ocaml-magic-0.7.3/0000755000175000017500000000000010771673031012361 5ustar trchtrchocaml-magic-0.7.3/src/0000755000175000017500000000000010771673031013150 5ustar trchtrchocaml-magic-0.7.3/src/magic.ml0000644000175000017500000000747310771534606014601 0ustar trchtrch(* File: magic.ml Copyright (C) 2005 Christophe Troestler email: Christophe.Troestler@umh.ac.be WWW: http://www.umh.ac.be/math/an/software/ This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License version 2.1 as published by the Free Software Foundation, with the special exception on linking described in file LICENSE. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the file LICENSE for more details. *) (* $Id: magic.ml,v 1.2 2008/03/23 20:11:50 chris_77 Exp $ *) open Printf exception Failure of string let () = Callback.register_exception "Magic.Failure" (Failure "message") type t (* hold magic_t *) external magic_open : int -> t = "ocaml_magic_open" external close : t -> unit = "ocaml_magic_close" external magic_file : t -> string -> string = "ocaml_magic_file" external magic_buffer : t -> string -> int -> string = "ocaml_magic_buffer" external magic_setflags : t -> int -> unit = "ocaml_magic_setflags" external magic_check_default : t -> bool = "ocaml_magic_check_default" external magic_check : t -> string -> bool = "ocaml_magic_check" external magic_compile_default : t -> unit = "ocaml_magic_compile_default" external magic_compile : t -> string -> unit = "ocaml_magic_compile" external magic_load_default : t -> unit = "ocaml_magic_load_default" external magic_load : t -> string -> unit = "ocaml_magic_load" type flag = | Symlink | Compress | Devices | Mime | Continue | Check (* => flush stderr for all funs. FIXME *) | Preserve_atime | Raw (* WARNING: Keep in sync with magic.h *) let int_of_flag = function | Symlink -> 0x002 | Compress -> 0x004 | Devices -> 0x008 | Mime -> 0x010 | Continue -> 0x020 | Check -> 0x040 | Preserve_atime -> 0x080 | Raw -> 0x100 let int_of_flags flags = List.fold_left (fun fs f -> fs lor (int_of_flag f)) 0x000 flags (* Concatenate the filenames with ":". No escaping of ':' in a filename will work (the code in libmagic is simple, really). Moreover, '\000' can neither be present. Thus only tolerate a-zA-Z0-9._-/\ in filenames *) let concat funname filenames = (* Check the filename [s]. *) let check s = for i = 0 to String.length s - 1 do match s.[i] with | 'a' .. 'z' | 'A' .. 'Z' | '0' .. '9' | ' ' | '.' | '_' | '-' | '/' | '\\' -> () | c -> let m = sprintf "Magic.%s: character %C not allowed in filename %S." funname c s in raise(Failure m) done in List.iter check filenames; String.concat ":" filenames let load cookie = function | [] -> magic_load_default cookie | filenames -> magic_load cookie (concat "load" filenames) let compile cookie = function | [] -> magic_compile_default cookie | filenames -> magic_compile cookie (concat "compile" filenames) let check cookie = function | [] -> magic_check_default cookie | filenames -> magic_check cookie (concat "check" filenames) let make ?(flags=[]) filenames = let cookie = magic_open(int_of_flags flags) in load cookie filenames; cookie let create = make let setflags cookie flags = magic_setflags cookie (int_of_flags flags) let file cookie filename = (* FIXME: For a strange reason the toplevel loops with an error "I/O error: Bad file descriptor" when querying an unexisting file or a char device,... (this seems to be gone...). *) magic_file cookie filename let buffer cookie ?len s = let len = match len with | None -> String.length s | Some l -> if 0 <= l && l <= String.length s then l else invalid_arg(sprintf "Magic.buffer: len=%i not in [0, %i]" l (String.length s)) in magic_buffer cookie s len ocaml-magic-0.7.3/src/META.in0000644000175000017500000000026710771430474014235 0ustar trchtrch# ocaml-magic -*-conf-*- name="magic" version="@VERSION@" description="OCaml interface for libmagic" requires="@requires@" archive(byte)="magic.cma" archive(native)="magic.cmxa" ocaml-magic-0.7.3/src/magic_stubs.c0000644000175000017500000002045710771540021015614 0ustar trchtrch/* File: magic.ml Copyright (C) 2005 Christophe Troestler email: Christophe.Troestler@umh.ac.be WWW: http://www.umh.ac.be/math/an/software/ This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License version 2.1 as published by the Free Software Foundation, with the special exception on linking described in file LICENSE. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the file LICENSE for more details. */ /* $Id: magic_stubs.c,v 1.2 2008/03/23 20:39:45 chris_77 Exp $ */ #include #include #include #include #include #include #include /* man libmagic(3) */ #include #define _XOPEN_SOURCE 600 /* XSI-compliant strerror_r() */ #include #include #ifdef WANT_DEBUG #define DEBUG(...) \ fprintf(stderr, "DEBUG magic_stub: " __VA_ARGS__); \ fprintf(stderr, "\n"); \ fflush(stderr) #else #define DEBUG(...) #endif #define CAML_MAGIC_VERSION "0.2" /* * Failure */ /* Raise [Magic.Failure] with the message [msg]. */ static void raise_magic_failure(const char * msg) { static value * exn = NULL; if (exn == NULL) exn = caml_named_value("Magic.Failure"); raise_with_string(*exn, (char *) msg); } /* [raise_on_error] raises an exception according to the error that happened at the last operation on [cookie]. [fname] is the name of the calling function. */ static void raise_on_error(const char* fname, const magic_t cookie) { CAMLparam0(); CAMLlocal1(verrmsg); static value * exn = NULL; const char *err_magic = magic_error(cookie); char *errmsg; /* For thread safety of error messages */ const int flen = strlen(fname); DEBUG("errno=%i : %i : %s", errno, magic_errno(cookie), err_magic); if (err_magic != NULL) { /* libmagic error */ if ((errmsg = malloc(flen + strlen(err_magic) + 1)) == NULL) raise_out_of_memory(); if (exn == NULL) exn = caml_named_value("Magic.Failure"); strcpy(errmsg, fname); strcpy(errmsg + flen, err_magic); verrmsg = copy_string(errmsg); free(errmsg); /* err_magic is freed by magic_close */ raise_with_arg(*exn, verrmsg); } else { /* System error */ const int err = magic_errno(cookie); int len = 80; /* buffer length */ if ((errmsg = malloc(len)) == NULL) raise_out_of_memory(); strcpy(errmsg, fname); #ifdef HAVE_STRERROR_R /* Allocate buffer [errmsg] until there is enough space for the * error message. */ while(strerror_r(err, errmsg + flen, len - flen) < 0) { /* Reallocate to a bigger size -- no need to keep the contents */ len *= 2; free(errmsg); if ((errmsg = malloc(len)) == NULL) raise_out_of_memory(); strcpy(errmsg, fname); } #else strncat(errmsg, strerror(err), len - flen - 1); #endif verrmsg = copy_string(errmsg); free(errmsg); raise_sys_error(verrmsg); } CAMLreturn0; } /* * magic_t */ /* magic_t is a pointer on 'struct magic_set' so one can set it to NULL */ #define COOKIE_VAL(v) (* ((magic_t *) Data_custom_val(v))) /* If the cookie has not been forcibly closed with [magic_close], free it. */ static void free_cookie(value c) { magic_t cookie = COOKIE_VAL(c); if (cookie != NULL) { magic_close(cookie); DEBUG("free_cookie: freeing cookie %p.", cookie); COOKIE_VAL(c) = NULL; } } /* compare magic_t pointers (=> total order) */ static int compare_cookie(value c1, value c2) { magic_t cookie1 = COOKIE_VAL(c1), cookie2 = COOKIE_VAL(c2); if (cookie1 == cookie2) return 0; else if (cookie1 < cookie2) return -1; else return 1; } static struct custom_operations cookie_ops = { /* identifier */ "be.ac.umh.math/magic.cookie." CAML_MAGIC_VERSION, /* finalize */ free_cookie, /* compare */ compare_cookie, /* hash */ custom_hash_default, /* serialize */ custom_serialize_default, /* deserialize */ custom_deserialize_default }; #define ALLOC_COOKIE alloc_custom(&cookie_ops, sizeof(magic_t), \ sizeof(magic_t), 40 * sizeof(magic_t)) /* * Stubs */ CAMLprim value ocaml_magic_open(value flags) { CAMLparam1(flags); CAMLlocal2(c,verrmsg); char *errmsg; int len = 80; c = ALLOC_COOKIE; if ((COOKIE_VAL(c) = magic_open(Int_val(flags) | MAGIC_ERROR)) == NULL) { if (errno == EINVAL) /* An unsupported value for flags was given */ raise_magic_failure("Magic.create: Preserve_atime not supported"); else { const int err = errno; /* save it */ if ((errmsg = malloc(len)) == NULL) raise_out_of_memory(); strcpy(errmsg, "Magic.create: "); /* 14 chars */ #ifdef HAVE_STRERROR_R /* No cookie yet, so one cannot use the above generic err fun */ while(strerror_r(err, errmsg + 14, len - 14) < 0) { len *= 2; free(errmsg); if ((errmsg = malloc(len)) == NULL) raise_out_of_memory(); strcpy(errmsg, "Magic.create: "); } #else strncat(errmsg, strerror(err), len - 15); #endif verrmsg = copy_string(errmsg); free(errmsg); raise_sys_error(verrmsg); } } CAMLreturn(c); } CAMLprim value ocaml_magic_close(value c) { CAMLparam1(c); magic_t cookie = COOKIE_VAL(c); if (cookie != NULL) /* if first time it is called */ magic_close(cookie); COOKIE_VAL(c) = NULL; /* For the finalization function & multiple calls */ CAMLreturn(Val_unit); } CAMLprim value ocaml_magic_file(value c, value fname) { CAMLparam2(c, fname); const char * ans; const magic_t cookie = COOKIE_VAL(c); if (cookie == NULL) invalid_argument("Magic.file"); if ((ans = magic_file(cookie, String_val(fname))) == NULL) { raise_on_error("Magic.file: ", cookie); } CAMLreturn(copy_string(ans)); } CAMLprim value ocaml_magic_buffer(value c, value buf, value len) { CAMLparam3(c, buf, len); const char * ans; const magic_t cookie = COOKIE_VAL(c); if (cookie == NULL) caml_invalid_argument("Magic.buffer"); if ((ans = magic_buffer(cookie, String_val(buf), Int_val(len))) == NULL) raise_on_error("Magic.buffer: ", cookie); CAMLreturn(copy_string(ans)); } CAMLprim value ocaml_magic_setflags(value c, value flags) { CAMLparam2(c, flags); const magic_t cookie = COOKIE_VAL(c); if (cookie == NULL) caml_invalid_argument("Magic.setflags"); if (magic_setflags(cookie, Int_val(flags)) < 0) raise_magic_failure("Magic.setflags: Preserve_atime not supported"); CAMLreturn(Val_unit); } #define CHECK(fname) \ const magic_t cookie = COOKIE_VAL(c); \ \ if (cookie == NULL) caml_invalid_argument("Magic.check"); \ if (magic_check(cookie, fname) < 0) \ CAMLreturn(Val_false); \ else \ CAMLreturn(Val_true) CAMLprim value ocaml_magic_check_default(value c) { CAMLparam1(c); CHECK(NULL); } CAMLprim value ocaml_magic_check(value c, value filenames) { CAMLparam2(c, filenames); CHECK(String_val(filenames)); } #define COMPILE(fname) \ const magic_t cookie = COOKIE_VAL(c); \ \ if (cookie == NULL) caml_invalid_argument("Magic.compile"); \ if (magic_compile(cookie, fname) < 0) \ raise_on_error("Magic.compile: ", cookie); \ CAMLreturn(Val_unit) CAMLprim value ocaml_magic_compile_default(value c) { CAMLparam1(c); COMPILE(NULL); } CAMLprim value ocaml_magic_compile(value c, value filenames) { CAMLparam2(c, filenames); COMPILE(String_val(filenames)); } #define LOAD(fname) \ const magic_t cookie = COOKIE_VAL(c); \ \ if (cookie == NULL) caml_invalid_argument("Magic.load"); \ if (magic_load(cookie, fname) < 0) { \ DEBUG("Magic.load: failed"); \ /* raise_on_error("Magic.load: ", cookie);*/ \ raise_magic_failure("Magic.load"); \ } \ CAMLreturn(Val_unit) CAMLprim value ocaml_magic_load_default(value c) { CAMLparam1(c); LOAD(NULL); } CAMLprim value ocaml_magic_load(value c, value filenames) { CAMLparam2(c, filenames); LOAD(String_val(filenames)); } ocaml-magic-0.7.3/src/Makefile.in0000644000175000017500000000127210771672510015220 0ustar trchtrch# -*-makefile-gmake-*- OCAMLMAKEFILE = ../OCamlMakefile ANNOTATE = "yes" SOURCES = magic.ml magic.mli magic_stubs.c RESULT = magic # Only install the files that exist, the default OCamlMakefile tries # to install the native code ones even on arch with no native code support. LIBINSTALL_FILES = $(wildcard *.mli *.cmi *.cma *.cmx *.cmxa *.a *.so) INCDIRS = @INC@ LIBS = @all_requires@ CLIBS = @CLIBS@ CFLAGS = @CFLAGS@ #CFLAGS += -DWANT_DEBUG .PHONY: all byte opt install uninstall update all: @BEST@ byte: byte-code-library opt: native-code-library install: libinstall uninstall: libuninstall update: uninstall install OCAMLC = @OCAMLC@ OCAMLOPT = @OCAMLOPT@ include $(OCAMLMAKEFILE) ocaml-magic-0.7.3/src/magic.mli0000644000175000017500000001066010771672732014745 0ustar trchtrch(* File: magic.mli Copyright (C) 2005 Christophe Troestler email: chris_77@users.sourceforge.net WWW: http://www.umh.ac.be/math/an/software/ This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License version 2.1 as published by the Free Software Foundation, with the special exception on linking described in file LICENSE. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the file LICENSE for more details. *) (* $Id: magic.mli,v 1.7 2008/03/24 09:35:22 chris_77 Exp $ *) (** Try to identify the type of file using some "magic number" tests. @author Christophe Troestler @version 0.7.3 *) type t (** Magic "cookies". *) exception Failure of string (** Raised by the functions of this library when they fail. The string is an explanation of why the failure happened. *) type flag = | Symlink (** If the file queried is a symlink, follow it. *) | Compress (** If the file is compressed, unpack it and look at the contents. *) | Devices (** If the file is a block or character special device, then open the device and try to look in its contents. *) | Mime (** Return a mime string, instead of a textual description. *) | Continue (** Return all matches, not just the first. *) | Check (** Check the magic database for consistency and print warnings to stderr. *) | Preserve_atime (** On systems that support utime(2) or utimes(2), attempt to preserve the access time of files analyzed. *) | Raw (** Don't translate unprintable characters to a \ooo octal representation. *) val make : ?flags:flag list -> string list -> t (** [make ?flags filenames] creates a magic cookie, loading the databases in [filenames]. If [filenames = []], the default database is used. @param flags specifies how the other magic functions should behave (default: [[]]). @raise Magic.Failure if there was an error allocating the magic cookie. @raise Sys_error if there was an operating system error. *) val create : ?flags:flag list -> string list -> t (** @deprecated Synonym for {!Magic.make}. *) val close : t -> unit (** [close cookie] frees the resources associated with the cookie [c]. You need not to close cookies as the resources will be freed by the garbage collector anyway. *) val file : t -> string -> string (** [file cookie filename] returns a textual description of the contents of the filename argument. @raise Magic.Failure if an error occurred. @raise Invalid_argument if the cookie is closed. @raise Sys_error if there was an operating system error. *) val buffer : t -> ?len:int -> string -> string (** [file cookie ?len buf] returns a textual description of the contents of the filename argument. @raise Magic.Failure if an error occurred. @raise Invalid_argument if [cookie] is closed or if one does not have [0 <= len <= String.length buf]. *) val setflags : t -> flag list -> unit (** [setflags cookie flags] specifies how the other magic functions should behave. @raise Magic.Failure if the {!Magic.flag} [Preserve_atime] is not supported by the operating system. @raise Invalid_argument if the cookie has been closed. *) val load : t -> string list -> unit (** [load cookie filenames] loads the the list of database files [filenames], or [] for the default database file. @raise Invalid_argument if the cookie has been closed. @raise Sys_error if there was an operating system error. *) val compile : t -> string list -> unit (** [compile cookie filenames] compiles the the list of database files [filenames], or [] for the default database. The compiled files created are named from the basename(1) of each file argument with ".mgc" appended to it. @raise Invalid_argument if the cookie has been closed. @raise Sys_error if there was an operating system error. *) val check : t -> string list -> bool (** [check cookie filenames] checks the validity of entries in the database files [filenames], or [] for the default database. @raise Invalid_argument if the cookie has been closed. *) ocaml-magic-0.7.3/examples/0000755000175000017500000000000010771673031014177 5ustar trchtrchocaml-magic-0.7.3/examples/file.ml0000644000175000017500000000217410771470474015462 0ustar trchtrch(* File: file.ml Copyright (C) 2005-2008 Christophe Troestler email: chris_77@users.sourceforge.net WWW: http://www.umh.ac.be/math/an/software/ This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License version 2.1 as published by the Free Software Foundation, with the special exception on linking described in file LICENSE. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the file LICENSE for more details. *) (* $Id: file.ml,v 1.2 2008/03/23 15:03:24 chris_77 Exp $ *) (** "file" program using OCaml libmagic bindings. *) let () = if Array.length Sys.argv < 2 then begin print_endline(Sys.argv.(0) ^ " "); exit 0; end; try let c = Magic.create [] in let fname = Sys.argv.