(void **)(&ptr),ty.flags); if (SWIG_IsOK(res)) { // success code if (SWIG_IsNewObj(res) { ... delete *ptr; } else { ... } } else { // fail code } I.e., now SWIG_ConvertPtr can return new objects and you can identify the case and take care of the deallocation. Of course that requires also to SWIG_ConvertPtr to return new result values, as int SWIG_ConvertPtr(obj, ptr,...) { if () { if () { *ptr = ; return SWIG_NEWOBJ; } else { *ptr = ; return SWIG_OLDOBJ; } } else { return SWIG_BADOBJ; } } Of course, returning the plain '0(success)/-1(fail)' still works, but you can be more explicit by returning SWIG_BADOBJ, SWIG_ERROR or any of the swig errors code. Finally, if the SWIG_CASTRANK_MODE is enabled, the result code allows to return the 'cast rank', for example, if you have this int food(double) int fooi(int); and you call food(1) // cast rank '1' (1 -> 1.0) fooi(1) // cast rank '0' just use the SWIG_AddCast()/SWIG_CheckState() */ #define SWIG_OK (0) #define SWIG_ERROR (-1) #define SWIG_IsOK(r) (r >= 0) #define SWIG_ArgError(r) ((r != SWIG_ERROR) ? r : SWIG_TypeError) /* The CastRankLimit says how many bits are used for the cast rank */ #define SWIG_CASTRANKLIMIT (1 << 8) /* The NewMask denotes the object was created (using new/malloc) */ #define SWIG_NEWOBJMASK (SWIG_CASTRANKLIMIT << 1) /* The TmpMask is for in/out typemaps that use temporal objects */ #define SWIG_TMPOBJMASK (SWIG_NEWOBJMASK << 1) /* Simple returning values */ #define SWIG_BADOBJ (SWIG_ERROR) #define SWIG_OLDOBJ (SWIG_OK) #define SWIG_NEWOBJ (SWIG_OK | SWIG_NEWOBJMASK) #define SWIG_TMPOBJ (SWIG_OK | SWIG_TMPOBJMASK) /* Check, add and del mask methods */ #define SWIG_AddNewMask(r) (SWIG_IsOK(r) ? (r | SWIG_NEWOBJMASK) : r) #define SWIG_DelNewMask(r) (SWIG_IsOK(r) ? (r & ~SWIG_NEWOBJMASK) : r) #define SWIG_IsNewObj(r) (SWIG_IsOK(r) && (r & SWIG_NEWOBJMASK)) #define SWIG_AddTmpMask(r) (SWIG_IsOK(r) ? (r | SWIG_TMPOBJMASK) : r) #define SWIG_DelTmpMask(r) (SWIG_IsOK(r) ? (r & ~SWIG_TMPOBJMASK) : r) #define SWIG_IsTmpObj(r) (SWIG_IsOK(r) && (r & SWIG_TMPOBJMASK)) /* Cast-Rank Mode */ #if defined(SWIG_CASTRANK_MODE) # ifndef SWIG_TypeRank # define SWIG_TypeRank unsigned long # endif # ifndef SWIG_MAXCASTRANK /* Default cast allowed */ # define SWIG_MAXCASTRANK (2) # endif # define SWIG_CASTRANKMASK ((SWIG_CASTRANKLIMIT) -1) # define SWIG_CastRank(r) (r & SWIG_CASTRANKMASK) SWIGINTERNINLINE int SWIG_AddCast(int r) { return SWIG_IsOK(r) ? ((SWIG_CastRank(r) < SWIG_MAXCASTRANK) ? (r + 1) : SWIG_ERROR) : r; } SWIGINTERNINLINE int SWIG_CheckState(int r) { return SWIG_IsOK(r) ? SWIG_CastRank(r) + 1 : 0; } #else /* no cast-rank mode */ # define SWIG_AddCast # define SWIG_CheckState(r) (SWIG_IsOK(r) ? 1 : 0) #endif #include #ifdef __cplusplus extern "C" { #endif typedef void *(*swig_converter_func)(void *); typedef struct swig_type_info *(*swig_dycast_func)(void **); /* Structure to store inforomation on one type */ typedef struct swig_type_info { const char *name; /* mangled name of this type */ const char *str; /* human readable name of this type */ swig_dycast_func dcast; /* dynamic cast function down a hierarchy */ struct swig_cast_info *cast; /* linked list of types that can cast into this type */ void *clientdata; /* language specific type data */ int owndata; /* flag if the structure owns the clientdata */ } swig_type_info; /* Structure to store a type and conversion function used for casting */ typedef struct swig_cast_info { swig_type_info *type; /* pointer to type that is equivalent to this type */ swig_converter_func converter; /* function to cast the void pointers */ struct swig_cast_info *next; /* pointer to next cast in linked list */ struct swig_cast_info *prev; /* pointer to the previous cast */ } swig_cast_info; /* Structure used to store module information * Each module generates one structure like this, and the runtime collects * all of these structures and stores them in a circularly linked list.*/ typedef struct swig_module_info { swig_type_info **types; /* Array of pointers to swig_type_info structures that are in this module */ size_t size; /* Number of types in this module */ struct swig_module_info *next; /* Pointer to next element in circularly linked list */ swig_type_info **type_initial; /* Array of initially generated type structures */ swig_cast_info **cast_initial; /* Array of initially generated casting structures */ void *clientdata; /* Language specific module data */ } swig_module_info; /* Compare two type names skipping the space characters, therefore "char*" == "char *" and "Class" == "Class", etc. Return 0 when the two name types are equivalent, as in strncmp, but skipping ' '. */ SWIGRUNTIME int SWIG_TypeNameComp(const char *f1, const char *l1, const char *f2, const char *l2) { for (;(f1 != l1) && (f2 != l2); ++f1, ++f2) { while ((*f1 == ' ') && (f1 != l1)) ++f1; while ((*f2 == ' ') && (f2 != l2)) ++f2; if (*f1 != *f2) return (*f1 > *f2) ? 1 : -1; } return (int)((l1 - f1) - (l2 - f2)); } /* Check type equivalence in a name list like ||... Return 0 if not equal, 1 if equal */ SWIGRUNTIME int SWIG_TypeEquiv(const char *nb, const char *tb) { int equiv = 0; const char* te = tb + strlen(tb); const char* ne = nb; while (!equiv && *ne) { for (nb = ne; *ne; ++ne) { if (*ne == '|') break; } equiv = (SWIG_TypeNameComp(nb, ne, tb, te) == 0) ? 1 : 0; if (*ne) ++ne; } return equiv; } /* Check type equivalence in a name list like ||... Return 0 if equal, -1 if nb < tb, 1 if nb > tb */ SWIGRUNTIME int SWIG_TypeCompare(const char *nb, const char *tb) { int equiv = 0; const char* te = tb + strlen(tb); const char* ne = nb; while (!equiv && *ne) { for (nb = ne; *ne; ++ne) { if (*ne == '|') break; } equiv = (SWIG_TypeNameComp(nb, ne, tb, te) == 0) ? 1 : 0; if (*ne) ++ne; } return equiv; } /* think of this as a c++ template<> or a scheme macro */ #define SWIG_TypeCheck_Template(comparison, ty) \ if (ty) { \ swig_cast_info *iter = ty->cast; \ while (iter) { \ if (comparison) { \ if (iter == ty->cast) return iter; \ /* Move iter to the top of the linked list */ \ iter->prev->next = iter->next; \ if (iter->next) \ iter->next->prev = iter->prev; \ iter->next = ty->cast; \ iter->prev = 0; \ if (ty->cast) ty->cast->prev = iter; \ ty->cast = iter; \ return iter; \ } \ iter = iter->next; \ } \ } \ return 0 /* Check the typename */ SWIGRUNTIME swig_cast_info * SWIG_TypeCheck(const char *c, swig_type_info *ty) { SWIG_TypeCheck_Template(strcmp(iter->type->name, c) == 0, ty); } /* Same as previous function, except strcmp is replaced with a pointer comparison */ SWIGRUNTIME swig_cast_info * SWIG_TypeCheckStruct(swig_type_info *from, swig_type_info *into) { SWIG_TypeCheck_Template(iter->type == from, into); } /* Cast a pointer up an inheritance hierarchy */ SWIGRUNTIMEINLINE void * SWIG_TypeCast(swig_cast_info *ty, void *ptr) { return ((!ty) || (!ty->converter)) ? ptr : (*ty->converter)(ptr); } /* Dynamic pointer casting. Down an inheritance hierarchy */ SWIGRUNTIME swig_type_info * SWIG_TypeDynamicCast(swig_type_info *ty, void **ptr) { swig_type_info *lastty = ty; if (!ty || !ty->dcast) return ty; while (ty && (ty->dcast)) { ty = (*ty->dcast)(ptr); if (ty) lastty = ty; } return lastty; } /* Return the name associated with this type */ SWIGRUNTIMEINLINE const char * SWIG_TypeName(const swig_type_info *ty) { return ty->name; } /* Return the pretty name associated with this type, that is an unmangled type name in a form presentable to the user. */ SWIGRUNTIME const char * SWIG_TypePrettyName(const swig_type_info *type) { /* The "str" field contains the equivalent pretty names of the type, separated by vertical-bar characters. We choose to print the last name, as it is often (?) the most specific. */ if (!type) return NULL; if (type->str != NULL) { const char *last_name = type->str; const char *s; for (s = type->str; *s; s++) if (*s == '|') last_name = s+1; return last_name; } else return type->name; } /* Set the clientdata field for a type */ SWIGRUNTIME void SWIG_TypeClientData(swig_type_info *ti, void *clientdata) { swig_cast_info *cast = ti->cast; /* if (ti->clientdata == clientdata) return; */ ti->clientdata = clientdata; while (cast) { if (!cast->converter) { swig_type_info *tc = cast->type; if (!tc->clientdata) { SWIG_TypeClientData(tc, clientdata); } } cast = cast->next; } } SWIGRUNTIME void SWIG_TypeNewClientData(swig_type_info *ti, void *clientdata) { SWIG_TypeClientData(ti, clientdata); ti->owndata = 1; } /* Search for a swig_type_info structure only by mangled name Search is a O(log #types) We start searching at module start, and finish searching when start == end. Note: if start == end at the beginning of the function, we go all the way around the circular list. */ SWIGRUNTIME swig_type_info * SWIG_MangledTypeQueryModule(swig_module_info *start, swig_module_info *end, const char *name) { swig_module_info *iter = start; do { if (iter->size) { register size_t l = 0; register size_t r = iter->size - 1; do { /* since l+r >= 0, we can (>> 1) instead (/ 2) */ register size_t i = (l + r) >> 1; const char *iname = iter->types[i]->name; if (iname) { register int compare = strcmp(name, iname); if (compare == 0) { return iter->types[i]; } else if (compare < 0) { if (i) { r = i - 1; } else { break; } } else if (compare > 0) { l = i + 1; } } else { break; /* should never happen */ } } while (l <= r); } iter = iter->next; } while (iter != end); return 0; } /* Search for a swig_type_info structure for either a mangled name or a human readable name. It first searches the mangled names of the types, which is a O(log #types) If a type is not found it then searches the human readable names, which is O(#types). We start searching at module start, and finish searching when start == end. Note: if start == end at the beginning of the function, we go all the way around the circular list. */ SWIGRUNTIME swig_type_info * SWIG_TypeQueryModule(swig_module_info *start, swig_module_info *end, const char *name) { /* STEP 1: Search the name field using binary search */ swig_type_info *ret = SWIG_MangledTypeQueryModule(start, end, name); if (ret) { return ret; } else { /* STEP 2: If the type hasn't been found, do a complete search of the str field (the human readable name) */ swig_module_info *iter = start; do { register size_t i = 0; for (; i < iter->size; ++i) { if (iter->types[i]->str && (SWIG_TypeEquiv(iter->types[i]->str, name))) return iter->types[i]; } iter = iter->next; } while (iter != end); } /* neither found a match */ return 0; } /* Pack binary data into a string */ SWIGRUNTIME char * SWIG_PackData(char *c, void *ptr, size_t sz) { static const char hex[17] = "0123456789abcdef"; register const unsigned char *u = (unsigned char *) ptr; register const unsigned char *eu = u + sz; for (; u != eu; ++u) { register unsigned char uu = *u; *(c++) = hex[(uu & 0xf0) >> 4]; *(c++) = hex[uu & 0xf]; } return c; } /* Unpack binary data from a string */ SWIGRUNTIME const char * SWIG_UnpackData(const char *c, void *ptr, size_t sz) { register unsigned char *u = (unsigned char *) ptr; register const unsigned char *eu = u + sz; for (; u != eu; ++u) { register char d = *(c++); register unsigned char uu; if ((d >= '0') && (d <= '9')) uu = ((d - '0') << 4); else if ((d >= 'a') && (d <= 'f')) uu = ((d - ('a'-10)) << 4); else return (char *) 0; d = *(c++); if ((d >= '0') && (d <= '9')) uu |= (d - '0'); else if ((d >= 'a') && (d <= 'f')) uu |= (d - ('a'-10)); else return (char *) 0; *u = uu; } return c; } /* Pack 'void *' into a string buffer. */ SWIGRUNTIME char * SWIG_PackVoidPtr(char *buff, void *ptr, const char *name, size_t bsz) { char *r = buff; if ((2*sizeof(void *) + 2) > bsz) return 0; *(r++) = '_'; r = SWIG_PackData(r,&ptr,sizeof(void *)); if (strlen(name) + 1 > (bsz - (r - buff))) return 0; strcpy(r,name); return buff; } SWIGRUNTIME const char * SWIG_UnpackVoidPtr(const char *c, void **ptr, const char *name) { if (*c != '_') { if (strcmp(c,"NULL") == 0) { *ptr = (void *) 0; return name; } else { return 0; } } return SWIG_UnpackData(++c,ptr,sizeof(void *)); } SWIGRUNTIME char * SWIG_PackDataName(char *buff, void *ptr, size_t sz, const char *name, size_t bsz) { char *r = buff; size_t lname = (name ? strlen(name) : 0); if ((2*sz + 2 + lname) > bsz) return 0; *(r++) = '_'; r = SWIG_PackData(r,ptr,sz); if (lname) { strncpy(r,name,lname+1); } else { *r = 0; } return buff; } SWIGRUNTIME const char * SWIG_UnpackDataName(const char *c, void *ptr, size_t sz, const char *name) { if (*c != '_') { if (strcmp(c,"NULL") == 0) { memset(ptr,0,sz); return name; } else { return 0; } } return SWIG_UnpackData(++c,ptr,sz); } #ifdef __cplusplus } #endif /* Errors in SWIG */ #define SWIG_UnknownError -1 #define SWIG_IOError -2 #define SWIG_RuntimeError -3 #define SWIG_IndexError -4 #define SWIG_TypeError -5 #define SWIG_DivisionByZero -6 #define SWIG_OverflowError -7 #define SWIG_SyntaxError -8 #define SWIG_ValueError -9 #define SWIG_SystemError -10 #define SWIG_AttributeError -11 #define SWIG_MemoryError -12 #define SWIG_NullReferenceError -13 #include /* Remove global macros defined in Ruby's win32.h */ #ifdef write # undef write #endif #ifdef read # undef read #endif /* Ruby 1.7 defines NUM2LL(), LL2NUM() and ULL2NUM() macros */ #ifndef NUM2LL #define NUM2LL(x) NUM2LONG((x)) #endif #ifndef LL2NUM #define LL2NUM(x) INT2NUM((long) (x)) #endif #ifndef ULL2NUM #define ULL2NUM(x) UINT2NUM((unsigned long) (x)) #endif /* Ruby 1.7 doesn't (yet) define NUM2ULL() */ #ifndef NUM2ULL #ifdef HAVE_LONG_LONG #define NUM2ULL(x) rb_num2ull((x)) #else #define NUM2ULL(x) NUM2ULONG(x) #endif #endif /* RSTRING_LEN, etc are new in Ruby 1.9, but ->ptr and ->len no longer work */ /* Define these for older versions so we can just write code the new way */ #ifndef RSTRING_LEN # define RSTRING_LEN(x) RSTRING(x)->len #endif #ifndef RSTRING_PTR # define RSTRING_PTR(x) RSTRING(x)->ptr #endif #ifndef RARRAY_LEN # define RARRAY_LEN(x) RARRAY(x)->len #endif #ifndef RARRAY_PTR # define RARRAY_PTR(x) RARRAY(x)->ptr #endif /* * Need to be very careful about how these macros are defined, especially * when compiling C++ code or C code with an ANSI C compiler. * * VALUEFUNC(f) is a macro used to typecast a C function that implements * a Ruby method so that it can be passed as an argument to API functions * like rb_define_method() and rb_define_singleton_method(). * * VOIDFUNC(f) is a macro used to typecast a C function that implements * either the "mark" or "free" stuff for a Ruby Data object, so that it * can be passed as an argument to API functions like Data_Wrap_Struct() * and Data_Make_Struct(). */ #ifdef __cplusplus # ifndef RUBY_METHOD_FUNC /* These definitions should work for Ruby 1.4.6 */ # define PROTECTFUNC(f) ((VALUE (*)()) f) # define VALUEFUNC(f) ((VALUE (*)()) f) # define VOIDFUNC(f) ((void (*)()) f) # else # ifndef ANYARGS /* These definitions should work for Ruby 1.6 */ # define PROTECTFUNC(f) ((VALUE (*)()) f) # define VALUEFUNC(f) ((VALUE (*)()) f) # define VOIDFUNC(f) ((RUBY_DATA_FUNC) f) # else /* These definitions should work for Ruby 1.7+ */ # define PROTECTFUNC(f) ((VALUE (*)(VALUE)) f) # define VALUEFUNC(f) ((VALUE (*)(ANYARGS)) f) # define VOIDFUNC(f) ((RUBY_DATA_FUNC) f) # endif # endif #else # define VALUEFUNC(f) (f) # define VOIDFUNC(f) (f) #endif /* Don't use for expressions have side effect */ #ifndef RB_STRING_VALUE #define RB_STRING_VALUE(s) (TYPE(s) == T_STRING ? (s) : (*(volatile VALUE *)&(s) = rb_str_to_str(s))) #endif #ifndef StringValue #define StringValue(s) RB_STRING_VALUE(s) #endif #ifndef StringValuePtr #define StringValuePtr(s) RSTRING_PTR(RB_STRING_VALUE(s)) #endif #ifndef StringValueLen #define StringValueLen(s) RSTRING_LEN(RB_STRING_VALUE(s)) #endif #ifndef SafeStringValue #define SafeStringValue(v) do {\ StringValue(v);\ rb_check_safe_str(v);\ } while (0) #endif #ifndef HAVE_RB_DEFINE_ALLOC_FUNC #define rb_define_alloc_func(klass, func) rb_define_singleton_method((klass), "new", VALUEFUNC((func)), -1) #define rb_undef_alloc_func(klass) rb_undef_method(CLASS_OF((klass)), "new") #endif static VALUE _mSWIG = Qnil; /* ----------------------------------------------------------------------------- * error manipulation * ----------------------------------------------------------------------------- */ /* Define some additional error types */ #define SWIG_ObjectPreviouslyDeletedError -100 /* Define custom exceptions for errors that do not map to existing Ruby exceptions. Note this only works for C++ since a global cannot be initialized by a funtion in C. For C, fallback to rb_eRuntimeError.*/ SWIGINTERN VALUE getNullReferenceError(void) { static int init = 0; static VALUE rb_eNullReferenceError ; if (!init) { init = 1; rb_eNullReferenceError = rb_define_class("NullReferenceError", rb_eRuntimeError); } return rb_eNullReferenceError; } SWIGINTERN VALUE getObjectPreviouslyDeletedError(void) { static int init = 0; static VALUE rb_eObjectPreviouslyDeleted ; if (!init) { init = 1; rb_eObjectPreviouslyDeleted = rb_define_class("ObjectPreviouslyDeleted", rb_eRuntimeError); } return rb_eObjectPreviouslyDeleted; } SWIGINTERN VALUE SWIG_Ruby_ErrorType(int SWIG_code) { VALUE type; switch (SWIG_code) { case SWIG_MemoryError: type = rb_eNoMemError; break; case SWIG_IOError: type = rb_eIOError; break; case SWIG_RuntimeError: type = rb_eRuntimeError; break; case SWIG_IndexError: type = rb_eIndexError; break; case SWIG_TypeError: type = rb_eTypeError; break; case SWIG_DivisionByZero: type = rb_eZeroDivError; break; case SWIG_OverflowError: type = rb_eRangeError; break; case SWIG_SyntaxError: type = rb_eSyntaxError; break; case SWIG_ValueError: type = rb_eArgError; break; case SWIG_SystemError: type = rb_eFatal; break; case SWIG_AttributeError: type = rb_eRuntimeError; break; case SWIG_NullReferenceError: type = getNullReferenceError(); break; case SWIG_ObjectPreviouslyDeletedError: type = getObjectPreviouslyDeletedError(); break; case SWIG_UnknownError: type = rb_eRuntimeError; break; default: type = rb_eRuntimeError; } return type; } /* This function is called when a user inputs a wrong argument to a method. */ SWIGINTERN const char* Ruby_Format_TypeError( const char* msg, const char* type, const char* name, const int argn, VALUE input ) { char buf[128]; VALUE str; VALUE asStr; if ( msg && *msg ) { str = rb_str_new2(msg); } else { str = rb_str_new(NULL, 0); } str = rb_str_cat2( str, "Expected argument " ); sprintf( buf, "%d of type ", argn-1 ); str = rb_str_cat2( str, buf ); str = rb_str_cat2( str, type ); str = rb_str_cat2( str, ", but got " ); str = rb_str_cat2( str, rb_obj_classname(input) ); str = rb_str_cat2( str, " " ); asStr = rb_inspect(input); if ( RSTRING_LEN(asStr) > 30 ) { str = rb_str_cat( str, StringValuePtr(asStr), 30 ); str = rb_str_cat2( str, "..." ); } else { str = rb_str_append( str, asStr ); } if ( name ) { str = rb_str_cat2( str, "\n\tin SWIG method '" ); str = rb_str_cat2( str, name ); str = rb_str_cat2( str, "'" ); } return StringValuePtr( str ); } /* This function is called when an overloaded method fails */ SWIGINTERN void Ruby_Format_OverloadedError( const int argc, const int maxargs, const char* method, const char* prototypes ) { const char* msg = "Wrong # of arguments"; if ( argc <= maxargs ) msg = "Wrong arguments"; rb_raise(rb_eArgError,"%s for overloaded method '%s'.\n" "Possible C/C++ prototypes are:\n%s", msg, method, prototypes); } /* ----------------------------------------------------------------------------- * See the LICENSE file for information on copyright, usage and redistribution * of SWIG, and the README file for authors - http://www.swig.org/release.html. * * rubytracking.swg * * This file contains support for tracking mappings from * Ruby objects to C++ objects. This functionality is needed * to implement mark functions for Ruby's mark and sweep * garbage collector. * ----------------------------------------------------------------------------- */ #ifdef __cplusplus extern "C" { #endif /* Ruby 1.8 actually assumes the first case. */ #if SIZEOF_VOIDP == SIZEOF_LONG # define SWIG2NUM(v) LONG2NUM((unsigned long)v) # define NUM2SWIG(x) (unsigned long)NUM2LONG(x) #elif SIZEOF_VOIDP == SIZEOF_LONG_LONG # define SWIG2NUM(v) LL2NUM((unsigned long long)v) # define NUM2SWIG(x) (unsigned long long)NUM2LL(x) #else # error sizeof(void*) is not the same as long or long long #endif /* Global Ruby hash table to store Trackings from C/C++ structs to Ruby Objects. */ static VALUE swig_ruby_trackings = Qnil; /* Global variable that stores a reference to the ruby hash table delete function. */ static ID swig_ruby_hash_delete; /* Setup a Ruby hash table to store Trackings */ SWIGRUNTIME void SWIG_RubyInitializeTrackings(void) { /* Create a ruby hash table to store Trackings from C++ objects to Ruby objects. */ /* Try to see if some other .so has already created a tracking hash table, which we keep hidden in an instance var in the SWIG module. This is done to allow multiple DSOs to share the same tracking table. */ ID trackings_id = rb_intern( "@__trackings__" ); VALUE verbose = rb_gv_get("VERBOSE"); rb_gv_set("VERBOSE", Qfalse); swig_ruby_trackings = rb_ivar_get( _mSWIG, trackings_id ); rb_gv_set("VERBOSE", verbose); /* No, it hasn't. Create one ourselves */ if ( swig_ruby_trackings == Qnil ) { swig_ruby_trackings = rb_hash_new(); rb_ivar_set( _mSWIG, trackings_id, swig_ruby_trackings ); } /* Now store a reference to the hash table delete function so that we only have to look it up once.*/ swig_ruby_hash_delete = rb_intern("delete"); } /* Get a Ruby number to reference a pointer */ SWIGRUNTIME VALUE SWIG_RubyPtrToReference(void* ptr) { /* We cast the pointer to an unsigned long and then store a reference to it using a Ruby number object. */ /* Convert the pointer to a Ruby number */ return SWIG2NUM(ptr); } /* Get a Ruby number to reference an object */ SWIGRUNTIME VALUE SWIG_RubyObjectToReference(VALUE object) { /* We cast the object to an unsigned long and then store a reference to it using a Ruby number object. */ /* Convert the Object to a Ruby number */ return SWIG2NUM(object); } /* Get a Ruby object from a previously stored reference */ SWIGRUNTIME VALUE SWIG_RubyReferenceToObject(VALUE reference) { /* The provided Ruby number object is a reference to the Ruby object we want.*/ /* Convert the Ruby number to a Ruby object */ return NUM2SWIG(reference); } /* Add a Tracking from a C/C++ struct to a Ruby object */ SWIGRUNTIME void SWIG_RubyAddTracking(void* ptr, VALUE object) { /* In a Ruby hash table we store the pointer and the associated Ruby object. The trick here is that we cannot store the Ruby object directly - if we do then it cannot be garbage collected. So instead we typecast it as a unsigned long and convert it to a Ruby number object.*/ /* Get a reference to the pointer as a Ruby number */ VALUE key = SWIG_RubyPtrToReference(ptr); /* Get a reference to the Ruby object as a Ruby number */ VALUE value = SWIG_RubyObjectToReference(object); /* Store the mapping to the global hash table. */ rb_hash_aset(swig_ruby_trackings, key, value); } /* Get the Ruby object that owns the specified C/C++ struct */ SWIGRUNTIME VALUE SWIG_RubyInstanceFor(void* ptr) { /* Get a reference to the pointer as a Ruby number */ VALUE key = SWIG_RubyPtrToReference(ptr); /* Now lookup the value stored in the global hash table */ VALUE value = rb_hash_aref(swig_ruby_trackings, key); if (value == Qnil) { /* No object exists - return nil. */ return Qnil; } else { /* Convert this value to Ruby object */ return SWIG_RubyReferenceToObject(value); } } /* Remove a Tracking from a C/C++ struct to a Ruby object. It is very important to remove objects once they are destroyed since the same memory address may be reused later to create a new object. */ SWIGRUNTIME void SWIG_RubyRemoveTracking(void* ptr) { /* Get a reference to the pointer as a Ruby number */ VALUE key = SWIG_RubyPtrToReference(ptr); /* Delete the object from the hash table by calling Ruby's do this we need to call the Hash.delete method.*/ rb_funcall(swig_ruby_trackings, swig_ruby_hash_delete, 1, key); } /* This is a helper method that unlinks a Ruby object from its underlying C++ object. This is needed if the lifetime of the Ruby object is longer than the C++ object */ SWIGRUNTIME void SWIG_RubyUnlinkObjects(void* ptr) { VALUE object = SWIG_RubyInstanceFor(ptr); if (object != Qnil) { DATA_PTR(object) = 0; } } #ifdef __cplusplus } #endif /* ----------------------------------------------------------------------------- * Ruby API portion that goes into the runtime * ----------------------------------------------------------------------------- */ #ifdef __cplusplus extern "C" { #endif SWIGINTERN VALUE SWIG_Ruby_AppendOutput(VALUE target, VALUE o) { if (NIL_P(target)) { target = o; } else { if (TYPE(target) != T_ARRAY) { VALUE o2 = target; target = rb_ary_new(); rb_ary_push(target, o2); } rb_ary_push(target, o); } return target; } /* For ruby1.8.4 and earlier. */ #ifndef RUBY_INIT_STACK RUBY_EXTERN void Init_stack(VALUE* addr); # define RUBY_INIT_STACK \ VALUE variable_in_this_stack_frame; \ Init_stack(&variable_in_this_stack_frame); #endif #ifdef __cplusplus } #endif /* ----------------------------------------------------------------------------- * See the LICENSE file for information on copyright, usage and redistribution * of SWIG, and the README file for authors - http://www.swig.org/release.html. * * rubyrun.swg * * This file contains the runtime support for Ruby modules * and includes code for managing global variables and pointer * type checking. * ----------------------------------------------------------------------------- */ /* For backward compatibility only */ #define SWIG_POINTER_EXCEPTION 0 /* for raw pointers */ #define SWIG_ConvertPtr(obj, pptr, type, flags) SWIG_Ruby_ConvertPtrAndOwn(obj, pptr, type, flags, 0) #define SWIG_ConvertPtrAndOwn(obj,pptr,type,flags,own) SWIG_Ruby_ConvertPtrAndOwn(obj, pptr, type, flags, own) #define SWIG_NewPointerObj(ptr, type, flags) SWIG_Ruby_NewPointerObj(ptr, type, flags) #define SWIG_AcquirePtr(ptr, own) SWIG_Ruby_AcquirePtr(ptr, own) #define swig_owntype ruby_owntype /* for raw packed data */ #define SWIG_ConvertPacked(obj, ptr, sz, ty) SWIG_Ruby_ConvertPacked(obj, ptr, sz, ty, flags) #define SWIG_NewPackedObj(ptr, sz, type) SWIG_Ruby_NewPackedObj(ptr, sz, type) /* for class or struct pointers */ #define SWIG_ConvertInstance(obj, pptr, type, flags) SWIG_ConvertPtr(obj, pptr, type, flags) #define SWIG_NewInstanceObj(ptr, type, flags) SWIG_NewPointerObj(ptr, type, flags) /* for C or C++ function pointers */ #define SWIG_ConvertFunctionPtr(obj, pptr, type) SWIG_ConvertPtr(obj, pptr, type, 0) #define SWIG_NewFunctionPtrObj(ptr, type) SWIG_NewPointerObj(ptr, type, 0) /* for C++ member pointers, ie, member methods */ #define SWIG_ConvertMember(obj, ptr, sz, ty) SWIG_Ruby_ConvertPacked(obj, ptr, sz, ty) #define SWIG_NewMemberObj(ptr, sz, type) SWIG_Ruby_NewPackedObj(ptr, sz, type) /* Runtime API */ #define SWIG_GetModule(clientdata) SWIG_Ruby_GetModule() #define SWIG_SetModule(clientdata, pointer) SWIG_Ruby_SetModule(pointer) /* Error manipulation */ #define SWIG_ErrorType(code) SWIG_Ruby_ErrorType(code) #define SWIG_Error(code, msg) rb_raise(SWIG_Ruby_ErrorType(code), msg) #define SWIG_fail goto fail /* Ruby-specific SWIG API */ #define SWIG_InitRuntime() SWIG_Ruby_InitRuntime() #define SWIG_define_class(ty) SWIG_Ruby_define_class(ty) #define SWIG_NewClassInstance(value, ty) SWIG_Ruby_NewClassInstance(value, ty) #define SWIG_MangleStr(value) SWIG_Ruby_MangleStr(value) #define SWIG_CheckConvert(value, ty) SWIG_Ruby_CheckConvert(value, ty) /* ----------------------------------------------------------------------------- * pointers/data manipulation * ----------------------------------------------------------------------------- */ #ifdef __cplusplus extern "C" { #endif typedef struct { VALUE klass; VALUE mImpl; void (*mark)(void *); void (*destroy)(void *); int trackObjects; } swig_class; /* Global pointer used to keep some internal SWIG stuff */ static VALUE _cSWIG_Pointer = Qnil; static VALUE swig_runtime_data_type_pointer = Qnil; /* Global IDs used to keep some internal SWIG stuff */ static ID swig_arity_id = 0; static ID swig_call_id = 0; /* If your swig extension is to be run within an embedded ruby and has director callbacks, you should set -DRUBY_EMBEDDED during compilation. This will reset ruby's stack frame on each entry point from the main program the first time a virtual director function is invoked (in a non-recursive way). If this is not done, you run the risk of Ruby trashing the stack. */ #ifdef RUBY_EMBEDDED # define SWIG_INIT_STACK \ if ( !swig_virtual_calls ) { RUBY_INIT_STACK } \ ++swig_virtual_calls; # define SWIG_RELEASE_STACK --swig_virtual_calls; # define Ruby_DirectorTypeMismatchException(x) \ rb_raise( rb_eTypeError, x ); return c_result; static unsigned int swig_virtual_calls = 0; #else /* normal non-embedded extension */ # define SWIG_INIT_STACK # define SWIG_RELEASE_STACK # define Ruby_DirectorTypeMismatchException(x) \ throw Swig::DirectorTypeMismatchException( x ); #endif /* RUBY_EMBEDDED */ SWIGRUNTIME VALUE getExceptionClass(void) { static int init = 0; static VALUE rubyExceptionClass ; if (!init) { init = 1; rubyExceptionClass = rb_const_get(_mSWIG, rb_intern("Exception")); } return rubyExceptionClass; } /* This code checks to see if the Ruby object being raised as part of an exception inherits from the Ruby class Exception. If so, the object is simply returned. If not, then a new Ruby exception object is created and that will be returned to Ruby.*/ SWIGRUNTIME VALUE SWIG_Ruby_ExceptionType(swig_type_info *desc, VALUE obj) { VALUE exceptionClass = getExceptionClass(); if (rb_obj_is_kind_of(obj, exceptionClass)) { return obj; } else { return rb_exc_new3(rb_eRuntimeError, rb_obj_as_string(obj)); } } /* Initialize Ruby runtime support */ SWIGRUNTIME void SWIG_Ruby_InitRuntime(void) { if (_mSWIG == Qnil) { _mSWIG = rb_define_module("SWIG"); swig_call_id = rb_intern("call"); swig_arity_id = rb_intern("arity"); } } /* Define Ruby class for C type */ SWIGRUNTIME void SWIG_Ruby_define_class(swig_type_info *type) { VALUE klass; char *klass_name = (char *) malloc(4 + strlen(type->name) + 1); sprintf(klass_name, "TYPE%s", type->name); if (NIL_P(_cSWIG_Pointer)) { _cSWIG_Pointer = rb_define_class_under(_mSWIG, "Pointer", rb_cObject); rb_undef_method(CLASS_OF(_cSWIG_Pointer), "new"); } klass = rb_define_class_under(_mSWIG, klass_name, _cSWIG_Pointer); free((void *) klass_name); } /* Create a new pointer object */ SWIGRUNTIME VALUE SWIG_Ruby_NewPointerObj(void *ptr, swig_type_info *type, int flags) { int own = flags & SWIG_POINTER_OWN; int track; char *klass_name; swig_class *sklass; VALUE klass; VALUE obj; if (!ptr) return Qnil; if (type->clientdata) { sklass = (swig_class *) type->clientdata; /* Are we tracking this class and have we already returned this Ruby object? */ track = sklass->trackObjects; if (track) { obj = SWIG_RubyInstanceFor(ptr); /* Check the object's type and make sure it has the correct type. It might not in cases where methods do things like downcast methods. */ if (obj != Qnil) { VALUE value = rb_iv_get(obj, "@__swigtype__"); char* type_name = RSTRING_PTR(value); if (strcmp(type->name, type_name) == 0) { return obj; } } } /* Create a new Ruby object */ obj = Data_Wrap_Struct(sklass->klass, VOIDFUNC(sklass->mark), ( own ? VOIDFUNC(sklass->destroy) : (track ? VOIDFUNC(SWIG_RubyRemoveTracking) : 0 ) ), ptr); /* If tracking is on for this class then track this object. */ if (track) { SWIG_RubyAddTracking(ptr, obj); } } else { klass_name = (char *) malloc(4 + strlen(type->name) + 1); sprintf(klass_name, "TYPE%s", type->name); klass = rb_const_get(_mSWIG, rb_intern(klass_name)); free((void *) klass_name); obj = Data_Wrap_Struct(klass, 0, 0, ptr); } rb_iv_set(obj, "@__swigtype__", rb_str_new2(type->name)); return obj; } /* Create a new class instance (always owned) */ SWIGRUNTIME VALUE SWIG_Ruby_NewClassInstance(VALUE klass, swig_type_info *type) { VALUE obj; swig_class *sklass = (swig_class *) type->clientdata; obj = Data_Wrap_Struct(klass, VOIDFUNC(sklass->mark), VOIDFUNC(sklass->destroy), 0); rb_iv_set(obj, "@__swigtype__", rb_str_new2(type->name)); return obj; } /* Get type mangle from class name */ SWIGRUNTIMEINLINE char * SWIG_Ruby_MangleStr(VALUE obj) { VALUE stype = rb_iv_get(obj, "@__swigtype__"); return StringValuePtr(stype); } /* Acquire a pointer value */ typedef void (*ruby_owntype)(void*); SWIGRUNTIME ruby_owntype SWIG_Ruby_AcquirePtr(VALUE obj, ruby_owntype own) { if (obj) { ruby_owntype oldown = RDATA(obj)->dfree; RDATA(obj)->dfree = own; return oldown; } else { return 0; } } /* Convert a pointer value */ SWIGRUNTIME int SWIG_Ruby_ConvertPtrAndOwn(VALUE obj, void **ptr, swig_type_info *ty, int flags, ruby_owntype *own) { char *c; swig_cast_info *tc; void *vptr = 0; /* Grab the pointer */ if (NIL_P(obj)) { *ptr = 0; return SWIG_OK; } else { if (TYPE(obj) != T_DATA) { return SWIG_ERROR; } Data_Get_Struct(obj, void, vptr); } if (own) *own = RDATA(obj)->dfree; /* Check to see if the input object is giving up ownership of the underlying C struct or C++ object. If so then we need to reset the destructor since the Ruby object no longer owns the underlying C++ object.*/ if (flags & SWIG_POINTER_DISOWN) { /* Is tracking on for this class? */ int track = 0; if (ty && ty->clientdata) { swig_class *sklass = (swig_class *) ty->clientdata; track = sklass->trackObjects; } if (track) { /* We are tracking objects for this class. Thus we change the destructor * to SWIG_RubyRemoveTracking. This allows us to * remove the mapping from the C++ to Ruby object * when the Ruby object is garbage collected. If we don't * do this, then it is possible we will return a reference * to a Ruby object that no longer exists thereby crashing Ruby. */ RDATA(obj)->dfree = SWIG_RubyRemoveTracking; } else { RDATA(obj)->dfree = 0; } } /* Do type-checking if type info was provided */ if (ty) { if (ty->clientdata) { if (rb_obj_is_kind_of(obj, ((swig_class *) (ty->clientdata))->klass)) { if (vptr == 0) { /* The object has already been deleted */ return SWIG_ObjectPreviouslyDeletedError; } *ptr = vptr; return SWIG_OK; } } if ((c = SWIG_MangleStr(obj)) == NULL) { return SWIG_ERROR; } tc = SWIG_TypeCheck(c, ty); if (!tc) { return SWIG_ERROR; } *ptr = SWIG_TypeCast(tc, vptr); } else { *ptr = vptr; } return SWIG_OK; } /* Check convert */ SWIGRUNTIMEINLINE int SWIG_Ruby_CheckConvert(VALUE obj, swig_type_info *ty) { char *c = SWIG_MangleStr(obj); if (!c) return 0; return SWIG_TypeCheck(c,ty) != 0; } SWIGRUNTIME VALUE SWIG_Ruby_NewPackedObj(void *ptr, int sz, swig_type_info *type) { char result[1024]; char *r = result; if ((2*sz + 1 + strlen(type->name)) > 1000) return 0; *(r++) = '_'; r = SWIG_PackData(r, ptr, sz); strcpy(r, type->name); return rb_str_new2(result); } /* Convert a packed value value */ SWIGRUNTIME int SWIG_Ruby_ConvertPacked(VALUE obj, void *ptr, int sz, swig_type_info *ty) { swig_cast_info *tc; const char *c; if (TYPE(obj) != T_STRING) goto type_error; c = StringValuePtr(obj); /* Pointer values must start with leading underscore */ if (*c != '_') goto type_error; c++; c = SWIG_UnpackData(c, ptr, sz); if (ty) { tc = SWIG_TypeCheck(c, ty); if (!tc) goto type_error; } return SWIG_OK; type_error: return SWIG_ERROR; } SWIGRUNTIME swig_module_info * SWIG_Ruby_GetModule(void) { VALUE pointer; swig_module_info *ret = 0; VALUE verbose = rb_gv_get("VERBOSE"); /* temporarily disable warnings, since the pointer check causes warnings with 'ruby -w' */ rb_gv_set("VERBOSE", Qfalse); /* first check if pointer already created */ pointer = rb_gv_get("$swig_runtime_data_type_pointer" SWIG_RUNTIME_VERSION SWIG_TYPE_TABLE_NAME); if (pointer != Qnil) { Data_Get_Struct(pointer, swig_module_info, ret); } /* reinstate warnings */ rb_gv_set("VERBOSE", verbose); return ret; } SWIGRUNTIME void SWIG_Ruby_SetModule(swig_module_info *pointer) { /* register a new class */ VALUE cl = rb_define_class("swig_runtime_data", rb_cObject); /* create and store the structure pointer to a global variable */ swig_runtime_data_type_pointer = Data_Wrap_Struct(cl, 0, 0, pointer); rb_define_readonly_variable("$swig_runtime_data_type_pointer" SWIG_RUNTIME_VERSION SWIG_TYPE_TABLE_NAME, &swig_runtime_data_type_pointer); } /* This function can be used to check whether a proc or method or similarly callable function has been passed. Usually used in a %typecheck, like: %typecheck(c_callback_t, precedence=SWIG_TYPECHECK_POINTER) { $result = SWIG_Ruby_isCallable( $input ); } */ SWIGINTERN int SWIG_Ruby_isCallable( VALUE proc ) { if ( rb_respond_to( proc, swig_call_id ) == Qtrue ) return 1; return 0; } /* This function can be used to check the arity (number of arguments) a proc or method can take. Usually used in a %typecheck. Valid arities will be that equal to minimal or those < 0 which indicate a variable number of parameters at the end. */ SWIGINTERN int SWIG_Ruby_arity( VALUE proc, int minimal ) { if ( rb_respond_to( proc, swig_arity_id ) == Qtrue ) { VALUE num = rb_funcall( proc, swig_arity_id, 0 ); int arity = NUM2INT(num); if ( arity < 0 && (arity+1) < -minimal ) return 1; if ( arity == minimal ) return 1; return 1; } return 0; } #ifdef __cplusplus } #endif #define SWIG_exception_fail(code, msg) do { SWIG_Error(code, msg); SWIG_fail; } while(0) #define SWIG_contract_assert(expr, msg) if (!(expr)) { SWIG_Error(SWIG_RuntimeError, msg); SWIG_fail; } else /* -------- TYPES TABLE (BEGIN) -------- */ #define SWIGTYPE_p_char swig_types[0] #define SWIGTYPE_p_obexftp_client_t swig_types[1] #define SWIGTYPE_p_obexftp_info_cb_t swig_types[2] static swig_type_info *swig_types[4]; static swig_module_info swig_module = {swig_types, 3, 0, 0, 0, 0}; #define SWIG_TypeQuery(name) SWIG_TypeQueryModule(&swig_module, &swig_module, name) #define SWIG_MangledTypeQuery(name) SWIG_MangledTypeQueryModule(&swig_module, &swig_module, name) /* -------- TYPES TABLE (END) -------- */ #define SWIG_init Init_obexftp #define SWIG_name "Obexftp" static VALUE mObexftp; #define SWIG_RUBY_THREAD_BEGIN_BLOCK #define SWIG_RUBY_THREAD_END_BLOCK #define SWIGVERSION 0x010333 #define SWIG_VERSION SWIGVERSION #define SWIG_as_voidptr(a) (void *)((const void *)(a)) #define SWIG_as_voidptrptr(a) ((void)SWIG_as_voidptr(*a),(void**)(a)) #include #include #include #if !defined(SWIG_NO_LLONG_MAX) # if !defined(LLONG_MAX) && defined(__GNUC__) && defined (__LONG_LONG_MAX__) # define LLONG_MAX __LONG_LONG_MAX__ # define LLONG_MIN (-LLONG_MAX - 1LL) # define ULLONG_MAX (LLONG_MAX * 2ULL + 1ULL) # endif #endif #define SWIG_From_long LONG2NUM SWIGINTERNINLINE VALUE SWIG_From_int (int value) { return SWIG_From_long (value); } SWIGINTERN VALUE SWIG_ruby_failed(void) { return Qnil; } /*@SWIG:/usr/share/swig1.3/ruby/rubyprimtypes.swg,23,%ruby_aux_method@*/ SWIGINTERN VALUE SWIG_AUX_NUM2LONG(VALUE *args) { VALUE obj = args[0]; VALUE type = TYPE(obj); long *res = (long *)(args[1]); *res = type == T_FIXNUM ? NUM2LONG(obj) : rb_big2long(obj); return obj; } /*@SWIG@*/ SWIGINTERN int SWIG_AsVal_long (VALUE obj, long* val) { VALUE type = TYPE(obj); if ((type == T_FIXNUM) || (type == T_BIGNUM)) { long v; VALUE a[2]; a[0] = obj; a[1] = (VALUE)(&v); if (rb_rescue(RUBY_METHOD_FUNC(SWIG_AUX_NUM2LONG), (VALUE)a, RUBY_METHOD_FUNC(SWIG_ruby_failed), 0) != Qnil) { if (val) *val = v; return SWIG_OK; } } return SWIG_TypeError; } SWIGINTERN int SWIG_AsVal_int (VALUE obj, int *val) { long v; int res = SWIG_AsVal_long (obj, &v); if (SWIG_IsOK(res)) { if ((v < INT_MIN || v > INT_MAX)) { return SWIG_OverflowError; } else { if (val) *val = (int)(v); } } return res; } SWIGINTERN swig_type_info* SWIG_pchar_descriptor(void) { static int init = 0; static swig_type_info* info = 0; if (!init) { info = SWIG_TypeQuery("_p_char"); init = 1; } return info; } SWIGINTERN int SWIG_AsCharPtrAndSize(VALUE obj, char** cptr, size_t* psize, int *alloc) { if (TYPE(obj) == T_STRING) { #if defined(StringValuePtr) char *cstr = StringValuePtr(obj); #else char *cstr = STR2CSTR(obj); #endif size_t size = RSTRING_LEN(obj) + 1; if (cptr) { if (alloc) { if (*alloc == SWIG_NEWOBJ) { *cptr = (char *)memcpy((char *)malloc((size)*sizeof(char)), cstr, sizeof(char)*(size)); } else { *cptr = cstr; *alloc = SWIG_OLDOBJ; } } } if (psize) *psize = size; return SWIG_OK; } else { swig_type_info* pchar_descriptor = SWIG_pchar_descriptor(); if (pchar_descriptor) { void* vptr = 0; if (SWIG_ConvertPtr(obj, &vptr, pchar_descriptor, 0) == SWIG_OK) { if (cptr) *cptr = (char *)vptr; if (psize) *psize = vptr ? (strlen((char*)vptr) + 1) : 0; if (alloc) *alloc = SWIG_OLDOBJ; return SWIG_OK; } } } return SWIG_TypeError; } static void proxy_info_cb (int event, const char *buf, int len, void *data) { VALUE proc = (VALUE)data; VALUE msg = buf ? rb_str_new(buf, len) : Qnil; rb_funcall(proc, rb_intern("call"), 2, INT2NUM(event), msg); } SWIGINTERN obexftp_client_t *new_obexftp_client_t(int transport){ return obexftp_open(transport, NULL, NULL, NULL); } SWIGINTERN void obexftp_client_t_callback(obexftp_client_t *self,obexftp_info_cb_t infocb,void *user_data){ self->infocb = infocb; self->infocb_data = user_data; } SWIGINTERN char **obexftp_client_t_discover(obexftp_client_t *self){ return obexftp_discover(self->transport); } SWIGINTERN int obexftp_client_t_connect(obexftp_client_t *self,char *device,int port,char *src){ return obexftp_connect_src(self, src, device, port, UUID_FBS, sizeof(UUID_FBS)); } SWIGINTERN int obexftp_client_t_connectpush(obexftp_client_t *self,char *device,int port,char *src){ self->quirks &= ~OBEXFTP_SPLIT_SETPATH; return obexftp_connect_src(self, src, device, port, NULL, 0); } SWIGINTERN int obexftp_client_t_connectsync(obexftp_client_t *self,char *device,int port,char *src){ self->quirks &= ~OBEXFTP_SPLIT_SETPATH; return obexftp_connect_src(self, src, device, port, UUID_IRMC, sizeof(UUID_IRMC)); } SWIGINTERN int obexftp_client_t_disconnect(obexftp_client_t *self){ return obexftp_disconnect(self); } SWIGINTERN int obexftp_client_t_chpath(obexftp_client_t *self,char *name){ return obexftp_setpath(self, name, 0); } SWIGINTERN int obexftp_client_t_mkpath(obexftp_client_t *self,char *name){ return obexftp_setpath(self, name, 1); } SWIGINTERN int obexftp_client_t_cdup(obexftp_client_t *self){ return obexftp_setpath(self, NULL, 0); } SWIGINTERN int obexftp_client_t_cdtop(obexftp_client_t *self){ return obexftp_setpath(self, "", 0); } SWIGINTERN char *obexftp_client_t_get(obexftp_client_t *self,char *path){ (void) obexftp_get_type(self, NULL, NULL, path); return (char *)self->buf_data; } SWIGINTERN char *obexftp_client_t_list(obexftp_client_t *self,char *path){ (void) obexftp_get_type(self, XOBEX_LISTING, NULL, path); return (char *)self->buf_data; } SWIGINTERN char *obexftp_client_t_get_capability(obexftp_client_t *self,char *path){ (void) obexftp_get_type(self, XOBEX_CAPABILITY, NULL, path); return (char *)self->buf_data; } SWIGINTERN int obexftp_client_t_get_file(obexftp_client_t *self,char *path,char *localname){ return obexftp_get_type(self, NULL, localname, path); } SWIGINTERN int obexftp_client_t_put_file(obexftp_client_t *self,char *filename,char *remotename){ return obexftp_put_file(self, filename, remotename); } /*@SWIG:/usr/share/swig1.3/ruby/rubyprimtypes.swg,23,%ruby_aux_method@*/ SWIGINTERN VALUE SWIG_AUX_NUM2ULONG(VALUE *args) { VALUE obj = args[0]; VALUE type = TYPE(obj); unsigned long *res = (unsigned long *)(args[1]); *res = type == T_FIXNUM ? NUM2ULONG(obj) : rb_big2ulong(obj); return obj; } /*@SWIG@*/ SWIGINTERN int SWIG_AsVal_unsigned_SS_long (VALUE obj, unsigned long *val) { VALUE type = TYPE(obj); if ((type == T_FIXNUM) || (type == T_BIGNUM)) { unsigned long v; VALUE a[2]; a[0] = obj; a[1] = (VALUE)(&v); if (rb_rescue(RUBY_METHOD_FUNC(SWIG_AUX_NUM2ULONG), (VALUE)a, RUBY_METHOD_FUNC(SWIG_ruby_failed), 0) != Qnil) { if (val) *val = v; return SWIG_OK; } } return SWIG_TypeError; } SWIGINTERNINLINE int SWIG_AsVal_size_t (VALUE obj, size_t *val) { unsigned long v; int res = SWIG_AsVal_unsigned_SS_long (obj, val ? &v : 0); if (SWIG_IsOK(res) && val) *val = (size_t)(v); return res; } SWIGINTERN int obexftp_client_t_put_data(obexftp_client_t *self,char *data,size_t size,char *remotename){ return obexftp_put_data(self, data, size, remotename); } SWIGINTERN int obexftp_client_t_delete(obexftp_client_t *self,char *name){ return obexftp_del(self, name); } SWIGINTERN VALUE _wrap_discover(int argc, VALUE *argv, VALUE self) { int arg1 ; char **result = 0 ; int val1 ; int ecode1 = 0 ; VALUE vresult = Qnil; if ((argc < 1) || (argc > 1)) { rb_raise(rb_eArgError, "wrong # of arguments(%d for 1)",argc); SWIG_fail; } ecode1 = SWIG_AsVal_int(argv[0], &val1); if (!SWIG_IsOK(ecode1)) { SWIG_exception_fail(SWIG_ArgError(ecode1), Ruby_Format_TypeError( "", "int","obexftp_discover", 1, argv[0] )); } arg1 = (int)(val1); result = (char **)obexftp_discover(arg1); { char **p; vresult = rb_ary_new(); for (p = result; p && *p; p++) rb_ary_push(vresult, rb_str_new2(*p)); } return vresult; fail: return Qnil; } SWIGINTERN VALUE _wrap_browsebt(int argc, VALUE *argv, VALUE self) { char *arg1 = (char *) 0 ; int arg2 ; int result; int val2 ; int ecode2 = 0 ; VALUE vresult = Qnil; if ((argc < 2) || (argc > 2)) { rb_raise(rb_eArgError, "wrong # of arguments(%d for 2)",argc); SWIG_fail; } arg1 = (argv[0] != Qnil) ? StringValuePtr(argv[0]) : NULL; ecode2 = SWIG_AsVal_int(argv[1], &val2); if (!SWIG_IsOK(ecode2)) { SWIG_exception_fail(SWIG_ArgError(ecode2), Ruby_Format_TypeError( "", "int","obexftp_browse_bt", 2, argv[1] )); } arg2 = (int)(val2); result = (int)obexftp_browse_bt(arg1,arg2); vresult = SWIG_From_int((int)(result)); return vresult; fail: return Qnil; } swig_class cClient; #ifdef HAVE_RB_DEFINE_ALLOC_FUNC SWIGINTERN VALUE _wrap_Client_allocate(VALUE self) { #else SWIGINTERN VALUE _wrap_Client_allocate(int argc, VALUE *argv, VALUE self) { #endif VALUE vresult = SWIG_NewClassInstance(self, SWIGTYPE_p_obexftp_client_t); #ifndef HAVE_RB_DEFINE_ALLOC_FUNC rb_obj_call_init(vresult, argc, argv); #endif return vresult; } SWIGINTERN VALUE _wrap_new_Client(int argc, VALUE *argv, VALUE self) { int arg1 ; obexftp_client_t *result = 0 ; int val1 ; int ecode1 = 0 ; if ((argc < 1) || (argc > 1)) { rb_raise(rb_eArgError, "wrong # of arguments(%d for 1)",argc); SWIG_fail; } ecode1 = SWIG_AsVal_int(argv[0], &val1); if (!SWIG_IsOK(ecode1)) { SWIG_exception_fail(SWIG_ArgError(ecode1), Ruby_Format_TypeError( "", "int","obexftp_client_t", 1, argv[0] )); } arg1 = (int)(val1); result = (obexftp_client_t *)new_obexftp_client_t(arg1);DATA_PTR(self) = result; return self; fail: return Qnil; } SWIGINTERN void delete_obexftp_client_t(obexftp_client_t *self){ obexftp_close(self); } SWIGINTERN void free_obexftp_client_t(obexftp_client_t *arg1) { delete_obexftp_client_t(arg1); } SWIGINTERN VALUE _wrap_Client_callback(int argc, VALUE *argv, VALUE self) { obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; obexftp_info_cb_t arg2 ; void *arg3 = (void *) 0 ; void *argp1 = 0 ; int res1 = 0 ; if ((argc < 1) || (argc > 1)) { rb_raise(rb_eArgError, "wrong # of arguments(%d for 1)",argc); SWIG_fail; } res1 = SWIG_ConvertPtr(self, &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), Ruby_Format_TypeError( "", "obexftp_client_t *","callback", 1, self )); } arg1 = (obexftp_client_t *)(argp1); { arg2 = proxy_info_cb; arg3 = argv[0]; } obexftp_client_t_callback(arg1,arg2,arg3); return Qnil; fail: return Qnil; } SWIGINTERN VALUE _wrap_Client_discover(int argc, VALUE *argv, VALUE self) { obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; char **result = 0 ; void *argp1 = 0 ; int res1 = 0 ; VALUE vresult = Qnil; if ((argc < 0) || (argc > 0)) { rb_raise(rb_eArgError, "wrong # of arguments(%d for 0)",argc); SWIG_fail; } res1 = SWIG_ConvertPtr(self, &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), Ruby_Format_TypeError( "", "obexftp_client_t *","discover", 1, self )); } arg1 = (obexftp_client_t *)(argp1); result = (char **)obexftp_client_t_discover(arg1); { char **p; vresult = rb_ary_new(); for (p = result; p && *p; p++) rb_ary_push(vresult, rb_str_new2(*p)); } return vresult; fail: return Qnil; } SWIGINTERN VALUE _wrap_Client_connect(int argc, VALUE *argv, VALUE self) { obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; char *arg2 = (char *) 0 ; int arg3 ; char *arg4 = (char *) NULL ; int result; void *argp1 = 0 ; int res1 = 0 ; int val3 ; int ecode3 = 0 ; VALUE vresult = Qnil; if ((argc < 2) || (argc > 3)) { rb_raise(rb_eArgError, "wrong # of arguments(%d for 2)",argc); SWIG_fail; } res1 = SWIG_ConvertPtr(self, &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), Ruby_Format_TypeError( "", "obexftp_client_t *","connect", 1, self )); } arg1 = (obexftp_client_t *)(argp1); arg2 = (argv[0] != Qnil) ? StringValuePtr(argv[0]) : NULL; ecode3 = SWIG_AsVal_int(argv[1], &val3); if (!SWIG_IsOK(ecode3)) { SWIG_exception_fail(SWIG_ArgError(ecode3), Ruby_Format_TypeError( "", "int","connect", 3, argv[1] )); } arg3 = (int)(val3); if (argc > 2) { arg4 = (argv[2] != Qnil) ? StringValuePtr(argv[2]) : NULL; } result = (int)obexftp_client_t_connect(arg1,arg2,arg3,arg4); vresult = SWIG_From_int((int)(result)); return vresult; fail: return Qnil; } SWIGINTERN VALUE _wrap_Client_connectpush(int argc, VALUE *argv, VALUE self) { obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; char *arg2 = (char *) 0 ; int arg3 ; char *arg4 = (char *) NULL ; int result; void *argp1 = 0 ; int res1 = 0 ; int val3 ; int ecode3 = 0 ; VALUE vresult = Qnil; if ((argc < 2) || (argc > 3)) { rb_raise(rb_eArgError, "wrong # of arguments(%d for 2)",argc); SWIG_fail; } res1 = SWIG_ConvertPtr(self, &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), Ruby_Format_TypeError( "", "obexftp_client_t *","connectpush", 1, self )); } arg1 = (obexftp_client_t *)(argp1); arg2 = (argv[0] != Qnil) ? StringValuePtr(argv[0]) : NULL; ecode3 = SWIG_AsVal_int(argv[1], &val3); if (!SWIG_IsOK(ecode3)) { SWIG_exception_fail(SWIG_ArgError(ecode3), Ruby_Format_TypeError( "", "int","connectpush", 3, argv[1] )); } arg3 = (int)(val3); if (argc > 2) { arg4 = (argv[2] != Qnil) ? StringValuePtr(argv[2]) : NULL; } result = (int)obexftp_client_t_connectpush(arg1,arg2,arg3,arg4); vresult = SWIG_From_int((int)(result)); return vresult; fail: return Qnil; } SWIGINTERN VALUE _wrap_Client_connectsync(int argc, VALUE *argv, VALUE self) { obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; char *arg2 = (char *) 0 ; int arg3 ; char *arg4 = (char *) NULL ; int result; void *argp1 = 0 ; int res1 = 0 ; int val3 ; int ecode3 = 0 ; VALUE vresult = Qnil; if ((argc < 2) || (argc > 3)) { rb_raise(rb_eArgError, "wrong # of arguments(%d for 2)",argc); SWIG_fail; } res1 = SWIG_ConvertPtr(self, &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), Ruby_Format_TypeError( "", "obexftp_client_t *","connectsync", 1, self )); } arg1 = (obexftp_client_t *)(argp1); arg2 = (argv[0] != Qnil) ? StringValuePtr(argv[0]) : NULL; ecode3 = SWIG_AsVal_int(argv[1], &val3); if (!SWIG_IsOK(ecode3)) { SWIG_exception_fail(SWIG_ArgError(ecode3), Ruby_Format_TypeError( "", "int","connectsync", 3, argv[1] )); } arg3 = (int)(val3); if (argc > 2) { arg4 = (argv[2] != Qnil) ? StringValuePtr(argv[2]) : NULL; } result = (int)obexftp_client_t_connectsync(arg1,arg2,arg3,arg4); vresult = SWIG_From_int((int)(result)); return vresult; fail: return Qnil; } SWIGINTERN VALUE _wrap_Client_disconnect(int argc, VALUE *argv, VALUE self) { obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; int result; void *argp1 = 0 ; int res1 = 0 ; VALUE vresult = Qnil; if ((argc < 0) || (argc > 0)) { rb_raise(rb_eArgError, "wrong # of arguments(%d for 0)",argc); SWIG_fail; } res1 = SWIG_ConvertPtr(self, &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), Ruby_Format_TypeError( "", "obexftp_client_t *","disconnect", 1, self )); } arg1 = (obexftp_client_t *)(argp1); result = (int)obexftp_client_t_disconnect(arg1); vresult = SWIG_From_int((int)(result)); return vresult; fail: return Qnil; } SWIGINTERN VALUE _wrap_Client_chpath(int argc, VALUE *argv, VALUE self) { obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; char *arg2 = (char *) 0 ; int result; void *argp1 = 0 ; int res1 = 0 ; VALUE vresult = Qnil; if ((argc < 1) || (argc > 1)) { rb_raise(rb_eArgError, "wrong # of arguments(%d for 1)",argc); SWIG_fail; } res1 = SWIG_ConvertPtr(self, &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), Ruby_Format_TypeError( "", "obexftp_client_t *","chpath", 1, self )); } arg1 = (obexftp_client_t *)(argp1); arg2 = (argv[0] != Qnil) ? StringValuePtr(argv[0]) : NULL; result = (int)obexftp_client_t_chpath(arg1,arg2); vresult = SWIG_From_int((int)(result)); return vresult; fail: return Qnil; } SWIGINTERN VALUE _wrap_Client_mkpath(int argc, VALUE *argv, VALUE self) { obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; char *arg2 = (char *) 0 ; int result; void *argp1 = 0 ; int res1 = 0 ; VALUE vresult = Qnil; if ((argc < 1) || (argc > 1)) { rb_raise(rb_eArgError, "wrong # of arguments(%d for 1)",argc); SWIG_fail; } res1 = SWIG_ConvertPtr(self, &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), Ruby_Format_TypeError( "", "obexftp_client_t *","mkpath", 1, self )); } arg1 = (obexftp_client_t *)(argp1); arg2 = (argv[0] != Qnil) ? StringValuePtr(argv[0]) : NULL; result = (int)obexftp_client_t_mkpath(arg1,arg2); vresult = SWIG_From_int((int)(result)); return vresult; fail: return Qnil; } SWIGINTERN VALUE _wrap_Client_cdup(int argc, VALUE *argv, VALUE self) { obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; int result; void *argp1 = 0 ; int res1 = 0 ; VALUE vresult = Qnil; if ((argc < 0) || (argc > 0)) { rb_raise(rb_eArgError, "wrong # of arguments(%d for 0)",argc); SWIG_fail; } res1 = SWIG_ConvertPtr(self, &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), Ruby_Format_TypeError( "", "obexftp_client_t *","cdup", 1, self )); } arg1 = (obexftp_client_t *)(argp1); result = (int)obexftp_client_t_cdup(arg1); vresult = SWIG_From_int((int)(result)); return vresult; fail: return Qnil; } SWIGINTERN VALUE _wrap_Client_cdtop(int argc, VALUE *argv, VALUE self) { obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; int result; void *argp1 = 0 ; int res1 = 0 ; VALUE vresult = Qnil; if ((argc < 0) || (argc > 0)) { rb_raise(rb_eArgError, "wrong # of arguments(%d for 0)",argc); SWIG_fail; } res1 = SWIG_ConvertPtr(self, &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), Ruby_Format_TypeError( "", "obexftp_client_t *","cdtop", 1, self )); } arg1 = (obexftp_client_t *)(argp1); result = (int)obexftp_client_t_cdtop(arg1); vresult = SWIG_From_int((int)(result)); return vresult; fail: return Qnil; } SWIGINTERN VALUE _wrap_Client_get(int argc, VALUE *argv, VALUE self) { obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; char *arg2 = (char *) 0 ; char *result = 0 ; void *argp1 = 0 ; int res1 = 0 ; VALUE vresult = Qnil; if ((argc < 1) || (argc > 1)) { rb_raise(rb_eArgError, "wrong # of arguments(%d for 1)",argc); SWIG_fail; } res1 = SWIG_ConvertPtr(self, &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), Ruby_Format_TypeError( "", "obexftp_client_t *","get", 1, self )); } arg1 = (obexftp_client_t *)(argp1); arg2 = (argv[0] != Qnil) ? StringValuePtr(argv[0]) : NULL; result = (char *)obexftp_client_t_get(arg1,arg2); { vresult = arg1->buf_data ? rb_str_new(arg1->buf_data, arg1->buf_size) : Qnil; } return vresult; fail: return Qnil; } SWIGINTERN VALUE _wrap_Client_list(int argc, VALUE *argv, VALUE self) { obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; char *arg2 = (char *) NULL ; char *result = 0 ; void *argp1 = 0 ; int res1 = 0 ; VALUE vresult = Qnil; if ((argc < 0) || (argc > 1)) { rb_raise(rb_eArgError, "wrong # of arguments(%d for 0)",argc); SWIG_fail; } res1 = SWIG_ConvertPtr(self, &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), Ruby_Format_TypeError( "", "obexftp_client_t *","list", 1, self )); } arg1 = (obexftp_client_t *)(argp1); if (argc > 0) { arg2 = (argv[0] != Qnil) ? StringValuePtr(argv[0]) : NULL; } result = (char *)obexftp_client_t_list(arg1,arg2); { vresult = arg1->buf_data ? rb_str_new(arg1->buf_data, arg1->buf_size) : Qnil; } return vresult; fail: return Qnil; } SWIGINTERN VALUE _wrap_Client_get_capability(int argc, VALUE *argv, VALUE self) { obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; char *arg2 = (char *) NULL ; char *result = 0 ; void *argp1 = 0 ; int res1 = 0 ; VALUE vresult = Qnil; if ((argc < 0) || (argc > 1)) { rb_raise(rb_eArgError, "wrong # of arguments(%d for 0)",argc); SWIG_fail; } res1 = SWIG_ConvertPtr(self, &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), Ruby_Format_TypeError( "", "obexftp_client_t *","get_capability", 1, self )); } arg1 = (obexftp_client_t *)(argp1); if (argc > 0) { arg2 = (argv[0] != Qnil) ? StringValuePtr(argv[0]) : NULL; } result = (char *)obexftp_client_t_get_capability(arg1,arg2); { vresult = arg1->buf_data ? rb_str_new(arg1->buf_data, arg1->buf_size) : Qnil; } return vresult; fail: return Qnil; } SWIGINTERN VALUE _wrap_Client_get_file(int argc, VALUE *argv, VALUE self) { obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; char *arg2 = (char *) 0 ; char *arg3 = (char *) 0 ; int result; void *argp1 = 0 ; int res1 = 0 ; VALUE vresult = Qnil; if ((argc < 2) || (argc > 2)) { rb_raise(rb_eArgError, "wrong # of arguments(%d for 2)",argc); SWIG_fail; } res1 = SWIG_ConvertPtr(self, &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), Ruby_Format_TypeError( "", "obexftp_client_t *","get_file", 1, self )); } arg1 = (obexftp_client_t *)(argp1); arg2 = (argv[0] != Qnil) ? StringValuePtr(argv[0]) : NULL; arg3 = (argv[1] != Qnil) ? StringValuePtr(argv[1]) : NULL; result = (int)obexftp_client_t_get_file(arg1,arg2,arg3); vresult = SWIG_From_int((int)(result)); return vresult; fail: return Qnil; } SWIGINTERN VALUE _wrap_Client_put_file(int argc, VALUE *argv, VALUE self) { obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; char *arg2 = (char *) 0 ; char *arg3 = (char *) NULL ; int result; void *argp1 = 0 ; int res1 = 0 ; VALUE vresult = Qnil; if ((argc < 1) || (argc > 2)) { rb_raise(rb_eArgError, "wrong # of arguments(%d for 1)",argc); SWIG_fail; } res1 = SWIG_ConvertPtr(self, &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), Ruby_Format_TypeError( "", "obexftp_client_t *","put_file", 1, self )); } arg1 = (obexftp_client_t *)(argp1); arg2 = (argv[0] != Qnil) ? StringValuePtr(argv[0]) : NULL; if (argc > 1) { arg3 = (argv[1] != Qnil) ? StringValuePtr(argv[1]) : NULL; } result = (int)obexftp_client_t_put_file(arg1,arg2,arg3); vresult = SWIG_From_int((int)(result)); return vresult; fail: return Qnil; } SWIGINTERN VALUE _wrap_Client_put_data(int argc, VALUE *argv, VALUE self) { obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; char *arg2 = (char *) 0 ; size_t arg3 ; char *arg4 = (char *) NULL ; int result; void *argp1 = 0 ; int res1 = 0 ; VALUE vresult = Qnil; if ((argc < 1) || (argc > 2)) { rb_raise(rb_eArgError, "wrong # of arguments(%d for 1)",argc); SWIG_fail; } res1 = SWIG_ConvertPtr(self, &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), Ruby_Format_TypeError( "", "obexftp_client_t *","put_data", 1, self )); } arg1 = (obexftp_client_t *)(argp1); { /* Danger Wil Robinson */ /* VALUE str = StringValue(argv[0]); // perhaps better? */ arg2 = STR2CSTR(argv[0]); arg3 = (int) RSTRING(argv[0])->len; } if (argc > 1) { arg4 = (argv[1] != Qnil) ? StringValuePtr(argv[1]) : NULL; } result = (int)obexftp_client_t_put_data(arg1,arg2,arg3,arg4); vresult = SWIG_From_int((int)(result)); return vresult; fail: return Qnil; } SWIGINTERN VALUE _wrap_Client_delete(int argc, VALUE *argv, VALUE self) { obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; char *arg2 = (char *) 0 ; int result; void *argp1 = 0 ; int res1 = 0 ; VALUE vresult = Qnil; if ((argc < 1) || (argc > 1)) { rb_raise(rb_eArgError, "wrong # of arguments(%d for 1)",argc); SWIG_fail; } res1 = SWIG_ConvertPtr(self, &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), Ruby_Format_TypeError( "", "obexftp_client_t *","delete", 1, self )); } arg1 = (obexftp_client_t *)(argp1); arg2 = (argv[0] != Qnil) ? StringValuePtr(argv[0]) : NULL; result = (int)obexftp_client_t_delete(arg1,arg2); vresult = SWIG_From_int((int)(result)); return vresult; fail: return Qnil; } /* -------- TYPE CONVERSION AND EQUIVALENCE RULES (BEGIN) -------- */ static swig_type_info _swigt__p_char = {"_p_char", "char *", 0, 0, (void*)0, 0}; static swig_type_info _swigt__p_obexftp_client_t = {"_p_obexftp_client_t", "obexftp_client_t *", 0, 0, (void*)0, 0}; static swig_type_info _swigt__p_obexftp_info_cb_t = {"_p_obexftp_info_cb_t", "obexftp_info_cb_t *", 0, 0, (void*)0, 0}; static swig_type_info *swig_type_initial[] = { &_swigt__p_char, &_swigt__p_obexftp_client_t, &_swigt__p_obexftp_info_cb_t, }; static swig_cast_info _swigc__p_char[] = { {&_swigt__p_char, 0, 0, 0},{0, 0, 0, 0}}; static swig_cast_info _swigc__p_obexftp_client_t[] = { {&_swigt__p_obexftp_client_t, 0, 0, 0},{0, 0, 0, 0}}; static swig_cast_info _swigc__p_obexftp_info_cb_t[] = { {&_swigt__p_obexftp_info_cb_t, 0, 0, 0},{0, 0, 0, 0}}; static swig_cast_info *swig_cast_initial[] = { _swigc__p_char, _swigc__p_obexftp_client_t, _swigc__p_obexftp_info_cb_t, }; /* -------- TYPE CONVERSION AND EQUIVALENCE RULES (END) -------- */ /* ----------------------------------------------------------------------------- * Type initialization: * This problem is tough by the requirement that no dynamic * memory is used. Also, since swig_type_info structures store pointers to * swig_cast_info structures and swig_cast_info structures store pointers back * to swig_type_info structures, we need some lookup code at initialization. * The idea is that swig generates all the structures that are needed. * The runtime then collects these partially filled structures. * The SWIG_InitializeModule function takes these initial arrays out of * swig_module, and does all the lookup, filling in the swig_module.types * array with the correct data and linking the correct swig_cast_info * structures together. * * The generated swig_type_info structures are assigned staticly to an initial * array. We just loop through that array, and handle each type individually. * First we lookup if this type has been already loaded, and if so, use the * loaded structure instead of the generated one. Then we have to fill in the * cast linked list. The cast data is initially stored in something like a * two-dimensional array. Each row corresponds to a type (there are the same * number of rows as there are in the swig_type_initial array). Each entry in * a column is one of the swig_cast_info structures for that type. * The cast_initial array is actually an array of arrays, because each row has * a variable number of columns. So to actually build the cast linked list, * we find the array of casts associated with the type, and loop through it * adding the casts to the list. The one last trick we need to do is making * sure the type pointer in the swig_cast_info struct is correct. * * First off, we lookup the cast->type name to see if it is already loaded. * There are three cases to handle: * 1) If the cast->type has already been loaded AND the type we are adding * casting info to has not been loaded (it is in this module), THEN we * replace the cast->type pointer with the type pointer that has already * been loaded. * 2) If BOTH types (the one we are adding casting info to, and the * cast->type) are loaded, THEN the cast info has already been loaded by * the previous module so we just ignore it. * 3) Finally, if cast->type has not already been loaded, then we add that * swig_cast_info to the linked list (because the cast->type) pointer will * be correct. * ----------------------------------------------------------------------------- */ #ifdef __cplusplus extern "C" { #if 0 } /* c-mode */ #endif #endif #if 0 #define SWIGRUNTIME_DEBUG #endif SWIGRUNTIME void SWIG_InitializeModule(void *clientdata) { size_t i; swig_module_info *module_head, *iter; int found; clientdata = clientdata; /* check to see if the circular list has been setup, if not, set it up */ if (swig_module.next==0) { /* Initialize the swig_module */ swig_module.type_initial = swig_type_initial; swig_module.cast_initial = swig_cast_initial; swig_module.next = &swig_module; } /* Try and load any already created modules */ module_head = SWIG_GetModule(clientdata); if (!module_head) { /* This is the first module loaded for this interpreter */ /* so set the swig module into the interpreter */ SWIG_SetModule(clientdata, &swig_module); module_head = &swig_module; } else { /* the interpreter has loaded a SWIG module, but has it loaded this one? */ found=0; iter=module_head; do { if (iter==&swig_module) { found=1; break; } iter=iter->next; } while (iter!= module_head); /* if the is found in the list, then all is done and we may leave */ if (found) return; /* otherwise we must add out module into the list */ swig_module.next = module_head->next; module_head->next = &swig_module; } /* Now work on filling in swig_module.types */ #ifdef SWIGRUNTIME_DEBUG printf("SWIG_InitializeModule: size %d\n", swig_module.size); #endif for (i = 0; i < swig_module.size; ++i) { swig_type_info *type = 0; swig_type_info *ret; swig_cast_info *cast; #ifdef SWIGRUNTIME_DEBUG printf("SWIG_InitializeModule: type %d %s\n", i, swig_module.type_initial[i]->name); #endif /* if there is another module already loaded */ if (swig_module.next != &swig_module) { type = SWIG_MangledTypeQueryModule(swig_module.next, &swig_module, swig_module.type_initial[i]->name); } if (type) { /* Overwrite clientdata field */ #ifdef SWIGRUNTIME_DEBUG printf("SWIG_InitializeModule: found type %s\n", type->name); #endif if (swig_module.type_initial[i]->clientdata) { type->clientdata = swig_module.type_initial[i]->clientdata; #ifdef SWIGRUNTIME_DEBUG printf("SWIG_InitializeModule: found and overwrite type %s \n", type->name); #endif } } else { type = swig_module.type_initial[i]; } /* Insert casting types */ cast = swig_module.cast_initial[i]; while (cast->type) { /* Don't need to add information already in the list */ ret = 0; #ifdef SWIGRUNTIME_DEBUG printf("SWIG_InitializeModule: look cast %s\n", cast->type->name); #endif if (swig_module.next != &swig_module) { ret = SWIG_MangledTypeQueryModule(swig_module.next, &swig_module, cast->type->name); #ifdef SWIGRUNTIME_DEBUG if (ret) printf("SWIG_InitializeModule: found cast %s\n", ret->name); #endif } if (ret) { if (type == swig_module.type_initial[i]) { #ifdef SWIGRUNTIME_DEBUG printf("SWIG_InitializeModule: skip old type %s\n", ret->name); #endif cast->type = ret; ret = 0; } else { /* Check for casting already in the list */ swig_cast_info *ocast = SWIG_TypeCheck(ret->name, type); #ifdef SWIGRUNTIME_DEBUG if (ocast) printf("SWIG_InitializeModule: skip old cast %s\n", ret->name); #endif if (!ocast) ret = 0; } } if (!ret) { #ifdef SWIGRUNTIME_DEBUG printf("SWIG_InitializeModule: adding cast %s\n", cast->type->name); #endif if (type->cast) { type->cast->prev = cast; cast->next = type->cast; } type->cast = cast; } cast++; } /* Set entry in modules->types array equal to the type */ swig_module.types[i] = type; } swig_module.types[i] = 0; #ifdef SWIGRUNTIME_DEBUG printf("**** SWIG_InitializeModule: Cast List ******\n"); for (i = 0; i < swig_module.size; ++i) { int j = 0; swig_cast_info *cast = swig_module.cast_initial[i]; printf("SWIG_InitializeModule: type %d %s\n", i, swig_module.type_initial[i]->name); while (cast->type) { printf("SWIG_InitializeModule: cast type %s\n", cast->type->name); cast++; ++j; } printf("---- Total casts: %d\n",j); } printf("**** SWIG_InitializeModule: Cast List ******\n"); #endif } /* This function will propagate the clientdata field of type to * any new swig_type_info structures that have been added into the list * of equivalent types. It is like calling * SWIG_TypeClientData(type, clientdata) a second time. */ SWIGRUNTIME void SWIG_PropagateClientData(void) { size_t i; swig_cast_info *equiv; static int init_run = 0; if (init_run) return; init_run = 1; for (i = 0; i < swig_module.size; i++) { if (swig_module.types[i]->clientdata) { equiv = swig_module.types[i]->cast; while (equiv) { if (!equiv->converter) { if (equiv->type && !equiv->type->clientdata) SWIG_TypeClientData(equiv->type, swig_module.types[i]->clientdata); } equiv = equiv->next; } } } } #ifdef __cplusplus #if 0 { /* c-mode */ #endif } #endif /* */ #ifdef __cplusplus extern "C" #endif SWIGEXPORT void Init_obexftp(void) { size_t i; SWIG_InitRuntime(); mObexftp = rb_define_module("Obexftp"); SWIG_InitializeModule(0); for (i = 0; i < swig_module.size; i++) { SWIG_define_class(swig_module.types[i]); } SWIG_RubyInitializeTrackings(); rb_define_const(mObexftp, "IRDA", SWIG_From_int((int)(OBEX_TRANS_IRDA))); rb_define_const(mObexftp, "INET", SWIG_From_int((int)(OBEX_TRANS_INET))); rb_define_const(mObexftp, "CABLE", SWIG_From_int((int)(OBEX_TRANS_CUSTOM))); rb_define_const(mObexftp, "BLUETOOTH", SWIG_From_int((int)(OBEX_TRANS_BLUETOOTH))); rb_define_const(mObexftp, "USB", SWIG_From_int((int)(OBEX_TRANS_USB))); rb_define_const(mObexftp, "SYNC", SWIG_From_int((int)(OBEX_SYNC_SERVICE))); rb_define_const(mObexftp, "PUSH", SWIG_From_int((int)(OBEX_PUSH_SERVICE))); rb_define_const(mObexftp, "FTP", SWIG_From_int((int)(OBEX_FTP_SERVICE))); rb_define_module_function(mObexftp, "discover", _wrap_discover, -1); rb_define_module_function(mObexftp, "browsebt", _wrap_browsebt, -1); cClient.klass = rb_define_class_under(mObexftp, "Client", rb_cObject); SWIG_TypeClientData(SWIGTYPE_p_obexftp_client_t, (void *) &cClient); rb_define_alloc_func(cClient.klass, _wrap_Client_allocate); rb_define_method(cClient.klass, "initialize", _wrap_new_Client, -1); rb_define_method(cClient.klass, "callback", _wrap_Client_callback, -1); rb_define_method(cClient.klass, "discover", _wrap_Client_discover, -1); rb_define_method(cClient.klass, "connect", _wrap_Client_connect, -1); rb_define_method(cClient.klass, "connectpush", _wrap_Client_connectpush, -1); rb_define_method(cClient.klass, "connectsync", _wrap_Client_connectsync, -1); rb_define_method(cClient.klass, "disconnect", _wrap_Client_disconnect, -1); rb_define_method(cClient.klass, "chpath", _wrap_Client_chpath, -1); rb_define_method(cClient.klass, "mkpath", _wrap_Client_mkpath, -1); rb_define_method(cClient.klass, "cdup", _wrap_Client_cdup, -1); rb_define_method(cClient.klass, "cdtop", _wrap_Client_cdtop, -1); rb_define_method(cClient.klass, "get", _wrap_Client_get, -1); rb_define_method(cClient.klass, "list", _wrap_Client_list, -1); rb_define_method(cClient.klass, "get_capability", _wrap_Client_get_capability, -1); rb_define_method(cClient.klass, "get_file", _wrap_Client_get_file, -1); rb_define_method(cClient.klass, "put_file", _wrap_Client_put_file, -1); rb_define_method(cClient.klass, "put_data", _wrap_Client_put_data, -1); rb_define_method(cClient.klass, "delete", _wrap_Client_delete, -1); cClient.mark = 0; cClient.destroy = (void (*)(void *)) free_obexftp_client_t; cClient.trackObjects = 0; } obexftp-0.23/swig/ruby/Makefile.in0000644000076600000240000002513711146600665014041 00000000000000# Makefile.in generated by automake 1.9.6 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = ../.. am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = swig/ruby DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/iconv.m4 \ $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/acinclude.m4 \ $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = SOURCES = DIST_SOURCES = DATA = $(noinst_DATA) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ BFB_VERSION = @BFB_VERSION@ BLUETOOTH_CFLAGS = @BLUETOOTH_CFLAGS@ BLUETOOTH_LIBS = @BLUETOOTH_LIBS@ BUILD_DOCS_FALSE = @BUILD_DOCS_FALSE@ BUILD_DOCS_TRUE = @BUILD_DOCS_TRUE@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DSYMUTIL = @DSYMUTIL@ ECHO = @ECHO@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ ENABLE_PERL_FALSE = @ENABLE_PERL_FALSE@ ENABLE_PERL_TRUE = @ENABLE_PERL_TRUE@ ENABLE_PYTHON_FALSE = @ENABLE_PYTHON_FALSE@ ENABLE_PYTHON_TRUE = @ENABLE_PYTHON_TRUE@ ENABLE_RUBY_FALSE = @ENABLE_RUBY_FALSE@ ENABLE_RUBY_TRUE = @ENABLE_RUBY_TRUE@ ENABLE_SWIG_FALSE = @ENABLE_SWIG_FALSE@ ENABLE_SWIG_TRUE = @ENABLE_SWIG_TRUE@ ENABLE_TCL_FALSE = @ENABLE_TCL_FALSE@ ENABLE_TCL_TRUE = @ENABLE_TCL_TRUE@ EXEEXT = @EXEEXT@ EXTRA_LIBS = @EXTRA_LIBS@ F77 = @F77@ FFLAGS = @FFLAGS@ GREP = @GREP@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LDFLAGS = @LDFLAGS@ LIBICONV = @LIBICONV@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LN_S = @LN_S@ LTLIBICONV = @LTLIBICONV@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MULTICOBEX_VERSION = @MULTICOBEX_VERSION@ NMEDIT = @NMEDIT@ OBEXFTP_VERSION = @OBEXFTP_VERSION@ OBJEXT = @OBJEXT@ OPENOBEX_CFLAGS = @OPENOBEX_CFLAGS@ OPENOBEX_LIBS = @OPENOBEX_LIBS@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ PKG_CONFIG = @PKG_CONFIG@ PYTHON = @PYTHON@ PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@ PYTHON_PLATFORM = @PYTHON_PLATFORM@ PYTHON_PREFIX = @PYTHON_PREFIX@ PYTHON_VERSION = @PYTHON_VERSION@ RANLIB = @RANLIB@ REQUIRES = @REQUIRES@ RUBY = @RUBY@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ SWIG = @SWIG@ SWIG_LIB = @SWIG_LIB@ TCLSH = @TCLSH@ VERSION = @VERSION@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_F77 = @ac_ct_F77@ ac_perl_enabled = @ac_perl_enabled@ ac_python_enabled = @ac_python_enabled@ ac_ruby_enabled = @ac_ruby_enabled@ ac_tcl_enabled = @ac_tcl_enabled@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ pkgpyexecdir = @pkgpyexecdir@ pkgpythondir = @pkgpythondir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ pyexecdir = @pyexecdir@ pythondir = @pythondir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ EXTRA_DIST = extconf.rb ruby_wrap.c noinst_DATA = obexftp.so @ENABLE_SWIG_TRUE@MOSTLYCLEANFILES = ruby_wrap.c all: all-am .SUFFIXES: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu swig/ruby/Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --gnu swig/ruby/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool uninstall-info-am: tags: TAGS TAGS: ctags: CTAGS CTAGS: distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ list='$(DISTFILES)'; for file in $$list; do \ case $$file in \ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ esac; \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ dir="/$$dir"; \ $(mkdir_p) "$(distdir)$$dir"; \ else \ dir=''; \ fi; \ if test -d $$d/$$file; then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(DATA) installdirs: install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES) clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libtool clean-local mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic distclean-libtool dvi: dvi-am dvi-am: html: html-am info: info-am info-am: install-data-am: install-data-local install-exec-am: install-info: install-info-am install-man: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-info-am .PHONY: all all-am check check-am clean clean-generic clean-libtool \ clean-local distclean distclean-generic distclean-libtool \ distdir dvi dvi-am html html-am info info-am install \ install-am install-data install-data-am install-data-local \ install-exec install-exec-am install-info install-info-am \ install-man install-strip installcheck installcheck-am \ installdirs maintainer-clean maintainer-clean-generic \ mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ ps ps-am uninstall uninstall-am uninstall-info-am @ENABLE_SWIG_TRUE@ruby_wrap.c : $(srcdir)/../client.i $(srcdir)/../charmap.i @ENABLE_SWIG_TRUE@ $(SWIG) -ruby -module obexftp -I$(top_srcdir) -o $@ $(srcdir)/../client.i Makefile.ruby: extconf.rb PREFIX=$(prefix) $(RUBY) $< --with-obexftp-include=$(top_srcdir) obexftp.so: ruby_wrap.c Makefile.ruby $(MAKE) -fMakefile.ruby install-data-local: Makefile.ruby $(MAKE) -j1 -fMakefile.ruby install #uninstall #./lib/ruby/site_ruby/1.8/i686-linux/obexftp.so clean-local: if test -f Makefile.ruby; then $(MAKE) -fMakefile.ruby clean; fi rm -f Makefile.ruby Makefile.new rm -f *.o *.so *.log # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: obexftp-0.23/swig/ruby/extconf.rb0000644000076600000240000000202011146600644013746 00000000000000#!/usr/bin/env ruby require 'mkmf' # hack 1: ruby black magic to write a Makefile.new instead of a Makefile alias open_orig open def open(path, mode=nil, perm=nil) path = 'Makefile.new' if path == 'Makefile' if block_given? open_orig(path, mode, perm) { |io| yield(io) } else open_orig(path, mode, perm) end end if ENV['PREFIX'] prefix = CONFIG['prefix'] %w[ prefix sitedir datadir infodir mandir oldincludedir ].each do |key| CONFIG[key] = CONFIG[key].sub(/#{prefix}/, ENV['PREFIX']) end end dir_config('obexftp') if have_library('openobex', 'OBEX_Init') and find_library('bfb', 'bfb_io_open', '../../bfb/.libs') and find_library('multicobex', 'cobex_ctrans', '../../multicobex/.libs') and find_library('obexftp', 'obexftp_open', '../../obexftp/.libs') create_makefile('obexftp') # hack 2: strip all rpath references open('Makefile.ruby', 'w') do |out| IO.foreach('Makefile.new') do |line| out.puts line.gsub(/-Wl,-R'[^']*'/, '') end end else puts 'obex libs not found' end obexftp-0.23/swig/ruby/Makefile.am0000644000076600000240000000124311146600644014015 00000000000000EXTRA_DIST = extconf.rb ruby_wrap.c noinst_DATA = obexftp.so if ENABLE_SWIG ruby_wrap.c : $(srcdir)/../client.i $(srcdir)/../charmap.i $(SWIG) -ruby -module obexftp -I$(top_srcdir) -o $@ $(srcdir)/../client.i MOSTLYCLEANFILES=ruby_wrap.c endif Makefile.ruby: extconf.rb PREFIX=$(prefix) $(RUBY) $< --with-obexftp-include=$(top_srcdir) obexftp.so: ruby_wrap.c Makefile.ruby $(MAKE) -fMakefile.ruby install-data-local: Makefile.ruby $(MAKE) -j1 -fMakefile.ruby install #uninstall #./lib/ruby/site_ruby/1.8/i686-linux/obexftp.so clean-local: if test -f Makefile.ruby; then $(MAKE) -fMakefile.ruby clean; fi rm -f Makefile.ruby Makefile.new rm -f *.o *.so *.log obexftp-0.23/swig/Makefile.in0000644000076600000240000003653711146600665013066 00000000000000# Makefile.in generated by automake 1.9.6 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = .. am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = swig DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/iconv.m4 \ $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/acinclude.m4 \ $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-exec-recursive install-info-recursive \ install-recursive installcheck-recursive installdirs-recursive \ pdf-recursive ps-recursive uninstall-info-recursive \ uninstall-recursive ETAGS = etags CTAGS = ctags DIST_SUBDIRS = perl python ruby tcl DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ BFB_VERSION = @BFB_VERSION@ BLUETOOTH_CFLAGS = @BLUETOOTH_CFLAGS@ BLUETOOTH_LIBS = @BLUETOOTH_LIBS@ BUILD_DOCS_FALSE = @BUILD_DOCS_FALSE@ BUILD_DOCS_TRUE = @BUILD_DOCS_TRUE@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DSYMUTIL = @DSYMUTIL@ ECHO = @ECHO@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ ENABLE_PERL_FALSE = @ENABLE_PERL_FALSE@ ENABLE_PERL_TRUE = @ENABLE_PERL_TRUE@ ENABLE_PYTHON_FALSE = @ENABLE_PYTHON_FALSE@ ENABLE_PYTHON_TRUE = @ENABLE_PYTHON_TRUE@ ENABLE_RUBY_FALSE = @ENABLE_RUBY_FALSE@ ENABLE_RUBY_TRUE = @ENABLE_RUBY_TRUE@ ENABLE_SWIG_FALSE = @ENABLE_SWIG_FALSE@ ENABLE_SWIG_TRUE = @ENABLE_SWIG_TRUE@ ENABLE_TCL_FALSE = @ENABLE_TCL_FALSE@ ENABLE_TCL_TRUE = @ENABLE_TCL_TRUE@ EXEEXT = @EXEEXT@ EXTRA_LIBS = @EXTRA_LIBS@ F77 = @F77@ FFLAGS = @FFLAGS@ GREP = @GREP@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LDFLAGS = @LDFLAGS@ LIBICONV = @LIBICONV@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LN_S = @LN_S@ LTLIBICONV = @LTLIBICONV@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MULTICOBEX_VERSION = @MULTICOBEX_VERSION@ NMEDIT = @NMEDIT@ OBEXFTP_VERSION = @OBEXFTP_VERSION@ OBJEXT = @OBJEXT@ OPENOBEX_CFLAGS = @OPENOBEX_CFLAGS@ OPENOBEX_LIBS = @OPENOBEX_LIBS@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ PKG_CONFIG = @PKG_CONFIG@ PYTHON = @PYTHON@ PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@ PYTHON_PLATFORM = @PYTHON_PLATFORM@ PYTHON_PREFIX = @PYTHON_PREFIX@ PYTHON_VERSION = @PYTHON_VERSION@ RANLIB = @RANLIB@ REQUIRES = @REQUIRES@ RUBY = @RUBY@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ SWIG = @SWIG@ SWIG_LIB = @SWIG_LIB@ TCLSH = @TCLSH@ VERSION = @VERSION@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_F77 = @ac_ct_F77@ ac_perl_enabled = @ac_perl_enabled@ ac_python_enabled = @ac_python_enabled@ ac_ruby_enabled = @ac_ruby_enabled@ ac_tcl_enabled = @ac_tcl_enabled@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ pkgpyexecdir = @pkgpyexecdir@ pkgpythondir = @pkgpythondir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ pyexecdir = @pyexecdir@ pythondir = @pythondir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ EXTRA_DIST = client.i charmap.i @ENABLE_PERL_TRUE@MAYBE_PERL = perl @ENABLE_PYTHON_TRUE@MAYBE_PYTHON_ = python @ENABLE_RUBY_TRUE@MAYBE_RUBY = ruby @ENABLE_TCL_TRUE@MAYBE_TCL = tcl SUBDIRS = $(MAYBE_PERL) $(MAYBE_PYTHON_) $(MAYBE_RUBY) $(MAYBE_TCL) all: all-recursive .SUFFIXES: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu swig/Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --gnu swig/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool uninstall-info-am: # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" mostlyclean-recursive clean-recursive distclean-recursive \ maintainer-clean-recursive: @failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(CTAGS_ARGS)$$tags$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ list='$(DISTFILES)'; for file in $$list; do \ case $$file in \ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ esac; \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ dir="/$$dir"; \ $(mkdir_p) "$(distdir)$$dir"; \ else \ dir=''; \ fi; \ if test -d $$d/$$file; then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(mkdir_p) "$(distdir)/$$subdir" \ || exit 1; \ distdir=`$(am__cd) $(distdir) && pwd`; \ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ (cd $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$top_distdir" \ distdir="$$distdir/$$subdir" \ distdir) \ || exit 1; \ fi; \ done check-am: all-am check: check-recursive all-am: Makefile installdirs: installdirs-recursive installdirs-am: install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-recursive -rm -f Makefile distclean-am: clean-am distclean-generic distclean-libtool \ distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive info: info-recursive info-am: install-data-am: install-exec-am: install-info: install-info-recursive install-man: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-info-am uninstall-info: uninstall-info-recursive .PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am \ clean clean-generic clean-libtool clean-recursive ctags \ ctags-recursive distclean distclean-generic distclean-libtool \ distclean-recursive distclean-tags distdir dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-exec install-exec-am install-info \ install-info-am install-man install-strip installcheck \ installcheck-am installdirs installdirs-am maintainer-clean \ maintainer-clean-generic maintainer-clean-recursive \ mostlyclean mostlyclean-generic mostlyclean-libtool \ mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \ uninstall uninstall-am uninstall-info-am @ENABLE_PYTHON_TRUE@ # automake chokes on "MAYBE_PYTHON"? # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: obexftp-0.23/swig/charmap.i0000644000076600000240000000613611146600644012573 00000000000000/* * swig/charmap.i: ObexFTP client library SWIG interface * * Copyright (c) 2006 Christian W. Zuckschwerdt * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the Free * Software Foundation; either version 2 of the License, or (at your option) * any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License * for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * */ /* handle strings that maybe NULL */ #if defined SWIGPERL /* perl5.swg uses PL_sv_undef. */ #elif defined SWIGPYTHON /* python.swg uses "". Change to Py_None maybe? */ #elif defined SWIGRUBY %typemap(in) char * "$1 = ($input != Qnil) ? StringValuePtr($input) : NULL;"; %typemap(freearg) char * ""; /* Fix for >=swig-1.3.28 */ %typemap(out) char * "$result = $1 ? rb_str_new2($1) : Qnil;"; #elif defined SWIGTCL /* tcl8.swg is naive about this. Does it work? */ #else #warning "no char * in-typemap for this language" #endif /* handle non-sz strings */ %typemap(out) char * { #if defined SWIGPERL $result = newSVpvn(arg1->buf_data, arg1->buf_size); argvi++; #elif defined SWIGPYTHON $result = PyString_FromStringAndSize(arg1->buf_data, arg1->buf_size); #elif defined SWIGRUBY $result = arg1->buf_data ? rb_str_new(arg1->buf_data, arg1->buf_size) : Qnil; #elif defined SWIGTCL Tcl_SetObjResult(interp,Tcl_NewStringObj((char *)arg1->buf_data,arg1->buf_size)); #else #warning "no char * out-typemap for this language" #endif }; /* handle arrays of strings */ %typemap(out) char ** { #if defined SWIGPERL char **p; AV *myav = newAV(); for (p = $1; p && *p; p++) av_push(myav, newSVpv(*p, 0)); $result = newRV_noinc((SV*)myav); sv_2mortal($result); argvi++; #elif defined SWIGPYTHON char **p; $result = PyList_New(0); for (p = $1; p && *p; p++) PyList_Append($result, PyString_FromString(*p)); #elif defined SWIGRUBY char **p; $result = rb_ary_new(); for (p = $1; p && *p; p++) rb_ary_push($result, rb_str_new2(*p)); #elif defined SWIGTCL char **p; /* $result = Tcl_NewListObj(0, NULL); // not needed? */ for (p = $1; p && *p; p++) Tcl_ListObjAppendElement(interp, $result, Tcl_NewStringObj(*p, strlen(*p))); #else #warning "no char ** out-typemap for this language" #endif } %typemap(in) (char *data, size_t size) { /* Danger Wil Robinson */ #if defined SWIGPERL $1 = SvPV($input,$2); #elif defined SWIGPYTHON $1 = PyString_AsString($input); $2 = PyString_Size($input); #elif defined SWIGRUBY /* VALUE str = StringValue($input); // perhaps better? */ $1 = STR2CSTR($input); $2 = (int) RSTRING($input)->len; #elif defined SWIGTCL $1 = Tcl_GetStringFromObj($input,&$2); #else #warning "no char *, size_t in-typemap for this language" #endif }; obexftp-0.23/swig/Makefile.am0000644000076600000240000000047111146600644013036 00000000000000EXTRA_DIST = client.i charmap.i if ENABLE_PERL MAYBE_PERL = perl endif if ENABLE_PYTHON # automake chokes on "MAYBE_PYTHON"? MAYBE_PYTHON_ = python endif if ENABLE_RUBY MAYBE_RUBY = ruby endif if ENABLE_TCL MAYBE_TCL = tcl endif SUBDIRS = $(MAYBE_PERL) $(MAYBE_PYTHON_) $(MAYBE_RUBY) $(MAYBE_TCL) obexftp-0.23/swig/perl/0000777000076600000240000000000011146603263012026 500000000000000obexftp-0.23/swig/perl/Makefile.PL.in0000644000076600000240000000152411146600644014323 00000000000000#!/usr/bin/perl -w use ExtUtils::MakeMaker ; WriteMakefile( 'ABSTRACT' => q[Perl interface to OBEX filesytem] , 'AUTHOR' => q[Christian W. Zuckschwerdt ] , # 'VERSION' => q[@VERSION@], # Avoid compilation problem for Fedora Core 1 'DEFINE' => q[-DSKIP_SEARCH_H @DEFS@], 'INC' => q[-I@top_srcdir@ @CPPFLAGS@], # Default value for LDDLFLAGS is $Config{lddlflags}="-shared -L/usr/local/lib" # but we want rpath to be @libdir@ or @exec_prefix@/lib 'LDDLFLAGS' => q[-shared -Wl,-rpath=@prefix@/lib], 'LIBS' => q[-L@top_builddir@/obexftp/.libs -lobexftp -L@top_builddir@/multicobex/.libs -lmulticobex -L@top_builddir@/bfb/.libs -lbfb @OPENOBEX_LIBS@], 'OBJECT' => 'perl_wrap.o', # $(OBJ_EXT) 'NAME' => 'OBEXFTP', 'FIRST_MAKEFILE' => 'Makefile.perl', ) ; obexftp-0.23/swig/perl/Makefile.in0000644000076600000240000002566411146600665014027 00000000000000# Makefile.in generated by automake 1.9.6 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = ../.. am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = swig/perl DIST_COMMON = $(srcdir)/Makefile.PL.in $(srcdir)/Makefile.am \ $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/iconv.m4 \ $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/acinclude.m4 \ $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = Makefile.PL SOURCES = DIST_SOURCES = DATA = $(noinst_DATA) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ BFB_VERSION = @BFB_VERSION@ BLUETOOTH_CFLAGS = @BLUETOOTH_CFLAGS@ BLUETOOTH_LIBS = @BLUETOOTH_LIBS@ BUILD_DOCS_FALSE = @BUILD_DOCS_FALSE@ BUILD_DOCS_TRUE = @BUILD_DOCS_TRUE@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DSYMUTIL = @DSYMUTIL@ ECHO = @ECHO@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ ENABLE_PERL_FALSE = @ENABLE_PERL_FALSE@ ENABLE_PERL_TRUE = @ENABLE_PERL_TRUE@ ENABLE_PYTHON_FALSE = @ENABLE_PYTHON_FALSE@ ENABLE_PYTHON_TRUE = @ENABLE_PYTHON_TRUE@ ENABLE_RUBY_FALSE = @ENABLE_RUBY_FALSE@ ENABLE_RUBY_TRUE = @ENABLE_RUBY_TRUE@ ENABLE_SWIG_FALSE = @ENABLE_SWIG_FALSE@ ENABLE_SWIG_TRUE = @ENABLE_SWIG_TRUE@ ENABLE_TCL_FALSE = @ENABLE_TCL_FALSE@ ENABLE_TCL_TRUE = @ENABLE_TCL_TRUE@ EXEEXT = @EXEEXT@ EXTRA_LIBS = @EXTRA_LIBS@ F77 = @F77@ FFLAGS = @FFLAGS@ GREP = @GREP@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LDFLAGS = @LDFLAGS@ LIBICONV = @LIBICONV@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LN_S = @LN_S@ LTLIBICONV = @LTLIBICONV@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MULTICOBEX_VERSION = @MULTICOBEX_VERSION@ NMEDIT = @NMEDIT@ OBEXFTP_VERSION = @OBEXFTP_VERSION@ OBJEXT = @OBJEXT@ OPENOBEX_CFLAGS = @OPENOBEX_CFLAGS@ OPENOBEX_LIBS = @OPENOBEX_LIBS@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ PKG_CONFIG = @PKG_CONFIG@ PYTHON = @PYTHON@ PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@ PYTHON_PLATFORM = @PYTHON_PLATFORM@ PYTHON_PREFIX = @PYTHON_PREFIX@ PYTHON_VERSION = @PYTHON_VERSION@ RANLIB = @RANLIB@ REQUIRES = @REQUIRES@ RUBY = @RUBY@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ SWIG = @SWIG@ SWIG_LIB = @SWIG_LIB@ TCLSH = @TCLSH@ VERSION = @VERSION@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_F77 = @ac_ct_F77@ ac_perl_enabled = @ac_perl_enabled@ ac_python_enabled = @ac_python_enabled@ ac_ruby_enabled = @ac_ruby_enabled@ ac_tcl_enabled = @ac_tcl_enabled@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ pkgpyexecdir = @pkgpyexecdir@ pkgpythondir = @pkgpythondir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ pyexecdir = @pyexecdir@ pythondir = @pythondir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ EXTRA_DIST = perl_wrap.c OBEXFTP.pm noinst_DATA = OBEXFTP.so @ENABLE_SWIG_TRUE@MOSTLYCLEANFILES = perl_wrap.c OBEXFTP.pm OBEXFTP.bs all: all-am .SUFFIXES: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu swig/perl/Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --gnu swig/perl/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh Makefile.PL: $(top_builddir)/config.status $(srcdir)/Makefile.PL.in cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool uninstall-info-am: tags: TAGS TAGS: ctags: CTAGS CTAGS: distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ list='$(DISTFILES)'; for file in $$list; do \ case $$file in \ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ esac; \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ dir="/$$dir"; \ $(mkdir_p) "$(distdir)$$dir"; \ else \ dir=''; \ fi; \ if test -d $$d/$$file; then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(DATA) installdirs: install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES) clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libtool clean-local mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic distclean-libtool dvi: dvi-am dvi-am: html: html-am info: info-am info-am: install-data-am: install-data-local install-exec-am: install-info: install-info-am install-man: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-info-am .PHONY: all all-am check check-am clean clean-generic clean-libtool \ clean-local distclean distclean-generic distclean-libtool \ distdir dvi dvi-am html html-am info info-am install \ install-am install-data install-data-am install-data-local \ install-exec install-exec-am install-info install-info-am \ install-man install-strip installcheck installcheck-am \ installdirs maintainer-clean maintainer-clean-generic \ mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ ps ps-am uninstall uninstall-am uninstall-info-am @ENABLE_SWIG_TRUE@perl_wrap.c: $(srcdir)/../client.i $(srcdir)/../charmap.i @ENABLE_SWIG_TRUE@ $(SWIG) -perl -module OBEXFTP -o $@ $(srcdir)/../client.i Makefile.perl: Makefile.PL $(PERL) $< PREFIX=$(prefix) MAKEFILE=$@ OBEXFTP.so: perl_wrap.c Makefile.perl if test ! -f perl_wrap.c; then cp $(srcdir)/perl_wrap.c . ; fi $(MAKE) -fMakefile.perl install-data-local: Makefile.perl $(MAKE) -fMakefile.perl install # sadly there is no make uninstall for perl #uninstall-local: Makefile.perl # $(MAKE) -fMakefile.perl uninstall clean-local: if test -f Makefile.perl; then $(MAKE) -fMakefile.perl realclean; fi # rm -f Makefile.perl Makefile.perl.old rm -f *.so # *.o if test $(top_srcdir) != $(top_builddir) ; then rm -f perl_wrap.c ; fi # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: obexftp-0.23/swig/perl/Makefile.am0000644000076600000240000000151511146600644014000 00000000000000EXTRA_DIST = perl_wrap.c OBEXFTP.pm noinst_DATA = OBEXFTP.so if ENABLE_SWIG perl_wrap.c: $(srcdir)/../client.i $(srcdir)/../charmap.i $(SWIG) -perl -module OBEXFTP -o $@ $(srcdir)/../client.i MOSTLYCLEANFILES=perl_wrap.c OBEXFTP.pm OBEXFTP.bs endif Makefile.perl: Makefile.PL $(PERL) $< PREFIX=$(prefix) MAKEFILE=$@ OBEXFTP.so: perl_wrap.c Makefile.perl if test ! -f perl_wrap.c; then cp $(srcdir)/perl_wrap.c . ; fi $(MAKE) -fMakefile.perl install-data-local: Makefile.perl $(MAKE) -fMakefile.perl install # sadly there is no make uninstall for perl #uninstall-local: Makefile.perl # $(MAKE) -fMakefile.perl uninstall clean-local: if test -f Makefile.perl; then $(MAKE) -fMakefile.perl realclean; fi # rm -f Makefile.perl Makefile.perl.old rm -f *.so # *.o if test $(top_srcdir) != $(top_builddir) ; then rm -f perl_wrap.c ; fi obexftp-0.23/swig/perl/OBEXFTP.pm0000644000076600000240000000503711146601117013410 00000000000000# This file was automatically generated by SWIG (http://www.swig.org). # Version 1.3.33 # # Don't modify this file, modify the SWIG interface instead. package OBEXFTP; require Exporter; require DynaLoader; @ISA = qw(Exporter DynaLoader); package OBEXFTPc; bootstrap OBEXFTP; package OBEXFTP; @EXPORT = qw( ); # ---------- BASE METHODS ------------- package OBEXFTP; sub TIEHASH { my ($classname,$obj) = @_; return bless $obj, $classname; } sub CLEAR { } sub FIRSTKEY { } sub NEXTKEY { } sub FETCH { my ($self,$field) = @_; my $member_func = "swig_${field}_get"; $self->$member_func(); } sub STORE { my ($self,$field,$newval) = @_; my $member_func = "swig_${field}_set"; $self->$member_func($newval); } sub this { my $ptr = shift; return tied(%$ptr); } # ------- FUNCTION WRAPPERS -------- package OBEXFTP; *discover = *OBEXFTPc::discover; *browsebt = *OBEXFTPc::browsebt; ############# Class : OBEXFTP::client ############## package OBEXFTP::client; use vars qw(@ISA %OWNER %ITERATORS %BLESSEDMEMBERS); @ISA = qw( OBEXFTP ); %OWNER = (); %ITERATORS = (); sub new { my $pkg = shift; my $self = OBEXFTPc::new_client(@_); bless $self, $pkg if defined($self); } sub DESTROY { return unless $_[0]->isa('HASH'); my $self = tied(%{$_[0]}); return unless defined $self; delete $ITERATORS{$self}; if (exists $OWNER{$self}) { OBEXFTPc::delete_client($self); delete $OWNER{$self}; } } *callback = *OBEXFTPc::client_callback; *discover = *OBEXFTPc::client_discover; *connect = *OBEXFTPc::client_connect; *connectpush = *OBEXFTPc::client_connectpush; *connectsync = *OBEXFTPc::client_connectsync; *disconnect = *OBEXFTPc::client_disconnect; *chpath = *OBEXFTPc::client_chpath; *mkpath = *OBEXFTPc::client_mkpath; *cdup = *OBEXFTPc::client_cdup; *cdtop = *OBEXFTPc::client_cdtop; *get = *OBEXFTPc::client_get; *list = *OBEXFTPc::client_list; *get_capability = *OBEXFTPc::client_get_capability; *get_file = *OBEXFTPc::client_get_file; *put_file = *OBEXFTPc::client_put_file; *put_data = *OBEXFTPc::client_put_data; *delete = *OBEXFTPc::client_delete; sub DISOWN { my $self = shift; my $ptr = tied(%$self); delete $OWNER{$ptr}; } sub ACQUIRE { my $self = shift; my $ptr = tied(%$self); $OWNER{$ptr} = 1; } # ------- VARIABLE STUBS -------- package OBEXFTP; *IRDA = *OBEXFTPc::IRDA; *INET = *OBEXFTPc::INET; *CABLE = *OBEXFTPc::CABLE; *BLUETOOTH = *OBEXFTPc::BLUETOOTH; *USB = *OBEXFTPc::USB; *SYNC = *OBEXFTPc::SYNC; *PUSH = *OBEXFTPc::PUSH; *FTP = *OBEXFTPc::FTP; 1; obexftp-0.23/swig/perl/perl_wrap.c0000644000076600000240000025761011146601117014110 00000000000000/* ---------------------------------------------------------------------------- * This file was automatically generated by SWIG (http://www.swig.org). * Version 1.3.33 * * This file is not intended to be easily readable and contains a number of * coding conventions designed to improve portability and efficiency. Do not make * changes to this file unless you know what you are doing--modify the SWIG * interface file instead. * ----------------------------------------------------------------------------- */ #define SWIGPERL #define SWIG_CASTRANK_MODE /* ----------------------------------------------------------------------------- * This section contains generic SWIG labels for method/variable * declarations/attributes, and other compiler dependent labels. * ----------------------------------------------------------------------------- */ /* template workaround for compilers that cannot correctly implement the C++ standard */ #ifndef SWIGTEMPLATEDISAMBIGUATOR # if defined(__SUNPRO_CC) && (__SUNPRO_CC <= 0x560) # define SWIGTEMPLATEDISAMBIGUATOR template # elif defined(__HP_aCC) /* Needed even with `aCC -AA' when `aCC -V' reports HP ANSI C++ B3910B A.03.55 */ /* If we find a maximum version that requires this, the test would be __HP_aCC <= 35500 for A.03.55 */ # define SWIGTEMPLATEDISAMBIGUATOR template # else # define SWIGTEMPLATEDISAMBIGUATOR # endif #endif /* inline attribute */ #ifndef SWIGINLINE # if defined(__cplusplus) || (defined(__GNUC__) && !defined(__STRICT_ANSI__)) # define SWIGINLINE inline # else # define SWIGINLINE # endif #endif /* attribute recognised by some compilers to avoid 'unused' warnings */ #ifndef SWIGUNUSED # if defined(__GNUC__) # if !(defined(__cplusplus)) || (__GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 4)) # define SWIGUNUSED __attribute__ ((__unused__)) # else # define SWIGUNUSED # endif # elif defined(__ICC) # define SWIGUNUSED __attribute__ ((__unused__)) # else # define SWIGUNUSED # endif #endif #ifndef SWIGUNUSEDPARM # ifdef __cplusplus # define SWIGUNUSEDPARM(p) # else # define SWIGUNUSEDPARM(p) p SWIGUNUSED # endif #endif /* internal SWIG method */ #ifndef SWIGINTERN # define SWIGINTERN static SWIGUNUSED #endif /* internal inline SWIG method */ #ifndef SWIGINTERNINLINE # define SWIGINTERNINLINE SWIGINTERN SWIGINLINE #endif /* exporting methods */ #if (__GNUC__ >= 4) || (__GNUC__ == 3 && __GNUC_MINOR__ >= 4) # ifndef GCC_HASCLASSVISIBILITY # define GCC_HASCLASSVISIBILITY # endif #endif #ifndef SWIGEXPORT # if defined(_WIN32) || defined(__WIN32__) || defined(__CYGWIN__) # if defined(STATIC_LINKED) # define SWIGEXPORT # else # define SWIGEXPORT __declspec(dllexport) # endif # else # if defined(__GNUC__) && defined(GCC_HASCLASSVISIBILITY) # define SWIGEXPORT __attribute__ ((visibility("default"))) # else # define SWIGEXPORT # endif # endif #endif /* calling conventions for Windows */ #ifndef SWIGSTDCALL # if defined(_WIN32) || defined(__WIN32__) || defined(__CYGWIN__) # define SWIGSTDCALL __stdcall # else # define SWIGSTDCALL # endif #endif /* Deal with Microsoft's attempt at deprecating C standard runtime functions */ #if !defined(SWIG_NO_CRT_SECURE_NO_DEPRECATE) && defined(_MSC_VER) && !defined(_CRT_SECURE_NO_DEPRECATE) # define _CRT_SECURE_NO_DEPRECATE #endif /* Deal with Microsoft's attempt at deprecating methods in the standard C++ library */ #if !defined(SWIG_NO_SCL_SECURE_NO_DEPRECATE) && defined(_MSC_VER) && !defined(_SCL_SECURE_NO_DEPRECATE) # define _SCL_SECURE_NO_DEPRECATE #endif /* ----------------------------------------------------------------------------- * swigrun.swg * * This file contains generic CAPI SWIG runtime support for pointer * type checking. * ----------------------------------------------------------------------------- */ /* This should only be incremented when either the layout of swig_type_info changes, or for whatever reason, the runtime changes incompatibly */ #define SWIG_RUNTIME_VERSION "3" /* define SWIG_TYPE_TABLE_NAME as "SWIG_TYPE_TABLE" */ #ifdef SWIG_TYPE_TABLE # define SWIG_QUOTE_STRING(x) #x # define SWIG_EXPAND_AND_QUOTE_STRING(x) SWIG_QUOTE_STRING(x) # define SWIG_TYPE_TABLE_NAME SWIG_EXPAND_AND_QUOTE_STRING(SWIG_TYPE_TABLE) #else # define SWIG_TYPE_TABLE_NAME #endif /* You can use the SWIGRUNTIME and SWIGRUNTIMEINLINE macros for creating a static or dynamic library from the swig runtime code. In 99.9% of the cases, swig just needs to declare them as 'static'. But only do this if is strictly necessary, ie, if you have problems with your compiler or so. */ #ifndef SWIGRUNTIME # define SWIGRUNTIME SWIGINTERN #endif #ifndef SWIGRUNTIMEINLINE # define SWIGRUNTIMEINLINE SWIGRUNTIME SWIGINLINE #endif /* Generic buffer size */ #ifndef SWIG_BUFFER_SIZE # define SWIG_BUFFER_SIZE 1024 #endif /* Flags for pointer conversions */ #define SWIG_POINTER_DISOWN 0x1 /* Flags for new pointer objects */ #define SWIG_POINTER_OWN 0x1 /* Flags/methods for returning states. The swig conversion methods, as ConvertPtr, return and integer that tells if the conversion was successful or not. And if not, an error code can be returned (see swigerrors.swg for the codes). Use the following macros/flags to set or process the returning states. In old swig versions, you usually write code as: if (SWIG_ConvertPtr(obj,vptr,ty.flags) != -1) { // success code } else { //fail code } Now you can be more explicit as: int res = SWIG_ConvertPtr(obj,vptr,ty.flags); if (SWIG_IsOK(res)) { // success code } else { // fail code } that seems to be the same, but now you can also do Type *ptr; int res = SWIG_ConvertPtr(obj,(void **)(&ptr),ty.flags); if (SWIG_IsOK(res)) { // success code if (SWIG_IsNewObj(res) { ... delete *ptr; } else { ... } } else { // fail code } I.e., now SWIG_ConvertPtr can return new objects and you can identify the case and take care of the deallocation. Of course that requires also to SWIG_ConvertPtr to return new result values, as int SWIG_ConvertPtr(obj, ptr,...) { if () { if () { *ptr = ; return SWIG_NEWOBJ; } else { *ptr = ; return SWIG_OLDOBJ; } } else { return SWIG_BADOBJ; } } Of course, returning the plain '0(success)/-1(fail)' still works, but you can be more explicit by returning SWIG_BADOBJ, SWIG_ERROR or any of the swig errors code. Finally, if the SWIG_CASTRANK_MODE is enabled, the result code allows to return the 'cast rank', for example, if you have this int food(double) int fooi(int); and you call food(1) // cast rank '1' (1 -> 1.0) fooi(1) // cast rank '0' just use the SWIG_AddCast()/SWIG_CheckState() */ #define SWIG_OK (0) #define SWIG_ERROR (-1) #define SWIG_IsOK(r) (r >= 0) #define SWIG_ArgError(r) ((r != SWIG_ERROR) ? r : SWIG_TypeError) /* The CastRankLimit says how many bits are used for the cast rank */ #define SWIG_CASTRANKLIMIT (1 << 8) /* The NewMask denotes the object was created (using new/malloc) */ #define SWIG_NEWOBJMASK (SWIG_CASTRANKLIMIT << 1) /* The TmpMask is for in/out typemaps that use temporal objects */ #define SWIG_TMPOBJMASK (SWIG_NEWOBJMASK << 1) /* Simple returning values */ #define SWIG_BADOBJ (SWIG_ERROR) #define SWIG_OLDOBJ (SWIG_OK) #define SWIG_NEWOBJ (SWIG_OK | SWIG_NEWOBJMASK) #define SWIG_TMPOBJ (SWIG_OK | SWIG_TMPOBJMASK) /* Check, add and del mask methods */ #define SWIG_AddNewMask(r) (SWIG_IsOK(r) ? (r | SWIG_NEWOBJMASK) : r) #define SWIG_DelNewMask(r) (SWIG_IsOK(r) ? (r & ~SWIG_NEWOBJMASK) : r) #define SWIG_IsNewObj(r) (SWIG_IsOK(r) && (r & SWIG_NEWOBJMASK)) #define SWIG_AddTmpMask(r) (SWIG_IsOK(r) ? (r | SWIG_TMPOBJMASK) : r) #define SWIG_DelTmpMask(r) (SWIG_IsOK(r) ? (r & ~SWIG_TMPOBJMASK) : r) #define SWIG_IsTmpObj(r) (SWIG_IsOK(r) && (r & SWIG_TMPOBJMASK)) /* Cast-Rank Mode */ #if defined(SWIG_CASTRANK_MODE) # ifndef SWIG_TypeRank # define SWIG_TypeRank unsigned long # endif # ifndef SWIG_MAXCASTRANK /* Default cast allowed */ # define SWIG_MAXCASTRANK (2) # endif # define SWIG_CASTRANKMASK ((SWIG_CASTRANKLIMIT) -1) # define SWIG_CastRank(r) (r & SWIG_CASTRANKMASK) SWIGINTERNINLINE int SWIG_AddCast(int r) { return SWIG_IsOK(r) ? ((SWIG_CastRank(r) < SWIG_MAXCASTRANK) ? (r + 1) : SWIG_ERROR) : r; } SWIGINTERNINLINE int SWIG_CheckState(int r) { return SWIG_IsOK(r) ? SWIG_CastRank(r) + 1 : 0; } #else /* no cast-rank mode */ # define SWIG_AddCast # define SWIG_CheckState(r) (SWIG_IsOK(r) ? 1 : 0) #endif #include #ifdef __cplusplus extern "C" { #endif typedef void *(*swig_converter_func)(void *); typedef struct swig_type_info *(*swig_dycast_func)(void **); /* Structure to store inforomation on one type */ typedef struct swig_type_info { const char *name; /* mangled name of this type */ const char *str; /* human readable name of this type */ swig_dycast_func dcast; /* dynamic cast function down a hierarchy */ struct swig_cast_info *cast; /* linked list of types that can cast into this type */ void *clientdata; /* language specific type data */ int owndata; /* flag if the structure owns the clientdata */ } swig_type_info; /* Structure to store a type and conversion function used for casting */ typedef struct swig_cast_info { swig_type_info *type; /* pointer to type that is equivalent to this type */ swig_converter_func converter; /* function to cast the void pointers */ struct swig_cast_info *next; /* pointer to next cast in linked list */ struct swig_cast_info *prev; /* pointer to the previous cast */ } swig_cast_info; /* Structure used to store module information * Each module generates one structure like this, and the runtime collects * all of these structures and stores them in a circularly linked list.*/ typedef struct swig_module_info { swig_type_info **types; /* Array of pointers to swig_type_info structures that are in this module */ size_t size; /* Number of types in this module */ struct swig_module_info *next; /* Pointer to next element in circularly linked list */ swig_type_info **type_initial; /* Array of initially generated type structures */ swig_cast_info **cast_initial; /* Array of initially generated casting structures */ void *clientdata; /* Language specific module data */ } swig_module_info; /* Compare two type names skipping the space characters, therefore "char*" == "char *" and "Class" == "Class", etc. Return 0 when the two name types are equivalent, as in strncmp, but skipping ' '. */ SWIGRUNTIME int SWIG_TypeNameComp(const char *f1, const char *l1, const char *f2, const char *l2) { for (;(f1 != l1) && (f2 != l2); ++f1, ++f2) { while ((*f1 == ' ') && (f1 != l1)) ++f1; while ((*f2 == ' ') && (f2 != l2)) ++f2; if (*f1 != *f2) return (*f1 > *f2) ? 1 : -1; } return (int)((l1 - f1) - (l2 - f2)); } /* Check type equivalence in a name list like ||... Return 0 if not equal, 1 if equal */ SWIGRUNTIME int SWIG_TypeEquiv(const char *nb, const char *tb) { int equiv = 0; const char* te = tb + strlen(tb); const char* ne = nb; while (!equiv && *ne) { for (nb = ne; *ne; ++ne) { if (*ne == '|') break; } equiv = (SWIG_TypeNameComp(nb, ne, tb, te) == 0) ? 1 : 0; if (*ne) ++ne; } return equiv; } /* Check type equivalence in a name list like ||... Return 0 if equal, -1 if nb < tb, 1 if nb > tb */ SWIGRUNTIME int SWIG_TypeCompare(const char *nb, const char *tb) { int equiv = 0; const char* te = tb + strlen(tb); const char* ne = nb; while (!equiv && *ne) { for (nb = ne; *ne; ++ne) { if (*ne == '|') break; } equiv = (SWIG_TypeNameComp(nb, ne, tb, te) == 0) ? 1 : 0; if (*ne) ++ne; } return equiv; } /* think of this as a c++ template<> or a scheme macro */ #define SWIG_TypeCheck_Template(comparison, ty) \ if (ty) { \ swig_cast_info *iter = ty->cast; \ while (iter) { \ if (comparison) { \ if (iter == ty->cast) return iter; \ /* Move iter to the top of the linked list */ \ iter->prev->next = iter->next; \ if (iter->next) \ iter->next->prev = iter->prev; \ iter->next = ty->cast; \ iter->prev = 0; \ if (ty->cast) ty->cast->prev = iter; \ ty->cast = iter; \ return iter; \ } \ iter = iter->next; \ } \ } \ return 0 /* Check the typename */ SWIGRUNTIME swig_cast_info * SWIG_TypeCheck(const char *c, swig_type_info *ty) { SWIG_TypeCheck_Template(strcmp(iter->type->name, c) == 0, ty); } /* Same as previous function, except strcmp is replaced with a pointer comparison */ SWIGRUNTIME swig_cast_info * SWIG_TypeCheckStruct(swig_type_info *from, swig_type_info *into) { SWIG_TypeCheck_Template(iter->type == from, into); } /* Cast a pointer up an inheritance hierarchy */ SWIGRUNTIMEINLINE void * SWIG_TypeCast(swig_cast_info *ty, void *ptr) { return ((!ty) || (!ty->converter)) ? ptr : (*ty->converter)(ptr); } /* Dynamic pointer casting. Down an inheritance hierarchy */ SWIGRUNTIME swig_type_info * SWIG_TypeDynamicCast(swig_type_info *ty, void **ptr) { swig_type_info *lastty = ty; if (!ty || !ty->dcast) return ty; while (ty && (ty->dcast)) { ty = (*ty->dcast)(ptr); if (ty) lastty = ty; } return lastty; } /* Return the name associated with this type */ SWIGRUNTIMEINLINE const char * SWIG_TypeName(const swig_type_info *ty) { return ty->name; } /* Return the pretty name associated with this type, that is an unmangled type name in a form presentable to the user. */ SWIGRUNTIME const char * SWIG_TypePrettyName(const swig_type_info *type) { /* The "str" field contains the equivalent pretty names of the type, separated by vertical-bar characters. We choose to print the last name, as it is often (?) the most specific. */ if (!type) return NULL; if (type->str != NULL) { const char *last_name = type->str; const char *s; for (s = type->str; *s; s++) if (*s == '|') last_name = s+1; return last_name; } else return type->name; } /* Set the clientdata field for a type */ SWIGRUNTIME void SWIG_TypeClientData(swig_type_info *ti, void *clientdata) { swig_cast_info *cast = ti->cast; /* if (ti->clientdata == clientdata) return; */ ti->clientdata = clientdata; while (cast) { if (!cast->converter) { swig_type_info *tc = cast->type; if (!tc->clientdata) { SWIG_TypeClientData(tc, clientdata); } } cast = cast->next; } } SWIGRUNTIME void SWIG_TypeNewClientData(swig_type_info *ti, void *clientdata) { SWIG_TypeClientData(ti, clientdata); ti->owndata = 1; } /* Search for a swig_type_info structure only by mangled name Search is a O(log #types) We start searching at module start, and finish searching when start == end. Note: if start == end at the beginning of the function, we go all the way around the circular list. */ SWIGRUNTIME swig_type_info * SWIG_MangledTypeQueryModule(swig_module_info *start, swig_module_info *end, const char *name) { swig_module_info *iter = start; do { if (iter->size) { register size_t l = 0; register size_t r = iter->size - 1; do { /* since l+r >= 0, we can (>> 1) instead (/ 2) */ register size_t i = (l + r) >> 1; const char *iname = iter->types[i]->name; if (iname) { register int compare = strcmp(name, iname); if (compare == 0) { return iter->types[i]; } else if (compare < 0) { if (i) { r = i - 1; } else { break; } } else if (compare > 0) { l = i + 1; } } else { break; /* should never happen */ } } while (l <= r); } iter = iter->next; } while (iter != end); return 0; } /* Search for a swig_type_info structure for either a mangled name or a human readable name. It first searches the mangled names of the types, which is a O(log #types) If a type is not found it then searches the human readable names, which is O(#types). We start searching at module start, and finish searching when start == end. Note: if start == end at the beginning of the function, we go all the way around the circular list. */ SWIGRUNTIME swig_type_info * SWIG_TypeQueryModule(swig_module_info *start, swig_module_info *end, const char *name) { /* STEP 1: Search the name field using binary search */ swig_type_info *ret = SWIG_MangledTypeQueryModule(start, end, name); if (ret) { return ret; } else { /* STEP 2: If the type hasn't been found, do a complete search of the str field (the human readable name) */ swig_module_info *iter = start; do { register size_t i = 0; for (; i < iter->size; ++i) { if (iter->types[i]->str && (SWIG_TypeEquiv(iter->types[i]->str, name))) return iter->types[i]; } iter = iter->next; } while (iter != end); } /* neither found a match */ return 0; } /* Pack binary data into a string */ SWIGRUNTIME char * SWIG_PackData(char *c, void *ptr, size_t sz) { static const char hex[17] = "0123456789abcdef"; register const unsigned char *u = (unsigned char *) ptr; register const unsigned char *eu = u + sz; for (; u != eu; ++u) { register unsigned char uu = *u; *(c++) = hex[(uu & 0xf0) >> 4]; *(c++) = hex[uu & 0xf]; } return c; } /* Unpack binary data from a string */ SWIGRUNTIME const char * SWIG_UnpackData(const char *c, void *ptr, size_t sz) { register unsigned char *u = (unsigned char *) ptr; register const unsigned char *eu = u + sz; for (; u != eu; ++u) { register char d = *(c++); register unsigned char uu; if ((d >= '0') && (d <= '9')) uu = ((d - '0') << 4); else if ((d >= 'a') && (d <= 'f')) uu = ((d - ('a'-10)) << 4); else return (char *) 0; d = *(c++); if ((d >= '0') && (d <= '9')) uu |= (d - '0'); else if ((d >= 'a') && (d <= 'f')) uu |= (d - ('a'-10)); else return (char *) 0; *u = uu; } return c; } /* Pack 'void *' into a string buffer. */ SWIGRUNTIME char * SWIG_PackVoidPtr(char *buff, void *ptr, const char *name, size_t bsz) { char *r = buff; if ((2*sizeof(void *) + 2) > bsz) return 0; *(r++) = '_'; r = SWIG_PackData(r,&ptr,sizeof(void *)); if (strlen(name) + 1 > (bsz - (r - buff))) return 0; strcpy(r,name); return buff; } SWIGRUNTIME const char * SWIG_UnpackVoidPtr(const char *c, void **ptr, const char *name) { if (*c != '_') { if (strcmp(c,"NULL") == 0) { *ptr = (void *) 0; return name; } else { return 0; } } return SWIG_UnpackData(++c,ptr,sizeof(void *)); } SWIGRUNTIME char * SWIG_PackDataName(char *buff, void *ptr, size_t sz, const char *name, size_t bsz) { char *r = buff; size_t lname = (name ? strlen(name) : 0); if ((2*sz + 2 + lname) > bsz) return 0; *(r++) = '_'; r = SWIG_PackData(r,ptr,sz); if (lname) { strncpy(r,name,lname+1); } else { *r = 0; } return buff; } SWIGRUNTIME const char * SWIG_UnpackDataName(const char *c, void *ptr, size_t sz, const char *name) { if (*c != '_') { if (strcmp(c,"NULL") == 0) { memset(ptr,0,sz); return name; } else { return 0; } } return SWIG_UnpackData(++c,ptr,sz); } #ifdef __cplusplus } #endif /* Errors in SWIG */ #define SWIG_UnknownError -1 #define SWIG_IOError -2 #define SWIG_RuntimeError -3 #define SWIG_IndexError -4 #define SWIG_TypeError -5 #define SWIG_DivisionByZero -6 #define SWIG_OverflowError -7 #define SWIG_SyntaxError -8 #define SWIG_ValueError -9 #define SWIG_SystemError -10 #define SWIG_AttributeError -11 #define SWIG_MemoryError -12 #define SWIG_NullReferenceError -13 #ifdef __cplusplus /* Needed on some windows machines---since MS plays funny games with the header files under C++ */ #include #include extern "C" { #endif #include "EXTERN.h" #include "perl.h" #include "XSUB.h" /* Add in functionality missing in older versions of Perl. Much of this is based on Devel-PPPort on cpan. */ /* Add PERL_REVISION, PERL_VERSION, PERL_SUBVERSION if missing */ #ifndef PERL_REVISION # if !defined(__PATCHLEVEL_H_INCLUDED__) && !(defined(PATCHLEVEL) && defined(SUBVERSION)) # define PERL_PATCHLEVEL_H_IMPLICIT # include # endif # if !(defined(PERL_VERSION) || (defined(SUBVERSION) && defined(PATCHLEVEL))) # include # endif # ifndef PERL_REVISION # define PERL_REVISION (5) # define PERL_VERSION PATCHLEVEL # define PERL_SUBVERSION SUBVERSION # endif #endif #if defined(WIN32) && defined(PERL_OBJECT) && !defined(PerlIO_exportFILE) #define PerlIO_exportFILE(fh,fl) (FILE*)(fh) #endif #ifndef SvIOK_UV # define SvIOK_UV(sv) (SvIOK(sv) && (SvUVX(sv) == SvIVX(sv))) #endif #ifndef SvUOK # define SvUOK(sv) SvIOK_UV(sv) #endif #if ((PERL_VERSION < 4) || ((PERL_VERSION == 4) && (PERL_SUBVERSION <= 5))) # define PL_sv_undef sv_undef # define PL_na na # define PL_errgv errgv # define PL_sv_no sv_no # define PL_sv_yes sv_yes # define PL_markstack_ptr markstack_ptr #endif #ifndef IVSIZE # ifdef LONGSIZE # define IVSIZE LONGSIZE # else # define IVSIZE 4 /* A bold guess, but the best we can make. */ # endif #endif #ifndef INT2PTR # if (IVSIZE == PTRSIZE) && (UVSIZE == PTRSIZE) # define PTRV UV # define INT2PTR(any,d) (any)(d) # else # if PTRSIZE == LONGSIZE # define PTRV unsigned long # else # define PTRV unsigned # endif # define INT2PTR(any,d) (any)(PTRV)(d) # endif # define NUM2PTR(any,d) (any)(PTRV)(d) # define PTR2IV(p) INT2PTR(IV,p) # define PTR2UV(p) INT2PTR(UV,p) # define PTR2NV(p) NUM2PTR(NV,p) # if PTRSIZE == LONGSIZE # define PTR2ul(p) (unsigned long)(p) # else # define PTR2ul(p) INT2PTR(unsigned long,p) # endif #endif /* !INT2PTR */ #ifndef SvPV_nolen # define SvPV_nolen(x) SvPV(x,PL_na) #endif #ifndef get_sv # define get_sv perl_get_sv #endif #ifndef ERRSV # define ERRSV get_sv("@",FALSE) #endif #ifndef pTHX_ #define pTHX_ #endif #include #ifdef __cplusplus } #endif /* ----------------------------------------------------------------------------- * error manipulation * ----------------------------------------------------------------------------- */ SWIGINTERN const char* SWIG_Perl_ErrorType(int code) { const char* type = 0; switch(code) { case SWIG_MemoryError: type = "MemoryError"; break; case SWIG_IOError: type = "IOError"; break; case SWIG_RuntimeError: type = "RuntimeError"; break; case SWIG_IndexError: type = "IndexError"; break; case SWIG_TypeError: type = "TypeError"; break; case SWIG_DivisionByZero: type = "ZeroDivisionError"; break; case SWIG_OverflowError: type = "OverflowError"; break; case SWIG_SyntaxError: type = "SyntaxError"; break; case SWIG_ValueError: type = "ValueError"; break; case SWIG_SystemError: type = "SystemError"; break; case SWIG_AttributeError: type = "AttributeError"; break; default: type = "RuntimeError"; } return type; } /* ----------------------------------------------------------------------------- * perlrun.swg * * This file contains the runtime support for Perl modules * and includes code for managing global variables and pointer * type checking. * ----------------------------------------------------------------------------- */ #ifdef PERL_OBJECT #define SWIG_PERL_OBJECT_DECL CPerlObj *SWIGUNUSEDPARM(pPerl), #define SWIG_PERL_OBJECT_CALL pPerl, #else #define SWIG_PERL_OBJECT_DECL #define SWIG_PERL_OBJECT_CALL #endif /* Common SWIG API */ /* for raw pointers */ #define SWIG_ConvertPtr(obj, pp, type, flags) SWIG_Perl_ConvertPtr(SWIG_PERL_OBJECT_CALL obj, pp, type, flags) #define SWIG_NewPointerObj(p, type, flags) SWIG_Perl_NewPointerObj(SWIG_PERL_OBJECT_CALL p, type, flags) /* for raw packed data */ #define SWIG_ConvertPacked(obj, p, s, type) SWIG_Perl_ConvertPacked(SWIG_PERL_OBJECT_CALL obj, p, s, type) #define SWIG_NewPackedObj(p, s, type) SWIG_Perl_NewPackedObj(SWIG_PERL_OBJECT_CALL p, s, type) /* for class or struct pointers */ #define SWIG_ConvertInstance(obj, pptr, type, flags) SWIG_ConvertPtr(obj, pptr, type, flags) #define SWIG_NewInstanceObj(ptr, type, flags) SWIG_NewPointerObj(ptr, type, flags) /* for C or C++ function pointers */ #define SWIG_ConvertFunctionPtr(obj, pptr, type) SWIG_ConvertPtr(obj, pptr, type, 0) #define SWIG_NewFunctionPtrObj(ptr, type) SWIG_NewPointerObj(ptr, type, 0) /* for C++ member pointers, ie, member methods */ #define SWIG_ConvertMember(obj, ptr, sz, ty) SWIG_ConvertPacked(obj, ptr, sz, ty) #define SWIG_NewMemberObj(ptr, sz, type) SWIG_NewPackedObj(ptr, sz, type) /* Runtime API */ #define SWIG_GetModule(clientdata) SWIG_Perl_GetModule() #define SWIG_SetModule(clientdata, pointer) SWIG_Perl_SetModule(pointer) /* Error manipulation */ #define SWIG_ErrorType(code) SWIG_Perl_ErrorType(code) #define SWIG_Error(code, msg) sv_setpvf(GvSV(PL_errgv),"%s %s\n", SWIG_ErrorType(code), msg) #define SWIG_fail goto fail /* Perl-specific SWIG API */ #define SWIG_MakePtr(sv, ptr, type, flags) SWIG_Perl_MakePtr(SWIG_PERL_OBJECT_CALL sv, ptr, type, flags) #define SWIG_MakePackedObj(sv, p, s, type) SWIG_Perl_MakePackedObj(SWIG_PERL_OBJECT_CALL sv, p, s, type) #define SWIG_SetError(str) SWIG_Error(SWIG_RuntimeError, str) #define SWIG_PERL_DECL_ARGS_1(arg1) (SWIG_PERL_OBJECT_DECL arg1) #define SWIG_PERL_CALL_ARGS_1(arg1) (SWIG_PERL_OBJECT_CALL arg1) #define SWIG_PERL_DECL_ARGS_2(arg1, arg2) (SWIG_PERL_OBJECT_DECL arg1, arg2) #define SWIG_PERL_CALL_ARGS_2(arg1, arg2) (SWIG_PERL_OBJECT_CALL arg1, arg2) /* ----------------------------------------------------------------------------- * pointers/data manipulation * ----------------------------------------------------------------------------- */ /* For backward compatibility only */ #define SWIG_POINTER_EXCEPTION 0 #ifdef __cplusplus extern "C" { #endif #define SWIG_OWNER SWIG_POINTER_OWN #define SWIG_SHADOW SWIG_OWNER << 1 #define SWIG_MAYBE_PERL_OBJECT SWIG_PERL_OBJECT_DECL /* SWIG Perl macros */ /* Macro to declare an XS function */ #ifndef XSPROTO # define XSPROTO(name) void name(pTHX_ CV* cv) #endif /* Macro to call an XS function */ #ifdef PERL_OBJECT # define SWIG_CALLXS(_name) _name(cv,pPerl) #else # ifndef MULTIPLICITY # define SWIG_CALLXS(_name) _name(cv) # else # define SWIG_CALLXS(_name) _name(PERL_GET_THX, cv) # endif #endif #ifdef PERL_OBJECT #define MAGIC_PPERL CPerlObj *pPerl = (CPerlObj *) this; #ifdef __cplusplus extern "C" { #endif typedef int (CPerlObj::*SwigMagicFunc)(SV *, MAGIC *); #ifdef __cplusplus } #endif #define SWIG_MAGIC(a,b) (SV *a, MAGIC *b) #define SWIGCLASS_STATIC #else /* PERL_OBJECT */ #define MAGIC_PPERL #define SWIGCLASS_STATIC static SWIGUNUSED #ifndef MULTIPLICITY #define SWIG_MAGIC(a,b) (SV *a, MAGIC *b) #ifdef __cplusplus extern "C" { #endif typedef int (*SwigMagicFunc)(SV *, MAGIC *); #ifdef __cplusplus } #endif #else /* MULTIPLICITY */ #define SWIG_MAGIC(a,b) (struct interpreter *interp, SV *a, MAGIC *b) #ifdef __cplusplus extern "C" { #endif typedef int (*SwigMagicFunc)(struct interpreter *, SV *, MAGIC *); #ifdef __cplusplus } #endif #endif /* MULTIPLICITY */ #endif /* PERL_OBJECT */ /* Workaround for bug in perl 5.6.x croak and earlier */ #if (PERL_VERSION < 8) # ifdef PERL_OBJECT # define SWIG_croak_null() SWIG_Perl_croak_null(pPerl) static void SWIG_Perl_croak_null(CPerlObj *pPerl) # else static void SWIG_croak_null() # endif { SV *err=ERRSV; # if (PERL_VERSION < 6) croak("%_", err); # else if (SvOK(err) && !SvROK(err)) croak("%_", err); croak(Nullch); # endif } #else # define SWIG_croak_null() croak(Nullch) #endif /* Define how strict is the cast between strings and integers/doubles when overloading between these types occurs. The default is making it as strict as possible by using SWIG_AddCast when needed. You can use -DSWIG_PERL_NO_STRICT_STR2NUM at compilation time to disable the SWIG_AddCast, making the casting between string and numbers less strict. In the end, we try to solve the overloading between strings and numerical types in the more natural way, but if you can avoid it, well, avoid it using %rename, for example. */ #ifndef SWIG_PERL_NO_STRICT_STR2NUM # ifndef SWIG_PERL_STRICT_STR2NUM # define SWIG_PERL_STRICT_STR2NUM # endif #endif #ifdef SWIG_PERL_STRICT_STR2NUM /* string takes precedence */ #define SWIG_Str2NumCast(x) SWIG_AddCast(x) #else /* number takes precedence */ #define SWIG_Str2NumCast(x) x #endif #include SWIGRUNTIME const char * SWIG_Perl_TypeProxyName(const swig_type_info *type) { if (!type) return NULL; if (type->clientdata != NULL) { return (const char*) type->clientdata; } else { return type->name; } } SWIGRUNTIME swig_cast_info * SWIG_TypeProxyCheck(const char *c, swig_type_info *ty) { SWIG_TypeCheck_Template(( (!iter->type->clientdata && (strcmp((char*)iter->type->name, c) == 0)) || (iter->type->clientdata && (strcmp((char*)iter->type->clientdata, c) == 0))), ty); } /* Function for getting a pointer value */ SWIGRUNTIME int SWIG_Perl_ConvertPtr(SWIG_MAYBE_PERL_OBJECT SV *sv, void **ptr, swig_type_info *_t, int flags) { swig_cast_info *tc; void *voidptr = (void *)0; SV *tsv = 0; /* If magical, apply more magic */ if (SvGMAGICAL(sv)) mg_get(sv); /* Check to see if this is an object */ if (sv_isobject(sv)) { IV tmp = 0; tsv = (SV*) SvRV(sv); if ((SvTYPE(tsv) == SVt_PVHV)) { MAGIC *mg; if (SvMAGICAL(tsv)) { mg = mg_find(tsv,'P'); if (mg) { sv = mg->mg_obj; if (sv_isobject(sv)) { tsv = (SV*)SvRV(sv); tmp = SvIV(tsv); } } } else { return SWIG_ERROR; } } else { tmp = SvIV(tsv); } voidptr = INT2PTR(void *,tmp); } else if (! SvOK(sv)) { /* Check for undef */ *(ptr) = (void *) 0; return SWIG_OK; } else if (SvTYPE(sv) == SVt_RV) { /* Check for NULL pointer */ if (!SvROK(sv)) { *(ptr) = (void *) 0; return SWIG_OK; } else { return SWIG_ERROR; } } else { /* Don't know what it is */ return SWIG_ERROR; } if (_t) { /* Now see if the types match */ char *_c = HvNAME(SvSTASH(SvRV(sv))); tc = SWIG_TypeProxyCheck(_c,_t); if (!tc) { return SWIG_ERROR; } *ptr = SWIG_TypeCast(tc,voidptr); } else { *ptr = voidptr; } /* * DISOWN implementation: we need a perl guru to check this one. */ if (tsv && (flags & SWIG_POINTER_DISOWN)) { /* * almost copy paste code from below SWIG_POINTER_OWN setting */ SV *obj = sv; HV *stash = SvSTASH(SvRV(obj)); GV *gv = *(GV**) hv_fetch(stash, "OWNER", 5, TRUE); if (isGV(gv)) { HV *hv = GvHVn(gv); /* * To set ownership (see below), a newSViv(1) entry is added. * Hence, to remove ownership, we delete the entry. */ if (hv_exists_ent(hv, obj, 0)) { hv_delete_ent(hv, obj, 0, 0); } } } return SWIG_OK; } SWIGRUNTIME void SWIG_Perl_MakePtr(SWIG_MAYBE_PERL_OBJECT SV *sv, void *ptr, swig_type_info *t, int flags) { if (ptr && (flags & SWIG_SHADOW)) { SV *self; SV *obj=newSV(0); HV *hash=newHV(); HV *stash; sv_setref_pv(obj, (char *) SWIG_Perl_TypeProxyName(t), ptr); stash=SvSTASH(SvRV(obj)); if (flags & SWIG_POINTER_OWN) { HV *hv; GV *gv=*(GV**)hv_fetch(stash, "OWNER", 5, TRUE); if (!isGV(gv)) gv_init(gv, stash, "OWNER", 5, FALSE); hv=GvHVn(gv); hv_store_ent(hv, obj, newSViv(1), 0); } sv_magic((SV *)hash, (SV *)obj, 'P', Nullch, 0); SvREFCNT_dec(obj); self=newRV_noinc((SV *)hash); sv_setsv(sv, self); SvREFCNT_dec((SV *)self); sv_bless(sv, stash); } else { sv_setref_pv(sv, (char *) SWIG_Perl_TypeProxyName(t), ptr); } } SWIGRUNTIMEINLINE SV * SWIG_Perl_NewPointerObj(SWIG_MAYBE_PERL_OBJECT void *ptr, swig_type_info *t, int flags) { SV *result = sv_newmortal(); SWIG_MakePtr(result, ptr, t, flags); return result; } SWIGRUNTIME void SWIG_Perl_MakePackedObj(SWIG_MAYBE_PERL_OBJECT SV *sv, void *ptr, int sz, swig_type_info *type) { char result[1024]; char *r = result; if ((2*sz + 1 + strlen(SWIG_Perl_TypeProxyName(type))) > 1000) return; *(r++) = '_'; r = SWIG_PackData(r,ptr,sz); strcpy(r,SWIG_Perl_TypeProxyName(type)); sv_setpv(sv, result); } SWIGRUNTIME SV * SWIG_Perl_NewPackedObj(SWIG_MAYBE_PERL_OBJECT void *ptr, int sz, swig_type_info *type) { SV *result = sv_newmortal(); SWIG_Perl_MakePackedObj(result, ptr, sz, type); return result; } /* Convert a packed value value */ SWIGRUNTIME int SWIG_Perl_ConvertPacked(SWIG_MAYBE_PERL_OBJECT SV *obj, void *ptr, int sz, swig_type_info *ty) { swig_cast_info *tc; const char *c = 0; if ((!obj) || (!SvOK(obj))) return SWIG_ERROR; c = SvPV_nolen(obj); /* Pointer values must start with leading underscore */ if (*c != '_') return SWIG_ERROR; c++; c = SWIG_UnpackData(c,ptr,sz); if (ty) { tc = SWIG_TypeCheck(c,ty); if (!tc) return SWIG_ERROR; } return SWIG_OK; } /* Macros for low-level exception handling */ #define SWIG_croak(x) { SWIG_Error(SWIG_RuntimeError, x); SWIG_fail; } typedef XSPROTO(SwigPerlWrapper); typedef SwigPerlWrapper *SwigPerlWrapperPtr; /* Structure for command table */ typedef struct { const char *name; SwigPerlWrapperPtr wrapper; } swig_command_info; /* Information for constant table */ #define SWIG_INT 1 #define SWIG_FLOAT 2 #define SWIG_STRING 3 #define SWIG_POINTER 4 #define SWIG_BINARY 5 /* Constant information structure */ typedef struct swig_constant_info { int type; const char *name; long lvalue; double dvalue; void *pvalue; swig_type_info **ptype; } swig_constant_info; /* Structure for variable table */ typedef struct { const char *name; SwigMagicFunc set; SwigMagicFunc get; swig_type_info **type; } swig_variable_info; /* Magic variable code */ #ifndef PERL_OBJECT #define swig_create_magic(s,a,b,c) _swig_create_magic(s,a,b,c) #ifndef MULTIPLICITY SWIGRUNTIME void _swig_create_magic(SV *sv, char *name, int (*set)(SV *, MAGIC *), int (*get)(SV *,MAGIC *)) #else SWIGRUNTIME void _swig_create_magic(SV *sv, char *name, int (*set)(struct interpreter*, SV *, MAGIC *), int (*get)(struct interpreter*, SV *,MAGIC *)) #endif #else # define swig_create_magic(s,a,b,c) _swig_create_magic(pPerl,s,a,b,c) SWIGRUNTIME void _swig_create_magic(CPerlObj *pPerl, SV *sv, const char *name, int (CPerlObj::*set)(SV *, MAGIC *), int (CPerlObj::*get)(SV *, MAGIC *)) #endif { MAGIC *mg; sv_magic(sv,sv,'U',(char *) name,strlen(name)); mg = mg_find(sv,'U'); mg->mg_virtual = (MGVTBL *) malloc(sizeof(MGVTBL)); mg->mg_virtual->svt_get = (SwigMagicFunc) get; mg->mg_virtual->svt_set = (SwigMagicFunc) set; mg->mg_virtual->svt_len = 0; mg->mg_virtual->svt_clear = 0; mg->mg_virtual->svt_free = 0; } SWIGRUNTIME swig_module_info * SWIG_Perl_GetModule(void) { static void *type_pointer = (void *)0; SV *pointer; /* first check if pointer already created */ if (!type_pointer) { pointer = get_sv("swig_runtime_data::type_pointer" SWIG_RUNTIME_VERSION SWIG_TYPE_TABLE_NAME, FALSE); if (pointer && SvOK(pointer)) { type_pointer = INT2PTR(swig_type_info **, SvIV(pointer)); } } return (swig_module_info *) type_pointer; } SWIGRUNTIME void SWIG_Perl_SetModule(swig_module_info *module) { SV *pointer; /* create a new pointer */ pointer = get_sv("swig_runtime_data::type_pointer" SWIG_RUNTIME_VERSION SWIG_TYPE_TABLE_NAME, TRUE); sv_setiv(pointer, PTR2IV(module)); } #ifdef __cplusplus } #endif /* Workaround perl5 global namespace pollution. Note that undefining library * functions like fopen will not solve the problem on all platforms as fopen * might be a macro on Windows but not necessarily on other operating systems. */ #ifdef do_open #undef do_open #endif #ifdef do_close #undef do_close #endif #ifdef scalar #undef scalar #endif #ifdef list #undef list #endif #ifdef apply #undef apply #endif #ifdef convert #undef convert #endif #ifdef Error #undef Error #endif #ifdef form #undef form #endif #ifdef vform #undef vform #endif #ifdef LABEL #undef LABEL #endif #ifdef METHOD #undef METHOD #endif #ifdef Move #undef Move #endif #ifdef yylex #undef yylex #endif #ifdef yyparse #undef yyparse #endif #ifdef yyerror #undef yyerror #endif #ifdef invert #undef invert #endif #ifdef ref #undef ref #endif #ifdef read #undef read #endif #ifdef write #undef write #endif #ifdef eof #undef eof #endif #ifdef bool #undef bool #endif #ifdef close #undef close #endif #ifdef rewind #undef rewind #endif #ifdef free #undef free #endif #ifdef malloc #undef malloc #endif #ifdef calloc #undef calloc #endif #ifdef Stat #undef Stat #endif #ifdef check #undef check #endif #ifdef seekdir #undef seekdir #endif #ifdef open #undef open #endif #define SWIG_exception_fail(code, msg) do { SWIG_Error(code, msg); SWIG_fail; } while(0) #define SWIG_contract_assert(expr, msg) if (!