./PaxHeaders/image-acquisition-0.2.60000644000000000000000000000013214664627207014303 xustar0030 mtime=1725116039.520927946 30 atime=1725116039.688927658 30 ctime=1725116039.688927658 image-acquisition-0.2.6/0000755000175000017500000000000014664627207015115 5ustar00andyandy00000000000000image-acquisition-0.2.6/PaxHeaders/doc0000644000000000000000000000013214664627207014713 xustar0030 mtime=1725116039.500927981 30 atime=1725116039.688927658 30 ctime=1725116039.688927658 image-acquisition-0.2.6/doc/0000755000175000017500000000000014664627207015662 5ustar00andyandy00000000000000image-acquisition-0.2.6/doc/PaxHeaders/README0000644000000000000000000000006214664627164015654 xustar0020 atime=1725116020 30 ctime=1725116039.688927658 image-acquisition-0.2.6/doc/README0000644000175000017500000001401614664627164016546 0ustar00andyandy00000000000000This is a copy of http://wiki.octave.org/Image_acquisition_package intended for users without internet connection or offline reading. The {{Forge|image-acquisition}} package is part of the [[Octave Forge]] project. Build dependencies for Debian GNU/Linux are '''libv4l-dev''' and '''libfltk1.3-dev''' or '''libfltk1.1-dev'''. You can install it on GNU/Linux in octave with octave> pkg install -forge image-acquisition If you see complains about a missing mkoctfile: [[FAQ#I_cannot_install_a_package._Octave_complains_about_a_missing_mkoctfile.]] If you want to report a bug: [[Image_acquisition_package#Reporting_bugs]] == Example session == Lines starting with "octave:>" are executed on the octave prompt. === Load the package and list available hardware === octave:> pkg load image-acquisition octave:> imaqhwinfo ans = scalar structure containing the fields: driver = uvcvideo card = UVC Camera (046d:0825) bus_info = usb-0000:00:12.2-4 version = 3.16.7 capabilities = 2.2314e+09 device = /dev/video0 === Open the v4l2 device and output the result === octave:> obj = videoinput("v4l2", "/dev/video0") obj = videoinput for v4l2 device = /dev/video0 driver = uvcvideo card = UVC Camera (046d:0825) VideoInput = 0 VideoResolution = 320 x 240 px VideoFormat = YUYV === Query which properties are available for the used device === The first 8 ones, starting with an upper letter are fixed, the other specific to the used v4l2 device. octave:> get(obj) ans = { [1,1] = SelectedSourceName [2,1] = ReturnedColorSpace [3,1] = BayerSensorAlignment [4,1] = DeviceCapabilities [5,1] = VideoInput [6,1] = VideoResolution [7,1] = VideoFrameInterval [8,1] = VideoFormat [9,1] = brightness [10,1] = contrast [11,1] = saturation [12,1] = white_balance_temperature_auto [13,1] = gain [14,1] = power_line_frequency [15,1] = white_balance_temperature [16,1] = sharpness [17,1] = backlight_compensation [18,1] = exposure_auto [19,1] = exposure_absolute [20,1] = exposure_auto_priority } === Set VideoFormat to RGB3 aka RGB24 === octave:> set(obj, "VideoFormat", "RGB3"); === List available video resolutions === octave:> set(obj, "VideoResolution") ans = 640 480 160 120 176 144 320 176 320 240 352 288 432 240 544 288 640 360 752 416 800 448 800 600 864 480 960 544 960 720 1024 576 1184 656 1280 720 1280 960 === Set the video resolution to 320x240px === octave:> set(obj, "VideoResolution", [320 240]) === Get the current brightness value === octave:> get(obj, "brightness") ans = 100 === Query possible range for brightness === octave:> set(obj, "brightness") ans = scalar structure containing the fields: min = 0 max = 255 step = 1 default = 128 === Set a new value for brightness === octave:> set(obj, "brightness", 100) === Start preview === octave:> preview(obj) Close it with CTRL+C or with [X] on the preview window === Use higher resolution and start streaming with 2 buffers === octave:> set(obj, "VideoResolution", [640 480]); octave:> start(obj, 2) === Get an image from the buffers, view and save it === octave:> img = getsnapshot(obj); octave:> image(img) octave:> imwrite(img, "ex1_a.png") octave:> [img, seq, t] = getsnapshot(obj); octave:> seq seq = 1 octave:> t t = scalar structure containing the fields: tv_sec = 10281 tv_usec = 779303 === Stop streaming === octave:> stop(obj) == Using v4l2loopback for tests == If you don't have a v4l2 device but want to test the package you could create a loopback device: modprobe v4l2loopback gst-launch-0.10 videotestsrc ! v4l2sink device=/dev/video0 == Reporting bugs == Please install v4l2-ctl (for example from Debian package v4l-utils), run the following commands and attach the output. $ v4l2-ctl -w --list-devices $ v4l2-ctl -w -D $ v4l2-ctl -w -L $ v4l2-ctl -w -n $ v4l2-ctl -w --list-formats Enable libv4l2 logging: $ export LIBV4L2_LOG_FILENAME=libv4l2_debug.log Start octave and execute your commands/scripts which show the problem. Please include the whole octave session beginning with the start of octave. There might be some warnings like "warning: function xyz shadows a built-in function" at start. Exit octave and add libv4l2_debug.log to your bug report Consider running the included tests: octave> test @videoinput/videoinput octave> test @videoinput/get octave> test @videoinput/set octave> test @videoinput/getsnapshot == Build source from mercurial repository == '''Warning: You really should use the method described above if you are not sure what you are doing here.''' Get the source here [http://sourceforge.net/p/octave/image-acquisition/ci/default/tree/] and build it yourself. The build dependencies for Debian GNU/Linux wheezy are '''libv4l-dev''' and '''libfltk1.3-dev''' or '''libfltk1.1-dev'''. You also need the GNU autotools to generate the configure script. $ hg clone http://hg.code.sf.net/p/octave/image-acquisition octave-image-acquisition $ cd octave-image-acquisition/src/ && ./bootstrap $ cd ../.. $ tar czf image-acquisition.tar.gz octave-image-acquisition octave:>> pkg install -verbose image-acquisition.tar.gz == make check == If you have cloned the hg repo you can also run the test scripts to see if all works. $ cd octave-image-acquisition/devel $ make check octave -q run_tests.m ../src/__v4l2_handler__.cc........................ PASS 3/3 @videoinput/videoinput............................ PASS 1/1 @videoinput/get................................... PASS 4/4 @videoinput/set................................... PASS 7/7 @videoinput/getsnapshot........................... PASS 4/4 imaqhwinfo........................................ PASS 1/1 Summary: PASS 20 FAIL 0 If there are tests which FAIL, then please have a look at the generated fntest.log and add it to your bug report. image-acquisition-0.2.6/PaxHeaders/NEWS0000644000000000000000000000006214664627164014726 xustar0020 atime=1725116020 30 ctime=1725116039.688927658 image-acquisition-0.2.6/NEWS0000644000175000017500000000357214664627164015625 0ustar00andyandy00000000000000 Summary of important changes for image-acquisition 0.2.5 (2024/08/31): ------------------------------------------------------------------------ ** Bugfix release Octave version >= 6 removed error_state. Bug #63136) Ignore v4l2 Metadata Interface devices in imaqhwinfo. Example if /dev/video0 AND /dev/video1 are created simultaneously. Summary of important changes for image-acquisition 0.2.1 (2014/12/27): ------------------------------------------------------------------------ ** Support for VideoFormats - RAW Bayer SBGGR8, SGBRG8, SGRBG8, SRGGB8, SBGGR10, SGRBG10, SRGGB10, SBGGR12, SGBRG12, SGBRG12, SGRBG12, SRGGB12 - YVU420 aka YV12, YUV420 aka YV12, YUYV aka YUV 4:2:2 - MJPEG ** New functions: save_mjpeg_as_jpg.m: save MJPEG capture as JPEG SGRBGtoRGB.m: Convert RAW Bayer SGRBG to RGB without interpolation Summary of important changes for image-acquisition 0.1.3 (2014/03/06): ------------------------------------------------------------------------ ** new setter/getter for VideoFormat. This internally sets the pixelformat, see http://www.linuxtv.org/downloads/v4l-dvb-apis/pixfmt.html. You can use the short 4 char FOURCC format ('RGB3', 'YUYV', 'MJPG' etc.) or the long format, for example 'SGRBG12' instead of 'BA12'. Summary of minor changes for image-acquisition 0.1.2 (2014/01/28): ------------------------------------------------------------------------ ** Use of autoconf ** Fix to build with fltk1.1 ** Some fixes for tests with different cams ** Print warning if driver limits set values Summary of important changes for image-acquisition 0.1.0 (2014/01/18): ------------------------------------------------------------------------ ** Initial release. Most of the functions which are required to get/set properties, start/stop streaming, preview and capture images are implemented for v4l2 devices. image-acquisition-0.2.6/PaxHeaders/INDEX0000644000000000000000000000006214664627164015021 xustar0020 atime=1725116020 30 ctime=1725116039.688927658 image-acquisition-0.2.6/INDEX0000644000175000017500000000031414664627164015707 0ustar00andyandy00000000000000image >> Image acquisition list devices imaqhwinfo v4l2 input @videoinput/videoinput @videoinput/get @videoinput/set @videoinput/start @videoinput/preview @videoinput/getsnapshot @videoinput/stop image-acquisition-0.2.6/PaxHeaders/FIXME_update_v4l2_links0000644000000000000000000000006214664627164020433 xustar0020 atime=1725116020 30 ctime=1725116039.688927658 image-acquisition-0.2.6/FIXME_update_v4l2_links0000644000175000017500000000031414664627164021321 0ustar00andyandy00000000000000Almost all links to linuxtv.org are outdated, for example http://www.linuxtv.org/downloads/v4l-dvb-apis/vidioc-reqbufs.html is now https://www.kernel.org/doc/html/v4.9/media/uapi/v4l/vidioc-reqbufs.html image-acquisition-0.2.6/PaxHeaders/src0000644000000000000000000000013214664627207014735 xustar0030 mtime=1725116039.684927664 30 atime=1725116039.688927658 30 ctime=1725116039.688927658 image-acquisition-0.2.6/src/0000755000175000017500000000000014664627207015704 5ustar00andyandy00000000000000image-acquisition-0.2.6/src/PaxHeaders/cl_img_win.h0000644000000000000000000000006214664627164017276 xustar0020 atime=1725116020 30 ctime=1725116039.688927658 image-acquisition-0.2.6/src/cl_img_win.h0000644000175000017500000000327114664627164020171 0ustar00andyandy00000000000000// Copyright (C) 2014 Andreas Weber // // This program is free software; you can redistribute it and/or modify it under // the terms of the GNU General Public License as published by the Free Software // Foundation; either version 3 of the License, or (at your option) any later // version. // // This program is distributed in the hope that it will be useful, but WITHOUT // ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or // FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more // details. // // You should have received a copy of the GNU General Public License along with // this program; if not, see . /*! 10.01.2014 Andreas Weber fast and simple image viewer based on FLTK. Currently RGB24 (8bit red, green, blue) and Grayvalues with 8bit are supported. */ #include #include #include #include #include #include //for memcpy using namespace std; #ifndef _CIMAGEWINDOW_H_ #define _CIMAGEWINDOW_H_ //! width and height of border around actual image #define BORDER_PX 1 class img_win : public Fl_Double_Window { private: uchar* pixel; //!< internal memory for image bool RGB; int img_w () { return w () - 2 * BORDER_PX; } int img_h () { return h () - 2 * BORDER_PX; } int pixel_len() { return img_w () * img_h () * ((RGB)? 3: 1); } public: img_win (int x, int y, int w, int h); ~img_win (); void draw (); void copy_img (const unsigned char* p, unsigned int w, unsigned int h, bool rgb); void custom_label (const char *device, unsigned int seq, double fps); }; #endif image-acquisition-0.2.6/src/PaxHeaders/bootstrap0000644000000000000000000000007414664627164016761 xustar0030 atime=1725116039.520927946 30 ctime=1725116039.688927658 image-acquisition-0.2.6/src/bootstrap0000755000175000017500000000030414664627164017646 0ustar00andyandy00000000000000#!/bin/bash ## Octave-Forge: image acquisition package bootstrap script ## Run this to generate the configure script set -e # halt if unhandled error autoconf # generate configure script image-acquisition-0.2.6/src/PaxHeaders/__v4l2_handler__.cc0000644000000000000000000000006214664627164020405 xustar0020 atime=1725116020 30 ctime=1725116039.688927658 image-acquisition-0.2.6/src/__v4l2_handler__.cc0000644000175000017500000005040514664627164021301 0ustar00andyandy00000000000000// Copyright (C) 2014 Andreas Weber // // This program is free software; you can redistribute it and/or modify it under // the terms of the GNU General Public License as published by the Free Software // Foundation; either version 3 of the License, or (at your option) any later // version. // // This program is distributed in the hope that it will be useful, but WITHOUT // ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or // FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more // details. // // You should have received a copy of the GNU General Public License along with // this program; if not, see . #include #include #include #include "cl_v4l2_handler.h" // PKG_ADD: autoload ("__v4l2_handler_open__", which ("__v4l2_handler__.oct")); // PKG_DEL: autoload ("__v4l2_handler_open__", which ("__v4l2_handler__.oct"), "remove"); DEFUN_DLD(__v4l2_handler_open__, args, nargout, "-*- texinfo -*-\n\ @deftypefn {Loadable Function} {@var{h} =} __v4l2_handler_open__ (@var{device})\n\ Creates an instance of v4l2_handler for a v4l2 device and opens it.\n\ @seealso{getsnapshot}\n\ @end deftypefn") { octave_value_list retval; int nargin = args.length (); if (nargin != 1) { print_usage(); return retval; } string device = args(0).string_value (); v4l2_handler *h = new v4l2_handler (); h->open (device.c_str (), false); retval.append (octave_value (h)); return retval; } // PKG_ADD: autoload ("__v4l2_handler_querycap__", which ("__v4l2_handler__.oct")); // PKG_DEL: autoload ("__v4l2_handler_querycap__", which ("__v4l2_handler__.oct"), "remove"); DEFUN_DLD(__v4l2_handler_querycap__, args, nargout, "-*- texinfo -*-\n\ @deftypefn {Loadable Function} {@var{c} = } __v4l2_handler_querycap__ (@var{h})\n\ Query device capabilities, driver name, card type etc. from v4l2_handler @var{h}.\n\ @end deftypefn") { octave_value_list retval; int nargin = args.length (); if (nargin != 1) { print_usage (); return retval; } v4l2_handler* imgh = get_v4l2_handler_from_ov (args(0)); if (imgh) { retval = imgh->querycap (); } return retval; } // INPUTS // PKG_ADD: autoload ("__v4l2_handler_enuminput__", which ("__v4l2_handler__.oct")); // PKG_DEL: autoload ("__v4l2_handler_enuminput__", which ("__v4l2_handler__.oct"), "remove"); DEFUN_DLD(__v4l2_handler_enuminput__, args, nargout, "-*- texinfo -*-\n\ @deftypefn {Loadable Function} {@var{inputs} = } __v4l2_handler_enuminput__ (@var{h})\n\ Enumerate video inputs from v4l2_handler @var{h}.\n\ Returns a struct with information for all available v4l2 inputs.\n\ @end deftypefn") { octave_value_list retval; int nargin = args.length (); if (nargin != 1) { print_usage (); return retval; } v4l2_handler* imgh = get_v4l2_handler_from_ov (args(0)); if (imgh) { retval = imgh->enuminput (); } return retval; } // PKG_ADD: autoload ("__v4l2_handler_g_input__", which ("__v4l2_handler__.oct")); // PKG_DEL: autoload ("__v4l2_handler_g_input__", which ("__v4l2_handler__.oct"), "remove"); DEFUN_DLD(__v4l2_handler_g_input__, args, nargout, "-*- texinfo -*-\n\ @deftypefn {Loadable Function} {@var{N} =} __v4l2_handler_g_input__ (@var{h})\n\ Query the current video input from v4l2_handler @var{h}.\n\ @end deftypefn") { octave_value_list retval; int nargin = args.length (); if (nargin != 1) { print_usage (); return retval; } v4l2_handler* imgh = get_v4l2_handler_from_ov (args(0)); if (imgh) { retval = octave_value(imgh->g_input ()); } return retval; } // PKG_ADD: autoload ("__v4l2_handler_s_input__", which ("__v4l2_handler__.oct")); // PKG_DEL: autoload ("__v4l2_handler_s_input__", which ("__v4l2_handler__.oct"), "remove"); DEFUN_DLD(__v4l2_handler_s_input__, args, nargout, "-*- texinfo -*-\n\ @deftypefn {Loadable Function} {} __v4l2_handler_s_input__ (@var{h}, @var{n})\n\ Select video input @var{n} from v4l2_handler @var{h}.\n\ @end deftypefn") { octave_value_list retval; int nargin = args.length (); if (nargin != 2) { print_usage (); return retval; } v4l2_handler* imgh = get_v4l2_handler_from_ov (args(0)); if (imgh) { if (! args(1).isnumeric()) error("N has to be a integer selecting the desired video input, starting from 0."); else { int num = args(1).int_value (); imgh->s_input (num); } } return retval; } // FORMAT // PKG_ADD: autoload ("__v4l2_handler_enum_fmt__", which ("__v4l2_handler__.oct")); // PKG_DEL: autoload ("__v4l2_handler_enum_fmt__", which ("__v4l2_handler__.oct"), "remove"); DEFUN_DLD(__v4l2_handler_enum_fmt__, args, nargout, "-*- texinfo -*-\n\ @deftypefn {Loadable Function} {@var{formats} = } __v4l2_handler_enum_fmt__ (@var{h})\n\ Enumerate image formats from v4l2_handler @var{h}.\n\ Returns a struct with information for all available v4l2 formats.\n\ @end deftypefn") { octave_value_list retval; int nargin = args.length (); if (nargin != 1) { print_usage (); return retval; } v4l2_handler* imgh = get_v4l2_handler_from_ov (args(0)); if (imgh) { retval = imgh->enum_fmt (); } return retval; } // PKG_ADD: autoload ("__v4l2_handler_enum_framesizes__", which ("__v4l2_handler__.oct")); // PKG_DEL: autoload ("__v4l2_handler_enum_framesizes__", which ("__v4l2_handler__.oct"), "remove"); DEFUN_DLD(__v4l2_handler_enum_framesizes__, args, nargout, "-*- texinfo -*-\n\ @deftypefn {Loadable Function} {@var{sizes} = } __v4l2_handler_enum_framesizes__ (@var{h}, @var{format})\n\ Enumerate available frame sizes from v4l2_handler @var{h}.\n\ @end deftypefn") { octave_value_list retval; int nargin = args.length (); if (nargin != 2) { print_usage (); return retval; } v4l2_handler* imgh = get_v4l2_handler_from_ov (args(0)); if (imgh) { string pixel_format = args(1).string_value (); retval = octave_value(imgh->enum_framesizes (pixel_format)); } return retval; } // PKG_ADD: autoload ("__v4l2_handler_enum_frameintervals__", which ("__v4l2_handler__.oct")); // PKG_DEL: autoload ("__v4l2_handler_enum_frameintervals__", which ("__v4l2_handler__.oct"), "remove"); DEFUN_DLD(__v4l2_handler_enum_frameintervals__, args, nargout, "-*- texinfo -*-\n\ @deftypefn {Loadable Function} {@var{T} = } __v4l2_handler_enum_frameintervals__ (@var{h}, @var{size}, @var{format})\n\ Enumerate available frame intervals from v4l2_handler @var{h}.\n\ Return a Nx2 matrix with numerator, denominator.\n\ @end deftypefn") { octave_value_list retval; int nargin = args.length (); if (nargin != 3) { print_usage (); return retval; } v4l2_handler* imgh = get_v4l2_handler_from_ov (args(0)); if (imgh) { if (!args (1).is_matrix_type()) print_usage(); else { Matrix s = args(1).matrix_value (); unsigned int width = s(0); unsigned int height = s(1); string pixel_format = args(2).string_value (); retval = octave_value(imgh->enum_frameintervals (pixel_format, width, height)); } } return retval; } // PKG_ADD: autoload ("__v4l2_handler_g_parm__", which ("__v4l2_handler__.oct")); // PKG_DEL: autoload ("__v4l2_handler_g_parm__", which ("__v4l2_handler__.oct"), "remove"); DEFUN_DLD(__v4l2_handler_g_parm__, args, nargout, "-*- texinfo -*-\n\ @deftypefn {Loadable Function} {@var{T} = } __v4l2_handler_g_parm__ (@var{h})\n\ Return current frame interval as numerator, denominator.\n\ @end deftypefn") { octave_value_list retval; int nargin = args.length (); if (nargin != 1) { print_usage (); return retval; } v4l2_handler* imgh = get_v4l2_handler_from_ov (args(0)); if (imgh) { retval = octave_value(imgh->g_parm ()); } return retval; } // PKG_ADD: autoload ("__v4l2_handler_s_parm__", which ("__v4l2_handler__.oct")); // PKG_DEL: autoload ("__v4l2_handler_s_parm__", which ("__v4l2_handler__.oct"), "remove"); DEFUN_DLD(__v4l2_handler_s_parm__, args, nargout, "-*- texinfo -*-\n\ @deftypefn {Loadable Function} {@var{T} = } __v4l2_handler_s_parm__ (@var{h}, @var{s})\n\ Set frame interval numerator and denominator.\n\ @end deftypefn") { octave_value_list retval; int nargin = args.length (); if (nargin != 2) { print_usage (); return retval; } v4l2_handler* imgh = get_v4l2_handler_from_ov (args(0)); if (imgh) { imgh->s_parm(args(1).matrix_value ()); } return retval; } // PKG_ADD: autoload ("__v4l2_handler_g_fmt__", which ("__v4l2_handler__.oct")); // PKG_DEL: autoload ("__v4l2_handler_g_fmt__", which ("__v4l2_handler__.oct"), "remove"); DEFUN_DLD(__v4l2_handler_g_fmt__, args, nargout, "-*- texinfo -*-\n\ @deftypefn {Loadable Function} @var{fmt} = __v4l2_handler_g_fmt__ (@var{h})\n\ Get format pixelformat, size[width height].\n\ @end deftypefn") { octave_value_list retval; int nargin = args.length (); if (nargin != 1) { print_usage (); return retval; } v4l2_handler* imgh = get_v4l2_handler_from_ov (args(0)); if (imgh) { retval = octave_value(imgh->g_fmt ()); } return retval; } // PKG_ADD: autoload ("__v4l2_handler_s_fmt__", which ("__v4l2_handler__.oct")); // PKG_DEL: autoload ("__v4l2_handler_s_fmt__", which ("__v4l2_handler__.oct"), "remove"); DEFUN_DLD(__v4l2_handler_s_fmt__, args, nargout, "-*- texinfo -*-\n\ @deftypefn {Loadable Function} __v4l2_handler_s_fmt__ (@var{h}, @var{fmt}, @var{size})\n\ Set format @var{fmt}, @var{size} (V4L2_FIELD_INTERLACED).\n\ @end deftypefn") { octave_value_list retval; int nargin = args.length (); if (nargin != 3) { print_usage (); return retval; } if (!args (1).is_string() || !args (2).is_matrix_type()) { print_usage(); return retval; } v4l2_handler* imgh = get_v4l2_handler_from_ov (args(0)); if (imgh) { string fmt = args(1).string_value (); Matrix s = args(2).matrix_value (); unsigned int xres = s(0); unsigned int yres = s(1); imgh->s_fmt (fmt, xres, yres); } return retval; } // CONTROLS // PKG_ADD: autoload ("__v4l2_handler_queryctrl__", which ("__v4l2_handler__.oct")); // PKG_DEL: autoload ("__v4l2_handler_queryctrl__", which ("__v4l2_handler__.oct"), "remove"); DEFUN_DLD(__v4l2_handler_queryctrl__, args, nargout, "-*- texinfo -*-\n\ @deftypefn {Loadable Function} {@var{controls} = } __v4l2_handler_queryctrl__ (@var{h})\n\ Query controls like brightness, contrast, saturation etc. from v4l2_handler @var{h}.\n\ Use the field id for calls to __v4l2_handler_s_ctrl__.\n\ @seealso{__v4l2_handler_s_ctrl__}\n\ @end deftypefn") { octave_value_list retval; int nargin = args.length (); if (nargin != 1) { print_usage (); return retval; } v4l2_handler* imgh = get_v4l2_handler_from_ov (args(0)); if (imgh) { retval = imgh->queryctrl (); } return retval; } // PKG_ADD: autoload ("__v4l2_handler_g_ctrl__", which ("__v4l2_handler__.oct")); // PKG_DEL: autoload ("__v4l2_handler_g_ctrl__", which ("__v4l2_handler__.oct"), "remove"); DEFUN_DLD(__v4l2_handler_g_ctrl__, args, nargout, "-*- texinfo -*-\n\ @deftypefn {Loadable Function} {@var{value} =} __v4l2_handler_g_ctrl__ (@var{h}, @var{id})\n\ Get value for control @var{id} from v4l2_handler @var{h}.\n\ Use the field id from __v4l2_handler_queryctrl__.\n\ @seealso{__v4l2_handler_queryctrl__}\n\ @end deftypefn") { octave_value_list retval; int nargin = args.length (); if (nargin != 2) { print_usage (); return retval; } if (!args (1).isnumeric()) { error("ID has to be an integer value"); return retval; } v4l2_handler* imgh = get_v4l2_handler_from_ov (args(0)); if (imgh) { unsigned int id = args(1).int_value (); retval = octave_value(imgh->g_ctrl (id)); } return retval; } // PKG_ADD: autoload ("__v4l2_handler_s_ctrl__", which ("__v4l2_handler__.oct")); // PKG_DEL: autoload ("__v4l2_handler_s_ctrl__", which ("__v4l2_handler__.oct"), "remove"); DEFUN_DLD(__v4l2_handler_s_ctrl__, args, nargout, "-*- texinfo -*-\n\ @deftypefn {Loadable Function} {} __v4l2_handler_s_ctrl__ (@var{h}, @var{id}, @var{value})\n\ Set control @var{id} like brightness, contrast, saturation etc. in v4l2_handler @var{h}.\n\ Use the field id from __v4l2_handler_queryctrl__.\n\ @seealso{__v4l2_handler_queryctrl__}\n\ @end deftypefn") { octave_value_list retval; int nargin = args.length (); if (nargin != 3) { print_usage (); return retval; } if (!args (1).isnumeric() || !args (2).isnumeric()) { error("ID and VALUE has to be integer values"); return retval; } v4l2_handler* imgh = get_v4l2_handler_from_ov (args(0)); if (imgh) { unsigned int id = args(1).int_value (); unsigned int value = args(2).int_value (); imgh->s_ctrl (id, value); } return retval; } // STREAMING // PKG_ADD: autoload ("__v4l2_handler_streamoff__", which ("__v4l2_handler__.oct")); // PKG_DEL: autoload ("__v4l2_handler_streamoff__", which ("__v4l2_handler__.oct"), "remove"); DEFUN_DLD(__v4l2_handler_streamoff__, args, nargout, "-*- texinfo -*-\n\ @deftypefn {Loadable Function} __v4l2_handler_streamoff__ (@var{h})\n\ Stop streaming.\n\ @seealso{streamoff}\n\ @end deftypefn") { octave_value_list retval; int nargin = args.length (); if (nargin != 1) { print_usage (); return retval; } v4l2_handler* imgh = get_v4l2_handler_from_ov (args(0)); if (imgh) imgh->streamoff (); return retval; } // PKG_ADD: autoload ("__v4l2_handler_streamon__", which ("__v4l2_handler__.oct")); // PKG_DEL: autoload ("__v4l2_handler_streamon__", which ("__v4l2_handler__.oct"), "remove"); DEFUN_DLD(__v4l2_handler_streamon__, args, nargout, "-*- texinfo -*-\n\ @deftypefn {Loadable Function} __v4l2_handler_streamon__ (@var{h}, @var{n})\n\ Start streaming with @var{n} buffers. It is recommended to use at least 2 buffers.\n\ @seealso{streamoff, getsnapshot}\n\ @end deftypefn") { octave_value_list retval; int nargin = args.length (); if (nargin != 2) { print_usage (); return retval; } if (!args (1).isnumeric()) { return retval; } v4l2_handler* imgh = get_v4l2_handler_from_ov (args(0)); if (imgh) { unsigned int n_buffers = args(1).int_value (); imgh->streamon (n_buffers); } return retval; } // CAPTURES // PKG_ADD: autoload ("__v4l2_handler_capture__", which ("__v4l2_handler__.oct")); // PKG_DEL: autoload ("__v4l2_handler_capture__", which ("__v4l2_handler__.oct"), "remove"); DEFUN_DLD(__v4l2_handler_capture__, args, nargout, "-*- texinfo -*-\n\ @deftypefn {Loadable Function} {@var{f} =} __v4l2_handler_capture__ (@var{h}, [@var{preview}])\n\ Get a snapshot from v4l2_handler @var{h}\n\ @end deftypefn") { octave_value_list retval; int nargin = args.length (); if (nargin < 1 || nargin>2) { print_usage (); return retval; } if (nargin > 1 && !args (1).isnumeric()) { return retval; } v4l2_handler* imgh = get_v4l2_handler_from_ov (args(0)); if (imgh) { int preview = 0; if (nargin==2) preview = args(1).int_value (); retval = imgh->capture (nargout, preview); } return retval; } typedef std::vector dev_vec; static bool is_v4l_dev(const char *name) { return !memcmp(name, "video", 5) || !memcmp(name, "radio", 5) || !memcmp(name, "vbi", 3) || !memcmp(name, "v4l-subdev", 10); } // PKG_ADD: autoload ("__v4l2_list_devices__", which ("__v4l2_handler__.oct")); // PKG_DEL: autoload ("__v4l2_list_devices__", which ("__v4l2_handler__.oct"), "remove"); DEFUN_DLD(__v4l2_list_devices__, args, nargout, "-*- texinfo -*-\n\ @deftypefn {Loadable Function} {@var{l} =} __v4l2_list_devices__ ()\n\ List v4l2 devices in /dev/. It doesn't resolve links.