(1) in print_endline(fname ^ ": " ^ Magic.file c fname) with | Magic.Failure m -> print_endline("Magic.Failure(" ^ m ^ ")") | Sys_error m -> print_endline("Sys_error(" ^ m ^ ")") ocaml-magic-0.7.3/examples/Makefile.in0000644000175000017500000000117010771470042016240 0ustar trchtrch# -*-makefile-gmake-*- export OCAMLMAKEFILE = ../OCamlMakefile export INCDIRS = ../src @INC@ export LIBS = @all_requires@ magic # "file" example define PROJ_file SOURCES = file.ml RESULT = file endef export PROJ_file # Use these, if the environment does not define subprojects to handle: ifndef SUBPROJS export SUBPROJS = file endif .PHONY: all byte opt all: @BEST@ byte: byte-code opt: native-code export OCAMLC = @OCAMLC@ export OCAMLOPT = @OCAMLOPT@ export TRASH += $(wildcard *~) # Catch-all target will be applied to all subprojects automatically %: @$(MAKE) -f $(OCAMLMAKEFILE) subprojs SUBTARGET=$@ ocaml-magic-0.7.3/examples/test.ml0000644000175000017500000000114610771540617015515 0ustar trchtrch(* Magic script to execute in the toplevel *) #directory "../src";; #load "magic.cma";; open Printf;; printf "\n**********OCaml script starts*************************\n%!";; (* let c = Magic.make ["/usr/share/file/magic"];; *) let c = Magic.make [];; let m1 = Magic.file c "../src/dllmagic_stubs.so";; let m2 = Magic.file c "file.ml";; let m3 = Magic.file c "/dev/null";; let m4 = Magic.file c "xxx";; let m5 = Magic.file c "../src/magic.cmxa";; Magic.load c ["/etc/magic"];; (* usually empty *) Magic.load c ["/usr/share/file/magic"];; Magic.load c ["/usr/share/file/magic.mime"];; Magic.close c;; ocaml-magic-0.7.3/OCamlMakefile0000644000175000017500000010130210771432241014726 0ustar trchtrch########################################################################### # OCamlMakefile # Copyright (C) 1999-2007 Markus Mottl # # For updates see: # http://www.ocaml.info/home/ocaml_sources.html # ########################################################################### # Modified by damien for .glade.ml compilation # Set these variables to the names of the sources to be processed and # the result variable. Order matters during linkage! ifndef SOURCES SOURCES := foo.ml endif export SOURCES ifndef RES_CLIB_SUF RES_CLIB_SUF := _stubs endif export RES_CLIB_SUF ifndef RESULT RESULT := foo endif export RESULT := $(strip $(RESULT)) export LIB_PACK_NAME ifndef DOC_FILES DOC_FILES := $(filter %.mli, $(SOURCES)) endif export DOC_FILES FIRST_DOC_FILE := $(firstword $(DOC_FILES)) export BCSUFFIX export NCSUFFIX ifndef TOPSUFFIX TOPSUFFIX := .top endif export TOPSUFFIX # Eventually set include- and library-paths, libraries to link, # additional compilation-, link- and ocamlyacc-flags # Path- and library information needs not be written with "-I" and such... # Define THREADS if you need it, otherwise leave it unset (same for # USE_CAMLP4)! export THREADS export VMTHREADS export ANNOTATE export USE_CAMLP4 export INCDIRS export LIBDIRS export EXTLIBDIRS export RESULTDEPS export OCAML_DEFAULT_DIRS export LIBS export CLIBS export CFRAMEWORKS export OCAMLFLAGS export OCAMLNCFLAGS export OCAMLBCFLAGS export OCAMLLDFLAGS export OCAMLNLDFLAGS export OCAMLBLDFLAGS export OCAMLMKLIB_FLAGS ifndef OCAMLCPFLAGS OCAMLCPFLAGS := a endif export OCAMLCPFLAGS ifndef DOC_DIR DOC_DIR := doc endif export DOC_DIR export PPFLAGS export LFLAGS export YFLAGS export IDLFLAGS export OCAMLDOCFLAGS export OCAMLFIND_INSTFLAGS export DVIPSFLAGS export STATIC # Add a list of optional trash files that should be deleted by "make clean" export TRASH ECHO := echo ifdef REALLY_QUIET export REALLY_QUIET ECHO := true LFLAGS := $(LFLAGS) -q YFLAGS := $(YFLAGS) -q endif #################### variables depending on your OCaml-installation ifdef MINGW export MINGW WIN32 := 1 CFLAGS_WIN32 := -mno-cygwin endif ifdef MSVC export MSVC WIN32 := 1 ifndef STATIC CPPFLAGS_WIN32 := -DCAML_DLL endif CFLAGS_WIN32 += -nologo EXT_OBJ := obj EXT_LIB := lib ifeq ($(CC),gcc) # work around GNU Make default value ifdef THREADS CC := cl -MT else CC := cl endif endif ifeq ($(CXX),g++) # work around GNU Make default value CXX := $(CC) endif CFLAG_O := -Fo endif ifdef WIN32 EXT_CXX := cpp EXE := .exe endif ifndef EXT_OBJ EXT_OBJ := o endif ifndef EXT_LIB EXT_LIB := a endif ifndef EXT_CXX EXT_CXX := cc endif ifndef EXE EXE := # empty endif ifndef CFLAG_O CFLAG_O := -o # do not delete this comment (preserves trailing whitespace)! endif export CC export CXX export CFLAGS export CXXFLAGS export LDFLAGS export CPPFLAGS ifndef RPATH_FLAG ifdef ELF_RPATH_FLAG RPATH_FLAG := $(ELF_RPATH_FLAG) else RPATH_FLAG := -R endif endif export RPATH_FLAG ifndef MSVC ifndef PIC_CFLAGS PIC_CFLAGS := -fPIC endif ifndef PIC_CPPFLAGS PIC_CPPFLAGS := -DPIC endif endif export PIC_CFLAGS export PIC_CPPFLAGS BCRESULT := $(addsuffix $(BCSUFFIX), $(RESULT)) NCRESULT := $(addsuffix $(NCSUFFIX), $(RESULT)) TOPRESULT := $(addsuffix $(TOPSUFFIX), $(RESULT)) ifndef OCAMLFIND OCAMLFIND := ocamlfind endif export OCAMLFIND ifndef OCAMLC OCAMLC := ocamlc endif export OCAMLC ifndef OCAMLOPT OCAMLOPT := ocamlopt endif export OCAMLOPT ifndef OCAMLMKTOP OCAMLMKTOP := ocamlmktop endif export OCAMLMKTOP ifndef OCAMLCP OCAMLCP := ocamlcp endif export OCAMLCP ifndef OCAMLDEP OCAMLDEP := ocamldep endif export OCAMLDEP ifndef OCAMLLEX OCAMLLEX := ocamllex endif export OCAMLLEX ifndef OCAMLYACC OCAMLYACC := ocamlyacc endif export OCAMLYACC ifndef OCAMLMKLIB OCAMLMKLIB := ocamlmklib endif export OCAMLMKLIB ifndef OCAML_GLADECC OCAML_GLADECC := lablgladecc2 endif export OCAML_GLADECC ifndef OCAML_GLADECC_FLAGS OCAML_GLADECC_FLAGS := endif export OCAML_GLADECC_FLAGS ifndef CAMELEON_REPORT CAMELEON_REPORT := report endif export CAMELEON_REPORT ifndef CAMELEON_REPORT_FLAGS CAMELEON_REPORT_FLAGS := endif export CAMELEON_REPORT_FLAGS ifndef CAMELEON_ZOGGY CAMELEON_ZOGGY := camlp4o pa_zog.cma pr_o.cmo endif export CAMELEON_ZOGGY ifndef CAMELEON_ZOGGY_FLAGS CAMELEON_ZOGGY_FLAGS := endif export CAMELEON_ZOGGY_FLAGS ifndef OXRIDL OXRIDL := oxridl endif export OXRIDL ifndef CAMLIDL CAMLIDL := camlidl endif export CAMLIDL ifndef CAMLIDLDLL CAMLIDLDLL := camlidldll endif export CAMLIDLDLL ifndef NOIDLHEADER MAYBE_IDL_HEADER := -header endif export NOIDLHEADER export NO_CUSTOM ifndef CAMLP4 CAMLP4 := camlp4 endif export CAMLP4 ifndef REAL_OCAMLFIND ifdef PACKS ifndef CREATE_LIB ifdef THREADS PACKS += threads endif endif empty := space := $(empty) $(empty) comma := , ifdef PREDS PRE_OCAML_FIND_PREDICATES := $(subst $(space),$(comma),$(PREDS)) PRE_OCAML_FIND_PACKAGES := $(subst $(space),$(comma),$(PACKS)) OCAML_FIND_PREDICATES := -predicates $(PRE_OCAML_FIND_PREDICATES) # OCAML_DEP_PREDICATES := -syntax $(PRE_OCAML_FIND_PREDICATES) OCAML_FIND_PACKAGES := $(OCAML_FIND_PREDICATES) -package $(PRE_OCAML_FIND_PACKAGES) OCAML_DEP_PACKAGES := $(OCAML_DEP_PREDICATES) -package $(PRE_OCAML_FIND_PACKAGES) else OCAML_FIND_PACKAGES := -package $(subst $(space),$(comma),$(PACKS)) OCAML_DEP_PACKAGES := endif OCAML_FIND_LINKPKG := -linkpkg REAL_OCAMLFIND := $(OCAMLFIND) endif endif export OCAML_FIND_PACKAGES export OCAML_DEP_PACKAGES export OCAML_FIND_LINKPKG export REAL_OCAMLFIND ifndef OCAMLDOC OCAMLDOC := ocamldoc endif export OCAMLDOC ifndef LATEX LATEX := latex endif export LATEX ifndef DVIPS DVIPS := dvips endif export DVIPS ifndef PS2PDF PS2PDF := ps2pdf endif export PS2PDF ifndef OCAMLMAKEFILE OCAMLMAKEFILE := OCamlMakefile endif export OCAMLMAKEFILE ifndef OCAMLLIBPATH OCAMLLIBPATH := \ $(shell $(OCAMLC) 2>/dev/null -where || echo /usr/local/lib/ocaml) endif export OCAMLLIBPATH ifndef OCAML_LIB_INSTALL OCAML_LIB_INSTALL := $(OCAMLLIBPATH)/contrib endif export OCAML_LIB_INSTALL ########################################################################### #################### change following sections only if #################### you know what you are doing! # delete target files when a build command fails .PHONY: .DELETE_ON_ERROR .DELETE_ON_ERROR: # for pedants using "--warn-undefined-variables" export MAYBE_IDL export REAL_RESULT export CAMLIDLFLAGS export THREAD_FLAG export RES_CLIB export MAKEDLL export ANNOT_FLAG export C_OXRIDL export SUBPROJS export CFLAGS_WIN32 export CPPFLAGS_WIN32 INCFLAGS := SHELL := /bin/sh MLDEPDIR := ._d BCDIDIR := ._bcdi NCDIDIR := ._ncdi FILTER_EXTNS := %.mli %.ml %.mll %.mly %.idl %.oxridl %.c %.m %.$(EXT_CXX) %.rep %.zog %.glade FILTERED := $(filter $(FILTER_EXTNS), $(SOURCES)) SOURCE_DIRS := $(filter-out ./, $(sort $(dir $(FILTERED)))) FILTERED_REP := $(filter %.rep, $(FILTERED)) DEP_REP := $(FILTERED_REP:%.rep=$(MLDEPDIR)/%.d) AUTO_REP := $(FILTERED_REP:.rep=.ml) FILTERED_ZOG := $(filter %.zog, $(FILTERED)) DEP_ZOG := $(FILTERED_ZOG:%.zog=$(MLDEPDIR)/%.d) AUTO_ZOG := $(FILTERED_ZOG:.zog=.ml) FILTERED_GLADE := $(filter %.glade, $(FILTERED)) DEP_GLADE := $(FILTERED_GLADE:%.glade=$(MLDEPDIR)/%.d) AUTO_GLADE := $(FILTERED_GLADE:.glade=.ml) FILTERED_ML := $(filter %.ml, $(FILTERED)) DEP_ML := $(FILTERED_ML:%.ml=$(MLDEPDIR)/%.d) FILTERED_MLI := $(filter %.mli, $(FILTERED)) DEP_MLI := $(FILTERED_MLI:.mli=.di) FILTERED_MLL := $(filter %.mll, $(FILTERED)) DEP_MLL := $(FILTERED_MLL:%.mll=$(MLDEPDIR)/%.d) AUTO_MLL := $(FILTERED_MLL:.mll=.ml) FILTERED_MLY := $(filter %.mly, $(FILTERED)) DEP_MLY := $(FILTERED_MLY:%.mly=$(MLDEPDIR)/%.d) $(FILTERED_MLY:.mly=.di) AUTO_MLY := $(FILTERED_MLY:.mly=.mli) $(FILTERED_MLY:.mly=.ml) FILTERED_IDL := $(filter %.idl, $(FILTERED)) DEP_IDL := $(FILTERED_IDL:%.idl=$(MLDEPDIR)/%.d) $(FILTERED_IDL:.idl=.di) C_IDL := $(FILTERED_IDL:%.idl=%_stubs.c) ifndef NOIDLHEADER C_IDL += $(FILTERED_IDL:.idl=.h) endif OBJ_C_IDL := $(FILTERED_IDL:%.idl=%_stubs.$(EXT_OBJ)) AUTO_IDL := $(FILTERED_IDL:.idl=.mli) $(FILTERED_IDL:.idl=.ml) $(C_IDL) FILTERED_OXRIDL := $(filter %.oxridl, $(FILTERED)) DEP_OXRIDL := $(FILTERED_OXRIDL:%.oxridl=$(MLDEPDIR)/%.d) $(FILTERED_OXRIDL:.oxridl=.di) AUTO_OXRIDL := $(FILTERED_OXRIDL:.oxridl=.mli) $(FILTERED_OXRIDL:.oxridl=.ml) $(C_OXRIDL) FILTERED_C_CXX := $(filter %.c %.m %.$(EXT_CXX), $(FILTERED)) OBJ_C_CXX := $(FILTERED_C_CXX:.c=.$(EXT_OBJ)) OBJ_C_CXX := $(OBJ_C_CXX:.m=.$(EXT_OBJ)) OBJ_C_CXX := $(OBJ_C_CXX:.$(EXT_CXX)=.$(EXT_OBJ)) PRE_TARGETS += $(AUTO_MLL) $(AUTO_MLY) $(AUTO_IDL) $(AUTO_OXRIDL) $(AUTO_ZOG) $(AUTO_REP) $(AUTO_GLADE) ALL_DEPS := $(DEP_ML) $(DEP_MLI) $(DEP_MLL) $(DEP_MLY) $(DEP_IDL) $(DEP_OXRIDL) $(DEP_ZOG) $(DEP_REP) $(DEP_GLADE) MLDEPS := $(filter %.d, $(ALL_DEPS)) MLIDEPS := $(filter %.di, $(ALL_DEPS)) BCDEPIS := $(MLIDEPS:%.di=$(BCDIDIR)/%.di) NCDEPIS := $(MLIDEPS:%.di=$(NCDIDIR)/%.di) ALLML := $(filter %.mli %.ml %.mll %.mly %.idl %.oxridl %.rep %.zog %.glade, $(FILTERED)) IMPLO_INTF := $(ALLML:%.mli=%.mli.__) IMPLO_INTF := $(foreach file, $(IMPLO_INTF), \ $(basename $(file)).cmi $(basename $(file)).cmo) IMPLO_INTF := $(filter-out %.mli.cmo, $(IMPLO_INTF)) IMPLO_INTF := $(IMPLO_INTF:%.mli.cmi=%.cmi) IMPLX_INTF := $(IMPLO_INTF:.cmo=.cmx) INTF := $(filter %.cmi, $(IMPLO_INTF)) IMPL_CMO := $(filter %.cmo, $(IMPLO_INTF)) IMPL_CMX := $(IMPL_CMO:.cmo=.cmx) IMPL_ASM := $(IMPL_CMO:.cmo=.asm) IMPL_S := $(IMPL_CMO:.cmo=.s) OBJ_LINK := $(OBJ_C_IDL) $(OBJ_C_CXX) OBJ_FILES := $(IMPL_CMO:.cmo=.$(EXT_OBJ)) $(OBJ_LINK) EXECS := $(addsuffix $(EXE), \ $(sort $(TOPRESULT) $(BCRESULT) $(NCRESULT))) ifdef WIN32 EXECS += $(BCRESULT).dll $(NCRESULT).dll endif CLIB_BASE := $(RESULT)$(RES_CLIB_SUF) ifneq ($(strip $(OBJ_LINK)),) RES_CLIB := lib$(CLIB_BASE).$(EXT_LIB) endif ifdef WIN32 DLLSONAME := $(CLIB_BASE).dll else DLLSONAME := dll$(CLIB_BASE).so endif NONEXECS := $(INTF) $(IMPL_CMO) $(IMPL_CMX) $(IMPL_ASM) $(IMPL_S) \ $(OBJ_FILES) $(PRE_TARGETS) $(BCRESULT).cma $(NCRESULT).cmxa \ $(NCRESULT).$(EXT_LIB) $(BCRESULT).cmi $(BCRESULT).cmo \ $(NCRESULT).cmi $(NCRESULT).cmx $(NCRESULT).o \ $(RES_CLIB) $(IMPL_CMO:.cmo=.annot) \ $(LIB_PACK_NAME).cmi $(LIB_PACK_NAME).cmo $(LIB_PACK_NAME).cmx $(LIB_PACK_NAME).o ifndef STATIC NONEXECS += $(DLLSONAME) endif ifndef LIBINSTALL_FILES LIBINSTALL_FILES := $(RESULT).mli $(RESULT).cmi $(RESULT).cma \ $(RESULT).cmxa $(RESULT).$(EXT_LIB) $(RES_CLIB) ifndef STATIC ifneq ($(strip $(OBJ_LINK)),) LIBINSTALL_FILES += $(DLLSONAME) endif endif endif export LIBINSTALL_FILES ifdef WIN32 # some extra stuff is created while linking DLLs NONEXECS += $(BCRESULT).$(EXT_LIB) $(BCRESULT).exp $(NCRESULT).exp $(CLIB_BASE).exp $(CLIB_BASE).lib endif TARGETS := $(EXECS) $(NONEXECS) # If there are IDL-files ifneq ($(strip $(FILTERED_IDL)),) MAYBE_IDL := -cclib -lcamlidl endif ifdef USE_CAMLP4 CAMLP4PATH := \ $(shell $(CAMLP4) -where 2>/dev/null || echo /usr/local/lib/camlp4) INCFLAGS := -I $(CAMLP4PATH) CINCFLAGS := -I$(CAMLP4PATH) endif DINCFLAGS := $(INCFLAGS) $(SOURCE_DIRS:%=-I %) $(OCAML_DEFAULT_DIRS:%=-I %) INCFLAGS := $(DINCFLAGS) $(INCDIRS:%=-I %) CINCFLAGS += $(SOURCE_DIRS:%=-I%) $(INCDIRS:%=-I%) $(OCAML_DEFAULT_DIRS:%=-I%) ifndef MSVC CLIBFLAGS += $(SOURCE_DIRS:%=-L%) $(LIBDIRS:%=-L%) \ $(EXTLIBDIRS:%=-L%) $(OCAML_DEFAULT_DIRS:%=-L%) ifeq ($(ELF_RPATH), yes) CLIBFLAGS += $(EXTLIBDIRS:%=-Wl,$(RPATH_FLAG)%) endif endif ifndef PROFILING INTF_OCAMLC := $(OCAMLC) else ifndef THREADS INTF_OCAMLC := $(OCAMLCP) -p $(OCAMLCPFLAGS) else # OCaml does not support profiling byte code # with threads (yet), therefore we force an error. ifndef REAL_OCAMLC $(error Profiling of multithreaded byte code not yet supported by OCaml) endif INTF_OCAMLC := $(OCAMLC) endif endif ifndef MSVC COMMON_LDFLAGS := $(LDFLAGS:%=-ccopt %) $(SOURCE_DIRS:%=-ccopt -L%) \ $(LIBDIRS:%=-ccopt -L%) $(EXTLIBDIRS:%=-ccopt -L%) \ $(EXTLIBDIRS:%=-ccopt -Wl $(OCAML_DEFAULT_DIRS:%=-ccopt -L%)) ifeq ($(ELF_RPATH),yes) COMMON_LDFLAGS += $(EXTLIBDIRS:%=-ccopt -Wl,$(RPATH_FLAG)%) endif else COMMON_LDFLAGS := -ccopt "/link -NODEFAULTLIB:LIBC $(LDFLAGS:%=%) $(SOURCE_DIRS:%=-LIBPATH:%) \ $(LIBDIRS:%=-LIBPATH:%) $(EXTLIBDIRS:%=-LIBPATH:%) \ $(OCAML_DEFAULT_DIRS:%=-LIBPATH:%) " endif CLIBS_OPTS := $(CLIBS:%=-cclib -l%) $(CFRAMEWORKS:%=-cclib '-framework %') ifdef MSVC ifndef STATIC # MSVC libraries do not have 'lib' prefix CLIBS_OPTS := $(CLIBS:%=-cclib %.lib) endif endif ifneq ($(strip $(OBJ_LINK)),) ifdef CREATE_LIB OBJS_LIBS := -cclib -l$(CLIB_BASE) $(CLIBS_OPTS) $(MAYBE_IDL) else OBJS_LIBS := $(OBJ_LINK) $(CLIBS_OPTS) $(MAYBE_IDL) endif else OBJS_LIBS := $(CLIBS_OPTS) $(MAYBE_IDL) endif # If we have to make byte-code ifndef REAL_OCAMLC BYTE_OCAML := y # EXTRADEPS is added dependencies we have to insert for all # executable files we generate. Ideally it should be all of the # libraries we use, but it's hard to find the ones that get searched on # the path since I don't know the paths built into the compiler, so # just include the ones with slashes in their names. EXTRADEPS := $(addsuffix .cma,$(foreach i,$(LIBS),$(if $(findstring /,$(i)),$(i)))) SPECIAL_OCAMLFLAGS := $(OCAMLBCFLAGS) REAL_OCAMLC := $(INTF_OCAMLC) REAL_IMPL := $(IMPL_CMO) REAL_IMPL_INTF := $(IMPLO_INTF) IMPL_SUF := .cmo DEPFLAGS := MAKE_DEPS := $(MLDEPS) $(BCDEPIS) ifdef CREATE_LIB override CFLAGS := $(PIC_CFLAGS) $(CFLAGS) override CPPFLAGS := $(PIC_CPPFLAGS) $(CPPFLAGS) ifndef STATIC ifneq ($(strip $(OBJ_LINK)),) MAKEDLL := $(DLLSONAME) ALL_LDFLAGS := -dllib $(DLLSONAME) endif endif endif ifndef NO_CUSTOM ifneq "$(strip $(OBJ_LINK) $(THREADS) $(MAYBE_IDL) $(CLIBS) $(CFRAMEWORKS))" "" ALL_LDFLAGS += -custom endif endif ALL_LDFLAGS += $(INCFLAGS) $(OCAMLLDFLAGS) $(OCAMLBLDFLAGS) \ $(COMMON_LDFLAGS) $(LIBS:%=%.cma) CAMLIDLDLLFLAGS := ifdef THREADS ifdef VMTHREADS THREAD_FLAG := -vmthread else THREAD_FLAG := -thread endif ALL_LDFLAGS := $(THREAD_FLAG) $(ALL_LDFLAGS) ifndef CREATE_LIB ifndef REAL_OCAMLFIND ALL_LDFLAGS := unix.cma threads.cma $(ALL_LDFLAGS) endif endif endif # we have to make native-code else EXTRADEPS := $(addsuffix .cmxa,$(foreach i,$(LIBS),$(if $(findstring /,$(i)),$(i)))) ifndef PROFILING SPECIAL_OCAMLFLAGS := $(OCAMLNCFLAGS) PLDFLAGS := else SPECIAL_OCAMLFLAGS := -p $(OCAMLNCFLAGS) PLDFLAGS := -p endif REAL_IMPL := $(IMPL_CMX) REAL_IMPL_INTF := $(IMPLX_INTF) IMPL_SUF := .cmx override CPPFLAGS := -DNATIVE_CODE $(CPPFLAGS) DEPFLAGS := -native MAKE_DEPS := $(MLDEPS) $(NCDEPIS) ALL_LDFLAGS := $(PLDFLAGS) $(INCFLAGS) $(OCAMLLDFLAGS) \ $(OCAMLNLDFLAGS) $(COMMON_LDFLAGS) CAMLIDLDLLFLAGS := -opt ifndef CREATE_LIB ALL_LDFLAGS += $(LIBS:%=%.cmxa) else override CFLAGS := $(PIC_CFLAGS) $(CFLAGS) override CPPFLAGS := $(PIC_CPPFLAGS) $(CPPFLAGS) endif ifdef THREADS THREAD_FLAG := -thread ALL_LDFLAGS := $(THREAD_FLAG) $(ALL_LDFLAGS) ifndef CREATE_LIB ifndef REAL_OCAMLFIND ALL_LDFLAGS := unix.cmxa threads.cmxa $(ALL_LDFLAGS) endif endif endif endif export MAKE_DEPS ifdef ANNOTATE ANNOT_FLAG := -dtypes else endif ALL_OCAMLCFLAGS := $(THREAD_FLAG) $(ANNOT_FLAG) $(OCAMLFLAGS) \ $(INCFLAGS) $(SPECIAL_OCAMLFLAGS) ifdef make_deps -include $(MAKE_DEPS) PRE_TARGETS := endif ########################################################################### # USER RULES # Call "OCamlMakefile QUIET=" to get rid of all of the @'s. QUIET=@ # generates byte-code (default) byte-code: $(PRE_TARGETS) $(QUIET)$(MAKE) -r -f $(OCAMLMAKEFILE) $(BCRESULT) \ REAL_RESULT="$(BCRESULT)" make_deps=yes bc: byte-code byte-code-nolink: $(PRE_TARGETS) $(QUIET)$(MAKE) -r -f $(OCAMLMAKEFILE) nolink \ REAL_RESULT="$(BCRESULT)" make_deps=yes bcnl: byte-code-nolink top: $(PRE_TARGETS) $(QUIET)$(MAKE) -r -f $(OCAMLMAKEFILE) $(TOPRESULT) \ REAL_RESULT="$(BCRESULT)" make_deps=yes # generates native-code native-code: $(PRE_TARGETS) $(QUIET)$(MAKE) -r -f $(OCAMLMAKEFILE) $(NCRESULT) \ REAL_RESULT="$(NCRESULT)" \ REAL_OCAMLC="$(OCAMLOPT)" \ make_deps=yes nc: native-code native-code-nolink: $(PRE_TARGETS) $(QUIET)$(MAKE) -r -f $(OCAMLMAKEFILE) nolink \ REAL_RESULT="$(NCRESULT)" \ REAL_OCAMLC="$(OCAMLOPT)" \ make_deps=yes ncnl: native-code-nolink # generates byte-code libraries byte-code-library: $(PRE_TARGETS) $(QUIET)$(MAKE) -r -f $(OCAMLMAKEFILE) \ $(RES_CLIB) $(BCRESULT).cma \ REAL_RESULT="$(BCRESULT)" \ CREATE_LIB=yes \ make_deps=yes bcl: byte-code-library # generates native-code libraries native-code-library: $(PRE_TARGETS) $(QUIET)$(MAKE) -r -f $(OCAMLMAKEFILE) \ $(RES_CLIB) $(NCRESULT).cmxa \ REAL_RESULT="$(NCRESULT)" \ REAL_OCAMLC="$(OCAMLOPT)" \ CREATE_LIB=yes \ make_deps=yes ncl: native-code-library ifdef WIN32 # generates byte-code dll byte-code-dll: $(PRE_TARGETS) $(QUIET)$(MAKE) -r -f $(OCAMLMAKEFILE) \ $(RES_CLIB) $(BCRESULT).dll \ REAL_RESULT="$(BCRESULT)" \ make_deps=yes bcd: byte-code-dll # generates native-code dll native-code-dll: $(PRE_TARGETS) $(QUIET)$(MAKE) -r -f $(OCAMLMAKEFILE) \ $(RES_CLIB) $(NCRESULT).dll \ REAL_RESULT="$(NCRESULT)" \ REAL_OCAMLC="$(OCAMLOPT)" \ make_deps=yes ncd: native-code-dll endif # generates byte-code with debugging information debug-code: $(PRE_TARGETS) $(QUIET)$(MAKE) -r -f $(OCAMLMAKEFILE) $(BCRESULT) \ REAL_RESULT="$(BCRESULT)" make_deps=yes \ OCAMLFLAGS="-g $(OCAMLFLAGS)" \ OCAMLLDFLAGS="-g $(OCAMLLDFLAGS)" dc: debug-code debug-code-nolink: $(PRE_TARGETS) $(QUIET)$(MAKE) -r -f $(OCAMLMAKEFILE) nolink \ REAL_RESULT="$(BCRESULT)" make_deps=yes \ OCAMLFLAGS="-g $(OCAMLFLAGS)" \ OCAMLLDFLAGS="-g $(OCAMLLDFLAGS)" dcnl: debug-code-nolink # generates byte-code with debugging information (native code) debug-native-code: $(PRE_TARGETS) $(QUIET)$(MAKE) -r -f $(OCAMLMAKEFILE) $(NCRESULT) \ REAL_RESULT="$(NCRESULT)" make_deps=yes \ REAL_OCAMLC="$(OCAMLOPT)" \ OCAMLFLAGS="-g $(OCAMLFLAGS)" \ OCAMLLDFLAGS="-g $(OCAMLLDFLAGS)" dnc: debug-native-code debug-native-code-nolink: $(PRE_TARGETS) $(QUIET)$(MAKE) -r -f $(OCAMLMAKEFILE) nolink \ REAL_RESULT="$(NCRESULT)" make_deps=yes \ REAL_OCAMLC="$(OCAMLOPT)" \ OCAMLFLAGS="-g $(OCAMLFLAGS)" \ OCAMLLDFLAGS="-g $(OCAMLLDFLAGS)" dncnl: debug-native-code-nolink # generates byte-code libraries with debugging information debug-code-library: $(PRE_TARGETS) $(QUIET)$(MAKE) -r -f $(OCAMLMAKEFILE) \ $(RES_CLIB) $(BCRESULT).cma \ REAL_RESULT="$(BCRESULT)" make_deps=yes \ CREATE_LIB=yes \ OCAMLFLAGS="-g $(OCAMLFLAGS)" \ OCAMLLDFLAGS="-g $(OCAMLLDFLAGS)" dcl: debug-code-library # generates byte-code libraries with debugging information (native code) debug-native-code-library: $(PRE_TARGETS) $(QUIET)$(MAKE) -r -f $(OCAMLMAKEFILE) \ $(RES_CLIB) $(NCRESULT).cma \ REAL_RESULT="$(NCRESULT)" make_deps=yes \ REAL_OCAMLC="$(OCAMLOPT)" \ CREATE_LIB=yes \ OCAMLFLAGS="-g $(OCAMLFLAGS)" \ OCAMLLDFLAGS="-g $(OCAMLLDFLAGS)" dncl: debug-native-code-library # generates byte-code for profiling profiling-byte-code: $(PRE_TARGETS) $(QUIET)$(MAKE) -r -f $(OCAMLMAKEFILE) $(BCRESULT) \ REAL_RESULT="$(BCRESULT)" PROFILING="y" \ make_deps=yes pbc: profiling-byte-code # generates native-code profiling-native-code: $(PRE_TARGETS) $(QUIET)$(MAKE) -r -f $(OCAMLMAKEFILE) $(NCRESULT) \ REAL_RESULT="$(NCRESULT)" \ REAL_OCAMLC="$(OCAMLOPT)" \ PROFILING="y" \ make_deps=yes pnc: profiling-native-code # generates byte-code libraries profiling-byte-code-library: $(PRE_TARGETS) $(QUIET)$(MAKE) -r -f $(OCAMLMAKEFILE) \ $(RES_CLIB) $(BCRESULT).cma \ REAL_RESULT="$(BCRESULT)" PROFILING="y" \ CREATE_LIB=yes \ make_deps=yes pbcl: profiling-byte-code-library # generates native-code libraries profiling-native-code-library: $(PRE_TARGETS) $(QUIET)$(MAKE) -r -f $(OCAMLMAKEFILE) \ $(RES_CLIB) $(NCRESULT).cmxa \ REAL_RESULT="$(NCRESULT)" PROFILING="y" \ REAL_OCAMLC="$(OCAMLOPT)" \ CREATE_LIB=yes \ make_deps=yes pncl: profiling-native-code-library # packs byte-code objects pack-byte-code: $(PRE_TARGETS) $(QUIET)$(MAKE) -r -f $(OCAMLMAKEFILE) $(BCRESULT).cmo \ REAL_RESULT="$(BCRESULT)" \ PACK_LIB=yes make_deps=yes pabc: pack-byte-code # packs native-code objects pack-native-code: $(PRE_TARGETS) $(QUIET)$(MAKE) -r -f $(OCAMLMAKEFILE) \ $(NCRESULT).cmx $(NCRESULT).o \ REAL_RESULT="$(NCRESULT)" \ REAL_OCAMLC="$(OCAMLOPT)" \ PACK_LIB=yes make_deps=yes panc: pack-native-code # generates HTML-documentation htdoc: $(DOC_DIR)/$(RESULT)/html/index.html # generates Latex-documentation ladoc: $(DOC_DIR)/$(RESULT)/latex/doc.tex # generates PostScript-documentation psdoc: $(DOC_DIR)/$(RESULT)/latex/doc.ps # generates PDF-documentation pdfdoc: $(DOC_DIR)/$(RESULT)/latex/doc.pdf # generates all supported forms of documentation doc: htdoc ladoc psdoc pdfdoc ########################################################################### # LOW LEVEL RULES $(REAL_RESULT): $(REAL_IMPL_INTF) $(OBJ_LINK) $(EXTRADEPS) $(RESULTDEPS) $(REAL_OCAMLFIND) $(REAL_OCAMLC) \ $(OCAML_FIND_PACKAGES) $(OCAML_FIND_LINKPKG) \ $(ALL_LDFLAGS) $(OBJS_LIBS) -o $@$(EXE) \ $(REAL_IMPL) nolink: $(REAL_IMPL_INTF) $(OBJ_LINK) ifdef WIN32 $(REAL_RESULT).dll: $(REAL_IMPL_INTF) $(OBJ_LINK) $(CAMLIDLDLL) $(CAMLIDLDLLFLAGS) $(OBJ_LINK) $(CLIBS) \ -o $@ $(REAL_IMPL) endif %$(TOPSUFFIX): $(REAL_IMPL_INTF) $(OBJ_LINK) $(EXTRADEPS) $(REAL_OCAMLFIND) $(OCAMLMKTOP) \ $(OCAML_FIND_PACKAGES) $(OCAML_FIND_LINKPKG) \ $(ALL_LDFLAGS) $(OBJS_LIBS) -o $@$(EXE) \ $(REAL_IMPL) .SUFFIXES: .mli .ml .cmi .cmo .cmx .cma .cmxa .$(EXT_OBJ) \ .mly .di .d .$(EXT_LIB) .idl %.oxridl .c .m .$(EXT_CXX) .h .so \ .rep .zog .glade ifndef STATIC ifdef MINGW $(DLLSONAME): $(OBJ_LINK) $(CC) $(CFLAGS) $(CFLAGS_WIN32) $(OBJ_LINK) -shared -o $@ \ -Wl,--whole-archive $(wildcard $(foreach dir,$(LIBDIRS),$(CLIBS:%=$(dir)/lib%.a))) \ $(OCAMLLIBPATH)/ocamlrun.a \ -Wl,--export-all-symbols \ -Wl,--no-whole-archive else ifdef MSVC $(DLLSONAME): $(OBJ_LINK) link /NOLOGO /DLL /OUT:$@ $(OBJ_LINK) \ $(wildcard $(foreach dir,$(LIBDIRS),$(CLIBS:%=$(dir)/%.lib))) \ $(OCAMLLIBPATH)/ocamlrun.lib else $(DLLSONAME): $(OBJ_LINK) $(OCAMLMKLIB) $(INCFLAGS) $(CLIBFLAGS) \ -o $(CLIB_BASE) $(OBJ_LINK) $(CLIBS:%=-l%) $(CFRAMEWORKS:%=-framework %) \ $(OCAMLMKLIB_FLAGS) endif endif endif ifndef LIB_PACK_NAME $(RESULT).cma: $(REAL_IMPL_INTF) $(MAKEDLL) $(EXTRADEPS) $(RESULTDEPS) $(REAL_OCAMLFIND) $(REAL_OCAMLC) -a $(ALL_LDFLAGS) $(OBJS_LIBS) -o $@ $(REAL_IMPL) $(RESULT).cmxa $(RESULT).$(EXT_LIB): $(REAL_IMPL_INTF) $(EXTRADEPS) $(RESULTDEPS) $(REAL_OCAMLFIND) $(OCAMLOPT) -a $(ALL_LDFLAGS) $(OBJS_LIBS) -o $@ $(REAL_IMPL) else ifdef BYTE_OCAML $(LIB_PACK_NAME).cmi $(LIB_PACK_NAME).cmo: $(REAL_IMPL_INTF) $(REAL_OCAMLFIND) $(REAL_OCAMLC) -pack -o $(LIB_PACK_NAME).cmo $(OCAMLLDFLAGS) $(REAL_IMPL) else $(LIB_PACK_NAME).cmi $(LIB_PACK_NAME).cmx: $(REAL_IMPL_INTF) $(REAL_OCAMLFIND) $(OCAMLOPT) -pack -o $(LIB_PACK_NAME).cmx $(OCAMLLDFLAGS) $(REAL_IMPL) endif $(RESULT).cma: $(LIB_PACK_NAME).cmi $(LIB_PACK_NAME).cmo $(MAKEDLL) $(EXTRADEPS) $(RESULTDEPS) $(REAL_OCAMLFIND) $(REAL_OCAMLC) -a $(ALL_LDFLAGS) $(OBJS_LIBS) -o $@ $(LIB_PACK_NAME).cmo $(RESULT).cmxa $(RESULT).$(EXT_LIB): $(LIB_PACK_NAME).cmi $(LIB_PACK_NAME).cmx $(EXTRADEPS) $(RESULTDEPS) $(REAL_OCAMLFIND) $(OCAMLOPT) -a $(filter-out -custom, $(ALL_LDFLAGS)) $(OBJS_LIBS) -o $@ $(LIB_PACK_NAME).cmx endif $(RES_CLIB): $(OBJ_LINK) ifndef MSVC ifneq ($(strip $(OBJ_LINK)),) $(AR) rcs $@ $(OBJ_LINK) endif else ifneq ($(strip $(OBJ_LINK)),) lib -nologo -debugtype:cv -out:$(RES_CLIB) $(OBJ_LINK) endif endif .mli.cmi: $(EXTRADEPS) $(QUIET)pp=`sed -n -e '/^#/d' -e 's/(\*pp \([^*]*\) \*)/\1/p;q' $<`; \ if [ -z "$$pp" ]; then \ $(ECHO) $(REAL_OCAMLFIND) $(INTF_OCAMLC) $(OCAML_FIND_PACKAGES) \ -c $(THREAD_FLAG) $(ANNOT_FLAG) \ $(OCAMLFLAGS) $(INCFLAGS) $<; \ $(REAL_OCAMLFIND) $(INTF_OCAMLC) $(OCAML_FIND_PACKAGES) \ -c $(THREAD_FLAG) $(ANNOT_FLAG) \ $(OCAMLFLAGS) $(INCFLAGS) $<; \ else \ $(ECHO) $(REAL_OCAMLFIND) $(INTF_OCAMLC) $(OCAML_FIND_PACKAGES) \ -c -pp \"$$pp $(PPFLAGS)\" $(THREAD_FLAG) $(ANNOT_FLAG) \ $(OCAMLFLAGS) $(INCFLAGS) $<; \ $(REAL_OCAMLFIND) $(INTF_OCAMLC) $(OCAML_FIND_PACKAGES) \ -c -pp "$$pp $(PPFLAGS)" $(THREAD_FLAG) $(ANNOT_FLAG) \ $(OCAMLFLAGS) $(INCFLAGS) $<; \ fi .ml.cmi .ml.$(EXT_OBJ) .ml.cmx .ml.cmo: $(EXTRADEPS) $(QUIET)pp=`sed -n -e '/^#/d' -e 's/(\*pp \([^*]*\) \*)/\1/p;q' $<`; \ if [ -z "$$pp" ]; then \ $(ECHO) $(REAL_OCAMLFIND) $(REAL_OCAMLC) $(OCAML_FIND_PACKAGES) \ -c $(ALL_OCAMLCFLAGS) $<; \ $(REAL_OCAMLFIND) $(REAL_OCAMLC) $(OCAML_FIND_PACKAGES) \ -c $(ALL_OCAMLCFLAGS) $<; \ else \ $(ECHO) $(REAL_OCAMLFIND) $(REAL_OCAMLC) $(OCAML_FIND_PACKAGES) \ -c -pp \"$$pp $(PPFLAGS)\" $(ALL_OCAMLCFLAGS) $<; \ $(REAL_OCAMLFIND) $(REAL_OCAMLC) $(OCAML_FIND_PACKAGES) \ -c -pp "$$pp $(PPFLAGS)" $(ALL_OCAMLCFLAGS) $<; \ fi ifdef PACK_LIB $(REAL_RESULT).cmo $(REAL_RESULT).cmx $(REAL_RESULT).o: $(REAL_IMPL_INTF) $(OBJ_LINK) $(EXTRADEPS) $(REAL_OCAMLFIND) $(REAL_OCAMLC) -pack $(ALL_LDFLAGS) \ $(OBJS_LIBS) -o $@ $(REAL_IMPL) endif .PRECIOUS: %.ml %.ml: %.mll $(OCAMLLEX) $(LFLAGS) $< .PRECIOUS: %.ml %.mli %.ml %.mli: %.mly $(OCAMLYACC) $(YFLAGS) $< $(QUIET)pp=`sed -n -e 's/.*(\*pp \([^*]*\) \*).*/\1/p;q' $<`; \ if [ ! -z "$$pp" ]; then \ mv $*.ml $*.ml.temporary; \ echo "(*pp $$pp $(PPFLAGS)*)" > $*.ml; \ cat $*.ml.temporary >> $*.ml; \ rm $*.ml.temporary; \ mv $*.mli $*.mli.temporary; \ echo "(*pp $$pp $(PPFLAGS)*)" > $*.mli; \ cat $*.mli.temporary >> $*.mli; \ rm $*.mli.temporary; \ fi .PRECIOUS: %.ml %.ml: %.rep $(CAMELEON_REPORT) $(CAMELEON_REPORT_FLAGS) -gen $< .PRECIOUS: %.ml %.ml: %.zog $(CAMELEON_ZOGGY) $(CAMELEON_ZOGGY_FLAGS) -impl $< > $@ .PRECIOUS: %.ml %.ml: %.glade $(OCAML_GLADECC) $(OCAML_GLADECC_FLAGS) $< > $@ .PRECIOUS: %.ml %.mli %.ml %.mli: %.oxridl $(OXRIDL) $< .PRECIOUS: %.ml %.mli %_stubs.c %.h %.ml %.mli %_stubs.c %.h: %.idl $(CAMLIDL) $(MAYBE_IDL_HEADER) $(IDLFLAGS) \ $(CAMLIDLFLAGS) $< $(QUIET)if [ $(NOIDLHEADER) ]; then touch $*.h; fi .c.$(EXT_OBJ): $(OCAMLC) -c -cc "$(CC)" -ccopt "$(CFLAGS) \ $(CPPFLAGS) $(CPPFLAGS_WIN32) \ $(CFLAGS_WIN32) $(CINCFLAGS) $(CFLAG_O)$@ " $< .m.$(EXT_OBJ): $(CC) -c $(CFLAGS) $(CINCFLAGS) $(CPPFLAGS) \ -I'$(OCAMLLIBPATH)' \ $< $(CFLAG_O)$@ .$(EXT_CXX).$(EXT_OBJ): $(CXX) -c $(CXXFLAGS) $(CINCFLAGS) $(CPPFLAGS) \ -I'$(OCAMLLIBPATH)' \ $< $(CFLAG_O)$@ $(MLDEPDIR)/%.d: %.ml $(QUIET)if [ ! -d $(@D) ]; then mkdir -p $(@D); fi $(QUIET)pp=`sed -n -e '/^#/d' -e 's/(\*pp \([^*]*\) \*)/\1/p;q' $<`; \ if [ -z "$$pp" ]; then \ $(ECHO) $(REAL_OCAMLFIND) $(OCAMLDEP) $(OCAML_DEP_PACKAGES) \ $(DINCFLAGS) $< \> $@; \ $(REAL_OCAMLFIND) $(OCAMLDEP) $(OCAML_DEP_PACKAGES) \ $(DINCFLAGS) $< > $@; \ else \ $(ECHO) $(REAL_OCAMLFIND) $(OCAMLDEP) $(OCAML_DEP_PACKAGES) \ -pp \"$$pp $(PPFLAGS)\" $(DINCFLAGS) $< \> $@; \ $(REAL_OCAMLFIND) $(OCAMLDEP) $(OCAML_DEP_PACKAGES) \ -pp "$$pp $(PPFLAGS)" $(DINCFLAGS) $< > $@; \ fi $(BCDIDIR)/%.di $(NCDIDIR)/%.di: %.mli $(QUIET)if [ ! -d $(@D) ]; then mkdir -p $(@D); fi $(QUIET)pp=`sed -n -e '/^#/d' -e 's/(\*pp \([^*]*\) \*)/\1/p;q' $<`; \ if [ -z "$$pp" ]; then \ $(ECHO) $(REAL_OCAMLFIND) $(OCAMLDEP) $(DEPFLAGS) $(DINCFLAGS) $< \> $@; \ $(REAL_OCAMLFIND) $(OCAMLDEP) $(DEPFLAGS) $(DINCFLAGS) $< > $@; \ else \ $(ECHO) $(REAL_OCAMLFIND) $(OCAMLDEP) $(DEPFLAGS) \ -pp \"$$pp $(PPFLAGS)\" $(DINCFLAGS) $< \> $@; \ $(REAL_OCAMLFIND) $(OCAMLDEP) $(DEPFLAGS) \ -pp "$$pp $(PPFLAGS)" $(DINCFLAGS) $< > $@; \ fi $(DOC_DIR)/$(RESULT)/html: mkdir -p $@ $(DOC_DIR)/$(RESULT)/html/index.html: $(DOC_DIR)/$(RESULT)/html $(DOC_FILES) rm -rf $ aclocal # Doing this only once sometimes yield an error message (AC_MSG_ERROR # undefined).. I give up understanding that. autoconf autoconf ocaml-magic-0.7.3/LICENSE0000644000175000017500000006534510426053401013371 0ustar trchtrchThis Library is distributed under the terms of the GNU Lesser General Public License version 2.1 (included below). As a special exception to the GNU Lesser General Public License, you may link, statically or dynamically, a "work that uses the Library" with a publicly distributed version of the Library to produce an executable file containing portions of the Library, and distribute that executable file under terms of your choice, without any of the additional requirements listed in clause 6 of the GNU Lesser General Public License. By "a publicly distributed version of the Library", we mean either the unmodified Library as distributed, or a modified version of the Library that is distributed under the conditions defined in clause 3 of the GNU Library General Public License. This exception does not however invalidate any other reasons why the executable file might be covered by the GNU Lesser General Public License. GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.] Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public Licenses are intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This license, the Lesser General Public License, applies to some specially designated software packages--typically libraries--of the Free Software Foundation and other authors who decide to use it. You can use it too, but we suggest you first think carefully about whether this license or the ordinary General Public License is the better strategy to use in any particular case, based on the explanations below. When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish); that you receive source code or can get it if you want it; that you can change the software and use pieces of it in new free programs; and that you are informed that you can do these things. To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to surrender these rights. These restrictions translate to certain responsibilities for you if you distribute copies of the library or if you modify it. For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that we gave you. You must make sure that they, too, receive or can get the source code. If you link other code with the library, you must provide complete object files to the recipients, so that they can relink them with the library after making changes to the library and recompiling it. And you must show them these terms so they know their rights. We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which gives you legal permission to copy, distribute and/or modify the library. To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library is modified by someone else and passed on, the recipients should know that what they have is not the original version, so that the original author's reputation will not be affected by problems that might be introduced by others. Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a company cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent holder. Therefore, we insist that any patent license obtained for a version of the library must be consistent with the full freedom of use specified in this license. Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license, the GNU Lesser General Public License, applies to certain designated libraries, and is quite different from the ordinary General Public License. We use this license for certain libraries in order to permit linking those libraries into non-free programs. When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally speaking a combined work, a derivative of the original library. The ordinary General Public License therefore permits such linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits more lax criteria for linking other code with the library. We call this license the "Lesser" General Public License because it does Less to protect the user's freedom than the ordinary General Public License. It also provides other free software developers Less of an advantage over competing non-free programs. These disadvantages are the reason we use the ordinary General Public License for many libraries. However, the Lesser license provides advantages in certain special circumstances. For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so that it becomes a de-facto standard. To achieve this, non-free programs must be allowed to use the library. A more frequent case is that a free library does the same job as widely used non-free libraries. In this case, there is little to gain by limiting the free library to free software only, so we use the Lesser General Public License. In other cases, permission to use a particular library in non-free programs enables a greater number of people to use a large body of free software. For example, permission to use the GNU C Library in non-free programs enables many more people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system. Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library. The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a "work based on the library" and a "work that uses the library". The former contains code derived from the library, whereas the latter must be combined with the library in order to run. GNU LESSER GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public License (also called "this License"). Each licensee is addressed as "you". A "library" means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some of those functions and data) to form executables. The "Library", below, refers to any such software library or work which has been distributed under these terms. A "work based on the Library" means either the Library or any derivative work under copyright law: that is to say, a work containing the Library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into another language. (Hereinafter, translation is included without limitation in the term "modification".) "Source code" for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the library. Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running a program using the Library is not restricted, and output from such a program is covered only if its contents constitute a work based on the Library (independent of the use of the Library in a tool for writing it). Whether that is true depends on what the Library does and what the program that uses the Library does. 1. You may copy and distribute verbatim copies of the Library's complete source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and distribute a copy of this License along with the Library. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) The modified work must itself be a software library. b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change. c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License. d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility, other than as an argument passed when the facility is invoked, then you must make a good faith effort to ensure that, in the event an application does not supply such function or table, the facility still operates, and performs whatever part of its purpose remains meaningful. (For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent of the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this function must be optional: if the application does not supply it, the square root function must still compute square roots.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Library, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Library, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Library. In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other change in these notices. Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy. This option is useful when you wish to copy part of the code of the Library into a program that is not a library. 