(expr)) { SWIG_Error(SWIG_RuntimeError, msg); SWIG_fail; } else /* -------- TYPES TABLE (BEGIN) -------- */ #define SWIGTYPE_p_char swig_types[0] #define SWIGTYPE_p_obexftp_client_t swig_types[1] #define SWIGTYPE_p_obexftp_info_cb_t swig_types[2] static swig_type_info *swig_types[4]; static swig_module_info swig_module = {swig_types, 3, 0, 0, 0, 0}; #define SWIG_TypeQuery(name) SWIG_TypeQueryModule(&swig_module, &swig_module, name) #define SWIG_MangledTypeQuery(name) SWIG_MangledTypeQueryModule(&swig_module, &swig_module, name) /* -------- TYPES TABLE (END) -------- */ #define SWIG_init boot_OBEXFTP #define SWIG_name "OBEXFTPc::boot_OBEXFTP" #define SWIG_prefix "OBEXFTPc::" #define SWIGVERSION 0x010333 #define SWIG_VERSION SWIGVERSION #define SWIG_as_voidptr(a) (void *)((const void *)(a)) #define SWIG_as_voidptrptr(a) ((void)SWIG_as_voidptr(*a),(void**)(a)) #ifdef __cplusplus extern "C" #endif #ifndef PERL_OBJECT #ifndef MULTIPLICITY SWIGEXPORT void SWIG_init (CV* cv); #else SWIGEXPORT void SWIG_init (pTHXo_ CV* cv); #endif #else SWIGEXPORT void SWIG_init (CV *cv, CPerlObj *); #endif #include #include SWIGINTERNINLINE SV * SWIG_From_long SWIG_PERL_DECL_ARGS_1(long value) { SV *obj = sv_newmortal(); sv_setiv(obj, (IV) value); return obj; } SWIGINTERNINLINE SV * SWIG_From_int SWIG_PERL_DECL_ARGS_1(int value) { return SWIG_From_long SWIG_PERL_CALL_ARGS_1(value); } #include #if !defined(SWIG_NO_LLONG_MAX) # if !defined(LLONG_MAX) && defined(__GNUC__) && defined (__LONG_LONG_MAX__) # define LLONG_MAX __LONG_LONG_MAX__ # define LLONG_MIN (-LLONG_MAX - 1LL) # define ULLONG_MAX (LLONG_MAX * 2ULL + 1ULL) # endif #endif SWIGINTERN int SWIG_AsVal_double SWIG_PERL_DECL_ARGS_2(SV *obj, double *val) { if (SvNIOK(obj)) { if (val) *val = SvNV(obj); return SWIG_OK; } else if (SvIOK(obj)) { if (val) *val = (double) SvIV(obj); return SWIG_AddCast(SWIG_OK); } else { const char *nptr = SvPV_nolen(obj); if (nptr) { char *endptr; double v = strtod(nptr, &endptr); if (errno == ERANGE) { errno = 0; return SWIG_OverflowError; } else { if (*endptr == '\0') { if (val) *val = v; return SWIG_Str2NumCast(SWIG_OK); } } } } return SWIG_TypeError; } #include #include SWIGINTERNINLINE int SWIG_CanCastAsInteger(double *d, double min, double max) { double x = *d; if ((min <= x && x <= max)) { double fx = floor(x); double cx = ceil(x); double rd = ((x - fx) < 0.5) ? fx : cx; /* simple rint */ if ((errno == EDOM) || (errno == ERANGE)) { errno = 0; } else { double summ, reps, diff; if (rd < x) { diff = x - rd; } else if (rd > x) { diff = rd - x; } else { return 1; } summ = rd + x; reps = diff/summ; if (reps < 8*DBL_EPSILON) { *d = rd; return 1; } } } return 0; } SWIGINTERN int SWIG_AsVal_long SWIG_PERL_DECL_ARGS_2(SV *obj, long* val) { if (SvIOK(obj)) { if (val) *val = SvIV(obj); return SWIG_OK; } else { int dispatch = 0; const char *nptr = SvPV_nolen(obj); if (nptr) { char *endptr; long v; errno = 0; v = strtol(nptr, &endptr,0); if (errno == ERANGE) { errno = 0; return SWIG_OverflowError; } else { if (*endptr == '\0') { if (val) *val = v; return SWIG_Str2NumCast(SWIG_OK); } } } if (!dispatch) { double d; int res = SWIG_AddCast(SWIG_AsVal_double SWIG_PERL_CALL_ARGS_2(obj,&d)); if (SWIG_IsOK(res) && SWIG_CanCastAsInteger(&d, LONG_MIN, LONG_MAX)) { if (val) *val = (long)(d); return res; } } } return SWIG_TypeError; } SWIGINTERN int SWIG_AsVal_int SWIG_PERL_DECL_ARGS_2(SV * obj, int *val) { long v; int res = SWIG_AsVal_long SWIG_PERL_CALL_ARGS_2(obj, &v); if (SWIG_IsOK(res)) { if ((v < INT_MIN || v > INT_MAX)) { return SWIG_OverflowError; } else { if (val) *val = (int)(v); } } return res; } SWIGINTERN swig_type_info* SWIG_pchar_descriptor(void) { static int init = 0; static swig_type_info* info = 0; if (!init) { info = SWIG_TypeQuery("_p_char"); init = 1; } return info; } SWIGINTERN int SWIG_AsCharPtrAndSize(SV *obj, char** cptr, size_t* psize, int *alloc) { if (SvPOK(obj)) { STRLEN len = 0; char *cstr = SvPV(obj, len); size_t size = len + 1; if (cptr) { if (alloc) { if (*alloc == SWIG_NEWOBJ) { *cptr = (char *)memcpy((char *)malloc((size)*sizeof(char)), cstr, sizeof(char)*(size)); } else { *cptr = cstr; *alloc = SWIG_OLDOBJ; } } } if (psize) *psize = size; return SWIG_OK; } else { swig_type_info* pchar_descriptor = SWIG_pchar_descriptor(); if (pchar_descriptor) { char* vptr = 0; if (SWIG_ConvertPtr(obj, (void**)&vptr, pchar_descriptor, 0) == SWIG_OK) { if (cptr) *cptr = vptr; if (psize) *psize = vptr ? (strlen(vptr) + 1) : 0; if (alloc) *alloc = SWIG_OLDOBJ; return SWIG_OK; } } } return SWIG_TypeError; } SWIGINTERN obexftp_client_t *new_obexftp_client_t(int transport){ return obexftp_open(transport, NULL, NULL, NULL); } SWIGINTERN void delete_obexftp_client_t(obexftp_client_t *self){ obexftp_close(self); } SWIGINTERN void obexftp_client_t_callback(obexftp_client_t *self,obexftp_info_cb_t infocb,void *user_data){ self->infocb = infocb; self->infocb_data = user_data; } SWIGINTERN char **obexftp_client_t_discover(obexftp_client_t *self){ return obexftp_discover(self->transport); } SWIGINTERN int obexftp_client_t_connect(obexftp_client_t *self,char *device,int port,char *src){ return obexftp_connect_src(self, src, device, port, UUID_FBS, sizeof(UUID_FBS)); } SWIGINTERN int obexftp_client_t_connectpush(obexftp_client_t *self,char *device,int port,char *src){ self->quirks &= ~OBEXFTP_SPLIT_SETPATH; return obexftp_connect_src(self, src, device, port, NULL, 0); } SWIGINTERN int obexftp_client_t_connectsync(obexftp_client_t *self,char *device,int port,char *src){ self->quirks &= ~OBEXFTP_SPLIT_SETPATH; return obexftp_connect_src(self, src, device, port, UUID_IRMC, sizeof(UUID_IRMC)); } SWIGINTERN int obexftp_client_t_disconnect(obexftp_client_t *self){ return obexftp_disconnect(self); } SWIGINTERN int obexftp_client_t_chpath(obexftp_client_t *self,char *name){ return obexftp_setpath(self, name, 0); } SWIGINTERN int obexftp_client_t_mkpath(obexftp_client_t *self,char *name){ return obexftp_setpath(self, name, 1); } SWIGINTERN int obexftp_client_t_cdup(obexftp_client_t *self){ return obexftp_setpath(self, NULL, 0); } SWIGINTERN int obexftp_client_t_cdtop(obexftp_client_t *self){ return obexftp_setpath(self, "", 0); } SWIGINTERN char *obexftp_client_t_get(obexftp_client_t *self,char *path){ (void) obexftp_get_type(self, NULL, NULL, path); return (char *)self->buf_data; } SWIGINTERN char *obexftp_client_t_list(obexftp_client_t *self,char *path){ (void) obexftp_get_type(self, XOBEX_LISTING, NULL, path); return (char *)self->buf_data; } SWIGINTERN char *obexftp_client_t_get_capability(obexftp_client_t *self,char *path){ (void) obexftp_get_type(self, XOBEX_CAPABILITY, NULL, path); return (char *)self->buf_data; } SWIGINTERN int obexftp_client_t_get_file(obexftp_client_t *self,char *path,char *localname){ return obexftp_get_type(self, NULL, localname, path); } SWIGINTERN int obexftp_client_t_put_file(obexftp_client_t *self,char *filename,char *remotename){ return obexftp_put_file(self, filename, remotename); } SWIGINTERN int SWIG_AsVal_unsigned_SS_long SWIG_PERL_DECL_ARGS_2(SV *obj, unsigned long *val) { if (SvUOK(obj)) { if (val) *val = SvUV(obj); return SWIG_OK; } else if (SvIOK(obj)) { long v = SvIV(obj); if (v >= 0) { if (val) *val = v; return SWIG_OK; } else { return SWIG_OverflowError; } } else { int dispatch = 0; const char *nptr = SvPV_nolen(obj); if (nptr) { char *endptr; unsigned long v; errno = 0; v = strtoul(nptr, &endptr,0); if (errno == ERANGE) { errno = 0; return SWIG_OverflowError; } else { if (*endptr == '\0') { if (val) *val = v; return SWIG_Str2NumCast(SWIG_OK); } } } if (!dispatch) { double d; int res = SWIG_AddCast(SWIG_AsVal_double SWIG_PERL_CALL_ARGS_2(obj,&d)); if (SWIG_IsOK(res) && SWIG_CanCastAsInteger(&d, 0, ULONG_MAX)) { if (val) *val = (unsigned long)(d); return res; } } } return SWIG_TypeError; } SWIGINTERNINLINE int SWIG_AsVal_size_t SWIG_PERL_DECL_ARGS_2(SV * obj, size_t *val) { unsigned long v; int res = SWIG_AsVal_unsigned_SS_long SWIG_PERL_CALL_ARGS_2(obj, val ? &v : 0); if (SWIG_IsOK(res) && val) *val = (size_t)(v); return res; } SWIGINTERN int obexftp_client_t_put_data(obexftp_client_t *self,char *data,size_t size,char *remotename){ return obexftp_put_data(self, data, size, remotename); } SWIGINTERN int obexftp_client_t_delete(obexftp_client_t *self,char *name){ return obexftp_del(self, name); } #ifdef __cplusplus extern "C" { #endif #ifdef PERL_OBJECT #define MAGIC_CLASS _wrap_OBEXFTP_var:: class _wrap_OBEXFTP_var : public CPerlObj { public: #else #define MAGIC_CLASS #endif SWIGCLASS_STATIC int swig_magic_readonly(pTHX_ SV *SWIGUNUSEDPARM(sv), MAGIC *SWIGUNUSEDPARM(mg)) { MAGIC_PPERL croak("Value is read-only."); return 0; } #ifdef PERL_OBJECT }; #endif #ifdef __cplusplus } #endif #ifdef __cplusplus extern "C" { #endif XS(_wrap_discover) { { int arg1 ; char **result = 0 ; int val1 ; int ecode1 = 0 ; int argvi = 0; dXSARGS; if ((items < 1) || (items > 1)) { SWIG_croak("Usage: discover(transport);"); } ecode1 = SWIG_AsVal_int SWIG_PERL_CALL_ARGS_2(ST(0), &val1); if (!SWIG_IsOK(ecode1)) { SWIG_exception_fail(SWIG_ArgError(ecode1), "in method '" "discover" "', argument " "1"" of type '" "int""'"); } arg1 = (int)(val1); result = (char **)obexftp_discover(arg1); { char **p; AV *myav = newAV(); for (p = result; p && *p; p++) av_push(myav, newSVpv(*p, 0)); ST(argvi) = newRV_noinc((SV*)myav); sv_2mortal(ST(argvi)); argvi++; } XSRETURN(argvi); fail: SWIG_croak_null(); } } XS(_wrap_browsebt) { { char *arg1 = (char *) 0 ; int arg2 ; int result; int res1 ; char *buf1 = 0 ; int alloc1 = 0 ; int val2 ; int ecode2 = 0 ; int argvi = 0; dXSARGS; if ((items < 2) || (items > 2)) { SWIG_croak("Usage: browsebt(addr,service);"); } res1 = SWIG_AsCharPtrAndSize(ST(0), &buf1, NULL, &alloc1); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "browsebt" "', argument " "1"" of type '" "char *""'"); } arg1 = (char *)(buf1); ecode2 = SWIG_AsVal_int SWIG_PERL_CALL_ARGS_2(ST(1), &val2); if (!SWIG_IsOK(ecode2)) { SWIG_exception_fail(SWIG_ArgError(ecode2), "in method '" "browsebt" "', argument " "2"" of type '" "int""'"); } arg2 = (int)(val2); result = (int)obexftp_browse_bt(arg1,arg2); ST(argvi) = SWIG_From_int SWIG_PERL_CALL_ARGS_1((int)(result)); argvi++ ; if (alloc1 == SWIG_NEWOBJ) free((char*)buf1); XSRETURN(argvi); fail: if (alloc1 == SWIG_NEWOBJ) free((char*)buf1); SWIG_croak_null(); } } XS(_wrap_new_client) { { int arg1 ; obexftp_client_t *result = 0 ; int val1 ; int ecode1 = 0 ; int argvi = 0; dXSARGS; if ((items < 1) || (items > 1)) { SWIG_croak("Usage: new_client(transport);"); } ecode1 = SWIG_AsVal_int SWIG_PERL_CALL_ARGS_2(ST(0), &val1); if (!SWIG_IsOK(ecode1)) { SWIG_exception_fail(SWIG_ArgError(ecode1), "in method '" "new_client" "', argument " "1"" of type '" "int""'"); } arg1 = (int)(val1); result = (obexftp_client_t *)new_obexftp_client_t(arg1); ST(argvi) = SWIG_NewPointerObj(SWIG_as_voidptr(result), SWIGTYPE_p_obexftp_client_t, SWIG_OWNER | SWIG_SHADOW); argvi++ ; XSRETURN(argvi); fail: SWIG_croak_null(); } } XS(_wrap_delete_client) { { obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; void *argp1 = 0 ; int res1 = 0 ; int argvi = 0; dXSARGS; if ((items < 1) || (items > 1)) { SWIG_croak("Usage: delete_client(self);"); } res1 = SWIG_ConvertPtr(ST(0), &argp1,SWIGTYPE_p_obexftp_client_t, SWIG_POINTER_DISOWN | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "delete_client" "', argument " "1"" of type '" "obexftp_client_t *""'"); } arg1 = (obexftp_client_t *)(argp1); delete_obexftp_client_t(arg1); XSRETURN(argvi); fail: SWIG_croak_null(); } } XS(_wrap_client_callback) { { obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; obexftp_info_cb_t arg2 ; void *arg3 = (void *) 0 ; void *argp1 = 0 ; int res1 = 0 ; void *argp2 ; int res2 = 0 ; int res3 ; int argvi = 0; dXSARGS; if ((items < 3) || (items > 3)) { SWIG_croak("Usage: client_callback(self,infocb,user_data);"); } res1 = SWIG_ConvertPtr(ST(0), &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "client_callback" "', argument " "1"" of type '" "obexftp_client_t *""'"); } arg1 = (obexftp_client_t *)(argp1); { res2 = SWIG_ConvertPtr(ST(1), &argp2, SWIGTYPE_p_obexftp_info_cb_t, 0 ); if (!SWIG_IsOK(res2)) { SWIG_exception_fail(SWIG_ArgError(res2), "in method '" "client_callback" "', argument " "2"" of type '" "obexftp_info_cb_t""'"); } if (!argp2) { SWIG_exception_fail(SWIG_ValueError, "invalid null reference " "in method '" "client_callback" "', argument " "2"" of type '" "obexftp_info_cb_t""'"); } else { arg2 = *((obexftp_info_cb_t *)(argp2)); } } res3 = SWIG_ConvertPtr(ST(2),SWIG_as_voidptrptr(&arg3), 0, 0); if (!SWIG_IsOK(res3)) { SWIG_exception_fail(SWIG_ArgError(res3), "in method '" "client_callback" "', argument " "3"" of type '" "void *""'"); } obexftp_client_t_callback(arg1,arg2,arg3); XSRETURN(argvi); fail: SWIG_croak_null(); } } XS(_wrap_client_discover) { { obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; char **result = 0 ; void *argp1 = 0 ; int res1 = 0 ; int argvi = 0; dXSARGS; if ((items < 1) || (items > 1)) { SWIG_croak("Usage: client_discover(self);"); } res1 = SWIG_ConvertPtr(ST(0), &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "client_discover" "', argument " "1"" of type '" "obexftp_client_t *""'"); } arg1 = (obexftp_client_t *)(argp1); result = (char **)obexftp_client_t_discover(arg1); { char **p; AV *myav = newAV(); for (p = result; p && *p; p++) av_push(myav, newSVpv(*p, 0)); ST(argvi) = newRV_noinc((SV*)myav); sv_2mortal(ST(argvi)); argvi++; } XSRETURN(argvi); fail: SWIG_croak_null(); } } XS(_wrap_client_connect) { { obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; char *arg2 = (char *) 0 ; int arg3 ; char *arg4 = (char *) NULL ; int result; void *argp1 = 0 ; int res1 = 0 ; int res2 ; char *buf2 = 0 ; int alloc2 = 0 ; int val3 ; int ecode3 = 0 ; int res4 ; char *buf4 = 0 ; int alloc4 = 0 ; int argvi = 0; dXSARGS; if ((items < 3) || (items > 4)) { SWIG_croak("Usage: client_connect(self,device,port,src);"); } res1 = SWIG_ConvertPtr(ST(0), &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "client_connect" "', argument " "1"" of type '" "obexftp_client_t *""'"); } arg1 = (obexftp_client_t *)(argp1); res2 = SWIG_AsCharPtrAndSize(ST(1), &buf2, NULL, &alloc2); if (!SWIG_IsOK(res2)) { SWIG_exception_fail(SWIG_ArgError(res2), "in method '" "client_connect" "', argument " "2"" of type '" "char *""'"); } arg2 = (char *)(buf2); ecode3 = SWIG_AsVal_int SWIG_PERL_CALL_ARGS_2(ST(2), &val3); if (!SWIG_IsOK(ecode3)) { SWIG_exception_fail(SWIG_ArgError(ecode3), "in method '" "client_connect" "', argument " "3"" of type '" "int""'"); } arg3 = (int)(val3); if (items > 3) { res4 = SWIG_AsCharPtrAndSize(ST(3), &buf4, NULL, &alloc4); if (!SWIG_IsOK(res4)) { SWIG_exception_fail(SWIG_ArgError(res4), "in method '" "client_connect" "', argument " "4"" of type '" "char *""'"); } arg4 = (char *)(buf4); } result = (int)obexftp_client_t_connect(arg1,arg2,arg3,arg4); ST(argvi) = SWIG_From_int SWIG_PERL_CALL_ARGS_1((int)(result)); argvi++ ; if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); if (alloc4 == SWIG_NEWOBJ) free((char*)buf4); XSRETURN(argvi); fail: if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); if (alloc4 == SWIG_NEWOBJ) free((char*)buf4); SWIG_croak_null(); } } XS(_wrap_client_connectpush) { { obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; char *arg2 = (char *) 0 ; int arg3 ; char *arg4 = (char *) NULL ; int result; void *argp1 = 0 ; int res1 = 0 ; int res2 ; char *buf2 = 0 ; int alloc2 = 0 ; int val3 ; int ecode3 = 0 ; int res4 ; char *buf4 = 0 ; int alloc4 = 0 ; int argvi = 0; dXSARGS; if ((items < 3) || (items > 4)) { SWIG_croak("Usage: client_connectpush(self,device,port,src);"); } res1 = SWIG_ConvertPtr(ST(0), &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "client_connectpush" "', argument " "1"" of type '" "obexftp_client_t *""'"); } arg1 = (obexftp_client_t *)(argp1); res2 = SWIG_AsCharPtrAndSize(ST(1), &buf2, NULL, &alloc2); if (!SWIG_IsOK(res2)) { SWIG_exception_fail(SWIG_ArgError(res2), "in method '" "client_connectpush" "', argument " "2"" of type '" "char *""'"); } arg2 = (char *)(buf2); ecode3 = SWIG_AsVal_int SWIG_PERL_CALL_ARGS_2(ST(2), &val3); if (!SWIG_IsOK(ecode3)) { SWIG_exception_fail(SWIG_ArgError(ecode3), "in method '" "client_connectpush" "', argument " "3"" of type '" "int""'"); } arg3 = (int)(val3); if (items > 3) { res4 = SWIG_AsCharPtrAndSize(ST(3), &buf4, NULL, &alloc4); if (!SWIG_IsOK(res4)) { SWIG_exception_fail(SWIG_ArgError(res4), "in method '" "client_connectpush" "', argument " "4"" of type '" "char *""'"); } arg4 = (char *)(buf4); } result = (int)obexftp_client_t_connectpush(arg1,arg2,arg3,arg4); ST(argvi) = SWIG_From_int SWIG_PERL_CALL_ARGS_1((int)(result)); argvi++ ; if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); if (alloc4 == SWIG_NEWOBJ) free((char*)buf4); XSRETURN(argvi); fail: if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); if (alloc4 == SWIG_NEWOBJ) free((char*)buf4); SWIG_croak_null(); } } XS(_wrap_client_connectsync) { { obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; char *arg2 = (char *) 0 ; int arg3 ; char *arg4 = (char *) NULL ; int result; void *argp1 = 0 ; int res1 = 0 ; int res2 ; char *buf2 = 0 ; int alloc2 = 0 ; int val3 ; int ecode3 = 0 ; int res4 ; char *buf4 = 0 ; int alloc4 = 0 ; int argvi = 0; dXSARGS; if ((items < 3) || (items > 4)) { SWIG_croak("Usage: client_connectsync(self,device,port,src);"); } res1 = SWIG_ConvertPtr(ST(0), &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "client_connectsync" "', argument " "1"" of type '" "obexftp_client_t *""'"); } arg1 = (obexftp_client_t *)(argp1); res2 = SWIG_AsCharPtrAndSize(ST(1), &buf2, NULL, &alloc2); if (!SWIG_IsOK(res2)) { SWIG_exception_fail(SWIG_ArgError(res2), "in method '" "client_connectsync" "', argument " "2"" of type '" "char *""'"); } arg2 = (char *)(buf2); ecode3 = SWIG_AsVal_int SWIG_PERL_CALL_ARGS_2(ST(2), &val3); if (!SWIG_IsOK(ecode3)) { SWIG_exception_fail(SWIG_ArgError(ecode3), "in method '" "client_connectsync" "', argument " "3"" of type '" "int""'"); } arg3 = (int)(val3); if (items > 3) { res4 = SWIG_AsCharPtrAndSize(ST(3), &buf4, NULL, &alloc4); if (!SWIG_IsOK(res4)) { SWIG_exception_fail(SWIG_ArgError(res4), "in method '" "client_connectsync" "', argument " "4"" of type '" "char *""'"); } arg4 = (char *)(buf4); } result = (int)obexftp_client_t_connectsync(arg1,arg2,arg3,arg4); ST(argvi) = SWIG_From_int SWIG_PERL_CALL_ARGS_1((int)(result)); argvi++ ; if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); if (alloc4 == SWIG_NEWOBJ) free((char*)buf4); XSRETURN(argvi); fail: if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); if (alloc4 == SWIG_NEWOBJ) free((char*)buf4); SWIG_croak_null(); } } XS(_wrap_client_disconnect) { { obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; int result; void *argp1 = 0 ; int res1 = 0 ; int argvi = 0; dXSARGS; if ((items < 1) || (items > 1)) { SWIG_croak("Usage: client_disconnect(self);"); } res1 = SWIG_ConvertPtr(ST(0), &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "client_disconnect" "', argument " "1"" of type '" "obexftp_client_t *""'"); } arg1 = (obexftp_client_t *)(argp1); result = (int)obexftp_client_t_disconnect(arg1); ST(argvi) = SWIG_From_int SWIG_PERL_CALL_ARGS_1((int)(result)); argvi++ ; XSRETURN(argvi); fail: SWIG_croak_null(); } } XS(_wrap_client_chpath) { { obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; char *arg2 = (char *) 0 ; int result; void *argp1 = 0 ; int res1 = 0 ; int res2 ; char *buf2 = 0 ; int alloc2 = 0 ; int argvi = 0; dXSARGS; if ((items < 2) || (items > 2)) { SWIG_croak("Usage: client_chpath(self,name);"); } res1 = SWIG_ConvertPtr(ST(0), &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "client_chpath" "', argument " "1"" of type '" "obexftp_client_t *""'"); } arg1 = (obexftp_client_t *)(argp1); res2 = SWIG_AsCharPtrAndSize(ST(1), &buf2, NULL, &alloc2); if (!SWIG_IsOK(res2)) { SWIG_exception_fail(SWIG_ArgError(res2), "in method '" "client_chpath" "', argument " "2"" of type '" "char *""'"); } arg2 = (char *)(buf2); result = (int)obexftp_client_t_chpath(arg1,arg2); ST(argvi) = SWIG_From_int SWIG_PERL_CALL_ARGS_1((int)(result)); argvi++ ; if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); XSRETURN(argvi); fail: if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); SWIG_croak_null(); } } XS(_wrap_client_mkpath) { { obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; char *arg2 = (char *) 0 ; int result; void *argp1 = 0 ; int res1 = 0 ; int res2 ; char *buf2 = 0 ; int alloc2 = 0 ; int argvi = 0; dXSARGS; if ((items < 2) || (items > 2)) { SWIG_croak("Usage: client_mkpath(self,name);"); } res1 = SWIG_ConvertPtr(ST(0), &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "client_mkpath" "', argument " "1"" of type '" "obexftp_client_t *""'"); } arg1 = (obexftp_client_t *)(argp1); res2 = SWIG_AsCharPtrAndSize(ST(1), &buf2, NULL, &alloc2); if (!SWIG_IsOK(res2)) { SWIG_exception_fail(SWIG_ArgError(res2), "in method '" "client_mkpath" "', argument " "2"" of type '" "char *""'"); } arg2 = (char *)(buf2); result = (int)obexftp_client_t_mkpath(arg1,arg2); ST(argvi) = SWIG_From_int SWIG_PERL_CALL_ARGS_1((int)(result)); argvi++ ; if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); XSRETURN(argvi); fail: if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); SWIG_croak_null(); } } XS(_wrap_client_cdup) { { obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; int result; void *argp1 = 0 ; int res1 = 0 ; int argvi = 0; dXSARGS; if ((items < 1) || (items > 1)) { SWIG_croak("Usage: client_cdup(self);"); } res1 = SWIG_ConvertPtr(ST(0), &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "client_cdup" "', argument " "1"" of type '" "obexftp_client_t *""'"); } arg1 = (obexftp_client_t *)(argp1); result = (int)obexftp_client_t_cdup(arg1); ST(argvi) = SWIG_From_int SWIG_PERL_CALL_ARGS_1((int)(result)); argvi++ ; XSRETURN(argvi); fail: SWIG_croak_null(); } } XS(_wrap_client_cdtop) { { obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; int result; void *argp1 = 0 ; int res1 = 0 ; int argvi = 0; dXSARGS; if ((items < 1) || (items > 1)) { SWIG_croak("Usage: client_cdtop(self);"); } res1 = SWIG_ConvertPtr(ST(0), &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "client_cdtop" "', argument " "1"" of type '" "obexftp_client_t *""'"); } arg1 = (obexftp_client_t *)(argp1); result = (int)obexftp_client_t_cdtop(arg1); ST(argvi) = SWIG_From_int SWIG_PERL_CALL_ARGS_1((int)(result)); argvi++ ; XSRETURN(argvi); fail: SWIG_croak_null(); } } XS(_wrap_client_get) { { obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; char *arg2 = (char *) 0 ; char *result = 0 ; void *argp1 = 0 ; int res1 = 0 ; int res2 ; char *buf2 = 0 ; int alloc2 = 0 ; int argvi = 0; dXSARGS; if ((items < 2) || (items > 2)) { SWIG_croak("Usage: client_get(self,path);"); } res1 = SWIG_ConvertPtr(ST(0), &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "client_get" "', argument " "1"" of type '" "obexftp_client_t *""'"); } arg1 = (obexftp_client_t *)(argp1); res2 = SWIG_AsCharPtrAndSize(ST(1), &buf2, NULL, &alloc2); if (!SWIG_IsOK(res2)) { SWIG_exception_fail(SWIG_ArgError(res2), "in method '" "client_get" "', argument " "2"" of type '" "char *""'"); } arg2 = (char *)(buf2); result = (char *)obexftp_client_t_get(arg1,arg2); { ST(argvi) = newSVpvn(arg1->buf_data, arg1->buf_size); argvi++; } if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); XSRETURN(argvi); fail: if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); SWIG_croak_null(); } } XS(_wrap_client_list) { { obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; char *arg2 = (char *) NULL ; char *result = 0 ; void *argp1 = 0 ; int res1 = 0 ; int res2 ; char *buf2 = 0 ; int alloc2 = 0 ; int argvi = 0; dXSARGS; if ((items < 1) || (items > 2)) { SWIG_croak("Usage: client_list(self,path);"); } res1 = SWIG_ConvertPtr(ST(0), &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "client_list" "', argument " "1"" of type '" "obexftp_client_t *""'"); } arg1 = (obexftp_client_t *)(argp1); if (items > 1) { res2 = SWIG_AsCharPtrAndSize(ST(1), &buf2, NULL, &alloc2); if (!SWIG_IsOK(res2)) { SWIG_exception_fail(SWIG_ArgError(res2), "in method '" "client_list" "', argument " "2"" of type '" "char *""'"); } arg2 = (char *)(buf2); } result = (char *)obexftp_client_t_list(arg1,arg2); { ST(argvi) = newSVpvn(arg1->buf_data, arg1->buf_size); argvi++; } if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); XSRETURN(argvi); fail: if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); SWIG_croak_null(); } } XS(_wrap_client_get_capability) { { obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; char *arg2 = (char *) NULL ; char *result = 0 ; void *argp1 = 0 ; int res1 = 0 ; int res2 ; char *buf2 = 0 ; int alloc2 = 0 ; int argvi = 0; dXSARGS; if ((items < 1) || (items > 2)) { SWIG_croak("Usage: client_get_capability(self,path);"); } res1 = SWIG_ConvertPtr(ST(0), &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "client_get_capability" "', argument " "1"" of type '" "obexftp_client_t *""'"); } arg1 = (obexftp_client_t *)(argp1); if (items > 1) { res2 = SWIG_AsCharPtrAndSize(ST(1), &buf2, NULL, &alloc2); if (!SWIG_IsOK(res2)) { SWIG_exception_fail(SWIG_ArgError(res2), "in method '" "client_get_capability" "', argument " "2"" of type '" "char *""'"); } arg2 = (char *)(buf2); } result = (char *)obexftp_client_t_get_capability(arg1,arg2); { ST(argvi) = newSVpvn(arg1->buf_data, arg1->buf_size); argvi++; } if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); XSRETURN(argvi); fail: if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); SWIG_croak_null(); } } XS(_wrap_client_get_file) { { obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; char *arg2 = (char *) 0 ; char *arg3 = (char *) 0 ; int result; void *argp1 = 0 ; int res1 = 0 ; int res2 ; char *buf2 = 0 ; int alloc2 = 0 ; int res3 ; char *buf3 = 0 ; int alloc3 = 0 ; int argvi = 0; dXSARGS; if ((items < 3) || (items > 3)) { SWIG_croak("Usage: client_get_file(self,path,localname);"); } res1 = SWIG_ConvertPtr(ST(0), &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "client_get_file" "', argument " "1"" of type '" "obexftp_client_t *""'"); } arg1 = (obexftp_client_t *)(argp1); res2 = SWIG_AsCharPtrAndSize(ST(1), &buf2, NULL, &alloc2); if (!SWIG_IsOK(res2)) { SWIG_exception_fail(SWIG_ArgError(res2), "in method '" "client_get_file" "', argument " "2"" of type '" "char *""'"); } arg2 = (char *)(buf2); res3 = SWIG_AsCharPtrAndSize(ST(2), &buf3, NULL, &alloc3); if (!SWIG_IsOK(res3)) { SWIG_exception_fail(SWIG_ArgError(res3), "in method '" "client_get_file" "', argument " "3"" of type '" "char *""'"); } arg3 = (char *)(buf3); result = (int)obexftp_client_t_get_file(arg1,arg2,arg3); ST(argvi) = SWIG_From_int SWIG_PERL_CALL_ARGS_1((int)(result)); argvi++ ; if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); if (alloc3 == SWIG_NEWOBJ) free((char*)buf3); XSRETURN(argvi); fail: if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); if (alloc3 == SWIG_NEWOBJ) free((char*)buf3); SWIG_croak_null(); } } XS(_wrap_client_put_file) { { obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; char *arg2 = (char *) 0 ; char *arg3 = (char *) NULL ; int result; void *argp1 = 0 ; int res1 = 0 ; int res2 ; char *buf2 = 0 ; int alloc2 = 0 ; int res3 ; char *buf3 = 0 ; int alloc3 = 0 ; int argvi = 0; dXSARGS; if ((items < 2) || (items > 3)) { SWIG_croak("Usage: client_put_file(self,filename,remotename);"); } res1 = SWIG_ConvertPtr(ST(0), &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "client_put_file" "', argument " "1"" of type '" "obexftp_client_t *""'"); } arg1 = (obexftp_client_t *)(argp1); res2 = SWIG_AsCharPtrAndSize(ST(1), &buf2, NULL, &alloc2); if (!SWIG_IsOK(res2)) { SWIG_exception_fail(SWIG_ArgError(res2), "in method '" "client_put_file" "', argument " "2"" of type '" "char *""'"); } arg2 = (char *)(buf2); if (items > 2) { res3 = SWIG_AsCharPtrAndSize(ST(2), &buf3, NULL, &alloc3); if (!SWIG_IsOK(res3)) { SWIG_exception_fail(SWIG_ArgError(res3), "in method '" "client_put_file" "', argument " "3"" of type '" "char *""'"); } arg3 = (char *)(buf3); } result = (int)obexftp_client_t_put_file(arg1,arg2,arg3); ST(argvi) = SWIG_From_int SWIG_PERL_CALL_ARGS_1((int)(result)); argvi++ ; if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); if (alloc3 == SWIG_NEWOBJ) free((char*)buf3); XSRETURN(argvi); fail: if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); if (alloc3 == SWIG_NEWOBJ) free((char*)buf3); SWIG_croak_null(); } } XS(_wrap_client_put_data) { { obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; char *arg2 = (char *) 0 ; size_t arg3 ; char *arg4 = (char *) NULL ; int result; void *argp1 = 0 ; int res1 = 0 ; int res4 ; char *buf4 = 0 ; int alloc4 = 0 ; int argvi = 0; dXSARGS; if ((items < 2) || (items > 3)) { SWIG_croak("Usage: client_put_data(self,data,size,remotename);"); } res1 = SWIG_ConvertPtr(ST(0), &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "client_put_data" "', argument " "1"" of type '" "obexftp_client_t *""'"); } arg1 = (obexftp_client_t *)(argp1); { /* Danger Wil Robinson */ arg2 = SvPV(ST(1),arg3); } if (items > 2) { res4 = SWIG_AsCharPtrAndSize(ST(2), &buf4, NULL, &alloc4); if (!SWIG_IsOK(res4)) { SWIG_exception_fail(SWIG_ArgError(res4), "in method '" "client_put_data" "', argument " "4"" of type '" "char *""'"); } arg4 = (char *)(buf4); } result = (int)obexftp_client_t_put_data(arg1,arg2,arg3,arg4); ST(argvi) = SWIG_From_int SWIG_PERL_CALL_ARGS_1((int)(result)); argvi++ ; if (alloc4 == SWIG_NEWOBJ) free((char*)buf4); XSRETURN(argvi); fail: if (alloc4 == SWIG_NEWOBJ) free((char*)buf4); SWIG_croak_null(); } } XS(_wrap_client_delete) { { obexftp_client_t *arg1 = (obexftp_client_t *) 0 ; char *arg2 = (char *) 0 ; int result; void *argp1 = 0 ; int res1 = 0 ; int res2 ; char *buf2 = 0 ; int alloc2 = 0 ; int argvi = 0; dXSARGS; if ((items < 2) || (items > 2)) { SWIG_croak("Usage: client_delete(self,name);"); } res1 = SWIG_ConvertPtr(ST(0), &argp1,SWIGTYPE_p_obexftp_client_t, 0 | 0 ); if (!SWIG_IsOK(res1)) { SWIG_exception_fail(SWIG_ArgError(res1), "in method '" "client_delete" "', argument " "1"" of type '" "obexftp_client_t *""'"); } arg1 = (obexftp_client_t *)(argp1); res2 = SWIG_AsCharPtrAndSize(ST(1), &buf2, NULL, &alloc2); if (!SWIG_IsOK(res2)) { SWIG_exception_fail(SWIG_ArgError(res2), "in method '" "client_delete" "', argument " "2"" of type '" "char *""'"); } arg2 = (char *)(buf2); result = (int)obexftp_client_t_delete(arg1,arg2); ST(argvi) = SWIG_From_int SWIG_PERL_CALL_ARGS_1((int)(result)); argvi++ ; if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); XSRETURN(argvi); fail: if (alloc2 == SWIG_NEWOBJ) free((char*)buf2); SWIG_croak_null(); } } /* -------- TYPE CONVERSION AND EQUIVALENCE RULES (BEGIN) -------- */ static swig_type_info _swigt__p_char = {"_p_char", "char *", 0, 0, (void*)0, 0}; static swig_type_info _swigt__p_obexftp_client_t = {"_p_obexftp_client_t", "obexftp_client_t *", 0, 0, (void*)"OBEXFTP::client", 0}; static swig_type_info _swigt__p_obexftp_info_cb_t = {"_p_obexftp_info_cb_t", "obexftp_info_cb_t *", 0, 0, (void*)0, 0}; static swig_type_info *swig_type_initial[] = { &_swigt__p_char, &_swigt__p_obexftp_client_t, &_swigt__p_obexftp_info_cb_t, }; static swig_cast_info _swigc__p_char[] = { {&_swigt__p_char, 0, 0, 0},{0, 0, 0, 0}}; static swig_cast_info _swigc__p_obexftp_client_t[] = { {&_swigt__p_obexftp_client_t, 0, 0, 0},{0, 0, 0, 0}}; static swig_cast_info _swigc__p_obexftp_info_cb_t[] = { {&_swigt__p_obexftp_info_cb_t, 0, 0, 0},{0, 0, 0, 0}}; static swig_cast_info *swig_cast_initial[] = { _swigc__p_char, _swigc__p_obexftp_client_t, _swigc__p_obexftp_info_cb_t, }; /* -------- TYPE CONVERSION AND EQUIVALENCE RULES (END) -------- */ static swig_constant_info swig_constants[] = { {0,0,0,0,0,0} }; #ifdef __cplusplus } #endif static swig_variable_info swig_variables[] = { {0,0,0,0} }; static swig_command_info swig_commands[] = { {"OBEXFTPc::discover", _wrap_discover}, {"OBEXFTPc::browsebt", _wrap_browsebt}, {"OBEXFTPc::new_client", _wrap_new_client}, {"OBEXFTPc::delete_client", _wrap_delete_client}, {"OBEXFTPc::client_callback", _wrap_client_callback}, {"OBEXFTPc::client_discover", _wrap_client_discover}, {"OBEXFTPc::client_connect", _wrap_client_connect}, {"OBEXFTPc::client_connectpush", _wrap_client_connectpush}, {"OBEXFTPc::client_connectsync", _wrap_client_connectsync}, {"OBEXFTPc::client_disconnect", _wrap_client_disconnect}, {"OBEXFTPc::client_chpath", _wrap_client_chpath}, {"OBEXFTPc::client_mkpath", _wrap_client_mkpath}, {"OBEXFTPc::client_cdup", _wrap_client_cdup}, {"OBEXFTPc::client_cdtop", _wrap_client_cdtop}, {"OBEXFTPc::client_get", _wrap_client_get}, {"OBEXFTPc::client_list", _wrap_client_list}, {"OBEXFTPc::client_get_capability", _wrap_client_get_capability}, {"OBEXFTPc::client_get_file", _wrap_client_get_file}, {"OBEXFTPc::client_put_file", _wrap_client_put_file}, {"OBEXFTPc::client_put_data", _wrap_client_put_data}, {"OBEXFTPc::client_delete", _wrap_client_delete}, {0,0} }; /* ----------------------------------------------------------------------------- * Type initialization: * This problem is tough by the requirement that no dynamic * memory is used. Also, since swig_type_info structures store pointers to * swig_cast_info structures and swig_cast_info structures store pointers back * to swig_type_info structures, we need some lookup code at initialization. * The idea is that swig generates all the structures that are needed. * The runtime then collects these partially filled structures. * The SWIG_InitializeModule function takes these initial arrays out of * swig_module, and does all the lookup, filling in the swig_module.types * array with the correct data and linking the correct swig_cast_info * structures together. * * The generated swig_type_info structures are assigned staticly to an initial * array. We just loop through that array, and handle each type individually. * First we lookup if this type has been already loaded, and if so, use the * loaded structure instead of the generated one. Then we have to fill in the * cast linked list. The cast data is initially stored in something like a * two-dimensional array. Each row corresponds to a type (there are the same * number of rows as there are in the swig_type_initial array). Each entry in * a column is one of the swig_cast_info structures for that type. * The cast_initial array is actually an array of arrays, because each row has * a variable number of columns. So to actually build the cast linked list, * we find the array of casts associated with the type, and loop through it * adding the casts to the list. The one last trick we need to do is making * sure the type pointer in the swig_cast_info struct is correct. * * First off, we lookup the cast->type name to see if it is already loaded. * There are three cases to handle: * 1) If the cast->type has already been loaded AND the type we are adding * casting info to has not been loaded (it is in this module), THEN we * replace the cast->type pointer with the type pointer that has already * been loaded. * 2) If BOTH types (the one we are adding casting info to, and the * cast->type) are loaded, THEN the cast info has already been loaded by * the previous module so we just ignore it. * 3) Finally, if cast->type has not already been loaded, then we add that * swig_cast_info to the linked list (because the cast->type) pointer will * be correct. * ----------------------------------------------------------------------------- */ #ifdef __cplusplus extern "C" { #if 0 } /* c-mode */ #endif #endif #if 0 #define SWIGRUNTIME_DEBUG #endif SWIGRUNTIME void SWIG_InitializeModule(void *clientdata) { size_t i; swig_module_info *module_head, *iter; int found; clientdata = clientdata; /* check to see if the circular list has been setup, if not, set it up */ if (swig_module.next==0) { /* Initialize the swig_module */ swig_module.type_initial = swig_type_initial; swig_module.cast_initial = swig_cast_initial; swig_module.next = &swig_module; } /* Try and load any already created modules */ module_head = SWIG_GetModule(clientdata); if (!module_head) { /* This is the first module loaded for this interpreter */ /* so set the swig module into the interpreter */ SWIG_SetModule(clientdata, &swig_module); module_head = &swig_module; } else { /* the interpreter has loaded a SWIG module, but has it loaded this one? */ found=0; iter=module_head; do { if (iter==&swig_module) { found=1; break; } iter=iter->next; } while (iter!= module_head); /* if the is found in the list, then all is done and we may leave */ if (found) return; /* otherwise we must add out module into the list */ swig_module.next = module_head->next; module_head->next = &swig_module; } /* Now work on filling in swig_module.types */ #ifdef SWIGRUNTIME_DEBUG printf("SWIG_InitializeModule: size %d\n", swig_module.size); #endif for (i = 0; i < swig_module.size; ++i) { swig_type_info *type = 0; swig_type_info *ret; swig_cast_info *cast; #ifdef SWIGRUNTIME_DEBUG printf("SWIG_InitializeModule: type %d %s\n", i, swig_module.type_initial[i]->name); #endif /* if there is another module already loaded */ if (swig_module.next != &swig_module) { type = SWIG_MangledTypeQueryModule(swig_module.next, &swig_module, swig_module.type_initial[i]->name); } if (type) { /* Overwrite clientdata field */ #ifdef SWIGRUNTIME_DEBUG printf("SWIG_InitializeModule: found type %s\n", type->name); #endif if (swig_module.type_initial[i]->clientdata) { type->clientdata = swig_module.type_initial[i]->clientdata; #ifdef SWIGRUNTIME_DEBUG printf("SWIG_InitializeModule: found and overwrite type %s \n", type->name); #endif } } else { type = swig_module.type_initial[i]; } /* Insert casting types */ cast = swig_module.cast_initial[i]; while (cast->type) { /* Don't need to add information already in the list */ ret = 0; #ifdef SWIGRUNTIME_DEBUG printf("SWIG_InitializeModule: look cast %s\n", cast->type->name); #endif if (swig_module.next != &swig_module) { ret = SWIG_MangledTypeQueryModule(swig_module.next, &swig_module, cast->type->name); #ifdef SWIGRUNTIME_DEBUG if (ret) printf("SWIG_InitializeModule: found cast %s\n", ret->name); #endif } if (ret) { if (type == swig_module.type_initial[i]) { #ifdef SWIGRUNTIME_DEBUG printf("SWIG_InitializeModule: skip old type %s\n", ret->name); #endif cast->type = ret; ret = 0; } else { /* Check for casting already in the list */ swig_cast_info *ocast = SWIG_TypeCheck(ret->name, type); #ifdef SWIGRUNTIME_DEBUG if (ocast) printf("SWIG_InitializeModule: skip old cast %s\n", ret->name); #endif if (!ocast) ret = 0; } } if (!ret) { #ifdef SWIGRUNTIME_DEBUG printf("SWIG_InitializeModule: adding cast %s\n", cast->type->name); #endif if (type->cast) { type->cast->prev = cast; cast->next = type->cast; } type->cast = cast; } cast++; } /* Set entry in modules->types array equal to the type */ swig_module.types[i] = type; } swig_module.types[i] = 0; #ifdef SWIGRUNTIME_DEBUG printf("**** SWIG_InitializeModule: Cast List ******\n"); for (i = 0; i < swig_module.size; ++i) { int j = 0; swig_cast_info *cast = swig_module.cast_initial[i]; printf("SWIG_InitializeModule: type %d %s\n", i, swig_module.type_initial[i]->name); while (cast->type) { printf("SWIG_InitializeModule: cast type %s\n", cast->type->name); cast++; ++j; } printf("---- Total casts: %d\n",j); } printf("**** SWIG_InitializeModule: Cast List ******\n"); #endif } /* This function will propagate the clientdata field of type to * any new swig_type_info structures that have been added into the list * of equivalent types. It is like calling * SWIG_TypeClientData(type, clientdata) a second time. */ SWIGRUNTIME void SWIG_PropagateClientData(void) { size_t i; swig_cast_info *equiv; static int init_run = 0; if (init_run) return; init_run = 1; for (i = 0; i < swig_module.size; i++) { if (swig_module.types[i]->clientdata) { equiv = swig_module.types[i]->cast; while (equiv) { if (!equiv->converter) { if (equiv->type && !equiv->type->clientdata) SWIG_TypeClientData(equiv->type, swig_module.types[i]->clientdata); } equiv = equiv->next; } } } } #ifdef __cplusplus #if 0 { /* c-mode */ #endif } #endif #ifdef __cplusplus extern "C" #endif XS(SWIG_init) { dXSARGS; int i; SWIG_InitializeModule(0); /* Install commands */ for (i = 0; swig_commands[i].name; i++) { newXS((char*) swig_commands[i].name,swig_commands[i].wrapper, (char*)__FILE__); } /* Install variables */ for (i = 0; swig_variables[i].name; i++) { SV *sv; sv = get_sv((char*) swig_variables[i].name, TRUE | 0x2); if (swig_variables[i].type) { SWIG_MakePtr(sv,(void *)1, *swig_variables[i].type,0); } else { sv_setiv(sv,(IV) 0); } swig_create_magic(sv, (char *) swig_variables[i].name, swig_variables[i].set, swig_variables[i].get); } /* Install constant */ for (i = 0; swig_constants[i].type; i++) { SV *sv; sv = get_sv((char*)swig_constants[i].name, TRUE | 0x2); switch(swig_constants[i].type) { case SWIG_INT: sv_setiv(sv, (IV) swig_constants[i].lvalue); break; case SWIG_FLOAT: sv_setnv(sv, (double) swig_constants[i].dvalue); break; case SWIG_STRING: sv_setpv(sv, (char *) swig_constants[i].pvalue); break; case SWIG_POINTER: SWIG_MakePtr(sv, swig_constants[i].pvalue, *(swig_constants[i].ptype),0); break; case SWIG_BINARY: SWIG_MakePackedObj(sv, swig_constants[i].pvalue, swig_constants[i].lvalue, *(swig_constants[i].ptype)); break; default: break; } SvREADONLY_on(sv); } /*@SWIG:/usr/share/swig1.3/perl5/perltypemaps.swg,64,%set_constant@*/ do { SV *sv = get_sv((char*) SWIG_prefix "IRDA", TRUE | 0x2); sv_setsv(sv, SWIG_From_int SWIG_PERL_CALL_ARGS_1((int)(OBEX_TRANS_IRDA))); SvREADONLY_on(sv); } while(0) /*@SWIG@*/; /*@SWIG:/usr/share/swig1.3/perl5/perltypemaps.swg,64,%set_constant@*/ do { SV *sv = get_sv((char*) SWIG_prefix "INET", TRUE | 0x2); sv_setsv(sv, SWIG_From_int SWIG_PERL_CALL_ARGS_1((int)(OBEX_TRANS_INET))); SvREADONLY_on(sv); } while(0) /*@SWIG@*/; /*@SWIG:/usr/share/swig1.3/perl5/perltypemaps.swg,64,%set_constant@*/ do { SV *sv = get_sv((char*) SWIG_prefix "CABLE", TRUE | 0x2); sv_setsv(sv, SWIG_From_int SWIG_PERL_CALL_ARGS_1((int)(OBEX_TRANS_CUSTOM))); SvREADONLY_on(sv); } while(0) /*@SWIG@*/; /*@SWIG:/usr/share/swig1.3/perl5/perltypemaps.swg,64,%set_constant@*/ do { SV *sv = get_sv((char*) SWIG_prefix "BLUETOOTH", TRUE | 0x2); sv_setsv(sv, SWIG_From_int SWIG_PERL_CALL_ARGS_1((int)(OBEX_TRANS_BLUETOOTH))); SvREADONLY_on(sv); } while(0) /*@SWIG@*/; /*@SWIG:/usr/share/swig1.3/perl5/perltypemaps.swg,64,%set_constant@*/ do { SV *sv = get_sv((char*) SWIG_prefix "USB", TRUE | 0x2); sv_setsv(sv, SWIG_From_int SWIG_PERL_CALL_ARGS_1((int)(OBEX_TRANS_USB))); SvREADONLY_on(sv); } while(0) /*@SWIG@*/; /*@SWIG:/usr/share/swig1.3/perl5/perltypemaps.swg,64,%set_constant@*/ do { SV *sv = get_sv((char*) SWIG_prefix "SYNC", TRUE | 0x2); sv_setsv(sv, SWIG_From_int SWIG_PERL_CALL_ARGS_1((int)(OBEX_SYNC_SERVICE))); SvREADONLY_on(sv); } while(0) /*@SWIG@*/; /*@SWIG:/usr/share/swig1.3/perl5/perltypemaps.swg,64,%set_constant@*/ do { SV *sv = get_sv((char*) SWIG_prefix "PUSH", TRUE | 0x2); sv_setsv(sv, SWIG_From_int SWIG_PERL_CALL_ARGS_1((int)(OBEX_PUSH_SERVICE))); SvREADONLY_on(sv); } while(0) /*@SWIG@*/; /*@SWIG:/usr/share/swig1.3/perl5/perltypemaps.swg,64,%set_constant@*/ do { SV *sv = get_sv((char*) SWIG_prefix "FTP", TRUE | 0x2); sv_setsv(sv, SWIG_From_int SWIG_PERL_CALL_ARGS_1((int)(OBEX_FTP_SERVICE))); SvREADONLY_on(sv); } while(0) /*@SWIG@*/; SWIG_TypeClientData(SWIGTYPE_p_obexftp_client_t, (void*) "OBEXFTP::client"); ST(0) = &PL_sv_yes; XSRETURN(1); } obexftp-0.23/swig/client.i0000644000076600000240000001110611146600644012427 00000000000000/* * obexftp/client.i: ObexFTP client library SWIG interface * * Copyright (c) 2005 Christian W. Zuckschwerdt * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the Free * Software Foundation; either version 2 of the License, or (at your option) * any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License * for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * */ /* perl croaks if this is lowercase. override for every other binding. */ %module OBEXFTP %{ #include #include %} %include "charmap.i" %constant int IRDA = OBEX_TRANS_IRDA; %constant int INET = OBEX_TRANS_INET; %constant int CABLE = OBEX_TRANS_CUSTOM; %constant int BLUETOOTH = OBEX_TRANS_BLUETOOTH; %constant int USB = OBEX_TRANS_USB; %constant int SYNC = OBEX_SYNC_SERVICE; %constant int PUSH = OBEX_PUSH_SERVICE; %constant int FTP = OBEX_FTP_SERVICE; %rename(discover) obexftp_discover; char **obexftp_discover(int transport); %rename(browsebt) obexftp_browse_bt; int obexftp_browse_bt(char *addr, int service); #if defined SWIGPERL #elif defined SWIGPYTHON %typemap(in) (obexftp_info_cb_t infocb, void *user_data) { if (!PyCallable_Check($input)) { /* should raise an exception here */ $1 = NULL; $2 = NULL; } else { Py_XINCREF($input); $1 = proxy_info_cb; $2 = $input; } }; %{ static void proxy_info_cb (int evt, const char *buf, int len, void *data) { PyObject *proc = (PyObject *)data; /* PyObject *msg = PyString_FromStringAndSize(buf, len); */ PyObject_CallFunction(proc, "is", evt, buf); } %} #elif defined SWIGRUBY %typemap(in) (obexftp_info_cb_t infocb, void *user_data) { $1 = proxy_info_cb; $2 = $input; }; %{ static void proxy_info_cb (int event, const char *buf, int len, void *data) { VALUE proc = (VALUE)data; VALUE msg = buf ? rb_str_new(buf, len) : Qnil; rb_funcall(proc, rb_intern("call"), 2, INT2NUM(event), msg); } %} #elif defined SWIGTCL #else #warning "no callbacks for this language" #endif /* Which binding wants this capitalized too? */ %rename(client) obexftp_client_t; #ifdef SWIGRUBY %rename(Client) obexftp_client_t; #endif typedef struct { } obexftp_client_t; %extend obexftp_client_t { obexftp_client_t(int transport) { return obexftp_open(transport, NULL, NULL, NULL); } ~obexftp_client_t() { obexftp_close(self); } void callback(obexftp_info_cb_t infocb, void *user_data) { self->infocb = infocb; self->infocb_data = user_data; } char **discover() { return obexftp_discover(self->transport); } int connect(char *device, int port, char *src=NULL) { return obexftp_connect_src(self, src, device, port, UUID_FBS, sizeof(UUID_FBS)); } int connectpush(char *device, int port, char *src=NULL) { self->quirks &= ~OBEXFTP_SPLIT_SETPATH; return obexftp_connect_src(self, src, device, port, NULL, 0); } int connectsync(char *device, int port, char *src=NULL) { self->quirks &= ~OBEXFTP_SPLIT_SETPATH; return obexftp_connect_src(self, src, device, port, UUID_IRMC, sizeof(UUID_IRMC)); } int disconnect() { return obexftp_disconnect(self); } int chpath(char *name) { return obexftp_setpath(self, name, 0); } int mkpath(char *name) { return obexftp_setpath(self, name, 1); } int cdup() { return obexftp_setpath(self, NULL, 0); } int cdtop() { return obexftp_setpath(self, "", 0); } char *get(char *path) { (void) obexftp_get_type(self, NULL, NULL, path); return (char *)self->buf_data; } char *list(char *path=NULL) { (void) obexftp_get_type(self, XOBEX_LISTING, NULL, path); return (char *)self->buf_data; } char *get_capability(char *path=NULL) { (void) obexftp_get_type(self, XOBEX_CAPABILITY, NULL, path); return (char *)self->buf_data; } int get_file(char *path, char *localname) { return obexftp_get_type(self, NULL, localname, path); } int put_file(char *filename, char *remotename=NULL) { return obexftp_put_file(self, filename, remotename); } int put_data(char *data, size_t size, char *remotename=NULL) { return obexftp_put_data(self, data, size, remotename); } int delete(char *name) { return obexftp_del(self, name); } } obexftp-0.23/TODO0000644000076600000240000000054211146600644010520 00000000000000ObexFTP to do list ================== * verify memory alloc's with bindings * cancel (async?) support for bindings * obexftp.is_connected() perhaps? * get perl and ruby to uninstall for distcheck (only python and tcl distcheck clean) * put to specified file (-p file.vcf -f telecom/pb.vcf) * Discover port and protocol to use (i.e. Bt, IrDA, TTY) obexftp-0.23/ChangeLog0000644000076600000240000002643011146603257011611 00000000000000ObexFTP 0.23 (released 2009-02-17) ---------------------------------- * allow win32 to use hci src names * adding a simpler connect wrapper * show OBEX_HandleInput errors * catch errors and let the user know * print timeout stats if available * sdp unregister more verbose * upgrading btkit * fix for win32 without bt * replacing deprecated automake vars * sizeof() fixes * removing bdaddr_t reference from obexftpd.c * adding bootstrap helper * concurrency bug in extconf.rb generated Makefile (fix by Alin Năstac) * switching from POD to asciidoc * clearing gnu-style implicit rules ObexFTP 0.22 (released 2008-06-15) ---------------------------------- * added proper unicode support * added support for transparent OBEX-over-AT mode * rewritten at-command function * added specific error messages * refactored to flexible bt_kit layer * fixed cache root duplicates * fixed off-by-one and unfreed mem in cache layer * added pkg-config file * added example code * switched to doxygen * added python binding callbacks * portable packed structs * enabled linux hci dev names for source selection * Python binding uses distutils now, tested by Adam Williamson * removed exit from bt discovery * Better autodetection for possible language bindings * reworked win32 support * Motorola SLVR L2 cobex fix by Andrey Rahmatullin * now using AC_HELP_STRING for compat with autoconf <=2.57 * added hci selection support, drafted by Manuel Naranjo * switched obexftp cli to new discovery api * prefer PCSUITE over FTP, req. by Martin Storsjö for Series 60 2nd Ed. * fixed compile error with >=swig-1.3.28 * renamed sdp browse function * fixed month/day swapping in atotime, spotted by Dr. Johannes Zellner * added BFC compatibility for newer Siemens phones * added PCSOFTWARE uuid support for SHARP phones * added motorola support * end bfb mode properly * added CPROT=0 support from 3GPP 27.007 * fixed ericsson init * fixed invalid conn_id in disconnect rep. by Alan J. McFarlane * better create flag handling in setpath * Changed LDADD to LIBADD sug. by Sergey Vlasov * obexftpd clean up by Hendrik Sattler * 64-bit fixes by Hendrik Sattler * Removed all (dangerous) obex_headerdata_t casts * Reorganized all swig-dependant Makefiles * Applied cobex write patch from Simon Ruggier * Applied from Frode Isaksen ObexFTP 0.21 (released 2006-06-27) ---------------------------------- 2006-05-26 Christian W. Zuckschwerdt * Fixes to obexftpd suggested by Hendrik Sattler 2006-05-24 Christian W. Zuckschwerdt * Added ruby binding * Added preliminary discovery function ObexFTP 0.20 (released 2006-05-16) ---------------------------------- 2006-05-16 Christian W. Zuckschwerdt * Change __S_IFDIR to S_IFDIR with fallback sug. by Alex Kanavin * Added old CLI switches and documentation sug. by Hendrik Sattler 2006-04-26 Christian W. Zuckschwerdt * Fixed the -g CLI switch (bug reported by many people) 2006-03-08 Christian W. Zuckschwerdt * Added obexfsd written by Alan Zhang * Fixed iconv (found by Stanislav Nikolov) 2006-03-07 Christian W. Zuckschwerdt * device/channel code cleanup ObexFTP 0.19 (released 2006-02-08) ---------------------------------- 2006-02-08 Christian W. Zuckschwerdt * Updated for OpenOBEX 1.1 (pkg-config) 2006-01-26 Christian W. Zuckschwerdt * Added --output switch by Daniel Burr/Andrzej Szombierski. 2006-01-21 Christian W. Zuckschwerdt * Simplified the swig/perl/Makefile.am. ObexFTP 0.18 (released 2006-01-18) ---------------------------------- 2006-01-11 Christian W. Zuckschwerdt * Fixed a pointer typo and a free() typo. 2005-12-12 Christian W. Zuckschwerdt * Added perl, python and tcl binding with swig. 2005-09-15 Christian W. Zuckschwerdt * Quick iconv hack. Needs to be done in openobex. 2005-09-14 Christian W. Zuckschwerdt * Rewrote folder-listing parser to enhance compatibility 2005-09-12 Christian W. Zuckschwerdt * Connection headers by Philip Kovacs 2005-08-06 Christian W. Zuckschwerdt * Nokia hack (suppressing FBS) * Capabilty retrieving by Marco Canini 2005-06-27 Christian W. Zuckschwerdt * USB support, mainly by Daniel Burr 2005-06-19 Christian W. Zuckschwerdt * Added implicit setpath support in every function. 2005-06-11 Christian W. Zuckschwerdt * Fixed quoting problem. Lets hope this wont break libtool. 2005-06-10 Christian W. Zuckschwerdt * Added simple caching * Removed recursive put. Apps should implement it themselves. 2005-06-09 Christian W. Zuckschwerdt * New configure flag to enable building docs (disabled by default now) 2005-03-23 Christian W. Zuckschwerdt * Security fix suggested by Kevin Finisterre 2005-03-21 Christian W. Zuckschwerdt * GCC 2.96 compat fixes by Paul Boddie 2005-01-15 Christian W. Zuckschwerdt * Documentation updated by Hendrik Sattler 2005-01-10 Christian W. Zuckschwerdt * Typo fix to setpath by Olivier Berger * Removed some BT ifdefs by Hendrik Sattler * Use VERSION macro suggested by Andrej Kacian ObexFTP 0.17 (released 2004-12-17) ---------------------------------- 2004-12-17 Christian W. Zuckschwerdt * Added sdp lib checks, reported by George Styles and Johan Debal 2004-12-12 Christian W. Zuckschwerdt * Fixed do_at_cmd, reported by Donald Burns 2004-11-21 Christian W. Zuckschwerdt * Bluetooth device and channel auto-discovery ObexFTP 0.16 (released 2004-11-23) ---------------------------------- 2004-11-20 Christian W. Zuckschwerdt * FreeBSD patch by Bruce Simpson 2004-11-19 Christian W. Zuckschwerdt * Bug fixes (for Sony-Ericsson) by David Haslam ObexFTP 0.15 (released 2004-11-13) ---------------------------------- 2004-11-12 Christian W. Zuckschwerdt * Don't send S45 UUID first (broke other phones too, sorry S45 users) 2004-11-10 Christian W. Zuckschwerdt * Fixed linebreaks in contributed backup script. ObexFTP 0.14 (released 2004-09-26) ---------------------------------- 2004-09-26 Christian W. Zuckschwerdt * Moved vmo converter into a seperate package 2004-09-05 Christian W. Zuckschwerdt * Serial-USB converter fix, Gerhard Reithofer 2004-08-10 Christian W. Zuckschwerdt * Uploads discard path info now. 2004-07-25 Christian W. Zuckschwerdt * Added support for Sony-Ericsson phones, debian Bug#261328 2004-06-11 Christian W. Zuckschwerdt * Version option added 2004-03-05 Christian W. Zuckschwerdt * NetBSD portability patch by Soren S. Jorvang 2004-02-04 Christian W. Zuckschwerdt * Skip transports not linked, François Fleuret 2004-01-30 Christian W. Zuckschwerdt * IrCOMM 1-line show stopper fixed by Stefan Behnel 2003-12-28 Christian W. Zuckschwerdt * setpath patch for T610 by Adam Goode 2003-10-22 Christian W. Zuckschwerdt * bfb_write_packets patch by Jorge Ventura * connection setup fixes (cobex) 2003-10-01 Christian W. Zuckschwerdt * Bluetooth support 2003-09-24 Christian W. Zuckschwerdt * Ericsson phones are now working with the unified cobex. * removed the automatic directory parsing, please just the -c switch. * Shuffled the option names for obexftp to counter missunderstandings. 2003-07-18 Christian W. Zuckschwerdt * fixed a Makefile bug reported by Carwyn Edwards ObexFTP 0.13 (released 2003-04-11) ---------------------------------- 2003-04-11 Christian W. Zuckschwerdt * all but data output goes to stderr now (suggested by Heiko) * The environment variable OBEXFTP_PORT is used as a default. ObexFTP 0.12 (released 2003-02-17) ---------------------------------- 2003-02-17 Christian W. Zuckschwerdt * Added vmo converters (suggested by Dmitry Zakharov) 2003-02-11 Christian W. Zuckschwerdt * Added UUID fallback for C55 (suggested by Hristo Todorov) ObexFTP 0.11 (released 2003-01-26) ---------------------------------- 2003-01-26 Christian W. Zuckschwerdt * Unified BFB and PE; 2003-01-19 Christian W. Zuckschwerdt * C++ compatible header files (suggested Carsten Pfeiffer) ObexFTP 0.10 (released 2003-01-10) ---------------------------------- 2003-01-09 Christian W. Zuckschwerdt * Big file transmission problem solved 2002-11-22 Christian W. Zuckschwerdt * Jan Metz supplied me with his RH8 box and some SL45i connected to it. Finally S45(i) is working. 2002-11-19 Christian W. Zuckschwerdt * this is the last release to support OpenOBEX 0.9.8 2002-11-14 Christian W. Zuckschwerdt * Removed glib dependancy * win32 target is working (tested with mingw) 2002-10-17 Christian W. Zuckschwerdt * Removed Siemens references in favor of OBEX enabled devices * Enhancements for upcoming OpenOBEX 1.0.0 2002-04-29 Christian W. Zuckschwerdt * Erricsson T39m support, req. by Ole Streicher 2002-03-04 Christian W. Zuckschwerdt * Try harder to connect. IRDA needs patience. * Wrote a man page. Should really be a docbook refentry. ObexFTP 0.9 (released 2002-02-18) --------------------------------- ObexFTP 0.8 (released 2002-02-14) --------------------------------- ObexFTP 0.7 (released 2002-02-13) --------------------------------- ObexFTP 0.6 (released 2002-02-12) --------------------------------- ObexFTP 0.5 (released 2002-02-11) --------------------------------- 2002-02-11 Christian W. Zuckschwerdt * cobex now capable of asynch operation ObexFTP 0.4 (released 2002-02-09) --------------------------------- 2002-02-09 Christian W. Zuckschwerdt * Rewrote main using getopt. ObexFTP 0.3 (released 2002-02-08) --------------------------------- 2002-02-08 Christian W. Zuckschwerdt * Fixed BFB protocol (Code 0x01 is ACK not PREPARE...). 2002-02-07 Christian W. Zuckschwerdt * Implemented BFB protocol. ObexFTP 0.2 (released 2002-01-19) --------------------------------- 2002-01-19 Christian W. Zuckschwerdt * Implemented delete and rename. ObexFTP 0.1 (released 2002-01-18) --------------------------------- 2002-01-18 Christian W. Zuckschwerdt * Initial beta. * It's work in progress so expect errors and report/fix then! obexftp-0.23/Doxyfile.coverpage0000644000076600000240000000755611146600644013524 00000000000000/** \mainpage \section intro_sec Introduction ObexFTP implements the Object Exchange (OBEX) file transfer feature for clients and servers. The standard is defined in more detail in section K12.5 (Profiles: OBEX FTP) in Bluetooth V1.1 Profile Specifications. ObexFTP works out-of-the-box with all transports supported by OpenOBEX. Currently there is IrDA, Bluetooth, USB and network (TCP) transport support. ObexFTP also comes with ready to use custom transport support for many mobile phones serial cables. It's well tested with Siemens and Sony/Ericsson mobile phones. But then most Motorola and Sharp (generic) as well as Samsung phones will work too, please contact the author if not. This ObexFTP distribution contains libraries as well as some applications. Applications to access e.g. Flex. Memory and Multimedia- /Secure Digital Card memory on mobile equipment: - obexftp - all in one client application (heavy on options) - Symlinks to obexftp for default operations: - obexls - list the mobiles contents - obexget - copy files(s) to mobile - obexput - copy files(s) from mobile - obexrm - remove files on the mobile - obexftpd - obex ftp server application (experimental) Applications to hack Siemens mobile equipment using datalink cable - bfb_keysim - simulate key presses on the mobile - bfb_eeprom - list and examine the user eeprom on the mobile Library parts to be used in other applications - obexftp - high level abstraction of OBEX FTP (SYNC, PUSH also) protocol - multicobex - cable OBEX support for many phones (i.e. Siemens BFB and BFC Sony/Ericsson, Motorola and generic (Sharp) modes) - bfb - Siemens mobile datalink cable protocol layer \section install_sec Short Installation Instructions To compile and install: \verbatim # ./configure # make # make install (as superuser) \endverbatim If you plan to use a Siemens x45 or x55 series (e.g. S45 or C55, not S65) use \verbatim CFLAGS="$CFLAGS -DCOMPAT_S45" ./configure \endverbatim instead Consider using pedantic error checking: \verbatim CFLAGS="$CFLAGS -Werror" ./configure \endverbatim If compiling doesn't work, try to disable some of the language bindings on configure. \verbatim --disable-perl --disable-python --disable-ruby --disable-tcl \endverbatim \section development_sec Further Development If this tool lacks support for your phone or just won't work quite right please let me know. Development will focus on your needs. This package lacks advanced examples using the bindings. There are some 3rd party GUIs and other projects like a obex file system though. Please see the OpenOBEX / ObexFTP web site for details. Developers are free to use the bindings as well as obexftp, multicobex and bfb libraries. Please join the mailing list and keep in touch - You'll recieve pre-releases and support. That way your application can benefit from the newest library features and further development can focus on your needs. \section debugging_sec Debugging remove all ObexFTP installations from your system. Build using \verbatim CFLAGS="-DOBEXFTP_DEBUG=5" ./configure make clean ; make \endverbatim Start debugging using \verbatim ./apps/obexftp [...] \endverbatim You might want to try picking up compiler warnings too (and mail them to me) \verbatim CFLAGS="$CFLAGS -g -Wall -Wmissing-declarations -Wmissing-prototypes \ -Werror" ./configure make clean ; make \endverbatim Please mail me all warnings and errors, if any. The bindings use language-native installers which are missing the uninstall targets. Our distcheck will boldly ignore those files. \section contact_sec Author and Contact Author: Christian W. Zuckschwerdt - http://dev.zuckschwerdt.org/openobex/ - http://openobex.sourceforge.net/ - http://sourceforge.net/tracker/?group_id=8960 - http://sourceforge.net/forum/?group_id=8960 */ obexftp-0.23/INSTALL0000644000076600000240000002243211146600665011066 00000000000000Installation Instructions ************************* Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005 Free Software Foundation, Inc. This file is free documentation; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. Basic Installation ================== These are generic installation instructions. The `configure' shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses those values to create a `Makefile' in each directory of the package. It may also create one or more `.h' files containing system-dependent definitions. Finally, it creates a shell script `config.status' that you can run in the future to recreate the current configuration, and a file `config.log' containing compiler output (useful mainly for debugging `configure'). It can also use an optional file (typically called `config.cache' and enabled with `--cache-file=config.cache' or simply `-C') that saves the results of its tests to speed up reconfiguring. (Caching is disabled by default to prevent problems with accidental use of stale cache files.) If you need to do unusual things to compile the package, please try to figure out how `configure' could check whether to do them, and mail diffs or instructions to the address given in the `README' so they can be considered for the next release. If you are using the cache, and at some point `config.cache' contains results you don't want to keep, you may remove or edit it. The file `configure.ac' (or `configure.in') is used to create `configure' by a program called `autoconf'. You only need `configure.ac' if you want to change it or regenerate `configure' using a newer version of `autoconf'. The simplest way to compile this package is: 1. `cd' to the directory containing the package's source code and type `./configure' to configure the package for your system. If you're using `csh' on an old version of System V, you might need to type `sh ./configure' instead to prevent `csh' from trying to execute `configure' itself. Running `configure' takes awhile. While running, it prints some messages telling which features it is checking for. 2. Type `make' to compile the package. 3. Optionally, type `make check' to run any self-tests that come with the package. 4. Type `make install' to install the programs and any data files and documentation. 5. You can remove the program binaries and object files from the source code directory by typing `make clean'. To also remove the files that `configure' created (so you can compile the package for a different kind of computer), type `make distclean'. There is also a `make maintainer-clean' target, but that is intended mainly for the package's developers. If you use it, you may have to get all sorts of other programs in order to regenerate files that came with the distribution. Compilers and Options ===================== Some systems require unusual options for compilation or linking that the `configure' script does not know about. Run `./configure --help' for details on some of the pertinent environment variables. You can give `configure' initial values for configuration parameters by setting variables in the command line or in the environment. Here is an example: ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix *Note Defining Variables::, for more details. Compiling For Multiple Architectures ==================================== You can compile the package for more than one kind of computer at the same time, by placing the object files for each architecture in their own directory. To do this, you must use a version of `make' that supports the `VPATH' variable, such as GNU `make'. `cd' to the directory where you want the object files and executables to go and run the `configure' script. `configure' automatically checks for the source code in the directory that `configure' is in and in `..'. If you have to use a `make' that does not support the `VPATH' variable, you have to compile the package for one architecture at a time in the source code directory. After you have installed the package for one architecture, use `make distclean' before reconfiguring for another architecture. Installation Names ================== By default, `make install' installs the package's commands under `/usr/local/bin', include files under `/usr/local/include', etc. You can specify an installation prefix other than `/usr/local' by giving `configure' the option `--prefix=PREFIX'. You can specify separate installation prefixes for architecture-specific files and architecture-independent files. If you pass the option `--exec-prefix=PREFIX' to `configure', the package uses PREFIX as the prefix for installing programs and libraries. Documentation and other data files still use the regular prefix. In addition, if you use an unusual directory layout you can give options like `--bindir=DIR' to specify different values for particular kinds of files. Run `configure --help' for a list of the directories you can set and what kinds of files go in them. If the package supports it, you can cause programs to be installed with an extra prefix or suffix on their names by giving `configure' the option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. Optional Features ================= Some packages pay attention to `--enable-FEATURE' options to `configure', where FEATURE indicates an optional part of the package. They may also pay attention to `--with-PACKAGE' options, where PACKAGE is something like `gnu-as' or `x' (for the X Window System). The `README' should mention any `--enable-' and `--with-' options that the package recognizes. For packages that use the X Window System, `configure' can usually find the X include and library files automatically, but if it doesn't, you can use the `configure' options `--x-includes=DIR' and `--x-libraries=DIR' to specify their locations. Specifying the System Type ========================== There may be some features `configure' cannot figure out automatically, but needs to determine by the type of machine the package will run on. Usually, assuming the package is built to be run on the _same_ architectures, `configure' can figure that out, but if it prints a message saying it cannot guess the machine type, give it the `--build=TYPE' option. TYPE can either be a short name for the system type, such as `sun4', or a canonical name which has the form: CPU-COMPANY-SYSTEM where SYSTEM can have one of these forms: OS KERNEL-OS See the file `config.sub' for the possible values of each field. If `config.sub' isn't included in this package, then this package doesn't need to know the machine type. If you are _building_ compiler tools for cross-compiling, you should use the option `--target=TYPE' to select the type of system they will produce code for. If you want to _use_ a cross compiler, that generates code for a platform different from the build platform, you should specify the "host" platform (i.e., that on which the generated programs will eventually be run) with `--host=TYPE'. Sharing Defaults ================ If you want to set default values for `configure' scripts to share, you can create a site shell script called `config.site' that gives default values for variables like `CC', `cache_file', and `prefix'. `configure' looks for `PREFIX/share/config.site' if it exists, then `PREFIX/etc/config.site' if it exists. Or, you can set the `CONFIG_SITE' environment variable to the location of the site script. A warning: not all `configure' scripts look for a site script. Defining Variables ================== Variables not defined in a site shell script can be set in the environment passed to `configure'. However, some packages may run configure again during the build, and the customized values of these variables may be lost. In order to avoid this problem, you should set them in the `configure' command line, using `VAR=value'. For example: ./configure CC=/usr/local2/bin/gcc causes the specified `gcc' to be used as the C compiler (unless it is overridden in the site shell script). Here is a another example: /bin/bash ./configure CONFIG_SHELL=/bin/bash Here the `CONFIG_SHELL=/bin/bash' operand causes subsequent configuration-related scripts to be executed by `/bin/bash'. `configure' Invocation ====================== `configure' recognizes the following options to control how it operates. `--help' `-h' Print a summary of the options to `configure', and exit. `--version' `-V' Print the version of Autoconf used to generate the `configure' script, and exit. `--cache-file=FILE' Enable the cache: use and save the results of the tests in FILE, traditionally `config.cache'. FILE defaults to `/dev/null' to disable caching. `--config-cache' `-C' Alias for `--cache-file=config.cache'. `--quiet' `--silent' `-q' Do not print messages saying which checks are being made. To suppress all normal output, redirect it to `/dev/null' (any error messages will still be shown). `--srcdir=DIR' Look for the package's source code in directory DIR. Usually `configure' can determine that directory automatically. `configure' also accepts some other, not widely useful, options. Run `configure --help' for more details. obexftp-0.23/Doxyfile0000644000076600000240000002367311146600644011550 00000000000000# Doxyfile 1.4.7 #--------------------------------------------------------------------------- # Project related configuration options #--------------------------------------------------------------------------- PROJECT_NAME = ObexFTP PROJECT_NUMBER = 0.22 OUTPUT_DIRECTORY = doc/api CREATE_SUBDIRS = NO OUTPUT_LANGUAGE = English BRIEF_MEMBER_DESC = YES REPEAT_BRIEF = YES ABBREVIATE_BRIEF = "The $name class" \ "The $name widget" \ "The $name file" \ is \ provides \ specifies \ contains \ represents \ a \ an \ the ALWAYS_DETAILED_SEC = NO INLINE_INHERITED_MEMB = NO FULL_PATH_NAMES = YES STRIP_FROM_PATH = STRIP_FROM_INC_PATH = SHORT_NAMES = NO JAVADOC_AUTOBRIEF = YES MULTILINE_CPP_IS_BRIEF = NO DETAILS_AT_TOP = NO INHERIT_DOCS = YES SEPARATE_MEMBER_PAGES = NO TAB_SIZE = 8 ALIASES = OPTIMIZE_OUTPUT_FOR_C = YES OPTIMIZE_OUTPUT_JAVA = NO BUILTIN_STL_SUPPORT = NO DISTRIBUTE_GROUP_DOC = NO SUBGROUPING = YES #--------------------------------------------------------------------------- # Build related configuration options #--------------------------------------------------------------------------- EXTRACT_ALL = YES EXTRACT_PRIVATE = NO EXTRACT_STATIC = NO EXTRACT_LOCAL_CLASSES = NO EXTRACT_LOCAL_METHODS = NO HIDE_UNDOC_MEMBERS = NO HIDE_UNDOC_CLASSES = NO HIDE_FRIEND_COMPOUNDS = NO HIDE_IN_BODY_DOCS = NO INTERNAL_DOCS = NO CASE_SENSE_NAMES = YES HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES INLINE_INFO = YES SORT_MEMBER_DOCS = YES SORT_BRIEF_DOCS = NO SORT_BY_SCOPE_NAME = NO GENERATE_TODOLIST = YES GENERATE_TESTLIST = YES GENERATE_BUGLIST = YES GENERATE_DEPRECATEDLIST= YES ENABLED_SECTIONS = MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES SHOW_DIRECTORIES = NO FILE_VERSION_FILTER = #--------------------------------------------------------------------------- # configuration options related to warning and progress messages #--------------------------------------------------------------------------- QUIET = NO WARNINGS = YES WARN_IF_UNDOCUMENTED = YES WARN_IF_DOC_ERROR = YES WARN_NO_PARAMDOC = NO WARN_FORMAT = "$file:$line: $text" WARN_LOGFILE = #--------------------------------------------------------------------------- # configuration options related to the input files #--------------------------------------------------------------------------- INPUT = bfb/bfb.c bfb/bfb.h \ multicobex/multi_cobex.c multicobex/multi_cobex.h \ obexftp/cache.c obexftp/client.c obexftp/client.h \ obexftp/obexftp.h obexftp/uuid.h \ Doxyfile.coverpage FILE_PATTERNS = *.c \ *.cc \ *.cxx \ *.cpp \ *.c++ \ *.d \ *.java \ *.ii \ *.ixx \ *.ipp \ *.i++ \ *.inl \ *.h \ *.hh \ *.hxx \ *.hpp \ *.h++ \ *.idl \ *.odl \ *.cs \ *.php \ *.php3 \ *.inc \ *.m \ *.mm \ *.dox \ *.py \ *.C \ *.CC \ *.C++ \ *.II \ *.I++ \ *.H \ *.HH \ *.H++ \ *.CS \ *.PHP \ *.PHP3 \ *.M \ *.MM \ *.PY RECURSIVE = NO EXCLUDE = EXCLUDE_SYMLINKS = NO EXCLUDE_PATTERNS = *_private.h EXAMPLE_PATH = EXAMPLE_PATTERNS = * EXAMPLE_RECURSIVE = NO IMAGE_PATH = INPUT_FILTER = FILTER_PATTERNS = FILTER_SOURCE_FILES = NO #--------------------------------------------------------------------------- # configuration options related to source browsing #--------------------------------------------------------------------------- SOURCE_BROWSER = NO INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES REFERENCED_BY_RELATION = NO REFERENCES_RELATION = NO REFERENCES_LINK_SOURCE = YES USE_HTAGS = NO VERBATIM_HEADERS = NO #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- ALPHABETICAL_INDEX = NO COLS_IN_ALPHA_INDEX = 5 IGNORE_PREFIX = #--------------------------------------------------------------------------- # configuration options related to the HTML output #--------------------------------------------------------------------------- GENERATE_HTML = YES HTML_OUTPUT = html HTML_FILE_EXTENSION = .html HTML_HEADER = HTML_FOOTER = HTML_STYLESHEET = HTML_ALIGN_MEMBERS = YES GENERATE_HTMLHELP = NO CHM_FILE = HHC_LOCATION = GENERATE_CHI = NO BINARY_TOC = NO TOC_EXPAND = NO DISABLE_INDEX = NO ENUM_VALUES_PER_LINE = 4 GENERATE_TREEVIEW = NO TREEVIEW_WIDTH = 250 #--------------------------------------------------------------------------- # configuration options related to the LaTeX output #--------------------------------------------------------------------------- GENERATE_LATEX = NO LATEX_OUTPUT = latex LATEX_CMD_NAME = latex MAKEINDEX_CMD_NAME = makeindex COMPACT_LATEX = NO PAPER_TYPE = a4wide EXTRA_PACKAGES = LATEX_HEADER = PDF_HYPERLINKS = NO USE_PDFLATEX = NO LATEX_BATCHMODE = NO LATEX_HIDE_INDICES = NO #--------------------------------------------------------------------------- # configuration options related to the RTF output #--------------------------------------------------------------------------- GENERATE_RTF = NO RTF_OUTPUT = rtf COMPACT_RTF = NO RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = RTF_EXTENSIONS_FILE = #--------------------------------------------------------------------------- # configuration options related to the man page output #--------------------------------------------------------------------------- GENERATE_MAN = YES MAN_OUTPUT = man MAN_EXTENSION = .3 MAN_LINKS = NO #--------------------------------------------------------------------------- # configuration options related to the XML output #--------------------------------------------------------------------------- GENERATE_XML = NO XML_OUTPUT = xml XML_SCHEMA = XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- GENERATE_AUTOGEN_DEF = NO #--------------------------------------------------------------------------- # configuration options related to the Perl module output #--------------------------------------------------------------------------- GENERATE_PERLMOD = NO PERLMOD_LATEX = NO PERLMOD_PRETTY = YES PERLMOD_MAKEVAR_PREFIX = #--------------------------------------------------------------------------- # Configuration options related to the preprocessor #--------------------------------------------------------------------------- ENABLE_PREPROCESSING = YES MACRO_EXPANSION = NO EXPAND_ONLY_PREDEF = NO SEARCH_INCLUDES = YES INCLUDE_PATH = INCLUDE_FILE_PATTERNS = PREDEFINED = EXPAND_AS_DEFINED = SKIP_FUNCTION_MACROS = YES #--------------------------------------------------------------------------- # Configuration::additions related to external references #--------------------------------------------------------------------------- TAGFILES = GENERATE_TAGFILE = ALLEXTERNALS = NO EXTERNAL_GROUPS = YES PERL_PATH = /usr/bin/perl #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- CLASS_DIAGRAMS = YES HIDE_UNDOC_RELATIONS = YES HAVE_DOT = NO CLASS_GRAPH = YES COLLABORATION_GRAPH = YES GROUP_GRAPHS = YES UML_LOOK = NO TEMPLATE_RELATIONS = NO INCLUDE_GRAPH = YES INCLUDED_BY_GRAPH = YES CALL_GRAPH = NO CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = YES DIRECTORY_GRAPH = YES DOT_IMAGE_FORMAT = png DOT_PATH = DOTFILE_DIRS = DOT_TRANSPARENT = NO DOT_MULTI_TARGETS = NO GENERATE_LEGEND = YES DOT_CLEANUP = YES #--------------------------------------------------------------------------- # Configuration::additions related to the search engine #--------------------------------------------------------------------------- SEARCHENGINE = NO obexftp-0.23/Makefile.in0000644000076600000240000005446211146600665012112 00000000000000# Makefile.in generated by automake 1.9.6 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = . am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ $(srcdir)/Makefile.in $(srcdir)/config.h.in \ $(srcdir)/obexftp.pc.in $(srcdir)/obexftp.spec.in \ $(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \ THANKS TODO compile config.guess config.rpath config.sub \ depcomp install-sh ltmain.sh missing subdir = . ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/iconv.m4 \ $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/acinclude.m4 \ $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno configure.status.lineno mkinstalldirs = $(install_sh) -d CONFIG_HEADER = config.h CONFIG_CLEAN_FILES = obexftp.spec obexftp.pc SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-exec-recursive install-info-recursive \ install-recursive installcheck-recursive installdirs-recursive \ pdf-recursive ps-recursive uninstall-info-recursive \ uninstall-recursive am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; am__installdirs = "$(DESTDIR)$(pkgconfigdir)" pkgconfigDATA_INSTALL = $(INSTALL_DATA) DATA = $(pkgconfig_DATA) ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ { test ! -d $(distdir) \ || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ && rm -fr $(distdir); }; } DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2 GZIP_ENV = --best distcleancheck_listfiles = find . -type f -print ACLOCAL = @ACLOCAL@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ BFB_VERSION = @BFB_VERSION@ BLUETOOTH_CFLAGS = @BLUETOOTH_CFLAGS@ BLUETOOTH_LIBS = @BLUETOOTH_LIBS@ BUILD_DOCS_FALSE = @BUILD_DOCS_FALSE@ BUILD_DOCS_TRUE = @BUILD_DOCS_TRUE@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DSYMUTIL = @DSYMUTIL@ ECHO = @ECHO@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ ENABLE_PERL_FALSE = @ENABLE_PERL_FALSE@ ENABLE_PERL_TRUE = @ENABLE_PERL_TRUE@ ENABLE_PYTHON_FALSE = @ENABLE_PYTHON_FALSE@ ENABLE_PYTHON_TRUE = @ENABLE_PYTHON_TRUE@ ENABLE_RUBY_FALSE = @ENABLE_RUBY_FALSE@ ENABLE_RUBY_TRUE = @ENABLE_RUBY_TRUE@ ENABLE_SWIG_FALSE = @ENABLE_SWIG_FALSE@ ENABLE_SWIG_TRUE = @ENABLE_SWIG_TRUE@ ENABLE_TCL_FALSE = @ENABLE_TCL_FALSE@ ENABLE_TCL_TRUE = @ENABLE_TCL_TRUE@ EXEEXT = @EXEEXT@ EXTRA_LIBS = @EXTRA_LIBS@ F77 = @F77@ FFLAGS = @FFLAGS@ GREP = @GREP@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LDFLAGS = @LDFLAGS@ LIBICONV = @LIBICONV@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LN_S = @LN_S@ LTLIBICONV = @LTLIBICONV@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MULTICOBEX_VERSION = @MULTICOBEX_VERSION@ NMEDIT = @NMEDIT@ OBEXFTP_VERSION = @OBEXFTP_VERSION@ OBJEXT = @OBJEXT@ OPENOBEX_CFLAGS = @OPENOBEX_CFLAGS@ OPENOBEX_LIBS = @OPENOBEX_LIBS@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ PKG_CONFIG = @PKG_CONFIG@ PYTHON = @PYTHON@ PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@ PYTHON_PLATFORM = @PYTHON_PLATFORM@ PYTHON_PREFIX = @PYTHON_PREFIX@ PYTHON_VERSION = @PYTHON_VERSION@ RANLIB = @RANLIB@ REQUIRES = @REQUIRES@ RUBY = @RUBY@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ SWIG = @SWIG@ SWIG_LIB = @SWIG_LIB@ TCLSH = @TCLSH@ VERSION = @VERSION@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_F77 = @ac_ct_F77@ ac_perl_enabled = @ac_perl_enabled@ ac_python_enabled = @ac_python_enabled@ ac_ruby_enabled = @ac_ruby_enabled@ ac_tcl_enabled = @ac_tcl_enabled@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ pkgpyexecdir = @pkgpyexecdir@ pkgpythondir = @pkgpythondir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ pyexecdir = @pyexecdir@ pythondir = @pythondir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ SUBDIRS = bfb multicobex obexftp apps doc examples swig ACLOCAL_AMFLAGS = -I m4 EXTRA_DIST = obexftp.spec.in \ obexftp.spec \ includes/common.h \ Doxyfile \ Doxyfile.developer \ Doxyfile.coverpage \ config.rpath pkgconfigdir = $(libdir)/pkgconfig pkgconfig_DATA = obexftp.pc # no uninstall for perl -- ignore it distuninstallcheck_listfiles = find . -type f \ -not -path \*/site_perl/\*/OBEXFTP\* \ -not -path \*/perl/\*/auto/OBEXFTP\* \ -not -name perllocal.pod \ -not -path \*site-packages/obexftp\* \ -not -path \*/site_ruby/\* \ -print all: config.h $(MAKE) $(AM_MAKEFLAGS) all-recursive .SUFFIXES: am--refresh: @: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \ cd $(srcdir) && $(AUTOMAKE) --gnu \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --gnu Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ echo ' $(SHELL) ./config.status'; \ $(SHELL) ./config.status;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(top_srcdir)/configure: $(am__configure_deps) cd $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) config.h: stamp-h1 @if test ! -f $@; then \ rm -f stamp-h1; \ $(MAKE) stamp-h1; \ else :; fi stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status @rm -f stamp-h1 cd $(top_builddir) && $(SHELL) ./config.status config.h $(srcdir)/config.h.in: $(am__configure_deps) cd $(top_srcdir) && $(AUTOHEADER) rm -f stamp-h1 touch $@ distclean-hdr: -rm -f config.h stamp-h1 obexftp.spec: $(top_builddir)/config.status $(srcdir)/obexftp.spec.in cd $(top_builddir) && $(SHELL) ./config.status $@ obexftp.pc: $(top_builddir)/config.status $(srcdir)/obexftp.pc.in cd $(top_builddir) && $(SHELL) ./config.status $@ mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool uninstall-info-am: install-pkgconfigDATA: $(pkgconfig_DATA) @$(NORMAL_INSTALL) test -z "$(pkgconfigdir)" || $(mkdir_p) "$(DESTDIR)$(pkgconfigdir)" @list='$(pkgconfig_DATA)'; for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ f=$(am__strip_dir) \ echo " $(pkgconfigDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgconfigdir)/$$f'"; \ $(pkgconfigDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgconfigdir)/$$f"; \ done uninstall-pkgconfigDATA: @$(NORMAL_UNINSTALL) @list='$(pkgconfig_DATA)'; for p in $$list; do \ f=$(am__strip_dir) \ echo " rm -f '$(DESTDIR)$(pkgconfigdir)/$$f'"; \ rm -f "$(DESTDIR)$(pkgconfigdir)/$$f"; \ done # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" mostlyclean-recursive clean-recursive distclean-recursive \ maintainer-clean-recursive: @failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(CTAGS_ARGS)$$tags$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) $(am__remove_distdir) mkdir $(distdir) $(mkdir_p) $(distdir)/. $(distdir)/includes $(distdir)/m4 $(distdir)/swig/perl $(distdir)/swig/python @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ list='$(DISTFILES)'; for file in $$list; do \ case $$file in \ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ esac; \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ dir="/$$dir"; \ $(mkdir_p) "$(distdir)$$dir"; \ else \ dir=''; \ fi; \ if test -d $$d/$$file; then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(mkdir_p) "$(distdir)/$$subdir" \ || exit 1; \ distdir=`$(am__cd) $(distdir) && pwd`; \ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ (cd $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$top_distdir" \ distdir="$$distdir/$$subdir" \ distdir) \ || exit 1; \ fi; \ done -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r $(distdir) dist-gzip: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) dist-bzip2: distdir tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 $(am__remove_distdir) dist-tarZ: distdir tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__remove_distdir) dist-shar: distdir shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz $(am__remove_distdir) dist-zip: distdir -rm -f $(distdir).zip zip -rq $(distdir).zip $(distdir) $(am__remove_distdir) dist dist-all: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 $(am__remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ esac chmod -R a-w $(distdir); chmod a+w $(distdir) mkdir $(distdir)/_build mkdir $(distdir)/_inst chmod a-w $(distdir) dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ && cd $(distdir)/_build \ && ../configure --srcdir=.. --prefix="$$dc_install_base" \ $(DISTCHECK_CONFIGURE_FLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) uninstall \ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ } || { rm -rf "$$dc_destdir"; exit 1; }) \ && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist \ && rm -rf $(DIST_ARCHIVES) \ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck $(am__remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}' distuninstallcheck: @cd $(distuninstallcheck_dir) \ && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ echo " (check DESTDIR support)"; \ fi ; \ $(distuninstallcheck_listfiles) ; \ exit 1; } >&2 distcleancheck: distclean @if test '$(srcdir)' = . ; then \ echo "ERROR: distcleancheck can only run from a VPATH build" ; \ exit 1 ; \ fi @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left in build directory after distclean:" ; \ $(distcleancheck_listfiles) ; \ exit 1; } >&2 check-am: all-am check: check-recursive all-am: Makefile $(DATA) config.h installdirs: installdirs-recursive installdirs-am: for dir in "$(DESTDIR)$(pkgconfigdir)"; do \ test -z "$$dir" || $(mkdir_p) "$$dir"; \ done install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -f Makefile distclean-am: clean-am distclean-generic distclean-hdr \ distclean-libtool distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive info: info-recursive info-am: install-data-am: install-pkgconfigDATA install-exec-am: install-info: install-info-recursive install-man: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf $(top_srcdir)/autom4te.cache -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-info-am uninstall-pkgconfigDATA uninstall-info: uninstall-info-recursive .PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \ check-am clean clean-generic clean-libtool clean-recursive \ ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \ dist-shar dist-tarZ dist-zip distcheck distclean \ distclean-generic distclean-hdr distclean-libtool \ distclean-recursive distclean-tags distcleancheck distdir \ distuninstallcheck dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-exec \ install-exec-am install-info install-info-am install-man \ install-pkgconfigDATA install-strip installcheck \ installcheck-am installdirs installdirs-am maintainer-clean \ maintainer-clean-generic maintainer-clean-recursive \ mostlyclean mostlyclean-generic mostlyclean-libtool \ mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \ uninstall uninstall-am uninstall-info-am \ uninstall-pkgconfigDATA #DISTCHECK_CONFIGURE_FLAGS = --enable-swig --enable-perl --enable-python --enable-ruby --enable-tcl --enable-builddocs # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: obexftp-0.23/README0000644000076600000240000001016011146600644010705 00000000000000ObexFTP Readme ============== Introduction ------------ ObexFTP implements the Object Exchange (OBEX) file transfer feature for clients and servers. The standard is defined in more detail in section K12.5 (Profiles: OBEX FTP) in Bluetooth V1.1 Profile Specifications. ObexFTP works out-of-the-box with all transports supported by OpenOBEX. Currently there is IrDA, Bluetooth, USB and network (TCP) transport support. ObexFTP also comes with ready to use custom transport support for many mobile phones serial cables. It's well tested with Siemens and Sony/Ericsson mobile phones. But then most Motorola and Sharp (generic) as well as Samsung phones will work too, please contact the author if not. This ObexFTP distribution contains libraries as well as some applications. Applications to access e.g. Flex. Memory and Multimedia- /Secure Digital Card memory on mobile equipment: - obexftp - all in one client application (heavy on options) - Symlinks to obexftp for default operations: - obexls - list the mobiles contents - obexget - copy files(s) to mobile - obexput - copy files(s) from mobile - obexrm - remove files on the mobile - obexftpd - obex ftp server application (experimental) Applications to hack Siemens mobile equipment using datalink cable - bfb_keysim - simulate key presses on the mobile - bfb_eeprom - list and examine the user eeprom on the mobile Library parts to be used in other applications - obexftp - high level abstraction of OBEX FTP (SYNC, PUSH also) protocol - multicobex - cable OBEX support for many phones (i.e. Siemens BFB and BFC Sony/Ericsson, Motorola and generic (Sharp) modes) - bfb - Siemens mobile datalink cable protocol layer Short Installation Instructions ------------------------------- To compile and install: # ./configure # make # make install (as superuser) If you plan to use a Siemens x45 or x55 series (e.g. S45 or C55, not S65) use CFLAGS="$CFLAGS -DCOMPAT_S45" ./configure instead Consider using pedantic error checking: CFLAGS="$CFLAGS -Werror" ./configure If compiling doesn't work, try to disable some of the language bindings on configure. --disable-perl --disable-python --disable-ruby --disable-tcl Building from CVS/SVN/GIT ------------------------- Prepare the source tree with: # autoreconf --install --force If that doesn't work or you want to control the individual steps run: # aclocal --force -I m4 # libtoolize --copy --force || glibtoolize --copy --force # autoconf --force # autoheader --force # automake --add-missing --copy --force-missing Then do a full configure and make: # ./configure --enable-swig --enable-builddocs && make Further Development ------------------- If this tool lacks support for your phone or just won't work quite right please let me know. Development will focus on your needs. This package lacks advanced examples using the bindings. There are some 3rd party GUIs and other projects like a obex file system though. Please see the OpenOBEX / ObexFTP web site for details. Developers are free to use the bindings as well as obexftp, multicobex and bfb libraries. Please join the mailing list and keep in touch - You'll recieve pre-releases and support. That way your application can benefit from the newest library features and further development can focus on your needs. Debugging --------- remove all ObexFTP installations from your system. Build using CFLAGS="-DOBEXFTP_DEBUG=5" ./configure make clean ; make Start debugging using ./apps/obexftp [...] You might want to try picking up compiler warnings too (and mail them to me) CFLAGS="$CFLAGS -g -Wall -Wmissing-declarations -Wmissing-prototypes \ -Werror" ./configure make clean ; make Please mail me all warnings and errors, if any. The bindings use language-native installers which are missing the uninstall targets. Our distcheck will boldly ignore those files. Author and Contact ------------------ Author: Christian W. Zuckschwerdt http://dev.zuckschwerdt.org/openobex/ http://openobex.sourceforge.net/ http://sourceforge.net/tracker/?group_id=8960 http://sourceforge.net/forum/?group_id=8960 obexftp-0.23/obexftp.pc.in0000644000076600000240000000037111146600644012430 00000000000000prefix=@prefix@ exec_prefix=@exec_prefix@ libdir=@libdir@ includedir=@includedir@ Name: ObexFTP Description: OBEX file transfer library Version: @VERSION@ Requires: @REQUIRES@ Libs: -L${libdir} -lobexftp -lmulticobex -lbfb Cflags: -I${includedir} obexftp-0.23/missing0000755000076600000240000002540611146600664011437 00000000000000#! /bin/sh # Common stub for a few missing GNU programs while installing. scriptversion=2005-06-08.21 # Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005 # Free Software Foundation, Inc. # Originally by Fran,cois Pinard , 1996. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA # 02110-1301, USA. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. if test $# -eq 0; then echo 1>&2 "Try \`$0 --help' for more information" exit 1 fi run=: # In the cases where this matters, `missing' is being run in the # srcdir already. if test -f configure.ac; then configure_ac=configure.ac else configure_ac=configure.in fi msg="missing on your system" case "$1" in --run) # Try to run requested program, and just exit if it succeeds. run= shift "$@" && exit 0 # Exit code 63 means version mismatch. This often happens # when the user try to use an ancient version of a tool on # a file that requires a minimum version. In this case we # we should proceed has if the program had been absent, or # if --run hadn't been passed. if test $? = 63; then run=: msg="probably too old" fi ;; -h|--h|--he|--hel|--help) echo "\ $0 [OPTION]... PROGRAM [ARGUMENT]... Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an error status if there is no known handling for PROGRAM. Options: -h, --help display this help and exit -v, --version output version information and exit --run try to run the given command, and emulate it if it fails Supported PROGRAM values: aclocal touch file \`aclocal.m4' autoconf touch file \`configure' autoheader touch file \`config.h.in' automake touch all \`Makefile.in' files bison create \`y.tab.[ch]', if possible, from existing .[ch] flex create \`lex.yy.c', if possible, from existing .c help2man touch the output file lex create \`lex.yy.c', if possible, from existing .c makeinfo touch the output file tar try tar, gnutar, gtar, then tar without non-portable flags yacc create \`y.tab.[ch]', if possible, from existing .[ch] Send bug reports to ." exit $? ;; -v|--v|--ve|--ver|--vers|--versi|--versio|--version) echo "missing $scriptversion (GNU Automake)" exit $? ;; -*) echo 1>&2 "$0: Unknown \`$1' option" echo 1>&2 "Try \`$0 --help' for more information" exit 1 ;; esac # Now exit if we have it, but it failed. Also exit now if we # don't have it and --version was passed (most likely to detect # the program). case "$1" in lex|yacc) # Not GNU programs, they don't have --version. ;; tar) if test -n "$run"; then echo 1>&2 "ERROR: \`tar' requires --run" exit 1 elif test "x$2" = "x--version" || test "x$2" = "x--help"; then exit 1 fi ;; *) if test -z "$run" && ($1 --version) > /dev/null 2>&1; then # We have it, but it failed. exit 1 elif test "x$2" = "x--version" || test "x$2" = "x--help"; then # Could not run --version or --help. This is probably someone # running `$TOOL --version' or `$TOOL --help' to check whether # $TOOL exists and not knowing $TOOL uses missing. exit 1 fi ;; esac # If it does not exist, or fails to run (possibly an outdated version), # try to emulate it. case "$1" in aclocal*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." touch aclocal.m4 ;; autoconf) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." touch configure ;; autoheader) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`acconfig.h' or \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` test -z "$files" && files="config.h" touch_files= for f in $files; do case "$f" in *:*) touch_files="$touch_files "`echo "$f" | sed -e 's/^[^:]*://' -e 's/:.*//'`;; *) touch_files="$touch_files $f.in";; esac done touch $touch_files ;; automake*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." find . -type f -name Makefile.am -print | sed 's/\.am$/.in/' | while read f; do touch "$f"; done ;; autom4te) echo 1>&2 "\ WARNING: \`$1' is needed, but is $msg. You might have modified some files without having the proper tools for further handling them. You can get \`$1' as part of \`Autoconf' from any GNU archive site." file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'` test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'` if test -f "$file"; then touch $file else test -z "$file" || exec >$file echo "#! /bin/sh" echo "# Created by GNU Automake missing as a replacement of" echo "# $ $@" echo "exit 0" chmod +x $file exit 1 fi ;; bison|yacc) echo 1>&2 "\ WARNING: \`$1' $msg. You should only need it if you modified a \`.y' file. You may need the \`Bison' package in order for those modifications to take effect. You can get \`Bison' from any GNU archive site." rm -f y.tab.c y.tab.h if [ $# -ne 1 ]; then eval LASTARG="\${$#}" case "$LASTARG" in *.y) SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` if [ -f "$SRCFILE" ]; then cp "$SRCFILE" y.tab.c fi SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` if [ -f "$SRCFILE" ]; then cp "$SRCFILE" y.tab.h fi ;; esac fi if [ ! -f y.tab.h ]; then echo >y.tab.h fi if [ ! -f y.tab.c ]; then echo 'main() { return 0; }' >y.tab.c fi ;; lex|flex) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a \`.l' file. You may need the \`Flex' package in order for those modifications to take effect. You can get \`Flex' from any GNU archive site." rm -f lex.yy.c if [ $# -ne 1 ]; then eval LASTARG="\${$#}" case "$LASTARG" in *.l) SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` if [ -f "$SRCFILE" ]; then cp "$SRCFILE" lex.yy.c fi ;; esac fi if [ ! -f lex.yy.c ]; then echo 'main() { return 0; }' >lex.yy.c fi ;; help2man) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a dependency of a manual page. You may need the \`Help2man' package in order for those modifications to take effect. You can get \`Help2man' from any GNU archive site." file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` if test -z "$file"; then file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'` fi if [ -f "$file" ]; then touch $file else test -z "$file" || exec >$file echo ".ab help2man is required to generate this page" exit 1 fi ;; makeinfo) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a \`.texi' or \`.texinfo' file, or any other file indirectly affecting the aspect of the manual. The spurious call might also be the consequence of using a buggy \`make' (AIX, DU, IRIX). You might want to install the \`Texinfo' package or the \`GNU make' package. Grab either from any GNU archive site." # The file to touch is that specified with -o ... file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` if test -z "$file"; then # ... or it is the one specified with @setfilename ... infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile` # ... or it is derived from the source name (dir/f.texi becomes f.info) test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info fi # If the file does not exist, the user really needs makeinfo; # let's fail without touching anything. test -f $file || exit 1 touch $file ;; tar) shift # We have already tried tar in the generic part. # Look for gnutar/gtar before invocation to avoid ugly error # messages. if (gnutar --version > /dev/null 2>&1); then gnutar "$@" && exit 0 fi if (gtar --version > /dev/null 2>&1); then gtar "$@" && exit 0 fi firstarg="$1" if shift; then case "$firstarg" in *o*) firstarg=`echo "$firstarg" | sed s/o//` tar "$firstarg" "$@" && exit 0 ;; esac case "$firstarg" in *h*) firstarg=`echo "$firstarg" | sed s/h//` tar "$firstarg" "$@" && exit 0 ;; esac fi echo 1>&2 "\ WARNING: I can't seem to be able to run \`tar' with the given arguments. You may want to install GNU tar or Free paxutils, or check the command line arguments." exit 1 ;; *) echo 1>&2 "\ WARNING: \`$1' is needed, and is $msg. You might have modified some files without having the proper tools for further handling them. Check the \`README' file, it often tells you about the needed prerequisites for installing this package. You may also peek at any GNU archive site, in case some other package would contain this missing \`$1' program." exit 1 ;; esac exit 0 # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-end: "$" # End: obexftp-0.23/config.rpath0000644000076600000240000003502511146600644012341 00000000000000#! /bin/sh # Output a system dependent set of variables, describing how to set the # run time search path of shared libraries in an executable. # # Copyright 1996-2005 Free Software Foundation, Inc. # Taken from GNU libtool, 2001 # Originally by Gordon Matzigkeit , 1996 # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. # # The first argument passed to this file is the canonical host specification, # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM # or # CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM # The environment variables CC, GCC, LDFLAGS, LD, with_gnu_ld # should be set by the caller. # # The set of defined variables is at the end of this script. # Known limitations: # - On IRIX 6.5 with CC="cc", the run time search patch must not be longer # than 256 bytes, otherwise the compiler driver will dump core. The only # known workaround is to choose shorter directory names for the build # directory and/or the installation directory. # All known linkers require a `.a' archive for static linking (except M$VC, # which needs '.lib'). libext=a shrext=.so host="$1" host_cpu=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` cc_basename=`echo "$CC" | sed -e 's%^.*/%%'` # Code taken from libtool.m4's AC_LIBTOOL_PROG_COMPILER_PIC. wl= if test "$GCC" = yes; then wl='-Wl,' else case "$host_os" in aix*) wl='-Wl,' ;; darwin*) case "$cc_basename" in xlc*) wl='-Wl,' ;; esac ;; mingw* | pw32* | os2*) ;; hpux9* | hpux10* | hpux11*) wl='-Wl,' ;; irix5* | irix6* | nonstopux*) wl='-Wl,' ;; newsos6) ;; linux*) case $cc_basename in icc* | ecc*) wl='-Wl,' ;; pgcc | pgf77 | pgf90) wl='-Wl,' ;; ccc*) wl='-Wl,' ;; como) wl='-lopt=' ;; esac ;; osf3* | osf4* | osf5*) wl='-Wl,' ;; sco3.2v5*) ;; solaris*) wl='-Wl,' ;; sunos4*) wl='-Qoption ld ' ;; sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) wl='-Wl,' ;; sysv4*MP*) ;; unicos*) wl='-Wl,' ;; uts4*) ;; esac fi # Code taken from libtool.m4's AC_LIBTOOL_PROG_LD_SHLIBS. hardcode_libdir_flag_spec= hardcode_libdir_separator= hardcode_direct=no hardcode_minus_L=no case "$host_os" in cygwin* | mingw* | pw32*) # FIXME: the MSVC++ port hasn't been tested in a loooong time # When not using gcc, we currently assume that we are using # Microsoft Visual C++. if test "$GCC" != yes; then with_gnu_ld=no fi ;; openbsd*) with_gnu_ld=no ;; esac ld_shlibs=yes if test "$with_gnu_ld" = yes; then case "$host_os" in aix3* | aix4* | aix5*) # On AIX/PPC, the GNU linker is very broken if test "$host_cpu" != ia64; then ld_shlibs=no fi ;; amigaos*) hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes # Samuel A. Falvo II reports # that the semantics of dynamic libraries on AmigaOS, at least up # to version 4, is to share data among multiple programs linked # with the same dynamic library. Since this doesn't match the # behavior of shared libraries on other platforms, we cannot use # them. ld_shlibs=no ;; beos*) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then : else ld_shlibs=no fi ;; cygwin* | mingw* | pw32*) # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. hardcode_libdir_flag_spec='-L$libdir' if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then : else ld_shlibs=no fi ;; netbsd*) ;; solaris* | sysv5*) if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then ld_shlibs=no elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then : else ld_shlibs=no fi ;; sunos4*) hardcode_direct=yes ;; linux*) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then : else ld_shlibs=no fi ;; *) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then : else ld_shlibs=no fi ;; esac if test "$ld_shlibs" = yes; then # Unlike libtool, we use -rpath here, not --rpath, since the documented # option of GNU ld is called -rpath, not --rpath. hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' fi else case "$host_os" in aix3*) # Note: this linker hardcodes the directories in LIBPATH if there # are no directories specified by -L. hardcode_minus_L=yes if test "$GCC" = yes; then # Neither direct hardcoding nor static linking is supported with a # broken collect2. hardcode_direct=unsupported fi ;; aix4* | aix5*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no else aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # need to do runtime linking. case $host_os in aix4.[23]|aix4.[23].*|aix5*) for ld_flag in $LDFLAGS; do if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then aix_use_runtimelinking=yes break fi done esac fi hardcode_direct=yes hardcode_libdir_separator=':' if test "$GCC" = yes; then case $host_os in aix4.[012]|aix4.[012].*) collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && \ strings "$collect2name" | grep resolve_lib_name >/dev/null then # We have reworked collect2 hardcode_direct=yes else # We have old collect2 hardcode_direct=unsupported hardcode_minus_L=yes hardcode_libdir_flag_spec='-L$libdir' hardcode_libdir_separator= fi esac fi # Begin _LT_AC_SYS_LIBPATH_AIX. echo 'int main () { return 0; }' > conftest.c ${CC} ${LDFLAGS} conftest.c -o conftest aix_libpath=`dump -H conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } }'` if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } }'` fi if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib" fi rm -f conftest.c conftest # End _LT_AC_SYS_LIBPATH_AIX. if test "$aix_use_runtimelinking" = yes; then hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" else if test "$host_cpu" = ia64; then hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' else hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" fi fi ;; amigaos*) hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes # see comment about different semantics on the GNU ld section ld_shlibs=no ;; bsdi[45]*) ;; cygwin* | mingw* | pw32*) # When not using gcc, we currently assume that we are using # Microsoft Visual C++. # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. hardcode_libdir_flag_spec=' ' libext=lib ;; darwin* | rhapsody*) hardcode_direct=no if test "$GCC" = yes ; then : else case "$cc_basename" in xlc*) ;; *) ld_shlibs=no ;; esac fi ;; dgux*) hardcode_libdir_flag_spec='-L$libdir' ;; freebsd1*) ld_shlibs=no ;; freebsd2.2*) hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes ;; freebsd2*) hardcode_direct=yes hardcode_minus_L=yes ;; freebsd* | kfreebsd*-gnu | dragonfly*) hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes ;; hpux9*) hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_separator=: hardcode_direct=yes # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes ;; hpux10* | hpux11*) if test "$with_gnu_ld" = no; then case "$host_cpu" in hppa*64*) hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_separator=: hardcode_direct=no ;; ia64*) hardcode_libdir_flag_spec='-L$libdir' hardcode_direct=no # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes ;; *) hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_separator=: hardcode_direct=yes # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes ;; esac fi ;; irix5* | irix6* | nonstopux*) hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: ;; netbsd*) hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes ;; newsos6) hardcode_direct=yes hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: ;; openbsd*) hardcode_direct=yes if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then hardcode_libdir_flag_spec='${wl}-rpath,$libdir' else case "$host_os" in openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) hardcode_libdir_flag_spec='-R$libdir' ;; *) hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ;; esac fi ;; os2*) hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes ;; osf3*) hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: ;; osf4* | osf5*) if test "$GCC" = yes; then hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' else # Both cc and cxx compiler support -rpath directly hardcode_libdir_flag_spec='-rpath $libdir' fi hardcode_libdir_separator=: ;; sco3.2v5*) ;; solaris*) hardcode_libdir_flag_spec='-R$libdir' ;; sunos4*) hardcode_libdir_flag_spec='-L$libdir' hardcode_direct=yes hardcode_minus_L=yes ;; sysv4) case $host_vendor in sni) hardcode_direct=yes # is this really true??? ;; siemens) hardcode_direct=no ;; motorola) hardcode_direct=no #Motorola manual says yes, but my tests say they lie ;; esac ;; sysv4.3*) ;; sysv4*MP*) if test -d /usr/nec; then ld_shlibs=yes fi ;; sysv4.2uw2*) hardcode_direct=yes hardcode_minus_L=no ;; sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*) ;; sysv5*) hardcode_libdir_flag_spec= ;; uts4*) hardcode_libdir_flag_spec='-L$libdir' ;; *) ld_shlibs=no ;; esac fi # Check dynamic linker characteristics # Code taken from libtool.m4's AC_LIBTOOL_SYS_DYNAMIC_LINKER. libname_spec='lib$name' case "$host_os" in aix3*) ;; aix4* | aix5*) ;; amigaos*) ;; beos*) ;; bsdi[45]*) ;; cygwin* | mingw* | pw32*) shrext=.dll ;; darwin* | rhapsody*) shrext=.dylib ;; dgux*) ;; freebsd1*) ;; kfreebsd*-gnu) ;; freebsd*) ;; gnu*) ;; hpux9* | hpux10* | hpux11*) case "$host_cpu" in ia64*) shrext=.so ;; hppa*64*) shrext=.sl ;; *) shrext=.sl ;; esac ;; irix5* | irix6* | nonstopux*) case "$host_os" in irix5* | nonstopux*) libsuff= shlibsuff= ;; *) case $LD in *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= ;; *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 ;; *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 ;; *) libsuff= shlibsuff= ;; esac ;; esac ;; linux*oldld* | linux*aout* | linux*coff*) ;; linux*) ;; knetbsd*-gnu) ;; netbsd*) ;; newsos6) ;; nto-qnx*) ;; openbsd*) ;; os2*) libname_spec='$name' shrext=.dll ;; osf3* | osf4* | osf5*) ;; sco3.2v5*) ;; solaris*) ;; sunos4*) ;; sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) ;; sysv4*MP*) ;; uts4*) ;; esac sed_quote_subst='s/\(["`$\\]\)/\\\1/g' escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"` shlibext=`echo "$shrext" | sed -e 's,^\.,,'` escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` LC_ALL=C sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' <, Dec 2001 - Sep 2004 # Summary: Access devices via ObexFTP e.g. mobile phones Name: obexftp Version: @VERSION@ Release: 1 Copyright: GPL Group: Utilities/Console Autoreqprov: on Source: http://triq.net/obexftp/%{name}-%{version}.tar.gz URL: http://triq.net/obex/ BuildRoot: %{_tmppath}/%{name}-%{version}-root Packager: Christian W. Zuckschwerdt %description This package contains some command line tools and the ObexFTP library. Using OpenOBEX it enables you to transfer data via IrDA, BlueTooth as well as some custom (Siemens, Ericsson) serial port protocols. Authors: -------- Christian W. Zuckschwerdt %prep %setup %configure %build make %install rm -rf $RPM_BUILD_ROOT %makeinstall ln -s obexftp $RPM_BUILD_ROOT%{_bindir}/obexls ln -s obexftp $RPM_BUILD_ROOT%{_bindir}/obexget ln -s obexftp $RPM_BUILD_ROOT%{_bindir}/obexput ln -s obexftp $RPM_BUILD_ROOT%{_bindir}/obexrm %clean rm -rf $RPM_BUILD_ROOT %files %defattr(-, root, root) %doc AUTHORS COPYING ChangeLog NEWS %doc README README.bfb README.obexftp README.openobex %{_bindir}/* %{_libdir}/* %{_mandir}/man?