\n\ Use '$ v4l2-ctl --list-devices' for more details.\n\ @end deftypefn") { // Most of this code was taken from v4l2-ctl-common.cpp:list_devices() // which is part of the v4l-utils (http://git.linuxtv.org/v4l-utils.git). // Thanks to Kevin Thayer (Copyright (C) 2003-2004), // Hans Verkuil (Copyright (C) 2004, 2006, 2007) and the linuxtv community. octave_map retval; DIR *dp; struct dirent *ep; dev_vec files; dp = opendir("/dev"); if (dp == NULL) { error ("Couldn't open /dev/ directory"); return octave_value(); } while ((ep = readdir(dp))) if (is_v4l_dev(ep->d_name)) files.push_back(std::string("/dev/") + ep->d_name); closedir(dp); octave_idx_type i=0; for (dev_vec::iterator iter = files.begin(); iter != files.end(); ++iter) { //printf ("trying '%s'...\n", iter->c_str()); //fflush(stdout); v4l2_handler h; octave_scalar_map caps = h.open(iter->c_str(), true); if (! h.is_meta_capture ()) { caps.assign ("device", *iter); retval.assign(i++, caps); } //else //printf ("INFO: list device ignores metadata interface '%s'...\n", iter->c_str()); } return octave_value (retval); } // PKG_ADD: autoload ("__v4l2_preview_window_is_shown__", which ("__v4l2_handler__.oct")); // PKG_DEL: autoload ("__v4l2_preview_window_is_shown__", which ("__v4l2_handler__.oct"), "remove"); DEFUN_DLD(__v4l2_preview_window_is_shown__, args, nargout, "-*- texinfo -*-\n\ @deftypefn {Loadable Function} {@var{l} =} __v4l2_preview_window_is_shown__ (@var{h})\n\ Return preview_window->shown().\n\ @end deftypefn") { octave_value ret; if (args.length () != 1) { print_usage (); return ret; } v4l2_handler* imgh = get_v4l2_handler_from_ov (args(0)); if (imgh) { ret = imgh->preview_window_is_shown (); } return ret; } /* %!demo %! disp("open /dev/video0 and show live images with 2 different formats") %! vi = __v4l2_handler_open__("/dev/video0"); %! s = __v4l2_handler_enum_framesizes__(vi, "RGB24"); # get available frame sizes %! __v4l2_handler_s_fmt__(vi, "RGB24", s(1,:)); # use the default framesize %! __v4l2_handler_streamon__(vi, 2); # enable streaming with 2 buffers %! l = 200; %! for i=1:l %! __v4l2_handler_capture__(vi, 1); # capture 200 frames and show preview %! endfor %! __v4l2_handler_streamoff__(vi); # diable streaming %! __v4l2_handler_s_fmt__(vi, "RGB24", s(2,:)); # use smales available format %! disp("The image size is now") %! disp(__v4l2_handler_g_fmt__(vi)) %! __v4l2_handler_streamon__(vi, 2); # enable streaming with 2 buffers %! for i=1:l %! __v4l2_handler_capture__(vi, 1); %! endfor %! __v4l2_handler_streamoff__(vi); */ /* %!demo %! x = __v4l2_handler_open__(__test__device__()); %! disp("get controls") %! ctrls = __v4l2_handler_queryctrl__(x) %! fieldnames(__v4l2_handler_queryctrl__(x)) */ /* %!test %! x = __v4l2_handler_open__(__test__device__()); %! s = __v4l2_handler_enum_framesizes__(x, "RGB24"); %! default_size = s(1,:); %! __v4l2_handler_s_fmt__(x, "RGB24", default_size); %! t = __v4l2_handler_enum_frameintervals__(x, default_size, "RGB24"); %! #__v4l2_handler_enum_fmt__(x).description %! __v4l2_handler_streamon__(x, 2); %! [img, seq, timestamp] = __v4l2_handler_capture__(x); %! assert(size(img), [default_size(2), default_size(1), 3]); */ /* change controls %!test %! x = __v4l2_handler_open__(__test__device__()); %! s = __v4l2_handler_enum_framesizes__(x, "RGB24"); %! __v4l2_handler_s_fmt__(x, "RGB24", s(end,:)); %! ctrls = __v4l2_handler_queryctrl__(x); %! if (isfield(ctrls, "brightness")) %! min_brightness = ctrls.brightness.min; %! max_brightness = ctrls.brightness.max; %! __v4l2_handler_s_ctrl__(x, ctrls.brightness.id, min_brightness); %! assert(__v4l2_handler_g_ctrl__(x, ctrls.brightness.id), min_brightness) %! __v4l2_handler_s_ctrl__(x, ctrls.brightness.id, max_brightness); %! assert(__v4l2_handler_g_ctrl__(x, ctrls.brightness.id), max_brightness) %! v = round(max_brightness/2); %! __v4l2_handler_s_ctrl__(x, ctrls.brightness.id, v); %! assert(__v4l2_handler_g_ctrl__(x, ctrls.brightness.id), v); %! endif */ /* check get timeperframe (1/fps). * This may fail for example with some sn9c20x cameras %!test %! x = __v4l2_handler_open__(__test__device__()); %! r = __v4l2_handler_g_parm__(x); */ image-acquisition-0.2.6/src/PaxHeaders/config.sub0000644000000000000000000000006214664627164016776 xustar0020 atime=1725116020 30 ctime=1725116039.688927658 image-acquisition-0.2.6/src/config.sub0000644000175000017500000011544114664627164017674 0ustar00andyandy00000000000000#! /bin/sh # Configuration validation subroutine script. # Copyright 1992-2024 Free Software Foundation, Inc. # shellcheck disable=SC2006,SC2268,SC2162 # see below for rationale timestamp='2024-05-27' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by # the Free Software Foundation, either version 3 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, see . # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that # program. This Exception is an additional permission under section 7 # of the GNU General Public License, version 3 ("GPLv3"). # Please send patches to . # # Configuration subroutine to validate and canonicalize a configuration type. # Supply the specified configuration type as an argument. # If it is invalid, we print an error message on stderr and exit with code 1. # Otherwise, we print the canonical config type on stdout and succeed. # You can get the latest version of this script from: # https://git.savannah.gnu.org/cgit/config.git/plain/config.sub # This file is supposed to be the same for all GNU packages # and recognize all the CPU types, system types and aliases # that are meaningful with *any* GNU software. # Each package is responsible for reporting which valid configurations # it does not support. The user should be able to distinguish # a failure to support a valid configuration from a meaningless # configuration. # The goal of this file is to map all the various variations of a given # machine specification into a single specification in the form: # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM # or in some cases, the newer four-part form: # CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM # It is wrong to echo any other type of specification. # The "shellcheck disable" line above the timestamp inhibits complaints # about features and limitations of the classic Bourne shell that were # superseded or lifted in POSIX. However, this script identifies a wide # variety of pre-POSIX systems that do not have POSIX shells at all, and # even some reasonably current systems (Solaris 10 as case-in-point) still # have a pre-POSIX /bin/sh. me=`echo "$0" | sed -e 's,.*/,,'` usage="\ Usage: $0 [OPTION] CPU-MFR-OPSYS or ALIAS Canonicalize a configuration name. Options: -h, --help print this help, then exit -t, --time-stamp print date of last modification, then exit -v, --version print version number, then exit Report bugs and patches to ." version="\ GNU config.sub ($timestamp) Copyright 1992-2024 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." help=" Try '$me --help' for more information." # Parse command line while test $# -gt 0 ; do case $1 in --time-stamp | --time* | -t ) echo "$timestamp" ; exit ;; --version | -v ) echo "$version" ; exit ;; --help | --h* | -h ) echo "$usage"; exit ;; -- ) # Stop option processing shift; break ;; - ) # Use stdin as input. break ;; -* ) echo "$me: invalid option $1$help" >&2 exit 1 ;; *local*) # First pass through any local machine types. echo "$1" exit ;; * ) break ;; esac done case $# in 0) echo "$me: missing argument$help" >&2 exit 1;; 1) ;; *) echo "$me: too many arguments$help" >&2 exit 1;; esac # Split fields of configuration type saved_IFS=$IFS IFS="-" read field1 field2 field3 field4 <&2 exit 1 ;; *-*-*-*) basic_machine=$field1-$field2 basic_os=$field3-$field4 ;; *-*-*) # Ambiguous whether COMPANY is present, or skipped and KERNEL-OS is two # parts maybe_os=$field2-$field3 case $maybe_os in cloudabi*-eabi* \ | kfreebsd*-gnu* \ | knetbsd*-gnu* \ | kopensolaris*-gnu* \ | linux-* \ | managarm-* \ | netbsd*-eabi* \ | netbsd*-gnu* \ | nto-qnx* \ | os2-emx* \ | rtmk-nova* \ | storm-chaos* \ | uclinux-gnu* \ | uclinux-uclibc* \ | windows-* ) basic_machine=$field1 basic_os=$maybe_os ;; android-linux) basic_machine=$field1-unknown basic_os=linux-android ;; *) basic_machine=$field1-$field2 basic_os=$field3 ;; esac ;; *-*) case $field1-$field2 in # Shorthands that happen to contain a single dash convex-c[12] | convex-c3[248]) basic_machine=$field2-convex basic_os= ;; decstation-3100) basic_machine=mips-dec basic_os= ;; *-*) # Second component is usually, but not always the OS case $field2 in # Do not treat sunos as a manufacturer sun*os*) basic_machine=$field1 basic_os=$field2 ;; # Manufacturers 3100* \ | 32* \ | 3300* \ | 3600* \ | 7300* \ | acorn \ | altos* \ | apollo \ | apple \ | atari \ | att* \ | axis \ | be \ | bull \ | cbm \ | ccur \ | cisco \ | commodore \ | convergent* \ | convex* \ | cray \ | crds \ | dec* \ | delta* \ | dg \ | digital \ | dolphin \ | encore* \ | gould \ | harris \ | highlevel \ | hitachi* \ | hp \ | ibm* \ | intergraph \ | isi* \ | knuth \ | masscomp \ | microblaze* \ | mips* \ | motorola* \ | ncr* \ | news \ | next \ | ns \ | oki \ | omron* \ | pc533* \ | rebel \ | rom68k \ | rombug \ | semi \ | sequent* \ | siemens \ | sgi* \ | siemens \ | sim \ | sni \ | sony* \ | stratus \ | sun \ | sun[234]* \ | tektronix \ | tti* \ | ultra \ | unicom* \ | wec \ | winbond \ | wrs) basic_machine=$field1-$field2 basic_os= ;; zephyr*) basic_machine=$field1-unknown basic_os=$field2 ;; *) basic_machine=$field1 basic_os=$field2 ;; esac ;; esac ;; *) # Convert single-component short-hands not valid as part of # multi-component configurations. case $field1 in 386bsd) basic_machine=i386-pc basic_os=bsd ;; a29khif) basic_machine=a29k-amd basic_os=udi ;; adobe68k) basic_machine=m68010-adobe basic_os=scout ;; alliant) basic_machine=fx80-alliant basic_os= ;; altos | altos3068) basic_machine=m68k-altos basic_os= ;; am29k) basic_machine=a29k-none basic_os=bsd ;; amdahl) basic_machine=580-amdahl basic_os=sysv ;; amiga) basic_machine=m68k-unknown basic_os= ;; amigaos | amigados) basic_machine=m68k-unknown basic_os=amigaos ;; amigaunix | amix) basic_machine=m68k-unknown basic_os=sysv4 ;; apollo68) basic_machine=m68k-apollo basic_os=sysv ;; apollo68bsd) basic_machine=m68k-apollo basic_os=bsd ;; aros) basic_machine=i386-pc basic_os=aros ;; aux) basic_machine=m68k-apple basic_os=aux ;; balance) basic_machine=ns32k-sequent basic_os=dynix ;; blackfin) basic_machine=bfin-unknown basic_os=linux ;; cegcc) basic_machine=arm-unknown basic_os=cegcc ;; cray) basic_machine=j90-cray basic_os=unicos ;; crds | unos) basic_machine=m68k-crds basic_os= ;; da30) basic_machine=m68k-da30 basic_os= ;; decstation | pmax | pmin | dec3100 | decstatn) basic_machine=mips-dec basic_os= ;; delta88) basic_machine=m88k-motorola basic_os=sysv3 ;; dicos) basic_machine=i686-pc basic_os=dicos ;; djgpp) basic_machine=i586-pc basic_os=msdosdjgpp ;; ebmon29k) basic_machine=a29k-amd basic_os=ebmon ;; es1800 | OSE68k | ose68k | ose | OSE) basic_machine=m68k-ericsson basic_os=ose ;; gmicro) basic_machine=tron-gmicro basic_os=sysv ;; go32) basic_machine=i386-pc basic_os=go32 ;; h8300hms) basic_machine=h8300-hitachi basic_os=hms ;; h8300xray) basic_machine=h8300-hitachi basic_os=xray ;; h8500hms) basic_machine=h8500-hitachi basic_os=hms ;; harris) basic_machine=m88k-harris basic_os=sysv3 ;; hp300 | hp300hpux) basic_machine=m68k-hp basic_os=hpux ;; hp300bsd) basic_machine=m68k-hp basic_os=bsd ;; hppaosf) basic_machine=hppa1.1-hp basic_os=osf ;; hppro) basic_machine=hppa1.1-hp basic_os=proelf ;; i386mach) basic_machine=i386-mach basic_os=mach ;; isi68 | isi) basic_machine=m68k-isi basic_os=sysv ;; m68knommu) basic_machine=m68k-unknown basic_os=linux ;; magnum | m3230) basic_machine=mips-mips basic_os=sysv ;; merlin) basic_machine=ns32k-utek basic_os=sysv ;; mingw64) basic_machine=x86_64-pc basic_os=mingw64 ;; mingw32) basic_machine=i686-pc basic_os=mingw32 ;; mingw32ce) basic_machine=arm-unknown basic_os=mingw32ce ;; monitor) basic_machine=m68k-rom68k basic_os=coff ;; morphos) basic_machine=powerpc-unknown basic_os=morphos ;; moxiebox) basic_machine=moxie-unknown basic_os=moxiebox ;; msdos) basic_machine=i386-pc basic_os=msdos ;; msys) basic_machine=i686-pc basic_os=msys ;; mvs) basic_machine=i370-ibm basic_os=mvs ;; nacl) basic_machine=le32-unknown basic_os=nacl ;; ncr3000) basic_machine=i486-ncr basic_os=sysv4 ;; netbsd386) basic_machine=i386-pc basic_os=netbsd ;; netwinder) basic_machine=armv4l-rebel basic_os=linux ;; news | news700 | news800 | news900) basic_machine=m68k-sony basic_os=newsos ;; news1000) basic_machine=m68030-sony basic_os=newsos ;; necv70) basic_machine=v70-nec basic_os=sysv ;; nh3000) basic_machine=m68k-harris basic_os=cxux ;; nh[45]000) basic_machine=m88k-harris basic_os=cxux ;; nindy960) basic_machine=i960-intel basic_os=nindy ;; mon960) basic_machine=i960-intel basic_os=mon960 ;; nonstopux) basic_machine=mips-compaq basic_os=nonstopux ;; os400) basic_machine=powerpc-ibm basic_os=os400 ;; OSE68000 | ose68000) basic_machine=m68000-ericsson basic_os=ose ;; os68k) basic_machine=m68k-none basic_os=os68k ;; paragon) basic_machine=i860-intel basic_os=osf ;; parisc) basic_machine=hppa-unknown basic_os=linux ;; psp) basic_machine=mipsallegrexel-sony basic_os=psp ;; pw32) basic_machine=i586-unknown basic_os=pw32 ;; rdos | rdos64) basic_machine=x86_64-pc basic_os=rdos ;; rdos32) basic_machine=i386-pc basic_os=rdos ;; rom68k) basic_machine=m68k-rom68k basic_os=coff ;; sa29200) basic_machine=a29k-amd basic_os=udi ;; sei) basic_machine=mips-sei basic_os=seiux ;; sequent) basic_machine=i386-sequent basic_os= ;; sps7) basic_machine=m68k-bull basic_os=sysv2 ;; st2000) basic_machine=m68k-tandem basic_os= ;; stratus) basic_machine=i860-stratus basic_os=sysv4 ;; sun2) basic_machine=m68000-sun basic_os= ;; sun2os3) basic_machine=m68000-sun basic_os=sunos3 ;; sun2os4) basic_machine=m68000-sun basic_os=sunos4 ;; sun3) basic_machine=m68k-sun basic_os= ;; sun3os3) basic_machine=m68k-sun basic_os=sunos3 ;; sun3os4) basic_machine=m68k-sun basic_os=sunos4 ;; sun4) basic_machine=sparc-sun basic_os= ;; sun4os3) basic_machine=sparc-sun basic_os=sunos3 ;; sun4os4) basic_machine=sparc-sun basic_os=sunos4 ;; sun4sol2) basic_machine=sparc-sun basic_os=solaris2 ;; sun386 | sun386i | roadrunner) basic_machine=i386-sun basic_os= ;; sv1) basic_machine=sv1-cray basic_os=unicos ;; symmetry) basic_machine=i386-sequent basic_os=dynix ;; t3e) basic_machine=alphaev5-cray basic_os=unicos ;; t90) basic_machine=t90-cray basic_os=unicos ;; toad1) basic_machine=pdp10-xkl basic_os=tops20 ;; tpf) basic_machine=s390x-ibm basic_os=tpf ;; udi29k) basic_machine=a29k-amd basic_os=udi ;; ultra3) basic_machine=a29k-nyu basic_os=sym1 ;; v810 | necv810) basic_machine=v810-nec basic_os=none ;; vaxv) basic_machine=vax-dec basic_os=sysv ;; vms) basic_machine=vax-dec basic_os=vms ;; vsta) basic_machine=i386-pc basic_os=vsta ;; vxworks960) basic_machine=i960-wrs basic_os=vxworks ;; vxworks68) basic_machine=m68k-wrs basic_os=vxworks ;; vxworks29k) basic_machine=a29k-wrs basic_os=vxworks ;; xbox) basic_machine=i686-pc basic_os=mingw32 ;; ymp) basic_machine=ymp-cray basic_os=unicos ;; *) basic_machine=$1 basic_os= ;; esac ;; esac # Decode 1-component or ad-hoc basic machines case $basic_machine in # Here we handle the default manufacturer of certain CPU types. It is in # some cases the only manufacturer, in others, it is the most popular. w89k) cpu=hppa1.1 vendor=winbond ;; op50n) cpu=hppa1.1 vendor=oki ;; op60c) cpu=hppa1.1 vendor=oki ;; ibm*) cpu=i370 vendor=ibm ;; orion105) cpu=clipper vendor=highlevel ;; mac | mpw | mac-mpw) cpu=m68k vendor=apple ;; pmac | pmac-mpw) cpu=powerpc vendor=apple ;; # Recognize the various machine names and aliases which stand # for a CPU type and a company and sometimes even an OS. 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) cpu=m68000 vendor=att ;; 3b*) cpu=we32k vendor=att ;; bluegene*) cpu=powerpc vendor=ibm basic_os=cnk ;; decsystem10* | dec10*) cpu=pdp10 vendor=dec basic_os=tops10 ;; decsystem20* | dec20*) cpu=pdp10 vendor=dec basic_os=tops20 ;; delta | 3300 | delta-motorola | 3300-motorola | motorola-delta | motorola-3300) cpu=m68k vendor=motorola ;; # This used to be dpx2*, but that gets the RS6000-based # DPX/20 and the x86-based DPX/2-100 wrong. See # https://oldskool.silicium.org/stations/bull_dpx20.htm # https://www.feb-patrimoine.com/english/bull_dpx2.htm # https://www.feb-patrimoine.com/english/unix_and_bull.htm dpx2 | dpx2[23]00 | dpx2[23]xx) cpu=m68k vendor=bull ;; dpx2100 | dpx21xx) cpu=i386 vendor=bull ;; dpx20) cpu=rs6000 vendor=bull ;; encore | umax | mmax) cpu=ns32k vendor=encore ;; elxsi) cpu=elxsi vendor=elxsi basic_os=${basic_os:-bsd} ;; fx2800) cpu=i860 vendor=alliant ;; genix) cpu=ns32k vendor=ns ;; h3050r* | hiux*) cpu=hppa1.1 vendor=hitachi basic_os=hiuxwe2 ;; hp3k9[0-9][0-9] | hp9[0-9][0-9]) cpu=hppa1.0 vendor=hp ;; hp9k2[0-9][0-9] | hp9k31[0-9]) cpu=m68000 vendor=hp ;; hp9k3[2-9][0-9]) cpu=m68k vendor=hp ;; hp9k6[0-9][0-9] | hp6[0-9][0-9]) cpu=hppa1.0 vendor=hp ;; hp9k7[0-79][0-9] | hp7[0-79][0-9]) cpu=hppa1.1 vendor=hp ;; hp9k78[0-9] | hp78[0-9]) # FIXME: really hppa2.0-hp cpu=hppa1.1 vendor=hp ;; hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) # FIXME: really hppa2.0-hp cpu=hppa1.1 vendor=hp ;; hp9k8[0-9][13679] | hp8[0-9][13679]) cpu=hppa1.1 vendor=hp ;; hp9k8[0-9][0-9] | hp8[0-9][0-9]) cpu=hppa1.0 vendor=hp ;; i*86v32) cpu=`echo "$1" | sed -e 's/86.*/86/'` vendor=pc basic_os=sysv32 ;; i*86v4*) cpu=`echo "$1" | sed -e 's/86.*/86/'` vendor=pc basic_os=sysv4 ;; i*86v) cpu=`echo "$1" | sed -e 's/86.*/86/'` vendor=pc basic_os=sysv ;; i*86sol2) cpu=`echo "$1" | sed -e 's/86.*/86/'` vendor=pc basic_os=solaris2 ;; j90 | j90-cray) cpu=j90 vendor=cray basic_os=${basic_os:-unicos} ;; iris | iris4d) cpu=mips vendor=sgi case $basic_os in irix*) ;; *) basic_os=irix4 ;; esac ;; miniframe) cpu=m68000 vendor=convergent ;; *mint | mint[0-9]* | *MiNT | *MiNT[0-9]*) cpu=m68k vendor=atari basic_os=mint ;; news-3600 | risc-news) cpu=mips vendor=sony basic_os=newsos ;; next | m*-next) cpu=m68k vendor=next ;; np1) cpu=np1 vendor=gould ;; op50n-* | op60c-*) cpu=hppa1.1 vendor=oki basic_os=proelf ;; pa-hitachi) cpu=hppa1.1 vendor=hitachi basic_os=hiuxwe2 ;; pbd) cpu=sparc vendor=tti ;; pbb) cpu=m68k vendor=tti ;; pc532) cpu=ns32k vendor=pc532 ;; pn) cpu=pn vendor=gould ;; power) cpu=power vendor=ibm ;; ps2) cpu=i386 vendor=ibm ;; rm[46]00) cpu=mips vendor=siemens ;; rtpc | rtpc-*) cpu=romp vendor=ibm ;; sde) cpu=mipsisa32 vendor=sde basic_os=${basic_os:-elf} ;; simso-wrs) cpu=sparclite vendor=wrs basic_os=vxworks ;; tower | tower-32) cpu=m68k vendor=ncr ;; vpp*|vx|vx-*) cpu=f301 vendor=fujitsu ;; w65) cpu=w65 vendor=wdc ;; w89k-*) cpu=hppa1.1 vendor=winbond basic_os=proelf ;; none) cpu=none vendor=none ;; leon|leon[3-9]) cpu=sparc vendor=$basic_machine ;; leon-*|leon[3-9]-*) cpu=sparc vendor=`echo "$basic_machine" | sed 's/-.*//'` ;; *-*) saved_IFS=$IFS IFS="-" read cpu vendor <&2 exit 1 ;; esac ;; esac # Here we canonicalize certain aliases for manufacturers. case $vendor in digital*) vendor=dec ;; commodore*) vendor=cbm ;; *) ;; esac # Decode manufacturer-specific aliases for certain operating systems. if test x"$basic_os" != x then # First recognize some ad-hoc cases, or perhaps split kernel-os, or else just # set os. obj= case $basic_os in gnu/linux*) kernel=linux os=`echo "$basic_os" | sed -e 's|gnu/linux|gnu|'` ;; os2-emx) kernel=os2 os=`echo "$basic_os" | sed -e 's|os2-emx|emx|'` ;; nto-qnx*) kernel=nto os=`echo "$basic_os" | sed -e 's|nto-qnx|qnx|'` ;; *-*) saved_IFS=$IFS IFS="-" read kernel os <&2 fi ;; *) echo "Invalid configuration '$1': OS '$os' not recognized" 1>&2 exit 1 ;; esac case $obj in aout* | coff* | elf* | pe*) ;; '') # empty is fine ;; *) echo "Invalid configuration '$1': Machine code format '$obj' not recognized" 1>&2 exit 1 ;; esac # Here we handle the constraint that a (synthetic) cpu and os are # valid only in combination with each other and nowhere else. case $cpu-$os in # The "javascript-unknown-ghcjs" triple is used by GHC; we # accept it here in order to tolerate that, but reject any # variations. javascript-ghcjs) ;; javascript-* | *-ghcjs) echo "Invalid configuration '$1': cpu '$cpu' is not valid with os '$os$obj'" 1>&2 exit 1 ;; esac # As a final step for OS-related things, validate the OS-kernel combination # (given a valid OS), if there is a kernel. case $kernel-$os-$obj in linux-gnu*- | linux-android*- | linux-dietlibc*- | linux-llvm*- \ | linux-mlibc*- | linux-musl*- | linux-newlib*- \ | linux-relibc*- | linux-uclibc*- | linux-ohos*- ) ;; uclinux-uclibc*- | uclinux-gnu*- ) ;; managarm-mlibc*- | managarm-kernel*- ) ;; windows*-msvc*-) ;; -dietlibc*- | -llvm*- | -mlibc*- | -musl*- | -newlib*- | -relibc*- \ | -uclibc*- ) # These are just libc implementations, not actual OSes, and thus # require a kernel. echo "Invalid configuration '$1': libc '$os' needs explicit kernel." 1>&2 exit 1 ;; -kernel*- ) echo "Invalid configuration '$1': '$os' needs explicit kernel." 1>&2 exit 1 ;; *-kernel*- ) echo "Invalid configuration '$1': '$kernel' does not support '$os'." 1>&2 exit 1 ;; *-msvc*- ) echo "Invalid configuration '$1': '$os' needs 'windows'." 1>&2 exit 1 ;; kfreebsd*-gnu*- | knetbsd*-gnu*- | netbsd*-gnu*- | kopensolaris*-gnu*-) ;; vxworks-simlinux- | vxworks-simwindows- | vxworks-spe-) ;; nto-qnx*-) ;; os2-emx-) ;; rtmk-nova-) ;; *-eabi*- | *-gnueabi*-) ;; none--*) # None (no kernel, i.e. freestanding / bare metal), # can be paired with an machine code file format ;; -*-) # Blank kernel with real OS is always fine. ;; --*) # Blank kernel and OS with real machine code file format is always fine. ;; *-*-*) echo "Invalid configuration '$1': Kernel '$kernel' not known to work with OS '$os'." 1>&2 exit 1 ;; esac # Here we handle the case where we know the os, and the CPU type, but not the # manufacturer. We pick the logical manufacturer. case $vendor in unknown) case $cpu-$os in *-riscix*) vendor=acorn ;; *-sunos* | *-solaris*) vendor=sun ;; *-cnk* | *-aix*) vendor=ibm ;; *-beos*) vendor=be ;; *-hpux*) vendor=hp ;; *-mpeix*) vendor=hp ;; *-hiux*) vendor=hitachi ;; *-unos*) vendor=crds ;; *-dgux*) vendor=dg ;; *-luna*) vendor=omron ;; *-genix*) vendor=ns ;; *-clix*) vendor=intergraph ;; *-mvs* | *-opened*) vendor=ibm ;; *-os400*) vendor=ibm ;; s390-* | s390x-*) vendor=ibm ;; *-ptx*) vendor=sequent ;; *-tpf*) vendor=ibm ;; *-vxsim* | *-vxworks* | *-windiss*) vendor=wrs ;; *-aux*) vendor=apple ;; *-hms*) vendor=hitachi ;; *-mpw* | *-macos*) vendor=apple ;; *-*mint | *-mint[0-9]* | *-*MiNT | *-MiNT[0-9]*) vendor=atari ;; *-vos*) vendor=stratus ;; esac ;; esac echo "$cpu-$vendor${kernel:+-$kernel}${os:+-$os}${obj:+-$obj}" exit # Local variables: # eval: (add-hook 'before-save-hook 'time-stamp) # time-stamp-start: "timestamp='" # time-stamp-format: "%:y-%02m-%02d" # time-stamp-end: "'" # End: image-acquisition-0.2.6/src/PaxHeaders/cl_v4l2_handler.h0000644000000000000000000000006214664627164020131 xustar0020 atime=1725116020 30 ctime=1725116039.688927658 image-acquisition-0.2.6/src/cl_v4l2_handler.h0000644000175000017500000001141314664627164021021 0ustar00andyandy00000000000000// Copyright (C) 2014 Andreas Weber // // This program is free software; you can redistribute it and/or modify it under // the terms of the GNU General Public License as published by the Free Software // Foundation; either version 3 of the License, or (at your option) any later // version. // // This program is distributed in the hope that it will be useful, but WITHOUT // ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or // FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more // details. // // You should have received a copy of the GNU General Public License along with // this program; if not, see . #ifndef _V4L2_HANDLER_ #define _V4L2_HANDLER_ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "cl_img_win.h" using namespace std; #define CLEAR(x) memset(&(x), 0, sizeof(x)) #define xioctl(n, r, p) xioctl_name(n, r, p, #r, __FILE__, __LINE__) //! buffers for mmap struct buffer { void *start; //!< start of buffer size_t length; //!< length in bytes, e.g. 3*640*480 (nColors*width*height) }; /*! * v4l2 wrapper for octave-image-acquisition * * A big help was the Video Grabber example using libv4l by Mauro Carvalho Cheha * http://www.linuxtv.org/downloads/v4l-dvb-apis/v4l2grab-example.html */ class v4l2_handler: public octave_base_value { public: v4l2_handler (); octave_base_value *clone (void) const // TODO: check if this is okay { octave_stdout << "v4l2_handler clone" << endl; return new v4l2_handler (*this); } octave_base_value *empty_clone (void) const // TODO: check if this is okay { octave_stdout << "v4l2_handler empty_clone" << endl; return new v4l2_handler (); } ~v4l2_handler (void); octave_scalar_map open (string d, bool quiet); //!< open a v4l2 device e.g. /dev/video0 void print (std::ostream& os, bool pr_as_read_syntax) const; //!< print itself on ostream octave_value querycap (); //!< Query device capabilities octave_value enuminput (); //!< Enumerate video inputs int g_input (); //!< Query the current video input void s_input (int index); //!< Select video input octave_value enum_fmt (enum v4l2_buf_type type = V4L2_BUF_TYPE_VIDEO_CAPTURE); //!< Enumerate image formats Matrix enum_framesizes (string pixelformat); //!< Enumerate frame sizes octave_scalar_map g_fmt (); //!< Get current format void s_fmt (string fmtstr, __u32 xres, __u32 yres); //!< Set format Matrix enum_frameintervals (string pixelformat, __u32 width, __u32 height); //!