4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange. If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place satisfies the requirement to distribute the source code, even though third parties are not compelled to copy the source along with the object code. 5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled or linked with it, is called a "work that uses the Library". Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of this License. However, linking a "work that uses the Library" with the Library creates an executable that is a derivative of the Library (because it contains portions of the Library), rather than a "work that uses the library". The executable is therefore covered by this License. Section 6 states terms for distribution of such executables. When a "work that uses the Library" uses material from a header file that is part of the Library, the object code for the work may be a derivative work of the Library even though the source code is not. Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself a library. The threshold for this to be true is not precisely defined by law. If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is legally a derivative work. (Executables containing this object code plus portions of the Library will still fall under Section 6.) Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with the Library itself. 6. As an exception to the Sections above, you may also combine or link a "work that uses the Library" with the Library to produce a work containing portions of the Library, and distribute that work under terms of your choice, provided that the terms permit modification of the work for the customer's own use and reverse engineering for debugging such modifications. You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License. You must supply a copy of this License. If the work during execution displays copyright notices, you must include the copyright notice for the Library among them, as well as a reference directing the user to the copy of this License. Also, you must do one of these things: a) Accompany the work with the complete corresponding machine-readable source code for the Library including whatever changes were used in the work (which must be distributed under Sections 1 and 2 above); and, if the work is an executable linked with the Library, with the complete machine-readable "work that uses the Library", as object code and/or source code, so that the user can modify the Library and then relink to produce a modified executable containing the modified Library. (It is understood that the user who changes the contents of definitions files in the Library will not necessarily be able to recompile the application to use the modified definitions.) b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at run time a copy of the library already present on the user's computer system, rather than copying library functions into the executable, and (2) will operate properly with a modified version of the library, if the user installs one, as long as the modified version is interface-compatible with the version that the work was made with. c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6a, above, for a charge no more than the cost of performing this distribution. d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from the same place. e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy. For an executable, the required form of the "work that uses the Library" must include any data and utility programs needed for reproducing the executable from it. However, as a special exception, the materials to be distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system. Such a contradiction means you cannot use both them and the Library together in an executable that you distribute. 7. You may place library facilities that are a work based on the Library side-by-side in a single library together with other library facilities not covered by this License, and distribute such a combined library, provided that the separate distribution of the work based on the Library and of the other library facilities is otherwise permitted, and provided that you do these two things: a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilities. This must be distributed under the terms of the Sections above. b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and explaining where to find the accompanying uncombined form of the same work. 8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 9. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Library or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Library (or any work based on the Library), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Library or works based on it. 10. Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a license from the original licensor to copy, distribute, link with or modify the Library subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties with this License. 11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Library at all. For example, if a patent license would not permit royalty-free redistribution of the Library by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Library. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Library under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Library specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Library does not specify a license version number, you may choose any version ever published by the Free Software Foundation. 14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Libraries If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute and change. You can do so by permitting redistribution under these terms (or, alternatively, under the terms of the ordinary General Public License). To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found. Copyright (C) This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Also add information on how to contact you by electronic and paper mail. You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the library, if necessary. Here is a sample; alter the names: Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob' (a library for tweaking knobs) written by James Random Hacker. , 1 April 1990 Ty Coon, President of Vice That's all there is to it! ocaml-magic-0.7.3/ChangeLog0000644000175000017500000000021510771435432014132 0ustar trchtrch2008-03-23 Christophe Troestler * Merged in Romain Beauxis patch for OCamlMakefile and configure support. ocaml-magic-0.7.3/configure0000755000175000017500000034421110771672767014314 0ustar trchtrch#! /bin/sh # Guess values for system-dependent variables and create Makefiles. # Generated by GNU Autoconf 2.61 for ocaml-magic 0.7.3. # # Report bugs to . # # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, # 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. ## --------------------- ## ## M4sh Initialization. ## ## --------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac fi # PATH needs CR # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then echo "#! /bin/sh" >conf$$.sh echo "exit 0" >>conf$$.sh chmod +x conf$$.sh if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi rm -f conf$$.sh fi # Support unset when possible. if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then as_unset=unset else as_unset=false fi # IFS # We need space, tab and new line, in precisely that order. Quoting is # there to prevent editors from complaining about space-tab. # (If _AS_PATH_WALK were called with IFS unset, it would disable word # splitting by setting IFS to empty value.) as_nl=' ' IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. case $0 in *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done IFS=$as_save_IFS ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 { (exit 1); exit 1; } fi # Work around bugs in pre-3.0 UWIN ksh. for as_var in ENV MAIL MAILPATH do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. for as_var in \ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ LC_TELEPHONE LC_TIME do if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then eval $as_var=C; export $as_var else ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var fi done # Required to use basename. if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi # Name of the executable. as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` # CDPATH. $as_unset CDPATH if test "x$CONFIG_SHELL" = x; then if (eval ":") 2>/dev/null; then as_have_required=yes else as_have_required=no fi if test $as_have_required = yes && (eval ": (as_func_return () { (exit \$1) } as_func_success () { as_func_return 0 } as_func_failure () { as_func_return 1 } as_func_ret_success () { return 0 } as_func_ret_failure () { return 1 } exitcode=0 if as_func_success; then : else exitcode=1 echo as_func_success failed. fi if as_func_failure; then exitcode=1 echo as_func_failure succeeded. fi if as_func_ret_success; then : else exitcode=1 echo as_func_ret_success failed. fi if as_func_ret_failure; then exitcode=1 echo as_func_ret_failure succeeded. fi if ( set x; as_func_ret_success y && test x = \"\$1\" ); then : else exitcode=1 echo positional parameters were not saved. fi test \$exitcode = 0) || { (exit 1); exit 1; } ( as_lineno_1=\$LINENO as_lineno_2=\$LINENO test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } ") 2> /dev/null; then : else as_candidate_shells= as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. case $as_dir in /*) for as_base in sh bash ksh sh5; do as_candidate_shells="$as_candidate_shells $as_dir/$as_base" done;; esac done IFS=$as_save_IFS for as_shell in $as_candidate_shells $SHELL; do # Try only shells that exist, to save several forks. if { test -f "$as_shell" || test -f "$as_shell.exe"; } && { ("$as_shell") 2> /dev/null <<\_ASEOF if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac fi : _ASEOF }; then CONFIG_SHELL=$as_shell as_have_required=yes if { "$as_shell" 2> /dev/null <<\_ASEOF if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac fi : (as_func_return () { (exit $1) } as_func_success () { as_func_return 0 } as_func_failure () { as_func_return 1 } as_func_ret_success () { return 0 } as_func_ret_failure () { return 1 } exitcode=0 if as_func_success; then : else exitcode=1 echo as_func_success failed. fi if as_func_failure; then exitcode=1 echo as_func_failure succeeded. fi if as_func_ret_success; then : else exitcode=1 echo as_func_ret_success failed. fi if as_func_ret_failure; then exitcode=1 echo as_func_ret_failure succeeded. fi if ( set x; as_func_ret_success y && test x = "$1" ); then : else exitcode=1 echo positional parameters were not saved. fi test $exitcode = 0) || { (exit 1); exit 1; } ( as_lineno_1=$LINENO as_lineno_2=$LINENO test "x$as_lineno_1" != "x$as_lineno_2" && test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } _ASEOF }; then break fi fi done if test "x$CONFIG_SHELL" != x; then for as_var in BASH_ENV ENV do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var done export CONFIG_SHELL exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} fi if test $as_have_required = no; then echo This script requires a shell more modern than all the echo shells that I found on your system. Please install a echo modern shell, or manually run the script under such a echo shell if you do have one. { (exit 1); exit 1; } fi fi fi (eval "as_func_return () { (exit \$1) } as_func_success () { as_func_return 0 } as_func_failure () { as_func_return 1 } as_func_ret_success () { return 0 } as_func_ret_failure () { return 1 } exitcode=0 if as_func_success; then : else exitcode=1 echo as_func_success failed. fi if as_func_failure; then exitcode=1 echo as_func_failure succeeded. fi if as_func_ret_success; then : else exitcode=1 echo as_func_ret_success failed. fi if as_func_ret_failure; then exitcode=1 echo as_func_ret_failure succeeded. fi if ( set x; as_func_ret_success y && test x = \"\$1\" ); then : else exitcode=1 echo positional parameters were not saved. fi test \$exitcode = 0") || { echo No shell found that supports shell functions. echo Please tell autoconf@gnu.org about your system, echo including any error possibly output before this echo message } as_lineno_1=$LINENO as_lineno_2=$LINENO test "x$as_lineno_1" != "x$as_lineno_2" && test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { # Create $as_me.lineno as a copy of $as_myself, but with $LINENO # uniformly replaced by the line number. The first 'sed' inserts a # line-number line after each line using $LINENO; the second 'sed' # does the real work. The second script uses 'N' to pair each # line-number line with the line containing $LINENO, and appends # trailing '-' during substitution so that $LINENO is not a special # case at line end. # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the # scripts with optimization help from Paolo Bonzini. Blame Lee # E. McMahon (1931-1989) for sed's syntax. :-) sed -n ' p /[$]LINENO/= ' <$as_myself | sed ' s/[$]LINENO.*/&-/ t lineno b :lineno N :loop s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ t loop s/-\n.*// ' >$as_me.lineno && chmod +x "$as_me.lineno" || { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 { (exit 1); exit 1; }; } # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the # original and so on. Autoconf is especially sensitive to this). . "./$as_me.lineno" # Exit status is that of the last command. exit } if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then as_dirname=dirname else as_dirname=false fi ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in -n*) case `echo 'x\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. *) ECHO_C='\c';; esac;; *) ECHO_N='-n';; esac if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir mkdir conf$$.dir fi echo >conf$$.file if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. # In both cases, we have to default to `cp -p'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -p' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -p' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null if mkdir -p . 2>/dev/null; then as_mkdir_p=: else test -d ./-p && rmdir ./-p as_mkdir_p=false fi if test -x / >/dev/null 2>&1; then as_test_x='test -x' else if ls -dL / >/dev/null 2>&1; then as_ls_L_option=L else as_ls_L_option= fi as_test_x=' eval sh -c '\'' if test -d "$1"; then test -d "$1/."; else case $1 in -*)set "./$1";; esac; case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in ???[sx]*):;;*)false;;esac;fi '\'' sh ' fi as_executable_p=$as_test_x # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" exec 7<&0 &1 # Name of the host. # hostname on some systems (SVR3.2, Linux) returns a bogus exit status, # so uname gets run too. ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` # # Initializations. # ac_default_prefix=/usr/local ac_clean_files= ac_config_libobj_dir=. LIBOBJS= cross_compiling=no subdirs= MFLAGS= MAKEFLAGS= SHELL=${CONFIG_SHELL-/bin/sh} # Identity of this package. PACKAGE_NAME='ocaml-magic' PACKAGE_TARNAME='ocaml-magic' PACKAGE_VERSION='0.7.3' PACKAGE_STRING='ocaml-magic 0.7.3' PACKAGE_BUGREPORT='chris_77@users.sourceforge.net' ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datarootdir datadir sysconfdir sharedstatedir localstatedir includedir oldincludedir docdir infodir htmldir dvidir pdfdir psdir libdir localedir mandir DEFS ECHO_C ECHO_N ECHO_T LIBS build_alias host_alias target_alias OCAMLC OCAMLOPT OCAMLCDOTOPT OCAMLOPTDOTOPT OCAMLDEP OCAMLDOC OCAMLFIND CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT VERSION OCAMLBEST OCAMLVERSION OCAMLLIB OCAMLBIN OCAMLFIND_LDCONF OCAMLCP CAMLLIBPATH BEST INC CLIBS requires all_requires LIBOBJS LTLIBOBJS' ac_subst_files='' ac_precious_vars='build_alias host_alias target_alias CC CFLAGS LDFLAGS LIBS CPPFLAGS' # Initialize some variables set by options. ac_init_help= ac_init_version=false # The variables have the same names as the options, with # dashes changed to underlines. cache_file=/dev/null exec_prefix=NONE no_create= no_recursion= prefix=NONE program_prefix=NONE program_suffix=NONE program_transform_name=s,x,x, silent= site= srcdir= verbose= x_includes=NONE x_libraries=NONE # Installation directory options. # These are left unexpanded so users can "make install exec_prefix=/foo" # and all the variables that are supposed to be based on exec_prefix # by default will actually change. # Use braces instead of parens because sh, perl, etc. also accept them. # (The list follows the same order as the GNU Coding Standards.) bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' datarootdir='${prefix}/share' datadir='${datarootdir}' sysconfdir='${prefix}/etc' sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' includedir='${prefix}/include' oldincludedir='/usr/include' docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' infodir='${datarootdir}/info' htmldir='${docdir}' dvidir='${docdir}' pdfdir='${docdir}' psdir='${docdir}' libdir='${exec_prefix}/lib' localedir='${datarootdir}/locale' mandir='${datarootdir}/man' ac_prev= ac_dashdash= for ac_option do # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then eval $ac_prev=\$ac_option ac_prev= continue fi case $ac_option in *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; *) ac_optarg=yes ;; esac # Accept the important Cygnus configure options, so we can diagnose typos. case $ac_dashdash$ac_option in --) ac_dashdash=yes ;; -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) bindir=$ac_optarg ;; -build | --build | --buil | --bui | --bu) ac_prev=build_alias ;; -build=* | --build=* | --buil=* | --bui=* | --bu=*) build_alias=$ac_optarg ;; -cache-file | --cache-file | --cache-fil | --cache-fi \ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ac_prev=cache_file ;; -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) cache_file=$ac_optarg ;; --config-cache | -C) cache_file=config.cache ;; -datadir | --datadir | --datadi | --datad) ac_prev=datadir ;; -datadir=* | --datadir=* | --datadi=* | --datad=*) datadir=$ac_optarg ;; -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ | --dataroo | --dataro | --datar) ac_prev=datarootdir ;; -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) datarootdir=$ac_optarg ;; -disable-* | --disable-*) ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid feature name: $ac_feature" >&2 { (exit 1); exit 1; }; } ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` eval enable_$ac_feature=no ;; -docdir | --docdir | --docdi | --doc | --do) ac_prev=docdir ;; -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) docdir=$ac_optarg ;; -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) ac_prev=dvidir ;; -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) dvidir=$ac_optarg ;; -enable-* | --enable-*) ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid feature name: $ac_feature" >&2 { (exit 1); exit 1; }; } ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` eval enable_$ac_feature=\$ac_optarg ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ | --exec | --exe | --ex) ac_prev=exec_prefix ;; -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ | --exec=* | --exe=* | --ex=*) exec_prefix=$ac_optarg ;; -gas | --gas | --ga | --g) # Obsolete; use --with-gas. with_gas=yes ;; -help | --help | --hel | --he | -h) ac_init_help=long ;; -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) ac_init_help=recursive ;; -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) ac_init_help=short ;; -host | --host | --hos | --ho) ac_prev=host_alias ;; -host=* | --host=* | --hos=* | --ho=*) host_alias=$ac_optarg ;; -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) ac_prev=htmldir ;; -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ | --ht=*) htmldir=$ac_optarg ;; -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ | --includ=* | --inclu=* | --incl=* | --inc=*) includedir=$ac_optarg ;; -infodir | --infodir | --infodi | --infod | --info | --inf) ac_prev=infodir ;; -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) infodir=$ac_optarg ;; -libdir | --libdir | --libdi | --libd) ac_prev=libdir ;; -libdir=* | --libdir=* | --libdi=* | --libd=*) libdir=$ac_optarg ;; -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ | --libexe | --libex | --libe) ac_prev=libexecdir ;; -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ | --libexe=* | --libex=* | --libe=*) libexecdir=$ac_optarg ;; -localedir | --localedir | --localedi | --localed | --locale) ac_prev=localedir ;; -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) localedir=$ac_optarg ;; -localstatedir | --localstatedir | --localstatedi | --localstated \ | --localstate | --localstat | --localsta | --localst | --locals) ac_prev=localstatedir ;; -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) localstatedir=$ac_optarg ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ac_prev=mandir ;; -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) mandir=$ac_optarg ;; -nfp | --nfp | --nf) # Obsolete; use --without-fp. with_fp=no ;; -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c | -n) no_create=yes ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) no_recursion=yes ;; -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ | --oldin | --oldi | --old | --ol | --o) ac_prev=oldincludedir ;; -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) oldincludedir=$ac_optarg ;; -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ac_prev=prefix ;; -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) prefix=$ac_optarg ;; -program-prefix | --program-prefix | --program-prefi | --program-pref \ | --program-pre | --program-pr | --program-p) ac_prev=program_prefix ;; -program-prefix=* | --program-prefix=* | --program-prefi=* \ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) program_prefix=$ac_optarg ;; -program-suffix | --program-suffix | --program-suffi | --program-suff \ | --program-suf | --program-su | --program-s) ac_prev=program_suffix ;; -program-suffix=* | --program-suffix=* | --program-suffi=* \ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) program_suffix=$ac_optarg ;; -program-transform-name | --program-transform-name \ | --program-transform-nam | --program-transform-na \ | --program-transform-n | --program-transform- \ | --program-transform | --program-transfor \ | --program-transfo | --program-transf \ | --program-trans | --program-tran \ | --progr-tra | --program-tr | --program-t) ac_prev=program_transform_name ;; -program-transform-name=* | --program-transform-name=* \ | --program-transform-nam=* | --program-transform-na=* \ | --program-transform-n=* | --program-transform-=* \ | --program-transform=* | --program-transfor=* \ | --program-transfo=* | --program-transf=* \ | --program-trans=* | --program-tran=* \ | --progr-tra=* | --program-tr=* | --program-t=*) program_transform_name=$ac_optarg ;; -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) ac_prev=pdfdir ;; -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) pdfdir=$ac_optarg ;; -psdir | --psdir | --psdi | --psd | --ps) ac_prev=psdir ;; -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) psdir=$ac_optarg ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) silent=yes ;; -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ac_prev=sbindir ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ | --sbi=* | --sb=*) sbindir=$ac_optarg ;; -sharedstatedir | --sharedstatedir | --sharedstatedi \ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ | --sharedst | --shareds | --shared | --share | --shar \ | --sha | --sh) ac_prev=sharedstatedir ;; -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ | --sha=* | --sh=*) sharedstatedir=$ac_optarg ;; -site | --site | --sit) ac_prev=site ;; -site=* | --site=* | --sit=*) site=$ac_optarg ;; -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) srcdir=$ac_optarg ;; -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ | --syscon | --sysco | --sysc | --sys | --sy) ac_prev=sysconfdir ;; -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) sysconfdir=$ac_optarg ;; -target | --target | --targe | --targ | --tar | --ta | --t) ac_prev=target_alias ;; -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) target_alias=$ac_optarg ;; -v | -verbose | --verbose | --verbos | --verbo | --verb) verbose=yes ;; -version | --version | --versio | --versi | --vers | -V) ac_init_version=: ;; -with-* | --with-*) ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid package name: $ac_package" >&2 { (exit 1); exit 1; }; } ac_package=`echo $ac_package | sed 's/[-.]/_/g'` eval with_$ac_package=\$ac_optarg ;; -without-* | --without-*) ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid package name: $ac_package" >&2 { (exit 1); exit 1; }; } ac_package=`echo $ac_package | sed 's/[-.]/_/g'` eval with_$ac_package=no ;; --x) # Obsolete; use --with-x. with_x=yes ;; -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ | --x-incl | --x-inc | --x-in | --x-i) ac_prev=x_includes ;; -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) x_includes=$ac_optarg ;; -x-libraries | --x-libraries | --x-librarie | --x-librari \ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ac_prev=x_libraries ;; -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries=$ac_optarg ;; -*) { echo "$as_me: error: unrecognized option: $ac_option Try \`$0 --help' for more information." >&2 { (exit 1); exit 1; }; } ;; *=*) ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` # Reject names that are not valid shell variable names. expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 { (exit 1); exit 1; }; } eval $ac_envvar=\$ac_optarg export $ac_envvar ;; *) # FIXME: should be removed in autoconf 3.0. echo "$as_me: WARNING: you should use --build, --host, --target" >&2 expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && echo "$as_me: WARNING: invalid host type: $ac_option" >&2 : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} ;; esac done if test -n "$ac_prev"; then ac_option=--`echo $ac_prev | sed 's/_/-/g'` { echo "$as_me: error: missing argument to $ac_option" >&2 { (exit 1); exit 1; }; } fi # Be sure to have absolute directory names. for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ datadir sysconfdir sharedstatedir localstatedir includedir \ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ libdir localedir mandir do eval ac_val=\$$ac_var case $ac_val in [\\/$]* | ?:[\\/]* ) continue;; NONE | '' ) case $ac_var in *prefix ) continue;; esac;; esac { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 { (exit 1); exit 1; }; } done # There might be people who depend on the old broken behavior: `$host' # used to hold the argument of --host etc. # FIXME: To remove some day. build=$build_alias host=$host_alias target=$target_alias # FIXME: To remove some day. if test "x$host_alias" != x; then if test "x$build_alias" = x; then cross_compiling=maybe echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used." >&2 elif test "x$build_alias" != "x$host_alias"; then cross_compiling=yes fi fi ac_tool_prefix= test -n "$host_alias" && ac_tool_prefix=$host_alias- test "$silent" = yes && exec 6>/dev/null ac_pwd=`pwd` && test -n "$ac_pwd" && ac_ls_di=`ls -di .` && ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || { echo "$as_me: error: Working directory cannot be determined" >&2 { (exit 1); exit 1; }; } test "X$ac_ls_di" = "X$ac_pwd_ls_di" || { echo "$as_me: error: pwd does not report name of working directory" >&2 { (exit 1); exit 1; }; } # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes # Try the directory containing this script, then the parent directory. ac_confdir=`$as_dirname -- "$0" || $as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$0" : 'X\(//\)[^/]' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || echo X"$0" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` srcdir=$ac_confdir if test ! -r "$srcdir/$ac_unique_file"; then srcdir=.. fi else ac_srcdir_defaulted=no fi if test ! -r "$srcdir/$ac_unique_file"; then test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 { (exit 1); exit 1; }; } fi ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" ac_abs_confdir=`( cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2 { (exit 1); exit 1; }; } pwd)` # When building in place, set srcdir=. if test "$ac_abs_confdir" = "$ac_pwd"; then srcdir=. fi # Remove unnecessary trailing slashes from srcdir. # Double slashes in file names in object file debugging info # mess up M-x gdb in Emacs. case $srcdir in */) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; esac for ac_var in $ac_precious_vars; do eval ac_env_${ac_var}_set=\${${ac_var}+set} eval ac_env_${ac_var}_value=\$${ac_var} eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} eval ac_cv_env_${ac_var}_value=\$${ac_var} done # # Report the --help message. # if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF \`configure' configures ocaml-magic 0.7.3 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... To assign environment variables (e.g., CC, CFLAGS...), specify them as VAR=VALUE. See below for descriptions of some of the useful variables. Defaults for the options are specified in brackets. Configuration: -h, --help display this help and exit --help=short display options specific to this package --help=recursive display the short help of all the included packages -V, --version display version information and exit -q, --quiet, --silent do not print \`checking...' messages --cache-file=FILE cache test results in FILE [disabled] -C, --config-cache alias for \`--cache-file=config.cache' -n, --no-create do not create output files --srcdir=DIR find the sources in DIR [configure dir or \`..'] Installation directories: --prefix=PREFIX install architecture-independent files in PREFIX [$ac_default_prefix] --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX [PREFIX] By default, \`make install' will install all the files in \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify an installation prefix other than \`$ac_default_prefix' using \`--prefix', for instance \`--prefix=\$HOME'. For better control, use the options below. Fine tuning of the installation directories: --bindir=DIR user executables [EPREFIX/bin] --sbindir=DIR system admin executables [EPREFIX/sbin] --libexecdir=DIR program executables [EPREFIX/libexec] --sysconfdir=DIR read-only single-machine data [PREFIX/etc] --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] --localstatedir=DIR modifiable single-machine data [PREFIX/var] --libdir=DIR object code libraries [EPREFIX/lib] --includedir=DIR C header files [PREFIX/include] --oldincludedir=DIR C header files for non-gcc [/usr/include] --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] --datadir=DIR read-only architecture-independent data [DATAROOTDIR] --infodir=DIR info documentation [DATAROOTDIR/info] --localedir=DIR locale-dependent data [DATAROOTDIR/locale] --mandir=DIR man documentation [DATAROOTDIR/man] --docdir=DIR documentation root [DATAROOTDIR/doc/ocaml-magic] --htmldir=DIR html documentation [DOCDIR] --dvidir=DIR dvi documentation [DOCDIR] --pdfdir=DIR pdf documentation [DOCDIR] --psdir=DIR ps documentation [DOCDIR] _ACEOF cat <<\_ACEOF _ACEOF fi if test -n "$ac_init_help"; then case $ac_init_help in short | recursive ) echo "Configuration of ocaml-magic 0.7.3:";; esac cat <<\_ACEOF Optional Features: --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] --disable-ldconf don't modify the dynamic loader configuration file (default is enable) Some influential environment variables: CC C compiler command CFLAGS C compiler flags LDFLAGS linker flags, e.g. -L if you have libraries in a nonstandard directory LIBS libraries to pass to the linker, e.g. -l CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I if you have headers in a nonstandard directory Use these variables to override the choices made by `configure' or to help it to find libraries and programs with nonstandard names/locations. Report bugs to . _ACEOF ac_status=$? fi if test "$ac_init_help" = "recursive"; then # If there are subdirs, report their specific --help. for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue test -d "$ac_dir" || continue ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix cd "$ac_dir" || { ac_status=$?; continue; } # Check for guested configure. if test -f "$ac_srcdir/configure.gnu"; then echo && $SHELL "$ac_srcdir/configure.gnu" --help=recursive elif test -f "$ac_srcdir/configure"; then echo && $SHELL "$ac_srcdir/configure" --help=recursive else echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 fi || ac_status=$? cd "$ac_pwd" || { ac_status=$?; break; } done fi test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF ocaml-magic configure 0.7.3 generated by GNU Autoconf 2.61 Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. _ACEOF exit fi cat >config.log <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by ocaml-magic $as_me 0.7.3, which was generated by GNU Autoconf 2.61. Invocation command line was $ $0 $@ _ACEOF exec 5>>config.log { cat <<_ASUNAME ## --------- ## ## Platform. ## ## --------- ## hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` uname -m = `(uname -m) 2>/dev/null || echo unknown` uname -r = `(uname -r) 2>/dev/null || echo unknown` uname -s = `(uname -s) 2>/dev/null || echo unknown` uname -v = `(uname -v) 2>/dev/null || echo unknown` /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` /bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` /usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` _ASUNAME as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. echo "PATH: $as_dir" done IFS=$as_save_IFS } >&5 cat >&5 <<_ACEOF ## ----------- ## ## Core tests. ## ## ----------- ## _ACEOF # Keep a trace of the command line. # Strip out --no-create and --no-recursion so they do not pile up. # Strip out --silent because we don't want to record it for future runs. # Also quote any args containing shell meta-characters. # Make two passes to allow for proper duplicate-argument suppression. ac_configure_args= ac_configure_args0= ac_configure_args1= ac_must_keep_next=false for ac_pass in 1 2 do for ac_arg do case $ac_arg in -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) continue ;; *\'*) ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac case $ac_pass in 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; 2) ac_configure_args1="$ac_configure_args1 '$ac_arg'" if test $ac_must_keep_next = true; then ac_must_keep_next=false # Got value, back to normal. else case $ac_arg in *=* | --config-cache | -C | -disable-* | --disable-* \ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ | -with-* | --with-* | -without-* | --without-* | --x) case "$ac_configure_args0 " in "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; esac ;; -* ) ac_must_keep_next=true ;; esac fi ac_configure_args="$ac_configure_args '$ac_arg'" ;; esac done done $as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } $as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there # would cause problems or look ugly. # WARNING: Use '\'' to represent an apostrophe within the trap. # WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. trap 'exit_status=$? # Save into config.log some information that might help in debugging. { echo cat <<\_ASBOX ## ---------------- ## ## Cache variables. ## ## ---------------- ## _ASBOX echo # The following way of writing the cache mishandles newlines in values, ( for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( *) $as_unset $ac_var ;; esac ;; esac done (set) 2>&1 | case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( *${as_nl}ac_space=\ *) sed -n \ "s/'\''/'\''\\\\'\'''\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" ;; #( *) sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; esac | sort ) echo cat <<\_ASBOX ## ----------------- ## ## Output variables. ## ## ----------------- ## _ASBOX echo for ac_var in $ac_subst_vars do eval ac_val=\$$ac_var case $ac_val in *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac echo "$ac_var='\''$ac_val'\''" done | sort echo if test -n "$ac_subst_files"; then cat <<\_ASBOX ## ------------------- ## ## File substitutions. ## ## ------------------- ## _ASBOX echo for ac_var in $ac_subst_files do eval ac_val=\$$ac_var case $ac_val in *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac echo "$ac_var='\''$ac_val'\''" done | sort echo fi if test -s confdefs.h; then cat <<\_ASBOX ## ----------- ## ## confdefs.h. ## ## ----------- ## _ASBOX echo cat confdefs.h echo fi test "$ac_signal" != 0 && echo "$as_me: caught signal $ac_signal" echo "$as_me: exit $exit_status" } >&5 rm -f core *.core core.conftest.