/* %{_includedir}/*/* obexftp-0.23/obexftp/0000777000076600000240000000000011146603263011562 500000000000000obexftp-0.23/obexftp/uuid.h0000644000076600000240000000253311146600644012620 00000000000000/** \file obexftp/uuid.h Definitions of well-known Universal Unique Identifiers (UUIDs). ObexFTP library - language bindings for OBEX file transfer. Copyright (c) 2002-2007 Christian W. Zuckschwerdt */ #ifndef OBEXFTP_UUID_H #define OBEXFTP_UUID_H /** Folder Browsing service UUID. binary representation of F9EC7BC4-953C-11D2-984E-525400DC9E09 */ #define __UUID_FBS_bytes \ { 0xF9, 0xEC, 0x7B, 0xC4, \ 0x95, 0x3C, 0x11, 0xD2, 0x98, 0x4E, \ 0x52, 0x54, 0x00, 0xDC, 0x9E, 0x09 } #define UUID_FBS ((const uint8_t []) __UUID_FBS_bytes) /** UUID for Siemens S45 and maybe others too. binary representation of 6B01CB31-4106-11D4-9A77-0050DA3F471F */ #define __UUID_S45_bytes \ { 0x6B, 0x01, 0xCB, 0x31, \ 0x41, 0x06, 0x11, 0xD4, 0x9A, 0x77, \ 0x00, 0x50, 0xDA, 0x3F, 0x47, 0x1F } #define UUID_S45 ((const uint8_t []) __UUID_S45_bytes) /** UUID for Telecom/IrMC Synchronization Service (see IrOBEX spec). The character string "IRMC-SYNC". */ #define __UUID_IRMC_bytes \ { 'I', 'R', 'M', 'C', '-', 'S', 'Y', 'N', 'C' } #define UUID_IRMC ((const uint8_t []) __UUID_IRMC_bytes) /** UUID for Sharp mobiles. The character string "PCSOFTWARE". */ #define __UUID_PCSOFTWARE_bytes \ { 'P', 'C', 'S', 'O', 'F', 'T', 'W', 'A', 'R', 'E' } #define UUID_PCSOFTWARE ((const uint8_t []) __UUID_PCSOFTWARE_bytes) #endif /* OBEXFTP_UUID_H */ obexftp-0.23/obexftp/client.h0000644000076600000240000001437011146600644013132 00000000000000/** \file obexftp/client.h ObexFTP client API. ObexFTP library - language bindings for OBEX file transfer. Copyright (c) 2002-2007 Christian W. Zuckschwerdt ObexFTP is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with ObexFTP. If not, see . */ #ifndef OBEXFTP_CLIENT_H #define OBEXFTP_CLIENT_H #include #include #include #include #ifndef OBEX_TRANS_USB #define OBEX_TRANS_USB 6 #endif #include "obexftp.h" #include "object.h" #include "uuid.h" #ifdef __cplusplus extern "C" { #endif /* quirks */ #define OBEXFTP_LEADING_SLASH 0x01 /* used in get (and alike) */ #define OBEXFTP_TRAILING_SLASH 0x02 /* used in list */ #define OBEXFTP_SPLIT_SETPATH 0x04 /* some phones dont have a cwd */ #define OBEXFTP_CONN_HEADER 0x08 /* do we even need this? */ #define OBEXFTP_USE_LEADING_SLASH(x) ((x & OBEXFTP_LEADING_SLASH) != 0) #define OBEXFTP_USE_TRAILING_SLASH(x) ((x & OBEXFTP_TRAILING_SLASH) != 0) #define OBEXFTP_USE_SPLIT_SETPATH(x) ((x & OBEXFTP_SPLIT_SETPATH) != 0) #define OBEXFTP_USE_CONN_HEADER(x) ((x & OBEXFTP_CONN_HEADER) != 0) /* dont disable leading slashes unless you disable split setpath */ #define DEFAULT_OBEXFTP_QUIRKS \ (OBEXFTP_LEADING_SLASH | OBEXFTP_TRAILING_SLASH | OBEXFTP_SPLIT_SETPATH | OBEXFTP_CONN_HEADER) #define DEFAULT_CACHE_TIMEOUT 180 /* 3 minutes */ #define DEFAULT_CACHE_MAXSIZE 10240 /* 10k */ /* types */ typedef struct { char name[256]; mode_t mode; int size; time_t mtime; } stat_entry_t; typedef struct cache_object cache_object_t; struct cache_object { cache_object_t *next; int refcnt; time_t timestamp; int size; /* or uint32_t */ char *name; char *content; /* or uint8_t */ stat_entry_t *stats; /* only if its a parsed directory */ }; typedef struct { /* state */ obex_t *obexhandle; uint32_t connection_id; /* set to 0xffffffff if unused */ obex_ctrans_t *ctrans; /* only valid with OBEX_TRANS_CUSTOM */ int transport; /* the transport for obexhandle */ int finished; int success; int obex_rsp; int mutex; /* should be using pthreads for this */ int quirks; /* client */ obexftp_info_cb_t infocb; void *infocb_data; /* transfer (put) */ int fd; /* used in put body */ uint8_t *stream_chunk; uint32_t out_size; uint32_t out_pos; const uint8_t *out_data; /* transfer (get) */ char *target_fn; /* used in get body */ uint32_t buf_size; /* not size but len... */ uint8_t *buf_data; uint32_t apparam_info; /* persistence */ cache_object_t *cache; int cache_timeout; int cache_maxsize; } obexftp_client_t; /* session */ /*@null@*/ obexftp_client_t *obexftp_open(int transport, /*@null@*/ /*const*/ obex_ctrans_t *ctrans, /*@null@*/ obexftp_info_cb_t infocb, /*@null@*/ void *infocb_data); void obexftp_close(/*@only@*/ /*@out@*/ /*@null@*/ obexftp_client_t *cli); int obexftp_connect_uuid(obexftp_client_t *cli, /*@null@*/ const char *device, /* for INET, BLUETOOTH */ int port, /* INET(?), BLUETOOTH, USB*/ /*@null@*/ const uint8_t uuid[], uint32_t uuid_len); int obexftp_connect_src(obexftp_client_t *cli, /*@null@*/ const char *src, /* HCI no. or address */ /*@null@*/ const char *device, /* for INET, BLUETOOTH */ int port, /* INET(?), BLUETOOTH, USB*/ /*@null@*/ const uint8_t uuid[], uint32_t uuid_len); int obexftp_connect_service(obexftp_client_t *cli, /*@null@*/ const char *src, /* HCI no. or address */ /*@null@*/ const char *device, /* for INET, BLUETOOTH */ int port, /* INET(?), BLUETOOTH, USB*/ int service); //int obexftp_connect_service(obexftp_client_t *cli, // /*@null@*/ const char *service, // /*@null@*/ const char *device, /* for INET, BLUETOOTH */ // int port, /* INET(?), BLUETOOTH, USB*/ ); #define obexftp_connect(cli, device, port) \ obexftp_connect_uuid(cli, device, port, UUID_FBS, sizeof(UUID_FBS)) #define obexftp_connect_ftp(cli, device, port) \ obexftp_connect_uuid(cli, device, port, UUID_FBS, sizeof(UUID_FBS)) #define obexftp_connect_push(cli, device, port) \ obexftp_connect_uuid(cli, device, port, NULL, 0) #define obexftp_connect_sync(cli, device, port) \ obexftp_connect_uuid(cli, device, port, UUID_IRMC, sizeof(UUID_IRMC)) int obexftp_disconnect(obexftp_client_t *cli); /* transfer */ int obexftp_setpath(obexftp_client_t *cli, /*@null@*/ const char *name, int create); #define obexftp_chpath(cli, name) \ obexftp_setpath(cli, name, 0) #define obexftp_mkpath(cli, name) \ obexftp_setpath(cli, name, 1) #define obexftp_cdup(cli) \ obexftp_setpath(cli, NULL, 0) #define obexftp_cdtop(cli) \ obexftp_setpath(cli, "", 0) int obexftp_get_type(obexftp_client_t *cli, const char *type, /*@null@*/ const char *localname, /*@null@*/ const char *remotename); #define obexftp_get(cli, localname, remotename) \ obexftp_get_type(cli, NULL, localname, remotename) #define obexftp_list(cli, localname, remotename) \ obexftp_get_type(cli, XOBEX_LISTING, localname, remotename) #define obexftp_get_capability(cli, localname, remotename) \ obexftp_get_type(cli, XOBEX_CAPABILITY, localname, remotename) int obexftp_put_file(obexftp_client_t *cli, const char *filename, const char *remotename); int obexftp_put_data(obexftp_client_t *cli, const char *data, int size, const char *remotename); int obexftp_del(obexftp_client_t *cli, const char *name); /* Siemens only */ int obexftp_info(obexftp_client_t *cli, uint8_t opcode); int obexftp_rename(obexftp_client_t *cli, const char *sourcename, const char *targetname); /* compatible directory handling */ void *obexftp_opendir(obexftp_client_t *cli, const char *name); int obexftp_closedir(void *dir); stat_entry_t *obexftp_readdir(void *dir); stat_entry_t *obexftp_stat(obexftp_client_t *cli, const char *name); #ifdef __cplusplus } #endif #endif /* OBEXFTP_CLIENT_H */ obexftp-0.23/obexftp/object.c0000644000076600000240000002241311146600644013112 00000000000000/** \file obexftp/object.c Collection of functions to build common OBEX request objects. ObexFTP library - language bindings for OBEX file transfer. Copyright (c) 2002-2007 Christian W. Zuckschwerdt ObexFTP is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with ObexFTP. If not, see . */ #include #include #include #include "unicode.h" #include "object.h" /** Build an INFO request object (Siemens only). \param obex reference to an OpenOBEX instance. \param conn optional connection id number \param opcode select if you want to read mem installed (0x01) or free mem (0x02) \return a new obex object if successful, NULL otherwise */ obex_object_t *obexftp_build_info (obex_t obex, uint32_t conn, uint8_t opcode) { obex_object_t *object; obex_headerdata_t hv; uint8_t cmdstr[] = {APPARAM_INFO_CODE, 0x01, 0x00}; object = OBEX_ObjectNew(obex, OBEX_CMD_GET); if(object == NULL) return NULL; if(conn != 0xffffffff) { hv.bq4 = conn; (void) OBEX_ObjectAddHeader(obex, object, OBEX_HDR_CONNECTION, hv, sizeof(uint32_t), OBEX_FL_FIT_ONE_PACKET); } cmdstr[2] = opcode; hv.bs = (const uint8_t *) cmdstr; (void) OBEX_ObjectAddHeader(obex, object, OBEX_HDR_APPARAM, hv, sizeof(cmdstr), OBEX_FL_FIT_ONE_PACKET); return object; } /** Build a GET request object. \param obex reference to an OpenOBEX instance. \param conn optional connection id number \param name name of the requested file \param type type of the requested file \return a new obex object if successful, NULL otherwise \note \a name and \a type musn't both be NULL */ obex_object_t *obexftp_build_get (obex_t obex, uint32_t conn, const char *name, const char *type) { obex_object_t *object; obex_headerdata_t hv; uint8_t *ucname; int ucname_len; object = OBEX_ObjectNew(obex, OBEX_CMD_GET); if(object == NULL) return NULL; if(conn != 0xffffffff) { hv.bq4 = conn; (void) OBEX_ObjectAddHeader(obex, object, OBEX_HDR_CONNECTION, hv, sizeof(uint32_t), OBEX_FL_FIT_ONE_PACKET); } if(type != NULL) { // type header is a null terminated ascii string hv.bs = (const uint8_t *) type; (void) OBEX_ObjectAddHeader(obex, object, OBEX_HDR_TYPE, hv, strlen(type)+1, OBEX_FL_FIT_ONE_PACKET); } if (name != NULL) { ucname_len = strlen(name)*2 + 2; ucname = malloc(ucname_len); if(ucname == NULL) { (void) OBEX_ObjectDelete(obex, object); return NULL; } ucname_len = CharToUnicode(ucname, (uint8_t*)name, ucname_len); hv.bs = (const uint8_t *) ucname; (void) OBEX_ObjectAddHeader(obex, object, OBEX_HDR_NAME, hv, ucname_len, OBEX_FL_FIT_ONE_PACKET); free(ucname); } return object; } /** Build a RENAME request object (Siemens only). \param obex reference to an OpenOBEX instance. \param conn optional connection id number \param from original name of the requested file \param to new name of the requested file \return a new obex object if successful, NULL otherwise \note neither filename may be NULL */ obex_object_t *obexftp_build_rename (obex_t obex, uint32_t conn, const char *from, const char *to) { obex_object_t *object; obex_headerdata_t hv; uint8_t *appstr; uint8_t *appstr_p; int appstr_len; int ucname_len; char opname[] = {'m','o','v','e'}; if((from == NULL) || (to == NULL)) return NULL; object = OBEX_ObjectNew(obex, OBEX_CMD_PUT); if(object == NULL) return NULL; if(conn != 0xffffffff) { hv.bq4 = conn; (void) OBEX_ObjectAddHeader(obex, object, OBEX_HDR_CONNECTION, hv, sizeof(uint32_t), OBEX_FL_FIT_ONE_PACKET); } appstr_len = 1 + 1 + sizeof(opname) + strlen(from)*2 + 2 + strlen(to)*2 + 2 + 2; appstr = malloc(appstr_len); if(appstr == NULL) { (void) OBEX_ObjectDelete(obex, object); return NULL; } appstr_p = appstr; *appstr_p++ = 0x34; *appstr_p++ = sizeof(opname); memcpy(appstr_p, opname, sizeof(opname)); appstr_p += sizeof(opname); *appstr_p++ = 0x35; ucname_len = CharToUnicode(appstr_p + 1, (uint8_t*)from, strlen(from)*2 + 2); *appstr_p = ucname_len - 2; /* no trailing 0 */ appstr_p += ucname_len - 1; *appstr_p++ = 0x36; ucname_len = CharToUnicode(appstr_p + 1, (uint8_t*)to, strlen(to)*2 + 2); *appstr_p = ucname_len - 2; /* no trailing 0 */ hv.bs = (const uint8_t *) appstr; (void) OBEX_ObjectAddHeader(obex, object, OBEX_HDR_APPARAM, hv, appstr_len - 2, 0); free(appstr); return object; } /** Build a DELETE request object. \param obex reference to an OpenOBEX instance. \param conn optional connection id number \param name name of the file to be deleted \return a new obex object if successful, NULL otherwise \note \a name may not be NULL */ obex_object_t *obexftp_build_del (obex_t obex, uint32_t conn, const char *name) { obex_object_t *object; obex_headerdata_t hv; uint8_t *ucname; int ucname_len; if(name == NULL) return NULL; object = OBEX_ObjectNew(obex, OBEX_CMD_PUT); if(object == NULL) return NULL; if(conn != 0xffffffff) { hv.bq4 = conn; (void) OBEX_ObjectAddHeader(obex, object, OBEX_HDR_CONNECTION, hv, sizeof(uint32_t), OBEX_FL_FIT_ONE_PACKET); } ucname_len = strlen(name)*2 + 2; ucname = malloc(ucname_len); if(ucname == NULL) { (void) OBEX_ObjectDelete(obex, object); return NULL; } ucname_len = CharToUnicode(ucname, (uint8_t*)name, ucname_len); hv.bs = (const uint8_t *) ucname; (void) OBEX_ObjectAddHeader(obex, object, OBEX_HDR_NAME, hv, ucname_len, OBEX_FL_FIT_ONE_PACKET); free(ucname); return object; } /** Build a SETPATH request object. \param obex reference to an OpenOBEX instance. \param conn optional connection id number \param name name of the file to be deleted \param create create the folder if neccessary \return a new obex object if successful, NULL otherwise \note if \a name is NULL ascend one directory if \a name is empty change to top/default directory */ obex_object_t *obexftp_build_setpath (obex_t obex, uint32_t conn, const char *name, int create) { obex_object_t *object; obex_headerdata_t hv; // "Backup Level" and "Don't Create" flag in first byte // second byte is reserved and needs to be 0 uint8_t setpath_nohdr_data[2] = {0, 0}; uint8_t *ucname; int ucname_len; object = OBEX_ObjectNew(obex, OBEX_CMD_SETPATH); if(object == NULL) return NULL; if(conn != 0xffffffff) { hv.bq4 = conn; (void) OBEX_ObjectAddHeader(obex, object, OBEX_HDR_CONNECTION, hv, sizeof(uint32_t), OBEX_FL_FIT_ONE_PACKET); } if (create == 0) { // set the 'Don't Create' bit setpath_nohdr_data[0] |= 2; } if (name) { ucname_len = strlen(name)*2 + 2; ucname = malloc(ucname_len); if (ucname == NULL) { (void) OBEX_ObjectDelete(obex, object); return NULL; } ucname_len = CharToUnicode(ucname, (uint8_t*)name, ucname_len); /* apparently the empty name header is meant to be really empty... */ if (ucname_len == 2) ucname_len = 0; hv.bs = (const uint8_t *) ucname; (void) OBEX_ObjectAddHeader(obex, object, OBEX_HDR_NAME, hv, ucname_len, 0); free(ucname); } else { setpath_nohdr_data[0] = 1; /* or |= perhaps? */ } (void) OBEX_ObjectSetNonHdrData(object, setpath_nohdr_data, 2); return object; } /** Build a PUT request object. \param obex reference to an OpenOBEX instance. \param conn optional connection id number \param name name of the target file \param size size hint for the target file \return a new obex object if successful, NULL otherwise \note use build_object_from_file() instead */ obex_object_t *obexftp_build_put (obex_t obex, uint32_t conn, const char *name, const int size) { obex_object_t *object; obex_headerdata_t hv; uint8_t *ucname; int ucname_len; object = OBEX_ObjectNew(obex, OBEX_CMD_PUT); if(object == NULL) return NULL; if(conn != 0xffffffff) { hv.bq4 = conn; (void) OBEX_ObjectAddHeader(obex, object, OBEX_HDR_CONNECTION, hv, sizeof(uint32_t), OBEX_FL_FIT_ONE_PACKET); } ucname_len = strlen(name)*2 + 2; ucname = malloc(ucname_len); if(ucname == NULL) { (void) OBEX_ObjectDelete(obex, object); return NULL; } ucname_len = CharToUnicode(ucname, (uint8_t*)name, ucname_len); hv.bs = (const uint8_t *) ucname; (void ) OBEX_ObjectAddHeader(obex, object, OBEX_HDR_NAME, hv, ucname_len, 0); free(ucname); hv.bq4 = (uint32_t) size; (void) OBEX_ObjectAddHeader(obex, object, OBEX_HDR_LENGTH, hv, sizeof(uint32_t), 0); hv.bs = (const uint8_t *) NULL; (void) OBEX_ObjectAddHeader(obex, object, OBEX_HDR_BODY, hv, 0, OBEX_FL_STREAM_START); return object; } obexftp-0.23/obexftp/obexftp.h0000644000076600000240000000606711146600644013327 00000000000000/** \file obexftp/obexftp.h Data structures and general functions for OBEX clients and servers. ObexFTP library - language bindings for OBEX file transfer. Copyright (c) 2002-2007 Christian W. Zuckschwerdt ObexFTP is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with ObexFTP. If not, see . */ #ifndef OBEXFTP_H #define OBEXFTP_H #ifdef __cplusplus extern "C" { #endif /** ObexFTP message callback prototype. */ typedef void (*obexftp_info_cb_t) (int event, const char *buf, int len, void *data); /** ObexFTP message callback events */ enum { OBEXFTP_EV_ERRMSG, /* not used / internal error */ OBEXFTP_EV_OK, OBEXFTP_EV_ERR, OBEXFTP_EV_CONNECTING, OBEXFTP_EV_DISCONNECTING, OBEXFTP_EV_SENDING, OBEXFTP_EV_LISTENING, OBEXFTP_EV_CONNECTIND, OBEXFTP_EV_DISCONNECTIND, OBEXFTP_EV_RECEIVING, OBEXFTP_EV_BODY, OBEXFTP_EV_INFO, OBEXFTP_EV_PROGRESS, /* approx. every 1KByte */ }; /** Number of bytes passed at one time to OBEX. */ #define STREAM_CHUNK 4096 /* bt svclass */ #define OBEX_SYNC_SERVICE 0x1104 #define OBEX_PUSH_SERVICE 0x1105 #define OBEX_FTP_SERVICE 0x1106 /* server and client helpers for bt */ char **obexftp_discover(int transport); char **obexftp_discover_bt_src(const char *src); /* HCI no. or address */ #define obexftp_discover_bt() \ obexftp_discover_bt_src(NULL) char *obexftp_bt_name_src(const char *addr, const char *src); #define obexftp_bt_name(addr) \ obexftp_bt_name_src(addr, NULL) int obexftp_browse_bt_src(const char *src, const char *addr, int svclass); #define obexftp_browse_bt(device, service) \ obexftp_browse_bt_src(NULL, device, service) #define obexftp_browse_bt_ftp(device) \ obexftp_browse_bt_src(NULL, device, OBEX_FTP_SERVICE) #define obexftp_browse_bt_push(device) \ obexftp_browse_bt_src(NULL, device, OBEX_PUSH_SERVICE) #define obexftp_browse_bt_sync(device) \ obexftp_browse_bt_src(NULL, device, OBEX_SYNC_SERVICE) int obexftp_sdp_register(int svclass, int channel); #define obexftp_sdp_register_ftp(channel) \ obexftp_sdp_register(OBEX_FTP_SERVICE, channel) #define obexftp_sdp_register_push(channel) \ obexftp_sdp_register(OBEX_PUSH_SERVICE, channel) #define obexftp_sdp_register_sync(channel) \ obexftp_sdp_register(OBEX_SYNC_SERVICE, channel) int obexftp_sdp_unregister(int svclass); #define obexftp_sdp_unregister_ftp() \ obexftp_sdp_unregister(OBEX_FTP_SERVICE) #define obexftp_sdp_unregister_push() \ obexftp_sdp_unregister(OBEX_PUSH_SERVICE) #define obexftp_sdp_unregister_sync() \ obexftp_sdp_unregister(OBEX_SYNC_SERVICE) #ifdef __cplusplus } #endif #endif /* OBEXFTP */ obexftp-0.23/obexftp/unicode.c0000644000076600000240000001537311146600644013301 00000000000000/** \file obexftp/unicode.c Unicode charset and encoding conversions. ObexFTP library - language bindings for OBEX file transfer. Copyright (c) 2007 Christian W. Zuckschwerdt ObexFTP is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with ObexFTP. If not, see . */ #ifdef HAVE_CONFIG_H #include #endif #include #include #include #ifdef _WIN32 /* no need for iconv */ #include /* pulls in Winnls.h */ #else #ifdef HAVE_ICONV #include #include #ifdef HAVE_LANGINFO_H #include #define locale_charset nl_langinfo(CODESET) #else #define locale_charset "" #endif /* HAVE_LANGINFO_H */ #endif /* HAVE_ICONV */ #endif /* _WIN32 */ #include "unicode.h" #include /** Convert a string to UTF-16BE, tries to guess charset and encoding. As a lib we can't be sure what the input charset and encoding is. Try to read the input as UTF-8, this will also work for plain ASCII (7bit). On errors fall back to the environment locale, which again could be UTF-8. As last resort try to copy verbatim, i.e. as ISO-8859-1. \note This is a quick hack until OpenOBEX is iconv-ready. */ int CharToUnicode(uint8_t *uc, const uint8_t *c, int size) { #ifdef _WIN32 /* no need for iconv */ int ret, i; char tmp; return_val_if_fail(uc != NULL, -1); return_val_if_fail(c != NULL, -1); /* ANSI to UTF-16LE */ ret = MultiByteToWideChar(CP_ACP, 0, c, -1, (LPWSTR)uc, size); /* turn the eggs the right way around now */ for (i=0; i < ret; i++) { tmp = uc[2*i]; uc[2*i] = uc[2*i+1]; uc[2*i+1] = tmp; } return ret * 2; /* 0 on error */ #else /* _WIN32 */ #ifdef HAVE_ICONV iconv_t utf16; size_t ni, no, nrc; int ret; /* avoid type-punned dereferecing (breaks strict aliasing) */ char *cc = c; char *ucc = uc; return_val_if_fail(uc != NULL, -1); return_val_if_fail(c != NULL, -1); /* try UTF-8 to UTF-16BE */ ni = strlen(cc) + 1; no = size; utf16 = iconv_open("UTF-16BE", "UTF-8"); nrc = iconv(utf16, &cc, &ni, &ucc, &no); ret = iconv_close(utf16); if (nrc == (size_t)(-1)) { DEBUG(3, "Iconv from UTF-8 conversion error: '%s'\n", cc); } else { return size-no; } /* try current locale charset to UTF-16BE */ setlocale(LC_CTYPE, ""); DEBUG(2, "Iconv from locale \"%s\"\n", locale_charset); cc = c; ucc = uc; ni = strlen(cc) + 1; no = size; utf16 = iconv_open("UTF-16BE", locale_charset); nrc = iconv(utf16, &cc, &ni, &ucc, &no); ret = iconv_close(utf16); if (nrc == (size_t)(-1)) { DEBUG(3, "Iconv from locale conversion error: '%s'\n", cc); } else { return size-no; } /* fallback to ISO-8859-1 to UTF-16BE (every byte is valid here) */ cc = c; ucc = uc; ni = strlen(cc) + 1; no = size; utf16 = iconv_open("UTF-16BE", "ISO-8859-1"); nrc = iconv(utf16, &cc, &ni, &ucc, &no); ret = iconv_close(utf16); if (nrc == (size_t)(-1)) { DEBUG(2, "Iconv internal conversion error: '%s'\n", cc); return -1; } return size-no; #else /* HAVE_ICONV */ return OBEX_CharToUnicode(uc, c, size); #endif /* HAVE_ICONV */ #endif /* _WIN32 */ } /** Convert a string from UTF-16BE to locale charset. Plain ASCII (7bit) and basic ISO-8859-1 will always work. This conversion supports UTF-8 and single byte locales. \note This is a quick hack until OpenOBEX is iconv-ready. */ int UnicodeToChar(uint8_t *c, const uint8_t *uc, int size) { #ifdef _WIN32 /* no need for iconv */ int ret, n, i; uint8_t *le; return_val_if_fail(uc != NULL, -1); return_val_if_fail(c != NULL, -1); /* turn the eggs around, pointy side up */ for (n=0; uc[2*n] != 0 || uc[2*n+1] != 0; n++); le = malloc(2*n+2); for (i=0; i <= n; i++) { le[2*i] = uc[2*i+1]; le[2*i+1] = uc[2*i]; } /* UTF-16LE to ANSI */ ret = WideCharToMultiByte(CP_ACP, 0, le, -1, c, size, NULL, NULL); free(le); return ret; /* 0 on error */ #else /* _WIN32 */ #ifdef HAVE_ICONV iconv_t utf16; size_t ni, no, nrc; int ret; /* avoid type-punned dereferecing (breaks strict aliasing) */ char *cc = c; char *ucc = uc; return_val_if_fail(uc != NULL, -1); return_val_if_fail(c != NULL, -1); /* UTF-16BE to current locale charset */ setlocale(LC_CTYPE, ""); DEBUG(3, "Iconv to locale \"%s\"\n", locale_charset); for (ni=0; ucc[2*ni] != 0 || ucc[2*ni+1] != 0; ni++); ni = 2*ni+2; no = size; utf16 = iconv_open(locale_charset, "UTF-16BE"); nrc = iconv(utf16, &ucc, &ni, &cc, &no); ret = iconv_close(utf16); if (nrc == (size_t)(-1)) { DEBUG(2, "Iconv from locale conversion error: '%s'\n", cc); } return size-no; #else /* HAVE_ICONV */ return OBEX_UnicodeToChar(c, uc, size); #endif /* HAVE_ICONV */ #endif /* _WIN32 */ } /** Convert a (xml) string from UTF-8 to locale charset. Plain ASCII (7bit) and basic ISO-8859-1 will always work. This conversion supports UTF-8 and single byte locales. \note This is a quick hack until OpenOBEX is iconv-ready. */ int Utf8ToChar(uint8_t *c, const uint8_t *uc, int size) { #ifdef _WIN32 /* no need for iconv */ int ret, n, i; uint8_t *le; return_val_if_fail(uc != NULL, -1); return_val_if_fail(c != NULL, -1); n = strlen(uc)*2+2; le = malloc(n); /* UTF-8 to UTF-16LE */ ret = MultiByteToWideChar(CP_UTF8, 0, uc, -1, (LPWSTR)le, n); /* UTF-16LE to ANSI */ ret = WideCharToMultiByte(CP_ACP, 0, le, -1, c, size, NULL, NULL); free(le); return ret; /* 0 on error */ #else /* _WIN32 */ #ifdef HAVE_ICONV iconv_t utf8; size_t ni, no, nrc; int ret; /* avoid type-punned dereferecing (breaks strict aliasing) */ char *cc = c; char *ucc = uc; return_val_if_fail(uc != NULL, -1); return_val_if_fail(c != NULL, -1); setlocale(LC_CTYPE, ""); DEBUG(2, "Iconv to \"%s\"\n", locale_charset); ni = strlen(ucc); no = size; utf8 = iconv_open(locale_charset, "UTF-8"); nrc = iconv(utf8, &ucc, &ni, &cc, &no); ret = iconv_close(utf8); if (nrc != (size_t)(-1)) { DEBUG(2, "Iconv from locale conversion error: '%s'\n", cc); } return size-no; #else /* HAVE_ICONV */ int n, i; n = strlen(uc); strncpy(c, uc, size); c[size] = '\0'; return n; #endif /* HAVE_ICONV */ #endif /* _WIN32 */ } obexftp-0.23/obexftp/bt_kit.h0000644000076600000240000000646611146600644013137 00000000000000/** \file obexftp/bt_kit.h Bluetooth, SDP, HCI kit for Linux, FreeBSD, NetBSD and Win32. ObexFTP library - language bindings for OBEX file transfer. Copyright (c) 2007 Christian W. Zuckschwerdt ObexFTP is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with ObexFTP. If not, see . */ #ifdef HAVE_CONFIG_H #include #endif #ifndef BTKITSYM #define BTKITSYM __attribute__ ((visibility ("hidden"))) #endif #ifdef HAVE_BLUETOOTH //#ifndef _WIN32 //#include //#include //#include //#endif /* _WIN32 */ /* Windows with headers files from the Platform SDK */ #ifdef _WIN32 #include #include //#include //#include #define ESOCKTNOSUPPORT WSAESOCKTNOSUPPORT #define ETIMEDOUT WSAETIMEDOUT #define ECONNREFUSED WSAECONNREFUSED #define EHOSTDOWN WSAEHOSTDOWN #define EINPROGRESS WSAEINPROGRESS #define bdaddr_t BTH_ADDR #define sockaddr_rc _SOCKADDR_BTH #define rc_family addressFamily #define rc_bdaddr btAddr #define rc_channel port #define PF_BLUETOOTH PF_BTH #define AF_BLUETOOTH PF_BLUETOOTH #define BTPROTO_RFCOMM BTHPROTO_RFCOMM #define BDADDR_ANY (&(BTH_ADDR){BTH_ADDR_NULL}) #define bacpy(dst,src) memcpy((dst),(src),sizeof(BTH_ADDR)) #define bacmp(a,b) memcmp((a),(b),sizeof(BTH_ADDR)) BTKITSYM int ba2str(const bdaddr_t *btaddr, char *straddr); BTKITSYM int str2ba(const char *straddr, BTH_ADDR *btaddr); /* FreeBSD 5 and up */ #elif defined(__FreeBSD__) //#include #include #define sockaddr_rc sockaddr_rfcomm #define rc_family rfcomm_family #define rc_bdaddr rfcomm_bdaddr #define rc_channel rfcomm_channel #define BTPROTO_RFCOMM BLUETOOTH_PROTO_RFCOMM #define BDADDR_ANY (&(bdaddr_t) {{0, 0, 0, 0, 0, 0}}) /* NetBSD-4 and up */ #elif defined(__NetBSD__) #include #include #define sockaddr_rc sockaddr_bt #define rc_family bt_family #define rc_bdaddr bt_bdaddr #define rc_channel bt_channel #define BDADDR_ANY NG_HCI_BDADDR_ANY /* BlueZ, Linux 2.4.6 and up (incl. 2.6) */ #else #include #include #include #include #include #include #endif /* _WIN32 */ /* library setup/teardown functions (needed for win32) */ BTKITSYM int btkit_init(); BTKITSYM int btkit_exit(); /* additional functions */ BTKITSYM char **btkit_discover(const char *src); /* HCI no. or address */ BTKITSYM char *btkit_getname(const char *src, const char *addr); BTKITSYM int btkit_browse(const char *src, const char *addr, int svclass); BTKITSYM int btkit_register_obex(int svclass, int channel); BTKITSYM int btkit_unregister_service(int svclass); //KITSYM int btkit_open_rfcomm(char *src, char *dest, int channel); #endif /* HAVE_BLUETOOTH */ obexftp-0.23/obexftp/bt_kit.c0000644000076600000240000004017711146600644013127 00000000000000/** \file obexftp/bt_kit.c Bluetooth, SDP, HCI kit for Linux, FreeBSD, NetBSD and Win32. ObexFTP library - language bindings for OBEX file transfer. Copyright (c) 2007 Christian W. Zuckschwerdt ObexFTP is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with ObexFTP. If not, see . */ #ifdef HAVE_CONFIG_H #include #endif #include #include #include #ifdef _WIN32 #include #include #define WSA_VER_MAJOR 2 #define WSA_VER_MINOR 2 #else #include #include #include #endif /* _WIN32 */ #include "bt_kit.h" #include /** Nokia OBEX PC Suite Services. binary representation of 00005005-0000-1000-8000-0002ee000001 \note prefer this over FTP on Series 60 devices */ #define __SVC_UUID_PCSUITE_bytes \ { 0x00, 0x00, 0x50, 0x05, \ 0x00, 0x00, 0x10, 0x00, 0x80, 0x00, \ 0x00, 0x02, 0xee, 0x00, 0x00, 0x01 } #define SVC_UUID_PCSUITE ((const uint8_t []) __SVC_UUID_PCSUITE_bytes) /** Allocate and setup the network stack. \note Needed for win32 winsock compatibility. */ int btkit_init() { #ifdef _WIN32 WORD wVersionRequired = MAKEWORD(WSA_VER_MAJOR,WSA_VER_MINOR); WSADATA lpWSAData; if (WSAStartup(wVersionRequired, &lpWSAData) != 0) { DEBUG(2, "%s: WSAStartup failed (%d)\n", __func__, WSAGetLastError()); return -1; } if (LOBYTE(lpWSAData.wVersion) != WSA_VER_MAJOR || HIBYTE(lpWSAData.wVersion) != WSA_VER_MINOR) { DEBUG(2, "%s: WSA version mismatch\n", __func__); WSACleanup(); return -1; } #endif /* _WIN32 */ return 0; } /** Tear-down and free the network stack. \note Needed for win32 winsock compatibility. */ int btkit_exit() { #ifdef _WIN32 if (WSACleanup() != 0) { DEBUG(2, "%s: WSACleanup failed (%d)\n", __func__, WSAGetLastError()); return -1; } #endif /* _WIN32 */ return 0; } #ifdef HAVE_BLUETOOTH #ifdef _WIN32 //void baswap(bdaddr_t *dst, const bdaddr_t *src) //bdaddr_t *strtoba(const char *str) //char *batostr(const bdaddr_t *ba) /** Implementation of ba2str for winsock2. */ int ba2str(const bdaddr_t *btaddr, char *straddr) { /* WSAAddressToString() is not useful, it adds parentheses */ unsigned char *b = btaddr; return sprintf(straddr, "%2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X", b[7], b[6], b[5], b[4], b[3], b[2]); } /** Implementation of str2ba for winsock2. */ int str2ba(const char *straddr, bdaddr_t *btaddr) { int i; unsigned int aaddr[6]; bdaddr_t tmpaddr = 0; if (sscanf(straddr, "%02x:%02x:%02x:%02x:%02x:%02x", &aaddr[0], &aaddr[1], &aaddr[2], &aaddr[3], &aaddr[4], &aaddr[5]) != 6) return 1; *btaddr = 0; for (i = 0; i < 6; i++) { tmpaddr = (bdaddr_t) (aaddr[i] & 0xff); *btaddr = ((*btaddr) << 8) + tmpaddr; } return 0; } char **btkit_discover(const char *src) { unsigned int ret; WSAQUERYSET querySet; char addressAsString[18]; char **res, **p; memset(&querySet, 0, sizeof(querySet)); querySet.dwSize = sizeof(querySet); querySet.dwNameSpace = NS_BTH; HANDLE hLookup; DWORD flags = LUP_CONTAINERS | LUP_FLUSHCACHE | LUP_RETURN_ADDR | LUP_RES_SERVICE; ret = WSALookupServiceBegin(&querySet, flags, &hLookup); if (ret != 0) { DEBUG(2, "%s: WSALookupServiceBegin failed (%d)\n", __func__, WSAGetLastError()); } p = res = calloc(15 + 1, sizeof(char *)); for (;;) { BYTE buffer[1000]; DWORD bufferLength = sizeof(buffer); WSAQUERYSET *pResults = (WSAQUERYSET*)&buffer; ret = WSALookupServiceNext(hLookup, flags, &bufferLength, pResults); if (GetLastError() == WSA_E_NO_MORE) { break; } if (ret != 0) { DEBUG(2, "%s: WSALookupServiceNext failed (%d)\n", __func__, WSAGetLastError()); } ba2str(pResults->lpcsaBuffer->RemoteAddr.lpSockaddr, addressAsString); DEBUG(3, "%s: Found\t%s\n", __func__, addressAsString); *p++ = strdup(addressAsString); } ret = WSALookupServiceEnd(hLookup); if (ret != 0) { DEBUG(2, "%s: WSALookupServiceEnd failed (%d)\n", __func__, WSAGetLastError()); } return res; } char *btkit_getname(const char *src, const char *addr) { unsigned int ret; WSAQUERYSET querySet; char addressAsString[18]; char *res = NULL; memset(&querySet, 0, sizeof(querySet)); querySet.dwSize = sizeof(querySet); querySet.dwNameSpace = NS_BTH; HANDLE hLookup; DWORD flags = LUP_CONTAINERS | LUP_FLUSHCACHE | LUP_RETURN_ADDR | LUP_RES_SERVICE; ret = WSALookupServiceBegin(&querySet, flags, &hLookup); if (ret != 0) { DEBUG(2, "%s: WSALookupServiceBegin failed (%d)\n", __func__, WSAGetLastError()); } for (;;) { BYTE buffer[1000]; DWORD bufferLength = sizeof(buffer); WSAQUERYSET *pResults = (WSAQUERYSET*)&buffer; ret = WSALookupServiceNext(hLookup, flags | LUP_RETURN_NAME, &bufferLength, pResults); if (GetLastError() == WSA_E_NO_MORE) { break; } if (ret != 0) { DEBUG(2, "%s: WSALookupServiceNext failed (%d)\n", __func__, WSAGetLastError()); } ba2str(pResults->lpcsaBuffer->RemoteAddr.lpSockaddr, addressAsString); if (!strcmp(addressAsString, addr)) { DEBUG(3, "%s: Found\t%s\n", __func__, pResults->lpszServiceInstanceName); res = pResults->lpszServiceInstanceName; break; } DEBUG(3, "%s: Skipping\t%s\n", __func__, pResults->lpszServiceInstanceName); } ret = WSALookupServiceEnd(hLookup); if (ret != 0) { DEBUG(2, "%s: WSALookupServiceEnd failed (%d)\n", __func__, WSAGetLastError()); } return res; } // http://msdn2.microsoft.com/en-us/library/aa362914.aspx int btkit_browse(const char *src, const char *addr, int svclass) { unsigned int ret; WSAQUERYSET querySet; char addressAsString[20]; DWORD addressSize = sizeof(addressAsString); memset(&querySet, 0, sizeof(querySet)); querySet.dwSize = sizeof(querySet); querySet.dwNameSpace = NS_BTH; // querySet.lpServiceClassId = RFCOMM; querySet.lpszContext = addressAsString; if (0 == WSAAddressToString(lpSockaddr, sizeof(bdaddr_t), NULL, addressAsString, &addressSize)) { printf("search address: %s\n", addressAsString); } HANDLE hLookup; DWORD flags = LUP_NOCONTAINERS | LUP_FLUSHCACHE | LUP_RETURN_ADDR | LUP_RES_SERVICE | LUP_RETURN_NAME | LUP_RETURN_TYPE | LUP_RETURN_BLOB; ret = WSALookupServiceBegin(&querySet, flags, &hLookup); if (ret != 0) { DEBUG(2, "%s: WSALookupServiceBegin failed (%d)\n", __func__, WSAGetLastError()); } for (;;) { BYTE buffer[1000]; DWORD bufferLength = sizeof(buffer); WSAQUERYSET *pResults = (WSAQUERYSET*)&buffer; ret = WSALookupServiceNext(hLookup, flags, &bufferLength, pResults); if (GetLastError() == WSA_E_NO_MORE) { break; } if (ret != 0) { DEBUG(2, "%s: WSALookupServiceNext failed (%d)\n", __func__, WSAGetLastError()); } DEBUG(3, "%s: Found\t%s\n", __func__, pResults->lpszServiceInstanceName); } ret = WSALookupServiceEnd(hLookup); if (ret != 0) { DEBUG(2, "%s: WSALookupServiceEnd failed (%d)\n", __func__, WSAGetLastError()); } return 0; } #else /* _WIN32 */ #ifdef HAVE_SDPLIB /* should switch on OS here */ /** Discover all bluetooth devices in range. \param src optional source interface address (HCI or MAC) \return an array of device addresses */ char **btkit_discover(const char *src) { char **res; inquiry_info *info = NULL; bdaddr_t bdswap; int dev_id; int num_rsp = 10; int flags = 0; int length = 8; int dd, i; /* Get local bluetooth address */ if (src && strlen(src) == 17) dev_id = hci_devid(src); else if (src) dev_id = atoi(src); else dev_id = hci_get_route(NULL); DEBUG(2, "%s: Scanning ...\n", __func__); flags = IREQ_CACHE_FLUSH; /* only show devices currently in range */ num_rsp = hci_inquiry(dev_id, length, num_rsp, NULL, &info, flags); if(num_rsp < 0) { DEBUG(1, "%s: Inquiry failed", __func__); return NULL; } dd = hci_open_dev(dev_id); if (dd < 0) { DEBUG(1, "%s: HCI device open failed", __func__); free(info); return NULL; } res = calloc(num_rsp + 1, sizeof(char *)); for(i = 0; i < num_rsp; i++) { baswap(&bdswap, &(info+i)->bdaddr); res[i] = batostr(&bdswap); DEBUG(2, "%s: Found\t%s\n", __func__, res[i]); } hci_close_dev(dd); free(info); return res; } /** Get the name of a bluetooth device. \param src optional source interface address (HCI or MAC) \param addr the bluetooth address of the device to query \return the bluetooth name of the device */ char *btkit_getname(const char *src, const char *addr) { bdaddr_t bdaddr; int dev_id, dd; char name[248]; return_val_if_fail(addr != NULL, NULL); str2ba(addr, &bdaddr); /* Get local bluetooth address */ if (src && strlen(src) == 17) dev_id = hci_devid(src); else if (src) dev_id = atoi(src); else dev_id = hci_get_route(NULL); dd = hci_open_dev(dev_id); if (dd < 0) { DEBUG(1, "%s: HCI device open failed", __func__); return NULL; } if(hci_read_remote_name(dd, &bdaddr, sizeof(name), name, 100000) < 0) { strcpy(name, "No Name"); } hci_close_dev(dd); return strdup(name); } static int browse_sdp_uuid(sdp_session_t *sess, uuid_t *uuid) { sdp_list_t *attrid, *search, *seq, *loop; uint32_t range = SDP_ATTR_PROTO_DESC_LIST; /* 0x0000ffff for SDP_ATTR_REQ_RANGE */ int channel = -1; attrid = sdp_list_append(0, &range); search = sdp_list_append(0, uuid); /* Get a linked list of services */ if(sdp_service_search_attr_req(sess, search, SDP_ATTR_REQ_INDIVIDUAL, attrid, &seq) < 0) { DEBUG(1, "%s: SDP service search failed", __func__); sdp_close(sess); return -1; } sdp_list_free(attrid, 0); sdp_list_free(search, 0); /* Loop through the list of services */ for(loop = seq; loop; loop = loop->next) { sdp_record_t *rec = (sdp_record_t *) loop->data; sdp_list_t *access = NULL; /* get the RFCOMM channel */ sdp_get_access_protos(rec, &access); if(access) { channel = sdp_get_proto_port(access, RFCOMM_UUID); } } sdp_list_free(seq, 0); return channel; } /** Browse a bluetooth device for a given service class. \param src optional source interface address (HCI or MAC) \param addr the bluetooth address of the device to query \return the channel on which the service runs */ // Win32 note: // WSALookupServiceBegin( WSAQUERYSET with // dwNameSpace = NS_BTH // lpServiceClassId = RFCOMM // lpszContext = WSAAddressToString ) // WSALookupServiceNext // WSALookupServiceEnd int btkit_browse(const char *src, const char *addr, int svclass) { int res = -1; int dev_id; sdp_session_t *sess; uuid_t root_uuid; bdaddr_t bdaddr; if (!addr || strlen(addr) != 17) return -1; str2ba(addr, &bdaddr); /* Get local bluetooth address */ if (src && strlen(src) == 17) dev_id = hci_devid(src); else if (src) dev_id = atoi(src); else dev_id = hci_get_route(NULL); /* Connect to remote SDP server */ sess = sdp_connect(BDADDR_ANY, &bdaddr, SDP_RETRY_IF_BUSY); if(!sess) { DEBUG(1, "%s: Failed to connect to SDP server", __func__); return -1; } // baswap(&bdswap, &bdaddr); // *res_bdaddr = batostr(&bdswap); // fprintf(stderr, "Browsing %s ...\n", *res_bdaddr); /* determine the service class we're looking for */ if ((svclass != IRMC_SYNC_SVCLASS_ID) && (svclass != OBEX_OBJPUSH_SVCLASS_ID) && (svclass != OBEX_FILETRANS_SVCLASS_ID)) { svclass = OBEX_FILETRANS_SVCLASS_ID; /* or OBEX_FILETRANS_PROFILE_ID? */ } /* prefer PCSUITE over FTP */ if (svclass == OBEX_FILETRANS_SVCLASS_ID) { sdp_uuid128_create(&root_uuid, &SVC_UUID_PCSUITE); res = browse_sdp_uuid(sess, &root_uuid); if (res > 0) return res; } /* browse for the service class */ sdp_uuid16_create(&root_uuid, svclass); res = browse_sdp_uuid(sess, &root_uuid); sdp_close(sess); return res; } /** Search for OBEX FTP service. \return 1 if service is found and 0 otherwise */ static sdp_record_t *sdp_search_service(sdp_session_t *sess, uint16_t service) { sdp_list_t *attrid, *srch, *rsp = NULL; uint32_t range = 0x0000ffff; uuid_t svclass; int ret; attrid = sdp_list_append(0, &range); sdp_uuid16_create(&svclass, service); srch = sdp_list_append(NULL, &svclass); ret = sdp_service_search_attr_req(sess, srch, SDP_ATTR_REQ_RANGE, attrid, &rsp); sdp_list_free(attrid, 0); sdp_list_free(srch, 0); if (ret < 0) { DEBUG(1, "Failed to search the local SDP server."); return NULL; } if (sdp_list_len(rsp) == 0) { DEBUG(1, "No records found on the local SDP server."); return NULL; } return (sdp_record_t *) rsp->data; } /** Delete a service record from the local SDP server. */ int btkit_unregister_service(int svclass) { sdp_session_t *session; sdp_record_t *record; session = sdp_connect(BDADDR_ANY, BDADDR_LOCAL, 0); if (!session) { DEBUG(1, "Failed to connect to the local SDP server."); return -1; } record = sdp_search_service(session, svclass); if (record && sdp_record_unregister(session, record)) DEBUG(1, "Service record unregistration failed."); sdp_close(session); } /** Add a service record to the local SDP server. */ int btkit_register_obex(int service, int channel) { sdp_session_t *session; sdp_record_t *record; sdp_list_t *svclass, *pfseq, *apseq, *root, *aproto; uuid_t root_uuid, l2cap, rfcomm, obex, obexftp; sdp_profile_desc_t profile; sdp_list_t *proto[3]; sdp_data_t *v; uint8_t channel_id = 1; /* should look for a free one */ int status; if (channel > 0) channel_id = channel; session = sdp_connect(BDADDR_ANY, BDADDR_LOCAL, 0); if (!session) { DEBUG(1, "Failed to connect to the local SDP server."); return -1; } record = sdp_record_alloc(); if (!record) { DEBUG(1, "Failed to allocate service record."); sdp_close(session); return -1; } /* Register to Public Browse Group */ sdp_uuid16_create(&root_uuid, PUBLIC_BROWSE_GROUP); root = sdp_list_append(NULL, &root_uuid); sdp_set_browse_groups(record, root); sdp_list_free(root, NULL); /* Protocol Descriptor List: L2CAP */ sdp_uuid16_create(&l2cap, L2CAP_UUID); proto[0] = sdp_list_append(NULL, &l2cap); apseq = sdp_list_append(NULL, proto[0]); /* Protocol Descriptor List: RFCOMM */ sdp_uuid16_create(&rfcomm, RFCOMM_UUID); proto[1] = sdp_list_append(NULL, &rfcomm); v = sdp_data_alloc(SDP_UINT8, &channel_id); proto[1] = sdp_list_append(proto[1], v); apseq = sdp_list_append(apseq, proto[1]); /* Protocol Descriptor List: OBEX */ sdp_uuid16_create(&obex, OBEX_UUID); proto[2] = sdp_list_append(NULL, &obex); apseq = sdp_list_append(apseq, proto[2]); aproto = sdp_list_append(NULL, apseq); sdp_set_access_protos(record, aproto); sdp_list_free(proto[0], NULL); sdp_list_free(proto[1], NULL); sdp_list_free(proto[2], NULL); sdp_list_free(apseq, NULL); sdp_list_free(aproto, NULL); sdp_data_free(v); /* Service Class ID List: */ sdp_uuid16_create(&obexftp, service); svclass = sdp_list_append(NULL, &obexftp); sdp_set_service_classes(record, svclass); /* Profile Descriptor List: */ /* profile id matches service id here */ sdp_uuid16_create(&profile.uuid, service); profile.version = 0x0100; pfseq = sdp_list_append(NULL, &profile); sdp_set_profile_descs(record, pfseq); sdp_set_info_attr(record, "OBEX File Transfer", NULL, NULL); status = sdp_device_record_register(session, BDADDR_ANY, record, SDP_RECORD_PERSIST); if (status < 0) { DEBUG(1, "SDP registration failed."); sdp_record_free(record); record = NULL; sdp_close(session); return -1; } sdp_close(session); return 0; } #else #warning "no bluetooth sdp support for this platform" char **btkit_discover(const char *UNUSED(src)) { return NULL; } char *btkit_getname(const char *UNUSED(src), const char *UNUSED(addr)) { return NULL; } int btkit_browse(const char *UNUSED(src), const char *UNUSED(addr), int UNUSED(svclass)) { return -1; } int btkit_register_obex(int UNUSED(svclass), int UNUSED(channel)) { DEBUG(1, "SDP not supported."); return -1; } int btkit_unregister_service(int UNUSED(svclass)) { return -1; } #endif /* HAVE_SDPLIB */ #endif /* _WIN32 */ #else #warning "bluetooth not available" #endif /* HAVE_BLUETOOTH */ obexftp-0.23/obexftp/client.c0000644000076600000240000010131511146600644013121 00000000000000/** \file obexftp/client.c ObexFTP client API implementation. ObexFTP library - language bindings for OBEX file transfer. Copyright (c) 2002-2007 Christian W. Zuckschwerdt ObexFTP is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with ObexFTP. If not, see . */ #ifdef HAVE_CONFIG_H #include #endif #define _GNU_SOURCE #include #include #include #include #include #include #include #include #ifdef HAVE_SYS_TIME_H #include #endif #include #ifdef _WIN32 #define O_BINARY (_O_BINARY) #define CREATE_MODE_FILE (S_IRUSR|S_IWUSR) #else #include #include #include #define O_BINARY (0) #define CREATE_MODE_FILE (S_IRUSR|S_IWUSR|S_IRGRP|S_IROTH) #endif /* _WIN32 */ #ifdef HAVE_BLUETOOTH #include "bt_kit.h" #else #define ESOCKTNOSUPPORT WSAESOCKTNOSUPPORT #endif /* HAVE_BLUETOOTH */ #include #include #include "obexftp.h" #include "client.h" #include "object.h" #include "obexftp_io.h" #include "uuid.h" #include "cache.h" #include #pragma pack(1) typedef struct { /* fixed to 6 bytes for now */ uint8_t code; uint8_t info_len; uint8_t info[4]; } apparam_t; #pragma pack() /** Empty callback used as default. */ static void dummy_info_cb(int UNUSED(event), const char *UNUSED(msg), int UNUSED(len), void *UNUSED(data)) { /* do nothing */ } /** Normalize the path argument. \note wont turn relative paths into (most likely wrong) absolute ones. wont expand "../" or "./". */ /* static char *normalize_file_path(const char *name) { char *p, *copy; return_val_if_fail(name != NULL, NULL); p = copy = malloc(strlen(name) + 1); / * cant be longer, can it? * / / * if (OBEXFTP_USE_LEADING_SLASH(quirks)) *p++ = '/'; while (*name == '/') name++; * / while (*name) { if (*name == '/') { *p++ = *name++; while (*name == '/') name++; } else { *p++ = *name++; } } *p = '\0'; return copy; } */ /** Normalize the path argument and split into pathname and basename. \note Wont turn relative paths into (most likely wrong) absolute ones. Wont expand "../" or "./". Will keep "telecom" prefix. \warning Do not use this function if there is no slash in the argument! */ static void split_file_path(const char *name, /*@only@*/ char **basepath, /*@only@*/ char **basename) { char *p; const char *tail; return_if_fail(name != NULL); for (tail = name; *tail == '/'; tail++); if (!strncmp(tail, "telecom/", 8)) { *basename = strdup(tail); /* keep whole path */ *basepath = strdup(""); /* cd top */ return; } tail = strrchr(name, '/'); if (tail) tail++; else tail = name; if (basename) *basename = strdup(tail); if (!basepath) return; p = *basepath = malloc(strlen(name) + 1); /* cant be longer, can it? */ /* if (OBEXFTP_USE_LEADING_SLASH(quirks)) *p++ = '/'; while (*name == '/') name++; */ while (*name && name < tail) { if (*name == '/') { *p++ = *name++; while (*name == '/') name++; } else { *p++ = *name++; } } /* if (p > *basepath && *(p-1) == '/') p--; if (OBEXFTP_USE_TRAILING_SLASH(quirks)) *p++ = '/'; */ *p = '\0'; } /** Add more data from memory to stream. */ static int cli_fillstream_from_memory(obexftp_client_t *cli, obex_object_t *object) { obex_headerdata_t hv; int actual = cli->out_size - cli->out_pos; if (actual > STREAM_CHUNK) actual = STREAM_CHUNK; DEBUG(3, "%s() Read %d bytes\n", __func__, actual); if(actual > 0) { /* Read was ok! */ hv.bs = (const uint8_t *) &cli->out_data[cli->out_pos]; (void) OBEX_ObjectAddHeader(cli->obexhandle, object, OBEX_HDR_BODY, hv, actual, OBEX_FL_STREAM_DATA); cli->out_pos += actual; } else if(actual == 0) { /* EOF */ cli->out_data = NULL; /* dont free, isnt ours */ hv.bs = (const uint8_t *) &cli->out_data[cli->out_pos]; (void) OBEX_ObjectAddHeader(cli->obexhandle, object, OBEX_HDR_BODY, hv, 0, OBEX_FL_STREAM_DATAEND); } else { /* Error */ cli->out_data = NULL; /* dont free, isnt ours */ hv.bs = (const uint8_t *) NULL; (void) OBEX_ObjectAddHeader(cli->obexhandle, object, OBEX_HDR_BODY, hv, 0, OBEX_FL_STREAM_DATA); } return actual; } /** Add more data from file to stream. */ static int cli_fillstream_from_file(obexftp_client_t *cli, obex_object_t *object) { obex_headerdata_t hv; int actual; DEBUG(3, "%s()\n", __func__); actual = read(cli->fd, cli->stream_chunk, STREAM_CHUNK); DEBUG(3, "%s() Read %d bytes\n", __func__, actual); if(actual > 0) { /* Read was ok! */ hv.bs = (const uint8_t *) cli->stream_chunk; (void) OBEX_ObjectAddHeader(cli->obexhandle, object, OBEX_HDR_BODY, hv, actual, OBEX_FL_STREAM_DATA); } else if(actual == 0) { /* EOF */ (void) close(cli->fd); cli->fd = -1; hv.bs = (const uint8_t *) cli->stream_chunk; (void) OBEX_ObjectAddHeader(cli->obexhandle, object, OBEX_HDR_BODY, hv, 0, OBEX_FL_STREAM_DATAEND); } else { /* Error */ (void) close(cli->fd); cli->fd = -1; hv.bs = (const uint8_t *) NULL; (void) OBEX_ObjectAddHeader(cli->obexhandle, object, OBEX_HDR_BODY, hv, 0, OBEX_FL_STREAM_DATA); } return actual; } /** Save body from object or return application parameters. */ static void client_done(obex_t *handle, obex_object_t *object, int UNUSED(obex_cmd), int UNUSED(obex_rsp)) { obex_headerdata_t hv; uint8_t hi; uint32_t hlen; const apparam_t *app = NULL; uint8_t *p; const uint8_t *body_data = NULL; uint32_t body_len = -1; /*@temp@*/ obexftp_client_t *cli; cli = OBEX_GetUserData(handle); DEBUG(3, "%s()\n", __func__); if (cli->fd > 0) (void) close(cli->fd); if (cli->buf_data) { DEBUG(1, "%s: Warning: buffer still active?\n", __func__); } while(OBEX_ObjectGetNextHeader(handle, object, &hi, &hv, &hlen)) { if(hi == OBEX_HDR_BODY) { DEBUG(3, "%s() Found body (length: %d)\n", __func__, hlen); if (cli->target_fn == NULL) { if (cli->buf_data) { DEBUG(1, "%s: Warning: purging non-empty buffer.\n", __func__); /* ok to free since we must have malloc' it right here */ free(cli->buf_data); } p = malloc(hlen + 1); if (p) { memcpy(p, hv.bs, hlen); p[hlen] = '\0'; cli->buf_size = hlen; cli->buf_data = p; } } body_len = hlen; body_data = hv.bs; cli->infocb(OBEXFTP_EV_BODY, hv.bs, hlen, cli->infocb_data); DEBUG(3, "%s() Done body\n", __func__); /* break; */ } else if(hi == OBEX_HDR_CONNECTION) { DEBUG(3, "%s() Found connection number: %d\n", __func__, hv.bq4); cli->connection_id = hv.bq4; } else if(hi == OBEX_HDR_WHO) { DEBUG(3, "%s() Sender identified\n", __func__); } else if(hi == OBEX_HDR_NAME) { DEBUG(3, "%s() Sender name\n", __func__); DEBUGBUFFER(hv.bs, hlen); } else if(hi == OBEX_HDR_APPARAM) { DEBUG(3, "%s() Found application parameters\n", __func__); if(hlen == sizeof(apparam_t)) { app = (const apparam_t *)hv.bs; /* order is network byte order (big-endian) */ cli->apparam_info = (app->info[0] << (3*8)) + (app->info[1] << (2*8)) + (app->info[2] << (1*8)) + (app->info[3] << (0*8)); cli->infocb(OBEXFTP_EV_INFO, (char*)&cli->apparam_info, 0, cli->infocb_data); } else DEBUG(3, "%s() Application parameters don't fit %d vs. %d.\n", __func__, hlen, sizeof(apparam_t)); break; } else { DEBUG(3, "%s() Skipped header %02x\n", __func__, hi); } } if(body_data) { if (body_len > 0) { if (cli->target_fn != NULL) { /* simple body writer */ int fd; //fd = open_safe("", cli-> target_fn); fd = open(cli-> target_fn, O_WRONLY | O_CREAT | O_TRUNC | O_BINARY, CREATE_MODE_FILE); if(fd > 0) { (void) write(fd, body_data, body_len); (void) close(fd); } else { DEBUG(3, "%s() Error writing body\n", __func__); } free (cli->target_fn); cli->target_fn = NULL; } else { DEBUG(3, "%s() Body not written\n", __func__); } } else { DEBUG(3, "%s() Skipping empty body\n", __func__); } } if(app) { DEBUG(3, "%s() Appcode %d, data (%d) %d\n", __func__, app->code, app->info_len, cli->apparam_info); } } /** Handle incoming event from OpenOBEX. */ static void cli_obex_event(obex_t *handle, obex_object_t *object, int UNUSED(mode), int event, int obex_cmd, int obex_rsp) { /*@temp@*/ obexftp_client_t *cli; cli = OBEX_GetUserData(handle); switch (event) { case OBEX_EV_PROGRESS: cli->infocb(OBEXFTP_EV_PROGRESS, "", 0, cli->infocb_data); break; case OBEX_EV_REQDONE: cli->finished = TRUE; if(obex_rsp == OBEX_RSP_SUCCESS) cli->success = TRUE; else { cli->success = FALSE; DEBUG(2, "%s() OBEX_EV_REQDONE: obex_rsp=%02x\n", __func__, obex_rsp); } cli->obex_rsp = obex_rsp; client_done(handle, object, obex_cmd, obex_rsp); break; case OBEX_EV_LINKERR: cli->finished = TRUE; cli->success = FALSE; DEBUG(2, "%s() OBEX_EV_LINKERR\n", __func__); break; case OBEX_EV_STREAMEMPTY: if (cli->out_data) (void) cli_fillstream_from_memory(cli, object); else (void) cli_fillstream_from_file(cli, object); break; default: DEBUG(1, "%s() Unknown event %d\n", __func__, event); break; } } /** Wait for the OBEX client to finish. */ static int obexftp_sync(obexftp_client_t *cli) { int ret; DEBUG(3, "%s()\n", __func__); /* cli->finished = FALSE; */ while(cli->finished == FALSE) { ret = OBEX_HandleInput(cli->obexhandle, 20); DEBUG(3, "%s() OBEX_HandleInput = %d\n", __func__, ret); if (ret <= 0) { DEBUG(2, "%s() OBEX_HandleInput error: %d\n", __func__, errno); return -1; } } DEBUG(3, "%s() Done success=%d\n", __func__, cli->success); if(cli->success) return 1; else return - cli->obex_rsp; } /** Do an OBEX request synchronous. */ static int cli_sync_request(obexftp_client_t *cli, obex_object_t *object) { DEBUG(3, "%s()\n", __func__); if (cli->finished == FALSE) return -EBUSY; cli->finished = FALSE; (void) OBEX_Request(cli->obexhandle, object); return obexftp_sync (cli); } /** Create an obexftp client. \param transport the transport type that will be used \param ctrans optional custom transport (don't use) \param infocb optional info callback \param infocb_data optional info callback data \return a new allocated ObexFTP client instance, NULL on error */ obexftp_client_t *obexftp_open(int transport, /*const*/ obex_ctrans_t *ctrans, obexftp_info_cb_t infocb, void *infocb_data) { obexftp_client_t *cli; DEBUG(3, "%s()\n", __func__); cli = calloc (1, sizeof(obexftp_client_t)); if(cli == NULL) return NULL; cli->finished = TRUE; if (infocb) cli->infocb = infocb; else cli->infocb = dummy_info_cb; cli->infocb_data = infocb_data; cli->quirks = DEFAULT_OBEXFTP_QUIRKS; cli->cache_timeout = DEFAULT_CACHE_TIMEOUT; cli->cache_maxsize = DEFAULT_CACHE_MAXSIZE; cli->fd = -1; cli->obexhandle = OBEX_Init(transport, cli_obex_event, 0); if(cli->obexhandle == NULL) { free(cli); return NULL; } cli->transport = transport; if ( ctrans ) { DEBUG(2, "Custom OBEX transport requested!\n"); /* OBEX_RegisterCTransport is const to ctrans ... */ if(OBEX_RegisterCTransport(cli->obexhandle, ctrans) < 0) { DEBUG(1, "Custom transport callback-registration failed\n"); } cli->ctrans = ctrans; } OBEX_SetUserData(cli->obexhandle, cli); /* Buffer for body */ cli->stream_chunk = malloc(STREAM_CHUNK); if(cli->stream_chunk == NULL) { free(cli); return NULL; } return cli; } /** Close an obexftp client and free the resources. \param cli the obexftp_client_t to be shut done and free'd. It's save to pass NULL here. Closes the given obexftp client and frees the resources. It's recommended to set the client reference to NULL afterwards. */ void obexftp_close(obexftp_client_t *cli) { DEBUG(3, "%s()\n", __func__); return_if_fail(cli != NULL); OBEX_Cleanup(cli->obexhandle); if (cli->buf_data) { DEBUG(1, "%s: Warning: purging left-over buffer.\n", __func__); free(cli->buf_data); } cache_purge(&cli->cache, NULL); free(cli->stream_chunk); free(cli); } /** Do simple connect as client. \param cli an obexftp_client_t created by obexftp_open(). \param device the device address to connect to (transport specific) \param port the port/channel for the device address \param uuid UUID string for CONNECT (no default) \param uuid_len length of the UUID string (excluding terminating zero) \return the result of the CONNECT request, -1 on error \note Wrapper function for obexftp_connect_src() \warning Always use a UUID (except for OBEX PUSH) */ int obexftp_connect_uuid(obexftp_client_t *cli, const char *device, int port, const uint8_t uuid[], uint32_t uuid_len) { return obexftp_connect_src(cli, NULL, device, port, uuid, uuid_len); } int obexftp_connect_service(obexftp_client_t *cli, const char *src, const char *device, int port, int service) { uint8_t *uuid = NULL; uint32_t uuid_len = 0; if (service == OBEX_FTP_SERVICE) { uuid = UUID_FBS; uuid_len = sizeof(UUID_FBS); } if (service == OBEX_SYNC_SERVICE) { uuid = UUID_IRMC; uuid_len = sizeof(UUID_IRMC); } // otherwiese default to OBEX_PUSH_SERVICE return obexftp_connect_src(cli, src, device, port, uuid, uuid_len); } /** Connect this ObexFTP client using a given source address by sending an OBEX CONNECT request. \param cli an obexftp_client_t created by obexftp_open(). \param src optional local source interface address (transport specific) \param device the device address to connect to (transport specific) \param port the port/channel for the device address \param uuid UUID string for CONNECT (no default) \param uuid_len length of the UUID string (excluding terminating zero) \return the result of the CONNECT request, -1 on error \note Always use a UUID (except for OBEX PUSH) */ int obexftp_connect_src(obexftp_client_t *cli, const char *src, const char *device, int port, const uint8_t uuid[], uint32_t uuid_len) { struct sockaddr_in peer; #ifdef HAVE_BLUETOOTH char *devicedup, *devicep; bdaddr_t bdaddr, src_addr; #endif #ifdef HAVE_USB int obex_intf_cnt; obex_interface_t *obex_intf; #endif obex_object_t *object; obex_headerdata_t hv; int ret = -1; /* no connection yet */ DEBUG(3, "%s()\n", __func__); return_val_if_fail(cli != NULL, -EINVAL); cli->infocb(OBEXFTP_EV_CONNECTING, "", 0, cli->infocb_data); switch (cli->transport) { case OBEX_TRANS_IRDA: ret = IrOBEX_TransportConnect(cli->obexhandle, "OBEX"); DEBUG(3, "%s() IR %d\n", __func__, ret); break; case OBEX_TRANS_INET: if (!device) { ret = -EINVAL; break; } #ifdef _WIN32 peer.sin_addr.s_addr = inet_addr(device); ret = (peer.sin_addr.s_addr == INADDR_NONE) ? 0 : 1; #else ret = inet_aton(device, &peer.sin_addr); #endif if (ret) { peer.sin_family = AF_INET; peer.sin_port = htons(port); /* overridden with OBEX_PORT 650 anyhow */ ret = InOBEX_TransportConnect(cli->obexhandle, (struct sockaddr *) &peer, sizeof(struct sockaddr_in)); DEBUG(3, "%s() TCP %d\n", __func__, ret); } else ret = -EINVAL; /* is there a better errno? */ break; case OBEX_TRANS_CUSTOM: /* don't change the custom transport once it is in place */ if (cli->ctrans == NULL) { cli->ctrans = cobex_ctrans (device); if(OBEX_RegisterCTransport(cli->obexhandle, cli->ctrans) < 0) { DEBUG(1, "Custom transport callback-registration failed\n"); } } ret = OBEX_TransportConnect(cli->obexhandle, NULL, 0); DEBUG(3, "%s() TC %d\n", __func__, ret); break; #ifdef HAVE_BLUETOOTH case OBEX_TRANS_BLUETOOTH: if (!src) { bacpy(&src_addr, BDADDR_ANY); } #ifdef HAVE_SDPLIB else if (!strncmp(src, "hci", 3)) { hci_devba(atoi(src + 3), &src_addr); } else if (atoi(src) != 0) { hci_devba(atoi(src), &src_addr); } #endif else { str2ba(src, &src_addr); } if (!device) { ret = -EINVAL; break; } if (port < 1) { port = obexftp_browse_bt(device, 0); } /* transform some chars to colons */ devicedup = devicep = strdup(device); for (; *devicep; devicep++) { if (*devicep == '-') *devicep = ':'; if (*devicep == '_') *devicep = ':'; if (*devicep == '/') *devicep = ':'; } (void) str2ba(devicedup, &bdaddr); free(devicedup); ret = BtOBEX_TransportConnect(cli->obexhandle, &src_addr, &bdaddr, (uint8_t)port); DEBUG(3, "%s() BT %d\n", __func__, ret); break; #endif /* HAVE_BLUETOOTH */ #ifdef HAVE_USB case OBEX_TRANS_USB: obex_intf_cnt = OBEX_FindInterfaces(cli->obexhandle, &obex_intf); DEBUG(3, "%s() \n", __func__); if (obex_intf_cnt <= 0) { DEBUG(1, "%s() there are no valid USB interfaces\n", __func__); ret = -EINVAL; /* is there a better errno? */ } else if (port >= obex_intf_cnt) { DEBUG(1, "%s() %d is an invalid USB interface number\n", __func__, port); ret = -EINVAL; /* is there a better errno? */ } else ret = OBEX_InterfaceConnect(cli->obexhandle, &obex_intf[port]); DEBUG(3, "%s() USB %d\n", __func__, ret); break; #endif /* HAVE_USB */ default: ret = -ESOCKTNOSUPPORT; break; } if (ret < 0) { /* could be -EBUSY or -ESOCKTNOSUPPORT */ cli->infocb(OBEXFTP_EV_ERR, "connect", 0, cli->infocb_data); return ret; } #ifdef COMPAT_S45 // try S45 UUID first. object = OBEX_ObjectNew(cli->obexhandle, OBEX_CMD_CONNECT); hv.bs = UUID_S45; if(OBEX_ObjectAddHeader(cli->obexhandle, object, OBEX_HDR_TARGET, hv, sizeof(UUID_S45), OBEX_FL_FIT_ONE_PACKET) < 0) { DEBUG(1, "Error adding header\n"); OBEX_ObjectDelete(cli->obexhandle, object); return -1; } cli->connection_id = 0xffffffff; ret = cli_sync_request(cli, object); if(ret < 0) { cli->infocb(OBEXFTP_EV_ERR, "S45 UUID", 0, cli->infocb_data); #endif object = OBEX_ObjectNew(cli->obexhandle, OBEX_CMD_CONNECT); if (uuid) { hv.bs = uuid; if(OBEX_ObjectAddHeader(cli->obexhandle, object, OBEX_HDR_TARGET, hv, uuid_len, OBEX_FL_FIT_ONE_PACKET) < 0) { DEBUG(1, "Error adding header\n"); OBEX_ObjectDelete(cli->obexhandle, object); return -1; } } cli->connection_id = 0xffffffff; ret = cli_sync_request(cli, object); if (!OBEXFTP_USE_CONN_HEADER(cli->quirks)) cli->connection_id = 0xffffffff; #ifdef COMPAT_S45 } #endif if(ret < 0) cli->infocb(OBEXFTP_EV_ERR, "send UUID", 0, cli->infocb_data); else cli->infocb(OBEXFTP_EV_OK, "", 0, cli->infocb_data); return ret; } /** Disconnect this ObexFTP client by sending an OBEX DISCONNECT request. \param cli an obexftp_client_t created by obexftp_open(). \return the result of the DISCONNECT request */ int obexftp_disconnect(obexftp_client_t *cli) { obex_object_t *object; obex_headerdata_t hv; int ret; DEBUG(3, "%s()\n", __func__); return_val_if_fail(cli != NULL, -EINVAL); cli->infocb(OBEXFTP_EV_DISCONNECTING, "", 0, cli->infocb_data); object = OBEX_ObjectNew(cli->obexhandle, OBEX_CMD_DISCONNECT); if(cli->connection_id != 0xffffffff) { hv.bq4 = cli->connection_id; (void) OBEX_ObjectAddHeader(cli->obexhandle, object, OBEX_HDR_CONNECTION, hv, sizeof(uint32_t), OBEX_FL_FIT_ONE_PACKET); } ret = cli_sync_request(cli, object); if(ret < 0) cli->infocb(OBEXFTP_EV_ERR, "disconnect", 0, cli->infocb_data); else cli->infocb(OBEXFTP_EV_OK, "", 0, cli->infocb_data); /* don't -- obexftp_close will handle this with OBEX_Cleanup */ /* OBEX_TransportDisconnect(cli->obexhandle); */ return ret; } /** Send a custom Siemens OBEX app info opcode. \param cli an obexftp_client_t created by obexftp_open(). \param opcode the info opcode, 0x01 to inquire installed memory, 0x02 to get free memory \return the result of the app info request */ int obexftp_info(obexftp_client_t *cli, uint8_t opcode) { obex_object_t *object = NULL; int ret; return_val_if_fail(cli != NULL, -EINVAL); cli->infocb(OBEXFTP_EV_RECEIVING, "info", 0, cli->infocb_data); DEBUG(2, "%s() Retrieving info %d\n", __func__, opcode); object = obexftp_build_info (cli->obexhandle, cli->connection_id, opcode); if(object == NULL) return -1; ret = cli_sync_request(cli, object); if(ret < 0) { cli->infocb(OBEXFTP_EV_ERR, "info", 0, cli->infocb_data); } else cli->infocb(OBEXFTP_EV_OK, "info", 0, cli->infocb_data); return ret; } /** Send an OBEX GET with optional TYPE. Directories will be changed into first if split path quirk is set. \param cli an obexftp_client_t created by obexftp_open(). \param type OBEX TYPE of the request \param localname optional file to write \param remotename OBEX NAME to request \return the result of GET request \note \a localname and \a remotename may be null. */ int obexftp_get_type(obexftp_client_t *cli, const char *type, const char *localname, const char *remotename) { obex_object_t *object = NULL; int ret; return_val_if_fail(cli != NULL, -EINVAL); return_val_if_fail(remotename != NULL || type != NULL, -EINVAL); if (cli->buf_data) { DEBUG(1, "%s: Warning: buffer still active?\n", __func__); } cli->infocb(OBEXFTP_EV_RECEIVING, remotename, 0, cli->infocb_data); if (localname && *localname) cli->target_fn = strdup(localname); else cli->target_fn = NULL; if (OBEXFTP_USE_SPLIT_SETPATH(cli->quirks) && remotename && strchr(remotename, '/')) { char *basepath, *basename; split_file_path(remotename, &basepath, &basename); ret = obexftp_setpath(cli, basepath, 0); if(ret < 0) { cli->infocb(OBEXFTP_EV_ERR, basepath, 0, cli->infocb_data); return ret; } DEBUG(2, "%s() Getting %s -> %s (%s)\n", __func__, basename, localname, type); object = obexftp_build_get (cli->obexhandle, cli->connection_id, basename, type); free(basepath); free(basename); } else { DEBUG(2, "%s() Getting %s -> %s (%s)\n", __func__, remotename, localname, type); object = obexftp_build_get (cli->obexhandle, cli->connection_id, remotename, type); } if(object == NULL) return -1; ret = cli_sync_request(cli, object); if(ret < 0) cli->infocb(OBEXFTP_EV_ERR, remotename, 0, cli->infocb_data); else cli->infocb(OBEXFTP_EV_OK, remotename, 0, cli->infocb_data); return ret; } /** Send an custom Siemens OBEX rename request. \param cli an obexftp_client_t created by obexftp_open(). \param sourcename remote filename to be renamed \param targetname remote target filename \return the result of Siemens rename request */ int obexftp_rename(obexftp_client_t *cli, const char *sourcename, const char *targetname) { obex_object_t *object = NULL; int ret; return_val_if_fail(cli != NULL, -EINVAL); cli->infocb(OBEXFTP_EV_SENDING, sourcename, 0, cli->infocb_data); DEBUG(2, "%s() Moving %s -> %s\n", __func__, sourcename, targetname); object = obexftp_build_rename (cli->obexhandle, cli->connection_id, sourcename, targetname); if(object == NULL) return -1; cache_purge(&cli->cache, NULL); ret = cli_sync_request(cli, object); if(ret < 0) cli->infocb(OBEXFTP_EV_ERR, sourcename, 0, cli->infocb_data); else cli->infocb(OBEXFTP_EV_OK, sourcename, 0, cli->infocb_data); return ret; } /** Send an OBEX PUT with empty file name (delete). \param cli an obexftp_client_t created by obexftp_open(). \param name the remote filename/foldername to be removed. \return the result of the empty OBEX PUT request */ int obexftp_del(obexftp_client_t *cli, const char *name) { obex_object_t *object; int ret; return_val_if_fail(cli != NULL, -EINVAL); cli->infocb(OBEXFTP_EV_SENDING, name, 0, cli->infocb_data); /* split path and go there first */ if (OBEXFTP_USE_SPLIT_SETPATH(cli->quirks) && name && strchr(name, '/')) { char *basepath, *basename; split_file_path(name, &basepath, &basename); ret = obexftp_setpath(cli, basepath, 0); if(ret < 0) { cli->infocb(OBEXFTP_EV_ERR, basepath, 0, cli->infocb_data); return ret; } DEBUG(2, "%s() Deleting %s\n", __func__, basename); object = obexftp_build_del (cli->obexhandle, cli->connection_id, basename); free(basepath); free(basename); } else { DEBUG(2, "%s() Deleting %s\n", __func__, name); object = obexftp_build_del (cli->obexhandle, cli->connection_id, name); } if(object == NULL) return -1; cache_purge(&cli->cache, NULL); ret = cli_sync_request(cli, object); if(ret < 0) cli->infocb(OBEXFTP_EV_ERR, name, 0, cli->infocb_data); else cli->infocb(OBEXFTP_EV_OK, name, 0, cli->infocb_data); return ret; } /** Send OBEX SETPATH request (multiple requests if split path flag is set). \param cli an obexftp_client_t created by obexftp_open(). \param name path to change into \param create flag whether to create missing folders or fail \return the result of the OBEX SETPATH request(s). \note handles NULL, "", "/" and everything else correctly. */ int obexftp_setpath(obexftp_client_t *cli, const char *name, int create) { obex_object_t *object; int ret = 0; char *copy, *tail, *p; return_val_if_fail(cli != NULL, -EINVAL); DEBUG(2, "%s() Changing to %s\n", __func__, name); if (OBEXFTP_USE_SPLIT_SETPATH(cli->quirks) && name && *name && strchr(name, '/')) { tail = copy = strdup(name); for (p = strchr(tail, '/'); tail; ) { if (p) { *p = '\0'; p++; } cli->infocb(OBEXFTP_EV_SENDING, tail, 0, cli->infocb_data); DEBUG(2, "%s() Setpath \"%s\" (create:%d)\n", __func__, tail, create); /* try without the create flag */ object = obexftp_build_setpath (cli->obexhandle, cli->connection_id, tail, 0); ret = cli_sync_request(cli, object); if ((ret < 0) && create) { /* try again with create flag set maybe? */ object = obexftp_build_setpath (cli->obexhandle, cli->connection_id, tail, 1); ret = cli_sync_request(cli, object); } if (ret < 0) break; tail = p; if (p) p = strchr(p, '/'); /* prevent a trailing slash from messing all up with a cd top */ if (tail && *tail == '\0') break; } free (copy); } else { cli->infocb(OBEXFTP_EV_SENDING, name, 0, cli->infocb_data); DEBUG(2, "%s() Setpath \"%s\"\n", __func__, name); object = obexftp_build_setpath (cli->obexhandle, cli->connection_id, name, create); ret = cli_sync_request(cli, object); } if (create) cache_purge(&cli->cache, NULL); /* no way to know where we started */ if(ret < 0) cli->infocb(OBEXFTP_EV_ERR, name, 0, cli->infocb_data); else cli->infocb(OBEXFTP_EV_OK, name, 0, cli->infocb_data); return ret; } /** Send an OBEX PUT, optionally with (some) SETPATHs for a local file. \param cli an obexftp_client_t created by obexftp_open(). \param filename local file to send \param remotename remote name to write \return the result of the OBEX PUT (and SETPATH) request(s). \note Puts to filename's basename if remotename is NULL or ends with a slash. */ int obexftp_put_file(obexftp_client_t *cli, const char *filename, const char *remotename) { obex_object_t *object; int ret; return_val_if_fail(cli != NULL, -EINVAL); return_val_if_fail(filename != NULL, -EINVAL); if (cli->out_data) { DEBUG(1, "%s: Warning: buffer still active?\n", __func__); } cli->infocb(OBEXFTP_EV_SENDING, filename, 0, cli->infocb_data); // TODO: if remotename ends with a slash: add basename if (!remotename) { remotename = strrchr(filename, '/'); if (remotename) remotename++; else remotename = filename; } if (OBEXFTP_USE_SPLIT_SETPATH(cli->quirks) && remotename && strchr(remotename, '/')) { char *basepath, *basename; split_file_path(remotename, &basepath, &basename); ret = obexftp_setpath(cli, basepath, 0); if(ret < 0) { cli->infocb(OBEXFTP_EV_ERR, basepath, 0, cli->infocb_data); return ret; } DEBUG(2, "%s() Sending %s -> %s\n", __func__, filename, basename); object = build_object_from_file (cli->obexhandle, cli->connection_id, filename, basename); free(basepath); free(basename); } else { DEBUG(2, "%s() Sending %s -> %s\n", __func__, filename, remotename); object = build_object_from_file (cli->obexhandle, cli->connection_id, filename, remotename); } cli->fd = open(filename, O_RDONLY | O_BINARY, 0); if(cli->fd < 0) ret = -1; else { cli->out_data = NULL; /* dont free, isnt ours */ cache_purge(&cli->cache, NULL); ret = cli_sync_request(cli, object); } /* close(cli->fd); */ if(ret < 0) cli->infocb(OBEXFTP_EV_ERR, filename, 0, cli->infocb_data); else cli->infocb(OBEXFTP_EV_OK, filename, 0, cli->infocb_data); return ret; } /** Send memory data by OBEX PUT, optionally with (some) SETPATHs. \param cli an obexftp_client_t created by obexftp_open(). \param data data to send \param size length of the data \param remotename remote name to write \return the result of the OBEX PUT (and SETPATH) request(s). \note A remotename must be given always. */ int obexftp_put_data(obexftp_client_t *cli, const char *data, int size, const char *remotename) { obex_object_t *object; int ret; return_val_if_fail(cli != NULL, -EINVAL); return_val_if_fail(remotename != NULL, -EINVAL); if (cli->out_data) { DEBUG(1, "%s: Warning: buffer still active?\n", __func__); } cli->infocb(OBEXFTP_EV_SENDING, remotename, 0, cli->infocb_data); if (OBEXFTP_USE_SPLIT_SETPATH(cli->quirks) && remotename && strchr(remotename, '/')) { char *basepath, *basename; split_file_path(remotename, &basepath, &basename); ret = obexftp_setpath(cli, basepath, 0); if(ret < 0) { cli->infocb(OBEXFTP_EV_ERR, basepath, 0, cli->infocb_data); return ret; } DEBUG(2, "%s() Sending memdata -> %s\n", __func__, basename); object = obexftp_build_put (cli->obexhandle, cli->connection_id, basename, size); free(basepath); free(basename); } else { DEBUG(2, "%s() Sending memdata -> %s\n", __func__, remotename); object = obexftp_build_put (cli->obexhandle, cli->connection_id, remotename, size); } cli->out_data = data; /* memcpy would be safer */ cli->out_size = size; cli->out_pos = 0; cli->fd = -1; cache_purge(&cli->cache, NULL); ret = cli_sync_request(cli, object); if(ret < 0) cli->infocb(OBEXFTP_EV_ERR, remotename, 0, cli->infocb_data); else cli->infocb(OBEXFTP_EV_OK, remotename, 0, cli->infocb_data); return ret; } /** Simple device discovery wrappers. USB and BT only. */ static char **discover_usb() { char **res = NULL; #ifdef HAVE_USB obex_t *handle; obex_interface_t* obex_intf; int i, interfaces_number; if(! (handle = OBEX_Init(OBEX_TRANS_USB, cli_obex_event, 0))) { DEBUG(1, "%s() OBEX_Init failed\n", __func__); return NULL; } interfaces_number = OBEX_FindInterfaces(handle, &obex_intf); res = calloc(interfaces_number + 1, sizeof(char *)); for (i=0; i < interfaces_number; i++) { res[i] = malloc(201); snprintf(res[i], 200, "%d (Manufacturer: %s Product: %s Serial: %s Interface description: %s)", i, obex_intf[i].usb.manufacturer, obex_intf[i].usb.product, obex_intf[i].usb.serial, obex_intf[i].usb.control_interface); } /* OBEX_FreeInterfaces(handle); OpenOBEX 1.2 will crash */ OBEX_Cleanup(handle); #endif /* HAVE_USB */ return res; } char **obexftp_discover_bt_src(const char *src) { #ifdef HAVE_BLUETOOTH return btkit_discover(src); #else return NULL; #endif /* HAVE_BLUETOOTH */ } char *obexftp_bt_name_src(const char *addr, const char *src) { #ifdef HAVE_BLUETOOTH return btkit_getname(src, addr); #else return NULL; #endif /* HAVE_BLUETOOTH */ } int obexftp_browse_bt_src(const char *src, const char *addr, int svclass) { #ifdef HAVE_BLUETOOTH return btkit_browse(src, addr, svclass); #else return 0; #endif /* HAVE_BLUETOOTH */ } int obexftp_sdp_register(int svclass, int channel) { #ifdef HAVE_BLUETOOTH return btkit_register_obex(svclass, channel); #else return 0; #endif /* HAVE_BLUETOOTH */ } int obexftp_sdp_unregister(int svclass) { #ifdef HAVE_BLUETOOTH return btkit_unregister_service(svclass); #else return 0; #endif /* HAVE_BLUETOOTH */ } /** Device discovery wrapper for a named transport. \param transport a transport from the OBEX_TRANS_x enum. \return the discovery results as array of strings. \note USB and BT only for now. */ char **obexftp_discover(int transport) { switch (transport) { case OBEX_TRANS_BLUETOOTH: return obexftp_discover_bt(); case OBEX_TRANS_USB: return discover_usb(); default: DEBUG(1, "%s() Discovery not implemented: %d\n", __func__, transport); return NULL; } } obexftp-0.23/obexftp/object.h0000644000076600000240000000425711146600644013125 00000000000000/** \file obexftp/object.h Collection of functions to build common OBEX request objects. ObexFTP library - language bindings for OBEX file transfer. Copyright (c) 2002 Christian W. Zuckschwerdt ObexFTP is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with ObexFTP. If not, see . */ #ifndef OBEXFTP_OBJECT_H #define OBEXFTP_OBJECT_H #include #include #ifdef __cplusplus extern "C" { #endif /** Telecom/IrMC Synchronization Service: Name Prefix. */ #define IRMC_NAME_PREFIX "telecom/" /** Telecom/IrMC Synchronization Service: Object Profile file-type. */ #define XOBEX_PROFILE "x-obex/object-profile" /** Telecom/IrMC Synchronization Service: Capability file-type. */ #define XOBEX_CAPABILITY "x-obex/capability" /** Folder Browsing Service: Folder Listing file-type. */ #define XOBEX_LISTING "x-obex/folder-listing" /** Siemens specific: app. param. for memory info. * parameter 0x01: mem installed, 0x02: free mem */ #define APPARAM_INFO_CODE '2' /*@null@*/ obex_object_t *obexftp_build_info (obex_t obex, uint32_t conn, uint8_t opcode); /*@null@*/ obex_object_t *obexftp_build_get (obex_t obex, uint32_t conn, const char *name, const char *type); /*@null@*/ obex_object_t *obexftp_build_rename (obex_t obex, uint32_t conn, const char *from, const char *to); /*@null@*/ obex_object_t *obexftp_build_del (obex_t obex, uint32_t conn, const char *name); /*@null@*/ obex_object_t *obexftp_build_setpath (obex_t obex, uint32_t conn, const char *name, int create); /*@null@*/ obex_object_t *obexftp_build_put (obex_t obex, uint32_t conn, const char *name, int size); #ifdef __cplusplus } #endif #endif /* OBEXFTP_OBJECT_H */ obexftp-0.23/obexftp/Makefile.in0000644000076600000240000004274111146600665013556 00000000000000# Makefile.in generated by automake 1.9.6 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = .. am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = obexftp DIST_COMMON = $(obexftpinclude_HEADERS) $(srcdir)/Makefile.am \ $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/iconv.m4 \ $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/acinclude.m4 \ $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; am__installdirs = "$(DESTDIR)$(libdir)" \ "$(DESTDIR)$(obexftpincludedir)" libLTLIBRARIES_INSTALL = $(INSTALL) LTLIBRARIES = $(lib_LTLIBRARIES) libobexftp_la_DEPENDENCIES = ../multicobex/libmulticobex.la \ ../bfb/libbfb.la am_libobexftp_la_OBJECTS = object.lo client.lo obexftp_io.lo cache.lo \ unicode.lo bt_kit.lo libobexftp_la_OBJECTS = $(am_libobexftp_la_OBJECTS) DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) depcomp = $(SHELL) $(top_srcdir)/depcomp am__depfiles_maybe = depfiles COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ $(AM_LDFLAGS) $(LDFLAGS) -o $@ SOURCES = $(libobexftp_la_SOURCES) DIST_SOURCES = $(libobexftp_la_SOURCES) obexftpincludeHEADERS_INSTALL = $(INSTALL_HEADER) HEADERS = $(obexftpinclude_HEADERS) ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ BFB_VERSION = @BFB_VERSION@ BLUETOOTH_CFLAGS = @BLUETOOTH_CFLAGS@ BLUETOOTH_LIBS = @BLUETOOTH_LIBS@ BUILD_DOCS_FALSE = @BUILD_DOCS_FALSE@ BUILD_DOCS_TRUE = @BUILD_DOCS_TRUE@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DSYMUTIL = @DSYMUTIL@ ECHO = @ECHO@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ ENABLE_PERL_FALSE = @ENABLE_PERL_FALSE@ ENABLE_PERL_TRUE = @ENABLE_PERL_TRUE@ ENABLE_PYTHON_FALSE = @ENABLE_PYTHON_FALSE@ ENABLE_PYTHON_TRUE = @ENABLE_PYTHON_TRUE@ ENABLE_RUBY_FALSE = @ENABLE_RUBY_FALSE@ ENABLE_RUBY_TRUE = @ENABLE_RUBY_TRUE@ ENABLE_SWIG_FALSE = @ENABLE_SWIG_FALSE@ ENABLE_SWIG_TRUE = @ENABLE_SWIG_TRUE@ ENABLE_TCL_FALSE = @ENABLE_TCL_FALSE@ ENABLE_TCL_TRUE = @ENABLE_TCL_TRUE@ EXEEXT = @EXEEXT@ EXTRA_LIBS = @EXTRA_LIBS@ F77 = @F77@ FFLAGS = @FFLAGS@ GREP = @GREP@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LDFLAGS = @LDFLAGS@ LIBICONV = @LIBICONV@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LN_S = @LN_S@ LTLIBICONV = @LTLIBICONV@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MULTICOBEX_VERSION = @MULTICOBEX_VERSION@ NMEDIT = @NMEDIT@ OBEXFTP_VERSION = @OBEXFTP_VERSION@ OBJEXT = @OBJEXT@ OPENOBEX_CFLAGS = @OPENOBEX_CFLAGS@ OPENOBEX_LIBS = @OPENOBEX_LIBS@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ PKG_CONFIG = @PKG_CONFIG@ PYTHON = @PYTHON@ PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@ PYTHON_PLATFORM = @PYTHON_PLATFORM@ PYTHON_PREFIX = @PYTHON_PREFIX@ PYTHON_VERSION = @PYTHON_VERSION@ RANLIB = @RANLIB@ REQUIRES = @REQUIRES@ RUBY = @RUBY@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ SWIG = @SWIG@ SWIG_LIB = @SWIG_LIB@ TCLSH = @TCLSH@ VERSION = @VERSION@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_F77 = @ac_ct_F77@ ac_perl_enabled = @ac_perl_enabled@ ac_python_enabled = @ac_python_enabled@ ac_ruby_enabled = @ac_ruby_enabled@ ac_tcl_enabled = @ac_tcl_enabled@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ pkgpyexecdir = @pkgpyexecdir@ pkgpythondir = @pkgpythondir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ pyexecdir = @pyexecdir@ pythondir = @pythondir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ lib_LTLIBRARIES = libobexftp.la AM_CFLAGS = @OPENOBEX_CFLAGS@ \ -I$(top_srcdir) \ -I$(top_srcdir)/includes obexftpincludedir = $(includedir)/obexftp libobexftp_la_SOURCES = object.c object.h \ client.c client.h \ obexftp_io.c obexftp_io.h \ cache.c cache.h \ uuid.h obexftp.h \ unicode.c unicode.h \ bt_kit.c bt_kit.h obexftpinclude_HEADERS = obexftp.h \ client.h \ uuid.h \ object.h libobexftp_la_LDFLAGS = -no-undefined \ -version-info $(OBEXFTP_VERSION) libobexftp_la_LIBADD = ../multicobex/libmulticobex.la \ ../bfb/libbfb.la \ @OPENOBEX_LIBS@ \ @BLUETOOTH_LIBS@ \ @LTLIBICONV@ \ @EXTRA_LIBS@ all: all-am .SUFFIXES: .SUFFIXES: .c .lo .o .obj $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu obexftp/Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --gnu obexftp/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh install-libLTLIBRARIES: $(lib_LTLIBRARIES) @$(NORMAL_INSTALL) test -z "$(libdir)" || $(mkdir_p) "$(DESTDIR)$(libdir)" @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ if test -f $$p; then \ f=$(am__strip_dir) \ echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \ $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \ else :; fi; \ done uninstall-libLTLIBRARIES: @$(NORMAL_UNINSTALL) @set -x; list='$(lib_LTLIBRARIES)'; for p in $$list; do \ p=$(am__strip_dir) \ echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \ $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \ done clean-libLTLIBRARIES: -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ test "$$dir" != "$$p" || dir=.; \ echo "rm -f \"$${dir}/so_locations\""; \ rm -f "$${dir}/so_locations"; \ done libobexftp.la: $(libobexftp_la_OBJECTS) $(libobexftp_la_DEPENDENCIES) $(LINK) -rpath $(libdir) $(libobexftp_la_LDFLAGS) $(libobexftp_la_OBJECTS) $(libobexftp_la_LIBADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/bt_kit.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cache.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/client.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/obexftp_io.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/object.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/unicode.Plo@am__quote@ .c.o: @am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ @am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c $< .c.obj: @am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ @am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` .c.lo: @am__fastdepCC_TRUE@ if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ @am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool uninstall-info-am: install-obexftpincludeHEADERS: $(obexftpinclude_HEADERS) @$(NORMAL_INSTALL) test -z "$(obexftpincludedir)" || $(mkdir_p) "$(DESTDIR)$(obexftpincludedir)" @list='$(obexftpinclude_HEADERS)'; for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ f=$(am__strip_dir) \ echo " $(obexftpincludeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(obexftpincludedir)/$$f'"; \ $(obexftpincludeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(obexftpincludedir)/$$f"; \ done uninstall-obexftpincludeHEADERS: @$(NORMAL_UNINSTALL) @list='$(obexftpinclude_HEADERS)'; for p in $$list; do \ f=$(am__strip_dir) \ echo " rm -f '$(DESTDIR)$(obexftpincludedir)/$$f'"; \ rm -f "$(DESTDIR)$(obexftpincludedir)/$$f"; \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ mkid -fID $$unique tags: TAGS TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique; \ fi ctags: CTAGS CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(CTAGS_ARGS)$$tags$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ list='$(DISTFILES)'; for file in $$list; do \ case $$file in \ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ esac; \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ dir="/$$dir"; \ $(mkdir_p) "$(distdir)$$dir"; \ else \ dir=''; \ fi; \ if test -d $$d/$$file; then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(LTLIBRARIES) $(HEADERS) installdirs: for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(obexftpincludedir)"; do \ test -z "$$dir" || $(mkdir_p) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \ mostlyclean-am distclean: distclean-am -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-libtool distclean-tags dvi: dvi-am dvi-am: html: html-am info: info-am info-am: install-data-am: install-obexftpincludeHEADERS install-exec-am: install-libLTLIBRARIES install-info: install-info-am install-man: installcheck-am: maintainer-clean: maintainer-clean-am -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-info-am uninstall-libLTLIBRARIES \ uninstall-obexftpincludeHEADERS .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ clean-libLTLIBRARIES clean-libtool ctags distclean \ distclean-compile distclean-generic distclean-libtool \ distclean-tags distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-exec \ install-exec-am install-info install-info-am \ install-libLTLIBRARIES install-man \ install-obexftpincludeHEADERS install-strip installcheck \ installcheck-am installdirs maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-compile \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags uninstall uninstall-am uninstall-info-am \ uninstall-libLTLIBRARIES uninstall-obexftpincludeHEADERS # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: obexftp-0.23/obexftp/cache.c0000644000076600000240000002516611146600644012717 00000000000000/** \file obexftp/cache.c ObexFTP client API caching layer. ObexFTP library - language bindings for OBEX file transfer. Copyright (c) 2002-2007 Christian W. Zuckschwerdt ObexFTP is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with ObexFTP. If not, see . */ #ifdef HAVE_CONFIG_H #include #endif #define _GNU_SOURCE #include #include #include #include #include /* __S_IFDIR, __S_IFREG */ #ifndef S_IFDIR #define S_IFDIR __S_IFDIR #endif #ifndef S_IFREG #define S_IFREG __S_IFREG #endif #include #include "obexftp.h" #include "client.h" #include "object.h" #include "unicode.h" #include "cache.h" #include /** Normalize the path argument, add/remove leading/trailing slash turns relative paths into (most likely wrong) absolute ones wont expand "../" or "./". */ static /*@only@*/ char *normalize_dir_path(int quirks, const char *name) { char *copy, *p; if (!name) name = ""; p = copy = malloc(strlen(name) + 2); /* at most add two slashes */ if (OBEXFTP_USE_LEADING_SLASH(quirks)) *p++ = '/'; while (*name == '/') name++; while (*name) { if (*name == '/') { *p++ = *name++; while (*name == '/') name++; } else { *p++ = *name++; } } if (p > copy && *(p-1) == '/') p--; if (OBEXFTP_USE_TRAILING_SLASH(quirks)) *p++ = '/'; *p = '\0'; return copy; } /** Purge all cache object at/below a given path. Methods that need to invalidate cache lines: - setpath (when create is on) - put - put_file - del - rename */ void cache_purge(cache_object_t **root, const char *path) { cache_object_t *cache, *tmp; char *name; char *pathonly; #define FREE_NODE(node) do { \ if (node->name) \ free(node->name); \ if (node->content) \ free(node->content); \ if (node->stats) \ free(node->stats); \ free(node); \ } while(0) if (!path || *path == '\0' || *path != '/') { /* purge all */ while (*root) { cache = *root; *root = cache->next; FREE_NODE(cache); } return; } pathonly = strdup(path); name = strrchr(pathonly, '/'); *name++ = '\0'; /* removing far too much, the siblings could stay cached... */ while (*root && !strncmp((*root)->name, pathonly, strlen(pathonly))) { cache = *root; *root = cache->next; FREE_NODE(cache); } for (cache = *root; cache->next; cache = cache->next) { if (!strncmp(cache->next->name, pathonly, strlen(pathonly))) { tmp = cache->next; cache->next = cache->next->next; FREE_NODE(tmp); } } free(pathonly); } /** Retrieve an object from the cache. */ int get_cache_object(const obexftp_client_t *cli, const char *name, char **object, int *size) { cache_object_t *cache; return_val_if_fail(cli != NULL, -1); /* search the cache */ for (cache = cli->cache; cache && strcmp(cache->name, name); cache = cache->next); if (cache) { DEBUG(2, "%s() Listing %s from cache\n", __func__, cache->name); if (object) *object = cache->content; if (size) *size = cache->size; return 0; } return -1; } /** Store an object in the cache. */ int put_cache_object(obexftp_client_t *cli, /*@only@*/ char *name, /*@only@*/ char *object, int size) { cache_object_t *cache; return_val_if_fail(cli != NULL, -1); /* prepend to cache */ cache = cli->cache; cli->cache = calloc(1, sizeof(cache_object_t)); cli->cache->next = cache; cli->cache->timestamp = time(NULL); cli->cache->size = size; cli->cache->name = name; cli->cache->content = object; return 0; } /** List a directory from cache, optionally loading it first. */ static char *obexftp_cache_list(obexftp_client_t *cli, const char *name) { char *path, *listing; return_val_if_fail(cli != NULL, NULL); cli->infocb(OBEXFTP_EV_RECEIVING, name, 0, cli->infocb_data); path = normalize_dir_path(cli->quirks, name); DEBUG(2, "%s() Listing %s (%s)\n", __func__, name, path); /* search the cache */ if (!get_cache_object(cli, path, &listing, NULL)) { DEBUG(2, "%s() Listing %s from cache\n", __func__, path); if (path) free(path); return listing; } if (path && !strcmp(path, "/telecom/")) { listing = strdup(""); put_cache_object(cli, path, listing, strlen(listing)); } if (obexftp_list(cli, NULL, path) < 0) return NULL; listing = strdup(cli->buf_data); put_cache_object(cli, path, listing, strlen(listing)); return listing; } /* simple xml parser */ /** Parse fixed format date string to time_t. */ static time_t atotime (const char *date) { struct tm tm; if (6 == sscanf(date, "%4d%2d%2dT%2d%2d%2d", &tm.tm_year, &tm.tm_mon, &tm.tm_mday, &tm.tm_hour, &tm.tm_min, &tm.tm_sec)) { tm.tm_year -= 1900; tm.tm_mon--; } tm.tm_isdst = 0; return mktime(&tm); } /** Parse an XML file to array of stat_entry_t's. Very limited - not multi-byte character save. It's actually "const char *xml" but can't be declared as such. \return a new allocated array of stat_entry_t's. */ static stat_entry_t *parse_directory(char *xml) { const char *line; const char *p, *h; char tagname[201]; char name[201]; // bad coder char mod[201]; // - no biscuits! char size[201]; // int would be ok too. stat_entry_t *dir_start, *dir; int ret, n, i; char *xml_conv; if (!xml) return NULL; n = strlen(xml) + 1; xml_conv = malloc(n); ret = Utf8ToChar(xml_conv, xml, n); if (ret > 0) { xml = xml_conv; } else { DEBUG(1, "UTF-8 conversion error\n"); } DEBUG(4, "Converted cache xml: '%s'\n", xml); /* prepare a cache to hold this dir */ p = xml; for (i = 0; p && *p; p = strchr(++p, '>')) i++; DEBUG(2, "max %d cache lines\n", i); dir_start = dir = calloc(i, sizeof(stat_entry_t)); for (line = xml; *line != '\0'; ) { p = line; line = strchr(line, '>'); if (!line) break; line++; while (*p != '<') p++; tagname[0] = '\0'; sscanf (p, "<%200[^> \t\n\r] ", tagname); name[0] = '\0'; h = strstr(p, "name="); if (h) sscanf (h, "name=\"%200[^\"]\"", name); mod[0] = '\0'; h = strstr(p, "modified="); if (h) sscanf (h, "modified=\"%200[^\"]\"", mod); size[0] = '\0'; h = strstr(p, "size="); if (h) sscanf (h, "size=\"%200[^\"]\"", size); if (!strcmp("folder", tagname)) { dir->mode = S_IFDIR | 0755; strcpy(dir->name, name); dir->mtime = atotime(mod); dir->size = 0; dir++; } if (!strcmp("file", tagname)) { dir->mode = S_IFREG | 0644; strcpy(dir->name, name); dir->mtime = atotime(mod); i = 0; sscanf(size, "%i", &i); dir->size = i; /* int to off_t */ dir++; } // handle hidden folder! } dir->name[0] = '\0'; if (xml_conv) free (xml_conv); return dir_start; } /* directory handling */ typedef struct { stat_entry_t *cur; /* stat_entry_t *head; -- so we can free this? */ } dir_stream_t; /** Prepare a directory for reading. */ void *obexftp_opendir(obexftp_client_t *cli, const char *name) { cache_object_t *cache; dir_stream_t *stream; char *abs; /* fetch dir if needed */ (void) obexftp_cache_list(cli, name); /* search the cache */ abs = normalize_dir_path(cli->quirks, name); for (cache = cli->cache; cache && strcmp(cache->name, abs); cache = cache->next); free(abs); if (!cache) return NULL; DEBUG(2, "%s() dir prepared (%s)\n", __func__, cache->name); /* read dir */ if (!cache->stats) cache->stats = parse_directory(cache->content); DEBUG(2, "%s() got stats\n", __func__); stream = malloc(sizeof(dir_stream_t)); stream->cur = cache->stats; return (void *)stream; } /** Close a directory after reading. The stat entry is a cache object so we do nothing. */ int obexftp_closedir(void *dir) { if (!dir) return -1; free (dir); return 0; } /** Read the next entry from an open directory. */ stat_entry_t *obexftp_readdir(void *dir) { dir_stream_t *stream; stream = (dir_stream_t *)dir; if (!stream || !(stream->cur)) return NULL; if (!(*stream->cur->name)) return NULL; return stream->cur++; } /** Stat a directory entry. */ stat_entry_t *obexftp_stat(obexftp_client_t *cli, const char *name) { cache_object_t *cache; stat_entry_t *entry; char *path, *abs, *p; const char *basename; return_val_if_fail(name != NULL, NULL); path = strdup(name); p = strrchr(path, '/'); if (p) { *p++ = '\0'; basename = p; } else { *path = '\0'; basename = name; } DEBUG(2, "%s() stating '%s' / '%s'\n", __func__, path, basename); /* fetch dir if needed */ (void) obexftp_cache_list(cli, path); /* search the cache for the path */ abs = normalize_dir_path(cli->quirks, path); for (cache = cli->cache; cache && strcmp(cache->name, abs); cache = cache->next); free(abs); if (!cache) { free(path); return NULL; } DEBUG(2, "%s() found '%s'\n", __func__, cache->name); /* read dir */ if (!cache->stats) cache->stats = parse_directory(cache->content); DEBUG(2, "%s() got dir '%s'\n", __func__, path); /* then lookup the basename */ for (entry = cache->stats; entry && *entry->name && strcmp(entry->name, basename); entry++); free(path); if (!entry || !(*entry->name)) return NULL; DEBUG(2, "%s() got stats\n", __func__); return entry; /* dev_t st_dev; / * device * / ino_t st_ino; / * inode * / mode_t st_mode; / * protection * / nlink_t st_nlink; / * number of hard links * / uid_t st_uid; / * user ID of owner * / gid_t st_gid; / * group ID of owner * / dev_t st_rdev; / * device type (if inode device) * / off_t st_size; / * total size, in bytes * / blksize_t st_blksize; / * blocksize for filesystem I/O * / blkcnt_t st_blocks; / * number of blocks allocated * / time_t st_atime; / * time of last access * / time_t st_mtime; / * time of last modification * / time_t st_ctime; / * time of last status change * / */ } obexftp-0.23/obexftp/cache.h0000644000076600000240000000236611146600644012721 00000000000000/** \file obexftp/cache.h ObexFTP client API caching layer. ObexFTP library - language bindings for OBEX file transfer. Copyright (c) 2002-2007 Christian W. Zuckschwerdt ObexFTP is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with ObexFTP. If not, see . */ #ifndef OBEXFTP_CACHE_H #define OBEXFTP_CACHE_H #ifdef __cplusplus extern "C" { #endif void cache_purge(cache_object_t **root, const char *path); void xfer_purge(obexftp_client_t *cli); int put_cache_object(obexftp_client_t *cli, /*@only@*/ char *name, /*@only@*/ char *object, int size); int get_cache_object(const obexftp_client_t *cli, const char *name, char **object, int *size); #ifdef __cplusplus } #endif #endif /* OBEXFTP_CACHE_H */ obexftp-0.23/obexftp/Makefile.am0000644000076600000240000000124711146600644013536 00000000000000lib_LTLIBRARIES = libobexftp.la AM_CFLAGS = @OPENOBEX_CFLAGS@ \ -I$(top_srcdir) \ -I$(top_srcdir)/includes obexftpincludedir = $(includedir)/obexftp libobexftp_la_SOURCES = object.c object.h \ client.c client.h \ obexftp_io.c obexftp_io.h \ cache.c cache.h \ uuid.h obexftp.h \ unicode.c unicode.h \ bt_kit.c bt_kit.h obexftpinclude_HEADERS = obexftp.h \ client.h \ uuid.h \ object.h libobexftp_la_LDFLAGS = -no-undefined \ -version-info $(OBEXFTP_VERSION) libobexftp_la_LIBADD = ../multicobex/libmulticobex.la \ ../bfb/libbfb.la \ @OPENOBEX_LIBS@ \ @BLUETOOTH_LIBS@ \ @LTLIBICONV@ \ @EXTRA_LIBS@ obexftp-0.23/obexftp/unicode.h0000644000076600000240000000223311146600644013275 00000000000000/** \file obexftp/unicode.h Unicode charset and encoding conversions. ObexFTP library - language bindings for OBEX file transfer. Copyright (c) 2007 Christian W. Zuckschwerdt ObexFTP is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with ObexFTP. If not, see . */ #ifndef OBEXFTP_UNICODE_H #define OBEXFTP_UNICODE_H #include #ifdef __cplusplus extern "C" { #endif int CharToUnicode(uint8_t *uc, const uint8_t *c, int size); int UnicodeToChar(uint8_t *c, const uint8_t *uc, int size); int Utf8ToChar(uint8_t *c, const uint8_t *uc, int size); #ifdef __cplusplus } #endif #endif /* OBEXFTP_UNICODE_H */ obexftp-0.23/obexftp/obexftp_io.c0000644000076600000240000001424011146600644014001 00000000000000/** \file obexftp/obexftp_io.c ObexFTP IO abstraction implementation. ObexFTP library - language bindings for OBEX file transfer. Copyright (c) 2002 Christian W. Zuckschwerdt ObexFTP is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with ObexFTP. If not, see . */ #include #include #include #include #include #include #include #include #include #include #include "obexftp_io.h" #include #ifdef _WIN32 #define S_IRGRP 0 #define S_IROTH 0 #define S_IXGRP 0 #define S_IXOTH 0 #endif #define DEFFILEMOD (S_IRUSR|S_IWUSR|S_IRGRP|S_IROTH) /* 0644 */ #define DEFXFILEMOD (DEFFILEMOD | S_IXGRP | S_IXUSR | S_IXOTH) /* 0755 */ /* Get some file-info. (size and lastmod) */ /* lastmod needs to have at least 21 bytes */ static int get_fileinfo(const char *name, char *lastmod) { struct stat stats; struct tm *tm; if ((0 == stat(name, &stats)) && ((tm = gmtime(&stats.st_mtime)) != NULL)) { (void) snprintf(lastmod, 21, "%04d-%02d-%02dT%02d:%02d:%02dZ", tm->tm_year+1900, tm->tm_mon+1, tm->tm_mday, tm->tm_hour, tm->tm_min, tm->tm_sec); return (int) stats.st_size; } return -1; } /* Create an object from a file. Attach some info-headers to it */ obex_object_t *build_object_from_file(obex_t *obex, uint32_t conn, const char *localname, const char *remotename) { obex_object_t *object; obex_headerdata_t hv; uint8_t *ucname; int ucname_len, size; char lastmod[] = "11997700--0011--0011TT0000::0000::0000ZZ."; /* Get filesize and modification-time */ size = get_fileinfo(localname, lastmod); object = OBEX_ObjectNew(obex, OBEX_CMD_PUT); if(object == NULL) return NULL; if(conn != 0xffffffff) { hv.bq4 = conn; (void) OBEX_ObjectAddHeader(obex, object, OBEX_HDR_CONNECTION, hv, sizeof(uint32_t), OBEX_FL_FIT_ONE_PACKET); } ucname_len = strlen(remotename)*2 + 2; ucname = malloc(ucname_len); if(ucname == NULL) { (void) OBEX_ObjectDelete(obex, object); return NULL; } ucname_len = OBEX_CharToUnicode(ucname, (uint8_t*)remotename, ucname_len); hv.bs = ucname; (void ) OBEX_ObjectAddHeader(obex, object, OBEX_HDR_NAME, hv, ucname_len, 0); free(ucname); hv.bq4 = (const uint32_t) size; (void) OBEX_ObjectAddHeader(obex, object, OBEX_HDR_LENGTH, hv, sizeof(uint32_t), 0); #if 0 /* Win2k excpects this header to be in unicode. I suspect this in incorrect so this will have to wait until that's investigated */ hv.bs = (const uint8_t *) lastmod; OBEX_ObjectAddHeader(obex, object, OBEX_HDR_TIME, hv, strlen(lastmod)+1, 0); #endif hv.bs = (const uint8_t *) NULL; (void) OBEX_ObjectAddHeader(obex, object, OBEX_HDR_BODY, hv, 0, OBEX_FL_STREAM_START); DEBUG(3, "%s() Lastmod = %s\n", __func__, lastmod); return object; } /* Check for dangerous filenames. */ static int nameok(const char *name) { DEBUG(3, "%s() \n", __func__); return_val_if_fail (name != NULL, FALSE); /* No abs paths */ if(name[0] == '/') return FALSE; if(strlen(name) >= 3) { /* "../../vmlinuz" */ if(name[0] == '.' && name[1] == '.' && name[2] == '/') return FALSE; /* "dir/../../../vmlinuz" */ if(strstr(name, "/../") != NULL) return FALSE; } return TRUE; } /* Concatenate two pathnames. */ /* The first path may be NULL. */ /* The second path is always treated relative. */ static int pathncat(/*@unique@*/ char *dest, const char *path, const char *name, size_t n) { size_t len; if(name == NULL) return -EINVAL; while(*name == '/') name++; if((path == NULL) || (*path == '\0')) { strncpy(dest, name, n); dest[n - 1] = '\0'; } else { strncpy(dest, path, n); dest[n - 1] = '\0'; len = strlen(dest); if (len >= n - 1) return -ENOMEM; if (dest[len - 1] != '/') { dest[len] = '/'; dest[len + 1] = '\0'; } strncat(dest, name, n - strlen(dest) - 1); } return 0; } /* Open a file, but do some sanity-checking first. */ int open_safe(const char *path, const char *name) { char *diskname; size_t maxlen; int fd; DEBUG(3, "%s() \n", __func__); /* Check for dangerous filenames */ if(nameok(name) == FALSE) return -1; /* TODO! Rename file if already exist. */ maxlen = strlen(name) + 1; if (path) maxlen += strlen(path); diskname = malloc(maxlen); if(!diskname) return -1; (void) pathncat(diskname, path, name, maxlen); DEBUG(3, "%s() Creating file %s\n", __func__, diskname); fd = open(diskname, O_RDWR | O_CREAT | O_TRUNC, DEFFILEMOD); free(diskname); return fd; } /* Go to a directory. Create if not exists and create is true. */ int checkdir(const char *path, const char *dir, int create, int allowabs) { char *newpath; size_t maxlen; struct stat statbuf; int ret = -1; if(!allowabs) { if(nameok(dir) == FALSE) return -1; } if(!dir) return 1; maxlen = strlen(dir) + 1; if (path) maxlen += strlen(path); newpath = malloc(maxlen); if(!newpath) return -1; (void) pathncat(newpath, path, dir, maxlen); DEBUG(3, "%s() path = %s dir = %s, create = %d, allowabs = %d\n", __func__, path, dir, create, allowabs); if(stat(newpath, &statbuf) == 0) { /* If this directory aleady exist we are done */ if(S_ISDIR(statbuf.st_mode)) { DEBUG(3, "%s() Using existing dir\n", __func__); free(newpath); return 1; } else { /* A non-directory with this name already exist. */ DEBUG(3, "%s() A non-dir called %s already exist\n", __func__, newpath); free(newpath); return -1; } } if(create) { DEBUG(3, "%s() Will try to create %s\n", __func__, newpath); #ifdef _WIN32 ret = mkdir(newpath); #else ret = mkdir(newpath, DEFXFILEMOD); #endif } else { ret = -1; } free(newpath); return ret; } obexftp-0.23/obexftp/obexftp_io.h0000644000076600000240000000215611146600644014011 00000000000000/** \file obexftp/obexftp_io.h ObexFTP IO abstraction. ObexFTP library - language bindings for OBEX file transfer. Copyright (c) 2002 Christian W. Zuckschwerdt ObexFTP is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with ObexFTP. If not, see . */ #ifndef OBEXFTP_IO_H #define OBEXFTP_IO_H /*@null@*/ obex_object_t *build_object_from_file(obex_t *handle, uint32_t conn, const char *localname, const char *remotename); int open_safe(const char *path, const char *name); int checkdir(const char *path, const char *dir, int create, int allowabs); #endif /* OBEXFTP_IO_H */ obexftp-0.23/examples/0000777000076600000240000000000011146603263011731 500000000000000obexftp-0.23/examples/ruby_example.rb0000755000076600000240000000066511146600644014700 00000000000000#!/usr/bin/env ruby require 'obexftp' intfs = Obexftp.discover(Obexftp::USB) intfs.each { |i| puts i } # - or - obex = Obexftp::Client.new(Obexftp::BLUETOOTH) intfs = obex.discover intfs.each { |i| puts i } # - then - dev = intfs.first channel = Obexftp.browsebt(dev, 0) # default is ftp obex = Obexftp::Client.new(Obexftp::BLUETOOTH) # or reuse the above puts obex.connect(dev, channel) puts obex.list('/') puts obex.disconnect obexftp-0.23/examples/perl_example.pl0000755000076600000240000000144511146600644014666 00000000000000#!/usr/bin/perl -w use strict; use OBEXFTP; my $obex = new OBEXFTP::client($OBEXFTP::BLUETOOTH); my $devs = $obex->discover(); die "No devices found" unless @$devs > 0; print "Found " . scalar @$devs . " devices\n"; my $dev = $devs->[0]; # or $$devs[0] my $channel = OBEXFTP::browsebt($dev, 0); # default is ftp print "Using device $dev on channel $channel\n"; sleep 2; my $ret = $obex->connect($dev, $channel); print "$ret\n"; $ret = $obex->list("/"); print "$ret\n"; sleep 2; $ret = $obex->list("/images"); print "$ret\n"; sleep 2; $ret = $obex->get("/images/some.jpg"); open OUT, ">downloaded.jpg" or die "Can't write test.out: $@"; binmode(OUT); print OUT $ret; close OUT; $ret = $obex->get("/data/README.txt"); print "$ret\n"; $ret = $obex->disconnect(); print "$ret\n"; $obex->DESTROY(); obexftp-0.23/examples/ruby_list_devices.rb0000755000076600000240000000076511146600644015723 00000000000000#!/usr/bin/env ruby require 'obexftp' puts "Scanning USB..." intfs = Obexftp.discover(Obexftp::USB) intfs.each do |dev| puts "usb/#{dev}" end puts "Scanning BT..." intfs = Obexftp.discover(Obexftp::BLUETOOTH) intfs.each do |dev| channel = Obexftp.browsebt(dev, Obexftp::PUSH) puts "bt/[#{dev}]:#{channel} (push)" channel = Obexftp.browsebt(dev, Obexftp::FTP) puts "bt/[#{dev}]:#{channel} (ftp)" channel = Obexftp.browsebt(dev, Obexftp::SYNC) puts "bt/[#{dev}]:#{channel} (sync)" end obexftp-0.23/examples/c_example.c0000644000076600000240000000325011146600644013746 00000000000000/* Minimal ObexFTP C client example Copyright (c) 2007 Christian W. Zuckschwerdt Compile with: gcc -Wall $(pkg-config --libs obexftp) -o c_example c_example.c */ #include #include #include /*!!!*/ int main(int argc, char *argv[]) { char *device; int channel; char *filename = NULL; obexftp_client_t *cli = NULL; /*!!!*/ int ret; /* Get device, channel and optional filename */ if (argc < 3) { fprintf(stderr, "Usage: %s []\n", argv[0]); exit(1); } device = argv[1]; channel = atoi(argv[2]); if (argc > 3) { filename = argv[3]; } /* Open connection */ cli = obexftp_open(OBEX_TRANS_BLUETOOTH, NULL, NULL, NULL); /*!!!*/ if (cli == NULL) { fprintf(stderr, "Error opening obexftp client\n"); exit(1); } /* Connect to device */ ret = obexftp_connect(cli, device, channel); /*!!!*/ if (ret < 0) { fprintf(stderr, "Error connecting to obexftp device\n"); obexftp_close(cli); cli = NULL; exit(1); } if (filename == NULL) { /* List folder */ ret = obexftp_list(cli, NULL, "/"); /*!!!*/ if (ret < 0) { fprintf(stderr, "Error getting a folder listing\n"); } else { printf("%s\n", cli->buf_data); /*!!!*/ } } else { /* Get file */ ret = obexftp_get(cli, NULL, filename); /*!!!*/ if (ret < 0) { fprintf(stderr, "Error getting a file\n"); } else { /* do something with cli->buf_data and cli->buf_size */ } } /* Disconnect */ ret = obexftp_disconnect(cli); /*!!!*/ if (ret < 0) { fprintf(stderr, "Error disconnecting the client\n"); } /* Close */ obexftp_close(cli); /*!!!*/ cli = NULL; exit(0); } obexftp-0.23/examples/Makefile.in0000644000076600000240000002402711146600665013722 00000000000000# Makefile.in generated by automake 1.9.6 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = .. am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = examples DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/iconv.m4 \ $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/acinclude.m4 \ $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = SOURCES = DIST_SOURCES = DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ BFB_VERSION = @BFB_VERSION@ BLUETOOTH_CFLAGS = @BLUETOOTH_CFLAGS@ BLUETOOTH_LIBS = @BLUETOOTH_LIBS@ BUILD_DOCS_FALSE = @BUILD_DOCS_FALSE@ BUILD_DOCS_TRUE = @BUILD_DOCS_TRUE@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DSYMUTIL = @DSYMUTIL@ ECHO = @ECHO@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ ENABLE_PERL_FALSE = @ENABLE_PERL_FALSE@ ENABLE_PERL_TRUE = @ENABLE_PERL_TRUE@ ENABLE_PYTHON_FALSE = @ENABLE_PYTHON_FALSE@ ENABLE_PYTHON_TRUE = @ENABLE_PYTHON_TRUE@ ENABLE_RUBY_FALSE = @ENABLE_RUBY_FALSE@ ENABLE_RUBY_TRUE = @ENABLE_RUBY_TRUE@ ENABLE_SWIG_FALSE = @ENABLE_SWIG_FALSE@ ENABLE_SWIG_TRUE = @ENABLE_SWIG_TRUE@ ENABLE_TCL_FALSE = @ENABLE_TCL_FALSE@ ENABLE_TCL_TRUE = @ENABLE_TCL_TRUE@ EXEEXT = @EXEEXT@ EXTRA_LIBS = @EXTRA_LIBS@ F77 = @F77@ FFLAGS = @FFLAGS@ GREP = @GREP@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LDFLAGS = @LDFLAGS@ LIBICONV = @LIBICONV@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LN_S = @LN_S@ LTLIBICONV = @LTLIBICONV@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MULTICOBEX_VERSION = @MULTICOBEX_VERSION@ NMEDIT = @NMEDIT@ OBEXFTP_VERSION = @OBEXFTP_VERSION@ OBJEXT = @OBJEXT@ OPENOBEX_CFLAGS = @OPENOBEX_CFLAGS@ OPENOBEX_LIBS = @OPENOBEX_LIBS@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ PKG_CONFIG = @PKG_CONFIG@ PYTHON = @PYTHON@ PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@ PYTHON_PLATFORM = @PYTHON_PLATFORM@ PYTHON_PREFIX = @PYTHON_PREFIX@ PYTHON_VERSION = @PYTHON_VERSION@ RANLIB = @RANLIB@ REQUIRES = @REQUIRES@ RUBY = @RUBY@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ SWIG = @SWIG@ SWIG_LIB = @SWIG_LIB@ TCLSH = @TCLSH@ VERSION = @VERSION@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_F77 = @ac_ct_F77@ ac_perl_enabled = @ac_perl_enabled@ ac_python_enabled = @ac_python_enabled@ ac_ruby_enabled = @ac_ruby_enabled@ ac_tcl_enabled = @ac_tcl_enabled@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ pkgpyexecdir = @pkgpyexecdir@ pkgpythondir = @pkgpythondir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ pyexecdir = @pyexecdir@ pythondir = @pythondir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ EXTRA_DIST = perl_example.pl \ python_example.py \ ruby_example.rb \ tcl_example.tcl \ c_example.c \ c_example_obex_push.c \ ruby_list_devices.rb \ ruby_obex_push.rb all: all-am .SUFFIXES: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu examples/Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --gnu examples/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool uninstall-info-am: tags: TAGS TAGS: ctags: CTAGS CTAGS: distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ list='$(DISTFILES)'; for file in $$list; do \ case $$file in \ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ esac; \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ dir="/$$dir"; \ $(mkdir_p) "$(distdir)$$dir"; \ else \ dir=''; \ fi; \ if test -d $$d/$$file; then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile installdirs: install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic distclean-libtool dvi: dvi-am dvi-am: html: html-am info: info-am info-am: install-data-am: install-exec-am: install-info: install-info-am install-man: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-info-am .PHONY: all all-am check check-am clean clean-generic clean-libtool \ distclean distclean-generic distclean-libtool distdir dvi \ dvi-am html html-am info info-am install install-am \ install-data install-data-am install-exec install-exec-am \ install-info install-info-am install-man install-strip \ installcheck installcheck-am installdirs maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-generic \ mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \ uninstall-info-am ruby_obexftp.rb \ README_obexftpbackup \ obexftpbackup \ picture-mover # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: obexftp-0.23/examples/Makefile.am0000644000076600000240000000043411146600644013702 00000000000000EXTRA_DIST = perl_example.pl \ python_example.py \ ruby_example.rb \ tcl_example.tcl \ c_example.c \ c_example_obex_push.c \ ruby_list_devices.rb \ ruby_obex_push.rb ruby_obexftp.rb \ README_obexftpbackup \ obexftpbackup \ picture-mover obexftp-0.23/examples/tcl_example.tcl0000644000076600000240000000033011146600644014642 00000000000000#!/bin/sh # the next line restarts using tclsh \ exec tclsh "$0" "$@" load obexftp.so puts [discover $BLUETOOTH] client c $BLUETOOTH puts [c connect "00:11:22:33:44:55" 6] puts [c list "/"] c disconnect c -delete obexftp-0.23/examples/c_example_obex_push.c0000755000076600000240000000313211146600644016024 00000000000000/* OBEX PUSH ObexFTP C client example Copyright (c) 2007 Christian W. Zuckschwerdt Compile with: gcc -Wall $(pkg-config --libs obexftp) -o c_example_obex_push c_example_obex_push.c */ #include #include #include #include /*!!!*/ int main(int argc, char *argv[]) { char *device = NULL; int channel = -1; char *filepath, *filename; obexftp_client_t *cli = NULL; /*!!!*/ int ret; /* Get the filename, device and optional channel */ if (argc < 3) { fprintf(stderr, "Usage: %s []\n", argv[0]); exit(1); } filepath = argv[1]; device = argv[2]; if (argc > 3) channel = atoi(argv[3]); else channel = obexftp_browse_bt_push(device); /*!!!*/ /* Extract basename from file path */ filename = strrchr(filepath, '/'); if (!filename) filename = filepath; else filename++; /* Open connection */ cli = obexftp_open(OBEX_TRANS_BLUETOOTH, NULL, NULL, NULL); /*!!!*/ if (cli == NULL) { fprintf(stderr, "Error opening obexftp client\n"); exit(1); } /* Connect to device */ ret = obexftp_connect_push(cli, device, channel); /*!!!*/ if (ret < 0) { fprintf(stderr, "Error connecting to obexftp device\n"); obexftp_close(cli); cli = NULL; exit(1); } /* Push file */ ret = obexftp_put_file(cli, filepath, filename); /*!!!*/ if (ret < 0) { fprintf(stderr, "Error putting file\n"); } /* Disconnect */ ret = obexftp_disconnect(cli); /*!!!*/ if (ret < 0) { fprintf(stderr, "Error disconnecting the client\n"); } /* Close */ obexftp_close(cli); /*!!!*/ cli = NULL; exit(0); } obexftp-0.23/examples/ruby_obex_push.rb0000755000076600000240000000316311146600644015235 00000000000000#!/usr/bin/env ruby =begin ruby_obex_push.rb - Ruby/GTK2 example of ObexFTP push client. Copyright (c) 2007 Christian W. Zuckschwerdt Original Ruby/GTK2 examples Copyright Ruby-GNOME2 Project Team This program is licenced under the same licence as Ruby-GNOME2. =end require 'gtk2' require 'obexftp' dialog = Gtk::FileChooserDialog.new("Send file via bluetooth", nil, Gtk::FileChooser::ACTION_OPEN, "gnome-vfs", [Gtk::Stock::COPY, Gtk::Dialog::RESPONSE_ACCEPT], [Gtk::Stock::CLOSE, Gtk::Dialog::RESPONSE_CANCEL] ) label = Gtk::Label.new("Select target device:") combo = Gtk::ComboBox.new hbox = Gtk::HBox.new hbox.add(label).add(combo).show_all dialog.extra_widget = hbox dialog.signal_connect("response") do |widget, response| case response when Gtk::Dialog::RESPONSE_ACCEPT filename = dialog.filename dev = combo.active_text channel = Obexftp.browsebt(dev, Obexftp::PUSH) obex = Obexftp::Client.new(Obexftp::BLUETOOTH) puts obex.connectpush(dev, channel) puts obex.put_file(filename) puts obex.disconnect else dialog.destroy Gtk.main_quit end end # Should use gtk.timeout_add and/or Thread.new for the scanning... puts "Scanning USB..." intfs = Obexftp.discover(Obexftp::USB) # intfs.each { |i| combo.append_text(i) } # enable this with >=ObexFTP-0.23 puts "Scanning BT..." intfs = Obexftp.discover(Obexftp::BLUETOOTH) intfs.each { |i| combo.append_text(i) } combo.active = 0 dialog.show_all Gtk.main obexftp-0.23/examples/python_example.py0000755000076600000240000000065211146600644015261 00000000000000#!/usr/bin/python import obexftp obex = obexftp.client(obexftp.BLUETOOTH) devs = obex.discover(); print devs; dev = devs[0] print "Using %s" % dev channel = obexftp.browsebt(dev,0) print "Channel %d" % channel print obex.connect(dev, channel) print obex.list("/") print obex.list("/images") data = obex.get("/images/some.jpg") file = open('downloaded.jpg', 'wb') file.write(data) print obex.disconnect() obex.delete obexftp-0.23/configure0000755000076600000240000304551211146600662011750 00000000000000#! /bin/sh # Guess values for system-dependent variables and create Makefiles. # Generated by GNU Autoconf 2.61 for ObexFTP 0.23. # # Report bugs to . # # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, # 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. ## --------------------- ## ## M4sh Initialization. ## ## --------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac fi # PATH needs CR # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then echo "#! /bin/sh" >conf$$.sh echo "exit 0" >>conf$$.sh chmod +x conf$$.sh if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi rm -f conf$$.sh fi # Support unset when possible. if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then as_unset=unset else as_unset=false fi # IFS # We need space, tab and new line, in precisely that order. Quoting is # there to prevent editors from complaining about space-tab. # (If _AS_PATH_WALK were called with IFS unset, it would disable word # splitting by setting IFS to empty value.) as_nl=' ' IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. case $0 in *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done IFS=$as_save_IFS ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 { (exit 1); exit 1; } fi # Work around bugs in pre-3.0 UWIN ksh. for as_var in ENV MAIL MAILPATH do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. for as_var in \ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ LC_TELEPHONE LC_TIME do if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then eval $as_var=C; export $as_var else ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var fi done # Required to use basename. if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi # Name of the executable. as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` # CDPATH. $as_unset CDPATH if test "x$CONFIG_SHELL" = x; then if (eval ":") 2>/dev/null; then as_have_required=yes else as_have_required=no fi if test $as_have_required = yes && (eval ": (as_func_return () { (exit \$1) } as_func_success () { as_func_return 0 } as_func_failure () { as_func_return 1 } as_func_ret_success () { return 0 } as_func_ret_failure () { return 1 } exitcode=0 if as_func_success; then : else exitcode=1 echo as_func_success failed. fi if as_func_failure; then exitcode=1 echo as_func_failure succeeded. fi if as_func_ret_success; then : else exitcode=1 echo as_func_ret_success failed. fi if as_func_ret_failure; then exitcode=1 echo as_func_ret_failure succeeded. fi if ( set x; as_func_ret_success y && test x = \"\$1\" ); then : else exitcode=1 echo positional parameters were not saved. fi test \$exitcode = 0) || { (exit 1); exit 1; } ( as_lineno_1=\$LINENO as_lineno_2=\$LINENO test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } ") 2> /dev/null; then : else as_candidate_shells= as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. case $as_dir in /*) for as_base in sh bash ksh sh5; do as_candidate_shells="$as_candidate_shells $as_dir/$as_base" done;; esac done IFS=$as_save_IFS for as_shell in $as_candidate_shells $SHELL; do # Try only shells that exist, to save several forks. if { test -f "$as_shell" || test -f "$as_shell.exe"; } && { ("$as_shell") 2> /dev/null <<\_ASEOF if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac fi : _ASEOF }; then CONFIG_SHELL=$as_shell as_have_required=yes if { "$as_shell" 2> /dev/null <<\_ASEOF if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac fi : (as_func_return () { (exit $1) } as_func_success () { as_func_return 0 } as_func_failure () { as_func_return 1 } as_func_ret_success () { return 0 } as_func_ret_failure () { return 1 } exitcode=0 if as_func_success; then : else exitcode=1 echo as_func_success failed. fi if as_func_failure; then exitcode=1 echo as_func_failure succeeded. fi if as_func_ret_success; then : else exitcode=1 echo as_func_ret_success failed. fi if as_func_ret_failure; then exitcode=1 echo as_func_ret_failure succeeded. fi if ( set x; as_func_ret_success y && test x = "$1" ); then : else exitcode=1 echo positional parameters were not saved. fi test $exitcode = 0) || { (exit 1); exit 1; } ( as_lineno_1=$LINENO as_lineno_2=$LINENO test "x$as_lineno_1" != "x$as_lineno_2" && test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } _ASEOF }; then break fi fi done if test "x$CONFIG_SHELL" != x; then for as_var in BASH_ENV ENV do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var done export CONFIG_SHELL exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} fi if test $as_have_required = no; then echo This script requires a shell more modern than all the echo shells that I found on your system. Please install a echo modern shell, or manually run the script under such a echo shell if you do have one. { (exit 1); exit 1; } fi fi fi (eval "as_func_return () { (exit \$1) } as_func_success () { as_func_return 0 } as_func_failure () { as_func_return 1 } as_func_ret_success () { return 0 } as_func_ret_failure () { return 1 } exitcode=0 if as_func_success; then : else exitcode=1 echo as_func_success failed. fi if as_func_failure; then exitcode=1 echo as_func_failure succeeded. fi if as_func_ret_success; then : else exitcode=1 echo as_func_ret_success failed. fi if as_func_ret_failure; then exitcode=1 echo as_func_ret_failure succeeded. fi if ( set x; as_func_ret_success y && test x = \"\$1\" ); then : else exitcode=1 echo positional parameters were not saved. fi test \$exitcode = 0") || { echo No shell found that supports shell functions. echo Please tell autoconf@gnu.org about your system, echo including any error possibly output before this echo message } as_lineno_1=$LINENO as_lineno_2=$LINENO test "x$as_lineno_1" != "x$as_lineno_2" && test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { # Create $as_me.lineno as a copy of $as_myself, but with $LINENO # uniformly replaced by the line number. The first 'sed' inserts a # line-number line after each line using $LINENO; the second 'sed' # does the real work. The second script uses 'N' to pair each # line-number line with the line containing $LINENO, and appends # trailing '-' during substitution so that $LINENO is not a special # case at line end. # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the # scripts with optimization help from Paolo Bonzini. Blame Lee # E. McMahon (1931-1989) for sed's syntax. :-) sed -n ' p /[$]LINENO/= ' <$as_myself | sed ' s/[$]LINENO.*/&-/ t lineno b :lineno N :loop s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ t loop s/-\n.*// ' >$as_me.lineno && chmod +x "$as_me.lineno" || { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 { (exit 1); exit 1; }; } # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the # original and so on. Autoconf is especially sensitive to this). . "./$as_me.lineno" # Exit status is that of the last command. exit } if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then as_dirname=dirname else as_dirname=false fi ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in -n*) case `echo 'x\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. *) ECHO_C='\c';; esac;; *) ECHO_N='-n';; esac if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir mkdir conf$$.dir fi echo >conf$$.file if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. # In both cases, we have to default to `cp -p'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -p' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -p' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null if mkdir -p . 2>/dev/null; then as_mkdir_p=: else test -d ./-p && rmdir ./-p as_mkdir_p=false fi if test -x / >/dev/null 2>&1; then as_test_x='test -x' else if ls -dL / >/dev/null 2>&1; then as_ls_L_option=L else as_ls_L_option= fi as_test_x=' eval sh -c '\'' if test -d "$1"; then test -d "$1/."; else case $1 in -*)set "./$1";; esac; case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in ???[sx]*):;;*)false;;esac;fi '\'' sh ' fi as_executable_p=$as_test_x # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" # Check that we are running under the correct shell. SHELL=${CONFIG_SHELL-/bin/sh} case X$ECHO in X*--fallback-echo) # Remove one level of quotation (which was required for Make). ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','` ;; esac echo=${ECHO-echo} if test "X$1" = X--no-reexec; then # Discard the --no-reexec flag, and continue. shift elif test "X$1" = X--fallback-echo; then # Avoid inline document here, it may be left over : elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then # Yippee, $echo works! : else # Restart under the correct shell. exec $SHELL "$0" --no-reexec ${1+"$@"} fi if test "X$1" = X--fallback-echo; then # used as fallback echo shift cat </dev/null 2>&1 && unset CDPATH if test -z "$ECHO"; then if test "X${echo_test_string+set}" != Xset; then # find a string as large as possible, as long as the shell can cope with it for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... if (echo_test_string=`eval $cmd`) 2>/dev/null && echo_test_string=`eval $cmd` && (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null then break fi done fi if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then : else # The Solaris, AIX, and Digital Unix default echo programs unquote # backslashes. This makes it impossible to quote backslashes using # echo "$something" | sed 's/\\/\\\\/g' # # So, first we look for a working echo in the user's PATH. lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for dir in $PATH /usr/ucb; do IFS="$lt_save_ifs" if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then echo="$dir/echo" break fi done IFS="$lt_save_ifs" if test "X$echo" = Xecho; then # We didn't find a better echo, so look for alternatives. if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then # This shell has a builtin print -r that does the trick. echo='print -r' elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && test "X$CONFIG_SHELL" != X/bin/ksh; then # If we have ksh, try running configure again with it. ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} export ORIGINAL_CONFIG_SHELL CONFIG_SHELL=/bin/ksh export CONFIG_SHELL exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"} else # Try using printf. echo='printf %s\n' if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then # Cool, printf works : elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && test "X$echo_testing_string" = 'X\t' && echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL export CONFIG_SHELL SHELL="$CONFIG_SHELL" export SHELL echo="$CONFIG_SHELL $0 --fallback-echo" elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && test "X$echo_testing_string" = 'X\t' && echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then echo="$CONFIG_SHELL $0 --fallback-echo" else # maybe with a smaller string... prev=: for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null then break fi prev="$cmd" done if test "$prev" != 'sed 50q "$0"'; then echo_test_string=`eval $prev` export echo_test_string exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"} else # Oops. We lost completely, so just stick with echo. echo=echo fi fi fi fi fi fi # Copy echo and quote the copy suitably for passing to libtool from # the Makefile, instead of quoting the original, which is used later. ECHO=$echo if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo" fi tagnames=${tagnames+${tagnames},}CXX tagnames=${tagnames+${tagnames},}F77 exec 7<&0 &1 # Name of the host. # hostname on some systems (SVR3.2, Linux) returns a bogus exit status, # so uname gets run too. ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` # # Initializations. # ac_default_prefix=/usr/local ac_clean_files= ac_config_libobj_dir=. LIBOBJS= cross_compiling=no subdirs= MFLAGS= MAKEFLAGS= SHELL=${CONFIG_SHELL-/bin/sh} # Identity of this package. PACKAGE_NAME='ObexFTP' PACKAGE_TARNAME='obexftp' PACKAGE_VERSION='0.23' PACKAGE_STRING='ObexFTP 0.23' PACKAGE_BUGREPORT='zany@triq.net' # Factoring default headers for most tests. ac_includes_default="\ #include #ifdef HAVE_SYS_TYPES_H # include #endif #ifdef HAVE_SYS_STAT_H # include #endif #ifdef STDC_HEADERS # include # include #else # ifdef HAVE_STDLIB_H # include # endif #endif #ifdef HAVE_STRING_H # if !defined STDC_HEADERS && defined HAVE_MEMORY_H # include # endif # include #endif #ifdef HAVE_STRINGS_H # include #endif #ifdef HAVE_INTTYPES_H # include #endif #ifdef HAVE_STDINT_H # include #endif #ifdef HAVE_UNISTD_H # include #endif" ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datarootdir datadir sysconfdir sharedstatedir localstatedir includedir oldincludedir docdir infodir htmldir dvidir pdfdir psdir libdir localedir mandir DEFS ECHO_C ECHO_N ECHO_T LIBS build_alias host_alias target_alias INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE LN_S build build_cpu build_vendor build_os host host_cpu host_vendor host_os SED GREP EGREP ECHO AR RANLIB DSYMUTIL NMEDIT CPP CXX CXXFLAGS ac_ct_CXX CXXDEPMODE am__fastdepCXX_TRUE am__fastdepCXX_FALSE CXXCPP F77 FFLAGS ac_ct_F77 LIBTOOL EXTRA_LIBS PKG_CONFIG OPENOBEX_CFLAGS OPENOBEX_LIBS LIBICONV LTLIBICONV BLUETOOTH_CFLAGS BLUETOOTH_LIBS ENABLE_SWIG_TRUE ENABLE_SWIG_FALSE SWIG SWIG_LIB ac_perl_enabled PERL ENABLE_PERL_TRUE ENABLE_PERL_FALSE ac_python_enabled PYTHON PYTHON_VERSION PYTHON_PREFIX PYTHON_EXEC_PREFIX PYTHON_PLATFORM pythondir pkgpythondir pyexecdir pkgpyexecdir ENABLE_PYTHON_TRUE ENABLE_PYTHON_FALSE ac_ruby_enabled RUBY ENABLE_RUBY_TRUE ENABLE_RUBY_FALSE ac_tcl_enabled TCLSH ENABLE_TCL_TRUE ENABLE_TCL_FALSE BUILD_DOCS_TRUE BUILD_DOCS_FALSE OBEXFTP_VERSION MULTICOBEX_VERSION BFB_VERSION REQUIRES LIBOBJS LTLIBOBJS' ac_subst_files='' ac_precious_vars='build_alias host_alias target_alias CC CFLAGS LDFLAGS LIBS CPPFLAGS CPP CXX CXXFLAGS CCC CXXCPP F77 FFLAGS PKG_CONFIG OPENOBEX_CFLAGS OPENOBEX_LIBS BLUETOOTH_CFLAGS BLUETOOTH_LIBS' # Initialize some variables set by options. ac_init_help= ac_init_version=false # The variables have the same names as the options, with # dashes changed to underlines. cache_file=/dev/null exec_prefix=NONE no_create= no_recursion= prefix=NONE program_prefix=NONE program_suffix=NONE program_transform_name=s,x,x, silent= site= srcdir= verbose= x_includes=NONE x_libraries=NONE # Installation directory options. # These are left unexpanded so users can "make install exec_prefix=/foo" # and all the variables that are supposed to be based on exec_prefix # by default will actually change. # Use braces instead of parens because sh, perl, etc. also accept them. # (The list follows the same order as the GNU Coding Standards.) bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' datarootdir='${prefix}/share' datadir='${datarootdir}' sysconfdir='${prefix}/etc' sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' includedir='${prefix}/include' oldincludedir='/usr/include' docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' infodir='${datarootdir}/info' htmldir='${docdir}' dvidir='${docdir}' pdfdir='${docdir}' psdir='${docdir}' libdir='${exec_prefix}/lib' localedir='${datarootdir}/locale' mandir='${datarootdir}/man' ac_prev= ac_dashdash= for ac_option do # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then eval $ac_prev=\$ac_option ac_prev= continue fi case $ac_option in *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; *) ac_optarg=yes ;; esac # Accept the important Cygnus configure options, so we can diagnose typos. case $ac_dashdash$ac_option in --) ac_dashdash=yes ;; -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) bindir=$ac_optarg ;; -build | --build | --buil | --bui | --bu) ac_prev=build_alias ;; -build=* | --build=* | --buil=* | --bui=* | --bu=*) build_alias=$ac_optarg ;; -cache-file | --cache-file | --cache-fil | --cache-fi \ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ac_prev=cache_file ;; -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) cache_file=$ac_optarg ;; --config-cache | -C) cache_file=config.cache ;; -datadir | --datadir | --datadi | --datad) ac_prev=datadir ;; -datadir=* | --datadir=* | --datadi=* | --datad=*) datadir=$ac_optarg ;; -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ | --dataroo | --dataro | --datar) ac_prev=datarootdir ;; -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) datarootdir=$ac_optarg ;; -disable-* | --disable-*) ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid feature name: $ac_feature" >&2 { (exit 1); exit 1; }; } ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` eval enable_$ac_feature=no ;; -docdir | --docdir | --docdi | --doc | --do) ac_prev=docdir ;; -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) docdir=$ac_optarg ;; -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) ac_prev=dvidir ;; -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) dvidir=$ac_optarg ;; -enable-* | --enable-*) ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid feature name: $ac_feature" >&2 { (exit 1); exit 1; }; } ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` eval enable_$ac_feature=\$ac_optarg ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ | --exec | --exe | --ex) ac_prev=exec_prefix ;; -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ | --exec=* | --exe=* | --ex=*) exec_prefix=$ac_optarg ;; -gas | --gas | --ga | --g) # Obsolete; use --with-gas. with_gas=yes ;; -help | --help | --hel | --he | -h) ac_init_help=long ;; -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) ac_init_help=recursive ;; -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) ac_init_help=short ;; -host | --host | --hos | --ho) ac_prev=host_alias ;; -host=* | --host=* | --hos=* | --ho=*) host_alias=$ac_optarg ;; -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) ac_prev=htmldir ;; -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ | --ht=*) htmldir=$ac_optarg ;; -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ | --includ=* | --inclu=* | --incl=* | --inc=*) includedir=$ac_optarg ;; -infodir | --infodir | --infodi | --infod | --info | --inf) ac_prev=infodir ;; -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) infodir=$ac_optarg ;; -libdir | --libdir | --libdi | --libd) ac_prev=libdir ;; -libdir=* | --libdir=* | --libdi=* | --libd=*) libdir=$ac_optarg ;; -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ | --libexe | --libex | --libe) ac_prev=libexecdir ;; -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ | --libexe=* | --libex=* | --libe=*) libexecdir=$ac_optarg ;; -localedir | --localedir | --localedi | --localed | --locale) ac_prev=localedir ;; -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) localedir=$ac_optarg ;; -localstatedir | --localstatedir | --localstatedi | --localstated \ | --localstate | --localstat | --localsta | --localst | --locals) ac_prev=localstatedir ;; -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) localstatedir=$ac_optarg ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ac_prev=mandir ;; -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) mandir=$ac_optarg ;; -nfp | --nfp | --nf) # Obsolete; use --without-fp. with_fp=no ;; -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c | -n) no_create=yes ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) no_recursion=yes ;; -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ | --oldin | --oldi | --old | --ol | --o) ac_prev=oldincludedir ;; -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) oldincludedir=$ac_optarg ;; -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ac_prev=prefix ;; -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) prefix=$ac_optarg ;; -program-prefix | --program-prefix | --program-prefi | --program-pref \ | --program-pre | --program-pr | --program-p) ac_prev=program_prefix ;; -program-prefix=* | --program-prefix=* | --program-prefi=* \ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) program_prefix=$ac_optarg ;; -program-suffix | --program-suffix | --program-suffi | --program-suff \ | --program-suf | --program-su | --program-s) ac_prev=program_suffix ;; -program-suffix=* | --program-suffix=* | --program-suffi=* \ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) program_suffix=$ac_optarg ;; -program-transform-name | --program-transform-name \ | --program-transform-nam | --program-transform-na \ | --program-transform-n | --program-transform- \ | --program-transform | --program-transfor \ | --program-transfo | --program-transf \ | --program-trans | --program-tran \ | --progr-tra | --program-tr | --program-t) ac_prev=program_transform_name ;; -program-transform-name=* | --program-transform-name=* \ | --program-transform-nam=* | --program-transform-na=* \ | --program-transform-n=* | --program-transform-=* \ | --program-transform=* | --program-transfor=* \ | --program-transfo=* | --program-transf=* \ | --program-trans=* | --program-tran=* \ | --progr-tra=* | --program-tr=* | --program-t=*) program_transform_name=$ac_optarg ;; -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) ac_prev=pdfdir ;; -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) pdfdir=$ac_optarg ;; -psdir | --psdir | --psdi | --psd | --ps) ac_prev=psdir ;; -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) psdir=$ac_optarg ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) silent=yes ;; -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ac_prev=sbindir ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ | --sbi=* | --sb=*) sbindir=$ac_optarg ;; -sharedstatedir | --sharedstatedir | --sharedstatedi \ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ | --sharedst | --shareds | --shared | --share | --shar \ | --sha | --sh) ac_prev=sharedstatedir ;; -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ | --sha=* | --sh=*) sharedstatedir=$ac_optarg ;; -site | --site | --sit) ac_prev=site ;; -site=* | --site=* | --sit=*) site=$ac_optarg ;; -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) srcdir=$ac_optarg ;; -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ | --syscon | --sysco | --sysc | --sys | --sy) ac_prev=sysconfdir ;; -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) sysconfdir=$ac_optarg ;; -target | --target | --targe | --targ | --tar | --ta | --t) ac_prev=target_alias ;; -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) target_alias=$ac_optarg ;; -v | -verbose | --verbose | --verbos | --verbo | --verb) verbose=yes ;; -version | --version | --versio | --versi | --vers | -V) ac_init_version=: ;; -with-* | --with-*) ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid package name: $ac_package" >&2 { (exit 1); exit 1; }; } ac_package=`echo $ac_package | sed 's/[-.]/_/g'` eval with_$ac_package=\$ac_optarg ;; -without-* | --without-*) ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid package name: $ac_package" >&2 { (exit 1); exit 1; }; } ac_package=`echo $ac_package | sed 's/[-.]/_/g'` eval with_$ac_package=no ;; --x) # Obsolete; use --with-x. with_x=yes ;; -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ | --x-incl | --x-inc | --x-in | --x-i) ac_prev=x_includes ;; -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) x_includes=$ac_optarg ;; -x-libraries | --x-libraries | --x-librarie | --x-librari \ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ac_prev=x_libraries ;; -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries=$ac_optarg ;; -*) { echo "$as_me: error: unrecognized option: $ac_option Try \`$0 --help' for more information." >&2 { (exit 1); exit 1; }; } ;; *=*) ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` # Reject names that are not valid shell variable names. expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 { (exit 1); exit 1; }; } eval $ac_envvar=\$ac_optarg export $ac_envvar ;; *) # FIXME: should be removed in autoconf 3.0. echo "$as_me: WARNING: you should use --build, --host, --target" >&2 expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && echo "$as_me: WARNING: invalid host type: $ac_option" >&2 : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} ;; esac done if test -n "$ac_prev"; then ac_option=--`echo $ac_prev | sed 's/_/-/g'` { echo "$as_me: error: missing argument to $ac_option" >&2 { (exit 1); exit 1; }; } fi # Be sure to have absolute directory names. for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ datadir sysconfdir sharedstatedir localstatedir includedir \ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ libdir localedir mandir do eval ac_val=\$$ac_var case $ac_val in [\\/$]* | ?:[\\/]* ) continue;; NONE | '' ) case $ac_var in *prefix ) continue;; esac;; esac { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 { (exit 1); exit 1; }; } done # There might be people who depend on the old broken behavior: `$host' # used to hold the argument of --host etc. # FIXME: To remove some day. build=$build_alias host=$host_alias target=$target_alias # FIXME: To remove some day. if test "x$host_alias" != x; then if test "x$build_alias" = x; then cross_compiling=maybe echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used." >&2 elif test "x$build_alias" != "x$host_alias"; then cross_compiling=yes fi fi ac_tool_prefix= test -n "$host_alias" && ac_tool_prefix=$host_alias- test "$silent" = yes && exec 6>/dev/null ac_pwd=`pwd` && test -n "$ac_pwd" && ac_ls_di=`ls -di .` && ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || { echo "$as_me: error: Working directory cannot be determined" >&2 { (exit 1); exit 1; }; } test "X$ac_ls_di" = "X$ac_pwd_ls_di" || { echo "$as_me: error: pwd does not report name of working directory" >&2 { (exit 1); exit 1; }; } # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes # Try the directory containing this script, then the parent directory. ac_confdir=`$as_dirname -- "$0" || $as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$0" : 'X\(//\)[^/]' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || echo X"$0" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` srcdir=$ac_confdir if test ! -r "$srcdir/$ac_unique_file"; then srcdir=.. fi else ac_srcdir_defaulted=no fi if test ! -r "$srcdir/$ac_unique_file"; then test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 { (exit 1); exit 1; }; } fi ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" ac_abs_confdir=`( cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2 { (exit 1); exit 1; }; } pwd)` # When building in place, set srcdir=. if test "$ac_abs_confdir" = "$ac_pwd"; then srcdir=. fi # Remove unnecessary trailing slashes from srcdir. # Double slashes in file names in object file debugging info # mess up M-x gdb in Emacs. case $srcdir in */) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; esac for ac_var in $ac_precious_vars; do eval ac_env_${ac_var}_set=\${${ac_var}+set} eval ac_env_${ac_var}_value=\$${ac_var} eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} eval ac_cv_env_${ac_var}_value=\$${ac_var} done # # Report the --help message. # if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF \`configure' configures ObexFTP 0.23 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... To assign environment variables (e.g., CC, CFLAGS...), specify them as VAR=VALUE. See below for descriptions of some of the useful variables. Defaults for the options are specified in brackets. Configuration: -h, --help display this help and exit --help=short display options specific to this package --help=recursive display the short help of all the included packages -V, --version display version information and exit -q, --quiet, --silent do not print \`checking...' messages --cache-file=FILE cache test results in FILE [disabled] -C, --config-cache alias for \`--cache-file=config.cache' -n, --no-create do not create output files --srcdir=DIR find the sources in DIR [configure dir or \`..'] Installation directories: --prefix=PREFIX install architecture-independent files in PREFIX [$ac_default_prefix] --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX [PREFIX] By default, \`make install' will install all the files in \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify an installation prefix other than \`$ac_default_prefix' using \`--prefix', for instance \`--prefix=\$HOME'. For better control, use the options below. Fine tuning of the installation directories: --bindir=DIR user executables [EPREFIX/bin] --sbindir=DIR system admin executables [EPREFIX/sbin] --libexecdir=DIR program executables [EPREFIX/libexec] --sysconfdir=DIR read-only single-machine data [PREFIX/etc] --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] --localstatedir=DIR modifiable single-machine data [PREFIX/var] --libdir=DIR object code libraries [EPREFIX/lib] --includedir=DIR C header files [PREFIX/include] --oldincludedir=DIR C header files for non-gcc [/usr/include] --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] --datadir=DIR read-only architecture-independent data [DATAROOTDIR] --infodir=DIR info documentation [DATAROOTDIR/info] --localedir=DIR locale-dependent data [DATAROOTDIR/locale] --mandir=DIR man documentation [DATAROOTDIR/man] --docdir=DIR documentation root [DATAROOTDIR/doc/obexftp] --htmldir=DIR html documentation [DOCDIR] --dvidir=DIR dvi documentation [DOCDIR] --pdfdir=DIR pdf documentation [DOCDIR] --psdir=DIR ps documentation [DOCDIR] _ACEOF cat <<\_ACEOF Program names: --program-prefix=PREFIX prepend PREFIX to installed program names --program-suffix=SUFFIX append SUFFIX to installed program names --program-transform-name=PROGRAM run sed PROGRAM on installed program names System types: --build=BUILD configure for building on BUILD [guessed] --host=HOST cross-compile to build programs to run on HOST [BUILD] _ACEOF fi if test -n "$ac_init_help"; then case $ac_init_help in short | recursive ) echo "Configuration of ObexFTP 0.23:";; esac cat <<\_ACEOF Optional Features: --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] --disable-dependency-tracking speeds up one-time build --enable-dependency-tracking do not reject slow dependency extractors --enable-shared[=PKGS] build shared libraries [default=yes] --enable-static[=PKGS] build static libraries [default=yes] --enable-fast-install[=PKGS] optimize for fast installation [default=yes] --disable-libtool-lock avoid locking (might break parallel builds) --disable-rpath do not hardcode runtime library paths --disable-bluetooth Disables bluetooth support [default=auto] --enable-swig Rebuild language bindings [default=no] --disable-perl Disables perl language bindings [default=auto] --disable-python Disables python language bindings [default=auto] --disable-ruby Disables ruby language bindings [default=auto] --enable-tcl Enables tcl language bindings [default=off] --enable-builddocs Compile documentation [default=no] Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-pic try to use only PIC/non-PIC objects [default=use both] --with-tags[=TAGS] include additional configurations [automatic] --with-gnu-ld assume the C compiler uses GNU ld default=no --with-libiconv-prefix[=DIR] search for libiconv in DIR/include and DIR/lib --without-libiconv-prefix don't search for libiconv in includedir and libdir Some influential environment variables: CC C compiler command CFLAGS C compiler flags LDFLAGS linker flags, e.g. -L if you have libraries in a nonstandard directory LIBS libraries to pass to the linker, e.g. -l CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I if you have headers in a nonstandard directory CPP C preprocessor CXX C++ compiler command CXXFLAGS C++ compiler flags CXXCPP C++ preprocessor F77 Fortran 77 compiler command FFLAGS Fortran 77 compiler flags PKG_CONFIG path to pkg-config utility OPENOBEX_CFLAGS C compiler flags for OPENOBEX, overriding pkg-config OPENOBEX_LIBS linker flags for OPENOBEX, overriding pkg-config BLUETOOTH_CFLAGS C compiler flags for BLUETOOTH, overriding pkg-config BLUETOOTH_LIBS linker flags for BLUETOOTH, overriding pkg-config Use these variables to override the choices made by `configure' or to help it to find libraries and programs with nonstandard names/locations. Report bugs to . _ACEOF ac_status=$? fi if test "$ac_init_help" = "recursive"; then # If there are subdirs, report their specific --help. for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue test -d "$ac_dir" || continue ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix cd "$ac_dir" || { ac_status=$?; continue; } # Check for guested configure. if test -f "$ac_srcdir/configure.gnu"; then echo && $SHELL "$ac_srcdir/configure.gnu" --help=recursive elif test -f "$ac_srcdir/configure"; then echo && $SHELL "$ac_srcdir/configure" --help=recursive else echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 fi || ac_status=$? cd "$ac_pwd" || { ac_status=$?; break; } done fi test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF ObexFTP configure 0.23 generated by GNU Autoconf 2.61 Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. _ACEOF exit fi cat >config.log <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by ObexFTP $as_me 0.23, which was generated by GNU Autoconf 2.61. Invocation command line was $ $0 $@ _ACEOF exec 5>>config.log { cat <<_ASUNAME ## --------- ## ## Platform. ## ## --------- ## hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` uname -m = `(uname -m) 2>/dev/null || echo unknown` uname -r = `(uname -r) 2>/dev/null || echo unknown` uname -s = `(uname -s) 2>/dev/null || echo unknown` uname -v = `(uname -v) 2>/dev/null || echo unknown` /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` /bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` /usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` _ASUNAME as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. echo "PATH: $as_dir" done IFS=$as_save_IFS } >&5 cat >&5 <<_ACEOF ## ----------- ## ## Core tests. ## ## ----------- ## _ACEOF # Keep a trace of the command line. # Strip out --no-create and --no-recursion so they do not pile up. # Strip out --silent because we don't want to record it for future runs. # Also quote any args containing shell meta-characters. # Make two passes to allow for proper duplicate-argument suppression. ac_configure_args= ac_configure_args0= ac_configure_args1= ac_must_keep_next=false for ac_pass in 1 2 do for ac_arg do case $ac_arg in -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) continue ;; *\'*) ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac case $ac_pass in 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; 2) ac_configure_args1="$ac_configure_args1 '$ac_arg'" if test $ac_must_keep_next = true; then ac_must_keep_next=false # Got value, back to normal. else case $ac_arg in *=* | --config-cache | -C | -disable-* | --disable-* \ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ | -with-* | --with-* | -without-* | --without-* | --x) case "$ac_configure_args0 " in "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; esac ;; -* ) ac_must_keep_next=true ;; esac fi ac_configure_args="$ac_configure_args '$ac_arg'" ;; esac done done $as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } $as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there # would cause problems or look ugly. # WARNING: Use '\'' to represent an apostrophe within the trap. # WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. trap 'exit_status=$? # Save into config.log some information that might help in debugging. { echo cat <<\_ASBOX ## ---------------- ## ## Cache variables. ## ## ---------------- ## _ASBOX echo # The following way of writing the cache mishandles newlines in values, ( for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( *) $as_unset $ac_var ;; esac ;; esac done (set) 2>&1 | case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( *${as_nl}ac_space=\ *) sed -n \ "s/'\''/'\''\\\\'\'''\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" ;; #( *) sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; esac | sort ) echo cat <<\_ASBOX ## ----------------- ## ## Output variables. ## ## ----------------- ## _ASBOX echo for ac_var in $ac_subst_vars do eval ac_val=\$$ac_var case $ac_val in *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac echo "$ac_var='\''$ac_val'\''" done | sort echo if test -n "$ac_subst_files"; then cat <<\_ASBOX ## ------------------- ## ## File substitutions. ## ## ------------------- ## _ASBOX echo for ac_var in $ac_subst_files do eval ac_val=\$$ac_var case $ac_val in *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac echo "$ac_var='\''$ac_val'\''" done | sort echo fi if test -s confdefs.h; then cat <<\_ASBOX ## ----------- ## ## confdefs.h. ## ## ----------- ## _ASBOX echo cat confdefs.h echo fi test "$ac_signal" != 0 && echo "$as_me: caught signal $ac_signal" echo "$as_me: exit $exit_status" } >&5 rm -f core *.core core.conftest.* && rm -f -r conftest* confdefs* conf$$* $ac_clean_files && exit $exit_status ' 0 for ac_signal in 1 2 13 15; do trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal done ac_signal=0 # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -f -r conftest* confdefs.h # Predefined preprocessor variables. cat >>confdefs.h <<_ACEOF #define PACKAGE_NAME "$PACKAGE_NAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_TARNAME "$PACKAGE_TARNAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_VERSION "$PACKAGE_VERSION" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_STRING "$PACKAGE_STRING" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" _ACEOF # Let the site file select an alternate cache file if it wants to. # Prefer explicitly selected file to automatically selected ones. if test -n "$CONFIG_SITE"; then set x "$CONFIG_SITE" elif test "x$prefix" != xNONE; then set x "$prefix/share/config.site" "$prefix/etc/config.site" else set x "$ac_default_prefix/share/config.site" \ "$ac_default_prefix/etc/config.site" fi shift for ac_site_file do if test -r "$ac_site_file"; then { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 echo "$as_me: loading site script $ac_site_file" >&6;} sed 's/^/| /' "$ac_site_file" >&5 . "$ac_site_file" fi done if test -r "$cache_file"; then # Some versions of bash will fail to source /dev/null (special # files actually), so we avoid doing that. if test -f "$cache_file"; then { echo "$as_me:$LINENO: loading cache $cache_file" >&5 echo "$as_me: loading cache $cache_file" >&6;} case $cache_file in [\\/]* | ?:[\\/]* ) . "$cache_file";; *) . "./$cache_file";; esac fi else { echo "$as_me:$LINENO: creating cache $cache_file" >&5 echo "$as_me: creating cache $cache_file" >&6;} >$cache_file fi # Check that the precious variables saved in the cache have kept the same # value. ac_cache_corrupted=false for ac_var in $ac_precious_vars; do eval ac_old_set=\$ac_cv_env_${ac_var}_set eval ac_new_set=\$ac_env_${ac_var}_set eval ac_old_val=\$ac_cv_env_${ac_var}_value eval ac_new_val=\$ac_env_${ac_var}_value case $ac_old_set,$ac_new_set in set,) { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ac_cache_corrupted=: ;; ,set) { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ac_cache_corrupted=: ;; ,);; *) if test "x$ac_old_val" != "x$ac_new_val"; then { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 echo "$as_me: former value: $ac_old_val" >&2;} { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 echo "$as_me: current value: $ac_new_val" >&2;} ac_cache_corrupted=: fi;; esac # Pass precious variables to config.status. if test "$ac_new_set" = set; then case $ac_new_val in *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; *) ac_arg=$ac_var=$ac_new_val ;; esac case " $ac_configure_args " in *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; esac fi done if $ac_cache_corrupted; then { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 echo "$as_me: error: changes in the environment can compromise the build" >&2;} { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} { (exit 1); exit 1; }; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu #AC_CONFIG_SRCDIR(src/foo.c) am__api_version="1.9" ac_aux_dir= for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do if test -f "$ac_dir/install-sh"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install-sh -c" break elif test -f "$ac_dir/install.sh"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install.sh -c" break elif test -f "$ac_dir/shtool"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/shtool install -c" break fi done if test -z "$ac_aux_dir"; then { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5 echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;} { (exit 1); exit 1; }; } fi # These three variables are undocumented and unsupported, # and are intended to be withdrawn in a future Autoconf release. # They can cause serious problems if a builder's source tree is in a directory # whose full name contains unusual characters. ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: # SysV /etc/install, /usr/sbin/install # SunOS /usr/etc/install # IRIX /sbin/install # AIX /bin/install # AmigaOS /C/install, which installs bootblocks on floppy discs # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. { echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } if test -z "$INSTALL"; then if test "${ac_cv_path_install+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. # Account for people who put trailing slashes in PATH elements. case $as_dir/ in ./ | .// | /cC/* | \ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ /usr/ucb/* ) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. # Don't use installbsd from OSF since it installs stuff as root # by default. for ac_prog in ginstall scoinst install; do for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then if test $ac_prog = install && grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. : elif test $ac_prog = install && grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # program-specific install script used by HP pwplus--don't use. : else ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" break 3 fi fi done done ;; esac done IFS=$as_save_IFS fi if test "${ac_cv_path_install+set}" = set; then INSTALL=$ac_cv_path_install else # As a last resort, use the slow shell script. Don't cache a # value for INSTALL within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the value is a relative name. INSTALL=$ac_install_sh fi fi { echo "$as_me:$LINENO: result: $INSTALL" >&5 echo "${ECHO_T}$INSTALL" >&6; } # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' { echo "$as_me:$LINENO: checking whether build environment is sane" >&5 echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; } # Just in case sleep 1 echo timestamp > conftest.file # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` if test "$*" = "X"; then # -L didn't work. set X `ls -t $srcdir/configure conftest.file` fi rm -f conftest.file if test "$*" != "X $srcdir/configure conftest.file" \ && test "$*" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken alias in your environment" >&5 echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken alias in your environment" >&2;} { (exit 1); exit 1; }; } fi test "$2" = conftest.file ) then # Ok. : else { { echo "$as_me:$LINENO: error: newly created file is older than distributed files! Check your system clock" >&5 echo "$as_me: error: newly created file is older than distributed files! Check your system clock" >&2;} { (exit 1); exit 1; }; } fi { echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6; } test "$program_prefix" != NONE && program_transform_name="s&^&$program_prefix&;$program_transform_name" # Use a double $ so make ignores it. test "$program_suffix" != NONE && program_transform_name="s&\$&$program_suffix&;$program_transform_name" # Double any \ or $. echo might interpret backslashes. # By default was `s,x,x', remove it if useless. cat <<\_ACEOF >conftest.sed s/[\\$]/&&/g;s/;s,x,x,$// _ACEOF program_transform_name=`echo $program_transform_name | sed -f conftest.sed` rm -f conftest.sed # expand $ac_aux_dir to an absolute path am_aux_dir=`cd $ac_aux_dir && pwd` test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" # Use eval to expand $SHELL if eval "$MISSING --run true"; then am_missing_run="$MISSING --run " else am_missing_run= { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} fi if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then # We used to keeping the `.' as first argument, in order to # allow $(mkdir_p) to be used without argument. As in # $(mkdir_p) $(somedir) # where $(somedir) is conditionally defined. However this is wrong # for two reasons: # 1. if the package is installed by a user who cannot write `.' # make install will fail, # 2. the above comment should most certainly read # $(mkdir_p) $(DESTDIR)$(somedir) # so it does not work when $(somedir) is undefined and # $(DESTDIR) is not. # To support the latter case, we have to write # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), # so the `.' trick is pointless. mkdir_p='mkdir -p --' else # On NextStep and OpenStep, the `mkdir' command does not # recognize any option. It will interpret all options as # directories to create, and then abort because `.' already # exists. for d in ./-p ./--version; do test -d $d && rmdir $d done # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. if test -f "$ac_aux_dir/mkinstalldirs"; then mkdir_p='$(mkinstalldirs)' else mkdir_p='$(install_sh) -d' fi fi for ac_prog in gawk mawk nawk awk do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_AWK+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$AWK"; then ac_cv_prog_AWK="$AWK" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_AWK="$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi AWK=$ac_cv_prog_AWK if test -n "$AWK"; then { echo "$as_me:$LINENO: result: $AWK" >&5 echo "${ECHO_T}$AWK" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi test -n "$AWK" && break done { echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; } set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.make <<\_ACEOF SHELL = /bin/sh all: @echo '@@@%%%=$(MAKE)=@@@%%%' _ACEOF # GNU make sometimes prints "make[1]: Entering...", which would confuse us. case `${MAKE-make} -f conftest.make 2>/dev/null` in *@@@%%%=?*=@@@%%%*) eval ac_cv_prog_make_${ac_make}_set=yes;; *) eval ac_cv_prog_make_${ac_make}_set=no;; esac rm -f conftest.make fi if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then { echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6; } SET_MAKE= else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } SET_MAKE="MAKE=${MAKE-make}" fi rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null # test to see if srcdir already configured if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} { (exit 1); exit 1; }; } fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi # Define the identity of the package. PACKAGE='obexftp' VERSION='0.23' cat >>confdefs.h <<_ACEOF #define PACKAGE "$PACKAGE" _ACEOF cat >>confdefs.h <<_ACEOF #define VERSION "$VERSION" _ACEOF # Some tools Automake needs. ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} install_sh=${install_sh-"$am_aux_dir/install-sh"} # Installed binaries are usually stripped using `strip' when the user # run `make install-strip'. However `strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the `STRIP' environment variable to overrule this program. if test "$cross_compiling" != no; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_STRIP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then { echo "$as_me:$LINENO: result: $STRIP" >&5 echo "${ECHO_T}$STRIP" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi fi if test -z "$ac_cv_prog_STRIP"; then ac_ct_STRIP=$STRIP # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_ct_STRIP"; then ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_STRIP="strip" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 echo "${ECHO_T}$ac_ct_STRIP" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi if test "x$ac_ct_STRIP" = x; then STRIP=":" else case $cross_compiling:$ac_tool_warned in yes:) { echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&5 echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&2;} ac_tool_warned=yes ;; esac STRIP=$ac_ct_STRIP fi else STRIP="$ac_cv_prog_STRIP" fi fi INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" # We need awk for the "check" target. The system "awk" is bad on # some platforms. # Always define AMTAR for backward compatibility. AMTAR=${AMTAR-"${am_missing_run}tar"} am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' ac_config_headers="$ac_config_headers config.h" # note: AC_HELP_STRING is deprecated in autoconf 2.59 and later but # AS_HELP_STRING is not available in autoconf 2.57 or earlier. # Checks for programs. DEPDIR="${am__leading_dot}deps" ac_config_commands="$ac_config_commands depfiles" am_make=${MAKE-make} cat > confinc << 'END' am__doit: @echo done .PHONY: am__doit END # If we don't find an include directive, just comment out the code. { echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6; } am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf # We grep out `Entering directory' and `Leaving directory' # messages which can occur if `w' ends up in MAKEFLAGS. # In particular we don't look at `^make:' because GNU make might # be invoked under some other name (usually "gmake"), in which # case it prints its new name instead of `make'. if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then am__include=include am__quote= _am_result=GNU fi # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then am__include=.include am__quote="\"" _am_result=BSD fi fi { echo "$as_me:$LINENO: result: $_am_result" >&5 echo "${ECHO_T}$_am_result" >&6; } rm -f confinc confmf # Check whether --enable-dependency-tracking was given. if test "${enable_dependency_tracking+set}" = set; then enableval=$enable_dependency_tracking; fi if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' fi if test "x$enable_dependency_tracking" != xno; then AMDEP_TRUE= AMDEP_FALSE='#' else AMDEP_TRUE='#' AMDEP_FALSE= fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="${ac_tool_prefix}gcc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { echo "$as_me:$LINENO: result: $CC" >&5 echo "${ECHO_T}$CC" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi fi if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CC="gcc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 echo "${ECHO_T}$ac_ct_CC" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&5 echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi else CC="$ac_cv_prog_CC" fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="${ac_tool_prefix}cc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { echo "$as_me:$LINENO: result: $CC" >&5 echo "${ECHO_T}$CC" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi fi fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else ac_prog_rejected=no as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift if test $# != 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" fi fi fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { echo "$as_me:$LINENO: result: $CC" >&5 echo "${ECHO_T}$CC" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then for ac_prog in cl.exe do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { echo "$as_me:$LINENO: result: $CC" >&5 echo "${ECHO_T}$CC" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi test -n "$CC" && break done fi if test -z "$CC"; then ac_ct_CC=$CC for ac_prog in cl.exe do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CC="$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 echo "${ECHO_T}$ac_ct_CC" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi test -n "$ac_ct_CC" && break done if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&5 echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi fi fi test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH See \`config.log' for more details." >&5 echo "$as_me: error: no acceptable C compiler found in \$PATH See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } # Provide some information about the compiler. echo "$as_me:$LINENO: checking for C compiler version" >&5 ac_compiler=`set X $ac_compile; echo $2` { (ac_try="$ac_compiler --version >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compiler --version >&5") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } { (ac_try="$ac_compiler -v >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compiler -v >&5") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } { (ac_try="$ac_compiler -V >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compiler -V >&5") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files a.out a.exe b.out" # Try to create an executable without -o first, disregard a.out. # It will help us diagnose broken compilers, and finding out an intuition # of exeext. { echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; } ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` # # List of possible output files, starting from the most likely. # The algorithm is not robust to junk in `.', hence go to wildcards (a.*) # only as a last resort. b.out is created by i960 compilers. ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out' # # The IRIX 6 linker writes into existing files which may not be # executable, retaining their permissions. Remove them first so a # subsequent execution test works. ac_rmfiles= for ac_file in $ac_files do case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; * ) ac_rmfiles="$ac_rmfiles $ac_file";; esac done rm -f $ac_rmfiles if { (ac_try="$ac_link_default" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_link_default") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. # So ignore a value of `no', otherwise this would lead to `EXEEXT = no' # in a Makefile. We should not override ac_cv_exeext if it was cached, # so that the user can short-circuit this test for compilers unknown to # Autoconf. for ac_file in $ac_files '' do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; [ab].out ) # We found the default executable, but exeext='' is most # certainly right. break;; *.* ) if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; then :; else ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` fi # We set ac_cv_exeext here because the later test for it is not # safe: cross compilers may not add the suffix if given an `-o' # argument, so we may need to know it at that point already. # Even if this section looks crufty: it has the advantage of # actually working. break;; * ) break;; esac done test "$ac_cv_exeext" = no && ac_cv_exeext= else ac_file='' fi { echo "$as_me:$LINENO: result: $ac_file" >&5 echo "${ECHO_T}$ac_file" >&6; } if test -z "$ac_file"; then echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { echo "$as_me:$LINENO: error: C compiler cannot create executables See \`config.log' for more details." >&5 echo "$as_me: error: C compiler cannot create executables See \`config.log' for more details." >&2;} { (exit 77); exit 77; }; } fi ac_exeext=$ac_cv_exeext # Check that the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. { echo "$as_me:$LINENO: checking whether the C compiler works" >&5 echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; } # FIXME: These cross compiler hacks should be removed for Autoconf 3.0 # If not cross compiling, check that we can run a simple program. if test "$cross_compiling" != yes; then if { ac_try='./$ac_file' { (case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then cross_compiling=no else if test "$cross_compiling" = maybe; then cross_compiling=yes else { { echo "$as_me:$LINENO: error: cannot run C compiled programs. If you meant to cross compile, use \`--host'. See \`config.log' for more details." >&5 echo "$as_me: error: cannot run C compiled programs. If you meant to cross compile, use \`--host'. See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } fi fi fi { echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6; } rm -f a.out a.exe conftest$ac_cv_exeext b.out ac_clean_files=$ac_clean_files_save # Check that the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. { echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; } { echo "$as_me:$LINENO: result: $cross_compiling" >&5 echo "${ECHO_T}$cross_compiling" >&6; } { echo "$as_me:$LINENO: checking for suffix of executables" >&5 echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; } if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_link") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then # If both `conftest.exe' and `conftest' are `present' (well, observable) # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will # work properly (i.e., refer to `conftest.exe'), while it won't with # `rm'. for ac_file in conftest.exe conftest conftest.*; do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` break;; * ) break;; esac done else { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link See \`config.log' for more details." >&5 echo "$as_me: error: cannot compute suffix of executables: cannot compile and link See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } fi rm -f conftest$ac_cv_exeext { echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 echo "${ECHO_T}$ac_cv_exeext" >&6; } rm -f conftest.$ac_ext EXEEXT=$ac_cv_exeext ac_exeext=$EXEEXT { echo "$as_me:$LINENO: checking for suffix of object files" >&5 echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; } if test "${ac_cv_objext+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.o conftest.obj if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then for ac_file in conftest.o conftest.obj conftest.*; do test -f "$ac_file" || continue; case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;; *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` break;; esac done else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile See \`config.log' for more details." >&5 echo "$as_me: error: cannot compute suffix of object files: cannot compile See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } fi rm -f conftest.$ac_cv_objext conftest.$ac_ext fi { echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 echo "${ECHO_T}$ac_cv_objext" >&6; } OBJEXT=$ac_cv_objext ac_objext=$OBJEXT { echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; } if test "${ac_cv_c_compiler_gnu+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { #ifndef __GNUC__ choke me #endif ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_compiler_gnu=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_compiler_gnu=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi { echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; } GCC=`test $ac_compiler_gnu = yes && echo yes` ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS { echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; } if test "${ac_cv_prog_cc_g+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_save_c_werror_flag=$ac_c_werror_flag ac_c_werror_flag=yes ac_cv_prog_cc_g=no CFLAGS="-g" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_prog_cc_g=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 CFLAGS="" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then : else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_c_werror_flag=$ac_save_c_werror_flag CFLAGS="-g" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_prog_cc_g=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_c_werror_flag=$ac_save_c_werror_flag fi { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; } if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then if test "$GCC" = yes; then CFLAGS="-g -O2" else CFLAGS="-g" fi else if test "$GCC" = yes; then CFLAGS="-O2" else CFLAGS= fi fi { echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; } if test "${ac_cv_prog_cc_c89+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_cv_prog_cc_c89=no ac_save_CC=$CC cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include #include #include /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ struct buf { int x; }; FILE * (*rcsopen) (struct buf *, struct stat *, int); static char *e (p, i) char **p; int i; { return p[i]; } static char *f (char * (*g) (char **, int), char **p, ...) { char *s; va_list v; va_start (v,p); s = g (p, va_arg (v,int)); va_end (v); return s; } /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has function prototypes and stuff, but not '\xHH' hex character constants. These don't provoke an error unfortunately, instead are silently treated as 'x'. The following induces an error, until -std is added to get proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an array size at least. It's necessary to write '\x00'==0 to get something that's true only with -std. */ int osf4_cc_array ['\x00' == 0 ? 1 : -1]; /* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters inside strings and character constants. */ #define FOO(x) 'x' int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; int test (int i, double x); struct s1 {int (*f) (int a);}; struct s2 {int (*f) (double a);}; int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); int argc; char **argv; int main () { return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; ; return 0; } _ACEOF for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_prog_cc_c89=$ac_arg else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext test "x$ac_cv_prog_cc_c89" != "xno" && break done rm -f conftest.$ac_ext CC=$ac_save_CC fi # AC_CACHE_VAL case "x$ac_cv_prog_cc_c89" in x) { echo "$as_me:$LINENO: result: none needed" >&5 echo "${ECHO_T}none needed" >&6; } ;; xno) { echo "$as_me:$LINENO: result: unsupported" >&5 echo "${ECHO_T}unsupported" >&6; } ;; *) CC="$CC $ac_cv_prog_cc_c89" { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;; esac ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu depcc="$CC" am_compiler_list= { echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; } if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named `D' -- because `-MD' means `put the output # in D'. mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_CC_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` fi for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with # Solaris 8's {/usr,}/bin/sh. touch sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf case $depmode in nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; none) break ;; esac # We check with `-c' and `-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle `-M -o', and we need to detect this. if depmode=$depmode \ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_CC_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_CC_dependencies_compiler_type=none fi fi { echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; } CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type if test "x$enable_dependency_tracking" != xno \ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then am__fastdepCC_TRUE= am__fastdepCC_FALSE='#' else am__fastdepCC_TRUE='#' am__fastdepCC_FALSE= fi { echo "$as_me:$LINENO: checking for library containing strerror" >&5 echo $ECHO_N "checking for library containing strerror... $ECHO_C" >&6; } if test "${ac_cv_search_strerror+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_func_search_save_LIBS=$LIBS cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char strerror (); int main () { return strerror (); ; return 0; } _ACEOF for ac_lib in '' cposix; do if test -z "$ac_lib"; then ac_res="none required" else ac_res=-l$ac_lib LIBS="-l$ac_lib $ac_func_search_save_LIBS" fi rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && $as_test_x conftest$ac_exeext; then ac_cv_search_strerror=$ac_res else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext if test "${ac_cv_search_strerror+set}" = set; then break fi done if test "${ac_cv_search_strerror+set}" = set; then : else ac_cv_search_strerror=no fi rm conftest.$ac_ext LIBS=$ac_func_search_save_LIBS fi { echo "$as_me:$LINENO: result: $ac_cv_search_strerror" >&5 echo "${ECHO_T}$ac_cv_search_strerror" >&6; } ac_res=$ac_cv_search_strerror if test "$ac_res" != no; then test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="${ac_tool_prefix}gcc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { echo "$as_me:$LINENO: result: $CC" >&5 echo "${ECHO_T}$CC" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi fi if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CC="gcc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 echo "${ECHO_T}$ac_ct_CC" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&5 echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi else CC="$ac_cv_prog_CC" fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="${ac_tool_prefix}cc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { echo "$as_me:$LINENO: result: $CC" >&5 echo "${ECHO_T}$CC" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi fi fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else ac_prog_rejected=no as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift if test $# != 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" fi fi fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { echo "$as_me:$LINENO: result: $CC" >&5 echo "${ECHO_T}$CC" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then for ac_prog in cl.exe do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { echo "$as_me:$LINENO: result: $CC" >&5 echo "${ECHO_T}$CC" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi test -n "$CC" && break done fi if test -z "$CC"; then ac_ct_CC=$CC for ac_prog in cl.exe do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CC="$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 echo "${ECHO_T}$ac_ct_CC" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi test -n "$ac_ct_CC" && break done if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&5 echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi fi fi test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH See \`config.log' for more details." >&5 echo "$as_me: error: no acceptable C compiler found in \$PATH See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } # Provide some information about the compiler. echo "$as_me:$LINENO: checking for C compiler version" >&5 ac_compiler=`set X $ac_compile; echo $2` { (ac_try="$ac_compiler --version >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compiler --version >&5") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } { (ac_try="$ac_compiler -v >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compiler -v >&5") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } { (ac_try="$ac_compiler -V >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compiler -V >&5") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } { echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; } if test "${ac_cv_c_compiler_gnu+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { #ifndef __GNUC__ choke me #endif ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_compiler_gnu=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_compiler_gnu=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi { echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; } GCC=`test $ac_compiler_gnu = yes && echo yes` ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS { echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; } if test "${ac_cv_prog_cc_g+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_save_c_werror_flag=$ac_c_werror_flag ac_c_werror_flag=yes ac_cv_prog_cc_g=no CFLAGS="-g" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_prog_cc_g=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 CFLAGS="" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then : else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_c_werror_flag=$ac_save_c_werror_flag CFLAGS="-g" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_prog_cc_g=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_c_werror_flag=$ac_save_c_werror_flag fi { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; } if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then if test "$GCC" = yes; then CFLAGS="-g -O2" else CFLAGS="-g" fi else if test "$GCC" = yes; then CFLAGS="-O2" else CFLAGS= fi fi { echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; } if test "${ac_cv_prog_cc_c89+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_cv_prog_cc_c89=no ac_save_CC=$CC cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include #include #include /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ struct buf { int x; }; FILE * (*rcsopen) (struct buf *, struct stat *, int); static char *e (p, i) char **p; int i; { return p[i]; } static char *f (char * (*g) (char **, int), char **p, ...) { char *s; va_list v; va_start (v,p); s = g (p, va_arg (v,int)); va_end (v); return s; } /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has function prototypes and stuff, but not '\xHH' hex character constants. These don't provoke an error unfortunately, instead are silently treated as 'x'. The following induces an error, until -std is added to get proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an array size at least. It's necessary to write '\x00'==0 to get something that's true only with -std. */ int osf4_cc_array ['\x00' == 0 ? 1 : -1]; /* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters inside strings and character constants. */ #define FOO(x) 'x' int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; int test (int i, double x); struct s1 {int (*f) (int a);}; struct s2 {int (*f) (double a);}; int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); int argc; char **argv; int main () { return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; ; return 0; } _ACEOF for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_prog_cc_c89=$ac_arg else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext test "x$ac_cv_prog_cc_c89" != "xno" && break done rm -f conftest.$ac_ext CC=$ac_save_CC fi # AC_CACHE_VAL case "x$ac_cv_prog_cc_c89" in x) { echo "$as_me:$LINENO: result: none needed" >&5 echo "${ECHO_T}none needed" >&6; } ;; xno) { echo "$as_me:$LINENO: result: unsupported" >&5 echo "${ECHO_T}unsupported" >&6; } ;; *) CC="$CC $ac_cv_prog_cc_c89" { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;; esac ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu depcc="$CC" am_compiler_list= { echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; } if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named `D' -- because `-MD' means `put the output # in D'. mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_CC_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` fi for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with # Solaris 8's {/usr,}/bin/sh. touch sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf case $depmode in nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; none) break ;; esac # We check with `-c' and `-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle `-M -o', and we need to detect this. if depmode=$depmode \ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_CC_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_CC_dependencies_compiler_type=none fi fi { echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; } CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type if test "x$enable_dependency_tracking" != xno \ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then am__fastdepCC_TRUE= am__fastdepCC_FALSE='#' else am__fastdepCC_TRUE='#' am__fastdepCC_FALSE= fi # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: # SysV /etc/install, /usr/sbin/install # SunOS /usr/etc/install # IRIX /sbin/install # AIX /bin/install # AmigaOS /C/install, which installs bootblocks on floppy discs # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. { echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } if test -z "$INSTALL"; then if test "${ac_cv_path_install+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. # Account for people who put trailing slashes in PATH elements. case $as_dir/ in ./ | .// | /cC/* | \ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ /usr/ucb/* ) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. # Don't use installbsd from OSF since it installs stuff as root # by default. for ac_prog in ginstall scoinst install; do for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then if test $ac_prog = install && grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. : elif test $ac_prog = install && grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # program-specific install script used by HP pwplus--don't use. : else ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" break 3 fi fi done done ;; esac done IFS=$as_save_IFS fi if test "${ac_cv_path_install+set}" = set; then INSTALL=$ac_cv_path_install else # As a last resort, use the slow shell script. Don't cache a # value for INSTALL within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the value is a relative name. INSTALL=$ac_install_sh fi fi { echo "$as_me:$LINENO: result: $INSTALL" >&5 echo "${ECHO_T}$INSTALL" >&6; } # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' { echo "$as_me:$LINENO: checking whether ln -s works" >&5 echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6; } LN_S=$as_ln_s if test "$LN_S" = "ln -s"; then { echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6; } else { echo "$as_me:$LINENO: result: no, using $LN_S" >&5 echo "${ECHO_T}no, using $LN_S" >&6; } fi # Initialize libtool # Check whether --enable-shared was given. if test "${enable_shared+set}" = set; then enableval=$enable_shared; p=${PACKAGE-default} case $enableval in yes) enable_shared=yes ;; no) enable_shared=no ;; *) enable_shared=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_shared=yes fi done IFS="$lt_save_ifs" ;; esac else enable_shared=yes fi # Check whether --enable-static was given. if test "${enable_static+set}" = set; then enableval=$enable_static; p=${PACKAGE-default} case $enableval in yes) enable_static=yes ;; no) enable_static=no ;; *) enable_static=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_static=yes fi done IFS="$lt_save_ifs" ;; esac else enable_static=yes fi # Check whether --enable-fast-install was given. if test "${enable_fast_install+set}" = set; then enableval=$enable_fast_install; p=${PACKAGE-default} case $enableval in yes) enable_fast_install=yes ;; no) enable_fast_install=no ;; *) enable_fast_install=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_fast_install=yes fi done IFS="$lt_save_ifs" ;; esac else enable_fast_install=yes fi # Make sure we can run config.sub. $SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5 echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;} { (exit 1); exit 1; }; } { echo "$as_me:$LINENO: checking build system type" >&5 echo $ECHO_N "checking build system type... $ECHO_C" >&6; } if test "${ac_cv_build+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_build_alias=$build_alias test "x$ac_build_alias" = x && ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` test "x$ac_build_alias" = x && { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 echo "$as_me: error: cannot guess build type; you must specify one" >&2;} { (exit 1); exit 1; }; } ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5 echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;} { (exit 1); exit 1; }; } fi { echo "$as_me:$LINENO: result: $ac_cv_build" >&5 echo "${ECHO_T}$ac_cv_build" >&6; } case $ac_cv_build in *-*-*) ;; *) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5 echo "$as_me: error: invalid value of canonical build" >&2;} { (exit 1); exit 1; }; };; esac build=$ac_cv_build ac_save_IFS=$IFS; IFS='-' set x $ac_cv_build shift build_cpu=$1 build_vendor=$2 shift; shift # Remember, the first character of IFS is used to create $*, # except with old shells: build_os=$* IFS=$ac_save_IFS case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac { echo "$as_me:$LINENO: checking host system type" >&5 echo $ECHO_N "checking host system type... $ECHO_C" >&6; } if test "${ac_cv_host+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test "x$host_alias" = x; then ac_cv_host=$ac_cv_build else ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5 echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;} { (exit 1); exit 1; }; } fi fi { echo "$as_me:$LINENO: result: $ac_cv_host" >&5 echo "${ECHO_T}$ac_cv_host" >&6; } case $ac_cv_host in *-*-*) ;; *) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5 echo "$as_me: error: invalid value of canonical host" >&2;} { (exit 1); exit 1; }; };; esac host=$ac_cv_host ac_save_IFS=$IFS; IFS='-' set x $ac_cv_host shift host_cpu=$1 host_vendor=$2 shift; shift # Remember, the first character of IFS is used to create $*, # except with old shells: host_os=$* IFS=$ac_save_IFS case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac { echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5 echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6; } if test "${lt_cv_path_SED+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else # Loop through the user's path and test for sed and gsed. # Then use that list of sed's as ones to test for truncation. as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for lt_ac_prog in sed gsed; do for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$lt_ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$lt_ac_prog$ac_exec_ext"; }; then lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" fi done done done IFS=$as_save_IFS lt_ac_max=0 lt_ac_count=0 # Add /usr/xpg4/bin/sed as it is typically found on Solaris # along with /bin/sed that truncates output. for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do test ! -f $lt_ac_sed && continue cat /dev/null > conftest.in lt_ac_count=0 echo $ECHO_N "0123456789$ECHO_C" >conftest.in # Check for GNU sed and select it if it is found. if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then lt_cv_path_SED=$lt_ac_sed break fi while true; do cat conftest.in conftest.in >conftest.tmp mv conftest.tmp conftest.in cp conftest.in conftest.nl echo >>conftest.nl $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break cmp -s conftest.out conftest.nl || break # 10000 chars as input seems more than enough test $lt_ac_count -gt 10 && break lt_ac_count=`expr $lt_ac_count + 1` if test $lt_ac_count -gt $lt_ac_max; then lt_ac_max=$lt_ac_count lt_cv_path_SED=$lt_ac_sed fi done done fi SED=$lt_cv_path_SED { echo "$as_me:$LINENO: result: $SED" >&5 echo "${ECHO_T}$SED" >&6; } { echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5 echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; } if test "${ac_cv_path_GREP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else # Extract the first word of "grep ggrep" to use in msg output if test -z "$GREP"; then set dummy grep ggrep; ac_prog_name=$2 if test "${ac_cv_path_GREP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_path_GREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in grep ggrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue # Check for GNU ac_path_GREP and select it if it is found. # Check for GNU $ac_path_GREP case `"$ac_path_GREP" --version 2>&1` in *GNU*) ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; *) ac_count=0 echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" echo 'GREP' >> "conftest.nl" "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break ac_count=`expr $ac_count + 1` if test $ac_count -gt ${ac_path_GREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_GREP_found && break 3 done done done IFS=$as_save_IFS fi GREP="$ac_cv_path_GREP" if test -z "$GREP"; then { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} { (exit 1); exit 1; }; } fi else ac_cv_path_GREP=$GREP fi fi { echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5 echo "${ECHO_T}$ac_cv_path_GREP" >&6; } GREP="$ac_cv_path_GREP" { echo "$as_me:$LINENO: checking for egrep" >&5 echo $ECHO_N "checking for egrep... $ECHO_C" >&6; } if test "${ac_cv_path_EGREP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 then ac_cv_path_EGREP="$GREP -E" else # Extract the first word of "egrep" to use in msg output if test -z "$EGREP"; then set dummy egrep; ac_prog_name=$2 if test "${ac_cv_path_EGREP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_path_EGREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in egrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue # Check for GNU ac_path_EGREP and select it if it is found. # Check for GNU $ac_path_EGREP case `"$ac_path_EGREP" --version 2>&1` in *GNU*) ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; *) ac_count=0 echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" echo 'EGREP' >> "conftest.nl" "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break ac_count=`expr $ac_count + 1` if test $ac_count -gt ${ac_path_EGREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_EGREP_found && break 3 done done done IFS=$as_save_IFS fi EGREP="$ac_cv_path_EGREP" if test -z "$EGREP"; then { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} { (exit 1); exit 1; }; } fi else ac_cv_path_EGREP=$EGREP fi fi fi { echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5 echo "${ECHO_T}$ac_cv_path_EGREP" >&6; } EGREP="$ac_cv_path_EGREP" # Check whether --with-gnu-ld was given. if test "${with_gnu_ld+set}" = set; then withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes else with_gnu_ld=no fi ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. { echo "$as_me:$LINENO: checking for ld used by $CC" >&5 echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; } case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [\\/]* | ?:[\\/]*) re_direlt='/[^/][^/]*/\.\./' # Canonicalize the pathname of ld ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then { echo "$as_me:$LINENO: checking for GNU ld" >&5 echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; } else { echo "$as_me:$LINENO: checking for non-GNU ld" >&5 echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; } fi if test "${lt_cv_path_LD+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -z "$LD"; then lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some variants of GNU ld only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$lt_cv_path_LD" -v 2>&1 &5 echo "${ECHO_T}$LD" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} { (exit 1); exit 1; }; } { echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; } if test "${lt_cv_prog_gnu_ld+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else # I'd rather use --version here, but apparently some GNU lds only accept -v. case `$LD -v 2>&1 &5 echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6; } with_gnu_ld=$lt_cv_prog_gnu_ld { echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6; } if test "${lt_cv_ld_reload_flag+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_ld_reload_flag='-r' fi { echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6; } reload_flag=$lt_cv_ld_reload_flag case $reload_flag in "" | " "*) ;; *) reload_flag=" $reload_flag" ;; esac reload_cmds='$LD$reload_flag -o $output$reload_objs' case $host_os in darwin*) if test "$GCC" = yes; then reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' else reload_cmds='$LD$reload_flag -o $output$reload_objs' fi ;; esac { echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5 echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6; } if test "${lt_cv_path_NM+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$NM"; then # Let the user override the test. lt_cv_path_NM="$NM" else lt_nm_to_check="${ac_tool_prefix}nm" if test -n "$ac_tool_prefix" && test "$build" = "$host"; then lt_nm_to_check="$lt_nm_to_check nm" fi for lt_tmp_nm in $lt_nm_to_check; do lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. tmp_nm="$ac_dir/$lt_tmp_nm" if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then # Check to see if the nm accepts a BSD-compat flag. # Adding the `sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored # Tru64's nm complains that /dev/null is an invalid object file case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in */dev/null* | *'Invalid file or object type'*) lt_cv_path_NM="$tmp_nm -B" break ;; *) case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in */dev/null*) lt_cv_path_NM="$tmp_nm -p" break ;; *) lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but continue # so that we can try to find one that supports BSD flags ;; esac ;; esac fi done IFS="$lt_save_ifs" done test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm fi fi { echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5 echo "${ECHO_T}$lt_cv_path_NM" >&6; } NM="$lt_cv_path_NM" { echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5 echo $ECHO_N "checking how to recognize dependent libraries... $ECHO_C" >&6; } if test "${lt_cv_deplibs_check_method+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_file_magic_cmd='$MAGIC_CMD' lt_cv_file_magic_test_file= lt_cv_deplibs_check_method='unknown' # Need to set the preceding variable on all platforms that support # interlibrary dependencies. # 'none' -- dependencies not supported. # `unknown' -- same as none, but documents that we really don't know. # 'pass_all' -- all dependencies passed with no checks. # 'test_compile' -- check by making test program. # 'file_magic [[regex]]' -- check by looking for files in library path # which responds to the $file_magic_cmd with a given extended regex. # If you have `file' or equivalent on your system and you're not sure # whether `pass_all' will *always* work, you probably want this one. case $host_os in aix[4-9]*) lt_cv_deplibs_check_method=pass_all ;; beos*) lt_cv_deplibs_check_method=pass_all ;; bsdi[45]*) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' lt_cv_file_magic_cmd='/usr/bin/file -L' lt_cv_file_magic_test_file=/shlib/libc.so ;; cygwin*) # func_win32_libid is a shell function defined in ltmain.sh lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' lt_cv_file_magic_cmd='func_win32_libid' ;; mingw* | pw32*) # Base MSYS/MinGW do not provide the 'file' command needed by # func_win32_libid shell function, so use a weaker test based on 'objdump', # unless we find 'file', for example because we are cross-compiling. if ( file / ) >/dev/null 2>&1; then lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' lt_cv_file_magic_cmd='func_win32_libid' else lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' lt_cv_file_magic_cmd='$OBJDUMP -f' fi ;; darwin* | rhapsody*) lt_cv_deplibs_check_method=pass_all ;; freebsd* | dragonfly*) if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then case $host_cpu in i*86 ) # Not sure whether the presence of OpenBSD here was a mistake. # Let's accept both of them until this is cleared up. lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ;; esac else lt_cv_deplibs_check_method=pass_all fi ;; gnu*) lt_cv_deplibs_check_method=pass_all ;; hpux10.20* | hpux11*) lt_cv_file_magic_cmd=/usr/bin/file case $host_cpu in ia64*) lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so ;; hppa*64*) lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]' lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl ;; *) lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' lt_cv_file_magic_test_file=/usr/lib/libc.sl ;; esac ;; interix[3-9]*) # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' ;; irix5* | irix6* | nonstopux*) case $LD in *-32|*"-32 ") libmagic=32-bit;; *-n32|*"-n32 ") libmagic=N32;; *-64|*"-64 ") libmagic=64-bit;; *) libmagic=never-match;; esac lt_cv_deplibs_check_method=pass_all ;; # This must be Linux ELF. linux* | k*bsd*-gnu) lt_cv_deplibs_check_method=pass_all ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' fi ;; newos6*) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=/usr/lib/libnls.so ;; nto-qnx*) lt_cv_deplibs_check_method=unknown ;; openbsd*) if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' fi ;; osf3* | osf4* | osf5*) lt_cv_deplibs_check_method=pass_all ;; rdos*) lt_cv_deplibs_check_method=pass_all ;; solaris*) lt_cv_deplibs_check_method=pass_all ;; sysv4 | sysv4.3*) case $host_vendor in motorola) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ;; ncr) lt_cv_deplibs_check_method=pass_all ;; sequent) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;; sni) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" lt_cv_file_magic_test_file=/lib/libc.so ;; siemens) lt_cv_deplibs_check_method=pass_all ;; pc) lt_cv_deplibs_check_method=pass_all ;; esac ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) lt_cv_deplibs_check_method=pass_all ;; esac fi { echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6; } file_magic_cmd=$lt_cv_file_magic_cmd deplibs_check_method=$lt_cv_deplibs_check_method test -z "$deplibs_check_method" && deplibs_check_method=unknown # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} # If no C compiler flags were specified, use CFLAGS. LTCFLAGS=${LTCFLAGS-"$CFLAGS"} # Allow CC to be a program name with arguments. compiler=$CC # Check whether --enable-libtool-lock was given. if test "${enable_libtool_lock+set}" = set; then enableval=$enable_libtool_lock; fi test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes # Some flags need to be propagated to the compiler or linker for good # libtool support. case $host in ia64-*-hpux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then case `/usr/bin/file conftest.$ac_objext` in *ELF-32*) HPUX_IA64_MODE="32" ;; *ELF-64*) HPUX_IA64_MODE="64" ;; esac fi rm -rf conftest* ;; *-*-irix6*) # Find out which ABI we are using. echo '#line 5323 "configure"' > conftest.$ac_ext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then if test "$lt_cv_prog_gnu_ld" = yes; then case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -melf32bsmip" ;; *N32*) LD="${LD-ld} -melf32bmipn32" ;; *64-bit*) LD="${LD-ld} -melf64bmip" ;; esac else case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -32" ;; *N32*) LD="${LD-ld} -n32" ;; *64-bit*) LD="${LD-ld} -64" ;; esac fi fi rm -rf conftest* ;; x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ s390*-*linux*|sparc*-*linux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then case `/usr/bin/file conftest.o` in *32-bit*) case $host in x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_i386_fbsd" ;; x86_64-*linux*) LD="${LD-ld} -m elf_i386" ;; ppc64-*linux*|powerpc64-*linux*) LD="${LD-ld} -m elf32ppclinux" ;; s390x-*linux*) LD="${LD-ld} -m elf_s390" ;; sparc64-*linux*) LD="${LD-ld} -m elf32_sparc" ;; esac ;; *64-bit*) case $host in x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_x86_64_fbsd" ;; x86_64-*linux*) LD="${LD-ld} -m elf_x86_64" ;; ppc*-*linux*|powerpc*-*linux*) LD="${LD-ld} -m elf64ppc" ;; s390*-*linux*) LD="${LD-ld} -m elf64_s390" ;; sparc*-*linux*) LD="${LD-ld} -m elf64_sparc" ;; esac ;; esac fi rm -rf conftest* ;; *-*-sco3.2v5*) # On SCO OpenServer 5, we need -belf to get full-featured binaries. SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" { echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6; } if test "${lt_cv_cc_needs_belf+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && $as_test_x conftest$ac_exeext; then lt_cv_cc_needs_belf=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 lt_cv_cc_needs_belf=no fi rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu fi { echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6; } if test x"$lt_cv_cc_needs_belf" != x"yes"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf CFLAGS="$SAVE_CFLAGS" fi ;; sparc*-*solaris*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then case `/usr/bin/file conftest.o` in *64-bit*) case $lt_cv_prog_gnu_ld in yes*) LD="${LD-ld} -m elf64_sparc" ;; *) if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then LD="${LD-ld} -64" fi ;; esac ;; esac fi rm -rf conftest* ;; esac need_locks="$enable_libtool_lock" ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; } # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= fi if test -z "$CPP"; then if test "${ac_cv_prog_CPP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else # Double quotes because CPP needs to be expanded for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" do ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then : else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 # Broken: fails on valid input. continue fi rm -f conftest.err conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then # Broken: success on invalid input. continue else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.err conftest.$ac_ext if $ac_preproc_ok; then break fi done ac_cv_prog_CPP=$CPP fi CPP=$ac_cv_prog_CPP else ac_cv_prog_CPP=$CPP fi { echo "$as_me:$LINENO: result: $CPP" >&5 echo "${ECHO_T}$CPP" >&6; } ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then : else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 # Broken: fails on valid input. continue fi rm -f conftest.err conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then # Broken: success on invalid input. continue else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.err conftest.$ac_ext if $ac_preproc_ok; then : else { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check See \`config.log' for more details." >&5 echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { echo "$as_me:$LINENO: checking for ANSI C header files" >&5 echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; } if test "${ac_cv_header_stdc+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include #include #include int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_header_stdc=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_header_stdc=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "memchr" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "free" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. if test "$cross_compiling" = yes; then : else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include #if ((' ' & 0x0FF) == 0x020) # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) #else # define ISLOWER(c) \ (('a' <= (c) && (c) <= 'i') \ || ('j' <= (c) && (c) <= 'r') \ || ('s' <= (c) && (c) <= 'z')) # define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) #endif #define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) int main () { int i; for (i = 0; i < 256; i++) if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) return 2; return 0; } _ACEOF rm -f conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_link") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' { (case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then : else echo "$as_me: program exited with status $ac_status" >&5 echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ( exit $ac_status ) ac_cv_header_stdc=no fi rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi fi fi { echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 echo "${ECHO_T}$ac_cv_header_stdc" >&6; } if test $ac_cv_header_stdc = yes; then cat >>confdefs.h <<\_ACEOF #define STDC_HEADERS 1 _ACEOF fi # On IRIX 5.3, sys/types and inttypes.h are conflicting. for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ inttypes.h stdint.h unistd.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` { echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then eval "$as_ac_Header=yes" else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 eval "$as_ac_Header=no" fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi ac_res=`eval echo '${'$as_ac_Header'}'` { echo "$as_me:$LINENO: result: $ac_res" >&5 echo "${ECHO_T}$ac_res" >&6; } if test `eval echo '${'$as_ac_Header'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done for ac_header in dlfcn.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then { echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 fi ac_res=`eval echo '${'$as_ac_Header'}'` { echo "$as_me:$LINENO: result: $ac_res" >&5 echo "${ECHO_T}$ac_res" >&6; } else # Is the header compilable? { echo "$as_me:$LINENO: checking $ac_header usability" >&5 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext { echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 echo "${ECHO_T}$ac_header_compiler" >&6; } # Is the header present? { echo "$as_me:$LINENO: checking $ac_header presence" >&5 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <$ac_header> _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext { echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 echo "${ECHO_T}$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in yes:no: ) { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} ac_header_preproc=yes ;; no:yes:* ) { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} ( cat <<\_ASBOX ## ---------------------------- ## ## Report this to zany@triq.net ## ## ---------------------------- ## _ASBOX ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac { echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 else eval "$as_ac_Header=\$ac_header_preproc" fi ac_res=`eval echo '${'$as_ac_Header'}'` { echo "$as_me:$LINENO: result: $ac_res" >&5 echo "${ECHO_T}$ac_res" >&6; } fi if test `eval echo '${'$as_ac_Header'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done ac_ext=cpp ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu if test -z "$CXX"; then if test -n "$CCC"; then CXX=$CCC else if test -n "$ac_tool_prefix"; then for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_CXX+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$CXX"; then ac_cv_prog_CXX="$CXX" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CXX="$ac_tool_prefix$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CXX=$ac_cv_prog_CXX if test -n "$CXX"; then { echo "$as_me:$LINENO: result: $CXX" >&5 echo "${ECHO_T}$CXX" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi test -n "$CXX" && break done fi if test -z "$CXX"; then ac_ct_CXX=$CXX for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_ct_CXX"; then ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CXX="$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CXX=$ac_cv_prog_ac_ct_CXX if test -n "$ac_ct_CXX"; then { echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5 echo "${ECHO_T}$ac_ct_CXX" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi test -n "$ac_ct_CXX" && break done if test "x$ac_ct_CXX" = x; then CXX="g++" else case $cross_compiling:$ac_tool_warned in yes:) { echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&5 echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&2;} ac_tool_warned=yes ;; esac CXX=$ac_ct_CXX fi fi fi fi # Provide some information about the compiler. echo "$as_me:$LINENO: checking for C++ compiler version" >&5 ac_compiler=`set X $ac_compile; echo $2` { (ac_try="$ac_compiler --version >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compiler --version >&5") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } { (ac_try="$ac_compiler -v >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compiler -v >&5") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } { (ac_try="$ac_compiler -V >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compiler -V >&5") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } { echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5 echo $ECHO_N "checking whether we are using the GNU C++ compiler... $ECHO_C" >&6; } if test "${ac_cv_cxx_compiler_gnu+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { #ifndef __GNUC__ choke me #endif ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_compiler_gnu=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_compiler_gnu=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_cxx_compiler_gnu=$ac_compiler_gnu fi { echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5 echo "${ECHO_T}$ac_cv_cxx_compiler_gnu" >&6; } GXX=`test $ac_compiler_gnu = yes && echo yes` ac_test_CXXFLAGS=${CXXFLAGS+set} ac_save_CXXFLAGS=$CXXFLAGS { echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5 echo $ECHO_N "checking whether $CXX accepts -g... $ECHO_C" >&6; } if test "${ac_cv_prog_cxx_g+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_save_cxx_werror_flag=$ac_cxx_werror_flag ac_cxx_werror_flag=yes ac_cv_prog_cxx_g=no CXXFLAGS="-g" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_prog_cxx_g=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 CXXFLAGS="" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then : else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cxx_werror_flag=$ac_save_cxx_werror_flag CXXFLAGS="-g" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_prog_cxx_g=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cxx_werror_flag=$ac_save_cxx_werror_flag fi { echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5 echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6; } if test "$ac_test_CXXFLAGS" = set; then CXXFLAGS=$ac_save_CXXFLAGS elif test $ac_cv_prog_cxx_g = yes; then if test "$GXX" = yes; then CXXFLAGS="-g -O2" else CXXFLAGS="-g" fi else if test "$GXX" = yes; then CXXFLAGS="-O2" else CXXFLAGS= fi fi ac_ext=cpp ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu depcc="$CXX" am_compiler_list= { echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; } if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named `D' -- because `-MD' means `put the output # in D'. mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_CXX_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` fi for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with # Solaris 8's {/usr,}/bin/sh. touch sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf case $depmode in nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; none) break ;; esac # We check with `-c' and `-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle `-M -o', and we need to detect this. if depmode=$depmode \ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_CXX_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_CXX_dependencies_compiler_type=none fi fi { echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5 echo "${ECHO_T}$am_cv_CXX_dependencies_compiler_type" >&6; } CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type if test "x$enable_dependency_tracking" != xno \ && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then am__fastdepCXX_TRUE= am__fastdepCXX_FALSE='#' else am__fastdepCXX_TRUE='#' am__fastdepCXX_FALSE= fi if test -n "$CXX" && ( test "X$CXX" != "Xno" && ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || (test "X$CXX" != "Xg++"))) ; then ac_ext=cpp ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu { echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5 echo $ECHO_N "checking how to run the C++ preprocessor... $ECHO_C" >&6; } if test -z "$CXXCPP"; then if test "${ac_cv_prog_CXXCPP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else # Double quotes because CXXCPP needs to be expanded for CXXCPP in "$CXX -E" "/lib/cpp" do ac_preproc_ok=false for ac_cxx_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || test ! -s conftest.err }; then : else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 # Broken: fails on valid input. continue fi rm -f conftest.err conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || test ! -s conftest.err }; then # Broken: success on invalid input. continue else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.err conftest.$ac_ext if $ac_preproc_ok; then break fi done ac_cv_prog_CXXCPP=$CXXCPP fi CXXCPP=$ac_cv_prog_CXXCPP else ac_cv_prog_CXXCPP=$CXXCPP fi { echo "$as_me:$LINENO: result: $CXXCPP" >&5 echo "${ECHO_T}$CXXCPP" >&6; } ac_preproc_ok=false for ac_cxx_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || test ! -s conftest.err }; then : else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 # Broken: fails on valid input. continue fi rm -f conftest.err conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || test ! -s conftest.err }; then # Broken: success on invalid input. continue else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.err conftest.$ac_ext if $ac_preproc_ok; then : else { { echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check See \`config.log' for more details." >&5 echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } fi ac_ext=cpp ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu fi ac_ext=f ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5' ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_f77_compiler_gnu if test -n "$ac_tool_prefix"; then for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgf95 lf95 ftn do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_F77+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$F77"; then ac_cv_prog_F77="$F77" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_F77="$ac_tool_prefix$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi F77=$ac_cv_prog_F77 if test -n "$F77"; then { echo "$as_me:$LINENO: result: $F77" >&5 echo "${ECHO_T}$F77" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi test -n "$F77" && break done fi if test -z "$F77"; then ac_ct_F77=$F77 for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgf95 lf95 ftn do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_F77+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_ct_F77"; then ac_cv_prog_ac_ct_F77="$ac_ct_F77" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_F77="$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_F77=$ac_cv_prog_ac_ct_F77 if test -n "$ac_ct_F77"; then { echo "$as_me:$LINENO: result: $ac_ct_F77" >&5 echo "${ECHO_T}$ac_ct_F77" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi test -n "$ac_ct_F77" && break done if test "x$ac_ct_F77" = x; then F77="" else case $cross_compiling:$ac_tool_warned in yes:) { echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&5 echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&2;} ac_tool_warned=yes ;; esac F77=$ac_ct_F77 fi fi # Provide some information about the compiler. echo "$as_me:$LINENO: checking for Fortran 77 compiler version" >&5 ac_compiler=`set X $ac_compile; echo $2` { (ac_try="$ac_compiler --version >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compiler --version >&5") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } { (ac_try="$ac_compiler -v >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compiler -v >&5") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } { (ac_try="$ac_compiler -V >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compiler -V >&5") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } rm -f a.out # If we don't use `.F' as extension, the preprocessor is not run on the # input file. (Note that this only needs to work for GNU compilers.) ac_save_ext=$ac_ext ac_ext=F { echo "$as_me:$LINENO: checking whether we are using the GNU Fortran 77 compiler" >&5 echo $ECHO_N "checking whether we are using the GNU Fortran 77 compiler... $ECHO_C" >&6; } if test "${ac_cv_f77_compiler_gnu+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF program main #ifndef __GNUC__ choke me #endif end _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_f77_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_compiler_gnu=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_compiler_gnu=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_f77_compiler_gnu=$ac_compiler_gnu fi { echo "$as_me:$LINENO: result: $ac_cv_f77_compiler_gnu" >&5 echo "${ECHO_T}$ac_cv_f77_compiler_gnu" >&6; } ac_ext=$ac_save_ext ac_test_FFLAGS=${FFLAGS+set} ac_save_FFLAGS=$FFLAGS FFLAGS= { echo "$as_me:$LINENO: checking whether $F77 accepts -g" >&5 echo $ECHO_N "checking whether $F77 accepts -g... $ECHO_C" >&6; } if test "${ac_cv_prog_f77_g+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else FFLAGS=-g cat >conftest.$ac_ext <<_ACEOF program main end _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_f77_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_prog_f77_g=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_prog_f77_g=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { echo "$as_me:$LINENO: result: $ac_cv_prog_f77_g" >&5 echo "${ECHO_T}$ac_cv_prog_f77_g" >&6; } if test "$ac_test_FFLAGS" = set; then FFLAGS=$ac_save_FFLAGS elif test $ac_cv_prog_f77_g = yes; then if test "x$ac_cv_f77_compiler_gnu" = xyes; then FFLAGS="-g -O2" else FFLAGS="-g" fi else if test "x$ac_cv_f77_compiler_gnu" = xyes; then FFLAGS="-O2" else FFLAGS= fi fi G77=`test $ac_compiler_gnu = yes && echo yes` ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu # Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! # find the maximum length of command line arguments { echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5 echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6; } if test "${lt_cv_sys_max_cmd_len+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else i=0 teststring="ABCD" case $build_os in msdosdjgpp*) # On DJGPP, this test can blow up pretty badly due to problems in libc # (any single argument exceeding 2000 bytes causes a buffer overrun # during glob expansion). Even if it were fixed, the result of this # check would be larger than it should be. lt_cv_sys_max_cmd_len=12288; # 12K is about right ;; gnu*) # Under GNU Hurd, this test is not required because there is # no limit to the length of command line arguments. # Libtool will interpret -1 as no limit whatsoever lt_cv_sys_max_cmd_len=-1; ;; cygwin* | mingw*) # On Win9x/ME, this test blows up -- it succeeds, but takes # about 5 minutes as the teststring grows exponentially. # Worse, since 9x/ME are not pre-emptively multitasking, # you end up with a "frozen" computer, even though with patience # the test eventually succeeds (with a max line length of 256k). # Instead, let's just punt: use the minimum linelength reported by # all of the supported platforms: 8192 (on NT/2K/XP). lt_cv_sys_max_cmd_len=8192; ;; amigaos*) # On AmigaOS with pdksh, this test takes hours, literally. # So we just punt and use a minimum line length of 8192. lt_cv_sys_max_cmd_len=8192; ;; netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) # This has been around since 386BSD, at least. Likely further. if test -x /sbin/sysctl; then lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` elif test -x /usr/sbin/sysctl; then lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` else lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs fi # And add a safety zone lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ;; interix*) # We know the value 262144 and hardcode it with a safety zone (like BSD) lt_cv_sys_max_cmd_len=196608 ;; osf*) # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not # nice to cause kernel panics so lets avoid the loop below. # First set a reasonable default. lt_cv_sys_max_cmd_len=16384 # if test -x /sbin/sysconfig; then case `/sbin/sysconfig -q proc exec_disable_arg_limit` in *1*) lt_cv_sys_max_cmd_len=-1 ;; esac fi ;; sco3.2v5*) lt_cv_sys_max_cmd_len=102400 ;; sysv5* | sco5v6* | sysv4.2uw2*) kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` if test -n "$kargmax"; then lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` else lt_cv_sys_max_cmd_len=32768 fi ;; *) lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` if test -n "$lt_cv_sys_max_cmd_len"; then lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` else SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} while (test "X"`$SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \ = "XX$teststring") >/dev/null 2>&1 && new_result=`expr "X$teststring" : ".*" 2>&1` && lt_cv_sys_max_cmd_len=$new_result && test $i != 17 # 1/2 MB should be enough do i=`expr $i + 1` teststring=$teststring$teststring done teststring= # Add a significant safety factor because C++ compilers can tack on massive # amounts of additional arguments before passing them to the linker. # It appears as though 1/2 is a usable value. lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` fi ;; esac fi if test -n $lt_cv_sys_max_cmd_len ; then { echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5 echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6; } else { echo "$as_me:$LINENO: result: none" >&5 echo "${ECHO_T}none" >&6; } fi # Check for command to grab the raw symbol name followed by C symbol from nm. { echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5 echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6; } if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else # These are sane defaults that work on at least a few old systems. # [They come from Ultrix. What could be older than Ultrix?!! ;)] # Character class describing NM global symbol codes. symcode='[BCDEGRST]' # Regexp to match symbols that can be accessed directly from C. sympat='\([_A-Za-z][_A-Za-z0-9]*\)' # Transform an extracted symbol line into a proper C declaration lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'" # Transform an extracted symbol line into symbol name and symbol address lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" # Define system-specific variables. case $host_os in aix*) symcode='[BCDT]' ;; cygwin* | mingw* | pw32*) symcode='[ABCDGISTW]' ;; hpux*) # Its linker distinguishes data from code symbols if test "$host_cpu" = ia64; then symcode='[ABCDEGRST]' fi lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" ;; linux* | k*bsd*-gnu) if test "$host_cpu" = ia64; then symcode='[ABCDGIRSTW]' lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" fi ;; irix* | nonstopux*) symcode='[BCDEGRST]' ;; osf*) symcode='[BCDEGQRST]' ;; solaris*) symcode='[BDRT]' ;; sco3.2v5*) symcode='[DT]' ;; sysv4.2uw2*) symcode='[DT]' ;; sysv5* | sco5v6* | unixware* | OpenUNIX*) symcode='[ABDT]' ;; sysv4) symcode='[DFNSTU]' ;; esac # Handle CRLF in mingw tool chain opt_cr= case $build_os in mingw*) opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp ;; esac # If we're using GNU nm, then use its standard symbol codes. case `$NM -V 2>&1` in *GNU* | *'with BFD'*) symcode='[ABCDGIRSTW]' ;; esac # Try without a prefix undercore, then with it. for ac_symprfx in "" "_"; do # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. symxfrm="\\1 $ac_symprfx\\2 \\2" # Write the raw and C identifiers. lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" # Check to see that the pipe works correctly. pipe_works=no rm -f conftest* cat > conftest.$ac_ext <&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then # Now try to grab the symbols. nlist=conftest.nm if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5 (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && test -s "$nlist"; then # Try sorting and uniquifying the output. if sort "$nlist" | uniq > "$nlist"T; then mv -f "$nlist"T "$nlist" else rm -f "$nlist"T fi # Make sure that we snagged all the symbols we need. if grep ' nm_test_var$' "$nlist" >/dev/null; then if grep ' nm_test_func$' "$nlist" >/dev/null; then cat < conftest.$ac_ext #ifdef __cplusplus extern "C" { #endif EOF # Now generate the symbol file. eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext' cat <> conftest.$ac_ext #if defined (__STDC__) && __STDC__ # define lt_ptr_t void * #else # define lt_ptr_t char * # define const #endif /* The mapping between symbol names and symbols. */ const struct { const char *name; lt_ptr_t address; } lt_preloaded_symbols[] = { EOF $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext cat <<\EOF >> conftest.$ac_ext {0, (lt_ptr_t) 0} }; #ifdef __cplusplus } #endif EOF # Now try linking the two files. mv conftest.$ac_objext conftstm.$ac_objext lt_save_LIBS="$LIBS" lt_save_CFLAGS="$CFLAGS" LIBS="conftstm.$ac_objext" CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && test -s conftest${ac_exeext}; then pipe_works=yes fi LIBS="$lt_save_LIBS" CFLAGS="$lt_save_CFLAGS" else echo "cannot find nm_test_func in $nlist" >&5 fi else echo "cannot find nm_test_var in $nlist" >&5 fi else echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 fi else echo "$progname: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -rf conftest* conftst* # Do not use the global_symbol_pipe unless it works. if test "$pipe_works" = yes; then break else lt_cv_sys_global_symbol_pipe= fi done fi if test -z "$lt_cv_sys_global_symbol_pipe"; then lt_cv_sys_global_symbol_to_cdecl= fi if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then { echo "$as_me:$LINENO: result: failed" >&5 echo "${ECHO_T}failed" >&6; } else { echo "$as_me:$LINENO: result: ok" >&5 echo "${ECHO_T}ok" >&6; } fi { echo "$as_me:$LINENO: checking for objdir" >&5 echo $ECHO_N "checking for objdir... $ECHO_C" >&6; } if test "${lt_cv_objdir+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else rm -f .libs 2>/dev/null mkdir .libs 2>/dev/null if test -d .libs; then lt_cv_objdir=.libs else # MS-DOS does not allow filenames that begin with a dot. lt_cv_objdir=_libs fi rmdir .libs 2>/dev/null fi { echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5 echo "${ECHO_T}$lt_cv_objdir" >&6; } objdir=$lt_cv_objdir case $host_os in aix3*) # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi ;; esac # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. Xsed='sed -e 1s/^X//' sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g' # Same as above, but do not quote variable references. double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g' # Sed substitution to delay expansion of an escaped shell variable in a # double_quote_subst'ed string. delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' # Sed substitution to avoid accidental globbing in evaled expressions no_glob_subst='s/\*/\\\*/g' # Constants: rm="rm -f" # Global variables: default_ofile=libtool can_build_shared=yes # All known linkers require a `.a' archive for static linking (except MSVC, # which needs '.lib'). libext=a ltmain="$ac_aux_dir/ltmain.sh" ofile="$default_ofile" with_gnu_ld="$lt_cv_prog_gnu_ld" if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. set dummy ${ac_tool_prefix}ar; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_AR+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$AR"; then ac_cv_prog_AR="$AR" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_AR="${ac_tool_prefix}ar" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi AR=$ac_cv_prog_AR if test -n "$AR"; then { echo "$as_me:$LINENO: result: $AR" >&5 echo "${ECHO_T}$AR" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi fi if test -z "$ac_cv_prog_AR"; then ac_ct_AR=$AR # Extract the first word of "ar", so it can be a program name with args. set dummy ar; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_AR+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_ct_AR"; then ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_AR="ar" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_AR=$ac_cv_prog_ac_ct_AR if test -n "$ac_ct_AR"; then { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 echo "${ECHO_T}$ac_ct_AR" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi if test "x$ac_ct_AR" = x; then AR="false" else case $cross_compiling:$ac_tool_warned in yes:) { echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&5 echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&2;} ac_tool_warned=yes ;; esac AR=$ac_ct_AR fi else AR="$ac_cv_prog_AR" fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. set dummy ${ac_tool_prefix}ranlib; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_RANLIB+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$RANLIB"; then ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi RANLIB=$ac_cv_prog_RANLIB if test -n "$RANLIB"; then { echo "$as_me:$LINENO: result: $RANLIB" >&5 echo "${ECHO_T}$RANLIB" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi fi if test -z "$ac_cv_prog_RANLIB"; then ac_ct_RANLIB=$RANLIB # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_ct_RANLIB"; then ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_RANLIB="ranlib" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB if test -n "$ac_ct_RANLIB"; then { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 echo "${ECHO_T}$ac_ct_RANLIB" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi if test "x$ac_ct_RANLIB" = x; then RANLIB=":" else case $cross_compiling:$ac_tool_warned in yes:) { echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&5 echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&2;} ac_tool_warned=yes ;; esac RANLIB=$ac_ct_RANLIB fi else RANLIB="$ac_cv_prog_RANLIB" fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_STRIP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then { echo "$as_me:$LINENO: result: $STRIP" >&5 echo "${ECHO_T}$STRIP" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi fi if test -z "$ac_cv_prog_STRIP"; then ac_ct_STRIP=$STRIP # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_ct_STRIP"; then ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_STRIP="strip" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 echo "${ECHO_T}$ac_ct_STRIP" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi if test "x$ac_ct_STRIP" = x; then STRIP=":" else case $cross_compiling:$ac_tool_warned in yes:) { echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&5 echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&2;} ac_tool_warned=yes ;; esac STRIP=$ac_ct_STRIP fi else STRIP="$ac_cv_prog_STRIP" fi old_CC="$CC" old_CFLAGS="$CFLAGS" # Set sane defaults for various variables test -z "$AR" && AR=ar test -z "$AR_FLAGS" && AR_FLAGS=cru test -z "$AS" && AS=as test -z "$CC" && CC=cc test -z "$LTCC" && LTCC=$CC test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS test -z "$DLLTOOL" && DLLTOOL=dlltool test -z "$LD" && LD=ld test -z "$LN_S" && LN_S="ln -s" test -z "$MAGIC_CMD" && MAGIC_CMD=file test -z "$NM" && NM=nm test -z "$SED" && SED=sed test -z "$OBJDUMP" && OBJDUMP=objdump test -z "$RANLIB" && RANLIB=: test -z "$STRIP" && STRIP=: test -z "$ac_objext" && ac_objext=o # Determine commands to create old-style static archives. old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' old_postinstall_cmds='chmod 644 $oldlib' old_postuninstall_cmds= if test -n "$RANLIB"; then case $host_os in openbsd*) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" ;; *) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" ;; esac old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" fi for cc_temp in $compiler""; do case $cc_temp in compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; \-*) ;; *) break;; esac done cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` # Only perform the check for file, if the check method requires it case $deplibs_check_method in file_magic*) if test "$file_magic_cmd" = '$MAGIC_CMD'; then { echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6; } if test "${lt_cv_path_MAGIC_CMD+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else case $MAGIC_CMD in [\\/*] | ?:[\\/]*) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ;; *) lt_save_MAGIC_CMD="$MAGIC_CMD" lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" for ac_dir in $ac_dummy; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/${ac_tool_prefix}file; then lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then : else cat <&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org EOF fi ;; esac fi break fi done IFS="$lt_save_ifs" MAGIC_CMD="$lt_save_MAGIC_CMD" ;; esac fi MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 echo "${ECHO_T}$MAGIC_CMD" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi if test -z "$lt_cv_path_MAGIC_CMD"; then if test -n "$ac_tool_prefix"; then { echo "$as_me:$LINENO: checking for file" >&5 echo $ECHO_N "checking for file... $ECHO_C" >&6; } if test "${lt_cv_path_MAGIC_CMD+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else case $MAGIC_CMD in [\\/*] | ?:[\\/]*) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ;; *) lt_save_MAGIC_CMD="$MAGIC_CMD" lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" for ac_dir in $ac_dummy; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/file; then lt_cv_path_MAGIC_CMD="$ac_dir/file" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then : else cat <&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org EOF fi ;; esac fi break fi done IFS="$lt_save_ifs" MAGIC_CMD="$lt_save_MAGIC_CMD" ;; esac fi MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 echo "${ECHO_T}$MAGIC_CMD" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi else MAGIC_CMD=: fi fi fi ;; esac case $host_os in rhapsody* | darwin*) if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_DSYMUTIL+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$DSYMUTIL"; then ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi DSYMUTIL=$ac_cv_prog_DSYMUTIL if test -n "$DSYMUTIL"; then { echo "$as_me:$LINENO: result: $DSYMUTIL" >&5 echo "${ECHO_T}$DSYMUTIL" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi fi if test -z "$ac_cv_prog_DSYMUTIL"; then ac_ct_DSYMUTIL=$DSYMUTIL # Extract the first word of "dsymutil", so it can be a program name with args. set dummy dsymutil; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_ct_DSYMUTIL"; then ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL if test -n "$ac_ct_DSYMUTIL"; then { echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5 echo "${ECHO_T}$ac_ct_DSYMUTIL" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi if test "x$ac_ct_DSYMUTIL" = x; then DSYMUTIL=":" else case $cross_compiling:$ac_tool_warned in yes:) { echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&5 echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&2;} ac_tool_warned=yes ;; esac DSYMUTIL=$ac_ct_DSYMUTIL fi else DSYMUTIL="$ac_cv_prog_DSYMUTIL" fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. set dummy ${ac_tool_prefix}nmedit; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_NMEDIT+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$NMEDIT"; then ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi NMEDIT=$ac_cv_prog_NMEDIT if test -n "$NMEDIT"; then { echo "$as_me:$LINENO: result: $NMEDIT" >&5 echo "${ECHO_T}$NMEDIT" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi fi if test -z "$ac_cv_prog_NMEDIT"; then ac_ct_NMEDIT=$NMEDIT # Extract the first word of "nmedit", so it can be a program name with args. set dummy nmedit; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_ct_NMEDIT"; then ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_NMEDIT="nmedit" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT if test -n "$ac_ct_NMEDIT"; then { echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5 echo "${ECHO_T}$ac_ct_NMEDIT" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi if test "x$ac_ct_NMEDIT" = x; then NMEDIT=":" else case $cross_compiling:$ac_tool_warned in yes:) { echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&5 echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&2;} ac_tool_warned=yes ;; esac NMEDIT=$ac_ct_NMEDIT fi else NMEDIT="$ac_cv_prog_NMEDIT" fi { echo "$as_me:$LINENO: checking for -single_module linker flag" >&5 echo $ECHO_N "checking for -single_module linker flag... $ECHO_C" >&6; } if test "${lt_cv_apple_cc_single_mod+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_apple_cc_single_mod=no if test -z "${LT_MULTI_MODULE}"; then # By default we will add the -single_module flag. You can override # by either setting the environment variable LT_MULTI_MODULE # non-empty at configure time, or by adding -multi_module to the # link flags. echo "int foo(void){return 1;}" > conftest.c $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ -dynamiclib ${wl}-single_module conftest.c if test -f libconftest.dylib; then lt_cv_apple_cc_single_mod=yes rm -rf libconftest.dylib* fi rm conftest.c fi fi { echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5 echo "${ECHO_T}$lt_cv_apple_cc_single_mod" >&6; } { echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5 echo $ECHO_N "checking for -exported_symbols_list linker flag... $ECHO_C" >&6; } if test "${lt_cv_ld_exported_symbols_list+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_ld_exported_symbols_list=no save_LDFLAGS=$LDFLAGS echo "_main" > conftest.sym LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && $as_test_x conftest$ac_exeext; then lt_cv_ld_exported_symbols_list=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 lt_cv_ld_exported_symbols_list=no fi rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LDFLAGS="$save_LDFLAGS" fi { echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5 echo "${ECHO_T}$lt_cv_ld_exported_symbols_list" >&6; } case $host_os in rhapsody* | darwin1.[0123]) _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; darwin1.*) _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; darwin*) # if running on 10.5 or later, the deployment target defaults # to the OS version, if on x86, and 10.4, the deployment # target defaults to 10.4. Don't you love it? case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in 10.0,*86*-darwin8*|10.0,*-darwin[91]*) _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; 10.[012]*) _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; 10.*) _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; esac ;; esac if test "$lt_cv_apple_cc_single_mod" = "yes"; then _lt_dar_single_mod='$single_module' fi if test "$lt_cv_ld_exported_symbols_list" = "yes"; then _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' else _lt_dar_export_syms="~$NMEDIT -s \$output_objdir/\${libname}-symbols.expsym \${lib}" fi if test "$DSYMUTIL" != ":"; then _lt_dsymutil="~$DSYMUTIL \$lib || :" else _lt_dsymutil= fi ;; esac enable_dlopen=no enable_win32_dll=no # Check whether --enable-libtool-lock was given. if test "${enable_libtool_lock+set}" = set; then enableval=$enable_libtool_lock; fi test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes # Check whether --with-pic was given. if test "${with_pic+set}" = set; then withval=$with_pic; pic_mode="$withval" else pic_mode=default fi test -z "$pic_mode" && pic_mode=default # Use C for the default configuration in the libtool script tagname= lt_save_CC="$CC" ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu # Source file extension for C test sources. ac_ext=c # Object file extension for compiled C test sources. objext=o objext=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;" # Code to be used in simple link tests lt_simple_link_test_code='int main(){return(0);}' # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} # If no C compiler flags were specified, use CFLAGS. LTCFLAGS=${LTCFLAGS-"$CFLAGS"} # Allow CC to be a program name with arguments. compiler=$CC # save warnings/boilerplate of simple test code ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" >conftest.$ac_ext eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_compiler_boilerplate=`cat conftest.err` $rm conftest* ac_outfile=conftest.$ac_objext echo "$lt_simple_link_test_code" >conftest.$ac_ext eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_linker_boilerplate=`cat conftest.err` $rm -r conftest* lt_prog_compiler_no_builtin_flag= if test "$GCC" = yes; then lt_prog_compiler_no_builtin_flag=' -fno-builtin' { echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; } if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_prog_compiler_rtti_exceptions=no ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-fno-rtti -fno-exceptions" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:8381: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 echo "$as_me:8385: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_rtti_exceptions=yes fi fi $rm conftest* fi { echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; } if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" else : fi fi lt_prog_compiler_wl= lt_prog_compiler_pic= lt_prog_compiler_static= { echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; } if test "$GCC" = yes; then lt_prog_compiler_wl='-Wl,' lt_prog_compiler_static='-static' case $host_os in aix*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor lt_prog_compiler_static='-Bstatic' fi ;; amigaos*) # FIXME: we need at least 68020 code to build shared libraries, but # adding the `-m68020' flag to GCC prevents building anything better, # like `-m68040'. lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' ;; beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; mingw* | cygwin* | pw32* | os2*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries lt_prog_compiler_pic='-DDLL_EXPORT' ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files lt_prog_compiler_pic='-fno-common' ;; interix[3-9]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. # Instead, we relocate shared libraries at runtime. ;; msdosdjgpp*) # Just because we use GCC doesn't mean we suddenly get shared libraries # on systems that don't support them. lt_prog_compiler_can_build_shared=no enable_shared=no ;; sysv4*MP*) if test -d /usr/nec; then lt_prog_compiler_pic=-Kconform_pic fi ;; hpux*) # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) lt_prog_compiler_pic='-fPIC' ;; esac ;; *) lt_prog_compiler_pic='-fPIC' ;; esac else # PORTME Check for flag to pass linker flags through the system compiler. case $host_os in aix*) lt_prog_compiler_wl='-Wl,' if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor lt_prog_compiler_static='-Bstatic' else lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' fi ;; darwin*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files case $cc_basename in xlc*) lt_prog_compiler_pic='-qnocommon' lt_prog_compiler_wl='-Wl,' ;; esac ;; mingw* | cygwin* | pw32* | os2*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). lt_prog_compiler_pic='-DDLL_EXPORT' ;; hpux9* | hpux10* | hpux11*) lt_prog_compiler_wl='-Wl,' # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) lt_prog_compiler_pic='+Z' ;; esac # Is there a better lt_prog_compiler_static that works with the bundled CC? lt_prog_compiler_static='${wl}-a ${wl}archive' ;; irix5* | irix6* | nonstopux*) lt_prog_compiler_wl='-Wl,' # PIC (with -KPIC) is the default. lt_prog_compiler_static='-non_shared' ;; newsos6) lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' ;; linux* | k*bsd*-gnu) case $cc_basename in icc* | ecc*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-static' ;; pgcc* | pgf77* | pgf90* | pgf95*) # Portland Group compilers (*not* the Pentium gcc compiler, # which looks to be a dead project) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-fpic' lt_prog_compiler_static='-Bstatic' ;; ccc*) lt_prog_compiler_wl='-Wl,' # All Alpha code is PIC. lt_prog_compiler_static='-non_shared' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' lt_prog_compiler_wl='-Wl,' ;; *Sun\ F*) # Sun Fortran 8.3 passes all unrecognized flags to the linker lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' lt_prog_compiler_wl='' ;; esac ;; esac ;; osf3* | osf4* | osf5*) lt_prog_compiler_wl='-Wl,' # All OSF/1 code is PIC. lt_prog_compiler_static='-non_shared' ;; rdos*) lt_prog_compiler_static='-non_shared' ;; solaris*) lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' case $cc_basename in f77* | f90* | f95*) lt_prog_compiler_wl='-Qoption ld ';; *) lt_prog_compiler_wl='-Wl,';; esac ;; sunos4*) lt_prog_compiler_wl='-Qoption ld ' lt_prog_compiler_pic='-PIC' lt_prog_compiler_static='-Bstatic' ;; sysv4 | sysv4.2uw2* | sysv4.3*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' ;; sysv4*MP*) if test -d /usr/nec ;then lt_prog_compiler_pic='-Kconform_pic' lt_prog_compiler_static='-Bstatic' fi ;; sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' ;; unicos*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_can_build_shared=no ;; uts4*) lt_prog_compiler_pic='-pic' lt_prog_compiler_static='-Bstatic' ;; *) lt_prog_compiler_can_build_shared=no ;; esac fi { echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5 echo "${ECHO_T}$lt_prog_compiler_pic" >&6; } # # Check to make sure the PIC flag actually works. # if test -n "$lt_prog_compiler_pic"; then { echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6; } if test "${lt_cv_prog_compiler_pic_works+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_prog_compiler_pic_works=no ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="$lt_prog_compiler_pic -DPIC" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:8671: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 echo "$as_me:8675: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_pic_works=yes fi fi $rm conftest* fi { echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5 echo "${ECHO_T}$lt_cv_prog_compiler_pic_works" >&6; } if test x"$lt_cv_prog_compiler_pic_works" = xyes; then case $lt_prog_compiler_pic in "" | " "*) ;; *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; esac else lt_prog_compiler_pic= lt_prog_compiler_can_build_shared=no fi fi case $host_os in # For platforms which do not support PIC, -DPIC is meaningless: *djgpp*) lt_prog_compiler_pic= ;; *) lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" ;; esac # # Check to make sure the static flag actually works. # wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" { echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; } if test "${lt_cv_prog_compiler_static_works+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_prog_compiler_static_works=no save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS $lt_tmp_static_flag" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then # The linker can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&5 $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_static_works=yes fi else lt_cv_prog_compiler_static_works=yes fi fi $rm -r conftest* LDFLAGS="$save_LDFLAGS" fi { echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5 echo "${ECHO_T}$lt_cv_prog_compiler_static_works" >&6; } if test x"$lt_cv_prog_compiler_static_works" = xyes; then : else lt_prog_compiler_static= fi { echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } if test "${lt_cv_prog_compiler_c_o+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_prog_compiler_c_o=no $rm -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:8775: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 echo "$as_me:8779: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o=yes fi fi chmod u+w . 2>&5 $rm conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files $rm out/* && rmdir out cd .. rmdir conftest $rm conftest* fi { echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; } hard_links="nottested" if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then # do not overwrite the value of need_locks provided by the user { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; } hard_links=yes $rm conftest* ln conftest.a conftest.b 2>/dev/null && hard_links=no touch conftest.a ln conftest.a conftest.b 2>&5 || hard_links=no ln conftest.a conftest.b 2>/dev/null && hard_links=no { echo "$as_me:$LINENO: result: $hard_links" >&5 echo "${ECHO_T}$hard_links" >&6; } if test "$hard_links" = no; then { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} need_locks=warn fi else need_locks=no fi { echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; } runpath_var= allow_undefined_flag= enable_shared_with_static_runtimes=no archive_cmds= archive_expsym_cmds= old_archive_From_new_cmds= old_archive_from_expsyms_cmds= export_dynamic_flag_spec= whole_archive_flag_spec= thread_safe_flag_spec= hardcode_libdir_flag_spec= hardcode_libdir_flag_spec_ld= hardcode_libdir_separator= hardcode_direct=no hardcode_minus_L=no hardcode_shlibpath_var=unsupported link_all_deplibs=unknown hardcode_automatic=no module_cmds= module_expsym_cmds= always_export_symbols=no export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' # include_expsyms should be a list of space-separated symbols to be *always* # included in the symbol list include_expsyms= # exclude_expsyms can be an extended regexp of symbols to exclude # it will be wrapped by ` (' and `)$', so one must not match beginning or # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', # as well as any symbol that contains `d'. exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out # platforms (ab)use it in PIC code, but their linkers get confused if # the symbol is explicitly referenced. Since portable code cannot # rely on this symbol name, it's probably fine to never include it in # preloaded symbol tables. # Exclude shared library initialization/finalization symbols. extract_expsyms_cmds= # Just being paranoid about ensuring that cc_basename is set. for cc_temp in $compiler""; do case $cc_temp in compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; \-*) ;; *) break;; esac done cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` case $host_os in cygwin* | mingw* | pw32*) # FIXME: the MSVC++ port hasn't been tested in a loooong time # When not using gcc, we currently assume that we are using # Microsoft Visual C++. if test "$GCC" != yes; then with_gnu_ld=no fi ;; interix*) # we just hope/assume this is gcc and not c89 (= MSVC++) with_gnu_ld=yes ;; openbsd*) with_gnu_ld=no ;; esac ld_shlibs=yes if test "$with_gnu_ld" = yes; then # If archive_cmds runs LD, not CC, wlarc should be empty wlarc='${wl}' # Set some defaults for GNU ld with shared library support. These # are reset later if shared libraries are not supported. Putting them # here allows them to be overridden if necessary. runpath_var=LD_RUN_PATH hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' export_dynamic_flag_spec='${wl}--export-dynamic' # ancient GNU ld didn't support --whole-archive et. al. if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else whole_archive_flag_spec= fi supports_anon_versioning=no case `$LD -v 2>/dev/null` in *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... *\ 2.11.*) ;; # other 2.11 versions *) supports_anon_versioning=yes ;; esac # See if GNU ld supports shared libraries. case $host_os in aix[3-9]*) # On AIX/PPC, the GNU linker is very broken if test "$host_cpu" != ia64; then ld_shlibs=no cat <&2 *** Warning: the GNU linker, at least up to release 2.9.1, is reported *** to be unable to reliably create shared libraries on AIX. *** Therefore, libtool is disabling shared libraries support. If you *** really care for shared libraries, you may want to modify your PATH *** so that a non-GNU linker is found, and then restart. EOF fi ;; amigaos*) archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes # Samuel A. Falvo II reports # that the semantics of dynamic libraries on AmigaOS, at least up # to version 4, is to share data among multiple programs linked # with the same dynamic library. Since this doesn't match the # behavior of shared libraries on other platforms, we can't use # them. ld_shlibs=no ;; beos*) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then allow_undefined_flag=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else ld_shlibs=no fi ;; cygwin* | mingw* | pw32*) # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, # as there is no search path for DLLs. hardcode_libdir_flag_spec='-L$libdir' allow_undefined_flag=unsupported always_export_symbols=no enable_shared_with_static_runtimes=yes export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then cp $export_symbols $output_objdir/$soname.def; else echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else ld_shlibs=no fi ;; interix[3-9]*) hardcode_direct=no hardcode_shlibpath_var=no hardcode_libdir_flag_spec='${wl}-rpath,$libdir' export_dynamic_flag_spec='${wl}-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; gnu* | linux* | k*bsd*-gnu) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then tmp_addflag= case $cc_basename,$host_cpu in pgcc*) # Portland Group C compiler whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag' ;; pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag -Mnomain' ;; ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 tmp_addflag=' -i_dynamic' ;; efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 tmp_addflag=' -i_dynamic -nofor_main' ;; ifc* | ifort*) # Intel Fortran compiler tmp_addflag=' -nofor_main' ;; esac case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' tmp_sharedflag='-G' ;; *Sun\ F*) # Sun Fortran 8.3 tmp_sharedflag='-G' ;; *) tmp_sharedflag='-shared' ;; esac archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' if test $supports_anon_versioning = yes; then archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ $echo "local: *; };" >> $output_objdir/$libname.ver~ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' fi link_all_deplibs=no else ld_shlibs=no fi ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' fi ;; solaris*) if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then ld_shlibs=no cat <&2 *** Warning: The releases 2.8.* of the GNU linker cannot reliably *** create shared libraries on Solaris systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.9.1 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. EOF elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) case `$LD -v 2>&1` in *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) ld_shlibs=no cat <<_LT_EOF 1>&2 *** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not *** reliably create shared libraries on SCO systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.16.91.0.3 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. _LT_EOF ;; *) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' else ld_shlibs=no fi ;; esac ;; sunos4*) archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' wlarc= hardcode_direct=yes hardcode_shlibpath_var=no ;; *) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi ;; esac if test "$ld_shlibs" = no; then runpath_var= hardcode_libdir_flag_spec= export_dynamic_flag_spec= whole_archive_flag_spec= fi else # PORTME fill in a description of your system's linker (not GNU ld) case $host_os in aix3*) allow_undefined_flag=unsupported always_export_symbols=yes archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' # Note: this linker hardcodes the directories in LIBPATH if there # are no directories specified by -L. hardcode_minus_L=yes if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then # Neither direct hardcoding nor static linking is supported with a # broken collect2. hardcode_direct=unsupported fi ;; aix[4-9]*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag="" else # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm if $NM -V 2>&1 | grep 'GNU' > /dev/null; then export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' else export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' fi aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # need to do runtime linking. case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) for ld_flag in $LDFLAGS; do if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then aix_use_runtimelinking=yes break fi done ;; esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. archive_cmds='' hardcode_direct=yes hardcode_libdir_separator=':' link_all_deplibs=yes if test "$GCC" = yes; then case $host_os in aix4.[012]|aix4.[012].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && \ strings "$collect2name" | grep resolve_lib_name >/dev/null then # We have reworked collect2 : else # We have old collect2 hardcode_direct=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking hardcode_minus_L=yes hardcode_libdir_flag_spec='-L$libdir' hardcode_libdir_separator= fi ;; esac shared_flag='-shared' if test "$aix_use_runtimelinking" = yes; then shared_flag="$shared_flag "'${wl}-G' fi else # not using gcc if test "$host_cpu" = ia64; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' fi fi fi # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to export. always_export_symbols=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. allow_undefined_flag='-berok' # Determine the default libpath from the value encoded in an empty executable. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && $as_test_x conftest$ac_exeext; then lt_aix_libpath_sed=' /Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/ p } }' aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' allow_undefined_flag="-z nodefs" archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an empty executable. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && $as_test_x conftest$ac_exeext; then lt_aix_libpath_sed=' /Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/ p } }' aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. no_undefined_flag=' ${wl}-bernotok' allow_undefined_flag=' ${wl}-berok' # Exported symbols can be pulled into shared objects from archives whole_archive_flag_spec='$convenience' archive_cmds_need_lc=yes # This is similar to how AIX traditionally builds its shared libraries. archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; amigaos*) archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes # see comment about different semantics on the GNU ld section ld_shlibs=no ;; bsdi[45]*) export_dynamic_flag_spec=-rdynamic ;; cygwin* | mingw* | pw32*) # When not using gcc, we currently assume that we are using # Microsoft Visual C++. # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. hardcode_libdir_flag_spec=' ' allow_undefined_flag=unsupported # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' # The linker will automatically build a .lib file if we build a DLL. old_archive_From_new_cmds='true' # FIXME: Should let the user specify the lib program. old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' fix_srcfile_path='`cygpath -w "$srcfile"`' enable_shared_with_static_runtimes=yes ;; darwin* | rhapsody*) case $host_os in rhapsody* | darwin1.[012]) allow_undefined_flag='${wl}-undefined ${wl}suppress' ;; *) # Darwin 1.3 on if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' else case ${MACOSX_DEPLOYMENT_TARGET} in 10.[012]) allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; 10.*) allow_undefined_flag='${wl}-undefined ${wl}dynamic_lookup' ;; esac fi ;; esac archive_cmds_need_lc=no hardcode_direct=no hardcode_automatic=yes hardcode_shlibpath_var=unsupported whole_archive_flag_spec='' link_all_deplibs=yes if test "$GCC" = yes ; then output_verbose_link_cmd='echo' archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" else case $cc_basename in xlc*) output_verbose_link_cmd='echo' archive_cmds='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring' module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ;; *) ld_shlibs=no ;; esac fi ;; dgux*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-L$libdir' hardcode_shlibpath_var=no ;; freebsd1*) ld_shlibs=no ;; # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor # support. Future versions do this automatically, but an explicit c++rt0.o # does not break anything, and helps significantly (at the cost of a little # extra space). freebsd2.2*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; # Unfortunately, older versions of FreeBSD 2 do not have this feature. freebsd2*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes hardcode_minus_L=yes hardcode_shlibpath_var=no ;; # FreeBSD 3 and greater uses gcc -shared to do shared libraries. freebsd* | dragonfly*) archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; hpux9*) if test "$GCC" = yes; then archive_cmds='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' fi hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_separator=: hardcode_direct=yes # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes export_dynamic_flag_spec='${wl}-E' ;; hpux10*) if test "$GCC" = yes -a "$with_gnu_ld" = no; then archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi if test "$with_gnu_ld" = no; then hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_separator=: hardcode_direct=yes export_dynamic_flag_spec='${wl}-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes fi ;; hpux11*) if test "$GCC" = yes -a "$with_gnu_ld" = no; then case $host_cpu in hppa*64*) archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) archive_cmds='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac else case $host_cpu in hppa*64*) archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac fi if test "$with_gnu_ld" = no; then hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_separator=: case $host_cpu in hppa*64*|ia64*) hardcode_libdir_flag_spec_ld='+b $libdir' hardcode_direct=no hardcode_shlibpath_var=no ;; *) hardcode_direct=yes export_dynamic_flag_spec='${wl}-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes ;; esac fi ;; irix5* | irix6* | nonstopux*) if test "$GCC" = yes; then archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' hardcode_libdir_flag_spec_ld='-rpath $libdir' fi hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: link_all_deplibs=yes ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out else archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF fi hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; newsos6) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: hardcode_shlibpath_var=no ;; openbsd*) if test -f /usr/libexec/ld.so; then hardcode_direct=yes hardcode_shlibpath_var=no if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' hardcode_libdir_flag_spec='${wl}-rpath,$libdir' export_dynamic_flag_spec='${wl}-E' else case $host_os in openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-R$libdir' ;; *) archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ;; esac fi else ld_shlibs=no fi ;; os2*) hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes allow_undefined_flag=unsupported archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' old_archive_From_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ;; osf3*) if test "$GCC" = yes; then allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else allow_undefined_flag=' -expect_unresolved \*' archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' fi hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: ;; osf4* | osf5*) # as osf3* with the addition of -msym flag if test "$GCC" = yes; then allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' else allow_undefined_flag=' -expect_unresolved \*' archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' # Both c and cxx compiler support -rpath directly hardcode_libdir_flag_spec='-rpath $libdir' fi hardcode_libdir_separator=: ;; solaris*) no_undefined_flag=' -z text' if test "$GCC" = yes; then wlarc='${wl}' archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' else wlarc='' archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' fi hardcode_libdir_flag_spec='-R$libdir' hardcode_shlibpath_var=no case $host_os in solaris2.[0-5] | solaris2.[0-5].*) ;; *) # The compiler driver will combine and reorder linker options, # but understands `-z linker_flag'. GCC discards it without `$wl', # but is careful enough not to reorder. # Supported since Solaris 2.6 (maybe 2.5.1?) if test "$GCC" = yes; then whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' else whole_archive_flag_spec='-z allextract$convenience -z defaultextract' fi ;; esac link_all_deplibs=yes ;; sunos4*) if test "x$host_vendor" = xsequent; then # Use $CC to link under sequent, because it throws in some extra .o # files that make .init and .fini sections work. archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' fi hardcode_libdir_flag_spec='-L$libdir' hardcode_direct=yes hardcode_minus_L=yes hardcode_shlibpath_var=no ;; sysv4) case $host_vendor in sni) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes # is this really true??? ;; siemens) ## LD is ld it makes a PLAMLIB ## CC just makes a GrossModule. archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' reload_cmds='$CC -r -o $output$reload_objs' hardcode_direct=no ;; motorola) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=no #Motorola manual says yes, but my tests say they lie ;; esac runpath_var='LD_RUN_PATH' hardcode_shlibpath_var=no ;; sysv4.3*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_shlibpath_var=no export_dynamic_flag_spec='-Bexport' ;; sysv4*MP*) if test -d /usr/nec; then archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_shlibpath_var=no runpath_var=LD_RUN_PATH hardcode_runpath_var=yes ld_shlibs=yes fi ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) no_undefined_flag='${wl}-z,text' archive_cmds_need_lc=no hardcode_shlibpath_var=no runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; sysv5* | sco3.2v5* | sco5v6*) # Note: We can NOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. no_undefined_flag='${wl}-z,text' allow_undefined_flag='${wl}-z,nodefs' archive_cmds_need_lc=no hardcode_shlibpath_var=no hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' hardcode_libdir_separator=':' link_all_deplibs=yes export_dynamic_flag_spec='${wl}-Bexport' runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then archive_cmds='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; uts4*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-L$libdir' hardcode_shlibpath_var=no ;; *) ld_shlibs=no ;; esac fi { echo "$as_me:$LINENO: result: $ld_shlibs" >&5 echo "${ECHO_T}$ld_shlibs" >&6; } test "$ld_shlibs" = no && can_build_shared=no # # Do we need to explicitly link libc? # case "x$archive_cmds_need_lc" in x|xyes) # Assume -lc should be added archive_cmds_need_lc=yes if test "$enable_shared" = yes && test "$GCC" = yes; then case $archive_cmds in *'~'*) # FIXME: we may have to deal with multi-command sequences. ;; '$CC '*) # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; } $rm conftest* echo "$lt_simple_compile_test_code" > conftest.$ac_ext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } 2>conftest.err; then soname=conftest lib=conftest libobjs=conftest.$ac_objext deplibs= wl=$lt_prog_compiler_wl pic_flag=$lt_prog_compiler_pic compiler_flags=-v linker_flags=-v verstring= output_objdir=. libname=conftest lt_save_allow_undefined_flag=$allow_undefined_flag allow_undefined_flag= if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } then archive_cmds_need_lc=no else archive_cmds_need_lc=yes fi allow_undefined_flag=$lt_save_allow_undefined_flag else cat conftest.err 1>&5 fi $rm conftest* { echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5 echo "${ECHO_T}$archive_cmds_need_lc" >&6; } ;; esac fi ;; esac { echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; } library_names_spec= libname_spec='lib$name' soname_spec= shrext_cmds=".so" postinstall_cmds= postuninstall_cmds= finish_cmds= finish_eval= shlibpath_var= shlibpath_overrides_runpath=unknown version_type=none dynamic_linker="$host_os ld.so" sys_lib_dlsearch_path_spec="/lib /usr/lib" if test "$GCC" = yes; then case $host_os in darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; *) lt_awk_arg="/^libraries:/" ;; esac lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"` if echo "$lt_search_path_spec" | grep ';' >/dev/null ; then # if the path contains ";" then we assume it to be the separator # otherwise default to the standard path separator (i.e. ":") - it is # assumed that no part of a normal pathname contains ";" but that should # okay in the real world where ";" in dirpaths is itself problematic. lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e 's/;/ /g'` else lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi # Ok, now we have the path, separated by spaces, we can step through it # and add multilib dir if necessary. lt_tmp_lt_search_path_spec= lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` for lt_sys_path in $lt_search_path_spec; do if test -d "$lt_sys_path/$lt_multi_os_dir"; then lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" else test -d "$lt_sys_path" && \ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" fi done lt_search_path_spec=`echo $lt_tmp_lt_search_path_spec | awk ' BEGIN {RS=" "; FS="/|\n";} { lt_foo=""; lt_count=0; for (lt_i = NF; lt_i > 0; lt_i--) { if ($lt_i != "" && $lt_i != ".") { if ($lt_i == "..") { lt_count++; } else { if (lt_count == 0) { lt_foo="/" $lt_i lt_foo; } else { lt_count--; } } } } if (lt_foo != "") { lt_freq[lt_foo]++; } if (lt_freq[lt_foo] == 1) { print lt_foo; } }'` sys_lib_search_path_spec=`echo $lt_search_path_spec` else sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" fi need_lib_prefix=unknown hardcode_into_libs=no # when you set need_version to no, make sure it does not cause -set_version # flags to be left without arguments need_version=unknown case $host_os in aix3*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' shlibpath_var=LIBPATH # AIX 3 has no versioning support, so we append a major version to the name. soname_spec='${libname}${release}${shared_ext}$major' ;; aix[4-9]*) version_type=linux need_lib_prefix=no need_version=no hardcode_into_libs=yes if test "$host_cpu" = ia64; then # AIX 5 supports IA64 library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH else # With GCC up to 2.95.x, collect2 would create an import file # for dependence libraries. The import file would start with # the line `#! .'