< Enumerate frame intervals Matrix g_parm (); //!< Get streaming parameters (like frame interval) void s_parm (Matrix timeperframe); //!< Set streaming parameters (like frame interval) octave_value queryctrl (); //!< Query controls int g_ctrl (int id); //!< Get control void s_ctrl (int id, int value); //!< Set control octave_value_list capture (int nargout, int preview=0); //!< Retrieve captured image from buffer void capture_to_ppm (const char *fn); //!< Retrieve captured image from buffer and save it as ppm void streamon (unsigned int n); //!< start streaming with n buffers void streamoff (); //!< stop streaming void close (); //!< close v4l2 device bool preview_window_is_shown() { Fl::wait(0); return (preview_window)? preview_window->shown() : false; } bool is_video_capture () {return _is_video_capture;} bool is_meta_capture () {return _is_meta_capture;} private: v4l2_handler (const v4l2_handler& m); static bool type_loaded; int fd; string dev; unsigned int n_buffer; struct buffer *buffers; bool streaming; img_win *preview_window; bool _is_video_capture; bool _is_meta_capture; // Properties bool is_constant (void) const { return true; } bool is_defined (void) const { return true; } void xioctl_name (int fh, unsigned long int request, void *arg, const char* name, const char* file, const int line); octave_scalar_map get_osm (struct v4l2_queryctrl queryctrl); void reqbufs (unsigned int n); //!< Initiate Memory Mapping or User Pointer I/O void mmap (); void qbuf (); void munmap (); octave_scalar_map expand_cap (unsigned int cap); DECLARE_OV_TYPEID_FUNCTIONS_AND_DATA }; v4l2_handler* get_v4l2_handler_from_ov (octave_value ov); #endif image-acquisition-0.2.6/src/PaxHeaders/configure0000644000000000000000000000013214664627207016716 xustar0030 mtime=1725116039.680927672 30 atime=1725116039.656927712 30 ctime=1725116039.688927658 image-acquisition-0.2.6/src/configure0000755000175000017500000042454314664627207017627 0ustar00andyandy00000000000000#! /bin/sh # Guess values for system-dependent variables and create Makefiles. # Generated by GNU Autoconf 2.71 for Octave-Forge image-acquisition package 0.1.0. # # Report bugs to . # # # Copyright (C) 1992-1996, 1998-2017, 2020-2021 Free Software Foundation, # Inc. # # # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. ## -------------------- ## ## M4sh Initialization. ## ## -------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh as_nop=: if test ${ZSH_VERSION+y} && (emulate sh) >/dev/null 2>&1 then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else $as_nop case `(set -o) 2>/dev/null` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi # Reset variables that may have inherited troublesome values from # the environment. # IFS needs to be set, to space, tab, and newline, in precisely that order. # (If _AS_PATH_WALK were called with IFS unset, it would have the # side effect of setting IFS to empty, thus disabling word splitting.) # Quoting is to prevent editors from complaining about space-tab. as_nl=' ' export as_nl IFS=" "" $as_nl" PS1='$ ' PS2='> ' PS4='+ ' # Ensure predictable behavior from utilities with locale-dependent output. LC_ALL=C export LC_ALL LANGUAGE=C export LANGUAGE # We cannot yet rely on "unset" to work, but we need these variables # to be unset--not just set to an empty or harmless value--now, to # avoid bugs in old shells (e.g. pre-3.0 UWIN ksh). This construct # also avoids known problems related to "unset" and subshell syntax # in other old shells (e.g. bash 2.01 and pdksh 5.2.14). for as_var in BASH_ENV ENV MAIL MAILPATH CDPATH do eval test \${$as_var+y} \ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : done # Ensure that fds 0, 1, and 2 are open. if (exec 3>&0) 2>/dev/null; then :; else exec 0&1) 2>/dev/null; then :; else exec 1>/dev/null; fi if (exec 3>&2) ; then :; else exec 2>/dev/null; fi # The user is always right. if ${PATH_SEPARATOR+false} :; then PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || PATH_SEPARATOR=';' } fi # Find who we are. Look in the path if we contain no directory separator. as_myself= case $0 in #(( *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS case $as_dir in #((( '') as_dir=./ ;; */) ;; *) as_dir=$as_dir/ ;; esac test -r "$as_dir$0" && as_myself=$as_dir$0 && break done IFS=$as_save_IFS ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then printf "%s\n" "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 exit 1 fi # Use a proper internal environment variable to ensure we don't fall # into an infinite loop, continuously re-executing ourselves. if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then _as_can_reexec=no; export _as_can_reexec; # We cannot yet assume a decent shell, so we have to provide a # neutralization value for shells without unset; and this also # works around shells that cannot unset nonexistent variables. # Preserve -v and -x to the replacement shell. BASH_ENV=/dev/null ENV=/dev/null (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV case $- in # (((( *v*x* | *x*v* ) as_opts=-vx ;; *v* ) as_opts=-v ;; *x* ) as_opts=-x ;; * ) as_opts= ;; esac exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} # Admittedly, this is quite paranoid, since all the known shells bail # out after a failed `exec'. printf "%s\n" "$0: could not re-execute with $CONFIG_SHELL" >&2 exit 255 fi # We don't want this to propagate to other subprocesses. { _as_can_reexec=; unset _as_can_reexec;} if test "x$CONFIG_SHELL" = x; then as_bourne_compatible="as_nop=: if test \${ZSH_VERSION+y} && (emulate sh) >/dev/null 2>&1 then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which # is contrary to our usage. Disable this feature. alias -g '\${1+\"\$@\"}'='\"\$@\"' setopt NO_GLOB_SUBST else \$as_nop case \`(set -o) 2>/dev/null\` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi " as_required="as_fn_return () { (exit \$1); } as_fn_success () { as_fn_return 0; } as_fn_failure () { as_fn_return 1; } as_fn_ret_success () { return 0; } as_fn_ret_failure () { return 1; } exitcode=0 as_fn_success || { exitcode=1; echo as_fn_success failed.; } as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } if ( set x; as_fn_ret_success y && test x = \"\$1\" ) then : else \$as_nop exitcode=1; echo positional parameters were not saved. fi test x\$exitcode = x0 || exit 1 blah=\$(echo \$(echo blah)) test x\"\$blah\" = xblah || exit 1 test -x / || exit 1" as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1" if (eval "$as_required") 2>/dev/null then : as_have_required=yes else $as_nop as_have_required=no fi if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null then : else $as_nop as_save_IFS=$IFS; IFS=$PATH_SEPARATOR as_found=false for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do IFS=$as_save_IFS case $as_dir in #((( '') as_dir=./ ;; */) ;; *) as_dir=$as_dir/ ;; esac as_found=: case $as_dir in #( /*) for as_base in sh bash ksh sh5; do # Try only shells that exist, to save several forks. as_shell=$as_dir$as_base if { test -f "$as_shell" || test -f "$as_shell.exe"; } && as_run=a "$as_shell" -c "$as_bourne_compatible""$as_required" 2>/dev/null then : CONFIG_SHELL=$as_shell as_have_required=yes if as_run=a "$as_shell" -c "$as_bourne_compatible""$as_suggested" 2>/dev/null then : break 2 fi fi done;; esac as_found=false done IFS=$as_save_IFS if $as_found then : else $as_nop if { test -f "$SHELL" || test -f "$SHELL.exe"; } && as_run=a "$SHELL" -c "$as_bourne_compatible""$as_required" 2>/dev/null then : CONFIG_SHELL=$SHELL as_have_required=yes fi fi if test "x$CONFIG_SHELL" != x then : export CONFIG_SHELL # We cannot yet assume a decent shell, so we have to provide a # neutralization value for shells without unset; and this also # works around shells that cannot unset nonexistent variables. # Preserve -v and -x to the replacement shell. BASH_ENV=/dev/null ENV=/dev/null (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV case $- in # (((( *v*x* | *x*v* ) as_opts=-vx ;; *v* ) as_opts=-v ;; *x* ) as_opts=-x ;; * ) as_opts= ;; esac exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} # Admittedly, this is quite paranoid, since all the known shells bail # out after a failed `exec'. printf "%s\n" "$0: could not re-execute with $CONFIG_SHELL" >&2 exit 255 fi if test x$as_have_required = xno then : printf "%s\n" "$0: This script requires a shell more modern than all" printf "%s\n" "$0: the shells that I found on your system." if test ${ZSH_VERSION+y} ; then printf "%s\n" "$0: In particular, zsh $ZSH_VERSION has bugs and should" printf "%s\n" "$0: be upgraded to zsh 4.3.4 or later." else printf "%s\n" "$0: Please tell bug-autoconf@gnu.org and $0: andy.weber.aw@gmail.com about your system, including $0: any error possibly output before this message. Then $0: install a modern shell, or manually run the script $0: under such a shell if you do have one." fi exit 1 fi fi fi SHELL=${CONFIG_SHELL-/bin/sh} export SHELL # Unset more variables known to interfere with behavior of common tools. CLICOLOR_FORCE= GREP_OPTIONS= unset CLICOLOR_FORCE GREP_OPTIONS ## --------------------- ## ## M4sh Shell Functions. ## ## --------------------- ## # as_fn_unset VAR # --------------- # Portably unset VAR. as_fn_unset () { { eval $1=; unset $1;} } as_unset=as_fn_unset # as_fn_set_status STATUS # ----------------------- # Set $? to STATUS, without forking. as_fn_set_status () { return $1 } # as_fn_set_status # as_fn_exit STATUS # ----------------- # Exit the shell with STATUS, even in a "trap 0" or "set -e" context. as_fn_exit () { set +e as_fn_set_status $1 exit $1 } # as_fn_exit # as_fn_nop # --------- # Do nothing but, unlike ":", preserve the value of $?. as_fn_nop () { return $? } as_nop=as_fn_nop # as_fn_mkdir_p # ------------- # Create "$as_dir" as a directory, including parents if necessary. as_fn_mkdir_p () { case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || eval $as_mkdir_p || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`printf "%s\n" "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || printf "%s\n" X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" } # as_fn_mkdir_p # as_fn_executable_p FILE # ----------------------- # Test if FILE is an executable regular file. as_fn_executable_p () { test -f "$1" && test -x "$1" } # as_fn_executable_p # as_fn_append VAR VALUE # ---------------------- # Append the text in VALUE to the end of the definition contained in VAR. Take # advantage of any shell optimizations that allow amortized linear growth over # repeated appends, instead of the typical quadratic growth present in naive # implementations. if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null then : eval 'as_fn_append () { eval $1+=\$2 }' else $as_nop as_fn_append () { eval $1=\$$1\$2 } fi # as_fn_append # as_fn_arith ARG... # ------------------ # Perform arithmetic evaluation on the ARGs, and store the result in the # global $as_val. Take advantage of shells that can avoid forks. The arguments # must be portable across $(()) and expr. if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null then : eval 'as_fn_arith () { as_val=$(( $* )) }' else $as_nop as_fn_arith () { as_val=`expr "$@" || test $? -eq 1` } fi # as_fn_arith # as_fn_nop # --------- # Do nothing but, unlike ":", preserve the value of $?. as_fn_nop () { return $? } as_nop=as_fn_nop # as_fn_error STATUS ERROR [LINENO LOG_FD] # ---------------------------------------- # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are # provided, also output the error to LOG_FD, referencing LINENO. Then exit the # script with STATUS, using 1 if that was 0. as_fn_error () { as_status=$1; test $as_status -eq 0 && as_status=1 if test "$4"; then as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 fi printf "%s\n" "$as_me: error: $2" >&2 as_fn_exit $as_status } # as_fn_error if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then as_dirname=dirname else as_dirname=false fi as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || printf "%s\n" X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits as_lineno_1=$LINENO as_lineno_1a=$LINENO as_lineno_2=$LINENO as_lineno_2a=$LINENO eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) sed -n ' p /[$]LINENO/= ' <$as_myself | sed ' s/[$]LINENO.*/&-/ t lineno b :lineno N :loop s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ t loop s/-\n.*// ' >$as_me.lineno && chmod +x "$as_me.lineno" || { printf "%s\n" "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } # If we had to re-execute with $CONFIG_SHELL, we're ensured to have # already done that, so ensure we don't try to do so again and fall # in an infinite loop. This has already happened in practice. _as_can_reexec=no; export _as_can_reexec # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the # original and so on. Autoconf is especially sensitive to this). . "./$as_me.lineno" # Exit status is that of the last command. exit } # Determine whether it's possible to make 'echo' print without a newline. # These variables are no longer used directly by Autoconf, but are AC_SUBSTed # for compatibility with existing Makefiles. ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in #((((( -n*) case `echo 'xy\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. xy) ECHO_C='\c';; *) echo `echo ksh88 bug on AIX 6.1` > /dev/null ECHO_T=' ';; esac;; *) ECHO_N='-n';; esac # For backward compatibility with old third-party macros, we provide # the shell variables $as_echo and $as_echo_n. New code should use # AS_ECHO(["message"]) and AS_ECHO_N(["message"]), respectively. as_echo='printf %s\n' as_echo_n='printf %s' rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir mkdir conf$$.dir 2>/dev/null fi if (echo >conf$$.file) 2>/dev/null; then if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. # In both cases, we have to default to `cp -pR'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -pR' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -pR' fi else as_ln_s='cp -pR' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null if mkdir -p . 2>/dev/null; then as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false fi as_test_x='test -x' as_executable_p=as_fn_executable_p # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" test -n "$DJDIR" || exec 7<&0 &1 # Name of the host. # hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, # so uname gets run too. ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` # # Initializations. # ac_default_prefix=/usr/local ac_clean_files= ac_config_libobj_dir=. LIBOBJS= cross_compiling=no subdirs= MFLAGS= MAKEFLAGS= # Identity of this package. PACKAGE_NAME='Octave-Forge image-acquisition package' PACKAGE_TARNAME='octave-forge-image-acquisition-package' PACKAGE_VERSION='0.1.0' PACKAGE_STRING='Octave-Forge image-acquisition package 0.1.0' PACKAGE_BUGREPORT='andy.weber.aw@gmail.com' PACKAGE_URL='' # Factoring default headers for most tests. ac_includes_default="\ #include #ifdef HAVE_STDIO_H # include #endif #ifdef HAVE_STDLIB_H # include #endif #ifdef HAVE_STRING_H # include #endif #ifdef HAVE_INTTYPES_H # include #endif #ifdef HAVE_STDINT_H # include #endif #ifdef HAVE_STRINGS_H # include #endif #ifdef HAVE_SYS_TYPES_H # include #endif #ifdef HAVE_SYS_STAT_H # include #endif #ifdef HAVE_UNISTD_H # include #endif" ac_header_cxx_list= ac_func_cxx_list= ac_subst_vars='LTLIBOBJS host_os host_vendor host_cpu host build_os build_vendor build_cpu build LIBOBJS FLTK_CONFIG HAVE_MKOCTFILE OBJEXT EXEEXT ac_ct_CXX CPPFLAGS LDFLAGS CXXFLAGS CXX target_alias host_alias build_alias LIBS ECHO_T ECHO_N ECHO_C DEFS mandir localedir libdir psdir pdfdir dvidir htmldir infodir docdir oldincludedir includedir runstatedir localstatedir sharedstatedir sysconfdir datadir datarootdir libexecdir sbindir bindir program_transform_name prefix exec_prefix PACKAGE_URL PACKAGE_BUGREPORT PACKAGE_STRING PACKAGE_VERSION PACKAGE_TARNAME PACKAGE_NAME PATH_SEPARATOR SHELL' ac_subst_files='' ac_user_opts=' enable_option_checking ' ac_precious_vars='build_alias host_alias target_alias CXX CXXFLAGS LDFLAGS LIBS CPPFLAGS CCC' # Initialize some variables set by options. ac_init_help= ac_init_version=false ac_unrecognized_opts= ac_unrecognized_sep= # The variables have the same names as the options, with # dashes changed to underlines. cache_file=/dev/null exec_prefix=NONE no_create= no_recursion= prefix=NONE program_prefix=NONE program_suffix=NONE program_transform_name=s,x,x, silent= site= srcdir= verbose= x_includes=NONE x_libraries=NONE # Installation directory options. # These are left unexpanded so users can "make install exec_prefix=/foo" # and all the variables that are supposed to be based on exec_prefix # by default will actually change. # Use braces instead of parens because sh, perl, etc. also accept them. # (The list follows the same order as the GNU Coding Standards.) bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' datarootdir='${prefix}/share' datadir='${datarootdir}' sysconfdir='${prefix}/etc' sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' runstatedir='${localstatedir}/run' includedir='${prefix}/include' oldincludedir='/usr/include' docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' infodir='${datarootdir}/info' htmldir='${docdir}' dvidir='${docdir}' pdfdir='${docdir}' psdir='${docdir}' libdir='${exec_prefix}/lib' localedir='${datarootdir}/locale' mandir='${datarootdir}/man' ac_prev= ac_dashdash= for ac_option do # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then eval $ac_prev=\$ac_option ac_prev= continue fi case $ac_option in *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; *=) ac_optarg= ;; *) ac_optarg=yes ;; esac case $ac_dashdash$ac_option in --) ac_dashdash=yes ;; -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) bindir=$ac_optarg ;; -build | --build | --buil | --bui | --bu) ac_prev=build_alias ;; -build=* | --build=* | --buil=* | --bui=* | --bu=*) build_alias=$ac_optarg ;; -cache-file | --cache-file | --cache-fil | --cache-fi \ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ac_prev=cache_file ;; -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) cache_file=$ac_optarg ;; --config-cache | -C) cache_file=config.cache ;; -datadir | --datadir | --datadi | --datad) ac_prev=datadir ;; -datadir=* | --datadir=* | --datadi=* | --datad=*) datadir=$ac_optarg ;; -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ | --dataroo | --dataro | --datar) ac_prev=datarootdir ;; -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) datarootdir=$ac_optarg ;; -disable-* | --disable-*) ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid feature name: \`$ac_useropt'" ac_useropt_orig=$ac_useropt ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "enable_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval enable_$ac_useropt=no ;; -docdir | --docdir | --docdi | --doc | --do) ac_prev=docdir ;; -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) docdir=$ac_optarg ;; -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) ac_prev=dvidir ;; -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) dvidir=$ac_optarg ;; -enable-* | --enable-*) ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid feature name: \`$ac_useropt'" ac_useropt_orig=$ac_useropt ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "enable_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval enable_$ac_useropt=\$ac_optarg ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ | --exec | --exe | --ex) ac_prev=exec_prefix ;; -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ | --exec=* | --exe=* | --ex=*) exec_prefix=$ac_optarg ;; -gas | --gas | --ga | --g) # Obsolete; use --with-gas. with_gas=yes ;; -help | --help | --hel | --he | -h) ac_init_help=long ;; -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) ac_init_help=recursive ;; -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) ac_init_help=short ;; -host | --host | --hos | --ho) ac_prev=host_alias ;; -host=* | --host=* | --hos=* | --ho=*) host_alias=$ac_optarg ;; -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) ac_prev=htmldir ;; -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ | --ht=*) htmldir=$ac_optarg ;; -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ | --includ=* | --inclu=* | --incl=* | --inc=*) includedir=$ac_optarg ;; -infodir | --infodir | --infodi | --infod | --info | --inf) ac_prev=infodir ;; -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) infodir=$ac_optarg ;; -libdir | --libdir | --libdi | --libd) ac_prev=libdir ;; -libdir=* | --libdir=* | --libdi=* | --libd=*) libdir=$ac_optarg ;; -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ | --libexe | --libex | --libe) ac_prev=libexecdir ;; -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ | --libexe=* | --libex=* | --libe=*) libexecdir=$ac_optarg ;; -localedir | --localedir | --localedi | --localed | --locale) ac_prev=localedir ;; -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) localedir=$ac_optarg ;; -localstatedir | --localstatedir | --localstatedi | --localstated \ | --localstate | --localstat | --localsta | --localst | --locals) ac_prev=localstatedir ;; -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) localstatedir=$ac_optarg ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ac_prev=mandir ;; -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) mandir=$ac_optarg ;; -nfp | --nfp | --nf) # Obsolete; use --without-fp. with_fp=no ;; -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c | -n) no_create=yes ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) no_recursion=yes ;; -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ | --oldin | --oldi | --old | --ol | --o) ac_prev=oldincludedir ;; -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) oldincludedir=$ac_optarg ;; -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ac_prev=prefix ;; -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) prefix=$ac_optarg ;; -program-prefix | --program-prefix | --program-prefi | --program-pref \ | --program-pre | --program-pr | --program-p) ac_prev=program_prefix ;; -program-prefix=* | --program-prefix=* | --program-prefi=* \ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) program_prefix=$ac_optarg ;; -program-suffix | --program-suffix | --program-suffi | --program-suff \ | --program-suf | --program-su | --program-s) ac_prev=program_suffix ;; -program-suffix=* | --program-suffix=* | --program-suffi=* \ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) program_suffix=$ac_optarg ;; -program-transform-name | --program-transform-name \ | --program-transform-nam | --program-transform-na \ | --program-transform-n | --program-transform- \ | --program-transform | --program-transfor \ | --program-transfo | --program-transf \ | --program-trans | --program-tran \ | --progr-tra | --program-tr | --program-t) ac_prev=program_transform_name ;; -program-transform-name=* | --program-transform-name=* \ | --program-transform-nam=* | --program-transform-na=* \ | --program-transform-n=* | --program-transform-=* \ | --program-transform=* | --program-transfor=* \ | --program-transfo=* | --program-transf=* \ | --program-trans=* | --program-tran=* \ | --progr-tra=* | --program-tr=* | --program-t=*) program_transform_name=$ac_optarg ;; -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) ac_prev=pdfdir ;; -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) pdfdir=$ac_optarg ;; -psdir | --psdir | --psdi | --psd | --ps) ac_prev=psdir ;; -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) psdir=$ac_optarg ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) silent=yes ;; -runstatedir | --runstatedir | --runstatedi | --runstated \ | --runstate | --runstat | --runsta | --runst | --runs \ | --run | --ru | --r) ac_prev=runstatedir ;; -runstatedir=* | --runstatedir=* | --runstatedi=* | --runstated=* \ | --runstate=* | --runstat=* | --runsta=* | --runst=* | --runs=* \ | --run=* | --ru=* | --r=*) runstatedir=$ac_optarg ;; -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ac_prev=sbindir ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ | --sbi=* | --sb=*) sbindir=$ac_optarg ;; -sharedstatedir | --sharedstatedir | --sharedstatedi \ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ | --sharedst | --shareds | --shared | --share | --shar \ | --sha | --sh) ac_prev=sharedstatedir ;; -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ | --sha=* | --sh=*) sharedstatedir=$ac_optarg ;; -site | --site | --sit) ac_prev=site ;; -site=* | --site=* | --sit=*) site=$ac_optarg ;; -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) srcdir=$ac_optarg ;; -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ | --syscon | --sysco | --sysc | --sys | --sy) ac_prev=sysconfdir ;; -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) sysconfdir=$ac_optarg ;; -target | --target | --targe | --targ | --tar | --ta | --t) ac_prev=target_alias ;; -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) target_alias=$ac_optarg ;; -v | -verbose | --verbose | --verbos | --verbo | --verb) verbose=yes ;; -version | --version | --versio | --versi | --vers | -V) ac_init_version=: ;; -with-* | --with-*) ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid package name: \`$ac_useropt'" ac_useropt_orig=$ac_useropt ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "with_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval with_$ac_useropt=\$ac_optarg ;; -without-* | --without-*) ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid package name: \`$ac_useropt'" ac_useropt_orig=$ac_useropt ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "with_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval with_$ac_useropt=no ;; --x) # Obsolete; use --with-x. with_x=yes ;; -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ | --x-incl | --x-inc | --x-in | --x-i) ac_prev=x_includes ;; -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) x_includes=$ac_optarg ;; -x-libraries | --x-libraries | --x-librarie | --x-librari \ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ac_prev=x_libraries ;; -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries=$ac_optarg ;; -*) as_fn_error $? "unrecognized option: \`$ac_option' Try \`$0 --help' for more information" ;; *=*) ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` # Reject names that are not valid shell variable names. case $ac_envvar in #( '' | [0-9]* | *[!