* && rm -f -r conftest* confdefs* conf$$* $ac_clean_files && exit $exit_status ' 0 for ac_signal in 1 2 13 15; do trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal done ac_signal=0 # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -f -r conftest* confdefs.h # Predefined preprocessor variables. cat >>confdefs.h <<_ACEOF #define PACKAGE_NAME "$PACKAGE_NAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_TARNAME "$PACKAGE_TARNAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_VERSION "$PACKAGE_VERSION" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_STRING "$PACKAGE_STRING" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" _ACEOF # Let the site file select an alternate cache file if it wants to. # Prefer explicitly selected file to automatically selected ones. if test -n "$CONFIG_SITE"; then set x "$CONFIG_SITE" elif test "x$prefix" != xNONE; then set x "$prefix/share/config.site" "$prefix/etc/config.site" else set x "$ac_default_prefix/share/config.site" \ "$ac_default_prefix/etc/config.site" fi shift for ac_site_file do if test -r "$ac_site_file"; then { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 echo "$as_me: loading site script $ac_site_file" >&6;} sed 's/^/| /' "$ac_site_file" >&5 . "$ac_site_file" fi done if test -r "$cache_file"; then # Some versions of bash will fail to source /dev/null (special # files actually), so we avoid doing that. if test -f "$cache_file"; then { echo "$as_me:$LINENO: loading cache $cache_file" >&5 echo "$as_me: loading cache $cache_file" >&6;} case $cache_file in [\\/]* | ?:[\\/]* ) . "$cache_file";; *) . "./$cache_file";; esac fi else { echo "$as_me:$LINENO: creating cache $cache_file" >&5 echo "$as_me: creating cache $cache_file" >&6;} >$cache_file fi # Check that the precious variables saved in the cache have kept the same # value. ac_cache_corrupted=false for ac_var in $ac_precious_vars; do eval ac_old_set=\$ac_cv_env_${ac_var}_set eval ac_new_set=\$ac_env_${ac_var}_set eval ac_old_val=\$ac_cv_env_${ac_var}_value eval ac_new_val=\$ac_env_${ac_var}_value case $ac_old_set,$ac_new_set in set,) { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ac_cache_corrupted=: ;; ,set) { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ac_cache_corrupted=: ;; ,);; *) if test "x$ac_old_val" != "x$ac_new_val"; then { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 echo "$as_me: former value: $ac_old_val" >&2;} { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 echo "$as_me: current value: $ac_new_val" >&2;} ac_cache_corrupted=: fi;; esac # Pass precious variables to config.status. if test "$ac_new_set" = set; then case $ac_new_val in *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; *) ac_arg=$ac_var=$ac_new_val ;; esac case " $ac_configure_args " in *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; esac fi done if $ac_cache_corrupted; then { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 echo "$as_me: error: changes in the environment can compromise the build" >&2;} { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} { (exit 1); exit 1; }; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu VERSION=$PACKAGE_VERSION { echo "$as_me:$LINENO: result: configuring $PACKAGE_STRING" >&5 echo "${ECHO_T}configuring $PACKAGE_STRING" >&6; } OCAMLFIND_LDCONF="" # Check whether --enable-ldconf was given. if test "${enable_ldconf+set}" = set; then enableval=$enable_ldconf; ac_enable_ldconf=$enableval else ac_enable_ldconf=$enableval fi if test "$ac_enable_ldconf" = no ; then { echo "$as_me:$LINENO: result: disabling modification of ld.conf" >&5 echo "${ECHO_T}disabling modification of ld.conf" >&6; } OCAMLFIND_LDCONF=dummy fi # Check for Ocaml compilers # we first look for ocamlc in the path; if not present, we fail # Extract the first word of "ocamlc", so it can be a program name with args. set dummy ocamlc; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_OCAMLC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$OCAMLC"; then ac_cv_prog_OCAMLC="$OCAMLC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_OCAMLC="`which ocamlc`" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS test -z "$ac_cv_prog_OCAMLC" && ac_cv_prog_OCAMLC="no" fi fi OCAMLC=$ac_cv_prog_OCAMLC if test -n "$OCAMLC"; then { echo "$as_me:$LINENO: result: $OCAMLC" >&5 echo "${ECHO_T}$OCAMLC" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi if test "$OCAMLC" = no ; then { { echo "$as_me:$LINENO: error: Cannot find ocamlc." >&5 echo "$as_me: error: Cannot find ocamlc." >&2;} { (exit 1); exit 1; }; } fi # we look for the directory of ocamlc in $OCAMLC OCAMLBIN=`dirname $OCAMLC` # we extract Ocaml version number and library path OCAMLVERSION=`$OCAMLC -v | sed -n -e 's|.*version* *\(.*\)$|\1|p' ` echo "ocaml version is $OCAMLVERSION" OCAMLLIB=`$OCAMLC -v | tail -n 1 | cut -f 4 -d " "` echo "ocaml library path is $OCAMLLIB" # then we look for ocamlopt; if not present, we issue a warning # if the version is not the same, we also discard it # we set OCAMLBEST to "opt" or "byte", whether ocamlopt is available or not # Extract the first word of "ocamlopt", so it can be a program name with args. set dummy ocamlopt; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_path_OCAMLOPT+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else case $OCAMLOPT in [\\/]* | ?:[\\/]*) ac_cv_path_OCAMLOPT="$OCAMLOPT" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_OCAMLOPT="$as_dir/$ac_word$ac_exec_ext" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS test -z "$ac_cv_path_OCAMLOPT" && ac_cv_path_OCAMLOPT="no" ;; esac fi OCAMLOPT=$ac_cv_path_OCAMLOPT if test -n "$OCAMLOPT"; then { echo "$as_me:$LINENO: result: $OCAMLOPT" >&5 echo "${ECHO_T}$OCAMLOPT" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi OCAMLBEST=byte if test "$OCAMLOPT" = no ; then { echo "$as_me:$LINENO: WARNING: Cannot find ocamlopt; bytecode compilation only." >&5 echo "$as_me: WARNING: Cannot find ocamlopt; bytecode compilation only." >&2;} else { echo "$as_me:$LINENO: checking ocamlopt version" >&5 echo $ECHO_N "checking ocamlopt version... $ECHO_C" >&6; } TMPVERSION=`$OCAMLOPT -v | sed -n -e 's|.*version* *\(.*\)$|\1|p' ` if test "$TMPVERSION" != "$OCAMLVERSION" ; then { echo "$as_me:$LINENO: result: differs from ocamlc; ocamlopt discarded." >&5 echo "${ECHO_T}differs from ocamlc; ocamlopt discarded." >&6; } OCAMLOPT=no else { echo "$as_me:$LINENO: result: ok" >&5 echo "${ECHO_T}ok" >&6; } OCAMLBEST=opt fi fi # checking for ocamlc.opt # Extract the first word of "ocamlc.opt", so it can be a program name with args. set dummy ocamlc.opt; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_path_OCAMLCDOTOPT+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else case $OCAMLCDOTOPT in [\\/]* | ?:[\\/]*) ac_cv_path_OCAMLCDOTOPT="$OCAMLCDOTOPT" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_OCAMLCDOTOPT="$as_dir/$ac_word$ac_exec_ext" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS test -z "$ac_cv_path_OCAMLCDOTOPT" && ac_cv_path_OCAMLCDOTOPT="no" ;; esac fi OCAMLCDOTOPT=$ac_cv_path_OCAMLCDOTOPT if test -n "$OCAMLCDOTOPT"; then { echo "$as_me:$LINENO: result: $OCAMLCDOTOPT" >&5 echo "${ECHO_T}$OCAMLCDOTOPT" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi if test "$OCAMLCDOTOPT" != no ; then { echo "$as_me:$LINENO: checking ocamlc.opt version" >&5 echo $ECHO_N "checking ocamlc.opt version... $ECHO_C" >&6; } TMPVERSION=`$OCAMLCDOTOPT -v | sed -n -e 's|.*version* *\(.*\)$|\1|p' ` if test "$TMPVERSION" != "$OCAMLVERSION" ; then { echo "$as_me:$LINENO: result: differs from ocamlc; ocamlc.opt discarded." >&5 echo "${ECHO_T}differs from ocamlc; ocamlc.opt discarded." >&6; } else { echo "$as_me:$LINENO: result: ok" >&5 echo "${ECHO_T}ok" >&6; } OCAMLC=$OCAMLCDOTOPT fi fi # checking for ocamlopt.opt if test "$OCAMLOPT" != no ; then # Extract the first word of "ocamlopt.opt", so it can be a program name with args. set dummy ocamlopt.opt; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_path_OCAMLOPTDOTOPT+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else case $OCAMLOPTDOTOPT in [\\/]* | ?:[\\/]*) ac_cv_path_OCAMLOPTDOTOPT="$OCAMLOPTDOTOPT" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_OCAMLOPTDOTOPT="$as_dir/$ac_word$ac_exec_ext" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS test -z "$ac_cv_path_OCAMLOPTDOTOPT" && ac_cv_path_OCAMLOPTDOTOPT="no" ;; esac fi OCAMLOPTDOTOPT=$ac_cv_path_OCAMLOPTDOTOPT if test -n "$OCAMLOPTDOTOPT"; then { echo "$as_me:$LINENO: result: $OCAMLOPTDOTOPT" >&5 echo "${ECHO_T}$OCAMLOPTDOTOPT" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi if test "$OCAMLOPTDOTOPT" != no ; then { echo "$as_me:$LINENO: checking ocamlc.opt version" >&5 echo $ECHO_N "checking ocamlc.opt version... $ECHO_C" >&6; } TMPVER=`$OCAMLOPTDOTOPT -v | sed -n -e 's|.*version* *\(.*\)$|\1|p' ` if test "$TMPVER" != "$OCAMLVERSION" ; then { echo "$as_me:$LINENO: result: differs from ocamlc; ocamlopt.opt discarded." >&5 echo "${ECHO_T}differs from ocamlc; ocamlopt.opt discarded." >&6; } else { echo "$as_me:$LINENO: result: ok" >&5 echo "${ECHO_T}ok" >&6; } OCAMLOPT=$OCAMLOPTDOTOPT fi fi fi # Extract the first word of "ocamldep", so it can be a program name with args. set dummy ocamldep; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_path_OCAMLDEP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else case $OCAMLDEP in [\\/]* | ?:[\\/]*) ac_cv_path_OCAMLDEP="$OCAMLDEP" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_OCAMLDEP="$as_dir/$ac_word$ac_exec_ext" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS test -z "$ac_cv_path_OCAMLDEP" && ac_cv_path_OCAMLDEP="no" ;; esac fi OCAMLDEP=$ac_cv_path_OCAMLDEP if test -n "$OCAMLDEP"; then { echo "$as_me:$LINENO: result: $OCAMLDEP" >&5 echo "${ECHO_T}$OCAMLDEP" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi if test "$OCAMLDEP" = no ; then { { echo "$as_me:$LINENO: error: Cannot find ocamldep." >&5 echo "$as_me: error: Cannot find ocamldep." >&2;} { (exit 1); exit 1; }; } fi # Extract the first word of "ocamldoc", so it can be a program name with args. set dummy ocamldoc; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_path_OCAMLDOC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else case $OCAMLDOC in [\\/]* | ?:[\\/]*) ac_cv_path_OCAMLDOC="$OCAMLDOC" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_OCAMLDOC="$as_dir/$ac_word$ac_exec_ext" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS test -z "$ac_cv_path_OCAMLDOC" && ac_cv_path_OCAMLDOC="no" ;; esac fi OCAMLDOC=$ac_cv_path_OCAMLDOC if test -n "$OCAMLDOC"; then { echo "$as_me:$LINENO: result: $OCAMLDOC" >&5 echo "${ECHO_T}$OCAMLDOC" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi # Extract the first word of "ocamlfind", so it can be a program name with args. set dummy ocamlfind; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_path_OCAMLFIND+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else case $OCAMLFIND in [\\/]* | ?:[\\/]*) ac_cv_path_OCAMLFIND="$OCAMLFIND" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_OCAMLFIND="$as_dir/$ac_word$ac_exec_ext" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS test -z "$ac_cv_path_OCAMLFIND" && ac_cv_path_OCAMLFIND="no" ;; esac fi OCAMLFIND=$ac_cv_path_OCAMLFIND if test -n "$OCAMLFIND"; then { echo "$as_me:$LINENO: result: $OCAMLFIND" >&5 echo "${ECHO_T}$OCAMLFIND" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi if test "$OCAMLFIND" = no ; then { { echo "$as_me:$LINENO: error: Cannot find ocamlfind." >&5 echo "$as_me: error: Cannot find ocamlfind." >&2;} { (exit 1); exit 1; }; } fi CAMLLIBPATH=`$OCAMLC -where` ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="${ac_tool_prefix}gcc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { echo "$as_me:$LINENO: result: $CC" >&5 echo "${ECHO_T}$CC" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi fi if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CC="gcc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 echo "${ECHO_T}$ac_ct_CC" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&5 echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi else CC="$ac_cv_prog_CC" fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="${ac_tool_prefix}cc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { echo "$as_me:$LINENO: result: $CC" >&5 echo "${ECHO_T}$CC" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi fi fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else ac_prog_rejected=no as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift if test $# != 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" fi fi fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { echo "$as_me:$LINENO: result: $CC" >&5 echo "${ECHO_T}$CC" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then for ac_prog in cl.exe do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { echo "$as_me:$LINENO: result: $CC" >&5 echo "${ECHO_T}$CC" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi test -n "$CC" && break done fi if test -z "$CC"; then ac_ct_CC=$CC for ac_prog in cl.exe do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CC="$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 echo "${ECHO_T}$ac_ct_CC" >&6; } else { echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6; } fi test -n "$ac_ct_CC" && break done if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&5 echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi fi fi test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH See \`config.log' for more details." >&5 echo "$as_me: error: no acceptable C compiler found in \$PATH See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } # Provide some information about the compiler. echo "$as_me:$LINENO: checking for C compiler version" >&5 ac_compiler=`set X $ac_compile; echo $2` { (ac_try="$ac_compiler --version >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compiler --version >&5") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } { (ac_try="$ac_compiler -v >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compiler -v >&5") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } { (ac_try="$ac_compiler -V >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compiler -V >&5") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files a.out a.exe b.out" # Try to create an executable without -o first, disregard a.out. # It will help us diagnose broken compilers, and finding out an intuition # of exeext. { echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; } ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` # # List of possible output files, starting from the most likely. # The algorithm is not robust to junk in `.', hence go to wildcards (a.*) # only as a last resort. b.out is created by i960 compilers. ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out' # # The IRIX 6 linker writes into existing files which may not be # executable, retaining their permissions. Remove them first so a # subsequent execution test works. ac_rmfiles= for ac_file in $ac_files do case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; * ) ac_rmfiles="$ac_rmfiles $ac_file";; esac done rm -f $ac_rmfiles if { (ac_try="$ac_link_default" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_link_default") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. # So ignore a value of `no', otherwise this would lead to `EXEEXT = no' # in a Makefile. We should not override ac_cv_exeext if it was cached, # so that the user can short-circuit this test for compilers unknown to # Autoconf. for ac_file in $ac_files '' do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; [ab].out ) # We found the default executable, but exeext='' is most # certainly right. break;; *.* ) if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; then :; else ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` fi # We set ac_cv_exeext here because the later test for it is not # safe: cross compilers may not add the suffix if given an `-o' # argument, so we may need to know it at that point already. # Even if this section looks crufty: it has the advantage of # actually working. break;; * ) break;; esac done test "$ac_cv_exeext" = no && ac_cv_exeext= else ac_file='' fi { echo "$as_me:$LINENO: result: $ac_file" >&5 echo "${ECHO_T}$ac_file" >&6; } if test -z "$ac_file"; then echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { echo "$as_me:$LINENO: error: C compiler cannot create executables See \`config.log' for more details." >&5 echo "$as_me: error: C compiler cannot create executables See \`config.log' for more details." >&2;} { (exit 77); exit 77; }; } fi ac_exeext=$ac_cv_exeext # Check that the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. { echo "$as_me:$LINENO: checking whether the C compiler works" >&5 echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; } # FIXME: These cross compiler hacks should be removed for Autoconf 3.0 # If not cross compiling, check that we can run a simple program. if test "$cross_compiling" != yes; then if { ac_try='./$ac_file' { (case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then cross_compiling=no else if test "$cross_compiling" = maybe; then cross_compiling=yes else { { echo "$as_me:$LINENO: error: cannot run C compiled programs. If you meant to cross compile, use \`--host'. See \`config.log' for more details." >&5 echo "$as_me: error: cannot run C compiled programs. If you meant to cross compile, use \`--host'. See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } fi fi fi { echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6; } rm -f a.out a.exe conftest$ac_cv_exeext b.out ac_clean_files=$ac_clean_files_save # Check that the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. { echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; } { echo "$as_me:$LINENO: result: $cross_compiling" >&5 echo "${ECHO_T}$cross_compiling" >&6; } { echo "$as_me:$LINENO: checking for suffix of executables" >&5 echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; } if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_link") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then # If both `conftest.exe' and `conftest' are `present' (well, observable) # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will # work properly (i.e., refer to `conftest.exe'), while it won't with # `rm'. for ac_file in conftest.exe conftest conftest.