. This would cause the generated library to # depend on `.', always an invalid library. This was fixed in # development snapshots of GCC prior to 3.0. case $host_os in aix4 | aix4.[01] | aix4.[01].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then : else can_build_shared=no fi ;; esac # AIX (on Power*) has no versioning support, so currently we can not hardcode correct # soname into executable. Probably we can add versioning support to # collect2, so additional links can be useful in future. if test "$aix_use_runtimelinking" = yes; then # If using run time linking (on AIX 4.2 or later) use lib.so # instead of lib.a to let people know that these are not # typical AIX shared libraries. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' else # We preserve .a as extension for shared libraries through AIX4.2 # and later when we are not doing run time linking. library_names_spec='${libname}${release}.a $libname.a' soname_spec='${libname}${release}${shared_ext}$major' fi shlibpath_var=LIBPATH fi ;; amigaos*) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; beos*) library_names_spec='${libname}${shared_ext}' dynamic_linker="$host_os ld.so" shlibpath_var=LIBRARY_PATH ;; bsdi[45]*) version_type=linux need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" # the default ld.so.conf also contains /usr/contrib/lib and # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow # libtool to hard-code these into programs ;; cygwin* | mingw* | pw32*) version_type=windows shrext_cmds=".dll" need_version=no need_lib_prefix=no case $GCC,$host_os in yes,cygwin* | yes,mingw* | yes,pw32*) library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname~ chmod a+x \$dldir/$dlname' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $rm \$dlpath' shlibpath_overrides_runpath=yes case $host_os in cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" ;; mingw*) # MinGW DLLs use traditional 'lib' prefix soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then # It is most probably a Windows format PATH printed by # mingw gcc, but we are running on Cygwin. Gcc prints its search # path with ; separators, and with drive letters. We can handle the # drive letters (cygwin fileutils understands them), so leave them, # especially as we might pass files found there to a mingw objdump, # which wouldn't understand a cygwinified path. Ahh. sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` else sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; esac ;; *) library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' ;; esac dynamic_linker='Win32 ld.exe' # FIXME: first we should search . and the directory the executable is in shlibpath_var=PATH ;; darwin* | rhapsody*) dynamic_linker="$host_os dyld" version_type=darwin need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' soname_spec='${libname}${release}${major}$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ;; dgux*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; freebsd1*) dynamic_linker=no ;; freebsd* | dragonfly*) # DragonFly does not have aout. When/if they implement a new # versioning mechanism, adjust this. if test -x /usr/bin/objformat; then objformat=`/usr/bin/objformat` else case $host_os in freebsd[123]*) objformat=aout ;; *) objformat=elf ;; esac fi version_type=freebsd-$objformat case $version_type in freebsd-elf*) library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' need_version=no need_lib_prefix=no ;; freebsd-*) library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' need_version=yes ;; esac shlibpath_var=LD_LIBRARY_PATH case $host_os in freebsd2*) shlibpath_overrides_runpath=yes ;; freebsd3.[01]* | freebsdelf3.[01]*) shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; *) # from 4.6 on, and DragonFly shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; esac ;; gnu*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH hardcode_into_libs=yes ;; hpux9* | hpux10* | hpux11*) # Give a soname corresponding to the major version so that dld.sl refuses to # link against other versions. version_type=sunos need_lib_prefix=no need_version=no case $host_cpu in ia64*) shrext_cmds='.so' hardcode_into_libs=yes dynamic_linker="$host_os dld.so" shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' if test "X$HPUX_IA64_MODE" = X32; then sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" else sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" fi sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; hppa*64*) shrext_cmds='.sl' hardcode_into_libs=yes dynamic_linker="$host_os dld.sl" shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; *) shrext_cmds='.sl' dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' ;; esac # HP-UX runs *really* slowly unless shared libraries are mode 555. postinstall_cmds='chmod 555 $lib' ;; interix[3-9]*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; irix5* | irix6* | nonstopux*) case $host_os in nonstopux*) version_type=nonstopux ;; *) if test "$lt_cv_prog_gnu_ld" = yes; then version_type=linux else version_type=irix fi ;; esac need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' case $host_os in irix5* | nonstopux*) libsuff= shlibsuff= ;; *) case $LD in # libtool.m4 will add one of these switches to LD *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= libmagic=32-bit;; *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 libmagic=64-bit;; *) libsuff= shlibsuff= libmagic=never-match;; esac ;; esac shlibpath_var=LD_LIBRARY${shlibsuff}_PATH shlibpath_overrides_runpath=no sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" hardcode_into_libs=yes ;; # No shared lib support for Linux oldld, aout, or coff. linux*oldld* | linux*aout* | linux*coff*) dynamic_linker=no ;; # This must be Linux ELF. linux* | k*bsd*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" fi # We used to test for /lib/ld.so.1 and disable shared libraries on # powerpc, because MkLinux only supported shared libraries with the # GNU dynamic linker. Since this was broken with cross compilers, # most powerpc-linux boxes support dynamic linking these days and # people can always --disable-shared, the test was removed, and we # assume the GNU/Linux dynamic linker is in use. dynamic_linker='GNU/Linux ld.so' ;; netbsdelf*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='NetBSD ld.elf_so' ;; netbsd*) version_type=sunos need_lib_prefix=no need_version=no if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='NetBSD ld.elf_so' fi shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; newsos6) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; nto-qnx*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; openbsd*) version_type=sunos sys_lib_dlsearch_path_spec="/usr/lib" need_lib_prefix=no # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. case $host_os in openbsd3.3 | openbsd3.3.*) need_version=yes ;; *) need_version=no ;; esac library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then case $host_os in openbsd2.[89] | openbsd2.[89].*) shlibpath_overrides_runpath=no ;; *) shlibpath_overrides_runpath=yes ;; esac else shlibpath_overrides_runpath=yes fi ;; os2*) libname_spec='$name' shrext_cmds=".dll" need_lib_prefix=no library_names_spec='$libname${shared_ext} $libname.a' dynamic_linker='OS/2 ld.exe' shlibpath_var=LIBPATH ;; osf3* | osf4* | osf5*) version_type=osf need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ;; rdos*) dynamic_linker=no ;; solaris*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes # ldd complains unless libraries are executable postinstall_cmds='chmod +x $lib' ;; sunos4*) version_type=sunos library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes if test "$with_gnu_ld" = yes; then need_lib_prefix=no fi need_version=yes ;; sysv4 | sysv4.3*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH case $host_vendor in sni) shlibpath_overrides_runpath=no need_lib_prefix=no export_dynamic_flag_spec='${wl}-Blargedynsym' runpath_var=LD_RUN_PATH ;; siemens) need_lib_prefix=no ;; motorola) need_lib_prefix=no need_version=no shlibpath_overrides_runpath=no sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ;; esac ;; sysv4*MP*) if test -d /usr/nec ;then version_type=linux library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' soname_spec='$libname${shared_ext}.$major' shlibpath_var=LD_LIBRARY_PATH fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) version_type=freebsd-elf need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH hardcode_into_libs=yes if test "$with_gnu_ld" = yes; then sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' shlibpath_overrides_runpath=no else sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' shlibpath_overrides_runpath=yes case $host_os in sco3.2v5*) sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ;; esac fi sys_lib_dlsearch_path_spec='/usr/lib' ;; uts4*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; *) dynamic_linker=no ;; esac { echo "$as_me:$LINENO: result: $dynamic_linker" >&5 echo "${ECHO_T}$dynamic_linker" >&6; } test "$dynamic_linker" = no && can_build_shared=no if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec" fi sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec" fi sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" variables_saved_for_relink="PATH $shlibpath_var $runpath_var" if test "$GCC" = yes; then variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi { echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; } hardcode_action= if test -n "$hardcode_libdir_flag_spec" || \ test -n "$runpath_var" || \ test "X$hardcode_automatic" = "Xyes" ; then # We can hardcode non-existant directories. if test "$hardcode_direct" != no && # If the only mechanism to avoid hardcoding is shlibpath_var, we # have to relink, otherwise we might link with an installed library # when we should be linking with a yet-to-be-installed one ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, )" != no && test "$hardcode_minus_L" != no; then # Linking always hardcodes the temporary library directory. hardcode_action=relink else # We can link without hardcoding, and we can hardcode nonexisting dirs. hardcode_action=immediate fi else # We cannot hardcode anything, or else we can only hardcode existing # directories. hardcode_action=unsupported fi { echo "$as_me:$LINENO: result: $hardcode_action" >&5 echo "${ECHO_T}$hardcode_action" >&6; } if test "$hardcode_action" = relink; then # Fast installation is not supported enable_fast_install=no elif test "$shlibpath_overrides_runpath" = yes || test "$enable_shared" = no; then # Fast installation is not necessary enable_fast_install=needless fi striplib= old_striplib= { echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6; } if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" test -z "$striplib" && striplib="$STRIP --strip-unneeded" { echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6; } else # FIXME - insert some real tests, host_os isn't really good enough case $host_os in darwin*) if test -n "$STRIP" ; then striplib="$STRIP -x" old_striplib="$STRIP -S" { echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi ;; *) { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } ;; esac fi if test "x$enable_dlopen" != xyes; then enable_dlopen=unknown enable_dlopen_self=unknown enable_dlopen_self_static=unknown else lt_cv_dlopen=no lt_cv_dlopen_libs= case $host_os in beos*) lt_cv_dlopen="load_add_on" lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ;; mingw* | pw32*) lt_cv_dlopen="LoadLibrary" lt_cv_dlopen_libs= ;; cygwin*) lt_cv_dlopen="dlopen" lt_cv_dlopen_libs= ;; darwin*) # if libdl is installed we need to link against it { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; } if test "${ac_cv_lib_dl_dlopen+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldl $LIBS" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dlopen (); int main () { return dlopen (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && $as_test_x conftest$ac_exeext; then ac_cv_lib_dl_dlopen=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_lib_dl_dlopen=no fi rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; } if test $ac_cv_lib_dl_dlopen = yes; then lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" else lt_cv_dlopen="dyld" lt_cv_dlopen_libs= lt_cv_dlopen_self=yes fi ;; *) { echo "$as_me:$LINENO: checking for shl_load" >&5 echo $ECHO_N "checking for shl_load... $ECHO_C" >&6; } if test "${ac_cv_func_shl_load+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Define shl_load to an innocuous variant, in case declares shl_load. For example, HP-UX 11i declares gettimeofday. */ #define shl_load innocuous_shl_load /* System header to define __stub macros and hopefully few prototypes, which can conflict with char shl_load (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef shl_load /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char shl_load (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined __stub_shl_load || defined __stub___shl_load choke me #endif int main () { return shl_load (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && $as_test_x conftest$ac_exeext; then ac_cv_func_shl_load=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_func_shl_load=no fi rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext fi { echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 echo "${ECHO_T}$ac_cv_func_shl_load" >&6; } if test $ac_cv_func_shl_load = yes; then lt_cv_dlopen="shl_load" else { echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6; } if test "${ac_cv_lib_dld_shl_load+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldld $LIBS" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char shl_load (); int main () { return shl_load (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && $as_test_x conftest$ac_exeext; then ac_cv_lib_dld_shl_load=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_lib_dld_shl_load=no fi rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6; } if test $ac_cv_lib_dld_shl_load = yes; then lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" else { echo "$as_me:$LINENO: checking for dlopen" >&5 echo $ECHO_N "checking for dlopen... $ECHO_C" >&6; } if test "${ac_cv_func_dlopen+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Define dlopen to an innocuous variant, in case declares dlopen. For example, HP-UX 11i declares gettimeofday. */ #define dlopen innocuous_dlopen /* System header to define __stub macros and hopefully few prototypes, which can conflict with char dlopen (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef dlopen /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dlopen (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined __stub_dlopen || defined __stub___dlopen choke me #endif int main () { return dlopen (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && $as_test_x conftest$ac_exeext; then ac_cv_func_dlopen=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_func_dlopen=no fi rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext fi { echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 echo "${ECHO_T}$ac_cv_func_dlopen" >&6; } if test $ac_cv_func_dlopen = yes; then lt_cv_dlopen="dlopen" else { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; } if test "${ac_cv_lib_dl_dlopen+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldl $LIBS" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dlopen (); int main () { return dlopen (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && $as_test_x conftest$ac_exeext; then ac_cv_lib_dl_dlopen=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_lib_dl_dlopen=no fi rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; } if test $ac_cv_lib_dl_dlopen = yes; then lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" else { echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6; } if test "${ac_cv_lib_svld_dlopen+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lsvld $LIBS" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dlopen (); int main () { return dlopen (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && $as_test_x conftest$ac_exeext; then ac_cv_lib_svld_dlopen=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_lib_svld_dlopen=no fi rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6; } if test $ac_cv_lib_svld_dlopen = yes; then lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" else { echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6; } if test "${ac_cv_lib_dld_dld_link+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldld $LIBS" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dld_link (); int main () { return dld_link (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && $as_test_x conftest$ac_exeext; then ac_cv_lib_dld_dld_link=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_lib_dld_dld_link=no fi rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6; } if test $ac_cv_lib_dld_dld_link = yes; then lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" fi fi fi fi fi fi ;; esac if test "x$lt_cv_dlopen" != xno; then enable_dlopen=yes else enable_dlopen=no fi case $lt_cv_dlopen in dlopen) save_CPPFLAGS="$CPPFLAGS" test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" save_LDFLAGS="$LDFLAGS" wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" save_LIBS="$LIBS" LIBS="$lt_cv_dlopen_libs $LIBS" { echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6; } if test "${lt_cv_dlopen_self+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test "$cross_compiling" = yes; then : lt_cv_dlopen_self=cross else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext < #endif #include #ifdef RTLD_GLOBAL # define LT_DLGLOBAL RTLD_GLOBAL #else # ifdef DL_GLOBAL # define LT_DLGLOBAL DL_GLOBAL # else # define LT_DLGLOBAL 0 # endif #endif /* We may have to define LT_DLLAZY_OR_NOW in the command line if we find out it does not work in some platform. */ #ifndef LT_DLLAZY_OR_NOW # ifdef RTLD_LAZY # define LT_DLLAZY_OR_NOW RTLD_LAZY # else # ifdef DL_LAZY # define LT_DLLAZY_OR_NOW DL_LAZY # else # ifdef RTLD_NOW # define LT_DLLAZY_OR_NOW RTLD_NOW # else # ifdef DL_NOW # define LT_DLLAZY_OR_NOW DL_NOW # else # define LT_DLLAZY_OR_NOW 0 # endif # endif # endif # endif #endif #ifdef __cplusplus extern "C" void exit (int); #endif void fnord() { int i=42;} int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); int status = $lt_dlunknown; if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; /* dlclose (self); */ } else puts (dlerror ()); exit (status); } EOF if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; esac else : # compilation failed lt_cv_dlopen_self=no fi fi rm -fr conftest* fi { echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 echo "${ECHO_T}$lt_cv_dlopen_self" >&6; } if test "x$lt_cv_dlopen_self" = xyes; then wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" { echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6; } if test "${lt_cv_dlopen_self_static+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test "$cross_compiling" = yes; then : lt_cv_dlopen_self_static=cross else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext < #endif #include #ifdef RTLD_GLOBAL # define LT_DLGLOBAL RTLD_GLOBAL #else # ifdef DL_GLOBAL # define LT_DLGLOBAL DL_GLOBAL # else # define LT_DLGLOBAL 0 # endif #endif /* We may have to define LT_DLLAZY_OR_NOW in the command line if we find out it does not work in some platform. */ #ifndef LT_DLLAZY_OR_NOW # ifdef RTLD_LAZY # define LT_DLLAZY_OR_NOW RTLD_LAZY # else # ifdef DL_LAZY # define LT_DLLAZY_OR_NOW DL_LAZY # else # ifdef RTLD_NOW # define LT_DLLAZY_OR_NOW RTLD_NOW # else # ifdef DL_NOW # define LT_DLLAZY_OR_NOW DL_NOW # else # define LT_DLLAZY_OR_NOW 0 # endif # endif # endif # endif #endif #ifdef __cplusplus extern "C" void exit (int); #endif void fnord() { int i=42;} int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); int status = $lt_dlunknown; if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; /* dlclose (self); */ } else puts (dlerror ()); exit (status); } EOF if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; esac else : # compilation failed lt_cv_dlopen_self_static=no fi fi rm -fr conftest* fi { echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6; } fi CPPFLAGS="$save_CPPFLAGS" LDFLAGS="$save_LDFLAGS" LIBS="$save_LIBS" ;; esac case $lt_cv_dlopen_self in yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; *) enable_dlopen_self=unknown ;; esac case $lt_cv_dlopen_self_static in yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; *) enable_dlopen_self_static=unknown ;; esac fi # Report which library types will actually be built { echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; } { echo "$as_me:$LINENO: result: $can_build_shared" >&5 echo "${ECHO_T}$can_build_shared" >&6; } { echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; } test "$can_build_shared" = "no" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix[4-9]*) if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then test "$enable_shared" = yes && enable_static=no fi ;; esac { echo "$as_me:$LINENO: result: $enable_shared" >&5 echo "${ECHO_T}$enable_shared" >&6; } { echo "$as_me:$LINENO: checking whether to build static libraries" >&5 echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; } # Make sure either enable_shared or enable_static is yes. test "$enable_shared" = yes || enable_static=yes { echo "$as_me:$LINENO: result: $enable_static" >&5 echo "${ECHO_T}$enable_static" >&6; } # The else clause should only fire when bootstrapping the # libtool distribution, otherwise you forgot to ship ltmain.sh # with your package, and you will get complaints that there are # no rules to generate ltmain.sh. if test -f "$ltmain"; then # See if we are running on zsh, and set the options which allow our commands through # without removal of \ escapes. if test -n "${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi # Now quote all the things that may contain metacharacters while being # careful not to overquote the AC_SUBSTed values. We take copies of the # variables and quote the copies for generation of the libtool script. for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ SED SHELL STRIP \ libname_spec library_names_spec soname_spec extract_expsyms_cmds \ old_striplib striplib file_magic_cmd finish_cmds finish_eval \ deplibs_check_method reload_flag reload_cmds need_locks \ lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ lt_cv_sys_global_symbol_to_c_name_address \ sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ old_postinstall_cmds old_postuninstall_cmds \ compiler \ CC \ LD \ lt_prog_compiler_wl \ lt_prog_compiler_pic \ lt_prog_compiler_static \ lt_prog_compiler_no_builtin_flag \ export_dynamic_flag_spec \ thread_safe_flag_spec \ whole_archive_flag_spec \ enable_shared_with_static_runtimes \ old_archive_cmds \ old_archive_from_new_cmds \ predep_objects \ postdep_objects \ predeps \ postdeps \ compiler_lib_search_path \ compiler_lib_search_dirs \ archive_cmds \ archive_expsym_cmds \ postinstall_cmds \ postuninstall_cmds \ old_archive_from_expsyms_cmds \ allow_undefined_flag \ no_undefined_flag \ export_symbols_cmds \ hardcode_libdir_flag_spec \ hardcode_libdir_flag_spec_ld \ hardcode_libdir_separator \ hardcode_automatic \ module_cmds \ module_expsym_cmds \ lt_cv_prog_compiler_c_o \ fix_srcfile_path \ exclude_expsyms \ include_expsyms; do case $var in old_archive_cmds | \ old_archive_from_new_cmds | \ archive_cmds | \ archive_expsym_cmds | \ module_cmds | \ module_expsym_cmds | \ old_archive_from_expsyms_cmds | \ export_symbols_cmds | \ extract_expsyms_cmds | reload_cmds | finish_cmds | \ postinstall_cmds | postuninstall_cmds | \ old_postinstall_cmds | old_postuninstall_cmds | \ sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) # Double-quote double-evaled strings. eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" ;; *) eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" ;; esac done case $lt_echo in *'\$0 --fallback-echo"') lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` ;; esac cfgfile="${ofile}T" trap "$rm \"$cfgfile\"; exit 1" 1 2 15 $rm -f "$cfgfile" { echo "$as_me:$LINENO: creating $ofile" >&5 echo "$as_me: creating $ofile" >&6;} cat <<__EOF__ >> "$cfgfile" #! $SHELL # `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services. # Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) # NOTE: Changes made to this file will be lost: look at ltmain.sh. # # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 # Free Software Foundation, Inc. # # This file is part of GNU Libtool: # Originally by Gordon Matzigkeit , 1996 # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # A sed program that does not truncate output. SED=$lt_SED # Sed that helps us avoid accidentally triggering echo(1) options like -n. Xsed="$SED -e 1s/^X//" # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH # The names of the tagged configurations supported by this script. available_tags= # ### BEGIN LIBTOOL CONFIG # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: # Shell to use when invoking shell scripts. SHELL=$lt_SHELL # Whether or not to build shared libraries. build_libtool_libs=$enable_shared # Whether or not to build static libraries. build_old_libs=$enable_static # Whether or not to add -lc for building shared libraries. build_libtool_need_lc=$archive_cmds_need_lc # Whether or not to disallow shared libs when runtime libs are static allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes # Whether or not to optimize for fast installation. fast_install=$enable_fast_install # The host system. host_alias=$host_alias host=$host host_os=$host_os # The build system. build_alias=$build_alias build=$build build_os=$build_os # An echo program that does not interpret backslashes. echo=$lt_echo # The archiver. AR=$lt_AR AR_FLAGS=$lt_AR_FLAGS # A C compiler. LTCC=$lt_LTCC # LTCC compiler flags. LTCFLAGS=$lt_LTCFLAGS # A language-specific compiler. CC=$lt_compiler # Is the compiler the GNU C compiler? with_gcc=$GCC # An ERE matcher. EGREP=$lt_EGREP # The linker used to build libraries. LD=$lt_LD # Whether we need hard or soft links. LN_S=$lt_LN_S # A BSD-compatible nm program. NM=$lt_NM # A symbol stripping program STRIP=$lt_STRIP # Used to examine libraries when file_magic_cmd begins "file" MAGIC_CMD=$MAGIC_CMD # Used on cygwin: DLL creation program. DLLTOOL="$DLLTOOL" # Used on cygwin: object dumper. OBJDUMP="$OBJDUMP" # Used on cygwin: assembler. AS="$AS" # The name of the directory that contains temporary libtool files. objdir=$objdir # How to create reloadable object files. reload_flag=$lt_reload_flag reload_cmds=$lt_reload_cmds # How to pass a linker flag through the compiler. wl=$lt_lt_prog_compiler_wl # Object file suffix (normally "o"). objext="$ac_objext" # Old archive suffix (normally "a"). libext="$libext" # Shared library suffix (normally ".so"). shrext_cmds='$shrext_cmds' # Executable file suffix (normally ""). exeext="$exeext" # Additional compiler flags for building library objects. pic_flag=$lt_lt_prog_compiler_pic pic_mode=$pic_mode # What is the maximum length of a command? max_cmd_len=$lt_cv_sys_max_cmd_len # Does compiler simultaneously support -c and -o options? compiler_c_o=$lt_lt_cv_prog_compiler_c_o # Must we lock files when doing compilation? need_locks=$lt_need_locks # Do we need the lib prefix for modules? need_lib_prefix=$need_lib_prefix # Do we need a version for libraries? need_version=$need_version # Whether dlopen is supported. dlopen_support=$enable_dlopen # Whether dlopen of programs is supported. dlopen_self=$enable_dlopen_self # Whether dlopen of statically linked programs is supported. dlopen_self_static=$enable_dlopen_self_static # Compiler flag to prevent dynamic linking. link_static_flag=$lt_lt_prog_compiler_static # Compiler flag to turn off builtin functions. no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag # Compiler flag to allow reflexive dlopens. export_dynamic_flag_spec=$lt_export_dynamic_flag_spec # Compiler flag to generate shared objects directly from archives. whole_archive_flag_spec=$lt_whole_archive_flag_spec # Compiler flag to generate thread-safe objects. thread_safe_flag_spec=$lt_thread_safe_flag_spec # Library versioning type. version_type=$version_type # Format of library name prefix. libname_spec=$lt_libname_spec # List of archive names. First name is the real one, the rest are links. # The last name is the one that the linker finds with -lNAME. library_names_spec=$lt_library_names_spec # The coded name of the library, if different from the real name. soname_spec=$lt_soname_spec # Commands used to build and install an old-style archive. RANLIB=$lt_RANLIB old_archive_cmds=$lt_old_archive_cmds old_postinstall_cmds=$lt_old_postinstall_cmds old_postuninstall_cmds=$lt_old_postuninstall_cmds # Create an old-style archive from a shared archive. old_archive_from_new_cmds=$lt_old_archive_from_new_cmds # Create a temporary old-style archive to link instead of a shared archive. old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds # Commands used to build and install a shared archive. archive_cmds=$lt_archive_cmds archive_expsym_cmds=$lt_archive_expsym_cmds postinstall_cmds=$lt_postinstall_cmds postuninstall_cmds=$lt_postuninstall_cmds # Commands used to build a loadable module (assumed same as above if empty) module_cmds=$lt_module_cmds module_expsym_cmds=$lt_module_expsym_cmds # Commands to strip libraries. old_striplib=$lt_old_striplib striplib=$lt_striplib # Dependencies to place before the objects being linked to create a # shared library. predep_objects=$lt_predep_objects # Dependencies to place after the objects being linked to create a # shared library. postdep_objects=$lt_postdep_objects # Dependencies to place before the objects being linked to create a # shared library. predeps=$lt_predeps # Dependencies to place after the objects being linked to create a # shared library. postdeps=$lt_postdeps # The directories searched by this compiler when creating a shared # library compiler_lib_search_dirs=$lt_compiler_lib_search_dirs # The library search path used internally by the compiler when linking # a shared library. compiler_lib_search_path=$lt_compiler_lib_search_path # Method to check whether dependent libraries are shared objects. deplibs_check_method=$lt_deplibs_check_method # Command to use when deplibs_check_method == file_magic. file_magic_cmd=$lt_file_magic_cmd # Flag that allows shared libraries with undefined symbols to be built. allow_undefined_flag=$lt_allow_undefined_flag # Flag that forces no undefined symbols. no_undefined_flag=$lt_no_undefined_flag # Commands used to finish a libtool library installation in a directory. finish_cmds=$lt_finish_cmds # Same as above, but a single script fragment to be evaled but not shown. finish_eval=$lt_finish_eval # Take the output of nm and produce a listing of raw symbols and C names. global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe # Transform the output of nm in a proper C declaration global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl # Transform the output of nm in a C name address pair global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. runpath_var=$runpath_var # This is the shared library path variable. shlibpath_var=$shlibpath_var # Is shlibpath searched before the hard-coded library search path? shlibpath_overrides_runpath=$shlibpath_overrides_runpath # How to hardcode a shared library path into an executable. hardcode_action=$hardcode_action # Whether we should hardcode library paths into libraries. hardcode_into_libs=$hardcode_into_libs # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator # Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the # resulting binary. hardcode_direct=$hardcode_direct # Set to yes if using the -LDIR flag during linking hardcodes DIR into the # resulting binary. hardcode_minus_L=$hardcode_minus_L # Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into # the resulting binary. hardcode_shlibpath_var=$hardcode_shlibpath_var # Set to yes if building a shared library automatically hardcodes DIR into the library # and all subsequent libraries and executables linked against it. hardcode_automatic=$hardcode_automatic # Variables whose values should be saved in libtool wrapper scripts and # restored at relink time. variables_saved_for_relink="$variables_saved_for_relink" # Whether libtool must link a program against all its dependency libraries. link_all_deplibs=$link_all_deplibs # Compile-time system search path for libraries sys_lib_search_path_spec=$lt_sys_lib_search_path_spec # Run-time system search path for libraries sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec # Fix the shell variable \$srcfile for the compiler. fix_srcfile_path=$lt_fix_srcfile_path # Set to yes if exported symbols are required. always_export_symbols=$always_export_symbols # The commands to list exported symbols. export_symbols_cmds=$lt_export_symbols_cmds # The commands to extract the exported symbol list from a shared archive. extract_expsyms_cmds=$lt_extract_expsyms_cmds # Symbols that should not be listed in the preloaded symbols. exclude_expsyms=$lt_exclude_expsyms # Symbols that must always be exported. include_expsyms=$lt_include_expsyms # ### END LIBTOOL CONFIG __EOF__ case $host_os in aix3*) cat <<\EOF >> "$cfgfile" # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi EOF ;; esac # We use sed instead of cat because bash on DJGPP gets confused if # if finds mixed CR/LF and LF-only lines. Since sed operates in # text mode, it properly converts lines to CR/LF. This bash problem # is reportedly fixed, but why not run on old versions too? sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1) mv -f "$cfgfile" "$ofile" || \ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") chmod +x "$ofile" else # If there is no Makefile yet, we rely on a make rule to execute # `config.status --recheck' to rerun these tests and create the # libtool script then. ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` if test -f "$ltmain_in"; then test -f Makefile && make "$ltmain" fi fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu CC="$lt_save_CC" # Check whether --with-tags was given. if test "${with_tags+set}" = set; then withval=$with_tags; tagnames="$withval" fi if test -f "$ltmain" && test -n "$tagnames"; then if test ! -f "${ofile}"; then { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not exist" >&5 echo "$as_me: WARNING: output file \`$ofile' does not exist" >&2;} fi if test -z "$LTCC"; then eval "`$SHELL ${ofile} --config | grep '^LTCC='`" if test -z "$LTCC"; then { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not look like a libtool script" >&5 echo "$as_me: WARNING: output file \`$ofile' does not look like a libtool script" >&2;} else { echo "$as_me:$LINENO: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&5 echo "$as_me: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&2;} fi fi if test -z "$LTCFLAGS"; then eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`" fi # Extract list of available tagged configurations in $ofile. # Note that this assumes the entire list is on one line. available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'` lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for tagname in $tagnames; do IFS="$lt_save_ifs" # Check whether tagname contains only valid characters case `$echo "X$tagname" | $Xsed -e 's:[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]::g'` in "") ;; *) { { echo "$as_me:$LINENO: error: invalid tag name: $tagname" >&5 echo "$as_me: error: invalid tag name: $tagname" >&2;} { (exit 1); exit 1; }; } ;; esac if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null then { { echo "$as_me:$LINENO: error: tag name \"$tagname\" already exists" >&5 echo "$as_me: error: tag name \"$tagname\" already exists" >&2;} { (exit 1); exit 1; }; } fi # Update the list of available tags. if test -n "$tagname"; then echo appending configuration tag \"$tagname\" to $ofile case $tagname in CXX) if test -n "$CXX" && ( test "X$CXX" != "Xno" && ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || (test "X$CXX" != "Xg++"))) ; then ac_ext=cpp ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu archive_cmds_need_lc_CXX=no allow_undefined_flag_CXX= always_export_symbols_CXX=no archive_expsym_cmds_CXX= export_dynamic_flag_spec_CXX= hardcode_direct_CXX=no hardcode_libdir_flag_spec_CXX= hardcode_libdir_flag_spec_ld_CXX= hardcode_libdir_separator_CXX= hardcode_minus_L_CXX=no hardcode_shlibpath_var_CXX=unsupported hardcode_automatic_CXX=no module_cmds_CXX= module_expsym_cmds_CXX= link_all_deplibs_CXX=unknown old_archive_cmds_CXX=$old_archive_cmds no_undefined_flag_CXX= whole_archive_flag_spec_CXX= enable_shared_with_static_runtimes_CXX=no # Dependencies to place before and after the object being linked: predep_objects_CXX= postdep_objects_CXX= predeps_CXX= postdeps_CXX= compiler_lib_search_path_CXX= compiler_lib_search_dirs_CXX= # Source file extension for C++ test sources. ac_ext=cpp # Object file extension for compiled C++ test sources. objext=o objext_CXX=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;" # Code to be used in simple link tests lt_simple_link_test_code='int main(int, char *[]) { return(0); }' # ltmain only uses $CC for tagged configurations so make sure $CC is set. # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} # If no C compiler flags were specified, use CFLAGS. LTCFLAGS=${LTCFLAGS-"$CFLAGS"} # Allow CC to be a program name with arguments. compiler=$CC # save warnings/boilerplate of simple test code ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" >conftest.$ac_ext eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_compiler_boilerplate=`cat conftest.err` $rm conftest* ac_outfile=conftest.$ac_objext echo "$lt_simple_link_test_code" >conftest.$ac_ext eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_linker_boilerplate=`cat conftest.err` $rm -r conftest* # Allow CC to be a program name with arguments. lt_save_CC=$CC lt_save_LD=$LD lt_save_GCC=$GCC GCC=$GXX lt_save_with_gnu_ld=$with_gnu_ld lt_save_path_LD=$lt_cv_path_LD if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx else $as_unset lt_cv_prog_gnu_ld fi if test -n "${lt_cv_path_LDCXX+set}"; then lt_cv_path_LD=$lt_cv_path_LDCXX else $as_unset lt_cv_path_LD fi test -z "${LDCXX+set}" || LD=$LDCXX CC=${CXX-"c++"} compiler=$CC compiler_CXX=$CC for cc_temp in $compiler""; do case $cc_temp in compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; \-*) ;; *) break;; esac done cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` # We don't want -fno-exception wen compiling C++ code, so set the # no_builtin_flag separately if test "$GXX" = yes; then lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin' else lt_prog_compiler_no_builtin_flag_CXX= fi if test "$GXX" = yes; then # Set up default GNU C++ configuration # Check whether --with-gnu-ld was given. if test "${with_gnu_ld+set}" = set; then withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes else with_gnu_ld=no fi ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. { echo "$as_me:$LINENO: checking for ld used by $CC" >&5 echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; } case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [\\/]* | ?:[\\/]*) re_direlt='/[^/][^/]*/\.\./' # Canonicalize the pathname of ld ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then { echo "$as_me:$LINENO: checking for GNU ld" >&5 echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; } else { echo "$as_me:$LINENO: checking for non-GNU ld" >&5 echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; } fi if test "${lt_cv_path_LD+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -z "$LD"; then lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some variants of GNU ld only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$lt_cv_path_LD" -v 2>&1 &5 echo "${ECHO_T}$LD" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} { (exit 1); exit 1; }; } { echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; } if test "${lt_cv_prog_gnu_ld+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else # I'd rather use --version here, but apparently some GNU lds only accept -v. case `$LD -v 2>&1 &5 echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6; } with_gnu_ld=$lt_cv_prog_gnu_ld # Check if GNU C++ uses GNU ld as the underlying linker, since the # archiving commands below assume that GNU ld is being used. if test "$with_gnu_ld" = yes; then archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir' export_dynamic_flag_spec_CXX='${wl}--export-dynamic' # If archive_cmds runs LD, not CC, wlarc should be empty # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to # investigate it a little bit more. (MM) wlarc='${wl}' # ancient GNU ld didn't support --whole-archive et. al. if eval "`$CC -print-prog-name=ld` --help 2>&1" | \ grep 'no-whole-archive' > /dev/null; then whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else whole_archive_flag_spec_CXX= fi else with_gnu_ld=no wlarc= # A generic and very simple default shared library creation # command for GNU C++ for the case where it uses the native # linker, instead of GNU ld. If possible, this setting should # overridden to take advantage of the native linker features on # the platform it is being used on. archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' fi # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' else GXX=no with_gnu_ld=no wlarc= fi # PORTME: fill in a description of your system's C++ link characteristics { echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; } ld_shlibs_CXX=yes case $host_os in aix3*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; aix[4-9]*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag="" else aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # need to do runtime linking. case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) for ld_flag in $LDFLAGS; do case $ld_flag in *-brtl*) aix_use_runtimelinking=yes break ;; esac done ;; esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. archive_cmds_CXX='' hardcode_direct_CXX=yes hardcode_libdir_separator_CXX=':' link_all_deplibs_CXX=yes if test "$GXX" = yes; then case $host_os in aix4.[012]|aix4.[012].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && \ strings "$collect2name" | grep resolve_lib_name >/dev/null then # We have reworked collect2 : else # We have old collect2 hardcode_direct_CXX=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking hardcode_minus_L_CXX=yes hardcode_libdir_flag_spec_CXX='-L$libdir' hardcode_libdir_separator_CXX= fi ;; esac shared_flag='-shared' if test "$aix_use_runtimelinking" = yes; then shared_flag="$shared_flag "'${wl}-G' fi else # not using gcc if test "$host_cpu" = ia64; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' fi fi fi # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to export. always_export_symbols_CXX=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. allow_undefined_flag_CXX='-berok' # Determine the default libpath from the value encoded in an empty executable. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && $as_test_x conftest$ac_exeext; then lt_aix_libpath_sed=' /Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/ p } }' aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" archive_expsym_cmds_CXX="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib' allow_undefined_flag_CXX="-z nodefs" archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an empty executable. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && $as_test_x conftest$ac_exeext; then lt_aix_libpath_sed=' /Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/ p } }' aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. no_undefined_flag_CXX=' ${wl}-bernotok' allow_undefined_flag_CXX=' ${wl}-berok' # Exported symbols can be pulled into shared objects from archives whole_archive_flag_spec_CXX='$convenience' archive_cmds_need_lc_CXX=yes # This is similar to how AIX traditionally builds its shared libraries. archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; beos*) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then allow_undefined_flag_CXX=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else ld_shlibs_CXX=no fi ;; chorus*) case $cc_basename in *) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; esac ;; cygwin* | mingw* | pw32*) # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless, # as there is no search path for DLLs. hardcode_libdir_flag_spec_CXX='-L$libdir' allow_undefined_flag_CXX=unsupported always_export_symbols_CXX=no enable_shared_with_static_runtimes_CXX=yes if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then cp $export_symbols $output_objdir/$soname.def; else echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else ld_shlibs_CXX=no fi ;; darwin* | rhapsody*) archive_cmds_need_lc_CXX=no hardcode_direct_CXX=no hardcode_automatic_CXX=yes hardcode_shlibpath_var_CXX=unsupported whole_archive_flag_spec_CXX='' link_all_deplibs_CXX=yes allow_undefined_flag_CXX="$_lt_dar_allow_undefined" if test "$GXX" = yes ; then output_verbose_link_cmd='echo' archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" module_expsym_cmds_CXX="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" if test "$lt_cv_apple_cc_single_mod" != "yes"; then archive_cmds_CXX="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" fi else case $cc_basename in xlc*) output_verbose_link_cmd='echo' archive_cmds_CXX='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring' module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ;; *) ld_shlibs_CXX=no ;; esac fi ;; dgux*) case $cc_basename in ec++*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; ghcx*) # Green Hills C++ Compiler # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; *) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; esac ;; freebsd[12]*) # C++ shared libraries reported to be fairly broken before switch to ELF ld_shlibs_CXX=no ;; freebsd-elf*) archive_cmds_need_lc_CXX=no ;; freebsd* | dragonfly*) # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF # conventions ld_shlibs_CXX=yes ;; gnu*) ;; hpux9*) hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' hardcode_libdir_separator_CXX=: export_dynamic_flag_spec_CXX='${wl}-E' hardcode_direct_CXX=yes hardcode_minus_L_CXX=yes # Not in the search PATH, # but as the default # location of the library. case $cc_basename in CC*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; aCC*) archive_cmds_CXX='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ;; *) if test "$GXX" = yes; then archive_cmds_CXX='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else # FIXME: insert proper C++ library support ld_shlibs_CXX=no fi ;; esac ;; hpux10*|hpux11*) if test $with_gnu_ld = no; then hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' hardcode_libdir_separator_CXX=: case $host_cpu in hppa*64*|ia64*) ;; *) export_dynamic_flag_spec_CXX='${wl}-E' ;; esac fi case $host_cpu in hppa*64*|ia64*) hardcode_direct_CXX=no hardcode_shlibpath_var_CXX=no ;; *) hardcode_direct_CXX=yes hardcode_minus_L_CXX=yes # Not in the search PATH, # but as the default # location of the library. ;; esac case $cc_basename in CC*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; aCC*) case $host_cpu in hppa*64*) archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; ia64*) archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ;; *) if test "$GXX" = yes; then if test $with_gnu_ld = no; then case $host_cpu in hppa*64*) archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; ia64*) archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac fi else # FIXME: insert proper C++ library support ld_shlibs_CXX=no fi ;; esac ;; interix[3-9]*) hardcode_direct_CXX=no hardcode_shlibpath_var_CXX=no hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' export_dynamic_flag_spec_CXX='${wl}-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; irix5* | irix6*) case $cc_basename in CC*) # SGI C++ archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' # Archives containing C++ object files must be created using # "CC -ar", where "CC" is the IRIX C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs' ;; *) if test "$GXX" = yes; then if test "$with_gnu_ld" = no; then archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib' fi fi link_all_deplibs_CXX=yes ;; esac hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator_CXX=: ;; linux* | k*bsd*-gnu) case $cc_basename in KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' hardcode_libdir_flag_spec_CXX='${wl}--rpath,$libdir' export_dynamic_flag_spec_CXX='${wl}--export-dynamic' # Archives containing C++ object files must be created using # "CC -Bstatic", where "CC" is the KAI C++ compiler. old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' ;; icpc*) # Intel C++ with_gnu_ld=yes # version 8.0 and above of icpc choke on multiply defined symbols # if we add $predep_objects and $postdep_objects, however 7.1 and # earlier do not add the objects themselves. case `$CC -V 2>&1` in *"Version 7."*) archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ;; *) # Version 8.0 or newer tmp_idyn= case $host_cpu in ia64*) tmp_idyn=' -i_dynamic';; esac archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ;; esac archive_cmds_need_lc_CXX=no hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' export_dynamic_flag_spec_CXX='${wl}--export-dynamic' whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive' ;; pgCC* | pgcpp*) # Portland Group C++ compiler archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir' export_dynamic_flag_spec_CXX='${wl}--export-dynamic' whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' ;; cxx*) # Compaq C++ archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' runpath_var=LD_RUN_PATH hardcode_libdir_flag_spec_CXX='-rpath $libdir' hardcode_libdir_separator_CXX=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 no_undefined_flag_CXX=' -zdefs' archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' archive_expsym_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' hardcode_libdir_flag_spec_CXX='-R$libdir' whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' # Not sure whether something based on # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 # would be better. output_verbose_link_cmd='echo' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs' ;; esac ;; esac ;; lynxos*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; m88k*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; mvs*) case $cc_basename in cxx*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; *) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; esac ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then archive_cmds_CXX='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' wlarc= hardcode_libdir_flag_spec_CXX='-R$libdir' hardcode_direct_CXX=yes hardcode_shlibpath_var_CXX=no fi # Workaround some broken pre-1.5 toolchains output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' ;; openbsd2*) # C++ shared libraries are fairly broken ld_shlibs_CXX=no ;; openbsd*) if test -f /usr/libexec/ld.so; then hardcode_direct_CXX=yes hardcode_shlibpath_var_CXX=no archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' export_dynamic_flag_spec_CXX='${wl}-E' whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' fi output_verbose_link_cmd='echo' else ld_shlibs_CXX=no fi ;; osf3*) case $cc_basename in KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' hardcode_libdir_separator_CXX=: # Archives containing C++ object files must be created using # "CC -Bstatic", where "CC" is the KAI C++ compiler. old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' ;; RCC*) # Rational C++ 2.4.1 # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; cxx*) allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator_CXX=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ;; *) if test "$GXX" = yes && test "$with_gnu_ld" = no; then allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator_CXX=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' else # FIXME: insert proper C++ library support ld_shlibs_CXX=no fi ;; esac ;; osf4* | osf5*) case $cc_basename in KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' hardcode_libdir_separator_CXX=: # Archives containing C++ object files must be created using # the KAI C++ compiler. old_archive_cmds_CXX='$CC -o $oldlib $oldobjs' ;; RCC*) # Rational C++ 2.4.1 # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; cxx*) allow_undefined_flag_CXX=' -expect_unresolved \*' archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ echo "-hidden">> $lib.exp~ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~ $rm $lib.exp' hardcode_libdir_flag_spec_CXX='-rpath $libdir' hardcode_libdir_separator_CXX=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ;; *) if test "$GXX" = yes && test "$with_gnu_ld" = no; then allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator_CXX=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' else # FIXME: insert proper C++ library support ld_shlibs_CXX=no fi ;; esac ;; psos*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; sunos4*) case $cc_basename in CC*) # Sun C++ 4.x # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; lcc*) # Lucid # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; *) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; esac ;; solaris*) case $cc_basename in CC*) # Sun C++ 4.2, 5.x and Centerline C++ archive_cmds_need_lc_CXX=yes no_undefined_flag_CXX=' -zdefs' archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' hardcode_libdir_flag_spec_CXX='-R$libdir' hardcode_shlibpath_var_CXX=no case $host_os in solaris2.[0-5] | solaris2.[0-5].*) ;; *) # The compiler driver will combine and reorder linker options, # but understands `-z linker_flag'. # Supported since Solaris 2.6 (maybe 2.5.1?) whole_archive_flag_spec_CXX='-z allextract$convenience -z defaultextract' ;; esac link_all_deplibs_CXX=yes output_verbose_link_cmd='echo' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs' ;; gcx*) # Green Hills C++ Compiler archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' # The C++ compiler must be used to create the archive. old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs' ;; *) # GNU C++ compiler with Solaris linker if test "$GXX" = yes && test "$with_gnu_ld" = no; then no_undefined_flag_CXX=' ${wl}-z ${wl}defs' if $CC --version | grep -v '^2\.7' > /dev/null; then archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" else # g++ 2.7 appears to require `-G' NOT `-shared' on this # platform. archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" fi hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir' case $host_os in solaris2.[0-5] | solaris2.[0-5].*) ;; *) whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' ;; esac fi ;; esac ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) no_undefined_flag_CXX='${wl}-z,text' archive_cmds_need_lc_CXX=no hardcode_shlibpath_var_CXX=no runpath_var='LD_RUN_PATH' case $cc_basename in CC*) archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; *) archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; esac ;; sysv5* | sco3.2v5* | sco5v6*) # Note: We can NOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. # For security reasons, it is highly recommended that you always # use absolute paths for naming shared libraries, and exclude the # DT_RUNPATH tag from executables and libraries. But doing so # requires that you compile everything twice, which is a pain. # So that behaviour is only enabled if SCOABSPATH is set to a # non-empty value in the environment. Most likely only useful for # creating official distributions of packages. # This is a hack until libtool officially supports absolute path # names for shared libraries. no_undefined_flag_CXX='${wl}-z,text' allow_undefined_flag_CXX='${wl}-z,nodefs' archive_cmds_need_lc_CXX=no hardcode_shlibpath_var_CXX=no hardcode_libdir_flag_spec_CXX='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' hardcode_libdir_separator_CXX=':' link_all_deplibs_CXX=yes export_dynamic_flag_spec_CXX='${wl}-Bexport' runpath_var='LD_RUN_PATH' case $cc_basename in CC*) archive_cmds_CXX='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; *) archive_cmds_CXX='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; esac ;; tandem*) case $cc_basename in NCC*) # NonStop-UX NCC 3.20 # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; *) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; esac ;; vxworks*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; *) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; esac { echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5 echo "${ECHO_T}$ld_shlibs_CXX" >&6; } test "$ld_shlibs_CXX" = no && can_build_shared=no GCC_CXX="$GXX" LD_CXX="$LD" cat > conftest.$ac_ext <&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then # Parse the compiler output and extract the necessary # objects, libraries and library flags. # Sentinel used to keep track of whether or not we are before # the conftest object file. pre_test_object_deps_done=no # The `*' in the case matches for architectures that use `case' in # $output_verbose_cmd can trigger glob expansion during the loop # eval without this substitution. output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"` for p in `eval $output_verbose_link_cmd`; do case $p in -L* | -R* | -l*) # Some compilers place space between "-{L,R}" and the path. # Remove the space. if test $p = "-L" \ || test $p = "-R"; then prev=$p continue else prev= fi if test "$pre_test_object_deps_done" = no; then case $p in -L* | -R*) # Internal compiler library paths should come after those # provided the user. The postdeps already come after the # user supplied libs so there is no need to process them. if test -z "$compiler_lib_search_path_CXX"; then compiler_lib_search_path_CXX="${prev}${p}" else compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}" fi ;; # The "-l" case would never come before the object being # linked, so don't bother handling this case. esac else if test -z "$postdeps_CXX"; then postdeps_CXX="${prev}${p}" else postdeps_CXX="${postdeps_CXX} ${prev}${p}" fi fi ;; *.$objext) # This assumes that the test object file only shows up # once in the compiler output. if test "$p" = "conftest.$objext"; then pre_test_object_deps_done=yes continue fi if test "$pre_test_object_deps_done" = no; then if test -z "$predep_objects_CXX"; then predep_objects_CXX="$p" else predep_objects_CXX="$predep_objects_CXX $p" fi else if test -z "$postdep_objects_CXX"; then postdep_objects_CXX="$p" else postdep_objects_CXX="$postdep_objects_CXX $p" fi fi ;; *) ;; # Ignore the rest. esac done # Clean up. rm -f a.out a.exe else echo "libtool.m4: error: problem compiling CXX test program" fi $rm -f confest.$objext compiler_lib_search_dirs_CXX= if test -n "$compiler_lib_search_path_CXX"; then compiler_lib_search_dirs_CXX=`echo " ${compiler_lib_search_path_CXX}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` fi # PORTME: override above test on systems where it is broken case $host_os in interix[3-9]*) # Interix 3.5 installs completely hosed .la files for C++, so rather than # hack all around it, let's just trust "g++" to DTRT. predep_objects_CXX= postdep_objects_CXX= postdeps_CXX= ;; linux*) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 # # The more standards-conforming stlport4 library is # incompatible with the Cstd library. Avoid specifying # it if it's in CXXFLAGS. Ignore libCrun as # -library=stlport4 depends on it. case " $CXX $CXXFLAGS " in *" -library=stlport4 "*) solaris_use_stlport4=yes ;; esac if test "$solaris_use_stlport4" != yes; then postdeps_CXX='-library=Cstd -library=Crun' fi ;; esac ;; solaris*) case $cc_basename in CC*) # The more standards-conforming stlport4 library is # incompatible with the Cstd library. Avoid specifying # it if it's in CXXFLAGS. Ignore libCrun as # -library=stlport4 depends on it. case " $CXX $CXXFLAGS " in *" -library=stlport4 "*) solaris_use_stlport4=yes ;; esac # Adding this requires a known-good setup of shared libraries for # Sun compiler versions before 5.6, else PIC objects from an old # archive will be linked into the output, leading to subtle bugs. if test "$solaris_use_stlport4" != yes; then postdeps_CXX='-library=Cstd -library=Crun' fi ;; esac ;; esac case " $postdeps_CXX " in *" -lc "*) archive_cmds_need_lc_CXX=no ;; esac lt_prog_compiler_wl_CXX= lt_prog_compiler_pic_CXX= lt_prog_compiler_static_CXX= { echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; } # C++ specific cases for pic, static, wl, etc. if test "$GXX" = yes; then lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_static_CXX='-static' case $host_os in aix*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor lt_prog_compiler_static_CXX='-Bstatic' fi ;; amigaos*) # FIXME: we need at least 68020 code to build shared libraries, but # adding the `-m68020' flag to GCC prevents building anything better, # like `-m68040'. lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4' ;; beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; mingw* | cygwin* | os2* | pw32*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries lt_prog_compiler_pic_CXX='-DDLL_EXPORT' ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files lt_prog_compiler_pic_CXX='-fno-common' ;; *djgpp*) # DJGPP does not support shared libraries at all lt_prog_compiler_pic_CXX= ;; interix[3-9]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. # Instead, we relocate shared libraries at runtime. ;; sysv4*MP*) if test -d /usr/nec; then lt_prog_compiler_pic_CXX=-Kconform_pic fi ;; hpux*) # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. case $host_cpu in hppa*64*|ia64*) ;; *) lt_prog_compiler_pic_CXX='-fPIC' ;; esac ;; *) lt_prog_compiler_pic_CXX='-fPIC' ;; esac else case $host_os in aix[4-9]*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor lt_prog_compiler_static_CXX='-Bstatic' else lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp' fi ;; chorus*) case $cc_basename in cxch68*) # Green Hills C++ Compiler # _LT_AC_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" ;; esac ;; darwin*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files case $cc_basename in xlc*) lt_prog_compiler_pic_CXX='-qnocommon' lt_prog_compiler_wl_CXX='-Wl,' ;; esac ;; dgux*) case $cc_basename in ec++*) lt_prog_compiler_pic_CXX='-KPIC' ;; ghcx*) # Green Hills C++ Compiler lt_prog_compiler_pic_CXX='-pic' ;; *) ;; esac ;; freebsd* | dragonfly*) # FreeBSD uses GNU C++ ;; hpux9* | hpux10* | hpux11*) case $cc_basename in CC*) lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_static_CXX='${wl}-a ${wl}archive' if test "$host_cpu" != ia64; then lt_prog_compiler_pic_CXX='+Z' fi ;; aCC*) lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_static_CXX='${wl}-a ${wl}archive' case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) lt_prog_compiler_pic_CXX='+Z' ;; esac ;; *) ;; esac ;; interix*) # This is c89, which is MS Visual C++ (no shared libs) # Anyone wants to do a port? ;; irix5* | irix6* | nonstopux*) case $cc_basename in CC*) lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_static_CXX='-non_shared' # CC pic flag -KPIC is the default. ;; *) ;; esac ;; linux* | k*bsd*-gnu) case $cc_basename in KCC*) # KAI C++ Compiler lt_prog_compiler_wl_CXX='--backend -Wl,' lt_prog_compiler_pic_CXX='-fPIC' ;; icpc* | ecpc*) # Intel C++ lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_pic_CXX='-KPIC' lt_prog_compiler_static_CXX='-static' ;; pgCC* | pgcpp*) # Portland Group C++ compiler. lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_pic_CXX='-fpic' lt_prog_compiler_static_CXX='-Bstatic' ;; cxx*) # Compaq C++ # Make sure the PIC flag is empty. It appears that all Alpha # Linux and Compaq Tru64 Unix objects are PIC. lt_prog_compiler_pic_CXX= lt_prog_compiler_static_CXX='-non_shared' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 lt_prog_compiler_pic_CXX='-KPIC' lt_prog_compiler_static_CXX='-Bstatic' lt_prog_compiler_wl_CXX='-Qoption ld ' ;; esac ;; esac ;; lynxos*) ;; m88k*) ;; mvs*) case $cc_basename in cxx*) lt_prog_compiler_pic_CXX='-W c,exportall' ;; *) ;; esac ;; netbsd* | netbsdelf*-gnu) ;; osf3* | osf4* | osf5*) case $cc_basename in KCC*) lt_prog_compiler_wl_CXX='--backend -Wl,' ;; RCC*) # Rational C++ 2.4.1 lt_prog_compiler_pic_CXX='-pic' ;; cxx*) # Digital/Compaq C++ lt_prog_compiler_wl_CXX='-Wl,' # Make sure the PIC flag is empty. It appears that all Alpha # Linux and Compaq Tru64 Unix objects are PIC. lt_prog_compiler_pic_CXX= lt_prog_compiler_static_CXX='-non_shared' ;; *) ;; esac ;; psos*) ;; solaris*) case $cc_basename in CC*) # Sun C++ 4.2, 5.x and Centerline C++ lt_prog_compiler_pic_CXX='-KPIC' lt_prog_compiler_static_CXX='-Bstatic' lt_prog_compiler_wl_CXX='-Qoption ld ' ;; gcx*) # Green Hills C++ Compiler lt_prog_compiler_pic_CXX='-PIC' ;; *) ;; esac ;; sunos4*) case $cc_basename in CC*) # Sun C++ 4.x lt_prog_compiler_pic_CXX='-pic' lt_prog_compiler_static_CXX='-Bstatic' ;; lcc*) # Lucid lt_prog_compiler_pic_CXX='-pic' ;; *) ;; esac ;; tandem*) case $cc_basename in NCC*) # NonStop-UX NCC 3.20 lt_prog_compiler_pic_CXX='-KPIC' ;; *) ;; esac ;; sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) case $cc_basename in CC*) lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_pic_CXX='-KPIC' lt_prog_compiler_static_CXX='-Bstatic' ;; esac ;; vxworks*) ;; *) lt_prog_compiler_can_build_shared_CXX=no ;; esac fi { echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_CXX" >&5 echo "${ECHO_T}$lt_prog_compiler_pic_CXX" >&6; } # # Check to make sure the PIC flag actually works. # if test -n "$lt_prog_compiler_pic_CXX"; then { echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5 echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... $ECHO_C" >&6; } if test "${lt_cv_prog_compiler_pic_works_CXX+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_prog_compiler_pic_works_CXX=no ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:13653: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 echo "$as_me:13657: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_pic_works_CXX=yes fi fi $rm conftest* fi { echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_CXX" >&5 echo "${ECHO_T}$lt_cv_prog_compiler_pic_works_CXX" >&6; } if test x"$lt_cv_prog_compiler_pic_works_CXX" = xyes; then case $lt_prog_compiler_pic_CXX in "" | " "*) ;; *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;; esac else lt_prog_compiler_pic_CXX= lt_prog_compiler_can_build_shared_CXX=no fi fi case $host_os in # For platforms which do not support PIC, -DPIC is meaningless: *djgpp*) lt_prog_compiler_pic_CXX= ;; *) lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC" ;; esac # # Check to make sure the static flag actually works. # wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\" { echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; } if test "${lt_cv_prog_compiler_static_works_CXX+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_prog_compiler_static_works_CXX=no save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS $lt_tmp_static_flag" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then # The linker can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&5 $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_static_works_CXX=yes fi else lt_cv_prog_compiler_static_works_CXX=yes fi fi $rm -r conftest* LDFLAGS="$save_LDFLAGS" fi { echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_CXX" >&5 echo "${ECHO_T}$lt_cv_prog_compiler_static_works_CXX" >&6; } if test x"$lt_cv_prog_compiler_static_works_CXX" = xyes; then : else lt_prog_compiler_static_CXX= fi { echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_prog_compiler_c_o_CXX=no $rm -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:13757: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 echo "$as_me:13761: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o_CXX=yes fi fi chmod u+w . 2>&5 $rm conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files $rm out/* && rmdir out cd .. rmdir conftest $rm conftest* fi { echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5 echo "${ECHO_T}$lt_cv_prog_compiler_c_o_CXX" >&6; } hard_links="nottested" if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then # do not overwrite the value of need_locks provided by the user { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; } hard_links=yes $rm conftest* ln conftest.a conftest.b 2>/dev/null && hard_links=no touch conftest.a ln conftest.a conftest.b 2>&5 || hard_links=no ln conftest.a conftest.b 2>/dev/null && hard_links=no { echo "$as_me:$LINENO: result: $hard_links" >&5 echo "${ECHO_T}$hard_links" >&6; } if test "$hard_links" = no; then { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} need_locks=warn fi else need_locks=no fi { echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; } export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' case $host_os in aix[4-9]*) # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm if $NM -V 2>&1 | grep 'GNU' > /dev/null; then export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' else export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' fi ;; pw32*) export_symbols_cmds_CXX="$ltdll_cmds" ;; cygwin* | mingw*) export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;/^.*[ ]__nm__/s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' ;; linux* | k*bsd*-gnu) link_all_deplibs_CXX=no ;; *) export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ;; esac exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' { echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5 echo "${ECHO_T}$ld_shlibs_CXX" >&6; } test "$ld_shlibs_CXX" = no && can_build_shared=no # # Do we need to explicitly link libc? # case "x$archive_cmds_need_lc_CXX" in x|xyes) # Assume -lc should be added archive_cmds_need_lc_CXX=yes if test "$enable_shared" = yes && test "$GCC" = yes; then case $archive_cmds_CXX in *'~'*) # FIXME: we may have to deal with multi-command sequences. ;; '$CC '*) # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; } $rm conftest* echo "$lt_simple_compile_test_code" > conftest.$ac_ext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } 2>conftest.err; then soname=conftest lib=conftest libobjs=conftest.$ac_objext deplibs= wl=$lt_prog_compiler_wl_CXX pic_flag=$lt_prog_compiler_pic_CXX compiler_flags=-v linker_flags=-v verstring= output_objdir=. libname=conftest lt_save_allow_undefined_flag=$allow_undefined_flag_CXX allow_undefined_flag_CXX= if { (eval echo "$as_me:$LINENO: \"$archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 (eval $archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } then archive_cmds_need_lc_CXX=no else archive_cmds_need_lc_CXX=yes fi allow_undefined_flag_CXX=$lt_save_allow_undefined_flag else cat conftest.err 1>&5 fi $rm conftest* { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_CXX" >&5 echo "${ECHO_T}$archive_cmds_need_lc_CXX" >&6; } ;; esac fi ;; esac { echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; } library_names_spec= libname_spec='lib$name' soname_spec= shrext_cmds=".so" postinstall_cmds= postuninstall_cmds= finish_cmds= finish_eval= shlibpath_var= shlibpath_overrides_runpath=unknown version_type=none dynamic_linker="$host_os ld.so" sys_lib_dlsearch_path_spec="/lib /usr/lib" need_lib_prefix=unknown hardcode_into_libs=no # when you set need_version to no, make sure it does not cause -set_version # flags to be left without arguments need_version=unknown case $host_os in aix3*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' shlibpath_var=LIBPATH # AIX 3 has no versioning support, so we append a major version to the name. soname_spec='${libname}${release}${shared_ext}$major' ;; aix[4-9]*) version_type=linux need_lib_prefix=no need_version=no hardcode_into_libs=yes if test "$host_cpu" = ia64; then # AIX 5 supports IA64 library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH else # With GCC up to 2.95.x, collect2 would create an import file # for dependence libraries. The import file would start with # the line `#! .'. This would cause the generated library to # depend on `.', always an invalid library. This was fixed in # development snapshots of GCC prior to 3.0. case $host_os in aix4 | aix4.[01] | aix4.[01].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then : else can_build_shared=no fi ;; esac # AIX (on Power*) has no versioning support, so currently we can not hardcode correct # soname into executable. Probably we can add versioning support to # collect2, so additional links can be useful in future. if test "$aix_use_runtimelinking" = yes; then # If using run time linking (on AIX 4.2 or later) use lib.so # instead of lib.a to let people know that these are not # typical AIX shared libraries. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' else # We preserve .a as extension for shared libraries through AIX4.2 # and later when we are not doing run time linking. library_names_spec='${libname}${release}.a $libname.a' soname_spec='${libname}${release}${shared_ext}$major' fi shlibpath_var=LIBPATH fi ;; amigaos*) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; beos*) library_names_spec='${libname}${shared_ext}' dynamic_linker="$host_os ld.so" shlibpath_var=LIBRARY_PATH ;; bsdi[45]*) version_type=linux need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" # the default ld.so.conf also contains /usr/contrib/lib and # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow # libtool to hard-code these into programs ;; cygwin* | mingw* | pw32*) version_type=windows shrext_cmds=".dll" need_version=no need_lib_prefix=no case $GCC,$host_os in yes,cygwin* | yes,mingw* | yes,pw32*) library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname~ chmod a+x \$dldir/$dlname' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $rm \$dlpath' shlibpath_overrides_runpath=yes case $host_os in cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" ;; mingw*) # MinGW DLLs use traditional 'lib' prefix soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then # It is most probably a Windows format PATH printed by # mingw gcc, but we are running on Cygwin. Gcc prints its search # path with ; separators, and with drive letters. We can handle the # drive letters (cygwin fileutils understands them), so leave them, # especially as we might pass files found there to a mingw objdump, # which wouldn't understand a cygwinified path. Ahh. sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` else sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; esac ;; *) library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' ;; esac dynamic_linker='Win32 ld.exe' # FIXME: first we should search . and the directory the executable is in shlibpath_var=PATH ;; darwin* | rhapsody*) dynamic_linker="$host_os dyld" version_type=darwin need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' soname_spec='${libname}${release}${major}$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ;; dgux*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; freebsd1*) dynamic_linker=no ;; freebsd* | dragonfly*) # DragonFly does not have aout. When/if they implement a new # versioning mechanism, adjust this. if test -x /usr/bin/objformat; then objformat=`/usr/bin/objformat` else case $host_os in freebsd[123]*) objformat=aout ;; *) objformat=elf ;; esac fi version_type=freebsd-$objformat case $version_type in freebsd-elf*) library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' need_version=no need_lib_prefix=no ;; freebsd-*) library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' need_version=yes ;; esac shlibpath_var=LD_LIBRARY_PATH case $host_os in freebsd2*) shlibpath_overrides_runpath=yes ;; freebsd3.[01]* | freebsdelf3.[01]*) shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; *) # from 4.6 on, and DragonFly shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; esac ;; gnu*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH hardcode_into_libs=yes ;; hpux9* | hpux10* | hpux11*) # Give a soname corresponding to the major version so that dld.sl refuses to # link against other versions. version_type=sunos need_lib_prefix=no need_version=no case $host_cpu in ia64*) shrext_cmds='.so' hardcode_into_libs=yes dynamic_linker="$host_os dld.so" shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' if test "X$HPUX_IA64_MODE" = X32; then sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" else sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" fi sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; hppa*64*) shrext_cmds='.sl' hardcode_into_libs=yes dynamic_linker="$host_os dld.sl" shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; *) shrext_cmds='.sl' dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' ;; esac # HP-UX runs *really* slowly unless shared libraries are mode 555. postinstall_cmds='chmod 555 $lib' ;; interix[3-9]*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; irix5* | irix6* | nonstopux*) case $host_os in nonstopux*) version_type=nonstopux ;; *) if test "$lt_cv_prog_gnu_ld" = yes; then version_type=linux else version_type=irix fi ;; esac need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' case $host_os in irix5* | nonstopux*) libsuff= shlibsuff= ;; *) case $LD in # libtool.m4 will add one of these switches to LD *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= libmagic=32-bit;; *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 libmagic=64-bit;; *) libsuff= shlibsuff= libmagic=never-match;; esac ;; esac shlibpath_var=LD_LIBRARY${shlibsuff}_PATH shlibpath_overrides_runpath=no sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" hardcode_into_libs=yes ;; # No shared lib support for Linux oldld, aout, or coff. linux*oldld* | linux*aout* | linux*coff*) dynamic_linker=no ;; # This must be Linux ELF. linux* | k*bsd*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" fi # We used to test for /lib/ld.so.1 and disable shared libraries on # powerpc, because MkLinux only supported shared libraries with the # GNU dynamic linker. Since this was broken with cross compilers, # most powerpc-linux boxes support dynamic linking these days and # people can always --disable-shared, the test was removed, and we # assume the GNU/Linux dynamic linker is in use. dynamic_linker='GNU/Linux ld.so' ;; netbsdelf*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='NetBSD ld.elf_so' ;; netbsd*) version_type=sunos need_lib_prefix=no need_version=no if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='NetBSD ld.elf_so' fi shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; newsos6) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; nto-qnx*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; openbsd*) version_type=sunos sys_lib_dlsearch_path_spec="/usr/lib" need_lib_prefix=no # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. case $host_os in openbsd3.3 | openbsd3.3.*) need_version=yes ;; *) need_version=no ;; esac library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then case $host_os in openbsd2.[89] | openbsd2.[89].*) shlibpath_overrides_runpath=no ;; *) shlibpath_overrides_runpath=yes ;; esac else shlibpath_overrides_runpath=yes fi ;; os2*) libname_spec='$name' shrext_cmds=".dll" need_lib_prefix=no library_names_spec='$libname${shared_ext} $libname.a' dynamic_linker='OS/2 ld.exe' shlibpath_var=LIBPATH ;; osf3* | osf4* | osf5*) version_type=osf need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ;; rdos*) dynamic_linker=no ;; solaris*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes # ldd complains unless libraries are executable postinstall_cmds='chmod +x $lib' ;; sunos4*) version_type=sunos library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes if test "$with_gnu_ld" = yes; then need_lib_prefix=no fi need_version=yes ;; sysv4 | sysv4.3*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH case $host_vendor in sni) shlibpath_overrides_runpath=no need_lib_prefix=no export_dynamic_flag_spec='${wl}-Blargedynsym' runpath_var=LD_RUN_PATH ;; siemens) need_lib_prefix=no ;; motorola) need_lib_prefix=no need_version=no shlibpath_overrides_runpath=no sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ;; esac ;; sysv4*MP*) if test -d /usr/nec ;then version_type=linux library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' soname_spec='$libname${shared_ext}.$major' shlibpath_var=LD_LIBRARY_PATH fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) version_type=freebsd-elf need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH hardcode_into_libs=yes if test "$with_gnu_ld" = yes; then sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' shlibpath_overrides_runpath=no else sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' shlibpath_overrides_runpath=yes case $host_os in sco3.2v5*) sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ;; esac fi sys_lib_dlsearch_path_spec='/usr/lib' ;; uts4*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; *) dynamic_linker=no ;; esac { echo "$as_me:$LINENO: result: $dynamic_linker" >&5 echo "${ECHO_T}$dynamic_linker" >&6; } test "$dynamic_linker" = no && can_build_shared=no if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec" fi sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec" fi sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" variables_saved_for_relink="PATH $shlibpath_var $runpath_var" if test "$GCC" = yes; then variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi { echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; } hardcode_action_CXX= if test -n "$hardcode_libdir_flag_spec_CXX" || \ test -n "$runpath_var_CXX" || \ test "X$hardcode_automatic_CXX" = "Xyes" ; then # We can hardcode non-existant directories. if test "$hardcode_direct_CXX" != no && # If the only mechanism to avoid hardcoding is shlibpath_var, we # have to relink, otherwise we might link with an installed library # when we should be linking with a yet-to-be-installed one ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, CXX)" != no && test "$hardcode_minus_L_CXX" != no; then # Linking always hardcodes the temporary library directory. hardcode_action_CXX=relink else # We can link without hardcoding, and we can hardcode nonexisting dirs. hardcode_action_CXX=immediate fi else # We cannot hardcode anything, or else we can only hardcode existing # directories. hardcode_action_CXX=unsupported fi { echo "$as_me:$LINENO: result: $hardcode_action_CXX" >&5 echo "${ECHO_T}$hardcode_action_CXX" >&6; } if test "$hardcode_action_CXX" = relink; then # Fast installation is not supported enable_fast_install=no elif test "$shlibpath_overrides_runpath" = yes || test "$enable_shared" = no; then # Fast installation is not necessary enable_fast_install=needless fi # The else clause should only fire when bootstrapping the # libtool distribution, otherwise you forgot to ship ltmain.sh # with your package, and you will get complaints that there are # no rules to generate ltmain.sh. if test -f "$ltmain"; then # See if we are running on zsh, and set the options which allow our commands through # without removal of \ escapes. if test -n "${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi # Now quote all the things that may contain metacharacters while being # careful not to overquote the AC_SUBSTed values. We take copies of the # variables and quote the copies for generation of the libtool script. for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ SED SHELL STRIP \ libname_spec library_names_spec soname_spec extract_expsyms_cmds \ old_striplib striplib file_magic_cmd finish_cmds finish_eval \ deplibs_check_method reload_flag reload_cmds need_locks \ lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ lt_cv_sys_global_symbol_to_c_name_address \ sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ old_postinstall_cmds old_postuninstall_cmds \ compiler_CXX \ CC_CXX \ LD_CXX \ lt_prog_compiler_wl_CXX \ lt_prog_compiler_pic_CXX \ lt_prog_compiler_static_CXX \ lt_prog_compiler_no_builtin_flag_CXX \ export_dynamic_flag_spec_CXX \ thread_safe_flag_spec_CXX \ whole_archive_flag_spec_CXX \ enable_shared_with_static_runtimes_CXX \ old_archive_cmds_CXX \ old_archive_from_new_cmds_CXX \ predep_objects_CXX \ postdep_objects_CXX \ predeps_CXX \ postdeps_CXX \ compiler_lib_search_path_CXX \ compiler_lib_search_dirs_CXX \ archive_cmds_CXX \ archive_expsym_cmds_CXX \ postinstall_cmds_CXX \ postuninstall_cmds_CXX \ old_archive_from_expsyms_cmds_CXX \ allow_undefined_flag_CXX \ no_undefined_flag_CXX \ export_symbols_cmds_CXX \ hardcode_libdir_flag_spec_CXX \ hardcode_libdir_flag_spec_ld_CXX \ hardcode_libdir_separator_CXX \ hardcode_automatic_CXX \ module_cmds_CXX \ module_expsym_cmds_CXX \ lt_cv_prog_compiler_c_o_CXX \ fix_srcfile_path_CXX \ exclude_expsyms_CXX \ include_expsyms_CXX; do case $var in old_archive_cmds_CXX | \ old_archive_from_new_cmds_CXX | \ archive_cmds_CXX | \ archive_expsym_cmds_CXX | \ module_cmds_CXX | \ module_expsym_cmds_CXX | \ old_archive_from_expsyms_cmds_CXX | \ export_symbols_cmds_CXX | \ extract_expsyms_cmds | reload_cmds | finish_cmds | \ postinstall_cmds | postuninstall_cmds | \ old_postinstall_cmds | old_postuninstall_cmds | \ sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) # Double-quote double-evaled strings. eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" ;; *) eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" ;; esac done case $lt_echo in *'\$0 --fallback-echo"') lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` ;; esac cfgfile="$ofile" cat <<__EOF__ >> "$cfgfile" # ### BEGIN LIBTOOL TAG CONFIG: $tagname # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: # Shell to use when invoking shell scripts. SHELL=$lt_SHELL # Whether or not to build shared libraries. build_libtool_libs=$enable_shared # Whether or not to build static libraries. build_old_libs=$enable_static # Whether or not to add -lc for building shared libraries. build_libtool_need_lc=$archive_cmds_need_lc_CXX # Whether or not to disallow shared libs when runtime libs are static allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX # Whether or not to optimize for fast installation. fast_install=$enable_fast_install # The host system. host_alias=$host_alias host=$host host_os=$host_os # The build system. build_alias=$build_alias build=$build build_os=$build_os # An echo program that does not interpret backslashes. echo=$lt_echo # The archiver. AR=$lt_AR AR_FLAGS=$lt_AR_FLAGS # A C compiler. LTCC=$lt_LTCC # LTCC compiler flags. LTCFLAGS=$lt_LTCFLAGS # A language-specific compiler. CC=$lt_compiler_CXX # Is the compiler the GNU C compiler? with_gcc=$GCC_CXX # An ERE matcher. EGREP=$lt_EGREP # The linker used to build libraries. LD=$lt_LD_CXX # Whether we need hard or soft links. LN_S=$lt_LN_S # A BSD-compatible nm program. NM=$lt_NM # A symbol stripping program STRIP=$lt_STRIP # Used to examine libraries when file_magic_cmd begins "file" MAGIC_CMD=$MAGIC_CMD # Used on cygwin: DLL creation program. DLLTOOL="$DLLTOOL" # Used on cygwin: object dumper. OBJDUMP="$OBJDUMP" # Used on cygwin: assembler. AS="$AS" # The name of the directory that contains temporary libtool files. objdir=$objdir # How to create reloadable object files. reload_flag=$lt_reload_flag reload_cmds=$lt_reload_cmds # How to pass a linker flag through the compiler. wl=$lt_lt_prog_compiler_wl_CXX # Object file suffix (normally "o"). objext="$ac_objext" # Old archive suffix (normally "a"). libext="$libext" # Shared library suffix (normally ".so"). shrext_cmds='$shrext_cmds' # Executable file suffix (normally ""). exeext="$exeext" # Additional compiler flags for building library objects. pic_flag=$lt_lt_prog_compiler_pic_CXX pic_mode=$pic_mode # What is the maximum length of a command? max_cmd_len=$lt_cv_sys_max_cmd_len # Does compiler simultaneously support -c and -o options? compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX # Must we lock files when doing compilation? need_locks=$lt_need_locks # Do we need the lib prefix for modules? need_lib_prefix=$need_lib_prefix # Do we need a version for libraries? need_version=$need_version # Whether dlopen is supported. dlopen_support=$enable_dlopen # Whether dlopen of programs is supported. dlopen_self=$enable_dlopen_self # Whether dlopen of statically linked programs is supported. dlopen_self_static=$enable_dlopen_self_static # Compiler flag to prevent dynamic linking. link_static_flag=$lt_lt_prog_compiler_static_CXX # Compiler flag to turn off builtin functions. no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX # Compiler flag to allow reflexive dlopens. export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX # Compiler flag to generate shared objects directly from archives. whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX # Compiler flag to generate thread-safe objects. thread_safe_flag_spec=$lt_thread_safe_flag_spec_CXX # Library versioning type. version_type=$version_type # Format of library name prefix. libname_spec=$lt_libname_spec # List of archive names. First name is the real one, the rest are links. # The last name is the one that the linker finds with -lNAME. library_names_spec=$lt_library_names_spec # The coded name of the library, if different from the real name. soname_spec=$lt_soname_spec # Commands used to build and install an old-style archive. RANLIB=$lt_RANLIB old_archive_cmds=$lt_old_archive_cmds_CXX old_postinstall_cmds=$lt_old_postinstall_cmds old_postuninstall_cmds=$lt_old_postuninstall_cmds # Create an old-style archive from a shared archive. old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX # Create a temporary old-style archive to link instead of a shared archive. old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX # Commands used to build and install a shared archive. archive_cmds=$lt_archive_cmds_CXX archive_expsym_cmds=$lt_archive_expsym_cmds_CXX postinstall_cmds=$lt_postinstall_cmds postuninstall_cmds=$lt_postuninstall_cmds # Commands used to build a loadable module (assumed same as above if empty) module_cmds=$lt_module_cmds_CXX module_expsym_cmds=$lt_module_expsym_cmds_CXX # Commands to strip libraries. old_striplib=$lt_old_striplib striplib=$lt_striplib # Dependencies to place before the objects being linked to create a # shared library. predep_objects=$lt_predep_objects_CXX # Dependencies to place after the objects being linked to create a # shared library. postdep_objects=$lt_postdep_objects_CXX # Dependencies to place before the objects being linked to create a # shared library. predeps=$lt_predeps_CXX # Dependencies to place after the objects being linked to create a # shared library. postdeps=$lt_postdeps_CXX # The directories searched by this compiler when creating a shared # library compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_CXX # The library search path used internally by the compiler when linking # a shared library. compiler_lib_search_path=$lt_compiler_lib_search_path_CXX # Method to check whether dependent libraries are shared objects. deplibs_check_method=$lt_deplibs_check_method # Command to use when deplibs_check_method == file_magic. file_magic_cmd=$lt_file_magic_cmd # Flag that allows shared libraries with undefined symbols to be built. allow_undefined_flag=$lt_allow_undefined_flag_CXX # Flag that forces no undefined symbols. no_undefined_flag=$lt_no_undefined_flag_CXX # Commands used to finish a libtool library installation in a directory. finish_cmds=$lt_finish_cmds # Same as above, but a single script fragment to be evaled but not shown. finish_eval=$lt_finish_eval # Take the output of nm and produce a listing of raw symbols and C names. global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe # Transform the output of nm in a proper C declaration global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl # Transform the output of nm in a C name address pair global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. runpath_var=$runpath_var # This is the shared library path variable. shlibpath_var=$shlibpath_var # Is shlibpath searched before the hard-coded library search path? shlibpath_overrides_runpath=$shlibpath_overrides_runpath # How to hardcode a shared library path into an executable. hardcode_action=$hardcode_action_CXX # Whether we should hardcode library paths into libraries. hardcode_into_libs=$hardcode_into_libs # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX # Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the # resulting binary. hardcode_direct=$hardcode_direct_CXX # Set to yes if using the -LDIR flag during linking hardcodes DIR into the # resulting binary. hardcode_minus_L=$hardcode_minus_L_CXX # Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into # the resulting binary. hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX # Set to yes if building a shared library automatically hardcodes DIR into the library # and all subsequent libraries and executables linked against it. hardcode_automatic=$hardcode_automatic_CXX # Variables whose values should be saved in libtool wrapper scripts and # restored at relink time. variables_saved_for_relink="$variables_saved_for_relink" # Whether libtool must link a program against all its dependency libraries. link_all_deplibs=$link_all_deplibs_CXX # Compile-time system search path for libraries sys_lib_search_path_spec=$lt_sys_lib_search_path_spec # Run-time system search path for libraries sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec # Fix the shell variable \$srcfile for the compiler. fix_srcfile_path=$lt_fix_srcfile_path # Set to yes if exported symbols are required. always_export_symbols=$always_export_symbols_CXX # The commands to list exported symbols. export_symbols_cmds=$lt_export_symbols_cmds_CXX # The commands to extract the exported symbol list from a shared archive. extract_expsyms_cmds=$lt_extract_expsyms_cmds # Symbols that should not be listed in the preloaded symbols. exclude_expsyms=$lt_exclude_expsyms_CXX # Symbols that must always be exported. include_expsyms=$lt_include_expsyms_CXX # ### END LIBTOOL TAG CONFIG: $tagname __EOF__ else # If there is no Makefile yet, we rely on a make rule to execute # `config.status --recheck' to rerun these tests and create the # libtool script then. ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` if test -f "$ltmain_in"; then test -f Makefile && make "$ltmain" fi fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu CC=$lt_save_CC LDCXX=$LD LD=$lt_save_LD GCC=$lt_save_GCC with_gnu_ldcxx=$with_gnu_ld with_gnu_ld=$lt_save_with_gnu_ld lt_cv_path_LDCXX=$lt_cv_path_LD lt_cv_path_LD=$lt_save_path_LD lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld else tagname="" fi ;; F77) if test -n "$F77" && test "X$F77" != "Xno"; then ac_ext=f ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5' ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_f77_compiler_gnu archive_cmds_need_lc_F77=no allow_undefined_flag_F77= always_export_symbols_F77=no archive_expsym_cmds_F77= export_dynamic_flag_spec_F77= hardcode_direct_F77=no hardcode_libdir_flag_spec_F77= hardcode_libdir_flag_spec_ld_F77= hardcode_libdir_separator_F77= hardcode_minus_L_F77=no hardcode_automatic_F77=no module_cmds_F77= module_expsym_cmds_F77= link_all_deplibs_F77=unknown old_archive_cmds_F77=$old_archive_cmds no_undefined_flag_F77= whole_archive_flag_spec_F77= enable_shared_with_static_runtimes_F77=no # Source file extension for f77 test sources. ac_ext=f # Object file extension for compiled f77 test sources. objext=o objext_F77=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="\ subroutine t return end " # Code to be used in simple link tests lt_simple_link_test_code="\ program t end " # ltmain only uses $CC for tagged configurations so make sure $CC is set. # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} # If no C compiler flags were specified, use CFLAGS. LTCFLAGS=${LTCFLAGS-"$CFLAGS"} # Allow CC to be a program name with arguments. compiler=$CC # save warnings/boilerplate of simple test code ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" >conftest.$ac_ext eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_compiler_boilerplate=`cat conftest.err` $rm conftest* ac_outfile=conftest.$ac_objext echo "$lt_simple_link_test_code" >conftest.$ac_ext eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_linker_boilerplate=`cat conftest.err` $rm -r conftest* # Allow CC to be a program name with arguments. lt_save_CC="$CC" CC=${F77-"f77"} compiler=$CC compiler_F77=$CC for cc_temp in $compiler""; do case $cc_temp in compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; \-*) ;; *) break;; esac done cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` { echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; } { echo "$as_me:$LINENO: result: $can_build_shared" >&5 echo "${ECHO_T}$can_build_shared" >&6; } { echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; } test "$can_build_shared" = "no" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix[4-9]*) if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then test "$enable_shared" = yes && enable_static=no fi ;; esac { echo "$as_me:$LINENO: result: $enable_shared" >&5 echo "${ECHO_T}$enable_shared" >&6; } { echo "$as_me:$LINENO: checking whether to build static libraries" >&5 echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; } # Make sure either enable_shared or enable_static is yes. test "$enable_shared" = yes || enable_static=yes { echo "$as_me:$LINENO: result: $enable_static" >&5 echo "${ECHO_T}$enable_static" >&6; } GCC_F77="$G77" LD_F77="$LD" lt_prog_compiler_wl_F77= lt_prog_compiler_pic_F77= lt_prog_compiler_static_F77= { echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; } if test "$GCC" = yes; then lt_prog_compiler_wl_F77='-Wl,' lt_prog_compiler_static_F77='-static' case $host_os in aix*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor lt_prog_compiler_static_F77='-Bstatic' fi ;; amigaos*) # FIXME: we need at least 68020 code to build shared libraries, but # adding the `-m68020' flag to GCC prevents building anything better, # like `-m68040'. lt_prog_compiler_pic_F77='-m68020 -resident32 -malways-restore-a4' ;; beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; mingw* | cygwin* | pw32* | os2*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries lt_prog_compiler_pic_F77='-DDLL_EXPORT' ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files lt_prog_compiler_pic_F77='-fno-common' ;; interix[3-9]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. # Instead, we relocate shared libraries at runtime. ;; msdosdjgpp*) # Just because we use GCC doesn't mean we suddenly get shared libraries # on systems that don't support them. lt_prog_compiler_can_build_shared_F77=no enable_shared=no ;; sysv4*MP*) if test -d /usr/nec; then lt_prog_compiler_pic_F77=-Kconform_pic fi ;; hpux*) # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) lt_prog_compiler_pic_F77='-fPIC' ;; esac ;; *) lt_prog_compiler_pic_F77='-fPIC' ;; esac else # PORTME Check for flag to pass linker flags through the system compiler. case $host_os in aix*) lt_prog_compiler_wl_F77='-Wl,' if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor lt_prog_compiler_static_F77='-Bstatic' else lt_prog_compiler_static_F77='-bnso -bI:/lib/syscalls.exp' fi ;; darwin*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files case $cc_basename in xlc*) lt_prog_compiler_pic_F77='-qnocommon' lt_prog_compiler_wl_F77='-Wl,' ;; esac ;; mingw* | cygwin* | pw32* | os2*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). lt_prog_compiler_pic_F77='-DDLL_EXPORT' ;; hpux9* | hpux10* | hpux11*) lt_prog_compiler_wl_F77='-Wl,' # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) lt_prog_compiler_pic_F77='+Z' ;; esac # Is there a better lt_prog_compiler_static that works with the bundled CC? lt_prog_compiler_static_F77='${wl}-a ${wl}archive' ;; irix5* | irix6* | nonstopux*) lt_prog_compiler_wl_F77='-Wl,' # PIC (with -KPIC) is the default. lt_prog_compiler_static_F77='-non_shared' ;; newsos6) lt_prog_compiler_pic_F77='-KPIC' lt_prog_compiler_static_F77='-Bstatic' ;; linux* | k*bsd*-gnu) case $cc_basename in icc* | ecc*) lt_prog_compiler_wl_F77='-Wl,' lt_prog_compiler_pic_F77='-KPIC' lt_prog_compiler_static_F77='-static' ;; pgcc* | pgf77* | pgf90* | pgf95*) # Portland Group compilers (*not* the Pentium gcc compiler, # which looks to be a dead project) lt_prog_compiler_wl_F77='-Wl,' lt_prog_compiler_pic_F77='-fpic' lt_prog_compiler_static_F77='-Bstatic' ;; ccc*) lt_prog_compiler_wl_F77='-Wl,' # All Alpha code is PIC. lt_prog_compiler_static_F77='-non_shared' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 lt_prog_compiler_pic_F77='-KPIC' lt_prog_compiler_static_F77='-Bstatic' lt_prog_compiler_wl_F77='-Wl,' ;; *Sun\ F*) # Sun Fortran 8.3 passes all unrecognized flags to the linker lt_prog_compiler_pic_F77='-KPIC' lt_prog_compiler_static_F77='-Bstatic' lt_prog_compiler_wl_F77='' ;; esac ;; esac ;; osf3* | osf4* | osf5*) lt_prog_compiler_wl_F77='-Wl,' # All OSF/1 code is PIC. lt_prog_compiler_static_F77='-non_shared' ;; rdos*) lt_prog_compiler_static_F77='-non_shared' ;; solaris*) lt_prog_compiler_pic_F77='-KPIC' lt_prog_compiler_static_F77='-Bstatic' case $cc_basename in f77* | f90* | f95*) lt_prog_compiler_wl_F77='-Qoption ld ';; *) lt_prog_compiler_wl_F77='-Wl,';; esac ;; sunos4*) lt_prog_compiler_wl_F77='-Qoption ld ' lt_prog_compiler_pic_F77='-PIC' lt_prog_compiler_static_F77='-Bstatic' ;; sysv4 | sysv4.2uw2* | sysv4.3*) lt_prog_compiler_wl_F77='-Wl,' lt_prog_compiler_pic_F77='-KPIC' lt_prog_compiler_static_F77='-Bstatic' ;; sysv4*MP*) if test -d /usr/nec ;then lt_prog_compiler_pic_F77='-Kconform_pic' lt_prog_compiler_static_F77='-Bstatic' fi ;; sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) lt_prog_compiler_wl_F77='-Wl,' lt_prog_compiler_pic_F77='-KPIC' lt_prog_compiler_static_F77='-Bstatic' ;; unicos*) lt_prog_compiler_wl_F77='-Wl,' lt_prog_compiler_can_build_shared_F77=no ;; uts4*) lt_prog_compiler_pic_F77='-pic' lt_prog_compiler_static_F77='-Bstatic' ;; *) lt_prog_compiler_can_build_shared_F77=no ;; esac fi { echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_F77" >&5 echo "${ECHO_T}$lt_prog_compiler_pic_F77" >&6; } # # Check to make sure the PIC flag actually works. # if test -n "$lt_prog_compiler_pic_F77"; then { echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works" >&5 echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works... $ECHO_C" >&6; } if test "${lt_cv_prog_compiler_pic_works_F77+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_prog_compiler_pic_works_F77=no ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="$lt_prog_compiler_pic_F77" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:15355: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 echo "$as_me:15359: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_pic_works_F77=yes fi fi $rm conftest* fi { echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_F77" >&5 echo "${ECHO_T}$lt_cv_prog_compiler_pic_works_F77" >&6; } if test x"$lt_cv_prog_compiler_pic_works_F77" = xyes; then case $lt_prog_compiler_pic_F77 in "" | " "*) ;; *) lt_prog_compiler_pic_F77=" $lt_prog_compiler_pic_F77" ;; esac else lt_prog_compiler_pic_F77= lt_prog_compiler_can_build_shared_F77=no fi fi case $host_os in # For platforms which do not support PIC, -DPIC is meaningless: *djgpp*) lt_prog_compiler_pic_F77= ;; *) lt_prog_compiler_pic_F77="$lt_prog_compiler_pic_F77" ;; esac # # Check to make sure the static flag actually works. # wl=$lt_prog_compiler_wl_F77 eval lt_tmp_static_flag=\"$lt_prog_compiler_static_F77\" { echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; } if test "${lt_cv_prog_compiler_static_works_F77+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_prog_compiler_static_works_F77=no save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS $lt_tmp_static_flag" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then # The linker can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&5 $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_static_works_F77=yes fi else lt_cv_prog_compiler_static_works_F77=yes fi fi $rm -r conftest* LDFLAGS="$save_LDFLAGS" fi { echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_F77" >&5 echo "${ECHO_T}$lt_cv_prog_compiler_static_works_F77" >&6; } if test x"$lt_cv_prog_compiler_static_works_F77" = xyes; then : else lt_prog_compiler_static_F77= fi { echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } if test "${lt_cv_prog_compiler_c_o_F77+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_prog_compiler_c_o_F77=no $rm -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:15459: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 echo "$as_me:15463: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o_F77=yes fi fi chmod u+w . 2>&5 $rm conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files $rm out/* && rmdir out cd .. rmdir conftest $rm conftest* fi { echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_F77" >&5 echo "${ECHO_T}$lt_cv_prog_compiler_c_o_F77" >&6; } hard_links="nottested" if test "$lt_cv_prog_compiler_c_o_F77" = no && test "$need_locks" != no; then # do not overwrite the value of need_locks provided by the user { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; } hard_links=yes $rm conftest* ln conftest.a conftest.b 2>/dev/null && hard_links=no touch conftest.a ln conftest.a conftest.b 2>&5 || hard_links=no ln conftest.a conftest.b 2>/dev/null && hard_links=no { echo "$as_me:$LINENO: result: $hard_links" >&5 echo "${ECHO_T}$hard_links" >&6; } if test "$hard_links" = no; then { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} need_locks=warn fi else need_locks=no fi { echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; } runpath_var= allow_undefined_flag_F77= enable_shared_with_static_runtimes_F77=no archive_cmds_F77= archive_expsym_cmds_F77= old_archive_From_new_cmds_F77= old_archive_from_expsyms_cmds_F77= export_dynamic_flag_spec_F77= whole_archive_flag_spec_F77= thread_safe_flag_spec_F77= hardcode_libdir_flag_spec_F77= hardcode_libdir_flag_spec_ld_F77= hardcode_libdir_separator_F77= hardcode_direct_F77=no hardcode_minus_L_F77=no hardcode_shlibpath_var_F77=unsupported link_all_deplibs_F77=unknown hardcode_automatic_F77=no module_cmds_F77= module_expsym_cmds_F77= always_export_symbols_F77=no export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' # include_expsyms should be a list of space-separated symbols to be *always* # included in the symbol list include_expsyms_F77= # exclude_expsyms can be an extended regexp of symbols to exclude # it will be wrapped by ` (' and `)$', so one must not match beginning or # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', # as well as any symbol that contains `d'. exclude_expsyms_F77='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out # platforms (ab)use it in PIC code, but their linkers get confused if # the symbol is explicitly referenced. Since portable code cannot # rely on this symbol name, it's probably fine to never include it in # preloaded symbol tables. # Exclude shared library initialization/finalization symbols. extract_expsyms_cmds= # Just being paranoid about ensuring that cc_basename is set. for cc_temp in $compiler""; do case $cc_temp in compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; \-*) ;; *) break;; esac done cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` case $host_os in cygwin* | mingw* | pw32*) # FIXME: the MSVC++ port hasn't been tested in a loooong time # When not using gcc, we currently assume that we are using # Microsoft Visual C++. if test "$GCC" != yes; then with_gnu_ld=no fi ;; interix*) # we just hope/assume this is gcc and not c89 (= MSVC++) with_gnu_ld=yes ;; openbsd*) with_gnu_ld=no ;; esac ld_shlibs_F77=yes if test "$with_gnu_ld" = yes; then # If archive_cmds runs LD, not CC, wlarc should be empty wlarc='${wl}' # Set some defaults for GNU ld with shared library support. These # are reset later if shared libraries are not supported. Putting them # here allows them to be overridden if necessary. runpath_var=LD_RUN_PATH hardcode_libdir_flag_spec_F77='${wl}--rpath ${wl}$libdir' export_dynamic_flag_spec_F77='${wl}--export-dynamic' # ancient GNU ld didn't support --whole-archive et. al. if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then whole_archive_flag_spec_F77="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else whole_archive_flag_spec_F77= fi supports_anon_versioning=no case `$LD -v 2>/dev/null` in *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... *\ 2.11.*) ;; # other 2.11 versions *) supports_anon_versioning=yes ;; esac # See if GNU ld supports shared libraries. case $host_os in aix[3-9]*) # On AIX/PPC, the GNU linker is very broken if test "$host_cpu" != ia64; then ld_shlibs_F77=no cat <&2 *** Warning: the GNU linker, at least up to release 2.9.1, is reported *** to be unable to reliably create shared libraries on AIX. *** Therefore, libtool is disabling shared libraries support. If you *** really care for shared libraries, you may want to modify your PATH *** so that a non-GNU linker is found, and then restart. EOF fi ;; amigaos*) archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' hardcode_libdir_flag_spec_F77='-L$libdir' hardcode_minus_L_F77=yes # Samuel A. Falvo II reports # that the semantics of dynamic libraries on AmigaOS, at least up # to version 4, is to share data among multiple programs linked # with the same dynamic library. Since this doesn't match the # behavior of shared libraries on other platforms, we can't use # them. ld_shlibs_F77=no ;; beos*) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then allow_undefined_flag_F77=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME archive_cmds_F77='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else ld_shlibs_F77=no fi ;; cygwin* | mingw* | pw32*) # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, F77) is actually meaningless, # as there is no search path for DLLs. hardcode_libdir_flag_spec_F77='-L$libdir' allow_undefined_flag_F77=unsupported always_export_symbols_F77=no enable_shared_with_static_runtimes_F77=yes export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... archive_expsym_cmds_F77='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then cp $export_symbols $output_objdir/$soname.def; else echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else ld_shlibs_F77=no fi ;; interix[3-9]*) hardcode_direct_F77=no hardcode_shlibpath_var_F77=no hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir' export_dynamic_flag_spec_F77='${wl}-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. archive_cmds_F77='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' archive_expsym_cmds_F77='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; gnu* | linux* | k*bsd*-gnu) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then tmp_addflag= case $cc_basename,$host_cpu in pgcc*) # Portland Group C compiler whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag' ;; pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag -Mnomain' ;; ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 tmp_addflag=' -i_dynamic' ;; efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 tmp_addflag=' -i_dynamic -nofor_main' ;; ifc* | ifort*) # Intel Fortran compiler tmp_addflag=' -nofor_main' ;; esac case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 whole_archive_flag_spec_F77='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' tmp_sharedflag='-G' ;; *Sun\ F*) # Sun Fortran 8.3 tmp_sharedflag='-G' ;; *) tmp_sharedflag='-shared' ;; esac archive_cmds_F77='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' if test $supports_anon_versioning = yes; then archive_expsym_cmds_F77='$echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ $echo "local: *; };" >> $output_objdir/$libname.ver~ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' fi link_all_deplibs_F77=no else ld_shlibs_F77=no fi ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then archive_cmds_F77='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' fi ;; solaris*) if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then ld_shlibs_F77=no cat <&2 *** Warning: The releases 2.8.* of the GNU linker cannot reliably *** create shared libraries on Solaris systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.9.1 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. EOF elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs_F77=no fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) case `$LD -v 2>&1` in *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) ld_shlibs_F77=no cat <<_LT_EOF 1>&2 *** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not *** reliably create shared libraries on SCO systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.16.91.0.3 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. _LT_EOF ;; *) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' else ld_shlibs_F77=no fi ;; esac ;; sunos4*) archive_cmds_F77='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' wlarc= hardcode_direct_F77=yes hardcode_shlibpath_var_F77=no ;; *) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs_F77=no fi ;; esac if test "$ld_shlibs_F77" = no; then runpath_var= hardcode_libdir_flag_spec_F77= export_dynamic_flag_spec_F77= whole_archive_flag_spec_F77= fi else # PORTME fill in a description of your system's linker (not GNU ld) case $host_os in aix3*) allow_undefined_flag_F77=unsupported always_export_symbols_F77=yes archive_expsym_cmds_F77='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' # Note: this linker hardcodes the directories in LIBPATH if there # are no directories specified by -L. hardcode_minus_L_F77=yes if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then # Neither direct hardcoding nor static linking is supported with a # broken collect2. hardcode_direct_F77=unsupported fi ;; aix[4-9]*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag="" else # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm if $NM -V 2>&1 | grep 'GNU' > /dev/null; then export_symbols_cmds_F77='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' else export_symbols_cmds_F77='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' fi aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # need to do runtime linking. case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) for ld_flag in $LDFLAGS; do if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then aix_use_runtimelinking=yes break fi done ;; esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. archive_cmds_F77='' hardcode_direct_F77=yes hardcode_libdir_separator_F77=':' link_all_deplibs_F77=yes if test "$GCC" = yes; then case $host_os in aix4.[012]|aix4.[012].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && \ strings "$collect2name" | grep resolve_lib_name >/dev/null then # We have reworked collect2 : else # We have old collect2 hardcode_direct_F77=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking hardcode_minus_L_F77=yes hardcode_libdir_flag_spec_F77='-L$libdir' hardcode_libdir_separator_F77= fi ;; esac shared_flag='-shared' if test "$aix_use_runtimelinking" = yes; then shared_flag="$shared_flag "'${wl}-G' fi else # not using gcc if test "$host_cpu" = ia64; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' fi fi fi # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to export. always_export_symbols_F77=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. allow_undefined_flag_F77='-berok' # Determine the default libpath from the value encoded in an empty executable. cat >conftest.$ac_ext <<_ACEOF program main end _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_f77_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && $as_test_x conftest$ac_exeext; then lt_aix_libpath_sed=' /Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/ p } }' aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath" archive_expsym_cmds_F77="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then hardcode_libdir_flag_spec_F77='${wl}-R $libdir:/usr/lib:/lib' allow_undefined_flag_F77="-z nodefs" archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an empty executable. cat >conftest.$ac_ext <<_ACEOF program main end _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_f77_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && $as_test_x conftest$ac_exeext; then lt_aix_libpath_sed=' /Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/ p } }' aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. no_undefined_flag_F77=' ${wl}-bernotok' allow_undefined_flag_F77=' ${wl}-berok' # Exported symbols can be pulled into shared objects from archives whole_archive_flag_spec_F77='$convenience' archive_cmds_need_lc_F77=yes # This is similar to how AIX traditionally builds its shared libraries. archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; amigaos*) archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' hardcode_libdir_flag_spec_F77='-L$libdir' hardcode_minus_L_F77=yes # see comment about different semantics on the GNU ld section ld_shlibs_F77=no ;; bsdi[45]*) export_dynamic_flag_spec_F77=-rdynamic ;; cygwin* | mingw* | pw32*) # When not using gcc, we currently assume that we are using # Microsoft Visual C++. # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. hardcode_libdir_flag_spec_F77=' ' allow_undefined_flag_F77=unsupported # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. archive_cmds_F77='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' # The linker will automatically build a .lib file if we build a DLL. old_archive_From_new_cmds_F77='true' # FIXME: Should let the user specify the lib program. old_archive_cmds_F77='lib -OUT:$oldlib$oldobjs$old_deplibs' fix_srcfile_path_F77='`cygpath -w "$srcfile"`' enable_shared_with_static_runtimes_F77=yes ;; darwin* | rhapsody*) case $host_os in rhapsody* | darwin1.[012]) allow_undefined_flag_F77='${wl}-undefined ${wl}suppress' ;; *) # Darwin 1.3 on if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' else case ${MACOSX_DEPLOYMENT_TARGET} in 10.[012]) allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; 10.*) allow_undefined_flag_F77='${wl}-undefined ${wl}dynamic_lookup' ;; esac fi ;; esac archive_cmds_need_lc_F77=no hardcode_direct_F77=no hardcode_automatic_F77=yes hardcode_shlibpath_var_F77=unsupported whole_archive_flag_spec_F77='' link_all_deplibs_F77=yes if test "$GCC" = yes ; then output_verbose_link_cmd='echo' archive_cmds_F77="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" module_cmds_F77="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" archive_expsym_cmds_F77="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" module_expsym_cmds_F77="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" else case $cc_basename in xlc*) output_verbose_link_cmd='echo' archive_cmds_F77='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring' module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ;; *) ld_shlibs_F77=no ;; esac fi ;; dgux*) archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec_F77='-L$libdir' hardcode_shlibpath_var_F77=no ;; freebsd1*) ld_shlibs_F77=no ;; # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor # support. Future versions do this automatically, but an explicit c++rt0.o # does not break anything, and helps significantly (at the cost of a little # extra space). freebsd2.2*) archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' hardcode_libdir_flag_spec_F77='-R$libdir' hardcode_direct_F77=yes hardcode_shlibpath_var_F77=no ;; # Unfortunately, older versions of FreeBSD 2 do not have this feature. freebsd2*) archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' hardcode_direct_F77=yes hardcode_minus_L_F77=yes hardcode_shlibpath_var_F77=no ;; # FreeBSD 3 and greater uses gcc -shared to do shared libraries. freebsd* | dragonfly*) archive_cmds_F77='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' hardcode_libdir_flag_spec_F77='-R$libdir' hardcode_direct_F77=yes hardcode_shlibpath_var_F77=no ;; hpux9*) if test "$GCC" = yes; then archive_cmds_F77='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else archive_cmds_F77='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' fi hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' hardcode_libdir_separator_F77=: hardcode_direct_F77=yes # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L_F77=yes export_dynamic_flag_spec_F77='${wl}-E' ;; hpux10*) if test "$GCC" = yes -a "$with_gnu_ld" = no; then archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds_F77='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi if test "$with_gnu_ld" = no; then hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' hardcode_libdir_separator_F77=: hardcode_direct_F77=yes export_dynamic_flag_spec_F77='${wl}-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L_F77=yes fi ;; hpux11*) if test "$GCC" = yes -a "$with_gnu_ld" = no; then case $host_cpu in hppa*64*) archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac else case $host_cpu in hppa*64*) archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac fi if test "$with_gnu_ld" = no; then hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' hardcode_libdir_separator_F77=: case $host_cpu in hppa*64*|ia64*) hardcode_libdir_flag_spec_ld_F77='+b $libdir' hardcode_direct_F77=no hardcode_shlibpath_var_F77=no ;; *) hardcode_direct_F77=yes export_dynamic_flag_spec_F77='${wl}-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L_F77=yes ;; esac fi ;; irix5* | irix6* | nonstopux*) if test "$GCC" = yes; then archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else archive_cmds_F77='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' hardcode_libdir_flag_spec_ld_F77='-rpath $libdir' fi hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator_F77=: link_all_deplibs_F77=yes ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out else archive_cmds_F77='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF fi hardcode_libdir_flag_spec_F77='-R$libdir' hardcode_direct_F77=yes hardcode_shlibpath_var_F77=no ;; newsos6) archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct_F77=yes hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator_F77=: hardcode_shlibpath_var_F77=no ;; openbsd*) if test -f /usr/libexec/ld.so; then hardcode_direct_F77=yes hardcode_shlibpath_var_F77=no if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir' export_dynamic_flag_spec_F77='${wl}-E' else case $host_os in openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec_F77='-R$libdir' ;; *) archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir' ;; esac fi else ld_shlibs_F77=no fi ;; os2*) hardcode_libdir_flag_spec_F77='-L$libdir' hardcode_minus_L_F77=yes allow_undefined_flag_F77=unsupported archive_cmds_F77='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' old_archive_From_new_cmds_F77='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ;; osf3*) if test "$GCC" = yes; then allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*' archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else allow_undefined_flag_F77=' -expect_unresolved \*' archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' fi hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator_F77=: ;; osf4* | osf5*) # as osf3* with the addition of -msym flag if test "$GCC" = yes; then allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*' archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' else allow_undefined_flag_F77=' -expect_unresolved \*' archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' archive_expsym_cmds_F77='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' # Both c and cxx compiler support -rpath directly hardcode_libdir_flag_spec_F77='-rpath $libdir' fi hardcode_libdir_separator_F77=: ;; solaris*) no_undefined_flag_F77=' -z text' if test "$GCC" = yes; then wlarc='${wl}' archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' else wlarc='' archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' fi hardcode_libdir_flag_spec_F77='-R$libdir' hardcode_shlibpath_var_F77=no case $host_os in solaris2.[0-5] | solaris2.[0-5].*) ;; *) # The compiler driver will combine and reorder linker options, # but understands `-z linker_flag'. GCC discards it without `$wl', # but is careful enough not to reorder. # Supported since Solaris 2.6 (maybe 2.5.1?) if test "$GCC" = yes; then whole_archive_flag_spec_F77='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' else whole_archive_flag_spec_F77='-z allextract$convenience -z defaultextract' fi ;; esac link_all_deplibs_F77=yes ;; sunos4*) if test "x$host_vendor" = xsequent; then # Use $CC to link under sequent, because it throws in some extra .o # files that make .init and .fini sections work. archive_cmds_F77='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds_F77='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' fi hardcode_libdir_flag_spec_F77='-L$libdir' hardcode_direct_F77=yes hardcode_minus_L_F77=yes hardcode_shlibpath_var_F77=no ;; sysv4) case $host_vendor in sni) archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct_F77=yes # is this really true??? ;; siemens) ## LD is ld it makes a PLAMLIB ## CC just makes a GrossModule. archive_cmds_F77='$LD -G -o $lib $libobjs $deplibs $linker_flags' reload_cmds_F77='$CC -r -o $output$reload_objs' hardcode_direct_F77=no ;; motorola) archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct_F77=no #Motorola manual says yes, but my tests say they lie ;; esac runpath_var='LD_RUN_PATH' hardcode_shlibpath_var_F77=no ;; sysv4.3*) archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_shlibpath_var_F77=no export_dynamic_flag_spec_F77='-Bexport' ;; sysv4*MP*) if test -d /usr/nec; then archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_shlibpath_var_F77=no runpath_var=LD_RUN_PATH hardcode_runpath_var=yes ld_shlibs_F77=yes fi ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) no_undefined_flag_F77='${wl}-z,text' archive_cmds_need_lc_F77=no hardcode_shlibpath_var_F77=no runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then archive_cmds_F77='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds_F77='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; sysv5* | sco3.2v5* | sco5v6*) # Note: We can NOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. no_undefined_flag_F77='${wl}-z,text' allow_undefined_flag_F77='${wl}-z,nodefs' archive_cmds_need_lc_F77=no hardcode_shlibpath_var_F77=no hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' hardcode_libdir_separator_F77=':' link_all_deplibs_F77=yes export_dynamic_flag_spec_F77='${wl}-Bexport' runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then archive_cmds_F77='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds_F77='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; uts4*) archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec_F77='-L$libdir' hardcode_shlibpath_var_F77=no ;; *) ld_shlibs_F77=no ;; esac fi { echo "$as_me:$LINENO: result: $ld_shlibs_F77" >&5 echo "${ECHO_T}$ld_shlibs_F77" >&6; } test "$ld_shlibs_F77" = no && can_build_shared=no # # Do we need to explicitly link libc? # case "x$archive_cmds_need_lc_F77" in x|xyes) # Assume -lc should be added archive_cmds_need_lc_F77=yes if test "$enable_shared" = yes && test "$GCC" = yes; then case $archive_cmds_F77 in *'~'*) # FIXME: we may have to deal with multi-command sequences. ;; '$CC '*) # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; } $rm conftest* echo "$lt_simple_compile_test_code" > conftest.