_$as_cr_alnum]* ) as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; esac eval $ac_envvar=\$ac_optarg export $ac_envvar ;; *) # FIXME: should be removed in autoconf 3.0. printf "%s\n" "$as_me: WARNING: you should use --build, --host, --target" >&2 expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && printf "%s\n" "$as_me: WARNING: invalid host type: $ac_option" >&2 : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" ;; esac done if test -n "$ac_prev"; then ac_option=--`echo $ac_prev | sed 's/_/-/g'` as_fn_error $? "missing argument to $ac_option" fi if test -n "$ac_unrecognized_opts"; then case $enable_option_checking in no) ;; fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; *) printf "%s\n" "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; esac fi # Check all directory arguments for consistency. for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ datadir sysconfdir sharedstatedir localstatedir includedir \ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ libdir localedir mandir runstatedir do eval ac_val=\$$ac_var # Remove trailing slashes. case $ac_val in */ ) ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` eval $ac_var=\$ac_val;; esac # Be sure to have absolute directory names. case $ac_val in [\\/$]* | ?:[\\/]* ) continue;; NONE | '' ) case $ac_var in *prefix ) continue;; esac;; esac as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" done # There might be people who depend on the old broken behavior: `$host' # used to hold the argument of --host etc. # FIXME: To remove some day. build=$build_alias host=$host_alias target=$target_alias # FIXME: To remove some day. if test "x$host_alias" != x; then if test "x$build_alias" = x; then cross_compiling=maybe elif test "x$build_alias" != "x$host_alias"; then cross_compiling=yes fi fi ac_tool_prefix= test -n "$host_alias" && ac_tool_prefix=$host_alias- test "$silent" = yes && exec 6>/dev/null ac_pwd=`pwd` && test -n "$ac_pwd" && ac_ls_di=`ls -di .` && ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || as_fn_error $? "working directory cannot be determined" test "X$ac_ls_di" = "X$ac_pwd_ls_di" || as_fn_error $? "pwd does not report name of working directory" # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes # Try the directory containing this script, then the parent directory. ac_confdir=`$as_dirname -- "$as_myself" || $as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_myself" : 'X\(//\)[^/]' \| \ X"$as_myself" : 'X\(//\)$' \| \ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || printf "%s\n" X"$as_myself" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` srcdir=$ac_confdir if test ! -r "$srcdir/$ac_unique_file"; then srcdir=.. fi else ac_srcdir_defaulted=no fi if test ! -r "$srcdir/$ac_unique_file"; then test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" fi ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" ac_abs_confdir=`( cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" pwd)` # When building in place, set srcdir=. if test "$ac_abs_confdir" = "$ac_pwd"; then srcdir=. fi # Remove unnecessary trailing slashes from srcdir. # Double slashes in file names in object file debugging info # mess up M-x gdb in Emacs. case $srcdir in */) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; esac for ac_var in $ac_precious_vars; do eval ac_env_${ac_var}_set=\${${ac_var}+set} eval ac_env_${ac_var}_value=\$${ac_var} eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} eval ac_cv_env_${ac_var}_value=\$${ac_var} done # # Report the --help message. # if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF \`configure' configures Octave-Forge image-acquisition package 0.1.0 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... To assign environment variables (e.g., CC, CFLAGS...), specify them as VAR=VALUE. See below for descriptions of some of the useful variables. Defaults for the options are specified in brackets. Configuration: -h, --help display this help and exit --help=short display options specific to this package --help=recursive display the short help of all the included packages -V, --version display version information and exit -q, --quiet, --silent do not print \`checking ...' messages --cache-file=FILE cache test results in FILE [disabled] -C, --config-cache alias for \`--cache-file=config.cache' -n, --no-create do not create output files --srcdir=DIR find the sources in DIR [configure dir or \`..'] Installation directories: --prefix=PREFIX install architecture-independent files in PREFIX [$ac_default_prefix] --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX [PREFIX] By default, \`make install' will install all the files in \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify an installation prefix other than \`$ac_default_prefix' using \`--prefix', for instance \`--prefix=\$HOME'. For better control, use the options below. Fine tuning of the installation directories: --bindir=DIR user executables [EPREFIX/bin] --sbindir=DIR system admin executables [EPREFIX/sbin] --libexecdir=DIR program executables [EPREFIX/libexec] --sysconfdir=DIR read-only single-machine data [PREFIX/etc] --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] --localstatedir=DIR modifiable single-machine data [PREFIX/var] --runstatedir=DIR modifiable per-process data [LOCALSTATEDIR/run] --libdir=DIR object code libraries [EPREFIX/lib] --includedir=DIR C header files [PREFIX/include] --oldincludedir=DIR C header files for non-gcc [/usr/include] --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] --datadir=DIR read-only architecture-independent data [DATAROOTDIR] --infodir=DIR info documentation [DATAROOTDIR/info] --localedir=DIR locale-dependent data [DATAROOTDIR/locale] --mandir=DIR man documentation [DATAROOTDIR/man] --docdir=DIR documentation root [DATAROOTDIR/doc/octave-forge-image-acquisition-package] --htmldir=DIR html documentation [DOCDIR] --dvidir=DIR dvi documentation [DOCDIR] --pdfdir=DIR pdf documentation [DOCDIR] --psdir=DIR ps documentation [DOCDIR] _ACEOF cat <<\_ACEOF System types: --build=BUILD configure for building on BUILD [guessed] --host=HOST cross-compile to build programs to run on HOST [BUILD] _ACEOF fi if test -n "$ac_init_help"; then case $ac_init_help in short | recursive ) echo "Configuration of Octave-Forge image-acquisition package 0.1.0:";; esac cat <<\_ACEOF Some influential environment variables: CXX C++ compiler command CXXFLAGS C++ compiler flags LDFLAGS linker flags, e.g. -L if you have libraries in a nonstandard directory LIBS libraries to pass to the linker, e.g. -l CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if you have headers in a nonstandard directory Use these variables to override the choices made by `configure' or to help it to find libraries and programs with nonstandard names/locations. Report bugs to . _ACEOF ac_status=$? fi if test "$ac_init_help" = "recursive"; then # If there are subdirs, report their specific --help. for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue test -d "$ac_dir" || { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || continue ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`printf "%s\n" "$ac_dir" | sed 's|^\.[\\/]||'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`printf "%s\n" "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix cd "$ac_dir" || { ac_status=$?; continue; } # Check for configure.gnu first; this name is used for a wrapper for # Metaconfig's "Configure" on case-insensitive file systems. if test -f "$ac_srcdir/configure.gnu"; then echo && $SHELL "$ac_srcdir/configure.gnu" --help=recursive elif test -f "$ac_srcdir/configure"; then echo && $SHELL "$ac_srcdir/configure" --help=recursive else printf "%s\n" "$as_me: WARNING: no configuration information is in $ac_dir" >&2 fi || ac_status=$? cd "$ac_pwd" || { ac_status=$?; break; } done fi test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF Octave-Forge image-acquisition package configure 0.1.0 generated by GNU Autoconf 2.71 Copyright (C) 2021 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. _ACEOF exit fi ## ------------------------ ## ## Autoconf initialization. ## ## ------------------------ ## # ac_fn_cxx_try_compile LINENO # ---------------------------- # Try to compile conftest.$ac_ext, and return whether this succeeded. ac_fn_cxx_try_compile () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack rm -f conftest.$ac_objext conftest.beam if { { ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" printf "%s\n" "$ac_try_echo"; } >&5 (eval "$ac_compile") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext then : ac_retval=0 else $as_nop printf "%s\n" "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_cxx_try_compile # ac_fn_cxx_try_link LINENO # ------------------------- # Try to link conftest.$ac_ext, and return whether this succeeded. ac_fn_cxx_try_link () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack rm -f conftest.$ac_objext conftest.beam conftest$ac_exeext if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" printf "%s\n" "$ac_try_echo"; } >&5 (eval "$ac_link") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || test -x conftest$ac_exeext } then : ac_retval=0 else $as_nop printf "%s\n" "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would # interfere with the next link command; also delete a directory that is # left behind by Apple's compiler. We do this before executing the actions. rm -rf conftest.dSYM conftest_ipa8_conftest.oo eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_cxx_try_link # ac_fn_cxx_check_header_compile LINENO HEADER VAR INCLUDES # --------------------------------------------------------- # Tests whether HEADER exists and can be compiled using the include files in # INCLUDES, setting the cache variable VAR accordingly. ac_fn_cxx_check_header_compile () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 printf %s "checking for $2... " >&6; } if eval test \${$3+y} then : printf %s "(cached) " >&6 else $as_nop cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 #include <$2> _ACEOF if ac_fn_cxx_try_compile "$LINENO" then : eval "$3=yes" else $as_nop eval "$3=no" fi rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext fi eval ac_res=\$$3 { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 printf "%s\n" "$ac_res" >&6; } eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno } # ac_fn_cxx_check_header_compile # ac_fn_cxx_check_func LINENO FUNC VAR # ------------------------------------ # Tests whether FUNC exists, setting the cache variable VAR accordingly ac_fn_cxx_check_func () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 printf %s "checking for $2... " >&6; } if eval test \${$3+y} then : printf %s "(cached) " >&6 else $as_nop cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Define $2 to an innocuous variant, in case declares $2. For example, HP-UX 11i declares gettimeofday. */ #define $2 innocuous_$2 /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $2 (); below. */ #include #undef $2 /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char $2 (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined __stub_$2 || defined __stub___$2 choke me #endif int main (void) { return $2 (); ; return 0; } _ACEOF if ac_fn_cxx_try_link "$LINENO" then : eval "$3=yes" else $as_nop eval "$3=no" fi rm -f core conftest.err conftest.$ac_objext conftest.beam \ conftest$ac_exeext conftest.$ac_ext fi eval ac_res=\$$3 { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 printf "%s\n" "$ac_res" >&6; } eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno } # ac_fn_cxx_check_func # ac_fn_cxx_try_run LINENO # ------------------------ # Try to run conftest.$ac_ext, and return whether this succeeded. Assumes that # executables *can* be run. ac_fn_cxx_try_run () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" printf "%s\n" "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' { { case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" printf "%s\n" "$ac_try_echo"; } >&5 (eval "$ac_try") 2>&5 ac_status=$? printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; } then : ac_retval=0 else $as_nop printf "%s\n" "$as_me: program exited with status $ac_status" >&5 printf "%s\n" "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=$ac_status fi rm -rf conftest.dSYM conftest_ipa8_conftest.oo eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_cxx_try_run ac_configure_args_raw= for ac_arg do case $ac_arg in *\'*) ac_arg=`printf "%s\n" "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac as_fn_append ac_configure_args_raw " '$ac_arg'" done case $ac_configure_args_raw in *$as_nl*) ac_safe_unquote= ;; *) ac_unsafe_z='|&;<>()$`\\"*?[ '' ' # This string ends in space, tab. ac_unsafe_a="$ac_unsafe_z#~" ac_safe_unquote="s/ '\\([^$ac_unsafe_a][^$ac_unsafe_z]*\\)'/ \\1/g" ac_configure_args_raw=` printf "%s\n" "$ac_configure_args_raw" | sed "$ac_safe_unquote"`;; esac cat >config.log <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by Octave-Forge image-acquisition package $as_me 0.1.0, which was generated by GNU Autoconf 2.71. Invocation command line was $ $0$ac_configure_args_raw _ACEOF exec 5>>config.log { cat <<_ASUNAME ## --------- ## ## Platform. ## ## --------- ## hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` uname -m = `(uname -m) 2>/dev/null || echo unknown` uname -r = `(uname -r) 2>/dev/null || echo unknown` uname -s = `(uname -s) 2>/dev/null || echo unknown` uname -v = `(uname -v) 2>/dev/null || echo unknown` /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` /bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` /usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` _ASUNAME as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS case $as_dir in #((( '') as_dir=./ ;; */) ;; *) as_dir=$as_dir/ ;; esac printf "%s\n" "PATH: $as_dir" done IFS=$as_save_IFS } >&5 cat >&5 <<_ACEOF ## ----------- ## ## Core tests. ## ## ----------- ## _ACEOF # Keep a trace of the command line. # Strip out --no-create and --no-recursion so they do not pile up. # Strip out --silent because we don't want to record it for future runs. # Also quote any args containing shell meta-characters. # Make two passes to allow for proper duplicate-argument suppression. ac_configure_args= ac_configure_args0= ac_configure_args1= ac_must_keep_next=false for ac_pass in 1 2 do for ac_arg do case $ac_arg in -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) continue ;; *\'*) ac_arg=`printf "%s\n" "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac case $ac_pass in 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; 2) as_fn_append ac_configure_args1 " '$ac_arg'" if test $ac_must_keep_next = true; then ac_must_keep_next=false # Got value, back to normal. else case $ac_arg in *=* | --config-cache | -C | -disable-* | --disable-* \ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ | -with-* | --with-* | -without-* | --without-* | --x) case "$ac_configure_args0 " in "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; esac ;; -* ) ac_must_keep_next=true ;; esac fi as_fn_append ac_configure_args " '$ac_arg'" ;; esac done done { ac_configure_args0=; unset ac_configure_args0;} { ac_configure_args1=; unset ac_configure_args1;} # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there # would cause problems or look ugly. # WARNING: Use '\'' to represent an apostrophe within the trap. # WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. trap 'exit_status=$? # Sanitize IFS. IFS=" "" $as_nl" # Save into config.log some information that might help in debugging. { echo printf "%s\n" "## ---------------- ## ## Cache variables. ## ## ---------------- ##" echo # The following way of writing the cache mishandles newlines in values, ( for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( *_cv_*) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 printf "%s\n" "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( *) { eval $ac_var=; unset $ac_var;} ;; esac ;; esac done (set) 2>&1 | case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( *${as_nl}ac_space=\ *) sed -n \ "s/'\''/'\''\\\\'\'''\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" ;; #( *) sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; esac | sort ) echo printf "%s\n" "## ----------------- ## ## Output variables. ## ## ----------------- ##" echo for ac_var in $ac_subst_vars do eval ac_val=\$$ac_var case $ac_val in *\'\''*) ac_val=`printf "%s\n" "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac printf "%s\n" "$ac_var='\''$ac_val'\''" done | sort echo if test -n "$ac_subst_files"; then printf "%s\n" "## ------------------- ## ## File substitutions. ## ## ------------------- ##" echo for ac_var in $ac_subst_files do eval ac_val=\$$ac_var case $ac_val in *\'\''*) ac_val=`printf "%s\n" "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac printf "%s\n" "$ac_var='\''$ac_val'\''" done | sort echo fi if test -s confdefs.h; then printf "%s\n" "## ----------- ## ## confdefs.h. ## ## ----------- ##" echo cat confdefs.h echo fi test "$ac_signal" != 0 && printf "%s\n" "$as_me: caught signal $ac_signal" printf "%s\n" "$as_me: exit $exit_status" } >&5 rm -f core *.core core.conftest.* && rm -f -r conftest* confdefs* conf$$* $ac_clean_files && exit $exit_status ' 0 for ac_signal in 1 2 13 15; do trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal done ac_signal=0 # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -f -r conftest* confdefs.h printf "%s\n" "/* confdefs.h */" > confdefs.h # Predefined preprocessor variables. printf "%s\n" "#define PACKAGE_NAME \"$PACKAGE_NAME\"" >>confdefs.h printf "%s\n" "#define PACKAGE_TARNAME \"$PACKAGE_TARNAME\"" >>confdefs.h printf "%s\n" "#define PACKAGE_VERSION \"$PACKAGE_VERSION\"" >>confdefs.h printf "%s\n" "#define PACKAGE_STRING \"$PACKAGE_STRING\"" >>confdefs.h printf "%s\n" "#define PACKAGE_BUGREPORT \"$PACKAGE_BUGREPORT\"" >>confdefs.h printf "%s\n" "#define PACKAGE_URL \"$PACKAGE_URL\"" >>confdefs.h # Let the site file select an alternate cache file if it wants to. # Prefer an explicitly selected file to automatically selected ones. if test -n "$CONFIG_SITE"; then ac_site_files="$CONFIG_SITE" elif test "x$prefix" != xNONE; then ac_site_files="$prefix/share/config.site $prefix/etc/config.site" else ac_site_files="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" fi for ac_site_file in $ac_site_files do case $ac_site_file in #( */*) : ;; #( *) : ac_site_file=./$ac_site_file ;; esac if test -f "$ac_site_file" && test -r "$ac_site_file"; then { printf "%s\n" "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 printf "%s\n" "$as_me: loading site script $ac_site_file" >&6;} sed 's/^/| /' "$ac_site_file" >&5 . "$ac_site_file" \ || { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "failed to load site script $ac_site_file See \`config.log' for more details" "$LINENO" 5; } fi done if test -r "$cache_file"; then # Some versions of bash will fail to source /dev/null (special files # actually), so we avoid doing that. DJGPP emulates it as a regular file. if test /dev/null != "$cache_file" && test -f "$cache_file"; then { printf "%s\n" "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 printf "%s\n" "$as_me: loading cache $cache_file" >&6;} case $cache_file in [\\/]* | ?:[\\/]* ) . "$cache_file";; *) . "./$cache_file";; esac fi else { printf "%s\n" "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 printf "%s\n" "$as_me: creating cache $cache_file" >&6;} >$cache_file fi # Test code for whether the C++ compiler supports C++98 (global declarations) ac_cxx_conftest_cxx98_globals=' // Does the compiler advertise C++98 conformance? #if !defined __cplusplus || __cplusplus < 199711L # error "Compiler does not advertise C++98 conformance" #endif // These inclusions are to reject old compilers that // lack the unsuffixed header files. #include #include // and are *not* freestanding headers in C++98. extern void assert (int); namespace std { extern int strcmp (const char *, const char *); } // Namespaces, exceptions, and templates were all added after "C++ 2.0". using std::exception; using std::strcmp; namespace { void test_exception_syntax() { try { throw "test"; } catch (const char *s) { // Extra parentheses suppress a warning when building autoconf itself, // due to lint rules shared with more typical C programs. assert (!(strcmp) (s, "test")); } } template struct test_template { T const val; explicit test_template(T t) : val(t) {} template T add(U u) { return static_cast(u) + val; } }; } // anonymous namespace ' # Test code for whether the C++ compiler supports C++98 (body of main) ac_cxx_conftest_cxx98_main=' assert (argc); assert (! argv[0]); { test_exception_syntax (); test_template tt (2.0); assert (tt.add (4) == 6.0); assert (true && !false); } ' # Test code for whether the C++ compiler supports C++11 (global declarations) ac_cxx_conftest_cxx11_globals=' // Does the compiler advertise C++ 2011 conformance? #if !defined __cplusplus || __cplusplus < 201103L # error "Compiler does not advertise C++11 conformance" #endif namespace cxx11test { constexpr int get_val() { return 20; } struct testinit { int i; double d; }; class delegate { public: delegate(int n) : n(n) {} delegate(): delegate(2354) {} virtual int getval() { return this->n; }; protected: int n; }; class overridden : public delegate { public: overridden(int n): delegate(n) {} virtual int getval() override final { return this->n * 2; } }; class nocopy { public: nocopy(int i): i(i) {} nocopy() = default; nocopy(const nocopy&) = delete; nocopy & operator=(const nocopy&) = delete; private: int i; }; // for testing lambda expressions template Ret eval(Fn f, Ret v) { return f(v); } // for testing variadic templates and trailing return types template auto sum(V first) -> V { return first; } template auto sum(V first, Args... rest) -> V { return first + sum(rest...); } } ' # Test code for whether the C++ compiler supports C++11 (body of main) ac_cxx_conftest_cxx11_main=' { // Test auto and decltype auto a1 = 6538; auto a2 = 48573953.4; auto a3 = "String literal"; int total = 0; for (auto i = a3; *i; ++i) { total += *i; } decltype(a2) a4 = 34895.034; } { // Test constexpr short sa[cxx11test::get_val()] = { 0 }; } { // Test initializer lists cxx11test::testinit il = { 4323, 435234.23544 }; } { // Test range-based for int array[] = {9, 7, 13, 15, 4, 18, 12, 10, 5, 3, 14, 19, 17, 8, 6, 20, 16, 2, 11, 1}; for (auto &x : array) { x += 23; } } { // Test lambda expressions using cxx11test::eval; assert (eval ([](int x) { return x*2; }, 21) == 42); double d = 2.0; assert (eval ([&](double x) { return d += x; }, 3.0) == 5.0); assert (d == 5.0); assert (eval ([=](double x) mutable { return d += x; }, 4.0) == 9.0); assert (d == 5.0); } { // Test use of variadic templates using cxx11test::sum; auto a = sum(1); auto b = sum(1, 2); auto c = sum(1.0, 2.0, 3.0); } { // Test constructor delegation cxx11test::delegate d1; cxx11test::delegate d2(); cxx11test::delegate d3(45); } { // Test override and final cxx11test::overridden o1(55464); } { // Test nullptr char *c = nullptr; } { // Test template brackets test_template<::test_template> v(test_template(12)); } { // Unicode literals char const *utf8 = u8"UTF-8 string \u2500"; char16_t const *utf16 = u"UTF-8 string \u2500"; char32_t const *utf32 = U"UTF-32 string \u2500"; } ' # Test code for whether the C compiler supports C++11 (complete). ac_cxx_conftest_cxx11_program="${ac_cxx_conftest_cxx98_globals} ${ac_cxx_conftest_cxx11_globals} int main (int argc, char **argv) { int ok = 0; ${ac_cxx_conftest_cxx98_main} ${ac_cxx_conftest_cxx11_main} return ok; } " # Test code for whether the C compiler supports C++98 (complete). ac_cxx_conftest_cxx98_program="${ac_cxx_conftest_cxx98_globals} int main (int argc, char **argv) { int ok = 0; ${ac_cxx_conftest_cxx98_main} return ok; } " as_fn_append ac_header_cxx_list " stdio.h stdio_h HAVE_STDIO_H" as_fn_append ac_header_cxx_list " stdlib.h stdlib_h HAVE_STDLIB_H" as_fn_append ac_header_cxx_list " string.h string_h HAVE_STRING_H" as_fn_append ac_header_cxx_list " inttypes.h inttypes_h HAVE_INTTYPES_H" as_fn_append ac_header_cxx_list " stdint.h stdint_h HAVE_STDINT_H" as_fn_append ac_header_cxx_list " strings.h strings_h HAVE_STRINGS_H" as_fn_append ac_header_cxx_list " sys/stat.h sys_stat_h HAVE_SYS_STAT_H" as_fn_append ac_header_cxx_list " sys/types.h sys_types_h HAVE_SYS_TYPES_H" as_fn_append ac_header_cxx_list " unistd.h unistd_h HAVE_UNISTD_H" as_fn_append ac_header_cxx_list " sys/param.h sys_param_h HAVE_SYS_PARAM_H" as_fn_append ac_func_cxx_list " getpagesize HAVE_GETPAGESIZE" # Auxiliary files required by this configure script. ac_aux_files="config.guess config.sub" # Locations in which to look for auxiliary files. ac_aux_dir_candidates="${srcdir}${PATH_SEPARATOR}${srcdir}/..