*; do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` break;; * ) break;; esac done else { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link See \`config.log' for more details." >&5 echo "$as_me: error: cannot compute suffix of executables: cannot compile and link See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } fi rm -f conftest$ac_cv_exeext { echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 echo "${ECHO_T}$ac_cv_exeext" >&6; } rm -f conftest.$ac_ext EXEEXT=$ac_cv_exeext ac_exeext=$EXEEXT { echo "$as_me:$LINENO: checking for suffix of object files" >&5 echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; } if test "${ac_cv_objext+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.o conftest.obj if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then for ac_file in conftest.o conftest.obj conftest.*; do test -f "$ac_file" || continue; case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;; *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` break;; esac done else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile See \`config.log' for more details." >&5 echo "$as_me: error: cannot compute suffix of object files: cannot compile See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } fi rm -f conftest.$ac_cv_objext conftest.$ac_ext fi { echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 echo "${ECHO_T}$ac_cv_objext" >&6; } OBJEXT=$ac_cv_objext ac_objext=$OBJEXT { echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; } if test "${ac_cv_c_compiler_gnu+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { #ifndef __GNUC__ choke me #endif ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_compiler_gnu=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_compiler_gnu=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi { echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; } GCC=`test $ac_compiler_gnu = yes && echo yes` ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS { echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; } if test "${ac_cv_prog_cc_g+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_save_c_werror_flag=$ac_c_werror_flag ac_c_werror_flag=yes ac_cv_prog_cc_g=no CFLAGS="-g" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_prog_cc_g=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 CFLAGS="" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then : else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_c_werror_flag=$ac_save_c_werror_flag CFLAGS="-g" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_prog_cc_g=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_c_werror_flag=$ac_save_c_werror_flag fi { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; } if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then if test "$GCC" = yes; then CFLAGS="-g -O2" else CFLAGS="-g" fi else if test "$GCC" = yes; then CFLAGS="-O2" else CFLAGS= fi fi { echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; } if test "${ac_cv_prog_cc_c89+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_cv_prog_cc_c89=no ac_save_CC=$CC cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include #include #include /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ struct buf { int x; }; FILE * (*rcsopen) (struct buf *, struct stat *, int); static char *e (p, i) char **p; int i; { return p[i]; } static char *f (char * (*g) (char **, int), char **p, ...) { char *s; va_list v; va_start (v,p); s = g (p, va_arg (v,int)); va_end (v); return s; } /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has function prototypes and stuff, but not '\xHH' hex character constants. These don't provoke an error unfortunately, instead are silently treated as 'x'. The following induces an error, until -std is added to get proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an array size at least. It's necessary to write '\x00'==0 to get something that's true only with -std. */ int osf4_cc_array ['\x00' == 0 ? 1 : -1]; /* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters inside strings and character constants. */ #define FOO(x) 'x' int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; int test (int i, double x); struct s1 {int (*f) (int a);}; struct s2 {int (*f) (double a);}; int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); int argc; char **argv; int main () { return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; ; return 0; } _ACEOF for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_prog_cc_c89=$ac_arg else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext test "x$ac_cv_prog_cc_c89" != "xno" && break done rm -f conftest.$ac_ext CC=$ac_save_CC fi # AC_CACHE_VAL case "x$ac_cv_prog_cc_c89" in x) { echo "$as_me:$LINENO: result: none needed" >&5 echo "${ECHO_T}none needed" >&6; } ;; xno) { echo "$as_me:$LINENO: result: unsupported" >&5 echo "${ECHO_T}unsupported" >&6; } ;; *) CC="$CC $ac_cv_prog_cc_c89" { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;; esac ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu # libmagic detection (put in CLIB) { echo "$as_me:$LINENO: checking for libmagic" >&5 echo $ECHO_N "checking for libmagic... $ECHO_C" >&6; } LIBS="$LIBS -lmagic" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include int main () { magic_open(MAGIC_NONE) ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && $as_test_x conftest$ac_exeext; then { echo "$as_me:$LINENO: result: found" >&5 echo "${ECHO_T}found" >&6; }; CLIBS="$CLIBS magic" else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { echo "$as_me:$LINENO: error: Check for magic-library failed." >&5 echo "$as_me: error: Check for magic-library failed." >&2;} { (exit 1); exit 1; }; } fi rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext if test "$OCAMLOPT" = no ; then BEST=byte else BEST="byte opt" fi for ac_func in strerror_r do as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` { echo "$as_me:$LINENO: checking for $ac_func" >&5 echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Define $ac_func to an innocuous variant, in case declares $ac_func. For example, HP-UX 11i declares gettimeofday. */ #define $ac_func innocuous_$ac_func /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef $ac_func /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char $ac_func (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined __stub_$ac_func || defined __stub___$ac_func choke me #endif int main () { return $ac_func (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && $as_test_x conftest$ac_exeext; then eval "$as_ac_var=yes" else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 eval "$as_ac_var=no" fi rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext fi ac_res=`eval echo '${'$as_ac_var'}'` { echo "$as_me:$LINENO: result: $ac_res" >&5 echo "${ECHO_T}$ac_res" >&6; } if test `eval echo '${'$as_ac_var'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF CFLAGS="$CFLAGS -DHAVE_STRERROR_R" fi done # substitutions to perform all_requires="`ocamlfind query -r -separator " " -format "%p" $requires` $_requires" # Finally create the Makefile and samples ac_config_files="$ac_config_files Makefile" ac_config_files="$ac_config_files src/META" ac_config_files="$ac_config_files src/Makefile" ac_config_files="$ac_config_files examples/Makefile" cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure # scripts and configure runs, see configure's option --config-cache. # It is not useful on other systems. If it contains results you don't # want to keep, you may remove or edit it. # # config.status only pays attention to the cache file if you give it # the --recheck option to rerun configure. # # `ac_cv_env_foo' variables (set or unset) will be overridden when # loading this file, other *unset* `ac_cv_foo' will be assigned the # following values. _ACEOF # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. # So, we kill variables containing newlines. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. ( for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( *) $as_unset $ac_var ;; esac ;; esac done (set) 2>&1 | case $as_nl`(ac_space=' '; set) 2>&1` in #( *${as_nl}ac_space=\ *) # `set' does not quote correctly, so add quotes (double-quote # substitution turns \\\\ into \\, and sed turns \\ into \). sed -n \ "s/'/'\\\\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" ;; #( *) # `set' quotes correctly as required by POSIX, so do not add quotes. sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; esac | sort ) | sed ' /^ac_cv_env_/b end t clear :clear s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ t end s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ :end' >>confcache if diff "$cache_file" confcache >/dev/null 2>&1; then :; else if test -w "$cache_file"; then test "x$cache_file" != "x/dev/null" && { echo "$as_me:$LINENO: updating cache $cache_file" >&5 echo "$as_me: updating cache $cache_file" >&6;} cat confcache >$cache_file else { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 echo "$as_me: not updating unwritable cache $cache_file" >&6;} fi fi rm -f confcache test "x$prefix" = xNONE && prefix=$ac_default_prefix # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' # Transform confdefs.h into DEFS. # Protect against shell expansion while executing Makefile rules. # Protect against Makefile macro expansion. # # If the first sed substitution is executed (which looks for macros that # take arguments), then branch to the quote section. Otherwise, # look for a macro that doesn't take arguments. ac_script=' t clear :clear s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g t quote s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g t quote b any :quote s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g s/\[/\\&/g s/\]/\\&/g s/\$/$$/g H :any ${ g s/^\n// s/\n/ /g p } ' DEFS=`sed -n "$ac_script" confdefs.h` ac_libobjs= ac_ltlibobjs= for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue # 1. Remove the extension, and $U if already installed. ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' ac_i=`echo "$ac_i" | sed "$ac_script"` # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR # will be set to the directory where LIBOBJS objects are built. ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' done LIBOBJS=$ac_libobjs LTLIBOBJS=$ac_ltlibobjs : ${CONFIG_STATUS=./config.status} ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files $CONFIG_STATUS" { echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 echo "$as_me: creating $CONFIG_STATUS" >&6;} cat >$CONFIG_STATUS <<_ACEOF #! $SHELL # Generated by $as_me. # Run this file to recreate the current configuration. # Compiler output produced by configure, useful for debugging # configure, is in config.log if it exists. debug=false ac_cs_recheck=false ac_cs_silent=false SHELL=\${CONFIG_SHELL-$SHELL} _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF ## --------------------- ## ## M4sh Initialization. ## ## --------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac fi # PATH needs CR # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then echo "#! /bin/sh" >conf$$.sh echo "exit 0" >>conf$$.sh chmod +x conf$$.sh if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi rm -f conf$$.sh fi # Support unset when possible. if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then as_unset=unset else as_unset=false fi # IFS # We need space, tab and new line, in precisely that order. Quoting is # there to prevent editors from complaining about space-tab. # (If _AS_PATH_WALK were called with IFS unset, it would disable word # splitting by setting IFS to empty value.) as_nl=' ' IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. case $0 in *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done IFS=$as_save_IFS ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 { (exit 1); exit 1; } fi # Work around bugs in pre-3.0 UWIN ksh. for as_var in ENV MAIL MAILPATH do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. for as_var in \ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ LC_TELEPHONE LC_TIME do if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then eval $as_var=C; export $as_var else ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var fi done # Required to use basename. if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi # Name of the executable. as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` # CDPATH. $as_unset CDPATH as_lineno_1=$LINENO as_lineno_2=$LINENO test "x$as_lineno_1" != "x$as_lineno_2" && test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { # Create $as_me.lineno as a copy of $as_myself, but with $LINENO # uniformly replaced by the line number. The first 'sed' inserts a # line-number line after each line using $LINENO; the second 'sed' # does the real work. The second script uses 'N' to pair each # line-number line with the line containing $LINENO, and appends # trailing '-' during substitution so that $LINENO is not a special # case at line end. # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the # scripts with optimization help from Paolo Bonzini. Blame Lee # E. McMahon (1931-1989) for sed's syntax. :-) sed -n ' p /[$]LINENO/= ' <$as_myself | sed ' s/[$]LINENO.*/&-/ t lineno b :lineno N :loop s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ t loop s/-\n.*// ' >$as_me.lineno && chmod +x "$as_me.lineno" || { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 { (exit 1); exit 1; }; } # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the # original and so on. Autoconf is especially sensitive to this). . "./$as_me.lineno" # Exit status is that of the last command. exit } if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then as_dirname=dirname else as_dirname=false fi ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in -n*) case `echo 'x\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. *) ECHO_C='\c';; esac;; *) ECHO_N='-n';; esac if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir mkdir conf$$.dir fi echo >conf$$.file if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. # In both cases, we have to default to `cp -p'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -p' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -p' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null if mkdir -p . 2>/dev/null; then as_mkdir_p=: else test -d ./-p && rmdir ./-p as_mkdir_p=false fi if test -x / >/dev/null 2>&1; then as_test_x='test -x' else if ls -dL / >/dev/null 2>&1; then as_ls_L_option=L else as_ls_L_option= fi as_test_x=' eval sh -c '\'' if test -d "$1"; then test -d "$1/."; else case $1 in -*)set "./$1";; esac; case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in ???[sx]*):;;*)false;;esac;fi '\'' sh ' fi as_executable_p=$as_test_x # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" exec 6>&1 # Save the log message, to keep $[0] and so on meaningful, and to # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" This file was extended by ocaml-magic $as_me 0.7.3, which was generated by GNU Autoconf 2.61. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS CONFIG_LINKS = $CONFIG_LINKS CONFIG_COMMANDS = $CONFIG_COMMANDS $ $0 $@ on `(hostname || uname -n) 2>/dev/null | sed 1q` " _ACEOF cat >>$CONFIG_STATUS <<_ACEOF # Files that config.status was made for. config_files="$ac_config_files" _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF ac_cs_usage="\ \`$as_me' instantiates files from templates according to the current configuration. Usage: $0 [OPTIONS] [FILE]... -h, --help print this help, then exit -V, --version print version number and configuration settings, then exit -q, --quiet do not print progress messages -d, --debug don't remove temporary files --recheck update $as_me by reconfiguring in the same conditions --file=FILE[:TEMPLATE] instantiate the configuration file FILE Configuration files: $config_files Report bugs to ." _ACEOF cat >>$CONFIG_STATUS <<_ACEOF ac_cs_version="\\ ocaml-magic config.status 0.7.3 configured by $0, generated by GNU Autoconf 2.61, with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" Copyright (C) 2006 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." ac_pwd='$ac_pwd' srcdir='$srcdir' _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF # If no file are specified by the user, then we need to provide default # value. By we need to know if files were specified by the user. ac_need_defaults=: while test $# != 0 do case $1 in --*=*) ac_option=`expr "X$1" : 'X\([^=]*\)='` ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` ac_shift=: ;; *) ac_option=$1 ac_optarg=$2 ac_shift=shift ;; esac case $ac_option in # Handling of the options. -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ac_cs_recheck=: ;; --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) echo "$ac_cs_version"; exit ;; --debug | --debu | --deb | --de | --d | -d ) debug=: ;; --file | --fil | --fi | --f ) $ac_shift CONFIG_FILES="$CONFIG_FILES $ac_optarg" ac_need_defaults=false;; --he | --h | --help | --hel | -h ) echo "$ac_cs_usage"; exit ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil | --si | --s) ac_cs_silent=: ;; # This is an error. -*) { echo "$as_me: error: unrecognized option: $1 Try \`$0 --help' for more information." >&2 { (exit 1); exit 1; }; } ;; *) ac_config_targets="$ac_config_targets $1" ac_need_defaults=false ;; esac shift done ac_configure_extra_args= if $ac_cs_silent; then exec 6>/dev/null ac_configure_extra_args="$ac_configure_extra_args --silent" fi _ACEOF cat >>$CONFIG_STATUS <<_ACEOF if \$ac_cs_recheck; then echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 CONFIG_SHELL=$SHELL export CONFIG_SHELL exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion fi _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF exec 5>>config.log { echo sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX ## Running $as_me. ## _ASBOX echo "$ac_log" } >&5 _ACEOF cat >>$CONFIG_STATUS <<_ACEOF _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF # Handling of arguments. for ac_config_target in $ac_config_targets do case $ac_config_target in "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; "src/META") CONFIG_FILES="$CONFIG_FILES src/META" ;; "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; "examples/Makefile") CONFIG_FILES="$CONFIG_FILES examples/Makefile" ;; *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 echo "$as_me: error: invalid argument: $ac_config_target" >&2;} { (exit 1); exit 1; }; };; esac done # If the user did not use the arguments to specify the items to instantiate, # then the envvar interface is used. Set only those that are not. # We use the long form for the default assignment because of an extremely # bizarre bug on SunOS 4.1.3. if $ac_need_defaults; then test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files fi # Have a temporary directory for convenience. Make it in the build tree # simply because there is no reason against having it here, and in addition, # creating and moving files from /tmp can sometimes cause problems. # Hook for its removal unless debugging. # Note that there is a small window in which the directory will not be cleaned: # after its creation but before its name has been assigned to `$tmp'. $debug || { tmp= trap 'exit_status=$? { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status ' 0 trap '{ (exit 1); exit 1; }' 1 2 13 15 } # Create a (secure) tmp directory for tmp files. { tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" } || { tmp=./conf$$-$RANDOM (umask 077 && mkdir "$tmp") } || { echo "$me: cannot create a temporary directory in ." >&2 { (exit 1); exit 1; } } # # Set up the sed scripts for CONFIG_FILES section. # # No need to generate the scripts if there are no CONFIG_FILES. # This happens for instance when ./config.status config.h if test -n "$CONFIG_FILES"; then _ACEOF ac_delim='%!_!# ' for ac_last_try in false false false false false :; do cat >conf$$subs.sed <<_ACEOF SHELL!$SHELL$ac_delim PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim PACKAGE_NAME!$PACKAGE_NAME$ac_delim PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim PACKAGE_STRING!$PACKAGE_STRING$ac_delim PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim exec_prefix!$exec_prefix$ac_delim prefix!$prefix$ac_delim program_transform_name!$program_transform_name$ac_delim bindir!$bindir$ac_delim sbindir!$sbindir$ac_delim libexecdir!$libexecdir$ac_delim datarootdir!$datarootdir$ac_delim datadir!$datadir$ac_delim sysconfdir!$sysconfdir$ac_delim sharedstatedir!$sharedstatedir$ac_delim localstatedir!$localstatedir$ac_delim includedir!$includedir$ac_delim oldincludedir!$oldincludedir$ac_delim docdir!$docdir$ac_delim infodir!$infodir$ac_delim htmldir!$htmldir$ac_delim dvidir!$dvidir$ac_delim pdfdir!$pdfdir$ac_delim psdir!$psdir$ac_delim libdir!$libdir$ac_delim localedir!$localedir$ac_delim mandir!$mandir$ac_delim DEFS!$DEFS$ac_delim ECHO_C!$ECHO_C$ac_delim ECHO_N!$ECHO_N$ac_delim ECHO_T!$ECHO_T$ac_delim LIBS!$LIBS$ac_delim build_alias!$build_alias$ac_delim host_alias!$host_alias$ac_delim target_alias!$target_alias$ac_delim OCAMLC!$OCAMLC$ac_delim OCAMLOPT!$OCAMLOPT$ac_delim OCAMLCDOTOPT!$OCAMLCDOTOPT$ac_delim OCAMLOPTDOTOPT!$OCAMLOPTDOTOPT$ac_delim OCAMLDEP!$OCAMLDEP$ac_delim OCAMLDOC!$OCAMLDOC$ac_delim OCAMLFIND!$OCAMLFIND$ac_delim CC!$CC$ac_delim CFLAGS!$CFLAGS$ac_delim LDFLAGS!$LDFLAGS$ac_delim CPPFLAGS!$CPPFLAGS$ac_delim ac_ct_CC!$ac_ct_CC$ac_delim EXEEXT!$EXEEXT$ac_delim OBJEXT!$OBJEXT$ac_delim VERSION!$VERSION$ac_delim OCAMLBEST!$OCAMLBEST$ac_delim OCAMLVERSION!$OCAMLVERSION$ac_delim OCAMLLIB!$OCAMLLIB$ac_delim OCAMLBIN!$OCAMLBIN$ac_delim OCAMLFIND_LDCONF!$OCAMLFIND_LDCONF$ac_delim OCAMLCP!$OCAMLCP$ac_delim CAMLLIBPATH!$CAMLLIBPATH$ac_delim BEST!$BEST$ac_delim INC!$INC$ac_delim CLIBS!$CLIBS$ac_delim requires!$requires$ac_delim all_requires!$all_requires$ac_delim LIBOBJS!$LIBOBJS$ac_delim LTLIBOBJS!$LTLIBOBJS$ac_delim _ACEOF if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 66; then break elif $ac_last_try; then { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} { (exit 1); exit 1; }; } else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi done ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` if test -n "$ac_eof"; then ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` ac_eof=`expr $ac_eof + 1` fi cat >>$CONFIG_STATUS <<_ACEOF cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof /@[a-zA-Z_][a-zA-Z_0-9]*@/!b end _ACEOF sed ' s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g s/^/s,@/; s/!/@,|#_!!_#|/ :n t n s/'"$ac_delim"'$/,g/; t s/$/\\/; p N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n ' >>$CONFIG_STATUS >$CONFIG_STATUS <<_ACEOF :end s/|#_!!_#|//g CEOF$ac_eof _ACEOF # VPATH may cause trouble with some makes, so we remove $(srcdir), # ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and # trailing colons and then remove the whole line if VPATH becomes empty # (actually we leave an empty line to preserve line numbers). if test "x$srcdir" = x.; then ac_vpsub='/^[ ]*VPATH[ ]*=/{ s/:*\$(srcdir):*/:/ s/:*\${srcdir}:*/:/ s/:*@srcdir@:*/:/ s/^\([^=]*=[ ]*\):*/\1/ s/:*$// s/^[^=]*=[ ]*$// }' fi cat >>$CONFIG_STATUS <<\_ACEOF fi # test -n "$CONFIG_FILES" for ac_tag in :F $CONFIG_FILES do case $ac_tag in :[FHLC]) ac_mode=$ac_tag; continue;; esac case $ac_mode$ac_tag in :[FHL]*:*);; :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5 echo "$as_me: error: Invalid tag $ac_tag." >&2;} { (exit 1); exit 1; }; };; :[FH]-) ac_tag=-:-;; :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; esac ac_save_IFS=$IFS IFS=: set x $ac_tag IFS=$ac_save_IFS shift ac_file=$1 shift case $ac_mode in :L) ac_source=$1;; :[FH]) ac_file_inputs= for ac_f do case $ac_f in -) ac_f="$tmp/stdin";; *) # Look for the file first in the build tree, then in the source tree # (if the path is not absolute). The absolute path cannot be DOS-style, # because $ac_f cannot contain `:'. test -f "$ac_f" || case $ac_f in [\\/$]*) false;; *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; esac || { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 echo "$as_me: error: cannot find input file: $ac_f" >&2;} { (exit 1); exit 1; }; };; esac ac_file_inputs="$ac_file_inputs $ac_f" done # Let's still pretend it is `configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ configure_input="Generated from "`IFS=: echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure." if test x"$ac_file" != x-; then configure_input="$ac_file. $configure_input" { echo "$as_me:$LINENO: creating $ac_file" >&5 echo "$as_me: creating $ac_file" >&6;} fi case $ac_tag in *:-:* | *:-) cat >"$tmp/stdin";; esac ;; esac ac_dir=`$as_dirname -- "$ac_file" || $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_file" : 'X\(//\)[^/]' \| \ X"$ac_file" : 'X\(//\)$' \| \ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || echo X"$ac_file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` { as_dir="$ac_dir" case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 echo "$as_me: error: cannot create directory $as_dir" >&2;} { (exit 1); exit 1; }; }; } ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix case $ac_mode in :F) # # CONFIG_FILE # _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF # If the template does not know about datarootdir, expand it. # FIXME: This hack should be removed a few years after 2.60. ac_datarootdir_hack=; ac_datarootdir_seen= case `sed -n '/datarootdir/ { p q } /@datadir@/p /@docdir@/p /@infodir@/p /@localedir@/p /@mandir@/p ' $ac_file_inputs` in *datarootdir*) ac_datarootdir_seen=yes;; *@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} _ACEOF cat >>$CONFIG_STATUS <<_ACEOF ac_datarootdir_hack=' s&@datadir@&$datadir&g s&@docdir@&$docdir&g s&@infodir@&$infodir&g s&@localedir@&$localedir&g s&@mandir@&$mandir&g s&\\\${datarootdir}&$datarootdir&g' ;; esac _ACEOF # Neutralize VPATH when `$srcdir' = `.'. # Shell code in configure.ac might set extrasub. # FIXME: do we really want to maintain this feature? cat >>$CONFIG_STATUS <<_ACEOF sed "$ac_vpsub $extrasub _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF :t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b s&@configure_input@&$configure_input&;t t s&@top_builddir@&$ac_top_builddir_sub&;t t s&@srcdir@&$ac_srcdir&;t t s&@abs_srcdir@&$ac_abs_srcdir&;t t s&@top_srcdir@&$ac_top_srcdir&;t t s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t s&@builddir@&$ac_builddir&;t t s&@abs_builddir@&$ac_abs_builddir&;t t s&@abs_top_builddir@&$ac_abs_top_builddir&;t t $ac_datarootdir_hack " $ac_file_inputs | sed -f "$tmp/subs-1.sed" >$tmp/out test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined." >&5 echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined." >&2;} rm -f "$tmp/stdin" case $ac_file in -) cat "$tmp/out"; rm -f "$tmp/out";; *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;; esac ;; esac case $ac_file$ac_mode in "Makefile":F) chmod a-w Makefile ;; esac done # for ac_tag { (exit 0); exit 0; } _ACEOF chmod +x $CONFIG_STATUS ac_clean_files=$ac_clean_files_save # configure is writing to config.log, and then calls config.status. # config.status does its own redirection, appending to config.log. # Unfortunately, on DOS this fails, as config.log is still kept open # by configure, so config.status won't be able to write to it; its # output is simply discarded. So we exec the FD to /dev/null, # effectively closing config.log, so it can be properly (re)opened and # appended to by config.status. When coming back to configure, we # need to make the FD available again. if test "$no_create" != yes; then ac_cs_success=: ac_config_status_args= test "$silent" = yes && ac_config_status_args="$ac_config_status_args --quiet" exec 5>/dev/null $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. $ac_cs_success || { (exit 1); exit 1; } fi ocaml-magic-0.7.3/Makefile.in0000644000175000017500000000334710771543605014440 0ustar trchtrch# $Id: Makefile.in,v 1.7 2008/03/23 21:11:33 chris_77 Exp $ PKG_NAME := ocaml-magic DISTFILES := ChangeLog INSTALL LICENSE README \ bootstrap configure.ac configure Makefile.in OCamlMakefile \ src/*.ml src/*.mli src/*.c src/Makefile.in src/META.in \ examples/*.ml examples/Makefile.in VERSION = @VERSION@ PKG_TARBALL = $(PKG_NAME)-$(VERSION).tar.gz # Web site locally and on sourceforge: SRC_WEB = web SF_WEB = /home/groups/o/oc/ocaml-magic/htdocs .PHONY: all byte opt install uninstall examples all byte opt install uninstall: $(MAKE) -C src $@ examples: all $(MAKE) -C examples all distclean: clean $(MAKE) -C examples clean .PHONY: dist doc doc: $(MAKE) -C src htdoc mkdir -p doc $(RM) -r doc/html mv src/doc/magic/html doc $(RM) -r src/doc dist: -$(RM) -r $(PKG_NAME)-$(VERSION) mkdir $(PKG_NAME)-$(VERSION) cp -r --preserve --parents $(DISTFILES) $(PKG_NAME)-$(VERSION) tar zcvf $(PKG_TARBALL) $(PKG_NAME)-$(VERSION) $(RM) -rf $(PKG_NAME)-$(VERSION) # Release a Sourceforge tarball and publish the HTML doc .PHONY: web upload web: doc @if [ -d doc ] ; then \ scp -r doc/ shell.sf.net:$(SF_WEB)/ \ && echo "--- Published documentation on SF" ; \ fi @ if [ -d $(SRC_WEB)/ ] ; then \ scp $(SRC_WEB)/*.html $(SRC_WEB)/*.jpg LICENSE \ shell.sf.net:$(SF_WEB) \ && echo "--- Published web site (in $(SRC_WEB)/) on SF" ; \ fi upload: dist @ if [ -z "$(PKG_TARBALL)" ]; then \ echo "PKG_TARBALL not defined"; exit 1; fi echo -e "bin\ncd incoming\nput $(PKG_TARBALL)" \ | ncftp -p chris_77@users.sf.net upload.sourceforge.net \ && echo "--- Uploaded $(PKG_TARBALL) to SF" clean:: $(RM) *~ config.log config.status $(PKG_TARBALL) $(RM) -r autom4te.cache/ doc/ $(MAKE) -C src clean $(MAKE) -C examples clean ocaml-magic-0.7.3/INSTALL0000644000175000017500000000077510771473005013422 0ustar trchtrch0. Perquisites You need * Ocaml (>= 3.07) * libmagic (the package libmagic-dev for Debian) 1. Compilation ./configure to check for dependencies make for the target(s) supported by your platform make byte for the bytecode library make opt for the native code library 2. Installation (requires ocamlfind) make install install the library 3. Example make examples compile examples 4. Documentation make doc build the documentation in the doc sudirectory ocaml-magic-0.7.3/README0000644000175000017500000000065310771472117013247 0ustar trchtrch# +STARTUP: showall -*-org-*- * OCaml Magic ** What is OCaml magic It is a binding to libmagic tries to classify files using various tests (filesystem tests, magic number tests, and language tests). ** Installation See the file INSTALL. ** Latest version See https://sourceforge.net/projects/ocaml-magic ** Author Christophe TROESTLER ocaml-magic-0.7.3/configure.ac0000644000175000017500000000761710771672672014674 0ustar trchtrch# check for one particular file of the sources. Keep the version in sync # with src/magic.mli AC_INIT(ocaml-magic, 0.7.3, chris_77@users.sourceforge.net) VERSION=$PACKAGE_VERSION AC_MSG_RESULT([configuring $PACKAGE_STRING]) OCAMLFIND_LDCONF="" AC_ARG_ENABLE([ldconf], AC_HELP_STRING([--disable-ldconf],[don't modify the dynamic loader configuration file (default is enable)]),[ac_enable_ldconf=$enableval],[ac_enable_ldconf=$enableval],[ac_enable_ldconf=yes]) if test "$ac_enable_ldconf" = no ; then AC_MSG_RESULT([disabling modification of ld.conf]) OCAMLFIND_LDCONF=dummy fi # Check for Ocaml compilers # we first look for ocamlc in the path; if not present, we fail AC_CHECK_PROG(OCAMLC,ocamlc,`which ocamlc`,no) if test "$OCAMLC" = no ; then AC_MSG_ERROR(Cannot find ocamlc.) fi # we look for the directory of ocamlc in $OCAMLC OCAMLBIN=`dirname $OCAMLC` # we extract Ocaml version number and library path OCAMLVERSION=`$OCAMLC -v | sed -n -e 's|.*version* *\(.*\)$|\1|p' ` echo "ocaml version is $OCAMLVERSION" OCAMLLIB=`$OCAMLC -v | tail -n 1 | cut -f 4 -d " "` echo "ocaml library path is $OCAMLLIB" # then we look for ocamlopt; if not present, we issue a warning # if the version is not the same, we also discard it # we set OCAMLBEST to "opt" or "byte", whether ocamlopt is available or not AC_PATH_PROG(OCAMLOPT,ocamlopt,no) OCAMLBEST=byte if test "$OCAMLOPT" = no ; then AC_MSG_WARN(Cannot find ocamlopt; bytecode compilation only.) else AC_MSG_CHECKING(ocamlopt version) TMPVERSION=`$OCAMLOPT -v | sed -n -e 's|.*version* *\(.*\)$|\1|p' ` if test "$TMPVERSION" != "$OCAMLVERSION" ; then AC_MSG_RESULT(differs from ocamlc; ocamlopt discarded.) OCAMLOPT=no else AC_MSG_RESULT(ok) OCAMLBEST=opt fi fi # checking for ocamlc.opt AC_PATH_PROG(OCAMLCDOTOPT,ocamlc.opt,no) if test "$OCAMLCDOTOPT" != no ; then AC_MSG_CHECKING(ocamlc.opt version) TMPVERSION=`$OCAMLCDOTOPT -v | sed -n -e 's|.*version* *\(.*\)$|\1|p' ` if test "$TMPVERSION" != "$OCAMLVERSION" ; then AC_MSG_RESULT(differs from ocamlc; ocamlc.opt discarded.) else AC_MSG_RESULT(ok) OCAMLC=$OCAMLCDOTOPT fi fi # checking for ocamlopt.opt if test "$OCAMLOPT" != no ; then AC_PATH_PROG(OCAMLOPTDOTOPT,ocamlopt.opt,no) if test "$OCAMLOPTDOTOPT" != no ; then AC_MSG_CHECKING(ocamlc.opt version) TMPVER=`$OCAMLOPTDOTOPT -v | sed -n -e 's|.*version* *\(.*\)$|\1|p' ` if test "$TMPVER" != "$OCAMLVERSION" ; then AC_MSG_RESULT(differs from ocamlc; ocamlopt.opt discarded.) else AC_MSG_RESULT(ok) OCAMLOPT=$OCAMLOPTDOTOPT fi fi fi AC_PATH_PROG(OCAMLDEP,ocamldep,no) if test "$OCAMLDEP" = no ; then AC_MSG_ERROR(Cannot find ocamldep.) fi AC_PATH_PROG(OCAMLDOC,ocamldoc,no) AC_PATH_PROG(OCAMLFIND,ocamlfind,no) if test "$OCAMLFIND" = no ; then AC_MSG_ERROR(Cannot find ocamlfind.) fi CAMLLIBPATH=`$OCAMLC -where` AC_PROG_CC() # libmagic detection (put in CLIB) AC_MSG_CHECKING([for libmagic]) LIBS="$LIBS -lmagic" AC_TRY_LINK([#include ], [magic_open(MAGIC_NONE)], [AC_MSG_RESULT([found]); CLIBS="$CLIBS magic"], [AC_MSG_ERROR([Check for magic-library failed.])]) if test "$OCAMLOPT" = no ; then BEST=byte else BEST="byte opt" fi AC_CHECK_FUNCS(strerror_r, [CFLAGS="$CFLAGS -DHAVE_STRERROR_R"]) # substitutions to perform AC_SUBST(VERSION) AC_SUBST(OCAMLC) AC_SUBST(OCAMLOPT) AC_SUBST(OCAMLDEP) AC_SUBST(OCAMLBEST) AC_SUBST(OCAMLVERSION) AC_SUBST(OCAMLLIB) AC_SUBST(OCAMLBIN) AC_SUBST(OCAMLDOC) AC_SUBST(OCAMLFIND) AC_SUBST(OCAMLFIND_LDCONF) AC_SUBST(OCAMLCP) AC_SUBST(CAMLLIBPATH) AC_SUBST(BEST) AC_SUBST(INC) AC_SUBST(CLIBS) AC_SUBST(CFLAGS) AC_SUBST(requires) all_requires="`ocamlfind query -r -separator " " -format "%p" $requires` $_requires" AC_SUBST(all_requires) # Finally create the Makefile and samples AC_CONFIG_FILES([Makefile],[chmod a-w Makefile]) AC_CONFIG_FILES([src/META]) AC_CONFIG_FILES([src/Makefile]) AC_CONFIG_FILES([examples/Makefile]) AC_OUTPUT