$ac_ext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } 2>conftest.err; then soname=conftest lib=conftest libobjs=conftest.$ac_objext deplibs= wl=$lt_prog_compiler_wl_F77 pic_flag=$lt_prog_compiler_pic_F77 compiler_flags=-v linker_flags=-v verstring= output_objdir=. libname=conftest lt_save_allow_undefined_flag=$allow_undefined_flag_F77 allow_undefined_flag_F77= if { (eval echo "$as_me:$LINENO: \"$archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 (eval $archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } then archive_cmds_need_lc_F77=no else archive_cmds_need_lc_F77=yes fi allow_undefined_flag_F77=$lt_save_allow_undefined_flag else cat conftest.err 1>&5 fi $rm conftest* { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_F77" >&5 echo "${ECHO_T}$archive_cmds_need_lc_F77" >&6; } ;; esac fi ;; esac { echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; } library_names_spec= libname_spec='lib$name' soname_spec= shrext_cmds=".so" postinstall_cmds= postuninstall_cmds= finish_cmds= finish_eval= shlibpath_var= shlibpath_overrides_runpath=unknown version_type=none dynamic_linker="$host_os ld.so" sys_lib_dlsearch_path_spec="/lib /usr/lib" need_lib_prefix=unknown hardcode_into_libs=no # when you set need_version to no, make sure it does not cause -set_version # flags to be left without arguments need_version=unknown case $host_os in aix3*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' shlibpath_var=LIBPATH # AIX 3 has no versioning support, so we append a major version to the name. soname_spec='${libname}${release}${shared_ext}$major' ;; aix[4-9]*) version_type=linux need_lib_prefix=no need_version=no hardcode_into_libs=yes if test "$host_cpu" = ia64; then # AIX 5 supports IA64 library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH else # With GCC up to 2.95.x, collect2 would create an import file # for dependence libraries. The import file would start with # the line `#! .'. This would cause the generated library to # depend on `.', always an invalid library. This was fixed in # development snapshots of GCC prior to 3.0. case $host_os in aix4 | aix4.[01] | aix4.[01].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then : else can_build_shared=no fi ;; esac # AIX (on Power*) has no versioning support, so currently we can not hardcode correct # soname into executable. Probably we can add versioning support to # collect2, so additional links can be useful in future. if test "$aix_use_runtimelinking" = yes; then # If using run time linking (on AIX 4.2 or later) use lib.so # instead of lib.a to let people know that these are not # typical AIX shared libraries. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' else # We preserve .a as extension for shared libraries through AIX4.2 # and later when we are not doing run time linking. library_names_spec='${libname}${release}.a $libname.a' soname_spec='${libname}${release}${shared_ext}$major' fi shlibpath_var=LIBPATH fi ;; amigaos*) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; beos*) library_names_spec='${libname}${shared_ext}' dynamic_linker="$host_os ld.so" shlibpath_var=LIBRARY_PATH ;; bsdi[45]*) version_type=linux need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" # the default ld.so.conf also contains /usr/contrib/lib and # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow # libtool to hard-code these into programs ;; cygwin* | mingw* | pw32*) version_type=windows shrext_cmds=".dll" need_version=no need_lib_prefix=no case $GCC,$host_os in yes,cygwin* | yes,mingw* | yes,pw32*) library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname~ chmod a+x \$dldir/$dlname' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $rm \$dlpath' shlibpath_overrides_runpath=yes case $host_os in cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" ;; mingw*) # MinGW DLLs use traditional 'lib' prefix soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then # It is most probably a Windows format PATH printed by # mingw gcc, but we are running on Cygwin. Gcc prints its search # path with ; separators, and with drive letters. We can handle the # drive letters (cygwin fileutils understands them), so leave them, # especially as we might pass files found there to a mingw objdump, # which wouldn't understand a cygwinified path. Ahh. sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` else sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; esac ;; *) library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' ;; esac dynamic_linker='Win32 ld.exe' # FIXME: first we should search . and the directory the executable is in shlibpath_var=PATH ;; darwin* | rhapsody*) dynamic_linker="$host_os dyld" version_type=darwin need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' soname_spec='${libname}${release}${major}$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ;; dgux*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; freebsd1*) dynamic_linker=no ;; freebsd* | dragonfly*) # DragonFly does not have aout. When/if they implement a new # versioning mechanism, adjust this. if test -x /usr/bin/objformat; then objformat=`/usr/bin/objformat` else case $host_os in freebsd[123]*) objformat=aout ;; *) objformat=elf ;; esac fi version_type=freebsd-$objformat case $version_type in freebsd-elf*) library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' need_version=no need_lib_prefix=no ;; freebsd-*) library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' need_version=yes ;; esac shlibpath_var=LD_LIBRARY_PATH case $host_os in freebsd2*) shlibpath_overrides_runpath=yes ;; freebsd3.[01]* | freebsdelf3.[01]*) shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; *) # from 4.6 on, and DragonFly shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; esac ;; gnu*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH hardcode_into_libs=yes ;; hpux9* | hpux10* | hpux11*) # Give a soname corresponding to the major version so that dld.sl refuses to # link against other versions. version_type=sunos need_lib_prefix=no need_version=no case $host_cpu in ia64*) shrext_cmds='.so' hardcode_into_libs=yes dynamic_linker="$host_os dld.so" shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' if test "X$HPUX_IA64_MODE" = X32; then sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" else sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" fi sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; hppa*64*) shrext_cmds='.sl' hardcode_into_libs=yes dynamic_linker="$host_os dld.sl" shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; *) shrext_cmds='.sl' dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' ;; esac # HP-UX runs *really* slowly unless shared libraries are mode 555. postinstall_cmds='chmod 555 $lib' ;; interix[3-9]*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; irix5* | irix6* | nonstopux*) case $host_os in nonstopux*) version_type=nonstopux ;; *) if test "$lt_cv_prog_gnu_ld" = yes; then version_type=linux else version_type=irix fi ;; esac need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' case $host_os in irix5* | nonstopux*) libsuff= shlibsuff= ;; *) case $LD in # libtool.m4 will add one of these switches to LD *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= libmagic=32-bit;; *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 libmagic=64-bit;; *) libsuff= shlibsuff= libmagic=never-match;; esac ;; esac shlibpath_var=LD_LIBRARY${shlibsuff}_PATH shlibpath_overrides_runpath=no sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" hardcode_into_libs=yes ;; # No shared lib support for Linux oldld, aout, or coff. linux*oldld* | linux*aout* | linux*coff*) dynamic_linker=no ;; # This must be Linux ELF. linux* | k*bsd*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" fi # We used to test for /lib/ld.so.1 and disable shared libraries on # powerpc, because MkLinux only supported shared libraries with the # GNU dynamic linker. Since this was broken with cross compilers, # most powerpc-linux boxes support dynamic linking these days and # people can always --disable-shared, the test was removed, and we # assume the GNU/Linux dynamic linker is in use. dynamic_linker='GNU/Linux ld.so' ;; netbsdelf*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='NetBSD ld.elf_so' ;; netbsd*) version_type=sunos need_lib_prefix=no need_version=no if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='NetBSD ld.elf_so' fi shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; newsos6) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; nto-qnx*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; openbsd*) version_type=sunos sys_lib_dlsearch_path_spec="/usr/lib" need_lib_prefix=no # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. case $host_os in openbsd3.3 | openbsd3.3.*) need_version=yes ;; *) need_version=no ;; esac library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then case $host_os in openbsd2.[89] | openbsd2.[89].*) shlibpath_overrides_runpath=no ;; *) shlibpath_overrides_runpath=yes ;; esac else shlibpath_overrides_runpath=yes fi ;; os2*) libname_spec='$name' shrext_cmds=".dll" need_lib_prefix=no library_names_spec='$libname${shared_ext} $libname.a' dynamic_linker='OS/2 ld.exe' shlibpath_var=LIBPATH ;; osf3* | osf4* | osf5*) version_type=osf need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ;; rdos*) dynamic_linker=no ;; solaris*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes # ldd complains unless libraries are executable postinstall_cmds='chmod +x $lib' ;; sunos4*) version_type=sunos library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes if test "$with_gnu_ld" = yes; then need_lib_prefix=no fi need_version=yes ;; sysv4 | sysv4.3*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH case $host_vendor in sni) shlibpath_overrides_runpath=no need_lib_prefix=no export_dynamic_flag_spec='${wl}-Blargedynsym' runpath_var=LD_RUN_PATH ;; siemens) need_lib_prefix=no ;; motorola) need_lib_prefix=no need_version=no shlibpath_overrides_runpath=no sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ;; esac ;; sysv4*MP*) if test -d /usr/nec ;then version_type=linux library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' soname_spec='$libname${shared_ext}.$major' shlibpath_var=LD_LIBRARY_PATH fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) version_type=freebsd-elf need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH hardcode_into_libs=yes if test "$with_gnu_ld" = yes; then sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' shlibpath_overrides_runpath=no else sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' shlibpath_overrides_runpath=yes case $host_os in sco3.2v5*) sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ;; esac fi sys_lib_dlsearch_path_spec='/usr/lib' ;; uts4*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; *) dynamic_linker=no ;; esac { echo "$as_me:$LINENO: result: $dynamic_linker" >&5 echo "${ECHO_T}$dynamic_linker" >&6; } test "$dynamic_linker" = no && can_build_shared=no if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec" fi sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec" fi sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" variables_saved_for_relink="PATH $shlibpath_var $runpath_var" if test "$GCC" = yes; then variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi { echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; } hardcode_action_F77= if test -n "$hardcode_libdir_flag_spec_F77" || \ test -n "$runpath_var_F77" || \ test "X$hardcode_automatic_F77" = "Xyes" ; then # We can hardcode non-existant directories. if test "$hardcode_direct_F77" != no && # If the only mechanism to avoid hardcoding is shlibpath_var, we # have to relink, otherwise we might link with an installed library # when we should be linking with a yet-to-be-installed one ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, F77)" != no && test "$hardcode_minus_L_F77" != no; then # Linking always hardcodes the temporary library directory. hardcode_action_F77=relink else # We can link without hardcoding, and we can hardcode nonexisting dirs. hardcode_action_F77=immediate fi else # We cannot hardcode anything, or else we can only hardcode existing # directories. hardcode_action_F77=unsupported fi { echo "$as_me:$LINENO: result: $hardcode_action_F77" >&5 echo "${ECHO_T}$hardcode_action_F77" >&6; } if test "$hardcode_action_F77" = relink; then # Fast installation is not supported enable_fast_install=no elif test "$shlibpath_overrides_runpath" = yes || test "$enable_shared" = no; then # Fast installation is not necessary enable_fast_install=needless fi # The else clause should only fire when bootstrapping the # libtool distribution, otherwise you forgot to ship ltmain.sh # with your package, and you will get complaints that there are # no rules to generate ltmain.sh. if test -f "$ltmain"; then # See if we are running on zsh, and set the options which allow our commands through # without removal of \ escapes. if test -n "${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi # Now quote all the things that may contain metacharacters while being # careful not to overquote the AC_SUBSTed values. We take copies of the # variables and quote the copies for generation of the libtool script. for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ SED SHELL STRIP \ libname_spec library_names_spec soname_spec extract_expsyms_cmds \ old_striplib striplib file_magic_cmd finish_cmds finish_eval \ deplibs_check_method reload_flag reload_cmds need_locks \ lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ lt_cv_sys_global_symbol_to_c_name_address \ sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ old_postinstall_cmds old_postuninstall_cmds \ compiler_F77 \ CC_F77 \ LD_F77 \ lt_prog_compiler_wl_F77 \ lt_prog_compiler_pic_F77 \ lt_prog_compiler_static_F77 \ lt_prog_compiler_no_builtin_flag_F77 \ export_dynamic_flag_spec_F77 \ thread_safe_flag_spec_F77 \ whole_archive_flag_spec_F77 \ enable_shared_with_static_runtimes_F77 \ old_archive_cmds_F77 \ old_archive_from_new_cmds_F77 \ predep_objects_F77 \ postdep_objects_F77 \ predeps_F77 \ postdeps_F77 \ compiler_lib_search_path_F77 \ compiler_lib_search_dirs_F77 \ archive_cmds_F77 \ archive_expsym_cmds_F77 \ postinstall_cmds_F77 \ postuninstall_cmds_F77 \ old_archive_from_expsyms_cmds_F77 \ allow_undefined_flag_F77 \ no_undefined_flag_F77 \ export_symbols_cmds_F77 \ hardcode_libdir_flag_spec_F77 \ hardcode_libdir_flag_spec_ld_F77 \ hardcode_libdir_separator_F77 \ hardcode_automatic_F77 \ module_cmds_F77 \ module_expsym_cmds_F77 \ lt_cv_prog_compiler_c_o_F77 \ fix_srcfile_path_F77 \ exclude_expsyms_F77 \ include_expsyms_F77; do case $var in old_archive_cmds_F77 | \ old_archive_from_new_cmds_F77 | \ archive_cmds_F77 | \ archive_expsym_cmds_F77 | \ module_cmds_F77 | \ module_expsym_cmds_F77 | \ old_archive_from_expsyms_cmds_F77 | \ export_symbols_cmds_F77 | \ extract_expsyms_cmds | reload_cmds | finish_cmds | \ postinstall_cmds | postuninstall_cmds | \ old_postinstall_cmds | old_postuninstall_cmds | \ sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) # Double-quote double-evaled strings. eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" ;; *) eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" ;; esac done case $lt_echo in *'\$0 --fallback-echo"') lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` ;; esac cfgfile="$ofile" cat <<__EOF__ >> "$cfgfile" # ### BEGIN LIBTOOL TAG CONFIG: $tagname # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: # Shell to use when invoking shell scripts. SHELL=$lt_SHELL # Whether or not to build shared libraries. build_libtool_libs=$enable_shared # Whether or not to build static libraries. build_old_libs=$enable_static # Whether or not to add -lc for building shared libraries. build_libtool_need_lc=$archive_cmds_need_lc_F77 # Whether or not to disallow shared libs when runtime libs are static allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_F77 # Whether or not to optimize for fast installation. fast_install=$enable_fast_install # The host system. host_alias=$host_alias host=$host host_os=$host_os # The build system. build_alias=$build_alias build=$build build_os=$build_os # An echo program that does not interpret backslashes. echo=$lt_echo # The archiver. AR=$lt_AR AR_FLAGS=$lt_AR_FLAGS # A C compiler. LTCC=$lt_LTCC # LTCC compiler flags. LTCFLAGS=$lt_LTCFLAGS # A language-specific compiler. CC=$lt_compiler_F77 # Is the compiler the GNU C compiler? with_gcc=$GCC_F77 # An ERE matcher. EGREP=$lt_EGREP # The linker used to build libraries. LD=$lt_LD_F77 # Whether we need hard or soft links. LN_S=$lt_LN_S # A BSD-compatible nm program. NM=$lt_NM # A symbol stripping program STRIP=$lt_STRIP # Used to examine libraries when file_magic_cmd begins "file" MAGIC_CMD=$MAGIC_CMD # Used on cygwin: DLL creation program. DLLTOOL="$DLLTOOL" # Used on cygwin: object dumper. OBJDUMP="$OBJDUMP" # Used on cygwin: assembler. AS="$AS" # The name of the directory that contains temporary libtool files. objdir=$objdir # How to create reloadable object files. reload_flag=$lt_reload_flag reload_cmds=$lt_reload_cmds # How to pass a linker flag through the compiler. wl=$lt_lt_prog_compiler_wl_F77 # Object file suffix (normally "o"). objext="$ac_objext" # Old archive suffix (normally "a"). libext="$libext" # Shared library suffix (normally ".so"). shrext_cmds='$shrext_cmds' # Executable file suffix (normally ""). exeext="$exeext" # Additional compiler flags for building library objects. pic_flag=$lt_lt_prog_compiler_pic_F77 pic_mode=$pic_mode # What is the maximum length of a command? max_cmd_len=$lt_cv_sys_max_cmd_len # Does compiler simultaneously support -c and -o options? compiler_c_o=$lt_lt_cv_prog_compiler_c_o_F77 # Must we lock files when doing compilation? need_locks=$lt_need_locks # Do we need the lib prefix for modules? need_lib_prefix=$need_lib_prefix # Do we need a version for libraries? need_version=$need_version # Whether dlopen is supported. dlopen_support=$enable_dlopen # Whether dlopen of programs is supported. dlopen_self=$enable_dlopen_self # Whether dlopen of statically linked programs is supported. dlopen_self_static=$enable_dlopen_self_static # Compiler flag to prevent dynamic linking. link_static_flag=$lt_lt_prog_compiler_static_F77 # Compiler flag to turn off builtin functions. no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_F77 # Compiler flag to allow reflexive dlopens. export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_F77 # Compiler flag to generate shared objects directly from archives. whole_archive_flag_spec=$lt_whole_archive_flag_spec_F77 # Compiler flag to generate thread-safe objects. thread_safe_flag_spec=$lt_thread_safe_flag_spec_F77 # Library versioning type. version_type=$version_type # Format of library name prefix. libname_spec=$lt_libname_spec # List of archive names. First name is the real one, the rest are links. # The last name is the one that the linker finds with -lNAME. library_names_spec=$lt_library_names_spec # The coded name of the library, if different from the real name. soname_spec=$lt_soname_spec # Commands used to build and install an old-style archive. RANLIB=$lt_RANLIB old_archive_cmds=$lt_old_archive_cmds_F77 old_postinstall_cmds=$lt_old_postinstall_cmds old_postuninstall_cmds=$lt_old_postuninstall_cmds # Create an old-style archive from a shared archive. old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_F77 # Create a temporary old-style archive to link instead of a shared archive. old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_F77 # Commands used to build and install a shared archive. archive_cmds=$lt_archive_cmds_F77 archive_expsym_cmds=$lt_archive_expsym_cmds_F77 postinstall_cmds=$lt_postinstall_cmds postuninstall_cmds=$lt_postuninstall_cmds # Commands used to build a loadable module (assumed same as above if empty) module_cmds=$lt_module_cmds_F77 module_expsym_cmds=$lt_module_expsym_cmds_F77 # Commands to strip libraries. old_striplib=$lt_old_striplib striplib=$lt_striplib # Dependencies to place before the objects being linked to create a # shared library. predep_objects=$lt_predep_objects_F77 # Dependencies to place after the objects being linked to create a # shared library. postdep_objects=$lt_postdep_objects_F77 # Dependencies to place before the objects being linked to create a # shared library. predeps=$lt_predeps_F77 # Dependencies to place after the objects being linked to create a # shared library. postdeps=$lt_postdeps_F77 # The directories searched by this compiler when creating a shared # library compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_F77 # The library search path used internally by the compiler when linking # a shared library. compiler_lib_search_path=$lt_compiler_lib_search_path_F77 # Method to check whether dependent libraries are shared objects. deplibs_check_method=$lt_deplibs_check_method # Command to use when deplibs_check_method == file_magic. file_magic_cmd=$lt_file_magic_cmd # Flag that allows shared libraries with undefined symbols to be built. allow_undefined_flag=$lt_allow_undefined_flag_F77 # Flag that forces no undefined symbols. no_undefined_flag=$lt_no_undefined_flag_F77 # Commands used to finish a libtool library installation in a directory. finish_cmds=$lt_finish_cmds # Same as above, but a single script fragment to be evaled but not shown. finish_eval=$lt_finish_eval # Take the output of nm and produce a listing of raw symbols and C names. global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe # Transform the output of nm in a proper C declaration global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl # Transform the output of nm in a C name address pair global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. runpath_var=$runpath_var # This is the shared library path variable. shlibpath_var=$shlibpath_var # Is shlibpath searched before the hard-coded library search path? shlibpath_overrides_runpath=$shlibpath_overrides_runpath # How to hardcode a shared library path into an executable. hardcode_action=$hardcode_action_F77 # Whether we should hardcode library paths into libraries. hardcode_into_libs=$hardcode_into_libs # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_F77 # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_F77 # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator_F77 # Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the # resulting binary. hardcode_direct=$hardcode_direct_F77 # Set to yes if using the -LDIR flag during linking hardcodes DIR into the # resulting binary. hardcode_minus_L=$hardcode_minus_L_F77 # Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into # the resulting binary. hardcode_shlibpath_var=$hardcode_shlibpath_var_F77 # Set to yes if building a shared library automatically hardcodes DIR into the library # and all subsequent libraries and executables linked against it. hardcode_automatic=$hardcode_automatic_F77 # Variables whose values should be saved in libtool wrapper scripts and # restored at relink time. variables_saved_for_relink="$variables_saved_for_relink" # Whether libtool must link a program against all its dependency libraries. link_all_deplibs=$link_all_deplibs_F77 # Compile-time system search path for libraries sys_lib_search_path_spec=$lt_sys_lib_search_path_spec # Run-time system search path for libraries sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec # Fix the shell variable \$srcfile for the compiler. fix_srcfile_path=$lt_fix_srcfile_path # Set to yes if exported symbols are required. always_export_symbols=$always_export_symbols_F77 # The commands to list exported symbols. export_symbols_cmds=$lt_export_symbols_cmds_F77 # The commands to extract the exported symbol list from a shared archive. extract_expsyms_cmds=$lt_extract_expsyms_cmds # Symbols that should not be listed in the preloaded symbols. exclude_expsyms=$lt_exclude_expsyms_F77 # Symbols that must always be exported. include_expsyms=$lt_include_expsyms_F77 # ### END LIBTOOL TAG CONFIG: $tagname __EOF__ else # If there is no Makefile yet, we rely on a make rule to execute # `config.status --recheck' to rerun these tests and create the # libtool script then. ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` if test -f "$ltmain_in"; then test -f Makefile && make "$ltmain" fi fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu CC="$lt_save_CC" else tagname="" fi ;; GCJ) if test -n "$GCJ" && test "X$GCJ" != "Xno"; then # Source file extension for Java test sources. ac_ext=java # Object file extension for compiled Java test sources. objext=o objext_GCJ=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="class foo {}" # Code to be used in simple link tests lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }' # ltmain only uses $CC for tagged configurations so make sure $CC is set. # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} # If no C compiler flags were specified, use CFLAGS. LTCFLAGS=${LTCFLAGS-"$CFLAGS"} # Allow CC to be a program name with arguments. compiler=$CC # save warnings/boilerplate of simple test code ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" >conftest.$ac_ext eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_compiler_boilerplate=`cat conftest.err` $rm conftest* ac_outfile=conftest.$ac_objext echo "$lt_simple_link_test_code" >conftest.$ac_ext eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_linker_boilerplate=`cat conftest.err` $rm -r conftest* # Allow CC to be a program name with arguments. lt_save_CC="$CC" CC=${GCJ-"gcj"} compiler=$CC compiler_GCJ=$CC for cc_temp in $compiler""; do case $cc_temp in compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; \-*) ;; *) break;; esac done cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` # GCJ did not exist at the time GCC didn't implicitly link libc in. archive_cmds_need_lc_GCJ=no old_archive_cmds_GCJ=$old_archive_cmds lt_prog_compiler_no_builtin_flag_GCJ= if test "$GCC" = yes; then lt_prog_compiler_no_builtin_flag_GCJ=' -fno-builtin' { echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; } if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_prog_compiler_rtti_exceptions=no ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-fno-rtti -fno-exceptions" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:17679: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 echo "$as_me:17683: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_rtti_exceptions=yes fi fi $rm conftest* fi { echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; } if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then lt_prog_compiler_no_builtin_flag_GCJ="$lt_prog_compiler_no_builtin_flag_GCJ -fno-rtti -fno-exceptions" else : fi fi lt_prog_compiler_wl_GCJ= lt_prog_compiler_pic_GCJ= lt_prog_compiler_static_GCJ= { echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; } if test "$GCC" = yes; then lt_prog_compiler_wl_GCJ='-Wl,' lt_prog_compiler_static_GCJ='-static' case $host_os in aix*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor lt_prog_compiler_static_GCJ='-Bstatic' fi ;; amigaos*) # FIXME: we need at least 68020 code to build shared libraries, but # adding the `-m68020' flag to GCC prevents building anything better, # like `-m68040'. lt_prog_compiler_pic_GCJ='-m68020 -resident32 -malways-restore-a4' ;; beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; mingw* | cygwin* | pw32* | os2*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files lt_prog_compiler_pic_GCJ='-fno-common' ;; interix[3-9]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. # Instead, we relocate shared libraries at runtime. ;; msdosdjgpp*) # Just because we use GCC doesn't mean we suddenly get shared libraries # on systems that don't support them. lt_prog_compiler_can_build_shared_GCJ=no enable_shared=no ;; sysv4*MP*) if test -d /usr/nec; then lt_prog_compiler_pic_GCJ=-Kconform_pic fi ;; hpux*) # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) lt_prog_compiler_pic_GCJ='-fPIC' ;; esac ;; *) lt_prog_compiler_pic_GCJ='-fPIC' ;; esac else # PORTME Check for flag to pass linker flags through the system compiler. case $host_os in aix*) lt_prog_compiler_wl_GCJ='-Wl,' if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor lt_prog_compiler_static_GCJ='-Bstatic' else lt_prog_compiler_static_GCJ='-bnso -bI:/lib/syscalls.exp' fi ;; darwin*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files case $cc_basename in xlc*) lt_prog_compiler_pic_GCJ='-qnocommon' lt_prog_compiler_wl_GCJ='-Wl,' ;; esac ;; mingw* | cygwin* | pw32* | os2*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). ;; hpux9* | hpux10* | hpux11*) lt_prog_compiler_wl_GCJ='-Wl,' # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) lt_prog_compiler_pic_GCJ='+Z' ;; esac # Is there a better lt_prog_compiler_static that works with the bundled CC? lt_prog_compiler_static_GCJ='${wl}-a ${wl}archive' ;; irix5* | irix6* | nonstopux*) lt_prog_compiler_wl_GCJ='-Wl,' # PIC (with -KPIC) is the default. lt_prog_compiler_static_GCJ='-non_shared' ;; newsos6) lt_prog_compiler_pic_GCJ='-KPIC' lt_prog_compiler_static_GCJ='-Bstatic' ;; linux* | k*bsd*-gnu) case $cc_basename in icc* | ecc*) lt_prog_compiler_wl_GCJ='-Wl,' lt_prog_compiler_pic_GCJ='-KPIC' lt_prog_compiler_static_GCJ='-static' ;; pgcc* | pgf77* | pgf90* | pgf95*) # Portland Group compilers (*not* the Pentium gcc compiler, # which looks to be a dead project) lt_prog_compiler_wl_GCJ='-Wl,' lt_prog_compiler_pic_GCJ='-fpic' lt_prog_compiler_static_GCJ='-Bstatic' ;; ccc*) lt_prog_compiler_wl_GCJ='-Wl,' # All Alpha code is PIC. lt_prog_compiler_static_GCJ='-non_shared' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 lt_prog_compiler_pic_GCJ='-KPIC' lt_prog_compiler_static_GCJ='-Bstatic' lt_prog_compiler_wl_GCJ='-Wl,' ;; *Sun\ F*) # Sun Fortran 8.3 passes all unrecognized flags to the linker lt_prog_compiler_pic_GCJ='-KPIC' lt_prog_compiler_static_GCJ='-Bstatic' lt_prog_compiler_wl_GCJ='' ;; esac ;; esac ;; osf3* | osf4* | osf5*) lt_prog_compiler_wl_GCJ='-Wl,' # All OSF/1 code is PIC. lt_prog_compiler_static_GCJ='-non_shared' ;; rdos*) lt_prog_compiler_static_GCJ='-non_shared' ;; solaris*) lt_prog_compiler_pic_GCJ='-KPIC' lt_prog_compiler_static_GCJ='-Bstatic' case $cc_basename in f77* | f90* | f95*) lt_prog_compiler_wl_GCJ='-Qoption ld ';; *) lt_prog_compiler_wl_GCJ='-Wl,';; esac ;; sunos4*) lt_prog_compiler_wl_GCJ='-Qoption ld ' lt_prog_compiler_pic_GCJ='-PIC' lt_prog_compiler_static_GCJ='-Bstatic' ;; sysv4 | sysv4.2uw2* | sysv4.3*) lt_prog_compiler_wl_GCJ='-Wl,' lt_prog_compiler_pic_GCJ='-KPIC' lt_prog_compiler_static_GCJ='-Bstatic' ;; sysv4*MP*) if test -d /usr/nec ;then lt_prog_compiler_pic_GCJ='-Kconform_pic' lt_prog_compiler_static_GCJ='-Bstatic' fi ;; sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) lt_prog_compiler_wl_GCJ='-Wl,' lt_prog_compiler_pic_GCJ='-KPIC' lt_prog_compiler_static_GCJ='-Bstatic' ;; unicos*) lt_prog_compiler_wl_GCJ='-Wl,' lt_prog_compiler_can_build_shared_GCJ=no ;; uts4*) lt_prog_compiler_pic_GCJ='-pic' lt_prog_compiler_static_GCJ='-Bstatic' ;; *) lt_prog_compiler_can_build_shared_GCJ=no ;; esac fi { echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_GCJ" >&5 echo "${ECHO_T}$lt_prog_compiler_pic_GCJ" >&6; } # # Check to make sure the PIC flag actually works. # if test -n "$lt_prog_compiler_pic_GCJ"; then { echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works" >&5 echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works... $ECHO_C" >&6; } if test "${lt_cv_prog_compiler_pic_works_GCJ+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_prog_compiler_pic_works_GCJ=no ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="$lt_prog_compiler_pic_GCJ" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:17969: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 echo "$as_me:17973: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_pic_works_GCJ=yes fi fi $rm conftest* fi { echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_GCJ" >&5 echo "${ECHO_T}$lt_cv_prog_compiler_pic_works_GCJ" >&6; } if test x"$lt_cv_prog_compiler_pic_works_GCJ" = xyes; then case $lt_prog_compiler_pic_GCJ in "" | " "*) ;; *) lt_prog_compiler_pic_GCJ=" $lt_prog_compiler_pic_GCJ" ;; esac else lt_prog_compiler_pic_GCJ= lt_prog_compiler_can_build_shared_GCJ=no fi fi case $host_os in # For platforms which do not support PIC, -DPIC is meaningless: *djgpp*) lt_prog_compiler_pic_GCJ= ;; *) lt_prog_compiler_pic_GCJ="$lt_prog_compiler_pic_GCJ" ;; esac # # Check to make sure the static flag actually works. # wl=$lt_prog_compiler_wl_GCJ eval lt_tmp_static_flag=\"$lt_prog_compiler_static_GCJ\" { echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; } if test "${lt_cv_prog_compiler_static_works_GCJ+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_prog_compiler_static_works_GCJ=no save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS $lt_tmp_static_flag" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then # The linker can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&5 $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_static_works_GCJ=yes fi else lt_cv_prog_compiler_static_works_GCJ=yes fi fi $rm -r conftest* LDFLAGS="$save_LDFLAGS" fi { echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_GCJ" >&5 echo "${ECHO_T}$lt_cv_prog_compiler_static_works_GCJ" >&6; } if test x"$lt_cv_prog_compiler_static_works_GCJ" = xyes; then : else lt_prog_compiler_static_GCJ= fi { echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } if test "${lt_cv_prog_compiler_c_o_GCJ+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_prog_compiler_c_o_GCJ=no $rm -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:18073: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 echo "$as_me:18077: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o_GCJ=yes fi fi chmod u+w . 2>&5 $rm conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files $rm out/* && rmdir out cd .. rmdir conftest $rm conftest* fi { echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_GCJ" >&5 echo "${ECHO_T}$lt_cv_prog_compiler_c_o_GCJ" >&6; } hard_links="nottested" if test "$lt_cv_prog_compiler_c_o_GCJ" = no && test "$need_locks" != no; then # do not overwrite the value of need_locks provided by the user { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; } hard_links=yes $rm conftest* ln conftest.a conftest.b 2>/dev/null && hard_links=no touch conftest.a ln conftest.a conftest.b 2>&5 || hard_links=no ln conftest.a conftest.b 2>/dev/null && hard_links=no { echo "$as_me:$LINENO: result: $hard_links" >&5 echo "${ECHO_T}$hard_links" >&6; } if test "$hard_links" = no; then { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} need_locks=warn fi else need_locks=no fi { echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; } runpath_var= allow_undefined_flag_GCJ= enable_shared_with_static_runtimes_GCJ=no archive_cmds_GCJ= archive_expsym_cmds_GCJ= old_archive_From_new_cmds_GCJ= old_archive_from_expsyms_cmds_GCJ= export_dynamic_flag_spec_GCJ= whole_archive_flag_spec_GCJ= thread_safe_flag_spec_GCJ= hardcode_libdir_flag_spec_GCJ= hardcode_libdir_flag_spec_ld_GCJ= hardcode_libdir_separator_GCJ= hardcode_direct_GCJ=no hardcode_minus_L_GCJ=no hardcode_shlibpath_var_GCJ=unsupported link_all_deplibs_GCJ=unknown hardcode_automatic_GCJ=no module_cmds_GCJ= module_expsym_cmds_GCJ= always_export_symbols_GCJ=no export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' # include_expsyms should be a list of space-separated symbols to be *always* # included in the symbol list include_expsyms_GCJ= # exclude_expsyms can be an extended regexp of symbols to exclude # it will be wrapped by ` (' and `)$', so one must not match beginning or # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', # as well as any symbol that contains `d'. exclude_expsyms_GCJ='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out # platforms (ab)use it in PIC code, but their linkers get confused if # the symbol is explicitly referenced. Since portable code cannot # rely on this symbol name, it's probably fine to never include it in # preloaded symbol tables. # Exclude shared library initialization/finalization symbols. extract_expsyms_cmds= # Just being paranoid about ensuring that cc_basename is set. for cc_temp in $compiler""; do case $cc_temp in compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; \-*) ;; *) break;; esac done cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` case $host_os in cygwin* | mingw* | pw32*) # FIXME: the MSVC++ port hasn't been tested in a loooong time # When not using gcc, we currently assume that we are using # Microsoft Visual C++. if test "$GCC" != yes; then with_gnu_ld=no fi ;; interix*) # we just hope/assume this is gcc and not c89 (= MSVC++) with_gnu_ld=yes ;; openbsd*) with_gnu_ld=no ;; esac ld_shlibs_GCJ=yes if test "$with_gnu_ld" = yes; then # If archive_cmds runs LD, not CC, wlarc should be empty wlarc='${wl}' # Set some defaults for GNU ld with shared library support. These # are reset later if shared libraries are not supported. Putting them # here allows them to be overridden if necessary. runpath_var=LD_RUN_PATH hardcode_libdir_flag_spec_GCJ='${wl}--rpath ${wl}$libdir' export_dynamic_flag_spec_GCJ='${wl}--export-dynamic' # ancient GNU ld didn't support --whole-archive et. al. if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then whole_archive_flag_spec_GCJ="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else whole_archive_flag_spec_GCJ= fi supports_anon_versioning=no case `$LD -v 2>/dev/null` in *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... *\ 2.11.*) ;; # other 2.11 versions *) supports_anon_versioning=yes ;; esac # See if GNU ld supports shared libraries. case $host_os in aix[3-9]*) # On AIX/PPC, the GNU linker is very broken if test "$host_cpu" != ia64; then ld_shlibs_GCJ=no cat <&2 *** Warning: the GNU linker, at least up to release 2.9.1, is reported *** to be unable to reliably create shared libraries on AIX. *** Therefore, libtool is disabling shared libraries support. If you *** really care for shared libraries, you may want to modify your PATH *** so that a non-GNU linker is found, and then restart. EOF fi ;; amigaos*) archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' hardcode_libdir_flag_spec_GCJ='-L$libdir' hardcode_minus_L_GCJ=yes # Samuel A. Falvo II reports # that the semantics of dynamic libraries on AmigaOS, at least up # to version 4, is to share data among multiple programs linked # with the same dynamic library. Since this doesn't match the # behavior of shared libraries on other platforms, we can't use # them. ld_shlibs_GCJ=no ;; beos*) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then allow_undefined_flag_GCJ=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME archive_cmds_GCJ='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else ld_shlibs_GCJ=no fi ;; cygwin* | mingw* | pw32*) # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, GCJ) is actually meaningless, # as there is no search path for DLLs. hardcode_libdir_flag_spec_GCJ='-L$libdir' allow_undefined_flag_GCJ=unsupported always_export_symbols_GCJ=no enable_shared_with_static_runtimes_GCJ=yes export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... archive_expsym_cmds_GCJ='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then cp $export_symbols $output_objdir/$soname.def; else echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else ld_shlibs_GCJ=no fi ;; interix[3-9]*) hardcode_direct_GCJ=no hardcode_shlibpath_var_GCJ=no hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir' export_dynamic_flag_spec_GCJ='${wl}-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. archive_cmds_GCJ='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' archive_expsym_cmds_GCJ='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; gnu* | linux* | k*bsd*-gnu) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then tmp_addflag= case $cc_basename,$host_cpu in pgcc*) # Portland Group C compiler whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag' ;; pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag -Mnomain' ;; ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 tmp_addflag=' -i_dynamic' ;; efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 tmp_addflag=' -i_dynamic -nofor_main' ;; ifc* | ifort*) # Intel Fortran compiler tmp_addflag=' -nofor_main' ;; esac case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 whole_archive_flag_spec_GCJ='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' tmp_sharedflag='-G' ;; *Sun\ F*) # Sun Fortran 8.3 tmp_sharedflag='-G' ;; *) tmp_sharedflag='-shared' ;; esac archive_cmds_GCJ='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' if test $supports_anon_versioning = yes; then archive_expsym_cmds_GCJ='$echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ $echo "local: *; };" >> $output_objdir/$libname.ver~ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' fi link_all_deplibs_GCJ=no else ld_shlibs_GCJ=no fi ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then archive_cmds_GCJ='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' fi ;; solaris*) if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then ld_shlibs_GCJ=no cat <&2 *** Warning: The releases 2.8.* of the GNU linker cannot reliably *** create shared libraries on Solaris systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.9.1 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. EOF elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs_GCJ=no fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) case `$LD -v 2>&1` in *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) ld_shlibs_GCJ=no cat <<_LT_EOF 1>&2 *** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not *** reliably create shared libraries on SCO systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.16.91.0.3 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. _LT_EOF ;; *) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' else ld_shlibs_GCJ=no fi ;; esac ;; sunos4*) archive_cmds_GCJ='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' wlarc= hardcode_direct_GCJ=yes hardcode_shlibpath_var_GCJ=no ;; *) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs_GCJ=no fi ;; esac if test "$ld_shlibs_GCJ" = no; then runpath_var= hardcode_libdir_flag_spec_GCJ= export_dynamic_flag_spec_GCJ= whole_archive_flag_spec_GCJ= fi else # PORTME fill in a description of your system's linker (not GNU ld) case $host_os in aix3*) allow_undefined_flag_GCJ=unsupported always_export_symbols_GCJ=yes archive_expsym_cmds_GCJ='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' # Note: this linker hardcodes the directories in LIBPATH if there # are no directories specified by -L. hardcode_minus_L_GCJ=yes if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then # Neither direct hardcoding nor static linking is supported with a # broken collect2. hardcode_direct_GCJ=unsupported fi ;; aix[4-9]*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag="" else # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm if $NM -V 2>&1 | grep 'GNU' > /dev/null; then export_symbols_cmds_GCJ='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' else export_symbols_cmds_GCJ='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' fi aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # need to do runtime linking. case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) for ld_flag in $LDFLAGS; do if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then aix_use_runtimelinking=yes break fi done ;; esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. archive_cmds_GCJ='' hardcode_direct_GCJ=yes hardcode_libdir_separator_GCJ=':' link_all_deplibs_GCJ=yes if test "$GCC" = yes; then case $host_os in aix4.[012]|aix4.[012].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && \ strings "$collect2name" | grep resolve_lib_name >/dev/null then # We have reworked collect2 : else # We have old collect2 hardcode_direct_GCJ=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking hardcode_minus_L_GCJ=yes hardcode_libdir_flag_spec_GCJ='-L$libdir' hardcode_libdir_separator_GCJ= fi ;; esac shared_flag='-shared' if test "$aix_use_runtimelinking" = yes; then shared_flag="$shared_flag "'${wl}-G' fi else # not using gcc if test "$host_cpu" = ia64; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' fi fi fi # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to export. always_export_symbols_GCJ=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. allow_undefined_flag_GCJ='-berok' # Determine the default libpath from the value encoded in an empty executable. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && $as_test_x conftest$ac_exeext; then lt_aix_libpath_sed=' /Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/ p } }' aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath" archive_expsym_cmds_GCJ="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then hardcode_libdir_flag_spec_GCJ='${wl}-R $libdir:/usr/lib:/lib' allow_undefined_flag_GCJ="-z nodefs" archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an empty executable. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && $as_test_x conftest$ac_exeext; then lt_aix_libpath_sed=' /Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/ p } }' aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. no_undefined_flag_GCJ=' ${wl}-bernotok' allow_undefined_flag_GCJ=' ${wl}-berok' # Exported symbols can be pulled into shared objects from archives whole_archive_flag_spec_GCJ='$convenience' archive_cmds_need_lc_GCJ=yes # This is similar to how AIX traditionally builds its shared libraries. archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; amigaos*) archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' hardcode_libdir_flag_spec_GCJ='-L$libdir' hardcode_minus_L_GCJ=yes # see comment about different semantics on the GNU ld section ld_shlibs_GCJ=no ;; bsdi[45]*) export_dynamic_flag_spec_GCJ=-rdynamic ;; cygwin* | mingw* | pw32*) # When not using gcc, we currently assume that we are using # Microsoft Visual C++. # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. hardcode_libdir_flag_spec_GCJ=' ' allow_undefined_flag_GCJ=unsupported # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. archive_cmds_GCJ='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' # The linker will automatically build a .lib file if we build a DLL. old_archive_From_new_cmds_GCJ='true' # FIXME: Should let the user specify the lib program. old_archive_cmds_GCJ='lib -OUT:$oldlib$oldobjs$old_deplibs' fix_srcfile_path_GCJ='`cygpath -w "$srcfile"`' enable_shared_with_static_runtimes_GCJ=yes ;; darwin* | rhapsody*) case $host_os in rhapsody* | darwin1.[012]) allow_undefined_flag_GCJ='${wl}-undefined ${wl}suppress' ;; *) # Darwin 1.3 on if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' else case ${MACOSX_DEPLOYMENT_TARGET} in 10.[012]) allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; 10.*) allow_undefined_flag_GCJ='${wl}-undefined ${wl}dynamic_lookup' ;; esac fi ;; esac archive_cmds_need_lc_GCJ=no hardcode_direct_GCJ=no hardcode_automatic_GCJ=yes hardcode_shlibpath_var_GCJ=unsupported whole_archive_flag_spec_GCJ='' link_all_deplibs_GCJ=yes if test "$GCC" = yes ; then output_verbose_link_cmd='echo' archive_cmds_GCJ="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" module_cmds_GCJ="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" archive_expsym_cmds_GCJ="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" module_expsym_cmds_GCJ="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" else case $cc_basename in xlc*) output_verbose_link_cmd='echo' archive_cmds_GCJ='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring' module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ;; *) ld_shlibs_GCJ=no ;; esac fi ;; dgux*) archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec_GCJ='-L$libdir' hardcode_shlibpath_var_GCJ=no ;; freebsd1*) ld_shlibs_GCJ=no ;; # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor # support. Future versions do this automatically, but an explicit c++rt0.o # does not break anything, and helps significantly (at the cost of a little # extra space). freebsd2.2*) archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' hardcode_libdir_flag_spec_GCJ='-R$libdir' hardcode_direct_GCJ=yes hardcode_shlibpath_var_GCJ=no ;; # Unfortunately, older versions of FreeBSD 2 do not have this feature. freebsd2*) archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' hardcode_direct_GCJ=yes hardcode_minus_L_GCJ=yes hardcode_shlibpath_var_GCJ=no ;; # FreeBSD 3 and greater uses gcc -shared to do shared libraries. freebsd* | dragonfly*) archive_cmds_GCJ='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' hardcode_libdir_flag_spec_GCJ='-R$libdir' hardcode_direct_GCJ=yes hardcode_shlibpath_var_GCJ=no ;; hpux9*) if test "$GCC" = yes; then archive_cmds_GCJ='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else archive_cmds_GCJ='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' fi hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' hardcode_libdir_separator_GCJ=: hardcode_direct_GCJ=yes # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L_GCJ=yes export_dynamic_flag_spec_GCJ='${wl}-E' ;; hpux10*) if test "$GCC" = yes -a "$with_gnu_ld" = no; then archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds_GCJ='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi if test "$with_gnu_ld" = no; then hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' hardcode_libdir_separator_GCJ=: hardcode_direct_GCJ=yes export_dynamic_flag_spec_GCJ='${wl}-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L_GCJ=yes fi ;; hpux11*) if test "$GCC" = yes -a "$with_gnu_ld" = no; then case $host_cpu in hppa*64*) archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac else case $host_cpu in hppa*64*) archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac fi if test "$with_gnu_ld" = no; then hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' hardcode_libdir_separator_GCJ=: case $host_cpu in hppa*64*|ia64*) hardcode_libdir_flag_spec_ld_GCJ='+b $libdir' hardcode_direct_GCJ=no hardcode_shlibpath_var_GCJ=no ;; *) hardcode_direct_GCJ=yes export_dynamic_flag_spec_GCJ='${wl}-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L_GCJ=yes ;; esac fi ;; irix5* | irix6* | nonstopux*) if test "$GCC" = yes; then archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else archive_cmds_GCJ='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' hardcode_libdir_flag_spec_ld_GCJ='-rpath $libdir' fi hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator_GCJ=: link_all_deplibs_GCJ=yes ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out else archive_cmds_GCJ='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF fi hardcode_libdir_flag_spec_GCJ='-R$libdir' hardcode_direct_GCJ=yes hardcode_shlibpath_var_GCJ=no ;; newsos6) archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct_GCJ=yes hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator_GCJ=: hardcode_shlibpath_var_GCJ=no ;; openbsd*) if test -f /usr/libexec/ld.so; then hardcode_direct_GCJ=yes hardcode_shlibpath_var_GCJ=no if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir' export_dynamic_flag_spec_GCJ='${wl}-E' else case $host_os in openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec_GCJ='-R$libdir' ;; *) archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir' ;; esac fi else ld_shlibs_GCJ=no fi ;; os2*) hardcode_libdir_flag_spec_GCJ='-L$libdir' hardcode_minus_L_GCJ=yes allow_undefined_flag_GCJ=unsupported archive_cmds_GCJ='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' old_archive_From_new_cmds_GCJ='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ;; osf3*) if test "$GCC" = yes; then allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*' archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else allow_undefined_flag_GCJ=' -expect_unresolved \*' archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' fi hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator_GCJ=: ;; osf4* | osf5*) # as osf3* with the addition of -msym flag if test "$GCC" = yes; then allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*' archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' else allow_undefined_flag_GCJ=' -expect_unresolved \*' archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' archive_expsym_cmds_GCJ='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' # Both c and cxx compiler support -rpath directly hardcode_libdir_flag_spec_GCJ='-rpath $libdir' fi hardcode_libdir_separator_GCJ=: ;; solaris*) no_undefined_flag_GCJ=' -z text' if test "$GCC" = yes; then wlarc='${wl}' archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' else wlarc='' archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' fi hardcode_libdir_flag_spec_GCJ='-R$libdir' hardcode_shlibpath_var_GCJ=no case $host_os in solaris2.[0-5] | solaris2.[0-5].*) ;; *) # The compiler driver will combine and reorder linker options, # but understands `-z linker_flag'. GCC discards it without `$wl', # but is careful enough not to reorder. # Supported since Solaris 2.6 (maybe 2.5.1?) if test "$GCC" = yes; then whole_archive_flag_spec_GCJ='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' else whole_archive_flag_spec_GCJ='-z allextract$convenience -z defaultextract' fi ;; esac link_all_deplibs_GCJ=yes ;; sunos4*) if test "x$host_vendor" = xsequent; then # Use $CC to link under sequent, because it throws in some extra .o # files that make .init and .fini sections work. archive_cmds_GCJ='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds_GCJ='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' fi hardcode_libdir_flag_spec_GCJ='-L$libdir' hardcode_direct_GCJ=yes hardcode_minus_L_GCJ=yes hardcode_shlibpath_var_GCJ=no ;; sysv4) case $host_vendor in sni) archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct_GCJ=yes # is this really true??? ;; siemens) ## LD is ld it makes a PLAMLIB ## CC just makes a GrossModule. archive_cmds_GCJ='$LD -G -o $lib $libobjs $deplibs $linker_flags' reload_cmds_GCJ='$CC -r -o $output$reload_objs' hardcode_direct_GCJ=no ;; motorola) archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct_GCJ=no #Motorola manual says yes, but my tests say they lie ;; esac runpath_var='LD_RUN_PATH' hardcode_shlibpath_var_GCJ=no ;; sysv4.3*) archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_shlibpath_var_GCJ=no export_dynamic_flag_spec_GCJ='-Bexport' ;; sysv4*MP*) if test -d /usr/nec; then archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_shlibpath_var_GCJ=no runpath_var=LD_RUN_PATH hardcode_runpath_var=yes ld_shlibs_GCJ=yes fi ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) no_undefined_flag_GCJ='${wl}-z,text' archive_cmds_need_lc_GCJ=no hardcode_shlibpath_var_GCJ=no runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then archive_cmds_GCJ='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds_GCJ='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; sysv5* | sco3.2v5* | sco5v6*) # Note: We can NOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. no_undefined_flag_GCJ='${wl}-z,text' allow_undefined_flag_GCJ='${wl}-z,nodefs' archive_cmds_need_lc_GCJ=no hardcode_shlibpath_var_GCJ=no hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' hardcode_libdir_separator_GCJ=':' link_all_deplibs_GCJ=yes export_dynamic_flag_spec_GCJ='${wl}-Bexport' runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then archive_cmds_GCJ='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds_GCJ='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; uts4*) archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec_GCJ='-L$libdir' hardcode_shlibpath_var_GCJ=no ;; *) ld_shlibs_GCJ=no ;; esac fi { echo "$as_me:$LINENO: result: $ld_shlibs_GCJ" >&5 echo "${ECHO_T}$ld_shlibs_GCJ" >&6; } test "$ld_shlibs_GCJ" = no && can_build_shared=no # # Do we need to explicitly link libc? # case "x$archive_cmds_need_lc_GCJ" in x|xyes) # Assume -lc should be added archive_cmds_need_lc_GCJ=yes if test "$enable_shared" = yes && test "$GCC" = yes; then case $archive_cmds_GCJ in *'~'*) # FIXME: we may have to deal with multi-command sequences. ;; '$CC '*) # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; } $rm conftest* echo "$lt_simple_compile_test_code" > conftest.$ac_ext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } 2>conftest.err; then soname=conftest lib=conftest libobjs=conftest.$ac_objext deplibs= wl=$lt_prog_compiler_wl_GCJ pic_flag=$lt_prog_compiler_pic_GCJ compiler_flags=-v linker_flags=-v verstring= output_objdir=. libname=conftest lt_save_allow_undefined_flag=$allow_undefined_flag_GCJ allow_undefined_flag_GCJ= if { (eval echo "$as_me:$LINENO: \"$archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 (eval $archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } then archive_cmds_need_lc_GCJ=no else archive_cmds_need_lc_GCJ=yes fi allow_undefined_flag_GCJ=$lt_save_allow_undefined_flag else cat conftest.err 1>&5 fi $rm conftest* { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_GCJ" >&5 echo "${ECHO_T}$archive_cmds_need_lc_GCJ" >&6; } ;; esac fi ;; esac { echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; } library_names_spec= libname_spec='lib$name' soname_spec= shrext_cmds=".so" postinstall_cmds= postuninstall_cmds= finish_cmds= finish_eval= shlibpath_var= shlibpath_overrides_runpath=unknown version_type=none dynamic_linker="$host_os ld.so" sys_lib_dlsearch_path_spec="/lib /usr/lib" need_lib_prefix=unknown hardcode_into_libs=no # when you set need_version to no, make sure it does not cause -set_version # flags to be left without arguments need_version=unknown case $host_os in aix3*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' shlibpath_var=LIBPATH # AIX 3 has no versioning support, so we append a major version to the name. soname_spec='${libname}${release}${shared_ext}$major' ;; aix[4-9]*) version_type=linux need_lib_prefix=no need_version=no hardcode_into_libs=yes if test "$host_cpu" = ia64; then # AIX 5 supports IA64 library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH else # With GCC up to 2.95.x, collect2 would create an import file # for dependence libraries. The import file would start with # the line `#! .'. This would cause the generated library to # depend on `.', always an invalid library. This was fixed in # development snapshots of GCC prior to 3.0. case $host_os in aix4 | aix4.[01] | aix4.[01].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then : else can_build_shared=no fi ;; esac # AIX (on Power*) has no versioning support, so currently we can not hardcode correct # soname into executable. Probably we can add versioning support to # collect2, so additional links can be useful in future. if test "$aix_use_runtimelinking" = yes; then # If using run time linking (on AIX 4.2 or later) use lib.so # instead of lib.a to let people know that these are not # typical AIX shared libraries. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' else # We preserve .a as extension for shared libraries through AIX4.2 # and later when we are not doing run time linking. library_names_spec='${libname}${release}.a $libname.a' soname_spec='${libname}${release}${shared_ext}$major' fi shlibpath_var=LIBPATH fi ;; amigaos*) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; beos*) library_names_spec='${libname}${shared_ext}' dynamic_linker="$host_os ld.so" shlibpath_var=LIBRARY_PATH ;; bsdi[45]*) version_type=linux need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" # the default ld.so.conf also contains /usr/contrib/lib and # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow # libtool to hard-code these into programs ;; cygwin* | mingw* | pw32*) version_type=windows shrext_cmds=".dll" need_version=no need_lib_prefix=no case $GCC,$host_os in yes,cygwin* | yes,mingw* | yes,pw32*) library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname~ chmod a+x \$dldir/$dlname' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $rm \$dlpath' shlibpath_overrides_runpath=yes case $host_os in cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" ;; mingw*) # MinGW DLLs use traditional 'lib' prefix soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then # It is most probably a Windows format PATH printed by # mingw gcc, but we are running on Cygwin. Gcc prints its search # path with ; separators, and with drive letters. We can handle the # drive letters (cygwin fileutils understands them), so leave them, # especially as we might pass files found there to a mingw objdump, # which wouldn't understand a cygwinified path. Ahh. sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` else sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; esac ;; *) library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' ;; esac dynamic_linker='Win32 ld.exe' # FIXME: first we should search . and the directory the executable is in shlibpath_var=PATH ;; darwin* | rhapsody*) dynamic_linker="$host_os dyld" version_type=darwin need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' soname_spec='${libname}${release}${major}$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ;; dgux*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; freebsd1*) dynamic_linker=no ;; freebsd* | dragonfly*) # DragonFly does not have aout. When/if they implement a new # versioning mechanism, adjust this. if test -x /usr/bin/objformat; then objformat=`/usr/bin/objformat` else case $host_os in freebsd[123]*) objformat=aout ;; *) objformat=elf ;; esac fi version_type=freebsd-$objformat case $version_type in freebsd-elf*) library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' need_version=no need_lib_prefix=no ;; freebsd-*) library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' need_version=yes ;; esac shlibpath_var=LD_LIBRARY_PATH case $host_os in freebsd2*) shlibpath_overrides_runpath=yes ;; freebsd3.[01]* | freebsdelf3.[01]*) shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; *) # from 4.6 on, and DragonFly shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; esac ;; gnu*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH hardcode_into_libs=yes ;; hpux9* | hpux10* | hpux11*) # Give a soname corresponding to the major version so that dld.sl refuses to # link against other versions. version_type=sunos need_lib_prefix=no need_version=no case $host_cpu in ia64*) shrext_cmds='.so' hardcode_into_libs=yes dynamic_linker="$host_os dld.so" shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' if test "X$HPUX_IA64_MODE" = X32; then sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" else sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" fi sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; hppa*64*) shrext_cmds='.sl' hardcode_into_libs=yes dynamic_linker="$host_os dld.sl" shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; *) shrext_cmds='.sl' dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' ;; esac # HP-UX runs *really* slowly unless shared libraries are mode 555. postinstall_cmds='chmod 555 $lib' ;; interix[3-9]*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; irix5* | irix6* | nonstopux*) case $host_os in nonstopux*) version_type=nonstopux ;; *) if test "$lt_cv_prog_gnu_ld" = yes; then version_type=linux else version_type=irix fi ;; esac need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' case $host_os in irix5* | nonstopux*) libsuff= shlibsuff= ;; *) case $LD in # libtool.m4 will add one of these switches to LD *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= libmagic=32-bit;; *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 libmagic=64-bit;; *) libsuff= shlibsuff= libmagic=never-match;; esac ;; esac shlibpath_var=LD_LIBRARY${shlibsuff}_PATH shlibpath_overrides_runpath=no sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" hardcode_into_libs=yes ;; # No shared lib support for Linux oldld, aout, or coff. linux*oldld* | linux*aout* | linux*coff*) dynamic_linker=no ;; # This must be Linux ELF. linux* | k*bsd*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" fi # We used to test for /lib/ld.so.1 and disable shared libraries on # powerpc, because MkLinux only supported shared libraries with the # GNU dynamic linker. Since this was broken with cross compilers, # most powerpc-linux boxes support dynamic linking these days and # people can always --disable-shared, the test was removed, and we # assume the GNU/Linux dynamic linker is in use. dynamic_linker='GNU/Linux ld.so' ;; netbsdelf*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='NetBSD ld.elf_so' ;; netbsd*) version_type=sunos need_lib_prefix=no need_version=no if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='NetBSD ld.elf_so' fi shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; newsos6) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; nto-qnx*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; openbsd*) version_type=sunos sys_lib_dlsearch_path_spec="/usr/lib" need_lib_prefix=no # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. case $host_os in openbsd3.3 | openbsd3.3.*) need_version=yes ;; *) need_version=no ;; esac library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then case $host_os in openbsd2.[89] | openbsd2.[89].*) shlibpath_overrides_runpath=no ;; *) shlibpath_overrides_runpath=yes ;; esac else shlibpath_overrides_runpath=yes fi ;; os2*) libname_spec='$name' shrext_cmds=".dll" need_lib_prefix=no library_names_spec='$libname${shared_ext} $libname.a' dynamic_linker='OS/2 ld.exe' shlibpath_var=LIBPATH ;; osf3* | osf4* | osf5*) version_type=osf need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ;; rdos*) dynamic_linker=no ;; solaris*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes # ldd complains unless libraries are executable postinstall_cmds='chmod +x $lib' ;; sunos4*) version_type=sunos library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes if test "$with_gnu_ld" = yes; then need_lib_prefix=no fi need_version=yes ;; sysv4 | sysv4.3*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH case $host_vendor in sni) shlibpath_overrides_runpath=no need_lib_prefix=no export_dynamic_flag_spec='${wl}-Blargedynsym' runpath_var=LD_RUN_PATH ;; siemens) need_lib_prefix=no ;; motorola) need_lib_prefix=no need_version=no shlibpath_overrides_runpath=no sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ;; esac ;; sysv4*MP*) if test -d /usr/nec ;then version_type=linux library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' soname_spec='$libname${shared_ext}.$major' shlibpath_var=LD_LIBRARY_PATH fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) version_type=freebsd-elf need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH hardcode_into_libs=yes if test "$with_gnu_ld" = yes; then sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' shlibpath_overrides_runpath=no else sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' shlibpath_overrides_runpath=yes case $host_os in sco3.2v5*) sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ;; esac fi sys_lib_dlsearch_path_spec='/usr/lib' ;; uts4*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; *) dynamic_linker=no ;; esac { echo "$as_me:$LINENO: result: $dynamic_linker" >&5 echo "${ECHO_T}$dynamic_linker" >&6; } test "$dynamic_linker" = no && can_build_shared=no if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec" fi sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec" fi sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" variables_saved_for_relink="PATH $shlibpath_var $runpath_var" if test "$GCC" = yes; then variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi { echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; } hardcode_action_GCJ= if test -n "$hardcode_libdir_flag_spec_GCJ" || \ test -n "$runpath_var_GCJ" || \ test "X$hardcode_automatic_GCJ" = "Xyes" ; then # We can hardcode non-existant directories. if test "$hardcode_direct_GCJ" != no && # If the only mechanism to avoid hardcoding is shlibpath_var, we # have to relink, otherwise we might link with an installed library # when we should be linking with a yet-to-be-installed one ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, GCJ)" != no && test "$hardcode_minus_L_GCJ" != no; then # Linking always hardcodes the temporary library directory. hardcode_action_GCJ=relink else # We can link without hardcoding, and we can hardcode nonexisting dirs. hardcode_action_GCJ=immediate fi else # We cannot hardcode anything, or else we can only hardcode existing # directories. hardcode_action_GCJ=unsupported fi { echo "$as_me:$LINENO: result: $hardcode_action_GCJ" >&5 echo "${ECHO_T}$hardcode_action_GCJ" >&6; } if test "$hardcode_action_GCJ" = relink; then # Fast installation is not supported enable_fast_install=no elif test "$shlibpath_overrides_runpath" = yes || test "$enable_shared" = no; then # Fast installation is not necessary enable_fast_install=needless fi # The else clause should only fire when bootstrapping the # libtool distribution, otherwise you forgot to ship ltmain.sh # with your package, and you will get complaints that there are # no rules to generate ltmain.sh. if test -f "$ltmain"; then # See if we are running on zsh, and set the options which allow our commands through # without removal of \ escapes. if test -n "${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi # Now quote all the things that may contain metacharacters while being # careful not to overquote the AC_SUBSTed values. We take copies of the # variables and quote the copies for generation of the libtool script. for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ SED SHELL STRIP \ libname_spec library_names_spec soname_spec extract_expsyms_cmds \ old_striplib striplib file_magic_cmd finish_cmds finish_eval \ deplibs_check_method reload_flag reload_cmds need_locks \ lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ lt_cv_sys_global_symbol_to_c_name_address \ sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ old_postinstall_cmds old_postuninstall_cmds \ compiler_GCJ \ CC_GCJ \ LD_GCJ \ lt_prog_compiler_wl_GCJ \ lt_prog_compiler_pic_GCJ \ lt_prog_compiler_static_GCJ \ lt_prog_compiler_no_builtin_flag_GCJ \ export_dynamic_flag_spec_GCJ \ thread_safe_flag_spec_GCJ \ whole_archive_flag_spec_GCJ \ enable_shared_with_static_runtimes_GCJ \ old_archive_cmds_GCJ \ old_archive_from_new_cmds_GCJ \ predep_objects_GCJ \ postdep_objects_GCJ \ predeps_GCJ \ postdeps_GCJ \ compiler_lib_search_path_GCJ \ compiler_lib_search_dirs_GCJ \ archive_cmds_GCJ \ archive_expsym_cmds_GCJ \ postinstall_cmds_GCJ \ postuninstall_cmds_GCJ \ old_archive_from_expsyms_cmds_GCJ \ allow_undefined_flag_GCJ \ no_undefined_flag_GCJ \ export_symbols_cmds_GCJ \ hardcode_libdir_flag_spec_GCJ \ hardcode_libdir_flag_spec_ld_GCJ \ hardcode_libdir_separator_GCJ \ hardcode_automatic_GCJ \ module_cmds_GCJ \ module_expsym_cmds_GCJ \ lt_cv_prog_compiler_c_o_GCJ \ fix_srcfile_path_GCJ \ exclude_expsyms_GCJ \ include_expsyms_GCJ; do case $var in old_archive_cmds_GCJ | \ old_archive_from_new_cmds_GCJ | \ archive_cmds_GCJ | \ archive_expsym_cmds_GCJ | \ module_cmds_GCJ | \ module_expsym_cmds_GCJ | \ old_archive_from_expsyms_cmds_GCJ | \ export_symbols_cmds_GCJ | \ extract_expsyms_cmds | reload_cmds | finish_cmds | \ postinstall_cmds | postuninstall_cmds | \ old_postinstall_cmds | old_postuninstall_cmds | \ sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) # Double-quote double-evaled strings. eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" ;; *) eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" ;; esac done case $lt_echo in *'\$0 --fallback-echo"') lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` ;; esac cfgfile="$ofile" cat <<__EOF__ >> "$cfgfile" # ### BEGIN LIBTOOL TAG CONFIG: $tagname # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: # Shell to use when invoking shell scripts. SHELL=$lt_SHELL # Whether or not to build shared libraries. build_libtool_libs=$enable_shared # Whether or not to build static libraries. build_old_libs=$enable_static # Whether or not to add -lc for building shared libraries. build_libtool_need_lc=$archive_cmds_need_lc_GCJ # Whether or not to disallow shared libs when runtime libs are static allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_GCJ # Whether or not to optimize for fast installation. fast_install=$enable_fast_install # The host system. host_alias=$host_alias host=$host host_os=$host_os # The build system. build_alias=$build_alias build=$build build_os=$build_os # An echo program that does not interpret backslashes. echo=$lt_echo # The archiver. AR=$lt_AR AR_FLAGS=$lt_AR_FLAGS # A C compiler. LTCC=$lt_LTCC # LTCC compiler flags. LTCFLAGS=$lt_LTCFLAGS # A language-specific compiler. CC=$lt_compiler_GCJ # Is the compiler the GNU C compiler? with_gcc=$GCC_GCJ # An ERE matcher. EGREP=$lt_EGREP # The linker used to build libraries. LD=$lt_LD_GCJ # Whether we need hard or soft links. LN_S=$lt_LN_S # A BSD-compatible nm program. NM=$lt_NM # A symbol stripping program STRIP=$lt_STRIP # Used to examine libraries when file_magic_cmd begins "file" MAGIC_CMD=$MAGIC_CMD # Used on cygwin: DLL creation program. DLLTOOL="$DLLTOOL" # Used on cygwin: object dumper. OBJDUMP="$OBJDUMP" # Used on cygwin: assembler. AS="$AS" # The name of the directory that contains temporary libtool files. objdir=$objdir # How to create reloadable object files. reload_flag=$lt_reload_flag reload_cmds=$lt_reload_cmds # How to pass a linker flag through the compiler. wl=$lt_lt_prog_compiler_wl_GCJ # Object file suffix (normally "o"). objext="$ac_objext" # Old archive suffix (normally "a"). libext="$libext" # Shared library suffix (normally ".so"). shrext_cmds='$shrext_cmds' # Executable file suffix (normally ""). exeext="$exeext" # Additional compiler flags for building library objects. pic_flag=$lt_lt_prog_compiler_pic_GCJ pic_mode=$pic_mode # What is the maximum length of a command? max_cmd_len=$lt_cv_sys_max_cmd_len # Does compiler simultaneously support -c and -o options? compiler_c_o=$lt_lt_cv_prog_compiler_c_o_GCJ # Must we lock files when doing compilation? need_locks=$lt_need_locks # Do we need the lib prefix for modules? need_lib_prefix=$need_lib_prefix # Do we need a version for libraries? need_version=$need_version # Whether dlopen is supported. dlopen_support=$enable_dlopen # Whether dlopen of programs is supported. dlopen_self=$enable_dlopen_self # Whether dlopen of statically linked programs is supported. dlopen_self_static=$enable_dlopen_self_static # Compiler flag to prevent dynamic linking. link_static_flag=$lt_lt_prog_compiler_static_GCJ # Compiler flag to turn off builtin functions. no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_GCJ # Compiler flag to allow reflexive dlopens. export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_GCJ # Compiler flag to generate shared objects directly from archives. whole_archive_flag_spec=$lt_whole_archive_flag_spec_GCJ # Compiler flag to generate thread-safe objects. thread_safe_flag_spec=$lt_thread_safe_flag_spec_GCJ # Library versioning type. version_type=$version_type # Format of library name prefix. libname_spec=$lt_libname_spec # List of archive names. First name is the real one, the rest are links. # The last name is the one that the linker finds with -lNAME. library_names_spec=$lt_library_names_spec # The coded name of the library, if different from the real name. soname_spec=$lt_soname_spec # Commands used to build and install an old-style archive. RANLIB=$lt_RANLIB old_archive_cmds=$lt_old_archive_cmds_GCJ old_postinstall_cmds=$lt_old_postinstall_cmds old_postuninstall_cmds=$lt_old_postuninstall_cmds # Create an old-style archive from a shared archive. old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_GCJ # Create a temporary old-style archive to link instead of a shared archive. old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_GCJ # Commands used to build and install a shared archive. archive_cmds=$lt_archive_cmds_GCJ archive_expsym_cmds=$lt_archive_expsym_cmds_GCJ postinstall_cmds=$lt_postinstall_cmds postuninstall_cmds=$lt_postuninstall_cmds # Commands used to build a loadable module (assumed same as above if empty) module_cmds=$lt_module_cmds_GCJ module_expsym_cmds=$lt_module_expsym_cmds_GCJ # Commands to strip libraries. old_striplib=$lt_old_striplib striplib=$lt_striplib # Dependencies to place before the objects being linked to create a # shared library. predep_objects=$lt_predep_objects_GCJ # Dependencies to place after the objects being linked to create a # shared library. postdep_objects=$lt_postdep_objects_GCJ # Dependencies to place before the objects being linked to create a # shared library. predeps=$lt_predeps_GCJ # Dependencies to place after the objects being linked to create a # shared library. postdeps=$lt_postdeps_GCJ # The directories searched by this compiler when creating a shared # library compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_GCJ # The library search path used internally by the compiler when linking # a shared library. compiler_lib_search_path=$lt_compiler_lib_search_path_GCJ # Method to check whether dependent libraries are shared objects. deplibs_check_method=$lt_deplibs_check_method # Command to use when deplibs_check_method == file_magic. file_magic_cmd=$lt_file_magic_cmd # Flag that allows shared libraries with undefined symbols to be built. allow_undefined_flag=$lt_allow_undefined_flag_GCJ # Flag that forces no undefined symbols. no_undefined_flag=$lt_no_undefined_flag_GCJ # Commands used to finish a libtool library installation in a directory. finish_cmds=$lt_finish_cmds # Same as above, but a single script fragment to be evaled but not shown. finish_eval=$lt_finish_eval # Take the output of nm and produce a listing of raw symbols and C names. global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe # Transform the output of nm in a proper C declaration global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl # Transform the output of nm in a C name address pair global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. runpath_var=$runpath_var # This is the shared library path variable. shlibpath_var=$shlibpath_var # Is shlibpath searched before the hard-coded library search path? shlibpath_overrides_runpath=$shlibpath_overrides_runpath # How to hardcode a shared library path into an executable. hardcode_action=$hardcode_action_GCJ # Whether we should hardcode library paths into libraries. hardcode_into_libs=$hardcode_into_libs # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_GCJ # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_GCJ # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator_GCJ # Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the # resulting binary. hardcode_direct=$hardcode_direct_GCJ # Set to yes if using the -LDIR flag during linking hardcodes DIR into the # resulting binary. hardcode_minus_L=$hardcode_minus_L_GCJ # Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into # the resulting binary. hardcode_shlibpath_var=$hardcode_shlibpath_var_GCJ # Set to yes if building a shared library automatically hardcodes DIR into the library # and all subsequent libraries and executables linked against it. hardcode_automatic=$hardcode_automatic_GCJ # Variables whose values should be saved in libtool wrapper scripts and # restored at relink time. variables_saved_for_relink="$variables_saved_for_relink" # Whether libtool must link a program against all its dependency libraries. link_all_deplibs=$link_all_deplibs_GCJ # Compile-time system search path for libraries sys_lib_search_path_spec=$lt_sys_lib_search_path_spec # Run-time system search path for libraries sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec # Fix the shell variable \$srcfile for the compiler. fix_srcfile_path=$lt_fix_srcfile_path # Set to yes if exported symbols are required. always_export_symbols=$always_export_symbols_GCJ # The commands to list exported symbols. export_symbols_cmds=$lt_export_symbols_cmds_GCJ # The commands to extract the exported symbol list from a shared archive. extract_expsyms_cmds=$lt_extract_expsyms_cmds # Symbols that should not be listed in the preloaded symbols. exclude_expsyms=$lt_exclude_expsyms_GCJ # Symbols that must always be exported. include_expsyms=$lt_include_expsyms_GCJ # ### END LIBTOOL TAG CONFIG: $tagname __EOF__ else # If there is no Makefile yet, we rely on a make rule to execute # `config.status --recheck' to rerun these tests and create the # libtool script then. ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` if test -f "$ltmain_in"; then test -f Makefile && make "$ltmain" fi fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu CC="$lt_save_CC" else tagname="" fi ;; RC) # Source file extension for RC test sources. ac_ext=rc # Object file extension for compiled RC test sources. objext=o objext_RC=$objext # Code to be used in simple compile tests lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' # Code to be used in simple link tests lt_simple_link_test_code="$lt_simple_compile_test_code" # ltmain only uses $CC for tagged configurations so make sure $CC is set. # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} # If no C compiler flags were specified, use CFLAGS. LTCFLAGS=${LTCFLAGS-"$CFLAGS"} # Allow CC to be a program name with arguments. compiler=$CC # save warnings/boilerplate of simple test code ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" >conftest.$ac_ext eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_compiler_boilerplate=`cat conftest.err` $rm conftest* ac_outfile=conftest.$ac_objext echo "$lt_simple_link_test_code" >conftest.$ac_ext eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_linker_boilerplate=`cat conftest.err` $rm -r conftest* # Allow CC to be a program name with arguments. lt_save_CC="$CC" CC=${RC-"windres"} compiler=$CC compiler_RC=$CC for cc_temp in $compiler""; do case $cc_temp in compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; \-*) ;; *) break;; esac done cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` lt_cv_prog_compiler_c_o_RC=yes # The else clause should only fire when bootstrapping the # libtool distribution, otherwise you forgot to ship ltmain.sh # with your package, and you will get complaints that there are # no rules to generate ltmain.sh. if test -f "$ltmain"; then # See if we are running on zsh, and set the options which allow our commands through # without removal of \ escapes. if test -n "${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi # Now quote all the things that may contain metacharacters while being # careful not to overquote the AC_SUBSTed values. We take copies of the # variables and quote the copies for generation of the libtool script. for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ SED SHELL STRIP \ libname_spec library_names_spec soname_spec extract_expsyms_cmds \ old_striplib striplib file_magic_cmd finish_cmds finish_eval \ deplibs_check_method reload_flag reload_cmds need_locks \ lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ lt_cv_sys_global_symbol_to_c_name_address \ sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ old_postinstall_cmds old_postuninstall_cmds \ compiler_RC \ CC_RC \ LD_RC \ lt_prog_compiler_wl_RC \ lt_prog_compiler_pic_RC \ lt_prog_compiler_static_RC \ lt_prog_compiler_no_builtin_flag_RC \ export_dynamic_flag_spec_RC \ thread_safe_flag_spec_RC \ whole_archive_flag_spec_RC \ enable_shared_with_static_runtimes_RC \ old_archive_cmds_RC \ old_archive_from_new_cmds_RC \ predep_objects_RC \ postdep_objects_RC \ predeps_RC \ postdeps_RC \ compiler_lib_search_path_RC \ compiler_lib_search_dirs_RC \ archive_cmds_RC \ archive_expsym_cmds_RC \ postinstall_cmds_RC \ postuninstall_cmds_RC \ old_archive_from_expsyms_cmds_RC \ allow_undefined_flag_RC \ no_undefined_flag_RC \ export_symbols_cmds_RC \ hardcode_libdir_flag_spec_RC \ hardcode_libdir_flag_spec_ld_RC \ hardcode_libdir_separator_RC \ hardcode_automatic_RC \ module_cmds_RC \ module_expsym_cmds_RC \ lt_cv_prog_compiler_c_o_RC \ fix_srcfile_path_RC \ exclude_expsyms_RC \ include_expsyms_RC; do case $var in old_archive_cmds_RC | \ old_archive_from_new_cmds_RC | \ archive_cmds_RC | \ archive_expsym_cmds_RC | \ module_cmds_RC | \ module_expsym_cmds_RC | \ old_archive_from_expsyms_cmds_RC | \ export_symbols_cmds_RC | \ extract_expsyms_cmds | reload_cmds | finish_cmds | \ postinstall_cmds | postuninstall_cmds | \ old_postinstall_cmds | old_postuninstall_cmds | \ sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) # Double-quote double-evaled strings. eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" ;; *) eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" ;; esac done case $lt_echo in *'\$0 --fallback-echo"') lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` ;; esac cfgfile="$ofile" cat <<__EOF__ >> "$cfgfile" # ### BEGIN LIBTOOL TAG CONFIG: $tagname # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: # Shell to use when invoking shell scripts. SHELL=$lt_SHELL # Whether or not to build shared libraries. build_libtool_libs=$enable_shared # Whether or not to build static libraries. build_old_libs=$enable_static # Whether or not to add -lc for building shared libraries. build_libtool_need_lc=$archive_cmds_need_lc_RC # Whether or not to disallow shared libs when runtime libs are static allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_RC # Whether or not to optimize for fast installation. fast_install=$enable_fast_install # The host system. host_alias=$host_alias host=$host host_os=$host_os # The build system. build_alias=$build_alias build=$build build_os=$build_os # An echo program that does not interpret backslashes. echo=$lt_echo # The archiver. AR=$lt_AR AR_FLAGS=$lt_AR_FLAGS # A C compiler. LTCC=$lt_LTCC # LTCC compiler flags. LTCFLAGS=$lt_LTCFLAGS # A language-specific compiler. CC=$lt_compiler_RC # Is the compiler the GNU C compiler? with_gcc=$GCC_RC # An ERE matcher. EGREP=$lt_EGREP # The linker used to build libraries. LD=$lt_LD_RC # Whether we need hard or soft links. LN_S=$lt_LN_S # A BSD-compatible nm program. NM=$lt_NM # A symbol stripping program STRIP=$lt_STRIP # Used to examine libraries when file_magic_cmd begins "file" MAGIC_CMD=$MAGIC_CMD # Used on cygwin: DLL creation program. DLLTOOL="$DLLTOOL" # Used on cygwin: object dumper. OBJDUMP="$OBJDUMP" # Used on cygwin: assembler. AS="$AS" # The name of the directory that contains temporary libtool files. objdir=$objdir # How to create reloadable object files. reload_flag=$lt_reload_flag reload_cmds=$lt_reload_cmds # How to pass a linker flag through the compiler. wl=$lt_lt_prog_compiler_wl_RC # Object file suffix (normally "o"). objext="$ac_objext" # Old archive suffix (normally "a"). libext="$libext" # Shared library suffix (normally ".so"). shrext_cmds='$shrext_cmds' # Executable file suffix (normally ""). exeext="$exeext" # Additional compiler flags for building library objects. pic_flag=$lt_lt_prog_compiler_pic_RC pic_mode=$pic_mode # What is the maximum length of a command? max_cmd_len=$lt_cv_sys_max_cmd_len # Does compiler simultaneously support -c and -o options? compiler_c_o=$lt_lt_cv_prog_compiler_c_o_RC # Must we lock files when doing compilation? need_locks=$lt_need_locks # Do we need the lib prefix for modules? need_lib_prefix=$need_lib_prefix # Do we need a version for libraries? need_version=$need_version # Whether dlopen is supported. dlopen_support=$enable_dlopen # Whether dlopen of programs is supported. dlopen_self=$enable_dlopen_self # Whether dlopen of statically linked programs is supported. dlopen_self_static=$enable_dlopen_self_static # Compiler flag to prevent dynamic linking. link_static_flag=$lt_lt_prog_compiler_static_RC # Compiler flag to turn off builtin functions. no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_RC # Compiler flag to allow reflexive dlopens. export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_RC # Compiler flag to generate shared objects directly from archives. whole_archive_flag_spec=$lt_whole_archive_flag_spec_RC # Compiler flag to generate thread-safe objects. thread_safe_flag_spec=$lt_thread_safe_flag_spec_RC # Library versioning type. version_type=$version_type # Format of library name prefix. libname_spec=$lt_libname_spec # List of archive names. First name is the real one, the rest are links. # The last name is the one that the linker finds with -lNAME. library_names_spec=$lt_library_names_spec # The coded name of the library, if different from the real name. soname_spec=$lt_soname_spec # Commands used to build and install an old-style archive. RANLIB=$lt_RANLIB old_archive_cmds=$lt_old_archive_cmds_RC old_postinstall_cmds=$lt_old_postinstall_cmds old_postuninstall_cmds=$lt_old_postuninstall_cmds # Create an old-style archive from a shared archive. old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_RC # Create a temporary old-style archive to link instead of a shared archive. old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_RC # Commands used to build and install a shared archive. archive_cmds=$lt_archive_cmds_RC archive_expsym_cmds=$lt_archive_expsym_cmds_RC postinstall_cmds=$lt_postinstall_cmds postuninstall_cmds=$lt_postuninstall_cmds # Commands used to build a loadable module (assumed same as above if empty) module_cmds=$lt_module_cmds_RC module_expsym_cmds=$lt_module_expsym_cmds_RC # Commands to strip libraries. old_striplib=$lt_old_striplib striplib=$lt_striplib # Dependencies to place before the objects being linked to create a # shared library. predep_objects=$lt_predep_objects_RC # Dependencies to place after the objects being linked to create a # shared library. postdep_objects=$lt_postdep_objects_RC # Dependencies to place before the objects being linked to create a # shared library. predeps=$lt_predeps_RC # Dependencies to place after the objects being linked to create a # shared library. postdeps=$lt_postdeps_RC # The directories searched by this compiler when creating a shared # library compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_RC # The library search path used internally by the compiler when linking # a shared library. compiler_lib_search_path=$lt_compiler_lib_search_path_RC # Method to check whether dependent libraries are shared objects. deplibs_check_method=$lt_deplibs_check_method # Command to use when deplibs_check_method == file_magic. file_magic_cmd=$lt_file_magic_cmd # Flag that allows shared libraries with undefined symbols to be built. allow_undefined_flag=$lt_allow_undefined_flag_RC # Flag that forces no undefined symbols. no_undefined_flag=$lt_no_undefined_flag_RC # Commands used to finish a libtool library installation in a directory. finish_cmds=$lt_finish_cmds # Same as above, but a single script fragment to be evaled but not shown. finish_eval=$lt_finish_eval # Take the output of nm and produce a listing of raw symbols and C names. global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe # Transform the output of nm in a proper C declaration global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl # Transform the output of nm in a C name address pair global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. runpath_var=$runpath_var # This is the shared library path variable. shlibpath_var=$shlibpath_var # Is shlibpath searched before the hard-coded library search path? shlibpath_overrides_runpath=$shlibpath_overrides_runpath # How to hardcode a shared library path into an executable. hardcode_action=$hardcode_action_RC # Whether we should hardcode library paths into libraries. hardcode_into_libs=$hardcode_into_libs # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_RC # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_RC # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator_RC # Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the # resulting binary. hardcode_direct=$hardcode_direct_RC # Set to yes if using the -LDIR flag during linking hardcodes DIR into the # resulting binary. hardcode_minus_L=$hardcode_minus_L_RC # Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into # the resulting binary. hardcode_shlibpath_var=$hardcode_shlibpath_var_RC # Set to yes if building a shared library automatically hardcodes DIR into the library # and all subsequent libraries and executables linked against it. hardcode_automatic=$hardcode_automatic_RC # Variables whose values should be saved in libtool wrapper scripts and # restored at relink time. variables_saved_for_relink="$variables_saved_for_relink" # Whether libtool must link a program against all its dependency libraries. link_all_deplibs=$link_all_deplibs_RC # Compile-time system search path for libraries sys_lib_search_path_spec=$lt_sys_lib_search_path_spec # Run-time system search path for libraries sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec # Fix the shell variable \$srcfile for the compiler. fix_srcfile_path=$lt_fix_srcfile_path # Set to yes if exported symbols are required. always_export_symbols=$always_export_symbols_RC # The commands to list exported symbols. export_symbols_cmds=$lt_export_symbols_cmds_RC # The commands to extract the exported symbol list from a shared archive. extract_expsyms_cmds=$lt_extract_expsyms_cmds # Symbols that should not be listed in the preloaded symbols. exclude_expsyms=$lt_exclude_expsyms_RC # Symbols that must always be exported. include_expsyms=$lt_include_expsyms_RC # ### END LIBTOOL TAG CONFIG: $tagname __EOF__ else # If there is no Makefile yet, we rely on a make rule to execute # `config.status --recheck' to rerun these tests and create the # libtool script then. ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` if test -f "$ltmain_in"; then test -f Makefile && make "$ltmain" fi fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu CC="$lt_save_CC" ;; *) { { echo "$as_me:$LINENO: error: Unsupported tag name: $tagname" >&5 echo "$as_me: error: Unsupported tag name: $tagname" >&2;} { (exit 1); exit 1; }; } ;; esac # Append the new tag name to the list of available tags. if test -n "$tagname" ; then available_tags="$available_tags $tagname" fi fi done IFS="$lt_save_ifs" # Now substitute the updated list of available tags. if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then mv "${ofile}T" "$ofile" chmod +x "$ofile" else rm -f "${ofile}T" { { echo "$as_me:$LINENO: error: unable to update list of available tagged configurations." >&5 echo "$as_me: error: unable to update list of available tagged configurations." >&2;} { (exit 1); exit 1; }; } fi fi # This can be used to rebuild libtool when needed LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' # Prevent multiple expansion # Checks for header files. { echo "$as_me:$LINENO: checking for ANSI C header files" >&5 echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; } if test "${ac_cv_header_stdc+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include #include #include int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_header_stdc=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_header_stdc=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "memchr" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "free" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. if test "$cross_compiling" = yes; then : else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include #if ((' ' & 0x0FF) == 0x020) # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) #else # define ISLOWER(c) \ (('a' <= (c) && (c) <= 'i') \ || ('j' <= (c) && (c) <= 'r') \ || ('s' <= (c) && (c) <= 'z')) # define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) #endif #define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) int main () { int i; for (i = 0; i < 256; i++) if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) return 2; return 0; } _ACEOF rm -f conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_link") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' { (case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then : else echo "$as_me: program exited with status $ac_status" >&5 echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ( exit $ac_status ) ac_cv_header_stdc=no fi rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi fi fi { echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 echo "${ECHO_T}$ac_cv_header_stdc" >&6; } if test $ac_cv_header_stdc = yes; then cat >>confdefs.h <<\_ACEOF #define STDC_HEADERS 1 _ACEOF fi ac_header_dirent=no for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h; do as_ac_Header=`echo "ac_cv_header_dirent_$ac_hdr" | $as_tr_sh` { echo "$as_me:$LINENO: checking for $ac_hdr that defines DIR" >&5 echo $ECHO_N "checking for $ac_hdr that defines DIR... $ECHO_C" >&6; } if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include <$ac_hdr> int main () { if ((DIR *) 0) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then eval "$as_ac_Header=yes" else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 eval "$as_ac_Header=no" fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi ac_res=`eval echo '${'$as_ac_Header'}'` { echo "$as_me:$LINENO: result: $ac_res" >&5 echo "${ECHO_T}$ac_res" >&6; } if test `eval echo '${'$as_ac_Header'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_hdr" | $as_tr_cpp` 1 _ACEOF ac_header_dirent=$ac_hdr; break fi done # Two versions of opendir et al. are in -ldir and -lx on SCO Xenix. if test $ac_header_dirent = dirent.h; then { echo "$as_me:$LINENO: checking for library containing opendir" >&5 echo $ECHO_N "checking for library containing opendir... $ECHO_C" >&6; } if test "${ac_cv_search_opendir+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_func_search_save_LIBS=$LIBS cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char opendir (); int main () { return opendir (); ; return 0; } _ACEOF for ac_lib in '' dir; do if test -z "$ac_lib"; then ac_res="none required" else ac_res=-l$ac_lib LIBS="-l$ac_lib $ac_func_search_save_LIBS" fi rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && $as_test_x conftest$ac_exeext; then ac_cv_search_opendir=$ac_res else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext if test "${ac_cv_search_opendir+set}" = set; then break fi done if test "${ac_cv_search_opendir+set}" = set; then : else ac_cv_search_opendir=no fi rm conftest.$ac_ext LIBS=$ac_func_search_save_LIBS fi { echo "$as_me:$LINENO: result: $ac_cv_search_opendir" >&5 echo "${ECHO_T}$ac_cv_search_opendir" >&6; } ac_res=$ac_cv_search_opendir if test "$ac_res" != no; then test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" fi else { echo "$as_me:$LINENO: checking for library containing opendir" >&5 echo $ECHO_N "checking for library containing opendir... $ECHO_C" >&6; } if test "${ac_cv_search_opendir+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_func_search_save_LIBS=$LIBS cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char opendir (); int main () { return opendir (); ; return 0; } _ACEOF for ac_lib in '' x; do if test -z "$ac_lib"; then ac_res="none required" else ac_res=-l$ac_lib LIBS="-l$ac_lib $ac_func_search_save_LIBS" fi rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && $as_test_x conftest$ac_exeext; then ac_cv_search_opendir=$ac_res else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext if test "${ac_cv_search_opendir+set}" = set; then break fi done if test "${ac_cv_search_opendir+set}" = set; then : else ac_cv_search_opendir=no fi rm conftest.$ac_ext LIBS=$ac_func_search_save_LIBS fi { echo "$as_me:$LINENO: result: $ac_cv_search_opendir" >&5 echo "${ECHO_T}$ac_cv_search_opendir" >&6; } ac_res=$ac_cv_search_opendir if test "$ac_res" != no; then test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" fi fi for ac_header in arpa/inet.h errno.h fcntl.h netdb.h netinet/in.h stdlib.h string.h sys/ioctl.h sys/socket.h sys/time.h termios.h unistd.h sys/select.h sys/times.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then { echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 fi ac_res=`eval echo '${'$as_ac_Header'}'` { echo "$as_me:$LINENO: result: $ac_res" >&5 echo "${ECHO_T}$ac_res" >&6; } else # Is the header compilable? { echo "$as_me:$LINENO: checking $ac_header usability" >&5 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext { echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 echo "${ECHO_T}$ac_header_compiler" >&6; } # Is the header present? { echo "$as_me:$LINENO: checking $ac_header presence" >&5 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <$ac_header> _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext { echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 echo "${ECHO_T}$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in yes:no: ) { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} ac_header_preproc=yes ;; no:yes:* ) { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} ( cat <<\_ASBOX ## ---------------------------- ## ## Report this to zany@triq.net ## ## ---------------------------- ## _ASBOX ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac { echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 else eval "$as_ac_Header=\$ac_header_preproc" fi ac_res=`eval echo '${'$as_ac_Header'}'` { echo "$as_me:$LINENO: result: $ac_res" >&5 echo "${ECHO_T}$ac_res" >&6; } fi if test `eval echo '${'$as_ac_Header'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done case $host in *-*-mingw32*) EXTRA_LIBS="$EXTRA_LIBS -lws2_32" ;; esac # Checks for libraries. if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args. set dummy ${ac_tool_prefix}pkg-config; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_path_PKG_CONFIG+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else case $PKG_CONFIG in [\\/]* | ?:[\\/]*) ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi PKG_CONFIG=$ac_cv_path_PKG_CONFIG if test -n "$PKG_CONFIG"; then { echo "$as_me:$LINENO: result: $PKG_CONFIG" >&5 echo "${ECHO_T}$PKG_CONFIG" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi fi if test -z "$ac_cv_path_PKG_CONFIG"; then ac_pt_PKG_CONFIG=$PKG_CONFIG # Extract the first word of "pkg-config", so it can be a program name with args. set dummy pkg-config; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_path_ac_pt_PKG_CONFIG+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else case $ac_pt_PKG_CONFIG in [\\/]* | ?:[\\/]*) ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG if test -n "$ac_pt_PKG_CONFIG"; then { echo "$as_me:$LINENO: result: $ac_pt_PKG_CONFIG" >&5 echo "${ECHO_T}$ac_pt_PKG_CONFIG" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi if test "x$ac_pt_PKG_CONFIG" = x; then PKG_CONFIG="" else case $cross_compiling:$ac_tool_warned in yes:) { echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&5 echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&2;} ac_tool_warned=yes ;; esac PKG_CONFIG=$ac_pt_PKG_CONFIG fi else PKG_CONFIG="$ac_cv_path_PKG_CONFIG" fi fi if test -n "$PKG_CONFIG"; then _pkg_min_version=0.9.0 { echo "$as_me:$LINENO: checking pkg-config is at least version $_pkg_min_version" >&5 echo $ECHO_N "checking pkg-config is at least version $_pkg_min_version... $ECHO_C" >&6; } if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then { echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } PKG_CONFIG="" fi fi pkg_failed=no { echo "$as_me:$LINENO: checking for OPENOBEX" >&5 echo $ECHO_N "checking for OPENOBEX... $ECHO_C" >&6; } if test -n "$PKG_CONFIG"; then if test -n "$OPENOBEX_CFLAGS"; then pkg_cv_OPENOBEX_CFLAGS="$OPENOBEX_CFLAGS" else if test -n "$PKG_CONFIG" && \ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"openobex\"") >&5 ($PKG_CONFIG --exists --print-errors "openobex") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then pkg_cv_OPENOBEX_CFLAGS=`$PKG_CONFIG --cflags "openobex" 2>/dev/null` else pkg_failed=yes fi fi else pkg_failed=untried fi if test -n "$PKG_CONFIG"; then if test -n "$OPENOBEX_LIBS"; then pkg_cv_OPENOBEX_LIBS="$OPENOBEX_LIBS" else if test -n "$PKG_CONFIG" && \ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"openobex\"") >&5 ($PKG_CONFIG --exists --print-errors "openobex") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then pkg_cv_OPENOBEX_LIBS=`$PKG_CONFIG --libs "openobex" 2>/dev/null` else pkg_failed=yes fi fi else pkg_failed=untried fi if test $pkg_failed = yes; then if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then _pkg_short_errors_supported=yes else _pkg_short_errors_supported=no fi if test $_pkg_short_errors_supported = yes; then OPENOBEX_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "openobex"` else OPENOBEX_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "openobex"` fi # Put the nasty error message in config.log where it belongs echo "$OPENOBEX_PKG_ERRORS" >&5 { { echo "$as_me:$LINENO: error: Package requirements (openobex) were not met: $OPENOBEX_PKG_ERRORS Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables OPENOBEX_CFLAGS and OPENOBEX_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. " >&5 echo "$as_me: error: Package requirements (openobex) were not met: $OPENOBEX_PKG_ERRORS Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables OPENOBEX_CFLAGS and OPENOBEX_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. " >&2;} { (exit 1); exit 1; }; } elif test $pkg_failed = untried; then { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. Alternatively, you may set the environment variables OPENOBEX_CFLAGS and OPENOBEX_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. To get pkg-config, see . See \`config.log' for more details." >&5 echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. Alternatively, you may set the environment variables OPENOBEX_CFLAGS and OPENOBEX_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. To get pkg-config, see . See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } else OPENOBEX_CFLAGS=$pkg_cv_OPENOBEX_CFLAGS OPENOBEX_LIBS=$pkg_cv_OPENOBEX_LIBS { echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6; } : fi REQUIRES="openobex" if test "X$prefix" = "XNONE"; then acl_final_prefix="$ac_default_prefix" else acl_final_prefix="$prefix" fi if test "X$exec_prefix" = "XNONE"; then acl_final_exec_prefix='${prefix}' else acl_final_exec_prefix="$exec_prefix" fi acl_save_prefix="$prefix" prefix="$acl_final_prefix" eval acl_final_exec_prefix=\"$acl_final_exec_prefix\" prefix="$acl_save_prefix" # Check whether --with-gnu-ld was given. if test "${with_gnu_ld+set}" = set; then withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes else with_gnu_ld=no fi # Prepare PATH_SEPARATOR. # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then echo "#! /bin/sh" >conf$$.sh echo "exit 0" >>conf$$.sh chmod +x conf$$.sh if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi rm -f conf$$.sh fi ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. { echo "$as_me:$LINENO: checking for ld used by GCC" >&5 echo $ECHO_N "checking for ld used by GCC... $ECHO_C" >&6; } case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [\\/]* | [A-Za-z]:[\\/]*) re_direlt='/[^/][^/]*/\.\./' # Canonicalize the path of ld ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then { echo "$as_me:$LINENO: checking for GNU ld" >&5 echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; } else { echo "$as_me:$LINENO: checking for non-GNU ld" >&5 echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; } fi if test "${acl_cv_path_LD+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -z "$LD"; then IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then acl_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some GNU ld's only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$acl_cv_path_LD" -v 2>&1 < /dev/null` in *GNU* | *'with BFD'*) test "$with_gnu_ld" != no && break ;; *) test "$with_gnu_ld" != yes && break ;; esac fi done IFS="$ac_save_ifs" else acl_cv_path_LD="$LD" # Let the user override the test with a path. fi fi LD="$acl_cv_path_LD" if test -n "$LD"; then { echo "$as_me:$LINENO: result: $LD" >&5 echo "${ECHO_T}$LD" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} { (exit 1); exit 1; }; } { echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; } if test "${acl_cv_prog_gnu_ld+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else # I'd rather use --version here, but apparently some GNU ld's only accept -v. case `$LD -v 2>&1 &5 echo "${ECHO_T}$acl_cv_prog_gnu_ld" >&6; } with_gnu_ld=$acl_cv_prog_gnu_ld { echo "$as_me:$LINENO: checking for shared library run path origin" >&5 echo $ECHO_N "checking for shared library run path origin... $ECHO_C" >&6; } if test "${acl_cv_rpath+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \ ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh . ./conftest.sh rm -f ./conftest.sh acl_cv_rpath=done fi { echo "$as_me:$LINENO: result: $acl_cv_rpath" >&5 echo "${ECHO_T}$acl_cv_rpath" >&6; } wl="$acl_cv_wl" libext="$acl_cv_libext" shlibext="$acl_cv_shlibext" hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec" hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator" hardcode_direct="$acl_cv_hardcode_direct" hardcode_minus_L="$acl_cv_hardcode_minus_L" # Check whether --enable-rpath was given. if test "${enable_rpath+set}" = set; then enableval=$enable_rpath; : else enable_rpath=yes fi acl_libdirstem=lib searchpath=`(LC_ALL=C $CC -print-search-dirs) 2>/dev/null | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'` if test -n "$searchpath"; then acl_save_IFS="${IFS= }"; IFS=":" for searchdir in $searchpath; do if test -d "$searchdir"; then case "$searchdir" in */lib64/ | */lib64 ) acl_libdirstem=lib64 ;; *) searchdir=`cd "$searchdir" && pwd` case "$searchdir" in */lib64 ) acl_libdirstem=lib64 ;; esac ;; esac fi done IFS="$acl_save_IFS" fi use_additional=yes acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval additional_includedir=\"$includedir\" eval additional_libdir=\"$libdir\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" # Check whether --with-libiconv-prefix was given. if test "${with_libiconv_prefix+set}" = set; then withval=$with_libiconv_prefix; if test "X$withval" = "Xno"; then use_additional=no else if test "X$withval" = "X"; then acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval additional_includedir=\"$includedir\" eval additional_libdir=\"$libdir\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" else additional_includedir="$withval/include" additional_libdir="$withval/$acl_libdirstem" fi fi fi LIBICONV= LTLIBICONV= INCICONV= rpathdirs= ltrpathdirs= names_already_handled= names_next_round='iconv ' while test -n "$names_next_round"; do names_this_round="$names_next_round" names_next_round= for name in $names_this_round; do already_handled= for n in $names_already_handled; do if test "$n" = "$name"; then already_handled=yes break fi done if test -z "$already_handled"; then names_already_handled="$names_already_handled $name" uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'` eval value=\"\$HAVE_LIB$uppername\" if test -n "$value"; then if test "$value" = yes; then eval value=\"\$LIB$uppername\" test -z "$value" || LIBICONV="${LIBICONV}${LIBICONV:+ }$value" eval value=\"\$LTLIB$uppername\" test -z "$value" || LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$value" else : fi else found_dir= found_la= found_so= found_a= if test $use_additional = yes; then if test -n "$shlibext" \ && { test -f "$additional_libdir/lib$name.$shlibext" \ || { test "$shlibext" = dll \ && test -f "$additional_libdir/lib$name.dll.a"; }; }; then found_dir="$additional_libdir" if test -f "$additional_libdir/lib$name.$shlibext"; then found_so="$additional_libdir/lib$name.$shlibext" else found_so="$additional_libdir/lib$name.dll.a" fi if test -f "$additional_libdir/lib$name.la"; then found_la="$additional_libdir/lib$name.la" fi else if test -f "$additional_libdir/lib$name.$libext"; then found_dir="$additional_libdir" found_a="$additional_libdir/lib$name.$libext" if test -f "$additional_libdir/lib$name.la"; then found_la="$additional_libdir/lib$name.la" fi fi fi fi if test "X$found_dir" = "X"; then for x in $LDFLAGS $LTLIBICONV; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" case "$x" in -L*) dir=`echo "X$x" | sed -e 's/^X-L//'` if test -n "$shlibext" \ && { test -f "$dir/lib$name.$shlibext" \ || { test "$shlibext" = dll \ && test -f "$dir/lib$name.dll.a"; }; }; then found_dir="$dir" if test -f "$dir/lib$name.$shlibext"; then found_so="$dir/lib$name.$shlibext" else found_so="$dir/lib$name.dll.a" fi if test -f "$dir/lib$name.la"; then found_la="$dir/lib$name.la" fi else if test -f "$dir/lib$name.$libext"; then found_dir="$dir" found_a="$dir/lib$name.$libext" if test -f "$dir/lib$name.la"; then found_la="$dir/lib$name.la" fi fi fi ;; esac if test "X$found_dir" != "X"; then break fi done fi if test "X$found_dir" != "X"; then LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$found_dir -l$name" if test "X$found_so" != "X"; then if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/$acl_libdirstem"; then LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" else haveit= for x in $ltrpathdirs; do if test "X$x" = "X$found_dir"; then haveit=yes break fi done if test -z "$haveit"; then ltrpathdirs="$ltrpathdirs $found_dir" fi if test "$hardcode_direct" = yes; then LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" else if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" haveit= for x in $rpathdirs; do if test "X$x" = "X$found_dir"; then haveit=yes break fi done if test -z "$haveit"; then rpathdirs="$rpathdirs $found_dir" fi else haveit= for x in $LDFLAGS $LIBICONV; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" if test "X$x" = "X-L$found_dir"; then haveit=yes break fi done if test -z "$haveit"; then LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir" fi if test "$hardcode_minus_L" != no; then LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" else LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name" fi fi fi fi else if test "X$found_a" != "X"; then LIBICONV="${LIBICONV}${LIBICONV:+ }$found_a" else LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir -l$name" fi fi additional_includedir= case "$found_dir" in */$acl_libdirstem | */$acl_libdirstem/) basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'` additional_includedir="$basedir/include" ;; esac if test "X$additional_includedir" != "X"; then if test "X$additional_includedir" != "X/usr/include"; then haveit= if test "X$additional_includedir" = "X/usr/local/include"; then if test -n "$GCC"; then case $host_os in linux* | gnu* | k*bsd*-gnu) haveit=yes;; esac fi fi if test -z "$haveit"; then for x in $CPPFLAGS $INCICONV; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" if test "X$x" = "X-I$additional_includedir"; then haveit=yes break fi done if test -z "$haveit"; then if test -d "$additional_includedir"; then INCICONV="${INCICONV}${INCICONV:+ }-I$additional_includedir" fi fi fi fi fi if test -n "$found_la"; then save_libdir="$libdir" case "$found_la" in */* | *\\*) . "$found_la" ;; *) . "./$found_la" ;; esac libdir="$save_libdir" for dep in $dependency_libs; do case "$dep" in -L*) additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'` if test "X$additional_libdir" != "X/usr/$acl_libdirstem"; then haveit= if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem"; then if test -n "$GCC"; then case $host_os in linux* | gnu* | k*bsd*-gnu) haveit=yes;; esac fi fi if test -z "$haveit"; then haveit= for x in $LDFLAGS $LIBICONV; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" if test "X$x" = "X-L$additional_libdir"; then haveit=yes break fi done if test -z "$haveit"; then if test -d "$additional_libdir"; then LIBICONV="${LIBICONV}${LIBICONV:+ }-L$additional_libdir" fi fi haveit= for x in $LDFLAGS $LTLIBICONV; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" if test "X$x" = "X-L$additional_libdir"; then haveit=yes break fi done if test -z "$haveit"; then if test -d "$additional_libdir"; then LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$additional_libdir" fi fi fi fi ;; -R*) dir=`echo "X$dep" | sed -e 's/^X-R//'` if test "$enable_rpath" != no; then haveit= for x in $rpathdirs; do if test "X$x" = "X$dir"; then haveit=yes break fi done if test -z "$haveit"; then rpathdirs="$rpathdirs $dir" fi haveit= for x in $ltrpathdirs; do if test "X$x" = "X$dir"; then haveit=yes break fi done if test -z "$haveit"; then ltrpathdirs="$ltrpathdirs $dir" fi fi ;; -l*) names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` ;; *.la) names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` ;; *) LIBICONV="${LIBICONV}${LIBICONV:+ }$dep" LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$dep" ;; esac done fi else LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name" LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-l$name" fi fi fi done done if test "X$rpathdirs" != "X"; then if test -n "$hardcode_libdir_separator"; then alldirs= for found_dir in $rpathdirs; do alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir" done acl_save_libdir="$libdir" libdir="$alldirs" eval flag=\"$hardcode_libdir_flag_spec\" libdir="$acl_save_libdir" LIBICONV="${LIBICONV}${LIBICONV:+ }$flag" else for found_dir in $rpathdirs; do acl_save_libdir="$libdir" libdir="$found_dir" eval flag=\"$hardcode_libdir_flag_spec\" libdir="$acl_save_libdir" LIBICONV="${LIBICONV}${LIBICONV:+ }$flag" done fi fi if test "X$ltrpathdirs" != "X"; then for found_dir in $ltrpathdirs; do LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-R$found_dir" done fi am_save_CPPFLAGS="$CPPFLAGS" for element in $INCICONV; do haveit= for x in $CPPFLAGS; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" if test "X$x" = "X$element"; then haveit=yes break fi done if test -z "$haveit"; then CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element" fi done { echo "$as_me:$LINENO: checking for iconv" >&5 echo $ECHO_N "checking for iconv... $ECHO_C" >&6; } if test "${am_cv_func_iconv+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else am_cv_func_iconv="no, consider installing GNU libiconv" am_cv_lib_iconv=no cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include int main () { iconv_t cd = iconv_open("",""); iconv(cd,NULL,NULL,NULL,NULL); iconv_close(cd); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && $as_test_x conftest$ac_exeext; then am_cv_func_iconv=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext if test "$am_cv_func_iconv" != yes; then am_save_LIBS="$LIBS" LIBS="$LIBS $LIBICONV" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include int main () { iconv_t cd = iconv_open("",""); iconv(cd,NULL,NULL,NULL,NULL); iconv_close(cd); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && $as_test_x conftest$ac_exeext; then am_cv_lib_iconv=yes am_cv_func_iconv=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LIBS="$am_save_LIBS" fi fi { echo "$as_me:$LINENO: result: $am_cv_func_iconv" >&5 echo "${ECHO_T}$am_cv_func_iconv" >&6; } if test "$am_cv_func_iconv" = yes; then cat >>confdefs.h <<\_ACEOF #define HAVE_ICONV 1 _ACEOF fi if test "$am_cv_lib_iconv" = yes; then { echo "$as_me:$LINENO: checking how to link with libiconv" >&5 echo $ECHO_N "checking how to link with libiconv... $ECHO_C" >&6; } { echo "$as_me:$LINENO: result: $LIBICONV" >&5 echo "${ECHO_T}$LIBICONV" >&6; } else CPPFLAGS="$am_save_CPPFLAGS" LIBICONV= LTLIBICONV= fi if test "$am_cv_func_iconv" = yes; then { echo "$as_me:$LINENO: checking for iconv declaration" >&5 echo $ECHO_N "checking for iconv declaration... $ECHO_C" >&6; } if test "${am_cv_proto_iconv+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include extern #ifdef __cplusplus "C" #endif #if defined(__STDC__) || defined(__cplusplus) size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft); #else size_t iconv(); #endif int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then am_cv_proto_iconv_arg1="" else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 am_cv_proto_iconv_arg1="const" fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);" fi am_cv_proto_iconv=`echo "$am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'` { echo "$as_me:$LINENO: result: ${ac_t:- }$am_cv_proto_iconv" >&5 echo "${ECHO_T}${ac_t:- }$am_cv_proto_iconv" >&6; } cat >>confdefs.h <<_ACEOF #define ICONV_CONST $am_cv_proto_iconv_arg1 _ACEOF fi for ac_header in langinfo.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then { echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 fi ac_res=`eval echo '${'$as_ac_Header'}'` { echo "$as_me:$LINENO: result: $ac_res" >&5 echo "${ECHO_T}$ac_res" >&6; } else # Is the header compilable? { echo "$as_me:$LINENO: checking $ac_header usability" >&5 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext { echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 echo "${ECHO_T}$ac_header_compiler" >&6; } # Is the header present? { echo "$as_me:$LINENO: checking $ac_header presence" >&5 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <$ac_header> _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext { echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 echo "${ECHO_T}$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in yes:no: ) { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} ac_header_preproc=yes ;; no:yes:* ) { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} ( cat <<\_ASBOX ## ---------------------------- ## ## Report this to zany@triq.net ## ## ---------------------------- ## _ASBOX ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac { echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 else eval "$as_ac_Header=\$ac_header_preproc" fi ac_res=`eval echo '${'$as_ac_Header'}'` { echo "$as_me:$LINENO: result: $ac_res" >&5 echo "${ECHO_T}$ac_res" >&6; } fi if test `eval echo '${'$as_ac_Header'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done # Check whether --enable-bluetooth was given. if test "${enable_bluetooth+set}" = set; then enableval=$enable_bluetooth; ac_bluetooth_enabled=$enableval else ac_bluetooth_enabled=yes fi if test "$ac_bluetooth_enabled" = yes; then case $host in *-*-linux*) pkg_failed=no { echo "$as_me:$LINENO: checking for BLUETOOTH" >&5 echo $ECHO_N "checking for BLUETOOTH... $ECHO_C" >&6; } if test -n "$PKG_CONFIG"; then if test -n "$BLUETOOTH_CFLAGS"; then pkg_cv_BLUETOOTH_CFLAGS="$BLUETOOTH_CFLAGS" else if test -n "$PKG_CONFIG" && \ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"bluez\"") >&5 ($PKG_CONFIG --exists --print-errors "bluez") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then pkg_cv_BLUETOOTH_CFLAGS=`$PKG_CONFIG --cflags "bluez" 2>/dev/null` else pkg_failed=yes fi fi else pkg_failed=untried fi if test -n "$PKG_CONFIG"; then if test -n "$BLUETOOTH_LIBS"; then pkg_cv_BLUETOOTH_LIBS="$BLUETOOTH_LIBS" else if test -n "$PKG_CONFIG" && \ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"bluez\"") >&5 ($PKG_CONFIG --exists --print-errors "bluez") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then pkg_cv_BLUETOOTH_LIBS=`$PKG_CONFIG --libs "bluez" 2>/dev/null` else pkg_failed=yes fi fi else pkg_failed=untried fi if test $pkg_failed = yes; then if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then _pkg_short_errors_supported=yes else _pkg_short_errors_supported=no fi if test $_pkg_short_errors_supported = yes; then BLUETOOTH_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "bluez"` else BLUETOOTH_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "bluez"` fi # Put the nasty error message in config.log where it belongs echo "$BLUETOOTH_PKG_ERRORS" >&5 { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } elif test $pkg_failed = untried; then { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } else BLUETOOTH_CFLAGS=$pkg_cv_BLUETOOTH_CFLAGS BLUETOOTH_LIBS=$pkg_cv_BLUETOOTH_LIBS { echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6; } bluez_found=yes fi ;; *-*-freebsd*) { echo "$as_me:$LINENO: checking for FreeBSD Bluetooth support" >&5 echo $ECHO_N "checking for FreeBSD Bluetooth support... $ECHO_C" >&6; } if test "${freebsdbt_found+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include int main () { struct sockaddr_rfcomm *rfcomm; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then freebsdbt_found=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 freebsdbt_found=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { echo "$as_me:$LINENO: result: $freebsdbt_found" >&5 echo "${ECHO_T}$freebsdbt_found" >&6; } if test "${freebsdbt_found}" = "yes"; then BLUETOOTH_LIBS=-lbluetooth fi ;; *-*-netbsd*) { echo "$as_me:$LINENO: checking for NetBSD Bluetooth support" >&5 echo $ECHO_N "checking for NetBSD Bluetooth support... $ECHO_C" >&6; } if test "${netbsdbt_found+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include int main () { struct sockaddr_bt *bt; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then netbsdbt_found=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 netbsdbt_found=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { echo "$as_me:$LINENO: result: $netbsdbt_found" >&5 echo "${ECHO_T}$netbsdbt_found" >&6; } ;; *-*-mingw32*) if test "${winbt_found+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else for ac_header in ws2bth.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` { echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then eval "$as_ac_Header=yes" else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 eval "$as_ac_Header=no" fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi ac_res=`eval echo '${'$as_ac_Header'}'` { echo "$as_me:$LINENO: result: $ac_res" >&5 echo "${ECHO_T}$ac_res" >&6; } if test `eval echo '${'$as_ac_Header'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF winbt_found=yes else winbt_found=no fi done fi { echo "$as_me:$LINENO: checking for Windows Bluetooth support" >&5 echo $ECHO_N "checking for Windows Bluetooth support... $ECHO_C" >&6; } { echo "$as_me:$LINENO: result: $winbt_found" >&5 echo "${ECHO_T}$winbt_found" >&6; } ;; esac if test "${netbsdbt_found}" = "yes" -o "${freebsdbt_found}" = "yes" -o "${bluez_found}" = "yes" -o "${winbt_found}" = "yes"; then cat >>confdefs.h <<\_ACEOF #define HAVE_BLUETOOTH 1 _ACEOF fi fi if test "${bluez_found}" = "yes"; then REQUIRES="$REQUIRES bluez" { echo "$as_me:$LINENO: checking for Bluetooth SDP support" >&5 echo $ECHO_N "checking for Bluetooth SDP support... $ECHO_C" >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include int main () { sdp_list_t sdplist; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then am_cv_sdplib_found=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 am_cv_sdplib_found=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if test $am_cv_sdplib_found = yes; then cat >>confdefs.h <<\_ACEOF #define HAVE_SDPLIB 1 _ACEOF fi { echo "$as_me:$LINENO: result: $am_cv_sdplib_found" >&5 echo "${ECHO_T}$am_cv_sdplib_found" >&6; } fi { echo "$as_me:$LINENO: checking for USB support" >&5 echo $ECHO_N "checking for USB support... $ECHO_C" >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include int main () { obex_usb_intf_t usb_intf; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then am_cv_usb_found=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 am_cv_usb_found=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if test $am_cv_usb_found = yes; then cat >>confdefs.h <<\_ACEOF #define HAVE_USB 1 _ACEOF fi { echo "$as_me:$LINENO: result: $am_cv_usb_found" >&5 echo "${ECHO_T}$am_cv_usb_found" >&6; } if test "${am_cv_usb_found}" = "yes"; then REQUIRES="$REQUIRES libusb" fi # check for optional swig rebuild # Check whether --enable-swig was given. if test "${enable_swig+set}" = set; then enableval=$enable_swig; case "${enableval}" in yes) want_swig_rebuild=true ;; no) want_swig_rebuild=false ;; *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for --enable-swig" >&5 echo "$as_me: error: bad value ${enableval} for --enable-swig" >&2;} { (exit 1); exit 1; }; } ;; esac else want_swig_rebuild=false fi if test x$want_swig_rebuild = xtrue; then ENABLE_SWIG_TRUE= ENABLE_SWIG_FALSE='#' else ENABLE_SWIG_TRUE='#' ENABLE_SWIG_FALSE= fi if test x$want_swig_rebuild = xtrue; then # Extract the first word of "swig", so it can be a program name with args. set dummy swig; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_path_SWIG+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else case $SWIG in [\\/]* | ?:[\\/]*) ac_cv_path_SWIG="$SWIG" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_SWIG="$as_dir/$ac_word$ac_exec_ext" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi SWIG=$ac_cv_path_SWIG if test -n "$SWIG"; then { echo "$as_me:$LINENO: result: $SWIG" >&5 echo "${ECHO_T}$SWIG" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi if test -z "$SWIG" ; then { echo "$as_me:$LINENO: WARNING: cannot find 'swig' program. You should look at http://www.swig.org" >&5 echo "$as_me: WARNING: cannot find 'swig' program. You should look at http://www.swig.org" >&2;} SWIG='echo "Error: SWIG is not installed. You should look at http://www.swig.org" ; false' elif test -n "1.3.7" ; then { echo "$as_me:$LINENO: checking for SWIG version" >&5 echo $ECHO_N "checking for SWIG version... $ECHO_C" >&6; } swig_version=`$SWIG -version 2>&1 | grep 'SWIG Version' | sed 's/.