${PATH_SEPARATOR}${srcdir}/../.." # Search for a directory containing all of the required auxiliary files, # $ac_aux_files, from the $PATH-style list $ac_aux_dir_candidates. # If we don't find one directory that contains all the files we need, # we report the set of missing files from the *first* directory in # $ac_aux_dir_candidates and give up. ac_missing_aux_files="" ac_first_candidate=: printf "%s\n" "$as_me:${as_lineno-$LINENO}: looking for aux files: $ac_aux_files" >&5 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR as_found=false for as_dir in $ac_aux_dir_candidates do IFS=$as_save_IFS case $as_dir in #((( '') as_dir=./ ;; */) ;; *) as_dir=$as_dir/ ;; esac as_found=: printf "%s\n" "$as_me:${as_lineno-$LINENO}: trying $as_dir" >&5 ac_aux_dir_found=yes ac_install_sh= for ac_aux in $ac_aux_files do # As a special case, if "install-sh" is required, that requirement # can be satisfied by any of "install-sh", "install.sh", or "shtool", # and $ac_install_sh is set appropriately for whichever one is found. if test x"$ac_aux" = x"install-sh" then if test -f "${as_dir}install-sh"; then printf "%s\n" "$as_me:${as_lineno-$LINENO}: ${as_dir}install-sh found" >&5 ac_install_sh="${as_dir}install-sh -c" elif test -f "${as_dir}install.sh"; then printf "%s\n" "$as_me:${as_lineno-$LINENO}: ${as_dir}install.sh found" >&5 ac_install_sh="${as_dir}install.sh -c" elif test -f "${as_dir}shtool"; then printf "%s\n" "$as_me:${as_lineno-$LINENO}: ${as_dir}shtool found" >&5 ac_install_sh="${as_dir}shtool install -c" else ac_aux_dir_found=no if $ac_first_candidate; then ac_missing_aux_files="${ac_missing_aux_files} install-sh" else break fi fi else if test -f "${as_dir}${ac_aux}"; then printf "%s\n" "$as_me:${as_lineno-$LINENO}: ${as_dir}${ac_aux} found" >&5 else ac_aux_dir_found=no if $ac_first_candidate; then ac_missing_aux_files="${ac_missing_aux_files} ${ac_aux}" else break fi fi fi done if test "$ac_aux_dir_found" = yes; then ac_aux_dir="$as_dir" break fi ac_first_candidate=false as_found=false done IFS=$as_save_IFS if $as_found then : else $as_nop as_fn_error $? "cannot find required auxiliary files:$ac_missing_aux_files" "$LINENO" 5 fi # These three variables are undocumented and unsupported, # and are intended to be withdrawn in a future Autoconf release. # They can cause serious problems if a builder's source tree is in a directory # whose full name contains unusual characters. if test -f "${ac_aux_dir}config.guess"; then ac_config_guess="$SHELL ${ac_aux_dir}config.guess" fi if test -f "${ac_aux_dir}config.sub"; then ac_config_sub="$SHELL ${ac_aux_dir}config.sub" fi if test -f "$ac_aux_dir/configure"; then ac_configure="$SHELL ${ac_aux_dir}configure" fi # Check that the precious variables saved in the cache have kept the same # value. ac_cache_corrupted=false for ac_var in $ac_precious_vars; do eval ac_old_set=\$ac_cv_env_${ac_var}_set eval ac_new_set=\$ac_env_${ac_var}_set eval ac_old_val=\$ac_cv_env_${ac_var}_value eval ac_new_val=\$ac_env_${ac_var}_value case $ac_old_set,$ac_new_set in set,) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 printf "%s\n" "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ac_cache_corrupted=: ;; ,set) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 printf "%s\n" "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ac_cache_corrupted=: ;; ,);; *) if test "x$ac_old_val" != "x$ac_new_val"; then # differences in whitespace do not lead to failure. ac_old_val_w=`echo x $ac_old_val` ac_new_val_w=`echo x $ac_new_val` if test "$ac_old_val_w" != "$ac_new_val_w"; then { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 printf "%s\n" "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} ac_cache_corrupted=: else { printf "%s\n" "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 printf "%s\n" "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} eval $ac_var=\$ac_old_val fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 printf "%s\n" "$as_me: former value: \`$ac_old_val'" >&2;} { printf "%s\n" "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 printf "%s\n" "$as_me: current value: \`$ac_new_val'" >&2;} fi;; esac # Pass precious variables to config.status. if test "$ac_new_set" = set; then case $ac_new_val in *\'*) ac_arg=$ac_var=`printf "%s\n" "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; *) ac_arg=$ac_var=$ac_new_val ;; esac case " $ac_configure_args " in *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. *) as_fn_append ac_configure_args " '$ac_arg'" ;; esac fi done if $ac_cache_corrupted; then { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;} { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 printf "%s\n" "$as_me: error: changes in the environment can compromise the build" >&2;} as_fn_error $? "run \`${MAKE-make} distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 fi ## -------------------- ## ## Main body of script. ## ## -------------------- ## ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu # Checks for programs. ac_ext=cpp ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu if test -z "$CXX"; then if test -n "$CCC"; then CXX=$CCC else if test -n "$ac_tool_prefix"; then for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC clang++ do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 printf %s "checking for $ac_word... " >&6; } if test ${ac_cv_prog_CXX+y} then : printf %s "(cached) " >&6 else $as_nop if test -n "$CXX"; then ac_cv_prog_CXX="$CXX" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS case $as_dir in #((( '') as_dir=./ ;; */) ;; *) as_dir=$as_dir/ ;; esac for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then ac_cv_prog_CXX="$ac_tool_prefix$ac_prog" printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CXX=$ac_cv_prog_CXX if test -n "$CXX"; then { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $CXX" >&5 printf "%s\n" "$CXX" >&6; } else { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5 printf "%s\n" "no" >&6; } fi test -n "$CXX" && break done fi if test -z "$CXX"; then ac_ct_CXX=$CXX for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC clang++ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 printf %s "checking for $ac_word... " >&6; } if test ${ac_cv_prog_ac_ct_CXX+y} then : printf %s "(cached) " >&6 else $as_nop if test -n "$ac_ct_CXX"; then ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS case $as_dir in #((( '') as_dir=./ ;; */) ;; *) as_dir=$as_dir/ ;; esac for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CXX="$ac_prog" printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CXX=$ac_cv_prog_ac_ct_CXX if test -n "$ac_ct_CXX"; then { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CXX" >&5 printf "%s\n" "$ac_ct_CXX" >&6; } else { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5 printf "%s\n" "no" >&6; } fi test -n "$ac_ct_CXX" && break done if test "x$ac_ct_CXX" = x; then CXX="g++" else case $cross_compiling:$ac_tool_warned in yes:) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 printf "%s\n" "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CXX=$ac_ct_CXX fi fi fi fi # Provide some information about the compiler. printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for C++ compiler version" >&5 set X $ac_compile ac_compiler=$2 for ac_option in --version -v -V -qversion; do { { ac_try="$ac_compiler $ac_option >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" printf "%s\n" "$ac_try_echo"; } >&5 (eval "$ac_compiler $ac_option >&5") 2>conftest.err ac_status=$? if test -s conftest.err; then sed '10a\ ... rest of stderr output deleted ... 10q' conftest.err >conftest.er1 cat conftest.er1 >&5 fi rm -f conftest.er1 conftest.err printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } done cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main (void) { ; return 0; } _ACEOF ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" # Try to create an executable without -o first, disregard a.out. # It will help us diagnose broken compilers, and finding out an intuition # of exeext. { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether the C++ compiler works" >&5 printf %s "checking whether the C++ compiler works... " >&6; } ac_link_default=`printf "%s\n" "$ac_link" | sed 's/ -o *conftest[^ ]*//'` # The possible output files: ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" ac_rmfiles= for ac_file in $ac_files do case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; * ) ac_rmfiles="$ac_rmfiles $ac_file";; esac done rm -f $ac_rmfiles if { { ac_try="$ac_link_default" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" printf "%s\n" "$ac_try_echo"; } >&5 (eval "$ac_link_default") 2>&5 ac_status=$? printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } then : # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. # So ignore a value of `no', otherwise this would lead to `EXEEXT = no' # in a Makefile. We should not override ac_cv_exeext if it was cached, # so that the user can short-circuit this test for compilers unknown to # Autoconf. for ac_file in $ac_files '' do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; [ab].out ) # We found the default executable, but exeext='' is most # certainly right. break;; *.* ) if test ${ac_cv_exeext+y} && test "$ac_cv_exeext" != no; then :; else ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` fi # We set ac_cv_exeext here because the later test for it is not # safe: cross compilers may not add the suffix if given an `-o' # argument, so we may need to know it at that point already. # Even if this section looks crufty: it has the advantage of # actually working. break;; * ) break;; esac done test "$ac_cv_exeext" = no && ac_cv_exeext= else $as_nop ac_file='' fi if test -z "$ac_file" then : { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5 printf "%s\n" "no" >&6; } printf "%s\n" "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error 77 "C++ compiler cannot create executables See \`config.log' for more details" "$LINENO" 5; } else $as_nop { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5 printf "%s\n" "yes" >&6; } fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for C++ compiler default output file name" >&5 printf %s "checking for C++ compiler default output file name... " >&6; } { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 printf "%s\n" "$ac_file" >&6; } ac_exeext=$ac_cv_exeext rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out ac_clean_files=$ac_clean_files_save { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 printf %s "checking for suffix of executables... " >&6; } if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" printf "%s\n" "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } then : # If both `conftest.exe' and `conftest' are `present' (well, observable) # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will # work properly (i.e., refer to `conftest.exe'), while it won't with # `rm'. for ac_file in conftest.exe conftest conftest.*; do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` break;; * ) break;; esac done else $as_nop { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "cannot compute suffix of executables: cannot compile and link See \`config.log' for more details" "$LINENO" 5; } fi rm -f conftest conftest$ac_cv_exeext { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 printf "%s\n" "$ac_cv_exeext" >&6; } rm -f conftest.$ac_ext EXEEXT=$ac_cv_exeext ac_exeext=$EXEEXT cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int main (void) { FILE *f = fopen ("conftest.out", "w"); return ferror (f) || fclose (f) != 0; ; return 0; } _ACEOF ac_clean_files="$ac_clean_files conftest.out" # Check that the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 printf %s "checking whether we are cross compiling... " >&6; } if test "$cross_compiling" != yes; then { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" printf "%s\n" "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } if { ac_try='./conftest$ac_cv_exeext' { { case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" printf "%s\n" "$ac_try_echo"; } >&5 (eval "$ac_try") 2>&5 ac_status=$? printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; }; then cross_compiling=no else if test "$cross_compiling" = maybe; then cross_compiling=yes else { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error 77 "cannot run C++ compiled programs. If you meant to cross compile, use \`--host'. See \`config.log' for more details" "$LINENO" 5; } fi fi fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 printf "%s\n" "$cross_compiling" >&6; } rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out ac_clean_files=$ac_clean_files_save { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 printf %s "checking for suffix of object files... " >&6; } if test ${ac_cv_objext+y} then : printf %s "(cached) " >&6 else $as_nop cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main (void) { ; return 0; } _ACEOF rm -f conftest.o conftest.obj if { { ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" printf "%s\n" "$ac_try_echo"; } >&5 (eval "$ac_compile") 2>&5 ac_status=$? printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } then : for ac_file in conftest.o conftest.obj conftest.*; do test -f "$ac_file" || continue; case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` break;; esac done else $as_nop printf "%s\n" "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "cannot compute suffix of object files: cannot compile See \`config.log' for more details" "$LINENO" 5; } fi rm -f conftest.$ac_cv_objext conftest.$ac_ext fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 printf "%s\n" "$ac_cv_objext" >&6; } OBJEXT=$ac_cv_objext ac_objext=$OBJEXT { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether the compiler supports GNU C++" >&5 printf %s "checking whether the compiler supports GNU C++... " >&6; } if test ${ac_cv_cxx_compiler_gnu+y} then : printf %s "(cached) " >&6 else $as_nop cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main (void) { #ifndef __GNUC__ choke me #endif ; return 0; } _ACEOF if ac_fn_cxx_try_compile "$LINENO" then : ac_compiler_gnu=yes else $as_nop ac_compiler_gnu=no fi rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ac_cv_cxx_compiler_gnu=$ac_compiler_gnu fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_cxx_compiler_gnu" >&5 printf "%s\n" "$ac_cv_cxx_compiler_gnu" >&6; } ac_compiler_gnu=$ac_cv_cxx_compiler_gnu if test $ac_compiler_gnu = yes; then GXX=yes else GXX= fi ac_test_CXXFLAGS=${CXXFLAGS+y} ac_save_CXXFLAGS=$CXXFLAGS { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -g" >&5 printf %s "checking whether $CXX accepts -g... " >&6; } if test ${ac_cv_prog_cxx_g+y} then : printf %s "(cached) " >&6 else $as_nop ac_save_cxx_werror_flag=$ac_cxx_werror_flag ac_cxx_werror_flag=yes ac_cv_prog_cxx_g=no CXXFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main (void) { ; return 0; } _ACEOF if ac_fn_cxx_try_compile "$LINENO" then : ac_cv_prog_cxx_g=yes else $as_nop CXXFLAGS="" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main (void) { ; return 0; } _ACEOF if ac_fn_cxx_try_compile "$LINENO" then : else $as_nop ac_cxx_werror_flag=$ac_save_cxx_werror_flag CXXFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main (void) { ; return 0; } _ACEOF if ac_fn_cxx_try_compile "$LINENO" then : ac_cv_prog_cxx_g=yes fi rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ac_cxx_werror_flag=$ac_save_cxx_werror_flag fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cxx_g" >&5 printf "%s\n" "$ac_cv_prog_cxx_g" >&6; } if test $ac_test_CXXFLAGS; then CXXFLAGS=$ac_save_CXXFLAGS elif test $ac_cv_prog_cxx_g = yes; then if test "$GXX" = yes; then CXXFLAGS="-g -O2" else CXXFLAGS="-g" fi else if test "$GXX" = yes; then CXXFLAGS="-O2" else CXXFLAGS= fi fi ac_prog_cxx_stdcxx=no if test x$ac_prog_cxx_stdcxx = xno then : { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $CXX option to enable C++11 features" >&5 printf %s "checking for $CXX option to enable C++11 features... " >&6; } if test ${ac_cv_prog_cxx_cxx11+y} then : printf %s "(cached) " >&6 else $as_nop ac_cv_prog_cxx_cxx11=no ac_save_CXX=$CXX cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $ac_cxx_conftest_cxx11_program _ACEOF for ac_arg in '' -std=gnu++11 -std=gnu++0x -std=c++11 -std=c++0x -qlanglvl=extended0x -AA do CXX="$ac_save_CXX $ac_arg" if ac_fn_cxx_try_compile "$LINENO" then : ac_cv_prog_cxx_cxx11=$ac_arg fi rm -f core conftest.err conftest.$ac_objext conftest.beam test "x$ac_cv_prog_cxx_cxx11" != "xno" && break done rm -f conftest.$ac_ext CXX=$ac_save_CXX fi if test "x$ac_cv_prog_cxx_cxx11" = xno then : { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 printf "%s\n" "unsupported" >&6; } else $as_nop if test "x$ac_cv_prog_cxx_cxx11" = x then : { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 printf "%s\n" "none needed" >&6; } else $as_nop { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cxx_cxx11" >&5 printf "%s\n" "$ac_cv_prog_cxx_cxx11" >&6; } CXX="$CXX $ac_cv_prog_cxx_cxx11" fi ac_cv_prog_cxx_stdcxx=$ac_cv_prog_cxx_cxx11 ac_prog_cxx_stdcxx=cxx11 fi fi if test x$ac_prog_cxx_stdcxx = xno then : { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $CXX option to enable C++98 features" >&5 printf %s "checking for $CXX option to enable C++98 features... " >&6; } if test ${ac_cv_prog_cxx_cxx98+y} then : printf %s "(cached) " >&6 else $as_nop ac_cv_prog_cxx_cxx98=no ac_save_CXX=$CXX cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $ac_cxx_conftest_cxx98_program _ACEOF for ac_arg in '' -std=gnu++98 -std=c++98 -qlanglvl=extended -AA do CXX="$ac_save_CXX $ac_arg" if ac_fn_cxx_try_compile "$LINENO" then : ac_cv_prog_cxx_cxx98=$ac_arg fi rm -f core conftest.err conftest.$ac_objext conftest.beam test "x$ac_cv_prog_cxx_cxx98" != "xno" && break done rm -f conftest.$ac_ext CXX=$ac_save_CXX fi if test "x$ac_cv_prog_cxx_cxx98" = xno then : { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 printf "%s\n" "unsupported" >&6; } else $as_nop if test "x$ac_cv_prog_cxx_cxx98" = x then : { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 printf "%s\n" "none needed" >&6; } else $as_nop { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cxx_cxx98" >&5 printf "%s\n" "$ac_cv_prog_cxx_cxx98" >&6; } CXX="$CXX $ac_cv_prog_cxx_cxx98" fi ac_cv_prog_cxx_stdcxx=$ac_cv_prog_cxx_cxx98 ac_prog_cxx_stdcxx=cxx98 fi fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu ac_ext=cpp ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu # Extract the first word of "mkoctfile", so it can be a program name with args. set dummy mkoctfile; ac_word=$2 { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 printf %s "checking for $ac_word... " >&6; } if test ${ac_cv_prog_HAVE_MKOCTFILE+y} then : printf %s "(cached) " >&6 else $as_nop if test -n "$HAVE_MKOCTFILE"; then ac_cv_prog_HAVE_MKOCTFILE="$HAVE_MKOCTFILE" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS case $as_dir in #((( '') as_dir=./ ;; */) ;; *) as_dir=$as_dir/ ;; esac for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then ac_cv_prog_HAVE_MKOCTFILE="yes" printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS test -z "$ac_cv_prog_HAVE_MKOCTFILE" && ac_cv_prog_HAVE_MKOCTFILE="no" fi fi HAVE_MKOCTFILE=$ac_cv_prog_HAVE_MKOCTFILE if test -n "$HAVE_MKOCTFILE"; then { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $HAVE_MKOCTFILE" >&5 printf "%s\n" "$HAVE_MKOCTFILE" >&6; } else { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5 printf "%s\n" "no" >&6; } fi if test $HAVE_MKOCTFILE = "no"; then as_fn_error $? "mkoctfile required to install $PACKAGE_NAME" "$LINENO" 5 fi # Extract the first word of "fltk-config", so it can be a program name with args. set dummy fltk-config; ac_word=$2 { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 printf %s "checking for $ac_word... " >&6; } if test ${ac_cv_path_FLTK_CONFIG+y} then : printf %s "(cached) " >&6 else $as_nop case $FLTK_CONFIG in [\\/]* | ?:[\\/]*) ac_cv_path_FLTK_CONFIG="$FLTK_CONFIG" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS case $as_dir in #((( '') as_dir=./ ;; */) ;; *) as_dir=$as_dir/ ;; esac for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then ac_cv_path_FLTK_CONFIG="$as_dir$ac_word$ac_exec_ext" printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS test -z "$ac_cv_path_FLTK_CONFIG" && ac_cv_path_FLTK_CONFIG="no" ;; esac fi FLTK_CONFIG=$ac_cv_path_FLTK_CONFIG if test -n "$FLTK_CONFIG"; then { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $FLTK_CONFIG" >&5 printf "%s\n" "$FLTK_CONFIG" >&6; } else { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5 printf "%s\n" "no" >&6; } fi if test $FLTK_CONFIG = "no"; then as_fn_error $? "fltk-config required to install $PACKAGE_NAME" "$LINENO" 5 else LIBS="`fltk-config --ldflags` $LIBS" fi # Checks for libraries. { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for v4l2_open in -lv4l2" >&5 printf %s "checking for v4l2_open in -lv4l2... " >&6; } if test ${ac_cv_lib_v4l2_v4l2_open+y} then : printf %s "(cached) " >&6 else $as_nop ac_check_lib_save_LIBS=$LIBS LIBS="-lv4l2 $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ namespace conftest { extern "C" int v4l2_open (); } int main (void) { return conftest::v4l2_open (); ; return 0; } _ACEOF if ac_fn_cxx_try_link "$LINENO" then : ac_cv_lib_v4l2_v4l2_open=yes else $as_nop ac_cv_lib_v4l2_v4l2_open=no fi rm -f core conftest.err conftest.$ac_objext conftest.beam \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_v4l2_v4l2_open" >&5 printf "%s\n" "$ac_cv_lib_v4l2_v4l2_open" >&6; } if test "x$ac_cv_lib_v4l2_v4l2_open" = xyes then : printf "%s\n" "#define HAVE_LIBV4L2 1" >>confdefs.h LIBS="-lv4l2 $LIBS" else $as_nop as_fn_error $? "unable to find the v4l2_open() function" "$LINENO" 5 fi # Checks for header files. ac_header_dirent=no for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h; do as_ac_Header=`printf "%s\n" "ac_cv_header_dirent_$ac_hdr" | $as_tr_sh` { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_hdr that defines DIR" >&5 printf %s "checking for $ac_hdr that defines DIR... " >&6; } if eval test \${$as_ac_Header+y} then : printf %s "(cached) " >&6 else $as_nop cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include <$ac_hdr> int main (void) { if ((DIR *) 0) return 0; ; return 0; } _ACEOF if ac_fn_cxx_try_compile "$LINENO" then : eval "$as_ac_Header=yes" else $as_nop eval "$as_ac_Header=no" fi rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext fi eval ac_res=\$$as_ac_Header { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 printf "%s\n" "$ac_res" >&6; } if eval test \"x\$"$as_ac_Header"\" = x"yes" then : cat >>confdefs.h <<_ACEOF #define `printf "%s\n" "HAVE_$ac_hdr" | $as_tr_cpp` 1 _ACEOF ac_header_dirent=$ac_hdr; break fi done # Two versions of opendir et al. are in -ldir and -lx on SCO Xenix. if test $ac_header_dirent = dirent.h; then { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for library containing opendir" >&5 printf %s "checking for library containing opendir... " >&6; } if test ${ac_cv_search_opendir+y} then : printf %s "(cached) " >&6 else $as_nop ac_func_search_save_LIBS=$LIBS cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ namespace conftest { extern "C" int opendir (); } int main (void) { return conftest::opendir (); ; return 0; } _ACEOF for ac_lib in '' dir do if test -z "$ac_lib"; then ac_res="none required" else ac_res=-l$ac_lib LIBS="-l$ac_lib $ac_func_search_save_LIBS" fi if ac_fn_cxx_try_link "$LINENO" then : ac_cv_search_opendir=$ac_res fi rm -f core conftest.err conftest.$ac_objext conftest.beam \ conftest$ac_exeext if test ${ac_cv_search_opendir+y} then : break fi done if test ${ac_cv_search_opendir+y} then : else $as_nop ac_cv_search_opendir=no fi rm conftest.$ac_ext LIBS=$ac_func_search_save_LIBS fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_opendir" >&5 printf "%s\n" "$ac_cv_search_opendir" >&6; } ac_res=$ac_cv_search_opendir if test "$ac_res" != no then : test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" fi else { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for library containing opendir" >&5 printf %s "checking for library containing opendir... " >&6; } if test ${ac_cv_search_opendir+y} then : printf %s "(cached) " >&6 else $as_nop ac_func_search_save_LIBS=$LIBS cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ namespace conftest { extern "C" int opendir (); } int main (void) { return conftest::opendir (); ; return 0; } _ACEOF for ac_lib in '' x do if test -z "$ac_lib"; then ac_res="none required" else ac_res=-l$ac_lib LIBS="-l$ac_lib $ac_func_search_save_LIBS" fi if ac_fn_cxx_try_link "$LINENO" then : ac_cv_search_opendir=$ac_res fi rm -f core conftest.err conftest.$ac_objext conftest.beam \ conftest$ac_exeext if test ${ac_cv_search_opendir+y} then : break fi done if test ${ac_cv_search_opendir+y} then : else $as_nop ac_cv_search_opendir=no fi rm conftest.$ac_ext LIBS=$ac_func_search_save_LIBS fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_opendir" >&5 printf "%s\n" "$ac_cv_search_opendir" >&6; } ac_res=$ac_cv_search_opendir if test "$ac_res" != no then : test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" fi fi ac_header= ac_cache= for ac_item in $ac_header_cxx_list do if test $ac_cache; then ac_fn_cxx_check_header_compile "$LINENO" $ac_header ac_cv_header_$ac_cache "$ac_includes_default" if eval test \"x\$ac_cv_header_$ac_cache\" = xyes; then printf "%s\n" "#define $ac_item 1" >> confdefs.h fi ac_header= ac_cache= elif test $ac_header; then ac_cache=$ac_item else ac_header=$ac_item fi done if test $ac_cv_header_stdlib_h = yes && test $ac_cv_header_string_h = yes then : printf "%s\n" "#define STDC_HEADERS 1" >>confdefs.h fi ac_fn_cxx_check_header_compile "$LINENO" "fcntl.h" "ac_cv_header_fcntl_h" "$ac_includes_default" if test "x$ac_cv_header_fcntl_h" = xyes then : printf "%s\n" "#define HAVE_FCNTL_H 1" >>confdefs.h fi ac_fn_cxx_check_header_compile "$LINENO" "stdlib.h" "ac_cv_header_stdlib_h" "$ac_includes_default" if test "x$ac_cv_header_stdlib_h" = xyes then : printf "%s\n" "#define HAVE_STDLIB_H 1" >>confdefs.h fi ac_fn_cxx_check_header_compile "$LINENO" "string.h" "ac_cv_header_string_h" "$ac_includes_default" if test "x$ac_cv_header_string_h" = xyes then : printf "%s\n" "#define HAVE_STRING_H 1" >>confdefs.h fi ac_fn_cxx_check_header_compile "$LINENO" "sys/ioctl.h" "ac_cv_header_sys_ioctl_h" "$ac_includes_default" if test "x$ac_cv_header_sys_ioctl_h" = xyes then : printf "%s\n" "#define HAVE_SYS_IOCTL_H 1" >>confdefs.h fi ac_fn_cxx_check_header_compile "$LINENO" "sys/time.h" "ac_cv_header_sys_time_h" "$ac_includes_default" if test "x$ac_cv_header_sys_time_h" = xyes then : printf "%s\n" "#define HAVE_SYS_TIME_H 1" >>confdefs.h fi # check for v4l2 headers for ac_header in libv4l2.h linux/videodev2.h do : as_ac_Header=`printf "%s\n" "ac_cv_header_$ac_header" | $as_tr_sh` ac_fn_cxx_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" if eval test \"x\$"$as_ac_Header"\" = x"yes" then : cat >>confdefs.h <<_ACEOF #define `printf "%s\n" "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF else $as_nop as_fn_error $? "unable to find the needed v4l2 headers" "$LINENO" 5 fi done # check for fltk headers for ac_header in FL/Fl.H FL/Fl_Double_Window.H FL/fl_draw.H do : as_ac_Header=`printf "%s\n" "ac_cv_header_$ac_header" | $as_tr_sh` ac_fn_cxx_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" if eval test \"x\$"$as_ac_Header"\" = x"yes" then : cat >>confdefs.h <<_ACEOF #define `printf "%s\n" "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF else $as_nop as_fn_error $? "unable to find the needed fltk headers" "$LINENO" 5 fi done # Checks for library functions. { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for error_at_line" >&5 printf %s "checking for error_at_line... " >&6; } if test ${ac_cv_lib_error_at_line+y} then : printf %s "(cached) " >&6 else $as_nop cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int main (void) { error_at_line (0, 0, "", 0, "an error occurred"); ; return 0; } _ACEOF if ac_fn_cxx_try_link "$LINENO" then : ac_cv_lib_error_at_line=yes else $as_nop ac_cv_lib_error_at_line=no fi rm -f core conftest.err conftest.$ac_objext conftest.beam \ conftest$ac_exeext conftest.$ac_ext fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_error_at_line" >&5 printf "%s\n" "$ac_cv_lib_error_at_line" >&6; } if test $ac_cv_lib_error_at_line = no; then case " $LIBOBJS " in *" error.$ac_objext "* ) ;; *) LIBOBJS="$LIBOBJS error.$ac_objext" ;; esac fi # Make sure we can run config.sub. $SHELL "${ac_aux_dir}config.sub" sun4 >/dev/null 2>&1 || as_fn_error $? "cannot run $SHELL ${ac_aux_dir}config.sub" "$LINENO" 5 { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 printf %s "checking build system type... " >&6; } if test ${ac_cv_build+y} then : printf %s "(cached) " >&6 else $as_nop ac_build_alias=$build_alias test "x$ac_build_alias" = x && ac_build_alias=`$SHELL "${ac_aux_dir}config.guess"` test "x$ac_build_alias" = x && as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 ac_cv_build=`$SHELL "${ac_aux_dir}config.sub" $ac_build_alias` || as_fn_error $? "$SHELL ${ac_aux_dir}config.sub $ac_build_alias failed" "$LINENO" 5 fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 printf "%s\n" "$ac_cv_build" >&6; } case $ac_cv_build in *-*-*) ;; *) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;; esac build=$ac_cv_build ac_save_IFS=$IFS; IFS='-' set x $ac_cv_build shift build_cpu=$1 build_vendor=$2 shift; shift # Remember, the first character of IFS is used to create $*, # except with old shells: build_os=$* IFS=$ac_save_IFS case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 printf %s "checking host system type... " >&6; } if test ${ac_cv_host+y} then : printf %s "(cached) " >&6 else $as_nop if test "x$host_alias" = x; then ac_cv_host=$ac_cv_build else ac_cv_host=`$SHELL "${ac_aux_dir}config.sub" $host_alias` || as_fn_error $? "$SHELL ${ac_aux_dir}config.sub $host_alias failed" "$LINENO" 5 fi fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 printf "%s\n" "$ac_cv_host" >&6; } case $ac_cv_host in *-*-*) ;; *) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;; esac host=$ac_cv_host ac_save_IFS=$IFS; IFS='-' set x $ac_cv_host shift host_cpu=$1 host_vendor=$2 shift; shift # Remember, the first character of IFS is used to create $*, # except with old shells: host_os=$* IFS=$ac_save_IFS case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac ac_func= for ac_item in $ac_func_cxx_list do if test $ac_func; then ac_fn_cxx_check_func "$LINENO" $ac_func ac_cv_func_$ac_func if eval test \"x\$ac_cv_func_$ac_func\" = xyes; then echo "#define $ac_item 1" >> confdefs.h fi ac_func= else ac_func=$ac_item fi done { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for working mmap" >&5 printf %s "checking for working mmap... " >&6; } if test ${ac_cv_func_mmap_fixed_mapped+y} then : printf %s "(cached) " >&6 else $as_nop if test "$cross_compiling" = yes then : case "$host_os" in # (( # Guess yes on platforms where we know the result. linux*) ac_cv_func_mmap_fixed_mapped=yes ;; # If we don't know, assume the worst. *) ac_cv_func_mmap_fixed_mapped=no ;; esac else $as_nop cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $ac_includes_default /* malloc might have been renamed as rpl_malloc. */ #undef malloc /* Thanks to Mike Haertel and Jim Avera for this test. Here is a matrix of mmap possibilities: mmap private not fixed mmap private fixed at somewhere currently unmapped mmap private fixed at somewhere already mapped mmap shared not fixed mmap shared fixed at somewhere currently unmapped mmap shared fixed at somewhere already mapped For private mappings, we should verify that changes cannot be read() back from the file, nor mmap's back from the file at a different address. (There have been systems where private was not correctly implemented like the infamous i386 svr4.0, and systems where the VM page cache was not coherent with the file system buffer cache like early versions of FreeBSD and possibly contemporary NetBSD.) For shared mappings, we should conversely verify that changes get propagated back to all the places they're supposed to be. Grep wants private fixed already mapped. The main things grep needs to know about mmap are: * does it exist and is it safe to write into the mmap'd area * how to use it (BSD variants) */ #include #include /* This mess was copied from the GNU getpagesize.h. */ #ifndef HAVE_GETPAGESIZE # ifdef _SC_PAGESIZE # define getpagesize() sysconf(_SC_PAGESIZE) # else /* no _SC_PAGESIZE */ # ifdef HAVE_SYS_PARAM_H # include # ifdef EXEC_PAGESIZE # define getpagesize() EXEC_PAGESIZE # else /* no EXEC_PAGESIZE */ # ifdef NBPG # define getpagesize() NBPG * CLSIZE # ifndef CLSIZE # define CLSIZE 1 # endif /* no CLSIZE */ # else /* no NBPG */ # ifdef NBPC # define getpagesize() NBPC # else /* no NBPC */ # ifdef PAGESIZE # define getpagesize() PAGESIZE # endif /* PAGESIZE */ # endif /* no NBPC */ # endif /* no NBPG */ # endif /* no EXEC_PAGESIZE */ # else /* no HAVE_SYS_PARAM_H */ # define getpagesize() 8192 /* punt totally */ # endif /* no HAVE_SYS_PARAM_H */ # endif /* no _SC_PAGESIZE */ #endif /* no HAVE_GETPAGESIZE */ int main (void) { char *data, *data2, *data3; const char *cdata2; int i, pagesize; int fd, fd2; pagesize = getpagesize (); /* First, make a file with some known garbage in it. */ data = (char *) malloc (pagesize); if (!data) return 1; for (i = 0; i < pagesize; ++i) *(data + i) = rand (); umask (0); fd = creat ("conftest.mmap", 0600); if (fd < 0) return 2; if (write (fd, data, pagesize) != pagesize) return 3; close (fd); /* Next, check that the tail of a page is zero-filled. File must have non-zero length, otherwise we risk SIGBUS for entire page. */ fd2 = open ("conftest.txt", O_RDWR | O_CREAT | O_TRUNC, 0600); if (fd2 < 0) return 4; cdata2 = ""; if (write (fd2, cdata2, 1) != 1) return 5; data2 = (char *) mmap (0, pagesize, PROT_READ | PROT_WRITE, MAP_SHARED, fd2, 0L); if (data2 == MAP_FAILED) return 6; for (i = 0; i < pagesize; ++i) if (*(data2 + i)) return 7; close (fd2); if (munmap (data2, pagesize)) return 8; /* Next, try to mmap the file at a fixed address which already has something else allocated at it. If we can, also make sure that we see the same garbage. */ fd = open ("conftest.mmap", O_RDWR); if (fd < 0) return 9; if (data2 != mmap (data2, pagesize, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_FIXED, fd, 0L)) return 10; for (i = 0; i < pagesize; ++i) if (*(data + i) != *(data2 + i)) return 11; /* Finally, make sure that changes to the mapped area do not percolate back to the file as seen by read(). (This is a bug on some variants of i386 svr4.0.) */ for (i = 0; i < pagesize; ++i) *(data2 + i) = *(data2 + i) + 1; data3 = (char *) malloc (pagesize); if (!data3) return 12; if (read (fd, data3, pagesize) != pagesize) return 13; for (i = 0; i < pagesize; ++i) if (*(data + i) != *(data3 + i)) return 14; close (fd); free (data); free (data3); return 0; } _ACEOF if ac_fn_cxx_try_run "$LINENO" then : ac_cv_func_mmap_fixed_mapped=yes else $as_nop ac_cv_func_mmap_fixed_mapped=no fi rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ conftest.$ac_objext conftest.beam conftest.$ac_ext fi fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_mmap_fixed_mapped" >&5 printf "%s\n" "$ac_cv_func_mmap_fixed_mapped" >&6; } if test $ac_cv_func_mmap_fixed_mapped = yes; then printf "%s\n" "#define HAVE_MMAP 1" >>confdefs.h fi rm -f conftest.mmap conftest.txt { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for GNU libc compatible realloc" >&5 printf %s "checking for GNU libc compatible realloc... " >&6; } if test ${ac_cv_func_realloc_0_nonnull+y} then : printf %s "(cached) " >&6 else $as_nop if test "$cross_compiling" = yes then : case "$host_os" in # (( # Guess yes on platforms where we know the result. *-gnu* | freebsd* | netbsd* | openbsd* | bitrig* \ | hpux* | solaris* | cygwin* | mingw* | msys* ) ac_cv_func_realloc_0_nonnull=yes ;; # If we don't know, assume the worst. *) ac_cv_func_realloc_0_nonnull=no ;; esac else $as_nop cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int main (void) { void *p = realloc (0, 0); int result = !p; free (p); return result; ; return 0; } _ACEOF if ac_fn_cxx_try_run "$LINENO" then : ac_cv_func_realloc_0_nonnull=yes else $as_nop ac_cv_func_realloc_0_nonnull=no fi rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ conftest.$ac_objext conftest.beam conftest.$ac_ext fi fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_realloc_0_nonnull" >&5 printf "%s\n" "$ac_cv_func_realloc_0_nonnull" >&6; } if test $ac_cv_func_realloc_0_nonnull = yes then : printf "%s\n" "#define HAVE_REALLOC 1" >>confdefs.h else $as_nop printf "%s\n" "#define HAVE_REALLOC 0" >>confdefs.h case " $LIBOBJS " in *" realloc.$ac_objext "* ) ;; *) LIBOBJS="$LIBOBJS realloc.$ac_objext" ;; esac printf "%s\n" "#define realloc rpl_realloc" >>confdefs.h fi ac_fn_cxx_check_func "$LINENO" "munmap" "ac_cv_func_munmap" if test "x$ac_cv_func_munmap" = xyes then : printf "%s\n" "#define HAVE_MUNMAP 1" >>confdefs.h fi ac_fn_cxx_check_func "$LINENO" "select" "ac_cv_func_select" if test "x$ac_cv_func_select" = xyes then : printf "%s\n" "#define HAVE_SELECT 1" >>confdefs.h fi ac_fn_cxx_check_func "$LINENO" "strerror" "ac_cv_func_strerror" if test "x$ac_cv_func_strerror" = xyes then : printf "%s\n" "#define HAVE_STRERROR 1" >>confdefs.h fi ac_config_files="$ac_config_files Makefile" cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure # scripts and configure runs, see configure's option --config-cache. # It is not useful on other systems. If it contains results you don't # want to keep, you may remove or edit it. # # config.status only pays attention to the cache file if you give it # the --recheck option to rerun configure. # # `ac_cv_env_foo' variables (set or unset) will be overridden when # loading this file, other *unset* `ac_cv_foo' will be assigned the # following values. _ACEOF # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. # So, we kill variables containing newlines. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. ( for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( *_cv_*) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 printf "%s\n" "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( *) { eval $ac_var=; unset $ac_var;} ;; esac ;; esac done (set) 2>&1 | case $as_nl`(ac_space=' '; set) 2>&1` in #( *${as_nl}ac_space=\ *) # `set' does not quote correctly, so add quotes: double-quote # substitution turns \\\\ into \\, and sed turns \\ into \. sed -n \ "s/'/'\\\\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" ;; #( *) # `set' quotes correctly as required by POSIX, so do not add quotes. sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; esac | sort ) | sed ' /^ac_cv_env_/b end t clear :clear s/^\([^=]*\)=\(.*[{}].*\)$/test ${\1+y} || &/ t end s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ :end' >>confcache if diff "$cache_file" confcache >/dev/null 2>&1; then :; else if test -w "$cache_file"; then if test "x$cache_file" != "x/dev/null"; then { printf "%s\n" "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 printf "%s\n" "$as_me: updating cache $cache_file" >&6;} if test ! -f "$cache_file" || test -h "$cache_file"; then cat confcache >"$cache_file" else case $cache_file in #( */* | ?:*) mv -f confcache "$cache_file"$$ && mv -f "$cache_file"$$ "$cache_file" ;; #( *) mv -f confcache "$cache_file" ;; esac fi fi else { printf "%s\n" "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 printf "%s\n" "$as_me: not updating unwritable cache $cache_file" >&6;} fi fi rm -f confcache test "x$prefix" = xNONE && prefix=$ac_default_prefix # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' # Transform confdefs.h into DEFS. # Protect against shell expansion while executing Makefile rules. # Protect against Makefile macro expansion. # # If the first sed substitution is executed (which looks for macros that # take arguments), then branch to the quote section. Otherwise, # look for a macro that doesn't take arguments. ac_script=' :mline /\\$/{ N s,\\\n,, b mline } t clear :clear s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g t quote s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g t quote b any :quote s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g s/\[/\\&/g s/\]/\\&/g s/\$/$$/g H :any ${ g s/^\n// s/\n/ /g p } ' DEFS=`sed -n "$ac_script" confdefs.h` ac_libobjs= ac_ltlibobjs= U= for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue # 1. Remove the extension, and $U if already installed. ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' ac_i=`printf "%s\n" "$ac_i" | sed "$ac_script"` # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR # will be set to the directory where LIBOBJS objects are built. as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' done LIBOBJS=$ac_libobjs LTLIBOBJS=$ac_ltlibobjs : "${CONFIG_STATUS=./config.status}" ac_write_fail=0 ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files $CONFIG_STATUS" { printf "%s\n" "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 printf "%s\n" "$as_me: creating $CONFIG_STATUS" >&6;} as_write_fail=0 cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 #! $SHELL # Generated by $as_me. # Run this file to recreate the current configuration. # Compiler output produced by configure, useful for debugging # configure, is in config.log if it exists. debug=false ac_cs_recheck=false ac_cs_silent=false SHELL=\${CONFIG_SHELL-$SHELL} export SHELL _ASEOF cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 ## -------------------- ## ## M4sh Initialization. ## ## -------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh as_nop=: if test ${ZSH_VERSION+y} && (emulate sh) >/dev/null 2>&1 then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else $as_nop case `(set -o) 2>/dev/null` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi # Reset variables that may have inherited troublesome values from # the environment. # IFS needs to be set, to space, tab, and newline, in precisely that order. # (If _AS_PATH_WALK were called with IFS unset, it would have the # side effect of setting IFS to empty, thus disabling word splitting.) # Quoting is to prevent editors from complaining about space-tab. as_nl=' ' export as_nl IFS=" "" $as_nl" PS1='$ ' PS2='> ' PS4='+ ' # Ensure predictable behavior from utilities with locale-dependent output. LC_ALL=C export LC_ALL LANGUAGE=C export LANGUAGE # We cannot yet rely on "unset" to work, but we need these variables # to be unset--not just set to an empty or harmless value--now, to # avoid bugs in old shells (e.g. pre-3.0 UWIN ksh). This construct # also avoids known problems related to "unset" and subshell syntax # in other old shells (e.g. bash 2.01 and pdksh 5.2.14). for as_var in BASH_ENV ENV MAIL MAILPATH CDPATH do eval test \${$as_var+y} \ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : done # Ensure that fds 0, 1, and 2 are open. if (exec 3>&0) 2>/dev/null; then :; else exec 0&1) 2>/dev/null; then :; else exec 1>/dev/null; fi if (exec 3>&2) ; then :; else exec 2>/dev/null; fi # The user is always right. if ${PATH_SEPARATOR+false} :; then PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || PATH_SEPARATOR=';' } fi # Find who we are. Look in the path if we contain no directory separator. as_myself= case $0 in #(( *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS case $as_dir in #((( '') as_dir=./ ;; */) ;; *) as_dir=$as_dir/ ;; esac test -r "$as_dir$0" && as_myself=$as_dir$0 && break done IFS=$as_save_IFS ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then printf "%s\n" "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 exit 1 fi # as_fn_error STATUS ERROR [LINENO LOG_FD] # ---------------------------------------- # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are # provided, also output the error to LOG_FD, referencing LINENO. Then exit the # script with STATUS, using 1 if that was 0. as_fn_error () { as_status=$1; test $as_status -eq 0 && as_status=1 if test "$4"; then as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 fi printf "%s\n" "$as_me: error: $2" >&2 as_fn_exit $as_status } # as_fn_error # as_fn_set_status STATUS # ----------------------- # Set $? to STATUS, without forking. as_fn_set_status () { return $1 } # as_fn_set_status # as_fn_exit STATUS # ----------------- # Exit the shell with STATUS, even in a "trap 0" or "set -e" context. as_fn_exit () { set +e as_fn_set_status $1 exit $1 } # as_fn_exit # as_fn_unset VAR # --------------- # Portably unset VAR. as_fn_unset () { { eval $1=; unset $1;} } as_unset=as_fn_unset # as_fn_append VAR VALUE # ---------------------- # Append the text in VALUE to the end of the definition contained in VAR. Take # advantage of any shell optimizations that allow amortized linear growth over # repeated appends, instead of the typical quadratic growth present in naive # implementations. if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null then : eval 'as_fn_append () { eval $1+=\$2 }' else $as_nop as_fn_append () { eval $1=\$$1\$2 } fi # as_fn_append # as_fn_arith ARG... # ------------------ # Perform arithmetic evaluation on the ARGs, and store the result in the # global $as_val. Take advantage of shells that can avoid forks. The arguments # must be portable across $(()) and expr. if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null then : eval 'as_fn_arith () { as_val=$(( $* )) }' else $as_nop as_fn_arith () { as_val=`expr "$@" || test $? -eq 1` } fi # as_fn_arith if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then as_dirname=dirname else as_dirname=false fi as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || printf "%s\n" X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits # Determine whether it's possible to make 'echo' print without a newline. # These variables are no longer used directly by Autoconf, but are AC_SUBSTed # for compatibility with existing Makefiles. ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in #((((( -n*) case `echo 'xy\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. xy) ECHO_C='\c';; *) echo `echo ksh88 bug on AIX 6.1` > /dev/null ECHO_T=' ';; esac;; *) ECHO_N='-n';; esac # For backward compatibility with old third-party macros, we provide # the shell variables $as_echo and $as_echo_n. New code should use # AS_ECHO(["message"]) and AS_ECHO_N(["message"]), respectively. as_echo='printf %s\n' as_echo_n='printf %s' rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir mkdir conf$$.dir 2>/dev/null fi if (echo >conf$$.file) 2>/dev/null; then if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. # In both cases, we have to default to `cp -pR'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -pR' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -pR' fi else as_ln_s='cp -pR' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null # as_fn_mkdir_p # ------------- # Create "$as_dir" as a directory, including parents if necessary. as_fn_mkdir_p () { case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || eval $as_mkdir_p || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`printf "%s\n" "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || printf "%s\n" X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" } # as_fn_mkdir_p if mkdir -p . 2>/dev/null; then as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false fi # as_fn_executable_p FILE # ----------------------- # Test if FILE is an executable regular file. as_fn_executable_p () { test -f "$1" && test -x "$1" } # as_fn_executable_p as_test_x='test -x' as_executable_p=as_fn_executable_p # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" exec 6>&1 ## ----------------------------------- ## ## Main body of $CONFIG_STATUS script. ## ## ----------------------------------- ## _ASEOF test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # Save the log message, to keep $0 and so on meaningful, and to # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" This file was extended by Octave-Forge image-acquisition package $as_me 0.1.0, which was generated by GNU Autoconf 2.71. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS CONFIG_LINKS = $CONFIG_LINKS CONFIG_COMMANDS = $CONFIG_COMMANDS $ $0 $@ on `(hostname || uname -n) 2>/dev/null | sed 1q` " _ACEOF case $ac_config_files in *" "*) set x $ac_config_files; shift; ac_config_files=$*;; esac cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 # Files that config.status was made for. config_files="$ac_config_files" _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ac_cs_usage="\ \`$as_me' instantiates files and other configuration actions from templates according to the current configuration. Unless the files and actions are specified as TAGs, all are instantiated by default. Usage: $0 [OPTION]... [TAG]... -h, --help print this help, then exit -V, --version print version number and configuration settings, then exit --config print configuration, then exit -q, --quiet, --silent do not print progress messages -d, --debug don't remove temporary files --recheck update $as_me by reconfiguring in the same conditions --file=FILE[:TEMPLATE] instantiate the configuration file FILE Configuration files: $config_files Report bugs to ." _ACEOF ac_cs_config=`printf "%s\n" "$ac_configure_args" | sed "$ac_safe_unquote"` ac_cs_config_escaped=`printf "%s\n" "$ac_cs_config" | sed "s/^ //; s/'/'\\\\\\\\''/g"` cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_cs_config='$ac_cs_config_escaped' ac_cs_version="\\ Octave-Forge image-acquisition package config.status 0.1.0 configured by $0, generated by GNU Autoconf 2.71, with options \\"\$ac_cs_config\\" Copyright (C) 2021 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." ac_pwd='$ac_pwd' srcdir='$srcdir' test -n "\$AWK" || AWK=awk _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # The default lists apply if the user does not specify any file. ac_need_defaults=: while test $# != 0 do case $1 in --*=?*) ac_option=`expr "X$1" : 'X\([^=]*\)='` ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` ac_shift=: ;; --*=) ac_option=`expr "X$1" : 'X\([^=]*\)='` ac_optarg= ac_shift=: ;; *) ac_option=$1 ac_optarg=$2 ac_shift=shift ;; esac case $ac_option in # Handling of the options. -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ac_cs_recheck=: ;; --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) printf "%s\n" "$ac_cs_version"; exit ;; --config | --confi | --conf | --con | --co | --c ) printf "%s\n" "$ac_cs_config"; exit ;; --debug | --debu | --deb | --de | --d | -d ) debug=: ;; --file | --fil | --fi | --f ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`printf "%s\n" "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; '') as_fn_error $? "missing file argument" ;; esac as_fn_append CONFIG_FILES " '$ac_optarg'" ac_need_defaults=false;; --he | --h | --help | --hel | -h ) printf "%s\n" "$ac_cs_usage"; exit ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil | --si | --s) ac_cs_silent=: ;; # This is an error. -*) as_fn_error $? "unrecognized option: \`$1' Try \`$0 --help' for more information." ;; *) as_fn_append ac_config_targets " $1" ac_need_defaults=false ;; esac shift done ac_configure_extra_args= if $ac_cs_silent; then exec 6>/dev/null ac_configure_extra_args="$ac_configure_extra_args --silent" fi _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 if \$ac_cs_recheck; then set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion shift \printf "%s\n" "running CONFIG_SHELL=$SHELL \$*" >&6 CONFIG_SHELL='$SHELL' export CONFIG_SHELL exec "\$@" fi _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 exec 5>>config.log { echo sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX ## Running $as_me. ## _ASBOX printf "%s\n" "$ac_log" } >&5 _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # Handling of arguments. for ac_config_target in $ac_config_targets do case $ac_config_target in "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; esac done # If the user did not use the arguments to specify the items to instantiate, # then the envvar interface is used. Set only those that are not. # We use the long form for the default assignment because of an extremely # bizarre bug on SunOS 4.1.3. if $ac_need_defaults; then test ${CONFIG_FILES+y} || CONFIG_FILES=$config_files fi # Have a temporary directory for convenience. Make it in the build tree # simply because there is no reason against having it here, and in addition, # creating and moving files from /tmp can sometimes cause problems. # Hook for its removal unless debugging. # Note that there is a small window in which the directory will not be cleaned: # after its creation but before its name has been assigned to `$tmp'. $debug || { tmp= ac_tmp= trap 'exit_status=$? : "${ac_tmp:=$tmp}" { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status ' 0 trap 'as_fn_exit 1' 1 2 13 15 } # Create a (secure) tmp directory for tmp files. { tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && test -d "$tmp" } || { tmp=./conf$$-$RANDOM (umask 077 && mkdir "$tmp") } || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 ac_tmp=$tmp # Set up the scripts for CONFIG_FILES section. # No need to generate them if there are no CONFIG_FILES. # This happens for instance with `./config.status config.h'. if test -n "$CONFIG_FILES"; then ac_cr=`echo X | tr X '\015'` # On cygwin, bash can eat \r inside `` if the user requested igncr. # But we know of no other shell where ac_cr would be empty at this # point, so we can use a bashism as a fallback. if test "x$ac_cr" = x; then eval ac_cr=\$\'\\r\' fi ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then ac_cs_awk_cr='\\r' else ac_cs_awk_cr=$ac_cr fi echo 'BEGIN {' >"$ac_tmp/subs1.awk" && _ACEOF { echo "cat >conf$$subs.awk <<_ACEOF" && echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && echo "_ACEOF" } >conf$$subs.sh || as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` ac_delim='%!_!# ' for ac_last_try in false false false false false :; do . ./conf$$subs.sh || as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` if test $ac_delim_n = $ac_delim_num; then break elif $ac_last_try; then as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi done rm -f conf$$subs.sh cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && _ACEOF sed -n ' h s/^/S["/; s/!.