*\([0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\).*/\1/g'` { echo "$as_me:$LINENO: result: $swig_version" >&5 echo "${ECHO_T}$swig_version" >&6; } if test -n "$swig_version" ; then # Calculate the required version number components required=1.3.7 required_major=`echo $required | sed 's/[^0-9].*//'` if test -z "$required_major" ; then required_major=0 fi required=`echo $required | sed 's/[0-9]*[^0-9]//'` required_minor=`echo $required | sed 's/[^0-9].*//'` if test -z "$required_minor" ; then required_minor=0 fi required=`echo $required | sed 's/[0-9]*[^0-9]//'` required_patch=`echo $required | sed 's/[^0-9].*//'` if test -z "$required_patch" ; then required_patch=0 fi # Calculate the available version number components available=$swig_version available_major=`echo $available | sed 's/[^0-9].*//'` if test -z "$available_major" ; then available_major=0 fi available=`echo $available | sed 's/[0-9]*[^0-9]//'` available_minor=`echo $available | sed 's/[^0-9].*//'` if test -z "$available_minor" ; then available_minor=0 fi available=`echo $available | sed 's/[0-9]*[^0-9]//'` available_patch=`echo $available | sed 's/[^0-9].*//'` if test -z "$available_patch" ; then available_patch=0 fi if test $available_major -ne $required_major \ -o $available_minor -ne $required_minor \ -o $available_patch -lt $required_patch ; then { echo "$as_me:$LINENO: WARNING: SWIG version >= 1.3.7 is required. You have $swig_version. You should look at http://www.swig.org" >&5 echo "$as_me: WARNING: SWIG version >= 1.3.7 is required. You have $swig_version. You should look at http://www.swig.org" >&2;} SWIG='echo "Error: SWIG version >= 1.3.7 is required. You have '"$swig_version"'. You should look at http://www.swig.org" ; false' else { echo "$as_me:$LINENO: SWIG executable is '$SWIG'" >&5 echo "$as_me: SWIG executable is '$SWIG'" >&6;} SWIG_LIB=`$SWIG -swiglib` { echo "$as_me:$LINENO: SWIG library directory is '$SWIG_LIB'" >&5 echo "$as_me: SWIG library directory is '$SWIG_LIB'" >&6;} fi else { echo "$as_me:$LINENO: WARNING: cannot determine SWIG version" >&5 echo "$as_me: WARNING: cannot determine SWIG version" >&2;} SWIG='echo "Error: Cannot determine SWIG version. You should look at http://www.swig.org" ; false' fi fi fi # check for language bindings # Check whether --enable-perl was given. if test "${enable_perl+set}" = set; then enableval=$enable_perl; ac_perl_enabled=$enableval else # Extract the first word of "perl", so it can be a program name with args. set dummy perl; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_perl_enabled+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_perl_enabled"; then ac_cv_prog_ac_perl_enabled="$ac_perl_enabled" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_perl_enabled="yes" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS test -z "$ac_cv_prog_ac_perl_enabled" && ac_cv_prog_ac_perl_enabled="no" fi fi ac_perl_enabled=$ac_cv_prog_ac_perl_enabled if test -n "$ac_perl_enabled"; then { echo "$as_me:$LINENO: result: $ac_perl_enabled" >&5 echo "${ECHO_T}$ac_perl_enabled" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi fi if test "$ac_perl_enabled" = yes; then # Extract the first word of "perl", so it can be a program name with args. set dummy perl; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_path_PERL+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else case $PERL in [\\/]* | ?:[\\/]*) ac_cv_path_PERL="$PERL" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_PERL="$as_dir/$ac_word$ac_exec_ext" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi PERL=$ac_cv_path_PERL if test -n "$PERL"; then { echo "$as_me:$LINENO: result: $PERL" >&5 echo "${ECHO_T}$PERL" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi fi if test x"$PERL" != x""; then ENABLE_PERL_TRUE= ENABLE_PERL_FALSE='#' else ENABLE_PERL_TRUE='#' ENABLE_PERL_FALSE= fi # Check whether --enable-python was given. if test "${enable_python+set}" = set; then enableval=$enable_python; ac_python_enabled=$enableval else # Extract the first word of "python[$PYTHON_VERSION]", so it can be a program name with args. set dummy python$PYTHON_VERSION; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_python_enabled+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_python_enabled"; then ac_cv_prog_ac_python_enabled="$ac_python_enabled" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_python_enabled="yes" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS test -z "$ac_cv_prog_ac_python_enabled" && ac_cv_prog_ac_python_enabled="no" fi fi ac_python_enabled=$ac_cv_prog_ac_python_enabled if test -n "$ac_python_enabled"; then { echo "$as_me:$LINENO: result: $ac_python_enabled" >&5 echo "${ECHO_T}$ac_python_enabled" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi fi if test "$ac_python_enabled" = yes; then # Find any Python interpreter. if test -z "$PYTHON"; then for ac_prog in python python2 python2.5 python2.4 python2.3 python2.2 python2.1 python2.0 python1.6 python1.5 do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_path_PYTHON+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else case $PYTHON in [\\/]* | ?:[\\/]*) ac_cv_path_PYTHON="$PYTHON" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_PYTHON="$as_dir/$ac_word$ac_exec_ext" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi PYTHON=$ac_cv_path_PYTHON if test -n "$PYTHON"; then { echo "$as_me:$LINENO: result: $PYTHON" >&5 echo "${ECHO_T}$PYTHON" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi test -n "$PYTHON" && break done test -n "$PYTHON" || PYTHON=":" fi am_display_PYTHON=python if test "$PYTHON" = :; then { { echo "$as_me:$LINENO: error: no suitable Python interpreter found" >&5 echo "$as_me: error: no suitable Python interpreter found" >&2;} { (exit 1); exit 1; }; } else { echo "$as_me:$LINENO: checking for $am_display_PYTHON version" >&5 echo $ECHO_N "checking for $am_display_PYTHON version... $ECHO_C" >&6; } if test "${am_cv_python_version+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else am_cv_python_version=`$PYTHON -c "import sys; print sys.version[:3]"` fi { echo "$as_me:$LINENO: result: $am_cv_python_version" >&5 echo "${ECHO_T}$am_cv_python_version" >&6; } PYTHON_VERSION=$am_cv_python_version PYTHON_PREFIX='${prefix}' PYTHON_EXEC_PREFIX='${exec_prefix}' { echo "$as_me:$LINENO: checking for $am_display_PYTHON platform" >&5 echo $ECHO_N "checking for $am_display_PYTHON platform... $ECHO_C" >&6; } if test "${am_cv_python_platform+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else am_cv_python_platform=`$PYTHON -c "import sys; print sys.platform"` fi { echo "$as_me:$LINENO: result: $am_cv_python_platform" >&5 echo "${ECHO_T}$am_cv_python_platform" >&6; } PYTHON_PLATFORM=$am_cv_python_platform { echo "$as_me:$LINENO: checking for $am_display_PYTHON script directory" >&5 echo $ECHO_N "checking for $am_display_PYTHON script directory... $ECHO_C" >&6; } if test "${am_cv_python_pythondir+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else am_cv_python_pythondir=`$PYTHON -c "from distutils import sysconfig; print sysconfig.get_python_lib(0,0,prefix='$PYTHON_PREFIX')" 2>/dev/null || echo "$PYTHON_PREFIX/lib/python$PYTHON_VERSION/site-packages"` fi { echo "$as_me:$LINENO: result: $am_cv_python_pythondir" >&5 echo "${ECHO_T}$am_cv_python_pythondir" >&6; } pythondir=$am_cv_python_pythondir pkgpythondir=\${pythondir}/$PACKAGE { echo "$as_me:$LINENO: checking for $am_display_PYTHON extension module directory" >&5 echo $ECHO_N "checking for $am_display_PYTHON extension module directory... $ECHO_C" >&6; } if test "${am_cv_python_pyexecdir+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else am_cv_python_pyexecdir=`$PYTHON -c "from distutils import sysconfig; print sysconfig.get_python_lib(1,0,prefix='$PYTHON_EXEC_PREFIX')" 2>/dev/null || echo "${PYTHON_EXEC_PREFIX}/lib/python${PYTHON_VERSION}/site-packages"` fi { echo "$as_me:$LINENO: result: $am_cv_python_pyexecdir" >&5 echo "${ECHO_T}$am_cv_python_pyexecdir" >&6; } pyexecdir=$am_cv_python_pyexecdir pkgpyexecdir=\${pyexecdir}/$PACKAGE fi fi if test x"$PYTHON" != x""; then ENABLE_PYTHON_TRUE= ENABLE_PYTHON_FALSE='#' else ENABLE_PYTHON_TRUE='#' ENABLE_PYTHON_FALSE= fi # Check whether --enable-ruby was given. if test "${enable_ruby+set}" = set; then enableval=$enable_ruby; ac_ruby_enabled=$enableval else # Extract the first word of "ruby", so it can be a program name with args. set dummy ruby; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ruby_enabled+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_ruby_enabled"; then ac_cv_prog_ac_ruby_enabled="$ac_ruby_enabled" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ruby_enabled="yes" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS test -z "$ac_cv_prog_ac_ruby_enabled" && ac_cv_prog_ac_ruby_enabled="no" fi fi ac_ruby_enabled=$ac_cv_prog_ac_ruby_enabled if test -n "$ac_ruby_enabled"; then { echo "$as_me:$LINENO: result: $ac_ruby_enabled" >&5 echo "${ECHO_T}$ac_ruby_enabled" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi fi if test "$ac_ruby_enabled" = yes; then # Extract the first word of "ruby", so it can be a program name with args. set dummy ruby; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_path_RUBY+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else case $RUBY in [\\/]* | ?:[\\/]*) ac_cv_path_RUBY="$RUBY" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_RUBY="$as_dir/$ac_word$ac_exec_ext" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi RUBY=$ac_cv_path_RUBY if test -n "$RUBY"; then { echo "$as_me:$LINENO: result: $RUBY" >&5 echo "${ECHO_T}$RUBY" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi fi if test x"$RUBY" != x""; then ENABLE_RUBY_TRUE= ENABLE_RUBY_FALSE='#' else ENABLE_RUBY_TRUE='#' ENABLE_RUBY_FALSE= fi # Check whether --enable-tcl was given. if test "${enable_tcl+set}" = set; then enableval=$enable_tcl; ac_tcl_enabled=$enableval else # Extract the first word of "tclsh", so it can be a program name with args. set dummy tclsh; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_tcl_enabled+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_tcl_enabled"; then ac_cv_prog_ac_tcl_enabled="$ac_tcl_enabled" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_tcl_enabled="yes" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS test -z "$ac_cv_prog_ac_tcl_enabled" && ac_cv_prog_ac_tcl_enabled="no" fi fi ac_tcl_enabled=$ac_cv_prog_ac_tcl_enabled if test -n "$ac_tcl_enabled"; then { echo "$as_me:$LINENO: result: $ac_tcl_enabled" >&5 echo "${ECHO_T}$ac_tcl_enabled" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi fi if test "$ac_tcl_enabled" = yes; then # Extract the first word of "tclsh", so it can be a program name with args. set dummy tclsh; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_path_TCLSH+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else case $TCLSH in [\\/]* | ?:[\\/]*) ac_cv_path_TCLSH="$TCLSH" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_TCLSH="$as_dir/$ac_word$ac_exec_ext" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS ;; esac fi TCLSH=$ac_cv_path_TCLSH if test -n "$TCLSH"; then { echo "$as_me:$LINENO: result: $TCLSH" >&5 echo "${ECHO_T}$TCLSH" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi fi if test x"$TCLSH" != x""; then ENABLE_TCL_TRUE= ENABLE_TCL_FALSE='#' else ENABLE_TCL_TRUE='#' ENABLE_TCL_FALSE= fi # Check whether --enable-builddocs was given. if test "${enable_builddocs+set}" = set; then enableval=$enable_builddocs; case "${enableval}" in yes) builddocs=true ;; no) builddocs=false ;; *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for --enable-builddocs" >&5 echo "$as_me: error: bad value ${enableval} for --enable-builddocs" >&2;} { (exit 1); exit 1; }; } ;; esac else builddocs=false fi if test x$builddocs = xtrue; then BUILD_DOCS_TRUE= BUILD_DOCS_FALSE='#' else BUILD_DOCS_TRUE='#' BUILD_DOCS_FALSE= fi cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include int main () { printf(__func__) ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then : else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 cat >>confdefs.h <<\_ACEOF #define __func__ "" _ACEOF fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if test "$ac_cv_c_compiler_gnu" = "yes"; then CFLAGS="$CFLAGS -W -Wundef -Wmissing-declarations -Wmissing-prototypes" fi CFLAGS="$CFLAGS -Wall" # Project-specific settings # VERSION="..." already set my AM_INIT_AUTOMAKE above # libtool uses current:revision:age to produce .c-a.a.r # http://www.gnu.org/software/libtool/manual.html#Updating-version-info OBEXFTP_VERSION="3\:0\:3" MULTICOBEX_VERSION="1\:1\:0" BFB_VERSION="0\:5\:0" # should use AC_CONFIG_FILES ac_config_files="$ac_config_files Makefile swig/perl/Makefile swig/perl/Makefile.PL swig/python/Makefile swig/python/setup.py swig/ruby/Makefile swig/tcl/Makefile swig/Makefile examples/Makefile doc/Makefile apps/Makefile bfb/Makefile multicobex/Makefile obexftp/Makefile obexftp.spec obexftp.pc" cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure # scripts and configure runs, see configure's option --config-cache. # It is not useful on other systems. If it contains results you don't # want to keep, you may remove or edit it. # # config.status only pays attention to the cache file if you give it # the --recheck option to rerun configure. # # `ac_cv_env_foo' variables (set or unset) will be overridden when # loading this file, other *unset* `ac_cv_foo' will be assigned the # following values. _ACEOF # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. # So, we kill variables containing newlines. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. ( for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( *) $as_unset $ac_var ;; esac ;; esac done (set) 2>&1 | case $as_nl`(ac_space=' '; set) 2>&1` in #( *${as_nl}ac_space=\ *) # `set' does not quote correctly, so add quotes (double-quote # substitution turns \\\\ into \\, and sed turns \\ into \). sed -n \ "s/'/'\\\\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" ;; #( *) # `set' quotes correctly as required by POSIX, so do not add quotes. sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; esac | sort ) | sed ' /^ac_cv_env_/b end t clear :clear s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ t end s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ :end' >>confcache if diff "$cache_file" confcache >/dev/null 2>&1; then :; else if test -w "$cache_file"; then test "x$cache_file" != "x/dev/null" && { echo "$as_me:$LINENO: updating cache $cache_file" >&5 echo "$as_me: updating cache $cache_file" >&6;} cat confcache >$cache_file else { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 echo "$as_me: not updating unwritable cache $cache_file" >&6;} fi fi rm -f confcache test "x$prefix" = xNONE && prefix=$ac_default_prefix # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' DEFS=-DHAVE_CONFIG_H ac_libobjs= ac_ltlibobjs= for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue # 1. Remove the extension, and $U if already installed. ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' ac_i=`echo "$ac_i" | sed "$ac_script"` # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR # will be set to the directory where LIBOBJS objects are built. ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' done LIBOBJS=$ac_libobjs LTLIBOBJS=$ac_ltlibobjs if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. Usually this means the macro was only invoked conditionally." >&5 echo "$as_me: error: conditional \"AMDEP\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. Usually this means the macro was only invoked conditionally." >&5 echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. Usually this means the macro was only invoked conditionally." >&5 echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCXX\" was never defined. Usually this means the macro was only invoked conditionally." >&5 echo "$as_me: error: conditional \"am__fastdepCXX\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi if test -z "${ENABLE_SWIG_TRUE}" && test -z "${ENABLE_SWIG_FALSE}"; then { { echo "$as_me:$LINENO: error: conditional \"ENABLE_SWIG\" was never defined. Usually this means the macro was only invoked conditionally." >&5 echo "$as_me: error: conditional \"ENABLE_SWIG\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi if test -z "${ENABLE_PERL_TRUE}" && test -z "${ENABLE_PERL_FALSE}"; then { { echo "$as_me:$LINENO: error: conditional \"ENABLE_PERL\" was never defined. Usually this means the macro was only invoked conditionally." >&5 echo "$as_me: error: conditional \"ENABLE_PERL\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi if test -z "${ENABLE_PYTHON_TRUE}" && test -z "${ENABLE_PYTHON_FALSE}"; then { { echo "$as_me:$LINENO: error: conditional \"ENABLE_PYTHON\" was never defined. Usually this means the macro was only invoked conditionally." >&5 echo "$as_me: error: conditional \"ENABLE_PYTHON\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi if test -z "${ENABLE_RUBY_TRUE}" && test -z "${ENABLE_RUBY_FALSE}"; then { { echo "$as_me:$LINENO: error: conditional \"ENABLE_RUBY\" was never defined. Usually this means the macro was only invoked conditionally." >&5 echo "$as_me: error: conditional \"ENABLE_RUBY\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi if test -z "${ENABLE_TCL_TRUE}" && test -z "${ENABLE_TCL_FALSE}"; then { { echo "$as_me:$LINENO: error: conditional \"ENABLE_TCL\" was never defined. Usually this means the macro was only invoked conditionally." >&5 echo "$as_me: error: conditional \"ENABLE_TCL\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi if test -z "${BUILD_DOCS_TRUE}" && test -z "${BUILD_DOCS_FALSE}"; then { { echo "$as_me:$LINENO: error: conditional \"BUILD_DOCS\" was never defined. Usually this means the macro was only invoked conditionally." >&5 echo "$as_me: error: conditional \"BUILD_DOCS\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi : ${CONFIG_STATUS=./config.status} ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files $CONFIG_STATUS" { echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 echo "$as_me: creating $CONFIG_STATUS" >&6;} cat >$CONFIG_STATUS <<_ACEOF #! $SHELL # Generated by $as_me. # Run this file to recreate the current configuration. # Compiler output produced by configure, useful for debugging # configure, is in config.log if it exists. debug=false ac_cs_recheck=false ac_cs_silent=false SHELL=\${CONFIG_SHELL-$SHELL} _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF ## --------------------- ## ## M4sh Initialization. ## ## --------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac fi # PATH needs CR # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then echo "#! /bin/sh" >conf$$.sh echo "exit 0" >>conf$$.sh chmod +x conf$$.sh if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi rm -f conf$$.sh fi # Support unset when possible. if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then as_unset=unset else as_unset=false fi # IFS # We need space, tab and new line, in precisely that order. Quoting is # there to prevent editors from complaining about space-tab. # (If _AS_PATH_WALK were called with IFS unset, it would disable word # splitting by setting IFS to empty value.) as_nl=' ' IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. case $0 in *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done IFS=$as_save_IFS ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 { (exit 1); exit 1; } fi # Work around bugs in pre-3.0 UWIN ksh. for as_var in ENV MAIL MAILPATH do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. for as_var in \ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ LC_TELEPHONE LC_TIME do if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then eval $as_var=C; export $as_var else ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var fi done # Required to use basename. if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi # Name of the executable. as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` # CDPATH. $as_unset CDPATH as_lineno_1=$LINENO as_lineno_2=$LINENO test "x$as_lineno_1" != "x$as_lineno_2" && test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { # Create $as_me.lineno as a copy of $as_myself, but with $LINENO # uniformly replaced by the line number. The first 'sed' inserts a # line-number line after each line using $LINENO; the second 'sed' # does the real work. The second script uses 'N' to pair each # line-number line with the line containing $LINENO, and appends # trailing '-' during substitution so that $LINENO is not a special # case at line end. # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the # scripts with optimization help from Paolo Bonzini. Blame Lee # E. McMahon (1931-1989) for sed's syntax. :-) sed -n ' p /[$]LINENO/= ' <$as_myself | sed ' s/[$]LINENO.*/&-/ t lineno b :lineno N :loop s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ t loop s/-\n.*// ' >$as_me.lineno && chmod +x "$as_me.lineno" || { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 { (exit 1); exit 1; }; } # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the # original and so on. Autoconf is especially sensitive to this). . "./$as_me.lineno" # Exit status is that of the last command. exit } if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then as_dirname=dirname else as_dirname=false fi ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in -n*) case `echo 'x\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. *) ECHO_C='\c';; esac;; *) ECHO_N='-n';; esac if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir mkdir conf$$.dir fi echo >conf$$.file if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. # In both cases, we have to default to `cp -p'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -p' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -p' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null if mkdir -p . 2>/dev/null; then as_mkdir_p=: else test -d ./-p && rmdir ./-p as_mkdir_p=false fi if test -x / >/dev/null 2>&1; then as_test_x='test -x' else if ls -dL / >/dev/null 2>&1; then as_ls_L_option=L else as_ls_L_option= fi as_test_x=' eval sh -c '\'' if test -d "$1"; then test -d "$1/."; else case $1 in -*)set "./$1";; esac; case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in ???[sx]*):;;*)false;;esac;fi '\'' sh ' fi as_executable_p=$as_test_x # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" exec 6>&1 # Save the log message, to keep $[0] and so on meaningful, and to # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" This file was extended by ObexFTP $as_me 0.23, which was generated by GNU Autoconf 2.61. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS CONFIG_LINKS = $CONFIG_LINKS CONFIG_COMMANDS = $CONFIG_COMMANDS $ $0 $@ on `(hostname || uname -n) 2>/dev/null | sed 1q` " _ACEOF cat >>$CONFIG_STATUS <<_ACEOF # Files that config.status was made for. config_files="$ac_config_files" config_headers="$ac_config_headers" config_commands="$ac_config_commands" _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF ac_cs_usage="\ \`$as_me' instantiates files from templates according to the current configuration. Usage: $0 [OPTIONS] [FILE]... -h, --help print this help, then exit -V, --version print version number and configuration settings, then exit -q, --quiet do not print progress messages -d, --debug don't remove temporary files --recheck update $as_me by reconfiguring in the same conditions --file=FILE[:TEMPLATE] instantiate the configuration file FILE --header=FILE[:TEMPLATE] instantiate the configuration header FILE Configuration files: $config_files Configuration headers: $config_headers Configuration commands: $config_commands Report bugs to ." _ACEOF cat >>$CONFIG_STATUS <<_ACEOF ac_cs_version="\\ ObexFTP config.status 0.23 configured by $0, generated by GNU Autoconf 2.61, with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" Copyright (C) 2006 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." ac_pwd='$ac_pwd' srcdir='$srcdir' INSTALL='$INSTALL' _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF # If no file are specified by the user, then we need to provide default # value. By we need to know if files were specified by the user. ac_need_defaults=: while test $# != 0 do case $1 in --*=*) ac_option=`expr "X$1" : 'X\([^=]*\)='` ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` ac_shift=: ;; *) ac_option=$1 ac_optarg=$2 ac_shift=shift ;; esac case $ac_option in # Handling of the options. -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ac_cs_recheck=: ;; --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) echo "$ac_cs_version"; exit ;; --debug | --debu | --deb | --de | --d | -d ) debug=: ;; --file | --fil | --fi | --f ) $ac_shift CONFIG_FILES="$CONFIG_FILES $ac_optarg" ac_need_defaults=false;; --header | --heade | --head | --hea ) $ac_shift CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" ac_need_defaults=false;; --he | --h) # Conflict between --help and --header { echo "$as_me: error: ambiguous option: $1 Try \`$0 --help' for more information." >&2 { (exit 1); exit 1; }; };; --help | --hel | -h ) echo "$ac_cs_usage"; exit ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil | --si | --s) ac_cs_silent=: ;; # This is an error. -*) { echo "$as_me: error: unrecognized option: $1 Try \`$0 --help' for more information." >&2 { (exit 1); exit 1; }; } ;; *) ac_config_targets="$ac_config_targets $1" ac_need_defaults=false ;; esac shift done ac_configure_extra_args= if $ac_cs_silent; then exec 6>/dev/null ac_configure_extra_args="$ac_configure_extra_args --silent" fi _ACEOF cat >>$CONFIG_STATUS <<_ACEOF if \$ac_cs_recheck; then echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 CONFIG_SHELL=$SHELL export CONFIG_SHELL exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion fi _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF exec 5>>config.log { echo sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX ## Running $as_me. ## _ASBOX echo "$ac_log" } >&5 _ACEOF cat >>$CONFIG_STATUS <<_ACEOF # # INIT-COMMANDS # AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF # Handling of arguments. for ac_config_target in $ac_config_targets do case $ac_config_target in "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; "swig/perl/Makefile") CONFIG_FILES="$CONFIG_FILES swig/perl/Makefile" ;; "swig/perl/Makefile.PL") CONFIG_FILES="$CONFIG_FILES swig/perl/Makefile.PL" ;; "swig/python/Makefile") CONFIG_FILES="$CONFIG_FILES swig/python/Makefile" ;; "swig/python/setup.py") CONFIG_FILES="$CONFIG_FILES swig/python/setup.py" ;; "swig/ruby/Makefile") CONFIG_FILES="$CONFIG_FILES swig/ruby/Makefile" ;; "swig/tcl/Makefile") CONFIG_FILES="$CONFIG_FILES swig/tcl/Makefile" ;; "swig/Makefile") CONFIG_FILES="$CONFIG_FILES swig/Makefile" ;; "examples/Makefile") CONFIG_FILES="$CONFIG_FILES examples/Makefile" ;; "doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;; "apps/Makefile") CONFIG_FILES="$CONFIG_FILES apps/Makefile" ;; "bfb/Makefile") CONFIG_FILES="$CONFIG_FILES bfb/Makefile" ;; "multicobex/Makefile") CONFIG_FILES="$CONFIG_FILES multicobex/Makefile" ;; "obexftp/Makefile") CONFIG_FILES="$CONFIG_FILES obexftp/Makefile" ;; "obexftp.spec") CONFIG_FILES="$CONFIG_FILES obexftp.spec" ;; "obexftp.pc") CONFIG_FILES="$CONFIG_FILES obexftp.pc" ;; *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 echo "$as_me: error: invalid argument: $ac_config_target" >&2;} { (exit 1); exit 1; }; };; esac done # If the user did not use the arguments to specify the items to instantiate, # then the envvar interface is used. Set only those that are not. # We use the long form for the default assignment because of an extremely # bizarre bug on SunOS 4.1.3. if $ac_need_defaults; then test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands fi # Have a temporary directory for convenience. Make it in the build tree # simply because there is no reason against having it here, and in addition, # creating and moving files from /tmp can sometimes cause problems. # Hook for its removal unless debugging. # Note that there is a small window in which the directory will not be cleaned: # after its creation but before its name has been assigned to `$tmp'. $debug || { tmp= trap 'exit_status=$? { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status ' 0 trap '{ (exit 1); exit 1; }' 1 2 13 15 } # Create a (secure) tmp directory for tmp files. { tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" } || { tmp=./conf$$-$RANDOM (umask 077 && mkdir "$tmp") } || { echo "$me: cannot create a temporary directory in ." >&2 { (exit 1); exit 1; } } # # Set up the sed scripts for CONFIG_FILES section. # # No need to generate the scripts if there are no CONFIG_FILES. # This happens for instance when ./config.status config.h if test -n "$CONFIG_FILES"; then _ACEOF ac_delim='%!_!# ' for ac_last_try in false false false false false :; do cat >conf$$subs.sed <<_ACEOF SHELL!$SHELL$ac_delim PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim PACKAGE_NAME!$PACKAGE_NAME$ac_delim PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim PACKAGE_STRING!$PACKAGE_STRING$ac_delim PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim exec_prefix!$exec_prefix$ac_delim prefix!$prefix$ac_delim program_transform_name!$program_transform_name$ac_delim bindir!$bindir$ac_delim sbindir!$sbindir$ac_delim libexecdir!$libexecdir$ac_delim datarootdir!$datarootdir$ac_delim datadir!$datadir$ac_delim sysconfdir!$sysconfdir$ac_delim sharedstatedir!$sharedstatedir$ac_delim localstatedir!$localstatedir$ac_delim includedir!$includedir$ac_delim oldincludedir!$oldincludedir$ac_delim docdir!$docdir$ac_delim infodir!$infodir$ac_delim htmldir!$htmldir$ac_delim dvidir!$dvidir$ac_delim pdfdir!$pdfdir$ac_delim psdir!$psdir$ac_delim libdir!$libdir$ac_delim localedir!$localedir$ac_delim mandir!$mandir$ac_delim DEFS!$DEFS$ac_delim ECHO_C!$ECHO_C$ac_delim ECHO_N!$ECHO_N$ac_delim ECHO_T!$ECHO_T$ac_delim LIBS!$LIBS$ac_delim build_alias!$build_alias$ac_delim host_alias!$host_alias$ac_delim target_alias!$target_alias$ac_delim INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim INSTALL_DATA!$INSTALL_DATA$ac_delim CYGPATH_W!$CYGPATH_W$ac_delim PACKAGE!$PACKAGE$ac_delim VERSION!$VERSION$ac_delim ACLOCAL!$ACLOCAL$ac_delim AUTOCONF!$AUTOCONF$ac_delim AUTOMAKE!$AUTOMAKE$ac_delim AUTOHEADER!$AUTOHEADER$ac_delim MAKEINFO!$MAKEINFO$ac_delim install_sh!$install_sh$ac_delim STRIP!$STRIP$ac_delim INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim mkdir_p!$mkdir_p$ac_delim AWK!$AWK$ac_delim SET_MAKE!$SET_MAKE$ac_delim am__leading_dot!$am__leading_dot$ac_delim AMTAR!$AMTAR$ac_delim am__tar!$am__tar$ac_delim am__untar!$am__untar$ac_delim CC!$CC$ac_delim CFLAGS!$CFLAGS$ac_delim LDFLAGS!$LDFLAGS$ac_delim CPPFLAGS!$CPPFLAGS$ac_delim ac_ct_CC!$ac_ct_CC$ac_delim EXEEXT!$EXEEXT$ac_delim OBJEXT!$OBJEXT$ac_delim DEPDIR!$DEPDIR$ac_delim am__include!$am__include$ac_delim am__quote!$am__quote$ac_delim AMDEP_TRUE!$AMDEP_TRUE$ac_delim AMDEP_FALSE!$AMDEP_FALSE$ac_delim AMDEPBACKSLASH!$AMDEPBACKSLASH$ac_delim CCDEPMODE!$CCDEPMODE$ac_delim am__fastdepCC_TRUE!$am__fastdepCC_TRUE$ac_delim am__fastdepCC_FALSE!$am__fastdepCC_FALSE$ac_delim LN_S!$LN_S$ac_delim build!$build$ac_delim build_cpu!$build_cpu$ac_delim build_vendor!$build_vendor$ac_delim build_os!$build_os$ac_delim host!$host$ac_delim host_cpu!$host_cpu$ac_delim host_vendor!$host_vendor$ac_delim host_os!$host_os$ac_delim SED!$SED$ac_delim GREP!$GREP$ac_delim EGREP!$EGREP$ac_delim ECHO!$ECHO$ac_delim AR!$AR$ac_delim RANLIB!$RANLIB$ac_delim DSYMUTIL!$DSYMUTIL$ac_delim NMEDIT!$NMEDIT$ac_delim CPP!$CPP$ac_delim CXX!$CXX$ac_delim CXXFLAGS!$CXXFLAGS$ac_delim ac_ct_CXX!$ac_ct_CXX$ac_delim CXXDEPMODE!$CXXDEPMODE$ac_delim am__fastdepCXX_TRUE!$am__fastdepCXX_TRUE$ac_delim _ACEOF if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then break elif $ac_last_try; then { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} { (exit 1); exit 1; }; } else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi done ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` if test -n "$ac_eof"; then ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` ac_eof=`expr $ac_eof + 1` fi cat >>$CONFIG_STATUS <<_ACEOF cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof /@[a-zA-Z_][a-zA-Z_0-9]*@/!b _ACEOF sed ' s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g s/^/s,@/; s/!/@,|#_!!_#|/ :n t n s/'"$ac_delim"'$/,g/; t s/$/\\/; p N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n ' >>$CONFIG_STATUS >$CONFIG_STATUS <<_ACEOF CEOF$ac_eof _ACEOF ac_delim='%!_!# ' for ac_last_try in false false false false false :; do cat >conf$$subs.sed <<_ACEOF am__fastdepCXX_FALSE!$am__fastdepCXX_FALSE$ac_delim CXXCPP!$CXXCPP$ac_delim F77!$F77$ac_delim FFLAGS!$FFLAGS$ac_delim ac_ct_F77!$ac_ct_F77$ac_delim LIBTOOL!$LIBTOOL$ac_delim EXTRA_LIBS!$EXTRA_LIBS$ac_delim PKG_CONFIG!$PKG_CONFIG$ac_delim OPENOBEX_CFLAGS!$OPENOBEX_CFLAGS$ac_delim OPENOBEX_LIBS!$OPENOBEX_LIBS$ac_delim LIBICONV!$LIBICONV$ac_delim LTLIBICONV!$LTLIBICONV$ac_delim BLUETOOTH_CFLAGS!$BLUETOOTH_CFLAGS$ac_delim BLUETOOTH_LIBS!$BLUETOOTH_LIBS$ac_delim ENABLE_SWIG_TRUE!$ENABLE_SWIG_TRUE$ac_delim ENABLE_SWIG_FALSE!$ENABLE_SWIG_FALSE$ac_delim SWIG!$SWIG$ac_delim SWIG_LIB!$SWIG_LIB$ac_delim ac_perl_enabled!$ac_perl_enabled$ac_delim PERL!$PERL$ac_delim ENABLE_PERL_TRUE!$ENABLE_PERL_TRUE$ac_delim ENABLE_PERL_FALSE!$ENABLE_PERL_FALSE$ac_delim ac_python_enabled!$ac_python_enabled$ac_delim PYTHON!$PYTHON$ac_delim PYTHON_VERSION!$PYTHON_VERSION$ac_delim PYTHON_PREFIX!$PYTHON_PREFIX$ac_delim PYTHON_EXEC_PREFIX!$PYTHON_EXEC_PREFIX$ac_delim PYTHON_PLATFORM!$PYTHON_PLATFORM$ac_delim pythondir!$pythondir$ac_delim pkgpythondir!$pkgpythondir$ac_delim pyexecdir!$pyexecdir$ac_delim pkgpyexecdir!$pkgpyexecdir$ac_delim ENABLE_PYTHON_TRUE!$ENABLE_PYTHON_TRUE$ac_delim ENABLE_PYTHON_FALSE!$ENABLE_PYTHON_FALSE$ac_delim ac_ruby_enabled!$ac_ruby_enabled$ac_delim RUBY!$RUBY$ac_delim ENABLE_RUBY_TRUE!$ENABLE_RUBY_TRUE$ac_delim ENABLE_RUBY_FALSE!$ENABLE_RUBY_FALSE$ac_delim ac_tcl_enabled!$ac_tcl_enabled$ac_delim TCLSH!$TCLSH$ac_delim ENABLE_TCL_TRUE!$ENABLE_TCL_TRUE$ac_delim ENABLE_TCL_FALSE!$ENABLE_TCL_FALSE$ac_delim BUILD_DOCS_TRUE!$BUILD_DOCS_TRUE$ac_delim BUILD_DOCS_FALSE!$BUILD_DOCS_FALSE$ac_delim OBEXFTP_VERSION!$OBEXFTP_VERSION$ac_delim MULTICOBEX_VERSION!$MULTICOBEX_VERSION$ac_delim BFB_VERSION!$BFB_VERSION$ac_delim REQUIRES!$REQUIRES$ac_delim LIBOBJS!$LIBOBJS$ac_delim LTLIBOBJS!$LTLIBOBJS$ac_delim _ACEOF if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 50; then break elif $ac_last_try; then { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} { (exit 1); exit 1; }; } else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi done ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` if test -n "$ac_eof"; then ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` ac_eof=`expr $ac_eof + 1` fi cat >>$CONFIG_STATUS <<_ACEOF cat >"\$tmp/subs-2.sed" <<\CEOF$ac_eof /@[a-zA-Z_][a-zA-Z_0-9]*@/!b end _ACEOF sed ' s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g s/^/s,@/; s/!/@,|#_!!_#|/ :n t n s/'"$ac_delim"'$/,g/; t s/$/\\/; p N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n ' >>$CONFIG_STATUS >$CONFIG_STATUS <<_ACEOF :end s/|#_!!_#|//g CEOF$ac_eof _ACEOF # VPATH may cause trouble with some makes, so we remove $(srcdir), # ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and # trailing colons and then remove the whole line if VPATH becomes empty # (actually we leave an empty line to preserve line numbers). if test "x$srcdir" = x.; then ac_vpsub='/^[ ]*VPATH[ ]*=/{ s/:*\$(srcdir):*/:/ s/:*\${srcdir}:*/:/ s/:*@srcdir@:*/:/ s/^\([^=]*=[ ]*\):*/\1/ s/:*$// s/^[^=]*=[ ]*$// }' fi cat >>$CONFIG_STATUS <<\_ACEOF fi # test -n "$CONFIG_FILES" for ac_tag in :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS do case $ac_tag in :[FHLC]) ac_mode=$ac_tag; continue;; esac case $ac_mode$ac_tag in :[FHL]*:*);; :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5 echo "$as_me: error: Invalid tag $ac_tag." >&2;} { (exit 1); exit 1; }; };; :[FH]-) ac_tag=-:-;; :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; esac ac_save_IFS=$IFS IFS=: set x $ac_tag IFS=$ac_save_IFS shift ac_file=$1 shift case $ac_mode in :L) ac_source=$1;; :[FH]) ac_file_inputs= for ac_f do case $ac_f in -) ac_f="$tmp/stdin";; *) # Look for the file first in the build tree, then in the source tree # (if the path is not absolute). The absolute path cannot be DOS-style, # because $ac_f cannot contain `:'. test -f "$ac_f" || case $ac_f in [\\/$]*) false;; *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; esac || { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 echo "$as_me: error: cannot find input file: $ac_f" >&2;} { (exit 1); exit 1; }; };; esac ac_file_inputs="$ac_file_inputs $ac_f" done # Let's still pretend it is `configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ configure_input="Generated from "`IFS=: echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure." if test x"$ac_file" != x-; then configure_input="$ac_file. $configure_input" { echo "$as_me:$LINENO: creating $ac_file" >&5 echo "$as_me: creating $ac_file" >&6;} fi case $ac_tag in *:-:* | *:-) cat >"$tmp/stdin";; esac ;; esac ac_dir=`$as_dirname -- "$ac_file" || $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_file" : 'X\(//\)[^/]' \| \ X"$ac_file" : 'X\(//\)$' \| \ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || echo X"$ac_file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` { as_dir="$ac_dir" case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 echo "$as_me: error: cannot create directory $as_dir" >&2;} { (exit 1); exit 1; }; }; } ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix case $ac_mode in :F) # # CONFIG_FILE # case $INSTALL in [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; esac _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF # If the template does not know about datarootdir, expand it. # FIXME: This hack should be removed a few years after 2.60. ac_datarootdir_hack=; ac_datarootdir_seen= case `sed -n '/datarootdir/ { p q } /@datadir@/p /@docdir@/p /@infodir@/p /@localedir@/p /@mandir@/p ' $ac_file_inputs` in *datarootdir*) ac_datarootdir_seen=yes;; *@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} _ACEOF cat >>$CONFIG_STATUS <<_ACEOF ac_datarootdir_hack=' s&@datadir@&$datadir&g s&@docdir@&$docdir&g s&@infodir@&$infodir&g s&@localedir@&$localedir&g s&@mandir@&$mandir&g s&\\\${datarootdir}&$datarootdir&g' ;; esac _ACEOF # Neutralize VPATH when `$srcdir' = `.'. # Shell code in configure.ac might set extrasub. # FIXME: do we really want to maintain this feature? cat >>$CONFIG_STATUS <<_ACEOF sed "$ac_vpsub $extrasub _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF :t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b s&@configure_input@&$configure_input&;t t s&@top_builddir@&$ac_top_builddir_sub&;t t s&@srcdir@&$ac_srcdir&;t t s&@abs_srcdir@&$ac_abs_srcdir&;t t s&@top_srcdir@&$ac_top_srcdir&;t t s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t s&@builddir@&$ac_builddir&;t t s&@abs_builddir@&$ac_abs_builddir&;t t s&@abs_top_builddir@&$ac_abs_top_builddir&;t t s&@INSTALL@&$ac_INSTALL&;t t $ac_datarootdir_hack " $ac_file_inputs | sed -f "$tmp/subs-1.sed" | sed -f "$tmp/subs-2.sed" >$tmp/out test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined." >&5 echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined." >&2;} rm -f "$tmp/stdin" case $ac_file in -) cat "$tmp/out"; rm -f "$tmp/out";; *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;; esac ;; :H) # # CONFIG_HEADER # _ACEOF # Transform confdefs.h into a sed script `conftest.defines', that # substitutes the proper values into config.h.in to produce config.h. rm -f conftest.defines conftest.tail # First, append a space to every undef/define line, to ease matching. echo 's/$/ /' >conftest.defines # Then, protect against being on the right side of a sed subst, or in # an unquoted here document, in config.status. If some macros were # called several times there might be several #defines for the same # symbol, which is useless. But do not sort them, since the last # AC_DEFINE must be honored. ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* # These sed commands are passed to sed as "A NAME B PARAMS C VALUE D", where # NAME is the cpp macro being defined, VALUE is the value it is being given. # PARAMS is the parameter list in the macro definition--in most cases, it's # just an empty string. ac_dA='s,^\\([ #]*\\)[^ ]*\\([ ]*' ac_dB='\\)[ (].*,\\1define\\2' ac_dC=' ' ac_dD=' ,' uniq confdefs.h | sed -n ' t rset :rset s/^[ ]*#[ ]*define[ ][ ]*// t ok d :ok s/[\\&,]/\\&/g s/^\('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/ '"$ac_dA"'\1'"$ac_dB"'\2'"${ac_dC}"'\3'"$ac_dD"'/p s/^\('"$ac_word_re"'\)[ ]*\(.*\)/'"$ac_dA"'\1'"$ac_dB$ac_dC"'\2'"$ac_dD"'/p ' >>conftest.defines # Remove the space that was appended to ease matching. # Then replace #undef with comments. This is necessary, for # example, in the case of _POSIX_SOURCE, which is predefined and required # on some systems where configure will not decide to define it. # (The regexp can be short, since the line contains either #define or #undef.) echo 's/ $// s,^[ #]*u.*,/* & */,' >>conftest.defines # Break up conftest.defines: ac_max_sed_lines=50 # First sed command is: sed -f defines.sed $ac_file_inputs >"$tmp/out1" # Second one is: sed -f defines.sed "$tmp/out1" >"$tmp/out2" # Third one will be: sed -f defines.sed "$tmp/out2" >"$tmp/out1" # et cetera. ac_in='$ac_file_inputs' ac_out='"$tmp/out1"' ac_nxt='"$tmp/out2"' while : do # Write a here document: cat >>$CONFIG_STATUS <<_ACEOF # First, check the format of the line: cat >"\$tmp/defines.sed" <<\\CEOF /^[ ]*#[ ]*undef[ ][ ]*$ac_word_re[ ]*\$/b def /^[ ]*#[ ]*define[ ][ ]*$ac_word_re[( ]/b def b :def _ACEOF sed ${ac_max_sed_lines}q conftest.defines >>$CONFIG_STATUS echo 'CEOF sed -f "$tmp/defines.sed"' "$ac_in >$ac_out" >>$CONFIG_STATUS ac_in=$ac_out; ac_out=$ac_nxt; ac_nxt=$ac_in sed 1,${ac_max_sed_lines}d conftest.defines >conftest.tail grep . conftest.tail >/dev/null || break rm -f conftest.defines mv conftest.tail conftest.defines done rm -f conftest.defines conftest.tail echo "ac_result=$ac_in" >>$CONFIG_STATUS cat >>$CONFIG_STATUS <<\_ACEOF if test x"$ac_file" != x-; then echo "/* $configure_input */" >"$tmp/config.h" cat "$ac_result" >>"$tmp/config.h" if diff $ac_file "$tmp/config.h" >/dev/null 2>&1; then { echo "$as_me:$LINENO: $ac_file is unchanged" >&5 echo "$as_me: $ac_file is unchanged" >&6;} else rm -f $ac_file mv "$tmp/config.h" $ac_file fi else echo "/* $configure_input */" cat "$ac_result" fi rm -f "$tmp/out12" # Compute $ac_file's index in $config_headers. _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in $ac_file | $ac_file:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done echo "timestamp for $ac_file" >`$as_dirname -- $ac_file || $as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X$ac_file : 'X\(//\)[^/]' \| \ X$ac_file : 'X\(//\)$' \| \ X$ac_file : 'X\(/\)' \| . 2>/dev/null || echo X$ac_file | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'`/stamp-h$_am_stamp_count ;; :C) { echo "$as_me:$LINENO: executing $ac_file commands" >&5 echo "$as_me: executing $ac_file commands" >&6;} ;; esac case $ac_file$ac_mode in "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. # We used to match only the files named `Makefile.in', but # some people rename them; so instead we look at the file content. # Grep'ing the first line is not enough: some people post-process # each Makefile.in and add a new line on top of each file to say so. # So let's grep whole file. if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then dirpart=`$as_dirname -- "$mf" || $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$mf" : 'X\(//\)[^/]' \| \ X"$mf" : 'X\(//\)$' \| \ X"$mf" : 'X\(/\)' \| . 2>/dev/null || echo X"$mf" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` else continue fi # Extract the definition of DEPDIR, am__include, and am__quote # from the Makefile without running `make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue am__include=`sed -n 's/^am__include = //p' < "$mf"` test -z "am__include" && continue am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n 's/^U = //p' < "$mf"` # Find all dependency output files, they are included files with # $(DEPDIR) in their names. We invoke sed twice because it is the # simplest approach to changing $(DEPDIR) to its actual value in the # expansion. for file in `sed -n " s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`$as_dirname -- "$file" || $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$file" : 'X\(//\)[^/]' \| \ X"$file" : 'X\(//\)$' \| \ X"$file" : 'X\(/\)' \| . 2>/dev/null || echo X"$file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` { as_dir=$dirpart/$fdir case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 echo "$as_me: error: cannot create directory $as_dir" >&2;} { (exit 1); exit 1; }; }; } # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done ;; esac done # for ac_tag { (exit 0); exit 0; } _ACEOF chmod +x $CONFIG_STATUS ac_clean_files=$ac_clean_files_save # configure is writing to config.log, and then calls config.status. # config.status does its own redirection, appending to config.log. # Unfortunately, on DOS this fails, as config.log is still kept open # by configure, so config.status won't be able to write to it; its # output is simply discarded. So we exec the FD to /dev/null, # effectively closing config.log, so it can be properly (re)opened and # appended to by config.status. When coming back to configure, we # need to make the FD available again. if test "$no_create" != yes; then ac_cs_success=: ac_config_status_args= test "$silent" = yes && ac_config_status_args="$ac_config_status_args --quiet" exec 5>/dev/null $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. $ac_cs_success || { (exit 1); exit 1; } fi obexftp-0.23/acinclude.m40000644000076600000240000001677511146600644012240 00000000000000AC_DEFUN([AC_PATH_WIN32], [ case $host in *-*-mingw32*) EXTRA_LIBS="$EXTRA_LIBS -lws2_32" ;; esac AC_SUBST(EXTRA_LIBS) ]) dnl dnl Option to enable or disable IrDA support dnl dnl this is stupid and won't work at all. dnl Waring: the AC_TRY_COMPILE won't work with -Werror dnl AC_DEFUN([IRDA_CHECK],[ AC_ARG_ENABLE([irda], [AC_HELP_STRING([--disable-irda], [Disables irda support @<:@default=auto@:>@])], [ac_irda_enabled=$enableval], [ac_irda_enabled=yes]) if test "$ac_irda_enabled" = yes; then AC_CACHE_CHECK([for IrDA support], am_cv_irda_found,[ AC_TRY_COMPILE([#include #include "src/irda.h"], [struct irda_device_list l;], am_cv_irda_found=yes, am_cv_irda_found=no)]) if test $am_cv_irda_found = yes; then AC_DEFINE([HAVE_IRDA], [1], [Define if system supports IrDA and it's enabled]) fi fi ]) dnl dnl Option to enable or disable Bluetooth support dnl Waring: the AC_TRY_COMPILE won't work with -Werror dnl AC_DEFUN([AC_PATH_WINBT], [ AC_CACHE_VAL(winbt_found,[ AC_CHECK_HEADERS(ws2bth.h, winbt_found=yes, winbt_found=no, [ #include ]) ]) AC_MSG_CHECKING([for Windows Bluetooth support]) AC_MSG_RESULT([$winbt_found]) ]) AC_DEFUN([AC_PATH_NETBSDBT], [ AC_CACHE_CHECK([for NetBSD Bluetooth support], netbsdbt_found, [ AC_TRY_COMPILE([ #include ], [ struct sockaddr_bt *bt; ], netbsdbt_found=yes, netbsdbt_found=no) ]) ]) AC_DEFUN([AC_PATH_FREEBSDBT], [ AC_CACHE_CHECK([for FreeBSD Bluetooth support], freebsdbt_found, [ AC_TRY_COMPILE([ #include ], [ struct sockaddr_rfcomm *rfcomm; ], freebsdbt_found=yes, freebsdbt_found=no) ]) if test "${freebsdbt_found}" = "yes"; then BLUETOOTH_LIBS=-lbluetooth fi ]) AC_DEFUN([AC_PATH_BLUEZ], [ PKG_CHECK_MODULES(BLUETOOTH, bluez, bluez_found=yes, AC_MSG_RESULT(no)) ]) AC_DEFUN([AC_PATH_BLUETOOTH], [ case $host in *-*-linux*) AC_PATH_BLUEZ ;; *-*-freebsd*) AC_PATH_FREEBSDBT ;; *-*-netbsd*) AC_PATH_NETBSDBT ;; *-*-mingw32*) AC_PATH_WINBT ;; esac AC_SUBST(BLUETOOTH_CFLAGS) AC_SUBST(BLUETOOTH_LIBS) ]) AC_DEFUN([BLUETOOTH_CHECK],[ AC_ARG_ENABLE([bluetooth], [AC_HELP_STRING([--disable-bluetooth], [Disables bluetooth support @<:@default=auto@:>@])], [ac_bluetooth_enabled=$enableval], [ac_bluetooth_enabled=yes]) if test "$ac_bluetooth_enabled" = yes; then AC_PATH_BLUETOOTH if test "${netbsdbt_found}" = "yes" -o "${freebsdbt_found}" = "yes" -o "${bluez_found}" = "yes" -o "${winbt_found}" = "yes"; then AC_DEFINE([HAVE_BLUETOOTH], [1], [Define if system supports Bluetooth and it's enabled]) fi fi ]) dnl dnl Check for Bluetooth SDP library dnl Waring: the AC_TRY_COMPILE won't work with -Werror dnl AC_DEFUN([SDPLIB_CHECK],[ AC_MSG_CHECKING(for Bluetooth SDP support) AC_TRY_COMPILE( [ #include ],[ sdp_list_t sdplist; ], am_cv_sdplib_found=yes, am_cv_sdplib_found=no ) if test $am_cv_sdplib_found = yes; then AC_DEFINE(HAVE_SDPLIB,1,[Define if system supports Bluetooth SDP]) fi AC_MSG_RESULT($am_cv_sdplib_found) ]) dnl dnl Check for USB library dnl Waring: the AC_TRY_COMPILE won't work with -Werror dnl AC_DEFUN([USB_CHECK],[ AC_MSG_CHECKING(for USB support) AC_TRY_COMPILE( [ #include #include ],[ obex_usb_intf_t usb_intf; ], am_cv_usb_found=yes, am_cv_usb_found=no ) if test $am_cv_usb_found = yes; then AC_DEFINE(HAVE_USB,1,[Define if system supports USB]) fi AC_MSG_RESULT($am_cv_usb_found) ]) dnl dnl From autoconf-archive, should be in macros dir dnl AC_DEFUN([AC_PROG_SWIG],[ AC_PATH_PROG([SWIG],[swig]) if test -z "$SWIG" ; then AC_MSG_WARN([cannot find 'swig' program. You should look at http://www.swig.org]) SWIG='echo "Error: SWIG is not installed. You should look at http://www.swig.org" ; false' elif test -n "$1" ; then AC_MSG_CHECKING([for SWIG version]) [swig_version=`$SWIG -version 2>&1 | grep 'SWIG Version' | sed 's/.*\([0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\).*/\1/g'`] AC_MSG_RESULT([$swig_version]) if test -n "$swig_version" ; then # Calculate the required version number components [required=$1] [required_major=`echo $required | sed 's/[^0-9].*//'`] if test -z "$required_major" ; then [required_major=0] fi [required=`echo $required | sed 's/[0-9]*[^0-9]//'`] [required_minor=`echo $required | sed 's/[^0-9].*//'`] if test -z "$required_minor" ; then [required_minor=0] fi [required=`echo $required | sed 's/[0-9]*[^0-9]//'`] [required_patch=`echo $required | sed 's/[^0-9].*//'`] if test -z "$required_patch" ; then [required_patch=0] fi # Calculate the available version number components [available=$swig_version] [available_major=`echo $available | sed 's/[^0-9].*//'`] if test -z "$available_major" ; then [available_major=0] fi [available=`echo $available | sed 's/[0-9]*[^0-9]//'`] [available_minor=`echo $available | sed 's/[^0-9].*//'`] if test -z "$available_minor" ; then [available_minor=0] fi [available=`echo $available | sed 's/[0-9]*[^0-9]//'`] [available_patch=`echo $available | sed 's/[^0-9].*//'`] if test -z "$available_patch" ; then [available_patch=0] fi if test $available_major -ne $required_major \ -o $available_minor -ne $required_minor \ -o $available_patch -lt $required_patch ; then AC_MSG_WARN([SWIG version >= $1 is required. You have $swig_version. You should look at http://www.swig.org]) SWIG='echo "Error: SWIG version >= $1 is required. You have '"$swig_version"'. You should look at http://www.swig.org" ; false' else AC_MSG_NOTICE([SWIG executable is '$SWIG']) SWIG_LIB=`$SWIG -swiglib` AC_MSG_NOTICE([SWIG library directory is '$SWIG_LIB']) fi else AC_MSG_WARN([cannot determine SWIG version]) SWIG='echo "Error: Cannot determine SWIG version. You should look at http://www.swig.org" ; false' fi fi AC_SUBST([SWIG_LIB]) ]) # SWIG_ENABLE_CXX() # # Enable SWIG C++ support. This affects all invocations of $(SWIG). AC_DEFUN([SWIG_ENABLE_CXX],[ AC_REQUIRE([AC_PROG_SWIG]) AC_REQUIRE([AC_PROG_CXX]) SWIG="$SWIG -c++" ]) obexftp-0.23/m4/0000777000076600000240000000000011146603262010432 500000000000000obexftp-0.23/m4/lib-ld.m40000644000076600000240000000653111146600644011761 00000000000000# lib-ld.m4 serial 3 (gettext-0.13) dnl Copyright (C) 1996-2003 Free Software Foundation, Inc. dnl This file is free software; the Free Software Foundation dnl gives unlimited permission to copy and/or distribute it, dnl with or without modifications, as long as this notice is preserved. dnl Subroutines of libtool.m4, dnl with replacements s/AC_/AC_LIB/ and s/lt_cv/acl_cv/ to avoid collision dnl with libtool.m4. dnl From libtool-1.4. Sets the variable with_gnu_ld to yes or no. AC_DEFUN([AC_LIB_PROG_LD_GNU], [AC_CACHE_CHECK([if the linker ($LD) is GNU ld], acl_cv_prog_gnu_ld, [# I'd rather use --version here, but apparently some GNU ld's only accept -v. case `$LD -v 2>&1 conf$$.sh echo "exit 0" >>conf$$.sh chmod +x conf$$.sh if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi rm -f conf$$.sh fi ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. AC_MSG_CHECKING([for ld used by GCC]) case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [[\\/]* | [A-Za-z]:[\\/]*)] [re_direlt='/[^/][^/]*/\.\./'] # Canonicalize the path of ld ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then AC_MSG_CHECKING([for GNU ld]) else AC_MSG_CHECKING([for non-GNU ld]) fi AC_CACHE_VAL(acl_cv_path_LD, [if test -z "$LD"; then IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then acl_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some GNU ld's only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$acl_cv_path_LD" -v 2>&1 < /dev/null` in *GNU* | *'with BFD'*) test "$with_gnu_ld" != no && break ;; *) test "$with_gnu_ld" != yes && break ;; esac fi done IFS="$ac_save_ifs" else acl_cv_path_LD="$LD" # Let the user override the test with a path. fi]) LD="$acl_cv_path_LD" if test -n "$LD"; then AC_MSG_RESULT($LD) else AC_MSG_RESULT(no) fi test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) AC_LIB_PROG_LD_GNU ]) obexftp-0.23/m4/iconv.m40000644000076600000240000000642611146600644011737 00000000000000# iconv.m4 serial AM4 (gettext-0.11.3) dnl Copyright (C) 2000-2002 Free Software Foundation, Inc. dnl This file is free software; the Free Software Foundation dnl gives unlimited permission to copy and/or distribute it, dnl with or without modifications, as long as this notice is preserved. dnl From Bruno Haible. AC_DEFUN([AM_ICONV_LINKFLAGS_BODY], [ dnl Prerequisites of AC_LIB_LINKFLAGS_BODY. AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) AC_REQUIRE([AC_LIB_RPATH]) dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV dnl accordingly. AC_LIB_LINKFLAGS_BODY([iconv]) ]) AC_DEFUN([AM_ICONV_LINK], [ dnl Some systems have iconv in libc, some have it in libiconv (OSF/1 and dnl those with the standalone portable GNU libiconv installed). dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV dnl accordingly. AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY]) dnl Add $INCICONV to CPPFLAGS before performing the following checks, dnl because if the user has installed libiconv and not disabled its use dnl via --without-libiconv-prefix, he wants to use it. The first dnl AC_TRY_LINK will then fail, the second AC_TRY_LINK will succeed. am_save_CPPFLAGS="$CPPFLAGS" AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCICONV]) AC_CACHE_CHECK(for iconv, am_cv_func_iconv, [ am_cv_func_iconv="no, consider installing GNU libiconv" am_cv_lib_iconv=no AC_TRY_LINK([#include #include ], [iconv_t cd = iconv_open("",""); iconv(cd,NULL,NULL,NULL,NULL); iconv_close(cd);], am_cv_func_iconv=yes) if test "$am_cv_func_iconv" != yes; then am_save_LIBS="$LIBS" LIBS="$LIBS $LIBICONV" AC_TRY_LINK([#include #include ], [iconv_t cd = iconv_open("",""); iconv(cd,NULL,NULL,NULL,NULL); iconv_close(cd);], am_cv_lib_iconv=yes am_cv_func_iconv=yes) LIBS="$am_save_LIBS" fi ]) if test "$am_cv_func_iconv" = yes; then AC_DEFINE(HAVE_ICONV, 1, [Define if you have the iconv() function.]) fi if test "$am_cv_lib_iconv" = yes; then AC_MSG_CHECKING([how to link with libiconv]) AC_MSG_RESULT([$LIBICONV]) else dnl If $LIBICONV didn't lead to a usable library, we don't need $INCICONV dnl either. CPPFLAGS="$am_save_CPPFLAGS" LIBICONV= LTLIBICONV= fi AC_SUBST(LIBICONV) AC_SUBST(LTLIBICONV) ]) AC_DEFUN([AM_ICONV], [ AM_ICONV_LINK if test "$am_cv_func_iconv" = yes; then AC_MSG_CHECKING([for iconv declaration]) AC_CACHE_VAL(am_cv_proto_iconv, [ AC_TRY_COMPILE([ #include #include extern #ifdef __cplusplus "C" #endif #if defined(__STDC__) || defined(__cplusplus) size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft); #else size_t iconv(); #endif ], [], am_cv_proto_iconv_arg1="", am_cv_proto_iconv_arg1="const") am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);"]) am_cv_proto_iconv=`echo "[$]am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'` AC_MSG_RESULT([$]{ac_t:- }[$]am_cv_proto_iconv) AC_DEFINE_UNQUOTED(ICONV_CONST, $am_cv_proto_iconv_arg1, [Define as const if the declaration of iconv() needs const.]) fi ]) obexftp-0.23/m4/lib-link.m40000644000076600000240000006424411146600644012324 00000000000000# lib-link.m4 serial 9 (gettext-0.16) dnl Copyright (C) 2001-2006 Free Software Foundation, Inc. dnl This file is free software; the Free Software Foundation dnl gives unlimited permission to copy and/or distribute it, dnl with or without modifications, as long as this notice is preserved. dnl From Bruno Haible. AC_PREREQ(2.50) dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and dnl the libraries corresponding to explicit and implicit dependencies. dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and dnl augments the CPPFLAGS variable. AC_DEFUN([AC_LIB_LINKFLAGS], [ AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) AC_REQUIRE([AC_LIB_RPATH]) define([Name],[translit([$1],[./-], [___])]) define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [ AC_LIB_LINKFLAGS_BODY([$1], [$2]) ac_cv_lib[]Name[]_libs="$LIB[]NAME" ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME" ac_cv_lib[]Name[]_cppflags="$INC[]NAME" ]) LIB[]NAME="$ac_cv_lib[]Name[]_libs" LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs" INC[]NAME="$ac_cv_lib[]Name[]_cppflags" AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME) AC_SUBST([LIB]NAME) AC_SUBST([LTLIB]NAME) dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the dnl results of this search when this library appears as a dependency. HAVE_LIB[]NAME=yes undefine([Name]) undefine([NAME]) ]) dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode) dnl searches for libname and the libraries corresponding to explicit and dnl implicit dependencies, together with the specified include files and dnl the ability to compile and link the specified testcode. If found, it dnl sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME} and dnl LTLIB${NAME} variables and augments the CPPFLAGS variable, and dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty. AC_DEFUN([AC_LIB_HAVE_LINKFLAGS], [ AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) AC_REQUIRE([AC_LIB_RPATH]) define([Name],[translit([$1],[./-], [___])]) define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME dnl accordingly. AC_LIB_LINKFLAGS_BODY([$1], [$2]) dnl Add $INC[]NAME to CPPFLAGS before performing the following checks, dnl because if the user has installed lib[]Name and not disabled its use dnl via --without-lib[]Name-prefix, he wants to use it. ac_save_CPPFLAGS="$CPPFLAGS" AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME) AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [ ac_save_LIBS="$LIBS" LIBS="$LIBS $LIB[]NAME" AC_TRY_LINK([$3], [$4], [ac_cv_lib[]Name=yes], [ac_cv_lib[]Name=no]) LIBS="$ac_save_LIBS" ]) if test "$ac_cv_lib[]Name" = yes; then HAVE_LIB[]NAME=yes AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the $1 library.]) AC_MSG_CHECKING([how to link with lib[]$1]) AC_MSG_RESULT([$LIB[]NAME]) else HAVE_LIB[]NAME=no dnl If $LIB[]NAME didn't lead to a usable library, we don't need dnl $INC[]NAME either. CPPFLAGS="$ac_save_CPPFLAGS" LIB[]NAME= LTLIB[]NAME= fi AC_SUBST([HAVE_LIB]NAME) AC_SUBST([LIB]NAME) AC_SUBST([LTLIB]NAME) undefine([Name]) undefine([NAME]) ]) dnl Determine the platform dependent parameters needed to use rpath: dnl libext, shlibext, hardcode_libdir_flag_spec, hardcode_libdir_separator, dnl hardcode_direct, hardcode_minus_L. AC_DEFUN([AC_LIB_RPATH], [ dnl Tell automake >= 1.10 to complain if config.rpath is missing. m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([config.rpath])]) AC_REQUIRE([AC_PROG_CC]) dnl we use $CC, $GCC, $LDFLAGS AC_REQUIRE([AC_LIB_PROG_LD]) dnl we use $LD, $with_gnu_ld AC_REQUIRE([AC_CANONICAL_HOST]) dnl we use $host AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir AC_CACHE_CHECK([for shared library run path origin], acl_cv_rpath, [ CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \ ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh . ./conftest.sh rm -f ./conftest.sh acl_cv_rpath=done ]) wl="$acl_cv_wl" libext="$acl_cv_libext" shlibext="$acl_cv_shlibext" hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec" hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator" hardcode_direct="$acl_cv_hardcode_direct" hardcode_minus_L="$acl_cv_hardcode_minus_L" dnl Determine whether the user wants rpath handling at all. AC_ARG_ENABLE(rpath, [ --disable-rpath do not hardcode runtime library paths], :, enable_rpath=yes) ]) dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and dnl the libraries corresponding to explicit and implicit dependencies. dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables. AC_DEFUN([AC_LIB_LINKFLAGS_BODY], [ AC_REQUIRE([AC_LIB_PREPARE_MULTILIB]) define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) dnl By default, look in $includedir and $libdir. use_additional=yes AC_LIB_WITH_FINAL_PREFIX([ eval additional_includedir=\"$includedir\" eval additional_libdir=\"$libdir\" ]) AC_LIB_ARG_WITH([lib$1-prefix], [ --with-lib$1-prefix[=DIR] search for lib$1 in DIR/include and DIR/lib --without-lib$1-prefix don't search for lib$1 in includedir and libdir], [ if test "X$withval" = "Xno"; then use_additional=no else if test "X$withval" = "X"; then AC_LIB_WITH_FINAL_PREFIX([ eval additional_includedir=\"$includedir\" eval additional_libdir=\"$libdir\" ]) else additional_includedir="$withval/include" additional_libdir="$withval/$acl_libdirstem" fi fi ]) dnl Search the library and its dependencies in $additional_libdir and dnl $LDFLAGS. Using breadth-first-seach. LIB[]NAME= LTLIB[]NAME= INC[]NAME= rpathdirs= ltrpathdirs= names_already_handled= names_next_round='$1 $2' while test -n "$names_next_round"; do names_this_round="$names_next_round" names_next_round= for name in $names_this_round; do already_handled= for n in $names_already_handled; do if test "$n" = "$name"; then already_handled=yes break fi done if test -z "$already_handled"; then names_already_handled="$names_already_handled $name" dnl See if it was already located by an earlier AC_LIB_LINKFLAGS dnl or AC_LIB_HAVE_LINKFLAGS call. uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'` eval value=\"\$HAVE_LIB$uppername\" if test -n "$value"; then if test "$value" = yes; then eval value=\"\$LIB$uppername\" test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value" eval value=\"\$LTLIB$uppername\" test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value" else dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined dnl that this library doesn't exist. So just drop it. : fi else dnl Search the library lib$name in $additional_libdir and $LDFLAGS dnl and the already constructed $LIBNAME/$LTLIBNAME. found_dir= found_la= found_so= found_a= if test $use_additional = yes; then if test -n "$shlibext" \ && { test -f "$additional_libdir/lib$name.$shlibext" \ || { test "$shlibext" = dll \ && test -f "$additional_libdir/lib$name.dll.a"; }; }; then found_dir="$additional_libdir" if test -f "$additional_libdir/lib$name.$shlibext"; then found_so="$additional_libdir/lib$name.$shlibext" else found_so="$additional_libdir/lib$name.dll.a" fi if test -f "$additional_libdir/lib$name.la"; then found_la="$additional_libdir/lib$name.la" fi else if test -f "$additional_libdir/lib$name.$libext"; then found_dir="$additional_libdir" found_a="$additional_libdir/lib$name.$libext" if test -f "$additional_libdir/lib$name.la"; then found_la="$additional_libdir/lib$name.la" fi fi fi fi if test "X$found_dir" = "X"; then for x in $LDFLAGS $LTLIB[]NAME; do AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) case "$x" in -L*) dir=`echo "X$x" | sed -e 's/^X-L//'` if test -n "$shlibext" \ && { test -f "$dir/lib$name.$shlibext" \ || { test "$shlibext" = dll \ && test -f "$dir/lib$name.dll.a"; }; }; then found_dir="$dir" if test -f "$dir/lib$name.$shlibext"; then found_so="$dir/lib$name.$shlibext" else found_so="$dir/lib$name.dll.a" fi if test -f "$dir/lib$name.la"; then found_la="$dir/lib$name.la" fi else if test -f "$dir/lib$name.$libext"; then found_dir="$dir" found_a="$dir/lib$name.$libext" if test -f "$dir/lib$name.la"; then found_la="$dir/lib$name.la" fi fi fi ;; esac if test "X$found_dir" != "X"; then break fi done fi if test "X$found_dir" != "X"; then dnl Found the library. LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name" if test "X$found_so" != "X"; then dnl Linking with a shared library. We attempt to hardcode its dnl directory into the executable's runpath, unless it's the dnl standard /usr/lib. if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/$acl_libdirstem"; then dnl No hardcoding is needed. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" else dnl Use an explicit option to hardcode DIR into the resulting dnl binary. dnl Potentially add DIR to ltrpathdirs. dnl The ltrpathdirs will be appended to $LTLIBNAME at the end. haveit= for x in $ltrpathdirs; do if test "X$x" = "X$found_dir"; then haveit=yes break fi done if test -z "$haveit"; then ltrpathdirs="$ltrpathdirs $found_dir" fi dnl The hardcoding into $LIBNAME is system dependent. if test "$hardcode_direct" = yes; then dnl Using DIR/libNAME.so during linking hardcodes DIR into the dnl resulting binary. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" else if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then dnl Use an explicit option to hardcode DIR into the resulting dnl binary. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" dnl Potentially add DIR to rpathdirs. dnl The rpathdirs will be appended to $LIBNAME at the end. haveit= for x in $rpathdirs; do if test "X$x" = "X$found_dir"; then haveit=yes break fi done if test -z "$haveit"; then rpathdirs="$rpathdirs $found_dir" fi else dnl Rely on "-L$found_dir". dnl But don't add it if it's already contained in the LDFLAGS dnl or the already constructed $LIBNAME haveit= for x in $LDFLAGS $LIB[]NAME; do AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) if test "X$x" = "X-L$found_dir"; then haveit=yes break fi done if test -z "$haveit"; then LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir" fi if test "$hardcode_minus_L" != no; then dnl FIXME: Not sure whether we should use dnl "-L$found_dir -l$name" or "-L$found_dir $found_so" dnl here. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" else dnl We cannot use $hardcode_runpath_var and LD_RUN_PATH dnl here, because this doesn't fit in flags passed to the dnl compiler. So give up. No hardcoding. This affects only dnl very old systems. dnl FIXME: Not sure whether we should use dnl "-L$found_dir -l$name" or "-L$found_dir $found_so" dnl here. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name" fi fi fi fi else if test "X$found_a" != "X"; then dnl Linking with a static library. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a" else dnl We shouldn't come here, but anyway it's good to have a dnl fallback. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name" fi fi dnl Assume the include files are nearby. additional_includedir= case "$found_dir" in */$acl_libdirstem | */$acl_libdirstem/) basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'` additional_includedir="$basedir/include" ;; esac if test "X$additional_includedir" != "X"; then dnl Potentially add $additional_includedir to $INCNAME. dnl But don't add it dnl 1. if it's the standard /usr/include, dnl 2. if it's /usr/local/include and we are using GCC on Linux, dnl 3. if it's already present in $CPPFLAGS or the already dnl constructed $INCNAME, dnl 4. if it doesn't exist as a directory. if test "X$additional_includedir" != "X/usr/include"; then haveit= if test "X$additional_includedir" = "X/usr/local/include"; then if test -n "$GCC"; then case $host_os in linux* | gnu* | k*bsd*-gnu) haveit=yes;; esac fi fi if test -z "$haveit"; then for x in $CPPFLAGS $INC[]NAME; do AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) if test "X$x" = "X-I$additional_includedir"; then haveit=yes break fi done if test -z "$haveit"; then if test -d "$additional_includedir"; then dnl Really add $additional_includedir to $INCNAME. INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir" fi fi fi fi fi dnl Look for dependencies. if test -n "$found_la"; then dnl Read the .la file. It defines the variables dnl dlname, library_names, old_library, dependency_libs, current, dnl age, revision, installed, dlopen, dlpreopen, libdir. save_libdir="$libdir" case "$found_la" in */* | *\\*) . "$found_la" ;; *) . "./$found_la" ;; esac libdir="$save_libdir" dnl We use only dependency_libs. for dep in $dependency_libs; do case "$dep" in -L*) additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'` dnl Potentially add $additional_libdir to $LIBNAME and $LTLIBNAME. dnl But don't add it dnl 1. if it's the standard /usr/lib, dnl 2. if it's /usr/local/lib and we are using GCC on Linux, dnl 3. if it's already present in $LDFLAGS or the already dnl constructed $LIBNAME, dnl 4. if it doesn't exist as a directory. if test "X$additional_libdir" != "X/usr/$acl_libdirstem"; then haveit= if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem"; then if test -n "$GCC"; then case $host_os in linux* | gnu* | k*bsd*-gnu) haveit=yes;; esac fi fi if test -z "$haveit"; then haveit= for x in $LDFLAGS $LIB[]NAME; do AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) if test "X$x" = "X-L$additional_libdir"; then haveit=yes break fi done if test -z "$haveit"; then if test -d "$additional_libdir"; then dnl Really add $additional_libdir to $LIBNAME. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$additional_libdir" fi fi haveit= for x in $LDFLAGS $LTLIB[]NAME; do AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) if test "X$x" = "X-L$additional_libdir"; then haveit=yes break fi done if test -z "$haveit"; then if test -d "$additional_libdir"; then dnl Really add $additional_libdir to $LTLIBNAME. LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$additional_libdir" fi fi fi fi ;; -R*) dir=`echo "X$dep" | sed -e 's/^X-R//'` if test "$enable_rpath" != no; then dnl Potentially add DIR to rpathdirs. dnl The rpathdirs will be appended to $LIBNAME at the end. haveit= for x in $rpathdirs; do if test "X$x" = "X$dir"; then haveit=yes break fi done if test -z "$haveit"; then rpathdirs="$rpathdirs $dir" fi dnl Potentially add DIR to ltrpathdirs. dnl The ltrpathdirs will be appended to $LTLIBNAME at the end. haveit= for x in $ltrpathdirs; do if test "X$x" = "X$dir"; then haveit=yes break fi done if test -z "$haveit"; then ltrpathdirs="$ltrpathdirs $dir" fi fi ;; -l*) dnl Handle this in the next round. names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` ;; *.la) dnl Handle this in the next round. Throw away the .la's dnl directory; it is already contained in a preceding -L dnl option. names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` ;; *) dnl Most likely an immediate library name. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep" LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep" ;; esac done fi else dnl Didn't find the library; assume it is in the system directories dnl known to the linker and runtime loader. (All the system dnl directories known to the linker should also be known to the dnl runtime loader, otherwise the system is severely misconfigured.) LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name" LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name" fi fi fi done done if test "X$rpathdirs" != "X"; then if test -n "$hardcode_libdir_separator"; then dnl Weird platform: only the last -rpath option counts, the user must dnl pass all path elements in one option. We can arrange that for a dnl single library, but not when more than one $LIBNAMEs are used. alldirs= for found_dir in $rpathdirs; do alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir" done dnl Note: hardcode_libdir_flag_spec uses $libdir and $wl. acl_save_libdir="$libdir" libdir="$alldirs" eval flag=\"$hardcode_libdir_flag_spec\" libdir="$acl_save_libdir" LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" else dnl The -rpath options are cumulative. for found_dir in $rpathdirs; do acl_save_libdir="$libdir" libdir="$found_dir" eval flag=\"$hardcode_libdir_flag_spec\" libdir="$acl_save_libdir" LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" done fi fi if test "X$ltrpathdirs" != "X"; then dnl When using libtool, the option that works for both libraries and dnl executables is -R. The -R options are cumulative. for found_dir in $ltrpathdirs; do LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir" done fi ]) dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR, dnl unless already present in VAR. dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes dnl contains two or three consecutive elements that belong together. AC_DEFUN([AC_LIB_APPENDTOVAR], [ for element in [$2]; do haveit= for x in $[$1]; do AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) if test "X$x" = "X$element"; then haveit=yes break fi done if test -z "$haveit"; then [$1]="${[$1]}${[$1]:+ }$element" fi done ]) dnl For those cases where a variable contains several -L and -l options dnl referring to unknown libraries and directories, this macro determines the dnl necessary additional linker options for the runtime path. dnl AC_LIB_LINKFLAGS_FROM_LIBS([LDADDVAR], [LIBSVALUE], [USE-LIBTOOL]) dnl sets LDADDVAR to linker options needed together with LIBSVALUE. dnl If USE-LIBTOOL evaluates to non-empty, linking with libtool is assumed, dnl otherwise linking without libtool is assumed. AC_DEFUN([AC_LIB_LINKFLAGS_FROM_LIBS], [ AC_REQUIRE([AC_LIB_RPATH]) AC_REQUIRE([AC_LIB_PREPARE_MULTILIB]) $1= if test "$enable_rpath" != no; then if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then dnl Use an explicit option to hardcode directories into the resulting dnl binary. rpathdirs= next= for opt in $2; do if test -n "$next"; then dir="$next" dnl No need to hardcode the standard /usr/lib. if test "X$dir" != "X/usr/$acl_libdirstem"; then rpathdirs="$rpathdirs $dir" fi next= else case $opt in -L) next=yes ;; -L*) dir=`echo "X$opt" | sed -e 's,^X-L,,'` dnl No need to hardcode the standard /usr/lib. if test "X$dir" != "X/usr/$acl_libdirstem"; then rpathdirs="$rpathdirs $dir" fi next= ;; *) next= ;; esac fi done if test "X$rpathdirs" != "X"; then if test -n ""$3""; then dnl libtool is used for linking. Use -R options. for dir in $rpathdirs; do $1="${$1}${$1:+ }-R$dir" done else dnl The linker is used for linking directly. if test -n "$hardcode_libdir_separator"; then dnl Weird platform: only the last -rpath option counts, the user dnl must pass all path elements in one option. alldirs= for dir in $rpathdirs; do alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$dir" done acl_save_libdir="$libdir" libdir="$alldirs" eval flag=\"$hardcode_libdir_flag_spec\" libdir="$acl_save_libdir" $1="$flag" else dnl The -rpath options are cumulative. for dir in $rpathdirs; do acl_save_libdir="$libdir" libdir="$dir" eval flag=\"$hardcode_libdir_flag_spec\" libdir="$acl_save_libdir" $1="${$1}${$1:+ }$flag" done fi fi fi fi fi AC_SUBST([$1]) ]) obexftp-0.23/m4/lib-prefix.m40000644000076600000240000001503611146600644012657 00000000000000# lib-prefix.m4 serial 5 (gettext-0.15) dnl Copyright (C) 2001-2005 Free Software Foundation, Inc. dnl This file is free software; the Free Software Foundation dnl gives unlimited permission to copy and/or distribute it, dnl with or without modifications, as long as this notice is preserved. dnl From Bruno Haible. dnl AC_LIB_ARG_WITH is synonymous to AC_ARG_WITH in autoconf-2.13, and dnl similar to AC_ARG_WITH in autoconf 2.52...2.57 except that is doesn't dnl require excessive bracketing. ifdef([AC_HELP_STRING], [AC_DEFUN([AC_LIB_ARG_WITH], [AC_ARG_WITH([$1],[[$2]],[$3],[$4])])], [AC_DEFUN([AC_][LIB_ARG_WITH], [AC_ARG_WITH([$1],[$2],[$3],[$4])])]) dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed dnl to access previously installed libraries. The basic assumption is that dnl a user will want packages to use other packages he previously installed dnl with the same --prefix option. dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate dnl libraries, but is otherwise very convenient. AC_DEFUN([AC_LIB_PREFIX], [ AC_BEFORE([$0], [AC_LIB_LINKFLAGS]) AC_REQUIRE([AC_PROG_CC]) AC_REQUIRE([AC_CANONICAL_HOST]) AC_REQUIRE([AC_LIB_PREPARE_MULTILIB]) AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) dnl By default, look in $includedir and $libdir. use_additional=yes AC_LIB_WITH_FINAL_PREFIX([ eval additional_includedir=\"$includedir\" eval additional_libdir=\"$libdir\" ]) AC_LIB_ARG_WITH([lib-prefix], [ --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib --without-lib-prefix don't search for libraries in includedir and libdir], [ if test "X$withval" = "Xno"; then use_additional=no else if test "X$withval" = "X"; then AC_LIB_WITH_FINAL_PREFIX([ eval additional_includedir=\"$includedir\" eval additional_libdir=\"$libdir\" ]) else additional_includedir="$withval/include" additional_libdir="$withval/$acl_libdirstem" fi fi ]) if test $use_additional = yes; then dnl Potentially add $additional_includedir to $CPPFLAGS. dnl But don't add it dnl 1. if it's the standard /usr/include, dnl 2. if it's already present in $CPPFLAGS, dnl 3. if it's /usr/local/include and we are using GCC on Linux, dnl 4. if it doesn't exist as a directory. if test "X$additional_includedir" != "X/usr/include"; then haveit= for x in $CPPFLAGS; do AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) if test "X$x" = "X-I$additional_includedir"; then haveit=yes break fi done if test -z "$haveit"; then if test "X$additional_includedir" = "X/usr/local/include"; then if test -n "$GCC"; then case $host_os in linux* | gnu* | k*bsd*-gnu) haveit=yes;; esac fi fi if test -z "$haveit"; then if test -d "$additional_includedir"; then dnl Really add $additional_includedir to $CPPFLAGS. CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir" fi fi fi fi dnl Potentially add $additional_libdir to $LDFLAGS. dnl But don't add it dnl 1. if it's the standard /usr/lib, dnl 2. if it's already present in $LDFLAGS, dnl 3. if it's /usr/local/lib and we are using GCC on Linux, dnl 4. if it doesn't exist as a directory. if test "X$additional_libdir" != "X/usr/$acl_libdirstem"; then haveit= for x in $LDFLAGS; do AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) if test "X$x" = "X-L$additional_libdir"; then haveit=yes break fi done if test -z "$haveit"; then if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem"; then if test -n "$GCC"; then case $host_os in linux*) haveit=yes;; esac fi fi if test -z "$haveit"; then if test -d "$additional_libdir"; then dnl Really add $additional_libdir to $LDFLAGS. LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir" fi fi fi fi fi ]) dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix, dnl acl_final_exec_prefix, containing the values to which $prefix and dnl $exec_prefix will expand at the end of the configure script. AC_DEFUN([AC_LIB_PREPARE_PREFIX], [ dnl Unfortunately, prefix and exec_prefix get only finally determined dnl at the end of configure. if test "X$prefix" = "XNONE"; then acl_final_prefix="$ac_default_prefix" else acl_final_prefix="$prefix" fi if test "X$exec_prefix" = "XNONE"; then acl_final_exec_prefix='${prefix}' else acl_final_exec_prefix="$exec_prefix" fi acl_save_prefix="$prefix" prefix="$acl_final_prefix" eval acl_final_exec_prefix=\"$acl_final_exec_prefix\" prefix="$acl_save_prefix" ]) dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the dnl variables prefix and exec_prefix bound to the values they will have dnl at the end of the configure script. AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX], [ acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" $1 exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" ]) dnl AC_LIB_PREPARE_MULTILIB creates a variable acl_libdirstem, containing dnl the basename of the libdir, either "lib" or "lib64". AC_DEFUN([AC_LIB_PREPARE_MULTILIB], [ dnl There is no formal standard regarding lib and lib64. The current dnl practice is that on a system supporting 32-bit and 64-bit instruction dnl sets or ABIs, 64-bit libraries go under $prefix/lib64 and 32-bit dnl libraries go under $prefix/lib. We determine the compiler's default dnl mode by looking at the compiler's library search path. If at least dnl of its elements ends in /lib64 or points to a directory whose absolute dnl pathname ends in /lib64, we assume a 64-bit ABI. Otherwise we use the dnl default, namely "lib". acl_libdirstem=lib searchpath=`(LC_ALL=C $CC -print-search-dirs) 2>/dev/null | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'` if test -n "$searchpath"; then acl_save_IFS="${IFS= }"; IFS=":" for searchdir in $searchpath; do if test -d "$searchdir"; then case "$searchdir" in */lib64/ | */lib64 ) acl_libdirstem=lib64 ;; *) searchdir=`cd "$searchdir" && pwd` case "$searchdir" in */lib64 ) acl_libdirstem=lib64 ;; esac ;; esac fi done IFS="$acl_save_IFS" fi ]) obexftp-0.23/config.h.in0000644000076600000240000000644111146600664012061 00000000000000/* config.h.in. Generated from configure.in by autoheader. */ /* Define to 1 if you have the header file. */ #undef HAVE_ARPA_INET_H /* Define if system supports Bluetooth and it's enabled */ #undef HAVE_BLUETOOTH /* Define to 1 if you have the header file, and it defines `DIR'. */ #undef HAVE_DIRENT_H /* Define to 1 if you have the header file. */ #undef HAVE_DLFCN_H /* Define to 1 if you have the header file. */ #undef HAVE_ERRNO_H /* Define to 1 if you have the header file. */ #undef HAVE_FCNTL_H /* Define if you have the iconv() function. */ #undef HAVE_ICONV /* Define to 1 if you have the header file. */ #undef HAVE_INTTYPES_H /* Define to 1 if you have the header file. */ #undef HAVE_LANGINFO_H /* Define to 1 if you have the header file. */ #undef HAVE_MEMORY_H /* Define to 1 if you have the header file, and it defines `DIR'. */ #undef HAVE_NDIR_H /* Define to 1 if you have the header file. */ #undef HAVE_NETDB_H /* Define to 1 if you have the header file. */ #undef HAVE_NETINET_IN_H /* Define if system supports Bluetooth SDP */ #undef HAVE_SDPLIB /* Define to 1 if you have the header file. */ #undef HAVE_STDINT_H /* Define to 1 if you have the header file. */ #undef HAVE_STDLIB_H /* Define to 1 if you have the header file. */ #undef HAVE_STRINGS_H /* Define to 1 if you have the header file. */ #undef HAVE_STRING_H /* Define to 1 if you have the header file, and it defines `DIR'. */ #undef HAVE_SYS_DIR_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_IOCTL_H /* Define to 1 if you have the header file, and it defines `DIR'. */ #undef HAVE_SYS_NDIR_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_SELECT_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_SOCKET_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_STAT_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_TIMES_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_TIME_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_TYPES_H /* Define to 1 if you have the header file. */ #undef HAVE_TERMIOS_H /* Define to 1 if you have the header file. */ #undef HAVE_UNISTD_H /* Define if system supports USB */ #undef HAVE_USB /* Define to 1 if you have the header file. */ #undef HAVE_WS2BTH_H /* Define as const if the declaration of iconv() needs const. */ #undef ICONV_CONST /* Name of package */ #undef PACKAGE /* Define to the address where bug reports for this package should be sent. */ #undef PACKAGE_BUGREPORT /* Define to the full name of this package. */ #undef PACKAGE_NAME /* Define to the full name and version of this package. */ #undef PACKAGE_STRING /* Define to the one symbol short name of this package. */ #undef PACKAGE_TARNAME /* Define to the version of this package. */ #undef PACKAGE_VERSION /* Define to 1 if you have the ANSI C header files. */ #undef STDC_HEADERS /* Version number of package */ #undef VERSION /* non-C99 fake support for __func__ */ #undef __func__ obexftp-0.23/obexftp.spec0000644000076600000240000000242311146600703012347 00000000000000# # spec file for package ObexFTP (Version 0.15) # # Author: Christian W. Zuckschwerdt , Dec 2001 - Sep 2004 # Summary: Access devices via ObexFTP e.g. mobile phones Name: obexftp Version: 0.23 Release: 1 Copyright: GPL Group: Utilities/Console Autoreqprov: on Source: http://triq.net/obexftp/%{name}-%{version}.tar.gz URL: http://triq.net/obex/ BuildRoot: %{_tmppath}/%{name}-%{version}-root Packager: Christian W. Zuckschwerdt %description This package contains some command line tools and the ObexFTP library. Using OpenOBEX it enables you to transfer data via IrDA, BlueTooth as well as some custom (Siemens, Ericsson) serial port protocols. Authors: -------- Christian W. Zuckschwerdt %prep %setup %configure %build make %install rm -rf $RPM_BUILD_ROOT %makeinstall ln -s obexftp $RPM_BUILD_ROOT%{_bindir}/obexls ln -s obexftp $RPM_BUILD_ROOT%{_bindir}/obexget ln -s obexftp $RPM_BUILD_ROOT%{_bindir}/obexput ln -s obexftp $RPM_BUILD_ROOT%{_bindir}/obexrm %clean rm -rf $RPM_BUILD_ROOT %files %defattr(-, root, root) %doc AUTHORS COPYING ChangeLog NEWS %doc README README.bfb README.obexftp README.openobex %{_bindir}/* %{_libdir}/* %{_mandir}/man?/* %{_includedir}/*/* obexftp-0.23/aclocal.m40000644000076600000240000104672611146600661011706 00000000000000# generated automatically by aclocal 1.9.6 -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, # 2005 Free Software Foundation, Inc. # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- # serial 52 Debian 1.5.26-1ubuntu1 AC_PROG_LIBTOOL # AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED) # ----------------------------------------------------------- # If this macro is not defined by Autoconf, define it here. m4_ifdef([AC_PROVIDE_IFELSE], [], [m4_define([AC_PROVIDE_IFELSE], [m4_ifdef([AC_PROVIDE_$1], [$2], [$3])])]) # AC_PROG_LIBTOOL # --------------- AC_DEFUN([AC_PROG_LIBTOOL], [AC_REQUIRE([_AC_PROG_LIBTOOL])dnl dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX. AC_PROVIDE_IFELSE([AC_PROG_CXX], [AC_LIBTOOL_CXX], [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX ])]) dnl And a similar setup for Fortran 77 support AC_PROVIDE_IFELSE([AC_PROG_F77], [AC_LIBTOOL_F77], [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77 ])]) dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly. dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both. AC_PROVIDE_IFELSE([AC_PROG_GCJ], [AC_LIBTOOL_GCJ], [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], [AC_LIBTOOL_GCJ], [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ], [AC_LIBTOOL_GCJ], [ifdef([AC_PROG_GCJ], [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])]) ifdef([A][M_PROG_GCJ], [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])]) ifdef([LT_AC_PROG_GCJ], [define([LT_AC_PROG_GCJ], defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])]) ])])# AC_PROG_LIBTOOL # _AC_PROG_LIBTOOL # ---------------- AC_DEFUN([_AC_PROG_LIBTOOL], [AC_REQUIRE([AC_LIBTOOL_SETUP])dnl AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl # This can be used to rebuild libtool when needed LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' AC_SUBST(LIBTOOL)dnl # Prevent multiple expansion define([AC_PROG_LIBTOOL], []) ])# _AC_PROG_LIBTOOL # AC_LIBTOOL_SETUP # ---------------- AC_DEFUN([AC_LIBTOOL_SETUP], [AC_PREREQ(2.50)dnl AC_REQUIRE([AC_ENABLE_SHARED])dnl AC_REQUIRE([AC_ENABLE_STATIC])dnl AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_PROG_LD])dnl AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl AC_REQUIRE([AC_PROG_NM])dnl AC_REQUIRE([AC_PROG_LN_S])dnl AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl # Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! AC_REQUIRE([AC_OBJEXT])dnl AC_REQUIRE([AC_EXEEXT])dnl dnl AC_LIBTOOL_SYS_MAX_CMD_LEN AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE AC_LIBTOOL_OBJDIR AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl _LT_AC_PROG_ECHO_BACKSLASH case $host_os in aix3*) # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi ;; esac # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. Xsed='sed -e 1s/^X//' [sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'] # Same as above, but do not quote variable references. [double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'] # Sed substitution to delay expansion of an escaped shell variable in a # double_quote_subst'ed string. delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' # Sed substitution to avoid accidental globbing in evaled expressions no_glob_subst='s/\*/\\\*/g' # Constants: rm="rm -f" # Global variables: default_ofile=libtool can_build_shared=yes # All known linkers require a `.a' archive for static linking (except MSVC, # which needs '.lib'). libext=a ltmain="$ac_aux_dir/ltmain.sh" ofile="$default_ofile" with_gnu_ld="$lt_cv_prog_gnu_ld" AC_CHECK_TOOL(AR, ar, false) AC_CHECK_TOOL(RANLIB, ranlib, :) AC_CHECK_TOOL(STRIP, strip, :) old_CC="$CC" old_CFLAGS="$CFLAGS" # Set sane defaults for various variables test -z "$AR" && AR=ar test -z "$AR_FLAGS" && AR_FLAGS=cru test -z "$AS" && AS=as test -z "$CC" && CC=cc test -z "$LTCC" && LTCC=$CC test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS test -z "$DLLTOOL" && DLLTOOL=dlltool test -z "$LD" && LD=ld test -z "$LN_S" && LN_S="ln -s" test -z "$MAGIC_CMD" && MAGIC_CMD=file test -z "$NM" && NM=nm test -z "$SED" && SED=sed test -z "$OBJDUMP" && OBJDUMP=objdump test -z "$RANLIB" && RANLIB=: test -z "$STRIP" && STRIP=: test -z "$ac_objext" && ac_objext=o # Determine commands to create old-style static archives. old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' old_postinstall_cmds='chmod 644 $oldlib' old_postuninstall_cmds= if test -n "$RANLIB"; then case $host_os in openbsd*) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" ;; *) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" ;; esac old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" fi _LT_CC_BASENAME([$compiler]) # Only perform the check for file, if the check method requires it case $deplibs_check_method in file_magic*) if test "$file_magic_cmd" = '$MAGIC_CMD'; then AC_PATH_MAGIC fi ;; esac _LT_REQUIRED_DARWIN_CHECKS AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no) AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], enable_win32_dll=yes, enable_win32_dll=no) AC_ARG_ENABLE([libtool-lock], [AC_HELP_STRING([--disable-libtool-lock], [avoid locking (might break parallel builds)])]) test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes AC_ARG_WITH([pic], [AC_HELP_STRING([--with-pic], [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], [pic_mode="$withval"], [pic_mode=default]) test -z "$pic_mode" && pic_mode=default # Use C for the default configuration in the libtool script tagname= AC_LIBTOOL_LANG_C_CONFIG _LT_AC_TAGCONFIG ])# AC_LIBTOOL_SETUP # _LT_AC_SYS_COMPILER # ------------------- AC_DEFUN([_LT_AC_SYS_COMPILER], [AC_REQUIRE([AC_PROG_CC])dnl # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} # If no C compiler flags were specified, use CFLAGS. LTCFLAGS=${LTCFLAGS-"$CFLAGS"} # Allow CC to be a program name with arguments. compiler=$CC ])# _LT_AC_SYS_COMPILER # _LT_CC_BASENAME(CC) # ------------------- # Calculate cc_basename. Skip known compiler wrappers and cross-prefix. AC_DEFUN([_LT_CC_BASENAME], [for cc_temp in $1""; do case $cc_temp in compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; \-*) ;; *) break;; esac done cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` ]) # _LT_COMPILER_BOILERPLATE # ------------------------ # Check for compiler boilerplate output or warnings with # the simple compiler test code. AC_DEFUN([_LT_COMPILER_BOILERPLATE], [AC_REQUIRE([LT_AC_PROG_SED])dnl ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" >conftest.$ac_ext eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_compiler_boilerplate=`cat conftest.err` $rm conftest* ])# _LT_COMPILER_BOILERPLATE # _LT_LINKER_BOILERPLATE # ---------------------- # Check for linker boilerplate output or warnings with # the simple link test code. AC_DEFUN([_LT_LINKER_BOILERPLATE], [AC_REQUIRE([LT_AC_PROG_SED])dnl ac_outfile=conftest.$ac_objext echo "$lt_simple_link_test_code" >conftest.$ac_ext eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_linker_boilerplate=`cat conftest.err` $rm -r conftest* ])# _LT_LINKER_BOILERPLATE # _LT_REQUIRED_DARWIN_CHECKS # -------------------------- # Check for some things on darwin AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS],[ case $host_os in rhapsody* | darwin*) AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:]) AC_CHECK_TOOL([NMEDIT], [nmedit], [:]) AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod], [lt_cv_apple_cc_single_mod=no if test -z "${LT_MULTI_MODULE}"; then # By default we will add the -single_module flag. You can override # by either setting the environment variable LT_MULTI_MODULE # non-empty at configure time, or by adding -multi_module to the # link flags. echo "int foo(void){return 1;}" > conftest.c $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ -dynamiclib ${wl}-single_module conftest.c if test -f libconftest.dylib; then lt_cv_apple_cc_single_mod=yes rm -rf libconftest.dylib* fi rm conftest.c fi]) AC_CACHE_CHECK([for -exported_symbols_list linker flag], [lt_cv_ld_exported_symbols_list], [lt_cv_ld_exported_symbols_list=no save_LDFLAGS=$LDFLAGS echo "_main" > conftest.sym LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], [lt_cv_ld_exported_symbols_list=yes], [lt_cv_ld_exported_symbols_list=no]) LDFLAGS="$save_LDFLAGS" ]) case $host_os in rhapsody* | darwin1.[[0123]]) _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; darwin1.*) _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; darwin*) # if running on 10.5 or later, the deployment target defaults # to the OS version, if on x86, and 10.4, the deployment # target defaults to 10.4. Don't you love it? case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*) _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; 10.[[012]]*) _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; 10.*) _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; esac ;; esac if test "$lt_cv_apple_cc_single_mod" = "yes"; then _lt_dar_single_mod='$single_module' fi if test "$lt_cv_ld_exported_symbols_list" = "yes"; then _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' else _lt_dar_export_syms="~$NMEDIT -s \$output_objdir/\${libname}-symbols.expsym \${lib}" fi if test "$DSYMUTIL" != ":"; then _lt_dsymutil="~$DSYMUTIL \$lib || :" else _lt_dsymutil= fi ;; esac ]) # _LT_AC_SYS_LIBPATH_AIX # ---------------------- # Links a minimal program and checks the executable # for the system default hardcoded library path. In most cases, # this is /usr/lib:/lib, but when the MPI compilers are used # the location of the communication and MPI libs are included too. # If we don't find anything, use the default library path according # to the aix ld manual. AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX], [AC_REQUIRE([LT_AC_PROG_SED])dnl AC_LINK_IFELSE(AC_LANG_PROGRAM,[ lt_aix_libpath_sed=' /Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/ p } }' aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi],[]) if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ])# _LT_AC_SYS_LIBPATH_AIX # _LT_AC_SHELL_INIT(ARG) # ---------------------- AC_DEFUN([_LT_AC_SHELL_INIT], [ifdef([AC_DIVERSION_NOTICE], [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], [AC_DIVERT_PUSH(NOTICE)]) $1 AC_DIVERT_POP ])# _LT_AC_SHELL_INIT # _LT_AC_PROG_ECHO_BACKSLASH # -------------------------- # Add some code to the start of the generated configure script which # will find an echo command which doesn't interpret backslashes. AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH], [_LT_AC_SHELL_INIT([ # Check that we are running under the correct shell. SHELL=${CONFIG_SHELL-/bin/sh} case X$ECHO in X*--fallback-echo) # Remove one level of quotation (which was required for Make). ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` ;; esac echo=${ECHO-echo} if test "X[$]1" = X--no-reexec; then # Discard the --no-reexec flag, and continue. shift elif test "X[$]1" = X--fallback-echo; then # Avoid inline document here, it may be left over : elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then # Yippee, $echo works! : else # Restart under the correct shell. exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} fi if test "X[$]1" = X--fallback-echo; then # used as fallback echo shift cat </dev/null 2>&1 && unset CDPATH if test -z "$ECHO"; then if test "X${echo_test_string+set}" != Xset; then # find a string as large as possible, as long as the shell can cope with it for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... if (echo_test_string=`eval $cmd`) 2>/dev/null && echo_test_string=`eval $cmd` && (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null then break fi done fi if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then : else # The Solaris, AIX, and Digital Unix default echo programs unquote # backslashes. This makes it impossible to quote backslashes using # echo "$something" | sed 's/\\/\\\\/g' # # So, first we look for a working echo in the user's PATH. lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for dir in $PATH /usr/ucb; do IFS="$lt_save_ifs" if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then echo="$dir/echo" break fi done IFS="$lt_save_ifs" if test "X$echo" = Xecho; then # We didn't find a better echo, so look for alternatives. if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then # This shell has a builtin print -r that does the trick. echo='print -r' elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && test "X$CONFIG_SHELL" != X/bin/ksh; then # If we have ksh, try running configure again with it. ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} export ORIGINAL_CONFIG_SHELL CONFIG_SHELL=/bin/ksh export CONFIG_SHELL exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} else # Try using printf. echo='printf %s\n' if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then # Cool, printf works : elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && test "X$echo_testing_string" = 'X\t' && echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL export CONFIG_SHELL SHELL="$CONFIG_SHELL" export SHELL echo="$CONFIG_SHELL [$]0 --fallback-echo" elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && test "X$echo_testing_string" = 'X\t' && echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then echo="$CONFIG_SHELL [$]0 --fallback-echo" else # maybe with a smaller string... prev=: for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null then break fi prev="$cmd" done if test "$prev" != 'sed 50q "[$]0"'; then echo_test_string=`eval $prev` export echo_test_string exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} else # Oops. We lost completely, so just stick with echo. echo=echo fi fi fi fi fi fi # Copy echo and quote the copy suitably for passing to libtool from # the Makefile, instead of quoting the original, which is used later. ECHO=$echo if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" fi AC_SUBST(ECHO) ])])# _LT_AC_PROG_ECHO_BACKSLASH # _LT_AC_LOCK # ----------- AC_DEFUN([_LT_AC_LOCK], [AC_ARG_ENABLE([libtool-lock], [AC_HELP_STRING([--disable-libtool-lock], [avoid locking (might break parallel builds)])]) test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes # Some flags need to be propagated to the compiler or linker for good # libtool support. case $host in ia64-*-hpux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case `/usr/bin/file conftest.$ac_objext` in *ELF-32*) HPUX_IA64_MODE="32" ;; *ELF-64*) HPUX_IA64_MODE="64" ;; esac fi rm -rf conftest* ;; *-*-irix6*) # Find out which ABI we are using. echo '[#]line __oline__ "configure"' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then if test "$lt_cv_prog_gnu_ld" = yes; then case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -melf32bsmip" ;; *N32*) LD="${LD-ld} -melf32bmipn32" ;; *64-bit*) LD="${LD-ld} -melf64bmip" ;; esac else case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -32" ;; *N32*) LD="${LD-ld} -n32" ;; *64-bit*) LD="${LD-ld} -64" ;; esac fi fi rm -rf conftest* ;; x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ s390*-*linux*|sparc*-*linux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case `/usr/bin/file conftest.o` in *32-bit*) case $host in x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_i386_fbsd" ;; x86_64-*linux*) LD="${LD-ld} -m elf_i386" ;; ppc64-*linux*|powerpc64-*linux*) LD="${LD-ld} -m elf32ppclinux" ;; s390x-*linux*) LD="${LD-ld} -m elf_s390" ;; sparc64-*linux*) LD="${LD-ld} -m elf32_sparc" ;; esac ;; *64-bit*) case $host in x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_x86_64_fbsd" ;; x86_64-*linux*) LD="${LD-ld} -m elf_x86_64" ;; ppc*-*linux*|powerpc*-*linux*) LD="${LD-ld} -m elf64ppc" ;; s390*-*linux*) LD="${LD-ld} -m elf64_s390" ;; sparc*-*linux*) LD="${LD-ld} -m elf64_sparc" ;; esac ;; esac fi rm -rf conftest* ;; *-*-sco3.2v5*) # On SCO OpenServer 5, we need -belf to get full-featured binaries. SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, [AC_LANG_PUSH(C) AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) AC_LANG_POP]) if test x"$lt_cv_cc_needs_belf" != x"yes"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf CFLAGS="$SAVE_CFLAGS" fi ;; sparc*-*solaris*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case `/usr/bin/file conftest.o` in *64-bit*) case $lt_cv_prog_gnu_ld in yes*) LD="${LD-ld} -m elf64_sparc" ;; *) if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then LD="${LD-ld} -64" fi ;; esac ;; esac fi rm -rf conftest* ;; AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], [*-*-cygwin* | *-*-mingw* | *-*-pw32*) AC_CHECK_TOOL(DLLTOOL, dlltool, false) AC_CHECK_TOOL(AS, as, false) AC_CHECK_TOOL(OBJDUMP, objdump, false) ;; ]) esac need_locks="$enable_libtool_lock" ])# _LT_AC_LOCK # AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, # [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) # ---------------------------------------------------------------- # Check whether the given compiler option works AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [AC_REQUIRE([LT_AC_PROG_SED]) AC_CACHE_CHECK([$1], [$2], [$2=no ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="$3" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&AS_MESSAGE_LOG_FD echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then $2=yes fi fi $rm conftest* ]) if test x"[$]$2" = xyes; then ifelse([$5], , :, [$5]) else ifelse([$6], , :, [$6]) fi ])# AC_LIBTOOL_COMPILER_OPTION # AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, # [ACTION-SUCCESS], [ACTION-FAILURE]) # ------------------------------------------------------------ # Check whether the given compiler option works AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [AC_REQUIRE([LT_AC_PROG_SED])dnl AC_CACHE_CHECK([$1], [$2], [$2=no save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS $3" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then # The linker can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&AS_MESSAGE_LOG_FD $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then $2=yes fi else $2=yes fi fi $rm -r conftest* LDFLAGS="$save_LDFLAGS" ]) if test x"[$]$2" = xyes; then ifelse([$4], , :, [$4]) else ifelse([$5], , :, [$5]) fi ])# AC_LIBTOOL_LINKER_OPTION # AC_LIBTOOL_SYS_MAX_CMD_LEN # -------------------------- AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [# find the maximum length of command line arguments AC_MSG_CHECKING([the maximum length of command line arguments]) AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl i=0 teststring="ABCD" case $build_os in msdosdjgpp*) # On DJGPP, this test can blow up pretty badly due to problems in libc # (any single argument exceeding 2000 bytes causes a buffer overrun # during glob expansion). Even if it were fixed, the result of this # check would be larger than it should be. lt_cv_sys_max_cmd_len=12288; # 12K is about right ;; gnu*) # Under GNU Hurd, this test is not required because there is # no limit to the length of command line arguments. # Libtool will interpret -1 as no limit whatsoever lt_cv_sys_max_cmd_len=-1; ;; cygwin* | mingw*) # On Win9x/ME, this test blows up -- it succeeds, but takes # about 5 minutes as the teststring grows exponentially. # Worse, since 9x/ME are not pre-emptively multitasking, # you end up with a "frozen" computer, even though with patience # the test eventually succeeds (with a max line length of 256k). # Instead, let's just punt: use the minimum linelength reported by # all of the supported platforms: 8192 (on NT/2K/XP). lt_cv_sys_max_cmd_len=8192; ;; amigaos*) # On AmigaOS with pdksh, this test takes hours, literally. # So we just punt and use a minimum line length of 8192. lt_cv_sys_max_cmd_len=8192; ;; netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) # This has been around since 386BSD, at least. Likely further. if test -x /sbin/sysctl; then lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` elif test -x /usr/sbin/sysctl; then lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` else lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs fi # And add a safety zone lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ;; interix*) # We know the value 262144 and hardcode it with a safety zone (like BSD) lt_cv_sys_max_cmd_len=196608 ;; osf*) # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not # nice to cause kernel panics so lets avoid the loop below. # First set a reasonable default. lt_cv_sys_max_cmd_len=16384 # if test -x /sbin/sysconfig; then case `/sbin/sysconfig -q proc exec_disable_arg_limit` in *1*) lt_cv_sys_max_cmd_len=-1 ;; esac fi ;; sco3.2v5*) lt_cv_sys_max_cmd_len=102400 ;; sysv5* | sco5v6* | sysv4.2uw2*) kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` if test -n "$kargmax"; then lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` else lt_cv_sys_max_cmd_len=32768 fi ;; *) lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` if test -n "$lt_cv_sys_max_cmd_len"; then lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` else SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \ = "XX$teststring") >/dev/null 2>&1 && new_result=`expr "X$teststring" : ".*" 2>&1` && lt_cv_sys_max_cmd_len=$new_result && test $i != 17 # 1/2 MB should be enough do i=`expr $i + 1` teststring=$teststring$teststring done teststring= # Add a significant safety factor because C++ compilers can tack on massive # amounts of additional arguments before passing them to the linker. # It appears as though 1/2 is a usable value. lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` fi ;; esac ]) if test -n $lt_cv_sys_max_cmd_len ; then AC_MSG_RESULT($lt_cv_sys_max_cmd_len) else AC_MSG_RESULT(none) fi ])# AC_LIBTOOL_SYS_MAX_CMD_LEN # _LT_AC_CHECK_DLFCN # ------------------ AC_DEFUN([_LT_AC_CHECK_DLFCN], [AC_CHECK_HEADERS(dlfcn.h)dnl ])# _LT_AC_CHECK_DLFCN # _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, # ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) # --------------------------------------------------------------------- AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF], [AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl if test "$cross_compiling" = yes; then : [$4] else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext < #endif #include #ifdef RTLD_GLOBAL # define LT_DLGLOBAL RTLD_GLOBAL #else # ifdef DL_GLOBAL # define LT_DLGLOBAL DL_GLOBAL # else # define LT_DLGLOBAL 0 # endif #endif /* We may have to define LT_DLLAZY_OR_NOW in the command line if we find out it does not work in some platform. */ #ifndef LT_DLLAZY_OR_NOW # ifdef RTLD_LAZY # define LT_DLLAZY_OR_NOW RTLD_LAZY # else # ifdef DL_LAZY # define LT_DLLAZY_OR_NOW DL_LAZY # else # ifdef RTLD_NOW # define LT_DLLAZY_OR_NOW RTLD_NOW # else # ifdef DL_NOW # define LT_DLLAZY_OR_NOW DL_NOW # else # define LT_DLLAZY_OR_NOW 0 # endif # endif # endif # endif #endif #ifdef __cplusplus extern "C" void exit (int); #endif void fnord() { int i=42;} int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); int status = $lt_dlunknown; if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; /* dlclose (self); */ } else puts (dlerror ()); exit (status); }] EOF if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) $1 ;; x$lt_dlneed_uscore) $2 ;; x$lt_dlunknown|x*) $3 ;; esac else : # compilation failed $3 fi fi rm -fr conftest* ])# _LT_AC_TRY_DLOPEN_SELF # AC_LIBTOOL_DLOPEN_SELF # ---------------------- AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl if test "x$enable_dlopen" != xyes; then enable_dlopen=unknown enable_dlopen_self=unknown enable_dlopen_self_static=unknown else lt_cv_dlopen=no lt_cv_dlopen_libs= case $host_os in beos*) lt_cv_dlopen="load_add_on" lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ;; mingw* | pw32*) lt_cv_dlopen="LoadLibrary" lt_cv_dlopen_libs= ;; cygwin*) lt_cv_dlopen="dlopen" lt_cv_dlopen_libs= ;; darwin*) # if libdl is installed we need to link against it AC_CHECK_LIB([dl], [dlopen], [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ lt_cv_dlopen="dyld" lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ]) ;; *) AC_CHECK_FUNC([shl_load], [lt_cv_dlopen="shl_load"], [AC_CHECK_LIB([dld], [shl_load], [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"], [AC_CHECK_FUNC([dlopen], [lt_cv_dlopen="dlopen"], [AC_CHECK_LIB([dl], [dlopen], [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], [AC_CHECK_LIB([svld], [dlopen], [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], [AC_CHECK_LIB([dld], [dld_link], [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"]) ]) ]) ]) ]) ]) ;; esac if test "x$lt_cv_dlopen" != xno; then enable_dlopen=yes else enable_dlopen=no fi case $lt_cv_dlopen in dlopen) save_CPPFLAGS="$CPPFLAGS" test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" save_LDFLAGS="$LDFLAGS" wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" save_LIBS="$LIBS" LIBS="$lt_cv_dlopen_libs $LIBS" AC_CACHE_CHECK([whether a program can dlopen itself], lt_cv_dlopen_self, [dnl _LT_AC_TRY_DLOPEN_SELF( lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) ]) if test "x$lt_cv_dlopen_self" = xyes; then wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" AC_CACHE_CHECK([whether a statically linked program can dlopen itself], lt_cv_dlopen_self_static, [dnl _LT_AC_TRY_DLOPEN_SELF( lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) ]) fi CPPFLAGS="$save_CPPFLAGS" LDFLAGS="$save_LDFLAGS" LIBS="$save_LIBS" ;; esac case $lt_cv_dlopen_self in yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; *) enable_dlopen_self=unknown ;; esac case $lt_cv_dlopen_self_static in yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; *) enable_dlopen_self_static=unknown ;; esac fi ])# AC_LIBTOOL_DLOPEN_SELF # AC_LIBTOOL_PROG_CC_C_O([TAGNAME]) # --------------------------------- # Check to see if options -c and -o are simultaneously supported by compiler AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O], [AC_REQUIRE([LT_AC_PROG_SED])dnl AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)], [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no $rm -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&AS_MESSAGE_LOG_FD echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes fi fi chmod u+w . 2>&AS_MESSAGE_LOG_FD $rm conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files $rm out/* && rmdir out cd .. rmdir conftest $rm conftest* ]) ])# AC_LIBTOOL_PROG_CC_C_O # AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME]) # ----------------------------------------- # Check to see if we can do hard links to lock some files if needed AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_REQUIRE([_LT_AC_LOCK])dnl hard_links="nottested" if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then # do not overwrite the value of need_locks provided by the user AC_MSG_CHECKING([if we can lock with hard links]) hard_links=yes $rm conftest* ln conftest.a conftest.b 2>/dev/null && hard_links=no touch conftest.a ln conftest.a conftest.b 2>&5 || hard_links=no ln conftest.a conftest.b 2>/dev/null && hard_links=no AC_MSG_RESULT([$hard_links]) if test "$hard_links" = no; then AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) need_locks=warn fi else need_locks=no fi ])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS # AC_LIBTOOL_OBJDIR # ----------------- AC_DEFUN([AC_LIBTOOL_OBJDIR], [AC_CACHE_CHECK([for objdir], [lt_cv_objdir], [rm -f .libs 2>/dev/null mkdir .libs 2>/dev/null if test -d .libs; then lt_cv_objdir=.libs else # MS-DOS does not allow filenames that begin with a dot. lt_cv_objdir=_libs fi rmdir .libs 2>/dev/null]) objdir=$lt_cv_objdir ])# AC_LIBTOOL_OBJDIR # AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME]) # ---------------------------------------------- # Check hardcoding attributes. AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_MSG_CHECKING([how to hardcode library paths into programs]) _LT_AC_TAGVAR(hardcode_action, $1)= if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \ test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \ test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then # We can hardcode non-existant directories. if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no && # If the only mechanism to avoid hardcoding is shlibpath_var, we # have to relink, otherwise we might link with an installed library # when we should be linking with a yet-to-be-installed one ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no && test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then # Linking always hardcodes the temporary library directory. _LT_AC_TAGVAR(hardcode_action, $1)=relink else # We can link without hardcoding, and we can hardcode nonexisting dirs. _LT_AC_TAGVAR(hardcode_action, $1)=immediate fi else # We cannot hardcode anything, or else we can only hardcode existing # directories. _LT_AC_TAGVAR(hardcode_action, $1)=unsupported fi AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)]) if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then # Fast installation is not supported enable_fast_install=no elif test "$shlibpath_overrides_runpath" = yes || test "$enable_shared" = no; then # Fast installation is not necessary enable_fast_install=needless fi ])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH # AC_LIBTOOL_SYS_LIB_STRIP # ------------------------ AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP], [striplib= old_striplib= AC_MSG_CHECKING([whether stripping libraries is possible]) if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" test -z "$striplib" && striplib="$STRIP --strip-unneeded" AC_MSG_RESULT([yes]) else # FIXME - insert some real tests, host_os isn't really good enough case $host_os in darwin*) if test -n "$STRIP" ; then striplib="$STRIP -x" old_striplib="$STRIP -S" AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) fi ;; *) AC_MSG_RESULT([no]) ;; esac fi ])# AC_LIBTOOL_SYS_LIB_STRIP # AC_LIBTOOL_SYS_DYNAMIC_LINKER # ----------------------------- # PORTME Fill in your ld.so characteristics AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_REQUIRE([LT_AC_PROG_SED])dnl AC_MSG_CHECKING([dynamic linker characteristics]) library_names_spec= libname_spec='lib$name' soname_spec= shrext_cmds=".so" postinstall_cmds= postuninstall_cmds= finish_cmds= finish_eval= shlibpath_var= shlibpath_overrides_runpath=unknown version_type=none dynamic_linker="$host_os ld.so" sys_lib_dlsearch_path_spec="/lib /usr/lib" m4_if($1,[],[ if test "$GCC" = yes; then case $host_os in darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; *) lt_awk_arg="/^libraries:/" ;; esac lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"` if echo "$lt_search_path_spec" | grep ';' >/dev/null ; then # if the path contains ";" then we assume it to be the separator # otherwise default to the standard path separator (i.e. ":") - it is # assumed that no part of a normal pathname contains ";" but that should # okay in the real world where ";" in dirpaths is itself problematic. lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e 's/;/ /g'` else lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi # Ok, now we have the path, separated by spaces, we can step through it # and add multilib dir if necessary. lt_tmp_lt_search_path_spec= lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` for lt_sys_path in $lt_search_path_spec; do if test -d "$lt_sys_path/$lt_multi_os_dir"; then lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" else test -d "$lt_sys_path" && \ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" fi done lt_search_path_spec=`echo $lt_tmp_lt_search_path_spec | awk ' BEGIN {RS=" "; FS="/|\n";} { lt_foo=""; lt_count=0; for (lt_i = NF; lt_i > 0; lt_i--) { if ($lt_i != "" && $lt_i != ".") { if ($lt_i == "..") { lt_count++; } else { if (lt_count == 0) { lt_foo="/" $lt_i lt_foo; } else { lt_count--; } } } } if (lt_foo != "") { lt_freq[[lt_foo]]++; } if (lt_freq[[lt_foo]] == 1) { print lt_foo; } }'` sys_lib_search_path_spec=`echo $lt_search_path_spec` else sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" fi]) need_lib_prefix=unknown hardcode_into_libs=no # when you set need_version to no, make sure it does not cause -set_version # flags to be left without arguments need_version=unknown case $host_os in aix3*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' shlibpath_var=LIBPATH # AIX 3 has no versioning support, so we append a major version to the name. soname_spec='${libname}${release}${shared_ext}$major' ;; aix[[4-9]]*) version_type=linux need_lib_prefix=no need_version=no hardcode_into_libs=yes if test "$host_cpu" = ia64; then # AIX 5 supports IA64 library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH else # With GCC up to 2.95.x, collect2 would create an import file # for dependence libraries. The import file would start with # the line `#! .'. This would cause the generated library to # depend on `.', always an invalid library. This was fixed in # development snapshots of GCC prior to 3.0. case $host_os in aix4 | aix4.[[01]] | aix4.[[01]].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then : else can_build_shared=no fi ;; esac # AIX (on Power*) has no versioning support, so currently we can not hardcode correct # soname into executable. Probably we can add versioning support to # collect2, so additional links can be useful in future. if test "$aix_use_runtimelinking" = yes; then # If using run time linking (on AIX 4.2 or later) use lib.so # instead of lib.a to let people know that these are not # typical AIX shared libraries. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' else # We preserve .a as extension for shared libraries through AIX4.2 # and later when we are not doing run time linking. library_names_spec='${libname}${release}.a $libname.a' soname_spec='${libname}${release}${shared_ext}$major' fi shlibpath_var=LIBPATH fi ;; amigaos*) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; beos*) library_names_spec='${libname}${shared_ext}' dynamic_linker="$host_os ld.so" shlibpath_var=LIBRARY_PATH ;; bsdi[[45]]*) version_type=linux need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" # the default ld.so.conf also contains /usr/contrib/lib and # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow # libtool to hard-code these into programs ;; cygwin* | mingw* | pw32*) version_type=windows shrext_cmds=".dll" need_version=no need_lib_prefix=no case $GCC,$host_os in yes,cygwin* | yes,mingw* | yes,pw32*) library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname~ chmod a+x \$dldir/$dlname' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $rm \$dlpath' shlibpath_overrides_runpath=yes case $host_os in cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" ;; mingw*) # MinGW DLLs use traditional 'lib' prefix soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then # It is most probably a Windows format PATH printed by # mingw gcc, but we are running on Cygwin. Gcc prints its search # path with ; separators, and with drive letters. We can handle the # drive letters (cygwin fileutils understands them), so leave them, # especially as we might pass files found there to a mingw objdump, # which wouldn't understand a cygwinified path. Ahh. sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` else sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' ;; esac ;; *) library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' ;; esac dynamic_linker='Win32 ld.exe' # FIXME: first we should search . and the directory the executable is in shlibpath_var=PATH ;; darwin* | rhapsody*) dynamic_linker="$host_os dyld" version_type=darwin need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' soname_spec='${libname}${release}${major}$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' m4_if([$1], [],[ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ;; dgux*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; freebsd1*) dynamic_linker=no ;; freebsd* | dragonfly*) # DragonFly does not have aout. When/if they implement a new # versioning mechanism, adjust this. if test -x /usr/bin/objformat; then objformat=`/usr/bin/objformat` else case $host_os in freebsd[[123]]*) objformat=aout ;; *) objformat=elf ;; esac fi version_type=freebsd-$objformat case $version_type in freebsd-elf*) library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' need_version=no need_lib_prefix=no ;; freebsd-*) library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' need_version=yes ;; esac shlibpath_var=LD_LIBRARY_PATH case $host_os in freebsd2*) shlibpath_overrides_runpath=yes ;; freebsd3.[[01]]* | freebsdelf3.[[01]]*) shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \ freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1) shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; *) # from 4.6 on, and DragonFly shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; esac ;; gnu*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH hardcode_into_libs=yes ;; hpux9* | hpux10* | hpux11*) # Give a soname corresponding to the major version so that dld.sl refuses to # link against other versions. version_type=sunos need_lib_prefix=no need_version=no case $host_cpu in ia64*) shrext_cmds='.so' hardcode_into_libs=yes dynamic_linker="$host_os dld.so" shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' if test "X$HPUX_IA64_MODE" = X32; then sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" else sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" fi sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; hppa*64*) shrext_cmds='.sl' hardcode_into_libs=yes dynamic_linker="$host_os dld.sl" shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; *) shrext_cmds='.sl' dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' ;; esac # HP-UX runs *really* slowly unless shared libraries are mode 555. postinstall_cmds='chmod 555 $lib' ;; interix[[3-9]]*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; irix5* | irix6* | nonstopux*) case $host_os in nonstopux*) version_type=nonstopux ;; *) if test "$lt_cv_prog_gnu_ld" = yes; then version_type=linux else version_type=irix fi ;; esac need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' case $host_os in irix5* | nonstopux*) libsuff= shlibsuff= ;; *) case $LD in # libtool.m4 will add one of these switches to LD *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= libmagic=32-bit;; *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 libmagic=64-bit;; *) libsuff= shlibsuff= libmagic=never-match;; esac ;; esac shlibpath_var=LD_LIBRARY${shlibsuff}_PATH shlibpath_overrides_runpath=no sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" hardcode_into_libs=yes ;; # No shared lib support for Linux oldld, aout, or coff. linux*oldld* | linux*aout* | linux*coff*) dynamic_linker=no ;; # This must be Linux ELF. linux* | k*bsd*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" fi # We used to test for /lib/ld.so.1 and disable shared libraries on # powerpc, because MkLinux only supported shared libraries with the # GNU dynamic linker. Since this was broken with cross compilers, # most powerpc-linux boxes support dynamic linking these days and # people can always --disable-shared, the test was removed, and we # assume the GNU/Linux dynamic linker is in use. dynamic_linker='GNU/Linux ld.so' ;; netbsdelf*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='NetBSD ld.elf_so' ;; netbsd*) version_type=sunos need_lib_prefix=no need_version=no if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='NetBSD ld.elf_so' fi shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; newsos6) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; nto-qnx*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; openbsd*) version_type=sunos sys_lib_dlsearch_path_spec="/usr/lib" need_lib_prefix=no # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. case $host_os in openbsd3.3 | openbsd3.3.*) need_version=yes ;; *) need_version=no ;; esac library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then case $host_os in openbsd2.[[89]] | openbsd2.[[89]].*) shlibpath_overrides_runpath=no ;; *) shlibpath_overrides_runpath=yes ;; esac else shlibpath_overrides_runpath=yes fi ;; os2*) libname_spec='$name' shrext_cmds=".dll" need_lib_prefix=no library_names_spec='$libname${shared_ext} $libname.a' dynamic_linker='OS/2 ld.exe' shlibpath_var=LIBPATH ;; osf3* | osf4* | osf5*) version_type=osf need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ;; rdos*) dynamic_linker=no ;; solaris*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes # ldd complains unless libraries are executable postinstall_cmds='chmod +x $lib' ;; sunos4*) version_type=sunos library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes if test "$with_gnu_ld" = yes; then need_lib_prefix=no fi need_version=yes ;; sysv4 | sysv4.3*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH case $host_vendor in sni) shlibpath_overrides_runpath=no need_lib_prefix=no export_dynamic_flag_spec='${wl}-Blargedynsym' runpath_var=LD_RUN_PATH ;; siemens) need_lib_prefix=no ;; motorola) need_lib_prefix=no need_version=no shlibpath_overrides_runpath=no sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ;; esac ;; sysv4*MP*) if test -d /usr/nec ;then version_type=linux library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' soname_spec='$libname${shared_ext}.