*/"]=/ p g s/^[^!]*!// :repl t repl s/'"$ac_delim"'$// t delim :nl h s/\(.\{148\}\)..*/\1/ t more1 s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ p n b repl :more1 s/["\\]/\\&/g; s/^/"/; s/$/"\\/ p g s/.\{148\}// t nl :delim h s/\(.\{148\}\)..*/\1/ t more2 s/["\\]/\\&/g; s/^/"/; s/$/"/ p b :more2 s/["\\]/\\&/g; s/^/"/; s/$/"\\/ p g s/.\{148\}// t delim ' >$CONFIG_STATUS || ac_write_fail=1 rm -f conf$$subs.awk cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 _ACAWK cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && for (key in S) S_is_set[key] = 1 FS = "" } { line = $ 0 nfields = split(line, field, "@") substed = 0 len = length(field[1]) for (i = 2; i < nfields; i++) { key = field[i] keylen = length(key) if (S_is_set[key]) { value = S[key] line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) len += length(value) + length(field[++i]) substed = 1 } else len += 1 + keylen } print line } _ACAWK _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" else cat fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 _ACEOF # VPATH may cause trouble with some makes, so we remove sole $(srcdir), # ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and # trailing colons and then remove the whole line if VPATH becomes empty # (actually we leave an empty line to preserve line numbers). if test "x$srcdir" = x.; then ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ h s/// s/^/:/ s/[ ]*$/:/ s/:\$(srcdir):/:/g s/:\${srcdir}:/:/g s/:@srcdir@:/:/g s/^:*// s/:*$// x s/\(=[ ]*\).*/\1/ G s/\n// s/^[^=]*=[ ]*$// }' fi cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 fi # test -n "$CONFIG_FILES" eval set X " :F $CONFIG_FILES " shift for ac_tag do case $ac_tag in :[FHLC]) ac_mode=$ac_tag; continue;; esac case $ac_mode$ac_tag in :[FHL]*:*);; :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; :[FH]-) ac_tag=-:-;; :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; esac ac_save_IFS=$IFS IFS=: set x $ac_tag IFS=$ac_save_IFS shift ac_file=$1 shift case $ac_mode in :L) ac_source=$1;; :[FH]) ac_file_inputs= for ac_f do case $ac_f in -) ac_f="$ac_tmp/stdin";; *) # Look for the file first in the build tree, then in the source tree # (if the path is not absolute). The absolute path cannot be DOS-style, # because $ac_f cannot contain `:'. test -f "$ac_f" || case $ac_f in [\\/$]*) false;; *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; esac || as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; esac case $ac_f in *\'*) ac_f=`printf "%s\n" "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac as_fn_append ac_file_inputs " '$ac_f'" done # Let's still pretend it is `configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ configure_input='Generated from '` printf "%s\n" "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' `' by configure.' if test x"$ac_file" != x-; then configure_input="$ac_file. $configure_input" { printf "%s\n" "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 printf "%s\n" "$as_me: creating $ac_file" >&6;} fi # Neutralize special characters interpreted by sed in replacement strings. case $configure_input in #( *\&* | *\|* | *\\* ) ac_sed_conf_input=`printf "%s\n" "$configure_input" | sed 's/[\\\\&|]/\\\\&/g'`;; #( *) ac_sed_conf_input=$configure_input;; esac case $ac_tag in *:-:* | *:-) cat >"$ac_tmp/stdin" \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; esac ;; esac ac_dir=`$as_dirname -- "$ac_file" || $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_file" : 'X\(//\)[^/]' \| \ X"$ac_file" : 'X\(//\)$' \| \ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || printf "%s\n" X"$ac_file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` as_dir="$ac_dir"; as_fn_mkdir_p ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`printf "%s\n" "$ac_dir" | sed 's|^\.[\\/]||'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`printf "%s\n" "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix case $ac_mode in :F) # # CONFIG_FILE # _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # If the template does not know about datarootdir, expand it. # FIXME: This hack should be removed a few years after 2.60. ac_datarootdir_hack=; ac_datarootdir_seen= ac_sed_dataroot=' /datarootdir/ { p q } /@datadir@/p /@docdir@/p /@infodir@/p /@localedir@/p /@mandir@/p' case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in *datarootdir*) ac_datarootdir_seen=yes;; *@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 printf "%s\n" "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_datarootdir_hack=' s&@datadir@&$datadir&g s&@docdir@&$docdir&g s&@infodir@&$infodir&g s&@localedir@&$localedir&g s&@mandir@&$mandir&g s&\\\${datarootdir}&$datarootdir&g' ;; esac _ACEOF # Neutralize VPATH when `$srcdir' = `.'. # Shell code in configure.ac might set extrasub. # FIXME: do we really want to maintain this feature? cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_sed_extra="$ac_vpsub $extrasub _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 :t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b s|@configure_input@|$ac_sed_conf_input|;t t s&@top_builddir@&$ac_top_builddir_sub&;t t s&@top_build_prefix@&$ac_top_build_prefix&;t t s&@srcdir@&$ac_srcdir&;t t s&@abs_srcdir@&$ac_abs_srcdir&;t t s&@top_srcdir@&$ac_top_srcdir&;t t s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t s&@builddir@&$ac_builddir&;t t s&@abs_builddir@&$ac_abs_builddir&;t t s&@abs_top_builddir@&$ac_abs_top_builddir&;t t $ac_datarootdir_hack " eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ "$ac_tmp/out"`; test -z "$ac_out"; } && { printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined" >&5 printf "%s\n" "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined" >&2;} rm -f "$ac_tmp/stdin" case $ac_file in -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; esac \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; esac done # for ac_tag as_fn_exit 0 _ACEOF ac_clean_files=$ac_clean_files_save test $ac_write_fail = 0 || as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 # configure is writing to config.log, and then calls config.status. # config.status does its own redirection, appending to config.log. # Unfortunately, on DOS this fails, as config.log is still kept open # by configure, so config.status won't be able to write to it; its # output is simply discarded. So we exec the FD to /dev/null, # effectively closing config.log, so it can be properly (re)opened and # appended to by config.status. When coming back to configure, we # need to make the FD available again. if test "$no_create" != yes; then ac_cs_success=: ac_config_status_args= test "$silent" = yes && ac_config_status_args="$ac_config_status_args --quiet" exec 5>/dev/null $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. $ac_cs_success || as_fn_exit 1 fi if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then { printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 printf "%s\n" "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: $PACKAGE_NAME is now configured with LIBS: $LIBS " >&5 printf "%s\n" "$as_me: $PACKAGE_NAME is now configured with LIBS: $LIBS " >&6;} image-acquisition-0.2.6/src/PaxHeaders/Makefile.in0000644000000000000000000000006214664627164017063 xustar0020 atime=1725116020 30 ctime=1725116039.688927658 image-acquisition-0.2.6/src/Makefile.in0000644000175000017500000000100214664627164017744 0ustar00andyandy00000000000000.PHONY: all clean distclean realclean OCT := __v4l2_handler__.oct OBJ := cl_v4l2_handler.o cl_img_win.o MKOCTFILE ?= mkoctfile MKOCTFLAGS ?= -Wall -v all: $(OBJ) $(OCT) debug : MKOCTFLAGS += -ggdb -O0 debug : all %.o: %.cc %.h $(MKOCTFILE) $(MKOCTFLAGS) -c $< %.oct: %.cc $(OBJ) $(MKOCTFILE) $(MKOCTFLAGS) $^ @LIBS@ -o $@ clean: rm -f *.oct *.o rm -f octave-core octave-workspace distclean: clean rm -f Makefile config.status config.log realclean: distclean rm -f configure rm -rf autom4te.cache image-acquisition-0.2.6/src/PaxHeaders/config.guess0000644000000000000000000000006214664627164017333 xustar0020 atime=1725116020 30 ctime=1725116039.688927658 image-acquisition-0.2.6/src/config.guess0000644000175000017500000014306714664627164020236 0ustar00andyandy00000000000000#! /bin/sh # Attempt to guess a canonical system name. # Copyright 1992-2024 Free Software Foundation, Inc. # shellcheck disable=SC2006,SC2268 # see below for rationale timestamp='2024-07-27' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by # the Free Software Foundation, either version 3 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, see . # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that # program. This Exception is an additional permission under section 7 # of the GNU General Public License, version 3 ("GPLv3"). # # Originally written by Per Bothner; maintained since 2000 by Ben Elliston. # # You can get the latest version of this script from: # https://git.savannah.gnu.org/cgit/config.git/plain/config.guess # # Please send patches to . # The "shellcheck disable" line above the timestamp inhibits complaints # about features and limitations of the classic Bourne shell that were # superseded or lifted in POSIX. However, this script identifies a wide # variety of pre-POSIX systems that do not have POSIX shells at all, and # even some reasonably current systems (Solaris 10 as case-in-point) still # have a pre-POSIX /bin/sh. me=`echo "$0" | sed -e 's,.*/,,'` usage="\ Usage: $0 [OPTION] Output the configuration name of the system '$me' is run on. Options: -h, --help print this help, then exit -t, --time-stamp print date of last modification, then exit -v, --version print version number, then exit Report bugs and patches to ." version="\ GNU config.guess ($timestamp) Originally written by Per Bothner. Copyright 1992-2024 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." help=" Try '$me --help' for more information." # Parse command line while test $# -gt 0 ; do case $1 in --time-stamp | --time* | -t ) echo "$timestamp" ; exit ;; --version | -v ) echo "$version" ; exit ;; --help | --h* | -h ) echo "$usage"; exit ;; -- ) # Stop option processing shift; break ;; - ) # Use stdin as input. break ;; -* ) echo "$me: invalid option $1$help" >&2 exit 1 ;; * ) break ;; esac done if test $# != 0; then echo "$me: too many arguments$help" >&2 exit 1 fi # Just in case it came from the environment. GUESS= # CC_FOR_BUILD -- compiler used by this script. Note that the use of a # compiler to aid in system detection is discouraged as it requires # temporary files to be created and, as you can see below, it is a # headache to deal with in a portable fashion. # Historically, 'CC_FOR_BUILD' used to be named 'HOST_CC'. We still # use 'HOST_CC' if defined, but it is deprecated. # Portable tmp directory creation inspired by the Autoconf team. tmp= # shellcheck disable=SC2172 trap 'test -z "$tmp" || rm -fr "$tmp"' 0 1 2 13 15 set_cc_for_build() { # prevent multiple calls if $tmp is already set test "$tmp" && return 0 : "${TMPDIR=/tmp}" # shellcheck disable=SC2039,SC3028 { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir "$tmp" 2>/dev/null) ; } || { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir "$tmp" 2>/dev/null) && echo "Warning: creating insecure temp directory" >&2 ; } || { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } dummy=$tmp/dummy case ${CC_FOR_BUILD-},${HOST_CC-},${CC-} in ,,) echo "int x;" > "$dummy.c" for driver in cc gcc c17 c99 c89 ; do if ($driver -c -o "$dummy.o" "$dummy.c") >/dev/null 2>&1 ; then CC_FOR_BUILD=$driver break fi done if test x"$CC_FOR_BUILD" = x ; then CC_FOR_BUILD=no_compiler_found fi ;; ,,*) CC_FOR_BUILD=$CC ;; ,*,*) CC_FOR_BUILD=$HOST_CC ;; esac } # This is needed to find uname on a Pyramid OSx when run in the BSD universe. # (ghazi@noc.rutgers.edu 1994-08-24) if test -f /.attbin/uname ; then PATH=$PATH:/.attbin ; export PATH fi UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown case $UNAME_SYSTEM in Linux|GNU|GNU/*) LIBC=unknown set_cc_for_build cat <<-EOF > "$dummy.c" #if defined(__ANDROID__) LIBC=android #else #include #if defined(__UCLIBC__) LIBC=uclibc #elif defined(__dietlibc__) LIBC=dietlibc #elif defined(__GLIBC__) LIBC=gnu #elif defined(__LLVM_LIBC__) LIBC=llvm #else #include /* First heuristic to detect musl libc. */ #ifdef __DEFINED_va_list LIBC=musl #endif #endif #endif EOF cc_set_libc=`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^LIBC' | sed 's, ,,g'` eval "$cc_set_libc" # Second heuristic to detect musl libc. if [ "$LIBC" = unknown ] && command -v ldd >/dev/null && ldd --version 2>&1 | grep -q ^musl; then LIBC=musl fi # If the system lacks a compiler, then just pick glibc. # We could probably try harder. if [ "$LIBC" = unknown ]; then LIBC=gnu fi ;; esac # Note: order is significant - the case branches are not exclusive. case $UNAME_MACHINE:$UNAME_SYSTEM:$UNAME_RELEASE:$UNAME_VERSION in *:NetBSD:*:*) # NetBSD (nbsd) targets should (where applicable) match one or # more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*, # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently # switched to ELF, *-*-netbsd* would select the old # object file format. This provides both forward # compatibility and a consistent mechanism for selecting the # object file format. # # Note: NetBSD doesn't particularly care about the vendor # portion of the name. We always set it to "unknown". UNAME_MACHINE_ARCH=`(uname -p 2>/dev/null || \ /sbin/sysctl -n hw.machine_arch 2>/dev/null || \ /usr/sbin/sysctl -n hw.machine_arch 2>/dev/null || \ echo unknown)` case $UNAME_MACHINE_ARCH in aarch64eb) machine=aarch64_be-unknown ;; armeb) machine=armeb-unknown ;; arm*) machine=arm-unknown ;; sh3el) machine=shl-unknown ;; sh3eb) machine=sh-unknown ;; sh5el) machine=sh5le-unknown ;; earmv*) arch=`echo "$UNAME_MACHINE_ARCH" | sed -e 's,^e\(armv[0-9]\).*$,\1,'` endian=`echo "$UNAME_MACHINE_ARCH" | sed -ne 's,^.*\(eb\)$,\1,p'` machine=${arch}${endian}-unknown ;; *) machine=$UNAME_MACHINE_ARCH-unknown ;; esac # The Operating System including object format, if it has switched # to ELF recently (or will in the future) and ABI. case $UNAME_MACHINE_ARCH in earm*) os=netbsdelf ;; arm*|i386|m68k|ns32k|sh3*|sparc|vax) set_cc_for_build if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ | grep -q __ELF__ then # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). # Return netbsd for either. FIX? os=netbsd else os=netbsdelf fi ;; *) os=netbsd ;; esac # Determine ABI tags. case $UNAME_MACHINE_ARCH in earm*) expr='s/^earmv[0-9]/-eabi/;s/eb$//' abi=`echo "$UNAME_MACHINE_ARCH" | sed -e "$expr"` ;; esac # The OS release # Debian GNU/NetBSD machines have a different userland, and # thus, need a distinct triplet. However, they do not need # kernel version information, so it can be replaced with a # suitable tag, in the style of linux-gnu. case $UNAME_VERSION in Debian*) release='-gnu' ;; *) release=`echo "$UNAME_RELEASE" | sed -e 's/[-_].*//' | cut -d. -f1,2` ;; esac # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: # contains redundant information, the shorter form: # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. GUESS=$machine-${os}${release}${abi-} ;; *:Bitrig:*:*) UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'` GUESS=$UNAME_MACHINE_ARCH-unknown-bitrig$UNAME_RELEASE ;; *:OpenBSD:*:*) UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` GUESS=$UNAME_MACHINE_ARCH-unknown-openbsd$UNAME_RELEASE ;; *:SecBSD:*:*) UNAME_MACHINE_ARCH=`arch | sed 's/SecBSD.//'` GUESS=$UNAME_MACHINE_ARCH-unknown-secbsd$UNAME_RELEASE ;; *:LibertyBSD:*:*) UNAME_MACHINE_ARCH=`arch | sed 's/^.*BSD\.//'` GUESS=$UNAME_MACHINE_ARCH-unknown-libertybsd$UNAME_RELEASE ;; *:MidnightBSD:*:*) GUESS=$UNAME_MACHINE-unknown-midnightbsd$UNAME_RELEASE ;; *:ekkoBSD:*:*) GUESS=$UNAME_MACHINE-unknown-ekkobsd$UNAME_RELEASE ;; *:SolidBSD:*:*) GUESS=$UNAME_MACHINE-unknown-solidbsd$UNAME_RELEASE ;; *:OS108:*:*) GUESS=$UNAME_MACHINE-unknown-os108_$UNAME_RELEASE ;; macppc:MirBSD:*:*) GUESS=powerpc-unknown-mirbsd$UNAME_RELEASE ;; *:MirBSD:*:*) GUESS=$UNAME_MACHINE-unknown-mirbsd$UNAME_RELEASE ;; *:Sortix:*:*) GUESS=$UNAME_MACHINE-unknown-sortix ;; *:Twizzler:*:*) GUESS=$UNAME_MACHINE-unknown-twizzler ;; *:Redox:*:*) GUESS=$UNAME_MACHINE-unknown-redox ;; mips:OSF1:*.*) GUESS=mips-dec-osf1 ;; alpha:OSF1:*:*) # Reset EXIT trap before exiting to avoid spurious non-zero exit code. trap '' 0 case $UNAME_RELEASE in *4.0) UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` ;; *5.*) UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` ;; esac # According to Compaq, /usr/sbin/psrinfo has been available on # OSF/1 and Tru64 systems produced since 1995. I hope that # covers most systems running today. This code pipes the CPU # types through head -n 1, so we only detect the type of CPU 0. ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` case $ALPHA_CPU_TYPE in "EV4 (21064)") UNAME_MACHINE=alpha ;; "EV4.5 (21064)") UNAME_MACHINE=alpha ;; "LCA4 (21066/21068)") UNAME_MACHINE=alpha ;; "EV5 (21164)") UNAME_MACHINE=alphaev5 ;; "EV5.6 (21164A)") UNAME_MACHINE=alphaev56 ;; "EV5.6 (21164PC)") UNAME_MACHINE=alphapca56 ;; "EV5.7 (21164PC)") UNAME_MACHINE=alphapca57 ;; "EV6 (21264)") UNAME_MACHINE=alphaev6 ;; "EV6.7 (21264A)") UNAME_MACHINE=alphaev67 ;; "EV6.8CB (21264C)") UNAME_MACHINE=alphaev68 ;; "EV6.8AL (21264B)") UNAME_MACHINE=alphaev68 ;; "EV6.8CX (21264D)") UNAME_MACHINE=alphaev68 ;; "EV6.9A (21264/EV69A)") UNAME_MACHINE=alphaev69 ;; "EV7 (21364)") UNAME_MACHINE=alphaev7 ;; "EV7.9 (21364A)") UNAME_MACHINE=alphaev79 ;; esac # A Pn.n version is a patched version. # A Vn.n version is a released version. # A Tn.n version is a released field test version. # A Xn.n version is an unreleased experimental baselevel. # 1.2 uses "1.2" for uname -r. OSF_REL=`echo "$UNAME_RELEASE" | sed -e 's/^[PVTX]//' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz` GUESS=$UNAME_MACHINE-dec-osf$OSF_REL ;; Amiga*:UNIX_System_V:4.0:*) GUESS=m68k-unknown-sysv4 ;; *:[Aa]miga[Oo][Ss]:*:*) GUESS=$UNAME_MACHINE-unknown-amigaos ;; *:[Mm]orph[Oo][Ss]:*:*) GUESS=$UNAME_MACHINE-unknown-morphos ;; *:OS/390:*:*) GUESS=i370-ibm-openedition ;; *:z/VM:*:*) GUESS=s390-ibm-zvmoe ;; *:OS400:*:*) GUESS=powerpc-ibm-os400 ;; arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) GUESS=arm-acorn-riscix$UNAME_RELEASE ;; arm*:riscos:*:*|arm*:RISCOS:*:*) GUESS=arm-unknown-riscos ;; SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) GUESS=hppa1.1-hitachi-hiuxmpp ;; Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. case `(/bin/universe) 2>/dev/null` in att) GUESS=pyramid-pyramid-sysv3 ;; *) GUESS=pyramid-pyramid-bsd ;; esac ;; NILE*:*:*:dcosx) GUESS=pyramid-pyramid-svr4 ;; DRS?6000:unix:4.0:6*) GUESS=sparc-icl-nx6 ;; DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) case `/usr/bin/uname -p` in sparc) GUESS=sparc-icl-nx7 ;; esac ;; s390x:SunOS:*:*) SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'` GUESS=$UNAME_MACHINE-ibm-solaris2$SUN_REL ;; sun4H:SunOS:5.*:*) SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'` GUESS=sparc-hal-solaris2$SUN_REL ;; sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'` GUESS=sparc-sun-solaris2$SUN_REL ;; i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*) GUESS=i386-pc-auroraux$UNAME_RELEASE ;; i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) set_cc_for_build SUN_ARCH=i386 # If there is a compiler, see if it is configured for 64-bit objects. # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. # This test works for both compilers. if test "$CC_FOR_BUILD" != no_compiler_found; then if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ (CCOPTS="" $CC_FOR_BUILD -m64 -E - 2>/dev/null) | \ grep IS_64BIT_ARCH >/dev/null then SUN_ARCH=x86_64 fi fi SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'` GUESS=$SUN_ARCH-pc-solaris2$SUN_REL ;; sun4*:SunOS:6*:*) # According to config.sub, this is the proper way to canonicalize # SunOS6. Hard to guess exactly what SunOS6 will be like, but # it's likely to be more like Solaris than SunOS4. SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'` GUESS=sparc-sun-solaris3$SUN_REL ;; sun4*:SunOS:*:*) case `/usr/bin/arch -k` in Series*|S4*) UNAME_RELEASE=`uname -v` ;; esac # Japanese Language versions have a version number like '4.1.3-JL'. SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/-/_/'` GUESS=sparc-sun-sunos$SUN_REL ;; sun3*:SunOS:*:*) GUESS=m68k-sun-sunos$UNAME_RELEASE ;; sun*:*:4.2BSD:*) UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` test "x$UNAME_RELEASE" = x && UNAME_RELEASE=3 case `/bin/arch` in sun3) GUESS=m68k-sun-sunos$UNAME_RELEASE ;; sun4) GUESS=sparc-sun-sunos$UNAME_RELEASE ;; esac ;; aushp:SunOS:*:*) GUESS=sparc-auspex-sunos$UNAME_RELEASE ;; # The situation for MiNT is a little confusing. The machine name # can be virtually everything (everything which is not # "atarist" or "atariste" at least should have a processor # > m68000). The system name ranges from "MiNT" over "FreeMiNT" # to the lowercase version "mint" (or "freemint"). Finally # the system name "TOS" denotes a system which is actually not # MiNT. But MiNT is downward compatible to TOS, so this should # be no problem. atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) GUESS=m68k-atari-mint$UNAME_RELEASE ;; atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) GUESS=m68k-atari-mint$UNAME_RELEASE ;; *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) GUESS=m68k-atari-mint$UNAME_RELEASE ;; milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) GUESS=m68k-milan-mint$UNAME_RELEASE ;; hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) GUESS=m68k-hades-mint$UNAME_RELEASE ;; *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) GUESS=m68k-unknown-mint$UNAME_RELEASE ;; m68k:machten:*:*) GUESS=m68k-apple-machten$UNAME_RELEASE ;; powerpc:machten:*:*) GUESS=powerpc-apple-machten$UNAME_RELEASE ;; RISC*:Mach:*:*) GUESS=mips-dec-mach_bsd4.3 ;; RISC*:ULTRIX:*:*) GUESS=mips-dec-ultrix$UNAME_RELEASE ;; VAX*:ULTRIX*:*:*) GUESS=vax-dec-ultrix$UNAME_RELEASE ;; 2020:CLIX:*:* | 2430:CLIX:*:*) GUESS=clipper-intergraph-clix$UNAME_RELEASE ;; mips:*:*:UMIPS | mips:*:*:RISCos) set_cc_for_build sed 's/^ //' << EOF > "$dummy.c" #ifdef __cplusplus #include /* for printf() prototype */ int main (int argc, char *argv[]) { #else int main (argc, argv) int argc; char *argv[]; { #endif #if defined (host_mips) && defined (MIPSEB) #if defined (SYSTYPE_SYSV) printf ("mips-mips-riscos%ssysv\\n", argv[1]); exit (0); #endif #if defined (SYSTYPE_SVR4) printf ("mips-mips-riscos%ssvr4\\n", argv[1]); exit (0); #endif #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) printf ("mips-mips-riscos%sbsd\\n", argv[1]); exit (0); #endif #endif exit (-1); } EOF $CC_FOR_BUILD -o "$dummy" "$dummy.c" && dummyarg=`echo "$UNAME_RELEASE" | sed -n 's/\([0-9]*\).*/\1/p'` && SYSTEM_NAME=`"$dummy" "$dummyarg"` && { echo "$SYSTEM_NAME"; exit; } GUESS=mips-mips-riscos$UNAME_RELEASE ;; Motorola:PowerMAX_OS:*:*) GUESS=powerpc-motorola-powermax ;; Motorola:*:4.3:PL8-*) GUESS=powerpc-harris-powermax ;; Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) GUESS=powerpc-harris-powermax ;; Night_Hawk:Power_UNIX:*:*) GUESS=powerpc-harris-powerunix ;; m88k:CX/UX:7*:*) GUESS=m88k-harris-cxux7 ;; m88k:*:4*:R4*) GUESS=m88k-motorola-sysv4 ;; m88k:*:3*:R3*) GUESS=m88k-motorola-sysv3 ;; AViiON:dgux:*:*) # DG/UX returns AViiON for all architectures UNAME_PROCESSOR=`/usr/bin/uname -p` if test "$UNAME_PROCESSOR" = mc88100 || test "$UNAME_PROCESSOR" = mc88110 then if test "$TARGET_BINARY_INTERFACE"x = m88kdguxelfx || \ test "$TARGET_BINARY_INTERFACE"x = x then GUESS=m88k-dg-dgux$UNAME_RELEASE else GUESS=m88k-dg-dguxbcs$UNAME_RELEASE fi else GUESS=i586-dg-dgux$UNAME_RELEASE fi ;; M88*:DolphinOS:*:*) # DolphinOS (SVR3) GUESS=m88k-dolphin-sysv3 ;; M88*:*:R3*:*) # Delta 88k system running SVR3 GUESS=m88k-motorola-sysv3 ;; XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) GUESS=m88k-tektronix-sysv3 ;; Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) GUESS=m68k-tektronix-bsd ;; *:IRIX*:*:*) IRIX_REL=`echo "$UNAME_RELEASE" | sed -e 's/-/_/g'` GUESS=mips-sgi-irix$IRIX_REL ;; ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. GUESS=romp-ibm-aix # uname -m gives an 8 hex-code CPU id ;; # Note that: echo "'`uname -s`'" gives 'AIX ' i*86:AIX:*:*) GUESS=i386-ibm-aix ;; ia64:AIX:*:*) if test -x /usr/bin/oslevel ; then IBM_REV=`/usr/bin/oslevel` else IBM_REV=$UNAME_VERSION.$UNAME_RELEASE fi GUESS=$UNAME_MACHINE-ibm-aix$IBM_REV ;; *:AIX:2:3) if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then set_cc_for_build sed 's/^ //' << EOF > "$dummy.c" #include int main () { if (!__power_pc()) exit(1); puts("powerpc-ibm-aix3.2.5"); exit(0); } EOF if $CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"` then GUESS=$SYSTEM_NAME else GUESS=rs6000-ibm-aix3.2.5 fi elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then GUESS=rs6000-ibm-aix3.2.4 else GUESS=rs6000-ibm-aix3.2 fi ;; *:AIX:*:[4567]) IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` if /usr/sbin/lsattr -El "$IBM_CPU_ID" | grep ' POWER' >/dev/null 2>&1; then IBM_ARCH=rs6000 else IBM_ARCH=powerpc fi if test -x /usr/bin/lslpp ; then IBM_REV=`/usr/bin/lslpp -Lqc bos.rte.libc | \ awk -F: '{ print $3 }' | sed s/[0-9]*$/0/` else IBM_REV=$UNAME_VERSION.$UNAME_RELEASE fi GUESS=$IBM_ARCH-ibm-aix$IBM_REV ;; *:AIX:*:*) GUESS=rs6000-ibm-aix ;; ibmrt:4.4BSD:*|romp-ibm:4.4BSD:*) GUESS=romp-ibm-bsd4.4 ;; ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and GUESS=romp-ibm-bsd$UNAME_RELEASE # 4.3 with uname added to ;; # report: romp-ibm BSD 4.3 *:BOSX:*:*) GUESS=rs6000-bull-bosx ;; DPX/2?00:B.O.S.:*:*) GUESS=m68k-bull-sysv3 ;; 9000/[34]??:4.3bsd:1.*:*) GUESS=m68k-hp-bsd ;; hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) GUESS=m68k-hp-bsd4.4 ;; 9000/[34678]??:HP-UX:*:*) HPUX_REV=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*.[0B]*//'` case $UNAME_MACHINE in 9000/31?) HP_ARCH=m68000 ;; 9000/[34]??) HP_ARCH=m68k ;; 9000/[678][0-9][0-9]) if test -x /usr/bin/getconf; then sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` case $sc_cpu_version in 523) HP_ARCH=hppa1.0 ;; # CPU_PA_RISC1_0 528) HP_ARCH=hppa1.1 ;; # CPU_PA_RISC1_1 532) # CPU_PA_RISC2_0 case $sc_kernel_bits in 32) HP_ARCH=hppa2.0n ;; 64) HP_ARCH=hppa2.0w ;; '') HP_ARCH=hppa2.0 ;; # HP-UX 10.20 esac ;; esac fi if test "$HP_ARCH" = ""; then set_cc_for_build sed 's/^ //' << EOF > "$dummy.c" #define _HPUX_SOURCE #include #include int main () { #if defined(_SC_KERNEL_BITS) long bits = sysconf(_SC_KERNEL_BITS); #endif long cpu = sysconf (_SC_CPU_VERSION); switch (cpu) { case CPU_PA_RISC1_0: puts ("hppa1.0"); break; case CPU_PA_RISC1_1: puts ("hppa1.1"); break; case CPU_PA_RISC2_0: #if defined(_SC_KERNEL_BITS) switch (bits) { case 64: puts ("hppa2.0w"); break; case 32: puts ("hppa2.0n"); break; default: puts ("hppa2.0"); break; } break; #else /* !defined(_SC_KERNEL_BITS) */ puts ("hppa2.0"); break; #endif default: puts ("hppa1.0"); break; } exit (0); } EOF (CCOPTS="" $CC_FOR_BUILD -o "$dummy" "$dummy.c" 2>/dev/null) && HP_ARCH=`"$dummy"` test -z "$HP_ARCH" && HP_ARCH=hppa fi ;; esac if test "$HP_ARCH" = hppa2.0w then set_cc_for_build # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler # generating 64-bit code. GNU and HP use different nomenclature: # # $ CC_FOR_BUILD=cc ./config.guess # => hppa2.0w-hp-hpux11.23 # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess # => hppa64-hp-hpux11.23 if echo __LP64__ | (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | grep -q __LP64__ then HP_ARCH=hppa2.0w else HP_ARCH=hppa64 fi fi GUESS=$HP_ARCH-hp-hpux$HPUX_REV ;; ia64:HP-UX:*:*) HPUX_REV=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*.[0B]*//'` GUESS=ia64-hp-hpux$HPUX_REV ;; 3050*:HI-UX:*:*) set_cc_for_build sed 's/^ //' << EOF > "$dummy.c" #include int main () { long cpu = sysconf (_SC_CPU_VERSION); /* The order matters, because CPU_IS_HP_MC68K erroneously returns true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct results, however. */ if (CPU_IS_PA_RISC (cpu)) { switch (cpu) { case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; default: puts ("hppa-hitachi-hiuxwe2"); break; } } else if (CPU_IS_HP_MC68K (cpu)) puts ("m68k-hitachi-hiuxwe2"); else puts ("unknown-hitachi-hiuxwe2"); exit (0); } EOF $CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"` && { echo "$SYSTEM_NAME"; exit; } GUESS=unknown-hitachi-hiuxwe2 ;; 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:*) GUESS=hppa1.1-hp-bsd ;; 9000/8??:4.3bsd:*:*) GUESS=hppa1.0-hp-bsd ;; *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) GUESS=hppa1.0-hp-mpeix ;; hp7??:OSF1:*:* | hp8?[79]:OSF1:*:*) GUESS=hppa1.1-hp-osf ;; hp8??:OSF1:*:*) GUESS=hppa1.0-hp-osf ;; i*86:OSF1:*:*) if test -x /usr/sbin/sysversion ; then GUESS=$UNAME_MACHINE-unknown-osf1mk else GUESS=$UNAME_MACHINE-unknown-osf1 fi ;; parisc*:Lites*:*:*) GUESS=hppa1.1-hp-lites ;; C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) GUESS=c1-convex-bsd ;; C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) if getsysinfo -f scalar_acc then echo c32-convex-bsd else echo c2-convex-bsd fi exit ;; C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) GUESS=c34-convex-bsd ;; C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) GUESS=c38-convex-bsd ;; C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) GUESS=c4-convex-bsd ;; CRAY*Y-MP:*:*:*) CRAY_REL=`echo "$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'` GUESS=ymp-cray-unicos$CRAY_REL ;; CRAY*[A-Z]90:*:*:*) echo "$UNAME_MACHINE"-cray-unicos"$UNAME_RELEASE" \ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ -e 's/\.[^.]*$/.X/' exit ;; CRAY*TS:*:*:*) CRAY_REL=`echo "$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'` GUESS=t90-cray-unicos$CRAY_REL ;; CRAY*T3E:*:*:*) CRAY_REL=`echo "$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'` GUESS=alphaev5-cray-unicosmk$CRAY_REL ;; CRAY*SV1:*:*:*) CRAY_REL=`echo "$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'` GUESS=sv1-cray-unicos$CRAY_REL ;; *:UNICOS/mp:*:*) CRAY_REL=`echo "$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'` GUESS=craynv-cray-unicosmp$CRAY_REL ;; F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) FUJITSU_PROC=`uname -m | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz` FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'` FUJITSU_REL=`echo "$UNAME_RELEASE" | sed -e 's/ /_/'` GUESS=${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL} ;; 5000:UNIX_System_V:4.*:*) FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'` FUJITSU_REL=`echo "$UNAME_RELEASE" | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/ /_/'` GUESS=sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL} ;; i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) GUESS=$UNAME_MACHINE-pc-bsdi$UNAME_RELEASE ;; sparc*:BSD/OS:*:*) GUESS=sparc-unknown-bsdi$UNAME_RELEASE ;; *:BSD/OS:*:*) GUESS=$UNAME_MACHINE-unknown-bsdi$UNAME_RELEASE ;; arm:FreeBSD:*:*) UNAME_PROCESSOR=`uname -p` set_cc_for_build if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \ | grep -q __ARM_PCS_VFP then FREEBSD_REL=`echo "$UNAME_RELEASE" | sed -e 's/[-(].*//'` GUESS=$UNAME_PROCESSOR-unknown-freebsd$FREEBSD_REL-gnueabi else FREEBSD_REL=`echo "$UNAME_RELEASE" | sed -e 's/[-(].*//'` GUESS=$UNAME_PROCESSOR-unknown-freebsd$FREEBSD_REL-gnueabihf fi ;; *:FreeBSD:*:*) UNAME_PROCESSOR=`uname -p` case $UNAME_PROCESSOR in amd64) UNAME_PROCESSOR=x86_64 ;; i386) UNAME_PROCESSOR=i586 ;; esac FREEBSD_REL=`echo "$UNAME_RELEASE" | sed -e 's/[-(].*//'` GUESS=$UNAME_PROCESSOR-unknown-freebsd$FREEBSD_REL ;; i*:CYGWIN*:*) GUESS=$UNAME_MACHINE-pc-cygwin ;; *:MINGW64*:*) GUESS=$UNAME_MACHINE-pc-mingw64 ;; *:MINGW*:*) GUESS=$UNAME_MACHINE-pc-mingw32 ;; *:MSYS*:*) GUESS=$UNAME_MACHINE-pc-msys ;; i*:PW*:*) GUESS=$UNAME_MACHINE-pc-pw32 ;; *:SerenityOS:*:*) GUESS=$UNAME_MACHINE-pc-serenity ;; *:Interix*:*) case $UNAME_MACHINE in x86) GUESS=i586-pc-interix$UNAME_RELEASE ;; authenticamd | genuineintel | EM64T) GUESS=x86_64-unknown-interix$UNAME_RELEASE ;; IA64) GUESS=ia64-unknown-interix$UNAME_RELEASE ;; esac ;; i*:UWIN*:*) GUESS=$UNAME_MACHINE-pc-uwin ;; amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) GUESS=x86_64-pc-cygwin ;; prep*:SunOS:5.*:*) SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'` GUESS=powerpcle-unknown-solaris2$SUN_REL ;; *:GNU:*:*) # the GNU system GNU_ARCH=`echo "$UNAME_MACHINE" | sed -e 's,[-/].*$,,'` GNU_REL=`echo "$UNAME_RELEASE" | sed -e 's,/.*$,,'` GUESS=$GNU_ARCH-unknown-$LIBC$GNU_REL ;; *:GNU/*:*:*) # other systems with GNU libc and userland GNU_SYS=`echo "$UNAME_SYSTEM" | sed 's,^[^/]*/,,' | tr "[:upper:]" "[:lower:]"` GNU_REL=`echo "$UNAME_RELEASE" | sed -e 's/[-(].*//'` GUESS=$UNAME_MACHINE-unknown-$GNU_SYS$GNU_REL-$LIBC ;; x86_64:[Mm]anagarm:*:*|i?86:[Mm]anagarm:*:*) GUESS="$UNAME_MACHINE-pc-managarm-mlibc" ;; *:[Mm]anagarm:*:*) GUESS="$UNAME_MACHINE-unknown-managarm-mlibc" ;; *:Minix:*:*) GUESS=$UNAME_MACHINE-unknown-minix ;; aarch64:Linux:*:*) set_cc_for_build CPU=$UNAME_MACHINE LIBCABI=$LIBC if test "$CC_FOR_BUILD" != no_compiler_found; then ABI=64 sed 's/^ //' << EOF > "$dummy.c" #ifdef __ARM_EABI__ #ifdef __ARM_PCS_VFP ABI=eabihf #else ABI=eabi #endif #endif EOF cc_set_abi=`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^ABI' | sed 's, ,,g'` eval "$cc_set_abi" case $ABI in eabi | eabihf) CPU=armv8l; LIBCABI=$LIBC$ABI ;; esac fi GUESS=$CPU-unknown-linux-$LIBCABI ;; aarch64_be:Linux:*:*) UNAME_MACHINE=aarch64_be GUESS=$UNAME_MACHINE-unknown-linux-$LIBC ;; alpha:Linux:*:*) case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' /proc/cpuinfo 2>/dev/null` in EV5) UNAME_MACHINE=alphaev5 ;; EV56) UNAME_MACHINE=alphaev56 ;; PCA56) UNAME_MACHINE=alphapca56 ;; PCA57) UNAME_MACHINE=alphapca56 ;; EV6) UNAME_MACHINE=alphaev6 ;; EV67) UNAME_MACHINE=alphaev67 ;; EV68*) UNAME_MACHINE=alphaev68 ;; esac objdump --private-headers /bin/sh | grep -q ld.so.1 if test "$?" = 0 ; then LIBC=gnulibc1 ; fi GUESS=$UNAME_MACHINE-unknown-linux-$LIBC ;; arc:Linux:*:* | arceb:Linux:*:* | arc32:Linux:*:* | arc64:Linux:*:*) GUESS=$UNAME_MACHINE-unknown-linux-$LIBC ;; arm*:Linux:*:*) set_cc_for_build if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ | grep -q __ARM_EABI__ then GUESS=$UNAME_MACHINE-unknown-linux-$LIBC else if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \ | grep -q __ARM_PCS_VFP then GUESS=$UNAME_MACHINE-unknown-linux-${LIBC}eabi else GUESS=$UNAME_MACHINE-unknown-linux-${LIBC}eabihf fi fi ;; avr32*:Linux:*:*) GUESS=$UNAME_MACHINE-unknown-linux-$LIBC ;; cris:Linux:*:*) GUESS=$UNAME_MACHINE-axis-linux-$LIBC ;; crisv32:Linux:*:*) GUESS=$UNAME_MACHINE-axis-linux-$LIBC ;; e2k:Linux:*:*) GUESS=$UNAME_MACHINE-unknown-linux-$LIBC ;; frv:Linux:*:*) GUESS=$UNAME_MACHINE-unknown-linux-$LIBC ;; hexagon:Linux:*:*) GUESS=$UNAME_MACHINE-unknown-linux-$LIBC ;; i*86:Linux:*:*) GUESS=$UNAME_MACHINE-pc-linux-$LIBC ;; ia64:Linux:*:*) GUESS=$UNAME_MACHINE-unknown-linux-$LIBC ;; k1om:Linux:*:*) GUESS=$UNAME_MACHINE-unknown-linux-$LIBC ;; kvx:Linux:*:*) GUESS=$UNAME_MACHINE-unknown-linux-$LIBC ;; kvx:cos:*:*) GUESS=$UNAME_MACHINE-unknown-cos ;; kvx:mbr:*:*) GUESS=$UNAME_MACHINE-unknown-mbr ;; loongarch32:Linux:*:* | loongarch64:Linux:*:*) GUESS=$UNAME_MACHINE-unknown-linux-$LIBC ;; m32r*:Linux:*:*) GUESS=$UNAME_MACHINE-unknown-linux-$LIBC ;; m68*:Linux:*:*) GUESS=$UNAME_MACHINE-unknown-linux-$LIBC ;; mips:Linux:*:* | mips64:Linux:*:*) set_cc_for_build IS_GLIBC=0 test x"${LIBC}" = xgnu && IS_GLIBC=1 sed 's/^ //' << EOF > "$dummy.c" #undef CPU #undef mips #undef mipsel #undef mips64 #undef mips64el #if ${IS_GLIBC} && defined(_ABI64) LIBCABI=gnuabi64 #else #if ${IS_GLIBC} && defined(_ABIN32) LIBCABI=gnuabin32 #else LIBCABI=${LIBC} #endif #endif #if ${IS_GLIBC} && defined(__mips64) && defined(__mips_isa_rev) && __mips_isa_rev>=6 CPU=mipsisa64r6 #else #if ${IS_GLIBC} && !defined(__mips64) && defined(__mips_isa_rev) && __mips_isa_rev>=6 CPU=mipsisa32r6 #else #if defined(__mips64) CPU=mips64 #else CPU=mips #endif #endif #endif #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) MIPS_ENDIAN=el #else #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) MIPS_ENDIAN= #else MIPS_ENDIAN= #endif #endif EOF cc_set_vars=`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^CPU\|^MIPS_ENDIAN\|^LIBCABI'` eval "$cc_set_vars" test "x$CPU" != x && { echo "$CPU${MIPS_ENDIAN}-unknown-linux-$LIBCABI"; exit; } ;; mips64el:Linux:*:*) GUESS=$UNAME_MACHINE-unknown-linux-$LIBC ;; openrisc*:Linux:*:*) GUESS=or1k-unknown-linux-$LIBC ;; or32:Linux:*:* | or1k*:Linux:*:*) GUESS=$UNAME_MACHINE-unknown-linux-$LIBC ;; padre:Linux:*:*) GUESS=sparc-unknown-linux-$LIBC ;; parisc64:Linux:*:* | hppa64:Linux:*:*) GUESS=hppa64-unknown-linux-$LIBC ;; parisc:Linux:*:* | hppa:Linux:*:*) # Look for CPU level case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in PA7*) GUESS=hppa1.1-unknown-linux-$LIBC ;; PA8*) GUESS=hppa2.0-unknown-linux-$LIBC ;; *) GUESS=hppa-unknown-linux-$LIBC ;; esac ;; ppc64:Linux:*:*) GUESS=powerpc64-unknown-linux-$LIBC ;; ppc:Linux:*:*) GUESS=powerpc-unknown-linux-$LIBC ;; ppc64le:Linux:*:*) GUESS=powerpc64le-unknown-linux-$LIBC ;; ppcle:Linux:*:*) GUESS=powerpcle-unknown-linux-$LIBC ;; riscv32:Linux:*:* | riscv32be:Linux:*:* | riscv64:Linux:*:* | riscv64be:Linux:*:*) GUESS=$UNAME_MACHINE-unknown-linux-$LIBC ;; s390:Linux:*:* | s390x:Linux:*:*) GUESS=$UNAME_MACHINE-ibm-linux-$LIBC ;; sh64*:Linux:*:*) GUESS=$UNAME_MACHINE-unknown-linux-$LIBC ;; sh*:Linux:*:*) GUESS=$UNAME_MACHINE-unknown-linux-$LIBC ;; sparc:Linux:*:* | sparc64:Linux:*:*) GUESS=$UNAME_MACHINE-unknown-linux-$LIBC ;; tile*:Linux:*:*) GUESS=$UNAME_MACHINE-unknown-linux-$LIBC ;; vax:Linux:*:*) GUESS=$UNAME_MACHINE-dec-linux-$LIBC ;; x86_64:Linux:*:*) set_cc_for_build CPU=$UNAME_MACHINE LIBCABI=$LIBC if test "$CC_FOR_BUILD" != no_compiler_found; then ABI=64 sed 's/^ //' << EOF > "$dummy.c" #ifdef __i386__ ABI=x86 #else #ifdef __ILP32__ ABI=x32 #endif #endif EOF cc_set_abi=`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^ABI' | sed 's, ,,g'` eval "$cc_set_abi" case $ABI in x86) CPU=i686 ;; x32) LIBCABI=${LIBC}x32 ;; esac fi GUESS=$CPU-pc-linux-$LIBCABI ;; xtensa*:Linux:*:*) GUESS=$UNAME_MACHINE-unknown-linux-$LIBC ;; i*86:DYNIX/ptx:4*:*) # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. # earlier versions are messed up and put the nodename in both # sysname and nodename. GUESS=i386-sequent-sysv4 ;; i*86:UNIX_SV:4.2MP:2.*) # Unixware is an offshoot of SVR4, but it has its own version # number series starting with 2... # I am not positive that other SVR4 systems won't match this, # I just have to hope. -- rms. # Use sysv4.2uw... so that sysv4* matches it. GUESS=$UNAME_MACHINE-pc-sysv4.2uw$UNAME_VERSION ;; i*86:OS/2:*:*) # If we were able to find 'uname', then EMX Unix compatibility # is probably installed. GUESS=$UNAME_MACHINE-pc-os2-emx ;; i*86:XTS-300:*:STOP) GUESS=$UNAME_MACHINE-unknown-stop ;; i*86:atheos:*:*) GUESS=$UNAME_MACHINE-unknown-atheos ;; i*86:syllable:*:*) GUESS=$UNAME_MACHINE-pc-syllable ;; i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*) GUESS=i386-unknown-lynxos$UNAME_RELEASE ;; i*86:*DOS:*:*) GUESS=$UNAME_MACHINE-pc-msdosdjgpp ;; i*86:*:4.*:*) UNAME_REL=`echo "$UNAME_RELEASE" | sed 's/\/MP$//'` if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then GUESS=$UNAME_MACHINE-univel-sysv$UNAME_REL else GUESS=$UNAME_MACHINE-pc-sysv$UNAME_REL fi ;; i*86:*:5:[678]*) # UnixWare 7.x, OpenUNIX and OpenServer 6. case `/bin/uname -X | grep "^Machine"` in *486*) UNAME_MACHINE=i486 ;; *Pentium) UNAME_MACHINE=i586 ;; *Pent*|*Celeron) UNAME_MACHINE=i686 ;; esac GUESS=$UNAME_MACHINE-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} ;; i*86:*:3.2:*) if test -f /usr/options/cb.name; then UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ && UNAME_MACHINE=i586 (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ && UNAME_MACHINE=i686 (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ && UNAME_MACHINE=i686 GUESS=$UNAME_MACHINE-pc-sco$UNAME_REL else GUESS=$UNAME_MACHINE-pc-sysv32 fi ;; pc:*:*:*) # Left here for compatibility: # uname -m prints for DJGPP always 'pc', but it prints nothing about # the processor, so we play safe by assuming i586. # Note: whatever this is, it MUST be the same as what config.sub # prints for the "djgpp" host, or else GDB configure will decide that # this is a cross-build. GUESS=i586-pc-msdosdjgpp ;; Intel:Mach:3*:*) GUESS=i386-pc-mach3 ;; paragon:*:*:*) GUESS=i860-intel-osf1 ;; i860:*:4.*:*) # i860-SVR4 if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then GUESS=i860-stardent-sysv$UNAME_RELEASE # Stardent Vistra i860-SVR4 else # Add other i860-SVR4 vendors below as they are discovered. GUESS=i860-unknown-sysv$UNAME_RELEASE # Unknown i860-SVR4 fi ;; mini*:CTIX:SYS*5:*) # "miniframe" GUESS=m68010-convergent-sysv ;; mc68k:UNIX:SYSTEM5:3.51m) GUESS=m68k-convergent-sysv ;; M680?0:D-NIX:5.3:*) GUESS=m68k-diab-dnix ;; M68*:*:R3V[5678]*:*) test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) OS_REL='' test -r /etc/.relid \ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && { echo i486-ncr-sysv4.3"$OS_REL"; exit; } /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;; 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && { echo i486-ncr-sysv4; exit; } ;; NCR*:*:4.2:* | MPRAS*:*:4.2:*) OS_REL='.3' test -r /etc/.relid \ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && { echo i486-ncr-sysv4.3"$OS_REL"; exit; } /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \ && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;; m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) GUESS=m68k-unknown-lynxos$UNAME_RELEASE ;; mc68030:UNIX_System_V:4.*:*) GUESS=m68k-atari-sysv4 ;; TSUNAMI:LynxOS:2.*:*) GUESS=sparc-unknown-lynxos$UNAME_RELEASE ;; rs6000:LynxOS:2.*:*) GUESS=rs6000-unknown-lynxos$UNAME_RELEASE ;; PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*) GUESS=powerpc-unknown-lynxos$UNAME_RELEASE ;; SM[BE]S:UNIX_SV:*:*) GUESS=mips-dde-sysv$UNAME_RELEASE ;; RM*:ReliantUNIX-*:*:*) GUESS=mips-sni-sysv4 ;; RM*:SINIX-*:*:*) GUESS=mips-sni-sysv4 ;; *:SINIX-*:*:*) if uname -p 2>/dev/null >/dev/null ; then UNAME_MACHINE=`(uname -p) 2>/dev/null` GUESS=$UNAME_MACHINE-sni-sysv4 else GUESS=ns32k-sni-sysv fi ;; PENTIUM:*:4.0*:*) # Unisys 'ClearPath HMP IX 4000' SVR4/MP effort # says GUESS=i586-unisys-sysv4 ;; *:UNIX_System_V:4*:FTX*) # From Gerald Hewes . # How about differentiating between stratus architectures? -djm GUESS=hppa1.1-stratus-sysv4 ;; *:*:*:FTX*) # From seanf@swdc.stratus.com. GUESS=i860-stratus-sysv4 ;; i*86:VOS:*:*) # From Paul.Green@stratus.com. GUESS=$UNAME_MACHINE-stratus-vos ;; *:VOS:*:*) # From Paul.Green@stratus.com. GUESS=hppa1.1-stratus-vos ;; mc68*:A/UX:*:*) GUESS=m68k-apple-aux$UNAME_RELEASE ;; news*:NEWS-OS:6*:*) GUESS=mips-sony-newsos6 ;; R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) if test -d /usr/nec; then GUESS=mips-nec-sysv$UNAME_RELEASE else GUESS=mips-unknown-sysv$UNAME_RELEASE fi ;; BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. GUESS=powerpc-be-beos ;; BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. GUESS=powerpc-apple-beos ;; BePC:BeOS:*:*) # BeOS running on Intel PC compatible. GUESS=i586-pc-beos ;; BePC:Haiku:*:*) # Haiku running on Intel PC compatible. GUESS=i586-pc-haiku ;; ppc:Haiku:*:*) # Haiku running on Apple PowerPC GUESS=powerpc-apple-haiku ;; *:Haiku:*:*) # Haiku modern gcc (not bound by BeOS compat) GUESS=$UNAME_MACHINE-unknown-haiku ;; SX-4:SUPER-UX:*:*) GUESS=sx4-nec-superux$UNAME_RELEASE ;; SX-5:SUPER-UX:*:*) GUESS=sx5-nec-superux$UNAME_RELEASE ;; SX-6:SUPER-UX:*:*) GUESS=sx6-nec-superux$UNAME_RELEASE ;; SX-7:SUPER-UX:*:*) GUESS=sx7-nec-superux$UNAME_RELEASE ;; SX-8:SUPER-UX:*:*) GUESS=sx8-nec-superux$UNAME_RELEASE ;; SX-8R:SUPER-UX:*:*) GUESS=sx8r-nec-superux$UNAME_RELEASE ;; SX-ACE:SUPER-UX:*:*) GUESS=sxace-nec-superux$UNAME_RELEASE ;; Power*:Rhapsody:*:*) GUESS=powerpc-apple-rhapsody$UNAME_RELEASE ;; *:Rhapsody:*:*) GUESS=$UNAME_MACHINE-apple-rhapsody$UNAME_RELEASE ;; arm64:Darwin:*:*) GUESS=aarch64-apple-darwin$UNAME_RELEASE ;; *:Darwin:*:*) UNAME_PROCESSOR=`uname -p` case $UNAME_PROCESSOR in unknown) UNAME_PROCESSOR=powerpc ;; esac if command -v xcode-select > /dev/null 2> /dev/null && \ ! xcode-select --print-path > /dev/null 2> /dev/null ; then # Avoid executing cc if there is no toolchain installed as # cc will be a stub that puts up a graphical alert # prompting the user to install developer tools. CC_FOR_BUILD=no_compiler_found else set_cc_for_build fi if test "$CC_FOR_BUILD" != no_compiler_found; then if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \ (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ grep IS_64BIT_ARCH >/dev/null then case $UNAME_PROCESSOR in i386) UNAME_PROCESSOR=x86_64 ;; powerpc) UNAME_PROCESSOR=powerpc64 ;; esac fi # On 10.4-10.6 one might compile for PowerPC via gcc -arch ppc if (echo '#ifdef __POWERPC__'; echo IS_PPC; echo '#endif') | \ (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ grep IS_PPC >/dev/null then UNAME_PROCESSOR=powerpc fi elif test "$UNAME_PROCESSOR" = i386 ; then # uname -m returns i386 or x86_64 UNAME_PROCESSOR=$UNAME_MACHINE fi GUESS=$UNAME_PROCESSOR-apple-darwin$UNAME_RELEASE ;; *:procnto*:*:* | *:QNX:[0123456789]*:*) UNAME_PROCESSOR=`uname -p` if test "$UNAME_PROCESSOR" = x86; then UNAME_PROCESSOR=i386 UNAME_MACHINE=pc fi GUESS=$UNAME_PROCESSOR-$UNAME_MACHINE-nto-qnx$UNAME_RELEASE ;; *:QNX:*:4*) GUESS=i386-pc-qnx ;; NEO-*:NONSTOP_KERNEL:*:*) GUESS=neo-tandem-nsk$UNAME_RELEASE ;; NSE-*:NONSTOP_KERNEL:*:*) GUESS=nse-tandem-nsk$UNAME_RELEASE ;; NSR-*:NONSTOP_KERNEL:*:*) GUESS=nsr-tandem-nsk$UNAME_RELEASE ;; NSV-*:NONSTOP_KERNEL:*:*) GUESS=nsv-tandem-nsk$UNAME_RELEASE ;; NSX-*:NONSTOP_KERNEL:*:*) GUESS=nsx-tandem-nsk$UNAME_RELEASE ;; *:NonStop-UX:*:*) GUESS=mips-compaq-nonstopux ;; BS2000:POSIX*:*:*) GUESS=bs2000-siemens-sysv ;; DS/*:UNIX_System_V:*:*) GUESS=$UNAME_MACHINE-$UNAME_SYSTEM-$UNAME_RELEASE ;; *:Plan9:*:*) # "uname -m" is not consistent, so use $cputype instead. 386 # is converted to i386 for consistency with other x86 # operating systems. if test "${cputype-}" = 386; then UNAME_MACHINE=i386 elif test "x${cputype-}" != x; then UNAME_MACHINE=$cputype fi GUESS=$UNAME_MACHINE-unknown-plan9 ;; *:TOPS-10:*:*) GUESS=pdp10-unknown-tops10 ;; *:TENEX:*:*) GUESS=pdp10-unknown-tenex ;; KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) GUESS=pdp10-dec-tops20 ;; XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) GUESS=pdp10-xkl-tops20 ;; *:TOPS-20:*:*) GUESS=pdp10-unknown-tops20 ;; *:ITS:*:*) GUESS=pdp10-unknown-its ;; SEI:*:*:SEIUX) GUESS=mips-sei-seiux$UNAME_RELEASE ;; *:DragonFly:*:*) DRAGONFLY_REL=`echo "$UNAME_RELEASE" | sed -e 's/[-(].*//'` GUESS=$UNAME_MACHINE-unknown-dragonfly$DRAGONFLY_REL ;; *:*VMS:*:*) UNAME_MACHINE=`(uname -p) 2>/dev/null` case $UNAME_MACHINE in A*) GUESS=alpha-dec-vms ;; I*) GUESS=ia64-dec-vms ;; V*) GUESS=vax-dec-vms ;; esac ;; *:XENIX:*:SysV) GUESS=i386-pc-xenix ;; i*86:skyos:*:*) SKYOS_REL=`echo "$UNAME_RELEASE" | sed -e 's/ .*$//'` GUESS=$UNAME_MACHINE-pc-skyos$SKYOS_REL ;; i*86:rdos:*:*) GUESS=$UNAME_MACHINE-pc-rdos ;; i*86:Fiwix:*:*) GUESS=$UNAME_MACHINE-pc-fiwix ;; *:AROS:*:*) GUESS=$UNAME_MACHINE-unknown-aros ;; x86_64:VMkernel:*:*) GUESS=$UNAME_MACHINE-unknown-esx ;; amd64:Isilon\ OneFS:*:*) GUESS=x86_64-unknown-onefs ;; *:Unleashed:*:*) GUESS=$UNAME_MACHINE-unknown-unleashed$UNAME_RELEASE ;; *:Ironclad:*:*) GUESS=$UNAME_MACHINE-unknown-ironclad ;; esac # Do we have a guess based on uname results? if test "x$GUESS" != x; then echo "$GUESS" exit fi # No uname command or uname output not recognized. set_cc_for_build cat > "$dummy.c" < #include #endif #if defined(ultrix) || defined(_ultrix) || defined(__ultrix) || defined(__ultrix__) #if defined (vax) || defined (__vax) || defined (__vax__) || defined(mips) || defined(__mips) || defined(__mips__) || defined(MIPS) || defined(__MIPS__) #include #if defined(_SIZE_T_) || defined(SIGLOST) #include #endif #endif #endif int main () { #if defined (sony) #if defined (MIPSEB) /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, I don't know.... */ printf ("mips-sony-bsd\n"); exit (0); #else #include printf ("m68k-sony-newsos%s\n", #ifdef NEWSOS4 "4" #else "" #endif ); exit (0); #endif #endif #if defined (NeXT) #if !defined (__ARCHITECTURE__) #define __ARCHITECTURE__ "m68k" #endif int version; version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; if (version < 4) printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); else printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); exit (0); #endif #if defined (MULTIMAX) || defined (n16) #if defined (UMAXV) printf ("ns32k-encore-sysv\n"); exit (0); #else #if defined (CMU) printf ("ns32k-encore-mach\n"); exit (0); #else printf ("ns32k-encore-bsd\n"); exit (0); #endif #endif #endif #if defined (__386BSD__) printf ("i386-pc-bsd\n"); exit (0); #endif #if defined (sequent) #if defined (i386) printf ("i386-sequent-dynix\n"); exit (0); #endif #if defined (ns32000) printf ("ns32k-sequent-dynix\n"); exit (0); #endif #endif #if defined (_SEQUENT_) struct utsname un; uname(&un); if (strncmp(un.version, "V2", 2) == 0) { printf ("i386-sequent-ptx2\n"); exit (0); } if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ printf ("i386-sequent-ptx1\n"); exit (0); } printf ("i386-sequent-ptx\n"); exit (0); #endif #if defined (vax) #if !defined (ultrix) #include #if defined (BSD) #if BSD == 43 printf ("vax-dec-bsd4.3\n"); exit (0); #else #if BSD == 199006 printf ("vax-dec-bsd4.3reno\n"); exit (0); #else printf ("vax-dec-bsd\n"); exit (0); #endif #endif #else printf ("vax-dec-bsd\n"); exit (0); #endif #else #if defined(_SIZE_T_) || defined(SIGLOST) struct utsname un; uname (&un); printf ("vax-dec-ultrix%s\n", un.release); exit (0); #else printf ("vax-dec-ultrix\n"); exit (0); #endif #endif #endif #if defined(ultrix) || defined(_ultrix) || defined(__ultrix) || defined(__ultrix__) #if defined(mips) || defined(__mips) || defined(__mips__) || defined(MIPS) || defined(__MIPS__) #if defined(_SIZE_T_) || defined(SIGLOST) struct utsname *un; uname (&un); printf ("mips-dec-ultrix%s\n", un.release); exit (0); #else printf ("mips-dec-ultrix\n"); exit (0); #endif #endif #endif #if defined (alliant) && defined (i860) printf ("i860-alliant-bsd\n"); exit (0); #endif exit (1); } EOF $CC_FOR_BUILD -o "$dummy" "$dummy.c" 2>/dev/null && SYSTEM_NAME=`"$dummy"` && { echo "$SYSTEM_NAME"; exit; } # Apollos put the system type in the environment. test -d /usr/apollo && { echo "$ISP-apollo-$SYSTYPE"; exit; } echo "$0: unable to guess system type" >&2 case $UNAME_MACHINE:$UNAME_SYSTEM in mips:Linux | mips64:Linux) # If we got here on MIPS GNU/Linux, output extra information. cat >&2 <&2 <&2 </dev/null || echo unknown` uname -r = `(uname -r) 2>/dev/null || echo unknown` uname -s = `(uname -s) 2>/dev/null || echo unknown` uname -v = `(uname -v) 2>/dev/null || echo unknown` /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` /bin/uname -X = `(/bin/uname -X) 2>/dev/null` hostinfo = `(hostinfo) 2>/dev/null` /bin/universe = `(/bin/universe) 2>/dev/null` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` /bin/arch = `(/bin/arch) 2>/dev/null` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` UNAME_MACHINE = "$UNAME_MACHINE" UNAME_RELEASE = "$UNAME_RELEASE" UNAME_SYSTEM = "$UNAME_SYSTEM" UNAME_VERSION = "$UNAME_VERSION" EOF fi exit 1 # Local variables: # eval: (add-hook 'before-save-hook 'time-stamp) # time-stamp-start: "timestamp='" # time-stamp-format: "%:y-%02m-%02d" # time-stamp-end: "'" # End: image-acquisition-0.2.6/src/PaxHeaders/cl_img_win.cc0000644000000000000000000000006214664627164017434 xustar0020 atime=1725116020 30 ctime=1725116039.688927658 image-acquisition-0.2.6/src/cl_img_win.cc0000644000175000017500000000445014664627164020327 0ustar00andyandy00000000000000// Copyright (C) 2014 Andreas Weber // // This program is free software; you can redistribute it and/or modify it under // the terms of the GNU General Public License as published by the Free Software // Foundation; either version 3 of the License, or (at your option) any later // version. // // This program is distributed in the hope that it will be useful, but WITHOUT // ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or // FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more // details. // // You should have received a copy of the GNU General Public License along with // this program; if not, see . /*! 10.01.2014 Andreas Weber /file img_win.cpp */ #include "cl_img_win.h" #include #include img_win::img_win (int x, int y, int w, int h) :Fl_Double_Window (x, y, w, h, "img_win"), pixel(NULL), RGB(0) { Fl::visual(FL_RGB); //cout << "img_win::img_win C'Tor" << endl; // create test image uchar tmp[w*h]; for(int x=0; x