$major' shlibpath_var=LD_LIBRARY_PATH fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) version_type=freebsd-elf need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH hardcode_into_libs=yes if test "$with_gnu_ld" = yes; then sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' shlibpath_overrides_runpath=no else sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' shlibpath_overrides_runpath=yes case $host_os in sco3.2v5*) sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ;; esac fi sys_lib_dlsearch_path_spec='/usr/lib' ;; uts4*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; *) dynamic_linker=no ;; esac AC_MSG_RESULT([$dynamic_linker]) test "$dynamic_linker" = no && can_build_shared=no AC_CACHE_VAL([lt_cv_sys_lib_search_path_spec], [lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"]) sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" AC_CACHE_VAL([lt_cv_sys_lib_dlsearch_path_spec], [lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"]) sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" variables_saved_for_relink="PATH $shlibpath_var $runpath_var" if test "$GCC" = yes; then variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi ])# AC_LIBTOOL_SYS_DYNAMIC_LINKER # _LT_AC_TAGCONFIG # ---------------- AC_DEFUN([_LT_AC_TAGCONFIG], [AC_REQUIRE([LT_AC_PROG_SED])dnl AC_ARG_WITH([tags], [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@], [include additional configurations @<:@automatic@:>@])], [tagnames="$withval"]) if test -f "$ltmain" && test -n "$tagnames"; then if test ! -f "${ofile}"; then AC_MSG_WARN([output file `$ofile' does not exist]) fi if test -z "$LTCC"; then eval "`$SHELL ${ofile} --config | grep '^LTCC='`" if test -z "$LTCC"; then AC_MSG_WARN([output file `$ofile' does not look like a libtool script]) else AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile']) fi fi if test -z "$LTCFLAGS"; then eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`" fi # Extract list of available tagged configurations in $ofile. # Note that this assumes the entire list is on one line. available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'` lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for tagname in $tagnames; do IFS="$lt_save_ifs" # Check whether tagname contains only valid characters case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in "") ;; *) AC_MSG_ERROR([invalid tag name: $tagname]) ;; esac if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null then AC_MSG_ERROR([tag name \"$tagname\" already exists]) fi # Update the list of available tags. if test -n "$tagname"; then echo appending configuration tag \"$tagname\" to $ofile case $tagname in CXX) if test -n "$CXX" && ( test "X$CXX" != "Xno" && ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || (test "X$CXX" != "Xg++"))) ; then AC_LIBTOOL_LANG_CXX_CONFIG else tagname="" fi ;; F77) if test -n "$F77" && test "X$F77" != "Xno"; then AC_LIBTOOL_LANG_F77_CONFIG else tagname="" fi ;; GCJ) if test -n "$GCJ" && test "X$GCJ" != "Xno"; then AC_LIBTOOL_LANG_GCJ_CONFIG else tagname="" fi ;; RC) AC_LIBTOOL_LANG_RC_CONFIG ;; *) AC_MSG_ERROR([Unsupported tag name: $tagname]) ;; esac # Append the new tag name to the list of available tags. if test -n "$tagname" ; then available_tags="$available_tags $tagname" fi fi done IFS="$lt_save_ifs" # Now substitute the updated list of available tags. if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then mv "${ofile}T" "$ofile" chmod +x "$ofile" else rm -f "${ofile}T" AC_MSG_ERROR([unable to update list of available tagged configurations.]) fi fi ])# _LT_AC_TAGCONFIG # AC_LIBTOOL_DLOPEN # ----------------- # enable checks for dlopen support AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP]) ])# AC_LIBTOOL_DLOPEN # AC_LIBTOOL_WIN32_DLL # -------------------- # declare package support for building win32 DLLs AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP]) ])# AC_LIBTOOL_WIN32_DLL # AC_ENABLE_SHARED([DEFAULT]) # --------------------------- # implement the --enable-shared flag # DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. AC_DEFUN([AC_ENABLE_SHARED], [define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE([shared], [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@], [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])], [p=${PACKAGE-default} case $enableval in yes) enable_shared=yes ;; no) enable_shared=no ;; *) enable_shared=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_shared=yes fi done IFS="$lt_save_ifs" ;; esac], [enable_shared=]AC_ENABLE_SHARED_DEFAULT) ])# AC_ENABLE_SHARED # AC_DISABLE_SHARED # ----------------- # set the default shared flag to --disable-shared AC_DEFUN([AC_DISABLE_SHARED], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_ENABLE_SHARED(no) ])# AC_DISABLE_SHARED # AC_ENABLE_STATIC([DEFAULT]) # --------------------------- # implement the --enable-static flag # DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. AC_DEFUN([AC_ENABLE_STATIC], [define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE([static], [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@], [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])], [p=${PACKAGE-default} case $enableval in yes) enable_static=yes ;; no) enable_static=no ;; *) enable_static=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_static=yes fi done IFS="$lt_save_ifs" ;; esac], [enable_static=]AC_ENABLE_STATIC_DEFAULT) ])# AC_ENABLE_STATIC # AC_DISABLE_STATIC # ----------------- # set the default static flag to --disable-static AC_DEFUN([AC_DISABLE_STATIC], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_ENABLE_STATIC(no) ])# AC_DISABLE_STATIC # AC_ENABLE_FAST_INSTALL([DEFAULT]) # --------------------------------- # implement the --enable-fast-install flag # DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. AC_DEFUN([AC_ENABLE_FAST_INSTALL], [define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE([fast-install], [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], [p=${PACKAGE-default} case $enableval in yes) enable_fast_install=yes ;; no) enable_fast_install=no ;; *) enable_fast_install=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_fast_install=yes fi done IFS="$lt_save_ifs" ;; esac], [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT) ])# AC_ENABLE_FAST_INSTALL # AC_DISABLE_FAST_INSTALL # ----------------------- # set the default to --disable-fast-install AC_DEFUN([AC_DISABLE_FAST_INSTALL], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_ENABLE_FAST_INSTALL(no) ])# AC_DISABLE_FAST_INSTALL # AC_LIBTOOL_PICMODE([MODE]) # -------------------------- # implement the --with-pic flag # MODE is either `yes' or `no'. If omitted, it defaults to `both'. AC_DEFUN([AC_LIBTOOL_PICMODE], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl pic_mode=ifelse($#,1,$1,default) ])# AC_LIBTOOL_PICMODE # AC_PROG_EGREP # ------------- # This is predefined starting with Autoconf 2.54, so this conditional # definition can be removed once we require Autoconf 2.54 or later. m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP], [AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep], [if echo a | (grep -E '(a|b)') >/dev/null 2>&1 then ac_cv_prog_egrep='grep -E' else ac_cv_prog_egrep='egrep' fi]) EGREP=$ac_cv_prog_egrep AC_SUBST([EGREP]) ])]) # AC_PATH_TOOL_PREFIX # ------------------- # find a file program which can recognize shared library AC_DEFUN([AC_PATH_TOOL_PREFIX], [AC_REQUIRE([AC_PROG_EGREP])dnl AC_MSG_CHECKING([for $1]) AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, [case $MAGIC_CMD in [[\\/*] | ?:[\\/]*]) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ;; *) lt_save_MAGIC_CMD="$MAGIC_CMD" lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR dnl $ac_dummy forces splitting on constant user-supplied paths. dnl POSIX.2 word splitting is done only on the output of word expansions, dnl not every word. This closes a longstanding sh security hole. ac_dummy="ifelse([$2], , $PATH, [$2])" for ac_dir in $ac_dummy; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$1; then lt_cv_path_MAGIC_CMD="$ac_dir/$1" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then : else cat <&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org EOF fi ;; esac fi break fi done IFS="$lt_save_ifs" MAGIC_CMD="$lt_save_MAGIC_CMD" ;; esac]) MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then AC_MSG_RESULT($MAGIC_CMD) else AC_MSG_RESULT(no) fi ])# AC_PATH_TOOL_PREFIX # AC_PATH_MAGIC # ------------- # find a file program which can recognize a shared library AC_DEFUN([AC_PATH_MAGIC], [AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) if test -z "$lt_cv_path_MAGIC_CMD"; then if test -n "$ac_tool_prefix"; then AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) else MAGIC_CMD=: fi fi ])# AC_PATH_MAGIC # AC_PROG_LD # ---------- # find the pathname to the GNU or non-GNU linker AC_DEFUN([AC_PROG_LD], [AC_ARG_WITH([gnu-ld], [AC_HELP_STRING([--with-gnu-ld], [assume the C compiler uses GNU ld @<:@default=no@:>@])], [test "$withval" = no || with_gnu_ld=yes], [with_gnu_ld=no]) AC_REQUIRE([LT_AC_PROG_SED])dnl AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. AC_MSG_CHECKING([for ld used by $CC]) case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [[\\/]]* | ?:[[\\/]]*) re_direlt='/[[^/]][[^/]]*/\.\./' # Canonicalize the pathname of ld ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then AC_MSG_CHECKING([for GNU ld]) else AC_MSG_CHECKING([for non-GNU ld]) fi AC_CACHE_VAL(lt_cv_path_LD, [if test -z "$LD"; then lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some variants of GNU ld only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$lt_cv_path_LD" -v 2>&1 &1 /dev/null 2>&1; then lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' lt_cv_file_magic_cmd='func_win32_libid' else lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' lt_cv_file_magic_cmd='$OBJDUMP -f' fi ;; darwin* | rhapsody*) lt_cv_deplibs_check_method=pass_all ;; freebsd* | dragonfly*) if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then case $host_cpu in i*86 ) # Not sure whether the presence of OpenBSD here was a mistake. # Let's accept both of them until this is cleared up. lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ;; esac else lt_cv_deplibs_check_method=pass_all fi ;; gnu*) lt_cv_deplibs_check_method=pass_all ;; hpux10.20* | hpux11*) lt_cv_file_magic_cmd=/usr/bin/file case $host_cpu in ia64*) lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so ;; hppa*64*) [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'] lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl ;; *) lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' lt_cv_file_magic_test_file=/usr/lib/libc.sl ;; esac ;; interix[[3-9]]*) # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$' ;; irix5* | irix6* | nonstopux*) case $LD in *-32|*"-32 ") libmagic=32-bit;; *-n32|*"-n32 ") libmagic=N32;; *-64|*"-64 ") libmagic=64-bit;; *) libmagic=never-match;; esac lt_cv_deplibs_check_method=pass_all ;; # This must be Linux ELF. linux* | k*bsd*-gnu) lt_cv_deplibs_check_method=pass_all ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' fi ;; newos6*) lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=/usr/lib/libnls.so ;; nto-qnx*) lt_cv_deplibs_check_method=unknown ;; openbsd*) if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' fi ;; osf3* | osf4* | osf5*) lt_cv_deplibs_check_method=pass_all ;; rdos*) lt_cv_deplibs_check_method=pass_all ;; solaris*) lt_cv_deplibs_check_method=pass_all ;; sysv4 | sysv4.3*) case $host_vendor in motorola) lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ;; ncr) lt_cv_deplibs_check_method=pass_all ;; sequent) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;; sni) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" lt_cv_file_magic_test_file=/lib/libc.so ;; siemens) lt_cv_deplibs_check_method=pass_all ;; pc) lt_cv_deplibs_check_method=pass_all ;; esac ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) lt_cv_deplibs_check_method=pass_all ;; esac ]) file_magic_cmd=$lt_cv_file_magic_cmd deplibs_check_method=$lt_cv_deplibs_check_method test -z "$deplibs_check_method" && deplibs_check_method=unknown ])# AC_DEPLIBS_CHECK_METHOD # AC_PROG_NM # ---------- # find the pathname to a BSD-compatible name lister AC_DEFUN([AC_PROG_NM], [AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM, [if test -n "$NM"; then # Let the user override the test. lt_cv_path_NM="$NM" else lt_nm_to_check="${ac_tool_prefix}nm" if test -n "$ac_tool_prefix" && test "$build" = "$host"; then lt_nm_to_check="$lt_nm_to_check nm" fi for lt_tmp_nm in $lt_nm_to_check; do lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. tmp_nm="$ac_dir/$lt_tmp_nm" if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then # Check to see if the nm accepts a BSD-compat flag. # Adding the `sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored # Tru64's nm complains that /dev/null is an invalid object file case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in */dev/null* | *'Invalid file or object type'*) lt_cv_path_NM="$tmp_nm -B" break ;; *) case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in */dev/null*) lt_cv_path_NM="$tmp_nm -p" break ;; *) lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but continue # so that we can try to find one that supports BSD flags ;; esac ;; esac fi done IFS="$lt_save_ifs" done test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm fi]) NM="$lt_cv_path_NM" ])# AC_PROG_NM # AC_CHECK_LIBM # ------------- # check for math library AC_DEFUN([AC_CHECK_LIBM], [AC_REQUIRE([AC_CANONICAL_HOST])dnl LIBM= case $host in *-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*) # These system don't have libm, or don't need it ;; *-ncr-sysv4.3*) AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") ;; *) AC_CHECK_LIB(m, cos, LIBM="-lm") ;; esac ])# AC_CHECK_LIBM # AC_LIBLTDL_CONVENIENCE([DIRECTORY]) # ----------------------------------- # sets LIBLTDL to the link flags for the libltdl convenience library and # LTDLINCL to the include flags for the libltdl header and adds # --enable-ltdl-convenience to the configure arguments. Note that # AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided, # it is assumed to be `libltdl'. LIBLTDL will be prefixed with # '${top_builddir}/' and LTDLINCL will be prefixed with '${top_srcdir}/' # (note the single quotes!). If your package is not flat and you're not # using automake, define top_builddir and top_srcdir appropriately in # the Makefiles. AC_DEFUN([AC_LIBLTDL_CONVENIENCE], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl case $enable_ltdl_convenience in no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; "") enable_ltdl_convenience=yes ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; esac LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) # For backwards non-gettext consistent compatibility... INCLTDL="$LTDLINCL" ])# AC_LIBLTDL_CONVENIENCE # AC_LIBLTDL_INSTALLABLE([DIRECTORY]) # ----------------------------------- # sets LIBLTDL to the link flags for the libltdl installable library and # LTDLINCL to the include flags for the libltdl header and adds # --enable-ltdl-install to the configure arguments. Note that # AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided, # and an installed libltdl is not found, it is assumed to be `libltdl'. # LIBLTDL will be prefixed with '${top_builddir}/'# and LTDLINCL with # '${top_srcdir}/' (note the single quotes!). If your package is not # flat and you're not using automake, define top_builddir and top_srcdir # appropriately in the Makefiles. # In the future, this macro may have to be called after AC_PROG_LIBTOOL. AC_DEFUN([AC_LIBLTDL_INSTALLABLE], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_CHECK_LIB(ltdl, lt_dlinit, [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], [if test x"$enable_ltdl_install" = xno; then AC_MSG_WARN([libltdl not installed, but installation disabled]) else enable_ltdl_install=yes fi ]) if test x"$enable_ltdl_install" = x"yes"; then ac_configure_args="$ac_configure_args --enable-ltdl-install" LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) else ac_configure_args="$ac_configure_args --enable-ltdl-install=no" LIBLTDL="-lltdl" LTDLINCL= fi # For backwards non-gettext consistent compatibility... INCLTDL="$LTDLINCL" ])# AC_LIBLTDL_INSTALLABLE # AC_LIBTOOL_CXX # -------------- # enable support for C++ libraries AC_DEFUN([AC_LIBTOOL_CXX], [AC_REQUIRE([_LT_AC_LANG_CXX]) ])# AC_LIBTOOL_CXX # _LT_AC_LANG_CXX # --------------- AC_DEFUN([_LT_AC_LANG_CXX], [AC_REQUIRE([AC_PROG_CXX]) AC_REQUIRE([_LT_AC_PROG_CXXCPP]) _LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX]) ])# _LT_AC_LANG_CXX # _LT_AC_PROG_CXXCPP # ------------------ AC_DEFUN([_LT_AC_PROG_CXXCPP], [ AC_REQUIRE([AC_PROG_CXX]) if test -n "$CXX" && ( test "X$CXX" != "Xno" && ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || (test "X$CXX" != "Xg++"))) ; then AC_PROG_CXXCPP fi ])# _LT_AC_PROG_CXXCPP # AC_LIBTOOL_F77 # -------------- # enable support for Fortran 77 libraries AC_DEFUN([AC_LIBTOOL_F77], [AC_REQUIRE([_LT_AC_LANG_F77]) ])# AC_LIBTOOL_F77 # _LT_AC_LANG_F77 # --------------- AC_DEFUN([_LT_AC_LANG_F77], [AC_REQUIRE([AC_PROG_F77]) _LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77]) ])# _LT_AC_LANG_F77 # AC_LIBTOOL_GCJ # -------------- # enable support for GCJ libraries AC_DEFUN([AC_LIBTOOL_GCJ], [AC_REQUIRE([_LT_AC_LANG_GCJ]) ])# AC_LIBTOOL_GCJ # _LT_AC_LANG_GCJ # --------------- AC_DEFUN([_LT_AC_LANG_GCJ], [AC_PROVIDE_IFELSE([AC_PROG_GCJ],[], [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[], [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[], [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])], [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])], [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])]) _LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ]) ])# _LT_AC_LANG_GCJ # AC_LIBTOOL_RC # ------------- # enable support for Windows resource files AC_DEFUN([AC_LIBTOOL_RC], [AC_REQUIRE([LT_AC_PROG_RC]) _LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC]) ])# AC_LIBTOOL_RC # AC_LIBTOOL_LANG_C_CONFIG # ------------------------ # Ensure that the configuration vars for the C compiler are # suitably defined. Those variables are subsequently used by # AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG]) AC_DEFUN([_LT_AC_LANG_C_CONFIG], [lt_save_CC="$CC" AC_LANG_PUSH(C) # Source file extension for C test sources. ac_ext=c # Object file extension for compiled C test sources. objext=o _LT_AC_TAGVAR(objext, $1)=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;" # Code to be used in simple link tests lt_simple_link_test_code='int main(){return(0);}' _LT_AC_SYS_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1) AC_LIBTOOL_PROG_COMPILER_PIC($1) AC_LIBTOOL_PROG_CC_C_O($1) AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) AC_LIBTOOL_PROG_LD_SHLIBS($1) AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) AC_LIBTOOL_SYS_LIB_STRIP AC_LIBTOOL_DLOPEN_SELF # Report which library types will actually be built AC_MSG_CHECKING([if libtool supports shared libraries]) AC_MSG_RESULT([$can_build_shared]) AC_MSG_CHECKING([whether to build shared libraries]) test "$can_build_shared" = "no" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix[[4-9]]*) if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then test "$enable_shared" = yes && enable_static=no fi ;; esac AC_MSG_RESULT([$enable_shared]) AC_MSG_CHECKING([whether to build static libraries]) # Make sure either enable_shared or enable_static is yes. test "$enable_shared" = yes || enable_static=yes AC_MSG_RESULT([$enable_static]) AC_LIBTOOL_CONFIG($1) AC_LANG_POP CC="$lt_save_CC" ])# AC_LIBTOOL_LANG_C_CONFIG # AC_LIBTOOL_LANG_CXX_CONFIG # -------------------------- # Ensure that the configuration vars for the C compiler are # suitably defined. Those variables are subsequently used by # AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)]) AC_DEFUN([_LT_AC_LANG_CXX_CONFIG], [AC_LANG_PUSH(C++) AC_REQUIRE([AC_PROG_CXX]) AC_REQUIRE([_LT_AC_PROG_CXXCPP]) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no _LT_AC_TAGVAR(allow_undefined_flag, $1)= _LT_AC_TAGVAR(always_export_symbols, $1)=no _LT_AC_TAGVAR(archive_expsym_cmds, $1)= _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= _LT_AC_TAGVAR(hardcode_direct, $1)=no _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= _LT_AC_TAGVAR(hardcode_minus_L, $1)=no _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported _LT_AC_TAGVAR(hardcode_automatic, $1)=no _LT_AC_TAGVAR(module_cmds, $1)= _LT_AC_TAGVAR(module_expsym_cmds, $1)= _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown _LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds _LT_AC_TAGVAR(no_undefined_flag, $1)= _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no # Dependencies to place before and after the object being linked: _LT_AC_TAGVAR(predep_objects, $1)= _LT_AC_TAGVAR(postdep_objects, $1)= _LT_AC_TAGVAR(predeps, $1)= _LT_AC_TAGVAR(postdeps, $1)= _LT_AC_TAGVAR(compiler_lib_search_path, $1)= _LT_AC_TAGVAR(compiler_lib_search_dirs, $1)= # Source file extension for C++ test sources. ac_ext=cpp # Object file extension for compiled C++ test sources. objext=o _LT_AC_TAGVAR(objext, $1)=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;" # Code to be used in simple link tests lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }' # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_AC_SYS_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC=$CC lt_save_LD=$LD lt_save_GCC=$GCC GCC=$GXX lt_save_with_gnu_ld=$with_gnu_ld lt_save_path_LD=$lt_cv_path_LD if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx else $as_unset lt_cv_prog_gnu_ld fi if test -n "${lt_cv_path_LDCXX+set}"; then lt_cv_path_LD=$lt_cv_path_LDCXX else $as_unset lt_cv_path_LD fi test -z "${LDCXX+set}" || LD=$LDCXX CC=${CXX-"c++"} compiler=$CC _LT_AC_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) # We don't want -fno-exception wen compiling C++ code, so set the # no_builtin_flag separately if test "$GXX" = yes; then _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' else _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= fi if test "$GXX" = yes; then # Set up default GNU C++ configuration AC_PROG_LD # Check if GNU C++ uses GNU ld as the underlying linker, since the # archiving commands below assume that GNU ld is being used. if test "$with_gnu_ld" = yes; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' # If archive_cmds runs LD, not CC, wlarc should be empty # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to # investigate it a little bit more. (MM) wlarc='${wl}' # ancient GNU ld didn't support --whole-archive et. al. if eval "`$CC -print-prog-name=ld` --help 2>&1" | \ grep 'no-whole-archive' > /dev/null; then _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= fi else with_gnu_ld=no wlarc= # A generic and very simple default shared library creation # command for GNU C++ for the case where it uses the native # linker, instead of GNU ld. If possible, this setting should # overridden to take advantage of the native linker features on # the platform it is being used on. _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' fi # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' else GXX=no with_gnu_ld=no wlarc= fi # PORTME: fill in a description of your system's C++ link characteristics AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) _LT_AC_TAGVAR(ld_shlibs, $1)=yes case $host_os in aix3*) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; aix[[4-9]]*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag="" else aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # need to do runtime linking. case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) for ld_flag in $LDFLAGS; do case $ld_flag in *-brtl*) aix_use_runtimelinking=yes break ;; esac done ;; esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. _LT_AC_TAGVAR(archive_cmds, $1)='' _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_AC_TAGVAR(link_all_deplibs, $1)=yes if test "$GXX" = yes; then case $host_os in aix4.[[012]]|aix4.[[012]].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && \ strings "$collect2name" | grep resolve_lib_name >/dev/null then # We have reworked collect2 : else # We have old collect2 _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= fi ;; esac shared_flag='-shared' if test "$aix_use_runtimelinking" = yes; then shared_flag="$shared_flag "'${wl}-G' fi else # not using gcc if test "$host_cpu" = ia64; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' fi fi fi # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to export. _LT_AC_TAGVAR(always_export_symbols, $1)=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' # Determine the default libpath from the value encoded in an empty executable. _LT_AC_SYS_LIBPATH_AIX _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an empty executable. _LT_AC_SYS_LIBPATH_AIX _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' # Exported symbols can be pulled into shared objects from archives _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience' _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes # This is similar to how AIX traditionally builds its shared libraries. _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; beos*) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; chorus*) case $cc_basename in *) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; esac ;; cygwin* | mingw* | pw32*) # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, # as there is no search path for DLLs. _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_AC_TAGVAR(always_export_symbols, $1)=no _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then cp $export_symbols $output_objdir/$soname.def; else echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; darwin* | rhapsody*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no _LT_AC_TAGVAR(hardcode_direct, $1)=no _LT_AC_TAGVAR(hardcode_automatic, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='' _LT_AC_TAGVAR(link_all_deplibs, $1)=yes _LT_AC_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined" if test "$GXX" = yes ; then output_verbose_link_cmd='echo' _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" _LT_AC_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" _LT_AC_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" if test "$lt_cv_apple_cc_single_mod" != "yes"; then _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" fi else case $cc_basename in xlc*) output_verbose_link_cmd='echo' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring' _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ;; *) _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; esac fi ;; dgux*) case $cc_basename in ec++*) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; ghcx*) # Green Hills C++ Compiler # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; esac ;; freebsd[[12]]*) # C++ shared libraries reported to be fairly broken before switch to ELF _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; freebsd-elf*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;; freebsd* | dragonfly*) # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF # conventions _LT_AC_TAGVAR(ld_shlibs, $1)=yes ;; gnu*) ;; hpux9*) _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, # but as the default # location of the library. case $cc_basename in CC*) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; aCC*) _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[[-]]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ;; *) if test "$GXX" = yes; then _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; hpux10*|hpux11*) if test $with_gnu_ld = no; then _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: case $host_cpu in hppa*64*|ia64*) ;; *) _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ;; esac fi case $host_cpu in hppa*64*|ia64*) _LT_AC_TAGVAR(hardcode_direct, $1)=no _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, # but as the default # location of the library. ;; esac case $cc_basename in CC*) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; aCC*) case $host_cpu in hppa*64*) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; ia64*) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ;; *) if test "$GXX" = yes; then if test $with_gnu_ld = no; then case $host_cpu in hppa*64*) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; ia64*) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac fi else # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; interix[[3-9]]*) _LT_AC_TAGVAR(hardcode_direct, $1)=no _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; irix5* | irix6*) case $cc_basename in CC*) # SGI C++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' # Archives containing C++ object files must be created using # "CC -ar", where "CC" is the IRIX C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' ;; *) if test "$GXX" = yes; then if test "$with_gnu_ld" = no; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib' fi fi _LT_AC_TAGVAR(link_all_deplibs, $1)=yes ;; esac _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: ;; linux* | k*bsd*-gnu) case $cc_basename in KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir' _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' # Archives containing C++ object files must be created using # "CC -Bstatic", where "CC" is the KAI C++ compiler. _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; icpc*) # Intel C++ with_gnu_ld=yes # version 8.0 and above of icpc choke on multiply defined symbols # if we add $predep_objects and $postdep_objects, however 7.1 and # earlier do not add the objects themselves. case `$CC -V 2>&1` in *"Version 7."*) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ;; *) # Version 8.0 or newer tmp_idyn= case $host_cpu in ia64*) tmp_idyn=' -i_dynamic';; esac _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ;; esac _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' ;; pgCC* | pgcpp*) # Portland Group C++ compiler _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' ;; cxx*) # Compaq C++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' runpath_var=LD_RUN_PATH _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' # Not sure whether something based on # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 # would be better. output_verbose_link_cmd='echo' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' ;; esac ;; esac ;; lynxos*) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; m88k*) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; mvs*) case $cc_basename in cxx*) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; esac ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' wlarc= _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no fi # Workaround some broken pre-1.5 toolchains output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' ;; openbsd2*) # C++ shared libraries are fairly broken _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; openbsd*) if test -f /usr/libexec/ld.so; then _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' fi output_verbose_link_cmd='echo' else _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; osf3*) case $cc_basename in KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: # Archives containing C++ object files must be created using # "CC -Bstatic", where "CC" is the KAI C++ compiler. _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; RCC*) # Rational C++ 2.4.1 # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; cxx*) _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ;; *) if test "$GXX" = yes && test "$with_gnu_ld" = no; then _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' else # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; osf4* | osf5*) case $cc_basename in KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: # Archives containing C++ object files must be created using # the KAI C++ compiler. _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;; RCC*) # Rational C++ 2.4.1 # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; cxx*) _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ echo "-hidden">> $lib.exp~ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~ $rm $lib.exp' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ;; *) if test "$GXX" = yes && test "$with_gnu_ld" = no; then _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' else # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; psos*) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; sunos4*) case $cc_basename in CC*) # Sun C++ 4.x # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; lcc*) # Lucid # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; esac ;; solaris*) case $cc_basename in CC*) # Sun C++ 4.2, 5.x and Centerline C++ _LT_AC_TAGVAR(archive_cmds_need_lc,$1)=yes _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no case $host_os in solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; *) # The compiler driver will combine and reorder linker options, # but understands `-z linker_flag'. # Supported since Solaris 2.6 (maybe 2.5.1?) _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;; esac _LT_AC_TAGVAR(link_all_deplibs, $1)=yes output_verbose_link_cmd='echo' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' ;; gcx*) # Green Hills C++ Compiler _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' # The C++ compiler must be used to create the archive. _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' ;; *) # GNU C++ compiler with Solaris linker if test "$GXX" = yes && test "$with_gnu_ld" = no; then _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' if $CC --version | grep -v '^2\.7' > /dev/null; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" else # g++ 2.7 appears to require `-G' NOT `-shared' on this # platform. _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" fi _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' case $host_os in solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; *) _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' ;; esac fi ;; esac ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no runpath_var='LD_RUN_PATH' case $cc_basename in CC*) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; *) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; esac ;; sysv5* | sco3.2v5* | sco5v6*) # Note: We can NOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. # For security reasons, it is highly recommended that you always # use absolute paths for naming shared libraries, and exclude the # DT_RUNPATH tag from executables and libraries. But doing so # requires that you compile everything twice, which is a pain. # So that behaviour is only enabled if SCOABSPATH is set to a # non-empty value in the environment. Most likely only useful for # creating official distributions of packages. # This is a hack until libtool officially supports absolute path # names for shared libraries. _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_AC_TAGVAR(link_all_deplibs, $1)=yes _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' runpath_var='LD_RUN_PATH' case $cc_basename in CC*) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; *) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; esac ;; tandem*) case $cc_basename in NCC*) # NonStop-UX NCC 3.20 # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; esac ;; vxworks*) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; esac AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no _LT_AC_TAGVAR(GCC, $1)="$GXX" _LT_AC_TAGVAR(LD, $1)="$LD" AC_LIBTOOL_POSTDEP_PREDEP($1) AC_LIBTOOL_PROG_COMPILER_PIC($1) AC_LIBTOOL_PROG_CC_C_O($1) AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) AC_LIBTOOL_PROG_LD_SHLIBS($1) AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) AC_LIBTOOL_CONFIG($1) AC_LANG_POP CC=$lt_save_CC LDCXX=$LD LD=$lt_save_LD GCC=$lt_save_GCC with_gnu_ldcxx=$with_gnu_ld with_gnu_ld=$lt_save_with_gnu_ld lt_cv_path_LDCXX=$lt_cv_path_LD lt_cv_path_LD=$lt_save_path_LD lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld ])# AC_LIBTOOL_LANG_CXX_CONFIG # AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME]) # ------------------------------------ # Figure out "hidden" library dependencies from verbose # compiler output when linking a shared library. # Parse the compiler output and extract the necessary # objects, libraries and library flags. AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP], [AC_REQUIRE([LT_AC_PROG_SED])dnl dnl we can't use the lt_simple_compile_test_code here, dnl because it contains code intended for an executable, dnl not a library. It's possible we should let each dnl tag define a new lt_????_link_test_code variable, dnl but it's only used here... ifelse([$1],[],[cat > conftest.$ac_ext < conftest.$ac_ext < conftest.$ac_ext < conftest.$ac_ext <&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 # # The more standards-conforming stlport4 library is # incompatible with the Cstd library. Avoid specifying # it if it's in CXXFLAGS. Ignore libCrun as # -library=stlport4 depends on it. case " $CXX $CXXFLAGS " in *" -library=stlport4 "*) solaris_use_stlport4=yes ;; esac if test "$solaris_use_stlport4" != yes; then _LT_AC_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' fi ;; esac ;; solaris*) case $cc_basename in CC*) # The more standards-conforming stlport4 library is # incompatible with the Cstd library. Avoid specifying # it if it's in CXXFLAGS. Ignore libCrun as # -library=stlport4 depends on it. case " $CXX $CXXFLAGS " in *" -library=stlport4 "*) solaris_use_stlport4=yes ;; esac # Adding this requires a known-good setup of shared libraries for # Sun compiler versions before 5.6, else PIC objects from an old # archive will be linked into the output, leading to subtle bugs. if test "$solaris_use_stlport4" != yes; then _LT_AC_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' fi ;; esac ;; esac ]) case " $_LT_AC_TAGVAR(postdeps, $1) " in *" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;; esac ])# AC_LIBTOOL_POSTDEP_PREDEP # AC_LIBTOOL_LANG_F77_CONFIG # -------------------------- # Ensure that the configuration vars for the C compiler are # suitably defined. Those variables are subsequently used by # AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG], [_LT_AC_LANG_F77_CONFIG(F77)]) AC_DEFUN([_LT_AC_LANG_F77_CONFIG], [AC_REQUIRE([AC_PROG_F77]) AC_LANG_PUSH(Fortran 77) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no _LT_AC_TAGVAR(allow_undefined_flag, $1)= _LT_AC_TAGVAR(always_export_symbols, $1)=no _LT_AC_TAGVAR(archive_expsym_cmds, $1)= _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= _LT_AC_TAGVAR(hardcode_direct, $1)=no _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= _LT_AC_TAGVAR(hardcode_minus_L, $1)=no _LT_AC_TAGVAR(hardcode_automatic, $1)=no _LT_AC_TAGVAR(module_cmds, $1)= _LT_AC_TAGVAR(module_expsym_cmds, $1)= _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown _LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds _LT_AC_TAGVAR(no_undefined_flag, $1)= _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no # Source file extension for f77 test sources. ac_ext=f # Object file extension for compiled f77 test sources. objext=o _LT_AC_TAGVAR(objext, $1)=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="\ subroutine t return end " # Code to be used in simple link tests lt_simple_link_test_code="\ program t end " # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_AC_SYS_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC="$CC" CC=${F77-"f77"} compiler=$CC _LT_AC_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) AC_MSG_CHECKING([if libtool supports shared libraries]) AC_MSG_RESULT([$can_build_shared]) AC_MSG_CHECKING([whether to build shared libraries]) test "$can_build_shared" = "no" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix[[4-9]]*) if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then test "$enable_shared" = yes && enable_static=no fi ;; esac AC_MSG_RESULT([$enable_shared]) AC_MSG_CHECKING([whether to build static libraries]) # Make sure either enable_shared or enable_static is yes. test "$enable_shared" = yes || enable_static=yes AC_MSG_RESULT([$enable_static]) _LT_AC_TAGVAR(GCC, $1)="$G77" _LT_AC_TAGVAR(LD, $1)="$LD" AC_LIBTOOL_PROG_COMPILER_PIC($1) AC_LIBTOOL_PROG_CC_C_O($1) AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) AC_LIBTOOL_PROG_LD_SHLIBS($1) AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) AC_LIBTOOL_CONFIG($1) AC_LANG_POP CC="$lt_save_CC" ])# AC_LIBTOOL_LANG_F77_CONFIG # AC_LIBTOOL_LANG_GCJ_CONFIG # -------------------------- # Ensure that the configuration vars for the C compiler are # suitably defined. Those variables are subsequently used by # AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)]) AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG], [AC_LANG_SAVE # Source file extension for Java test sources. ac_ext=java # Object file extension for compiled Java test sources. objext=o _LT_AC_TAGVAR(objext, $1)=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="class foo {}" # Code to be used in simple link tests lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }' # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_AC_SYS_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC="$CC" CC=${GCJ-"gcj"} compiler=$CC _LT_AC_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) # GCJ did not exist at the time GCC didn't implicitly link libc in. _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no _LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1) AC_LIBTOOL_PROG_COMPILER_PIC($1) AC_LIBTOOL_PROG_CC_C_O($1) AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) AC_LIBTOOL_PROG_LD_SHLIBS($1) AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) AC_LIBTOOL_CONFIG($1) AC_LANG_RESTORE CC="$lt_save_CC" ])# AC_LIBTOOL_LANG_GCJ_CONFIG # AC_LIBTOOL_LANG_RC_CONFIG # ------------------------- # Ensure that the configuration vars for the Windows resource compiler are # suitably defined. Those variables are subsequently used by # AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)]) AC_DEFUN([_LT_AC_LANG_RC_CONFIG], [AC_LANG_SAVE # Source file extension for RC test sources. ac_ext=rc # Object file extension for compiled RC test sources. objext=o _LT_AC_TAGVAR(objext, $1)=$objext # Code to be used in simple compile tests lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' # Code to be used in simple link tests lt_simple_link_test_code="$lt_simple_compile_test_code" # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_AC_SYS_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC="$CC" CC=${RC-"windres"} compiler=$CC _LT_AC_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes AC_LIBTOOL_CONFIG($1) AC_LANG_RESTORE CC="$lt_save_CC" ])# AC_LIBTOOL_LANG_RC_CONFIG # AC_LIBTOOL_CONFIG([TAGNAME]) # ---------------------------- # If TAGNAME is not passed, then create an initial libtool script # with a default configuration from the untagged config vars. Otherwise # add code to config.status for appending the configuration named by # TAGNAME from the matching tagged config vars. AC_DEFUN([AC_LIBTOOL_CONFIG], [# The else clause should only fire when bootstrapping the # libtool distribution, otherwise you forgot to ship ltmain.sh # with your package, and you will get complaints that there are # no rules to generate ltmain.sh. if test -f "$ltmain"; then # See if we are running on zsh, and set the options which allow our commands through # without removal of \ escapes. if test -n "${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi # Now quote all the things that may contain metacharacters while being # careful not to overquote the AC_SUBSTed values. We take copies of the # variables and quote the copies for generation of the libtool script. for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ SED SHELL STRIP \ libname_spec library_names_spec soname_spec extract_expsyms_cmds \ old_striplib striplib file_magic_cmd finish_cmds finish_eval \ deplibs_check_method reload_flag reload_cmds need_locks \ lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ lt_cv_sys_global_symbol_to_c_name_address \ sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ old_postinstall_cmds old_postuninstall_cmds \ _LT_AC_TAGVAR(compiler, $1) \ _LT_AC_TAGVAR(CC, $1) \ _LT_AC_TAGVAR(LD, $1) \ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \ _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \ _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \ _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \ _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \ _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \ _LT_AC_TAGVAR(old_archive_cmds, $1) \ _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \ _LT_AC_TAGVAR(predep_objects, $1) \ _LT_AC_TAGVAR(postdep_objects, $1) \ _LT_AC_TAGVAR(predeps, $1) \ _LT_AC_TAGVAR(postdeps, $1) \ _LT_AC_TAGVAR(compiler_lib_search_path, $1) \ _LT_AC_TAGVAR(compiler_lib_search_dirs, $1) \ _LT_AC_TAGVAR(archive_cmds, $1) \ _LT_AC_TAGVAR(archive_expsym_cmds, $1) \ _LT_AC_TAGVAR(postinstall_cmds, $1) \ _LT_AC_TAGVAR(postuninstall_cmds, $1) \ _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \ _LT_AC_TAGVAR(allow_undefined_flag, $1) \ _LT_AC_TAGVAR(no_undefined_flag, $1) \ _LT_AC_TAGVAR(export_symbols_cmds, $1) \ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \ _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \ _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \ _LT_AC_TAGVAR(hardcode_automatic, $1) \ _LT_AC_TAGVAR(module_cmds, $1) \ _LT_AC_TAGVAR(module_expsym_cmds, $1) \ _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \ _LT_AC_TAGVAR(fix_srcfile_path, $1) \ _LT_AC_TAGVAR(exclude_expsyms, $1) \ _LT_AC_TAGVAR(include_expsyms, $1); do case $var in _LT_AC_TAGVAR(old_archive_cmds, $1) | \ _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \ _LT_AC_TAGVAR(archive_cmds, $1) | \ _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \ _LT_AC_TAGVAR(module_cmds, $1) | \ _LT_AC_TAGVAR(module_expsym_cmds, $1) | \ _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \ _LT_AC_TAGVAR(export_symbols_cmds, $1) | \ extract_expsyms_cmds | reload_cmds | finish_cmds | \ postinstall_cmds | postuninstall_cmds | \ old_postinstall_cmds | old_postuninstall_cmds | \ sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) # Double-quote double-evaled strings. eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" ;; *) eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" ;; esac done case $lt_echo in *'\[$]0 --fallback-echo"') lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'` ;; esac ifelse([$1], [], [cfgfile="${ofile}T" trap "$rm \"$cfgfile\"; exit 1" 1 2 15 $rm -f "$cfgfile" AC_MSG_NOTICE([creating $ofile])], [cfgfile="$ofile"]) cat <<__EOF__ >> "$cfgfile" ifelse([$1], [], [#! $SHELL # `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services. # Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) # NOTE: Changes made to this file will be lost: look at ltmain.sh. # # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 # Free Software Foundation, Inc. # # This file is part of GNU Libtool: # Originally by Gordon Matzigkeit , 1996 # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # A sed program that does not truncate output. SED=$lt_SED # Sed that helps us avoid accidentally triggering echo(1) options like -n. Xsed="$SED -e 1s/^X//" # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH # The names of the tagged configurations supported by this script. available_tags= # ### BEGIN LIBTOOL CONFIG], [# ### BEGIN LIBTOOL TAG CONFIG: $tagname]) # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: # Shell to use when invoking shell scripts. SHELL=$lt_SHELL # Whether or not to build shared libraries. build_libtool_libs=$enable_shared # Whether or not to build static libraries. build_old_libs=$enable_static # Whether or not to add -lc for building shared libraries. build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1) # Whether or not to disallow shared libs when runtime libs are static allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) # Whether or not to optimize for fast installation. fast_install=$enable_fast_install # The host system. host_alias=$host_alias host=$host host_os=$host_os # The build system. build_alias=$build_alias build=$build build_os=$build_os # An echo program that does not interpret backslashes. echo=$lt_echo # The archiver. AR=$lt_AR AR_FLAGS=$lt_AR_FLAGS # A C compiler. LTCC=$lt_LTCC # LTCC compiler flags. LTCFLAGS=$lt_LTCFLAGS # A language-specific compiler. CC=$lt_[]_LT_AC_TAGVAR(compiler, $1) # Is the compiler the GNU C compiler? with_gcc=$_LT_AC_TAGVAR(GCC, $1) # An ERE matcher. EGREP=$lt_EGREP # The linker used to build libraries. LD=$lt_[]_LT_AC_TAGVAR(LD, $1) # Whether we need hard or soft links. LN_S=$lt_LN_S # A BSD-compatible nm program. NM=$lt_NM # A symbol stripping program STRIP=$lt_STRIP # Used to examine libraries when file_magic_cmd begins "file" MAGIC_CMD=$MAGIC_CMD # Used on cygwin: DLL creation program. DLLTOOL="$DLLTOOL" # Used on cygwin: object dumper. OBJDUMP="$OBJDUMP" # Used on cygwin: assembler. AS="$AS" # The name of the directory that contains temporary libtool files. objdir=$objdir # How to create reloadable object files. reload_flag=$lt_reload_flag reload_cmds=$lt_reload_cmds # How to pass a linker flag through the compiler. wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) # Object file suffix (normally "o"). objext="$ac_objext" # Old archive suffix (normally "a"). libext="$libext" # Shared library suffix (normally ".so"). shrext_cmds='$shrext_cmds' # Executable file suffix (normally ""). exeext="$exeext" # Additional compiler flags for building library objects. pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) pic_mode=$pic_mode # What is the maximum length of a command? max_cmd_len=$lt_cv_sys_max_cmd_len # Does compiler simultaneously support -c and -o options? compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) # Must we lock files when doing compilation? need_locks=$lt_need_locks # Do we need the lib prefix for modules? need_lib_prefix=$need_lib_prefix # Do we need a version for libraries? need_version=$need_version # Whether dlopen is supported. dlopen_support=$enable_dlopen # Whether dlopen of programs is supported. dlopen_self=$enable_dlopen_self # Whether dlopen of statically linked programs is supported. dlopen_self_static=$enable_dlopen_self_static # Compiler flag to prevent dynamic linking. link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1) # Compiler flag to turn off builtin functions. no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) # Compiler flag to allow reflexive dlopens. export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1) # Compiler flag to generate shared objects directly from archives. whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1) # Compiler flag to generate thread-safe objects. thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1) # Library versioning type. version_type=$version_type # Format of library name prefix. libname_spec=$lt_libname_spec # List of archive names. First name is the real one, the rest are links. # The last name is the one that the linker finds with -lNAME. library_names_spec=$lt_library_names_spec # The coded name of the library, if different from the real name. soname_spec=$lt_soname_spec # Commands used to build and install an old-style archive. RANLIB=$lt_RANLIB old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1) old_postinstall_cmds=$lt_old_postinstall_cmds old_postuninstall_cmds=$lt_old_postuninstall_cmds # Create an old-style archive from a shared archive. old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1) # Create a temporary old-style archive to link instead of a shared archive. old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) # Commands used to build and install a shared archive. archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1) archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1) postinstall_cmds=$lt_postinstall_cmds postuninstall_cmds=$lt_postuninstall_cmds # Commands used to build a loadable module (assumed same as above if empty) module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1) module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1) # Commands to strip libraries. old_striplib=$lt_old_striplib striplib=$lt_striplib # Dependencies to place before the objects being linked to create a # shared library. predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1) # Dependencies to place after the objects being linked to create a # shared library. postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1) # Dependencies to place before the objects being linked to create a # shared library. predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1) # Dependencies to place after the objects being linked to create a # shared library. postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1) # The directories searched by this compiler when creating a shared # library compiler_lib_search_dirs=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_dirs, $1) # The library search path used internally by the compiler when linking # a shared library. compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1) # Method to check whether dependent libraries are shared objects. deplibs_check_method=$lt_deplibs_check_method # Command to use when deplibs_check_method == file_magic. file_magic_cmd=$lt_file_magic_cmd # Flag that allows shared libraries with undefined symbols to be built. allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1) # Flag that forces no undefined symbols. no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1) # Commands used to finish a libtool library installation in a directory. finish_cmds=$lt_finish_cmds # Same as above, but a single script fragment to be evaled but not shown. finish_eval=$lt_finish_eval # Take the output of nm and produce a listing of raw symbols and C names. global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe # Transform the output of nm in a proper C declaration global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl # Transform the output of nm in a C name address pair global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. runpath_var=$runpath_var # This is the shared library path variable. shlibpath_var=$shlibpath_var # Is shlibpath searched before the hard-coded library search path? shlibpath_overrides_runpath=$shlibpath_overrides_runpath # How to hardcode a shared library path into an executable. hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1) # Whether we should hardcode library paths into libraries. hardcode_into_libs=$hardcode_into_libs # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1) # Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the # resulting binary. hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1) # Set to yes if using the -LDIR flag during linking hardcodes DIR into the # resulting binary. hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1) # Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into # the resulting binary. hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1) # Set to yes if building a shared library automatically hardcodes DIR into the library # and all subsequent libraries and executables linked against it. hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1) # Variables whose values should be saved in libtool wrapper scripts and # restored at relink time. variables_saved_for_relink="$variables_saved_for_relink" # Whether libtool must link a program against all its dependency libraries. link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1) # Compile-time system search path for libraries sys_lib_search_path_spec=$lt_sys_lib_search_path_spec # Run-time system search path for libraries sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec # Fix the shell variable \$srcfile for the compiler. fix_srcfile_path=$lt_fix_srcfile_path # Set to yes if exported symbols are required. always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1) # The commands to list exported symbols. export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1) # The commands to extract the exported symbol list from a shared archive. extract_expsyms_cmds=$lt_extract_expsyms_cmds # Symbols that should not be listed in the preloaded symbols. exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1) # Symbols that must always be exported. include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1) ifelse([$1],[], [# ### END LIBTOOL CONFIG], [# ### END LIBTOOL TAG CONFIG: $tagname]) __EOF__ ifelse([$1],[], [ case $host_os in aix3*) cat <<\EOF >> "$cfgfile" # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi EOF ;; esac # We use sed instead of cat because bash on DJGPP gets confused if # if finds mixed CR/LF and LF-only lines. Since sed operates in # text mode, it properly converts lines to CR/LF. This bash problem # is reportedly fixed, but why not run on old versions too? sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1) mv -f "$cfgfile" "$ofile" || \ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") chmod +x "$ofile" ]) else # If there is no Makefile yet, we rely on a make rule to execute # `config.status --recheck' to rerun these tests and create the # libtool script then. ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` if test -f "$ltmain_in"; then test -f Makefile && make "$ltmain" fi fi ])# AC_LIBTOOL_CONFIG # AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME]) # ------------------------------------------- AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= if test "$GCC" = yes; then _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], lt_cv_prog_compiler_rtti_exceptions, [-fno-rtti -fno-exceptions], [], [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) fi ])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE # --------------------------------- AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_REQUIRE([AC_CANONICAL_HOST]) AC_REQUIRE([LT_AC_PROG_SED]) AC_REQUIRE([AC_PROG_NM]) AC_REQUIRE([AC_OBJEXT]) # Check for command to grab the raw symbol name followed by C symbol from nm. AC_MSG_CHECKING([command to parse $NM output from $compiler object]) AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], [ # These are sane defaults that work on at least a few old systems. # [They come from Ultrix. What could be older than Ultrix?!! ;)] # Character class describing NM global symbol codes. symcode='[[BCDEGRST]]' # Regexp to match symbols that can be accessed directly from C. sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' # Transform an extracted symbol line into a proper C declaration lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'" # Transform an extracted symbol line into symbol name and symbol address lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" # Define system-specific variables. case $host_os in aix*) symcode='[[BCDT]]' ;; cygwin* | mingw* | pw32*) symcode='[[ABCDGISTW]]' ;; hpux*) # Its linker distinguishes data from code symbols if test "$host_cpu" = ia64; then symcode='[[ABCDEGRST]]' fi lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" ;; linux* | k*bsd*-gnu) if test "$host_cpu" = ia64; then symcode='[[ABCDGIRSTW]]' lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" fi ;; irix* | nonstopux*) symcode='[[BCDEGRST]]' ;; osf*) symcode='[[BCDEGQRST]]' ;; solaris*) symcode='[[BDRT]]' ;; sco3.2v5*) symcode='[[DT]]' ;; sysv4.2uw2*) symcode='[[DT]]' ;; sysv5* | sco5v6* | unixware* | OpenUNIX*) symcode='[[ABDT]]' ;; sysv4) symcode='[[DFNSTU]]' ;; esac # Handle CRLF in mingw tool chain opt_cr= case $build_os in mingw*) opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp ;; esac # If we're using GNU nm, then use its standard symbol codes. case `$NM -V 2>&1` in *GNU* | *'with BFD'*) symcode='[[ABCDGIRSTW]]' ;; esac # Try without a prefix undercore, then with it. for ac_symprfx in "" "_"; do # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. symxfrm="\\1 $ac_symprfx\\2 \\2" # Write the raw and C identifiers. lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" # Check to see that the pipe works correctly. pipe_works=no rm -f conftest* cat > conftest.$ac_ext < $nlist) && test -s "$nlist"; then # Try sorting and uniquifying the output. if sort "$nlist" | uniq > "$nlist"T; then mv -f "$nlist"T "$nlist" else rm -f "$nlist"T fi # Make sure that we snagged all the symbols we need. if grep ' nm_test_var$' "$nlist" >/dev/null; then if grep ' nm_test_func$' "$nlist" >/dev/null; then cat < conftest.$ac_ext #ifdef __cplusplus extern "C" { #endif EOF # Now generate the symbol file. eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext' cat <> conftest.$ac_ext #if defined (__STDC__) && __STDC__ # define lt_ptr_t void * #else # define lt_ptr_t char * # define const #endif /* The mapping between symbol names and symbols. */ const struct { const char *name; lt_ptr_t address; } lt_preloaded_symbols[[]] = { EOF $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext cat <<\EOF >> conftest.$ac_ext {0, (lt_ptr_t) 0} }; #ifdef __cplusplus } #endif EOF # Now try linking the two files. mv conftest.$ac_objext conftstm.$ac_objext lt_save_LIBS="$LIBS" lt_save_CFLAGS="$CFLAGS" LIBS="conftstm.$ac_objext" CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then pipe_works=yes fi LIBS="$lt_save_LIBS" CFLAGS="$lt_save_CFLAGS" else echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD fi else echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD fi else echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD fi else echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD cat conftest.$ac_ext >&5 fi rm -rf conftest* conftst* # Do not use the global_symbol_pipe unless it works. if test "$pipe_works" = yes; then break else lt_cv_sys_global_symbol_pipe= fi done ]) if test -z "$lt_cv_sys_global_symbol_pipe"; then lt_cv_sys_global_symbol_to_cdecl= fi if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then AC_MSG_RESULT(failed) else AC_MSG_RESULT(ok) fi ]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE # AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME]) # --------------------------------------- AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC], [_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)= _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= _LT_AC_TAGVAR(lt_prog_compiler_static, $1)= AC_MSG_CHECKING([for $compiler option to produce PIC]) ifelse([$1],[CXX],[ # C++ specific cases for pic, static, wl, etc. if test "$GXX" = yes; then _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' case $host_os in aix*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' fi ;; amigaos*) # FIXME: we need at least 68020 code to build shared libraries, but # adding the `-m68020' flag to GCC prevents building anything better, # like `-m68040'. _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' ;; beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; mingw* | cygwin* | os2* | pw32*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries m4_if([$1], [GCJ], [], [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' ;; *djgpp*) # DJGPP does not support shared libraries at all _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= ;; interix[[3-9]]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. # Instead, we relocate shared libraries at runtime. ;; sysv4*MP*) if test -d /usr/nec; then _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic fi ;; hpux*) # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. case $host_cpu in hppa*64*|ia64*) ;; *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac ;; *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac else case $host_os in aix[[4-9]]*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' else _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' fi ;; chorus*) case $cc_basename in cxch68*) # Green Hills C++ Compiler # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" ;; esac ;; darwin*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files case $cc_basename in xlc*) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon' _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ;; esac ;; dgux*) case $cc_basename in ec++*) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ;; ghcx*) # Green Hills C++ Compiler _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ;; *) ;; esac ;; freebsd* | dragonfly*) # FreeBSD uses GNU C++ ;; hpux9* | hpux10* | hpux11*) case $cc_basename in CC*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' if test "$host_cpu" != ia64; then _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' fi ;; aCC*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' ;; esac ;; *) ;; esac ;; interix*) # This is c89, which is MS Visual C++ (no shared libs) # Anyone wants to do a port? ;; irix5* | irix6* | nonstopux*) case $cc_basename in CC*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' # CC pic flag -KPIC is the default. ;; *) ;; esac ;; linux* | k*bsd*-gnu) case $cc_basename in KCC*) # KAI C++ Compiler _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; icpc* | ecpc*) # Intel C++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; pgCC* | pgcpp*) # Portland Group C++ compiler. _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; cxx*) # Compaq C++ # Make sure the PIC flag is empty. It appears that all Alpha # Linux and Compaq Tru64 Unix objects are PIC. _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ;; esac ;; esac ;; lynxos*) ;; m88k*) ;; mvs*) case $cc_basename in cxx*) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' ;; *) ;; esac ;; netbsd* | netbsdelf*-gnu) ;; osf3* | osf4* | osf5*) case $cc_basename in KCC*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' ;; RCC*) # Rational C++ 2.4.1 _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ;; cxx*) # Digital/Compaq C++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # Make sure the PIC flag is empty. It appears that all Alpha # Linux and Compaq Tru64 Unix objects are PIC. _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; *) ;; esac ;; psos*) ;; solaris*) case $cc_basename in CC*) # Sun C++ 4.2, 5.x and Centerline C++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ;; gcx*) # Green Hills C++ Compiler _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' ;; *) ;; esac ;; sunos4*) case $cc_basename in CC*) # Sun C++ 4.x _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; lcc*) # Lucid _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ;; *) ;; esac ;; tandem*) case $cc_basename in NCC*) # NonStop-UX NCC 3.20 _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ;; *) ;; esac ;; sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) case $cc_basename in CC*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; esac ;; vxworks*) ;; *) _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ;; esac fi ], [ if test "$GCC" = yes; then _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' case $host_os in aix*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' fi ;; amigaos*) # FIXME: we need at least 68020 code to build shared libraries, but # adding the `-m68020' flag to GCC prevents building anything better, # like `-m68040'. _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' ;; beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; mingw* | cygwin* | pw32* | os2*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries m4_if([$1], [GCJ], [], [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' ;; interix[[3-9]]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. # Instead, we relocate shared libraries at runtime. ;; msdosdjgpp*) # Just because we use GCC doesn't mean we suddenly get shared libraries # on systems that don't support them. _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no enable_shared=no ;; sysv4*MP*) if test -d /usr/nec; then _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic fi ;; hpux*) # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac ;; *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac else # PORTME Check for flag to pass linker flags through the system compiler. case $host_os in aix*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' else _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' fi ;; darwin*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files case $cc_basename in xlc*) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon' _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ;; esac ;; mingw* | cygwin* | pw32* | os2*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). m4_if([$1], [GCJ], [], [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ;; hpux9* | hpux10* | hpux11*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' ;; esac # Is there a better lt_prog_compiler_static that works with the bundled CC? _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' ;; irix5* | irix6* | nonstopux*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # PIC (with -KPIC) is the default. _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; newsos6) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; linux* | k*bsd*-gnu) case $cc_basename in icc* | ecc*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; pgcc* | pgf77* | pgf90* | pgf95*) # Portland Group compilers (*not* the Pentium gcc compiler, # which looks to be a dead project) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; ccc*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # All Alpha code is PIC. _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ;; *Sun\ F*) # Sun Fortran 8.3 passes all unrecognized flags to the linker _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='' ;; esac ;; esac ;; osf3* | osf4* | osf5*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # All OSF/1 code is PIC. _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; rdos*) _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; solaris*) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' case $cc_basename in f77* | f90* | f95*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; *) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; esac ;; sunos4*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; sysv4 | sysv4.2uw2* | sysv4.3*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; sysv4*MP*) if test -d /usr/nec ;then _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' fi ;; sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; unicos*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ;; uts4*) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; *) _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ;; esac fi ]) AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)]) # # Check to make sure the PIC flag actually works. # if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works], _LT_AC_TAGVAR(lt_cv_prog_compiler_pic_works, $1), [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [], [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in "" | " "*) ;; *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;; esac], [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) fi case $host_os in # For platforms which do not support PIC, -DPIC is meaningless: *djgpp*) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= ;; *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])" ;; esac # # Check to make sure the static flag actually works. # wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_AC_TAGVAR(lt_prog_compiler_static, $1)\" AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], _LT_AC_TAGVAR(lt_cv_prog_compiler_static_works, $1), $lt_tmp_static_flag, [], [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=]) ]) # AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME]) # ------------------------------------ # See if the linker supports building shared libraries. AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_REQUIRE([LT_AC_PROG_SED])dnl AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) ifelse([$1],[CXX],[ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' case $host_os in aix[[4-9]]*) # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm if $NM -V 2>&1 | grep 'GNU' > /dev/null; then _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' else _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' fi ;; pw32*) _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" ;; cygwin* | mingw*) _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' ;; linux* | k*bsd*-gnu) _LT_AC_TAGVAR(link_all_deplibs, $1)=no ;; *) _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ;; esac _LT_AC_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] ],[ runpath_var= _LT_AC_TAGVAR(allow_undefined_flag, $1)= _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no _LT_AC_TAGVAR(archive_cmds, $1)= _LT_AC_TAGVAR(archive_expsym_cmds, $1)= _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)= _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)= _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= _LT_AC_TAGVAR(thread_safe_flag_spec, $1)= _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= _LT_AC_TAGVAR(hardcode_direct, $1)=no _LT_AC_TAGVAR(hardcode_minus_L, $1)=no _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown _LT_AC_TAGVAR(hardcode_automatic, $1)=no _LT_AC_TAGVAR(module_cmds, $1)= _LT_AC_TAGVAR(module_expsym_cmds, $1)= _LT_AC_TAGVAR(always_export_symbols, $1)=no _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' # include_expsyms should be a list of space-separated symbols to be *always* # included in the symbol list _LT_AC_TAGVAR(include_expsyms, $1)= # exclude_expsyms can be an extended regexp of symbols to exclude # it will be wrapped by ` (' and `)$', so one must not match beginning or # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', # as well as any symbol that contains `d'. _LT_AC_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out # platforms (ab)use it in PIC code, but their linkers get confused if # the symbol is explicitly referenced. Since portable code cannot # rely on this symbol name, it's probably fine to never include it in # preloaded symbol tables. # Exclude shared library initialization/finalization symbols. dnl Note also adjust exclude_expsyms for C++ above. extract_expsyms_cmds= # Just being paranoid about ensuring that cc_basename is set. _LT_CC_BASENAME([$compiler]) case $host_os in cygwin* | mingw* | pw32*) # FIXME: the MSVC++ port hasn't been tested in a loooong time # When not using gcc, we currently assume that we are using # Microsoft Visual C++. if test "$GCC" != yes; then with_gnu_ld=no fi ;; interix*) # we just hope/assume this is gcc and not c89 (= MSVC++) with_gnu_ld=yes ;; openbsd*) with_gnu_ld=no ;; esac _LT_AC_TAGVAR(ld_shlibs, $1)=yes if test "$with_gnu_ld" = yes; then # If archive_cmds runs LD, not CC, wlarc should be empty wlarc='${wl}' # Set some defaults for GNU ld with shared library support. These # are reset later if shared libraries are not supported. Putting them # here allows them to be overridden if necessary. runpath_var=LD_RUN_PATH _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' # ancient GNU ld didn't support --whole-archive et. al. if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= fi supports_anon_versioning=no case `$LD -v 2>/dev/null` in *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... *\ 2.11.*) ;; # other 2.11 versions *) supports_anon_versioning=yes ;; esac # See if GNU ld supports shared libraries. case $host_os in aix[[3-9]]*) # On AIX/PPC, the GNU linker is very broken if test "$host_cpu" != ia64; then _LT_AC_TAGVAR(ld_shlibs, $1)=no cat <&2 *** Warning: the GNU linker, at least up to release 2.9.1, is reported *** to be unable to reliably create shared libraries on AIX. *** Therefore, libtool is disabling shared libraries support. If you *** really care for shared libraries, you may want to modify your PATH *** so that a non-GNU linker is found, and then restart. EOF fi ;; amigaos*) _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Samuel A. Falvo II reports # that the semantics of dynamic libraries on AmigaOS, at least up # to version 4, is to share data among multiple programs linked # with the same dynamic library. Since this doesn't match the # behavior of shared libraries on other platforms, we can't use # them. _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; beos*) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; cygwin* | mingw* | pw32*) # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, # as there is no search path for DLLs. _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_AC_TAGVAR(always_export_symbols, $1)=no _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then cp $export_symbols $output_objdir/$soname.def; else echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; interix[[3-9]]*) _LT_AC_TAGVAR(hardcode_direct, $1)=no _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; gnu* | linux* | k*bsd*-gnu) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then tmp_addflag= case $cc_basename,$host_cpu in pgcc*) # Portland Group C compiler _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag' ;; pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag -Mnomain' ;; ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 tmp_addflag=' -i_dynamic' ;; efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 tmp_addflag=' -i_dynamic -nofor_main' ;; ifc* | ifort*) # Intel Fortran compiler tmp_addflag=' -nofor_main' ;; esac case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' tmp_sharedflag='-G' ;; *Sun\ F*) # Sun Fortran 8.3 tmp_sharedflag='-G' ;; *) tmp_sharedflag='-shared' ;; esac _LT_AC_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' if test $supports_anon_versioning = yes; then _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ $echo "local: *; };" >> $output_objdir/$libname.ver~ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' fi _LT_AC_TAGVAR(link_all_deplibs, $1)=no else _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' fi ;; solaris*) if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then _LT_AC_TAGVAR(ld_shlibs, $1)=no cat <&2 *** Warning: The releases 2.8.* of the GNU linker cannot reliably *** create shared libraries on Solaris systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.9.1 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. EOF elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) case `$LD -v 2>&1` in *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) _LT_AC_TAGVAR(ld_shlibs, $1)=no cat <<_LT_EOF 1>&2 *** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not *** reliably create shared libraries on SCO systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.16.91.0.3 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. _LT_EOF ;; *) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' else _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; sunos4*) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' wlarc= _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; esac if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no; then runpath_var= _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= fi else # PORTME fill in a description of your system's linker (not GNU ld) case $host_os in aix3*) _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_AC_TAGVAR(always_export_symbols, $1)=yes _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' # Note: this linker hardcodes the directories in LIBPATH if there # are no directories specified by -L. _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then # Neither direct hardcoding nor static linking is supported with a # broken collect2. _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported fi ;; aix[[4-9]]*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag="" else # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm if $NM -V 2>&1 | grep 'GNU' > /dev/null; then _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' else _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' fi aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # need to do runtime linking. case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) for ld_flag in $LDFLAGS; do if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then aix_use_runtimelinking=yes break fi done ;; esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. _LT_AC_TAGVAR(archive_cmds, $1)='' _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_AC_TAGVAR(link_all_deplibs, $1)=yes if test "$GCC" = yes; then case $host_os in aix4.[[012]]|aix4.[[012]].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && \ strings "$collect2name" | grep resolve_lib_name >/dev/null then # We have reworked collect2 : else # We have old collect2 _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= fi ;; esac shared_flag='-shared' if test "$aix_use_runtimelinking" = yes; then shared_flag="$shared_flag "'${wl}-G' fi else # not using gcc if test "$host_cpu" = ia64; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' fi fi fi # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to export. _LT_AC_TAGVAR(always_export_symbols, $1)=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' # Determine the default libpath from the value encoded in an empty executable. _LT_AC_SYS_LIBPATH_AIX _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an empty executable. _LT_AC_SYS_LIBPATH_AIX _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' # Exported symbols can be pulled into shared objects from archives _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience' _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes # This is similar to how AIX traditionally builds its shared libraries. _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; amigaos*) _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # see comment about different semantics on the GNU ld section _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; bsdi[[45]]*) _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic ;; cygwin* | mingw* | pw32*) # When not using gcc, we currently assume that we are using # Microsoft Visual C++. # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' # The linker will automatically build a .lib file if we build a DLL. _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true' # FIXME: Should let the user specify the lib program. _LT_AC_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' _LT_AC_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`' _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes ;; darwin* | rhapsody*) case $host_os in rhapsody* | darwin1.[[012]]) _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress' ;; *) # Darwin 1.3 on if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' else case ${MACOSX_DEPLOYMENT_TARGET} in 10.[[012]]) _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; 10.*) _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup' ;; esac fi ;; esac _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no _LT_AC_TAGVAR(hardcode_direct, $1)=no _LT_AC_TAGVAR(hardcode_automatic, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='' _LT_AC_TAGVAR(link_all_deplibs, $1)=yes if test "$GCC" = yes ; then output_verbose_link_cmd='echo' _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" _LT_AC_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" _LT_AC_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" else case $cc_basename in xlc*) output_verbose_link_cmd='echo' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring' _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ;; *) _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; esac fi ;; dgux*) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; freebsd1*) _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor # support. Future versions do this automatically, but an explicit c++rt0.o # does not break anything, and helps significantly (at the cost of a little # extra space). freebsd2.2*) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; # Unfortunately, older versions of FreeBSD 2 do not have this feature. freebsd2*) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; # FreeBSD 3 and greater uses gcc -shared to do shared libraries. freebsd* | dragonfly*) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; hpux9*) if test "$GCC" = yes; then _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' fi _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: _LT_AC_TAGVAR(hardcode_direct, $1)=yes # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ;; hpux10*) if test "$GCC" = yes -a "$with_gnu_ld" = no; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi if test "$with_gnu_ld" = no; then _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes fi ;; hpux11*) if test "$GCC" = yes -a "$with_gnu_ld" = no; then case $host_cpu in hppa*64*) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac else case $host_cpu in hppa*64*) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac fi if test "$with_gnu_ld" = no; then _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: case $host_cpu in hppa*64*|ia64*) _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' _LT_AC_TAGVAR(hardcode_direct, $1)=no _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes ;; esac fi ;; irix5* | irix6* | nonstopux*) if test "$GCC" = yes; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir' fi _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: _LT_AC_TAGVAR(link_all_deplibs, $1)=yes ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out else _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF fi _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; newsos6) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; openbsd*) if test -f /usr/libexec/ld.so; then _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' else case $host_os in openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ;; *) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ;; esac fi else _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; os2*) _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ;; osf3*) if test "$GCC" = yes; then _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' fi _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: ;; osf4* | osf5*) # as osf3* with the addition of -msym flag if test "$GCC" = yes; then _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' else _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' # Both c and cxx compiler support -rpath directly _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' fi _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: ;; solaris*) _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' if test "$GCC" = yes; then wlarc='${wl}' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' else wlarc='' _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' fi _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no case $host_os in solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; *) # The compiler driver will combine and reorder linker options, # but understands `-z linker_flag'. GCC discards it without `$wl', # but is careful enough not to reorder. # Supported since Solaris 2.6 (maybe 2.5.1?) if test "$GCC" = yes; then _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' else _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' fi ;; esac _LT_AC_TAGVAR(link_all_deplibs, $1)=yes ;; sunos4*) if test "x$host_vendor" = xsequent; then # Use $CC to link under sequent, because it throws in some extra .o # files that make .init and .fini sections work. _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' else _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' fi _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; sysv4) case $host_vendor in sni) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true??? ;; siemens) ## LD is ld it makes a PLAMLIB ## CC just makes a GrossModule. _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' _LT_AC_TAGVAR(hardcode_direct, $1)=no ;; motorola) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie ;; esac runpath_var='LD_RUN_PATH' _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; sysv4.3*) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' ;; sysv4*MP*) if test -d /usr/nec; then _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no runpath_var=LD_RUN_PATH hardcode_runpath_var=yes _LT_AC_TAGVAR(ld_shlibs, $1)=yes fi ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; sysv5* | sco3.2v5* | sco5v6*) # Note: We can NOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_AC_TAGVAR(link_all_deplibs, $1)=yes _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' else _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; uts4*) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; esac fi ]) AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no # # Do we need to explicitly link libc? # case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in x|xyes) # Assume -lc should be added _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes if test "$enable_shared" = yes && test "$GCC" = yes; then case $_LT_AC_TAGVAR(archive_cmds, $1) in *'~'*) # FIXME: we may have to deal with multi-command sequences. ;; '$CC '*) # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. AC_MSG_CHECKING([whether -lc should be explicitly linked in]) $rm conftest* echo "$lt_simple_compile_test_code" > conftest.$ac_ext if AC_TRY_EVAL(ac_compile) 2>conftest.err; then soname=conftest lib=conftest libobjs=conftest.$ac_objext deplibs= wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) pic_flag=$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) compiler_flags=-v linker_flags=-v verstring= output_objdir=. libname=conftest lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1) _LT_AC_TAGVAR(allow_undefined_flag, $1)= if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) then _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no else _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes fi _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag else cat conftest.err 1>&5 fi $rm conftest* AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)]) ;; esac fi ;; esac ])# AC_LIBTOOL_PROG_LD_SHLIBS # _LT_AC_FILE_LTDLL_C # ------------------- # Be careful that the start marker always follows a newline. AC_DEFUN([_LT_AC_FILE_LTDLL_C], [ # /* ltdll.c starts here */ # #define WIN32_LEAN_AND_MEAN # #include # #undef WIN32_LEAN_AND_MEAN # #include # # #ifndef __CYGWIN__ # # ifdef __CYGWIN32__ # # define __CYGWIN__ __CYGWIN32__ # # endif # #endif # # #ifdef __cplusplus # extern "C" { # #endif # BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); # #ifdef __cplusplus # } # #endif # # #ifdef __CYGWIN__ # #include # DECLARE_CYGWIN_DLL( DllMain ); # #endif # HINSTANCE __hDllInstance_base; # # BOOL APIENTRY # DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) # { # __hDllInstance_base = hInst; # return TRUE; # } # /* ltdll.c ends here */ ])# _LT_AC_FILE_LTDLL_C # _LT_AC_TAGVAR(VARNAME, [TAGNAME]) # --------------------------------- AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])]) # old names AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL]) AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) AC_DEFUN([AM_PROG_LD], [AC_PROG_LD]) AC_DEFUN([AM_PROG_NM], [AC_PROG_NM]) # This is just to silence aclocal about the macro not being used ifelse([AC_DISABLE_FAST_INSTALL]) AC_DEFUN([LT_AC_PROG_GCJ], [AC_CHECK_TOOL(GCJ, gcj, no) test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" AC_SUBST(GCJFLAGS) ]) AC_DEFUN([LT_AC_PROG_RC], [AC_CHECK_TOOL(RC, windres, no) ]) # Cheap backport of AS_EXECUTABLE_P and required macros # from Autoconf 2.59; we should not use $as_executable_p directly. # _AS_TEST_PREPARE # ---------------- m4_ifndef([_AS_TEST_PREPARE], [m4_defun([_AS_TEST_PREPARE], [if test -x / >/dev/null 2>&1; then as_executable_p='test -x' else as_executable_p='test -f' fi ])])# _AS_TEST_PREPARE # AS_EXECUTABLE_P # --------------- # Check whether a file is executable. m4_ifndef([AS_EXECUTABLE_P], [m4_defun([AS_EXECUTABLE_P], [AS_REQUIRE([_AS_TEST_PREPARE])dnl $as_executable_p $1[]dnl ])])# AS_EXECUTABLE_P # NOTE: This macro has been submitted for inclusion into # # GNU Autoconf as AC_PROG_SED. When it is available in # # a released version of Autoconf we should remove this # # macro and use it instead. # # LT_AC_PROG_SED # -------------- # Check for a fully-functional sed program, that truncates # as few characters as possible. Prefer GNU sed if found. AC_DEFUN([LT_AC_PROG_SED], [AC_MSG_CHECKING([for a sed that does not truncate output]) AC_CACHE_VAL(lt_cv_path_SED, [# Loop through the user's path and test for sed and gsed. # Then use that list of sed's as ones to test for truncation. as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for lt_ac_prog in sed gsed; do for ac_exec_ext in '' $ac_executable_extensions; do if AS_EXECUTABLE_P(["$as_dir/$lt_ac_prog$ac_exec_ext"]); then lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" fi done done done IFS=$as_save_IFS lt_ac_max=0 lt_ac_count=0 # Add /usr/xpg4/bin/sed as it is typically found on Solaris # along with /bin/sed that truncates output. for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do test ! -f $lt_ac_sed && continue cat /dev/null > conftest.in lt_ac_count=0 echo $ECHO_N "0123456789$ECHO_C" >conftest.in # Check for GNU sed and select it if it is found. if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then lt_cv_path_SED=$lt_ac_sed break fi while true; do cat conftest.in conftest.in >conftest.tmp mv conftest.tmp conftest.in cp conftest.in conftest.nl echo >>conftest.nl $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break cmp -s conftest.out conftest.nl || break # 10000 chars as input seems more than enough test $lt_ac_count -gt 10 && break lt_ac_count=`expr $lt_ac_count + 1` if test $lt_ac_count -gt $lt_ac_max; then lt_ac_max=$lt_ac_count lt_cv_path_SED=$lt_ac_sed fi done done ]) SED=$lt_cv_path_SED AC_SUBST([SED]) AC_MSG_RESULT([$SED]) ]) # pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*- # # Copyright © 2004 Scott James Remnant . # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # PKG_PROG_PKG_CONFIG([MIN-VERSION]) # ---------------------------------- AC_DEFUN([PKG_PROG_PKG_CONFIG], [m4_pattern_forbid([^_?PKG_[A-Z_]+$]) m4_pattern_allow([^PKG_CONFIG(_PATH)?$]) AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])dnl if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then AC_PATH_TOOL([PKG_CONFIG], [pkg-config]) fi if test -n "$PKG_CONFIG"; then _pkg_min_version=m4_default([$1], [0.9.0]) AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version]) if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) PKG_CONFIG="" fi fi[]dnl ])# PKG_PROG_PKG_CONFIG # PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) # # Check to see whether a particular set of modules exists. Similar # to PKG_CHECK_MODULES(), but does not set variables or print errors. # # # Similar to PKG_CHECK_MODULES, make sure that the first instance of # this or PKG_CHECK_MODULES is called, or make sure to call # PKG_CHECK_EXISTS manually # -------------------------------------------------------------- AC_DEFUN([PKG_CHECK_EXISTS], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl if test -n "$PKG_CONFIG" && \ AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then m4_ifval([$2], [$2], [:]) m4_ifvaln([$3], [else $3])dnl fi]) # _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES]) # --------------------------------------------- m4_define([_PKG_CONFIG], [if test -n "$PKG_CONFIG"; then if test -n "$$1"; then pkg_cv_[]$1="$$1" else PKG_CHECK_EXISTS([$3], [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`], [pkg_failed=yes]) fi else pkg_failed=untried fi[]dnl ])# _PKG_CONFIG # _PKG_SHORT_ERRORS_SUPPORTED # ----------------------------- AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED], [AC_REQUIRE([PKG_PROG_PKG_CONFIG]) if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then _pkg_short_errors_supported=yes else _pkg_short_errors_supported=no fi[]dnl ])# _PKG_SHORT_ERRORS_SUPPORTED # PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], # [ACTION-IF-NOT-FOUND]) # # # Note that if there is a possibility the first call to # PKG_CHECK_MODULES might not happen, you should be sure to include an # explicit call to PKG_PROG_PKG_CONFIG in your configure.ac # # # -------------------------------------------------------------- AC_DEFUN([PKG_CHECK_MODULES], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl pkg_failed=no AC_MSG_CHECKING([for $1]) _PKG_CONFIG([$1][_CFLAGS], [cflags], [$2]) _PKG_CONFIG([$1][_LIBS], [libs], [$2]) m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS and $1[]_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details.]) if test $pkg_failed = yes; then _PKG_SHORT_ERRORS_SUPPORTED if test $_pkg_short_errors_supported = yes; then $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "$2"` else $1[]_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$2"` fi # Put the nasty error message in config.log where it belongs echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD ifelse([$4], , [AC_MSG_ERROR(dnl [Package requirements ($2) were not met: $$1_PKG_ERRORS Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. _PKG_TEXT ])], [AC_MSG_RESULT([no]) $4]) elif test $pkg_failed = untried; then ifelse([$4], , [AC_MSG_FAILURE(dnl [The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. _PKG_TEXT To get pkg-config, see .])], [$4]) else $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS $1[]_LIBS=$pkg_cv_[]$1[]_LIBS AC_MSG_RESULT([yes]) ifelse([$3], , :, [$3]) fi[]dnl ])# PKG_CHECK_MODULES # Copyright (C) 2002, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_AUTOMAKE_VERSION(VERSION) # ---------------------------- # Automake X.Y traces this macro to ensure aclocal.m4 has been # generated from the m4 files accompanying Automake X.Y. AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"]) # AM_SET_CURRENT_AUTOMAKE_VERSION # ------------------------------- # Call AM_AUTOMAKE_VERSION so it can be traced. # This function is AC_REQUIREd by AC_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], [AM_AUTOMAKE_VERSION([1.9.6])]) # AM_AUX_DIR_EXPAND -*- Autoconf -*- # Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets # $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to # `$srcdir', `$srcdir/..', or `$srcdir/../..'. # # Of course, Automake must honor this variable whenever it calls a # tool from the auxiliary directory. The problem is that $srcdir (and # therefore $ac_aux_dir as well) can be either absolute or relative, # depending on how configure is run. This is pretty annoying, since # it makes $ac_aux_dir quite unusable in subdirectories: in the top # source directory, any form will work fine, but in subdirectories a # relative path needs to be adjusted first. # # $ac_aux_dir/missing # fails when called from a subdirectory if $ac_aux_dir is relative # $top_srcdir/$ac_aux_dir/missing # fails if $ac_aux_dir is absolute, # fails when called from a subdirectory in a VPATH build with # a relative $ac_aux_dir # # The reason of the latter failure is that $top_srcdir and $ac_aux_dir # are both prefixed by $srcdir. In an in-source build this is usually # harmless because $srcdir is `.', but things will broke when you # start a VPATH build or use an absolute $srcdir. # # So we could use something similar to $top_srcdir/$ac_aux_dir/missing, # iff we strip the leading $srcdir from $ac_aux_dir. That would be: # am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` # and then we would define $MISSING as # MISSING="\${SHELL} $am_aux_dir/missing" # This will work as long as MISSING is not called from configure, because # unfortunately $(top_srcdir) has no meaning in configure. # However there are other variables, like CC, which are often used in # configure, and could therefore not use this "fixed" $ac_aux_dir. # # Another solution, used here, is to always expand $ac_aux_dir to an # absolute PATH. The drawback is that using absolute paths prevent a # configured tree to be moved without reconfiguration. AC_DEFUN([AM_AUX_DIR_EXPAND], [dnl Rely on autoconf to set up CDPATH properly. AC_PREREQ([2.50])dnl # expand $ac_aux_dir to an absolute path am_aux_dir=`cd $ac_aux_dir && pwd` ]) # AM_CONDITIONAL -*- Autoconf -*- # Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 7 # AM_CONDITIONAL(NAME, SHELL-CONDITION) # ------------------------------------- # Define a conditional. AC_DEFUN([AM_CONDITIONAL], [AC_PREREQ(2.52)dnl ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl AC_SUBST([$1_TRUE]) AC_SUBST([$1_FALSE]) if $2; then $1_TRUE= $1_FALSE='#' else $1_TRUE='#' $1_FALSE= fi AC_CONFIG_COMMANDS_PRE( [if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then AC_MSG_ERROR([[conditional "$1" was never defined. Usually this means the macro was only invoked conditionally.]]) fi])]) # Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 8 # There are a few dirty hacks below to avoid letting `AC_PROG_CC' be # written in clear, in which case automake, when reading aclocal.m4, # will think it sees a *use*, and therefore will trigger all it's # C support machinery. Also note that it means that autoscan, seeing # CC etc. in the Makefile, will ask for an AC_PROG_CC use... # _AM_DEPENDENCIES(NAME) # ---------------------- # See how the compiler implements dependency checking. # NAME is "CC", "CXX", "GCJ", or "OBJC". # We try a few techniques and use that to set a single cache variable. # # We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was # modified to invoke _AM_DEPENDENCIES(CC); we would have a circular # dependency, and given that the user is not expected to run this macro, # just rely on AC_PROG_CC. AC_DEFUN([_AM_DEPENDENCIES], [AC_REQUIRE([AM_SET_DEPDIR])dnl AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl AC_REQUIRE([AM_MAKE_INCLUDE])dnl AC_REQUIRE([AM_DEP_TRACK])dnl ifelse([$1], CC, [depcc="$CC" am_compiler_list=], [$1], CXX, [depcc="$CXX" am_compiler_list=], [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], [depcc="$$1" am_compiler_list=]) AC_CACHE_CHECK([dependency style of $depcc], [am_cv_$1_dependencies_compiler_type], [if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named `D' -- because `-MD' means `put the output # in D'. mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_$1_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` fi for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with # Solaris 8's {/usr,}/bin/sh. touch sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf case $depmode in nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; none) break ;; esac # We check with `-c' and `-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle `-M -o', and we need to detect this. if depmode=$depmode \ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_$1_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_$1_dependencies_compiler_type=none fi ]) AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) AM_CONDITIONAL([am__fastdep$1], [ test "x$enable_dependency_tracking" != xno \ && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) ]) # AM_SET_DEPDIR # ------------- # Choose a directory name for dependency files. # This macro is AC_REQUIREd in _AM_DEPENDENCIES AC_DEFUN([AM_SET_DEPDIR], [AC_REQUIRE([AM_SET_LEADING_DOT])dnl AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl ]) # AM_DEP_TRACK # ------------ AC_DEFUN([AM_DEP_TRACK], [AC_ARG_ENABLE(dependency-tracking, [ --disable-dependency-tracking speeds up one-time build --enable-dependency-tracking do not reject slow dependency extractors]) if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' fi AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) AC_SUBST([AMDEPBACKSLASH]) ]) # Generate code to set up dependency tracking. -*- Autoconf -*- # Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. #serial 3 # _AM_OUTPUT_DEPENDENCY_COMMANDS # ------------------------------ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], [for mf in $CONFIG_FILES; do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. # We used to match only the files named `Makefile.in', but # some people rename them; so instead we look at the file content. # Grep'ing the first line is not enough: some people post-process # each Makefile.in and add a new line on top of each file to say so. # So let's grep whole file. if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then dirpart=`AS_DIRNAME("$mf")` else continue fi # Extract the definition of DEPDIR, am__include, and am__quote # from the Makefile without running `make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue am__include=`sed -n 's/^am__include = //p' < "$mf"` test -z "am__include" && continue am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n 's/^U = //p' < "$mf"` # Find all dependency output files, they are included files with # $(DEPDIR) in their names. We invoke sed twice because it is the # simplest approach to changing $(DEPDIR) to its actual value in the # expansion. for file in `sed -n " s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`AS_DIRNAME(["$file"])` AS_MKDIR_P([$dirpart/$fdir]) # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done ])# _AM_OUTPUT_DEPENDENCY_COMMANDS # AM_OUTPUT_DEPENDENCY_COMMANDS # ----------------------------- # This macro should only be invoked once -- use via AC_REQUIRE. # # This code is only required when automatic dependency tracking # is enabled. FIXME. This creates each `.P' file that we will # need in order to bootstrap the dependency handling code. AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], [AC_CONFIG_COMMANDS([depfiles], [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) ]) # Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 8 # AM_CONFIG_HEADER is obsolete. It has been replaced by AC_CONFIG_HEADERS. AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)]) # Do all the work for Automake. -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 12 # This macro actually does too much. Some checks are only needed if # your package does certain things. But this isn't really a big deal. # AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) # AM_INIT_AUTOMAKE([OPTIONS]) # ----------------------------------------------- # The call with PACKAGE and VERSION arguments is the old style # call (pre autoconf-2.50), which is being phased out. PACKAGE # and VERSION should now be passed to AC_INIT and removed from # the call to AM_INIT_AUTOMAKE. # We support both call styles for the transition. After # the next Automake release, Autoconf can make the AC_INIT # arguments mandatory, and then we can depend on a new Autoconf # release and drop the old call support. AC_DEFUN([AM_INIT_AUTOMAKE], [AC_PREREQ([2.58])dnl dnl Autoconf wants to disallow AM_ names. We explicitly allow dnl the ones we care about. m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl AC_REQUIRE([AC_PROG_INSTALL])dnl # test to see if srcdir already configured if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi AC_SUBST([CYGPATH_W]) # Define the identity of the package. dnl Distinguish between old-style and new-style calls. m4_ifval([$2], [m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl AC_SUBST([PACKAGE], [$1])dnl AC_SUBST([VERSION], [$2])], [_AM_SET_OPTIONS([$1])dnl AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl _AM_IF_OPTION([no-define],, [AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl # Some tools Automake needs. AC_REQUIRE([AM_SANITY_CHECK])dnl AC_REQUIRE([AC_ARG_PROGRAM])dnl AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) AM_MISSING_PROG(AUTOCONF, autoconf) AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) AM_MISSING_PROG(AUTOHEADER, autoheader) AM_MISSING_PROG(MAKEINFO, makeinfo) AM_PROG_INSTALL_SH AM_PROG_INSTALL_STRIP AC_REQUIRE([AM_PROG_MKDIR_P])dnl # We need awk for the "check" target. The system "awk" is bad on # some platforms. AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AM_SET_LEADING_DOT])dnl _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], [_AM_PROG_TAR([v7])])]) _AM_IF_OPTION([no-dependencies],, [AC_PROVIDE_IFELSE([AC_PROG_CC], [_AM_DEPENDENCIES(CC)], [define([AC_PROG_CC], defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl AC_PROVIDE_IFELSE([AC_PROG_CXX], [_AM_DEPENDENCIES(CXX)], [define([AC_PROG_CXX], defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl ]) ]) # When config.status generates a header, we must update the stamp-h file. # This file resides in the same directory as the config header # that is generated. The stamp files are numbered to have different names. # Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the # loop where config.status creates the headers, so we can generate # our stamp files there. AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], [# Compute $1's index in $config_headers. _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in $1 | $1:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count]) # Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_INSTALL_SH # ------------------ # Define $install_sh. AC_DEFUN([AM_PROG_INSTALL_SH], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl install_sh=${install_sh-"$am_aux_dir/install-sh"} AC_SUBST(install_sh)]) # Copyright (C) 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 2 # Check whether the underlying file-system supports filenames # with a leading dot. For instance MS-DOS doesn't. AC_DEFUN([AM_SET_LEADING_DOT], [rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null AC_SUBST([am__leading_dot])]) # Check to see how 'make' treats includes. -*- Autoconf -*- # Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 3 # AM_MAKE_INCLUDE() # ----------------- # Check to see how make treats includes. AC_DEFUN([AM_MAKE_INCLUDE], [am_make=${MAKE-make} cat > confinc << 'END' am__doit: @echo done .PHONY: am__doit END # If we don't find an include directive, just comment out the code. AC_MSG_CHECKING([for style of include used by $am_make]) am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf # We grep out `Entering directory' and `Leaving directory' # messages which can occur if `w' ends up in MAKEFLAGS. # In particular we don't look at `^make:' because GNU make might # be invoked under some other name (usually "gmake"), in which # case it prints its new name instead of `make'. if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then am__include=include am__quote= _am_result=GNU fi # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then am__include=.include am__quote="\"" _am_result=BSD fi fi AC_SUBST([am__include]) AC_SUBST([am__quote]) AC_MSG_RESULT([$_am_result]) rm -f confinc confmf ]) # Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- # Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 4 # AM_MISSING_PROG(NAME, PROGRAM) # ------------------------------ AC_DEFUN([AM_MISSING_PROG], [AC_REQUIRE([AM_MISSING_HAS_RUN]) $1=${$1-"${am_missing_run}$2"} AC_SUBST($1)]) # AM_MISSING_HAS_RUN # ------------------ # Define MISSING if not defined so far and test if it supports --run. # If it does, set am_missing_run to use it, otherwise, to nothing. AC_DEFUN([AM_MISSING_HAS_RUN], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" # Use eval to expand $SHELL if eval "$MISSING --run true"; then am_missing_run="$MISSING --run " else am_missing_run= AC_MSG_WARN([`missing' script is too old or missing]) fi ]) # Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_MKDIR_P # --------------- # Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise. # # Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories # created by `make install' are always world readable, even if the # installer happens to have an overly restrictive umask (e.g. 077). # This was a mistake. There are at least two reasons why we must not # use `-m 0755': # - it causes special bits like SGID to be ignored, # - it may be too restrictive (some setups expect 775 directories). # # Do not use -m 0755 and let people choose whatever they expect by # setting umask. # # We cannot accept any implementation of `mkdir' that recognizes `-p'. # Some implementations (such as Solaris 8's) are not thread-safe: if a # parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c' # concurrently, both version can detect that a/ is missing, but only # one can create it and the other will error out. Consequently we # restrict ourselves to GNU make (using the --version option ensures # this.) AC_DEFUN([AM_PROG_MKDIR_P], [if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then # We used to keeping the `.' as first argument, in order to # allow $(mkdir_p) to be used without argument. As in # $(mkdir_p) $(somedir) # where $(somedir) is conditionally defined. However this is wrong # for two reasons: # 1. if the package is installed by a user who cannot write `.' # make install will fail, # 2. the above comment should most certainly read # $(mkdir_p) $(DESTDIR)$(somedir) # so it does not work when $(somedir) is undefined and # $(DESTDIR) is not. # To support the latter case, we have to write # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), # so the `.' trick is pointless. mkdir_p='mkdir -p --' else # On NextStep and OpenStep, the `mkdir' command does not # recognize any option. It will interpret all options as # directories to create, and then abort because `.' already # exists. for d in ./-p ./--version; do test -d $d && rmdir $d done # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. if test -f "$ac_aux_dir/mkinstalldirs"; then mkdir_p='$(mkinstalldirs)' else mkdir_p='$(install_sh) -d' fi fi AC_SUBST([mkdir_p])]) # Helper functions for option handling. -*- Autoconf -*- # Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 3 # _AM_MANGLE_OPTION(NAME) # ----------------------- AC_DEFUN([_AM_MANGLE_OPTION], [[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) # _AM_SET_OPTION(NAME) # ------------------------------ # Set option NAME. Presently that only means defining a flag for this option. AC_DEFUN([_AM_SET_OPTION], [m4_define(_AM_MANGLE_OPTION([$1]), 1)]) # _AM_SET_OPTIONS(OPTIONS) # ---------------------------------- # OPTIONS is a space-separated list of Automake options. AC_DEFUN([_AM_SET_OPTIONS], [AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) # _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) # ------------------------------------------- # Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. AC_DEFUN([_AM_IF_OPTION], [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) # Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PATH_PYTHON([MINIMUM-VERSION], [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) # --------------------------------------------------------------------------- # Adds support for distributing Python modules and packages. To # install modules, copy them to $(pythondir), using the python_PYTHON # automake variable. To install a package with the same name as the # automake package, install to $(pkgpythondir), or use the # pkgpython_PYTHON automake variable. # # The variables $(pyexecdir) and $(pkgpyexecdir) are provided as # locations to install python extension modules (shared libraries). # Another macro is required to find the appropriate flags to compile # extension modules. # # If your package is configured with a different prefix to python, # users will have to add the install directory to the PYTHONPATH # environment variable, or create a .pth file (see the python # documentation for details). # # If the MINIMUM-VERSION argument is passed, AM_PATH_PYTHON will # cause an error if the version of python installed on the system # doesn't meet the requirement. MINIMUM-VERSION should consist of # numbers and dots only. AC_DEFUN([AM_PATH_PYTHON], [ dnl Find a Python interpreter. Python versions prior to 1.5 are not dnl supported because the default installation locations changed from dnl $prefix/lib/site-python in 1.4 to $prefix/lib/python1.5/site-packages dnl in 1.5. m4_define_default([_AM_PYTHON_INTERPRETER_LIST], [python python2 python2.5 python2.4 python2.3 python2.2 dnl python2.1 python2.0 python1.6 python1.5]) m4_if([$1],[],[ dnl No version check is needed. # Find any Python interpreter. if test -z "$PYTHON"; then AC_PATH_PROGS([PYTHON], _AM_PYTHON_INTERPRETER_LIST, :) fi am_display_PYTHON=python ], [ dnl A version check is needed. if test -n "$PYTHON"; then # If the user set $PYTHON, use it and don't search something else. AC_MSG_CHECKING([whether $PYTHON version >= $1]) AM_PYTHON_CHECK_VERSION([$PYTHON], [$1], [AC_MSG_RESULT(yes)], [AC_MSG_ERROR(too old)]) am_display_PYTHON=$PYTHON else # Otherwise, try each interpreter until we find one that satisfies # VERSION. AC_CACHE_CHECK([for a Python interpreter with version >= $1], [am_cv_pathless_PYTHON],[ for am_cv_pathless_PYTHON in _AM_PYTHON_INTERPRETER_LIST none; do test "$am_cv_pathless_PYTHON" = none && break AM_PYTHON_CHECK_VERSION([$am_cv_pathless_PYTHON], [$1], [break]) done]) # Set $PYTHON to the absolute path of $am_cv_pathless_PYTHON. if test "$am_cv_pathless_PYTHON" = none; then PYTHON=: else AC_PATH_PROG([PYTHON], [$am_cv_pathless_PYTHON]) fi am_display_PYTHON=$am_cv_pathless_PYTHON fi ]) if test "$PYTHON" = :; then dnl Run any user-specified action, or abort. m4_default([$3], [AC_MSG_ERROR([no suitable Python interpreter found])]) else dnl Query Python for its version number. Getting [:3] seems to be dnl the best way to do this; it's what "site.py" does in the standard dnl library. AC_CACHE_CHECK([for $am_display_PYTHON version], [am_cv_python_version], [am_cv_python_version=`$PYTHON -c "import sys; print sys.version[[:3]]"`]) AC_SUBST([PYTHON_VERSION], [$am_cv_python_version]) dnl Use the values of $prefix and $exec_prefix for the corresponding dnl values of PYTHON_PREFIX and PYTHON_EXEC_PREFIX. These are made dnl distinct variables so they can be overridden if need be. However, dnl general consensus is that you shouldn't need this ability. AC_SUBST([PYTHON_PREFIX], ['${prefix}']) AC_SUBST([PYTHON_EXEC_PREFIX], ['${exec_prefix}']) dnl At times (like when building shared libraries) you may want dnl to know which OS platform Python thinks this is. AC_CACHE_CHECK([for $am_display_PYTHON platform], [am_cv_python_platform], [am_cv_python_platform=`$PYTHON -c "import sys; print sys.platform"`]) AC_SUBST([PYTHON_PLATFORM], [$am_cv_python_platform]) dnl Set up 4 directories: dnl pythondir -- where to install python scripts. This is the dnl site-packages directory, not the python standard library dnl directory like in previous automake betas. This behavior dnl is more consistent with lispdir.m4 for example. dnl Query distutils for this directory. distutils does not exist in dnl Python 1.5, so we fall back to the hardcoded directory if it dnl doesn't work. AC_CACHE_CHECK([for $am_display_PYTHON script directory], [am_cv_python_pythondir], [am_cv_python_pythondir=`$PYTHON -c "from distutils import sysconfig; print sysconfig.get_python_lib(0,0,prefix='$PYTHON_PREFIX')" 2>/dev/null || echo "$PYTHON_PREFIX/lib/python$PYTHON_VERSION/site-packages"`]) AC_SUBST([pythondir], [$am_cv_python_pythondir]) dnl pkgpythondir -- $PACKAGE directory under pythondir. Was dnl PYTHON_SITE_PACKAGE in previous betas, but this naming is dnl more consistent with the rest of automake. AC_SUBST([pkgpythondir], [\${pythondir}/$PACKAGE]) dnl pyexecdir -- directory for installing python extension modules dnl (shared libraries) dnl Query distutils for this directory. distutils does not exist in dnl Python 1.5, so we fall back to the hardcoded directory if it dnl doesn't work. AC_CACHE_CHECK([for $am_display_PYTHON extension module directory], [am_cv_python_pyexecdir], [am_cv_python_pyexecdir=`$PYTHON -c "from distutils import sysconfig; print sysconfig.get_python_lib(1,0,prefix='$PYTHON_EXEC_PREFIX')" 2>/dev/null || echo "${PYTHON_EXEC_PREFIX}/lib/python${PYTHON_VERSION}/site-packages"`]) AC_SUBST([pyexecdir], [$am_cv_python_pyexecdir]) dnl pkgpyexecdir -- $(pyexecdir)/$(PACKAGE) AC_SUBST([pkgpyexecdir], [\${pyexecdir}/$PACKAGE]) dnl Run any user-specified action. $2 fi ]) # AM_PYTHON_CHECK_VERSION(PROG, VERSION, [ACTION-IF-TRUE], [ACTION-IF-FALSE]) # --------------------------------------------------------------------------- # Run ACTION-IF-TRUE if the Python interpreter PROG has version >= VERSION. # Run ACTION-IF-FALSE otherwise. # This test uses sys.hexversion instead of the string equivalent (first # word of sys.version), in order to cope with versions such as 2.2c1. # hexversion has been introduced in Python 1.5.2; it's probably not # worth to support older versions (1.5.1 was released on October 31, 1998). AC_DEFUN([AM_PYTHON_CHECK_VERSION], [prog="import sys, string # split strings by '.' and convert to numeric. Append some zeros # because we need at least 4 digits for the hex conversion. minver = map(int, string.split('$2', '.')) + [[0, 0, 0]] minverhex = 0 for i in xrange(0, 4): minverhex = (minverhex << 8) + minver[[i]] sys.exit(sys.hexversion < minverhex)" AS_IF([AM_RUN_LOG([$1 -c "$prog"])], [$3], [$4])]) # Check to make sure that the build environment is sane. -*- Autoconf -*- # Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 4 # AM_SANITY_CHECK # --------------- AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) # Just in case sleep 1 echo timestamp > conftest.file # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` if test "$[*]" = "X"; then # -L didn't work. set X `ls -t $srcdir/configure conftest.file` fi rm -f conftest.file if test "$[*]" != "X $srcdir/configure conftest.file" \ && test "$[*]" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken alias in your environment]) fi test "$[2]" = conftest.file ) then # Ok. : else AC_MSG_ERROR([newly created file is older than distributed files! Check your system clock]) fi AC_MSG_RESULT(yes)]) # Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_INSTALL_STRIP # --------------------- # One issue with vendor `install' (even GNU) is that you can't # specify the program used to strip binaries. This is especially # annoying in cross-compiling environments, where the build's strip # is unlikely to handle the host's binaries. # Fortunately install-sh will honor a STRIPPROG variable, so we # always use install-sh in `make install-strip', and initialize # STRIPPROG with the value of the STRIP variable (set by the user). AC_DEFUN([AM_PROG_INSTALL_STRIP], [AC_REQUIRE([AM_PROG_INSTALL_SH])dnl # Installed binaries are usually stripped using `strip' when the user # run `make install-strip'. However `strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the `STRIP' environment variable to overrule this program. dnl Don't test for $cross_compiling = yes, because it might be `maybe'. if test "$cross_compiling" != no; then AC_CHECK_TOOL([STRIP], [strip], :) fi INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) # Check how to create a tarball. -*- Autoconf -*- # Copyright (C) 2004, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 2 # _AM_PROG_TAR(FORMAT) # -------------------- # Check how to create a tarball in format FORMAT. # FORMAT should be one of `v7', `ustar', or `pax'. # # Substitute a variable $(am__tar) that is a command # writing to stdout a FORMAT-tarball containing the directory # $tardir. # tardir=directory && $(am__tar) > result.tar # # Substitute a variable $(am__untar) that extract such # a tarball read from stdin. # $(am__untar) < result.tar AC_DEFUN([_AM_PROG_TAR], [# Always define AMTAR for backward compatibility. AM_MISSING_PROG([AMTAR], [tar]) m4_if([$1], [v7], [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], [m4_case([$1], [ustar],, [pax],, [m4_fatal([Unknown tar format])]) AC_MSG_CHECKING([how to create a $1 tar archive]) # Loop over all known methods to create a tar archive until one works. _am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' _am_tools=${am_cv_prog_tar_$1-$_am_tools} # Do not fold the above two line into one, because Tru64 sh and # Solaris sh will not grok spaces in the rhs of `-'. for _am_tool in $_am_tools do case $_am_tool in gnutar) for _am_tar in tar gnutar gtar; do AM_RUN_LOG([$_am_tar --version]) && break done am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' am__untar="$_am_tar -xf -" ;; plaintar) # Must skip GNU tar: if it does not support --format= it doesn't create # ustar tarball either. (tar --version) >/dev/null 2>&1 && continue am__tar='tar chf - "$$tardir"' am__tar_='tar chf - "$tardir"' am__untar='tar xf -' ;; pax) am__tar='pax -L -x $1 -w "$$tardir"' am__tar_='pax -L -x $1 -w "$tardir"' am__untar='pax -r' ;; cpio) am__tar='find "$$tardir" -print | cpio -o -H $1 -L' am__tar_='find "$tardir" -print | cpio -o -H $1 -L' am__untar='cpio -i -H $1 -d' ;; none) am__tar=false am__tar_=false am__untar=false ;; esac # If the value was cached, stop now. We just wanted to have am__tar # and am__untar set. test -n "${am_cv_prog_tar_$1}" && break # tar/untar a dummy directory, and stop if the command works rm -rf conftest.dir mkdir conftest.dir echo GrepMe > conftest.dir/file AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) rm -rf conftest.dir if test -s conftest.tar; then AM_RUN_LOG([$am__untar /dev/null 2>&1 && break fi done rm -rf conftest.dir AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) AC_MSG_RESULT([$am_cv_prog_tar_$1])]) AC_SUBST([am__tar]) AC_SUBST([am__untar]) ]) # _AM_PROG_TAR m4_include([m4/iconv.m4]) m4_include([m4/lib-ld.m4]) m4_include([m4/lib-link.m4]) m4_include([m4/lib-prefix.m4]) m4_include([acinclude.m4]) obexftp-0.23/configure.in0000644000076600000240000001117011146600644012340 00000000000000## Process this file with autoconf to produce a configure script. # try CFLAGS="$CFLAGS -g -Wall -Wmissing-declarations -Wmissing-prototypes -Werror" AC_INIT(ObexFTP, 0.23, zany@triq.net) #AC_CONFIG_SRCDIR(src/foo.c) AM_INIT_AUTOMAKE(dist-bzip2) AM_CONFIG_HEADER(config.h) # note: AC_HELP_STRING is deprecated in autoconf 2.59 and later but # AS_HELP_STRING is not available in autoconf 2.57 or earlier. dnl AM_MAINTAINER_MODE # Checks for programs. AC_ISC_POSIX AC_PROG_CC AC_PROG_INSTALL AC_PROG_LN_S # Initialize libtool AC_PROG_LIBTOOL # Checks for header files. AC_HEADER_STDC AC_HEADER_DIRENT AC_CHECK_HEADERS([arpa/inet.h errno.h fcntl.h netdb.h netinet/in.h stdlib.h string.h sys/ioctl.h sys/socket.h sys/time.h termios.h unistd.h sys/select.h sys/times.h]) AC_PATH_WIN32 # Checks for libraries. PKG_CHECK_MODULES(OPENOBEX,openobex) REQUIRES="openobex" AM_ICONV AC_CHECK_HEADERS([langinfo.h]) dnl IRDA_CHECK BLUETOOTH_CHECK if test "${bluez_found}" = "yes"; then REQUIRES="$REQUIRES bluez" SDPLIB_CHECK fi USB_CHECK if test "${am_cv_usb_found}" = "yes"; then REQUIRES="$REQUIRES libusb" fi # check for optional swig rebuild AC_ARG_ENABLE([swig], [AC_HELP_STRING([--enable-swig], [Rebuild language bindings @<:@default=no@:>@])], [case "${enableval}" in yes) want_swig_rebuild=true ;; no) want_swig_rebuild=false ;; *) AC_MSG_ERROR(bad value ${enableval} for --enable-swig) ;; esac],[want_swig_rebuild=false]) AM_CONDITIONAL(ENABLE_SWIG, test x$want_swig_rebuild = xtrue) if test x$want_swig_rebuild = xtrue; then AC_PROG_SWIG(1.3.7) dnl how low can we go? fi # check for language bindings AC_ARG_ENABLE([perl], [AC_HELP_STRING([--disable-perl], [Disables perl language bindings @<:@default=auto@:>@])], [ac_perl_enabled=$enableval], [AC_CHECK_PROG([ac_perl_enabled],[perl],[yes],[no])]) if test "$ac_perl_enabled" = yes; then AC_PATH_PROG([PERL], [perl], []) fi AM_CONDITIONAL([ENABLE_PERL], [test x"$PERL" != x""]) AC_ARG_ENABLE([python], [AC_HELP_STRING([--disable-python], [Disables python language bindings @<:@default=auto@:>@])], [ac_python_enabled=$enableval], [AC_CHECK_PROG([ac_python_enabled],[python[$PYTHON_VERSION]],[yes],[no])]) if test "$ac_python_enabled" = yes; then AM_PATH_PYTHON fi AM_CONDITIONAL([ENABLE_PYTHON], [test x"$PYTHON" != x""]) AC_ARG_ENABLE([ruby], [AC_HELP_STRING([--disable-ruby], [Disables ruby language bindings @<:@default=auto@:>@])], [ac_ruby_enabled=$enableval], [AC_CHECK_PROG([ac_ruby_enabled],[ruby],[yes],[no])]) if test "$ac_ruby_enabled" = yes; then AC_PATH_PROG([RUBY], [ruby], []) fi AM_CONDITIONAL([ENABLE_RUBY], [test x"$RUBY" != x""]) AC_ARG_ENABLE([tcl], [AC_HELP_STRING([--enable-tcl], [Enables tcl language bindings @<:@default=off@:>@])], [ac_tcl_enabled=$enableval], [AC_CHECK_PROG([ac_tcl_enabled],[tclsh],[yes],[no])]) if test "$ac_tcl_enabled" = yes; then AC_PATH_PROG([TCLSH], [tclsh], []) fi AM_CONDITIONAL([ENABLE_TCL], [test x"$TCLSH" != x""]) dnl no need to build docs by default AC_ARG_ENABLE(builddocs, AC_HELP_STRING([--enable-builddocs], [Compile documentation @<:@default=no@:>@]), [case "${enableval}" in yes) builddocs=true ;; no) builddocs=false ;; *) AC_MSG_ERROR(bad value ${enableval} for --enable-builddocs) ;; esac],[builddocs=false]) AM_CONDITIONAL(BUILD_DOCS, test x$builddocs = xtrue) dnl Check for C99 __func__ AC_TRY_COMPILE([ #include], [printf(__func__)],, [AC_DEFINE(__func__, "", [non-C99 fake support for __func__])]) dnl Turn on all warnings but no debugging when using gcc if test "$ac_cv_prog_gcc" = "yes"; then CFLAGS="$CFLAGS -W -Wundef -Wmissing-declarations -Wmissing-prototypes" fi AC_SUBST(CFLAGS) AC_SUBST(LDFLAGS) CFLAGS="$CFLAGS -Wall" # Project-specific settings # VERSION="..." already set my AM_INIT_AUTOMAKE above # libtool uses current:revision:age to produce .c-a.a.r # http://www.gnu.org/software/libtool/manual.html#Updating-version-info OBEXFTP_VERSION="3\:0\:3" MULTICOBEX_VERSION="1\:1\:0" BFB_VERSION="0\:5\:0" AC_SUBST(VERSION) AC_SUBST(OBEXFTP_VERSION) AC_SUBST(MULTICOBEX_VERSION) AC_SUBST(BFB_VERSION) AC_SUBST(REQUIRES) # should use AC_CONFIG_FILES AC_OUTPUT([ Makefile swig/perl/Makefile swig/perl/Makefile.PL swig/python/Makefile swig/python/setup.py swig/ruby/Makefile swig/tcl/Makefile swig/Makefile examples/Makefile doc/Makefile apps/Makefile bfb/Makefile multicobex/Makefile obexftp/Makefile obexftp.spec obexftp.pc ])